From 76fa9a240de4294a097235c9ddd470c21eb3449e Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Fri, 20 Jan 2006 14:06:09 -0800 Subject: [PATCH] USB: EHCI for AU1200 ALCHEMY: Add EHCI support for AU1200 Updated by removing the OHCI support Signed-off-by: Jordan Crouse Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 9 +- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/ehci-au1xxx.c | 297 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 11 +- 4 files changed, 314 insertions(+), 5 deletions(-) create mode 100644 drivers/usb/host/ehci-au1xxx.c (limited to 'drivers/usb') diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7772e28a303f..0e865975899f 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -10,8 +10,8 @@ menu "USB support" config USB_ARCH_HAS_HCD boolean default y if USB_ARCH_HAS_OHCI + default y if USB_ARCH_HAS_EHCI default y if ARM # SL-811 - default y if PPC_83xx default PCI # many non-PCI SOC chips embed OHCI @@ -31,6 +31,13 @@ config USB_ARCH_HAS_OHCI # more: default PCI +# some non-PCI hcds implement EHCI +config USB_ARCH_HAS_EHCI + boolean + default y if PPC_83xx + default y if SOC_AU1200 + default PCI + # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. config USB tristate "Support for Host-side USB" diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a45293673906..e27b79a3c05f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -6,7 +6,7 @@ comment "USB Host Controller Drivers" config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB && (PCI || PPC_83xx) + depends on USB && USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c new file mode 100644 index 000000000000..63eadeec1324 --- /dev/null +++ b/drivers/usb/host/ehci-au1xxx.c @@ -0,0 +1,297 @@ +/* + * EHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 2000-2004 David Brownell + * + * Bus Glue for AMD Alchemy Au1xxx + * + * Based on "ohci-au1xxx.c" by Matt Porter + * + * Modified for AMD Alchemy Au1200 EHC + * by K.Boge + * + * This file is licenced under the GPL. + */ + +#include +#include + +#ifndef CONFIG_SOC_AU1200 +#error "this Alchemy chip doesn't have EHCI" +#else /* Au1200 */ + +#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG) +#define USB_MCFG_PFEN (1<<31) +#define USB_MCFG_RDCOMB (1<<30) +#define USB_MCFG_SSDEN (1<<23) +#define USB_MCFG_PHYPLLEN (1<<19) +#define USB_MCFG_EHCCLKEN (1<<17) +#define USB_MCFG_UCAM (1<<7) +#define USB_MCFG_EBMEN (1<<3) +#define USB_MCFG_EMEMEN (1<<2) + +#define USBH_ENABLE_CE (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN) + +#ifdef CONFIG_DMA_COHERENT +#define USBH_ENABLE_INIT (USBH_ENABLE_CE \ + | USB_MCFG_PFEN | USB_MCFG_RDCOMB \ + | USB_MCFG_SSDEN | USB_MCFG_UCAM \ + | USB_MCFG_EBMEN | USB_MCFG_EMEMEN) +#else +#define USBH_ENABLE_INIT (USBH_ENABLE_CE \ + | USB_MCFG_PFEN | USB_MCFG_RDCOMB \ + | USB_MCFG_SSDEN \ + | USB_MCFG_EBMEN | USB_MCFG_EMEMEN) +#endif +#define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN) + +#endif /* Au1200 */ + +extern int usb_disabled(void); + +/*-------------------------------------------------------------------------*/ + +static void au1xxx_start_ehc(struct platform_device *dev) +{ + pr_debug(__FILE__ ": starting Au1xxx EHCI USB Controller\n"); + + /* write HW defaults again in case Yamon cleared them */ + if (au_readl(USB_HOST_CONFIG) == 0) { + au_writel(0x00d02000, USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); + udelay(1000); + } + /* enable host controller */ + au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); + udelay(1000); + au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG), + USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); + udelay(1000); + + pr_debug(__FILE__ ": Clock to USB host has been enabled\n"); +} + +static void au1xxx_stop_ehc(struct platform_device *dev) +{ + pr_debug(__FILE__ ": stopping Au1xxx EHCI USB Controller\n"); + + /* Disable mem */ + au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG); + udelay(1000); + /* Disable clock */ + au_writel(~USB_MCFG_EHCCLKEN & au_readl(USB_HOST_CONFIG), + USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); +} + +/*-------------------------------------------------------------------------*/ + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + +/** + * usb_ehci_au1xxx_probe - initialize Au1xxx-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_ehci_au1xxx_probe(const struct hc_driver *driver, + struct usb_hcd **hcd_out, struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + +#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT) + + /* Au1200 AB USB does not support coherent memory */ + if (!