From 57c76221d5af648c8355a55c09b050c5d8d38189 Mon Sep 17 00:00:00 2001 From: Akira Shimahara Date: Mon, 11 May 2020 22:38:20 +0200 Subject: w1_therm: adding bulk read support to trigger multiple conversion on bus Adding bulk read support: Sending a 'trigger' command in the dedicated sysfs entry of bus master device send a conversion command for all the slaves on the bus. The sysfs entry is added as soon as at least one device supporting this feature is detected on the bus. The behavior of the sysfs reading temperature on the device is as follow: * If no bulk read pending, trigger a conversion on the device, wait for the conversion to be done, read the temperature in device RAM * If a bulk read has been trigger, access directly the device RAM This behavior is the same on the 2 sysfs entries ('temperature' and 'w1_slave'). Reading the therm_bulk_read sysfs give the status of bulk operations: * '-1': conversion in progress on at least 1 sensor * '1': conversion complete but at least one sensor has not been read yet * '0': no bulk operation. Reading temperature on ecah device will trigger a conversion As not all devices support bulk read feature, it has been added in device family structure. The attribute is set at master level as soon as a supporting device is discover. It is removed when the last supported device leave the bus. The count of supported device is kept with the static counter bulk_read_device_counter. A strong pull up is apply on the line if at least one device required it. The duration of the pull up is the max time required by a device on the line, which depends on the resolution settings of each device. The strong pull up could be adjust with the a module parameter. Updating documentation in Documentation/ABI/testing/sysfs-driver-w1_therm and Documentation/w1/slaves/w1_therm.rst accordingly. Signed-off-by: Akira Shimahara Link: https://lore.kernel.org/r/20200511203820.411483-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/w1/slaves/w1_therm.c | 251 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 249 insertions(+), 2 deletions(-) (limited to 'drivers/w1/slaves') diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 825536196e61..cc4b88056b33 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -43,6 +43,9 @@ static int w1_strong_pullup = 1; module_param_named(strong_pullup, w1_strong_pullup, int, 0); +/* Counter for devices supporting bulk reading */ +static u16 bulk_read_device_counter; /* =0 as per C standard */ + /* This command should be in public header w1.h but is not */ #define W1_RECALL_EEPROM 0xB8 @@ -57,6 +60,7 @@ module_param_named(strong_pullup, w1_strong_pullup, int, 0); #define EEPROM_CMD_WRITE "save" /* cmd for write eeprom sysfs */ #define EEPROM_CMD_READ "restore" /* cmd for read eeprom sysfs */ +#define BULK_TRIGGER_CMD "trigger" /* cmd to trigger a bulk read */ #define MIN_TEMP -55 /* min temperature that can be mesured */ #define MAX_TEMP 125 /* max temperature that can be mesured */ @@ -84,6 +88,15 @@ module_param_named(strong_pullup, w1_strong_pullup, int, 0); #define SLAVE_RESOLUTION(sl) \ (((struct w1_therm_family_data *)(sl->family_data))->resolution) +/* + * return whether or not a converT command has been issued to the slave + * * 0: no bulk read is pending + * * -1: conversion is in progress + * * 1: conversion done, result to be read + */ +#define SLAVE_CONVERT_TRIGGERED(sl) \ + (((struct w1_therm_family_data *)(sl->family_data))->convert_triggered) + /* return the address of the refcnt