From 441b62c1edb986827154768d89bbac0ba779984f Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 3 Mar 2008 16:08:34 -0800 Subject: USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 108 ++++++++++++++++++++++---------------------- 1 file changed, 54 insertions(+), 54 deletions(-) (limited to 'drivers/usb/serial/cp2101.c') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 2af8d21bb121..dc0ea08ed231 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -193,7 +193,7 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request, buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + dev_err(&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } @@ -214,7 +214,7 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request, if (result != size) { dev_err(&port->dev, "%s - Unable to send config request, " "request=0x%x size=%d result=%d\n", - __FUNCTION__, request, size, result); + __func__, request, size, result); return -EPROTO; } @@ -240,7 +240,7 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -265,7 +265,7 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, if ((size > 2 && result != size) || result < 0) { dev_err(&port->dev, "%s - Unable to send request, " "request=0x%x size=%d result=%d\n", - __FUNCTION__, request, size, result); + __func__, request, size, result); return -EPROTO; } @@ -293,11 +293,11 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) struct usb_serial *serial = port->serial; int result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", - __FUNCTION__); + __func__); return -EPROTO; } @@ -312,7 +312,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed resubmitting read urb, " - "error %d\n", __FUNCTION__, result); + "error %d\n", __func__, result); return result; } @@ -329,7 +329,7 @@ static void cp2101_cleanup (struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (serial->dev) { /* shutdown any bulk reads that might be going on */ @@ -342,10 +342,10 @@ static void cp2101_cleanup (struct usb_serial_port *port) static void cp2101_close (struct usb_serial_port *port, struct file * filp) { - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); + dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); @@ -367,10 +367,10 @@ static void cp2101_get_termios (struct usb_serial_port *port) int baud; int bits; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->tty || !port->tty->termios) { - dbg("%s - no tty structures", __FUNCTION__); + dbg("%s - no tty structures", __func__); return; } @@ -379,7 +379,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) if (baud) baud = BAUD_RATE_GEN_FREQ / baud; - dbg("%s - baud rate = %d", __FUNCTION__, baud); + dbg("%s - baud rate = %d", __func__, baud); tty_encode_baud_rate(port->tty, baud, baud); cflag = port->tty->termios->c_cflag; @@ -388,24 +388,24 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag &= ~CSIZE; switch(bits & BITS_DATA_MASK) { case BITS_DATA_5: - dbg("%s - data bits = 5", __FUNCTION__); + dbg("%s - data bits = 5", __func__); cflag |= CS5; break; case BITS_DATA_6: - dbg("%s - data bits = 6", __FUNCTION__); + dbg("%s - data bits = 6", __func__); cflag |= CS6; break; case BITS_DATA_7: - dbg("%s - data bits = 7", __FUNCTION__); + dbg("%s - data bits = 7", __func__); cflag |= CS7; break; case BITS_DATA_8: - dbg("%s - data bits = 8", __FUNCTION__); + dbg("%s - data bits = 8", __func__); cflag |= CS8; break; case BITS_DATA_9: dbg("%s - data bits = 9 (not supported, " - "using 8 data bits)", __FUNCTION__); + "using 8 data bits)", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; @@ -413,7 +413,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) break; default: dbg("%s - Unknown number of data bits, " - "using 8", __FUNCTION__); + "using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; @@ -423,35 +423,35 @@ static void cp2101_get_termios (struct usb_serial_port *port) switch(bits & BITS_PARITY_MASK) { case BITS_PARITY_NONE: - dbg("%s - parity = NONE", __FUNCTION__); + dbg("%s - parity = NONE", __func__); cflag &= ~PARENB; break; case BITS_PARITY_ODD: - dbg("%s - parity = ODD", __FUNCTION__); + dbg("%s - parity = ODD", __func__); cflag |= (PARENB|PARODD); break; case BITS_PARITY_EVEN: - dbg("%s - parity = EVEN", __FUNCTION__); + dbg("%s - parity = EVEN", __func__); cflag &= ~PARODD; cflag |= PARENB; break; case BITS_PARITY_MARK: dbg("%s - parity = MARK (not supported, " - "disabling parity)", __FUNCTION__); + "disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, " - "disabling parity)", __FUNCTION__); + "disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown parity mode, " - "disabling parity", __FUNCTION__); + "disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); @@ -461,21 +461,21 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag &= ~CSTOPB; switch(bits & BITS_STOP_MASK) { case BITS_STOP_1: - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); break; case BITS_STOP_1_5: dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit)", __FUNCTION__); + "using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_STOP_2: - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); cflag |= CSTOPB; break; default: dbg("%s - Unknown number of stop bits, " - "using 1 stop bit", __FUNCTION__); + "using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; cp2101_set_config(port, CP2101_BITS, &bits, 2); break; @@ -483,10 +483,10 @@ static void cp2101_get_termios (struct usb_serial_port *port) cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { - dbg("%s - flow control = CRTSCTS", __FUNCTION__); + dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; } else { - dbg("%s - flow control = NONE", __FUNCTION__); + dbg("%s - flow control = NONE", __func__); cflag &= ~CRTSCTS; } @@ -500,10 +500,10 @@ static void cp2101_set_termios (struct usb_serial_port *port, int baud=0, bits; unsigned int modem_ctl[4]; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (!port->tty || !port->tty->termios) { - dbg("%s - no tty structures", __FUNCTION__); + dbg("%s - no tty structures", __func__); return; } port->tty->termios->c_cflag &= ~CMSPAR; @@ -542,7 +542,7 @@ static void cp2101_set_termios (struct usb_serial_port *port, } if (baud) { - dbg("%s - Setting baud rate to %d baud", __FUNCTION__, + dbg("%s - Setting baud rate to %d baud", __func__, baud); if (cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ / baud))) { @@ -562,23 +562,23 @@ static void cp2101_set_termios (struct usb_serial_port *port, switch (cflag & CSIZE) { case CS5: bits |= BITS_DATA_5; - dbg("%s - data bits = 5", __FUNCTION__); + dbg("%s - data bits = 5", __func__); break; case CS6: bits |= BITS_DATA_6; - dbg("%s - data bits = 6", __FUNCTION__); + dbg("%s - data bits = 6", __func__); break; case CS7: bits |= BITS_DATA_7; - dbg("%s - data bits = 7", __FUNCTION__); + dbg("%s - data bits = 7", __func__); break; case CS8: bits |= BITS_DATA_8; - dbg("%s - data bits = 8", __FUNCTION__); + dbg("%s - data bits = 8", __func__); break; /*case CS9: bits |= BITS_DATA_9; - dbg("%s - data bits = 9", __FUNCTION__); + dbg("%s - data bits = 9", __func__); break;*/ default: dev_err(&port->dev, "cp2101 driver does not " @@ -598,10 +598,10 @@ static void cp2101_set_termios (struct usb_serial_port *port, if (cflag & PARENB) { if (cflag & PARODD) { bits |= BITS_PARITY_ODD; - dbg("%s - parity = ODD", __FUNCTION__); + dbg("%s - parity = ODD", __func__); } else { bits |= BITS_PARITY_EVEN; - dbg("%s - parity = EVEN", __FUNCTION__); + dbg("%s - parity = EVEN", __func__); } } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) @@ -614,10 +614,10 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; - dbg("%s - stop bits = 2", __FUNCTION__); + dbg("%s - stop bits = 2", __func__); } else { bits |= BITS_STOP_1; - dbg("%s - stop bits = 1", __FUNCTION__); + dbg("%s - stop bits = 1", __func__); } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of stop bits requested " @@ -627,23 +627,23 @@ static void cp2101_set_termios (struct usb_serial_port *port, if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __FUNCTION__, modem_ctl[0], modem_ctl[1], + __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); if (cflag & CRTSCTS) { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x09; modem_ctl[1] = 0x80; - dbg("%s - flow control = CRTSCTS", __FUNCTION__); + dbg("%s - flow control = CRTSCTS", __func__); } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; modem_ctl[1] |= 0x40; - dbg("%s - flow control = NONE", __FUNCTION__); + dbg("%s - flow control = NONE", __func__); } dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __FUNCTION__, modem_ctl[0], modem_ctl[1], + __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); } @@ -655,7 +655,7 @@ static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, { int control = 0; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (set & TIOCM_RTS) { control |= CONTROL_RTS; @@ -674,7 +674,7 @@ static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, control |= CONTROL_WRITE_DTR; } - dbg("%s - control = 0x%.4x", __FUNCTION__, control); + dbg("%s - control = 0x%.4x", __func__, control); return cp2101_set_config(port, CP2101_CONTROL, &control, 2); @@ -684,7 +684,7 @@ static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) { int control, result; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); cp2101_get_config(port, CP2101_CONTROL, &control, 1); @@ -695,7 +695,7 @@ static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) |((control & CONTROL_RING)? TIOCM_RI : 0) |((control & CONTROL_DCD) ? TIOCM_CD : 0); - dbg("%s - control = 0x%.2x", __FUNCTION__, control); + dbg("%s - control = 0x%.2x", __func__, control); return result; } @@ -704,12 +704,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) { int state; - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __func__, port->number); if (break_state == 0) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __FUNCTION__, + dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on"); cp2101_set_config(port, CP2101_BREAK, &state, 2); } @@ -725,7 +725,7 @@ static void cp2101_shutdown (struct usb_serial *serial) { int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { -- cgit v1.2.3