From 70756027b0a01cb0bebf2e20d8d28e8103025734 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 16 Apr 2012 10:58:12 +0200 Subject: USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt Now that we are using irqdomains, we need to convert GPIO pins to Linux IRQ numbers using the gpio_to_irq() function. This call is added to request/free_irq calls. Signed-off-by: Nicolas Ferre Acked-by: Felipe Balbi Cc: linux-usb@vger.kernel.org --- drivers/usb/gadget/at91_udc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb/gadget/at91_udc.c') diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 0c935d7c65bd..9d7bcd910074 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1863,8 +1863,8 @@ static int __devinit at91udc_probe(struct platform_device *pdev) mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT); } else { - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, - 0, driver_name, udc)) { + if (request_irq(gpio_to_irq(udc->board.vbus_pin), + at91_vbus_irq, 0, driver_name, udc)) { DBG("request vbus irq %d failed\n", udc->board.vbus_pin); retval = -EBUSY; @@ -1886,7 +1886,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return 0; fail4: if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled) - free_irq(udc->board.vbus_pin, udc); + free_irq(gpio_to_irq(udc->board.vbus_pin), udc); fail3: if (gpio_is_valid(udc->board.vbus_pin)) gpio_free(udc->board.vbus_pin); @@ -1924,7 +1924,7 @@ static int __exit at91udc_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); if (gpio_is_valid(udc->board.vbus_pin)) { - free_irq(udc->board.vbus_pin, udc); + free_irq(gpio_to_irq(udc->board.vbus_pin), udc); gpio_free(udc->board.vbus_pin); } free_irq(udc->udp_irq, udc); -- cgit v1.2.3