From 8bf62ecee58360749c5f0e68bc97d5e02a6816b1 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 12 May 2005 15:29:42 -0400 Subject: [libata] C/H/S support, for older devices --- drivers/scsi/libata-core.c | 140 +++++++++++++++++++---- drivers/scsi/libata-scsi.c | 280 ++++++++++++++++++++++++++++----------------- 2 files changed, 292 insertions(+), 128 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0b5d3a5b7eda..96355b05fe5c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -52,6 +52,7 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); @@ -1008,7 +1009,7 @@ static inline void ata_dump_id(struct ata_device *dev) static void ata_dev_identify(struct ata_port *ap, unsigned int device) { struct ata_device *dev = &ap->device[device]; - unsigned int i; + unsigned int major_version; u16 tmp; unsigned long xfer_modes; u8 status; @@ -1106,9 +1107,9 @@ retry: * common ATA, ATAPI feature tests */ - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) { - printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id); + /* we require DMA support (bits 8 of word 49) */ + if (!ata_id_has_dma(dev->id)) { + printk(KERN_DEBUG "ata%u: no dma\n", ap->id); goto err_out_nosup; } @@ -1128,32 +1129,69 @@ retry: if (!ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; + /* get major version */ tmp = dev->id[ATA_ID_MAJOR_VER]; - for (i = 14; i >= 1; i--) - if (tmp & (1 << i)) + for (major_version = 14; major_version >= 1; major_version--) + if (tmp & (1 << major_version)) break; - /* we require at least ATA-3 */ - if (i < 3) { - printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id); - goto err_out_nosup; - } + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (major_version < 4 || (!ata_id_has_lba(dev->id))) + ata_dev_init_params(ap, dev); + + if (ata_id_has_lba(dev->id)) { + dev->flags |= ATA_DFLAG_LBA; + + if (ata_id_has_lba48(dev->id)) { + dev->flags |= ATA_DFLAG_LBA48; + dev->n_sectors = ata_id_u64(dev->id, 100); + } else { + dev->n_sectors = ata_id_u32(dev->id, 60); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = dev->id[1]; + dev->heads = dev->id[3]; + dev->sectors = dev->id[6]; + dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + + if (ata_id_current_chs_valid(dev->id)) { + /* Current CHS translation is valid. */ + dev->cylinders = dev->id[54]; + dev->heads = dev->id[55]; + dev->sectors = dev->id[56]; + + dev->n_sectors = ata_id_u32(dev->id, 57); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); - if (ata_id_has_lba48(dev->id)) { - dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); } ap->host->max_cmd_len = 16; - - /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n", - ap->id, device, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " lba48" : ""); } /* ATAPI-specific feature tests */ @@ -1946,6 +1984,54 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) DPRINTK("EXIT\n"); } +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @ap: Port associated with device @dev + * @dev: Device to which command will be sent + * + * LOCKING: + */ + +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + int rc; + unsigned long flags; + u16 sectors = dev->id[6]; + u16 heads = dev->id[3]; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + qc->tf.command = ATA_CMD_INIT_DEV_PARAMS; + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_NODATA; + qc->tf.nsect = sectors; + qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + /** * ata_sg_clean - * @qc: @@ -2736,8 +2822,12 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, ata_tf_init(ap, &qc->tf, dev->devno); - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; + if (dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) + qc->tf.flags |= ATA_TFLAG_LBA48; + } } return qc; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3b..8b065ef0e39a 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -435,77 +435,107 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 sect = 0; - u32 n_sect = 0; + u64 block = 0; + u32 n_block = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - tf->device |= ATA_LBA; if (scsicmd[0] == VERIFY) { - sect |= ((u64)scsicmd[2]) << 24; - sect |= ((u64)scsicmd[3]) << 16; - sect |= ((u64)scsicmd[4]) << 8; - sect |= ((u64)scsicmd[5]); + block |= ((u64)scsicmd[2]) << 24; + block |= ((u64)scsicmd[3]) << 16; + block |= ((u64)scsicmd[4]) << 8; + block |= ((u64)scsicmd[5]); - n_sect |= ((u32)scsicmd[7]) << 8; - n_sect |= ((u32)scsicmd[8]); + n_block |= ((u32)scsicmd[7]) << 8; + n_block |= ((u32)scsicmd[8]); } else if (scsicmd[0] == VERIFY_16) { - sect |= ((u64)scsicmd[2]) << 56; - sect |= ((u64)scsicmd[3]) << 48; - sect |= ((u64)scsicmd[4]) << 40; - sect |= ((u64)scsicmd[5]) << 32; - sect |= ((u64)scsicmd[6]) << 24; - sect |= ((u64)scsicmd[7]) << 16; - sect |= ((u64)scsicmd[8]) << 8; - sect |= ((u64)scsicmd[9]); - - n_sect |= ((u32)scsicmd[10]) << 24; - n_sect |= ((u32)scsicmd[11]) << 16; - n_sect |= ((u32)scsicmd[12]) << 8; - n_sect |= ((u32)scsicmd[13]); + block |= ((u64)scsicmd[2]) << 56; + block |= ((u64)scsicmd[3]) << 48; + block |= ((u64)scsicmd[4]) << 40; + block |= ((u64)scsicmd[5]) << 32; + block |= ((u64)scsicmd[6]) << 24; + block |= ((u64)scsicmd[7]) << 16; + block |= ((u64)scsicmd[8]) << 8; + block |= ((u64)scsicmd[9]); + + n_block |= ((u32)scsicmd[10]) << 24; + n_block |= ((u32)scsicmd[11]) << 16; + n_block |= ((u32)scsicmd[12]) << 8; + n_block |= ((u32)scsicmd[13]); } else return 1; - if (!n_sect) + if (!n_block) return 1; - if (sect >= dev_sectors) + if (block >= dev_sectors) return 1; - if ((sect + n_sect) > dev_sectors) + if ((block + n_block) > dev_sectors) return 1; if (lba48) { - if (n_sect > (64 * 1024)) + if (n_block > (64 * 1024)) return 1; } else { - if (n_sect > 256) + if (n_block > 256) return 1; } - if (lba48) { - tf->command = ATA_CMD_VERIFY_EXT; + if (lba) { + if (lba48) { + tf->command = ATA_CMD_VERIFY_EXT; - tf->hob_nsect = (n_sect >> 8) & 0xff; + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->hob_lbah = (sect >> 40) & 0xff; - tf->hob_lbam = (sect >> 32) & 0xff; - tf->hob_lbal = (sect >> 24) & 0xff; - } else { - tf->command = ATA_CMD_VERIFY; + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + tf->command = ATA_CMD_VERIFY; - tf->device |= (sect >> 24) & 0xf; - } + tf->device |= (block >> 24) & 0xf; + } + + tf->nsect = n_block & 0xff; - tf->nsect = n_sect & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; - tf->lbah = (sect >> 16) & 0xff; - tf->lbam = (sect >> 8) & 0xff; - tf->lbal = sect & 0xff; + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return 1; + + tf->command = ATA_CMD_VERIFY; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } return 0; } @@ -533,11 +563,14 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; + u64 block = 0; + u32 n_block = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; - tf->device |= ATA_LBA; if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || scsicmd[0] == READ_16) { @@ -547,80 +580,111 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_WRITE; } + /* Calculate the SCSI LBA and transfer length. */ if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - if (lba48) { - tf->hob_nsect = scsicmd[7]; - tf->hob_lbal = scsicmd[2]; - - qc->nsect = ((unsigned int)scsicmd[7] << 8) | - scsicmd[8]; - } else { - /* if we don't support LBA48 addressing, the request - * -may- be too large. */ - if ((scsicmd[2] & 0xf0) || scsicmd[7]) - return 1; - - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[2]; + block |= ((u64)scsicmd[2]) << 24; + block |= ((u64)scsicmd[3]) << 16; + block |= ((u64)scsicmd[4]) << 8; + block |= ((u64)scsicmd[5]); - qc->nsect = scsicmd[8]; - } - - tf->nsect = scsicmd[8]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[4]; - tf->lbah = scsicmd[3]; + n_block |= ((u32)scsicmd[7]) << 8; + n_block |= ((u32)scsicmd[8]); VPRINTK("ten-byte command\n"); - return 0; - } - - if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - qc->nsect = tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[3]; - tf->lbam = scsicmd[2]; - tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ - + } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { + block |= ((u64)scsicmd[2]) << 8; + block |= ((u64)scsicmd[3]); + n_block |= ((u32)scsicmd[4]); + VPRINTK("six-byte command\n"); - return 0; + } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { + block |= ((u64)scsicmd[2]) << 56; + block |= ((u64)scsicmd[3]) << 48; + block |= ((u64)scsicmd[4]) << 40; + block |= ((u64)scsicmd[5]) << 32; + block |= ((u64)scsicmd[6]) << 24; + block |= ((u64)scsicmd[7]) << 16; + block |= ((u64)scsicmd[8]) << 8; + block |= ((u64)scsicmd[9]); + + n_block |= ((u32)scsicmd[10]) << 24; + n_block |= ((u32)scsicmd[11]) << 16; + n_block |= ((u32)scsicmd[12]) << 8; + n_block |= ((u32)scsicmd[13]); + + VPRINTK("sixteen-byte command\n"); + } else { + DPRINTK("no-byte command\n"); + return 1; } - if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - /* rule out impossible LBAs and sector counts */ - if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11]) - return 1; + /* Check and compose ATA command */ + if (!n_block) + /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */ + return 1; + if (lba) { if (lba48) { - tf->hob_nsect = scsicmd[12]; - tf->hob_lbal = scsicmd[6]; - tf->hob_lbam = scsicmd[5]; - tf->hob_lbah = scsicmd[4]; - - qc->nsect = ((unsigned int)scsicmd[12] << 8) | - scsicmd[13]; - } else { - /* once again, filter out impossible non-zero values */ - if (scsicmd[4] || scsicmd[5] || scsicmd[12] || - (scsicmd[6] & 0xf0)) + /* The request -may- be too large for LBA48. */ + if ((block >> 48) || (n_block > 65536)) return 1; - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[6]; + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + /* LBA28 */ + + /* The request -may- be too large for LBA28. */ + if ((block >> 28) || (n_block > 256)) + return 1; - qc->nsect = scsicmd[13]; + tf->device |= (block >> 24) & 0xf; } + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; - tf->nsect = scsicmd[13]; - tf->lbal = scsicmd[9]; - tf->lbam = scsicmd[8]; - tf->lbah = scsicmd[7]; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; - VPRINTK("sixteen-byte command\n"); - return 0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if ((block >> 28) || (n_block > 256)) + return 1; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return 1; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; } - DPRINTK("no-byte command\n"); - return 1; + return 0; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -1167,10 +1231,20 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, VPRINTK("ENTER\n"); - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + n_sectors--; /* ATA TotalUserSectors - 1 */ tmp = n_sectors; /* note: truncates, if lba48 */ -- cgit v1.2.3 From b095518ef51c37658c58367bd19240b8a113f25c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 12 May 2005 15:45:22 -0400 Subject: [libata] ATA passthru (arbitrary ATA command execution) Authors: Brett Russ John W. Linville Andy Warner --- drivers/scsi/libata-scsi.c | 651 +++++++++++++++++++++++++++++++++++++-------- drivers/scsi/libata.h | 3 +- include/scsi/scsi.h | 3 + 3 files changed, 552 insertions(+), 105 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3b..22c77a113536 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -29,10 +29,13 @@ #include "scsi.h" #include #include +#include #include #include "libata.h" +#define SECTOR_SIZE 512 + typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); @@ -67,6 +70,148 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, return 0; } +/** + * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl + * @dev: Device to whom we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ + +int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[4], *argbuf = NULL; + int argsize = 0; + struct scsi_request *sreq; + + if (NULL == (void *)arg) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + sreq = scsi_allocate_request(scsidev, GFP_KERNEL); + if (!sreq) + return -EINTR; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + + if (args[3]) { + argsize = SECTOR_SIZE * args[3]; + argbuf = kmalloc(argsize, GFP_KERNEL); + if (argbuf == NULL) + return -ENOMEM; + + scsi_cmd[1] = (4 << 1); /* PIO Data-in */ + scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, + block count in sector count field */ + sreq->sr_data_direction = DMA_FROM_DEVICE; + } else { + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + sreq->sr_data_direction = DMA_NONE; + } + + scsi_cmd[0] = ATA_16; + + scsi_cmd[4] = args[2]; + if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ + scsi_cmd[6] = args[3]; + scsi_cmd[8] = args[1]; + scsi_cmd[10] = 0x4f; + scsi_cmd[12] = 0xc2; + } else { + scsi_cmd[6] = args[1]; + } + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5); + + if (sreq->sr_result) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + + if ((argbuf) + && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize)) + rc = -EFAULT; +error: + scsi_release_request(sreq); + + if (argbuf) + kfree(argbuf); + + return rc; +} + +/** + * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl + * @dev: Device to whom we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[7]; + struct scsi_request *sreq; + + if (NULL == (void *)arg) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + scsi_cmd[0] = ATA_16; + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + scsi_cmd[4] = args[1]; + scsi_cmd[6] = args[2]; + scsi_cmd[8] = args[3]; + scsi_cmd[10] = args[4]; + scsi_cmd[12] = args[5]; + scsi_cmd[14] = args[0]; + + sreq = scsi_allocate_request(scsidev, GFP_KERNEL); + if (!sreq) { + rc = -EINTR; + goto error; + } + + sreq->sr_data_direction = DMA_NONE; + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5); + + if (sreq->sr_result) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + +error: + scsi_release_request(sreq); + return rc; +} + int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) { struct ata_port *ap; @@ -96,6 +241,16 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) return -EINVAL; return 0; + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_cmd_ioctl(scsidev, arg); + + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_task_ioctl(scsidev, arg); + default: rc = -ENOTTY; break; @@ -153,25 +308,70 @@ struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, return qc; } +/** + * ata_dump_status - user friendly display of error info + * @id: id of the port in question + * @tf: ptr to filled out taskfile + * + * Decode and dump the ATA error/status registers for the user so + * that they have some idea what really happened at the non + * make-believe layer. + * + * LOCKING: + * inherited from caller + */ +void ata_dump_status(unsigned id, struct ata_taskfile *tf) +{ + u8 stat = tf->command, err = tf->feature; + + printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); + if (stat & ATA_BUSY) { + printk("Busy }\n"); /* Data is not valid in this case */ + } else { + if (stat & 0x40) printk("DriveReady "); + if (stat & 0x20) printk("DeviceFault "); + if (stat & 0x10) printk("SeekComplete "); + if (stat & 0x08) printk("DataRequest "); + if (stat & 0x04) printk("CorrectedError "); + if (stat & 0x02) printk("Index "); + if (stat & 0x01) printk("Error "); + printk("}\n"); + + if (err) { + printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); + if (err & 0x04) printk("DriveStatusError "); + if (err & 0x80) { + if (err & 0x04) printk("BadCRC "); + else printk("Sector "); + } + if (err & 0x40) printk("UncorrectableError "); + if (err & 0x10) printk("SectorIdNotFound "); + if (err & 0x02) printk("TrackZeroNotFound "); + if (err & 0x01) printk("AddrMarkNotFound "); + printk("}\n"); + } + } +} + /** * ata_to_sense_error - convert ATA error to SCSI error - * @qc: Command that we are erroring out * @drv_stat: value contained in ATA status register + * @drv_err: value contained in ATA error register + * @sk: the sense key we'll fill out + * @asc: the additional sense code we'll fill out + * @ascq: the additional sense code qualifier we'll fill out * - * Converts an ATA error into a SCSI error. While we are at it - * we decode and dump the ATA error for the user so that they - * have some idea what really happened at the non make-believe - * layer. + * Converts an ATA error into a SCSI error. Fill out pointers to + * SK, ASC, and ASCQ bytes for later use in fixed or descriptor + * format sense blocks. * * LOCKING: * spin_lock_irqsave(host_set lock) */ - -void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) +void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, + u8 *ascq) { - struct scsi_cmnd *cmd = qc->scsicmd; - u8 err = 0; - unsigned char *sb = cmd->sense_buffer; + int i; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -212,105 +412,183 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; - int i = 0; - - cmd->result = SAM_STAT_CHECK_CONDITION; /* * Is this an error we can process/parse */ - - if(drv_stat & ATA_ERR) - /* Read the err bits */ - err = ata_chk_err(qc->ap); - - /* Display the ATA level error info */ - - printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat); - if(drv_stat & 0x80) - { - printk("Busy "); - err = 0; /* Data is not valid in this case */ + if (drv_stat & ATA_BUSY) { + drv_err = 0; /* Ignore the err bits, they're invalid */ } - else { - if(drv_stat & 0x40) printk("DriveReady "); - if(drv_stat & 0x20) printk("DeviceFault "); - if(drv_stat & 0x10) printk("SeekComplete "); - if(drv_stat & 0x08) printk("DataRequest "); - if(drv_stat & 0x04) printk("CorrectedError "); - if(drv_stat & 0x02) printk("Index "); - if(drv_stat & 0x01) printk("Error "); + + if (drv_err) { + /* Look for drv_err */ + for (i = 0; sense_table[i][0] != 0xFF; i++) { + /* Look for best matches first */ + if ((sense_table[i][0] & drv_err) == + sense_table[i][0]) { + *sk = sense_table[i][1]; + *asc = sense_table[i][2]; + *ascq = sense_table[i][3]; + goto translate_done; + } + } + /* No immediate match */ + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); } - printk("}\n"); - - if(err) - { - printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err); - if(err & 0x04) printk("DriveStatusError "); - if(err & 0x80) - { - if(err & 0x04) - printk("BadCRC "); - else - printk("Sector "); + + /* Fall back to interpreting status bits */ + for (i = 0; stat_table[i][0] != 0xFF; i++) { + if (stat_table[i][0] & drv_stat) { + *sk = stat_table[i][1]; + *asc = stat_table[i][2]; + *ascq = stat_table[i][3]; + goto translate_done; } - if(err & 0x40) printk("UncorrectableError "); - if(err & 0x10) printk("SectorIdNotFound "); - if(err & 0x02) printk("TrackZeroNotFound "); - if(err & 0x01) printk("AddrMarkNotFound "); - printk("}\n"); + } + /* No error? Undecoded? */ + printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", + id, drv_stat); + + /* For our last chance pick, use medium read error because + * it's much more common than an ATA drive telling you a write + * has failed. + */ + *sk = MEDIUM_ERROR; + *asc = 0x11; /* "unrecovered read error" */ + *ascq = 0x04; /* "auto-reallocation failed" */ + + translate_done: + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " + "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err, + *sk, *asc, *ascq); + return; +} + +/* + * ata_gen_ata_desc_sense - Generate check condition sense block. + * @qc: Command that completed. + * + * This function is specific to the ATA descriptor format sense + * block specified for the ATA pass through commands. Regardless + * of whether the command errored or not, return a sense + * block. Copy all controller registers into the sense + * block. Clear sense key, ASC & ASCQ if there is no error. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = SAM_STAT_CHECK_CONDITION; + + /* + * Read the controller registers. + */ + assert(NULL != qc->ap->ops->tf_read); + qc->ap->ops->tf_read(qc->ap, tf); - /* Should we dump sector info here too ?? */ + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3]); + sb[1] &= 0x0f; } + /* + * Sense data is current and format is descriptor. + */ + sb[0] = 0x72; - /* Look for err */ - while(sense_table[i][0] != 0xFF) - { - /* Look for best matches first */ - if((sense_table[i][0] & err) == sense_table[i][0]) - { - sb[0] = 0x70; - sb[2] = sense_table[i][1]; - sb[7] = 0x0a; - sb[12] = sense_table[i][2]; - sb[13] = sense_table[i][3]; - return; - } - i++; + desc[0] = 0x09; + + /* + * Set length of additional sense data. + * Since we only populate descriptor 0, the total + * length is the same (fixed) length as descriptor 0. + */ + desc[1] = sb[7] = 14; + + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->feature; /* == error reg */ + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->command; /* == status reg */ + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; } - /* No immediate match */ - if(err) - printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err); +} - i = 0; - /* Fall back to interpreting status bits */ - while(stat_table[i][0] != 0xFF) - { - if(stat_table[i][0] & drv_stat) - { - sb[0] = 0x70; - sb[2] = stat_table[i][1]; - sb[7] = 0x0a; - sb[12] = stat_table[i][2]; - sb[13] = stat_table[i][3]; - return; - } - i++; +/** + * ata_gen_fixed_sense - generate a SCSI fixed sense block + * @qc: Command that we are erroring out + * + * Leverage ata_to_sense_error() to give us the codes. Fit our + * LBA in here if there's room. + * + * LOCKING: + * inherited from caller + */ +void ata_gen_fixed_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + unsigned char *sb = cmd->sense_buffer; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = SAM_STAT_CHECK_CONDITION; + + /* + * Read the controller registers. + */ + assert(NULL != qc->ap->ops->tf_read); + qc->ap->ops->tf_read(qc->ap, tf); + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[2], &sb[12], &sb[13]); + sb[2] &= 0x0f; } - /* No error ?? */ - printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); - /* additional-sense-code[-qualifier] */ sb[0] = 0x70; - sb[2] = MEDIUM_ERROR; - sb[7] = 0x0A; - if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - sb[12] = 0x11; /* "unrecovered read error" */ - sb[13] = 0x04; - } else { - sb[12] = 0x0C; /* "write error - */ - sb[13] = 0x02; /* auto-reallocation failed" */ + sb[7] = 0x0a; + if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) { + /* A small (28b) LBA will fit in the 32b info field */ + sb[0] |= 0x80; /* set valid bit */ + sb[3] = tf->device & 0x0f; + sb[4] = tf->lbah; + sb[5] = tf->lbam; + sb[6] = tf->lbal; } } @@ -626,11 +904,36 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; + int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ); + + /* For ATA pass thru (SAT) commands, generate a sense block if + * user mandated it or if there's an error. Note that if we + * generate because the user forced us to, a check condition + * is generated and the ATA register values are returned + * whether the command completed successfully or not. If there + * was no error, SK, ASC and ASCQ will all be zero. + */ + if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) && + ((cmd->cmnd[2] & 0x20) || need_sense)) { + ata_gen_ata_desc_sense(qc); + } else { + if (!need_sense) { + cmd->result = SAM_STAT_GOOD; + } else { + /* TODO: decide which descriptor format to use + * for 48b LBA devices and call that here + * instead of the fixed desc, which is only + * good for smaller LBA (and maybe CHS?) + * devices. + */ + ata_gen_fixed_sense(qc); + } + } - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) - ata_to_sense_error(qc, drv_stat); - else - cmd->result = SAM_STAT_GOOD; + if (need_sense) { + /* The ata_gen_..._sense routines fill in tf */ + ata_dump_status(qc->ap->id, &qc->tf); + } qc->scsidone(cmd); @@ -671,8 +974,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, return; /* data is present; dma-map it */ - if (cmd->sc_data_direction == DMA_FROM_DEVICE || - cmd->sc_data_direction == DMA_TO_DEVICE) { + if (cmd->sc_data_direction == SCSI_DATA_READ || + cmd->sc_data_direction == SCSI_DATA_WRITE) { if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); @@ -692,7 +995,6 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (xlat_func(qc, scsicmd)) goto err_out; - /* select device, send command to hardware */ if (ata_qc_issue(qc)) goto err_out; @@ -1304,7 +1606,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == DMA_NONE); + int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ @@ -1316,7 +1618,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == DMA_TO_DEVICE) { + if (cmd->sc_data_direction == SCSI_DATA_WRITE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } @@ -1340,7 +1642,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) #ifdef ATAPI_ENABLE_DMADIR /* some SATA bridges need us to indicate data xfer direction */ - if (cmd->sc_data_direction != DMA_TO_DEVICE) + if (cmd->sc_data_direction != SCSI_DATA_WRITE) qc->tf.feature |= ATAPI_DMADIR; #endif } @@ -1393,6 +1695,143 @@ ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev) return dev; } +/* + * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. + * @byte1: Byte 1 from pass-thru CDB. + * + * RETURNS: + * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. + */ +static u8 +ata_scsi_map_proto(u8 byte1) +{ + switch((byte1 & 0x1e) >> 1) { + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + if (byte1 & 0xe0) { + return ATA_PROT_PIO_MULT; + } + return ATA_PROT_PIO; + + case 10: /* Device Reset */ + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 2: /* Bus Idle */ + case 7: /* Packet */ + case 8: /* DMA Queued */ + case 9: /* Device Diagnostic */ + case 11: /* UDMA Data-in */ + case 12: /* UDMA Data-Out */ + case 13: /* FPDMA */ + default: /* Reserved */ + break; + } + + return ATA_PROT_UNKNOWN; +} + +/** + * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile + * @qc: command structure to be initialized + * @cmd: SCSI command to convert + * + * Handles either 12 or 16-byte versions of the CDB. + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int +ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) +{ + struct ata_taskfile *tf = &(qc->tf); + struct scsi_cmnd *cmd = qc->scsicmd; + + if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + return 1; + + /* + * 12 and 16 byte CDBs use different offsets to + * provide the various register values. + */ + if (scsicmd[0] == ATA_16) { + /* + * 16-byte CDB - may contain extended commands. + * + * If that is the case, copy the upper byte register values. + */ + if (scsicmd[1] & 0x01) { + tf->hob_feature = scsicmd[3]; + tf->hob_nsect = scsicmd[5]; + tf->hob_lbal = scsicmd[7]; + tf->hob_lbam = scsicmd[9]; + tf->hob_lbah = scsicmd[11]; + tf->flags |= ATA_TFLAG_LBA48; + } else + tf->flags &= ~ATA_TFLAG_LBA48; + + /* + * Always copy low byte, device and command registers. + */ + tf->feature = scsicmd[4]; + tf->nsect = scsicmd[6]; + tf->lbal = scsicmd[8]; + tf->lbam = scsicmd[10]; + tf->lbah = scsicmd[12]; + tf->device = scsicmd[13]; + tf->command = scsicmd[14]; + } else { + /* + * 12-byte CDB - incapable of extended commands. + */ + tf->flags &= ~ATA_TFLAG_LBA48; + + tf->feature = scsicmd[3]; + tf->nsect = scsicmd[4]; + tf->lbal = scsicmd[5]; + tf->lbam = scsicmd[6]; + tf->lbah = scsicmd[7]; + tf->device = scsicmd[8]; + tf->command = scsicmd[9]; + } + + /* + * Filter SET_FEATURES - XFER MODE command -- otherwise, + * SET_FEATURES - XFER MODE must be preceded/succeeded + * by an update to hardware-specific registers for each + * controller (i.e. the reason for ->set_piomode(), + * ->set_dmamode(), and ->post_set_mode() hooks). + */ + if ((tf->command == ATA_CMD_SET_FEATURES) + && (tf->feature == SETFEATURES_XFER)) + return 1; + + /* + * Set flags so that all registers will be written, + * and pass on write indication (used for PIO/DMA + * setup.) + */ + tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); + + if (cmd->sc_data_direction == SCSI_DATA_WRITE) + tf->flags |= ATA_TFLAG_WRITE; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + qc->nsect = cmd->bufflen / ATA_SECT_SIZE; + + return 0; +} + /** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device @@ -1425,6 +1864,10 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case VERIFY: case VERIFY_16: return ata_scsi_verify_xlat; + + case ATA_12: + case ATA_16: + return ata_scsi_pass_thru; } return NULL; @@ -1581,7 +2024,7 @@ void ata_scsi_simulate(u16 *id, ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); break; - /* mandantory commands we haven't implemented yet */ + /* mandatory commands we haven't implemented yet */ case REQUEST_SENSE: /* all other commands */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 6518226b8f87..c595f5f58c16 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -44,10 +44,11 @@ extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); +extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); /* libata-scsi.c */ -extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 659ecf48fb4a..27d4d9ea6c6d 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -113,6 +113,9 @@ extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE]; /* values for service action in */ #define SAI_READ_CAPACITY_16 0x10 +/* Values for T10/04-262r7 */ +#define ATA_16 0x85 /* 16-byte pass-thru */ +#define ATA_12 0xa1 /* 12-byte pass-thru */ /* * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft -- cgit v1.2.3 From 0274aa2506fd2fe89a58dd6cd64d3b3f7b976af8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 22 Jun 2005 13:50:56 -0400 Subject: libata: Update 'passthru' branch for latest libata --- drivers/scsi/libata-scsi.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index cdc0a10a606c..c1cf5e038967 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -582,7 +582,11 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) sb[0] = 0x70; sb[7] = 0x0a; + +#if 0 /* when C/H/S support is merged */ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) { +#endif + if (!(tf->flags & ATA_TFLAG_LBA48)) { /* A small (28b) LBA will fit in the 32b info field */ sb[0] |= 0x80; /* set valid bit */ sb[3] = tf->device & 0x0f; @@ -977,8 +981,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, return; /* data is present; dma-map it */ - if (cmd->sc_data_direction == SCSI_DATA_READ || - cmd->sc_data_direction == SCSI_DATA_WRITE) { + if (cmd->sc_data_direction == DMA_FROM_DEVICE || + cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); @@ -1609,7 +1613,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE); + int nodata = (cmd->sc_data_direction == DMA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ @@ -1621,7 +1625,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == SCSI_DATA_WRITE) { + if (cmd->sc_data_direction == DMA_TO_DEVICE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } @@ -1645,7 +1649,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) #ifdef ATAPI_ENABLE_DMADIR /* some SATA bridges need us to indicate data xfer direction */ - if (cmd->sc_data_direction != SCSI_DATA_WRITE) + if (cmd->sc_data_direction != DMA_TO_DEVICE) qc->tf.feature |= ATAPI_DMADIR; #endif } @@ -1821,7 +1825,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) */ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - if (cmd->sc_data_direction == SCSI_DATA_WRITE) + if (cmd->sc_data_direction == DMA_TO_DEVICE) tf->flags |= ATA_TFLAG_WRITE; /* -- cgit v1.2.3 From edb3366703224d5d8df573ae698ccd6b488dc743 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 28 Jul 2005 10:36:22 +0900 Subject: [PATCH] SATA: rewritten sil24 driver This is rewritten sil24 driver against v2.6.13-rc3. Rewritten based on driver originally submitted by Silicon Image. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/Kconfig | 8 + drivers/scsi/Makefile | 1 + drivers/scsi/sata_sil24.c | 786 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 795 insertions(+) create mode 100644 drivers/scsi/sata_sil24.c (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 96df148ed969..939d3442c13a 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -499,6 +499,14 @@ config SCSI_SATA_SIL If unsure, say N. +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + config SCSI_SATA_SIS tristate "SiS 964/180 SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 3746fb9fa2f5..64aaab64aeb6 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -126,6 +126,7 @@ obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c new file mode 100644 index 000000000000..9958bc10a258 --- /dev/null +++ b/drivers/scsi/sata_sil24.c @@ -0,0 +1,786 @@ +/* + * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers + * + * Copyright 2005 Tejun Heo + * + * Based on preview driver from Silicon Image. + * + * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support + * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make + * those work. Enabling those shouldn't be difficult. Basic + * structure is all there (in libata-dev tree). If you have any + * information about this hardware, please contact me or linux-ide. + * Info is needed on... + * + * - How to issue tagged commands and turn on sactive on issue accordingly. + * - Where to put an ATAPI command and how to tell the device to send it. + * - How to enable/use 64bit. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include + +#define DRV_NAME "sata_sil24" +#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */ + +#define NR_PORTS 4 + +/* + * Port request block (PRB) 32 bytes + */ +struct sil24_prb { + u16 ctrl; + u16 prot; + u32 rx_cnt; + u8 fis[6 * 4]; +}; + +/* + * Scatter gather entry (SGE) 16 bytes + */ +struct sil24_sge { + u64 addr; + u32 cnt; + u32 flags; +}; + +/* + * Port multiplier + */ +struct sil24_port_multiplier { + u32 diag; + u32 sactive; +}; + +enum { + /* + * Global controller registers (128 bytes @ BAR0) + */ + /* 32 bit regs */ + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ + /* TF is overlayed w/ PRB regs in the preview driver, + * but it doesn't seem to work. */ + PORT_TF = 0x0000, + + PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */ + PORT_CTRL_CLR = 0x1004, + PORT_IRQ_STAT = 0x1008, + PORT_IRQ_ENABLE_SET = 0x1010, + PORT_IRQ_ENABLE_CLR = 0x1014, + PORT_ACTIVATE_UPPER_ADDR= 0x101c, + PORT_EXEC_FIFO = 0x1020, + PORT_CMD_ERR = 0x1024, + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_RESUME = (1 << 4), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 5), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 6), /* port multiplier enable */ + PORT_CS_RDY = (1 << 7), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ + PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */ + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ + PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ + PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ + PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ + PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ + PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ + PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ + PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ + PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ + PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ + PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ + PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ + PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */ + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* board id */ + BID_SIL3124 = 0, + BID_SIL3132 = 1, + + IRQ_STAT_4PORTS = 0xf, +}; + +struct sil24_cmd_block { + struct sil24_prb prb; + struct sil24_sge sge[LIBATA_MAX_PRD]; +}; + +/* + * ap->private_data + * + * The preview driver always returned 0 for status. We emulate it + * here from the previous interrupt. + */ +struct sil24_port_priv { + void *port; + struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + dma_addr_t cmd_block_dma; /* DMA base addr for them */ +}; + +/* ap->host_set->private_data */ +struct sil24_host_priv { + void *host_base; /* global controller control (128 bytes @BAR0) */ + void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ +}; + +static u8 sil24_check_status(struct ata_port *ap); +static u8 sil24_check_err(struct ata_port *ap); +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_phy_reset(struct ata_port *ap); +static void sil24_qc_prep(struct ata_queued_cmd *qc); +static int sil24_qc_issue(struct ata_queued_cmd *qc); +static void sil24_irq_clear(struct ata_port *ap); +static void sil24_eng_timeout(struct ata_port *ap); +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static int sil24_port_start(struct ata_port *ap); +static void sil24_port_stop(struct ata_port *ap); +static void sil24_host_stop(struct ata_host_set *host_set); +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static struct pci_device_id sil24_pci_tbl[] = { + { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, +}; + +static struct pci_driver sil24_pci_driver = { + .name = DRV_NAME, + .id_table = sil24_pci_tbl, + .probe = sil24_init_one, + .remove = ata_pci_remove_one, /* safe? */ +}; + +static Scsi_Host_Template sil24_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, /* NCQ not supported yet */ +}; + +static struct ata_port_operations sil24_ops = { + .port_disable = ata_port_disable, + + .check_status = sil24_check_status, + .check_altstatus = sil24_check_status, + .check_err = sil24_check_err, + .dev_select = ata_noop_dev_select, + + .phy_reset = sil24_phy_reset, + + .qc_prep = sil24_qc_prep, + .qc_issue = sil24_qc_issue, + + .eng_timeout = sil24_eng_timeout, + + .irq_handler = sil24_interrupt, + .irq_clear = sil24_irq_clear, + + .scr_read = sil24_scr_read, + .scr_write = sil24_scr_write, + + .port_start = sil24_port_start, + .port_stop = sil24_port_stop, + .host_stop = sil24_host_stop, +}; + +static struct ata_port_info sil24_port_info[] = { + /* sil_3124 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3132 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, +}; + +static u8 sil24_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static u8 sil24_check_err(struct ata_port *ap) +{ + return 0; +} + +static int sil24_scr_map[] = { + [SCR_CONTROL] = 0, + [SCR_STATUS] = 1, + [SCR_ERROR] = 2, + [SCR_ACTIVE] = 3, +}; + +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + return readl(scr_addr + sil24_scr_map[sc_reg] * 4); + } + return 0xffffffffU; +} + +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); + } +} + +static void sil24_phy_reset(struct ata_port *ap) +{ + __sata_phy_reset(ap); + /* + * No ATAPI yet. Just unconditionally indicate ATA device. + * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA + * and libata core will ignore the device. + */ + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + ap->device[0].class = ATA_DEV_ATA; +} + +static inline void sil24_fill_sg(struct ata_queued_cmd *qc, + struct sil24_cmd_block *cb) +{ + struct scatterlist *sg = qc->sg; + struct sil24_sge *sge = cb->sge; + unsigned i; + + for (i = 0; i < qc->n_elem; i++, sg++, sge++) { + sge->addr = cpu_to_le64(sg_dma_address(sg)); + sge->cnt = cpu_to_le32(sg_dma_len(sg)); + sge->flags = 0; + sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM); + } +} + +static void sil24_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + struct sil24_cmd_block *cb = pp->cmd_block + qc->tag; + struct sil24_prb *prb = &cb->prb; + + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + break; + default: + /* ATAPI isn't supported yet */ + BUG(); + } + + ata_tf_to_fis(&qc->tf, prb->fis, 0); + + if (qc->flags & ATA_QCFLAG_DMAMAP) + sil24_fill_sg(qc, cb); +} + +static int sil24_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); + + writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE); + return 0; +} + +static void sil24_irq_clear(struct ata_port *ap) +{ + /* unused */ +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + int cnt; + u32 tmp; + + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + + /* Reset controller state. Is this correct? */ + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + readl(port + PORT_CTRL_STAT); /* sync */ + + /* Max ~100ms */ + for (cnt = 0; cnt < 1000; cnt++) { + udelay(100); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_DEV_RST)) + break; + } + if (tmp & PORT_CS_DEV_RST) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); +} + +static void sil24_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (!qc) { + printk(KERN_ERR "ata%u: BUG: tiemout without command\n", + ap->id); + return; + } + + /* + * hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + printk(KERN_ERR "ata%u: command timeout\n", ap->id); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + +static inline void sil24_host_intr(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + u32 slot_stat; + + slot_stat = readl(port + PORT_SLOT_STAT); + if (!(slot_stat & HOST_SSTAT_ATTN)) { + if (qc) + ata_qc_complete(qc, 0); + } else { + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + + /* Clear IRQ/errors */ + writel(irq_stat, port + PORT_IRQ_STAT); + if (cmd_err) + writel(cmd_err, port + PORT_CMD_ERR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (qc) + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); + } +} + +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct sil24_host_priv *hpriv = host_set->private_data; + unsigned handled = 0; + u32 status; + int i; + + status = readl(hpriv->host_base + HOST_IRQ_STAT); + + if (!(status & IRQ_STAT_4PORTS)) + goto out; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) + if (status & (1 << i)) { + struct ata_port *ap = host_set->ports[i]; + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) + sil24_host_intr(host_set->ports[i]); + else { + u32 tmp; + printk(KERN_WARNING DRV_NAME + ": spurious interrupt from port %d\n", i); + tmp = readl(hpriv->host_base + HOST_CTRL); + tmp &= ~(1 << i); + writel(tmp, hpriv->host_base + HOST_CTRL); + } + handled++; + } + + spin_unlock(&host_set->lock); + out: + return IRQ_RETVAL(handled); +} + +static int sil24_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_host_priv *hpriv = ap->host_set->private_data; + struct sil24_port_priv *pp; + struct sil24_cmd_block *cb; + size_t cb_size = sizeof(*cb); + dma_addr_t cb_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); + if (!cb) { + kfree(pp); + return -ENOMEM; + } + memset(cb, 0, cb_size); + + pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE; + pp->cmd_block = cb; + pp->cmd_block_dma = cb_dma; + + ap->private_data = pp; + + return 0; +} + +static void sil24_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp = ap->private_data; + size_t cb_size = sizeof(*pp->cmd_block); + + dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); + kfree(pp); +} + +static void sil24_host_stop(struct ata_host_set *host_set) +{ + struct sil24_host_priv *hpriv = host_set->private_data; + + iounmap(hpriv->host_base); + iounmap(hpriv->port_base); + kfree(hpriv); +} + +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_probe_ent *probe_ent = NULL; + struct sil24_host_priv *hpriv = NULL; + void *host_base = NULL, *port_base = NULL; + int i, rc; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto out_disable; + + rc = -ENOMEM; + /* ioremap mmio registers */ + host_base = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!host_base) + goto out_free; + port_base = ioremap(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + if (!port_base) + goto out_free; + + /* allocate & init probe_ent and hpriv */ + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + goto out_free; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + goto out_free; + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = sil24_port_info[board_id].sht; + probe_ent->host_flags = sil24_port_info[board_id].host_flags; + probe_ent->pio_mask = sil24_port_info[board_id].pio_mask; + probe_ent->udma_mask = sil24_port_info[board_id].udma_mask; + probe_ent->port_ops = sil24_port_info[board_id].port_ops; + probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = port_base; + probe_ent->private_data = hpriv; + + memset(hpriv, 0, sizeof(*hpriv)); + hpriv->host_base = host_base; + hpriv->port_base = port_base; + + /* + * Configure the device + */ + /* + * FIXME: This device is certainly 64-bit capable. We just + * don't know how to use it. After fixing 32bit activation in + * this function, enable 64bit masks here. + */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* Mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + for (i = 0; i < probe_ent->n_ports; i++) { + void *port = port_base + i * PORT_REGS_SIZE; + unsigned long portu = (unsigned long)port; + u32 tmp; + int cnt; + + probe_ent->port[i].cmd_addr = portu + PORT_TF; + probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; + + ata_std_ports(&probe_ent->port[i]); + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + readl(port + PORT_CTRL_STAT); /* sync */ + for (cnt = 0; cnt < 10; cnt++) { + msleep(10); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_PORT_RST)) + break; + } + if (tmp & PORT_CS_PORT_RST) + printk(KERN_ERR DRV_NAME + "(%s): failed to clear port RST\n", + pci_name(pdev)); + } + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* FIXME: 32bit activation? */ + writel(0, port + PORT_ACTIVATE_UPPER_ADDR); + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT); + + /* Configure interrupts */ + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS, + port + PORT_IRQ_ENABLE_SET); + + /* Clear interrupts */ + writel(0x0fff0fff, port + PORT_IRQ_STAT); + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + + pci_set_master(pdev); + + ata_device_add(probe_ent); + + kfree(probe_ent); + return 0; + + out_free: + if (host_base) + iounmap(host_base); + if (port_base) + iounmap(port_base); + kfree(probe_ent); + kfree(hpriv); + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + return rc; +} + +static int __init sil24_init(void) +{ + return pci_module_init(&sil24_pci_driver); +} + +static void __exit sil24_exit(void) +{ + pci_unregister_driver(&sil24_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); + +module_init(sil24_init); +module_exit(sil24_exit); -- cgit v1.2.3 From 1483467faa0170cf401955b3d8d3486ea0fe802d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:42 +0900 Subject: [PATCH] sil24: add FIXME comment above ata_device_add 01_sil24_add-FIXME-comment.patch Add FIXME comment above ata_device_add. Signed-off-by: Tejun Heo sata_sil24.c | 1 + 1 files changed, 1 insertion(+) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 9958bc10a258..4868ad79b92e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -749,6 +749,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); + /* FIXME: check ata_device_add return value */ ata_device_add(probe_ent); kfree(probe_ent); -- cgit v1.2.3 From 3cc4571c4106735665e048850ff6656de9558d60 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:47 +0900 Subject: [PATCH] sil24: remove irq disable code on spurious interrupt 02_sil24_remove-irq-disable-on-spurious-intr.patch If interrupt occurs on a disabled port, the driver used to mask the port's interrupt, but we don't know if such action is necessary yet and that's not what other drives do. So, just do nothing and tell IRQ subsystem that it's not our interrupt. Signed-off-by: Tejun Heo sata_sil24.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4868ad79b92e..0f810cdd3cc2 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -535,17 +535,12 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) if (status & (1 << i)) { struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { sil24_host_intr(host_set->ports[i]); - else { - u32 tmp; - printk(KERN_WARNING DRV_NAME - ": spurious interrupt from port %d\n", i); - tmp = readl(hpriv->host_base + HOST_CTRL); - tmp &= ~(1 << i); - writel(tmp, hpriv->host_base + HOST_CTRL); - } - handled++; + handled++; + } else + printk(KERN_ERR DRV_NAME + ": interrupt from disabled port %d\n", i); } spin_unlock(&host_set->lock); -- cgit v1.2.3 From 06460aeaa26ed4a86b92c8451365d3f48abd3786 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:52 +0900 Subject: [PATCH] sil24: add testing for PCI fault 03_sil24_add-pci-fault-check.patch On entry to interrupt handler, PORT_SLOT_STAT register is read first. Check if PCI fault or device removal has occurred by testing the value for 0xffffffff. Signed-off-by: Tejun Heo sata_sil24.c | 6 ++++++ 1 files changed, 6 insertions(+) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 0f810cdd3cc2..c9318bda46a3 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -527,6 +527,12 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * status = readl(hpriv->host_base + HOST_IRQ_STAT); + if (status == 0xffffffff) { + printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } + if (!(status & IRQ_STAT_4PORTS)) goto out; -- cgit v1.2.3 From 8746618d4f18fab25916686b0d8a6be2c2912de1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:57 +0900 Subject: [PATCH] sil24: move error handling out of hot interrupt path 04_sil24_add-error_intr-function.patch Move error handling from sil24_host_intr into separate function - sil24_error_intr. Signed-off-by: Tejun Heo sata_sil24.c | 55 +++++++++++++++++++++++++++++++------------------------ 1 files changed, 31 insertions(+), 24 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 55 ++++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index c9318bda46a3..6544226c1b28 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -480,6 +480,35 @@ static void sil24_eng_timeout(struct ata_port *ap) sil24_reset_controller(ap); } +static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + + /* Clear IRQ/errors */ + writel(irq_stat, port + PORT_IRQ_STAT); + if (cmd_err) + writel(cmd_err, port + PORT_CMD_ERR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (qc) + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); @@ -491,30 +520,8 @@ static inline void sil24_host_intr(struct ata_port *ap) if (!(slot_stat & HOST_SSTAT_ATTN)) { if (qc) ata_qc_complete(qc, 0); - } else { - u32 irq_stat, cmd_err, sstatus, serror; - - irq_stat = readl(port + PORT_IRQ_STAT); - cmd_err = readl(port + PORT_CMD_ERR); - sstatus = readl(port + PORT_SSTATUS); - serror = readl(port + PORT_SERROR); - - /* Clear IRQ/errors */ - writel(irq_stat, port + PORT_IRQ_STAT); - if (cmd_err) - writel(cmd_err, port + PORT_CMD_ERR); - if (serror) - writel(serror, port + PORT_SERROR); - - printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" - " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", - ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); - - if (qc) - ata_qc_complete(qc, ATA_ERR); - - sil24_reset_controller(ap); - } + } else + sil24_error_intr(ap, slot_stat); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -- cgit v1.2.3 From 33d015b9f24d143859bb40dbe7bbb4c7805cee7d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:02 +0900 Subject: [PATCH] sil24: remove PORT_TF 05_sil24_remove-PORT_TF.patch Remove PORT_TF, as taskfile isn't located at PORT_TF. Signed-off-by: Tejun Heo sata_sil24.c | 7 +------ 1 files changed, 1 insertion(+), 6 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 6544226c1b28..47a7bfc4a6d8 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -104,9 +104,6 @@ enum { */ PORT_REGS_SIZE = 0x2000, PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ - /* TF is overlayed w/ PRB regs in the preview driver, - * but it doesn't seem to work. */ - PORT_TF = 0x0000, PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ @@ -703,9 +700,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 tmp; int cnt; - probe_ent->port[i].cmd_addr = portu + PORT_TF; - probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa; - probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); -- cgit v1.2.3 From 4f50c3cbb4b608ae4d8ee73ce273d819d901a83f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:07 +0900 Subject: [PATCH] sil24: replace pp->port w/ ap->ioaddr.cmd_addr 06_sil24_remove-pp-port.patch As ap->ioaddr.cmd_addr isn't used for PORT_TF anymore, replace pp->port w/ it as AHCI does. Signed-off-by: Tejun Heo sata_sil24.c | 17 ++++++----------- 1 files changed, 6 insertions(+), 11 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 47a7bfc4a6d8..547c29a5613b 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -214,7 +214,6 @@ struct sil24_cmd_block { * here from the previous interrupt. */ struct sil24_port_priv { - void *port; struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ }; @@ -414,10 +413,11 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + void *port = (void *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); - writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE); + writel((u32)paddr, port + PORT_CMD_ACTIVATE); return 0; } @@ -428,8 +428,7 @@ static void sil24_irq_clear(struct ata_port *ap) static void sil24_reset_controller(struct ata_port *ap) { - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; int cnt; u32 tmp; @@ -480,8 +479,7 @@ static void sil24_eng_timeout(struct ata_port *ap) static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -509,8 +507,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -561,7 +558,6 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * static int sil24_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; - struct sil24_host_priv *hpriv = ap->host_set->private_data; struct sil24_port_priv *pp; struct sil24_cmd_block *cb; size_t cb_size = sizeof(*cb); @@ -579,7 +575,6 @@ static int sil24_port_start(struct ata_port *ap) } memset(cb, 0, cb_size); - pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE; pp->cmd_block = cb; pp->cmd_block_dma = cb_dma; @@ -700,7 +695,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 tmp; int cnt; - probe_ent->port[i].cmd_addr = portu; + probe_ent->port[i].cmd_addr = portu + PORT_PRB; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); -- cgit v1.2.3 From e382eb1dbdb2dec69806a72551bcb4a736142f6d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:13 +0900 Subject: [PATCH] sil24: fix PORT_CTRL_STAT constants 07_sil24_fix-PORT_CTRL_STAT-constants.patch PORT_CTRL_STAT constants were copied incorrectly from the preview driver. Signed-off-by: Edward Falk sata_sil24.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 547c29a5613b..7a3d50dcd938 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -140,10 +140,10 @@ enum { PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ - PORT_CS_RESUME = (1 << 4), /* port resume */ - PORT_CS_32BIT_ACTV = (1 << 5), /* 32-bit activation */ - PORT_CS_PM_EN = (1 << 6), /* port multiplier enable */ - PORT_CS_RDY = (1 << 7), /* port ready to accept commands */ + PORT_CS_RESUME = (1 << 6), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ /* PORT_IRQ_STAT/ENABLE_SET/CLR */ /* bits[11:0] are masked */ -- cgit v1.2.3 From 83bbecc905b3431c60fe282830e09aaaab97b26a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:18 +0900 Subject: [PATCH] sil24: add more comments for constants 08_sil24_add-comments-for-constants.patch Add more comments to constants. Signed-off-by: Edward Falk sata_sil24.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 7a3d50dcd938..cb91894471f2 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -107,14 +107,14 @@ enum { PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ - PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */ - PORT_CTRL_CLR = 0x1004, - PORT_IRQ_STAT = 0x1008, - PORT_IRQ_ENABLE_SET = 0x1010, - PORT_IRQ_ENABLE_CLR = 0x1014, + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ PORT_ACTIVATE_UPPER_ADDR= 0x101c, - PORT_EXEC_FIFO = 0x1020, - PORT_CMD_ERR = 0x1024, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ PORT_FIS_CFG = 0x1028, PORT_FIFO_THRES = 0x102c, /* 16 bit regs */ @@ -187,7 +187,7 @@ enum { PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ - PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */ + PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ /* * Other constants -- cgit v1.2.3 From 1fa92957282e4595727c1a21bf6687ea5a2d612f Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 9 Sep 2005 11:41:12 -0700 Subject: [IA64] Need to include in a few more places. Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pcibr/pcibr_reg.c | 1 + arch/ia64/sn/pci/tioca_provider.c | 1 + arch/ia64/sn/pci/tioce_provider.c | 1 + drivers/char/agp/sgi-agp.c | 1 + 4 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 1624b39cb3ec..4f718c3e93d3 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index eaae2472d6b4..9b8dbce2b7b6 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 204826c2fa44..9f03d4e5121c 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index d3aa159c9dec..7957fc91f6ad 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 923f122573851d18a3832ca808269fa2d5046fb1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Sep 2005 13:21:29 +0900 Subject: [PATCH] sil24: initialization fix sil24 0.20 didn't use to perform (what seems to be) port multiplier initialization and controller reset 0.10 driver does. This makes some sil24 controllers malfunction. This patch adds PM initialization and controller resetting to initilization and bumps version to 0.21. Please refer to the following thread for more information. http://marc.theaimsgroup.com/?l=linux-ide&m=112582819830324&w=2 http://marc.theaimsgroup.com/?l=linux-ide&m=112636045531060&w=2 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index cb91894471f2..d8a2f5f04e82 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.21" /* Silicon Image's preview driver was 0.10 */ #define NR_PORTS 4 @@ -426,15 +426,11 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static void sil24_reset_controller(struct ata_port *ap) +static int __sil24_reset_controller(void *port) { - void *port = (void *)ap->ioaddr.cmd_addr; int cnt; u32 tmp; - printk(KERN_NOTICE DRV_NAME - " ata%u: resetting controller...\n", ap->id); - /* Reset controller state. Is this correct? */ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); readl(port + PORT_CTRL_STAT); /* sync */ @@ -446,9 +442,19 @@ static void sil24_reset_controller(struct ata_port *ap) if (!(tmp & PORT_CS_DEV_RST)) break; } + if (tmp & PORT_CS_DEV_RST) - printk(KERN_ERR DRV_NAME - " ata%u: failed to reset controller\n", ap->id); + return -1; + return 0; +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); } static void sil24_eng_timeout(struct ata_port *ap) @@ -740,6 +746,15 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Clear interrupts */ writel(0x0fff0fff, port + PORT_IRQ_STAT); writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + + /* Reset itself */ + if (__sil24_reset_controller(port)) + printk(KERN_ERR DRV_NAME + "(%s): failed to reset controller\n", + pci_name(pdev)); } /* Turn on interrupts */ -- cgit v1.2.3 From bb0ce608a3386268bd76ee6642a4cc8e6818a29b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:54 -0400 Subject: [PATCH] 8139cp: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to 8139cp. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 34b80de34fae..ebc20d9e7d7b 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1575,6 +1575,7 @@ static struct ethtool_ops cp_ethtool_ops = { .set_wol = cp_set_wol, .get_strings = cp_get_strings, .get_ethtool_stats = cp_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) @@ -1773,6 +1774,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < 3; i++) ((u16 *) (dev->dev_addr))[i] = le16_to_cpu (read_eeprom (regs, i + 7, addr_len)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->open = cp_open; dev->stop = cp_close; -- cgit v1.2.3 From 62a720b889a37496d5f36d09875578956745d196 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:55 -0400 Subject: [PATCH] 8139too: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to 8139too. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/8139too.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 4c2cf7bbd252..76ef6efd5950 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -970,6 +970,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, for (i = 0; i < 3; i++) ((u16 *) (dev->dev_addr))[i] = le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* The Rtl8139-specific entries in the device structure. */ dev->open = rtl8139_open; @@ -2465,6 +2466,7 @@ static struct ethtool_ops rtl8139_ethtool_ops = { .get_strings = rtl8139_get_strings, .get_stats_count = rtl8139_get_stats_count, .get_ethtool_stats = rtl8139_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- cgit v1.2.3 From 2160de53cc17a40ad07bd38bf52dd0bb72dd5183 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:55 -0400 Subject: [PATCH] b44: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to b44. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 94939f570f78..d27e870e59ab 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1676,6 +1676,7 @@ static struct ethtool_ops b44_ethtool_ops = { .set_pauseparam = b44_set_pauseparam, .get_msglevel = b44_get_msglevel, .set_msglevel = b44_set_msglevel, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) @@ -1718,6 +1719,7 @@ static int __devinit b44_get_invariants(struct b44 *bp) bp->dev->dev_addr[3] = eeprom[80]; bp->dev->dev_addr[4] = eeprom[83]; bp->dev->dev_addr[5] = eeprom[82]; + memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len); bp->phy_addr = eeprom[90] & 0x1f; -- cgit v1.2.3 From 9beb0ac17bcfed23feb0a6fac328216568b74bc1 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:55 -0400 Subject: [PATCH] e1000: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to e1000. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 1 + drivers/net/e1000/e1000_main.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index f133ff0b0b94..8f3a13420278 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1739,6 +1739,7 @@ struct ethtool_ops e1000_ethtool_ops = { .phys_id = e1000_phys_id, .get_stats_count = e1000_get_stats_count, .get_ethtool_stats = e1000_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; void e1000_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 7c8a0a22dcd5..d02883dcc9b3 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -614,8 +614,9 @@ e1000_probe(struct pci_dev *pdev, if(e1000_read_mac_addr(&adapter->hw)) DPRINTK(PROBE, ERR, "EEPROM Read Error\n"); memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); - if(!is_valid_ether_addr(netdev->dev_addr)) { + if(!is_valid_ether_addr(netdev->perm_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; -- cgit v1.2.3 From a92dd9233ad185904daf95d040cf88c3da2d7ef6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:56 -0400 Subject: [PATCH] e100: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to e100. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 25cc20e415da..1c918309539f 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2391,6 +2391,7 @@ static struct ethtool_ops e100_ethtool_ops = { .phys_id = e100_phys_id, .get_stats_count = e100_get_stats_count, .get_ethtool_stats = e100_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) @@ -2541,7 +2542,8 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_phy_init(nic); memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); - if(!is_valid_ether_addr(netdev->dev_addr)) { + memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); + if(!is_valid_ether_addr(netdev->perm_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC address from " "EEPROM, aborting.\n"); err = -EAGAIN; -- cgit v1.2.3 From c704b8566b060695e90ac401833db4b62813ad8a Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:56 -0400 Subject: [PATCH] forcedeth: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to forcedeth. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index d6eefdb71c17..6e042ecf6965 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -2065,6 +2065,7 @@ static struct ethtool_ops ops = { .get_regs_len = nv_get_regs_len, .get_regs = nv_get_regs, .nway_reset = nv_nway_reset, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int nv_open(struct net_device *dev) @@ -2377,8 +2378,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff; dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff; dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff; + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - if (!is_valid_ether_addr(dev->dev_addr)) { + if (!is_valid_ether_addr(dev->perm_addr)) { /* * Bad mac address. At least one bios sets the mac address * to 01:23:45:67:89:ab -- cgit v1.2.3 From df859c519ef7b72d9be7396443316da87272e8b6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:56 -0400 Subject: [PATCH] ixgb: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to ixgb. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 1 + drivers/net/ixgb/ixgb_main.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 9d026ed77ddd..319ee4cd70d8 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -723,6 +723,7 @@ struct ethtool_ops ixgb_ethtool_ops = { .phys_id = ixgb_phys_id, .get_stats_count = ixgb_get_stats_count, .get_ethtool_stats = ixgb_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; void ixgb_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 5c555373adbe..5015eaf4e20a 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -460,8 +460,9 @@ ixgb_probe(struct pci_dev *pdev, } ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - if(!is_valid_ether_addr(netdev->dev_addr)) { + if(!is_valid_ether_addr(netdev->perm_addr)) { err = -EIO; goto err_eeprom; } -- cgit v1.2.3 From 78b345890a91dc57fecea8b6792012e0098c058f Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH] ne2k-pci: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to ne2k-pci. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/ne2k-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index f1c01ac29102..e531a4eedfee 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -372,6 +372,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, printk("%2.2X%s", SA_prom[i], i == 5 ? ".\n": ":"); dev->dev_addr[i] = SA_prom[i]; } + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); return 0; @@ -637,6 +638,7 @@ static struct ethtool_ops ne2k_pci_ethtool_ops = { .get_drvinfo = ne2k_pci_get_drvinfo, .get_tx_csum = ethtool_op_get_tx_csum, .get_sg = ethtool_op_get_sg, + .get_perm_addr = ethtool_op_get_perm_addr, }; static void __devexit ne2k_pci_remove_one (struct pci_dev *pdev) -- cgit v1.2.3 From db0276b060918fac94c9d216213a31ee02cdd73e Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH] pcnet32: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to pcnet32. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 113b68099216..6c3731b608da 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -957,6 +957,7 @@ static struct ethtool_ops pcnet32_ethtool_ops = { .phys_id = pcnet32_phys_id, .get_regs_len = pcnet32_get_regs_len, .get_regs = pcnet32_get_regs, + .get_perm_addr = ethtool_op_get_perm_addr, }; /* only probes for non-PCI devices, the rest are handled by @@ -1185,9 +1186,10 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) memcpy(dev->dev_addr, promaddr, 6); } } + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ - if (!is_valid_ether_addr(dev->dev_addr)) + if (!is_valid_ether_addr(dev->perm_addr)) memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); if (pcnet32_debug & NETIF_MSG_PROBE) { -- cgit v1.2.3 From 6d6525b7f74f9593e647f8c17b1de0f652e1f177 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH] r8169: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to r8169. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index f0471d102e3c..cbc60ce365cb 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1028,6 +1028,7 @@ static struct ethtool_ops rtl8169_ethtool_ops = { .get_strings = rtl8169_get_strings, .get_stats_count = rtl8169_get_stats_count, .get_ethtool_stats = rtl8169_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum, @@ -1512,6 +1513,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Get MAC address. FIXME: read EEPROM */ for (i = 0; i < MAC_ADDR_LEN; i++) dev->dev_addr[i] = RTL_R8(MAC0 + i); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->open = rtl8169_open; dev->hard_start_xmit = rtl8169_start_xmit; -- cgit v1.2.3 From 56230d538233ba037eb679b0fc0b218d33b9b8b8 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH] skge: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to skge. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index d7c98515fdfd..757c83387a29 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -743,6 +743,7 @@ static struct ethtool_ops skge_ethtool_ops = { .phys_id = skge_phys_id, .get_stats_count = skge_get_stats_count, .get_ethtool_stats = skge_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; /* @@ -3080,6 +3081,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, /* read the mac address */ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* device is off until link detection */ netif_carrier_off(dev); -- cgit v1.2.3 From 30d60a8288ab6f59939736f5775a7110a8bfff9a Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:58 -0400 Subject: [PATCH] sundance: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to sundance. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index d500a5771dbc..e148a7212073 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -549,6 +549,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, for (i = 0; i < 3; i++) ((u16 *)dev->dev_addr)[i] = le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->base_addr = (unsigned long)ioaddr; dev->irq = irq; @@ -1619,6 +1620,7 @@ static struct ethtool_ops ethtool_ops = { .get_link = get_link, .get_msglevel = get_msglevel, .set_msglevel = set_msglevel, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- cgit v1.2.3 From b81e8e1f4a51556586f72711a165bc3a0de230f3 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:58 -0400 Subject: [PATCH] via-rhine: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to via-rhine. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fc7738ffbfff..e7b4bc3820e3 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -814,8 +814,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, for (i = 0; i < 6; i++) dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - if (!is_valid_ether_addr(dev->dev_addr)) { + if (!is_valid_ether_addr(dev->perm_addr)) { rc = -EIO; printk(KERN_ERR "Invalid MAC address\n"); goto err_out_unmap; @@ -1829,6 +1830,7 @@ static struct ethtool_ops netdev_ethtool_ops = { .set_wol = rhine_set_wol, .get_sg = ethtool_op_get_sg, .get_tx_csum = ethtool_op_get_tx_csum, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- cgit v1.2.3 From 343c686c04eec556645f251f7d6c9b3d7335dae0 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 9 Sep 2005 18:43:02 -0400 Subject: [PATCH] orinoco: WE-18 support Author: Jean Tourrilhes Signed-off-by: Pavel Roskin Use new Wireless Extension API for wireless stats. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 137 +++++++++-------------------------------- drivers/net/wireless/orinoco.h | 6 +- 2 files changed, 33 insertions(+), 110 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 8de49fe57233..639b8e4ba684 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -137,7 +137,7 @@ MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); /* We do this this way to avoid ifdefs in the actual code */ #ifdef WIRELESS_SPY -#define SPY_NUMBER(priv) (priv->spy_number) +#define SPY_NUMBER(priv) (priv->spy_data.spy_number) #else #define SPY_NUMBER(priv) 0 #endif /* WIRELESS_SPY */ @@ -396,10 +396,10 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) /* If a spy address is defined, we report stats of the * first spy address - Jean II */ if (SPY_NUMBER(priv)) { - wstats->qual.qual = priv->spy_stat[0].qual; - wstats->qual.level = priv->spy_stat[0].level; - wstats->qual.noise = priv->spy_stat[0].noise; - wstats->qual.updated = priv->spy_stat[0].updated; + wstats->qual.qual = priv->spy_data.spy_stat[0].qual; + wstats->qual.level = priv->spy_data.spy_stat[0].level; + wstats->qual.noise = priv->spy_data.spy_stat[0].noise; + wstats->qual.updated = priv->spy_data.spy_stat[0].updated; } } else { struct { @@ -718,18 +718,13 @@ static inline int is_ethersnap(void *_hdr) static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, int level, int noise) { - struct orinoco_private *priv = netdev_priv(dev); - int i; - - /* Gather wireless spy statistics: for each packet, compare the - * source address with out list, and if match, get the stats... */ - for (i = 0; i < priv->spy_number; i++) - if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) { - priv->spy_stat[i].level = level - 0x95; - priv->spy_stat[i].noise = noise - 0x95; - priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0; - priv->spy_stat[i].updated = 7; - } + struct iw_quality wstats; + wstats.level = level - 0x95; + wstats.noise = noise - 0x95; + wstats.qual = (level > noise) ? (level - noise) : 0; + wstats.updated = 7; + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); } static void orinoco_stat_gather(struct net_device *dev, @@ -2458,8 +2453,11 @@ struct net_device *alloc_orinocodev(int sizeof_card, dev->watchdog_timeo = HZ; /* 1 second timeout */ dev->get_stats = orinoco_get_stats; dev->ethtool_ops = &orinoco_ethtool_ops; - dev->get_wireless_stats = orinoco_get_wireless_stats; dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; +#ifdef WIRELESS_SPY + priv->wireless_data.spy_data = &priv->spy_data; + dev->wireless_data = &priv->wireless_data; +#endif dev->change_mtu = orinoco_change_mtu; dev->set_multicast_list = orinoco_set_multicast_list; /* we use the default eth_mac_addr for setting the MAC addr */ @@ -2831,7 +2829,7 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, } } - if ((priv->iw_mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ + if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ /* Quality stats meaningless in ad-hoc mode */ } else { range->max_qual.qual = 0x8b - 0x2f; @@ -2878,6 +2876,14 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, range->min_r_time = 0; range->max_r_time = 65535 * 1000; /* ??? */ + /* Event capability (kernel) */ + IW_EVENT_CAPA_SET_KERNEL(range->event_capa); + /* Event capability (driver) */ + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); + IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); + TRACE_EXIT(dev->name); return 0; @@ -3837,92 +3843,6 @@ static int orinoco_ioctl_getrid(struct net_device *dev, return err; } -/* Spy is used for link quality/strength measurements in Ad-Hoc mode - * Jean II */ -static int orinoco_ioctl_setspy(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) - -{ - struct orinoco_private *priv = netdev_priv(dev); - struct sockaddr *address = (struct sockaddr *) extra; - int number = srq->length; - int i; - unsigned long flags; - - /* Make sure nobody mess with the structure while we do */ - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* orinoco_lock() doesn't disable interrupts, so make sure the - * interrupt rx path don't get confused while we copy */ - priv->spy_number = 0; - - if (number > 0) { - /* Extract the addresses */ - for (i = 0; i < number; i++) - memcpy(priv->spy_address[i], address[i].sa_data, - ETH_ALEN); - /* Reset stats */ - memset(priv->spy_stat, 0, - sizeof(struct iw_quality) * IW_MAX_SPY); - /* Set number of addresses */ - priv->spy_number = number; - } - - /* Now, let the others play */ - orinoco_unlock(priv, &flags); - - /* Do NOT call commit handler */ - return 0; -} - -static int orinoco_ioctl_getspy(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct sockaddr *address = (struct sockaddr *) extra; - int number; - int i; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - number = priv->spy_number; - /* Create address struct */ - for (i = 0; i < number; i++) { - memcpy(address[i].sa_data, priv->spy_address[i], ETH_ALEN); - address[i].sa_family = AF_UNIX; - } - if (number > 0) { - /* Create address struct */ - for (i = 0; i < number; i++) { - memcpy(address[i].sa_data, priv->spy_address[i], - ETH_ALEN); - address[i].sa_family = AF_UNIX; - } - /* Copy stats */ - /* In theory, we should disable irqs while copying the stats - * because the rx path might update it in the middle... - * Bah, who care ? - Jean II */ - memcpy(extra + (sizeof(struct sockaddr) * number), - priv->spy_stat, sizeof(struct iw_quality) * number); - } - /* Reset updated flags. */ - for (i = 0; i < number; i++) - priv->spy_stat[i].updated = 0; - - orinoco_unlock(priv, &flags); - - srq->length = number; - - return 0; -} - /* Trigger a scan (look for other cells in the vicinity */ static int orinoco_ioctl_setscan(struct net_device *dev, struct iw_request_info *info, @@ -4353,8 +4273,10 @@ static const iw_handler orinoco_handler[] = { [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, - [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setspy, - [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getspy, + [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, + [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, + [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, + [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, @@ -4399,6 +4321,7 @@ static const struct iw_handler_def orinoco_handler_def = { .standard = orinoco_handler, .private = orinoco_private_handler, .private_args = orinoco_privtab, + .get_wireless_stats = orinoco_get_wireless_stats, }; static void orinoco_get_drvinfo(struct net_device *dev, diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 2f213a7103fe..c800563034a7 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "hermes.h" @@ -112,9 +113,8 @@ struct orinoco_private { u16 pm_on, pm_mcast, pm_period, pm_timeout; u16 preamble; #ifdef WIRELESS_SPY - int spy_number; - u_char spy_address[IW_MAX_SPY][ETH_ALEN]; - struct iw_quality spy_stat[IW_MAX_SPY]; + struct iw_spy_data spy_data; /* iwspy support */ + struct iw_public_data wireless_data; #endif /* Configuration dependent variables */ -- cgit v1.2.3 From 3173c8907ffb2c64456142da3df2bd0500bd59e0 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Sun, 11 Sep 2005 02:09:55 -0700 Subject: [PATCH] drivers/net: fix-up schedule_timeout() usage Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan Cc: Jeff Garzik Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 3 +- drivers/net/hp100.c | 48 +++++++++++-------------------- drivers/net/irda/stir4200.c | 7 ++--- drivers/net/ixgb/ixgb_ethtool.c | 7 ++--- drivers/net/ns83820.c | 3 +- drivers/net/tokenring/ibmtr.c | 9 +++--- drivers/net/tokenring/olympic.c | 2 +- drivers/net/tokenring/tms380tr.c | 3 +- drivers/net/typhoon.c | 7 ++--- drivers/net/wan/cosa.c | 6 ++-- drivers/net/wan/dscc4.c | 9 ++---- drivers/net/wan/farsync.c | 3 +- drivers/net/wireless/ipw2100.c | 17 ++++------- drivers/net/wireless/prism54/islpci_dev.c | 6 ++-- drivers/net/wireless/prism54/islpci_mgt.c | 5 ++-- include/linux/ibmtr.h | 4 +-- include/linux/netdevice.h | 6 ++-- 17 files changed, 53 insertions(+), 92 deletions(-) (limited to 'drivers') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index ebc20d9e7d7b..bd99c268e2da 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1029,8 +1029,7 @@ static void cp_reset_hw (struct cp_private *cp) if (!(cpr8(Cmd) & CmdReset)) return; - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); } printk(KERN_ERR "%s: hardware reset timeout\n", cp->dev->name); diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index cf0ac6fda1a1..b71fab6e34f4 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -2517,10 +2517,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); if (time_after_eq(jiffies, time)) /* no signal->no logout */ @@ -2536,10 +2534,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); #ifdef HP100_DEBUG @@ -2577,10 +2573,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */ @@ -2591,10 +2585,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); if (time_before_eq(time, jiffies)) { @@ -2606,10 +2598,8 @@ static int hp100_down_vg_link(struct net_device *dev) time = jiffies + (2 * HZ); /* This seems to take a while.... */ do { - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); return 0; @@ -2659,10 +2649,8 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) do { if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); /* Start an addressed training and optionally request promiscuous port */ @@ -2697,10 +2685,8 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) do { if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_before(jiffies, time)); if (time_after_eq(jiffies, time)) { @@ -2723,10 +2709,8 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) #endif break; } - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); } diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 15f207323d97..3961a754e920 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -678,10 +678,9 @@ static void turnaround_delay(const struct stir_cb *stir, long us) return; ticks = us / (1000000 / HZ); - if (ticks > 0) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1 + ticks); - } else + if (ticks > 0) + schedule_timeout_interruptible(1 + ticks); + else udelay(us); } diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 319ee4cd70d8..04e47189d830 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -645,11 +645,10 @@ ixgb_phys_id(struct net_device *netdev, uint32_t data) mod_timer(&adapter->blink_timer, jiffies); - set_current_state(TASK_INTERRUPTIBLE); - if(data) - schedule_timeout(data * HZ); + if (data) + schedule_timeout_interruptible(data * HZ); else - schedule_timeout(MAX_SCHEDULE_TIMEOUT); + schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); del_timer_sync(&adapter->blink_timer); ixgb_led_off(&adapter->hw); diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index e64df4d0800b..ed72a23c85dd 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1632,8 +1632,7 @@ static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enab timed_out = 1; break; } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); } if (status & fail) diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index e7b001017b9a..8154bbbb7792 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -318,7 +318,7 @@ static void ibmtr_cleanup_card(struct net_device *dev) if (dev->base_addr) { outb(0,dev->base_addr+ADAPTRESET); - schedule_timeout(TR_RST_TIME); /* wait 50ms */ + schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ outb(0,dev->base_addr+ADAPTRESETREL); } @@ -859,8 +859,7 @@ static int tok_init_card(struct net_device *dev) writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); outb(0, PIOaddr + ADAPTRESET); - current->state=TASK_UNINTERRUPTIBLE; - schedule_timeout(TR_RST_TIME); /* wait 50ms */ + schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ outb(0, PIOaddr + ADAPTRESETREL); #ifdef ENABLE_PAGING @@ -908,8 +907,8 @@ static int tok_open(struct net_device *dev) DPRINTK("Adapter is up and running\n"); return 0; } - current->state=TASK_INTERRUPTIBLE; - i=schedule_timeout(TR_RETRY_INTERVAL); /* wait 30 seconds */ + i=schedule_timeout_interruptible(TR_RETRY_INTERVAL); + /* wait 30 seconds */ if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */ } outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/ diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c index 9e7923192a49..05477d24fd49 100644 --- a/drivers/net/tokenring/olympic.c +++ b/drivers/net/tokenring/olympic.c @@ -1101,7 +1101,7 @@ static int olympic_close(struct net_device *dev) while(olympic_priv->srb_queued) { - t = schedule_timeout(60*HZ); + t = schedule_timeout_interruptible(60*HZ); if(signal_pending(current)) { printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 2e39bf1f7462..c1925590a0e1 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -1243,8 +1243,7 @@ void tms380tr_wait(unsigned long time) tmp = jiffies + time/(1000000/HZ); do { - current->state = TASK_INTERRUPTIBLE; - tmp = schedule_timeout(tmp); + tmp = schedule_timeout_interruptible(tmp); } while(time_after(tmp, jiffies)); #else udelay(time); diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index ecfa6f8805ce..4c76cb794bfb 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -419,10 +419,9 @@ typhoon_reset(void __iomem *ioaddr, int wait_type) TYPHOON_STATUS_WAITING_FOR_HOST) goto out; - if(wait_type == WaitSleep) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); - } else + if(wait_type == WaitSleep) + schedule_timeout_uninterruptible(1); + else udelay(TYPHOON_UDELAY); } diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 7ff814fd65d0..ae9e897c255e 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -1617,8 +1617,7 @@ static int get_wait_data(struct cosa_data *cosa) return r; } /* sleep if not ready to read */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_interruptible(1); } printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n", cosa_getstatus(cosa)); @@ -1644,8 +1643,7 @@ static int put_wait_data(struct cosa_data *cosa, int data) } #if 0 /* sleep if not ready to read */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); + schedule_timeout_interruptible(1); #endif } printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n", diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 520a77a798e2..0c1ab4ac8bdb 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -542,8 +542,7 @@ static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv, msg, i); goto done; } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); rmb(); } while (++i > 0); printk(KERN_ERR "%s: %s timeout\n", dev->name, msg); @@ -588,8 +587,7 @@ static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv) (dpriv->iqtx[cur] & Xpr)) break; smp_rmb(); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); } while (++i > 0); return (i >= 0 ) ? i : -EAGAIN; @@ -1035,8 +1033,7 @@ static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr) /* Flush posted writes */ readl(ioaddr + GSTAR); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); for (i = 0; i < 16; i++) pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]); diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 2c83cca34b86..10befb02d768 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -980,8 +980,7 @@ fst_issue_cmd(struct fst_port_info *port, unsigned short cmd) /* Wait for any previous command to complete */ while (mbval > NAK) { spin_unlock_irqrestore(&card->card_lock, flags); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); spin_lock_irqsave(&card->card_lock, flags); if (++safety > 2000) { diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 2414e6493aa5..e5cdb5bfabc8 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -800,8 +800,7 @@ static int ipw2100_hw_send_command(struct ipw2100_priv *priv, * doesn't seem to have as many firmware restart cycles... * * As a test, we're sticking in a 1/100s delay here */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ / 100); + schedule_timeout_uninterruptible(msecs_to_jiffies(10)); return 0; @@ -1256,8 +1255,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv) IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); i = 5000; do { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(40 * HZ / 1000); + schedule_timeout_uninterruptible(msecs_to_jiffies(40)); /* Todo... wait for sync command ... */ read_register(priv->net_dev, IPW_REG_INTA, &inta); @@ -1411,8 +1409,7 @@ static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) (val2 & IPW2100_COMMAND_PHY_OFF)) return 0; - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HW_PHY_OFF_LOOP_DELAY); + schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY); } return -EIO; @@ -1466,7 +1463,7 @@ fail_up: static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) { -#define HW_POWER_DOWN_DELAY (HZ / 10) +#define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100)) struct host_command cmd = { .host_command = HOST_PRE_POWER_DOWN, @@ -1520,10 +1517,8 @@ static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) printk(KERN_WARNING DRV_NAME ": " "%s: Power down command failed: Error %d\n", priv->net_dev->name, err); - else { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HW_POWER_DOWN_DELAY); - } + else + schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY); } priv->status &= ~STATUS_ENABLED; diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 6f13d4a8e2d3..10cce514c15d 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -439,8 +439,7 @@ prism54_bring_down(islpci_private *priv) wmb(); /* wait a while for the device to reset */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(50*HZ/1000); + schedule_timeout_uninterruptible(msecs_to_jiffies(50)); return 0; } @@ -491,8 +490,7 @@ islpci_reset_if(islpci_private *priv) /* The software reset acknowledge needs about 220 msec here. * Be conservative and wait for up to one second. */ - set_current_state(TASK_UNINTERRUPTIBLE); - remaining = schedule_timeout(HZ); + remaining = schedule_timeout_uninterruptible(HZ); if(remaining > 0) { result = 0; diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index b6f2e5a223be..4937a5ad4b2c 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -455,7 +455,7 @@ islpci_mgt_transaction(struct net_device *ndev, struct islpci_mgmtframe **recvframe) { islpci_private *priv = netdev_priv(ndev); - const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000; + const long wait_cycle_jiffies = msecs_to_jiffies(ISL38XX_WAIT_CYCLE * 10); long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies; int err; DEFINE_WAIT(wait); @@ -475,8 +475,7 @@ islpci_mgt_transaction(struct net_device *ndev, int timeleft; struct islpci_mgmtframe *frame; - set_current_state(TASK_UNINTERRUPTIBLE); - timeleft = schedule_timeout(wait_cycle_jiffies); + timeleft = schedule_timeout_uninterruptible(wait_cycle_jiffies); frame = xchg(&priv->mgmt_received, NULL); if (frame) { if (frame->header->oid == oid) { diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h index 2ef0b21517fb..1c7a0dd5536a 100644 --- a/include/linux/ibmtr.h +++ b/include/linux/ibmtr.h @@ -7,8 +7,8 @@ /* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */ #define TR_RETRY_INTERVAL (30*HZ) /* 500 on PC = 5 s */ -#define TR_RST_TIME (HZ/20) /* 5 on PC = 50 ms */ -#define TR_BUSY_INTERVAL (HZ/5) /* 5 on PC = 200 ms */ +#define TR_RST_TIME (msecs_to_jiffies(50)) /* 5 on PC = 50 ms */ +#define TR_BUSY_INTERVAL (msecs_to_jiffies(200)) /* 5 on PC = 200 ms */ #define TR_SPIN_INTERVAL (3*HZ) /* 3 seconds before init timeout */ #define TR_ISA 1 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 7c717907896d..98c98e6cd4f3 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -852,11 +852,9 @@ static inline void netif_rx_complete(struct net_device *dev) static inline void netif_poll_disable(struct net_device *dev) { - while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) { + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) /* No hurry. */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + schedule_timeout_interruptible(1); } static inline void netif_poll_enable(struct net_device *dev) -- cgit v1.2.3 From 8e18d1f9c9dcbf2de5b79cad771ed639983ab6cd Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 10 Sep 2005 14:45:00 -0700 Subject: [PATCH] Replace drivers/net/wan custom ctype macros with standard ones Replace the custom is_digit()/is_hex_digit() macros with isdigit()/isxdigit() from Additionaly remove unused macro is_alpha() from Signed-off-by: Tobias Klauser Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wan/cycx_x25.c | 5 +++-- drivers/net/wan/sdla_fr.c | 4 ++-- drivers/net/wan/sdla_x25.c | 8 ++++---- include/linux/cyclomx.h | 2 -- include/linux/wanpipe.h | 9 --------- 5 files changed, 9 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c index 02d57c0b4243..a631d1c2fa14 100644 --- a/drivers/net/wan/cycx_x25.c +++ b/drivers/net/wan/cycx_x25.c @@ -78,6 +78,7 @@ #define CYCLOMX_X25_DEBUG 1 +#include /* isdigit() */ #include /* return codes */ #include /* ARPHRD_HWX25 */ #include /* printk(), and other useful stuff */ @@ -418,7 +419,7 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, /* Set channel timeouts (default if not specified) */ chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90; - } else if (is_digit(conf->addr[0])) { /* PVC */ + } else if (isdigit(conf->addr[0])) { /* PVC */ s16 lcn = dec_to_uint(conf->addr, 0); if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc) @@ -1531,7 +1532,7 @@ static unsigned dec_to_uint(u8 *str, int len) if (!len) len = strlen(str); - for (; len && is_digit(*str); ++str, --len) + for (; len && isdigit(*str); ++str, --len) val = (val * 10) + (*str - (unsigned) '0'); return val; diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c index 0497dbdb8631..7f1ce9d4333e 100644 --- a/drivers/net/wan/sdla_fr.c +++ b/drivers/net/wan/sdla_fr.c @@ -822,7 +822,7 @@ static int new_if(struct wan_device* wandev, struct net_device* dev, chan->card = card; /* verify media address */ - if (is_digit(conf->addr[0])) { + if (isdigit(conf->addr[0])) { dlci = dec_to_uint(conf->addr, 0); @@ -3456,7 +3456,7 @@ static unsigned int dec_to_uint (unsigned char* str, int len) if (!len) len = strlen(str); - for (val = 0; len && is_digit(*str); ++str, --len) + for (val = 0; len && isdigit(*str); ++str, --len) val = (val * 10) + (*str - (unsigned)'0'); return val; diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c index 8a95d61a2f8f..63f846d6f3a6 100644 --- a/drivers/net/wan/sdla_x25.c +++ b/drivers/net/wan/sdla_x25.c @@ -957,7 +957,7 @@ static int new_if(struct wan_device* wandev, struct net_device* dev, chan->hold_timeout = (conf->hold_timeout) ? conf->hold_timeout : 10; - }else if (is_digit(conf->addr[0])){ /* PVC */ + }else if (isdigit(conf->addr[0])){ /* PVC */ int lcn = dec_to_uint(conf->addr, 0); if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){ @@ -3875,7 +3875,7 @@ static unsigned int dec_to_uint (unsigned char* str, int len) if (!len) len = strlen(str); - for (val = 0; len && is_digit(*str); ++str, --len) + for (val = 0; len && isdigit(*str); ++str, --len) val = (val * 10) + (*str - (unsigned)'0'); return val; @@ -3896,9 +3896,9 @@ static unsigned int hex_to_uint (unsigned char* str, int len) for (val = 0; len; ++str, --len) { ch = *str; - if (is_digit(ch)) + if (isdigit(ch)) val = (val << 4) + (ch - (unsigned)'0'); - else if (is_hex_digit(ch)) + else if (isxdigit(ch)) val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10); else break; } diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h index 04fa7dff079c..300d704bdb9a 100644 --- a/include/linux/cyclomx.h +++ b/include/linux/cyclomx.h @@ -37,8 +37,6 @@ #include #endif -#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0) - /* Adapter Data Space. * This structure is needed because we handle multiple cards, otherwise * static data would do it. diff --git a/include/linux/wanpipe.h b/include/linux/wanpipe.h index 167d956c492b..dae9860091dd 100644 --- a/include/linux/wanpipe.h +++ b/include/linux/wanpipe.h @@ -265,15 +265,6 @@ typedef struct { #include #include - -#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0) -#define is_alpha(ch) ((((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'z')||\ - ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'Z'))?1:0) -#define is_hex_digit(ch) ((((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')||\ - ((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'f')||\ - ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'F'))?1:0) - - /****** Data Structures *****************************************************/ /* Adapter Data Space. -- cgit v1.2.3 From 7665a08928f241247afe8c76865cdbe4ef5489bf Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 9 Sep 2005 23:17:28 -0700 Subject: [PATCH] drivers/net/wan/: possible cleanups This patch contains possible cleanups including the following: - make needlessly global code static - #if 0 the following unused global function: - sdladrv.c: sdla_intde - remove the following unused global variable: - lmc_media.c: lmc_t1_cables - remove the following unneeded EXPORT_SYMBOL's: - cycx_drv.c: cycx_inten - sdladrv.c: sdla_inten - sdladrv.c: sdla_intde - sdladrv.c: sdla_intack - sdladrv.c: sdla_intr - syncppp.c: sppp_input - syncppp.c: sppp_change_mtu Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wan/cycx_drv.c | 7 ++-- drivers/net/wan/cycx_main.c | 2 +- drivers/net/wan/dscc4.c | 14 ++++--- drivers/net/wan/farsync.c | 24 ++++++------ drivers/net/wan/hdlc_fr.c | 2 +- drivers/net/wan/lmc/lmc_debug.c | 10 ++--- drivers/net/wan/lmc/lmc_media.c | 8 ---- drivers/net/wan/pc300.h | 16 -------- drivers/net/wan/pc300_drv.c | 87 +++++++++++++++++++++-------------------- drivers/net/wan/pc300_tty.c | 18 ++++----- drivers/net/wan/sdla.c | 20 +++++----- drivers/net/wan/sdladrv.c | 16 +++----- drivers/net/wan/syncppp.c | 10 ++--- include/linux/cycx_drv.h | 1 - include/linux/sdladrv.h | 4 -- include/net/syncppp.h | 1 - 16 files changed, 101 insertions(+), 139 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index 9e56fc346ba4..e6d005726aad 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -109,7 +109,7 @@ static long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; * < 0 error. * Context: process */ -int __init cycx_drv_init(void) +static int __init cycx_drv_init(void) { printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE, copyright); @@ -119,7 +119,7 @@ int __init cycx_drv_init(void) /* Module 'remove' entry point. * o release all remaining system resources */ -void cycx_drv_cleanup(void) +static void cycx_drv_cleanup(void) { } @@ -184,8 +184,7 @@ int cycx_down(struct cycx_hw *hw) } /* Enable interrupt generation. */ -EXPORT_SYMBOL(cycx_inten); -void cycx_inten(struct cycx_hw *hw) +static void cycx_inten(struct cycx_hw *hw) { writeb(0, hw->dpmbase); } diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c index 7b48064364dc..430b1f630fb4 100644 --- a/drivers/net/wan/cycx_main.c +++ b/drivers/net/wan/cycx_main.c @@ -103,7 +103,7 @@ static struct cycx_device *cycx_card_array; /* adapter data space */ * < 0 error. * Context: process */ -int __init cycx_init(void) +static int __init cycx_init(void) { int cnt, err = -ENOMEM; diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 0c1ab4ac8bdb..2f61a47b4716 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -446,8 +446,8 @@ static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv, return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda; } -int state_check(u32 state, struct dscc4_dev_priv *dpriv, struct net_device *dev, - const char *msg) +static int state_check(u32 state, struct dscc4_dev_priv *dpriv, + struct net_device *dev, const char *msg) { int ret = 0; @@ -466,8 +466,9 @@ int state_check(u32 state, struct dscc4_dev_priv *dpriv, struct net_device *dev, return ret; } -void dscc4_tx_print(struct net_device *dev, struct dscc4_dev_priv *dpriv, - char *msg) +static void dscc4_tx_print(struct net_device *dev, + struct dscc4_dev_priv *dpriv, + char *msg) { printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n", dev->name, dpriv->tx_current, dpriv->tx_dirty, msg); @@ -507,7 +508,8 @@ static void dscc4_release_ring(struct dscc4_dev_priv *dpriv) } } -inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, struct net_device *dev) +static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, + struct net_device *dev) { unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE; struct RxFD *rx_fd = dpriv->rx_fd + dirty; @@ -1891,7 +1893,7 @@ try: * It failed and locked solid. Thus the introduction of a dummy skb. * Problem is acknowledged in errata sheet DS5. Joy :o/ */ -struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv) +static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv) { struct sk_buff *skb; diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 10befb02d768..7981a2c7906e 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -74,11 +74,11 @@ MODULE_LICENSE("GPL"); /* * Modules parameters and associated varaibles */ -int fst_txq_low = FST_LOW_WATER_MARK; -int fst_txq_high = FST_HIGH_WATER_MARK; -int fst_max_reads = 7; -int fst_excluded_cards = 0; -int fst_excluded_list[FST_MAX_CARDS]; +static int fst_txq_low = FST_LOW_WATER_MARK; +static int fst_txq_high = FST_HIGH_WATER_MARK; +static int fst_max_reads = 7; +static int fst_excluded_cards = 0; +static int fst_excluded_list[FST_MAX_CARDS]; module_param(fst_txq_low, int, 0); module_param(fst_txq_high, int, 0); @@ -572,13 +572,13 @@ static void do_bottom_half_rx(struct fst_card_info *card); static void fst_process_tx_work_q(unsigned long work_q); static void fst_process_int_work_q(unsigned long work_q); -DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0); -DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0); +static DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0); +static DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0); -struct fst_card_info *fst_card_array[FST_MAX_CARDS]; -spinlock_t fst_work_q_lock; -u64 fst_work_txq; -u64 fst_work_intq; +static struct fst_card_info *fst_card_array[FST_MAX_CARDS]; +static spinlock_t fst_work_q_lock; +static u64 fst_work_txq; +static u64 fst_work_intq; static void fst_q_work_item(u64 * queue, int card_index) @@ -1497,7 +1497,7 @@ do_bottom_half_rx(struct fst_card_info *card) * The interrupt service routine * Dev_id is our fst_card_info pointer */ -irqreturn_t +static irqreturn_t fst_intr(int irq, void *dev_id, struct pt_regs *regs) { struct fst_card_info *card; diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index a5d6891c9d4c..e1601d35dced 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -330,7 +330,7 @@ static int pvc_close(struct net_device *dev) -int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { pvc_device *pvc = dev_to_pvc(dev); fr_proto_pvc_info info; diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c index 9dccd9546a17..3b94352b0d03 100644 --- a/drivers/net/wan/lmc/lmc_debug.c +++ b/drivers/net/wan/lmc/lmc_debug.c @@ -8,10 +8,10 @@ /* * Prints out len, max to 80 octets using printk, 20 per line */ -void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) -{ #ifdef DEBUG #ifdef LMC_PACKET_LOG +void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) +{ int iNewLine = 1; char str[80], *pstr; @@ -43,26 +43,24 @@ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) } sprintf(pstr, "\n"); printk(str); +} #endif #endif -} #ifdef DEBUG u_int32_t lmcEventLogIndex = 0; u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; -#endif void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3) { -#ifdef DEBUG lmcEventLogBuf[lmcEventLogIndex++] = EventNum; lmcEventLogBuf[lmcEventLogIndex++] = arg2; lmcEventLogBuf[lmcEventLogIndex++] = arg3; lmcEventLogBuf[lmcEventLogIndex++] = jiffies; lmcEventLogIndex &= (LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS) - 1; -#endif } +#endif /* DEBUG */ void lmc_trace(struct net_device *dev, char *msg){ #ifdef LMC_TRACE diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index f55ce76b00ed..af8b55fdd9d9 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -47,14 +47,6 @@ * of the GNU General Public License version 2, incorporated herein by reference. */ -/* - * For lack of a better place, put the SSI cable stuff here. - */ -char *lmc_t1_cables[] = { - "V.10/RS423", "EIA530A", "reserved", "X.21", "V.35", - "EIA449/EIA530/V.36", "V.28/EIA232", "none", NULL -}; - /* * protocol independent method. */ diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index 73401b0f0151..2024b26b99e6 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -472,24 +472,8 @@ enum pc300_loopback_cmds { #ifdef __KERNEL__ /* Function Prototypes */ -int dma_buf_write(pc300_t *, int, ucchar *, int); -int dma_buf_read(pc300_t *, int, struct sk_buff *); void tx_dma_start(pc300_t *, int); -void rx_dma_start(pc300_t *, int); -void tx_dma_stop(pc300_t *, int); -void rx_dma_stop(pc300_t *, int); -int cpc_queue_xmit(struct sk_buff *, struct net_device *); -void cpc_net_rx(struct net_device *); -void cpc_sca_status(pc300_t *, int); -int cpc_change_mtu(struct net_device *, int); -int cpc_ioctl(struct net_device *, struct ifreq *, int); -int ch_config(pc300dev_t *); -int rx_config(pc300dev_t *); -int tx_config(pc300dev_t *); -void cpc_opench(pc300dev_t *); -void cpc_closech(pc300dev_t *); int cpc_open(struct net_device *dev); -int cpc_close(struct net_device *dev); int cpc_set_media(hdlc_device *, int); #endif /* __KERNEL__ */ diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 3e7753b10717..a3e65d1bc19b 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -291,6 +291,7 @@ static uclong detect_ram(pc300_t *); static void plx_init(pc300_t *); static void cpc_trace(struct net_device *, struct sk_buff *, char); static int cpc_attach(struct net_device *, unsigned short, unsigned short); +static int cpc_close(struct net_device *dev); #ifdef CONFIG_PC300_MLPPP void cpc_tty_init(pc300dev_t * dev); @@ -437,7 +438,7 @@ static void rx_dma_buf_check(pc300_t * card, int ch) printk("\n"); } -int dma_get_rx_frame_size(pc300_t * card, int ch) +static int dma_get_rx_frame_size(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; ucshort first_bd = card->chan[ch].rx_first_bd; @@ -462,7 +463,7 @@ int dma_get_rx_frame_size(pc300_t * card, int ch) * dma_buf_write: writes a frame to the Tx DMA buffers * NOTE: this function writes one frame at a time. */ -int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) +static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) { int i, nchar; volatile pcsca_bd_t __iomem *ptdescr; @@ -503,7 +504,7 @@ int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) * dma_buf_read: reads a frame from the Rx DMA buffers * NOTE: this function reads one frame at a time. */ -int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) +static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) { int nchar; pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; @@ -560,7 +561,7 @@ int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) return (rcvd); } -void tx_dma_stop(pc300_t * card, int ch) +static void tx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; ucchar drr_ena_bit = 1 << (5 + 2 * ch); @@ -571,7 +572,7 @@ void tx_dma_stop(pc300_t * card, int ch) cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); } -void rx_dma_stop(pc300_t * card, int ch) +static void rx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; ucchar drr_ena_bit = 1 << (4 + 2 * ch); @@ -582,7 +583,7 @@ void rx_dma_stop(pc300_t * card, int ch) cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); } -void rx_dma_start(pc300_t * card, int ch) +static void rx_dma_start(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; @@ -607,7 +608,7 @@ void rx_dma_start(pc300_t * card, int ch) /*************************/ /*** FALC Routines ***/ /*************************/ -void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) +static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) { void __iomem *falcbase = card->hw.falcbase; unsigned long i = 0; @@ -622,7 +623,7 @@ void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) cpc_writeb(falcbase + F_REG(CMDR, ch), cmd); } -void falc_intr_enable(pc300_t * card, int ch) +static void falc_intr_enable(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -672,7 +673,7 @@ void falc_intr_enable(pc300_t * card, int ch) } } -void falc_open_timeslot(pc300_t * card, int ch, int timeslot) +static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; ucchar tshf = card->chan[ch].falc.offset; @@ -688,7 +689,7 @@ void falc_open_timeslot(pc300_t * card, int ch, int timeslot) (0x80 >> (timeslot & 0x07))); } -void falc_close_timeslot(pc300_t * card, int ch, int timeslot) +static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; ucchar tshf = card->chan[ch].falc.offset; @@ -704,7 +705,7 @@ void falc_close_timeslot(pc300_t * card, int ch, int timeslot) ~(0x80 >> (timeslot & 0x07))); } -void falc_close_all_timeslots(pc300_t * card, int ch) +static void falc_close_all_timeslots(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -726,7 +727,7 @@ void falc_close_all_timeslots(pc300_t * card, int ch) } } -void falc_open_all_timeslots(pc300_t * card, int ch) +static void falc_open_all_timeslots(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -758,7 +759,7 @@ void falc_open_all_timeslots(pc300_t * card, int ch) } } -void falc_init_timeslot(pc300_t * card, int ch) +static void falc_init_timeslot(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -776,7 +777,7 @@ void falc_init_timeslot(pc300_t * card, int ch) } } -void falc_enable_comm(pc300_t * card, int ch) +static void falc_enable_comm(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -792,7 +793,7 @@ void falc_enable_comm(pc300_t * card, int ch) ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); } -void falc_disable_comm(pc300_t * card, int ch) +static void falc_disable_comm(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -806,7 +807,7 @@ void falc_disable_comm(pc300_t * card, int ch) ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); } -void falc_init_t1(pc300_t * card, int ch) +static void falc_init_t1(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -975,7 +976,7 @@ void falc_init_t1(pc300_t * card, int ch) falc_close_all_timeslots(card, ch); } -void falc_init_e1(pc300_t * card, int ch) +static void falc_init_e1(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1155,7 +1156,7 @@ void falc_init_e1(pc300_t * card, int ch) falc_close_all_timeslots(card, ch); } -void falc_init_hdlc(pc300_t * card, int ch) +static void falc_init_hdlc(pc300_t * card, int ch) { void __iomem *falcbase = card->hw.falcbase; pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; @@ -1181,7 +1182,7 @@ void falc_init_hdlc(pc300_t * card, int ch) falc_intr_enable(card, ch); } -void te_config(pc300_t * card, int ch) +static void te_config(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1241,7 +1242,7 @@ void te_config(pc300_t * card, int ch) CPC_UNLOCK(card, flags); } -void falc_check_status(pc300_t * card, int ch, unsigned char frs0) +static void falc_check_status(pc300_t * card, int ch, unsigned char frs0) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1397,7 +1398,7 @@ void falc_check_status(pc300_t * card, int ch, unsigned char frs0) } } -void falc_update_stats(pc300_t * card, int ch) +static void falc_update_stats(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1450,7 +1451,7 @@ void falc_update_stats(pc300_t * card, int ch) * the synchronizer and then sent to the system interface. *---------------------------------------------------------------------------- */ -void falc_remote_loop(pc300_t * card, int ch, int loop_on) +static void falc_remote_loop(pc300_t * card, int ch, int loop_on) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1495,7 +1496,7 @@ void falc_remote_loop(pc300_t * card, int ch, int loop_on) * coding must be identical. *---------------------------------------------------------------------------- */ -void falc_local_loop(pc300_t * card, int ch, int loop_on) +static void falc_local_loop(pc300_t * card, int ch, int loop_on) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -1522,7 +1523,7 @@ void falc_local_loop(pc300_t * card, int ch, int loop_on) * looped. They are originated by the FALC-LH transmitter. *---------------------------------------------------------------------------- */ -void falc_payload_loop(pc300_t * card, int ch, int loop_on) +static void falc_payload_loop(pc300_t * card, int ch, int loop_on) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1576,7 +1577,7 @@ void falc_payload_loop(pc300_t * card, int ch, int loop_on) * Description: Turns XLU bit off in the proper register *---------------------------------------------------------------------------- */ -void turn_off_xlu(pc300_t * card, int ch) +static void turn_off_xlu(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1597,7 +1598,7 @@ void turn_off_xlu(pc300_t * card, int ch) * Description: Turns XLD bit off in the proper register *---------------------------------------------------------------------------- */ -void turn_off_xld(pc300_t * card, int ch) +static void turn_off_xld(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1619,7 +1620,7 @@ void turn_off_xld(pc300_t * card, int ch) * to generate a LOOP activation code over a T1/E1 line. *---------------------------------------------------------------------------- */ -void falc_generate_loop_up_code(pc300_t * card, int ch) +static void falc_generate_loop_up_code(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1652,7 +1653,7 @@ void falc_generate_loop_up_code(pc300_t * card, int ch) * to generate a LOOP deactivation code over a T1/E1 line. *---------------------------------------------------------------------------- */ -void falc_generate_loop_down_code(pc300_t * card, int ch) +static void falc_generate_loop_down_code(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1682,7 +1683,7 @@ void falc_generate_loop_down_code(pc300_t * card, int ch) * it on the reception side. *---------------------------------------------------------------------------- */ -void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) +static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1729,7 +1730,7 @@ void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) * Description: This routine returns the bit error counter value *---------------------------------------------------------------------------- */ -ucshort falc_pattern_test_error(pc300_t * card, int ch) +static ucshort falc_pattern_test_error(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -1769,7 +1770,7 @@ cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx) netif_rx(skb); } -void cpc_tx_timeout(struct net_device *dev) +static void cpc_tx_timeout(struct net_device *dev) { pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; @@ -1797,7 +1798,7 @@ void cpc_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } -int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) +static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) { pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; @@ -1880,7 +1881,7 @@ int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } -void cpc_net_rx(struct net_device *dev) +static void cpc_net_rx(struct net_device *dev) { pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; @@ -2403,7 +2404,7 @@ static irqreturn_t cpc_intr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -void cpc_sca_status(pc300_t * card, int ch) +static void cpc_sca_status(pc300_t * card, int ch) { ucchar ilar; void __iomem *scabase = card->hw.scabase; @@ -2495,7 +2496,7 @@ void cpc_sca_status(pc300_t * card, int ch) } } -void cpc_falc_status(pc300_t * card, int ch) +static void cpc_falc_status(pc300_t * card, int ch) { pc300ch_t *chan = &card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -2523,7 +2524,7 @@ void cpc_falc_status(pc300_t * card, int ch) CPC_UNLOCK(card, flags); } -int cpc_change_mtu(struct net_device *dev, int new_mtu) +static int cpc_change_mtu(struct net_device *dev, int new_mtu) { if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU)) return -EINVAL; @@ -2531,7 +2532,7 @@ int cpc_change_mtu(struct net_device *dev, int new_mtu) return 0; } -int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; @@ -2856,7 +2857,7 @@ static int clock_rate_calc(uclong rate, uclong clock, int *br_io) } } -int ch_config(pc300dev_t * d) +static int ch_config(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -3004,7 +3005,7 @@ int ch_config(pc300dev_t * d) return 0; } -int rx_config(pc300dev_t * d) +static int rx_config(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3035,7 +3036,7 @@ int rx_config(pc300dev_t * d) return 0; } -int tx_config(pc300dev_t * d) +static int tx_config(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3098,7 +3099,7 @@ static int cpc_attach(struct net_device *dev, unsigned short encoding, return 0; } -void cpc_opench(pc300dev_t * d) +static void cpc_opench(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3116,7 +3117,7 @@ void cpc_opench(pc300dev_t * d) cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR)); } -void cpc_closech(pc300dev_t * d) +static void cpc_closech(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3173,7 +3174,7 @@ int cpc_open(struct net_device *dev) return 0; } -int cpc_close(struct net_device *dev) +static int cpc_close(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c index 8454bf6caaa7..52f26b9c69d2 100644 --- a/drivers/net/wan/pc300_tty.c +++ b/drivers/net/wan/pc300_tty.c @@ -112,10 +112,10 @@ typedef struct _st_cpc_tty_area { static struct tty_driver serial_drv; /* local variables */ -st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS]; +static st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS]; -int cpc_tty_cnt=0; /* number of intrfaces configured with MLPPP */ -int cpc_tty_unreg_flag = 0; +static int cpc_tty_cnt = 0; /* number of intrfaces configured with MLPPP */ +static int cpc_tty_unreg_flag = 0; /* TTY functions prototype */ static int cpc_tty_open(struct tty_struct *tty, struct file *flip); @@ -132,9 +132,9 @@ static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx); static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char); static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); -int pc300_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); -int pc300_tiocmget(struct tty_struct *, struct file *); +static int pc300_tiocmset(struct tty_struct *, struct file *, + unsigned int, unsigned int); +static int pc300_tiocmget(struct tty_struct *, struct file *); /* functions called by PC300 driver */ void cpc_tty_init(pc300dev_t *dev); @@ -538,8 +538,8 @@ static int cpc_tty_chars_in_buffer(struct tty_struct *tty) return(0); } -int pc300_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int pc300_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { st_cpc_tty_area *cpc_tty; @@ -565,7 +565,7 @@ int pc300_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -int pc300_tiocmget(struct tty_struct *tty, struct file *file) +static int pc300_tiocmget(struct tty_struct *tty, struct file *file) { unsigned int result; unsigned char status; diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index 3ac9a45b20fa..036adc4f8ba7 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -182,7 +182,7 @@ static char sdla_byte(struct net_device *dev, int addr) return(byte); } -void sdla_stop(struct net_device *dev) +static void sdla_stop(struct net_device *dev) { struct frad_local *flp; @@ -209,7 +209,7 @@ void sdla_stop(struct net_device *dev) } } -void sdla_start(struct net_device *dev) +static void sdla_start(struct net_device *dev) { struct frad_local *flp; @@ -247,7 +247,7 @@ void sdla_start(struct net_device *dev) * ***************************************************/ -int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2) +static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2) { unsigned long start, done, now; char resp, *temp; @@ -505,7 +505,7 @@ static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags, static int sdla_reconfig(struct net_device *dev); -int sdla_activate(struct net_device *slave, struct net_device *master) +static int sdla_activate(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -527,7 +527,7 @@ int sdla_activate(struct net_device *slave, struct net_device *master) return(0); } -int sdla_deactivate(struct net_device *slave, struct net_device *master) +static int sdla_deactivate(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -549,7 +549,7 @@ int sdla_deactivate(struct net_device *slave, struct net_device *master) return(0); } -int sdla_assoc(struct net_device *slave, struct net_device *master) +static int sdla_assoc(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -585,7 +585,7 @@ int sdla_assoc(struct net_device *slave, struct net_device *master) return(0); } -int sdla_deassoc(struct net_device *slave, struct net_device *master) +static int sdla_deassoc(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -613,7 +613,7 @@ int sdla_deassoc(struct net_device *slave, struct net_device *master) return(0); } -int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get) +static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get) { struct frad_local *flp; struct dlci_local *dlp; @@ -1324,7 +1324,7 @@ NOTE: This is rather a useless action right now, as the return(0); } -int sdla_change_mtu(struct net_device *dev, int new_mtu) +static int sdla_change_mtu(struct net_device *dev, int new_mtu) { struct frad_local *flp; @@ -1337,7 +1337,7 @@ int sdla_change_mtu(struct net_device *dev, int new_mtu) return(-EOPNOTSUPP); } -int sdla_set_config(struct net_device *dev, struct ifmap *map) +static int sdla_set_config(struct net_device *dev, struct ifmap *map) { struct frad_local *flp; int i; diff --git a/drivers/net/wan/sdladrv.c b/drivers/net/wan/sdladrv.c index c8bc6da57a41..7c2cf2e76300 100644 --- a/drivers/net/wan/sdladrv.c +++ b/drivers/net/wan/sdladrv.c @@ -642,9 +642,7 @@ int sdla_mapmem (sdlahw_t* hw, unsigned long addr) * Enable interrupt generation. */ -EXPORT_SYMBOL(sdla_inten); - -int sdla_inten (sdlahw_t* hw) +static int sdla_inten (sdlahw_t* hw) { unsigned port = hw->port; int tmp, i; @@ -698,8 +696,7 @@ int sdla_inten (sdlahw_t* hw) * Disable interrupt generation. */ -EXPORT_SYMBOL(sdla_intde); - +#if 0 int sdla_intde (sdlahw_t* hw) { unsigned port = hw->port; @@ -748,14 +745,13 @@ int sdla_intde (sdlahw_t* hw) } return 0; } +#endif /* 0 */ /*============================================================================ * Acknowledge SDLA hardware interrupt. */ -EXPORT_SYMBOL(sdla_intack); - -int sdla_intack (sdlahw_t* hw) +static int sdla_intack (sdlahw_t* hw) { unsigned port = hw->port; int tmp; @@ -827,8 +823,7 @@ void read_S514_int_stat (sdlahw_t* hw, u32* int_status) * Generate an interrupt to adapter's CPU. */ -EXPORT_SYMBOL(sdla_intr); - +#if 0 int sdla_intr (sdlahw_t* hw) { unsigned port = hw->port; @@ -863,6 +858,7 @@ int sdla_intr (sdlahw_t* hw) } return 0; } +#endif /* 0 */ /*============================================================================ * Execute Adapter Command. diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index b56a7b516d24..3731b22f6757 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -221,7 +221,7 @@ static void sppp_clear_timeout(struct sppp *p) * here. */ -void sppp_input (struct net_device *dev, struct sk_buff *skb) +static void sppp_input (struct net_device *dev, struct sk_buff *skb) { struct ppp_header *h; struct sppp *sp = (struct sppp *)sppp_of(dev); @@ -355,8 +355,6 @@ done: return; } -EXPORT_SYMBOL(sppp_input); - /* * Handle transmit packets. */ @@ -990,7 +988,7 @@ EXPORT_SYMBOL(sppp_reopen); * the mtu is out of range. */ -int sppp_change_mtu(struct net_device *dev, int new_mtu) +static int sppp_change_mtu(struct net_device *dev, int new_mtu) { if(new_mtu<128||new_mtu>PPP_MTU||(dev->flags&IFF_UP)) return -EINVAL; @@ -998,8 +996,6 @@ int sppp_change_mtu(struct net_device *dev, int new_mtu) return 0; } -EXPORT_SYMBOL(sppp_change_mtu); - /** * sppp_do_ioctl - Ioctl handler for ppp/hdlc * @dev: Device subject to ioctl @@ -1456,7 +1452,7 @@ static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_t return 0; } -struct packet_type sppp_packet_type = { +static struct packet_type sppp_packet_type = { .type = __constant_htons(ETH_P_WAN_PPP), .func = sppp_rcv, }; diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h index 6621df86a748..12fe6b0bfcff 100644 --- a/include/linux/cycx_drv.h +++ b/include/linux/cycx_drv.h @@ -60,6 +60,5 @@ extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len); extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len); extern int cycx_exec(void __iomem *addr); -extern void cycx_inten(struct cycx_hw *hw); extern void cycx_intr(struct cycx_hw *hw); #endif /* _CYCX_DRV_H */ diff --git a/include/linux/sdladrv.h b/include/linux/sdladrv.h index 78f634007fc6..c85e103d5e7b 100644 --- a/include/linux/sdladrv.h +++ b/include/linux/sdladrv.h @@ -52,12 +52,8 @@ typedef struct sdlahw extern int sdla_setup (sdlahw_t* hw, void* sfm, unsigned len); extern int sdla_down (sdlahw_t* hw); -extern int sdla_inten (sdlahw_t* hw); -extern int sdla_intde (sdlahw_t* hw); -extern int sdla_intack (sdlahw_t* hw); extern void S514_intack (sdlahw_t* hw, u32 int_status); extern void read_S514_int_stat (sdlahw_t* hw, u32* int_status); -extern int sdla_intr (sdlahw_t* hw); extern int sdla_mapmem (sdlahw_t* hw, unsigned long addr); extern int sdla_peek (sdlahw_t* hw, unsigned long addr, void* buf, unsigned len); diff --git a/include/net/syncppp.h b/include/net/syncppp.h index 614cb6ba564e..877efa434700 100644 --- a/include/net/syncppp.h +++ b/include/net/syncppp.h @@ -86,7 +86,6 @@ static inline struct sppp *sppp_of(struct net_device *dev) void sppp_attach (struct ppp_device *pd); void sppp_detach (struct net_device *dev); -void sppp_input (struct net_device *dev, struct sk_buff *m); int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd); struct sk_buff *sppp_dequeue (struct net_device *dev); int sppp_isempty (struct net_device *dev); -- cgit v1.2.3 From 387d890db88b4eb7c1dd55a2a0c16d6f0dccc7ad Mon Sep 17 00:00:00 2001 From: "viro@ZenIV.linux.org.uk" Date: Fri, 9 Sep 2005 17:22:14 +0100 Subject: [PATCH] lne390 bogus casts We already have the iomem pointer we need... Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/lne390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c index 27f0d8ac4c40..309d254842cf 100644 --- a/drivers/net/lne390.c +++ b/drivers/net/lne390.c @@ -298,7 +298,7 @@ static int __init lne390_probe1(struct net_device *dev, int ioaddr) return 0; unmap: if (ei_status.reg0) - iounmap((void *)dev->mem_start); + iounmap(ei_status.mem); cleanup: free_irq(dev->irq, dev); return ret; -- cgit v1.2.3 From 7a700fafbed55eee2cc766fbe47cf68e229da281 Mon Sep 17 00:00:00 2001 From: "viro@ZenIV.linux.org.uk" Date: Fri, 9 Sep 2005 20:40:23 +0100 Subject: [PATCH] C99 initializers in ray_cs.c Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/wireless/ray_cs.c | 46 +++++++++++++++++++++---------------------- 1 file changed, 23 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index e9c5ea0f5535..70fd6fd8feb9 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -1649,28 +1649,28 @@ static iw_stats * ray_get_wireless_stats(struct net_device * dev) */ static const iw_handler ray_handler[] = { - [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) ray_commit, - [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) ray_get_name, - [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) ray_set_freq, - [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) ray_get_freq, - [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) ray_set_mode, - [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) ray_get_mode, - [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) ray_get_range, + [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) ray_commit, + [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) ray_get_name, + [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) ray_set_freq, + [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) ray_get_freq, + [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) ray_set_mode, + [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) ray_get_mode, + [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) ray_get_range, #ifdef WIRELESS_SPY - [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_set_spy, - [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_get_spy, - [SIOCSIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_set_thrspy, - [SIOCGIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_get_thrspy, + [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, + [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, + [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, + [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, #endif /* WIRELESS_SPY */ - [SIOCGIWAP -SIOCIWFIRST] (iw_handler) ray_get_wap, - [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) ray_set_essid, - [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) ray_get_essid, - [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) ray_set_rate, - [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) ray_get_rate, - [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) ray_set_rts, - [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) ray_get_rts, - [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) ray_set_frag, - [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) ray_get_frag, + [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) ray_get_wap, + [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) ray_set_essid, + [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) ray_get_essid, + [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) ray_set_rate, + [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) ray_get_rate, + [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) ray_set_rts, + [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) ray_get_rts, + [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) ray_set_frag, + [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) ray_get_frag, }; #define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */ @@ -1678,9 +1678,9 @@ static const iw_handler ray_handler[] = { #define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */ static const iw_handler ray_private_handler[] = { - [0] (iw_handler) ray_set_framing, - [1] (iw_handler) ray_get_framing, - [3] (iw_handler) ray_get_country, + [0] = (iw_handler) ray_set_framing, + [1] = (iw_handler) ray_get_framing, + [3] = (iw_handler) ray_get_country, }; static const struct iw_priv_args ray_private_args[] = { -- cgit v1.2.3 From 43ec6e95e4d8a73afc2405a44b955c380aeeb65a Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Tue, 23 Aug 2005 10:30:29 -0700 Subject: [PATCH] mii: Add test for GigE support Signed-off-by: Dale Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/mii.c | 15 +++++++++++++++ include/linux/mii.h | 1 + 2 files changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/net/mii.c b/drivers/net/mii.c index c33cb3dc942b..e42aa797f08b 100644 --- a/drivers/net/mii.c +++ b/drivers/net/mii.c @@ -207,6 +207,20 @@ int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd) return 0; } +int mii_check_gmii_support(struct mii_if_info *mii) +{ + int reg; + + reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); + if (reg & BMSR_ESTATEN) { + reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS); + if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) + return 1; + } + + return 0; +} + int mii_link_ok (struct mii_if_info *mii) { /* first, a dummy read, needed to latch some MII phys */ @@ -394,5 +408,6 @@ EXPORT_SYMBOL(mii_ethtool_gset); EXPORT_SYMBOL(mii_ethtool_sset); EXPORT_SYMBOL(mii_check_link); EXPORT_SYMBOL(mii_check_media); +EXPORT_SYMBOL(mii_check_gmii_support); EXPORT_SYMBOL(generic_mii_ioctl); diff --git a/include/linux/mii.h b/include/linux/mii.h index 9b8d0476988a..68f5a0f392dd 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -158,6 +158,7 @@ extern int mii_link_ok (struct mii_if_info *mii); extern int mii_nway_restart (struct mii_if_info *mii); extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); +extern int mii_check_gmii_support(struct mii_if_info *mii); extern void mii_check_link (struct mii_if_info *mii); extern unsigned int mii_check_media (struct mii_if_info *mii, unsigned int ok_to_print, -- cgit v1.2.3 From f89efd523b25cc1702e074dafdcac283da657002 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 9 Sep 2005 12:10:10 -0700 Subject: [PATCH] Add rapidio net driver Adds an "Ethernet" driver which sends Ethernet packets over the standard RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell access. Signed-off-by: Matt Porter Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 14 ++ drivers/net/Makefile | 1 + drivers/net/rionet.c | 574 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 589 insertions(+) create mode 100644 drivers/net/rionet.c (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 54fff9c2e802..82603e419d76 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2235,6 +2235,20 @@ config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" depends on PPC_ISERIES +config RIONET + tristate "RapidIO Ethernet over messaging driver support" + depends on NETDEVICES && RAPIDIO + +config RIONET_TX_SIZE + int "Number of outbound queue entries" + depends on RIONET + default "128" + +config RIONET_RX_SIZE + int "Number of inbound queue entries" + depends on RIONET + default "128" + config FDDI bool "FDDI driver support" depends on (PCI || EISA) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 8645c843cf4d..e6acba68923a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o +obj-$(CONFIG_RIONET) += rionet.o # # end link order section diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c new file mode 100644 index 000000000000..12cde0604580 --- /dev/null +++ b/drivers/net/rionet.c @@ -0,0 +1,574 @@ +/* + * rionet - Ethernet driver over RapidIO messaging services + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "rionet" +#define DRV_VERSION "0.2" +#define DRV_AUTHOR "Matt Porter " +#define DRV_DESC "Ethernet over RapidIO" + +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); + +#define RIONET_DEFAULT_MSGLEVEL \ + (NETIF_MSG_DRV | \ + NETIF_MSG_LINK | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + +#define RIONET_DOORBELL_JOIN 0x1000 +#define RIONET_DOORBELL_LEAVE 0x1001 + +#define RIONET_MAILBOX 0 + +#define RIONET_TX_RING_SIZE CONFIG_RIONET_TX_SIZE +#define RIONET_RX_RING_SIZE CONFIG_RIONET_RX_SIZE + +static LIST_HEAD(rionet_peers); + +struct rionet_private { + struct rio_mport *mport; + struct sk_buff *rx_skb[RIONET_RX_RING_SIZE]; + struct sk_buff *tx_skb[RIONET_TX_RING_SIZE]; + struct net_device_stats stats; + int rx_slot; + int tx_slot; + int tx_cnt; + int ack_slot; + spinlock_t lock; + spinlock_t tx_lock; + u32 msg_enable; +}; + +struct rionet_peer { + struct list_head node; + struct rio_dev *rdev; + struct resource *res; +}; + +static int rionet_check = 0; +static int rionet_capable = 1; + +/* + * This is a fast lookup table for for translating TX + * Ethernet packets into a destination RIO device. It + * could be made into a hash table to save memory depending + * on system trade-offs. + */ +static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES]; + +#define is_rionet_capable(pef, src_ops, dst_ops) \ + ((pef & RIO_PEF_INB_MBOX) && \ + (pef & RIO_PEF_INB_DOORBELL) && \ + (src_ops & RIO_SRC_OPS_DOORBELL) && \ + (dst_ops & RIO_DST_OPS_DOORBELL)) +#define dev_rionet_capable(dev) \ + is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops) + +#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001) +#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4)) + +static struct net_device_stats *rionet_stats(struct net_device *ndev) +{ + struct rionet_private *rnet = ndev->priv; + return &rnet->stats; +} + +static int rionet_rx_clean(struct net_device *ndev) +{ + int i; + int error = 0; + struct rionet_private *rnet = ndev->priv; + void *data; + + i = rnet->rx_slot; + + do { + if (!rnet->rx_skb[i]) + continue; + + if (!(data = rio_get_inb_message(rnet->mport, RIONET_MAILBOX))) + break; + + rnet->rx_skb[i]->data = data; + skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE); + rnet->rx_skb[i]->dev = ndev; + rnet->rx_skb[i]->protocol = + eth_type_trans(rnet->rx_skb[i], ndev); + error = netif_rx(rnet->rx_skb[i]); + + if (error == NET_RX_DROP) { + rnet->stats.rx_dropped++; + } else if (error == NET_RX_BAD) { + if (netif_msg_rx_err(rnet)) + printk(KERN_WARNING "%s: bad rx packet\n", + DRV_NAME); + rnet->stats.rx_errors++; + } else { + rnet->stats.rx_packets++; + rnet->stats.rx_bytes += RIO_MAX_MSG_SIZE; + } + + } while ((i = (i + 1) % RIONET_RX_RING_SIZE) != rnet->rx_slot); + + return i; +} + +static void rionet_rx_fill(struct net_device *ndev, int end) +{ + int i; + struct rionet_private *rnet = ndev->priv; + + i = rnet->rx_slot; + do { + rnet->rx_skb[i] = dev_alloc_skb(RIO_MAX_MSG_SIZE); + + if (!rnet->rx_skb[i]) + break; + + rio_add_inb_buffer(rnet->mport, RIONET_MAILBOX, + rnet->rx_skb[i]->data); + } while ((i = (i + 1) % RIONET_RX_RING_SIZE) != end); + + rnet->rx_slot = i; +} + +static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev, + struct rio_dev *rdev) +{ + struct rionet_private *rnet = ndev->priv; + + rio_add_outb_message(rnet->mport, rdev, 0, skb->data, skb->len); + rnet->tx_skb[rnet->tx_slot] = skb; + + rnet->stats.tx_packets++; + rnet->stats.tx_bytes += skb->len; + + if (++rnet->tx_cnt == RIONET_TX_RING_SIZE) + netif_stop_queue(ndev); + + ++rnet->tx_slot; + rnet->tx_slot &= (RIONET_TX_RING_SIZE - 1); + + if (netif_msg_tx_queued(rnet)) + printk(KERN_INFO "%s: queued skb %8.8x len %8.8x\n", DRV_NAME, + (u32) skb, skb->len); + + return 0; +} + +static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + int i; + struct rionet_private *rnet = ndev->priv; + struct ethhdr *eth = (struct ethhdr *)skb->data; + u16 destid; + unsigned long flags; + + local_irq_save(flags); + if (!spin_trylock(&rnet->tx_lock)) { + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } + + if ((rnet->tx_cnt + 1) > RIONET_TX_RING_SIZE) { + netif_stop_queue(ndev); + spin_unlock_irqrestore(&rnet->tx_lock, flags); + printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n", + ndev->name); + return NETDEV_TX_BUSY; + } + + if (eth->h_dest[0] & 0x01) { + for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) + if (rionet_active[i]) + rionet_queue_tx_msg(skb, ndev, + rionet_active[i]); + } else if (RIONET_MAC_MATCH(eth->h_dest)) { + destid = RIONET_GET_DESTID(eth->h_dest); + if (rionet_active[destid]) + rionet_queue_tx_msg(skb, ndev, rionet_active[destid]); + } + + spin_unlock_irqrestore(&rnet->tx_lock, flags); + + return 0; +} + +static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u16 tid, + u16 info) +{ + struct net_device *ndev = dev_id; + struct rionet_private *rnet = ndev->priv; + struct rionet_peer *peer; + + if (netif_msg_intr(rnet)) + printk(KERN_INFO "%s: doorbell sid %4.4x tid %4.4x info %4.4x", + DRV_NAME, sid, tid, info); + if (info == RIONET_DOORBELL_JOIN) { + if (!rionet_active[sid]) { + list_for_each_entry(peer, &rionet_peers, node) { + if (peer->rdev->destid == sid) + rionet_active[sid] = peer->rdev; + } + rio_mport_send_doorbell(mport, sid, + RIONET_DOORBELL_JOIN); + } + } else if (info == RIONET_DOORBELL_LEAVE) { + rionet_active[sid] = NULL; + } else { + if (netif_msg_intr(rnet)) + printk(KERN_WARNING "%s: unhandled doorbell\n", + DRV_NAME); + } +} + +static void rionet_inb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot) +{ + int n; + struct net_device *ndev = dev_id; + struct rionet_private *rnet = (struct rionet_private *)ndev->priv; + + if (netif_msg_intr(rnet)) + printk(KERN_INFO "%s: inbound message event, mbox %d slot %d\n", + DRV_NAME, mbox, slot); + + spin_lock(&rnet->lock); + if ((n = rionet_rx_clean(ndev)) != rnet->rx_slot) + rionet_rx_fill(ndev, n); + spin_unlock(&rnet->lock); +} + +static void rionet_outb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot) +{ + struct net_device *ndev = dev_id; + struct rionet_private *rnet = ndev->priv; + + spin_lock(&rnet->lock); + + if (netif_msg_intr(rnet)) + printk(KERN_INFO + "%s: outbound message event, mbox %d slot %d\n", + DRV_NAME, mbox, slot); + + while (rnet->tx_cnt && (rnet->ack_slot != slot)) { + /* dma unmap single */ + dev_kfree_skb_irq(rnet->tx_skb[rnet->ack_slot]); + rnet->tx_skb[rnet->ack_slot] = NULL; + ++rnet->ack_slot; + rnet->ack_slot &= (RIONET_TX_RING_SIZE - 1); + rnet->tx_cnt--; + } + + if (rnet->tx_cnt < RIONET_TX_RING_SIZE) + netif_wake_queue(ndev); + + spin_unlock(&rnet->lock); +} + +static int rionet_open(struct net_device *ndev) +{ + int i, rc = 0; + struct rionet_peer *peer, *tmp; + u32 pwdcsr; + struct rionet_private *rnet = ndev->priv; + + if (netif_msg_ifup(rnet)) + printk(KERN_INFO "%s: open\n", DRV_NAME); + + if ((rc = rio_request_inb_dbell(rnet->mport, + (void *)ndev, + RIONET_DOORBELL_JOIN, + RIONET_DOORBELL_LEAVE, + rionet_dbell_event)) < 0) + goto out; + + if ((rc = rio_request_inb_mbox(rnet->mport, + (void *)ndev, + RIONET_MAILBOX, + RIONET_RX_RING_SIZE, + rionet_inb_msg_event)) < 0) + goto out; + + if ((rc = rio_request_outb_mbox(rnet->mport, + (void *)ndev, + RIONET_MAILBOX, + RIONET_TX_RING_SIZE, + rionet_outb_msg_event)) < 0) + goto out; + + /* Initialize inbound message ring */ + for (i = 0; i < RIONET_RX_RING_SIZE; i++) + rnet->rx_skb[i] = NULL; + rnet->rx_slot = 0; + rionet_rx_fill(ndev, 0); + + rnet->tx_slot = 0; + rnet->tx_cnt = 0; + rnet->ack_slot = 0; + + netif_carrier_on(ndev); + netif_start_queue(ndev); + + list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { + if (!(peer->res = rio_request_outb_dbell(peer->rdev, + RIONET_DOORBELL_JOIN, + RIONET_DOORBELL_LEAVE))) + { + printk(KERN_ERR "%s: error requesting doorbells\n", + DRV_NAME); + continue; + } + + /* + * If device has initialized inbound doorbells, + * send a join message + */ + rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr); + if (pwdcsr & RIO_DOORBELL_AVAIL) + rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN); + } + + out: + return rc; +} + +static int rionet_close(struct net_device *ndev) +{ + struct rionet_private *rnet = (struct rionet_private *)ndev->priv; + struct rionet_peer *peer, *tmp; + int i; + + if (netif_msg_ifup(rnet)) + printk(KERN_INFO "%s: close\n", DRV_NAME); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + for (i = 0; i < RIONET_RX_RING_SIZE; i++) + if (rnet->rx_skb[i]) + kfree_skb(rnet->rx_skb[i]); + + list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { + if (rionet_active[peer->rdev->destid]) { + rio_send_doorbell(peer->rdev, RIONET_DOORBELL_LEAVE); + rionet_active[peer->rdev->destid] = NULL; + } + rio_release_outb_dbell(peer->rdev, peer->res); + } + + rio_release_inb_dbell(rnet->mport, RIONET_DOORBELL_JOIN, + RIONET_DOORBELL_LEAVE); + rio_release_inb_mbox(rnet->mport, RIONET_MAILBOX); + rio_release_outb_mbox(rnet->mport, RIONET_MAILBOX); + + return 0; +} + +static void rionet_remove(struct rio_dev *rdev) +{ + struct net_device *ndev = NULL; + struct rionet_peer *peer, *tmp; + + unregister_netdev(ndev); + kfree(ndev); + + list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { + list_del(&peer->node); + kfree(peer); + } +} + +static void rionet_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + struct rionet_private *rnet = ndev->priv; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "n/a"); + strcpy(info->bus_info, rnet->mport->name); +} + +static u32 rionet_get_msglevel(struct net_device *ndev) +{ + struct rionet_private *rnet = ndev->priv; + + return rnet->msg_enable; +} + +static void rionet_set_msglevel(struct net_device *ndev, u32 value) +{ + struct rionet_private *rnet = ndev->priv; + + rnet->msg_enable = value; +} + +static struct ethtool_ops rionet_ethtool_ops = { + .get_drvinfo = rionet_get_drvinfo, + .get_msglevel = rionet_get_msglevel, + .set_msglevel = rionet_set_msglevel, + .get_link = ethtool_op_get_link, +}; + +static int rionet_setup_netdev(struct rio_mport *mport) +{ + int rc = 0; + struct net_device *ndev = NULL; + struct rionet_private *rnet; + u16 device_id; + + /* Allocate our net_device structure */ + ndev = alloc_etherdev(sizeof(struct rionet_private)); + if (ndev == NULL) { + printk(KERN_INFO "%s: could not allocate ethernet device.\n", + DRV_NAME); + rc = -ENOMEM; + goto out; + } + + /* Set up private area */ + rnet = (struct rionet_private *)ndev->priv; + rnet->mport = mport; + + /* Set the default MAC address */ + device_id = rio_local_get_device_id(mport); + ndev->dev_addr[0] = 0x00; + ndev->dev_addr[1] = 0x01; + ndev->dev_addr[2] = 0x00; + ndev->dev_addr[3] = 0x01; + ndev->dev_addr[4] = device_id >> 8; + ndev->dev_addr[5] = device_id & 0xff; + + /* Fill in the driver function table */ + ndev->open = &rionet_open; + ndev->hard_start_xmit = &rionet_start_xmit; + ndev->stop = &rionet_close; + ndev->get_stats = &rionet_stats; + ndev->mtu = RIO_MAX_MSG_SIZE - 14; + ndev->features = NETIF_F_LLTX; + SET_ETHTOOL_OPS(ndev, &rionet_ethtool_ops); + + SET_MODULE_OWNER(ndev); + + spin_lock_init(&rnet->lock); + spin_lock_init(&rnet->tx_lock); + + rnet->msg_enable = RIONET_DEFAULT_MSGLEVEL; + + rc = register_netdev(ndev); + if (rc != 0) + goto out; + + printk("%s: %s %s Version %s, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, + DRV_NAME, + DRV_DESC, + DRV_VERSION, + ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], + ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); + + out: + return rc; +} + +/* + * XXX Make multi-net safe + */ +static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) +{ + int rc = -ENODEV; + u32 lpef, lsrc_ops, ldst_ops; + struct rionet_peer *peer; + + /* If local device is not rionet capable, give up quickly */ + if (!rionet_capable) + goto out; + + /* + * First time through, make sure local device is rionet + * capable, setup netdev, and set flags so this is skipped + * on later probes + */ + if (!rionet_check) { + rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef); + rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR, + &lsrc_ops); + rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR, + &ldst_ops); + if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) { + printk(KERN_ERR + "%s: local device is not network capable\n", + DRV_NAME); + rionet_check = 1; + rionet_capable = 0; + goto out; + } + + rc = rionet_setup_netdev(rdev->net->hport); + rionet_check = 1; + } + + /* + * If the remote device has mailbox/doorbell capabilities, + * add it to the peer list. + */ + if (dev_rionet_capable(rdev)) { + if (!(peer = kmalloc(sizeof(struct rionet_peer), GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + peer->rdev = rdev; + list_add_tail(&peer->node, &rionet_peers); + } + + out: + return rc; +} + +static struct rio_device_id rionet_id_table[] = { + {RIO_DEVICE(RIO_ANY_ID, RIO_ANY_ID)} +}; + +static struct rio_driver rionet_driver = { + .name = "rionet", + .id_table = rionet_id_table, + .probe = rionet_probe, + .remove = rionet_remove, +}; + +static int __init rionet_init(void) +{ + return rio_register_driver(&rionet_driver); +} + +static void __exit rionet_exit(void) +{ + rio_unregister_driver(&rionet_driver); +} + +module_init(rionet_init); +module_exit(rionet_exit); -- cgit v1.2.3 From 24ee0a6d7b0a52b140c880aae24c255de3b4a9a1 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 12 Sep 2005 12:15:43 -0500 Subject: [IA64] Cleanup use of various #defines related to nodes Some of the SN code & #defines related to compact nodes & IO discovery have gotten stale over the years. This patch attempts to clean them up. Some of the various SN MAX_xxx #defines were also unclear & misused. The primary changes are: - use MAX_NUMNODES. This is the generic linux #define for the number of nodes that are known to the generic kernel. Arrays & loops for constructs that are 1:1 with linux-defined nodes should use the linux #define - not an SN equivalent. - use MAX_COMPACT_NODES for MAX_NUMNODES + NUM_TIOS. This is the number of nodes in the SSI system. Compact nodes are a hack to get around the IA64 architectural limit of 256 nodes. Large SGI systems have more than 256 nodes. When we upgrade to ACPI3.0, I _hope_ that all nodes will be real nodes that are known to the generic kernel. That will allow us to delete the notion of "compact nodes". - add MAX_NUMALINK_NODES for the total number of nodes that are in the numalink domain - all partitions. - simplified (understandable) scan_for_ionodes() - small amount of cleanup related to cnodes Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/io_init.c | 4 +- arch/ia64/sn/kernel/setup.c | 160 ++++++++++++------------------------ arch/ia64/sn/kernel/sn2/sn_hwperf.c | 4 +- arch/ia64/sn/kernel/tiocx.c | 5 +- arch/ia64/sn/kernel/xpc_partition.c | 2 +- drivers/char/snsc.c | 4 +- include/asm-ia64/sn/arch.h | 36 +++++--- include/asm-ia64/sn/io.h | 2 +- include/asm-ia64/sn/klconfig.h | 34 +------- include/asm-ia64/sn/sn_cpuid.h | 3 - include/asm-ia64/sn/sn_sal.h | 12 +-- include/asm-ia64/sn/xp.h | 2 +- 12 files changed, 92 insertions(+), 176 deletions(-) (limited to 'drivers') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 906622d9f933..b4f5053f5e1b 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -22,8 +22,6 @@ #include "xtalk/hubdev.h" #include "xtalk/xwidgetdev.h" -nasid_t master_nasid = INVALID_NASID; /* Partition Master */ - static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void) * Get SGI Specific HUB chipset information. * Inform Prom that this kernel can support domain bus numbering. */ - for (i = 0; i < numionodes; i++) { + for (i = 0; i < num_cnodes; i++) { hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); nasid = cnodeid_to_nasid(i); hubdev->max_segment_number = 0xffffffff; diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 6f8c5883716b..0fb579ef18c2 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -59,8 +59,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu); #define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */ -lboard_t *root_lboard[MAX_COMPACT_NODES]; - extern void bte_init_node(nodepda_t *, cnodeid_t); extern void sn_timer_init(void); @@ -97,15 +95,15 @@ u8 sn_region_size; EXPORT_SYMBOL(sn_region_size); int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ -short physical_node_map[MAX_PHYSNODE_ID]; +short physical_node_map[MAX_NUMALINK_NODES]; static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS]; EXPORT_SYMBOL(physical_node_map); -int numionodes; +int num_cnodes; static void sn_init_pdas(char **); -static void scan_for_ionodes(void); +static void build_cnode_tables(void); static nodepda_t *nodepdaindr[MAX_COMPACT_NODES]; @@ -139,19 +137,6 @@ extern char drive_info[4 * 16]; char drive_info[4 * 16]; #endif -/* - * Get nasid of current cpu early in boot before nodepda is initialized - */ -static int -boot_get_nasid(void) -{ - int nasid; - - if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL)) - BUG(); - return nasid; -} - /* * This routine can only be used during init, since * smp_boot_data is an init data structure. @@ -223,7 +208,6 @@ void __init early_sn_setup(void) } extern int platform_intr_list[]; -extern nasid_t master_nasid; static int __initdata shub_1_1_found = 0; /* @@ -269,7 +253,6 @@ static void __init sn_check_for_wars(void) void __init sn_setup(char **cmdline_p) { long status, ticks_per_sec, drift; - int pxm; u32 version = sn_sal_rev(); extern void sn_cpu_init(void); @@ -300,11 +283,10 @@ void __init sn_setup(char **cmdline_p) MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY; - memset(physical_node_map, -1, sizeof(physical_node_map)); - for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++) - if (pxm_to_nid_map[pxm] != -1) - physical_node_map[pxm_to_nasid(pxm)] = - pxm_to_nid_map[pxm]; + /* + * Build the tables for managing cnodes. + */ + build_cnode_tables(); /* * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard @@ -319,8 +301,6 @@ void __init sn_setup(char **cmdline_p) printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); - master_nasid = boot_get_nasid(); - status = ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, &drift); @@ -378,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p) { cnodeid_t cnode; - memset(sn_cnodeid_to_nasid, -1, - sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - for_each_online_node(cnode) - sn_cnodeid_to_nasid[cnode] = - pxm_to_nasid(nid_to_pxm_map[cnode]); - - numionodes = num_online_nodes(); - scan_for_ionodes(); - /* * Allocate & initalize the nodepda for each node. */ @@ -402,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Allocate & initialize nodepda for TIOs. For now, put them on node 0. */ - for (cnode = num_online_nodes(); cnode < numionodes; cnode++) { + for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) { nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); @@ -411,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Now copy the array of nodepda pointers to each nodepda. */ - for (cnode = 0; cnode < numionodes; cnode++) + for (cnode = 0; cnode < num_cnodes; cnode++) memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr, sizeof(nodepdaindr)); @@ -428,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p) * Initialize the per node hubdev. This includes IO Nodes and * headless/memless nodes. */ - for (cnode = 0; cnode < numionodes; cnode++) { + for (cnode = 0; cnode < num_cnodes; cnode++) { hubdev_init_node(nodepdaindr[cnode], cnode); } } @@ -553,87 +524,58 @@ void __init sn_cpu_init(void) } /* - * Scan klconfig for ionodes. Add the nasids to the - * physical_node_map and the pda and increment numionodes. + * Build tables for converting between NASIDs and cnodes. */ +static inline int __init board_needs_cnode(int type) +{ + return (type == KLTYPE_SNIA || type == KLTYPE_TIO); +} -static void __init scan_for_ionodes(void) +void __init build_cnode_tables(void) { - int nasid = 0; + int nasid; + int node; lboard_t *brd; - /* fakeprom does not support klgraph */ - if (IS_RUNNING_ON_FAKE_PROM()) - return; - - /* Setup ionodes with memory */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - char *klgraph_header; - cnodeid_t cnodeid; - - if (physical_node_map[nasid] == -1) - continue; + memset(physical_node_map, -1, sizeof(physical_node_map)); + memset(sn_cnodeid_to_nasid, -1, + sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - cnodeid = -1; - klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid)); - if (!klgraph_header) { - BUG(); /* All nodes must have klconfig tables! */ - } - cnodeid = nasid_to_cnodeid(nasid); - root_lboard[cnodeid] = (lboard_t *) - NODE_OFFSET_TO_LBOARD((nasid), - ((kl_config_hdr_t - *) (klgraph_header))-> - ch_board_info); + /* + * First populate the tables with C/M bricks. This ensures that + * cnode == node for all C & M bricks. + */ + for_each_online_node(node) { + nasid = pxm_to_nasid(nid_to_pxm_map[node]); + sn_cnodeid_to_nasid[node] = nasid; + physical_node_map[nasid] = node; } - /* Scan headless/memless IO Nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_SNIA); - if (brd) { - brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */ - if (!brd) - continue; - } - - brd = find_lboard_any(brd, KLTYPE_SNIA); + /* + * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node + * limit on the number of nodes, we can't use the generic node numbers + * for this. Note that num_cnodes is incremented below as TIOs or + * headless/memoryless nodes are discovered. + */ + num_cnodes = num_online_nodes(); - while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_SNIA); - } - } + /* fakeprom does not support klgraph */ + if (IS_RUNNING_ON_FAKE_PROM()) + return; - /* Scan for TIO nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_TIO); + /* Find TIOs & headless/memoryless nodes and add them to the tables */ + for_each_online_node(node) { + kl_config_hdr_t *klgraph_header; + nasid = cnodeid_to_nasid(node); + if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL) + BUG(); + brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info); while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_TIO); + if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) { + sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid; + physical_node_map[brd->brd_nasid] = num_cnodes++; + } + brd = find_lboard_next(brd); } } } diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 0513aacac8c1..6c6fbca3229c 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d) for_each_online_cpu(j) { seq_printf(s, j ? ":%d" : ", dist %d", node_distance( - cpuid_to_cnodeid(i), - cpuid_to_cnodeid(j))); + cpu_to_node(i), + cpu_to_node(j))); } seq_putc(s, '\n'); } diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index b45db5133f55..7e9764a69dc8 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -486,11 +486,10 @@ static int __init tiocx_init(void) bus_register(&tiocx_bus_type); - for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { + for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) { nasid_t nasid; - if ((nasid = cnodeid_to_nasid(cnodeid)) < 0) - break; /* No more nasids .. bail out of loop */ + nasid = cnodeid_to_nasid(cnodeid); if ((nasid & 0x1) && is_fpga_brick(nasid)) { struct hubdev_info *hubdev; diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 578265ea9e67..72ef330fb784 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -44,7 +44,7 @@ static u64 xpc_sh2_IPI_access3; /* original protection values for each node */ -u64 xpc_prot_vec[MAX_COMPACT_NODES]; +u64 xpc_prot_vec[MAX_NUMNODES]; /* this partition's reserved page */ diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c index 261a41bf6d02..a025a89ea70a 100644 --- a/drivers/char/snsc.c +++ b/drivers/char/snsc.c @@ -377,7 +377,7 @@ scdrv_init(void) dev_t first_dev, dev; nasid_t event_nasid = ia64_sn_get_console_nasid(); - if (alloc_chrdev_region(&first_dev, 0, numionodes, + if (alloc_chrdev_region(&first_dev, 0, num_cnodes, SYSCTL_BASENAME) < 0) { printk("%s: failed to register SN system controller device\n", __FUNCTION__); @@ -385,7 +385,7 @@ scdrv_init(void) } snsc_class = class_create(THIS_MODULE, SYSCTL_BASENAME); - for (cnode = 0; cnode < numionodes; cnode++) { + for (cnode = 0; cnode < num_cnodes; cnode++) { geoid = cnodeid_get_geoid(cnode); devnamep = devname; format_module_id(devnamep, geo_module(geoid), diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h index ab827d298569..8fce5a6db951 100644 --- a/include/asm-ia64/sn/arch.h +++ b/include/asm-ia64/sn/arch.h @@ -17,6 +17,32 @@ #include #include +/* + * This is the maximum number of NUMALINK nodes that can be part of a single + * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in + * remote partitions are NOT included in this number. + * The number of compact nodes cannot exceed size of a coherency domain. + * The purpose of this define is to specify a node count that includes + * all C/M/TIO nodes in an SSI system. + * + * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes. + * + * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade + * to ACPI3.0, this limit will be removed. The notion of "compact nodes" + * should be deleted and TIOs should be included in MAX_NUMNODES. + */ +#define MAX_COMPACT_NODES 512 + +/* + * Maximum number of nodes in all partitions and in all coherency domains. + * This is the total number of nodes accessible in the numalink fabric. It + * includes all C & M bricks, plus all TIOs. + * + * This value is also the value of the maximum number of NASIDs in the numalink + * fabric. + */ +#define MAX_NUMALINK_NODES 2048 + /* * The following defines attributes of the HUB chip. These attributes are * frequently referenced. They are kept in the per-cpu data areas of each cpu. @@ -40,15 +66,6 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); #define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found) -/* - * This is the maximum number of nodes that can be part of a kernel. - * Effectively, it's the maximum number of compact node ids (cnodeid_t). - * This is not necessarily the same as MAX_NASIDS. - */ -#define MAX_COMPACT_NODES 2048 -#define CPUS_PER_NODE 4 - - /* * Compact node ID to nasid mappings kept in the per-cpu data areas of each * cpu. @@ -57,7 +74,6 @@ DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]); #define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) - extern u8 sn_partition_id; extern u8 sn_system_size; extern u8 sn_sharing_domain_size; diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h index 42209733f6b1..ac30c747c5ab 100644 --- a/include/asm-ia64/sn/io.h +++ b/include/asm-ia64/sn/io.h @@ -14,7 +14,7 @@ extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */ extern void __sn_mmiowb(void); /* Forward definition */ -extern int numionodes; +extern int num_cnodes; #define __sn_mf_a() ia64_mfa() diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h index 9f920c70a62a..bcbf209d63be 100644 --- a/include/asm-ia64/sn/klconfig.h +++ b/include/asm-ia64/sn/klconfig.h @@ -208,19 +208,6 @@ typedef struct lboard_s { klconf_off_t brd_next_same; /* Next BOARD with same nasid */ } lboard_t; -#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) -#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off)) -#define KLCF_NEXT(_brd) \ - ((_brd)->brd_next_same ? \ - (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL) -#define KLCF_NEXT_ANY(_brd) \ - ((_brd)->brd_next_any ? \ - (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL) -#define KLCF_COMP(_brd, _ndx) \ - ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \ - (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)]))) - - /* * Generic info structure. This stores common info about a * component. @@ -249,24 +236,11 @@ typedef struct klinfo_s { /* Generic info */ } klinfo_t ; -static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type) +static inline lboard_t *find_lboard_next(lboard_t * brd) { - /* Search all boards stored on this node. */ - - while (start) { - if (start->brd_type == brd_type) - return start; - start = KLCF_NEXT_ANY(start); - } - /* Didn't find it. */ - return (lboard_t *) NULL; + if (brd && brd->brd_next_any) + return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any); + return NULL; } - -/* external declarations of Linux kernel functions. */ - -extern lboard_t *root_lboard[]; -extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); -extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); - #endif /* _ASM_IA64_SN_KLCONFIG_H */ diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h index d2c1d34dcce4..749deb2ca6c1 100644 --- a/include/asm-ia64/sn/sn_cpuid.h +++ b/include/asm-ia64/sn/sn_cpuid.h @@ -105,7 +105,6 @@ extern short physical_node_map[]; /* indexed by nasid to get cnode */ #define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid) #define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode) #define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice) -#define cpuid_to_cnodeid(cpuid) (physical_node_map[cpuid_to_nasid(cpuid)]) /* @@ -113,8 +112,6 @@ extern short physical_node_map[]; /* indexed by nasid to get cnode */ * of potentially large tables. */ extern int nasid_slice_to_cpuid(int, int); -#define nasid_slice_to_cpu_physical_id(nasid, slice) \ - cpu_physical_id(nasid_slice_to_cpuid(nasid, slice)) /* * cnodeid_to_nasid - convert a cnodeid to a NASID diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index fea35b33d4e4..5ad855db8464 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -198,26 +198,16 @@ ia64_sn_get_master_baseio_nasid(void) return ret_stuff.v0; } -static inline char * +static inline void * ia64_sn_get_klconfig_addr(nasid_t nasid) { struct ia64_sal_retval ret_stuff; - int cnodeid; - cnodeid = nasid_to_cnodeid(nasid); ret_stuff.status = 0; ret_stuff.v0 = 0; ret_stuff.v1 = 0; ret_stuff.v2 = 0; SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0); - - /* - * We should panic if a valid cnode nasid does not produce - * a klconfig address. - */ - if (ret_stuff.status != 0) { - panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status); - } return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL; } diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h index 1df1c9f61a65..75a2f39c6ac6 100644 --- a/include/asm-ia64/sn/xp.h +++ b/include/asm-ia64/sn/xp.h @@ -49,7 +49,7 @@ * C-brick nasids, thus the need for bitmaps which don't account for * odd-numbered (non C-brick) nasids. */ -#define XP_MAX_PHYSNODE_ID (MAX_PHYSNODE_ID / 2) +#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2) #define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) #define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) -- cgit v1.2.3 From 55642d36cd0f626c614f6dfa1151a5af1ff84f36 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 15 Sep 2005 17:00:10 -0700 Subject: [IA64] Two more uses of cpuid_to_cnodeid() must go. s/cpuid_to_cnodeid/cpu_to_node/ Signed-off-by: Tony Luck --- drivers/char/mmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c index 12006182f575..78c89a3e7825 100644 --- a/drivers/char/mmtimer.c +++ b/drivers/char/mmtimer.c @@ -441,7 +441,7 @@ static irqreturn_t mmtimer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int i; - mmtimer_t *base = timers + cpuid_to_cnodeid(smp_processor_id()) * + mmtimer_t *base = timers + cpu_to_node(smp_processor_id()) * NUM_COMPARATORS; unsigned long expires = 0; int result = IRQ_NONE; @@ -608,7 +608,7 @@ static int sgi_timer_set(struct k_itimer *timr, int flags, */ preempt_disable(); - nodeid = cpuid_to_cnodeid(smp_processor_id()); + nodeid = cpu_to_node(smp_processor_id()); base = timers + nodeid * NUM_COMPARATORS; retry: /* Don't use an allocated timer, or a deleted one that's pending */ -- cgit v1.2.3 From eabf04151682bc7b57c84fea58cf9e4e5a3cf2a9 Mon Sep 17 00:00:00 2001 From: Hubert WS Lin Date: Wed, 14 Sep 2005 11:39:25 -0700 Subject: [PATCH] pcnet32: set_ringparam implementation This patch implements the set_ringparam(), one of the ethtool operations, which allows changing tx/rx ring sizes via ethtool. - Changed memery allocation of tx/rx ring from static to dynamic - Implemented set_ringparam() - Tested on i386 and ppc64 Signed-off-by: Hubert WS Lin Signed-off-by: Jay Vosburgh Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 263 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 209 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 6c3731b608da..7350c27ea2dc 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.30j" -#define DRV_RELDATE "29.04.2005" +#define DRV_VERSION "1.31" +#define DRV_RELDATE "02.Sep.2005" #define PFX DRV_NAME ": " static const char *version = @@ -257,6 +257,7 @@ static int homepna[MAX_UNITS]; * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. * v1.30i 28 Jun 2004 Don Fry change to use module_param. * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. + * v1.31 02 Sep 2005 Hubert WS Lin added set_ringparam(). */ @@ -266,17 +267,17 @@ static int homepna[MAX_UNITS]; * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). */ #ifndef PCNET32_LOG_TX_BUFFERS -#define PCNET32_LOG_TX_BUFFERS 4 -#define PCNET32_LOG_RX_BUFFERS 5 +#define PCNET32_LOG_TX_BUFFERS 4 +#define PCNET32_LOG_RX_BUFFERS 5 +#define PCNET32_LOG_MAX_TX_BUFFERS 9 /* 2^9 == 512 */ +#define PCNET32_LOG_MAX_RX_BUFFERS 9 #endif #define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS)) -#define TX_RING_MOD_MASK (TX_RING_SIZE - 1) -#define TX_RING_LEN_BITS ((PCNET32_LOG_TX_BUFFERS) << 12) +#define TX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_TX_BUFFERS)) #define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS)) -#define RX_RING_MOD_MASK (RX_RING_SIZE - 1) -#define RX_RING_LEN_BITS ((PCNET32_LOG_RX_BUFFERS) << 4) +#define RX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_RX_BUFFERS)) #define PKT_BUF_SZ 1544 @@ -339,8 +340,8 @@ struct pcnet32_access { */ struct pcnet32_private { /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ - struct pcnet32_rx_head rx_ring[RX_RING_SIZE]; - struct pcnet32_tx_head tx_ring[TX_RING_SIZE]; + struct pcnet32_rx_head *rx_ring; + struct pcnet32_tx_head *tx_ring; struct pcnet32_init_block init_block; dma_addr_t dma_addr; /* DMA address of beginning of this object, returned by @@ -349,13 +350,21 @@ struct pcnet32_private { structure */ const char *name; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - dma_addr_t tx_dma_addr[TX_RING_SIZE]; - dma_addr_t rx_dma_addr[RX_RING_SIZE]; + struct sk_buff **tx_skbuff; + struct sk_buff **rx_skbuff; + dma_addr_t *tx_dma_addr; + dma_addr_t *rx_dma_addr; struct pcnet32_access a; spinlock_t lock; /* Guard lock */ unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int rx_ring_size; /* current rx ring size */ + unsigned int tx_ring_size; /* current tx ring size */ + unsigned int rx_mod_mask; /* rx ring modular mask */ + unsigned int tx_mod_mask; /* tx ring modular mask */ + unsigned short rx_len_bits; + unsigned short tx_len_bits; + dma_addr_t rx_ring_dma_addr; + dma_addr_t tx_ring_dma_addr; unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ struct net_device_stats stats; char tx_full; @@ -397,6 +406,9 @@ static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); static void pcnet32_purge_tx_ring(struct net_device *dev); +static int pcnet32_alloc_ring(struct net_device *dev); +static void pcnet32_free_ring(struct net_device *dev); + enum pci_flags_bit { PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, @@ -613,10 +625,59 @@ static void pcnet32_get_ringparam(struct net_device *dev, struct ethtool_ringpar { struct pcnet32_private *lp = dev->priv; - ering->tx_max_pending = TX_RING_SIZE - 1; - ering->tx_pending = lp->cur_tx - lp->dirty_tx; - ering->rx_max_pending = RX_RING_SIZE - 1; - ering->rx_pending = lp->cur_rx & RX_RING_MOD_MASK; + ering->tx_max_pending = TX_MAX_RING_SIZE - 1; + ering->tx_pending = lp->tx_ring_size - 1; + ering->rx_max_pending = RX_MAX_RING_SIZE - 1; + ering->rx_pending = lp->rx_ring_size - 1; +} + +static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct pcnet32_private *lp = dev->priv; + unsigned long flags; + int i; + + if (ering->rx_mini_pending || ering->rx_jumbo_pending) + return -EINVAL; + + if (netif_running(dev)) + pcnet32_close(dev); + + spin_lock_irqsave(&lp->lock, flags); + pcnet32_free_ring(dev); + lp->tx_ring_size = min(ering->tx_pending, (unsigned int) TX_MAX_RING_SIZE); + lp->rx_ring_size = min(ering->rx_pending, (unsigned int) RX_MAX_RING_SIZE); + + for (i = 0; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { + if (lp->tx_ring_size <= (1 << i)) + break; + } + lp->tx_ring_size = (1 << i); + lp->tx_mod_mask = lp->tx_ring_size - 1; + lp->tx_len_bits = (i << 12); + + for (i = 0; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { + if (lp->rx_ring_size <= (1 << i)) + break; + } + lp->rx_ring_size = (1 << i); + lp->rx_mod_mask = lp->rx_ring_size - 1; + lp->rx_len_bits = (i << 4); + + if (pcnet32_alloc_ring(dev)) { + pcnet32_free_ring(dev); + return -ENOMEM; + } + + spin_unlock_irqrestore(&lp->lock, flags); + + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_INFO PFX "Ring Param Settings: RX: %d, TX: %d\n", lp->rx_ring_size, lp->tx_ring_size); + + if (netif_running(dev)) + pcnet32_open(dev); + + return 0; } static void pcnet32_get_strings(struct net_device *dev, u32 stringset, u8 *data) @@ -948,6 +1009,7 @@ static struct ethtool_ops pcnet32_ethtool_ops = { .nway_reset = pcnet32_nway_reset, .get_link = pcnet32_get_link, .get_ringparam = pcnet32_get_ringparam, + .set_ringparam = pcnet32_set_ringparam, .get_tx_csum = ethtool_op_get_tx_csum, .get_sg = ethtool_op_get_sg, .get_tso = ethtool_op_get_tso, @@ -1241,6 +1303,12 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) dev->priv = lp; lp->name = chipname; lp->shared_irq = shared; + lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */ + lp->rx_ring_size = RX_RING_SIZE; /* default rx ring size */ + lp->tx_mod_mask = lp->tx_ring_size - 1; + lp->rx_mod_mask = lp->rx_ring_size - 1; + lp->tx_len_bits = (PCNET32_LOG_TX_BUFFERS << 12); + lp->rx_len_bits = (PCNET32_LOG_RX_BUFFERS << 4); lp->mii_if.full_duplex = fdx; lp->mii_if.phy_id_mask = 0x1f; lp->mii_if.reg_num_mask = 0x1f; @@ -1267,21 +1335,23 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) } lp->a = *a; + if (pcnet32_alloc_ring(dev)) { + ret = -ENOMEM; + goto err_free_ring; + } /* detect special T1/E1 WAN card by checking for MAC address */ if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 && dev->dev_addr[2] == 0x75) lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI; lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */ - lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS); + lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); for (i = 0; i < 6; i++) lp->init_block.phys_addr[i] = dev->dev_addr[i]; lp->init_block.filter[0] = 0x00000000; lp->init_block.filter[1] = 0x00000000; - lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, rx_ring)); - lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, tx_ring)); + lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr); + lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr); /* switch pcnet32 to 32bit mode */ a->write_bcr(ioaddr, 20, 2); @@ -1312,7 +1382,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) if (pcnet32_debug & NETIF_MSG_PROBE) printk(", failed to detect IRQ line.\n"); ret = -ENODEV; - goto err_free_consistent; + goto err_free_ring; } if (pcnet32_debug & NETIF_MSG_PROBE) printk(", probed IRQ %d.\n", dev->irq); @@ -1343,7 +1413,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* Fill in the generic fields of the device structure. */ if (register_netdev(dev)) - goto err_free_consistent; + goto err_free_ring; if (pdev) { pci_set_drvdata(pdev, dev); @@ -1361,6 +1431,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) return 0; +err_free_ring: + pcnet32_free_ring(dev); err_free_consistent: pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); err_free_netdev: @@ -1371,6 +1443,86 @@ err_release_region: } +static int pcnet32_alloc_ring(struct net_device *dev) +{ + struct pcnet32_private *lp = dev->priv; + + if ((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, + &lp->tx_ring_dma_addr)) == NULL) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); + return -ENOMEM; + } + + if ((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, + &lp->rx_ring_dma_addr)) == NULL) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); + return -ENOMEM; + } + + if (!(lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); + + if (!(lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); + + if (!(lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); + + if (!(lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); + + return 0; +} + + +static void pcnet32_free_ring(struct net_device *dev) +{ + struct pcnet32_private *lp = dev->priv; + + kfree(lp->tx_skbuff); + lp->tx_skbuff = NULL; + + kfree(lp->rx_skbuff); + lp->rx_skbuff = NULL; + + kfree(lp->tx_dma_addr); + lp->tx_dma_addr = NULL; + + kfree(lp->rx_dma_addr); + lp->rx_dma_addr = NULL; + + if (lp->tx_ring) { + pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, + lp->tx_ring, lp->tx_ring_dma_addr); + lp->tx_ring = NULL; + } + + if (lp->rx_ring) { + pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, + lp->rx_ring, lp->rx_ring_dma_addr); + lp->rx_ring = NULL; + } +} + + static int pcnet32_open(struct net_device *dev) { @@ -1402,8 +1554,8 @@ pcnet32_open(struct net_device *dev) if (netif_msg_ifup(lp)) printk(KERN_DEBUG "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n", dev->name, dev->irq, - (u32) (lp->dma_addr + offsetof(struct pcnet32_private, tx_ring)), - (u32) (lp->dma_addr + offsetof(struct pcnet32_private, rx_ring)), + (u32) (lp->tx_ring_dma_addr), + (u32) (lp->rx_ring_dma_addr), (u32) (lp->dma_addr + offsetof(struct pcnet32_private, init_block))); /* set/reset autoselect bit */ @@ -1523,7 +1675,7 @@ pcnet32_open(struct net_device *dev) err_free_ring: /* free any allocated skbuffs */ - for (i = 0; i < RX_RING_SIZE; i++) { + for (i = 0; i < lp->rx_ring_size; i++) { lp->rx_ring[i].status = 0; if (lp->rx_skbuff[i]) { pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2, @@ -1533,6 +1685,9 @@ err_free_ring: lp->rx_skbuff[i] = NULL; lp->rx_dma_addr[i] = 0; } + + pcnet32_free_ring(dev); + /* * Switch back to 16bit mode to avoid problems with dumb * DOS packet driver after a warm reboot @@ -1564,7 +1719,7 @@ pcnet32_purge_tx_ring(struct net_device *dev) struct pcnet32_private *lp = dev->priv; int i; - for (i = 0; i < TX_RING_SIZE; i++) { + for (i = 0; i < lp->tx_ring_size; i++) { lp->tx_ring[i].status = 0; /* CPU owns buffer */ wmb(); /* Make sure adapter sees owner change */ if (lp->tx_skbuff[i]) { @@ -1589,7 +1744,7 @@ pcnet32_init_ring(struct net_device *dev) lp->cur_rx = lp->cur_tx = 0; lp->dirty_rx = lp->dirty_tx = 0; - for (i = 0; i < RX_RING_SIZE; i++) { + for (i = 0; i < lp->rx_ring_size; i++) { struct sk_buff *rx_skbuff = lp->rx_skbuff[i]; if (rx_skbuff == NULL) { if (!(rx_skbuff = lp->rx_skbuff[i] = dev_alloc_skb (PKT_BUF_SZ))) { @@ -1613,20 +1768,18 @@ pcnet32_init_ring(struct net_device *dev) } /* The Tx buffer address is filled in as needed, but we do need to clear * the upper ownership bit. */ - for (i = 0; i < TX_RING_SIZE; i++) { + for (i = 0; i < lp->tx_ring_size; i++) { lp->tx_ring[i].status = 0; /* CPU owns buffer */ wmb(); /* Make sure adapter sees owner change */ lp->tx_ring[i].base = 0; lp->tx_dma_addr[i] = 0; } - lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS); + lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); for (i = 0; i < 6; i++) lp->init_block.phys_addr[i] = dev->dev_addr[i]; - lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, rx_ring)); - lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, tx_ring)); + lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr); + lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr); wmb(); /* Make sure all changes are visible */ return 0; } @@ -1684,13 +1837,13 @@ pcnet32_tx_timeout (struct net_device *dev) printk(KERN_DEBUG " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "", lp->cur_rx); - for (i = 0 ; i < RX_RING_SIZE; i++) + for (i = 0 ; i < lp->rx_ring_size; i++) printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", le32_to_cpu(lp->rx_ring[i].base), (-le16_to_cpu(lp->rx_ring[i].buf_length)) & 0xffff, le32_to_cpu(lp->rx_ring[i].msg_length), le16_to_cpu(lp->rx_ring[i].status)); - for (i = 0 ; i < TX_RING_SIZE; i++) + for (i = 0 ; i < lp->tx_ring_size; i++) printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", le32_to_cpu(lp->tx_ring[i].base), (-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff, @@ -1731,7 +1884,7 @@ pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Fill in a Tx ring entry */ /* Mask to ring buffer boundary. */ - entry = lp->cur_tx & TX_RING_MOD_MASK; + entry = lp->cur_tx & lp->tx_mod_mask; /* Caution: the write order is important here, set the status * with the "ownership" bits last. */ @@ -1755,7 +1908,7 @@ pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; - if (lp->tx_ring[(entry+1) & TX_RING_MOD_MASK].base != 0) { + if (lp->tx_ring[(entry+1) & lp->tx_mod_mask].base != 0) { lp->tx_full = 1; netif_stop_queue(dev); } @@ -1808,7 +1961,7 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs) int delta; while (dirty_tx != lp->cur_tx) { - int entry = dirty_tx & TX_RING_MOD_MASK; + int entry = dirty_tx & lp->tx_mod_mask; int status = (short)le16_to_cpu(lp->tx_ring[entry].status); if (status < 0) @@ -1866,18 +2019,18 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs) dirty_tx++; } - delta = (lp->cur_tx - dirty_tx) & (TX_RING_MOD_MASK + TX_RING_SIZE); - if (delta > TX_RING_SIZE) { + delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size); + if (delta > lp->tx_ring_size) { if (netif_msg_drv(lp)) printk(KERN_ERR "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n", dev->name, dirty_tx, lp->cur_tx, lp->tx_full); - dirty_tx += TX_RING_SIZE; - delta -= TX_RING_SIZE; + dirty_tx += lp->tx_ring_size; + delta -= lp->tx_ring_size; } if (lp->tx_full && netif_queue_stopped(dev) && - delta < TX_RING_SIZE - 2) { + delta < lp->tx_ring_size - 2) { /* The ring is no longer full, clear tbusy. */ lp->tx_full = 0; netif_wake_queue (dev); @@ -1934,8 +2087,8 @@ static int pcnet32_rx(struct net_device *dev) { struct pcnet32_private *lp = dev->priv; - int entry = lp->cur_rx & RX_RING_MOD_MASK; - int boguscnt = RX_RING_SIZE / 2; + int entry = lp->cur_rx & lp->rx_mod_mask; + int boguscnt = lp->rx_ring_size / 2; /* If we own the next entry, it's a new packet. Send it up. */ while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) { @@ -2000,12 +2153,12 @@ pcnet32_rx(struct net_device *dev) if (netif_msg_drv(lp)) printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n", dev->name); - for (i = 0; i < RX_RING_SIZE; i++) + for (i = 0; i < lp->rx_ring_size; i++) if ((short)le16_to_cpu(lp->rx_ring[(entry+i) - & RX_RING_MOD_MASK].status) < 0) + & lp->rx_mod_mask].status) < 0) break; - if (i > RX_RING_SIZE -2) { + if (i > lp->rx_ring_size -2) { lp->stats.rx_dropped++; lp->rx_ring[entry].status |= le16_to_cpu(0x8000); wmb(); /* Make sure adapter sees owner change */ @@ -2043,7 +2196,7 @@ pcnet32_rx(struct net_device *dev) lp->rx_ring[entry].buf_length = le16_to_cpu(2-PKT_BUF_SZ); wmb(); /* Make sure owner changes after all others are visible */ lp->rx_ring[entry].status |= le16_to_cpu(0x8000); - entry = (++lp->cur_rx) & RX_RING_MOD_MASK; + entry = (++lp->cur_rx) & lp->rx_mod_mask; if (--boguscnt <= 0) break; /* don't stay in loop forever */ } @@ -2086,7 +2239,7 @@ pcnet32_close(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); /* free all allocated skbuffs */ - for (i = 0; i < RX_RING_SIZE; i++) { + for (i = 0; i < lp->rx_ring_size; i++) { lp->rx_ring[i].status = 0; wmb(); /* Make sure adapter sees owner change */ if (lp->rx_skbuff[i]) { @@ -2098,7 +2251,7 @@ pcnet32_close(struct net_device *dev) lp->rx_dma_addr[i] = 0; } - for (i = 0; i < TX_RING_SIZE; i++) { + for (i = 0; i < lp->tx_ring_size; i++) { lp->tx_ring[i].status = 0; /* CPU owns buffer */ wmb(); /* Make sure adapter sees owner change */ if (lp->tx_skbuff[i]) { @@ -2267,6 +2420,7 @@ static void __devexit pcnet32_remove_one(struct pci_dev *pdev) struct pcnet32_private *lp = dev->priv; unregister_netdev(dev); + pcnet32_free_ring(dev); release_region(dev->base_addr, PCNET32_TOTAL_SIZE); pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); free_netdev(dev); @@ -2342,6 +2496,7 @@ static void __exit pcnet32_cleanup_module(void) struct pcnet32_private *lp = pcnet32_dev->priv; next_dev = lp->next; unregister_netdev(pcnet32_dev); + pcnet32_free_ring(pcnet32_dev); release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE); pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); free_netdev(pcnet32_dev); -- cgit v1.2.3 From 76209926e3756f66c9cdc8a4becbf34df8c47799 Mon Sep 17 00:00:00 2001 From: Hubert WS Lin Date: Wed, 14 Sep 2005 11:39:27 -0700 Subject: [PATCH] pcnet32: set min ring size to 4 Don Fry reminded me that the pcnet32_loopback_test() asssumes the ring size is no less than 4. The minimum ring size was changed to 4 in pcnet32_set_ringparam() to allow the loopback test to work unchanged. - Set minimum ring size to 4 to allow loopback test to work unchanged - Moved variable init_block to first field in struct pcnet32_private Signed-off-by: Hubert WS Lin Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 7350c27ea2dc..70fe81a89df9 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.31" -#define DRV_RELDATE "02.Sep.2005" +#define DRV_VERSION "1.31a" +#define DRV_RELDATE "12.Sep.2005" #define PFX DRV_NAME ": " static const char *version = @@ -258,6 +258,8 @@ static int homepna[MAX_UNITS]; * v1.30i 28 Jun 2004 Don Fry change to use module_param. * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. * v1.31 02 Sep 2005 Hubert WS Lin added set_ringparam(). + * v1.31a 12 Sep 2005 Hubert WS Lin set min ring size to 4 + * to allow loopback test to work unchanged. */ @@ -335,14 +337,14 @@ struct pcnet32_access { }; /* - * The first three fields of pcnet32_private are read by the ethernet device - * so we allocate the structure should be allocated by pci_alloc_consistent(). + * The first field of pcnet32_private is read by the ethernet device + * so the structure should be allocated using pci_alloc_consistent(). */ struct pcnet32_private { + struct pcnet32_init_block init_block; /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ struct pcnet32_rx_head *rx_ring; struct pcnet32_tx_head *tx_ring; - struct pcnet32_init_block init_block; dma_addr_t dma_addr; /* DMA address of beginning of this object, returned by pci_alloc_consistent */ @@ -648,7 +650,10 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara lp->tx_ring_size = min(ering->tx_pending, (unsigned int) TX_MAX_RING_SIZE); lp->rx_ring_size = min(ering->rx_pending, (unsigned int) RX_MAX_RING_SIZE); - for (i = 0; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { + /* set the minimum ring size to 4, to allow the loopback test to work + * unchanged. + */ + for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { if (lp->tx_ring_size <= (1 << i)) break; } @@ -656,7 +661,7 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara lp->tx_mod_mask = lp->tx_ring_size - 1; lp->tx_len_bits = (i << 12); - for (i = 0; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { + for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { if (lp->rx_ring_size <= (1 << i)) break; } -- cgit v1.2.3 From 65853b133d0256786df25f03eea0e5a6799e8d17 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 16 Sep 2005 02:15:13 -0400 Subject: [PATCH] orinoco: Remove conditionals that are useless in the kernel drivers. Author: Pavel Roskin Date: Fri Sep 16 00:49:05 2005 -0400 Remove conditionals that are useless in the kernel drivers. Kernel drivers are never compiled against pcmcia-cs headers. Firmware is never embedded into spectrum_cs module. Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_cs.c | 3 --- drivers/net/wireless/spectrum_cs.c | 26 +------------------------- 2 files changed, 1 insertion(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index bedd7f9f23e4..1cedabf583b3 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -14,9 +14,6 @@ #define PFX DRIVER_NAME ": " #include -#ifdef __IN_PCMCIA_PACKAGE__ -#include -#endif /* __IN_PCMCIA_PACKAGE__ */ #include #include diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 39c6cdf7f3f7..256d31b42966 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -22,9 +22,6 @@ #define PFX DRIVER_NAME ": " #include -#ifdef __IN_PCMCIA_PACKAGE__ -#include -#endif /* __IN_PCMCIA_PACKAGE__ */ #include #include @@ -38,6 +35,7 @@ #include #include #include +#include #include #include @@ -51,29 +49,10 @@ #include "orinoco.h" -/* - * If SPECTRUM_FW_INCLUDED is defined, the firmware is hardcoded into - * the driver. Use get_symbol_fw script to generate spectrum_fw.h and - * copy it to the same directory as spectrum_cs.c. - * - * If SPECTRUM_FW_INCLUDED is not defined, the firmware is loaded at the - * runtime using hotplug. Use the same get_symbol_fw script to generate - * files symbol_sp24t_prim_fw symbol_sp24t_sec_fw, copy them to the - * hotplug firmware directory (typically /usr/lib/hotplug/firmware) and - * make sure that you have hotplug installed and enabled in the kernel. - */ -/* #define SPECTRUM_FW_INCLUDED 1 */ - -#ifdef SPECTRUM_FW_INCLUDED -/* Header with the firmware */ -#include "spectrum_fw.h" -#else /* !SPECTRUM_FW_INCLUDED */ -#include static unsigned char *primsym; static unsigned char *secsym; static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; -#endif /* !SPECTRUM_FW_INCLUDED */ /********************************************************************/ /* Module stuff */ @@ -571,8 +550,6 @@ spectrum_dl_firmware(hermes_t *hw, dev_link_t *link) { int ret; client_handle_t handle = link->handle; - -#ifndef SPECTRUM_FW_INCLUDED const struct firmware *fw_entry; if (request_firmware(&fw_entry, primary_fw_name, @@ -592,7 +569,6 @@ spectrum_dl_firmware(hermes_t *hw, dev_link_t *link) secondary_fw_name); return -ENOENT; } -#endif /* Load primary firmware */ ret = spectrum_dl_image(hw, link, primsym); -- cgit v1.2.3 From 27c91efba4c121f90c0e6d371c7064733b286a69 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 16 Sep 2005 02:16:52 -0400 Subject: [PATCH] orinoco: Don't include twice. Author: Pavel Roskin Date: Fri Sep 16 00:50:00 2005 -0400 Don't include twice. Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 639b8e4ba684..77e93a225530 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -94,8 +94,6 @@ #include #include -#include - #include #include #include -- cgit v1.2.3 From 9c8a11d7c2298680ff3ee8acda54575c88668bfc Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 16 Sep 2005 02:18:31 -0400 Subject: [PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_cs.c | 76 ++++++++++++++++++++++++++++---------- drivers/net/wireless/spectrum_cs.c | 2 +- 2 files changed, 57 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 1cedabf583b3..80920b1c6fcf 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -600,49 +600,85 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION "Pavel Roskin , et al)"; static struct pcmcia_device_id orinoco_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), - PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), - PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), - PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), - PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), - PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), - PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ + PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ + PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ + PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ + PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ + PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ + PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ + PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ + PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ + PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ + PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), - PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), + PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), + PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), + PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), + PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), + PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), + PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), + PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), + PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), + PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), + PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), + PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), + PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), + PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), + PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), + PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), + PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), + PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), - PCMCIA_DEVICE_PROD_ID1("Symbol Technologies", 0x3f02b4d6), + PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), + PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), + PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), + PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 256d31b42966..63e00422d1a0 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -1061,7 +1061,7 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4100 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), /* Intel PRO/Wireless 2011B */ + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); -- cgit v1.2.3 From a33a1982012e9070736e3717231714dc9892303b Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 14 Sep 2005 14:28:59 -0500 Subject: [PATCH] Updated ipw2200 to compile with ieee80211 abg_ture to abg_true change author James Ketrenos 1126713327 -0500 committer James Ketrenos 1126713327 -0500 Updated ipw2200 to compile with ieee80211 abg_ture to abg_true change. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index b7f275c00de3..86feef732dbb 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -6010,12 +6010,12 @@ static int ipw_wx_set_wireless_mode(struct net_device *dev, } if (priv->adapter == IPW_2915ABG) { - priv->ieee->abg_ture = 1; + priv->ieee->abg_true = 1; if (mode & IEEE_A) { band |= IEEE80211_52GHZ_BAND; modulation |= IEEE80211_OFDM_MODULATION; } else - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; } else { if (mode & IEEE_A) { IPW_WARNING("Attempt to set 2200BG into " @@ -6023,20 +6023,20 @@ static int ipw_wx_set_wireless_mode(struct net_device *dev, return -EINVAL; } - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; } if (mode & IEEE_B) { band |= IEEE80211_24GHZ_BAND; modulation |= IEEE80211_CCK_MODULATION; } else - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; if (mode & IEEE_G) { band |= IEEE80211_24GHZ_BAND; modulation |= IEEE80211_OFDM_MODULATION; } else - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; priv->ieee->mode = mode; priv->ieee->freq_band = band; @@ -7108,7 +7108,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_INFO DRV_NAME ": Detected Intel PRO/Wireless 2915ABG Network " "Connection\n"); - priv->ieee->abg_ture = 1; + priv->ieee->abg_true = 1; band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND; modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; @@ -7124,7 +7124,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ": Detected Intel PRO/Wireless 2200BG Network " "Connection\n"); - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; band = IEEE80211_24GHZ_BAND; modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; -- cgit v1.2.3 From 99a4b232b6682a847c70d877e4a3c15e9138c8f6 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:25 -0500 Subject: [PATCH] ieee80211: Updated ipw2100 to be compatible with ieee80211_hdr changes tree 992b203395c50342f1cced415acae6177344e270 parent c59bb604a2ff4e40232ff0422e7adc44e3b007a0 author James Ketrenos 1126714006 -0500 committer James Ketrenos 1127315910 -0500 Updated ipw2100 to be compatible with ieee80211_hdr changes. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2100.c | 4 ++-- drivers/net/wireless/ipw2100.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index e5cdb5bfabc8..8dc80f806c34 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -2948,7 +2948,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) int next = txq->next; int i = 0; struct ipw2100_data_header *ipw_hdr; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_3addr *hdr; while (!list_empty(&priv->tx_pend_list)) { /* if there isn't enough space in TBD queue, then @@ -2984,7 +2984,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) packet->index = txq->next; ipw_hdr = packet->info.d_struct.data; - hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb-> + hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb-> fragments[0]->data; if (priv->ieee->iw_mode == IW_MODE_INFRA) { diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index 2a3cdbd50168..c9e99ce15d66 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -808,7 +808,7 @@ struct ipw2100_priv { struct ipw2100_rx { union { unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH]; - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; u32 status; struct ipw2100_notification notification; struct ipw2100_cmd_header command; -- cgit v1.2.3 From 3a5becf720d6346ffca2d6be6473f603b39322a2 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:37 -0500 Subject: [PATCH] ieee80211: Updated ipw2100 to be compatible with ieee80211's hard_start_xmit change tree ee48cbe413b795d6be454b9baf4f3bd3d74814cb parent 49856b147763bd6847e0d8f53aee1ddd61385638 author James Ketrenos 1126716634 -0500 committer James Ketrenos 1127316024 -0500 Updated ipw2100 to be compatible with ieee80211's hard_start_xmit change. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 8dc80f806c34..ad7f8cd76db9 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -3269,7 +3269,8 @@ static irqreturn_t ipw2100_interrupt(int irq, void *data, return IRQ_NONE; } -static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev) +static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev, + int pri) { struct ipw2100_priv *priv = ieee80211_priv(dev); struct list_head *element; -- cgit v1.2.3 From 0dacca1f0a53938dd7d5ba35c692bd1a3356d504 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:41 -0500 Subject: [PATCH] ieee80211: Updated ipw2200 to be compatible with ieee80211_hdr changes tree 9f86c7b4f59249c05c96c360dfaa817995e8a44f parent 9b09701b2c6254f2fddb009004a14eb5a908714f author James Ketrenos 1126714305 -0500 committer James Ketrenos 1127316074 -0500 Updated ipw2200 to be compatible with ieee80211_hdr changes. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 9 +++++---- drivers/net/wireless/ipw2200.h | 4 ++-- 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 86feef732dbb..34f005229ddb 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -4904,7 +4904,7 @@ static void ipw_rx(struct ipw_priv *priv) { struct ipw_rx_mem_buffer *rxb; struct ipw_rx_packet *pkt; - struct ieee80211_hdr *header; + struct ieee80211_hdr_4addr *header; u32 r, w, i; u8 network_packet; @@ -4967,8 +4967,9 @@ static void ipw_rx(struct ipw_priv *priv) #endif header = - (struct ieee80211_hdr *)(rxb->skb->data + - IPW_RX_FRAME_SIZE); + (struct ieee80211_hdr_4addr *)(rxb->skb-> + data + + IPW_RX_FRAME_SIZE); /* TODO: Check Ad-Hoc dest/source and make sure * that we are actually parsing these packets * correctly -- we should probably use the @@ -6325,7 +6326,7 @@ we need to heavily modify the ieee80211_skb_to_txb. static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) + struct ieee80211_hdr_3addr *hdr = (struct ieee80211_hdr_3addr *) txb->fragments[0]->data; int i = 0; struct tfd_frame *tfd; diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index 5b00882133f9..e9cf32bf3e31 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1654,12 +1654,12 @@ static const long ipw_frequencies[] = { #define IPW_MAX_CONFIG_RETRIES 10 -static inline u32 frame_hdr_len(struct ieee80211_hdr *hdr) +static inline u32 frame_hdr_len(struct ieee80211_hdr_4addr *hdr) { u32 retval; u16 fc; - retval = sizeof(struct ieee80211_hdr); + retval = sizeof(struct ieee80211_hdr_3addr); fc = le16_to_cpu(hdr->frame_ctl); /* -- cgit v1.2.3 From c8d42d1ae4518091a20f7212b0591a0f4b0e8ca0 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:43 -0500 Subject: [PATCH] ieee80211: Updated ipw2200 to be compatible with ieee80211's hard_start_xmit change. tree 713b6ff3311decfe42d5209f7b2508736d144b85 parent 6465beff0e89779330450dffc2a5e6dc5154eebf author James Ketrenos 1126716726 -0500 committer James Ketrenos 1127316162 -0500 Updated ipw2200 to be compatible with ieee80211's hard_start_xmit change. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 34f005229ddb..7ea9bd58f65f 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -6449,7 +6449,7 @@ static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb) } static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb, - struct net_device *dev) + struct net_device *dev, int pri) { struct ipw_priv *priv = ieee80211_priv(dev); unsigned long flags; -- cgit v1.2.3 From 4ca5253d573d7b3785dbb2f123f948fdca6ee235 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:46 -0500 Subject: [PATCH] ieee80211: Updated atmel to be compatible with ieee80211_hdr changes tree d7be83000b058b14450d76f99c432b1fb2a1c177 parent 322201093e03830fceedfc24931420b1ea855a8c author James Ketrenos 1127316330 -0500 committer James Ketrenos 1127316330 -0500 Updated atmel to be compatible with ieee80211_hdr changes. Change accomplished via: sed -i -e "s:ieee80211_hdr\([^_]\):ieee80211_hdr_4addr\1:g" \ drivers/net/wireless/atmel.c Compile tested only. CC: simon@thekelleys.org.uk Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/atmel.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 587869d86eee..d57011028b72 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -618,12 +618,12 @@ static int atmel_lock_mac(struct atmel_private *priv); static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data); static void atmel_command_irq(struct atmel_private *priv); static int atmel_validate_channel(struct atmel_private *priv, int channel); -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, +static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi); static void atmel_management_timer(u_long a); static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size); static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, +static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u8 *body, int body_len); static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index); @@ -827,7 +827,7 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l static int start_tx (struct sk_buff *skb, struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; unsigned long flags; u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; @@ -902,7 +902,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) } static void atmel_transmit_management_frame(struct atmel_private *priv, - struct ieee80211_hdr *header, + struct ieee80211_hdr_4addr *header, u8 *body, int body_len) { u16 buff; @@ -917,7 +917,7 @@ static void atmel_transmit_management_frame(struct atmel_private *priv, tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT); } -static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header, +static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc) { /* fast path: unfragmented packet copy directly into skbuf */ @@ -990,7 +990,7 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return (crc ^ 0xffffffff) == netcrc; } -static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header, +static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags) { u8 mac4[6]; @@ -1082,7 +1082,7 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *heade static void rx_done_irq(struct atmel_private *priv) { int i; - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; for (i = 0; atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID && @@ -2650,7 +2650,7 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 c static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len) { - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; struct auth_body auth; header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); @@ -2688,7 +2688,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) { u8 *ssid_el_p; int bodysize; - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; struct ass_req_format { u16 capability; u16 listen_interval; @@ -2738,7 +2738,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize); } -static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr *header) +static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr_4addr *header) { if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0; @@ -2788,7 +2788,7 @@ static int retrieve_bss(struct atmel_private *priv) } -static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr *header, +static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 capability, u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len, u8 *ssid, int is_beacon) { @@ -3072,7 +3072,7 @@ static void atmel_smooth_qual(struct atmel_private *priv) } /* deals with incoming managment frames. */ -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, +static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi) { u16 subtype; -- cgit v1.2.3 From d041674d62e1ad565f2fb6d53ae80b31d6656033 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:49 -0500 Subject: [PATCH] ieee80211: Updated hostap to be compatible with ieee80211_hdr changes tree 8ec97d9056ceaf0f845ed51175dd842b700baadd parent 329128457008ace3110c96971addf85a767dd5af author James Ketrenos 1126714484 -0500 committer James Ketrenos 1127316636 -0500 Updated hostap to be compatible with ieee80211_hdr changes. Change accomplished via: for i in hostap_ap.{c,h} hostap_80211_{t,r}x.c; do sed -i -e "s:ieee80211_hdr\([^_]\):ieee80211_hdr_4addr\1:g" \ drivers/net/wireless/hostap/$i done CC: Jouni Malinen Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_80211_rx.c | 40 ++++++++-------- drivers/net/wireless/hostap/hostap_80211_tx.c | 20 ++++---- drivers/net/wireless/hostap/hostap_ap.c | 66 +++++++++++++-------------- drivers/net/wireless/hostap/hostap_ap.h | 6 +-- 4 files changed, 66 insertions(+), 66 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index b0501243b175..42e61c68c325 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -6,10 +6,10 @@ void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d " "jiffies=%ld\n", @@ -51,7 +51,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, int hdrlen, phdrlen, head_need, tail_need; u16 fc; int prism_header, ret; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; iface = netdev_priv(dev); local = iface->local; @@ -70,7 +70,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, phdrlen = 0; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { @@ -215,7 +215,7 @@ prism2_frag_cache_find(local_info_t *local, unsigned int seq, /* Called only as a tasklet (software IRQ) */ static struct sk_buff * -prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) +prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr_4addr *hdr) { struct sk_buff *skb = NULL; u16 sc; @@ -229,7 +229,7 @@ prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) if (frag == 0) { /* Reserve enough space to fit maximum frame length */ skb = dev_alloc_skb(local->dev->mtu + - sizeof(struct ieee80211_hdr) + + sizeof(struct ieee80211_hdr_4addr) + 8 /* LLC */ + 2 /* alignment */ + 8 /* WEP */ + ETH_ALEN /* WDS */); @@ -267,7 +267,7 @@ prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) /* Called only as a tasklet (software IRQ) */ static int prism2_frag_cache_invalidate(local_info_t *local, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { u16 sc; unsigned int seq; @@ -441,7 +441,7 @@ hostap_rx_frame_mgmt(local_info_t *local, struct sk_buff *skb, u16 stype) { if (local->iw_mode == IW_MODE_MASTER) { - hostap_update_sta_ps(local, (struct ieee80211_hdr *) + hostap_update_sta_ps(local, (struct ieee80211_hdr_4addr *) skb->data); } @@ -520,7 +520,7 @@ static inline struct net_device *prism2_rx_get_wds(local_info_t *local, static inline int -hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr, +hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr, u16 fc, struct net_device **wds) { /* FIX: is this really supposed to accept WDS frames only in Master @@ -579,13 +579,13 @@ static int hostap_is_eapol_frame(local_info_t *local, struct sk_buff *skb) { struct net_device *dev = local->dev; u16 fc, ethertype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u8 *pos; if (skb->len < 24) return 0; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); /* check that the frame is unicast frame to us */ @@ -619,13 +619,13 @@ static inline int hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb, struct ieee80211_crypt_data *crypt) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; int res, hdrlen; if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL) return 0; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); if (local->tkip_countermeasures && @@ -658,13 +658,13 @@ static inline int hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb, int keyidx, struct ieee80211_crypt_data *crypt) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; int res, hdrlen; if (crypt == NULL || crypt->ops->decrypt_msdu == NULL) return 0; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); atomic_inc(&crypt->refcnt); @@ -689,7 +689,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, { struct hostap_interface *iface; local_info_t *local; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; size_t hdrlen; u16 fc, type, stype, sc; struct net_device *wds = NULL; @@ -716,7 +716,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, dev = local->ddev; iface = netdev_priv(dev); - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; stats = hostap_get_stats(dev); if (skb->len < 10) @@ -889,7 +889,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) goto rx_dropped; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; /* skb: hdr + (possibly fragmented) plaintext payload */ @@ -941,7 +941,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, /* this was the last fragment and the frame will be * delivered, so remove skb from fragment cache */ skb = frag_skb; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; prism2_frag_cache_invalidate(local, hdr); } @@ -952,7 +952,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt)) goto rx_dropped; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) { if (local->ieee_802_1x && hostap_is_eapol_frame(local, skb)) { diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c index 6358015f6526..6db45430288c 100644 --- a/drivers/net/wireless/hostap/hostap_80211_tx.c +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -1,9 +1,9 @@ void hostap_dump_tx_80211(const char *name, struct sk_buff *skb) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", name, skb->len, jiffies); @@ -41,7 +41,7 @@ int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev) struct hostap_interface *iface; local_info_t *local; int need_headroom, need_tailroom = 0; - struct ieee80211_hdr hdr; + struct ieee80211_hdr_4addr hdr; u16 fc, ethertype = 0; enum { WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME @@ -244,7 +244,7 @@ int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) struct hostap_interface *iface; local_info_t *local; struct hostap_skb_tx_data *meta; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; iface = netdev_priv(dev); @@ -266,7 +266,7 @@ int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) meta->iface = iface; if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) { - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA && WLAN_FC_GET_STYPE(fc) == IEEE80211_STYPE_DATA) { @@ -289,7 +289,7 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, { struct hostap_interface *iface; local_info_t *local; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; int hdr_len, res; @@ -303,7 +303,7 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, if (local->tkip_countermeasures && crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) { - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (net_ratelimit()) { printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " "TX packet to " MACSTR "\n", @@ -325,7 +325,7 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, return NULL; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); hdr_len = hostap_80211_get_hdrlen(fc); @@ -360,7 +360,7 @@ int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev) ap_tx_ret tx_ret; struct hostap_skb_tx_data *meta; int no_encrypt = 0; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; iface = netdev_priv(dev); local = iface->local; @@ -403,7 +403,7 @@ int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_ret = hostap_handle_sta_tx(local, &tx); skb = tx.skb; meta = (struct hostap_skb_tx_data *) skb->cb; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); switch (tx_ret) { case AP_TX_CONTINUE: diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 930cef8367f2..070f7032edb5 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -591,14 +591,14 @@ static void hostap_ap_tx_cb(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; u16 fc; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; if (!ap->local->hostapd || !ap->local->apdev) { dev_kfree_skb(skb); return; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); /* Pass the TX callback frame to the hostapd; use 802.11 header version @@ -623,7 +623,7 @@ static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; struct net_device *dev = ap->local->dev; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc, *pos, auth_alg, auth_transaction, status; struct sta_info *sta = NULL; char *txt = NULL; @@ -633,7 +633,7 @@ static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) return; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT || WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_AUTH || @@ -692,7 +692,7 @@ static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; struct net_device *dev = ap->local->dev; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc, *pos, status; struct sta_info *sta = NULL; char *txt = NULL; @@ -702,7 +702,7 @@ static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) return; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT || (WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_ASSOC_RESP && @@ -757,12 +757,12 @@ static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct sta_info *sta; if (skb->len < 24) goto fail; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (ok) { spin_lock(&ap->sta_table_lock); sta = ap_get_sta(ap, hdr->addr1); @@ -918,7 +918,7 @@ static void prism2_send_mgmt(struct net_device *dev, { struct hostap_interface *iface; local_info_t *local; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; struct sk_buff *skb; struct hostap_skb_tx_data *meta; @@ -944,7 +944,7 @@ static void prism2_send_mgmt(struct net_device *dev, fc = type_subtype; hdrlen = hostap_80211_get_hdrlen(fc); - hdr = (struct ieee80211_hdr *) skb_put(skb, hdrlen); + hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, hdrlen); if (body) memcpy(skb_put(skb, body_len), body, body_len); @@ -1285,7 +1285,7 @@ static void handle_authen(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; size_t hdrlen; struct ap_data *ap = local->ap; char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL; @@ -1498,7 +1498,7 @@ static void handle_assoc(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats, int reassoc) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char body[12], *p, *lpos; int len, left; u16 *pos; @@ -1705,7 +1705,7 @@ static void handle_deauth(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN); int len; u16 reason_code, *pos; @@ -1746,7 +1746,7 @@ static void handle_disassoc(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char *body = skb->data + IEEE80211_MGMT_HDR_LEN; int len; u16 reason_code, *pos; @@ -1784,7 +1784,7 @@ static void handle_disassoc(local_info_t *local, struct sk_buff *skb, /* Called only as a scheduled task for pending AP frames. */ static void ap_handle_data_nullfunc(local_info_t *local, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { struct net_device *dev = local->dev; @@ -1801,7 +1801,7 @@ static void ap_handle_data_nullfunc(local_info_t *local, /* Called only as a scheduled task for pending AP frames. */ static void ap_handle_dropped_data(local_info_t *local, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { struct net_device *dev = local->dev; struct sta_info *sta; @@ -1860,7 +1860,7 @@ static void pspoll_send_buffered(local_info_t *local, struct sta_info *sta, /* Called only as a scheduled task for pending AP frames. */ static void handle_pspoll(local_info_t *local, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; @@ -1979,7 +1979,7 @@ static void handle_wds_oper_queue(void *data) static void handle_beacon(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char *body = skb->data + IEEE80211_MGMT_HDR_LEN; int len, left; u16 *pos, beacon_int, capability; @@ -2137,11 +2137,11 @@ static void handle_ap_item(local_info_t *local, struct sk_buff *skb, struct net_device *dev = local->dev; #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ u16 fc, type, stype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; /* FIX: should give skb->len to handler functions and check that the * buffer is long enough */ - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); type = WLAN_FC_GET_TYPE(fc); stype = WLAN_FC_GET_STYPE(fc); @@ -2258,7 +2258,7 @@ void hostap_rx(struct net_device *dev, struct sk_buff *skb, struct hostap_interface *iface; local_info_t *local; u16 fc; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; iface = netdev_priv(dev); local = iface->local; @@ -2268,7 +2268,7 @@ void hostap_rx(struct net_device *dev, struct sk_buff *skb, local->stats.rx_packets++; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL && @@ -2289,7 +2289,7 @@ void hostap_rx(struct net_device *dev, struct sk_buff *skb, static void schedule_packet_send(local_info_t *local, struct sta_info *sta) { struct sk_buff *skb; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct hostap_80211_rx_status rx_stats; if (skb_queue_empty(&sta->tx_buf)) @@ -2302,7 +2302,7 @@ static void schedule_packet_send(local_info_t *local, struct sta_info *sta) return; } - hdr = (struct ieee80211_hdr *) skb_put(skb, 16); + hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, 16); /* Generate a fake pspoll frame to start packet delivery */ hdr->frame_ctl = __constant_cpu_to_le16( @@ -2685,7 +2685,7 @@ ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) struct sta_info *sta = NULL; struct sk_buff *skb = tx->skb; int set_tim, ret; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct hostap_skb_tx_data *meta; meta = (struct hostap_skb_tx_data *) skb->cb; @@ -2694,7 +2694,7 @@ ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) meta->iface->type == HOSTAP_INTERFACE_STA) goto out; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (hdr->addr1[0] & 0x01) { /* broadcast/multicast frame - no AP related processing */ @@ -2821,10 +2821,10 @@ void hostap_handle_sta_release(void *ptr) void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb) { struct sta_info *sta; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct hostap_skb_tx_data *meta; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; meta = (struct hostap_skb_tx_data *) skb->cb; spin_lock(&local->ap->sta_table_lock); @@ -2892,7 +2892,7 @@ static void hostap_update_sta_ps2(local_info_t *local, struct sta_info *sta, /* Called only as a tasklet (software IRQ). Called for each RX frame to update * STA power saving state. pwrmgt is a flag from 802.11 frame_ctl field. */ -int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr) +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr_4addr *hdr) { struct sta_info *sta; u16 fc; @@ -2925,12 +2925,12 @@ ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, int ret; struct sta_info *sta; u16 fc, type, stype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; if (local->ap == NULL) return AP_RX_CONTINUE; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); type = WLAN_FC_GET_TYPE(fc); @@ -3058,7 +3058,7 @@ ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, /* Called only as a tasklet (software IRQ) */ int hostap_handle_sta_crypto(local_info_t *local, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, struct ieee80211_crypt_data **crypt, void **sta_ptr) { @@ -3160,7 +3160,7 @@ int hostap_add_sta(struct ap_data *ap, u8 *sta_addr) /* Called only as a tasklet (software IRQ) */ int hostap_update_rx_stats(struct ap_data *ap, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, struct hostap_80211_rx_status *rx_stats) { struct sta_info *sta; diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h index 816a52bcea8f..6d00df69c2e3 100644 --- a/drivers/net/wireless/hostap/hostap_ap.h +++ b/drivers/net/wireless/hostap/hostap_ap.h @@ -233,7 +233,7 @@ struct hostap_tx_data { ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx); void hostap_handle_sta_release(void *ptr); void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb); -int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr); +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr_4addr *hdr); typedef enum { AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED } ap_rx_ret; @@ -241,13 +241,13 @@ ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats, int wds); -int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr, +int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr_4addr *hdr, struct ieee80211_crypt_data **crypt, void **sta_ptr); int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr); int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr); int hostap_add_sta(struct ap_data *ap, u8 *sta_addr); -int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr, +int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr_4addr *hdr, struct hostap_80211_rx_status *rx_stats); void hostap_update_rates(local_info_t *local); void hostap_add_wds_links(local_info_t *local); -- cgit v1.2.3 From 5bfc819b53ed67c76f33f969ab627070e85d87c1 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:51 -0500 Subject: [PATCH] ieee80211: Updated hostap to be compatible with extra_prefix_len changes tree 8c1676c8a15c08e6d4c718fc7cd42d9bf4cd8235 parent 0ccc3dd6469ed492578c184f47dde2baccde3593 author James Ketrenos 1126715240 -0500 committer James Ketrenos 1127316717 -0500 Updated hostap to be compatible with extra_prefix_len changes. Accomplished via: for i in hostap_ap.c hostap_80211_tx.c; do sed -i -e "s:\([.