From bb304b71f8dbcb284f0f876dfb4eecbadf079773 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 27 Apr 2015 15:27:36 +0300 Subject: Revert "usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap" This reverts commit 70843f623b58 ("usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap") and commit e507bf577e5a ("host: ehci-msm: remove duplicate check on resource"), because msm_otg and this driver are using same address space to access AHB mode and USB command registers. Signed-off-by: Ivan T. Ivanov Acked-by: Alan Stern Acked-by: Vivek Gautam Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-msm.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 9db74ca7e5b9..275c92e53a59 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -88,13 +88,20 @@ static int ehci_msm_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); + if (!res) { + dev_err(&pdev->dev, "Unable to get memory resource\n"); + ret = -ENODEV; goto put_hcd; } + hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto put_hcd; + } /* * OTG driver takes care of PHY initialization, clock management, -- cgit v1.2.3 From d104d0152a97fade389f47635b73a9ccc7295d0b Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 30 Apr 2015 17:16:02 +0300 Subject: xhci: fix isoc endpoint dequeue from advancing too far on transaction error Isoc TDs usually consist of one TRB, sometimes two. When all goes well we receive only one success event for a TD, and move the dequeue pointer to the next TD. This fails if the TD consists of two TRBs and we get a transfer error on the first TRB, we will then see two events for that TD. Fix this by making sure the event we get is for the last TRB in that TD before moving the dequeue pointer to the next TD. This will resolve some of the uvc and dvb issues with the "ERROR Transfer event TRB DMA ptr not part of current TD" error message Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f5397a517c54..ae0894c7ee11 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2026,8 +2026,13 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + frame->status = -EPROTO; + skip_td = true; + break; case COMP_TX_ERR: frame->status = -EPROTO; + if (event_trb != td->last_trb) + return 0; skip_td = true; break; case COMP_STOP: -- cgit v1.2.3 From 18cc2f4cbbaf825a4fedcf2d60fd388d291e0a38 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 30 Apr 2015 17:16:03 +0300 Subject: xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256 Our event ring consists of only one segment, and we risk filling the event ring in case we get isoc transfers with short intervals such as webcams that fill a TD every microframe (125us) With 64 TRB segment size one usb camera could fill the event ring in 8ms. A setup with several cameras and other devices can fill up the event ring as it is shared between all devices. This has occurred when uvcvideo queues 5 * 32TD URBs which then get cancelled when the video mode changes. The cancelled URBs are returned in the xhci interrupt context and blocks the interrupt handler from handling the new events. A full event ring will block xhci from scheduling traffic and affect all devices conneted to the xhci, will see errors such as Missed Service Intervals for isoc devices, and and Split transaction errors for LS/FS interrupt devices. Increasing the TRB_PER_SEGMENT will also increase the default endpoint ring size, which is welcome as for most isoc transfer we had to dynamically expand the endpoint ring anyway to be able to queue the 5 * 32TDs uvcvideo queues. The default size used to be 64 TRBs per segment Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8e421b89632d..ea75e8ccd3c1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1267,7 +1267,7 @@ union xhci_trb { * since the command ring is 64-byte aligned. * It must also be greater than 16. */ -#define TRBS_PER_SEGMENT 64 +#define TRBS_PER_SEGMENT 256 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) -- cgit v1.2.3 From 948fa13504f80b9765d2b753691ab94c83a10341 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Thu, 30 Apr 2015 17:16:04 +0300 Subject: xhci: gracefully handle xhci_irq dead device If the xHCI host controller has died (ie, device removed) or suffered other serious fatal error (STS_FATAL), then xhci_irq should handle this condition with IRQ_HANDLED instead of -ESHUTDOWN. Signed-off-by: Joe Lawrence Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ae0894c7ee11..7d34cbfaf373 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2645,7 +2645,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) xhci_halt(xhci); hw_died: spin_unlock(&xhci->lock); - return -ESHUTDOWN; + return IRQ_HANDLED; } /* -- cgit v1.2.3