From 2411fd94ceaa6e11326e95d6ebf876cbfed28d23 Mon Sep 17 00:00:00 2001 From: Sherry Sun Date: Thu, 23 Feb 2023 17:39:41 +0800 Subject: tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to skip waiting for transmission complete when UARTCTRL_SBK is asserted, otherwise the kernel may stuck here. And actually set_termios() adds transmission completion waiting to avoid data loss or data breakage when changing the baud rate, but we don't need to worry about this when queuing break characters. Signed-off-by: Sherry Sun Cc: stable Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/tty/serial/fsl_lpuart.c') diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index e945f41b93d4..f9e164abf920 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2240,9 +2240,15 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, /* update the per-port timeout */ uart_update_timeout(port, termios->c_cflag, baud); - /* wait transmit engin complete */ - lpuart32_write(&sport->port, 0, UARTMODIR); - lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); + /* + * LPUART Transmission Complete Flag may never be set while queuing a break + * character, so skip waiting for transmission complete when UARTCTRL_SBK is + * asserted. + */ + if (!(old_ctrl & UARTCTRL_SBK)) { + lpuart32_write(&sport->port, 0, UARTMODIR); + lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); + } /* disable transmit and receive */ lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), -- cgit v1.2.3