>]\)extra_prefix_len:\1extra_mpdu_prefix_len:g" \ -e "s:\([.>]\)extra_postfix_len:\1extra_mpdu_postfix_len:g" \ drivers/net/wireless/hostap/$i done CC: Jouni Malinen Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_80211_tx.c | 8 ++++---- drivers/net/wireless/hostap/hostap_ap.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c index 6db45430288c..9d24f8a38ac5 100644 --- a/drivers/net/wireless/hostap/hostap_80211_tx.c +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -317,10 +317,10 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, if (skb == NULL) return NULL; - if ((skb_headroom(skb) < crypt->ops->extra_prefix_len || - skb_tailroom(skb) < crypt->ops->extra_postfix_len) && - pskb_expand_head(skb, crypt->ops->extra_prefix_len, - crypt->ops->extra_postfix_len, GFP_ATOMIC)) { + if ((skb_headroom(skb) < crypt->ops->extra_mpdu_prefix_len || + skb_tailroom(skb) < crypt->ops->extra_mpdu_postfix_len) && + pskb_expand_head(skb, crypt->ops->extra_mpdu_prefix_len, + crypt->ops->extra_mpdu_postfix_len, GFP_ATOMIC)) { kfree_skb(skb); return NULL; } diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 070f7032edb5..087d9269af34 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1256,14 +1256,14 @@ static char * ap_auth_make_challenge(struct ap_data *ap) } skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN + - ap->crypt->extra_prefix_len + - ap->crypt->extra_postfix_len); + ap->crypt->extra_mpdu_prefix_len + + ap->crypt->extra_mpdu_postfix_len); if (skb == NULL) { kfree(tmpbuf); return NULL; } - skb_reserve(skb, ap->crypt->extra_prefix_len); + skb_reserve(skb, ap->crypt->extra_mpdu_prefix_len); memset(skb_put(skb, WLAN_AUTH_CHALLENGE_LEN), 0, WLAN_AUTH_CHALLENGE_LEN); if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) { @@ -1272,7 +1272,7 @@ static char * ap_auth_make_challenge(struct ap_data *ap) return NULL; } - memcpy(tmpbuf, skb->data + ap->crypt->extra_prefix_len, + memcpy(tmpbuf, skb->data + ap->crypt->extra_mpdu_prefix_len, WLAN_AUTH_CHALLENGE_LEN); dev_kfree_skb(skb); -- cgit v1.2.3 From 8a4ae7f2e24bf99b61082ca45de8e54e70300b9d Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Wed, 21 Sep 2005 23:22:10 -0400 Subject: forcedeth: add hardware tx checksumming Recent forcedeth nics support checksum offloading for tx. The attached patch, written by Ayaz Abdulla, adds the support to the driver. It also cleans up the handling of the three dma ring entry formats that are supported by the driver. Signed-off-By: Manfred Spraul Signed-off-By: Jeff Garzik --- drivers/net/forcedeth.c | 71 ++++++++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 6e042ecf6965..e5f480203675 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -95,6 +95,7 @@ * of nv_remove * 0.42: 06 Aug 2005: Fix lack of link speed initialization * in the second (and later) nv_open call + * 0.43: 10 Aug 2005: Add support for tx checksum. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -106,7 +107,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.41" +#define FORCEDETH_VERSION "0.43" #define DRV_NAME "forcedeth" #include @@ -145,6 +146,7 @@ #define DEV_NEED_LINKTIMER 0x0002 /* poll link settings. Relies on the timer irq */ #define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */ #define DEV_HAS_HIGH_DMA 0x0008 /* device supports 64bit dma */ +#define DEV_HAS_CHECKSUM 0x0010 /* device supports tx and rx checksum offloads */ enum { NvRegIrqStatus = 0x000, @@ -241,6 +243,9 @@ enum { #define NVREG_TXRXCTL_IDLE 0x0008 #define NVREG_TXRXCTL_RESET 0x0010 #define NVREG_TXRXCTL_RXCHECK 0x0400 +#define NVREG_TXRXCTL_DESC_1 0 +#define NVREG_TXRXCTL_DESC_2 0x02100 +#define NVREG_TXRXCTL_DESC_3 0x02200 NvRegMIIStatus = 0x180, #define NVREG_MIISTAT_ERROR 0x0001 #define NVREG_MIISTAT_LINKCHANGE 0x0008 @@ -335,6 +340,8 @@ typedef union _ring_type { /* error and valid are the same for both */ #define NV_TX2_ERROR (1<<30) #define NV_TX2_VALID (1<<31) +#define NV_TX2_CHECKSUM_L3 (1<<27) +#define NV_TX2_CHECKSUM_L4 (1<<26) #define NV_RX_DESCRIPTORVALID (1<<16) #define NV_RX_MISSEDFRAME (1<<17) @@ -417,14 +424,14 @@ typedef union _ring_type { /* * desc_ver values: - * This field has two purposes: - * - Newer nics uses a different ring layout. The layout is selected by - * comparing np->desc_ver with DESC_VER_xy. - * - It contains bits that are forced on when writing to NvRegTxRxControl. + * The nic supports three different descriptor types: + * - DESC_VER_1: Original + * - DESC_VER_2: support for jumbo frames. + * - DESC_VER_3: 64-bit format. */ -#define DESC_VER_1 0x0 -#define DESC_VER_2 (0x02100|NVREG_TXRXCTL_RXCHECK) -#define DESC_VER_3 (0x02200|NVREG_TXRXCTL_RXCHECK) +#define DESC_VER_1 1 +#define DESC_VER_2 2 +#define DESC_VER_3 3 /* PHY defines */ #define PHY_OUI_MARVELL 0x5043 @@ -491,6 +498,7 @@ struct fe_priv { u32 orig_mac[2]; u32 irqmask; u32 desc_ver; + u32 txrxctl_bits; void __iomem *base; @@ -786,10 +794,10 @@ static void nv_txrx_reset(struct net_device *dev) u8 __iomem *base = get_hwbase(dev); dprintk(KERN_DEBUG "%s: nv_txrx_reset\n", dev->name); - writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->desc_ver, base + NvRegTxRxControl); + writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl); pci_push(base); udelay(NV_TXRX_RESET_DELAY); - writel(NVREG_TXRXCTL_BIT2 | np->desc_ver, base + NvRegTxRxControl); + writel(NVREG_TXRXCTL_BIT2 | np->txrxctl_bits, base + NvRegTxRxControl); pci_push(base); } @@ -961,6 +969,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct fe_priv *np = get_nvpriv(dev); int nr = np->next_tx % TX_RING; + u32 tx_checksum = (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0); np->tx_skbuff[nr] = skb; np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len, @@ -976,10 +985,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irq(&np->lock); wmb(); if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); else - np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); - dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission.\n", + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); + dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission\n", dev->name, np->next_tx); { int j; @@ -997,7 +1006,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) if (np->next_tx - np->nic_tx >= TX_LIMIT_STOP) netif_stop_queue(dev); spin_unlock_irq(&np->lock); - writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl); + writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(get_hwbase(dev)); return 0; } @@ -1408,7 +1417,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT), base + NvRegRingSizes); pci_push(base); - writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl); + writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(base); /* restart rx engine */ @@ -2115,9 +2124,9 @@ static int nv_open(struct net_device *dev) /* 5) continue setup */ writel(np->linkspeed, base + NvRegLinkSpeed); writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3); - writel(np->desc_ver, base + NvRegTxRxControl); + writel(np->txrxctl_bits, base + NvRegTxRxControl); pci_push(base); - writel(NVREG_TXRXCTL_BIT1|np->desc_ver, base + NvRegTxRxControl); + writel(NVREG_TXRXCTL_BIT1|np->txrxctl_bits, base + NvRegTxRxControl); reg_delay(dev, NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31, NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX, KERN_INFO "open: SetupReg5, Bit 31 remained off\n"); @@ -2315,18 +2324,26 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n", pci_name(pci_dev)); } + np->txrxctl_bits = NVREG_TXRXCTL_DESC_3; } else if (id->driver_data & DEV_HAS_LARGEDESC) { /* packet format 2: supports jumbo frames */ np->desc_ver = DESC_VER_2; + np->txrxctl_bits = NVREG_TXRXCTL_DESC_2; } else { /* original packet format */ np->desc_ver = DESC_VER_1; + np->txrxctl_bits = NVREG_TXRXCTL_DESC_1; } np->pkt_limit = NV_PKTLIMIT_1; if (id->driver_data & DEV_HAS_LARGEDESC) np->pkt_limit = NV_PKTLIMIT_2; + if (id->driver_data & DEV_HAS_CHECKSUM) { + np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; + dev->features |= NETIF_F_HW_CSUM; + } + err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); if (!np->base) @@ -2527,35 +2544,35 @@ static struct pci_device_id pci_tbl[] = { }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12), @@ -2567,11 +2584,11 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, {0,}, }; -- cgit v1.2.3 From af9288a707b609cdb1069cfe5bde0d6567c12c31 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Thu, 22 Sep 2005 15:43:07 -0400 Subject: ieee80211: update orinoco, wl3501 drivers for latest struct naming --- drivers/net/wireless/orinoco.c | 2 +- drivers/net/wireless/wl3501.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 77e93a225530..fc2fa4dc3a08 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -636,7 +636,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) /* Read the frame header */ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(struct hermes_tx_descriptor) + - sizeof(struct ieee80211_hdr), + sizeof(struct ieee80211_hdr_4addr), fid, 0); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h index 7fcbe589c3f2..4303c50c2ab6 100644 --- a/drivers/net/wireless/wl3501.h +++ b/drivers/net/wireless/wl3501.h @@ -548,7 +548,7 @@ struct wl3501_80211_tx_plcp_hdr { struct wl3501_80211_tx_hdr { struct wl3501_80211_tx_plcp_hdr pclp_hdr; - struct ieee80211_hdr mac_hdr; + struct ieee80211_hdr_4addr mac_hdr; } __attribute__ ((packed)); /* -- cgit v1.2.3 From ef846bf04f4c9e1a68ab841e89931f8c26100874 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:07 -0400 Subject: [PATCH] orinoco: Remove inneeded system includes. Signed-off-by: Pavel Roskin Remove inneeded system includes. Most system includes are not needed. In particular, the hardware backends don't need anything network related. Some includes have been moved from local headers to the C files where they are actually used. Includes that have to be in the local headers are no longer from the C sources. Signed-off-by: Jeff Garzik --- drivers/net/wireless/airport.c | 19 +------------------ drivers/net/wireless/hermes.c | 11 ++--------- drivers/net/wireless/hermes.h | 3 +-- drivers/net/wireless/orinoco.c | 12 ------------ drivers/net/wireless/orinoco.h | 2 -- drivers/net/wireless/orinoco_cs.c | 16 +--------------- drivers/net/wireless/orinoco_nortel.c | 18 +----------------- drivers/net/wireless/orinoco_pci.c | 18 +----------------- drivers/net/wireless/orinoco_plx.c | 18 +----------------- drivers/net/wireless/orinoco_tmd.c | 18 +----------------- drivers/net/wireless/spectrum_cs.c | 16 +--------------- 11 files changed, 10 insertions(+), 141 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c index 9d496703c465..7b321f7cf358 100644 --- a/drivers/net/wireless/airport.c +++ b/drivers/net/wireless/airport.c @@ -15,28 +15,11 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include +#include #include -#include -#include #include "orinoco.h" diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index 21c3d0d227e6..eba0d9d2b7c5 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -39,17 +39,10 @@ */ #include - #include -#include -#include -#include -#include -#include -#include #include -#include -#include +#include +#include #include "hermes.h" diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index 8c9e874c9118..786613aaa58a 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -30,9 +30,8 @@ * access to the hermes_t structure, and to the hardware */ -#include #include -#include +#include /* * Limits and constants diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index fc2fa4dc3a08..f76fe3d10248 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -77,28 +77,16 @@ #define DRIVER_NAME "orinoco" #include - #include #include #include -#include -#include -#include -#include -#include #include -#include #include #include #include #include #include -#include -#include -#include - -#include "hermes.h" #include "hermes_rid.h" #include "orinoco.h" diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index c800563034a7..32530d435afb 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -9,8 +9,6 @@ #define DRIVER_VERSION "0.15rc2" -#include -#include #include #include #include diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 80920b1c6fcf..195c530f209f 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -14,30 +14,16 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include - +#include #include #include #include #include #include -#include -#include -#include - #include "orinoco.h" /********************************************************************/ diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index 86fa58e5cfac..d48ec24539f1 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -40,29 +40,13 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - #include -#include "hermes.h" #include "orinoco.h" #define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c index 42e03438291b..5362c214fc8e 100644 --- a/drivers/net/wireless/orinoco_pci.c +++ b/drivers/net/wireless/orinoco_pci.c @@ -93,28 +93,12 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - -#include -#include -#include -#include "hermes.h" #include "orinoco.h" /* All the magic there is from wlan-ng */ diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c index 7ab05b89fb3f..210e73776545 100644 --- a/drivers/net/wireless/orinoco_plx.c +++ b/drivers/net/wireless/orinoco_plx.c @@ -117,29 +117,13 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - #include -#include "hermes.h" #include "orinoco.h" #define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c index 85893f42445b..5e68b7026186 100644 --- a/drivers/net/wireless/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco_tmd.c @@ -53,29 +53,13 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - #include -#include "hermes.h" #include "orinoco.h" #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 63e00422d1a0..61199543aeb7 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -22,31 +22,17 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include - #include #include #include #include #include -#include -#include -#include - #include "orinoco.h" static unsigned char *primsym; -- cgit v1.2.3 From 4c08202547111e503eca4031ae9443159a79e2b2 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: Make nortel_pci_hw_init() static. Signed-off-by: Pavel Roskin Make nortel_pci_hw_init() static. Found by sparse. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_nortel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index d48ec24539f1..d8afd51ff8a5 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -92,7 +92,7 @@ static int nortel_pci_cor_reset(struct orinoco_private *priv) return 0; } -int nortel_pci_hw_init(struct nortel_pci_card *card) +static int nortel_pci_hw_init(struct nortel_pci_card *card) { int i; u32 reg; -- cgit v1.2.3 From f3cb4cc120177090b0ccc9fb20a12010de39ac8a Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: Fix memory leak and unneeded unlock in orinoco_join_ap() Signed-off-by: Pavel Roskin Fix memory leak and unneeded unlock in orinoco_join_ap() If orinoco_lock() fails, the code would still run orinoco_unlock(), instead of freeing the allocated memory. Found by sparse. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index f76fe3d10248..8b93b44291d4 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1046,7 +1046,7 @@ static void orinoco_join_ap(struct net_device *dev) return; if (orinoco_lock(priv, &flags) != 0) - goto out; + goto fail_lock; /* Sanity checks in case user changed something in the meantime */ if (! priv->bssid_fixed) @@ -1091,8 +1091,10 @@ static void orinoco_join_ap(struct net_device *dev) printk(KERN_ERR "%s: Error issuing join request\n", dev->name); out: - kfree(buf); orinoco_unlock(priv, &flags); + + fail_lock: + kfree(buf); } /* Send new BSSID to userspace */ -- cgit v1.2.3 From 8aeabc375041a5fe9c9be315472497b2e0547eed Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: orinoco_send_wevents() could return without unlocking. Signed-off-by: Pavel Roskin orinoco_send_wevents() could return without unlocking. Failure to read BSSID from the hardware would cause orinoco_send_wevents() to return with lock held. Found by sparse. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 8b93b44291d4..29cb5d81b67e 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1112,12 +1112,14 @@ static void orinoco_send_wevents(struct net_device *dev) err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, ETH_ALEN, NULL, wrqu.ap_addr.sa_data); if (err != 0) - return; + goto out; wrqu.ap_addr.sa_family = ARPHRD_ETHER; /* Send event to user space */ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + + out: orinoco_unlock(priv, &flags); } -- cgit v1.2.3 From 393da59834eef526fc6fd0df321e94344d7c49e3 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: Remove unneeded forward declarations. Signed-off-by: Pavel Roskin Remove unneeded forward declarations. Also reorder struct pcmcia_driver initialization to keep attach and detach together. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_cs.c | 15 +++------------ drivers/net/wireless/spectrum_cs.c | 15 +++------------ 2 files changed, 6 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 195c530f209f..dc1128a00971 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -80,17 +80,8 @@ static dev_link_t *dev_list; /* = NULL */ /* Function prototypes */ /********************************************************************/ -/* device methods */ -static int orinoco_cs_hard_reset(struct orinoco_private *priv); - -/* PCMCIA gumpf */ -static void orinoco_cs_config(dev_link_t * link); -static void orinoco_cs_release(dev_link_t * link); -static int orinoco_cs_event(event_t event, int priority, - event_callback_args_t * args); - -static dev_link_t *orinoco_cs_attach(void); -static void orinoco_cs_detach(dev_link_t *); +static void orinoco_cs_release(dev_link_t *link); +static void orinoco_cs_detach(dev_link_t *link); /********************************************************************/ /* Device methods */ @@ -675,8 +666,8 @@ static struct pcmcia_driver orinoco_driver = { .name = DRIVER_NAME, }, .attach = orinoco_cs_attach, - .event = orinoco_cs_event, .detach = orinoco_cs_detach, + .event = orinoco_cs_event, .id_table = orinoco_cs_ids, }; diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 61199543aeb7..ceed0241adcd 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -89,17 +89,8 @@ static dev_link_t *dev_list; /* = NULL */ /* Function prototypes */ /********************************************************************/ -/* device methods */ -static int spectrum_cs_hard_reset(struct orinoco_private *priv); - -/* PCMCIA gumpf */ -static void spectrum_cs_config(dev_link_t * link); -static void spectrum_cs_release(dev_link_t * link); -static int spectrum_cs_event(event_t event, int priority, - event_callback_args_t * args); - -static dev_link_t *spectrum_cs_attach(void); -static void spectrum_cs_detach(dev_link_t *); +static void spectrum_cs_release(dev_link_t *link); +static void spectrum_cs_detach(dev_link_t *link); /********************************************************************/ /* Firmware downloader */ @@ -1058,8 +1049,8 @@ static struct pcmcia_driver orinoco_driver = { .name = DRIVER_NAME, }, .attach = spectrum_cs_attach, - .event = spectrum_cs_event, .detach = spectrum_cs_detach, + .event = spectrum_cs_event, .id_table = spectrum_cs_ids, }; -- cgit v1.2.3 From d133ae4cd6a3c75c31b1630f906cc9979a11077f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: Annotate endianess of variables and structure members. Signed-off-by: Pavel Roskin Annotate endianess of variables and structure members. Don't reuse variables for both host-endian and little-endian data. Minor comment changes in affected structures. Signed-off-by: Jeff Garzik --- drivers/net/wireless/hermes.h | 108 ++++++++++++++++++------------------- drivers/net/wireless/orinoco.c | 62 ++++++++++----------- drivers/net/wireless/orinoco.h | 6 +-- drivers/net/wireless/spectrum_cs.c | 20 +++---- 4 files changed, 99 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index 786613aaa58a..ad28e3294360 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -191,13 +191,13 @@ #define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ struct hermes_tx_descriptor { - u16 status; - u16 reserved1; - u16 reserved2; - u32 sw_support; + __le16 status; + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; u8 retry_count; u8 tx_rate; - u16 tx_control; + __le16 tx_control; } __attribute__ ((packed)); #define HERMES_TXSTAT_RETRYERR (0x0001) @@ -221,60 +221,60 @@ struct hermes_tx_descriptor { #define HERMES_INQ_SEC_STAT_AGERE (0xF202) struct hermes_tallies_frame { - u16 TxUnicastFrames; - u16 TxMulticastFrames; - u16 TxFragments; - u16 TxUnicastOctets; - u16 TxMulticastOctets; - u16 TxDeferredTransmissions; - u16 TxSingleRetryFrames; - u16 TxMultipleRetryFrames; - u16 TxRetryLimitExceeded; - u16 TxDiscards; - u16 RxUnicastFrames; - u16 RxMulticastFrames; - u16 RxFragments; - u16 RxUnicastOctets; - u16 RxMulticastOctets; - u16 RxFCSErrors; - u16 RxDiscards_NoBuffer; - u16 TxDiscardsWrongSA; - u16 RxWEPUndecryptable; - u16 RxMsgInMsgFragments; - u16 RxMsgInBadMsgFragments; + __le16 TxUnicastFrames; + __le16 TxMulticastFrames; + __le16 TxFragments; + __le16 TxUnicastOctets; + __le16 TxMulticastOctets; + __le16 TxDeferredTransmissions; + __le16 TxSingleRetryFrames; + __le16 TxMultipleRetryFrames; + __le16 TxRetryLimitExceeded; + __le16 TxDiscards; + __le16 RxUnicastFrames; + __le16 RxMulticastFrames; + __le16 RxFragments; + __le16 RxUnicastOctets; + __le16 RxMulticastOctets; + __le16 RxFCSErrors; + __le16 RxDiscards_NoBuffer; + __le16 TxDiscardsWrongSA; + __le16 RxWEPUndecryptable; + __le16 RxMsgInMsgFragments; + __le16 RxMsgInBadMsgFragments; /* Those last are probably not available in very old firmwares */ - u16 RxDiscards_WEPICVError; - u16 RxDiscards_WEPExcluded; + __le16 RxDiscards_WEPICVError; + __le16 RxDiscards_WEPExcluded; } __attribute__ ((packed)); /* Grabbed from wlan-ng - Thanks Mark... - Jean II * This is the result of a scan inquiry command */ /* Structure describing info about an Access Point */ struct prism2_scan_apinfo { - u16 channel; /* Channel where the AP sits */ - u16 noise; /* Noise level */ - u16 level; /* Signal level */ + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - u16 beacon_interv; /* Beacon interval */ - u16 capabilities; /* Capabilities */ - u16 essid_len; /* ESSID length */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ u8 rates[10]; /* Bit rate supported */ - u16 proberesp_rate; /* Data rate of the response frame */ - u16 atim; /* ATIM window time, Kus (hostscan only) */ + __le16 proberesp_rate; /* Data rate of the response frame */ + __le16 atim; /* ATIM window time, Kus (hostscan only) */ } __attribute__ ((packed)); /* Same stuff for the Lucent/Agere card. * Thanks to h1kari - Jean II */ struct agere_scan_apinfo { - u16 channel; /* Channel where the AP sits */ - u16 noise; /* Noise level */ - u16 level; /* Signal level */ + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - u16 beacon_interv; /* Beacon interval */ - u16 capabilities; /* Capabilities */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - u16 essid_len; /* ESSID length */ + __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ } __attribute__ ((packed)); @@ -282,16 +282,16 @@ struct agere_scan_apinfo { struct symbol_scan_apinfo { u8 channel; /* Channel where the AP sits */ u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ - u16 noise; /* Noise level */ - u16 level; /* Signal level */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - u16 beacon_interv; /* Beacon interval */ - u16 capabilities; /* Capabilities */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - u16 essid_len; /* ESSID length */ + __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ - u16 rates[5]; /* Bit rate supported */ - u16 basic_rates; /* Basic rates bitmask */ + __le16 rates[5]; /* Bit rate supported */ + __le16 basic_rates; /* Basic rates bitmask */ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ } __attribute__ ((packed)); @@ -311,7 +311,7 @@ union hermes_scan_info { #define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) struct hermes_linkstatus { - u16 linkstatus; /* Link status */ + __le16 linkstatus; /* Link status */ } __attribute__ ((packed)); struct hermes_response { @@ -320,8 +320,8 @@ struct hermes_response { /* "ID" structure - used for ESSID and station nickname */ struct hermes_idstring { - u16 len; - u16 val[16]; + __le16 len; + __le16 val[16]; } __attribute__ ((packed)); struct hermes_multicast { @@ -446,7 +446,7 @@ static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) { - u16 rec; + __le16 rec; int err; err = HERMES_READ_RECORD(hw, bap, rid, &rec); @@ -456,7 +456,7 @@ static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word) { - u16 rec = cpu_to_le16(word); + __le16 rec = cpu_to_le16(word); return HERMES_WRITE_RECORD(hw, bap, rid, &rec); } diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 29cb5d81b67e..1ae301c62281 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -202,31 +202,32 @@ static struct { /********************************************************************/ /* Used in Event handling. - * We avoid nested structres as they break on ARM -- Moustafa */ + * We avoid nested structures as they break on ARM -- Moustafa */ struct hermes_tx_descriptor_802_11 { /* hermes_tx_descriptor */ - u16 status; - u16 reserved1; - u16 reserved2; - u32 sw_support; + __le16 status; + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; u8 retry_count; u8 tx_rate; - u16 tx_control; + __le16 tx_control; - /* ieee802_11_hdr */ - u16 frame_ctl; - u16 duration_id; + /* ieee80211_hdr */ + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 addr4[ETH_ALEN]; - u16 data_len; + + __le16 data_len; /* ethhdr */ - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ - unsigned char h_source[ETH_ALEN]; /* source ether addr */ - unsigned short h_proto; /* packet type ID field */ + u8 h_dest[ETH_ALEN]; /* destination eth addr */ + u8 h_source[ETH_ALEN]; /* source ether addr */ + __be16 h_proto; /* packet type ID field */ /* p8022_hdr */ u8 dsap; @@ -234,31 +235,31 @@ struct hermes_tx_descriptor_802_11 { u8 ctrl; u8 oui[3]; - u16 ethertype; + __be16 ethertype; } __attribute__ ((packed)); /* Rx frame header except compatibility 802.3 header */ struct hermes_rx_descriptor { /* Control */ - u16 status; - u32 time; + __le16 status; + __le32 time; u8 silence; u8 signal; u8 rate; u8 rxflow; - u32 reserved; + __le32 reserved; /* 802.11 header */ - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 addr4[ETH_ALEN]; /* Data length */ - u16 data_len; + __le16 data_len; } __attribute__ ((packed)); /********************************************************************/ @@ -389,7 +390,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) } } else { struct { - u16 qual, signal, noise; + __le16 qual, signal, noise; } __attribute__ ((packed)) cq; err = HERMES_READ_RECORD(hw, USER_BAP, @@ -615,6 +616,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; u16 fid = hermes_read_regn(hw, TXCOMPLFID); + u16 status; struct hermes_tx_descriptor_802_11 hdr; int err = 0; @@ -644,8 +646,8 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) * exceeded, because that's the only status that really mean * that this particular node went away. * Other errors means that *we* screwed up. - Jean II */ - hdr.status = le16_to_cpu(hdr.status); - if (hdr.status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + status = le16_to_cpu(hdr.status); + if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { union iwreq_data wrqu; /* Copy 802.11 dest address. @@ -1031,7 +1033,7 @@ static void orinoco_join_ap(struct net_device *dev) unsigned long flags; struct join_req { u8 bssid[ETH_ALEN]; - u16 channel; + __le16 channel; } __attribute__ ((packed)) req; const int atom_len = offsetof(struct prism2_scan_apinfo, atim); struct prism2_scan_apinfo *atom = NULL; @@ -1128,8 +1130,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) struct orinoco_private *priv = netdev_priv(dev); u16 infofid; struct { - u16 len; - u16 type; + __le16 len; + __le16 type; } __attribute__ ((packed)) info; int len, type; int err; @@ -3905,7 +3907,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, HERMES_HOSTSCAN_SYMBOL_BCAST); break; case FIRMWARE_TYPE_INTERSIL: { - u16 req[3]; + __le16 req[3]; req[0] = cpu_to_le16(0x3fff); /* All channels */ req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ @@ -3979,7 +3981,7 @@ static inline int orinoco_translate_scan(struct net_device *dev, case FIRMWARE_TYPE_INTERSIL: offset = 4; if (priv->has_hostscan) { - atom_len = le16_to_cpup((u16 *)scan); + atom_len = le16_to_cpup((__le16 *)scan); /* Sanity check for atom_len */ if (atom_len < sizeof(struct prism2_scan_apinfo)) { printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n", diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 32530d435afb..6920ead11449 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -27,7 +27,7 @@ #define ORINOCO_MAX_KEYS 4 struct orinoco_key { - u16 len; /* always stored as little-endian */ + __le16 len; /* always stored as little-endian */ char data[ORINOCO_MAX_KEY_SIZE]; } __attribute__ ((packed)); @@ -35,14 +35,14 @@ struct header_struct { /* 802.3 */ u8 dest[ETH_ALEN]; u8 src[ETH_ALEN]; - u16 len; + __be16 len; /* 802.2 */ u8 dsap; u8 ssap; u8 ctrl; /* SNAP */ u8 oui[3]; - u16 ethertype; + unsigned short ethertype; } __attribute__ ((packed)); typedef enum { diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index ceed0241adcd..b1bbc8e8e91f 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -138,8 +138,8 @@ static void spectrum_cs_detach(dev_link_t *link); * Each block has the following structure. */ struct dblock { - u32 _addr; /* adapter address where to write the block */ - u16 _len; /* length of the data only, in bytes */ + __le32 _addr; /* adapter address where to write the block */ + __le16 _len; /* length of the data only, in bytes */ char data[0]; /* data to be written */ } __attribute__ ((packed)); @@ -149,9 +149,9 @@ struct dblock { * items with matching ID should be written. */ struct pdr { - u32 _id; /* record ID */ - u32 _addr; /* adapter address where to write the data */ - u32 _len; /* expected length of the data, in bytes */ + __le32 _id; /* record ID */ + __le32 _addr; /* adapter address where to write the data */ + __le32 _len; /* expected length of the data, in bytes */ char next[0]; /* next PDR starts here */ } __attribute__ ((packed)); @@ -162,8 +162,8 @@ struct pdr { * be plugged into the secondary firmware. */ struct pdi { - u16 _len; /* length of ID and data, in words */ - u16 _id; /* record ID */ + __le16 _len; /* length of ID and data, in words */ + __le16 _id; /* record ID */ char data[0]; /* plug data */ } __attribute__ ((packed));; @@ -370,7 +370,7 @@ spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) /* Read PDA from the adapter */ static int -spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len) +spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len) { int ret; int pda_size; @@ -401,7 +401,7 @@ spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len) /* Parse PDA and write the records into the adapter */ static int spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, - u16 *pda) + __le16 *pda) { int ret; struct pdi *pdi; @@ -467,7 +467,7 @@ spectrum_dl_image(hermes_t *hw, dev_link_t *link, const struct dblock *first_block; /* Plug Data Area (PDA) */ - u16 pda[PDA_WORDS]; + __le16 pda[PDA_WORDS]; /* Binary block begins after the 0x1A marker */ ptr = image; -- cgit v1.2.3 From 48ca703807eba616ad5e384b40e27514bd341a3d Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: Read only needed data in __orinoco_ev_txexc(). Signed-off-by: Pavel Roskin Read only needed data in __orinoco_ev_txexc(). Don't read the 802.11 header beyond addr1. The rest of the frame is not used currently. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 1ae301c62281..78afbc7f08be 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -623,10 +623,10 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) if (fid == DUMMY_FID) return; /* Nothing's really happened */ - /* Read the frame header */ + /* Read part of the frame header - we need status and addr1 */ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, - sizeof(struct hermes_tx_descriptor) + - sizeof(struct ieee80211_hdr_4addr), + offsetof(struct hermes_tx_descriptor_802_11, + addr2), fid, 0); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); -- cgit v1.2.3 From acc4b985a6f8f22a0e826692894a4af234764001 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH] orinoco: Bump version to 0.15rc3. Signed-off-by: Pavel Roskin Bump version to 0.15rc3. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 6920ead11449..7a17bb31fc89 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -7,7 +7,7 @@ #ifndef _ORINOCO_H #define _ORINOCO_H -#define DRIVER_VERSION "0.15rc2" +#define DRIVER_VERSION "0.15rc3" #include #include -- cgit v1.2.3 From bb40dcbb0fcebe1df08ba261483fcc38b307d063 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 23 Sep 2005 22:54:21 -0400 Subject: [netdrvr gianfar] use new phy layer Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 2 +- drivers/net/gianfar.c | 412 ++++++-------------------- drivers/net/gianfar.h | 30 +- drivers/net/gianfar_ethtool.c | 100 ++++--- drivers/net/gianfar_mii.c | 219 ++++++++++++++ drivers/net/gianfar_mii.h | 45 +++ drivers/net/gianfar_phy.c | 661 ------------------------------------------ drivers/net/gianfar_phy.h | 213 -------------- 9 files changed, 433 insertions(+), 1251 deletions(-) create mode 100644 drivers/net/gianfar_mii.c create mode 100644 drivers/net/gianfar_mii.h delete mode 100644 drivers/net/gianfar_phy.c delete mode 100644 drivers/net/gianfar_phy.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ff3fccd7513b..4739a63601eb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2075,6 +2075,8 @@ config SPIDER_NET config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx + select PHYLIB + select PHYCONTROL help This driver supports the Gigabit TSEC on the MPC85xx family of chips, and the FEC on the 8540 diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e6acba68923a..39b17cb4f86e 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o -gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_phy.o +gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o # # link order important here diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 6518334b9280..ae5a2ed3b264 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -29,12 +29,7 @@ * define the configuration needed by the board are defined in a * board structure in arch/ppc/platforms (though I do not * discount the possibility that other architectures could one - * day be supported. One assumption the driver currently makes - * is that the PHY is configured in such a way to advertise all - * capabilities. This is a sensible default, and on certain - * PHYs, changing this default encounters substantial errata - * issues. Future versions may remove this requirement, but for - * now, it is best for the firmware to ensure this is the case. + * day be supported. * * The Gianfar Ethernet Controller uses a ring of buffer * descriptors. The beginning is indicated by a register @@ -47,7 +42,7 @@ * corresponding bit in the IMASK register is also set (if * interrupt coalescing is active, then the interrupt may not * happen immediately, but will wait until either a set number - * of frames or amount of time have passed.). In NAPI, the + * of frames or amount of time have passed). In NAPI, the * interrupt handler will signal there is work to be done, and * exit. Without NAPI, the packet(s) will be handled * immediately. Both methods will start at the last known empty @@ -75,6 +70,7 @@ #include #include #include +#include #include #include #include @@ -97,9 +93,11 @@ #include #include #include +#include +#include #include "gianfar.h" -#include "gianfar_phy.h" +#include "gianfar_mii.h" #define TX_TIMEOUT (1*HZ) #define SKB_ALLOC_TIMEOUT 1000000 @@ -113,9 +111,8 @@ #endif const char gfar_driver_name[] = "Gianfar Ethernet"; -const char gfar_driver_version[] = "1.1"; +const char gfar_driver_version[] = "1.2"; -int startup_gfar(struct net_device *dev); static int gfar_enet_open(struct net_device *dev); static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); static void gfar_timeout(struct net_device *dev); @@ -126,17 +123,13 @@ static int gfar_set_mac_address(struct net_device *dev); static int gfar_change_mtu(struct net_device *dev, int new_mtu); static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs); -static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static void gfar_phy_change(void *data); -static void gfar_phy_timer(unsigned long data); static void adjust_link(struct net_device *dev); static void init_registers(struct net_device *dev); static int init_phy(struct net_device *dev); static int gfar_probe(struct device *device); static int gfar_remove(struct device *device); -void free_skb_resources(struct gfar_private *priv); +static void free_skb_resources(struct gfar_private *priv); static void gfar_set_multi(struct net_device *dev); static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); #ifdef CONFIG_GFAR_NAPI @@ -144,7 +137,6 @@ static int gfar_poll(struct net_device *dev, int *budget); #endif int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); -static void gfar_phy_startup_timer(unsigned long data); static void gfar_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); @@ -162,6 +154,9 @@ int gfar_uses_fcb(struct gfar_private *priv) else return 0; } + +/* Set up the ethernet device structure, private data, + * and anything else we need before we start */ static int gfar_probe(struct device *device) { u32 tempval; @@ -175,7 +170,7 @@ static int gfar_probe(struct device *device) einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; - if (einfo == NULL) { + if (NULL == einfo) { printk(KERN_ERR "gfar %d: Missing additional data!\n", pdev->id); @@ -185,7 +180,7 @@ static int gfar_probe(struct device *device) /* Create an ethernet device instance */ dev = alloc_etherdev(sizeof (*priv)); - if (dev == NULL) + if (NULL == dev) return -ENOMEM; priv = netdev_priv(dev); @@ -207,20 +202,11 @@ static int gfar_probe(struct device *device) priv->regs = (struct gfar *) ioremap(r->start, sizeof (struct gfar)); - if (priv->regs == NULL) { + if (NULL == priv->regs) { err = -ENOMEM; goto regs_fail; } - /* Set the PHY base address */ - priv->phyregs = (struct gfar *) - ioremap(einfo->phy_reg_addr, sizeof (struct gfar)); - - if (priv->phyregs == NULL) { - err = -ENOMEM; - goto phy_regs_fail; - } - spin_lock_init(&priv->lock); dev_set_drvdata(device, dev); @@ -386,12 +372,10 @@ static int gfar_probe(struct device *device) return 0; register_fail: - iounmap((void *) priv->phyregs); -phy_regs_fail: iounmap((void *) priv->regs); regs_fail: free_netdev(dev); - return -ENOMEM; + return err; } static int gfar_remove(struct device *device) @@ -402,108 +386,41 @@ static int gfar_remove(struct device *device) dev_set_drvdata(device, NULL); iounmap((void *) priv->regs); - iounmap((void *) priv->phyregs); free_netdev(dev); return 0; } -/* Configure the PHY for dev. - * returns 0 if success. -1 if failure +/* Initializes driver's PHY state, and attaches to the PHY. + * Returns 0 on success. */ static int init_phy(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct phy_info *curphy; - unsigned int timeout = PHY_INIT_TIMEOUT; - struct gfar *phyregs = priv->phyregs; - struct gfar_mii_info *mii_info; - int err; + uint gigabit_support = + priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? + SUPPORTED_1000baseT_Full : 0; + struct phy_device *phydev; priv->oldlink = 0; priv->oldspeed = 0; priv->oldduplex = -1; - mii_info = kmalloc(sizeof(struct gfar_mii_info), - GFP_KERNEL); - - if(NULL == mii_info) { - if (netif_msg_ifup(priv)) - printk(KERN_ERR "%s: Could not allocate mii_info\n", - dev->name); - return -ENOMEM; - } - - mii_info->speed = SPEED_1000; - mii_info->duplex = DUPLEX_FULL; - mii_info->pause = 0; - mii_info->link = 1; - - mii_info->advertising = (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full); - mii_info->autoneg = 1; + phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0); - spin_lock_init(&mii_info->mdio_lock); - - mii_info->mii_id = priv->einfo->phyid; - - mii_info->dev = dev; - - mii_info->mdio_read = &read_phy_reg; - mii_info->mdio_write = &write_phy_reg; - - priv->mii_info = mii_info; - - /* Reset the management interface */ - gfar_write(&phyregs->miimcfg, MIIMCFG_RESET); - - /* Setup the MII Mgmt clock speed */ - gfar_write(&phyregs->miimcfg, MIIMCFG_INIT_VALUE); - - /* Wait until the bus is free */ - while ((gfar_read(&phyregs->miimind) & MIIMIND_BUSY) && - timeout--) - cpu_relax(); - - if(timeout <= 0) { - printk(KERN_ERR "%s: The MII Bus is stuck!\n", - dev->name); - err = -1; - goto bus_fail; - } - - /* get info for this PHY */ - curphy = get_phy_info(priv->mii_info); - - if (curphy == NULL) { - if (netif_msg_ifup(priv)) - printk(KERN_ERR "%s: No PHY found\n", dev->name); - err = -1; - goto no_phy; + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); } - mii_info->phyinfo = curphy; + /* Remove any features not supported by the controller */ + phydev->supported &= (GFAR_SUPPORTED | gigabit_support); + phydev->advertising = phydev->supported; - /* Run the commands which initialize the PHY */ - if(curphy->init) { - err = curphy->init(priv->mii_info); - - if (err) - goto phy_init_fail; - } + priv->phydev = phydev; return 0; - -phy_init_fail: -no_phy: -bus_fail: - kfree(mii_info); - - return err; } static void init_registers(struct net_device *dev) @@ -603,24 +520,13 @@ void stop_gfar(struct net_device *dev) struct gfar *regs = priv->regs; unsigned long flags; + phy_stop(priv->phydev); + /* Lock it down */ spin_lock_irqsave(&priv->lock, flags); - /* Tell the kernel the link is down */ - priv->mii_info->link = 0; - adjust_link(dev); - gfar_halt(dev); - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - /* Clear any pending interrupts */ - mii_clear_phy_interrupt(priv->mii_info); - - /* Disable PHY Interrupts */ - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_DISABLED); - } - spin_unlock_irqrestore(&priv->lock, flags); /* Free the IRQs */ @@ -629,13 +535,7 @@ void stop_gfar(struct net_device *dev) free_irq(priv->interruptTransmit, dev); free_irq(priv->interruptReceive, dev); } else { - free_irq(priv->interruptTransmit, dev); - } - - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - free_irq(priv->einfo->interruptPHY, dev); - } else { - del_timer_sync(&priv->phy_info_timer); + free_irq(priv->interruptTransmit, dev); } free_skb_resources(priv); @@ -649,7 +549,7 @@ void stop_gfar(struct net_device *dev) /* If there are any tx skbs or rx skbs still around, free them. * Then free tx_skbuff and rx_skbuff */ -void free_skb_resources(struct gfar_private *priv) +static void free_skb_resources(struct gfar_private *priv) { struct rxbd8 *rxbdp; struct txbd8 *txbdp; @@ -770,7 +670,7 @@ int startup_gfar(struct net_device *dev) (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * priv->tx_ring_size, GFP_KERNEL); - if (priv->tx_skbuff == NULL) { + if (NULL == priv->tx_skbuff) { if (netif_msg_ifup(priv)) printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", dev->name); @@ -785,7 +685,7 @@ int startup_gfar(struct net_device *dev) (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * priv->rx_ring_size, GFP_KERNEL); - if (priv->rx_skbuff == NULL) { + if (NULL == priv->rx_skbuff) { if (netif_msg_ifup(priv)) printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", dev->name); @@ -879,13 +779,7 @@ int startup_gfar(struct net_device *dev) } } - /* Set up the PHY change work queue */ - INIT_WORK(&priv->tq, gfar_phy_change, dev); - - init_timer(&priv->phy_info_timer); - priv->phy_info_timer.function = &gfar_phy_startup_timer; - priv->phy_info_timer.data = (unsigned long) priv->mii_info; - mod_timer(&priv->phy_info_timer, jiffies + HZ); + phy_start(priv->phydev); /* Configure the coalescing support */ if (priv->txcoalescing) @@ -933,11 +827,6 @@ tx_skb_fail: priv->tx_bd_base, gfar_read(®s->tbase0)); - if (priv->mii_info->phyinfo->close) - priv->mii_info->phyinfo->close(priv->mii_info); - - kfree(priv->mii_info); - return err; } @@ -1035,7 +924,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) txbdp->status &= TXBD_WRAP; /* Set up checksumming */ - if ((dev->features & NETIF_F_IP_CSUM) + if ((dev->features & NETIF_F_IP_CSUM) && (CHECKSUM_HW == skb->ip_summed)) { fcb = gfar_add_fcb(skb, txbdp); gfar_tx_checksum(skb, fcb); @@ -1103,11 +992,9 @@ static int gfar_close(struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); stop_gfar(dev); - /* Shutdown the PHY */ - if (priv->mii_info->phyinfo->close) - priv->mii_info->phyinfo->close(priv->mii_info); - - kfree(priv->mii_info); + /* Disconnect from the PHY */ + phy_disconnect(priv->phydev); + priv->phydev = NULL; netif_stop_queue(dev); @@ -1343,7 +1230,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) while ((!skb) && timeout--) skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT); - if (skb == NULL) + if (NULL == skb) return NULL; /* We need the data buffer to be aligned properly. We will reserve @@ -1490,7 +1377,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, struct gfar_private *priv = netdev_priv(dev); struct rxfcb *fcb = NULL; - if (skb == NULL) { + if (NULL == skb) { if (netif_msg_rx_err(priv)) printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name); priv->stats.rx_dropped++; @@ -1718,131 +1605,9 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct gfar_private *priv = netdev_priv(dev); - - /* Clear the interrupt */ - mii_clear_phy_interrupt(priv->mii_info); - - /* Disable PHY interrupts */ - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_DISABLED); - - /* Schedule the phy change */ - schedule_work(&priv->tq); - - return IRQ_HANDLED; -} - -/* Scheduled by the phy_interrupt/timer to handle PHY changes */ -static void gfar_phy_change(void *data) -{ - struct net_device *dev = (struct net_device *) data; - struct gfar_private *priv = netdev_priv(dev); - int result = 0; - - /* Delay to give the PHY a chance to change the - * register state */ - msleep(1); - - /* Update the link, speed, duplex */ - result = priv->mii_info->phyinfo->read_status(priv->mii_info); - - /* Adjust the known status as long as the link - * isn't still coming up */ - if((0 == result) || (priv->mii_info->link == 0)) - adjust_link(dev); - - /* Reenable interrupts, if needed */ - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_ENABLED); -} - -/* Called every so often on systems that don't interrupt - * the core for PHY changes */ -static void gfar_phy_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct gfar_private *priv = netdev_priv(dev); - - schedule_work(&priv->tq); - - mod_timer(&priv->phy_info_timer, jiffies + - GFAR_PHY_CHANGE_TIME * HZ); -} - -/* Keep trying aneg for some time - * If, after GFAR_AN_TIMEOUT seconds, it has not - * finished, we switch to forced. - * Either way, once the process has completed, we either - * request the interrupt, or switch the timer over to - * using gfar_phy_timer to check status */ -static void gfar_phy_startup_timer(unsigned long data) -{ - int result; - static int secondary = GFAR_AN_TIMEOUT; - struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data; - struct gfar_private *priv = netdev_priv(mii_info->dev); - - /* Configure the Auto-negotiation */ - result = mii_info->phyinfo->config_aneg(mii_info); - - /* If autonegotiation failed to start, and - * we haven't timed out, reset the timer, and return */ - if (result && secondary--) { - mod_timer(&priv->phy_info_timer, jiffies + HZ); - return; - } else if (result) { - /* Couldn't start autonegotiation. - * Try switching to forced */ - mii_info->autoneg = 0; - result = mii_info->phyinfo->config_aneg(mii_info); - - /* Forcing failed! Give up */ - if(result) { - if (netif_msg_link(priv)) - printk(KERN_ERR "%s: Forcing failed!\n", - mii_info->dev->name); - return; - } - } - - /* Kill the timer so it can be restarted */ - del_timer_sync(&priv->phy_info_timer); - - /* Grab the PHY interrupt, if necessary/possible */ - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - if (request_irq(priv->einfo->interruptPHY, - phy_interrupt, - SA_SHIRQ, - "phy_interrupt", - mii_info->dev) < 0) { - if (netif_msg_intr(priv)) - printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n", - mii_info->dev->name, - priv->einfo->interruptPHY); - } else { - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_ENABLED); - return; - } - } - - /* Start the timer again, this time in order to - * handle a change in status */ - init_timer(&priv->phy_info_timer); - priv->phy_info_timer.function = &gfar_phy_timer; - priv->phy_info_timer.data = (unsigned long) mii_info->dev; - mod_timer(&priv->phy_info_timer, jiffies + - GFAR_PHY_CHANGE_TIME * HZ); -} - /* Called every time the controller might need to be made * aware of new link state. The PHY code conveys this - * information through variables in the priv structure, and this + * information through variables in the phydev structure, and this * function converts those variables into the appropriate * register values, and can bring down the device if needed. */ @@ -1850,84 +1615,68 @@ static void adjust_link(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); struct gfar *regs = priv->regs; - u32 tempval; - struct gfar_mii_info *mii_info = priv->mii_info; + unsigned long flags; + struct phy_device *phydev = priv->phydev; + int new_state = 0; + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 tempval = gfar_read(®s->maccfg2); - if (mii_info->link) { /* Now we make sure that we can be in full duplex mode. * If not, we operate in half-duplex mode. */ - if (mii_info->duplex != priv->oldduplex) { - if (!(mii_info->duplex)) { - tempval = gfar_read(®s->maccfg2); + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) tempval &= ~(MACCFG2_FULL_DUPLEX); - gfar_write(®s->maccfg2, tempval); - - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Half Duplex\n", - dev->name); - } else { - tempval = gfar_read(®s->maccfg2); + else tempval |= MACCFG2_FULL_DUPLEX; - gfar_write(®s->maccfg2, tempval); - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Full Duplex\n", - dev->name); - } - - priv->oldduplex = mii_info->duplex; + priv->oldduplex = phydev->duplex; } - if (mii_info->speed != priv->oldspeed) { - switch (mii_info->speed) { + if (phydev->speed != priv->oldspeed) { + new_state = 1; + switch (phydev->speed) { case 1000: - tempval = gfar_read(®s->maccfg2); tempval = ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); - gfar_write(®s->maccfg2, tempval); break; case 100: case 10: - tempval = gfar_read(®s->maccfg2); tempval = ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); - gfar_write(®s->maccfg2, tempval); break; default: if (netif_msg_link(priv)) printk(KERN_WARNING - "%s: Ack! Speed (%d) is not 10/100/1000!\n", - dev->name, mii_info->speed); + "%s: Ack! Speed (%d) is not 10/100/1000!\n", + dev->name, phydev->speed); break; } - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Speed %dBT\n", dev->name, - mii_info->speed); - - priv->oldspeed = mii_info->speed; + priv->oldspeed = phydev->speed; } + gfar_write(®s->maccfg2, tempval); + if (!priv->oldlink) { - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Link is up\n", dev->name); + new_state = 1; priv->oldlink = 1; - netif_carrier_on(dev); netif_schedule(dev); } - } else { - if (priv->oldlink) { - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Link is down\n", - dev->name); - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - netif_carrier_off(dev); - } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->oldspeed = 0; + priv->oldduplex = -1; } -} + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); +} /* Update the hash table based on the current list of multicast * addresses we subscribe to. Also, change the promiscuity of @@ -2122,12 +1871,23 @@ static struct device_driver gfar_driver = { static int __init gfar_init(void) { - return driver_register(&gfar_driver); + int err = gfar_mdio_init(); + + if (err) + return err; + + err = driver_register(&gfar_driver); + + if (err) + gfar_mdio_exit(); + + return err; } static void __exit gfar_exit(void) { driver_unregister(&gfar_driver); + gfar_mdio_exit(); } module_init(gfar_init); diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 28af087d9fbb..c77ca6c0d04a 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -17,7 +17,6 @@ * * Still left to do: * -Add support for module parameters - * -Add support for ethtool -s * -Add patch for ethtool phys id */ #ifndef __GIANFAR_H @@ -37,7 +36,8 @@ #include #include #include -#include +#include +#include #include #include @@ -48,7 +48,8 @@ #include #include #include -#include "gianfar_phy.h" +#include +#include "gianfar_mii.h" /* The maximum number of packets to be handled in one call of gfar_poll */ #define GFAR_DEV_WEIGHT 64 @@ -73,7 +74,7 @@ #define PHY_INIT_TIMEOUT 100000 #define GFAR_PHY_CHANGE_TIME 2 -#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.1, " +#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.2, " #define DRV_NAME "gfar-enet" extern const char gfar_driver_name[]; extern const char gfar_driver_version[]; @@ -578,12 +579,7 @@ struct gfar { u32 hafdup; /* 0x.50c - Half Duplex Register */ u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */ u8 res18[12]; - u32 miimcfg; /* 0x.520 - MII Management Configuration Register */ - u32 miimcom; /* 0x.524 - MII Management Command Register */ - u32 miimadd; /* 0x.528 - MII Management Address Register */ - u32 miimcon; /* 0x.52c - MII Management Control Register */ - u32 miimstat; /* 0x.530 - MII Management Status Register */ - u32 miimind; /* 0x.534 - MII Management Indicator Register */ + u8 gfar_mii_regs[24]; /* See gianfar_phy.h */ u8 res19[4]; u32 ifstat; /* 0x.53c - Interface Status Register */ u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */ @@ -688,9 +684,6 @@ struct gfar_private { struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */ u32 *hash_regs[16]; int hash_width; - struct gfar *phyregs; - struct work_struct tq; - struct timer_list phy_info_timer; struct net_device_stats stats; /* linux network statistics */ struct gfar_extra_stats extra_stats; spinlock_t lock; @@ -710,7 +703,8 @@ struct gfar_private { unsigned int interruptError; struct gianfar_platform_data *einfo; - struct gfar_mii_info *mii_info; + struct phy_device *phydev; + struct mii_bus *mii_bus; int oldspeed; int oldduplex; int oldlink; @@ -732,4 +726,12 @@ extern inline void gfar_write(volatile unsigned *addr, u32 val) extern struct ethtool_ops *gfar_op_array[]; +extern irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs); +extern int startup_gfar(struct net_device *dev); +extern void stop_gfar(struct net_device *dev); +extern void gfar_halt(struct net_device *dev); +extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, + int enable, u32 regnum, u32 read); +void gfar_setup_stashing(struct net_device *dev); + #endif /* __GIANFAR_H */ diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index a451de629197..68e3578e7613 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -39,17 +39,18 @@ #include #include #include +#include +#include #include "gianfar.h" #define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) -extern int startup_gfar(struct net_device *dev); -extern void stop_gfar(struct net_device *dev); -extern void gfar_halt(struct net_device *dev); extern void gfar_start(struct net_device *dev); extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); +#define GFAR_MAX_COAL_USECS 0xffff +#define GFAR_MAX_COAL_FRAMES 0xff static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf); static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf); @@ -182,38 +183,32 @@ static void gfar_gdrvinfo(struct net_device *dev, struct drvinfo->eedump_len = 0; } + +static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct gfar_private *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + + if (NULL == phydev) + return -ENODEV; + + return phy_ethtool_sset(phydev, cmd); +} + + /* Return the current settings in the ethtool_cmd structure */ static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) { struct gfar_private *priv = netdev_priv(dev); - uint gigabit_support = - priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? - SUPPORTED_1000baseT_Full : 0; - uint gigabit_advert = - priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? - ADVERTISED_1000baseT_Full: 0; - - cmd->supported = (SUPPORTED_10baseT_Half - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | gigabit_support | SUPPORTED_Autoneg); - - /* For now, we always advertise everything */ - cmd->advertising = (ADVERTISED_10baseT_Half - | ADVERTISED_100baseT_Half - | ADVERTISED_100baseT_Full - | gigabit_advert | ADVERTISED_Autoneg); - - cmd->speed = priv->mii_info->speed; - cmd->duplex = priv->mii_info->duplex; - cmd->port = PORT_MII; - cmd->phy_address = priv->mii_info->mii_id; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = AUTONEG_ENABLE; + struct phy_device *phydev = priv->phydev; + + if (NULL == phydev) + return -ENODEV; + cmd->maxtxpkt = priv->txcount; cmd->maxrxpkt = priv->rxcount; - return 0; + return phy_ethtool_gset(phydev, cmd); } /* Return the length of the register structure */ @@ -241,14 +236,14 @@ static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int use unsigned int count; /* The timer is different, depending on the interface speed */ - switch (priv->mii_info->speed) { - case 1000: + switch (priv->phydev->speed) { + case SPEED_1000: count = GFAR_GBIT_TIME; break; - case 100: + case SPEED_100: count = GFAR_100_TIME; break; - case 10: + case SPEED_10: default: count = GFAR_10_TIME; break; @@ -265,14 +260,14 @@ static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int tic unsigned int count; /* The timer is different, depending on the interface speed */ - switch (priv->mii_info->speed) { - case 1000: + switch (priv->phydev->speed) { + case SPEED_1000: count = GFAR_GBIT_TIME; break; - case 100: + case SPEED_100: count = GFAR_100_TIME; break; - case 10: + case SPEED_10: default: count = GFAR_10_TIME; break; @@ -292,6 +287,9 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) return -EOPNOTSUPP; + if (NULL == priv->phydev) + return -ENODEV; + cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime); cvals->rx_max_coalesced_frames = priv->rxcount; @@ -348,6 +346,22 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals else priv->rxcoalescing = 1; + if (NULL == priv->phydev) + return -ENODEV; + + /* Check the bounds of the values */ + if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) { + pr_info("Coalescing is limited to %d microseconds\n", + GFAR_MAX_COAL_USECS); + return -EINVAL; + } + + if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) { + pr_info("Coalescing is limited to %d frames\n", + GFAR_MAX_COAL_FRAMES); + return -EINVAL; + } + priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs); priv->rxcount = cvals->rx_max_coalesced_frames; @@ -358,6 +372,19 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals else priv->txcoalescing = 1; + /* Check the bounds of the values */ + if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) { + pr_info("Coalescing is limited to %d microseconds\n", + GFAR_MAX_COAL_USECS); + return -EINVAL; + } + + if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) { + pr_info("Coalescing is limited to %d frames\n", + GFAR_MAX_COAL_FRAMES); + return -EINVAL; + } + priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs); priv->txcount = cvals->tx_max_coalesced_frames; @@ -536,6 +563,7 @@ static void gfar_set_msglevel(struct net_device *dev, uint32_t data) struct ethtool_ops gfar_ethtool_ops = { .get_settings = gfar_gsettings, + .set_settings = gfar_ssettings, .get_drvinfo = gfar_gdrvinfo, .get_regs_len = gfar_reglen, .get_regs = gfar_get_regs, diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c new file mode 100644 index 000000000000..1eca1dbca7f1 --- /dev/null +++ b/drivers/net/gianfar_mii.c @@ -0,0 +1,219 @@ +/* + * drivers/net/gianfar_mii.c + * + * Gianfar Ethernet Driver -- MIIM bus implementation + * Provides Bus interface for MIIM regs + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "gianfar.h" +#include "gianfar_mii.h" + +/* Write value to the PHY at mii_id at register regnum, + * on the bus, waiting until the write is done before returning. + * All PHY configuration is done through the TSEC1 MIIM regs */ +int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) +{ + struct gfar_mii *regs = bus->priv; + + /* Set the PHY address and the register address we want to write */ + gfar_write(®s->miimadd, (mii_id << 8) | regnum); + + /* Write out the value we want */ + gfar_write(®s->miimcon, value); + + /* Wait for the transaction to finish */ + while (gfar_read(®s->miimind) & MIIMIND_BUSY) + cpu_relax(); + + return 0; +} + +/* Read the bus for PHY at addr mii_id, register regnum, and + * return the value. Clears miimcom first. All PHY + * configuration has to be done through the TSEC1 MIIM regs */ +int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct gfar_mii *regs = bus->priv; + u16 value; + + /* Set the PHY address and the register address we want to read */ + gfar_write(®s->miimadd, (mii_id << 8) | regnum); + + /* Clear miimcom, and then initiate a read */ + gfar_write(®s->miimcom, 0); + gfar_write(®s->miimcom, MII_READ_COMMAND); + + /* Wait for the transaction to finish */ + while (gfar_read(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) + cpu_relax(); + + /* Grab the value of the register from miimstat */ + value = gfar_read(®s->miimstat); + + return value; +} + + +/* Reset the MIIM registers, and wait for the bus to free */ +int gfar_mdio_reset(struct mii_bus *bus) +{ + struct gfar_mii *regs = bus->priv; + unsigned int timeout = PHY_INIT_TIMEOUT; + + spin_lock_bh(&bus->mdio_lock); + + /* Reset the management interface */ + gfar_write(®s->miimcfg, MIIMCFG_RESET); + + /* Setup the MII Mgmt clock speed */ + gfar_write(®s->miimcfg, MIIMCFG_INIT_VALUE); + + /* Wait until the bus is free */ + while ((gfar_read(®s->miimind) & MIIMIND_BUSY) && + timeout--) + cpu_relax(); + + spin_unlock_bh(&bus->mdio_lock); + + if(timeout <= 0) { + printk(KERN_ERR "%s: The MII Bus is stuck!\n", + bus->name); + return -EBUSY; + } + + return 0; +} + + +int gfar_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gianfar_mdio_data *pdata; + struct gfar_mii *regs; + struct mii_bus *new_bus; + int err = 0; + + if (NULL == dev) + return -EINVAL; + + new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + new_bus->name = "Gianfar MII Bus", + new_bus->read = &gfar_mdio_read, + new_bus->write = &gfar_mdio_write, + new_bus->reset = &gfar_mdio_reset, + new_bus->id = pdev->id; + + pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /* Set the PHY base address */ + regs = (struct gfar_mii *) ioremap(pdata->paddr, + sizeof (struct gfar_mii)); + + if (NULL == regs) { + err = -ENOMEM; + goto reg_map_fail; + } + + new_bus->priv = regs; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + iounmap((void *) regs); +reg_map_fail: + kfree(new_bus); + + return err; +} + + +int gfar_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + + iounmap((void *) (&bus->priv)); + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver gianfar_mdio_driver = { + .name = "fsl-gianfar_mdio", + .bus = &platform_bus_type, + .probe = gfar_mdio_probe, + .remove = gfar_mdio_remove, +}; + +int __init gfar_mdio_init(void) +{ + return driver_register(&gianfar_mdio_driver); +} + +void __exit gfar_mdio_exit(void) +{ + driver_unregister(&gianfar_mdio_driver); +} diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h new file mode 100644 index 000000000000..56e5665d5c9b --- /dev/null +++ b/drivers/net/gianfar_mii.h @@ -0,0 +1,45 @@ +/* + * drivers/net/gianfar_mii.h + * + * Gianfar Ethernet Driver -- MII Management Bus Implementation + * Driver for the MDIO bus controller in the Gianfar register space + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __GIANFAR_MII_H +#define __GIANFAR_MII_H + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define MII_READ_COMMAND 0x00000001 + +#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \ + | SUPPORTED_100baseT_Half \ + | SUPPORTED_100baseT_Full \ + | SUPPORTED_Autoneg \ + | SUPPORTED_MII) + +struct gfar_mii { + u32 miimcfg; /* 0x.520 - MII Management Config Register */ + u32 miimcom; /* 0x.524 - MII Management Command Register */ + u32 miimadd; /* 0x.528 - MII Management Address Register */ + u32 miimcon; /* 0x.52c - MII Management Control Register */ + u32 miimstat; /* 0x.530 - MII Management Status Register */ + u32 miimind; /* 0x.534 - MII Management Indicator Register */ +}; + +int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum); +int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); +int __init gfar_mdio_init(void); +void __exit gfar_mdio_exit(void); +#endif /* GIANFAR_PHY_H */ diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c deleted file mode 100644 index 7c965f268a82..000000000000 --- a/drivers/net/gianfar_phy.c +++ /dev/null @@ -1,661 +0,0 @@ -/* - * drivers/net/gianfar_phy.c - * - * Gianfar Ethernet Driver -- PHY handling - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 - * Based on 8260_io/fcc_enet.c - * - * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) - * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "gianfar.h" -#include "gianfar_phy.h" - -static void config_genmii_advert(struct gfar_mii_info *mii_info); -static void genmii_setup_forced(struct gfar_mii_info *mii_info); -static void genmii_restart_aneg(struct gfar_mii_info *mii_info); -static int gbit_config_aneg(struct gfar_mii_info *mii_info); -static int genmii_config_aneg(struct gfar_mii_info *mii_info); -static int genmii_update_link(struct gfar_mii_info *mii_info); -static int genmii_read_status(struct gfar_mii_info *mii_info); -u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum); -void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val); - -/* Write value to the PHY for this device to the register at regnum, */ -/* waiting until the write is done before it returns. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) -{ - struct gfar_private *priv = netdev_priv(dev); - struct gfar *regbase = priv->phyregs; - - /* Set the PHY address and the register address we want to write */ - gfar_write(®base->miimadd, (mii_id << 8) | regnum); - - /* Write out the value we want */ - gfar_write(®base->miimcon, value); - - /* Wait for the transaction to finish */ - while (gfar_read(®base->miimind) & MIIMIND_BUSY) - cpu_relax(); -} - -/* Reads from register regnum in the PHY for device dev, */ -/* returning the value. Clears miimcom first. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg(struct net_device *dev, int mii_id, int regnum) -{ - struct gfar_private *priv = netdev_priv(dev); - struct gfar *regbase = priv->phyregs; - u16 value; - - /* Set the PHY address and the register address we want to read */ - gfar_write(®base->miimadd, (mii_id << 8) | regnum); - - /* Clear miimcom, and then initiate a read */ - gfar_write(®base->miimcom, 0); - gfar_write(®base->miimcom, MII_READ_COMMAND); - - /* Wait for the transaction to finish */ - while (gfar_read(®base->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) - cpu_relax(); - - /* Grab the value of the register from miimstat */ - value = gfar_read(®base->miimstat); - - return value; -} - -void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info) -{ - if(mii_info->phyinfo->ack_interrupt) - mii_info->phyinfo->ack_interrupt(mii_info); -} - - -void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts) -{ - mii_info->interrupts = interrupts; - if(mii_info->phyinfo->config_intr) - mii_info->phyinfo->config_intr(mii_info); -} - - -/* Writes MII_ADVERTISE with the appropriate values, after - * sanitizing advertise to make sure only supported features - * are advertised - */ -static void config_genmii_advert(struct gfar_mii_info *mii_info) -{ - u32 advertise; - u16 adv; - - /* Only allow advertising what this PHY supports */ - mii_info->advertising &= mii_info->phyinfo->features; - advertise = mii_info->advertising; - - /* Setup standard advertisement */ - adv = phy_read(mii_info, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - phy_write(mii_info, MII_ADVERTISE, adv); -} - -static void genmii_setup_forced(struct gfar_mii_info *mii_info) -{ - u16 ctrl; - u32 features = mii_info->phyinfo->features; - - ctrl = phy_read(mii_info, MII_BMCR); - - ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE); - ctrl |= BMCR_RESET; - - switch(mii_info->speed) { - case SPEED_1000: - if(features & (SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full)) { - ctrl |= BMCR_SPEED1000; - break; - } - mii_info->speed = SPEED_100; - case SPEED_100: - if (features & (SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full)) { - ctrl |= BMCR_SPEED100; - break; - } - mii_info->speed = SPEED_10; - case SPEED_10: - if (features & (SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full)) - break; - default: /* Unsupported speed! */ - printk(KERN_ERR "%s: Bad speed!\n", - mii_info->dev->name); - break; - } - - phy_write(mii_info, MII_BMCR, ctrl); -} - - -/* Enable and Restart Autonegotiation */ -static void genmii_restart_aneg(struct gfar_mii_info *mii_info) -{ - u16 ctl; - - ctl = phy_read(mii_info, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(mii_info, MII_BMCR, ctl); -} - - -static int gbit_config_aneg(struct gfar_mii_info *mii_info) -{ - u16 adv; - u32 advertise; - - if(mii_info->autoneg) { - /* Configure the ADVERTISE register */ - config_genmii_advert(mii_info); - advertise = mii_info->advertising; - - adv = phy_read(mii_info, MII_1000BASETCONTROL); - adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | - MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (advertise & SUPPORTED_1000baseT_Half) - adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; - if (advertise & SUPPORTED_1000baseT_Full) - adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; - phy_write(mii_info, MII_1000BASETCONTROL, adv); - - /* Start/Restart aneg */ - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); - - return 0; -} - -static int marvell_config_aneg(struct gfar_mii_info *mii_info) -{ - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation */ - phy_write(mii_info, MII_BMCR, BMCR_RESET); - - phy_write(mii_info, 0x1d, 0x1f); - phy_write(mii_info, 0x1e, 0x200c); - phy_write(mii_info, 0x1d, 0x5); - phy_write(mii_info, 0x1e, 0); - phy_write(mii_info, 0x1e, 0x100); - - gbit_config_aneg(mii_info); - - return 0; -} -static int genmii_config_aneg(struct gfar_mii_info *mii_info) -{ - if (mii_info->autoneg) { - config_genmii_advert(mii_info); - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); - - return 0; -} - - -static int genmii_update_link(struct gfar_mii_info *mii_info) -{ - u16 status; - - /* Do a fake read */ - phy_read(mii_info, MII_BMSR); - - /* Read link and autonegotiation status */ - status = phy_read(mii_info, MII_BMSR); - if ((status & BMSR_LSTATUS) == 0) - mii_info->link = 0; - else - mii_info->link = 1; - - /* If we are autonegotiating, and not done, - * return an error */ - if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) - return -EAGAIN; - - return 0; -} - -static int genmii_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - if (mii_info->autoneg) { - status = phy_read(mii_info, MII_LPA); - - if (status & (LPA_10FULL | LPA_100FULL)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - if (status & (LPA_100FULL | LPA_100HALF)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - mii_info->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ - - return 0; -} -static int marvell_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); - -#if 0 - /* If speed and duplex aren't resolved, - * return an error. Isn't this handled - * by checking aneg? - */ - if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0) - return -EAGAIN; -#endif - - /* Get the duplexity */ - if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - - /* Get the speed */ - speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; - switch(speed) { - case MII_M1011_PHY_SPEC_STATUS_1000: - mii_info->speed = SPEED_1000; - break; - case MII_M1011_PHY_SPEC_STATUS_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - mii_info->pause = 0; - } - - return 0; -} - - -static int cis820x_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - - status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); - if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - - speed = status & MII_CIS8201_AUXCONSTAT_SPEED; - - switch (speed) { - case MII_CIS8201_AUXCONSTAT_GBIT: - mii_info->speed = SPEED_1000; - break; - case MII_CIS8201_AUXCONSTAT_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - } - - return 0; -} - -static int marvell_ack_interrupt(struct gfar_mii_info *mii_info) -{ - /* Clear the interrupts by reading the reg */ - phy_read(mii_info, MII_M1011_IEVENT); - - return 0; -} - -static int marvell_config_intr(struct gfar_mii_info *mii_info) -{ - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); - else - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); - - return 0; -} - -static int cis820x_init(struct gfar_mii_info *mii_info) -{ - phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, - MII_CIS8201_AUXCONSTAT_INIT); - phy_write(mii_info, MII_CIS8201_EXT_CON1, - MII_CIS8201_EXTCON1_INIT); - - return 0; -} - -static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info) -{ - phy_read(mii_info, MII_CIS8201_ISTAT); - - return 0; -} - -static int cis820x_config_intr(struct gfar_mii_info *mii_info) -{ - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); - else - phy_write(mii_info, MII_CIS8201_IMASK, 0); - - return 0; -} - -#define DM9161_DELAY 10 - -static int dm9161_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - status = phy_read(mii_info, MII_DM9161_SCSR); - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - } - - return 0; -} - - -static int dm9161_config_aneg(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv = mii_info->priv; - - if(0 == priv->resetdone) - return -EAGAIN; - - return 0; -} - -static void dm9161_timer(unsigned long data) -{ - struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data; - struct dm9161_private *priv = mii_info->priv; - u16 status = phy_read(mii_info, MII_BMSR); - - if (status & BMSR_ANEGCOMPLETE) { - priv->resetdone = 1; - } else - mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); -} - -static int dm9161_init(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv; - - /* Allocate the private data structure */ - priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); - - if (NULL == priv) - return -ENOMEM; - - mii_info->priv = priv; - - /* Reset is not done yet */ - priv->resetdone = 0; - - /* Isolate the PHY */ - phy_write(mii_info, MII_BMCR, BMCR_ISOLATE); - - /* Do not bypass the scrambler/descrambler */ - phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); - - /* Clear 10BTCSR to default */ - phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); - - /* Reconnect the PHY, and enable Autonegotiation */ - phy_write(mii_info, MII_BMCR, BMCR_ANENABLE); - - /* Start a timer for DM9161_DELAY seconds to wait - * for the PHY to be ready */ - init_timer(&priv->timer); - priv->timer.function = &dm9161_timer; - priv->timer.data = (unsigned long) mii_info; - mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); - - return 0; -} - -static void dm9161_close(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv = mii_info->priv; - - del_timer_sync(&priv->timer); - kfree(priv); -} - -#if 0 -static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info) -{ - phy_read(mii_info, MII_DM9161_INTR); - - return 0; -} -#endif - -/* Cicada 820x */ -static struct phy_info phy_info_cis820x = { - 0x000fc440, - "Cicada Cis8204", - 0x000fffc0, - .features = MII_GBIT_FEATURES, - .init = &cis820x_init, - .config_aneg = &gbit_config_aneg, - .read_status = &cis820x_read_status, - .ack_interrupt = &cis820x_ack_interrupt, - .config_intr = &cis820x_config_intr, -}; - -static struct phy_info phy_info_dm9161 = { - .phy_id = 0x0181b880, - .name = "Davicom DM9161E", - .phy_id_mask = 0x0ffffff0, - .init = dm9161_init, - .config_aneg = dm9161_config_aneg, - .read_status = dm9161_read_status, - .close = dm9161_close, -}; - -static struct phy_info phy_info_marvell = { - .phy_id = 0x01410c00, - .phy_id_mask = 0xffffff00, - .name = "Marvell 88E1101/88E1111", - .features = MII_GBIT_FEATURES, - .config_aneg = &marvell_config_aneg, - .read_status = &marvell_read_status, - .ack_interrupt = &marvell_ack_interrupt, - .config_intr = &marvell_config_intr, -}; - -static struct phy_info phy_info_genmii= { - .phy_id = 0x00000000, - .phy_id_mask = 0x00000000, - .name = "Generic MII", - .features = MII_BASIC_FEATURES, - .config_aneg = genmii_config_aneg, - .read_status = genmii_read_status, -}; - -static struct phy_info *phy_info[] = { - &phy_info_cis820x, - &phy_info_marvell, - &phy_info_dm9161, - &phy_info_genmii, - NULL -}; - -u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum) -{ - u16 retval; - unsigned long flags; - - spin_lock_irqsave(&mii_info->mdio_lock, flags); - retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); - spin_unlock_irqrestore(&mii_info->mdio_lock, flags); - - return retval; -} - -void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val) -{ - unsigned long flags; - - spin_lock_irqsave(&mii_info->mdio_lock, flags); - mii_info->mdio_write(mii_info->dev, - mii_info->mii_id, - regnum, val); - spin_unlock_irqrestore(&mii_info->mdio_lock, flags); -} - -/* Use the PHY ID registers to determine what type of PHY is attached - * to device dev. return a struct phy_info structure describing that PHY - */ -struct phy_info * get_phy_info(struct gfar_mii_info *mii_info) -{ - u16 phy_reg; - u32 phy_ID; - int i; - struct phy_info *theInfo = NULL; - struct net_device *dev = mii_info->dev; - - /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read(mii_info, MII_PHYSID1); - phy_ID = (phy_reg & 0xffff) << 16; - - /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read(mii_info, MII_PHYSID2); - phy_ID |= (phy_reg & 0xffff); - - /* loop through all the known PHY types, and find one that */ - /* matches the ID we read from the PHY. */ - for (i = 0; phy_info[i]; i++) - if (phy_info[i]->phy_id == - (phy_ID & phy_info[i]->phy_id_mask)) { - theInfo = phy_info[i]; - break; - } - - /* This shouldn't happen, as we have generic PHY support */ - if (theInfo == NULL) { - printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID); - return NULL; - } else { - printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name, - phy_ID); - } - - return theInfo; -} diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h deleted file mode 100644 index 1e9b3abf1e6d..000000000000 --- a/drivers/net/gianfar_phy.h +++ /dev/null @@ -1,213 +0,0 @@ -/* - * drivers/net/gianfar_phy.h - * - * Gianfar Ethernet Driver -- PHY handling - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 - * Based on 8260_io/fcc_enet.c - * - * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) - * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __GIANFAR_PHY_H -#define __GIANFAR_PHY_H - -#define MII_end ((u32)-2) -#define MII_read ((u32)-1) - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define GFAR_AN_TIMEOUT 2000 - -/* 1000BT control (Marvell & BCM54xx at least) */ -#define MII_1000BASETCONTROL 0x09 -#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 -#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 - -/* Cicada Extended Control Register 1 */ -#define MII_CIS8201_EXT_CON1 0x17 -#define MII_CIS8201_EXTCON1_INIT 0x0000 - -/* Cicada Interrupt Mask Register */ -#define MII_CIS8201_IMASK 0x19 -#define MII_CIS8201_IMASK_IEN 0x8000 -#define MII_CIS8201_IMASK_SPEED 0x4000 -#define MII_CIS8201_IMASK_LINK 0x2000 -#define MII_CIS8201_IMASK_DUPLEX 0x1000 -#define MII_CIS8201_IMASK_MASK 0xf000 - -/* Cicada Interrupt Status Register */ -#define MII_CIS8201_ISTAT 0x1a -#define MII_CIS8201_ISTAT_STATUS 0x8000 -#define MII_CIS8201_ISTAT_SPEED 0x4000 -#define MII_CIS8201_ISTAT_LINK 0x2000 -#define MII_CIS8201_ISTAT_DUPLEX 0x1000 - -/* Cicada Auxiliary Control/Status Register */ -#define MII_CIS8201_AUX_CONSTAT 0x1c -#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 -#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 -#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 -#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 -#define MII_CIS8201_AUXCONSTAT_100 0x0008 - -/* 88E1011 PHY Status Register */ -#define MII_M1011_PHY_SPEC_STATUS 0x11 -#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 -#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 -#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 -#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 -#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 -#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 - -#define MII_M1011_IEVENT 0x13 -#define MII_M1011_IEVENT_CLEAR 0x0000 - -#define MII_M1011_IMASK 0x12 -#define MII_M1011_IMASK_INIT 0x6400 -#define MII_M1011_IMASK_CLEAR 0x0000 - -#define MII_DM9161_SCR 0x10 -#define MII_DM9161_SCR_INIT 0x0610 - -/* DM9161 Specified Configuration and Status Register */ -#define MII_DM9161_SCSR 0x11 -#define MII_DM9161_SCSR_100F 0x8000 -#define MII_DM9161_SCSR_100H 0x4000 -#define MII_DM9161_SCSR_10F 0x2000 -#define MII_DM9161_SCSR_10H 0x1000 - -/* DM9161 Interrupt Register */ -#define MII_DM9161_INTR 0x15 -#define MII_DM9161_INTR_PEND 0x8000 -#define MII_DM9161_INTR_DPLX_MASK 0x0800 -#define MII_DM9161_INTR_SPD_MASK 0x0400 -#define MII_DM9161_INTR_LINK_MASK 0x0200 -#define MII_DM9161_INTR_MASK 0x0100 -#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 -#define MII_DM9161_INTR_SPD_CHANGE 0x0008 -#define MII_DM9161_INTR_LINK_CHANGE 0x0004 -#define MII_DM9161_INTR_INIT 0x0000 -#define MII_DM9161_INTR_STOP \ -(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ - | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) - -/* DM9161 10BT Configuration/Status */ -#define MII_DM9161_10BTCSR 0x12 -#define MII_DM9161_10BTCSR_INIT 0x7800 - -#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ - SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | \ - SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | \ - SUPPORTED_TP | \ - SUPPORTED_MII) - -#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | \ - SUPPORTED_1000baseT_Full) - -#define MII_READ_COMMAND 0x00000001 - -#define MII_INTERRUPT_DISABLED 0x0 -#define MII_INTERRUPT_ENABLED 0x1 -/* Taken from mii_if_info and sungem_phy.h */ -struct gfar_mii_info { - /* Information about the PHY type */ - /* And management functions */ - struct phy_info *phyinfo; - - /* forced speed & duplex (no autoneg) - * partner speed & duplex & pause (autoneg) - */ - int speed; - int duplex; - int pause; - - /* The most recently read link state */ - int link; - - /* Enabled Interrupts */ - u32 interrupts; - - u32 advertising; - int autoneg; - int mii_id; - - /* private data pointer */ - /* For use by PHYs to maintain extra state */ - void *priv; - - /* Provided by host chip */ - struct net_device *dev; - - /* A lock to ensure that only one thing can read/write - * the MDIO bus at a time */ - spinlock_t mdio_lock; - - /* Provided by ethernet driver */ - int (*mdio_read) (struct net_device *dev, int mii_id, int reg); - void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val); -}; - -/* struct phy_info: a structure which defines attributes for a PHY - * - * id will contain a number which represents the PHY. During - * startup, the driver will poll the PHY to find out what its - * UID--as defined by registers 2 and 3--is. The 32-bit result - * gotten from the PHY will be ANDed with phy_id_mask to - * discard any bits which may change based on revision numbers - * unimportant to functionality - * - * There are 6 commands which take a gfar_mii_info structure. - * Each PHY must declare config_aneg, and read_status. - */ -struct phy_info { - u32 phy_id; - char *name; - unsigned int phy_id_mask; - u32 features; - - /* Called to initialize the PHY */ - int (*init)(struct gfar_mii_info *mii_info); - - /* Called to suspend the PHY for power */ - int (*suspend)(struct gfar_mii_info *mii_info); - - /* Reconfigures autonegotiation (or disables it) */ - int (*config_aneg)(struct gfar_mii_info *mii_info); - - /* Determines the negotiated speed and duplex */ - int (*read_status)(struct gfar_mii_info *mii_info); - - /* Clears any pending interrupts */ - int (*ack_interrupt)(struct gfar_mii_info *mii_info); - - /* Enables or disables interrupts */ - int (*config_intr)(struct gfar_mii_info *mii_info); - - /* Clears up any memory if needed */ - void (*close)(struct gfar_mii_info *mii_info); -}; - -struct phy_info *get_phy_info(struct gfar_mii_info *mii_info); -int read_phy_reg(struct net_device *dev, int mii_id, int regnum); -void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value); -void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info); -void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts); - -struct dm9161_private { - struct timer_list timer; - int resetdone; -}; - -#endif /* GIANFAR_PHY_H */ -- cgit v1.2.3 From 8cee0cd5bec53b78dd3c43a73b27821a688133e6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 23 Sep 2005 22:58:49 -0400 Subject: [netdrvr] delete CONFIG_PHYCONTROL --- drivers/net/Kconfig | 1 - drivers/net/phy/Kconfig | 8 -------- drivers/net/phy/phy.c | 8 -------- drivers/net/phy/phy_device.c | 3 --- 4 files changed, 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4739a63601eb..db8898100325 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2076,7 +2076,6 @@ config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx select PHYLIB - select PHYCONTROL help This driver supports the Gigabit TSEC on the MPC85xx family of chips, and the FEC on the 8540 diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 14f4de1a8180..c782a6329805 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -12,14 +12,6 @@ config PHYLIB devices. This option provides infrastructure for managing PHY devices. -config PHYCONTROL - bool " Support for automatically handling PHY state changes" - depends on PHYLIB - help - Adds code to perform all the work for keeping PHY link - state (speed/duplex/etc) up-to-date. Also handles - interrupts. - comment "MII PHY device drivers" depends on PHYLIB diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d9e11f93bf3a..9209da9dde0d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -242,10 +242,6 @@ EXPORT_SYMBOL(phy_sanitize_settings); * choose the next best ones from the ones selected, so we don't * care if ethtool tries to give us bad values * - * A note about the PHYCONTROL Layer. If you turn off - * CONFIG_PHYCONTROL, you will need to read the PHY status - * registers after this function completes, and update your - * controller manually. */ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) { @@ -380,7 +376,6 @@ int phy_start_aneg(struct phy_device *phydev) err = phydev->drv->config_aneg(phydev); -#ifdef CONFIG_PHYCONTROL if (err < 0) goto out_unlock; @@ -395,14 +390,12 @@ int phy_start_aneg(struct phy_device *phydev) } out_unlock: -#endif spin_unlock(&phydev->lock); return err; } EXPORT_SYMBOL(phy_start_aneg); -#ifdef CONFIG_PHYCONTROL static void phy_change(void *data); static void phy_timer(unsigned long data); @@ -868,4 +861,3 @@ static void phy_timer(unsigned long data) mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); } -#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 33f7bdb5857c..6da1aa0706a1 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -101,7 +101,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) return dev; } -#ifdef CONFIG_PHYCONTROL /* phy_prepare_link: * * description: Tells the PHY infrastructure to handle the @@ -160,8 +159,6 @@ void phy_disconnect(struct phy_device *phydev) } EXPORT_SYMBOL(phy_disconnect); -#endif /* CONFIG_PHYCONTROL */ - /* phy_attach: * * description: Called by drivers to attach to a particular PHY -- cgit v1.2.3 From 7a716536c602be6050b4f3ece30f1fc3b64362b0 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 21:58:58 -0700 Subject: [PATCH] hostap: Fix pci_driver name for hostap_plx and hostap_pci hostap_pci and hostap_plx drivers still use PCI driver names "prism2_pci" and "prism2_plx" respectively. This is unfriendly to linux-wlan-ng, which uses the same names. So, if e.g. hostap_pci and prism2_pci are loaded, they will "share" /sys/bus/pci/drivers/prism2_plx directory. Change PCI driver names of hostap_pci and hostap_plx to be equal to their module names. Signed-off-by: Pavel Roskin Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_pci.c | 2 +- drivers/net/wireless/hostap/hostap_plx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 025f8cdb5566..b9254f73fbaf 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -441,7 +441,7 @@ static int prism2_pci_resume(struct pci_dev *pdev) MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); static struct pci_driver prism2_pci_drv_id = { - .name = "prism2_pci", + .name = "hostap_pci", .id_table = prism2_pci_id_table, .probe = prism2_pci_probe, .remove = prism2_pci_remove, diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 474ef83d813e..1abebdf48b20 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -616,7 +616,7 @@ static void prism2_plx_remove(struct pci_dev *pdev) MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); static struct pci_driver prism2_plx_drv_id = { - .name = "prism2_plx", + .name = "hostap_plx", .id_table = prism2_plx_id_table, .probe = prism2_plx_probe, .remove = prism2_plx_remove, -- cgit v1.2.3 From c28df16ed70d1b6cefd12135e3c68bfccd1bb635 Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Fri, 23 Sep 2005 21:58:59 -0700 Subject: [PATCH] hostap: Add support for WE-19 This patch adds support for WE-19 to the HostAP driver. One of the major change is the use of an explicit flag to tell if iwstat is in dBm or not. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_80211_rx.c | 3 ++- drivers/net/wireless/hostap/hostap_ap.c | 6 +++--- drivers/net/wireless/hostap/hostap_ioctl.c | 9 +++++++-- 3 files changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 42e61c68c325..ffac50899454 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -737,7 +737,8 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, struct iw_quality wstats; wstats.level = rx_stats->signal; wstats.noise = rx_stats->noise; - wstats.updated = 6; /* No qual value */ + wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_UPDATED + | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; /* Update spy records */ wireless_spy_update(dev, hdr->addr2, &wstats); } diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 087d9269af34..9da94ab7f05f 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -2349,7 +2349,7 @@ static int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); qual[count].updated = sta->last_rx_updated; - sta->last_rx_updated = 0; + sta->last_rx_updated = IW_QUAL_DBM; count++; if (count >= buf_size) @@ -2467,7 +2467,7 @@ static int prism2_ap_translate_scan(struct net_device *dev, char *buffer) } #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - sta->last_rx_updated = 0; + sta->last_rx_updated = IW_QUAL_DBM; /* To be continued, we should make good use of IWEVCUSTOM */ } @@ -3174,7 +3174,7 @@ int hostap_update_rx_stats(struct ap_data *ap, sta->last_rx_silence = rx_stats->noise; sta->last_rx_signal = rx_stats->signal; sta->last_rx_rate = rx_stats->rate; - sta->last_rx_updated = 7; + sta->last_rx_updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; if (rx_stats->rate == 10) sta->rx_count[0]++; else if (rx_stats->rate == 20) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index e720369a3515..dd9817261a3a 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -50,7 +50,8 @@ static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) #endif /* in_atomic */ if (update && prism2_update_comms_qual(dev) == 0) - wstats->qual.updated = 7; + wstats->qual.updated = IW_QUAL_ALL_UPDATED | + IW_QUAL_DBM; wstats->qual.qual = local->comms_qual; wstats->qual.level = local->avg_signal; @@ -59,7 +60,7 @@ static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) wstats->qual.qual = 0; wstats->qual.level = 0; wstats->qual.noise = 0; - wstats->qual.updated = 0; + wstats->qual.updated = IW_QUAL_ALL_INVALID; } return wstats; @@ -1894,6 +1895,10 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); } + iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED + | IW_QUAL_QUAL_INVALID + | IW_QUAL_DBM; iwe.len = IW_EV_QUAL_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); -- cgit v1.2.3 From a9d12b9a4afcfa2cb6f6e76beb4f185a9177c98e Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Fri, 23 Sep 2005 21:59:00 -0700 Subject: [PATCH] hostap: Use GFP_ATOMIC to get rid of weird might_sleep issue This is the trace I got : Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index dd9817261a3a..1764563612a8 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1935,7 +1935,7 @@ static char * __prism2_translate_scan(local_info_t *local, } /* TODO: add BeaconInt,resp_rate,atim into BSS table */ - buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_KERNEL); + buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC); if (buf && scan) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; -- cgit v1.2.3 From 596ff2e7c8db39c700e277f0bc267244be253f5b Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Fri, 23 Sep 2005 21:59:01 -0700 Subject: [PATCH] hostap: Remove iwe_stream_add_event kludge Now that we are compiling with -fno-strict-aliasing (this is the kernel default), we can drop the following kludge for iwe_stream_add_event(). Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_ioctl.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 1764563612a8..53f5246c40aa 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1828,13 +1828,6 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); - /* FIX: - * I do not know how this is possible, but iwe_stream_add_event - * seems to re-order memcpy execution so that len is set only - * after copying.. Pre-setting len here "fixes" this, but real - * problems should be solved (after which these iwe.len - * settings could be removed from this function). */ - iwe.len = IW_EV_ADDR_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); @@ -1844,7 +1837,6 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWESSID; iwe.u.data.length = ssid_len; iwe.u.data.flags = 1; - iwe.len = IW_EV_POINT_LEN + iwe.u.data.length; current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid); memset(&iwe, 0, sizeof(iwe)); @@ -1860,7 +1852,6 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - iwe.len = IW_EV_UINT_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); } @@ -1878,7 +1869,6 @@ static char * __prism2_translate_scan(local_info_t *local, if (chan > 0) { iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000; iwe.u.freq.e = 1; - iwe.len = IW_EV_FREQ_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } @@ -1899,7 +1889,6 @@ static char * __prism2_translate_scan(local_info_t *local, | IW_QUAL_NOISE_UPDATED | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; - iwe.len = IW_EV_QUAL_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); } @@ -1911,7 +1900,6 @@ static char * __prism2_translate_scan(local_info_t *local, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - iwe.len = IW_EV_POINT_LEN + iwe.u.data.length; current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); /* TODO: add SuppRates into BSS table */ -- cgit v1.2.3 From e2e965072564e7aad8df963107677a6d22c41767 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 24 Sep 2005 04:05:52 -0400 Subject: Remove WIRELESS_EXT ifdefs from several wireless drivers. --- drivers/net/wireless/airo.c | 17 --- drivers/net/wireless/netwave_cs.c | 185 ------------------------------ drivers/net/wireless/prism54/isl_ioctl.c | 10 +- drivers/net/wireless/prism54/islpci_dev.c | 4 - drivers/net/wireless/prism54/islpci_dev.h | 2 - drivers/net/wireless/wavelan.c | 8 -- drivers/net/wireless/wavelan.p.h | 4 - drivers/net/wireless/wavelan_cs.c | 8 -- drivers/net/wireless/wavelan_cs.p.h | 4 - 9 files changed, 1 insertion(+), 241 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 06998c2240d9..a6194955df2c 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1046,7 +1046,6 @@ static WifiCtlHdr wifictlhdr8023 = { } }; -#ifdef WIRELESS_EXT // Frequency list (map channels to frequencies) static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; @@ -1067,7 +1066,6 @@ typedef struct wep_key_t { /* List of Wireless Handlers (new API) */ static const struct iw_handler_def airo_handler_def; -#endif /* WIRELESS_EXT */ static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)"; @@ -1110,10 +1108,8 @@ static irqreturn_t airo_interrupt( int irq, void* dev_id, struct pt_regs static int airo_thread(void *data); static void timer_func( struct net_device *dev ); static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -#ifdef WIRELESS_EXT static struct iw_statistics *airo_get_wireless_stats (struct net_device *dev); static void airo_read_wireless_stats (struct airo_info *local); -#endif /* WIRELESS_EXT */ #ifdef CISCO_EXT static int readrids(struct net_device *dev, aironet_ioctl *comp); static int writerids(struct net_device *dev, aironet_ioctl *comp); @@ -1187,12 +1183,10 @@ struct airo_info { int fid; } xmit, xmit11; struct net_device *wifidev; -#ifdef WIRELESS_EXT struct iw_statistics wstats; // wireless stats unsigned long scan_timestamp; /* Time started to scan */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; -#endif /* WIRELESS_EXT */ #ifdef MICSUPPORT /* MIC stuff */ struct crypto_tfm *tfm; @@ -2647,9 +2641,7 @@ static void wifi_setup(struct net_device *dev) dev->get_stats = &airo_get_stats; dev->set_mac_address = &airo_set_mac_address; dev->do_ioctl = &airo_ioctl; -#ifdef WIRELESS_EXT dev->wireless_handlers = &airo_handler_def; -#endif /* WIRELESS_EXT */ dev->change_mtu = &airo_change_mtu; dev->open = &airo_open; dev->stop = &airo_close; @@ -2675,9 +2667,7 @@ static struct net_device *init_wifidev(struct airo_info *ai, dev->priv = ethdev->priv; dev->irq = ethdev->irq; dev->base_addr = ethdev->base_addr; -#ifdef WIRELESS_EXT dev->wireless_data = ethdev->wireless_data; -#endif /* WIRELESS_EXT */ memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len); err = register_netdev(dev); if (err<0) { @@ -2755,11 +2745,9 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, dev->set_multicast_list = &airo_set_multicast_list; dev->set_mac_address = &airo_set_mac_address; dev->do_ioctl = &airo_ioctl; -#ifdef WIRELESS_EXT dev->wireless_handlers = &airo_handler_def; ai->wireless_data.spy_data = &ai->spy_data; dev->wireless_data = &ai->wireless_data; -#endif /* WIRELESS_EXT */ dev->change_mtu = &airo_change_mtu; dev->open = &airo_open; dev->stop = &airo_close; @@ -5598,7 +5586,6 @@ static void __exit airo_cleanup_module( void ) remove_proc_entry("aironet", proc_root_driver); } -#ifdef WIRELESS_EXT /* * Initial Wireless Extension code for Aironet driver by : * Jean Tourrilhes - HPL - 17 November 00 @@ -7107,8 +7094,6 @@ static const struct iw_handler_def airo_handler_def = .get_wireless_stats = airo_get_wireless_stats, }; -#endif /* WIRELESS_EXT */ - /* * This defines the configuration part of the Wireless Extensions * Note : irq and spinlock protection will occur in the subroutines @@ -7187,7 +7172,6 @@ static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return rc; } -#ifdef WIRELESS_EXT /* * Get the Wireless stats out of the driver * Note : irq and spinlock protection will occur in the subroutines @@ -7260,7 +7244,6 @@ static struct iw_statistics *airo_get_wireless_stats(struct net_device *dev) return &local->wstats; } -#endif /* WIRELESS_EXT */ #ifdef CISCO_EXT /* diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index ca6c03c89926..92793b958e32 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -57,9 +57,7 @@ #include #ifdef CONFIG_NET_RADIO #include -#if WIRELESS_EXT > 12 #include -#endif /* WIRELESS_EXT > 12 */ #endif #include @@ -225,10 +223,7 @@ static void update_stats(struct net_device *dev); static struct net_device_stats *netwave_get_stats(struct net_device *dev); /* Wireless extensions */ -#ifdef WIRELESS_EXT static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev); -#endif -static int netwave_ioctl(struct net_device *, struct ifreq *, int); static void set_multicast_list(struct net_device *dev); @@ -260,26 +255,7 @@ static dev_link_t *dev_list; because they generally can't be allocated dynamically. */ -#if WIRELESS_EXT <= 12 -/* Wireless extensions backward compatibility */ - -/* Part of iw_handler prototype we need */ -struct iw_request_info -{ - __u16 cmd; /* Wireless Extension command */ - __u16 flags; /* More to come ;-) */ -}; - -/* Wireless Extension Backward compatibility - Jean II - * If the new wireless device private ioctl range is not defined, - * default to standard device private ioctl range */ -#ifndef SIOCIWFIRSTPRIV -#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE -#endif /* SIOCIWFIRSTPRIV */ - -#else /* WIRELESS_EXT <= 12 */ static const struct iw_handler_def netwave_handler_def; -#endif /* WIRELESS_EXT <= 12 */ #define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */ @@ -319,9 +295,7 @@ typedef struct netwave_private { struct timer_list watchdog; /* To avoid blocking state */ struct site_survey nss; struct net_device_stats stats; -#ifdef WIRELESS_EXT struct iw_statistics iw_stats; /* Wireless stats */ -#endif } netwave_private; #ifdef NETWAVE_STATS @@ -353,7 +327,6 @@ static inline void wait_WOC(unsigned int iobase) while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; } -#ifdef WIRELESS_EXT static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, kio_addr_t iobase) { u_short resultBuffer; @@ -376,9 +349,7 @@ static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, sizeof(struct site_survey)); } } -#endif -#ifdef WIRELESS_EXT /* * Function netwave_get_wireless_stats (dev) * @@ -411,7 +382,6 @@ static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev) return &priv->iw_stats; } -#endif /* * Function netwave_attach (void) @@ -471,13 +441,7 @@ static dev_link_t *netwave_attach(void) dev->get_stats = &netwave_get_stats; dev->set_multicast_list = &set_multicast_list; /* wireless extensions */ -#if WIRELESS_EXT <= 16 - dev->get_wireless_stats = &netwave_get_wireless_stats; -#endif /* WIRELESS_EXT <= 16 */ -#if WIRELESS_EXT > 12 dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def; -#endif /* WIRELESS_EXT > 12 */ - dev->do_ioctl = &netwave_ioctl; dev->tx_timeout = &netwave_watchdog; dev->watchdog_timeo = TX_TIMEOUT; @@ -576,13 +540,8 @@ static int netwave_set_nwid(struct net_device *dev, /* Disable interrupts & save flags */ spin_lock_irqsave(&priv->spinlock, flags); -#if WIRELESS_EXT > 8 if(!wrqu->nwid.disabled) { domain = wrqu->nwid.value; -#else /* WIRELESS_EXT > 8 */ - if(wrqu->nwid.on) { - domain = wrqu->nwid.nwid; -#endif /* WIRELESS_EXT > 8 */ printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff); wait_WOC(iobase); @@ -606,15 +565,9 @@ static int netwave_get_nwid(struct net_device *dev, union iwreq_data *wrqu, char *extra) { -#if WIRELESS_EXT > 8 wrqu->nwid.value = domain; wrqu->nwid.disabled = 0; wrqu->nwid.fixed = 1; -#else /* WIRELESS_EXT > 8 */ - wrqu->nwid.nwid = domain; - wrqu->nwid.on = 1; -#endif /* WIRELESS_EXT > 8 */ - return 0; } @@ -657,17 +610,11 @@ static int netwave_get_scramble(struct net_device *dev, { key[1] = scramble_key & 0xff; key[0] = (scramble_key>>8) & 0xff; -#if WIRELESS_EXT > 8 wrqu->encoding.flags = IW_ENCODE_ENABLED; wrqu->encoding.length = 2; -#else /* WIRELESS_EXT > 8 */ - wrqu->encoding.method = 1; -#endif /* WIRELESS_EXT > 8 */ - return 0; } -#if WIRELESS_EXT > 8 /* * Wireless Handler : get mode */ @@ -683,7 +630,6 @@ static int netwave_get_mode(struct net_device *dev, return 0; } -#endif /* WIRELESS_EXT > 8 */ /* * Wireless Handler : get range info @@ -702,11 +648,9 @@ static int netwave_get_range(struct net_device *dev, /* Set all the info we don't care or don't know about to zero */ memset(range, 0, sizeof(struct iw_range)); -#if WIRELESS_EXT > 10 /* Set the Wireless Extension versions */ range->we_version_compiled = WIRELESS_EXT; range->we_version_source = 9; /* Nothing for us in v10 and v11 */ -#endif /* WIRELESS_EXT > 10 */ /* Set information in the range struct */ range->throughput = 450 * 1000; /* don't argue on this ! */ @@ -720,16 +664,12 @@ static int netwave_get_range(struct net_device *dev, range->max_qual.level = 255; range->max_qual.noise = 0; -#if WIRELESS_EXT > 7 range->num_bitrates = 1; range->bitrate[0] = 1000000; /* 1 Mb/s */ -#endif /* WIRELESS_EXT > 7 */ -#if WIRELESS_EXT > 8 range->encoding_size[0] = 2; /* 16 bits scrambling */ range->num_encoding_sizes = 1; range->max_encoding_tokens = 1; /* Only one key possible */ -#endif /* WIRELESS_EXT > 8 */ return ret; } @@ -775,8 +715,6 @@ static const struct iw_priv_args netwave_private_args[] = { "getsitesurvey" }, }; -#if WIRELESS_EXT > 12 - static const iw_handler netwave_handler[] = { NULL, /* SIOCSIWNAME */ @@ -839,131 +777,8 @@ static const struct iw_handler_def netwave_handler_def = .standard = (iw_handler *) netwave_handler, .private = (iw_handler *) netwave_private_handler, .private_args = (struct iw_priv_args *) netwave_private_args, -#if WIRELESS_EXT > 16 .get_wireless_stats = netwave_get_wireless_stats, -#endif /* WIRELESS_EXT > 16 */ }; -#endif /* WIRELESS_EXT > 12 */ - -/* - * Function netwave_ioctl (dev, rq, cmd) - * - * Perform ioctl : config & info stuff - * This is the stuff that are treated the wireless extensions (iwconfig) - * - */ -static int netwave_ioctl(struct net_device *dev, /* ioctl device */ - struct ifreq *rq, /* Data passed */ - int cmd) /* Ioctl number */ -{ - int ret = 0; -#ifdef WIRELESS_EXT -#if WIRELESS_EXT <= 12 - struct iwreq *wrq = (struct iwreq *) rq; -#endif -#endif - - DEBUG(0, "%s: ->netwave_ioctl(cmd=0x%X)\n", dev->name, cmd); - - /* Look what is the request */ - switch(cmd) { - /* --------------- WIRELESS EXTENSIONS --------------- */ -#ifdef WIRELESS_EXT -#if WIRELESS_EXT <= 12 - case SIOCGIWNAME: - netwave_get_name(dev, NULL, &(wrq->u), NULL); - break; - case SIOCSIWNWID: - ret = netwave_set_nwid(dev, NULL, &(wrq->u), NULL); - break; - case SIOCGIWNWID: - ret = netwave_get_nwid(dev, NULL, &(wrq->u), NULL); - break; -#if WIRELESS_EXT > 8 /* Note : The API did change... */ - case SIOCGIWENCODE: - /* Get scramble key */ - if(wrq->u.encoding.pointer != (caddr_t) 0) - { - char key[2]; - ret = netwave_get_scramble(dev, NULL, &(wrq->u), key); - if(copy_to_user(wrq->u.encoding.pointer, key, 2)) - ret = -EFAULT; - } - break; - case SIOCSIWENCODE: - /* Set scramble key */ - if(wrq->u.encoding.pointer != (caddr_t) 0) - { - char key[2]; - if(copy_from_user(key, wrq->u.encoding.pointer, 2)) - { - ret = -EFAULT; - break; - } - ret = netwave_set_scramble(dev, NULL, &(wrq->u), key); - } - break; - case SIOCGIWMODE: - /* Mode of operation */ - ret = netwave_get_mode(dev, NULL, &(wrq->u), NULL); - break; -#else /* WIRELESS_EXT > 8 */ - case SIOCGIWENCODE: - /* Get scramble key */ - ret = netwave_get_scramble(dev, NULL, &(wrq->u), - (char *) &wrq->u.encoding.code); - break; - case SIOCSIWENCODE: - /* Set scramble key */ - ret = netwave_set_scramble(dev, NULL, &(wrq->u), - (char *) &wrq->u.encoding.code); - break; -#endif /* WIRELESS_EXT > 8 */ - case SIOCGIWRANGE: - /* Basic checking... */ - if(wrq->u.data.pointer != (caddr_t) 0) { - struct iw_range range; - ret = netwave_get_range(dev, NULL, &(wrq->u), (char *) &range); - if (copy_to_user(wrq->u.data.pointer, &range, - sizeof(struct iw_range))) - ret = -EFAULT; - } - break; - case SIOCGIWPRIV: - /* Basic checking... */ - if(wrq->u.data.pointer != (caddr_t) 0) { - /* Set the number of ioctl available */ - wrq->u.data.length = sizeof(netwave_private_args) / sizeof(netwave_private_args[0]); - - /* Copy structure to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, - (u_char *) netwave_private_args, - sizeof(netwave_private_args))) - ret = -EFAULT; - } - break; - case SIOCGIPSNAP: - if(wrq->u.data.pointer != (caddr_t) 0) { - char buffer[sizeof( struct site_survey)]; - ret = netwave_get_snap(dev, NULL, &(wrq->u), buffer); - /* Copy structure to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, - buffer, - sizeof( struct site_survey))) - { - printk(KERN_DEBUG "Bad buffer!\n"); - break; - } - } - break; -#endif /* WIRELESS_EXT <= 12 */ -#endif /* WIRELESS_EXT */ - default: - ret = -EOPNOTSUPP; - } - - return ret; -} /* * Function netwave_pcmcia_config (link) diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 9a8790e3580c..5c1a1adf1ff8 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -462,14 +462,12 @@ prism54_get_range(struct net_device *ndev, struct iw_request_info *info, /* txpower is supported in dBm's */ range->txpower_capa = IW_TXPOW_DBM; -#if WIRELESS_EXT > 16 /* Event capability (kernel + driver) */ range->event_capa[0] = (IW_EVENT_CAPA_K_0 | IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | IW_EVENT_CAPA_MASK(SIOCGIWAP)); range->event_capa[1] = IW_EVENT_CAPA_K_1; range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM); -#endif /* WIRELESS_EXT > 16 */ if (islpci_get_state(priv) < PRV_STATE_INIT) return 0; @@ -693,14 +691,13 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, extra + dwrq->length, &(bsslist->bsslist[i]), noise); -#if WIRELESS_EXT > 16 + /* Check if there is space for one more entry */ if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { /* Ask user space to try again with a bigger buffer */ rvalue = -E2BIG; break; } -#endif /* WIRELESS_EXT > 16 */ } kfree(bsslist); @@ -2727,12 +2724,7 @@ const struct iw_handler_def prism54_handler_def = { .standard = (iw_handler *) prism54_handler, .private = (iw_handler *) prism54_private_handler, .private_args = (struct iw_priv_args *) prism54_private_args, -#if WIRELESS_EXT > 16 .get_wireless_stats = prism54_get_wireless_stats, -#endif /* WIRELESS_EXT > 16 */ -#if WIRELESS_EXT == 16 - .spy_offset = offsetof(islpci_private, spy_data), -#endif /* WIRELESS_EXT == 16 */ }; /* For wpa_supplicant */ diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 10cce514c15d..6c9584a9f284 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -837,13 +837,9 @@ islpci_setup(struct pci_dev *pdev) priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ? priv->monitor_type : ARPHRD_ETHER; -#if WIRELESS_EXT > 16 /* Add pointers to enable iwspy support. */ priv->wireless_data.spy_data = &priv->spy_data; ndev->wireless_data = &priv->wireless_data; -#else /* WIRELESS_EXT > 16 */ - ndev->get_wireless_stats = &prism54_get_wireless_stats; -#endif /* WIRELESS_EXT > 16 */ /* save the start and end address of the PCI memory area */ ndev->mem_start = (unsigned long) priv->device_base; diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h index 32a1019f1b36..efbed4397951 100644 --- a/drivers/net/wireless/prism54/islpci_dev.h +++ b/drivers/net/wireless/prism54/islpci_dev.h @@ -100,9 +100,7 @@ typedef struct { struct iw_spy_data spy_data; /* iwspy support */ -#if WIRELESS_EXT > 16 struct iw_public_data wireless_data; -#endif /* WIRELESS_EXT > 16 */ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c index 7a5e20a17890..b0d8b5b03152 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/net/wireless/wavelan.c @@ -430,7 +430,6 @@ static void fee_read(unsigned long ioaddr, /* I/O port of the card */ } } -#ifdef WIRELESS_EXT /* if the wireless extension exists in the kernel */ /*------------------------------------------------------------------*/ /* @@ -514,7 +513,6 @@ static void fee_write(unsigned long ioaddr, /* I/O port of the card */ fee_wait(ioaddr, 10, 100); #endif /* EEPROM_IS_PROTECTED */ } -#endif /* WIRELESS_EXT */ /************************ I82586 SUBROUTINES *************************/ /* @@ -973,11 +971,9 @@ static void wv_mmc_show(struct net_device * dev) mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m)); mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); -#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */ /* Don't forget to update statistics */ lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; -#endif /* WIRELESS_EXT */ printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n"); #ifdef DEBUG_SHOW_UNUSED @@ -1499,7 +1495,6 @@ static int wavelan_set_mac_address(struct net_device * dev, void *addr) } #endif /* SET_MAC_ADDRESS */ -#ifdef WIRELESS_EXT /* if wireless extensions exist in the kernel */ /*------------------------------------------------------------------*/ /* @@ -2473,7 +2468,6 @@ static iw_stats *wavelan_get_wireless_stats(struct net_device * dev) #endif return &lp->wstats; } -#endif /* WIRELESS_EXT */ /************************* PACKET RECEPTION *************************/ /* @@ -4194,11 +4188,9 @@ static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr) dev->set_mac_address = &wavelan_set_mac_address; #endif /* SET_MAC_ADDRESS */ -#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */ dev->wireless_handlers = &wavelan_handler_def; lp->wireless_data.spy_data = &lp->spy_data; dev->wireless_data = &lp->wireless_data; -#endif dev->mtu = WAVELAN_MTU; diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h index 509ff22a6caa..166e28b9a4f7 100644 --- a/drivers/net/wireless/wavelan.p.h +++ b/drivers/net/wireless/wavelan.p.h @@ -409,11 +409,9 @@ #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */ #undef SET_MAC_ADDRESS /* Experimental */ -#ifdef WIRELESS_EXT /* If wireless extensions exist in the kernel */ /* Warning: this stuff will slow down the driver. */ #define WIRELESS_SPY /* Enable spying addresses. */ #undef HISTOGRAM /* Enable histogram of signal level. */ -#endif /****************************** DEBUG ******************************/ @@ -506,12 +504,10 @@ struct net_local u_short tx_first_free; u_short tx_first_in_use; -#ifdef WIRELESS_EXT iw_stats wstats; /* Wireless-specific statistics */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; -#endif #ifdef HISTOGRAM int his_number; /* number of intervals */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 183c4732ef65..4b3c98f5c564 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -415,7 +415,6 @@ fee_read(u_long base, /* i/o port of the card */ } } -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /*------------------------------------------------------------------*/ /* @@ -500,7 +499,6 @@ fee_write(u_long base, /* i/o port of the card */ fee_wait(base, 10, 100); #endif /* EEPROM_IS_PROTECTED */ } -#endif /* WIRELESS_EXT */ /******************* WaveLAN Roaming routines... ********************/ @@ -1161,10 +1159,8 @@ wv_mmc_show(struct net_device * dev) mmc_read(base, 0, (u_char *)&m, sizeof(m)); mmc_out(base, mmwoff(0, mmw_freeze), 0); -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /* Don't forget to update statistics */ lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; -#endif /* WIRELESS_EXT */ spin_unlock_irqrestore(&lp->spinlock, flags); @@ -1550,7 +1546,6 @@ wavelan_set_mac_address(struct net_device * dev, } #endif /* SET_MAC_ADDRESS */ -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /*------------------------------------------------------------------*/ /* @@ -2793,7 +2788,6 @@ wavelan_get_wireless_stats(struct net_device * dev) #endif return &lp->wstats; } -#endif /* WIRELESS_EXT */ /************************* PACKET RECEPTION *************************/ /* @@ -4679,11 +4673,9 @@ wavelan_attach(void) dev->watchdog_timeo = WATCHDOG_JIFFIES; SET_ETHTOOL_OPS(dev, &ops); -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ dev->wireless_handlers = &wavelan_handler_def; lp->wireless_data.spy_data = &lp->spy_data; dev->wireless_data = &lp->wireless_data; -#endif /* Other specific data */ dev->mtu = WAVELAN_MTU; diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h index 01d882be8790..724a715089c9 100644 --- a/drivers/net/wireless/wavelan_cs.p.h +++ b/drivers/net/wireless/wavelan_cs.p.h @@ -472,11 +472,9 @@ #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ #undef SET_MAC_ADDRESS /* Experimental */ -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /* Warning : these stuff will slow down the driver... */ #define WIRELESS_SPY /* Enable spying addresses */ #undef HISTOGRAM /* Enable histogram of sig level... */ -#endif /****************************** DEBUG ******************************/ @@ -624,12 +622,10 @@ struct net_local int rfp; /* Last DMA machine receive pointer */ int overrunning; /* Receiver overrun flag */ -#ifdef WIRELESS_EXT iw_stats wstats; /* Wireless specific stats */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; -#endif #ifdef HISTOGRAM int his_number; /* Number of intervals */ -- cgit v1.2.3 From 2759c8d536efe3b853867f345627d89fb64c37af Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 24 Sep 2005 04:09:04 -0400 Subject: [wireless airo] remove needed dma_addr_t obfuscation Fixes bus address truncation bug for certain configs. --- drivers/net/wireless/airo.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index a6194955df2c..746456c34df8 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2521,7 +2521,8 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, unsigned long mem_start, mem_len, aux_start, aux_len; int rc = -1; int i; - unsigned char *busaddroff,*vpackoff; + dma_addr_t busaddroff; + unsigned char *vpackoff; unsigned char __iomem *pciaddroff; mem_start = pci_resource_start(pci, 1); @@ -2564,7 +2565,7 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, /* * Setup descriptor RX, TX, CONFIG */ - busaddroff = (unsigned char *)ai->shared_dma; + busaddroff = ai->shared_dma; pciaddroff = ai->pciaux + AUX_OFFSET; vpackoff = ai->shared; @@ -2573,7 +2574,7 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, ai->rxfids[i].pending = 0; ai->rxfids[i].card_ram_off = pciaddroff; ai->rxfids[i].virtual_host_addr = vpackoff; - ai->rxfids[i].rx_desc.host_addr = (dma_addr_t) busaddroff; + ai->rxfids[i].rx_desc.host_addr = busaddroff; ai->rxfids[i].rx_desc.valid = 1; ai->rxfids[i].rx_desc.len = PKTSIZE; ai->rxfids[i].rx_desc.rdy = 0; @@ -2588,7 +2589,7 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, ai->txfids[i].card_ram_off = pciaddroff; ai->txfids[i].virtual_host_addr = vpackoff; ai->txfids[i].tx_desc.valid = 1; - ai->txfids[i].tx_desc.host_addr = (dma_addr_t) busaddroff; + ai->txfids[i].tx_desc.host_addr = busaddroff; memcpy(ai->txfids[i].virtual_host_addr, &wifictlhdr8023, sizeof(wifictlhdr8023)); @@ -2601,8 +2602,8 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, /* Rid descriptor setup */ ai->config_desc.card_ram_off = pciaddroff; ai->config_desc.virtual_host_addr = vpackoff; - ai->config_desc.rid_desc.host_addr = (dma_addr_t) busaddroff; - ai->ridbus = (dma_addr_t)busaddroff; + ai->config_desc.rid_desc.host_addr = busaddroff; + ai->ridbus = busaddroff; ai->config_desc.rid_desc.rid = 0; ai->config_desc.rid_desc.len = RIDSIZE; ai->config_desc.rid_desc.valid = 1; -- cgit v1.2.3 From ee500aabf10323a7e313731b8c0be7c2c6dd27c7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:34:38 +0800 Subject: [PATCH] libata: indent and whitespace change Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/sata_promise.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..cc68f5706acf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3586,7 +3586,7 @@ u8 ata_bmdma_status(struct ata_port *ap) void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; host_stat = readb(mmio + ATA_DMA_STATUS); } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); return host_stat; } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 538ad727bd2e..def7e0d9dacb 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -438,11 +438,11 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, break; default: - ap->stats.idle_irq++; - break; + ap->stats.idle_irq++; + break; } - return handled; + return handled; } static void pdc_irq_clear(struct ata_port *ap) -- cgit v1.2.3 From 14be71f4c5c5ad1e222c5202ee6d234e9c8828b7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:36:35 +0800 Subject: [PATCH] libata: rename host states Changes: s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 78 +++++++++++++++++++++++----------------------- include/linux/libata.h | 20 ++++++------ 2 files changed, 49 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cc68f5706acf..c4fcdc30f18c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2425,20 +2425,20 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) static unsigned long ata_pio_poll(struct ata_port *ap) { u8 status; - unsigned int poll_state = PIO_ST_UNKNOWN; - unsigned int reg_state = PIO_ST_UNKNOWN; - const unsigned int tmout_state = PIO_ST_TMOUT; - - switch (ap->pio_task_state) { - case PIO_ST: - case PIO_ST_POLL: - poll_state = PIO_ST_POLL; - reg_state = PIO_ST; + unsigned int poll_state = HSM_ST_UNKNOWN; + unsigned int reg_state = HSM_ST_UNKNOWN; + const unsigned int tmout_state = HSM_ST_TMOUT; + + switch (ap->hsm_task_state) { + case HSM_ST: + case HSM_ST_POLL: + poll_state = HSM_ST_POLL; + reg_state = HSM_ST; break; - case PIO_ST_LAST: - case PIO_ST_LAST_POLL: - poll_state = PIO_ST_LAST_POLL; - reg_state = PIO_ST_LAST; + case HSM_ST_LAST: + case HSM_ST_LAST_POLL: + poll_state = HSM_ST_LAST_POLL; + reg_state = HSM_ST_LAST; break; default: BUG(); @@ -2448,14 +2448,14 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - ap->pio_task_state = tmout_state; + ap->hsm_task_state = tmout_state; return 0; } - ap->pio_task_state = poll_state; + ap->hsm_task_state = poll_state; return ATA_SHORT_PAUSE; } - ap->pio_task_state = reg_state; + ap->hsm_task_state = reg_state; return 0; } @@ -2480,14 +2480,14 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { msleep(2); drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { - ap->pio_task_state = PIO_ST_LAST_POLL; + ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return 0; } @@ -2495,14 +2495,14 @@ static int ata_pio_complete (struct ata_port *ap) drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return 0; } qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat); @@ -2662,7 +2662,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned char *buf; if (qc->cursect == (qc->nsect - 1)) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; page = sg[qc->cursg].page; offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; @@ -2712,7 +2712,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned int offset, count; if (qc->curbytes + bytes >= qc->nbytes) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; next_sg: if (unlikely(qc->cursg >= qc->n_elem)) { @@ -2734,7 +2734,7 @@ next_sg: for (i = 0; i < words; i++) ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2815,7 +2815,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; } /** @@ -2837,14 +2837,14 @@ static void ata_pio_block(struct ata_port *ap) * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then * chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ status = ata_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ap->pio_task_state = PIO_ST_POLL; + ap->hsm_task_state = HSM_ST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return; } @@ -2856,7 +2856,7 @@ static void ata_pio_block(struct ata_port *ap) if (is_atapi_taskfile(&qc->tf)) { /* no more data to transfer or unsupported ATAPI command */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2864,7 +2864,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return; } @@ -2884,7 +2884,7 @@ static void ata_pio_error(struct ata_port *ap) printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n", ap->id, drv_stat); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } @@ -2899,25 +2899,25 @@ fsm_start: timeout = 0; qc_completed = 0; - switch (ap->pio_task_state) { - case PIO_ST_IDLE: + switch (ap->hsm_task_state) { + case HSM_ST_IDLE: return; - case PIO_ST: + case HSM_ST: ata_pio_block(ap); break; - case PIO_ST_LAST: + case HSM_ST_LAST: qc_completed = ata_pio_complete(ap); break; - case PIO_ST_POLL: - case PIO_ST_LAST_POLL: + case HSM_ST_POLL: + case HSM_ST_LAST_POLL: timeout = ata_pio_poll(ap); break; - case PIO_ST_TMOUT: - case PIO_ST_ERR: + case HSM_ST_TMOUT: + case HSM_ST_ERR: ata_pio_error(ap); return; } @@ -3360,7 +3360,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ ata_qc_set_polling(qc); ata_tf_to_host_nolock(ap, &qc->tf); - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); break; @@ -3806,7 +3806,7 @@ static void atapi_packet_task(void *_data) ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); /* PIO commands are handled by polling */ - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); } diff --git a/include/linux/libata.h b/include/linux/libata.h index ceee1fc42c60..bb2d916bce44 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -156,15 +156,15 @@ enum { ATA_SHIFT_PIO = 11, }; -enum pio_task_states { - PIO_ST_UNKNOWN, - PIO_ST_IDLE, - PIO_ST_POLL, - PIO_ST_TMOUT, - PIO_ST, - PIO_ST_LAST, - PIO_ST_LAST_POLL, - PIO_ST_ERR, +enum hsm_task_states { + HSM_ST_UNKNOWN, + HSM_ST_IDLE, + HSM_ST_POLL, + HSM_ST_TMOUT, + HSM_ST, + HSM_ST_LAST, + HSM_ST_LAST_POLL, + HSM_ST_ERR, }; /* forward declarations */ @@ -319,7 +319,7 @@ struct ata_port { struct work_struct packet_task; struct work_struct pio_task; - unsigned int pio_task_state; + unsigned int hsm_task_state; unsigned long pio_task_timeout; void *private_data; -- cgit v1.2.3 From 644dd0cc494702ecd0698f467de113ace9593888 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 3 Oct 2005 15:55:19 -0400 Subject: [libata] improve device scan Replace SCSI's legacy "bang at the door" method of probing with one directly controlled by the underlying ATA transport layer. We now only call scsi_scan_target() for devices we find, rather than probing every possible channel/id within a certain range. --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/libata-scsi.c | 12 ++++++++++++ drivers/scsi/libata.h | 1 + 3 files changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..902c76364af7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4113,7 +4113,7 @@ int ata_device_add(struct ata_probe_ent *ent) for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; - scsi_scan_host(ap->host); + ata_scsi_scan_host(ap); } dev_set_drvdata(dev, host_set); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 104fd9a63e73..4fc0134d4272 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1678,3 +1678,15 @@ void ata_scsi_simulate(u16 *id, } } +void ata_scsi_scan_host(struct ata_port *ap) +{ + unsigned int i; + + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_present(&ap->device[i])) + scsi_scan_target(&ap->host->shost_gendev, 0, i, ~0, 0); +} + diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d608b3a0f6fe..c7a1fa1c9abc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -51,6 +51,7 @@ extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, -- cgit v1.2.3 From 3f19ee8cb3a1003cb5183696bc55934f5865f868 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 3 Oct 2005 21:36:41 -0400 Subject: [libata] improve device scan even more Since our max_lun is unconditionally set to 1, we might as well hardcode a LUN 0 probe, rather than a wildcard LUN scan. The ide-scsi driver sets max_lun to a value greater than under certain conditions: if ((drive->id->last_lun & 0x7) != 7) host->max_lun = (drive->id->last_lun & 0x7) + 1; else host->max_lun = 1; last_lun is Word 126 of IDENTIFY PACKET DEVICE, marked as obsolete and undocumented in non-ancient specs. We'll leave it out for now. Should the need arise to support multi-LUN ATAPI devices, we'll probably want to add the above code. Finally, there have been reports of REPORT LUNS commands locking up ATAPI drives. Eliminating the wildcard LUN scan could help reduce the trouble from problematic drives. --- drivers/scsi/libata-scsi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4fc0134d4272..8295a656e521 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1680,13 +1680,17 @@ void ata_scsi_simulate(u16 *id, void ata_scsi_scan_host(struct ata_port *ap) { + struct ata_device *dev; unsigned int i; if (ap->flags & ATA_FLAG_PORT_DISABLED) return; - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_present(&ap->device[i])) - scsi_scan_target(&ap->host->shost_gendev, 0, i, ~0, 0); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_present(dev)) + scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + } } -- cgit v1.2.3 From bab76198b3111bd0328be3c1fa208237eb12f86e Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:18:58 -0700 Subject: [PATCH] hostap: Remove hw specific dev_open/close handlers Host AP driver used hardware model specific dev_open/close handlers that were called on dev_open/close if the hardware driver had registered the handler. These were only used for hostap_cs and only for tracking whether any of the netdevs were UP. This information is already available from local->num_dev_open, so there is not need for the special open/close handler. Let's get rid of these handlers. In addition to cleaning up the code, this fixes a module refcounting issue for hostap_cs where ejecting the card while any of the netdevs were open did not decrement refcount properly. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap.c | 6 ----- drivers/net/wireless/hostap/hostap_cs.c | 45 +++++++------------------------ drivers/net/wireless/hostap/hostap_pci.c | 2 -- drivers/net/wireless/hostap/hostap_plx.c | 2 -- drivers/net/wireless/hostap/hostap_wlan.h | 2 -- 5 files changed, 10 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap.c index e7f5821b4942..6a96cd9f2685 100644 --- a/drivers/net/wireless/hostap/hostap.c +++ b/drivers/net/wireless/hostap/hostap.c @@ -716,9 +716,6 @@ static int prism2_close(struct net_device *dev) hostap_deauth_all_stas(dev, local->ap, 1); #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - if (local->func->dev_close && local->func->dev_close(local)) - return 0; - if (dev == local->dev) { local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); } @@ -766,9 +763,6 @@ static int prism2_open(struct net_device *dev) local->hw_downloading) return -ENODEV; - if (local->func->dev_open && local->func->dev_open(local)) - return 1; - if (!try_module_get(local->hw_module)) return -ENODEV; local->num_dev_open++; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index faa83badf0a1..23bcc51b7131 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -492,42 +492,10 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) } -static int prism2_pccard_dev_open(local_info_t *local) -{ - struct hostap_cs_priv *hw_priv = local->hw_priv; - hw_priv->link->open++; - return 0; -} - - -static int prism2_pccard_dev_close(local_info_t *local) -{ - struct hostap_cs_priv *hw_priv; - - if (local == NULL || local->hw_priv == NULL) - return 1; - hw_priv = local->hw_priv; - if (hw_priv->link == NULL) - return 1; - - if (!hw_priv->link->open) { - printk(KERN_WARNING "%s: prism2_pccard_dev_close(): " - "link not open?!\n", local->dev->name); - return 1; - } - - hw_priv->link->open--; - - return 0; -} - - static struct prism2_helper_functions prism2_pccard_funcs = { .card_present = prism2_pccard_card_present, .cor_sreset = prism2_pccard_cor_sreset, - .dev_open = prism2_pccard_dev_open, - .dev_close = prism2_pccard_dev_close, .genesis_reset = prism2_pccard_genesis_reset, .hw_type = HOSTAP_HW_PCCARD, }; @@ -883,6 +851,13 @@ static int prism2_event(event_t event, int priority, { dev_link_t *link = args->client_data; struct net_device *dev = (struct net_device *) link->priv; + int dev_open = 0; + + if (link->state & DEV_CONFIG) { + struct hostap_interface *iface = netdev_priv(dev); + if (iface && iface->local) + dev_open = iface->local->num_dev_open > 0; + } switch (event) { case CS_EVENT_CARD_INSERTION: @@ -911,7 +886,7 @@ static int prism2_event(event_t event, int priority, case CS_EVENT_RESET_PHYSICAL: PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_RESET_PHYSICAL\n", dev_info); if (link->state & DEV_CONFIG) { - if (link->open) { + if (dev_open) { netif_stop_queue(dev); netif_device_detach(dev); } @@ -931,8 +906,8 @@ static int prism2_event(event_t event, int priority, pcmcia_request_configuration(link->handle, &link->conf); prism2_hw_shutdown(dev, 1); - prism2_hw_config(dev, link->open ? 0 : 1); - if (link->open) { + prism2_hw_config(dev, dev_open ? 0 : 1); + if (dev_open) { netif_device_attach(dev); netif_start_queue(dev); } diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index b9254f73fbaf..594cc29c6175 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -277,8 +277,6 @@ static struct prism2_helper_functions prism2_pci_funcs = { .card_present = NULL, .cor_sreset = prism2_pci_cor_sreset, - .dev_open = NULL, - .dev_close = NULL, .genesis_reset = prism2_pci_genesis_reset, .hw_type = HOSTAP_HW_PCI, }; diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 1abebdf48b20..85d3f8a29539 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -328,8 +328,6 @@ static struct prism2_helper_functions prism2_plx_funcs = { .card_present = NULL, .cor_sreset = prism2_plx_cor_sreset, - .dev_open = NULL, - .dev_close = NULL, .genesis_reset = prism2_plx_genesis_reset, .hw_type = HOSTAP_HW_PLX, }; diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index cc061e1560d3..cfd801559492 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -552,8 +552,6 @@ struct prism2_helper_functions { * (hostap_{cs,plx,pci}.c */ int (*card_present)(local_info_t *local); void (*cor_sreset)(local_info_t *local); - int (*dev_open)(local_info_t *local); - int (*dev_close)(local_info_t *local); void (*genesis_reset)(local_info_t *local, int hcr); /* the following functions are from hostap_hw.c, but they may have some -- cgit v1.2.3 From f7a74447553d698795ba74b7e17e916000b0cb08 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:18:59 -0700 Subject: [PATCH] hostap: Fix hostap_pci build with PRISM2_IO_DEBUG The debug version of I/O functions in hostap_pci had not survived the change to start using hw_priv pointer, so let's fix them to actually define the local hw_priv variable. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_pci.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 594cc29c6175..0d7305dfa690 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -59,11 +59,13 @@ static struct pci_device_id prism2_pci_id_table[] __devinitdata = { static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); @@ -74,12 +76,14 @@ static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; u8 v; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); v = readb(hw_priv->mem_start + a); @@ -91,11 +95,13 @@ static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); @@ -106,12 +112,14 @@ static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; u16 v; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); v = readw(hw_priv->mem_start + a); -- cgit v1.2.3 From c355184cd3cd58c9ffc78f2a17e0ac3563312ea7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:19:00 -0700 Subject: [PATCH] hostap: Do not free local->hw_priv before unregistering netdev local->hw_priv was being freed and set to NULL just before calling prism2_free_local_data(). However, this may expose a race condition in which something ends up trying to use hw_priv during shutdown. I haven't noticed this happening, but better be safe than sorry, so let's postpone hw_priv freeing to happen only after prism2_free_local_data() has returned. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_cs.c | 5 +++-- drivers/net/wireless/hostap/hostap_pci.c | 9 ++------- drivers/net/wireless/hostap/hostap_plx.c | 7 ++----- 3 files changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 23bcc51b7131..2643976a6677 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -565,13 +565,14 @@ static void prism2_detach(dev_link_t *link) *linkp = link->next; /* release net devices */ if (link->priv) { + struct hostap_cs_priv *hw_priv; struct net_device *dev; struct hostap_interface *iface; dev = link->priv; iface = netdev_priv(dev); - kfree(iface->local->hw_priv); - iface->local->hw_priv = NULL; + hw_priv = iface->local->hw_priv; prism2_free_local_data(dev); + kfree(hw_priv); } kfree(link); } diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 0d7305dfa690..da0c80fb941c 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -358,8 +358,6 @@ static int prism2_pci_probe(struct pci_dev *pdev, return hostap_hw_ready(dev); fail: - kfree(hw_priv); - if (irq_registered && dev) free_irq(dev->irq, dev); @@ -370,10 +368,8 @@ static int prism2_pci_probe(struct pci_dev *pdev, err_out_disable: pci_disable_device(pdev); - kfree(hw_priv); - if (local) - local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); return -ENODEV; } @@ -398,9 +394,8 @@ static void prism2_pci_remove(struct pci_dev *pdev) free_irq(dev->irq, dev); mem_start = hw_priv->mem_start; - kfree(hw_priv); - iface->local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); iounmap(mem_start); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 85d3f8a29539..78d67b408b2f 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -568,10 +568,8 @@ static int prism2_plx_probe(struct pci_dev *pdev, return hostap_hw_ready(dev); fail: - kfree(hw_priv); - if (local) - local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); if (irq_registered && dev) free_irq(dev->irq, dev); @@ -604,9 +602,8 @@ static void prism2_plx_remove(struct pci_dev *pdev) if (dev->irq) free_irq(dev->irq, dev); - kfree(iface->local->hw_priv); - iface->local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); pci_disable_device(pdev); } -- cgit v1.2.3 From 7cb3cd090c2725b80561958a362c2ba15a7a8c86 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:19:01 -0700 Subject: [PATCH] hostap: Unregister netdevs before freeing local data Unregister all netdevs before freeing local data. I was unable to trigger any crashes without this change when running busy loops for driver operations when ejecting a Prism2 PC Card. Anyway, should there be a race condition with this, better make it less likely to happen by unregistering the netdevs first. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_hw.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index e533a663deda..59fc15572395 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -3322,6 +3322,18 @@ static void prism2_free_local_data(struct net_device *dev) iface = netdev_priv(dev); local = iface->local; + /* Unregister all netdevs before freeing local data. */ + list_for_each_safe(ptr, n, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_MASTER) { + /* special handling for this interface below */ + continue; + } + hostap_remove_interface(iface->dev, 0, 1); + } + + unregister_netdev(local->dev); + flush_scheduled_work(); if (timer_pending(&local->crypt_deinit_timer)) @@ -3382,15 +3394,6 @@ static void prism2_free_local_data(struct net_device *dev) prism2_download_free_data(local->dl_sec); #endif /* PRISM2_DOWNLOAD_SUPPORT */ - list_for_each_safe(ptr, n, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type == HOSTAP_INTERFACE_MASTER) { - /* special handling for this interface below */ - continue; - } - hostap_remove_interface(iface->dev, 0, 1); - } - prism2_clear_set_tim_queue(local); list_for_each_safe(ptr, n, &local->bss_list) { @@ -3403,7 +3406,6 @@ static void prism2_free_local_data(struct net_device *dev) kfree(local->last_scan_results); kfree(local->generic_elem); - unregister_netdev(local->dev); free_netdev(local->dev); } -- cgit v1.2.3 From 500f83abdc83d6bd472f3d103a9a9cd85df29a29 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 30 Sep 2005 10:19:19 +0200 Subject: [PATCH] s390: introducing support in qeth for new OSA CHPID type OSN This patch introduces new feature in qeth: qeth enhancement provides the device driver support for the Communication Controller for Linux on System z9 and zSeries (CCL), which is software that enables running the Network Control Program (NCP) on a zSeries machine. The OSA CDLC support is based on a new IBM mainframe CHPID type called Open Systems Adaper for NCP (OSN). In case of OSN qeth communicates with the type-OSN OSA-card on one hand, and with the CCL-kernel-component Network Device Handler (NDH) on the other. Signed-off-by: Frank Pavlic Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth.h | 45 ++++- drivers/s390/net/qeth_fs.h | 12 +- drivers/s390/net/qeth_main.c | 419 ++++++++++++++++++++++++++++++++----------- drivers/s390/net/qeth_mpc.c | 6 +- drivers/s390/net/qeth_mpc.h | 15 +- drivers/s390/net/qeth_sys.c | 28 ++- 6 files changed, 413 insertions(+), 112 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h index 9963479ba89f..38a2441564d7 100644 --- a/drivers/s390/net/qeth.h +++ b/drivers/s390/net/qeth.h @@ -275,6 +275,10 @@ qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, enum qeth_ipa_funcs func) QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT, \ QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT, \ QETH_MAX_QUEUES,0x103}, \ + {0x1731,0x06,0x1732,0x06,QETH_CARD_TYPE_OSN,0, \ + QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \ + QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \ + QETH_MAX_QUEUES,0}, \ {0,0,0,0,0,0,0,0,0}} #define QETH_REAL_CARD 1 @@ -363,10 +367,22 @@ struct qeth_hdr_layer2 { __u8 reserved2[16]; } __attribute__ ((packed)); +struct qeth_hdr_osn { + __u8 id; + __u8 reserved; + __u16 seq_no; + __u16 reserved2; + __u16 control_flags; + __u16 pdu_length; + __u8 reserved3[18]; + __u32 ccid; +} __attribute__ ((packed)); + struct qeth_hdr { union { struct qeth_hdr_layer2 l2; struct qeth_hdr_layer3 l3; + struct qeth_hdr_osn osn; } hdr; } __attribute__ ((packed)); @@ -413,6 +429,7 @@ enum qeth_header_ids { QETH_HEADER_TYPE_LAYER3 = 0x01, QETH_HEADER_TYPE_LAYER2 = 0x02, QETH_HEADER_TYPE_TSO = 0x03, + QETH_HEADER_TYPE_OSN = 0x04, }; /* flags for qeth_hdr.ext_flags */ #define QETH_HDR_EXT_VLAN_FRAME 0x01 @@ -582,7 +599,6 @@ enum qeth_card_states { * Protocol versions */ enum qeth_prot_versions { - QETH_PROT_SNA = 0x0001, QETH_PROT_IPV4 = 0x0004, QETH_PROT_IPV6 = 0x0006, }; @@ -761,6 +777,11 @@ enum qeth_threads { QETH_RECOVER_THREAD = 2, }; +struct qeth_osn_info { + int (*assist_cb)(struct net_device *dev, void *data); + int (*data_cb)(struct sk_buff *skb); +}; + struct qeth_card { struct list_head list; enum qeth_card_states state; @@ -803,6 +824,7 @@ struct qeth_card { int use_hard_stop; int (*orig_hard_header)(struct sk_buff *,struct net_device *, unsigned short,void *,void *,unsigned); + struct qeth_osn_info osn_info; }; struct qeth_card_list_struct { @@ -916,10 +938,12 @@ qeth_get_hlen(__u8 link_type) static inline unsigned short qeth_get_netdev_flags(struct qeth_card *card) { - if (card->options.layer2) + if (card->options.layer2 && + (card->info.type == QETH_CARD_TYPE_OSAE)) return 0; switch (card->info.type) { case QETH_CARD_TYPE_IQD: + case QETH_CARD_TYPE_OSN: return IFF_NOARP; #ifdef CONFIG_QETH_IPV6 default: @@ -956,9 +980,10 @@ static inline int qeth_get_max_mtu_for_card(int cardtype) { switch (cardtype) { + case QETH_CARD_TYPE_UNKNOWN: - return 61440; case QETH_CARD_TYPE_OSAE: + case QETH_CARD_TYPE_OSN: return 61440; case QETH_CARD_TYPE_IQD: return 57344; @@ -1004,6 +1029,7 @@ qeth_mtu_is_valid(struct qeth_card * card, int mtu) case QETH_CARD_TYPE_IQD: return ((mtu >= 576) && (mtu <= card->info.max_mtu + 4096 - 32)); + case QETH_CARD_TYPE_OSN: case QETH_CARD_TYPE_UNKNOWN: default: return 1; @@ -1015,6 +1041,7 @@ qeth_get_arphdr_type(int cardtype, int linktype) { switch (cardtype) { case QETH_CARD_TYPE_OSAE: + case QETH_CARD_TYPE_OSN: switch (linktype) { case QETH_LINK_TYPE_LANE_TR: case QETH_LINK_TYPE_HSTR: @@ -1182,4 +1209,16 @@ qeth_fill_header(struct qeth_card *, struct qeth_hdr *, extern void qeth_flush_buffers(struct qeth_qdio_out_q *, int, int, int); +extern int +qeth_osn_assist(struct net_device *, void *, int); + +extern int +qeth_osn_register(unsigned char *read_dev_no, + struct net_device **, + int (*assist_cb)(struct net_device *, void *), + int (*data_cb)(struct sk_buff *)); + +extern void +qeth_osn_deregister(struct net_device *); + #endif /* __QETH_H__ */ diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h index 5c9a51ce91b6..c0b4c8d82c45 100644 --- a/drivers/s390/net/qeth_fs.h +++ b/drivers/s390/net/qeth_fs.h @@ -12,7 +12,7 @@ #ifndef __QETH_FS_H__ #define __QETH_FS_H__ -#define VERSION_QETH_FS_H "$Revision: 1.9 $" +#define VERSION_QETH_FS_H "$Revision: 1.10 $" extern const char *VERSION_QETH_PROC_C; extern const char *VERSION_QETH_SYS_C; @@ -42,6 +42,12 @@ qeth_create_device_attributes(struct device *dev); extern void qeth_remove_device_attributes(struct device *dev); +extern int +qeth_create_device_attributes_osn(struct device *dev); + +extern void +qeth_remove_device_attributes_osn(struct device *dev); + extern int qeth_create_driver_attributes(void); @@ -108,6 +114,8 @@ qeth_get_cardname(struct qeth_card *card) return " OSD Express"; case QETH_CARD_TYPE_IQD: return " HiperSockets"; + case QETH_CARD_TYPE_OSN: + return " OSN QDIO"; default: return " unknown"; } @@ -153,6 +161,8 @@ qeth_get_cardname_short(struct qeth_card *card) } case QETH_CARD_TYPE_IQD: return "HiperSockets"; + case QETH_CARD_TYPE_OSN: + return "OSN"; default: return "unknown"; } diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index bd28e2438d7f..692003c9f896 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -196,7 +196,6 @@ qeth_notifier_register(struct task_struct *p, int signum) { struct qeth_notify_list_struct *n_entry; - /*check first if entry already exists*/ spin_lock(&qeth_notify_lock); list_for_each_entry(n_entry, &qeth_notify_list, list) { @@ -1024,7 +1023,10 @@ qeth_set_intial_options(struct qeth_card *card) card->options.fake_broadcast = 0; card->options.add_hhlen = DEFAULT_ADD_HHLEN; card->options.fake_ll = 0; - card->options.layer2 = 0; + if (card->info.type == QETH_CARD_TYPE_OSN) + card->options.layer2 = 1; + else + card->options.layer2 = 0; } /** @@ -1113,19 +1115,20 @@ qeth_determine_card_type(struct qeth_card *card) QETH_DBF_TEXT(setup, 2, "detcdtyp"); + card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; while (known_devices[i][4]) { if ((CARD_RDEV(card)->id.dev_type == known_devices[i][2]) && (CARD_RDEV(card)->id.dev_model == known_devices[i][3])) { card->info.type = known_devices[i][4]; + card->qdio.no_out_queues = known_devices[i][8]; + card->info.is_multicast_different = known_devices[i][9]; if (is_1920_device(card)) { PRINT_INFO("Priority Queueing not able " "due to hardware limitations!\n"); card->qdio.no_out_queues = 1; card->qdio.default_out_queue = 0; - } else { - card->qdio.no_out_queues = known_devices[i][8]; - } - card->info.is_multicast_different = known_devices[i][9]; + } return 0; } i++; @@ -1149,6 +1152,8 @@ qeth_probe_device(struct ccwgroup_device *gdev) if (!get_device(dev)) return -ENODEV; + QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id); + card = qeth_alloc_card(); if (!card) { put_device(dev); @@ -1158,28 +1163,27 @@ qeth_probe_device(struct ccwgroup_device *gdev) card->read.ccwdev = gdev->cdev[0]; card->write.ccwdev = gdev->cdev[1]; card->data.ccwdev = gdev->cdev[2]; - - if ((rc = qeth_setup_card(card))){ - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - put_device(dev); - qeth_free_card(card); - return rc; - } gdev->dev.driver_data = card; card->gdev = gdev; gdev->cdev[0]->handler = qeth_irq; gdev->cdev[1]->handler = qeth_irq; gdev->cdev[2]->handler = qeth_irq; - rc = qeth_create_device_attributes(dev); - if (rc) { + if ((rc = qeth_determine_card_type(card))){ + PRINT_WARN("%s: not a valid card type\n", __func__); + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + put_device(dev); + qeth_free_card(card); + return rc; + } + if ((rc = qeth_setup_card(card))){ + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); put_device(dev); qeth_free_card(card); return rc; } - if ((rc = qeth_determine_card_type(card))){ - PRINT_WARN("%s: not a valid card type\n", __func__); - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + rc = qeth_create_device_attributes(dev); + if (rc) { put_device(dev); qeth_free_card(card); return rc; @@ -1660,6 +1664,8 @@ qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) netif_carrier_on(card->dev); qeth_schedule_recovery(card); return NULL; + case IPA_CMD_MODCCID: + return cmd; case IPA_CMD_REGISTER_LOCAL_ADDR: QETH_DBF_TEXT(trace,3, "irla"); break; @@ -1721,6 +1727,14 @@ qeth_send_control_data_cb(struct qeth_channel *channel, cmd = qeth_check_ipa_data(card, iob); if ((cmd == NULL) && (card->state != CARD_STATE_DOWN)) goto out; + /*in case of OSN : check if cmd is set */ + if (card->info.type == QETH_CARD_TYPE_OSN && + cmd && + cmd->hdr.command != IPA_CMD_STARTLAN && + card->osn_info.assist_cb != NULL) { + card->osn_info.assist_cb(card->dev, cmd); + goto out; + } spin_lock_irqsave(&card->lock, flags); list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) { @@ -1737,8 +1751,7 @@ qeth_send_control_data_cb(struct qeth_channel *channel, keep_reply = reply->callback(card, reply, (unsigned long)cmd); - } - else + } else keep_reply = reply->callback(card, reply, (unsigned long)iob); @@ -1768,6 +1781,24 @@ out: qeth_release_buffer(channel,iob); } +static inline void +qeth_prepare_control_data(struct qeth_card *card, int len, +struct qeth_cmd_buffer *iob) +{ + qeth_setup_ccw(&card->write,iob->data,len); + iob->callback = qeth_release_buffer; + + memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), + &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.trans_hdr++; + memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data), + &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.pdu_hdr++; + memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data), + &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH); + QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); +} + static int qeth_send_control_data(struct qeth_card *card, int len, struct qeth_cmd_buffer *iob, @@ -1778,24 +1809,11 @@ qeth_send_control_data(struct qeth_card *card, int len, { int rc; unsigned long flags; - struct qeth_reply *reply; + struct qeth_reply *reply = NULL; struct timer_list timer; QETH_DBF_TEXT(trace, 2, "sendctl"); - qeth_setup_ccw(&card->write,iob->data,len); - - memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), - &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.trans_hdr++; - - memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data), - &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.pdu_hdr++; - memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data), - &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH); - iob->callback = qeth_release_buffer; - reply = qeth_alloc_reply(card); if (!reply) { PRINT_WARN("Could no alloc qeth_reply!\n"); @@ -1810,10 +1828,6 @@ qeth_send_control_data(struct qeth_card *card, int len, init_timer(&timer); timer.function = qeth_cmd_timeout; timer.data = (unsigned long) reply; - if (IS_IPA(iob->data)) - timer.expires = jiffies + QETH_IPA_TIMEOUT; - else - timer.expires = jiffies + QETH_TIMEOUT; init_waitqueue_head(&reply->wait_q); spin_lock_irqsave(&card->lock, flags); list_add_tail(&reply->list, &card->cmd_waiter_list); @@ -1821,6 +1835,11 @@ qeth_send_control_data(struct qeth_card *card, int len, QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); wait_event(card->wait_q, atomic_compare_and_swap(0,1,&card->write.irq_pending) == 0); + qeth_prepare_control_data(card, len, iob); + if (IS_IPA(iob->data)) + timer.expires = jiffies + QETH_IPA_TIMEOUT; + else + timer.expires = jiffies + QETH_TIMEOUT; QETH_DBF_TEXT(trace, 6, "noirqpnd"); spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, @@ -1847,6 +1866,62 @@ qeth_send_control_data(struct qeth_card *card, int len, return rc; } +static int +qeth_osn_send_control_data(struct qeth_card *card, int len, + struct qeth_cmd_buffer *iob) +{ + unsigned long flags; + int rc = 0; + + QETH_DBF_TEXT(trace, 5, "osndctrd"); + + wait_event(card->wait_q, + atomic_compare_and_swap(0,1,&card->write.irq_pending) == 0); + qeth_prepare_control_data(card, len, iob); + QETH_DBF_TEXT(trace, 6, "osnoirqp"); + spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); + rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, + (addr_t) iob, 0, 0); + spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); + if (rc){ + PRINT_WARN("qeth_osn_send_control_data: " + "ccw_device_start rc = %i\n", rc); + QETH_DBF_TEXT_(trace, 2, " err%d", rc); + qeth_release_buffer(iob->channel, iob); + atomic_set(&card->write.irq_pending, 0); + wake_up(&card->wait_q); + } + return rc; +} + +static inline void +qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, + char prot_type) +{ + memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); + memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1); + memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), + &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); +} + +static int +qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, + int data_len) +{ + u16 s1, s2; + +QETH_DBF_TEXT(trace,4,"osndipa"); + + qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2); + s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len); + s2 = (u16)data_len; + memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2); + memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2); + return qeth_osn_send_control_data(card, s1, iob); +} + static int qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, int (*reply_cb) @@ -1858,17 +1933,14 @@ qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, QETH_DBF_TEXT(trace,4,"sendipa"); - memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); - if (card->options.layer2) - prot_type = QETH_PROT_LAYER2; + if (card->info.type == QETH_CARD_TYPE_OSN) + prot_type = QETH_PROT_OSN2; + else + prot_type = QETH_PROT_LAYER2; else prot_type = QETH_PROT_TCPIP; - - memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1); - memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), - &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); - + qeth_prepare_ipa_cmd(card,iob,prot_type); rc = qeth_send_control_data(card, IPA_CMD_LENGTH, iob, reply_cb, reply_param); return rc; @@ -2010,7 +2082,10 @@ qeth_ulp_enable(struct qeth_card *card) *(QETH_ULP_ENABLE_LINKNUM(iob->data)) = (__u8) card->info.portno; if (card->options.layer2) - prot_type = QETH_PROT_LAYER2; + if (card->info.type == QETH_CARD_TYPE_OSN) + prot_type = QETH_PROT_OSN2; + else + prot_type = QETH_PROT_LAYER2; else prot_type = QETH_PROT_TCPIP; @@ -2100,15 +2175,21 @@ qeth_check_for_inbound_error(struct qeth_qdio_buffer *buf, } static inline struct sk_buff * -qeth_get_skb(unsigned int length) +qeth_get_skb(unsigned int length, struct qeth_hdr *hdr) { struct sk_buff* skb; + int add_len; + + add_len = 0; + if (hdr->hdr.osn.id == QETH_HEADER_TYPE_OSN) + add_len = sizeof(struct qeth_hdr); #ifdef CONFIG_QETH_VLAN - if ((skb = dev_alloc_skb(length + VLAN_HLEN))) - skb_reserve(skb, VLAN_HLEN); -#else - skb = dev_alloc_skb(length); + else + add_len = VLAN_HLEN; #endif + skb = dev_alloc_skb(length + add_len); + if (skb && add_len) + skb_reserve(skb, add_len); return skb; } @@ -2138,7 +2219,10 @@ qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer, offset += sizeof(struct qeth_hdr); if (card->options.layer2) - skb_len = (*hdr)->hdr.l2.pkt_length; + if (card->info.type == QETH_CARD_TYPE_OSN) + skb_len = (*hdr)->hdr.osn.pdu_length; + else + skb_len = (*hdr)->hdr.l2.pkt_length; else skb_len = (*hdr)->hdr.l3.length; @@ -2146,15 +2230,15 @@ qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer, return NULL; if (card->options.fake_ll){ if(card->dev->type == ARPHRD_IEEE802_TR){ - if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR))) + if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR, *hdr))) goto no_mem; skb_reserve(skb,QETH_FAKE_LL_LEN_TR); } else { - if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH))) + if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH, *hdr))) goto no_mem; skb_reserve(skb,QETH_FAKE_LL_LEN_ETH); } - } else if (!(skb = qeth_get_skb(skb_len))) + } else if (!(skb = qeth_get_skb(skb_len, *hdr))) goto no_mem; data_ptr = element->addr + offset; while (skb_len) { @@ -2453,8 +2537,12 @@ qeth_process_inbound_buffer(struct qeth_card *card, skb->dev = card->dev; if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2) vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr); - else + else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3) qeth_rebuild_skb(card, skb, hdr); + else { /*in case of OSN*/ + skb_push(skb, sizeof(struct qeth_hdr)); + memcpy(skb->data, hdr, sizeof(struct qeth_hdr)); + } /* is device UP ? */ if (!(card->dev->flags & IFF_UP)){ dev_kfree_skb_any(skb); @@ -2465,7 +2553,10 @@ qeth_process_inbound_buffer(struct qeth_card *card, vlan_hwaccel_rx(skb, card->vlangrp, vlan_tag); else #endif - rxrc = netif_rx(skb); + if (card->info.type == QETH_CARD_TYPE_OSN) + rxrc = card->osn_info.data_cb(skb); + else + rxrc = netif_rx(skb); card->dev->last_rx = jiffies; card->stats.rx_packets++; card->stats.rx_bytes += skb->len; @@ -3150,8 +3241,6 @@ qeth_init_qdio_info(struct qeth_card *card) INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list); INIT_LIST_HEAD(&card->qdio.init_pool.entry_list); /* outbound */ - card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; - card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } static int @@ -3466,7 +3555,7 @@ qeth_mpc_initialize(struct qeth_card *card) return 0; out_qdio: - qeth_qdio_clear_card(card, card->info.type==QETH_CARD_TYPE_OSAE); + qeth_qdio_clear_card(card, card->info.type!=QETH_CARD_TYPE_IQD); return rc; } @@ -3491,6 +3580,9 @@ qeth_get_netdevice(enum qeth_card_types type, enum qeth_link_types linktype) case QETH_CARD_TYPE_IQD: dev = alloc_netdev(0, "hsi%d", ether_setup); break; + case QETH_CARD_TYPE_OSN: + dev = alloc_netdev(0, "osn%d", ether_setup); + break; default: dev = alloc_etherdev(0); } @@ -3655,7 +3747,8 @@ qeth_open(struct net_device *dev) if (card->state != CARD_STATE_SOFTSETUP) return -ENODEV; - if ( (card->options.layer2) && + if ( (card->info.type != QETH_CARD_TYPE_OSN) && + (card->options.layer2) && (!card->info.layer2_mac_registered)) { QETH_DBF_TEXT(trace,4,"nomacadr"); return -EPERM; @@ -3693,6 +3786,9 @@ qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb) { int cast_type = RTN_UNSPEC; + if (card->info.type == QETH_CARD_TYPE_OSN) + return cast_type; + if (skb->dst && skb->dst->neighbour){ cast_type = skb->dst->neighbour->type; if ((cast_type == RTN_BROADCAST) || @@ -3782,13 +3878,16 @@ static inline int qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb, struct qeth_hdr **hdr, int ipv) { - int rc; + int rc = 0; #ifdef CONFIG_QETH_VLAN u16 *tag; #endif QETH_DBF_TEXT(trace, 6, "prepskb"); - + if (card->info.type == QETH_CARD_TYPE_OSN) { + *hdr = (struct qeth_hdr *)(*skb)->data; + return rc; + } rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr)); if (rc) return rc; @@ -4291,8 +4390,14 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) } } } + if ((card->info.type == QETH_CARD_TYPE_OSN) && + (skb->protocol == htons(ETH_P_IPV6))) { + dev_kfree_skb_any(skb); + return 0; + } cast_type = qeth_get_cast_type(card, skb); - if ((cast_type == RTN_BROADCAST) && (card->info.broadcast_capable == 0)){ + if ((cast_type == RTN_BROADCAST) && + (card->info.broadcast_capable == 0)){ card->stats.tx_dropped++; card->stats.tx_errors++; dev_kfree_skb_any(skb); @@ -4320,7 +4425,8 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc); return rc; } - qeth_fill_header(card, hdr, skb, ipv, cast_type); + if (card->info.type != QETH_CARD_TYPE_OSN) + qeth_fill_header(card, hdr, skb, ipv, cast_type); } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -4381,6 +4487,7 @@ qeth_mdio_read(struct net_device *dev, int phy_id, int regnum) case MII_BMCR: /* Basic mode control register */ rc = BMCR_FULLDPLX; if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH)&& + (card->info.link_type != QETH_LINK_TYPE_OSN) && (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH)) rc |= BMCR_SPEED100; break; @@ -5004,6 +5111,9 @@ qeth_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) (card->state != CARD_STATE_SOFTSETUP)) return -ENODEV; + if (card->info.type == QETH_CARD_TYPE_OSN) + return -EPERM; + switch (cmd){ case SIOC_QETH_ARP_SET_NO_ENTRIES: if ( !capable(CAP_NET_ADMIN) || @@ -5329,6 +5439,9 @@ qeth_set_multicast_list(struct net_device *dev) { struct qeth_card *card = (struct qeth_card *) dev->priv; + if (card->info.type == QETH_CARD_TYPE_OSN) + return ; + QETH_DBF_TEXT(trace,3,"setmulti"); qeth_delete_mc_addresses(card); qeth_add_multicast_ipv4(card); @@ -5370,6 +5483,94 @@ qeth_get_addr_buffer(enum qeth_prot_versions prot) return addr; } +int +qeth_osn_assist(struct net_device *dev, + void *data, + int data_len) +{ + struct qeth_cmd_buffer *iob; + struct qeth_card *card; + int rc; + + QETH_DBF_TEXT(trace, 2, "osnsdmc"); + if (!dev) + return -ENODEV; + card = (struct qeth_card *)dev->priv; + if (!card) + return -ENODEV; + if ((card->state != CARD_STATE_UP) && + (card->state != CARD_STATE_SOFTSETUP)) + return -ENODEV; + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data+IPA_PDU_HEADER_SIZE, data, data_len); + rc = qeth_osn_send_ipa_cmd(card, iob, data_len); + return rc; +} + +static struct net_device * +qeth_netdev_by_devno(unsigned char *read_dev_no) +{ + struct qeth_card *card; + struct net_device *ndev; + unsigned char *readno; + __u16 temp_dev_no, card_dev_no; + char *endp; + unsigned long flags; + + ndev = NULL; + memcpy(&temp_dev_no, read_dev_no, 2); + read_lock_irqsave(&qeth_card_list.rwlock, flags); + list_for_each_entry(card, &qeth_card_list.list, list) { + readno = CARD_RDEV_ID(card); + readno += (strlen(readno) - 4); + card_dev_no = simple_strtoul(readno, &endp, 16); + if (card_dev_no == temp_dev_no) { + ndev = card->dev; + break; + } + } + read_unlock_irqrestore(&qeth_card_list.rwlock, flags); + return ndev; +} + +int +qeth_osn_register(unsigned char *read_dev_no, + struct net_device **dev, + int (*assist_cb)(struct net_device *, void *), + int (*data_cb)(struct sk_buff *)) +{ + struct qeth_card * card; + + QETH_DBF_TEXT(trace, 2, "osnreg"); + *dev = qeth_netdev_by_devno(read_dev_no); + if (*dev == NULL) + return -ENODEV; + card = (struct qeth_card *)(*dev)->priv; + if (!card) + return -ENODEV; + if ((assist_cb == NULL) || (data_cb == NULL)) + return -EINVAL; + card->osn_info.assist_cb = assist_cb; + card->osn_info.data_cb = data_cb; + return 0; +} + +void +qeth_osn_deregister(struct net_device * dev) +{ + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 2, "osndereg"); + if (!dev) + return; + card = (struct qeth_card *)dev->priv; + if (!card) + return; + card->osn_info.assist_cb = NULL; + card->osn_info.data_cb = NULL; + return; +} + static void qeth_delete_mc_addresses(struct qeth_card *card) { @@ -5700,6 +5901,12 @@ qeth_layer2_set_mac_address(struct net_device *dev, void *p) QETH_DBF_TEXT(trace, 3, "setmcLY3"); return -EOPNOTSUPP; } + if (card->info.type == QETH_CARD_TYPE_OSN) { + PRINT_WARN("Setting MAC address on %s is not supported.\n", + dev->name); + QETH_DBF_TEXT(trace, 3, "setmcOSN"); + return -EOPNOTSUPP; + } QETH_DBF_TEXT_(trace, 3, "%s", CARD_BUS_ID(card)); QETH_DBF_HEX(trace, 3, addr->sa_data, OSA_ADDR_LEN); rc = qeth_layer2_send_delmac(card, &card->dev->dev_addr[0]); @@ -6076,9 +6283,8 @@ qeth_netdev_init(struct net_device *dev) qeth_get_hlen(card->info.link_type) + card->options.add_hhlen; dev->addr_len = OSA_ADDR_LEN; dev->mtu = card->info.initial_mtu; - - SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops); - + if (card->info.type != QETH_CARD_TYPE_OSN) + SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops); SET_MODULE_OWNER(dev); return 0; } @@ -6095,6 +6301,7 @@ qeth_init_func_level(struct qeth_card *card) QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT; } else { if (card->info.type == QETH_CARD_TYPE_IQD) + /*FIXME:why do we have same values for dis and ena for osae??? */ card->info.func_level = QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT; else @@ -6124,7 +6331,7 @@ retry: ccw_device_set_online(CARD_WDEV(card)); ccw_device_set_online(CARD_DDEV(card)); } - rc = qeth_qdio_clear_card(card,card->info.type==QETH_CARD_TYPE_OSAE); + rc = qeth_qdio_clear_card(card,card->info.type!=QETH_CARD_TYPE_IQD); if (rc == -ERESTARTSYS) { QETH_DBF_TEXT(setup, 2, "break1"); return rc; @@ -6176,8 +6383,8 @@ retry: card->dev = qeth_get_netdevice(card->info.type, card->info.link_type); if (!card->dev){ - qeth_qdio_clear_card(card, card->info.type == - QETH_CARD_TYPE_OSAE); + qeth_qdio_clear_card(card, card->info.type != + QETH_CARD_TYPE_IQD); rc = -ENODEV; QETH_DBF_TEXT_(setup, 2, "6err%d", rc); goto out; @@ -7084,6 +7291,8 @@ qeth_softsetup_card(struct qeth_card *card) return rc; } else card->lan_online = 1; + if (card->info.type==QETH_CARD_TYPE_OSN) + goto out; if (card->options.layer2) { card->dev->features |= NETIF_F_HW_VLAN_FILTER | @@ -7255,7 +7464,8 @@ qeth_stop_card(struct qeth_card *card, int recovery_mode) if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { - if(recovery_mode) { + if (recovery_mode && + card->info.type != QETH_CARD_TYPE_OSN) { qeth_stop(card->dev); } else { rtnl_lock(); @@ -7437,7 +7647,8 @@ qeth_start_again(struct qeth_card *card, int recovery_mode) { QETH_DBF_TEXT(setup ,2, "startag"); - if(recovery_mode) { + if (recovery_mode && + card->info.type != QETH_CARD_TYPE_OSN) { qeth_open(card->dev); } else { rtnl_lock(); @@ -7469,33 +7680,36 @@ qeth_start_again(struct qeth_card *card, int recovery_mode) static void qeth_make_parameters_consistent(struct qeth_card *card) { - if (card->options.layer2) { - if (card->info.type == QETH_CARD_TYPE_IQD) { - PRINT_ERR("Device %s does not support " \ - "layer 2 functionality. " \ - "Ignoring layer2 option.\n",CARD_BUS_ID(card)); - } - IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER, - "Routing options are"); + if (card->options.layer2 == 0) + return; + if (card->info.type == QETH_CARD_TYPE_OSN) + return; + if (card->info.type == QETH_CARD_TYPE_IQD) { + PRINT_ERR("Device %s does not support layer 2 functionality." \ + " Ignoring layer2 option.\n",CARD_BUS_ID(card)); + card->options.layer2 = 0; + return; + } + IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER, + "Routing options are"); #ifdef CONFIG_QETH_IPV6 - IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER, - "Routing options are"); + IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER, + "Routing options are"); #endif - IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING, - QETH_CHECKSUM_DEFAULT, - "Checksumming options are"); - IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS, - QETH_TR_BROADCAST_ALLRINGS, - "Broadcast mode options are"); - IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL, - QETH_TR_MACADDR_NONCANONICAL, - "Canonical MAC addr options are"); - IGNORE_PARAM_NEQ(fake_broadcast, 0, 0, - "Broadcast faking options are"); - IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN, - DEFAULT_ADD_HHLEN,"Option add_hhlen is"); - IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is"); - } + IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING, + QETH_CHECKSUM_DEFAULT, + "Checksumming options are"); + IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS, + QETH_TR_BROADCAST_ALLRINGS, + "Broadcast mode options are"); + IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL, + QETH_TR_MACADDR_NONCANONICAL, + "Canonical MAC addr options are"); + IGNORE_PARAM_NEQ(fake_broadcast, 0, 0, + "Broadcast faking options are"); + IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN, + DEFAULT_ADD_HHLEN,"Option add_hhlen is"); + IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is"); } @@ -7525,8 +7739,7 @@ __qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode) return -EIO; } - if (card->options.layer2) - qeth_make_parameters_consistent(card); + qeth_make_parameters_consistent(card); if ((rc = qeth_hardsetup_card(card))){ QETH_DBF_TEXT_(setup, 2, "2err%d", rc); @@ -7585,6 +7798,7 @@ qeth_set_online(struct ccwgroup_device *gdev) static struct ccw_device_id qeth_ids[] = { {CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE}, {CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD}, + {CCW_DEVICE(0x1731, 0x06), driver_info:QETH_CARD_TYPE_OSN}, {}, }; MODULE_DEVICE_TABLE(ccw, qeth_ids); @@ -8329,6 +8543,9 @@ again: printk("qeth: removed\n"); } +EXPORT_SYMBOL(qeth_osn_register); +EXPORT_SYMBOL(qeth_osn_deregister); +EXPORT_SYMBOL(qeth_osn_assist); module_init(qeth_init); module_exit(qeth_exit); MODULE_AUTHOR("Frank Pavlic "); diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c index f685ecc7da99..30e053d3cac2 100644 --- a/drivers/s390/net/qeth_mpc.c +++ b/drivers/s390/net/qeth_mpc.c @@ -11,7 +11,7 @@ #include #include "qeth_mpc.h" -const char *VERSION_QETH_MPC_C = "$Revision: 1.11 $"; +const char *VERSION_QETH_MPC_C = "$Revision: 1.12 $"; unsigned char IDX_ACTIVATE_READ[]={ 0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00, @@ -138,7 +138,9 @@ unsigned char IPA_PDU_HEADER[]={ sizeof(struct qeth_ipa_cmd)%256, 0x00, sizeof(struct qeth_ipa_cmd)/256, - sizeof(struct qeth_ipa_cmd),0x05, 0x77,0x77,0x77,0x77, + sizeof(struct qeth_ipa_cmd)%256, + 0x05, + 0x77,0x77,0x77,0x77, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, 0x01,0x00, sizeof(struct qeth_ipa_cmd)/256, diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h index 3d916b5c5d09..7edc5f1fc0d2 100644 --- a/drivers/s390/net/qeth_mpc.h +++ b/drivers/s390/net/qeth_mpc.h @@ -46,13 +46,16 @@ extern unsigned char IPA_PDU_HEADER[]; /* IP Assist related definitions */ /*****************************************************************************/ #define IPA_CMD_INITIATOR_HOST 0x00 -#define IPA_CMD_INITIATOR_HYDRA 0x01 +#define IPA_CMD_INITIATOR_OSA 0x01 +#define IPA_CMD_INITIATOR_HOST_REPLY 0x80 +#define IPA_CMD_INITIATOR_OSA_REPLY 0x81 #define IPA_CMD_PRIM_VERSION_NO 0x01 enum qeth_card_types { QETH_CARD_TYPE_UNKNOWN = 0, QETH_CARD_TYPE_OSAE = 10, QETH_CARD_TYPE_IQD = 1234, + QETH_CARD_TYPE_OSN = 11, }; #define QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE 0x18 @@ -61,6 +64,7 @@ enum qeth_link_types { QETH_LINK_TYPE_FAST_ETH = 0x01, QETH_LINK_TYPE_HSTR = 0x02, QETH_LINK_TYPE_GBIT_ETH = 0x03, + QETH_LINK_TYPE_OSN = 0x04, QETH_LINK_TYPE_10GBIT_ETH = 0x10, QETH_LINK_TYPE_LANE_ETH100 = 0x81, QETH_LINK_TYPE_LANE_TR = 0x82, @@ -111,6 +115,9 @@ enum qeth_ipa_cmds { IPA_CMD_DELGMAC = 0x24, IPA_CMD_SETVLAN = 0x25, IPA_CMD_DELVLAN = 0x26, + IPA_CMD_SETCCID = 0x41, + IPA_CMD_DELCCID = 0x42, + IPA_CMD_MODCCID = 0x43, IPA_CMD_SETIP = 0xb1, IPA_CMD_DELIP = 0xb7, IPA_CMD_QIPASSIST = 0xb2, @@ -437,8 +444,9 @@ enum qeth_ipa_arp_return_codes { #define QETH_ARP_DATA_SIZE 3968 #define QETH_ARP_CMD_LEN (QETH_ARP_DATA_SIZE + 8) /* Helper functions */ -#define IS_IPA_REPLY(cmd) (cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) - +#define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \ + (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY)) + /*****************************************************************************/ /* END OF IP Assist related definitions */ /*****************************************************************************/ @@ -483,6 +491,7 @@ extern unsigned char ULP_ENABLE[]; /* Layer 2 defintions */ #define QETH_PROT_LAYER2 0x08 #define QETH_PROT_TCPIP 0x03 +#define QETH_PROT_OSN2 0x0a #define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50) #define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19) diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c index dda105b73063..f91a02db5743 100644 --- a/drivers/s390/net/qeth_sys.c +++ b/drivers/s390/net/qeth_sys.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.54 $) + * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.55 $) * * Linux on zSeries OSA Express and HiperSockets support * This file contains code related to sysfs. @@ -20,7 +20,7 @@ #include "qeth_mpc.h" #include "qeth_fs.h" -const char *VERSION_QETH_SYS_C = "$Revision: 1.54 $"; +const char *VERSION_QETH_SYS_C = "$Revision: 1.55 $"; /*****************************************************************************/ /* */ @@ -937,6 +937,19 @@ static struct attribute_group qeth_device_attr_group = { .attrs = (struct attribute **)qeth_device_attrs, }; +static struct device_attribute * qeth_osn_device_attrs[] = { + &dev_attr_state, + &dev_attr_chpid, + &dev_attr_if_name, + &dev_attr_card_type, + &dev_attr_buffer_count, + &dev_attr_recover, + NULL, +}; + +static struct attribute_group qeth_osn_device_attr_group = { + .attrs = (struct attribute **)qeth_osn_device_attrs, +}; #define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store) \ struct device_attribute dev_attr_##_id = { \ @@ -1667,7 +1680,12 @@ int qeth_create_device_attributes(struct device *dev) { int ret; + struct qeth_card *card = dev->driver_data; + if (card->info.type == QETH_CARD_TYPE_OSN) + return sysfs_create_group(&dev->kobj, + &qeth_osn_device_attr_group); + if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group))) return ret; if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){ @@ -1693,6 +1711,12 @@ qeth_create_device_attributes(struct device *dev) void qeth_remove_device_attributes(struct device *dev) { + struct qeth_card *card = dev->driver_data; + + if (card->info.type == QETH_CARD_TYPE_OSN) + return sysfs_remove_group(&dev->kobj, + &qeth_osn_device_attr_group); + sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); -- cgit v1.2.3 From 31961943e3110c5a1c36b1e0069c29f7c4380e51 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Fri, 30 Sep 2005 01:36:00 -0400 Subject: [PATCH] libata: Marvell SATA support (DMA mode) (resend: v0.22) This is my libata compatible low level driver for the Marvell SATA family. Currently it runs in DMA mode on a 6081 chip. The 5xxx series parts are not yet DMA capable in this driver because the registers have differences that haven't been accounted for yet. Basically, I'm focused on the 6xxx series right now. I apologize for those seeing problems on the 5xxx series, I've not had a chance to look at those problems yet. For those curious, the previous bug causing the SCSI timeout and subsequent panics was caused by an improper clear of hc_irq_cause in mv_host_intr(). This version is running well in my environment (6081 chips, with/without SW raid1) and is showing equal or better performance compared to the Marvell driver (mv_sata) in my initial tests (timed dd's of reads/writes to/from memory/disk). I still need to look at the causes of occasional problems such as this: ata11: translating stat 0x35 err 0x00 to sense ata11: status=0x35 { DeviceFault SeekComplete CorrectedError Error } SCSI error : <10 0 0 0> return code = 0x8000002 Current sda: sense key Hardware Error end_request: I/O error, dev sda, sector 3155010 and this, seen at init time: ATA: abnormal status 0x80 on port 0xE093911C but they aren't showstoppers. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 938 +++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 749 insertions(+), 189 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ea76fe44585e..ecda7df21142 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.12" +#define DRV_VERSION "0.22" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -55,31 +55,61 @@ enum { MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - MV_Q_CT = 32, - MV_CRQB_SZ = 32, - MV_CRPB_SZ = 8, + MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - MV_DMA_BOUNDARY = 0xffffffffU, - SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)), + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 176, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), + + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */ + /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ MV_PORT_MASK = 3, /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_BDMA = (1 << 28), /* Basic DMA */ + MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ + MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | + MV_FLAG_GLBL_SFT_RST), chip_504x = 0, chip_508x = 1, chip_604x = 2, chip_608x = 3, + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + + EPRD_FLAG_END_OF_TBL = (1 << 31), + /* PCI interface registers */ + PCI_COMMAND_OFS = 0xc00, + PCI_MAIN_CMD_STS_OFS = 0xd30, STOP_PCI_MASTER = (1 << 2), PCI_MASTER_EMPTY = (1 << 3), @@ -111,20 +141,13 @@ enum { HC_CFG_OFS = 0, HC_IRQ_CAUSE_OFS = 0x14, - CRBP_DMA_DONE = (1 << 0), /* shift by port # */ + CRPB_DMA_DONE = (1 << 0), /* shift by port # */ HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ /* Shadow block registers */ - SHD_PIO_DATA_OFS = 0x100, - SHD_FEA_ERR_OFS = 0x104, - SHD_SECT_CNT_OFS = 0x108, - SHD_LBA_L_OFS = 0x10C, - SHD_LBA_M_OFS = 0x110, - SHD_LBA_H_OFS = 0x114, - SHD_DEV_HD_OFS = 0x118, - SHD_CMD_STA_OFS = 0x11C, - SHD_CTL_AST_OFS = 0x120, + SHD_BLK_OFS = 0x100, + SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ @@ -132,6 +155,11 @@ enum { /* Port registers */ EDMA_CFG_OFS = 0, + EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ + EDMA_CFG_NCQ = (1 << 5), + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ EDMA_ERR_IRQ_CAUSE_OFS = 0x8, EDMA_ERR_IRQ_MASK_OFS = 0xc, @@ -161,33 +189,85 @@ enum { EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), + EDMA_REQ_Q_BASE_HI_OFS = 0x10, + EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI_OFS = 0x1c, + EDMA_RSP_Q_IN_PTR_OFS = 0x20, + EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, + EDMA_RSP_Q_PTR_SHIFT = 3, + EDMA_CMD_OFS = 0x28, EDMA_EN = (1 << 0), EDMA_DS = (1 << 1), ATA_RST = (1 << 2), - /* BDMA is 6xxx part only */ - BDMA_CMD_OFS = 0x224, - BDMA_START = (1 << 0), + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), - MV_UNDEF = 0, + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), + MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; -struct mv_port_priv { +/* Command ReQuest Block: 32B */ +struct mv_crqb { + u32 sg_addr; + u32 sg_addr_hi; + u16 ctrl_flags; + u16 ata_cmd[11]; +}; +/* Command ResPonse Block: 8B */ +struct mv_crpb { + u16 id; + u16 flags; + u32 tmstmp; }; -struct mv_host_priv { +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + u32 addr; + u32 flags_size; + u32 addr_hi; + u32 reserved; +}; +struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl; + dma_addr_t sg_tbl_dma; + + unsigned req_producer; /* cp of req_in_ptr */ + unsigned rsp_consumer; /* cp of rsp_out_ptr */ + u32 pp_flags; +}; + +struct mv_host_priv { + u32 hp_flags; }; static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u8 mv_check_err(struct ata_port *ap); static void mv_phy_reset(struct ata_port *ap); -static int mv_master_reset(void __iomem *mmio_base); +static void mv_host_stop(struct ata_host_set *host_set); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static Scsi_Host_Template mv_sht = { @@ -196,13 +276,13 @@ static Scsi_Host_Template mv_sht = { .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .eh_strategy_handler = ata_scsi_error, - .can_queue = ATA_DEF_QUEUE, + .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_UNDEF, + .sg_tablesize = MV_MAX_SG_CT, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, - .use_clustering = MV_UNDEF, + .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, @@ -216,15 +296,16 @@ static struct ata_port_operations mv_ops = { .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, + .check_err = mv_check_err, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .phy_reset = mv_phy_reset, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, - .eng_timeout = ata_eng_timeout, + .eng_timeout = mv_eng_timeout, .irq_handler = mv_interrupt, .irq_clear = mv_irq_clear, @@ -232,46 +313,39 @@ static struct ata_port_operations mv_ops = { .scr_read = mv_scr_read, .scr_write = mv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, }; static struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = MV_COMMON_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | - MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, }; @@ -306,12 +380,6 @@ static inline void writelfl(unsigned long data, void __iomem *addr) (void) readl(addr); /* flush to avoid PCI posted write */ } -static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio) -{ - return ((void __iomem *)((unsigned long)port_mmio & - (unsigned long)SATAHC_MASK)); -} - static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) { return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); @@ -329,24 +397,141 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long flags) +static inline int mv_get_hc_count(unsigned long hp_flags) +{ + return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); +} + +static void mv_irq_clear(struct ata_port *ap) { - return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1); } -static inline int mv_is_edma_active(struct ata_port *ap) +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp, + struct ata_port *ap) { - void __iomem *port_mmio = mv_ap_base(ap); - return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + + spin_unlock_irqrestore(&ap->host_set->lock, flags); } -static inline int mv_port_bdma_capable(struct ata_port *ap) +static void mv_stop_dma(struct ata_port *ap) { - return (ap->flags & MV_FLAG_BDMA); + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + u32 reg; + int i; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (!(MV_PP_FLAG_EDMA_DS_ACT & pp->pp_flags) && + ((MV_PP_FLAG_EDMA_EN & pp->pp_flags) || + (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)))) { + /* Disable EDMA if we're not already trying to disable it + * and it is currently active. The disable bit auto clears. + */ + pp->pp_flags |= MV_PP_FLAG_EDMA_DS_ACT; + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* now properly wait for the eDMA to stop */ + for (i = 1000; i > 0; i--) { + reg = readl(port_mmio + EDMA_CMD_OFS); + if (!(EDMA_EN & reg)) { + break; + } + udelay(100); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_DS_ACT; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (EDMA_EN & reg) { + printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + } } -static void mv_irq_clear(struct ata_port *ap) +static void mv_dump_mem(void __iomem *start, unsigned bytes) { +#ifdef ATA_DEBUG + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ",readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw); + printk("%08x ",dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) +{ +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n",p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n",p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif } static unsigned int mv_scr_offset(unsigned int sc_reg_in) @@ -389,30 +574,29 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -static int mv_master_reset(void __iomem *mmio_base) +/* This routine only applies to 6xxx parts */ +static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; u32 t; - VPRINTK("ENTER\n"); - /* Following procedure defined in PCI "main command and status * register" table. */ t = readl(reg); writel(t | STOP_PCI_MASTER, reg); - for (i = 0; i < 100; i++) { - msleep(10); + for (i = 0; i < 1000; i++) { + udelay(1); t = readl(reg); if (PCI_MASTER_EMPTY & t) { break; } } if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME "PCI master won't flush\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; goto done; } @@ -425,39 +609,311 @@ static int mv_master_reset(void __iomem *mmio_base) } while (!(GLOB_SFT_RST & t) && (i-- > 0)); if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME "can't set global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; goto done; } - /* clear reset */ + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ i = 5; do { - writel(t & ~GLOB_SFT_RST, reg); + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); t = readl(reg); udelay(1); } while ((GLOB_SFT_RST & t) && (i-- > 0)); if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME "can't clear global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; } - - done: - VPRINTK("EXIT, rc = %i\n", rc); +done: return rc; } -static void mv_err_intr(struct ata_port *ap) +static void mv_host_stop(struct ata_host_set *host_set) { - void __iomem *port_mmio; - u32 edma_err_cause, serr = 0; + struct mv_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + if (hpriv->hp_flags & MV_HP_FLAG_MSI) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } + kfree(hpriv); + ata_host_stop(host_set); +} + +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp; + void __iomem *port_mmio = mv_ap_base(ap); + void *mem; + dma_addr_t mem_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + return -ENOMEM; + } + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, MV_PORT_PRIV_DMA_SZ); + + /* First item in chunk of DMA memory: + * 32-slot command request table (CRQB), 32 bytes each in size + */ + pp->crqb = mem; + pp->crqb_dma = mem_dma; + mem += MV_CRQB_Q_SZ; + mem_dma += MV_CRQB_Q_SZ; + + /* Second item: + * 32-slot command response table (CRPB), 8 bytes each in size + */ + pp->crpb = mem; + pp->crpb_dma = mem_dma; + mem += MV_CRPB_Q_SZ; + mem_dma += MV_CRPB_Q_SZ; + + /* Third item: + * Table of scatter-gather descriptors (ePRD), 16 bytes each + */ + pp->sg_tbl = mem; + pp->sg_tbl_dma = mem_dma; + + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); + + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + pp->req_producer = pp->rsp_consumer = 0; + + /* Don't turn on EDMA here...do it before DMA commands only. Else + * we'll be unable to send non-data, PIO, etc due to restricted access + * to shadow regs. + */ + ap->private_data = pp; + return 0; +} + +static void mv_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp = ap->private_data; + + mv_stop_dma(ap); + + ap->private_data = NULL; + dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); + kfree(pp); +} + +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + unsigned int i; + + for (i = 0; i < qc->n_elem; i++) { + u32 sg_len; + dma_addr_t addr; + + addr = sg_dma_address(&qc->sg[i]); + sg_len = sg_dma_len(&qc->sg[i]); + + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); + pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); + } + if (0 < qc->n_elem) { + pp->sg_tbl[qc->n_elem - 1].flags_size |= EPRD_FLAG_END_OF_TBL; + } +} + +static inline unsigned mv_inc_q_index(unsigned *index) +{ + *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK; + return *index; +} + +static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +{ + *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); +} + +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + u16 *cw; + struct ata_taskfile *tf; + u16 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) { + return; + } - /* bug here b/c we got an err int on a port we don't know about, - * so there's no way to clear it + /* the req producer index should be the same as we remember it */ + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + + /* Fill in command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + flags |= CRQB_FLAG_READ; + } + assert(MV_MAX_Q_DEPTH > qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + pp->crqb[pp->req_producer].sg_addr = + cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + pp->crqb[pp->req_producer].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[pp->req_producer].ata_cmd[0]; + tf = &qc->tf; + + /* Sadly, the CRQB cannot accomodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect. */ - BUG_ON(NULL == ap); - port_mmio = mv_ap_base(ap); + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; +#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; +#endif /* FIXME: remove this line when NCQ added */ + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + return; + } + mv_fill_sg(qc); +} + +static int mv_qc_issue(struct ata_queued_cmd *qc) +{ + void __iomem *port_mmio = mv_ap_base(qc->ap); + struct mv_port_priv *pp = qc->ap->private_data; + u32 in_ptr; + + if (ATA_PROT_DMA != qc->tf.protocol) { + /* We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_dma(qc->ap); + return ata_qc_issue_prot(qc); + } + + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + /* the req producer index should be the same as we remember it */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + /* until we do queuing, the queue should be empty at this point */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + mv_inc_q_index(&pp->req_producer); /* now incr producer index */ + + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + /* turn on EDMA if not already on */ + mv_start_dma(port_mmio, pp, qc->ap); + } + assert(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + + /* and write the request in pointer to kick the EDMA to life */ + in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; + in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT; + writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + return 0; +} + +static u8 mv_get_crpb_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 out_ptr; + + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* the response consumer index should be the same as we remember it */ + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* increment our consumer index... */ + pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); + + /* and, until we do NCQ, there should only be 1 CRPB waiting */ + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* write out our inc'd consumer index so EDMA knows we're caught up */ + out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; + out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT; + writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Return ATA status register for completed CRPB */ + return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); +} + +static void mv_err_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 edma_err_cause, serr = 0; edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -477,8 +933,7 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC - */ +/* Handle any outstanding interrupts in a single SATAHC */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) { @@ -487,8 +942,8 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap; struct ata_queued_cmd *qc; u32 hc_irq_cause; - int shift, port, port0, hard_port; - u8 ata_status; + int shift, port, port0, hard_port, handled; + u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -499,7 +954,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); if (hc_irq_cause) { - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); } VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", @@ -508,35 +963,38 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ - ata_status = 0xffU; + handled = 0; /* ensure ata_status is set if handled++ */ - if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) { - BUG_ON(NULL == ap); - /* rcv'd new resp, basic DMA complete, or ATA IRQ */ - /* This is needed to clear the ATA INTRQ. - * FIXME: don't read the status reg in EDMA mode! + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { + /* new CRPB on the queue; just one at a time until NCQ + */ + ata_status = mv_get_crpb_status(ap); + handled++; + } else if ((DEV_IRQ << hard_port) & hc_irq_cause) { + /* received ATA IRQ; read the status reg to clear INTRQ */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr); + handled++; } - shift = port * 2; + shift = port << 1; /* (port * 2) */ if (port >= MV_PORTS_PER_HC) { shift++; /* skip bit 8 in the HC Main IRQ reg */ } if ((PORT0_ERR << shift) & relevant) { mv_err_intr(ap); - /* FIXME: smart to OR in ATA_ERR? */ + /* OR in ATA_ERR to ensure libata knows we took one */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr) | ATA_ERR; + handled++; } - if (ap) { + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); - BUG_ON(0xffU == ata_status); /* mark qc status appropriately */ ata_qc_complete(qc, ata_status); } @@ -550,12 +1008,10 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, { struct ata_host_set *host_set = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio; + void __iomem *mmio = host_set->mmio_base; u32 irq_stat; - mmio = host_set->mmio_base; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); /* check the cases where we either have nothing pending or have read * a bogus register value which can indicate HW removal or PCI fault @@ -564,64 +1020,87 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); spin_lock(&host_set->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { mv_host_intr(host_set, relevant, hc); - handled = 1; + handled++; } } if (PCI_ERR & irq_stat) { - /* FIXME: these are all masked by default, but still need - * to recover from them properly. - */ - } + printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", + readl(mmio + PCI_IRQ_CAUSE_OFS)); + + VPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + handled++; + } spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } +static u8 mv_check_err(struct ata_port *ap) +{ + mv_stop_dma(ap); /* can't read shadow regs if DMA on */ + return readb((void __iomem *) ap->ioaddr.error_addr); +} + +/* Part of this is taken from __sata_phy_reset and modified to not sleep + * since this routine gets called from interrupt level. + */ static void mv_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; - u32 edma = 0, bdma; + unsigned long timeout; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - edma = readl(port_mmio + EDMA_CMD_OFS); - if (EDMA_EN & edma) { - /* disable EDMA if active */ - edma &= ~EDMA_EN; - writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS); - udelay(1); - } else if (mv_port_bdma_capable(ap) && - (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) { - /* disable BDMA if active */ - writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS); - } + mv_stop_dma(ap); - writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); udelay(25); /* allow reset propagation */ /* Spec never mentions clearing the bit. Marvell's driver does * clear the bit, however. */ - writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("Done. Now calling __sata_phy_reset()\n"); + VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); /* proceed to init communications via the scr_control reg */ - __sata_phy_reset(ap); + scr_write_flush(ap, SCR_CONTROL, 0x301); + mdelay(1); + scr_write_flush(ap, SCR_CONTROL, 0x300); + timeout = jiffies + (HZ * 1); + do { + mdelay(10); + if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); - if (ap->flags & ATA_FLAG_PORT_DISABLED) { - VPRINTK("Port disabled pre-sig. Exiting.\n"); + VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); + + if (sata_dev_present(ap)) { + ata_port_probe(ap); + } else { + printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", + ap->id, scr_read(ap, SCR_STATUS)); + ata_port_disable(ap); return; } + ap->cbl = ATA_CBL_SATA; tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); @@ -636,28 +1115,76 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } -static void mv_port_init(struct ata_ioports *port, unsigned long base) +static void mv_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + + printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + DPRINTK("All regs @ start of eng_timeout\n"); + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + to_pci_dev(ap->host_set->dev)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", + ap->host_set->mmio_base, ap, qc, qc->scsicmd, + &qc->scsicmd->cmnd); + + mv_err_intr(ap); + mv_phy_reset(ap); + + if (!qc) { + printk(KERN_ERR "ata%u: BUG: timeout without command\n", + ap->id); + } else { + /* hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } +} + +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { - /* PIO related setup */ - port->data_addr = base + SHD_PIO_DATA_OFS; - port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS; - port->nsect_addr = base + SHD_SECT_CNT_OFS; - port->lbal_addr = base + SHD_LBA_L_OFS; - port->lbam_addr = base + SHD_LBA_M_OFS; - port->lbah_addr = base + SHD_LBA_H_OFS; - port->device_addr = base + SHD_DEV_HD_OFS; - port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS; - port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS; - /* unused */ + unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; + unsigned serr_ofs; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + + /* unused: */ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + /* Clear any currently outstanding port interrupt conditions */ + serr_ofs = mv_scr_offset(SCR_ERROR); + writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + /* unmask all EDMA error interrupts */ - writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS); + writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl((void __iomem *)base + EDMA_CFG_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS)); + readl(port_mmio + EDMA_CFG_OFS), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), + readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } static int mv_host_init(struct ata_probe_ent *probe_ent) @@ -666,7 +1193,8 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; - if (mv_master_reset(probe_ent->mmio_base)) { + if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && + mv_global_soft_reset(probe_ent->mmio_base)) { rc = 1; goto done; } @@ -676,17 +1204,27 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio); + mv_port_init(&probe_ent->port[port], port_mmio); } for (hc = 0; hc < n_hc; hc++) { - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc, - readl(mv_hc_base(mmio, hc) + HC_CFG_OFS), - readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS)); + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG_OFS), + readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + + /* and unmask interrupt generation for host regs */ + writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " "PCI int cause/mask=0x%08x/0x%08x\n", @@ -694,11 +1232,37 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); - - done: +done: return rc; } +/* FIXME: complete this */ +static void mv_print_info(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct mv_host_priv *hpriv = probe_ent->private_data; + u8 rev_id, scc; + const char *scc_s; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "unknown"; + + printk(KERN_INFO DRV_NAME + "(%s) %u slots %u ports %s mode IRQ via %s\n", + pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -706,16 +1270,12 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct mv_host_priv *hpriv; unsigned int board_idx = (unsigned int)ent->driver_data; void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; + int pci_dev_busy = 0, rc; if (!printed_version++) { - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n"); } - VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number, - PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); - rc = pci_enable_device(pdev); if (rc) { return rc; @@ -727,8 +1287,6 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out; } - pci_intx(pdev, 1); - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; @@ -739,8 +1297,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR), - pci_resource_len(pdev, MV_PRIMARY_BAR)); + mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -769,37 +1326,40 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_out_hpriv; } -/* mv_print_info(probe_ent); */ - { - int b, w; - u32 dw[4]; /* hold a line of 16b */ - VPRINTK("PCI config space:\n"); - for (b = 0; b < 0x40; ) { - for (w = 0; w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw[w]); - b += sizeof(*dw); - } - VPRINTK("%08x %08x %08x %08x\n", - dw[0],dw[1],dw[2],dw[3]); - } + /* Enable interrupts */ + if (pci_enable_msi(pdev) == 0) { + hpriv->hp_flags |= MV_HP_FLAG_MSI; + } else { + pci_intx(pdev, 1); } - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(probe_ent); + + if (ata_device_add(probe_ent) == 0) { + rc = -ENODEV; /* No devices discovered */ + goto err_out_dev_add; + } + kfree(probe_ent); return 0; - err_out_hpriv: +err_out_dev_add: + if (MV_HP_FLAG_MSI & hpriv->hp_flags) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } +err_out_hpriv: kfree(hpriv); - err_out_iounmap: - iounmap(mmio_base); - err_out_free_ent: +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: kfree(probe_ent); - err_out_regions: +err_out_regions: pci_release_regions(pdev); - err_out: +err_out: if (!pci_dev_busy) { pci_disable_device(pdev); } -- cgit v1.2.3 From cc6e7c44f4b8ab13acf5521cd4b312848122179f Mon Sep 17 00:00:00 2001 From: Ravinandan Arakali Date: Tue, 4 Oct 2005 06:41:24 -0400 Subject: [PATCH] S2io: MSI/MSI-X support (runtime configurable) This patch adds support for MSI/MSI-X feature to the driver. It is a runtime parameter(for now, loadable parameter). Default is INTA. Patch has been tested on IA64 platform with Xframe II adapter, both of which support MSI-X feature. An improvement of about 7% in throughput(both Tx and Rx) was observed and a reduction by 7% in CPU utilization during Tx test. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 543 +++++++++++++++++++++++++++++++++++++++++++++++++---- drivers/net/s2io.h | 50 ++++- 2 files changed, 556 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index dd451e099a4c..4b9f1828845e 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.8.1"; +static char s2io_driver_version[] = "Version 2.0.9.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -307,6 +307,8 @@ static unsigned int indicate_max_pkts; #endif /* Frequency of Rx desc syncs expressed as power of 2 */ static unsigned int rxsync_frequency = 3; +/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */ +static unsigned int intr_type = 0; /* * S2IO device table. @@ -1396,8 +1398,13 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->rti_data1_mem); val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | - RTI_DATA2_MEM_RX_UFC_B(0x2) | - RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); + RTI_DATA2_MEM_RX_UFC_B(0x2) ; + if (nic->intr_type == MSI_X) + val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \ + RTI_DATA2_MEM_RX_UFC_D(0x40)); + else + val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \ + RTI_DATA2_MEM_RX_UFC_D(0x80)); writeq(val64, &bar0->rti_data2_mem); for (i = 0; i < config->rx_ring_num; i++) { @@ -1507,17 +1514,15 @@ static int init_nic(struct s2io_nic *nic) #define LINK_UP_DOWN_INTERRUPT 1 #define MAC_RMAC_ERR_TIMER 2 -#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE) -#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER -#else int s2io_link_fault_indication(nic_t *nic) { + if (nic->intr_type != INTA) + return MAC_RMAC_ERR_TIMER; if (nic->device_type == XFRAME_II_DEVICE) return LINK_UP_DOWN_INTERRUPT; else return MAC_RMAC_ERR_TIMER; } -#endif /** * en_dis_able_nic_intrs - Enable or Disable the interrupts @@ -1941,11 +1946,14 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR | RX_PIC_INTR; - interruptible |= TX_MAC_INTR | RX_MAC_INTR; - - en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); + if (nic->intr_type != INTA) + en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS); + else { + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); + } /* * With some switches, link might be already up at this point. @@ -2633,11 +2641,11 @@ static void tx_intr_handler(fifo_info_t *fifo_data) err = txdlp->Control_1 & TXD_T_CODE; if ((err >> 48) == 0xA) { DBG_PRINT(TX_DBG, "TxD returned due \ - to loss of link\n"); +to loss of link\n"); } else { DBG_PRINT(ERR_DBG, "***TxD error \ - %llx\n", err); +%llx\n", err); } } @@ -2854,6 +2862,9 @@ void s2io_reset(nic_t * sp) /* Set swapper to enable I/O register access */ s2io_set_swapper(sp); + /* Restore the MSIX table entries from local variables */ + restore_xmsi_data(sp); + /* Clear certain PCI/PCI-X fields after reset */ if (sp->device_type == XFRAME_II_DEVICE) { /* Clear parity err detect bit */ @@ -2983,8 +2994,9 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXD_W_FE | SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_XMSI_SE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); + if (nic->intr_type == INTA) + val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #else /* @@ -3005,8 +3017,9 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXD_W_SE | SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_XMSI_SE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); + if (sp->intr_type == INTA) + val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #endif val64 = readq(&bar0->swapper_ctrl); @@ -3028,6 +3041,201 @@ int s2io_set_swapper(nic_t * sp) return SUCCESS; } +int wait_for_msix_trans(nic_t *nic, int i) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int ret = 0, cnt = 0; + + do { + val64 = readq(&bar0->xmsi_access); + if (!(val64 & BIT(15))) + break; + mdelay(1); + cnt++; + } while(cnt < 5); + if (cnt == 5) { + DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); + ret = 1; + } + + return ret; +} + +void restore_xmsi_data(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int i; + + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + writeq(nic->msix_info[i].addr, &bar0->xmsi_address); + writeq(nic->msix_info[i].data, &bar0->xmsi_data); + val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6)); + writeq(val64, &bar0->xmsi_access); + if (wait_for_msix_trans(nic, i)) { + DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); + continue; + } + } +} + +void store_xmsi_data(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64, addr, data; + int i; + + /* Store and display */ + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + val64 = (BIT(15) | vBIT(i, 26, 6)); + writeq(val64, &bar0->xmsi_access); + if (wait_for_msix_trans(nic, i)) { + DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); + continue; + } + addr = readq(&bar0->xmsi_address); + data = readq(&bar0->xmsi_data); + if (addr && data) { + nic->msix_info[i].addr = addr; + nic->msix_info[i].data = data; + } + } +} + +int s2io_enable_msi(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u16 msi_ctrl, msg_val; + struct config_param *config = &nic->config; + struct net_device *dev = nic->dev; + u64 val64, tx_mat, rx_mat; + int i, err; + + val64 = readq(&bar0->pic_control); + val64 &= ~BIT(1); + writeq(val64, &bar0->pic_control); + + err = pci_enable_msi(nic->pdev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n", + nic->dev->name); + return err; + } + + /* + * Enable MSI and use MSI-1 in stead of the standard MSI-0 + * for interrupt handling. + */ + pci_read_config_word(nic->pdev, 0x4c, &msg_val); + msg_val ^= 0x1; + pci_write_config_word(nic->pdev, 0x4c, msg_val); + pci_read_config_word(nic->pdev, 0x4c, &msg_val); + + pci_read_config_word(nic->pdev, 0x42, &msi_ctrl); + msi_ctrl |= 0x10; + pci_write_config_word(nic->pdev, 0x42, msi_ctrl); + + /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */ + tx_mat = readq(&bar0->tx_mat0_n[0]); + for (i=0; itx_fifo_num; i++) { + tx_mat |= TX_MAT_SET(i, 1); + } + writeq(tx_mat, &bar0->tx_mat0_n[0]); + + rx_mat = readq(&bar0->rx_mat); + for (i=0; irx_ring_num; i++) { + rx_mat |= RX_MAT_SET(i, 1); + } + writeq(rx_mat, &bar0->rx_mat); + + dev->irq = nic->pdev->irq; + return 0; +} + +int s2io_enable_msi_x(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 tx_mat, rx_mat; + u16 msi_control; /* Temp variable */ + int ret, i, j, msix_indx = 1; + + nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry), + GFP_KERNEL); + if (nic->entries == NULL) { + DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__); + return -ENOMEM; + } + memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + + nic->s2io_entries = + kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry), + GFP_KERNEL); + if (nic->s2io_entries == NULL) { + DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__); + kfree(nic->entries); + return -ENOMEM; + } + memset(nic->s2io_entries, 0, + MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + nic->entries[i].entry = i; + nic->s2io_entries[i].entry = i; + nic->s2io_entries[i].arg = NULL; + nic->s2io_entries[i].in_use = 0; + } + + tx_mat = readq(&bar0->tx_mat0_n[0]); + for (i=0; iconfig.tx_fifo_num; i++, msix_indx++) { + tx_mat |= TX_MAT_SET(i, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i]; + nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(tx_mat, &bar0->tx_mat0_n[0]); + + if (!nic->config.bimodal) { + rx_mat = readq(&bar0->rx_mat); + for (j=0; jconfig.rx_ring_num; j++, msix_indx++) { + rx_mat |= RX_MAT_SET(j, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(rx_mat, &bar0->rx_mat); + } else { + tx_mat = readq(&bar0->tx_mat0_n[7]); + for (j=0; jconfig.rx_ring_num; j++, msix_indx++) { + tx_mat |= TX_MAT_SET(i, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(tx_mat, &bar0->tx_mat0_n[7]); + } + + ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name); + kfree(nic->entries); + kfree(nic->s2io_entries); + nic->entries = NULL; + nic->s2io_entries = NULL; + return -ENOMEM; + } + + /* + * To enable MSI-X, MSI also needs to be enabled, due to a bug + * in the herc NIC. (Temp change, needs to be removed later) + */ + pci_read_config_word(nic->pdev, 0x42, &msi_control); + msi_control |= 0x1; /* Enable MSI */ + pci_write_config_word(nic->pdev, 0x42, msi_control); + + return 0; +} + /* ********************************************************* * * Functions defined below concern the OS part of the driver * * ********************************************************* */ @@ -3048,6 +3256,8 @@ int s2io_open(struct net_device *dev) { nic_t *sp = dev->priv; int err = 0; + int i; + u16 msi_control; /* Temp variable */ /* * Make sure you have link off by default every time @@ -3064,13 +3274,55 @@ int s2io_open(struct net_device *dev) goto hw_init_failed; } + /* Store the values of the MSIX table in the nic_t structure */ + store_xmsi_data(sp); + /* After proper initialization of H/W, register ISR */ - err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, - sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", - dev->name); - goto isr_registration_failed; + if (sp->intr_type == MSI) { + err = request_irq((int) sp->pdev->irq, s2io_msi_handle, + SA_SHIRQ, sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: MSI registration \ +failed\n", dev->name); + goto isr_registration_failed; + } + } + if (sp->intr_type == MSI_X) { + for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { + sprintf(sp->desc1, "%s:MSI-X-%d-TX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, sp->desc1, + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, + sp->msix_info[i].addr); + } else { + sprintf(sp->desc2, "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, sp->desc2, + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, + sp->msix_info[i].addr); + } + if (err) { + DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ +failed\n", dev->name, i); + DBG_PRINT(ERR_DBG, "Returned: %d\n", err); + goto isr_registration_failed; + } + sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + } + } + if (sp->intr_type == INTA) { + err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, + sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", + dev->name); + goto isr_registration_failed; + } } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { @@ -3083,11 +3335,37 @@ int s2io_open(struct net_device *dev) return 0; setting_mac_address_failed: - free_irq(sp->pdev->irq, dev); + if (sp->intr_type != MSI_X) + free_irq(sp->pdev->irq, dev); isr_registration_failed: del_timer_sync(&sp->alarm_timer); + if (sp->intr_type == MSI_X) { + if (sp->device_type == XFRAME_II_DEVICE) { + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_disable_msix(sp->pdev); + + /* Temp */ + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + } + } + else if (sp->intr_type == MSI) + pci_disable_msi(sp->pdev); s2io_reset(sp); hw_init_failed: + if (sp->intr_type == MSI_X) { + if (sp->entries) + kfree(sp->entries); + if (sp->s2io_entries) + kfree(sp->s2io_entries); + } return err; } @@ -3107,12 +3385,35 @@ hw_init_failed: int s2io_close(struct net_device *dev) { nic_t *sp = dev->priv; + int i; + u16 msi_control; + flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ s2io_card_down(sp); - free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI_X) { + if (sp->device_type == XFRAME_II_DEVICE) { + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + + pci_disable_msix(sp->pdev); + } + } + else { + free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI) + pci_disable_msi(sp->pdev); + } sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; } @@ -3278,6 +3579,104 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } +static irqreturn_t +s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + nic_t *sp = dev->priv; + int i; + int ret; + mac_info_t *mac_control; + struct config_param *config; + + atomic_inc(&sp->isr_cnt); + mac_control = &sp->mac_control; + config = &sp->config; + DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__); + + /* If Intr is because of Rx Traffic */ + for (i = 0; i < config->rx_ring_num; i++) + rx_intr_handler(&mac_control->rings[i]); + + /* If Intr is because of Tx Traffic */ + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + + /* + * If the Rx buffer count is below the panic threshold then + * reallocate the buffers from the interrupt handler itself, + * else schedule a tasklet to reallocate the buffers. + */ + for (i = 0; i < config->rx_ring_num; i++) { + int rxb_size = atomic_read(&sp->rx_bufs_left[i]); + int level = rx_buffer_level(sp, rxb_size, i); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "%s:Out of memory", + dev->name); + DBG_PRINT(ERR_DBG, " in ISR!!\n"); + clear_bit(0, (&sp->tasklet_status)); + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) { + tasklet_schedule(&sp->task); + } + } + + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; +} + +static irqreturn_t +s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + ring_info_t *ring = (ring_info_t *)dev_id; + nic_t *sp = ring->nic; + int rxb_size, level, rng_n; + + atomic_inc(&sp->isr_cnt); + rx_intr_handler(ring); + + rng_n = ring->ring_no; + rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]); + level = rx_buffer_level(sp, rxb_size, rng_n); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + int ret; + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "Out of memory in %s", + __FUNCTION__); + clear_bit(0, (&sp->tasklet_status)); + return IRQ_HANDLED; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) { + tasklet_schedule(&sp->task); + } + atomic_dec(&sp->isr_cnt); + + return IRQ_HANDLED; +} + +static irqreturn_t +s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + fifo_info_t *fifo = (fifo_info_t *)dev_id; + nic_t *sp = fifo->nic; + + atomic_inc(&sp->isr_cnt); + tx_intr_handler(fifo); + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; +} + static void s2io_txpic_intr_handle(nic_t *sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; @@ -4932,7 +5331,7 @@ static void s2io_card_down(nic_t * sp) static int s2io_card_up(nic_t * sp) { - int i, ret; + int i, ret = 0; mac_info_t *mac_control; struct config_param *config; struct net_device *dev = (struct net_device *) sp->dev; @@ -4944,6 +5343,15 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } + if (sp->intr_type == MSI) + ret = s2io_enable_msi(sp); + else if (sp->intr_type == MSI_X) + ret = s2io_enable_msi_x(sp); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); + sp->intr_type = INTA; + } + /* * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks @@ -5245,6 +5653,7 @@ module_param(bimodal, bool, 0); module_param(indicate_max_pkts, int, 0); #endif module_param(rxsync_frequency, int, 0); +module_param(intr_type, int, 0); /** * s2io_init_nic - Initialization of the adapter . @@ -5274,9 +5683,16 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mac_info_t *mac_control; struct config_param *config; int mode; + u8 dev_intr_type = intr_type; #ifdef CONFIG_S2IO_NAPI - DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); + if (dev_intr_type != INTA) { + DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \ +is enabled. Defaulting to INTA\n"); + dev_intr_type = INTA; + } + else + DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); #endif if ((ret = pci_enable_device(pdev))) { @@ -5303,10 +5719,35 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) return -ENOMEM; } - if (pci_request_regions(pdev, s2io_driver_name)) { - DBG_PRINT(ERR_DBG, "Request Regions failed\n"), - pci_disable_device(pdev); - return -ENODEV; + if ((dev_intr_type == MSI_X) && + ((pdev->device != PCI_DEVICE_ID_HERC_WIN) && + (pdev->device != PCI_DEVICE_ID_HERC_UNI))) { + DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \ +Defaulting to INTA\n"); + dev_intr_type = INTA; + } + if (dev_intr_type != MSI_X) { + if (pci_request_regions(pdev, s2io_driver_name)) { + DBG_PRINT(ERR_DBG, "Request Regions failed\n"), + pci_disable_device(pdev); + return -ENODEV; + } + } + else { + if (!(request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), s2io_driver_name))) { + DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n"); + pci_disable_device(pdev); + return -ENODEV; + } + if (!