From 81f6075ebcf3b0800321b7d81e4845d6ad9566d8 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 23 Mar 2006 19:11:58 +0300 Subject: [PATCH] w1: Replace dscore and ds_w1_bridge with ds2490 driver. --- drivers/w1/masters/Kconfig | 27 +- drivers/w1/masters/Makefile | 7 +- drivers/w1/masters/ds2490.c | 947 ++++++++++++++++++++++++++++++++++++++ drivers/w1/masters/ds_w1_bridge.c | 174 ------- drivers/w1/masters/dscore.c | 795 -------------------------------- drivers/w1/masters/dscore.h | 166 ------- 6 files changed, 957 insertions(+), 1159 deletions(-) create mode 100644 drivers/w1/masters/ds2490.c delete mode 100644 drivers/w1/masters/ds_w1_bridge.c delete mode 100644 drivers/w1/masters/dscore.c delete mode 100644 drivers/w1/masters/dscore.h (limited to 'drivers/w1') diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c6bad4dbdc64..2fb425536eae 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -15,24 +15,15 @@ config W1_MASTER_MATROX This support is also available as a module. If so, the module will be called matrox_w1.ko. -config W1_MASTER_DS9490 - tristate "DS9490R transport layer driver" - depends on W1 && USB - help - Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge. - - This support is also available as a module. If so, the module - will be called ds9490r.ko. - -config W1_MASTER_DS9490_BRIDGE - tristate "DS9490R USB <-> W1 transport layer for 1-wire" - depends on W1_MASTER_DS9490 - help - Say Y here if you want to communicate with your 1-wire devices - using DS9490R USB bridge. - - This support is also available as a module. If so, the module - will be called ds_w1_bridge.ko. +config W1_MASTER_DS2490 + tristate "DS2490 USB <-> W1 transport layer for 1-wire" + depends on W1 && USB + help + Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges, + for example DS9490*. + + This support is also available as a module. If so, the module + will be called ds2490.ko. config W1_MASTER_DS2482 tristate "Maxim DS2482 I2C to 1-Wire bridge" diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 1f3c8b983dc1..4cee256a8134 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -3,11 +3,6 @@ # obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o - -obj-$(CONFIG_W1_MASTER_DS9490) += ds9490r.o -ds9490r-objs := dscore.o - -obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o - +obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c new file mode 100644 index 000000000000..637677833da5 --- /dev/null +++ b/drivers/w1/masters/ds2490.c @@ -0,0 +1,947 @@ +/* + * dscore.c + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include "../w1_int.h" +#include "../w1.h" + +/* COMMAND TYPE CODES */ +#define CONTROL_CMD 0x00 +#define COMM_CMD 0x01 +#define MODE_CMD 0x02 + +/* CONTROL COMMAND CODES */ +#define CTL_RESET_DEVICE 0x0000 +#define CTL_START_EXE 0x0001 +#define CTL_RESUME_EXE 0x0002 +#define CTL_HALT_EXE_IDLE 0x0003 +#define CTL_HALT_EXE_DONE 0x0004 +#define CTL_FLUSH_COMM_CMDS 0x0007 +#define CTL_FLUSH_RCV_BUFFER 0x0008 +#define CTL_FLUSH_XMT_BUFFER 0x0009 +#define CTL_GET_COMM_CMDS 0x000A + +/* MODE COMMAND CODES */ +#define MOD_PULSE_EN 0x0000 +#define MOD_SPEED_CHANGE_EN 0x0001 +#define MOD_1WIRE_SPEED 0x0002 +#define MOD_STRONG_PU_DURATION 0x0003 +#define MOD_PULLDOWN_SLEWRATE 0x0004 +#define MOD_PROG_PULSE_DURATION 0x0005 +#define MOD_WRITE1_LOWTIME 0x0006 +#define MOD_DSOW0_TREC 0x0007 + +/* COMMUNICATION COMMAND CODES */ +#define COMM_ERROR_ESCAPE 0x0601 +#define COMM_SET_DURATION 0x0012 +#define COMM_BIT_IO 0x0020 +#define COMM_PULSE 0x0030 +#define COMM_1_WIRE_RESET 0x0042 +#define COMM_BYTE_IO 0x0052 +#define COMM_MATCH_ACCESS 0x0064 +#define COMM_BLOCK_IO 0x0074 +#define COMM_READ_STRAIGHT 0x0080 +#define COMM_DO_RELEASE 0x6092 +#define COMM_SET_PATH 0x00A2 +#define COMM_WRITE_SRAM_PAGE 0x00B2 +#define COMM_WRITE_EPROM 0x00C4 +#define COMM_READ_CRC_PROT_PAGE 0x00D4 +#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4 +#define COMM_SEARCH_ACCESS 0x00F4 + +/* Communication command bits */ +#define COMM_TYPE 0x0008 +#define COMM_SE 0x0008 +#define COMM_D 0x0008 +#define COMM_Z 0x0008 +#define COMM_CH 0x0008 +#define COMM_SM 0x0008 +#define COMM_R 0x0008 +#define COMM_IM 0x0001 + +#define COMM_PS 0x4000 +#define COMM_PST 0x4000 +#define COMM_CIB 0x4000 +#define COMM_RTS 0x4000 +#define COMM_DT 0x2000 +#define COMM_SPU 0x1000 +#define COMM_F 0x0800 +#define COMM_NTP 0x0400 +#define COMM_ICP 0x0200 +#define COMM_RST 0x0100 + +#define PULSE_PROG 0x01 +#define PULSE_SPUE 0x02 + +#define BRANCH_MAIN 0xCC +#define BRANCH_AUX 0x33 + +/* + * Duration of the strong pull-up pulse in milliseconds. + */ +#define PULLUP_PULSE_DURATION 750 + +/* Status flags */ +#define ST_SPUA 0x01 /* Strong Pull-up is active */ +#define ST_PRGA 0x02 /* 12V programming pulse is being generated */ +#define ST_12VP 0x04 /* external 12V programming voltage is present */ +#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */ +#define ST_HALT 0x10 /* DS2490 is currently halted */ +#define ST_IDLE 0x20 /* DS2490 is currently idle */ +#define ST_EPOF 0x80 + +#define SPEED_NORMAL 0x00 +#define SPEED_FLEXIBLE 0x01 +#define SPEED_OVERDRIVE 0x02 + +#define NUM_EP 4 +#define EP_CONTROL 0 +#define EP_STATUS 1 +#define EP_DATA_OUT 2 +#define EP_DATA_IN 3 + +struct ds_device +{ + struct list_head ds_entry; + + struct usb_device *udev; + struct usb_interface *intf; + + int