in the family data */ #define THERM_REFCNT(family_data) \ (&((struct w1_therm_family_data *)family_data)->refcnt) @@ -100,6 +113,7 @@ module_param_named(strong_pullup, w1_strong_pullup, int, 0); * @set_resolution: pointer to the device set_resolution function * @get_resolution: pointer to the device get_resolution function * @write_data: pointer to the device writing function (2 or 3 bytes) + * @bulk_read: true if device family support bulk read, false otherwise */ struct w1_therm_family_converter { u8 broken; @@ -110,6 +124,7 @@ struct w1_therm_family_converter { int (*set_resolution)(struct w1_slave *sl, int val); int (*get_resolution)(struct w1_slave *sl); int (*write_data)(struct w1_slave *sl, const u8 *data); + bool bulk_read; }; /** @@ -120,6 +135,7 @@ struct w1_therm_family_converter { * 0 device parasite powered, * -x error or undefined * @resolution: current device resolution + * @convert_triggered: conversion state of the device * @specific_functions: pointer to struct of device specific function */ struct w1_therm_family_data { @@ -127,6 +143,7 @@ struct w1_therm_family_data { atomic_t refcnt; int external_powered; int resolution; + int convert_triggered; struct w1_therm_family_converter *specific_functions; }; @@ -218,6 +235,18 @@ static int recall_eeprom(struct w1_slave *sl); */ static int read_powermode(struct w1_slave *sl); +/** + * trigger_bulk_read() - function to trigger a bulk read on the bus + * @dev_master: the device master of the bus + * + * Send a SKIP ROM follow by a CONVERT T commmand on the bus. + * It also set the status flag in each slave &struct w1_therm_family_data + * to signal that a conversion is in progress. + * + * Return: 0 if success, -kernel error code otherwise + */ +static int trigger_bulk_read(struct w1_master *dev_master); + /* Sysfs interface declaration */ static ssize_t w1_slave_show(struct device *device, @@ -250,6 +279,12 @@ static ssize_t alarms_store(struct device *device, static ssize_t alarms_show(struct device *device, struct device_attribute *attr, char *buf); +static ssize_t therm_bulk_read_store(struct device *device, + struct device_attribute *attr, const char *buf, size_t size); + +static ssize_t therm_bulk_read_show(struct device *device, + struct device_attribute *attr, char *buf); + /* Attributes declarations */ static DEVICE_ATTR_RW(w1_slave); @@ -260,6 +295,8 @@ static DEVICE_ATTR_RW(resolution); static DEVICE_ATTR_WO(eeprom); static DEVICE_ATTR_RW(alarms); +static DEVICE_ATTR_RW(therm_bulk_read); /* attribut at master level */ + /* Interface Functions declaration */ /** @@ -572,6 +609,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { .set_resolution = NULL, /* no config register */ .get_resolution = NULL, /* no config register */ .write_data = w1_DS18S20_write_data, + .bulk_read = true }, { .f = &w1_therm_family_DS1822, @@ -580,6 +618,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { .set_resolution = w1_DS18B20_set_resolution, .get_resolution = w1_DS18B20_get_resolution, .write_data = w1_DS18B20_write_data, + .bulk_read = true }, { .f = &w1_therm_family_DS18B20, @@ -588,6 +627,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { .set_resolution = w1_DS18B20_set_resolution, .get_resolution = w1_DS18B20_get_resolution, .write_data = w1_DS18B20_write_data, + .bulk_read = true }, { .f = &w1_therm_family_DS28EA00, @@ -596,6 +636,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { .set_resolution = w1_DS18B20_set_resolution, .get_resolution = w1_DS18B20_get_resolution, .write_data = w1_DS18B20_write_data, + .bulk_read = false }, { .f = &w1_therm_family_DS1825, @@ -604,6 +645,7 @@ static struct w1_therm_family_converter w1_therm_families[] = { .set_resolution = w1_DS18B20_set_resolution, .get_resolution = w1_DS18B20_get_resolution, .write_data = w1_DS18B20_write_data, + .bulk_read = true } }; @@ -657,6 +699,23 @@ static inline bool bus_mutex_lock(struct mutex *lock) return true; } +/** + * support_bulk_read() - check if slave support bulk read + * @sl: device to check the ability + * + * Return: true if bulk read is supported, false if not or error + */ +static inline bool bulk_read_support(struct w1_slave *sl) +{ + if (SLAVE_SPECIFIC_FUNC(sl)) + return SLAVE_SPECIFIC_FUNC(sl)->bulk_read; + + dev_info(&sl->dev, + "%s: Device not supported by the driver\n", __func__); + + return false; /* No device family */ +} + /** * conversion_time() - get the Tconv for the slave * @sl: device to get the conversion time @@ -741,6 +800,24 @@ static int w1_therm_add_slave(struct w1_slave *sl) /* save this pointer to the device structure */ SLAVE_SPECIFIC_FUNC(sl) = sl_family_conv; + if (bulk_read_support(sl)) { + /* + * add the sys entry to trigger bulk_read + * at master level only the 1st time + */ + if (!bulk_read_device_counter) { + int err = device_create_file(&sl->master->dev, + &dev_attr_therm_bulk_read); + + if (err) + dev_warn(&sl->dev, + "%s: Device has been added, but bulk read is unavailable. err=%d\n", + __func__, err); + } + /* Increment the counter */ + bulk_read_device_counter++; + } + /* Getting the power mode of the device {external, parasite} */ SLAVE_POWERMODE(sl) = read_powermode(sl); @@ -763,6 +840,9 @@ static int w1_therm_add_slave(struct w1_slave *sl) } } + /* Finally initialize convert_triggered flag */ + SLAVE_CONVERT_TRIGGERED(sl) = 0; + return 0; } @@ -770,6 +850,14 @@ static void w1_therm_remove_slave(struct w1_slave *sl) { int refcnt = atomic_sub_return(1, THERM_REFCNT(sl->family_data)); + if (bulk_read_support(sl)) { + bulk_read_device_counter--; + /* Delete the entry if no more device support the feature */ + if (!bulk_read_device_counter) + device_remove_file(&sl->master->dev, + &dev_attr_therm_bulk_read); + } + while (refcnt) { msleep(1000); refcnt = atomic_read(THERM_REFCNT(sl->family_data)); @@ -1084,6 +1172,96 @@ error: return ret; } +static int trigger_bulk_read(struct w1_master *dev_master) +{ + struct w1_slave *sl = NULL; /* used to iterate through slaves */ + int max_trying = W1_THERM_MAX_TRY; + int t_conv = 0; + int ret = -ENODEV; + bool strong_pullup = false; + + /* + * Check whether there are parasite powered device on the bus, + * and compute duration of conversion for these devices + * so we can apply a strong pullup if required + */ + list_for_each_entry(sl, &dev_master->slist, w1_slave_entry) { + if (!sl->family_data) + goto error; + if (bulk_read_support(sl)) { + int t_cur = conversion_time(sl); + + t_conv = t_cur > t_conv ? t_cur : t_conv; + strong_pullup = strong_pullup || + (w1_strong_pullup == 2 || + (!SLAVE_POWERMODE(sl) && + w1_strong_pullup)); + } + } + + /* + * t_conv is the max conversion time required on the bus + * If its 0, no device support the bulk read feature + */ + if (!t_conv) + goto error; + + if (!bus_mutex_lock(&dev_master->bus_mutex)) { + ret = -EAGAIN; /* Didn't acquire the mutex */ + goto error; + } + + while ((max_trying--) && (ret < 0)) { /* ret should be either 0 */ + + if (!w1_reset_bus(dev_master)) { /* Just reset the bus */ + unsigned long