(request_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2), s2io_driver_name))) { + DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n"); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); + return -ENODEV; + } } dev = alloc_etherdev(sizeof(nic_t)); @@ -5329,6 +5770,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->pdev = pdev; sp->high_dma_flag = dma_flag; sp->device_enabled_once = FALSE; + sp->intr_type = dev_intr_type; if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || (pdev->device == PCI_DEVICE_ID_HERC_UNI)) @@ -5336,6 +5778,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) else sp->device_type = XFRAME_I_DEVICE; + /* Initialize some PCI/PCI-X fields of the NIC. */ s2io_init_pci(sp); @@ -5577,6 +6020,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifdef CONFIG_2BUFF_MODE DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); #endif + switch(sp->intr_type) { + case INTA: + DBG_PRINT(ERR_DBG, ", Intr type INTA"); + break; + case MSI: + DBG_PRINT(ERR_DBG, ", Intr type MSI"); + break; + case MSI_X: + DBG_PRINT(ERR_DBG, ", Intr type MSI-X"); + break; + } DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", @@ -5601,6 +6055,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifdef CONFIG_2BUFF_MODE DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); #endif + switch(sp->intr_type) { + case INTA: + DBG_PRINT(ERR_DBG, ", Intr type INTA"); + break; + case MSI: + DBG_PRINT(ERR_DBG, ", Intr type MSI"); + break; + case MSI_X: + DBG_PRINT(ERR_DBG, ", Intr type MSI-X"); + break; + } DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], @@ -5644,7 +6109,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mem_alloc_failed: free_shared_mem(sp); pci_disable_device(pdev); - pci_release_regions(pdev); + if (dev_intr_type != MSI_X) + pci_release_regions(pdev); + else { + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + release_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + } pci_set_drvdata(pdev, NULL); free_netdev(dev); @@ -5678,7 +6150,14 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) iounmap(sp->bar0); iounmap(sp->bar1); pci_disable_device(pdev); - pci_release_regions(pdev); + if (sp->intr_type != MSI_X) + pci_release_regions(pdev); + else { + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + release_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + } pci_set_drvdata(pdev, NULL); free_netdev(dev); } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 89151cb52181..1cc24b56760e 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -652,6 +652,30 @@ typedef struct { #define SMALL_BLK_CNT 30 #define LARGE_BLK_CNT 100 +/* + * Structure to keep track of the MSI-X vectors and the corresponding + * argument registered against each vector + */ +#define MAX_REQUESTED_MSI_X 17 +struct s2io_msix_entry +{ + u16 vector; + u16 entry; + void *arg; + + u8 type; +#define MSIX_FIFO_TYPE 1 +#define MSIX_RING_TYPE 2 + + u8 in_use; +#define MSIX_REGISTERED_SUCCESS 0xAA +}; + +struct msix_info_st { + u64 addr; + u64 data; +}; + /* Structure representing one instance of the NIC */ struct s2io_nic { #ifdef CONFIG_S2IO_NAPI @@ -719,13 +743,8 @@ struct s2io_nic { * a schedule task that will set the correct Link state once the * NIC's PHY has stabilized after a state change. */ -#ifdef INIT_TQUEUE - struct tq_struct rst_timer_task; - struct tq_struct set_link_task; -#else struct work_struct rst_timer_task; struct work_struct set_link_task; -#endif /* Flag that can be used to turn on or turn off the Rx checksum * offload feature. @@ -748,10 +767,23 @@ struct s2io_nic { atomic_t card_state; volatile unsigned long link_state; struct vlan_group *vlgrp; +#define MSIX_FLG 0xA5 + struct msix_entry *entries; + struct s2io_msix_entry *s2io_entries; + char desc1[35]; + char desc2[35]; + + struct msix_info_st msix_info[0x3f]; + #define XFRAME_I_DEVICE 1 #define XFRAME_II_DEVICE 2 u8 device_type; +#define INTA 0 +#define MSI 1 +#define MSI_X 2 + u8 intr_type; + spinlock_t rx_lock; atomic_t isr_cnt; }; @@ -886,6 +918,13 @@ static int s2io_poll(struct net_device *dev, int *budget); static void s2io_init_pci(nic_t * sp); int s2io_set_mac_addr(struct net_device *dev, u8 * addr); static void s2io_alarm_handle(unsigned long data); +static int s2io_enable_msi(nic_t *nic); +static irqreturn_t s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t +s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t +s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs); +int s2io_enable_msi_x(nic_t *nic); static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; @@ -894,4 +933,5 @@ int s2io_set_swapper(nic_t * sp); static void s2io_card_down(nic_t *nic); static int s2io_card_up(nic_t *nic); int get_xena_rev_id(struct pci_dev *pdev); +void restore_xmsi_data(nic_t *nic); #endif /* _S2IO_H */ -- cgit v1.2.3 From 868d5309942927dc86f57009420c5d366ec05daa Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 06:58:59 -0400 Subject: e1000: Support for 82571 and 82572 controllers Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 9 +- drivers/net/e1000/e1000_hw.c | 219 ++++++++++++++++++++++++++++++++------ drivers/net/e1000/e1000_hw.h | 96 ++++++++++++++--- drivers/net/e1000/e1000_main.c | 102 ++++++++++++++++-- 4 files changed, 372 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8f3a13420278..5f9a36bb77f5 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -696,6 +696,11 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) * Some bits that get toggled are ignored. */ switch (adapter->hw.mac_type) { + /* there are several bits on newer hardware that are r/w */ + case e1000_82571: + case e1000_82572: + toggle = 0x7FFFF3FF; + break; case e1000_82573: toggle = 0x7FFFF033; break; @@ -1245,6 +1250,8 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: + case e1000_82571: + case e1000_82572: case e1000_82573: return e1000_integrated_phy_loopback(adapter); break; @@ -1625,7 +1632,7 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); - if(adapter->hw.mac_type < e1000_82573) { + if(adapter->hw.mac_type < e1000_82571) { if(!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 045f5426ab9a..7d627dd89a3d 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -83,14 +83,14 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = static const uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = - { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, - 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, - 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, - 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, - 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, - 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, - 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, - 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, + 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, + 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, + 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, + 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, + 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, + 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, + 104, 109, 114, 118, 121, 124}; /****************************************************************************** @@ -286,7 +286,6 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: - case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -305,8 +304,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82571EB_COPPER: + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82571EB_SERDES: + hw->mac_type = e1000_82571; + break; + case E1000_DEV_ID_82572EI_COPPER: + case E1000_DEV_ID_82572EI_FIBER: + case E1000_DEV_ID_82572EI_SERDES: + hw->mac_type = e1000_82572; + break; case E1000_DEV_ID_82573E: case E1000_DEV_ID_82573E_IAMT: + case E1000_DEV_ID_82573L: hw->mac_type = e1000_82573; break; default: @@ -315,6 +325,8 @@ e1000_set_mac_type(struct e1000_hw *hw) } switch(hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: hw->eeprom_semaphore_present = TRUE; /* fall through */ @@ -351,6 +363,8 @@ e1000_set_media_type(struct e1000_hw *hw) switch (hw->device_id) { case E1000_DEV_ID_82545GM_SERDES: case E1000_DEV_ID_82546GB_SERDES: + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82572EI_SERDES: hw->media_type = e1000_media_type_internal_serdes; break; default: @@ -523,6 +537,8 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); /* fall through */ + case e1000_82571: + case e1000_82572: ret_val = e1000_get_auto_rd_done(hw); if(ret_val) /* We don't want to continue accessing MAC registers. */ @@ -683,6 +699,9 @@ e1000_init_hw(struct e1000_hw *hw) switch (hw->mac_type) { default: break; + case e1000_82571: + case e1000_82572: + ctrl |= (1 << 22); case e1000_82573: ctrl |= E1000_TXDCTL_COUNT_DESC; break; @@ -694,6 +713,25 @@ e1000_init_hw(struct e1000_hw *hw) e1000_enable_tx_pkt_filtering(hw); } + switch (hw->mac_type) { + default: + break; + case e1000_82571: + ctrl = E1000_READ_REG(hw, TXDCTL1); + ctrl &= ~E1000_TXDCTL_WTHRESH; + ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB; + ctrl |= (1 << 22); + E1000_WRITE_REG(hw, TXDCTL1, ctrl); + break; + } + + + + if (hw->mac_type == e1000_82573) { + uint32_t gcr = E1000_READ_REG(hw, GCR); + gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + E1000_WRITE_REG(hw, GCR, gcr); + } /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link @@ -878,6 +916,14 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_fiber_serdes_link"); + /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists + * until explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) + E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); + /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -2943,6 +2989,8 @@ e1000_phy_reset(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_82541_rev_2: + case e1000_82571: + case e1000_82572: ret_val = e1000_phy_hw_reset(hw); if(ret_val) return ret_val; @@ -2981,6 +3029,16 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + /* The 82571 firmware may still be configuring the PHY. In this + * case, we cannot access the PHY until the configuration is done. So + * we explicitly set the PHY values. */ + if(hw->mac_type == e1000_82571 || + hw->mac_type == e1000_82572) { + hw->phy_id = IGP01E1000_I_PHY_ID; + hw->phy_type = e1000_phy_igp_2; + return E1000_SUCCESS; + } + /* Read the PHY ID Registers to identify which PHY is onboard. */ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); if(ret_val) @@ -3334,6 +3392,21 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eerd = FALSE; eeprom->use_eewr = FALSE; break; + case e1000_82571: + case e1000_82572: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; case e1000_82573: eeprom->type = e1000_eeprom_spi; eeprom->opcode_bits = 8; @@ -3543,25 +3616,26 @@ e1000_acquire_eeprom(struct e1000_hw *hw) eecd = E1000_READ_REG(hw, EECD); if (hw->mac_type != e1000_82573) { - /* Request EEPROM Access */ - if(hw->mac_type > e1000_82544) { - eecd |= E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); - eecd = E1000_READ_REG(hw, EECD); - while((!(eecd & E1000_EECD_GNT)) && - (i < E1000_EEPROM_GRANT_ATTEMPTS)) { - i++; - udelay(5); - eecd = E1000_READ_REG(hw, EECD); - } - if(!(eecd & E1000_EECD_GNT)) { - eecd &= ~E1000_EECD_REQ; + /* Request EEPROM Access */ + if(hw->mac_type > e1000_82544) { + eecd |= E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); - DEBUGOUT("Could not acquire EEPROM grant\n"); - return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + while((!(eecd & E1000_EECD_GNT)) && + (i < E1000_EEPROM_GRANT_ATTEMPTS)) { + i++; + udelay(5); + eecd = E1000_READ_REG(hw, EECD); + } + if(!(eecd & E1000_EECD_GNT)) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, EECD, eecd); + DEBUGOUT("Could not acquire EEPROM grant\n"); + e1000_put_hw_eeprom_semaphore(hw); + return -E1000_ERR_EEPROM; + } } } - } /* Setup EEPROM for Read/Write */ @@ -4064,7 +4138,7 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* 82573 reads only through eerd */ + /* 82573 writes only through eewr */ if(eeprom->use_eewr == TRUE) return e1000_write_eeprom_eewr(hw, offset, words, data); @@ -4353,9 +4427,16 @@ e1000_read_mac_addr(struct e1000_hw * hw) hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF); hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8); } - if(((hw->mac_type == e1000_82546) || (hw->mac_type == e1000_82546_rev_3)) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) + switch (hw->mac_type) { + default: + break; + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82571: + if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) hw->perm_mac_addr[5] ^= 0x01; + break; + } for(i = 0; i < NODE_ADDRESS_SIZE; i++) hw->mac_addr[i] = hw->perm_mac_addr[i]; @@ -4385,6 +4466,12 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); rar_num = E1000_RAR_ENTRIES; + + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + rar_num -= 1; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); for(i = 1; i < rar_num; i++) { @@ -4427,6 +4514,12 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); num_rar_entry = E1000_RAR_ENTRIES; + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + num_rar_entry -= 1; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -4984,7 +5077,6 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, ICTXQEC); temp = E1000_READ_REG(hw, ICTXQMTC); temp = E1000_READ_REG(hw, ICRXDMTC); - } /****************************************************************************** @@ -5151,6 +5243,8 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: + case e1000_82572: case e1000_82573: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; @@ -5250,6 +5344,7 @@ e1000_get_cable_length(struct e1000_hw *hw, int32_t ret_val; uint16_t agc_value = 0; uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + uint16_t max_agc = 0; uint16_t i, phy_data; uint16_t cable_length; @@ -5338,6 +5433,40 @@ e1000_get_cable_length(struct e1000_hw *hw, IGP01E1000_AGC_RANGE) : 0; *max_length = e1000_igp_cable_length_table[agc_value] + IGP01E1000_AGC_RANGE; + } else if (hw->phy_type == e1000_phy_igp_2) { + uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = + {IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D}; + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of course and + * fine gain values. The result is a number that can be put into + * the lookup table to obtain the approximate cable length. */ + cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc]) + min_agc = cur_agc; + if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc]) + max_agc = cur_agc; + + agc_value += e1000_igp_2_cable_length_table[cur_agc]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0; + *max_length = agc_value + IGP02E1000_AGC_RANGE; } return E1000_SUCCESS; @@ -6465,6 +6594,8 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) default: msec_delay(5); break; + case e1000_82571: + case e1000_82572: case e1000_82573: while(timeout) { if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; @@ -6494,10 +6625,31 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw) { + int32_t timeout = PHY_CFG_TIMEOUT; + uint32_t cfg_mask = E1000_EEPROM_CFG_DONE; + DEBUGFUNC("e1000_get_phy_cfg_done"); - /* Simply wait for 10ms */ - msec_delay(10); + switch (hw->mac_type) { + default: + msec_delay(10); + break; + case e1000_82571: + case e1000_82572: + while (timeout) { + if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) + break; + else + msec_delay(1); + timeout--; + } + + if (!timeout) { + DEBUGOUT("MNG configuration cycle has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } return E1000_SUCCESS; } @@ -6569,8 +6721,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) return; swsm = E1000_READ_REG(hw, SWSM); - /* Release both semaphores. */ - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); } @@ -6606,6 +6757,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * if this is the case. We read FWSM to determine the manageability mode. */ switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: fwsm = E1000_READ_REG(hw, FWSM); if((fwsm & E1000_FWSM_MODE_MASK) != 0) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 51c2b3a18b6f..4f2c196dc314 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -57,6 +57,8 @@ typedef enum { e1000_82541_rev_2, e1000_82547, e1000_82547_rev_2, + e1000_82571, + e1000_82572, e1000_82573, e1000_num_macs } e1000_mac_type; @@ -478,10 +480,16 @@ uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_SERDES 0x107B #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82571EB_COPPER 0x105E +#define E1000_DEV_ID_82571EB_FIBER 0x105F +#define E1000_DEV_ID_82571EB_SERDES 0x1060 +#define E1000_DEV_ID_82572EI_COPPER 0x107D +#define E1000_DEV_ID_82572EI_FIBER 0x107E +#define E1000_DEV_ID_82572EI_SERDES 0x107F #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C +#define E1000_DEV_ID_82573L 0x109A -#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -833,6 +841,8 @@ struct e1000_ffvt_entry { #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX +#define E1000_DISABLE_SERDES_LOOPBACK 0x0400 + /* Register Set. (82543, 82544) * * Registers are defined to be 32 bits and should be accessed as 32 bit values. @@ -853,6 +863,7 @@ struct e1000_ffvt_entry { #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ @@ -864,6 +875,12 @@ struct e1000_ffvt_entry { #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_RCTL 0x00100 /* RX Control - RW */ +#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ +#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ +#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ +#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ +#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ +#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ @@ -895,6 +912,12 @@ struct e1000_ffvt_entry { #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ +#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ +#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ +#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ +#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ +#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ +#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ @@ -980,15 +1003,15 @@ struct e1000_ffvt_entry { #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ -#define E1000_IAC 0x4100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */ -#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */ -#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */ -#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */ -#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ -#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ -#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ @@ -1018,6 +1041,14 @@ struct e1000_ffvt_entry { #define E1000_FWSM 0x05B54 /* FW Semaphore */ #define E1000_FFLT_DBG 0x05F04 /* Debug Register */ #define E1000_HICR 0x08F00 /* Host Inteface Control */ + +/* RSS registers */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ +#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -1032,6 +1063,7 @@ struct e1000_ffvt_entry { #define E1000_82542_CTRL_EXT E1000_CTRL_EXT #define E1000_82542_FLA E1000_FLA #define E1000_82542_MDIC E1000_MDIC +#define E1000_82542_SCTL E1000_SCTL #define E1000_82542_FCAL E1000_FCAL #define E1000_82542_FCAH E1000_FCAH #define E1000_82542_FCT E1000_FCT @@ -1049,6 +1081,18 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN 0x00118 #define E1000_82542_RDH 0x00120 #define E1000_82542_RDT 0x00128 +#define E1000_82542_RDTR0 E1000_82542_RDTR +#define E1000_82542_RDBAL0 E1000_82542_RDBAL +#define E1000_82542_RDBAH0 E1000_82542_RDBAH +#define E1000_82542_RDLEN0 E1000_82542_RDLEN +#define E1000_82542_RDH0 E1000_82542_RDH +#define E1000_82542_RDT0 E1000_82542_RDT +#define E1000_82542_RDTR1 0x00130 +#define E1000_82542_RDBAL1 0x00138 +#define E1000_82542_RDBAH1 0x0013C +#define E1000_82542_RDLEN1 0x00140 +#define E1000_82542_RDH1 0x00148 +#define E1000_82542_RDT1 0x00150 #define E1000_82542_FCRTH 0x00160 #define E1000_82542_FCRTL 0x00168 #define E1000_82542_FCTTV E1000_FCTTV @@ -1197,6 +1241,13 @@ struct e1000_ffvt_entry { #define E1000_82542_ICRXOC E1000_ICRXOC #define E1000_82542_HICR E1000_HICR +#define E1000_82542_CPUVEC E1000_CPUVEC +#define E1000_82542_MRQC E1000_MRQC +#define E1000_82542_RETA E1000_RETA +#define E1000_82542_RSSRK E1000_RSSRK +#define E1000_82542_RSSIM E1000_RSSIM +#define E1000_82542_RSSIR E1000_RSSIR + /* Statistics counters collected by the MAC */ struct e1000_hw_stats { uint64_t crcerrs; @@ -1336,6 +1387,7 @@ struct e1000_hw { boolean_t serdes_link_down; boolean_t tbi_compatibility_en; boolean_t tbi_compatibility_on; + boolean_t laa_is_present; boolean_t phy_reset_disable; boolean_t fc_send_xon; boolean_t fc_strict_ieee; @@ -1374,6 +1426,7 @@ struct e1000_hw { #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ #define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ @@ -1491,6 +1544,8 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ @@ -1524,6 +1579,7 @@ struct e1000_hw { #define E1000_LEDCTL_LED2_BLINK 0x00800000 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 #define E1000_LEDCTL_LED3_MODE_SHIFT 24 +#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000 #define E1000_LEDCTL_LED3_IVRT 0x40000000 #define E1000_LEDCTL_LED3_BLINK 0x80000000 @@ -1784,6 +1840,16 @@ struct e1000_hw { #define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ +/* Multiple Receive Queue Control */ +#define E1000_MRQC_ENABLE_MASK 0x00000003 +#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 +#define E1000_MRQC_ENABLE_RSS_INT 0x00000004 +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -1928,6 +1994,7 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 #define E1000_GCR_BEM32 0x00400000 +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 #define E1000_FACTPS_LAN0_VALID 0x00000004 @@ -1980,6 +2047,7 @@ struct e1000_host_command_info { /* EEPROM Word Offsets */ #define EEPROM_COMPAT 0x0003 #define EEPROM_ID_LED_SETTINGS 0x0004 +#define EEPROM_VERSION 0x0005 #define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A @@ -1990,6 +2058,8 @@ struct e1000_host_command_info { #define EEPROM_FLASH_VERSION 0x0032 #define EEPROM_CHECKSUM_REG 0x003F +#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ + /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF @@ -2108,6 +2178,8 @@ struct e1000_host_command_info { #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 #define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ @@ -2592,11 +2664,11 @@ struct e1000_host_command_info { /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 -#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128 +#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113 /* The precision error of the cable length is +/- 10 meters */ #define IGP01E1000_AGC_RANGE 10 -#define IGP02E1000_AGC_RANGE 10 +#define IGP02E1000_AGC_RANGE 15 /* IGP01E1000 PCS Initialization register */ /* bits 3:6 in the PCS registers stores the channels polarity */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c062b0ad8262..407abb2c0548 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -398,6 +398,10 @@ e1000_reset(struct e1000_adapter *adapter) case e1000_82547_rev_2: pba = E1000_PBA_30K; break; + case e1000_82571: + case e1000_82572: + pba = E1000_PBA_38K; + break; case e1000_82573: pba = E1000_PBA_12K; break; @@ -475,6 +479,7 @@ e1000_probe(struct pci_dev *pdev, struct net_device *netdev; struct e1000_adapter *adapter; unsigned long mmio_start, mmio_len; + uint32_t ctrl_ext; uint32_t swsm; static int cards_found = 0; @@ -688,6 +693,12 @@ e1000_probe(struct pci_dev *pdev, /* Let firmware know the driver has taken over */ switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -732,6 +743,7 @@ e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + uint32_t ctrl_ext; uint32_t manc, swsm; flush_scheduled_work(); @@ -746,6 +758,12 @@ e1000_remove(struct pci_dev *pdev) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -1236,7 +1254,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter) rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ - if(adapter->hw.mac_type == e1000_82573) { + if(adapter->hw.mac_type >= e1000_82571) { /* We can now specify buffers in 1K increments. * BSIZE and BSEX are ignored in this case. */ rctl |= adapter->rx_buffer_len << 0x11; @@ -1352,7 +1370,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if(adapter->rx_csum == TRUE) { rxcsum |= E1000_RXCSUM_TUOFL; - /* Enable 82573 IPv4 payload checksum for UDP fragments + /* Enable 82571 IPv4 payload checksum for UDP fragments * Must be used in conjunction with packet-split. */ if((adapter->hw.mac_type > e1000_82547_rev_2) && (adapter->rx_ps)) { @@ -1608,6 +1626,22 @@ e1000_set_mac(struct net_device *netdev, void *p) e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0); + /* With 82571 controllers, LAA may be overwritten (with the default) + * due to controller reset from the other port. */ + if (adapter->hw.mac_type == e1000_82571) { + /* activate the work around */ + adapter->hw.laa_is_present = 1; + + /* Hold a copy of the LAA in RAR[14] This is done so that + * between the time RAR[0] gets clobbered and the time it + * gets fixed (in e1000_watchdog), the actual LAA is in one + * of the RARs and no incoming packets directed to this port + * are dropped. Eventaully the LAA will be in RAR[0] and + * RAR[14] */ + e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, + E1000_RAR_ENTRIES - 1); + } + if(adapter->hw.mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); @@ -1633,9 +1667,12 @@ e1000_set_multi(struct net_device *netdev) unsigned long flags; uint32_t rctl; uint32_t hash_value; - int i; + int i, rar_entries = E1000_RAR_ENTRIES; spin_lock_irqsave(&adapter->tx_lock, flags); + /* reserve RAR[14] for LAA over-write work-around */ + if (adapter->hw.mac_type == e1000_82571) + rar_entries--; /* Check for Promiscuous and All Multicast modes */ @@ -1660,11 +1697,12 @@ e1000_set_multi(struct net_device *netdev) /* load the first 14 multicast address into the exact filters 1-14 * RAR 0 is used for the station MAC adddress * if there are not 14 addresses, go ahead and clear the filters + * -- with 82571 controllers only 0-13 entries are filled here */ mc_ptr = netdev->mc_list; - for(i = 1; i < E1000_RAR_ENTRIES; i++) { - if(mc_ptr) { + for(i = 1; i < rar_entries; i++) { + if (mc_ptr) { e1000_rar_set(hw, mc_ptr->dmi_addr, i); mc_ptr = mc_ptr->next; } else { @@ -1848,6 +1886,11 @@ e1000_watchdog_task(struct e1000_adapter *adapter) /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = TRUE; + /* With 82571 controllers, LAA may be overwritten due to controller + * reset from the other port. Set the appropriate LAA in RAR[0] */ + if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present) + e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0); + /* Reset the timer */ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } @@ -2269,6 +2312,27 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) local_irq_restore(flags); return NETDEV_TX_LOCKED; } +#ifdef NETIF_F_TSO + /* TSO Workaround for 82571/2 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data */ + if (skb_shinfo(skb)->tso_size) { + uint8_t hdr_len; + hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); + if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) && + (adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572)) { + unsigned int pull_size; + pull_size = min((unsigned int)4, skb->data_len); + if (!__pskb_pull_tail(skb, pull_size)) { + printk(KERN_ERR "__pskb_pull_tail failed.\n"); + dev_kfree_skb_any(skb); + return -EFAULT; + } + } + } +#endif + if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) e1000_transfer_dhcp_info(adapter, skb); @@ -2310,7 +2374,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. - * 82573 hardware supports TSO capabilities for IPv6 as well... + * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ if(likely(skb->protocol == ntohs(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; @@ -2389,9 +2453,18 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } -#define MAX_STD_JUMBO_FRAME_SIZE 9216 +#define MAX_STD_JUMBO_FRAME_SIZE 9234 /* might want this to be bigger enum check... */ - if (adapter->hw.mac_type == e1000_82573 && + /* 82571 controllers limit jumbo frame size to 10500 bytes */ + if ((adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572) && + max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported " + "on 82571 and 82572 controllers.\n"); + return -EINVAL; + } + + if(adapter->hw.mac_type == e1000_82573 && max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported " "on 82573\n"); @@ -3716,6 +3789,12 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -3738,6 +3817,7 @@ e1000_resume(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t manc, ret_val, swsm; + uint32_t ctrl_ext; pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); @@ -3763,6 +3843,12 @@ e1000_resume(struct pci_dev *pdev) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, -- cgit v1.2.3 From 581d708eb47cccb5f41bc0817e50c9b004011ba8 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:01:55 -0400 Subject: e1000: multi-queue defines/modification to data structures defines/modifies data structures, function prototypes and changes to the driver rendering it capable of handling tx/rx queues Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000.h | 67 +++- drivers/net/e1000/e1000_ethtool.c | 75 +++-- drivers/net/e1000/e1000_main.c | 655 ++++++++++++++++++++++++++------------ drivers/net/e1000/e1000_param.c | 10 +- 4 files changed, 564 insertions(+), 243 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 092757bc721f..9b7274b111f3 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -72,6 +72,10 @@ #include #include #include +#ifdef CONFIG_E1000_MQ +#include +#include +#endif #define BAR_0 0 #define BAR_1 1 @@ -168,7 +172,30 @@ struct e1000_buffer { struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; -struct e1000_desc_ring { +struct e1000_tx_ring { + /* pointer to the descriptor ring memory */ + void *desc; + /* physical address of the descriptor ring */ + dma_addr_t dma; + /* length of descriptor ring in bytes */ + unsigned int size; + /* number of descriptors in the ring */ + unsigned int count; + /* next descriptor to associate a buffer with */ + unsigned int next_to_use; + /* next descriptor to check for DD status bit */ + unsigned int next_to_clean; + /* array of buffer information structs */ + struct e1000_buffer *buffer_info; + + struct e1000_buffer previous_buffer_info; + spinlock_t tx_lock; + uint16_t tdh; + uint16_t tdt; + uint64_t pkt; +}; + +struct e1000_rx_ring { /* pointer to the descriptor ring memory */ void *desc; /* physical address of the descriptor ring */ @@ -186,6 +213,10 @@ struct e1000_desc_ring { /* arrays of page information for packet split */ struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; + + uint16_t rdh; + uint16_t rdt; + uint64_t pkt; }; #define E1000_DESC_UNUSED(R) \ @@ -227,9 +258,10 @@ struct e1000_adapter { unsigned long led_status; /* TX */ - struct e1000_desc_ring tx_ring; - struct e1000_buffer previous_buffer_info; - spinlock_t tx_lock; + struct e1000_tx_ring *tx_ring; /* One per active queue */ +#ifdef CONFIG_E1000_MQ + struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */ +#endif uint32_t txd_cmd; uint32_t tx_int_delay; uint32_t tx_abs_int_delay; @@ -246,13 +278,26 @@ struct e1000_adapter { /* RX */ #ifdef CONFIG_E1000_NAPI - boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done, - int work_to_do); + boolean_t (*clean_rx) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do); #else - boolean_t (*clean_rx) (struct e1000_adapter *adapter); + boolean_t (*clean_rx) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); #endif - void (*alloc_rx_buf) (struct e1000_adapter *adapter); - struct e1000_desc_ring rx_ring; + void (*alloc_rx_buf) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); + struct e1000_rx_ring *rx_ring; /* One per active queue */ +#ifdef CONFIG_E1000_NAPI + struct net_device *polling_netdev; /* One per active queue */ +#endif +#ifdef CONFIG_E1000_MQ + struct net_device **cpu_netdev; /* per-cpu */ + struct call_async_data_struct rx_sched_call_data; + int cpu_for_queue[4]; +#endif + int num_queues; + uint64_t hw_csum_err; uint64_t hw_csum_good; uint32_t rx_int_delay; @@ -278,8 +323,8 @@ struct e1000_adapter { struct e1000_phy_stats phy_stats; uint32_t test_icr; - struct e1000_desc_ring test_tx_ring; - struct e1000_desc_ring test_rx_ring; + struct e1000_tx_ring test_tx_ring; + struct e1000_rx_ring test_rx_ring; int msg_enable; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 5f9a36bb77f5..6e7e34f59a34 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -39,10 +39,10 @@ extern int e1000_up(struct e1000_adapter *adapter); extern void e1000_down(struct e1000_adapter *adapter); extern void e1000_reset(struct e1000_adapter *adapter); extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); -extern int e1000_setup_rx_resources(struct e1000_adapter *adapter); -extern int e1000_setup_tx_resources(struct e1000_adapter *adapter); -extern void e1000_free_rx_resources(struct e1000_adapter *adapter); -extern void e1000_free_tx_resources(struct e1000_adapter *adapter); +extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter); extern void e1000_update_stats(struct e1000_adapter *adapter); struct e1000_stats { @@ -576,8 +576,8 @@ e1000_get_ringparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; - struct e1000_desc_ring *txdr = &adapter->tx_ring; - struct e1000_desc_ring *rxdr = &adapter->rx_ring; + struct e1000_tx_ring *txdr = adapter->tx_ring; + struct e1000_rx_ring *rxdr = adapter->rx_ring; ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD : E1000_MAX_82544_RXD; @@ -597,20 +597,40 @@ e1000_set_ringparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; - struct e1000_desc_ring *txdr = &adapter->tx_ring; - struct e1000_desc_ring *rxdr = &adapter->rx_ring; - struct e1000_desc_ring tx_old, tx_new, rx_old, rx_new; - int err; + struct e1000_tx_ring *txdr, *tx_old, *tx_new; + struct e1000_rx_ring *rxdr, *rx_old, *rx_new; + int i, err, tx_ring_size, rx_ring_size; + + tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues; + rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + + if (netif_running(adapter->netdev)) + e1000_down(adapter); tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; + adapter->tx_ring = kmalloc(tx_ring_size, GFP_KERNEL); + if (!adapter->tx_ring) { + err = -ENOMEM; + goto err_setup_rx; + } + memset(adapter->tx_ring, 0, tx_ring_size); + + adapter->rx_ring = kmalloc(rx_ring_size, GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + err = -ENOMEM; + goto err_setup_rx; + } + memset(adapter->rx_ring, 0, rx_ring_size); + + txdr = adapter->tx_ring; + rxdr = adapter->rx_ring; + if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; - if(netif_running(adapter->netdev)) - e1000_down(adapter); - rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD)); @@ -621,11 +641,16 @@ e1000_set_ringparam(struct net_device *netdev, E1000_MAX_TXD : E1000_MAX_82544_TXD)); E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); + for (i = 0; i < adapter->num_queues; i++) { + txdr[i].count = txdr->count; + rxdr[i].count = rxdr->count; + } + if(netif_running(adapter->netdev)) { /* Try to get new resources before deleting old */ - if((err = e1000_setup_rx_resources(adapter))) + if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; - if((err = e1000_setup_tx_resources(adapter))) + if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* save the new, restore the old in order to free it, @@ -635,8 +660,10 @@ e1000_set_ringparam(struct net_device *netdev, tx_new = adapter->tx_ring; adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; - e1000_free_rx_resources(adapter); - e1000_free_tx_resources(adapter); + e1000_free_all_rx_resources(adapter); + e1000_free_all_tx_resources(adapter); + kfree(tx_old); + kfree(rx_old); adapter->rx_ring = rx_new; adapter->tx_ring = tx_new; if((err = e1000_up(adapter))) @@ -645,7 +672,7 @@ e1000_set_ringparam(struct net_device *netdev, return 0; err_setup_tx: - e1000_free_rx_resources(adapter); + e1000_free_all_rx_resources(adapter); err_setup_rx: adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; @@ -903,8 +930,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) static void e1000_free_desc_rings(struct e1000_adapter *adapter) { - struct e1000_desc_ring *txdr = &adapter->test_tx_ring; - struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; int i; @@ -946,8 +973,8 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) static int e1000_setup_desc_rings(struct e1000_adapter *adapter) { - struct e1000_desc_ring *txdr = &adapter->test_tx_ring; - struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; uint32_t rctl; int size, i, ret_val; @@ -1347,8 +1374,8 @@ e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) static int e1000_run_loopback_test(struct e1000_adapter *adapter) { - struct e1000_desc_ring *txdr = &adapter->test_tx_ring; - struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; int i, j, k, l, lc, good_cnt, ret_val=0; unsigned long time; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 407abb2c0548..5145b7345c22 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -102,10 +102,18 @@ int e1000_up(struct e1000_adapter *adapter); void e1000_down(struct e1000_adapter *adapter); void e1000_reset(struct e1000_adapter *adapter); int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); -int e1000_setup_tx_resources(struct e1000_adapter *adapter); -int e1000_setup_rx_resources(struct e1000_adapter *adapter); -void e1000_free_tx_resources(struct e1000_adapter *adapter); -void e1000_free_rx_resources(struct e1000_adapter *adapter); +int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +void e1000_free_all_tx_resources(struct e1000_adapter *adapter); +void e1000_free_all_rx_resources(struct e1000_adapter *adapter); +int e1000_setup_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *txdr); +int e1000_setup_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rxdr); +void e1000_free_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); +void e1000_free_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); void e1000_update_stats(struct e1000_adapter *adapter); /* Local Function Prototypes */ @@ -114,14 +122,22 @@ static int e1000_init_module(void); static void e1000_exit_module(void); static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent); static void __devexit e1000_remove(struct pci_dev *pdev); +static int e1000_alloc_queues(struct e1000_adapter *adapter); +#ifdef CONFIG_E1000_MQ +static void e1000_setup_queue_mapping(struct e1000_adapter *adapter); +#endif static int e1000_sw_init(struct e1000_adapter *adapter); static int e1000_open(struct net_device *netdev); static int e1000_close(struct net_device *netdev); static void e1000_configure_tx(struct e1000_adapter *adapter); static void e1000_configure_rx(struct e1000_adapter *adapter); static void e1000_setup_rctl(struct e1000_adapter *adapter); -static void e1000_clean_tx_ring(struct e1000_adapter *adapter); -static void e1000_clean_rx_ring(struct e1000_adapter *adapter); +static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter); +static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter); +static void e1000_clean_tx_ring(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); +static void e1000_clean_rx_ring(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); static void e1000_set_multi(struct net_device *netdev); static void e1000_update_phy_info(unsigned long data); static void e1000_watchdog(unsigned long data); @@ -132,19 +148,26 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs); -static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter); +static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI -static int e1000_clean(struct net_device *netdev, int *budget); +static int e1000_clean(struct net_device *poll_dev, int *budget); static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); #else -static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter); -static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter); +static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); #endif -static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter); -static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter); +static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); +static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); @@ -289,7 +312,7 @@ int e1000_up(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int err; + int i, err; /* hardware has been reset, we need to reload some things */ @@ -308,7 +331,8 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - adapter->alloc_rx_buf(adapter); + for (i = 0; i < adapter->num_queues; i++) + adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]); #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2) { @@ -363,8 +387,8 @@ e1000_down(struct e1000_adapter *adapter) netif_stop_queue(netdev); e1000_reset(adapter); - e1000_clean_tx_ring(adapter); - e1000_clean_rx_ring(adapter); + e1000_clean_all_tx_rings(adapter); + e1000_clean_all_rx_rings(adapter); /* If WoL is not enabled * and management mode is not IAMT @@ -747,6 +771,9 @@ e1000_remove(struct pci_dev *pdev) uint32_t manc, swsm; flush_scheduled_work(); +#ifdef CONFIG_E1000_NAPI + int i; +#endif if(adapter->hw.mac_type >= e1000_82540 && adapter->hw.media_type == e1000_media_type_copper) { @@ -775,6 +802,10 @@ e1000_remove(struct pci_dev *pdev) } unregister_netdev(netdev); +#ifdef CONFIG_E1000_NAPI + for (i = 0; i < adapter->num_queues; i++) + __dev_put(&adapter->polling_netdev[i]); +#endif if(!e1000_check_phy_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); @@ -802,6 +833,9 @@ e1000_sw_init(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; +#ifdef CONFIG_E1000_NAPI + int i; +#endif /* PCI config space info */ @@ -859,13 +893,70 @@ e1000_sw_init(struct e1000_adapter *adapter) hw->master_slave = E1000_MASTER_SLAVE; } + adapter->num_queues = 1; + + if (e1000_alloc_queues(adapter)) { + DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + +#ifdef CONFIG_E1000_NAPI + for (i = 0; i < adapter->num_queues; i++) { + adapter->polling_netdev[i].priv = adapter; + adapter->polling_netdev[i].poll = &e1000_clean; + adapter->polling_netdev[i].weight = 64; + dev_hold(&adapter->polling_netdev[i]); + set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); + } +#endif atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); - spin_lock_init(&adapter->tx_lock); return 0; } +/** + * e1000_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + * We allocate one ring per queue at run-time since we don't know the + * number of queues at compile-time. The polling_netdev array is + * intended for Multiqueue, but should work fine with a single queue. + **/ + +static int __devinit +e1000_alloc_queues(struct e1000_adapter *adapter) +{ + int size; + + size = sizeof(struct e1000_tx_ring) * adapter->num_queues; + adapter->tx_ring = kmalloc(size, GFP_KERNEL); + if (!adapter->tx_ring) + return -ENOMEM; + memset(adapter->tx_ring, 0, size); + + size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + adapter->rx_ring = kmalloc(size, GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + return -ENOMEM; + } + memset(adapter->rx_ring, 0, size); + +#ifdef CONFIG_E1000_NAPI + size = sizeof(struct net_device) * adapter->num_queues; + adapter->polling_netdev = kmalloc(size, GFP_KERNEL); + if (!adapter->polling_netdev) { + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + return -ENOMEM; + } + memset(adapter->polling_netdev, 0, size); +#endif + + return E1000_SUCCESS; +} + /** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure @@ -887,12 +978,12 @@ e1000_open(struct net_device *netdev) /* allocate transmit descriptors */ - if((err = e1000_setup_tx_resources(adapter))) + if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* allocate receive descriptors */ - if((err = e1000_setup_rx_resources(adapter))) + if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; if((err = e1000_up(adapter))) @@ -906,9 +997,9 @@ e1000_open(struct net_device *netdev) return E1000_SUCCESS; err_up: - e1000_free_rx_resources(adapter); + e1000_free_all_rx_resources(adapter); err_setup_rx: - e1000_free_tx_resources(adapter); + e1000_free_all_tx_resources(adapter); err_setup_tx: e1000_reset(adapter); @@ -934,8 +1025,8 @@ e1000_close(struct net_device *netdev) e1000_down(adapter); - e1000_free_tx_resources(adapter); - e1000_free_rx_resources(adapter); + e1000_free_all_tx_resources(adapter); + e1000_free_all_rx_resources(adapter); if((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { @@ -970,14 +1061,15 @@ e1000_check_64k_bound(struct e1000_adapter *adapter, /** * e1000_setup_tx_resources - allocate Tx resources (Descriptors) * @adapter: board private structure + * @txdr: tx descriptor ring (for a specific queue) to setup * * Return 0 on success, negative on failure **/ int -e1000_setup_tx_resources(struct e1000_adapter *adapter) +e1000_setup_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *txdr) { - struct e1000_desc_ring *txdr = &adapter->tx_ring; struct pci_dev *pdev = adapter->pdev; int size; @@ -1041,6 +1133,35 @@ setup_tx_desc_die: return 0; } +/** + * e1000_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ + +int +e1000_setup_all_tx_resources(struct e1000_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_queues; i++) { + err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]); + if (err) { + DPRINTK(PROBE, ERR, + "Allocation for Tx Queue %u failed\n", i); + break; + } + } + + return err; +} + /** * e1000_configure_tx - Configure 8254x Transmit Unit after Reset * @adapter: board private structure @@ -1051,23 +1172,28 @@ setup_tx_desc_die: static void e1000_configure_tx(struct e1000_adapter *adapter) { - uint64_t tdba = adapter->tx_ring.dma; - uint32_t tdlen = adapter->tx_ring.count * sizeof(struct e1000_tx_desc); - uint32_t tctl, tipg; - - E1000_WRITE_REG(&adapter->hw, TDBAL, (tdba & 0x00000000ffffffffULL)); - E1000_WRITE_REG(&adapter->hw, TDBAH, (tdba >> 32)); - - E1000_WRITE_REG(&adapter->hw, TDLEN, tdlen); + uint64_t tdba; + struct e1000_hw *hw = &adapter->hw; + uint32_t tdlen, tctl, tipg, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ E1000_WRITE_REG(&adapter->hw, TDH, 0); E1000_WRITE_REG(&adapter->hw, TDT, 0); + tdba = adapter->tx_ring[0].dma; + tdlen = adapter->tx_ring[0].count * + sizeof(struct e1000_tx_desc); + E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, TDBAH, (tdba >> 32)); + E1000_WRITE_REG(hw, TDLEN, tdlen); + E1000_WRITE_REG(hw, TDH, 0); + E1000_WRITE_REG(hw, TDT, 0); + adapter->tx_ring[0].tdh = E1000_TDH; + adapter->tx_ring[0].tdt = E1000_TDT; /* Set the default values for the Tx Inter Packet Gap timer */ - switch (adapter->hw.mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: tipg = DEFAULT_82542_TIPG_IPGT; @@ -1075,67 +1201,68 @@ e1000_configure_tx(struct e1000_adapter *adapter) tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT; break; default: - if(adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) tipg = DEFAULT_82543_TIPG_IPGT_FIBER; else tipg = DEFAULT_82543_TIPG_IPGT_COPPER; tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT; tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT; } - E1000_WRITE_REG(&adapter->hw, TIPG, tipg); + E1000_WRITE_REG(hw, TIPG, tipg); /* Set the Tx Interrupt Delay register */ - E1000_WRITE_REG(&adapter->hw, TIDV, adapter->tx_int_delay); - if(adapter->hw.mac_type >= e1000_82540) - E1000_WRITE_REG(&adapter->hw, TADV, adapter->tx_abs_int_delay); + E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay); + if (hw->mac_type >= e1000_82540) + E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay); /* Program the Transmit Control Register */ - tctl = E1000_READ_REG(&adapter->hw, TCTL); + tctl = E1000_READ_REG(hw, TCTL); tctl &= ~E1000_TCTL_CT; tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - E1000_WRITE_REG(&adapter->hw, TCTL, tctl); + E1000_WRITE_REG(hw, TCTL, tctl); - e1000_config_collision_dist(&adapter->hw); + e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; - if(adapter->hw.mac_type < e1000_82543) + if (hw->mac_type < e1000_82543) adapter->txd_cmd |= E1000_TXD_CMD_RPS; else adapter->txd_cmd |= E1000_TXD_CMD_RS; /* Cache if we're 82544 running in PCI-X because we'll * need this to apply a workaround later in the send path. */ - if(adapter->hw.mac_type == e1000_82544 && - adapter->hw.bus_type == e1000_bus_type_pcix) + if (hw->mac_type == e1000_82544 && + hw->bus_type == e1000_bus_type_pcix) adapter->pcix_82544 = 1; } /** * e1000_setup_rx_resources - allocate Rx resources (Descriptors) * @adapter: board private structure + * @rxdr: rx descriptor ring (for a specific queue) to setup * * Returns 0 on success, negative on failure **/ int -e1000_setup_rx_resources(struct e1000_adapter *adapter) +e1000_setup_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rxdr) { - struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); - if(!rxdr->buffer_info) { + if (!rxdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; @@ -1175,13 +1302,13 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - if(!rxdr->desc) { + if (!rxdr->desc) { + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); setup_rx_desc_die: vfree(rxdr->buffer_info); kfree(rxdr->ps_page); kfree(rxdr->ps_page_dma); - DPRINTK(PROBE, ERR, - "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } @@ -1193,9 +1320,12 @@ setup_rx_desc_die: "at %p\n", rxdr->size, rxdr->desc); /* Try again, without freeing the previous */ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - if(!rxdr->desc) { /* Failed allocation, critical failure */ + if (!rxdr->desc) { pci_free_consistent(pdev, rxdr->size, olddesc, olddma); + DPRINTK(PROBE, ERR, + "Unable to allocate memory " + "for the receive descriptor ring\n"); goto setup_rx_desc_die; } @@ -1207,10 +1337,7 @@ setup_rx_desc_die: DPRINTK(PROBE, ERR, "Unable to allocate aligned memory " "for the receive descriptor ring\n"); - vfree(rxdr->buffer_info); - kfree(rxdr->ps_page); - kfree(rxdr->ps_page_dma); - return -ENOMEM; + goto setup_rx_desc_die; } else { /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); @@ -1224,6 +1351,35 @@ setup_rx_desc_die: return 0; } +/** + * e1000_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ + +int +e1000_setup_all_rx_resources(struct e1000_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_queues; i++) { + err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]); + if (err) { + DPRINTK(PROBE, ERR, + "Allocation for Rx Queue %u failed\n", i); + break; + } + } + + return err; +} + /** * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure @@ -1326,47 +1482,55 @@ e1000_setup_rctl(struct e1000_adapter *adapter) static void e1000_configure_rx(struct e1000_adapter *adapter) { - uint64_t rdba = adapter->rx_ring.dma; - uint32_t rdlen, rctl, rxcsum; + uint64_t rdba; + struct e1000_hw *hw = &adapter->hw; + uint32_t rdlen, rctl, rxcsum, ctrl_ext; +#ifdef CONFIG_E1000_MQ + uint32_t reta, mrqc; + int i; +#endif if(adapter->rx_ps) { - rdlen = adapter->rx_ring.count * + rdlen = adapter->rx_ring[0].count * sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; } else { - rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); + rdlen = adapter->rx_ring[0].count * + sizeof(struct e1000_rx_desc); adapter->clean_rx = e1000_clean_rx_irq; adapter->alloc_rx_buf = e1000_alloc_rx_buffers; } /* disable receives while setting up the descriptors */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN); + rctl = E1000_READ_REG(hw, RCTL); + E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); /* set the Receive Delay Timer Register */ - E1000_WRITE_REG(&adapter->hw, RDTR, adapter->rx_int_delay); + E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay); - if(adapter->hw.mac_type >= e1000_82540) { - E1000_WRITE_REG(&adapter->hw, RADV, adapter->rx_abs_int_delay); + if (hw->mac_type >= e1000_82540) { + E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay); if(adapter->itr > 1) - E1000_WRITE_REG(&adapter->hw, ITR, + E1000_WRITE_REG(hw, ITR, 1000000000 / (adapter->itr * 256)); } - /* Setup the Base and Length of the Rx Descriptor Ring */ - E1000_WRITE_REG(&adapter->hw, RDBAL, (rdba & 0x00000000ffffffffULL)); - E1000_WRITE_REG(&adapter->hw, RDBAH, (rdba >> 32)); - - E1000_WRITE_REG(&adapter->hw, RDLEN, rdlen); - - /* Setup the HW Rx Head and Tail Descriptor Pointers */ - E1000_WRITE_REG(&adapter->hw, RDH, 0); - E1000_WRITE_REG(&adapter->hw, RDT, 0); + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + rdba = adapter->rx_ring[0].dma; + E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); + E1000_WRITE_REG(hw, RDLEN, rdlen); + E1000_WRITE_REG(hw, RDH, 0); + E1000_WRITE_REG(hw, RDT, 0); + adapter->rx_ring[0].rdh = E1000_RDH; + adapter->rx_ring[0].rdt = E1000_RDT; + break; /* Enable 82543 Receive Checksum Offload for TCP and UDP */ - if(adapter->hw.mac_type >= e1000_82543) { - rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM); + if (hw->mac_type >= e1000_82543) { + rxcsum = E1000_READ_REG(hw, RXCSUM); if(adapter->rx_csum == TRUE) { rxcsum |= E1000_RXCSUM_TUOFL; @@ -1380,37 +1544,54 @@ e1000_configure_rx(struct e1000_adapter *adapter) rxcsum &= ~E1000_RXCSUM_TUOFL; /* don't need to clear IPPCSE as it defaults to 0 */ } - E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum); + E1000_WRITE_REG(hw, RXCSUM, rxcsum); } - if (adapter->hw.mac_type == e1000_82573) - E1000_WRITE_REG(&adapter->hw, ERT, 0x0100); + if (hw->mac_type == e1000_82573) + E1000_WRITE_REG(hw, ERT, 0x0100); /* Enable Receives */ - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); } /** - * e1000_free_tx_resources - Free Tx Resources + * e1000_free_tx_resources - Free Tx Resources per Queue * @adapter: board private structure + * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources **/ void -e1000_free_tx_resources(struct e1000_adapter *adapter) +e1000_free_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring) { struct pci_dev *pdev = adapter->pdev; - e1000_clean_tx_ring(adapter); + e1000_clean_tx_ring(adapter, tx_ring); - vfree(adapter->tx_ring.buffer_info); - adapter->tx_ring.buffer_info = NULL; + vfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; - pci_free_consistent(pdev, adapter->tx_ring.size, - adapter->tx_ring.desc, adapter->tx_ring.dma); + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); - adapter->tx_ring.desc = NULL; + tx_ring->desc = NULL; +} + +/** + * e1000_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ + +void +e1000_free_all_tx_resources(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_free_tx_resources(adapter, &adapter->tx_ring[i]); } static inline void @@ -1433,21 +1614,22 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, /** * e1000_clean_tx_ring - Free Tx Buffers * @adapter: board private structure + * @tx_ring: ring to be cleaned **/ static void -e1000_clean_tx_ring(struct e1000_adapter *adapter) +e1000_clean_tx_ring(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring) { - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct e1000_buffer *buffer_info; unsigned long size; unsigned int i; /* Free all the Tx ring sk_buffs */ - if (likely(adapter->previous_buffer_info.skb != NULL)) { + if (likely(tx_ring->previous_buffer_info.skb != NULL)) { e1000_unmap_and_free_tx_resource(adapter, - &adapter->previous_buffer_info); + &tx_ring->previous_buffer_info); } for(i = 0; i < tx_ring->count; i++) { @@ -1465,24 +1647,39 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter) tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - E1000_WRITE_REG(&adapter->hw, TDH, 0); - E1000_WRITE_REG(&adapter->hw, TDT, 0); + writel(0, adapter->hw.hw_addr + tx_ring->tdh); + writel(0, adapter->hw.hw_addr + tx_ring->tdt); +} + +/** + * e1000_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ + +static void +e1000_clean_all_tx_rings(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]); } /** * e1000_free_rx_resources - Free Rx Resources * @adapter: board private structure + * @rx_ring: ring to clean the resources from * * Free all receive software resources **/ void -e1000_free_rx_resources(struct e1000_adapter *adapter) +e1000_free_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; - e1000_clean_rx_ring(adapter); + e1000_clean_rx_ring(adapter, rx_ring); vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; @@ -1497,14 +1694,31 @@ e1000_free_rx_resources(struct e1000_adapter *adapter) } /** - * e1000_clean_rx_ring - Free Rx Buffers + * e1000_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ + +void +e1000_free_all_rx_resources(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_free_rx_resources(adapter, &adapter->rx_ring[i]); +} + +/** + * e1000_clean_rx_ring - Free Rx Buffers per Queue * @adapter: board private structure + * @rx_ring: ring to free buffers from **/ static void -e1000_clean_rx_ring(struct e1000_adapter *adapter) +e1000_clean_rx_ring(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct e1000_buffer *buffer_info; struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; @@ -1553,8 +1767,22 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; - E1000_WRITE_REG(&adapter->hw, RDH, 0); - E1000_WRITE_REG(&adapter->hw, RDT, 0); + writel(0, adapter->hw.hw_addr + rx_ring->rdh); + writel(0, adapter->hw.hw_addr + rx_ring->rdt); +} + +/** + * e1000_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ + +static void +e1000_clean_all_rx_rings(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]); } /* The 82542 2.0 (revision 2) needs to have the receive unit in reset @@ -1575,7 +1803,7 @@ e1000_enter_82542_rst(struct e1000_adapter *adapter) mdelay(5); if(netif_running(netdev)) - e1000_clean_rx_ring(adapter); + e1000_clean_all_rx_rings(adapter); } static void @@ -1595,7 +1823,7 @@ e1000_leave_82542_rst(struct e1000_adapter *adapter) if(netif_running(netdev)) { e1000_configure_rx(adapter); - e1000_alloc_rx_buffers(adapter); + e1000_alloc_rx_buffers(adapter, &adapter->rx_ring[0]); } } @@ -1664,12 +1892,10 @@ e1000_set_multi(struct net_device *netdev) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; - unsigned long flags; uint32_t rctl; uint32_t hash_value; int i, rar_entries = E1000_RAR_ENTRIES; - spin_lock_irqsave(&adapter->tx_lock, flags); /* reserve RAR[14] for LAA over-write work-around */ if (adapter->hw.mac_type == e1000_82571) rar_entries--; @@ -1725,8 +1951,6 @@ e1000_set_multi(struct net_device *netdev) if(hw->mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); - - spin_unlock_irqrestore(&adapter->tx_lock, flags); } /* Need to wait a few seconds after link up to get diagnostic information from @@ -1798,7 +2022,7 @@ static void e1000_watchdog_task(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - struct e1000_desc_ring *txdr = &adapter->tx_ring; + struct e1000_tx_ring *txdr = &adapter->tx_ring[0]; uint32_t link; e1000_check_for_link(&adapter->hw); @@ -1857,8 +2081,8 @@ e1000_watchdog_task(struct e1000_adapter *adapter) e1000_update_adaptive(&adapter->hw); - if(!netif_carrier_ok(netdev)) { - if(E1000_DESC_UNUSED(txdr) + 1 < txdr->count) { + if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) { + if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) { /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. @@ -1903,7 +2127,8 @@ e1000_watchdog_task(struct e1000_adapter *adapter) #define E1000_TX_FLAGS_VLAN_SHIFT 16 static inline int -e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) +e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, + struct sk_buff *skb) { #ifdef NETIF_F_TSO struct e1000_context_desc *context_desc; @@ -1954,8 +2179,8 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); - i = adapter->tx_ring.next_to_use; - context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); + i = tx_ring->next_to_use; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->lower_setup.ip_fields.ipcss = ipcss; context_desc->lower_setup.ip_fields.ipcso = ipcso; @@ -1967,8 +2192,8 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; context_desc->cmd_and_length = cpu_to_le32(cmd_length); - if(++i == adapter->tx_ring.count) i = 0; - adapter->tx_ring.next_to_use = i; + if (++i == tx_ring->count) i = 0; + tx_ring->next_to_use = i; return 1; } @@ -1978,7 +2203,8 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) } static inline boolean_t -e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) +e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, + struct sk_buff *skb) { struct e1000_context_desc *context_desc; unsigned int i; @@ -1987,8 +2213,8 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) if(likely(skb->ip_summed == CHECKSUM_HW)) { css = skb->h.raw - skb->data; - i = adapter->tx_ring.next_to_use; - context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); + i = tx_ring->next_to_use; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->upper_setup.tcp_fields.tucss = css; context_desc->upper_setup.tcp_fields.tucso = css + skb->csum; @@ -1996,8 +2222,8 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); - if(unlikely(++i == adapter->tx_ring.count)) i = 0; - adapter->tx_ring.next_to_use = i; + if (unlikely(++i == tx_ring->count)) i = 0; + tx_ring->next_to_use = i; return TRUE; } @@ -2009,11 +2235,10 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) #define E1000_MAX_DATA_PER_TXD (1<tx_ring; struct e1000_buffer *buffer_info; unsigned int len = skb->len; unsigned int offset = 0, size, count = 0, i; @@ -2109,9 +2334,9 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, } static inline void -e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) +e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, + int tx_flags, int count) { - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct e1000_tx_desc *tx_desc = NULL; struct e1000_buffer *buffer_info; uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; @@ -2157,7 +2382,7 @@ e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) wmb(); tx_ring->next_to_use = i; - E1000_WRITE_REG(&adapter->hw, TDT, i); + writel(i, adapter->hw.hw_addr + tx_ring->tdt); } /** @@ -2250,6 +2475,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_tx_ring *tx_ring; unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD; unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; @@ -2262,7 +2488,8 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; - if(unlikely(skb->len <= 0)) { + tx_ring = adapter->tx_ring; + if (unlikely(skb->len <= 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -2306,12 +2533,6 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->pcix_82544) count += nr_frags; - local_irq_save(flags); - if (!spin_trylock(&adapter->tx_lock)) { - /* Collision - tell upper layer to requeue */ - local_irq_restore(flags); - return NETDEV_TX_LOCKED; - } #ifdef NETIF_F_TSO /* TSO Workaround for 82571/2 Controllers -- if skb->data * points to just header, pull a few bytes of payload from @@ -2336,12 +2557,18 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) e1000_transfer_dhcp_info(adapter, skb); + local_irq_save(flags); + if (!spin_trylock(&tx_ring->tx_lock)) { + /* Collision - tell upper layer to requeue */ + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ - if(unlikely(E1000_DESC_UNUSED(&adapter->tx_ring) < count + 2)) { + if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) { netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } @@ -2349,7 +2576,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(unlikely(e1000_82547_fifo_workaround(adapter, skb))) { netif_stop_queue(netdev); mod_timer(&adapter->tx_fifo_stall_timer, jiffies); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } } @@ -2359,37 +2586,37 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); } - first = adapter->tx_ring.next_to_use; + first = tx_ring->next_to_use; - tso = e1000_tso(adapter, skb); + tso = e1000_tso(adapter, tx_ring, skb); if (tso < 0) { dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_OK; } if (likely(tso)) tx_flags |= E1000_TX_FLAGS_TSO; - else if(likely(e1000_tx_csum(adapter, skb))) + else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ - if(likely(skb->protocol == ntohs(ETH_P_IP))) + if (likely(skb->protocol == ntohs(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; - e1000_tx_queue(adapter, - e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss), - tx_flags); + e1000_tx_queue(adapter, tx_ring, tx_flags, + e1000_tx_map(adapter, tx_ring, skb, first, + max_per_txd, nr_frags, mss)); netdev->trans_start = jiffies; /* Make sure there is space in the ring for the next send. */ - if(unlikely(E1000_DESC_UNUSED(&adapter->tx_ring) < MAX_SKB_FRAGS + 2)) + if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2)) netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_OK; } @@ -2666,9 +2893,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); -#ifndef CONFIG_E1000_NAPI - unsigned int i; -#endif + int i; if(unlikely(!icr)) return IRQ_NONE; /* Not our interrupt */ @@ -2679,17 +2904,15 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } #ifdef CONFIG_E1000_NAPI - if(likely(netif_rx_schedule_prep(netdev))) { - - /* Disable interrupts and register for poll. The flush - of the posted write is intentionally left out. - */ - - atomic_inc(&adapter->irq_sem); - E1000_WRITE_REG(hw, IMC, ~0); - __netif_rx_schedule(netdev); + atomic_inc(&adapter->irq_sem); + E1000_WRITE_REG(hw, IMC, ~0); + E1000_WRITE_FLUSH(hw); } #else + if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) + __netif_rx_schedule(&adapter->polling_netdev[0]); + else + e1000_irq_enable(adapter); /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent. @@ -2706,12 +2929,13 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } for(i = 0; i < E1000_MAX_INTR; i++) - if(unlikely(!adapter->clean_rx(adapter) & - !e1000_clean_tx_irq(adapter))) + if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & + !e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); + #endif return IRQ_HANDLED; @@ -2724,22 +2948,37 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) **/ static int -e1000_clean(struct net_device *netdev, int *budget) +e1000_clean(struct net_device *poll_dev, int *budget) { - struct e1000_adapter *adapter = netdev_priv(netdev); - int work_to_do = min(*budget, netdev->quota); - int tx_cleaned; - int work_done = 0; + struct e1000_adapter *adapter; + int work_to_do = min(*budget, poll_dev->quota); + int tx_cleaned, i = 0, work_done = 0; + + /* Must NOT use netdev_priv macro here. */ + adapter = poll_dev->priv; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(adapter->netdev)) + goto quit_polling; - tx_cleaned = e1000_clean_tx_irq(adapter); - adapter->clean_rx(adapter, &work_done, work_to_do); + while (poll_dev != &adapter->polling_netdev[i]) { + i++; + if (unlikely(i == adapter->num_queues)) + BUG(); + } + + tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]); + adapter->clean_rx(adapter, &adapter->rx_ring[i], + &work_done, work_to_do); *budget -= work_done; - netdev->quota -= work_done; + poll_dev->quota -= work_done; - if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { /* If no Tx and not enough Rx work done, exit the polling mode */ - netif_rx_complete(netdev); + if((!tx_cleaned && (work_done == 0)) || + !netif_running(adapter->netdev)) { +quit_polling: + netif_rx_complete(poll_dev); e1000_irq_enable(adapter); return 0; } @@ -2754,9 +2993,9 @@ e1000_clean(struct net_device *netdev, int *budget) **/ static boolean_t -e1000_clean_tx_irq(struct e1000_adapter *adapter) +e1000_clean_tx_irq(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring) { - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct net_device *netdev = adapter->netdev; struct e1000_tx_desc *tx_desc, *eop_desc; struct e1000_buffer *buffer_info; @@ -2767,12 +3006,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); - while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { + while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { /* Premature writeback of Tx descriptors clear (free buffers * and unmap pci_mapping) previous_buffer_info */ - if (likely(adapter->previous_buffer_info.skb != NULL)) { + if (likely(tx_ring->previous_buffer_info.skb != NULL)) { e1000_unmap_and_free_tx_resource(adapter, - &adapter->previous_buffer_info); + &tx_ring->previous_buffer_info); } for(cleaned = FALSE; !cleaned; ) { @@ -2788,7 +3027,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) #ifdef NETIF_F_TSO } else { if (cleaned) { - memcpy(&adapter->previous_buffer_info, + memcpy(&tx_ring->previous_buffer_info, buffer_info, sizeof(struct e1000_buffer)); memset(buffer_info, 0, @@ -2806,6 +3045,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) if(unlikely(++i == tx_ring->count)) i = 0; } + + tx_ring->pkt++; eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); @@ -2813,15 +3054,15 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) tx_ring->next_to_clean = i; - spin_lock(&adapter->tx_lock); + spin_lock(&tx_ring->tx_lock); if(unlikely(cleaned && netif_queue_stopped(netdev) && netif_carrier_ok(netdev))) netif_wake_queue(netdev); - spin_unlock(&adapter->tx_lock); - if(adapter->detect_tx_hung) { + spin_unlock(&tx_ring->tx_lock); + if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = FALSE; @@ -2845,8 +3086,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) " next_to_watch <%x>\n" " jiffies <%lx>\n" " next_to_watch.status <%x>\n", - E1000_READ_REG(&adapter->hw, TDH), - E1000_READ_REG(&adapter->hw, TDT), + readl(adapter->hw.hw_addr + tx_ring->tdh), + readl(adapter->hw.hw_addr + tx_ring->tdt), tx_ring->next_to_use, i, (unsigned long long)tx_ring->buffer_info[i].dma, @@ -2858,12 +3099,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) } } #ifdef NETIF_F_TSO - - if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && - time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ))) + if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) e1000_unmap_and_free_tx_resource( - adapter, &adapter->previous_buffer_info); - + adapter, &tx_ring->previous_buffer_info); #endif return cleaned; } @@ -2926,13 +3165,14 @@ e1000_rx_checksum(struct e1000_adapter *adapter, static boolean_t #ifdef CONFIG_E1000_NAPI -e1000_clean_rx_irq(struct e1000_adapter *adapter, int *work_done, - int work_to_do) +e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do) #else -e1000_clean_rx_irq(struct e1000_adapter *adapter) +e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) #endif { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_rx_desc *rx_desc; @@ -3018,6 +3258,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) } #endif /* CONFIG_E1000_NAPI */ netdev->last_rx = jiffies; + rx_ring->pkt++; next_desc: rx_desc->status = 0; @@ -3027,7 +3268,7 @@ next_desc: rx_desc = E1000_RX_DESC(*rx_ring, i); } rx_ring->next_to_clean = i; - adapter->alloc_rx_buf(adapter); + adapter->alloc_rx_buf(adapter, rx_ring); return cleaned; } @@ -3039,13 +3280,14 @@ next_desc: static boolean_t #ifdef CONFIG_E1000_NAPI -e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, - int work_to_do) +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do) #else -e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) #endif { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; union e1000_rx_desc_packet_split *rx_desc; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -3145,6 +3387,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) } #endif /* CONFIG_E1000_NAPI */ netdev->last_rx = jiffies; + rx_ring->pkt++; next_desc: rx_desc->wb.middle.status_error &= ~0xFF; @@ -3155,7 +3398,7 @@ next_desc: staterr = le32_to_cpu(rx_desc->wb.middle.status_error); } rx_ring->next_to_clean = i; - adapter->alloc_rx_buf(adapter); + adapter->alloc_rx_buf(adapter, rx_ring); return cleaned; } @@ -3166,9 +3409,9 @@ next_desc: **/ static void -e1000_alloc_rx_buffers(struct e1000_adapter *adapter) +e1000_alloc_rx_buffers(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_rx_desc *rx_desc; @@ -3252,7 +3495,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - E1000_WRITE_REG(&adapter->hw, RDT, i); + writel(i, adapter->hw.hw_addr + rx_ring->rdt); } if(unlikely(++i == rx_ring->count)) i = 0; @@ -3268,9 +3511,9 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) **/ static void -e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) +e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_packet_split *rx_desc; @@ -3338,7 +3581,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) * descriptors are 32 bytes...so we increment tail * twice as much. */ - E1000_WRITE_REG(&adapter->hw, RDT, i<<1); + writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt); } if(unlikely(++i == rx_ring->count)) i = 0; diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 676247f9f1cc..38695d5b4637 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -306,7 +306,8 @@ e1000_check_options(struct e1000_adapter *adapter) .def = E1000_DEFAULT_TXD, .arg = { .r = { .min = E1000_MIN_TXD }} }; - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; + struct e1000_tx_ring *tx_ring = adapter->tx_ring; + int i; e1000_mac_type mac_type = adapter->hw.mac_type; opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD; @@ -319,6 +320,8 @@ e1000_check_options(struct e1000_adapter *adapter) } else { tx_ring->count = opt.def; } + for (i = 0; i < adapter->num_queues; i++) + tx_ring[i].count = tx_ring->count; } { /* Receive Descriptor Count */ struct e1000_option opt = { @@ -329,7 +332,8 @@ e1000_check_options(struct e1000_adapter *adapter) .def = E1000_DEFAULT_RXD, .arg = { .r = { .min = E1000_MIN_RXD }} }; - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + struct e1000_rx_ring *rx_ring = adapter->rx_ring; + int i; e1000_mac_type mac_type = adapter->hw.mac_type; opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD; @@ -342,6 +346,8 @@ e1000_check_options(struct e1000_adapter *adapter) } else { rx_ring->count = opt.def; } + for (i = 0; i < adapter->num_queues; i++) + rx_ring[i].count = rx_ring->count; } { /* Checksum Offload Enable/Disable */ struct e1000_option opt = { -- cgit v1.2.3 From 24025e4ecf88743e1b3d46451b0e3f9de4bbcba5 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:03:23 -0400 Subject: e1000: implementation of the multi-queue feature Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 191 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 188 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5145b7345c22..ce1044a80bd2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -195,6 +195,11 @@ static int e1000_resume(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif +#ifdef CONFIG_E1000_MQ +/* for multiple Rx queues */ +void e1000_rx_schedule(void *data); +#endif + /* Exported from other modules */ extern void e1000_check_options(struct e1000_adapter *adapter); @@ -368,6 +373,9 @@ e1000_down(struct e1000_adapter *adapter) struct net_device *netdev = adapter->netdev; e1000_irq_disable(adapter); +#ifdef CONFIG_E1000_MQ + while (atomic_read(&adapter->rx_sched_call_data.count) != 0); +#endif free_irq(adapter->pdev->irq, netdev); #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2 && @@ -810,9 +818,19 @@ e1000_remove(struct pci_dev *pdev) if(!e1000_check_phy_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +#ifdef CONFIG_E1000_NAPI + kfree(adapter->polling_netdev); +#endif + iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); +#ifdef CONFIG_E1000_MQ + free_percpu(adapter->cpu_netdev); + free_percpu(adapter->cpu_tx_ring); +#endif free_netdev(netdev); pci_disable_device(pdev); @@ -893,7 +911,21 @@ e1000_sw_init(struct e1000_adapter *adapter) hw->master_slave = E1000_MASTER_SLAVE; } +#ifdef CONFIG_E1000_MQ + /* Number of supported queues */ + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + adapter->num_queues = 2; + break; + default: + adapter->num_queues = 1; + break; + } + adapter->num_queues = min(adapter->num_queues, num_online_cpus()); +#else adapter->num_queues = 1; +#endif if (e1000_alloc_queues(adapter)) { DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); @@ -909,6 +941,11 @@ e1000_sw_init(struct e1000_adapter *adapter) set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); } #endif + +#ifdef CONFIG_E1000_MQ + e1000_setup_queue_mapping(adapter); +#endif + atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); @@ -957,6 +994,39 @@ e1000_alloc_queues(struct e1000_adapter *adapter) return E1000_SUCCESS; } +#ifdef CONFIG_E1000_MQ +static void __devinit +e1000_setup_queue_mapping(struct e1000_adapter *adapter) +{ + int i, cpu; + + adapter->rx_sched_call_data.func = e1000_rx_schedule; + adapter->rx_sched_call_data.info = adapter->netdev; + cpus_clear(adapter->rx_sched_call_data.cpumask); + + adapter->cpu_netdev = alloc_percpu(struct net_device *); + adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *); + + lock_cpu_hotplug(); + i = 0; + for_each_online_cpu(cpu) { + *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues]; + /* This is incomplete because we'd like to assign separate + * physical cpus to these netdev polling structures and + * avoid saturating a subset of cpus. + */ + if (i < adapter->num_queues) { + *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i]; + adapter->cpu_for_queue[i] = cpu; + } else + *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL; + + i++; + } + unlock_cpu_hotplug(); +} +#endif + /** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure @@ -1178,8 +1248,21 @@ e1000_configure_tx(struct e1000_adapter *adapter) /* Setup the HW Tx Head and Tail descriptor pointers */ - E1000_WRITE_REG(&adapter->hw, TDH, 0); - E1000_WRITE_REG(&adapter->hw, TDT, 0); + switch (adapter->num_queues) { + case 2: + tdba = adapter->tx_ring[1].dma; + tdlen = adapter->tx_ring[1].count * + sizeof(struct e1000_tx_desc); + E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32)); + E1000_WRITE_REG(hw, TDLEN1, tdlen); + E1000_WRITE_REG(hw, TDH1, 0); + E1000_WRITE_REG(hw, TDT1, 0); + adapter->tx_ring[1].tdh = E1000_TDH1; + adapter->tx_ring[1].tdt = E1000_TDT1; + /* Fall Through */ + case 1: + default: tdba = adapter->tx_ring[0].dma; tdlen = adapter->tx_ring[0].count * sizeof(struct e1000_tx_desc); @@ -1190,6 +1273,8 @@ e1000_configure_tx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, TDT, 0); adapter->tx_ring[0].tdh = E1000_TDH; adapter->tx_ring[0].tdt = E1000_TDT; + break; + } /* Set the default values for the Tx Inter Packet Gap timer */ @@ -1222,7 +1307,7 @@ e1000_configure_tx(struct e1000_adapter *adapter) tctl = E1000_READ_REG(hw, TCTL); tctl &= ~E1000_TCTL_CT; - tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | + tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); E1000_WRITE_REG(hw, TCTL, tctl); @@ -1518,6 +1603,21 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ + switch (adapter->num_queues) { +#ifdef CONFIG_E1000_MQ + case 2: + rdba = adapter->rx_ring[1].dma; + E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32)); + E1000_WRITE_REG(hw, RDLEN1, rdlen); + E1000_WRITE_REG(hw, RDH1, 0); + E1000_WRITE_REG(hw, RDT1, 0); + adapter->rx_ring[1].rdh = E1000_RDH1; + adapter->rx_ring[1].rdt = E1000_RDT1; + /* Fall Through */ +#endif + case 1: + default: rdba = adapter->rx_ring[0].dma; E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); @@ -1527,6 +1627,47 @@ e1000_configure_rx(struct e1000_adapter *adapter) adapter->rx_ring[0].rdh = E1000_RDH; adapter->rx_ring[0].rdt = E1000_RDT; break; + } + +#ifdef CONFIG_E1000_MQ + if (adapter->num_queues > 1) { + uint32_t random[10]; + + get_random_bytes(&random[0], 40); + + if (hw->mac_type <= e1000_82572) { + E1000_WRITE_REG(hw, RSSIR, 0); + E1000_WRITE_REG(hw, RSSIM, 0); + } + + switch (adapter->num_queues) { + case 2: + default: + reta = 0x00800080; + mrqc = E1000_MRQC_ENABLE_RSS_2Q; + break; + } + + /* Fill out redirection table */ + for (i = 0; i < 32; i++) + E1000_WRITE_REG_ARRAY(hw, RETA, i, reta); + /* Fill out hash function seeds */ + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]); + + mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP); + E1000_WRITE_REG(hw, MRQC, mrqc); + } + + /* Multiqueue and packet checksumming are mutually exclusive. */ + if (hw->mac_type >= e1000_82571) { + rxcsum = E1000_READ_REG(hw, RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + E1000_WRITE_REG(hw, RXCSUM, rxcsum); + } + +#else /* Enable 82543 Receive Checksum Offload for TCP and UDP */ if (hw->mac_type >= e1000_82543) { @@ -1546,6 +1687,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) } E1000_WRITE_REG(hw, RXCSUM, rxcsum); } +#endif /* CONFIG_E1000_MQ */ if (hw->mac_type == e1000_82573) E1000_WRITE_REG(hw, ERT, 0x0100); @@ -2488,7 +2630,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; +#ifdef CONFIG_E1000_MQ + tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id()); +#else tx_ring = adapter->tx_ring; +#endif + if (unlikely(skb->len <= 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -2879,6 +3026,29 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +#ifdef CONFIG_E1000_MQ +void +e1000_rx_schedule(void *data) +{ + struct net_device *poll_dev, *netdev = data; + struct e1000_adapter *adapter = netdev->priv; + int this_cpu = get_cpu(); + + poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu); + if (poll_dev == NULL) { + put_cpu(); + return; + } + + if (likely(netif_rx_schedule_prep(poll_dev))) + __netif_rx_schedule(poll_dev); + else + e1000_irq_enable(adapter); + + put_cpu(); +} +#endif + /** * e1000_intr - Interrupt Handler * @irq: interrupt number @@ -2907,12 +3077,27 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) atomic_inc(&adapter->irq_sem); E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); +#ifdef CONFIG_E1000_MQ + if (atomic_read(&adapter->rx_sched_call_data.count) == 0) { + cpu_set(adapter->cpu_for_queue[0], + adapter->rx_sched_call_data.cpumask); + for (i = 1; i < adapter->num_queues; i++) { + cpu_set(adapter->cpu_for_queue[i], + adapter->rx_sched_call_data.cpumask); + atomic_inc(&adapter->irq_sem); + } + atomic_set(&adapter->rx_sched_call_data.count, i); + smp_call_async_mask(&adapter->rx_sched_call_data); + } else { + printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count)); } #else if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) __netif_rx_schedule(&adapter->polling_netdev[0]); else e1000_irq_enable(adapter); +#endif +#else /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent. -- cgit v1.2.3 From 2ae76d98fb9f0a9226dd62cf0a0b7547507d2862 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:04:22 -0400 Subject: e1000: Enable custom configuration bits for 82571/2 controllers Enable custom configuration bits for 82571/2 controllers. The bits are required for correct functionality of these controllers. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ce1044a80bd2..ad92115f20a0 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1151,6 +1151,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, return -ENOMEM; } memset(txdr->buffer_info, 0, size); + memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer)); /* round up to nearest 4K */ @@ -1199,6 +1200,7 @@ setup_tx_desc_die: txdr->next_to_use = 0; txdr->next_to_clean = 0; + spin_lock_init(&txdr->tx_lock); return 0; } @@ -1312,6 +1314,19 @@ e1000_configure_tx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, TCTL, tctl); + if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { + tarc = E1000_READ_REG(hw, TARC0); + tarc |= ((1 << 25) | (1 << 21)); + E1000_WRITE_REG(hw, TARC0, tarc); + tarc = E1000_READ_REG(hw, TARC1); + tarc |= (1 << 25); + if (tctl & E1000_TCTL_MULR) + tarc &= ~(1 << 28); + else + tarc |= (1 << 28); + E1000_WRITE_REG(hw, TARC1, tarc); + } + e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ @@ -1601,6 +1616,14 @@ e1000_configure_rx(struct e1000_adapter *adapter) 1000000000 / (adapter->itr * 256)); } + if (hw->mac_type >= e1000_82571) { + /* Reset delay timers after every interrupt */ + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_CANC; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + } + /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ switch (adapter->num_queues) { -- cgit v1.2.3 From e4c811c9d2f2728ce15440c99b3b44b72799b43f Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:05:44 -0400 Subject: e1000: Fixes for packet split related issues Fixes for packet split related issues * On platforms where PAGE_SIZE > 4K, driver will use only required number of pages compared to always using 3 pages. * Packet split won't be used if the PAGE_SIZE is > 16K * Adds a statistics counter to splits. * Setting the non Null ptr to zero sized buffers to solve packet split receive descriptor error * When the no of pages needed is calculated, the header buffer is not included for a given MTU. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000.h | 7 ++-- drivers/net/e1000/e1000_ethtool.c | 3 +- drivers/net/e1000/e1000_main.c | 88 ++++++++++++++++++++++++--------------- 3 files changed, 60 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 9b7274b111f3..3f653a93e1bc 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -169,8 +169,8 @@ struct e1000_buffer { uint16_t next_to_watch; }; -struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; -struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; +struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; }; +struct e1000_ps_page_dma { uint64_t ps_page_dma[PS_PAGE_BUFFERS]; }; struct e1000_tx_ring { /* pointer to the descriptor ring memory */ @@ -300,10 +300,11 @@ struct e1000_adapter { uint64_t hw_csum_err; uint64_t hw_csum_good; + uint64_t rx_hdr_split; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; boolean_t rx_csum; - boolean_t rx_ps; + unsigned int rx_ps_pages; uint32_t gorcl; uint64_t gorcl_old; uint16_t rx_ps_bsize0; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6e7e34f59a34..183b583df1d7 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -91,7 +91,8 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, - { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) } + { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, + { "rx_header_split", E1000_STAT(rx_hdr_split) }, }; #define E1000_STATS_LEN \ sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ad92115f20a0..090229f7a95c 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1484,12 +1484,16 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter) * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure **/ - +#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ + (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) static void e1000_setup_rctl(struct e1000_adapter *adapter) { uint32_t rctl, rfctl; uint32_t psrctl = 0; +#ifdef CONFIG_E1000_PACKET_SPLIT + uint32_t pages = 0; +#endif rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1543,11 +1547,14 @@ e1000_setup_rctl(struct e1000_adapter *adapter) * followed by the page buffers. Therefore, skb->data is * sized to hold the largest protocol header. */ - adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2) - && (adapter->netdev->mtu - < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0)); + pages = PAGE_USE_COUNT(adapter->netdev->mtu); + if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) && + PAGE_SIZE <= 16384) + adapter->rx_ps_pages = pages; + else + adapter->rx_ps_pages = 0; #endif - if(adapter->rx_ps) { + if (adapter->rx_ps_pages) { /* Configure extra packet-split registers */ rfctl = E1000_READ_REG(&adapter->hw, RFCTL); rfctl |= E1000_RFCTL_EXTEN; @@ -1559,12 +1566,19 @@ e1000_setup_rctl(struct e1000_adapter *adapter) psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; - psrctl |= PAGE_SIZE >> - E1000_PSRCTL_BSIZE1_SHIFT; - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE2_SHIFT; - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE3_SHIFT; + + switch (adapter->rx_ps_pages) { + case 3: + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE3_SHIFT; + case 2: + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE2_SHIFT; + case 1: + psrctl |= PAGE_SIZE >> + E1000_PSRCTL_BSIZE1_SHIFT; + break; + } E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl); } @@ -1590,7 +1604,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) int i; #endif - if(adapter->rx_ps) { + if (adapter->rx_ps_pages) { rdlen = adapter->rx_ring[0].count * sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; @@ -1700,8 +1714,8 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Enable 82571 IPv4 payload checksum for UDP fragments * Must be used in conjunction with packet-split. */ - if((adapter->hw.mac_type > e1000_82547_rev_2) && - (adapter->rx_ps)) { + if ((hw->mac_type >= e1000_82571) && + (adapter->rx_ps_pages)) { rxcsum |= E1000_RXCSUM_IPPCSE; } } else { @@ -1906,7 +1920,7 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter, dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; - for(j = 0; j < PS_PAGE_BUFFERS; j++) { + for(j = 0; j < adapter->rx_ps_pages; j++) { if(!ps_page->ps_page[j]) break; pci_unmap_single(pdev, ps_page_dma->ps_page_dma[j], @@ -3551,7 +3565,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, /* Good Receive */ skb_put(skb, length); - for(j = 0; j < PS_PAGE_BUFFERS; j++) { + for(j = 0; j < adapter->rx_ps_pages; j++) { if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) break; @@ -3572,11 +3586,13 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); skb->protocol = eth_type_trans(skb, netdev); -#ifdef HAVE_RX_ZERO_COPY if(likely(rx_desc->wb.upper.header_status & - E1000_RXDPS_HDRSTAT_HDRSP)) + E1000_RXDPS_HDRSTAT_HDRSP)) { + adapter->rx_hdr_split++; +#ifdef HAVE_RX_ZERO_COPY skb_shinfo(skb)->zero_copy = TRUE; #endif + } #ifdef CONFIG_E1000_NAPI if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, @@ -3740,22 +3756,26 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, rx_desc = E1000_RX_DESC_PS(*rx_ring, i); for(j = 0; j < PS_PAGE_BUFFERS; j++) { - if(unlikely(!ps_page->ps_page[j])) { - ps_page->ps_page[j] = - alloc_page(GFP_ATOMIC); - if(unlikely(!ps_page->ps_page[j])) - goto no_buffers; - ps_page_dma->ps_page_dma[j] = - pci_map_page(pdev, - ps_page->ps_page[j], - 0, PAGE_SIZE, - PCI_DMA_FROMDEVICE); - } - /* Refresh the desc even if buffer_addrs didn't - * change because each write-back erases this info. - */ - rx_desc->read.buffer_addr[j+1] = - cpu_to_le64(ps_page_dma->ps_page_dma[j]); + if (j < adapter->rx_ps_pages) { + if (likely(!ps_page->ps_page[j])) { + ps_page->ps_page[j] = + alloc_page(GFP_ATOMIC); + if (unlikely(!ps_page->ps_page[j])) + goto no_buffers; + ps_page_dma->ps_page_dma[j] = + pci_map_page(pdev, + ps_page->ps_page[j], + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't + * change because each write-back erases + * this info. + */ + rx_desc->read.buffer_addr[j+1] = + cpu_to_le64(ps_page_dma->ps_page_dma[j]); + } else + rx_desc->read.buffer_addr[j+1] = ~0; } skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); -- cgit v1.2.3 From 352c9f854cb197581d7135d1276742fd76b53c25 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:07:24 -0400 Subject: e1000: Added msleep_interruptible delay added msleep_interruptible delay right before returning from diag_test to allow the phy to recover from reset Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 183b583df1d7..ee66947e5043 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1544,6 +1544,7 @@ e1000_diag_test(struct net_device *netdev, data[2] = 0; data[3] = 0; } + msleep_interruptible(4 * 1000); } static void -- cgit v1.2.3 From a7990ba60adc46a808c737443393fdfecdc82593 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:08:19 -0400 Subject: e1000: Flush shadow RAM Flush shadow RAM to save updates to ASF related bits for 82573 controllers. These bits are past the first 63 words of NVM. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 6 ++++-- drivers/net/e1000/e1000_hw.c | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index ee66947e5043..6b9acc7f94a3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -547,8 +547,10 @@ e1000_set_eeprom(struct net_device *netdev, ret_val = e1000_write_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); - /* Update the checksum over the first part of the EEPROM if needed */ - if((ret_val == 0) && first_word <= EEPROM_CHECKSUM_REG) + /* Update the checksum over the first part of the EEPROM if needed + * and flush shadow RAM for 82573 conrollers */ + if((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || + (hw->mac_type == e1000_82573))) e1000_update_eeprom_checksum(hw); kfree(eeprom_buff); diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 7d627dd89a3d..8fc876da43b4 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -717,6 +717,7 @@ e1000_init_hw(struct e1000_hw *hw) default: break; case e1000_82571: + case e1000_82572: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl &= ~E1000_TXDCTL_WTHRESH; ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB; -- cgit v1.2.3 From be2b28ed3bb3dd3952e10fb72623b23c5d8b4795 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 4 Oct 2005 07:13:43 -0400 Subject: e1000: fix warnings --- drivers/net/e1000/e1000_main.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 090229f7a95c..dd79449f9a99 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -777,12 +777,12 @@ e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t ctrl_ext; uint32_t manc, swsm; - - flush_scheduled_work(); #ifdef CONFIG_E1000_NAPI int i; #endif + flush_scheduled_work(); + if(adapter->hw.mac_type >= e1000_82540 && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); @@ -3100,7 +3100,9 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); +#ifdef CONFIG_E1000_MQ int i; +#endif if(unlikely(!icr)) return IRQ_NONE; /* Not our interrupt */ @@ -3128,13 +3130,14 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } else { printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count)); } -#else +#else /* if !CONFIG_E1000_MQ */ if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) __netif_rx_schedule(&adapter->polling_netdev[0]); else e1000_irq_enable(adapter); -#endif -#else +#endif /* CONFIG_E1000_MQ */ + +#else /* if !CONFIG_E1000_NAPI */ /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent. @@ -3158,7 +3161,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); -#endif +#endif /* CONFIG_E1000_NAPI */ return IRQ_HANDLED; } -- cgit v1.2.3 From 96eb549c0c20cf63ca13fac71d9d406701f744a6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Oct 2005 12:20:24 +0100 Subject: [PATCH] AX.25: Delete debug printk from mkiss driver Signed-off-by: Ralf Baechle DL5RB -- drivers/net/hamradio/mkiss.c | 1 - 1 files changed, 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index d9fe64b46f4b..793ae12a2571 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -765,7 +765,6 @@ static int mkiss_ioctl(struct tty_struct *tty, struct file *file, case SIOCSIFHWADDR: { char addr[AX25_ADDR_LEN]; -printk(KERN_INFO "In SIOCSIFHWADDR"); if (copy_from_user(&addr, (void __user *) arg, AX25_ADDR_LEN)) { -- cgit v1.2.3 From d5919586265d36c6694a5d10ba589c02806873b6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Oct 2005 12:22:16 +0100 Subject: [PATCH] AX.25: Convert mkiss.c to DEFINE_RWLOCK Signed-off-by: Ingo Molnar Signed-off-by: Ralf Baechle DL5RB drivers/net/hamradio/mkiss.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 793ae12a2571..331a75c8aee2 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -622,7 +622,7 @@ static void ax_setup(struct net_device *dev) * best way to fix this is to use a rwlock in the tty struct, but for now we * use a single global rwlock for all ttys in ppp line discipline. */ -static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED; +static DEFINE_RWLOCK(disc_data_lock); static struct mkiss *mkiss_get(struct tty_struct *tty) { -- cgit v1.2.3 From 53232803241ae0f26b39897a4d4b37775837de00 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Tue, 4 Oct 2005 07:46:21 -0400 Subject: airo: fix resume Cisco Aironet doesn't resume properly from swsusp, because the resume method confuses a PM_EVENT_* for a PCI power state. It thinks that it is resuming from PCI_D1 and doesn't do the necessary initialization of the card. Signed-off-by: Michal Schmidt --- drivers/net/wireless/airo.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 746456c34df8..cb429e783749 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -5504,12 +5504,13 @@ static int airo_pci_resume(struct pci_dev *pdev) struct net_device *dev = pci_get_drvdata(pdev); struct airo_info *ai = dev->priv; Resp rsp; + pci_power_t prev_state = pdev->current_state; - pci_set_power_state(pdev, 0); + pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0); + pci_enable_wake(pdev, PCI_D0, 0); - if (ai->power.event > 1) { + if (prev_state != PCI_D1) { reset_card(dev, 0); mpi_init_descriptors(ai); setup_card(ai, dev->dev_addr, 0); -- cgit v1.2.3 From dbc2309d90b59fbb2676dc2e39150aa095e8c222 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Sep 2005 17:50:51 -0400 Subject: [PATCH] s2io: change strncpy length arg to use size of target Use the size of the target array for the length argument to strncpy instead of the size of the source or a magic number. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 4b9f1828845e..eff747cf3113 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -4177,11 +4177,10 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev, { nic_t *sp = dev->priv; - strncpy(info->driver, s2io_driver_name, sizeof(s2io_driver_name)); - strncpy(info->version, s2io_driver_version, - sizeof(s2io_driver_version)); - strncpy(info->fw_version, "", 32); - strncpy(info->bus_info, pci_name(sp->pdev), 32); + strncpy(info->driver, s2io_driver_name, sizeof(info->driver)); + strncpy(info->version, s2io_driver_version, sizeof(info->version)); + strncpy(info->fw_version, "", sizeof(info->fw_version)); + strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info)); info->regdump_len = XENA_REG_SPACE; info->eedump_len = XENA_EEPROM_SPACE; info->testinfo_len = S2IO_TEST_LEN; -- cgit v1.2.3 From 6c1792f4e8cf2ca03a8dd5ec4b162b9219e9268a Mon Sep 17 00:00:00 2001 From: John Linville Date: Tue, 4 Oct 2005 07:51:45 -0400 Subject: [netdrvr s2io] Add a MODULE_VERSION entry --- drivers/net/s2io.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index eff747cf3113..fcf61107046e 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -65,9 +65,11 @@ #include "s2io.h" #include "s2io-regs.h" +#define DRV_VERSION "Version 2.0.9.1" + /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.9.1"; +static char s2io_driver_version[] = DRV_VERSION; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -5635,6 +5637,8 @@ static void s2io_init_pci(nic_t * sp) MODULE_AUTHOR("Raghavendra Koushik "); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + module_param(tx_fifo_num, int, 0); module_param(rx_ring_num, int, 0); module_param_array(tx_fifo_len, uint, NULL, 0); @@ -6013,7 +6017,7 @@ Defaulting to INTA\n"); if (sp->device_type & XFRAME_II_DEVICE) { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), %s", + DBG_PRINT(ERR_DBG, "(rev %d), Version %s", get_xena_rev_id(sp->pdev), s2io_driver_version); #ifdef CONFIG_2BUFF_MODE @@ -6048,7 +6052,7 @@ Defaulting to INTA\n"); } else { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), %s", + DBG_PRINT(ERR_DBG, "(rev %d), Version %s", get_xena_rev_id(sp->pdev), s2io_driver_version); #ifdef CONFIG_2BUFF_MODE -- cgit v1.2.3 From 075897ce3b1027fccb98f36dd1f18c07f5c374ef Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Sep 2005 17:50:53 -0400 Subject: [PATCH] bonding: replicate IGMP traffic in activebackup mode Replicate IGMP frames across all slaves in activebackup mode. This ensures fail-over is rapid for multicast traffic as well. Otherwise, multicast traffic will be lost until the next IGMP membership report poll timeout. This is conceptually similar to the treatment of IGMP traffic in bond_alb_xmit. In that case, IGMP traffic transmitted on any slave is re-routed to the active slave in order to ensure that multicast traffic continues to be directed to the active receiver. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 53 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index fd62e43a3510..2c9e63a14596 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4240,6 +4240,39 @@ out: return 0; } +static void bond_activebackup_xmit_copy(struct sk_buff *skb, + struct bonding *bond, + struct slave *slave) +{ + struct sk_buff *skb2 = skb_copy(skb, GFP_ATOMIC); + struct ethhdr *eth_data; + u8 *hwaddr; + int res; + + if (!skb2) { + printk(KERN_ERR DRV_NAME ": Error: " + "bond_activebackup_xmit_copy(): skb_copy() failed\n"); + return; + } + + skb2->mac.raw = (unsigned char *)skb2->data; + eth_data = eth_hdr(skb2); + + /* Pick an appropriate source MAC address */ + hwaddr = slave->perm_hwaddr; + if (!memcmp(eth_data->h_source, hwaddr, ETH_ALEN)) + hwaddr = bond->curr_active_slave->perm_hwaddr; + + /* Set source MAC address appropriately */ + memcpy(eth_data->h_source, hwaddr, ETH_ALEN); + + res = bond_dev_queue_xmit(bond, skb2, slave->dev); + if (res) + dev_kfree_skb(skb2); + + return; +} + /* * in active-backup mode, we know that bond->curr_active_slave is always valid if * the bond has a usable interface. @@ -4256,10 +4289,26 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d goto out; } - if (bond->curr_active_slave) { /* one usable interface */ - res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev); + if (!bond->curr_active_slave) + goto out; + + /* Xmit IGMP frames on all slaves to ensure rapid fail-over + for multicast traffic on snooping switches */ + if (skb->protocol == __constant_htons(ETH_P_IP) && + skb->nh.iph->protocol == IPPROTO_IGMP) { + struct slave *slave, *active_slave; + int i; + + active_slave = bond->curr_active_slave; + bond_for_each_slave_from_to(bond, slave, i, active_slave->next, + active_slave->prev) + if (IS_UP(slave->dev) && + (slave->link == BOND_LINK_UP)) + bond_activebackup_xmit_copy(skb, bond, slave); } + res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev); + out: if (res) { /* no suitable interface, frame not sent */ -- cgit v1.2.3 From 47a8659380d40d5c0786ddb62a89b3f7f1392430 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Oct 2005 08:09:19 -0400 Subject: libata: bitmask based pci init functions for one or two ports This redoes the n_ports logic I proposed before as a bitmask. ata_pci_init_native_mode is now used with a mask allowing for mixed mode stuff later on. ata_pci_init_legacy_port is called with port number and does one port now not two. Instead it is called twice by the ata init logic which cleans both of them up. There are stil limits in the original code left over - IRQ/port mapping for legacy mode should be arch specific values - You can have one legacy mode IDE adapter per PCI root bridge on some systems - Doesn't handle mixed mode devices yet (but is now a lot closer to it) --- drivers/scsi/libata-core.c | 133 ++++++++++++++++++++++++++------------------- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- include/linux/libata.h | 6 +- 6 files changed, 85 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 03d422e99e58..82ec7f30bf3f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4363,85 +4363,87 @@ void ata_pci_host_stop (struct ata_host_set *host_set) * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present * * Utility function which allocates and initializes an * ata_probe_ent structure for a standard dual-port * PIO-based IDE controller. The returned ata_probe_ent * structure can be passed to ata_device_add(). The returned * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. */ struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) { struct ata_probe_ent *probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + if (!probe_ent) return NULL; - probe_ent->n_ports = 2; probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; - probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8; + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } - ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent->port[1]); + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + probe_ent->n_ports = p; return probe_ent; } -static struct ata_probe_ent * -ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, - struct ata_probe_ent **ppe2) +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num) { - struct ata_probe_ent *probe_ent, *probe_ent2; + struct ata_probe_ent *probe_ent; probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; - probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]); - if (!probe_ent2) { - kfree(probe_ent); - return NULL; - } - - probe_ent->n_ports = 1; - probe_ent->irq = 14; - probe_ent->hard_port_no = 0; + probe_ent->legacy_mode = 1; - - probe_ent2->n_ports = 1; - probe_ent2->irq = 15; - - probe_ent2->hard_port_no = 1; - probe_ent2->legacy_mode = 1; - - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent2->port[0].cmd_addr = 0x170; - probe_ent2->port[0].altstatus_addr = - probe_ent2->port[0].ctl_addr = 0x376; - probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8; - + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; + + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent2->port[0]); - - *ppe2 = probe_ent2; return probe_ent; } @@ -4470,7 +4472,7 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -4487,7 +4489,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: support transitioning to native mode? */ + /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) @@ -4495,11 +4497,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* FIXME... */ - if ((!legacy_mode) && (n_ports > 1)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n"); - return -EINVAL; + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ } + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + rc = pci_enable_device(pdev); if (rc) return rc; @@ -4510,6 +4521,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } + /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { if (!request_region(0x1f0, 8, "libata")) { struct resource *conflict, res; @@ -4554,10 +4566,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2); - } else - probe_ent = ata_pci_init_native_mode(pdev, port); - if (!probe_ent) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port, 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { rc = -ENOMEM; goto err_out_regions; } diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index c05653c7779d..749ff92d8c63 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -405,7 +405,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; ppi = &nv_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) goto err_out_regions; diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index b227e51d12f4..0761a3234fcf 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -263,7 +263,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &sis_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 4c9fb8b71be1..9c06f2abe7f7 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -202,7 +202,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &uli_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 128b996b07b7..565872479b9a 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -212,7 +212,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) struct ata_probe_ent *probe_ent; struct ata_port_info *ppi = &svia_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; diff --git a/include/linux/libata.h b/include/linux/libata.h index 4739a75b983d..4d45179872cc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -155,6 +155,10 @@ enum { ATA_SHIFT_UDMA = 0, ATA_SHIFT_MWDMA = 8, ATA_SHIFT_PIO = 11, + + /* Masks for port functions */ + ATA_PORT_PRIMARY = (1 << 0), + ATA_PORT_SECONDARY = (1 << 1), }; enum hsm_task_states { @@ -458,7 +462,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port); +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); #endif /* CONFIG_PCI */ -- cgit v1.2.3 From e2608361be343e6220e0a87e04ff224eb037df31 Mon Sep 17 00:00:00 2001 From: Mateusz Berezecki Date: Tue, 4 Oct 2005 08:14:00 -0400 Subject: [wireless ipw2200] remove redundant return statement --- drivers/net/wireless/ipw2200.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 7ea9bd58f65f..de4e6c23e4b8 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -5318,8 +5318,6 @@ static int ipw_wx_set_freq(struct net_device *dev, IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m); return ipw_set_channel(priv, (u8) fwrq->m); - - return 0; } static int ipw_wx_get_freq(struct net_device *dev, -- cgit v1.2.3 From c187c4b58a9caff660a4c8ae39d0def88cc449af Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:46:51 -0400 Subject: libata: minor whitespace, comment, debug message updates --- drivers/scsi/libata-scsi.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 03b7a6dd95fe..d67c3fc98f7b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -589,7 +589,8 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) head = track % dev->heads; sect = (u32)block % dev->sectors + 1; - DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect); + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); /* Check whether the converted CHS can fit. Cylinder: 0-65535 @@ -665,6 +666,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) block |= ((u64)scsicmd[3]); n_block |= ((u32)scsicmd[4]); + + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ if (!n_block) n_block = 256; @@ -692,7 +697,11 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* Check and compose ATA command */ if (!n_block) - /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */ + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + */ return 1; if (lba) { @@ -715,7 +724,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->device |= (block >> 24) & 0xf; } - + qc->nsect = n_block; tf->nsect = n_block & 0xff; @@ -731,23 +740,23 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for CHS addressing. */ if ((block >> 28) || (n_block > 256)) return 1; - + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; head = track % dev->heads; sect = (u32)block % dev->sectors + 1; - DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", + DPRINTK("block %u track %u cyl %u head %u sect %u\n", (u32)block, track, cyl, head, sect); - + /* Check whether the converted CHS can fit. Cylinder: 0-65535 Head: 0-15 Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) return 1; - + qc->nsect = n_block; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ tf->lbal = sect; -- cgit v1.2.3 From 3aef52311bcb1f88aa5c786302f1ae14a787f61e Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:47:43 -0400 Subject: [libata scsi] tidy up SCSI lba and xfer len calculations move the redundant SCSI lba and transfer length calculation code from ata_scsi_verify_xlat() and ata_scsi_rw_xlat() to common functions. --- drivers/scsi/libata-scsi.c | 179 +++++++++++++++++++++++++++++---------------- 1 file changed, 115 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index d67c3fc98f7b..22434e0d4e75 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -487,6 +487,99 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) return 0; } +/** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + /** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile @@ -508,38 +601,16 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 block = 0; - u32 n_block = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[0] == VERIFY) { - block |= ((u64)scsicmd[2]) << 24; - block |= ((u64)scsicmd[3]) << 16; - block |= ((u64)scsicmd[4]) << 8; - block |= ((u64)scsicmd[5]); - - n_block |= ((u32)scsicmd[7]) << 8; - n_block |= ((u32)scsicmd[8]); - } - - else if (scsicmd[0] == VERIFY_16) { - block |= ((u64)scsicmd[2]) << 56; - block |= ((u64)scsicmd[3]) << 48; - block |= ((u64)scsicmd[4]) << 40; - block |= ((u64)scsicmd[5]) << 32; - block |= ((u64)scsicmd[6]) << 24; - block |= ((u64)scsicmd[7]) << 16; - block |= ((u64)scsicmd[8]) << 8; - block |= ((u64)scsicmd[9]); - - n_block |= ((u32)scsicmd[10]) << 24; - n_block |= ((u32)scsicmd[11]) << 16; - n_block |= ((u32)scsicmd[12]) << 8; - n_block |= ((u32)scsicmd[13]); - } - + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); else return 1; @@ -636,8 +707,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct ata_device *dev = qc->dev; unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; - u64 block = 0; - u32 n_block = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; @@ -651,46 +722,26 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } /* Calculate the SCSI LBA and transfer length. */ - if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - block |= ((u64)scsicmd[2]) << 24; - block |= ((u64)scsicmd[3]) << 16; - block |= ((u64)scsicmd[4]) << 8; - block |= ((u64)scsicmd[5]); - - n_block |= ((u32)scsicmd[7]) << 8; - n_block |= ((u32)scsicmd[8]); - - VPRINTK("ten-byte command\n"); - } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - block |= ((u64)scsicmd[2]) << 8; - block |= ((u64)scsicmd[3]); - - n_block |= ((u32)scsicmd[4]); + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); /* for 6-byte r/w commands, transfer length 0 * means 256 blocks of data, not 0 block. */ if (!n_block) n_block = 256; - - VPRINTK("six-byte command\n"); - } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - block |= ((u64)scsicmd[2]) << 56; - block |= ((u64)scsicmd[3]) << 48; - block |= ((u64)scsicmd[4]) << 40; - block |= ((u64)scsicmd[5]) << 32; - block |= ((u64)scsicmd[6]) << 24; - block |= ((u64)scsicmd[7]) << 16; - block |= ((u64)scsicmd[8]) << 8; - block |= ((u64)scsicmd[9]); - - n_block |= ((u32)scsicmd[10]) << 24; - n_block |= ((u32)scsicmd[11]) << 16; - n_block |= ((u32)scsicmd[12]) << 8; - n_block |= ((u32)scsicmd[13]); - - VPRINTK("sixteen-byte command\n"); - } else { + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + break; + default: DPRINTK("no-byte command\n"); return 1; } -- cgit v1.2.3 From 9d5b13021375cad2d64d56105e5f4b5f1509ced2 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:48:17 -0400 Subject: [libata scsi] add CHS support to ata_scsi_start_stop_xlat() --- drivers/scsi/libata-scsi.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 22434e0d4e75..4982e6eff700 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -435,10 +435,21 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, return 1; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; + + if (qc->dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { tf->nsect = 0; /* time period value (0 implies now) */ -- cgit v1.2.3 From 54dac83c426a1a03bd139c5ac7e938890bd2693e Mon Sep 17 00:00:00 2001 From: Jeff Raubitschek Date: Tue, 4 Oct 2005 10:21:19 -0400 Subject: [libata passthru] fix leak on error --- drivers/scsi/libata-scsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 98057563a3cc..75cb685e320b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -116,8 +116,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) if (args[3]) { argsize = SECTOR_SIZE * args[3]; argbuf = kmalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) - return -ENOMEM; + if (argbuf == NULL) { + rc = -ENOMEM; + goto error; + } scsi_cmd[1] = (4 << 1); /* PIO Data-in */ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, -- cgit v1.2.3 From 67846b30171cc4d706125f630193a76a26bb334a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 02:58:32 -0400 Subject: libata: add ata_ratelimit(), use it in AHCI driver irq handler --- drivers/scsi/ahci.c | 31 +++++++++++++++++++++++++------ drivers/scsi/libata-core.c | 23 +++++++++++++++++++++++ include/linux/libata.h | 2 ++ 3 files changed, 50 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c2c8fa828e24..5ec866b00479 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -672,17 +672,36 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap; - u32 tmp; - VPRINTK("port %u\n", i); + if (!(irq_stat & (1 << i))) + continue; + ap = host_set->ports[i]; - tmp = irq_stat & (1 << i); - if (tmp && ap) { + if (ap) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (ahci_host_intr(ap, qc)) - irq_ack |= (1 << i); + if (!ahci_host_intr(ap, qc)) + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): unhandled interrupt on port %u\n", + pci_name(pdev), i); + } + + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): interrupt on disabled port %u\n", + pci_name(pdev), i); + } } + + irq_ack |= (1 << i); } if (irq_ack) { diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f0894bfa908b..ceffaef37d17 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include "scsi.h" #include "scsi_priv.h" @@ -4688,6 +4689,27 @@ static void __exit ata_exit(void) module_init(ata_init); module_exit(ata_exit); +static unsigned long ratelimit_time; +static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED; + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -4729,6 +4751,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); diff --git a/include/linux/libata.h b/include/linux/libata.h index 4d45179872cc..7929cfc9318d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -410,6 +410,8 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn extern int ata_scsi_error(struct Scsi_Host *host); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int ata_ratelimit(void); + /* * Default driver ops implementations */ -- cgit v1.2.3 From a15dbeb4772626a015337dea06da67095aec3862 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 15:02:14 -0400 Subject: libata: ATAPI command completion tweaks and notes 1) note urgent bug, that completes command twice 2) only fix up INQUIRY data if the SCSI version is zero (typically indicates ATAPI MMC-ish device) 3) if there is a problem on the ATA bus, don't bother with REQUEST SENSE, just directly handle the error based on Status/Error registers. --- drivers/scsi/libata-scsi.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 45ebe9fd52ea..1a1ef3429e55 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1483,9 +1483,18 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) { + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) + ata_to_sense_error(qc, drv_stat); + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); + /* FIXME: command completion with check condition + * but no sense causes the error handler to run, + * which then issues REQUEST SENSE, fills in the sense + * buffer, and completes the command (for the second + * time). We need to issue REQUEST SENSE some other + * way, to avoid completing the command twice. + */ cmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); @@ -1499,10 +1508,26 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) unsigned int buflen; buflen = ata_scsi_rbuf_get(cmd, &buf); - buf[2] = 0x5; - buf[3] = (buf[3] & 0xf0) | 2; + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + /* FIXME: do we ever override EVPD pages and the like, with + * this code? + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + ata_scsi_rbuf_put(cmd, buf); } + cmd->result = SAM_STAT_GOOD; } -- cgit v1.2.3 From a939c9631527053aa38aa8795a6f7203c7f20b69 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 17:09:16 -0400 Subject: libata: move atapi_request_sense() to libata-scsi module No content changes, just moving code around. --- drivers/scsi/libata-core.c | 49 +--------------------------------------------- drivers/scsi/libata-scsi.c | 46 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 3 +++ 3 files changed, 50 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ceffaef37d17..f731bbdd4236 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -71,7 +71,6 @@ static int fgb(u32 bitmap); static int ata_choose_xfer_mode(struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); static void __ata_qc_complete(struct ata_queued_cmd *qc); static unsigned int ata_unique_id = 1; @@ -3015,52 +3014,6 @@ fsm_start: goto fsm_start; } -static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd) -{ - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; - - DPRINTK("ATAPI request sense\n"); - - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, ap->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - if (rc) - ata_port_disable(ap); - else - wait_for_completion(&wait); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -3254,7 +3207,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) +int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) { return 0; } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1a1ef3429e55..c58a7a19780f 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1479,6 +1479,52 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } +void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + DPRINTK("ATAPI request sense\n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, ap->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index c7a1fa1c9abc..a4b55dc9c698 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,6 +39,7 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; +extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -51,6 +52,8 @@ extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd); extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); -- cgit v1.2.3 From afb0edd922c7ed6e73678730921dfcccebec17e8 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Wed, 5 Oct 2005 17:08:42 -0400 Subject: [PATCH] libata: Marvell spinlock fixes and simplification This should fix up lockups that people were seeing due to improper spinlock placement. Also, the start/stop DMA routines put guarded trust in the cached state of DMA. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 58 +++++++++++++++++++++----------------------------- 1 file changed, 24 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ecda7df21142..c3084f8b3ee7 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.22" +#define DRV_VERSION "0.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -406,40 +406,30 @@ static void mv_irq_clear(struct ata_port *ap) { } -static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp, - struct ata_port *ap) +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) { - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - - writelfl(EDMA_EN, base + EDMA_CMD_OFS); - pp->pp_flags |= MV_PP_FLAG_EDMA_EN; - - spin_unlock_irqrestore(&ap->host_set->lock, flags); + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } + assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); } static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; - unsigned long flags; u32 reg; int i; - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (!(MV_PP_FLAG_EDMA_DS_ACT & pp->pp_flags) && - ((MV_PP_FLAG_EDMA_EN & pp->pp_flags) || - (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)))) { - /* Disable EDMA if we're not already trying to disable it - * and it is currently active. The disable bit auto clears. + if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + /* Disable EDMA if active. The disable bit auto clears. */ - pp->pp_flags |= MV_PP_FLAG_EDMA_DS_ACT; writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + } /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { @@ -450,12 +440,9 @@ static void mv_stop_dma(struct ata_port *ap) udelay(100); } - spin_lock_irqsave(&ap->host_set->lock, flags); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_DS_ACT; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - if (EDMA_EN & reg) { printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + /* FIXME: Consider doing a reset here to recover */ } } @@ -716,8 +703,11 @@ static void mv_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + spin_lock_irqsave(&ap->host_set->lock, flags); mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); ap->private_data = NULL; dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); @@ -867,11 +857,7 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) mv_inc_q_index(&pp->req_producer); /* now incr producer index */ - if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { - /* turn on EDMA if not already on */ - mv_start_dma(port_mmio, pp, qc->ap); - } - assert(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + mv_start_dma(port_mmio, pp); /* and write the request in pointer to kick the EDMA to life */ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; @@ -921,8 +907,12 @@ static void mv_err_intr(struct ata_port *ap) serr = scr_read(ap, SCR_ERROR); scr_write_flush(ap, SCR_ERROR, serr); } - DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n", - ap->port_no, edma_err_cause, serr); + if (EDMA_ERR_SELF_DIS & edma_err_cause) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " + "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -1034,7 +1024,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", readl(mmio + PCI_IRQ_CAUSE_OFS)); - VPRINTK("All regs @ PCI error\n"); + DPRINTK("All regs @ PCI error\n"); mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); -- cgit v1.2.3 From 05b308e1df6d9d673daedb517969241f41278b52 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Wed, 5 Oct 2005 17:08:53 -0400 Subject: [PATCH] libata: Marvell function headers adds helpful function header comments. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 225 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 219 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index c3084f8b3ee7..84b488f81c75 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.23" +#define DRV_VERSION "0.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -406,6 +406,17 @@ static void mv_irq_clear(struct ata_port *ap) { } +/** + * mv_start_dma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) { if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { @@ -415,6 +426,16 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); } +/** + * mv_stop_dma - Disable eDMA engine + * @ap: ATA channel to manipulate + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -561,7 +582,15 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -/* This routine only applies to 6xxx parts */ +/** + * mv_global_soft_reset - Perform the 6xxx global soft reset + * @mmio_base: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; @@ -617,6 +646,16 @@ done: return rc; } +/** + * mv_host_stop - Host specific cleanup/stop routine. + * @host_set: host data structure + * + * Disable ints, cleanup host memory, call general purpose + * host_stop. + * + * LOCKING: + * Inherited from caller. + */ static void mv_host_stop(struct ata_host_set *host_set) { struct mv_host_priv *hpriv = host_set->private_data; @@ -631,6 +670,16 @@ static void mv_host_stop(struct ata_host_set *host_set) ata_host_stop(host_set); } +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -699,6 +748,15 @@ static int mv_port_start(struct ata_port *ap) return 0; } +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host_set lock to protect the DMA stop. + */ static void mv_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -714,6 +772,15 @@ static void mv_port_stop(struct ata_port *ap) kfree(pp); } +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ static void mv_fill_sg(struct ata_queued_cmd *qc) { struct mv_port_priv *pp = qc->ap->private_data; @@ -748,6 +815,18 @@ static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) (last ? CRQB_CMD_LAST : 0); } +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ static void mv_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -830,6 +909,18 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) mv_fill_sg(qc); } +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ static int mv_qc_issue(struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(qc->ap); @@ -867,6 +958,19 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) return 0; } +/** + * mv_get_crpb_status - get status from most recently completed cmd + * @ap: ATA channel to manipulate + * + * This routine is for use when the port is in DMA mode, when it + * will be using the CRPB (command response block) method of + * returning command completion information. We assert indices + * are good, grab status, and bump the response consumer index to + * prove that we're up to date. + * + * LOCKING: + * Inherited from caller. + */ static u8 mv_get_crpb_status(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -896,6 +1000,19 @@ static u8 mv_get_crpb_status(struct ata_port *ap) return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); } +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * + * In most cases, just clear the interrupt and move on. However, + * some cases require an eDMA reset, which is done right before + * the COMRESET in mv_phy_reset(). The SERR case requires a + * clear of pending errors in the SATA SERROR register. Finally, + * if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ static void mv_err_intr(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -923,7 +1040,22 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC */ +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host_set: host specific structure + * @relevant: port error bits relevant to this host controller + * @hc: which host controller we're to look at + * + * Read then write clear the HC interrupt status then walk each + * port connected to the HC and see if it needs servicing. Port + * success ints are reported in the HC interrupt status reg, the + * port error ints are reported in the higher level main + * interrupt status register and thus are passed in via the + * 'relevant' argument. + * + * LOCKING: + * Inherited from caller. + */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) { @@ -993,6 +1125,21 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("EXIT\n"); } +/** + * mv_interrupt - + * @irq: unused + * @dev_instance: private data; in this case the host structure + * @regs: unused + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host_set lock while processing pending + * interrupts. + */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { @@ -1035,14 +1182,32 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +/** + * mv_check_err - Return the error shadow register to caller. + * @ap: ATA channel to manipulate + * + * Marvell requires DMA to be stopped before accessing shadow + * registers. So we do that, then return the needed register. + * + * LOCKING: + * Inherited from caller. FIXME: protect mv_stop_dma with lock? + */ static u8 mv_check_err(struct ata_port *ap) { mv_stop_dma(ap); /* can't read shadow regs if DMA on */ return readb((void __iomem *) ap->ioaddr.error_addr); } -/* Part of this is taken from __sata_phy_reset and modified to not sleep - * since this routine gets called from interrupt level. +/** + * mv_phy_reset - Perform eDMA reset followed by COMRESET + * @ap: ATA channel to manipulate + * + * Part of this is taken from __sata_phy_reset and modified to + * not sleep since this routine gets called from interrupt level. + * + * LOCKING: + * Inherited from caller. This is coded to safe to call at + * interrupt level, i.e. it does not sleep. */ static void mv_phy_reset(struct ata_port *ap) { @@ -1105,6 +1270,16 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } +/** + * mv_eng_timeout - Routine called by libata when SCSI times out I/O + * @ap: ATA channel to manipulate + * + * Intent is to clear all pending error conditions, reset the + * chip/bus, fail the command, and move on. + * + * LOCKING: + * This routine holds the host_set lock while failing the command. + */ static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; @@ -1140,6 +1315,18 @@ static void mv_eng_timeout(struct ata_port *ap) } } +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; @@ -1177,6 +1364,16 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +/** + * mv_host_init - Perform some early initialization of the host. + * @probe_ent: early data struct representing the host + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_host_init(struct ata_probe_ent *probe_ent) { int rc = 0, n_hc, port, hc; @@ -1226,7 +1423,15 @@ done: return rc; } -/* FIXME: complete this */ +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @probe_ent: early data struct representing the host + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ static void mv_print_info(struct ata_probe_ent *probe_ent) { struct pci_dev *pdev = to_pci_dev(probe_ent->dev); @@ -1253,6 +1458,14 @@ static void mv_print_info(struct ata_probe_ent *probe_ent) scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); } +/** + * mv_init_one - handle a positive probe of a Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; -- cgit v1.2.3 From 8a70f8dc08dd40b7f8ac77280eaa99a8c6bc46f4 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 17:19:47 -0400 Subject: [libata sata_mv] fix warning shuffle ifdef location to fix the following warning: drivers/scsi/sata_mv.c:471: warning: 'mv_dump_mem' defined but not used --- drivers/scsi/sata_mv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 84b488f81c75..d457f5673476 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -467,9 +467,9 @@ static void mv_stop_dma(struct ata_port *ap) } } +#ifdef ATA_DEBUG static void mv_dump_mem(void __iomem *start, unsigned bytes) { -#ifdef ATA_DEBUG int b, w; for (b = 0; b < bytes; ) { DPRINTK("%p: ", start + b); @@ -479,8 +479,9 @@ static void mv_dump_mem(void __iomem *start, unsigned bytes) } printk("\n"); } -#endif } +#endif + static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) { #ifdef ATA_DEBUG -- cgit v1.2.3 From e12669e774be403c84baa651306d305752a35cd8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 18:39:23 -0400 Subject: libata: minor cleanups A few code shuffles, to make merging future code easier. Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas Gilbert. --- drivers/scsi/libata-core.c | 6 +++--- drivers/scsi/libata-scsi.c | 12 ++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f731bbdd4236..d568914c4344 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3131,14 +3131,14 @@ void ata_eng_timeout(struct ata_port *ap) DPRINTK("ENTER\n"); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { + if (qc) + ata_qc_timeout(qc); + else { printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); goto out; } - ata_qc_timeout(qc); - out: DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c58a7a19780f..1c3a10fb3c44 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -225,7 +225,7 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Is this an error we can process/parse @@ -1468,7 +1468,7 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; cmd->sense_buffer[0] = 0x70; cmd->sense_buffer[2] = ILLEGAL_REQUEST; @@ -1529,8 +1529,11 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; + VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) ata_to_sense_error(qc, drv_stat); + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); @@ -1546,7 +1549,9 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) qc->scsidone(cmd); return 1; - } else { + } + + else { u8 *scsicmd = cmd->cmnd; if (scsicmd[0] == INQUIRY) { @@ -1578,7 +1583,6 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) } qc->scsidone(cmd); - return 0; } /** -- cgit v1.2.3 From ad6e90f6d0c4243cc35e07e2681a3323af533ce4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:29 +0900 Subject: [PATCH] sil24: ignore non-error exception irqs 01_sil24_ignore-non-error-exception-irqs.patch Do not error-finish commands for non-error exception irqs - just ignore them. This is taken from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index d8a2f5f04e82..571302dc48a3 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -489,12 +489,21 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + + if (!(irq_stat & PORT_IRQ_ERROR)) { + /* ignore non-completion, non-error irqs for now */ + printk(KERN_WARNING DRV_NAME + "ata%u: non-error exception irq (irq_stat %x)\n", + ap->id, irq_stat); + return; + } + cmd_err = readl(port + PORT_CMD_ERR); sstatus = readl(port + PORT_SSTATUS); serror = readl(port + PORT_SERROR); /* Clear IRQ/errors */ - writel(irq_stat, port + PORT_IRQ_STAT); if (cmd_err) writel(cmd_err, port + PORT_CMD_ERR); if (serror) -- cgit v1.2.3 From 46b93e7bce80a08ea07e250d03b0b596cbd32595 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:34 +0900 Subject: [PATCH] sil24: remove CMDERR clearing 02_sil24_remove-cmderr-clearing.patch CMDERR register doesn't need clearing. This is from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 571302dc48a3..032d9c093979 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -502,10 +502,6 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) cmd_err = readl(port + PORT_CMD_ERR); sstatus = readl(port + PORT_SSTATUS); serror = readl(port + PORT_SERROR); - - /* Clear IRQ/errors */ - if (cmd_err) - writel(cmd_err, port + PORT_CMD_ERR); if (serror) writel(serror, port + PORT_SERROR); -- cgit v1.2.3 From 6a575fa969beeddd0859f9e9d26ab16c6a0d8d6a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:39 +0900 Subject: [PATCH] sil24: implement proper TF register reading & caching 03_sil24_add-tf-reading.patch This patch implements proper TF register reading back and caching and bumps up version to 0.22. This is taken from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 50 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 50 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 032d9c093979..b65194c755f8 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.21" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ #define NR_PORTS 4 @@ -216,6 +216,7 @@ struct sil24_cmd_block { struct sil24_port_priv { struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ + struct ata_taskfile tf; /* Cached taskfile registers */ }; /* ap->host_set->private_data */ @@ -322,14 +323,25 @@ static struct ata_port_info sil24_port_info[] = { }, }; +static inline void sil24_update_tf(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = (void *)ap->ioaddr.cmd_addr; + struct sil24_prb *prb = port; + + ata_tf_from_fis(prb->fis, &pp->tf); +} + static u8 sil24_check_status(struct ata_port *ap) { - return ATA_DRDY; + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.command; } static u8 sil24_check_err(struct ata_port *ap) { - return 0; + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.feature; } static int sil24_scr_map[] = { @@ -485,6 +497,7 @@ static void sil24_eng_timeout(struct ata_port *ap) static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; void *port = (void *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; @@ -509,8 +522,22 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { + /* + * Device is reporting error, tf registers are valid. + */ + sil24_update_tf(ap); + } else { + /* + * Other errors. libata currently doesn't have any + * mechanism to report these errors. Just turn on + * ATA_ERR. + */ + pp->tf.command = ATA_ERR; + } + if (qc) - ata_qc_complete(qc, ATA_ERR); + ata_qc_complete(qc, pp->tf.command); sil24_reset_controller(ap); } @@ -523,8 +550,19 @@ static inline void sil24_host_intr(struct ata_port *ap) slot_stat = readl(port + PORT_SLOT_STAT); if (!(slot_stat & HOST_SSTAT_ATTN)) { + struct sil24_port_priv *pp = ap->private_data; + /* + * !HOST_SSAT_ATTN guarantees successful completion, + * so reading back tf registers is unnecessary for + * most commands. TODO: read tf registers for + * commands which require these values on successful + * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER, + * DEVICE RESET and READ PORT MULTIPLIER (any more?). + */ + sil24_update_tf(ap); + if (qc) - ata_qc_complete(qc, 0); + ata_qc_complete(qc, pp->tf.command); } else sil24_error_intr(ap, slot_stat); } @@ -579,6 +617,8 @@ static int sil24_port_start(struct ata_port *ap) return -ENOMEM; memset(pp, 0, sizeof(*pp)); + pp->tf.command = ATA_DRDY; + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); if (!cb) { kfree(pp); -- cgit v1.2.3 From 0e5dec478cfff2c29e68d1108ff828fa321adc59 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 6 Oct 2005 09:40:20 -0400 Subject: [libata passthru] add (DRIVER_SENSE << 24) to all check-conditions --- drivers/scsi/libata-scsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 75cb685e320b..1b00bc618e15 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -500,7 +500,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Read the controller registers. @@ -575,7 +575,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Read the controller registers. @@ -1638,7 +1638,7 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; cmd->sense_buffer[0] = 0x70; cmd->sense_buffer[2] = ILLEGAL_REQUEST; -- cgit v1.2.3 From 7f726d125d570f38b9e7c8a2decebc39c0a343dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 7 Oct 2005 01:43:19 +0900 Subject: [PATCH] sil24: implement tf_read callback Hello, guys. This patch implements ->tf_read callback for sil24. It didn't use to be necessary but new ata_gen_fixed_sense now makes use of ->tf_read callback. This patch is taken from Edward Falk's driver. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index b65194c755f8..693330bdc821 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -229,6 +229,7 @@ static u8 sil24_check_status(struct ata_port *ap); static u8 sil24_check_err(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void sil24_phy_reset(struct ata_port *ap); static void sil24_qc_prep(struct ata_queued_cmd *qc); static int sil24_qc_issue(struct ata_queued_cmd *qc); @@ -280,6 +281,8 @@ static struct ata_port_operations sil24_ops = { .check_err = sil24_check_err, .dev_select = ata_noop_dev_select, + .tf_read = sil24_tf_read, + .phy_reset = sil24_phy_reset, .qc_prep = sil24_qc_prep, @@ -372,6 +375,12 @@ static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) } } +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sil24_port_priv *pp = ap->private_data; + *tf = pp->tf; +} + static void sil24_phy_reset(struct ata_port *ap) { __sata_phy_reset(ap); -- cgit v1.2.3 From 845c5834d0aa60eb1588397696e7fabbaab2d3b0 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 9 Oct 2005 08:55:41 -0400 Subject: [libata scsi] add ata_scsi_set_sense helper - add extern ata_scsi_set_sense() to build SCSI fixed sense data and corresponding SCSI status Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 28 ++++++++++++++++++++++++++++ drivers/scsi/libata.h | 2 ++ 2 files changed, 30 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1c3a10fb3c44..bca9a5016b17 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1450,6 +1450,34 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, return 0; } +/** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + /** * ata_scsi_badcmd - End a SCSI request with an error * @cmd: SCSI request to be handled diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index a4b55dc9c698..4622e643ffd3 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -80,6 +80,8 @@ extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq); +extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, + u8 sk, u8 asc, u8 ascq); extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); -- cgit v1.2.3 From ae00651020413bd7eb5fa3bd0abbd78d7cf1abb2 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 9 Oct 2005 09:09:35 -0400 Subject: [libata scsi] improve scsi error handling with ata_scsi_set_sense() - change "xlat" and "fill" actors in libata-scsi so they are responsible for SCSI status and sense data when they return 1. This allows GOOD status or a specialized error to be set. - yield an error for mode sense requests for saved values [sat-r06] - remove static inlines for ata_bad_scsiop() and ata_bad_cdb() which are no longer used Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 184 +++++++++++++++++++++++++++++---------------- drivers/scsi/libata.h | 10 --- 2 files changed, 121 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index bca9a5016b17..c64169ca7ff0 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -49,6 +49,14 @@ static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined @@ -182,7 +190,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; u8 err = 0; - unsigned char *sb = cmd->sense_buffer; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -225,8 +232,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* * Is this an error we can process/parse */ @@ -281,11 +286,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) /* Look for best matches first */ if((sense_table[i][0] & err) == sense_table[i][0]) { - sb[0] = 0x70; - sb[2] = sense_table[i][1]; - sb[7] = 0x0a; - sb[12] = sense_table[i][2]; - sb[13] = sense_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -300,11 +303,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { if(stat_table[i][0] & drv_stat) { - sb[0] = 0x70; - sb[2] = stat_table[i][1]; - sb[7] = 0x0a; - sb[12] = stat_table[i][2]; - sb[13] = stat_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -313,15 +314,12 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); /* additional-sense-code[-qualifier] */ - sb[0] = 0x70; - sb[2] = MEDIUM_ERROR; - sb[7] = 0x0A; if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - sb[12] = 0x11; /* "unrecovered read error" */ - sb[13] = 0x04; + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4); + /* "unrecovered read error" */ } else { - sb[12] = 0x0C; /* "write error - */ - sb[13] = 0x02; /* auto-reallocation failed" */ + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2); + /* "write error - auto-reallocation failed" */ } } @@ -430,9 +428,9 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, ; /* ignore IMMED bit, violates sat-r05 */ } if (scsicmd[4] & 0x2) - return 1; /* LOEJ bit set not supported */ + goto invalid_fld; /* LOEJ bit set not supported */ if (((scsicmd[4] >> 4) & 0xf) != 0) - return 1; /* power conditions not supported */ + goto invalid_fld; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ @@ -464,6 +462,11 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, */ return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; } @@ -623,20 +626,20 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) else if (scsicmd[0] == VERIFY_16) scsi_16_lba_len(scsicmd, &block, &n_block); else - return 1; + goto invalid_fld; if (!n_block) - return 1; + goto nothing_to_do; if (block >= dev_sectors) - return 1; + goto out_of_range; if ((block + n_block) > dev_sectors) - return 1; + goto out_of_range; if (lba48) { if (n_block > (64 * 1024)) - return 1; + goto invalid_fld; } else { if (n_block > 256) - return 1; + goto invalid_fld; } if (lba) { @@ -679,7 +682,7 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) Head: 0-15 Sector: 1-255*/ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - return 1; + goto out_of_range; tf->command = ATA_CMD_VERIFY; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ @@ -690,6 +693,20 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } /** @@ -754,7 +771,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) break; default: DPRINTK("no-byte command\n"); - return 1; + goto invalid_fld; } /* Check and compose ATA command */ @@ -764,13 +781,13 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * However, for ATA R/W commands, sector count 0 means * 256 or 65536 sectors, not 0 sectors as in SCSI. */ - return 1; + goto nothing_to_do; if (lba) { if (lba48) { /* The request -may- be too large for LBA48. */ if ((block >> 48) || (n_block > 65536)) - return 1; + goto out_of_range; tf->hob_nsect = (n_block >> 8) & 0xff; @@ -782,7 +799,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for LBA28. */ if ((block >> 28) || (n_block > 256)) - return 1; + goto out_of_range; tf->device |= (block >> 24) & 0xf; } @@ -801,7 +818,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for CHS addressing. */ if ((block >> 28) || (n_block > 256)) - return 1; + goto out_of_range; /* Convert LBA to CHS */ track = (u32)block / dev->sectors; @@ -817,7 +834,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) Head: 0-15 Sector: 1-255*/ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - return 1; + goto out_of_range; qc->nsect = n_block; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ @@ -828,6 +845,20 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -859,6 +890,12 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * This function sets up an ata_queued_cmd structure for the * SCSI command, and sends that ata_queued_cmd to the hardware. * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -875,7 +912,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc = ata_scsi_qc_new(ap, dev, cmd, done); if (!qc) - return; + goto err_mem; /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || @@ -883,7 +920,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); - goto err_out; + goto err_did; } if (cmd->use_sg) @@ -898,19 +935,28 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc->complete_fn = ata_scsi_qc_complete; if (xlat_func(qc, scsicmd)) - goto err_out; + goto early_finish; /* select device, send command to hardware */ if (ata_qc_issue(qc)) - goto err_out; + goto err_did; VPRINTK("EXIT\n"); return; -err_out: +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return; + +err_did: ata_qc_free(qc); - ata_bad_cdb(cmd, done); - DPRINTK("EXIT - badcmd\n"); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return; } /** @@ -977,7 +1023,8 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * Mapping the response buffer, calling the command's handler, * and handling the handler's return value. This return value * indicates whether the handler wishes the SCSI command to be - * completed successfully, or not. + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -996,12 +1043,9 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); - if (rc) - ata_bad_cdb(cmd, args->done); - else { + if (rc == 0) cmd->result = SAM_STAT_GOOD; - args->done(cmd); - } + args->done(cmd); } /** @@ -1307,8 +1351,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, * in the same manner) */ page_control = scsicmd[2] >> 6; - if ((page_control != 0) && (page_control != 3)) - return 1; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } if (six_byte) output_len = 4; @@ -1339,7 +1391,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, break; default: /* invalid page code */ - return 1; + goto invalid_fld; } if (six_byte) { @@ -1352,6 +1404,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, } return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; } /** @@ -1496,13 +1558,7 @@ void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = ILLEGAL_REQUEST; - cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); done(cmd); } @@ -1871,7 +1927,7 @@ void ata_scsi_simulate(u16 *id, case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else if (scsicmd[2] == 0x00) @@ -1881,7 +1937,7 @@ void ata_scsi_simulate(u16 *id, else if (scsicmd[2] == 0x83) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case MODE_SENSE: @@ -1891,7 +1947,7 @@ void ata_scsi_simulate(u16 *id, case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case READ_CAPACITY: @@ -1902,7 +1958,7 @@ void ata_scsi_simulate(u16 *id, if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case REPORT_LUNS: @@ -1914,7 +1970,9 @@ void ata_scsi_simulate(u16 *id, /* all other commands */ default: - ata_bad_scsiop(cmd, done); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); break; } } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 4622e643ffd3..a18f2ac1d4a1 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -86,14 +86,4 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); -static inline void ata_bad_scsiop(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x20, 0x00); -} - -static inline void ata_bad_cdb(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x24, 0x00); -} - #endif /* __LIBATA_H__ */ -- cgit v1.2.3 From 1fcce839a541ffcd50da99a1bfdfea594be0e3d3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Oct 2005 09:31:33 -0400 Subject: [libata sata_sil24] nit pickings This patch removes unused NR_PORTS macro and adds termination entry to sil24_pci_tbl. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 693330bdc821..dffa13c84639 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -43,8 +43,6 @@ #define DRV_NAME "sata_sil24" #define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ -#define NR_PORTS 4 - /* * Port request block (PRB) 32 bytes */ @@ -244,6 +242,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { } /* terminate list */ }; static struct pci_driver sil24_pci_driver = { -- cgit v1.2.3 From 042c21fd2c3aa553907020131caa553a9da24589 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Oct 2005 09:35:46 -0400 Subject: [libata sata_sil24] add support for 3131/3531 This patch adds support for sil_3131 and sil_3531. Both are identical to 3124 except that they have only one port. Bits 30 and 31 of ata_port_info->host_flags is used to encode available port numbers. Version number is bumped to 0.22. Edward Falk supplied all the necessary information and preliminary patch. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index dffa13c84639..19857814d69f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -196,6 +196,7 @@ enum { /* board id */ BID_SIL3124 = 0, BID_SIL3132 = 1, + BID_SIL3131 = 2, IRQ_STAT_4PORTS = 0xf, }; @@ -242,6 +243,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, { } /* terminate list */ }; @@ -300,13 +303,20 @@ static struct ata_port_operations sil24_ops = { .host_stop = sil24_host_stop, }; +/* + * Use bits 30-31 of host_flags to encode available port numbers. + * Current maxium is 4. + */ +#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) +#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) + static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -317,7 +327,18 @@ static struct ata_port_info sil24_port_info[] = { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3131/sil_3531 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -665,6 +686,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; void *host_base = NULL, *port_base = NULL; @@ -705,12 +727,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - probe_ent->sht = sil24_port_info[board_id].sht; - probe_ent->host_flags = sil24_port_info[board_id].host_flags; - probe_ent->pio_mask = sil24_port_info[board_id].pio_mask; - probe_ent->udma_mask = sil24_port_info[board_id].udma_mask; - probe_ent->port_ops = sil24_port_info[board_id].port_ops; - probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2; + probe_ent->sht = pinfo->sht; + probe_ent->host_flags = pinfo->host_flags; + probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->udma_mask = pinfo->udma_mask; + probe_ent->port_ops = pinfo->port_ops; + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; -- cgit v1.2.3 From e710245bb0f980adfb1dfe850e43761a8117c6be Mon Sep 17 00:00:00 2001 From: Andy Currid Date: Fri, 7 Oct 2005 08:53:39 -0700 Subject: [PATCH] Fix sata_nv handling of NVIDIA MCP51/55 Patch to fix sata_nv handling of NVIDIA MCP51/55 Signed-off-by: Andy Currid Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 749ff92d8c63..9fa2535dd937 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -29,6 +29,8 @@ * NV-specific details such as register offsets, SATA phy location, * hotplug info, etc. * + * 0.09 + * - Fixed bug introduced by 0.08's MCP51 and MCP55 support. * * 0.08 * - Added support for MCP51 and MCP55. @@ -132,9 +134,7 @@ enum nv_host_type GENERIC, NFORCE2, NFORCE3, - CK804, - MCP51, - MCP55 + CK804 }; static struct pci_device_id nv_pci_tbl[] = { @@ -153,13 +153,13 @@ static struct pci_device_id nv_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, -- cgit v1.2.3 From 422fa08e538b649a9b80258950d2f8a202f45f19 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 9 Oct 2005 10:49:34 -0400 Subject: [libata passthru] update ATAPI completion for new error handling --- drivers/scsi/libata-scsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 698203bf4f69..617534b7a25e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1933,7 +1933,12 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) - ata_to_sense_error(qc, drv_stat); + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); -- cgit v1.2.3 From edea3ab58f8edd5f72d31f891ab4f34382e97e3a Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 10 Oct 2005 17:53:58 -0400 Subject: libata: add new driver pdc_adma for PDC ADMA ATA cards --- drivers/scsi/Kconfig | 14 +- drivers/scsi/Makefile | 1 + drivers/scsi/pdc_adma.c | 737 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 749 insertions(+), 3 deletions(-) create mode 100644 drivers/scsi/pdc_adma.c (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index be96cb78e3b5..e2845b442776 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -489,11 +489,11 @@ config SCSI_SATA_NV If unsure, say N. -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" depends on SCSI_SATA && PCI help - This option enables support for Promise Serial ATA TX2/TX4. + This option enables support for Pacific Digital ADMA controllers If unsure, say N. @@ -505,6 +505,14 @@ config SCSI_SATA_QSTOR If unsure, say N. +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on SCSI_SATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + config SCSI_SATA_SX4 tristate "Promise SATA SX4 support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e2e3d8671930..2d4439826c08 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -138,6 +138,7 @@ obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c new file mode 100644 index 000000000000..ce006a5b4533 --- /dev/null +++ b/drivers/scsi/pdc_adma.c @@ -0,0 +1,737 @@ +/* + * pdc_adma.c - Pacific Digital Corporation ADMA + * + * Maintained by: Mark Lord + * + * Copyright 2005 Mark Lord + * + * The contents of this file are subject to the Open + * Software License version 1.1 that can be found at + * http://www.opensource.org/licenses/osl-1.1.txt and is included herein + * by reference. + * + * Alternatively, the contents of this file may be used under the terms + * of the GNU General Public License version 2 (the "GPL") as distributed + * in the kernel source COPYING file, in which case the provisions of + * the GPL are applicable instead of the above. If you wish to allow + * the use of your version of this file only under the terms of the + * GPL and not to allow others to use your version of this file under + * the OSL, indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by the GPL. + * If you do not delete the provisions above, a recipient may use your + * version of this file under either the OSL or the GPL. + * + * Supports ATA disks in single-packet ADMA mode. + * Uses PIO for everything else. + * + * TODO: Use ADMA transfers for ATAPI devices, when possible. + * This requires careful attention to a number of quirks of the chip. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include +#include + +#define DRV_NAME "pdc_adma" +#define DRV_VERSION "0.01" + +/* macro to calculate base address for ATA regs */ +#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) + +/* macro to calculate base address for ADMA regs */ +#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) + +enum { + ADMA_PORTS = 2, + ADMA_CPB_BYTES = 40, + ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, + ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, + + ADMA_DMA_BOUNDARY = 0xffffffff, + + /* global register offsets */ + ADMA_MODE_LOCK = 0x00c7, + + /* per-channel register offsets */ + ADMA_CONTROL = 0x0000, /* ADMA control */ + ADMA_STATUS = 0x0002, /* ADMA status */ + ADMA_CPB_COUNT = 0x0004, /* CPB count */ + ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ + ADMA_CPB_NEXT = 0x000c, /* next CPB address */ + ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ + ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ + ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ + + /* ADMA_CONTROL register bits */ + aNIEN = (1 << 8), /* irq mask: 1==masked */ + aGO = (1 << 7), /* packet trigger ("Go!") */ + aRSTADM = (1 << 5), /* ADMA logic reset */ + aAUTEN = (1 << 3), /* packet trigger ("Go!") */ + aRSTA = (1 << 2), /* ATA hard reset */ + aPIOMD4 = 0x0003, /* PIO mode 4 */ + + /* ADMA_STATUS register bits */ + aPSD = (1 << 6), + aUIRQ = (1 << 4), + aPERR = (1 << 0), + + /* CPB bits */ + cDONE = (1 << 0), + cVLD = (1 << 0), + cDAT = (1 << 2), + cIEN = (1 << 3), + + /* PRD bits */ + pORD = (1 << 4), + pDIRO = (1 << 5), + pEND = (1 << 7), + + /* ATA register flags */ + rIGN = (1 << 5), + rEND = (1 << 7), + + /* ATA register addresses */ + ADMA_REGS_CONTROL = 0x0e, + ADMA_REGS_SECTOR_COUNT = 0x12, + ADMA_REGS_LBA_LOW = 0x13, + ADMA_REGS_LBA_MID = 0x14, + ADMA_REGS_LBA_HIGH = 0x15, + ADMA_REGS_DEVICE = 0x16, + ADMA_REGS_COMMAND = 0x17, + + /* PCI device IDs */ + board_1841_idx = 0, /* ADMA 2-port controller */ +}; + +typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; + +struct adma_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + adma_state_t state; +}; + +static int adma_ata_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static irqreturn_t adma_intr (int irq, void *dev_instance, + struct pt_regs *regs); +static int adma_port_start(struct ata_port *ap); +static void adma_host_stop(struct ata_host_set *host_set); +static void adma_port_stop(struct ata_port *ap); +static void adma_phy_reset(struct ata_port *ap); +static void adma_qc_prep(struct ata_queued_cmd *qc); +static int adma_qc_issue(struct ata_queued_cmd *qc); +static int adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void adma_bmdma_stop(struct ata_queued_cmd *qc); +static u8 adma_bmdma_status(struct ata_port *ap); +static void adma_irq_clear(struct ata_port *ap); +static void adma_eng_timeout(struct ata_port *ap); + +static Scsi_Host_Template adma_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ADMA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations adma_ata_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = adma_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = adma_phy_reset, + .qc_prep = adma_qc_prep, + .qc_issue = adma_qc_issue, + .eng_timeout = adma_eng_timeout, + .irq_handler = adma_intr, + .irq_clear = adma_irq_clear, + .port_start = adma_port_start, + .port_stop = adma_port_stop, + .host_stop = adma_host_stop, + .bmdma_stop = adma_bmdma_stop, + .bmdma_status = adma_bmdma_status, +}; + +static struct ata_port_info adma_port_info[] = { + /* board_1841_idx */ + { + .sht = &adma_ata_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, + .pio_mask = 0x10, /* pio4 */ + .udma_mask = 0x1f, /* udma0-4 */ + .port_ops = &adma_ata_ops, + }, +}; + +static struct pci_device_id adma_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_1841_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver adma_ata_pci_driver = { + .name = DRV_NAME, + .id_table = adma_ata_pci_tbl, + .probe = adma_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not yet supported */ +} + +static void adma_bmdma_stop(struct ata_queued_cmd *qc) +{ + /* nothing */ +} + +static u8 adma_bmdma_status(struct ata_port *ap) +{ + return 0; +} + +static void adma_irq_clear(struct ata_port *ap) +{ + /* nothing */ +} + +static void adma_reset_engine(void __iomem *chan) +{ + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_reinit_engine(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); + ata_check_status(ap); + + /* reset the ADMA engine */ + adma_reset_engine(chan); + + /* set in-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_IN); + + /* set CPB pointer */ + writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); + + /* set out-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_OUT); + + /* set CPB count */ + writew(1, chan + ADMA_CPB_COUNT); + + /* read/discard ADMA status */ + readb(chan + ADMA_STATUS); +} + +static inline void adma_enter_reg_mode(struct ata_port *ap) +{ + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + writew(aPIOMD4, chan + ADMA_CONTROL); + readb(chan + ADMA_STATUS); /* flush */ +} + +static void adma_phy_reset(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + pp->state = adma_state_idle; + adma_reinit_engine(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static void adma_eng_timeout(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + if (pp->state != adma_state_idle) /* healthy paranoia */ + pp->state = adma_state_mmio; + adma_reinit_engine(ap); + ata_eng_timeout(ap); +} + +static int adma_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg = qc->sg; + struct ata_port *ap = qc->ap; + struct adma_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt; + int nelem, i = (2 + buf[3]) * 8; + u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + + for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) { + u32 addr; + u32 len; + + addr = (u32)sg_dma_address(sg); + *(__le32 *)(buf + i) = cpu_to_le32(addr); + i += 4; + + len = sg_dma_len(sg) >> 3; + *(__le32 *)(buf + i) = cpu_to_le32(len); + i += 4; + + if ((nelem + 1) == qc->n_elem) + pFLAGS |= pEND; + buf[i++] = pFLAGS; + buf[i++] = qc->dev->dma_mode & 0xf; + buf[i++] = 0; /* pPKLW */ + buf[i++] = 0; /* reserved */ + + *(__le32 *)(buf + i) + = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); + i += 4; + + VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem, + (unsigned long)addr, len); + } + return i; +} + +static void adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + u8 *buf = pp->pkt; + u32 pkt_dma = (u32)pp->pkt_dma; + int i = 0; + + VPRINTK("ENTER\n"); + + adma_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) { + ata_qc_prep(qc); + return; + } + + buf[i++] = 0; /* Response flags */ + buf[i++] = 0; /* reserved */ + buf[i++] = cVLD | cDAT | cIEN; + i++; /* cLEN, gets filled in below */ + + *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ + i += 4; /* cNCPB */ + i += 4; /* cPRD, gets filled in below */ + + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + + /* ATA registers; must be a multiple of 4 */ + buf[i++] = qc->tf.device; + buf[i++] = ADMA_REGS_DEVICE; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) { + buf[i++] = qc->tf.hob_nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.hob_lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.hob_lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.hob_lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + } + buf[i++] = qc->tf.nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + buf[i++] = 0; + buf[i++] = ADMA_REGS_CONTROL; + buf[i++] = rIGN; + buf[i++] = 0; + buf[i++] = qc->tf.command; + buf[i++] = ADMA_REGS_COMMAND | rEND; + + buf[3] = (i >> 3) - 2; /* cLEN */ + *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ + + i = adma_fill_sg(qc); + wmb(); /* flush PRDs and pkt to memory */ +#if 0 + /* dump out CPB + PRDs for debug */ + { + int j, len = 0; + static char obuf[2048]; + for (j = 0; j < i; ++j) { + len += sprintf(obuf+len, "%02x ", buf[j]); + if ((j & 7) == 7) { + printk("%s\n", obuf); + len = 0; + } + } + if (len) + printk("%s\n", obuf); + } +#endif +} + +static inline void adma_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + VPRINTK("ENTER, ap %p\n", ap); + + /* fire up the ADMA engine */ + writew(aPIOMD4 | aGO | aAUTEN, chan + ADMA_CONTROL); +} + +static int adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = adma_state_pkt; + adma_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = adma_state_mmio; + return ata_qc_issue_prot(qc); +} + +static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + u8 __iomem *mmio_base = host_set->mmio_base; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap = host_set->ports[port_no]; + struct adma_port_priv *pp; + struct ata_queued_cmd *qc; + void __iomem *chan = ADMA_REGS(mmio_base, port_no); + u8 drv_stat, status = readb(chan + ADMA_STATUS); + + if (status == 0) + continue; + handled = 1; + adma_enter_reg_mode(ap); + if ((ap->flags & ATA_FLAG_PORT_DISABLED)) + continue; + pp = ap->private_data; + if (!pp || pp->state != adma_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + drv_stat = 0; + if ((status & (aPERR | aPSD | aUIRQ))) + drv_stat = ATA_ERR; + else if (pp->pkt[0] != cDONE) + drv_stat = ATA_ERR; + ata_qc_complete(qc, drv_stat); + } + return handled; +} + +static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap; + ap = host_set->ports[port_no]; + if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + struct ata_queued_cmd *qc; + struct adma_port_priv *pp = ap->private_data; + if (!pp || pp->state != adma_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_chk_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = adma_state_idle; + ata_qc_complete(qc, status); + handled = 1; + } + } + } + return handled; +} + +static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host_set->lock); + handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base + 0x000; + port->error_addr = + port->feature_addr = base + 0x004; + port->nsect_addr = base + 0x008; + port->lbal_addr = base + 0x00c; + port->lbam_addr = base + 0x010; + port->lbah_addr = base + 0x014; + port->device_addr = base + 0x018; + port->status_addr = + port->command_addr = base + 0x01c; + port->altstatus_addr = + port->ctl_addr = base + 0x038; +} + +static int adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + adma_enter_reg_mode(ap); + rc = -ENOMEM; + pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + goto err_out_kfree; + /* paranoia? */ + if ((pp->pkt_dma & 7) != 0) { + printk("bad alignment for pp->pkt_dma: %08x\n", + (u32)pp->pkt_dma); + goto err_out_kfree2; + } + memset(pp->pkt, 0, ADMA_PKT_BYTES); + ap->private_data = pp; + adma_reinit_engine(ap); + return 0; + +err_out_kfree2: + kfree(pp); +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + +static void adma_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp = ap->private_data; + + adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + if (pp != NULL) { + ap->private_data = NULL; + if (pp->pkt != NULL) + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + kfree(pp); + } + ata_port_stop(ap); +} + +static void adma_host_stop(struct ata_host_set *host_set) +{ + unsigned int port_no; + + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + + ata_pci_host_stop(host_set); +} + +static void adma_host_init(unsigned int chip_id, + struct ata_probe_ent *probe_ent) +{ + unsigned int port_no; + void __iomem *mmio_base = probe_ent->mmio_base; + + /* enable/lock aGO operation */ + writeb(7, mmio_base + ADMA_MODE_LOCK); + + /* reset the ADMA logic */ + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(mmio_base, port_no)); +} + +static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + int rc; + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + return rc; + } + return 0; +} + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int rc, port_no; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { + rc = -ENODEV; + goto err_out_regions; + } + + mmio_base = pci_iomap(pdev, 4, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + rc = adma_set_dma_masks(pdev, mmio_base); + if (rc) + goto err_out_iounmap; + + probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_iounmap; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = adma_port_info[board_idx].sht; + probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; + probe_ent->port_ops = adma_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + probe_ent->n_ports = ADMA_PORTS; + + for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { + adma_ata_setup_port(&probe_ent->port[port_no], + ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); + } + + pci_set_master(pdev); + + /* initialize adapter */ + adma_host_init(board_idx, probe_ent); + + rc = ata_device_add(probe_ent); + kfree(probe_ent); + if (rc != ADMA_PORTS) + goto err_out_iounmap; + return 0; + +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +static int __init adma_ata_init(void) +{ + return pci_module_init(&adma_ata_pci_driver); +} + +static void __exit adma_ata_exit(void) +{ + pci_unregister_driver(&adma_ata_pci_driver); +} + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(adma_ata_init); +module_exit(adma_ata_exit); -- cgit v1.2.3 From 68399bb5080c1d96f2110b0a040b39d3ccd7a18a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Oct 2005 01:44:14 -0400 Subject: [libata pdc_adma] license update, minor cleanup from me: change from OSL+GPL to GPL (with approval) from Mark: Gets rid of an unneeded control bit, slightly increasing throughput. --- drivers/scsi/pdc_adma.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index ce006a5b4533..53b8db4be1a9 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -5,21 +5,24 @@ * * Copyright 2005 Mark Lord * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. * * Supports ATA disks in single-packet ADMA mode. * Uses PIO for everything else. @@ -76,7 +79,6 @@ enum { aNIEN = (1 << 8), /* irq mask: 1==masked */ aGO = (1 << 7), /* packet trigger ("Go!") */ aRSTADM = (1 << 5), /* ADMA logic reset */ - aAUTEN = (1 << 3), /* packet trigger ("Go!") */ aRSTA = (1 << 2), /* ATA hard reset */ aPIOMD4 = 0x0003, /* PIO mode 4 */ @@ -415,7 +417,7 @@ static inline void adma_packet_start(struct ata_queued_cmd *qc) VPRINTK("ENTER, ap %p\n", ap); /* fire up the ADMA engine */ - writew(aPIOMD4 | aGO | aAUTEN, chan + ADMA_CONTROL); + writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); } static int adma_qc_issue(struct ata_queued_cmd *qc) -- cgit v1.2.3 From 0c33aeedb2cf99d877ad9adc7c3df07870f60293 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 26 Sep 2005 11:47:53 -0700 Subject: [IB] Add checks to multicast attach and detach Add checks so that we only allow multicast attach/detach with a valid multicast GID and the correct QP type. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/verbs.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 5081d903e561..72d3ef786db5 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -523,16 +523,22 @@ EXPORT_SYMBOL(ib_dealloc_fmr); int ib_attach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid) { - return qp->device->attach_mcast ? - qp->device->attach_mcast(qp, gid, lid) : - -ENOSYS; + if (!qp->device->attach_mcast) + return -ENOSYS; + if (gid->raw[0] != 0xff || qp->qp_type != IB_QPT_UD) + return -EINVAL; + + return qp->device->attach_mcast(qp, gid, lid); } EXPORT_SYMBOL(ib_attach_mcast); int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid) { - return qp->device->detach_mcast ? - qp->device->detach_mcast(qp, gid, lid) : - -ENOSYS; + if (!qp->device->detach_mcast) + return -ENOSYS; + if (gid->raw[0] != 0xff || qp->qp_type != IB_QPT_UD) + return -EINVAL; + + return qp->device->detach_mcast(qp, gid, lid); } EXPORT_SYMBOL(ib_detach_mcast); -- cgit v1.2.3 From 33033b797225553e48ca68d8d8dc5e64ec22e02b Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 26 Sep 2005 12:30:02 -0700 Subject: [IB] mthca: Report correct atomic capability Return correct atomic capability flag from mthca query function. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_dev.h | 1 + drivers/infiniband/hw/mthca/mthca_main.c | 1 + drivers/infiniband/hw/mthca/mthca_provider.c | 2 ++ 3 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 7bff5a8425f4..67a2f324a274 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -148,6 +148,7 @@ struct mthca_limits { int reserved_mcgs; int num_pds; int reserved_pds; + u32 flags; u8 port_width_cap; }; diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 23a3f56c7899..576e7fcd053c 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -172,6 +172,7 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim mdev->limits.reserved_uars = dev_lim->reserved_uars; mdev->limits.reserved_pds = dev_lim->reserved_pds; mdev->limits.port_width_cap = dev_lim->max_port_width; + mdev->limits.flags = dev_lim->flags; /* IB_DEVICE_RESIZE_MAX_WR not supported by driver. May be doable since hardware supports it for SRQ. diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 3f5319a46577..141509dced7e 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -99,6 +99,8 @@ static int mthca_query_device(struct ib_device *ibdev, props->max_qp_rd_atom = 1 << mdev->qp_table.rdb_shift; props->max_qp_init_rd_atom = 1 << mdev->qp_table.rdb_shift; props->local_ca_ack_delay = mdev->limits.local_ca_ack_delay; + props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ? + IB_ATOMIC_HCA : IB_ATOMIC_NONE; err = 0; out: -- cgit v1.2.3 From 6b73597e7062118c0549c2702bfb7d273518c906 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 26 Sep 2005 13:53:25 -0700 Subject: [IB] uverbs: ABI-breaking fixes for userspace verbs Introduce new userspace verbs ABI version 3. This eliminates some unneeded commands, and adds support for user-created completion channels. This cleans up problems with file leaks on error paths, and also makes sure that file descriptors are always installed into the correct process. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 18 ++- drivers/infiniband/core/uverbs_cmd.c | 186 ++++++++++------------ drivers/infiniband/core/uverbs_main.c | 292 ++++++++++++++++++---------------- include/rdma/ib_user_verbs.h | 58 ++----- 4 files changed, 258 insertions(+), 296 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index cc124344dd2c..475153e510a9 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -53,14 +53,14 @@ struct ib_uverbs_device { struct cdev dev; struct class_device class_dev; struct ib_device *ib_dev; - int num_comp; + int num_comp_vectors; }; struct ib_uverbs_event_file { struct kref ref; + struct file *file; struct ib_uverbs_file *uverbs_file; spinlock_t lock; - int fd; int is_async; wait_queue_head_t poll_wait; struct fasync_struct *async_queue; @@ -73,8 +73,7 @@ struct ib_uverbs_file { struct ib_uverbs_device *device; struct ib_ucontext *ucontext; struct ib_event_handler event_handler; - struct ib_uverbs_event_file async_file; - struct ib_uverbs_event_file comp_file[1]; + struct ib_uverbs_event_file *async_file; }; struct ib_uverbs_event { @@ -110,10 +109,17 @@ extern struct idr ib_uverbs_cq_idr; extern struct idr ib_uverbs_qp_idr; extern struct idr ib_uverbs_srq_idr; +struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file, + int is_async, int *fd); +void ib_uverbs_release_event_file(struct kref *ref); +struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd); + void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context); void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr); +void ib_uverbs_event_handler(struct ib_event_handler *handler, + struct ib_event *event); int ib_umem_get(struct ib_device *dev, struct ib_umem *mem, void *addr, size_t size, int write); @@ -125,16 +131,14 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem); const char __user *buf, int in_len, \ int out_len) -IB_UVERBS_DECLARE_CMD(query_params); IB_UVERBS_DECLARE_CMD(get_context); IB_UVERBS_DECLARE_CMD(query_device); IB_UVERBS_DECLARE_CMD(query_port); -IB_UVERBS_DECLARE_CMD(query_gid); -IB_UVERBS_DECLARE_CMD(query_pkey); IB_UVERBS_DECLARE_CMD(alloc_pd); IB_UVERBS_DECLARE_CMD(dealloc_pd); IB_UVERBS_DECLARE_CMD(reg_mr); IB_UVERBS_DECLARE_CMD(dereg_mr); +IB_UVERBS_DECLARE_CMD(create_comp_channel); IB_UVERBS_DECLARE_CMD(create_cq); IB_UVERBS_DECLARE_CMD(destroy_cq); IB_UVERBS_DECLARE_CMD(create_qp); diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 562445165d2b..79b60c3dc8d0 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -33,6 +33,8 @@ * $Id: uverbs_cmd.c 2708 2005-06-24 17:27:21Z roland $ */ +#include + #include #include "uverbs.h" @@ -45,29 +47,6 @@ (udata)->outlen = (olen); \ } while (0) -ssize_t ib_uverbs_query_params(struct ib_uverbs_file *file, - const char __user *buf, - int in_len, int out_len) -{ - struct ib_uverbs_query_params cmd; - struct ib_uverbs_query_params_resp resp; - - if (out_len < sizeof resp) - return -ENOSPC; - - if (copy_from_user(&cmd, buf, sizeof cmd)) - return -EFAULT; - - memset(&resp, 0, sizeof resp); - - resp.num_cq_events = file->device->num_comp; - - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) - return -EFAULT; - - return in_len; -} - ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -77,7 +56,7 @@ ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, struct ib_udata udata; struct ib_device *ibdev = file->device->ib_dev; struct ib_ucontext *ucontext; - int i; + struct file *filp; int ret; if (out_len < sizeof resp) @@ -110,26 +89,42 @@ ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, INIT_LIST_HEAD(&ucontext->srq_list); INIT_LIST_HEAD(&ucontext->ah_list); - resp.async_fd = file->async_file.fd; - for (i = 0; i < file->device->num_comp; ++i) - if (copy_to_user((void __user *) (unsigned long) cmd.cq_fd_tab + - i * sizeof (__u32), - &file->comp_file[i].fd, sizeof (__u32))) { - ret = -EFAULT; - goto err_free; - } + resp.num_comp_vectors = file->device->num_comp_vectors; + + filp = ib_uverbs_alloc_event_file(file, 1, &resp.async_fd); + if (IS_ERR(filp)) { + ret = PTR_ERR(filp); + goto err_free; + } if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_free; + goto err_file; } - file->ucontext = ucontext; + file->async_file = filp->private_data; + + INIT_IB_EVENT_HANDLER(&file->event_handler, file->device->ib_dev, + ib_uverbs_event_handler); + ret = ib_register_event_handler(&file->event_handler); + if (ret) + goto err_file; + + kref_get(&file->async_file->ref); + kref_get(&file->ref); + file->ucontext = ucontext; + + fd_install(resp.async_fd, filp); + up(&file->mutex); return in_len; +err_file: + put_unused_fd(resp.async_fd); + fput(filp); + err_free: ibdev->dealloc_ucontext(ucontext); @@ -255,62 +250,6 @@ ssize_t ib_uverbs_query_port(struct ib_uverbs_file *file, return in_len; } -ssize_t ib_uverbs_query_gid(struct ib_uverbs_file *file, - const char __user *buf, - int in_len, int out_len) -{ - struct ib_uverbs_query_gid cmd; - struct ib_uverbs_query_gid_resp resp; - int ret; - - if (out_len < sizeof resp) - return -ENOSPC; - - if (copy_from_user(&cmd, buf, sizeof cmd)) - return -EFAULT; - - memset(&resp, 0, sizeof resp); - - ret = ib_query_gid(file->device->ib_dev, cmd.port_num, cmd.index, - (union ib_gid *) resp.gid); - if (ret) - return ret; - - if (copy_to_user((void __user *) (unsigned long) cmd.response, - &resp, sizeof resp)) - return -EFAULT; - - return in_len; -} - -ssize_t ib_uverbs_query_pkey(struct ib_uverbs_file *file, - const char __user *buf, - int in_len, int out_len) -{ - struct ib_uverbs_query_pkey cmd; - struct ib_uverbs_query_pkey_resp resp; - int ret; - - if (out_len < sizeof resp) - return -ENOSPC; - - if (copy_from_user(&cmd, buf, sizeof cmd)) - return -EFAULT; - - memset(&resp, 0, sizeof resp); - - ret = ib_query_pkey(file->device->ib_dev, cmd.port_num, cmd.index, - &resp.pkey); - if (ret) - return ret; - - if (copy_to_user((void __user *) (unsigned long) cmd.response, - &resp, sizeof resp)) - return -EFAULT; - - return in_len; -} - ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -595,6 +534,35 @@ out: return ret ? ret : in_len; } +ssize_t ib_uverbs_create_comp_channel(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_create_comp_channel cmd; + struct ib_uverbs_create_comp_channel_resp resp; + struct file *filp; + + if (out_len < sizeof resp) + return -ENOSPC; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + filp = ib_uverbs_alloc_event_file(file, 0, &resp.fd); + if (IS_ERR(filp)) + return PTR_ERR(filp); + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) { + put_unused_fd(resp.fd); + fput(filp); + return -EFAULT; + } + + fd_install(resp.fd, filp); + return in_len; +} + ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -603,6 +571,7 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, struct ib_uverbs_create_cq_resp resp; struct ib_udata udata; struct ib_ucq_object *uobj; + struct ib_uverbs_event_file *ev_file = NULL; struct ib_cq *cq; int ret; @@ -616,9 +585,12 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, (unsigned long) cmd.response + sizeof resp, in_len - sizeof cmd, out_len - sizeof resp); - if (cmd.event_handler >= file->device->num_comp) + if (cmd.comp_vector >= file->device->num_comp_vectors) return -EINVAL; + if (cmd.comp_channel >= 0) + ev_file = ib_uverbs_lookup_comp_file(cmd.comp_channel); + uobj = kmalloc(sizeof *uobj, GFP_KERNEL); if (!uobj) return -ENOMEM; @@ -641,7 +613,7 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, cq->uobject = &uobj->uobject; cq->comp_handler = ib_uverbs_comp_handler; cq->event_handler = ib_uverbs_cq_event_handler; - cq->cq_context = file; + cq->cq_context = ev_file; atomic_set(&cq->usecnt, 0); retry: @@ -700,6 +672,7 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, struct ib_uverbs_destroy_cq_resp resp; struct ib_cq *cq; struct ib_ucq_object *uobj; + struct ib_uverbs_event_file *ev_file; struct ib_uverbs_event *evt, *tmp; u64 user_handle; int ret = -EINVAL; @@ -716,7 +689,8 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, goto out; user_handle = cq->uobject->user_handle; - uobj = container_of(cq->uobject, struct ib_ucq_object, uobject); + uobj = container_of(cq->uobject, struct ib_ucq_object, uobject); + ev_file = cq->cq_context; ret = ib_destroy_cq(cq); if (ret) @@ -728,19 +702,23 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->comp_file[0].lock); - list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { - list_del(&evt->list); - kfree(evt); + if (ev_file) { + spin_lock_irq(&ev_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&ev_file->lock); + + kref_put(&ev_file->ref, ib_uverbs_release_event_file); } - spin_unlock_irq(&file->comp_file[0].lock); - spin_lock_irq(&file->async_file.lock); + spin_lock_irq(&file->async_file->lock); list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) { list_del(&evt->list); kfree(evt); } - spin_unlock_irq(&file->async_file.lock); + spin_unlock_irq(&file->async_file->lock); resp.comp_events_reported = uobj->comp_events_reported; resp.async_events_reported = uobj->async_events_reported; @@ -1005,12 +983,12 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file.lock); + spin_lock_irq(&file->async_file->lock); list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { list_del(&evt->list); kfree(evt); } - spin_unlock_irq(&file->async_file.lock); + spin_unlock_irq(&file->async_file->lock); resp.events_reported = uobj->events_reported; @@ -1243,12 +1221,12 @@ ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file.lock); + spin_lock_irq(&file->async_file->lock); list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { list_del(&evt->list); kfree(evt); } - spin_unlock_irq(&file->async_file.lock); + spin_unlock_irq(&file->async_file->lock); resp.events_reported = uobj->events_reported; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 12511808de21..e7058fbc607d 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -77,26 +77,24 @@ static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES); static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) = { - [IB_USER_VERBS_CMD_QUERY_PARAMS] = ib_uverbs_query_params, - [IB_USER_VERBS_CMD_GET_CONTEXT] = ib_uverbs_get_context, - [IB_USER_VERBS_CMD_QUERY_DEVICE] = ib_uverbs_query_device, - [IB_USER_VERBS_CMD_QUERY_PORT] = ib_uverbs_query_port, - [IB_USER_VERBS_CMD_QUERY_GID] = ib_uverbs_query_gid, - [IB_USER_VERBS_CMD_QUERY_PKEY] = ib_uverbs_query_pkey, - [IB_USER_VERBS_CMD_ALLOC_PD] = ib_uverbs_alloc_pd, - [IB_USER_VERBS_CMD_DEALLOC_PD] = ib_uverbs_dealloc_pd, - [IB_USER_VERBS_CMD_REG_MR] = ib_uverbs_reg_mr, - [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr, - [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq, - [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq, - [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp, - [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp, - [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, - [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, - [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, - [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, - [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq, - [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq, + [IB_USER_VERBS_CMD_GET_CONTEXT] = ib_uverbs_get_context, + [IB_USER_VERBS_CMD_QUERY_DEVICE] = ib_uverbs_query_device, + [IB_USER_VERBS_CMD_QUERY_PORT] = ib_uverbs_query_port, + [IB_USER_VERBS_CMD_ALLOC_PD] = ib_uverbs_alloc_pd, + [IB_USER_VERBS_CMD_DEALLOC_PD] = ib_uverbs_dealloc_pd, + [IB_USER_VERBS_CMD_REG_MR] = ib_uverbs_reg_mr, + [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr, + [IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL] = ib_uverbs_create_comp_channel, + [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq, + [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq, + [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp, + [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp, + [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, + [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, + [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, + [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, + [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq, + [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq, }; static struct vfsmount *uverbs_event_mnt; @@ -188,25 +186,19 @@ static ssize_t ib_uverbs_event_read(struct file *filp, char __user *buf, spin_lock_irq(&file->lock); - while (list_empty(&file->event_list) && file->fd >= 0) { + while (list_empty(&file->event_list)) { spin_unlock_irq(&file->lock); if (filp->f_flags & O_NONBLOCK) return -EAGAIN; if (wait_event_interruptible(file->poll_wait, - !list_empty(&file->event_list) || - file->fd < 0)) + !list_empty(&file->event_list))) return -ERESTARTSYS; spin_lock_irq(&file->lock); } - if (file->fd < 0) { - spin_unlock_irq(&file->lock); - return -ENODEV; - } - event = list_entry(file->event_list.next, struct ib_uverbs_event, list); if (file->is_async) @@ -248,26 +240,19 @@ static unsigned int ib_uverbs_event_poll(struct file *filp, poll_wait(filp, &file->poll_wait, wait); spin_lock_irq(&file->lock); - if (file->fd < 0) - pollflags = POLLERR; - else if (!list_empty(&file->event_list)) + if (!list_empty(&file->event_list)) pollflags = POLLIN | POLLRDNORM; spin_unlock_irq(&file->lock); return pollflags; } -static void ib_uverbs_event_release(struct ib_uverbs_event_file *file) +void ib_uverbs_release_event_file(struct kref *ref) { - struct ib_uverbs_event *entry, *tmp; + struct ib_uverbs_event_file *file = + container_of(ref, struct ib_uverbs_event_file, ref); - spin_lock_irq(&file->lock); - if (file->fd != -1) { - file->fd = -1; - list_for_each_entry_safe(entry, tmp, &file->event_list, list) - kfree(entry); - } - spin_unlock_irq(&file->lock); + kfree(file); } static int ib_uverbs_event_fasync(int fd, struct file *filp, int on) @@ -280,21 +265,30 @@ static int ib_uverbs_event_fasync(int fd, struct file *filp, int on) static int ib_uverbs_event_close(struct inode *inode, struct file *filp) { struct ib_uverbs_event_file *file = filp->private_data; + struct ib_uverbs_event *entry, *tmp; + + spin_lock_irq(&file->lock); + file->file = NULL; + list_for_each_entry_safe(entry, tmp, &file->event_list, list) { + if (entry->counter) + list_del(&entry->obj_list); + kfree(entry); + } + spin_unlock_irq(&file->lock); - ib_uverbs_event_release(file); ib_uverbs_event_fasync(-1, filp, 0); - kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); + + if (file->is_async) { + ib_unregister_event_handler(&file->uverbs_file->event_handler); + kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); + } + kref_put(&file->ref, ib_uverbs_release_event_file); return 0; } static struct file_operations uverbs_event_fops = { - /* - * No .owner field since we artificially create event files, - * so there is no increment to the module reference count in - * the open path. All event files come from a uverbs command - * file, which already takes a module reference, so this is OK. - */ + .owner = THIS_MODULE, .read = ib_uverbs_event_read, .poll = ib_uverbs_event_poll, .release = ib_uverbs_event_close, @@ -303,10 +297,19 @@ static struct file_operations uverbs_event_fops = { void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context) { - struct ib_uverbs_file *file = cq_context; - struct ib_ucq_object *uobj; - struct ib_uverbs_event *entry; - unsigned long flags; + struct ib_uverbs_event_file *file = cq_context; + struct ib_ucq_object *uobj; + struct ib_uverbs_event *entry; + unsigned long flags; + + if (!file) + return; + + spin_lock_irqsave(&file->lock, flags); + if (!file->file) { + spin_unlock_irqrestore(&file->lock, flags); + return; + } entry = kmalloc(sizeof *entry, GFP_ATOMIC); if (!entry) @@ -317,13 +320,12 @@ void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context) entry->desc.comp.cq_handle = cq->uobject->user_handle; entry->counter = &uobj->comp_events_reported; - spin_lock_irqsave(&file->comp_file[0].lock, flags); - list_add_tail(&entry->list, &file->comp_file[0].event_list); + list_add_tail(&entry->list, &file->event_list); list_add_tail(&entry->obj_list, &uobj->comp_list); - spin_unlock_irqrestore(&file->comp_file[0].lock, flags); + spin_unlock_irqrestore(&file->lock, flags); - wake_up_interruptible(&file->comp_file[0].poll_wait); - kill_fasync(&file->comp_file[0].async_queue, SIGIO, POLL_IN); + wake_up_interruptible(&file->poll_wait); + kill_fasync(&file->async_queue, SIGIO, POLL_IN); } static void ib_uverbs_async_handler(struct ib_uverbs_file *file, @@ -334,6 +336,12 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, struct ib_uverbs_event *entry; unsigned long flags; + spin_lock_irqsave(&file->async_file->lock, flags); + if (!file->async_file->file) { + spin_unlock_irqrestore(&file->async_file->lock, flags); + return; + } + entry = kmalloc(sizeof *entry, GFP_ATOMIC); if (!entry) return; @@ -342,24 +350,24 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, entry->desc.async.event_type = event; entry->counter = counter; - spin_lock_irqsave(&file->async_file.lock, flags); - list_add_tail(&entry->list, &file->async_file.event_list); + list_add_tail(&entry->list, &file->async_file->event_list); if (obj_list) list_add_tail(&entry->obj_list, obj_list); - spin_unlock_irqrestore(&file->async_file.lock, flags); + spin_unlock_irqrestore(&file->async_file->lock, flags); - wake_up_interruptible(&file->async_file.poll_wait); - kill_fasync(&file->async_file.async_queue, SIGIO, POLL_IN); + wake_up_interruptible(&file->async_file->poll_wait); + kill_fasync(&file->async_file->async_queue, SIGIO, POLL_IN); } void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr) { + struct ib_uverbs_event_file *ev_file = context_ptr; struct ib_ucq_object *uobj; uobj = container_of(event->element.cq->uobject, struct ib_ucq_object, uobject); - ib_uverbs_async_handler(context_ptr, uobj->uobject.user_handle, + ib_uverbs_async_handler(ev_file->uverbs_file, uobj->uobject.user_handle, event->event, &uobj->async_list, &uobj->async_events_reported); @@ -389,8 +397,8 @@ void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr) &uobj->events_reported); } -static void ib_uverbs_event_handler(struct ib_event_handler *handler, - struct ib_event *event) +void ib_uverbs_event_handler(struct ib_event_handler *handler, + struct ib_event *event) { struct ib_uverbs_file *file = container_of(handler, struct ib_uverbs_file, event_handler); @@ -399,38 +407,90 @@ static void ib_uverbs_event_handler(struct ib_event_handler *handler, NULL, NULL); } -static int ib_uverbs_event_init(struct ib_uverbs_event_file *file, - struct ib_uverbs_file *uverbs_file) +struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file, + int is_async, int *fd) { + struct ib_uverbs_event_file *ev_file; struct file *filp; + int ret; - spin_lock_init(&file->lock); - INIT_LIST_HEAD(&file->event_list); - init_waitqueue_head(&file->poll_wait); - file->uverbs_file = uverbs_file; - file->async_queue = NULL; - - file->fd = get_unused_fd(); - if (file->fd < 0) - return file->fd; + ev_file = kmalloc(sizeof *ev_file, GFP_KERNEL); + if (!ev_file) + return ERR_PTR(-ENOMEM); + + kref_init(&ev_file->ref); + spin_lock_init(&ev_file->lock); + INIT_LIST_HEAD(&ev_file->event_list); + init_waitqueue_head(&ev_file->poll_wait); + ev_file->uverbs_file = uverbs_file; + ev_file->async_queue = NULL; + ev_file->is_async = is_async; + + *fd = get_unused_fd(); + if (*fd < 0) { + ret = *fd; + goto err; + } filp = get_empty_filp(); if (!filp) { - put_unused_fd(file->fd); - return -ENFILE; + ret = -ENFILE; + goto err_fd; } - filp->f_op = &uverbs_event_fops; + ev_file->file = filp; + + /* + * fops_get() can't fail here, because we're coming from a + * system call on a uverbs file, which will already have a + * module reference. + */ + filp->f_op = fops_get(&uverbs_event_fops); filp->f_vfsmnt = mntget(uverbs_event_mnt); filp->f_dentry = dget(uverbs_event_mnt->mnt_root); filp->f_mapping = filp->f_dentry->d_inode->i_mapping; filp->f_flags = O_RDONLY; filp->f_mode = FMODE_READ; - filp->private_data = file; + filp->private_data = ev_file; - fd_install(file->fd, filp); + return filp; - return 0; +err_fd: + put_unused_fd(*fd); + +err: + kfree(ev_file); + return ERR_PTR(ret); +} + +/* + * Look up a completion event file by FD. If lookup is successful, + * takes a ref to the event file struct that it returns; if + * unsuccessful, returns NULL. + */ +struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd) +{ + struct ib_uverbs_event_file *ev_file = NULL; + struct file *filp; + + filp = fget(fd); + if (!filp) + return NULL; + + if (filp->f_op != &uverbs_event_fops) + goto out; + + ev_file = filp->private_data; + if (ev_file->is_async) { + ev_file = NULL; + goto out; + } + + kref_get(&ev_file->ref); + +out: + fput(filp); + return ev_file; } static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, @@ -453,8 +513,7 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, !uverbs_cmd_table[hdr.command]) return -EINVAL; - if (!file->ucontext && - hdr.command != IB_USER_VERBS_CMD_QUERY_PARAMS && + if (!file->ucontext && hdr.command != IB_USER_VERBS_CMD_GET_CONTEXT) return -EINVAL; @@ -477,82 +536,33 @@ static int ib_uverbs_open(struct inode *inode, struct file *filp) struct ib_uverbs_device *dev = container_of(inode->i_cdev, struct ib_uverbs_device, dev); struct ib_uverbs_file *file; - int i = 0; - int ret; if (!try_module_get(dev->ib_dev->owner)) return -ENODEV; - file = kmalloc(sizeof *file + - (dev->num_comp - 1) * sizeof (struct ib_uverbs_event_file), - GFP_KERNEL); + file = kmalloc(sizeof *file, GFP_KERNEL); if (!file) { - ret = -ENOMEM; - goto err; + module_put(dev->ib_dev->owner); + return -ENOMEM; } - file->device = dev; + file->device = dev; + file->ucontext = NULL; kref_init(&file->ref); init_MUTEX(&file->mutex); - file->ucontext = NULL; - - kref_get(&file->ref); - ret = ib_uverbs_event_init(&file->async_file, file); - if (ret) - goto err_kref; - - file->async_file.is_async = 1; - - for (i = 0; i < dev->num_comp; ++i) { - kref_get(&file->ref); - ret = ib_uverbs_event_init(&file->comp_file[i], file); - if (ret) - goto err_async; - file->comp_file[i].is_async = 0; - } - - filp->private_data = file; - INIT_IB_EVENT_HANDLER(&file->event_handler, dev->ib_dev, - ib_uverbs_event_handler); - if (ib_register_event_handler(&file->event_handler)) - goto err_async; - return 0; - -err_async: - while (i--) - ib_uverbs_event_release(&file->comp_file[i]); - - ib_uverbs_event_release(&file->async_file); - -err_kref: - /* - * One extra kref_put() because we took a reference before the - * event file creation that failed and got us here. - */ - kref_put(&file->ref, ib_uverbs_release_file); - kref_put(&file->ref, ib_uverbs_release_file); - -err: - module_put(dev->ib_dev->owner); - return ret; } static int ib_uverbs_close(struct inode *inode, struct file *filp) { struct ib_uverbs_file *file = filp->private_data; - int i; - ib_unregister_event_handler(&file->event_handler); - ib_uverbs_event_release(&file->async_file); ib_dealloc_ucontext(file->ucontext); - for (i = 0; i < file->device->num_comp; ++i) - ib_uverbs_event_release(&file->comp_file[i]); - + kref_put(&file->async_file->ref, ib_uverbs_release_event_file); kref_put(&file->ref, ib_uverbs_release_file); return 0; @@ -631,8 +641,8 @@ static void ib_uverbs_add_one(struct ib_device *device) set_bit(uverbs_dev->devnum, dev_map); spin_unlock(&map_lock); - uverbs_dev->ib_dev = device; - uverbs_dev->num_comp = 1; + uverbs_dev->ib_dev = device; + uverbs_dev->num_comp_vectors = 1; if (device->mmap) cdev_init(&uverbs_dev->dev, &uverbs_mmap_fops); diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h index fd85725391a4..0532b78200ca 100644 --- a/include/rdma/ib_user_verbs.h +++ b/include/rdma/ib_user_verbs.h @@ -42,15 +42,12 @@ * Increment this value if any changes that break userspace ABI * compatibility are made. */ -#define IB_USER_VERBS_ABI_VERSION 2 +#define IB_USER_VERBS_ABI_VERSION 3 enum { - IB_USER_VERBS_CMD_QUERY_PARAMS, IB_USER_VERBS_CMD_GET_CONTEXT, IB_USER_VERBS_CMD_QUERY_DEVICE, IB_USER_VERBS_CMD_QUERY_PORT, - IB_USER_VERBS_CMD_QUERY_GID, - IB_USER_VERBS_CMD_QUERY_PKEY, IB_USER_VERBS_CMD_ALLOC_PD, IB_USER_VERBS_CMD_DEALLOC_PD, IB_USER_VERBS_CMD_CREATE_AH, @@ -65,6 +62,7 @@ enum { IB_USER_VERBS_CMD_ALLOC_MW, IB_USER_VERBS_CMD_BIND_MW, IB_USER_VERBS_CMD_DEALLOC_MW, + IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL, IB_USER_VERBS_CMD_CREATE_CQ, IB_USER_VERBS_CMD_RESIZE_CQ, IB_USER_VERBS_CMD_DESTROY_CQ, @@ -118,27 +116,14 @@ struct ib_uverbs_cmd_hdr { __u16 out_words; }; -/* - * No driver_data for "query params" command, since this is intended - * to be a core function with no possible device dependence. - */ -struct ib_uverbs_query_params { - __u64 response; -}; - -struct ib_uverbs_query_params_resp { - __u32 num_cq_events; -}; - struct ib_uverbs_get_context { __u64 response; - __u64 cq_fd_tab; __u64 driver_data[0]; }; struct ib_uverbs_get_context_resp { __u32 async_fd; - __u32 reserved; + __u32 num_comp_vectors; }; struct ib_uverbs_query_device { @@ -220,31 +205,6 @@ struct ib_uverbs_query_port_resp { __u8 reserved[3]; }; -struct ib_uverbs_query_gid { - __u64 response; - __u8 port_num; - __u8 index; - __u8 reserved[6]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_gid_resp { - __u8 gid[16]; -}; - -struct ib_uverbs_query_pkey { - __u64 response; - __u8 port_num; - __u8 index; - __u8 reserved[6]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_pkey_resp { - __u16 pkey; - __u16 reserved; -}; - struct ib_uverbs_alloc_pd { __u64 response; __u64 driver_data[0]; @@ -278,11 +238,21 @@ struct ib_uverbs_dereg_mr { __u32 mr_handle; }; +struct ib_uverbs_create_comp_channel { + __u64 response; +}; + +struct ib_uverbs_create_comp_channel_resp { + __u32 fd; +}; + struct ib_uverbs_create_cq { __u64 response; __u64 user_handle; __u32 cqe; - __u32 event_handler; + __u32 comp_vector; + __s32 comp_channel; + __u32 reserved; __u64 driver_data[0]; }; -- cgit v1.2.3 From eb9d3cd5ce2828fbb99ed7270089ea152c8f64b3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 27 Sep 2005 15:07:25 -0700 Subject: [IB] uverbs: Fix up resource creation error paths By waiting to add resources to our lists until after the last operation that can fail, we don't have to remove them from their lists in the error path. Also, we should hold the idr mutex until we know whether resource creation has succeed or failed, to avoid someone finding a resource in our table before we're ready. Loosely based on work by Robert Walsh . Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_cmd.c | 111 ++++++++++++++++------------------- 1 file changed, 50 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 79b60c3dc8d0..a0ceb1cbed52 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -288,24 +289,20 @@ ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file, pd->uobject = uobj; atomic_set(&pd->usecnt, 0); + down(&ib_uverbs_idr_mutex); + retry: if (!idr_pre_get(&ib_uverbs_pd_idr, GFP_KERNEL)) { ret = -ENOMEM; - goto err_pd; + goto err_up; } - down(&ib_uverbs_idr_mutex); ret = idr_get_new(&ib_uverbs_pd_idr, pd, &uobj->id); - up(&ib_uverbs_idr_mutex); if (ret == -EAGAIN) goto retry; if (ret) - goto err_pd; - - down(&file->mutex); - list_add_tail(&uobj->list, &file->ucontext->pd_list); - up(&file->mutex); + goto err_up; memset(&resp, 0, sizeof resp); resp.pd_handle = uobj->id; @@ -313,21 +310,22 @@ retry: if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } - return in_len; - -err_list: - down(&file->mutex); - list_del(&uobj->list); + down(&file->mutex); + list_add_tail(&uobj->list, &file->ucontext->pd_list); up(&file->mutex); - down(&ib_uverbs_idr_mutex); - idr_remove(&ib_uverbs_pd_idr, uobj->id); up(&ib_uverbs_idr_mutex); -err_pd: + return in_len; + +err_idr: + idr_remove(&ib_uverbs_pd_idr, uobj->id); + +err_up: + up(&ib_uverbs_idr_mutex); ib_dealloc_pd(pd); err: @@ -463,24 +461,22 @@ retry: resp.mr_handle = obj->uobject.id; - down(&file->mutex); - list_add_tail(&obj->uobject.list, &file->ucontext->mr_list); - up(&file->mutex); - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } + down(&file->mutex); + list_add_tail(&obj->uobject.list, &file->ucontext->mr_list); + up(&file->mutex); + up(&ib_uverbs_idr_mutex); return in_len; -err_list: - down(&file->mutex); - list_del(&obj->uobject.list); - up(&file->mutex); +err_idr: + idr_remove(&ib_uverbs_mr_idr, obj->uobject.id); err_unreg: ib_dereg_mr(mr); @@ -616,24 +612,20 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, cq->cq_context = ev_file; atomic_set(&cq->usecnt, 0); + down(&ib_uverbs_idr_mutex); + retry: if (!idr_pre_get(&ib_uverbs_cq_idr, GFP_KERNEL)) { ret = -ENOMEM; - goto err_cq; + goto err_up; } - down(&ib_uverbs_idr_mutex); ret = idr_get_new(&ib_uverbs_cq_idr, cq, &uobj->uobject.id); - up(&ib_uverbs_idr_mutex); if (ret == -EAGAIN) goto retry; if (ret) - goto err_cq; - - down(&file->mutex); - list_add_tail(&uobj->uobject.list, &file->ucontext->cq_list); - up(&file->mutex); + goto err_up; memset(&resp, 0, sizeof resp); resp.cq_handle = uobj->uobject.id; @@ -642,21 +634,22 @@ retry: if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } - return in_len; - -err_list: - down(&file->mutex); - list_del(&uobj->uobject.list); + down(&file->mutex); + list_add_tail(&uobj->uobject.list, &file->ucontext->cq_list); up(&file->mutex); - down(&ib_uverbs_idr_mutex); - idr_remove(&ib_uverbs_cq_idr, uobj->uobject.id); up(&ib_uverbs_idr_mutex); -err_cq: + return in_len; + +err_idr: + idr_remove(&ib_uverbs_cq_idr, uobj->uobject.id); + +err_up: + up(&ib_uverbs_idr_mutex); ib_destroy_cq(cq); err: @@ -837,24 +830,22 @@ retry: resp.qp_handle = uobj->uobject.id; - down(&file->mutex); - list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list); - up(&file->mutex); - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } + down(&file->mutex); + list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list); + up(&file->mutex); + up(&ib_uverbs_idr_mutex); return in_len; -err_list: - down(&file->mutex); - list_del(&uobj->uobject.list); - up(&file->mutex); +err_idr: + idr_remove(&ib_uverbs_qp_idr, uobj->uobject.id); err_destroy: ib_destroy_qp(qp); @@ -1126,24 +1117,22 @@ retry: resp.srq_handle = uobj->uobject.id; - down(&file->mutex); - list_add_tail(&uobj->uobject.list, &file->ucontext->srq_list); - up(&file->mutex); - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } + down(&file->mutex); + list_add_tail(&uobj->uobject.list, &file->ucontext->srq_list); + up(&file->mutex); + up(&ib_uverbs_idr_mutex); return in_len; -err_list: - down(&file->mutex); - list_del(&uobj->uobject.list); - up(&file->mutex); +err_idr: + idr_remove(&ib_uverbs_srq_idr, uobj->uobject.id); err_destroy: ib_destroy_srq(srq); -- cgit v1.2.3 From 274c0891637c44ac71f3ac40be91b43c2318883a Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 29 Sep 2005 14:17:48 -0700 Subject: [IB] uverbs: Add device-specific ABI version attribute Add abi_version attribute to uverbs class devices to allow for ABI versioning of device-specific interfaces. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 11 +++++++++++ drivers/infiniband/hw/mthca/mthca_provider.c | 1 + drivers/infiniband/hw/mthca/mthca_user.h | 6 ++++++ include/rdma/ib_verbs.h | 2 ++ 4 files changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e7058fbc607d..c84cc28b60ee 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -598,6 +598,15 @@ static ssize_t show_ibdev(struct class_device *class_dev, char *buf) } static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); +static ssize_t show_dev_abi_version(struct class_device *class_dev, char *buf) +{ + struct ib_uverbs_device *dev = + container_of(class_dev, struct ib_uverbs_device, class_dev); + + return sprintf(buf, "%d\n", dev->ib_dev->uverbs_abi_ver); +} +static CLASS_DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL); + static void ib_uverbs_release_class_dev(struct class_device *class_dev) { struct ib_uverbs_device *dev = @@ -662,6 +671,8 @@ static void ib_uverbs_add_one(struct ib_device *device) if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_ibdev)) goto err_class; + if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_abi_version)) + goto err_class; ib_set_client_data(device, &uverbs_client, uverbs_dev); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 141509dced7e..939b09dcfe09 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1060,6 +1060,7 @@ int mthca_register_device(struct mthca_dev *dev) strlcpy(dev->ib_dev.name, "mthca%d", IB_DEVICE_NAME_MAX); dev->ib_dev.owner = THIS_MODULE; + dev->ib_dev.uverbs_abi_ver = MTHCA_UVERBS_ABI_VERSION; dev->ib_dev.node_type = IB_NODE_CA; dev->ib_dev.phys_port_cnt = dev->limits.num_ports; dev->ib_dev.dma_device = &dev->pdev->dev; diff --git a/drivers/infiniband/hw/mthca/mthca_user.h b/drivers/infiniband/hw/mthca/mthca_user.h index 41613ec8a04e..bb015c6494c4 100644 --- a/drivers/infiniband/hw/mthca/mthca_user.h +++ b/drivers/infiniband/hw/mthca/mthca_user.h @@ -37,6 +37,12 @@ #include +/* + * Increment this value if any changes that break userspace ABI + * compatibility are made. + */ +#define MTHCA_UVERBS_ABI_VERSION 1 + /* * Make sure that all structs defined in this file remain laid out so * that they pack the same way on 32-bit and 64-bit architectures (to diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index e6f4c9e55df7..d13f25a78192 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -951,6 +951,8 @@ struct ib_device { IB_DEV_UNREGISTERED } reg_state; + int uverbs_abi_ver; + u8 node_type; u8 phys_port_cnt; }; -- cgit v1.2.3 From 9825051e8c81cbd4400333e7cdc04be77a0bab75 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Sat, 1 Oct 2005 13:09:44 -0700 Subject: [IB] mthca: Fill in more fields in query_port method Add code to fill in the bad_pkey_cntr, max_mtu, active_mtu and subnet_timeout fields in mthca_query_port(). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_provider.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 939b09dcfe09..4e87ad115712 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -152,9 +152,13 @@ static int mthca_query_port(struct ib_device *ibdev, props->gid_tbl_len = to_mdev(ibdev)->limits.gid_table_len; props->max_msg_sz = 0x80000000; props->pkey_tbl_len = to_mdev(ibdev)->limits.pkey_table_len; + props->bad_pkey_cntr = be16_to_cpup((__be16 *) (out_mad->data + 46)); props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48)); props->active_width = out_mad->data[31] & 0xf; props->active_speed = out_mad->data[35] >> 4; + props->max_mtu = out_mad->data[41] & 0xf; + props->active_mtu = out_mad->data[36] >> 4; + props->subnet_timeout = out_mad->data[51] & 0x1f; out: kfree(in_mad); -- cgit v1.2.3 From f575394f1de9b4afa4b474f1882c7e2d3b8e51d7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 3 Oct 2005 09:18:02 -0700 Subject: [IB] uverbs: reject invalid memory registration permission flags Reject userspace memory registrations with invalid permission flags: "local write" is required if "remote write" or "remote atomic" is also requested. Pointed out by Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_cmd.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index a0ceb1cbed52..2e959acf2ff1 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -396,6 +396,14 @@ ssize_t ib_uverbs_reg_mr(struct ib_uverbs_file *file, if ((cmd.start & ~PAGE_MASK) != (cmd.hca_va & ~PAGE_MASK)) return -EINVAL; + /* + * Local write permission is required if remote write or + * remote atomic permission is also requested. + */ + if (cmd.access_flags & (IB_ACCESS_REMOTE_ATOMIC | IB_ACCESS_REMOTE_WRITE) && + !(cmd.access_flags & IB_ACCESS_LOCAL_WRITE)) + return -EINVAL; + obj = kmalloc(sizeof *obj, GFP_KERNEL); if (!obj) return -ENOMEM; -- cgit v1.2.3 From 116c0074ecfd6f061570856bec52b691d54dbd3c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 3 Oct 2005 09:32:33 -0700 Subject: [IB] Check port number in ib_query_port()/ib_modify_port() Check port number before passing query_port or modify_port operations on to device driver. Signed-off-by: Roland Dreier --- drivers/infiniband/core/device.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index d3cf84e01587..5a6e44976405 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -514,6 +514,12 @@ int ib_query_port(struct ib_device *device, u8 port_num, struct ib_port_attr *port_attr) { + if (device->node_type == IB_NODE_SWITCH) { + if (port_num) + return -EINVAL; + } else if (port_num < 1 || port_num > device->phys_port_cnt) + return -EINVAL; + return device->query_port(device, port_num, port_attr); } EXPORT_SYMBOL(ib_query_port); @@ -583,6 +589,12 @@ int ib_modify_port(struct ib_device *device, u8 port_num, int port_modify_mask, struct ib_port_modify *port_modify) { + if (device->node_type == IB_NODE_SWITCH) { + if (port_num) + return -EINVAL; + } else if (port_num < 1 || port_num > device->phys_port_cnt) + return -EINVAL; + return device->modify_port(device, port_num, port_modify_mask, port_modify); } -- cgit v1.2.3 From 90f104da22bbf2e2b8a2136c12fb4e013fccf504 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 6 Oct 2005 13:15:56 -0700 Subject: [IB] mthca: SRQ limit reached events Our hardware supports generating an event when the number of receives posted to a shared receive queue (SRQ) falls below a user-specified limit. Implement mthca_modify_srq() to arm the limit, and add code to handle dispatching SRQ events when they occur. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_dev.h | 2 ++ drivers/infiniband/hw/mthca/mthca_eq.c | 21 ++++++++++++++++++--- drivers/infiniband/hw/mthca/mthca_provider.c | 1 + drivers/infiniband/hw/mthca/mthca_srq.c | 25 ++++++++++++++++++++++++- 4 files changed, 45 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 67a2f324a274..6e18c128af42 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -448,6 +448,8 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn, int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, struct ib_srq_attr *attr, struct mthca_srq *srq); void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq); +int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, + enum ib_srq_attr_mask attr_mask); void mthca_srq_event(struct mthca_dev *dev, u32 srqn, enum ib_event_type event_type); void mthca_free_srq_wqe(struct mthca_srq *srq, u32 wqe_addr); diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index c81fa8e975ef..f2afdc6c7e60 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -83,7 +83,8 @@ enum { MTHCA_EVENT_TYPE_PATH_MIG = 0x01, MTHCA_EVENT_TYPE_COMM_EST = 0x02, MTHCA_EVENT_TYPE_SQ_DRAINED = 0x03, - MTHCA_EVENT_TYPE_SRQ_LAST_WQE = 0x13, + MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE = 0x13, + MTHCA_EVENT_TYPE_SRQ_LIMIT = 0x14, MTHCA_EVENT_TYPE_CQ_ERROR = 0x04, MTHCA_EVENT_TYPE_WQ_CATAS_ERROR = 0x05, MTHCA_EVENT_TYPE_EEC_CATAS_ERROR = 0x06, @@ -110,8 +111,9 @@ enum { (1ULL << MTHCA_EVENT_TYPE_LOCAL_CATAS_ERROR) | \ (1ULL << MTHCA_EVENT_TYPE_PORT_CHANGE) | \ (1ULL << MTHCA_EVENT_TYPE_ECC_DETECT)) -#define MTHCA_SRQ_EVENT_MASK (1ULL << MTHCA_EVENT_TYPE_SRQ_CATAS_ERROR) | \ - (1ULL << MTHCA_EVENT_TYPE_SRQ_LAST_WQE) +#define MTHCA_SRQ_EVENT_MASK ((1ULL << MTHCA_EVENT_TYPE_SRQ_CATAS_ERROR) | \ + (1ULL << MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE) | \ + (1ULL << MTHCA_EVENT_TYPE_SRQ_LIMIT)) #define MTHCA_CMD_EVENT_MASK (1ULL << MTHCA_EVENT_TYPE_CMD) #define MTHCA_EQ_DB_INC_CI (1 << 24) @@ -141,6 +143,9 @@ struct mthca_eqe { struct { __be32 qpn; } __attribute__((packed)) qp; + struct { + __be32 srqn; + } __attribute__((packed)) srq; struct { __be32 cqn; u32 reserved1; @@ -305,6 +310,16 @@ static int mthca_eq_int(struct mthca_dev *dev, struct mthca_eq *eq) IB_EVENT_SQ_DRAINED); break; + case MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE: + mthca_qp_event(dev, be32_to_cpu(eqe->event.qp.qpn) & 0xffffff, + IB_EVENT_QP_LAST_WQE_REACHED); + break; + + case MTHCA_EVENT_TYPE_SRQ_LIMIT: + mthca_srq_event(dev, be32_to_cpu(eqe->event.srq.srqn) & 0xffffff, + IB_EVENT_SRQ_LIMIT_REACHED); + break; + case MTHCA_EVENT_TYPE_WQ_CATAS_ERROR: mthca_qp_event(dev, be32_to_cpu(eqe->event.qp.qpn) & 0xffffff, IB_EVENT_QP_FATAL); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 4e87ad115712..53b29a0841bf 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1084,6 +1084,7 @@ int mthca_register_device(struct mthca_dev *dev) if (dev->mthca_flags & MTHCA_FLAG_SRQ) { dev->ib_dev.create_srq = mthca_create_srq; + dev->ib_dev.modify_srq = mthca_modify_srq; dev->ib_dev.destroy_srq = mthca_destroy_srq; if (mthca_is_memfree(dev)) diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 18998d48c53e..13d2290261d9 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -332,6 +332,29 @@ void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq) mthca_free_mailbox(dev, mailbox); } +int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, + enum ib_srq_attr_mask attr_mask) +{ + struct mthca_dev *dev = to_mdev(ibsrq->device); + struct mthca_srq *srq = to_msrq(ibsrq); + int ret; + u8 status; + + /* We don't support resizing SRQs (yet?) */ + if (attr_mask & IB_SRQ_MAX_WR) + return -EINVAL; + + if (attr_mask & IB_SRQ_LIMIT) { + ret = mthca_ARM_SRQ(dev, srq->srqn, attr->srq_limit, &status); + if (ret) + return ret; + if (status) + return -EINVAL; + } + + return 0; +} + void mthca_srq_event(struct mthca_dev *dev, u32 srqn, enum ib_event_type event_type) { @@ -354,7 +377,7 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn, event.device = &dev->ib_dev; event.event = event_type; - event.element.srq = &srq->ibsrq; + event.element.srq = &srq->ibsrq; srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context); out: -- cgit v1.2.3 From e23d6d2b090658007732770720a44375cba23200 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 6 Oct 2005 13:25:16 -0700 Subject: [IB] mthca: detect SRQ overflow The hardware relies on us keeping one extra work request that never gets used in SRQs. Add checks to the SRQ work request posting functions so that they fail when someone is about to use up that extra work request, rather than when someone uses the very last work request. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_srq.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 13d2290261d9..e464321a7aa7 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -438,6 +438,14 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, wqe = get_wqe(srq, ind); next_ind = *wqe_to_link(wqe); + + if (next_ind < 0) { + mthca_err(dev, "SRQ %06x full\n", srq->srqn); + err = -ENOMEM; + *bad_wr = wr; + break; + } + prev_wqe = srq->last; srq->last = wqe; @@ -529,6 +537,13 @@ int mthca_arbel_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, wqe = get_wqe(srq, ind); next_ind = *wqe_to_link(wqe); + if (next_ind < 0) { + mthca_err(dev, "SRQ %06x full\n", srq->srqn); + err = -ENOMEM; + *bad_wr = wr; + break; + } + ((struct mthca_next_seg *) wqe)->nda_op = cpu_to_be32((next_ind << srq->wqe_shift) | 1); ((struct mthca_next_seg *) wqe)->ee_nds = 0; -- cgit v1.2.3 From 4ab6fb7e5b3d34b65a1c3473d80d9d1a462d3a49 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 6 Oct 2005 13:28:16 -0700 Subject: [IB] Fix leak on MAD initialization failure There is a bug in ib_mad_init_device(): if ib_agent_port_open() fails for a given port, then the current code doesn't call ib_mad_port_close() for that port. Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 45 +++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index a14ca87fda18..af302e830561 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -2683,40 +2683,47 @@ static int ib_mad_port_close(struct ib_device *device, int port_num) static void ib_mad_init_device(struct ib_device *device) { - int num_ports, cur_port, i; + int start, end, i; if (device->node_type == IB_NODE_SWITCH) { - num_ports = 1; - cur_port = 0; + start = 0; + end = 0; } else { - num_ports = device->phys_port_cnt; - cur_port = 1; + start = 1; + end = device->phys_port_cnt; } - for (i = 0; i < num_ports; i++, cur_port++) { - if (ib_mad_port_open(device, cur_port)) { + + for (i = start; i <= end; i++) { + if (ib_mad_port_open(device, i)) { printk(KERN_ERR PFX "Couldn't open %s port %d\n", - device->name, cur_port); - goto error_device_open; + device->name, i); + goto error; } - if (ib_agent_port_open(device, cur_port)) { + if (ib_agent_port_open(device, i)) { printk(KERN_ERR PFX "Couldn't open %s port %d " "for agents\n", - device->name, cur_port); - goto error_device_open; + device->name, i); + goto error_agent; } } return; -error_device_open: - while (i > 0) { - cur_port--; - if (ib_agent_port_close(device, cur_port)) +error_agent: + if (ib_mad_port_close(device, i)) + printk(KERN_ERR PFX "Couldn't close %s port %d\n", + device->name, i); + +error: + i--; + + while (i >= start) { + if (ib_agent_port_close(device, i)) printk(KERN_ERR PFX "Couldn't close %s port %d " "for agents\n", - device->name, cur_port); - if (ib_mad_port_close(device, cur_port)) + device->name, i); + if (ib_mad_port_close(device, i)) printk(KERN_ERR PFX "Couldn't close %s port %d\n", - device->name, cur_port); + device->name, i); i--; } } -- cgit v1.2.3 From efaae8f71f3088cc73c9e5ceabbd314aa82ac768 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 10 Oct 2005 13:48:07 -0700 Subject: [IB] mthca: Better limit checking and reporting Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cmd.c | 6 ++++-- drivers/infiniband/hw/mthca/mthca_dev.h | 6 ++++++ drivers/infiniband/hw/mthca/mthca_main.c | 9 +++++++++ drivers/infiniband/hw/mthca/mthca_mcg.c | 4 ---- drivers/infiniband/hw/mthca/mthca_provider.c | 18 +++++++++++++++--- drivers/infiniband/hw/mthca/mthca_qp.c | 6 ++++-- drivers/infiniband/hw/mthca/mthca_srq.c | 3 ++- 7 files changed, 40 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index f6a8ac026557..1bd7dc8f778c 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -933,9 +933,9 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, goto out; MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_SRQ_SZ_OFFSET); - dev_lim->max_srq_sz = 1 << field; + dev_lim->max_srq_sz = (1 << field) - 1; MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_QP_SZ_OFFSET); - dev_lim->max_qp_sz = 1 << field; + dev_lim->max_qp_sz = (1 << field) - 1; MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_QP_OFFSET); dev_lim->reserved_qps = 1 << (field & 0xf); MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_QP_OFFSET); @@ -1045,6 +1045,8 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, dev_lim->max_pds, dev_lim->reserved_pds, dev_lim->reserved_uars); mthca_dbg(dev, "Max QP/MCG: %d, reserved MGMs: %d\n", dev_lim->max_pds, dev_lim->reserved_mgms); + mthca_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n", + dev_lim->max_cq_sz, dev_lim->max_qp_sz, dev_lim->max_srq_sz); mthca_dbg(dev, "Flags: %08x\n", dev_lim->flags); diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 6e18c128af42..f106bac0f925 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -83,6 +83,8 @@ enum { /* Arbel FW gives us these, but we need them for Tavor */ MTHCA_MPT_ENTRY_SIZE = 0x40, MTHCA_MTT_SEG_SIZE = 0x40, + + MTHCA_QP_PER_MGM = 4 * (MTHCA_MGM_ENTRY_SIZE / 16 - 2) }; enum { @@ -128,12 +130,16 @@ struct mthca_limits { int num_uars; int max_sg; int num_qps; + int max_wqes; + int max_qp_init_rdma; int reserved_qps; int num_srqs; + int max_srq_wqes; int reserved_srqs; int num_eecs; int reserved_eecs; int num_cqs; + int max_cqes; int reserved_cqs; int num_eqs; int reserved_eqs; diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 576e7fcd053c..7c35abec81ea 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -162,9 +162,18 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim mdev->limits.pkey_table_len = dev_lim->max_pkeys; mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay; mdev->limits.max_sg = dev_lim->max_sg; + mdev->limits.max_wqes = dev_lim->max_qp_sz; + mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp; mdev->limits.reserved_qps = dev_lim->reserved_qps; + mdev->limits.max_srq_wqes = dev_lim->max_srq_sz; mdev->limits.reserved_srqs = dev_lim->reserved_srqs; mdev->limits.reserved_eecs = dev_lim->reserved_eecs; + /* + * Subtract 1 from the limit because we need to allocate a + * spare CQE so the HCA HW can tell the difference between an + * empty CQ and a full CQ. + */ + mdev->limits.max_cqes = dev_lim->max_cq_sz - 1; mdev->limits.reserved_cqs = dev_lim->reserved_cqs; mdev->limits.reserved_eqs = dev_lim->reserved_eqs; mdev->limits.reserved_mtts = dev_lim->reserved_mtts; diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index a2707605f4c8..9a0612a9d304 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -37,10 +37,6 @@ #include "mthca_dev.h" #include "mthca_cmd.h" -enum { - MTHCA_QP_PER_MGM = 4 * (MTHCA_MGM_ENTRY_SIZE / 16 - 2) -}; - struct mthca_mgm { __be32 next_gid_index; u32 reserved[3]; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 53b29a0841bf..46864d18827d 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -90,17 +90,26 @@ static int mthca_query_device(struct ib_device *ibdev, props->max_mr_size = ~0ull; props->max_qp = mdev->limits.num_qps - mdev->limits.reserved_qps; - props->max_qp_wr = 0xffff; + props->max_qp_wr = mdev->limits.max_wqes; props->max_sge = mdev->limits.max_sg; props->max_cq = mdev->limits.num_cqs - mdev->limits.reserved_cqs; - props->max_cqe = 0xffff; + props->max_cqe = mdev->limits.max_cqes; props->max_mr = mdev->limits.num_mpts - mdev->limits.reserved_mrws; props->max_pd = mdev->limits.num_pds - mdev->limits.reserved_pds; props->max_qp_rd_atom = 1 << mdev->qp_table.rdb_shift; - props->max_qp_init_rd_atom = 1 << mdev->qp_table.rdb_shift; + props->max_qp_init_rd_atom = mdev->limits.max_qp_init_rdma; + props->max_res_rd_atom = props->max_qp_rd_atom * props->max_qp; + props->max_srq = mdev->limits.num_srqs - mdev->limits.reserved_srqs; + props->max_srq_wr = mdev->limits.max_srq_wqes; + props->max_srq_sge = mdev->limits.max_sg; props->local_ca_ack_delay = mdev->limits.local_ca_ack_delay; props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ? IB_ATOMIC_HCA : IB_ATOMIC_NONE; + props->max_pkeys = mdev->limits.pkey_table_len; + props->max_mcast_grp = mdev->limits.num_mgms + mdev->limits.num_amgms; + props->max_mcast_qp_attach = MTHCA_QP_PER_MGM; + props->max_total_mcast_qp_attach = props->max_mcast_qp_attach * + props->max_mcast_grp; err = 0; out: @@ -640,6 +649,9 @@ static struct ib_cq *mthca_create_cq(struct ib_device *ibdev, int entries, int nent; int err; + if (entries < 1 || entries > to_mdev(ibdev)->limits.max_cqes) + return ERR_PTR(-EINVAL); + if (context) { if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd)) return ERR_PTR(-EFAULT); diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 5fa00669f9b8..2ee0a2b0fd4b 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1112,8 +1112,10 @@ static int mthca_set_qp_size(struct mthca_dev *dev, struct ib_qp_cap *cap, struct mthca_qp *qp) { /* Sanity check QP size before proceeding */ - if (cap->max_send_wr > 65536 || cap->max_recv_wr > 65536 || - cap->max_send_sge > 64 || cap->max_recv_sge > 64) + if (cap->max_send_wr > dev->limits.max_wqes || + cap->max_recv_wr > dev->limits.max_wqes || + cap->max_send_sge > dev->limits.max_sg || + cap->max_recv_sge > dev->limits.max_sg) return -EINVAL; if (mthca_is_memfree(dev)) { diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index e464321a7aa7..64f70aa1b3c0 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -186,7 +186,8 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, int err; /* Sanity check SRQ size before proceeding */ - if (attr->max_wr > 16 << 20 || attr->max_sge > 64) + if (attr->max_wr > dev->limits.max_srq_wqes || + attr->max_sge > dev->limits.max_sg) return -EINVAL; srq->max = attr->max_wr; -- cgit v1.2.3 From 5b6810e048435de508ef66aebd6b78db13d651b8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 11 Oct 2005 11:08:24 -0700 Subject: [IPoIB] Rename ipoib_create_qp() -> ipoib_init_qp() and fix error cleanup ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't destroy the QP on failure -- that unwinding happens elsewhere, so the current code can cause a double free. While we're at it, the function's name should match what it actually does, so rename it to ipoib_init_qp(). Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 2 +- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 4 ++-- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 9 +++++---- 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 4ea1c1ca85bc..6b14bd1c60a0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -277,7 +277,7 @@ int ipoib_mcast_attach(struct net_device *dev, u16 mlid, int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid); -int ipoib_qp_create(struct net_device *dev); +int ipoib_init_qp(struct net_device *dev); int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca); void ipoib_transport_dev_cleanup(struct net_device *dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index f7440096b5ed..02d0e0006578 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -387,9 +387,9 @@ int ipoib_ib_dev_open(struct net_device *dev) struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; - ret = ipoib_qp_create(dev); + ret = ipoib_init_qp(dev); if (ret) { - ipoib_warn(priv, "ipoib_qp_create returned %d\n", ret); + ipoib_warn(priv, "ipoib_init_qp returned %d\n", ret); return -1; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 79f59d0563ed..b5902a7ec240 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -92,7 +92,7 @@ int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid) return ret; } -int ipoib_qp_create(struct net_device *dev) +int ipoib_init_qp(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; @@ -149,10 +149,11 @@ int ipoib_qp_create(struct net_device *dev) return 0; out_fail: - ib_destroy_qp(priv->qp); - priv->qp = NULL; + qp_attr.qp_state = IB_QPS_RESET; + if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE)) + ipoib_warn(priv, "Failed to modify QP to RESET state\n"); - return -EINVAL; + return ret; } int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) -- cgit v1.2.3 From 305a7e87055dde2466a855c24ef51a606915d149 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 11 Oct 2005 15:39:38 -0700 Subject: [IB] uverbs: unlock correctly in error paths A couple of functions were missing spin_unlock calls in error paths. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index c84cc28b60ee..3a887006b253 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -312,8 +312,10 @@ void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context) } entry = kmalloc(sizeof *entry, GFP_ATOMIC); - if (!entry) + if (!entry) { + spin_unlock_irqrestore(&file->lock, flags); return; + } uobj = container_of(cq->uobject, struct ib_ucq_object, uobject); @@ -343,8 +345,10 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, } entry = kmalloc(sizeof *entry, GFP_ATOMIC); - if (!entry) + if (!entry) { + spin_unlock_irqrestore(&file->async_file->lock, flags); return; + } entry->desc.async.element = element; entry->desc.async.event_type = event; -- cgit v1.2.3 From 56c202d6e4f542468fe79b8a735cf128898b87fb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 13 Oct 2005 10:45:02 -0700 Subject: [IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier --- drivers/infiniband/core/sa_query.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 262618210c1c..a2c4234ca8a3 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -583,10 +583,16 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, { struct ib_sa_path_query *query; struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); - struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port]; - struct ib_mad_agent *agent = port->agent; + struct ib_sa_port *port; + struct ib_mad_agent *agent; int ret; + if (!sa_dev) + return -ENODEV; + + port = &sa_dev->port[port_num - sa_dev->start_port]; + agent = port->agent; + query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; @@ -685,10 +691,16 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, { struct ib_sa_service_query *query; struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); - struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port]; - struct ib_mad_agent *agent = port->agent; + struct ib_sa_port *port; + struct ib_mad_agent *agent; int ret; + if (!sa_dev) + return -ENODEV; + + port = &sa_dev->port[port_num - sa_dev->start_port]; + agent = port->agent; + if (method != IB_MGMT_METHOD_GET && method != IB_MGMT_METHOD_SET && method != IB_SA_METHOD_DELETE) @@ -768,10 +780,16 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, { struct ib_sa_mcmember_query *query; struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); - struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port]; - struct ib_mad_agent *agent = port->agent; + struct ib_sa_port *port; + struct ib_mad_agent *agent; int ret; + if (!sa_dev) + return -ENODEV; + + port = &sa_dev->port[port_num - sa_dev->start_port]; + agent = port->agent; + query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; -- cgit v1.2.3 From 883a99c7024c5763d6d4f22d9239c133893e8d74 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 14 Oct 2005 14:00:58 -0700 Subject: [IB] uverbs: Add a mask of device methods allowed for userspace Give each device a uverbs_cmd_mask, so that a low-level driver can control which methods may be called on behalf of userspace. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 3 ++- drivers/infiniband/hw/mthca/mthca_provider.c | 20 ++++++++++++++++++++ include/rdma/ib_verbs.h | 1 + 3 files changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 3a887006b253..6a5e5084db7a 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -514,7 +514,8 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, if (hdr.command < 0 || hdr.command >= ARRAY_SIZE(uverbs_cmd_table) || - !uverbs_cmd_table[hdr.command]) + !uverbs_cmd_table[hdr.command] || + !(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command))) return -EINVAL; if (!file->ucontext && diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 46864d18827d..9e911a1ea415 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -37,6 +37,7 @@ */ #include +#include #include #include "mthca_dev.h" @@ -1077,6 +1078,25 @@ int mthca_register_device(struct mthca_dev *dev) dev->ib_dev.owner = THIS_MODULE; dev->ib_dev.uverbs_abi_ver = MTHCA_UVERBS_ABI_VERSION; + dev->ib_dev.uverbs_cmd_mask = + (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | + (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) | + (1ull << IB_USER_VERBS_CMD_QUERY_PORT) | + (1ull << IB_USER_VERBS_CMD_ALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_REG_MR) | + (1ull << IB_USER_VERBS_CMD_DEREG_MR) | + (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) | + (1ull << IB_USER_VERBS_CMD_CREATE_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) | + (1ull << IB_USER_VERBS_CMD_CREATE_QP) | + (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | + (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | + (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) | + (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) | + (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | + (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ); dev->ib_dev.node_type = IB_NODE_CA; dev->ib_dev.phys_port_cnt = dev->limits.num_ports; dev->ib_dev.dma_device = &dev->pdev->dev; diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index d13f25a78192..a5a963cb5676 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -951,6 +951,7 @@ struct ib_device { IB_DEV_UNREGISTERED } reg_state; + u64 uverbs_cmd_mask; int uverbs_abi_ver; u8 node_type; -- cgit v1.2.3 From 67cdb40ca444c09853ab4d8a41cf547ac26a4de4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 14 Oct 2005 15:26:04 -0700 Subject: [IB] uverbs: Implement more commands Add kernel support for userspace calling poll CQ, request CQ notification, post send, post receive, post SRQ receive, create AH and destroy AH commands. These commands allow us to support userspace verbs for devices that can't perform these operations directly from userspace (eg the PathScale HCA). Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 8 + drivers/infiniband/core/uverbs_cmd.c | 549 ++++++++++++++++++++++++++++++++++ drivers/infiniband/core/uverbs_main.c | 16 +- 3 files changed, 572 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 475153e510a9..63c8085c0c98 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -3,6 +3,7 @@ * Copyright (c) 2005 Cisco Systems. All rights reserved. * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * Copyright (c) 2005 Voltaire, Inc. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -140,10 +141,17 @@ IB_UVERBS_DECLARE_CMD(reg_mr); IB_UVERBS_DECLARE_CMD(dereg_mr); IB_UVERBS_DECLARE_CMD(create_comp_channel); IB_UVERBS_DECLARE_CMD(create_cq); +IB_UVERBS_DECLARE_CMD(poll_cq); +IB_UVERBS_DECLARE_CMD(req_notify_cq); IB_UVERBS_DECLARE_CMD(destroy_cq); IB_UVERBS_DECLARE_CMD(create_qp); IB_UVERBS_DECLARE_CMD(modify_qp); IB_UVERBS_DECLARE_CMD(destroy_qp); +IB_UVERBS_DECLARE_CMD(post_send); +IB_UVERBS_DECLARE_CMD(post_recv); +IB_UVERBS_DECLARE_CMD(post_srq_recv); +IB_UVERBS_DECLARE_CMD(create_ah); +IB_UVERBS_DECLARE_CMD(destroy_ah); IB_UVERBS_DECLARE_CMD(attach_mcast); IB_UVERBS_DECLARE_CMD(detach_mcast); IB_UVERBS_DECLARE_CMD(create_srq); diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 2e959acf2ff1..14583bb6e2c0 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -665,6 +665,93 @@ err: return ret; } +ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_poll_cq cmd; + struct ib_uverbs_poll_cq_resp *resp; + struct ib_cq *cq; + struct ib_wc *wc; + int ret = 0; + int i; + int rsize; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL); + if (!wc) + return -ENOMEM; + + rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc); + resp = kmalloc(rsize, GFP_KERNEL); + if (!resp) { + ret = -ENOMEM; + goto out_wc; + } + + down(&ib_uverbs_idr_mutex); + cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle); + if (!cq || cq->uobject->context != file->ucontext) { + ret = -EINVAL; + goto out; + } + + resp->count = ib_poll_cq(cq, cmd.ne, wc); + + for (i = 0; i < resp->count; i++) { + resp->wc[i].wr_id = wc[i].wr_id; + resp->wc[i].status = wc[i].status; + resp->wc[i].opcode = wc[i].opcode; + resp->wc[i].vendor_err = wc[i].vendor_err; + resp->wc[i].byte_len = wc[i].byte_len; + resp->wc[i].imm_data = wc[i].imm_data; + resp->wc[i].qp_num = wc[i].qp_num; + resp->wc[i].src_qp = wc[i].src_qp; + resp->wc[i].wc_flags = wc[i].wc_flags; + resp->wc[i].pkey_index = wc[i].pkey_index; + resp->wc[i].slid = wc[i].slid; + resp->wc[i].sl = wc[i].sl; + resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits; + resp->wc[i].port_num = wc[i].port_num; + } + + if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + kfree(resp); + +out_wc: + kfree(wc); + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_req_notify_cq cmd; + struct ib_cq *cq; + int ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + down(&ib_uverbs_idr_mutex); + cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle); + if (cq && cq->uobject->context == file->ucontext) { + ib_req_notify_cq(cq, cmd.solicited_only ? + IB_CQ_SOLICITED : IB_CQ_NEXT_COMP); + ret = in_len; + } + up(&ib_uverbs_idr_mutex); + + return ret; +} + ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -1003,6 +1090,468 @@ out: return ret ? ret : in_len; } +ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_post_send cmd; + struct ib_uverbs_post_send_resp resp; + struct ib_uverbs_send_wr *user_wr; + struct ib_send_wr *wr = NULL, *last, *next, *bad_wr; + struct ib_qp *qp; + int i, sg_ind; + ssize_t ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + if (in_len < sizeof cmd + cmd.wqe_size * cmd.wr_count + + cmd.sge_count * sizeof (struct ib_uverbs_sge)) + return -EINVAL; + + if (cmd.wqe_size < sizeof (struct ib_uverbs_send_wr)) + return -EINVAL; + + user_wr = kmalloc(cmd.wqe_size, GFP_KERNEL); + if (!user_wr) + return -ENOMEM; + + down(&ib_uverbs_idr_mutex); + + qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle); + if (!qp || qp->uobject->context != file->ucontext) + goto out; + + sg_ind = 0; + last = NULL; + for (i = 0; i < cmd.wr_count; ++i) { + if (copy_from_user(user_wr, + buf + sizeof cmd + i * cmd.wqe_size, + cmd.wqe_size)) { + ret = -EFAULT; + goto out; + } + + if (user_wr->num_sge + sg_ind > cmd.sge_count) { + ret = -EINVAL; + goto out; + } + + next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) + + user_wr->num_sge * sizeof (struct ib_sge), + GFP_KERNEL); + if (!next) { + ret = -ENOMEM; + goto out; + } + + if (!last) + wr = next; + else + last->next = next; + last = next; + + next->next = NULL; + next->wr_id = user_wr->wr_id; + next->num_sge = user_wr->num_sge; + next->opcode = user_wr->opcode; + next->send_flags = user_wr->send_flags; + next->imm_data = user_wr->imm_data; + + if (qp->qp_type == IB_QPT_UD) { + next->wr.ud.ah = idr_find(&ib_uverbs_ah_idr, + user_wr->wr.ud.ah); + if (!next->wr.ud.ah) { + ret = -EINVAL; + goto out; + } + next->wr.ud.remote_qpn = user_wr->wr.ud.remote_qpn; + next->wr.ud.remote_qkey = user_wr->wr.ud.remote_qkey; + } else { + switch (next->opcode) { + case IB_WR_RDMA_WRITE: + case IB_WR_RDMA_WRITE_WITH_IMM: + case IB_WR_RDMA_READ: + next->wr.rdma.remote_addr = + user_wr->wr.rdma.remote_addr; + next->wr.rdma.rkey = + user_wr->wr.rdma.rkey; + break; + case IB_WR_ATOMIC_CMP_AND_SWP: + case IB_WR_ATOMIC_FETCH_AND_ADD: + next->wr.atomic.remote_addr = + user_wr->wr.atomic.remote_addr; + next->wr.atomic.compare_add = + user_wr->wr.atomic.compare_add; + next->wr.atomic.swap = user_wr->wr.atomic.swap; + next->wr.atomic.rkey = user_wr->wr.atomic.rkey; + break; + default: + break; + } + } + + if (next->num_sge) { + next->sg_list = (void *) next + + ALIGN(sizeof *next, sizeof (struct ib_sge)); + if (copy_from_user(next->sg_list, + buf + sizeof cmd + + cmd.wr_count * cmd.wqe_size + + sg_ind * sizeof (struct ib_sge), + next->num_sge * sizeof (struct ib_sge))) { + ret = -EFAULT; + goto out; + } + sg_ind += next->num_sge; + } else + next->sg_list = NULL; + } + + resp.bad_wr = 0; + ret = qp->device->post_send(qp, wr, &bad_wr); + if (ret) + for (next = wr; next; next = next->next) { + ++resp.bad_wr; + if (next == bad_wr) + break; + } + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + kfree(user_wr); + + return ret ? ret : in_len; +} + +static struct ib_recv_wr *ib_uverbs_unmarshall_recv(const char __user *buf, + int in_len, + u32 wr_count, + u32 sge_count, + u32 wqe_size) +{ + struct ib_uverbs_recv_wr *user_wr; + struct ib_recv_wr *wr = NULL, *last, *next; + int sg_ind; + int i; + int ret; + + if (in_len < wqe_size * wr_count + + sge_count * sizeof (struct ib_uverbs_sge)) + return ERR_PTR(-EINVAL); + + if (wqe_size < sizeof (struct ib_uverbs_recv_wr)) + return ERR_PTR(-EINVAL); + + user_wr = kmalloc(wqe_size, GFP_KERNEL); + if (!user_wr) + return ERR_PTR(-ENOMEM); + + sg_ind = 0; + last = NULL; + for (i = 0; i < wr_count; ++i) { + if (copy_from_user(user_wr, buf + i * wqe_size, + wqe_size)) { + ret = -EFAULT; + goto err; + } + + if (user_wr->num_sge + sg_ind > sge_count) { + ret = -EINVAL; + goto err; + } + + next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) + + user_wr->num_sge * sizeof (struct ib_sge), + GFP_KERNEL); + if (!next) { + ret = -ENOMEM; + goto err; + } + + if (!last) + wr = next; + else + last->next = next; + last = next; + + next->next = NULL; + next->wr_id = user_wr->wr_id; + next->num_sge = user_wr->num_sge; + + if (next->num_sge) { + next->sg_list = (void *) next + + ALIGN(sizeof *next, sizeof (struct ib_sge)); + if (copy_from_user(next->sg_list, + buf + wr_count * wqe_size + + sg_ind * sizeof (struct ib_sge), + next->num_sge * sizeof (struct ib_sge))) { + ret = -EFAULT; + goto err; + } + sg_ind += next->num_sge; + } else + next->sg_list = NULL; + } + + kfree(user_wr); + return wr; + +err: + kfree(user_wr); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + return ERR_PTR(ret); +} + +ssize_t ib_uverbs_post_recv(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_post_recv cmd; + struct ib_uverbs_post_recv_resp resp; + struct ib_recv_wr *wr, *next, *bad_wr; + struct ib_qp *qp; + ssize_t ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd, + in_len - sizeof cmd, cmd.wr_count, + cmd.sge_count, cmd.wqe_size); + if (IS_ERR(wr)) + return PTR_ERR(wr); + + down(&ib_uverbs_idr_mutex); + + qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle); + if (!qp || qp->uobject->context != file->ucontext) + goto out; + + resp.bad_wr = 0; + ret = qp->device->post_recv(qp, wr, &bad_wr); + if (ret) + for (next = wr; next; next = next->next) { + ++resp.bad_wr; + if (next == bad_wr) + break; + } + + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_post_srq_recv(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_post_srq_recv cmd; + struct ib_uverbs_post_srq_recv_resp resp; + struct ib_recv_wr *wr, *next, *bad_wr; + struct ib_srq *srq; + ssize_t ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd, + in_len - sizeof cmd, cmd.wr_count, + cmd.sge_count, cmd.wqe_size); + if (IS_ERR(wr)) + return PTR_ERR(wr); + + down(&ib_uverbs_idr_mutex); + + srq = idr_find(&ib_uverbs_srq_idr, cmd.srq_handle); + if (!srq || srq->uobject->context != file->ucontext) + goto out; + + resp.bad_wr = 0; + ret = srq->device->post_srq_recv(srq, wr, &bad_wr); + if (ret) + for (next = wr; next; next = next->next) { + ++resp.bad_wr; + if (next == bad_wr) + break; + } + + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_create_ah(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_create_ah cmd; + struct ib_uverbs_create_ah_resp resp; + struct ib_uobject *uobj; + struct ib_pd *pd; + struct ib_ah *ah; + struct ib_ah_attr attr; + int ret; + + if (out_len < sizeof resp) + return -ENOSPC; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + uobj = kmalloc(sizeof *uobj, GFP_KERNEL); + if (!uobj) + return -ENOMEM; + + down(&ib_uverbs_idr_mutex); + + pd = idr_find(&ib_uverbs_pd_idr, cmd.pd_handle); + if (!pd || pd->uobject->context != file->ucontext) { + ret = -EINVAL; + goto err_up; + } + + uobj->user_handle = cmd.user_handle; + uobj->context = file->ucontext; + + attr.dlid = cmd.attr.dlid; + attr.sl = cmd.attr.sl; + attr.src_path_bits = cmd.attr.src_path_bits; + attr.static_rate = cmd.attr.static_rate; + attr.port_num = cmd.attr.port_num; + attr.grh.flow_label = cmd.attr.grh.flow_label; + attr.grh.sgid_index = cmd.attr.grh.sgid_index; + attr.grh.hop_limit = cmd.attr.grh.hop_limit; + attr.grh.traffic_class = cmd.attr.grh.traffic_class; + memcpy(attr.grh.dgid.raw, cmd.attr.grh.dgid, 16); + + ah = ib_create_ah(pd, &attr); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); + goto err_up; + } + + ah->uobject = uobj; + +retry: + if (!idr_pre_get(&ib_uverbs_ah_idr, GFP_KERNEL)) { + ret = -ENOMEM; + goto err_destroy; + } + + ret = idr_get_new(&ib_uverbs_ah_idr, ah, &uobj->id); + + if (ret == -EAGAIN) + goto retry; + if (ret) + goto err_destroy; + + resp.ah_handle = uobj->id; + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) { + ret = -EFAULT; + goto err_idr; + } + + down(&file->mutex); + list_add_tail(&uobj->list, &file->ucontext->ah_list); + up(&file->mutex); + + up(&ib_uverbs_idr_mutex); + + return in_len; + +err_idr: + idr_remove(&ib_uverbs_ah_idr, uobj->id); + +err_destroy: + ib_destroy_ah(ah); + +err_up: + up(&ib_uverbs_idr_mutex); + + kfree(uobj); + return ret; +} + +ssize_t ib_uverbs_destroy_ah(struct ib_uverbs_file *file, + const char __user *buf, int in_len, int out_len) +{ + struct ib_uverbs_destroy_ah cmd; + struct ib_ah *ah; + struct ib_uobject *uobj; + int ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + down(&ib_uverbs_idr_mutex); + + ah = idr_find(&ib_uverbs_ah_idr, cmd.ah_handle); + if (!ah || ah->uobject->context != file->ucontext) + goto out; + + uobj = ah->uobject; + + ret = ib_destroy_ah(ah); + if (ret) + goto out; + + idr_remove(&ib_uverbs_ah_idr, cmd.ah_handle); + + down(&file->mutex); + list_del(&uobj->list); + up(&file->mutex); + + kfree(uobj); + +out: + up(&ib_uverbs_idr_mutex); + + return ret ? ret : in_len; +} + ssize_t ib_uverbs_attach_mcast(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 6a5e5084db7a..ef2312a9ea76 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -3,6 +3,7 @@ * Copyright (c) 2005 Cisco Systems. All rights reserved. * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * Copyright (c) 2005 Voltaire, Inc. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -86,10 +87,17 @@ static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr, [IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL] = ib_uverbs_create_comp_channel, [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq, + [IB_USER_VERBS_CMD_POLL_CQ] = ib_uverbs_poll_cq, + [IB_USER_VERBS_CMD_REQ_NOTIFY_CQ] = ib_uverbs_req_notify_cq, [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq, [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp, [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp, [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, + [IB_USER_VERBS_CMD_POST_SEND] = ib_uverbs_post_send, + [IB_USER_VERBS_CMD_POST_RECV] = ib_uverbs_post_recv, + [IB_USER_VERBS_CMD_POST_SRQ_RECV] = ib_uverbs_post_srq_recv, + [IB_USER_VERBS_CMD_CREATE_AH] = ib_uverbs_create_ah, + [IB_USER_VERBS_CMD_DESTROY_AH] = ib_uverbs_destroy_ah, [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, @@ -111,7 +119,13 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) down(&ib_uverbs_idr_mutex); - /* XXX Free AHs */ + list_for_each_entry_safe(uobj, tmp, &context->ah_list, list) { + struct ib_ah *ah = idr_find(&ib_uverbs_ah_idr, uobj->id); + idr_remove(&ib_uverbs_ah_idr, uobj->id); + ib_destroy_ah(ah); + list_del(&uobj->list); + kfree(uobj); + } list_for_each_entry_safe(uobj, tmp, &context->qp_list, list) { struct ib_qp *qp = idr_find(&ib_uverbs_qp_idr, uobj->id); -- cgit v1.2.3 From 595e726a1f28420c5fc7970b1a87cbce77a1cd45 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 17 Oct 2005 15:33:47 -0700 Subject: [IB] merge ucm.h into ucm.c Eliminate ucm.h. Replace ucm_dbg with direct call to printk KERN_ERR. Signed-off-by: Sean Hefty --- drivers/infiniband/core/ucm.c | 62 +++++++++++++++++++++----------- drivers/infiniband/core/ucm.h | 83 ------------------------------------------- 2 files changed, 41 insertions(+), 104 deletions(-) delete mode 100644 drivers/infiniband/core/ucm.h (limited to 'drivers') diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d0f0b0a2edd3..b7470f0fe83b 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -41,19 +41,52 @@ #include #include #include +#include #include -#include "ucm.h" +#include +#include MODULE_AUTHOR("Libor Michalek"); MODULE_DESCRIPTION("InfiniBand userspace Connection Manager access"); MODULE_LICENSE("Dual BSD/GPL"); -static int ucm_debug_level; +struct ib_ucm_file { + struct semaphore mutex; + struct file *filp; -module_param_named(debug_level, ucm_debug_level, int, 0644); -MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0"); + struct list_head ctxs; /* list of active connections */ + struct list_head events; /* list of pending events */ + wait_queue_head_t poll_wait; +}; + +struct ib_ucm_context { + int id; + wait_queue_head_t wait; + atomic_t ref; + int events_reported; + + struct ib_ucm_file *file; + struct ib_cm_id *cm_id; + __u64 uid; + + struct list_head events; /* list of pending events. */ + struct list_head file_list; /* member in file ctx list */ +}; + +struct ib_ucm_event { + struct ib_ucm_context *ctx; + struct list_head file_list; /* member in file event list */ + struct list_head ctx_list; /* member in ctx event list */ + + struct ib_cm_id *cm_id; + struct ib_ucm_event_resp resp; + void *data; + void *info; + int data_len; + int info_len; +}; enum { IB_UCM_MAJOR = 231, @@ -62,17 +95,10 @@ enum { #define IB_UCM_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_MINOR) -#define PFX "UCM: " - -#define ucm_dbg(format, arg...) \ - do { \ - if (ucm_debug_level > 0) \ - printk(KERN_DEBUG PFX format, ## arg); \ - } while (0) - static struct semaphore ctx_id_mutex; static struct idr ctx_id_table; + static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) { struct ib_ucm_context *ctx; @@ -152,7 +178,6 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file) goto error; list_add_tail(&ctx->file_list, &file->ctxs); - ucm_dbg("Allocated CM ID <%d>\n", ctx->id); return ctx; error: @@ -1184,9 +1209,6 @@ static ssize_t ib_ucm_write(struct file *filp, const char __user *buf, if (copy_from_user(&hdr, buf, sizeof(hdr))) return -EFAULT; - ucm_dbg("Write. cmd <%d> in <%d> out <%d> len <%Zu>\n", - hdr.cmd, hdr.in, hdr.out, len); - if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucm_cmd_table)) return -EINVAL; @@ -1232,8 +1254,6 @@ static int ib_ucm_open(struct inode *inode, struct file *filp) filp->private_data = file; file->filp = filp; - ucm_dbg("Created struct\n"); - return 0; } @@ -1281,7 +1301,7 @@ static int __init ib_ucm_init(void) result = register_chrdev_region(IB_UCM_DEV, 1, "infiniband_cm"); if (result) { - ucm_dbg("Error <%d> registering dev\n", result); + printk(KERN_ERR "ucm: Error <%d> registering dev\n", result); goto err_chr; } @@ -1289,14 +1309,14 @@ static int __init ib_ucm_init(void) result = cdev_add(&ib_ucm_cdev, IB_UCM_DEV, 1); if (result) { - ucm_dbg("Error <%d> adding cdev\n", result); + printk(KERN_ERR "ucm: Error <%d> adding cdev\n", result); goto err_cdev; } ib_ucm_class = class_create(THIS_MODULE, "infiniband_cm"); if (IS_ERR(ib_ucm_class)) { result = PTR_ERR(ib_ucm_class); - ucm_dbg("Error <%d> creating class\n", result); + printk(KERN_ERR "Error <%d> creating class\n", result); goto err_class; } diff --git a/drivers/infiniband/core/ucm.h b/drivers/infiniband/core/ucm.h deleted file mode 100644 index f46f37bc1201..000000000000 --- a/drivers/infiniband/core/ucm.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (c) 2005 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Intel Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ucm.h 2208 2005-04-22 23:24:31Z libor $ - */ - -#ifndef UCM_H -#define UCM_H - -#include -#include -#include -#include - -#include -#include - -struct ib_ucm_file { - struct semaphore mutex; - struct file *filp; - - struct list_head ctxs; /* list of active connections */ - struct list_head events; /* list of pending events */ - wait_queue_head_t poll_wait; -}; - -struct ib_ucm_context { - int id; - wait_queue_head_t wait; - atomic_t ref; - int events_reported; - - struct ib_ucm_file *file; - struct ib_cm_id *cm_id; - __u64 uid; - - struct list_head events; /* list of pending events. */ - struct list_head file_list; /* member in file ctx list */ -}; - -struct ib_ucm_event { - struct ib_ucm_context *ctx; - struct list_head file_list; /* member in file event list */ - struct list_head ctx_list; /* member in ctx event list */ - - struct ib_cm_id *cm_id; - struct ib_ucm_event_resp resp; - void *data; - void *info; - int data_len; - int info_len; -}; - -#endif /* UCM_H */ -- cgit v1.2.3 From 07d357d0cbf89d9980b1769d5444a3c70f000e00 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 17 Oct 2005 15:37:43 -0700 Subject: [IB] CM: bind IDs to a specific device Bind communication identifiers to a device to support device removal. Export per HCA CM devices to userspace. Signed-off-by: Sean Hefty --- drivers/infiniband/core/cm.c | 41 +++++--- drivers/infiniband/core/ucm.c | 218 +++++++++++++++++++++++++++++++----------- include/rdma/ib_cm.h | 10 +- include/rdma/ib_user_cm.h | 10 +- 4 files changed, 202 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 54db6d4831f1..6f747debca90 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -366,9 +366,15 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) cur_cm_id_priv = rb_entry(parent, struct cm_id_private, service_node); if ((cur_cm_id_priv->id.service_mask & service_id) == - (service_mask & cur_cm_id_priv->id.service_id)) - return cm_id_priv; - if (service_id < cur_cm_id_priv->id.service_id) + (service_mask & cur_cm_id_priv->id.service_id) && + (cm_id_priv->id.device == cur_cm_id_priv->id.device)) + return cur_cm_id_priv; + + if (cm_id_priv->id.device < cur_cm_id_priv->id.device) + link = &(*link)->rb_left; + else if (cm_id_priv->id.device > cur_cm_id_priv->id.device) + link = &(*link)->rb_right; + else if (service_id < cur_cm_id_priv->id.service_id) link = &(*link)->rb_left; else link = &(*link)->rb_right; @@ -378,7 +384,8 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) return NULL; } -static struct cm_id_private * cm_find_listen(__be64 service_id) +static struct cm_id_private * cm_find_listen(struct ib_device *device, + __be64 service_id) { struct rb_node *node = cm.listen_service_table.rb_node; struct cm_id_private *cm_id_priv; @@ -386,9 +393,15 @@ static struct cm_id_private * cm_find_listen(__be64 service_id) while (node) { cm_id_priv = rb_entry(node, struct cm_id_private, service_node); if ((cm_id_priv->id.service_mask & service_id) == - (cm_id_priv->id.service_mask & cm_id_priv->id.service_id)) + cm_id_priv->id.service_id && + (cm_id_priv->id.device == device)) return cm_id_priv; - if (service_id < cm_id_priv->id.service_id) + + if (device < cm_id_priv->id.device) + node = node->rb_left; + else if (device > cm_id_priv->id.device) + node = node->rb_right; + else if (service_id < cm_id_priv->id.service_id) node = node->rb_left; else node = node->rb_right; @@ -523,7 +536,8 @@ static void cm_reject_sidr_req(struct cm_id_private *cm_id_priv, ib_send_cm_sidr_rep(&cm_id_priv->id, ¶m); } -struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, +struct ib_cm_id *ib_create_cm_id(struct ib_device *device, + ib_cm_handler cm_handler, void *context) { struct cm_id_private *cm_id_priv; @@ -535,6 +549,7 @@ struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, memset(cm_id_priv, 0, sizeof *cm_id_priv); cm_id_priv->id.state = IB_CM_IDLE; + cm_id_priv->id.device = device; cm_id_priv->id.cm_handler = cm_handler; cm_id_priv->id.context = context; cm_id_priv->id.remote_cm_qpn = 1; @@ -1047,7 +1062,6 @@ static void cm_format_req_event(struct cm_work *work, req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad; param = &work->cm_event.param.req_rcvd; param->listen_id = listen_id; - param->device = cm_id_priv->av.port->mad_agent->device; param->port = cm_id_priv->av.port->port_num; param->primary_path = &work->path[0]; if (req_msg->alt_local_lid) @@ -1226,7 +1240,8 @@ static struct cm_id_private * cm_match_req(struct cm_work *work, } /* Find matching listen request. */ - listen_cm_id_priv = cm_find_listen(req_msg->service_id); + listen_cm_id_priv = cm_find_listen(cm_id_priv->id.device, + req_msg->service_id); if (!listen_cm_id_priv) { spin_unlock_irqrestore(&cm.lock, flags); cm_issue_rej(work->port, work->mad_recv_wc, @@ -1254,7 +1269,7 @@ static int cm_req_handler(struct cm_work *work) req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad; - cm_id = ib_create_cm_id(NULL, NULL); + cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL); if (IS_ERR(cm_id)) return PTR_ERR(cm_id); @@ -2629,7 +2644,6 @@ static void cm_format_sidr_req_event(struct cm_work *work, param = &work->cm_event.param.sidr_req_rcvd; param->pkey = __be16_to_cpu(sidr_req_msg->pkey); param->listen_id = listen_id; - param->device = work->port->mad_agent->device; param->port = work->port->port_num; work->cm_event.private_data = &sidr_req_msg->private_data; } @@ -2642,7 +2656,7 @@ static int cm_sidr_req_handler(struct cm_work *work) struct ib_wc *wc; unsigned long flags; - cm_id = ib_create_cm_id(NULL, NULL); + cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL); if (IS_ERR(cm_id)) return PTR_ERR(cm_id); cm_id_priv = container_of(cm_id, struct cm_id_private, id); @@ -2666,7 +2680,8 @@ static int cm_sidr_req_handler(struct cm_work *work) spin_unlock_irqrestore(&cm.lock, flags); goto out; /* Duplicate message. */ } - cur_cm_id_priv = cm_find_listen(sidr_req_msg->service_id); + cur_cm_id_priv = cm_find_listen(cm_id->device, + sidr_req_msg->service_id); if (!cur_cm_id_priv) { rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table); spin_unlock_irqrestore(&cm.lock, flags); diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index b7470f0fe83b..d208ea29e07a 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -52,12 +52,20 @@ MODULE_AUTHOR("Libor Michalek"); MODULE_DESCRIPTION("InfiniBand userspace Connection Manager access"); MODULE_LICENSE("Dual BSD/GPL"); +struct ib_ucm_device { + int devnum; + struct cdev dev; + struct class_device class_dev; + struct ib_device *ib_dev; +}; + struct ib_ucm_file { struct semaphore mutex; struct file *filp; + struct ib_ucm_device *device; - struct list_head ctxs; /* list of active connections */ - struct list_head events; /* list of pending events */ + struct list_head ctxs; + struct list_head events; wait_queue_head_t poll_wait; }; @@ -90,14 +98,24 @@ struct ib_ucm_event { enum { IB_UCM_MAJOR = 231, - IB_UCM_MINOR = 255 + IB_UCM_BASE_MINOR = 224, + IB_UCM_MAX_DEVICES = 32 }; -#define IB_UCM_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_MINOR) +#define IB_UCM_BASE_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_BASE_MINOR) -static struct semaphore ctx_id_mutex; -static struct idr ctx_id_table; +static void ib_ucm_add_one(struct ib_device *device); +static void ib_ucm_remove_one(struct ib_device *device); +static struct ib_client ucm_client = { + .name = "ucm", + .add = ib_ucm_add_one, + .remove = ib_ucm_remove_one +}; + +DECLARE_MUTEX(ctx_id_mutex); +DEFINE_IDR(ctx_id_table); +static DECLARE_BITMAP(dev_map, IB_UCM_MAX_DEVICES); static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) { @@ -184,10 +202,7 @@ error: kfree(ctx); return NULL; } -/* - * Event portion of the API, handle CM events - * and allow event polling. - */ + static void ib_ucm_event_path_get(struct ib_ucm_path_rec *upath, struct ib_sa_path_rec *kpath) { @@ -234,6 +249,7 @@ static void ib_ucm_event_req_get(struct ib_ucm_req_event_resp *ureq, ureq->retry_count = kreq->retry_count; ureq->rnr_retry_count = kreq->rnr_retry_count; ureq->srq = kreq->srq; + ureq->port = kreq->port; ib_ucm_event_path_get(&ureq->primary_path, kreq->primary_path); ib_ucm_event_path_get(&ureq->alternate_path, kreq->alternate_path); @@ -320,6 +336,8 @@ static int ib_ucm_event_process(struct ib_cm_event *evt, case IB_CM_SIDR_REQ_RECEIVED: uvt->resp.u.sidr_req_resp.pkey = evt->param.sidr_req_rcvd.pkey; + uvt->resp.u.sidr_req_resp.port = + evt->param.sidr_req_rcvd.port; uvt->data_len = IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE; break; case IB_CM_SIDR_REP_RECEIVED: @@ -412,9 +430,7 @@ static ssize_t ib_ucm_event(struct ib_ucm_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - /* - * wait - */ + down(&file->mutex); while (list_empty(&file->events)) { @@ -496,7 +512,6 @@ done: return result; } - static ssize_t ib_ucm_create_id(struct ib_ucm_file *file, const char __user *inbuf, int in_len, int out_len) @@ -519,29 +534,27 @@ static ssize_t ib_ucm_create_id(struct ib_ucm_file *file, return -ENOMEM; ctx->uid = cmd.uid; - ctx->cm_id = ib_create_cm_id(ib_ucm_event_handler, ctx); + ctx->cm_id = ib_create_cm_id(file->device->ib_dev, + ib_ucm_event_handler, ctx); if (IS_ERR(ctx->cm_id)) { result = PTR_ERR(ctx->cm_id); - goto err; + goto err1; } resp.id = ctx->id; if (copy_to_user((void __user *)(unsigned long)cmd.response, &resp, sizeof(resp))) { result = -EFAULT; - goto err; + goto err2; } - return 0; -err: +err2: + ib_destroy_cm_id(ctx->cm_id); +err1: down(&ctx_id_mutex); idr_remove(&ctx_id_table, ctx->id); up(&ctx_id_mutex); - - if (!IS_ERR(ctx->cm_id)) - ib_destroy_cm_id(ctx->cm_id); - kfree(ctx); return result; } @@ -1253,6 +1266,7 @@ static int ib_ucm_open(struct inode *inode, struct file *filp) filp->private_data = file; file->filp = filp; + file->device = container_of(inode->i_cdev, struct ib_ucm_device, dev); return 0; } @@ -1283,7 +1297,17 @@ static int ib_ucm_close(struct inode *inode, struct file *filp) return 0; } -static struct file_operations ib_ucm_fops = { +static void ib_ucm_release_class_dev(struct class_device *class_dev) +{ + struct ib_ucm_device *dev; + + dev = container_of(class_dev, struct ib_ucm_device, class_dev); + cdev_del(&dev->dev); + clear_bit(dev->devnum, dev_map); + kfree(dev); +} + +static struct file_operations ucm_fops = { .owner = THIS_MODULE, .open = ib_ucm_open, .release = ib_ucm_close, @@ -1291,55 +1315,141 @@ static struct file_operations ib_ucm_fops = { .poll = ib_ucm_poll, }; +static struct class ucm_class = { + .name = "infiniband_cm", + .release = ib_ucm_release_class_dev +}; + +static ssize_t show_dev(struct class_device *class_dev, char *buf) +{ + struct ib_ucm_device *dev; + + dev = container_of(class_dev, struct ib_ucm_device, class_dev); + return print_dev_t(buf, dev->dev.dev); +} +static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL); -static struct class *ib_ucm_class; -static struct cdev ib_ucm_cdev; +static ssize_t show_ibdev(struct class_device *class_dev, char *buf) +{ + struct ib_ucm_device *dev; + + dev = container_of(class_dev, struct ib_ucm_device, class_dev); + return sprintf(buf, "%s\n", dev->ib_dev->name); +} +static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); -static int __init ib_ucm_init(void) +static void ib_ucm_add_one(struct ib_device *device) { - int result; + struct ib_ucm_device *ucm_dev; - result = register_chrdev_region(IB_UCM_DEV, 1, "infiniband_cm"); - if (result) { - printk(KERN_ERR "ucm: Error <%d> registering dev\n", result); - goto err_chr; - } + if (!device->alloc_ucontext) + return; + + ucm_dev = kmalloc(sizeof *ucm_dev, GFP_KERNEL); + if (!ucm_dev) + return; - cdev_init(&ib_ucm_cdev, &ib_ucm_fops); + memset(ucm_dev, 0, sizeof *ucm_dev); + ucm_dev->ib_dev = device; - result = cdev_add(&ib_ucm_cdev, IB_UCM_DEV, 1); - if (result) { - printk(KERN_ERR "ucm: Error <%d> adding cdev\n", result); + ucm_dev->devnum = find_first_zero_bit(dev_map, IB_UCM_MAX_DEVICES); + if (ucm_dev->devnum >= IB_UCM_MAX_DEVICES) + goto err; + + set_bit(ucm_dev->devnum, dev_map); + + cdev_init(&ucm_dev->dev, &ucm_fops); + ucm_dev->dev.owner = THIS_MODULE; + kobject_set_name(&ucm_dev->dev.kobj, "ucm%d", ucm_dev->devnum); + if (cdev_add(&ucm_dev->dev, IB_UCM_BASE_DEV + ucm_dev->devnum, 1)) + goto err; + + ucm_dev->class_dev.class = &ucm_class; + ucm_dev->class_dev.dev = device->dma_device; + snprintf(ucm_dev->class_dev.class_id, BUS_ID_SIZE, "ucm%d", + ucm_dev->devnum); + if (class_device_register(&ucm_dev->class_dev)) goto err_cdev; - } - ib_ucm_class = class_create(THIS_MODULE, "infiniband_cm"); - if (IS_ERR(ib_ucm_class)) { - result = PTR_ERR(ib_ucm_class); - printk(KERN_ERR "Error <%d> creating class\n", result); + if (class_device_create_file(&ucm_dev->class_dev, + &class_device_attr_dev)) + goto err_class; + if (class_device_create_file(&ucm_dev->class_dev, + &class_device_attr_ibdev)) goto err_class; + + ib_set_client_data(device, &ucm_client, ucm_dev); + return; + +err_class: + class_device_unregister(&ucm_dev->class_dev); +err_cdev: + cdev_del(&ucm_dev->dev); + clear_bit(ucm_dev->devnum, dev_map); +err: + kfree(ucm_dev); + return; +} + +static void ib_ucm_remove_one(struct ib_device *device) +{ + struct ib_ucm_device *ucm_dev = ib_get_client_data(device, &ucm_client); + + if (!ucm_dev) + return; + + class_device_unregister(&ucm_dev->class_dev); +} + +static ssize_t show_abi_version(struct class *class, char *buf) +{ + return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION); +} +static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL); + +static int __init ib_ucm_init(void) +{ + int ret; + + ret = register_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES, + "infiniband_cm"); + if (ret) { + printk(KERN_ERR "ucm: couldn't register device number\n"); + goto err; } - class_device_create(ib_ucm_class, IB_UCM_DEV, NULL, "ucm"); + ret = class_register(&ucm_class); + if (ret) { + printk(KERN_ERR "ucm: couldn't create class infiniband_cm\n"); + goto err_chrdev; + } - idr_init(&ctx_id_table); - init_MUTEX(&ctx_id_mutex); + ret = class_create_file(&ucm_class, &class_attr_abi_version); + if (ret) { + printk(KERN_ERR "ucm: couldn't create abi_version attribute\n"); + goto err_class; + } + ret = ib_register_client(&ucm_client); + if (ret) { + printk(KERN_ERR "ucm: couldn't register client\n"); + goto err_class; + } return 0; + err_class: - cdev_del(&ib_ucm_cdev); -err_cdev: - unregister_chrdev_region(IB_UCM_DEV, 1); -err_chr: - return result; + class_unregister(&ucm_class); +err_chrdev: + unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES); +err: + return ret; } static void __exit ib_ucm_cleanup(void) { - class_device_destroy(ib_ucm_class, IB_UCM_DEV); - class_destroy(ib_ucm_class); - cdev_del(&ib_ucm_cdev); - unregister_chrdev_region(IB_UCM_DEV, 1); + ib_unregister_client(&ucm_client); + class_unregister(&ucm_class); + unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES); } module_init(ib_ucm_init); diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index 5308683c8c41..0a9fcd59eb43 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2004 Intel Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. * Copyright (c) 2004 Topspin Corporation. All rights reserved. * Copyright (c) 2004 Voltaire Corporation. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. @@ -109,7 +109,6 @@ struct ib_cm_id; struct ib_cm_req_event_param { struct ib_cm_id *listen_id; - struct ib_device *device; u8 port; struct ib_sa_path_rec *primary_path; @@ -220,7 +219,6 @@ struct ib_cm_apr_event_param { struct ib_cm_sidr_req_event_param { struct ib_cm_id *listen_id; - struct ib_device *device; u8 port; u16 pkey; }; @@ -284,6 +282,7 @@ typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id, struct ib_cm_id { ib_cm_handler cm_handler; void *context; + struct ib_device *device; __be64 service_id; __be64 service_mask; enum ib_cm_state state; /* internal CM/debug use */ @@ -295,6 +294,8 @@ struct ib_cm_id { /** * ib_create_cm_id - Allocate a communication identifier. + * @device: Device associated with the cm_id. All related communication will + * be associated with the specified device. * @cm_handler: Callback invoked to notify the user of CM events. * @context: User specified context associated with the communication * identifier. @@ -302,7 +303,8 @@ struct ib_cm_id { * Communication identifiers are used to track connection states, service * ID resolution requests, and listen requests. */ -struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, +struct ib_cm_id *ib_create_cm_id(struct ib_device *device, + ib_cm_handler cm_handler, void *context); /** diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h index e4d1654276ad..3037588b8464 100644 --- a/include/rdma/ib_user_cm.h +++ b/include/rdma/ib_user_cm.h @@ -38,7 +38,7 @@ #include -#define IB_USER_CM_ABI_VERSION 2 +#define IB_USER_CM_ABI_VERSION 3 enum { IB_USER_CM_CMD_CREATE_ID, @@ -299,8 +299,6 @@ struct ib_ucm_event_get { }; struct ib_ucm_req_event_resp { - /* device */ - /* port */ struct ib_ucm_path_rec primary_path; struct ib_ucm_path_rec alternate_path; __be64 remote_ca_guid; @@ -316,6 +314,7 @@ struct ib_ucm_req_event_resp { __u8 retry_count; __u8 rnr_retry_count; __u8 srq; + __u8 port; }; struct ib_ucm_rep_event_resp { @@ -353,10 +352,9 @@ struct ib_ucm_apr_event_resp { }; struct ib_ucm_sidr_req_event_resp { - /* device */ - /* port */ __u16 pkey; - __u8 reserved[2]; + __u8 port; + __u8 reserved; }; struct ib_ucm_sidr_rep_event_resp { -- cgit v1.2.3 From 762a03e21ed08daa5170d9cd98e83539861e7692 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 17 Oct 2005 15:38:50 -0700 Subject: [IB] ucm: quiet sparse warnings Make ctx_id_mutex and ctx_id_table static to quiet sparse warnings. Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d208ea29e07a..02ca642089bd 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -113,8 +113,8 @@ static struct ib_client ucm_client = { .remove = ib_ucm_remove_one }; -DECLARE_MUTEX(ctx_id_mutex); -DEFINE_IDR(ctx_id_table); +static DECLARE_MUTEX(ctx_id_mutex); +static DEFINE_IDR(ctx_id_table); static DECLARE_BITMAP(dev_map, IB_UCM_MAX_DEVICES); static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) -- cgit v1.2.3 From 4b2d319b53810ab00ef3d8fdfc1c1ab0647ab0a7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 12:20:06 -0700 Subject: [IPoIB] Improve ipoib_timeout() output Use jiffies_to_msecs() so we print a human-readable time so we don't have to worry about what HZ is configured to, and print out a few values to make post-mortem analysis easier. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 6c5bf07489f4..ee303859b044 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -637,8 +637,11 @@ static void ipoib_timeout(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - ipoib_warn(priv, "transmit timeout: latency %ld\n", - jiffies - dev->trans_start); + ipoib_warn(priv, "transmit timeout: latency %d msecs\n", + jiffies_to_msecs(jiffies - dev->trans_start)); + ipoib_warn(priv, "queue stopped %d, tx_head %u, tx_tail %u\n", + netif_queue_stopped(dev), + priv->tx_head, priv->tx_tail); /* XXX reset QP, etc. */ } -- cgit v1.2.3 From c6f5cb7be0ab478e0618e3c2c6ada27f56d1e7fb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 13:22:16 -0700 Subject: [IB] mthca: Use enum in mthca_alloc_db() prototype Make the type parameter of mthca_alloc_db() be an enum mthca_db_type instead of an int. This doesn't have any practical effect but documents the functions a little better. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_memfree.c | 3 ++- drivers/infiniband/hw/mthca/mthca_memfree.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 7bd7a4bec7b4..d63b1a147100 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -487,7 +487,8 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar, } } -int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db) +int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type, + u32 qn, __be32 **db) { int group; int start, end, dir; diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index bafa51544aa3..29c01a4b2656 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -173,7 +173,8 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar, int mthca_init_db_tab(struct mthca_dev *dev); void mthca_cleanup_db_tab(struct mthca_dev *dev); -int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db); +int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type, + u32 qn, __be32 **db); void mthca_free_db(struct mthca_dev *dev, int type, int db_index); #endif /* MTHCA_MEMFREE_H */ -- cgit v1.2.3 From ad4ebed00fbf570411edbf6eb6c391e16b71df25 Mon Sep 17 00:00:00 2001 From: "ravinandan.arakali@neterion.com" Date: Mon, 17 Oct 2005 18:26:20 -0700 Subject: [PATCH] S2io: Offline diagnostics fixes This patch fixes the following bugs with offline diagnostics code(run with "ethtool -t"). 1. After running offline diagnostics, adapter would report corrupted packets on receive. This was because of adapter not being brought out of "RLDRAM test mode". 2. Current EEPROM test works only for Xframe I. Since Xframe II uses different interface(SPI), support for this interface has been added. Also, since SPI supports write access to all areas of EEPROM, negative testing is done only for Xframe I. 3. Return values from subfunctions of offline diagnostics have been corrected. 4. In register test, expected value from rx_queue_cfg register is made to depend on adapter type. 5. After the test, need to restore values at EEPROM offsets 0x4F0 and 0x7F0. These locations were modified as part of test. 6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl register. Also, couple of unnecessary writes to mc_rldram_test_ctrl have been removed. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 11 +++ drivers/net/s2io.c | 231 +++++++++++++++++++++++++++++++----------------- 2 files changed, 162 insertions(+), 80 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 7cefe5507b9e..00179bc3437f 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -814,6 +814,17 @@ typedef struct _XENA_dev_config { u64 rxgxs_ber_0; /* CHANGED */ u64 rxgxs_ber_1; /* CHANGED */ + u64 spi_control; +#define SPI_CONTROL_KEY(key) vBIT(key,0,4) +#define SPI_CONTROL_BYTECNT(cnt) vBIT(cnt,29,3) +#define SPI_CONTROL_CMD(cmd) vBIT(cmd,32,8) +#define SPI_CONTROL_ADDR(addr) vBIT(addr,40,24) +#define SPI_CONTROL_SEL1 BIT(4) +#define SPI_CONTROL_REQ BIT(7) +#define SPI_CONTROL_NACK BIT(5) +#define SPI_CONTROL_DONE BIT(6) + u64 spi_data; +#define SPI_DATA_WRITE(data,len) vBIT(data,0,len) } XENA_dev_config_t; #define XENA_REG_SPACE sizeof(XENA_dev_config_t) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index fcf61107046e..30fbaf04773f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -4378,29 +4378,53 @@ static int s2io_ethtool_setpause_data(struct net_device *dev, */ #define S2IO_DEV_ID 5 -static int read_eeprom(nic_t * sp, int off, u32 * data) +static int read_eeprom(nic_t * sp, int off, u64 * data) { int ret = -1; u32 exit_cnt = 0; u64 val64; XENA_dev_config_t __iomem *bar0 = sp->bar0; - val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | - I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ | - I2C_CONTROL_CNTL_START; - SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); + if (sp->device_type == XFRAME_I_DEVICE) { + val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | + I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ | + I2C_CONTROL_CNTL_START; + SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); - while (exit_cnt < 5) { - val64 = readq(&bar0->i2c_control); - if (I2C_CONTROL_CNTL_END(val64)) { - *data = I2C_CONTROL_GET_DATA(val64); - ret = 0; - break; + while (exit_cnt < 5) { + val64 = readq(&bar0->i2c_control); + if (I2C_CONTROL_CNTL_END(val64)) { + *data = I2C_CONTROL_GET_DATA(val64); + ret = 0; + break; + } + msleep(50); + exit_cnt++; } - msleep(50); - exit_cnt++; } + if (sp->device_type == XFRAME_II_DEVICE) { + val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | + SPI_CONTROL_BYTECNT(0x3) | + SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off); + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + val64 |= SPI_CONTROL_REQ; + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + while (exit_cnt < 5) { + val64 = readq(&bar0->spi_control); + if (val64 & SPI_CONTROL_NACK) { + ret = 1; + break; + } else if (val64 & SPI_CONTROL_DONE) { + *data = readq(&bar0->spi_data); + *data &= 0xffffff; + ret = 0; + break; + } + msleep(50); + exit_cnt++; + } + } return ret; } @@ -4419,28 +4443,53 @@ static int read_eeprom(nic_t * sp, int off, u32 * data) * 0 on success, -1 on failure. */ -static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) +static int write_eeprom(nic_t * sp, int off, u64 data, int cnt) { int exit_cnt = 0, ret = -1; u64 val64; XENA_dev_config_t __iomem *bar0 = sp->bar0; - val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | - I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) | - I2C_CONTROL_CNTL_START; - SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); + if (sp->device_type == XFRAME_I_DEVICE) { + val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | + I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) | + I2C_CONTROL_CNTL_START; + SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); + + while (exit_cnt < 5) { + val64 = readq(&bar0->i2c_control); + if (I2C_CONTROL_CNTL_END(val64)) { + if (!(val64 & I2C_CONTROL_NACK)) + ret = 0; + break; + } + msleep(50); + exit_cnt++; + } + } - while (exit_cnt < 5) { - val64 = readq(&bar0->i2c_control); - if (I2C_CONTROL_CNTL_END(val64)) { - if (!(val64 & I2C_CONTROL_NACK)) + if (sp->device_type == XFRAME_II_DEVICE) { + int write_cnt = (cnt == 8) ? 0 : cnt; + writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data); + + val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | + SPI_CONTROL_BYTECNT(write_cnt) | + SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off); + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + val64 |= SPI_CONTROL_REQ; + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + while (exit_cnt < 5) { + val64 = readq(&bar0->spi_control); + if (val64 & SPI_CONTROL_NACK) { + ret = 1; + break; + } else if (val64 & SPI_CONTROL_DONE) { ret = 0; - break; + break; + } + msleep(50); + exit_cnt++; } - msleep(50); - exit_cnt++; } - return ret; } @@ -4460,7 +4509,8 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) static int s2io_ethtool_geeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 * data_buf) { - u32 data, i, valid; + u32 i, valid; + u64 data; nic_t *sp = dev->priv; eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16); @@ -4498,7 +4548,7 @@ static int s2io_ethtool_seeprom(struct net_device *dev, u8 * data_buf) { int len = eeprom->len, cnt = 0; - u32 valid = 0, data; + u64 valid = 0, data; nic_t *sp = dev->priv; if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) { @@ -4546,7 +4596,7 @@ static int s2io_ethtool_seeprom(struct net_device *dev, static int s2io_register_test(nic_t * sp, uint64_t * data) { XENA_dev_config_t __iomem *bar0 = sp->bar0; - u64 val64 = 0; + u64 val64 = 0, exp_val; int fail = 0; val64 = readq(&bar0->pif_rd_swapper_fb); @@ -4562,7 +4612,11 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) } val64 = readq(&bar0->rx_queue_cfg); - if (val64 != 0x0808080808080808ULL) { + if (sp->device_type == XFRAME_II_DEVICE) + exp_val = 0x0404040404040404ULL; + else + exp_val = 0x0808080808080808ULL; + if (val64 != exp_val) { fail = 1; DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n"); } @@ -4590,7 +4644,7 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) } *data = fail; - return 0; + return fail; } /** @@ -4609,58 +4663,83 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) static int s2io_eeprom_test(nic_t * sp, uint64_t * data) { int fail = 0; - u32 ret_data; + u64 ret_data, org_4F0, org_7F0; + u8 saved_4F0 = 0, saved_7F0 = 0; + struct net_device *dev = sp->dev; /* Test Write Error at offset 0 */ - if (!write_eeprom(sp, 0, 0, 3)) - fail = 1; + /* Note that SPI interface allows write access to all areas + * of EEPROM. Hence doing all negative testing only for Xframe I. + */ + if (sp->device_type == XFRAME_I_DEVICE) + if (!write_eeprom(sp, 0, 0, 3)) + fail = 1; + + /* Save current values at offsets 0x4F0 and 0x7F0 */ + if (!read_eeprom(sp, 0x4F0, &org_4F0)) + saved_4F0 = 1; + if (!read_eeprom(sp, 0x7F0, &org_7F0)) + saved_7F0 = 1; /* Test Write at offset 4f0 */ - if (write_eeprom(sp, 0x4F0, 0x01234567, 3)) + if (write_eeprom(sp, 0x4F0, 0x012345, 3)) fail = 1; if (read_eeprom(sp, 0x4F0, &ret_data)) fail = 1; - if (ret_data != 0x01234567) + if (ret_data != 0x012345) { + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); fail = 1; + } /* Reset the EEPROM data go FFFF */ - write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3); + write_eeprom(sp, 0x4F0, 0xFFFFFF, 3); /* Test Write Request Error at offset 0x7c */ - if (!write_eeprom(sp, 0x07C, 0, 3)) - fail = 1; + if (sp->device_type == XFRAME_I_DEVICE) + if (!write_eeprom(sp, 0x07C, 0, 3)) + fail = 1; - /* Test Write Request at offset 0x7fc */ - if (write_eeprom(sp, 0x7FC, 0x01234567, 3)) + /* Test Write Request at offset 0x7f0 */ + if (write_eeprom(sp, 0x7F0, 0x012345, 3)) fail = 1; - if (read_eeprom(sp, 0x7FC, &ret_data)) + if (read_eeprom(sp, 0x7F0, &ret_data)) fail = 1; - if (ret_data != 0x01234567) + if (ret_data != 0x012345) { + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); fail = 1; + } /* Reset the EEPROM data go FFFF */ - write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3); + write_eeprom(sp, 0x7F0, 0xFFFFFF, 3); - /* Test Write Error at offset 0x80 */ - if (!write_eeprom(sp, 0x080, 0, 3)) - fail = 1; + if (sp->device_type == XFRAME_I_DEVICE) { + /* Test Write Error at offset 0x80 */ + if (!write_eeprom(sp, 0x080, 0, 3)) + fail = 1; - /* Test Write Error at offset 0xfc */ - if (!write_eeprom(sp, 0x0FC, 0, 3)) - fail = 1; + /* Test Write Error at offset 0xfc */ + if (!write_eeprom(sp, 0x0FC, 0, 3)) + fail = 1; - /* Test Write Error at offset 0x100 */ - if (!write_eeprom(sp, 0x100, 0, 3)) - fail = 1; + /* Test Write Error at offset 0x100 */ + if (!write_eeprom(sp, 0x100, 0, 3)) + fail = 1; - /* Test Write Error at offset 4ec */ - if (!write_eeprom(sp, 0x4EC, 0, 3)) - fail = 1; + /* Test Write Error at offset 4ec */ + if (!write_eeprom(sp, 0x4EC, 0, 3)) + fail = 1; + } + + /* Restore values at offsets 0x4F0 and 0x7F0 */ + if (saved_4F0) + write_eeprom(sp, 0x4F0, org_4F0, 3); + if (saved_7F0) + write_eeprom(sp, 0x7F0, org_7F0, 3); *data = fail; - return 0; + return fail; } /** @@ -4742,7 +4821,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; - int cnt, iteration = 0, test_pass = 0; + int cnt, iteration = 0, test_fail = 0; val64 = readq(&bar0->adapter_control); val64 &= ~ADAPTER_ECC_EN; @@ -4750,7 +4829,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) val64 = readq(&bar0->mc_rldram_test_ctrl); val64 |= MC_RLDRAM_TEST_MODE; - writeq(val64, &bar0->mc_rldram_test_ctrl); + SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); val64 = readq(&bar0->mc_rldram_mrs); val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE; @@ -4778,17 +4857,12 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) } writeq(val64, &bar0->mc_rldram_test_d2); - val64 = (u64) (0x0000003fffff0000ULL); + val64 = (u64) (0x0000003ffffe0100ULL); writeq(val64, &bar0->mc_rldram_test_add); - - val64 = MC_RLDRAM_TEST_MODE; - writeq(val64, &bar0->mc_rldram_test_ctrl); - - val64 |= - MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE | - MC_RLDRAM_TEST_GO; - writeq(val64, &bar0->mc_rldram_test_ctrl); + val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE | + MC_RLDRAM_TEST_GO; + SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); for (cnt = 0; cnt < 5; cnt++) { val64 = readq(&bar0->mc_rldram_test_ctrl); @@ -4800,11 +4874,8 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) if (cnt == 5) break; - val64 = MC_RLDRAM_TEST_MODE; - writeq(val64, &bar0->mc_rldram_test_ctrl); - - val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO; - writeq(val64, &bar0->mc_rldram_test_ctrl); + val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO; + SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); for (cnt = 0; cnt < 5; cnt++) { val64 = readq(&bar0->mc_rldram_test_ctrl); @@ -4817,18 +4888,18 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) break; val64 = readq(&bar0->mc_rldram_test_ctrl); - if (val64 & MC_RLDRAM_TEST_PASS) - test_pass = 1; + if (!(val64 & MC_RLDRAM_TEST_PASS)) + test_fail = 1; iteration++; } - if (!test_pass) - *data = 1; - else - *data = 0; + *data = test_fail; - return 0; + /* Bring the adapter out of test mode */ + SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF); + + return test_fail; } /** -- cgit v1.2.3 From bc0a7438605c5e0cafdb32a3caf46254e146b116 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 17 Oct 2005 12:42:32 +0100 Subject: [PATCH] rcu in bpqether driver. From Suzanne Wood : Clarify RCU implementation in bpqether.c. Because bpq_new_device() calls list_add_rcu() and bpq_free_device() calls list_del_rcu(), substitute list_for_each_entry_rcu() for list_for_each_entry() in bpq_get_ax25_dev() and in bpq_seq_start(). Add rcu dereference protection in bpq_seq_next(). The rcu_read_lock()/unlock() in bpq_device_event() are removed because netdev event handlers are called with RTNL locking in place. FYI: bpq_free_device() calls list_del_rcu() which, per list.h, requires synchronize_rcu() which can block or call_rcu() or call_rcu_bh() which cannot block. Herbert Xu notes that synchronization is done here by unregister_netdevice(). This calls synchronize_net() which in turn uses synchronize_rcu(). Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/bpqether.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 1756f0ed54cc..cb43a9d28774 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -144,7 +144,7 @@ static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev) { struct bpqdev *bpq; - list_for_each_entry(bpq, &bpq_devices, bpq_list) { + list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) { if (bpq->ethdev == dev) return bpq->axdev; } @@ -399,7 +399,7 @@ static void *bpq_seq_start(struct seq_file *seq, loff_t *pos) if (*pos == 0) return SEQ_START_TOKEN; - list_for_each_entry(bpqdev, &bpq_devices, bpq_list) { + list_for_each_entry_rcu(bpqdev, &bpq_devices, bpq_list) { if (i == *pos) return bpqdev; } @@ -418,7 +418,7 @@ static void *bpq_seq_next(struct seq_file *seq, void *v, loff_t *pos) p = ((struct bpqdev *)v)->bpq_list.next; return (p == &bpq_devices) ? NULL - : list_entry(p, struct bpqdev, bpq_list); + : rcu_dereference(list_entry(p, struct bpqdev, bpq_list)); } static void bpq_seq_stop(struct seq_file *seq, void *v) @@ -561,8 +561,6 @@ static int bpq_device_event(struct notifier_block *this,unsigned long event, voi if (!dev_is_ethdev(dev)) return NOTIFY_DONE; - rcu_read_lock(); - switch (event) { case NETDEV_UP: /* new ethernet device -> new BPQ interface */ if (bpq_get_ax25_dev(dev) == NULL) @@ -581,7 +579,6 @@ static int bpq_device_event(struct notifier_block *this,unsigned long event, voi default: break; } - rcu_read_unlock(); return NOTIFY_DONE; } -- cgit v1.2.3 From 5793f4be23f0171b4999ca68a39a9157b44139f3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 14 Oct 2005 14:28:09 +0100 Subject: [PATCH] SMACK support for mkiss SMACK (Stuttgart Modified Amateurradio CRC KISS) is a KISS variant that uses CRC16 checksums to secure data transfers between the modem and host. It's also used to communicate over a pty to applications such as Wampes. Patches for Linux 2.4 by Thomas Osterried DL9SAU, upgraded to the latest mkiss 2.6 mkiss driver by me. Signed-off-by: Thomas Osterried DL9SAU Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/Kconfig | 1 + drivers/net/hamradio/mkiss.c | 178 +++++++++++++++++++++++++++++++++++-------- 2 files changed, 148 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index de087cd609d9..896aa02000d7 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -1,6 +1,7 @@ config MKISS tristate "Serial port KISS driver" depends on AX25 + select CRC16 ---help--- KISS is a protocol used for the exchange of data between a computer and a Terminal Node Controller (a small embedded system commonly diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 331a75c8aee2..7961f5b41c4b 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -14,13 +14,14 @@ * * Copyright (C) Hans Alblas PE1AYX * Copyright (C) 2004, 05 Ralf Baechle DL5RB + * Copyright (C) 2004, 05 Thomas Osterried DL9SAU */ - #include #include #include #include #include +#include #include #include #include @@ -39,11 +40,6 @@ #include -#ifdef CONFIG_INET -#include -#include -#endif - #define AX_MTU 236 /* SLIP/KISS protocol characters. */ @@ -80,9 +76,13 @@ struct mkiss { int mode; int crcmode; /* MW: for FlexNet, SMACK etc. */ -#define CRC_MODE_NONE 0 -#define CRC_MODE_FLEX 1 -#define CRC_MODE_SMACK 2 + int crcauto; /* CRC auto mode */ + +#define CRC_MODE_NONE 0 +#define CRC_MODE_FLEX 1 +#define CRC_MODE_SMACK 2 +#define CRC_MODE_FLEX_TEST 3 +#define CRC_MODE_SMACK_TEST 4 atomic_t refcnt; struct semaphore dead_sem; @@ -151,6 +151,21 @@ static int check_crc_flex(unsigned char *cp, int size) return 0; } +static int check_crc_16(unsigned char *cp, int size) +{ + unsigned short crc = 0x0000; + + if (size < 3) + return -1; + + crc = crc16(0, cp, size); + + if (crc != 0x0000) + return -1; + + return 0; +} + /* * Standard encapsulation */ @@ -237,19 +252,42 @@ static void ax_bump(struct mkiss *ax) spin_lock_bh(&ax->buflock); if (ax->rbuff[0] > 0x0f) { - if (ax->rbuff[0] & 0x20) { - ax->crcmode = CRC_MODE_FLEX; + if (ax->rbuff[0] & 0x80) { + if (check_crc_16(ax->rbuff, ax->rcount) < 0) { + ax->stats.rx_errors++; + spin_unlock_bh(&ax->buflock); + + return; + } + if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) { + printk(KERN_INFO + "mkiss: %s: Switchting to crc-smack\n", + ax->dev->name); + ax->crcmode = CRC_MODE_SMACK; + } + ax->rcount -= 2; + *ax->rbuff &= ~0x80; + } else if (ax->rbuff[0] & 0x20) { if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { - ax->stats.rx_errors++; + ax->stats.rx_errors++; + spin_unlock_bh(&ax->buflock); return; } + if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { + printk(KERN_INFO + "mkiss: %s: Switchting to crc-flexnet\n", + ax->dev->name); + ax->crcmode = CRC_MODE_FLEX; + } ax->rcount -= 2; - /* dl9sau bugfix: the trailling two bytes flexnet crc - * will not be passed to the kernel. thus we have - * to correct the kissparm signature, because it - * indicates a crc but there's none + + /* + * dl9sau bugfix: the trailling two bytes flexnet crc + * will not be passed to the kernel. thus we have to + * correct the kissparm signature, because it indicates + * a crc but there's none */ - *ax->rbuff &= ~0x20; + *ax->rbuff &= ~0x20; } } spin_unlock_bh(&ax->buflock); @@ -417,20 +455,69 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) p = icp; spin_lock_bh(&ax->buflock); - switch (ax->crcmode) { - unsigned short crc; + if ((*p & 0x0f) != 0) { + /* Configuration Command (kissparms(1). + * Protocol spec says: never append CRC. + * This fixes a very old bug in the linux + * kiss driver. -- dl9sau */ + switch (*p & 0xff) { + case 0x85: + /* command from userspace especially for us, + * not for delivery to the tnc */ + if (len > 1) { + int cmd = (p[1] & 0xff); + switch(cmd) { + case 3: + ax->crcmode = CRC_MODE_SMACK; + break; + case 2: + ax->crcmode = CRC_MODE_FLEX; + break; + case 1: + ax->crcmode = CRC_MODE_NONE; + break; + case 0: + default: + ax->crcmode = CRC_MODE_SMACK_TEST; + cmd = 0; + } + ax->crcauto = (cmd ? 0 : 1); + printk(KERN_INFO "mkiss: %s: crc mode %s %d\n", ax->dev->name, (len) ? "set to" : "is", cmd); + } + spin_unlock_bh(&ax->buflock); + netif_start_queue(dev); - case CRC_MODE_FLEX: - *p |= 0x20; - crc = calc_crc_flex(p, len); - count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); - break; + return; + default: + count = kiss_esc(p, (unsigned char *)ax->xbuff, len); + } + } else { + unsigned short crc; + switch (ax->crcmode) { + case CRC_MODE_SMACK_TEST: + ax->crcmode = CRC_MODE_FLEX_TEST; + printk(KERN_INFO "mkiss: %s: Trying crc-smack\n", ax->dev->name); + // fall through + case CRC_MODE_SMACK: + *p |= 0x80; + crc = swab16(crc16(0, p, len)); + count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); + break; + case CRC_MODE_FLEX_TEST: + ax->crcmode = CRC_MODE_NONE; + printk(KERN_INFO "mkiss: %s: Trying crc-flexnet\n", ax->dev->name); + // fall through + case CRC_MODE_FLEX: + *p |= 0x20; + crc = calc_crc_flex(p, len); + count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); + break; + + default: + count = kiss_esc(p, (unsigned char *)ax->xbuff, len); + } + } - default: - count = kiss_esc(p, (unsigned char *)ax->xbuff, len); - break; - } - set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); actual = ax->tty->driver->write(ax->tty, ax->xbuff, count); ax->stats.tx_packets++; @@ -439,8 +526,6 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) ax->dev->trans_start = jiffies; ax->xleft = count - actual; ax->xhead = ax->xbuff + actual; - - spin_unlock_bh(&ax->buflock); } /* Encapsulate an AX.25 packet and kick it into a TTY queue. */ @@ -643,6 +728,8 @@ static void mkiss_put(struct mkiss *ax) up(&ax->dead_sem); } +static int crc_force = 0; /* Can be overridden with insmod */ + static int mkiss_open(struct tty_struct *tty) { struct net_device *dev; @@ -682,6 +769,33 @@ static int mkiss_open(struct tty_struct *tty) if (register_netdev(dev)) goto out_free_buffers; + /* after register_netdev() - because else printk smashes the kernel */ + switch (crc_force) { + case 3: + ax->crcmode = CRC_MODE_SMACK; + printk(KERN_INFO "mkiss: %s: crc mode smack forced.\n", + ax->dev->name); + break; + case 2: + ax->crcmode = CRC_MODE_FLEX; + printk(KERN_INFO "mkiss: %s: crc mode flexnet forced.\n", + ax->dev->name); + break; + case 1: + ax->crcmode = CRC_MODE_NONE; + printk(KERN_INFO "mkiss: %s: crc mode disabled.\n", + ax->dev->name); + break; + case 0: + /* fall through */ + default: + crc_force = 0; + printk(KERN_INFO "mkiss: %s: crc mode is auto.\n", + ax->dev->name); + ax->crcmode = CRC_MODE_SMACK_TEST; + } + ax->crcauto = (crc_force ? 0 : 1); + netif_start_queue(dev); /* Done. We have linked the TTY line to a channel. */ @@ -903,6 +1017,8 @@ static void __exit mkiss_exit_driver(void) MODULE_AUTHOR("Ralf Baechle DL5RB "); MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs"); +MODULE_PARM(crc_force, "i"); +MODULE_PARM_DESC(crc_force, "crc [0 = auto | 1 = none | 2 = flexnet | 3 = smack]"); MODULE_LICENSE("GPL"); MODULE_ALIAS_LDISC(N_AX25); -- cgit v1.2.3 From 74cfe03f80adc320bde4dd37616354aefe2271aa Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 12 Oct 2005 23:11:01 +0100 Subject: [PATCH] Initialize the .owner field the tty_ldisc structure. If .owner isn't set the module can be unloaded even while still active. Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 7961f5b41c4b..85d6dc005be0 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -977,6 +977,7 @@ out: } static struct tty_ldisc ax_ldisc = { + .owner = THIS_MODULE, .magic = TTY_LDISC_MAGIC, .name = "mkiss", .open = mkiss_open, -- cgit v1.2.3 From d476306f1cc9156ce4b42586aacce70a356ef656 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 14:07:07 -0700 Subject: [IB] mthca: Add struct pci_driver.owner field Set mthca_driver.owner to THIS_MODULE. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 7c35abec81ea..883d1e5a79bc 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -1196,6 +1196,7 @@ MODULE_DEVICE_TABLE(pci, mthca_pci_table); static struct pci_driver mthca_driver = { .name = DRV_NAME, + .owner = THIS_MODULE, .id_table = mthca_pci_table, .probe = mthca_init_one, .remove = __devexit_p(mthca_remove_one) -- cgit v1.2.3 From ba8e9310244180bbc820e865d2e4378809b4a443 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 14:14:56 -0700 Subject: [IB] Fail sysfs queries after device is unregistered We keep IB device structures around until the last sysfs reference is gone, but we shouldn't ask the low-level driver to do anything after the LLD unregisters the device. To handle this, check the reg_state field and just fail sysfs show() requests if the device has already been unregistered. Signed-off-by: Roland Dreier --- drivers/infiniband/core/sysfs.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 211ba3223f65..7ce7a6c782fa 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -65,6 +65,11 @@ struct port_table_attribute { int index; }; +static inline int ibdev_is_alive(const struct ib_device *dev) +{ + return dev->reg_state == IB_DEV_REGISTERED; +} + static ssize_t port_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) { @@ -74,6 +79,8 @@ static ssize_t port_attr_show(struct kobject *kobj, if (!port_attr->show) return -EIO; + if (!ibdev_is_alive(p->ibdev)) + return -ENODEV; return port_attr->show(p, port_attr, buf); } @@ -581,6 +588,9 @@ static ssize_t show_node_type(struct class_device *cdev, char *buf) { struct ib_device *dev = container_of(cdev, struct ib_device, class_dev); + if (!ibdev_is_alive(dev)) + return -ENODEV; + switch (dev->node_type) { case IB_NODE_CA: return sprintf(buf, "%d: CA\n", dev->node_type); case IB_NODE_SWITCH: return sprintf(buf, "%d: switch\n", dev->node_type); @@ -595,6 +605,9 @@ static ssize_t show_sys_image_guid(struct class_device *cdev, char *buf) struct ib_device_attr attr; ssize_t ret; + if (!ibdev_is_alive(dev)) + return -ENODEV; + ret = ib_query_device(dev, &attr); if (ret) return ret; @@ -612,6 +625,9 @@ static ssize_t show_node_guid(struct class_device *cdev, char *buf) struct ib_device_attr attr; ssize_t ret; + if (!ibdev_is_alive(dev)) + return -ENODEV; + ret = ib_query_device(dev, &attr); if (ret) return ret; -- cgit v1.2.3 From 07506697d1c615924298406f2357810709c09bcd Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:04:18 +0800 Subject: [PATCH] libata CHS: move the initialization of taskfile LBA flags (revise #6) move the initialization of taskfile LBA flags "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags" to the SCSI translation functions Signed-off-by: Albert Lee ============= Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 7 ------- drivers/scsi/libata-scsi.c | 42 +++++++++++++++++++++++++----------------- 2 files changed, 25 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d568914c4344..55d4dee133af 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3195,13 +3195,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, qc->nbytes = qc->curbytes = 0; ata_tf_init(ap, &qc->tf, dev->devno); - - if (dev->flags & ATA_DFLAG_LBA) { - qc->tf.flags |= ATA_TFLAG_LBA; - - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; - } } return qc; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c64169ca7ff0..ea7a4d8a6fc9 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -492,7 +492,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if ((tf->flags & ATA_TFLAG_LBA48) && + if ((qc->dev->flags & ATA_DFLAG_LBA48) && (ata_id_has_flush_ext(qc->dev->id))) tf->command = ATA_CMD_FLUSH_EXT; else @@ -612,8 +612,6 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - unsigned int lba = tf->flags & ATA_TFLAG_LBA; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; u64 block; u32 n_block; @@ -634,16 +632,16 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) goto out_of_range; if ((block + n_block) > dev_sectors) goto out_of_range; - if (lba48) { - if (n_block > (64 * 1024)) - goto invalid_fld; - } else { - if (n_block > 256) - goto invalid_fld; - } - if (lba) { - if (lba48) { + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) { + if (n_block > (64 * 1024)) + goto invalid_fld; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; tf->command = ATA_CMD_VERIFY_EXT; tf->hob_nsect = (n_block >> 8) & 0xff; @@ -652,6 +650,10 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; } else { + if (n_block > 256) + goto invalid_fld; + + /* use LBA28 */ tf->command = ATA_CMD_VERIFY; tf->device |= (block >> 24) & 0xf; @@ -668,6 +670,9 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* CHS */ u32 sect, head, cyl, track; + if (n_block > 256) + goto invalid_fld; + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; @@ -733,8 +738,6 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - unsigned int lba = tf->flags & ATA_TFLAG_LBA; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 block; u32 n_block; @@ -783,19 +786,24 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) */ goto nothing_to_do; - if (lba) { - if (lba48) { + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) { /* The request -may- be too large for LBA48. */ if ((block >> 48) || (n_block > 65536)) goto out_of_range; + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->hob_nsect = (n_block >> 8) & 0xff; tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; } else { - /* LBA28 */ + /* use LBA28 */ /* The request -may- be too large for LBA28. */ if ((block >> 28) || (n_block > 256)) -- cgit v1.2.3 From 8cbd6df1f0ce977ab7b61feffa59879bb5e0ed8f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:06:27 +0800 Subject: [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee ============== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 105 ++++++++++++++++----------------------------- drivers/scsi/libata-scsi.c | 13 +++--- drivers/scsi/libata.h | 1 + include/linux/ata.h | 4 ++ include/linux/libata.h | 6 +-- 5 files changed, 50 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 55d4dee133af..19d3d717faf6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -616,79 +616,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) tf->hob_nsect = fis[13]; } -/** - * ata_prot_to_cmd - determine which read/write opcodes to use - * @protocol: ATA_PROT_xxx taskfile protocol - * @lba48: true is lba48 is present - * - * Given necessary input, determine which read/write commands - * to use to transfer data. - * - * LOCKING: - * None. - */ -static int ata_prot_to_cmd(int protocol, int lba48) -{ - int rcmd = 0, wcmd = 0; - - switch (protocol) { - case ATA_PROT_PIO: - if (lba48) { - rcmd = ATA_CMD_PIO_READ_EXT; - wcmd = ATA_CMD_PIO_WRITE_EXT; - } else { - rcmd = ATA_CMD_PIO_READ; - wcmd = ATA_CMD_PIO_WRITE; - } - break; - - case ATA_PROT_DMA: - if (lba48) { - rcmd = ATA_CMD_READ_EXT; - wcmd = ATA_CMD_WRITE_EXT; - } else { - rcmd = ATA_CMD_READ; - wcmd = ATA_CMD_WRITE; - } - break; - - default: - return -1; - } - - return rcmd | (wcmd << 8); -} +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT +}; /** - * ata_dev_set_protocol - set taskfile protocol and r/w commands - * @dev: device to examine and configure + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure * - * Examine the device configuration, after we have - * read the identify-device page and configured the - * data transfer mode. Set internal state related to - * the ATA taskfile protocol (pio, pio mult, dma, etc.) - * and calculate the proper read/write commands to use. + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. * * LOCKING: * caller. */ -static void ata_dev_set_protocol(struct ata_device *dev) +void ata_rwcmd_protocol(struct ata_queued_cmd *qc) { - int pio = (dev->flags & ATA_DFLAG_PIO); - int lba48 = (dev->flags & ATA_DFLAG_LBA48); - int proto, cmd; + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; - if (pio) - proto = dev->xfer_protocol = ATA_PROT_PIO; - else - proto = dev->xfer_protocol = ATA_PROT_DMA; + int index, lba48, write; + + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - cmd = ata_prot_to_cmd(proto, lba48); - if (cmd < 0) - BUG(); + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 4; + } else { + tf->protocol = ATA_PROT_DMA; + index = 8; + } - dev->read_cmd = cmd & 0xff; - dev->write_cmd = (cmd >> 8) & 0xff; + tf->command = ata_rw_cmds[index + lba48 + write]; } static const char * xfer_mode_str[] = { @@ -1641,7 +1615,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, */ static void ata_set_mode(struct ata_port *ap) { - unsigned int i, xfer_shift; + unsigned int xfer_shift; u8 xfer_mode; int rc; @@ -1670,11 +1644,6 @@ static void ata_set_mode(struct ata_port *ap) if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - for (i = 0; i < 2; i++) { - struct ata_device *dev = &ap->device[i]; - ata_dev_set_protocol(dev); - } - return; err_out: diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ea7a4d8a6fc9..90bf22204668 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -742,15 +742,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf->protocol = qc->dev->xfer_protocol; - if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || - scsicmd[0] == READ_16) { - tf->command = qc->dev->read_cmd; - } else { - tf->command = qc->dev->write_cmd; + if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || + scsicmd[0] == WRITE_16) tf->flags |= ATA_TFLAG_WRITE; - } /* Calculate the SCSI LBA and transfer length. */ switch (scsicmd[0]) { @@ -812,6 +807,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->device |= (block >> 24) & 0xf; } + ata_rwcmd_protocol(qc); + qc->nsect = n_block; tf->nsect = n_block & 0xff; @@ -828,6 +825,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) if ((block >> 28) || (n_block > 256)) goto out_of_range; + ata_rwcmd_protocol(qc); + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index a18f2ac1d4a1..67d752ca8ae2 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -42,6 +42,7 @@ extern int atapi_enabled; extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); +extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); diff --git a/include/linux/ata.h b/include/linux/ata.h index ecb7346d0c16..630908c9378b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -128,6 +128,10 @@ enum { ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, ATA_CMD_PIO_WRITE_EXT = 0x34, + ATA_CMD_READ_MULTI = 0xC4, + ATA_CMD_READ_MULTI_EXT = 0x29, + ATA_CMD_WRITE_MULTI = 0xC5, + ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, diff --git a/include/linux/libata.h b/include/linux/libata.h index 7929cfc9318d..0261c55f3483 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -283,10 +283,8 @@ struct ata_device { u8 xfer_mode; unsigned int xfer_shift; /* ATA_SHIFT_xxx */ - /* cache info about current transfer mode */ - u8 xfer_protocol; /* taskfile xfer protocol */ - u8 read_cmd; /* opcode to use on read */ - u8 write_cmd; /* opcode to use on write */ + unsigned int multi_count; /* sectors count for + READ/WRITE MULTIPLE */ /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ -- cgit v1.2.3 From 59a10b172fccaea793352c00fd9065f0a5b4ef70 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:09:42 +0800 Subject: [PATCH] libata CHS: reread device identify info (revise #6) problem: id[53-58] might be changed after initializing device CHS settings. changes: - call ata_dev_reread_id() to reread the identify device info, after initializing device CHS settings. Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 65 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 64 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 19d3d717faf6..175d4646333d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -63,6 +63,7 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); @@ -1240,9 +1241,15 @@ retry: * anything else.. * Some drives were very specific about that exact sequence. */ - if (major_version < 4 || (!ata_id_has_lba(dev->id))) + if (major_version < 4 || (!ata_id_has_lba(dev->id))) { ata_dev_init_params(ap, dev); + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + ata_dev_reread_id(ap, dev); + } + if (ata_id_has_lba(dev->id)) { dev->flags |= ATA_DFLAG_LBA; @@ -2150,6 +2157,62 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) DPRINTK("EXIT\n"); } +/** + * ata_dev_reread_id - Reread the device identify device info + * @ap: port where the device is + * @dev: device to reread the identify device info + * + * LOCKING: + */ + +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + ata_sg_init_one(qc, dev->id, sizeof(dev->id)); + qc->dma_dir = DMA_FROM_DEVICE; + + if (dev->class == ATA_DEV_ATA) { + qc->tf.command = ATA_CMD_ID_ATA; + DPRINTK("do ATA identify\n"); + } else { + qc->tf.command = ATA_CMD_ID_ATAPI; + DPRINTK("do ATAPI identify\n"); + } + + qc->tf.flags |= ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_PIO; + qc->nsect = 1; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + goto err_out; + + wait_for_completion(&wait); + + swap_buf_le16(dev->id, ATA_ID_WORDS); + + ata_dump_id(dev); + + DPRINTK("EXIT\n"); + + return; +err_out: + ata_port_disable(ap); +} + /** * ata_dev_init_params - Issue INIT DEV PARAMS command * @ap: Port associated with device @dev -- cgit v1.2.3 From 7150bf8a98f14f1ba67e090ef2778004c746f465 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 18 Oct 2005 14:46:38 -0700 Subject: [IB] mthca: Don't enter QP into MCG more than once. Avoid entering a QP as member of a multicast group multiple times. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_mcg.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index 9a0612a9d304..b47ea7daf088 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -185,7 +185,12 @@ int mthca_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) } for (i = 0; i < MTHCA_QP_PER_MGM; ++i) - if (!(mgm->qp[i] & cpu_to_be32(1 << 31))) { + if (mgm->qp[i] == cpu_to_be32(ibqp->qp_num | (1 << 31))) { + mthca_dbg(dev, "QP %06x already a member of MGM\n", + ibqp->qp_num); + err = 0; + goto out; + } else if (!(mgm->qp[i] & cpu_to_be32(1 << 31))) { mgm->qp[i] = cpu_to_be32(ibqp->qp_num | (1 << 31)); break; } -- cgit v1.2.3 From f567ef935094003ee70ea3fd10f5695d349c0f48 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:24 +0100 Subject: [PATCH] sb1250-mac: Check the actual setting for reporting hw checksumming. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 7abd55a4fb21..0f828da0339d 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -2419,7 +2419,7 @@ static int sbmac_init(struct net_device *dev, int idx) if (err) goto out_uninit; - if (periph_rev >= 2) { + if (sc->rx_hw_checksum == ENABLE) { printk(KERN_INFO "%s: enabling TCP rcv checksum\n", sc->sbm_dev->name); } -- cgit v1.2.3 From 04115def6ad7ef51440365b65a7324fcb82d5d1d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:36 +0100 Subject: [PATCH] sb1250-mac: Ensure 16-byte alignment of the descriptor ring. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 0f828da0339d..cb4ea4158457 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -750,7 +750,14 @@ static void sbdma_initctx(sbmacdma_t *d, d->sbdma_maxdescr = maxdescr; d->sbdma_dscrtable = (sbdmadscr_t *) - kmalloc(d->sbdma_maxdescr*sizeof(sbdmadscr_t), GFP_KERNEL); + kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL); + + /* + * The descriptor table must be aligned to at least 16 bytes or the + * MAC will corrupt it. + */ + d->sbdma_dscrtable = (sbdmadscr_t *) + ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t)); memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t)); -- cgit v1.2.3 From 7f553e3db46b36d2662e1118f8b8fdbf086b76df Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:41 +0100 Subject: [PATCH] au1000_eth: Misc Au1000 net driver fixes. o Add support for DP83847 MII. o remove unused variable. o Add some initialisations so even an unknown MII won't result in a crash. o Correct error message to "no known MIIs found". Signed-off-by: Ralf Baechle drivers/net/au1000_eth.c | 13 +++++-------- 1 files changed, 5 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/au1000_eth.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index c82b9cd1c924..78506911d656 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -151,13 +151,6 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES]; SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ SUPPORTED_Autoneg -static char *phy_link[] = -{ "unknown", - "10Base2", "10BaseT", - "AUI", - "100BaseT", "100BaseTX", "100BaseFX" -}; - int bcm_5201_init(struct net_device *dev, int phy_addr) { s16 data; @@ -785,6 +778,7 @@ static struct mii_chip_info { {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, + {"NS DP83847 PHY", 0x2000, 0x5c30, &bcm_5201_ops ,0}, {"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0}, {"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0}, {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0}, @@ -1045,7 +1039,7 @@ found: #endif if (aup->mii->chip_info == NULL) { - printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", + printk(KERN_ERR "%s: Au1x No known MII transceivers found!\n", dev->name); return -1; } @@ -1546,6 +1540,9 @@ au1000_probe(u32 ioaddr, int irq, int port_num) printk(KERN_ERR "%s: out of memory\n", dev->name); goto err_out; } + aup->mii->next = NULL; + aup->mii->chip_info = NULL; + aup->mii->status = 0; aup->mii->mii_control_reg = 0; aup->mii->mii_data_reg = 0; -- cgit v1.2.3 From bc053d45cb0ca5daeaa69ae9ac43cdea42693f60 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:46 +0100 Subject: [PATCH] de2104x: Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle drivers/net/tulip/de2104x.c | 5 +++++ 1 files changed, 5 insertions(+) Signed-off-by: Jeff Garzik --- drivers/net/tulip/de2104x.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index a22d00198e4d..6b8eee8f7bfd 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1787,10 +1787,15 @@ static void __init de21041_get_srom_info (struct de_private *de) /* DEC now has a specification but early board makers just put the address in the first EEPROM locations. */ /* This does memcmp(eedata, eedata+16, 8) */ + +#ifndef CONFIG_MIPS_COBALT + for (i = 0; i < 8; i ++) if (ee_data[i] != ee_data[16+i]) sa_offset = 20; +#endif + /* store MAC address */ for (i = 0; i < 6; i ++) de->dev->dev_addr[i] = ee_data[i + sa_offset]; -- cgit v1.2.3 From 2891439e7378e35534d7eb32f77671dc4d61db4c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:51 +0100 Subject: [PATCH] sgiseeq: Fix resource handling. Signed-off-by: Ralf Baechle drivers/net/sgiseeq.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sgiseeq.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index 9bc3b1c0dd6a..a9d2e4fd0aec 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -493,11 +493,13 @@ static int sgiseeq_close(struct net_device *dev) { struct sgiseeq_private *sp = netdev_priv(dev); struct sgiseeq_regs *sregs = sp->sregs; + unsigned int irq = dev->irq; netif_stop_queue(dev); /* Shutdown the Seeq. */ reset_hpc3_and_seeq(sp->hregs, sregs); + free_irq(irq, dev); return 0; } @@ -734,7 +736,7 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) return 0; err_out_free_page: - free_page((unsigned long) sp); + free_page((unsigned long) sp->srings); err_out_free_dev: kfree(dev); @@ -754,15 +756,12 @@ static void __exit sgiseeq_exit(void) { struct net_device *next, *dev; struct sgiseeq_private *sp; - int irq; for (dev = root_sgiseeq_dev; dev; dev = next) { sp = (struct sgiseeq_private *) netdev_priv(dev); next = sp->next_module; - irq = dev->irq; unregister_netdev(dev); - free_irq(irq, dev); - free_page((unsigned long) sp); + free_page((unsigned long) sp->srings); free_netdev(dev); } } -- cgit v1.2.3 From 302a5c4b3d4d6aff7772a4b3431bb772586e6011 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:56 +0100 Subject: [PATCH] sgiseeq: Configure PIO and DMA timing requests. Signed-off-by: Ralf Baechle drivers/net/sgiseeq.c | 28 ++++++++++++++-------------- include/asm-mips/sgi/hpc3.h | 40 ++++++++++++++++++++-------------------- 2 files changed, 34 insertions(+), 34 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sgiseeq.c | 28 ++++++++++++++-------------- include/asm-mips/sgi/hpc3.h | 40 ++++++++++++++++++++-------------------- 2 files changed, 34 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index a9d2e4fd0aec..a4614df38a90 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -32,8 +32,6 @@ #include "sgiseeq.h" -static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n"; - static char *sgiseeqstr = "SGI Seeq8003"; /* @@ -113,9 +111,9 @@ static struct net_device *root_sgiseeq_dev; static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) { - hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ; + hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; udelay(20); - hregs->rx_reset = 0; + hregs->reset = 0; } static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, @@ -252,7 +250,6 @@ void sgiseeq_dump_rings(void) #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) -#define RDMACFG_INIT (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ) static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, struct sgiseeq_regs *sregs) @@ -274,8 +271,6 @@ static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, sregs->tstat = TSTAT_INIT_SEEQ; } - hregs->rx_dconfig |= RDMACFG_INIT; - hregs->rx_ndptr = CPHYSADDR(sp->rx_desc); hregs->tx_ndptr = CPHYSADDR(sp->tx_desc); @@ -446,7 +441,7 @@ static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id, struct pt_regs *regs spin_lock(&sp->tx_lock); /* Ack the IRQ and set software state. */ - hregs->rx_reset = HPC3_ERXRST_CLRIRQ; + hregs->reset = HPC3_ERST_CLRIRQ; /* Always check for received packets. */ sgiseeq_rx(dev, sp, hregs, sregs); @@ -646,7 +641,7 @@ static inline void setup_rx_ring(struct sgiseeq_rx_desc *buf, int nbufs) #define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) -static int sgiseeq_init(struct hpc3_regs* regs, int irq) +static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq) { struct sgiseeq_init_block *sr; struct sgiseeq_private *sp; @@ -682,8 +677,8 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) gpriv = sp; gdev = dev; #endif - sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0]; - sp->hregs = &hpc3c0->ethregs; + sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; + sp->hregs = &hpcregs->ethregs; sp->name = sgiseeqstr; sp->mode = SEEQ_RCMD_RBCAST; @@ -700,6 +695,11 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) setup_rx_ring(sp->rx_desc, SEEQ_RX_BUFFERS); setup_tx_ring(sp->tx_desc, SEEQ_TX_BUFFERS); + /* Setup PIO and DMA transfer timing */ + sp->hregs->pconfig = 0x161; + sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | + HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + /* Reset the chip. */ hpc3_eth_reset(sp->hregs); @@ -726,7 +726,7 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) goto err_out_free_page; } - printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name); + printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr); for (i = 0; i < 6; i++) printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); @@ -746,8 +746,6 @@ err_out: static int __init sgiseeq_probe(void) { - printk(version); - /* On board adapter on 1st HPC is always present */ return sgiseeq_init(hpc3c0, SGI_ENET_IRQ); } @@ -769,4 +767,6 @@ static void __exit sgiseeq_exit(void) module_init(sgiseeq_probe); module_exit(sgiseeq_exit); +MODULE_DESCRIPTION("SGI Seeq 8003 driver"); +MODULE_AUTHOR("Linux/MIPS Mailing List "); MODULE_LICENSE("GPL"); diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h index ac3dfc7af5b0..fcec52bafb25 100644 --- a/include/asm-mips/sgi/hpc3.h +++ b/include/asm-mips/sgi/hpc3.h @@ -128,26 +128,26 @@ struct hpc3_ethregs { volatile u32 rx_gfptr; /* current GIO fifo ptr */ volatile u32 rx_dfptr; /* current device fifo ptr */ u32 _unused1; /* padding */ - volatile u32 rx_reset; /* reset register */ -#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */ -#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */ -#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ - - volatile u32 rx_dconfig; /* DMA configuration register */ -#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ -#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ -#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ -#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ -#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ -#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ -#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ -#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */ - - volatile u32 rx_pconfig; /* PIO configuration register */ -#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ -#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ -#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ -#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ + volatile u32 reset; /* reset register */ +#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ +#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ +#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ + + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ +#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ +#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ +#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ +#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ +#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ +#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ +#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ +#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ +#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ +#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ u32 _unused2[0x1000/4 - 8]; /* padding */ -- cgit v1.2.3 From da848ec37d9cf9edbe269f8be9b3de52f90d70da Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:01 +0100 Subject: [PATCH] declance: Convert to irqreturn_t. Signed-off-by: Ralf Baechle drivers/net/declance.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 521c83137bf6..636763b5102e 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -697,12 +697,13 @@ out: spin_unlock(&lp->lock); } -static void lance_dma_merr_int(const int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t lance_dma_merr_int(const int irq, void *dev_id, + struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; printk("%s: DMA error\n", dev->name); + return IRQ_HANDLED; } static irqreturn_t -- cgit v1.2.3 From 6684b4e28247f31543edf86ba785aa87e8fa3b39 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:06 +0100 Subject: [PATCH] declance: Fix mapping of device. These should really be addresses obtained with ioremap() or some bus-specific backend, but for now... Signed-off-by: Ralf Baechle drivers/net/declance.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 636763b5102e..3af78340d963 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -237,7 +237,7 @@ struct lance_init_block { /* * This works *only* for the ring descriptors */ -#define LANCE_ADDR(x) (PHYSADDR(x) >> 1) +#define LANCE_ADDR(x) (CPHYSADDR(x) >> 1) struct lance_private { struct net_device *next; @@ -1102,7 +1102,7 @@ static int __init dec_lance_init(const int type, const int slot) /* Setup I/O ASIC LANCE DMA. */ lp->dma_irq = dec_interrupt[DEC_IRQ_LANCE_MERR]; ioasic_write(IO_REG_LANCE_DMA_P, - PHYSADDR(dev->mem_start) << 3); + CPHYSADDR(dev->mem_start) << 3); break; -- cgit v1.2.3 From 4569504a36cb6223e2b7ad6530326a1563a8f456 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:11 +0100 Subject: [PATCH] declance: Deal with the bloody KSEG vs CKSEG horror... Signed-off-by: Ralf Baechle drivers/net/declance.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 3af78340d963..b47e3cf16516 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -1069,7 +1069,7 @@ static int __init dec_lance_init(const int type, const int slot) /* * FIXME: ugly hack! */ - dev->mem_start = KSEG1ADDR(0x00020000); + dev->mem_start = CKSEG1ADDR(0x00020000); dev->mem_end = dev->mem_start + 0x00020000; dev->irq = dec_interrupt[DEC_IRQ_LANCE]; esar_base = system_base + IOASIC_ESAR; -- cgit v1.2.3 From 36156cdff17a5ab822898d33cd890a6f8287c43c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:16 +0100 Subject: [PATCH] declance: Use physical addresses at the interface level. Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle drivers/net/declance.c | 26 ++++++++++---------------- 1 files changed, 10 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/declance.c b/drivers/net/declance.c index b47e3cf16516..f130bdab3fd3 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -5,7 +5,7 @@ * * adopted from sunlance.c by Richard van den Berg * - * Copyright (C) 2002, 2003 Maciej W. Rozycki + * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki * * additional sources: * - PMAD-AA TURBOchannel Ethernet Module Functional Specification, @@ -57,13 +57,15 @@ #include #include +#include + #include #include #include #include #include +#include #include -#include static char version[] __devinitdata = "declance.c: v0.009 by Linux MIPS DECstation task force\n"; @@ -79,10 +81,6 @@ MODULE_LICENSE("GPL"); #define PMAD_LANCE 2 #define PMAX_LANCE 3 -#ifndef CONFIG_TC -unsigned long system_base; -unsigned long dmaptr; -#endif #define LE_CSR0 0 #define LE_CSR1 1 @@ -1027,10 +1025,6 @@ static int __init dec_lance_init(const int type, const int slot) unsigned long esar_base; unsigned char *esar; -#ifndef CONFIG_TC - system_base = KN01_LANCE_BASE; -#endif - if (dec_lance_debug && version_printed++ == 0) printk(version); @@ -1063,7 +1057,7 @@ static int __init dec_lance_init(const int type, const int slot) switch (type) { #ifdef CONFIG_TC case ASIC_LANCE: - dev->base_addr = system_base + IOASIC_LANCE; + dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE); /* buffer space for the on-board LANCE shared memory */ /* @@ -1072,7 +1066,7 @@ static int __init dec_lance_init(const int type, const int slot) dev->mem_start = CKSEG1ADDR(0x00020000); dev->mem_end = dev->mem_start + 0x00020000; dev->irq = dec_interrupt[DEC_IRQ_LANCE]; - esar_base = system_base + IOASIC_ESAR; + esar_base = CKSEG1ADDR(dec_kn_slot_base + IOASIC_ESAR); /* Workaround crash with booting KN04 2.1k from Disk */ memset((void *)dev->mem_start, 0, @@ -1109,7 +1103,7 @@ static int __init dec_lance_init(const int type, const int slot) case PMAD_LANCE: claim_tc_card(slot); - dev->mem_start = get_tc_base_addr(slot); + dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot)); dev->base_addr = dev->mem_start + 0x100000; dev->irq = get_tc_irq_nr(slot); esar_base = dev->mem_start + 0x1c0002; @@ -1138,9 +1132,9 @@ static int __init dec_lance_init(const int type, const int slot) case PMAX_LANCE: dev->irq = dec_interrupt[DEC_IRQ_LANCE]; - dev->base_addr = KN01_LANCE_BASE; - dev->mem_start = KN01_LANCE_BASE + 0x01000000; - esar_base = KN01_RTC_BASE + 1; + dev->base_addr = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE); + dev->mem_start = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE_MEM); + esar_base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_ESAR + 1); lp->dma_irq = -1; /* -- cgit v1.2.3 From 9cc975e00ddb291035bc4d2d49cdc8768ddf1cc3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:21 +0100 Subject: [PATCH] ne: Support for RBHMA4500 eval board. Support for Toshiba's RBHMA4500 eval board for the TX4938. Signed-off-by: Ralf Baechle drivers/net/ne.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+) Signed-off-by: Jeff Garzik --- drivers/net/ne.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ne.c b/drivers/net/ne.c index d209a1556b2e..0de8fdd2aa86 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -54,6 +54,10 @@ static const char version2[] = #include #include +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) +#include +#endif + #include "8390.h" #define DRV_NAME "ne" @@ -111,6 +115,9 @@ bad_clone_list[] __initdata = { {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */ {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */ {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */ +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) + {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */ +#endif {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */ {NULL,} }; @@ -226,6 +233,10 @@ struct net_device * __init ne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); +#ifdef CONFIG_TOSHIBA_RBTX4938 + dev->base_addr = 0x07f20280; + dev->irq = RBTX4938_RTL_8019_IRQ; +#endif err = do_ne_probe(dev); if (err) goto out; @@ -506,6 +517,10 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) ei_status.name = name; ei_status.tx_start_page = start_page; ei_status.stop_page = stop_page; +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) + wordlength = 1; +#endif + #ifdef CONFIG_PLAT_OAKS32R ei_status.word16 = 0; #else -- cgit v1.2.3 From dcbf8477567c312c9f0512545d07e05175d740a4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:27 +0100 Subject: [PATCH] mipsnet: Virtual ethernet driver for MIPSsim. Signed-off-by: Ralf Baechle drivers/net/Kconfig | 8 + drivers/net/Makefile | 1 drivers/net/mipsnet.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/mipsnet.h | 127 +++++++++++++++++ 4 files changed, 507 insertions(+) Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 8 ++ drivers/net/Makefile | 1 + drivers/net/mipsnet.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/mipsnet.h | 127 +++++++++++++++++ 4 files changed, 507 insertions(+) create mode 100644 drivers/net/mipsnet.c create mode 100644 drivers/net/mipsnet.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0a30368d2efc..5148d47492a0 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -475,6 +475,14 @@ config SGI_IOC3_ETH_HW_TX_CSUM the moment only acceleration of IPv4 is supported. This option enables offloading for checksums on transmit. If unsure, say Y. +config MIPS_SIM_NET + tristate "MIPS simulator Network device (EXPERIMENTAL)" + depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL + help + The MIPSNET device is a simple Ethernet network device which is + emulated by the MIPS Simulator. + If you are not using a MIPSsim or are unsure, say N. + config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" depends on NET_ETHERNET && SGI_IP32=y diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4c9477cb2127..1a84e0435f64 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -167,6 +167,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o +obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o obj-$(CONFIG_DECLANCE) += declance.o obj-$(CONFIG_ATARILANCE) += atarilance.o diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c new file mode 100644 index 000000000000..f79f7ee72ab8 --- /dev/null +++ b/drivers/net/mipsnet.c @@ -0,0 +1,371 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mipsnet.h" /* actual device IO mapping */ + +#define MIPSNET_VERSION "2005-06-20" + +#define mipsnet_reg_address(dev, field) (dev->base_addr + field_offset(field)) + +struct mipsnet_priv { + struct net_device_stats stats; +}; + +static struct platform_device *mips_plat_dev; + +static char mipsnet_string[] = "mipsnet"; + +/* + * Copy data from the MIPSNET rx data port + */ +static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata, + int len) +{ + uint32_t available_len = inl(mipsnet_reg_address(dev, rxDataCount)); + if (available_len < len) + return -EFAULT; + + for (; len > 0; len--, kdata++) { + *kdata = inb(mipsnet_reg_address(dev, rxDataBuffer)); + } + + return inl(mipsnet_reg_address(dev, rxDataCount)); +} + +static inline ssize_t mipsnet_put_todevice(struct net_device *dev, + struct sk_buff *skb) +{ + int count_to_go = skb->len; + char *buf_ptr = skb->data; + struct mipsnet_priv *mp = netdev_priv(dev); + + pr_debug("%s: %s(): telling MIPSNET txDataCount(%d)\n", + dev->name, __FUNCTION__, skb->len); + + outl(skb->len, mipsnet_reg_address(dev, txDataCount)); + + pr_debug("%s: %s(): sending data to MIPSNET txDataBuffer(%d)\n", + dev->name, __FUNCTION__, skb->len); + + for (; count_to_go; buf_ptr++, count_to_go--) { + outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer)); + } + + mp->stats.tx_packets++; + mp->stats.tx_bytes += skb->len; + + return skb->len; +} + +static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev) +{ + pr_debug("%s:%s(): transmitting %d bytes\n", + dev->name, __FUNCTION__, skb->len); + + /* Only one packet at a time. Once TXDONE interrupt is serviced, the + * queue will be restarted. + */ + netif_stop_queue(dev); + mipsnet_put_todevice(dev, skb); + + return 0; +} + +static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count) +{ + struct sk_buff *skb; + size_t len = count; + struct mipsnet_priv *mp = netdev_priv(dev); + + if (!(skb = alloc_skb(len + 2, GFP_KERNEL))) { + mp->stats.rx_dropped++; + return -ENOMEM; + } + + skb_reserve(skb, 2); + if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len)) + return -EFAULT; + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + pr_debug("%s:%s(): pushing RXed data to kernel\n", + dev->name, __FUNCTION__); + netif_rx(skb); + + mp->stats.rx_packets++; + mp->stats.rx_bytes += len; + + return count; +} + +static irqreturn_t +mipsnet_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + + irqreturn_t retval = IRQ_NONE; + uint64_t interruptFlags; + + if (irq == dev->irq) { + pr_debug("%s:%s(): irq %d for device\n", + dev->name, __FUNCTION__, irq); + + retval = IRQ_HANDLED; + + interruptFlags = + inl(mipsnet_reg_address(dev, interruptControl)); + pr_debug("%s:%s(): intCtl=0x%016llx\n", dev->name, + __FUNCTION__, interruptFlags); + + if (interruptFlags & MIPSNET_INTCTL_TXDONE) { + pr_debug("%s:%s(): got TXDone\n", + dev->name, __FUNCTION__); + outl(MIPSNET_INTCTL_TXDONE, + mipsnet_reg_address(dev, interruptControl)); + // only one packet at a time, we are done. + netif_wake_queue(dev); + } else if (interruptFlags & MIPSNET_INTCTL_RXDONE) { + pr_debug("%s:%s(): got RX data\n", + dev->name, __FUNCTION__); + mipsnet_get_fromdev(dev, + inl(mipsnet_reg_address(dev, rxDataCount))); + pr_debug("%s:%s(): clearing RX int\n", + dev->name, __FUNCTION__); + outl(MIPSNET_INTCTL_RXDONE, + mipsnet_reg_address(dev, interruptControl)); + + } else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) { + pr_debug("%s:%s(): got test interrupt\n", + dev->name, __FUNCTION__); + // TESTBIT is cleared on read. + // And takes effect after a write with 0 + outl(0, mipsnet_reg_address(dev, interruptControl)); + } else { + pr_debug("%s:%s(): no valid fags 0x%016llx\n", + dev->name, __FUNCTION__, interruptFlags); + // Maybe shared IRQ, just ignore, no clearing. + retval = IRQ_NONE; + } + + } else { + printk(KERN_INFO "%s: %s(): irq %d for unknown device\n", + dev->name, __FUNCTION__, irq); + retval = IRQ_NONE; + } + return retval; +} //mipsnet_interrupt() + +static int mipsnet_open(struct net_device *dev) +{ + int err; + pr_debug("%s: mipsnet_open\n", dev->name); + + err = request_irq(dev->irq, &mipsnet_interrupt, + SA_SHIRQ, dev->name, (void *) dev); + + if (err) { + pr_debug("%s: %s(): can't get irq %d\n", + dev->name, __FUNCTION__, dev->irq); + release_region(dev->base_addr, MIPSNET_IO_EXTENT); + return err; + } + + pr_debug("%s: %s(): got IO region at 0x%04lx and irq %d for dev.\n", + dev->name, __FUNCTION__, dev->base_addr, dev->irq); + + + netif_start_queue(dev); + + // test interrupt handler + outl(MIPSNET_INTCTL_TESTBIT, + mipsnet_reg_address(dev, interruptControl)); + + + return 0; +} + +static int mipsnet_close(struct net_device *dev) +{ + pr_debug("%s: %s()\n", dev->name, __FUNCTION__); + netif_stop_queue(dev); + return 0; +} + +static struct net_device_stats *mipsnet_get_stats(struct net_device *dev) +{ + struct mipsnet_priv *mp = netdev_priv(dev); + + return &mp->stats; +} + +static void mipsnet_set_mclist(struct net_device *dev) +{ + // we don't do anything + return; +} + +static int __init mipsnet_probe(struct device *dev) +{ + struct net_device *netdev; + int err; + + netdev = alloc_etherdev(sizeof(struct mipsnet_priv)); + if (!netdev) { + err = -ENOMEM; + goto out; + } + + dev_set_drvdata(dev, netdev); + + netdev->open = mipsnet_open; + netdev->stop = mipsnet_close; + netdev->hard_start_xmit = mipsnet_xmit; + netdev->get_stats = mipsnet_get_stats; + netdev->set_multicast_list = mipsnet_set_mclist; + + /* + * TODO: probe for these or load them from PARAM + */ + netdev->base_addr = 0x4200; + netdev->irq = MIPSCPU_INT_BASE + MIPSCPU_INT_MB0 + + inl(mipsnet_reg_address(netdev, interruptInfo)); + + // Get the io region now, get irq on open() + if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) { + pr_debug("%s: %s(): IO region {start: 0x%04lux, len: %d} " + "for dev is not availble.\n", netdev->name, + __FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT); + err = -EBUSY; + goto out_free_netdev; + } + + /* + * Lacking any better mechanism to allocate a MAC address we use a + * random one ... + */ + random_ether_addr(netdev->dev_addr); + + err = register_netdev(netdev); + if (err) { + printk(KERN_ERR "MIPSNet: failed to register netdev.\n"); + goto out_free_region; + } + + return 0; + +out_free_region: + release_region(netdev->base_addr, MIPSNET_IO_EXTENT); + +out_free_netdev: + free_netdev(netdev); + +out: + return err; +} + +static int __devexit mipsnet_device_remove(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + + unregister_netdev(dev); + release_region(dev->base_addr, MIPSNET_IO_EXTENT); + free_netdev(dev); + dev_set_drvdata(device, NULL); + + return 0; +} + +static struct device_driver mipsnet_driver = { + .name = mipsnet_string, + .bus = &platform_bus_type, + .probe = mipsnet_probe, + .remove = __devexit_p(mipsnet_device_remove), +}; + +static void mipsnet_platform_release(struct device *device) +{ + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device(device); + kfree(pldev); +} + +static int __init mipsnet_init_module(void) +{ + struct platform_device *pldev; + int err; + + printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. " + "(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION); + + if (driver_register(&mipsnet_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + err = -ENODEV; + goto out; + } + + if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) { + err = -ENOMEM; + goto out_unregister_driver; + } + + memset (pldev, 0, sizeof (*pldev)); + pldev->name = mipsnet_string; + pldev->id = 0; + pldev->dev.release = mipsnet_platform_release; + + if (platform_device_register(pldev)) { + err = -ENODEV; + goto out_free_pldev; + } + + if (!pldev->dev.driver) { + /* + * The driver was not bound to this device, there was + * no hardware at this address. Unregister it, as the + * release fuction will take care of freeing the + * allocated structure + */ + platform_device_unregister (pldev); + } + + mips_plat_dev = pldev; + + return 0; + +out_free_pldev: + kfree(pldev); + +out_unregister_driver: + driver_unregister(&mipsnet_driver); +out: + return err; +} + +static void __exit mipsnet_exit_module(void) +{ + pr_debug("MIPSNet Ethernet driver exiting\n"); + + driver_unregister(&mipsnet_driver); +} + +module_init(mipsnet_init_module); +module_exit(mipsnet_exit_module); diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h new file mode 100644 index 000000000000..878535953cb1 --- /dev/null +++ b/drivers/net/mipsnet.h @@ -0,0 +1,127 @@ +// +// +// Unpublished work (c) MIPS Technologies, Inc. All rights reserved. +// Unpublished rights reserved under the copyright laws of the U.S.A. and +// other countries. +// +// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC. +// FOR INTERNAL USE ONLY. +// +// Under no circumstances (contract or otherwise) may this information be +// disclosed to, or copied, modified or used by anyone other than employees +// or contractors of MIPS Technologies having a need to know. +// +// +//++ +// File: MIPS_Net.h +// +// Description: +// The definition of the emulated MIPSNET device's interface. +// +// Notes: This include file needs to work from a Linux device drivers. +// +//-- +// + +#ifndef __MIPSNET_H +#define __MIPSNET_H + +/* + * Id of this Net device, as seen by the core. + */ +#define MIPS_NET_DEV_ID ((uint64_t) \ + ((uint64_t)'M'<< 0)| \ + ((uint64_t)'I'<< 8)| \ + ((uint64_t)'P'<<16)| \ + ((uint64_t)'S'<<24)| \ + ((uint64_t)'N'<<32)| \ + ((uint64_t)'E'<<40)| \ + ((uint64_t)'T'<<48)| \ + ((uint64_t)'0'<<56)) + +/* + * Net status/control block as seen by sw in the core. + * (Why not use bit fields? can't be bothered with cross-platform struct + * packing.) + */ +typedef struct _net_control_block { + /// dev info for probing + /// reads as MIPSNET%d where %d is some form of version + uint64_t devId; /*0x00 */ + + /* + * read only busy flag. + * Set and cleared by the Net Device to indicate that an rx or a tx + * is in progress. + */ + uint32_t busy; /*0x08 */ + + /* + * Set by the Net Device. + * The device will set it once data has been received. + * The value is the number of bytes that should be read from + * rxDataBuffer. The value will decrease till 0 until all the data + * from rxDataBuffer has been read. + */ + uint32_t rxDataCount; /*0x0c */ +#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16) + + /* + * Settable from the MIPS core, cleared by the Net Device. + * The core should set the number of bytes it wants to send, + * then it should write those bytes of data to txDataBuffer. + * The device will clear txDataCount has been processed (not necessarily sent). + */ + uint32_t txDataCount; /*0x10 */ + + /* + * Interrupt control + * + * Used to clear the interrupted generated by this dev. + * Write a 1 to clear the interrupt. (except bit31). + * + * Bit0 is set if it was a tx-done interrupt. + * Bit1 is set when new rx-data is available. + * Until this bit is cleared there will be no other RXs. + * + * Bit31 is used for testing, it clears after a read. + * Writing 1 to this bit will cause an interrupt to be generated. + * To clear the test interrupt, write 0 to this register. + */ + uint32_t interruptControl; /*0x14 */ +#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0)) +#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1)) +#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31)) +#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT) + + /* + * Readonly core-specific interrupt info for the device to signal the core. + * The meaning of the contents of this field might change. + */ + /*###\todo: the whole memIntf interrupt scheme is messy: the device should have + * no control what so ever of what VPE/register set is being used. + * The MemIntf should only expose interrupt lines, and something in the + * config should be responsible for the line<->core/vpe bindings. + */ + uint32_t interruptInfo; /*0x18 */ + + /* + * This is where the received data is read out. + * There is more data to read until rxDataReady is 0. + * Only 1 byte at this regs offset is used. + */ + uint32_t rxDataBuffer; /*0x1c */ + + /* + * This is where the data to transmit is written. + * Data should be written for the amount specified in the txDataCount register. + * Only 1 byte at this regs offset is used. + */ + uint32_t txDataBuffer; /*0x20 */ +} MIPS_T_NetControl; + +#define MIPSNET_IO_EXTENT 0x40 /* being generous */ + +#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field) + +#endif /* __MIPSNET_H */ -- cgit v1.2.3 From 166d823d397b9f5404648cedfdefe13e10683694 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 16 Oct 2005 13:32:14 -0700 Subject: [PATCH] e1000_intr build fix drivers/net/e1000/e1000_main.c: In function `e1000_intr': drivers/net/e1000/e1000_main.c:3156: error: `i' undeclared (first use in this function) drivers/net/e1000/e1000_main.c:3156: error: (Each undeclared identifier is reported only once drivers/net/e1000/e1000_main.c:3156: error: for each function it appears in.) This function is foul. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index dd79449f9a99..18847f9e4d49 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3100,7 +3100,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); -#ifdef CONFIG_E1000_MQ +#if defined(CONFIG_E1000_NAPI) && defined(CONFIG_E1000_MQ) || !defined(CONFIG_E1000_NAPI) int i; #endif -- cgit v1.2.3 From 923833405d8d81b5be036093773d88d87fc7e1bd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 16 Oct 2005 00:11:29 -0700 Subject: [PATCH] s2io build fix Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 30fbaf04773f..d303d162974f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2997,7 +2997,7 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); - if (nic->intr_type == INTA) + if (sp->intr_type == INTA) val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #else -- cgit v1.2.3 From 6ba98d311d0a4ff7dc36d8f435ce60174f4c30ec Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:02 -0400 Subject: [PATCH] via-rhine: change mdelay to msleep and remove from ISR path Get rid of the mdelay call in rhine_disable_linkmon. The function is called from the via-rhine versions of mdio_read and mdio_write. Those functions are indirectly called from rhine_check_media and rhine_tx_timeout, both of which can be called in interrupt context. So, create tx_timeout_task and check_media_task as instances of struct work_struct inside of rhine_private. Then, change rhine_tx_timeout to invoke schedule_work for tx_timeout_task (i.e. rhine_tx_timeout_task), moving the work to process context. Also, change rhine_error (invoked from rhine_interrupt) to invoke schedule_work for check_media_task (i.e. rhine_check_media_task), which simply calls rhine_check media in process context. Finally, add a call to flush_scheduled_work in rhine_close to avoid any resource conflicts with pending work items. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index e7b4bc3820e3..241871589283 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -490,6 +490,8 @@ struct rhine_private { u8 tx_thresh, rx_thresh; struct mii_if_info mii_if; + struct work_struct tx_timeout_task; + struct work_struct check_media_task; void __iomem *base; }; @@ -497,6 +499,8 @@ static int mdio_read(struct net_device *dev, int phy_id, int location); static void mdio_write(struct net_device *dev, int phy_id, int location, int value); static int rhine_open(struct net_device *dev); static void rhine_tx_timeout(struct net_device *dev); +static void rhine_tx_timeout_task(struct net_device *dev); +static void rhine_check_media_task(struct net_device *dev); static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void rhine_tx(struct net_device *dev); @@ -851,6 +855,12 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, if (rp->quirks & rqRhineI) dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; + INIT_WORK(&rp->tx_timeout_task, + (void (*)(void *))rhine_tx_timeout_task, dev); + + INIT_WORK(&rp->check_media_task, + (void (*)(void *))rhine_check_media_task, dev); + /* dev->name not defined before register_netdev()! */ rc = register_netdev(dev); if (rc) @@ -1077,6 +1087,11 @@ static void rhine_check_media(struct net_device *dev, unsigned int init_media) ioaddr + ChipCmd1); } +static void rhine_check_media_task(struct net_device *dev) +{ + rhine_check_media(dev, 0); +} + static void init_registers(struct net_device *dev) { struct rhine_private *rp = netdev_priv(dev); @@ -1130,8 +1145,8 @@ static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks) if (quirks & rqRhineI) { iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR - /* Can be called from ISR. Evil. */ - mdelay(1); + /* Do not call from ISR! */ + msleep(1); /* 0x80 must be set immediately before turning it off */ iowrite8(0x80, ioaddr + MIICmd); @@ -1219,6 +1234,16 @@ static int rhine_open(struct net_device *dev) } static void rhine_tx_timeout(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + + /* + * Move bulk of work outside of interrupt context + */ + schedule_work(&rp->tx_timeout_task); +} + +static void rhine_tx_timeout_task(struct net_device *dev) { struct rhine_private *rp = netdev_priv(dev); void __iomem *ioaddr = rp->base; @@ -1626,7 +1651,7 @@ static void rhine_error(struct net_device *dev, int intr_status) spin_lock(&rp->lock); if (intr_status & IntrLinkChange) - rhine_check_media(dev, 0); + schedule_work(&rp->check_media_task); if (intr_status & IntrStatsMax) { rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); @@ -1874,6 +1899,9 @@ static int rhine_close(struct net_device *dev) spin_unlock_irq(&rp->lock); free_irq(rp->pdev->irq, dev); + + flush_scheduled_work(); + free_rbufs(dev); free_tbufs(dev); free_ring(dev); -- cgit v1.2.3 From b7b1d2021452d0a3562807b6a90dfa5124147a79 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:01 -0400 Subject: [PATCH] epic100: fix counting of work_done in epic_poll work_done is overwritten each time through the rx_action loop in epic_poll. This screws-up the NAPI accounting if the loop is executed more than once. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/epic100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 87f522738bfc..f119ec4e89ea 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -1334,7 +1334,7 @@ static void epic_rx_err(struct net_device *dev, struct epic_private *ep) static int epic_poll(struct net_device *dev, int *budget) { struct epic_private *ep = dev->priv; - int work_done, orig_budget; + int work_done = 0, orig_budget; long ioaddr = dev->base_addr; orig_budget = (*budget > dev->quota) ? dev->quota : *budget; @@ -1343,7 +1343,7 @@ rx_action: epic_tx(dev, ep); - work_done = epic_rx(dev, *budget); + work_done += epic_rx(dev, *budget); epic_rx_err(dev, ep); -- cgit v1.2.3 From 7645baec58b9661366e2038c4ea02bd06aaf1fbc Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:00 -0400 Subject: [PATCH] 8139too: fix resume for Realtek 8100B/8139D Add "HasHltClk" flag for RTL-8100B/8139D hardware in order to fix problems resuming from suspend-to-RAM. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/8139too.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 76ef6efd5950..30bee11c48bd 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -552,7 +552,8 @@ const static struct { { "RTL-8100B/8139D", HW_REVID(1, 1, 1, 0, 1, 0, 1), - HasLWake, + HasHltClk /* XXX undocumented? */ + | HasLWake, }, { "RTL-8101", -- cgit v1.2.3 From df49898a47061e82219c991dfbe9ac6ddf7a866b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:58 -0400 Subject: [PATCH] bonding: cleanup comment for mode 1 IGMP xmit hack Expand comment explaining MAC address selection for replicated IGMP frames transmitted in bonding mode 1 (active-backup). Also, a small whitespace cleanup. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 58c4e36f87d7..8032126fd589 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4242,8 +4242,8 @@ out: } static void bond_activebackup_xmit_copy(struct sk_buff *skb, - struct bonding *bond, - struct slave *slave) + struct bonding *bond, + struct slave *slave) { struct sk_buff *skb2 = skb_copy(skb, GFP_ATOMIC); struct ethhdr *eth_data; @@ -4259,7 +4259,11 @@ static void bond_activebackup_xmit_copy(struct sk_buff *skb, skb2->mac.raw = (unsigned char *)skb2->data; eth_data = eth_hdr(skb2); - /* Pick an appropriate source MAC address */ + /* Pick an appropriate source MAC address + * -- use slave's perm MAC addr, unless used by bond + * -- otherwise, borrow active slave's perm MAC addr + * since that will not be used + */ hwaddr = slave->perm_hwaddr; if (!memcmp(eth_data->h_source, hwaddr, ETH_ALEN)) hwaddr = bond->curr_active_slave->perm_hwaddr; -- cgit v1.2.3 From 9f38c636ababfb41e58c9ec1e9719492ef7f0479 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:59 -0400 Subject: [PATCH] b44: alternate allocation option for DMA descriptors This is a (final?) hack to support the odd DMA allocation requirements of the b44 hardware. The b44 hardware has a 30-bit DMA mask. On x86, anything less than a 32-bit DMA mask forces allocations into the 16MB GFP_DMA range. The memory there is somewhat limited, often resulting in an inability to initialize the b44 driver. This hack uses streaming DMA allocation APIs in order to provide an alternative in case the GFP_DMA allocation fails. It is somewhat ugly, but not much worse than the similar existing hacks to support SKB allocations in the same driver. FWIW, I have received positive feedback on this from several Fedora users. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 134 ++++++++++++++++++++++++++++++++++++++++++++++++++---- drivers/net/b44.h | 2 + 2 files changed, 128 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index d27e870e59ab..282ebd15f011 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -106,6 +106,29 @@ static int b44_poll(struct net_device *dev, int *budget); static void b44_poll_controller(struct net_device *dev); #endif +static int dma_desc_align_mask; +static int dma_desc_sync_size; + +static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev, + dma_addr_t dma_base, + unsigned long offset, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_device(&pdev->dev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); +} + +static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev, + dma_addr_t dma_base, + unsigned long offset, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_cpu(&pdev->dev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); +} + static inline unsigned long br32(const struct b44 *bp, unsigned long reg) { return readl(bp->regs + reg); @@ -668,6 +691,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dp->ctrl = cpu_to_le32(ctrl); dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset); + if (bp->flags & B44_FLAG_RX_RING_HACK) + b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, + dest_idx * sizeof(dp), + DMA_BIDIRECTIONAL); + return RX_PKT_BUF_SZ; } @@ -692,6 +720,11 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) pci_unmap_addr_set(dest_map, mapping, pci_unmap_addr(src_map, mapping)); + if (bp->flags & B44_FLAG_RX_RING_HACK) + b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma, + src_idx * sizeof(src_desc), + DMA_BIDIRECTIONAL); + ctrl = src_desc->ctrl; if (dest_idx == (B44_RX_RING_SIZE - 1)) ctrl |= cpu_to_le32(DESC_CTRL_EOT); @@ -700,8 +733,14 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dest_desc->ctrl = ctrl; dest_desc->addr = src_desc->addr; + src_map->skb = NULL; + if (bp->flags & B44_FLAG_RX_RING_HACK) + b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, + dest_idx * sizeof(dest_desc), + DMA_BIDIRECTIONAL); + pci_dma_sync_single_for_device(bp->pdev, src_desc->addr, RX_PKT_BUF_SZ, PCI_DMA_FROMDEVICE); @@ -959,6 +998,11 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl); bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset); + if (bp->flags & B44_FLAG_TX_RING_HACK) + b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma, + entry * sizeof(bp->tx_ring[0]), + DMA_TO_DEVICE); + entry = NEXT_TX(entry); bp->tx_prod = entry; @@ -1064,6 +1108,16 @@ static void b44_init_rings(struct b44 *bp) memset(bp->rx_ring, 0, B44_RX_RING_BYTES); memset(bp->tx_ring, 0, B44_TX_RING_BYTES); + if (bp->flags & B44_FLAG_RX_RING_HACK) + dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + PCI_DMA_BIDIRECTIONAL); + + if (bp->flags & B44_FLAG_TX_RING_HACK) + dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + PCI_DMA_TODEVICE); + for (i = 0; i < bp->rx_pending; i++) { if (b44_alloc_rx_skb(bp, -1, i) < 0) break; @@ -1085,14 +1139,28 @@ static void b44_free_consistent(struct b44 *bp) bp->tx_buffers = NULL; } if (bp->rx_ring) { - pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); + if (bp->flags & B44_FLAG_RX_RING_HACK) { + dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); + kfree(bp->rx_ring); + } else + pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, + bp->rx_ring, bp->rx_ring_dma); bp->rx_ring = NULL; + bp->flags &= ~B44_FLAG_RX_RING_HACK; } if (bp->tx_ring) { - pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); + if (bp->flags & B44_FLAG_TX_RING_HACK) { + dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); + kfree(bp->tx_ring); + } else + pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, + bp->tx_ring, bp->tx_ring_dma); bp->tx_ring = NULL; + bp->flags &= ~B44_FLAG_TX_RING_HACK; } } @@ -1118,12 +1186,56 @@ static int b44_alloc_consistent(struct b44 *bp) size = DMA_TABLE_BYTES; bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma); - if (!bp->rx_ring) - goto out_err; + if (!bp->rx_ring) { + /* Allocation may have failed due to pci_alloc_consistent + insisting on use of GFP_DMA, which is more restrictive + than necessary... */ + struct dma_desc *rx_ring; + dma_addr_t rx_ring_dma; + + if (!(rx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL))) + goto out_err; + + memset(rx_ring, 0, size); + rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); + + if (rx_ring_dma + size > B44_DMA_MASK) { + kfree(rx_ring); + goto out_err; + } + + bp->rx_ring = rx_ring; + bp->rx_ring_dma = rx_ring_dma; + bp->flags |= B44_FLAG_RX_RING_HACK; + } bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma); - if (!bp->tx_ring) - goto out_err; + if (!bp->tx_ring) { + /* Allocation may have failed due to pci_alloc_consistent + insisting on use of GFP_DMA, which is more restrictive + than necessary... */ + struct dma_desc *tx_ring; + dma_addr_t tx_ring_dma; + + if (!(tx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL))) + goto out_err; + + memset(tx_ring, 0, size); + tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); + + if (tx_ring_dma + size > B44_DMA_MASK) { + kfree(tx_ring); + goto out_err; + } + + bp->tx_ring = tx_ring; + bp->tx_ring_dma = tx_ring_dma; + bp->flags |= B44_FLAG_TX_RING_HACK; + } return 0; @@ -1973,6 +2085,12 @@ static struct pci_driver b44_driver = { static int __init b44_init(void) { + unsigned int dma_desc_align_size = dma_get_cache_alignment(); + + /* Setup paramaters for syncing RX/TX DMA descriptors */ + dma_desc_align_mask = ~(dma_desc_align_size - 1); + dma_desc_sync_size = max(dma_desc_align_size, sizeof(struct dma_desc)); + return pci_module_init(&b44_driver); } diff --git a/drivers/net/b44.h b/drivers/net/b44.h index 11c40a2e71c7..593cb0ad4100 100644 --- a/drivers/net/b44.h +++ b/drivers/net/b44.h @@ -400,6 +400,8 @@ struct b44 { #define B44_FLAG_ADV_100HALF 0x04000000 #define B44_FLAG_ADV_100FULL 0x08000000 #define B44_FLAG_INTERNAL_PHY 0x10000000 +#define B44_FLAG_RX_RING_HACK 0x20000000 +#define B44_FLAG_TX_RING_HACK 0x40000000 u32 rx_offset; -- cgit v1.2.3 From 36841c9d02870983c2b08c85d56572c1ff011997 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:58 -0400 Subject: [PATCH] orinoco: remove redundance skb length check before padding Checking the skb->len value before calling skb_padto is redundant. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index da4c5e94a959..5db2bbad65c4 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -492,11 +492,9 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) /* Check packet length, pad short packets, round up odd length */ len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN); - if (skb->len < len) { - skb = skb_padto(skb, len); - if (skb == NULL) - goto fail; - } + skb = skb_padto(skb, len); + if (skb == NULL) + goto fail; len -= ETH_HLEN; eh = (struct ethhdr *)skb->data; -- cgit v1.2.3 From 67ec2f805a5260c041b1c3c7a86ecfbc9670db06 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:01 -0400 Subject: [PATCH] sundance: remove if (1) { ... } block in sundance_probe1 Remove an if (1) { ... } block in sundance_probe1. Its purpose seems to be only to allow for delaring some extra local variables. But, it also adds ugly indentation without adding any meaning to the code. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 44 +++++++++++++++++++++----------------------- 1 file changed, 21 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index e148a7212073..8c4eb11ab44e 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -518,6 +518,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, #else int bar = 1; #endif + int phy, phy_idx = 0; /* when built into the kernel, we only print version if device is found */ @@ -606,33 +607,30 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, printk("%2.2x:", dev->dev_addr[i]); printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); - if (1) { - int phy, phy_idx = 0; - np->phys[0] = 1; /* Default setting */ - np->mii_preamble_required++; - for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { - int mii_status = mdio_read(dev, phy, MII_BMSR); - if (mii_status != 0xffff && mii_status != 0x0000) { - np->phys[phy_idx++] = phy; - np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); - if ((mii_status & 0x0040) == 0) - np->mii_preamble_required++; - printk(KERN_INFO "%s: MII PHY found at address %d, status " - "0x%4.4x advertising %4.4x.\n", - dev->name, phy, mii_status, np->mii_if.advertising); - } - } - np->mii_preamble_required--; - - if (phy_idx == 0) { - printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", - dev->name, ioread32(ioaddr + ASICCtrl)); - goto err_out_unregister; + np->phys[0] = 1; /* Default setting */ + np->mii_preamble_required++; + for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { + int mii_status = mdio_read(dev, phy, MII_BMSR); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phy; + np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + if ((mii_status & 0x0040) == 0) + np->mii_preamble_required++; + printk(KERN_INFO "%s: MII PHY found at address %d, status " + "0x%4.4x advertising %4.4x.\n", + dev->name, phy, mii_status, np->mii_if.advertising); } + } + np->mii_preamble_required--; - np->mii_if.phy_id = np->phys[0]; + if (phy_idx == 0) { + printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", + dev->name, ioread32(ioaddr + ASICCtrl)); + goto err_out_unregister; } + np->mii_if.phy_id = np->phys[0]; + /* Parse override configuration */ np->an_enable = 1; if (card_idx < MAX_UNITS) { -- cgit v1.2.3 From 2aa1d82db7a967b748c4b41854c4222cd0484114 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:02 -0400 Subject: [PATCH] sundance: expand reset mask Expand the mask used when reseting the chip to include the GlobalReset bit. This fix comes from ICPlus and seems to be required for some cards. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 8c4eb11ab44e..d8a7e08cab2b 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -691,7 +691,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, /* Reset the chip to erase previous misconfiguration. */ if (netif_msg_hw(np)) printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); - iowrite16(0x007f, ioaddr + ASICCtrl + 2); + iowrite16(0x00ff, ioaddr + ASICCtrl + 2); if (netif_msg_hw(np)) printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); -- cgit v1.2.3 From c4cfe567b92d5663f98e2f82f28ffc3069fc982f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 15 Oct 2005 00:32:29 -0700 Subject: [PATCH] e1000 build fix Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 18847f9e4d49..40128b9d16ef 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4347,7 +4347,7 @@ e1000_netpoll(struct net_device *netdev) struct e1000_adapter *adapter = netdev_priv(netdev); disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev, NULL); - e1000_clean_tx_irq(adapter); + e1000_clean_tx_irq(adapter, adapter->tx_ring); enable_irq(adapter->pdev->irq); } #endif -- cgit v1.2.3 From ab7a435a01a9995359a72851ff6896dc110c243f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 18 Oct 2005 21:01:29 +0100 Subject: [PATCH] Remove unused header. mkiss.h has been integrated into mkiss.c earlier. Signed-off-by: Ralf Baechle DL5RB drivers/net/hamradio/mkiss.h | 62 ------------------------------------------- 1 files changed, 62 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.h | 62 -------------------------------------------- 1 file changed, 62 deletions(-) delete mode 100644 drivers/net/hamradio/mkiss.h (limited to 'drivers') diff --git a/drivers/net/hamradio/mkiss.h b/drivers/net/hamradio/mkiss.h deleted file mode 100644 index 4ab700478598..000000000000 --- a/drivers/net/hamradio/mkiss.h +++ /dev/null @@ -1,62 +0,0 @@ -/**************************************************************************** - * Defines for the Multi-KISS driver. - ****************************************************************************/ - -#define AX25_MAXDEV 16 /* MAX number of AX25 channels; - This can be overridden with - insmod -oax25_maxdev=nnn */ -#define AX_MTU 236 - -/* SLIP/KISS protocol characters. */ -#define END 0300 /* indicates end of frame */ -#define ESC 0333 /* indicates byte stuffing */ -#define ESC_END 0334 /* ESC ESC_END means END 'data' */ -#define ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ - -struct ax_disp { - int magic; - - /* Various fields. */ - struct tty_struct *tty; /* ptr to TTY structure */ - struct net_device *dev; /* easy for intr handling */ - - /* These are pointers to the malloc()ed frame buffers. */ - unsigned char *rbuff; /* receiver buffer */ - int rcount; /* received chars counter */ - unsigned char *xbuff; /* transmitter buffer */ - unsigned char *xhead; /* pointer to next byte to XMIT */ - int xleft; /* bytes left in XMIT queue */ - - /* SLIP interface statistics. */ - unsigned long rx_packets; /* inbound frames counter */ - unsigned long tx_packets; /* outbound frames counter */ - unsigned long rx_bytes; /* inbound bytes counter */ - unsigned long tx_bytes; /* outbound bytes counter */ - unsigned long rx_errors; /* Parity, etc. errors */ - unsigned long tx_errors; /* Planned stuff */ - unsigned long rx_dropped; /* No memory for skb */ - unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */ - - /* Detailed SLIP statistics. */ - int mtu; /* Our mtu (to spot changes!) */ - int buffsize; /* Max buffers sizes */ - - - unsigned long flags; /* Flag values/ mode etc */ - /* long req'd: used by set_bit --RR */ -#define AXF_INUSE 0 /* Channel in use */ -#define AXF_ESCAPE 1 /* ESC received */ -#define AXF_ERROR 2 /* Parity, etc. error */ -#define AXF_KEEPTEST 3 /* Keepalive test flag */ -#define AXF_OUTWAIT 4 /* is outpacket was flag */ - - int mode; - int crcmode; /* MW: for FlexNet, SMACK etc. */ -#define CRC_MODE_NONE 0 -#define CRC_MODE_FLEX 1 -#define CRC_MODE_SMACK 2 - spinlock_t buflock; /* lock for rbuf and xbuf */ -}; - -#define AX25_MAGIC 0x5316 -- cgit v1.2.3 From 2039973af59889fea0d14362eae56792cfe8d25a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 19 Oct 2005 15:39:05 +0100 Subject: [PATCH] sb1250-mac: Get rid of all the funny SBMAC_WRITECSR and SBMAC_READCSR macros. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 303 ++++++++++++++++++++--------------------------- 1 files changed, 132 insertions(+), 171 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 303 +++++++++++++++++++++-------------------------- 1 file changed, 132 insertions(+), 171 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index cb4ea4158457..f7dda6fabe82 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -118,8 +118,6 @@ MODULE_PARM_DESC(int_timeout, "Timeout value"); ********************************************************************* */ -typedef unsigned long sbmac_port_t; - typedef enum { sbmac_speed_auto, sbmac_speed_10, sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t; @@ -144,10 +142,6 @@ typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, #define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES) -#define SBMAC_READCSR(t) __raw_readq((unsigned long)t) -#define SBMAC_WRITECSR(t,v) __raw_writeq(v, (unsigned long)t) - - #define SBMAC_MAX_TXDESCR 32 #define SBMAC_MAX_RXDESCR 32 @@ -187,11 +181,11 @@ typedef struct sbmacdma_s { int sbdma_int_timeout; /* # usec rx/tx interrupt */ #endif - sbmac_port_t sbdma_config0; /* DMA config register 0 */ - sbmac_port_t sbdma_config1; /* DMA config register 1 */ - sbmac_port_t sbdma_dscrbase; /* Descriptor base address */ - sbmac_port_t sbdma_dscrcnt; /* Descriptor count register */ - sbmac_port_t sbdma_curdscr; /* current descriptor address */ + volatile void __iomem *sbdma_config0; /* DMA config register 0 */ + volatile void __iomem *sbdma_config1; /* DMA config register 1 */ + volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */ + volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */ + volatile void __iomem *sbdma_curdscr; /* current descriptor address */ /* * This stuff is for maintenance of the ring @@ -236,17 +230,17 @@ struct sbmac_softc { * Controller-specific things */ - unsigned long sbm_base; /* MAC's base address */ + volatile void __iomem *sbm_base; /* MAC's base address */ sbmac_state_t sbm_state; /* current state */ - sbmac_port_t sbm_macenable; /* MAC Enable Register */ - sbmac_port_t sbm_maccfg; /* MAC Configuration Register */ - sbmac_port_t sbm_fifocfg; /* FIFO configuration register */ - sbmac_port_t sbm_framecfg; /* Frame configuration register */ - sbmac_port_t sbm_rxfilter; /* receive filter register */ - sbmac_port_t sbm_isr; /* Interrupt status register */ - sbmac_port_t sbm_imr; /* Interrupt mask register */ - sbmac_port_t sbm_mdio; /* MDIO register */ + volatile void __iomem *sbm_macenable; /* MAC Enable Register */ + volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */ + volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */ + volatile void __iomem *sbm_framecfg; /* Frame configuration register */ + volatile void __iomem *sbm_rxfilter; /* receive filter register */ + volatile void __iomem *sbm_isr; /* Interrupt status register */ + volatile void __iomem *sbm_imr; /* Interrupt mask register */ + volatile void __iomem *sbm_mdio; /* MDIO register */ sbmac_speed_t sbm_speed; /* current speed */ sbmac_duplex_t sbm_duplex; /* current duplex */ @@ -467,15 +461,15 @@ static void sbmac_mii_sync(struct sbmac_softc *s) uint64_t bits; int mac_mdio_genc; - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); for (cnt = 0; cnt < 32; cnt++) { - SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); } } @@ -498,10 +492,10 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc unsigned int curmask; int mac_mdio_genc; - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; bits = M_MAC_MDIO_DIR_OUTPUT; - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); curmask = 1 << (bitcnt - 1); @@ -509,9 +503,9 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc if (data & curmask) bits |= M_MAC_MDIO_OUT; else bits &= ~M_MAC_MDIO_OUT; - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); curmask >>= 1; } } @@ -559,33 +553,31 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) sbmac_mii_senddata(s,phyaddr, 5); sbmac_mii_senddata(s,regidx, 5); - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; /* * Switch the port around without a clock transition. */ - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); /* * Send out a clock pulse to signal we want the status */ - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); /* * If an error occurred, the PHY will signal '1' back */ - error = SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN; + error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN; /* * Issue an 'idle' clock pulse, but keep the direction * the same. */ - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); regval = 0; @@ -593,18 +585,16 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) regval <<= 1; if (error == 0) { - if (SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN) + if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN) regval |= 1; } - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); } /* Switch back to output */ - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); if (error == 0) return regval; @@ -641,9 +631,9 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, sbmac_mii_senddata(s,MII_COMMAND_ACK,2); sbmac_mii_senddata(s,regval,16); - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); } @@ -685,48 +675,27 @@ static void sbdma_initctx(sbmacdma_t *d, s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; #endif - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)), 0); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR))); /* * initialize register pointers @@ -814,22 +783,19 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) */ #ifdef CONFIG_SBMAC_COALESCE - SBMAC_WRITECSR(d->sbdma_config1, - V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | - 0); - SBMAC_WRITECSR(d->sbdma_config0, - M_DMA_EOP_INT_EN | + __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | + 0, d->sbdma_config1); + __raw_writeq(M_DMA_EOP_INT_EN | V_DMA_RINGSZ(d->sbdma_maxdescr) | V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) | - 0); + 0, d->sbdma_config0); #else - SBMAC_WRITECSR(d->sbdma_config1,0); - SBMAC_WRITECSR(d->sbdma_config0, - V_DMA_RINGSZ(d->sbdma_maxdescr) | - 0); + __raw_writeq(0, d->sbdma_config1); + __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) | + 0, d->sbdma_config0); #endif - SBMAC_WRITECSR(d->sbdma_dscrbase,d->sbdma_dscrtable_phys); + __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase); /* * Initialize ring pointers @@ -857,18 +823,18 @@ static void sbdma_channel_stop(sbmacdma_t *d) * Turn off the DMA channel */ - SBMAC_WRITECSR(d->sbdma_config1,0); + __raw_writeq(0, d->sbdma_config1); - SBMAC_WRITECSR(d->sbdma_dscrbase,0); + __raw_writeq(0, d->sbdma_dscrbase); - SBMAC_WRITECSR(d->sbdma_config0,0); + __raw_writeq(0, d->sbdma_config0); /* * Zero ring pointers */ - d->sbdma_addptr = 0; - d->sbdma_remptr = 0; + d->sbdma_addptr = NULL; + d->sbdma_remptr = NULL; } static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) @@ -971,8 +937,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * Do not interrupt per DMA transfer. */ dsc->dscr_a = virt_to_phys(sb_new->data) | - V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | - 0; + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0; #else dsc->dscr_a = virt_to_phys(sb_new->data) | V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | @@ -998,7 +963,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * Give the buffer to the DMA engine. */ - SBMAC_WRITECSR(d->sbdma_dscrcnt,1); + __raw_writeq(1, d->sbdma_dscrcnt); return 0; /* we did it */ } @@ -1088,7 +1053,7 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) * Give the buffer to the DMA engine. */ - SBMAC_WRITECSR(d->sbdma_dscrcnt,1); + __raw_writeq(1, d->sbdma_dscrcnt); return 0; /* we did it */ } @@ -1184,7 +1149,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) */ curidx = d->sbdma_remptr - d->sbdma_dscrtable; - hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - + hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); /* @@ -1311,7 +1276,7 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) */ curidx = d->sbdma_remptr - d->sbdma_dscrtable; - hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - + hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); /* @@ -1467,7 +1432,7 @@ static void sbmac_uninitctx(struct sbmac_softc *sc) static void sbmac_channel_start(struct sbmac_softc *s) { uint64_t reg; - sbmac_port_t port; + volatile void __iomem *port; uint64_t cfg,fifo,framecfg; int idx, th_value; @@ -1482,13 +1447,13 @@ static void sbmac_channel_start(struct sbmac_softc *s) * Bring the controller out of reset, but leave it off. */ - SBMAC_WRITECSR(s->sbm_macenable,0); + __raw_writeq(0, s->sbm_macenable); /* * Ignore all received packets */ - SBMAC_WRITECSR(s->sbm_rxfilter,0); + __raw_writeq(0, s->sbm_rxfilter); /* * Calculate values for various control registers. @@ -1532,7 +1497,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) port = s->sbm_base + R_MAC_HASH_BASE; for (idx = 0; idx < MAC_HASH_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } @@ -1542,7 +1507,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) port = s->sbm_base + R_MAC_ADDR_BASE; for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } @@ -1552,14 +1517,14 @@ static void sbmac_channel_start(struct sbmac_softc *s) port = s->sbm_base + R_MAC_CHUP0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } port = s->sbm_base + R_MAC_CHLO0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } @@ -1571,7 +1536,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) reg = sbmac_addr2reg(s->sbm_hwaddr); port = s->sbm_base + R_MAC_ADDR_BASE; - SBMAC_WRITECSR(port,reg); + __raw_writeq(reg, port); port = s->sbm_base + R_MAC_ETHERNET_ADDR; #ifdef CONFIG_SB1_PASS_1_WORKAROUNDS @@ -1580,9 +1545,9 @@ static void sbmac_channel_start(struct sbmac_softc *s) * destination address in the R_MAC_ETHERNET_ADDR register. * Set the value to zero. */ - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); #else - SBMAC_WRITECSR(port,reg); + __raw_writeq(reg, port); #endif /* @@ -1590,11 +1555,11 @@ static void sbmac_channel_start(struct sbmac_softc *s) * to the various config registers */ - SBMAC_WRITECSR(s->sbm_rxfilter,0); - SBMAC_WRITECSR(s->sbm_imr,0); - SBMAC_WRITECSR(s->sbm_framecfg,framecfg); - SBMAC_WRITECSR(s->sbm_fifocfg,fifo); - SBMAC_WRITECSR(s->sbm_maccfg,cfg); + __raw_writeq(0, s->sbm_rxfilter); + __raw_writeq(0, s->sbm_imr); + __raw_writeq(framecfg, s->sbm_framecfg); + __raw_writeq(fifo, s->sbm_fifocfg); + __raw_writeq(cfg, s->sbm_maccfg); /* * Initialize DMA channels (rings should be ok now) @@ -1620,11 +1585,10 @@ static void sbmac_channel_start(struct sbmac_softc *s) * Turn on the rest of the bits in the enable register */ - SBMAC_WRITECSR(s->sbm_macenable, - M_MAC_RXDMA_EN0 | + __raw_writeq(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 | M_MAC_RX_ENABLE | - M_MAC_TX_ENABLE); + M_MAC_TX_ENABLE, s->sbm_macenable); @@ -1633,23 +1597,21 @@ static void sbmac_channel_start(struct sbmac_softc *s) /* * Accept any TX interrupt and EOP count/timer RX interrupts on ch 0 */ - SBMAC_WRITECSR(s->sbm_imr, - ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | - ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0)); + __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | + ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr); #else /* * Accept any kind of interrupt on TX and RX DMA channel 0 */ - SBMAC_WRITECSR(s->sbm_imr, - (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | - (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)); + __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | + (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); #endif /* * Enable receiving unicasts and broadcasts */ - SBMAC_WRITECSR(s->sbm_rxfilter,M_MAC_UCAST_EN | M_MAC_BCAST_EN); + __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); /* * we're running now. @@ -1695,8 +1657,8 @@ static void sbmac_channel_stop(struct sbmac_softc *s) /* don't accept any packets, disable all interrupts */ - SBMAC_WRITECSR(s->sbm_rxfilter,0); - SBMAC_WRITECSR(s->sbm_imr,0); + __raw_writeq(0, s->sbm_rxfilter); + __raw_writeq(0, s->sbm_imr); /* Turn off ticker */ @@ -1704,7 +1666,7 @@ static void sbmac_channel_stop(struct sbmac_softc *s) /* turn off receiver and transmitter */ - SBMAC_WRITECSR(s->sbm_macenable,0); + __raw_writeq(0, s->sbm_macenable); /* We're stopped now. */ @@ -1788,14 +1750,14 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) return; if (onoff) { - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_ALLPKT_EN; - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); } else { - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_ALLPKT_EN; - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); } } @@ -1816,9 +1778,9 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) uint64_t reg; /* Hard code the off set to 15 for now */ - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); /* read system identification to determine revision */ if (periph_rev >= 2) { @@ -1897,8 +1859,8 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) * Read current register values */ - cfg = SBMAC_READCSR(s->sbm_maccfg); - framecfg = SBMAC_READCSR(s->sbm_framecfg); + cfg = __raw_readq(s->sbm_maccfg); + framecfg = __raw_readq(s->sbm_framecfg); /* * Mask out the stuff we want to change @@ -1947,8 +1909,8 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) * Send the bits back to the hardware */ - SBMAC_WRITECSR(s->sbm_framecfg,framecfg); - SBMAC_WRITECSR(s->sbm_maccfg,cfg); + __raw_writeq(framecfg, s->sbm_framecfg); + __raw_writeq(cfg, s->sbm_maccfg); return 1; } @@ -1987,7 +1949,7 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc * Read current register values */ - cfg = SBMAC_READCSR(s->sbm_maccfg); + cfg = __raw_readq(s->sbm_maccfg); /* * Mask off the stuff we're about to change @@ -2046,7 +2008,7 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc * Send the bits back to the hardware */ - SBMAC_WRITECSR(s->sbm_maccfg,cfg); + __raw_writeq(cfg, s->sbm_maccfg); return 1; } @@ -2079,7 +2041,7 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) * register, except for counter addr) */ - isr = SBMAC_READCSR(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; + isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; if (isr == 0) break; @@ -2180,7 +2142,7 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) static void sbmac_setmulti(struct sbmac_softc *sc) { uint64_t reg; - sbmac_port_t port; + volatile void __iomem *port; int idx; struct dev_mc_list *mclist; struct net_device *dev = sc->sbm_dev; @@ -2193,30 +2155,30 @@ static void sbmac_setmulti(struct sbmac_softc *sc) for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); } for (idx = 0; idx < MAC_HASH_COUNT; idx++) { port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); } /* * Clear the filter to say we don't want any multicasts. */ - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); if (dev->flags & IFF_ALLMULTI) { /* * Enable ALL multicasts. Do this by inverting the * multicast enable bit. */ - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); return; } @@ -2235,7 +2197,7 @@ static void sbmac_setmulti(struct sbmac_softc *sc) while (mclist && (idx < MAC_ADDR_COUNT)) { reg = sbmac_addr2reg(mclist->dmi_addr); port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t)); - SBMAC_WRITECSR(port,reg); + __raw_writeq(reg, port); idx++; mclist = mclist->next; } @@ -2246,9 +2208,9 @@ static void sbmac_setmulti(struct sbmac_softc *sc) */ if (idx > 1) { - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_MCAST_EN; - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); } } @@ -2377,8 +2339,8 @@ static int sbmac_init(struct net_device *dev, int idx) * for us in the ethernet address register for each mac. */ - ea_reg = SBMAC_READCSR(sc->sbm_base + R_MAC_ETHERNET_ADDR); - SBMAC_WRITECSR(sc->sbm_base + R_MAC_ETHERNET_ADDR, 0); + ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); + __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); for (i = 0; i < 6; i++) { eaddr[i] = (uint8_t) (ea_reg & 0xFF); ea_reg >>= 8; @@ -2465,7 +2427,7 @@ static int sbmac_open(struct net_device *dev) * yet) */ - SBMAC_READCSR(sc->sbm_isr); + __raw_readq(sc->sbm_isr); if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev)) return -EBUSY; @@ -2800,13 +2762,13 @@ sbmac_setup_hwaddr(int chan,char *addr) { uint8_t eaddr[6]; uint64_t val; - sbmac_port_t port; + unsigned long port; port = A_MAC_CHANNEL_BASE(chan); sbmac_parse_hwaddr(addr,eaddr); val = sbmac_addr2reg(eaddr); - SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),val); - val = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR)); + __raw_writeq(val, IOADDR(port+R_MAC_ETHERNET_ADDR)); + val = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR)); } #endif @@ -2817,7 +2779,7 @@ sbmac_init_module(void) { int idx; struct net_device *dev; - sbmac_port_t port; + unsigned long port; int chip_max_units; /* @@ -2871,7 +2833,7 @@ sbmac_init_module(void) * If we find a zero, skip this MAC. */ - sbmac_orig_hwaddr[idx] = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR)); + sbmac_orig_hwaddr[idx] = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR)); if (sbmac_orig_hwaddr[idx] == 0) { printk(KERN_DEBUG "sbmac: not configuring MAC at " "%lx\n", port); @@ -2893,8 +2855,7 @@ sbmac_init_module(void) dev->mem_end = 0; if (sbmac_init(dev, idx)) { port = A_MAC_CHANNEL_BASE(idx); - SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR), - sbmac_orig_hwaddr[idx]); + __raw_writeq(sbmac_orig_hwaddr[idx], IOADDR(port+R_MAC_ETHERNET_ADDR)); free_netdev(dev); continue; } -- cgit v1.2.3 From 74b0247fbd4b6ed1693a420d85cf50267d840ef4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 19 Oct 2005 15:40:02 +0100 Subject: [PATCH] sb1250-mac: Whitespace cleanup. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++++++------------------------ 1 files changed, 515 insertions(+), 515 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++++++----------------------- 1 file changed, 515 insertions(+), 515 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index f7dda6fabe82..d4c8ecdfa4a7 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -10,7 +10,7 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. @@ -127,7 +127,7 @@ typedef enum { sbmac_duplex_auto, sbmac_duplex_half, typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame, sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t; -typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, +typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, sbmac_state_broken } sbmac_state_t; @@ -147,8 +147,8 @@ typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, #define ETHER_ALIGN 2 #define ETHER_ADDR_LEN 6 -#define ENET_PACKET_SIZE 1518 -/*#define ENET_PACKET_SIZE 9216 */ +#define ENET_PACKET_SIZE 1518 +/*#define ENET_PACKET_SIZE 9216 */ /********************************************************************** * DMA Descriptor structure @@ -166,12 +166,12 @@ typedef unsigned long paddr_t; ********************************************************************* */ typedef struct sbmacdma_s { - - /* + + /* * This stuff is used to identify the channel and the registers * associated with it. */ - + struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */ int sbdma_channel; /* channel number */ int sbdma_txdir; /* direction (1=transmit) */ @@ -186,16 +186,16 @@ typedef struct sbmacdma_s { volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */ volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */ volatile void __iomem *sbdma_curdscr; /* current descriptor address */ - + /* * This stuff is for maintenance of the ring */ - + sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */ sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */ - + struct sk_buff **sbdma_ctxtable; /* context table, one per descr */ - + paddr_t sbdma_dscrtable_phys; /* and also the phys addr */ sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */ sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */ @@ -207,15 +207,15 @@ typedef struct sbmacdma_s { ********************************************************************* */ struct sbmac_softc { - + /* * Linux-specific things */ - + struct net_device *sbm_dev; /* pointer to linux device */ spinlock_t sbm_lock; /* spin lock */ struct timer_list sbm_timer; /* for monitoring MII */ - struct net_device_stats sbm_stats; + struct net_device_stats sbm_stats; int sbm_devflags; /* current device flags */ int sbm_phy_oldbmsr; @@ -223,16 +223,16 @@ struct sbmac_softc { int sbm_phy_oldk1stsr; int sbm_phy_oldlinkstat; int sbm_buffersize; - + unsigned char sbm_phys[2]; - + /* * Controller-specific things */ - + volatile void __iomem *sbm_base; /* MAC's base address */ sbmac_state_t sbm_state; /* current state */ - + volatile void __iomem *sbm_macenable; /* MAC Enable Register */ volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */ volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */ @@ -241,13 +241,13 @@ struct sbmac_softc { volatile void __iomem *sbm_isr; /* Interrupt status register */ volatile void __iomem *sbm_imr; /* Interrupt mask register */ volatile void __iomem *sbm_mdio; /* MDIO register */ - + sbmac_speed_t sbm_speed; /* current speed */ sbmac_duplex_t sbm_duplex; /* current duplex */ sbmac_fc_t sbm_fc; /* current flow control setting */ - + unsigned char sbm_hwaddr[ETHER_ADDR_LEN]; - + sbmacdma_t sbm_txdma; /* for now, only use channel 0 */ sbmacdma_t sbm_rxdma; int rx_hw_checksum; @@ -444,13 +444,13 @@ static uint64_t sbmac_orig_hwaddr[MAX_UNITS]; /********************************************************************** * SBMAC_MII_SYNC(s) - * + * * Synchronize with the MII - send a pattern of bits to the MII * that will guarantee that it is ready to accept a command. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -462,11 +462,11 @@ static void sbmac_mii_sync(struct sbmac_softc *s) int mac_mdio_genc; mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - + bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; - + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); - + for (cnt = 0; cnt < 32; cnt++) { __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); @@ -475,11 +475,11 @@ static void sbmac_mii_sync(struct sbmac_softc *s) /********************************************************************** * SBMAC_MII_SENDDATA(s,data,bitcnt) - * + * * Send some bits to the MII. The bits to be sent are right- * justified in the 'data' parameter. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * data - data to send * bitcnt - number of bits to send @@ -493,12 +493,12 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc int mac_mdio_genc; mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - + bits = M_MAC_MDIO_DIR_OUTPUT; __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); - + curmask = 1 << (bitcnt - 1); - + for (i = 0; i < bitcnt; i++) { if (data & curmask) bits |= M_MAC_MDIO_OUT; @@ -514,14 +514,14 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc /********************************************************************** * SBMAC_MII_READ(s,phyaddr,regidx) - * + * * Read a PHY register. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * phyaddr - PHY's address * regidx = index of register to read - * + * * Return value: * value read, or 0 if an error occurred. ********************************************************************* */ @@ -537,9 +537,9 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) * Synchronize ourselves so that the PHY knows the next * thing coming down is a command */ - + sbmac_mii_sync(s); - + /* * Send the data to the PHY. The sequence is * a "start" command (2 bits) @@ -547,55 +547,55 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) * the PHY addr (5 bits) * the register index (5 bits) */ - + sbmac_mii_senddata(s,MII_COMMAND_START, 2); sbmac_mii_senddata(s,MII_COMMAND_READ, 2); sbmac_mii_senddata(s,phyaddr, 5); sbmac_mii_senddata(s,regidx, 5); - + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - - /* + + /* * Switch the port around without a clock transition. */ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - + /* * Send out a clock pulse to signal we want the status */ - + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - - /* + + /* * If an error occurred, the PHY will signal '1' back */ error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN; - - /* + + /* * Issue an 'idle' clock pulse, but keep the direction * the same. */ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - + regval = 0; - + for (idx = 0; idx < 16; idx++) { regval <<= 1; - + if (error == 0) { if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN) regval |= 1; } - + __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); } - + /* Switch back to output */ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); - + if (error == 0) return regval; return 0; @@ -604,15 +604,15 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) /********************************************************************** * SBMAC_MII_WRITE(s,phyaddr,regidx,regval) - * + * * Write a value to a PHY register. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * phyaddr - PHY to use * regidx - register within the PHY * regval - data to write to register - * + * * Return value: * nothing ********************************************************************* */ @@ -623,7 +623,7 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, int mac_mdio_genc; sbmac_mii_sync(s); - + sbmac_mii_senddata(s,MII_COMMAND_START,2); sbmac_mii_senddata(s,MII_COMMAND_WRITE,2); sbmac_mii_senddata(s,phyaddr, 5); @@ -640,18 +640,18 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, /********************************************************************** * SBDMA_INITCTX(d,s,chan,txrx,maxdescr) - * + * * Initialize a DMA channel context. Since there are potentially * eight DMA channels per MAC, it's nice to do this in a standard - * way. - * - * Input parameters: + * way. + * + * Input parameters: * d - sbmacdma_t structure (DMA channel context) * s - sbmac_softc structure (pointer to a MAC) * chan - channel number (0..1 right now) * txrx - Identifies DMA_TX or DMA_RX for channel direction * maxdescr - number of descriptors - * + * * Return value: * nothing ********************************************************************* */ @@ -662,14 +662,14 @@ static void sbdma_initctx(sbmacdma_t *d, int txrx, int maxdescr) { - /* - * Save away interesting stuff in the structure + /* + * Save away interesting stuff in the structure */ - + d->sbdma_eth = s; d->sbdma_channel = chan; d->sbdma_txdir = txrx; - + #if 0 /* RMON clearing */ s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; @@ -697,28 +697,28 @@ static void sbdma_initctx(sbmacdma_t *d, __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR))); __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR))); - /* - * initialize register pointers + /* + * initialize register pointers */ - - d->sbdma_config0 = + + d->sbdma_config0 = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0); - d->sbdma_config1 = + d->sbdma_config1 = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1); - d->sbdma_dscrbase = + d->sbdma_dscrbase = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE); - d->sbdma_dscrcnt = + d->sbdma_dscrcnt = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT); - d->sbdma_curdscr = + d->sbdma_curdscr = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR); - + /* * Allocate memory for the ring */ - + d->sbdma_maxdescr = maxdescr; - - d->sbdma_dscrtable = (sbdmadscr_t *) + + d->sbdma_dscrtable = (sbdmadscr_t *) kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL); /* @@ -727,22 +727,22 @@ static void sbdma_initctx(sbmacdma_t *d, */ d->sbdma_dscrtable = (sbdmadscr_t *) ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t)); - + memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t)); - + d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr; - + d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable); - + /* * And context table */ - - d->sbdma_ctxtable = (struct sk_buff **) + + d->sbdma_ctxtable = (struct sk_buff **) kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL); - + memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *)); - + #ifdef CONFIG_SBMAC_COALESCE /* * Setup Rx/Tx DMA coalescing defaults @@ -753,7 +753,7 @@ static void sbdma_initctx(sbmacdma_t *d, } else { d->sbdma_int_pktcnt = 1; } - + if ( int_timeout ) { d->sbdma_int_timeout = int_timeout; } else { @@ -765,13 +765,13 @@ static void sbdma_initctx(sbmacdma_t *d, /********************************************************************** * SBDMA_CHANNEL_START(d) - * + * * Initialize the hardware registers for a DMA channel. - * - * Input parameters: + * + * Input parameters: * d - DMA channel to init (context must be previously init'd * rxtx - DMA_RX or DMA_TX depending on what type of channel - * + * * Return value: * nothing ********************************************************************* */ @@ -781,7 +781,7 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) /* * Turn on the DMA channel */ - + #ifdef CONFIG_SBMAC_COALESCE __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | 0, d->sbdma_config1); @@ -807,12 +807,12 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) /********************************************************************** * SBDMA_CHANNEL_STOP(d) - * + * * Initialize the hardware registers for a DMA channel. - * - * Input parameters: + * + * Input parameters: * d - DMA channel to init (context must be previously init'd - * + * * Return value: * nothing ********************************************************************* */ @@ -822,17 +822,17 @@ static void sbdma_channel_stop(sbmacdma_t *d) /* * Turn off the DMA channel */ - + __raw_writeq(0, d->sbdma_config1); - + __raw_writeq(0, d->sbdma_dscrbase); - + __raw_writeq(0, d->sbdma_config0); - + /* * Zero ring pointers */ - + d->sbdma_addptr = NULL; d->sbdma_remptr = NULL; } @@ -841,25 +841,25 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) { unsigned long addr; unsigned long newaddr; - + addr = (unsigned long) skb->data; - + newaddr = (addr + power2 - 1) & ~(power2 - 1); - + skb_reserve(skb,newaddr-addr+offset); } /********************************************************************** * SBDMA_ADD_RCVBUFFER(d,sb) - * + * * Add a buffer to the specified DMA channel. For receive channels, * this queues a buffer for inbound packets. - * - * Input parameters: + * + * Input parameters: * d - DMA channel descriptor * sb - sk_buff to add, or NULL if we should allocate one - * + * * Return value: * 0 if buffer could not be added (ring is full) * 1 if buffer added successfully @@ -872,24 +872,24 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) sbdmadscr_t *nextdsc; struct sk_buff *sb_new = NULL; int pktsize = ENET_PACKET_SIZE; - + /* get pointer to our current place in the ring */ - + dsc = d->sbdma_addptr; nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); - + /* * figure out if the ring is full - if the next descriptor * is the same as the one that we're going to remove from * the ring, the ring is full */ - + if (nextdsc == d->sbdma_remptr) { return -ENOSPC; } - /* - * Allocate a sk_buff if we don't already have one. + /* + * Allocate a sk_buff if we don't already have one. * If we do have an sk_buff, reset it so that it's empty. * * Note: sk_buffs don't seem to be guaranteed to have any sort @@ -898,7 +898,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * * 1. the data does not start in the middle of a cache line. * 2. The data does not end in the middle of a cache line - * 3. The buffer can be aligned such that the IP addresses are + * 3. The buffer can be aligned such that the IP addresses are * naturally aligned. * * Remember, the SOCs MAC writes whole cache lines at a time, @@ -906,7 +906,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * data portion starts in the middle of a cache line, the SOC * DMA will trash the beginning (and ending) portions. */ - + if (sb == NULL) { sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN); if (sb_new == NULL) { @@ -922,16 +922,16 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) } else { sb_new = sb; - /* + /* * nothing special to reinit buffer, it's already aligned * and sb->data already points to a good place. */ } - + /* - * fill in the descriptor + * fill in the descriptor */ - + #ifdef CONFIG_SBMAC_COALESCE /* * Do not interrupt per DMA transfer. @@ -946,38 +946,38 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) /* receiving: no options */ dsc->dscr_b = 0; - + /* - * fill in the context + * fill in the context */ - + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new; - - /* - * point at next packet + + /* + * point at next packet */ - + d->sbdma_addptr = nextdsc; - - /* + + /* * Give the buffer to the DMA engine. */ - + __raw_writeq(1, d->sbdma_dscrcnt); - + return 0; /* we did it */ } /********************************************************************** * SBDMA_ADD_TXBUFFER(d,sb) - * + * * Add a transmit buffer to the specified DMA channel, causing a * transmit to start. - * - * Input parameters: + * + * Input parameters: * d - DMA channel descriptor * sb - sk_buff to add - * + * * Return value: * 0 transmit queued successfully * otherwise error code @@ -991,70 +991,70 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) uint64_t phys; uint64_t ncb; int length; - + /* get pointer to our current place in the ring */ - + dsc = d->sbdma_addptr; nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); - + /* * figure out if the ring is full - if the next descriptor * is the same as the one that we're going to remove from * the ring, the ring is full */ - + if (nextdsc == d->sbdma_remptr) { return -ENOSPC; } - + /* * Under Linux, it's not necessary to copy/coalesce buffers * like it is on NetBSD. We think they're all contiguous, * but that may not be true for GBE. */ - + length = sb->len; - + /* * fill in the descriptor. Note that the number of cache * blocks in the descriptor is the number of blocks * *spanned*, so we need to add in the offset (if any) * while doing the calculation. */ - + phys = virt_to_phys(sb->data); ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1))); - dsc->dscr_a = phys | + dsc->dscr_a = phys | V_DMA_DSCRA_A_SIZE(ncb) | #ifndef CONFIG_SBMAC_COALESCE M_DMA_DSCRA_INTERRUPT | #endif M_DMA_ETHTX_SOP; - + /* transmitting: set outbound options and length */ dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | V_DMA_DSCRB_PKT_SIZE(length); - + /* - * fill in the context + * fill in the context */ - + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb; - - /* - * point at next packet + + /* + * point at next packet */ - + d->sbdma_addptr = nextdsc; - - /* + + /* * Give the buffer to the DMA engine. */ - + __raw_writeq(1, d->sbdma_dscrcnt); - + return 0; /* we did it */ } @@ -1063,12 +1063,12 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) /********************************************************************** * SBDMA_EMPTYRING(d) - * + * * Free all allocated sk_buffs on the specified DMA channel; - * - * Input parameters: + * + * Input parameters: * d - DMA channel - * + * * Return value: * nothing ********************************************************************* */ @@ -1077,7 +1077,7 @@ static void sbdma_emptyring(sbmacdma_t *d) { int idx; struct sk_buff *sb; - + for (idx = 0; idx < d->sbdma_maxdescr; idx++) { sb = d->sbdma_ctxtable[idx]; if (sb) { @@ -1090,13 +1090,13 @@ static void sbdma_emptyring(sbmacdma_t *d) /********************************************************************** * SBDMA_FILLRING(d) - * + * * Fill the specified DMA channel (must be receive channel) * with sk_buffs - * - * Input parameters: + * + * Input parameters: * d - DMA channel - * + * * Return value: * nothing ********************************************************************* */ @@ -1104,7 +1104,7 @@ static void sbdma_emptyring(sbmacdma_t *d) static void sbdma_fillring(sbmacdma_t *d) { int idx; - + for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) { if (sbdma_add_rcvbuffer(d,NULL) != 0) break; @@ -1114,16 +1114,16 @@ static void sbdma_fillring(sbmacdma_t *d) /********************************************************************** * SBDMA_RX_PROCESS(sc,d) - * - * Process "completed" receive buffers on the specified DMA channel. + * + * Process "completed" receive buffers on the specified DMA channel. * Note that this isn't really ideal for priority channels, since - * it processes all of the packets on a given channel before - * returning. + * it processes all of the packets on a given channel before + * returning. * - * Input parameters: + * Input parameters: * sc - softc structure * d - DMA channel context - * + * * Return value: * nothing ********************************************************************* */ @@ -1135,56 +1135,56 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sbdmadscr_t *dsc; struct sk_buff *sb; int len; - + for (;;) { - /* + /* * figure out where we are (as an index) and where * the hardware is (also as an index) * - * This could be done faster if (for example) the + * This could be done faster if (for example) the * descriptor table was page-aligned and contiguous in * both virtual and physical memory -- you could then * just compare the low-order bits of the virtual address * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) */ - + curidx = d->sbdma_remptr - d->sbdma_dscrtable; hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); - + /* * If they're the same, that means we've processed all * of the descriptors up to (but not including) the one that * the hardware is working on right now. */ - + if (curidx == hwidx) break; - + /* * Otherwise, get the packet's sk_buff ptr back */ - + dsc = &(d->sbdma_dscrtable[curidx]); sb = d->sbdma_ctxtable[curidx]; d->sbdma_ctxtable[curidx] = NULL; - + len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4; - + /* * Check packet status. If good, process it. * If not, silently drop it and put it back on the * receive ring. */ - + if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) { - + /* * Add a new buffer to replace the old one. If we fail * to allocate a buffer, we're going to drop this * packet and put it right back on the receive ring. */ - + if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) { sc->sbm_stats.rx_dropped++; sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */ @@ -1193,7 +1193,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) * Set length into the packet */ skb_put(sb,len); - + /* * Buffer has been replaced on the * receive ring. Pass the buffer to @@ -1212,7 +1212,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sb->ip_summed = CHECKSUM_NONE; } } - + netif_rx(sb); } } else { @@ -1223,14 +1223,14 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sc->sbm_stats.rx_errors++; sbdma_add_rcvbuffer(d,sb); } - - - /* + + + /* * .. and advance to the next buffer. */ - + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); - + } } @@ -1238,17 +1238,17 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) /********************************************************************** * SBDMA_TX_PROCESS(sc,d) - * - * Process "completed" transmit buffers on the specified DMA channel. + * + * Process "completed" transmit buffers on the specified DMA channel. * This is normally called within the interrupt service routine. * Note that this isn't really ideal for priority channels, since - * it processes all of the packets on a given channel before - * returning. + * it processes all of the packets on a given channel before + * returning. * - * Input parameters: + * Input parameters: * sc - softc structure * d - DMA channel context - * + * * Return value: * nothing ********************************************************************* */ @@ -1262,19 +1262,19 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) unsigned long flags; spin_lock_irqsave(&(sc->sbm_lock), flags); - + for (;;) { - /* + /* * figure out where we are (as an index) and where * the hardware is (also as an index) * - * This could be done faster if (for example) the + * This could be done faster if (for example) the * descriptor table was page-aligned and contiguous in * both virtual and physical memory -- you could then * just compare the low-order bits of the virtual address * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) */ - + curidx = d->sbdma_remptr - d->sbdma_dscrtable; hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); @@ -1284,75 +1284,75 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) * of the descriptors up to (but not including) the one that * the hardware is working on right now. */ - + if (curidx == hwidx) break; - + /* * Otherwise, get the packet's sk_buff ptr back */ - + dsc = &(d->sbdma_dscrtable[curidx]); sb = d->sbdma_ctxtable[curidx]; d->sbdma_ctxtable[curidx] = NULL; - + /* * Stats */ - + sc->sbm_stats.tx_bytes += sb->len; sc->sbm_stats.tx_packets++; - + /* * for transmits, we just free buffers. */ - + dev_kfree_skb_irq(sb); - - /* + + /* * .. and advance to the next buffer. */ d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); - + } - + /* * Decide if we should wake up the protocol or not. * Other drivers seem to do this when we reach a low * watermark on the transmit queue. */ - + netif_wake_queue(d->sbdma_eth->sbm_dev); - + spin_unlock_irqrestore(&(sc->sbm_lock), flags); - + } /********************************************************************** * SBMAC_INITCTX(s) - * + * * Initialize an Ethernet context structure - this is called * once per MAC on the 1250. Memory is allocated here, so don't * call it again from inside the ioctl routines that bring the * interface up/down - * - * Input parameters: + * + * Input parameters: * s - sbmac context structure - * + * * Return value: * 0 ********************************************************************* */ static int sbmac_initctx(struct sbmac_softc *s) { - - /* - * figure out the addresses of some ports + + /* + * figure out the addresses of some ports */ - + s->sbm_macenable = s->sbm_base + R_MAC_ENABLE; s->sbm_maccfg = s->sbm_base + R_MAC_CFG; s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG; @@ -1369,29 +1369,29 @@ static int sbmac_initctx(struct sbmac_softc *s) s->sbm_phy_oldanlpar = 0; s->sbm_phy_oldk1stsr = 0; s->sbm_phy_oldlinkstat = 0; - + /* * Initialize the DMA channels. Right now, only one per MAC is used * Note: Only do this _once_, as it allocates memory from the kernel! */ - + sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR); sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR); - + /* * initial state is OFF */ - + s->sbm_state = sbmac_state_off; - + /* * Initial speed is (XXX TEMP) 10MBit/s HDX no FC */ - + s->sbm_speed = sbmac_speed_10; s->sbm_duplex = sbmac_duplex_half; s->sbm_fc = sbmac_fc_disabled; - + return 0; } @@ -1402,7 +1402,7 @@ static void sbdma_uninitctx(struct sbmacdma_s *d) kfree(d->sbdma_dscrtable); d->sbdma_dscrtable = NULL; } - + if (d->sbdma_ctxtable) { kfree(d->sbdma_ctxtable); d->sbdma_ctxtable = NULL; @@ -1419,12 +1419,12 @@ static void sbmac_uninitctx(struct sbmac_softc *sc) /********************************************************************** * SBMAC_CHANNEL_START(s) - * + * * Start packet processing on this MAC. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -1435,46 +1435,46 @@ static void sbmac_channel_start(struct sbmac_softc *s) volatile void __iomem *port; uint64_t cfg,fifo,framecfg; int idx, th_value; - + /* * Don't do this if running */ if (s->sbm_state == sbmac_state_on) return; - + /* * Bring the controller out of reset, but leave it off. */ - + __raw_writeq(0, s->sbm_macenable); - + /* * Ignore all received packets */ - + __raw_writeq(0, s->sbm_rxfilter); - - /* + + /* * Calculate values for various control registers. */ - + cfg = M_MAC_RETRY_EN | - M_MAC_TX_HOLD_SOP_EN | + M_MAC_TX_HOLD_SOP_EN | V_MAC_TX_PAUSE_CNT_16K | M_MAC_AP_STAT_EN | M_MAC_FAST_SYNC | M_MAC_SS_EN | 0; - - /* + + /* * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above * Use a larger RD_THRSH for gigabit */ - if (periph_rev >= 2) + if (periph_rev >= 2) th_value = 64; - else + else th_value = 28; fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ @@ -1492,29 +1492,29 @@ static void sbmac_channel_start(struct sbmac_softc *s) V_MAC_BACKOFF_SEL(1); /* - * Clear out the hash address map + * Clear out the hash address map */ - + port = s->sbm_base + R_MAC_HASH_BASE; for (idx = 0; idx < MAC_HASH_COUNT; idx++) { __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Clear out the exact-match table */ - + port = s->sbm_base + R_MAC_ADDR_BASE; for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Clear out the DMA Channel mapping table registers */ - + port = s->sbm_base + R_MAC_CHUP0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { __raw_writeq(0, port); @@ -1527,14 +1527,14 @@ static void sbmac_channel_start(struct sbmac_softc *s) __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Program the hardware address. It goes into the hardware-address * register as well as the first filter register. */ - + reg = sbmac_addr2reg(s->sbm_hwaddr); - + port = s->sbm_base + R_MAC_ADDR_BASE; __raw_writeq(reg, port); port = s->sbm_base + R_MAC_ETHERNET_ADDR; @@ -1549,48 +1549,48 @@ static void sbmac_channel_start(struct sbmac_softc *s) #else __raw_writeq(reg, port); #endif - + /* * Set the receive filter for no packets, and write values * to the various config registers */ - + __raw_writeq(0, s->sbm_rxfilter); __raw_writeq(0, s->sbm_imr); __raw_writeq(framecfg, s->sbm_framecfg); __raw_writeq(fifo, s->sbm_fifocfg); __raw_writeq(cfg, s->sbm_maccfg); - + /* * Initialize DMA channels (rings should be ok now) */ - + sbdma_channel_start(&(s->sbm_rxdma), DMA_RX); sbdma_channel_start(&(s->sbm_txdma), DMA_TX); - + /* * Configure the speed, duplex, and flow control */ sbmac_set_speed(s,s->sbm_speed); sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc); - + /* * Fill the receive ring */ - + sbdma_fillring(&(s->sbm_rxdma)); - - /* + + /* * Turn on the rest of the bits in the enable register - */ - + */ + __raw_writeq(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 | M_MAC_RX_ENABLE | M_MAC_TX_ENABLE, s->sbm_macenable); - - + + #ifdef CONFIG_SBMAC_COALESCE @@ -1606,44 +1606,44 @@ static void sbmac_channel_start(struct sbmac_softc *s) __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); #endif - - /* - * Enable receiving unicasts and broadcasts + + /* + * Enable receiving unicasts and broadcasts */ - + __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); - + /* - * we're running now. + * we're running now. */ - + s->sbm_state = sbmac_state_on; - - /* - * Program multicast addresses + + /* + * Program multicast addresses */ - + sbmac_setmulti(s); - - /* - * If channel was in promiscuous mode before, turn that on + + /* + * If channel was in promiscuous mode before, turn that on */ - + if (s->sbm_devflags & IFF_PROMISC) { sbmac_promiscuous_mode(s,1); } - + } /********************************************************************** * SBMAC_CHANNEL_STOP(s) - * + * * Stop packet processing on this MAC. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -1651,49 +1651,49 @@ static void sbmac_channel_start(struct sbmac_softc *s) static void sbmac_channel_stop(struct sbmac_softc *s) { /* don't do this if already stopped */ - + if (s->sbm_state == sbmac_state_off) return; - + /* don't accept any packets, disable all interrupts */ - + __raw_writeq(0, s->sbm_rxfilter); __raw_writeq(0, s->sbm_imr); - + /* Turn off ticker */ - + /* XXX */ - + /* turn off receiver and transmitter */ - + __raw_writeq(0, s->sbm_macenable); - + /* We're stopped now. */ - + s->sbm_state = sbmac_state_off; - + /* * Stop DMA channels (rings should be ok now) */ - + sbdma_channel_stop(&(s->sbm_rxdma)); sbdma_channel_stop(&(s->sbm_txdma)); - + /* Empty the receive and transmit rings */ - + sbdma_emptyring(&(s->sbm_rxdma)); sbdma_emptyring(&(s->sbm_txdma)); - + } /********************************************************************** * SBMAC_SET_CHANNEL_STATE(state) - * + * * Set the channel's state ON or OFF - * - * Input parameters: + * + * Input parameters: * state - new state - * + * * Return value: * old state ********************************************************************* */ @@ -1701,43 +1701,43 @@ static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc, sbmac_state_t state) { sbmac_state_t oldstate = sc->sbm_state; - + /* * If same as previous state, return */ - + if (state == oldstate) { return oldstate; } - + /* - * If new state is ON, turn channel on + * If new state is ON, turn channel on */ - + if (state == sbmac_state_on) { sbmac_channel_start(sc); } else { sbmac_channel_stop(sc); } - + /* * Return previous state */ - + return oldstate; } /********************************************************************** * SBMAC_PROMISCUOUS_MODE(sc,onoff) - * + * * Turn on or off promiscuous mode - * - * Input parameters: + * + * Input parameters: * sc - softc * onoff - 1 to turn on, 0 to turn off - * + * * Return value: * nothing ********************************************************************* */ @@ -1745,15 +1745,15 @@ static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc, static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) { uint64_t reg; - + if (sc->sbm_state != sbmac_state_on) return; - + if (onoff) { reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_ALLPKT_EN; __raw_writeq(reg, sc->sbm_rxfilter); - } + } else { reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_ALLPKT_EN; @@ -1763,12 +1763,12 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) /********************************************************************** * SBMAC_SETIPHDR_OFFSET(sc,onoff) - * + * * Set the iphdr offset as 15 assuming ethernet encapsulation - * - * Input parameters: + * + * Input parameters: * sc - softc - * + * * Return value: * nothing ********************************************************************* */ @@ -1776,12 +1776,12 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) { uint64_t reg; - + /* Hard code the off set to 15 for now */ reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); __raw_writeq(reg, sc->sbm_rxfilter); - + /* read system identification to determine revision */ if (periph_rev >= 2) { sc->rx_hw_checksum = ENABLE; @@ -1793,13 +1793,13 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) /********************************************************************** * SBMAC_ADDR2REG(ptr) - * + * * Convert six bytes into the 64-bit register value that * we typically write into the SBMAC's address/mcast registers - * - * Input parameters: + * + * Input parameters: * ptr - pointer to 6 bytes - * + * * Return value: * register value ********************************************************************* */ @@ -1807,35 +1807,35 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) static uint64_t sbmac_addr2reg(unsigned char *ptr) { uint64_t reg = 0; - + ptr += 6; - - reg |= (uint64_t) *(--ptr); + + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); - + reg |= (uint64_t) *(--ptr); + return reg; } /********************************************************************** * SBMAC_SET_SPEED(s,speed) - * + * * Configure LAN speed for the specified MAC. * Warning: must be called when MAC is off! - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * speed - speed to set MAC to (see sbmac_speed_t enum) - * + * * Return value: * 1 if successful * 0 indicates invalid parameters @@ -1849,31 +1849,31 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) /* * Save new current values */ - + s->sbm_speed = speed; - + if (s->sbm_state == sbmac_state_on) return 0; /* save for next restart */ /* - * Read current register values + * Read current register values */ - + cfg = __raw_readq(s->sbm_maccfg); framecfg = __raw_readq(s->sbm_framecfg); - + /* * Mask out the stuff we want to change */ - + cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | M_MAC_SLOT_SIZE); - + /* * Now add in the new bits */ - + switch (speed) { case sbmac_speed_10: framecfg |= V_MAC_IFG_RX_10 | @@ -1882,7 +1882,7 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_10; cfg |= V_MAC_SPEED_SEL_10MBPS; break; - + case sbmac_speed_100: framecfg |= V_MAC_IFG_RX_100 | V_MAC_IFG_TX_100 | @@ -1890,7 +1890,7 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_100; cfg |= V_MAC_SPEED_SEL_100MBPS ; break; - + case sbmac_speed_1000: framecfg |= V_MAC_IFG_RX_1000 | V_MAC_IFG_TX_1000 | @@ -1898,34 +1898,34 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_1000; cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; break; - + case sbmac_speed_auto: /* XXX not implemented */ /* fall through */ default: return 0; } - + /* - * Send the bits back to the hardware + * Send the bits back to the hardware */ - + __raw_writeq(framecfg, s->sbm_framecfg); __raw_writeq(cfg, s->sbm_maccfg); - + return 1; } /********************************************************************** * SBMAC_SET_DUPLEX(s,duplex,fc) - * + * * Set Ethernet duplex and flow control options for this MAC * Warning: must be called when MAC is off! - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * duplex - duplex setting (see sbmac_duplex_t) * fc - flow control setting (see sbmac_fc_t) - * + * * Return value: * 1 if ok * 0 if an invalid parameter combination was specified @@ -1934,67 +1934,67 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc) { uint64_t cfg; - + /* * Save new current values */ - + s->sbm_duplex = duplex; s->sbm_fc = fc; - + if (s->sbm_state == sbmac_state_on) return 0; /* save for next restart */ - + /* - * Read current register values + * Read current register values */ - + cfg = __raw_readq(s->sbm_maccfg); - + /* * Mask off the stuff we're about to change */ - + cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); - - + + switch (duplex) { case sbmac_duplex_half: switch (fc) { case sbmac_fc_disabled: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; break; - + case sbmac_fc_collision: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; break; - + case sbmac_fc_carrier: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; break; - + case sbmac_fc_auto: /* XXX not implemented */ - /* fall through */ + /* fall through */ case sbmac_fc_frame: /* not valid in half duplex */ default: /* invalid selection */ return 0; } break; - + case sbmac_duplex_full: switch (fc) { case sbmac_fc_disabled: cfg |= V_MAC_FC_CMD_DISABLED; break; - + case sbmac_fc_frame: cfg |= V_MAC_FC_CMD_ENABLED; break; - + case sbmac_fc_collision: /* not valid in full duplex */ case sbmac_fc_carrier: /* not valid in full duplex */ case sbmac_fc_auto: /* XXX not implemented */ - /* fall through */ + /* fall through */ default: return 0; } @@ -2003,13 +2003,13 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc /* XXX not implemented */ break; } - + /* - * Send the bits back to the hardware + * Send the bits back to the hardware */ - + __raw_writeq(cfg, s->sbm_maccfg); - + return 1; } @@ -2018,12 +2018,12 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc /********************************************************************** * SBMAC_INTR() - * + * * Interrupt handler for MAC interrupts - * - * Input parameters: + * + * Input parameters: * MAC structure - * + * * Return value: * nothing ********************************************************************* */ @@ -2035,27 +2035,27 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) int handled = 0; for (;;) { - + /* * Read the ISR (this clears the bits in the real * register, except for counter addr) */ - + isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; - + if (isr == 0) break; handled = 1; - + /* * Transmits on channel 0 */ - + if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) { sbdma_tx_process(sc,&(sc->sbm_txdma)); } - + /* * Receives on channel 0 */ @@ -2075,8 +2075,8 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) * EOP_SEEN here takes care of this case. * (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0) */ - - + + if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { sbdma_rx_process(sc,&(sc->sbm_rxdma)); } @@ -2087,29 +2087,29 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) /********************************************************************** * SBMAC_START_TX(skb,dev) - * - * Start output on the specified interface. Basically, we + * + * Start output on the specified interface. Basically, we * queue as many buffers as we can until the ring fills up, or * we run off the end of the queue, whichever comes first. - * - * Input parameters: - * - * + * + * Input parameters: + * + * * Return value: * nothing ********************************************************************* */ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + /* lock eth irq */ spin_lock_irq (&sc->sbm_lock); - + /* - * Put the buffer on the transmit ring. If we + * Put the buffer on the transmit ring. If we * don't have room, stop the queue. */ - + if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) { /* XXX save skb that we could not send */ netif_stop_queue(dev); @@ -2117,24 +2117,24 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) return 1; } - + dev->trans_start = jiffies; - + spin_unlock_irq (&sc->sbm_lock); - + return 0; } /********************************************************************** * SBMAC_SETMULTI(sc) - * + * * Reprogram the multicast table into the hardware, given * the list of multicasts associated with the interface * structure. - * - * Input parameters: + * + * Input parameters: * sc - softc - * + * * Return value: * nothing ********************************************************************* */ @@ -2146,52 +2146,52 @@ static void sbmac_setmulti(struct sbmac_softc *sc) int idx; struct dev_mc_list *mclist; struct net_device *dev = sc->sbm_dev; - - /* + + /* * Clear out entire multicast table. We do this by nuking * the entire hash table and all the direct matches except - * the first one, which is used for our station address + * the first one, which is used for our station address */ - + for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); __raw_writeq(0, port); } - + for (idx = 0; idx < MAC_HASH_COUNT; idx++) { port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); __raw_writeq(0, port); } - + /* * Clear the filter to say we don't want any multicasts. */ - + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); __raw_writeq(reg, sc->sbm_rxfilter); - + if (dev->flags & IFF_ALLMULTI) { - /* - * Enable ALL multicasts. Do this by inverting the - * multicast enable bit. + /* + * Enable ALL multicasts. Do this by inverting the + * multicast enable bit. */ reg = __raw_readq(sc->sbm_rxfilter); reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); __raw_writeq(reg, sc->sbm_rxfilter); return; } - - /* + + /* * Progam new multicast entries. For now, only use the * perfect filter. In the future we'll need to use the * hash filter if the perfect filter overflows */ - + /* XXX only using perfect filter for now, need to use hash * XXX if the table overflows */ - + idx = 1; /* skip station address */ mclist = dev->mc_list; while (mclist && (idx < MAC_ADDR_COUNT)) { @@ -2201,12 +2201,12 @@ static void sbmac_setmulti(struct sbmac_softc *sc) idx++; mclist = mclist->next; } - - /* + + /* * Enable the "accept multicast bits" if we programmed at least one - * multicast. + * multicast. */ - + if (idx > 1) { reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_MCAST_EN; @@ -2219,12 +2219,12 @@ static void sbmac_setmulti(struct sbmac_softc *sc) #if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) /********************************************************************** * SBMAC_PARSE_XDIGIT(str) - * + * * Parse a hex digit, returning its value - * - * Input parameters: + * + * Input parameters: * str - character - * + * * Return value: * hex value, or -1 if invalid ********************************************************************* */ @@ -2232,7 +2232,7 @@ static void sbmac_setmulti(struct sbmac_softc *sc) static int sbmac_parse_xdigit(char str) { int digit; - + if ((str >= '0') && (str <= '9')) digit = str - '0'; else if ((str >= 'a') && (str <= 'f')) @@ -2241,20 +2241,20 @@ static int sbmac_parse_xdigit(char str) digit = str - 'A' + 10; else return -1; - + return digit; } /********************************************************************** * SBMAC_PARSE_HWADDR(str,hwaddr) - * + * * Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte * Ethernet address. - * - * Input parameters: + * + * Input parameters: * str - string * hwaddr - pointer to hardware address - * + * * Return value: * 0 if ok, else -1 ********************************************************************* */ @@ -2263,7 +2263,7 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) { int digit1,digit2; int idx = 6; - + while (*str && (idx > 0)) { digit1 = sbmac_parse_xdigit(*str); if (digit1 < 0) @@ -2271,7 +2271,7 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) str++; if (!*str) return -1; - + if ((*str == ':') || (*str == '-')) { digit2 = digit1; digit1 = 0; @@ -2282,10 +2282,10 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) return -1; str++; } - + *hwaddr++ = (digit1 << 4) | digit2; idx--; - + if (*str == '-') str++; if (*str == ':') @@ -2306,12 +2306,12 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) /********************************************************************** * SBMAC_INIT(dev) - * + * * Attach routine - init hardware and hook ourselves into linux - * - * Input parameters: + * + * Input parameters: * dev - net_device structure - * + * * Return value: * status ********************************************************************* */ @@ -2323,53 +2323,53 @@ static int sbmac_init(struct net_device *dev, int idx) uint64_t ea_reg; int i; int err; - + sc = netdev_priv(dev); - + /* Determine controller base address */ - + sc->sbm_base = IOADDR(dev->base_addr); sc->sbm_dev = dev; sc->sbe_idx = idx; - + eaddr = sc->sbm_hwaddr; - - /* + + /* * Read the ethernet address. The firwmare left this programmed * for us in the ethernet address register for each mac. */ - + ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); for (i = 0; i < 6; i++) { eaddr[i] = (uint8_t) (ea_reg & 0xFF); ea_reg >>= 8; } - + for (i = 0; i < 6; i++) { dev->dev_addr[i] = eaddr[i]; } - - + + /* - * Init packet size + * Init packet size */ - + sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN; - /* + /* * Initialize context (get pointers to registers and stuff), then * allocate the memory for the descriptor tables. */ - + sbmac_initctx(sc); - + /* * Set up Linux device callins */ - + spin_lock_init(&(sc->sbm_lock)); - + dev->open = sbmac_open; dev->hard_start_xmit = sbmac_start_tx; dev->stop = sbmac_close; @@ -2399,10 +2399,10 @@ static int sbmac_init(struct net_device *dev, int idx) * was being displayed) */ printk(KERN_INFO - "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n", + "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n", dev->name, dev->base_addr, eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]); - + return 0; @@ -2416,12 +2416,12 @@ out_uninit: static int sbmac_open(struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + if (debug > 1) { printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq); } - - /* + + /* * map/route interrupt (clear status first, in case something * weird is pending; we haven't initialized the mac registers * yet) @@ -2432,35 +2432,35 @@ static int sbmac_open(struct net_device *dev) return -EBUSY; /* - * Configure default speed + * Configure default speed */ sbmac_mii_poll(sc,noisy_mii); - + /* * Turn on the channel */ sbmac_set_channel_state(sc,sbmac_state_on); - + /* * XXX Station address is in dev->dev_addr */ - + if (dev->if_port == 0) - dev->if_port = 0; - + dev->if_port = 0; + netif_start_queue(dev); - + sbmac_set_rx_mode(dev); - + /* Set the timer to check for link beat. */ init_timer(&sc->sbm_timer); sc->sbm_timer.expires = jiffies + 2 * HZ/100; sc->sbm_timer.data = (unsigned long)dev; sc->sbm_timer.function = &sbmac_timer; add_timer(&sc->sbm_timer); - + return 0; } @@ -2578,20 +2578,20 @@ static void sbmac_timer(unsigned long data) int mii_status; spin_lock_irq (&sc->sbm_lock); - + /* make IFF_RUNNING follow the MII status bit "Link established" */ mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR); - + if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) { sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT; if (mii_status & BMSR_LINKSTAT) { netif_carrier_on(dev); } else { - netif_carrier_off(dev); + netif_carrier_off(dev); } } - + /* * Poll the PHY to see what speed we should be running at */ @@ -2609,9 +2609,9 @@ static void sbmac_timer(unsigned long data) sbmac_channel_start(sc); } } - + spin_unlock_irq (&sc->sbm_lock); - + sc->sbm_timer.expires = jiffies + next_tick; add_timer(&sc->sbm_timer); } @@ -2620,13 +2620,13 @@ static void sbmac_timer(unsigned long data) static void sbmac_tx_timeout (struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + spin_lock_irq (&sc->sbm_lock); - - + + dev->trans_start = jiffies; sc->sbm_stats.tx_errors++; - + spin_unlock_irq (&sc->sbm_lock); printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); @@ -2639,13 +2639,13 @@ static struct net_device_stats *sbmac_get_stats(struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); unsigned long flags; - + spin_lock_irqsave(&sc->sbm_lock, flags); - + /* XXX update other stats here */ - + spin_unlock_irqrestore(&sc->sbm_lock, flags); - + return &sc->sbm_stats; } @@ -2662,8 +2662,8 @@ static void sbmac_set_rx_mode(struct net_device *dev) /* * Promiscuous changed. */ - - if (dev->flags & IFF_PROMISC) { + + if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ msg_flag = 1; sbmac_promiscuous_mode(sc,1); @@ -2674,18 +2674,18 @@ static void sbmac_set_rx_mode(struct net_device *dev) } } spin_unlock_irqrestore(&sc->sbm_lock, flags); - + if (msg_flag) { printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n", dev->name,(msg_flag==1)?"en":"dis"); } - + /* * Program the multicasts. Do this every time. */ - + sbmac_setmulti(sc); - + } static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -2694,10 +2694,10 @@ static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) u16 *data = (u16 *)&rq->ifr_ifru; unsigned long flags; int retval; - + spin_lock_irqsave(&sc->sbm_lock, flags); retval = 0; - + switch(cmd) { case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ data[0] = sc->sbm_phys[0] & 0x1f; @@ -2719,7 +2719,7 @@ static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) default: retval = -EOPNOTSUPP; } - + spin_unlock_irqrestore(&sc->sbm_lock, flags); return retval; } @@ -2750,7 +2750,7 @@ static int sbmac_close(struct net_device *dev) sbdma_emptyring(&(sc->sbm_txdma)); sbdma_emptyring(&(sc->sbm_rxdma)); - + return 0; } @@ -2781,7 +2781,7 @@ sbmac_init_module(void) struct net_device *dev; unsigned long port; int chip_max_units; - + /* * For bringup when not using the firmware, we can pre-fill * the MAC addresses using the environment variables @@ -2827,7 +2827,7 @@ sbmac_init_module(void) port = A_MAC_CHANNEL_BASE(idx); - /* + /* * The R_MAC_ETHERNET_ADDR register will be set to some nonzero * value for us by the firmware if we're going to use this MAC. * If we find a zero, skip this MAC. @@ -2845,7 +2845,7 @@ sbmac_init_module(void) */ dev = alloc_etherdev(sizeof(struct sbmac_softc)); - if (!dev) + if (!dev) return -ENOMEM; /* return ENOMEM */ printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port); -- cgit v1.2.3 From b06c093ed2dc968b3c140dafa55fa6c7b72169e5 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 19 Oct 2005 08:07:34 -0400 Subject: [PATCH] sundance: include MII address 0 in PHY probe Include MII address 0 at the end of the PHY scan. This covers the entire range of possible MII addresses. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index d8a7e08cab2b..5de0554fd7c6 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -609,16 +609,17 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, np->phys[0] = 1; /* Default setting */ np->mii_preamble_required++; - for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { + for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) { int mii_status = mdio_read(dev, phy, MII_BMSR); + int phyx = phy & 0x1f; if (mii_status != 0xffff && mii_status != 0x0000) { - np->phys[phy_idx++] = phy; - np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + np->phys[phy_idx++] = phyx; + np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE); if ((mii_status & 0x0040) == 0) np->mii_preamble_required++; printk(KERN_INFO "%s: MII PHY found at address %d, status " "0x%4.4x advertising %4.4x.\n", - dev->name, phy, mii_status, np->mii_if.advertising); + dev->name, phyx, mii_status, np->mii_if.advertising); } } np->mii_preamble_required--; -- cgit v1.2.3 From 07b8fede6da76ae6a0f547716c44b801a116bb4a Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Wed, 19 Oct 2005 10:40:08 -0400 Subject: [PATCH] e1000: Driver version, white space, comments, device id & other Driver version, white space, comments, device id & other Originally posted on 8/31 (and perhaps before)...I think it has not been committed because the patch from that posting was damaged. I'm reposting to make sure it gets in... :-) Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 40128b9d16ef..6b72f6acdd54 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -43,7 +43,7 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "6.0.60-k2"DRIVERNAPI +#define DRV_VERSION "6.1.16-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; @@ -80,6 +80,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1026), INTEL_E1000_ETHERNET_DEVICE(0x1027), INTEL_E1000_ETHERNET_DEVICE(0x1028), + INTEL_E1000_ETHERNET_DEVICE(0x105E), + INTEL_E1000_ETHERNET_DEVICE(0x105F), + INTEL_E1000_ETHERNET_DEVICE(0x1060), INTEL_E1000_ETHERNET_DEVICE(0x1075), INTEL_E1000_ETHERNET_DEVICE(0x1076), INTEL_E1000_ETHERNET_DEVICE(0x1077), @@ -88,10 +91,13 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x107A), INTEL_E1000_ETHERNET_DEVICE(0x107B), INTEL_E1000_ETHERNET_DEVICE(0x107C), + INTEL_E1000_ETHERNET_DEVICE(0x107D), + INTEL_E1000_ETHERNET_DEVICE(0x107E), + INTEL_E1000_ETHERNET_DEVICE(0x107F), INTEL_E1000_ETHERNET_DEVICE(0x108A), INTEL_E1000_ETHERNET_DEVICE(0x108B), INTEL_E1000_ETHERNET_DEVICE(0x108C), - INTEL_E1000_ETHERNET_DEVICE(0x1099), + INTEL_E1000_ETHERNET_DEVICE(0x109A), /* required last entry */ {0,} }; @@ -398,8 +404,7 @@ e1000_down(struct e1000_adapter *adapter) e1000_clean_all_tx_rings(adapter); e1000_clean_all_rx_rings(adapter); - /* If WoL is not enabled - * and management mode is not IAMT + /* If WoL is not enabled and management mode is not IAMT * Power down the PHY so no link is implied when interface is down */ if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 && adapter->hw.media_type == e1000_media_type_copper && -- cgit v1.2.3 From 3910f44d79a8a4a26fcfefbf16c5b8e1a7743175 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 20 Oct 2005 12:29:36 -0700 Subject: [IB] cm: Add missing break in switch Add missing "break" in switch statement. Without the break, the CM ended up always falling through and setting every connection request to use RC transport, which meant that UC connections didn't work. Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm_msgs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h index 813ab70bf6d5..4d3aee90c249 100644 --- a/drivers/infiniband/core/cm_msgs.h +++ b/drivers/infiniband/core/cm_msgs.h @@ -186,6 +186,7 @@ static inline void cm_req_set_qp_type(struct cm_req_msg *req_msg, req_msg->offset40 = cpu_to_be32((be32_to_cpu( req_msg->offset40) & 0xFFFFFFF9) | 0x2); + break; default: req_msg->offset40 = cpu_to_be32(be32_to_cpu( req_msg->offset40) & -- cgit v1.2.3 From 2e0c512aff978a7040464e81fc9c0dfdf4639c23 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 20 Oct 2005 12:30:16 -0700 Subject: [IB] user_mad: trivial coding style fixes Add spaces after "sizeof" operator to match the rest of file. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index a64d6b4dcc16..38f4bfbb7135 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -280,14 +280,14 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, length = count - sizeof (struct ib_user_mad); packet = kmalloc(sizeof *packet + sizeof(struct ib_mad_hdr) + - sizeof(struct ib_rmpp_hdr), GFP_KERNEL); + sizeof (struct ib_rmpp_hdr), GFP_KERNEL); if (!packet) return -ENOMEM; if (copy_from_user(&packet->mad, buf, sizeof (struct ib_user_mad) + - sizeof(struct ib_mad_hdr) + - sizeof(struct ib_rmpp_hdr))) { + sizeof (struct ib_mad_hdr) + + sizeof (struct ib_rmpp_hdr))) { ret = -EFAULT; goto err; } @@ -349,7 +349,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, } rmpp_active = 1; } else { - if (length > sizeof(struct ib_mad)) { + if (length > sizeof (struct ib_mad)) { ret = -EINVAL; goto err_ah; } @@ -376,17 +376,17 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, if (!rmpp_active) { /* Copy message from user into send buffer */ if (copy_from_user(packet->msg->mad, - buf + sizeof(struct ib_user_mad), length)) { + buf + sizeof (struct ib_user_mad), length)) { ret = -EFAULT; goto err_msg; } } else { - rmpp_hdr_size = sizeof(struct ib_mad_hdr) + - sizeof(struct ib_rmpp_hdr); + rmpp_hdr_size = sizeof (struct ib_mad_hdr) + + sizeof (struct ib_rmpp_hdr); /* Only copy MAD headers (RMPP header in place) */ memcpy(packet->msg->mad, packet->mad.data, - sizeof(struct ib_mad_hdr)); + sizeof (struct ib_mad_hdr)); /* Now, copy rest of message from user into send buffer */ if (copy_from_user(((struct ib_rmpp_mad *) packet->msg->mad)->data, -- cgit v1.2.3 From bbf207860931b6a033d0fbcd170ae2332c0d8216 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 20 Oct 2005 12:54:01 -0700 Subject: [IB] user_mad: Use class_device.devt Use devt member of struct class_device so that we don't have to create our own "dev" file in sysfs. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 38f4bfbb7135..fd200c064a2e 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -671,17 +671,6 @@ static struct ib_client umad_client = { .remove = ib_umad_remove_one }; -static ssize_t show_dev(struct class_device *class_dev, char *buf) -{ - struct ib_umad_port *port = class_get_devdata(class_dev); - - if (class_dev == &port->class_dev) - return print_dev_t(buf, port->dev.dev); - else - return print_dev_t(buf, port->sm_dev.dev); -} -static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL); - static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { struct ib_umad_port *port = class_get_devdata(class_dev); @@ -762,6 +751,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, port->class_dev.class = &umad_class; port->class_dev.dev = device->dma_device; + port->class_dev.devt = port->dev.dev; snprintf(port->class_dev.class_id, BUS_ID_SIZE, "umad%d", port->devnum); @@ -771,8 +761,6 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, class_set_devdata(&port->class_dev, port); kref_get(&port->umad_dev->ref); - if (class_device_create_file(&port->class_dev, &class_device_attr_dev)) - goto err_class; if (class_device_create_file(&port->class_dev, &class_device_attr_ibdev)) goto err_class; if (class_device_create_file(&port->class_dev, &class_device_attr_port)) @@ -786,6 +774,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, port->sm_class_dev.class = &umad_class; port->sm_class_dev.dev = device->dma_device; + port->sm_class_dev.devt = port->sm_dev.dev; snprintf(port->sm_class_dev.class_id, BUS_ID_SIZE, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS); @@ -795,8 +784,6 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, class_set_devdata(&port->sm_class_dev, port); kref_get(&port->umad_dev->ref); - if (class_device_create_file(&port->sm_class_dev, &class_device_attr_dev)) - goto err_sm_class; if (class_device_create_file(&port->sm_class_dev, &class_device_attr_ibdev)) goto err_sm_class; if (class_device_create_file(&port->sm_class_dev, &class_device_attr_port)) -- cgit v1.2.3 From 7e6c1208598004a80b1c1fca4953eb9f2a6aa8bc Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Thu, 20 Oct 2005 08:39:43 -0400 Subject: [PATCH] libata: Marvell endian fix Jeff found an endian bug in the Marvell driver (thanks!). Here's the fix for it. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index d457f5673476..9b6213928f7a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.24" +#define DRV_VERSION "0.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -800,7 +800,8 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); } if (0 < qc->n_elem) { - pp->sg_tbl[qc->n_elem - 1].flags_size |= EPRD_FLAG_END_OF_TBL; + pp->sg_tbl[qc->n_elem - 1].flags_size |= + cpu_to_le32(EPRD_FLAG_END_OF_TBL); } } -- cgit v1.2.3 From 59b81827071a8ae7f399da533d268e1e33bfeeb7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 20 Oct 2005 12:01:28 +0100 Subject: [PATCH] sb1250-mac: PHY probing fixes. Improve sb1250-mac driver to probe for PHYs at addresses other than 1, such as the PHYs on BigSur. Signed-Off-By: Andy Isaacson Signed-off-by: Ralf Baechle Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index d4c8ecdfa4a7..aa4ca1821759 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -296,6 +296,7 @@ static void sbmac_set_rx_mode(struct net_device *dev); static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int sbmac_close(struct net_device *dev); static int sbmac_mii_poll(struct sbmac_softc *s,int noisy); +static int sbmac_mii_probe(struct net_device *dev); static void sbmac_mii_sync(struct sbmac_softc *s); static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt); @@ -433,6 +434,9 @@ static uint64_t sbmac_orig_hwaddr[MAX_UNITS]; #define MII_BMCR 0x00 /* Basic mode control register (rw) */ #define MII_BMSR 0x01 /* Basic mode status register (ro) */ +#define MII_PHYIDR1 0x02 +#define MII_PHYIDR2 0x03 + #define MII_K1STSR 0x0A /* 1K Status Register (ro) */ #define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */ @@ -2431,6 +2435,15 @@ static int sbmac_open(struct net_device *dev) if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev)) return -EBUSY; + /* + * Probe phy address + */ + + if(sbmac_mii_probe(dev) == -1) { + printk("%s: failed to probe PHY.\n", dev->name); + return -EINVAL; + } + /* * Configure default speed */ @@ -2464,6 +2477,29 @@ static int sbmac_open(struct net_device *dev) return 0; } +static int sbmac_mii_probe(struct net_device *dev) +{ + int i; + struct sbmac_softc *s = netdev_priv(dev); + u16 bmsr, id1, id2; + u32 vendor, device; + + for (i=1; i<31; i++) { + bmsr = sbmac_mii_read(s, i, MII_BMSR); + if (bmsr != 0) { + s->sbm_phys[0] = i; + id1 = sbmac_mii_read(s, i, MII_PHYIDR1); + id2 = sbmac_mii_read(s, i, MII_PHYIDR2); + vendor = ((u32)id1 << 6) | ((id2 >> 10) & 0x3f); + device = (id2 >> 4) & 0x3f; + + printk(KERN_INFO "%s: found phy %d, vendor %06x part %02x\n", + dev->name, i, vendor, device); + return i; + } + } + return -1; +} static int sbmac_mii_poll(struct sbmac_softc *s,int noisy) -- cgit v1.2.3 From 9ee0c0a2ccd66b90eaeb2f197c0a7da43071af52 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_nv) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 9fa2535dd937..8866530bc491 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -331,7 +331,7 @@ static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) return 0xffffffffU; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -345,7 +345,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) return; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); } -- cgit v1.2.3 From 1e4f2a96aeb373000ccd783e0f5b40294b5e668a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (ahci) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 5ec866b00479..cfa22e4ee547 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -407,7 +407,7 @@ static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) return 0xffffffffU; } - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -425,7 +425,7 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, return; } - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void ahci_phy_reset(struct ata_port *ap) @@ -453,14 +453,14 @@ static void ahci_phy_reset(struct ata_port *ap) static u8 ahci_check_status(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return readl(mmio + PORT_TFDATA) & 0xFF; } static u8 ahci_check_err(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; } -- cgit v1.2.3 From b181d3b0121e141cb410ea3126b4dbe4f8e1751a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_promise) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index def7e0d9dacb..9bf8cbd29901 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -324,7 +324,7 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -333,7 +333,7 @@ static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void pdc_qc_prep(struct ata_queued_cmd *qc) @@ -523,8 +523,8 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) pp->pkt[2] = seq; wmb(); /* flush PRD, pkt writes */ - writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ + writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) -- cgit v1.2.3 From 0420dd121d395e76f6b80fe232e7b4bc6a046f18 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] enum safety (sata_qstor) sata_qstor strays into a nasty area - gcc handling of wide enums is full of bugs that got fixed between gcc versions creating portability nightmare. Single-member enums are safe, so are ones that stay within the range of int or unsigned int. Anything beyond that is asking for trouble. Declaration of constants split in two enums, taking the ~0UL one into a separate enum. Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_qstor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index ffcdeb68641c..e1c1dae27c52 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -51,8 +51,6 @@ enum { QS_PRD_BYTES = QS_MAX_PRD * 16, QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, - QS_DMA_BOUNDARY = ~0UL, - /* global register offsets */ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ QS_HID_HPHY = 0x0004, /* host physical interface info */ @@ -101,6 +99,10 @@ enum { board_2068_idx = 0, /* QStor 4-port SATA/RAID */ }; +enum { + QS_DMA_BOUNDARY = ~0UL +}; + typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; struct qs_port_priv { -- cgit v1.2.3 From a9afd7cd2f65ff85f5ffe931beb879ccf12540e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_sx4) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sx4.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 540a85191172..d6d350a0b5e9 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -137,7 +137,7 @@ struct pdc_port_priv { }; struct pdc_host_priv { - void *dimm_mmio; + void __iomem *dimm_mmio; unsigned int doing_hdma; unsigned int hdma_prod; @@ -247,7 +247,7 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) { struct pci_dev *pdev = to_pci_dev(host_set->dev); struct pdc_host_priv *hpriv = host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; pci_iounmap(pdev, dimm_mmio); kfree(hpriv); @@ -669,8 +669,8 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); VPRINTK("submitted ofs 0x%x (%u), seq %u\n", port_ofs + PDC_DIMM_ATA_PKT, port_ofs + PDC_DIMM_ATA_PKT, @@ -747,8 +747,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); readl(mmio + PDC_20621_SEQCTL + (seq * 4)); writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); } /* step two - execute ATA command */ @@ -1014,7 +1014,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, idx++; dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); - memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist); + memcpy_toio(dimm_mmio + offset / 4, psource, dist); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -1023,8 +1023,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, for (; (long) size >= (long) window_size ;) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, - window_size / 4); + memcpy_toio(dimm_mmio, psource, window_size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); psource += window_size; @@ -1035,7 +1034,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, if (size) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4); + memcpy_toio(dimm_mmio, psource, size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); } -- cgit v1.2.3 From 9aa36e89b5677a98d951cf7bef6d99a0f93ea633 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_sil) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index ba98a175ee3a..f6f0184e1ac8 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -289,7 +289,7 @@ static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_re static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) return readl(mmio); return 0xffffffffU; @@ -297,7 +297,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) writel(val, mmio); } -- cgit v1.2.3 From 307e4dc28ee255bf22b431f242f847c9d96fe3fa Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH] iomem annotations (sata_vsc) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_vsc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cf94e0158a8d..877b9fda3965 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -86,7 +86,7 @@ static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -95,16 +95,16 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { - unsigned long mask_addr; + void __iomem *mask_addr; u8 mask; - mask_addr = (unsigned long) ap->host_set->mmio_base + + mask_addr = ap->host_set->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) @@ -283,7 +283,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d struct ata_probe_ent *probe_ent = NULL; unsigned long base; int pci_dev_busy = 0; - void *mmio_base; + void __iomem *mmio_base; int rc; if (!printed_version++) -- cgit v1.2.3 From 11e29e21514517f3022a1f30998ac4c7b1197658 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 18:46:32 -0400 Subject: libata: handle early device PIO modes correctly --- drivers/scsi/libata-core.c | 31 +++++++++++++++++++++++++++---- include/linux/ata.h | 13 +++++++++---- 2 files changed, 36 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 175d4646333d..09639e7aaa71 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1082,6 +1082,31 @@ static inline void ata_dump_id(struct ata_device *dev) dev->id[93]); } +/* + * Compute the PIO modes available for this device. This is not as + * trivial as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + */ + +static unsigned int ata_pio_modes(struct ata_device *adev) +{ + u16 modes; + + /* Usual case. Word 53 indicates word 88 is valid */ + if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) { + modes = adev->id[ATA_ID_PIO_MODES] & 0x03; + modes <<= 3; + modes |= 0x7; + return modes; + } + + /* If word 88 isn't valid then Word 51 holds the PIO timing number + for the maximum. Turn it into a mask and return it */ + modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + return modes; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1215,10 +1240,8 @@ retry: xfer_modes = dev->id[ATA_ID_UDMA_MODES]; if (!xfer_modes) xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) { - xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3); - xfer_modes |= (0x7 << ATA_SHIFT_PIO); - } + if (!xfer_modes) + xfer_modes = ata_pio_modes(dev); ata_dump_id(dev); diff --git a/include/linux/ata.h b/include/linux/ata.h index 630908c9378b..33276d1d05d2 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -42,13 +42,18 @@ enum { ATA_SECT_SIZE = 512, ATA_ID_WORDS = 256, - ATA_ID_PROD_OFS = 27, - ATA_ID_FW_REV_OFS = 23, ATA_ID_SERNO_OFS = 10, - ATA_ID_MAJOR_VER = 80, - ATA_ID_PIO_MODES = 64, + ATA_ID_FW_REV_OFS = 23, + ATA_ID_PROD_OFS = 27, + ATA_ID_OLD_PIO_MODES = 51, + ATA_ID_FIELD_VALID = 53, ATA_ID_MWDMA_MODES = 63, + ATA_ID_PIO_MODES = 64, + ATA_ID_EIDE_DMA_MIN = 65, + ATA_ID_EIDE_PIO = 67, + ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_UDMA_MODES = 88, + ATA_ID_MAJOR_VER = 80, ATA_ID_PIO4 = (1 << 1), ATA_PCI_CTL_OFS = 2, -- cgit v1.2.3 From 452503f993feffe96e8cc9fbff4888b96e2c5e40 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 19:01:32 -0400 Subject: Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 39 ++++++++++++ 2 files changed, 188 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 09639e7aaa71..9269fd9b814f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1538,6 +1538,152 @@ void ata_port_disable(struct ata_port *ap) ap->flags |= ATA_FLAG_PORT_DISABLED; } +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + +/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode != 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(s, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T + * and some other commands. We have to ensure that the DMA cycle timing is + * slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lenghten active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + static struct { unsigned int shift; u8 base; @@ -4764,6 +4910,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_host_stop); diff --git a/include/linux/libata.h b/include/linux/libata.h index 0261c55f3483..0e214f8c8f9f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -388,6 +388,19 @@ struct ata_port_info { struct ata_port_operations *port_ops; }; +struct ata_timing { + unsigned short mode; /* ATA mode */ + unsigned short setup; /* t1 */ + unsigned short act8b; /* t2 for 8-bit I/O */ + unsigned short rec8b; /* t2i for 8-bit I/O */ + unsigned short cyc8b; /* t0 for 8-bit I/O */ + unsigned short active; /* t2 or tD */ + unsigned short recover; /* t2i or tK */ + unsigned short cycle; /* t0 */ + unsigned short udma; /* t2CYCTYP/2 */ +}; + +#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); @@ -451,6 +464,32 @@ extern int ata_std_bios_param(struct scsi_device *sdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); +/* + * Timing helpers + */ +extern int ata_timing_compute(struct ata_device *, unsigned short, + struct ata_timing *, int, int); +extern void ata_timing_merge(const struct ata_timing *, + const struct ata_timing *, struct ata_timing *, + unsigned int); + +enum { + ATA_TIMING_SETUP = (1 << 0), + ATA_TIMING_ACT8B = (1 << 1), + ATA_TIMING_REC8B = (1 << 2), + ATA_TIMING_CYC8B = (1 << 3), + ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B | + ATA_TIMING_CYC8B, + ATA_TIMING_ACTIVE = (1 << 4), + ATA_TIMING_RECOVER = (1 << 5), + ATA_TIMING_CYCLE = (1 << 6), + ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | + ATA_TIMING_REC8B | ATA_TIMING_CYC8B | + ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | + ATA_TIMING_CYCLE | ATA_TIMING_UDMA, +}; + #ifdef CONFIG_PCI struct pci_bits { -- cgit v1.2.3 From 5658374766d9e0249bd04e9d62bdb8456b916b64 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:33:38 -0400 Subject: [PARISC] Convert parisc_device tree to use struct device klists Fix parse_tree_node. much more needs to be done to fix this file. Signed-off-by: Matthew Wilcox Make drivers.c compile based on a patch from Pat Mochel. From: Patrick Mochel Signed-off-by: Kyle McMartin Fix drivers.c to create new device tree nodes when no match is found. Signed-off-by: Richard Hirst Do a proper depth-first search returning parents before children, using the new klist infrastructure. Signed-off-by: Richard Hirst Fixed parisc_device traversal so that pdc_stable works again Fixed check_dev so it doesn't dereference a parisc_device until it has verified the bus type Signed-off-by: Randolph Chung Convert pa_dev->hpa from an unsigned long to a struct resource. Use insert_resource() instead of request_mem_region(). Request resources at bus walk time instead of driver probe time. Don't release the resources as we don't have any hotplug parisc_device support yet. Add parisc_pathname() to conveniently get the textual representation of the hwpath used in sysfs. Inline the remnants of claim_device() into its caller. Signed-off-by: Matthew Wilcox I noticed that some of the STI regions weren't showing up in iomem. Reading the STI spec indicated that all STI devices occupy at least 32MB. So check for STI HPAs and give them 32MB instead of 4kB. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/drivers.c | 273 +++++++++++++++++++++++++------------ drivers/parisc/gsc.c | 11 +- drivers/parisc/sba_iommu.c | 18 ++- include/asm-parisc/parisc-device.h | 5 + 4 files changed, 216 insertions(+), 91 deletions(-) (limited to 'drivers') diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index d34bbe7ae0e3..988844a169e6 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -46,36 +46,51 @@ static struct device root = { .bus_id = "parisc", }; -#define for_each_padev(padev) \ - for (padev = next_dev(&root); padev != NULL; \ - padev = next_dev(&padev->dev)) +static inline int check_dev(struct device *dev) +{ + if (dev->bus == &parisc_bus_type) { + struct parisc_device *pdev; + pdev = to_parisc_device(dev); + return pdev->id.hw_type != HPHW_FAULTY; + } + return 1; +} + +static struct device * +parse_tree_node(struct device *parent, int index, struct hardware_path *modpath); -#define check_dev(padev) \ - (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev) +struct recurse_struct { + void * obj; + int (*fn)(struct device *, void *); +}; + +static int descend_children(struct device * dev, void * data) +{ + struct recurse_struct * recurse_data = (struct recurse_struct *)data; + + if (recurse_data->fn(dev, recurse_data->obj)) + return 1; + else + return device_for_each_child(dev, recurse_data, descend_children); +} /** - * next_dev - enumerates registered devices - * @dev: the previous device returned from next_dev + * for_each_padev - Iterate over all devices in the tree + * @fn: Function to call for each device. + * @data: Data to pass to the called function. * - * next_dev does a depth-first search of the tree, returning parents - * before children. Returns NULL when there are no more devices. + * This performs a depth-first traversal of the tree, calling the + * function passed for each node. It calls the function for parents + * before children. */ -static struct parisc_device *next_dev(struct device *dev) -{ - if (!list_empty(&dev->children)) { - dev = list_to_dev(dev->children.next); - return check_dev(to_parisc_device(dev)); - } - while (dev != &root) { - if (dev->node.next != &dev->parent->children) { - dev = list_to_dev(dev->node.next); - return to_parisc_device(dev); - } - dev = dev->parent; - } - - return NULL; +static int for_each_padev(int (*fn)(struct device *, void *), void * data) +{ + struct recurse_struct recurse_data = { + .obj = data, + .fn = fn, + }; + return device_for_each_child(&root, &recurse_data, descend_children); } /** @@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev) return 0; } -static void claim_device(struct parisc_driver *driver, struct parisc_device *dev) -{ - dev->driver = driver; - request_mem_region(dev->hpa, 0x1000, driver->name); -} - static int parisc_driver_probe(struct device *dev) { int rc; @@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev) rc = pa_drv->probe(pa_dev); - if(!rc) - claim_device(pa_drv, pa_dev); + if (!rc) + pa_dev->driver = pa_drv; return rc; } @@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev) struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); if (pa_drv->remove) pa_drv->remove(pa_dev); - release_mem_region(pa_dev->hpa, 0x1000); return 0; } @@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(register_parisc_driver); + +struct match_count { + struct parisc_driver * driver; + int count; +}; + +static int match_and_count(struct device * dev, void * data) +{ + struct match_count * m = data; + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) { + if (match_device(m->driver, pdev)) + m->count++; + } + return 0; +} + /** * count_parisc_driver - count # of devices this driver would match * @driver: the PA-RISC driver to try @@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver); */ int count_parisc_driver(struct parisc_driver *driver) { - struct parisc_device *device; - int cnt = 0; + struct match_count m = { + .driver = driver, + .count = 0, + }; - for_each_padev(device) { - if (match_device(driver, device)) - cnt++; - } + for_each_padev(match_and_count, &m); - return cnt; + return m.count; } @@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(unregister_parisc_driver); -static struct parisc_device *find_device_by_addr(unsigned long hpa) +struct find_data { + unsigned long hpa; + struct parisc_device * dev; +}; + +static int find_device(struct device * dev, void * data) { - struct parisc_device *dev; - for_each_padev(dev) { - if (dev->hpa == hpa) - return dev; + struct parisc_device * pdev = to_parisc_device(dev); + struct find_data * d = (struct find_data*)data; + + if (check_dev(dev)) { + if (pdev->hpa.start == d->hpa) { + d->dev = pdev; + return 1; + } } - return NULL; + return 0; +} + +static struct parisc_device *find_device_by_addr(unsigned long hpa) +{ + struct find_data d = { + .hpa = hpa, + }; + int ret; + + ret = for_each_padev(find_device, &d); + return ret ? d.dev : NULL; } /** @@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent) return dev; } +struct match_id_data { + char id; + struct parisc_device * dev; +}; + +static int match_by_id(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + struct match_id_data * d = data; + + if (pdev->hw_path == d->id) { + d->dev = pdev; + return 1; + } + return 0; +} + /** * alloc_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent) */ static struct parisc_device * alloc_tree_node(struct device *parent, char id) { - struct device *dev; - - list_for_each_entry(dev, &parent->children, node) { - struct parisc_device *padev = to_parisc_device(dev); - if (padev->hw_path == id) - return padev; - } - - return create_tree_node(id, parent); + struct match_id_data d = { + .id = id, + }; + if (device_for_each_child(parent, &d, match_by_id)) + return d.dev; + else + return create_tree_node(id, parent); } static struct parisc_device *create_parisc_device(struct hardware_path *modpath) @@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - char p[64]; - print_pa_hwpath(dev, p); printk("Two devices have hardware path %s. Please file a bug with HP.\n" - "In the meantime, you could try rearranging your cards.\n", p); + "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev)); return NULL; } @@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev->id.hversion_rev = iodc_data[1] & 0x0f; dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) | (iodc_data[5] << 8) | iodc_data[6]; - dev->hpa = hpa; + dev->hpa.name = parisc_pathname(dev); + dev->hpa.start = hpa; + if (hpa == 0xf4000000 || hpa == 0xf6000000 || + hpa == 0xf8000000 || hpa == 0xfa000000) { + dev->hpa.end = hpa + 0x01ffffff; + } else { + dev->hpa.end = hpa + 0xfff; + } + dev->hpa.flags = IORESOURCE_MEM; name = parisc_hardware_description(&dev->id); if (name) { strlcpy(dev->name, name, sizeof(dev->name)); } + /* Silently fail things like mouse ports which are subsumed within + * the keyboard controller + */ + if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) + printk("Unable to claim HPA %lx for device %s\n", + hpa, name); + return dev; } @@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index, return (curr->hw_path == id); } +struct parse_tree_data { + int index; + struct hardware_path * modpath; + struct device * dev; +}; + +static int check_parent(struct device * dev, void * data) +{ + struct parse_tree_data * d = data; + + if (check_dev(dev)) { + if (dev->bus == &parisc_bus_type) { + if (match_parisc_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (is_pci_dev(dev)) { + if (match_pci_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (dev->bus == NULL) { + /* we are on a bus bridge */ + struct device *new = parse_tree_node(dev, d->index, d->modpath); + if (new) + d->dev = new; + } + } + return d->dev != NULL; +} + /** * parse_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index, static struct device * parse_tree_node(struct device *parent, int index, struct hardware_path *modpath) { - struct device *device; - - list_for_each_entry(device, &parent->children, node) { - if (device->bus == &parisc_bus_type) { - if (match_parisc_device(device, index, modpath)) - return device; - } else if (is_pci_dev(device)) { - if (match_pci_device(device, index, modpath)) - return device; - } else if (device->bus == NULL) { - /* we are on a bus bridge */ - struct device *new = parse_tree_node(device, index, modpath); - if (new) - return new; - } - } + struct parse_tree_data d = { + .index = index, + .modpath = modpath, + }; - return NULL; + struct recurse_struct recurse_data = { + .obj = &d, + .fn = check_parent, + }; + + device_for_each_child(parent, &recurse_data, descend_children); + return d.dev; } /** @@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath); ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT)) #define IS_LOWER_PORT(dev) \ - ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \ + ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \ & BC_PORT_MASK) == BC_LOWER_PORT) #define MAX_NATIVE_DEVICES 64 @@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath); #define FLEX_MASK F_EXTEND(0xfffc0000) #define IO_IO_LOW offsetof(struct bc_module, io_io_low) #define IO_IO_HIGH offsetof(struct bc_module, io_io_high) -#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW) -#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH) +#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW) +#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH) static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, struct device *parent); @@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev) { unsigned long io_io_low, io_io_high; - if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) + if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) return; - if(dev->id.hw_type == HPHW_IOA) { + if (dev->id.hw_type == HPHW_IOA) { io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16); io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET; } else { @@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev) print_pa_hwpath(dev, hw_path); printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", - ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type, + ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); if (dev->num_addrs) { @@ -753,13 +847,20 @@ void init_parisc_bus(void) get_device(&root); } + +static int print_one_device(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) + print_parisc_device(pdev); + return 0; +} + /** * print_parisc_devices - Print out a list of devices found in this system */ void print_parisc_devices(void) { - struct parisc_device *dev; - for_each_padev(dev) { - print_parisc_device(dev); - } + for_each_padev(print_one_device, NULL); } diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index af5e02526a18..16d40f95978d 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -183,12 +183,20 @@ void gsc_asic_assign_irq(struct gsc_asic *asic, int local_irq, int *irqp) *irqp = irq; } +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, void (*choose_irq)(struct parisc_device *, void *)) { struct device *dev; + struct klist_iter i; - list_for_each_entry(dev, &parent->dev.children, node) { + klist_iter_init(&parent->dev.klist_children, &i); + while ((dev = next_device(&i))) { struct parisc_device *padev = to_parisc_device(dev); /* work-around for 715/64 and others which have parent @@ -197,6 +205,7 @@ void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, return gsc_fixup_irqs(padev, ctrl, choose_irq); choose_irq(padev, ctrl); } + klist_iter_exit(&i); } int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 82ea68b55df4..a8405f05fb5f 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1322,19 +1322,29 @@ sba_alloc_pdir(unsigned int pdir_size) return (void *) pdir_base; } +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + /* setup Mercury or Elroy IBASE/IMASK registers. */ -static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) +static void +setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) { - /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ + /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ extern void lba_set_iregs(struct parisc_device *, u32, u32); struct device *dev; + struct klist_iter i; - list_for_each_entry(dev, &sba->dev.children, node) { + klist_iter_init(&sba->dev.klist_children, &i); + while ((dev = next_device(&i))) { struct parisc_device *lba = to_parisc_device(dev); - int rope_num = (lba->hpa >> 13) & 0xf; + int rope_num = (lba->hpa.start >> 13) & 0xf; if (rope_num >> 3 == ioc_num) lba_set_iregs(lba, ioc->ibase, ioc->imask); } + klist_iter_exit(&i); } static void diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h index ef69ab4b17a9..cbde8b41c84b 100644 --- a/include/asm-parisc/parisc-device.h +++ b/include/asm-parisc/parisc-device.h @@ -39,6 +39,11 @@ struct parisc_driver { #define to_parisc_driver(d) container_of(d, struct parisc_driver, drv) #define parisc_parent(d) to_parisc_device(d->dev.parent) +static inline char *parisc_pathname(struct parisc_device *d) +{ + return d->dev.bus_id; +} + static inline void parisc_set_drvdata(struct parisc_device *d, void *p) { -- cgit v1.2.3 From bdad1f836ab1ca2b18a625222f63f630cfd14e41 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:36:23 -0400 Subject: [PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver names. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/input/keyboard/hilkbd.c | 2 +- drivers/input/serio/gscps2.c | 2 +- drivers/input/serio/hp_sdc.c | 2 +- drivers/net/lasi_82596.c | 2 +- drivers/parisc/asp.c | 2 +- drivers/parisc/ccio-dma.c | 2 +- drivers/parisc/dino.c | 4 ++-- drivers/parisc/eisa.c | 2 +- drivers/parisc/hppb.c | 2 +- drivers/parisc/lasi.c | 2 +- drivers/scsi/lasi700.c | 2 +- drivers/serial/mux.c | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index eecb77db0847..8aa81c9ac2f7 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -299,7 +299,7 @@ static struct parisc_device_id hil_tbl[] = { MODULE_DEVICE_TABLE(parisc, hil_tbl); static struct parisc_driver hil_driver = { - .name = "HIL", + .name = "hil", .id_table = hil_tbl, .probe = hil_init_chip, }; diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 897e4c12b642..4bad2810190c 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -444,7 +444,7 @@ static struct parisc_device_id gscps2_device_tbl[] = { }; static struct parisc_driver parisc_ps2_driver = { - .name = "GSC PS2", + .name = "gsc_ps2", .id_table = gscps2_device_tbl, .probe = gscps2_probe, .remove = gscps2_remove, diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 7629452dd64b..045b9a7a9dbb 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -764,7 +764,7 @@ MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl); static int __init hp_sdc_init_hppa(struct parisc_device *d); static struct parisc_driver hp_sdc_driver = { - .name = "HP SDC", + .name = "hp_sdc", .id_table = hp_sdc_tbl, .probe = hp_sdc_init_hppa, }; diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index 41bad07ac1ac..180e526a2049 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -1566,7 +1566,7 @@ static struct parisc_device_id lan_tbl[] = { MODULE_DEVICE_TABLE(parisc, lan_tbl); static struct parisc_driver lan_driver = { - .name = "Apricot", + .name = "lasi_82596", .id_table = lan_tbl, .probe = lan_init_chip, }; diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c index 388609967133..52f37b424318 100644 --- a/drivers/parisc/asp.c +++ b/drivers/parisc/asp.c @@ -126,7 +126,7 @@ static struct parisc_device_id asp_tbl[] = { }; struct parisc_driver asp_driver = { - .name = "Asp", + .name = "asp", .id_table = asp_tbl, .probe = asp_init_chip, }; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 0e98a9d9834c..2bb1889c4c4f 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1251,7 +1251,7 @@ static struct parisc_device_id ccio_tbl[] = { static int ccio_probe(struct parisc_device *dev); static struct parisc_driver ccio_driver = { - .name = "U2:Uturn", + .name = "ccio", .id_table = ccio_tbl, .probe = ccio_probe, }; diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 2f2dbef2c3b7..8c61705e67a5 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -1027,9 +1027,9 @@ static struct parisc_device_id dino_tbl[] = { }; static struct parisc_driver dino_driver = { - .name = "Dino", + .name = "dino", .id_table = dino_tbl, - .probe = dino_driver_callback, + .probe = dino_probe, }; /* diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 043d47aea75b..0afeedddf535 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -397,7 +397,7 @@ static struct parisc_device_id eisa_tbl[] = { MODULE_DEVICE_TABLE(parisc, eisa_tbl); static struct parisc_driver eisa_driver = { - .name = "EISA Bus Adapter", + .name = "eisa_ba", .id_table = eisa_tbl, .probe = eisa_probe, }; diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index e869c6020370..a6eae3e7c0cd 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -93,7 +93,7 @@ static struct parisc_device_id hppb_tbl[] = { }; static struct parisc_driver hppb_driver = { - .name = "Gecko Boa", + .name = "gecko_boa", .id_table = hppb_tbl, .probe = hppb_probe, }; diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c index cb84a4e84a2f..c776c372ae4e 100644 --- a/drivers/parisc/lasi.c +++ b/drivers/parisc/lasi.c @@ -233,7 +233,7 @@ static struct parisc_device_id lasi_tbl[] = { }; struct parisc_driver lasi_driver = { - .name = "Lasi", + .name = "lasi", .id_table = lasi_tbl, .probe = lasi_init_chip, }; diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 4cbb6187cc44..123f4933d8f5 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -168,7 +168,7 @@ lasi700_driver_remove(struct parisc_device *dev) } static struct parisc_driver lasi700_driver = { - .name = "Lasi SCSI", + .name = "lasi_scsi", .id_table = lasi700_ids, .probe = lasi700_probe, .remove = __devexit_p(lasi700_driver_remove), diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 189064607709..a12005b08bca 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -497,7 +497,7 @@ static struct parisc_device_id mux_tbl[] = { MODULE_DEVICE_TABLE(parisc, mux_tbl); static struct parisc_driver serial_mux_driver = { - .name = "Serial MUX", + .name = "serial_mux", .id_table = mux_tbl, .probe = mux_probe, }; -- cgit v1.2.3 From 53f01bba49938f115237fe43a261c31ac13ae5c6 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:36:40 -0400 Subject: [PARISC] Convert parisc_device to use struct resource for hpa Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: Matthew Wilcox Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/perf.c | 12 +++++++----- arch/parisc/kernel/processor.c | 8 ++++---- drivers/input/keyboard/hilkbd.c | 4 ++-- drivers/input/serio/gscps2.c | 2 +- drivers/input/serio/hp_sdc.c | 6 +++--- drivers/net/lasi_82596.c | 7 ++++--- drivers/parisc/asp.c | 4 ++-- drivers/parisc/ccio-dma.c | 4 ++-- drivers/parisc/ccio-rm-dma.c | 2 +- drivers/parisc/dino.c | 6 +++--- drivers/parisc/eisa.c | 2 +- drivers/parisc/hppb.c | 8 ++++---- drivers/parisc/lasi.c | 2 +- drivers/parisc/lba_pci.c | 14 +++++++------- drivers/parisc/sba_iommu.c | 6 +++--- drivers/parisc/wax.c | 2 +- drivers/parport/parport_gsc.c | 5 +++-- drivers/scsi/lasi700.c | 2 +- drivers/scsi/zalon.c | 4 ++-- drivers/serial/8250_gsc.c | 5 +++-- drivers/serial/mux.c | 2 +- include/asm-parisc/parisc-device.h | 2 +- sound/parisc/harmony.c | 6 +++--- 23 files changed, 60 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index b3ad0a505b87..44670d6e06f4 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr) uint64_t *bptr; uint32_t dwords; uint32_t *intrigue_rdr; - uint64_t *intrigue_bitmask, tmp64, proc_hpa; + uint64_t *intrigue_bitmask, tmp64; + void __iomem *runway; struct rdr_tbl_ent *tentry; int i; @@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr) return -1; } - proc_hpa = cpu_device->hpa; + runway = ioremap(cpu_device->hpa.start, 4096); /* Merge intrigue bits into Runway STATUS 0 */ - tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; - __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), + runway + RUNWAY_STATUS); /* Write RUNWAY DEBUG registers */ for (i = 0; i < 8; i++) { - __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG); } return 0; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 13b721cb9f55..4f5bbcf1f5a4 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev) * May get overwritten by PAT code. */ cpuid = boot_cpu_data.cpu_count; - txn_addr = dev->hpa; /* for legacy PDC */ + txn_addr = dev->hpa.start; /* for legacy PDC */ #ifdef __LP64__ if (is_pdc_pat()) { @@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev) * boot time (ie shutdown a CPU from an OS perspective). */ /* get the cpu number */ - status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start); BUG_ON(PDC_OK != status); @@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev) printk(KERN_WARNING "IGNORING CPU at 0x%x," " cpu_slot_id > NR_CPUS" " (%ld > %d)\n", - dev->hpa, cpu_info.cpu_num, NR_CPUS); + dev->hpa.start, cpu_info.cpu_num, NR_CPUS); /* Ignore CPU since it will only crash */ boot_cpu_data.cpu_count--; return 1; @@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev) p->loops_per_jiffy = loops_per_jiffy; p->dev = dev; /* Save IODC data in case we need it */ - p->hpa = dev->hpa; /* save CPU hpa */ + p->hpa = dev->hpa.start; /* save CPU hpa */ p->cpuid = cpuid; /* save CPU id */ p->txn_addr = txn_addr; /* save CPU IRQ address */ #ifdef CONFIG_SMP diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index 8aa81c9ac2f7..e7a1e14f8b0c 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -278,11 +278,11 @@ static int __init hil_init_chip(struct parisc_device *dev) { if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); return -ENODEV; } - hil_base = dev->hpa; + hil_base = dev->hpa.start; hil_irq = dev->irq; hil_dev.dev_id = dev; diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 4bad2810190c..9790d7169a53 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -331,7 +331,7 @@ static int __init gscps2_probe(struct parisc_device *dev) { struct gscps2port *ps2port; struct serio *serio; - unsigned long hpa = dev->hpa; + unsigned long hpa = dev->hpa.start; int ret; if (!dev->irq) diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 045b9a7a9dbb..a10348bb25e9 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -875,9 +875,9 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.dev = d; hp_sdc.irq = d->irq; hp_sdc.nmi = d->aux_irq; - hp_sdc.base_io = d->hpa; - hp_sdc.data_io = d->hpa + 0x800; - hp_sdc.status_io = d->hpa + 0x801; + hp_sdc.base_io = d->hpa.start; + hp_sdc.data_io = d->hpa.start + 0x800; + hp_sdc.status_io = d->hpa.start + 0x801; return hp_sdc_init(); } diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index 180e526a2049..a63d8a317d9e 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -1528,17 +1528,18 @@ lan_init_chip(struct parisc_device *dev) if (!dev->irq) { printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n", - __FILE__, dev->hpa); + __FILE__, dev->hpa.start); return -ENODEV; } - printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq); + printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start, + dev->irq); netdevice = alloc_etherdev(0); if (!netdevice) return -ENOMEM; - netdevice->base_addr = dev->hpa; + netdevice->base_addr = dev->hpa.start; netdevice->irq = dev->irq; retval = i82596_probe(netdevice, &dev->dev); diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c index 52f37b424318..558420bc9f88 100644 --- a/drivers/parisc/asp.c +++ b/drivers/parisc/asp.c @@ -77,12 +77,12 @@ asp_init_chip(struct parisc_device *dev) struct gsc_irq gsc_irq; int ret; - asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf; + asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf; asp.name = (asp.version == 1) ? "Asp" : "Cutoff"; asp.hpa = ASP_INTERRUPT_ADDR; printk(KERN_INFO "%s version %d at 0x%lx found.\n", - asp.name, asp.version, dev->hpa); + asp.name, asp.version, dev->hpa.start); /* the IRQ ASP should use */ ret = -EBUSY; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 2bb1889c4c4f..80d0927dc8a4 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1546,7 +1546,7 @@ static int ccio_probe(struct parisc_device *dev) ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn"; - printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa); + printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start); for (i = 0; i < ioc_count; i++) { ioc_p = &(*ioc_p)->next; @@ -1554,7 +1554,7 @@ static int ccio_probe(struct parisc_device *dev) *ioc_p = ioc; ioc->hw_path = dev->hw_path; - ioc->ioc_hpa = (struct ioa_registers *)dev->hpa; + ioc->ioc_regs = ioremap(dev->hpa.start, 4096); ccio_ioc_init(ioc); ccio_init_resources(ioc); hppa_dma_ops = &ccio_ops; diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c index 57e6385976e2..356b8357bccc 100644 --- a/drivers/parisc/ccio-rm-dma.c +++ b/drivers/parisc/ccio-rm-dma.c @@ -167,7 +167,7 @@ ccio_probe(struct parisc_device *dev) { printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME, dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn", - dev->hpa); + dev->hpa.start); /* ** FIXME - should check U2 registers to verify it's really running diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 8c61705e67a5..37820b0ae5ee 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -902,15 +902,15 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp); ** If so, initialize the chip appropriately (card-mode vs bridge mode). ** Much of the initialization is common though. */ -static int __init -dino_driver_callback(struct parisc_device *dev) +static int __init dino_probe(struct parisc_device *dev) { struct dino_device *dino_dev; // Dino specific control struct const char *version = "unknown"; char *name; int is_cujo = 0; struct pci_bus *bus; - + unsigned long hpa = dev->hpa.start; + name = "Dino"; if (is_card_dino(&dev->id)) { version = "3.x (card mode)"; diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 0afeedddf535..6362bf99eff6 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -315,7 +315,7 @@ static int __devinit eisa_probe(struct parisc_device *dev) char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", - name, dev->hpa); + name, dev->hpa.start); eisa_dev.hba.dev = dev; eisa_dev.hba.iommu = ccio_get_iommu(dev); diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index a6eae3e7c0cd..5edf93f80757 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -68,14 +68,14 @@ static int hppb_probe(struct parisc_device *dev) memset(card->next, '\0', sizeof(struct hppb_card)); card = card->next; } - printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa); + printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start); - card->hpa = dev->hpa; + card->hpa = dev->hpa.start; card->mmio_region.name = "HP-PB Bus"; card->mmio_region.flags = IORESOURCE_MEM; - card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW); - card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1; + card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW); + card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1; status = ccio_request_resource(dev, &card->mmio_region); if(status < 0) { diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c index c776c372ae4e..a8c20396ffbe 100644 --- a/drivers/parisc/lasi.c +++ b/drivers/parisc/lasi.c @@ -175,7 +175,7 @@ lasi_init_chip(struct parisc_device *dev) return -ENOMEM; lasi->name = "Lasi"; - lasi->hpa = dev->hpa; + lasi->hpa = dev->hpa.start; /* Check the 4-bit (yes, only 4) version register */ lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf; diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 7fdd80b7eb47..5e495dcbc58a 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1288,7 +1288,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) ** Adjust "window" for this rope. */ rsize /= ROPES_PER_IOC; - r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa); + r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start); r->end = r->start + rsize; } else { r->end = r->start = 0; /* Not enabled. */ @@ -1458,7 +1458,7 @@ lba_driver_probe(struct parisc_device *dev) u32 func_class; void *tmp_obj; char *version; - void __iomem *addr = ioremap(dev->hpa, 4096); + void __iomem *addr = ioremap(dev->hpa.start, 4096); /* Read HW Rev First */ func_class = READ_REG32(addr + LBA_FCLASS); @@ -1476,7 +1476,7 @@ lba_driver_probe(struct parisc_device *dev) } printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xf, dev->hpa); + MODULE_NAME, version, func_class & 0xf, dev->hpa.start); if (func_class < 2) { printk(KERN_WARNING "Can't support LBA older than " @@ -1503,17 +1503,17 @@ lba_driver_probe(struct parisc_device *dev) * but for the mask for func_class. */ printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xff, dev->hpa); + MODULE_NAME, version, func_class & 0xff, dev->hpa.start); cfg_ops = &mercury_cfg_ops; } else { - printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa); + printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start); return -ENODEV; } /* ** Tell I/O SAPIC driver we have a IRQ handler/region. */ - tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE); + tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't ** have an IRT entry will get NULL back from iosapic code. @@ -1635,7 +1635,7 @@ void __init lba_init(void) */ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) { - void __iomem * base_addr = ioremap(lba->hpa, 4096); + void __iomem * base_addr = ioremap(lba->hpa.start, 4096); imask <<= 2; /* adjust for hints - 2 more bits */ diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index a8405f05fb5f..6256ad365d0b 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1600,7 +1600,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset) { - return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE); + return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE); } static void sba_hw_init(struct sba_device *sba_dev) @@ -1978,7 +1978,7 @@ sba_driver_callback(struct parisc_device *dev) u32 func_class; int i; char *version; - void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE); + void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE); sba_dump_ranges(sba_addr); @@ -2020,7 +2020,7 @@ sba_driver_callback(struct parisc_device *dev) } printk(KERN_INFO "%s found %s at 0x%lx\n", - MODULE_NAME, version, dev->hpa); + MODULE_NAME, version, dev->hpa.start); sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL); if (!sba_dev) { diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c index e547d7d024d8..17dce2adf7fe 100644 --- a/drivers/parisc/wax.c +++ b/drivers/parisc/wax.c @@ -81,7 +81,7 @@ wax_init_chip(struct parisc_device *dev) return -ENOMEM; wax->name = "wax"; - wax->hpa = dev->hpa; + wax->hpa = dev->hpa.start; wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */ printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 02d72acd1c89..fde29a75f888 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -359,11 +359,12 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", + dev->hpa.start); return -ENODEV; } - port = dev->hpa + PARPORT_GSC_OFFSET; + port = dev->hpa.start + PARPORT_GSC_OFFSET; /* some older machines with ASP-chip don't support * the enhanced parport modes. diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 123f4933d8f5..8028418b3ad6 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -98,7 +98,7 @@ MODULE_DEVICE_TABLE(parisc, lasi700_ids); static int __init lasi700_probe(struct parisc_device *dev) { - unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET; + unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET; struct NCR_700_Host_Parameters *hostdata; struct Scsi_Host *host; diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 5a51051e31f0..b131432c677d 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -88,7 +88,7 @@ zalon_probe(struct parisc_device *dev) struct gsc_irq gsc_irq; u32 zalon_vers; int error = -ENODEV; - void __iomem *zalon = ioremap(dev->hpa, 4096); + void __iomem *zalon = ioremap(dev->hpa.start, 4096); void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET; static int unit = 0; struct Scsi_Host *host; @@ -127,7 +127,7 @@ zalon_probe(struct parisc_device *dev) device.chip = zalon720_chip; device.host_id = 7; device.dev = &dev->dev; - device.slot.base = dev->hpa + GSC_SCSI_ZALON_OFFSET; + device.slot.base = dev->hpa.start + GSC_SCSI_ZALON_OFFSET; device.slot.base_v = io_port; device.slot.irq = dev->irq; device.differential = 2; diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 431aa5761a7a..abc5a0cfe243 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -42,12 +42,13 @@ serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) { printk(KERN_INFO "Serial: device 0x%lx not configured.\n" - "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa); + "Enable support for Wax, Lasi, Asp or Dino.\n", + dev->hpa.start); } return -ENODEV; } - address = dev->hpa; + address = dev->hpa.start; if (dev->id.sversion != 0x8d) { address += 0x800; } diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index a12005b08bca..009ce83c8ef5 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -444,7 +444,7 @@ static int __init mux_probe(struct parisc_device *dev) unsigned long bytecnt; struct uart_port *port; - status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32); + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); if(status != PDC_OK) { printk(KERN_ERR "Serial mux: Unable to read IODC.\n"); return 1; diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h index cbde8b41c84b..1d247e32a608 100644 --- a/include/asm-parisc/parisc-device.h +++ b/include/asm-parisc/parisc-device.h @@ -1,7 +1,7 @@ #include struct parisc_device { - unsigned long hpa; /* Hard Physical Address */ + struct resource hpa; /* Hard Physical Address */ struct parisc_device_id id; struct parisc_driver *driver; /* Driver for this device */ char name[80]; /* The hardware description */ diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index f560dd8cdb90..8b3ea26469ad 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -852,14 +852,14 @@ snd_harmony_create(snd_card_t *card, memset(&h->pbuf, 0, sizeof(h->pbuf)); memset(&h->cbuf, 0, sizeof(h->cbuf)); - h->hpa = padev->hpa; + h->hpa = padev->hpa.start; h->card = card; h->dev = padev; h->irq = padev->irq; - h->iobase = ioremap_nocache(padev->hpa, HARMONY_SIZE); + h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE); if (h->iobase == NULL) { printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n", - padev->hpa); + padev->hpa.start); err = -EBUSY; goto free_and_ret; } -- cgit v1.2.3 From 64908ad95c34f25849412d6d4735ac10f8fb6575 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:37:20 -0400 Subject: [PARISC] Update sba_iommu from parisc tree revert use of %%sr0 in fdc asm. Thanks to Joel Soete for pointing out this oversight. Signed-off-by: Grant Grundler 2.6.14-rc2-pa3 move "sync" outside the main loop that fills IO Pdir. Signed-off-by: Grant Grundler remove explicit use of sr0 in fdc ops. Thanks to Joel Soete for reminding me were I added those... Signed-off-by: Grant Grundler 2.6.14-rc2-pa2 - make SBA more anal about invalidating pdir entries Previous code cleared the valid flag a pdir entry but it did NOT guarantee this change was visible to the PDIR before writing the PCOM register. Ie the SBA could pick up a stale entry if the write happened to hit the SBA before the cacheline was flushed from the cache. Long term, I think I want to make this a compile time flag. Developement tree should enable anal pdir checking by default and Debian can disable it with either a CONFIG option or one-line patch. fdc/sync options can only negatively affect performance though I haven't measure how much yet. If someone can run netperf TCP_RR across gige and compare -pa1 and -pa2, that would be sufficient. Cleaned up the use of "fdc" to make sure it's using "kernel" space id (specify sr0 but maps to sr4-7). It seems a bit fragile to assume "sr1" gets loaded with KERNEL_SPACE which is how the code works today. Tested on 32 and 64-bit SMP kernels on j6k. Signed-off-by: Grant Grundler remove PDC_NARROW from SBA and document history of PDC_NARROW a bit. It will still show up in an older kernel's .config file. Signed-off-by: Grant Grundler if/ifdef cleanups from Joel Soete. Signed-off-by: Grant Grundler 2.6.12-rc4-pa2 fix 32-bit support for Astro platforms o Since my last SBA code change, SBA could allocate more than 1GB of IOVA space on Astro boxes with more than 1GB of RAM when running 32-bit kernel. This is bad since IOMMU can only talk to the first 1GB at most. Kudos to jejb for quickly spotting that bug. o jejb also noted SBA should *always* reject DMA masks > 32-bits since DMA-mapping.txt indicates caller should try again with 32-bits. o off-by-one error when comparing the mask to IOVA space size. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/parisc/sba_iommu.c | 140 +++++++++++++++++++++++++++++---------------- 1 file changed, 91 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 6256ad365d0b..48591badd4ce 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -91,8 +91,8 @@ extern struct proc_dir_entry * proc_mckinley_root; #define DBG_RES(x...) #endif -#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW) -/* "low end" PA8800 machines use ZX1 chipset */ +#if defined(CONFIG_64BIT) +/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */ #define ZX1_SUPPORT #endif @@ -231,7 +231,7 @@ struct ioc { spinlock_t res_lock; unsigned int res_bitshift; /* from the LEFT! */ unsigned int res_size; /* size of resource map in bytes */ -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT /* FIXME : DMA HINTs not used */ unsigned long hint_mask_pdir; /* bits used for DMA hints */ unsigned int hint_shift_pdir; @@ -294,7 +294,7 @@ static unsigned long piranha_bad_128k = 0; /* Looks nice and keeps the compiler happy */ #define SBA_DEV(d) ((struct sba_device *) (d)) -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT static int reserve_sba_gart = 1; #endif @@ -314,7 +314,7 @@ static int reserve_sba_gart = 1; #define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr) #define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr) -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define READ_REG(addr) READ_REG64(addr) #define WRITE_REG(value, addr) WRITE_REG64(value, addr) #else @@ -324,7 +324,7 @@ static int reserve_sba_gart = 1; #ifdef DEBUG_SBA_INIT -/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */ +/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */ /** * sba_dump_ranges - debugging only - print ranges assigned to this IOA @@ -364,7 +364,7 @@ static void sba_dump_tlb(void __iomem *hpa) #else #define sba_dump_ranges(x) #define sba_dump_tlb(x) -#endif +#endif /* DEBUG_SBA_INIT */ #ifdef ASSERT_PDIR_SANITY @@ -674,7 +674,7 @@ sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size) * ***************************************************************/ -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT #define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir) #endif @@ -743,9 +743,8 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, * (bit #61, big endian), we have to flush and sync every time * IO-PDIR is changed in Ike/Astro. */ - if (ioc_needs_fdc) { - asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr)); - } + if (ioc_needs_fdc) + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); } @@ -769,42 +768,57 @@ static SBA_INLINE void sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) { u32 iovp = (u32) SBA_IOVP(ioc,iova); - - /* Even though this is a big-endian machine, the entries - ** in the iopdir are little endian. That's why we clear the byte - ** at +7 instead of at +0. - */ - int off = PDIR_INDEX(iovp)*sizeof(u64)+7; + u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)]; #ifdef ASSERT_PDIR_SANITY - /* Assert first pdir entry is set */ - if (0x80 != (((u8 *) ioc->pdir_base)[off])) { + /* Assert first pdir entry is set. + ** + ** Even though this is a big-endian machine, the entries + ** in the iopdir are little endian. That's why we look at + ** the byte at +7 instead of at +0. + */ + if (0x80 != (((u8 *) pdir_ptr)[7])) { sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp)); } #endif - if (byte_cnt <= IOVP_SIZE) + if (byte_cnt > IOVP_SIZE) { - iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ +#if 0 + unsigned long entries_per_cacheline = ioc_needs_fdc ? + L1_CACHE_ALIGN(((unsigned long) pdir_ptr)) + - (unsigned long) pdir_ptr; + : 262144; +#endif - /* - ** clear I/O PDIR entry "valid" bit - ** Do NOT clear the rest - save it for debugging. - ** We should only clear bits that have previously - ** been enabled. - */ - ((u8 *)(ioc->pdir_base))[off] = 0; - } else { - u32 t = get_order(byte_cnt) + PAGE_SHIFT; + /* set "size" field for PCOM */ + iovp |= get_order(byte_cnt) + PAGE_SHIFT; - iovp |= t; do { /* clear I/O Pdir entry "valid" bit first */ - ((u8 *)(ioc->pdir_base))[off] = 0; - off += sizeof(u64); + ((u8 *) pdir_ptr)[7] = 0; + if (ioc_needs_fdc) { + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); +#if 0 + entries_per_cacheline = L1_CACHE_SHIFT - 3; +#endif + } + pdir_ptr++; byte_cnt -= IOVP_SIZE; - } while (byte_cnt > 0); - } + } while (byte_cnt > IOVP_SIZE); + } else + iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ + + /* + ** clear I/O PDIR entry "valid" bit. + ** We have to R/M/W the cacheline regardless how much of the + ** pdir entry that we clobber. + ** The rest of the entry would be useful for debugging if we + ** could dump core on HPMC. + */ + ((u8 *) pdir_ptr)[7] = 0; + if (ioc_needs_fdc) + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM); } @@ -819,18 +833,29 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) static int sba_dma_supported( struct device *dev, u64 mask) { struct ioc *ioc; + if (dev == NULL) { printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); BUG(); return(0); } - ioc = GET_IOC(dev); + /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, + * then fall back to 32-bit if that fails. + * We are just "encouraging" 32-bit DMA masks here since we can + * never allow IOMMU bypass unless we add special support for ZX1. + */ + if (mask > ~0U) + return 0; - /* check if mask is > than the largest IO Virt Address */ + ioc = GET_IOC(dev); - return((int) (mask >= (ioc->ibase + - (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); + /* + * check if mask is >= than the current max IO Virt Address + * The max IO Virt address will *always* < 30 bits. + */ + return((int)(mask >= (ioc->ibase - 1 + + (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); } @@ -898,11 +923,17 @@ sba_map_single(struct device *dev, void *addr, size_t size, size -= IOVP_SIZE; pdir_start++; } - /* form complete address */ + + /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + #ifdef ASSERT_PDIR_SANITY sba_check_pdir(ioc,"Check after sba_map_single()"); #endif spin_unlock_irqrestore(&ioc->res_lock, flags); + + /* form complete address */ return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG); } @@ -958,12 +989,19 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, d--; } ioc->saved_cnt = 0; + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ } #else /* DELAYED_RESOURCE_CNT == 0 */ sba_free_range(ioc, iova, size); + + /* If fdc's were issued, force fdc's to be visible now */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ #endif /* DELAYED_RESOURCE_CNT == 0 */ + spin_unlock_irqrestore(&ioc->res_lock, flags); /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support. @@ -1106,6 +1144,10 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, */ filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry); + /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + #ifdef ASSERT_PDIR_SANITY if (sba_check_pdir(ioc,"Check after sba_map_sg()")) { @@ -1234,8 +1276,10 @@ sba_alloc_pdir(unsigned int pdir_size) unsigned long pdir_order = get_order(pdir_size); pdir_base = __get_free_pages(GFP_KERNEL, pdir_order); - if (NULL == (void *) pdir_base) - panic("sba_ioc_init() could not allocate I/O Page Table\n"); + if (NULL == (void *) pdir_base) { + panic("%s() could not allocate I/O Page Table\n", + __FUNCTION__); + } /* If this is not PA8700 (PCX-W2) ** OR newer than ver 2.2 @@ -1353,7 +1397,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) u32 iova_space_mask; u32 iova_space_size; int iov_order, tcnfg; -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT int agp_found = 0; #endif /* @@ -1390,7 +1434,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) DBG_INIT("%s() pdir %p size %x\n", __FUNCTION__, ioc->pdir_base, ioc->pdir_size); -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); @@ -1414,7 +1458,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK); -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* ** Setting the upper bits makes checking for bypass addresses ** a little faster later on. @@ -1447,7 +1491,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) */ WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM); -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT /* ** If an AGP device is present, only use half of the IOV space ** for PCI DMA. Unfortunately we can't know ahead of time @@ -1499,11 +1543,9 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) if (iova_space_size < (1 << (20 - PAGE_SHIFT))) { iova_space_size = 1 << (20 - PAGE_SHIFT); } -#ifdef __LP64__ else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) { iova_space_size = 1 << (30 - PAGE_SHIFT); } -#endif /* ** iova space must be log2() in size. @@ -1529,7 +1571,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) DBG_INIT("%s() pdir %p size %x\n", __FUNCTION__, ioc->pdir_base, pdir_size); -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT /* FIXME : DMA HINTs not used */ ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); -- cgit v1.2.3 From 86a61ee9c9f3d8b632d29e86ac6610c43ebbb4f0 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:37:43 -0400 Subject: [PARISC] Update ccio-dma from parisc tree revert use of %%sr0 in fdc asm. Thanks to Joel Soete for pointing out this oversight. Signed-off-by: Grant Grundler 2.6.14-rc2-pa3 fdc/lci should be %r0 instead 0 for index (PA 1.1 compliance) From: Joel Soete Signed-off-by: Grant Grundler Explain why we need insert_resource() instead of request_resource(). Fundementally, this is more convoluted for ccio driver because of o legacy (HP-PB) transperant bridges. o support for MMIO behind card-mode Dino (PCI) o support for above bridges without ccio in the box SBA driver doesn't have to worry about those issues. Signed-off-by: Grant Grundler Use insert_resource instead of request_resource now that the subdevices will already have their resources claimed Signed-off-by: Matthew Wilcox re-enable use of "inline" for perf critical functions. Signed-off-by: Grant Grundler 2.6.12-rc4-pa5 fix sign extension of MMIO range Fixes the problem of claiming a range that is disabled on 64-bit kernel: ccio_init_resource() claimed CCIO bus address space (ffffffff00000000, ffffffffffffffff) also removes use of __FILE__. Tested on both 32 and 64-bit systems by Joel. From: Joel Soete Signed-off-by: Grant Grundler 2.6.12-rc1-pa7 incorrect BUG_ON in ccio ccio-dma.c line 1317 was preventing K-class with 4GB RAM from booting. Any ccio machine with >=2GB of RAM would have (incorrectly) triggered this. Signed-off-by: Grant Grundler Convert to ioremap and __raw_read/write Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/parisc/ccio-dma.c | 136 ++++++++++++++++++++++++++-------------------- 1 file changed, 78 insertions(+), 58 deletions(-) (limited to 'drivers') diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 80d0927dc8a4..f1c442ab9102 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -100,9 +100,9 @@ #define DBG_RUN_SG(x...) #endif -#define CCIO_INLINE /* inline */ -#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr)) -#define READ_U32(addr) gsc_readl((u32 *)(addr)) +#define CCIO_INLINE inline +#define WRITE_U32(value, addr) __raw_writel(value, addr) +#define READ_U32(addr) __raw_readl(addr) #define U2_IOA_RUNWAY 0x580 #define U2_BC_GSC 0x501 @@ -115,28 +115,28 @@ struct ioa_registers { /* Runway Supervisory Set */ - volatile int32_t unused1[12]; - volatile uint32_t io_command; /* Offset 12 */ - volatile uint32_t io_status; /* Offset 13 */ - volatile uint32_t io_control; /* Offset 14 */ - volatile int32_t unused2[1]; + int32_t unused1[12]; + uint32_t io_command; /* Offset 12 */ + uint32_t io_status; /* Offset 13 */ + uint32_t io_control; /* Offset 14 */ + int32_t unused2[1]; /* Runway Auxiliary Register Set */ - volatile uint32_t io_err_resp; /* Offset 0 */ - volatile uint32_t io_err_info; /* Offset 1 */ - volatile uint32_t io_err_req; /* Offset 2 */ - volatile uint32_t io_err_resp_hi; /* Offset 3 */ - volatile uint32_t io_tlb_entry_m; /* Offset 4 */ - volatile uint32_t io_tlb_entry_l; /* Offset 5 */ - volatile uint32_t unused3[1]; - volatile uint32_t io_pdir_base; /* Offset 7 */ - volatile uint32_t io_io_low_hv; /* Offset 8 */ - volatile uint32_t io_io_high_hv; /* Offset 9 */ - volatile uint32_t unused4[1]; - volatile uint32_t io_chain_id_mask; /* Offset 11 */ - volatile uint32_t unused5[2]; - volatile uint32_t io_io_low; /* Offset 14 */ - volatile uint32_t io_io_high; /* Offset 15 */ + uint32_t io_err_resp; /* Offset 0 */ + uint32_t io_err_info; /* Offset 1 */ + uint32_t io_err_req; /* Offset 2 */ + uint32_t io_err_resp_hi; /* Offset 3 */ + uint32_t io_tlb_entry_m; /* Offset 4 */ + uint32_t io_tlb_entry_l; /* Offset 5 */ + uint32_t unused3[1]; + uint32_t io_pdir_base; /* Offset 7 */ + uint32_t io_io_low_hv; /* Offset 8 */ + uint32_t io_io_high_hv; /* Offset 9 */ + uint32_t unused4[1]; + uint32_t io_chain_id_mask; /* Offset 11 */ + uint32_t unused5[2]; + uint32_t io_io_low; /* Offset 14 */ + uint32_t io_io_high; /* Offset 15 */ }; /* @@ -226,7 +226,7 @@ struct ioa_registers { */ struct ioc { - struct ioa_registers *ioc_hpa; /* I/O MMU base address */ + struct ioa_registers __iomem *ioc_regs; /* I/O MMU base address */ u8 *res_map; /* resource map, bit == pdir entry */ u64 *pdir_base; /* physical base address */ u32 pdir_size; /* bytes, function of IOV Space size */ @@ -595,7 +595,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, ** Grab virtual index [0:11] ** Deposit virt_idx bits into I/O PDIR word */ - asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba)); + asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba)); asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci)); asm volatile ("depw %1,15,12,%0" : "+r" (pa) : "r" (ci)); @@ -613,7 +613,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, ** the real mode coherence index generation of U2, the PDIR entry ** must be flushed to memory to retain coherence." */ - asm volatile("fdc 0(%0)" : : "r" (pdir_ptr)); + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); asm volatile("sync"); } @@ -636,7 +636,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt) byte_cnt += chain_size; while(byte_cnt > chain_size) { - WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command); + WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_regs->io_command); iovp += chain_size; byte_cnt -= chain_size; } @@ -684,7 +684,7 @@ ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) ** Hopefully someone figures out how to patch (NOP) the ** FDC/SYNC out at boot time. */ - asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7])); + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr[7])); iovp += IOVP_SIZE; byte_cnt -= IOVP_SIZE; @@ -1314,14 +1314,13 @@ ccio_ioc_init(struct ioc *ioc) ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64); - BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */ + BUG_ON(ioc->pdir_size > 8 * 1024 * 1024); /* max pdir size <= 8MB */ /* Verify it's a power of two */ BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT)); - DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n", - __FUNCTION__, - ioc->ioc_hpa, + DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n", + __FUNCTION__, ioc->ioc_regs, (unsigned long) num_physpages >> (20 - PAGE_SHIFT), iova_space_size>>20, iov_order + PAGE_SHIFT); @@ -1329,13 +1328,12 @@ ccio_ioc_init(struct ioc *ioc) ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL, get_order(ioc->pdir_size)); if(NULL == ioc->pdir_base) { - panic("%s:%s() could not allocate I/O Page Table\n", __FILE__, - __FUNCTION__); + panic("%s() could not allocate I/O Page Table\n", __FUNCTION__); } memset(ioc->pdir_base, 0, ioc->pdir_size); BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base); - DBG_INIT(" base %p", ioc->pdir_base); + DBG_INIT(" base %p\n", ioc->pdir_base); /* resource map size dictated by pdir_size */ ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3; @@ -1344,8 +1342,7 @@ ccio_ioc_init(struct ioc *ioc) ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL, get_order(ioc->res_size)); if(NULL == ioc->res_map) { - panic("%s:%s() could not allocate resource map\n", __FILE__, - __FUNCTION__); + panic("%s() could not allocate resource map\n", __FUNCTION__); } memset(ioc->res_map, 0, ioc->res_size); @@ -1366,44 +1363,58 @@ ccio_ioc_init(struct ioc *ioc) ** Initialize IOA hardware */ WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift, - &ioc->ioc_hpa->io_chain_id_mask); + &ioc->ioc_regs->io_chain_id_mask); WRITE_U32(virt_to_phys(ioc->pdir_base), - &ioc->ioc_hpa->io_pdir_base); + &ioc->ioc_regs->io_pdir_base); /* ** Go to "Virtual Mode" */ - WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control); + WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_regs->io_control); /* ** Initialize all I/O TLB entries to 0 (Valid bit off). */ - WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m); - WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l); + WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_m); + WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_l); for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) { WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)), - &ioc->ioc_hpa->io_command); + &ioc->ioc_regs->io_command); } } static void -ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr) +ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr) { int result; res->parent = NULL; res->flags = IORESOURCE_MEM; - res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16; - res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1; + /* + * bracing ((signed) ...) are required for 64bit kernel because + * we only want to sign extend the lower 16 bits of the register. + * The upper 16-bits of range registers are hardcoded to 0xffff. + */ + res->start = (unsigned long)((signed) READ_U32(ioaddr) << 16); + res->end = (unsigned long)((signed) (READ_U32(ioaddr + 4) << 16) - 1); res->name = name; + /* + * Check if this MMIO range is disable + */ if (res->end + 1 == res->start) return; - result = request_resource(&iomem_resource, res); + + /* On some platforms (e.g. K-Class), we have already registered + * resources for devices reported by firmware. Some are children + * of ccio. + * "insert" ccio ranges in the mmio hierarchy (/proc/iomem). + */ + result = insert_resource(&iomem_resource, res); if (result < 0) { - printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n", - __FILE__, res->start, res->end); + printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n", + __FUNCTION__, res->start, res->end); } } @@ -1414,9 +1425,8 @@ static void __init ccio_init_resources(struct ioc *ioc) sprintf(name, "GSC Bus [%d/]", ioc->hw_path); - ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low); - ccio_init_resource(res + 1, name, - (unsigned long)&ioc->ioc_hpa->io_io_low_hv); + ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low); + ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv); } static int new_ioc_area(struct resource *res, unsigned long size, @@ -1427,7 +1437,12 @@ static int new_ioc_area(struct resource *res, unsigned long size, res->start = (max - size + 1) &~ (align - 1); res->end = res->start + size; - if (!request_resource(&iomem_resource, res)) + + /* We might be trying to expand the MMIO range to include + * a child device that has already registered it's MMIO space. + * Use "insert" instead of request_resource(). + */ + if (!insert_resource(&iomem_resource, res)) return 0; return new_ioc_area(res, size, min, max - size, align); @@ -1486,15 +1501,15 @@ int ccio_allocate_resource(const struct parisc_device *dev, if (!expand_ioc_area(parent, size, min, max, align)) { __raw_writel(((parent->start)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_low)); + &ioc->ioc_regs->io_io_low); __raw_writel(((parent->end)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_high)); + &ioc->ioc_regs->io_io_high); } else if (!expand_ioc_area(parent + 1, size, min, max, align)) { parent++; __raw_writel(((parent->start)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_low_hv)); + &ioc->ioc_regs->io_io_low_hv); __raw_writel(((parent->end)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_high_hv)); + &ioc->ioc_regs->io_io_high_hv); } else { return -EBUSY; } @@ -1521,7 +1536,12 @@ int ccio_request_resource(const struct parisc_device *dev, return -EBUSY; } - return request_resource(parent, res); + /* "transparent" bus bridges need to register MMIO resources + * firmware assigned them. e.g. children of hppb.c (e.g. K-class) + * registered their resources in the PDC "bus walk" (See + * arch/parisc/kernel/inventory.c). + */ + return insert_resource(parent, res); } /** -- cgit v1.2.3 From 92b919fe46509820c639a08962cbf78bc8d227d9 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:38:23 -0400 Subject: [PARISC] Update dino from parisc tree Fix card-mode Dino crashes on 725 (and probably other Snake) systems. Dino was coming up in fatal mode after a warm reboot. Resetting Dino brings it out of fatal mode, so do that if the status register indicates we're in fatal mode. Since this was never observed on any later systems, I presume firmware does this for us on those. Signed-off-by: Matthew Wilcox Add debug statements in the cfg_read and cfg_write functions Fix debug statements from the IRQ overhaul last winter Rename dino_driver_callback() to dino_probe() Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/parisc/dino.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 37820b0ae5ee..5ab75334c579 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -178,6 +178,8 @@ static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base_addr = d->hba.base_addr; unsigned long flags; + DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where, + size); spin_lock_irqsave(&d->dinosaur_pen, flags); /* tell HW which CFG address */ @@ -211,6 +213,8 @@ static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base_addr = d->hba.base_addr; unsigned long flags; + DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where, + size); spin_lock_irqsave(&d->dinosaur_pen, flags); /* avoid address stepping feature */ @@ -295,7 +299,7 @@ static void dino_disable_irq(unsigned int irq) struct dino_device *dino_dev = irq_desc[irq].handler_data; int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq); - DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq); + DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); /* Clear the matching bit in the IMR register */ dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq)); @@ -308,7 +312,7 @@ static void dino_enable_irq(unsigned int irq) int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq); u32 tmp; - DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq); + DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); /* ** clear pending IRQ bits @@ -490,7 +494,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr) if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB))) break; } - DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n", + DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n", i, res->start, base_addr + DINO_IO_ADDR_EN); __raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN); } @@ -683,6 +687,14 @@ static void __init dino_card_init(struct dino_device *dino_dev) { u32 brdg_feat = 0x00784e05; + unsigned long status; + + status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS); + if (status & 0x0000ff80) { + __raw_writel(0x00000005, + dino_dev->hba.base_addr+DINO_IO_COMMAND); + udelay(1); + } __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK); __raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN); @@ -928,11 +940,11 @@ static int __init dino_probe(struct parisc_device *dev) } } - printk("%s version %s found at 0x%lx\n", name, version, dev->hpa); + printk("%s version %s found at 0x%lx\n", name, version, hpa); - if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) { + if (!request_mem_region(hpa, PAGE_SIZE, name)) { printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n", - dev->hpa); + hpa); return 1; } @@ -940,12 +952,12 @@ static int __init dino_probe(struct parisc_device *dev) if (is_cujo && dev->id.hversion_rev == 1) { #ifdef CONFIG_IOMMU_CCIO printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n"); - if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) { + if (hpa == (unsigned long)CUJO_RAVEN_ADDR) { ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE); - } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) { + } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) { ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE); } else { - printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa); + printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa); } #endif } else if (!is_cujo && !is_card_dino(&dev->id) && @@ -970,7 +982,7 @@ static int __init dino_probe(struct parisc_device *dev) memset(dino_dev, 0, sizeof(struct dino_device)); dino_dev->hba.dev = dev; - dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */ + dino_dev->hba.base_addr = ioremap(hpa, 4096); dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */ spin_lock_init(&dino_dev->dinosaur_pen); dino_dev->hba.iommu = ccio_get_iommu(dev); -- cgit v1.2.3 From b2c1fe81df7471de9f7e2918877ac04ec9cde35f Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:39:43 -0400 Subject: [PARISC] Allow STI_CONSOLE access to some FONTS add || STI_CONSOLE to some of the basic FONTs. May need to get at least one of them to default to "Y" for parisc. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/video/console/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index eb83a7874c71..7e731691e2a9 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -110,7 +110,7 @@ config STI_CONSOLE config FONTS bool "Select compiled-in fonts" - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE help Say Y here if you would like to use fonts other than the default your frame buffer console usually use. @@ -123,7 +123,7 @@ config FONTS config FONT_8x8 bool "VGA 8x8 font" if FONTS - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one @@ -137,7 +137,7 @@ config FONT_8x8 config FONT_8x16 bool "VGA 8x16 font" if FONTS - depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON + depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one @@ -147,7 +147,7 @@ config FONT_8x16 config FONT_6x11 bool "Mac console 6x11 font (not supported by all drivers)" if FONTS - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS && MAC help Small console font with Macintosh-style high-half glyphs. Some Mac -- cgit v1.2.3 From 951a0150135c46c7791d68e0d1112900d99302d7 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:41:49 -0400 Subject: [PARISC] Reorganize sticore probe routine to be a little less convoluted Fix some whitespace issues Reorganise parisc_device probe routine to be a little less convoluted Use ->hpa.start instead of ->hpa Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/video/console/sticore.c | 126 +++++++++++++++++++--------------------- 1 file changed, 60 insertions(+), 66 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index d940f605acb6..a7bcd17112c0 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -511,12 +511,12 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) struct sti_cooked_font *cooked_font; if (!fbfont_name || !strlen(fbfont_name)) - return NULL; + return NULL; fbfont = find_font(fbfont_name); if (!fbfont) - fbfont = get_default_font(1024,768); + fbfont = get_default_font(1024,768); if (!fbfont) - return NULL; + return NULL; DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n", fbfont->width, fbfont->height, fbfont->name)); @@ -527,7 +527,7 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) nf = kmalloc(size, GFP_KERNEL); if (!nf) - return NULL; + return NULL; memset(nf, 0, size); nf->first_char = 0; @@ -546,8 +546,8 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL); if (!cooked_font) { - kfree(nf); - return NULL; + kfree(nf); + return NULL; } cooked_font->raw = nf; @@ -595,7 +595,7 @@ sti_select_font(struct sti_cooked_rom *rom, static void __init sti_dump_rom(struct sti_rom *rom) { - printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", + printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", rom->graphics_id[0], rom->graphics_id[1], rom->revno[0] >> 4, @@ -651,15 +651,16 @@ sti_search_font(struct sti_cooked_rom *rom, int height, int width) struct sti_cooked_font *font; int i = 0; - for(font = rom->font_start; font; font = font->next_font, i++) { - if((font->raw->width == width) && (font->raw->height == height)) + for (font = rom->font_start; font; font = font->next_font, i++) { + if ((font->raw->width == width) && + (font->raw->height == height)) return i; } return 0; } -#define BMODE_RELOCATE(offset) offset = (offset) / 4; -#define BMODE_LAST_ADDR_OFFS 0x50 +#define BMODE_RELOCATE(offset) offset = (offset) / 4; +#define BMODE_LAST_ADDR_OFFS 0x50 static void * __init sti_bmode_font_raw(struct sti_cooked_font *f) @@ -700,35 +701,35 @@ sti_get_bmode_rom (unsigned long address) { struct sti_rom *raw; u32 size; - struct sti_rom_font *raw_font, *font_start; - + struct sti_rom_font *raw_font, *font_start; + sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size); - - size = (size+3) / 4; + + size = (size+3) / 4; raw = kmalloc(size, GFP_KERNEL); if (raw) { - sti_bmode_rom_copy(address, size, raw); - memmove (&raw->res004, &raw->type[0], 0x3c); - raw->type[3] = raw->res004; + sti_bmode_rom_copy(address, size, raw); + memmove (&raw->res004, &raw->type[0], 0x3c); + raw->type[3] = raw->res004; - BMODE_RELOCATE (raw->region_list); - BMODE_RELOCATE (raw->font_start); + BMODE_RELOCATE (raw->region_list); + BMODE_RELOCATE (raw->font_start); - BMODE_RELOCATE (raw->init_graph); - BMODE_RELOCATE (raw->state_mgmt); - BMODE_RELOCATE (raw->font_unpmv); - BMODE_RELOCATE (raw->block_move); - BMODE_RELOCATE (raw->inq_conf); + BMODE_RELOCATE (raw->init_graph); + BMODE_RELOCATE (raw->state_mgmt); + BMODE_RELOCATE (raw->font_unpmv); + BMODE_RELOCATE (raw->block_move); + BMODE_RELOCATE (raw->inq_conf); - raw_font = ((void *)raw) + raw->font_start; - font_start = raw_font; + raw_font = ((void *)raw) + raw->font_start; + font_start = raw_font; - while (raw_font->next_font) { - BMODE_RELOCATE (raw_font->next_font); - raw_font = ((void *)font_start) + raw_font->next_font; - } + while (raw_font->next_font) { + BMODE_RELOCATE (raw_font->next_font); + raw_font = ((void *)font_start) + raw_font->next_font; + } } - return raw; + return raw; } struct sti_rom * __init @@ -736,15 +737,15 @@ sti_get_wmode_rom (unsigned long address) { struct sti_rom *raw; unsigned long size; - + /* read the ROM size directly from the struct in ROM */ size = gsc_readl(address + offsetof(struct sti_rom,last_addr)); raw = kmalloc(size, GFP_KERNEL); - if(raw) - sti_rom_copy(address, size, raw); + if (raw) + sti_rom_copy(address, size, raw); - return raw; + return raw; } int __init @@ -757,14 +758,14 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address) if (!cooked) goto out_err; - if (wordmode) - raw = sti_get_wmode_rom (address); - else - raw = sti_get_bmode_rom (address); + if (wordmode) + raw = sti_get_wmode_rom (address); + else + raw = sti_get_bmode_rom (address); + + if (!raw) + goto out_err; - if (!raw) - goto out_err; - if (!sti_cook_fonts(cooked, raw)) { printk(KERN_ERR "No font found for STI at %08lx\n", address); goto out_err; @@ -787,7 +788,7 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address) sti->font_width = sti->font->raw->width; sti->font_height = sti->font->raw->height; if (!wordmode) - sti->font->raw = sti_bmode_font_raw(sti->font); + sti->font->raw = sti_bmode_font_raw(sti->font); sti->sti_mem_request = raw->sti_mem_req; sti->graphics_id[0] = raw->graphics_id[0]; @@ -811,16 +812,16 @@ sti_try_rom_generic(unsigned long address, unsigned long hpa, struct pci_dev *pd u32 sig; if (num_sti_roms >= MAX_STI_ROMS) { - printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); - return NULL; + printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); + return NULL; } sti = kmalloc(sizeof(*sti), GFP_KERNEL); if (!sti) { - printk(KERN_ERR "Not enough memory !\n"); - return NULL; + printk(KERN_ERR "Not enough memory !\n"); + return NULL; } - + memset(sti, 0, sizeof(*sti)); spin_lock_init(&sti->lock); @@ -932,28 +933,21 @@ static void __init sticore_check_for_default_sti(struct sti_struct *sti, char *p */ static int __init sticore_pa_init(struct parisc_device *dev) { - unsigned long rom = 0; char pa_path[21]; struct sti_struct *sti = NULL; - - if(dev->num_addrs) { - rom = dev->addr[0]; - } - if (!rom) { - rom = dev->hpa; - DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa)); - sti = sti_try_rom_generic(rom, dev->hpa, NULL); - rom = PAGE0->proc_sti; - } - if (!sti) { - DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa)); - sti = sti_try_rom_generic(rom, dev->hpa, NULL); - } + int hpa = dev->hpa.start; + + if (dev->num_addrs && dev->addr[0]) + sti = sti_try_rom_generic(dev->addr[0], hpa, NULL); + if (!sti) + sti = sti_try_rom_generic(hpa, hpa, NULL); + if (!sti) + sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL); if (!sti) return 1; - + print_pa_hwpath(dev, pa_path); - sticore_check_for_default_sti (sti, pa_path); + sticore_check_for_default_sti(sti, pa_path); return 0; } -- cgit v1.2.3 From 3499495205a676d85fcc2f3c28e35ec9b43c47e3 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:46:18 -0400 Subject: [PARISC] Use work queue in LED/LCD driver instead of tasklet. 2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet. Main advantage is it allows use of msleep() in the led_LCD_driver to "atomically" perform two MMIO writes (CMD, then DATA). Lead to nice cleanup of the main led_work_func() and led_LCD_driver(). Kudos to David for being persistent. From: David Pye Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/time.c | 8 -- drivers/parisc/led.c | 225 +++++++++++++++++++++++----------------------- include/asm-parisc/led.h | 3 - 3 files changed, 112 insertions(+), 124 deletions(-) (limited to 'drivers') diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 163cdf39be20..bc979e1abdec 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -89,14 +89,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } -#ifdef CONFIG_CHASSIS_LCD_LED - /* Only schedule the led tasklet on cpu 0, and only if it - * is enabled. - */ - if (cpu == 0 && !atomic_read(&led_tasklet.count)) - tasklet_schedule(&led_tasklet); -#endif - /* check soft power switch status */ if (cpu == 0 && !atomic_read(&power_tasklet.count)) tasklet_schedule(&power_tasklet); diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c index 286902298e33..95bd07b8b61b 100644 --- a/drivers/parisc/led.c +++ b/drivers/parisc/led.c @@ -18,6 +18,9 @@ * Changes: * - Audit copy_from_user in led_proc_write. * Daniele Bellucci + * - Switch from using a tasklet to a work queue, so the led_LCD_driver + * can sleep. + * David Pye */ #include @@ -37,6 +40,7 @@ #include #include #include +#include #include #include #include @@ -47,25 +51,30 @@ #include /* The control of the LEDs and LCDs on PARISC-machines have to be done - completely in software. The necessary calculations are done in a tasklet - which is scheduled at every timer interrupt and since the calculations - may consume relatively much CPU-time some of the calculations can be + completely in software. The necessary calculations are done in a work queue + task which is scheduled regularly, and since the calculations may consume a + relatively large amount of CPU time, some of the calculations can be turned off with the following variables (controlled via procfs) */ static int led_type = -1; -static int led_heartbeat = 1; -static int led_diskio = 1; -static int led_lanrxtx = 1; +static unsigned char lastleds; /* LED state from most recent update */ +static unsigned int led_heartbeat = 1; +static unsigned int led_diskio = 1; +static unsigned int led_lanrxtx = 1; static char lcd_text[32]; static char lcd_text_default[32]; + +static struct workqueue_struct *led_wq; +static void led_work_func(void *); +static DECLARE_WORK(led_task, led_work_func, NULL); + #if 0 #define DPRINTK(x) printk x #else #define DPRINTK(x) #endif - struct lcd_block { unsigned char command; /* stores the command byte */ unsigned char on; /* value for turning LED on */ @@ -116,12 +125,27 @@ lcd_info __attribute__((aligned(8))) = #define LCD_DATA_REG lcd_info.lcd_data_reg_addr #define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */ +#define LED_HASLCD 1 +#define LED_NOLCD 0 + +/* The workqueue must be created at init-time */ +static int start_task(void) +{ + /* Display the default text now */ + if (led_type == LED_HASLCD) lcd_print( lcd_text_default ); + + /* Create the work queue and queue the LED task */ + led_wq = create_singlethread_workqueue("led_wq"); + queue_work(led_wq, &led_task); + + return 0; +} + +device_initcall(start_task); /* ptr to LCD/LED-specific function */ static void (*led_func_ptr) (unsigned char); -#define LED_HASLCD 1 -#define LED_NOLCD 0 #ifdef CONFIG_PROC_FS static int led_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data) @@ -286,52 +310,35 @@ static void led_LASI_driver(unsigned char leds) /* ** ** led_LCD_driver() - ** - ** The logic of the LCD driver is, that we write at every scheduled call - ** only to one of LCD_CMD_REG _or_ LCD_DATA_REG - registers. - ** That way we don't need to let this tasklet busywait for min_cmd_delay - ** milliseconds. - ** - ** TODO: check the value of "min_cmd_delay" against the value of HZ. ** */ static void led_LCD_driver(unsigned char leds) { - static int last_index; /* 0:heartbeat, 1:disk, 2:lan_in, 3:lan_out */ - static int last_was_cmd;/* 0: CMD was written last, 1: DATA was last */ - struct lcd_block *block_ptr; - int value; - - switch (last_index) { - case 0: block_ptr = &lcd_info.heartbeat; - value = leds & LED_HEARTBEAT; - break; - case 1: block_ptr = &lcd_info.disk_io; - value = leds & LED_DISK_IO; - break; - case 2: block_ptr = &lcd_info.lan_rcv; - value = leds & LED_LAN_RCV; - break; - case 3: block_ptr = &lcd_info.lan_tx; - value = leds & LED_LAN_TX; - break; - default: /* should never happen: */ - return; - } - - if (last_was_cmd) { - /* write the value to the LCD data port */ - gsc_writeb( value ? block_ptr->on : block_ptr->off, LCD_DATA_REG ); - } else { - /* write the command-byte to the LCD command register */ - gsc_writeb( block_ptr->command, LCD_CMD_REG ); - } + static int i; + static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO, + LED_LAN_RCV, LED_LAN_TX }; - /* now update the vars for the next interrupt iteration */ - if (++last_was_cmd == 2) { /* switch between cmd & data */ - last_was_cmd = 0; - if (++last_index == 4) - last_index = 0; /* switch back to heartbeat index */ + static struct lcd_block * blockp[4] = { + &lcd_info.heartbeat, + &lcd_info.disk_io, + &lcd_info.lan_rcv, + &lcd_info.lan_tx + }; + + /* Convert min_cmd_delay to milliseconds */ + unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000); + + for (i=0; i<4; ++i) + { + if ((leds & mask[i]) != (lastleds & mask[i])) + { + gsc_writeb( blockp[i]->command, LCD_CMD_REG ); + msleep(msec_cmd_delay); + + gsc_writeb( leds & mask[i] ? blockp[i]->on : + blockp[i]->off, LCD_DATA_REG ); + msleep(msec_cmd_delay); + } } } @@ -356,7 +363,7 @@ static __inline__ int led_get_net_activity(void) rx_total = tx_total = 0; - /* we are running as tasklet, so locking dev_base + /* we are running as a workqueue task, so locking dev_base * for reading should be OK */ read_lock(&dev_base_lock); rcu_read_lock(); @@ -405,7 +412,7 @@ static __inline__ int led_get_diskio_activity(void) static unsigned long last_pgpgin, last_pgpgout; struct page_state pgstat; int changed; - + get_full_page_state(&pgstat); /* get no of sectors in & out */ /* Just use a very simple calculation here. Do not care about overflow, @@ -413,86 +420,70 @@ static __inline__ int led_get_diskio_activity(void) changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout); last_pgpgin = pgstat.pgpgin; last_pgpgout = pgstat.pgpgout; - + return (changed ? LED_DISK_IO : 0); } /* - ** led_tasklet_func() + ** led_work_func() ** - ** is scheduled at every timer interrupt from time.c and - ** updates the chassis LCD/LED + ** manages when and which chassis LCD/LED gets updated TODO: - display load average (older machines like 715/64 have 4 "free" LED's for that) - optimizations */ -#define HEARTBEAT_LEN (HZ*6/100) -#define HEARTBEAT_2ND_RANGE_START (HZ*22/100) +#define HEARTBEAT_LEN (HZ*10/100) +#define HEARTBEAT_2ND_RANGE_START (HZ*28/100) #define HEARTBEAT_2ND_RANGE_END (HEARTBEAT_2ND_RANGE_START + HEARTBEAT_LEN) -#define NORMALIZED_COUNT(count) (count/(HZ/100)) +#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000)) -static void led_tasklet_func(unsigned long unused) +static void led_work_func (void *unused) { - static unsigned char lastleds; - unsigned char currentleds; /* stores current value of the LEDs */ - static unsigned long count; /* static incremented value, not wrapped */ + static unsigned long last_jiffies; static unsigned long count_HZ; /* counter in range 0..HZ */ + unsigned char currentleds = 0; /* stores current value of the LEDs */ /* exit if not initialized */ if (!led_func_ptr) return; - /* increment the local counters */ - ++count; - if (++count_HZ == HZ) + /* increment the heartbeat timekeeper */ + count_HZ += jiffies - last_jiffies; + last_jiffies = jiffies; + if (count_HZ >= HZ) count_HZ = 0; - currentleds = lastleds; - - if (led_heartbeat) - { - /* flash heartbeat-LED like a real heart (2 x short then a long delay) */ - if (count_HZ=HEARTBEAT_2ND_RANGE_START && count_HZ= HEARTBEAT_2ND_RANGE_START && + count_HZ < HEARTBEAT_2ND_RANGE_END)) + currentleds |= LED_HEARTBEAT; } - /* avoid to calculate diskio-stats at same irq as netio-stats */ - if (led_diskio && (NORMALIZED_COUNT(count) & 7) == 0) - { - currentleds &= ~LED_DISK_IO; - currentleds |= led_get_diskio_activity(); - } + if (likely(led_lanrxtx)) currentleds |= led_get_net_activity(); + if (likely(led_diskio)) currentleds |= led_get_diskio_activity(); /* blink all LEDs twice a second if we got an Oops (HPMC) */ - if (oops_in_progress) { + if (unlikely(oops_in_progress)) currentleds = (count_HZ<=(HZ/2)) ? 0 : 0xff; - } - - /* update the LCD/LEDs */ - if (currentleds != lastleds) { - led_func_ptr(currentleds); - lastleds = currentleds; - } -} -/* main led tasklet struct (scheduled from time.c) */ -DECLARE_TASKLET_DISABLED(led_tasklet, led_tasklet_func, 0); + if (currentleds != lastleds) + { + led_func_ptr(currentleds); /* Update the LCD/LEDs */ + lastleds = currentleds; + } + queue_delayed_work(led_wq, &led_task, LED_UPDATE_INTERVAL); +} /* ** led_halt() @@ -522,9 +513,13 @@ static int led_halt(struct notifier_block *nb, unsigned long event, void *buf) default: return NOTIFY_DONE; } - /* completely stop the LED/LCD tasklet */ - tasklet_disable(&led_tasklet); - + /* Cancel the work item and delete the queue */ + if (led_wq) { + cancel_rearming_delayed_workqueue(led_wq, &led_task); + destroy_workqueue(led_wq); + led_wq = NULL; + } + if (lcd_info.model == DISPLAY_MODEL_LCD) lcd_print(txt); else @@ -559,7 +554,6 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d printk(KERN_INFO "LCD display at %lx,%lx registered\n", LCD_CMD_REG , LCD_DATA_REG); led_func_ptr = led_LCD_driver; - lcd_print( lcd_text_default ); led_type = LED_HASLCD; break; @@ -589,9 +583,11 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d initialized++; register_reboot_notifier(&led_notifier); - /* start the led tasklet for the first time */ - tasklet_enable(&led_tasklet); - + /* Ensure the work is queued */ + if (led_wq) { + queue_work(led_wq, &led_task); + } + return 0; } @@ -626,8 +622,8 @@ void __init register_led_regions(void) ** lcd_print() ** ** Displays the given string on the LCD-Display of newer machines. - ** lcd_print() disables the timer-based led tasklet during its - ** execution and enables it afterwards again. + ** lcd_print() disables/enables the timer-based led work queue to + ** avoid a race condition while writing the CMD/DATA register pair. ** */ int lcd_print( char *str ) @@ -637,12 +633,13 @@ int lcd_print( char *str ) if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD) return 0; - /* temporarily disable the led tasklet */ - tasklet_disable(&led_tasklet); + /* temporarily disable the led work task */ + if (led_wq) + cancel_rearming_delayed_workqueue(led_wq, &led_task); /* copy display string to buffer for procfs */ strlcpy(lcd_text, str, sizeof(lcd_text)); - + /* Set LCD Cursor to 1st character */ gsc_writeb(lcd_info.reset_cmd1, LCD_CMD_REG); udelay(lcd_info.min_cmd_delay); @@ -656,8 +653,10 @@ int lcd_print( char *str ) udelay(lcd_info.min_cmd_delay); } - /* re-enable the led tasklet */ - tasklet_enable(&led_tasklet); + /* re-queue the work */ + if (led_wq) { + queue_work(led_wq, &led_task); + } return lcd_info.lcd_width; } diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h index 1ac8ab6c580d..efadfd543ec6 100644 --- a/include/asm-parisc/led.h +++ b/include/asm-parisc/led.h @@ -23,9 +23,6 @@ #define LED_CMD_REG_NONE 0 /* NULL == no addr for the cmd register */ -/* led tasklet struct */ -extern struct tasklet_struct led_tasklet; - /* register_led_driver() */ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg); -- cgit v1.2.3 From 3aa0862ce7c120e035bc2aa25997fd000d964d6e Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:47:04 -0400 Subject: [PARISC] Minor iosapic.c cleanup minor cleanup: qualify constant with "UL" Acked-by: "Hmamouche, Youssef" Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/parisc/iosapic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 7a57c1b8373f..a39fbfef789a 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -244,7 +244,7 @@ static struct irt_entry *iosapic_alloc_irt(int num_entries) * 4-byte alignment on 32-bit kernels */ a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL); - a = (a + 7) & ~7; + a = (a + 7UL) & ~7UL; return (struct irt_entry *)a; } -- cgit v1.2.3 From 7efe1611b2db9025ffc52a686897ab91820caeb4 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Oct 2005 22:48:03 -0400 Subject: [PARISC] Initialize serial spinlocks in superio.c git commit 976ecd12b8144d066a23fe97c6fbfc1ac8470af7 changed our locking characteristics, and put the onus of spin_lock_init on superio.c. Signed-off-by: Kyle McMartin --- drivers/parisc/superio.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index e0efed796b92..bab3bcabcb6e 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -11,6 +11,7 @@ * (C) Copyright 2000 Alex deVries * (C) Copyright 2001 John Marvin * (C) Copyright 2003 Grant Grundler + * (C) Copyright 2005 Kyle McMartin * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -405,6 +406,7 @@ static void __devinit superio_serial_init(void) serial[0].iobase = sio_dev.sp1_base; serial[0].irq = SP1_IRQ; + spin_lock_init(&serial[0].lock); retval = early_serial_setup(&serial[0]); if (retval < 0) { @@ -414,6 +416,7 @@ static void __devinit superio_serial_init(void) serial[1].iobase = sio_dev.sp2_base; serial[1].irq = SP2_IRQ; + spin_lock_init(&serial[1].lock); retval = early_serial_setup(&serial[1]); if (retval < 0) -- cgit v1.2.3 From c2709020adb442f7d25f0805af08a3b6cfedd7be Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Fri, 21 Oct 2005 22:55:15 -0400 Subject: [PARISC] Add NETPOLL support to lasi_82596 add netpoll support Patch by Sven Schnelle Signed-off-by: Sven Schnelle Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- drivers/net/lasi_82596.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index a63d8a317d9e..f7b7238d8352 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -415,6 +415,10 @@ static int rx_ring_size = RX_RING_SIZE; static int ticks_limit = 100; static int max_cmd_backlog = TX_RING_SIZE-1; +#ifdef CONFIG_NET_POLL_CONTROLLER +static void i596_poll_controller(struct net_device *dev); +#endif + static inline void CA(struct net_device *dev) { @@ -636,11 +640,11 @@ static int init_i596_mem(struct net_device *dev) disable_irq(dev->irq); /* disable IRQs from LAN */ DEB(DEB_INIT, - printk("RESET 82596 port: %p (with IRQ %d disabled)\n", - (void*)(dev->base_addr + PA_I82596_RESET), + printk("RESET 82596 port: %lx (with IRQ %d disabled)\n", + (dev->base_addr + PA_I82596_RESET), dev->irq)); - gsc_writel(0, (void*)(dev->base_addr + PA_I82596_RESET)); /* Hard Reset */ + gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */ udelay(100); /* Wait 100us - seems to help */ /* change the scp address */ @@ -1209,6 +1213,9 @@ static int __devinit i82596_probe(struct net_device *dev, dev->set_multicast_list = set_multicast_list; dev->tx_timeout = i596_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = i596_poll_controller; +#endif dev->priv = (void *)(dev->mem_start); @@ -1242,6 +1249,14 @@ static int __devinit i82596_probe(struct net_device *dev, return 0; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void i596_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + i596_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs) { -- cgit v1.2.3 From abff75439fd6e9b5774e5984d4c3b3b59cb3038b Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:57:13 -0400 Subject: [PARISC] Avoid use of floating point in the kernel don't use *printf %f in the kernel, mm'kay? Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- drivers/parisc/pdc_stable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 67c8f3b44848..273a74179720 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -536,7 +536,7 @@ pdcs_info_read(struct subsystem *entry, char *buf) out += sprintf(out, "Memory tested: "); if ((result & 0x0F) < 0x0E) - out += sprintf(out, "%.3f MB", 0.256*(1<<(result & 0x0F))); + out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256); else out += sprintf(out, "All"); out += sprintf(out, "\n"); -- cgit v1.2.3 From 27ee073cd2f72aa794299ef1ead31072f5176533 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:57:43 -0400 Subject: [PARISC] Update scsi drivers from parisc tree Fix lasi700 for James's ioread*be() changes Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/scsi/lasi700.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 8028418b3ad6..459a4daebece 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -125,8 +125,6 @@ lasi700_probe(struct parisc_device *dev) hostdata->dmode_extra = DMODE_FC2; } - NCR_700_set_mem_mapped(hostdata); - host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev); if (!host) goto out_kfree; -- cgit v1.2.3 From ae8c75c1c47029a64976690c37336a2be6b49778 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:58:03 -0400 Subject: [PARISC] Fix mux.c driver Missing spin_lock_init() made the Mux driver hang on SMP systems. Fix up users of ->hpa to use ->hpa.start instead Remove warning in 8250_gsc.c by eliminating serial_line_nr Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/serial/8250_gsc.c | 1 - drivers/serial/mux.c | 7 +++++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index abc5a0cfe243..8b4947933d9b 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -29,7 +29,6 @@ static int __init serial_init_chip(struct parisc_device *dev) { - static int serial_line_nr; struct uart_port port; unsigned long address; int err; diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 009ce83c8ef5..660bae5ba179 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -27,6 +27,7 @@ #include /* for udelay */ #include #include +#include #include #ifdef CONFIG_MAGIC_SYSRQ @@ -469,16 +470,18 @@ static int __init mux_probe(struct parisc_device *dev) for(i = 0; i < ports; ++i, ++port_cnt) { port = &mux_ports[port_cnt]; port->iobase = 0; - port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET); + port->mapbase = dev->hpa.start + MUX_OFFSET + + (i * MUX_LINE_OFFSET); port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); port->iotype = SERIAL_IO_MEM; port->type = PORT_MUX; - port->irq = SERIAL_IRQ_NONE; + port->irq = NO_IRQ; port->uartclk = 0; port->fifosize = MUX_FIFO_SIZE; port->ops = &mux_pops; port->flags = UPF_BOOT_AUTOCONF; port->line = port_cnt; + spin_lock_init(&port->lock); status = uart_add_one_port(&mux_driver, port); BUG_ON(status); } -- cgit v1.2.3 From 6ab0f5cd364476fe5cb329fd46ee41bea6d4c69c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:58:51 -0400 Subject: [PARISC] Update parisc specific input code from parisc tree Update drivers to new input layer changes. Signed-off-by: Helge Deller Signed-off-by: Matthew Wilcox Reorder code in gscps2_interrupt() and only enable ports when opened. This fixes issues with hangs booting an SMP kernel on my C360. Previously serio_interrupt() could be called before the lock in struct serio was initialised. Signed-off-by: Richard Hirst Signed-off-by: Kyle McMartin --- drivers/input/keyboard/hil_kbd.c | 28 ++- drivers/input/keyboard/hilkbd.c | 2 +- drivers/input/mouse/hil_ptr.c | 33 ++- drivers/input/serio/gscps2.c | 13 +- drivers/input/serio/hil_mlc.c | 14 +- include/linux/hil.h | 483 +++++++++++++++++++++++++++++++++++++++ include/linux/hil_mlc.h | 168 ++++++++++++++ include/linux/hp_sdc.h | 300 ++++++++++++++++++++++++ include/linux/input.h | 1 + 9 files changed, 1011 insertions(+), 31 deletions(-) create mode 100644 include/linux/hil.h create mode 100644 include/linux/hil_mlc.h create mode 100644 include/linux/hp_sdc.h (limited to 'drivers') diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index ef78bffed5e7..0a90962c38e7 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -204,7 +204,7 @@ static irqreturn_t hil_kbd_interrupt(struct serio *serio, hil_packet packet; int idx; - kbd = (struct hil_kbd *)serio->private; + kbd = serio_get_drvdata(serio); if (kbd == NULL) { BUG(); return IRQ_HANDLED; @@ -234,7 +234,7 @@ static void hil_kbd_disconnect(struct serio *serio) { struct hil_kbd *kbd; - kbd = (struct hil_kbd *)serio->private; + kbd = serio_get_drvdata(serio); if (kbd == NULL) { BUG(); return; @@ -245,20 +245,20 @@ static void hil_kbd_disconnect(struct serio *serio) kfree(kbd); } -static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv) +static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) { struct hil_kbd *kbd; uint8_t did, *idd; int i; - if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return; - - if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return; + kbd = kmalloc(sizeof(*kbd), GFP_KERNEL); + if (!kbd) + return -ENOMEM; memset(kbd, 0, sizeof(struct hil_kbd)); if (serio_open(serio, drv)) goto bail0; - serio->private = kbd; + serio_set_drvdata(serio, kbd); kbd->serio = serio; kbd->dev.private = kbd; @@ -342,19 +342,31 @@ static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv) down(&(kbd->sem)); up(&(kbd->sem)); - return; + return 0; bail1: serio_close(serio); bail0: kfree(kbd); + serio_set_drvdata(serio, NULL); + return -EIO; } +static struct serio_device_id hil_kbd_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; struct serio_driver hil_kbd_serio_drv = { .driver = { .name = "hil_kbd", }, .description = "HP HIL keyboard driver", + .id_table = hil_kbd_ids, .connect = hil_kbd_connect, .disconnect = hil_kbd_disconnect, .interrupt = hil_kbd_interrupt diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index e7a1e14f8b0c..e95bc052e32a 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c index bc22849c6c79..c2bf2ed07dc6 100644 --- a/drivers/input/mouse/hil_ptr.c +++ b/drivers/input/mouse/hil_ptr.c @@ -196,7 +196,7 @@ static irqreturn_t hil_ptr_interrupt(struct serio *serio, hil_packet packet; int idx; - ptr = (struct hil_ptr *)serio->private; + ptr = serio_get_drvdata(serio); if (ptr == NULL) { BUG(); return IRQ_HANDLED; @@ -227,7 +227,7 @@ static void hil_ptr_disconnect(struct serio *serio) { struct hil_ptr *ptr; - ptr = (struct hil_ptr *)serio->private; + ptr = serio_get_drvdata(serio); if (ptr == NULL) { BUG(); return; @@ -238,21 +238,19 @@ static void hil_ptr_disconnect(struct serio *serio) kfree(ptr); } -static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver) +static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) { struct hil_ptr *ptr; char *txt; unsigned int i, naxsets, btntype; uint8_t did, *idd; - if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return; - - if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return; + if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM; memset(ptr, 0, sizeof(struct hil_ptr)); if (serio_open(serio, driver)) goto bail0; - serio->private = ptr; + serio_set_drvdata(serio, ptr); ptr->serio = serio; ptr->dev.private = ptr; @@ -380,23 +378,34 @@ static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver) (btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad", did); - return; + return 0; bail1: serio_close(serio); bail0: kfree(ptr); - return; + serio_set_drvdata(serio, NULL); + return -ENODEV; } +static struct serio_device_id hil_ptr_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; static struct serio_driver hil_ptr_serio_driver = { .driver = { .name = "hil_ptr", }, .description = "HP HIL mouse/tablet driver", - .connect = hil_ptr_connect, - .disconnect = hil_ptr_disconnect, - .interrupt = hil_ptr_interrupt + .id_table = hil_ptr_ids, + .connect = hil_ptr_connect, + .disconnect = hil_ptr_disconnect, + .interrupt = hil_ptr_interrupt }; static int __init hil_ptr_init(void) diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 9790d7169a53..a7b0de0f92b2 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -211,9 +211,6 @@ static void gscps2_reset(struct gscps2port *ps2port) writeb(0xff, addr+GSC_RESET); gscps2_flush(ps2port); spin_unlock_irqrestore(&ps2port->lock, flags); - - /* enable it */ - gscps2_enable(ps2port, ENABLE); } static LIST_HEAD(ps2port_list); @@ -307,6 +304,9 @@ static int gscps2_open(struct serio *port) gscps2_reset(ps2port); + /* enable it */ + gscps2_enable(ps2port, ENABLE); + gscps2_interrupt(0, NULL, NULL); return 0; @@ -370,8 +370,6 @@ static int __init gscps2_probe(struct parisc_device *dev) serio->port_data = ps2port; serio->dev.parent = &dev->dev; - list_add_tail(&ps2port->node, &ps2port_list); - ret = -EBUSY; if (request_irq(dev->irq, gscps2_interrupt, SA_SHIRQ, ps2port->port->name, ps2port)) goto fail_miserably; @@ -396,15 +394,16 @@ static int __init gscps2_probe(struct parisc_device *dev) serio_register_port(ps2port->port); + list_add_tail(&ps2port->node, &ps2port_list); + return 0; fail: free_irq(dev->irq, ps2port); fail_miserably: - list_del(&ps2port->node); iounmap(ps2port->addr); - release_mem_region(dev->hpa, GSC_STATUS + 4); + release_mem_region(dev->hpa.start, GSC_STATUS + 4); fail_nomem: kfree(ps2port); diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c index c243cb6fdfc4..5704204964a3 100644 --- a/drivers/input/serio/hil_mlc.c +++ b/drivers/input/serio/hil_mlc.c @@ -801,7 +801,8 @@ static int hil_mlc_serio_open(struct serio *serio) { struct hil_mlc_serio_map *map; struct hil_mlc *mlc; - if (serio->private != NULL) return -EBUSY; + if (serio_get_drvdata(serio) != NULL) + return -EBUSY; map = serio->port_data; if (map == NULL) { @@ -832,11 +833,18 @@ static void hil_mlc_serio_close(struct serio *serio) { return; } - serio->private = NULL; + serio_set_drvdata(serio, NULL); serio->drv = NULL; /* TODO wake up interruptable */ } +static struct serio_device_id hil_mlc_serio_id = { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .extra = SERIO_ANY, + .id = SERIO_ANY, +}; + int hil_mlc_register(hil_mlc *mlc) { int i; unsigned long flags; @@ -867,7 +875,7 @@ int hil_mlc_register(hil_mlc *mlc) { mlc_serio = kmalloc(sizeof(*mlc_serio), GFP_KERNEL); mlc->serio[i] = mlc_serio; memset(mlc_serio, 0, sizeof(*mlc_serio)); - mlc_serio->type = SERIO_HIL | SERIO_HIL_MLC; + mlc_serio->id = hil_mlc_serio_id; mlc_serio->write = hil_mlc_serio_write; mlc_serio->open = hil_mlc_serio_open; mlc_serio->close = hil_mlc_serio_close; diff --git a/include/linux/hil.h b/include/linux/hil.h new file mode 100644 index 000000000000..13352d7d0caf --- /dev/null +++ b/include/linux/hil.h @@ -0,0 +1,483 @@ +#ifndef _HIL_H_ +#define _HIL_H_ + +/* + * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * A note of thanks to HP for providing and shipping reference materials + * free of charge to help in the development of HIL support for Linux. + * + */ + +#include + +/* Physical constants relevant to raw loop/device timing. + */ + +#define HIL_CLOCK 8MHZ +#define HIL_EK1_CLOCK 30HZ +#define HIL_EK2_CLOCK 60HZ + +#define HIL_TIMEOUT_DEV 5 /* ms */ +#define HIL_TIMEOUT_DEVS 10 /* ms */ +#define HIL_TIMEOUT_NORESP 10 /* ms */ +#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */ +#define HIL_TIMEOUT_SELFTEST 200 /* ms */ + + +/* Actual wire line coding. These will only be useful if someone is + * implementing a software MLC to run HIL devices on a non-parisc machine. + */ + +#define HIL_WIRE_PACKET_LEN 15 +enum hil_wire_bitpos { + HIL_WIRE_START = 0, + HIL_WIRE_ADDR2, + HIL_WIRE_ADDR1, + HIL_WIRE_ADDR0, + HIL_WIRE_COMMAND, + HIL_WIRE_DATA7, + HIL_WIRE_DATA6, + HIL_WIRE_DATA5, + HIL_WIRE_DATA4, + HIL_WIRE_DATA3, + HIL_WIRE_DATA2, + HIL_WIRE_DATA1, + HIL_WIRE_DATA0, + HIL_WIRE_PARITY, + HIL_WIRE_STOP +}; + +/* HP documentation uses these bit positions to refer to commands; + * we will call these "packets". + */ +enum hil_pkt_bitpos { + HIL_PKT_CMD = 0x00000800, + HIL_PKT_ADDR2 = 0x00000400, + HIL_PKT_ADDR1 = 0x00000200, + HIL_PKT_ADDR0 = 0x00000100, + HIL_PKT_ADDR_MASK = 0x00000700, + HIL_PKT_ADDR_SHIFT = 8, + HIL_PKT_DATA7 = 0x00000080, + HIL_PKT_DATA6 = 0x00000040, + HIL_PKT_DATA5 = 0x00000020, + HIL_PKT_DATA4 = 0x00000010, + HIL_PKT_DATA3 = 0x00000008, + HIL_PKT_DATA2 = 0x00000004, + HIL_PKT_DATA1 = 0x00000002, + HIL_PKT_DATA0 = 0x00000001, + HIL_PKT_DATA_MASK = 0x000000FF, + HIL_PKT_DATA_SHIFT = 0 +}; + +/* The HIL MLC also has several error/status/control bits. We extend the + * "packet" to include these when direct access to the MLC is available, + * or emulate them in cases where they are not available. + * + * This way the device driver knows that the underlying MLC driver + * has had to deal with loop errors. + */ +enum hil_error_bitpos { + HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll, + or we have filled up the output + buffer and must wait. */ + HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */ + HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */ + HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */ + HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */ + HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */ + HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */ +}; + +enum hil_control_bitpos { + HIL_CTRL_TEST = 0x00010000, + HIL_CTRL_IPF = 0x00040000, + HIL_CTRL_APE = 0x02000000 +}; + +/* Bits 30,31 are unused, we use them to control write behavior. */ +#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control + before writing LSW to loop */ +#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */ + +/* This gives us a 32-bit "packet" + */ +typedef u32 hil_packet; + + +/* HIL Loop commands + */ +enum hil_command { + HIL_CMD_IFC = 0x00, /* Interface Clear */ + HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */ + HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */ + HIL_CMD_IDD = 0x03, /* Identify and Describe */ + HIL_CMD_DSR = 0x04, /* Device Soft Reset */ + HIL_CMD_PST = 0x05, /* Perform Self Test */ + HIL_CMD_RRG = 0x06, /* Read Register */ + HIL_CMD_WRG = 0x07, /* Write Register */ + HIL_CMD_ACF = 0x08, /* Auto Configure */ + HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */ + HIL_CMD_POL = 0x10, /* Poll */ + HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */ + HIL_CMD_RPL = 0x20, /* RePoll */ + HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */ + HIL_CMD_RNM = 0x30, /* Report Name */ + HIL_CMD_RST = 0x31, /* Report Status */ + HIL_CMD_EXD = 0x32, /* Extended Describe */ + HIL_CMD_RSC = 0x33, /* Report Security Code */ + + /* 0x34 to 0x3c reserved for future use */ + + HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */ + HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */ + HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */ + HIL_CMD_PR1 = 0x40, /* Prompt1 */ + HIL_CMD_PR2 = 0x41, /* Prompt2 */ + HIL_CMD_PR3 = 0x42, /* Prompt3 */ + HIL_CMD_PR4 = 0x43, /* Prompt4 */ + HIL_CMD_PR5 = 0x44, /* Prompt5 */ + HIL_CMD_PR6 = 0x45, /* Prompt6 */ + HIL_CMD_PR7 = 0x46, /* Prompt7 */ + HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ + HIL_CMD_AK1 = 0x48, /* Acknowlege1 */ + HIL_CMD_AK2 = 0x49, /* Acknowlege2 */ + HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */ + HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */ + HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */ + HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */ + HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */ + HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */ + + /* 0x50 to 0x78 reserved for future use */ + /* 0x80 to 0xEF device-specific commands */ + /* 0xf0 to 0xf9 reserved for future use */ + + HIL_CMD_RIO = 0xfa, /* Register I/O Error */ + HIL_CMD_SHR = 0xfb, /* System Hard Reset */ + HIL_CMD_TER = 0xfc, /* Transmission Error */ + HIL_CMD_CAE = 0xfd, /* Configuration Address Error */ + HIL_CMD_DHR = 0xfe, /* Device Hard Reset */ + + /* 0xff is prohibited from use. */ +}; + + +/* + * Response "records" to HIL commands + */ + +/* Device ID byte + */ +#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */ +#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */ +#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */ +#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */ +#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */ +#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */ +#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */ +#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD1 0x98 +#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */ +#define HIL_IDD_DID_ABS_TABLET 0x90 +#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */ +#define HIL_IDD_DID_ABS_TSCREEN 0x8c +#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD2 0x88 +#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD3 0x80 +#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */ +#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_REL_RSVD1 0x70 +#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_REL_RSVD2 0x6c +#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */ +#define HIL_IDD_DID_REL_MOUSE 0x68 +#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */ +#define HIL_IDD_DID_REL_QUAD 0x60 +#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */ +#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */ +#define HIL_IDD_DID_CHAR_BARCODE 0x5c +#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD1 0x58 +#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD2 0x50 +#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD3 0x40 +#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */ +#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD1 0x30 +#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */ +#define HIL_IDD_DID_OTHER_BARCODE 0x2c +#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD2 0x28 +#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD3 0x20 +#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */ + +/* IDD record header + */ +#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */ +#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */ +#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */ +#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */ +#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */ +#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */ +#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */ + +/* I/O Descriptor + */ +#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */ +#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */ +#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */ +#define HIL_IDD_IOD_PROMPT_SHIFT 4 +#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */ + +#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \ +((header_packet) & HIL_IDD_HEADER_AXSET_MASK) + +#define HIL_IDD_NUM_AXSETS(header_packet) \ +(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS)) + +#define HIL_IDD_LEN(header_packet) \ +((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \ + 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \ + 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \ + !!((header_packet) & HIL_IDD_HEADER_ABS)) + +/* The following HIL_IDD_* macros assume you have an array of + * packets and/or unpacked 8-bit data in the order that they + * were received. + */ + +#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \ +(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \ +(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \ +* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1))) + +#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \ +((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \ + (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8))) + +#define HIL_IDD_IOD(header_ptr) \ +(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1)) + +#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT)) + +#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY)) + +#define HIL_IDD_NUM_BUTTONS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0) + +#define HIL_IDD_NUM_PROMPTS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \ + >> HIL_IDD_IOD_PROMPT_SHIFT) : 0) + +/* The response to HIL EXD commands -- the "extended describe record" */ +#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */ +#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */ +#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */ +#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */ + +#define HIL_EXD_NUM_RRG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_RRG) ? \ + (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_NUM_WWG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_WRG) ? \ + (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \ + HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_LEN(header_ptr) \ +(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_WRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \ + 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1) + +#define HIL_EXD_LOCALE(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK)) + +#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8)) + +/* Device locale codes. */ + +/* Last defined locale code. Everything above this is "Reserved", + and note that this same table applies to the Device ID Byte where + keyboards may have a nationality code which is only 5 bits. */ +#define HIL_LOCALE_MAX 0x1f + +/* Map to hopefully useful strings. I was trying to make these look + like locale.aliases strings do; maybe that isn't the right table to + emulate. In either case, I didn't have much to work on. */ +#define HIL_LOCALE_MAP \ +"", /* 0x00 Reserved */ \ +"", /* 0x01 Reserved */ \ +"", /* 0x02 Reserved */ \ +"swiss.french", /* 0x03 Swiss/French */ \ +"portuguese", /* 0x04 Portuguese */ \ +"arabic", /* 0x05 Arabic */ \ +"hebrew", /* 0x06 Hebrew */ \ +"english.canadian", /* 0x07 Canadian English */ \ +"turkish", /* 0x08 Turkish */ \ +"greek", /* 0x09 Greek */ \ +"thai", /* 0x0a Thai (Thailand) */ \ +"italian", /* 0x0b Italian */ \ +"korean", /* 0x0c Hangul (Korea) */ \ +"dutch", /* 0x0d Dutch */ \ +"swedish", /* 0x0e Swedish */ \ +"german", /* 0x0f German */ \ +"chinese", /* 0x10 Chinese-PRC */ \ +"chinese", /* 0x11 Chinese-ROC */ \ +"swiss.french", /* 0x12 Swiss/French II */ \ +"spanish", /* 0x13 Spanish */ \ +"swiss.german", /* 0x14 Swiss/German II */ \ +"flemish", /* 0x15 Belgian (Flemish) */ \ +"finnish", /* 0x16 Finnish */ \ +"english.uk", /* 0x17 United Kingdom */ \ +"french.canadian", /* 0x18 French/Canadian */ \ +"swiss.german", /* 0x19 Swiss/German */ \ +"norwegian", /* 0x1a Norwegian */ \ +"french", /* 0x1b French */ \ +"danish", /* 0x1c Danish */ \ +"japanese", /* 0x1d Katakana */ \ +"spanish", /* 0x1e Latin American/Spanish*/\ +"english.us" /* 0x1f United States */ \ + + +/* HIL keycodes */ +#define HIL_KEYCODES_SET1_TBLSIZE 128 +#define HIL_KEYCODES_SET1 \ + KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \ + KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \ + KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \ + KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \ + KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \ + KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \ + KEY_B, KEY_V, KEY_C, KEY_X, \ + KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \ + KEY_6, KEY_F10, KEY_3, KEY_F11, \ + KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \ + KEY_H, KEY_G, KEY_F, KEY_D, \ + KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \ + KEY_U, KEY_Y, KEY_T, KEY_R, \ + KEY_E, KEY_W, KEY_Q, KEY_TAB, \ + KEY_7, KEY_6, KEY_5, KEY_4, \ + KEY_3, KEY_2, KEY_1, KEY_GRAVE, \ + KEY_F13, KEY_F14, KEY_F15, KEY_F16, \ + KEY_F17, KEY_F18, KEY_F19, KEY_F20, \ + KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \ + KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \ + KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \ + KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \ + KEY_8, KEY_9, KEY_0, KEY_MINUS, \ + KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \ + KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \ + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \ + KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \ + KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \ + KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \ + KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT + + +#define HIL_KEYCODES_SET3_TBLSIZE 128 +#define HIL_KEYCODES_SET3 \ + KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \ + KEY_3, KEY_4, KEY_5, KEY_6, \ + KEY_7, KEY_8, KEY_9, KEY_0, \ + KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \ + KEY_Q, KEY_W, KEY_E, KEY_R, \ + KEY_T, KEY_Y, KEY_U, KEY_I, \ + KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \ + KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \ + KEY_D, KEY_F, KEY_G, KEY_H, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \ + KEY_Z, KEY_X, KEY_C, KEY_V, \ + KEY_B, KEY_N, KEY_M, KEY_COMMA, \ + KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \ + KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \ + KEY_F2, KEY_F3, KEY_F4, KEY_F5, \ + KEY_F6, KEY_F7, KEY_F8, KEY_F9, \ + KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \ + KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \ + KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \ + KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \ + KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \ + KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \ + KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_F1, KEY_F2, KEY_F3, KEY_F4, \ + KEY_F5, KEY_F6, KEY_F7, KEY_F8, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + + +/* Response to POL command, the "poll record header" */ + +#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */ +#define HIL_POL_CTS 0x04 /* Device ready to receive data */ +#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */ +#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */ +#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */ +#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */ +#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */ +#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */ +#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */ +#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */ +#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */ +#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */ +#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */ + + +#endif /* _HIL_H_ */ diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h new file mode 100644 index 000000000000..8df29ca48a13 --- /dev/null +++ b/include/linux/hil_mlc.h @@ -0,0 +1,168 @@ +/* + * HP Human Interface Loop Master Link Controller driver. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + */ + +#include +#include +#include +#include +#include +#include + +typedef struct hil_mlc hil_mlc; + +/* The HIL has a complicated state engine. + * We define the structure of nodes in the state engine here. + */ +enum hilse_act { + /* HILSE_OUT prepares to receive input if the next node + * is an IN or EXPECT, and then sends the given packet. + */ + HILSE_OUT = 0, + + /* HILSE_CTS checks if the loop is busy. */ + HILSE_CTS, + + /* HILSE_OUT_LAST sends the given command packet to + * the last configured/running device on the loop. + */ + HILSE_OUT_LAST, + + /* HILSE_OUT_DISC sends the given command packet to + * the next device past the last configured/running one. + */ + HILSE_OUT_DISC, + + /* HILSE_FUNC runs a callback function with given arguments. + * a positive return value causes the "ugly" branch to be taken. + */ + HILSE_FUNC, + + /* HILSE_IN simply expects any non-errored packet to arrive + * within arg usecs. + */ + HILSE_IN = 0x100, + + /* HILSE_EXPECT expects a particular packet to arrive + * within arg usecs, any other packet is considered an error. + */ + HILSE_EXPECT, + + /* HILSE_EXPECT_LAST as above but dev field should be last + * discovered/operational device. + */ + HILSE_EXPECT_LAST, + + /* HILSE_EXPECT_LAST as above but dev field should be first + * undiscovered/inoperational device. + */ + HILSE_EXPECT_DISC +}; + +typedef int (hilse_func) (hil_mlc *mlc, int arg); +struct hilse_node { + enum hilse_act act; /* How to process this node */ + union { + hilse_func *func; /* Function to call if HILSE_FUNC */ + hil_packet packet; /* Packet to send or to compare */ + } object; + int arg; /* Timeout in usec or parm for func */ + int good; /* Node to jump to on success */ + int bad; /* Node to jump to on error */ + int ugly; /* Node to jump to on timeout */ +}; + +/* Methods for back-end drivers, e.g. hp_sdc_mlc */ +typedef int (hil_mlc_cts) (hil_mlc *mlc); +typedef void (hil_mlc_out) (hil_mlc *mlc); +typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout); + +struct hil_mlc_devinfo { + uint8_t idd[16]; /* Device ID Byte and Describe Record */ + uint8_t rsc[16]; /* Security Code Header and Record */ + uint8_t exd[16]; /* Extended Describe Record */ + uint8_t rnm[16]; /* Device name as returned by RNM command */ +}; + +struct hil_mlc_serio_map { + hil_mlc *mlc; + int di_revmap; + int didx; +}; + +/* How many (possibly old/detached) devices the we try to keep track of */ +#define HIL_MLC_DEVMEM 16 + +struct hil_mlc { + struct list_head list; /* hil_mlc is organized as linked list */ + + rwlock_t lock; + + void *priv; /* Data specific to a particular type of MLC */ + + int seidx; /* Current node in state engine */ + int istarted, ostarted; + + hil_mlc_cts *cts; + struct semaphore csem; /* Raised when loop idle */ + + hil_mlc_out *out; + struct semaphore osem; /* Raised when outpacket dispatched */ + hil_packet opacket; + + hil_mlc_in *in; + struct semaphore isem; /* Raised when a packet arrives */ + hil_packet ipacket[16]; + hil_packet imatch; + int icount; + struct timeval instart; + suseconds_t intimeout; + + int ddi; /* Last operational device id */ + int lcv; /* LCV to throttle loops */ + struct timeval lcv_tv; /* Time loop was started */ + + int di_map[7]; /* Maps below items to live devs */ + struct hil_mlc_devinfo di[HIL_MLC_DEVMEM]; + struct serio *serio[HIL_MLC_DEVMEM]; + struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM]; + hil_packet serio_opacket[HIL_MLC_DEVMEM]; + int serio_oidx[HIL_MLC_DEVMEM]; + struct hil_mlc_devinfo di_scratch; /* Temporary area */ + + int opercnt; + + struct tasklet_struct *tasklet; +}; + +int hil_mlc_register(hil_mlc *mlc); +int hil_mlc_unregister(hil_mlc *mlc); diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h new file mode 100644 index 000000000000..debd71515312 --- /dev/null +++ b/include/linux/hp_sdc.h @@ -0,0 +1,300 @@ +/* + * HP i8042 System Device Controller -- header + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * System Device Controller Microprocessor Firmware Theory of Operation + * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2 + * + */ + +#ifndef _LINUX_HP_SDC_H +#define _LINUX_HP_SDC_H + +#include +#include +#include +#include +#if defined(__hppa__) +#include +#endif + + +/* No 4X status reads take longer than this (in usec). + */ +#define HP_SDC_MAX_REG_DELAY 20000 + +typedef void (hp_sdc_irqhook) (int irq, void *dev_id, + uint8_t status, uint8_t data); + +int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback); +int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback); +int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback); + +typedef struct { + int actidx; /* Start of act. Acts are atomic WRT I/O to SDC */ + int idx; /* Index within the act */ + int endidx; /* transaction is over and done if idx == endidx */ + uint8_t *seq; /* commands/data for the transaction */ + union { + hp_sdc_irqhook *irqhook; /* Callback, isr or tasklet context */ + struct semaphore *semaphore; /* Semaphore to sleep on. */ + } act; +} hp_sdc_transaction; +int hp_sdc_enqueue_transaction(hp_sdc_transaction *this); +int hp_sdc_dequeue_transaction(hp_sdc_transaction *this); + +/* The HP_SDC_ACT* values are peculiar to this driver. + * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another + * act to perform the dealloc. + */ +#define HP_SDC_ACT_PRECMD 0x01 /* Send a command first */ +#define HP_SDC_ACT_DATAREG 0x02 /* Set data registers */ +#define HP_SDC_ACT_DATAOUT 0x04 /* Send data bytes */ +#define HP_SDC_ACT_POSTCMD 0x08 /* Send command after */ +#define HP_SDC_ACT_DATAIN 0x10 /* Collect data after */ +#define HP_SDC_ACT_DURING 0x1f +#define HP_SDC_ACT_SEMAPHORE 0x20 /* Raise semaphore after */ +#define HP_SDC_ACT_CALLBACK 0x40 /* Pass data to IRQ handler */ +#define HP_SDC_ACT_DEALLOC 0x80 /* Destroy transaction after */ +#define HP_SDC_ACT_AFTER 0xe0 +#define HP_SDC_ACT_DEAD 0x60 /* Act timed out. */ + +/* Rest of the flags are straightforward representation of the SDC interface */ +#define HP_SDC_STATUS_IBF 0x02 /* Input buffer full */ + +#define HP_SDC_STATUS_IRQMASK 0xf0 /* Bits containing "level 1" irq */ +#define HP_SDC_STATUS_PERIODIC 0x10 /* Periodic 10ms timer */ +#define HP_SDC_STATUS_USERTIMER 0x20 /* "Special purpose" timer */ +#define HP_SDC_STATUS_TIMER 0x30 /* Both PERIODIC and USERTIMER */ +#define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */ +#define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */ +#define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */ +#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */ +#define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */ +#define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */ +#define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */ +#define HP_SDC_STATUS_KMOD_CUP 0x20 /* Control key is up */ + +#define HP_SDC_NMISTATUS_FHS 0x40 /* NMI is a fast handshake irq */ + +/* Internal i8042 registers (there are more, but they are not too useful). */ + +#define HP_SDC_USE 0x02 /* Resource usage (including OB bit) */ +#define HP_SDC_IM 0x04 /* Interrupt mask */ +#define HP_SDC_CFG 0x11 /* Configuration register */ +#define HP_SDC_KBLANGUAGE 0x12 /* Keyboard language */ + +#define HP_SDC_D0 0x70 /* General purpose data buffer 0 */ +#define HP_SDC_D1 0x71 /* General purpose data buffer 1 */ +#define HP_SDC_D2 0x72 /* General purpose data buffer 2 */ +#define HP_SDC_D3 0x73 /* General purpose data buffer 3 */ +#define HP_SDC_VT1 0x74 /* Timer for voice 1 */ +#define HP_SDC_VT2 0x75 /* Timer for voice 2 */ +#define HP_SDC_VT3 0x76 /* Timer for voice 3 */ +#define HP_SDC_VT4 0x77 /* Timer for voice 4 */ +#define HP_SDC_KBN 0x78 /* Which HIL devs are Nimitz */ +#define HP_SDC_KBC 0x79 /* Which HIL devs are cooked kbds */ +#define HP_SDC_LPS 0x7a /* i8042's view of HIL status */ +#define HP_SDC_LPC 0x7b /* i8042's view of HIL "control" */ +#define HP_SDC_RSV 0x7c /* Reserved "for testing" */ +#define HP_SDC_LPR 0x7d /* i8042 count of HIL reconfigs */ +#define HP_SDC_XTD 0x7e /* "Extended Configuration" register */ +#define HP_SDC_STR 0x7f /* i8042 self-test result */ + +/* Bitfields for above registers */ +#define HP_SDC_USE_LOOP 0x04 /* Command is currently on the loop. */ + +#define HP_SDC_IM_MASK 0x1f /* these bits not part of cmd/status */ +#define HP_SDC_IM_FH 0x10 /* Mask the fast handshake irq */ +#define HP_SDC_IM_PT 0x08 /* Mask the periodic timer irq */ +#define HP_SDC_IM_TIMERS 0x04 /* Mask the MT/DT/CT irq */ +#define HP_SDC_IM_RESET 0x02 /* Mask the reset key irq */ +#define HP_SDC_IM_HIL 0x01 /* Mask the HIL MLC irq */ + +#define HP_SDC_CFG_ROLLOVER 0x08 /* WTF is "N-key rollover"? */ +#define HP_SDC_CFG_KBD 0x10 /* There is a keyboard */ +#define HP_SDC_CFG_NEW 0x20 /* Supports/uses HIL MLC */ +#define HP_SDC_CFG_KBD_OLD 0x03 /* keyboard code for non-HIL */ +#define HP_SDC_CFG_KBD_NEW 0x07 /* keyboard code from HIL autoconfig */ +#define HP_SDC_CFG_REV 0x40 /* Code revision bit */ +#define HP_SDC_CFG_IDPROM 0x80 /* IDPROM present in kbd (not HIL) */ + +#define HP_SDC_LPS_NDEV 0x07 /* # devices autoconfigured on HIL */ +#define HP_SDC_LPS_ACSUCC 0x08 /* loop autoconfigured successfully */ +#define HP_SDC_LPS_ACFAIL 0x80 /* last loop autoconfigure failed */ + +#define HP_SDC_LPC_APE_IPF 0x01 /* HIL MLC APE/IPF (autopoll) set */ +#define HP_SDC_LPC_ARCONERR 0x02 /* i8042 autoreconfigs loop on err */ +#define HP_SDC_LPC_ARCQUIET 0x03 /* i8042 doesn't report autoreconfigs*/ +#define HP_SDC_LPC_COOK 0x10 /* i8042 cooks devices in _KBN */ +#define HP_SDC_LPC_RC 0x80 /* causes autoreconfig */ + +#define HP_SDC_XTD_REV 0x07 /* contains revision code */ +#define HP_SDC_XTD_REV_STRINGS(val, str) \ +switch (val) { \ + case 0x1: str = "1820-3712"; break; \ + case 0x2: str = "1820-4379"; break; \ + case 0x3: str = "1820-4784"; break; \ + default: str = "unknown"; \ +}; +#define HP_SDC_XTD_BEEPER 0x08 /* TI SN76494 beeper available */ +#define HP_SDC_XTD_BBRTC 0x20 /* OKI MSM-58321 BBRTC present */ + +#define HP_SDC_CMD_LOAD_RT 0x31 /* Load real time (from 8042) */ +#define HP_SDC_CMD_LOAD_FHS 0x36 /* Load the fast handshake timer */ +#define HP_SDC_CMD_LOAD_MT 0x38 /* Load the match timer */ +#define HP_SDC_CMD_LOAD_DT 0x3B /* Load the delay timer */ +#define HP_SDC_CMD_LOAD_CT 0x3E /* Load the cycle timer */ + +#define HP_SDC_CMD_SET_IM 0x40 /* 010xxxxx == set irq mask */ + +/* The documents provided do not explicitly state that all registers betweem + * 0x01 and 0x1f inclusive can be read by sending their register index as a + * command, but this is implied and appears to be the case. + */ +#define HP_SDC_CMD_READ_RAM 0x00 /* Load from i8042 RAM (autoinc) */ +#define HP_SDC_CMD_READ_USE 0x02 /* Undocumented! Load from usage reg */ +#define HP_SDC_CMD_READ_IM 0x04 /* Load current interrupt mask */ +#define HP_SDC_CMD_READ_KCC 0x11 /* Load primary kbd config code */ +#define HP_SDC_CMD_READ_KLC 0x12 /* Load primary kbd language code */ +#define HP_SDC_CMD_READ_T1 0x13 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T2 0x14 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T3 0x15 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T4 0x16 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T5 0x17 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_D0 0xf0 /* Load from i8042 RAM location 0x70 */ +#define HP_SDC_CMD_READ_D1 0xf1 /* Load from i8042 RAM location 0x71 */ +#define HP_SDC_CMD_READ_D2 0xf2 /* Load from i8042 RAM location 0x72 */ +#define HP_SDC_CMD_READ_D3 0xf3 /* Load from i8042 RAM location 0x73 */ +#define HP_SDC_CMD_READ_VT1 0xf4 /* Load from i8042 RAM location 0x74 */ +#define HP_SDC_CMD_READ_VT2 0xf5 /* Load from i8042 RAM location 0x75 */ +#define HP_SDC_CMD_READ_VT3 0xf6 /* Load from i8042 RAM location 0x76 */ +#define HP_SDC_CMD_READ_VT4 0xf7 /* Load from i8042 RAM location 0x77 */ +#define HP_SDC_CMD_READ_KBN 0xf8 /* Load from i8042 RAM location 0x78 */ +#define HP_SDC_CMD_READ_KBC 0xf9 /* Load from i8042 RAM location 0x79 */ +#define HP_SDC_CMD_READ_LPS 0xfa /* Load from i8042 RAM location 0x7a */ +#define HP_SDC_CMD_READ_LPC 0xfb /* Load from i8042 RAM location 0x7b */ +#define HP_SDC_CMD_READ_RSV 0xfc /* Load from i8042 RAM location 0x7c */ +#define HP_SDC_CMD_READ_LPR 0xfd /* Load from i8042 RAM location 0x7d */ +#define HP_SDC_CMD_READ_XTD 0xfe /* Load from i8042 RAM location 0x7e */ +#define HP_SDC_CMD_READ_STR 0xff /* Load from i8042 RAM location 0x7f */ + +#define HP_SDC_CMD_SET_ARD 0xA0 /* Set emulated autorepeat delay */ +#define HP_SDC_CMD_SET_ARR 0xA2 /* Set emulated autorepeat rate */ +#define HP_SDC_CMD_SET_BELL 0xA3 /* Set voice 3 params for "beep" cmd */ +#define HP_SDC_CMD_SET_RPGR 0xA6 /* Set "RPG" irq rate (doesn't work) */ +#define HP_SDC_CMD_SET_RTMS 0xAD /* Set the RTC time (milliseconds) */ +#define HP_SDC_CMD_SET_RTD 0xAF /* Set the RTC time (days) */ +#define HP_SDC_CMD_SET_FHS 0xB2 /* Set fast handshake timer */ +#define HP_SDC_CMD_SET_MT 0xB4 /* Set match timer */ +#define HP_SDC_CMD_SET_DT 0xB7 /* Set delay timer */ +#define HP_SDC_CMD_SET_CT 0xBA /* Set cycle timer */ +#define HP_SDC_CMD_SET_RAMP 0xC1 /* Reset READ_RAM autoinc counter */ +#define HP_SDC_CMD_SET_D0 0xe0 /* Load to i8042 RAM location 0x70 */ +#define HP_SDC_CMD_SET_D1 0xe1 /* Load to i8042 RAM location 0x71 */ +#define HP_SDC_CMD_SET_D2 0xe2 /* Load to i8042 RAM location 0x72 */ +#define HP_SDC_CMD_SET_D3 0xe3 /* Load to i8042 RAM location 0x73 */ +#define HP_SDC_CMD_SET_VT1 0xe4 /* Load to i8042 RAM location 0x74 */ +#define HP_SDC_CMD_SET_VT2 0xe5 /* Load to i8042 RAM location 0x75 */ +#define HP_SDC_CMD_SET_VT3 0xe6 /* Load to i8042 RAM location 0x76 */ +#define HP_SDC_CMD_SET_VT4 0xe7 /* Load to i8042 RAM location 0x77 */ +#define HP_SDC_CMD_SET_KBN 0xe8 /* Load to i8042 RAM location 0x78 */ +#define HP_SDC_CMD_SET_KBC 0xe9 /* Load to i8042 RAM location 0x79 */ +#define HP_SDC_CMD_SET_LPS 0xea /* Load to i8042 RAM location 0x7a */ +#define HP_SDC_CMD_SET_LPC 0xeb /* Load to i8042 RAM location 0x7b */ +#define HP_SDC_CMD_SET_RSV 0xec /* Load to i8042 RAM location 0x7c */ +#define HP_SDC_CMD_SET_LPR 0xed /* Load to i8042 RAM location 0x7d */ +#define HP_SDC_CMD_SET_XTD 0xee /* Load to i8042 RAM location 0x7e */ +#define HP_SDC_CMD_SET_STR 0xef /* Load to i8042 RAM location 0x7f */ + +#define HP_SDC_CMD_DO_RTCW 0xc2 /* i8042 RAM 0x70 --> RTC */ +#define HP_SDC_CMD_DO_RTCR 0xc3 /* RTC[0x70 0:3] --> irq/status/data */ +#define HP_SDC_CMD_DO_BEEP 0xc4 /* i8042 RAM 0x70-74 --> beeper,VT3 */ +#define HP_SDC_CMD_DO_HIL 0xc5 /* i8042 RAM 0x70-73 --> + HIL MLC R0,R1 i8042 HIL watchdog */ + +/* Values used to (de)mangle input/output to/from the HIL MLC */ +#define HP_SDC_DATA 0x40 /* Data from an 8042 register */ +#define HP_SDC_HIL_CMD 0x50 /* Data from HIL MLC R1/8042 */ +#define HP_SDC_HIL_R1MASK 0x0f /* Contents of HIL MLC R1 0:3 */ +#define HP_SDC_HIL_AUTO 0x10 /* Set if POL results from i8042 */ +#define HP_SDC_HIL_ISERR 0x80 /* Has meaning as in next 4 values */ +#define HP_SDC_HIL_RC_DONE 0x80 /* i8042 auto-configured loop */ +#define HP_SDC_HIL_ERR 0x81 /* HIL MLC R2 had a bit set */ +#define HP_SDC_HIL_TO 0x82 /* i8042 HIL watchdog expired */ +#define HP_SDC_HIL_RC 0x84 /* i8042 is auto-configuring loop */ +#define HP_SDC_HIL_DAT 0x60 /* Data from HIL MLC R0 */ + + +typedef struct { + rwlock_t ibf_lock; + rwlock_t lock; /* user/tasklet lock */ + rwlock_t rtq_lock; /* isr/tasklet lock */ + rwlock_t hook_lock; /* isr/user lock for handler add/del */ + + unsigned int irq, nmi; /* Our IRQ lines */ + unsigned long base_io, status_io, data_io; /* Our IO ports */ + + uint8_t im; /* Interrupt mask */ + int set_im; /* Interrupt mask needs to be set. */ + + int ibf; /* Last known status of IBF flag */ + uint8_t wi; /* current i8042 write index */ + uint8_t r7[4]; /* current i8042[0x70 - 0x74] values */ + uint8_t r11, r7e; /* Values from version/revision regs */ + + hp_sdc_irqhook *timer, *reg, *hil, *pup, *cooked; + +#define HP_SDC_QUEUE_LEN 16 + hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */ + + int rcurr, rqty; /* Current read transact in process */ + struct timeval rtv; /* Time when current read started */ + int wcurr; /* Current write transact in process */ + + int dev_err; /* carries status from registration */ +#if defined(__hppa__) + struct parisc_device *dev; +#elif defined(__mc68000__) + void *dev; +#else +#error No support for device registration on this arch yet. +#endif + + struct timer_list kicker; /* Keeps below task alive */ + struct tasklet_struct task; + +} hp_i8042_sdc; + +#endif /* _LINUX_HP_SDC_H */ diff --git a/include/linux/input.h b/include/linux/input.h index e8c296ff6257..d7836311ada9 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -644,6 +644,7 @@ struct input_absinfo { #define BUS_ADB 0x17 #define BUS_I2C 0x18 #define BUS_HOST 0x19 +#define BUS_GSC 0x1A /* * Values describing the status of an effect -- cgit v1.2.3 From 2d5a2ae52d8863275e2d26398bc010249ea709d1 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 00:14:31 -0400 Subject: drivers/block/sx8: several minor changes * Newer hardware doesn't corrupt data when the queue depth is greater than one. Rather than force the user to recompile with a greater queue depth, make it a module parameter. * update copyright date * add MODULE_VERSION() * trim trailing whitespace * move CARM_SG_BOUNDARY to a separate enum, since its unsigned long * bump to version 1.0 --- drivers/block/sx8.c | 50 +++++++++++++++++++++++++++++++++++++------------- 1 file changed, 37 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index d57007b92f77..b5f612679a31 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -1,7 +1,7 @@ /* * sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware * - * Copyright 2004 Red Hat, Inc. + * Copyright 2004-2005 Red Hat, Inc. * * Author/maintainer: Jeff Garzik * @@ -31,10 +31,6 @@ #include #include -MODULE_AUTHOR("Jeff Garzik"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Promise SATA SX8 block driver"); - #if 0 #define CARM_DEBUG #define CARM_VERBOSE_DEBUG @@ -45,9 +41,35 @@ MODULE_DESCRIPTION("Promise SATA SX8 block driver"); #undef CARM_NDEBUG #define DRV_NAME "sx8" -#define DRV_VERSION "0.8" +#define DRV_VERSION "1.0" #define PFX DRV_NAME ": " +MODULE_AUTHOR("Jeff Garzik"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Promise SATA SX8 block driver"); +MODULE_VERSION(DRV_VERSION); + +/* + * SX8 hardware has a single message queue for all ATA ports. + * When this driver was written, the hardware (firmware?) would + * corrupt data eventually, if more than one request was outstanding. + * As one can imagine, having 8 ports bottlenecking on a single + * command hurts performance. + * + * Based on user reports, later versions of the hardware (firmware?) + * seem to be able to survive with more than one command queued. + * + * Therefore, we default to the safe option -- 1 command -- but + * allow the user to increase this. + * + * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ), + * but problems seem to occur when you exceed ~30, even on newer hardware. + */ +static int max_queue = 1; +module_param(max_queue, int, 0444); +MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)"); + + #define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN) /* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */ @@ -90,12 +112,10 @@ enum { /* command message queue limits */ CARM_MAX_REQ = 64, /* max command msgs per host */ - CARM_MAX_Q = 1, /* one command at a time */ CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */ /* S/G limits, host-wide and per-request */ CARM_MAX_REQ_SG = 32, /* max s/g entries per request */ - CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */ CARM_MAX_HOST_SG = 600, /* max s/g entries per host */ CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */ @@ -181,6 +201,10 @@ enum { FL_DYN_MAJOR = (1 << 17), }; +enum { + CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */ +}; + enum scatter_gather_types { SGT_32BIT = 0, SGT_64BIT = 1, @@ -448,7 +472,7 @@ static inline int carm_lookup_bucket(u32 msg_size) for (i = 0; i < ARRAY_SIZE(msg_sizes); i++) if (msg_size <= msg_sizes[i]) return i; - + return -ENOENT; } @@ -509,7 +533,7 @@ static struct carm_request *carm_get_request(struct carm_host *host) if (host->hw_sg_used >= (CARM_MAX_HOST_SG - CARM_MAX_REQ_SG)) return NULL; - for (i = 0; i < CARM_MAX_Q; i++) + for (i = 0; i < max_queue; i++) if ((host->msg_alloc & (1ULL << i)) == 0) { struct carm_request *crq = &host->req[i]; crq->port = NULL; @@ -521,14 +545,14 @@ static struct carm_request *carm_get_request(struct carm_host *host) assert(host->n_msgs <= CARM_MAX_REQ); return crq; } - + DPRINTK("no request available, returning NULL\n"); return NULL; } static int carm_put_request(struct carm_host *host, struct carm_request *crq) { - assert(crq->tag < CARM_MAX_Q); + assert(crq->tag < max_queue); if (unlikely((host->msg_alloc & (1ULL << crq->tag)) == 0)) return -EINVAL; /* tried to clear a tag that was not active */ @@ -791,7 +815,7 @@ static inline void carm_end_rq(struct carm_host *host, struct carm_request *crq, int is_ok) { carm_end_request_queued(host, crq, is_ok); - if (CARM_MAX_Q == 1) + if (max_queue == 1) carm_round_robin(host); else if ((host->n_msgs <= CARM_MSG_LOW_WATER) && (host->hw_sg_used <= CARM_SG_LOW_WATER)) { -- cgit v1.2.3 From 7bbaa75452c77cbaa016b987765c5d6c8b744587 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 01:33:18 -0400 Subject: drivers/block/sx8: kill unused variable --- drivers/block/sx8.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index b5f612679a31..1ded3b433459 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -242,7 +242,6 @@ static const char *state_name[] = { struct carm_port { unsigned int port_no; - unsigned int n_queued; struct gendisk *disk; struct carm_host *host; -- cgit v1.2.3 From c8e0ca683dfea7242ff29814561dfe761945e5b3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 22 Oct 2005 09:43:29 -0700 Subject: [IB] mthca: Always re-arm EQs in mthca_tavor_interrupt() We should always re-arm an event queue's interrupt in mthca_tavor_interrupt() if the corresponding bit is set in the event cause register (ECR), even if we didn't find any entries in the EQ. If we don't, then there's a window where we miss an EQ entry and then get stuck because we don't get another EQ event. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_eq.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index c81fa8e975ef..8dfafda5ed24 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -396,20 +396,21 @@ static irqreturn_t mthca_tavor_interrupt(int irq, void *dev_ptr, struct pt_regs writel(dev->eq_table.clr_mask, dev->eq_table.clr_int); ecr = readl(dev->eq_regs.tavor.ecr_base + 4); - if (ecr) { - writel(ecr, dev->eq_regs.tavor.ecr_base + - MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4); + if (!ecr) + return IRQ_NONE; - for (i = 0; i < MTHCA_NUM_EQ; ++i) - if (ecr & dev->eq_table.eq[i].eqn_mask && - mthca_eq_int(dev, &dev->eq_table.eq[i])) { + writel(ecr, dev->eq_regs.tavor.ecr_base + + MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4); + + for (i = 0; i < MTHCA_NUM_EQ; ++i) + if (ecr & dev->eq_table.eq[i].eqn_mask) { + if (mthca_eq_int(dev, &dev->eq_table.eq[i])) tavor_set_eq_ci(dev, &dev->eq_table.eq[i], dev->eq_table.eq[i].cons_index); - tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn); - } - } + tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn); + } - return IRQ_RETVAL(ecr); + return IRQ_HANDLED; } static irqreturn_t mthca_tavor_msi_x_interrupt(int irq, void *eq_ptr, -- cgit v1.2.3 From 057ace5e79da9ebf2aa82833cfea825533ac06fb Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 14:27:05 -0400 Subject: libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect. --- drivers/scsi/ahci.c | 2 +- drivers/scsi/ata_piix.c | 4 +-- drivers/scsi/libata-core.c | 68 ++++++++++++++++++++++----------------------- drivers/scsi/libata-scsi.c | 24 ++++++++-------- drivers/scsi/libata.h | 2 +- drivers/scsi/pdc_adma.c | 2 +- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_promise.c | 12 ++++---- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_sil.c | 2 +- drivers/scsi/sata_sil24.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_svw.c | 4 +-- drivers/scsi/sata_sx4.c | 10 +++---- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- drivers/scsi/sata_vsc.c | 4 +-- include/linux/ata.h | 6 ++-- include/linux/libata.h | 32 ++++++++++----------- 20 files changed, 93 insertions(+), 93 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index cfa22e4ee547..fe8187d6f58b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -216,7 +216,7 @@ static Scsi_Host_Template ahci_sht = { .ordered_flush = 1, }; -static struct ata_port_operations ahci_ops = { +static const struct ata_port_operations ahci_ops = { .port_disable = ata_port_disable, .check_status = ahci_check_status, diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index d71cef767cec..be021478f416 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -147,7 +147,7 @@ static Scsi_Host_Template piix_sht = { .ordered_flush = 1, }; -static struct ata_port_operations piix_pata_ops = { +static const struct ata_port_operations piix_pata_ops = { .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, @@ -177,7 +177,7 @@ static struct ata_port_operations piix_pata_ops = { .host_stop = ata_host_stop, }; -static struct ata_port_operations piix_sata_ops = { +static const struct ata_port_operations piix_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9269fd9b814f..d55f12dacfcb 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -67,9 +67,9 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); static void __ata_qc_complete(struct ata_queued_cmd *qc); @@ -97,7 +97,7 @@ MODULE_VERSION(DRV_VERSION); * Inherited from caller. */ -static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -155,7 +155,7 @@ static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) * Inherited from caller. */ -static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -224,7 +224,7 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * Inherited from caller. */ -void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_tf_load_mmio(ap, tf); @@ -244,7 +244,7 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -265,7 +265,7 @@ static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -285,7 +285,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * spin_lock_irqsave(host_set lock) */ -void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_exec_command_mmio(ap, tf); @@ -305,7 +305,7 @@ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) +static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf) { unsigned long flags; @@ -328,7 +328,7 @@ static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); @@ -348,7 +348,7 @@ static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); ap->ops->exec_command(ap, tf); @@ -558,7 +558,7 @@ u8 ata_chk_err(struct ata_port *ap) * Inherited from caller. */ -void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) { fis[0] = 0x27; /* Register - Host to Device FIS */ fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, @@ -599,7 +599,7 @@ void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) * Inherited from caller. */ -void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) { tf->command = fis[2]; /* status */ tf->feature = fis[3]; /* error */ @@ -845,7 +845,7 @@ static unsigned int ata_devchk(struct ata_port *ap, * the event of failure. */ -unsigned int ata_dev_classify(struct ata_taskfile *tf) +unsigned int ata_dev_classify(const struct ata_taskfile *tf) { /* Apple's open source Darwin code hints that some devices only * put a proper signature into the LBA mid/high registers, @@ -937,7 +937,7 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) * caller. */ -void ata_dev_id_string(u16 *id, unsigned char *s, +void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len) { unsigned int c; @@ -1054,7 +1054,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, * caller. */ -static inline void ata_dump_id(struct ata_device *dev) +static inline void ata_dump_id(const struct ata_device *dev) { DPRINTK("49==0x%04x " "53==0x%04x " @@ -1089,7 +1089,7 @@ static inline void ata_dump_id(struct ata_device *dev) * FIXME: pre IDE drive timing (do we care ?). */ -static unsigned int ata_pio_modes(struct ata_device *adev) +static unsigned int ata_pio_modes(const struct ata_device *adev) { u16 modes; @@ -1352,7 +1352,7 @@ err_out: } -static inline u8 ata_dev_knobble(struct ata_port *ap) +static inline u8 ata_dev_knobble(const struct ata_port *ap) { return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); } @@ -1684,7 +1684,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } -static struct { +static const struct { unsigned int shift; u8 base; } xfer_mode_classes[] = { @@ -2093,7 +2093,8 @@ err_out: DPRINTK("EXIT\n"); } -static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev) +static void ata_pr_blacklisted(const struct ata_port *ap, + const struct ata_device *dev) { printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", ap->id, dev->devno); @@ -2131,7 +2132,7 @@ static const char * ata_dma_blacklist [] = { "_NEC DV5800A", }; -static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) +static int ata_dma_blacklisted(const struct ata_device *dev) { unsigned char model_num[40]; char *s; @@ -2156,9 +2157,9 @@ static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) return 0; } -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) { - struct ata_device *master, *slave; + const struct ata_device *master, *slave; unsigned int mask; master = &ap->device[0]; @@ -2170,14 +2171,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->udma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2187,14 +2188,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->mwdma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2258,7 +2259,7 @@ static int fgb(u32 bitmap) * Zero on success, negative on error. */ -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out) { @@ -4144,7 +4145,7 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, struct ata_host_set *host_set, - struct ata_probe_ent *ent, unsigned int port_no) + const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; @@ -4203,7 +4204,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * */ -static struct ata_port * ata_host_add(struct ata_probe_ent *ent, +static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, struct ata_host_set *host_set, unsigned int port_no) { @@ -4251,7 +4252,7 @@ err_out: * */ -int ata_device_add(struct ata_probe_ent *ent) +int ata_device_add(const struct ata_probe_ent *ent) { unsigned int count = 0, i; struct device *dev = ent->dev; @@ -4470,7 +4471,7 @@ void ata_std_ports(struct ata_ioports *ioaddr) } static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; @@ -4570,7 +4571,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru if (!probe_ent) return NULL; - probe_ent->legacy_mode = 1; probe_ent->n_ports = 1; probe_ent->hard_port_no = port_num; @@ -4783,7 +4783,7 @@ void ata_pci_remove_one (struct pci_dev *pdev) } /* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) { unsigned long tmp = 0; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 90bf22204668..58858886d751 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -44,9 +44,9 @@ #include "libata.h" -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd); +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, @@ -418,7 +418,7 @@ int ata_scsi_error(struct Scsi_Host *host) */ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - u8 *scsicmd) + const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; @@ -485,7 +485,7 @@ invalid_fld: * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; @@ -512,7 +512,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * @plen: the transfer length */ -static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; @@ -539,7 +539,7 @@ static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) * @plen: the transfer length */ -static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; @@ -569,7 +569,7 @@ static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) * @plen: the transfer length */ -static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; @@ -608,7 +608,7 @@ static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; @@ -734,7 +734,7 @@ nothing_to_do: * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; @@ -1688,7 +1688,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * Zero on success, non-zero on failure. */ -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; @@ -1757,7 +1757,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) */ static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev) +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { struct ata_device *dev; @@ -1914,7 +1914,7 @@ void ata_scsi_simulate(u16 *id, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; - u8 *scsicmd = cmd->cmnd; + const u8 *scsicmd = cmd->cmnd; args.id = id; args.cmd = cmd; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 67d752ca8ae2..3d60190584ba 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -48,7 +48,7 @@ extern int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); -extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 53b8db4be1a9..9820f272f889 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -158,7 +158,7 @@ static Scsi_Host_Template adma_ata_sht = { .bios_param = ata_std_bios_param, }; -static struct ata_port_operations adma_ata_ops = { +static const struct ata_port_operations adma_ata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 9b6213928f7a..422e0b6f603a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -290,7 +290,7 @@ static Scsi_Host_Template mv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations mv_ops = { +static const struct ata_port_operations mv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 8866530bc491..1a56d6c79ddd 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -238,7 +238,7 @@ static Scsi_Host_Template nv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations nv_ops = { +static const struct ata_port_operations nv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 9bf8cbd29901..eee93b0016df 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -87,8 +87,8 @@ static void pdc_port_stop(struct ata_port *ap); static void pdc_pata_phy_reset(struct ata_port *ap); static void pdc_sata_phy_reset(struct ata_port *ap); static void pdc_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static int pdc_qc_issue_prot(struct ata_queued_cmd *qc); @@ -113,7 +113,7 @@ static Scsi_Host_Template pdc_ata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_sata_ops = { +static const struct ata_port_operations pdc_sata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -136,7 +136,7 @@ static struct ata_port_operations pdc_sata_ops = { .host_stop = ata_pci_host_stop, }; -static struct ata_port_operations pdc_pata_ops = { +static const struct ata_port_operations pdc_pata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -546,7 +546,7 @@ static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -554,7 +554,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) } -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index e1c1dae27c52..250dafa6bc36 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -147,7 +147,7 @@ static Scsi_Host_Template qs_ata_sht = { .bios_param = ata_std_bios_param, }; -static struct ata_port_operations qs_ata_ops = { +static const struct ata_port_operations qs_ata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index f6f0184e1ac8..3a056173fb95 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -150,7 +150,7 @@ static Scsi_Host_Template sil_sht = { .ordered_flush = 1, }; -static struct ata_port_operations sil_ops = { +static const struct ata_port_operations sil_ops = { .port_disable = ata_port_disable, .dev_config = sil_dev_config, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 19857814d69f..32d730bd5bb6 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -275,7 +275,7 @@ static Scsi_Host_Template sil24_sht = { .ordered_flush = 1, /* NCQ not supported yet */ }; -static struct ata_port_operations sil24_ops = { +static const struct ata_port_operations sil24_ops = { .port_disable = ata_port_disable, .check_status = sil24_check_status, diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 0761a3234fcf..057f7b98b6c4 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -102,7 +102,7 @@ static Scsi_Host_Template sis_sht = { .ordered_flush = 1, }; -static struct ata_port_operations sis_ops = { +static const struct ata_port_operations sis_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d89d968bedac..e0f9570bc6dd 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -102,7 +102,7 @@ static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, } -static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -297,7 +297,7 @@ static Scsi_Host_Template k2_sata_sht = { }; -static struct ata_port_operations k2_sata_ops = { +static const struct ata_port_operations k2_sata_ops = { .port_disable = ata_port_disable, .tf_load = k2_sata_tf_load, .tf_read = k2_sata_tf_read, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index d6d350a0b5e9..af08f4f650c1 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -157,8 +157,8 @@ static void pdc_20621_phy_reset (struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc_port_stop(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc20621_host_stop(struct ata_host_set *host_set); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); @@ -196,7 +196,7 @@ static Scsi_Host_Template pdc_sata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_20621_ops = { +static const struct ata_port_operations pdc_20621_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -899,7 +899,7 @@ out: DPRINTK("EXIT\n"); } -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -907,7 +907,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) } -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 9c06f2abe7f7..d68dc7d3422c 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -90,7 +90,7 @@ static Scsi_Host_Template uli_sht = { .ordered_flush = 1, }; -static struct ata_port_operations uli_ops = { +static const struct ata_port_operations uli_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 565872479b9a..80e291a909a9 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -109,7 +109,7 @@ static Scsi_Host_Template svia_sht = { .ordered_flush = 1, }; -static struct ata_port_operations svia_sata_ops = { +static const struct ata_port_operations svia_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 877b9fda3965..5af05fdf8544 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -115,7 +115,7 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) } -static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -231,7 +231,7 @@ static Scsi_Host_Template vsc_sata_sht = { }; -static struct ata_port_operations vsc_sata_ops = { +static const struct ata_port_operations vsc_sata_ops = { .port_disable = ata_port_disable, .tf_load = vsc_sata_tf_load, .tf_read = vsc_sata_tf_read, diff --git a/include/linux/ata.h b/include/linux/ata.h index 33276d1d05d2..d2873b732bb1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -261,7 +261,7 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) -static inline int ata_id_current_chs_valid(u16 *id) +static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command has not been issued to the device then the values of @@ -273,7 +273,7 @@ static inline int ata_id_current_chs_valid(u16 *id) id[56]; /* sectors in current translation */ } -static inline int atapi_cdb_len(u16 *dev_id) +static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; switch (tmp) { @@ -283,7 +283,7 @@ static inline int atapi_cdb_len(u16 *dev_id) } } -static inline int is_atapi_taskfile(struct ata_taskfile *tf) +static inline int is_atapi_taskfile(const struct ata_taskfile *tf) { return (tf->protocol == ATA_PROT_ATAPI) || (tf->protocol == ATA_PROT_ATAPI_NODATA) || diff --git a/include/linux/libata.h b/include/linux/libata.h index 634b5aa0a615..00a8a5738858 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -202,7 +202,7 @@ struct ata_ioports { struct ata_probe_ent { struct list_head node; struct device *dev; - struct ata_port_operations *port_ops; + const struct ata_port_operations *port_ops; Scsi_Host_Template *sht; struct ata_ioports port[ATA_MAX_PORTS]; unsigned int n_ports; @@ -225,7 +225,7 @@ struct ata_host_set { void __iomem *mmio_base; unsigned int n_ports; void *private_data; - struct ata_port_operations *ops; + const struct ata_port_operations *ops; struct ata_port * ports[0]; }; @@ -294,7 +294,7 @@ struct ata_device { struct ata_port { struct Scsi_Host *host; /* our co-allocated scsi host */ - struct ata_port_operations *ops; + const struct ata_port_operations *ops; unsigned long flags; /* ATA_FLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ @@ -341,10 +341,10 @@ struct ata_port_operations { void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); - void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); + void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf); void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); - void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); + void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf); u8 (*check_status)(struct ata_port *ap); u8 (*check_altstatus)(struct ata_port *ap); u8 (*check_err)(struct ata_port *ap); @@ -385,7 +385,7 @@ struct ata_port_info { unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; - struct ata_port_operations *port_ops; + const struct ata_port_operations *port_ops; }; struct ata_timing { @@ -413,7 +413,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); #endif /* CONFIG_PCI */ -extern int ata_device_add(struct ata_probe_ent *ent); +extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(Scsi_Host_Template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); @@ -426,16 +426,16 @@ extern int ata_ratelimit(void); /* * Default driver ops implementations */ -extern void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp); -extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf); +extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp); +extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device); extern void ata_std_dev_select (struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern u8 ata_chk_err(struct ata_port *ap); -extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); @@ -446,8 +446,8 @@ extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen); extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); -extern unsigned int ata_dev_classify(struct ata_taskfile *tf); -extern void ata_dev_id_string(u16 *id, unsigned char *s, +extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); +extern void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_dev_config(struct ata_port *ap, unsigned int i); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); @@ -502,7 +502,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); -extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); +extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); #endif /* CONFIG_PCI */ @@ -512,7 +512,7 @@ static inline unsigned int ata_tag_valid(unsigned int tag) return (tag < ATA_MAX_QUEUE) ? 1 : 0; } -static inline unsigned int ata_dev_present(struct ata_device *dev) +static inline unsigned int ata_dev_present(const struct ata_device *dev) { return ((dev->class == ATA_DEV_ATA) || (dev->class == ATA_DEV_ATAPI)); @@ -711,7 +711,7 @@ static inline unsigned int sata_dev_present(struct ata_port *ap) return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0; } -static inline int ata_try_flush_cache(struct ata_device *dev) +static inline int ata_try_flush_cache(const struct ata_device *dev) { return ata_id_wcache_enabled(dev->id) || ata_id_has_flush(dev->id) || -- cgit v1.2.3 From 5d7edb3c1a01310725d86f0d83fb3be45685dc82 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 24 Oct 2005 10:53:25 -0700 Subject: [IB] Add idr_destroy() calls on module unload Add idr_destroy() calls to the module_exit() functions of the four IB driver modules that use idrs, so we don't leak idr_layer_cache objects when these modules are unloaded. Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm.c | 1 + drivers/infiniband/core/sa_query.c | 1 + drivers/infiniband/core/ucm.c | 1 + drivers/infiniband/core/uverbs_main.c | 7 +++++++ 4 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 54db6d4831f1..151ef83cc14f 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3323,6 +3323,7 @@ static void __exit ib_cm_cleanup(void) flush_workqueue(cm.wq); destroy_workqueue(cm.wq); ib_unregister_client(&cm_client); + idr_destroy(&cm.local_id_table); } module_init(ib_cm_init); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 262618210c1c..e215cf0478d6 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -975,6 +975,7 @@ static int __init ib_sa_init(void) static void __exit ib_sa_cleanup(void) { ib_unregister_client(&sa_client); + idr_destroy(&query_idr); } module_init(ib_sa_init); diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d0f0b0a2edd3..5a6ba4030d44 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -1320,6 +1320,7 @@ static void __exit ib_ucm_cleanup(void) class_destroy(ib_ucm_class); cdev_del(&ib_ucm_cdev); unregister_chrdev_region(IB_UCM_DEV, 1); + idr_destroy(&ctx_id_table); } module_init(ib_ucm_init); diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 12511808de21..add45f7faa5b 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -762,6 +762,13 @@ static void __exit ib_uverbs_cleanup(void) unregister_filesystem(&uverbs_event_fs); class_unregister(&uverbs_class); unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES); + idr_destroy(&ib_uverbs_pd_idr); + idr_destroy(&ib_uverbs_mr_idr); + idr_destroy(&ib_uverbs_mw_idr); + idr_destroy(&ib_uverbs_ah_idr); + idr_destroy(&ib_uverbs_cq_idr); + idr_destroy(&ib_uverbs_qp_idr); + idr_destroy(&ib_uverbs_srq_idr); } module_init(ib_uverbs_init); -- cgit v1.2.3 From ae7971a7706384ca373fb7e212fe195698e6c5a1 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 24 Oct 2005 12:33:56 -0700 Subject: [IB] CM: Fix initialization of QP attributes for UC QPs. Fix cm_init_qp_init_attr(), cm_init_qp_rtr_attr() and cm_init_qp_rts_attr() so that they correctly handle the differences between UC and RC QPs. This fixes problems with setting up UC QPs through the CM. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 3fe6f4754fa8..389fecbaf662 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -135,6 +135,7 @@ struct cm_id_private { __be64 tid; __be32 local_qpn; __be32 remote_qpn; + enum ib_qp_type qp_type; __be32 sq_psn; __be32 rq_psn; int timeout_ms; @@ -926,6 +927,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_id_priv->responder_resources = param->responder_resources; cm_id_priv->retry_count = param->retry_count; cm_id_priv->path_mtu = param->primary_path->mtu; + cm_id_priv->qp_type = param->qp_type; ret = cm_alloc_msg(cm_id_priv, &cm_id_priv->msg); if (ret) @@ -1320,6 +1322,7 @@ static int cm_req_handler(struct cm_work *work) cm_req_get_primary_local_ack_timeout(req_msg); cm_id_priv->retry_count = cm_req_get_retry_count(req_msg); cm_id_priv->rnr_retry_count = cm_req_get_rnr_retry_count(req_msg); + cm_id_priv->qp_type = cm_req_get_qp_type(req_msg); cm_format_req_event(work, cm_id_priv, &listen_cm_id_priv->id); cm_process_work(cm_id_priv, work); @@ -3079,10 +3082,10 @@ static int cm_init_qp_init_attr(struct cm_id_private *cm_id_priv, case IB_CM_ESTABLISHED: *qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS | IB_QP_PKEY_INDEX | IB_QP_PORT; - qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE; + qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE | + IB_ACCESS_REMOTE_WRITE; if (cm_id_priv->responder_resources) - qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_WRITE | - IB_ACCESS_REMOTE_READ; + qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_READ; qp_attr->pkey_index = cm_id_priv->av.pkey_index; qp_attr->port_num = cm_id_priv->av.port->port_num; ret = 0; @@ -3112,14 +3115,18 @@ static int cm_init_qp_rtr_attr(struct cm_id_private *cm_id_priv, case IB_CM_MRA_REP_RCVD: case IB_CM_ESTABLISHED: *qp_attr_mask = IB_QP_STATE | IB_QP_AV | IB_QP_PATH_MTU | - IB_QP_DEST_QPN | IB_QP_RQ_PSN | - IB_QP_MAX_DEST_RD_ATOMIC | IB_QP_MIN_RNR_TIMER; + IB_QP_DEST_QPN | IB_QP_RQ_PSN; qp_attr->ah_attr = cm_id_priv->av.ah_attr; qp_attr->path_mtu = cm_id_priv->path_mtu; qp_attr->dest_qp_num = be32_to_cpu(cm_id_priv->remote_qpn); qp_attr->rq_psn = be32_to_cpu(cm_id_priv->rq_psn); - qp_attr->max_dest_rd_atomic = cm_id_priv->responder_resources; - qp_attr->min_rnr_timer = 0; + if (cm_id_priv->qp_type == IB_QPT_RC) { + *qp_attr_mask |= IB_QP_MAX_DEST_RD_ATOMIC | + IB_QP_MIN_RNR_TIMER; + qp_attr->max_dest_rd_atomic = + cm_id_priv->responder_resources; + qp_attr->min_rnr_timer = 0; + } if (cm_id_priv->alt_av.ah_attr.dlid) { *qp_attr_mask |= IB_QP_ALT_PATH; qp_attr->alt_ah_attr = cm_id_priv->alt_av.ah_attr; @@ -3148,14 +3155,17 @@ static int cm_init_qp_rts_attr(struct cm_id_private *cm_id_priv, case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: case IB_CM_ESTABLISHED: - *qp_attr_mask = IB_QP_STATE | IB_QP_TIMEOUT | IB_QP_RETRY_CNT | - IB_QP_RNR_RETRY | IB_QP_SQ_PSN | - IB_QP_MAX_QP_RD_ATOMIC; - qp_attr->timeout = cm_id_priv->local_ack_timeout; - qp_attr->retry_cnt = cm_id_priv->retry_count; - qp_attr->rnr_retry = cm_id_priv->rnr_retry_count; + *qp_attr_mask = IB_QP_STATE | IB_QP_SQ_PSN; qp_attr->sq_psn = be32_to_cpu(cm_id_priv->sq_psn); - qp_attr->max_rd_atomic = cm_id_priv->initiator_depth; + if (cm_id_priv->qp_type == IB_QPT_RC) { + *qp_attr_mask |= IB_QP_TIMEOUT | IB_QP_RETRY_CNT | + IB_QP_RNR_RETRY | + IB_QP_MAX_QP_RD_ATOMIC; + qp_attr->timeout = cm_id_priv->local_ack_timeout; + qp_attr->retry_cnt = cm_id_priv->retry_count; + qp_attr->rnr_retry = cm_id_priv->rnr_retry_count; + qp_attr->max_rd_atomic = cm_id_priv->initiator_depth; + } if (cm_id_priv->alt_av.ah_attr.dlid) { *qp_attr_mask |= IB_QP_PATH_MIG_STATE; qp_attr->path_mig_state = IB_MIG_REARM; -- cgit v1.2.3 From c14e2cfc18659c6ca67c2e10417c432eb978d976 Mon Sep 17 00:00:00 2001 From: James Simmons Date: Mon, 24 Oct 2005 21:46:21 +0100 Subject: [PATCH] Return the line length via sysfs for fbdev This small patch returns the stride/line length of the framebuffer via sysfs. Signed-off-by: James Simmons Signed-off-by: Linus Torvalds --- drivers/video/fbsysfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index 1147b899f007..007c8e9b2b39 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -242,6 +242,13 @@ static ssize_t show_virtual(struct class_device *class_device, char *buf) fb_info->var.yres_virtual); } +static ssize_t show_stride(struct class_device *class_device, char *buf) +{ + struct fb_info *fb_info = + (struct fb_info *)class_get_devdata(class_device); + return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length); +} + /* Format for cmap is "%02x%c%4x%4x%4x\n" */ /* %02x entry %c transp %4x red %4x blue %4x green \n */ /* 256 rows at 16 chars equals 4096, the normal page size */ @@ -432,6 +439,7 @@ static struct class_device_attribute class_device_attrs[] = { __ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan), __ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual), __ATTR(name, S_IRUGO, show_name, NULL), + __ATTR(stride, S_IRUGO, show_stride, NULL), }; int fb_init_class_device(struct fb_info *fb_info) -- cgit v1.2.3 From add7b58e7558dd2894f3c17ca8574099fcba5c15 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 24 Oct 2005 22:11:57 +0100 Subject: [SERIAL] support the Exsys EX-4055 4S four-port card Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 25 ++++++++++++++++++++++++- include/linux/pci_ids.h | 1 + 2 files changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 0e21f583690e..5da61ebbac88 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -226,8 +226,10 @@ static int __devinit pci_plx9050_init(struct pci_dev *dev) } irq_config = 0x41; - if (dev->vendor == PCI_VENDOR_ID_PANACOM) + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { irq_config = 0x43; + } if ((dev->vendor == PCI_VENDOR_ID_PLX) && (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { /* @@ -661,6 +663,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = { /* * PLX */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, { .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050, @@ -927,6 +938,7 @@ enum pci_board_num_t { pbn_panacom, pbn_panacom2, pbn_panacom4, + pbn_exsys_4055, pbn_plx_romulus, pbn_oxsemi, pbn_intel_i960, @@ -1292,6 +1304,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .reg_shift = 7, }, + [pbn_exsys_4055] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + /* I think this entry is broken - the first_offset looks wrong --rmk */ [pbn_plx_romulus] = { .flags = FL_BASE2, @@ -1853,6 +1872,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CHASE_PCIRAS, PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_exsys_4055 }, /* * Megawolf Romulus PCI Serial Card, from Mike Hudson * (Exoray@isys.ca) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f74ed9462475..ca0691c319ab 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2696,6 +2696,7 @@ #define PCI_SUBVENDOR_ID_EXSYS 0xd84d #define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 +#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055 #define PCI_VENDOR_ID_TIGERJET 0xe159 #define PCI_DEVICE_ID_TIGERJET_300 0x0001 -- cgit v1.2.3 From 551f8f0e87becb415c522adccab524a7a05ca83a Mon Sep 17 00:00:00 2001 From: Justin Chen Date: Mon, 24 Oct 2005 22:16:38 +0100 Subject: [SERIAL] new hp diva console port Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: Andrew Morton Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 5da61ebbac88..5c3c03932d6d 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -152,6 +152,7 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev) rc = 4; break; case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: rc = 1; break; } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ca0691c319ab..71834f05504f 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -723,6 +723,7 @@ #define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 #define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 #define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 +#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a #define PCI_DEVICE_ID_HP_CISS 0x3210 #define PCI_DEVICE_ID_HP_CISSA 0x3220 #define PCI_DEVICE_ID_HP_CISSB 0x3222 -- cgit v1.2.3 From 6f0ef4fa57b9ba27d7b1c330bad041f1665501fe Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 25 Oct 2005 01:44:30 -0400 Subject: [PATCH] libata kernel-doc fixes Correct some function names in kernel-doc. Add some kernel-doc descriptions. Fix some typos. Remove a few blank lines. Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 36 ++++++++++++++---------------------- 1 file changed, 14 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d55f12dacfcb..dcd3b5553cc8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -87,7 +87,7 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); /** - * ata_tf_load - send taskfile registers to host controller + * ata_tf_load_pio - send taskfile registers to host controller * @ap: Port to which output is sent * @tf: ATA taskfile register set * @@ -2701,13 +2701,13 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) /** * ata_pio_poll - - * @ap: + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) * * RETURNS: - * + * timeout value to use */ static unsigned long ata_pio_poll(struct ata_port *ap) @@ -2748,8 +2748,8 @@ static unsigned long ata_pio_poll(struct ata_port *ap) } /** - * ata_pio_complete - - * @ap: + * ata_pio_complete - check if drive is busy or idle + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -2801,7 +2801,7 @@ static int ata_pio_complete (struct ata_port *ap) /** - * swap_buf_le16 - + * swap_buf_le16 - swap halves of 16-words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -2810,6 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap) * vice-versa. * * LOCKING: + * Inherited from caller. */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { @@ -2832,7 +2833,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * * LOCKING: * Inherited from caller. - * */ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2878,7 +2878,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2918,7 +2917,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -3071,7 +3069,6 @@ next_sg: * * LOCKING: * Inherited from caller. - * */ static void atapi_pio_bytes(struct ata_queued_cmd *qc) @@ -3107,8 +3104,8 @@ err_out: } /** - * ata_pio_sector - - * @ap: + * ata_pio_block - start PIO on a block + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -3120,7 +3117,7 @@ static void ata_pio_block(struct ata_port *ap) u8 status; /* - * This is purely hueristic. This is a fast path. + * This is purely heuristic. This is a fast path. * Sometimes when we enter, BSY will be cleared in * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then @@ -3440,7 +3437,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_free(struct ata_queued_cmd *qc) { @@ -3460,7 +3456,6 @@ void ata_qc_free(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -3954,7 +3949,6 @@ idle_irq: * * RETURNS: * IRQ_NONE or IRQ_HANDLED. - * */ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) @@ -4066,6 +4060,7 @@ err_out: * May be used as the port_start() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ int ata_port_start (struct ata_port *ap) @@ -4091,6 +4086,7 @@ int ata_port_start (struct ata_port *ap) * May be used as the port_stop() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ void ata_port_stop (struct ata_port *ap) @@ -4113,6 +4109,7 @@ void ata_host_stop (struct ata_host_set *host_set) * @do_unregister: 1 if we fully unregister, 0 to just stop the port * * LOCKING: + * Inherited from caller. */ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) @@ -4140,7 +4137,6 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * * LOCKING: * Inherited from caller. - * */ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, @@ -4201,7 +4197,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * * RETURNS: * New ata_port on success, for NULL on error. - * */ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, @@ -4249,7 +4244,6 @@ err_out: * * RETURNS: * Number of ports registered. Zero on error (no ports registered). - * */ int ata_device_add(const struct ata_probe_ent *ent) @@ -4381,7 +4375,6 @@ err_out: * Inherited from calling layer (may sleep). */ - void ata_host_set_remove(struct ata_host_set *host_set) { struct ata_port *ap; @@ -4614,7 +4607,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru * * RETURNS: * Zero on success, negative on errno-based value on error. - * */ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, @@ -4762,7 +4754,7 @@ err_out: * @pdev: PCI device that was removed * * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occured. + * hot-unplug or module unload event has occurred. * Handle this by unregistering all objects associated * with this PCI device. Free those objects. Then finally * release PCI resources and disable device. -- cgit v1.2.3 From 34816ad98efe4d47ffd858a0345321f9d85d9420 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Tue, 25 Oct 2005 10:51:39 -0700 Subject: [IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/agent.c | 293 +++++++++----------------------- drivers/infiniband/core/agent.h | 13 +- drivers/infiniband/core/agent_priv.h | 62 ------- drivers/infiniband/core/cm.c | 137 +++++---------- drivers/infiniband/core/mad.c | 288 ++++++++++++++----------------- drivers/infiniband/core/mad_priv.h | 8 +- drivers/infiniband/core/mad_rmpp.c | 87 +++++----- drivers/infiniband/core/mad_rmpp.h | 2 + drivers/infiniband/core/sa_query.c | 239 +++++++++++++------------- drivers/infiniband/core/smi.h | 2 + drivers/infiniband/core/user_mad.c | 47 +++-- drivers/infiniband/hw/mthca/mthca_mad.c | 72 +------- include/rdma/ib_mad.h | 66 +++---- include/rdma/ib_verbs.h | 3 - 14 files changed, 475 insertions(+), 844 deletions(-) delete mode 100644 drivers/infiniband/core/agent_priv.h (limited to 'drivers') diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c index 5ac86f566dc0..0c3c6952faae 100644 --- a/drivers/infiniband/core/agent.c +++ b/drivers/infiniband/core/agent.c @@ -37,58 +37,41 @@ * $Id: agent.c 1389 2004-12-27 22:56:47Z roland $ */ -#include - -#include +#include "agent.h" +#include "smi.h" -#include +#define SPFX "ib_agent: " -#include "smi.h" -#include "agent_priv.h" -#include "mad_priv.h" -#include "agent.h" +struct ib_agent_port_private { + struct list_head port_list; + struct ib_mad_agent *agent[2]; +}; -spinlock_t ib_agent_port_list_lock; +static DEFINE_SPINLOCK(ib_agent_port_list_lock); static LIST_HEAD(ib_agent_port_list); -/* - * Caller must hold ib_agent_port_list_lock - */ -static inline struct ib_agent_port_private * -__ib_get_agent_port(struct ib_device *device, int port_num, - struct ib_mad_agent *mad_agent) +static struct ib_agent_port_private * +__ib_get_agent_port(struct ib_device *device, int port_num) { struct ib_agent_port_private *entry; - BUG_ON(!(!!device ^ !!mad_agent)); /* Exactly one MUST be (!NULL) */ - - if (device) { - list_for_each_entry(entry, &ib_agent_port_list, port_list) { - if (entry->smp_agent->device == device && - entry->port_num == port_num) - return entry; - } - } else { - list_for_each_entry(entry, &ib_agent_port_list, port_list) { - if ((entry->smp_agent == mad_agent) || - (entry->perf_mgmt_agent == mad_agent)) - return entry; - } + list_for_each_entry(entry, &ib_agent_port_list, port_list) { + if (entry->agent[0]->device == device && + entry->agent[0]->port_num == port_num) + return entry; } return NULL; } -static inline struct ib_agent_port_private * -ib_get_agent_port(struct ib_device *device, int port_num, - struct ib_mad_agent *mad_agent) +static struct ib_agent_port_private * +ib_get_agent_port(struct ib_device *device, int port_num) { struct ib_agent_port_private *entry; unsigned long flags; spin_lock_irqsave(&ib_agent_port_list_lock, flags); - entry = __ib_get_agent_port(device, port_num, mad_agent); + entry = __ib_get_agent_port(device, port_num); spin_unlock_irqrestore(&ib_agent_port_list_lock, flags); - return entry; } @@ -100,192 +83,76 @@ int smi_check_local_dr_smp(struct ib_smp *smp, if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) return 1; - port_priv = ib_get_agent_port(device, port_num, NULL); + + port_priv = ib_get_agent_port(device, port_num); if (!port_priv) { printk(KERN_DEBUG SPFX "smi_check_local_dr_smp %s port %d " - "not open\n", - device->name, port_num); + "not open\n", device->name, port_num); return 1; } - return smi_check_local_smp(port_priv->smp_agent, smp); + return smi_check_local_smp(port_priv->agent[0], smp); } -static int agent_mad_send(struct ib_mad_agent *mad_agent, - struct ib_agent_port_private *port_priv, - struct ib_mad_private *mad_priv, - struct ib_grh *grh, - struct ib_wc *wc) +int agent_send_response(struct ib_mad *mad, struct ib_grh *grh, + struct ib_wc *wc, struct ib_device *device, + int port_num, int qpn) { - struct ib_agent_send_wr *agent_send_wr; - struct ib_sge gather_list; - struct ib_send_wr send_wr; - struct ib_send_wr *bad_send_wr; - struct ib_ah_attr ah_attr; - unsigned long flags; - int ret = 1; - - agent_send_wr = kmalloc(sizeof(*agent_send_wr), GFP_KERNEL); - if (!agent_send_wr) - goto out; - agent_send_wr->mad = mad_priv; - - gather_list.addr = dma_map_single(mad_agent->device->dma_device, - &mad_priv->mad, - sizeof(mad_priv->mad), - DMA_TO_DEVICE); - gather_list.length = sizeof(mad_priv->mad); - gather_list.lkey = mad_agent->mr->lkey; - - send_wr.next = NULL; - send_wr.opcode = IB_WR_SEND; - send_wr.sg_list = &gather_list; - send_wr.num_sge = 1; - send_wr.wr.ud.remote_qpn = wc->src_qp; /* DQPN */ - send_wr.wr.ud.timeout_ms = 0; - send_wr.send_flags = IB_SEND_SIGNALED | IB_SEND_SOLICITED; + struct ib_agent_port_private *port_priv; + struct ib_mad_agent *agent; + struct ib_mad_send_buf *send_buf; + struct ib_ah *ah; + int ret; - ah_attr.dlid = wc->slid; - ah_attr.port_num = mad_agent->port_num; - ah_attr.src_path_bits = wc->dlid_path_bits; - ah_attr.sl = wc->sl; - ah_attr.static_rate = 0; - ah_attr.ah_flags = 0; /* No GRH */ - if (mad_priv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT) { - if (wc->wc_flags & IB_WC_GRH) { - ah_attr.ah_flags = IB_AH_GRH; - /* Should sgid be looked up ? */ - ah_attr.grh.sgid_index = 0; - ah_attr.grh.hop_limit = grh->hop_limit; - ah_attr.grh.flow_label = be32_to_cpu( - grh->version_tclass_flow) & 0xfffff; - ah_attr.grh.traffic_class = (be32_to_cpu( - grh->version_tclass_flow) >> 20) & 0xff; - memcpy(ah_attr.grh.dgid.raw, - grh->sgid.raw, - sizeof(ah_attr.grh.dgid)); - } + port_priv = ib_get_agent_port(device, port_num); + if (!port_priv) { + printk(KERN_ERR SPFX "Unable to find port agent\n"); + return -ENODEV; } - agent_send_wr->ah = ib_create_ah(mad_agent->qp->pd, &ah_attr); - if (IS_ERR(agent_send_wr->ah)) { - printk(KERN_ERR SPFX "No memory for address handle\n"); - kfree(agent_send_wr); - goto out; + agent = port_priv->agent[qpn]; + ah = ib_create_ah_from_wc(agent->qp->pd, wc, grh, port_num); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); + printk(KERN_ERR SPFX "ib_create_ah_from_wc error:%d\n", ret); + return ret; } - send_wr.wr.ud.ah = agent_send_wr->ah; - if (mad_priv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT) { - send_wr.wr.ud.pkey_index = wc->pkey_index; - send_wr.wr.ud.remote_qkey = IB_QP1_QKEY; - } else { /* for SMPs */ - send_wr.wr.ud.pkey_index = 0; - send_wr.wr.ud.remote_qkey = 0; + send_buf = ib_create_send_mad(agent, wc->src_qp, wc->pkey_index, 0, + IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, + GFP_KERNEL); + if (IS_ERR(send_buf)) { + ret = PTR_ERR(send_buf); + printk(KERN_ERR SPFX "ib_create_send_mad error:%d\n", ret); + goto err1; } - send_wr.wr.ud.mad_hdr = &mad_priv->mad.mad.mad_hdr; - send_wr.wr_id = (unsigned long)agent_send_wr; - pci_unmap_addr_set(agent_send_wr, mapping, gather_list.addr); - - /* Send */ - spin_lock_irqsave(&port_priv->send_list_lock, flags); - if (ib_post_send_mad(mad_agent, &send_wr, &bad_send_wr)) { - spin_unlock_irqrestore(&port_priv->send_list_lock, flags); - dma_unmap_single(mad_agent->device->dma_device, - pci_unmap_addr(agent_send_wr, mapping), - sizeof(mad_priv->mad), - DMA_TO_DEVICE); - ib_destroy_ah(agent_send_wr->ah); - kfree(agent_send_wr); - } else { - list_add_tail(&agent_send_wr->send_list, - &port_priv->send_posted_list); - spin_unlock_irqrestore(&port_priv->send_list_lock, flags); - ret = 0; + memcpy(send_buf->mad, mad, sizeof *mad); + send_buf->ah = ah; + if ((ret = ib_post_send_mad(send_buf, NULL))) { + printk(KERN_ERR SPFX "ib_post_send_mad error:%d\n", ret); + goto err2; } - -out: + return 0; +err2: + ib_free_send_mad(send_buf); +err1: + ib_destroy_ah(ah); return ret; } -int agent_send(struct ib_mad_private *mad, - struct ib_grh *grh, - struct ib_wc *wc, - struct ib_device *device, - int port_num) -{ - struct ib_agent_port_private *port_priv; - struct ib_mad_agent *mad_agent; - - port_priv = ib_get_agent_port(device, port_num, NULL); - if (!port_priv) { - printk(KERN_DEBUG SPFX "agent_send %s port %d not open\n", - device->name, port_num); - return 1; - } - - /* Get mad agent based on mgmt_class in MAD */ - switch (mad->mad.mad.mad_hdr.mgmt_class) { - case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE: - case IB_MGMT_CLASS_SUBN_LID_ROUTED: - mad_agent = port_priv->smp_agent; - break; - case IB_MGMT_CLASS_PERF_MGMT: - mad_agent = port_priv->perf_mgmt_agent; - break; - default: - return 1; - } - - return agent_mad_send(mad_agent, port_priv, mad, grh, wc); -} - static void agent_send_handler(struct ib_mad_agent *mad_agent, struct ib_mad_send_wc *mad_send_wc) { - struct ib_agent_port_private *port_priv; - struct ib_agent_send_wr *agent_send_wr; - unsigned long flags; - - /* Find matching MAD agent */ - port_priv = ib_get_agent_port(NULL, 0, mad_agent); - if (!port_priv) { - printk(KERN_ERR SPFX "agent_send_handler: no matching MAD " - "agent %p\n", mad_agent); - return; - } - - agent_send_wr = (struct ib_agent_send_wr *)(unsigned long)mad_send_wc->wr_id; - spin_lock_irqsave(&port_priv->send_list_lock, flags); - /* Remove completed send from posted send MAD list */ - list_del(&agent_send_wr->send_list); - spin_unlock_irqrestore(&port_priv->send_list_lock, flags); - - dma_unmap_single(mad_agent->device->dma_device, - pci_unmap_addr(agent_send_wr, mapping), - sizeof(agent_send_wr->mad->mad), - DMA_TO_DEVICE); - - ib_destroy_ah(agent_send_wr->ah); - - /* Release allocated memory */ - kmem_cache_free(ib_mad_cache, agent_send_wr->mad); - kfree(agent_send_wr); + ib_destroy_ah(mad_send_wc->send_buf->ah); + ib_free_send_mad(mad_send_wc->send_buf); } int ib_agent_port_open(struct ib_device *device, int port_num) { - int ret; struct ib_agent_port_private *port_priv; unsigned long flags; - - /* First, check if port already open for SMI */ - port_priv = ib_get_agent_port(device, port_num, NULL); - if (port_priv) { - printk(KERN_DEBUG SPFX "%s port %d already open\n", - device->name, port_num); - return 0; - } + int ret; /* Create new device info */ port_priv = kmalloc(sizeof *port_priv, GFP_KERNEL); @@ -294,32 +161,25 @@ int ib_agent_port_open(struct ib_device *device, int port_num) ret = -ENOMEM; goto error1; } - memset(port_priv, 0, sizeof *port_priv); - port_priv->port_num = port_num; - spin_lock_init(&port_priv->send_list_lock); - INIT_LIST_HEAD(&port_priv->send_posted_list); - /* Obtain send only MAD agent for SM class (SMI QP) */ - port_priv->smp_agent = ib_register_mad_agent(device, port_num, - IB_QPT_SMI, - NULL, 0, + /* Obtain send only MAD agent for SMI QP */ + port_priv->agent[0] = ib_register_mad_agent(device, port_num, + IB_QPT_SMI, NULL, 0, &agent_send_handler, - NULL, NULL); - - if (IS_ERR(port_priv->smp_agent)) { - ret = PTR_ERR(port_priv->smp_agent); + NULL, NULL); + if (IS_ERR(port_priv->agent[0])) { + ret = PTR_ERR(port_priv->agent[0]); goto error2; } - /* Obtain send only MAD agent for PerfMgmt class (GSI QP) */ - port_priv->perf_mgmt_agent = ib_register_mad_agent(device, port_num, - IB_QPT_GSI, - NULL, 0, - &agent_send_handler, - NULL, NULL); - if (IS_ERR(port_priv->perf_mgmt_agent)) { - ret = PTR_ERR(port_priv->perf_mgmt_agent); + /* Obtain send only MAD agent for GSI QP */ + port_priv->agent[1] = ib_register_mad_agent(device, port_num, + IB_QPT_GSI, NULL, 0, + &agent_send_handler, + NULL, NULL); + if (IS_ERR(port_priv->agent[1])) { + ret = PTR_ERR(port_priv->agent[1]); goto error3; } @@ -330,7 +190,7 @@ int ib_agent_port_open(struct ib_device *device, int port_num) return 0; error3: - ib_unregister_mad_agent(port_priv->smp_agent); + ib_unregister_mad_agent(port_priv->agent[0]); error2: kfree(port_priv); error1: @@ -343,7 +203,7 @@ int ib_agent_port_close(struct ib_device *device, int port_num) unsigned long flags; spin_lock_irqsave(&ib_agent_port_list_lock, flags); - port_priv = __ib_get_agent_port(device, port_num, NULL); + port_priv = __ib_get_agent_port(device, port_num); if (port_priv == NULL) { spin_unlock_irqrestore(&ib_agent_port_list_lock, flags); printk(KERN_ERR SPFX "Port %d not found\n", port_num); @@ -352,9 +212,8 @@ int ib_agent_port_close(struct ib_device *device, int port_num) list_del(&port_priv->port_list); spin_unlock_irqrestore(&ib_agent_port_list_lock, flags); - ib_unregister_mad_agent(port_priv->perf_mgmt_agent); - ib_unregister_mad_agent(port_priv->smp_agent); + ib_unregister_mad_agent(port_priv->agent[1]); + ib_unregister_mad_agent(port_priv->agent[0]); kfree(port_priv); - return 0; } diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h index d9426842254a..c5f3cfec942a 100644 --- a/drivers/infiniband/core/agent.h +++ b/drivers/infiniband/core/agent.h @@ -39,17 +39,14 @@ #ifndef __AGENT_H_ #define __AGENT_H_ -extern spinlock_t ib_agent_port_list_lock; +#include -extern int ib_agent_port_open(struct ib_device *device, - int port_num); +extern int ib_agent_port_open(struct ib_device *device, int port_num); extern int ib_agent_port_close(struct ib_device *device, int port_num); -extern int agent_send(struct ib_mad_private *mad, - struct ib_grh *grh, - struct ib_wc *wc, - struct ib_device *device, - int port_num); +extern int agent_send_response(struct ib_mad *mad, struct ib_grh *grh, + struct ib_wc *wc, struct ib_device *device, + int port_num, int qpn); #endif /* __AGENT_H_ */ diff --git a/drivers/infiniband/core/agent_priv.h b/drivers/infiniband/core/agent_priv.h deleted file mode 100644 index 2ec6d7f1b7d0..000000000000 --- a/drivers/infiniband/core/agent_priv.