ep[NUM_EP]; + + struct w1_bus_master master; +}; + +struct ds_status +{ + u8 enable; + u8 speed; + u8 pullup_dur; + u8 ppuls_dur; + u8 pulldown_slew; + u8 write1_time; + u8 write0_time; + u8 reserved0; + u8 status; + u8 command0; + u8 command1; + u8 command_buffer_status; + u8 data_out_buffer_status; + u8 data_in_buffer_status; + u8 reserved1; + u8 reserved2; + +}; + +static struct usb_device_id ds_id_table [] = { + { USB_DEVICE(0x04fa, 0x2490) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, ds_id_table); + +static int ds_probe(struct usb_interface *, const struct usb_device_id *); +static void ds_disconnect(struct usb_interface *); + +static inline void ds_dump_status(unsigned char *, unsigned char *, int); +static int ds_send_control(struct ds_device *, u16, u16); +static int ds_send_control_cmd(struct ds_device *, u16, u16); + +static LIST_HEAD(ds_devices); +static DECLARE_MUTEX(ds_mutex); + +static struct usb_driver ds_driver = { + .name = "DS9490R", + .probe = ds_probe, + .disconnect = ds_disconnect, + .id_table = ds_id_table, +}; + +static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + CONTROL_CMD, 0x40, value, index, NULL, 0, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} +#if 0 +static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + MODE_CMD, 0x40, value, index, NULL, 0, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} +#endif +static int ds_send_control(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + COMM_CMD, 0x40, value, index, NULL, 0, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off) +{ + printk("%45s: %8x\n", str, buf[off]); +} + +static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, + unsigned char *buf, int size) +{ + int count, err; + + memset(st, 0, sizeof(st)); + + count = 0; + err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100); + if (err < 0) { + printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err); + return err; + } + + if (count >= sizeof(*st)) + memcpy(st, buf, sizeof(*st)); + + return count; +} + +static int ds_recv_status(struct ds_device *dev, struct ds_status *st) +{ + unsigned char buf[64]; + int count, err = 0, i; + + memcpy(st, buf, sizeof(*st)); + + count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); + if (count < 0) + return err; + + printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count); + for (i=0; i= 16) { + ds_dump_status(buf, "enable flag", 0); + ds_dump_status(buf, "1-wire speed", 1); + ds_dump_status(buf, "strong pullup duration", 2); + ds_dump_status(buf, "programming pulse duration", 3); + ds_dump_status(buf, "pulldown slew rate control", 4); + ds_dump_status(buf, "write-1 low time", 5); + ds_dump_status(buf, "data sample offset/write-0 recovery time", 6); + ds_dump_status(buf, "reserved (test register)", 7); + ds_dump_status(buf, "device status flags", 8); + ds_dump_status(buf, "communication command byte 1", 9); + ds_dump_status(buf, "communication command byte 2", 10); + ds_dump_status(buf, "communication command buffer status", 11); + ds_dump_status(buf, "1-wire data output buffer status", 12); + ds_dump_status(buf, "1-wire data input buffer status", 13); + ds_dump_status(buf, "reserved", 14); + ds_dump_status(buf, "reserved", 15); + } + + memcpy(st, buf, sizeof(*st)); + + if (st->status & ST_EPOF) { + printk(KERN_INFO "Resetting device after ST_EPOF.\n"); + err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); + if (err) + return err; + count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); + if (count < 0) + return err; + } +#if 0 + if (st->status & ST_IDLE) { + printk(KERN_INFO "Resetting pulse after ST_IDLE.\n"); + err = ds_start_pulse(dev, PULLUP_PULSE_DURATION); + if (err) + return err; + } +#endif + + return err; +} + +static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size) +{ + int count, err; + struct ds_status st; + + count = 0; + err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]), + buf, size, &count, 1000); + if (err < 0) { + printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]); + usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN])); + ds_recv_status(dev, &st); + return err; + } + +#if 0 + { + int i; + + printk("%s: count=%d: ", __func__, count); + for (i=0; iudev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err); + return err; + } + + return err; +} + +#if 0 + +int ds_stop_pulse(struct ds_device *dev, int limit) +{ + struct ds_status st; + int count = 0, err = 0; + u8 buf[0x20]; + + do { + err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0); + if (err) + break; + err = ds_send_control(dev, CTL_RESUME_EXE, 0); + if (err) + break; + err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); + if (err) + break; + + if ((st.status & ST_SPUA) == 0) { + err = ds_send_control_mode(dev, MOD_PULSE_EN, 0); + if (err) + break; + } + } while(++count < limit); + + return err; +} + +int ds_detect(struct ds_device *dev, struct ds_status *st) +{ + int err; + + err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); + if (err) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0); + if (err) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40); + if (err) + return err; + + err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG); + if (err) + return err; + + err = ds_recv_status(dev, st); + + return err; +} + +#endif /* 0 */ + +static int ds_wait_status(struct ds_device *dev, struct ds_status *st) +{ + u8 buf[0x20]; + int err, count = 0; + + do { + err = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); +#if 0 + if (err >= 0) { + int i; + printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); + for (i=0; i 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) { + ds_recv_status(dev, st); + return -1; + } else + return 0; +} + +static int ds_reset(struct ds_device *dev, struct ds_status *st) +{ + int err; + + //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE); + err = ds_send_control(dev, 0x43, SPEED_NORMAL); + if (err) + return err; + + ds_wait_status(dev, st); +#if 0 + if (st->command_buffer_status) { + printk(KERN_INFO "Short circuit.