From 36cae568404a298a19a6e8a3f18641075d4cab04 Mon Sep 17 00:00:00 2001 From: Kristian Evensen Date: Thu, 13 Sep 2018 11:21:49 +0200 Subject: USB: serial: option: improve Quectel EP06 detection The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB configuration, without the VID/PID or configuration number changing. When the configuration is updated and interfaces are added/removed, the interface numbers are updated. This causes our current code for matching EP06 not to work as intended, as the assumption about reserved interfaces no longer holds. If for example the diagnostic (first) interface is removed, option will (try to) bind to the QMI interface. This patch improves EP06 detection by replacing the current match with two matches, and those matches check class, subclass and protocol as well as VID and PID. The diag interface exports class, subclass and protocol as 0xff. For the other serial interfaces, class is 0xff and subclass and protocol are both 0x0. The modem can export the following devices and always in this order: diag, nmea, at, ppp. qmi and adb. This means that diag can only ever be interface 0, and interface numbers 1-5 should be marked as reserved. The three other serial devices can have interface numbers 0-3, but I have not marked any interfaces as reserved. The reason is that the serial devices are the only interfaces exported by the device where subclass and protocol is 0x0. QMI exports the same class, subclass and protocol values as the diag interface. However, the two interfaces have different number of endpoints, QMI has three and diag two. I have added a check for number of interfaces if VID/PID matches the EP06, and we ignore the device if number of interfaces equals three (and subclass is set). Signed-off-by: Kristian Evensen Acked-by: Dan Williams [ johan: drop uneeded RSVD(5) for ADB ] Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0215b70c4efc..382feafbd127 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1081,8 +1081,9 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06), - .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), @@ -1985,6 +1986,7 @@ static int option_probe(struct usb_serial *serial, { struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; + struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; unsigned long device_flags = id->driver_info; /* Never bind to the CD-Rom emulation interface */ @@ -1999,6 +2001,18 @@ static int option_probe(struct usb_serial *serial, if (device_flags & RSVD(iface_desc->bInterfaceNumber)) return -ENODEV; + /* + * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class, + * subclass and protocol is 0xff for both the diagnostic port and the + * QMI interface, but the diagnostic port only has two endpoints (QMI + * has three). + */ + if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) && + dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) && + iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) { + return -ENODEV; + } + /* Store the device flags so we can use them during attach. */ usb_set_serial_data(serial, (void *)device_flags); -- cgit v1.2.3 From 35aecc02b5b621782111f64cbb032c7f6a90bb32 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 13 Sep 2018 11:21:50 +0200 Subject: USB: serial: option: add two-endpoints device-id flag Allow matching on interfaces having two endpoints by adding a new device-id flag. This allows for the handling of devices whose interface numbers can change (e.g. Quectel EP06) to be contained in the device-id table. Tested-by: Kristian Evensen Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 382feafbd127..e72ad9f81c73 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -561,6 +561,9 @@ static void option_instat_callback(struct urb *urb); /* Interface is reserved */ #define RSVD(ifnum) ((BIT(ifnum) & 0xff) << 0) +/* Interface must have two endpoints */ +#define NUMEP2 BIT(16) + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -1082,7 +1085,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), - .