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (c) 2004, 2005 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004, 2005 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. - * Copyright (c) 2004, 2005 Topspin Corporation. All rights reserved. - * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: agent_priv.h 1640 2005-01-24 22:39:02Z halr $ - */ - -#ifndef __IB_AGENT_PRIV_H__ -#define __IB_AGENT_PRIV_H__ - -#include - -#define SPFX "ib_agent: " - -struct ib_agent_send_wr { - struct list_head send_list; - struct ib_ah *ah; - struct ib_mad_private *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) -}; - -struct ib_agent_port_private { - struct list_head port_list; - struct list_head send_posted_list; - spinlock_t send_list_lock; - int port_num; - struct ib_mad_agent *smp_agent; /* SM class */ - struct ib_mad_agent *perf_mgmt_agent; /* PerfMgmt class */ -}; - -#endif /* __IB_AGENT_PRIV_H__ */ diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 389fecbaf662..580c3a2bb102 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -176,8 +176,7 @@ static int cm_alloc_msg(struct cm_id_private *cm_id_priv, m = ib_create_send_mad(mad_agent, cm_id_priv->id.remote_cm_qpn, cm_id_priv->av.pkey_index, - ah, 0, sizeof(struct ib_mad_hdr), - sizeof(struct ib_mad)-sizeof(struct ib_mad_hdr), + 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, GFP_ATOMIC); if (IS_ERR(m)) { ib_destroy_ah(ah); @@ -185,7 +184,8 @@ static int cm_alloc_msg(struct cm_id_private *cm_id_priv, } /* Timeout set by caller if response is expected. */ - m->send_wr.wr.ud.retries = cm_id_priv->max_cm_retries; + m->ah = ah; + m->retries = cm_id_priv->max_cm_retries; atomic_inc(&cm_id_priv->refcount); m->context[0] = cm_id_priv; @@ -206,20 +206,20 @@ static int cm_alloc_response_msg(struct cm_port *port, return PTR_ERR(ah); m = ib_create_send_mad(port->mad_agent, 1, mad_recv_wc->wc->pkey_index, - ah, 0, sizeof(struct ib_mad_hdr), - sizeof(struct ib_mad)-sizeof(struct ib_mad_hdr), + 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, GFP_ATOMIC); if (IS_ERR(m)) { ib_destroy_ah(ah); return PTR_ERR(m); } + m->ah = ah; *msg = m; return 0; } static void cm_free_msg(struct ib_mad_send_buf *msg) { - ib_destroy_ah(msg->send_wr.wr.ud.ah); + ib_destroy_ah(msg->ah); if (msg->context[0]) cm_deref_id(msg->context[0]); ib_free_send_mad(msg); @@ -678,8 +678,7 @@ retest: break; case IB_CM_SIDR_REQ_SENT: cm_id->state = IB_CM_IDLE; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); spin_unlock_irqrestore(&cm_id_priv->lock, flags); break; case IB_CM_SIDR_REQ_RCVD: @@ -690,8 +689,7 @@ retest: case IB_CM_MRA_REQ_RCVD: case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); /* Fall through */ case IB_CM_REQ_RCVD: case IB_CM_MRA_REQ_SENT: @@ -708,8 +706,7 @@ retest: ib_send_cm_dreq(cm_id, NULL, 0); goto retest; case IB_CM_DREQ_SENT: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); cm_enter_timewait(cm_id_priv); spin_unlock_irqrestore(&cm_id_priv->lock, flags); break; @@ -883,7 +880,6 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, struct ib_cm_req_param *param) { struct cm_id_private *cm_id_priv; - struct ib_send_wr *bad_send_wr; struct cm_req_msg *req_msg; unsigned long flags; int ret; @@ -936,7 +932,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, req_msg = (struct cm_req_msg *) cm_id_priv->msg->mad; cm_format_req(req_msg, cm_id_priv, param); cm_id_priv->tid = req_msg->hdr.tid; - cm_id_priv->msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + cm_id_priv->msg->timeout_ms = cm_id_priv->timeout_ms; cm_id_priv->msg->context[1] = (void *) (unsigned long) IB_CM_REQ_SENT; cm_id_priv->local_qpn = cm_req_get_local_qpn(req_msg); @@ -945,8 +941,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_req_get_primary_local_ack_timeout(req_msg); spin_lock_irqsave(&cm_id_priv->lock, flags); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &cm_id_priv->msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(cm_id_priv->msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); goto error2; @@ -969,7 +964,6 @@ static int cm_issue_rej(struct cm_port *port, void *ari, u8 ari_length) { struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; struct cm_rej_msg *rej_msg, *rcv_msg; int ret; @@ -992,7 +986,7 @@ static int cm_issue_rej(struct cm_port *port, memcpy(rej_msg->ari, ari, ari_length); } - ret = ib_post_send_mad(port->mad_agent, &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) cm_free_msg(msg); @@ -1172,7 +1166,6 @@ static void cm_dup_req_handler(struct cm_work *work, struct cm_id_private *cm_id_priv) { struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1201,8 +1194,7 @@ static void cm_dup_req_handler(struct cm_work *work, } spin_unlock_irqrestore(&cm_id_priv->lock, flags); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr, - &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto free; return; @@ -1367,7 +1359,6 @@ int ib_send_cm_rep(struct ib_cm_id *cm_id, struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; struct cm_rep_msg *rep_msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1389,11 +1380,10 @@ int ib_send_cm_rep(struct ib_cm_id *cm_id, rep_msg = (struct cm_rep_msg *) msg->mad; cm_format_rep(rep_msg, cm_id_priv, param); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_REP_SENT; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -1431,7 +1421,6 @@ int ib_send_cm_rtu(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; void *data; int ret; @@ -1458,8 +1447,7 @@ int ib_send_cm_rtu(struct ib_cm_id *cm_id, cm_format_rtu((struct cm_rtu_msg *) msg->mad, cm_id_priv, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -1504,7 +1492,6 @@ static void cm_dup_rep_handler(struct cm_work *work) struct cm_id_private *cm_id_priv; struct cm_rep_msg *rep_msg; struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1532,8 +1519,7 @@ static void cm_dup_rep_handler(struct cm_work *work) goto unlock; spin_unlock_irqrestore(&cm_id_priv->lock, flags); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr, - &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto free; goto deref; @@ -1601,8 +1587,7 @@ static int cm_rep_handler(struct cm_work *work) /* todo: handle peer_to_peer */ - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1636,8 +1621,7 @@ static int cm_establish_handler(struct cm_work *work) goto out; } - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1676,8 +1660,7 @@ static int cm_rtu_handler(struct cm_work *work) } cm_id_priv->id.state = IB_CM_ESTABLISHED; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1714,7 +1697,6 @@ int ib_send_cm_dreq(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1736,11 +1718,10 @@ int ib_send_cm_dreq(struct ib_cm_id *cm_id, cm_format_dreq((struct cm_dreq_msg *) msg->mad, cm_id_priv, private_data, private_data_len); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_DREQ_SENT; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { cm_enter_timewait(cm_id_priv); spin_unlock_irqrestore(&cm_id_priv->lock, flags); @@ -1774,7 +1755,6 @@ int ib_send_cm_drep(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; void *data; int ret; @@ -1804,8 +1784,7 @@ int ib_send_cm_drep(struct ib_cm_id *cm_id, cm_format_drep((struct cm_drep_msg *) msg->mad, cm_id_priv, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr, - &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -1822,7 +1801,6 @@ static int cm_dreq_handler(struct cm_work *work) struct cm_id_private *cm_id_priv; struct cm_dreq_msg *dreq_msg; struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1841,8 +1819,7 @@ static int cm_dreq_handler(struct cm_work *work) switch (cm_id_priv->id.state) { case IB_CM_REP_SENT: case IB_CM_DREQ_SENT: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); break; case IB_CM_ESTABLISHED: case IB_CM_MRA_REP_RCVD: @@ -1856,8 +1833,7 @@ static int cm_dreq_handler(struct cm_work *work) cm_id_priv->private_data_len); spin_unlock_irqrestore(&cm_id_priv->lock, flags); - if (ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr)) + if (ib_post_send_mad(msg, NULL)) cm_free_msg(msg); goto deref; default: @@ -1904,8 +1880,7 @@ static int cm_drep_handler(struct cm_work *work) } cm_enter_timewait(cm_id_priv); - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1930,7 +1905,6 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1974,8 +1948,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id, if (ret) goto out; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) cm_free_msg(msg); @@ -2051,8 +2024,7 @@ static int cm_rej_handler(struct cm_work *work) case IB_CM_MRA_REQ_RCVD: case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); /* fall through */ case IB_CM_REQ_RCVD: case IB_CM_MRA_REQ_SENT: @@ -2062,8 +2034,7 @@ static int cm_rej_handler(struct cm_work *work) cm_reset_to_idle(cm_id_priv); break; case IB_CM_DREQ_SENT: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); /* fall through */ case IB_CM_REP_RCVD: case IB_CM_MRA_REP_SENT: @@ -2098,7 +2069,6 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; void *data; unsigned long flags; int ret; @@ -2122,8 +2092,7 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv, CM_MSG_RESPONSE_REQ, service_timeout, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto error2; cm_id->state = IB_CM_MRA_REQ_SENT; @@ -2136,8 +2105,7 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv, CM_MSG_RESPONSE_REP, service_timeout, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto error2; cm_id->state = IB_CM_MRA_REP_SENT; @@ -2150,8 +2118,7 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv, CM_MSG_RESPONSE_OTHER, service_timeout, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto error2; cm_id->lap_state = IB_CM_MRA_LAP_SENT; @@ -2213,14 +2180,14 @@ static int cm_mra_handler(struct cm_work *work) case IB_CM_REQ_SENT: if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_REQ || ib_modify_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) goto out; cm_id_priv->id.state = IB_CM_MRA_REQ_RCVD; break; case IB_CM_REP_SENT: if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_REP || ib_modify_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) goto out; cm_id_priv->id.state = IB_CM_MRA_REP_RCVD; break; @@ -2228,7 +2195,7 @@ static int cm_mra_handler(struct cm_work *work) if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_OTHER || cm_id_priv->id.lap_state != IB_CM_LAP_SENT || ib_modify_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) goto out; cm_id_priv->id.lap_state = IB_CM_MRA_LAP_RCVD; break; @@ -2291,7 +2258,6 @@ int ib_send_cm_lap(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2312,11 +2278,10 @@ int ib_send_cm_lap(struct ib_cm_id *cm_id, cm_format_lap((struct cm_lap_msg *) msg->mad, cm_id_priv, alternate_path, private_data, private_data_len); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_ESTABLISHED; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -2360,7 +2325,6 @@ static int cm_lap_handler(struct cm_work *work) struct cm_lap_msg *lap_msg; struct ib_cm_lap_event_param *param; struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2394,8 +2358,7 @@ static int cm_lap_handler(struct cm_work *work) cm_id_priv->private_data_len); spin_unlock_irqrestore(&cm_id_priv->lock, flags); - if (ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr)) + if (ib_post_send_mad(msg, NULL)) cm_free_msg(msg); goto deref; default: @@ -2451,7 +2414,6 @@ int ib_send_cm_apr(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2474,8 +2436,7 @@ int ib_send_cm_apr(struct ib_cm_id *cm_id, cm_format_apr((struct cm_apr_msg *) msg->mad, cm_id_priv, status, info, info_length, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -2514,8 +2475,7 @@ static int cm_apr_handler(struct cm_work *work) goto out; } cm_id_priv->id.lap_state = IB_CM_LAP_IDLE; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); cm_id_priv->msg = NULL; ret = atomic_inc_and_test(&cm_id_priv->work_count); @@ -2590,7 +2550,6 @@ int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2613,13 +2572,12 @@ int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, cm_format_sidr_req((struct cm_sidr_req_msg *) msg->mad, cm_id_priv, param); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_SIDR_REQ_SENT; spin_lock_irqsave(&cm_id_priv->lock, flags); if (cm_id->state == IB_CM_IDLE) - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); else ret = -EINVAL; @@ -2733,7 +2691,6 @@ int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2755,8 +2712,7 @@ int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id, cm_format_sidr_rep((struct cm_sidr_rep_msg *) msg->mad, cm_id_priv, param); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -2809,8 +2765,7 @@ static int cm_sidr_rep_handler(struct cm_work *work) goto out; } cm_id_priv->id.state = IB_CM_IDLE; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_format_sidr_rep_event(work); @@ -2878,9 +2833,7 @@ discard: static void cm_send_handler(struct ib_mad_agent *mad_agent, struct ib_mad_send_wc *mad_send_wc) { - struct ib_mad_send_buf *msg; - - msg = (struct ib_mad_send_buf *)(unsigned long)mad_send_wc->wr_id; + struct ib_mad_send_buf *msg = mad_send_wc->send_buf; switch (mad_send_wc->status) { case IB_WC_SUCCESS: diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index af302e830561..88f9f8c9eacc 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -579,7 +579,7 @@ static void dequeue_mad(struct ib_mad_list_head *mad_list) } static void snoop_send(struct ib_mad_qp_info *qp_info, - struct ib_send_wr *send_wr, + struct ib_mad_send_buf *send_buf, struct ib_mad_send_wc *mad_send_wc, int mad_snoop_flags) { @@ -597,7 +597,7 @@ static void snoop_send(struct ib_mad_qp_info *qp_info, atomic_inc(&mad_snoop_priv->refcount); spin_unlock_irqrestore(&qp_info->snoop_lock, flags); mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent, - send_wr, mad_send_wc); + send_buf, mad_send_wc); if (atomic_dec_and_test(&mad_snoop_priv->refcount)) wake_up(&mad_snoop_priv->wait); spin_lock_irqsave(&qp_info->snoop_lock, flags); @@ -654,10 +654,10 @@ static void build_smp_wc(u64 wr_id, u16 slid, u16 pkey_index, u8 port_num, * Return < 0 if error */ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, - struct ib_smp *smp, - struct ib_send_wr *send_wr) + struct ib_mad_send_wr_private *mad_send_wr) { int ret; + struct ib_smp *smp = mad_send_wr->send_buf.mad; unsigned long flags; struct ib_mad_local_private *local; struct ib_mad_private *mad_priv; @@ -666,6 +666,7 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, struct ib_device *device = mad_agent_priv->agent.device; u8 port_num = mad_agent_priv->agent.port_num; struct ib_wc mad_wc; + struct ib_send_wr *send_wr = &mad_send_wr->send_wr; if (!smi_handle_dr_smp_send(smp, device->node_type, port_num)) { ret = -EINVAL; @@ -745,13 +746,7 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, goto out; } - local->send_wr = *send_wr; - local->send_wr.sg_list = local->sg_list; - memcpy(local->sg_list, send_wr->sg_list, - sizeof *send_wr->sg_list * send_wr->num_sge); - local->send_wr.next = NULL; - local->tid = send_wr->wr.ud.mad_hdr->tid; - local->wr_id = send_wr->wr_id; + local->mad_send_wr = mad_send_wr; /* Reference MAD agent until send side of local completion handled */ atomic_inc(&mad_agent_priv->refcount); /* Queue local completion to local list */ @@ -781,17 +776,17 @@ static int get_buf_length(int hdr_len, int data_len) struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, - struct ib_ah *ah, int rmpp_active, + int rmpp_active, int hdr_len, int data_len, gfp_t gfp_mask) { struct ib_mad_agent_private *mad_agent_priv; - struct ib_mad_send_buf *send_buf; + struct ib_mad_send_wr_private *mad_send_wr; int buf_size; void *buf; - mad_agent_priv = container_of(mad_agent, - struct ib_mad_agent_private, agent); + mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private, + agent); buf_size = get_buf_length(hdr_len, data_len); if ((!mad_agent->rmpp_version && @@ -799,45 +794,40 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, (!rmpp_active && buf_size > sizeof(struct ib_mad))) return ERR_PTR(-EINVAL); - buf = kmalloc(sizeof *send_buf + buf_size, gfp_mask); + buf = kmalloc(sizeof *mad_send_wr + buf_size, gfp_mask); if (!buf) return ERR_PTR(-ENOMEM); - memset(buf, 0, sizeof *send_buf + buf_size); - - send_buf = buf + buf_size; - send_buf->mad = buf; - - send_buf->sge.addr = dma_map_single(mad_agent->device->dma_device, - buf, buf_size, DMA_TO_DEVICE); - pci_unmap_addr_set(send_buf, mapping, send_buf->sge.addr); - send_buf->sge.length = buf_size; - send_buf->sge.lkey = mad_agent->mr->lkey; - - send_buf->send_wr.wr_id = (unsigned long) send_buf; - send_buf->send_wr.sg_list = &send_buf->sge; - send_buf->send_wr.num_sge = 1; - send_buf->send_wr.opcode = IB_WR_SEND; - send_buf->send_wr.send_flags = IB_SEND_SIGNALED; - send_buf->send_wr.wr.ud.ah = ah; - send_buf->send_wr.wr.ud.mad_hdr = &send_buf->mad->mad_hdr; - send_buf->send_wr.wr.ud.remote_qpn = remote_qpn; - send_buf->send_wr.wr.ud.remote_qkey = IB_QP_SET_QKEY; - send_buf->send_wr.wr.ud.pkey_index = pkey_index; + memset(buf, 0, sizeof *mad_send_wr + buf_size); + + mad_send_wr = buf + buf_size; + mad_send_wr->send_buf.mad = buf; + + mad_send_wr->mad_agent_priv = mad_agent_priv; + mad_send_wr->sg_list[0].length = buf_size; + mad_send_wr->sg_list[0].lkey = mad_agent->mr->lkey; + + mad_send_wr->send_wr.wr_id = (unsigned long) mad_send_wr; + mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list; + mad_send_wr->send_wr.num_sge = 1; + mad_send_wr->send_wr.opcode = IB_WR_SEND; + mad_send_wr->send_wr.send_flags = IB_SEND_SIGNALED; + mad_send_wr->send_wr.wr.ud.remote_qpn = remote_qpn; + mad_send_wr->send_wr.wr.ud.remote_qkey = IB_QP_SET_QKEY; + mad_send_wr->send_wr.wr.ud.pkey_index = pkey_index; if (rmpp_active) { - struct ib_rmpp_mad *rmpp_mad; - rmpp_mad = (struct ib_rmpp_mad *)send_buf->mad; + struct ib_rmpp_mad *rmpp_mad = mad_send_wr->send_buf.mad; rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(hdr_len - - offsetof(struct ib_rmpp_mad, data) + data_len); + IB_MGMT_RMPP_HDR + data_len); rmpp_mad->rmpp_hdr.rmpp_version = mad_agent->rmpp_version; rmpp_mad->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_DATA; ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); } - send_buf->mad_agent = mad_agent; + mad_send_wr->send_buf.mad_agent = mad_agent; atomic_inc(&mad_agent_priv->refcount); - return send_buf; + return &mad_send_wr->send_buf; } EXPORT_SYMBOL(ib_create_send_mad); @@ -847,10 +837,6 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf) mad_agent_priv = container_of(send_buf->mad_agent, struct ib_mad_agent_private, agent); - - dma_unmap_single(send_buf->mad_agent->device->dma_device, - pci_unmap_addr(send_buf, mapping), - send_buf->sge.length, DMA_TO_DEVICE); kfree(send_buf->mad); if (atomic_dec_and_test(&mad_agent_priv->refcount)) @@ -861,8 +847,10 @@ EXPORT_SYMBOL(ib_free_send_mad); int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) { struct ib_mad_qp_info *qp_info; - struct ib_send_wr *bad_send_wr; struct list_head *list; + struct ib_send_wr *bad_send_wr; + struct ib_mad_agent *mad_agent; + struct ib_sge *sge; unsigned long flags; int ret; @@ -871,10 +859,17 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) mad_send_wr->send_wr.wr_id = (unsigned long)&mad_send_wr->mad_list; mad_send_wr->mad_list.mad_queue = &qp_info->send_queue; + mad_agent = mad_send_wr->send_buf.mad_agent; + sge = mad_send_wr->sg_list; + sge->addr = dma_map_single(mad_agent->device->dma_device, + mad_send_wr->send_buf.mad, sge->length, + DMA_TO_DEVICE); + pci_unmap_addr_set(mad_send_wr, mapping, sge->addr); + spin_lock_irqsave(&qp_info->send_queue.lock, flags); if (qp_info->send_queue.count < qp_info->send_queue.max_active) { - ret = ib_post_send(mad_send_wr->mad_agent_priv->agent.qp, - &mad_send_wr->send_wr, &bad_send_wr); + ret = ib_post_send(mad_agent->qp, &mad_send_wr->send_wr, + &bad_send_wr); list = &qp_info->send_queue.list; } else { ret = 0; @@ -886,6 +881,11 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) list_add_tail(&mad_send_wr->mad_list.list, list); } spin_unlock_irqrestore(&qp_info->send_queue.lock, flags); + if (ret) + dma_unmap_single(mad_agent->device->dma_device, + pci_unmap_addr(mad_send_wr, mapping), + sge->length, DMA_TO_DEVICE); + return ret; } @@ -893,45 +893,28 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated * with the registered client */ -int ib_post_send_mad(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr) +int ib_post_send_mad(struct ib_mad_send_buf *send_buf, + struct ib_mad_send_buf **bad_send_buf) { - int ret = -EINVAL; struct ib_mad_agent_private *mad_agent_priv; - - /* Validate supplied parameters */ - if (!bad_send_wr) - goto error1; - - if (!mad_agent || !send_wr) - goto error2; - - if (!mad_agent->send_handler) - goto error2; - - mad_agent_priv = container_of(mad_agent, - struct ib_mad_agent_private, - agent); + struct ib_mad_send_buf *next_send_buf; + struct ib_mad_send_wr_private *mad_send_wr; + unsigned long flags; + int ret = -EINVAL; /* Walk list of send WRs and post each on send list */ - while (send_wr) { - unsigned long flags; - struct ib_send_wr *next_send_wr; - struct ib_mad_send_wr_private *mad_send_wr; - struct ib_smp *smp; - - /* Validate more parameters */ - if (send_wr->num_sge > IB_MAD_SEND_REQ_MAX_SG) - goto error2; + for (; send_buf; send_buf = next_send_buf) { - if (send_wr->wr.ud.timeout_ms && !mad_agent->recv_handler) - goto error2; + mad_send_wr = container_of(send_buf, + struct ib_mad_send_wr_private, + send_buf); + mad_agent_priv = mad_send_wr->mad_agent_priv; - if (!send_wr->wr.ud.mad_hdr) { - printk(KERN_ERR PFX "MAD header must be supplied " - "in WR %p\n", send_wr); - goto error2; + if (!send_buf->mad_agent->send_handler || + (send_buf->timeout_ms && + !send_buf->mad_agent->recv_handler)) { + ret = -EINVAL; + goto error; } /* @@ -939,40 +922,24 @@ int ib_post_send_mad(struct ib_mad_agent *mad_agent, * current one completes, and the user modifies the work * request associated with the completion */ - next_send_wr = (struct ib_send_wr *)send_wr->next; + next_send_buf = send_buf->next; + mad_send_wr->send_wr.wr.ud.ah = send_buf->ah; - smp = (struct ib_smp *)send_wr->wr.ud.mad_hdr; - if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) { - ret = handle_outgoing_dr_smp(mad_agent_priv, smp, - send_wr); + if (((struct ib_mad_hdr *) send_buf->mad)->mgmt_class == + IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) { + ret = handle_outgoing_dr_smp(mad_agent_priv, + mad_send_wr); if (ret < 0) /* error */ - goto error2; + goto error; else if (ret == 1) /* locally consumed */ - goto next; + continue; } - /* Allocate MAD send WR tracking structure */ - mad_send_wr = kmalloc(sizeof *mad_send_wr, GFP_ATOMIC); - if (!mad_send_wr) { - printk(KERN_ERR PFX "No memory for " - "ib_mad_send_wr_private\n"); - ret = -ENOMEM; - goto error2; - } - memset(mad_send_wr, 0, sizeof *mad_send_wr); - - mad_send_wr->send_wr = *send_wr; - mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list; - memcpy(mad_send_wr->sg_list, send_wr->sg_list, - sizeof *send_wr->sg_list * send_wr->num_sge); - mad_send_wr->wr_id = send_wr->wr_id; - mad_send_wr->tid = send_wr->wr.ud.mad_hdr->tid; - mad_send_wr->mad_agent_priv = mad_agent_priv; + mad_send_wr->tid = ((struct ib_mad_hdr *) send_buf->mad)->tid; /* Timeout will be updated after send completes */ - mad_send_wr->timeout = msecs_to_jiffies(send_wr->wr. - ud.timeout_ms); - mad_send_wr->retries = mad_send_wr->send_wr.wr.ud.retries; - /* One reference for each work request to QP + response */ + mad_send_wr->timeout = msecs_to_jiffies(send_buf->timeout_ms); + mad_send_wr->retries = send_buf->retries; + /* Reference for work request to QP + response */ mad_send_wr->refcount = 1 + (mad_send_wr->timeout > 0); mad_send_wr->status = IB_WC_SUCCESS; @@ -995,16 +962,13 @@ int ib_post_send_mad(struct ib_mad_agent *mad_agent, list_del(&mad_send_wr->agent_list); spin_unlock_irqrestore(&mad_agent_priv->lock, flags); atomic_dec(&mad_agent_priv->refcount); - goto error2; + goto error; } -next: - send_wr = next_send_wr; } return 0; - -error2: - *bad_send_wr = send_wr; -error1: +error: + if (bad_send_buf) + *bad_send_buf = send_buf; return ret; } EXPORT_SYMBOL(ib_post_send_mad); @@ -1447,8 +1411,7 @@ find_mad_agent(struct ib_mad_port_private *port_priv, * of MAD. */ hi_tid = be64_to_cpu(mad->mad_hdr.tid) >> 32; - list_for_each_entry(entry, &port_priv->agent_list, - agent_list) { + list_for_each_entry(entry, &port_priv->agent_list, agent_list) { if (entry->agent.hi_tid == hi_tid) { mad_agent = entry; break; @@ -1571,8 +1534,7 @@ ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, __be64 tid) */ list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list, agent_list) { - if (is_data_mad(mad_agent_priv, - mad_send_wr->send_wr.wr.ud.mad_hdr) && + if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) && mad_send_wr->tid == tid && mad_send_wr->timeout) { /* Verify request has not been canceled */ return (mad_send_wr->status == IB_WC_SUCCESS) ? @@ -1628,14 +1590,14 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv, spin_unlock_irqrestore(&mad_agent_priv->lock, flags); /* Defined behavior is to complete response before request */ - mad_recv_wc->wc->wr_id = mad_send_wr->wr_id; + mad_recv_wc->wc->wr_id = (unsigned long) &mad_send_wr->send_buf; mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent, mad_recv_wc); atomic_dec(&mad_agent_priv->refcount); mad_send_wc.status = IB_WC_SUCCESS; mad_send_wc.vendor_err = 0; - mad_send_wc.wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; ib_mad_complete_send_wr(mad_send_wr, &mad_send_wc); } else { mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent, @@ -1728,11 +1690,11 @@ local: if (ret & IB_MAD_RESULT_CONSUMED) goto out; if (ret & IB_MAD_RESULT_REPLY) { - /* Send response */ - if (!agent_send(response, &recv->grh, wc, - port_priv->device, - port_priv->port_num)) - response = NULL; + agent_send_response(&response->mad.mad, + &recv->grh, wc, + port_priv->device, + port_priv->port_num, + qp_info->qp->qp_num); goto out; } } @@ -1866,15 +1828,15 @@ void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr, if (mad_send_wr->status != IB_WC_SUCCESS ) mad_send_wc->status = mad_send_wr->status; - if (ret != IB_RMPP_RESULT_INTERNAL) + if (ret == IB_RMPP_RESULT_INTERNAL) + ib_rmpp_send_handler(mad_send_wc); + else mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, mad_send_wc); /* Release reference on agent taken when sending */ if (atomic_dec_and_test(&mad_agent_priv->refcount)) wake_up(&mad_agent_priv->wait); - - kfree(mad_send_wr); return; done: spin_unlock_irqrestore(&mad_agent_priv->lock, flags); @@ -1888,6 +1850,7 @@ static void ib_mad_send_done_handler(struct ib_mad_port_private *port_priv, struct ib_mad_qp_info *qp_info; struct ib_mad_queue *send_queue; struct ib_send_wr *bad_send_wr; + struct ib_mad_send_wc mad_send_wc; unsigned long flags; int ret; @@ -1898,6 +1861,9 @@ static void ib_mad_send_done_handler(struct ib_mad_port_private *port_priv, qp_info = send_queue->qp_info; retry: + dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device, + pci_unmap_addr(mad_send_wr, mapping), + mad_send_wr->sg_list[0].length, DMA_TO_DEVICE); queued_send_wr = NULL; spin_lock_irqsave(&send_queue->lock, flags); list_del(&mad_list->list); @@ -1914,17 +1880,17 @@ retry: } spin_unlock_irqrestore(&send_queue->lock, flags); - /* Restore client wr_id in WC and complete send */ - wc->wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; + mad_send_wc.status = wc->status; + mad_send_wc.vendor_err = wc->vendor_err; if (atomic_read(&qp_info->snoop_count)) - snoop_send(qp_info, &mad_send_wr->send_wr, - (struct ib_mad_send_wc *)wc, + snoop_send(qp_info, &mad_send_wr->send_buf, &mad_send_wc, IB_MAD_SNOOP_SEND_COMPLETIONS); - ib_mad_complete_send_wr(mad_send_wr, (struct ib_mad_send_wc *)wc); + ib_mad_complete_send_wr(mad_send_wr, &mad_send_wc); if (queued_send_wr) { ret = ib_post_send(qp_info->qp, &queued_send_wr->send_wr, - &bad_send_wr); + &bad_send_wr); if (ret) { printk(KERN_ERR PFX "ib_post_send failed: %d\n", ret); mad_send_wr = queued_send_wr; @@ -2066,38 +2032,37 @@ static void cancel_mads(struct ib_mad_agent_private *mad_agent_priv) list_for_each_entry_safe(mad_send_wr, temp_mad_send_wr, &cancel_list, agent_list) { - mad_send_wc.wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; + list_del(&mad_send_wr->agent_list); mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, &mad_send_wc); - - list_del(&mad_send_wr->agent_list); - kfree(mad_send_wr); atomic_dec(&mad_agent_priv->refcount); } } static struct ib_mad_send_wr_private* -find_send_by_wr_id(struct ib_mad_agent_private *mad_agent_priv, u64 wr_id) +find_send_wr(struct ib_mad_agent_private *mad_agent_priv, + struct ib_mad_send_buf *send_buf) { struct ib_mad_send_wr_private *mad_send_wr; list_for_each_entry(mad_send_wr, &mad_agent_priv->wait_list, agent_list) { - if (mad_send_wr->wr_id == wr_id) + if (&mad_send_wr->send_buf == send_buf) return mad_send_wr; } list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list, agent_list) { - if (is_data_mad(mad_agent_priv, - mad_send_wr->send_wr.wr.ud.mad_hdr) && - mad_send_wr->wr_id == wr_id) + if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) && + &mad_send_wr->send_buf == send_buf) return mad_send_wr; } return NULL; } -int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) +int ib_modify_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf, u32 timeout_ms) { struct ib_mad_agent_private *mad_agent_priv; struct ib_mad_send_wr_private *mad_send_wr; @@ -2107,7 +2072,7 @@ int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private, agent); spin_lock_irqsave(&mad_agent_priv->lock, flags); - mad_send_wr = find_send_by_wr_id(mad_agent_priv, wr_id); + mad_send_wr = find_send_wr(mad_agent_priv, send_buf); if (!mad_send_wr || mad_send_wr->status != IB_WC_SUCCESS) { spin_unlock_irqrestore(&mad_agent_priv->lock, flags); return -EINVAL; @@ -2119,7 +2084,7 @@ int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) mad_send_wr->refcount -= (mad_send_wr->timeout > 0); } - mad_send_wr->send_wr.wr.ud.timeout_ms = timeout_ms; + mad_send_wr->send_buf.timeout_ms = timeout_ms; if (active) mad_send_wr->timeout = msecs_to_jiffies(timeout_ms); else @@ -2130,9 +2095,10 @@ int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) } EXPORT_SYMBOL(ib_modify_mad); -void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id) +void ib_cancel_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf) { - ib_modify_mad(mad_agent, wr_id, 0); + ib_modify_mad(mad_agent, send_buf, 0); } EXPORT_SYMBOL(ib_cancel_mad); @@ -2166,10 +2132,9 @@ static void local_completions(void *data) * Defined behavior is to complete response * before request */ - build_smp_wc(local->wr_id, + build_smp_wc((unsigned long) local->mad_send_wr, be16_to_cpu(IB_LID_PERMISSIVE), - 0 /* pkey index */, - recv_mad_agent->agent.port_num, &wc); + 0, recv_mad_agent->agent.port_num, &wc); local->mad_priv->header.recv_wc.wc = &wc; local->mad_priv->header.recv_wc.mad_len = @@ -2196,11 +2161,11 @@ local_send_completion: /* Complete send */ mad_send_wc.status = IB_WC_SUCCESS; mad_send_wc.vendor_err = 0; - mad_send_wc.wr_id = local->wr_id; + mad_send_wc.send_buf = &local->mad_send_wr->send_buf; if (atomic_read(&mad_agent_priv->qp_info->snoop_count)) - snoop_send(mad_agent_priv->qp_info, &local->send_wr, - &mad_send_wc, - IB_MAD_SNOOP_SEND_COMPLETIONS); + snoop_send(mad_agent_priv->qp_info, + &local->mad_send_wr->send_buf, + &mad_send_wc, IB_MAD_SNOOP_SEND_COMPLETIONS); mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, &mad_send_wc); @@ -2221,8 +2186,7 @@ static int retry_send(struct ib_mad_send_wr_private *mad_send_wr) if (!mad_send_wr->retries--) return -ETIMEDOUT; - mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_wr. - wr.ud.timeout_ms); + mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms); if (mad_send_wr->mad_agent_priv->agent.rmpp_version) { ret = ib_retry_rmpp(mad_send_wr); @@ -2285,11 +2249,10 @@ static void timeout_sends(void *data) mad_send_wc.status = IB_WC_RESP_TIMEOUT_ERR; else mad_send_wc.status = mad_send_wr->status; - mad_send_wc.wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, &mad_send_wc); - kfree(mad_send_wr); atomic_dec(&mad_agent_priv->refcount); spin_lock_irqsave(&mad_agent_priv->lock, flags); } @@ -2761,7 +2724,6 @@ static int __init ib_mad_init_module(void) int ret; spin_lock_init(&ib_mad_port_list_lock); - spin_lock_init(&ib_agent_port_list_lock); ib_mad_cache = kmem_cache_create("ib_mad", sizeof(struct ib_mad_private), diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index f1ba794e0daa..570f78682af3 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -118,9 +118,10 @@ struct ib_mad_send_wr_private { struct ib_mad_list_head mad_list; struct list_head agent_list; struct ib_mad_agent_private *mad_agent_priv; + struct ib_mad_send_buf send_buf; + DECLARE_PCI_UNMAP_ADDR(mapping) struct ib_send_wr send_wr; struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; - u64 wr_id; /* client WR ID */ __be64 tid; unsigned long timeout; int retries; @@ -141,10 +142,7 @@ struct ib_mad_local_private { struct list_head completion_list; struct ib_mad_private *mad_priv; struct ib_mad_agent_private *recv_mad_agent; - struct ib_send_wr send_wr; - struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; - u64 wr_id; /* client WR ID */ - __be64 tid; + struct ib_mad_send_wr_private *mad_send_wr; }; struct ib_mad_mgmt_method_table { diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index e23836d0e21b..ba112cd5f93c 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -103,12 +103,12 @@ void ib_cancel_rmpp_recvs(struct ib_mad_agent_private *agent) static int data_offset(u8 mgmt_class) { if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM) - return offsetof(struct ib_sa_mad, data); + return IB_MGMT_SA_HDR; else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) && (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) - return offsetof(struct ib_vendor_mad, data); + return IB_MGMT_VENDOR_HDR; else - return offsetof(struct ib_rmpp_mad, data); + return IB_MGMT_RMPP_HDR; } static void format_ack(struct ib_rmpp_mad *ack, @@ -135,21 +135,18 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv, struct ib_mad_recv_wc *recv_wc) { struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; - int hdr_len, ret; + int ret; - hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, rmpp_recv->ah, 1, - hdr_len, sizeof(struct ib_rmpp_mad) - hdr_len, - GFP_KERNEL); + recv_wc->wc->pkey_index, 1, IB_MGMT_RMPP_HDR, + IB_MGMT_RMPP_DATA, GFP_KERNEL); if (!msg) return; - format_ack((struct ib_rmpp_mad *) msg->mad, - (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv); - ret = ib_post_send_mad(&rmpp_recv->agent->agent, &msg->send_wr, - &bad_send_wr); + format_ack(msg->mad, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, + rmpp_recv); + msg->ah = rmpp_recv->ah; + ret = ib_post_send_mad(msg, NULL); if (ret) ib_free_send_mad(msg); } @@ -160,30 +157,31 @@ static int alloc_response_msg(struct ib_mad_agent *agent, { struct ib_mad_send_buf *m; struct ib_ah *ah; - int hdr_len; ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc, recv_wc->recv_buf.grh, agent->port_num); if (IS_ERR(ah)) return PTR_ERR(ah); - hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); m = ib_create_send_mad(agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, ah, 1, hdr_len, - sizeof(struct ib_rmpp_mad) - hdr_len, - GFP_KERNEL); + recv_wc->wc->pkey_index, 1, + IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA, GFP_KERNEL); if (IS_ERR(m)) { ib_destroy_ah(ah); return PTR_ERR(m); } + m->ah = ah; *msg = m; return 0; } -static void free_msg(struct ib_mad_send_buf *msg) +void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc) { - ib_destroy_ah(msg->send_wr.wr.ud.ah); - ib_free_send_mad(msg); + struct ib_rmpp_mad *rmpp_mad = mad_send_wc->send_buf->mad; + + if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_ACK) + ib_destroy_ah(mad_send_wc->send_buf->ah); + ib_free_send_mad(mad_send_wc->send_buf); } static void nack_recv(struct ib_mad_agent_private *agent, @@ -191,14 +189,13 @@ static void nack_recv(struct ib_mad_agent_private *agent, { struct ib_mad_send_buf *msg; struct ib_rmpp_mad *rmpp_mad; - struct ib_send_wr *bad_send_wr; int ret; ret = alloc_response_msg(&agent->agent, recv_wc, &msg); if (ret) return; - rmpp_mad = (struct ib_rmpp_mad *) msg->mad; + rmpp_mad = msg->mad; memcpy(rmpp_mad, recv_wc->recv_buf.mad, data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class)); @@ -210,9 +207,11 @@ static void nack_recv(struct ib_mad_agent_private *agent, rmpp_mad->rmpp_hdr.seg_num = 0; rmpp_mad->rmpp_hdr.paylen_newwin = 0; - ret = ib_post_send_mad(&agent->agent, &msg->send_wr, &bad_send_wr); - if (ret) - free_msg(msg); + ret = ib_post_send_mad(msg, NULL); + if (ret) { + ib_destroy_ah(msg->ah); + ib_free_send_mad(msg); + } } static void recv_timeout_handler(void *data) @@ -585,7 +584,7 @@ static int send_next_seg(struct ib_mad_send_wr_private *mad_send_wr) int timeout; u32 paylen; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); rmpp_mad->rmpp_hdr.seg_num = cpu_to_be32(mad_send_wr->seg_num); @@ -612,7 +611,7 @@ static int send_next_seg(struct ib_mad_send_wr_private *mad_send_wr) } /* 2 seconds for an ACK until we can find the packet lifetime */ - timeout = mad_send_wr->send_wr.wr.ud.timeout_ms; + timeout = mad_send_wr->send_buf.timeout_ms; if (!timeout || timeout > 2000) mad_send_wr->timeout = msecs_to_jiffies(2000); mad_send_wr->seg_num++; @@ -640,7 +639,7 @@ static void abort_send(struct ib_mad_agent_private *agent, __be64 tid, wc.status = IB_WC_REM_ABORT_ERR; wc.vendor_err = rmpp_status; - wc.wr_id = mad_send_wr->wr_id; + wc.send_buf = &mad_send_wr->send_buf; ib_mad_complete_send_wr(mad_send_wr, &wc); return; out: @@ -694,12 +693,12 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, if (seg_num > mad_send_wr->last_ack) { mad_send_wr->last_ack = seg_num; - mad_send_wr->retries = mad_send_wr->send_wr.wr.ud.retries; + mad_send_wr->retries = mad_send_wr->send_buf.retries; } mad_send_wr->newwin = newwin; if (mad_send_wr->last_ack == mad_send_wr->total_seg) { /* If no response is expected, the ACK completes the send */ - if (!mad_send_wr->send_wr.wr.ud.timeout_ms) { + if (!mad_send_wr->send_buf.timeout_ms) { struct ib_mad_send_wc wc; ib_mark_mad_done(mad_send_wr); @@ -707,13 +706,13 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, wc.status = IB_WC_SUCCESS; wc.vendor_err = 0; - wc.wr_id = mad_send_wr->wr_id; + wc.send_buf = &mad_send_wr->send_buf; ib_mad_complete_send_wr(mad_send_wr, &wc); return; } if (mad_send_wr->refcount == 1) - ib_reset_mad_timeout(mad_send_wr, mad_send_wr-> - send_wr.wr.ud.timeout_ms); + ib_reset_mad_timeout(mad_send_wr, + mad_send_wr->send_buf.timeout_ms); } else if (mad_send_wr->refcount == 1 && mad_send_wr->seg_num < mad_send_wr->newwin && mad_send_wr->seg_num <= mad_send_wr->total_seg) { @@ -842,7 +841,7 @@ int ib_send_rmpp_mad(struct ib_mad_send_wr_private *mad_send_wr) struct ib_rmpp_mad *rmpp_mad; int i, total_len, ret; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) return IB_RMPP_RESULT_UNHANDLED; @@ -863,7 +862,7 @@ int ib_send_rmpp_mad(struct ib_mad_send_wr_private *mad_send_wr) mad_send_wr->total_seg = (total_len - mad_send_wr->data_offset) / (sizeof(struct ib_rmpp_mad) - mad_send_wr->data_offset); - mad_send_wr->pad = total_len - offsetof(struct ib_rmpp_mad, data) - + mad_send_wr->pad = total_len - IB_MGMT_RMPP_HDR - be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin); /* We need to wait for the final ACK even if there isn't a response */ @@ -878,23 +877,15 @@ int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, struct ib_mad_send_wc *mad_send_wc) { struct ib_rmpp_mad *rmpp_mad; - struct ib_mad_send_buf *msg; int ret; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */ - if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) { - msg = (struct ib_mad_send_buf *) (unsigned long) - mad_send_wc->wr_id; - if (rmpp_mad->rmpp_hdr.rmpp_type == IB_MGMT_RMPP_TYPE_ACK) - ib_free_send_mad(msg); - else - free_msg(msg); + if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) return IB_RMPP_RESULT_INTERNAL; /* ACK, STOP, or ABORT */ - } if (mad_send_wc->status != IB_WC_SUCCESS || mad_send_wr->status != IB_WC_SUCCESS) @@ -905,7 +896,7 @@ int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, if (mad_send_wr->last_ack == mad_send_wr->total_seg) { mad_send_wr->timeout = - msecs_to_jiffies(mad_send_wr->send_wr.wr.ud.timeout_ms); + msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms); return IB_RMPP_RESULT_PROCESSED; /* Send done */ } @@ -926,7 +917,7 @@ int ib_retry_rmpp(struct ib_mad_send_wr_private *mad_send_wr) struct ib_rmpp_mad *rmpp_mad; int ret; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */ diff --git a/drivers/infiniband/core/mad_rmpp.h b/drivers/infiniband/core/mad_rmpp.h index c4924dfb8e75..f0616fd22494 100644 --- a/drivers/infiniband/core/mad_rmpp.h +++ b/drivers/infiniband/core/mad_rmpp.h @@ -51,6 +51,8 @@ ib_process_rmpp_recv_wc(struct ib_mad_agent_private *agent, int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, struct ib_mad_send_wc *mad_send_wc); +void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc); + void ib_cancel_rmpp_recvs(struct ib_mad_agent_private *agent); int ib_retry_rmpp(struct ib_mad_send_wr_private *mad_send_wr); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 0e5ef97f7637..89ce9dc210d4 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -73,11 +73,10 @@ struct ib_sa_device { struct ib_sa_query { void (*callback)(struct ib_sa_query *, int, struct ib_sa_mad *); void (*release)(struct ib_sa_query *); - struct ib_sa_port *port; - struct ib_sa_mad *mad; - struct ib_sa_sm_ah *sm_ah; - DECLARE_PCI_UNMAP_ADDR(mapping) - int id; + struct ib_sa_port *port; + struct ib_mad_send_buf *mad_buf; + struct ib_sa_sm_ah *sm_ah; + int id; }; struct ib_sa_service_query { @@ -426,6 +425,7 @@ void ib_sa_cancel_query(int id, struct ib_sa_query *query) { unsigned long flags; struct ib_mad_agent *agent; + struct ib_mad_send_buf *mad_buf; spin_lock_irqsave(&idr_lock, flags); if (idr_find(&query_idr, id) != query) { @@ -433,9 +433,10 @@ void ib_sa_cancel_query(int id, struct ib_sa_query *query) return; } agent = query->port->agent; + mad_buf = query->mad_buf; spin_unlock_irqrestore(&idr_lock, flags); - ib_cancel_mad(agent, id); + ib_cancel_mad(agent, mad_buf); } EXPORT_SYMBOL(ib_sa_cancel_query); @@ -457,71 +458,46 @@ static void init_mad(struct ib_sa_mad *mad, struct ib_mad_agent *agent) static int send_mad(struct ib_sa_query *query, int timeout_ms) { - struct ib_sa_port *port = query->port; unsigned long flags; - int ret; - struct ib_sge gather_list; - struct ib_send_wr *bad_wr, wr = { - .opcode = IB_WR_SEND, - .sg_list = &gather_list, - .num_sge = 1, - .send_flags = IB_SEND_SIGNALED, - .wr = { - .ud = { - .mad_hdr = &query->mad->mad_hdr, - .remote_qpn = 1, - .remote_qkey = IB_QP1_QKEY, - .timeout_ms = timeout_ms, - } - } - }; + int ret, id; retry: if (!idr_pre_get(&query_idr, GFP_ATOMIC)) return -ENOMEM; spin_lock_irqsave(&idr_lock, flags); - ret = idr_get_new(&query_idr, query, &query->id); + ret = idr_get_new(&query_idr, query, &id); spin_unlock_irqrestore(&idr_lock, flags); if (ret == -EAGAIN) goto retry; if (ret) return ret; - wr.wr_id = query->id; + query->mad_buf->timeout_ms = timeout_ms; + query->mad_buf->context[0] = query; + query->id = id; - spin_lock_irqsave(&port->ah_lock, flags); - kref_get(&port->sm_ah->ref); - query->sm_ah = port->sm_ah; - wr.wr.ud.ah = port->sm_ah->ah; - spin_unlock_irqrestore(&port->ah_lock, flags); + spin_lock_irqsave(&query->port->ah_lock, flags); + kref_get(&query->port->sm_ah->ref); + query->sm_ah = query->port->sm_ah; + spin_unlock_irqrestore(&query->port->ah_lock, flags); - gather_list.addr = dma_map_single(port->agent->device->dma_device, - query->mad, - sizeof (struct ib_sa_mad), - DMA_TO_DEVICE); - gather_list.length = sizeof (struct ib_sa_mad); - gather_list.lkey = port->agent->mr->lkey; - pci_unmap_addr_set(query, mapping, gather_list.addr); + query->mad_buf->ah = query->sm_ah->ah; - ret = ib_post_send_mad(port->agent, &wr, &bad_wr); + ret = ib_post_send_mad(query->mad_buf, NULL); if (ret) { - dma_unmap_single(port->agent->device->dma_device, - pci_unmap_addr(query, mapping), - sizeof (struct ib_sa_mad), - DMA_TO_DEVICE); - kref_put(&query->sm_ah->ref, free_sm_ah); spin_lock_irqsave(&idr_lock, flags); - idr_remove(&query_idr, query->id); + idr_remove(&query_idr, id); spin_unlock_irqrestore(&idr_lock, flags); + + kref_put(&query->sm_ah->ref, free_sm_ah); } /* * It's not safe to dereference query any more, because the * send may already have completed and freed the query in - * another context. So use wr.wr_id, which has a copy of the - * query's id. + * another context. */ - return ret ? ret : wr.wr_id; + return ret ? ret : id; } static void ib_sa_path_rec_callback(struct ib_sa_query *sa_query, @@ -543,7 +519,6 @@ static void ib_sa_path_rec_callback(struct ib_sa_query *sa_query, static void ib_sa_path_rec_release(struct ib_sa_query *sa_query) { - kfree(sa_query->mad); kfree(container_of(sa_query, struct ib_sa_path_query, sa_query)); } @@ -585,6 +560,7 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); struct ib_sa_port *port; struct ib_mad_agent *agent; + struct ib_sa_mad *mad; int ret; if (!sa_dev) @@ -596,36 +572,44 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; - query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask); - if (!query->sa_query.mad) { - kfree(query); - return -ENOMEM; + + query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0, + 0, IB_MGMT_SA_HDR, + IB_MGMT_SA_DATA, gfp_mask); + if (!query->sa_query.mad_buf) { + ret = -ENOMEM; + goto err1; } query->callback = callback; query->context = context; - init_mad(query->sa_query.mad, agent); + mad = query->sa_query.mad_buf->mad; + init_mad(mad, agent); - query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL; - query->sa_query.release = ib_sa_path_rec_release; - query->sa_query.port = port; - query->sa_query.mad->mad_hdr.method = IB_MGMT_METHOD_GET; - query->sa_query.mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC); - query->sa_query.mad->sa_hdr.comp_mask = comp_mask; + query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL; + query->sa_query.release = ib_sa_path_rec_release; + query->sa_query.port = port; + mad->mad_hdr.method = IB_MGMT_METHOD_GET; + mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC); + mad->sa_hdr.comp_mask = comp_mask; - ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), - rec, query->sa_query.mad->data); + ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), rec, mad->data); *sa_query = &query->sa_query; ret = send_mad(&query->sa_query, timeout_ms); - if (ret < 0) { - *sa_query = NULL; - kfree(query->sa_query.mad); - kfree(query); - } + if (ret < 0) + goto err2; + + return ret; + +err2: + *sa_query = NULL; + ib_free_send_mad(query->sa_query.mad_buf); +err1: + kfree(query); return ret; } EXPORT_SYMBOL(ib_sa_path_rec_get); @@ -649,7 +633,6 @@ static void ib_sa_service_rec_callback(struct ib_sa_query *sa_query, static void ib_sa_service_rec_release(struct ib_sa_query *sa_query) { - kfree(sa_query->mad); kfree(container_of(sa_query, struct ib_sa_service_query, sa_query)); } @@ -693,6 +676,7 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); struct ib_sa_port *port; struct ib_mad_agent *agent; + struct ib_sa_mad *mad; int ret; if (!sa_dev) @@ -709,37 +693,45 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; - query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask); - if (!query->sa_query.mad) { - kfree(query); - return -ENOMEM; + + query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0, + 0, IB_MGMT_SA_HDR, + IB_MGMT_SA_DATA, gfp_mask); + if (!query->sa_query.mad_buf) { + ret = -ENOMEM; + goto err1; } query->callback = callback; query->context = context; - init_mad(query->sa_query.mad, agent); + mad = query->sa_query.mad_buf->mad; + init_mad(mad, agent); - query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL; - query->sa_query.release = ib_sa_service_rec_release; - query->sa_query.port = port; - query->sa_query.mad->mad_hdr.method = method; - query->sa_query.mad->mad_hdr.attr_id = - cpu_to_be16(IB_SA_ATTR_SERVICE_REC); - query->sa_query.mad->sa_hdr.comp_mask = comp_mask; + query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL; + query->sa_query.release = ib_sa_service_rec_release; + query->sa_query.port = port; + mad->mad_hdr.method = method; + mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_SERVICE_REC); + mad->sa_hdr.comp_mask = comp_mask; ib_pack(service_rec_table, ARRAY_SIZE(service_rec_table), - rec, query->sa_query.mad->data); + rec, mad->data); *sa_query = &query->sa_query; ret = send_mad(&query->sa_query, timeout_ms); - if (ret < 0) { - *sa_query = NULL; - kfree(query->sa_query.mad); - kfree(query); - } + if (ret < 0) + goto err2; + + return ret; +err2: + *sa_query = NULL; + ib_free_send_mad(query->sa_query.mad_buf); + +err1: + kfree(query); return ret; } EXPORT_SYMBOL(ib_sa_service_rec_query); @@ -763,7 +755,6 @@ static void ib_sa_mcmember_rec_callback(struct ib_sa_query *sa_query, static void ib_sa_mcmember_rec_release(struct ib_sa_query *sa_query) { - kfree(sa_query->mad); kfree(container_of(sa_query, struct ib_sa_mcmember_query, sa_query)); } @@ -782,6 +773,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); struct ib_sa_port *port; struct ib_mad_agent *agent; + struct ib_sa_mad *mad; int ret; if (!sa_dev) @@ -793,53 +785,55 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; - query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask); - if (!query->sa_query.mad) { - kfree(query); - return -ENOMEM; + + query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0, + 0, IB_MGMT_SA_HDR, + IB_MGMT_SA_DATA, gfp_mask); + if (!query->sa_query.mad_buf) { + ret = -ENOMEM; + goto err1; } query->callback = callback; query->context = context; - init_mad(query->sa_query.mad, agent); + mad = query->sa_query.mad_buf->mad; + init_mad(mad, agent); - query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL; - query->sa_query.release = ib_sa_mcmember_rec_release; - query->sa_query.port = port; - query->sa_query.mad->mad_hdr.method = method; - query->sa_query.mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC); - query->sa_query.mad->sa_hdr.comp_mask = comp_mask; + query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL; + query->sa_query.release = ib_sa_mcmember_rec_release; + query->sa_query.port = port; + mad->mad_hdr.method = method; + mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC); + mad->sa_hdr.comp_mask = comp_mask; ib_pack(mcmember_rec_table, ARRAY_SIZE(mcmember_rec_table), - rec, query->sa_query.mad->data); + rec, mad->data); *sa_query = &query->sa_query; ret = send_mad(&query->sa_query, timeout_ms); - if (ret < 0) { - *sa_query = NULL; - kfree(query->sa_query.mad); - kfree(query); - } + if (ret < 0) + goto err2; return ret; + +err2: + *sa_query = NULL; + ib_free_send_mad(query->sa_query.mad_buf); + +err1: + kfree(query); + return ret; } EXPORT_SYMBOL(ib_sa_mcmember_rec_query); static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *mad_send_wc) { - struct ib_sa_query *query; + struct ib_sa_query *query = mad_send_wc->send_buf->context[0]; unsigned long flags; - spin_lock_irqsave(&idr_lock, flags); - query = idr_find(&query_idr, mad_send_wc->wr_id); - spin_unlock_irqrestore(&idr_lock, flags); - - if (!query) - return; - if (query->callback) switch (mad_send_wc->status) { case IB_WC_SUCCESS: @@ -856,30 +850,25 @@ static void send_handler(struct ib_mad_agent *agent, break; } - dma_unmap_single(agent->device->dma_device, - pci_unmap_addr(query, mapping), - sizeof (struct ib_sa_mad), - DMA_TO_DEVICE); - kref_put(&query->sm_ah->ref, free_sm_ah); - - query->release(query); - spin_lock_irqsave(&idr_lock, flags); - idr_remove(&query_idr, mad_send_wc->wr_id); + idr_remove(&query_idr, query->id); spin_unlock_irqrestore(&idr_lock, flags); + + ib_free_send_mad(mad_send_wc->send_buf); + kref_put(&query->sm_ah->ref, free_sm_ah); + query->release(query); } static void recv_handler(struct ib_mad_agent *mad_agent, struct ib_mad_recv_wc *mad_recv_wc) { struct ib_sa_query *query; - unsigned long flags; + struct ib_mad_send_buf *mad_buf; - spin_lock_irqsave(&idr_lock, flags); - query = idr_find(&query_idr, mad_recv_wc->wc->wr_id); - spin_unlock_irqrestore(&idr_lock, flags); + mad_buf = (void *) (unsigned long) mad_recv_wc->wc->wr_id; + query = mad_buf->context[0]; - if (query && query->callback) { + if (query->callback) { if (mad_recv_wc->wc->status == IB_WC_SUCCESS) query->callback(query, mad_recv_wc->recv_buf.mad->mad_hdr.status ? diff --git a/drivers/infiniband/core/smi.h b/drivers/infiniband/core/smi.h index db25503a0736..2b3c40198f81 100644 --- a/drivers/infiniband/core/smi.h +++ b/drivers/infiniband/core/smi.h @@ -39,6 +39,8 @@ #ifndef __SMI_H_ #define __SMI_H_ +#include + int smi_handle_dr_smp_recv(struct ib_smp *smp, u8 node_type, int port_num, diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index fd200c064a2e..fc5519a3de99 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -96,7 +96,6 @@ struct ib_umad_file { }; struct ib_umad_packet { - struct ib_ah *ah; struct ib_mad_send_buf *msg; struct list_head list; int length; @@ -139,10 +138,10 @@ static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *send_wc) { struct ib_umad_file *file = agent->context; - struct ib_umad_packet *timeout, *packet = - (void *) (unsigned long) send_wc->wr_id; + struct ib_umad_packet *timeout; + struct ib_umad_packet *packet = send_wc->send_buf->context[0]; - ib_destroy_ah(packet->msg->send_wr.wr.ud.ah); + ib_destroy_ah(packet->msg->ah); ib_free_send_mad(packet->msg); if (send_wc->status == IB_WC_RESP_TIMEOUT_ERR) { @@ -268,11 +267,11 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, struct ib_umad_packet *packet; struct ib_mad_agent *agent; struct ib_ah_attr ah_attr; - struct ib_send_wr *bad_wr; + struct ib_ah *ah; struct ib_rmpp_mad *rmpp_mad; u8 method; __be64 *tid; - int ret, length, hdr_len, data_len, rmpp_hdr_size; + int ret, length, hdr_len, rmpp_hdr_size; int rmpp_active = 0; if (count < sizeof (struct ib_user_mad)) @@ -321,9 +320,9 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, ah_attr.grh.traffic_class = packet->mad.hdr.traffic_class; } - packet->ah = ib_create_ah(agent->qp->pd, &ah_attr); - if (IS_ERR(packet->ah)) { - ret = PTR_ERR(packet->ah); + ah = ib_create_ah(agent->qp->pd, &ah_attr); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); goto err_up; } @@ -337,12 +336,10 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, /* Validate that the management class can support RMPP */ if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) { - hdr_len = offsetof(struct ib_sa_mad, data); - data_len = length - hdr_len; + hdr_len = IB_MGMT_SA_HDR; } else if ((rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) && (rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) { - hdr_len = offsetof(struct ib_vendor_mad, data); - data_len = length - hdr_len; + hdr_len = IB_MGMT_VENDOR_HDR; } else { ret = -EINVAL; goto err_ah; @@ -353,25 +350,23 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, ret = -EINVAL; goto err_ah; } - hdr_len = offsetof(struct ib_mad, data); - data_len = length - hdr_len; + hdr_len = IB_MGMT_MAD_HDR; } packet->msg = ib_create_send_mad(agent, be32_to_cpu(packet->mad.hdr.qpn), - 0, packet->ah, rmpp_active, - hdr_len, data_len, + 0, rmpp_active, + hdr_len, length - hdr_len, GFP_KERNEL); if (IS_ERR(packet->msg)) { ret = PTR_ERR(packet->msg); goto err_ah; } - packet->msg->send_wr.wr.ud.timeout_ms = packet->mad.hdr.timeout_ms; - packet->msg->send_wr.wr.ud.retries = packet->mad.hdr.retries; - - /* Override send WR WRID initialized in ib_create_send_mad */ - packet->msg->send_wr.wr_id = (unsigned long) packet; + packet->msg->ah = ah; + packet->msg->timeout_ms = packet->mad.hdr.timeout_ms; + packet->msg->retries = packet->mad.hdr.retries; + packet->msg->context[0] = packet; if (!rmpp_active) { /* Copy message from user into send buffer */ @@ -403,17 +398,17 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, * transaction ID matches the agent being used to send the * MAD. */ - method = packet->msg->mad->mad_hdr.method; + method = ((struct ib_mad_hdr *) packet->msg)->method; if (!(method & IB_MGMT_METHOD_RESP) && method != IB_MGMT_METHOD_TRAP_REPRESS && method != IB_MGMT_METHOD_SEND) { - tid = &packet->msg->mad->mad_hdr.tid; + tid = &((struct ib_mad_hdr *) packet->msg)->tid; *tid = cpu_to_be64(((u64) agent->hi_tid) << 32 | (be64_to_cpup(tid) & 0xffffffff)); } - ret = ib_post_send_mad(agent, &packet->msg->send_wr, &bad_wr); + ret = ib_post_send_mad(packet->msg, NULL); if (ret) goto err_msg; @@ -425,7 +420,7 @@ err_msg: ib_free_send_mad(packet->msg); err_ah: - ib_destroy_ah(packet->ah); + ib_destroy_ah(ah); err_up: up_read(&file->agent_mutex); diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 9804174f7f3c..8561b297a19b 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -46,11 +46,6 @@ enum { MTHCA_VENDOR_CLASS2 = 0xa }; -struct mthca_trap_mad { - struct ib_mad *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) -}; - static void update_sm_ah(struct mthca_dev *dev, u8 port_num, u16 lid, u8 sl) { @@ -116,49 +111,14 @@ static void forward_trap(struct mthca_dev *dev, struct ib_mad *mad) { int qpn = mad->mad_hdr.mgmt_class != IB_MGMT_CLASS_SUBN_LID_ROUTED; - struct mthca_trap_mad *tmad; - struct ib_sge gather_list; - struct ib_send_wr *bad_wr, wr = { - .opcode = IB_WR_SEND, - .sg_list = &gather_list, - .num_sge = 1, - .send_flags = IB_SEND_SIGNALED, - .wr = { - .ud = { - .remote_qpn = qpn, - .remote_qkey = qpn ? IB_QP1_QKEY : 0, - .timeout_ms = 0 - } - } - }; + struct ib_mad_send_buf *send_buf; struct ib_mad_agent *agent = dev->send_agent[port_num - 1][qpn]; int ret; unsigned long flags; if (agent) { - tmad = kmalloc(sizeof *tmad, GFP_KERNEL); - if (!tmad) - return; - - tmad->mad = kmalloc(sizeof *tmad->mad, GFP_KERNEL); - if (!tmad->mad) { - kfree(tmad); - return; - } - - memcpy(tmad->mad, mad, sizeof *mad); - - wr.wr.ud.mad_hdr = &tmad->mad->mad_hdr; - wr.wr_id = (unsigned long) tmad; - - gather_list.addr = dma_map_single(agent->device->dma_device, - tmad->mad, - sizeof *tmad->mad, - DMA_TO_DEVICE); - gather_list.length = sizeof *tmad->mad; - gather_list.lkey = to_mpd(agent->qp->pd)->ntmr.ibmr.lkey; - pci_unmap_addr_set(tmad, mapping, gather_list.addr); - + send_buf = ib_create_send_mad(agent, qpn, 0, 0, IB_MGMT_MAD_HDR, + IB_MGMT_MAD_DATA, GFP_ATOMIC); /* * We rely here on the fact that MLX QPs don't use the * address handle after the send is posted (this is @@ -166,21 +126,15 @@ static void forward_trap(struct mthca_dev *dev, * it's OK for our devices). */ spin_lock_irqsave(&dev->sm_lock, flags); - wr.wr.ud.ah = dev->sm_ah[port_num - 1]; - if (wr.wr.ud.ah) - ret = ib_post_send_mad(agent, &wr, &bad_wr); + memcpy(send_buf->mad, mad, sizeof *mad); + if ((send_buf->ah = dev->sm_ah[port_num - 1])) + ret = ib_post_send_mad(send_buf, NULL); else ret = -EINVAL; spin_unlock_irqrestore(&dev->sm_lock, flags); - if (ret) { - dma_unmap_single(agent->device->dma_device, - pci_unmap_addr(tmad, mapping), - sizeof *tmad->mad, - DMA_TO_DEVICE); - kfree(tmad->mad); - kfree(tmad); - } + if (ret) + ib_free_send_mad(send_buf); } } @@ -267,15 +221,7 @@ int mthca_process_mad(struct ib_device *ibdev, static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *mad_send_wc) { - struct mthca_trap_mad *tmad = - (void *) (unsigned long) mad_send_wc->wr_id; - - dma_unmap_single(agent->device->dma_device, - pci_unmap_addr(tmad, mapping), - sizeof *tmad->mad, - DMA_TO_DEVICE); - kfree(tmad->mad); - kfree(tmad); + ib_free_send_mad(mad_send_wc->send_buf); } int mthca_create_agents(struct mthca_dev *dev) diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h index 4172e6841e3d..2c133506742b 100644 --- a/include/rdma/ib_mad.h +++ b/include/rdma/ib_mad.h @@ -109,10 +109,14 @@ #define IB_QP_SET_QKEY 0x80000000 enum { + IB_MGMT_MAD_HDR = 24, IB_MGMT_MAD_DATA = 232, + IB_MGMT_RMPP_HDR = 36, IB_MGMT_RMPP_DATA = 220, + IB_MGMT_VENDOR_HDR = 40, IB_MGMT_VENDOR_DATA = 216, - IB_MGMT_SA_DATA = 200 + IB_MGMT_SA_HDR = 56, + IB_MGMT_SA_DATA = 200, }; struct ib_mad_hdr { @@ -203,26 +207,25 @@ struct ib_class_port_info /** * ib_mad_send_buf - MAD data buffer and work request for sends. - * @mad: References an allocated MAD data buffer. The size of the data - * buffer is specified in the @send_wr.length field. - * @mapping: DMA mapping information. + * @next: A pointer used to chain together MADs for posting. + * @mad: References an allocated MAD data buffer. * @mad_agent: MAD agent that allocated the buffer. + * @ah: The address handle to use when sending the MAD. * @context: User-controlled context fields. - * @send_wr: An initialized work request structure used when sending the MAD. - * The wr_id field of the work request is initialized to reference this - * data structure. - * @sge: A scatter-gather list referenced by the work request. + * @timeout_ms: Time to wait for a response. + * @retries: Number of times to retry a request for a response. * * Users are responsible for initializing the MAD buffer itself, with the * exception of specifying the payload length field in any RMPP MAD. */ struct ib_mad_send_buf { - struct ib_mad *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) + struct ib_mad_send_buf *next; + void *mad; struct ib_mad_agent *mad_agent; + struct ib_ah *ah; void *context[2]; - struct ib_send_wr send_wr; - struct ib_sge sge; + int timeout_ms; + int retries; }; /** @@ -287,7 +290,7 @@ typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent, * or @mad_send_wc. */ typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, + struct ib_mad_send_buf *send_buf, struct ib_mad_send_wc *mad_send_wc); /** @@ -334,13 +337,13 @@ struct ib_mad_agent { /** * ib_mad_send_wc - MAD send completion information. - * @wr_id: Work request identifier associated with the send MAD request. + * @send_buf: Send MAD data buffer associated with the send MAD request. * @status: Completion status. * @vendor_err: Optional vendor error information returned with a failed * request. */ struct ib_mad_send_wc { - u64 wr_id; + struct ib_mad_send_buf *send_buf; enum ib_wc_status status; u32 vendor_err; }; @@ -366,7 +369,7 @@ struct ib_mad_recv_buf { * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers. * @mad_len: The length of the received MAD, without duplicated headers. * - * For received response, the wr_id field of the wc is set to the wr_id + * For received response, the wr_id contains a pointer to the ib_mad_send_buf * for the corresponding send request. */ struct ib_mad_recv_wc { @@ -463,9 +466,9 @@ int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent); /** * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated * with the registered client. - * @mad_agent: Specifies the associated registration to post the send to. - * @send_wr: Specifies the information needed to send the MAD(s). - * @bad_send_wr: Specifies the MAD on which an error was encountered. + * @send_buf: Specifies the information needed to send the MAD(s). + * @bad_send_buf: Specifies the MAD on which an error was encountered. This + * parameter is optional if only a single MAD is posted. * * Sent MADs are not guaranteed to complete in the order that they were posted. * @@ -479,9 +482,8 @@ int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent); * defined data being transferred. The paylen_newwin field should be * specified in network-byte order. */ -int ib_post_send_mad(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr); +int ib_post_send_mad(struct ib_mad_send_buf *send_buf, + struct ib_mad_send_buf **bad_send_buf); /** * ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer. @@ -507,23 +509,25 @@ void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc); /** * ib_cancel_mad - Cancels an outstanding send MAD operation. * @mad_agent: Specifies the registration associated with sent MAD. - * @wr_id: Indicates the work request identifier of the MAD to cancel. + * @send_buf: Indicates the MAD to cancel. * * MADs will be returned to the user through the corresponding * ib_mad_send_handler. */ -void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id); +void ib_cancel_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf); /** * ib_modify_mad - Modifies an outstanding send MAD operation. * @mad_agent: Specifies the registration associated with sent MAD. - * @wr_id: Indicates the work request identifier of the MAD to modify. + * @send_buf: Indicates the MAD to modify. * @timeout_ms: New timeout value for sent MAD. * * This call will reset the timeout value for a sent MAD to the specified * value. */ -int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms); +int ib_modify_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf, u32 timeout_ms); /** * ib_redirect_mad_qp - Registers a QP for MAD services. @@ -572,7 +576,6 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, * @remote_qpn: Specifies the QPN of the receiving node. * @pkey_index: Specifies which PKey the MAD will be sent using. This field * is valid only if the remote_qpn is QP 1. - * @ah: References the address handle used to transfer to the remote node. * @rmpp_active: Indicates if the send will enable RMPP. * @hdr_len: Indicates the size of the data header of the MAD. This length * should include the common MAD header, RMPP header, plus any class @@ -582,11 +585,10 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, * additional padding that may be necessary. * @gfp_mask: GFP mask used for the memory allocation. * - * This is a helper routine that may be used to allocate a MAD. Users are - * not required to allocate outbound MADs using this call. The returned - * MAD send buffer will reference a data buffer usable for sending a MAD, along + * This routine allocates a MAD for sending. The returned MAD send buffer + * will reference a data buffer usable for sending a MAD, along * with an initialized work request structure. Users may modify the returned - * MAD data buffer or work request before posting the send. + * MAD data buffer before posting the send. * * The returned data buffer will be cleared. Users are responsible for * initializing the common MAD and any class specific headers. If @rmpp_active @@ -594,7 +596,7 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, */ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, - struct ib_ah *ah, int rmpp_active, + int rmpp_active, int hdr_len, int data_len, gfp_t gfp_mask); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index a5a963cb5676..f72d46d54e0a 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -595,11 +595,8 @@ struct ib_send_wr { } atomic; struct { struct ib_ah *ah; - struct ib_mad_hdr *mad_hdr; u32 remote_qpn; u32 remote_qkey; - int timeout_ms; /* valid for MADs only */ - int retries; /* valid for MADs only */ u16 pkey_index; /* valid for GSI only */ u8 port_num; /* valid for DR SMPs on switch only */ } ud; -- cgit v1.2.3 From 547e3090738b04be650770b64265835dbb6ddf92 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 25 Oct 2005 10:57:32 -0700 Subject: [IB] mthca: correct modify QP attribute masks for UC The UC transport does not support RDMA reads or atomic operations, so we shouldn't require or even allow the consumer to set attributes relating to these operations for UC QPs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 2ee0a2b0fd4b..62ff091505da 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -338,8 +338,7 @@ static const struct { [UC] = (IB_QP_AV | IB_QP_PATH_MTU | IB_QP_DEST_QPN | - IB_QP_RQ_PSN | - IB_QP_MAX_DEST_RD_ATOMIC), + IB_QP_RQ_PSN), [RC] = (IB_QP_AV | IB_QP_PATH_MTU | IB_QP_DEST_QPN | @@ -368,8 +367,7 @@ static const struct { .trans = MTHCA_TRANS_RTR2RTS, .req_param = { [UD] = IB_QP_SQ_PSN, - [UC] = (IB_QP_SQ_PSN | - IB_QP_MAX_QP_RD_ATOMIC), + [UC] = IB_QP_SQ_PSN, [RC] = (IB_QP_TIMEOUT | IB_QP_RETRY_CNT | IB_QP_RNR_RETRY | @@ -446,8 +444,6 @@ static const struct { [UD] = (IB_QP_PKEY_INDEX | IB_QP_QKEY), [UC] = (IB_QP_AV | - IB_QP_MAX_QP_RD_ATOMIC | - IB_QP_MAX_DEST_RD_ATOMIC | IB_QP_CUR_STATE | IB_QP_ALT_PATH | IB_QP_ACCESS_FLAGS | @@ -478,7 +474,7 @@ static const struct { .opt_param = { [UD] = (IB_QP_CUR_STATE | IB_QP_QKEY), - [UC] = (IB_QP_CUR_STATE), + [UC] = IB_QP_CUR_STATE, [RC] = (IB_QP_CUR_STATE | IB_QP_MIN_RNR_TIMER), [MLX] = (IB_QP_CUR_STATE | -- cgit v1.2.3 From 444d1d9bb5b724f03344c9317bc01d54a9b39073 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 25 Oct 2005 11:00:56 -0700 Subject: [PATCH] qlogic lockup fix If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call qla2x00_free_device() to clean up. But because ha->dpc_pid hasn't been set yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started yet. It does wait_for_completion() against an uninitialised completion struct and the kernel hangs up. Fix it by initialising ha->dpc_pid a bit earlier. Cc: Andrew Vasquez Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/qla2xxx/qla_os.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8982978c42fd..7aec93f9d423 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1325,6 +1325,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->brd_info = brd_info; sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no); + ha->dpc_pid = -1; + /* Configure PCI I/O space */ ret = qla2x00_iospace_config(ha); if (ret) @@ -1448,7 +1450,6 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) */ spin_lock_init(&ha->mbx_reg_lock); - ha->dpc_pid = -1; init_completion(&ha->dpc_inited); init_completion(&ha->dpc_exited); -- cgit v1.2.3 From 7cc656efb560cda66b5ed48444cad7556ea4fe99 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 25 Oct 2005 15:13:54 -0700 Subject: [IB] simplify mad_rmpp.c:alloc_response_msg() Change alloc_response_msg() in mad_rmpp.c to return the struct it allocates directly (or an error code a la ERR_PTR), rather than returning a status and passing the struct back in a pointer param. This simplifies the code and gets rid of warnings like drivers/infiniband/core/mad_rmpp.c: In function nack_recv: drivers/infiniband/core/mad_rmpp.c:192: warning: msg may be used uninitialized in this function with newer versions of gcc. Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad_rmpp.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index ba112cd5f93c..3249e1d8c07b 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -151,28 +151,27 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv, ib_free_send_mad(msg); } -static int alloc_response_msg(struct ib_mad_agent *agent, - struct ib_mad_recv_wc *recv_wc, - struct ib_mad_send_buf **msg) +static struct ib_mad_send_buf *alloc_response_msg(struct ib_mad_agent *agent, + struct ib_mad_recv_wc *recv_wc) { - struct ib_mad_send_buf *m; + struct ib_mad_send_buf *msg; struct ib_ah *ah; ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc, recv_wc->recv_buf.grh, agent->port_num); if (IS_ERR(ah)) - return PTR_ERR(ah); + return (void *) ah; - m = ib_create_send_mad(agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, 1, - IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA, GFP_KERNEL); - if (IS_ERR(m)) { + msg = ib_create_send_mad(agent, recv_wc->wc->src_qp, + recv_wc->wc->pkey_index, 1, + IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA, + GFP_KERNEL); + if (IS_ERR(msg)) ib_destroy_ah(ah); - return PTR_ERR(m); - } - m->ah = ah; - *msg = m; - return 0; + else + msg->ah = ah; + + return msg; } void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc) @@ -191,8 +190,8 @@ static void nack_recv(struct ib_mad_agent_private *agent, struct ib_rmpp_mad *rmpp_mad; int ret; - ret = alloc_response_msg(&agent->agent, recv_wc, &msg); - if (ret) + msg = alloc_response_msg(&agent->agent, recv_wc); + if (IS_ERR(msg)) return; rmpp_mad = msg->mad; -- cgit v1.2.3 From 6693e74a16ef563960764bd963f1048392135c3c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 25 Oct 2005 20:40:09 -0700 Subject: PCI: be more verbose about resource quirks When reserving an PCI quirk, note that in the kernel bootup messages. Also, parse the strange PIIX4 device resources - they should get their own PCI resource quirks, but for now just print out what it finds to verify that the code does the right thing. Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 101 ++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 88 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a6a630a950d0..7992bc8cc6a4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -241,7 +241,8 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M ); -static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr) +static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, + unsigned size, int nr, const char *name) { region &= ~(size-1); if (region) { @@ -259,6 +260,7 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsi pcibios_bus_to_resource(dev, res, &bus_region); pci_claim_resource(dev, nr); + printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name); } } @@ -291,25 +293,98 @@ static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) u16 region; pci_read_config_word(dev, 0xE0, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); pci_read_config_word(dev, 0xE2, ®ion); - quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1); + quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi ); +static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) +{ + u32 devres; + u32 mask, size, base; + + pci_read_config_dword(dev, port, &devres); + if ((devres & enable) != enable) + return; + mask = (devres >> 16) & 15; + base = devres & 0xffff; + size = 16; + for (;;) { + unsigned bit = size >> 1; + if ((bit & mask) == bit) + break; + size = bit; + } + /* + * For now we only print it out. Eventually we'll want to + * reserve it (at least if it's in the 0x1000+ range), but + * let's get enough confirmation reports first. + */ + base &= -size; + printk("%s PIO at %04x-%04x\n", name, base, base + size - 1); +} + +static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) +{ + u32 devres; + u32 mask, size, base; + + pci_read_config_dword(dev, port, &devres); + if ((devres & enable) != enable) + return; + base = devres & 0xffff0000; + mask = (devres & 0x3f) << 16; + size = 128 << 16; + for (;;) { + unsigned bit = size >> 1; + if ((bit & mask) == bit) + break; + size = bit; + } + /* + * For now we only print it out. Eventually we'll want to + * reserve it, but let's get enough confirmation reports first. + */ + base &= -size; + printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1); +} + /* * PIIX4 ACPI: Two IO regions pointed to by longwords at * 0x40 (64 bytes of ACPI registers) * 0x90 (32 bytes of SMB registers) + * and a few strange programmable PIIX4 device resources. */ static void __devinit quirk_piix4_acpi(struct pci_dev *dev) { - u32 region; + u32 region, res_a; pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); pci_read_config_dword(dev, 0x90, ®ion); - quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1); + quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); + + /* Device resource A has enables for some of the other ones */ + pci_read_config_dword(dev, 0x5c, &res_a); + + piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); + piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); + + /* Device resource D is just bitfields for static resources */ + + /* Device 12 enabled? */ + if (res_a & (1 << 29)) { + piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); + piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); + } + /* Device 13 enabled? */ + if (res_a & (1 << 30)) { + piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); + piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); + } + piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); + piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi ); @@ -323,10 +398,10 @@ static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) u32 region; pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO"); pci_read_config_dword(dev, 0x58, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi ); @@ -352,7 +427,7 @@ static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) if (rev & 0x10) { pci_read_config_dword(dev, 0x48, ®ion); region &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI"); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi ); @@ -372,11 +447,11 @@ static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) pci_read_config_word(dev, 0x70, &hm); hm &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1); + quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c868 HW-mon"); pci_read_config_dword(dev, 0x90, &smb); smb &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2); + quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c868 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi ); @@ -391,11 +466,11 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) pci_read_config_word(dev, 0x88, &pm); pm &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); pci_read_config_word(dev, 0xd0, &smb); smb &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1); + quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); -- cgit v1.2.3 From ac9c18974f7d08cdedfb1e9599faa8c851c7cef9 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 26 Oct 2005 00:51:24 -0400 Subject: [netdrvr forcedeth] scatter gather and segmentation offload support also: - eliminate use of pointless get_nvpriv() wrapper, and use netdev_priv() directly. - use NETDEV_TX_xxx return codes --- drivers/net/forcedeth.c | 249 +++++++++++++++++++++++++++++++----------------- 1 file changed, 162 insertions(+), 87 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index e5f480203675..22aec6ed80f5 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -96,6 +96,7 @@ * 0.42: 06 Aug 2005: Fix lack of link speed initialization * in the second (and later) nv_open call * 0.43: 10 Aug 2005: Add support for tx checksum. + * 0.44: 20 Aug 2005: Add support for scatter gather and segmentation. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -107,7 +108,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.43" +#define FORCEDETH_VERSION "0.44" #define DRV_NAME "forcedeth" #include @@ -340,6 +341,8 @@ typedef union _ring_type { /* error and valid are the same for both */ #define NV_TX2_ERROR (1<<30) #define NV_TX2_VALID (1<<31) +#define NV_TX2_TSO (1<<28) +#define NV_TX2_TSO_SHIFT 14 #define NV_TX2_CHECKSUM_L3 (1<<27) #define NV_TX2_CHECKSUM_L4 (1<<26) @@ -542,7 +545,7 @@ static inline struct fe_priv *get_nvpriv(struct net_device *dev) static inline u8 __iomem *get_hwbase(struct net_device *dev) { - return get_nvpriv(dev)->base; + return ((struct fe_priv *)netdev_priv(dev))->base; } static inline void pci_push(u8 __iomem *base) @@ -631,7 +634,7 @@ static int mii_rw(struct net_device *dev, int addr, int miireg, int value) static int phy_reset(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u32 miicontrol; unsigned int tries = 0; @@ -734,7 +737,7 @@ static int phy_init(struct net_device *dev) static void nv_start_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); dprintk(KERN_DEBUG "%s: nv_start_rx\n", dev->name); @@ -790,7 +793,7 @@ static void nv_stop_tx(struct net_device *dev) static void nv_txrx_reset(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); dprintk(KERN_DEBUG "%s: nv_txrx_reset\n", dev->name); @@ -809,7 +812,7 @@ static void nv_txrx_reset(struct net_device *dev) */ static struct net_device_stats *nv_get_stats(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); /* It seems that the nic always generates interrupts and doesn't * accumulate errors internally. Thus the current values in np->stats @@ -825,7 +828,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev) */ static int nv_alloc_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); unsigned int refill_rx = np->refill_rx; int nr; @@ -869,7 +872,7 @@ static int nv_alloc_rx(struct net_device *dev) static void nv_do_rx_refill(unsigned long data) { struct net_device *dev = (struct net_device *) data; - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); disable_irq(dev->irq); if (nv_alloc_rx(dev)) { @@ -883,7 +886,7 @@ static void nv_do_rx_refill(unsigned long data) static void nv_init_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int i; np->cur_rx = RX_RING; @@ -897,15 +900,17 @@ static void nv_init_rx(struct net_device *dev) static void nv_init_tx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int i; np->next_tx = np->nic_tx = 0; - for (i = 0; i < TX_RING; i++) + for (i = 0; i < TX_RING; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) np->tx_ring.orig[i].FlagLen = 0; else np->tx_ring.ex[i].FlagLen = 0; + np->tx_skbuff[i] = NULL; + } } static int nv_init_ring(struct net_device *dev) @@ -915,21 +920,44 @@ static int nv_init_ring(struct net_device *dev) return nv_alloc_rx(dev); } +static void nv_release_txskb(struct net_device *dev, unsigned int skbnr) +{ + struct fe_priv *np = netdev_priv(dev); + struct sk_buff *skb = np->tx_skbuff[skbnr]; + unsigned int j, entry, fragments; + + dprintk(KERN_INFO "%s: nv_release_txskb for skbnr %d, skb %p\n", + dev->name, skbnr, np->tx_skbuff[skbnr]); + + entry = skbnr; + if ((fragments = skb_shinfo(skb)->nr_frags) != 0) { + for (j = fragments; j >= 1; j--) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[j-1]; + pci_unmap_page(np->pci_dev, np->tx_dma[entry], + frag->size, + PCI_DMA_TODEVICE); + entry = (entry - 1) % TX_RING; + } + } + pci_unmap_single(np->pci_dev, np->tx_dma[entry], + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + np->tx_skbuff[skbnr] = NULL; +} + static void nv_drain_tx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); - int i; + struct fe_priv *np = netdev_priv(dev); + unsigned int i; + for (i = 0; i < TX_RING; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) np->tx_ring.orig[i].FlagLen = 0; else np->tx_ring.ex[i].FlagLen = 0; if (np->tx_skbuff[i]) { - pci_unmap_single(np->pci_dev, np->tx_dma[i], - np->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(np->tx_skbuff[i]); - np->tx_skbuff[i] = NULL; + nv_release_txskb(dev, i); np->stats.tx_dropped++; } } @@ -937,7 +965,7 @@ static void nv_drain_tx(struct net_device *dev) static void nv_drain_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int i; for (i = 0; i < RX_RING; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) @@ -967,29 +995,69 @@ static void drain_ring(struct net_device *dev) */ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); - int nr = np->next_tx % TX_RING; - u32 tx_checksum = (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0); + struct fe_priv *np = netdev_priv(dev); + u32 tx_flags_extra = (np->desc_ver == DESC_VER_1 ? NV_TX_LASTPACKET : NV_TX2_LASTPACKET); + unsigned int fragments = skb_shinfo(skb)->nr_frags; + unsigned int nr = (np->next_tx + fragments) % TX_RING; + unsigned int i; + + spin_lock_irq(&np->lock); + + if ((np->next_tx - np->nic_tx + fragments) > TX_LIMIT_STOP) { + spin_unlock_irq(&np->lock); + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } np->tx_skbuff[nr] = skb; - np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len, - PCI_DMA_TODEVICE); + + if (fragments) { + dprintk(KERN_DEBUG "%s: nv_start_xmit: buffer contains %d fragments\n", dev->name, fragments); + /* setup descriptors in reverse order */ + for (i = fragments; i >= 1; i--) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i-1]; + np->tx_dma[nr] = pci_map_page(np->pci_dev, frag->page, frag->page_offset, frag->size, + PCI_DMA_TODEVICE); - if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { + np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (frag->size-1) | np->tx_flags | tx_flags_extra); + } else { + np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; + np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (frag->size-1) | np->tx_flags | tx_flags_extra); + } + + nr = (nr - 1) % TX_RING; + + if (np->desc_ver == DESC_VER_1) + tx_flags_extra &= ~NV_TX_LASTPACKET; + else + tx_flags_extra &= ~NV_TX2_LASTPACKET; + } + } + +#ifdef NETIF_F_TSO + if (skb_shinfo(skb)->tso_size) + tx_flags_extra |= NV_TX2_TSO | (skb_shinfo(skb)->tso_size << NV_TX2_TSO_SHIFT); + else +#endif + tx_flags_extra |= (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0); + + np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len-skb->data_len, + PCI_DMA_TODEVICE); + + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); - else { + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-skb->data_len-1) | np->tx_flags | tx_flags_extra); + } else { np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; - } + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-skb->data_len-1) | np->tx_flags | tx_flags_extra); + } - spin_lock_irq(&np->lock); - wmb(); - if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); - else - np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); - dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission\n", - dev->name, np->next_tx); + dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission. tx_flags_extra: %x\n", + dev->name, np->next_tx, tx_flags_extra); { int j; for (j=0; j<64; j++) { @@ -1000,15 +1068,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) dprintk("\n"); } - np->next_tx++; + np->next_tx += 1 + fragments; dev->trans_start = jiffies; - if (np->next_tx - np->nic_tx >= TX_LIMIT_STOP) - netif_stop_queue(dev); spin_unlock_irq(&np->lock); writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(get_hwbase(dev)); - return 0; + return NETDEV_TX_OK; } /* @@ -1018,9 +1084,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) */ static void nv_tx_done(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u32 Flags; - int i; + unsigned int i; + struct sk_buff *skb; while (np->nic_tx != np->next_tx) { i = np->nic_tx % TX_RING; @@ -1035,35 +1102,38 @@ static void nv_tx_done(struct net_device *dev) if (Flags & NV_TX_VALID) break; if (np->desc_ver == DESC_VER_1) { - if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION| - NV_TX_UNDERFLOW|NV_TX_ERROR)) { - if (Flags & NV_TX_UNDERFLOW) - np->stats.tx_fifo_errors++; - if (Flags & NV_TX_CARRIERLOST) - np->stats.tx_carrier_errors++; - np->stats.tx_errors++; - } else { - np->stats.tx_packets++; - np->stats.tx_bytes += np->tx_skbuff[i]->len; + if (Flags & NV_TX_LASTPACKET) { + skb = np->tx_skbuff[i]; + if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION| + NV_TX_UNDERFLOW|NV_TX_ERROR)) { + if (Flags & NV_TX_UNDERFLOW) + np->stats.tx_fifo_errors++; + if (Flags & NV_TX_CARRIERLOST) + np->stats.tx_carrier_errors++; + np->stats.tx_errors++; + } else { + np->stats.tx_packets++; + np->stats.tx_bytes += skb->len; + } + nv_release_txskb(dev, i); } } else { - if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION| - NV_TX2_UNDERFLOW|NV_TX2_ERROR)) { - if (Flags & NV_TX2_UNDERFLOW) - np->stats.tx_fifo_errors++; - if (Flags & NV_TX2_CARRIERLOST) - np->stats.tx_carrier_errors++; - np->stats.tx_errors++; - } else { - np->stats.tx_packets++; - np->stats.tx_bytes += np->tx_skbuff[i]->len; + if (Flags & NV_TX2_LASTPACKET) { + skb = np->tx_skbuff[i]; + if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION| + NV_TX2_UNDERFLOW|NV_TX2_ERROR)) { + if (Flags & NV_TX2_UNDERFLOW) + np->stats.tx_fifo_errors++; + if (Flags & NV_TX2_CARRIERLOST) + np->stats.tx_carrier_errors++; + np->stats.tx_errors++; + } else { + np->stats.tx_packets++; + np->stats.tx_bytes += skb->len; + } + nv_release_txskb(dev, i); } } - pci_unmap_single(np->pci_dev, np->tx_dma[i], - np->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(np->tx_skbuff[i]); - np->tx_skbuff[i] = NULL; np->nic_tx++; } if (np->next_tx - np->nic_tx < TX_LIMIT_START) @@ -1076,7 +1146,7 @@ static void nv_tx_done(struct net_device *dev) */ static void nv_tx_timeout(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name, @@ -1209,7 +1279,7 @@ static int nv_getlen(struct net_device *dev, void *packet, int datalen) static void nv_rx_process(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u32 Flags; for (;;) { @@ -1364,7 +1434,7 @@ static void set_bufsize(struct net_device *dev) */ static int nv_change_mtu(struct net_device *dev, int new_mtu) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int old_mtu; if (new_mtu < 64 || new_mtu > np->pkt_limit) @@ -1449,7 +1519,7 @@ static void nv_copy_mac_to_hw(struct net_device *dev) */ static int nv_set_mac_address(struct net_device *dev, void *addr) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); struct sockaddr *macaddr = (struct sockaddr*)addr; if(!is_valid_ether_addr(macaddr->sa_data)) @@ -1484,7 +1554,7 @@ static int nv_set_mac_address(struct net_device *dev, void *addr) */ static void nv_set_multicast(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 addr[2]; u32 mask[2]; @@ -1544,7 +1614,7 @@ static void nv_set_multicast(struct net_device *dev) static int nv_update_linkspeed(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); int adv, lpa; int newls = np->linkspeed; @@ -1714,7 +1784,7 @@ static void nv_link_irq(struct net_device *dev) static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) data; - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 events; int i; @@ -1786,7 +1856,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) static void nv_do_nic_poll(unsigned long data) { struct net_device *dev = (struct net_device *) data; - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); disable_irq(dev->irq); @@ -1810,7 +1880,7 @@ static void nv_poll_controller(struct net_device *dev) static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); strcpy(info->driver, "forcedeth"); strcpy(info->version, FORCEDETH_VERSION); strcpy(info->bus_info, pci_name(np->pci_dev)); @@ -1818,7 +1888,7 @@ static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) static void nv_get_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); wolinfo->supported = WAKE_MAGIC; spin_lock_irq(&np->lock); @@ -1829,7 +1899,7 @@ static void nv_get_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo) static int nv_set_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); spin_lock_irq(&np->lock); @@ -2030,7 +2100,7 @@ static int nv_get_regs_len(struct net_device *dev) static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 *rbuf = buf; int i; @@ -2044,7 +2114,7 @@ static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void static int nv_nway_reset(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int ret; spin_lock_irq(&np->lock); @@ -2079,7 +2149,7 @@ static struct ethtool_ops ops = { static int nv_open(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); int ret, oom, i; @@ -2215,7 +2285,7 @@ out_drain: static int nv_close(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base; spin_lock_irq(&np->lock); @@ -2271,7 +2341,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (!dev) goto out; - np = get_nvpriv(dev); + np = netdev_priv(dev); np->pci_dev = pci_dev; spin_lock_init(&np->lock); SET_MODULE_OWNER(dev); @@ -2323,6 +2393,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) { printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n", pci_name(pci_dev)); + } else { + dev->features |= NETIF_F_HIGHDMA; } np->txrxctl_bits = NVREG_TXRXCTL_DESC_3; } else if (id->driver_data & DEV_HAS_LARGEDESC) { @@ -2341,8 +2413,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (id->driver_data & DEV_HAS_CHECKSUM) { np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; - dev->features |= NETIF_F_HW_CSUM; - } + dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG; +#ifdef NETIF_F_TSO + dev->features |= NETIF_F_TSO; +#endif + } err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); @@ -2422,9 +2497,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->wolenabled = 0; if (np->desc_ver == DESC_VER_1) { - np->tx_flags = NV_TX_LASTPACKET|NV_TX_VALID; + np->tx_flags = NV_TX_VALID; } else { - np->tx_flags = NV_TX2_LASTPACKET|NV_TX2_VALID; + np->tx_flags = NV_TX2_VALID; } np->irqmask = NVREG_IRQMASK_WANTED; if (id->driver_data & DEV_NEED_TIMERIRQ) @@ -2513,7 +2588,7 @@ out: static void __devexit nv_remove(struct pci_dev *pci_dev) { struct net_device *dev = pci_get_drvdata(pci_dev); - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); unregister_netdev(dev); -- cgit v1.2.3 From 91190758d410a5d33c6051ba9ca95baa430256bb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 26 Oct 2005 12:17:46 -0400 Subject: [libata] ata_timing fix --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index dcd3b5553cc8..f53d7b8ac33f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1616,7 +1616,7 @@ static const struct ata_timing* ata_timing_find_mode(unsigned short speed) const struct ata_timing *t; for (t = ata_timing; t->mode != speed; t++) - if (t->mode != 0xFF) + if (t->mode == 0xFF) return NULL; return t; } -- cgit v1.2.3 From 8712e553562bbbed9b3a99370f08e9bc25908a76 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 26 Oct 2005 01:58:58 -0700 Subject: [PATCH] md: make sure mdthreads will always respond to kthread_stop There are still a couple of cases where md threads (the resync/recovery thread) is not interruptible since the change to use kthreads. All places there it tests "signal_pending", it should also test kthread_should_stop, as with this patch. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index e9476075aa13..2a8a5696bf8a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3568,7 +3568,8 @@ static void md_do_sync(mddev_t *mddev) mddev->curr_resync = 2; try_again: - if (signal_pending(current)) { + if (signal_pending(current) || + kthread_should_stop()) { flush_signals(current); set_bit(MD_RECOVERY_INTR, &mddev->recovery); goto skip; @@ -3590,8 +3591,9 @@ static void md_do_sync(mddev_t *mddev) */ continue; prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE); - if (!signal_pending(current) - && mddev2->curr_resync >= mddev->curr_resync) { + if (!signal_pending(current) && + !kthread_should_stop() && + mddev2->curr_resync >= mddev->curr_resync) { printk(KERN_INFO "md: delaying resync of %s" " until %s has finished resync (they" " share one or more physical units)\n", @@ -3697,7 +3699,7 @@ static void md_do_sync(mddev_t *mddev) } - if (signal_pending(current)) { + if (signal_pending(current) || kthread_should_stop()) { /* * got a signal, exit. */ -- cgit v1.2.3 From b0917bd912d3708c50e1df1b5e1648d0547108a3 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Wed, 26 Oct 2005 11:05:25 +0100 Subject: [PATCH] fix radeon_cp_init_ring_buffer() I've seen similar failure on alpha. Obviously, someone forgot to convert sg->handle stuff for PCI gart case. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/char/drm/radeon_cp.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 6d9080a3ca7e..12ef13ff04ca 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1133,10 +1133,10 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, ring_start = (dev_priv->cp_ring->offset - dev->agp->base + dev_priv->gart_vm_start); - } else + } else #endif ring_start = (dev_priv->cp_ring->offset - - dev->sg->handle + - (unsigned long)dev->sg->virtual + dev_priv->gart_vm_start); RADEON_WRITE( RADEON_CP_RB_BASE, ring_start ); @@ -1164,7 +1164,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, drm_sg_mem_t *entry = dev->sg; unsigned long tmp_ofs, page_ofs; - tmp_ofs = dev_priv->ring_rptr->offset - dev->sg->handle; + tmp_ofs = dev_priv->ring_rptr->offset - + (unsigned long)dev->sg->virtual; page_ofs = tmp_ofs >> PAGE_SHIFT; RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR, @@ -1491,8 +1492,8 @@ static int radeon_do_init_cp( drm_device_t *dev, drm_radeon_init_t *init ) else #endif dev_priv->gart_buffers_offset = (dev->agp_buffer_map->offset - - dev->sg->handle - + dev_priv->gart_vm_start); + - (unsigned long)dev->sg->virtual + + dev_priv->gart_vm_start); DRM_DEBUG( "dev_priv->gart_size %d\n", dev_priv->gart_size ); -- cgit v1.2.3 From 3d155f8cd0d077938d271225d26ee52f8eb26082 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 27 Oct 2005 11:03:38 -0700 Subject: [IB] mthca: first pass at catastrophic error reporting Add some initial support for detecting and reporting catastrophic errors reported by Mellanox HCAs. We start a periodic timer which polls the catastrophic error reporting buffer in device memory. If an error is detected, we dump the contents of the buffer for port-mortem debugging, and report a fatal asynchronous error to higher levels. In the future we can try to recover from these errors by resetting the device, but this will require some work in higher-level code as well. Let's get this in now, so that we at least get catastrophic errors reported in logs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/Makefile | 3 +- drivers/infiniband/hw/mthca/mthca_catas.c | 153 +++++++++++++++++++++++++++ drivers/infiniband/hw/mthca/mthca_cmd.c | 5 + drivers/infiniband/hw/mthca/mthca_dev.h | 13 +++ drivers/infiniband/hw/mthca/mthca_provider.c | 3 + 5 files changed, 176 insertions(+), 1 deletion(-) create mode 100644 drivers/infiniband/hw/mthca/mthca_catas.c (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/Makefile b/drivers/infiniband/hw/mthca/Makefile index c44f7bae5424..47ec5a7cba0b 100644 --- a/drivers/infiniband/hw/mthca/Makefile +++ b/drivers/infiniband/hw/mthca/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_INFINIBAND_MTHCA) += ib_mthca.o ib_mthca-y := mthca_main.o mthca_cmd.o mthca_profile.o mthca_reset.o \ mthca_allocator.o mthca_eq.o mthca_pd.o mthca_cq.o \ mthca_mr.o mthca_qp.o mthca_av.o mthca_mcg.o mthca_mad.o \ - mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o + mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o \ + mthca_catas.o diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c new file mode 100644 index 000000000000..7ac52af43b99 --- /dev/null +++ b/drivers/infiniband/hw/mthca/mthca_catas.c @@ -0,0 +1,153 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id$ + */ + +#include "mthca_dev.h" + +enum { + MTHCA_CATAS_POLL_INTERVAL = 5 * HZ, + + MTHCA_CATAS_TYPE_INTERNAL = 0, + MTHCA_CATAS_TYPE_UPLINK = 3, + MTHCA_CATAS_TYPE_DDR = 4, + MTHCA_CATAS_TYPE_PARITY = 5, +}; + +static DEFINE_SPINLOCK(catas_lock); + +static void handle_catas(struct mthca_dev *dev) +{ + struct ib_event event; + const char *type; + int i; + + event.device = &dev->ib_dev; + event.event = IB_EVENT_DEVICE_FATAL; + event.element.port_num = 0; + + ib_dispatch_event(&event); + + switch (swab32(readl(dev->catas_err.map)) >> 24) { + case MTHCA_CATAS_TYPE_INTERNAL: + type = "internal error"; + break; + case MTHCA_CATAS_TYPE_UPLINK: + type = "uplink bus error"; + break; + case MTHCA_CATAS_TYPE_DDR: + type = "DDR data error"; + break; + case MTHCA_CATAS_TYPE_PARITY: + type = "internal parity error"; + break; + default: + type = "unknown error"; + break; + } + + mthca_err(dev, "Catastrophic error detected: %s\n", type); + for (i = 0; i < dev->catas_err.size; ++i) + mthca_err(dev, " buf[%02x]: %08x\n", + i, swab32(readl(dev->catas_err.map + i))); +} + +static void poll_catas(unsigned long dev_ptr) +{ + struct mthca_dev *dev = (struct mthca_dev *) dev_ptr; + unsigned long flags; + int i; + + for (i = 0; i < dev->catas_err.size; ++i) + if (readl(dev->catas_err.map + i)) { + handle_catas(dev); + return; + } + + spin_lock_irqsave(&catas_lock, flags); + if (dev->catas_err.stop) + mod_timer(&dev->catas_err.timer, + jiffies + MTHCA_CATAS_POLL_INTERVAL); + spin_unlock_irqrestore(&catas_lock, flags); + + return; +} + +void mthca_start_catas_poll(struct mthca_dev *dev) +{ + unsigned long addr; + + init_timer(&dev->catas_err.timer); + dev->catas_err.stop = 0; + dev->catas_err.map = NULL; + + addr = pci_resource_start(dev->pdev, 0) + + ((pci_resource_len(dev->pdev, 0) - 1) & + dev->catas_err.addr); + + if (!request_mem_region(addr, dev->catas_err.size * 4, + DRV_NAME)) { + mthca_warn(dev, "couldn't request catastrophic error region " + "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4); + return; + } + + dev->catas_err.map = ioremap(addr, dev->catas_err.size * 4); + if (!dev->catas_err.map) { + mthca_warn(dev, "couldn't map catastrophic error region " + "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4); + release_mem_region(addr, dev->catas_err.size * 4); + return; + } + + dev->catas_err.timer.data = (unsigned long) dev; + dev->catas_err.timer.function = poll_catas; + dev->catas_err.timer.expires = jiffies + MTHCA_CATAS_POLL_INTERVAL; + add_timer(&dev->catas_err.timer); +} + +void mthca_stop_catas_poll(struct mthca_dev *dev) +{ + spin_lock_irq(&catas_lock); + dev->catas_err.stop = 1; + spin_unlock_irq(&catas_lock); + + del_timer_sync(&dev->catas_err.timer); + + if (dev->catas_err.map) { + iounmap(dev->catas_err.map); + release_mem_region(pci_resource_start(dev->pdev, 0) + + ((pci_resource_len(dev->pdev, 0) - 1) & + dev->catas_err.addr), + dev->catas_err.size * 4); + } +} diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 1bd7dc8f778c..9220473dbfbd 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2005 Cisco Systems. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -706,9 +707,13 @@ int mthca_QUERY_FW(struct mthca_dev *dev, u8 *status) MTHCA_GET(lg, outbox, QUERY_FW_MAX_CMD_OFFSET); dev->cmd.max_cmds = 1 << lg; + MTHCA_GET(dev->catas_err.addr, outbox, QUERY_FW_ERR_START_OFFSET); + MTHCA_GET(dev->catas_err.size, outbox, QUERY_FW_ERR_SIZE_OFFSET); mthca_dbg(dev, "FW version %012llx, max commands %d\n", (unsigned long long) dev->fw_ver, dev->cmd.max_cmds); + mthca_dbg(dev, "Catastrophic error buffer at 0x%llx, size 0x%x\n", + (unsigned long long) dev->catas_err.addr, dev->catas_err.size); if (mthca_is_memfree(dev)) { MTHCA_GET(dev->fw.arbel.fw_pages, outbox, QUERY_FW_SIZE_OFFSET); diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index f106bac0f925..7e68bd4a3780 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -258,6 +258,14 @@ struct mthca_mcg_table { struct mthca_icm_table *table; }; +struct mthca_catas_err { + u64 addr; + u32 __iomem *map; + unsigned long stop; + u32 size; + struct timer_list timer; +}; + struct mthca_dev { struct ib_device ib_dev; struct pci_dev *pdev; @@ -318,6 +326,8 @@ struct mthca_dev { struct mthca_av_table av_table; struct mthca_mcg_table mcg_table; + struct mthca_catas_err catas_err; + struct mthca_uar driver_uar; struct mthca_db_table *db_tab; struct mthca_pd driver_pd; @@ -405,6 +415,9 @@ void mthca_cleanup_mcg_table(struct mthca_dev *dev); int mthca_register_device(struct mthca_dev *dev); void mthca_unregister_device(struct mthca_dev *dev); +void mthca_start_catas_poll(struct mthca_dev *dev); +void mthca_stop_catas_poll(struct mthca_dev *dev); + int mthca_uar_alloc(struct mthca_dev *dev, struct mthca_uar *uar); void mthca_uar_free(struct mthca_dev *dev, struct mthca_uar *uar); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 9e911a1ea415..1b9477edbd7b 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1175,10 +1175,13 @@ int mthca_register_device(struct mthca_dev *dev) } } + mthca_start_catas_poll(dev); + return 0; } void mthca_unregister_device(struct mthca_dev *dev) { + mthca_stop_catas_poll(dev); ib_unregister_device(&dev->ib_dev); } -- cgit v1.2.3 From 927321440976d0781a252eefe686ae6b0f236ae2 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 27 Oct 2005 16:16:25 -0700 Subject: [PATCH] cpufreq: SMP fix for conservative governor Don't try to access not-present CPUs. Conservative governor will always oops on SMP without this fix. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=4781 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cpufreq/cpufreq_conservative.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index e1df376e709e..2ed5c4363b53 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -315,9 +315,9 @@ static void dbs_check_cpu(int cpu) policy = this_dbs_info->cur_policy; if ( init_flag == 0 ) { - for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) { - dbs_info = &per_cpu(cpu_dbs_info, init_flag); - requested_freq[cpu] = dbs_info->cur_policy->cur; + for_each_online_cpu(j) { + dbs_info = &per_cpu(cpu_dbs_info, j); + requested_freq[j] = dbs_info->cur_policy->cur; } init_flag = 1; } -- cgit v1.2.3 From 089a1bedd84be16a4f49a319e7ccb4a128da5ce9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 27 Oct 2005 20:33:43 -0700 Subject: [IB] ib_umad: fix crash when freeing send buffers The conversion of user_mad.c to the new MAD send API was slightly off: in a few places, we used packet->msg instead of packet->msg->mad when referring to the actual data buffer, which ended up corrupting the underlying data structure and crashing when we free an invalid pointer. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index fc5519a3de99..a48166a8e04b 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -398,12 +398,12 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, * transaction ID matches the agent being used to send the * MAD. */ - method = ((struct ib_mad_hdr *) packet->msg)->method; + method = ((struct ib_mad_hdr *) packet->msg->mad)->method; if (!(method & IB_MGMT_METHOD_RESP) && method != IB_MGMT_METHOD_TRAP_REPRESS && method != IB_MGMT_METHOD_SEND) { - tid = &((struct ib_mad_hdr *) packet->msg)->tid; + tid = &((struct ib_mad_hdr *) packet->msg->mad)->tid; *tid = cpu_to_be64(((u64) agent->hi_tid) << 32 | (be64_to_cpup(tid) & 0xffffffff)); } -- cgit v1.2.3 From cb0f0910f4b41772a6771bdb4fb2d419b27bcd77 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 27 Oct 2005 20:48:11 -0700 Subject: [IB] ib_umad: various cleanups Simplify user_mad.c code in a few places, and convert from kmalloc() + memset() to kzalloc(). This also fixes a theoretical race window by not accessing packet->length after posting the send buffer (the send could complete and packet could be freed before we get to the return statement at the end of ib_umad_write()). Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 73 +++++++++++--------------------------- 1 file changed, 21 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index a48166a8e04b..17ec0a19dbc0 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -99,7 +99,6 @@ struct ib_umad_packet { struct ib_mad_send_buf *msg; struct list_head list; int length; - DECLARE_PCI_UNMAP_ADDR(mapping) struct ib_user_mad mad; }; @@ -145,15 +144,12 @@ static void send_handler(struct ib_mad_agent *agent, ib_free_send_mad(packet->msg); if (send_wc->status == IB_WC_RESP_TIMEOUT_ERR) { - timeout = kmalloc(sizeof *timeout + sizeof (struct ib_mad_hdr), - GFP_KERNEL); + timeout = kzalloc(sizeof *timeout + IB_MGMT_MAD_HDR, GFP_KERNEL); if (!timeout) goto out; - memset(timeout, 0, sizeof *timeout + sizeof (struct ib_mad_hdr)); - - timeout->length = sizeof (struct ib_mad_hdr); - timeout->mad.hdr.id = packet->mad.hdr.id; + timeout->length = IB_MGMT_MAD_HDR; + timeout->mad.hdr.id = packet->mad.hdr.id; timeout->mad.hdr.status = ETIMEDOUT; memcpy(timeout->mad.data, packet->mad.data, sizeof (struct ib_mad_hdr)); @@ -176,11 +172,10 @@ static void recv_handler(struct ib_mad_agent *agent, goto out; length = mad_recv_wc->mad_len; - packet = kmalloc(sizeof *packet + length, GFP_KERNEL); + packet = kzalloc(sizeof *packet + length, GFP_KERNEL); if (!packet) goto out; - memset(packet, 0, sizeof *packet + length); packet->length = length; ib_coalesce_recv_mad(mad_recv_wc, packet->mad.data); @@ -246,7 +241,7 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf, else ret = -ENOSPC; } else if (copy_to_user(buf, &packet->mad, - packet->length + sizeof (struct ib_user_mad))) + packet->length + sizeof (struct ib_user_mad))) ret = -EFAULT; else ret = packet->length + sizeof (struct ib_user_mad); @@ -271,22 +266,19 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, struct ib_rmpp_mad *rmpp_mad; u8 method; __be64 *tid; - int ret, length, hdr_len, rmpp_hdr_size; + int ret, length, hdr_len, copy_offset; int rmpp_active = 0; if (count < sizeof (struct ib_user_mad)) return -EINVAL; length = count - sizeof (struct ib_user_mad); - packet = kmalloc(sizeof *packet + sizeof(struct ib_mad_hdr) + - sizeof (struct ib_rmpp_hdr), GFP_KERNEL); + packet = kmalloc(sizeof *packet + IB_MGMT_RMPP_HDR, GFP_KERNEL); if (!packet) return -ENOMEM; if (copy_from_user(&packet->mad, buf, - sizeof (struct ib_user_mad) + - sizeof (struct ib_mad_hdr) + - sizeof (struct ib_rmpp_hdr))) { + sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)) { ret = -EFAULT; goto err; } @@ -297,8 +289,6 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, goto err; } - packet->length = length; - down_read(&file->agent_mutex); agent = file->agent[packet->mad.hdr.id]; @@ -345,12 +335,10 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, goto err_ah; } rmpp_active = 1; + copy_offset = IB_MGMT_RMPP_HDR; } else { - if (length > sizeof (struct ib_mad)) { - ret = -EINVAL; - goto err_ah; - } hdr_len = IB_MGMT_MAD_HDR; + copy_offset = IB_MGMT_MAD_HDR; } packet->msg = ib_create_send_mad(agent, @@ -368,28 +356,14 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, packet->msg->retries = packet->mad.hdr.retries; packet->msg->context[0] = packet; - if (!rmpp_active) { - /* Copy message from user into send buffer */ - if (copy_from_user(packet->msg->mad, - buf + sizeof (struct ib_user_mad), length)) { - ret = -EFAULT; - goto err_msg; - } - } else { - rmpp_hdr_size = sizeof (struct ib_mad_hdr) + - sizeof (struct ib_rmpp_hdr); - - /* Only copy MAD headers (RMPP header in place) */ - memcpy(packet->msg->mad, packet->mad.data, - sizeof (struct ib_mad_hdr)); - - /* Now, copy rest of message from user into send buffer */ - if (copy_from_user(((struct ib_rmpp_mad *) packet->msg->mad)->data, - buf + sizeof (struct ib_user_mad) + rmpp_hdr_size, - length - rmpp_hdr_size)) { - ret = -EFAULT; - goto err_msg; - } + /* Copy MAD headers (RMPP header in place) */ + memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR); + /* Now, copy rest of message from user into send buffer */ + if (copy_from_user(packet->msg->mad + copy_offset, + buf + sizeof (struct ib_user_mad) + copy_offset, + length - copy_offset)) { + ret = -EFAULT; + goto err_msg; } /* @@ -414,7 +388,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, up_read(&file->agent_mutex); - return sizeof (struct ib_user_mad_hdr) + packet->length; + return count; err_msg: ib_free_send_mad(packet->msg); @@ -564,12 +538,10 @@ static int ib_umad_open(struct inode *inode, struct file *filp) container_of(inode->i_cdev, struct ib_umad_port, dev); struct ib_umad_file *file; - file = kmalloc(sizeof *file, GFP_KERNEL); + file = kzalloc(sizeof *file, GFP_KERNEL); if (!file) return -ENOMEM; - memset(file, 0, sizeof *file); - spin_lock_init(&file->recv_lock); init_rwsem(&file->agent_mutex); INIT_LIST_HEAD(&file->recv_list); @@ -814,15 +786,12 @@ static void ib_umad_add_one(struct ib_device *device) e = device->phys_port_cnt; } - umad_dev = kmalloc(sizeof *umad_dev + + umad_dev = kzalloc(sizeof *umad_dev + (e - s + 1) * sizeof (struct ib_umad_port), GFP_KERNEL); if (!umad_dev) return; - memset(umad_dev, 0, sizeof *umad_dev + - (e - s + 1) * sizeof (struct ib_umad_port)); - kref_init(&umad_dev->ref); umad_dev->start_port = s; -- cgit v1.2.3 From 20e5c81fcff89535dced2ed71cf24c6c648ff40e Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Thu, 13 Oct 2005 21:48:42 +0200 Subject: [patch] remove gendisk->stamp_idle field struct gendisk has these two fields: stamp, stamp_idle. Update to stamp_idle is always in sync with stamp and they are always the same. Therefore, it does not add any value in having two fields tracking same timestamp. Suggest to remove it. Also, we should only update gendisk stats with non-zero value. Advantage is that we don't have to needlessly calculate memory address, and then add zero to the content. Signed-off-by: Ken Chen Signed-off-by: Jens Axboe --- drivers/block/ll_rw_blk.c | 11 +++++------ fs/partitions/check.c | 2 +- include/linux/genhd.h | 2 +- 3 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index baedac522945..c42071fd2e95 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -2433,13 +2433,12 @@ void disk_round_stats(struct gendisk *disk) { unsigned long now = jiffies; - __disk_stat_add(disk, time_in_queue, - disk->in_flight * (now - disk->stamp)); + if (disk->in_flight) { + __disk_stat_add(disk, time_in_queue, + disk->in_flight * (now - disk->stamp)); + __disk_stat_add(disk, io_ticks, (now - disk->stamp)); + } disk->stamp = now; - - if (disk->in_flight) - __disk_stat_add(disk, io_ticks, (now - disk->stamp_idle)); - disk->stamp_idle = now; } /* diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 77e178f13162..1e848648a322 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -430,7 +430,7 @@ void del_gendisk(struct gendisk *disk) disk->flags &= ~GENHD_FL_UP; unlink_gendisk(disk); disk_stat_set_all(disk, 0); - disk->stamp = disk->stamp_idle = 0; + disk->stamp = 0; devfs_remove_disk(disk); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 01796c41c951..142e1c1e0689 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -119,7 +119,7 @@ struct gendisk { int policy; atomic_t sync_io; /* RAID */ - unsigned long stamp, stamp_idle; + unsigned long stamp; int in_flight; #ifdef CONFIG_SMP struct disk_stats *dkstats; -- cgit v1.2.3 From b2982649ce38293b14684b26bcda20cfc54164e6 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Thu, 13 Oct 2005 21:49:29 +0200 Subject: Following the same idea, it occurs to me that we should only update disk stat when "now" is different from disk->stamp. Otherwise, we are again needlessly adding zero to the stats. Signed-off-by: Ken Chen Signed-off-by: Jens Axboe --- drivers/block/ll_rw_blk.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index c42071fd2e95..4e2b1b06b411 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -2433,6 +2433,9 @@ void disk_round_stats(struct gendisk *disk) { unsigned long now = jiffies; + if (now == disk->stamp) + return; + if (disk->in_flight) { __disk_stat_add(disk, time_in_queue, disk->in_flight * (now - disk->stamp)); -- cgit v1.2.3 From 2824bc9328467127083c1325f54b67d298c333b2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 10:56:41 +0200 Subject: [PATCH] fix try_module_get race in elevator_find This patch removes try_module_get race in elevator_find. try_module_get should always be called with the spinlock protecting what the module init/cleanup routines register/unregister to held. In the case of elevators, we should be holding elv_list to avoid it going away between spin_unlock_irq and try_module_get. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 98f0126a2deb..4144f30d82a9 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -97,7 +97,6 @@ static struct elevator_type *elevator_find(const char *name) struct elevator_type *e = NULL; struct list_head *entry; - spin_lock_irq(&elv_list_lock); list_for_each(entry, &elv_list) { struct elevator_type *__e; @@ -108,7 +107,6 @@ static struct elevator_type *elevator_find(const char *name) break; } } - spin_unlock_irq(&elv_list_lock); return e; } @@ -120,12 +118,15 @@ static void elevator_put(struct elevator_type *e) static struct elevator_type *elevator_get(const char *name) { - struct elevator_type *e = elevator_find(name); + struct elevator_type *e; - if (!e) - return NULL; - if (!try_module_get(e->elevator_owner)) - return NULL; + spin_lock_irq(&elv_list_lock); + + e = elevator_find(name); + if (e && !try_module_get(e->elevator_owner)) + e = NULL; + + spin_unlock_irq(&elv_list_lock); return e; } @@ -153,11 +154,15 @@ static char chosen_elevator[16]; static void elevator_setup_default(void) { + struct elevator_type *e; + /* * check if default is set and exists */ - if (chosen_elevator[0] && elevator_find(chosen_elevator)) + if (chosen_elevator[0] && (e = elevator_get(chosen_elevator))) { + elevator_put(e); return; + } #if defined(CONFIG_IOSCHED_AS) strcpy(chosen_elevator, "anticipatory"); @@ -555,10 +560,9 @@ void elv_unregister_queue(struct request_queue *q) int elv_register(struct elevator_type *e) { + spin_lock_irq(&elv_list_lock); if (elevator_find(e->elevator_name)) BUG(); - - spin_lock_irq(&elv_list_lock); list_add_tail(&e->list, &elv_list); spin_unlock_irq(&elv_list_lock); -- cgit v1.2.3 From 8922e16cf6269e668123acb1ae1fdc62b7a3a4fc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:23:44 +0200 Subject: [PATCH] 01/05 Implement generic dispatch queue Implements generic dispatch queue which can replace all dispatch queues implemented by each iosched. This reduces code duplication, eases enforcing semantics over dispatch queue, and simplifies specific ioscheds. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 242 ++++++++++++++++++++++++++++++++-------------- drivers/block/ll_rw_blk.c | 23 +++-- include/linux/blkdev.h | 17 ++-- include/linux/elevator.h | 16 ++- 4 files changed, 201 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 4144f30d82a9..a27555908d35 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -40,6 +40,11 @@ static DEFINE_SPINLOCK(elv_list_lock); static LIST_HEAD(elv_list); +static inline sector_t rq_last_sector(struct request *rq) +{ + return rq->sector + rq->nr_sectors; +} + /* * can we safely merge with this request? */ @@ -143,6 +148,9 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, INIT_LIST_HEAD(&q->queue_head); q->last_merge = NULL; q->elevator = eq; + q->last_sector = 0; + q->boundary_rq = NULL; + q->max_back_kb = 0; if (eq->ops->elevator_init_fn) ret = eq->ops->elevator_init_fn(q, eq); @@ -225,6 +233,48 @@ void elevator_exit(elevator_t *e) kfree(e); } +/* + * Insert rq into dispatch queue of q. Queue lock must be held on + * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be + * appended to the dispatch queue. To be used by specific elevators. + */ +void elv_dispatch_insert(request_queue_t *q, struct request *rq, int sort) +{ + sector_t boundary; + unsigned max_back; + struct list_head *entry; + + if (!sort) { + /* Specific elevator is performing sort. Step away. */ + q->last_sector = rq_last_sector(rq); + q->boundary_rq = rq; + list_add_tail(&rq->queuelist, &q->queue_head); + return; + } + + boundary = q->last_sector; + max_back = q->max_back_kb * 2; + boundary = boundary > max_back ? boundary - max_back : 0; + + list_for_each_prev(entry, &q->queue_head) { + struct request *pos = list_entry_rq(entry); + + if (pos->flags & (REQ_SOFTBARRIER|REQ_HARDBARRIER|REQ_STARTED)) + break; + if (rq->sector >= boundary) { + if (pos->sector < boundary) + continue; + } else { + if (pos->sector >= boundary) + break; + } + if (rq->sector >= pos->sector) + break; + } + + list_add(&rq->queuelist, entry); +} + int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) { elevator_t *e = q->elevator; @@ -255,13 +305,7 @@ void elv_merge_requests(request_queue_t *q, struct request *rq, e->ops->elevator_merge_req_fn(q, rq, next); } -/* - * For careful internal use by the block layer. Essentially the same as - * a requeue in that it tells the io scheduler that this request is not - * active in the driver or hardware anymore, but we don't want the request - * added back to the scheduler. Function is not exported. - */ -void elv_deactivate_request(request_queue_t *q, struct request *rq) +void elv_requeue_request(request_queue_t *q, struct request *rq) { elevator_t *e = q->elevator; @@ -269,19 +313,14 @@ void elv_deactivate_request(request_queue_t *q, struct request *rq) * it already went through dequeue, we need to decrement the * in_flight count again */ - if (blk_account_rq(rq)) + if (blk_account_rq(rq)) { q->in_flight--; + if (blk_sorted_rq(rq) && e->ops->elevator_deactivate_req_fn) + e->ops->elevator_deactivate_req_fn(q, rq); + } rq->flags &= ~REQ_STARTED; - if (e->ops->elevator_deactivate_req_fn) - e->ops->elevator_deactivate_req_fn(q, rq); -} - -void elv_requeue_request(request_queue_t *q, struct request *rq) -{ - elv_deactivate_request(q, rq); - /* * if this is the flush, requeue the original instead and drop the flush */ @@ -290,55 +329,89 @@ void elv_requeue_request(request_queue_t *q, struct request *rq) rq = rq->end_io_data; } - /* - * the request is prepped and may have some resources allocated. - * allowing unprepped requests to pass this one may cause resource - * deadlock. turn on softbarrier. - */ - rq->flags |= REQ_SOFTBARRIER; - - /* - * if iosched has an explicit requeue hook, then use that. otherwise - * just put the request at the front of the queue - */ - if (q->elevator->ops->elevator_requeue_req_fn) - q->elevator->ops->elevator_requeue_req_fn(q, rq); - else - __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); + __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); } void __elv_add_request(request_queue_t *q, struct request *rq, int where, int plug) { - /* - * barriers implicitly indicate back insertion - */ - if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) && - where == ELEVATOR_INSERT_SORT) - where = ELEVATOR_INSERT_BACK; + if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { + /* + * barriers implicitly indicate back insertion + */ + if (where == ELEVATOR_INSERT_SORT) + where = ELEVATOR_INSERT_BACK; + + /* + * this request is scheduling boundary, update last_sector + */ + if (blk_fs_request(rq)) { + q->last_sector = rq_last_sector(rq); + q->boundary_rq = rq; + } + } if (plug) blk_plug_device(q); rq->q = q; - if (!test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)) { - q->elevator->ops->elevator_add_req_fn(q, rq, where); - - if (blk_queue_plugged(q)) { - int nrq = q->rq.count[READ] + q->rq.count[WRITE] - - q->in_flight; - - if (nrq >= q->unplug_thresh) - __generic_unplug_device(q); - } - } else + if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) { /* * if drain is set, store the request "locally". when the drain * is finished, the requests will be handed ordered to the io * scheduler */ list_add_tail(&rq->queuelist, &q->drain_list); + return; + } + + switch (where) { + case ELEVATOR_INSERT_FRONT: + rq->flags |= REQ_SOFTBARRIER; + + list_add(&rq->queuelist, &q->queue_head); + break; + + case ELEVATOR_INSERT_BACK: + rq->flags |= REQ_SOFTBARRIER; + + while (q->elevator->ops->elevator_dispatch_fn(q, 1)) + ; + list_add_tail(&rq->queuelist, &q->queue_head); + /* + * We kick the queue here for the following reasons. + * - The elevator might have returned NULL previously + * to delay requests and returned them now. As the + * queue wasn't empty before this request, ll_rw_blk + * won't run the queue on return, resulting in hang. + * - Usually, back inserted requests won't be merged + * with anything. There's no point in delaying queue + * processing. + */ + blk_remove_plug(q); + q->request_fn(q); + break; + + case ELEVATOR_INSERT_SORT: + BUG_ON(!blk_fs_request(rq)); + rq->flags |= REQ_SORTED; + q->elevator->ops->elevator_add_req_fn(q, rq); + break; + + default: + printk(KERN_ERR "%s: bad insertion point %d\n", + __FUNCTION__, where); + BUG(); + } + + if (blk_queue_plugged(q)) { + int nrq = q->rq.count[READ] + q->rq.count[WRITE] + - q->in_flight; + + if (nrq >= q->unplug_thresh) + __generic_unplug_device(q); + } } void elv_add_request(request_queue_t *q, struct request *rq, int where, @@ -353,13 +426,19 @@ void elv_add_request(request_queue_t *q, struct request *rq, int where, static inline struct request *__elv_next_request(request_queue_t *q) { - struct request *rq = q->elevator->ops->elevator_next_req_fn(q); + struct request *rq; + + if (unlikely(list_empty(&q->queue_head) && + !q->elevator->ops->elevator_dispatch_fn(q, 0))) + return NULL; + + rq = list_entry_rq(q->queue_head.next); /* * if this is a barrier write and the device has to issue a * flush sequence to support it, check how far we are */ - if (rq && blk_fs_request(rq) && blk_barrier_rq(rq)) { + if (blk_fs_request(rq) && blk_barrier_rq(rq)) { BUG_ON(q->ordered == QUEUE_ORDERED_NONE); if (q->ordered == QUEUE_ORDERED_FLUSH && @@ -376,16 +455,34 @@ struct request *elv_next_request(request_queue_t *q) int ret; while ((rq = __elv_next_request(q)) != NULL) { - /* - * just mark as started even if we don't start it, a request - * that has been delayed should not be passed by new incoming - * requests - */ - rq->flags |= REQ_STARTED; + if (!(rq->flags & REQ_STARTED)) { + elevator_t *e = q->elevator; + + /* + * This is the first time the device driver + * sees this request (possibly after + * requeueing). Notify IO scheduler. + */ + if (blk_sorted_rq(rq) && + e->ops->elevator_activate_req_fn) + e->ops->elevator_activate_req_fn(q, rq); + + /* + * just mark as started even if we don't start + * it, a request that has been delayed should + * not be passed by new incoming requests + */ + rq->flags |= REQ_STARTED; + } if (rq == q->last_merge) q->last_merge = NULL; + if (!q->boundary_rq || q->boundary_rq == rq) { + q->last_sector = rq_last_sector(rq); + q->boundary_rq = NULL; + } + if ((rq->flags & REQ_DONTPREP) || !q->prep_rq_fn) break; @@ -396,9 +493,9 @@ struct request *elv_next_request(request_queue_t *q) /* * the request may have been (partially) prepped. * we need to keep this request in the front to - * avoid resource deadlock. turn on softbarrier. + * avoid resource deadlock. REQ_STARTED will + * prevent other fs requests from passing this one. */ - rq->flags |= REQ_SOFTBARRIER; rq = NULL; break; } else if (ret == BLKPREP_KILL) { @@ -421,16 +518,16 @@ struct request *elv_next_request(request_queue_t *q) return rq; } -void elv_remove_request(request_queue_t *q, struct request *rq) +void elv_dequeue_request(request_queue_t *q, struct request *rq) { - elevator_t *e = q->elevator; + BUG_ON(list_empty(&rq->queuelist)); + + list_del_init(&rq->queuelist); /* * the time frame between a request being removed from the lists * and to it is freed is accounted as io that is in progress at - * the driver side. note that we only account requests that the - * driver has seen (REQ_STARTED set), to avoid false accounting - * for request-request merges + * the driver side. */ if (blk_account_rq(rq)) q->in_flight++; @@ -444,19 +541,19 @@ void elv_remove_request(request_queue_t *q, struct request *rq) */ if (rq == q->last_merge) q->last_merge = NULL; - - if (e->ops->elevator_remove_req_fn) - e->ops->elevator_remove_req_fn(q, rq); } int elv_queue_empty(request_queue_t *q) { elevator_t *e = q->elevator; + if (!list_empty(&q->queue_head)) + return 0; + if (e->ops->elevator_queue_empty_fn) return e->ops->elevator_queue_empty_fn(q); - return list_empty(&q->queue_head); + return 1; } struct request *elv_latter_request(request_queue_t *q, struct request *rq) @@ -528,11 +625,11 @@ void elv_completed_request(request_queue_t *q, struct request *rq) /* * request is released from the driver, io must be done */ - if (blk_account_rq(rq)) + if (blk_account_rq(rq)) { q->in_flight--; - - if (e->ops->elevator_completed_req_fn) - e->ops->elevator_completed_req_fn(q, rq); + if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn) + e->ops->elevator_completed_req_fn(q, rq); + } } int elv_register_queue(struct request_queue *q) @@ -705,11 +802,12 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name) return len; } +EXPORT_SYMBOL(elv_dispatch_insert); EXPORT_SYMBOL(elv_add_request); EXPORT_SYMBOL(__elv_add_request); EXPORT_SYMBOL(elv_requeue_request); EXPORT_SYMBOL(elv_next_request); -EXPORT_SYMBOL(elv_remove_request); +EXPORT_SYMBOL(elv_dequeue_request); EXPORT_SYMBOL(elv_queue_empty); EXPORT_SYMBOL(elv_completed_request); EXPORT_SYMBOL(elevator_exit); diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index 4e2b1b06b411..d2a66fd309c3 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -353,6 +353,8 @@ static void blk_pre_flush_end_io(struct request *flush_rq) struct request *rq = flush_rq->end_io_data; request_queue_t *q = rq->q; + elv_completed_request(q, flush_rq); + rq->flags |= REQ_BAR_PREFLUSH; if (!flush_rq->errors) @@ -369,6 +371,8 @@ static void blk_post_flush_end_io(struct request *flush_rq) struct request *rq = flush_rq->end_io_data; request_queue_t *q = rq->q; + elv_completed_request(q, flush_rq); + rq->flags |= REQ_BAR_POSTFLUSH; q->end_flush_fn(q, flush_rq); @@ -408,8 +412,6 @@ struct request *blk_start_pre_flush(request_queue_t *q, struct request *rq) if (!list_empty(&rq->queuelist)) blkdev_dequeue_request(rq); - elv_deactivate_request(q, rq); - flush_rq->end_io_data = rq; flush_rq->end_io = blk_pre_flush_end_io; @@ -1040,6 +1042,7 @@ EXPORT_SYMBOL(blk_queue_invalidate_tags); static char *rq_flags[] = { "REQ_RW", "REQ_FAILFAST", + "REQ_SORTED", "REQ_SOFTBARRIER", "REQ_HARDBARRIER", "REQ_CMD", @@ -2456,6 +2459,8 @@ static void __blk_put_request(request_queue_t *q, struct request *req) if (unlikely(--req->ref_count)) return; + elv_completed_request(q, req); + req->rq_status = RQ_INACTIVE; req->rl = NULL; @@ -2466,8 +2471,6 @@ static void __blk_put_request(request_queue_t *q, struct request *req) if (rl) { int rw = rq_data_dir(req); - elv_completed_request(q, req); - BUG_ON(!list_empty(&req->queuelist)); blk_free_request(q, req); @@ -2477,14 +2480,14 @@ static void __blk_put_request(request_queue_t *q, struct request *req) void blk_put_request(struct request *req) { + unsigned long flags; + request_queue_t *q = req->q; + /* - * if req->rl isn't set, this request didnt originate from the - * block layer, so it's safe to just disregard it + * Gee, IDE calls in w/ NULL q. Fix IDE and remove the + * following if (q) test. */ - if (req->rl) { - unsigned long flags; - request_queue_t *q = req->q; - + if (q) { spin_lock_irqsave(q->queue_lock, flags); __blk_put_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index efdc9b5bc05c..2c7b9154927a 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -203,6 +203,7 @@ struct request { enum rq_flag_bits { __REQ_RW, /* not set, read. set, write */ __REQ_FAILFAST, /* no low level driver retries */ + __REQ_SORTED, /* elevator knows about this request */ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */ __REQ_HARDBARRIER, /* may not be passed by drive either */ __REQ_CMD, /* is a regular fs rw request */ @@ -235,6 +236,7 @@ enum rq_flag_bits { #define REQ_RW (1 << __REQ_RW) #define REQ_FAILFAST (1 << __REQ_FAILFAST) +#define REQ_SORTED (1 << __REQ_SORTED) #define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER) #define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER) #define REQ_CMD (1 << __REQ_CMD) @@ -332,6 +334,13 @@ struct request_queue prepare_flush_fn *prepare_flush_fn; end_flush_fn *end_flush_fn; + /* + * Dispatch queue sorting + */ + sector_t last_sector; + struct request *boundary_rq; + unsigned int max_back_kb; + /* * Auto-unplugging state */ @@ -454,6 +463,7 @@ enum { #define blk_pm_request(rq) \ ((rq)->flags & (REQ_PM_SUSPEND | REQ_PM_RESUME)) +#define blk_sorted_rq(rq) ((rq)->flags & REQ_SORTED) #define blk_barrier_rq(rq) ((rq)->flags & REQ_HARDBARRIER) #define blk_barrier_preflush(rq) ((rq)->flags & REQ_BAR_PREFLUSH) #define blk_barrier_postflush(rq) ((rq)->flags & REQ_BAR_POSTFLUSH) @@ -611,12 +621,7 @@ extern void end_request(struct request *req, int uptodate); static inline void blkdev_dequeue_request(struct request *req) { - BUG_ON(list_empty(&req->queuelist)); - - list_del_init(&req->queuelist); - - if (req->rl) - elv_remove_request(req->q, req); + elv_dequeue_request(req->q, req); } /* diff --git a/include/linux/elevator.h b/include/linux/elevator.h index ea6bbc2d7407..76f4f6920744 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -8,18 +8,17 @@ typedef void (elevator_merge_req_fn) (request_queue_t *, struct request *, struc typedef void (elevator_merged_fn) (request_queue_t *, struct request *); -typedef struct request *(elevator_next_req_fn) (request_queue_t *); +typedef int (elevator_dispatch_fn) (request_queue_t *, int); -typedef void (elevator_add_req_fn) (request_queue_t *, struct request *, int); +typedef void (elevator_add_req_fn) (request_queue_t *, struct request *); typedef int (elevator_queue_empty_fn) (request_queue_t *); -typedef void (elevator_remove_req_fn) (request_queue_t *, struct request *); -typedef void (elevator_requeue_req_fn) (request_queue_t *, struct request *); typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct request *); typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *); typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *); typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int); typedef void (elevator_put_req_fn) (request_queue_t *, struct request *); +typedef void (elevator_activate_req_fn) (request_queue_t *, struct request *); typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *); typedef int (elevator_init_fn) (request_queue_t *, elevator_t *); @@ -31,10 +30,9 @@ struct elevator_ops elevator_merged_fn *elevator_merged_fn; elevator_merge_req_fn *elevator_merge_req_fn; - elevator_next_req_fn *elevator_next_req_fn; + elevator_dispatch_fn *elevator_dispatch_fn; elevator_add_req_fn *elevator_add_req_fn; - elevator_remove_req_fn *elevator_remove_req_fn; - elevator_requeue_req_fn *elevator_requeue_req_fn; + elevator_activate_req_fn *elevator_activate_req_fn; elevator_deactivate_req_fn *elevator_deactivate_req_fn; elevator_queue_empty_fn *elevator_queue_empty_fn; @@ -81,15 +79,15 @@ struct elevator_queue /* * block elevator interface */ +extern void elv_dispatch_insert(request_queue_t *, struct request *, int); extern void elv_add_request(request_queue_t *, struct request *, int, int); extern void __elv_add_request(request_queue_t *, struct request *, int, int); extern int elv_merge(request_queue_t *, struct request **, struct bio *); extern void elv_merge_requests(request_queue_t *, struct request *, struct request *); extern void elv_merged_request(request_queue_t *, struct request *); -extern void elv_remove_request(request_queue_t *, struct request *); +extern void elv_dequeue_request(request_queue_t *, struct request *); extern void elv_requeue_request(request_queue_t *, struct request *); -extern void elv_deactivate_request(request_queue_t *, struct request *); extern int elv_queue_empty(request_queue_t *); extern struct request *elv_next_request(struct request_queue *q); extern struct request *elv_former_request(request_queue_t *, struct request *); -- cgit v1.2.3 From 1b47f531e244e339b648dfff071c086f936e49e1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Oct 2005 16:37:00 +0200 Subject: [PATCH] generic dispatch fixes - Split elv_dispatch_insert() into two functions - Rename rq_last_sector() to rq_end_sector() Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 33 ++++++++++++--------------------- include/linux/blkdev.h | 13 ++++++++++++- include/linux/elevator.h | 4 +++- 3 files changed, 27 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index a27555908d35..237e43d760c8 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -40,11 +40,6 @@ static DEFINE_SPINLOCK(elv_list_lock); static LIST_HEAD(elv_list); -static inline sector_t rq_last_sector(struct request *rq) -{ - return rq->sector + rq->nr_sectors; -} - /* * can we safely merge with this request? */ @@ -148,7 +143,7 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, INIT_LIST_HEAD(&q->queue_head); q->last_merge = NULL; q->elevator = eq; - q->last_sector = 0; + q->end_sector = 0; q->boundary_rq = NULL; q->max_back_kb = 0; @@ -233,29 +228,25 @@ void elevator_exit(elevator_t *e) kfree(e); } +void elv_dispatch_insert_tail(request_queue_t *q, struct request *rq) +{ +} + /* * Insert rq into dispatch queue of q. Queue lock must be held on * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be * appended to the dispatch queue. To be used by specific elevators. */ -void elv_dispatch_insert(request_queue_t *q, struct request *rq, int sort) +void elv_dispatch_sort(request_queue_t *q, struct request *rq) { sector_t boundary; unsigned max_back; struct list_head *entry; - if (!sort) { - /* Specific elevator is performing sort. Step away. */ - q->last_sector = rq_last_sector(rq); - q->boundary_rq = rq; - list_add_tail(&rq->queuelist, &q->queue_head); - return; - } - - boundary = q->last_sector; + boundary = q->end_sector; max_back = q->max_back_kb * 2; boundary = boundary > max_back ? boundary - max_back : 0; - + list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); @@ -343,10 +334,10 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, where = ELEVATOR_INSERT_BACK; /* - * this request is scheduling boundary, update last_sector + * this request is scheduling boundary, update end_sector */ if (blk_fs_request(rq)) { - q->last_sector = rq_last_sector(rq); + q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; } } @@ -479,7 +470,7 @@ struct request *elv_next_request(request_queue_t *q) q->last_merge = NULL; if (!q->boundary_rq || q->boundary_rq == rq) { - q->last_sector = rq_last_sector(rq); + q->end_sector = rq_end_sector(rq); q->boundary_rq = NULL; } @@ -802,7 +793,7 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name) return len; } -EXPORT_SYMBOL(elv_dispatch_insert); +EXPORT_SYMBOL(elv_dispatch_sort); EXPORT_SYMBOL(elv_add_request); EXPORT_SYMBOL(__elv_add_request); EXPORT_SYMBOL(elv_requeue_request); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c7b9154927a..a2e496f285a4 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -337,7 +337,7 @@ struct request_queue /* * Dispatch queue sorting */ - sector_t last_sector; + sector_t end_sector; struct request *boundary_rq; unsigned int max_back_kb; @@ -624,6 +624,17 @@ static inline void blkdev_dequeue_request(struct request *req) elv_dequeue_request(req->q, req); } +/* + * This should be in elevator.h, but that requires pulling in rq and q + */ +static inline void elv_dispatch_add_tail(struct request_queue *q, + struct request *rq) +{ + q->end_sector = rq_end_sector(rq); + q->boundary_rq = rq; + list_add_tail(&rq->queuelist, &q->queue_head); +} + /* * Access functions for manipulating queue properties */ diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 76f4f6920744..f9b5ec38121a 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -79,7 +79,7 @@ struct elevator_queue /* * block elevator interface */ -extern void elv_dispatch_insert(request_queue_t *, struct request *, int); +extern void elv_dispatch_sort(request_queue_t *, struct request *); extern void elv_add_request(request_queue_t *, struct request *, int, int); extern void __elv_add_request(request_queue_t *, struct request *, int, int); extern int elv_merge(request_queue_t *, struct request **, struct bio *); @@ -140,4 +140,6 @@ enum { ELV_MQUEUE_MUST, }; +#define rq_end_sector(rq) ((rq)->sector + (rq)->nr_sectors) + #endif -- cgit v1.2.3 From d9ebb192aa13a026edc6faff137dcb14f2c91731 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Oct 2005 16:37:38 +0200 Subject: [PATCH] elevator: leftover function declaration Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 237e43d760c8..29d6c8237ab3 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -228,10 +228,6 @@ void elevator_exit(elevator_t *e) kfree(e); } -void elv_dispatch_insert_tail(request_queue_t *q, struct request *rq) -{ -} - /* * Insert rq into dispatch queue of q. Queue lock must be held on * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be -- cgit v1.2.3 From b4878f245ec8e168cdd1f170f823a750b7dd4af5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Oct 2005 16:42:29 +0200 Subject: [PATCH] 02/05: update ioscheds to use generic dispatch queue This patch updates all four ioscheds to use generic dispatch queue. There's one behavior change in as-iosched. * In as-iosched, when force dispatching (ELEVATOR_INSERT_BACK), batch_data_dir is reset to REQ_SYNC and changed_batch and new_batch are cleared to zero. This prevernts AS from doing incorrect update_write_batch after the forced dispatched requests are finished. * In cfq-iosched, cfqd->rq_in_driver currently counts the number of activated (removed) requests to determine whether queue-kicking is needed and cfq_max_depth has been reached. With generic dispatch queue, I think counting the number of dispatched requests would be more appropriate. * cfq_max_depth can be lowered to 1 again. Original from Tejun Heo, modified version applied. Signed-off-by: Jens Axboe --- drivers/block/as-iosched.c | 290 ++++++++++----------------------- drivers/block/cfq-iosched.c | 340 +++++++++------------------------------ drivers/block/deadline-iosched.c | 95 ++--------- drivers/block/noop-iosched.c | 17 +- 4 files changed, 187 insertions(+), 555 deletions(-) (limited to 'drivers') diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 95c0a3690b0f..1775ffe9edc7 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -98,7 +98,6 @@ struct as_data { struct as_rq *next_arq[2]; /* next in sort order */ sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */ - struct list_head *dispatch; /* driver dispatch queue */ struct list_head *hash; /* request hash */ unsigned long exit_prob; /* probability a task will exit while @@ -239,6 +238,25 @@ static struct io_context *as_get_io_context(void) return ioc; } +static void as_put_io_context(struct as_rq *arq) +{ + struct as_io_context *aic; + + if (unlikely(!arq->io_context)) + return; + + aic = arq->io_context->aic; + + if (arq->is_sync == REQ_SYNC && aic) { + spin_lock(&aic->lock); + set_bit(AS_TASK_IORUNNING, &aic->state); + aic->last_end_request = jiffies; + spin_unlock(&aic->lock); + } + + put_io_context(arq->io_context); +} + /* * the back merge hash support functions */ @@ -950,23 +968,12 @@ static void as_completed_request(request_queue_t *q, struct request *rq) WARN_ON(!list_empty(&rq->queuelist)); - if (arq->state == AS_RQ_PRESCHED) { - WARN_ON(arq->io_context); - goto out; - } - - if (arq->state == AS_RQ_MERGED) - goto out_ioc; - if (arq->state != AS_RQ_REMOVED) { printk("arq->state %d\n", arq->state); WARN_ON(1); goto out; } - if (!blk_fs_request(rq)) - goto out; - if (ad->changed_batch && ad->nr_dispatched == 1) { kblockd_schedule_work(&ad->antic_work); ad->changed_batch = 0; @@ -1001,21 +1008,7 @@ static void as_completed_request(request_queue_t *q, struct request *rq) } } -out_ioc: - if (!arq->io_context) - goto out; - - if (arq->is_sync == REQ_SYNC) { - struct as_io_context *aic = arq->io_context->aic; - if (aic) { - spin_lock(&aic->lock); - set_bit(AS_TASK_IORUNNING, &aic->state); - aic->last_end_request = jiffies; - spin_unlock(&aic->lock); - } - } - - put_io_context(arq->io_context); + as_put_io_context(arq); out: arq->state = AS_RQ_POSTSCHED; } @@ -1051,68 +1044,6 @@ static void as_remove_queued_request(request_queue_t *q, struct request *rq) as_del_arq_rb(ad, arq); } -/* - * as_remove_dispatched_request is called to remove a request which has gone - * to the dispatch list. - */ -static void as_remove_dispatched_request(request_queue_t *q, struct request *rq) -{ - struct as_rq *arq = RQ_DATA(rq); - struct as_io_context *aic; - - if (!arq) { - WARN_ON(1); - return; - } - - WARN_ON(arq->state != AS_RQ_DISPATCHED); - WARN_ON(ON_RB(&arq->rb_node)); - if (arq->io_context && arq->io_context->aic) { - aic = arq->io_context->aic; - if (aic) { - WARN_ON(!atomic_read(&aic->nr_dispatched)); - atomic_dec(&aic->nr_dispatched); - } - } -} - -/* - * as_remove_request is called when a driver has finished with a request. - * This should be only called for dispatched requests, but for some reason - * a POWER4 box running hwscan it does not. - */ -static void as_remove_request(request_queue_t *q, struct request *rq) -{ - struct as_rq *arq = RQ_DATA(rq); - - if (unlikely(arq->state == AS_RQ_NEW)) - goto out; - - if (ON_RB(&arq->rb_node)) { - if (arq->state != AS_RQ_QUEUED) { - printk("arq->state %d\n", arq->state); - WARN_ON(1); - goto out; - } - /* - * We'll lose the aliased request(s) here. I don't think this - * will ever happen, but if it does, hopefully someone will - * report it. - */ - WARN_ON(!list_empty(&rq->queuelist)); - as_remove_queued_request(q, rq); - } else { - if (arq->state != AS_RQ_DISPATCHED) { - printk("arq->state %d\n", arq->state); - WARN_ON(1); - goto out; - } - as_remove_dispatched_request(q, rq); - } -out: - arq->state = AS_RQ_REMOVED; -} - /* * as_fifo_expired returns 0 if there are no expired reads on the fifo, * 1 otherwise. It is ratelimited so that we only perform the check once per @@ -1165,7 +1096,6 @@ static inline int as_batch_expired(struct as_data *ad) static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) { struct request *rq = arq->request; - struct list_head *insert; const int data_dir = arq->is_sync; BUG_ON(!ON_RB(&arq->rb_node)); @@ -1198,13 +1128,13 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) /* * take it off the sort and fifo list, add to dispatch queue */ - insert = ad->dispatch->prev; - while (!list_empty(&rq->queuelist)) { struct request *__rq = list_entry_rq(rq->queuelist.next); struct as_rq *__arq = RQ_DATA(__rq); - list_move_tail(&__rq->queuelist, ad->dispatch); + list_del(&__rq->queuelist); + + elv_dispatch_add_tail(ad->q, __rq); if (__arq->io_context && __arq->io_context->aic) atomic_inc(&__arq->io_context->aic->nr_dispatched); @@ -1218,7 +1148,8 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) as_remove_queued_request(ad->q, rq); WARN_ON(arq->state != AS_RQ_QUEUED); - list_add(&rq->queuelist, insert); + elv_dispatch_sort(ad->q, rq); + arq->state = AS_RQ_DISPATCHED; if (arq->io_context && arq->io_context->aic) atomic_inc(&arq->io_context->aic->nr_dispatched); @@ -1230,12 +1161,42 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) * read/write expire, batch expire, etc, and moves it to the dispatch * queue. Returns 1 if a request was found, 0 otherwise. */ -static int as_dispatch_request(struct as_data *ad) +static int as_dispatch_request(request_queue_t *q, int force) { + struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq; const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]); const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]); + if (unlikely(force)) { + /* + * Forced dispatch, accounting is useless. Reset + * accounting states and dump fifo_lists. Note that + * batch_data_dir is reset to REQ_SYNC to avoid + * screwing write batch accounting as write batch + * accounting occurs on W->R transition. + */ + int dispatched = 0; + + ad->batch_data_dir = REQ_SYNC; + ad->changed_batch = 0; + ad->new_batch = 0; + + while (ad->next_arq[REQ_SYNC]) { + as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]); + dispatched++; + } + ad->last_check_fifo[REQ_SYNC] = jiffies; + + while (ad->next_arq[REQ_ASYNC]) { + as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]); + dispatched++; + } + ad->last_check_fifo[REQ_ASYNC] = jiffies; + + return dispatched; + } + /* Signal that the write batch was uncontended, so we can't time it */ if (ad->batch_data_dir == REQ_ASYNC && !reads) { if (ad->current_write_count == 0 || !writes) @@ -1359,20 +1320,6 @@ fifo_expired: return 1; } -static struct request *as_next_request(request_queue_t *q) -{ - struct as_data *ad = q->elevator->elevator_data; - struct request *rq = NULL; - - /* - * if there are still requests on the dispatch queue, grab the first - */ - if (!list_empty(ad->dispatch) || as_dispatch_request(ad)) - rq = list_entry_rq(ad->dispatch->next); - - return rq; -} - /* * Add arq to a list behind alias */ @@ -1410,11 +1357,19 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia /* * add arq to rbtree and fifo */ -static void as_add_request(struct as_data *ad, struct as_rq *arq) +static void as_add_request(request_queue_t *q, struct request *rq) { + struct as_data *ad = q->elevator->elevator_data; + struct as_rq *arq = RQ_DATA(rq); struct as_rq *alias; int data_dir; + if (arq->state != AS_RQ_PRESCHED) { + printk("arq->state: %d\n", arq->state); + WARN_ON(1); + } + arq->state = AS_RQ_NEW; + if (rq_data_dir(arq->request) == READ || current->flags&PF_SYNCWRITE) arq->is_sync = 1; @@ -1463,96 +1418,24 @@ static void as_add_request(struct as_data *ad, struct as_rq *arq) arq->state = AS_RQ_QUEUED; } -static void as_deactivate_request(request_queue_t *q, struct request *rq) +static void as_activate_request(request_queue_t *q, struct request *rq) { - struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq = RQ_DATA(rq); - if (arq) { - if (arq->state == AS_RQ_REMOVED) { - arq->state = AS_RQ_DISPATCHED; - if (arq->io_context && arq->io_context->aic) - atomic_inc(&arq->io_context->aic->nr_dispatched); - } - } else - WARN_ON(blk_fs_request(rq) - && (!(rq->flags & (REQ_HARDBARRIER|REQ_SOFTBARRIER))) ); - - /* Stop anticipating - let this request get through */ - as_antic_stop(ad); -} - -/* - * requeue the request. The request has not been completed, nor is it a - * new request, so don't touch accounting. - */ -static void as_requeue_request(request_queue_t *q, struct request *rq) -{ - as_deactivate_request(q, rq); - list_add(&rq->queuelist, &q->queue_head); -} - -/* - * Account a request that is inserted directly onto the dispatch queue. - * arq->io_context->aic->nr_dispatched should not need to be incremented - * because only new requests should come through here: requeues go through - * our explicit requeue handler. - */ -static void as_account_queued_request(struct as_data *ad, struct request *rq) -{ - if (blk_fs_request(rq)) { - struct as_rq *arq = RQ_DATA(rq); - arq->state = AS_RQ_DISPATCHED; - ad->nr_dispatched++; - } + WARN_ON(arq->state != AS_RQ_DISPATCHED); + arq->state = AS_RQ_REMOVED; + if (arq->io_context && arq->io_context->aic) + atomic_dec(&arq->io_context->aic->nr_dispatched); } -static void -as_insert_request(request_queue_t *q, struct request *rq, int where) +static void as_deactivate_request(request_queue_t *q, struct request *rq) { - struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq = RQ_DATA(rq); - if (arq) { - if (arq->state != AS_RQ_PRESCHED) { - printk("arq->state: %d\n", arq->state); - WARN_ON(1); - } - arq->state = AS_RQ_NEW; - } - - /* barriers must flush the reorder queue */ - if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) - && where == ELEVATOR_INSERT_SORT)) { - WARN_ON(1); - where = ELEVATOR_INSERT_BACK; - } - - switch (where) { - case ELEVATOR_INSERT_BACK: - while (ad->next_arq[REQ_SYNC]) - as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]); - - while (ad->next_arq[REQ_ASYNC]) - as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]); - - list_add_tail(&rq->queuelist, ad->dispatch); - as_account_queued_request(ad, rq); - as_antic_stop(ad); - break; - case ELEVATOR_INSERT_FRONT: - list_add(&rq->queuelist, ad->dispatch); - as_account_queued_request(ad, rq); - as_antic_stop(ad); - break; - case ELEVATOR_INSERT_SORT: - BUG_ON(!blk_fs_request(rq)); - as_add_request(ad, arq); - break; - default: - BUG(); - return; - } + WARN_ON(arq->state != AS_RQ_REMOVED); + arq->state = AS_RQ_DISPATCHED; + if (arq->io_context && arq->io_context->aic) + atomic_inc(&arq->io_context->aic->nr_dispatched); } /* @@ -1565,12 +1448,8 @@ static int as_queue_empty(request_queue_t *q) { struct as_data *ad = q->elevator->elevator_data; - if (!list_empty(&ad->fifo_list[REQ_ASYNC]) - || !list_empty(&ad->fifo_list[REQ_SYNC]) - || !list_empty(ad->dispatch)) - return 0; - - return 1; + return list_empty(&ad->fifo_list[REQ_ASYNC]) + && list_empty(&ad->fifo_list[REQ_SYNC]); } static struct request * @@ -1763,6 +1642,7 @@ as_merged_requests(request_queue_t *q, struct request *req, * kill knowledge of next, this one is a goner */ as_remove_queued_request(q, next); + as_put_io_context(anext); anext->state = AS_RQ_MERGED; } @@ -1782,7 +1662,7 @@ static void as_work_handler(void *data) unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); - if (as_next_request(q)) + if (!as_queue_empty(q)) q->request_fn(q); spin_unlock_irqrestore(q->queue_lock, flags); } @@ -1797,7 +1677,9 @@ static void as_put_request(request_queue_t *q, struct request *rq) return; } - if (arq->state != AS_RQ_POSTSCHED && arq->state != AS_RQ_PRESCHED) { + if (unlikely(arq->state != AS_RQ_POSTSCHED && + arq->state != AS_RQ_PRESCHED && + arq->state != AS_RQ_MERGED)) { printk("arq->state %d\n", arq->state); WARN_ON(1); } @@ -1907,7 +1789,6 @@ static int as_init_queue(request_queue_t *q, elevator_t *e) INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]); ad->sort_list[REQ_SYNC] = RB_ROOT; ad->sort_list[REQ_ASYNC] = RB_ROOT; - ad->dispatch = &q->queue_head; ad->fifo_expire[REQ_SYNC] = default_read_expire; ad->fifo_expire[REQ_ASYNC] = default_write_expire; ad->antic_expire = default_antic_expire; @@ -2072,10 +1953,9 @@ static struct elevator_type iosched_as = { .elevator_merge_fn = as_merge, .elevator_merged_fn = as_merged_request, .elevator_merge_req_fn = as_merged_requests, - .elevator_next_req_fn = as_next_request, - .elevator_add_req_fn = as_insert_request, - .elevator_remove_req_fn = as_remove_request, - .elevator_requeue_req_fn = as_requeue_request, + .elevator_dispatch_fn = as_dispatch_request, + .elevator_add_req_fn = as_add_request, + .elevator_activate_req_fn = as_activate_request, .elevator_deactivate_req_fn = as_deactivate_request, .elevator_queue_empty_fn = as_queue_empty, .elevator_completed_req_fn = as_completed_request, diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index cd056e7e64ec..7b14160e0798 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -84,7 +84,6 @@ static int cfq_max_depth = 2; (node)->rb_left = NULL; \ } while (0) #define RB_CLEAR_ROOT(root) ((root)->rb_node = NULL) -#define ON_RB(node) ((node)->rb_color != RB_NONE) #define rb_entry_crq(node) rb_entry((node), struct cfq_rq, rb_node) #define rq_rb_key(rq) (rq)->sector @@ -271,10 +270,7 @@ CFQ_CFQQ_FNS(expired); #undef CFQ_CFQQ_FNS enum cfq_rq_state_flags { - CFQ_CRQ_FLAG_in_flight = 0, - CFQ_CRQ_FLAG_in_driver, - CFQ_CRQ_FLAG_is_sync, - CFQ_CRQ_FLAG_requeued, + CFQ_CRQ_FLAG_is_sync = 0, }; #define CFQ_CRQ_FNS(name) \ @@ -291,14 +287,11 @@ static inline int cfq_crq_##name(const struct cfq_rq *crq) \ return (crq->crq_flags & (1 << CFQ_CRQ_FLAG_##name)) != 0; \ } -CFQ_CRQ_FNS(in_flight); -CFQ_CRQ_FNS(in_driver); CFQ_CRQ_FNS(is_sync); -CFQ_CRQ_FNS(requeued); #undef CFQ_CRQ_FNS static struct cfq_queue *cfq_find_cfq_hash(struct cfq_data *, unsigned int, unsigned short); -static void cfq_dispatch_sort(request_queue_t *, struct cfq_rq *); +static void cfq_dispatch_insert(request_queue_t *, struct cfq_rq *); static void cfq_put_cfqd(struct cfq_data *cfqd); #define process_sync(tsk) ((tsk)->flags & PF_SYNCWRITE) @@ -347,18 +340,13 @@ static struct request *cfq_find_rq_hash(struct cfq_data *cfqd, sector_t offset) return NULL; } -static inline int cfq_pending_requests(struct cfq_data *cfqd) -{ - return !list_empty(&cfqd->queue->queue_head) || cfqd->busy_queues; -} - /* * scheduler run of queue, if there are requests pending and no one in the * driver that will restart queueing */ static inline void cfq_schedule_dispatch(struct cfq_data *cfqd) { - if (!cfqd->rq_in_driver && cfq_pending_requests(cfqd)) + if (!cfqd->rq_in_driver && cfqd->busy_queues) kblockd_schedule_work(&cfqd->unplug_work); } @@ -366,7 +354,7 @@ static int cfq_queue_empty(request_queue_t *q) { struct cfq_data *cfqd = q->elevator->elevator_data; - return !cfq_pending_requests(cfqd); + return !cfqd->busy_queues; } /* @@ -386,11 +374,6 @@ cfq_choose_req(struct cfq_data *cfqd, struct cfq_rq *crq1, struct cfq_rq *crq2) if (crq2 == NULL) return crq1; - if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2)) - return crq1; - else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1)) - return crq2; - if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2)) return crq1; else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1)) @@ -461,10 +444,7 @@ cfq_find_next_crq(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_rq *crq_next = NULL, *crq_prev = NULL; struct rb_node *rbnext, *rbprev; - rbnext = NULL; - if (ON_RB(&last->rb_node)) - rbnext = rb_next(&last->rb_node); - if (!rbnext) { + if (!(rbnext = rb_next(&last->rb_node))) { rbnext = rb_first(&cfqq->sort_list); if (rbnext == &last->rb_node) rbnext = NULL; @@ -545,13 +525,13 @@ static void cfq_resort_rr_list(struct cfq_queue *cfqq, int preempted) * the pending list according to last request service */ static inline void -cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq, int requeue) +cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) { BUG_ON(cfq_cfqq_on_rr(cfqq)); cfq_mark_cfqq_on_rr(cfqq); cfqd->busy_queues++; - cfq_resort_rr_list(cfqq, requeue); + cfq_resort_rr_list(cfqq, 0); } static inline void @@ -571,22 +551,19 @@ cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) static inline void cfq_del_crq_rb(struct cfq_rq *crq) { struct cfq_queue *cfqq = crq->cfq_queue; + struct cfq_data *cfqd = cfqq->cfqd; + const int sync = cfq_crq_is_sync(crq); - if (ON_RB(&crq->rb_node)) { - struct cfq_data *cfqd = cfqq->cfqd; - const int sync = cfq_crq_is_sync(crq); - - BUG_ON(!cfqq->queued[sync]); - cfqq->queued[sync]--; + BUG_ON(!cfqq->queued[sync]); + cfqq->queued[sync]--; - cfq_update_next_crq(crq); + cfq_update_next_crq(crq); - rb_erase(&crq->rb_node, &cfqq->sort_list); - RB_CLEAR_COLOR(&crq->rb_node); + rb_erase(&crq->rb_node, &cfqq->sort_list); + RB_CLEAR_COLOR(&crq->rb_node); - if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list)) - cfq_del_cfqq_rr(cfqd, cfqq); - } + if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list)) + cfq_del_cfqq_rr(cfqd, cfqq); } static struct cfq_rq * @@ -627,12 +604,12 @@ static void cfq_add_crq_rb(struct cfq_rq *crq) * if that happens, put the alias on the dispatch list */ while ((__alias = __cfq_add_crq_rb(crq)) != NULL) - cfq_dispatch_sort(cfqd->queue, __alias); + cfq_dispatch_insert(cfqd->queue, __alias); rb_insert_color(&crq->rb_node, &cfqq->sort_list); if (!cfq_cfqq_on_rr(cfqq)) - cfq_add_cfqq_rr(cfqd, cfqq, cfq_crq_requeued(crq)); + cfq_add_cfqq_rr(cfqd, cfqq); /* * check if this request is a better next-serve candidate @@ -643,10 +620,8 @@ static void cfq_add_crq_rb(struct cfq_rq *crq) static inline void cfq_reposition_crq_rb(struct cfq_queue *cfqq, struct cfq_rq *crq) { - if (ON_RB(&crq->rb_node)) { - rb_erase(&crq->rb_node, &cfqq->sort_list); - cfqq->queued[cfq_crq_is_sync(crq)]--; - } + rb_erase(&crq->rb_node, &cfqq->sort_list); + cfqq->queued[cfq_crq_is_sync(crq)]--; cfq_add_crq_rb(crq); } @@ -676,49 +651,28 @@ out: return NULL; } -static void cfq_deactivate_request(request_queue_t *q, struct request *rq) +static void cfq_activate_request(request_queue_t *q, struct request *rq) { struct cfq_data *cfqd = q->elevator->elevator_data; - struct cfq_rq *crq = RQ_DATA(rq); - - if (crq) { - struct cfq_queue *cfqq = crq->cfq_queue; - if (cfq_crq_in_driver(crq)) { - cfq_clear_crq_in_driver(crq); - WARN_ON(!cfqd->rq_in_driver); - cfqd->rq_in_driver--; - } - if (cfq_crq_in_flight(crq)) { - const int sync = cfq_crq_is_sync(crq); - - cfq_clear_crq_in_flight(crq); - WARN_ON(!cfqq->on_dispatch[sync]); - cfqq->on_dispatch[sync]--; - } - cfq_mark_crq_requeued(crq); - } + cfqd->rq_in_driver++; } -/* - * make sure the service time gets corrected on reissue of this request - */ -static void cfq_requeue_request(request_queue_t *q, struct request *rq) +static void cfq_deactivate_request(request_queue_t *q, struct request *rq) { - cfq_deactivate_request(q, rq); - list_add(&rq->queuelist, &q->queue_head); + struct cfq_data *cfqd = q->elevator->elevator_data; + + WARN_ON(!cfqd->rq_in_driver); + cfqd->rq_in_driver--; } -static void cfq_remove_request(request_queue_t *q, struct request *rq) +static void cfq_remove_request(struct request *rq) { struct cfq_rq *crq = RQ_DATA(rq); - if (crq) { - list_del_init(&rq->queuelist); - cfq_del_crq_rb(crq); - cfq_remove_merge_hints(q, crq); - - } + list_del_init(&rq->queuelist); + cfq_del_crq_rb(crq); + cfq_remove_merge_hints(rq->q, crq); } static int @@ -762,7 +716,7 @@ static void cfq_merged_request(request_queue_t *q, struct request *req) cfq_del_crq_hash(crq); cfq_add_crq_hash(cfqd, crq); - if (ON_RB(&crq->rb_node) && (rq_rb_key(req) != crq->rb_key)) { + if (rq_rb_key(req) != crq->rb_key) { struct cfq_queue *cfqq = crq->cfq_queue; cfq_update_next_crq(crq); @@ -785,7 +739,7 @@ cfq_merged_requests(request_queue_t *q, struct request *rq, time_before(next->start_time, rq->start_time)) list_move(&rq->queuelist, &next->queuelist); - cfq_remove_request(q, next); + cfq_remove_request(next); } static inline void @@ -992,53 +946,15 @@ static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq) return 1; } -/* - * we dispatch cfqd->cfq_quantum requests in total from the rr_list queues, - * this function sector sorts the selected request to minimize seeks. we start - * at cfqd->last_sector, not 0. - */ -static void cfq_dispatch_sort(request_queue_t *q, struct cfq_rq *crq) +static void cfq_dispatch_insert(request_queue_t *q, struct cfq_rq *crq) { struct cfq_data *cfqd = q->elevator->elevator_data; struct cfq_queue *cfqq = crq->cfq_queue; - struct list_head *head = &q->queue_head, *entry = head; - struct request *__rq; - sector_t last; - - list_del(&crq->request->queuelist); - - last = cfqd->last_sector; - list_for_each_entry_reverse(__rq, head, queuelist) { - struct cfq_rq *__crq = RQ_DATA(__rq); - - if (blk_barrier_rq(__rq)) - break; - if (!blk_fs_request(__rq)) - break; - if (cfq_crq_requeued(__crq)) - break; - - if (__rq->sector <= crq->request->sector) - break; - if (__rq->sector > last && crq->request->sector < last) { - last = crq->request->sector + crq->request->nr_sectors; - break; - } - entry = &__rq->queuelist; - } - - cfqd->last_sector = last; cfqq->next_crq = cfq_find_next_crq(cfqd, cfqq, crq); - - cfq_del_crq_rb(crq); - cfq_remove_merge_hints(q, crq); - - cfq_mark_crq_in_flight(crq); - cfq_clear_crq_requeued(crq); - + cfq_remove_request(crq->request); cfqq->on_dispatch[cfq_crq_is_sync(crq)]++; - list_add_tail(&crq->request->queuelist, entry); + elv_dispatch_sort(q, crq->request); } /* @@ -1159,7 +1075,7 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, /* * finally, insert request into driver dispatch list */ - cfq_dispatch_sort(cfqd->queue, crq); + cfq_dispatch_insert(cfqd->queue, crq); cfqd->dispatch_slice++; dispatched++; @@ -1194,7 +1110,7 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, } static int -cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force) +cfq_dispatch_requests(request_queue_t *q, int force) { struct cfq_data *cfqd = q->elevator->elevator_data; struct cfq_queue *cfqq; @@ -1204,12 +1120,25 @@ cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force) cfqq = cfq_select_queue(cfqd, force); if (cfqq) { + int max_dispatch; + + /* + * if idle window is disabled, allow queue buildup + */ + if (!cfq_cfqq_idle_window(cfqq) && + cfqd->rq_in_driver >= cfqd->cfq_max_depth) + return 0; + cfq_clear_cfqq_must_dispatch(cfqq); cfq_clear_cfqq_wait_request(cfqq); del_timer(&cfqd->idle_slice_timer); - if (cfq_class_idle(cfqq)) - max_dispatch = 1; + if (!force) { + max_dispatch = cfqd->cfq_quantum; + if (cfq_class_idle(cfqq)) + max_dispatch = 1; + } else + max_dispatch = INT_MAX; return __cfq_dispatch_requests(cfqd, cfqq, max_dispatch); } @@ -1217,93 +1146,6 @@ cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force) return 0; } -static inline void cfq_account_dispatch(struct cfq_rq *crq) -{ - struct cfq_queue *cfqq = crq->cfq_queue; - struct cfq_data *cfqd = cfqq->cfqd; - - if (unlikely(!blk_fs_request(crq->request))) - return; - - /* - * accounted bit is necessary since some drivers will call - * elv_next_request() many times for the same request (eg ide) - */ - if (cfq_crq_in_driver(crq)) - return; - - cfq_mark_crq_in_driver(crq); - cfqd->rq_in_driver++; -} - -static inline void -cfq_account_completion(struct cfq_queue *cfqq, struct cfq_rq *crq) -{ - struct cfq_data *cfqd = cfqq->cfqd; - unsigned long now; - - if (!cfq_crq_in_driver(crq)) - return; - - now = jiffies; - - WARN_ON(!cfqd->rq_in_driver); - cfqd->rq_in_driver--; - - if (!cfq_class_idle(cfqq)) - cfqd->last_end_request = now; - - if (!cfq_cfqq_dispatched(cfqq)) { - if (cfq_cfqq_on_rr(cfqq)) { - cfqq->service_last = now; - cfq_resort_rr_list(cfqq, 0); - } - if (cfq_cfqq_expired(cfqq)) { - __cfq_slice_expired(cfqd, cfqq, 0); - cfq_schedule_dispatch(cfqd); - } - } - - if (cfq_crq_is_sync(crq)) - crq->io_context->last_end_request = now; -} - -static struct request *cfq_next_request(request_queue_t *q) -{ - struct cfq_data *cfqd = q->elevator->elevator_data; - struct request *rq; - - if (!list_empty(&q->queue_head)) { - struct cfq_rq *crq; -dispatch: - rq = list_entry_rq(q->queue_head.next); - - crq = RQ_DATA(rq); - if (crq) { - struct cfq_queue *cfqq = crq->cfq_queue; - - /* - * if idle window is disabled, allow queue buildup - */ - if (!cfq_crq_in_driver(crq) && - !cfq_cfqq_idle_window(cfqq) && - !blk_barrier_rq(rq) && - cfqd->rq_in_driver >= cfqd->cfq_max_depth) - return NULL; - - cfq_remove_merge_hints(q, crq); - cfq_account_dispatch(crq); - } - - return rq; - } - - if (cfq_dispatch_requests(q, cfqd->cfq_quantum, 0)) - goto dispatch; - - return NULL; -} - /* * task holds one reference to the queue, dropped when task exits. each crq * in-flight on this queue also holds a reference, dropped when crq is freed. @@ -1816,8 +1658,9 @@ cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, } } -static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq) +static void cfq_insert_request(request_queue_t *q, struct request *rq) { + struct cfq_data *cfqd = q->elevator->elevator_data; struct cfq_rq *crq = RQ_DATA(rq); struct cfq_queue *cfqq = crq->cfq_queue; @@ -1837,56 +1680,37 @@ static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq) cfq_crq_enqueued(cfqd, cfqq, crq); } -static void -cfq_insert_request(request_queue_t *q, struct request *rq, int where) -{ - struct cfq_data *cfqd = q->elevator->elevator_data; - - switch (where) { - case ELEVATOR_INSERT_BACK: - while (cfq_dispatch_requests(q, INT_MAX, 1)) - ; - list_add_tail(&rq->queuelist, &q->queue_head); - /* - * If we were idling with pending requests on - * inactive cfqqs, force dispatching will - * remove the idle timer and the queue won't - * be kicked by __make_request() afterward. - * Kick it here. - */ - cfq_schedule_dispatch(cfqd); - break; - case ELEVATOR_INSERT_FRONT: - list_add(&rq->queuelist, &q->queue_head); - break; - case ELEVATOR_INSERT_SORT: - BUG_ON(!blk_fs_request(rq)); - cfq_enqueue(cfqd, rq); - break; - default: - printk("%s: bad insert point %d\n", __FUNCTION__,where); - return; - } -} - static void cfq_completed_request(request_queue_t *q, struct request *rq) { struct cfq_rq *crq = RQ_DATA(rq); - struct cfq_queue *cfqq; + struct cfq_queue *cfqq = crq->cfq_queue; + struct cfq_data *cfqd = cfqq->cfqd; + const int sync = cfq_crq_is_sync(crq); + unsigned long now; - if (unlikely(!blk_fs_request(rq))) - return; + now = jiffies; - cfqq = crq->cfq_queue; + WARN_ON(!cfqd->rq_in_driver); + WARN_ON(!cfqq->on_dispatch[sync]); + cfqd->rq_in_driver--; + cfqq->on_dispatch[sync]--; - if (cfq_crq_in_flight(crq)) { - const int sync = cfq_crq_is_sync(crq); + if (!cfq_class_idle(cfqq)) + cfqd->last_end_request = now; - WARN_ON(!cfqq->on_dispatch[sync]); - cfqq->on_dispatch[sync]--; + if (!cfq_cfqq_dispatched(cfqq)) { + if (cfq_cfqq_on_rr(cfqq)) { + cfqq->service_last = now; + cfq_resort_rr_list(cfqq, 0); + } + if (cfq_cfqq_expired(cfqq)) { + __cfq_slice_expired(cfqd, cfqq, 0); + cfq_schedule_dispatch(cfqd); + } } - cfq_account_completion(cfqq, crq); + if (cfq_crq_is_sync(crq)) + crq->io_context->last_end_request = now; } static struct request * @@ -2118,9 +1942,6 @@ cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio, INIT_HLIST_NODE(&crq->hash); crq->cfq_queue = cfqq; crq->io_context = cic; - cfq_clear_crq_in_flight(crq); - cfq_clear_crq_in_driver(crq); - cfq_clear_crq_requeued(crq); if (rw == READ || process_sync(tsk)) cfq_mark_crq_is_sync(crq); @@ -2201,7 +2022,7 @@ static void cfq_idle_slice_timer(unsigned long data) * only expire and reinvoke request handler, if there are * other queues with pending requests */ - if (!cfq_pending_requests(cfqd)) { + if (!cfqd->busy_queues) { cfqd->idle_slice_timer.expires = min(now + cfqd->cfq_slice_idle, cfqq->slice_end); add_timer(&cfqd->idle_slice_timer); goto out_cont; @@ -2576,10 +2397,9 @@ static struct elevator_type iosched_cfq = { .elevator_merge_fn = cfq_merge, .elevator_merged_fn = cfq_merged_request, .elevator_merge_req_fn = cfq_merged_requests, - .elevator_next_req_fn = cfq_next_request, + .elevator_dispatch_fn = cfq_dispatch_requests, .elevator_add_req_fn = cfq_insert_request, - .elevator_remove_req_fn = cfq_remove_request, - .elevator_requeue_req_fn = cfq_requeue_request, + .elevator_activate_req_fn = cfq_activate_request, .elevator_deactivate_req_fn = cfq_deactivate_request, .elevator_queue_empty_fn = cfq_queue_empty, .elevator_completed_req_fn = cfq_completed_request, diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c index 52a3ae5289a0..07de4d24ddba 100644 --- a/drivers/block/deadline-iosched.c +++ b/drivers/block/deadline-iosched.c @@ -50,7 +50,6 @@ struct deadline_data { * next in sort order. read, write or both are NULL */ struct deadline_rq *next_drq[2]; - struct list_head *dispatch; /* driver dispatch queue */ struct list_head *hash; /* request hash */ unsigned int batching; /* number of sequential requests made */ sector_t last_sector; /* head position */ @@ -239,10 +238,9 @@ deadline_del_drq_rb(struct deadline_data *dd, struct deadline_rq *drq) dd->next_drq[data_dir] = rb_entry_drq(rbnext); } - if (ON_RB(&drq->rb_node)) { - rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq)); - RB_CLEAR(&drq->rb_node); - } + BUG_ON(!ON_RB(&drq->rb_node)); + rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq)); + RB_CLEAR(&drq->rb_node); } static struct request * @@ -286,7 +284,7 @@ deadline_find_first_drq(struct deadline_data *dd, int data_dir) /* * add drq to rbtree and fifo */ -static inline void +static void deadline_add_request(struct request_queue *q, struct request *rq) { struct deadline_data *dd = q->elevator->elevator_data; @@ -315,14 +313,11 @@ deadline_add_request(struct request_queue *q, struct request *rq) static void deadline_remove_request(request_queue_t *q, struct request *rq) { struct deadline_rq *drq = RQ_DATA(rq); + struct deadline_data *dd = q->elevator->elevator_data; - if (drq) { - struct deadline_data *dd = q->elevator->elevator_data; - - list_del_init(&drq->fifo); - deadline_remove_merge_hints(q, drq); - deadline_del_drq_rb(dd, drq); - } + list_del_init(&drq->fifo); + deadline_remove_merge_hints(q, drq); + deadline_del_drq_rb(dd, drq); } static int @@ -452,7 +447,7 @@ deadline_move_to_dispatch(struct deadline_data *dd, struct deadline_rq *drq) request_queue_t *q = drq->request->q; deadline_remove_request(q, drq->request); - list_add_tail(&drq->request->queuelist, dd->dispatch); + elv_dispatch_add_tail(q, drq->request); } /* @@ -502,8 +497,9 @@ static inline int deadline_check_fifo(struct deadline_data *dd, int ddir) * deadline_dispatch_requests selects the best request according to * read/write expire, fifo_batch, etc */ -static int deadline_dispatch_requests(struct deadline_data *dd) +static int deadline_dispatch_requests(request_queue_t *q, int force) { + struct deadline_data *dd = q->elevator->elevator_data; const int reads = !list_empty(&dd->fifo_list[READ]); const int writes = !list_empty(&dd->fifo_list[WRITE]); struct deadline_rq *drq; @@ -597,65 +593,12 @@ dispatch_request: return 1; } -static struct request *deadline_next_request(request_queue_t *q) -{ - struct deadline_data *dd = q->elevator->elevator_data; - struct request *rq; - - /* - * if there are still requests on the dispatch queue, grab the first one - */ - if (!list_empty(dd->dispatch)) { -dispatch: - rq = list_entry_rq(dd->dispatch->next); - return rq; - } - - if (deadline_dispatch_requests(dd)) - goto dispatch; - - return NULL; -} - -static void -deadline_insert_request(request_queue_t *q, struct request *rq, int where) -{ - struct deadline_data *dd = q->elevator->elevator_data; - - /* barriers must flush the reorder queue */ - if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) - && where == ELEVATOR_INSERT_SORT)) - where = ELEVATOR_INSERT_BACK; - - switch (where) { - case ELEVATOR_INSERT_BACK: - while (deadline_dispatch_requests(dd)) - ; - list_add_tail(&rq->queuelist, dd->dispatch); - break; - case ELEVATOR_INSERT_FRONT: - list_add(&rq->queuelist, dd->dispatch); - break; - case ELEVATOR_INSERT_SORT: - BUG_ON(!blk_fs_request(rq)); - deadline_add_request(q, rq); - break; - default: - printk("%s: bad insert point %d\n", __FUNCTION__,where); - return; - } -} - static int deadline_queue_empty(request_queue_t *q) { struct deadline_data *dd = q->elevator->elevator_data; - if (!list_empty(&dd->fifo_list[WRITE]) - || !list_empty(&dd->fifo_list[READ]) - || !list_empty(dd->dispatch)) - return 0; - - return 1; + return list_empty(&dd->fifo_list[WRITE]) + && list_empty(&dd->fifo_list[READ]); } static struct request * @@ -733,7 +676,6 @@ static int deadline_init_queue(request_queue_t *q, elevator_t *e) INIT_LIST_HEAD(&dd->fifo_list[WRITE]); dd->sort_list[READ] = RB_ROOT; dd->sort_list[WRITE] = RB_ROOT; - dd->dispatch = &q->queue_head; dd->fifo_expire[READ] = read_expire; dd->fifo_expire[WRITE] = write_expire; dd->writes_starved = writes_starved; @@ -748,10 +690,8 @@ static void deadline_put_request(request_queue_t *q, struct request *rq) struct deadline_data *dd = q->elevator->elevator_data; struct deadline_rq *drq = RQ_DATA(rq); - if (drq) { - mempool_free(drq, dd->drq_pool); - rq->elevator_private = NULL; - } + mempool_free(drq, dd->drq_pool); + rq->elevator_private = NULL; } static int @@ -917,9 +857,8 @@ static struct elevator_type iosched_deadline = { .elevator_merge_fn = deadline_merge, .elevator_merged_fn = deadline_merged_request, .elevator_merge_req_fn = deadline_merged_requests, - .elevator_next_req_fn = deadline_next_request, - .elevator_add_req_fn = deadline_insert_request, - .elevator_remove_req_fn = deadline_remove_request, + .elevator_dispatch_fn = deadline_dispatch_requests, + .elevator_add_req_fn = deadline_add_request, .elevator_queue_empty_fn = deadline_queue_empty, .elevator_former_req_fn = deadline_former_request, .elevator_latter_req_fn = deadline_latter_request, diff --git a/drivers/block/noop-iosched.c b/drivers/block/noop-iosched.c index b1730b62c37e..bc2252b6f2e5 100644 --- a/drivers/block/noop-iosched.c +++ b/drivers/block/noop-iosched.c @@ -28,13 +28,9 @@ static void elevator_noop_merge_requests(request_queue_t *q, struct request *req list_del_init(&next->queuelist); } -static void elevator_noop_add_request(request_queue_t *q, struct request *rq, - int where) +static void elevator_noop_add_request(request_queue_t *q, struct request *rq) { - if (where == ELEVATOR_INSERT_FRONT) - list_add(&rq->queuelist, &q->queue_head); - else - list_add_tail(&rq->queuelist, &q->queue_head); + elv_dispatch_add_tail(q, rq); /* * new merges must not precede this barrier @@ -45,19 +41,16 @@ static void elevator_noop_add_request(request_queue_t *q, struct request *rq, q->last_merge = rq; } -static struct request *elevator_noop_next_request(request_queue_t *q) +static int elevator_noop_dispatch(request_queue_t *q, int force) { - if (!list_empty(&q->queue_head)) - return list_entry_rq(q->queue_head.next); - - return NULL; + return 0; } static struct elevator_type elevator_noop = { .ops = { .elevator_merge_fn = elevator_noop_merge, .elevator_merge_req_fn = elevator_noop_merge_requests, - .elevator_next_req_fn = elevator_noop_next_request, + .elevator_dispatch_fn = elevator_noop_dispatch, .elevator_add_req_fn = elevator_noop_add_request, }, .elevator_name = "noop", -- cgit v1.2.3 From 06b86245c052963029bfd9020ca1f08ceb66f85a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:46:23 +0200 Subject: [PATCH] 03/05 move last_merge handlin into generic elevator code Currently, both generic elevator code and specific ioscheds participate in the management and usage of last_merge. This and the following patches move last_merge handling into generic elevator code. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 43 ++++++++++++++++++------------------------- include/linux/blkdev.h | 3 +++ 2 files changed, 21 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 29d6c8237ab3..415144372c75 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -83,15 +83,6 @@ inline int elv_try_merge(struct request *__rq, struct bio *bio) } EXPORT_SYMBOL(elv_try_merge); -inline int elv_try_last_merge(request_queue_t *q, struct bio *bio) -{ - if (q->last_merge) - return elv_try_merge(q->last_merge, bio); - - return ELEVATOR_NO_MERGE; -} -EXPORT_SYMBOL(elv_try_last_merge); - static struct elevator_type *elevator_find(const char *name) { struct elevator_type *e = NULL; @@ -239,6 +230,9 @@ void elv_dispatch_sort(request_queue_t *q, struct request *rq) unsigned max_back; struct list_head *entry; + if (q->last_merge == rq) + q->last_merge = NULL; + boundary = q->end_sector; max_back = q->max_back_kb * 2; boundary = boundary > max_back ? boundary - max_back : 0; @@ -265,6 +259,15 @@ void elv_dispatch_sort(request_queue_t *q, struct request *rq) int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) { elevator_t *e = q->elevator; + int ret; + + if (q->last_merge) { + ret = elv_try_merge(q->last_merge, bio); + if (ret != ELEVATOR_NO_MERGE) { + *req = q->last_merge; + return ret; + } + } if (e->ops->elevator_merge_fn) return e->ops->elevator_merge_fn(q, req, bio); @@ -278,6 +281,8 @@ void elv_merged_request(request_queue_t *q, struct request *rq) if (e->ops->elevator_merged_fn) e->ops->elevator_merged_fn(q, rq); + + q->last_merge = rq; } void elv_merge_requests(request_queue_t *q, struct request *rq, @@ -285,11 +290,10 @@ void elv_merge_requests(request_queue_t *q, struct request *rq, { elevator_t *e = q->elevator; - if (q->last_merge == next) - q->last_merge = NULL; - if (e->ops->elevator_merge_req_fn) e->ops->elevator_merge_req_fn(q, rq, next); + + q->last_merge = rq; } void elv_requeue_request(request_queue_t *q, struct request *rq) @@ -384,6 +388,8 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, BUG_ON(!blk_fs_request(rq)); rq->flags |= REQ_SORTED; q->elevator->ops->elevator_add_req_fn(q, rq); + if (q->last_merge == NULL && rq_mergeable(rq)) + q->last_merge = rq; break; default: @@ -462,9 +468,6 @@ struct request *elv_next_request(request_queue_t *q) rq->flags |= REQ_STARTED; } - if (rq == q->last_merge) - q->last_merge = NULL; - if (!q->boundary_rq || q->boundary_rq == rq) { q->end_sector = rq_end_sector(rq); q->boundary_rq = NULL; @@ -518,16 +521,6 @@ void elv_dequeue_request(request_queue_t *q, struct request *rq) */ if (blk_account_rq(rq)) q->in_flight++; - - /* - * the main clearing point for q->last_merge is on retrieval of - * request by driver (it calls elv_next_request()), but it _can_ - * also happen here if a request is added to the queue but later - * deleted without ever being given to driver (merged with another - * request). - */ - if (rq == q->last_merge) - q->last_merge = NULL; } int elv_queue_empty(request_queue_t *q) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a2e496f285a4..bd55b1df8997 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -630,6 +630,9 @@ static inline void blkdev_dequeue_request(struct request *req) static inline void elv_dispatch_add_tail(struct request_queue *q, struct request *rq) { + if (q->last_merge == rq) + q->last_merge = NULL; + q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; list_add_tail(&rq->queuelist, &q->queue_head); -- cgit v1.2.3 From 98b11471d72a374f346bec50a00d0887719b85b3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:46:54 +0200 Subject: [PATCH] 04/05 remove last_merge handling from ioscheds Remove last_merge handling from all ioscheds. This patch removes merging capability of noop iosched. Signed-off-by: Tejun Heo --- drivers/block/as-iosched.c | 35 ++++------------------------------- drivers/block/cfq-iosched.c | 26 ++------------------------ drivers/block/deadline-iosched.c | 30 ++---------------------------- drivers/block/noop-iosched.c | 31 ------------------------------- 4 files changed, 8 insertions(+), 114 deletions(-) (limited to 'drivers') diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 1775ffe9edc7..5d20e4bcbc78 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -279,14 +279,6 @@ static inline void as_del_arq_hash(struct as_rq *arq) __as_del_arq_hash(arq); } -static void as_remove_merge_hints(request_queue_t *q, struct as_rq *arq) -{ - as_del_arq_hash(arq); - - if (q->last_merge == arq->request) - q->last_merge = NULL; -} - static void as_add_arq_hash(struct as_data *ad, struct as_rq *arq) { struct request *rq = arq->request; @@ -330,7 +322,7 @@ static struct request *as_find_arq_hash(struct as_data *ad, sector_t offset) BUG_ON(!arq->on_hash); if (!rq_mergeable(__rq)) { - as_remove_merge_hints(ad->q, arq); + as_del_arq_hash(arq); continue; } @@ -1040,7 +1032,7 @@ static void as_remove_queued_request(request_queue_t *q, struct request *rq) ad->next_arq[data_dir] = as_find_next_arq(ad, arq); list_del_init(&arq->fifo); - as_remove_merge_hints(q, arq); + as_del_arq_hash(arq); as_del_arq_rb(ad, arq); } @@ -1351,7 +1343,7 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia /* * Don't want to have to handle merges. */ - as_remove_merge_hints(ad->q, arq); + as_del_arq_hash(arq); } /* @@ -1392,12 +1384,8 @@ static void as_add_request(request_queue_t *q, struct request *rq) arq->expires = jiffies + ad->fifo_expire[data_dir]; list_add_tail(&arq->fifo, &ad->fifo_list[data_dir]); - if (rq_mergeable(arq->request)) { + if (rq_mergeable(arq->request)) as_add_arq_hash(ad, arq); - - if (!ad->q->last_merge) - ad->q->last_merge = arq->request; - } as_update_arq(ad, arq); /* keep state machine up to date */ } else { @@ -1486,15 +1474,6 @@ as_merge(request_queue_t *q, struct request **req, struct bio *bio) struct request *__rq; int ret; - /* - * try last_merge to avoid going to hash - */ - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) { - __rq = q->last_merge; - goto out_insert; - } - /* * see if the merge hash can satisfy a back merge */ @@ -1523,9 +1502,6 @@ as_merge(request_queue_t *q, struct request **req, struct bio *bio) return ELEVATOR_NO_MERGE; out: - if (rq_mergeable(__rq)) - q->last_merge = __rq; -out_insert: if (ret) { if (rq_mergeable(__rq)) as_hot_arq_hash(ad, RQ_DATA(__rq)); @@ -1572,9 +1548,6 @@ static void as_merged_request(request_queue_t *q, struct request *req) * behind the disk head. We currently don't bother adjusting. */ } - - if (arq->on_hash) - q->last_merge = req; } static void diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index 7b14160e0798..62a19ed0443b 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -304,14 +304,6 @@ static inline void cfq_del_crq_hash(struct cfq_rq *crq) hlist_del_init(&crq->hash); } -static void cfq_remove_merge_hints(request_queue_t *q, struct cfq_rq *crq) -{ - cfq_del_crq_hash(crq); - - if (q->last_merge == crq->request) - q->last_merge = NULL; -} - static inline void cfq_add_crq_hash(struct cfq_data *cfqd, struct cfq_rq *crq) { const int hash_idx = CFQ_MHASH_FN(rq_hash_key(crq->request)); @@ -672,7 +664,7 @@ static void cfq_remove_request(struct request *rq) list_del_init(&rq->queuelist); cfq_del_crq_rb(crq); - cfq_remove_merge_hints(rq->q, crq); + cfq_del_crq_hash(crq); } static int @@ -682,12 +674,6 @@ cfq_merge(request_queue_t *q, struct request **req, struct bio *bio) struct request *__rq; int ret; - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) { - __rq = q->last_merge; - goto out_insert; - } - __rq = cfq_find_rq_hash(cfqd, bio->bi_sector); if (__rq && elv_rq_merge_ok(__rq, bio)) { ret = ELEVATOR_BACK_MERGE; @@ -702,8 +688,6 @@ cfq_merge(request_queue_t *q, struct request **req, struct bio *bio) return ELEVATOR_NO_MERGE; out: - q->last_merge = __rq; -out_insert: *req = __rq; return ret; } @@ -722,8 +706,6 @@ static void cfq_merged_request(request_queue_t *q, struct request *req) cfq_update_next_crq(crq); cfq_reposition_crq_rb(cfqq, crq); } - - q->last_merge = req; } static void @@ -1670,13 +1652,9 @@ static void cfq_insert_request(request_queue_t *q, struct request *rq) list_add_tail(&rq->queuelist, &cfqq->fifo); - if (rq_mergeable(rq)) { + if (rq_mergeable(rq)) cfq_add_crq_hash(cfqd, crq); - if (!cfqd->queue->last_merge) - cfqd->queue->last_merge = rq; - } - cfq_crq_enqueued(cfqd, cfqq, crq); } diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c index 07de4d24ddba..43d93155efb8 100644 --- a/drivers/block/deadline-iosched.c +++ b/drivers/block/deadline-iosched.c @@ -112,15 +112,6 @@ static inline void deadline_del_drq_hash(struct deadline_rq *drq) __deadline_del_drq_hash(drq); } -static void -deadline_remove_merge_hints(request_queue_t *q, struct deadline_rq *drq) -{ - deadline_del_drq_hash(drq); - - if (q->last_merge == drq->request) - q->last_merge = NULL; -} - static inline void deadline_add_drq_hash(struct deadline_data *dd, struct deadline_rq *drq) { @@ -299,12 +290,8 @@ deadline_add_request(struct request_queue *q, struct request *rq) drq->expires = jiffies + dd->fifo_expire[data_dir]; list_add_tail(&drq->fifo, &dd->fifo_list[data_dir]); - if (rq_mergeable(rq)) { + if (rq_mergeable(rq)) deadline_add_drq_hash(dd, drq); - - if (!q->last_merge) - q->last_merge = rq; - } } /* @@ -316,8 +303,8 @@ static void deadline_remove_request(request_queue_t *q, struct request *rq) struct deadline_data *dd = q->elevator->elevator_data; list_del_init(&drq->fifo); - deadline_remove_merge_hints(q, drq); deadline_del_drq_rb(dd, drq); + deadline_del_drq_hash(drq); } static int @@ -327,15 +314,6 @@ deadline_merge(request_queue_t *q, struct request **req, struct bio *bio) struct request *__rq; int ret; - /* - * try last_merge to avoid going to hash - */ - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) { - __rq = q->last_merge; - goto out_insert; - } - /* * see if the merge hash can satisfy a back merge */ @@ -368,8 +346,6 @@ deadline_merge(request_queue_t *q, struct request **req, struct bio *bio) return ELEVATOR_NO_MERGE; out: - q->last_merge = __rq; -out_insert: if (ret) deadline_hot_drq_hash(dd, RQ_DATA(__rq)); *req = __rq; @@ -394,8 +370,6 @@ static void deadline_merged_request(request_queue_t *q, struct request *req) deadline_del_drq_rb(dd, drq); deadline_add_drq_rb(dd, drq); } - - q->last_merge = req; } static void diff --git a/drivers/block/noop-iosched.c b/drivers/block/noop-iosched.c index bc2252b6f2e5..f56b8edb06e4 100644 --- a/drivers/block/noop-iosched.c +++ b/drivers/block/noop-iosched.c @@ -7,38 +7,9 @@ #include #include -/* - * See if we can find a request that this buffer can be coalesced with. - */ -static int elevator_noop_merge(request_queue_t *q, struct request **req, - struct bio *bio) -{ - int ret; - - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) - *req = q->last_merge; - - return ret; -} - -static void elevator_noop_merge_requests(request_queue_t *q, struct request *req, - struct request *next) -{ - list_del_init(&next->queuelist); -} - static void elevator_noop_add_request(request_queue_t *q, struct request *rq) { elv_dispatch_add_tail(q, rq); - - /* - * new merges must not precede this barrier - */ - if (rq->flags & REQ_HARDBARRIER) - q->last_merge = NULL; - else if (!q->last_merge) - q->last_merge = rq; } static int elevator_noop_dispatch(request_queue_t *q, int force) @@ -48,8 +19,6 @@ static int elevator_noop_dispatch(request_queue_t *q, int force) static struct elevator_type elevator_noop = { .ops = { - .elevator_merge_fn = elevator_noop_merge, - .elevator_merge_req_fn = elevator_noop_merge_requests, .elevator_dispatch_fn = elevator_noop_dispatch, .elevator_add_req_fn = elevator_noop_add_request, }, -- cgit v1.2.3 From cb19833dccb32f97cacbfff834b53523915f13f6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Oct 2005 08:35:58 +0200 Subject: [BLOCK] kill generic max_back_kb handling This patch kills max_back_kb handling from elv_dispatch_sort() and kills max_back_kb field from struct request_queue. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 6 +----- include/linux/blkdev.h | 1 - 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 415144372c75..af2388e73f61 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -136,7 +136,6 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, q->elevator = eq; q->end_sector = 0; q->boundary_rq = NULL; - q->max_back_kb = 0; if (eq->ops->elevator_init_fn) ret = eq->ops->elevator_init_fn(q, eq); @@ -227,16 +226,13 @@ void elevator_exit(elevator_t *e) void elv_dispatch_sort(request_queue_t *q, struct request *rq) { sector_t boundary; - unsigned max_back; struct list_head *entry; if (q->last_merge == rq) q->last_merge = NULL; boundary = q->end_sector; - max_back = q->max_back_kb * 2; - boundary = boundary > max_back ? boundary - max_back : 0; - + list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bd55b1df8997..159dbcd2eb59 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -339,7 +339,6 @@ struct request_queue */ sector_t end_sector; struct request *boundary_rq; - unsigned int max_back_kb; /* * Auto-unplugging state -- cgit v1.2.3 From cb98fc8bb9c141009e2bda99c0db39d387e142cf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 28 Oct 2005 08:29:39 +0200 Subject: [BLOCK] Reimplement elevator switch This patch reimplements elevator switch. This patch assumes generic dispatch queue patchset is applied. * Each request is tagged with REQ_ELVPRIV flag if it has its elevator private data set. * Requests which doesn't have REQ_ELVPRIV flag set never enter iosched. They are always directly back inserted to dispatch queue. Of course, elevator_put_req_fn is called only for requests which have its REQ_ELVPRIV set. * Request queue maintains the current number of requests which have its elevator data set (elevator_set_req_fn called) in q->rq->elvpriv. * If a request queue has QUEUE_FLAG_BYPASS set, elevator private data is not allocated for new requests. To switch to another iosched, we set QUEUE_FLAG_BYPASS and wait until elvpriv goes to zero; then, we attach the new iosched and clears QUEUE_FLAG_BYPASS. New implementation is much simpler and main code paths are less cluttered, IMHO. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 78 ++++++++++++------------- drivers/block/ll_rw_blk.c | 142 +++++++++------------------------------------- include/linux/blkdev.h | 10 ++-- 3 files changed, 66 insertions(+), 164 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index af2388e73f61..272d93946621 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -34,6 +34,7 @@ #include #include #include +#include #include @@ -131,11 +132,7 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, eq->ops = &e->ops; eq->elevator_type = e; - INIT_LIST_HEAD(&q->queue_head); - q->last_merge = NULL; q->elevator = eq; - q->end_sector = 0; - q->boundary_rq = NULL; if (eq->ops->elevator_init_fn) ret = eq->ops->elevator_init_fn(q, eq); @@ -184,6 +181,12 @@ int elevator_init(request_queue_t *q, char *name) struct elevator_queue *eq; int ret = 0; + INIT_LIST_HEAD(&q->queue_head); + q->last_merge = NULL; + q->end_sector = 0; + q->boundary_rq = NULL; + q->max_back_kb = 0; + elevator_setup_default(); if (!name) @@ -336,23 +339,14 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; } - } + } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT) + where = ELEVATOR_INSERT_BACK; if (plug) blk_plug_device(q); rq->q = q; - if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) { - /* - * if drain is set, store the request "locally". when the drain - * is finished, the requests will be handed ordered to the io - * scheduler - */ - list_add_tail(&rq->queuelist, &q->drain_list); - return; - } - switch (where) { case ELEVATOR_INSERT_FRONT: rq->flags |= REQ_SOFTBARRIER; @@ -659,25 +653,36 @@ EXPORT_SYMBOL_GPL(elv_unregister); * switch to new_e io scheduler. be careful not to introduce deadlocks - * we don't free the old io scheduler, before we have allocated what we * need for the new one. this way we have a chance of going back to the old - * one, if the new one fails init for some reason. we also do an intermediate - * switch to noop to ensure safety with stack-allocated requests, since they - * don't originate from the block layer allocator. noop is safe here, because - * it never needs to touch the elevator itself for completion events. DRAIN - * flags will make sure we don't touch it for additions either. + * one, if the new one fails init for some reason. */ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) { - elevator_t *e = kmalloc(sizeof(elevator_t), GFP_KERNEL); - struct elevator_type *noop_elevator = NULL; - elevator_t *old_elevator; + elevator_t *old_elevator, *e; + /* + * Allocate new elevator + */ + e = kmalloc(sizeof(elevator_t), GFP_KERNEL); if (!e) goto error; /* - * first step, drain requests from the block freelist + * Turn on BYPASS and drain all requests w/ elevator private data */ - blk_wait_queue_drained(q, 0); + spin_lock_irq(q->queue_lock); + + set_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + + while (q->elevator->ops->elevator_dispatch_fn(q, 1)) + ; + + while (q->rq.elvpriv) { + spin_unlock_irq(q->queue_lock); + msleep(100); + spin_lock_irq(q->queue_lock); + } + + spin_unlock_irq(q->queue_lock); /* * unregister old elevator data @@ -685,18 +690,6 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) elv_unregister_queue(q); old_elevator = q->elevator; - /* - * next step, switch to noop since it uses no private rq structures - * and doesn't allocate any memory for anything. then wait for any - * non-fs requests in-flight - */ - noop_elevator = elevator_get("noop"); - spin_lock_irq(q->queue_lock); - elevator_attach(q, noop_elevator, e); - spin_unlock_irq(q->queue_lock); - - blk_wait_queue_drained(q, 1); - /* * attach and start new elevator */ @@ -707,11 +700,10 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) goto fail_register; /* - * finally exit old elevator and start queue again + * finally exit old elevator and turn off BYPASS. */ elevator_exit(old_elevator); - blk_finish_queue_drain(q); - elevator_put(noop_elevator); + clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); return; fail_register: @@ -720,13 +712,13 @@ fail_register: * one again (along with re-adding the sysfs dir) */ elevator_exit(e); + e = NULL; fail: q->elevator = old_elevator; elv_register_queue(q); - blk_finish_queue_drain(q); + clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + kfree(e); error: - if (noop_elevator) - elevator_put(noop_elevator); elevator_put(new_e); printk(KERN_ERR "elevator: switch to %s failed\n",new_e->elevator_name); } diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index d2a66fd309c3..f7c9931cb380 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -263,8 +263,6 @@ void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn) blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); blk_queue_activity_fn(q, NULL, NULL); - - INIT_LIST_HEAD(&q->drain_list); } EXPORT_SYMBOL(blk_queue_make_request); @@ -1050,6 +1048,7 @@ static char *rq_flags[] = { "REQ_STARTED", "REQ_DONTPREP", "REQ_QUEUED", + "REQ_ELVPRIV", "REQ_PC", "REQ_BLOCK_PC", "REQ_SENSE", @@ -1640,9 +1639,9 @@ static int blk_init_free_list(request_queue_t *q) rl->count[READ] = rl->count[WRITE] = 0; rl->starved[READ] = rl->starved[WRITE] = 0; + rl->elvpriv = 0; init_waitqueue_head(&rl->wait[READ]); init_waitqueue_head(&rl->wait[WRITE]); - init_waitqueue_head(&rl->drain); rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab, mempool_free_slab, request_cachep, q->node); @@ -1785,12 +1784,14 @@ EXPORT_SYMBOL(blk_get_queue); static inline void blk_free_request(request_queue_t *q, struct request *rq) { - elv_put_request(q, rq); + if (rq->flags & REQ_ELVPRIV) + elv_put_request(q, rq); mempool_free(rq, q->rq.rq_pool); } static inline struct request * -blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask) +blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, + int priv, int gfp_mask) { struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask); @@ -1803,11 +1804,15 @@ blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask) */ rq->flags = rw; - if (!elv_set_request(q, rq, bio, gfp_mask)) - return rq; + if (priv) { + if (unlikely(elv_set_request(q, rq, bio, gfp_mask))) { + mempool_free(rq, q->rq.rq_pool); + return NULL; + } + rq->flags |= REQ_ELVPRIV; + } - mempool_free(rq, q->rq.rq_pool); - return NULL; + return rq; } /* @@ -1863,22 +1868,18 @@ static void __freed_request(request_queue_t *q, int rw) * A request has just been released. Account for it, update the full and * congestion status, wake up any waiters. Called under q->queue_lock. */ -static void freed_request(request_queue_t *q, int rw) +static void freed_request(request_queue_t *q, int rw, int priv) { struct request_list *rl = &q->rq; rl->count[rw]--; + if (priv) + rl->elvpriv--; __freed_request(q, rw); if (unlikely(rl->starved[rw ^ 1])) __freed_request(q, rw ^ 1); - - if (!rl->count[READ] && !rl->count[WRITE]) { - smp_mb(); - if (unlikely(waitqueue_active(&rl->drain))) - wake_up(&rl->drain); - } } #define blkdev_free_rq(list) list_entry((list)->next, struct request, queuelist) @@ -1893,9 +1894,7 @@ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, struct request *rq = NULL; struct request_list *rl = &q->rq; struct io_context *ioc = current_io_context(GFP_ATOMIC); - - if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) - goto out; + int priv; if (rl->count[rw]+1 >= q->nr_requests) { /* @@ -1940,9 +1939,14 @@ get_rq: rl->starved[rw] = 0; if (rl->count[rw] >= queue_congestion_on_threshold(q)) set_queue_congested(q, rw); + + priv = !test_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + if (priv) + rl->elvpriv++; + spin_unlock_irq(q->queue_lock); - rq = blk_alloc_request(q, rw, bio, gfp_mask); + rq = blk_alloc_request(q, rw, bio, priv, gfp_mask); if (!rq) { /* * Allocation failed presumably due to memory. Undo anything @@ -1952,7 +1956,7 @@ get_rq: * wait queue, but this is pretty rare. */ spin_lock_irq(q->queue_lock); - freed_request(q, rw); + freed_request(q, rw, priv); /* * in the very unlikely event that allocation failed and no @@ -2470,11 +2474,12 @@ static void __blk_put_request(request_queue_t *q, struct request *req) */ if (rl) { int rw = rq_data_dir(req); + int priv = req->flags & REQ_ELVPRIV; BUG_ON(!list_empty(&req->queuelist)); blk_free_request(q, req); - freed_request(q, rw); + freed_request(q, rw, priv); } } @@ -2802,97 +2807,6 @@ static inline void blk_partition_remap(struct bio *bio) } } -void blk_finish_queue_drain(request_queue_t *q) -{ - struct request_list *rl = &q->rq; - struct request *rq; - int requeued = 0; - - spin_lock_irq(q->queue_lock); - clear_bit(QUEUE_FLAG_DRAIN, &q->queue_flags); - - while (!list_empty(&q->drain_list)) { - rq = list_entry_rq(q->drain_list.next); - - list_del_init(&rq->queuelist); - elv_requeue_request(q, rq); - requeued++; - } - - if (requeued) - q->request_fn(q); - - spin_unlock_irq(q->queue_lock); - - wake_up(&rl->wait[0]); - wake_up(&rl->wait[1]); - wake_up(&rl->drain); -} - -static int wait_drain(request_queue_t *q, struct request_list *rl, int dispatch) -{ - int wait = rl->count[READ] + rl->count[WRITE]; - - if (dispatch) - wait += !list_empty(&q->queue_head); - - return wait; -} - -/* - * We rely on the fact that only requests allocated through blk_alloc_request() - * have io scheduler private data structures associated with them. Any other - * type of request (allocated on stack or through kmalloc()) should not go - * to the io scheduler core, but be attached to the queue head instead. - */ -void blk_wait_queue_drained(request_queue_t *q, int wait_dispatch) -{ - struct request_list *rl = &q->rq; - DEFINE_WAIT(wait); - - spin_lock_irq(q->queue_lock); - set_bit(QUEUE_FLAG_DRAIN, &q->queue_flags); - - while (wait_drain(q, rl, wait_dispatch)) { - prepare_to_wait(&rl->drain, &wait, TASK_UNINTERRUPTIBLE); - - if (wait_drain(q, rl, wait_dispatch)) { - __generic_unplug_device(q); - spin_unlock_irq(q->queue_lock); - io_schedule(); - spin_lock_irq(q->queue_lock); - } - - finish_wait(&rl->drain, &wait); - } - - spin_unlock_irq(q->queue_lock); -} - -/* - * block waiting for the io scheduler being started again. - */ -static inline void block_wait_queue_running(request_queue_t *q) -{ - DEFINE_WAIT(wait); - - while (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) { - struct request_list *rl = &q->rq; - - prepare_to_wait_exclusive(&rl->drain, &wait, - TASK_UNINTERRUPTIBLE); - - /* - * re-check the condition. avoids using prepare_to_wait() - * in the fast path (queue is running) - */ - if (test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)) - io_schedule(); - - finish_wait(&rl->drain, &wait); - } -} - static void handle_bad_sector(struct bio *bio) { char b[BDEVNAME_SIZE]; @@ -2988,8 +2902,6 @@ end_io: if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) goto end_io; - block_wait_queue_running(q); - /* * If this device has partitions, remap block n * of partition p to block n+start(p) of the disk. diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 159dbcd2eb59..6186d5e2110f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -107,9 +107,9 @@ typedef void (rq_end_io_fn)(struct request *); struct request_list { int count[2]; int starved[2]; + int elvpriv; mempool_t *rq_pool; wait_queue_head_t wait[2]; - wait_queue_head_t drain; }; #define BLK_MAX_CDB 16 @@ -211,6 +211,7 @@ enum rq_flag_bits { __REQ_STARTED, /* drive already may have started this one */ __REQ_DONTPREP, /* don't call prep for this one */ __REQ_QUEUED, /* uses queueing */ + __REQ_ELVPRIV, /* elevator private data attached */ /* * for ATA/ATAPI devices */ @@ -244,6 +245,7 @@ enum rq_flag_bits { #define REQ_STARTED (1 << __REQ_STARTED) #define REQ_DONTPREP (1 << __REQ_DONTPREP) #define REQ_QUEUED (1 << __REQ_QUEUED) +#define REQ_ELVPRIV (1 << __REQ_ELVPRIV) #define REQ_PC (1 << __REQ_PC) #define REQ_BLOCK_PC (1 << __REQ_BLOCK_PC) #define REQ_SENSE (1 << __REQ_SENSE) @@ -413,8 +415,6 @@ struct request_queue unsigned int sg_reserved_size; int node; - struct list_head drain_list; - /* * reserved for flush operations */ @@ -442,7 +442,7 @@ enum { #define QUEUE_FLAG_DEAD 5 /* queue being torn down */ #define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */ #define QUEUE_FLAG_PLUGGED 7 /* queue is plugged */ -#define QUEUE_FLAG_DRAIN 8 /* draining queue for sched switch */ +#define QUEUE_FLAG_BYPASS 8 /* don't use elevator, just do FIFO */ #define QUEUE_FLAG_FLUSH 9 /* doing barrier flush sequence */ #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) @@ -668,8 +668,6 @@ extern void blk_dump_rq_flags(struct request *, char *); extern void generic_unplug_device(request_queue_t *); extern void __generic_unplug_device(request_queue_t *); extern long nr_blockdev_pages(void); -extern void blk_wait_queue_drained(request_queue_t *, int); -extern void blk_finish_queue_drain(request_queue_t *); int blk_get_queue(request_queue_t *); request_queue_t *blk_alloc_queue(int gfp_mask); -- cgit v1.2.3 From 64521d1a3ba7cc7fe4ab5640da83d88144f05340 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Oct 2005 08:30:39 +0200 Subject: [BLOCK] elevator switch fixes/cleanup - 100msec sleep is a little excessive, lots of requests can complete in that timeframe. Use 10msec instead. - Rename QUEUE_FLAG_BYPASS to QUEUE_FLAG_ELVSWITCH to indicate what is going on. Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 8 ++++---- drivers/block/ll_rw_blk.c | 2 +- include/linux/blkdev.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 272d93946621..cf9bedbb761b 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -671,14 +671,14 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) */ spin_lock_irq(q->queue_lock); - set_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + set_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); while (q->elevator->ops->elevator_dispatch_fn(q, 1)) ; while (q->rq.elvpriv) { spin_unlock_irq(q->queue_lock); - msleep(100); + msleep(10); spin_lock_irq(q->queue_lock); } @@ -703,7 +703,7 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) * finally exit old elevator and turn off BYPASS. */ elevator_exit(old_elevator); - clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); return; fail_register: @@ -716,7 +716,7 @@ fail_register: fail: q->elevator = old_elevator; elv_register_queue(q); - clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); kfree(e); error: elevator_put(new_e); diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index f7c9931cb380..fc12d019b19d 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -1940,7 +1940,7 @@ get_rq: if (rl->count[rw] >= queue_congestion_on_threshold(q)) set_queue_congested(q, rw); - priv = !test_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); if (priv) rl->elvpriv++; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6186d5e2110f..7d9d14d6d8f9 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -442,7 +442,7 @@ enum { #define QUEUE_FLAG_DEAD 5 /* queue being torn down */ #define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */ #define QUEUE_FLAG_PLUGGED 7 /* queue is plugged */ -#define QUEUE_FLAG_BYPASS 8 /* don't use elevator, just do FIFO */ +#define QUEUE_FLAG_ELVSWITCH 8 /* don't use elevator, just do FIFO */ #define QUEUE_FLAG_FLUSH 9 /* doing barrier flush sequence */ #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) -- cgit v1.2.3 From 772eca7825358f52cf208afd7ab8ce22722ce41a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Oct 2005 09:01:17 +0200 Subject: [BLOCK] Leftover reference to ->max_back_kb Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index cf9bedbb761b..8de77416bd2f 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -185,7 +185,6 @@ int elevator_init(request_queue_t *q, char *name) q->last_merge = NULL; q->end_sector = 0; q->boundary_rq = NULL; - q->max_back_kb = 0; elevator_setup_default(); -- cgit v1.2.3 From 766529fa2c95e2006ad4c4485c4cde0912d21f12 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 10:29:21 +0100 Subject: [ARM] 2/4: Remove asm/hardware.h from asm-arm/arch-ebsa110/io.h EBSA110 only requires hardware.h to be included for a couple of files. Move the include there. Signed-off-by: Russell King --- arch/arm/mach-ebsa110/io.c | 1 + drivers/net/arm/am79c961a.c | 1 + include/asm-arm/arch-ebsa110/io.h | 2 -- 3 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c index ef7eb5dc91bd..c648bfb676a1 100644 --- a/arch/arm/mach-ebsa110/io.c +++ b/arch/arm/mach-ebsa110/io.c @@ -24,6 +24,7 @@ #include #include +#include #include #include diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index c56d86d371a9..3d50e953faaa 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -29,6 +29,7 @@ #include #include +#include #include #define TX_BUFFERS 15 diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h index ecf433634246..68e04c0bb3f7 100644 --- a/include/asm-arm/arch-ebsa110/io.h +++ b/include/asm-arm/arch-ebsa110/io.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffff u8 __inb8(unsigned int port); -- cgit v1.2.3 From c6b8fdad144bbb915d124ffd95011ad55730bf9f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:05:16 +0100 Subject: [ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.h Signed-off-by: Russell King --- drivers/mmc/mmci.c | 1 + drivers/serial/amba-pl010.c | 1 + drivers/serial/amba-pl011.c | 1 + drivers/video/amba-clcd.c | 1 + include/asm-arm/arch-integrator/hardware.h | 9 --------- include/asm-arm/arch-integrator/io.h | 10 ++++++++-- include/asm-arm/arch-versatile/io.h | 2 -- sound/arm/aaci.c | 1 + 8 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 91c74843dc0d..1e6bdba26756 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 679e678c7e6a..ddd0307fece2 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -50,6 +50,7 @@ #include #include +#include #include #include diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 1ff629c74750..938d185841c9 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -50,6 +50,7 @@ #include #include +#include #include #include #include diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 321dbe91dc14..cde6fd8eb390 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -22,6 +22,7 @@ #include #include +#include #include #include diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h index be2716eeaa02..6f0947bc500d 100644 --- a/include/asm-arm/arch-integrator/hardware.h +++ b/include/asm-arm/arch-integrator/hardware.h @@ -33,15 +33,6 @@ #define IO_SIZE 0x0B000000 // How much? #define IO_START INTEGRATOR_HDR_BASE // PA of IO -/* - * Similar to above, but for PCI addresses (memory, IO, Config and the - * V3 chip itself). WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h index 1329a731160d..31f2deab51b0 100644 --- a/include/asm-arm/arch-integrator/io.h +++ b/include/asm-arm/arch-integrator/io.h @@ -20,10 +20,16 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffff +/* + * WARNING: this has to mirror definitions in platform.h + */ +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 +#define PCI_IO_VADDR 0xee000000 + #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) #define __mem_pci(a) (a) #define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h index c2eed7f04b78..47e904cf25c7 100644 --- a/include/asm-arm/arch-versatile/io.h +++ b/include/asm-arm/arch-versatile/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffffffff static inline void __iomem *__io(unsigned long addr) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index b2d5db20ec8c..559ead6367da 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -20,6 +20,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From 674c04538284736c4a44224c78cb784b2c972f98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:25:28 +0100 Subject: [ARM] 3/4: Remove asm/hardware.h from SA1100 io.h Signed-off-by: Russell King --- arch/arm/mm/ioremap.c | 1 + drivers/mtd/maps/sa1100-flash.c | 1 + include/asm-arm/arch-sa1100/hardware.h | 7 ------- include/asm-arm/arch-sa1100/io.h | 6 +++++- include/asm-arm/arch-sa1100/system.h | 1 + 5 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 7110e54182b1..6fb1258df1b5 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,6 +26,7 @@ #include #include +#include #include #include diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 8dcaa357b4bb..9133351ba483 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h index 19c3b1e186bb..28711aaa4968 100644 --- a/include/asm-arm/arch-sa1100/hardware.h +++ b/include/asm-arm/arch-sa1100/hardware.h @@ -21,13 +21,6 @@ #define UNCACHEABLE_ADDR 0xfa050000 -/* - * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for - * in*()/out*() macros to be usable for all cases. - */ -#define PCIO_BASE 0 - - /* * SA1100 internal I/O mappings * diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h index 9c8f588f35db..9d4fe6cf205b 100644 --- a/include/asm-arm/arch-sa1100/io.h +++ b/include/asm-arm/arch-sa1100/io.h @@ -18,7 +18,11 @@ * We don't actually have real ISA nor PCI buses, but there is so many * drivers out there that might just work if we fake them... */ -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} +#define __io(a) __io(a) #define __mem_pci(a) (a) #define __mem_isa(a) (a) diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h index 6f52118ba1a4..0f0612f79b2b 100644 --- a/include/asm-arm/arch-sa1100/system.h +++ b/include/asm-arm/arch-sa1100/system.h @@ -4,6 +4,7 @@ * Copyright (c) 1999 Nicolas Pitre */ #include +#include static inline void arch_idle(void) { -- cgit v1.2.3 From f339ab3d6c59f8f898c165384aa2b6a0ae5d4c1c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:29:43 +0100 Subject: [ARM] Fix sparse warnings Fix sparse warnings in arch/arm/kernel/module.c, arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c, and platform support files. Signed-off-by: Russell King --- arch/arm/kernel/module.c | 1 + arch/arm/mm/consistent.c | 6 +++--- drivers/pcmcia/sa1111_generic.c | 2 +- include/asm-arm/mach/arch.h | 6 +++--- 4 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 1a85cfdad5ac..6055e1427ba3 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -11,6 +11,7 @@ */ #include #include +#include #include #include #include diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 26356ce4da54..0f32de977f5e 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -75,7 +75,7 @@ static struct vm_region consistent_head = { }; static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, int gfp) +vm_region_alloc(struct vm_region *head, size_t size, unsigned int gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -133,8 +133,8 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad #endif static void * -__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp, - pgprot_t prot) +__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, + unsigned int gfp, pgprot_t prot) { struct page *page; struct vm_region *c; diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index bb90a1448a53..81ded52c8959 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -122,7 +122,7 @@ void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) static int pcmcia_probe(struct sa1111_dev *dev) { - char *base; + void __iomem *base; if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index 4fa95084a8c0..7273c6fd95b5 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -48,10 +48,10 @@ struct machine_desc { * Set of macros to define architecture features. This is built into * a table by the linker. */ -#define MACHINE_START(_type,_name) \ -const struct machine_desc __mach_desc_##_type \ +#define MACHINE_START(_type,_name) \ +static const struct machine_desc __mach_desc_##_type \ __attribute__((__section__(".arch.info.init"))) = { \ - .nr = MACH_TYPE_##_type, \ + .nr = MACH_TYPE_##_type, \ .name = _name, #define MACHINE_END \ -- cgit v1.2.3 From 63a4b52c9ddca944afc1b78aacbf641c650780d7 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 28 Oct 2005 15:26:42 +0100 Subject: [ARM] 3044/1: Fix sparse warnings about incompatible pointer types for register defined in pxa-regs.h Patch from Ian Campbell The sparse warning initially surfaced in sound/arm/pxa2xx-ac97.c because it was using u32 * variables to hold the unsigned long * register addresses. I submitted an ALSA patch for this http://thread.gmane.org/gmane.linux.alsa.devel/27804 issue and it was suggested that it might be preferable to change the register definitions to use u32. Most other subarches seem to use u32 for their register type, at least the ones which use a __REG macro (like the PXA) do. Nico indicated in the thread above that he wouldn't mind this patch. Changing the type required fixes for opposite warnings in the pxa2xx usb gadget code but that was the only new warning introduced on defconfig or lubbock, mainstone and our own PXA255 boards. Signed-off-by: Ian Campbell Signed-off-by: Russell King --- drivers/usb/gadget/pxa2xx_udc.c | 2 +- drivers/usb/gadget/pxa2xx_udc.h | 8 ++++---- include/asm-arm/arch-pxa/hardware.h | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 73f8c9404156..feae7c0c5dd9 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev) } static int -write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max) +write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max) { u8 *buf; unsigned length, count; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index a58f3e6e71f1..19a883f7d1b8 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -69,11 +69,11 @@ struct pxa2xx_ep { * UDDR = UDC Endpoint Data Register (the fifo) * DRCM = DMA Request Channel Map */ - volatile unsigned long *reg_udccs; - volatile unsigned long *reg_ubcr; - volatile unsigned long *reg_uddr; + volatile u32 *reg_udccs; + volatile u32 *reg_ubcr; + volatile u32 *reg_uddr; #ifdef USE_DMA - volatile unsigned long *reg_drcmr; + volatile u32 *reg_drcmr; #define drcmr(n) .reg_drcmr = & DRCMR ## n , #else #define drcmr(n) diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index cf35721cfa45..3e70bd95472c 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -44,12 +44,12 @@ #ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) +# define __REG(x) (*((volatile u32 *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ # define __REG2(x,y) \ - (*(volatile unsigned long *)((unsigned long)&__REG(x) + (y))) + (*(volatile u32 *)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) -- cgit v1.2.3 From 8267e268e0914ac9371d07f711fcf20cc572993c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:20:53 -0400 Subject: [PATCH] gfp_t: block layer core Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/block/as-iosched.c | 2 +- drivers/block/cfq-iosched.c | 8 ++++---- drivers/block/deadline-iosched.c | 2 +- drivers/block/elevator.c | 2 +- drivers/block/ll_rw_blk.c | 16 ++++++++-------- include/linux/blkdev.h | 14 +++++++------- include/linux/elevator.h | 4 ++-- 7 files changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 95c0a3690b0f..1f08e14697e9 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -1807,7 +1807,7 @@ static void as_put_request(request_queue_t *q, struct request *rq) } static int as_set_request(request_queue_t *q, struct request *rq, - struct bio *bio, int gfp_mask) + struct bio *bio, gfp_t gfp_mask) { struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq = mempool_alloc(ad->arq_pool, gfp_mask); diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index cd056e7e64ec..d3bfe8cfb039 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -1422,7 +1422,7 @@ static void cfq_exit_io_context(struct cfq_io_context *cic) } static struct cfq_io_context * -cfq_alloc_io_context(struct cfq_data *cfqd, int gfp_mask) +cfq_alloc_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) { struct cfq_io_context *cic = kmem_cache_alloc(cfq_ioc_pool, gfp_mask); @@ -1517,7 +1517,7 @@ static int cfq_ioc_set_ioprio(struct io_context *ioc, unsigned int ioprio) static struct cfq_queue * cfq_get_queue(struct cfq_data *cfqd, unsigned int key, unsigned short ioprio, - int gfp_mask) + gfp_t gfp_mask) { const int hashval = hash_long(key, CFQ_QHASH_SHIFT); struct cfq_queue *cfqq, *new_cfqq = NULL; @@ -1578,7 +1578,7 @@ out: * cfqq, so we don't need to worry about it disappearing */ static struct cfq_io_context * -cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, int gfp_mask) +cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, gfp_t gfp_mask) { struct io_context *ioc = NULL; struct cfq_io_context *cic; @@ -2075,7 +2075,7 @@ static void cfq_put_request(request_queue_t *q, struct request *rq) */ static int cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { struct cfq_data *cfqd = q->elevator->elevator_data; struct task_struct *tsk = current; diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c index 52a3ae5289a0..753546ba2262 100644 --- a/drivers/block/deadline-iosched.c +++ b/drivers/block/deadline-iosched.c @@ -756,7 +756,7 @@ static void deadline_put_request(request_queue_t *q, struct request *rq) static int deadline_set_request(request_queue_t *q, struct request *rq, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { struct deadline_data *dd = q->elevator->elevator_data; struct deadline_rq *drq; diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 98f0126a2deb..c744d2a13062 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -487,7 +487,7 @@ struct request *elv_former_request(request_queue_t *q, struct request *rq) } int elv_set_request(request_queue_t *q, struct request *rq, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { elevator_t *e = q->elevator; diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index baedac522945..0f64ee7d8d27 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -1652,13 +1652,13 @@ static int blk_init_free_list(request_queue_t *q) static int __make_request(request_queue_t *, struct bio *); -request_queue_t *blk_alloc_queue(int gfp_mask) +request_queue_t *blk_alloc_queue(gfp_t gfp_mask) { return blk_alloc_queue_node(gfp_mask, -1); } EXPORT_SYMBOL(blk_alloc_queue); -request_queue_t *blk_alloc_queue_node(int gfp_mask, int node_id) +request_queue_t *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) { request_queue_t *q; @@ -1787,7 +1787,7 @@ static inline void blk_free_request(request_queue_t *q, struct request *rq) } static inline struct request * -blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask) +blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, gfp_t gfp_mask) { struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask); @@ -1885,7 +1885,7 @@ static void freed_request(request_queue_t *q, int rw) * Returns !NULL on success, with queue_lock *not held*. */ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { struct request *rq = NULL; struct request_list *rl = &q->rq; @@ -2019,7 +2019,7 @@ static struct request *get_request_wait(request_queue_t *q, int rw, return rq; } -struct request *blk_get_request(request_queue_t *q, int rw, int gfp_mask) +struct request *blk_get_request(request_queue_t *q, int rw, gfp_t gfp_mask) { struct request *rq; @@ -2251,7 +2251,7 @@ EXPORT_SYMBOL(blk_rq_unmap_user); * @gfp_mask: memory allocation flags */ int blk_rq_map_kern(request_queue_t *q, struct request *rq, void *kbuf, - unsigned int len, unsigned int gfp_mask) + unsigned int len, gfp_t gfp_mask) { struct bio *bio; @@ -3393,7 +3393,7 @@ void exit_io_context(void) * but since the current task itself holds a reference, the context can be * used in general code, so long as it stays within `current` context. */ -struct io_context *current_io_context(int gfp_flags) +struct io_context *current_io_context(gfp_t gfp_flags) { struct task_struct *tsk = current; struct io_context *ret; @@ -3424,7 +3424,7 @@ EXPORT_SYMBOL(current_io_context); * * This is always called in the context of the task which submitted the I/O. */ -struct io_context *get_io_context(int gfp_flags) +struct io_context *get_io_context(gfp_t gfp_flags) { struct io_context *ret; ret = current_io_context(gfp_flags); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index efdc9b5bc05c..1afbdb2d752c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -96,8 +96,8 @@ struct io_context { void put_io_context(struct io_context *ioc); void exit_io_context(void); -struct io_context *current_io_context(int gfp_flags); -struct io_context *get_io_context(int gfp_flags); +struct io_context *current_io_context(gfp_t gfp_flags); +struct io_context *get_io_context(gfp_t gfp_flags); void copy_io_context(struct io_context **pdst, struct io_context **psrc); void swap_io_context(struct io_context **ioc1, struct io_context **ioc2); @@ -354,7 +354,7 @@ struct request_queue * queue needs bounce pages for pages above this limit */ unsigned long bounce_pfn; - unsigned int bounce_gfp; + gfp_t bounce_gfp; /* * various queue flags, see QUEUE_* below @@ -550,7 +550,7 @@ extern void generic_make_request(struct bio *bio); extern void blk_put_request(struct request *); extern void blk_end_sync_rq(struct request *rq); extern void blk_attempt_remerge(request_queue_t *, struct request *); -extern struct request *blk_get_request(request_queue_t *, int, int); +extern struct request *blk_get_request(request_queue_t *, int, gfp_t); extern void blk_insert_request(request_queue_t *, struct request *, int, void *); extern void blk_requeue_request(request_queue_t *, struct request *); extern void blk_plug_device(request_queue_t *); @@ -565,7 +565,7 @@ extern void blk_run_queue(request_queue_t *); extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *); extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned int); extern int blk_rq_unmap_user(struct bio *, unsigned int); -extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, unsigned int); +extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t); extern int blk_rq_map_user_iov(request_queue_t *, struct request *, struct sg_iovec *, int); extern int blk_execute_rq(request_queue_t *, struct gendisk *, struct request *, int); @@ -654,8 +654,8 @@ extern void blk_wait_queue_drained(request_queue_t *, int); extern void blk_finish_queue_drain(request_queue_t *); int blk_get_queue(request_queue_t *); -request_queue_t *blk_alloc_queue(int gfp_mask); -request_queue_t *blk_alloc_queue_node(int,int); +request_queue_t *blk_alloc_queue(gfp_t); +request_queue_t *blk_alloc_queue_node(gfp_t, int); #define blk_put_queue(q) blk_cleanup_queue((q)) /* diff --git a/include/linux/elevator.h b/include/linux/elevator.h index ea6bbc2d7407..ed93125c1db5 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -18,7 +18,7 @@ typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct re typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *); typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *); -typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int); +typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, gfp_t); typedef void (elevator_put_req_fn) (request_queue_t *, struct request *); typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *); @@ -98,7 +98,7 @@ extern int elv_register_queue(request_queue_t *q); extern void elv_unregister_queue(request_queue_t *q); extern int elv_may_queue(request_queue_t *, int, struct bio *); extern void elv_completed_request(request_queue_t *, struct request *); -extern int elv_set_request(request_queue_t *, struct request *, struct bio *, int); +extern int elv_set_request(request_queue_t *, struct request *, struct bio *, gfp_t); extern void elv_put_request(request_queue_t *, struct request *); /* -- cgit v1.2.3 From 5c1fb41f40b7b6d819a617f52dbd66b6938ef362 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:28 -0400 Subject: [PATCH] gfp_t: dma-mapping (parisc) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/parisc/kernel/pci-dma.c | 6 +++--- drivers/parisc/ccio-dma.c | 2 +- drivers/parisc/sba_iommu.c | 2 +- include/asm-parisc/dma-mapping.h | 8 ++++---- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 368cc095c99f..844c2877a2e3 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -349,7 +349,7 @@ pcxl_dma_init(void) __initcall(pcxl_dma_init); -static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { unsigned long vaddr; unsigned long paddr; @@ -502,13 +502,13 @@ struct hppa_dma_ops pcxl_dma_ops = { }; static void *fail_alloc_consistent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { return NULL; } static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { void *addr = NULL; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 0e98a9d9834c..a3bd91a61827 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -836,7 +836,7 @@ ccio_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * This function implements the pci_alloc_consistent function. */ static void * -ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { void *ret; #if 0 diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 82ea68b55df4..bd8b3e5a5cd7 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -986,7 +986,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * See Documentation/DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, int gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h index 4db84f969e9e..74d4ac6f2151 100644 --- a/include/asm-parisc/dma-mapping.h +++ b/include/asm-parisc/dma-mapping.h @@ -9,8 +9,8 @@ /* See Documentation/DMA-mapping.