From 9f3e13c74e1b4f370c3de06cb504c003091c9673 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Wed, 20 Sep 2017 15:00:17 +0930 Subject: watchdog: aspeed: Retain watchdog enabled state An unintended post-condition of probe() is that the watchdog is disabled. This behaviour was introduced by an unnecessary write to the control register to configure the hardware based on the devicetree. The write is unnecessary because the cached control value that is manipulated by the code parsing the devicetree is eventually written by aspeed_wdt_enable(), which is when we care how the control register should be configured. Remove the write to restore expected behaviour. Fixes: b7f0b8ad25f3 ("drivers/watchdog: ASPEED reference dev tree properties for config") Signed-off-by: Andrew Jeffery Reviewed-by: Joel Stanley Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/aspeed_wdt.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/watchdog') diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c index 79cc766cd30f..6c6dd3f4c48d 100644 --- a/drivers/watchdog/aspeed_wdt.c +++ b/drivers/watchdog/aspeed_wdt.c @@ -243,9 +243,13 @@ static int aspeed_wdt_probe(struct platform_device *pdev) if (of_property_read_bool(np, "aspeed,external-signal")) wdt->ctrl |= WDT_CTRL_WDT_EXT; - writel(wdt->ctrl, wdt->base + WDT_CTRL); - if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) { + /* + * The watchdog is running, but invoke aspeed_wdt_start() to + * write wdt->ctrl to WDT_CTRL to ensure the watchdog's + * configuration conforms to the driver's expectations. + * Primarily, ensure we're using the 1MHz clock source. + */ aspeed_wdt_start(&wdt->wdd); set_bit(WDOG_HW_RUNNING, &wdt->wdd.status); } -- cgit v1.2.3