From c38fa07dc69f0b9e6f43ecab96dc7861a70c827c Mon Sep 17 00:00:00 2001 From: Gil Fine Date: Fri, 1 Mar 2024 15:22:53 +0200 Subject: thunderbolt: Fix wake configurations after device unplug Currently we don't configure correctly the wake events after unplug of device router. What can happen is that the downstream ports of host router will be configured to wake on: USB4-wake and wake-on-disconnect, but not on wake-on-connect. This may cause the later plugged device not to wake the domain and fail in enumeration. Fix this by clearing downstream port's "USB4 Port is Configured" bit, after unplug of a device router. Signed-off-by: Gil Fine Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg --- drivers/thunderbolt/switch.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/thunderbolt/switch.c') diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 6ffc4e81ffed..4edfd6e34e31 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -3180,22 +3180,29 @@ void tb_switch_unconfigure_link(struct tb_switch *sw) { struct tb_port *up, *down; - if (sw->is_unplugged) - return; if (!tb_route(sw) || tb_switch_is_icm(sw)) return; + /* + * Unconfigure downstream port so that wake-on-connect can be + * configured after router unplug. No need to unconfigure upstream port + * since its router is unplugged. + */ up = tb_upstream_port(sw); - if (tb_switch_is_usb4(up->sw)) - usb4_port_unconfigure(up); - else - tb_lc_unconfigure_port(up); - down = up->remote; if (tb_switch_is_usb4(down->sw)) usb4_port_unconfigure(down); else tb_lc_unconfigure_port(down); + + if (sw->is_unplugged) + return; + + up = tb_upstream_port(sw); + if (tb_switch_is_usb4(up->sw)) + usb4_port_unconfigure(up); + else + tb_lc_unconfigure_port(up); } static void tb_switch_credits_init(struct tb_switch *sw) -- cgit v1.2.3