From 222dcdff3405a31803aecd3bf66f62d46b8bda98 Mon Sep 17 00:00:00 2001 From: Krishna Yarlagadda Date: Wed, 4 Sep 2019 10:13:01 +0530 Subject: serial: tegra: check for FIFO mode enabled status Chips prior to Tegra186 needed delay of 3 UART clock cycles to avoid data loss. This issue is fixed in Tegra186 and a new flag is added to check if FIFO mode is enabled. chip data updated to check if this flag is available for a chip. Tegra186 has new compatible to enable this flag. Signed-off-by: Shardar Shariff Md Signed-off-by: Krishna Yarlagadda Link: https://lore.kernel.org/r/1567572187-29820-7-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 52 ++++++++++++++++++++++++++++++++++----- 1 file changed, 46 insertions(+), 6 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index c3f99131f86d..69af621ff7c0 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -72,6 +72,8 @@ #define TEGRA_TX_PIO 1 #define TEGRA_TX_DMA 2 +#define TEGRA_UART_FCR_IIR_FIFO_EN 0x40 + /** * tegra_uart_chip_data: SOC specific data. * @@ -84,6 +86,7 @@ struct tegra_uart_chip_data { bool tx_fifo_full_status; bool allow_txfifo_reset_fifo_mode; bool support_clk_src_div; + bool fifo_mode_enable_status; }; struct tegra_uart_port { @@ -263,6 +266,21 @@ static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup, tup->current_baud)); } +static int tegra_uart_wait_fifo_mode_enabled(struct tegra_uart_port *tup) +{ + unsigned long iir; + unsigned int tmout = 100; + + do { + iir = tegra_uart_read(tup, UART_IIR); + if (iir & TEGRA_UART_FCR_IIR_FIFO_EN) + return 0; + udelay(1); + } while (--tmout); + + return -ETIMEDOUT; +} + static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) { unsigned long fcr = tup->fcr_shadow; @@ -282,6 +300,8 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) tegra_uart_write(tup, fcr, UART_FCR); fcr |= UART_FCR_ENABLE_FIFO; tegra_uart_write(tup, fcr, UART_FCR); + if (tup->cdata->fifo_mode_enable_status) + tegra_uart_wait_fifo_mode_enabled(tup); } /* Dummy read to ensure the write is posted */ @@ -917,12 +937,20 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) /* Dummy read to ensure the write is posted */ tegra_uart_read(tup, UART_SCR); - /* - * For all tegra devices (up to t210), there is a hardware issue that - * requires software to wait for 3 UART clock periods after enabling - * the TX fifo, otherwise data could be lost. - */ - tegra_uart_wait_cycle_time(tup, 3); + if (tup->cdata->fifo_mode_enable_status) { + ret = tegra_uart_wait_fifo_mode_enabled(tup); + dev_err(tup->uport.dev, "FIFO mode not enabled\n"); + if (ret < 0) + return ret; + } else { + /* + * For all tegra devices (up to t210), there is a hardware + * issue that requires software to wait for 3 UART clock + * periods after enabling the TX fifo, otherwise data could + * be lost. + */ + tegra_uart_wait_cycle_time(tup, 3); + } /* * Initialize the UART with default configuration @@ -1293,12 +1321,21 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = { .tx_fifo_full_status = false, .allow_txfifo_reset_fifo_mode = true, .support_clk_src_div = false, + .fifo_mode_enable_status = false, }; static struct tegra_uart_chip_data tegra30_uart_chip_data = { .tx_fifo_full_status = true, .allow_txfifo_reset_fifo_mode = false, .support_clk_src_div = true, + .fifo_mode_enable_status = false, +}; + +static struct tegra_uart_chip_data tegra186_uart_chip_data = { + .tx_fifo_full_status = true, + .allow_txfifo_reset_fifo_mode = false, + .support_clk_src_div = true, + .fifo_mode_enable_status = true, }; static const struct of_device_id tegra_uart_of_match[] = { @@ -1308,6 +1345,9 @@ static const struct of_device_id tegra_uart_of_match[] = { }, { .compatible = "nvidia,tegra20-hsuart", .data = &tegra20_uart_chip_data, + }, { + .compatible = "nvidia,tegra186-hsuart", + .data = &tegra186_uart_chip_data, }, { }, }; -- cgit v1.2.3