From d510c88cfbb294d2b1e2d0b71576e9b79d0e2e83 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 14 Apr 2021 01:05:08 +0800 Subject: efifb: Check efifb_pci_dev before using it On some platforms like Hyper-V and RPi4 with UEFI firmware, efifb is not a PCI device. So make sure efifb_pci_dev is found before using it. Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0") BugLink: https://bugs.launchpad.net/bugs/1922403 Signed-off-by: Kai-Heng Feng Signed-off-by: Alex Deucher Reviewed-by: Alex Deucher Link: https://patchwork.freedesktop.org/patch/msgid/20210413170508.968148-1-kai.heng.feng@canonical.com --- drivers/video/fbdev/efifb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c index f58a545b3bf3..8ea8f079cde2 100644 --- a/drivers/video/fbdev/efifb.c +++ b/drivers/video/fbdev/efifb.c @@ -575,7 +575,8 @@ static int efifb_probe(struct platform_device *dev) goto err_fb_dealoc; } fb_info(info, "%s frame buffer device\n", info->fix.id); - pm_runtime_get_sync(&efifb_pci_dev->dev); + if (efifb_pci_dev) + pm_runtime_get_sync(&efifb_pci_dev->dev); return 0; err_fb_dealoc: @@ -602,7 +603,8 @@ static int efifb_remove(struct platform_device *pdev) unregister_framebuffer(info); sysfs_remove_groups(&pdev->dev.kobj, efifb_groups); framebuffer_release(info); - pm_runtime_put(&efifb_pci_dev->dev); + if (efifb_pci_dev) + pm_runtime_put(&efifb_pci_dev->dev); return 0; } -- cgit v1.2.3 From 11e8f5fd223bd4d33fa10527bad3fe48469a15df Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Fri, 30 Apr 2021 12:58:35 +0200 Subject: drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann Reviewed-by: Daniel Vetter # fbdev support Acked-by: Maxime Ripard Tested-by: nerdopolis Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de --- MAINTAINERS | 7 + drivers/gpu/drm/tiny/Kconfig | 16 + drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/simpledrm.c | 873 +++++++++++++++++++++++++++++++++++++++ drivers/video/fbdev/Kconfig | 2 +- 5 files changed, 898 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/tiny/simpledrm.c (limited to 'drivers/video') diff --git a/MAINTAINERS b/MAINTAINERS index 493dde0e02d2..4d10ad658604 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5765,6 +5765,13 @@ S: Orphan / Obsolete F: drivers/gpu/drm/savage/ F: include/uapi/drm/savage_drm.h +DRM DRIVER FOR SIMPLE FRAMEBUFFERS +M: Thomas Zimmermann +L: dri-devel@lists.freedesktop.org +S: Maintained +T: git git://anongit.freedesktop.org/drm/drm-misc +F: drivers/gpu/drm/tiny/simplekms.c + DRM DRIVER FOR SIS VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/sis/ diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig index 9bbaa1a69050..d46f95d9196d 100644 --- a/drivers/gpu/drm/tiny/Kconfig +++ b/drivers/gpu/drm/tiny/Kconfig @@ -38,6 +38,22 @@ config DRM_GM12U320 This is a KMS driver for projectors which use the GM12U320 chipset for video transfer over USB2/3, such as the Acer C120 mini projector. +config DRM_SIMPLEDRM + tristate "Simple framebuffer driver" + depends on DRM + select DRM_GEM_SHMEM_HELPER + select DRM_KMS_HELPER + help + DRM driver for simple platform-provided framebuffers. + + This driver assumes that the display hardware has been initialized + by the firmware or bootloader before the kernel boots. Scanout + buffer, size, and display format must be provided via device tree, + UEFI, VESA, etc. + + On x86 and compatible, you should also select CONFIG_X86_SYSFB to + use UEFI and VESA framebuffers. + config TINYDRM_HX8357D tristate "DRM support for HX8357D display panels" depends on DRM && SPI diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile index bef6780bdd6f..9cc847e756da 100644 --- a/drivers/gpu/drm/tiny/Makefile +++ b/drivers/gpu/drm/tiny/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o obj-$(CONFIG_DRM_GM12U320) += gm12u320.o +obj-$(CONFIG_DRM_SIMPLEDRM) += simpledrm.o obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c new file mode 100644 index 000000000000..9d522473cd7c --- /dev/null +++ b/drivers/gpu/drm/tiny/simpledrm.c @@ -0,0 +1,873 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "simpledrm" +#define DRIVER_DESC "DRM driver for simple-framebuffer platform devices" +#define DRIVER_DATE "20200625" +#define DRIVER_MAJOR 1 +#define DRIVER_MINOR 0 + +/* + * Assume a monitor resolution of 96 dpi to + * get a somewhat reasonable screen size. + */ +#define RES_MM(d) \ + (((d) * 254ul) / (96ul * 10ul)) + +#define SIMPLEDRM_MODE(hd, vd) \ + DRM_SIMPLE_MODE(hd, vd, RES_MM(hd), RES_MM(vd)) + +/* + * Helpers for simplefb + */ + +static int +simplefb_get_validated_int(struct drm_device *dev, const char *name, + uint32_t value) +{ + if (value > INT_MAX) { + drm_err(dev, "simplefb: invalid framebuffer %s of %u\n", + name, value); + return -EINVAL; + } + return (int)value; +} + +static int +simplefb_get_validated_int0(struct drm_device *dev, const char *name, + uint32_t value) +{ + if (!value) { + drm_err(dev, "simplefb: invalid framebuffer %s of %u\n", + name, value); + return -EINVAL; + } + return simplefb_get_validated_int(dev, name, value); +} + +static const struct drm_format_info * +simplefb_get_validated_format(struct drm_device *dev, const char *format_name) +{ + static const struct simplefb_format formats[] = SIMPLEFB_FORMATS; + const struct simplefb_format *fmt = formats; + const struct simplefb_format *end = fmt + ARRAY_SIZE(formats); + + if (!format_name) { + drm_err(dev, "simplefb: missing framebuffer format\n"); + return ERR_PTR(-EINVAL); + } + + while (fmt < end) { + if (!strcmp(format_name, fmt->name)) + return drm_format_info(fmt->fourcc); + ++fmt; + } + + drm_err(dev, "simplefb: unknown framebuffer format %s\n", + format_name); + + return ERR_PTR(-EINVAL); +} + +static int +simplefb_get_width_pd(struct drm_device *dev, + const struct simplefb_platform_data *pd) +{ + return simplefb_get_validated_int0(dev, "width", pd->width); +} + +static int +simplefb_get_height_pd(struct drm_device *dev, + const struct simplefb_platform_data *pd) +{ + return simplefb_get_validated_int0(dev, "height", pd->height); +} + +static int +simplefb_get_stride_pd(struct drm_device *dev, + const struct simplefb_platform_data *pd) +{ + return simplefb_get_validated_int(dev, "stride", pd->stride); +} + +static const struct drm_format_info * +simplefb_get_format_pd(struct drm_device *dev, + const struct simplefb_platform_data *pd) +{ + return simplefb_get_validated_format(dev, pd->format); +} + +static int +simplefb_read_u32_of(struct drm_device *dev, struct device_node *of_node, + const char *name, u32 *value) +{ + int ret = of_property_read_u32(of_node, name, value); + + if (ret) + drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n", + name, ret); + return ret; +} + +static int +simplefb_read_string_of(struct drm_device *dev, struct device_node *of_node, + const char *name, const char **value) +{ + int ret = of_property_read_string(of_node, name, value); + + if (ret) + drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n", + name, ret); + return ret; +} + +static int +simplefb_get_width_of(struct drm_device *dev, struct device_node *of_node) +{ + u32 width; + int ret = simplefb_read_u32_of(dev, of_node, "width", &width); + + if (ret) + return ret; + return simplefb_get_validated_int0(dev, "width", width); +} + +static int +simplefb_get_height_of(struct drm_device *dev, struct device_node *of_node) +{ + u32 height; + int ret = simplefb_read_u32_of(dev, of_node, "height", &height); + + if (ret) + return ret; + return simplefb_get_validated_int0(dev, "height", height); +} + +static int +simplefb_get_stride_of(struct drm_device *dev, struct device_node *of_node) +{ + u32 stride; + int ret = simplefb_read_u32_of(dev, of_node, "stride", &stride); + + if (ret) + return ret; + return simplefb_get_validated_int(dev, "stride", stride); +} + +static const struct drm_format_info * +simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node) +{ + const char *format; + int ret = simplefb_read_string_of(dev, of_node, "format", &format); + + if (ret) + return ERR_PTR(ret); + return simplefb_get_validated_format(dev, format); +} + +/* + * Simple Framebuffer device + */ + +struct simpledrm_device { + struct drm_device dev; + struct platform_device *pdev; + + /* clocks */ +#if defined CONFIG_OF && defined CONFIG_COMMON_CLK + unsigned int clk_count; + struct clk **clks; +#endif + /* regulators */ +#if defined CONFIG_OF && defined CONFIG_REGULATOR + unsigned int regulator_count; + struct regulator **regulators; +#endif + + /* simplefb settings */ + struct drm_display_mode mode; + const struct drm_format_info *format; + unsigned int pitch; + + /* memory management */ + struct resource *mem; + void __iomem *screen_base; + + /* modesetting */ + uint32_t formats[8]; + size_t nformats; + struct drm_connector connector; + struct drm_simple_display_pipe pipe; +}; + +static struct simpledrm_device *simpledrm_device_of_dev(struct drm_device *dev) +{ + return container_of(dev, struct simpledrm_device, dev); +} + +/* + * Hardware + */ + +#if defined CONFIG_OF && defined CONFIG_COMMON_CLK +/* + * Clock handling code. + * + * Here we handle the clocks property of our "simple-framebuffer" dt node. + * This is necessary so that we can make sure that any clocks needed by + * the display engine that the bootloader set up for us (and for which it + * provided a simplefb dt node), stay up, for the life of the simplefb + * driver. + * + * When the driver unloads, we cleanly disable, and then release the clocks. + * + * We only complain about errors here, no action is taken as the most likely + * error can only happen due to a mismatch between the bootloader which set + * up simplefb, and the clock definitions in the device tree. Chances are + * that there are no adverse effects, and if there are, a clean teardown of + * the fb probe will not help us much either. So just complain and carry on, + * and hope that the user actually gets a working fb at the end of things. + */ + +static void simpledrm_device_release_clocks(void *res) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(res); + unsigned int i; + + for (i = 0; i < sdev->clk_count; ++i) { + if (sdev->clks[i]) { + clk_disable_unprepare(sdev->clks[i]); + clk_put(sdev->clks[i]); + } + } +} + +static int simpledrm_device_init_clocks(struct simpledrm_device *sdev) +{ + struct drm_device *dev = &sdev->dev; + struct platform_device *pdev = sdev->pdev; + struct device_node *of_node = pdev->dev.of_node; + struct clk *clock; + unsigned int i; + int ret; + + if (dev_get_platdata(&pdev->dev) || !of_node) + return 0; + + sdev->clk_count = of_clk_get_parent_count(of_node); + if (!sdev->clk_count) + return 0; + + sdev->clks = drmm_kzalloc(dev, sdev->clk_count * sizeof(sdev->clks[0]), + GFP_KERNEL); + if (!sdev->clks) + return -ENOMEM; + + for (i = 0; i < sdev->clk_count; ++i) { + clock = of_clk_get(of_node, i); + if (IS_ERR(clock)) { + ret = PTR_ERR(clock); + if (ret == -EPROBE_DEFER) + goto err; + drm_err(dev, "clock %u not found: %d\n", i, ret); + continue; + } + ret = clk_prepare_enable(clock); + if (ret) { + drm_err(dev, "failed to enable clock %u: %d\n", + i, ret); + clk_put(clock); + } + sdev->clks[i] = clock; + } + + return devm_add_action_or_reset(&pdev->dev, + simpledrm_device_release_clocks, + sdev); + +err: + while (i) { + --i; + if (sdev->clks[i]) { + clk_disable_unprepare(sdev->clks[i]); + clk_put(sdev->clks[i]); + } + } + return ret; +} +#else +static int