From 463c824bb708b47a7a249bde07af4d701cacd54e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 2 Jun 2013 01:42:26 +0400 Subject: phy-rcar-usb: remove EHCI internal buffer setup Now that the EHCI internal buffer setup is done by the platform code, we can remove such code from this driver as it never really belonged here. We also no longer need the 2nd memory region now (2nd EHCI controller is simply missing in e.g. R8A7778 SoC). The patch has been tested on the Marzen and BOCK-W boards. Signed-off-by: Sergei Shtylyov Acked-by: Kuninori Morimoto Acked-by: Felipe Balbi Signed-off-by: Simon Horman --- drivers/usb/phy/phy-rcar-usb.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) (limited to 'drivers/usb/phy') diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c index a35681b0c501..4893dbde4ee1 100644 --- a/drivers/usb/phy/phy-rcar-usb.c +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -23,8 +23,6 @@ #define USBEH0 0x080C #define USBOH0 0x081C #define USBCTL0 0x0858 -#define EIIBC1 0x0094 -#define EIIBC2 0x009C /* USBPCTRL1 */ #define PHY_RST (1 << 2) @@ -40,7 +38,6 @@ struct rcar_usb_phy_priv { spinlock_t lock; void __iomem *reg0; - void __iomem *reg1; int counter; }; @@ -59,7 +56,6 @@ static int rcar_usb_phy_init(struct usb_phy *phy) struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); struct device *dev = phy->dev; void __iomem *reg0 = priv->reg0; - void __iomem *reg1 = priv->reg1; int i; u32 val; unsigned long flags; @@ -96,19 +92,6 @@ static int rcar_usb_phy_init(struct usb_phy *phy) /* set platform specific port settings */ iowrite32(0x00000000, (reg0 + USBPCTRL0)); - /* - * EHCI IP internal buffer setting - * EHCI IP internal buffer enable - * - * These are recommended value of a datasheet - * see [USB :: EHCI internal buffer setting] - */ - iowrite32(0x00ff0040, (reg0 + EIIBC1)); - iowrite32(0x00ff0040, (reg1 + EIIBC1)); - - iowrite32(0x00000001, (reg0 + EIIBC2)); - iowrite32(0x00000001, (reg1 + EIIBC2)); - /* * Bus alignment settings */ @@ -145,14 +128,13 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy) static int rcar_usb_phy_probe(struct platform_device *pdev) { struct rcar_usb_phy_priv *priv; - struct resource *res0, *res1; + struct resource *res0; struct device *dev = &pdev->dev; - void __iomem *reg0, *reg1; + void __iomem *reg0; int ret; res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res0 || !res1) { + if (!res0) { dev_err(dev, "Not enough platform resources\n"); return -EINVAL; } @@ -164,8 +146,7 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) * this driver can't use devm_request_and_ioremap(dev, res) here */ reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); - reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); - if (!reg0 || !reg1) { + if (!reg0) { dev_err(dev, "ioremap error\n"); return -ENOMEM; } @@ -177,7 +158,6 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) } priv->reg0 = reg0; - priv->reg1 = reg1; priv->counter = 0; priv->phy.dev = dev; priv->phy.label = dev_name(dev); -- cgit v1.2.3