From 0faf70ca948a506b7fbd1a245b46b0eeae628702 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 31 May 2019 16:21:28 +0100 Subject: serial: sa1100: add note about modem control signals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As suggested by Uwe, add a note indicating that the modem control signals do not support interrupts, which precludes the driver from using mctrl_gpio_init(). Suggested-by: Uwe Kleine-König Signed-off-by: Russell King --- drivers/tty/serial/sa1100.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/tty/serial/sa1100.c') diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index 97bdfeccbea9..8e618129e65c 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -860,6 +860,10 @@ static int sa1100_serial_resume(struct platform_device *dev) static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev) { sport->port.dev = &dev->dev; + + // mctrl_gpio_init() requires that the GPIO driver supports interrupts, + // but we need to support GPIO drivers for hardware that has no such + // interrupts. Use mctrl_gpio_init_noauto() instead. sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0); if (IS_ERR(sport->gpios)) { int err = PTR_ERR(sport->gpios); -- cgit v1.2.3