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); - void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, int flag); - void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, int flag); + void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); + void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); void (*free_consistent)(struct device *dev, size_t size, void *vaddr, dma_addr_t iova); dma_addr_t (*map_single)(struct device *dev, void *addr, size_t size, enum dma_data_direction direction); void (*unmap_single)(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction direction); @@ -49,14 +49,14 @@ extern struct hppa_dma_ops *hppa_dma_ops; static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { return hppa_dma_ops->alloc_consistent(dev, size, dma_handle, flag); } static inline void * dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { return hppa_dma_ops->alloc_noncoherent(dev, size, dma_handle, flag); } -- cgit v1.2.3 From 55016f10e31bb15b85d8c500f979dfdceb37d548 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:58 -0400 Subject: [PATCH] gfp_t: drivers/usb Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/core/buffer.c | 2 +- drivers/usb/core/hcd.c | 2 +- drivers/usb/core/hcd.h | 8 ++++---- drivers/usb/core/message.c | 2 +- drivers/usb/core/urb.c | 4 ++-- drivers/usb/core/usb.c | 2 +- drivers/usb/gadget/dummy_hcd.c | 8 ++++---- drivers/usb/gadget/ether.c | 22 +++++++++++----------- drivers/usb/gadget/goku_udc.c | 6 +++--- drivers/usb/gadget/lh7a40x_udc.c | 12 ++++++------ drivers/usb/gadget/net2280.c | 6 +++--- drivers/usb/gadget/omap_udc.c | 6 +++--- drivers/usb/gadget/pxa2xx_udc.c | 6 +++--- drivers/usb/gadget/serial.c | 16 ++++++++-------- drivers/usb/gadget/zero.c | 8 ++++---- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ehci-mem.c | 6 +++--- drivers/usb/host/ehci-q.c | 6 +++--- drivers/usb/host/ehci-sched.c | 14 +++++++------- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-mem.c | 4 ++-- drivers/usb/host/sl811-hcd.c | 2 +- drivers/usb/host/uhci-q.c | 2 +- drivers/usb/misc/uss720.c | 6 +++--- drivers/usb/net/asix.c | 2 +- drivers/usb/net/gl620a.c | 2 +- drivers/usb/net/kaweth.c | 6 +++--- drivers/usb/net/net1080.c | 2 +- drivers/usb/net/rndis_host.c | 2 +- drivers/usb/net/usbnet.c | 2 +- drivers/usb/net/usbnet.h | 2 +- drivers/usb/net/zaurus.c | 2 +- drivers/usb/net/zd1201.c | 2 +- include/linux/usb.h | 8 ++++---- include/linux/usb_gadget.h | 12 ++++++------ sound/usb/usbmidi.c | 2 +- 37 files changed, 100 insertions(+), 100 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index fc15b4acc8af..57e800ac3cee 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -106,7 +106,7 @@ void hcd_buffer_destroy (struct usb_hcd *hcd) void *hcd_buffer_alloc ( struct usb_bus *bus, size_t size, - unsigned mem_flags, + gfp_t mem_flags, dma_addr_t *dma ) { diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1017a97a418b..ff19d64041b5 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1112,7 +1112,7 @@ static void urb_unlink (struct urb *urb) * expects usb_submit_urb() to have sanity checked and conditioned all * inputs in the urb */ -static int hcd_submit_urb (struct urb *urb, unsigned mem_flags) +static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags) { int status; struct usb_hcd *hcd = urb->dev->bus->hcpriv; diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index ac451fa7e4d2..1f1ed6211af8 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -142,12 +142,12 @@ struct hcd_timeout { /* timeouts we allocate */ struct usb_operations { int (*get_frame_number) (struct usb_device *usb_dev); - int (*submit_urb) (struct urb *urb, unsigned mem_flags); + int (*submit_urb) (struct urb *urb, gfp_t mem_flags); int (*unlink_urb) (struct urb *urb, int status); /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */ void *(*buffer_alloc)(struct usb_bus *bus, size_t size, - unsigned mem_flags, + gfp_t mem_flags, dma_addr_t *dma); void (*buffer_free)(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); @@ -200,7 +200,7 @@ struct hc_driver { int (*urb_enqueue) (struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags); + gfp_t mem_flags); int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb); /* hw synch, freeing endpoint resources that urb_dequeue can't */ @@ -247,7 +247,7 @@ int hcd_buffer_create (struct usb_hcd *hcd); void hcd_buffer_destroy (struct usb_hcd *hcd); void *hcd_buffer_alloc (struct usb_bus *bus, size_t size, - unsigned mem_flags, dma_addr_t *dma); + gfp_t mem_flags, dma_addr_t *dma); void hcd_buffer_free (struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index f1fb67fe22a8..f9a81e84dbdf 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -321,7 +321,7 @@ int usb_sg_init ( struct scatterlist *sg, int nents, size_t length, - unsigned mem_flags + gfp_t mem_flags ) { int i; diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c846fefb7386..b32898e0a27d 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -60,7 +60,7 @@ void usb_init_urb(struct urb *urb) * * The driver must call usb_free_urb() when it is finished with the urb. */ -struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags) +struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags) { struct urb *urb; @@ -224,7 +224,7 @@ struct urb * usb_get_urb(struct urb *urb) * GFP_NOIO, unless b) or c) apply * */ -int usb_submit_urb(struct urb *urb, unsigned mem_flags) +int usb_submit_urb(struct urb *urb, gfp_t mem_flags) { int pipe, temp, max; struct usb_device *dev; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 7d131509e419..4c57f3f649ed 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1147,7 +1147,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, void *usb_buffer_alloc ( struct usb_device *dev, size_t size, - unsigned mem_flags, + gfp_t mem_flags, dma_addr_t *dma ) { diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 583db7c38cf1..8d9d8ee89554 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -470,7 +470,7 @@ static int dummy_disable (struct usb_ep *_ep) } static struct usb_request * -dummy_alloc_request (struct usb_ep *_ep, unsigned mem_flags) +dummy_alloc_request (struct usb_ep *_ep, gfp_t mem_flags) { struct dummy_ep *ep; struct dummy_request *req; @@ -507,7 +507,7 @@ dummy_alloc_buffer ( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - unsigned mem_flags + gfp_t mem_flags ) { char *retval; struct dummy_ep *ep; @@ -541,7 +541,7 @@ fifo_complete (struct usb_ep *ep, struct usb_request *req) static int dummy_queue (struct usb_ep *_ep, struct usb_request *_req, - unsigned mem_flags) + gfp_t mem_flags) { struct dummy_ep *ep; struct dummy_request *req; @@ -999,7 +999,7 @@ static int dummy_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct dummy *dum; struct urbp *urbp; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 49459e33e952..f1024e804d5c 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -945,11 +945,11 @@ config_buf (enum usb_device_speed speed, /*-------------------------------------------------------------------------*/ -static void eth_start (struct eth_dev *dev, unsigned gfp_flags); -static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags); +static void eth_start (struct eth_dev *dev, gfp_t gfp_flags); +static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags); static int -set_ether_config (struct eth_dev *dev, unsigned gfp_flags) +set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -1081,7 +1081,7 @@ static void eth_reset_config (struct eth_dev *dev) * that returns config descriptors, and altsetting code. */ static int -eth_set_config (struct eth_dev *dev, unsigned number, unsigned gfp_flags) +eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -1598,7 +1598,7 @@ static void defer_kevent (struct eth_dev *dev, int flag) static void rx_complete (struct usb_ep *ep, struct usb_request *req); static int -rx_submit (struct eth_dev *dev, struct usb_request *req, unsigned gfp_flags) +rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) { struct sk_buff *skb; int retval = -ENOMEM; @@ -1724,7 +1724,7 @@ clean: } static int prealloc (struct list_head *list, struct usb_ep *ep, - unsigned n, unsigned gfp_flags) + unsigned n, gfp_t gfp_flags) { unsigned i; struct usb_request *req; @@ -1763,7 +1763,7 @@ extra: return 0; } -static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags) +static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags) { int status; @@ -1779,7 +1779,7 @@ fail: return status; } -static void rx_fill (struct eth_dev *dev, unsigned gfp_flags) +static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; unsigned long flags; @@ -1962,7 +1962,7 @@ drop: * normally just one notification will be queued. */ -static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, unsigned); +static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t); static void eth_req_free (struct usb_ep *ep, struct usb_request *req); static void @@ -2024,7 +2024,7 @@ static int rndis_control_ack (struct net_device *net) #endif /* RNDIS */ -static void eth_start (struct eth_dev *dev, unsigned gfp_flags) +static void eth_start (struct eth_dev *dev, gfp_t gfp_flags) { DEBUG (dev, "%s\n", __FUNCTION__); @@ -2092,7 +2092,7 @@ static int eth_stop (struct net_device *net) /*-------------------------------------------------------------------------*/ static struct usb_request * -eth_req_alloc (struct usb_ep *ep, unsigned size, unsigned gfp_flags) +eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags) { struct usb_request *req; diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index eaab26f4ed37..b0f3cd63e3b9 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -269,7 +269,7 @@ static int goku_ep_disable(struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -goku_alloc_request(struct usb_ep *_ep, unsigned gfp_flags) +goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) { struct goku_request *req; @@ -327,7 +327,7 @@ goku_free_request(struct usb_ep *_ep, struct usb_request *_req) */ static void * goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes, - dma_addr_t *dma, unsigned gfp_flags) + dma_addr_t *dma, gfp_t gfp_flags) { void *retval; struct goku_ep *ep; @@ -789,7 +789,7 @@ finished: /*-------------------------------------------------------------------------*/ static int -goku_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct goku_request *req; struct goku_ep *ep; diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 4842577789c9..012d1e5f1524 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -71,13 +71,13 @@ static char *state_names[] = { static int lh7a40x_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *); static int lh7a40x_ep_disable(struct usb_ep *ep); -static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, int); +static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t); static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *); static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *, - int); + gfp_t); static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t, unsigned); -static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, int); +static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t); static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *); static int lh7a40x_set_halt(struct usb_ep *ep, int); static int lh7a40x_fifo_status(struct usb_ep *ep); @@ -1106,7 +1106,7 @@ static int lh7a40x_ep_disable(struct usb_ep *_ep) } static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, - unsigned gfp_flags) + gfp_t gfp_flags) { struct lh7a40x_request *req; @@ -1134,7 +1134,7 @@ static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req) } static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes, - dma_addr_t * dma, unsigned gfp_flags) + dma_addr_t * dma, gfp_t gfp_flags) { char *retval; @@ -1158,7 +1158,7 @@ static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma, * NOTE: Sets INDEX register */ static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req, - unsigned gfp_flags) + gfp_t gfp_flags) { struct lh7a40x_request *req; struct lh7a40x_ep *ep; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 477fab2e74d1..c32e1f7476da 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -376,7 +376,7 @@ static int net2280_disable (struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -net2280_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) +net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) { struct net2280_ep *ep; struct net2280_request *req; @@ -463,7 +463,7 @@ net2280_alloc_buffer ( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - unsigned gfp_flags + gfp_t gfp_flags ) { void *retval; @@ -897,7 +897,7 @@ done (struct net2280_ep *ep, struct net2280_request *req, int status) /*-------------------------------------------------------------------------*/ static int -net2280_queue (struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct net2280_request *req; struct net2280_ep *ep; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index ff5533e69560..287c5900fb13 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -269,7 +269,7 @@ static int omap_ep_disable(struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -omap_alloc_request(struct usb_ep *ep, unsigned gfp_flags) +omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) { struct omap_req *req; @@ -298,7 +298,7 @@ omap_alloc_buffer( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - unsigned gfp_flags + gfp_t gfp_flags ) { void *retval; @@ -937,7 +937,7 @@ static void dma_channel_release(struct omap_ep *ep) /*-------------------------------------------------------------------------*/ static int -omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); struct omap_req *req = container_of(_req, struct omap_req, req); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 73f8c9404156..6e545393cfff 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -332,7 +332,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep) * pxa2xx_ep_alloc_request - allocate a request data structure */ static struct usb_request * -pxa2xx_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) +pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) { struct pxa2xx_request *req; @@ -367,7 +367,7 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) */ static void * pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, - dma_addr_t *dma, unsigned gfp_flags) + dma_addr_t *dma, gfp_t gfp_flags) { char *retval; @@ -874,7 +874,7 @@ done: /*-------------------------------------------------------------------------*/ static int -pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct pxa2xx_request *req; struct pxa2xx_ep *ep; diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index c925d9222f53..b35ac6d334f8 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -300,18 +300,18 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, u8 type, unsigned int index, int is_otg); static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, - unsigned kmalloc_flags); + gfp_t kmalloc_flags); static void gs_free_req(struct usb_ep *ep, struct usb_request *req); static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, - unsigned kmalloc_flags); + gfp_t kmalloc_flags); static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req); -static int gs_alloc_ports(struct gs_dev *dev, unsigned kmalloc_flags); +static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags); static void gs_free_ports(struct gs_dev *dev); /* circular buffer */ -static struct gs_buf *gs_buf_alloc(unsigned int size, unsigned kmalloc_flags); +static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags); static void gs_buf_free(struct gs_buf *gb); static void gs_buf_clear(struct gs_buf *gb); static unsigned int gs_buf_data_avail(struct gs_buf *gb); @@ -2091,7 +2091,7 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, * usb_request or NULL if there is an error. */ static struct usb_request * -gs_alloc_req(struct usb_ep *ep, unsigned int len, unsigned kmalloc_flags) +gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags) { struct usb_request *req; @@ -2132,7 +2132,7 @@ static void gs_free_req(struct usb_ep *ep, struct usb_request *req) * endpoint, buffer len, and kmalloc flags. */ static struct gs_req_entry * -gs_alloc_req_entry(struct usb_ep *ep, unsigned len, unsigned kmalloc_flags) +gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) { struct gs_req_entry *req; @@ -2173,7 +2173,7 @@ static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req) * * The device lock is normally held when calling this function. */ -static int gs_alloc_ports(struct gs_dev *dev, unsigned kmalloc_flags) +static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags) { int i; struct gs_port *port; @@ -2255,7 +2255,7 @@ static void gs_free_ports(struct gs_dev *dev) * * Allocate a circular buffer and all associated memory. */ -static struct gs_buf *gs_buf_alloc(unsigned int size, unsigned kmalloc_flags) +static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags) { struct gs_buf *gb; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 6890e773b2a2..ec9c424f1d97 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -612,7 +612,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) } static struct usb_request * -source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags) +source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) { struct usb_request *req; int status; @@ -640,7 +640,7 @@ source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags) } static int -set_source_sink_config (struct zero_dev *dev, unsigned gfp_flags) +set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_ep *ep; @@ -744,7 +744,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) } static int -set_loopback_config (struct zero_dev *dev, unsigned gfp_flags) +set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_ep *ep; @@ -845,7 +845,7 @@ static void zero_reset_config (struct zero_dev *dev) * by limiting configuration choices (like the pxa2xx). */ static int -zero_set_config (struct zero_dev *dev, unsigned number, unsigned gfp_flags) +zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b948ffd94f45..f5eb9e7b5b18 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -983,7 +983,7 @@ static int ehci_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); struct list_head qtd_list; diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 5c38ad869485..91c2ab43cbcc 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -45,7 +45,7 @@ static inline void ehci_qtd_init (struct ehci_qtd *qtd, dma_addr_t dma) INIT_LIST_HEAD (&qtd->qtd_list); } -static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, int flags) +static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, gfp_t flags) { struct ehci_qtd *qtd; dma_addr_t dma; @@ -79,7 +79,7 @@ static void qh_destroy (struct kref *kref) dma_pool_free (ehci->qh_pool, qh, qh->qh_dma); } -static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, int flags) +static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags) { struct ehci_qh *qh; dma_addr_t dma; @@ -161,7 +161,7 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci) } /* remember to add cleanup code (above) if you add anything here */ -static int ehci_mem_init (struct ehci_hcd *ehci, int flags) +static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) { int i; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 940d38ca7d91..5bb872c3496d 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -477,7 +477,7 @@ qh_urb_transaction ( struct ehci_hcd *ehci, struct urb *urb, struct list_head *head, - int flags + gfp_t flags ) { struct ehci_qtd *qtd, *qtd_prev; dma_addr_t buf; @@ -629,7 +629,7 @@ static struct ehci_qh * qh_make ( struct ehci_hcd *ehci, struct urb *urb, - int flags + gfp_t flags ) { struct ehci_qh *qh = ehci_qh_alloc (ehci, flags); u32 info1 = 0, info2 = 0; @@ -906,7 +906,7 @@ submit_async ( struct usb_host_endpoint *ep, struct urb *urb, struct list_head *qtd_list, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_qtd *qtd; int epnum; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index ccc7300baa6d..f0c8aa1ccd5d 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -589,7 +589,7 @@ static int intr_submit ( struct usb_host_endpoint *ep, struct urb *urb, struct list_head *qtd_list, - unsigned mem_flags + gfp_t mem_flags ) { unsigned epnum; unsigned long flags; @@ -634,7 +634,7 @@ done: /* ehci_iso_stream ops work with both ITD and SITD */ static struct ehci_iso_stream * -iso_stream_alloc (unsigned mem_flags) +iso_stream_alloc (gfp_t mem_flags) { struct ehci_iso_stream *stream; @@ -851,7 +851,7 @@ iso_stream_find (struct ehci_hcd *ehci, struct urb *urb) /* ehci_iso_sched ops can be ITD-only or SITD-only */ static struct ehci_iso_sched * -iso_sched_alloc (unsigned packets, unsigned mem_flags) +iso_sched_alloc (unsigned packets, gfp_t mem_flags) { struct ehci_iso_sched *iso_sched; int size = sizeof *iso_sched; @@ -924,7 +924,7 @@ itd_urb_transaction ( struct ehci_iso_stream *stream, struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_itd *itd; @@ -1418,7 +1418,7 @@ itd_complete ( /*-------------------------------------------------------------------------*/ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags) + gfp_t mem_flags) { int status = -EINVAL; unsigned long flags; @@ -1529,7 +1529,7 @@ sitd_urb_transaction ( struct ehci_iso_stream *stream, struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_sitd *sitd; @@ -1779,7 +1779,7 @@ sitd_complete ( static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags) + gfp_t mem_flags) { int status = -EINVAL; unsigned long flags; diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index e142056b0d2c..2548d94fcd72 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -694,7 +694,7 @@ static int balance(struct isp116x *isp116x, u16 period, u16 load) static int isp116x_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, - unsigned mem_flags) + gfp_t mem_flags) { struct isp116x *isp116x = hcd_to_isp116x(hcd); struct usb_device *udev = urb->dev; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 67c1aa5eb1c1..f8da8c7af7c6 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -180,7 +180,7 @@ static int ohci_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); struct ed *ed; diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index fd3c4d3714bd..9fb83dfb1eb4 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -84,7 +84,7 @@ dma_to_td (struct ohci_hcd *hc, dma_addr_t td_dma) /* TDs ... */ static struct td * -td_alloc (struct ohci_hcd *hc, unsigned mem_flags) +td_alloc (struct ohci_hcd *hc, gfp_t mem_flags) { dma_addr_t dma; struct td *td; @@ -118,7 +118,7 @@ td_free (struct ohci_hcd *hc, struct td *td) /* EDs ... */ static struct ed * -ed_alloc (struct ohci_hcd *hc, unsigned mem_flags) +ed_alloc (struct ohci_hcd *hc, gfp_t mem_flags) { dma_addr_t dma; struct ed *ed; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d42a15d10a46..cad858575cea 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -818,7 +818,7 @@ static int sl811h_urb_enqueue( struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct sl811 *sl811 = hcd_to_sl811(hcd); struct usb_device *udev = urb->dev; diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index ea0d168a8c67..4e0fbe2c1a9a 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1164,7 +1164,7 @@ static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb) static int uhci_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep, - struct urb *urb, unsigned mem_flags) + struct urb *urb, gfp_t mem_flags) { int ret; struct uhci_hcd *uhci = hcd_to_uhci(hcd); diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 03fb70ef2eb3..0592cb5e6c4d 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -137,7 +137,7 @@ static void async_complete(struct urb *urb, struct pt_regs *ptregs) static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv, __u8 request, __u8 requesttype, __u16 value, __u16 index, - unsigned int mem_flags) + gfp_t mem_flags) { struct usb_device *usbdev; struct uss720_async_request *rq; @@ -204,7 +204,7 @@ static unsigned int kill_all_async_requests_priv(struct parport_uss720_private * /* --------------------------------------------------------------------- */ -static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, unsigned int mem_flags) +static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, gfp_t mem_flags) { struct parport_uss720_private *priv; struct uss720_async_request *rq; @@ -238,7 +238,7 @@ static int get_1284_register(struct parport *pp, unsigned char reg, unsigned cha return -EIO; } -static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, unsigned int mem_flags) +static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, gfp_t mem_flags) { struct parport_uss720_private *priv; struct uss720_async_request *rq; diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 861f00a43750..252a34fbb42c 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -753,7 +753,7 @@ static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - unsigned flags) + gfp_t flags) { int padlen; int headroom = skb_headroom(skb); diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index c8763ae33c73..c0f263b202a6 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -301,7 +301,7 @@ static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff * -genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; int length = skb->len; diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index e04b0ce3611a..c82655d3d448 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -477,13 +477,13 @@ static int kaweth_reset(struct kaweth_device *kaweth) } static void kaweth_usb_receive(struct urb *, struct pt_regs *regs); -static int kaweth_resubmit_rx_urb(struct kaweth_device *, unsigned); +static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t); /**************************************************************** int_callback *****************************************************************/ -static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, int mf) +static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf) { int status; @@ -550,7 +550,7 @@ static void kaweth_resubmit_tl(void *d) * kaweth_resubmit_rx_urb ****************************************************************/ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth, - unsigned mem_flags) + gfp_t mem_flags) { int result; diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index a4309c4a491b..cee55f8cf64f 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -500,7 +500,7 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff * -net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; struct sk_buff *skb2; diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index 2ed2e5fb7778..b5a925dc1beb 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -517,7 +517,7 @@ static int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff * -rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { struct rndis_data_hdr *hdr; struct sk_buff *skb2; diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 6c460918d54f..fce81d738933 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -288,7 +288,7 @@ EXPORT_SYMBOL_GPL(usbnet_defer_kevent); static void rx_complete (struct urb *urb, struct pt_regs *regs); -static void rx_submit (struct usbnet *dev, struct urb *urb, unsigned flags) +static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) { struct sk_buff *skb; struct skb_data *entry; diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h index 7aa0abd1a9bd..89fc4958eecf 100644 --- a/drivers/usb/net/usbnet.h +++ b/drivers/usb/net/usbnet.h @@ -107,7 +107,7 @@ struct driver_info { /* fixup tx packet (add framing) */ struct sk_buff *(*tx_fixup)(struct usbnet *dev, - struct sk_buff *skb, unsigned flags); + struct sk_buff *skb, gfp_t flags); /* for new devices, use the descriptor-reading code instead */ int in; /* rx endpoint */ diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index ee3b892aeabc..5d4b7d55b097 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -62,7 +62,7 @@ */ static struct sk_buff * -zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; struct sk_buff *skb2; diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index c4e479ee926a..2f52261c7cc1 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -521,7 +521,7 @@ static int zd1201_setconfig(struct zd1201 *zd, int rid, void *buf, int len, int int reqlen; char seq=0; struct urb *urb; - unsigned int gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC; + gfp_t gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC; len += 4; /* first 4 are for header */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 4dbe580f9335..8f731e8f2821 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -933,17 +933,17 @@ static inline void usb_fill_int_urb (struct urb *urb, } extern void usb_init_urb(struct urb *urb); -extern struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags); +extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags); extern void usb_free_urb(struct urb *urb); #define usb_put_urb usb_free_urb extern struct urb *usb_get_urb(struct urb *urb); -extern int usb_submit_urb(struct urb *urb, unsigned mem_flags); +extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); #define HAVE_USB_BUFFERS void *usb_buffer_alloc (struct usb_device *dev, size_t size, - unsigned mem_flags, dma_addr_t *dma); + gfp_t mem_flags, dma_addr_t *dma); void usb_buffer_free (struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); @@ -1050,7 +1050,7 @@ int usb_sg_init ( struct scatterlist *sg, int nents, size_t length, - unsigned mem_flags + gfp_t mem_flags ); void usb_sg_cancel (struct usb_sg_request *io); void usb_sg_wait (struct usb_sg_request *io); diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h index 71e608607324..ff81117eb733 100644 --- a/include/linux/usb_gadget.h +++ b/include/linux/usb_gadget.h @@ -107,18 +107,18 @@ struct usb_ep_ops { int (*disable) (struct usb_ep *ep); struct usb_request *(*alloc_request) (struct usb_ep *ep, - unsigned gfp_flags); + gfp_t gfp_flags); void (*free_request) (struct usb_ep *ep, struct usb_request *req); void *(*alloc_buffer) (struct usb_ep *ep, unsigned bytes, - dma_addr_t *dma, unsigned gfp_flags); + dma_addr_t *dma, gfp_t gfp_flags); void (*free_buffer) (struct usb_ep *ep, void *buf, dma_addr_t dma, unsigned bytes); // NOTE: on 2.6, drivers may also use dma_map() and // dma_sync_single_*() to directly manage dma overhead. int (*queue) (struct usb_ep *ep, struct usb_request *req, - unsigned gfp_flags); + gfp_t gfp_flags); int (*dequeue) (struct usb_ep *ep, struct usb_request *req); int (*set_halt) (struct usb_ep *ep, int value); @@ -214,7 +214,7 @@ usb_ep_disable (struct usb_ep *ep) * Returns the request, or null if one could not be allocated. */ static inline struct usb_request * -usb_ep_alloc_request (struct usb_ep *ep, unsigned gfp_flags) +usb_ep_alloc_request (struct usb_ep *ep, gfp_t gfp_flags) { return ep->ops->alloc_request (ep, gfp_flags); } @@ -254,7 +254,7 @@ usb_ep_free_request (struct usb_ep *ep, struct usb_request *req) */ static inline void * usb_ep_alloc_buffer (struct usb_ep *ep, unsigned len, dma_addr_t *dma, - unsigned gfp_flags) + gfp_t gfp_flags) { return ep->ops->alloc_buffer (ep, len, dma, gfp_flags); } @@ -330,7 +330,7 @@ usb_ep_free_buffer (struct usb_ep *ep, void *buf, dma_addr_t dma, unsigned len) * reported when the usb peripheral is disconnected. */ static inline int -usb_ep_queue (struct usb_ep *ep, struct usb_request *req, unsigned gfp_flags) +usb_ep_queue (struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { return ep->ops->queue (ep, req, gfp_flags); } diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index e0d0365453b3..f1a2e2c2e02f 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -163,7 +163,7 @@ static const uint8_t snd_usbmidi_cin_length[] = { /* * Submits the URB, with error handling. */ -static int snd_usbmidi_submit_urb(struct urb* urb, int flags) +static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags) { int err = usb_submit_urb(urb, flags); if (err < 0 && err != -ENODEV) -- cgit v1.2.3 From c53033f6b0bd7cc133b7f433083f0394cf29ac70 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:08 -0400 Subject: [PATCH] gfp_t: drivers/scsi Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/eata.c | 2 +- drivers/scsi/hosts.c | 3 ++- drivers/scsi/lpfc/lpfc_mem.c | 2 +- drivers/scsi/osst.c | 6 ++++-- drivers/scsi/qla2xxx/qla_gbl.h | 4 ++-- drivers/scsi/qla2xxx/qla_init.c | 2 +- drivers/scsi/qla2xxx/qla_rscn.c | 2 +- drivers/scsi/scsi.c | 8 ++++---- drivers/scsi/scsi_ioctl.c | 3 ++- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sg.c | 2 +- drivers/scsi/st.c | 6 ++++-- include/scsi/scsi_cmnd.h | 2 +- include/scsi/scsi_request.h | 2 +- 14 files changed, 26 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index c10e45b94b62..3d13fdee4fc2 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -1357,7 +1357,7 @@ static int port_detect(unsigned long port_base, unsigned int j, for (i = 0; i < shost->can_queue; i++) { size_t sz = shost->sg_tablesize *sizeof(struct sg_list); - unsigned int gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC; + gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC; ha->cp[i].sglist = kmalloc(sz, gfp_mask); if (!ha->cp[i].sglist) { printk diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 02fe371b0ab8..f24d84538fd5 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -287,7 +287,8 @@ static void scsi_host_dev_release(struct device *dev) struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) { struct Scsi_Host *shost; - int gfp_mask = GFP_KERNEL, rval; + gfp_t gfp_mask = GFP_KERNEL; + int rval; if (sht->unchecked_isa_dma && privsize) gfp_mask |= __GFP_DMA; diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 0aba13ceaacf..352df47bcaca 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -39,7 +39,7 @@ #define LPFC_MEM_POOL_SIZE 64 /* max elem in non-DMA safety pool */ static void * -lpfc_pool_kmalloc(unsigned int gfp_flags, void *data) +lpfc_pool_kmalloc(gfp_t gfp_flags, void *data) { return kmalloc((unsigned long)data, gfp_flags); } diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 3f2f2464fa63..af1133104b3f 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5146,7 +5146,8 @@ static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned /* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */ static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg ) { - int i, priority; + int i; + gfp_t priority; struct osst_buffer *tb; if (from_initialization) @@ -5178,7 +5179,8 @@ static struct osst_buffer * new_tape_buffer( int from_initialization, int need_d /* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */ static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) { - int segs, nbr, max_segs, b_size, priority, order, got; + int segs, nbr, max_segs, b_size, order, got; + gfp_t priority; if (STbuffer->buffer_size >= OS_FRAME_SIZE) return 1; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 1ed32e7b5472..e451941ad81d 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -52,7 +52,7 @@ extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *); extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *); -extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, int); +extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_loop_resync(scsi_qla_host_t *); @@ -277,7 +277,7 @@ extern int qla2x00_fdmi_register(scsi_qla_host_t *); /* * Global Function Prototypes in qla_rscn.c source file. */ -extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, int); +extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_handle_port_rscn(scsi_qla_host_t *, uint32_t, fc_port_t *, int); extern void qla2x00_process_iodesc(scsi_qla_host_t *, struct mbx_entry *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 23d095d3817b..fbb6feee40cf 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1685,7 +1685,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) * Returns a pointer to the allocated fcport, or NULL, if none available. */ fc_port_t * -qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags) +qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index 1eba98828636..7534efcc8918 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -1066,7 +1066,7 @@ qla2x00_send_login_iocb_cb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, * Returns a pointer to the allocated RSCN fcport, or NULL, if none available. */ fc_port_t * -qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, int flags) +qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 1f0ebabf6d47..a5711d545d71 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -130,7 +130,7 @@ EXPORT_SYMBOL(scsi_device_types); * Returns: Pointer to request block. */ struct scsi_request *scsi_allocate_request(struct scsi_device *sdev, - int gfp_mask) + gfp_t gfp_mask) { const int offset = ALIGN(sizeof(struct scsi_request), 4); const int size = offset + sizeof(struct request); @@ -196,7 +196,7 @@ struct scsi_host_cmd_pool { unsigned int users; char *name; unsigned int slab_flags; - unsigned int gfp_mask; + gfp_t gfp_mask; }; static struct scsi_host_cmd_pool scsi_cmd_pool = { @@ -213,7 +213,7 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { static DECLARE_MUTEX(host_cmd_pool_mutex); static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, - int gfp_mask) + gfp_t gfp_mask) { struct scsi_cmnd *cmd; @@ -245,7 +245,7 @@ static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, * * Returns: The allocated scsi command structure. */ -struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, int gfp_mask) +struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) { struct scsi_cmnd *cmd; diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index de7f98cc38fe..6a3f6aae8a97 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -205,7 +205,8 @@ int scsi_ioctl_send_command(struct scsi_device *sdev, unsigned int inlen, outlen, cmdlen; unsigned int needed, buf_needed; int timeout, retries, result; - int data_direction, gfp_mask = GFP_KERNEL; + int data_direction; + gfp_t gfp_mask = GFP_KERNEL; if (!sic) return -EINVAL; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 0074f28c37b2..3ff538809786 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -677,7 +677,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int uptodate, return NULL; } -static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, int gfp_mask) +static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, gfp_t gfp_mask) { struct scsi_host_sg_pool *sgp; struct scatterlist *sgl; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index ad94367df430..fd56b7ec88b6 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2644,7 +2644,7 @@ static char * sg_page_malloc(int rqSz, int lowDma, int *retSzp) { char *resp = NULL; - int page_mask; + gfp_t page_mask; int order, a_size; int resSz = rqSz; diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index d001c046551b..927d700f0073 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3577,7 +3577,8 @@ static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long a static struct st_buffer * new_tape_buffer(int from_initialization, int need_dma, int max_sg) { - int i, priority, got = 0, segs = 0; + int i, got = 0, segs = 0; + gfp_t priority; struct st_buffer *tb; if (from_initialization) @@ -3610,7 +3611,8 @@ static struct st_buffer * /* Try to allocate enough space in the tape buffer */ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma) { - int segs, nbr, max_segs, b_size, priority, order, got; + int segs, nbr, max_segs, b_size, order, got; + gfp_t priority; if (new_size <= STbuffer->buffer_size) return 1; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index bed4b7c9be99..e6b61fab66dd 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -146,7 +146,7 @@ struct scsi_cmnd { #define SCSI_STATE_MLQUEUE 0x100b -extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, int); +extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); diff --git a/include/scsi/scsi_request.h b/include/scsi/scsi_request.h index 6a140020d7cb..2539debb7993 100644 --- a/include/scsi/scsi_request.h +++ b/include/scsi/scsi_request.h @@ -45,7 +45,7 @@ struct scsi_request { level driver) of this request */ }; -extern struct scsi_request *scsi_allocate_request(struct scsi_device *, int); +extern struct scsi_request *scsi_allocate_request(struct scsi_device *, gfp_t); extern void scsi_release_request(struct scsi_request *); extern void scsi_wait_req(struct scsi_request *, const void *cmnd, void *buffer, unsigned bufflen, -- cgit v1.2.3 From 87b750dc4b7109aa744e7d331dc93df3fe5c1c28 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:13 -0400 Subject: [PATCH] gfp_t: drivers/infiniband Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/mthca/mthca_cmd.c | 2 +- drivers/infiniband/hw/mthca/mthca_cmd.h | 2 +- drivers/infiniband/hw/mthca/mthca_memfree.c | 2 +- drivers/infiniband/hw/mthca/mthca_memfree.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index f6a8ac026557..378646b5a1b8 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -524,7 +524,7 @@ void mthca_cmd_use_polling(struct mthca_dev *dev) } struct mthca_mailbox *mthca_alloc_mailbox(struct mthca_dev *dev, - unsigned int gfp_mask) + gfp_t gfp_mask) { struct mthca_mailbox *mailbox; diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index 65f976a13e02..18175bec84c2 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -248,7 +248,7 @@ void mthca_cmd_event(struct mthca_dev *dev, u16 token, u8 status, u64 out_param); struct mthca_mailbox *mthca_alloc_mailbox(struct mthca_dev *dev, - unsigned int gfp_mask); + gfp_t gfp_mask); void mthca_free_mailbox(struct mthca_dev *dev, struct mthca_mailbox *mailbox); int mthca_SYS_EN(struct mthca_dev *dev, u8 *status); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 7bd7a4bec7b4..9ad8b3b6cfef 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -82,7 +82,7 @@ void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm) } struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - unsigned int gfp_mask) + gfp_t gfp_mask) { struct mthca_icm *icm; struct mthca_icm_chunk *chunk = NULL; diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index bafa51544aa3..29433f295253 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -77,7 +77,7 @@ struct mthca_icm_iter { struct mthca_dev; struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - unsigned int gfp_mask); + gfp_t gfp_mask); void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm); struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, -- cgit v1.2.3 From 9e24974db6b01ec067c24de09588282b6a1407f0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:29 -0400 Subject: [PATCH] gfp_t: drivers/net Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/cassini.c | 4 ++-- drivers/net/lance.c | 4 ++-- drivers/net/myri_sbus.c | 2 +- drivers/net/myri_sbus.h | 2 +- drivers/net/sunbmac.c | 3 ++- drivers/net/sunbmac.h | 2 +- 6 files changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 2e617424d3fb..50f43dbf31ae 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -489,7 +489,7 @@ static int cas_page_free(struct cas *cp, cas_page_t *page) /* local page allocation routines for the receive buffers. jumbo pages * require at least 8K contiguous and 8K aligned buffers. */ -static cas_page_t *cas_page_alloc(struct cas *cp, const int flags) +static cas_page_t *cas_page_alloc(struct cas *cp, const gfp_t flags) { cas_page_t *page; @@ -561,7 +561,7 @@ static void cas_spare_free(struct cas *cp) } /* replenish spares if needed */ -static void cas_spare_recover(struct cas *cp, const int flags) +static void cas_spare_recover(struct cas *cp, const gfp_t flags) { struct list_head list, *elem, *tmp; int needed, i; diff --git a/drivers/net/lance.c b/drivers/net/lance.c index b4929beb33b2..1d75ca0bb939 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -298,7 +298,7 @@ enum {OLD_LANCE = 0, PCNET_ISA=1, PCNET_ISAP=2, PCNET_PCI=3, PCNET_VLB=4, PCNET_ static unsigned char lance_need_isa_bounce_buffers = 1; static int lance_open(struct net_device *dev); -static void lance_init_ring(struct net_device *dev, int mode); +static void lance_init_ring(struct net_device *dev, gfp_t mode); static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev); static int lance_rx(struct net_device *dev); static irqreturn_t lance_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -846,7 +846,7 @@ lance_purge_ring(struct net_device *dev) /* Initialize the LANCE Rx and Tx rings. */ static void -lance_init_ring(struct net_device *dev, int gfp) +lance_init_ring(struct net_device *dev, gfp_t gfp) { struct lance_private *lp = dev->priv; int i; diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c index f0996ce5c268..6c86dca62e2a 100644 --- a/drivers/net/myri_sbus.c +++ b/drivers/net/myri_sbus.c @@ -277,7 +277,7 @@ static void myri_init_rings(struct myri_eth *mp, int from_irq) struct recvq __iomem *rq = mp->rq; struct myri_rxd __iomem *rxd = &rq->myri_rxd[0]; struct net_device *dev = mp->dev; - int gfp_flags = GFP_KERNEL; + gfp_t gfp_flags = GFP_KERNEL; int i; if (from_irq || in_interrupt()) diff --git a/drivers/net/myri_sbus.h b/drivers/net/myri_sbus.h index 9391e55a5e92..47722f708a41 100644 --- a/drivers/net/myri_sbus.h +++ b/drivers/net/myri_sbus.h @@ -296,7 +296,7 @@ struct myri_eth { /* We use this to acquire receive skb's that we can DMA directly into. */ #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr)) -static inline struct sk_buff *myri_alloc_skb(unsigned int length, int gfp_flags) +static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags) { struct sk_buff *skb; diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c index f88f5e32b714..cfaf47c63c58 100644 --- a/drivers/net/sunbmac.c +++ b/drivers/net/sunbmac.c @@ -214,7 +214,8 @@ static void bigmac_init_rings(struct bigmac *bp, int from_irq) { struct bmac_init_block *bb = bp->bmac_block; struct net_device *dev = bp->dev; - int i, gfp_flags = GFP_KERNEL; + int i; + gfp_t gfp_flags = GFP_KERNEL; if (from_irq || in_interrupt()) gfp_flags = GFP_ATOMIC; diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h index 5674003fc38a..b0dbc5187143 100644 --- a/drivers/net/sunbmac.h +++ b/drivers/net/sunbmac.h @@ -339,7 +339,7 @@ struct bigmac { #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr)) -static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, int gfp_flags) +static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, gfp_t gfp_flags) { struct sk_buff *skb; -- cgit v1.2.3 From b4e3ca1ab1ae9ae86134126dcdc88da1caaa32ca Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:34 -0400 Subject: [PATCH] gfp_t: remaining bits of drivers/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/block/loop.c | 2 +- drivers/block/rd.c | 2 +- drivers/char/n_tty.c | 2 +- drivers/ieee1394/eth1394.c | 2 +- drivers/md/bitmap.c | 2 +- drivers/md/dm-crypt.c | 2 +- drivers/s390/net/fsm.c | 2 +- drivers/s390/net/fsm.h | 2 +- include/linux/i2o.h | 4 ++-- include/linux/loop.h | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index b35e08876dd4..96c664af8d06 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -881,7 +881,7 @@ loop_init_xfer(struct loop_device *lo, struct loop_func_table *xfer, static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev) { struct file *filp = lo->lo_backing_file; - int gfp = lo->old_gfp_mask; + gfp_t gfp = lo->old_gfp_mask; if (lo->lo_state != Lo_bound) return -ENXIO; diff --git a/drivers/block/rd.c b/drivers/block/rd.c index 145c1fbffe01..68c60a5bcdab 100644 --- a/drivers/block/rd.c +++ b/drivers/block/rd.c @@ -348,7 +348,7 @@ static int rd_open(struct inode *inode, struct file *filp) struct block_device *bdev = inode->i_bdev; struct address_space *mapping; unsigned bsize; - int gfp_mask; + gfp_t gfp_mask; inode = igrab(bdev->bd_inode); rd_bdev[unit] = bdev; diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index c9bdf544ed2c..c556f4d3ccd7 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -62,7 +62,7 @@ static inline unsigned char *alloc_buf(void) { - unsigned int prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; if (PAGE_SIZE != N_TTY_BUF_SIZE) return kmalloc(N_TTY_BUF_SIZE, prio); diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index 4802bbbb6dc9..c9e92d85c893 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -1630,7 +1630,7 @@ static void ether1394_complete_cb(void *__ptask) /* Transmit a packet (called by kernel) */ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev) { - int kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + gfp_t kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; struct eth1394hdr *eth; struct eth1394_priv *priv = netdev_priv(dev); int proto; diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 2fba2bbe72d8..01654fcabc52 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -91,7 +91,7 @@ int bitmap_active(struct bitmap *bitmap) #define WRITE_POOL_SIZE 256 /* mempool for queueing pending writes on the bitmap file */ -static void *write_pool_alloc(unsigned int gfp_flags, void *data) +static void *write_pool_alloc(gfp_t gfp_flags, void *data) { return kmalloc(sizeof(struct page_list), gfp_flags); } diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index b6148f6f7836..28c1a628621f 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -331,7 +331,7 @@ crypt_alloc_buffer(struct crypt_config *cc, unsigned int size, { struct bio *bio; unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - int gfp_mask = GFP_NOIO | __GFP_HIGHMEM; + gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM; unsigned int i; /* diff --git a/drivers/s390/net/fsm.c b/drivers/s390/net/fsm.c index fa09440d82e5..38f50b7129a2 100644 --- a/drivers/s390/net/fsm.c +++ b/drivers/s390/net/fsm.c @@ -16,7 +16,7 @@ MODULE_LICENSE("GPL"); fsm_instance * init_fsm(char *name, const char **state_names, const char **event_names, int nr_states, - int nr_events, const fsm_node *tmpl, int tmpl_len, int order) + int nr_events, const fsm_node *tmpl, int tmpl_len, gfp_t order) { int i; fsm_instance *this; diff --git a/drivers/s390/net/fsm.h b/drivers/s390/net/fsm.h index f9a011001eb6..1b8a7e7c34f3 100644 --- a/drivers/s390/net/fsm.h +++ b/drivers/s390/net/fsm.h @@ -110,7 +110,7 @@ extern fsm_instance * init_fsm(char *name, const char **state_names, const char **event_names, int nr_states, int nr_events, const fsm_node *tmpl, - int tmpl_len, int order); + int tmpl_len, gfp_t order); /** * Releases an FSM diff --git a/include/linux/i2o.h b/include/linux/i2o.h index bdc286ec947c..b4af45aad25d 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -492,7 +492,7 @@ static inline int i2o_dma_map_sg(struct i2o_controller *c, * Returns 0 on success or -ENOMEM on failure. */ static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, - size_t len, unsigned int gfp_mask) + size_t len, gfp_t gfp_mask) { struct pci_dev *pdev = to_pci_dev(dev); int dma_64 = 0; @@ -551,7 +551,7 @@ static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) * Returns the 0 on success or negative error code on failure. */ static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, - size_t len, unsigned int gfp_mask) + size_t len, gfp_t gfp_mask) { i2o_dma_free(dev, addr); diff --git a/include/linux/loop.h b/include/linux/loop.h index 53fa51595443..40f63c9879d2 100644 --- a/include/linux/loop.h +++ b/include/linux/loop.h @@ -52,7 +52,7 @@ struct loop_device { unsigned lo_blocksize; void *key_data; - int old_gfp_mask; + gfp_t old_gfp_mask; spinlock_t lo_lock; struct bio *lo_bio; -- cgit v1.2.3 From 0b83f1400fa6e5f0d4afcff033628a16c163862a Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 28 Oct 2005 16:19:37 +0100 Subject: [ARM] 2918/1: [update] Base port of Comdial MP1000 platfrom Patch from Jon Ringle Updated 2898/1 per comments: - Removed fixup - Moved code in mach-mp1000/ to mach-clps711x/ - Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom Please comment. Signed-off-by: Jon Ringle Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +- arch/arm/boot/compressed/head.S | 3 +- arch/arm/configs/mp1000_defconfig | 897 ++++++++++++++++++++++++++ arch/arm/mach-clps711x/Kconfig | 11 + arch/arm/mach-clps711x/Makefile | 1 + arch/arm/mach-clps711x/mp1000-mach.c | 49 ++ arch/arm/mach-clps711x/mp1000-mm.c | 47 ++ arch/arm/mach-clps711x/mp1000-seprom.c | 195 ++++++ drivers/serial/clps711x.c | 9 + include/asm-arm/arch-clps711x/hardware.h | 117 ++++ include/asm-arm/arch-clps711x/mp1000-seprom.h | 77 +++ 11 files changed, 1407 insertions(+), 2 deletions(-) create mode 100644 arch/arm/configs/mp1000_defconfig create mode 100644 arch/arm/mach-clps711x/mp1000-mach.c create mode 100644 arch/arm/mach-clps711x/mp1000-mm.c create mode 100644 arch/arm/mach-clps711x/mp1000-seprom.c create mode 100644 include/asm-arm/arch-clps711x/mp1000-seprom.h (limited to 'drivers') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 11fff042aa81..d885cc48bae1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -687,7 +687,8 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ + || MACH_MP1000 source "drivers/ide/Kconfig" endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c7f475e213e..a54d2eb64892 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -39,7 +39,8 @@ defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) + defined(CONFIG_ARCH_OMAP) || \ + defined(CONFIG_MACH_MP1000) .macro loadsp, rb addruart \rb .endm diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig new file mode 100644 index 000000000000..d2cbc6fada1d --- /dev/null +++ b/arch/arm/configs/mp1000_defconfig @@ -0,0 +1,897 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc1 +# Fri Sep 16 15:48:13 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +CONFIG_ARCH_CLPS711X=y +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# CLPS711X/EP721X Implementations +# +# CONFIG_ARCH_AUTCPU12 is not set +# CONFIG_ARCH_CDB89712 is not set +# CONFIG_ARCH_CEIVA is not set +# CONFIG_ARCH_CLEP7312 is not set +# CONFIG_ARCH_EDB7211 is not set +# CONFIG_ARCH_P720T is not set +# CONFIG_ARCH_FORTUNET is not set +CONFIG_MACH_MP1000=y +CONFIG_MP1000_90MHZ=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM720T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_LV4T=y +CONFIG_CPU_CACHE_V4=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WT=y +CONFIG_CPU_TLB_V4WT=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=m +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0x4000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_EDB7312=m +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_MP1000=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +CONFIG_IDE_ARM=y +CONFIG_BLK_DEV_IDE_MP1000=y +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_CS89x0=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CLPS711X=y +CONFIG_SERIAL_CLPS711X_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_NVRAM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_WAITQ=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_CLPS711X_UART2 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0793dcf54f2e..d5c155045762 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -69,6 +69,17 @@ config EP72XX_ROM_BOOT You almost surely want to say N here. +config MACH_MP1000 + bool "MACH_MP1000" + help + Say Y if you intend to run the kernel on the Comdial MP1000 platform. + +config MP1000_90MHZ + bool "MP1000_90MHZ" + depends on MACH_MP1000 + help + Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ + endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 4a197315f0cf..8a6dc1ccf8fe 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o +obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o obj-$(CONFIG_ARCH_P720T) += p720t.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c new file mode 100644 index 000000000000..c2816bcde5e7 --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-mach.c @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/mach-mp1000/mp1000.c + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +extern void mp1000_map_io(void); + +static void __init mp1000_init(void) +{ + seprom_init(); +} + +MACHINE_START(MP1000, "Comdial MP1000") + /* Maintainer: Jon Ringle */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0015100, + .map_io = mp1000_map_io, + .init_irq = clps711x_init_irq, + .init_machine = mp1000_init, + .timer = &clps711x_timer, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c new file mode 100644 index 000000000000..20e810b0ec0c --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-mm.c @@ -0,0 +1,47 @@ +/* + * linux/arch/arm/mach-mp1000/mm.c + * + * Extra MM routines for the MP1000 + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include + +#include +#include +#include +#include + +#include + +extern void clps711x_map_io(void); + +static struct map_desc mp1000_io_desc[] __initdata = { + { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE }, + { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE }, + { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE }, + { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE }, + { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE }, + { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE } +}; + +void __init mp1000_map_io(void) +{ + clps711x_map_io(); + iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc)); +} diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c new file mode 100644 index 000000000000..b22d0bebb851 --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-seprom.c @@ -0,0 +1,195 @@ +/*` + * mp1000-seprom.c + * + * This file contains the Serial EEPROM code for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +/* If SepromInit() can initialize and checksum the seprom successfully, */ +/* then it will point seprom_data_ptr at the shadow copy. */ + +static eeprom_struct seprom_data; /* shadow copy of seprom content */ + +eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */ + +/* + * Port D Bit 5 is Chip Select for EEPROM + * Port E Bit 0 is Input, Data out from EEPROM + * Port E Bit 1 is Output, Data in to EEPROM + * Port E Bit 2 is Output, CLK to EEPROM + */ + +static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR); +static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR); + +#define NO_OF_SHORTS 64 // Device is 64 x 16 bits +#define ENABLE_RW 0 +#define DISABLE_RW 1 + +static inline void toggle_seprom_clock(void) +{ + *port_e_ptr |= HwPortESepromCLK; + *port_e_ptr &= ~(HwPortESepromCLK); +} + +static inline void select_eeprom(void) +{ + *port_d_ptr |= HwPortDEECS; + *port_e_ptr &= ~(HwPortESepromCLK); +} + +static inline void deselect_eeprom(void) +{ + *port_d_ptr &= ~(HwPortDEECS); + *port_e_ptr &= ~(HwPortESepromDIn); +} + +/* + * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom + * and returns 0 if seprom is not initialized or + * has a checksum error. + */ + +eeprom_struct* get_seprom_ptr(void) +{ + return seprom_data_ptr; +} + +unsigned char* get_eeprom_mac_address(void) +{ + return seprom_data_ptr->variant.eprom_struct.mac_Address; +} + +/* + * ReadSProm, Physically reads data from the Serial PROM + */ +static void read_sprom(short address, int length, eeprom_struct *buffer) +{ + short data = COMMAND_READ | (address & 0x3F); + short bit; + int i; + + select_eeprom(); + + // Clock in 9 bits of the command + for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) { + if (data & bit) + *port_e_ptr |= HwPortESepromDIn; + else + *port_e_ptr &= ~(HwPortESepromDIn); + + toggle_seprom_clock(); + } + + // + // Now read one or more shorts of data from the Seprom + // + while (length-- > 0) { + data = 0; + + // Read 16 bits at a time + for (i = 0; i < 16; i++) { + data <<= 1; + toggle_seprom_clock(); + data |= *port_e_ptr & HwPortESepromDOut; + + } + + buffer->variant.eprom_short_data[address++] = data; + } + + deselect_eeprom(); + + return; +} + + + +/* + * ReadSerialPROM + * + * Input: Pointer to array of 64 x 16 Bits + * + * Output: if no problem reading data is filled in + */ +static void read_serial_prom(eeprom_struct *data) +{ + read_sprom(0, 64, data); +} + + +// +// Compute Serial EEPROM checksum +// +// Input: Pointer to struct with Eprom data +// +// Output: The computed Eprom checksum +// +static short compute_seprom_checksum(eeprom_struct *data) +{ + short checksum = 0; + int i; + + for (i = 0; i < 126; i++) { + checksum += (short)data->variant.eprom_byte_data[i]; + } + + return((short)(0x5555 - (checksum & 0xFFFF))); +} + +// +// Make sure the data port bits for the SEPROM are correctly initialised +// + +void __init seprom_init(void) +{ + short checksum; + + // Init Port D + *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0; + *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15; + + // Init Port E + *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06; + *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04; + + // + // Make sure that EEPROM struct size never exceeds 128 bytes + // + if (sizeof(eeprom_struct) > 128) { + panic("Serial PROM struct size > 128, aborting read\n"); + } + + read_serial_prom(&seprom_data); + + checksum = compute_seprom_checksum(&seprom_data); + + if (checksum != seprom_data.variant.eprom_short_data[63]) { + panic("Serial EEPROM checksum failed\n"); + } + + seprom_data_ptr = &seprom_data; +} + diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 87ef368384fb..6a67e8f585b3 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -408,7 +408,11 @@ static struct uart_port clps711x_ports[UART_NR] = { { .iobase = SYSCON1, .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ +#ifdef CONFIG_MP1000_90MHZ + .uartclk = 4515840, +#else .uartclk = 3686400, +#endif .fifosize = 16, .ops = &clps711x_pops, .line = 0, @@ -417,7 +421,11 @@ static struct uart_port clps711x_ports[UART_NR] = { { .iobase = SYSCON2, .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ +#ifdef CONFIG_MP1000_90MHZ + .uartclk = 4515840, +#else .uartclk = 3686400, +#endif .fifosize = 16, .ops = &clps711x_pops, .line = 1, @@ -551,6 +559,7 @@ console_initcall(clps711xuart_console_init); static struct uart_driver clps711x_reg = { .driver_name = "ttyCL", .dev_name = "ttyCL", + .devfs_name = "ttyCL", .major = SERIAL_CLPS711X_MAJOR, .minor = SERIAL_CLPS711X_MINOR, .nr = UART_NR, diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index 1386871e1a5a..f864c367c934 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,4 +235,121 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) +#if defined (CONFIG_MACH_MP1000) +/* NOR FLASH */ +#define MP1000_NIO_BASE 0xf9000000 /* virtual */ +#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ +#define MP1000_NIO_SIZE 0x00400000 + +/* DSP Interface */ +#define MP1000_DSP_BASE 0xfa000000 /* virtual */ +#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ +#define MP1000_DSP_SIZE 0x00100000 + +/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ +#define MP1000_LIO_BASE 0xfb000000 /* virtual */ +#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ +#define MP1000_LIO_SIZE 0x00100000 + +/* NAND FLASH */ +#define MP1000_FIO_BASE 0xfc000000 /* virtual */ +#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ +#define MP1000_FIO_SIZE 0x00800000 + +/* Ethernet */ +#define MP1000_EIO_BASE 0xfd000000 /* virtual */ +#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ +#define MP1000_EIO_SIZE 0x00100000 + +#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ +#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ +#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ +#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ + +/* IDE */ +#define MP1000_IDE_BASE 0xfe000000 /* virtual */ +#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ +#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ + +#define IRQ_HARDDISK IRQ_EINT2 + +/* + * IDE registers definition + */ + +#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) +#define IDE_BASE_OFF (MP1000_IDE_BASE) + +#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) +#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) +#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) +#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) +#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) +#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) +#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) +#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) +#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) + +#define IDE_IRQ IRQ_EINT2 + + +#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) +#define RTC_ALWAYS_BCD 0 + +/* +// Definitions of the bit fields in the HwPortA register for the +// MP1000 board. +*/ +#define HwPortAKeyboardRow1 0x00000001 +#define HwPortAKeyboardRow2 0x00000002 +#define HwPortAKeyboardRow3 0x00000004 +#define HwPortAKeyboardRow4 0x00000008 +#define HwPortAKeyboardRow5 0x00000010 +#define HwPortAKeyboardRow6 0x00000020 +#define HwPortALCDEnable 0x00000040 +#define HwPortAOffhook 0x00000080 + +/* +// Definitions of the bit fields in the HwPortB register for the +// MP1000 board. +*/ +#define HwPortBL3Mode 0x00000001 +#define HwPortBL3Clk 0x00000002 +#define HwPortBSClk 0x00000001 +#define HwPortBSData 0x00000002 +#define HwPortBL3Data 0x00000004 +#define HwPortBMute 0x00000008 +#define HwPortBQD0 0x00000010 +#define HwPortBQD1 0x00000020 +#define HwPortBQD2 0x00000040 +#define HwPortBQD3 0x00000080 + +/* +// Definitions of the bit fields in the HwPortD register for the +// MP1000 board. +*/ +#define HwPortDLED1 0x00000001 +#define HwPortDLED2 0x00000002 +#define HwPortDLED3 0x00000004 +#define HwPortDLED4 0x00000008 +#define HwPortDLED5 0x00000010 +#define HwPortDEECS 0x00000020 +#define HwPortBRTS 0x00000040 +#define HwPortBRI 0x00000080 + + +/* +// Definitions of the bit fields in the HwPortE register for the +// MP1000 board. +*/ + +#define HwPortECLE 0x00000001 +#define HwPortESepromDOut 0x00000001 +#define HwPortEALE 0x00000002 +#define HwPortESepromDIn 0x00000002 +#define HwPortENANDCS 0x00000004 +#define HwPortESepromCLK 0x00000004 + +#endif // #if defined (CONFIG_MACH_MP1000) + #endif diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h new file mode 100644 index 000000000000..3e5566cf9666 --- /dev/null +++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h @@ -0,0 +1,77 @@ +#ifndef MP1000_SEPROM_H +#define MP1000_SEPROM_H + +/* + * mp1000-seprom.h + * + * + * This file contains the Serial EEPROM definitions for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define COMMAND_ERASE (0x1C0) +#define COMMAND_ERASE_ALL (0x120) +#define COMMAND_WRITE_DISABLE (0x100) +#define COMMAND_WRITE_ENABLE (0x130) +#define COMMAND_READ (0x180) +#define COMMAND_WRITE (0x140) +#define COMMAND_WRITE_ALL (0x110) + +// +// Serial EEPROM data format +// + +#define PACKED __attribute__ ((packed)) + +typedef struct _EEPROM { + union { + unsigned char eprom_byte_data[128]; + unsigned short eprom_short_data[64]; + struct { + unsigned char version PACKED; // EEPROM Version "1" for now + unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc) + unsigned char major_hw_version PACKED; // Major Hardware version (Hex) + unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex) + unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic) + unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number + unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD) + unsigned char country PACKED; // Country of deployment + unsigned char mac_Address[6] PACKED; // MAC Address + unsigned char oem_string[20] PACKED; // OEM ID string + unsigned short feature_bits1 PACKED; // Feature Bits 1 + unsigned short feature_bits2 PACKED; // Feature Bits 2 + unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized + unsigned short checksum PACKED; // byte accumulated short checksum + } eprom_struct; + } variant; +} eeprom_struct; + +/* These settings must be mutually exclusive */ +#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */ +#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */ +#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */ + +#define FEATURE_BITS1_CPUIS90MEG 0x0010 + +extern void seprom_init(void); +extern eeprom_struct* get_seprom_ptr(void); +extern unsigned char* get_eeprom_mac_address(void); + +#endif /* MP1000_SEPROM_H */ + -- cgit v1.2.3 From 917f68f8163eb877a6d71c5b446ee236645c2944 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 28 Oct 2005 16:19:38 +0100 Subject: [ARM] 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000 Patch from Jon Ringle This patch gives support for the CS8900A ethernet chip on the Comdial MP1000 Signed-off-by: Jon Ringle Signed-off-by: Russell King --- drivers/net/Kconfig | 2 +- drivers/net/cs89x0.c | 14 +++++++++++++- drivers/net/cs89x0.h | 2 +- 3 files changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c748b0e16419..3e1e323e3003 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1330,7 +1330,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index a6078ad9b654..bfdae10036ed 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -182,6 +182,10 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; +#elif defined(CONFIG_MACH_MP1000) +#include +static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0}; +static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0}; #else static unsigned int netcard_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -590,6 +594,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) cnt -= j; } } else +#elif defined(CONFIG_MACH_MP1000) + if (1) { + memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN); + } else #endif if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == @@ -649,6 +657,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) if (1) { printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n"); } else +#elif defined(CONFIG_MACH_MP1000) + if (1) { + lp->force |= FORCE_RJ45; + } else #endif if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n"); @@ -1231,7 +1243,7 @@ net_open(struct net_device *dev) else #endif { -#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) +#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h index decea264f121..f19d1ebe0183 100644 --- a/drivers/net/cs89x0.h +++ b/drivers/net/cs89x0.h @@ -16,7 +16,7 @@ #include -#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000) /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ #define CS89x0_PORT(reg) ((reg) * 2) #else -- cgit v1.2.3 From d9e29649875df82828167dd45c802d942db863ba Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Fri, 28 Oct 2005 16:25:02 +0100 Subject: [ARM] 3029/1: Add HWUART support for PXA 255/26x Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: Matt Reimer Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 18 +++++++++++++++++- drivers/serial/pxa.c | 21 ++++++++++++++++++++- include/asm-arm/arch-pxa/pxa-regs.h | 33 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/uncompress.h | 1 + 4 files changed, 71 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 719b91e93fa2..218eb9671fa3 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -253,6 +253,10 @@ static struct platform_device stuart_device = { .name = "pxa2xx-uart", .id = 2, }; +static struct platform_device hwuart_device = { + .name = "pxa2xx-uart", + .id = 3, +}; static struct resource i2c_resources[] = { { @@ -310,7 +314,19 @@ static struct platform_device *devices[] __initdata = { static int __init pxa_init(void) { - return platform_add_devices(devices, ARRAY_SIZE(devices)); + int cpuid, ret; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) + return ret; + + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ + cpuid = read_cpuid(CPUID_ID); + if (((cpuid >> 4) & 0xfff) == 0x2d0 || + ((cpuid >> 4) & 0xfff) == 0x290) + ret = platform_device_register(&hwuart_device); + + return ret; } subsys_initcall(pxa_init); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 90c2a86c421b..005f027e081a 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -358,6 +358,9 @@ static int serial_pxa_startup(struct uart_port *port) unsigned long flags; int retval; + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else up->mcr = 0; /* @@ -481,8 +484,10 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios, if ((up->port.uartclk / quot) < (2400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; - else + else if ((up->port.uartclk / quot) < (230400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; /* * Ok, we're now changing the port state. Do it with @@ -772,6 +777,20 @@ static struct uart_pxa_port serial_pxa_ports[] = { .ops = &serial_pxa_pops, .line = 2, }, + }, { /* HWUART */ + .name = "HWUART", + .cken = CKEN4_HWUART, + .port = { + .type = PORT_PXA, + .iotype = UPIO_MEM, + .membase = (void *)&HWUART, + .mapbase = __PREG(HWUART), + .irq = IRQ_HWUART, + .uartclk = 921600 * 16, + .fifosize = 64, + .ops = &serial_pxa_pops, + .line = 3, + }, } }; diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index a6a34edec813..75f085dc9894 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -326,6 +326,25 @@ #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ +/* Hardware UART (HWUART) */ +#define HWUART HWRBR +#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ +#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ +#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ +#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ +#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ +#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ +#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ +#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ +#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ +#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ +#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ +#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ +#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ +#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ +#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + #define IER_DMAE (1 << 7) /* DMA Requests Enable */ #define IER_UUE (1 << 6) /* UART Unit Enable */ #define IER_NRZE (1 << 5) /* NRZ coding Enable */ @@ -1250,9 +1269,13 @@ #define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ #define GPIO41_FFRTS 41 /* FFUART request to send */ #define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO42_HWRXD 42 /* HWUART receive data */ #define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO43_HWTXD 43 /* HWUART transmit data */ #define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO44_HWCTS 44 /* HWUART clear to send */ #define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO45_HWRTS 45 /* HWUART request to send */ #define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ #define GPIO46_ICPRXD 46 /* ICP receive data */ #define GPIO46_STRXD 46 /* STD_UART receive data */ @@ -1378,17 +1401,26 @@ #define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) #define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) #define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) #define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) #define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) #define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) #define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) #define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) #define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) #define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) #define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) @@ -1763,6 +1795,7 @@ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ #define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ +#define CKEN4_HWUART (1 << 4) /* HWUART Unit Clock Enable */ #define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ #define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ #define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */ diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index 4428d3eb7432..fe38090444e0 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -12,6 +12,7 @@ #define FFUART ((volatile unsigned long *)0x40100000) #define BTUART ((volatile unsigned long *)0x40200000) #define STUART ((volatile unsigned long *)0x40700000) +#define HWUART ((volatile unsigned long *)0x41600000) #define UART FFUART -- cgit v1.2.3 From dd5b295ff880d5a0699a52f84106f16702c298f2 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 28 Oct 2005 16:27:24 +0100 Subject: [ARM] 2921/1: Support for the RTC / nvram on the Comdial MP1000 Patch from Jon Ringle This adds support for the RTC and nvram on the Comdial MP1000 Signed-off-by: Jon Ringle Signed-off-by: Russell King --- drivers/char/nvram.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 109 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index 1af733d07321..9e24bbd4090c 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -32,9 +32,11 @@ * added changelog * 1.2 Erik Gilling: Cobalt Networks support * Tim Hockin: general cleanup, Cobalt support + * 1.3 Jon Ringle: Comdial MP1000 support + * */ -#define NVRAM_VERSION "1.2" +#define NVRAM_VERSION "1.3" #include #include @@ -45,6 +47,7 @@ #define PC 1 #define ATARI 2 #define COBALT 3 +#define MP1000 4 /* select machine configuration */ #if defined(CONFIG_ATARI) @@ -54,6 +57,9 @@ # if defined(CONFIG_COBALT) # include # define MACH COBALT +# elif defined(CONFIG_MACH_MP1000) +# undef MACH +# define MACH MP1000 # else # define MACH PC # endif @@ -112,6 +118,23 @@ #endif +#if MACH == MP1000 + +/* RTC in a MP1000 */ +#define CHECK_DRIVER_INIT() 1 + +#define MP1000_CKS_RANGE_START 0 +#define MP1000_CKS_RANGE_END 111 +#define MP1000_CKS_LOC 112 + +#define NVRAM_BYTES (128-NVRAM_FIRST_BYTE) + +#define mach_check_checksum mp1000_check_checksum +#define mach_set_checksum mp1000_set_checksum +#define mach_proc_infos mp1000_proc_infos + +#endif + /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with * rtc_lock held. Due to the index-port/data-port design of the RTC, we * don't want two different things trying to get to it at once. (e.g. the @@ -915,6 +938,91 @@ atari_proc_infos(unsigned char *nvram, char *buffer, int *len, #endif /* MACH == ATARI */ +#if MACH == MP1000 + +static int +mp1000_check_checksum(void) +{ + int i; + unsigned short sum = 0; + unsigned short expect; + + for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i) + sum += __nvram_read_byte(i); + + expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 | + __nvram_read_byte(MP1000_CKS_LOC); + return ((sum & 0xffff) == expect); +} + +static void +mp1000_set_checksum(void) +{ + int i; + unsigned short sum = 0; + + for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i) + sum += __nvram_read_byte(i); + __nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1); + __nvram_write_byte(sum & 0xff, MP1000_CKS_LOC); +} + +#ifdef CONFIG_PROC_FS + +#define SERVER_N_LEN 32 +#define PATH_N_LEN 32 +#define FILE_N_LEN 32 +#define NVRAM_MAGIC_SIG 0xdead + +typedef struct NvRamImage +{ + unsigned short int magic; + unsigned short int mode; + char fname[FILE_N_LEN]; + char path[PATH_N_LEN]; + char server[SERVER_N_LEN]; + char pad[12]; +} NvRam; + +static int +mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len, + off_t *begin, off_t offset, int size) +{ + int checksum; + NvRam* nv = (NvRam*)nvram; + + spin_lock_irq(&rtc_lock); + checksum = __nvram_check_checksum(); + spin_unlock_irq(&rtc_lock); + + PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not "); + + switch( nv->mode ) + { + case 0 : + PRINT_PROC( "\tMode 0, tftp prompt\n" ); + break; + case 1 : + PRINT_PROC( "\tMode 1, booting from disk\n" ); + break; + case 2 : + PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname ); + break; + case 3 : + PRINT_PROC( "\tMode 3, Booting from net:\n" ); + PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname ); + break; + default: + PRINT_PROC( "\tInconsistant nvram?\n" ); + break; + } + + return 1; +} +#endif + +#endif /* MACH == MP1000 */ + MODULE_LICENSE("GPL"); EXPORT_SYMBOL(__nvram_read_byte); -- cgit v1.2.3 From 6f475c0133eb91c7df3b056843dc33d2824368a2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 28 Oct 2005 16:39:33 +0100 Subject: [ARM] 2897/2: PXA2xx IRDA support Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: Nicolas Pitre Acked-by: Jean Tourrilhes Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 18 + arch/arm/mach-pxa/lubbock.c | 20 + arch/arm/mach-pxa/mainstone.c | 25 ++ drivers/net/irda/Kconfig | 10 + drivers/net/irda/Makefile | 1 + drivers/net/irda/pxaficp_ir.c | 871 ++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/irda.h | 17 + include/asm-arm/arch-pxa/pxa-regs.h | 2 - 8 files changed, 962 insertions(+), 2 deletions(-) create mode 100644 drivers/net/irda/pxaficp_ir.c create mode 100644 include/asm-arm/arch-pxa/irda.h (limited to 'drivers') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 218eb9671fa3..3248bc9b9495 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include "generic.h" @@ -301,6 +302,22 @@ static struct platform_device i2s_device = { .num_resources = ARRAY_SIZE(i2s_resources), }; +static u64 pxaficp_dmamask = ~(u32)0; + +static struct platform_device pxaficp_device = { + .name = "pxa2xx-ir", + .id = -1, + .dev = { + .dma_mask = &pxaficp_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) +{ + pxaficp_device.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &pxamci_device, &udc_device, @@ -308,6 +325,7 @@ static struct platform_device *devices[] __initdata = { &ffuart_device, &btuart_device, &stuart_device, + &pxaficp_device, &i2c_device, &i2s_device, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 69abc7f61ed0..beccf455f796 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -237,11 +238,30 @@ static struct pxamci_platform_data lubbock_mci_platform_data = { .init = lubbock_mci_init, }; +static void lubbock_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + LUB_MISC_WR &= ~(1 << 4); + } else if (mode & IR_FIRMODE) { + LUB_MISC_WR |= 1 << 4; + } + local_irq_restore(flags); +} + +static struct pxaficp_platform_data lubbock_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE, + .transceiver_mode = lubbock_irda_transceiver_mode, +}; + static void __init lubbock_init(void) { pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); + pxa_set_ficp_info(&lubbock_ficp_platform_data); (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 8b4a21623fc0..a48c64026e1f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "generic.h" @@ -294,6 +295,29 @@ static struct pxamci_platform_data mainstone_mci_platform_data = { .exit = mainstone_mci_exit, }; +static void mainstone_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR; + } else if (mode & IR_FIRMODE) { + MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR; + } + if (mode & IR_OFF) { + MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF; + } else { + MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL; + } + local_irq_restore(flags); +} + +static struct pxaficp_platform_data mainstone_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = mainstone_irda_transceiver_mode, +}; + static void __init mainstone_init(void) { /* @@ -313,6 +337,7 @@ static void __init mainstone_init(void) set_pxa_fb_info(&toshiba_ltm035a776c); pxa_set_mci_info(&mainstone_mci_platform_data); + pxa_set_ficp_info(&mainstone_ficp_platform_data); } diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index ca5914091d3a..d54156f11e61 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -400,5 +400,15 @@ config VIA_FIR To compile it as a module, choose M here: the module will be called via-ircc. +config PXA_FICP + tristate "Intel PXA2xx Internal FICP" + depends on ARCH_PXA && IRDA + help + Say Y or M here if you want to build support for the PXA2xx + built-in IRDA interface which can support both SIR and FIR. + This driver relies on platform specific helper routines so + available capabilities may vary from one PXA2xx target to + another. + endmenu diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index 29a8bd812b21..e7a8b7f7f5dd 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o obj-$(CONFIG_ALI_FIR) += ali-ircc.o obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o obj-$(CONFIG_VIA_FIR) += via-ircc.o +obj-$(CONFIG_PXA_FICP) += pxaficp_ir.o # Old dongle drivers for old SIR drivers obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c new file mode 100644 index 000000000000..aef80f5e7c9c --- /dev/null +++ b/drivers/net/irda/pxaficp_ir.c @@ -0,0 +1,871 @@ +/* + * linux/drivers/net/irda/pxaficp_ir.c + * + * Based on sa1100_ir.c by Russell King + * + * Changes copyright (C) 2003-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MACH_MAINSTONE +#include +#endif + +#define IrSR_RXPL_NEG_IS_ZERO (1<<4) +#define IrSR_RXPL_POS_IS_ZERO 0x0 +#define IrSR_TXPL_NEG_IS_ZERO (1<<3) +#define IrSR_TXPL_POS_IS_ZERO 0x0 +#define IrSR_XMODE_PULSE_1_6 (1<<2) +#define IrSR_XMODE_PULSE_3_16 0x0 +#define IrSR_RCVEIR_IR_MODE (1<<1) +#define IrSR_RCVEIR_UART_MODE 0x0 +#define IrSR_XMITIR_IR_MODE (1<<0) +#define IrSR_XMITIR_UART_MODE 0x0 + +#define IrSR_IR_RECEIVE_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) + +#define IrSR_IR_TRANSMIT_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) + +struct pxa_irda { + int speed; + int newspeed; + unsigned long last_oscr; + + unsigned char *dma_rx_buff; + unsigned char *dma_tx_buff; + dma_addr_t dma_rx_buff_phy; + dma_addr_t dma_tx_buff_phy; + unsigned int dma_tx_buff_len; + int txdma; + int rxdma; + + struct net_device_stats stats; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct device *dev; + struct pxaficp_platform_data *pdata; +}; + + +#define IS_FIR(si) ((si)->speed >= 4000000) +#define IRDA_FRAME_SIZE_LIMIT 2047 + +inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si) +{ + DCSR(si->rxdma) = DCSR_NODESC; + DSADR(si->rxdma) = __PREG(ICDR); + DTADR(si->rxdma) = si->dma_rx_buff_phy; + DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT; + DCSR(si->rxdma) |= DCSR_RUN; +} + +inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si) +{ + DCSR(si->txdma) = DCSR_NODESC; + DSADR(si->txdma) = si->dma_tx_buff_phy; + DTADR(si->txdma) = __PREG(ICDR); + DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len; + DCSR(si->txdma) |= DCSR_RUN; +} + +/* + * Set the IrDA communications speed. + */ +static int pxa_irda_set_speed(struct pxa_irda *si, int speed) +{ + unsigned long flags; + unsigned int divisor; + + switch (speed) { + case 9600: case 19200: case 38400: + case 57600: case 115200: + + /* refer to PXA250/210 Developer's Manual 10-7 */ + /* BaudRate = 14.7456 MHz / (16*Divisor) */ + divisor = 14745600 / (16 * speed); + + local_irq_save(flags); + + if (IS_FIR(si)) { + /* stop RX DMA */ + DCSR(si->rxdma) &= ~DCSR_RUN; + /* disable FICP */ + ICCR0 = 0; + pxa_set_cken(CKEN13_FICP, 0); + + /* set board transceiver to SIR mode */ + si->pdata->transceiver_mode(si->dev, IR_SIRMODE); + + /* configure GPIO46/47 */ + pxa_gpio_mode(GPIO46_STRXD_MD); + pxa_gpio_mode(GPIO47_STTXD_MD); + + /* enable the STUART clock */ + pxa_set_cken(CKEN5_STUART, 1); + } + + /* disable STUART first */ + STIER = 0; + + /* access DLL & DLH */ + STLCR |= LCR_DLAB; + STDLL = divisor & 0xff; + STDLH = divisor >> 8; + STLCR &= ~LCR_DLAB; + + si->speed = speed; + STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; + STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; + + local_irq_restore(flags); + break; + + case 4000000: + local_irq_save(flags); + + /* disable STUART */ + STIER = 0; + STISR = 0; + pxa_set_cken(CKEN5_STUART, 0); + + /* disable FICP first */ + ICCR0 = 0; + + /* set board transceiver to FIR mode */ + si->pdata->transceiver_mode(si->dev, IR_FIRMODE); + + /* configure GPIO46/47 */ + pxa_gpio_mode(GPIO46_ICPRXD_MD); + pxa_gpio_mode(GPIO47_ICPTXD_MD); + + /* enable the FICP clock */ + pxa_set_cken(CKEN13_FICP, 1); + + si->speed = speed; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + + local_irq_restore(flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* SIR interrupt service routine. */ +static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct pxa_irda *si = netdev_priv(dev); + int iir, lsr, data; + + iir = STIIR; + + switch (iir & 0x0F) { + case 0x06: /* Receiver Line Status */ + lsr = STLSR; + while (lsr & LSR_FIFOE) { + data = STRBR; + if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) { + printk(KERN_DEBUG "pxa_ir: sir receiving error\n"); + si->stats.rx_errors++; + if (lsr & LSR_FE) + si->stats.rx_frame_errors++; + if (lsr & LSR_OE) + si->stats.rx_fifo_errors++; + } else { + si->stats.rx_bytes++; + async_unwrap_char(dev, &si->stats, &si->rx_buff, data); + } + lsr = STLSR; + } + dev->last_rx = jiffies; + si->last_oscr = OSCR; + break; + + case 0x04: /* Received Data Available */ + /* forth through */ + + case 0x0C: /* Character Timeout Indication */ + do { + si->stats.rx_bytes++; + async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR); + } while (STLSR & LSR_DR); + dev->last_rx = jiffies; + si->last_oscr = OSCR; + break; + + case 0x02: /* Transmit FIFO Data Request */ + while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) { + STTHR = *si->tx_buff.data++; + si->tx_buff.len -= 1; + } + + if (si->tx_buff.len == 0) { + si->stats.tx_packets++; + si->stats.tx_bytes += si->tx_buff.data - + si->tx_buff.head; + + /* We need to ensure that the transmitter has finished. */ + while ((STLSR & LSR_TEMT) == 0) + cpu_relax(); + si->last_oscr = OSCR; + + /* + * Ok, we've finished transmitting. Now enable + * the receiver. Sometimes we get a receive IRQ + * immediately after a transmit... + */ + if (si->newspeed) { + pxa_irda_set_speed(si, si->newspeed); + si->newspeed = 0; + } else { + /* enable IR Receiver, disable IR Transmitter */ + STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; + /* enable STUART and receive interrupts */ + STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; + } + /* I'm hungry! */ + netif_wake_queue(dev); + } + break; + } + + return IRQ_HANDLED; +} + +/* FIR Receive DMA interrupt handler */ +static void pxa_irda_fir_dma_rx_irq(int channel, void *data, struct pt_regs *regs) +{ + int dcsr = DCSR(channel); + + DCSR(channel) = dcsr & ~DCSR_RUN; + + printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr); +} + +/* FIR Transmit DMA interrupt handler */ +static void pxa_irda_fir_dma_tx_irq(int channel, void *data, struct pt_regs *regs) +{ + struct net_device *dev = data; + struct pxa_irda *si = netdev_priv(dev); + int dcsr; + + dcsr = DCSR(channel); + DCSR(channel) = dcsr & ~DCSR_RUN; + + if (dcsr & DCSR_ENDINTR) { + si->stats.tx_packets++; + si->stats.tx_bytes += si->dma_tx_buff_len; + } else { + si->stats.tx_errors++; + } + + while (ICSR1 & ICSR1_TBY) + cpu_relax(); + si->last_oscr = OSCR; + + /* + * HACK: It looks like the TBY bit is dropped too soon. + * Without this delay things break. + */ + udelay(120); + + if (si->newspeed) { + pxa_irda_set_speed(si, si->newspeed); + si->newspeed = 0; + } else { + ICCR0 = 0; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + } + netif_wake_queue(dev); +} + +/* EIF(Error in FIFO/End in Frame) handler for FIR */ +static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev) +{ + unsigned int len, stat, data; + + /* Get the current data position. */ + len = DTADR(si->rxdma) - si->dma_rx_buff_phy; + + do { + /* Read Status, and then Data. */ + stat = ICSR1; + rmb(); + data = ICDR; + + if (stat & (ICSR1_CRE | ICSR1_ROR)) { + si->stats.rx_errors++; + if (stat & ICSR1_CRE) { + printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n"); + si->stats.rx_crc_errors++; + } + if (stat & ICSR1_ROR) { + printk(KERN_DEBUG "pxa_ir: fir receive overrun\n"); + si->stats.rx_frame_errors++; + } + } else { + si->dma_rx_buff[len++] = data; + } + /* If we hit the end of frame, there's no point in continuing. */ + if (stat & ICSR1_EOF) + break; + } while (ICSR0 & ICSR0_EIF); + + if (stat & ICSR1_EOF) { + /* end of frame. */ + struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n"); + si->stats.rx_dropped++; + return; + } + + /* Align IP header to 20 bytes */ + skb_reserve(skb, 1); + memcpy(skb->data, si->dma_rx_buff, len); + skb_put(skb, len); + + /* Feed it to IrLAP */ + skb->dev = dev; + skb->mac.raw = skb->data; + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + + si->stats.rx_packets++; + si->stats.rx_bytes += len; + + dev->last_rx = jiffies; + } +} + +/* FIR interrupt handler */ +static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct pxa_irda *si = netdev_priv(dev); + int icsr0; + + /* stop RX DMA */ + DCSR(si->rxdma) &= ~DCSR_RUN; + si->last_oscr = OSCR; + icsr0 = ICSR0; + + if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) { + if (icsr0 & ICSR0_FRE) { + printk(KERN_DEBUG "pxa_ir: fir receive frame error\n"); + si->stats.rx_frame_errors++; + } else { + printk(KERN_DEBUG "pxa_ir: fir receive abort\n"); + si->stats.rx_errors++; + } + ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB); + } + + if (icsr0 & ICSR0_EIF) { + /* An error in FIFO occured, or there is a end of frame */ + pxa_irda_fir_irq_eif(si, dev); + } + + ICCR0 = 0; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + + return IRQ_HANDLED; +} + +/* hard_xmit interface of irda device */ +static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + int speed = irda_get_next_speed(skb); + + /* + * Does this packet contain a request to change the interface + * speed? If so, remember it until we complete the transmission + * of this frame. + */ + if (speed != si->speed && speed != -1) + si->newspeed = speed; + + /* + * If this is an empty frame, we can bypass a lot. + */ + if (skb->len == 0) { + if (si->newspeed) { + si->newspeed = 0; + pxa_irda_set_speed(si, speed); + } + dev_kfree_skb(skb); + return 0; + } + + netif_stop_queue(dev); + + if (!IS_FIR(si)) { + si->tx_buff.data = si->tx_buff.head; + si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize); + + /* Disable STUART interrupts and switch to transmit mode. */ + STIER = 0; + STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6; + + /* enable STUART and transmit interrupts */ + STIER = IER_UUE | IER_TIE; + } else { + unsigned long mtt = irda_get_mtt(skb); + + si->dma_tx_buff_len = skb->len; + memcpy(si->dma_tx_buff, skb->data, skb->len); + + if (mtt) + while ((unsigned)(OSCR - si->last_oscr)/4 < mtt) + cpu_relax(); + + /* stop RX DMA, disable FICP */ + DCSR(si->rxdma) &= ~DCSR_RUN; + ICCR0 = 0; + + pxa_irda_fir_dma_tx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_TXE; + } + + dev_kfree_skb(skb); + dev->trans_start = jiffies; + return 0; +} + +static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) +{ + struct if_irda_req *rq = (struct if_irda_req *)ifreq; + struct pxa_irda *si = netdev_priv(dev); + int ret; + + switch (cmd) { + case SIOCSBANDWIDTH: + ret = -EPERM; + if (capable(CAP_NET_ADMIN)) { + /* + * We are unable to set the speed if the + * device is not running. + */ + if (netif_running(dev)) { + ret = pxa_irda_set_speed(si, + rq->ifr_baudrate); + } else { + printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n"); + ret = 0; + } + } + break; + + case SIOCSMEDIABUSY: + ret = -EPERM; + if (capable(CAP_NET_ADMIN)) { + irda_device_set_media_busy(dev, TRUE); + ret = 0; + } + break; + + case SIOCGRECEIVING: + ret = 0; + rq->ifr_receiving = IS_FIR(si) ? 0 + : si->rx_buff.state != OUTSIDE_FRAME; + break; + + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static struct net_device_stats *pxa_irda_stats(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + return &si->stats; +} + +static void pxa_irda_startup(struct pxa_irda *si) +{ + /* Disable STUART interrupts */ + STIER = 0; + /* enable STUART interrupt to the processor */ + STMCR = MCR_OUT2; + /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */ + STLCR = LCR_WLS0 | LCR_WLS1; + /* enable FIFO, we use FIFO to improve performance */ + STFCR = FCR_TRFIFOE | FCR_ITL_32; + + /* disable FICP */ + ICCR0 = 0; + /* configure FICP ICCR2 */ + ICCR2 = ICCR2_TXP | ICCR2_TRIG_32; + + /* configure DMAC */ + DRCMR17 = si->rxdma | DRCMR_MAPVLD; + DRCMR18 = si->txdma | DRCMR_MAPVLD; + + /* force SIR reinitialization */ + si->speed = 4000000; + pxa_irda_set_speed(si, 9600); + + printk(KERN_DEBUG "pxa_ir: irda startup\n"); +} + +static void pxa_irda_shutdown(struct pxa_irda *si) +{ + unsigned long flags; + + local_irq_save(flags); + + /* disable STUART and interrupt */ + STIER = 0; + /* disable STUART SIR mode */ + STISR = 0; + /* disable the STUART clock */ + pxa_set_cken(CKEN5_STUART, 0); + + /* disable DMA */ + DCSR(si->txdma) &= ~DCSR_RUN; + DCSR(si->rxdma) &= ~DCSR_RUN; + /* disable FICP */ + ICCR0 = 0; + /* disable the FICP clock */ + pxa_set_cken(CKEN13_FICP, 0); + + DRCMR17 = 0; + DRCMR18 = 0; + + local_irq_restore(flags); + + /* power off board transceiver */ + si->pdata->transceiver_mode(si->dev, IR_OFF); + + printk(KERN_DEBUG "pxa_ir: irda shutdown\n"); +} + +static int pxa_irda_start(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + int err; + + si->speed = 9600; + + err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev); + if (err) + goto err_irq1; + + err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev); + if (err) + goto err_irq2; + + /* + * The interrupt must remain disabled for now. + */ + disable_irq(IRQ_STUART); + disable_irq(IRQ_ICP); + + err = -EBUSY; + si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev); + if (si->rxdma < 0) + goto err_rx_dma; + + si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev); + if (si->txdma < 0) + goto err_tx_dma; + + err = -ENOMEM; + si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, + &si->dma_rx_buff_phy, GFP_KERNEL ); + if (!si->dma_rx_buff) + goto err_dma_rx_buff; + + si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, + &si->dma_tx_buff_phy, GFP_KERNEL ); + if (!si->dma_tx_buff) + goto err_dma_tx_buff; + + /* Setup the serial port for the initial speed. */ + pxa_irda_startup(si); + + /* + * Open a new IrLAP layer instance. + */ + si->irlap = irlap_open(dev, &si->qos, "pxa"); + err = -ENOMEM; + if (!si->irlap) + goto err_irlap; + + /* + * Now enable the interrupt and start the queue + */ + enable_irq(IRQ_STUART); + enable_irq(IRQ_ICP); + netif_start_queue(dev); + + printk(KERN_DEBUG "pxa_ir: irda driver opened\n"); + + return 0; + +err_irlap: + pxa_irda_shutdown(si); + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); +err_dma_tx_buff: + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); +err_dma_rx_buff: + pxa_free_dma(si->txdma); +err_tx_dma: + pxa_free_dma(si->rxdma); +err_rx_dma: + free_irq(IRQ_ICP, dev); +err_irq2: + free_irq(IRQ_STUART, dev); +err_irq1: + + return err; +} + +static int pxa_irda_stop(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + + netif_stop_queue(dev); + + pxa_irda_shutdown(si); + + /* Stop IrLAP */ + if (si->irlap) { + irlap_close(si->irlap); + si->irlap = NULL; + } + + free_irq(IRQ_STUART, dev); + free_irq(IRQ_ICP, dev); + + pxa_free_dma(si->rxdma); + pxa_free_dma(si->txdma); + + if (si->dma_rx_buff) + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); + if (si->dma_tx_buff) + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); + + printk(KERN_DEBUG "pxa_ir: irda driver closed\n"); + return 0; +} + +static int pxa_irda_suspend(struct device *_dev, pm_message_t state, u32 level) +{ + struct net_device *dev = dev_get_drvdata(_dev); + struct pxa_irda *si; + + if (!dev || level != SUSPEND_DISABLE) + return 0; + + if (netif_running(dev)) { + si = netdev_priv(dev); + netif_device_detach(dev); + pxa_irda_shutdown(si); + } + + return 0; +} + +static int pxa_irda_resume(struct device *_dev, u32 level) +{ + struct net_device *dev = dev_get_drvdata(_dev); + struct pxa_irda *si; + + if (!dev || level != RESUME_ENABLE) + return 0; + + if (netif_running(dev)) { + si = netdev_priv(dev); + pxa_irda_startup(si); + netif_device_attach(dev); + netif_wake_queue(dev); + } + + return 0; +} + + +static int pxa_irda_init_iobuf(iobuff_t *io, int size) +{ + io->head = kmalloc(size, GFP_KERNEL | GFP_DMA); + if (io->head != NULL) { + io->truesize = size; + io->in_frame = FALSE; + io->state = OUTSIDE_FRAME; + io->data = io->head; + } + return io->head ? 0 : -ENOMEM; +} + +static int pxa_irda_probe(struct device *_dev) +{ + struct platform_device *pdev = to_platform_device(_dev); + struct net_device *dev; + struct pxa_irda *si; + unsigned int baudrate_mask; + int err; + + if (!pdev->dev.platform_data) + return -ENODEV; + + err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY; + if (err) + goto err_mem_1; + + err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY; + if (err) + goto err_mem_2; + + dev = alloc_irdadev(sizeof(struct pxa_irda)); + if (!dev) + goto err_mem_3; + + si = netdev_priv(dev); + si->dev = &pdev->dev; + si->pdata = pdev->dev.platform_data; + + /* + * Initialise the SIR buffers + */ + err = pxa_irda_init_iobuf(&si->rx_buff, 14384); + if (err) + goto err_mem_4; + err = pxa_irda_init_iobuf(&si->tx_buff, 4000); + if (err) + goto err_mem_5; + + dev->hard_start_xmit = pxa_irda_hard_xmit; + dev->open = pxa_irda_start; + dev->stop = pxa_irda_stop; + dev->do_ioctl = pxa_irda_ioctl; + dev->get_stats = pxa_irda_stats; + + irda_init_max_qos_capabilies(&si->qos); + + baudrate_mask = 0; + if (si->pdata->transceiver_cap & IR_SIRMODE) + baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; + if (si->pdata->transceiver_cap & IR_FIRMODE) + baudrate_mask |= IR_4000000 << 8; + + si->qos.baud_rate.bits &= baudrate_mask; + si->qos.min_turn_time.bits = 7; /* 1ms or more */ + + irda_qos_bits_to_value(&si->qos); + + err = register_netdev(dev); + + if (err == 0) + dev_set_drvdata(&pdev->dev, dev); + + if (err) { + kfree(si->tx_buff.head); +err_mem_5: + kfree(si->rx_buff.head); +err_mem_4: + free_netdev(dev); +err_mem_3: + release_mem_region(__PREG(FICP), 0x1c); +err_mem_2: + release_mem_region(__PREG(STUART), 0x24); + } +err_mem_1: + return err; +} + +static int pxa_irda_remove(struct device *_dev) +{ + struct net_device *dev = dev_get_drvdata(_dev); + + if (dev) { + struct pxa_irda *si = netdev_priv(dev); + unregister_netdev(dev); + kfree(si->tx_buff.head); + kfree(si->rx_buff.head); + free_netdev(dev); + } + + release_mem_region(__PREG(STUART), 0x24); + release_mem_region(__PREG(FICP), 0x1c); + + return 0; +} + +static struct device_driver pxa_ir_driver = { + .name = "pxa2xx-ir", + .bus = &platform_bus_type, + .probe = pxa_irda_probe, + .remove = pxa_irda_remove, + .suspend = pxa_irda_suspend, + .resume = pxa_irda_resume, +}; + +static int __init pxa_irda_init(void) +{ + return driver_register(&pxa_ir_driver); +} + +static void __exit pxa_irda_exit(void) +{ + driver_unregister(&pxa_ir_driver); +} + +module_init(pxa_irda_init); +module_exit(pxa_irda_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h new file mode 100644 index 000000000000..748406f384c2 --- /dev/null +++ b/include/asm-arm/arch-pxa/irda.h @@ -0,0 +1,17 @@ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_OFF 1 +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 + +struct pxaficp_platform_data { + int transceiver_cap; + void (*transceiver_mode)(struct device *dev, int mode); +}; + +extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); + +#endif diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 75f085dc9894..a75a2470f4f5 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1032,14 +1032,12 @@ #define ICCR0_LBM (1 << 1) /* Loopback mode */ #define ICCR0_ITR (1 << 0) /* IrDA transmission */ -#ifdef CONFIG_PXA27x #define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ #define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ #define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ #define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ #define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ #define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ -#endif #ifdef CONFIG_PXA27x #define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ -- cgit v1.2.3 From 475172fb18853c31c24a8519b06a3bd5712b2cfe Mon Sep 17 00:00:00 2001 From: "Ed L. Cashin" Date: Thu, 29 Sep 2005 12:47:40 -0400 Subject: [PATCH] aoe: use get_unaligned for accesses in ATA id buffer Signed-off-by: "Ed L. Cashin" Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman Use get_unaligned for possibly-unaligned multi-byte accesses to the ATA device identify response buffer. --- drivers/block/aoe/aoecmd.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index b5be4b7d7b5b..5c9c7c1a3d4c 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "aoe.h" #define TIMERTICK (HZ / 10) @@ -311,16 +312,16 @@ ataid_complete(struct aoedev *d, unsigned char *id) u16 n; /* word 83: command set supported */ - n = le16_to_cpup((__le16 *) &id[83<<1]); + n = le16_to_cpu(get_unaligned((__le16 *) &id[83<<1])); /* word 86: command set/feature enabled */ - n |= le16_to_cpup((__le16 *) &id[86<<1]); + n |= le16_to_cpu(get_unaligned((__le16 *) &id[86<<1])); if (n & (1<<10)) { /* bit 10: LBA 48 */ d->flags |= DEVFL_EXT; /* word 100: number lba48 sectors */ - ssize = le64_to_cpup((__le64 *) &id[100<<1]); + ssize = le64_to_cpu(get_unaligned((__le64 *) &id[100<<1])); /* set as in ide-disk.c:init_idedisk_capacity */ d->geo.cylinders = ssize; @@ -331,12 +332,12 @@ ataid_complete(struct aoedev *d, unsigned char *id) d->flags &= ~DEVFL_EXT; /* number lba28 sectors */ - ssize = le32_to_cpup((__le32 *) &id[60<<1]); + ssize = le32_to_cpu(get_unaligned((__le32 *) &id[60<<1])); /* NOTE: obsolete in ATA 6 */ - d->geo.cylinders = le16_to_cpup((__le16 *) &id[54<<1]); - d->geo.heads = le16_to_cpup((__le16 *) &id[55<<1]); - d->geo.sectors = le16_to_cpup((__le16 *) &id[56<<1]); + d->geo.cylinders = le16_to_cpu(get_unaligned((__le16 *) &id[54<<1])); + d->geo.heads = le16_to_cpu(get_unaligned((__le16 *) &id[55<<1])); + d->geo.sectors = le16_to_cpu(get_unaligned((__le16 *) &id[56<<1])); } d->ssize = ssize; d->geo.start = 0; -- cgit v1.2.3 From 3dc7c555636e46bb64b4da3570a345f4b247eaf0 Mon Sep 17 00:00:00 2001 From: "Ed L. Cashin" Date: Thu, 29 Sep 2005 12:47:55 -0400 Subject: [PATCH] aoe: update to version 14 Signed-off-by: "Ed L. Cashin" Signed-off-by: Greg Kroah-Hartman Update driver version number to 14. --- drivers/block/aoe/aoe.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h index 0e9e586e9ba3..881c48d941b7 100644 --- a/drivers/block/aoe/aoe.h +++ b/drivers/block/aoe/aoe.h @@ -1,5 +1,5 @@ /* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */ -#define VERSION "12" +#define VERSION "14" #define AOE_MAJOR 152 #define DEVICE_NAME "aoe" -- cgit v1.2.3 From d5dee80ad69439ad8dccf8fa4d7fed0068aec9cf Mon Sep 17 00:00:00 2001 From: Will Dyson Date: Fri, 16 Sep 2005 02:55:07 -0700 Subject: [PATCH] add sysfs support for ide tape I was recently given an old Travan tape drive and asked to do something useful with it. The ide-scsi + st (+serverworks ide controller) combo results in a hard lockup of the machine which I have not had the energy to debug, so I turned to ide-tape (which seems to work). The system in question debian stable, using udev to manage /dev. The following patch to ide-tape.c allows udev to create the cdev nodes for my drive. Cc: Gadi Oxman Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/ide/ide-tape.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index ee38e6b143a4..95abe981530d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1013,6 +1013,8 @@ typedef struct ide_tape_obj { static DECLARE_MUTEX(idetape_ref_sem); +static struct class *idetape_sysfs_class; + #define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref) #define ide_tape_g(disk) \ @@ -4704,6 +4706,10 @@ static void ide_tape_release(struct kref *kref) drive->dsc_overlap = 0; drive->driver_data = NULL; + class_device_destroy(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, tape->minor)); + class_device_destroy(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, tape->minor + 128)); devfs_remove("%s/mt", drive->devfs_name); devfs_remove("%s/mtn", drive->devfs_name); devfs_unregister_tape(g->number); @@ -4878,6 +4884,11 @@ static int ide_tape_probe(struct device *dev) idetape_setup(drive, tape, minor); + class_device_create(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, minor), dev, "%s", tape->name); + class_device_create(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, minor + 128), dev, "n%s", tape->name); + devfs_mk_cdev(MKDEV(HWIF(drive)->major, minor), S_IFCHR | S_IRUGO | S_IWUGO, "%s/mt", drive->devfs_name); @@ -4903,6 +4914,7 @@ MODULE_LICENSE("GPL"); static void __exit idetape_exit (void) { driver_unregister(&idetape_driver.gen_driver); + class_destroy(idetape_sysfs_class); unregister_chrdev(IDETAPE_MAJOR, "ht"); } @@ -4911,11 +4923,33 @@ static void __exit idetape_exit (void) */ static int idetape_init (void) { + int error = 1; + idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape"); + if (IS_ERR(idetape_sysfs_class)) { + idetape_sysfs_class = NULL; + printk(KERN_ERR "Unable to create sysfs class for ide tapes\n"); + error = -EBUSY; + goto out; + } + if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) { printk(KERN_ERR "ide-tape: Failed to register character device interface\n"); - return -EBUSY; + error = -EBUSY; + goto out_free_class; } - return driver_register(&idetape_driver.gen_driver); + + error = driver_register(&idetape_driver.gen_driver); + if (error) + goto out_free_driver; + + return 0; + +out_free_driver: + driver_unregister(&idetape_driver.gen_driver); +out_free_class: + class_destroy(idetape_sysfs_class); +out: + return error; } module_init(idetape_init); -- cgit v1.2.3 From 0ac85241ebc7bf6b86ab498960cc121d53ef69ae Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Sep 2005 19:39:34 -0700 Subject: [PATCH] driver model wakeup flags This is a refresh of an earlier patch to add "wakeup" support to the PM core model. This provides per-device bus-neutral control of the use of wakeup events. * "struct device_pm_info" has two bits that are initialized as part of setting up the enclosing struct device: - "can_wakeup", reflecting hardware capabilities - "may_wakeup", the policy setting (when CONFIG_PM) * There's a writeable sysfs "wakeup" file, with one of two values: - "enabled", when the policy is to allow wakeup - "disabled", when the policy is not to allow it - "" if the device can't currently issue wakeups By default, wakeup is enabled on all devices that support it. If its driver doesn't support it ... treat it as a bug. :) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 1 + drivers/base/power/sysfs.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pm.h | 26 ++++++++++++++++- 3 files changed, 99 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 6ab73f5c799a..31109193e2c4 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -225,6 +225,7 @@ void device_initialize(struct device *dev) klist_children_put); INIT_LIST_HEAD(&dev->dma_pools); init_MUTEX(&dev->sem); + device_init_wakeup(dev, 0); } /** diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index 8d04fb435c17..89c57875f3e5 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -48,8 +48,81 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c static DEVICE_ATTR(state, 0644, state_show, state_store); +/* + * wakeup - Report/change current wakeup option for device + * + * Some devices support "wakeup" events, which are hardware signals + * used to activate devices from suspended or low power states. Such + * devices have one of three values for the sysfs power/wakeup file: + * + * + "enabled\n" to issue the events; + * + "disabled\n" not to do so; or + * + "\n" for temporary or permanent inability to issue wakeup. + * + * (For example, unconfigured USB devices can't issue wakeups.) + * + * Familiar examples of devices that can issue wakeup events include + * keyboards and mice (both PS2 and USB styles), power buttons, modems, + * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events + * will wake the entire system from a suspend state; others may just + * wake up the device (if the system as a whole is already active). + * Some wakeup events use normal IRQ lines; other use special out + * of band signaling. + * + * It is the responsibility of device drivers to enable (or disable) + * wakeup signaling as part of changing device power states, respecting + * the policy choices provided through the driver model. + * + * Devices may not be able to generate wakeup events from all power + * states. Also, the events may be ignored in some configurations; + * for example, they might need help from other devices that aren't + * active, or which may have wakeup disabled. Some drivers rely on + * wakeup events internally (unless they are disabled), keeping + * their hardware in low power modes whenever they're unused. This + * saves runtime power, without requiring system-wide sleep states. + */ + +static const char enabled[] = "enabled"; +static const char disabled[] = "disabled"; + +static ssize_t +wake_show(struct device * dev, struct device_attribute *attr, char * buf) +{ + return sprintf(buf, "%s\n", device_can_wakeup(dev) + ? (device_may_wakeup(dev) ? enabled : disabled) + : ""); +} + +static ssize_t +wake_store(struct device * dev, struct device_attribute *attr, + const char * buf, size_t n) +{ + char *cp; + int len = n; + + if (!device_can_wakeup(dev)) + return -EINVAL; + + cp = memchr(buf, '\n', n); + if (cp) + len = cp - buf; + if (len == sizeof enabled - 1 + && strncmp(buf, enabled, sizeof enabled - 1) == 0) + device_set_wakeup_enable(dev, 1); + else if (len == sizeof disabled - 1 + && strncmp(buf, disabled, sizeof disabled - 1) == 0) + device_set_wakeup_enable(dev, 0); + else + return -EINVAL; + return n; +} + +static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); + + static struct attribute * power_attrs[] = { &dev_attr_state.attr, + &dev_attr_wakeup.attr, NULL, }; static struct attribute_group pm_attr_group = { diff --git a/include/linux/pm.h b/include/linux/pm.h index 5cfb07648eca..7897cf500c51 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -219,7 +219,9 @@ typedef struct pm_message { struct dev_pm_info { pm_message_t power_state; + unsigned can_wakeup:1; #ifdef CONFIG_PM + unsigned should_wakeup:1; pm_message_t prev_state; void * saved_state; atomic_t pm_users; @@ -236,13 +238,35 @@ extern void device_resume(void); #ifdef CONFIG_PM extern int device_suspend(pm_message_t state); -#else + +#define device_set_wakeup_enable(dev,val) \ + ((dev)->power.should_wakeup = !!(val)) +#define device_may_wakeup(dev) \ + (device_can_wakeup(dev) && (dev)->power.should_wakeup) + +#else /* !CONFIG_PM */ + static inline int device_suspend(pm_message_t state) { return 0; } + +#define device_set_wakeup_enable(dev,val) do{}while(0) +#define device_may_wakeup(dev) (0) + #endif +/* changes to device_may_wakeup take effect on the next pm state change. + * by default, devices should wakeup if they can. + */ +#define device_can_wakeup(dev) \ + ((dev)->power.can_wakeup) +#define device_init_wakeup(dev,val) \ + do { \ + device_can_wakeup(dev) = !!(val); \ + device_set_wakeup_enable(dev,val); \ + } while(0) + #endif /* __KERNEL__ */ #endif /* _LINUX_PM_H */ -- cgit v1.2.3 From b94dc6b58667a73eeaf5cfd9c9e90dcd98743c5b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Sep 2005 19:39:39 -0700 Subject: [PATCH] usb device wakeup flags This patch teaches "usb_device" about the new driver model wakeup support: - It updates device wakeup capabilities when entering a configuration with the WAKEUP attribute; - During suspend processing it consults the policy bit to see whether it should enable wakeup for that device. (This resolves a FIXME to not assume the answer is always "yes"; some devices lie about supporting remote wakeup.) Support for root hubs and the HCDs is separate (and more complex). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a12cab5314e9..c3e2024c4347 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1020,9 +1020,15 @@ void usb_set_device_state(struct usb_device *udev, spin_lock_irqsave(&device_state_lock, flags); if (udev->state == USB_STATE_NOTATTACHED) ; /* do nothing */ - else if (new_state != USB_STATE_NOTATTACHED) + else if (new_state != USB_STATE_NOTATTACHED) { udev->state = new_state; - else + if (new_state == USB_STATE_CONFIGURED) + device_init_wakeup(&udev->dev, + (udev->actconfig->desc.bmAttributes + & USB_CONFIG_ATT_WAKEUP)); + else if (new_state != USB_STATE_SUSPENDED) + device_init_wakeup(&udev->dev, 0); + } else recursively_mark_NOTATTACHED(udev); spin_unlock_irqrestore(&device_state_lock, flags); } @@ -1546,11 +1552,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * NOTE: OTG devices may issue remote wakeup (or SRP) even when * we don't explicitly enable it here. */ - if (udev->actconfig - // && FIXME (remote wakeup enabled on this bus) - // ... currently assuming it's always appropriate - && (udev->actconfig->desc.bmAttributes - & USB_CONFIG_ATT_WAKEUP) != 0) { + if (device_may_wakeup(&udev->dev)) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, USB_DEVICE_REMOTE_WAKEUP, 0, -- cgit v1.2.3 From dbe9035d4f690c44b55d3d0f1bc193e2c3fc57fa Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:37 -0500 Subject: [PATCH] Driver core: send hotplug event before adding class interfaces Move call to kobject_hotplug() above code that adds interfaces to a class device, otherwise children's hotplug events may reach userspace first. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/class.c b/drivers/base/class.c index ce23dc8c18c5..8df58c57dd25 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -524,6 +524,8 @@ int class_device_add(struct class_device *class_dev) class_name); } + kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + /* notify any interfaces this device is now here */ if (parent) { down(&parent->sem); @@ -533,7 +535,6 @@ int class_device_add(struct class_device *class_dev) class_intf->add(class_dev); up(&parent->sem); } - kobject_hotplug(&class_dev->kobj, KOBJ_ADD); register_done: if (error && parent) -- cgit v1.2.3 From 4f5ca09e0b854a29b17401f59487664ae3b21aa4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:32 -0500 Subject: [PATCH] I2O: remove class interface I2O: remove i2o_device_class_interface misuse The intent of class interfaces was to provide different 'views' at the same object, not just run some code every time a new class device is registered. Kill interface structure, make class core register default attributes and set up sysfs links right when registering class devices. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/message/i2o/device.c | 255 +++++++++++++++++++++---------------------- 1 file changed, 122 insertions(+), 133 deletions(-) (limited to 'drivers') diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c index 21f16ba3ac38..551d582e2887 100644 --- a/drivers/message/i2o/device.c +++ b/drivers/message/i2o/device.c @@ -45,10 +45,10 @@ static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd, writel(type, &msg->body[0]); return i2o_msg_post_wait(dev->iop, m, 60); -}; +} /** - * i2o_device_claim - claim a device for use by an OSM + * i2o_device_claim - claim a device for use by an OSM * @dev: I2O device to claim * @drv: I2O driver which wants to claim the device * @@ -73,7 +73,7 @@ int i2o_device_claim(struct i2o_device *dev) up(&dev->lock); return rc; -}; +} /** * i2o_device_claim_release - release a device that the OSM is using @@ -119,7 +119,8 @@ int i2o_device_claim_release(struct i2o_device *dev) up(&dev->lock); return rc; -}; +} + /** * i2o_device_release - release the memory for a I2O device @@ -135,39 +136,62 @@ static void i2o_device_release(struct device *dev) pr_debug("i2o: device %s released\n", dev->bus_id); kfree(i2o_dev); -}; +} /** - * i2o_device_class_release - Remove I2O device attributes + * i2o_device_class_release - I2O class device release function * @cd: I2O class device which is added to the I2O device class * - * Removes attributes from the I2O device again. Also search each device - * on the controller for I2O devices which refert to this device as parent - * or user and remove this links also. + * The function is just a stub - memory will be freed when + * associated I2O device is released. */ static void i2o_device_class_release(struct class_device *cd) { - struct i2o_device *i2o_dev, *tmp; - struct i2o_controller *c; + /* empty */ +} - i2o_dev = to_i2o_device(cd->dev); - c = i2o_dev->iop; +/** + * i2o_device_class_show_class_id - Displays class id of I2O device + * @cd: class device of which the class id should be displayed + * @buf: buffer into which the class id should be printed + * + * Returns the number of bytes which are printed into the buffer. + */ +static ssize_t i2o_device_class_show_class_id(struct class_device *cd, + char *buf) +{ + struct i2o_device *dev = to_i2o_device(cd->dev); - sysfs_remove_link(&i2o_dev->device.kobj, "parent"); - sysfs_remove_link(&i2o_dev->device.kobj, "user"); + sprintf(buf, "0x%03x\n", dev->lct_data.class_id); + return strlen(buf) + 1; +} - list_for_each_entry(tmp, &c->devices, list) { - if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "parent"); - if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "user"); - } +/** + * i2o_device_class_show_tid - Displays TID of I2O device + * @cd: class device of which the TID should be displayed + * @buf: buffer into which the class id should be printed + * + * Returns the number of bytes which are printed into the buffer. + */ +static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) +{ + struct i2o_device *dev = to_i2o_device(cd->dev); + + sprintf(buf, "0x%03x\n", dev->lct_data.tid); + return strlen(buf) + 1; +} + +static struct class_device_attribute i2o_device_class_attrs[] = { + __ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, NULL), + __ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL), + __ATTR_NULL }; /* I2O device class */ static struct class i2o_device_class = { - .name = "i2o_device", - .release = i2o_device_class_release + .name = "i2o_device", + .release = i2o_device_class_release, + .class_dev_attrs = i2o_device_class_attrs, }; /** @@ -197,7 +221,67 @@ static struct i2o_device *i2o_device_alloc(void) dev->classdev.dev = &dev->device; return dev; -}; +} + +/** + * i2o_setup_sysfs_links - Adds attributes to the I2O device + * @cd: I2O class device which is added to the I2O device class + * + * This function get called when a I2O device is added to the class. It + * creates the attributes for each device and creates user/parent symlink + * if necessary. + * + * Returns 0 on success or negative error code on failure. + */ +static void i2o_setup_sysfs_links(struct i2o_device *i2o_dev) +{ + struct i2o_controller *c = i2o_dev->iop; + struct i2o_device *tmp; + + /* create user entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); + if (tmp && tmp != i2o_dev) + sysfs_create_link(&i2o_dev->device.kobj, + &tmp->device.kobj, "user"); + + /* create user entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid && + tmp != i2o_dev) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "user"); + + /* create parent entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); + if (tmp && tmp != i2o_dev) + sysfs_create_link(&i2o_dev->device.kobj, + &tmp->device.kobj, "parent"); + + /* create parent entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid && + tmp != i2o_dev) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "parent"); +} + +static void i2o_remove_sysfs_links(struct i2o_device *i2o_dev) +{ + struct i2o_controller *c = i2o_dev->iop; + struct i2o_device *tmp; + + sysfs_remove_link(&i2o_dev->device.kobj, "parent"); + sysfs_remove_link(&i2o_dev->device.kobj, "user"); + + list_for_each_entry(tmp, &c->devices, list) { + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "parent"); + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "user"); + } +} + + /** * i2o_device_add - allocate a new I2O device and add it to the IOP @@ -222,6 +306,7 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, } dev->lct_data = *entry; + dev->iop = c; snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, dev->lct_data.tid); @@ -229,7 +314,6 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit, dev->lct_data.tid); - dev->iop = c; dev->device.parent = &c->device; device_register(&dev->device); @@ -238,12 +322,14 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, class_device_register(&dev->classdev); + i2o_setup_sysfs_links(dev); + i2o_driver_notify_device_add_all(dev); pr_debug("i2o: device %s added\n", dev->device.bus_id); return dev; -}; +} /** * i2o_device_remove - remove an I2O device from the I2O core @@ -256,10 +342,11 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, void i2o_device_remove(struct i2o_device *i2o_dev) { i2o_driver_notify_device_remove_all(i2o_dev); + i2o_remove_sysfs_links(i2o_dev); class_device_unregister(&i2o_dev->classdev); list_del(&i2o_dev->list); device_unregister(&i2o_dev->device); -}; +} /** * i2o_device_parse_lct - Parse a previously fetched LCT and create devices @@ -337,99 +424,8 @@ int i2o_device_parse_lct(struct i2o_controller *c) up(&c->lct_lock); return 0; -}; - -/** - * i2o_device_class_show_class_id - Displays class id of I2O device - * @cd: class device of which the class id should be displayed - * @buf: buffer into which the class id should be printed - * - * Returns the number of bytes which are printed into the buffer. - */ -static ssize_t i2o_device_class_show_class_id(struct class_device *cd, - char *buf) -{ - struct i2o_device *dev = to_i2o_device(cd->dev); - - sprintf(buf, "0x%03x\n", dev->lct_data.class_id); - return strlen(buf) + 1; -}; - -/** - * i2o_device_class_show_tid - Displays TID of I2O device - * @cd: class device of which the TID should be displayed - * @buf: buffer into which the class id should be printed - * - * Returns the number of bytes which are printed into the buffer. - */ -static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) -{ - struct i2o_device *dev = to_i2o_device(cd->dev); - - sprintf(buf, "0x%03x\n", dev->lct_data.tid); - return strlen(buf) + 1; -}; - -/* I2O device class attributes */ -static CLASS_DEVICE_ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, - NULL); -static CLASS_DEVICE_ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL); - -/** - * i2o_device_class_add - Adds attributes to the I2O device - * @cd: I2O class device which is added to the I2O device class - * - * This function get called when a I2O device is added to the class. It - * creates the attributes for each device and creates user/parent symlink - * if necessary. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_device_class_add(struct class_device *cd) -{ - struct i2o_device *i2o_dev, *tmp; - struct i2o_controller *c; - - i2o_dev = to_i2o_device(cd->dev); - c = i2o_dev->iop; - - class_device_create_file(cd, &class_device_attr_class_id); - class_device_create_file(cd, &class_device_attr_tid); - - /* create user entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); - if (tmp && (tmp != i2o_dev)) - sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, - "user"); - - /* create user entries refering to this device */ - list_for_each_entry(tmp, &c->devices, list) - if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - && (tmp != i2o_dev)) - sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "user"); - - /* create parent entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); - if (tmp && (tmp != i2o_dev)) - sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, - "parent"); - - /* create parent entries refering to this device */ - list_for_each_entry(tmp, &c->devices, list) - if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - && (tmp != i2o_dev)) - sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "parent"); - - return 0; -}; +} -/* I2O device class interface */ -static struct class_interface i2o_device_class_interface = { - .class = &i2o_device_class, - .add = i2o_device_class_add -}; /* * Run time support routines @@ -553,11 +549,11 @@ int i2o_parm_field_get(struct i2o_device *i2o_dev, int group, int field, } /* - * if oper == I2O_PARAMS_TABLE_GET, get from all rows - * if fieldcount == -1 return all fields + * if oper == I2O_PARAMS_TABLE_GET, get from all rows + * if fieldcount == -1 return all fields * ibuf and ibuflen are unused (use NULL, 0) - * else return specific fields - * ibuf contains fieldindexes + * else return specific fields + * ibuf contains fieldindexes * * if oper == I2O_PARAMS_LIST_GET, get from specific rows * if fieldcount == -1 return all fields @@ -611,14 +607,8 @@ int i2o_parm_table_get(struct i2o_device *dev, int oper, int group, */ int i2o_device_init(void) { - int rc; - - rc = class_register(&i2o_device_class); - if (rc) - return rc; - - return class_interface_register(&i2o_device_class_interface); -}; + return class_register(&i2o_device_class); +} /** * i2o_device_exit - I2O devices exit function @@ -627,9 +617,8 @@ int i2o_device_init(void) */ void i2o_device_exit(void) { - class_interface_register(&i2o_device_class_interface); class_unregister(&i2o_device_class); -}; +} EXPORT_SYMBOL(i2o_device_claim); EXPORT_SYMBOL(i2o_device_claim_release); -- cgit v1.2.3 From 607cf4d9aa1d766890f42fc892d39d48cf6d6c16 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] I2O: Clean up some pretty bad driver model abuses in the i2o code Signed-off-by: Greg Kroah-Hartman --- drivers/message/i2o/iop.c | 22 ++++++++++------------ include/linux/i2o.h | 2 +- 2 files changed, 11 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 42f8b810d6e5..15deb45ce995 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -833,6 +833,7 @@ void i2o_iop_remove(struct i2o_controller *c) list_for_each_entry_safe(dev, tmp, &c->devices, list) i2o_device_remove(dev); + class_device_unregister(c->classdev); device_del(&c->device); /* Ask the IOP to switch to RESET state */ @@ -1077,9 +1078,7 @@ static void i2o_iop_release(struct device *dev) }; /* I2O controller class */ -static struct class i2o_controller_class = { - .name = "i2o_controller", -}; +static struct class *i2o_controller_class; /** * i2o_iop_alloc - Allocate and initialize a i2o_controller struct @@ -1110,14 +1109,10 @@ struct i2o_controller *i2o_iop_alloc(void) sprintf(c->name, "iop%d", c->unit); device_initialize(&c->device); - class_device_initialize(&c->classdev); c->device.release = &i2o_iop_release; - c->classdev.class = &i2o_controller_class; - c->classdev.dev = &c->device; snprintf(c->device.bus_id, BUS_ID_SIZE, "iop%d", c->unit); - snprintf(c->classdev.class_id, BUS_ID_SIZE, "iop%d", c->unit); #if BITS_PER_LONG == 64 spin_lock_init(&c->context_list_lock); @@ -1146,7 +1141,9 @@ int i2o_iop_add(struct i2o_controller *c) goto iop_reset; } - if ((rc = class_device_add(&c->classdev))) { + c->classdev = class_device_create(i2o_controller_class, 0, + &c->device, "iop%d", c->unit); + if (IS_ERR(c->classdev)) { osm_err("%s: could not add controller class\n", c->name); goto device_del; } @@ -1184,7 +1181,7 @@ int i2o_iop_add(struct i2o_controller *c) return 0; class_del: - class_device_del(&c->classdev); + class_device_unregister(c->classdev); device_del: device_del(&c->device); @@ -1250,7 +1247,8 @@ static int __init i2o_iop_init(void) if (rc) goto exit; - if ((rc = class_register(&i2o_controller_class))) { + i2o_controller_class = class_create(THIS_MODULE, "i2o_controller"); + if (IS_ERR(i2o_controller_class)) { osm_err("can't register class i2o_controller\n"); goto device_exit; } @@ -1273,7 +1271,7 @@ static int __init i2o_iop_init(void) i2o_driver_exit(); class_exit: - class_unregister(&i2o_controller_class); + class_destroy(i2o_controller_class); device_exit: i2o_device_exit(); @@ -1292,7 +1290,7 @@ static void __exit i2o_iop_exit(void) i2o_pci_exit(); i2o_exec_exit(); i2o_driver_exit(); - class_unregister(&i2o_controller_class); + class_destroy(i2o_controller_class); i2o_device_exit(); }; diff --git a/include/linux/i2o.h b/include/linux/i2o.h index bdc286ec947c..694ea298d4bc 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -194,7 +194,7 @@ struct i2o_controller { struct resource mem_resource; /* Mem resource allocated to the IOP */ struct device device; - struct class_device classdev; /* I2O controller class */ + struct class_device *classdev; /* I2O controller class device */ struct i2o_device *exec; /* Executive */ #if BITS_PER_LONG == 64 spinlock_t context_list_lock; /* lock for context_list */ -- cgit v1.2.3 From 7bd7b091429705eb281d60c553cc643aada8045a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 29 Sep 2005 00:40:07 -0500 Subject: [PATCH] I2O: remove i2o_device_class I2O: cleanup - remove i2o_device_class I2O devices reside on their own bus so there should be no reason to also have i2c_device class that mirros i2o bus. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/message/i2o/core.h | 3 -- drivers/message/i2o/device.c | 71 ++++++++------------------------------------ drivers/message/i2o/driver.c | 3 ++ drivers/message/i2o/iop.c | 10 +------ include/linux/i2o.h | 2 -- 5 files changed, 17 insertions(+), 72 deletions(-) (limited to 'drivers') diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h index c5bcfd70f711..9eefedb16211 100644 --- a/drivers/message/i2o/core.h +++ b/drivers/message/i2o/core.h @@ -36,9 +36,6 @@ extern void __exit i2o_pci_exit(void); extern void i2o_device_remove(struct i2o_device *); extern int i2o_device_parse_lct(struct i2o_controller *); -extern int i2o_device_init(void); -extern void i2o_device_exit(void); - /* IOP */ extern struct i2o_controller *i2o_iop_alloc(void); extern void i2o_iop_free(struct i2o_controller *); diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c index 551d582e2887..d9879965eb50 100644 --- a/drivers/message/i2o/device.c +++ b/drivers/message/i2o/device.c @@ -138,17 +138,6 @@ static void i2o_device_release(struct device *dev) kfree(i2o_dev); } -/** - * i2o_device_class_release - I2O class device release function - * @cd: I2O class device which is added to the I2O device class - * - * The function is just a stub - memory will be freed when - * associated I2O device is released. - */ -static void i2o_device_class_release(struct class_device *cd) -{ - /* empty */ -} /** * i2o_device_class_show_class_id - Displays class id of I2O device @@ -157,12 +146,13 @@ static void i2o_device_class_release(struct class_device *cd) * * Returns the number of bytes which are printed into the buffer. */ -static ssize_t i2o_device_class_show_class_id(struct class_device *cd, - char *buf) +static ssize_t i2o_device_show_class_id(struct device *dev, + struct device_attribute *attr, + char *buf) { - struct i2o_device *dev = to_i2o_device(cd->dev); + struct i2o_device *i2o_dev = to_i2o_device(dev); - sprintf(buf, "0x%03x\n", dev->lct_data.class_id); + sprintf(buf, "0x%03x\n", i2o_dev->lct_data.class_id); return strlen(buf) + 1; } @@ -173,27 +163,22 @@ static ssize_t i2o_device_class_show_class_id(struct class_device *cd, * * Returns the number of bytes which are printed into the buffer. */ -static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) +static ssize_t i2o_device_show_tid(struct device *dev, + struct device_attribute *attr, + char *buf) { - struct i2o_device *dev = to_i2o_device(cd->dev); + struct i2o_device *i2o_dev = to_i2o_device(dev); - sprintf(buf, "0x%03x\n", dev->lct_data.tid); + sprintf(buf, "0x%03x\n", i2o_dev->lct_data.tid); return strlen(buf) + 1; } -static struct class_device_attribute i2o_device_class_attrs[] = { - __ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, NULL), - __ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL), +struct device_attribute i2o_device_attrs[] = { + __ATTR(class_id, S_IRUGO, i2o_device_show_class_id, NULL), + __ATTR(tid, S_IRUGO, i2o_device_show_tid, NULL), __ATTR_NULL }; -/* I2O device class */ -static struct class i2o_device_class = { - .name = "i2o_device", - .release = i2o_device_class_release, - .class_dev_attrs = i2o_device_class_attrs, -}; - /** * i2o_device_alloc - Allocate a I2O device and initialize it * @@ -217,8 +202,6 @@ static struct i2o_device *i2o_device_alloc(void) dev->device.bus = &i2o_bus_type; dev->device.release = &i2o_device_release; - dev->classdev.class = &i2o_device_class; - dev->classdev.dev = &dev->device; return dev; } @@ -311,17 +294,12 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, dev->lct_data.tid); - snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit, - dev->lct_data.tid); - dev->device.parent = &c->device; device_register(&dev->device); list_add_tail(&dev->list, &c->devices); - class_device_register(&dev->classdev); - i2o_setup_sysfs_links(dev); i2o_driver_notify_device_add_all(dev); @@ -343,7 +321,6 @@ void i2o_device_remove(struct i2o_device *i2o_dev) { i2o_driver_notify_device_remove_all(i2o_dev); i2o_remove_sysfs_links(i2o_dev); - class_device_unregister(&i2o_dev->classdev); list_del(&i2o_dev->list); device_unregister(&i2o_dev->device); } @@ -598,28 +575,6 @@ int i2o_parm_table_get(struct i2o_device *dev, int oper, int group, return size; } -/** - * i2o_device_init - Initialize I2O devices - * - * Registers the I2O device class. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_device_init(void) -{ - return class_register(&i2o_device_class); -} - -/** - * i2o_device_exit - I2O devices exit function - * - * Unregisters the I2O device class. - */ -void i2o_device_exit(void) -{ - class_unregister(&i2o_device_class); -} - EXPORT_SYMBOL(i2o_device_claim); EXPORT_SYMBOL(i2o_device_claim_release); EXPORT_SYMBOL(i2o_parm_field_get); diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c index 739bfdef0c6d..0079a4be0af2 100644 --- a/drivers/message/i2o/driver.c +++ b/drivers/message/i2o/driver.c @@ -58,9 +58,12 @@ static int i2o_bus_match(struct device *dev, struct device_driver *drv) }; /* I2O bus type */ +extern struct device_attribute i2o_device_attrs[]; + struct bus_type i2o_bus_type = { .name = "i2o", .match = i2o_bus_match, + .dev_attrs = i2o_device_attrs, }; /** diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 15deb45ce995..176fb573ea26 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -1243,14 +1243,10 @@ static int __init i2o_iop_init(void) printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - rc = i2o_device_init(); - if (rc) - goto exit; - i2o_controller_class = class_create(THIS_MODULE, "i2o_controller"); if (IS_ERR(i2o_controller_class)) { osm_err("can't register class i2o_controller\n"); - goto device_exit; + goto exit; } if ((rc = i2o_driver_init())) @@ -1273,9 +1269,6 @@ static int __init i2o_iop_init(void) class_exit: class_destroy(i2o_controller_class); - device_exit: - i2o_device_exit(); - exit: return rc; } @@ -1291,7 +1284,6 @@ static void __exit i2o_iop_exit(void) i2o_exec_exit(); i2o_driver_exit(); class_destroy(i2o_controller_class); - i2o_device_exit(); }; module_init(i2o_iop_init); diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 694ea298d4bc..84db8f6ae7e5 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -66,8 +66,6 @@ struct i2o_device { struct device device; struct semaphore lock; /* device lock */ - - struct class_device classdev; /* i2o device class */ }; /* -- cgit v1.2.3 From d8539d81aeee4dbdc0624a798321e822fb2df7ae Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:36 -0500 Subject: [PATCH] Driver core: pass interface to class interface methods Driver core: pass interface to class intreface methods Pass interface as argument to add() and remove() class interface methods. This way a subsystem can implement generic add/remove handlers and then call interface-specific ones. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 8 ++++---- drivers/pcmcia/ds.c | 6 ++++-- drivers/pcmcia/rsrc_nonstatic.c | 6 ++++-- drivers/pcmcia/socket_sysfs.c | 6 ++++-- drivers/scsi/sg.c | 8 ++++---- include/linux/device.h | 4 ++-- 6 files changed, 22 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/base/class.c b/drivers/base/class.c index 8df58c57dd25..73d44cf53db0 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -532,7 +532,7 @@ int class_device_add(struct class_device *class_dev) list_add_tail(&class_dev->node, &parent->children); list_for_each_entry(class_intf, &parent->interfaces, node) if (class_intf->add) - class_intf->add(class_dev); + class_intf->add(class_dev, class_intf); up(&parent->sem); } @@ -612,7 +612,7 @@ void class_device_del(struct class_device *class_dev) list_del_init(&class_dev->node); list_for_each_entry(class_intf, &parent->interfaces, node) if (class_intf->remove) - class_intf->remove(class_dev); + class_intf->remove(class_dev, class_intf); up(&parent->sem); } @@ -729,7 +729,7 @@ int class_interface_register(struct class_interface *class_intf) list_add_tail(&class_intf->node, &parent->interfaces); if (class_intf->add) { list_for_each_entry(class_dev, &parent->children, node) - class_intf->add(class_dev); + class_intf->add(class_dev, class_intf); } up(&parent->sem); @@ -748,7 +748,7 @@ void class_interface_unregister(struct class_interface *class_intf) list_del_init(&class_intf->node); if (class_intf->remove) { list_for_each_entry(class_dev, &parent->children, node) - class_intf->remove(class_dev); + class_intf->remove(class_dev, class_intf); } up(&parent->sem); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 080608c7381a..39d096b52926 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1157,7 +1157,8 @@ static struct pcmcia_callback pcmcia_bus_callback = { .requery = pcmcia_bus_rescan, }; -static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev) +static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *socket = class_get_devdata(class_dev); int ret; @@ -1192,7 +1193,8 @@ static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev) return 0; } -static void pcmcia_bus_remove_socket(struct class_device *class_dev) +static void pcmcia_bus_remove_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *socket = class_get_devdata(class_dev); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index f9a5c70284b5..fc87e7e2b6b8 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -994,7 +994,8 @@ static struct class_device_attribute *pccard_rsrc_attributes[] = { NULL, }; -static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev) +static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *s = class_get_devdata(class_dev); struct class_device_attribute **attr; @@ -1011,7 +1012,8 @@ static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev) return ret; } -static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev) +static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *s = class_get_devdata(class_dev); struct class_device_attribute **attr; diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index 1040a6c1a8a4..4a3150a7854c 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -341,7 +341,8 @@ static struct bin_attribute pccard_cis_attr = { .write = pccard_store_cis, }; -static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev) +static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct class_device_attribute **attr; int ret = 0; @@ -357,7 +358,8 @@ static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev) return ret; } -static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev) +static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct class_device_attribute **attr; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index ad94367df430..f0d8b4eda5ad 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -104,8 +104,8 @@ static int sg_allow_dio = SG_ALLOW_DIO_DEF; #define SG_DEV_ARR_LUMP 32 /* amount to over allocate sg_dev_arr by */ -static int sg_add(struct class_device *); -static void sg_remove(struct class_device *); +static int sg_add(struct class_device *, struct class_interface *); +static void sg_remove(struct class_device *, struct class_interface *); static Scsi_Request *dummy_cmdp; /* only used for sizeof */ @@ -1506,7 +1506,7 @@ static int sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) } static int -sg_add(struct class_device *cl_dev) +sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) { struct scsi_device *scsidp = to_scsi_device(cl_dev->dev); struct gendisk *disk; @@ -1582,7 +1582,7 @@ out: } static void -sg_remove(struct class_device *cl_dev) +sg_remove(struct class_device *cl_dev, struct class_interface *cl_intf) { struct scsi_device *scsidp = to_scsi_device(cl_dev->dev); Sg_device *sdp = NULL; diff --git a/include/linux/device.h b/include/linux/device.h index 95d607a48f06..a53a822c4d16 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -251,8 +251,8 @@ struct class_interface { struct list_head node; struct class *class; - int (*add) (struct class_device *); - void (*remove) (struct class_device *); + int (*add) (struct class_device *, struct class_interface *); + void (*remove) (struct class_device *, struct class_interface *); }; extern int class_interface_register(struct class_interface *); -- cgit v1.2.3 From a7fd67062efc5b0fc9a61368c607fa92d1d57f9e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 1 Oct 2005 14:49:43 +0200 Subject: [PATCH] add sysfs attr to re-emit device hotplug event A "coldplug + udevstart" can be simple like this: for i in /sys/block/*/*/uevent; do echo 1 > $i; done for i in /sys/class/*/*/uevent; do echo 1 > $i; done for i in /sys/bus/*/devices/*/uevent; do echo 1 > $i; done Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 16 ++++++++++++-- drivers/base/core.c | 16 ++++++++++++++ drivers/block/genhd.c | 25 ++++++++++++++++++++++ fs/partitions/check.c | 27 +++++++++++++++++++++++- include/linux/device.h | 57 +++++++++++++++++++++++++------------------------- include/linux/genhd.h | 1 + 6 files changed, 110 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/base/class.c b/drivers/base/class.c index 73d44cf53db0..3cf6eb36f3d8 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -442,6 +442,13 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf) return print_dev_t(buf, class_dev->devt); } +static ssize_t store_uevent(struct class_device *class_dev, + const char *buf, size_t count) +{ + kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + return count; +} + void class_device_initialize(struct class_device *class_dev) { kobj_set_kset_s(class_dev, class_obj_subsys); @@ -497,6 +504,12 @@ int class_device_add(struct class_device *class_dev) goto register_done; /* add the needed attributes to this device */ + class_dev->uevent_attr.attr.name = "uevent"; + class_dev->uevent_attr.attr.mode = S_IWUSR; + class_dev->uevent_attr.attr.owner = parent->owner; + class_dev->uevent_attr.store = store_uevent; + class_device_create_file(class_dev, &class_dev->uevent_attr); + if (MAJOR(class_dev->devt)) { struct class_device_attribute *attr; attr = kzalloc(sizeof(*attr), GFP_KERNEL); @@ -505,12 +518,10 @@ int class_device_add(struct class_device *class_dev) kobject_del(&class_dev->kobj); goto register_done; } - attr->attr.name = "dev"; attr->attr.mode = S_IRUGO; attr->attr.owner = parent->owner; attr->show = show_dev; - attr->store = NULL; class_device_create_file(class_dev, attr); class_dev->devt_attr = attr; } @@ -621,6 +632,7 @@ void class_device_del(struct class_device *class_dev) sysfs_remove_link(&class_dev->kobj, "device"); sysfs_remove_link(&class_dev->dev->kobj, class_name); } + class_device_remove_file(class_dev, &class_dev->uevent_attr); if (class_dev->devt_attr) class_device_remove_file(class_dev, class_dev->devt_attr); class_device_remove_attrs(class_dev); diff --git a/drivers/base/core.c b/drivers/base/core.c index 31109193e2c4..ac4b5fdd95f5 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -154,6 +154,13 @@ static struct kset_hotplug_ops device_hotplug_ops = { .hotplug = dev_hotplug, }; +static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + kobject_hotplug(&dev->kobj, KOBJ_ADD); + return count; +} + /** * device_subsys - structure to be registered with kobject core. */ @@ -259,6 +266,14 @@ int device_add(struct device *dev) if ((error = kobject_add(&dev->kobj))) goto Error; + + dev->uevent_attr.attr.name = "uevent"; + dev->uevent_attr.attr.mode = S_IWUSR; + if (dev->driver) + dev->uevent_attr.attr.owner = dev->driver->owner; + dev->uevent_attr.store = store_uevent; + device_create_file(dev, &dev->uevent_attr); + kobject_hotplug(&dev->kobj, KOBJ_ADD); if ((error = device_pm_add(dev))) goto PMError; @@ -350,6 +365,7 @@ void device_del(struct device * dev) if (parent) klist_del(&dev->knode_parent); + device_remove_file(dev, &dev->uevent_attr); /* Notify the platform of the removal, in case they * need to do anything... diff --git a/drivers/block/genhd.c b/drivers/block/genhd.c index d42840cc0d1d..486ce1fdeb8c 100644 --- a/drivers/block/genhd.c +++ b/drivers/block/genhd.c @@ -337,10 +337,30 @@ static ssize_t disk_attr_show(struct kobject *kobj, struct attribute *attr, return ret; } +static ssize_t disk_attr_store(struct kobject * kobj, struct attribute * attr, + const char *page, size_t count) +{ + struct gendisk *disk = to_disk(kobj); + struct disk_attribute *disk_attr = + container_of(attr,struct disk_attribute,attr); + ssize_t ret = 0; + + if (disk_attr->store) + ret = disk_attr->store(disk, page, count); + return ret; +} + static struct sysfs_ops disk_sysfs_ops = { .show = &disk_attr_show, + .store = &disk_attr_store, }; +static ssize_t disk_uevent_store(struct gendisk * disk, + const char *buf, size_t count) +{ + kobject_hotplug(&disk->kobj, KOBJ_ADD); + return count; +} static ssize_t disk_dev_read(struct gendisk * disk, char *page) { dev_t base = MKDEV(disk->major, disk->first_minor); @@ -382,6 +402,10 @@ static ssize_t disk_stats_read(struct gendisk * disk, char *page) jiffies_to_msecs(disk_stat_read(disk, io_ticks)), jiffies_to_msecs(disk_stat_read(disk, time_in_queue))); } +static struct disk_attribute disk_attr_uevent = { + .attr = {.name = "uevent", .mode = S_IWUSR }, + .store = disk_uevent_store +}; static struct disk_attribute disk_attr_dev = { .attr = {.name = "dev", .mode = S_IRUGO }, .show = disk_dev_read @@ -404,6 +428,7 @@ static struct disk_attribute disk_attr_stat = { }; static struct attribute * default_attrs[] = { + &disk_attr_uevent.attr, &disk_attr_dev.attr, &disk_attr_range.attr, &disk_attr_removable.attr, diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 77e178f13162..d95a110293fa 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -192,6 +192,7 @@ check_partition(struct gendisk *hd, struct block_device *bdev) struct part_attribute { struct attribute attr; ssize_t (*show)(struct hd_struct *,char *); + ssize_t (*store)(struct hd_struct *,const char *, size_t); }; static ssize_t @@ -201,14 +202,33 @@ part_attr_show(struct kobject * kobj, struct attribute * attr, char * page) struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr); ssize_t ret = 0; if (part_attr->show) - ret = part_attr->show(p,page); + ret = part_attr->show(p, page); + return ret; +} +static ssize_t +part_attr_store(struct kobject * kobj, struct attribute * attr, + const char *page, size_t count) +{ + struct hd_struct * p = container_of(kobj,struct hd_struct,kobj); + struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr); + ssize_t ret = 0; + + if (part_attr->store) + ret = part_attr->store(p, page, count); return ret; } static struct sysfs_ops part_sysfs_ops = { .show = part_attr_show, + .store = part_attr_store, }; +static ssize_t part_uevent_store(struct hd_struct * p, + const char *page, size_t count) +{ + kobject_hotplug(&p->kobj, KOBJ_ADD); + return count; +} static ssize_t part_dev_read(struct hd_struct * p, char *page) { struct gendisk *disk = container_of(p->kobj.parent,struct gendisk,kobj); @@ -229,6 +249,10 @@ static ssize_t part_stat_read(struct hd_struct * p, char *page) p->reads, (unsigned long long)p->read_sectors, p->writes, (unsigned long long)p->write_sectors); } +static struct part_attribute part_attr_uevent = { + .attr = {.name = "uevent", .mode = S_IWUSR }, + .store = part_uevent_store +}; static struct part_attribute part_attr_dev = { .attr = {.name = "dev", .mode = S_IRUGO }, .show = part_dev_read @@ -247,6 +271,7 @@ static struct part_attribute part_attr_stat = { }; static struct attribute * default_attrs[] = { + &part_attr_uevent.attr, &part_attr_dev.attr, &part_attr_start.attr, &part_attr_size.attr, diff --git a/include/linux/device.h b/include/linux/device.h index a53a822c4d16..e86a580b72e1 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -190,6 +190,18 @@ struct class_attribute class_attr_##_name = __ATTR(_name,_mode,_show,_store) extern int class_create_file(struct class *, const struct class_attribute *); extern void class_remove_file(struct class *, const struct class_attribute *); +struct class_device_attribute { + struct attribute attr; + ssize_t (*show)(struct class_device *, char * buf); + ssize_t (*store)(struct class_device *, const char * buf, size_t count); +}; + +#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \ +struct class_device_attribute class_device_attr_##_name = \ + __ATTR(_name,_mode,_show,_store) + +extern int class_device_create_file(struct class_device *, + const struct class_device_attribute *); struct class_device { struct list_head node; @@ -198,6 +210,7 @@ struct class_device { struct class * class; /* required */ dev_t devt; /* dev_t, creates the sysfs "dev" */ struct class_device_attribute *devt_attr; + struct class_device_attribute uevent_attr; struct device * dev; /* not necessary, but nice to have */ void * class_data; /* class-specific data */ @@ -228,18 +241,6 @@ extern int class_device_rename(struct class_device *, char *); extern struct class_device * class_device_get(struct class_device *); extern void class_device_put(struct class_device *); -struct class_device_attribute { - struct attribute attr; - ssize_t (*show)(struct class_device *, char * buf); - ssize_t (*store)(struct class_device *, const char * buf, size_t count); -}; - -#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \ -struct class_device_attribute class_device_attr_##_name = \ - __ATTR(_name,_mode,_show,_store) - -extern int class_device_create_file(struct class_device *, - const struct class_device_attribute *); extern void class_device_remove_file(struct class_device *, const struct class_device_attribute *); extern int class_device_create_bin_file(struct class_device *, @@ -266,6 +267,20 @@ extern struct class_device *class_device_create(struct class *cls, dev_t devt, extern void class_device_destroy(struct class *cls, dev_t devt); +/* interface for exporting device attributes */ +struct device_attribute { + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); +}; + +#define DEVICE_ATTR(_name,_mode,_show,_store) \ +struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store) + +extern int device_create_file(struct device *device, struct device_attribute * entry); +extern void device_remove_file(struct device * dev, struct device_attribute * attr); struct device { struct klist klist_children; struct klist_node knode_parent; /* node in sibling list */ @@ -275,6 +290,7 @@ struct device { struct kobject kobj; char bus_id[BUS_ID_SIZE]; /* position on parent bus */ + struct device_attribute uevent_attr; struct semaphore sem; /* semaphore to synchronize calls to * its driver. @@ -343,23 +359,6 @@ extern int device_attach(struct device * dev); extern void driver_attach(struct device_driver * drv); -/* driverfs interface for exporting device attributes */ - -struct device_attribute { - struct attribute attr; - ssize_t (*show)(struct device *dev, struct device_attribute *attr, - char *buf); - ssize_t (*store)(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count); -}; - -#define DEVICE_ATTR(_name,_mode,_show,_store) \ -struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store) - - -extern int device_create_file(struct device *device, struct device_attribute * entry); -extern void device_remove_file(struct device * dev, struct device_attribute * attr); - /* * Platform "fixup" functions - allow the platform to have their say * about devices and actions that the general device layer doesn't diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 01796c41c951..78af34840c69 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -132,6 +132,7 @@ struct gendisk { struct disk_attribute { struct attribute attr; ssize_t (*show)(struct gendisk *, char *); + ssize_t (*store)(struct gendisk *, const char *, size_t); }; /* -- cgit v1.2.3 From 51d172d5f3a193e4b8f76179b2e55d7a36b94117 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] Driver Core: add the ability for class_device structures to be nested This patch allows struct class_device to be nested, so that another struct class_device can be the parent of a new one, instead of only having the struct class be the parent. This will allow us to (hopefully) fix up the input and video class subsystem mess. But please people, don't go crazy and start making huge trees of class devices, you should only need 2 levels deep to get everything to work (remember to use a class_interface to get notification of a new class device being added to the system.) Oh, this also allows us to have the possibility of potentially, someday, moving /sys/block into /sys/class. The main hindrance is that pesky /dev numberspace issue... Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 125 ++++++++++++++++++++++++++++++++----------------- include/linux/device.h | 13 +++-- 2 files changed, 91 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/base/class.c b/drivers/base/class.c index 3cf6eb36f3d8..c3e569730afe 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -99,7 +99,8 @@ struct class * class_get(struct class * cls) void class_put(struct class * cls) { - subsys_put(&cls->subsys); + if (cls) + subsys_put(&cls->subsys); } @@ -165,14 +166,25 @@ void class_unregister(struct class * cls) static void class_create_release(struct class *cls) { + pr_debug("%s called for %s\n", __FUNCTION__, cls->name); kfree(cls); } static void class_device_create_release(struct class_device *class_dev) { + pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id); kfree(class_dev); } +/* needed to allow these devices to have parent class devices */ +static int class_device_create_hotplug(struct class_device *class_dev, + char **envp, int num_envp, + char *buffer, int buffer_size) +{ + pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id); + return 0; +} + /** * class_create - create a struct class structure * @owner: pointer to the module that is to "own" this struct class @@ -301,10 +313,12 @@ static void class_dev_release(struct kobject * kobj) kfree(cd->devt_attr); cd->devt_attr = NULL; - if (cls->release) + if (cd->release) + cd->release(cd); + else if (cls->release) cls->release(cd); else { - printk(KERN_ERR "Device class '%s' does not have a release() function, " + printk(KERN_ERR "Class Device '%s' does not have a release() function, " "it is broken and must be fixed.\n", cd->class_id); WARN_ON(1); @@ -382,14 +396,18 @@ static int class_hotplug(struct kset *kset, struct kobject *kobj, char **envp, buffer = &buffer[length]; buffer_size -= length; - if (class_dev->class->hotplug) { - /* have the bus specific function add its stuff */ - retval = class_dev->class->hotplug (class_dev, envp, num_envp, - buffer, buffer_size); - if (retval) { - pr_debug ("%s - hotplug() returned %d\n", - __FUNCTION__, retval); - } + if (class_dev->hotplug) { + /* have the class device specific function add its stuff */ + retval = class_dev->hotplug(class_dev, envp, num_envp, + buffer, buffer_size); + if (retval) + pr_debug("class_dev->hotplug() returned %d\n", retval); + } else if (class_dev->class->hotplug) { + /* have the class specific function add its stuff */ + retval = class_dev->class->hotplug(class_dev, envp, num_envp, + buffer, buffer_size); + if (retval) + pr_debug("class->hotplug() returned %d\n", retval); } return retval; @@ -476,37 +494,42 @@ static char *make_class_name(struct class_device *class_dev) int class_device_add(struct class_device *class_dev) { - struct class * parent = NULL; - struct class_interface * class_intf; + struct class *parent_class = NULL; + struct class_device *parent_class_dev = NULL; + struct class_interface *class_intf; char *class_name = NULL; - int error; + int error = -EINVAL; class_dev = class_device_get(class_dev); if (!class_dev) return -EINVAL; - if (!strlen(class_dev->class_id)) { - error = -EINVAL; + if (!strlen(class_dev->class_id)) goto register_done; - } - parent = class_get(class_dev->class); + parent_class = class_get(class_dev->class); + if (!parent_class) + goto register_done; + parent_class_dev = class_device_get(class_dev->parent); pr_debug("CLASS: registering class device: ID = '%s'\n", class_dev->class_id); /* first, register with generic layer. */ kobject_set_name(&class_dev->kobj, "%s", class_dev->class_id); - if (parent) - class_dev->kobj.parent = &parent->subsys.kset.kobj; + if (parent_class_dev) + class_dev->kobj.parent = &parent_class_dev->kobj; + else + class_dev->kobj.parent = &parent_class->subsys.kset.kobj; - if ((error = kobject_add(&class_dev->kobj))) + error = kobject_add(&class_dev->kobj); + if (error) goto register_done; /* add the needed attributes to this device */ class_dev->uevent_attr.attr.name = "uevent"; class_dev->uevent_attr.attr.mode = S_IWUSR; - class_dev->uevent_attr.attr.owner = parent->owner; + class_dev->uevent_attr.attr.owner = parent_class->owner; class_dev->uevent_attr.store = store_uevent; class_device_create_file(class_dev, &class_dev->uevent_attr); @@ -520,7 +543,7 @@ int class_device_add(struct class_device *class_dev) } attr->attr.name = "dev"; attr->attr.mode = S_IRUGO; - attr->attr.owner = parent->owner; + attr->attr.owner = parent_class->owner; attr->show = show_dev; class_device_create_file(class_dev, attr); class_dev->devt_attr = attr; @@ -538,18 +561,20 @@ int class_device_add(struct class_device *class_dev) kobject_hotplug(&class_dev->kobj, KOBJ_ADD); /* notify any interfaces this device is now here */ - if (parent) { - down(&parent->sem); - list_add_tail(&class_dev->node, &parent->children); - list_for_each_entry(class_intf, &parent->interfaces, node) + if (parent_class) { + down(&parent_class->sem); + list_add_tail(&class_dev->node, &parent_class->children); + list_for_each_entry(class_intf, &parent_class->interfaces, node) if (class_intf->add) class_intf->add(class_dev, class_intf); - up(&parent->sem); + up(&parent_class->sem); } register_done: - if (error && parent) - class_put(parent); + if (error) { + class_put(parent_class); + class_device_put(parent_class_dev); + } class_device_put(class_dev); kfree(class_name); return error; @@ -564,21 +589,28 @@ int class_device_register(struct class_device *class_dev) /** * class_device_create - creates a class device and registers it with sysfs * @cs: pointer to the struct class that this device should be registered to. + * @parent: pointer to the parent struct class_device of this new device, if any. * @dev: the dev_t for the char device to be added. * @device: a pointer to a struct device that is assiociated with this class device. * @fmt: string for the class device's name * * This function can be used by char device classes. A struct * class_device will be created in sysfs, registered to the specified - * class. A "dev" file will be created, showing the dev_t for the - * device. The pointer to the struct class_device will be returned from - * the call. Any further sysfs files that might be required can be - * created using this pointer. + * class. + * A "dev" file will be created, showing the dev_t for the device, if + * the dev_t is not 0,0. + * If a pointer to a parent struct class_device is passed in, the newly + * created struct class_device will be a child of that device in sysfs. + * The pointer to the struct class_device will be returned from the + * call. Any further sysfs files that might be required can be created + * using this pointer. * * Note: the struct class passed to this function must have previously * been created with a call to class_create(). */ -struct class_device *class_device_create(struct class *cls, dev_t devt, +struct class_device *class_device_create(struct class *cls, + struct class_device *parent, + dev_t devt, struct device *device, char *fmt, ...) { va_list args; @@ -597,6 +629,9 @@ struct class_device *class_device_create(struct class *cls, dev_t devt, class_dev->devt = devt; class_dev->dev = device; class_dev->class = cls; + class_dev->parent = parent; + class_dev->release = class_device_create_release; + class_dev->hotplug = class_device_create_hotplug; va_start(args, fmt); vsnprintf(class_dev->class_id, BUS_ID_SIZE, fmt, args); @@ -614,17 +649,18 @@ error: void class_device_del(struct class_device *class_dev) { - struct class * parent = class_dev->class; - struct class_interface * class_intf; + struct class *parent_class = class_dev->class; + struct class_device *parent_device = class_dev->parent; + struct class_interface *class_intf; char *class_name = NULL; - if (parent) { - down(&parent->sem); + if (parent_class) { + down(&parent_class->sem); list_del_init(&class_dev->node); - list_for_each_entry(class_intf, &parent->interfaces, node) + list_for_each_entry(class_intf, &parent_class->interfaces, node) if (class_intf->remove) class_intf->remove(class_dev, class_intf); - up(&parent->sem); + up(&parent_class->sem); } if (class_dev->dev) { @@ -640,8 +676,8 @@ void class_device_del(struct class_device *class_dev) kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE); kobject_del(&class_dev->kobj); - if (parent) - class_put(parent); + class_device_put(parent_device); + class_put(parent_class); kfree(class_name); } @@ -721,7 +757,8 @@ struct class_device * class_device_get(struct class_device *class_dev) void class_device_put(struct class_device *class_dev) { - kobject_put(&class_dev->kobj); + if (class_dev) + kobject_put(&class_dev->kobj); } diff --git a/include/linux/device.h b/include/linux/device.h index e86a580b72e1..226e550ae2ea 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -213,7 +213,11 @@ struct class_device { struct class_device_attribute uevent_attr; struct device * dev; /* not necessary, but nice to have */ void * class_data; /* class-specific data */ + struct class_device *parent; /* parent of this child device, if there is one */ + void (*release)(struct class_device *dev); + int (*hotplug)(struct class_device *dev, char **envp, + int num_envp, char *buffer, int buffer_size); char class_id[BUS_ID_SIZE]; /* unique to this class */ }; @@ -261,9 +265,12 @@ extern void class_interface_unregister(struct class_interface *); extern struct class *class_create(struct module *owner, char *name); extern void class_destroy(struct class *cls); -extern struct class_device *class_device_create(struct class *cls, dev_t devt, - struct device *device, char *fmt, ...) - __attribute__((format(printf,4,5))); +extern struct class_device *class_device_create(struct class *cls, + struct class_device *parent, + dev_t devt, + struct device *device, + char *fmt, ...) + __attribute__((format(printf,5,6))); extern void class_device_destroy(struct class *cls, dev_t devt); -- cgit v1.2.3 From 53f4654272df7c51064825024340554b39c9efba Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] Driver Core: fix up all callers of class_device_create() The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: Greg Kroah-Hartman --- arch/i386/kernel/cpuid.c | 2 +- arch/i386/kernel/msr.c | 2 +- drivers/block/aoe/aoechr.c | 2 +- drivers/block/paride/pg.c | 2 +- drivers/block/paride/pt.c | 4 ++-- drivers/char/dsp56k.c | 2 +- drivers/char/ftape/zftape/zftape-init.c | 12 ++++++------ drivers/char/ip2main.c | 10 ++++++---- drivers/char/ipmi/ipmi_devintf.c | 2 +- drivers/char/istallion.c | 3 ++- drivers/char/lp.c | 2 +- drivers/char/mem.c | 3 ++- drivers/char/misc.c | 2 +- drivers/char/ppdev.c | 2 +- drivers/char/raw.c | 4 ++-- drivers/char/snsc.c | 2 +- drivers/char/stallion.c | 4 +++- drivers/char/tipar.c | 2 +- drivers/char/tty_io.c | 10 +++++----- drivers/char/vc_screen.c | 10 ++++++---- drivers/char/viotape.c | 4 ++-- drivers/hwmon/hwmon.c | 2 +- drivers/ide/ide-tape.c | 4 ++-- drivers/ieee1394/dv1394.c | 2 +- drivers/ieee1394/raw1394.c | 2 +- drivers/ieee1394/video1394.c | 2 +- drivers/infiniband/core/ucm.c | 2 +- drivers/input/evdev.c | 2 +- drivers/input/joydev.c | 2 +- drivers/input/mousedev.c | 4 ++-- drivers/input/tsdev.c | 2 +- drivers/isdn/capi/capi.c | 2 +- drivers/macintosh/adb.c | 2 +- drivers/media/dvb/dvb-core/dvbdev.c | 2 +- drivers/message/i2o/iop.c | 2 +- drivers/mtd/mtdchar.c | 4 ++-- drivers/net/ppp_generic.c | 2 +- drivers/net/wan/cosa.c | 2 +- drivers/s390/char/tape_class.c | 1 + drivers/s390/char/vmlogrdr.c | 1 + drivers/scsi/ch.c | 2 +- drivers/scsi/osst.c | 2 +- drivers/scsi/sg.c | 2 +- drivers/scsi/st.c | 2 +- drivers/usb/core/devio.c | 2 +- drivers/usb/core/file.c | 4 +++- drivers/usb/core/hcd.c | 3 ++- drivers/video/fbmem.c | 2 +- fs/coda/psdev.c | 4 ++-- sound/core/sound.c | 2 +- sound/oss/soundcard.c | 4 ++-- sound/sound_core.c | 2 +- 52 files changed, 86 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 4647db4ad6de..13bae799e626 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i) int err = 0; struct class_device *class_err; - class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); + class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 03100d6fc5d6..44470fea4309 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -246,7 +246,7 @@ static int msr_class_device_create(int i) int err = 0; struct class_device *class_err; - class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); + class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c index 45a243096187..41ae0ede619a 100644 --- a/drivers/block/aoe/aoechr.c +++ b/drivers/block/aoe/aoechr.c @@ -224,7 +224,7 @@ aoechr_init(void) return PTR_ERR(aoe_class); } for (i = 0; i < ARRAY_SIZE(chardevs); ++i) - class_device_create(aoe_class, + class_device_create(aoe_class, NULL, MKDEV(AOE_MAJOR, chardevs[i].minor), NULL, chardevs[i].name); diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index b3982395f22b..82f2d6d2eeef 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -674,7 +674,7 @@ static int __init pg_init(void) for (unit = 0; unit < PG_UNITS; unit++) { struct pg *dev = &devices[unit]; if (dev->present) { - class_device_create(pg_class, MKDEV(major, unit), + class_device_create(pg_class, NULL, MKDEV(major, unit), NULL, "pg%u", unit); err = devfs_mk_cdev(MKDEV(major, unit), S_IFCHR | S_IRUSR | S_IWUSR, "pg/%u", diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index d8d35233cf49..686c95573452 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -971,7 +971,7 @@ static int __init pt_init(void) devfs_mk_dir("pt"); for (unit = 0; unit < PT_UNITS; unit++) if (pt[unit].present) { - class_device_create(pt_class, MKDEV(major, unit), + class_device_create(pt_class, NULL, MKDEV(major, unit), NULL, "pt%d", unit); err = devfs_mk_cdev(MKDEV(major, unit), S_IFCHR | S_IRUSR | S_IWUSR, @@ -980,7 +980,7 @@ static int __init pt_init(void) class_device_destroy(pt_class, MKDEV(major, unit)); goto out_class; } - class_device_create(pt_class, MKDEV(major, unit + 128), + class_device_create(pt_class, NULL, MKDEV(major, unit + 128), NULL, "pt%dn", unit); err = devfs_mk_cdev(MKDEV(major, unit + 128), S_IFCHR | S_IRUSR | S_IWUSR, diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c index 26271e3ca823..8693835cb2d5 100644 --- a/drivers/char/dsp56k.c +++ b/drivers/char/dsp56k.c @@ -515,7 +515,7 @@ static int __init dsp56k_init_driver(void) err = PTR_ERR(dsp56k_class); goto out_chrdev; } - class_device_create(dsp56k_class, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k"); + class_device_create(dsp56k_class, NULL, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k"); err = devfs_mk_cdev(MKDEV(DSP56K_MAJOR, 0), S_IFCHR | S_IRUSR | S_IWUSR, "dsp56k"); diff --git a/drivers/char/ftape/zftape/zftape-init.c b/drivers/char/ftape/zftape/zftape-init.c index 5745b74044ec..821357ce7e0e 100644 --- a/drivers/char/ftape/zftape/zftape-init.c +++ b/drivers/char/ftape/zftape/zftape-init.c @@ -331,27 +331,27 @@ KERN_INFO zft_class = class_create(THIS_MODULE, "zft"); for (i = 0; i < 4; i++) { - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "qft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 4), S_IFCHR | S_IRUSR | S_IWUSR, "nqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 16), S_IFCHR | S_IRUSR | S_IWUSR, "zqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 20), S_IFCHR | S_IRUSR | S_IWUSR, "nzqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 32), S_IFCHR | S_IRUSR | S_IWUSR, "rawqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 36), S_IFCHR | S_IRUSR | S_IWUSR, "nrawqft%i", i); diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c index 9e4e26aef94e..d815d197dc3e 100644 --- a/drivers/char/ip2main.c +++ b/drivers/char/ip2main.c @@ -721,8 +721,9 @@ ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) } if ( NULL != ( pB = i2BoardPtrTable[i] ) ) { - class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR, - 4 * i), NULL, "ipl%d", i); + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i), + NULL, "ipl%d", i); err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i), S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, "ip2/ipl%d", i); @@ -732,8 +733,9 @@ ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) goto out_class; } - class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR, - 4 * i + 1), NULL, "stat%d", i); + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + NULL, "stat%d", i); err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1), S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, "ip2/stat%d", i); diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index a09ff1080687..7c0684deea06 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -798,7 +798,7 @@ static void ipmi_new_smi(int if_num) devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR, "ipmidev/%d", if_num); - class_device_create(ipmi_class, dev, NULL, "ipmi%d", if_num); + class_device_create(ipmi_class, NULL, dev, NULL, "ipmi%d", if_num); } static void ipmi_smi_gone(int if_num) diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 9c19e5435a11..e3ddbdb85a2f 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -5246,7 +5246,8 @@ int __init stli_init(void) devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "staliomem/%d", i); - class_device_create(istallion_class, MKDEV(STL_SIOMEMMAJOR, i), + class_device_create(istallion_class, NULL, + MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i); } diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 2afb9038dbc5..e57260525293 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -805,7 +805,7 @@ static int lp_register(int nr, struct parport *port) if (reset) lp_reset(nr); - class_device_create(lp_class, MKDEV(LP_MAJOR, nr), NULL, + class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), NULL, "lp%d", nr); devfs_mk_cdev(MKDEV(LP_MAJOR, nr), S_IFCHR | S_IRUGO | S_IWUGO, "printers/%d", nr); diff --git a/drivers/char/mem.c b/drivers/char/mem.c index f182752fe918..38be4b0dbd1c 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -920,7 +920,8 @@ static int __init chr_dev_init(void) mem_class = class_create(THIS_MODULE, "mem"); for (i = 0; i < ARRAY_SIZE(devlist); i++) { - class_device_create(mem_class, MKDEV(MEM_MAJOR, devlist[i].minor), + class_device_create(mem_class, NULL, + MKDEV(MEM_MAJOR, devlist[i].minor), NULL, devlist[i].name); devfs_mk_cdev(MKDEV(MEM_MAJOR, devlist[i].minor), S_IFCHR | devlist[i].mode, devlist[i].name); diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 0c8375165e29..3e4c0414a01a 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -234,7 +234,7 @@ int misc_register(struct miscdevice * misc) } dev = MKDEV(MISC_MAJOR, misc->minor); - misc->class = class_device_create(misc_class, dev, misc->dev, + misc->class = class_device_create(misc_class, NULL, dev, misc->dev, "%s", misc->name); if (IS_ERR(misc->class)) { err = PTR_ERR(misc->class); diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index 0e22880432bc..306ee0f091a4 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -752,7 +752,7 @@ static struct file_operations pp_fops = { static void pp_attach(struct parport *port) { - class_device_create(ppdev_class, MKDEV(PP_MAJOR, port->number), + class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), NULL, "parport%d", port->number); } diff --git a/drivers/char/raw.c b/drivers/char/raw.c index f13e5de02207..30e4cbe16bb0 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -128,7 +128,7 @@ raw_ioctl(struct inode *inode, struct file *filp, static void bind_device(struct raw_config_request *rq) { class_device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor)); - class_device_create(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor), + class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor), NULL, "raw%d", rq->raw_minor); } @@ -307,7 +307,7 @@ static int __init raw_init(void) unregister_chrdev_region(dev, MAX_RAW_MINORS); goto error; } - class_device_create(raw_class, MKDEV(RAW_MAJOR, 0), NULL, "rawctl"); + class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl"); devfs_mk_cdev(MKDEV(RAW_MAJOR, 0), S_IFCHR | S_IRUGO | S_IWUGO, diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c index 261a41bf6d02..1758a83327e5 100644 --- a/drivers/char/snsc.c +++ b/drivers/char/snsc.c @@ -437,7 +437,7 @@ scdrv_init(void) continue; } - class_device_create(snsc_class, dev, NULL, + class_device_create(snsc_class, NULL, dev, NULL, "%s", devname); ia64_sn_irtr_intr_enable(scd->scd_nasid, diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 951545a6ef2d..1c686414e0a1 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -3095,7 +3095,9 @@ static int __init stl_init(void) devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i), S_IFCHR|S_IRUSR|S_IWUSR, "staliomem/%d", i); - class_device_create(stallion_class, MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i); + class_device_create(stallion_class, NULL, + MKDEV(STL_SIOMEMMAJOR, i), NULL, + "staliomem%d", i); } stl_serial->owner = THIS_MODULE; diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c index ec78d2f161f7..41a94bc79f67 100644 --- a/drivers/char/tipar.c +++ b/drivers/char/tipar.c @@ -436,7 +436,7 @@ tipar_register(int nr, struct parport *port) goto out; } - class_device_create(tipar_class, MKDEV(TIPAR_MAJOR, + class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr), NULL, "par%d", nr); /* Use devfs, tree: /dev/ticables/par/[0..2] */ err = devfs_mk_cdev(MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr), diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e5953f3433f3..f5649a337743 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2728,7 +2728,7 @@ void tty_register_device(struct tty_driver *driver, unsigned index, pty_line_name(driver, index, name); else tty_line_name(driver, index, name); - class_device_create(tty_class, dev, device, name); + class_device_create(tty_class, NULL, dev, device, "%s", name); } /** @@ -2983,14 +2983,14 @@ static int __init tty_init(void) register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) panic("Couldn't register /dev/tty driver\n"); devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty"); - class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); + class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); cdev_init(&console_cdev, &console_fops); if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0) panic("Couldn't register /dev/console driver\n"); devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR, "console"); - class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL, "console"); + class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console"); #ifdef CONFIG_UNIX98_PTYS cdev_init(&ptmx_cdev, &ptmx_fops); @@ -2998,7 +2998,7 @@ static int __init tty_init(void) register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0) panic("Couldn't register /dev/ptmx driver\n"); devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx"); - class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); + class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); #endif #ifdef CONFIG_VT @@ -3007,7 +3007,7 @@ static int __init tty_init(void) register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0) panic("Couldn't register /dev/tty0 driver\n"); devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0"); - class_device_create(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0"); + class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0"); vty_init(); #endif diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index 79c2928a8817..f66c7ad6fd38 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -484,8 +484,10 @@ void vcs_make_devfs(struct tty_struct *tty) devfs_mk_cdev(MKDEV(VCS_MAJOR, tty->index + 129), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/a%u", tty->index + 1); - class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 1), NULL, "vcs%u", tty->index + 1); - class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 129), NULL, "vcsa%u", tty->index + 1); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), + NULL, "vcs%u", tty->index + 1); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), + NULL, "vcsa%u", tty->index + 1); } void vcs_remove_devfs(struct tty_struct *tty) { @@ -503,7 +505,7 @@ int __init vcs_init(void) devfs_mk_cdev(MKDEV(VCS_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/0"); devfs_mk_cdev(MKDEV(VCS_MAJOR, 128), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/a0"); - class_device_create(vc_class, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); - class_device_create(vc_class, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); return 0; } diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c index 0aff45fac2e6..a5e104f428f8 100644 --- a/drivers/char/viotape.c +++ b/drivers/char/viotape.c @@ -956,9 +956,9 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id) state[i].cur_part = 0; for (j = 0; j < MAX_PARTITIONS; ++j) state[i].part_stat_rwi[j] = VIOT_IDLE; - class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i), NULL, + class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL, "iseries!vt%d", i); - class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80), + class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), NULL, "iseries!nvt%d", i); devfs_mk_cdev(MKDEV(VIOTAPE_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "iseries/vt%d", i); diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 9b41c9bd805f..6f48579799b5 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -45,7 +45,7 @@ struct class_device *hwmon_device_register(struct device *dev) return ERR_PTR(-ENOMEM); id = id & MAX_ID_MASK; - cdev = class_device_create(hwmon_class, MKDEV(0,0), dev, + cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev, HWMON_ID_FORMAT, id); if (IS_ERR(cdev)) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 95abe981530d..47f2b832555f 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4884,9 +4884,9 @@ static int ide_tape_probe(struct device *dev) idetape_setup(drive, tape, minor); - class_device_create(idetape_sysfs_class, + class_device_create(idetape_sysfs_class, NULL, MKDEV(IDETAPE_MAJOR, minor), dev, "%s", tape->name); - class_device_create(idetape_sysfs_class, + class_device_create(idetape_sysfs_class, NULL, MKDEV(IDETAPE_MAJOR, minor + 128), dev, "n%s", tape->name); devfs_mk_cdev(MKDEV(HWIF(drive)->major, minor), diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index e34730c7a874..cbbbe14b8849 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -2361,7 +2361,7 @@ static void dv1394_add_host (struct hpsb_host *host) ohci = (struct ti_ohci *)host->hostdata; - class_device_create(hpsb_protocol_class, MKDEV( + class_device_create(hpsb_protocol_class, NULL, MKDEV( IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)), NULL, "dv1394-%d", id); devfs_mk_dir("ieee1394/dv/host%d", id); diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index 0470f77a9cd1..24411e666b21 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -2912,7 +2912,7 @@ static int __init init_raw1394(void) hpsb_register_highlevel(&raw1394_highlevel); - if (IS_ERR(class_device_create(hpsb_protocol_class, MKDEV( + if (IS_ERR(class_device_create(hpsb_protocol_class, NULL, MKDEV( IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16), NULL, RAW1394_DEVICE_NAME))) { ret = -EFAULT; diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 11be9c9c82a8..23911da50154 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -1370,7 +1370,7 @@ static void video1394_add_host (struct hpsb_host *host) hpsb_set_hostinfo_key(&video1394_highlevel, host, ohci->host->id); minor = IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id; - class_device_create(hpsb_protocol_class, MKDEV( + class_device_create(hpsb_protocol_class, NULL, MKDEV( IEEE1394_MAJOR, minor), NULL, "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id); devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, minor), diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d0f0b0a2edd3..021b8f1d36d3 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -1300,7 +1300,7 @@ static int __init ib_ucm_init(void) goto err_class; } - class_device_create(ib_ucm_class, IB_UCM_DEV, NULL, "ucm"); + class_device_create(ib_ucm_class, NULL, IB_UCM_DEV, NULL, "ucm"); idr_init(&ctx_id_table); init_MUTEX(&ctx_id_mutex); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 3738d173f9a6..83b694cb8507 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -689,7 +689,7 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), dev->dev, "event%d", minor); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index e0938d1d3ad7..c696fb2a6f99 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -516,7 +516,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), dev->dev, "js%d", minor); diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index c6194a9dd174..d7144e1a9ae3 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -651,7 +651,7 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), S_IFCHR|S_IRUGO|S_IWUSR, "input/mouse%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), dev->dev, "mouse%d", minor); @@ -740,7 +740,7 @@ static int __init mousedev_init(void) devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), S_IFCHR|S_IRUGO|S_IWUSR, "input/mice"); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 50c63a155156..fbb35c97551b 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -414,7 +414,7 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, S_IFCHR|S_IRUGO|S_IWUSR, "input/ts%d", minor); devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor + TSDEV_MINORS/2), S_IFCHR|S_IRUGO|S_IWUSR, "input/tsraw%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), dev->dev, "ts%d", minor); diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 04fb606b5ddd..11ae0fddea04 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1505,7 +1505,7 @@ static int __init capi_init(void) return PTR_ERR(capi_class); } - class_device_create(capi_class, MKDEV(capi_major, 0), NULL, "capi"); + class_device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi"); devfs_mk_cdev(MKDEV(capi_major, 0), S_IFCHR | S_IRUSR | S_IWUSR, "isdn/capi20"); diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index c0dc1e3fa58b..d2ead1776c16 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -905,5 +905,5 @@ adbdev_init(void) adb_dev_class = class_create(THIS_MODULE, "adb"); if (IS_ERR(adb_dev_class)) return; - class_device_create(adb_dev_class, MKDEV(ADB_MAJOR, 0), NULL, "adb"); + class_device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb"); } diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 4b7adca3e286..477b4fa56430 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -235,7 +235,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, S_IFCHR | S_IRUSR | S_IWUSR, "dvb/adapter%d/%s%d", adap->num, dnames[type], id); - class_device_create(dvb_class, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), + class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), NULL, "dvb%d.%s%d", adap->num, dnames[type], id); dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 176fb573ea26..361da8d1d5e7 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -1141,7 +1141,7 @@ int i2o_iop_add(struct i2o_controller *c) goto iop_reset; } - c->classdev = class_device_create(i2o_controller_class, 0, + c->classdev = class_device_create(i2o_controller_class, NULL, MKDEV(0,0), &c->device, "iop%d", c->unit); if (IS_ERR(c->classdev)) { osm_err("%s: could not add controller class\n", c->name); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 1ed602a0f24c..c534fd5d95cb 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -24,10 +24,10 @@ static void mtd_notify_add(struct mtd_info* mtd) if (!mtd) return; - class_device_create(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), + class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), NULL, "mtd%d", mtd->index); - class_device_create(mtd_class, + class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), NULL, "mtd%dro", mtd->index); } diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 0df7e92b0bf8..d3c9958b00d0 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -863,7 +863,7 @@ static int __init ppp_init(void) err = PTR_ERR(ppp_class); goto out_chrdev; } - class_device_create(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); + class_device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); err = devfs_mk_cdev(MKDEV(PPP_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "ppp"); if (err) diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 7ff814fd65d0..ace68e5bc6c9 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -400,7 +400,7 @@ static int __init cosa_init(void) goto out_chrdev; } for (i=0; iclass_device = class_device_create( tape_class, + NULL, tcd->char_device->dev, device, "%s", tcd->device_name diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index 491f00c032e8..a107fec4457a 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -787,6 +787,7 @@ vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) { return ret; } priv->class_device = class_device_create( + NULL, vmlogrdr_class, MKDEV(vmlogrdr_major, priv->minor_num), dev, diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index da6e51c7fe69..540147cb51ce 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -936,7 +936,7 @@ static int ch_probe(struct device *dev) if (init) ch_init_elem(ch); - class_device_create(ch_sysfs_class, + class_device_create(ch_sysfs_class, NULL, MKDEV(SCSI_CHANGER_MAJOR,ch->minor), dev, "s%s", ch->name); diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 3f2f2464fa63..0bb60de0bded 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5627,7 +5627,7 @@ static void osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * if (!osst_sysfs_valid) return; - osst_class_member = class_device_create(osst_sysfs_class, dev, device, "%s", name); + osst_class_member = class_device_create(osst_sysfs_class, NULL, dev, device, "%s", name); if (IS_ERR(osst_class_member)) { printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name); return; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index f0d8b4eda5ad..40886e1c9616 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1550,7 +1550,7 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) if (sg_sysfs_valid) { struct class_device * sg_class_member; - sg_class_member = class_device_create(sg_sysfs_class, + sg_class_member = class_device_create(sg_sysfs_class, NULL, MKDEV(SCSI_GENERIC_MAJOR, k), cl_dev->dev, "%s", disk->disk_name); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index d001c046551b..d45ba4832162 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4375,7 +4375,7 @@ static void do_create_class_files(struct scsi_tape *STp, int dev_num, int mode) snprintf(name, 10, "%s%s%s", rew ? "n" : "", STp->disk->disk_name, st_formats[i]); st_class_member = - class_device_create(st_sysfs_class, + class_device_create(st_sysfs_class, NULL, MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew)), &STp->device->sdev_gendev, "%s", name); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 487ff672b104..befe0c7f63d1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1509,7 +1509,7 @@ void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->class_dev = class_device_create(usb_device_class, + dev->class_dev = class_device_create(usb_device_class, NULL, MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 65ca131cc44c..78cb4be9529f 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -172,7 +172,9 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->class_dev = class_device_create(usb_class, MKDEV(USB_MAJOR, minor), &intf->dev, "%s", temp); + intf->class_dev = class_device_create(usb_class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1017a97a418b..c3eb66f5a1a4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -782,7 +782,8 @@ static int usb_register_bus(struct usb_bus *bus) return -E2BIG; } - bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum); + bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0), + bus->controller, "usb_host%d", busnum); if (IS_ERR(bus->class_dev)) { clear_bit(busnum, busmap.busmap); up(&usb_bus_list_lock); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 70be7009f8af..9073be4221a8 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1031,7 +1031,7 @@ register_framebuffer(struct fb_info *fb_info) break; fb_info->node = i; - fb_info->class_device = class_device_create(fb_class, MKDEV(FB_MAJOR, i), + fb_info->class_device = class_device_create(fb_class, NULL, MKDEV(FB_MAJOR, i), fb_info->device, "fb%d", i); if (IS_ERR(fb_info->class_device)) { /* Not fatal */ diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c index 3d1cce3653b8..6a3df88accfe 100644 --- a/fs/coda/psdev.c +++ b/fs/coda/psdev.c @@ -370,8 +370,8 @@ static int init_coda_psdev(void) } devfs_mk_dir ("coda"); for (i = 0; i < MAX_CODADEVS; i++) { - class_device_create(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR,i), - NULL, "cfs%d", i); + class_device_create(coda_psdev_class, NULL, + MKDEV(CODA_PSDEV_MAJOR,i), NULL, "cfs%d", i); err = devfs_mk_cdev(MKDEV(CODA_PSDEV_MAJOR, i), S_IFCHR|S_IRUSR|S_IWUSR, "coda/%d", i); if (err) diff --git a/sound/core/sound.c b/sound/core/sound.c index 9e76bddb2c0b..b57519a3e3d9 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -231,7 +231,7 @@ int snd_register_device(int type, snd_card_t * card, int dev, snd_minor_t * reg, devfs_mk_cdev(MKDEV(major, minor), S_IFCHR | device_mode, "snd/%s", name); if (card) device = card->dev; - class_device_create(sound_class, MKDEV(major, minor), device, "%s", name); + class_device_create(sound_class, NULL, MKDEV(major, minor), device, "%s", name); up(&sound_mutex); return 0; diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c index 95fa81e26de2..d33bb464f70e 100644 --- a/sound/oss/soundcard.c +++ b/sound/oss/soundcard.c @@ -567,7 +567,7 @@ static int __init oss_init(void) devfs_mk_cdev(MKDEV(SOUND_MAJOR, dev_list[i].minor), S_IFCHR | dev_list[i].mode, "sound/%s", dev_list[i].name); - class_device_create(sound_class, + class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, dev_list[i].minor), NULL, "%s", dev_list[i].name); @@ -579,7 +579,7 @@ static int __init oss_init(void) dev_list[i].minor + (j*0x10)), S_IFCHR | dev_list[i].mode, "sound/%s%d", dev_list[i].name, j); - class_device_create(sound_class, + class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, dev_list[i].minor + (j*0x10)), NULL, "%s%d", dev_list[i].name, j); } diff --git a/sound/sound_core.c b/sound/sound_core.c index 954f994592ab..394b53e20cb8 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -174,7 +174,7 @@ static int sound_insert_unit(struct sound_unit **list, struct file_operations *f devfs_mk_cdev(MKDEV(SOUND_MAJOR, s->unit_minor), S_IFCHR | mode, s->name); - class_device_create(sound_class, MKDEV(SOUND_MAJOR, s->unit_minor), + class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, s->unit_minor), dev, s->name+6); return r; -- cgit v1.2.3 From 4f00469c16b86a3dd6ed66b28c605c8430d58eeb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:38 -0500 Subject: [PATCH] Input: kill devfs references Input: remove references to devfs from input subsystem Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 4 ---- drivers/input/input.c | 7 ------- drivers/input/joydev.c | 4 ---- drivers/input/mousedev.c | 9 +-------- drivers/input/tsdev.c | 7 ------- 5 files changed, 1 insertion(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 83b694cb8507..14ea57f963bb 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -20,7 +20,6 @@ #include #include #include -#include #include struct evdev { @@ -687,8 +686,6 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), dev->dev, "event%d", minor); @@ -703,7 +700,6 @@ static void evdev_disconnect(struct input_handle *handle) class_device_destroy(input_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); - devfs_remove("input/event%d", evdev->minor); evdev->exist = 0; if (evdev->open) { diff --git a/drivers/input/input.c b/drivers/input/input.c index 14ae5583e198..072bbf528151 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -22,7 +22,6 @@ #include #include #include -#include MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Input core"); @@ -770,13 +769,8 @@ static int __init input_init(void) goto fail2; } - err = devfs_mk_dir("input"); - if (err) - goto fail3; - return 0; - fail3: unregister_chrdev(INPUT_MAJOR, "input"); fail2: input_proc_exit(); fail1: class_destroy(input_class); return err; @@ -785,7 +779,6 @@ static int __init input_init(void) static void __exit input_exit(void) { input_proc_exit(); - devfs_remove("input"); unregister_chrdev(INPUT_MAJOR, "input"); class_destroy(input_class); } diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index c696fb2a6f99..40d2b46cbc79 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -26,7 +26,6 @@ #include #include #include -#include MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Joystick device interfaces"); @@ -514,8 +513,6 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), dev->dev, "js%d", minor); @@ -529,7 +526,6 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev_list *list; class_device_destroy(input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); - devfs_remove("input/js%d", joydev->minor); joydev->exist = 0; if (joydev->open) { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index d7144e1a9ae3..89c3e496f1ed 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -9,7 +9,7 @@ * the Free Software Foundation. */ -#define MOUSEDEV_MINOR_BASE 32 +#define MOUSEDEV_MINOR_BASE 32 #define MOUSEDEV_MINORS 32 #define MOUSEDEV_MIX 31 @@ -24,7 +24,6 @@ #include #include #include -#include #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX #include #endif @@ -649,8 +648,6 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/mouse%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), dev->dev, "mouse%d", minor); @@ -665,7 +662,6 @@ static void mousedev_disconnect(struct input_handle *handle) class_device_destroy(input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); - devfs_remove("input/mouse%d", mousedev->minor); mousedev->exist = 0; if (mousedev->open) { @@ -738,8 +734,6 @@ static int __init mousedev_init(void) mousedev_mix.exist = 1; mousedev_mix.minor = MOUSEDEV_MIX; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), - S_IFCHR|S_IRUGO|S_IWUSR, "input/mice"); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); @@ -759,7 +753,6 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - devfs_remove("input/mice"); class_device_destroy(input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index fbb35c97551b..2d45e4df4163 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -53,7 +53,6 @@ #include #include #include -#include #ifndef CONFIG_INPUT_TSDEV_SCREEN_X #define CONFIG_INPUT_TSDEV_SCREEN_X 240 @@ -410,10 +409,6 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/ts%d", minor); - devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor + TSDEV_MINORS/2), - S_IFCHR|S_IRUGO|S_IWUSR, "input/tsraw%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), dev->dev, "ts%d", minor); @@ -428,8 +423,6 @@ static void tsdev_disconnect(struct input_handle *handle) class_device_destroy(input_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); - devfs_remove("input/ts%d", tsdev->minor); - devfs_remove("input/tsraw%d", tsdev->minor); tsdev->exist = 0; if (tsdev->open) { -- cgit v1.2.3 From d19fbe8a763634395d4bef40fc88cdb61c4a6274 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:39 -0500 Subject: [PATCH] Input: prepare to sysfs integration Input: prepare to sysfs integration Add struct class_device to input_dev; add input_allocate_dev() to dynamically allocate input devices; dynamically allocated devices are automatically registered with sysfs. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++---- include/linux/input.h | 24 +++++++++++++++- 2 files changed, 95 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 072bbf528151..0e2e890c0988 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -27,6 +27,7 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Input core"); MODULE_LICENSE("GPL"); +EXPORT_SYMBOL(input_allocate_device); EXPORT_SYMBOL(input_register_device); EXPORT_SYMBOL(input_unregister_device); EXPORT_SYMBOL(input_register_handler); @@ -605,6 +606,56 @@ static inline int input_proc_init(void) { return 0; } static inline void input_proc_exit(void) { } #endif +static void input_dev_release(struct class_device *class_dev) +{ + struct input_dev *dev = to_input_dev(class_dev); + + kfree(dev); + module_put(THIS_MODULE); +} + +static struct class input_dev_class = { + .name = "input_dev", + .release = input_dev_release, +}; + +struct input_dev *input_allocate_device(void) +{ + struct input_dev *dev; + + dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); + if (dev) { + dev->dynalloc = 1; + dev->cdev.class = &input_dev_class; + class_device_initialize(&dev->cdev); + INIT_LIST_HEAD(&dev->h_list); + INIT_LIST_HEAD(&dev->node); + } + + return dev; +} + +static void input_register_classdevice(struct input_dev *dev) +{ + static atomic_t input_no = ATOMIC_INIT(0); + const char *path; + + __module_get(THIS_MODULE); + + dev->dev = dev->cdev.dev; + + snprintf(dev->cdev.class_id, sizeof(dev->cdev.class_id), + "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1); + + path = kobject_get_path(&dev->cdev.class->subsys.kset.kobj, GFP_KERNEL); + printk(KERN_INFO "input: %s/%s as %s\n", + dev->name ? dev->name : "Unspecified device", + path ? path : "", dev->cdev.class_id); + kfree(path); + + class_device_add(&dev->cdev); +} + void input_register_device(struct input_dev *dev) { struct input_handle *handle; @@ -637,6 +688,10 @@ void input_register_device(struct input_dev *dev) if ((handle = handler->connect(handler, dev, id))) input_link_handle(handle); + + if (dev->dynalloc) + input_register_classdevice(dev); + #ifdef CONFIG_HOTPLUG input_call_hotplug("add", dev); #endif @@ -665,6 +720,9 @@ void input_unregister_device(struct input_dev *dev) list_del_init(&dev->node); + if (dev->dynalloc) + class_device_unregister(&dev->cdev); + input_wakeup_procfs_readers(); } @@ -753,26 +811,34 @@ static int __init input_init(void) { int err; + err = class_register(&input_dev_class); + if (err) { + printk(KERN_ERR "input: unable to register input_dev class\n"); + return err; + } + input_class = class_create(THIS_MODULE, "input"); if (IS_ERR(input_class)) { printk(KERN_ERR "input: unable to register input class\n"); - return PTR_ERR(input_class); + err = PTR_ERR(input_class); + goto fail1; } err = input_proc_init(); if (err) - goto fail1; + goto fail2; err = register_chrdev(INPUT_MAJOR, "input", &input_fops); if (err) { printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR); - goto fail2; + goto fail3; } return 0; - fail2: input_proc_exit(); - fail1: class_destroy(input_class); + fail3: input_proc_exit(); + fail2: class_destroy(input_class); + fail1: class_unregister(&input_dev_class); return err; } @@ -781,6 +847,7 @@ static void __exit input_exit(void) input_proc_exit(); unregister_chrdev(INPUT_MAJOR, "input"); class_destroy(input_class); + class_unregister(&input_dev_class); } subsys_initcall(input_init); diff --git a/include/linux/input.h b/include/linux/input.h index e8c296ff6257..3defa29a17d3 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -12,6 +12,7 @@ #ifdef __KERNEL__ #include #include +#include #else #include #include @@ -889,11 +890,15 @@ struct input_dev { struct semaphore sem; /* serializes open and close operations */ unsigned int users; - struct device *dev; + struct class_device cdev; + struct device *dev; /* will be removed soon */ + + int dynalloc; /* temporarily */ struct list_head h_list; struct list_head node; }; +#define to_input_dev(d) container_of(d, struct input_dev, cdev) /* * Structure for hotplug & device<->driver matching. @@ -984,6 +989,23 @@ static inline void init_input_dev(struct input_dev *dev) INIT_LIST_HEAD(&dev->node); } +struct input_dev *input_allocate_device(void); + +static inline void input_free_device(struct input_dev *dev) +{ + kfree(dev); +} + +static inline struct input_dev *input_get_device(struct input_dev *dev) +{ + return to_input_dev(class_device_get(&dev->cdev)); +} + +static inline void input_put_device(struct input_dev *dev) +{ + class_device_put(&dev->cdev); +} + void input_register_device(struct input_dev *); void input_unregister_device(struct input_dev *); -- cgit v1.2.3 From 2e5b636bb5f8dacbb91d08544e2c41ebcad5dace Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:44 -0500 Subject: [PATCH] drivers/input/mouse: convert to dynamic input_dev allocation Input: convert drivers/input/mouse to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/mouse/alps.c | 63 ++++++++++++------------ drivers/input/mouse/alps.h | 2 +- drivers/input/mouse/amimouse.c | 49 +++++++++---------- drivers/input/mouse/inport.c | 96 ++++++++++++++++++------------------ drivers/input/mouse/lifebook.c | 16 +++--- drivers/input/mouse/logibm.c | 88 ++++++++++++++++----------------- drivers/input/mouse/logips2pp.c | 20 ++++---- drivers/input/mouse/maplemouse.c | 10 ++-- drivers/input/mouse/pc110pad.c | 64 ++++++++++++------------ drivers/input/mouse/psmouse-base.c | 99 ++++++++++++++++++++------------------ drivers/input/mouse/psmouse.h | 2 +- drivers/input/mouse/rpcmouse.c | 43 ++++++++--------- drivers/input/mouse/sermouse.c | 82 +++++++++++++++---------------- drivers/input/mouse/synaptics.c | 6 +-- drivers/input/mouse/vsxxxaa.c | 84 +++++++++++++++----------------- 15 files changed, 363 insertions(+), 361 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index b20783f9748a..4acc7fd4cd0f 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -79,8 +79,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; - struct input_dev *dev = &psmouse->dev; - struct input_dev *dev2 = &priv->dev2; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; int x, y, z, ges, fin, left, right, middle; int back = 0, forward = 0; @@ -379,20 +379,24 @@ static int alps_reconnect(struct psmouse *psmouse) static void alps_disconnect(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; + psmouse_reset(psmouse); - input_unregister_device(&priv->dev2); + input_unregister_device(priv->dev2); kfree(priv); } int alps_init(struct psmouse *psmouse) { struct alps_data *priv; + struct input_dev *dev1 = psmouse->dev, *dev2; int version; - psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL); - if (!priv) + psmouse->private = priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL); + dev2 = input_allocate_device(); + if (!priv || !dev2) goto init_fail; - memset(priv, 0, sizeof(struct alps_data)); + + priv->dev2 = dev2; if (!(priv->i = alps_get_model(psmouse, &version))) goto init_fail; @@ -411,41 +415,39 @@ int alps_init(struct psmouse *psmouse) if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0)) goto init_fail; - psmouse->dev.evbit[LONG(EV_KEY)] |= BIT(EV_KEY); - psmouse->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - psmouse->dev.keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); - psmouse->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); + dev1->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); + dev1->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); + dev1->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - psmouse->dev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS); - input_set_abs_params(&psmouse->dev, ABS_X, 0, 1023, 0, 0); - input_set_abs_params(&psmouse->dev, ABS_Y, 0, 767, 0, 0); - input_set_abs_params(&psmouse->dev, ABS_PRESSURE, 0, 127, 0, 0); + dev1->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); + input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (priv->i->flags & ALPS_WHEEL) { - psmouse->dev.evbit[LONG(EV_REL)] |= BIT(EV_REL); - psmouse->dev.relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL); + dev1->evbit[LONG(EV_REL)] |= BIT(EV_REL); + dev1->relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL); } if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { - psmouse->dev.keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD); - psmouse->dev.keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK); + dev1->keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD); + dev1->keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK); } sprintf(priv->phys, "%s/input1", psmouse->ps2dev.serio->phys); - priv->dev2.phys = priv->phys; - priv->dev2.name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; - priv->dev2.id.bustype = BUS_I8042; - priv->dev2.id.vendor = 0x0002; - priv->dev2.id.product = PSMOUSE_ALPS; - priv->dev2.id.version = 0x0000; - - priv->dev2.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - priv->dev2.relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y); - priv->dev2.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + dev2->phys = priv->phys; + dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; + dev2->id.bustype = BUS_I8042; + dev2->id.vendor = 0x0002; + dev2->id.product = PSMOUSE_ALPS; + dev2->id.version = 0x0000; - input_register_device(&priv->dev2); + dev2->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + dev2->relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y); + dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - printk(KERN_INFO "input: %s on %s\n", priv->dev2.name, psmouse->ps2dev.serio->phys); + input_register_device(priv->dev2); psmouse->protocol_handler = alps_process_byte; psmouse->disconnect = alps_disconnect; @@ -455,6 +457,7 @@ int alps_init(struct psmouse *psmouse) return 0; init_fail: + input_free_device(dev2); kfree(priv); return -1; } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index aba103dd65b7..e428f8d5d12e 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -22,7 +22,7 @@ struct alps_model_info { }; struct alps_data { - struct input_dev dev2; /* Relative device */ + struct input_dev *dev2; /* Relative device */ char name[32]; /* Name */ char phys[32]; /* Phys */ struct alps_model_info *i; /* Info */ diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index e994849efb8f..d13d4c8fe3c5 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -34,10 +34,7 @@ MODULE_DESCRIPTION("Amiga mouse driver"); MODULE_LICENSE("GPL"); static int amimouse_lastx, amimouse_lasty; -static struct input_dev amimouse_dev; - -static char *amimouse_name = "Amiga mouse"; -static char *amimouse_phys = "amimouse/input0"; +static struct input_dev *amimouse_dev; static irqreturn_t amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp) { @@ -62,16 +59,16 @@ static irqreturn_t amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp) potgor = custom.potgor; - input_regs(&amimouse_dev, fp); + input_regs(amimouse_dev, fp); - input_report_rel(&amimouse_dev, REL_X, dx); - input_report_rel(&amimouse_dev, REL_Y, dy); + input_report_rel(amimouse_dev, REL_X, dx); + input_report_rel(amimouse_dev, REL_Y, dy); - input_report_key(&amimouse_dev, BTN_LEFT, ciaa.pra & 0x40); - input_report_key(&amimouse_dev, BTN_MIDDLE, potgor & 0x0100); - input_report_key(&amimouse_dev, BTN_RIGHT, potgor & 0x0400); + input_report_key(amimouse_dev, BTN_LEFT, ciaa.pra & 0x40); + input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100); + input_report_key(amimouse_dev, BTN_RIGHT, potgor & 0x0400); - input_sync(&amimouse_dev); + input_sync(amimouse_dev); return IRQ_HANDLED; } @@ -103,28 +100,30 @@ static int __init amimouse_init(void) if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE)) return -ENODEV; - amimouse_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - amimouse_dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - amimouse_dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - amimouse_dev.open = amimouse_open; - amimouse_dev.close = amimouse_close; + if (!(amimouse_dev = input_allocate_device())) + return -ENOMEM; + + amimouse_dev->name = "Amiga mouse"; + amimouse_dev->phys = "amimouse/input0"; + amimouse_dev->id.bustype = BUS_AMIGA; + amimouse_dev->id.vendor = 0x0001; + amimouse_dev->id.product = 0x0002; + amimouse_dev->id.version = 0x0100; - amimouse_dev.name = amimouse_name; - amimouse_dev.phys = amimouse_phys; - amimouse_dev.id.bustype = BUS_AMIGA; - amimouse_dev.id.vendor = 0x0001; - amimouse_dev.id.product = 0x0002; - amimouse_dev.id.version = 0x0100; + amimouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + amimouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + amimouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + amimouse_dev->open = amimouse_open; + amimouse_dev->close = amimouse_close; - input_register_device(&amimouse_dev); + input_register_device(amimouse_dev); - printk(KERN_INFO "input: %s at joy0dat\n", amimouse_name); return 0; } static void __exit amimouse_exit(void) { - input_unregister_device(&amimouse_dev); + input_unregister_device(amimouse_dev); } module_init(amimouse_init); diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c index 1f62c0134010..afc66f56df43 100644 --- a/drivers/input/mouse/inport.c +++ b/drivers/input/mouse/inport.c @@ -87,40 +87,7 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)"); __obsolete_setup("inport_irq="); -static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs); - -static int inport_open(struct input_dev *dev) -{ - if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL)) - return -EBUSY; - outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); - outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); - - return 0; -} - -static void inport_close(struct input_dev *dev) -{ - outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); - outb(INPORT_MODE_BASE, INPORT_DATA_PORT); - free_irq(inport_irq, NULL); -} - -static struct input_dev inport_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, - .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, - .relbit = { BIT(REL_X) | BIT(REL_Y) }, - .open = inport_open, - .close = inport_close, - .name = INPORT_NAME, - .phys = "isa023c/input0", - .id = { - .bustype = BUS_ISA, - .vendor = INPORT_VENDOR, - .product = 0x0001, - .version = 0x0100, - }, -}; +static struct input_dev *inport_dev; static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -129,31 +96,48 @@ static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs) outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); - input_regs(&inport_dev, regs); + input_regs(inport_dev, regs); outb(INPORT_REG_X, INPORT_CONTROL_PORT); - input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT)); + input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT)); outb(INPORT_REG_Y, INPORT_CONTROL_PORT); - input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT)); + input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT)); outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT); buttons = inb(INPORT_DATA_PORT); - input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1); - input_report_key(&inport_dev, BTN_LEFT, buttons & 2); - input_report_key(&inport_dev, BTN_RIGHT, buttons & 4); + input_report_key(inport_dev, BTN_MIDDLE, buttons & 1); + input_report_key(inport_dev, BTN_LEFT, buttons & 2); + input_report_key(inport_dev, BTN_RIGHT, buttons & 4); outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); - input_sync(&inport_dev); + input_sync(inport_dev); return IRQ_HANDLED; } +static int inport_open(struct input_dev *dev) +{ + if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL)) + return -EBUSY; + outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); + outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); + + return 0; +} + +static void inport_close(struct input_dev *dev) +{ + outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); + outb(INPORT_MODE_BASE, INPORT_DATA_PORT); + free_irq(inport_irq, NULL); +} + static int __init inport_init(void) { - unsigned char a,b,c; + unsigned char a, b, c; if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) { printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE); @@ -163,26 +147,44 @@ static int __init inport_init(void) a = inb(INPORT_SIGNATURE_PORT); b = inb(INPORT_SIGNATURE_PORT); c = inb(INPORT_SIGNATURE_PORT); - if (( a == b ) || ( a != c )) { + if (a == b || a != c) { release_region(INPORT_BASE, INPORT_EXTENT); printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE); return -ENODEV; } + if (!(inport_dev = input_allocate_device())) { + printk(KERN_ERR "inport.c: Not enough memory for input device\n"); + release_region(INPORT_BASE, INPORT_EXTENT); + return -ENOMEM; + } + + inport_dev->name = INPORT_NAME; + inport_dev->phys = "isa023c/input0"; + inport_dev->id.bustype = BUS_ISA; + inport_dev->id.vendor = INPORT_VENDOR; + inport_dev->id.product = 0x0001; + inport_dev->id.version = 0x0100; + + inport_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + inport_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + inport_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + + inport_dev->open = inport_open; + inport_dev->close = inport_close; + outb(INPORT_RESET, INPORT_CONTROL_PORT); outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_BASE, INPORT_DATA_PORT); - input_register_device(&inport_dev); - - printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq); + input_register_device(inport_dev); return 0; } static void __exit inport_exit(void) { - input_unregister_device(&inport_dev); + input_unregister_device(inport_dev); release_region(INPORT_BASE, INPORT_EXTENT); } diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index bd9df9b28325..55991424ac91 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -34,7 +34,7 @@ static struct dmi_system_id lifebook_dmi_table[] = { static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { unsigned char *packet = psmouse->packet; - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; if (psmouse->pktcnt != 3) return PSMOUSE_GOOD_DATA; @@ -113,15 +113,17 @@ int lifebook_detect(struct psmouse *psmouse, int set_properties) int lifebook_init(struct psmouse *psmouse) { + struct input_dev *input_dev = psmouse->dev; + if (lifebook_absolute_mode(psmouse)) return -1; - psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL); - psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - input_set_abs_params(&psmouse->dev, ABS_X, 0, 1024, 0, 0); - input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1024, 0, 0); + input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_set_abs_params(input_dev, ABS_X, 0, 1024, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1024, 0, 0); psmouse->protocol_handler = lifebook_process_byte; psmouse->set_resolution = lifebook_set_resolution; diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c index 8b5243167227..9c7ce38806d7 100644 --- a/drivers/input/mouse/logibm.c +++ b/drivers/input/mouse/logibm.c @@ -77,39 +77,7 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)"); __obsolete_setup("logibm_irq="); -static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs); - -static int logibm_open(struct input_dev *dev) -{ - if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { - printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); - return -EBUSY; - } - outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); - return 0; -} - -static void logibm_close(struct input_dev *dev) -{ - outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); - free_irq(logibm_irq, NULL); -} - -static struct input_dev logibm_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, - .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, - .relbit = { BIT(REL_X) | BIT(REL_Y) }, - .open = logibm_open, - .close = logibm_close, - .name = "Logitech bus mouse", - .phys = "isa023c/input0", - .id = { - .bustype = BUS_ISA, - .vendor = 0x0003, - .product = 0x0001, - .version = 0x0100, - }, -}; +static struct input_dev *logibm_dev; static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -127,18 +95,34 @@ static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) dy |= (buttons & 0xf) << 4; buttons = ~buttons >> 5; - input_regs(&logibm_dev, regs); - input_report_rel(&logibm_dev, REL_X, dx); - input_report_rel(&logibm_dev, REL_Y, dy); - input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1); - input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2); - input_report_key(&logibm_dev, BTN_LEFT, buttons & 4); - input_sync(&logibm_dev); + input_regs(logibm_dev, regs); + input_report_rel(logibm_dev, REL_X, dx); + input_report_rel(logibm_dev, REL_Y, dy); + input_report_key(logibm_dev, BTN_RIGHT, buttons & 1); + input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2); + input_report_key(logibm_dev, BTN_LEFT, buttons & 4); + input_sync(logibm_dev); outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); return IRQ_HANDLED; } +static int logibm_open(struct input_dev *dev) +{ + if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { + printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); + return -EBUSY; + } + outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); + return 0; +} + +static void logibm_close(struct input_dev *dev) +{ + outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); + free_irq(logibm_irq, NULL); +} + static int __init logibm_init(void) { if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { @@ -159,16 +143,34 @@ static int __init logibm_init(void) outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); - input_register_device(&logibm_dev); + if (!(logibm_dev = input_allocate_device())) { + printk(KERN_ERR "logibm.c: Not enough memory for input device\n"); + release_region(LOGIBM_BASE, LOGIBM_EXTENT); + return -ENOMEM; + } + + logibm_dev->name = "Logitech bus mouse"; + logibm_dev->phys = "isa023c/input0"; + logibm_dev->id.bustype = BUS_ISA; + logibm_dev->id.vendor = 0x0003; + logibm_dev->id.product = 0x0001; + logibm_dev->id.version = 0x0100; + + logibm_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + logibm_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + logibm_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + + logibm_dev->open = logibm_open; + logibm_dev->close = logibm_close; - printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq); + input_register_device(logibm_dev); return 0; } static void __exit logibm_exit(void) { - input_unregister_device(&logibm_dev); + input_unregister_device(logibm_dev); release_region(LOGIBM_BASE, LOGIBM_EXTENT); } diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index 7df96525222e..0f69ff46c1ae 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -40,7 +40,7 @@ struct ps2pp_info { static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; if (psmouse->pktcnt < 3) @@ -257,25 +257,27 @@ static struct ps2pp_info *get_model_info(unsigned char model) static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_info *model_info, int using_ps2pp) { + struct input_dev *input_dev = psmouse->dev; + if (model_info->features & PS2PP_SIDE_BTN) - set_bit(BTN_SIDE, psmouse->dev.keybit); + set_bit(BTN_SIDE, input_dev->keybit); if (model_info->features & PS2PP_EXTRA_BTN) - set_bit(BTN_EXTRA, psmouse->dev.keybit); + set_bit(BTN_EXTRA, input_dev->keybit); if (model_info->features & PS2PP_TASK_BTN) - set_bit(BTN_TASK, psmouse->dev.keybit); + set_bit(BTN_TASK, input_dev->keybit); if (model_info->features & PS2PP_NAV_BTN) { - set_bit(BTN_FORWARD, psmouse->dev.keybit); - set_bit(BTN_BACK, psmouse->dev.keybit); + set_bit(BTN_FORWARD, input_dev->keybit); + set_bit(BTN_BACK, input_dev->keybit); } if (model_info->features & PS2PP_WHEEL) - set_bit(REL_WHEEL, psmouse->dev.relbit); + set_bit(REL_WHEEL, input_dev->relbit); if (model_info->features & PS2PP_HWHEEL) - set_bit(REL_HWHEEL, psmouse->dev.relbit); + set_bit(REL_HWHEEL, input_dev->relbit); switch (model_info->kind) { case PS2PP_KIND_WHEEL: @@ -387,7 +389,7 @@ int ps2pp_init(struct psmouse *psmouse, int set_properties) } if (buttons < 3) - clear_bit(BTN_MIDDLE, psmouse->dev.keybit); + clear_bit(BTN_MIDDLE, psmouse->dev->keybit); if (model_info) ps2pp_set_model_properties(psmouse, model_info, use_ps2pp); diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c index e90c60cbbf05..b5b34fe4fee8 100644 --- a/drivers/input/mouse/maplemouse.c +++ b/drivers/input/mouse/maplemouse.c @@ -41,13 +41,12 @@ static int dc_mouse_connect(struct maple_device *dev) unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]); struct input_dev *input_dev; - if (!(input_dev = kmalloc(sizeof(struct input_dev), GFP_KERNEL))) - return -1; + dev->private_data = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; dev->private_data = input_dev; - memset(input_dev, 0, sizeof(struct dc_mouse)); - init_input_dev(input_dev); input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL); @@ -59,8 +58,6 @@ static int dc_mouse_connect(struct maple_device *dev) maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE); - printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, input_dev->name); - return 0; } @@ -70,7 +67,6 @@ static void dc_mouse_disconnect(struct maple_device *dev) struct input_dev *input_dev = dev->private_data; input_unregister_device(input_dev); - kfree(input_dev); } diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index 93393d5c0078..d284ea712151 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -53,13 +53,10 @@ MODULE_LICENSE("GPL"); static int pc110pad_irq = 10; static int pc110pad_io = 0x15e0; -static struct input_dev pc110pad_dev; +static struct input_dev *pc110pad_dev; static int pc110pad_data[3]; static int pc110pad_count; -static char *pc110pad_name = "IBM PC110 TouchPad"; -static char *pc110pad_phys = "isa15e0/input0"; - static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs) { int value = inb_p(pc110pad_io); @@ -74,14 +71,14 @@ static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs) if (pc110pad_count < 3) return IRQ_HANDLED; - input_regs(&pc110pad_dev, regs); - input_report_key(&pc110pad_dev, BTN_TOUCH, + input_regs(pc110pad_dev, regs); + input_report_key(pc110pad_dev, BTN_TOUCH, pc110pad_data[0] & 0x01); - input_report_abs(&pc110pad_dev, ABS_X, + input_report_abs(pc110pad_dev, ABS_X, pc110pad_data[1] | ((pc110pad_data[0] << 3) & 0x80) | ((pc110pad_data[0] << 1) & 0x100)); - input_report_abs(&pc110pad_dev, ABS_Y, + input_report_abs(pc110pad_dev, ABS_Y, pc110pad_data[2] | ((pc110pad_data[0] << 4) & 0x80)); - input_sync(&pc110pad_dev); + input_sync(pc110pad_dev); pc110pad_count = 0; return IRQ_HANDLED; @@ -94,9 +91,9 @@ static void pc110pad_close(struct input_dev *dev) static int pc110pad_open(struct input_dev *dev) { - pc110pad_interrupt(0,NULL,NULL); - pc110pad_interrupt(0,NULL,NULL); - pc110pad_interrupt(0,NULL,NULL); + pc110pad_interrupt(0, NULL, NULL); + pc110pad_interrupt(0, NULL, NULL); + pc110pad_interrupt(0, NULL, NULL); outb(PC110PAD_ON, pc110pad_io + 2); pc110pad_count = 0; @@ -127,45 +124,46 @@ static int __init pc110pad_init(void) outb(PC110PAD_OFF, pc110pad_io + 2); - if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) - { + if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) { release_region(pc110pad_io, 4); printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq); return -EBUSY; } - pc110pad_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - pc110pad_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - pc110pad_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + if (!