\n"); + return -EIO; + } +#endif + + return 0; +} + +#if 0 +static int ds_set_speed(struct ds_device *dev, int speed) +{ + int err; + + if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE) + return -EINVAL; + + if (speed != SPEED_OVERDRIVE) + speed = SPEED_FLEXIBLE; + + speed &= 0xff; + + err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed); + if (err) + return err; + + return err; +} +#endif /* 0 */ + +static int ds_start_pulse(struct ds_device *dev, int delay) +{ + int err; + u8 del = 1 + (u8)(delay >> 4); + struct ds_status st; + +#if 0 + err = ds_stop_pulse(dev, 10); + if (err) + return err; + + err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); + if (err) + return err; +#endif + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del); + if (err) + return err; + + err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0); + if (err) + return err; + + mdelay(delay); + + ds_wait_status(dev, &st); + + return err; +} + +static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit) +{ + int err, count; + struct ds_status st; + u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0); + u16 cmd; + + err = ds_send_control(dev, value, 0); + if (err) + return err; + + count = 0; + do { + err = ds_wait_status(dev, &st); + if (err) + return err; + + cmd = st.command0 | (st.command1 << 8); + } while (cmd != value && ++count < 10); + + if (err < 0 || count >= 10) { + printk(KERN_ERR "Failed to obtain status.\n"); + return -EINVAL; + } + + err = ds_recv_data(dev, tbit, sizeof(*tbit)); + if (err < 0) + return err; + + return 0; +} + +static int ds_write_bit(struct ds_device *dev, u8 bit) +{ + int err; + struct ds_status st; + + err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +static int ds_write_byte(struct ds_device *dev, u8 byte) +{ + int err; + struct ds_status st; + u8 rbyte; + + err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte); + if (err) + return err; + + err = ds_wait_status(dev, &st); + if (err) + return err; + + err = ds_recv_data(dev, &rbyte, sizeof(rbyte)); + if (err < 0) + return err; + + ds_start_pulse(dev, PULLUP_PULSE_DURATION); + + return !(byte == rbyte); +} + +static int ds_read_byte(struct ds_device *dev, u8 *byte) +{ + int err; + struct ds_status st; + + err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, byte, sizeof(*byte)); + if (err < 0) + return err; + + return 0; +} + +static int ds_read_block(struct ds_device *dev, u8 *buf, int len) +{ + struct ds_status st; + int err; + + if (len > 64*1024) + return -E2BIG; + + memset(buf, 0xFF, len); + + err = ds_send_data(dev, buf, len); + if (err < 0) + return err; + + err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); + if (err) + return err; + + ds_wait_status(dev, &st); + + memset(buf, 0x00, len); + err = ds_recv_data(dev, buf, len); + + return err; +} + +static int ds_write_block(struct ds_device *dev, u8 *buf, int len) +{ + int err; + struct ds_status st; + + err = ds_send_data(dev, buf, len); + if (err < 0) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, buf, len); + if (err < 0) + return err; + + ds_start_pulse(dev, PULLUP_PULSE_DURATION); + + return !(err == len); +} + +#if 0 + +static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search) +{ + int err; + u16 value, index; + struct ds_status st; + + memset(buf, 0, sizeof(buf)); + + err = ds_send_data(ds_dev, (unsigned char *)&init, 8); + if (err) + return err; + + ds_wait_status(ds_dev, &st); + + value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS; + index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8); + err = ds_send_control(ds_dev, value, index); + if (err) + return err; + + ds_wait_status(ds_dev, &st); + + err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number); + if (err < 0) + return err; + + return err/8; +} + +static int ds_match_access(struct ds_device *dev, u64 init) +{ + int err; + struct ds_status st; + + err = ds_send_data(dev, (unsigned char *)&init, sizeof(init)); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +static int ds_set_path(struct ds_device *dev, u64 init) +{ + int err; + struct ds_status st; + u8 buf[9]; + + memcpy(buf, &init, 8); + buf[8] = BRANCH_MAIN; + + err = ds_send_data(dev, buf, sizeof(buf)); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +#endif /* 0 */ + +static u8 ds9490r_touch_bit(void *data, u8 bit) +{ + u8 ret; + struct ds_device *dev = data; + + if (ds_touch_bit(dev, bit, &ret)) + return 0; + + return ret; +} + +static void ds9490r_write_bit(void *data, u8 bit) +{ + struct ds_device *dev = data; + + ds_write_bit(dev, bit); +} + +static void ds9490r_write_byte(void *data, u8 byte) +{ + struct ds_device *dev = data; + + ds_write_byte(dev, byte); +} + +static u8 ds9490r_read_bit(void *data) +{ + struct ds_device *dev = data; + int err; + u8 bit = 0; + + err = ds_touch_bit(dev, 1, &bit); + if (err) + return 0; + + return bit & 1; +} + +static u8 ds9490r_read_byte(void *data) +{ + struct ds_device *dev = data; + int err; + u8 byte = 0; + + err = ds_read_byte(dev, &byte); + if (err) + return 0; + + return byte; +} + +static void ds9490r_write_block(void *data, const u8 *buf, int len) +{ + struct ds_device *dev = data; + + ds_write_block(dev, (u8 *)buf, len); +} + +static u8 ds9490r_read_block(void *data, u8 *buf, int len) +{ + struct ds_device *dev = data; + int err; + + err = ds_read_block(dev, buf, len); + if (err < 0) + return 0; + + return len; +} + +static u8 ds9490r_reset(void *data) +{ + struct ds_device *dev = data; + struct ds_status st; + int err; + + memset(&st, 0, sizeof(st)); + + err = ds_reset(dev, &st); + if (err) + return 1; + + return 0; +} + +static int ds_w1_init(struct ds_device *dev) +{ + memset(&dev->master, 0, sizeof(struct w1_bus_master)); + + dev->master.data = dev; + dev->master.touch_bit = &ds9490r_touch_bit; + dev->master.read_bit = &ds9490r_read_bit; + dev->master.write_bit = &ds9490r_write_bit; + dev->master.read_byte = &ds9490r_read_byte; + dev->master.write_byte = &ds9490r_write_byte; + dev->master.read_block = &ds9490r_read_block; + dev->master.write_block = &ds9490r_write_block; + dev->master.reset_bus = &ds9490r_reset; + + return w1_add_master_device(&dev->master); +} + +static void ds_w1_fini(struct ds_device *dev) +{ + w1_remove_master_device(&dev->master); +} + +static int ds_probe(struct usb_interface *intf, + const struct usb_device_id *udev_id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct usb_host_interface *iface_desc; + struct ds_device *dev; + int i, err; + + dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL); + if (!dev) { + printk(KERN_INFO "Failed to allocate new DS9490R structure.\n"); + return -ENOMEM; + } + dev->udev = usb_get_dev(udev); + if (!dev->udev) { + err = -ENOMEM; + goto err_out_free; + } + memset(dev->ep, 0, sizeof(dev->ep)); + + usb_set_intfdata(intf, dev); + + err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3); + if (err) { + printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n", + intf->altsetting[0].desc.bInterfaceNumber, err); + goto err_out_clear; + } + + err = usb_reset_configuration(dev->udev); + if (err) { + printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err); + goto err_out_clear; + } + + iface_desc = &intf->altsetting[0]; + if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { + printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints); + err = -EINVAL; + goto err_out_clear; + } + + /* + * This loop doesn'd show control 0 endpoint, + * so we will fill only 1-3 endpoints entry. + */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + dev->ep[i+1] = endpoint->bEndpointAddress; +#if 0 + printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", + i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize), + (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT", + endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); +#endif + } + + err = ds_w1_init(dev); + if (err) + goto err_out_clear; + + down(&ds_mutex); + list_add_tail(&dev->ds_entry, &ds_devices); + up(&ds_mutex); + + return 0; + +err_out_clear: + usb_set_intfdata(intf, NULL); + usb_put_dev(dev->udev); +err_out_free: + kfree(dev); + return err; +} + +static void ds_disconnect(struct usb_interface *intf) +{ + struct ds_device *dev; + + dev = usb_get_intfdata(intf); + if (!dev) + return; + + down(&ds_mutex); + list_del(&dev->ds_entry); + up(&ds_mutex); + + ds_w1_fini(dev); + + usb_set_intfdata(intf, NULL); + + usb_put_dev(dev->udev); + kfree(dev); +} + +static int ds_init(void) +{ + int err; + + err = usb_register(&ds_driver); + if (err) { + printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err); + return err; + } + + return 0; +} + +static void ds_fini(void) +{ + usb_deregister(&ds_driver); +} + +module_init(ds_init); +module_exit(ds_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)"); diff --git a/drivers/w1/masters/ds_w1_bridge.c b/drivers/w1/masters/ds_w1_bridge.c deleted file mode 100644 index 5d30783a3eb6..000000000000 --- a/drivers/w1/masters/ds_w1_bridge.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * ds_w1_bridge.c - * - * Copyright (c) 2004 Evgeniy Polyakov - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include - -#include "../w1.h" -#include "../w1_int.h" -#include "dscore.h" - -static struct ds_device *ds_dev; -static struct w1_bus_master *ds_bus_master; - -static u8 ds9490r_touch_bit(void *data, u8 bit) -{ - u8 ret; - struct ds_device *dev = data; - - if (ds_touch_bit(dev, bit, &ret)) - return 0; - - return ret; -} - -static void ds9490r_write_bit(void *data, u8 bit) -{ - struct ds_device *dev = data; - - ds_write_bit(dev, bit); -} - -static void ds9490r_write_byte(void *data, u8 byte) -{ - struct ds_device *dev = data; - - ds_write_byte(dev, byte); -} - -static u8 ds9490r_read_bit(void *data) -{ - struct ds_device *dev = data; - int err; - u8 bit = 0; - - err = ds_touch_bit(dev, 1, &bit); - if (err) - return 0; - //err = ds_read_bit(dev, &bit); - //if (err) - // return 0; - - return bit & 1; -} - -static u8 ds9490r_read_byte(void *data) -{ - struct ds_device *dev = data; - int err; - u8 byte = 0; - - err = ds_read_byte(dev, &byte); - if (err) - return 0; - - return byte; -} - -static void ds9490r_write_block(void *data, const u8 *buf, int len) -{ - struct ds_device *dev = data; - - ds_write_block(dev, (u8 *)buf, len); -} - -static u8 ds9490r_read_block(void *data, u8 *buf, int len) -{ - struct ds_device *dev = data; - int err; - - err = ds_read_block(dev, buf, len); - if (err < 0) - return 0; - - return len; -} - -static u8 ds9490r_reset(void *data) -{ - struct ds_device *dev = data; - struct ds_status st; - int err; - - memset(&st, 0, sizeof(st)); - - err = ds_reset(dev, &st); - if (err) - return 1; - - return 0; -} - -static int __devinit ds_w1_init(void) -{ - int err; - - ds_bus_master = kmalloc(sizeof(*ds_bus_master), GFP_KERNEL); - if (!ds_bus_master) { - printk(KERN_ERR "Failed to allocate DS9490R USB<->W1 bus_master structure.\n"); - return -ENOMEM; - } - - ds_dev = ds_get_device(); - if (!ds_dev) { - printk(KERN_ERR "DS9490R is not registered.\n"); - err = -ENODEV; - goto err_out_free_bus_master; - } - - memset(ds_bus_master, 0, sizeof(*ds_bus_master)); - - ds_bus_master->data = ds_dev; - ds_bus_master->touch_bit = &ds9490r_touch_bit; - ds_bus_master->read_bit = &ds9490r_read_bit; - ds_bus_master->write_bit = &ds9490r_write_bit; - ds_bus_master->read_byte = &ds9490r_read_byte; - ds_bus_master->write_byte = &ds9490r_write_byte; - ds_bus_master->read_block = &ds9490r_read_block; - ds_bus_master->write_block = &ds9490r_write_block; - ds_bus_master->reset_bus = &ds9490r_reset; - - err = w1_add_master_device(ds_bus_master); - if (err) - goto err_out_put_device; - - return 0; - -err_out_put_device: - ds_put_device(ds_dev); -err_out_free_bus_master: - kfree(ds_bus_master); - - return err; -} - -static void __devexit ds_w1_fini(void) -{ - w1_remove_master_device(ds_bus_master); - ds_put_device(ds_dev); - kfree(ds_bus_master); -} - -module_init(ds_w1_init); -module_exit(ds_w1_fini); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); diff --git a/drivers/w1/masters/dscore.c b/drivers/w1/masters/dscore.c deleted file mode 100644 index 2cf7776a7080..000000000000 --- a/drivers/w1/masters/dscore.c +++ /dev/null @@ -1,795 +0,0 @@ -/* - * dscore.c - * - * Copyright (c) 2004 Evgeniy Polyakov - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include "dscore.h" - -static struct usb_device_id ds_id_table [] = { - { USB_DEVICE(0x04fa, 0x2490) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, ds_id_table); - -static int ds_probe(struct usb_interface *, const struct usb_device_id *); -static void ds_disconnect(struct usb_interface *); - -int ds_touch_bit(struct ds_device *, u8, u8 *); -int ds_read_byte(struct ds_device *, u8 *); -int ds_read_bit(struct ds_device *, u8 *); -int ds_write_byte(struct ds_device *, u8); -int ds_write_bit(struct ds_device *, u8); -static int ds_start_pulse(struct ds_device *, int); -int ds_reset(struct ds_device *, struct ds_status *); -struct ds_device * ds_get_device(void); -void ds_put_device(struct ds_device *); - -static inline void ds_dump_status(unsigned char *, unsigned char *, int); -static int ds_send_control(struct ds_device *, u16, u16); -static int ds_send_control_mode(struct ds_device *, u16, u16); -static int ds_send_control_cmd(struct ds_device *, u16, u16); - - -static struct usb_driver ds_driver = { - .name = "DS9490R", - .probe = ds_probe, - .disconnect = ds_disconnect, - .id_table = ds_id_table, -}; - -static struct ds_device *ds_dev; - -struct ds_device * ds_get_device(void) -{ - if (ds_dev) - atomic_inc(&ds_dev->refcnt); - return ds_dev; -} - -void ds_put_device(struct ds_device *dev) -{ - atomic_dec(&dev->refcnt); -} - -static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index) -{ - int err; - - err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), - CONTROL_CMD, 0x40, value, index, NULL, 0, 1000); - if (err < 0) { - printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n", - value, index, err); - return err; - } - - return err; -} - -static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index) -{ - int err; - - err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), - MODE_CMD, 0x40, value, index, NULL, 0, 1000); - if (err < 0) { - printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n", - value, index, err); - return err; - } - - return err; -} - -static int ds_send_control(struct ds_device *dev, u16 value, u16 index) -{ - int err; - - err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), - COMM_CMD, 0x40, value, index, NULL, 0, 1000); - if (err < 0) { - printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n", - value, index, err); - return err; - } - - return err; -} - -static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off) -{ - printk("%45s: %8x\n", str, buf[off]); -} - -static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, - unsigned char *buf, int size) -{ - int count, err; - - memset(st, 0, sizeof(st)); - - count = 0; - err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100); - if (err < 0) { - printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err); - return err; - } - - if (count >= sizeof(*st)) - memcpy(st, buf, sizeof(*st)); - - return count; -} - -static int ds_recv_status(struct ds_device *dev, struct ds_status *st) -{ - unsigned char buf[64]; - int count, err = 0, i; - - memcpy(st, buf, sizeof(*st)); - - count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); - if (count < 0) - return err; - - printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count); - for (i=0; i= 16) { - ds_dump_status(buf, "enable flag", 0); - ds_dump_status(buf, "1-wire speed", 1); - ds_dump_status(buf, "strong pullup duration", 2); - ds_dump_status(buf, "programming pulse duration", 3); - ds_dump_status(buf, "pulldown slew rate control", 4); - ds_dump_status(buf, "write-1 low time", 5); - ds_dump_status(buf, "data sample offset/write-0 recovery time", 6); - ds_dump_status(buf, "reserved (test register)", 7); - ds_dump_status(buf, "device status flags", 8); - ds_dump_status(buf, "communication command byte 1", 9); - ds_dump_status(buf, "communication command byte 2", 10); - ds_dump_status(buf, "communication command buffer status", 11); - ds_dump_status(buf, "1-wire data output buffer status", 12); - ds_dump_status(buf, "1-wire data input buffer status", 13); - ds_dump_status(buf, "reserved", 14); - ds_dump_status(buf, "reserved", 15); - } - - memcpy(st, buf, sizeof(*st)); - - if (st->status & ST_EPOF) { - printk(KERN_INFO "Resetting device after ST_EPOF.\n"); - err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); - if (err) - return err; - count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); - if (count < 0) - return err; - } -#if 0 - if (st->status & ST_IDLE) { - printk(KERN_INFO "Resetting pulse after ST_IDLE.\n"); - err = ds_start_pulse(dev, PULLUP_PULSE_DURATION); - if (err) - return err; - } -#endif - - return err; -} - -static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size) -{ - int count, err; - struct ds_status st; - - count = 0; - err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]), - buf, size, &count, 1000); - if (err < 0) { - printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]); - usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN])); - ds_recv_status(dev, &st); - return err; - } - -#if 0 - { - int i; - - printk("%s: count=%d: ", __func__, count); - for (i=0; iudev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000); - if (err < 0) { - printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err); - return err; - } - - return err; -} - -#if 0 - -int ds_stop_pulse(struct ds_device *dev, int limit) -{ - struct ds_status st; - int count = 0, err = 0; - u8 buf[0x20]; - - do { - err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0); - if (err) - break; - err = ds_send_control(dev, CTL_RESUME_EXE, 0); - if (err) - break; - err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); - if (err) - break; - - if ((st.status & ST_SPUA) == 0) { - err = ds_send_control_mode(dev, MOD_PULSE_EN, 0); - if (err) - break; - } - } while(++count < limit); - - return err; -} - -int ds_detect(struct ds_device *dev, struct ds_status *st) -{ - int err; - - err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); - if (err) - return err; - - err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0); - if (err) - return err; - - err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40); - if (err) - return err; - - err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG); - if (err) - return err; - - err = ds_recv_status(dev, st); - - return err; -} - -#endif /* 0 */ - -static int ds_wait_status(struct ds_device *dev, struct ds_status *st) -{ - u8 buf[0x20]; - int err, count = 0; - - do { - err = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); -#if 0 - if (err >= 0) { - int i; - printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); - for (i=0; i 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) { - ds_recv_status(dev, st); - return -1; - } else - return 0; -} - -int ds_reset(struct ds_device *dev, struct ds_status *st) -{ - int err; - - //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE); - err = ds_send_control(dev, 0x43, SPEED_NORMAL); - if (err) - return err; - - ds_wait_status(dev, st); -#if 0 - if (st->command_buffer_status) { - printk(KERN_INFO "Short circuit.\n"); - return -EIO; - } -#endif - - return 0; -} - -#if 0 -int ds_set_speed(struct ds_device *dev, int speed) -{ - int err; - - if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE) - return -EINVAL; - - if (speed != SPEED_OVERDRIVE) - speed = SPEED_FLEXIBLE; - - speed &= 0xff; - - err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed); - if (err) - return err; - - return err; -} -#endif /* 0 */ - -static int ds_start_pulse(struct ds_device *dev, int delay) -{ - int err; - u8 del = 1 + (u8)(delay >> 4); - struct ds_status st; - -#if 0 - err = ds_stop_pulse(dev, 10); - if (err) - return err; - - err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); - if (err) - return err; -#endif - err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del); - if (err) - return err; - - err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0); - if (err) - return err; - - mdelay(delay); - - ds_wait_status(dev, &st); - - return err; -} - -int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit) -{ - int err, count; - struct ds_status st; - u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0); - u16 cmd; - - err = ds_send_control(dev, value, 0); - if (err) - return err; - - count = 0; - do { - err = ds_wait_status(dev, &st); - if (err) - return err; - - cmd = st.command0 | (st.command1 << 8); - } while (cmd != value && ++count < 10); - - if (err < 0 || count >= 10) { - printk(KERN_ERR "Failed to obtain status.