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) }, + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, @@ -1986,7 +1989,6 @@ static int option_probe(struct usb_serial *serial, { struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; - struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; unsigned long device_flags = id->driver_info; /* Never bind to the CD-Rom emulation interface */ @@ -2002,16 +2004,11 @@ static int option_probe(struct usb_serial *serial, return -ENODEV; /* - * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class, - * subclass and protocol is 0xff for both the diagnostic port and the - * QMI interface, but the diagnostic port only has two endpoints (QMI - * has three). + * Allow matching on bNumEndpoints for devices whose interface numbers + * can change (e.g. Quectel EP06). */ - if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) && - dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) && - iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) { + if (device_flags & NUMEP2 && iface_desc->bNumEndpoints != 2) return -ENODEV; - } /* Store the device flags so we can use them during attach. */ usb_set_serial_data(serial, (void *)device_flags); -- cgit v1.2.3 From f5fad711c06e652f90f581fc7c2caee327c33d31 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 24 Sep 2018 15:28:10 +0200 Subject: USB: serial: simple: add Motorola Tetra MTP6550 id Add device-id for the Motorola Tetra radio MTP6550. Bus 001 Device 004: ID 0cad:9012 Motorola CGISS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9012 bcdDevice 24.16 iManufacturer 1 Motorola Solutions, Inc. iProduct 2 TETRA PEI interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 Generic Serial config bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Reported-by: Hans Hult Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 40864c2bd9dc..4d0273508043 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -84,7 +84,8 @@ DEVICE(moto_modem, MOTO_IDS); /* Motorola Tetra driver */ #define MOTOROLA_TETRA_IDS() \ - { USB_DEVICE(0x0cad, 0x9011) } /* Motorola Solutions TETRA PEI */ + { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \ + { USB_DEVICE(0x0cad, 0x9012) } /* MTP6550 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS); /* Novatel Wireless GPS driver */ -- cgit v1.2.3 From f2924d4b16ae138c2de6a0e73f526fb638330858 Mon Sep 17 00:00:00 2001 From: Romain Izard Date: Thu, 20 Sep 2018 16:49:04 +0200 Subject: usb: cdc_acm: Do not leak URB buffers When the ACM TTY port is disconnected, the URBs it uses must be killed, and then the buffers must be freed. Unfortunately a previous refactor removed the code freeing the buffers because it looked extremely similar to the code killing the URBs. As a result, there were many new leaks for each plug/unplug cycle of a CDC-ACM device, that were detected by kmemleak. Restore the missing code, and the memory leak is removed. Fixes: ba8c931ded8d ("cdc-acm: refactor killing urbs") Signed-off-by: Romain Izard Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f9b40a9dc4d3..bc03b0a690b4 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1514,6 +1514,7 @@ static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); struct tty_struct *tty; + int i; /* sibling interface is already cleaning up */ if (!acm) @@ -1544,6 +1545,11 @@ static void acm_disconnect(struct usb_interface *intf) tty_unregister_device(acm_tty_driver, acm->minor); + usb_free_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_free_urb(acm->wb[i].urb); + for (i = 0; i < acm->rx_buflimit; i++) + usb_free_urb(acm->read_urbs[i]); acm_write_buffers_free(acm); usb_free_coherent(acm->dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); acm_read_buffers_free(acm); -- cgit v1.2.3 From ffe84e01bb1b38c7eb9c6b6da127a6c136d251df Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 1 Oct 2018 18:36:07 +0300 Subject: xhci: Add missing CAS workaround for Intel Sunrise Point xHCI The workaround for missing CAS bit is also needed for xHC on Intel sunrisepoint PCH. For more details see: Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 6372edf339d9..722860eb5a91 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -185,6 +185,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) xhci->quirks |= XHCI_MISSING_CAS; -- cgit v1.2.3 From 555df5820e733cded7eb8d0bf78b2a791be51d75 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 1 Oct 2018 18:36:08 +0300 Subject: usb: xhci-mtk: resume USB3 roothub first Give USB3 devices a better chance to enumerate at USB3 speeds if they are connected to a suspended host. Porting from "671ffdff5b13 xhci: resume USB 3 roothub first" Cc: Signed-off-by: Chunfeng Yun Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 7334da9e9779..71d0d33c3286 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -642,10 +642,10 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev) xhci_mtk_host_enable(mtk); xhci_dbg(xhci, "%s: restart port polling\n", __func__); - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - usb_hcd_poll_rh_status(hcd); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); usb_hcd_poll_rh_status(xhci->shared_hcd); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); return 0; } -- cgit v1.2.3