sleep_rem; + + w1_write_8(dev_master, W1_SKIP_ROM); + + if (strong_pullup) /* Apply pullup if required */ + w1_next_pullup(dev_master, t_conv); + + w1_write_8(dev_master, W1_CONVERT_TEMP); + + /* set a flag to instruct that converT pending */ + list_for_each_entry(sl, + &dev_master->slist, w1_slave_entry) { + if (bulk_read_support(sl)) + SLAVE_CONVERT_TRIGGERED(sl) = -1; + } + + if (strong_pullup) { /* some device need pullup */ + sleep_rem = msleep_interruptible(t_conv); + if (sleep_rem != 0) { + ret = -EINTR; + goto mt_unlock; + } + mutex_unlock(&dev_master->bus_mutex); + } else { + mutex_unlock(&dev_master->bus_mutex); + sleep_rem = msleep_interruptible(t_conv); + if (sleep_rem != 0) { + ret = -EINTR; + goto set_flag; + } + } + ret = 0; + goto set_flag; + } + } + +mt_unlock: + mutex_unlock(&dev_master->bus_mutex); +set_flag: + /* set a flag to register convsersion is done */ + list_for_each_entry(sl, &dev_master->slist, w1_slave_entry) { + if (bulk_read_support(sl)) + SLAVE_CONVERT_TRIGGERED(sl) = 1; + } +error: + return ret; +} + /* Sysfs Interface definition */ static ssize_t w1_slave_show(struct device *device, @@ -1095,7 +1273,20 @@ static ssize_t w1_slave_show(struct device *device, int ret, i; ssize_t c = PAGE_SIZE; - ret = convert_t(sl, &info); + if (bulk_read_support(sl)) { + if (SLAVE_CONVERT_TRIGGERED(sl) < 0) { + dev_dbg(device, + "%s: Conversion in progress, retry later\n", + __func__); + return 0; + } else if (SLAVE_CONVERT_TRIGGERED(sl) > 0) { + /* A bulk read has been issued, read the device RAM */ + ret = read_scratchpad(sl, &info); + SLAVE_CONVERT_TRIGGERED(sl) = 0; + } else + ret = convert_t(sl, &info); + } else + ret = convert_t(sl, &info); if (ret < 0) { dev_dbg(device, @@ -1176,7 +1367,20 @@ static ssize_t temperature_show(struct device *device, return 0; /* No device family */ } - ret = convert_t(sl, &info); + if (bulk_read_support(sl)) { + if (SLAVE_CONVERT_TRIGGERED(sl) < 0) { + dev_dbg(device, + "%s: Conversion in progress, retry later\n", + __func__); + return 0; + } else if (SLAVE_CONVERT_TRIGGERED(sl) > 0) { + /* A bulk read has been issued, read the device RAM */ + ret = read_scratchpad(sl, &info); + SLAVE_CONVERT_TRIGGERED(sl) = 0; + } else + ret = convert_t(sl, &info); + } else + ret = convert_t(sl, &info); if (ret < 0) { dev_dbg(device, @@ -1412,6 +1616,49 @@ free_m: return size; } +static ssize_t therm_bulk_read_store(struct device *device, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct w1_master *dev_master = dev_to_w1_master(device); + int ret = -EINVAL; /* Invalid argument */ + + if (size == sizeof(BULK_TRIGGER_CMD)) + if (!strncmp(buf, BULK_TRIGGER_CMD, + sizeof(BULK_TRIGGER_CMD)-1)) + ret = trigger_bulk_read(dev_master); + + if (ret) + dev_info(device, + "%s: unable to trigger a bulk read on the bus. err=%d\n", + __func__, ret); + + return size; +} + +static ssize_t therm_bulk_read_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct w1_master *dev_master = dev_to_w1_master(device); + struct w1_slave *sl = NULL; + int ret = 0; + + list_for_each_entry(sl, &dev_master->slist, w1_slave_entry) { + if (sl->family_data) { + if (bulk_read_support(sl)) { + if (SLAVE_CONVERT_TRIGGERED(sl) == -1) { + ret = -1; + goto show_result; + } + if (SLAVE_CONVERT_TRIGGERED(sl) == 1) + /* continue to check other slaves */ + ret = 1; + } + } + } +show_result: + return sprintf(buf, "%d\n", ret); +} + #if IS_REACHABLE(CONFIG_HWMON) static int w1_read_temp(struct device *device, u32 attr, int channel, long *val) -- cgit v1.2.3