From 8d5fc280392735e4441b35de14f2f4860fa8d83c Mon Sep 17 00:00:00 2001 From: Yan Xinyu Date: Thu, 14 Jul 2022 18:20:37 +0800 Subject: USB: serial: option: add support for OPPO R11 diag port Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index de59fa919540..cf65cb84c3ca 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -573,6 +573,10 @@ static void option_instat_callback(struct urb *urb); #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803 +/* OPPO products */ +#define OPPO_VENDOR_ID 0x22d9 +#define OPPO_PRODUCT_R11 0x276c + /* Device flags */ @@ -2155,6 +2159,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 Mon Sep 17 00:00:00 2001 From: Yonglin Tan Date: Tue, 19 Jul 2022 19:28:00 +0800 Subject: USB: serial: option: add Quectel EM060K modem Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cf65cb84c3ca..bd6d624aa375 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -253,6 +253,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a +#define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 @@ -1142,6 +1143,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, -- cgit v1.2.3 From 001047ea241a9646010b2744451dfbc7289542f3 Mon Sep 17 00:00:00 2001 From: Niek Nooijens Date: Mon, 1 Aug 2022 10:39:25 +0200 Subject: USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d5a3986dfee7..52d59be92034 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1045,6 +1045,8 @@ static const struct usb_device_id id_table_combined[] = { /* IDS GmbH devices */ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) }, { USB_DEVICE(IDS_VID, IDS_CM31A_PID) }, + /* Omron devices */ + { USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) }, /* U-Blox devices */ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4e92c165c86b..31c8ccabbbb7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -661,6 +661,12 @@ #define INFINEON_TRIBOARD_TC1798_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ #define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */ +/* + * Omron corporation (https://www.omron.com) + */ + #define OMRON_VID 0x0590 + #define OMRON_CS1W_CIF31_PID 0x00b2 + /* * Acton Research Corp. */ -- cgit v1.2.3 From 8ffe20d08f2c95d702c453020d03a4c568a988f0 Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Wed, 10 Aug 2022 11:30:50 +0800 Subject: USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd6d624aa375..a5e8374a8d71 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -439,6 +439,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_MV31_2_RMNET 0x00b9 #define CINTERION_PRODUCT_MV32_WA 0x00f1 #define CINTERION_PRODUCT_MV32_WB 0x00f2 +#define CINTERION_PRODUCT_MV32_WA_RMNET 0x00f3 +#define CINTERION_PRODUCT_MV32_WB_RMNET 0x00f4 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -2001,8 +2003,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0)}, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), -- cgit v1.2.3 From ceb4038472a4803e7046ed488b03d11551991514 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 29 Aug 2022 16:25:50 +0200 Subject: USB: serial: cp210x: add Decagon UCA device id Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c374620a486f..a34957c4b64c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -130,6 +130,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ -- cgit v1.2.3 From 8e83622ae7ca481c76c8fd9579877f6abae64ca2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 31 Aug 2022 10:15:24 +0200 Subject: USB: serial: ch341: fix lost character on LCR updates Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe Tested-by: Jonathan Woithe Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2798fca71261..2bcce172355b 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -97,7 +97,10 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + unsigned long quirks; + u8 version; + unsigned long break_end; }; @@ -265,6 +268,9 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, * (stop bits, parity and word length). Version 0x30 and above use * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. */ + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr); if (r) @@ -308,7 +314,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r) return r; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version); r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0) -- cgit v1.2.3 From 41ca302a697b64a3dab4676e01d0d11bb184737d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 31 Aug 2022 10:15:25 +0200 Subject: USB: serial: ch341: fix disabled rx timer on older devices At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe Tested-by: Jonathan Woithe Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2bcce172355b..af01a462cc43 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -253,8 +253,12 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, /* * CH341A buffers data until a full endpoint-size packet (32 bytes) * has been received unless bit 7 is set. + * + * At least one device with version 0x27 appears to have this bit + * inverted. */ - val |= BIT(7); + if (priv->version > 0x27) + val |= BIT(7); r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER, -- cgit v1.2.3