From 686314cfbdac21c9019c0e04487b5d940db62406 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 30 May 2007 15:34:36 -0400 Subject: USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/generic.c | 45 ++++++++++++++------------------------- drivers/usb/core/hcd.c | 52 +++++++++++++++++++++++++++++----------------- drivers/usb/core/hcd.h | 14 ++----------- drivers/usb/core/hub.c | 42 +++++++------------------------------ 4 files changed, 59 insertions(+), 94 deletions(-) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index d363b0ea7345..4cbe7b339513 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -196,20 +196,15 @@ static int generic_suspend(struct usb_device *udev, pm_message_t msg) { int rc; - rc = usb_port_suspend(udev); - - /* Root hubs don't have upstream ports to suspend, - * so the line above won't do much for them. We have to - * shut down their downstream HC-to-USB interfaces manually, - * by doing a bus (or "global") suspend. + /* Normal USB devices suspend through their upstream port. + * Root hubs don't have upstream ports to suspend, + * so we have to shut down their downstream HC-to-USB + * interfaces manually by doing a bus (or "global") suspend. */ - if (rc == 0 && !udev->parent) { - rc = hcd_bus_suspend(udev->bus); - if (rc) { - dev_dbg(&udev->dev, "'global' suspend %d\n", rc); - usb_port_resume(udev); - } - } + if (!udev->parent) + rc = hcd_bus_suspend(udev); + else + rc = usb_port_suspend(udev); return rc; } @@ -217,25 +212,17 @@ static int generic_resume(struct usb_device *udev) { int rc; - if (udev->reset_resume) + /* Normal USB devices resume/reset through their upstream port. + * Root hubs don't have upstream ports to resume or reset, + * so we have to start up their downstream HC-to-USB + * interfaces manually by doing a bus (or "global") resume. + */ + if (!udev->parent) + rc = hcd_bus_resume(udev); + else if (udev->reset_resume) rc = usb_reset_suspended_device(udev); else rc = usb_port_resume(udev); - - /* Root hubs don't have upstream ports to resume or reset, - * so the line above won't do much for them. We have to - * start up their downstream HC-to-USB interfaces manually, - * by doing a bus (or "global") resume. - */ - if (rc == 0 && !udev->parent) { - rc = hcd_bus_resume(udev->bus); - if (rc) - dev_dbg(&udev->dev, "'global' resume %d\n", rc); - else { - /* TRSMRCY = 10 msec */ - msleep(10); - } - } return rc; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 87d6edf11f92..e5058fb26a7e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1257,40 +1257,54 @@ rescan: #ifdef CONFIG_PM -int hcd_bus_suspend (struct usb_bus *bus) +int hcd_bus_suspend(struct usb_device *rhdev) { - struct usb_hcd *hcd; - int status; + struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self); + int status; + int old_state = hcd->state; - hcd = container_of (bus, struct usb_hcd, self); - if (!hcd->driver->bus_suspend) - return -ENOENT; - hcd->state = HC_STATE_QUIESCING; - status = hcd->driver->bus_suspend (hcd); - if (status == 0) + dev_dbg(&rhdev->dev, "bus %s%s\n", + rhdev->auto_pm ? "auto-" : "", "suspend"); + if (!hcd->driver->bus_suspend) { + status = -ENOENT; + } else { + hcd->state = HC_STATE_QUIESCING; + status = hcd->driver->bus_suspend(hcd); + } + if (status == 0) { + usb_set_device_state(rhdev, USB_STATE_SUSPENDED); hcd->state = HC_STATE_SUSPENDED; - else - dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + } else { + hcd->state = old_state; + dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", "suspend", status); + } return status; } -int hcd_bus_resume (struct usb_bus *bus) +int hcd_bus_resume(struct usb_device *rhdev) { - struct usb_hcd *hcd; - int status; + struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self); + int status; - hcd = container_of (bus, struct usb_hcd, self); + dev_dbg(&rhdev->dev, "usb %s%s\n", + rhdev->auto_pm ? "auto-" : "", "resume"); if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) return 0; + hcd->state = HC_STATE_RESUMING; - status = hcd->driver->bus_resume (hcd); - if (status == 0) + status = hcd->driver->bus_resume(hcd); + if (status == 0) { + /* TRSMRCY = 10 msec */ + msleep(10); + usb_set_device_state(rhdev, rhdev->actconfig + ? USB_STATE_CONFIGURED + : USB_STATE_ADDRESS); hcd->state = HC_STATE_RUNNING; - else { - dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + } else { + dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", "resume", status); usb_hc_died(hcd); } diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index ef50fa494e47..b5ebb73c2332 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -364,23 +364,13 @@ extern int usb_find_interface_driver (struct usb_device *dev, #ifdef CONFIG_PM extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); extern void usb_root_hub_lost_power (struct usb_device *rhdev); -extern int hcd_bus_suspend (struct usb_bus *bus); -extern int hcd_bus_resume (struct usb_bus *bus); +extern int hcd_bus_suspend(struct usb_device *rhdev); +extern int hcd_bus_resume(struct usb_device *rhdev); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } - -static inline int hcd_bus_suspend(struct usb_bus *bus) -{ - return 0; -} - -static inline int hcd_bus_resume (struct usb_bus *bus) -{ - return 0; -} #endif /* CONFIG_PM */ /* diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 04d6fde57d88..ac1ef1527dd2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1722,17 +1722,8 @@ int usb_port_suspend(struct usb_device *udev) { int status = 0; - /* we change the device's upstream USB link, - * but root hubs have no upstream USB link. - */ - if (udev->parent) - status = hub_port_suspend(hdev_to_hub(udev->parent), - udev->portnum, udev); - else { - dev_dbg(&udev->dev, "usb %ssuspend\n", - udev->auto_pm ? "auto-" : ""); - usb_set_device_state(udev, USB_STATE_SUSPENDED); - } + status = hub_port_suspend(hdev_to_hub(udev->parent), + udev->portnum, udev); return status; } @@ -1775,8 +1766,7 @@ static int finish_port_resume(struct usb_device *udev) status); else if (udev->actconfig) { le16_to_cpus(&devstatus); - if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) - && udev->parent) { + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_CLEAR_FEATURE, @@ -1789,10 +1779,6 @@ static int finish_port_resume(struct usb_device *udev) "wakeup, status %d\n", status); } status = 0; - - } else if (udev->devnum <= 0) { - dev_dbg(&udev->dev, "bogus resume!\n"); - status = -EINVAL; } return status; } @@ -1821,9 +1807,8 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) port1, status); } else { /* drive resume for at least 20 msec */ - if (udev) - dev_dbg(&udev->dev, "usb %sresume\n", - udev->auto_pm ? "auto-" : ""); + dev_dbg(&udev->dev, "usb %sresume\n", + udev->auto_pm ? "auto-" : ""); msleep(25); #define LIVE_FLAGS ( USB_PORT_STAT_POWER \ @@ -1851,8 +1836,7 @@ SuspendCleared: USB_PORT_FEAT_C_SUSPEND); /* TRSMRCY = 10 msec */ msleep(10); - if (udev) - status = finish_port_resume(udev); + status = finish_port_resume(udev); } } if (status < 0) @@ -1882,18 +1866,8 @@ int usb_port_resume(struct usb_device *udev) { int status; - /* we change the device's upstream USB link, - * but root hubs have no upstream USB link. - */ - if (udev->parent) { - // NOTE this fails if parent is also suspended... - status = hub_port_resume(hdev_to_hub(udev->parent), - udev->portnum, udev); - } else { - dev_dbg(&udev->dev, "usb %sresume\n", - udev->auto_pm ? "auto-" : ""); - status = finish_port_resume(udev); - } + status = hub_port_resume(hdev_to_hub(udev->parent), + udev->portnum, udev); if (status < 0) dev_dbg(&udev->dev, "can't resume, status %d\n", status); return status; -- cgit v1.2.3