(read_c0_prid() & 0xff)) { + pr_info("%s: this is chip revision AB!\n", dev->dev.name); + pr_info("%s: update your board or re-configure the kernel\n", + dev->dev.name); + return -ENODEV; + } +#endif + + au1xxx_start_ehc(dev); + + if (dev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug("resource[1] is not IORESOURCE_IRQ"); + retval = -ENOMEM; + } + hcd = usb_create_hcd(driver, &dev->dev, "Au1xxx"); + if (!hcd) + return -ENOMEM; + hcd->rsrc_start = dev->resource[0].start; + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_debug("request_mem_region failed"); + retval = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase)); + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + /* ehci_hcd_init(hcd_to_ehci(hcd)); */ + + retval = + usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ); + if (retval == 0) + return retval; + + au1xxx_stop_ehc(dev); + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + return retval; +} + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * usb_ehci_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_ehci_hcd_au1xxx_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + */ +void usb_ehci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + au1xxx_stop_ehc(dev); +} + +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ehci_au1xxx_hc_driver = { + .description = hcd_name, + .product_desc = "Au1xxx EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_init, + .start = ehci_run, + .stop = ehci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#ifdef CONFIG_PM + .hub_suspend = ehci_hub_suspend, + .hub_resume = ehci_hub_resume, +#endif +}; + +/*-------------------------------------------------------------------------*/ + +static int ehci_hcd_au1xxx_drv_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct usb_hcd *hcd = NULL; + int ret; + + pr_debug("In ehci_hcd_au1xxx_drv_probe\n"); + + if (usb_disabled()) + return -ENODEV; + + ret = usb_ehci_au1xxx_probe(&ehci_au1xxx_hc_driver, &hcd, pdev); + return ret; +} + +static int ehci_hcd_au1xxx_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_ehci_au1xxx_remove(hcd, pdev); + return 0; +} + + /*TBD*/ +/*static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + + return 0; +} +static int ehci_hcd_au1xxx_drv_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + + return 0; +} +*/ +static struct device_driver ehci_hcd_au1xxx_driver = { + .name = "au1xxx-ehci", + .bus = &platform_bus_type, + .probe = ehci_hcd_au1xxx_drv_probe, + .remove = ehci_hcd_au1xxx_drv_remove, + /*.suspend = ehci_hcd_au1xxx_drv_suspend, */ + /*.resume = ehci_hcd_au1xxx_drv_resume, */ +}; + +static int __init ehci_hcd_au1xxx_init(void) +{ + pr_debug(DRIVER_INFO " (Au1xxx)\n"); + + return driver_register(&ehci_hcd_au1xxx_driver); +} + +static void __exit ehci_hcd_au1xxx_cleanup(void) +{ + driver_unregister(&ehci_hcd_au1xxx_driver); +} + +module_init(ehci_hcd_au1xxx_init); +module_exit(ehci_hcd_au1xxx_cleanup); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 8730babb5771..79f2d8b9bfb6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -889,14 +889,19 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_PCI #include "ehci-pci.c" +#define EHCI_BUS_GLUED #endif #ifdef CONFIG_PPC_83xx #include "ehci-fsl.c" +#define EHCI_BUS_GLUED #endif -#if !(defined(CONFIG_PCI) || \ - defined(CONFIG_PPC_83xx) \ - ) +#ifdef CONFIG_SOC_AU1X00 +#include "ehci-au1xxx.c" +#define EHCI_BUS_GLUED +#endif + +#ifndef EHCI_BUS_GLUED #error "missing bus glue for ehci-hcd" #endif -- cgit v1.2.3