simpledrm_device_init_clocks(struct simpledrm_device *sdev) +{ + return 0; +} +#endif + +#if defined CONFIG_OF && defined CONFIG_REGULATOR + +#define SUPPLY_SUFFIX "-supply" + +/* + * Regulator handling code. + * + * Here we handle the num-supplies and vin*-supply properties of our + * "simple-framebuffer" dt node. This is necessary so that we can make sure + * that any regulators needed by the display hardware that the bootloader + * set up for us (and for which it provided a simplefb dt node), stay up, + * for the life of the simplefb driver. + * + * When the driver unloads, we cleanly disable, and then release the + * regulators. + * + * We only complain about errors here, no action is taken as the most likely + * error can only happen due to a mismatch between the bootloader which set + * up simplefb, and the regulator definitions in the device tree. Chances are + * that there are no adverse effects, and if there are, a clean teardown of + * the fb probe will not help us much either. So just complain and carry on, + * and hope that the user actually gets a working fb at the end of things. + */ + +static void simpledrm_device_release_regulators(void *res) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(res); + unsigned int i; + + for (i = 0; i < sdev->regulator_count; ++i) { + if (sdev->regulators[i]) { + regulator_disable(sdev->regulators[i]); + regulator_put(sdev->regulators[i]); + } + } +} + +static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) +{ + struct drm_device *dev = &sdev->dev; + struct platform_device *pdev = sdev->pdev; + struct device_node *of_node = pdev->dev.of_node; + struct property *prop; + struct regulator *regulator; + const char *p; + unsigned int count = 0, i = 0; + int ret; + + if (dev_get_platdata(&pdev->dev) || !of_node) + return 0; + + /* Count the number of regulator supplies */ + for_each_property_of_node(of_node, prop) { + p = strstr(prop->name, SUPPLY_SUFFIX); + if (p && p != prop->name) + ++count; + } + + if (!count) + return 0; + + sdev->regulators = drmm_kzalloc(dev, + count * sizeof(sdev->regulators[0]), + GFP_KERNEL); + if (!sdev->regulators) + return -ENOMEM; + + for_each_property_of_node(of_node, prop) { + char name[32]; /* 32 is max size of property name */ + size_t len; + + p = strstr(prop->name, SUPPLY_SUFFIX); + if (!p || p == prop->name) + continue; + len = strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1; + strscpy(name, prop->name, min(sizeof(name), len)); + + regulator = regulator_get_optional(&pdev->dev, name); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + if (ret == -EPROBE_DEFER) + goto err; + drm_err(dev, "regulator %s not found: %d\n", + name, ret); + continue; + } + + ret = regulator_enable(regulator); + if (ret) { + drm_err(dev, "failed to enable regulator %u: %d\n", + i, ret); + regulator_put(regulator); + } + + sdev->regulators[i++] = regulator; + } + sdev->regulator_count = i; + + return devm_add_action_or_reset(&pdev->dev, + simpledrm_device_release_regulators, + sdev); + +err: + while (i) { + --i; + if (sdev->regulators[i]) { + regulator_disable(sdev->regulators[i]); + regulator_put(sdev->regulators[i]); + } + } + return ret; +} +#else +static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) +{ + return 0; +} +#endif + +/* + * Simplefb settings + */ + +static struct drm_display_mode simpledrm_mode(unsigned int width, + unsigned int height) +{ + struct drm_display_mode mode = { SIMPLEDRM_MODE(width, height) }; + + mode.clock = 60 /* Hz */ * mode.hdisplay * mode.vdisplay; + drm_mode_set_name(&mode); + + return mode; +} + +static int simpledrm_device_init_fb(struct simpledrm_device *sdev) +{ + int width, height, stride; + const struct drm_format_info *format; + struct drm_format_name_buf buf; + struct drm_device *dev = &sdev->dev; + struct