From 06315348b16178e4c006e7892ef8e5e65f49c66a Mon Sep 17 00:00:00 2001 From: Søren Holm Date: Fri, 2 Sep 2011 22:55:37 +0200 Subject: serial: Support the EFR-register of XR1715x uarts. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EFR (Enhenced-Features-Register) is located at a different offset than the other devices supporting UART_CAP_EFR. This change add a special setup quick to set UPF_EXAR_EFR on the port. UPF_EXAR_EFR is then used to the port type to PORT_XR17D15X since it is for sure a XR17D15X uart. Signed-off-by: Søren Holm Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers/tty/serial/8250_pci.c') diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 6b887d90a205..a79caba96d12 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1101,6 +1101,15 @@ static int pci_eg20t_init(struct pci_dev *dev) #endif } +static int +pci_xr17c154_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_EXAR_EFR; + return pci_default_setup(priv, board, port, idx); +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -1505,6 +1514,30 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_timedia_setup, }, + /* + * Exar cards + */ + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C152, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C154, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C158, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, /* * Xircom cards */ -- cgit v1.2.3 From 64d91cfaade2155ad048fe3b65238a052e29dde4 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Fri, 7 Oct 2011 13:39:49 +0900 Subject: 8250_pci: Fix kernel panic when pch_uart is disabled Currently, ".setup" function is not set. As a result, when detecting our IOH's uart device without pch_uart, kernel panic occurs at the following of pciserial_init_ports(). for (i = 0; i < nr_ports; i++) { if (quirk->setup(priv, board, &serial_port, i)) break; So, this patch adds the ".setup" function. We can use pci_default_setup because our IOH's uart is compatible with 16550. Signed-off-by: Tomoya MORINAGA Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/tty/serial/8250_pci.c') diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index a79caba96d12..1b449b759990 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1591,51 +1591,61 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8811, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8812, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8813, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8814, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8027, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8028, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8029, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800C, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800D, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800D, .init = pci_eg20t_init, + .setup = pci_default_setup, }, /* * Cronyx Omega PCI (PLX-chip based) -- cgit v1.2.3