From a0678e2eed41e81004308693ac84ea95614b0920 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Thu, 29 Nov 2018 10:34:34 +0800 Subject: usb: mtu3: fix the issue about SetFeature(U1/U2_Enable) Fix the issue: device doesn't accept LGO_U1/U2: 1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2 by default; 2. enable/disable controller to initiate requests for transition into U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE; Signed-off-by: Chunfeng Yun Signed-off-by: Felipe Balbi --- drivers/usb/mtu3/mtu3_core.c | 4 +++- drivers/usb/mtu3/mtu3_gadget_ep0.c | 8 ++++---- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index 981e4e8c5c13..1ffc0bc31c1d 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -578,8 +578,10 @@ static void mtu3_regs_init(struct mtu3 *mtu) if (mtu->is_u3_ip) { /* disable LGO_U1/U2 by default */ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, - SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE | SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); + /* enable accept LGO_U1/U2 link command from host */ + mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL, + SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE); /* device responses to u3_exit from host automatically */ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); /* automatically build U2 link when U3 detect fail */ diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index 25216e79cd6e..3c464d8ae023 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -336,9 +336,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U1_ACCEPT_ENABLE; + lpc |= SW_U1_REQUEST_ENABLE; else - lpc &= ~SW_U1_ACCEPT_ENABLE; + lpc &= ~SW_U1_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u1_enable = !!set; @@ -351,9 +351,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U2_ACCEPT_ENABLE; + lpc |= SW_U2_REQUEST_ENABLE; else - lpc &= ~SW_U2_ACCEPT_ENABLE; + lpc &= ~SW_U2_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u2_enable = !!set; -- cgit v1.2.3