\n"); - return -EINVAL; - } - - err = ds_recv_data(dev, tbit, sizeof(*tbit)); - if (err < 0) - return err; - - return 0; -} - -int ds_write_bit(struct ds_device *dev, u8 bit) -{ - int err; - struct ds_status st; - - err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0); - if (err) - return err; - - ds_wait_status(dev, &st); - - return 0; -} - -int ds_write_byte(struct ds_device *dev, u8 byte) -{ - int err; - struct ds_status st; - u8 rbyte; - - err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte); - if (err) - return err; - - err = ds_wait_status(dev, &st); - if (err) - return err; - - err = ds_recv_data(dev, &rbyte, sizeof(rbyte)); - if (err < 0) - return err; - - ds_start_pulse(dev, PULLUP_PULSE_DURATION); - - return !(byte == rbyte); -} - -int ds_read_bit(struct ds_device *dev, u8 *bit) -{ - int err; - - err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); - if (err) - return err; - - err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0); - if (err) - return err; - - err = ds_recv_data(dev, bit, sizeof(*bit)); - if (err < 0) - return err; - - return 0; -} - -int ds_read_byte(struct ds_device *dev, u8 *byte) -{ - int err; - struct ds_status st; - - err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff); - if (err) - return err; - - ds_wait_status(dev, &st); - - err = ds_recv_data(dev, byte, sizeof(*byte)); - if (err < 0) - return err; - - return 0; -} - -int ds_read_block(struct ds_device *dev, u8 *buf, int len) -{ - struct ds_status st; - int err; - - if (len > 64*1024) - return -E2BIG; - - memset(buf, 0xFF, len); - - err = ds_send_data(dev, buf, len); - if (err < 0) - return err; - - err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); - if (err) - return err; - - ds_wait_status(dev, &st); - - memset(buf, 0x00, len); - err = ds_recv_data(dev, buf, len); - - return err; -} - -int ds_write_block(struct ds_device *dev, u8 *buf, int len) -{ - int err; - struct ds_status st; - - err = ds_send_data(dev, buf, len); - if (err < 0) - return err; - - ds_wait_status(dev, &st); - - err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); - if (err) - return err; - - ds_wait_status(dev, &st); - - err = ds_recv_data(dev, buf, len); - if (err < 0) - return err; - - ds_start_pulse(dev, PULLUP_PULSE_DURATION); - - return !(err == len); -} - -#if 0 - -int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search) -{ - int err; - u16 value, index; - struct ds_status st; - - memset(buf, 0, sizeof(buf)); - - err = ds_send_data(ds_dev, (unsigned char *)&init, 8); - if (err) - return err; - - ds_wait_status(ds_dev, &st); - - value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS; - index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8); - err = ds_send_control(ds_dev, value, index); - if (err) - return err; - - ds_wait_status(ds_dev, &st); - - err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number); - if (err < 0) - return err; - - return err/8; -} - -int ds_match_access(struct ds_device *dev, u64 init) -{ - int err; - struct ds_status st; - - err = ds_send_data(dev, (unsigned char *)&init, sizeof(init)); - if (err) - return err; - - ds_wait_status(dev, &st); - - err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055); - if (err) - return err; - - ds_wait_status(dev, &st); - - return 0; -} - -int ds_set_path(struct ds_device *dev, u64 init) -{ - int err; - struct ds_status st; - u8 buf[9]; - - memcpy(buf, &init, 8); - buf[8] = BRANCH_MAIN; - - err = ds_send_data(dev, buf, sizeof(buf)); - if (err) - return err; - - ds_wait_status(dev, &st); - - err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0); - if (err) - return err; - - ds_wait_status(dev, &st); - - return 0; -} - -#endif /* 0 */ - -static int ds_probe(struct usb_interface *intf, - const struct usb_device_id *udev_id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct usb_host_interface *iface_desc; - int i, err; - - ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL); - if (!ds_dev) { - printk(KERN_INFO "Failed to allocate new DS9490R structure.\n"); - return -ENOMEM; - } - - ds_dev->udev = usb_get_dev(udev); - usb_set_intfdata(intf, ds_dev); - - err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3); - if (err) { - printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n", - intf->altsetting[0].desc.bInterfaceNumber, err); - return err; - } - - err = usb_reset_configuration(ds_dev->udev); - if (err) { - printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err); - return err; - } - - iface_desc = &intf->altsetting[0]; - if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { - printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints); - return -ENODEV; - } - - atomic_set(&ds_dev->refcnt, 0); - memset(ds_dev->ep, 0, sizeof(ds_dev->ep)); - - /* - * This loop doesn'd show control 0 endpoint, - * so we will fill only 1-3 endpoints entry. - */ - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - ds_dev->ep[i+1] = endpoint->bEndpointAddress; - - printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", - i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize), - (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT", - endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); - } - -#if 0 - { - int err, i; - u64 buf[3]; - u64 init=0xb30000002078ee81ull; - struct ds_status st; - - ds_reset(ds_dev, &st); - err = ds_search(ds_dev, init, buf, 3, 0); - if (err < 0) - return err; - for (i=0; irefcnt)) { - printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n", - atomic_read(&dev->refcnt)); - - if (msleep_interruptible(1000)) - flush_signals(current); - } - - usb_put_dev(dev->udev); - kfree(dev); - ds_dev = NULL; -} - -static int ds_init(void) -{ - int err; - - err = usb_register(&ds_driver); - if (err) { - printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err); - return err; - } - - return 0; -} - -static void ds_fini(void) -{ - usb_deregister(&ds_driver); -} - -module_init(ds_init); -module_exit(ds_fini); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); - -EXPORT_SYMBOL(ds_touch_bit); -EXPORT_SYMBOL(ds_read_byte); -EXPORT_SYMBOL(ds_read_bit); -EXPORT_SYMBOL(ds_read_block); -EXPORT_SYMBOL(ds_write_byte); -EXPORT_SYMBOL(ds_write_bit); -EXPORT_SYMBOL(ds_write_block); -EXPORT_SYMBOL(ds_reset); -EXPORT_SYMBOL(ds_get_device); -EXPORT_SYMBOL(ds_put_device); - -/* - * This functions can be used for EEPROM programming, - * when driver will be included into mainline this will - * require uncommenting. - */ -#if 0 -EXPORT_SYMBOL(ds_start_pulse); -EXPORT_SYMBOL(ds_set_speed); -EXPORT_SYMBOL(ds_detect); -EXPORT_SYMBOL(ds_stop_pulse); -EXPORT_SYMBOL(ds_search); -#endif diff --git a/drivers/w1/masters/dscore.h b/drivers/w1/masters/dscore.h deleted file mode 100644 index 6cf5671d6ebe..000000000000 --- a/drivers/w1/masters/dscore.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * dscore.h - * - * Copyright (c) 2004 Evgeniy Polyakov - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __DSCORE_H -#define __DSCORE_H - -#include -#include - -/* COMMAND TYPE CODES */ -#define CONTROL_CMD 0x00 -#define COMM_CMD 0x01 -#define MODE_CMD 0x02 - -/* CONTROL COMMAND CODES */ -#define CTL_RESET_DEVICE 0x0000 -#define CTL_START_EXE 0x0001 -#define CTL_RESUME_EXE 0x0002 -#define CTL_HALT_EXE_IDLE 0x0003 -#define CTL_HALT_EXE_DONE 0x0004 -#define CTL_FLUSH_COMM_CMDS 0x0007 -#define CTL_FLUSH_RCV_BUFFER 0x0008 -#define CTL_FLUSH_XMT_BUFFER 0x0009 -#define CTL_GET_COMM_CMDS 0x000A - -/* MODE COMMAND CODES */ -#define MOD_PULSE_EN 0x0000 -#define MOD_SPEED_CHANGE_EN 0x0001 -#define MOD_1WIRE_SPEED 0x0002 -#define MOD_STRONG_PU_DURATION 0x0003 -#define MOD_PULLDOWN_SLEWRATE 0x0004 -#define MOD_PROG_PULSE_DURATION 0x0005 -#define MOD_WRITE1_LOWTIME 0x0006 -#define MOD_DSOW0_TREC 0x0007 - -/* COMMUNICATION COMMAND CODES */ -#define COMM_ERROR_ESCAPE 0x0601 -#define COMM_SET_DURATION 0x0012 -#define COMM_BIT_IO 0x0020 -#define COMM_PULSE 0x0030 -#define COMM_1_WIRE_RESET 0x0042 -#define COMM_BYTE_IO 0x0052 -#define COMM_MATCH_ACCESS 0x0064 -#define COMM_BLOCK_IO 0x0074 -#define COMM_READ_STRAIGHT 0x0080 -#define COMM_DO_RELEASE 0x6092 -#define COMM_SET_PATH 0x00A2 -#define COMM_WRITE_SRAM_PAGE 0x00B2 -#define COMM_WRITE_EPROM 0x00C4 -#define COMM_READ_CRC_PROT_PAGE 0x00D4 -#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4 -#define COMM_SEARCH_ACCESS 0x00F4 - -/* Communication command bits */ -#define COMM_TYPE 0x0008 -#define COMM_SE 0x0008 -#define COMM_D 0x0008 -#define COMM_Z 0x0008 -#define COMM_CH 0x0008 -#define COMM_SM 0x0008 -#define COMM_R 0x0008 -#define COMM_IM 0x0001 - -#define COMM_PS 0x4000 -#define COMM_PST 0x4000 -#define COMM_CIB 0x4000 -#define COMM_RTS 0x4000 -#define COMM_DT 0x2000 -#define COMM_SPU 0x1000 -#define COMM_F 0x0800 -#define COMM_NTP 0x0400 -#define COMM_ICP 0x0200 -#define COMM_RST 0x0100 - -#define PULSE_PROG 0x01 -#define PULSE_SPUE 0x02 - -#define BRANCH_MAIN 0xCC -#define BRANCH_AUX 0x33 - -/* - * Duration of the strong pull-up pulse in milliseconds. - */ -#define PULLUP_PULSE_DURATION 750 - -/* Status flags */ -#define ST_SPUA 0x01 /* Strong Pull-up is active */ -#define ST_PRGA 0x02 /* 12V programming pulse is being generated */ -#define ST_12VP 0x04 /* external 12V programming voltage is present */ -#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */ -#define ST_HALT 0x10 /* DS2490 is currently halted */ -#define ST_IDLE 0x20 /* DS2490 is currently idle */ -#define ST_EPOF 0x80 - -#define SPEED_NORMAL 0x00 -#define SPEED_FLEXIBLE 0x01 -#define SPEED_OVERDRIVE 0x02 - -#define NUM_EP 4 -#define EP_CONTROL 0 -#define EP_STATUS 1 -#define EP_DATA_OUT 2 -#define EP_DATA_IN 3 - -struct ds_device -{ - struct usb_device *udev; - struct usb_interface *intf; - - int ep[NUM_EP]; - - atomic_t refcnt; -}; - -struct ds_status -{ - u8 enable; - u8 speed; - u8 pullup_dur; - u8 ppuls_dur; - u8 pulldown_slew; - u8 write1_time; - u8 write0_time; - u8 reserved0; - u8 status; - u8 command0; - u8 command1; - u8 command_buffer_status; - u8 data_out_buffer_status; - u8 data_in_buffer_status; - u8 reserved1; - u8 reserved2; - -}; - -int ds_touch_bit(struct ds_device *, u8, u8 *); -int ds_read_byte(struct ds_device *, u8 *); -int ds_read_bit(struct ds_device *, u8 *); -int ds_write_byte(struct ds_device *, u8); -int ds_write_bit(struct ds_device *, u8); -int ds_reset(struct ds_device *, struct ds_status *); -struct ds_device * ds_get_device(void); -void ds_put_device(struct ds_device *); -int ds_write_block(struct ds_device *, u8 *, int); -int ds_read_block(struct ds_device *, u8 *, int); - -#endif /* __DSCORE_H */ - -- cgit v1.2.3