From abda7383ec3a2efc0417d3265b7a872e74fe47e7 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Wed, 1 Mar 2023 21:14:34 +0100 Subject: thermal: Remove debug or error messages in get_temp() ops Some get_temp() ops implementation are showing an error or a debug message if the reading of the sensor fails. The debug message is already displayed from the call site of this ops. So we can remove it. On the other side, the error should not be displayed because in production that can raise tons of messages. Finally, some drivers are showing a debug message with the temperature, this is also accessible through the trace from the core code in the temperature_update() function. Another benefit is the dev_* messages are accessing the thermal zone device field from the structure, so we encapsulate even more the code by preventing these accesses. Remove those messages. Signed-off-by: Daniel Lezcano Reviewed-by: Miquel Raynal #Armada Acked-by: Florian Fainelli #brcmstb_thermal.c Acked-by: Heiko Stuebner #rockchip Signed-off-by: Rafael J. Wysocki --- drivers/thermal/dove_thermal.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/thermal/dove_thermal.c') diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index 6db1882e8229..9954040d1d2c 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -91,11 +91,8 @@ static int dove_get_temp(struct thermal_zone_device *thermal, /* Valid check */ reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG); - if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) { - dev_err(&thermal->device, - "Temperature sensor reading not valid\n"); + if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) return -EIO; - } /* * Calculate temperature. According to Marvell internal -- cgit v1.2.3