platform_device *pdev = sdev->pdev; + const struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev); + struct device_node *of_node = pdev->dev.of_node; + + if (pd) { + width = simplefb_get_width_pd(dev, pd); + if (width < 0) + return width; + height = simplefb_get_height_pd(dev, pd); + if (height < 0) + return height; + stride = simplefb_get_stride_pd(dev, pd); + if (stride < 0) + return stride; + format = simplefb_get_format_pd(dev, pd); + if (IS_ERR(format)) + return PTR_ERR(format); + } else if (of_node) { + width = simplefb_get_width_of(dev, of_node); + if (width < 0) + return width; + height = simplefb_get_height_of(dev, of_node); + if (height < 0) + return height; + stride = simplefb_get_stride_of(dev, of_node); + if (stride < 0) + return stride; + format = simplefb_get_format_of(dev, of_node); + if (IS_ERR(format)) + return PTR_ERR(format); + } else { + drm_err(dev, "no simplefb configuration found\n"); + return -ENODEV; + } + + sdev->mode = simpledrm_mode(width, height); + sdev->format = format; + sdev->pitch = stride; + + drm_dbg_kms(dev, "display mode={" DRM_MODE_FMT "}\n", + DRM_MODE_ARG(&sdev->mode)); + drm_dbg_kms(dev, + "framebuffer format=\"%s\", size=%dx%d, stride=%d byte\n", + drm_get_format_name(format->format, &buf), width, + height, stride); + + return 0; +} + +/* + * Memory management + */ + +static int simpledrm_device_init_mm(struct simpledrm_device *sdev) +{ + struct platform_device *pdev = sdev->pdev; + struct resource *mem; + void __iomem *screen_base; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; + + screen_base = devm_ioremap_wc(&pdev->dev, mem->start, + resource_size(mem)); + if (!screen_base) + return -ENOMEM; + + sdev->mem = mem; + sdev->screen_base = screen_base; + + return 0; +} + +/* + * Modesetting + */ + +/* + * Support all formats of simplefb and maybe more; in order + * of preference. The display's update function will do any + * conversion necessary. + * + * TODO: Add blit helpers for remaining formats and uncomment + * constants. + */ +static const uint32_t simpledrm_default_formats[] = { + DRM_FORMAT_XRGB8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_RGB565, + //DRM_FORMAT_XRGB1555, + //DRM_FORMAT_ARGB1555, + DRM_FORMAT_RGB888, + //DRM_FORMAT_XRGB2101010, + //DRM_FORMAT_ARGB2101010, +}; + +static const uint64_t simpledrm_format_modifiers[] = { + DRM_FORMAT_MOD_LINEAR, + DRM_FORMAT_MOD_INVALID +}; + +static int simpledrm_connector_helper_get_modes(struct drm_connector *connector) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(connector->dev); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &sdev->mode); + if (!mode) + return 0; + + if (mode->name[0] == '\0') + drm_mode_set_name(mode); + + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + if (mode->width_mm) + connector->display_info.width_mm = mode->width_mm; + if (mode->height_mm) + connector->display_info.height_mm = mode->height_mm; + + return 1; +} + +static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs = { + .get_modes = simpledrm_connector_helper_get_modes, +}; + +static const struct drm_connector_funcs simpledrm_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int +simpledrm_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe, + const struct drm_display_mode *mode) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev); + + if (mode->hdisplay != sdev->mode.hdisplay && + mode->vdisplay != sdev->mode.vdisplay) + return MODE_ONE_SIZE; + else if (mode->hdisplay != sdev->mode.hdisplay) + return MODE_ONE_WIDTH; + else if (mode->vdisplay != sdev->mode.vdisplay) + return MODE_ONE_HEIGHT; + + return MODE_OK; +} + +static void +simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev); + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + struct drm_framebuffer *fb = plane_state->fb; + void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */ + + if (!fb) + return; + + drm_fb_blit_dstclip(sdev->screen_base, sdev->pitch, + sdev->format->format, vmap, fb); +} + +static void +simpledrm_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev); + struct drm_device *dev = &sdev->dev; + int idx; + + if (!drm_dev_enter(dev, &idx)) + return; + + /* Clear screen to black if disabled */ + memset_io(sdev->screen_base, 0, sdev->pitch * sdev->mode.vdisplay); + + drm_dev_exit(idx); +} + +static void +simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_plane_state) +{ + struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev); + struct drm_plane_state *plane_state = pipe->plane.state; + struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); + void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */ + struct drm_framebuffer *fb = plane_state->fb; + struct drm_rect clip; + + if (!fb) + return; + + if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip)) + return; + + drm_fb_blit_rect_dstclip(sdev->screen_base, sdev->pitch, + sdev->format->format, vmap, fb, &clip); +} + +static const struct drm_simple_display_pipe_funcs +simpledrm_simple_display_pipe_funcs = { + .mode_valid = simpledrm_simple_display_pipe_mode_valid, + .enable = simpledrm_simple_display_pipe_enable, + .disable = simpledrm_simple_display_pipe_disable, + .update = simpledrm_simple_display_pipe_update, + DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS, +}; + +static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = { + .fb_create = drm_gem_fb_create_with_dirty, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +static const uint32_t *simpledrm_device_formats(struct simpledrm_device *sdev, + size_t *nformats_out) +{ + struct drm_device *dev = &sdev->dev; + size_t i; + + if (sdev->nformats) + goto out; /* don't rebuild list on recurring calls */ + + /* native format goes first */ + sdev->formats[0] = sdev->format->format; + sdev->nformats = 1; + + /* default formats go second */ + for (i = 0; i < ARRAY_SIZE(simpledrm_default_formats); ++i) { + if (simpledrm_default_formats[i] == sdev->format->format) + continue; /* native format already went first */ + sdev->formats[sdev->nformats] = simpledrm_default_formats[i]; + sdev->nformats++; + } + + /* + * TODO: The simpledrm driver converts framebuffers to the native + * format when copying them to device memory. If there are more + * formats listed than supported by the driver, the native format + * is not supported by the conversion helpers. Therefore *only* + * support the native format and add a conversion helper ASAP. + */ + if (drm_WARN_ONCE(dev, i != sdev->nformats, + "format conversion helpers required for %p4cc", + &sdev->format->format)) { + sdev->nformats = 1; + } + +out: + *nformats_out = sdev->nformats; + return sdev->formats; +} + +static int simpledrm_device_init_modeset(struct simpledrm_device *sdev) +{ + struct drm_device *dev = &sdev->dev; + struct drm_display_mode *mode = &sdev->mode; + struct drm_connector *connector = &sdev->connector; + struct drm_simple_display_pipe *pipe = &sdev->pipe; + const uint32_t *formats; + size_t nformats; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.min_width = mode->hdisplay; + dev->mode_config.max_width = mode->hdisplay; + dev->mode_config.min_height = mode->vdisplay; + dev->mode_config.max_height = mode->vdisplay; + dev->mode_config.prefer_shadow_fbdev = true; + dev->mode_config.preferred_depth = sdev->format->cpp[0] * 8; + dev->mode_config.funcs = &simpledrm_mode_config_funcs; + + ret = drm_connector_init(dev, connector, &simpledrm_connector_funcs, + DRM_MODE_CONNECTOR_Unknown); + if (ret) + return ret; + drm_connector_helper_add(connector, &simpledrm_connector_helper_funcs); + + formats = simpledrm_device_formats(sdev, &nformats); + + ret = drm_simple_display_pipe_init(dev, pipe, &simpledrm_simple_display_pipe_funcs, + formats, nformats, simpledrm_format_modifiers, + connector); + if (ret) + return ret; + + drm_mode_config_reset(dev); + + return 0; +} + +/* + * Init / Cleanup + */ + +static struct simpledrm_device * +simpledrm_device_create(struct drm_driver *drv, struct platform_device *pdev) +{ + struct simpledrm_device *sdev; + int ret; + + sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device, + dev); + if (IS_ERR(sdev)) + return ERR_CAST(sdev); + sdev->pdev = pdev; + platform_set_drvdata(pdev, sdev); + + ret = simpledrm_device_init_clocks(sdev); + if (ret) + return ERR_PTR(ret); + ret = simpledrm_device_init_regulators(sdev); + if (ret) + return ERR_PTR(ret); + ret = simpledrm_device_init_fb(sdev); + if (ret) + return ERR_PTR(ret); + ret = simpledrm_device_init_mm(sdev); + if (ret) + return ERR_PTR(ret); + ret = simpledrm_device_init_modeset(sdev); + if (ret) + return ERR_PTR(ret); + + return sdev; +} + +/* + * DRM driver + */ + +DEFINE_DRM_GEM_FOPS(simpledrm_fops); + +static struct drm_driver simpledrm_driver = { + DRM_GEM_SHMEM_DRIVER_OPS, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET, + .fops = &simpledrm_fops, +}; + +/* + * Platform driver + */ + +static int simpledrm_probe(struct platform_device *pdev) +{ + struct simpledrm_device *sdev; + struct drm_device *dev; + int ret; + + sdev = simpledrm_device_create(&simpledrm_driver, pdev); + if (IS_ERR(sdev)) + return PTR_ERR(sdev); + dev = &sdev->dev; + + ret = drm_dev_register(dev, 0); + if (ret) + return ret; + + drm_fbdev_generic_setup(dev, 0); + + return 0; +} + +static int simpledrm_remove(struct platform_device *pdev) +{ + struct simpledrm_device *sdev = platform_get_drvdata(pdev); + struct drm_device *dev = &sdev->dev; + + drm_dev_unregister(dev); + + return 0; +} + +static const struct of_device_id simpledrm_of_match_table[] = { + { .compatible = "simple-framebuffer", }, + { }, +}; +MODULE_DEVICE_TABLE(of, simpledrm_of_match_table); + +static struct platform_driver simpledrm_platform_driver = { + .driver = { + .name = "simple-framebuffer", /* connect to sysfb */ + .of_match_table = simpledrm_of_match_table, + }, + .probe = simpledrm_probe, + .remove = simpledrm_remove, +}; + +module_platform_driver(simpledrm_platform_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 4f02db65dede..5e1ad0c92bfc 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -2192,7 +2192,7 @@ config FB_HYPERV config FB_SIMPLE bool "Simple framebuffer support" - depends on (FB = y) + depends on (FB = y) && !DRM_SIMPLEDRM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3 From 767d724a160eb1cd00c86fb8c2e21fa1ab3c37ac Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 6 May 2021 20:57:05 +0200 Subject: video: fbdev: imxfb: Fix an error message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'ret' is known to be 0 here. No error code is available, so just remove it from the error message. Fixes: 72330b0eeefc ("i.MX Framebuffer: Use readl/writel instead of direct pointer deref") Reviewed-by: Uwe Kleine-König Signed-off-by: Christophe JAILLET Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/d7b25026f82659da3c6f7159eea480faa9d738be.1620327302.git.christophe.jaillet@wanadoo.fr --- drivers/video/fbdev/imxfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index 7f8debd2da06..ad598257ab38 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -992,7 +992,7 @@ static int imxfb_probe(struct platform_device *pdev) info->screen_buffer = dma_alloc_wc(&pdev->dev, fbi->map_size, &fbi->map_dma, GFP_KERNEL); if (!info->screen_buffer) { - dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret); + dev_err(&pdev->dev, "Failed to allocate video RAM\n"); ret = -ENOMEM; goto failed_map; } -- cgit v1.2.3