From afe28cd686aeb77e8d9140d50fb1cf06a7ecb731 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Fri, 22 Dec 2023 22:11:33 +0000 Subject: Revert "usb: dwc3: don't reset device side if dwc3 was configured as host-only" This reverts commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7. Don't omit soft-reset. During initialization, the driver may need to perform a soft reset to ensure the phy is ready when the controller updates the GCTL.PRTCAPDIR or other settings by issuing phy soft-reset. Many platforms often have access to DCTL register for soft-reset despite being host-only. If there are actual reported issues from the platforms that don't expose DCTL registers, then we will need to revisit (perhaps to teach dwc3 to perform xhci's soft-reset USBCMD.HCRST). Cc: Fixes: e835c0a4e23c ("usb: dwc3: don't reset device side if dwc3 was configured as host-only") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/7668ab11a48f260820825274976eb41fec7f54d1.1703282469.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb/dwc3') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 832c41fec4f7..f50b5575d588 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode or current role is host, then we can return early. + * host-only mode, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); -- cgit v1.2.3