(pc110pad_dev = input_allocate_device())) { + free_irq(pc110pad_irq, NULL); + release_region(pc110pad_io, 4); + printk(KERN_ERR "pc110pad: Not enough memory.\n"); + return -ENOMEM; + } - pc110pad_dev.absmax[ABS_X] = 0x1ff; - pc110pad_dev.absmax[ABS_Y] = 0x0ff; + pc110pad_dev->name = "IBM PC110 TouchPad"; + pc110pad_dev->phys = "isa15e0/input0"; + pc110pad_dev->id.bustype = BUS_ISA; + pc110pad_dev->id.vendor = 0x0003; + pc110pad_dev->id.product = 0x0001; + pc110pad_dev->id.version = 0x0100; - pc110pad_dev.open = pc110pad_open; - pc110pad_dev.close = pc110pad_close; + pc110pad_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + pc110pad_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + pc110pad_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - pc110pad_dev.name = pc110pad_name; - pc110pad_dev.phys = pc110pad_phys; - pc110pad_dev.id.bustype = BUS_ISA; - pc110pad_dev.id.vendor = 0x0003; - pc110pad_dev.id.product = 0x0001; - pc110pad_dev.id.version = 0x0100; + pc110pad_dev->absmax[ABS_X] = 0x1ff; + pc110pad_dev->absmax[ABS_Y] = 0x0ff; - input_register_device(&pc110pad_dev); + pc110pad_dev->open = pc110pad_open; + pc110pad_dev->close = pc110pad_close; - printk(KERN_INFO "input: %s at %#x irq %d\n", - pc110pad_name, pc110pad_io, pc110pad_irq); + input_register_device(pc110pad_dev); return 0; } static void __exit pc110pad_exit(void) { - input_unregister_device(&pc110pad_dev); - outb(PC110PAD_OFF, pc110pad_io + 2); - free_irq(pc110pad_irq, NULL); + input_unregister_device(pc110pad_dev); release_region(pc110pad_io, 4); } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index af24313ff5bb..6ee9999a2eaa 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -114,7 +114,7 @@ struct psmouse_protocol { static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; if (psmouse->pktcnt < psmouse->pktsize) @@ -333,12 +333,11 @@ static int genius_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_EXTRA, psmouse->dev.keybit); - set_bit(BTN_SIDE, psmouse->dev.keybit); - set_bit(REL_WHEEL, psmouse->dev.relbit); + set_bit(BTN_EXTRA, psmouse->dev->keybit); + set_bit(BTN_SIDE, psmouse->dev->keybit); + set_bit(REL_WHEEL, psmouse->dev->relbit); psmouse->vendor = "Genius"; - psmouse->name = "Wheel Mouse"; psmouse->pktsize = 4; } @@ -365,8 +364,8 @@ static int intellimouse_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_MIDDLE, psmouse->dev.keybit); - set_bit(REL_WHEEL, psmouse->dev.relbit); + set_bit(BTN_MIDDLE, psmouse->dev->keybit); + set_bit(REL_WHEEL, psmouse->dev->relbit); if (!psmouse->vendor) psmouse->vendor = "Generic"; if (!psmouse->name) psmouse->name = "Wheel Mouse"; @@ -398,10 +397,10 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_MIDDLE, psmouse->dev.keybit); - set_bit(REL_WHEEL, psmouse->dev.relbit); - set_bit(BTN_SIDE, psmouse->dev.keybit); - set_bit(BTN_EXTRA, psmouse->dev.keybit); + set_bit(BTN_MIDDLE, psmouse->dev->keybit); + set_bit(REL_WHEEL, psmouse->dev->relbit); + set_bit(BTN_SIDE, psmouse->dev->keybit); + set_bit(BTN_EXTRA, psmouse->dev->keybit); if (!psmouse->vendor) psmouse->vendor = "Generic"; if (!psmouse->name) psmouse->name = "Explorer Mouse"; @@ -433,7 +432,7 @@ static int thinking_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_EXTRA, psmouse->dev.keybit); + set_bit(BTN_EXTRA, psmouse->dev->keybit); psmouse->vendor = "Kensington"; psmouse->name = "ThinkingMouse"; @@ -839,9 +838,9 @@ static void psmouse_disconnect(struct serio *serio) psmouse_set_state(psmouse, PSMOUSE_IGNORE); - input_unregister_device(&psmouse->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(psmouse->dev); kfree(psmouse); if (parent) @@ -852,16 +851,14 @@ static void psmouse_disconnect(struct serio *serio) static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_protocol *proto) { - memset(&psmouse->dev, 0, sizeof(struct input_dev)); + struct input_dev *input_dev = psmouse->dev; - init_input_dev(&psmouse->dev); + input_dev->private = psmouse; + input_dev->cdev.dev = &psmouse->ps2dev.serio->dev; - psmouse->dev.private = psmouse; - psmouse->dev.dev = &psmouse->ps2dev.serio->dev; - - psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); psmouse->set_rate = psmouse_set_rate; psmouse->set_resolution = psmouse_set_resolution; @@ -883,12 +880,12 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_proto sprintf(psmouse->devname, "%s %s %s", psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name); - psmouse->dev.name = psmouse->devname; - psmouse->dev.phys = psmouse->phys; - psmouse->dev.id.bustype = BUS_I8042; - psmouse->dev.id.vendor = 0x0002; - psmouse->dev.id.product = psmouse->type; - psmouse->dev.id.version = psmouse->model; + input_dev->name = psmouse->devname; + input_dev->phys = psmouse->phys; + input_dev->id.bustype = BUS_I8042; + input_dev->id.vendor = 0x0002; + input_dev->id.product = psmouse->type; + input_dev->id.version = psmouse->model; return 0; } @@ -900,7 +897,8 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_proto static int psmouse_connect(struct serio *serio, struct serio_driver *drv) { struct psmouse *psmouse, *parent = NULL; - int retval; + struct input_dev *input_dev; + int retval = -ENOMEM; down(&psmouse_sem); @@ -913,12 +911,13 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) psmouse_deactivate(parent); } - if (!(psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL))) { - retval = -ENOMEM; + psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!psmouse || !input_dev) goto out; - } ps2_init(&psmouse->ps2dev, serio); + psmouse->dev = input_dev; sprintf(psmouse->phys, "%s/input0", serio->phys); psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); @@ -926,16 +925,11 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) serio_set_drvdata(serio, psmouse); retval = serio_open(serio, drv); - if (retval) { - serio_set_drvdata(serio, NULL); - kfree(psmouse); + if (retval) goto out; - } if (psmouse_probe(psmouse) < 0) { serio_close(serio); - serio_set_drvdata(serio, NULL); - kfree(psmouse); retval = -ENODEV; goto out; } @@ -947,13 +941,11 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) psmouse_switch_protocol(psmouse, NULL); - input_register_device(&psmouse->dev); - printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - psmouse_initialize(psmouse); + input_register_device(psmouse->dev); + if (parent && parent->pt_activate) parent->pt_activate(parent); @@ -964,6 +956,12 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) retval = 0; out: + if (retval) { + serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(psmouse); + } + /* If this is a pass-through port the parent needs to be re-activated */ if (parent) psmouse_activate(parent); @@ -1161,6 +1159,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co { struct serio *serio = psmouse->ps2dev.serio; struct psmouse *parent = NULL; + struct input_dev *new_dev; struct psmouse_protocol *proto; int retry = 0; @@ -1170,9 +1169,13 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co if (psmouse->type == proto->type) return count; + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + while (serio->child) { if (++retry > 3) { printk(KERN_WARNING "psmouse: failed to destroy child port, protocol change aborted.\n"); + input_free_device(new_dev); return -EIO; } @@ -1182,11 +1185,15 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co serio_pin_driver_uninterruptible(serio); down(&psmouse_sem); - if (serio->drv != &psmouse_drv) + if (serio->drv != &psmouse_drv) { + input_free_device(new_dev); return -ENODEV; + } - if (psmouse->type == proto->type) + if (psmouse->type == proto->type) { + input_free_device(new_dev); return count; /* switched by other thread */ + } } if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { @@ -1199,8 +1206,9 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co psmouse->disconnect(psmouse); psmouse_set_state(psmouse, PSMOUSE_IGNORE); - input_unregister_device(&psmouse->dev); + input_unregister_device(psmouse->dev); + psmouse->dev = new_dev; psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); if (psmouse_switch_protocol(psmouse, proto) < 0) { @@ -1212,8 +1220,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co psmouse_initialize(psmouse); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - input_register_device(&psmouse->dev); - printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys); + input_register_device(psmouse->dev); if (parent && parent->pt_activate) parent->pt_activate(parent); diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 45d2bd774f00..7c4192bd1279 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -36,7 +36,7 @@ typedef enum { struct psmouse { void *private; - struct input_dev dev; + struct input_dev *dev; struct ps2dev ps2dev; char *vendor; char *name; diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 8fe1212b8fd7..09b6ffdb7582 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c @@ -34,20 +34,7 @@ MODULE_DESCRIPTION("Acorn RiscPC mouse driver"); MODULE_LICENSE("GPL"); static short rpcmouse_lastx, rpcmouse_lasty; - -static struct input_dev rpcmouse_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, - .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, - .relbit = { BIT(REL_X) | BIT(REL_Y) }, - .name = "Acorn RiscPC Mouse", - .phys = "rpcmouse/input0", - .id = { - .bustype = BUS_HOST, - .vendor = 0x0005, - .product = 0x0001, - .version = 0x0100, - }, -}; +static struct input_dev *rpcmouse_dev; static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs) { @@ -78,29 +65,41 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } + static int __init rpcmouse_init(void) { - init_input_dev(&rpcmouse_dev); + if (!(rpcmouse_dev = input_allocate_device())) + return -ENOMEM; + + rpcmouse_dev->name = "Acorn RiscPC Mouse"; + rpcmouse_dev->phys = "rpcmouse/input0"; + rpcmouse_dev->id.bustype = BUS_HOST; + rpcmouse_dev->id.vendor = 0x0005; + rpcmouse_dev->id.product = 0x0001; + rpcmouse_dev->id.version = 0x0100; + + rpcmouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + rpcmouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + rpcmouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); rpcmouse_lastx = (short) iomd_readl(IOMD_MOUSEX); rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY); - if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", &rpcmouse_dev)) { + if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", rpcmouse_dev)) { printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n"); - return -1; + input_free_device(rpcmouse_dev); + return -EBUSY; } - input_register_device(&rpcmouse_dev); - - printk(KERN_INFO "input: Acorn RiscPC mouse\n"); + input_register_device(rpcmouse_dev); return 0; } static void __exit rpcmouse_exit(void) { - input_unregister_device(&rpcmouse_dev); - free_irq(IRQ_VSYNCPULSE, &rpcmouse_dev); + free_irq(IRQ_VSYNCPULSE, rpcmouse_dev); + input_unregister_device(rpcmouse_dev); } module_init(rpcmouse_init); diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c index d12b93ae3900..4bf584364d28 100644 --- a/drivers/input/mouse/sermouse.c +++ b/drivers/input/mouse/sermouse.c @@ -48,7 +48,7 @@ static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse" "Logitech MZ++ Mouse"}; struct sermouse { - struct input_dev dev; + struct input_dev *dev; signed char buf[8]; unsigned char count; unsigned char type; @@ -64,7 +64,7 @@ struct sermouse { static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs) { - struct input_dev *dev = &sermouse->dev; + struct input_dev *dev = sermouse->dev; signed char *buf = sermouse->buf; input_regs(dev, regs); @@ -107,7 +107,7 @@ static void sermouse_process_msc(struct sermouse *sermouse, signed char data, st static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs) { - struct input_dev *dev = &sermouse->dev; + struct input_dev *dev = sermouse->dev; signed char *buf = sermouse->buf; if (data & 0x40) sermouse->count = 0; @@ -230,9 +230,9 @@ static void sermouse_disconnect(struct serio *serio) { struct sermouse *sermouse = serio_get_drvdata(serio); - input_unregister_device(&sermouse->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(sermouse->dev); kfree(sermouse); } @@ -244,56 +244,52 @@ static void sermouse_disconnect(struct serio *serio) static int sermouse_connect(struct serio *serio, struct serio_driver *drv) { struct sermouse *sermouse; - unsigned char c; - int err; + struct input_dev *input_dev; + unsigned char c = serio->id.extra; + int err = -ENOMEM; - if (!serio->id.proto || serio->id.proto > SERIO_MZPP) - return -ENODEV; - - if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL))) - return -ENOMEM; - - memset(sermouse, 0, sizeof(struct sermouse)); - - init_input_dev(&sermouse->dev); - sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); - sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - sermouse->dev.private = sermouse; - - sermouse->type = serio->id.proto; - c = serio->id.extra; - - if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit); - if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit); - if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit); - if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit); - if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit); + sermouse = kzalloc(sizeof(struct sermouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!sermouse || !input_dev) + goto fail; + sermouse->dev = input_dev; sprintf(sermouse->phys, "%s/input0", serio->phys); + sermouse->type = serio->id.proto; - sermouse->dev.name = sermouse_protocols[sermouse->type]; - sermouse->dev.phys = sermouse->phys; - sermouse->dev.id.bustype = BUS_RS232; - sermouse->dev.id.vendor = sermouse->type; - sermouse->dev.id.product = c; - sermouse->dev.id.version = 0x0100; - sermouse->dev.dev = &serio->dev; + input_dev->name = sermouse_protocols[sermouse->type]; + input_dev->phys = sermouse->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = sermouse->type; + input_dev->id.product = c; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->private = sermouse; + + if (c & 0x01) set_bit(BTN_MIDDLE, input_dev->keybit); + if (c & 0x02) set_bit(BTN_SIDE, input_dev->keybit); + if (c & 0x04) set_bit(BTN_EXTRA, input_dev->keybit); + if (c & 0x10) set_bit(REL_WHEEL, input_dev->relbit); + if (c & 0x20) set_bit(REL_HWHEEL, input_dev->relbit); serio_set_drvdata(serio, sermouse); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(sermouse); - return err; - } - - input_register_device(&sermouse->dev); + if (err) + goto fail; - printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys); + input_register_device(sermouse->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(sermouse); + return err; } static struct serio_device_id sermouse_serio_ids[] = { diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 029309422409..97cdfd6acaca 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -342,7 +342,7 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data */ static void synaptics_process_packet(struct psmouse *psmouse) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; struct synaptics_hw_state hw; int num_fingers; @@ -473,7 +473,7 @@ static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse) static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; input_regs(dev, regs); @@ -645,7 +645,7 @@ int synaptics_init(struct psmouse *psmouse) SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), priv->model_id, priv->capabilities, priv->ext_cap); - set_input_params(&psmouse->dev, priv); + set_input_params(psmouse->dev, priv); psmouse->protocol_handler = synaptics_process_byte; psmouse->set_rate = synaptics_set_rate; diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index f024be9b44d2..36e9442a16b2 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -112,7 +112,7 @@ MODULE_LICENSE ("GPL"); struct vsxxxaa { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; #define BUFLEN 15 /* At least 5 is needed for a full tablet packet */ unsigned char buf[BUFLEN]; @@ -211,7 +211,7 @@ vsxxxaa_smells_like_packet (struct vsxxxaa *mouse, unsigned char type, size_t le static void vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse, struct pt_regs *regs) { - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; int left, middle, right; int dx, dy; @@ -269,7 +269,7 @@ vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse, struct pt_regs *regs) static void vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse, struct pt_regs *regs) { - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; int left, middle, right, touch; int x, y; @@ -323,7 +323,7 @@ vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse, struct pt_regs *regs) static void vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse, struct pt_regs *regs) { - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; int left, middle, right; unsigned char error; @@ -483,9 +483,9 @@ vsxxxaa_disconnect (struct serio *serio) { struct vsxxxaa *mouse = serio_get_drvdata (serio); - input_unregister_device (&mouse->dev); serio_close (serio); serio_set_drvdata (serio, NULL); + input_unregister_device (mouse->dev); kfree (mouse); } @@ -493,61 +493,57 @@ static int vsxxxaa_connect (struct serio *serio, struct serio_driver *drv) { struct vsxxxaa *mouse; - int err; + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(mouse = kmalloc (sizeof (struct vsxxxaa), GFP_KERNEL))) - return -ENOMEM; - - memset (mouse, 0, sizeof (struct vsxxxaa)); - - init_input_dev (&mouse->dev); - set_bit (EV_KEY, mouse->dev.evbit); /* We have buttons */ - set_bit (EV_REL, mouse->dev.evbit); - set_bit (EV_ABS, mouse->dev.evbit); - set_bit (BTN_LEFT, mouse->dev.keybit); /* We have 3 buttons */ - set_bit (BTN_MIDDLE, mouse->dev.keybit); - set_bit (BTN_RIGHT, mouse->dev.keybit); - set_bit (BTN_TOUCH, mouse->dev.keybit); /* ...and Tablet */ - set_bit (REL_X, mouse->dev.relbit); - set_bit (REL_Y, mouse->dev.relbit); - set_bit (ABS_X, mouse->dev.absbit); - set_bit (ABS_Y, mouse->dev.absbit); - - mouse->dev.absmin[ABS_X] = 0; - mouse->dev.absmax[ABS_X] = 1023; - mouse->dev.absmin[ABS_Y] = 0; - mouse->dev.absmax[ABS_Y] = 1023; - - mouse->dev.private = mouse; + mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL); + input_dev = input_allocate_device (); + if (!mouse || !input_dev) + goto fail; + mouse->dev = input_dev; + mouse->serio = serio; sprintf (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer"); sprintf (mouse->phys, "%s/input0", serio->phys); - mouse->dev.name = mouse->name; - mouse->dev.phys = mouse->phys; - mouse->dev.id.bustype = BUS_RS232; - mouse->dev.dev = &serio->dev; - mouse->serio = serio; + + input_dev->name = mouse->name; + input_dev->phys = mouse->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->cdev.dev = &serio->dev; + input_dev->private = mouse; + + set_bit (EV_KEY, input_dev->evbit); /* We have buttons */ + set_bit (EV_REL, input_dev->evbit); + set_bit (EV_ABS, input_dev->evbit); + set_bit (BTN_LEFT, input_dev->keybit); /* We have 3 buttons */ + set_bit (BTN_MIDDLE, input_dev->keybit); + set_bit (BTN_RIGHT, input_dev->keybit); + set_bit (BTN_TOUCH, input_dev->keybit); /* ...and Tablet */ + set_bit (REL_X, input_dev->relbit); + set_bit (REL_Y, input_dev->relbit); + input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0); serio_set_drvdata (serio, mouse); err = serio_open (serio, drv); - if (err) { - serio_set_drvdata (serio, NULL); - kfree (mouse); - return err; - } + if (err) + goto fail; /* * Request selftest. Standard packet format and differential * mode will be requested after the device ID'ed successfully. */ - mouse->serio->write (mouse->serio, 'T'); /* Test */ - - input_register_device (&mouse->dev); + serio->write (serio, 'T'); /* Test */ - printk (KERN_INFO "input: %s on %s\n", mouse->name, mouse->phys); + input_register_device (input_dev); return 0; + + fail: serio_set_drvdata (serio, NULL); + input_free_device (input_dev); + kfree (mouse); + return err; } static struct serio_device_id vsxxaa_serio_ids[] = { -- cgit v1.2.3 From 3c42f0c3dde8feb59fc87df45cadb847d5511c0a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:45 -0500 Subject: [PATCH] drivers/input/keyboard: convert to dynamic input_dev allocation Input: convert drivers/input/keyboard to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/amikbd.c | 59 ++++++----- drivers/input/keyboard/atkbd.c | 188 +++++++++++++++++++----------------- drivers/input/keyboard/corgikbd.c | 74 +++++++------- drivers/input/keyboard/lkkbd.c | 128 ++++++++++++------------ drivers/input/keyboard/maple_keyb.c | 72 ++++++-------- drivers/input/keyboard/newtonkbd.c | 83 ++++++++-------- drivers/input/keyboard/spitzkbd.c | 79 ++++++++------- drivers/input/keyboard/sunkbd.c | 117 +++++++++++----------- drivers/input/keyboard/xtkbd.c | 80 ++++++++------- 9 files changed, 449 insertions(+), 431 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c index 4e8e8ea214ab..3d63bc1ad322 100644 --- a/drivers/input/keyboard/amikbd.c +++ b/drivers/input/keyboard/amikbd.c @@ -155,10 +155,7 @@ static const char *amikbd_messages[8] = { [7] = KERN_WARNING "amikbd: keyboard interrupt\n" }; -static struct input_dev amikbd_dev; - -static char *amikbd_name = "Amiga keyboard"; -static char *amikbd_phys = "amikbd/input0"; +static struct input_dev *amikbd_dev; static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp) { @@ -176,16 +173,16 @@ static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp) scancode = amikbd_keycode[scancode]; - input_regs(&amikbd_dev, fp); + input_regs(amikbd_dev, fp); if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */ - input_report_key(&amikbd_dev, scancode, 1); - input_report_key(&amikbd_dev, scancode, 0); - input_sync(&amikbd_dev); + input_report_key(amikbd_dev, scancode, 1); + input_report_key(amikbd_dev, scancode, 0); } else { - input_report_key(&amikbd_dev, scancode, down); - input_sync(&amikbd_dev); + input_report_key(amikbd_dev, scancode, down); } + + input_sync(amikbd_dev); } else /* scancodes >= 0x78 are error codes */ printk(amikbd_messages[scancode - 0x78]); @@ -202,39 +199,41 @@ static int __init amikbd_init(void) if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb")) return -EBUSY; - init_input_dev(&amikbd_dev); - - amikbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - amikbd_dev.keycode = amikbd_keycode; - amikbd_dev.keycodesize = sizeof(unsigned char); - amikbd_dev.keycodemax = ARRAY_SIZE(amikbd_keycode); + amikbd_dev = input_dev_allocate(); + if (!amikbd_dev) { + printk(KERN_ERR "amikbd: not enough memory for input device\n"); + release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100); + return -ENOMEM; + } + + amikbd_dev->name = "Amiga Keyboard"; + amikbd_dev->phys = "amikbd/input0"; + amikbd_dev->id.bustype = BUS_AMIGA; + amikbd_dev->id.vendor = 0x0001; + amikbd_dev->id.product = 0x0001; + amikbd_dev->id.version = 0x0100; + + amikbd_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + amikbd_dev->keycode = amikbd_keycode; + amikbd_dev->keycodesize = sizeof(unsigned char); + amikbd_dev->keycodemax = ARRAY_SIZE(amikbd_keycode); for (i = 0; i < 0x78; i++) if (amikbd_keycode[i]) - set_bit(amikbd_keycode[i], amikbd_dev.keybit); + set_bit(amikbd_keycode[i], amikbd_dev->keybit); ciaa.cra &= ~0x41; /* serial data in, turn off TA */ request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", amikbd_interrupt); - amikbd_dev.name = amikbd_name; - amikbd_dev.phys = amikbd_phys; - amikbd_dev.id.bustype = BUS_AMIGA; - amikbd_dev.id.vendor = 0x0001; - amikbd_dev.id.product = 0x0001; - amikbd_dev.id.version = 0x0100; - - input_register_device(&amikbd_dev); - - printk(KERN_INFO "input: %s\n", amikbd_name); - + input_register_device(amikbd_dev); return 0; } static void __exit amikbd_exit(void) { - input_unregister_device(&amikbd_dev); free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt); - release_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100); + input_unregister_device(amikbd_dev); + release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100); } module_init(amikbd_init); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 1ad8c2ee7dbf..820c7fd9a604 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -185,12 +185,12 @@ static struct { struct atkbd { - struct ps2dev ps2dev; + struct ps2dev ps2dev; + struct input_dev *dev; /* Written only during init */ char name[64]; char phys[32]; - struct input_dev dev; unsigned short id; unsigned char keycode[512]; @@ -290,7 +290,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, if (!atkbd->enabled) goto out; - input_event(&atkbd->dev, EV_MSC, MSC_RAW, code); + input_event(atkbd->dev, EV_MSC, MSC_RAW, code); if (atkbd->translated) { @@ -326,10 +326,10 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, atkbd->release = 1; goto out; case ATKBD_RET_HANGUEL: - atkbd_report_key(&atkbd->dev, regs, KEY_HANGUEL, 3); + atkbd_report_key(atkbd->dev, regs, KEY_HANGUEL, 3); goto out; case ATKBD_RET_HANJA: - atkbd_report_key(&atkbd->dev, regs, KEY_HANJA, 3); + atkbd_report_key(atkbd->dev, regs, KEY_HANJA, 3); goto out; case ATKBD_RET_ERR: printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys); @@ -345,7 +345,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, } if (atkbd->keycode[code] != ATKBD_KEY_NULL) - input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code); + input_event(atkbd->dev, EV_MSC, MSC_SCAN, code); switch (atkbd->keycode[code]) { case ATKBD_KEY_NULL: @@ -365,7 +365,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, "to make it known.\n", code & 0x80 ? "e0" : "", code & 0x7f); } - input_sync(&atkbd->dev); + input_sync(atkbd->dev); break; case ATKBD_SCR_1: scroll = 1 - atkbd->release * 2; @@ -390,7 +390,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, break; default: value = atkbd->release ? 0 : - (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key))); + (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev->key))); switch (value) { /* Workaround Toshiba laptop multiple keypress */ case 0: @@ -398,7 +398,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, break; case 1: atkbd->last = code; - atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev.rep[REP_DELAY]) / 2; + atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev->rep[REP_DELAY]) / 2; break; case 2: if (!time_after(jiffies, atkbd->time) && atkbd->last == code) @@ -406,16 +406,16 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, break; } - atkbd_report_key(&atkbd->dev, regs, atkbd->keycode[code], value); + atkbd_report_key(atkbd->dev, regs, atkbd->keycode[code], value); } if (atkbd->scroll) { - input_regs(&atkbd->dev, regs); + input_regs(atkbd->dev, regs); if (click != -1) - input_report_key(&atkbd->dev, BTN_MIDDLE, click); - input_report_rel(&atkbd->dev, REL_WHEEL, scroll); - input_report_rel(&atkbd->dev, REL_HWHEEL, hscroll); - input_sync(&atkbd->dev); + input_report_key(atkbd->dev, BTN_MIDDLE, click); + input_report_rel(atkbd->dev, REL_WHEEL, scroll); + input_report_rel(atkbd->dev, REL_HWHEEL, hscroll); + input_sync(atkbd->dev); } atkbd->release = 0; @@ -463,7 +463,6 @@ static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int co return 0; - case EV_REP: if (atkbd->softrepeat) return 0; @@ -693,7 +692,7 @@ static void atkbd_disconnect(struct serio *serio) device_remove_file(&serio->dev, &atkbd_attr_softrepeat); device_remove_file(&serio->dev, &atkbd_attr_softraw); - input_unregister_device(&atkbd->dev); + input_unregister_device(atkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(atkbd); @@ -701,7 +700,7 @@ static void atkbd_disconnect(struct serio *serio) /* - * atkbd_set_device_attrs() initializes keyboard's keycode table + * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -737,53 +736,58 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) static void atkbd_set_device_attrs(struct atkbd *atkbd) { + struct input_dev *input_dev = atkbd->dev; int i; - memset(&atkbd->dev, 0, sizeof(struct input_dev)); + if (atkbd->extra) + sprintf(atkbd->name, "AT Set 2 Extra keyboard"); + else + sprintf(atkbd->name, "AT %s Set %d keyboard", + atkbd->translated ? "Translated" : "Raw", atkbd->set); - init_input_dev(&atkbd->dev); + sprintf(atkbd->phys, "%s/input0", atkbd->ps2dev.serio->phys); - atkbd->dev.name = atkbd->name; - atkbd->dev.phys = atkbd->phys; - atkbd->dev.id.bustype = BUS_I8042; - atkbd->dev.id.vendor = 0x0001; - atkbd->dev.id.product = atkbd->translated ? 1 : atkbd->set; - atkbd->dev.id.version = atkbd->id; - atkbd->dev.event = atkbd_event; - atkbd->dev.private = atkbd; - atkbd->dev.dev = &atkbd->ps2dev.serio->dev; + input_dev->name = atkbd->name; + input_dev->phys = atkbd->phys; + input_dev->id.bustype = BUS_I8042; + input_dev->id.vendor = 0x0001; + input_dev->id.product = atkbd->translated ? 1 : atkbd->set; + input_dev->id.version = atkbd->id; + input_dev->event = atkbd_event; + input_dev->private = atkbd; + input_dev->cdev.dev = &atkbd->ps2dev.serio->dev; - atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC); if (atkbd->write) { - atkbd->dev.evbit[0] |= BIT(EV_LED); - atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); + input_dev->evbit[0] |= BIT(EV_LED); + input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); } if (atkbd->extra) - atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | + input_dev->ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC); if (!atkbd->softrepeat) { - atkbd->dev.rep[REP_DELAY] = 250; - atkbd->dev.rep[REP_PERIOD] = 33; + input_dev->rep[REP_DELAY] = 250; + input_dev->rep[REP_PERIOD] = 33; } - atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN); + input_dev->mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN); if (atkbd->scroll) { - atkbd->dev.evbit[0] |= BIT(EV_REL); - atkbd->dev.relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL); - set_bit(BTN_MIDDLE, atkbd->dev.keybit); + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL); + set_bit(BTN_MIDDLE, input_dev->keybit); } - atkbd->dev.keycode = atkbd->keycode; - atkbd->dev.keycodesize = sizeof(unsigned char); - atkbd->dev.keycodemax = ARRAY_SIZE(atkbd_set2_keycode); + input_dev->keycode = atkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); for (i = 0; i < 512; i++) if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) - set_bit(atkbd->keycode[i], atkbd->dev.keybit); + set_bit(atkbd->keycode[i], input_dev->keybit); } /* @@ -796,13 +800,15 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd) static int atkbd_connect(struct serio *serio, struct serio_driver *drv) { struct atkbd *atkbd; - int err; - - if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL))) - return - ENOMEM; + struct input_dev *dev; + int err = -ENOMEM; - memset(atkbd, 0, sizeof(struct atkbd)); + atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL); + dev = input_allocate_device(); + if (!atkbd || !dev) + goto fail; + atkbd->dev = dev; ps2_init(&atkbd->ps2dev, serio); switch (serio->id.type) { @@ -828,19 +834,15 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) serio_set_drvdata(serio, atkbd); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(atkbd); - return err; - } + if (err) + goto fail; if (atkbd->write) { if (atkbd_probe(atkbd)) { serio_close(serio); - serio_set_drvdata(serio, NULL); - kfree(atkbd); - return -ENODEV; + err = -ENODEV; + goto fail; } atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); @@ -851,19 +853,9 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd->id = 0xab00; } - if (atkbd->extra) - sprintf(atkbd->name, "AT Set 2 Extra keyboard"); - else - sprintf(atkbd->name, "AT %s Set %d keyboard", - atkbd->translated ? "Translated" : "Raw", atkbd->set); - - sprintf(atkbd->phys, "%s/input0", serio->phys); - atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); - device_create_file(&serio->dev, &atkbd_attr_extra); device_create_file(&serio->dev, &atkbd_attr_scroll); device_create_file(&serio->dev, &atkbd_attr_set); @@ -872,9 +864,14 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd_enable(atkbd); - printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys); + input_register_device(atkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(dev); + kfree(atkbd); + return err; } /* @@ -896,9 +893,9 @@ static int atkbd_reconnect(struct serio *serio) atkbd_disable(atkbd); if (atkbd->write) { - param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0) - | (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0) - | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0); + param[0] = (test_bit(LED_SCROLLL, atkbd->dev->led) ? 1 : 0) + | (test_bit(LED_NUML, atkbd->dev->led) ? 2 : 0) + | (test_bit(LED_CAPSL, atkbd->dev->led) ? 4 : 0); if (atkbd_probe(atkbd)) return -1; @@ -1008,6 +1005,7 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1019,12 +1017,19 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun return -EINVAL; if (atkbd->extra != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + /* + * Since device's properties will change we need to + * unregister old device. But allocate new one first + * to make sure we have it. + */ + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); atkbd_activate(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } @@ -1036,6 +1041,7 @@ static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1044,12 +1050,14 @@ static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t cou return -EINVAL; if (atkbd->scroll != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->scroll = value; atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } @@ -1061,6 +1069,7 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1072,13 +1081,15 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) return -EINVAL; if (atkbd->set != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } @@ -1090,6 +1101,7 @@ static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1101,15 +1113,16 @@ static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t return -EINVAL; if (atkbd->softrepeat != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->softrepeat = value; if (atkbd->softrepeat) atkbd->softraw = 1; atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } - return count; } @@ -1121,6 +1134,7 @@ static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1129,11 +1143,13 @@ static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t co return -EINVAL; if (atkbd->softraw != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->softraw = value; atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index cd4b6e795013..564bb365f6fc 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -70,8 +70,7 @@ static unsigned char corgikbd_keycode[NR_SCANCODES] = { struct corgikbd { unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)]; - struct input_dev input; - char phys[32]; + struct input_dev *input; spinlock_t lock; struct timer_list timer; @@ -147,7 +146,7 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs spin_lock_irqsave(&corgikbd_data->lock, flags); if (regs) - input_regs(&corgikbd_data->input, regs); + input_regs(corgikbd_data->input, regs); num_pressed = 0; for (col = 0; col < KB_COLS; col++) { @@ -169,14 +168,14 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs scancode = SCANCODE(row, col); pressed = rowd & KB_ROWMASK(row); - input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); + input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); if (pressed) num_pressed++; if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF) && time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) { - input_event(&corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); + input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); corgikbd_data->suspend_jiffies=jiffies; } } @@ -185,7 +184,7 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs corgikbd_activate_all(); - input_sync(&corgikbd_data->input); + input_sync(corgikbd_data->input); /* if any keys are pressed, enable the timer */ if (num_pressed) @@ -249,9 +248,9 @@ static void corgikbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&corgikbd_data->lock, flags); - input_report_switch(&corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); - input_report_switch(&corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); - input_sync(&corgikbd_data->input); + input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); + input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); + input_sync(corgikbd_data->input); spin_unlock_irqrestore(&corgikbd_data->lock, flags); } @@ -287,16 +286,21 @@ static int corgikbd_resume(struct device *dev, uint32_t level) static int __init corgikbd_probe(struct device *dev) { - int i; struct corgikbd *corgikbd; + struct input_dev *input_dev; + int i; corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL); - if (!corgikbd) + input_dev = input_allocate_device(); + if (!corgikbd || !input_dev) { + kfree(corgikbd); + input_free_device(input_dev); return -ENOMEM; + } - dev_set_drvdata(dev,corgikbd); - strcpy(corgikbd->phys, "corgikbd/input0"); + dev_set_drvdata(dev, corgikbd); + corgikbd->input = input_dev; spin_lock_init(&corgikbd->lock); /* Init Keyboard rescan timer */ @@ -311,28 +315,30 @@ static int __init corgikbd_probe(struct device *dev) corgikbd->suspend_jiffies=jiffies; - init_input_dev(&corgikbd->input); - corgikbd->input.private = corgikbd; - corgikbd->input.name = "Corgi Keyboard"; - corgikbd->input.dev = dev; - corgikbd->input.phys = corgikbd->phys; - corgikbd->input.id.bustype = BUS_HOST; - corgikbd->input.id.vendor = 0x0001; - corgikbd->input.id.product = 0x0001; - corgikbd->input.id.version = 0x0100; - corgikbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); - corgikbd->input.keycode = corgikbd->keycode; - corgikbd->input.keycodesize = sizeof(unsigned char); - corgikbd->input.keycodemax = ARRAY_SIZE(corgikbd_keycode); - memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode)); + + input_dev->name = "Corgi Keyboard"; + input_dev->phys = "corgikbd/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = dev; + input_dev->private = corgikbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); + input_dev->keycode = corgikbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode); + for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++) - set_bit(corgikbd->keycode[i], corgikbd->input.keybit); - clear_bit(0, corgikbd->input.keybit); - set_bit(SW_0, corgikbd->input.swbit); - set_bit(SW_1, corgikbd->input.swbit); + set_bit(corgikbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + set_bit(SW_0, input_dev->swbit); + set_bit(SW_1, input_dev->swbit); + + input_register_device(corgikbd->input); - input_register_device(&corgikbd->input); mod_timer(&corgikbd->htimer, jiffies + HINGE_SCAN_INTERVAL); /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ @@ -349,8 +355,6 @@ static int __init corgikbd_probe(struct device *dev) for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); - printk(KERN_INFO "input: Corgi Keyboard Registered\n"); - return 0; } @@ -365,7 +369,7 @@ static int corgikbd_remove(struct device *dev) del_timer_sync(&corgikbd->htimer); del_timer_sync(&corgikbd->timer); - input_unregister_device(&corgikbd->input); + input_unregister_device(corgikbd->input); kfree(corgikbd); diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index 098963c7cdd6..7f06780a437f 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c @@ -102,7 +102,7 @@ static int ctrlclick_volume = 100; /* % */ module_param (ctrlclick_volume, int, 0); MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%"); -static int lk201_compose_is_alt = 0; +static int lk201_compose_is_alt; module_param (lk201_compose_is_alt, int, 0); MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key " "will act as an Alt key"); @@ -274,7 +274,7 @@ static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = { }; #define CHECK_LED(LED, BITS) do { \ - if (test_bit (LED, lk->dev.led)) \ + if (test_bit (LED, lk->dev->led)) \ leds_on |= BITS; \ else \ leds_off |= BITS; \ @@ -287,7 +287,7 @@ struct lkkbd { lk_keycode_t keycode[LK_NUM_KEYCODES]; int ignore_bytes; unsigned char id[LK_NUM_IGNORE_BYTES]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; struct work_struct tq; char name[64]; @@ -423,8 +423,7 @@ lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags, DBG (KERN_INFO "Got byte 0x%02x\n", data); if (lk->ignore_bytes > 0) { - DBG (KERN_INFO "Ignoring a byte on %s\n", - lk->name); + DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name); lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; if (lk->ignore_bytes == 0) @@ -435,14 +434,14 @@ lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags, switch (data) { case LK_ALL_KEYS_UP: - input_regs (&lk->dev, regs); + input_regs (lk->dev, regs); for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++) if (lk->keycode[i] != KEY_RESERVED) - input_report_key (&lk->dev, lk->keycode[i], 0); - input_sync (&lk->dev); + input_report_key (lk->dev, lk->keycode[i], 0); + input_sync (lk->dev); break; case LK_METRONOME: - DBG (KERN_INFO "Got LK_METRONOME and don't " + DBG (KERN_INFO "Got %#d and don't " "know how to handle...\n"); break; case LK_OUTPUT_ERROR: @@ -482,12 +481,12 @@ lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags, default: if (lk->keycode[data] != KEY_RESERVED) { - input_regs (&lk->dev, regs); - if (!test_bit (lk->keycode[data], lk->dev.key)) - input_report_key (&lk->dev, lk->keycode[data], 1); + input_regs (lk->dev, regs); + if (!test_bit (lk->keycode[data], lk->dev->key)) + input_report_key (lk->dev, lk->keycode[data], 1); else - input_report_key (&lk->dev, lk->keycode[data], 0); - input_sync (&lk->dev); + input_report_key (lk->dev, lk->keycode[data], 0); + input_sync (lk->dev); } else printk (KERN_WARNING "%s: Unknown key with " "scancode 0x%02x on %s.\n", @@ -605,7 +604,7 @@ lkkbd_reinit (void *data) lk->serio->write (lk->serio, volume_to_hw (lk->bell_volume)); /* Enable/disable keyclick (and possibly set volume) */ - if (test_bit (SND_CLICK, lk->dev.snd)) { + if (test_bit (SND_CLICK, lk->dev->snd)) { lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK); lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume)); lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK); @@ -616,7 +615,7 @@ lkkbd_reinit (void *data) } /* Sound the bell if needed */ - if (test_bit (SND_BELL, lk->dev.snd)) + if (test_bit (SND_BELL, lk->dev->snd)) lk->serio->write (lk->serio, LK_CMD_SOUND_BELL); } @@ -627,71 +626,70 @@ static int lkkbd_connect (struct serio *serio, struct serio_driver *drv) { struct lkkbd *lk; + struct input_dev *input_dev; int i; int err; - if (!(lk = kmalloc (sizeof (struct lkkbd), GFP_KERNEL))) - return -ENOMEM; - - memset (lk, 0, sizeof (struct lkkbd)); - - init_input_dev (&lk->dev); - set_bit (EV_KEY, lk->dev.evbit); - set_bit (EV_LED, lk->dev.evbit); - set_bit (EV_SND, lk->dev.evbit); - set_bit (EV_REP, lk->dev.evbit); - set_bit (LED_CAPSL, lk->dev.ledbit); - set_bit (LED_SLEEP, lk->dev.ledbit); - set_bit (LED_COMPOSE, lk->dev.ledbit); - set_bit (LED_SCROLLL, lk->dev.ledbit); - set_bit (SND_BELL, lk->dev.sndbit); - set_bit (SND_CLICK, lk->dev.sndbit); + lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL); + input_dev = input_allocate_device (); + if (!lk || !input_dev) { + err = -ENOMEM; + goto fail; + } lk->serio = serio; - + lk->dev = input_dev; INIT_WORK (&lk->tq, lkkbd_reinit, lk); - lk->bell_volume = bell_volume; lk->keyclick_volume = keyclick_volume; lk->ctrlclick_volume = ctrlclick_volume; + memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES); - lk->dev.keycode = lk->keycode; - lk->dev.keycodesize = sizeof (lk_keycode_t); - lk->dev.keycodemax = LK_NUM_KEYCODES; - - lk->dev.event = lkkbd_event; - lk->dev.private = lk; + strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name)); + snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys); + + input_dev->name = lk->name; + input_dev->phys = lk->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_LKKBD; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->event = lkkbd_event; + input_dev->private = lk; + + set_bit (EV_KEY, input_dev->evbit); + set_bit (EV_LED, input_dev->evbit); + set_bit (EV_SND, input_dev->evbit); + set_bit (EV_REP, input_dev->evbit); + set_bit (LED_CAPSL, input_dev->ledbit); + set_bit (LED_SLEEP, input_dev->ledbit); + set_bit (LED_COMPOSE, input_dev->ledbit); + set_bit (LED_SCROLLL, input_dev->ledbit); + set_bit (SND_BELL, input_dev->sndbit); + set_bit (SND_CLICK, input_dev->sndbit); + + input_dev->keycode = lk->keycode; + input_dev->keycodesize = sizeof (lk_keycode_t); + input_dev->keycodemax = LK_NUM_KEYCODES; + for (i = 0; i < LK_NUM_KEYCODES; i++) + set_bit (lk->keycode[i], input_dev->keybit); serio_set_drvdata (serio, lk); err = serio_open (serio, drv); - if (err) { - serio_set_drvdata (serio, NULL); - kfree (lk); - return err; - } + if (err) + goto fail; - sprintf (lk->name, "DEC LK keyboard"); - sprintf (lk->phys, "%s/input0", serio->phys); - - memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES); - for (i = 0; i < LK_NUM_KEYCODES; i++) - set_bit (lk->keycode[i], lk->dev.keybit); - - lk->dev.name = lk->name; - lk->dev.phys = lk->phys; - lk->dev.id.bustype = BUS_RS232; - lk->dev.id.vendor = SERIO_LKKBD; - lk->dev.id.product = 0; - lk->dev.id.version = 0x0100; - lk->dev.dev = &serio->dev; - - input_register_device (&lk->dev); - - printk (KERN_INFO "input: %s on %s, initiating reset\n", lk->name, serio->phys); + input_register_device (lk->dev); lk->serio->write (lk->serio, LK_CMD_POWERCYCLE_RESET); return 0; + + fail: serio_set_drvdata (serio, NULL); + input_free_device (input_dev); + kfree (lk); + return err; } /* @@ -702,9 +700,11 @@ lkkbd_disconnect (struct serio *serio) { struct lkkbd *lk = serio_get_drvdata (serio); - input_unregister_device (&lk->dev); + input_get_device (lk->dev); + input_unregister_device (lk->dev); serio_close (serio); serio_set_drvdata (serio, NULL); + input_put_device (lk->dev); kfree (lk); } diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index eecbde294f1f..cc6aaf9e85be 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -37,7 +37,7 @@ static unsigned char dc_kbd_keycode[256] = { struct dc_kbd { - struct input_dev dev; + struct input_dev *dev; unsigned char new[8]; unsigned char old[8]; }; @@ -46,30 +46,24 @@ struct dc_kbd { static void dc_scan_kbd(struct dc_kbd *kbd) { int i; - struct input_dev *dev = &kbd->dev; + struct input_dev *dev = kbd->dev; - for(i=0; i<8; i++) - input_report_key(dev, - dc_kbd_keycode[i+224], - (kbd->new[0]>>i)&1); + for (i = 0; i < 8; i++) + input_report_key(dev, dc_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); - for(i=2; i<8; i++) { + for (i = 2; i < 8; i++) { - if(kbd->old[i]>3&&memscan(kbd->new+2, kbd->old[i], 6)==NULL) { - if(dc_kbd_keycode[kbd->old[i]]) - input_report_key(dev, - dc_kbd_keycode[kbd->old[i]], - 0); + if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == NULL) { + if (dc_kbd_keycode[kbd->old[i]]) + input_report_key(dev, dc_kbd_keycode[kbd->old[i]], 0); else printk("Unknown key (scancode %#x) released.", kbd->old[i]); } - if(kbd->new[i]>3&&memscan(kbd->old+2, kbd->new[i], 6)!=NULL) { + if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) != NULL) { if(dc_kbd_keycode[kbd->new[i]]) - input_report_key(dev, - dc_kbd_keycode[kbd->new[i]], - 1); + input_report_key(dev, dc_kbd_keycode[kbd->new[i]], 1); else printk("Unknown key (scancode %#x) pressed.", kbd->new[i]); @@ -89,43 +83,39 @@ static void dc_kbd_callback(struct mapleq *mq) unsigned long *buf = mq->recvbuf; if (buf[1] == mapledev->function) { - memcpy(kbd->new, buf+2, 8); + memcpy(kbd->new, buf + 2, 8); dc_scan_kbd(kbd); } } static int dc_kbd_connect(struct maple_device *dev) { - int i; - unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]); struct dc_kbd *kbd; + struct input_dev *input_dev; + unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]); + int i; - if (!(kbd = kmalloc(sizeof(struct dc_kbd), GFP_KERNEL))) - return -1; - memset(kbd, 0, sizeof(struct dc_kbd)); - - dev->private_data = kbd; - - kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - - init_input_dev(&kbd->dev); - - for (i=0; i<255; i++) - set_bit(dc_kbd_keycode[i], kbd->dev.keybit); - - clear_bit(0, kbd->dev.keybit); + dev->private_data = kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbd || !input_dev) { + kfree(kbd); + input_free_device(input_dev); + return -ENOMEM; + } - kbd->dev.private = kbd; + kbd->dev = input_dev; - kbd->dev.name = dev->product_name; - kbd->dev.id.bustype = BUS_MAPLE; + input_dev->name = dev->product_name; + input_dev->id.bustype = BUS_MAPLE; + input_dev->private = kbd; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + for (i = 0; i < 255; i++) + set_bit(dc_kbd_keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - input_register_device(&kbd->dev); + input_register_device(kbd->dev); maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD); - - printk(KERN_INFO "input: keyboard(0x%lx): %s\n", data, kbd->dev.name); - return 0; } @@ -134,7 +124,7 @@ static void dc_kbd_disconnect(struct maple_device *dev) { struct dc_kbd *kbd = dev->private_data; - input_unregister_device(&kbd->dev); + input_unregister_device(kbd->dev); kfree(kbd); } diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c index 2e8ce1613eec..d10983c521e6 100644 --- a/drivers/input/keyboard/newtonkbd.c +++ b/drivers/input/keyboard/newtonkbd.c @@ -57,11 +57,9 @@ static unsigned char nkbd_keycode[128] = { KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0 }; -static char *nkbd_name = "Newton Keyboard"; - struct nkbd { unsigned char keycode[128]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; char phys[32]; }; @@ -73,13 +71,13 @@ static irqreturn_t nkbd_interrupt(struct serio *serio, /* invalid scan codes are probably the init sequence, so we ignore them */ if (nkbd->keycode[data & NKBD_KEY]) { - input_regs(&nkbd->dev, regs); - input_report_key(&nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); - input_sync(&nkbd->dev); + input_regs(nkbd->dev, regs); + input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); + input_sync(nkbd->dev); } else if (data == 0xe7) /* end of init sequence */ - printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys); + printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys); return IRQ_HANDLED; } @@ -87,62 +85,59 @@ static irqreturn_t nkbd_interrupt(struct serio *serio, static int nkbd_connect(struct serio *serio, struct serio_driver *drv) { struct nkbd *nkbd; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(nkbd = kmalloc(sizeof(struct nkbd), GFP_KERNEL))) - return -ENOMEM; - - memset(nkbd, 0, sizeof(struct nkbd)); - nkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!nkbd || !input_dev) + goto fail; nkbd->serio = serio; + nkbd->dev = input_dev; + sprintf(nkbd->phys, "%s/input0", serio->phys); + memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); - init_input_dev(&nkbd->dev); - nkbd->dev.keycode = nkbd->keycode; - nkbd->dev.keycodesize = sizeof(unsigned char); - nkbd->dev.keycodemax = ARRAY_SIZE(nkbd_keycode); - nkbd->dev.private = nkbd; + input_dev->name = "Newton Keyboard"; + input_dev->phys = nkbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_NEWTON; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = nkbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->keycode = nkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode); + for (i = 0; i < 128; i++) + set_bit(nkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); serio_set_drvdata(serio, nkbd); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(nkbd); - return err; - } - - memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); - for (i = 0; i < 128; i++) - set_bit(nkbd->keycode[i], nkbd->dev.keybit); - clear_bit(0, nkbd->dev.keybit); - - sprintf(nkbd->phys, "%s/input0", serio->phys); - - nkbd->dev.name = nkbd_name; - nkbd->dev.phys = nkbd->phys; - nkbd->dev.id.bustype = BUS_RS232; - nkbd->dev.id.vendor = SERIO_NEWTON; - nkbd->dev.id.product = 0x0001; - nkbd->dev.id.version = 0x0100; - nkbd->dev.dev = &serio->dev; - - input_register_device(&nkbd->dev); - - printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys); + if (err) + goto fail; + input_register_device(nkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(nkbd); + return err; } static void nkbd_disconnect(struct serio *serio) { struct nkbd *nkbd = serio_get_drvdata(serio); - input_unregister_device(&nkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(nkbd->dev); kfree(nkbd); } diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 344f46005401..732fb310e487 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -85,7 +85,7 @@ static int spitz_senses[] = { struct spitzkbd { unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)]; - struct input_dev input; + struct input_dev *input; char phys[32]; spinlock_t lock; @@ -187,8 +187,7 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs spin_lock_irqsave(&spitzkbd_data->lock, flags); - if (regs) - input_regs(&spitzkbd_data->input, regs); + input_regs(spitzkbd_data->input, regs); num_pressed = 0; for (col = 0; col < KB_COLS; col++) { @@ -210,7 +209,7 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs scancode = SCANCODE(row, col); pressed = rowd & KB_ROWMASK(row); - input_report_key(&spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed); + input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed); if (pressed) num_pressed++; @@ -220,15 +219,15 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs spitzkbd_activate_all(); - input_report_key(&spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 ); - input_report_key(&spitzkbd_data->input, KEY_SUSPEND, pwrkey); + input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 ); + input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey); if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) { - input_event(&spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1); + input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1); spitzkbd_data->suspend_jiffies = jiffies; } - input_sync(&spitzkbd_data->input); + input_sync(spitzkbd_data->input); /* if any keys are pressed, enable the timer */ if (num_pressed) @@ -259,6 +258,7 @@ static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id, struct pt_regs *reg static void spitzkbd_timer_callback(unsigned long data) { struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; + spitzkbd_scankeyboard(spitzkbd_data, NULL); } @@ -298,9 +298,9 @@ static void spitzkbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&spitzkbd_data->lock, flags); - input_report_switch(&spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); - input_report_switch(&spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); - input_sync(&spitzkbd_data->input); + input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); + input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); + input_sync(spitzkbd_data->input); spin_unlock_irqrestore(&spitzkbd_data->lock, flags); } else { @@ -346,14 +346,21 @@ static int spitzkbd_resume(struct device *dev, uint32_t level) static int __init spitzkbd_probe(struct device *dev) { - int i; struct spitzkbd *spitzkbd; + struct input_dev *input_dev; + int i; spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL); if (!spitzkbd) return -ENOMEM; - dev_set_drvdata(dev,spitzkbd); + input_dev = input_allocate_device(); + if (!input_dev) { + kfree(spitzkbd); + return -ENOMEM; + } + + dev_set_drvdata(dev, spitzkbd); strcpy(spitzkbd->phys, "spitzkbd/input0"); spin_lock_init(&spitzkbd->lock); @@ -368,30 +375,34 @@ static int __init spitzkbd_probe(struct device *dev) spitzkbd->htimer.function = spitzkbd_hinge_timer; spitzkbd->htimer.data = (unsigned long) spitzkbd; - spitzkbd->suspend_jiffies=jiffies; - - init_input_dev(&spitzkbd->input); - spitzkbd->input.private = spitzkbd; - spitzkbd->input.name = "Spitz Keyboard"; - spitzkbd->input.dev = dev; - spitzkbd->input.phys = spitzkbd->phys; - spitzkbd->input.id.bustype = BUS_HOST; - spitzkbd->input.id.vendor = 0x0001; - spitzkbd->input.id.product = 0x0001; - spitzkbd->input.id.version = 0x0100; - spitzkbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); - spitzkbd->input.keycode = spitzkbd->keycode; - spitzkbd->input.keycodesize = sizeof(unsigned char); - spitzkbd->input.keycodemax = ARRAY_SIZE(spitzkbd_keycode); + spitzkbd->suspend_jiffies = jiffies; + + spitzkbd->input = input_dev; + + input_dev->private = spitzkbd; + input_dev->name = "Spitz Keyboard"; + input_dev->phys = spitzkbd->phys; + input_dev->cdev.dev = dev; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); + input_dev->keycode = spitzkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode); memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode)); for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++) - set_bit(spitzkbd->keycode[i], spitzkbd->input.keybit); - clear_bit(0, spitzkbd->input.keybit); - set_bit(SW_0, spitzkbd->input.swbit); - set_bit(SW_1, spitzkbd->input.swbit); + set_bit(spitzkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + set_bit(SW_0, input_dev->swbit); + set_bit(SW_1, input_dev->swbit); + + input_register_device(input_dev); - input_register_device(&spitzkbd->input); mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ @@ -444,7 +455,7 @@ static int spitzkbd_remove(struct device *dev) del_timer_sync(&spitzkbd->htimer); del_timer_sync(&spitzkbd->timer); - input_unregister_device(&spitzkbd->input); + input_unregister_device(spitzkbd->input); kfree(spitzkbd); diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c index 4bae5d89348d..b15b6d8d4f83 100644 --- a/drivers/input/keyboard/sunkbd.c +++ b/drivers/input/keyboard/sunkbd.c @@ -76,13 +76,14 @@ static unsigned char sunkbd_keycode[128] = { struct sunkbd { unsigned char keycode[128]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; struct work_struct tq; wait_queue_head_t wait; char name[64]; char phys[32]; char type; + unsigned char enabled; volatile s8 reset; volatile s8 layout; }; @@ -124,10 +125,13 @@ static irqreturn_t sunkbd_interrupt(struct serio *serio, break; default: + if (!sunkbd->enabled) + break; + if (sunkbd->keycode[data & SUNKBD_KEY]) { - input_regs(&sunkbd->dev, regs); - input_report_key(&sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE)); - input_sync(&sunkbd->dev); + input_regs(sunkbd->dev, regs); + input_report_key(sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE)); + input_sync(sunkbd->dev); } else { printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n", data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed"); @@ -184,7 +188,7 @@ static int sunkbd_initialize(struct sunkbd *sunkbd) sunkbd->reset = -2; sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET); wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ); - if (sunkbd->reset <0) + if (sunkbd->reset < 0) return -1; sunkbd->type = sunkbd->reset; @@ -213,10 +217,17 @@ static void sunkbd_reinit(void *data) sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED); sunkbd->serio->write(sunkbd->serio, - (!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) | - (!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led)); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd)); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev.snd)); + (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) | + (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | !!test_bit(LED_NUML, sunkbd->dev->led)); + sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); + sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); +} + +static void sunkbd_enable(struct sunkbd *sunkbd, int enable) +{ + serio_pause_rx(sunkbd->serio); + sunkbd->enabled = 1; + serio_continue_rx(sunkbd->serio); } /* @@ -226,70 +237,64 @@ static void sunkbd_reinit(void *data) static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) { struct sunkbd *sunkbd; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL))) - return -ENOMEM; - memset(sunkbd, 0, sizeof(struct sunkbd)); - - init_input_dev(&sunkbd->dev); - init_waitqueue_head(&sunkbd->wait); - - sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP); - sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML); - sunkbd->dev.sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL); + sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!sunkbd || !input_dev) + goto fail; sunkbd->serio = serio; - + sunkbd->dev = input_dev; + init_waitqueue_head(&sunkbd->wait); INIT_WORK(&sunkbd->tq, sunkbd_reinit, sunkbd); - - sunkbd->dev.keycode = sunkbd->keycode; - sunkbd->dev.keycodesize = sizeof(unsigned char); - sunkbd->dev.keycodemax = ARRAY_SIZE(sunkbd_keycode); - - sunkbd->dev.event = sunkbd_event; - sunkbd->dev.private = sunkbd; + snprintf(sunkbd->phys, sizeof(sunkbd->phys), "%s/input0", serio->phys); serio_set_drvdata(serio, sunkbd); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(sunkbd); - return err; - } + if (err) + goto fail; if (sunkbd_initialize(sunkbd) < 0) { serio_close(serio); - serio_set_drvdata(serio, NULL); - kfree(sunkbd); - return -ENODEV; + goto fail; } sprintf(sunkbd->name, "Sun Type %d keyboard", sunkbd->type); - memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode)); - for (i = 0; i < 128; i++) - set_bit(sunkbd->keycode[i], sunkbd->dev.keybit); - clear_bit(0, sunkbd->dev.keybit); - - sprintf(sunkbd->phys, "%s/input0", serio->phys); - - sunkbd->dev.name = sunkbd->name; - sunkbd->dev.phys = sunkbd->phys; - sunkbd->dev.id.bustype = BUS_RS232; - sunkbd->dev.id.vendor = SERIO_SUNKBD; - sunkbd->dev.id.product = sunkbd->type; - sunkbd->dev.id.version = 0x0100; - sunkbd->dev.dev = &serio->dev; - input_register_device(&sunkbd->dev); - - printk(KERN_INFO "input: %s on %s\n", sunkbd->name, serio->phys); + input_dev->name = sunkbd->name; + input_dev->phys = sunkbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SUNKBD; + input_dev->id.product = sunkbd->type; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = sunkbd; + input_dev->event = sunkbd_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML); + input_dev->sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL); + + input_dev->keycode = sunkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode); + for (i = 0; i < 128; i++) + set_bit(sunkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + sunkbd_enable(sunkbd, 1); + input_register_device(sunkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(sunkbd); + return err; } /* @@ -299,7 +304,9 @@ static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) static void sunkbd_disconnect(struct serio *serio) { struct sunkbd *sunkbd = serio_get_drvdata(serio); - input_unregister_device(&sunkbd->dev); + + sunkbd_enable(sunkbd, 0); + input_unregister_device(sunkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(sunkbd); diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c index 19eaec7789d1..4135e3e16c51 100644 --- a/drivers/input/keyboard/xtkbd.c +++ b/drivers/input/keyboard/xtkbd.c @@ -56,11 +56,9 @@ static unsigned char xtkbd_keycode[256] = { 106 }; -static char *xtkbd_name = "XT Keyboard"; - struct xtkbd { unsigned char keycode[256]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; char phys[32]; }; @@ -77,9 +75,9 @@ static irqreturn_t xtkbd_interrupt(struct serio *serio, default: if (xtkbd->keycode[data & XTKBD_KEY]) { - input_regs(&xtkbd->dev, regs); - input_report_key(&xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE)); - input_sync(&xtkbd->dev); + input_regs(xtkbd->dev, regs); + input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE)); + input_sync(xtkbd->dev); } else { printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n", data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed"); @@ -91,62 +89,60 @@ static irqreturn_t xtkbd_interrupt(struct serio *serio, static int xtkbd_connect(struct serio *serio, struct serio_driver *drv) { struct xtkbd *xtkbd; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL))) - return -ENOMEM; - - memset(xtkbd, 0, sizeof(struct xtkbd)); - xtkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xtkbd || !input_dev) + goto fail; xtkbd->serio = serio; + xtkbd->dev = input_dev; + sprintf(xtkbd->phys, "%s/input0", serio->phys); + memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode)); - init_input_dev(&xtkbd->dev); - xtkbd->dev.keycode = xtkbd->keycode; - xtkbd->dev.keycodesize = sizeof(unsigned char); - xtkbd->dev.keycodemax = ARRAY_SIZE(xtkbd_keycode); - xtkbd->dev.private = xtkbd; - - serio_set_drvdata(serio, xtkbd); + input_dev->name = "XT Keyboard"; + input_dev->phys = xtkbd->phys; + input_dev->id.bustype = BUS_XTKBD; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = xtkbd; - err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(xtkbd); - return err; - } + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->keycode = xtkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(xtkbd_keycode); - memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode)); for (i = 0; i < 255; i++) - set_bit(xtkbd->keycode[i], xtkbd->dev.keybit); - clear_bit(0, xtkbd->dev.keybit); - - sprintf(xtkbd->phys, "%s/input0", serio->phys); - - xtkbd->dev.name = xtkbd_name; - xtkbd->dev.phys = xtkbd->phys; - xtkbd->dev.id.bustype = BUS_XTKBD; - xtkbd->dev.id.vendor = 0x0001; - xtkbd->dev.id.product = 0x0001; - xtkbd->dev.id.version = 0x0100; - xtkbd->dev.dev = &serio->dev; + set_bit(xtkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - input_register_device(&xtkbd->dev); + serio_set_drvdata(serio, xtkbd); - printk(KERN_INFO "input: %s on %s\n", xtkbd_name, serio->phys); + err = serio_open(serio, drv); + if (err) + goto fail; + input_register_device(xtkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(xtkbd); + return err; } static void xtkbd_disconnect(struct serio *serio) { struct xtkbd *xtkbd = serio_get_drvdata(serio); - input_unregister_device(&xtkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(xtkbd->dev); kfree(xtkbd); } -- cgit v1.2.3 From c5b7c7c395a34f12cdf246d66c1feeff2933d584 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:47 -0500 Subject: [PATCH] drivers/usb/input: convert to dynamic input_dev allocation Input: convert drivers/iusb/input to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/acecad.c | 76 +++++++------- drivers/usb/input/aiptek.c | 209 ++++++++++++++++-------------------- drivers/usb/input/appletouch.c | 130 ++++++++++++----------- drivers/usb/input/ati_remote.c | 173 +++++++++++++++--------------- drivers/usb/input/hid-core.c | 51 ++++----- drivers/usb/input/hid-input.c | 56 +++++----- drivers/usb/input/hid-lgff.c | 17 ++- drivers/usb/input/hid-tmff.c | 11 +- drivers/usb/input/hid.h | 2 +- drivers/usb/input/itmtouch.c | 70 ++++++++----- drivers/usb/input/kbtab.c | 82 +++++++-------- drivers/usb/input/keyspan_remote.c | 210 +++++++++++++++---------------------- drivers/usb/input/mtouchusb.c | 111 ++++++++++---------- drivers/usb/input/pid.c | 12 ++- drivers/usb/input/powermate.c | 136 ++++++++++++------------ drivers/usb/input/touchkitusb.c | 116 ++++++++++---------- drivers/usb/input/usbkbd.c | 105 ++++++++++--------- drivers/usb/input/usbmouse.c | 93 ++++++++-------- drivers/usb/input/wacom.c | 142 ++++++++++++------------- drivers/usb/input/xpad.c | 95 ++++++++--------- drivers/usb/input/yealink.c | 66 ++++++------ 21 files changed, 961 insertions(+), 1002 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index 74f8760d7c07..a32558b4048e 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -53,7 +53,7 @@ struct usb_acecad { char name[128]; char phys[64]; struct usb_device *usbdev; - struct input_dev dev; + struct input_dev *input; struct urb *irq; signed char *data; @@ -64,7 +64,7 @@ static void usb_acecad_irq(struct urb *urb, struct pt_regs *regs) { struct usb_acecad *acecad = urb->context; unsigned char *data = acecad->data; - struct input_dev *dev = &acecad->dev; + struct input_dev *dev = acecad->input; int prox, status; switch (urb->status) { @@ -135,8 +135,8 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct usb_acecad *acecad; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; if (interface->desc.bNumEndpoints != 1) return -ENODEV; @@ -153,8 +153,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL); - if (!acecad) - return -ENOMEM; + input_dev = input_allocate_device(); + if (!acecad || !input_dev) + goto fail1; acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma); if (!acecad->data) @@ -164,6 +165,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ if (!acecad->irq) goto fail2; + acecad->usbdev = dev; + acecad->input = input_dev; + if (dev->manufacturer) strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name)); @@ -173,48 +177,48 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ strlcat(acecad->name, dev->product, sizeof(acecad->name)); } - usb_make_path(dev, path, sizeof(path)); - snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path); + usb_make_path(dev, acecad->phys, sizeof(acecad->phys)); + strlcat(acecad->phys, "/input0", sizeof(acecad->phys)); - acecad->usbdev = dev; + input_dev->name = acecad->name; + input_dev->phys = acecad->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = acecad; - acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); + input_dev->open = usb_acecad_open; + input_dev->close = usb_acecad_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); switch (id->driver_info) { case 0: - acecad->dev.absmax[ABS_X] = 5000; - acecad->dev.absmax[ABS_Y] = 3750; - acecad->dev.absmax[ABS_PRESSURE] = 512; + input_dev->absmax[ABS_X] = 5000; + input_dev->absmax[ABS_Y] = 3750; + input_dev->absmax[ABS_PRESSURE] = 512; if (!strlen(acecad->name)) snprintf(acecad->name, sizeof(acecad->name), "USB Acecad Flair Tablet %04x:%04x", - dev->descriptor.idVendor, dev->descriptor.idProduct); + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); break; case 1: - acecad->dev.absmax[ABS_X] = 3000; - acecad->dev.absmax[ABS_Y] = 2250; - acecad->dev.absmax[ABS_PRESSURE] = 1024; + input_dev->absmax[ABS_X] = 3000; + input_dev->absmax[ABS_Y] = 2250; + input_dev->absmax[ABS_PRESSURE] = 1024; if (!strlen(acecad->name)) snprintf(acecad->name, sizeof(acecad->name), "USB Acecad 302 Tablet %04x:%04x", - dev->descriptor.idVendor, dev->descriptor.idProduct); + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); break; } - acecad->dev.absfuzz[ABS_X] = 4; - acecad->dev.absfuzz[ABS_Y] = 4; - - acecad->dev.private = acecad; - acecad->dev.open = usb_acecad_open; - acecad->dev.close = usb_acecad_close; - - acecad->dev.name = acecad->name; - acecad->dev.phys = acecad->phys; - usb_to_input_id(dev, &acecad->dev.id); - acecad->dev.dev = &intf->dev; + input_dev->absfuzz[ABS_X] = 4; + input_dev->absfuzz[ABS_Y] = 4; usb_fill_int_urb(acecad->irq, dev, pipe, acecad->data, maxp > 8 ? 8 : maxp, @@ -222,17 +226,15 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ acecad->irq->transfer_dma = acecad->data_dma; acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&acecad->dev); - - printk(KERN_INFO "input: %s with packet size %d on %s\n", - acecad->name, maxp, path); + input_register_device(acecad->input); usb_set_intfdata(intf, acecad); return 0; fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma); - fail1: kfree(acecad); + fail1: input_free_device(input_dev); + kfree(acecad); return -ENOMEM; } @@ -243,7 +245,7 @@ static void usb_acecad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (acecad) { usb_kill_urb(acecad->irq); - input_unregister_device(&acecad->dev); + input_unregister_device(acecad->input); usb_free_urb(acecad->irq); usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma); kfree(acecad); diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index cd0cbfe20723..1c5205321d83 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -317,7 +317,7 @@ struct aiptek_settings { }; struct aiptek { - struct input_dev inputdev; /* input device struct */ + struct input_dev *inputdev; /* input device struct */ struct usb_device *usbdev; /* usb device struct */ struct urb *urb; /* urb for incoming reports */ dma_addr_t data_dma; /* our dma stuffage */ @@ -402,7 +402,7 @@ static void aiptek_irq(struct urb *urb, struct pt_regs *regs) { struct aiptek *aiptek = urb->context; unsigned char *data = aiptek->data; - struct input_dev *inputdev = &aiptek->inputdev; + struct input_dev *inputdev = aiptek->inputdev; int jitterable = 0; int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; @@ -955,20 +955,20 @@ static int aiptek_program_tablet(struct aiptek *aiptek) /* Query getXextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) return ret; - aiptek->inputdev.absmin[ABS_X] = 0; - aiptek->inputdev.absmax[ABS_X] = ret - 1; + aiptek->inputdev->absmin[ABS_X] = 0; + aiptek->inputdev->absmax[ABS_X] = ret - 1; /* Query getYextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) return ret; - aiptek->inputdev.absmin[ABS_Y] = 0; - aiptek->inputdev.absmax[ABS_Y] = ret - 1; + aiptek->inputdev->absmin[ABS_Y] = 0; + aiptek->inputdev->absmax[ABS_Y] = ret - 1; /* Query getPressureLevels */ if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) return ret; - aiptek->inputdev.absmin[ABS_PRESSURE] = 0; - aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1; + aiptek->inputdev->absmin[ABS_PRESSURE] = 0; + aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1; /* Depending on whether we are in absolute or relative mode, we will * do a switchToTablet(absolute) or switchToMouse(relative) command. @@ -1025,8 +1025,8 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr return 0; return snprintf(buf, PAGE_SIZE, "%dx%d\n", - aiptek->inputdev.absmax[ABS_X] + 1, - aiptek->inputdev.absmax[ABS_Y] + 1); + aiptek->inputdev->absmax[ABS_X] + 1, + aiptek->inputdev->absmax[ABS_Y] + 1); } /* These structs define the sysfs files, param #1 is the name of the @@ -1048,7 +1048,7 @@ static ssize_t show_tabletProductId(struct device *dev, struct device_attribute return 0; return snprintf(buf, PAGE_SIZE, "0x%04x\n", - aiptek->inputdev.id.product); + aiptek->inputdev->id.product); } static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); @@ -1063,7 +1063,7 @@ static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute * if (aiptek == NULL) return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor); + return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); } static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); @@ -1977,7 +1977,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) struct input_dev *inputdev; struct input_handle *inputhandle; struct list_head *node, *next; - char path[64 + 1]; int i; int speeds[] = { 0, AIPTEK_PROGRAMMABLE_DELAY_50, @@ -1996,24 +1995,26 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) */ speeds[0] = programmableDelay; - if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL) - return -ENOMEM; - memset(aiptek, 0, sizeof(struct aiptek)); + aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); + inputdev = input_allocate_device(); + if (!aiptek || !inputdev) + goto fail1; aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, SLAB_ATOMIC, &aiptek->data_dma); - if (aiptek->data == NULL) { - kfree(aiptek); - return -ENOMEM; - } + if (!aiptek->data) + goto fail1; aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); - if (aiptek->urb == NULL) { - usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, - aiptek->data_dma); - kfree(aiptek); - return -ENOMEM; - } + if (!aiptek->urb) + goto fail2; + + aiptek->inputdev = inputdev; + aiptek->usbdev = usbdev; + aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; + aiptek->inDelay = 0; + aiptek->endDelay = 0; + aiptek->previousJitterable = 0; /* Set up the curSettings struct. Said struct contains the current * programmable parameters. The newSetting struct contains changes @@ -2036,31 +2037,48 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Both structs should have equivalent settings */ - memcpy(&aiptek->newSetting, &aiptek->curSetting, - sizeof(struct aiptek_settings)); + aiptek->newSetting = aiptek->curSetting; + + /* Determine the usb devices' physical path. + * Asketh not why we always pretend we're using "../input0", + * but I suspect this will have to be refactored one + * day if a single USB device can be a keyboard & a mouse + * & a tablet, and the inputX number actually will tell + * us something... + */ + usb_make_path(usbdev, aiptek->features.usbPath, + sizeof(aiptek->features.usbPath)); + strlcat(aiptek->features.usbPath, "/input0", + sizeof(aiptek->features.usbPath)); + + /* Set up client data, pointers to open and close routines + * for the input device. + */ + inputdev->name = "Aiptek"; + inputdev->phys = aiptek->features.usbPath; + usb_to_input_id(usbdev, &inputdev->id); + inputdev->cdev.dev = &intf->dev; + inputdev->private = aiptek; + inputdev->open = aiptek_open; + inputdev->close = aiptek_close; /* Now program the capacities of the tablet, in terms of being * an input device. */ - aiptek->inputdev.evbit[0] |= BIT(EV_KEY) + inputdev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL) | BIT(EV_MSC); - aiptek->inputdev.absbit[0] |= - (BIT(ABS_X) | - BIT(ABS_Y) | - BIT(ABS_PRESSURE) | - BIT(ABS_TILT_X) | - BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC)); + inputdev->absbit[0] |= BIT(ABS_MISC); - aiptek->inputdev.relbit[0] |= + inputdev->relbit[0] |= (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); - aiptek->inputdev.keybit[LONG(BTN_LEFT)] |= + inputdev->keybit[LONG(BTN_LEFT)] |= (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); - aiptek->inputdev.keybit[LONG(BTN_DIGI)] |= + inputdev->keybit[LONG(BTN_DIGI)] |= (BIT(BTN_TOOL_PEN) | BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_PENCIL) | @@ -2070,70 +2088,26 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) BIT(BTN_TOOL_LENS) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); - aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL); + inputdev->mscbit[0] = BIT(MSC_SERIAL); /* Programming the tablet macro keys needs to be done with a for loop * as the keycodes are discontiguous. */ for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) - set_bit(macroKeyEvents[i], aiptek->inputdev.keybit); - - /* Set up client data, pointers to open and close routines - * for the input device. - */ - aiptek->inputdev.private = aiptek; - aiptek->inputdev.open = aiptek_open; - aiptek->inputdev.close = aiptek_close; - - /* Determine the usb devices' physical path. - * Asketh not why we always pretend we're using "../input0", - * but I suspect this will have to be refactored one - * day if a single USB device can be a keyboard & a mouse - * & a tablet, and the inputX number actually will tell - * us something... - */ - if (usb_make_path(usbdev, path, 64) > 0) - sprintf(aiptek->features.usbPath, "%s/input0", path); + set_bit(macroKeyEvents[i], inputdev->keybit); - /* Program the input device coordinate capacities. We do not yet + /* + * Program the input device coordinate capacities. We do not yet * know what maximum X, Y, and Z values are, so we're putting fake * values in. Later, we'll ask the tablet to put in the correct * values. */ - aiptek->inputdev.absmin[ABS_X] = 0; - aiptek->inputdev.absmax[ABS_X] = 2999; - aiptek->inputdev.absmin[ABS_Y] = 0; - aiptek->inputdev.absmax[ABS_Y] = 2249; - aiptek->inputdev.absmin[ABS_PRESSURE] = 0; - aiptek->inputdev.absmax[ABS_PRESSURE] = 511; - aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN; - aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX; - aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN; - aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX; - aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN; - aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1; - aiptek->inputdev.absfuzz[ABS_X] = 0; - aiptek->inputdev.absfuzz[ABS_Y] = 0; - aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0; - aiptek->inputdev.absfuzz[ABS_TILT_X] = 0; - aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0; - aiptek->inputdev.absfuzz[ABS_WHEEL] = 0; - aiptek->inputdev.absflat[ABS_X] = 0; - aiptek->inputdev.absflat[ABS_Y] = 0; - aiptek->inputdev.absflat[ABS_PRESSURE] = 0; - aiptek->inputdev.absflat[ABS_TILT_X] = 0; - aiptek->inputdev.absflat[ABS_TILT_Y] = 0; - aiptek->inputdev.absflat[ABS_WHEEL] = 0; - aiptek->inputdev.name = "Aiptek"; - aiptek->inputdev.phys = aiptek->features.usbPath; - usb_to_input_id(usbdev, &aiptek->inputdev.id); - aiptek->inputdev.dev = &intf->dev; - - aiptek->usbdev = usbdev; - aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; - aiptek->inDelay = 0; - aiptek->endDelay = 0; - aiptek->previousJitterable = 0; + input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); + input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); endpoint = &intf->altsetting[0].endpoint[0].desc; @@ -2150,28 +2124,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek->urb->transfer_dma = aiptek->data_dma; aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* Register the tablet as an Input Device - */ - input_register_device(&aiptek->inputdev); - - /* We now will look for the evdev device which is mapped to - * the tablet. The partial name is kept in the link list of - * input_handles associated with this input device. - * What identifies an evdev input_handler is that it begins - * with 'event', continues with a digit, and that in turn - * is mapped to /{devfs}/input/eventN. - */ - inputdev = &aiptek->inputdev; - list_for_each_safe(node, next, &inputdev->h_list) { - inputhandle = to_handle(node); - if (strncmp(inputhandle->name, "event", 5) == 0) { - strcpy(aiptek->features.inputPath, inputhandle->name); - break; - } - } - - info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath); - /* Program the tablet. This sets the tablet up in the mode * specified in newSetting, and also queries the tablet's * physical capacities. @@ -2186,13 +2138,32 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); - if (aiptek->inputdev.absmax[ABS_X] > 0) { + if (aiptek->inputdev->absmax[ABS_X] > 0) { info("input: Aiptek using %d ms programming speed\n", aiptek->curSetting.programmableDelay); break; } } + /* Register the tablet as an Input Device + */ + input_register_device(aiptek->inputdev); + + /* We now will look for the evdev device which is mapped to + * the tablet. The partial name is kept in the link list of + * input_handles associated with this input device. + * What identifies an evdev input_handler is that it begins + * with 'event', continues with a digit, and that in turn + * is mapped to /{devfs}/input/eventN. + */ + list_for_each_safe(node, next, &inputdev->h_list) { + inputhandle = to_handle(node); + if (strncmp(inputhandle->name, "event", 5) == 0) { + strcpy(aiptek->features.inputPath, inputhandle->name); + break; + } + } + /* Associate this driver's struct with the usb interface. */ usb_set_intfdata(intf, aiptek); @@ -2207,6 +2178,12 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) info("aiptek: error loading 'evdev' module"); return 0; + +fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, + aiptek->data_dma); +fail1: input_free_device(inputdev); + kfree(aiptek); + return -ENOMEM; } /* Forward declaration */ @@ -2234,7 +2211,7 @@ static void aiptek_disconnect(struct usb_interface *intf) /* Free & unhook everything from the system. */ usb_kill_urb(aiptek->urb); - input_unregister_device(&aiptek->inputdev); + input_unregister_device(aiptek->inputdev); aiptek_delete_files(&intf->dev); usb_free_urb(aiptek->urb); usb_buffer_free(interface_to_usbdev(intf), diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index e03c1c567a14..15840db092a5 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -39,7 +39,7 @@ #define APPLE_VENDOR_ID 0x05AC #define ATP_DEVICE(prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ .idVendor = APPLE_VENDOR_ID, \ @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, atp_table); * We try to keep the touchpad aspect ratio while still doing only simple * arithmetics. * The factors below give coordinates like: - * 0 <= x < 960 on 12" and 15" Powerbooks - * 0 <= x < 1600 on 17" Powerbooks - * 0 <= y < 646 + * 0 <= x < 960 on 12" and 15" Powerbooks + * 0 <= x < 1600 on 17" Powerbooks + * 0 <= y < 646 */ #define ATP_XFACT 64 #define ATP_YFACT 43 @@ -93,11 +93,12 @@ MODULE_DEVICE_TABLE (usb, atp_table); /* Structure to hold all of our device specific stuff */ struct atp { + char phys[64]; struct usb_device * udev; /* usb device */ struct urb * urb; /* usb request block */ signed char * data; /* transferred data */ int open; /* non-zero if opened */ - struct input_dev input; /* input dev */ + struct input_dev *input; /* input dev */ int valid; /* are the sensors valid ? */ int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ @@ -114,11 +115,11 @@ struct atp { int i; \ printk("appletouch: %s %lld", msg, (long long)jiffies); \ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ - printk(" %02x", tab[i]); \ - printk("\n"); \ + printk(" %02x", tab[i]); \ + printk("\n"); \ } -#define dprintk(format, a...) \ +#define dprintk(format, a...) \ do { \ if (debug) printk(format, ##a); \ } while (0) @@ -219,8 +220,8 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) for (i = 16; i < ATP_XSENSORS; i++) if (dev->xy_cur[i]) { printk("appletouch: 17\" model detected.\n"); - input_set_abs_params(&dev->input, ABS_X, 0, - (ATP_XSENSORS - 1) * + input_set_abs_params(dev->input, ABS_X, 0, + (ATP_XSENSORS - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); break; @@ -260,12 +261,12 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) "Xz: %3d Yz: %3d\n", x, y, x_z, y_z); - input_report_key(&dev->input, BTN_TOUCH, 1); - input_report_abs(&dev->input, ABS_X, x); - input_report_abs(&dev->input, ABS_Y, y); - input_report_abs(&dev->input, ABS_PRESSURE, + input_report_key(dev->input, BTN_TOUCH, 1); + input_report_abs(dev->input, ABS_X, x); + input_report_abs(dev->input, ABS_Y, y); + input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(&dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, max(x_f, y_f)); } dev->x_old = x; dev->y_old = y; @@ -273,17 +274,17 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) else if (!x && !y) { dev->x_old = dev->y_old = -1; - input_report_key(&dev->input, BTN_TOUCH, 0); - input_report_abs(&dev->input, ABS_PRESSURE, 0); - atp_report_fingers(&dev->input, 0); + input_report_key(dev->input, BTN_TOUCH, 0); + input_report_abs(dev->input, ABS_PRESSURE, 0); + atp_report_fingers(dev->input, 0); /* reset the accumulator on release */ memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } - input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]); + input_report_key(dev->input, BTN_LEFT, !!dev->data[80]); - input_sync(&dev->input); + input_sync(dev->input); exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); @@ -314,21 +315,14 @@ static void atp_close(struct input_dev *input) static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { - struct atp *dev = NULL; + struct atp *dev; + struct input_dev *input_dev; + struct usb_device *udev = interface_to_usbdev(iface); struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int int_in_endpointAddr = 0; int i, retval = -ENOMEM; - /* allocate memory for our device state and initialize it */ - dev = kmalloc(sizeof(struct atp), GFP_KERNEL); - if (dev == NULL) { - err("Out of memory"); - goto err_kmalloc; - } - memset(dev, 0, sizeof(struct atp)); - - dev->udev = interface_to_usbdev(iface); /* set up the endpoint information */ /* use only the first interrupt-in endpoint */ @@ -345,70 +339,82 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id } } if (!int_in_endpointAddr) { - retval = -EIO; err("Could not find int-in endpoint"); - goto err_endpoint; + return -EIO; } - /* save our data pointer in this interface device */ - usb_set_intfdata(iface, dev); + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(struct atp), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!dev || !input_dev) { + err("Out of memory"); + goto err_free_devs; + } + + dev->udev = udev; + dev->input = input_dev; dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) { retval = -ENOMEM; - goto err_usballoc; + goto err_free_devs; } + dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL, &dev->urb->transfer_dma); if (!dev->data) { retval = -ENOMEM; - goto err_usbbufalloc; + goto err_free_urb; } - usb_fill_int_urb(dev->urb, dev->udev, - usb_rcvintpipe(dev->udev, int_in_endpointAddr), + + usb_fill_int_urb(dev->urb, udev, + usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, ATP_DATASIZE, atp_complete, dev, 1); - init_input_dev(&dev->input); - dev->input.name = "appletouch"; - dev->input.dev = &iface->dev; - dev->input.private = dev; - dev->input.open = atp_open; - dev->input.close = atp_close; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); + strlcat(dev->phys, "/input0", sizeof(dev->phys)); + + input_dev->name = "appletouch"; + input_dev->phys = dev->phys; + usb_to_input_id(dev->udev, &input_dev->id); + input_dev->cdev.dev = &iface->dev; - usb_to_input_id(dev->udev, &dev->input.id); + input_dev->private = dev; + input_dev->open = atp_open; + input_dev->close = atp_close; - set_bit(EV_ABS, dev->input.evbit); + set_bit(EV_ABS, input_dev->evbit); /* * 12" and 15" Powerbooks only have 16 x sensors, * 17" models are detected later. */ - input_set_abs_params(&dev->input, ABS_X, 0, + input_set_abs_params(input_dev, ABS_X, 0, (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(&dev->input, ABS_Y, 0, + input_set_abs_params(input_dev, ABS_Y, 0, (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); - set_bit(EV_KEY, dev->input.evbit); - set_bit(BTN_TOUCH, dev->input.keybit); - set_bit(BTN_TOOL_FINGER, dev->input.keybit); - set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit); - set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit); - set_bit(BTN_LEFT, dev->input.keybit); + set_bit(EV_KEY, input_dev->evbit); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_TOOL_FINGER, input_dev->keybit); + set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + set_bit(BTN_LEFT, input_dev->keybit); - input_register_device(&dev->input); + input_register_device(dev->input); - printk(KERN_INFO "input: appletouch connected\n"); + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); return 0; -err_usbbufalloc: + err_free_urb: usb_free_urb(dev->urb); -err_usballoc: + err_free_devs: usb_set_intfdata(iface, NULL); -err_endpoint: kfree(dev); -err_kmalloc: + input_free_device(input_dev); return retval; } @@ -419,7 +425,7 @@ static void atp_disconnect(struct usb_interface *iface) usb_set_intfdata(iface, NULL); if (dev) { usb_kill_urb(dev->urb); - input_unregister_device(&dev->input); + input_unregister_device(dev->input); usb_free_urb(dev->urb); usb_buffer_free(dev->udev, ATP_DATASIZE, dev->data, dev->urb->transfer_dma); diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index fd99681ee483..9a2a47db9494 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -112,7 +112,6 @@ #define NAME_BUFSIZE 80 /* size of product name, path buffers */ #define DATA_BUFSIZE 63 /* size of URB data buffers */ -#define ATI_INPUTNUM 1 /* Which input device to register as */ static unsigned long channel_mask; module_param(channel_mask, ulong, 0444); @@ -162,7 +161,7 @@ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; static DECLARE_MUTEX(disconnect_sem); struct ati_remote { - struct input_dev idev; + struct input_dev *idev; struct usb_device *udev; struct usb_interface *interface; @@ -198,15 +197,13 @@ struct ati_remote { #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ /* Translation table from hardware messages to input events. */ -static struct -{ +static struct { short kind; unsigned char data1, data2; int type; unsigned int code; int value; -} ati_remote_tbl[] = -{ +} ati_remote_tbl[] = { /* Directional control pad axes */ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ @@ -286,7 +283,6 @@ static struct /* Local function prototypes */ static void ati_remote_dump (unsigned char *data, unsigned int actual_length); -static void ati_remote_delete (struct ati_remote *dev); static int ati_remote_open (struct input_dev *inputdev); static void ati_remote_close (struct input_dev *inputdev); static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); @@ -428,7 +424,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) { struct ati_remote *ati_remote = urb->context; unsigned char *data= ati_remote->inbuf; - struct input_dev *dev = &ati_remote->idev; + struct input_dev *dev = ati_remote->idev; int index, acc; int remote_num; @@ -587,38 +583,55 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs) } /* - * ati_remote_delete + * ati_remote_alloc_buffers */ -static void ati_remote_delete(struct ati_remote *ati_remote) +static int ati_remote_alloc_buffers(struct usb_device *udev, + struct ati_remote *ati_remote) { - if (ati_remote->irq_urb) - usb_kill_urb(ati_remote->irq_urb); + ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, + &ati_remote->inbuf_dma); + if (!ati_remote->inbuf) + return -1; - if (ati_remote->out_urb) - usb_kill_urb(ati_remote->out_urb); + ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, + &ati_remote->outbuf_dma); + if (!ati_remote->outbuf) + return -1; - input_unregister_device(&ati_remote->idev); + ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->irq_urb) + return -1; - if (ati_remote->inbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->inbuf_dma); + ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->out_urb) + return -1; - if (ati_remote->outbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->outbuf, ati_remote->outbuf_dma); + return 0; +} +/* + * ati_remote_free_buffers + */ +static void ati_remote_free_buffers(struct ati_remote *ati_remote) +{ if (ati_remote->irq_urb) usb_free_urb(ati_remote->irq_urb); if (ati_remote->out_urb) usb_free_urb(ati_remote->out_urb); - kfree(ati_remote); + if (ati_remote->inbuf) + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->inbuf_dma); + + if (ati_remote->outbuf) + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->outbuf_dma); } static void ati_remote_input_init(struct ati_remote *ati_remote) { - struct input_dev *idev = &(ati_remote->idev); + struct input_dev *idev = ati_remote->idev; int i; idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); @@ -637,7 +650,7 @@ static void ati_remote_input_init(struct ati_remote *ati_remote) idev->phys = ati_remote->phys; usb_to_input_id(ati_remote->udev, &idev->id); - idev->dev = &ati_remote->udev->dev; + idev->cdev.dev = &ati_remote->udev->dev; } static int ati_remote_initialize(struct ati_remote *ati_remote) @@ -674,7 +687,7 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { dev_err(&ati_remote->interface->dev, "Initializing ati_remote hardware failed.\n"); - return 1; + return -EIO; } return 0; @@ -686,95 +699,83 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); - struct ati_remote *ati_remote = NULL; - struct usb_host_interface *iface_host; - int retval = -ENOMEM; - char path[64]; - - /* Allocate and clear an ati_remote struct */ - if (!(ati_remote = kmalloc(sizeof (struct ati_remote), GFP_KERNEL))) - return -ENOMEM; - memset(ati_remote, 0x00, sizeof (struct ati_remote)); + struct usb_host_interface *iface_host = interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; + struct ati_remote *ati_remote; + struct input_dev *input_dev; + int err = -ENOMEM; - iface_host = interface->cur_altsetting; if (iface_host->desc.bNumEndpoints != 2) { err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - ati_remote->endpoint_in = &(iface_host->endpoint[0].desc); - ati_remote->endpoint_out = &(iface_host->endpoint[1].desc); - ati_remote->udev = udev; - ati_remote->interface = interface; + endpoint_in = &iface_host->endpoint[0].desc; + endpoint_out = &iface_host->endpoint[1].desc; - if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) { + if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) { err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) { + if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - if (le16_to_cpu(ati_remote->endpoint_in->wMaxPacketSize) == 0) { + if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { err("%s: endpoint_in message size==0? \n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - /* Allocate URB buffers, URBs */ - ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, - &ati_remote->inbuf_dma); - if (!ati_remote->inbuf) - goto error; + ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ati_remote || !input_dev) + goto fail1; - ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, - &ati_remote->outbuf_dma); - if (!ati_remote->outbuf) - goto error; + /* Allocate URB buffers, URBs */ + if (ati_remote_alloc_buffers(udev, ati_remote)) + goto fail2; - ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->irq_urb) - goto error; + ati_remote->endpoint_in = endpoint_in; + ati_remote->endpoint_out = endpoint_out; + ati_remote->udev = udev; + ati_remote->idev = input_dev; + ati_remote->interface = interface; - ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->out_urb) - goto error; + usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); + strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); - usb_make_path(udev, path, NAME_BUFSIZE); - sprintf(ati_remote->phys, "%s/input%d", path, ATI_INPUTNUM); if (udev->manufacturer) - strcat(ati_remote->name, udev->manufacturer); + strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); if (udev->product) - sprintf(ati_remote->name, "%s %s", ati_remote->name, udev->product); + snprintf(ati_remote->name, sizeof(ati_remote->name), + "%s %s", ati_remote->name, udev->product); if (!strlen(ati_remote->name)) - sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)", + snprintf(ati_remote->name, sizeof(ati_remote->name), + DRIVER_DESC "(%04x,%04x)", le16_to_cpu(ati_remote->udev->descriptor.idVendor), le16_to_cpu(ati_remote->udev->descriptor.idProduct)); + ati_remote_input_init(ati_remote); + /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ - retval = ati_remote_initialize(ati_remote); - if (retval) - goto error; + err = ati_remote_initialize(ati_remote); + if (err) + goto fail3; /* Set up and register input device */ - ati_remote_input_init(ati_remote); - input_register_device(&ati_remote->idev); - - dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n", - ati_remote->name, path); + input_register_device(ati_remote->idev); usb_set_intfdata(interface, ati_remote); + return 0; -error: - if (retval) - ati_remote_delete(ati_remote); - - return retval; +fail3: usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); +fail2: ati_remote_free_buffers(ati_remote); +fail1: input_free_device(input_dev); + kfree(ati_remote); + return err; } /* @@ -791,7 +792,11 @@ static void ati_remote_disconnect(struct usb_interface *interface) return; } - ati_remote_delete(ati_remote); + usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + input_unregister_device(ati_remote->idev); + ati_remote_free_buffers(ati_remote); + kfree(ati_remote); } /* diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 41f92b924761..411a0645a7a3 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1619,8 +1619,8 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) struct hid_descriptor *hdesc; struct hid_device *hid; unsigned quirks = 0, rsize = 0; - char *buf, *rdesc; - int n, insize = 0; + char *rdesc; + int n, len, insize = 0; for (n = 0; hid_blacklist[n].idVendor; n++) if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) && @@ -1630,10 +1630,11 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (quirks & HID_QUIRK_IGNORE) return NULL; - if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && ((!interface->desc.bNumEndpoints) || - usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { - dbg("class descriptor not present\n"); - return NULL; + if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && + (!interface->desc.bNumEndpoints || + usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { + dbg("class descriptor not present\n"); + return NULL; } for (n = 0; n < hdesc->bNumDescriptors; n++) @@ -1749,32 +1750,34 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) hid->name[0] = 0; - if (!(buf = kmalloc(64, GFP_KERNEL))) - goto fail; + if (dev->manufacturer) + strlcpy(hid->name, dev->manufacturer, sizeof(hid->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(hid->name, " ", sizeof(hid->name)); + strlcat(hid->name, dev->product, sizeof(hid->name)); + } + + if (!strlen(hid->name)) + snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); - if (dev->manufacturer) { - strcat(hid->name, dev->manufacturer); - if (dev->product) - snprintf(hid->name, 64, "%s %s", hid->name, dev->product); - } else if (dev->product) { - snprintf(hid->name, 128, "%s", dev->product); - } else - snprintf(hid->name, 128, "%04x:%04x", - le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - - usb_make_path(dev, buf, 64); - snprintf(hid->phys, 64, "%s/input%d", buf, - intf->altsetting[0].desc.bInterfaceNumber); + usb_make_path(dev, hid->phys, sizeof(hid->phys)); + strlcat(hid->phys, "/input", sizeof(hid->phys)); + len = strlen(hid->phys); + if (len < sizeof(hid->phys) - 1) + snprintf(hid->phys + len, sizeof(hid->phys) - len, + "%d", intf->altsetting[0].desc.bInterfaceNumber); if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) hid->uniq[0] = 0; - kfree(buf); - hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); if (!hid->urbctrl) goto fail; + usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr, hid->ctrlbuf, 1, hid_ctrl, hid); hid->urbctrl->setup_dma = hid->cr_dma; diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c index 0b6452248a39..9ff25eb520a6 100644 --- a/drivers/usb/input/hid-input.c +++ b/drivers/usb/input/hid-input.c @@ -76,8 +76,8 @@ static struct { static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage) { - struct input_dev *input = &hidinput->input; - struct hid_device *device = hidinput->input.private; + struct input_dev *input = hidinput->input; + struct hid_device *device = input->private; int max = 0, code; unsigned long *bit = NULL; @@ -461,7 +461,8 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct if (!field->hidinput) return; - input = &field->hidinput->input; + + input = field->hidinput->input; input_regs(input, regs); @@ -533,13 +534,10 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { - struct list_head *lh; struct hid_input *hidinput; - list_for_each (lh, &hid->inputs) { - hidinput = list_entry(lh, struct hid_input, list); - input_sync(&hidinput->input); - } + list_for_each_entry(hidinput, &hid->inputs, list) + input_sync(hidinput->input); } static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field) @@ -604,6 +602,7 @@ int hidinput_connect(struct hid_device *hid) struct usb_device *dev = hid->dev; struct hid_report *report; struct hid_input *hidinput = NULL; + struct input_dev *input_dev; int i, j, k; INIT_LIST_HEAD(&hid->inputs); @@ -624,25 +623,28 @@ int hidinput_connect(struct hid_device *hid) continue; if (!hidinput) { - hidinput = kmalloc(sizeof(*hidinput), GFP_KERNEL); - if (!hidinput) { + hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hidinput || !input_dev) { + kfree(hidinput); + input_free_device(input_dev); err("Out of memory during hid input probe"); return -1; } - memset(hidinput, 0, sizeof(*hidinput)); - list_add_tail(&hidinput->list, &hid->inputs); + input_dev->private = hid; + input_dev->event = hidinput_input_event; + input_dev->open = hidinput_open; + input_dev->close = hidinput_close; - hidinput->input.private = hid; - hidinput->input.event = hidinput_input_event; - hidinput->input.open = hidinput_open; - hidinput->input.close = hidinput_close; + input_dev->name = hid->name; + input_dev->phys = hid->phys; + input_dev->uniq = hid->uniq; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &hid->intf->dev; - hidinput->input.name = hid->name; - hidinput->input.phys = hid->phys; - hidinput->input.uniq = hid->uniq; - usb_to_input_id(dev, &hidinput->input.id); - hidinput->input.dev = &hid->intf->dev; + hidinput->input = input_dev; + list_add_tail(&hidinput->list, &hid->inputs); } for (i = 0; i < report->maxfield; i++) @@ -657,7 +659,7 @@ int hidinput_connect(struct hid_device *hid) * UGCI) cram a lot of unrelated inputs into the * same interface. */ hidinput->report = report; - input_register_device(&hidinput->input); + input_register_device(hidinput->input); hidinput = NULL; } } @@ -667,7 +669,7 @@ int hidinput_connect(struct hid_device *hid) * only useful in this case, and not for multi-input quirks. */ if (hidinput) { hid_ff_init(hid); - input_register_device(&hidinput->input); + input_register_device(hidinput->input); } return 0; @@ -675,13 +677,11 @@ int hidinput_connect(struct hid_device *hid) void hidinput_disconnect(struct hid_device *hid) { - struct list_head *lh, *next; - struct hid_input *hidinput; + struct hid_input *hidinput, *next; - list_for_each_safe(lh, next, &hid->inputs) { - hidinput = list_entry(lh, struct hid_input, list); - input_unregister_device(&hidinput->input); + list_for_each_entry_safe(hidinput, next, &hid->inputs, list) { list_del(&hidinput->list); + input_unregister_device(hidinput->input); kfree(hidinput); } } diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c index 0c4c77aa31ea..f82c9c9e5d51 100644 --- a/drivers/usb/input/hid-lgff.c +++ b/drivers/usb/input/hid-lgff.c @@ -255,22 +255,19 @@ static void hid_lgff_input_init(struct hid_device* hid) u16 idVendor = le16_to_cpu(hid->dev->descriptor.idVendor); u16 idProduct = le16_to_cpu(hid->dev->descriptor.idProduct); struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; while (dev->idVendor && (idVendor != dev->idVendor || idProduct != dev->idProduct)) dev++; - ff = dev->ff; + for (ff = dev->ff; *ff >= 0; ff++) + set_bit(*ff, input_dev->ffbit); - while (*ff >= 0) { - set_bit(*ff, hidinput->input.ffbit); - ++ff; - } - - hidinput->input.upload_effect = hid_lgff_upload_effect; - hidinput->input.flush = hid_lgff_flush; + input_dev->upload_effect = hid_lgff_upload_effect; + input_dev->flush = hid_lgff_flush; - set_bit(EV_FF, hidinput->input.evbit); - hidinput->input.ff_effects_max = LGFF_EFFECTS; + set_bit(EV_FF, input_dev->evbit); + input_dev->ff_effects_max = LGFF_EFFECTS; } static void hid_lgff_exit(struct hid_device* hid) diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c index 8f6a0a6f94a9..023fd5ac31c8 100644 --- a/drivers/usb/input/hid-tmff.c +++ b/drivers/usb/input/hid-tmff.c @@ -111,6 +111,7 @@ int hid_tmff_init(struct hid_device *hid) struct tmff_device *private; struct list_head *pos; struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL); if (!private) @@ -155,7 +156,7 @@ int hid_tmff_init(struct hid_device *hid) private->report = report; private->rumble = field; - set_bit(FF_RUMBLE, hidinput->input.ffbit); + set_bit(FF_RUMBLE, input_dev->ffbit); break; default: @@ -164,11 +165,11 @@ int hid_tmff_init(struct hid_device *hid) } /* Fallthrough to here only when a valid usage is found */ - hidinput->input.upload_effect = hid_tmff_upload_effect; - hidinput->input.flush = hid_tmff_flush; + input_dev->upload_effect = hid_tmff_upload_effect; + input_dev->flush = hid_tmff_flush; - set_bit(EV_FF, hidinput->input.evbit); - hidinput->input.ff_effects_max = TMFF_EFFECTS; + set_bit(EV_FF, input_dev->evbit); + input_dev->ff_effects_max = TMFF_EFFECTS; } } diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index ec2412c42f1e..ee48a2276104 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -371,7 +371,7 @@ struct hid_control_fifo { struct hid_input { struct list_head list; struct hid_report *report; - struct input_dev input; + struct input_dev *input; }; struct hid_device { /* device report descriptor */ diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index becb87efb869..3b581853cf10 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -73,7 +73,7 @@ MODULE_LICENSE( DRIVER_LICENSE ); struct itmtouch_dev { struct usb_device *usbdev; /* usb device */ - struct input_dev inputdev; /* input device */ + struct input_dev *inputdev; /* input device */ struct urb *readurb; /* urb */ char rbuf[ITM_BUFSIZE]; /* data */ int users; @@ -88,9 +88,9 @@ static struct usb_device_id itmtouch_ids [] = { static void itmtouch_irq(struct urb *urb, struct pt_regs *regs) { - struct itmtouch_dev * itmtouch = urb->context; + struct itmtouch_dev *itmtouch = urb->context; unsigned char *data = urb->transfer_buffer; - struct input_dev *dev = &itmtouch->inputdev; + struct input_dev *dev = itmtouch->inputdev; int retval; switch (urb->status) { @@ -156,49 +156,62 @@ static void itmtouch_close(struct input_dev *input) static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct itmtouch_dev *itmtouch; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); unsigned int pipe; unsigned int maxp; - char path[PATH_SIZE]; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) { + itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!itmtouch || !input_dev) { err("%s - Out of memory.", __FUNCTION__); - return -ENOMEM; + goto fail; } itmtouch->usbdev = udev; + itmtouch->inputdev = input_dev; - itmtouch->inputdev.private = itmtouch; - itmtouch->inputdev.open = itmtouch_open; - itmtouch->inputdev.close = itmtouch_close; + if (udev->manufacturer) + strlcpy(itmtouch->name, udev->manufacturer, sizeof(itmtouch->name)); - usb_make_path(udev, path, PATH_SIZE); - - itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - itmtouch->inputdev.name = itmtouch->name; - itmtouch->inputdev.phys = itmtouch->phys; - usb_to_input_id(udev, &itmtouch->inputdev.id); - itmtouch->inputdev.dev = &intf->dev; + if (udev->product) { + if (udev->manufacturer) + strlcat(itmtouch->name, " ", sizeof(itmtouch->name)); + strlcat(itmtouch->name, udev->product, sizeof(itmtouch->name)); + } if (!strlen(itmtouch->name)) sprintf(itmtouch->name, "USB ITM touchscreen"); + usb_make_path(udev, itmtouch->phys, sizeof(itmtouch->phys)); + strlcpy(itmtouch->phys, "/input0", sizeof(itmtouch->phys)); + + input_dev->name = itmtouch->name; + input_dev->phys = itmtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = itmtouch; + + input_dev->open = itmtouch_open; + input_dev->close = itmtouch_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + /* device limits */ /* as specified by the ITM datasheet, X and Y are 12bit, * Z (pressure) is 8 bit. However, the fields are defined up * to 14 bits for future possible expansion. */ - input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0); - input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0); - input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0); + input_set_abs_params(input_dev, ABS_X, 0, 0x0FFF, 2, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x0FFF, 2, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 2, 0); /* initialise the URB so we can read from the transport stream */ pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress); @@ -208,22 +221,23 @@ static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id maxp = ITM_BUFSIZE; itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL); - if (!itmtouch->readurb) { dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__); - kfree(itmtouch); - return -ENOMEM; + goto fail; } usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf, maxp, itmtouch_irq, itmtouch, endpoint->bInterval); - input_register_device(&itmtouch->inputdev); + input_register_device(itmtouch->inputdev); - printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path); usb_set_intfdata(intf, itmtouch); return 0; + + fail: input_free_device(input_dev); + kfree(itmtouch); + return -ENOMEM; } static void itmtouch_disconnect(struct usb_interface *intf) @@ -233,7 +247,7 @@ static void itmtouch_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (itmtouch) { - input_unregister_device(&itmtouch->inputdev); + input_unregister_device(itmtouch->inputdev); usb_kill_urb(itmtouch->readurb); usb_free_urb(itmtouch->readurb); kfree(itmtouch); diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index b6f6ac8d9c2f..a248664b5d1d 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -34,7 +34,7 @@ MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); struct kbtab { signed char *data; dma_addr_t data_dma; - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; struct urb *irq; int x, y; @@ -48,7 +48,7 @@ static void kbtab_irq(struct urb *urb, struct pt_regs *regs) { struct kbtab *kbtab = urb->context; unsigned char *data = kbtab->data; - struct input_dev *dev = &kbtab->dev; + struct input_dev *dev = kbtab->dev; int retval; switch (urb->status) { @@ -124,53 +124,43 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; struct kbtab *kbtab; - char path[64]; + struct input_dev *input_dev; - if (!(kbtab = kmalloc(sizeof(struct kbtab), GFP_KERNEL))) - return -ENOMEM; - memset(kbtab, 0, sizeof(struct kbtab)); + kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbtab || !input_dev) + goto fail1; kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma); - if (!kbtab->data) { - kfree(kbtab); - return -ENOMEM; - } + if (!kbtab->data) + goto fail1; kbtab->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!kbtab->irq) { - usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); - kfree(kbtab); - return -ENOMEM; - } - - kbtab->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); - kbtab->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - - kbtab->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - - kbtab->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + if (!kbtab->irq) + goto fail2; - kbtab->dev.mscbit[0] |= BIT(MSC_SERIAL); - - kbtab->dev.absmax[ABS_X] = 0x2000; - kbtab->dev.absmax[ABS_Y] = 0x1750; - kbtab->dev.absmax[ABS_PRESSURE] = 0xff; + kbtab->usbdev = dev; + kbtab->dev = input_dev; - kbtab->dev.absfuzz[ABS_X] = 4; - kbtab->dev.absfuzz[ABS_Y] = 4; + usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys)); + strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys)); - kbtab->dev.private = kbtab; - kbtab->dev.open = kbtab_open; - kbtab->dev.close = kbtab_close; + input_dev->name = "KB Gear Tablet"; + input_dev->phys = kbtab->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = kbtab; - usb_make_path(dev, path, 64); - sprintf(kbtab->phys, "%s/input0", path); + input_dev->open = kbtab_open; + input_dev->close = kbtab_close; - kbtab->dev.name = "KB Gear Tablet"; - kbtab->dev.phys = kbtab->phys; - usb_to_input_id(dev, &kbtab->dev.id); - kbtab->dev.dev = &intf->dev; - kbtab->usbdev = dev; + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0); + input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); endpoint = &intf->cur_altsetting->endpoint[0].desc; @@ -181,23 +171,25 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i kbtab->irq->transfer_dma = kbtab->data_dma; kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&kbtab->dev); - - printk(KERN_INFO "input: KB Gear Tablet on %s\n", path); + input_register_device(kbtab->dev); usb_set_intfdata(intf, kbtab); - return 0; + +fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); +fail1: input_free_device(input_dev); + kfree(kbtab); + return -ENOMEM; } static void kbtab_disconnect(struct usb_interface *intf) { - struct kbtab *kbtab = usb_get_intfdata (intf); + struct kbtab *kbtab = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); if (kbtab) { usb_kill_urb(kbtab->irq); - input_unregister_device(&kbtab->dev); + input_unregister_device(kbtab->dev); usb_free_urb(kbtab->irq); usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma); kfree(kbtab); diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index 99de1b33c07d..5b8d65f62abf 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -20,6 +20,7 @@ #include #include #include +#include #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "Michael Downey " @@ -75,7 +76,7 @@ struct usb_keyspan { char name[128]; char phys[64]; struct usb_device* udev; - struct input_dev input; + struct input_dev *input; struct usb_interface* interface; struct usb_endpoint_descriptor* in_endpoint; struct urb* irq_urb; @@ -136,12 +137,11 @@ static struct usb_driver keyspan_driver; */ static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ { - char codes[4*RECV_SIZE]; + char codes[4 * RECV_SIZE]; int i; - for (i = 0; i < RECV_SIZE; i++) { - snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]); - } + for (i = 0; i < RECV_SIZE; i++) + snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]); dev_info(&dev->udev->dev, "%s\n", codes); } @@ -153,7 +153,7 @@ static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) { if (dev->data.bits_left >= bits_needed) - return(0); + return 0; /* * Somehow we've missed the last message. The message will be repeated @@ -162,7 +162,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) if (dev->data.pos >= dev->data.len) { dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n", __FUNCTION__, dev->data.pos, dev->data.len); - return(-1); + return -1; } /* Load as much as we can into the tester. */ @@ -172,7 +172,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) dev->data.bits_left += 8; } - return(0); + return 0; } /* @@ -311,10 +311,10 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs) __FUNCTION__, message.system, message.button, message.toggle); if (message.toggle != remote->toggle) { - input_regs(&remote->input, regs); - input_report_key(&remote->input, keyspan_key_table[message.button], 1); - input_report_key(&remote->input, keyspan_key_table[message.button], 0); - input_sync(&remote->input); + input_regs(remote->input, regs); + input_report_key(remote->input, keyspan_key_table[message.button], 1); + input_report_key(remote->input, keyspan_key_table[message.button], 0); + input_sync(remote->input); remote->toggle = message.toggle; } @@ -397,14 +397,9 @@ static int keyspan_open(struct input_dev *dev) { struct usb_keyspan *remote = dev->private; - if (remote->open++) - return 0; - remote->irq_urb->dev = remote->udev; - if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) { - remote->open--; + if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) return -EIO; - } return 0; } @@ -413,8 +408,26 @@ static void keyspan_close(struct input_dev *dev) { struct usb_keyspan *remote = dev->private; - if (!--remote->open) - usb_kill_urb(remote->irq_urb); + usb_kill_urb(remote->irq_urb); +} + +static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if ((endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; } /* @@ -422,110 +435,78 @@ static void keyspan_close(struct input_dev *dev) */ static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) { - int i; - int retval = -ENOMEM; - char path[64]; - char *buf; - struct usb_keyspan *remote = NULL; - struct usb_host_interface *iface_desc; + struct usb_device *udev = interface_to_usbdev(interface); struct usb_endpoint_descriptor *endpoint; - struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); + struct usb_keyspan *remote; + struct input_dev *input_dev; + int i, retval; - /* allocate memory for our device state and initialize it */ - remote = kmalloc(sizeof(*remote), GFP_KERNEL); - if (remote == NULL) { - err("Out of memory\n"); - goto error; + endpoint = keyspan_get_in_endpoint(interface->cur_altsetting); + if (!endpoint) + return -ENODEV; + + remote = kzalloc(sizeof(*remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!remote || !input_dev) { + retval = -ENOMEM; + goto fail1; } - memset(remote, 0x00, sizeof(*remote)); remote->udev = udev; + remote->input = input_dev; remote->interface = interface; + remote->in_endpoint = endpoint; remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ - /* set up the endpoint information */ - /* use only the first in interrupt endpoint */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!remote->in_endpoint && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - /* we found our interrupt in endpoint */ - remote->in_endpoint = endpoint; - - remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); - if (!remote->in_buffer) { - retval = -ENOMEM; - goto error; - } - } - } - - if (!remote->in_endpoint) { - err("Could not find interrupt input endpoint.\n"); - retval = -ENODEV; - goto error; + remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); + if (!remote->in_buffer) { + retval = -ENOMEM; + goto fail1; } remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); if (!remote->irq_urb) { - err("Failed to allocate urb.\n"); retval = -ENOMEM; - goto error; + goto fail2; } - retval = keyspan_setup(remote->udev); + retval = keyspan_setup(udev); if (retval) { - err("Failed to setup device.\n"); retval = -ENODEV; - goto error; - } - - /* - * Setup the input system with the bits we are going to be reporting - */ - remote->input.evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ - for (i = 0; i < 32; ++i) { - if (keyspan_key_table[i] != KEY_RESERVED) { - set_bit(keyspan_key_table[i], remote->input.keybit); - } + goto fail3; } - remote->input.private = remote; - remote->input.open = keyspan_open; - remote->input.close = keyspan_close; - - usb_make_path(remote->udev, path, 64); - sprintf(remote->phys, "%s/input0", path); + if (udev->manufacturer) + strlcpy(remote->name, udev->manufacturer, sizeof(remote->name)); - remote->input.name = remote->name; - remote->input.phys = remote->phys; - remote->input.id.bustype = BUS_USB; - remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor); - remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct); - remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice); - - if (!(buf = kmalloc(63, GFP_KERNEL))) { - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - kfree(remote); - return -ENOMEM; + if (udev->product) { + if (udev->manufacturer) + strlcat(remote->name, " ", sizeof(remote->name)); + strlcat(remote->name, udev->product, sizeof(remote->name)); } - if (remote->udev->descriptor.iManufacturer && - usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0) - strcat(remote->name, buf); + if (!strlen(remote->name)) + snprintf(remote->name, sizeof(remote->name), + "USB Keyspan Remote %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); - if (remote->udev->descriptor.iProduct && - usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0) - sprintf(remote->name, "%s %s", remote->name, buf); + usb_make_path(udev, remote->phys, sizeof(remote->phys)); + strlcat(remote->phys, "/input0", sizeof(remote->phys)); - if (!strlen(remote->name)) - sprintf(remote->name, "USB Keyspan Remote %04x:%04x", - remote->input.id.vendor, remote->input.id.product); + input_dev->name = remote->name; + input_dev->phys = remote->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &interface->dev; - kfree(buf); + input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ + for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) + if (keyspan_key_table[i] != KEY_RESERVED) + set_bit(keyspan_key_table[i], input_dev->keybit); + + input_dev->private = remote; + input_dev->open = keyspan_open; + input_dev->close = keyspan_close; /* * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() @@ -538,27 +519,17 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* we can register the device now, as it is ready */ - input_register_device(&remote->input); + input_register_device(remote->input); /* save our data pointer in this interface device */ usb_set_intfdata(interface, remote); - /* let the user know what node this device is now attached to */ - info("connected: %s on %s", remote->name, path); return 0; -error: - /* - * In case of error we need to clean up any allocated buffers - */ - if (remote->irq_urb) - usb_free_urb(remote->irq_urb); - - if (remote->in_buffer) - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - - if (remote) - kfree(remote); + fail3: usb_free_urb(remote->irq_urb); + fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + fail1: kfree(remote); + input_free_device(input_dev); return retval; } @@ -570,23 +541,16 @@ static void keyspan_disconnect(struct usb_interface *interface) { struct usb_keyspan *remote; - /* prevent keyspan_open() from racing keyspan_disconnect() */ - lock_kernel(); - remote = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ - input_unregister_device(&remote->input); + input_unregister_device(remote->input); usb_kill_urb(remote->irq_urb); usb_free_urb(remote->irq_urb); - usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma); + usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); kfree(remote); } - - unlock_kernel(); - - info("USB Keyspan now disconnected"); } /* diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index ff9275057a18..7fce526560ca 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -98,7 +98,7 @@ struct mtouch_usb { dma_addr_t data_dma; struct urb *irq; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; char name[128]; char phys[64]; }; @@ -135,14 +135,14 @@ static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - input_regs(&mtouch->input, regs); - input_report_key(&mtouch->input, BTN_TOUCH, + input_regs(mtouch->input, regs); + input_report_key(mtouch->input, BTN_TOUCH, MTOUCHUSB_GET_TOUCHED(mtouch->data)); - input_report_abs(&mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data)); - input_report_abs(&mtouch->input, ABS_Y, + input_report_abs(mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data)); + input_report_abs(mtouch->input, ABS_Y, (raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC) - MTOUCHUSB_GET_YC(mtouch->data)); - input_sync(&mtouch->input); + input_sync(mtouch->input); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -195,10 +195,10 @@ static void mtouchusb_free_buffers(struct usb_device *udev, struct mtouch_usb *m static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct mtouch_usb *mtouch; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - char path[64]; int nRet; dbg("%s - called", __FUNCTION__); @@ -209,57 +209,55 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i dbg("%s - setting endpoint", __FUNCTION__); endpoint = &interface->endpoint[0].desc; - if (!(mtouch = kmalloc(sizeof(struct mtouch_usb), GFP_KERNEL))) { + mtouch = kzalloc(sizeof(struct mtouch_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { err("%s - Out of memory.", __FUNCTION__); - return -ENOMEM; + goto fail1; } - memset(mtouch, 0, sizeof(struct mtouch_usb)); - mtouch->udev = udev; - dbg("%s - allocating buffers", __FUNCTION__); - if (mtouchusb_alloc_buffers(udev, mtouch)) { - mtouchusb_free_buffers(udev, mtouch); - kfree(mtouch); - return -ENOMEM; - } + if (mtouchusb_alloc_buffers(udev, mtouch)) + goto fail2; - mtouch->input.private = mtouch; - mtouch->input.open = mtouchusb_open; - mtouch->input.close = mtouchusb_close; - - usb_make_path(udev, path, 64); - sprintf(mtouch->phys, "%s/input0", path); - - mtouch->input.name = mtouch->name; - mtouch->input.phys = mtouch->phys; - usb_to_input_id(udev, &mtouch->input.id); - mtouch->input.dev = &intf->dev; - - mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - /* Used to Scale Compensated Data and Flip Y */ - mtouch->input.absmin[ABS_X] = MTOUCHUSB_MIN_XC; - mtouch->input.absmax[ABS_X] = raw_coordinates ? - MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC; - mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ; - mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT; - mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC; - mtouch->input.absmax[ABS_Y] = raw_coordinates ? - MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC; - mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ; - mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT; + mtouch->udev = udev; + mtouch->input = input_dev; if (udev->manufacturer) - strcat(mtouch->name, udev->manufacturer); - if (udev->product) - sprintf(mtouch->name, "%s %s", mtouch->name, udev->product); + strlcpy(mtouch->name, udev->manufacturer, sizeof(mtouch->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(mtouch->name, " ", sizeof(mtouch->name)); + strlcat(mtouch->name, udev->product, sizeof(mtouch->name)); + } if (!strlen(mtouch->name)) - sprintf(mtouch->name, "USB Touchscreen %04x:%04x", - mtouch->input.id.vendor, mtouch->input.id.product); + snprintf(mtouch->name, sizeof(mtouch->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, mtouch->phys, sizeof(mtouch->phys)); + strlcpy(mtouch->phys, "/input0", sizeof(mtouch->phys)); + + input_dev->name = mtouch->name; + input_dev->phys = mtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = mtouch; + + input_dev->open = mtouchusb_open; + input_dev->close = mtouchusb_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, MTOUCHUSB_MIN_XC, + raw_coordinates ? MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC, + MTOUCHUSB_XC_FUZZ, MTOUCHUSB_XC_FLAT); + input_set_abs_params(input_dev, ABS_Y, MTOUCHUSB_MIN_YC, + raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC, + MTOUCHUSB_YC_FUZZ, MTOUCHUSB_YC_FLAT); nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_RESET, @@ -272,9 +270,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i mtouch->irq = usb_alloc_urb(0, GFP_KERNEL); if (!mtouch->irq) { dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__); - mtouchusb_free_buffers(udev, mtouch); - kfree(mtouch); - return -ENOMEM; + goto fail2; } dbg("%s - usb_fill_int_urb", __FUNCTION__); @@ -284,7 +280,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i mtouchusb_irq, mtouch, endpoint->bInterval); dbg("%s - input_register_device", __FUNCTION__); - input_register_device(&mtouch->input); + input_register_device(mtouch->input); nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_ASYNC_REPORT, @@ -293,10 +289,13 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", __FUNCTION__, nRet); - printk(KERN_INFO "input: %s on %s\n", mtouch->name, path); usb_set_intfdata(intf, mtouch); - return 0; + +fail2: mtouchusb_free_buffers(udev, mtouch); +fail1: input_free_device(input_dev); + kfree(mtouch); + return -ENOMEM; } static void mtouchusb_disconnect(struct usb_interface *intf) @@ -308,7 +307,7 @@ static void mtouchusb_disconnect(struct usb_interface *intf) if (mtouch) { dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__); usb_kill_urb(mtouch->irq); - input_unregister_device(&mtouch->input); + input_unregister_device(mtouch->input); usb_free_urb(mtouch->irq); mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch); kfree(mtouch); diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c index acc71ec560e9..a00672c96644 100644 --- a/drivers/usb/input/pid.c +++ b/drivers/usb/input/pid.c @@ -262,6 +262,7 @@ int hid_pid_init(struct hid_device *hid) { struct hid_ff_pid *private; struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; private = hid->ff_private = kzalloc(sizeof(struct hid_ff_pid), GFP_KERNEL); if (!private) @@ -281,11 +282,12 @@ int hid_pid_init(struct hid_device *hid) usb_fill_control_urb(private->urbffout, hid->dev, 0, (void *)&private->ffcr, private->ctrl_buffer, 8, hid_pid_ctrl_out, hid); - hidinput->input.upload_effect = hid_pid_upload_effect; - hidinput->input.flush = hid_pid_flush; - hidinput->input.ff_effects_max = 8; // A random default - set_bit(EV_FF, hidinput->input.evbit); - set_bit(EV_FF_STATUS, hidinput->input.evbit); + + input_dev->upload_effect = hid_pid_upload_effect; + input_dev->flush = hid_pid_flush; + input_dev->ff_effects_max = 8; // A random default + set_bit(EV_FF, input_dev->evbit); + set_bit(EV_FF_STATUS, input_dev->evbit); spin_lock_init(&private->lock); diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index ad4afe7e5897..b7476233ef5d 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -68,7 +68,7 @@ struct powermate_device { struct usb_ctrlrequest *configcr; dma_addr_t configcr_dma; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; spinlock_t lock; int static_brightness; int pulse_speed; @@ -106,10 +106,10 @@ static void powermate_irq(struct urb *urb, struct pt_regs *regs) } /* handle updates to device state */ - input_regs(&pm->input, regs); - input_report_key(&pm->input, BTN_0, pm->data[0] & 0x01); - input_report_rel(&pm->input, REL_DIAL, pm->data[1]); - input_sync(&pm->input); + input_regs(pm->input, regs); + input_report_key(pm->input, BTN_0, pm->data[0] & 0x01); + input_report_rel(pm->input, REL_DIAL, pm->data[1]); + input_sync(pm->input); exit: retval = usb_submit_urb (urb, GFP_ATOMIC); @@ -153,10 +153,10 @@ static void powermate_sync_state(struct powermate_device *pm) Only values of 'arg' quite close to 255 are particularly useful/spectacular. */ - if (pm->pulse_speed < 255){ + if (pm->pulse_speed < 255) { op = 0; // divide arg = 255 - pm->pulse_speed; - } else if (pm->pulse_speed > 255){ + } else if (pm->pulse_speed > 255) { op = 2; // multiply arg = pm->pulse_speed - 255; } else { @@ -166,11 +166,11 @@ static void powermate_sync_state(struct powermate_device *pm) pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE ); pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op ); pm->requires_update &= ~UPDATE_PULSE_MODE; - }else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS){ + } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) { pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS ); pm->configcr->wIndex = cpu_to_le16( pm->static_brightness ); pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS; - }else{ + } else { printk(KERN_ERR "powermate: unknown update required"); pm->requires_update = 0; /* fudge the bug */ return; @@ -228,19 +228,19 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne spin_lock_irqsave(&pm->lock, flags); /* mark state updates which are required */ - if (static_brightness != pm->static_brightness){ + if (static_brightness != pm->static_brightness) { pm->static_brightness = static_brightness; pm->requires_update |= UPDATE_STATIC_BRIGHTNESS; } - if (pulse_asleep != pm->pulse_asleep){ + if (pulse_asleep != pm->pulse_asleep) { pm->pulse_asleep = pulse_asleep; pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS); } - if (pulse_awake != pm->pulse_awake){ + if (pulse_awake != pm->pulse_awake) { pm->pulse_awake = pulse_awake; pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS); } - if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table){ + if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) { pm->pulse_speed = pulse_speed; pm->pulse_table = pulse_table; pm->requires_update |= UPDATE_PULSE_MODE; @@ -283,6 +283,7 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev SLAB_ATOMIC, &pm->data_dma); if (!pm->data) return -1; + pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)), SLAB_ATOMIC, &pm->configcr_dma); if (!pm->configcr) @@ -308,8 +309,9 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct powermate_device *pm; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; + int err = -ENOMEM; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; @@ -323,42 +325,61 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i 0, interface->desc.bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (!(pm = kmalloc(sizeof(struct powermate_device), GFP_KERNEL))) - return -ENOMEM; - - memset(pm, 0, sizeof(struct powermate_device)); - pm->udev = udev; + pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pm || !input_dev) + goto fail1; - if (powermate_alloc_buffers(udev, pm)) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (powermate_alloc_buffers(udev, pm)) + goto fail2; pm->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->irq) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (!pm->irq) + goto fail2; pm->config = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->config) { - usb_free_urb(pm->irq); - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (!pm->config) + goto fail3; + + pm->udev = udev; + pm->input = input_dev; + + usb_make_path(udev, pm->phys, sizeof(pm->phys)); + strlcpy(pm->phys, "/input0", sizeof(pm->phys)); spin_lock_init(&pm->lock); - init_input_dev(&pm->input); + + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case POWERMATE_PRODUCT_NEW: + input_dev->name = pm_name_powermate; + break; + case POWERMATE_PRODUCT_OLD: + input_dev->name = pm_name_soundknob; + break; + default: + input_dev->name = pm_name_soundknob; + printk(KERN_WARNING "powermate: unknown product id %04x\n", + le16_to_cpu(udev->descriptor.idProduct)); + } + + input_dev->phys = pm->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = pm; + + input_dev->event = powermate_input_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); + input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); /* get a handle to the interrupt data pipe */ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if(maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX){ - printk("powermate: Expected payload of %d--%d bytes, found %d bytes!\n", + if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) { + printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n", POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp); maxp = POWERMATE_PAYLOAD_SIZE_MAX; } @@ -371,35 +392,11 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i /* register our interrupt URB with the USB system */ if (usb_submit_urb(pm->irq, GFP_KERNEL)) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -EIO; /* failure */ + err = -EIO; + goto fail4; } - switch (le16_to_cpu(udev->descriptor.idProduct)) { - case POWERMATE_PRODUCT_NEW: pm->input.name = pm_name_powermate; break; - case POWERMATE_PRODUCT_OLD: pm->input.name = pm_name_soundknob; break; - default: - pm->input.name = pm_name_soundknob; - printk(KERN_WARNING "powermate: unknown product id %04x\n", - le16_to_cpu(udev->descriptor.idProduct)); - } - - pm->input.private = pm; - pm->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); - pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0); - pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); - pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); - usb_to_input_id(udev, &pm->input.id); - pm->input.event = powermate_input_event; - pm->input.dev = &intf->dev; - pm->input.phys = pm->phys; - - input_register_device(&pm->input); - - usb_make_path(udev, path, 64); - snprintf(pm->phys, 64, "%s/input0", path); - printk(KERN_INFO "input: %s on %s\n", pm->input.name, pm->input.phys); + input_register_device(pm->input); /* force an update of everything */ pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS; @@ -407,6 +404,13 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i usb_set_intfdata(intf, pm); return 0; + +fail4: usb_free_urb(pm->config); +fail3: usb_free_urb(pm->irq); +fail2: powermate_free_buffers(udev, pm); +fail1: input_free_device(input_dev); + kfree(pm); + return err; } /* Called when a USB device we've accepted ownership of is removed */ @@ -418,7 +422,7 @@ static void powermate_disconnect(struct usb_interface *intf) if (pm) { pm->requires_update = 0; usb_kill_urb(pm->irq); - input_unregister_device(&pm->input); + input_unregister_device(pm->input); usb_free_urb(pm->irq); usb_free_urb(pm->config); powermate_free_buffers(interface_to_usbdev(intf), pm); diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 4276c24a5080..3766ccc271be 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -68,7 +68,7 @@ struct touchkit_usb { dma_addr_t data_dma; struct urb *irq; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; char name[128]; char phys[64]; }; @@ -115,12 +115,12 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) y = TOUCHKIT_GET_Y(touchkit->data); } - input_regs(&touchkit->input, regs); - input_report_key(&touchkit->input, BTN_TOUCH, + input_regs(touchkit->input, regs); + input_report_key(touchkit->input, BTN_TOUCH, TOUCHKIT_GET_TOUCHED(touchkit->data)); - input_report_abs(&touchkit->input, ABS_X, x); - input_report_abs(&touchkit->input, ABS_Y, y); - input_sync(&touchkit->input); + input_report_abs(touchkit->input, ABS_X, x); + input_report_abs(touchkit->input, ABS_Y, y); + input_sync(touchkit->input); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -171,87 +171,81 @@ static void touchkit_free_buffers(struct usb_device *udev, static int touchkit_probe(struct usb_interface *intf, const struct usb_device_id *id) { - int ret; struct touchkit_usb *touchkit; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - char path[64]; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - touchkit = kmalloc(sizeof(struct touchkit_usb), GFP_KERNEL); - if (!touchkit) - return -ENOMEM; - - memset(touchkit, 0, sizeof(struct touchkit_usb)); - touchkit->udev = udev; - - if (touchkit_alloc_buffers(udev, touchkit)) { - ret = -ENOMEM; + touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!touchkit || !input_dev) goto out_free; - } - - touchkit->input.private = touchkit; - touchkit->input.open = touchkit_open; - touchkit->input.close = touchkit_close; - - usb_make_path(udev, path, 64); - sprintf(touchkit->phys, "%s/input0", path); - - touchkit->input.name = touchkit->name; - touchkit->input.phys = touchkit->phys; - usb_to_input_id(udev, &touchkit->input.id); - touchkit->input.dev = &intf->dev; - - touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - touchkit->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - touchkit->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - /* Used to Scale Compensated Data */ - touchkit->input.absmin[ABS_X] = TOUCHKIT_MIN_XC; - touchkit->input.absmax[ABS_X] = TOUCHKIT_MAX_XC; - touchkit->input.absfuzz[ABS_X] = TOUCHKIT_XC_FUZZ; - touchkit->input.absflat[ABS_X] = TOUCHKIT_XC_FLAT; - touchkit->input.absmin[ABS_Y] = TOUCHKIT_MIN_YC; - touchkit->input.absmax[ABS_Y] = TOUCHKIT_MAX_YC; - touchkit->input.absfuzz[ABS_Y] = TOUCHKIT_YC_FUZZ; - touchkit->input.absflat[ABS_Y] = TOUCHKIT_YC_FLAT; - - if (udev->manufacturer) - strcat(touchkit->name, udev->manufacturer); - if (udev->product) - sprintf(touchkit->name, "%s %s", touchkit->name, udev->product); - if (!strlen(touchkit->name)) - sprintf(touchkit->name, "USB Touchscreen %04x:%04x", - touchkit->input.id.vendor, touchkit->input.id.product); + if (touchkit_alloc_buffers(udev, touchkit)) + goto out_free; touchkit->irq = usb_alloc_urb(0, GFP_KERNEL); if (!touchkit->irq) { dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__); - ret = -ENOMEM; goto out_free_buffers; } + touchkit->udev = udev; + touchkit->input = input_dev; + + if (udev->manufacturer) + strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(touchkit->name, " ", sizeof(touchkit->name)); + strlcat(touchkit->name, udev->product, sizeof(touchkit->name)); + } + + if (!strlen(touchkit->name)) + snprintf(touchkit->name, sizeof(touchkit->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys)); + strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys)); + + input_dev->name = touchkit->name; + input_dev->phys = touchkit->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = touchkit; + input_dev->open = touchkit_open; + input_dev->close = touchkit_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC, + TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT); + input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC, + TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT); + usb_fill_int_urb(touchkit->irq, touchkit->udev, - usb_rcvintpipe(touchkit->udev, 0x81), - touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, - touchkit_irq, touchkit, endpoint->bInterval); + usb_rcvintpipe(touchkit->udev, 0x81), + touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, + touchkit_irq, touchkit, endpoint->bInterval); - input_register_device(&touchkit->input); + input_register_device(touchkit->input); - printk(KERN_INFO "input: %s on %s\n", touchkit->name, path); usb_set_intfdata(intf, touchkit); - return 0; out_free_buffers: touchkit_free_buffers(udev, touchkit); out_free: + input_free_device(input_dev); kfree(touchkit); - return ret; + return -ENOMEM; } static void touchkit_disconnect(struct usb_interface *intf) @@ -265,8 +259,8 @@ static void touchkit_disconnect(struct usb_interface *intf) dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__); usb_set_intfdata(intf, NULL); - input_unregister_device(&touchkit->input); usb_kill_urb(touchkit->irq); + input_unregister_device(touchkit->input); usb_free_urb(touchkit->irq); touchkit_free_buffers(interface_to_usbdev(intf), touchkit); kfree(touchkit); diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 28987f15eeee..226b6f90a907 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -66,7 +66,7 @@ static unsigned char usb_kbd_keycode[256] = { }; struct usb_kbd { - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; unsigned char old[8]; struct urb *irq, *led; @@ -99,29 +99,29 @@ static void usb_kbd_irq(struct urb *urb, struct pt_regs *regs) goto resubmit; } - input_regs(&kbd->dev, regs); + input_regs(kbd->dev, regs); for (i = 0; i < 8; i++) - input_report_key(&kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); + input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); for (i = 2; i < 8; i++) { if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) { if (usb_kbd_keycode[kbd->old[i]]) - input_report_key(&kbd->dev, usb_kbd_keycode[kbd->old[i]], 0); + input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0); else info("Unknown key (scancode %#x) released.", kbd->old[i]); } if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) { if (usb_kbd_keycode[kbd->new[i]]) - input_report_key(&kbd->dev, usb_kbd_keycode[kbd->new[i]], 1); + input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1); else info("Unknown key (scancode %#x) pressed.", kbd->new[i]); } } - input_sync(&kbd->dev); + input_sync(kbd->dev); memcpy(kbd->old, kbd->new, 8); @@ -227,12 +227,12 @@ static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd) static int usb_kbd_probe(struct usb_interface *iface, const struct usb_device_id *id) { - struct usb_device * dev = interface_to_usbdev(iface); + struct usb_device *dev = interface_to_usbdev(iface); struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_kbd *kbd; + struct input_dev *input_dev; int i, pipe, maxp; - char path[64]; interface = iface->cur_altsetting; @@ -240,37 +240,59 @@ static int usb_kbd_probe(struct usb_interface *iface, return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - if (!(kbd = kmalloc(sizeof(struct usb_kbd), GFP_KERNEL))) - return -ENOMEM; - memset(kbd, 0, sizeof(struct usb_kbd)); + kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbd || !input_dev) + goto fail1; - if (usb_kbd_alloc_mem(dev, kbd)) { - usb_kbd_free_mem(dev, kbd); - kfree(kbd); - return -ENOMEM; - } + if (usb_kbd_alloc_mem(dev, kbd)) + goto fail2; kbd->usbdev = dev; + kbd->dev = input_dev; + + if (dev->manufacturer) + strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(kbd->name, " ", sizeof(kbd->name)); + strlcat(kbd->name, dev->product, sizeof(kbd->name)); + } + + if (!strlen(kbd->name)) + snprintf(kbd->name, sizeof(kbd->name), + "USB HIDBP Keyboard %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + usb_make_path(dev, kbd->phys, sizeof(kbd->phys)); + strlcpy(kbd->phys, "/input0", sizeof(kbd->phys)); - kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); - kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA); + input_dev->name = kbd->name; + input_dev->phys = kbd->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &iface->dev; + input_dev->private = kbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA); for (i = 0; i < 255; i++) - set_bit(usb_kbd_keycode[i], kbd->dev.keybit); - clear_bit(0, kbd->dev.keybit); + set_bit(usb_kbd_keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - kbd->dev.private = kbd; - kbd->dev.event = usb_kbd_event; - kbd->dev.open = usb_kbd_open; - kbd->dev.close = usb_kbd_close; + input_dev->event = usb_kbd_event; + input_dev->open = usb_kbd_open; + input_dev->close = usb_kbd_close; usb_fill_int_urb(kbd->irq, dev, pipe, kbd->new, (maxp > 8 ? 8 : maxp), @@ -284,37 +306,22 @@ static int usb_kbd_probe(struct usb_interface *iface, kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); kbd->cr->wLength = cpu_to_le16(1); - usb_make_path(dev, path, 64); - sprintf(kbd->phys, "%s/input0", path); - - kbd->dev.name = kbd->name; - kbd->dev.phys = kbd->phys; - usb_to_input_id(dev, &kbd->dev.id); - kbd->dev.dev = &iface->dev; - - if (dev->manufacturer) - strcat(kbd->name, dev->manufacturer); - if (dev->product) - sprintf(kbd->name, "%s %s", kbd->name, dev->product); - - if (!strlen(kbd->name)) - sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x", - kbd->dev.id.vendor, kbd->dev.id.product); - usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0), (void *) kbd->cr, kbd->leds, 1, usb_kbd_led, kbd); kbd->led->setup_dma = kbd->cr_dma; kbd->led->transfer_dma = kbd->leds_dma; - kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP - | URB_NO_SETUP_DMA_MAP); + kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); - input_register_device(&kbd->dev); - - printk(KERN_INFO "input: %s on %s\n", kbd->name, path); + input_register_device(kbd->dev); usb_set_intfdata(iface, kbd); return 0; + +fail2: usb_kbd_free_mem(dev, kbd); +fail1: input_free_device(input_dev); + kfree(kbd); + return -ENOMEM; } static void usb_kbd_disconnect(struct usb_interface *intf) @@ -324,7 +331,7 @@ static void usb_kbd_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (kbd) { usb_kill_urb(kbd->irq); - input_unregister_device(&kbd->dev); + input_unregister_device(kbd->dev); usb_kbd_free_mem(interface_to_usbdev(intf), kbd); kfree(kbd); } diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 4104dec847fb..230f6b1b314a 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -50,7 +50,7 @@ struct usb_mouse { char name[128]; char phys[64]; struct usb_device *usbdev; - struct input_dev dev; + struct input_dev *dev; struct urb *irq; signed char *data; @@ -61,7 +61,7 @@ static void usb_mouse_irq(struct urb *urb, struct pt_regs *regs) { struct usb_mouse *mouse = urb->context; signed char *data = mouse->data; - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; int status; switch (urb->status) { @@ -115,14 +115,14 @@ static void usb_mouse_close(struct input_dev *dev) usb_kill_urb(mouse->irq); } -static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_id * id) +static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct usb_device * dev = interface_to_usbdev(intf); + struct usb_device *dev = interface_to_usbdev(intf); struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_mouse *mouse; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; interface = intf->cur_altsetting; @@ -130,59 +130,62 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_ return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL))) - return -ENOMEM; - memset(mouse, 0, sizeof(struct usb_mouse)); + mouse = kzalloc(sizeof(struct usb_mouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mouse || !input_dev) + goto fail1; mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma); - if (!mouse->data) { - kfree(mouse); - return -ENOMEM; - } + if (!mouse->data) + goto fail1; mouse->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!mouse->irq) { - usb_buffer_free(dev, 8, mouse->data, mouse->data_dma); - kfree(mouse); - return -ENODEV; - } + if (!mouse->irq) + goto fail2; mouse->usbdev = dev; + mouse->dev = input_dev; + + if (dev->manufacturer) + strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name)); - mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - mouse->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA); - mouse->dev.relbit[0] |= BIT(REL_WHEEL); + if (dev->product) { + if (dev->manufacturer) + strlcat(mouse->name, " ", sizeof(mouse->name)); + strlcat(mouse->name, dev->product, sizeof(mouse->name)); + } - mouse->dev.private = mouse; - mouse->dev.open = usb_mouse_open; - mouse->dev.close = usb_mouse_close; + if (!strlen(mouse->name)) + snprintf(mouse->name, sizeof(mouse->name), + "USB HIDBP Mouse %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); - usb_make_path(dev, path, 64); - sprintf(mouse->phys, "%s/input0", path); + usb_make_path(dev, mouse->phys, sizeof(mouse->phys)); + strlcat(mouse->phys, "/input0", sizeof(mouse->phys)); - mouse->dev.name = mouse->name; - mouse->dev.phys = mouse->phys; - usb_to_input_id(dev, &mouse->dev.id); - mouse->dev.dev = &intf->dev; + input_dev->name = mouse->name; + input_dev->phys = mouse->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; - if (dev->manufacturer) - strcat(mouse->name, dev->manufacturer); - if (dev->product) - sprintf(mouse->name, "%s %s", mouse->name, dev->product); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->relbit[0] |= BIT(REL_WHEEL); - if (!strlen(mouse->name)) - sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x", - mouse->dev.id.vendor, mouse->dev.id.product); + input_dev->private = mouse; + input_dev->open = usb_mouse_open; + input_dev->close = usb_mouse_close; usb_fill_int_urb(mouse->irq, dev, pipe, mouse->data, (maxp > 8 ? 8 : maxp), @@ -190,11 +193,15 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_ mouse->irq->transfer_dma = mouse->data_dma; mouse->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&mouse->dev); - printk(KERN_INFO "input: %s on %s\n", mouse->name, path); + input_register_device(mouse->dev); usb_set_intfdata(intf, mouse); return 0; + +fail2: usb_buffer_free(dev, 8, mouse->data, mouse->data_dma); +fail1: input_free_device(input_dev); + kfree(mouse); + return -ENOMEM; } static void usb_mouse_disconnect(struct usb_interface *intf) @@ -204,7 +211,7 @@ static void usb_mouse_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (mouse) { usb_kill_urb(mouse->irq); - input_unregister_device(&mouse->dev); + input_unregister_device(mouse->dev); usb_free_urb(mouse->irq); usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma); kfree(mouse); diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index 3b266af3048a..ea0f75773ae1 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -111,7 +111,7 @@ struct wacom_features { struct wacom { signed char *data; dma_addr_t data_dma; - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; struct urb *irq; struct wacom_features *features; @@ -135,7 +135,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int prox, pressure; int retval; @@ -225,7 +225,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int retval; switch (urb->status) { @@ -275,7 +275,7 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int retval; switch (urb->status) { @@ -318,7 +318,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int x, y; int retval; @@ -397,7 +397,7 @@ static int wacom_intuos_inout(struct urb *urb) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int idx; /* tool number */ @@ -479,7 +479,7 @@ static void wacom_intuos_general(struct urb *urb) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; unsigned int t; /* general pen packet */ @@ -509,7 +509,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; unsigned int t; int idx; int retval; @@ -738,95 +738,83 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i { struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; - char rep_data[2] = {0x02, 0x02}; struct wacom *wacom; - char path[64]; + struct input_dev *input_dev; + char rep_data[2] = {0x02, 0x02}; - if (!(wacom = kmalloc(sizeof(struct wacom), GFP_KERNEL))) - return -ENOMEM; - memset(wacom, 0, sizeof(struct wacom)); + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev) + goto fail1; wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); - if (!wacom->data) { - kfree(wacom); - return -ENOMEM; - } + if (!wacom->data) + goto fail1; wacom->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!wacom->irq) { - usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); - kfree(wacom); - return -ENOMEM; - } + if (!wacom->irq) + goto fail2; + + wacom->usbdev = dev; + wacom->dev = input_dev; + usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); + strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); wacom->features = wacom_features + (id - wacom_ids); + if (wacom->features->pktlen > 10) + BUG(); + + input_dev->name = wacom->features->name; + usb_to_input_id(dev, &input_dev->id); - wacom->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); - wacom->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_dev->cdev.dev = &intf->dev; + input_dev->private = wacom; + input_dev->open = wacom_open; + input_dev->close = wacom_close; + + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { case GRAPHIRE: - wacom->dev.evbit[0] |= BIT(EV_REL); - wacom->dev.relbit[0] |= BIT(REL_WHEEL); - wacom->dev.absbit[0] |= BIT(ABS_DISTANCE); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); break; case INTUOS3: case CINTIQ: - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - wacom->dev.absbit[0] |= BIT(ABS_RX) | BIT(ABS_RY); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); /* fall through */ case INTUOS: - wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); - wacom->dev.mscbit[0] |= BIT(MSC_SERIAL); - wacom->dev.relbit[0] |= BIT(REL_WHEEL); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) + input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); - wacom->dev.absbit[0] |= BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); break; case PL: - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); break; } - wacom->dev.absmax[ABS_X] = wacom->features->x_max; - wacom->dev.absmax[ABS_Y] = wacom->features->y_max; - wacom->dev.absmax[ABS_PRESSURE] = wacom->features->pressure_max; - wacom->dev.absmax[ABS_DISTANCE] = wacom->features->distance_max; - wacom->dev.absmax[ABS_TILT_X] = 127; - wacom->dev.absmax[ABS_TILT_Y] = 127; - wacom->dev.absmax[ABS_WHEEL] = 1023; - - wacom->dev.absmax[ABS_RX] = 4097; - wacom->dev.absmax[ABS_RY] = 4097; - wacom->dev.absmin[ABS_RZ] = -900; - wacom->dev.absmax[ABS_RZ] = 899; - wacom->dev.absmin[ABS_THROTTLE] = -1023; - wacom->dev.absmax[ABS_THROTTLE] = 1023; - - wacom->dev.absfuzz[ABS_X] = 4; - wacom->dev.absfuzz[ABS_Y] = 4; - - wacom->dev.private = wacom; - wacom->dev.open = wacom_open; - wacom->dev.close = wacom_close; - - usb_make_path(dev, path, 64); - sprintf(wacom->phys, "%s/input0", path); - - wacom->dev.name = wacom->features->name; - wacom->dev.phys = wacom->phys; - usb_to_input_id(dev, &wacom->dev.id); - wacom->dev.dev = &intf->dev; - wacom->usbdev = dev; - endpoint = &intf->cur_altsetting->endpoint[0].desc; if (wacom->features->pktlen > 10) @@ -839,18 +827,20 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom->irq->transfer_dma = wacom->data_dma; wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&wacom->dev); + input_register_device(wacom->dev); /* ask the tablet to report tablet data */ usb_set_report(intf, 3, 2, rep_data, 2); /* repeat once (not sure why the first call often fails) */ usb_set_report(intf, 3, 2, rep_data, 2); - printk(KERN_INFO "input: %s on %s\n", wacom->features->name, path); - usb_set_intfdata(intf, wacom); - return 0; + +fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); +fail1: input_free_device(input_dev); + kfree(wacom); + return -ENOMEM; } static void wacom_disconnect(struct usb_interface *intf) @@ -860,7 +850,7 @@ static void wacom_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (wacom) { usb_kill_urb(wacom->irq); - input_unregister_device(&wacom->dev); + input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma); kfree(wacom); diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 18125e0bffa2..43112f040b6d 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -103,7 +103,7 @@ static struct usb_device_id xpad_table [] = { MODULE_DEVICE_TABLE (usb, xpad_table); struct usb_xpad { - struct input_dev dev; /* input device interface */ + struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ struct urb *irq_in; /* urb for interrupt in report */ @@ -125,7 +125,7 @@ struct usb_xpad { static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data, struct pt_regs *regs) { - struct input_dev *dev = &xpad->dev; + struct input_dev *dev = xpad->dev; input_regs(dev, regs); @@ -214,9 +214,9 @@ static void xpad_close (struct input_dev *dev) static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev (intf); - struct usb_xpad *xpad = NULL; + struct usb_xpad *xpad; + struct input_dev *input_dev; struct usb_endpoint_descriptor *ep_irq_in; - char path[64]; int i; for (i = 0; xpad_device[i].idVendor; i++) { @@ -225,89 +225,80 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id break; } - if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) { - err("cannot allocate memory for new pad"); - return -ENOMEM; - } - memset(xpad, 0, sizeof(struct usb_xpad)); + xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xpad || !input_dev) + goto fail1; xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, SLAB_ATOMIC, &xpad->idata_dma); - if (!xpad->idata) { - kfree(xpad); - return -ENOMEM; - } + if (!xpad->idata) + goto fail1; xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->irq_in) { - err("cannot allocate memory for new pad irq urb"); - usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); - kfree(xpad); - return -ENOMEM; - } - - ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; - - usb_fill_int_urb(xpad->irq_in, udev, - usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), - xpad->idata, XPAD_PKT_LEN, xpad_irq_in, - xpad, ep_irq_in->bInterval); - xpad->irq_in->transfer_dma = xpad->idata_dma; - xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (!xpad->irq_in) + goto fail2; xpad->udev = udev; + xpad->dev = input_dev; + usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); + strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); - usb_to_input_id(udev, &xpad->dev.id); - xpad->dev.dev = &intf->dev; - xpad->dev.private = xpad; - xpad->dev.name = xpad_device[i].name; - xpad->dev.phys = xpad->phys; - xpad->dev.open = xpad_open; - xpad->dev.close = xpad_close; - - usb_make_path(udev, path, 64); - snprintf(xpad->phys, 64, "%s/input0", path); + input_dev->name = xpad_device[i].name; + input_dev->phys = xpad->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = xpad; + input_dev->open = xpad_open; + input_dev->close = xpad_close; - xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; xpad_btn[i] >= 0; i++) - set_bit(xpad_btn[i], xpad->dev.keybit); + set_bit(xpad_btn[i], input_dev->keybit); for (i = 0; xpad_abs[i] >= 0; i++) { signed short t = xpad_abs[i]; - set_bit(t, xpad->dev.absbit); + set_bit(t, input_dev->absbit); switch (t) { case ABS_X: case ABS_Y: case ABS_RX: case ABS_RY: /* the two sticks */ - xpad->dev.absmax[t] = 32767; - xpad->dev.absmin[t] = -32768; - xpad->dev.absflat[t] = 128; - xpad->dev.absfuzz[t] = 16; + input_set_abs_params(input_dev, t, -32768, 32767, 16, 128); break; case ABS_Z: case ABS_RZ: /* the triggers */ - xpad->dev.absmax[t] = 255; - xpad->dev.absmin[t] = 0; + input_set_abs_params(input_dev, t, 0, 255, 0, 0); break; case ABS_HAT0X: case ABS_HAT0Y: /* the d-pad */ - xpad->dev.absmax[t] = 1; - xpad->dev.absmin[t] = -1; + input_set_abs_params(input_dev, t, -1, 1, 0, 0); break; } } - input_register_device(&xpad->dev); + ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(xpad->irq_in, udev, + usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), + xpad->idata, XPAD_PKT_LEN, xpad_irq_in, + xpad, ep_irq_in->bInterval); + xpad->irq_in->transfer_dma = xpad->idata_dma; + xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - printk(KERN_INFO "input: %s on %s", xpad->dev.name, path); + input_register_device(xpad->dev); usb_set_intfdata(intf, xpad); return 0; + +fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); +fail1: input_free_device(input_dev); + kfree(xpad); + return -ENOMEM; + } static void xpad_disconnect(struct usb_interface *intf) @@ -317,7 +308,7 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (xpad) { usb_kill_urb(xpad->irq_in); - input_unregister_device(&xpad->dev); + input_unregister_device(xpad->dev); usb_free_urb(xpad->irq_in); usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); kfree(xpad); diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 58a176ef96a5..f526aebea502 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -54,6 +54,7 @@ #include #include #include +#include #include "map_to_7segment.h" #include "yealink.h" @@ -101,12 +102,12 @@ static const struct lcd_segment_map { }; struct yealink_dev { - struct input_dev idev; /* input device */ + struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ /* irq input channel */ struct yld_ctl_packet *irq_data; - dma_addr_t irq_dma; + dma_addr_t irq_dma; struct urb *urb_irq; /* control output channel */ @@ -237,7 +238,7 @@ static int map_p1k_to_key(int scancode) */ static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs) { - struct input_dev *idev = &yld->idev; + struct input_dev *idev = yld->idev; input_regs(idev, regs); if (yld->key_code >= 0) { @@ -809,8 +810,12 @@ static int usb_cleanup(struct yealink_dev *yld, int err) } if (yld->urb_ctl) usb_free_urb(yld->urb_ctl); - if (yld->idev.dev) - input_unregister_device(&yld->idev); + if (yld->idev) { + if (err) + input_free_device(yld->idev); + else + input_unregister_device(yld->idev); + } if (yld->ctl_req) usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), yld->ctl_req, yld->ctl_req_dma); @@ -857,7 +862,7 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct yealink_dev *yld; - char path[64]; + struct input_dev *input_dev; int ret, pipe, i; i = usb_match(udev); @@ -866,17 +871,21 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -EIO; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -EIO; - if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL) + yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); + if (!yld) return -ENOMEM; - memset(yld, 0, sizeof(*yld)); yld->udev = udev; + yld->idev = input_dev = input_allocate_device(); + if (!input_dev) + return usb_cleanup(yld, -ENOMEM); + /* allocate usb buffers */ yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN, SLAB_ATOMIC, &yld->irq_dma); @@ -935,42 +944,37 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) yld->urb_ctl->dev = udev; /* find out the physical bus location */ - if (usb_make_path(udev, path, sizeof(path)) > 0) - snprintf(yld->phys, sizeof(yld->phys)-1, "%s/input0", path); + usb_make_path(udev, yld->phys, sizeof(yld->phys)); + strlcat(yld->phys, "/input0", sizeof(yld->phys)); /* register settings for the input device */ - init_input_dev(&yld->idev); - yld->idev.private = yld; - yld->idev.id.bustype = BUS_USB; - yld->idev.id.vendor = le16_to_cpu(udev->descriptor.idVendor); - yld->idev.id.product = le16_to_cpu(udev->descriptor.idProduct); - yld->idev.id.version = le16_to_cpu(udev->descriptor.bcdDevice); - yld->idev.dev = &intf->dev; - yld->idev.name = yld_device[i].name; - yld->idev.phys = yld->phys; - /* yld->idev.event = input_ev; TODO */ - yld->idev.open = input_open; - yld->idev.close = input_close; + input_dev->name = yld_device[i].name; + input_dev->phys = yld->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + + input_dev->private = yld; + input_dev->open = input_open; + input_dev->close = input_close; + /* input_dev->event = input_ev; TODO */ /* register available key events */ - yld->idev.evbit[0] = BIT(EV_KEY); + input_dev->evbit[0] = BIT(EV_KEY); for (i = 0; i < 256; i++) { int k = map_p1k_to_key(i); if (k >= 0) { - set_bit(k & 0xff, yld->idev.keybit); + set_bit(k & 0xff, input_dev->keybit); if (k >> 8) - set_bit(k >> 8, yld->idev.keybit); + set_bit(k >> 8, input_dev->keybit); } } - printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path); - - input_register_device(&yld->idev); + input_register_device(yld->idev); usb_set_intfdata(intf, yld); /* clear visible elements */ - for (i=0; i Date: Thu, 15 Sep 2005 02:01:48 -0500 Subject: [PATCH] Input: convert ucb1x00-ts to dynamic input_dev allocation Input: convert ucb1x00-ts to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/mfd/ucb1x00-ts.c | 43 ++++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index a260f83bcb02..585cded3d365 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -40,7 +40,7 @@ struct ucb1x00_ts { - struct input_dev idev; + struct input_dev *idev; struct ucb1x00 *ucb; wait_queue_head_t irq_wait; @@ -56,16 +56,16 @@ static int adcsync; static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) { - input_report_abs(&ts->idev, ABS_X, x); - input_report_abs(&ts->idev, ABS_Y, y); - input_report_abs(&ts->idev, ABS_PRESSURE, pressure); - input_sync(&ts->idev); + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, pressure); + input_sync(ts->idev); } static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) { - input_report_abs(&ts->idev, ABS_PRESSURE, 0); - input_sync(&ts->idev); + input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_sync(ts->idev); } /* @@ -341,26 +341,30 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts; - ts = kmalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); + ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); if (!ts) return -ENOMEM; - memset(ts, 0, sizeof(struct ucb1x00_ts)); + ts->idev = input_allocate_device(); + if (!ts->idev) { + kfree(ts); + return -ENOMEM; + } ts->ucb = dev->ucb; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; - ts->idev.name = "Touchscreen panel"; - ts->idev.id.product = ts->ucb->id; - ts->idev.open = ucb1x00_ts_open; - ts->idev.close = ucb1x00_ts_close; + ts->idev->name = "Touchscreen panel"; + ts->idev->id.product = ts->ucb->id; + ts->idev->open = ucb1x00_ts_open; + ts->idev->close = ucb1x00_ts_close; - __set_bit(EV_ABS, ts->idev.evbit); - __set_bit(ABS_X, ts->idev.absbit); - __set_bit(ABS_Y, ts->idev.absbit); - __set_bit(ABS_PRESSURE, ts->idev.absbit); + __set_bit(EV_ABS, ts->idev->evbit); + __set_bit(ABS_X, ts->idev->absbit); + __set_bit(ABS_Y, ts->idev->absbit); + __set_bit(ABS_PRESSURE, ts->idev->absbit); - input_register_device(&ts->idev); + input_register_device(ts->idev); dev->priv = ts; @@ -370,7 +374,8 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts = dev->priv; - input_unregister_device(&ts->idev); + + input_unregister_device(ts->idev); kfree(ts); } -- cgit v1.2.3 From eca1ed196cd5b523c1057204cd3672555ad58dfe Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:46 -0500 Subject: [PATCH] drivers/input/touchscreen: convert to dynamic input_dev allocation Input: convert drivers/input/touchscreen to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/touchscreen/corgi_ts.c | 89 ++++++++--------- drivers/input/touchscreen/elo.c | 89 +++++++++-------- drivers/input/touchscreen/gunze.c | 66 ++++++------- drivers/input/touchscreen/h3600_ts_input.c | 149 ++++++++++++----------------- drivers/input/touchscreen/hp680_ts_input.c | 50 +++++----- drivers/input/touchscreen/mk712.c | 80 ++++++++-------- drivers/input/touchscreen/mtouch.c | 64 ++++++------- 7 files changed, 279 insertions(+), 308 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 4c7fbe550365..40ae183ba1cd 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -41,8 +41,7 @@ struct ts_event { }; struct corgi_ts { - char phys[32]; - struct input_dev input; + struct input_dev *input; struct timer_list timer; struct ts_event tc; int pendown; @@ -182,14 +181,12 @@ static void new_data(struct corgi_ts *corgi_ts, struct pt_regs *regs) if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) return; - if (regs) - input_regs(&corgi_ts->input, regs); - - input_report_abs(&corgi_ts->input, ABS_X, corgi_ts->tc.x); - input_report_abs(&corgi_ts->input, ABS_Y, corgi_ts->tc.y); - input_report_abs(&corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(&corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0)); - input_sync(&corgi_ts->input); + input_regs(corgi_ts->input, regs); + input_report_abs(corgi_ts->input, ABS_X, corgi_ts->tc.x); + input_report_abs(corgi_ts->input, ABS_Y, corgi_ts->tc.y); + input_report_abs(corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure); + input_report_key(corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0)); + input_sync(corgi_ts->input); } static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_regs *regs) @@ -273,39 +270,44 @@ static int __init corgits_probe(struct device *dev) { struct corgi_ts *corgi_ts; struct platform_device *pdev = to_platform_device(dev); + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(corgi_ts = kmalloc(sizeof(struct corgi_ts), GFP_KERNEL))) - return -ENOMEM; + corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!corgi_ts || !input_dev) + goto fail; dev_set_drvdata(dev, corgi_ts); - memset(corgi_ts, 0, sizeof(struct corgi_ts)); - corgi_ts->machinfo = dev->platform_data; corgi_ts->irq_gpio = platform_get_irq(pdev, 0); if (corgi_ts->irq_gpio < 0) { - kfree(corgi_ts); - return -ENODEV; + err = -ENODEV; + goto fail; } - init_input_dev(&corgi_ts->input); - corgi_ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - corgi_ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&corgi_ts->input, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(&corgi_ts->input, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(&corgi_ts->input, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); + corgi_ts->input = input_dev; - strcpy(corgi_ts->phys, "corgits/input0"); + init_timer(&corgi_ts->timer); + corgi_ts->timer.data = (unsigned long) corgi_ts; + corgi_ts->timer.function = corgi_ts_timer; - corgi_ts->input.private = corgi_ts; - corgi_ts->input.name = "Corgi Touchscreen"; - corgi_ts->input.dev = dev; - corgi_ts->input.phys = corgi_ts->phys; - corgi_ts->input.id.bustype = BUS_HOST; - corgi_ts->input.id.vendor = 0x0001; - corgi_ts->input.id.product = 0x0002; - corgi_ts->input.id.version = 0x0100; + input_dev->name = "Corgi Touchscreen"; + input_dev->phys = "corgits/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = dev; + input_dev->private = corgi_ts; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); @@ -319,25 +321,24 @@ static int __init corgits_probe(struct device *dev) corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); mdelay(5); - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_register_device(&corgi_ts->input); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) { - input_unregister_device(&corgi_ts->input); - kfree(corgi_ts); - return -EBUSY; + err = -EBUSY; + goto fail; } + input_register_device(corgi_ts->input); + + corgi_ts->power_mode = PWR_MODE_ACTIVE; + /* Enable Falling Edge */ set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); - printk(KERN_INFO "input: Corgi Touchscreen Registered\n"); - return 0; + + fail: input_free_device(input_dev); + kfree(corgi_ts); + return err; + } static int corgits_remove(struct device *dev) @@ -347,7 +348,7 @@ static int corgits_remove(struct device *dev) free_irq(corgi_ts->irq_gpio, NULL); del_timer_sync(&corgi_ts->timer); corgi_ts->machinfo->put_hsync(); - input_unregister_device(&corgi_ts->input); + input_unregister_device(corgi_ts->input); kfree(corgi_ts); return 0; } diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index 3cdc9cab688d..c86a2eb310fd 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -36,14 +36,12 @@ MODULE_LICENSE("GPL"); #define ELO_MAX_LENGTH 10 -static char *elo_name = "Elo Serial TouchScreen"; - /* * Per-touchscreen data. */ struct elo { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int id; int idx; @@ -54,7 +52,7 @@ struct elo { static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->csum += elo->data[elo->idx] = data; @@ -80,7 +78,7 @@ static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_r input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); input_report_abs(dev, ABS_PRESSURE, (elo->data[8] << 8) | elo->data[7]); - input_report_key(dev, BTN_TOUCH, elo->data[2] & 3); + input_report_key(dev, BTN_TOUCH, elo->data[8] || elo->data[7]); input_sync(dev); } elo->idx = 0; @@ -91,7 +89,7 @@ static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_r static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; @@ -129,7 +127,7 @@ static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_re case 5: if ((data & 0xf0) == 0) { input_report_abs(dev, ABS_PRESSURE, elo->data[5]); - input_report_key(dev, BTN_TOUCH, elo->data[5]); + input_report_key(dev, BTN_TOUCH, !!elo->data[5]); } input_sync(dev); elo->idx = 0; @@ -139,7 +137,7 @@ static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_re static void elo_process_data_3(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; @@ -191,7 +189,7 @@ static void elo_disconnect(struct serio *serio) { struct elo* elo = serio_get_drvdata(serio); - input_unregister_device(&elo->dev); + input_unregister_device(elo->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(elo); @@ -206,67 +204,68 @@ static void elo_disconnect(struct serio *serio) static int elo_connect(struct serio *serio, struct serio_driver *drv) { struct elo *elo; + struct input_dev *input_dev; int err; - if (!(elo = kmalloc(sizeof(struct elo), GFP_KERNEL))) - return -ENOMEM; + elo = kzalloc(sizeof(struct elo), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!elo || !input_dev) { + err = -ENOMEM; + goto fail; + } - memset(elo, 0, sizeof(struct elo)); + elo->serio = serio; + elo->id = serio->id.id; + elo->dev = input_dev; + snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys); - init_input_dev(&elo->dev); - elo->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - elo->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->private = elo; + input_dev->name = "Elo Serial TouchScreen"; + input_dev->phys = elo->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_ELO; + input_dev->id.product = elo->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; - elo->id = serio->id.id; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); switch (elo->id) { case 0: /* 10-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0); break; case 1: /* 6-byte protocol */ - input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); case 2: /* 4-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); break; case 3: /* 3-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 0, 255, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); break; } - elo->serio = serio; - - sprintf(elo->phys, "%s/input0", serio->phys); - - elo->dev.private = elo; - elo->dev.name = elo_name; - elo->dev.phys = elo->phys; - elo->dev.id.bustype = BUS_RS232; - elo->dev.id.vendor = SERIO_ELO; - elo->dev.id.product = elo->id; - elo->dev.id.version = 0x0100; - serio_set_drvdata(serio, elo); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(elo); - return err; - } - - input_register_device(&elo->dev); - - printk(KERN_INFO "input: %s on %s\n", elo_name, serio->phys); + if (err) + goto fail; + input_register_device(elo->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(elo); + return err; } /* diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index 53a27e43dd23..466da190ceec 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -48,14 +48,12 @@ MODULE_LICENSE("GPL"); #define GUNZE_MAX_LENGTH 10 -static char *gunze_name = "Gunze AHL-51S TouchScreen"; - /* * Per-touchscreen data. */ struct gunze { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int idx; unsigned char data[GUNZE_MAX_LENGTH]; @@ -64,7 +62,7 @@ struct gunze { static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs) { - struct input_dev *dev = &gunze->dev; + struct input_dev *dev = gunze->dev; if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { @@ -100,11 +98,13 @@ static irqreturn_t gunze_interrupt(struct serio *serio, static void gunze_disconnect(struct serio *serio) { - struct gunze* gunze = serio_get_drvdata(serio); + struct gunze *gunze = serio_get_drvdata(serio); - input_unregister_device(&gunze->dev); + input_get_device(gunze->dev); + input_unregister_device(gunze->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(gunze->dev); kfree(gunze); } @@ -117,45 +117,45 @@ static void gunze_disconnect(struct serio *serio) static int gunze_connect(struct serio *serio, struct serio_driver *drv) { struct gunze *gunze; + struct input_dev *input_dev; int err; - if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL))) - return -ENOMEM; - - memset(gunze, 0, sizeof(struct gunze)); - - init_input_dev(&gunze->dev); - gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0); - input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0); + gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gunze || !input_dev) { + err = -ENOMEM; + goto fail; + } gunze->serio = serio; - + gunze->dev = input_dev; sprintf(gunze->phys, "%s/input0", serio->phys); - gunze->dev.private = gunze; - gunze->dev.name = gunze_name; - gunze->dev.phys = gunze->phys; - gunze->dev.id.bustype = BUS_RS232; - gunze->dev.id.vendor = SERIO_GUNZE; - gunze->dev.id.product = 0x0051; - gunze->dev.id.version = 0x0100; + input_dev->private = gunze; + input_dev->name = "Gunze AHL-51S TouchScreen"; + input_dev->phys = gunze->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_GUNZE; + input_dev->id.product = 0x0051; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0); serio_set_drvdata(serio, gunze); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(gunze); - return err; - } - - input_register_device(&gunze->dev); - - printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys); + if (err) + goto fail; + input_register_device(gunze->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(gunze); + return err; } /* diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index bcfa1e36f957..a18d56bdafd9 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -39,7 +39,6 @@ #include #include #include -#include /* SA1100 serial defines */ #include @@ -93,16 +92,12 @@ MODULE_LICENSE("GPL"); #define H3600_SCANCODE_LEFT 8 /* 8 -> left */ #define H3600_SCANCODE_DOWN 9 /* 9 -> down */ -static char *h3600_name = "H3600 TouchScreen"; - /* * Per-touchscreen data. */ struct h3600_dev { - struct input_dev dev; - struct pm_dev *pm_dev; + struct input_dev *dev; struct serio *serio; - struct pm_dev *pm_dev; unsigned char event; /* event ID from packet */ unsigned char chksum; unsigned char len; @@ -163,33 +158,6 @@ unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr) return 0; } -static int suspended = 0; -static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req, - void *data) -{ - struct input_dev *dev = (struct input_dev *) data; - - switch (req) { - case PM_SUSPEND: /* enter D1-D3 */ - suspended = 1; - h3600_flite_power(dev, FLITE_PWR_OFF); - break; - case PM_BLANK: - if (!suspended) - h3600_flite_power(dev, FLITE_PWR_OFF); - break; - case PM_RESUME: /* enter D0 */ - /* same as unblank */ - case PM_UNBLANK: - if (suspended) { - //initSerial(); - suspended = 0; - } - h3600_flite_power(dev, FLITE_PWR_ON); - break; - } - return 0; -} #endif /* @@ -199,7 +167,7 @@ static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req, */ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs) { - struct input_dev *dev = &ts->dev; + struct input_dev *dev = ts->dev; static int touched = 0; int key, down = 0; @@ -295,6 +263,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs) static int h3600ts_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { +#if 0 struct h3600_dev *ts = dev->private; switch (type) { @@ -304,6 +273,8 @@ static int h3600ts_event(struct input_dev *dev, unsigned int type, } } return -1; +#endif + return 0; } /* @@ -380,14 +351,48 @@ static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data, static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) { struct h3600_dev *ts; + struct input_dev *input_dev; int err; - if (!(ts = kmalloc(sizeof(struct h3600_dev), GFP_KERNEL))) - return -ENOMEM; + ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto fail1; + } - memset(ts, 0, sizeof(struct h3600_dev)); + ts->serio = serio; + ts->dev = input_dev; + sprintf(ts->phys, "%s/input0", serio->phys); - init_input_dev(&ts->dev); + input_dev->name = "H3600 TouchScreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_H3600; + input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */ + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = ts; + + input_dev->event = h3600ts_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR); + input_dev->ledbit[0] = BIT(LED_SLEEP); + input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0); + + set_bit(KEY_RECORD, input_dev->keybit); + set_bit(KEY_Q, input_dev->keybit); + set_bit(KEY_PROG1, input_dev->keybit); + set_bit(KEY_PROG2, input_dev->keybit); + set_bit(KEY_PROG3, input_dev->keybit); + set_bit(KEY_UP, input_dev->keybit); + set_bit(KEY_RIGHT, input_dev->keybit); + set_bit(KEY_LEFT, input_dev->keybit); + set_bit(KEY_DOWN, input_dev->keybit); + set_bit(KEY_ENTER, input_dev->keybit); + set_bit(KEY_SUSPEND, input_dev->keybit); + set_bit(BTN_TOUCH, input_dev->keybit); /* Device specific stuff */ set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES); @@ -397,73 +402,35 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM, "h3600_action", &ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto fail2; } if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM, "h3600_suspend", &ts->dev)) { - free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev); printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto fail3; } - /* Now we have things going we setup our input device */ - ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR); - ts->dev.ledbit[0] = BIT(LED_SLEEP); - input_set_abs_params(&ts->dev, ABS_X, 60, 985, 0, 0); - input_set_abs_params(&ts->dev, ABS_Y, 35, 1024, 0, 0); - - set_bit(KEY_RECORD, ts->dev.keybit); - set_bit(KEY_Q, ts->dev.keybit); - set_bit(KEY_PROG1, ts->dev.keybit); - set_bit(KEY_PROG2, ts->dev.keybit); - set_bit(KEY_PROG3, ts->dev.keybit); - set_bit(KEY_UP, ts->dev.keybit); - set_bit(KEY_RIGHT, ts->dev.keybit); - set_bit(KEY_LEFT, ts->dev.keybit); - set_bit(KEY_DOWN, ts->dev.keybit); - set_bit(KEY_ENTER, ts->dev.keybit); - ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND); - - ts->serio = serio; - - sprintf(ts->phys, "%s/input0", serio->phys); - - ts->dev.event = h3600ts_event; - ts->dev.private = ts; - ts->dev.name = h3600_name; - ts->dev.phys = ts->phys; - ts->dev.id.bustype = BUS_RS232; - ts->dev.id.vendor = SERIO_H3600; - ts->dev.id.product = 0x0666; /* FIXME !!! We can ask the hardware */ - ts->dev.id.version = 0x0100; - serio_set_drvdata(serio, ts); err = serio_open(serio, drv); - if (err) { - free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts); - free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts); - serio_set_drvdata(serio, NULL); - kfree(ts); + if (err) return err; - } //h3600_flite_control(1, 25); /* default brightness */ -#ifdef CONFIG_PM - ts->pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT, - h3600ts_pm_callback); - printk("registered pm callback\n"); -#endif - input_register_device(&ts->dev); - - printk(KERN_INFO "input: %s on %s\n", h3600_name, serio->phys); + input_register_device(ts->dev); return 0; + +fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); +fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev); +fail1: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(ts); + return err; } /* @@ -476,9 +443,11 @@ static void h3600ts_disconnect(struct serio *serio) free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev); free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev); - input_unregister_device(&ts->dev); + input_get_device(ts->dev); + input_unregister_device(ts->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(ts->dev); kfree(ts); } diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index 7e1404441eca..957dd5a1b15e 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -21,10 +21,8 @@ static void do_softint(void *data); -static struct input_dev hp680_ts_dev; +static struct input_dev *hp680_ts_dev; static DECLARE_WORK(work, do_softint, 0); -static char *hp680_ts_name = "HP Jornada touchscreen"; -static char *hp680_ts_phys = "input0"; static void do_softint(void *data) { @@ -58,14 +56,14 @@ static void do_softint(void *data) } if (touched) { - input_report_key(&hp680_ts_dev, BTN_TOUCH, 1); - input_report_abs(&hp680_ts_dev, ABS_X, absx); - input_report_abs(&hp680_ts_dev, ABS_Y, absy); + input_report_key(hp680_ts_dev, BTN_TOUCH, 1); + input_report_abs(hp680_ts_dev, ABS_X, absx); + input_report_abs(hp680_ts_dev, ABS_Y, absy); } else { - input_report_key(&hp680_ts_dev, BTN_TOUCH, 0); + input_report_key(hp680_ts_dev, BTN_TOUCH, 0); } - input_sync(&hp680_ts_dev); + input_sync(hp680_ts_dev); enable_irq(HP680_TS_IRQ); } @@ -92,27 +90,29 @@ static int __init hp680_ts_init(void) scpcr |= SCPCR_TS_ENABLE; ctrl_outw(scpcr, SCPCR); - memset(&hp680_ts_dev, 0, sizeof(hp680_ts_dev)); - init_input_dev(&hp680_ts_dev); + hp680_ts_dev = input_allocate_device(); + if (!hp680_ts_dev) + return -ENOMEM; - hp680_ts_dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); - hp680_ts_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - hp680_ts_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + hp680_ts_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); + hp680_ts_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + hp680_ts_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - hp680_ts_dev.absmin[ABS_X] = HP680_TS_ABS_X_MIN; - hp680_ts_dev.absmin[ABS_Y] = HP680_TS_ABS_Y_MIN; - hp680_ts_dev.absmax[ABS_X] = HP680_TS_ABS_X_MAX; - hp680_ts_dev.absmax[ABS_Y] = HP680_TS_ABS_Y_MAX; + hp680_ts_dev->absmin[ABS_X] = HP680_TS_ABS_X_MIN; + hp680_ts_dev->absmin[ABS_Y] = HP680_TS_ABS_Y_MIN; + hp680_ts_dev->absmax[ABS_X] = HP680_TS_ABS_X_MAX; + hp680_ts_dev->absmax[ABS_Y] = HP680_TS_ABS_Y_MAX; - hp680_ts_dev.name = hp680_ts_name; - hp680_ts_dev.phys = hp680_ts_phys; - input_register_device(&hp680_ts_dev); + hp680_ts_dev->name = "HP Jornada touchscreen"; + hp680_ts_dev->phys = "hp680_ts/input0"; - if (request_irq - (HP680_TS_IRQ, hp680_ts_interrupt, SA_INTERRUPT, MODNAME, 0) < 0) { - printk(KERN_ERR "hp680_touchscreen.c : Can't allocate irq %d\n", + input_register_device(hp680_ts_dev); + + if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, + SA_INTERRUPT, MODNAME, 0) < 0) { + printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); - input_unregister_device(&hp680_ts_dev); + input_unregister_device(hp680_ts_dev); return -EBUSY; } @@ -124,7 +124,7 @@ static void __exit hp680_ts_exit(void) free_irq(HP680_TS_IRQ, 0); cancel_delayed_work(&work); flush_scheduled_work(); - input_unregister_device(&hp680_ts_dev); + input_unregister_device(hp680_ts_dev); } module_init(hp680_ts_init); diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index afaaebe5225b..4844d250a5eb 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -77,7 +77,7 @@ MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller"); #define MK712_READ_ONE_POINT 0x20 #define MK712_POWERUP 0x40 -static struct input_dev mk712_dev; +static struct input_dev *mk712_dev; static DEFINE_SPINLOCK(mk712_lock); static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) @@ -88,7 +88,7 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) static unsigned short last_y; spin_lock(&mk712_lock); - input_regs(&mk712_dev, regs); + input_regs(mk712_dev, regs); status = inb(mk712_io + MK712_STATUS); @@ -100,7 +100,7 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (~status & MK712_STATUS_TOUCH) { debounce = 1; - input_report_key(&mk712_dev, BTN_TOUCH, 0); + input_report_key(mk712_dev, BTN_TOUCH, 0); goto end; } @@ -110,15 +110,15 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) goto end; } - input_report_key(&mk712_dev, BTN_TOUCH, 1); - input_report_abs(&mk712_dev, ABS_X, last_x); - input_report_abs(&mk712_dev, ABS_Y, last_y); + input_report_key(mk712_dev, BTN_TOUCH, 1); + input_report_abs(mk712_dev, ABS_X, last_x); + input_report_abs(mk712_dev, ABS_Y, last_y); end: last_x = inw(mk712_io + MK712_X) & 0x0fff; last_y = inw(mk712_io + MK712_Y) & 0x0fff; - input_sync(&mk712_dev); + input_sync(mk712_dev); spin_unlock(&mk712_lock); return IRQ_HANDLED; } @@ -154,30 +154,11 @@ static void mk712_close(struct input_dev *dev) spin_unlock_irqrestore(&mk712_lock, flags); } -static struct input_dev mk712_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_ABS) }, - .keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) }, - .absbit = { BIT(ABS_X) | BIT(ABS_Y) }, - .open = mk712_open, - .close = mk712_close, - .name = "ICS MicroClock MK712 TouchScreen", - .phys = "isa0260/input0", - .absmin = { [ABS_X] = 0, [ABS_Y] = 0 }, - .absmax = { [ABS_X] = 0xfff, [ABS_Y] = 0xfff }, - .absfuzz = { [ABS_X] = 88, [ABS_Y] = 88 }, - .id = { - .bustype = BUS_ISA, - .vendor = 0x0005, - .product = 0x0001, - .version = 0x0100, - }, -}; - int __init mk712_init(void) { + int err; - if(!request_region(mk712_io, 8, "mk712")) - { + if (!request_region(mk712_io, 8, "mk712")) { printk(KERN_WARNING "mk712: unable to get IO region\n"); return -ENODEV; } @@ -188,28 +169,49 @@ int __init mk712_init(void) (inw(mk712_io + MK712_Y) & 0xf000) || (inw(mk712_io + MK712_STATUS) & 0xf333)) { printk(KERN_WARNING "mk712: device not present\n"); - release_region(mk712_io, 8); - return -ENODEV; + err = -ENODEV; + goto fail; } - if(request_irq(mk712_irq, mk712_interrupt, 0, "mk712", &mk712_dev)) - { - printk(KERN_WARNING "mk712: unable to get IRQ\n"); - release_region(mk712_io, 8); - return -EBUSY; + if (!(mk712_dev = input_allocate_device())) { + printk(KERN_ERR "mk712: not enough memory\n"); + err = -ENOMEM; + goto fail; } - input_register_device(&mk712_dev); + mk712_dev->name = "ICS MicroClock MK712 TouchScreen"; + mk712_dev->phys = "isa0260/input0"; + mk712_dev->id.bustype = BUS_ISA; + mk712_dev->id.vendor = 0x0005; + mk712_dev->id.product = 0x0001; + mk712_dev->id.version = 0x0100; + + mk712_dev->open = mk712_open; + mk712_dev->close = mk712_close; - printk(KERN_INFO "input: ICS MicroClock MK712 TouchScreen at %#x irq %d\n", mk712_io, mk712_irq); + mk712_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + mk712_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0); + input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0); + if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) { + printk(KERN_WARNING "mk712: unable to get IRQ\n"); + err = -EBUSY; + goto fail; + } + + input_register_device(mk712_dev); return 0; + + fail: input_free_device(mk712_dev); + release_region(mk712_io, 8); + return err; } static void __exit mk712_exit(void) { - input_unregister_device(&mk712_dev); - free_irq(mk712_irq, &mk712_dev); + input_unregister_device(mk712_dev); + free_irq(mk712_irq, mk712_dev); release_region(mk712_io, 8); } diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c index aa8ee7842179..1d0d37eeef6e 100644 --- a/drivers/input/touchscreen/mtouch.c +++ b/drivers/input/touchscreen/mtouch.c @@ -51,14 +51,12 @@ MODULE_LICENSE("GPL"); #define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3]) #define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0]) -static char *mtouch_name = "MicroTouch Serial TouchScreen"; - /* * Per-touchscreen data. */ struct mtouch { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int idx; unsigned char data[MTOUCH_MAX_LENGTH]; @@ -67,7 +65,7 @@ struct mtouch { static void mtouch_process_format_tablet(struct mtouch *mtouch, struct pt_regs *regs) { - struct input_dev *dev = &mtouch->dev; + struct input_dev *dev = mtouch->dev; if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { input_regs(dev, regs); @@ -116,9 +114,11 @@ static void mtouch_disconnect(struct serio *serio) { struct mtouch* mtouch = serio_get_drvdata(serio); - input_unregister_device(&mtouch->dev); + input_get_device(mtouch->dev); + input_unregister_device(mtouch->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(mtouch->dev); kfree(mtouch); } @@ -131,46 +131,46 @@ static void mtouch_disconnect(struct serio *serio) static int mtouch_connect(struct serio *serio, struct serio_driver *drv) { struct mtouch *mtouch; + struct input_dev *input_dev; int err; - if (!(mtouch = kmalloc(sizeof(*mtouch), GFP_KERNEL))) - return -ENOMEM; - - memset(mtouch, 0, sizeof(*mtouch)); - - init_input_dev(&mtouch->dev); - mtouch->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - mtouch->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - input_set_abs_params(&mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); - input_set_abs_params(&mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); + mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { + err = -ENOMEM; + goto fail; + } mtouch->serio = serio; - + mtouch->dev = input_dev; sprintf(mtouch->phys, "%s/input0", serio->phys); - mtouch->dev.private = mtouch; - mtouch->dev.name = mtouch_name; - mtouch->dev.phys = mtouch->phys; - mtouch->dev.id.bustype = BUS_RS232; - mtouch->dev.id.vendor = SERIO_MICROTOUCH; - mtouch->dev.id.product = 0; - mtouch->dev.id.version = 0x0100; + input_dev->private = mtouch; + input_dev->name = "MicroTouch Serial TouchScreen"; + input_dev->phys = mtouch->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MICROTOUCH; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); + input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); serio_set_drvdata(serio, mtouch); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(mtouch); - return err; - } - - input_register_device(&mtouch->dev); + if (err) + goto fail; - printk(KERN_INFO "input: %s on %s\n", mtouch->dev.name, serio->phys); + input_register_device(mtouch->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(mtouch); + return err; } /* -- cgit v1.2.3 From b416f2e452b6c0f5075145bb7301f7f3d44d8ed5 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:50 -0500 Subject: [PATCH] Input: convert sonypi to dynamic input_dev allocation Input: convert sonypi to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/char/sonypi.c | 92 +++++++++++++++++++++++++++++---------------------- 1 file changed, 53 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 36ae9ad2598c..a4873684f22c 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -424,10 +424,6 @@ static struct sonypi_eventtypes { #define SONYPI_BUF_SIZE 128 -/* The name of the devices for the input device drivers */ -#define SONYPI_JOG_INPUTNAME "Sony Vaio Jogdial" -#define SONYPI_KEY_INPUTNAME "Sony Vaio Keys" - /* Correspondance table between sonypi events and input layer events */ static struct { int sonypiev; @@ -490,8 +486,8 @@ static struct sonypi_device { struct fasync_struct *fifo_async; int open_count; int model; - struct input_dev input_jog_dev; - struct input_dev input_key_dev; + struct input_dev *input_jog_dev; + struct input_dev *input_key_dev; struct work_struct input_work; struct kfifo *input_fifo; spinlock_t input_fifo_lock; @@ -779,8 +775,8 @@ static void input_keyrelease(void *data) static void sonypi_report_input_event(u8 event) { - struct input_dev *jog_dev = &sonypi_device.input_jog_dev; - struct input_dev *key_dev = &sonypi_device.input_key_dev; + struct input_dev *jog_dev = sonypi_device.input_jog_dev; + struct input_dev *key_dev = sonypi_device.input_key_dev; struct sonypi_keypress kp = { NULL }; int i; @@ -1203,6 +1199,47 @@ static struct device_driver sonypi_driver = { .shutdown = sonypi_shutdown, }; +static int __devinit sonypi_create_input_devices(void) +{ + struct input_dev *jog_dev; + struct input_dev *key_dev; + int i; + + sonypi_device.input_jog_dev = jog_dev = input_allocate_device(); + if (!jog_dev) + return -ENOMEM; + + jog_dev->name = "Sony Vaio Jogdial"; + jog_dev->id.bustype = BUS_ISA; + jog_dev->id.vendor = PCI_VENDOR_ID_SONY; + + jog_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + jog_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_MIDDLE); + jog_dev->relbit[0] = BIT(REL_WHEEL); + + sonypi_device.input_key_dev = key_dev = input_allocate_device(); + if (!key_dev) { + input_free_device(jog_dev); + sonypi_device.input_jog_dev = NULL; + return -ENOMEM; + } + + key_dev->name = "Sony Vaio Keys"; + key_dev->id.bustype = BUS_ISA; + key_dev->id.vendor = PCI_VENDOR_ID_SONY; + + /* Initialize the Input Drivers: special keys */ + key_dev->evbit[0] = BIT(EV_KEY); + for (i = 0; sonypi_inputkeys[i].sonypiev; i++) + if (sonypi_inputkeys[i].inputev) + set_bit(sonypi_inputkeys[i].inputev, key_dev->keybit); + + input_register_device(jog_dev); + input_register_device(key_dev); + + return 0; +} + static int __devinit sonypi_probe(void) { int i, ret; @@ -1298,34 +1335,10 @@ static int __devinit sonypi_probe(void) } if (useinput) { - /* Initialize the Input Drivers: jogdial */ - int i; - sonypi_device.input_jog_dev.evbit[0] = - BIT(EV_KEY) | BIT(EV_REL); - sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] = - BIT(BTN_MIDDLE); - sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL); - sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME; - sonypi_device.input_jog_dev.id.bustype = BUS_ISA; - sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY; - - input_register_device(&sonypi_device.input_jog_dev); - printk(KERN_INFO "%s input method installed.\n", - sonypi_device.input_jog_dev.name); - - /* Initialize the Input Drivers: special keys */ - sonypi_device.input_key_dev.evbit[0] = BIT(EV_KEY); - for (i = 0; sonypi_inputkeys[i].sonypiev; i++) - if (sonypi_inputkeys[i].inputev) - set_bit(sonypi_inputkeys[i].inputev, - sonypi_device.input_key_dev.keybit); - sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME; - sonypi_device.input_key_dev.id.bustype = BUS_ISA; - sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY; - input_register_device(&sonypi_device.input_key_dev); - printk(KERN_INFO "%s input method installed.\n", - sonypi_device.input_key_dev.name); + ret = sonypi_create_input_devices(); + if (ret) + goto out_inputdevices; spin_lock_init(&sonypi_device.input_fifo_lock); sonypi_device.input_fifo = @@ -1375,8 +1388,9 @@ static int __devinit sonypi_probe(void) out_platformdev: kfifo_free(sonypi_device.input_fifo); out_infifo: - input_unregister_device(&sonypi_device.input_key_dev); - input_unregister_device(&sonypi_device.input_jog_dev); + input_unregister_device(sonypi_device.input_key_dev); + input_unregister_device(sonypi_device.input_jog_dev); +out_inputdevices: free_irq(sonypi_device.irq, sonypi_irq); out_reqirq: release_region(sonypi_device.ioport1, sonypi_device.region_size); @@ -1402,8 +1416,8 @@ static void __devexit sonypi_remove(void) platform_device_unregister(sonypi_device.pdev); if (useinput) { - input_unregister_device(&sonypi_device.input_key_dev); - input_unregister_device(&sonypi_device.input_jog_dev); + input_unregister_device(sonypi_device.input_key_dev); + input_unregister_device(sonypi_device.input_jog_dev); kfifo_free(sonypi_device.input_fifo); } -- cgit v1.2.3 From 88789672424375882166df86adde9dd77ead630e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:43 -0500 Subject: [PATCH] Input: convert onetouch to dynamic input_dev allocation Input: convert onetouch to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/onetouch.c | 99 +++++++++++++++++++++--------------------- 1 file changed, 50 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 2c9402dc702b..89401a59f952 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -5,7 +5,7 @@ * Copyright (c) 2005 Nick Sillik * * Initial work by: - * Copyright (c) 2003 Erik Thyren + * Copyright (c) 2003 Erik Thyren * * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann) * @@ -46,7 +46,7 @@ void onetouch_release_input(void *onetouch_); struct usb_onetouch { char name[128]; char phys[64]; - struct input_dev dev; /* input device interface */ + struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ struct urb *irq; /* urb for interrupt in report */ @@ -58,7 +58,7 @@ static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) { struct usb_onetouch *onetouch = urb->context; signed char *data = onetouch->data; - struct input_dev *dev = &onetouch->dev; + struct input_dev *dev = onetouch->dev; int status; switch (urb->status) { @@ -74,11 +74,9 @@ static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) } input_regs(dev, regs); - - input_report_key(&onetouch->dev, ONETOUCH_BUTTON, - data[0] & 0x02); - + input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02); input_sync(dev); + resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); if (status) @@ -113,8 +111,8 @@ int onetouch_connect_input(struct us_data *ss) struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_onetouch *onetouch; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; interface = ss->pusb_intf->cur_altsetting; @@ -122,62 +120,62 @@ int onetouch_connect_input(struct us_data *ss) return -ENODEV; endpoint = &interface->endpoint[2].desc; - if(!(endpoint->bEndpointAddress & USB_DIR_IN)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL))) - return -ENOMEM; + onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!onetouch || !input_dev) + goto fail1; onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN, SLAB_ATOMIC, &onetouch->data_dma); - if (!onetouch->data){ - kfree(onetouch); - return -ENOMEM; - } + if (!onetouch->data) + goto fail1; onetouch->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!onetouch->irq){ - kfree(onetouch); - usb_buffer_free(udev, ONETOUCH_PKT_LEN, - onetouch->data, onetouch->data_dma); - return -ENODEV; - } - + if (!onetouch->irq) + goto fail2; onetouch->udev = udev; + onetouch->dev = input_dev; - set_bit(EV_KEY, onetouch->dev.evbit); - set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit); - clear_bit(0, onetouch->dev.keybit); + if (udev->manufacturer) + strlcpy(onetouch->name, udev->manufacturer, + sizeof(onetouch->name)); + if (udev->product) { + if (udev->manufacturer) + strlcat(onetouch->name, " ", sizeof(onetouch->name)); + strlcat(onetouch->name, udev->product, sizeof(onetouch->name)); + } - onetouch->dev.private = onetouch; - onetouch->dev.open = usb_onetouch_open; - onetouch->dev.close = usb_onetouch_close; + if (!strlen(onetouch->name)) + snprintf(onetouch->name, sizeof(onetouch->name), + "Maxtor Onetouch %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); - usb_make_path(udev, path, sizeof(path)); - sprintf(onetouch->phys, "%s/input0", path); + usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys)); + strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys)); - onetouch->dev.name = onetouch->name; - onetouch->dev.phys = onetouch->phys; + input_dev->name = onetouch->name; + input_dev->phys = onetouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &udev->dev; - usb_to_input_id(udev, &onetouch->dev.id); + set_bit(EV_KEY, input_dev->evbit); + set_bit(ONETOUCH_BUTTON, input_dev->keybit); + clear_bit(0, input_dev->keybit); - onetouch->dev.dev = &udev->dev; - - if (udev->manufacturer) - strcat(onetouch->name, udev->manufacturer); - if (udev->product) - sprintf(onetouch->name, "%s %s", onetouch->name, - udev->product); - if (!strlen(onetouch->name)) - sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x", - onetouch->dev.id.vendor, onetouch->dev.id.product); + input_dev->private = onetouch; + input_dev->open = usb_onetouch_open; + input_dev->close = usb_onetouch_close; usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, (maxp > 8 ? 8 : maxp), @@ -188,10 +186,15 @@ int onetouch_connect_input(struct us_data *ss) ss->extra_destructor = onetouch_release_input; ss->extra = onetouch; - input_register_device(&onetouch->dev); - printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path); + input_register_device(onetouch->dev); return 0; + + fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN, + onetouch->data, onetouch->data_dma); + fail1: kfree(onetouch); + input_free_device(input_dev); + return -ENOMEM; } void onetouch_release_input(void *onetouch_) @@ -200,11 +203,9 @@ void onetouch_release_input(void *onetouch_) if (onetouch) { usb_kill_urb(onetouch->irq); - input_unregister_device(&onetouch->dev); + input_unregister_device(onetouch->dev); usb_free_urb(onetouch->irq); usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN, onetouch->data, onetouch->data_dma); - printk(KERN_INFO "usb-input: deregistering %s\n", - onetouch->dev.name); } } -- cgit v1.2.3 From 76b7cddfd576331761e945a508254abad11039e9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:51 -0500 Subject: [PATCH] Input: convert driver/input/misc to dynamic input_dev allocation Input: convert driver/input/misc to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/misc/m68kspkr.c | 36 ++++++++++++++++---------------- drivers/input/misc/pcspkr.c | 30 +++++++++++++-------------- drivers/input/misc/sparcspkr.c | 47 +++++++++++++++++++++--------------------- 3 files changed, 56 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/input/misc/m68kspkr.c b/drivers/input/misc/m68kspkr.c index 64abdd98d482..04489ad7702a 100644 --- a/drivers/input/misc/m68kspkr.c +++ b/drivers/input/misc/m68kspkr.c @@ -24,9 +24,7 @@ MODULE_AUTHOR("Richard Zidlicky "); MODULE_DESCRIPTION("m68k beeper driver"); MODULE_LICENSE("GPL"); -static char m68kspkr_name[] = "m68k beeper"; -static char m68kspkr_phys[] = "m68k/generic"; -static struct input_dev m68kspkr_dev; +static struct input_dev *m68kspkr_dev; static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { @@ -51,32 +49,34 @@ static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int static int __init m68kspkr_init(void) { - if (!mach_beep){ - printk("%s: no lowlevel beep support\n", m68kspkr_name); - return -1; + if (!mach_beep) { + printk(KERN_INFO "m68kspkr: no lowlevel beep support\n"); + return -ENODEV; } - m68kspkr_dev.evbit[0] = BIT(EV_SND); - m68kspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - m68kspkr_dev.event = m68kspkr_event; + m68kspkr_dev = input_allocate_device(); + if (!m68kspkr_dev) + return -ENOMEM; - m68kspkr_dev.name = m68kspkr_name; - m68kspkr_dev.phys = m68kspkr_phys; - m68kspkr_dev.id.bustype = BUS_HOST; - m68kspkr_dev.id.vendor = 0x001f; - m68kspkr_dev.id.product = 0x0001; - m68kspkr_dev.id.version = 0x0100; + m68kspkr_dev->name = "m68k beeper"; + m68kspkr_dev->phys = "m68k/generic"; + m68kspkr_dev->id.bustype = BUS_HOST; + m68kspkr_dev->id.vendor = 0x001f; + m68kspkr_dev->id.product = 0x0001; + m68kspkr_dev->id.version = 0x0100; - input_register_device(&m68kspkr_dev); + m68kspkr_dev->evbit[0] = BIT(EV_SND); + m68kspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + m68kspkr_dev->event = m68kspkr_event; - printk(KERN_INFO "input: %s\n", m68kspkr_name); + input_register_device(m68kspkr_dev); return 0; } static void __exit m68kspkr_exit(void) { - input_unregister_device(&m68kspkr_dev); + input_unregister_device(m68kspkr_dev); } module_init(m68kspkr_init); diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index 3013194f462b..e34633c37fdd 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -23,9 +23,7 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("PC Speaker beeper driver"); MODULE_LICENSE("GPL"); -static char pcspkr_name[] = "PC Speaker"; -static char pcspkr_phys[] = "isa0061/input0"; -static struct input_dev pcspkr_dev; +static struct input_dev *pcspkr_dev; static DEFINE_SPINLOCK(i8253_beep_lock); @@ -68,27 +66,29 @@ static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int c static int __init pcspkr_init(void) { - pcspkr_dev.evbit[0] = BIT(EV_SND); - pcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - pcspkr_dev.event = pcspkr_event; + pcspkr_dev = input_allocate_device(); + if (!pcspkr_dev) + return -ENOMEM; - pcspkr_dev.name = pcspkr_name; - pcspkr_dev.phys = pcspkr_phys; - pcspkr_dev.id.bustype = BUS_ISA; - pcspkr_dev.id.vendor = 0x001f; - pcspkr_dev.id.product = 0x0001; - pcspkr_dev.id.version = 0x0100; + pcspkr_dev->name = "PC Speaker"; + pcspkr_dev->name = "isa0061/input0"; + pcspkr_dev->id.bustype = BUS_ISA; + pcspkr_dev->id.vendor = 0x001f; + pcspkr_dev->id.product = 0x0001; + pcspkr_dev->id.version = 0x0100; - input_register_device(&pcspkr_dev); + pcspkr_dev->evbit[0] = BIT(EV_SND); + pcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + pcspkr_dev->event = pcspkr_event; - printk(KERN_INFO "input: %s\n", pcspkr_name); + input_register_device(pcspkr_dev); return 0; } static void __exit pcspkr_exit(void) { - input_unregister_device(&pcspkr_dev); + input_unregister_device(pcspkr_dev); /* turn off the speaker */ pcspkr_event(NULL, EV_SND, SND_BELL, 0); } diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index cdc3fb3d5f46..5778220a18d2 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -17,28 +17,24 @@ #endif MODULE_AUTHOR("David S. Miller "); -MODULE_DESCRIPTION("PC Speaker beeper driver"); +MODULE_DESCRIPTION("Sparc Speaker beeper driver"); MODULE_LICENSE("GPL"); static unsigned long beep_iobase; - -static char *sparcspkr_isa_name = "Sparc ISA Speaker"; -static char *sparcspkr_ebus_name = "Sparc EBUS Speaker"; -static char *sparcspkr_phys = "sparc/input0"; -static struct input_dev sparcspkr_dev; +static struct input_dev *sparcspkr_dev; DEFINE_SPINLOCK(beep_lock); static void __init init_sparcspkr_struct(void) { - sparcspkr_dev.evbit[0] = BIT(EV_SND); - sparcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - - sparcspkr_dev.phys = sparcspkr_phys; - sparcspkr_dev.id.bustype = BUS_ISA; - sparcspkr_dev.id.vendor = 0x001f; - sparcspkr_dev.id.product = 0x0001; - sparcspkr_dev.id.version = 0x0100; + sparcspkr_dev->evbit[0] = BIT(EV_SND); + sparcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + + sparcspkr_dev->phys = "sparc/input0"; + sparcspkr_dev->id.bustype = BUS_ISA; + sparcspkr_dev->id.vendor = 0x001f; + sparcspkr_dev->id.product = 0x0001; + sparcspkr_dev->id.version = 0x0100; } static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) @@ -84,14 +80,15 @@ static int __init init_ebus_beep(struct linux_ebus_device *edev) { beep_iobase = edev->resource[0].start; - init_sparcspkr_struct(); + sparcspkr_dev = input_allocate_device(); + if (!sparcspkr_dev) + return -ENOMEM; - sparcspkr_dev.name = sparcspkr_ebus_name; - sparcspkr_dev.event = ebus_spkr_event; + sparcspkr_dev->name = "Sparc EBUS Speaker"; + sparcspkr_dev->event = ebus_spkr_event; - input_register_device(&sparcspkr_dev); + input_register_device(sparcspkr_dev); - printk(KERN_INFO "input: %s\n", sparcspkr_ebus_name); return 0; } @@ -137,15 +134,17 @@ static int __init init_isa_beep(struct sparc_isa_device *isa_dev) { beep_iobase = isa_dev->resource.start; + sparcspkr_dev = input_allocate_device(); + if (!sparcspkr_dev) + return -ENOMEM; + init_sparcspkr_struct(); - sparcspkr_dev.name = sparcspkr_isa_name; - sparcspkr_dev.event = isa_spkr_event; - sparcspkr_dev.id.bustype = BUS_ISA; + sparcspkr_dev->name = "Sparc ISA Speaker"; + sparcspkr_dev->event = isa_spkr_event; input_register_device(&sparcspkr_dev); - printk(KERN_INFO "input: %s\n", sparcspkr_isa_name); return 0; } #endif @@ -182,7 +181,7 @@ static int __init sparcspkr_init(void) static void __exit sparcspkr_exit(void) { - input_unregister_device(&sparcspkr_dev); + input_unregister_device(sparcspkr_dev); } module_init(sparcspkr_init); -- cgit v1.2.3 From b7df3910c1298fee8ed7b9dfd2da74b85df5539c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:53 -0500 Subject: [PATCH] drivers/media: convert to dynamic input_dev allocation Input: convert drivers/media to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/media/common/ir-common.c | 1 - drivers/media/dvb/cinergyT2/cinergyT2.c | 108 ++++++++++++++++++---------- drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 50 +++++++------ drivers/media/dvb/dvb-usb/dvb-usb.h | 3 +- drivers/media/dvb/ttpci/av7110_ir.c | 37 +++++----- drivers/media/dvb/ttpci/budget-ci.c | 24 ++++--- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 51 ++++++++----- drivers/media/video/bttvp.h | 2 +- drivers/media/video/cx88/cx88-input.c | 58 ++++++++------- drivers/media/video/ir-kbd-gpio.c | 52 +++++++------- drivers/media/video/ir-kbd-i2c.c | 33 +++++---- drivers/media/video/saa7134/saa7134-input.c | 39 +++++----- drivers/media/video/saa7134/saa7134.h | 2 +- 13 files changed, 268 insertions(+), 192 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c index a0e700d7a4a4..06f4d4686a6c 100644 --- a/drivers/media/common/ir-common.c +++ b/drivers/media/common/ir-common.c @@ -252,7 +252,6 @@ void ir_input_init(struct input_dev *dev, struct ir_input_state *ir, if (ir_codes) memcpy(ir->ir_codes, ir_codes, sizeof(ir->ir_codes)); - init_input_dev(dev); dev->keycode = ir->ir_codes; dev->keycodesize = sizeof(IR_KEYTAB_TYPE); dev->keycodemax = IR_KEYTAB_SIZE; diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 6db0929ef53d..a1607e7d6d6b 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -137,7 +137,8 @@ struct cinergyt2 { struct urb *stream_urb [STREAM_URB_COUNT]; #ifdef ENABLE_RC - struct input_dev rc_input_dev; + struct input_dev *rc_input_dev; + char phys[64]; struct work_struct rc_query_work; int rc_input_event; u32 rc_last_code; @@ -683,6 +684,7 @@ static struct dvb_device cinergyt2_fe_template = { }; #ifdef ENABLE_RC + static void cinergyt2_query_rc (void *data) { struct cinergyt2 *cinergyt2 = data; @@ -703,7 +705,7 @@ static void cinergyt2_query_rc (void *data) /* stop key repeat */ if (cinergyt2->rc_input_event != KEY_MAX) { dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event); - input_report_key(&cinergyt2->rc_input_dev, + input_report_key(cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 0); cinergyt2->rc_input_event = KEY_MAX; } @@ -722,7 +724,7 @@ static void cinergyt2_query_rc (void *data) /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; - for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) { + for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) { if (rc_keys[i + 0] == rc_events[n].type && rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) { cinergyt2->rc_input_event = rc_keys[i + 2]; @@ -736,11 +738,11 @@ static void cinergyt2_query_rc (void *data) cinergyt2->rc_last_code != ~0) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); - input_report_key(&cinergyt2->rc_input_dev, + input_report_key(cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 0); } dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event); - input_report_key(&cinergyt2->rc_input_dev, + input_report_key(cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 1); cinergyt2->rc_last_code = rc_events[n].value; } @@ -752,7 +754,59 @@ out: up(&cinergyt2->sem); } -#endif + +static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) +{ + struct input_dev *input_dev; + int i; + + cinergyt2->rc_input_dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); + strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); + cinergyt2->rc_input_event = KEY_MAX; + cinergyt2->rc_last_code = ~0; + INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2); + + input_dev->name = DRIVER_NAME " remote control"; + input_dev->phys = cinergyt2->phys; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + for (i = 0; ARRAY_SIZE(rc_keys); i += 3) + set_bit(rc_keys[i + 2], input_dev->keybit); + input_dev->keycodesize = 0; + input_dev->keycodemax = 0; + + input_register_device(cinergyt2->rc_input_dev); + schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); +} + +static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) +{ + cancel_delayed_work(&cinergyt2->rc_query_work); + flush_scheduled_work(); + input_unregister_device(cinergyt2->rc_input_dev); +} + +static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) +{ + cancel_delayed_work(&cinergyt2->rc_query_work); +} + +static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) +{ + schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); +} + +#else + +static inline int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) { return 0; } +static inline void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { } +static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { } +static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { } + +#endif /* ENABLE_RC */ static void cinergyt2_query (void *data) { @@ -789,9 +843,6 @@ static int cinergyt2_probe (struct usb_interface *intf, { struct cinergyt2 *cinergyt2; int err; -#ifdef ENABLE_RC - int i; -#endif if (!(cinergyt2 = kmalloc (sizeof(struct cinergyt2), GFP_KERNEL))) { dprintk(1, "out of memory?!?\n"); @@ -846,30 +897,17 @@ static int cinergyt2_probe (struct usb_interface *intf, &cinergyt2_fe_template, cinergyt2, DVB_DEVICE_FRONTEND); -#ifdef ENABLE_RC - cinergyt2->rc_input_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - cinergyt2->rc_input_dev.keycodesize = 0; - cinergyt2->rc_input_dev.keycodemax = 0; - cinergyt2->rc_input_dev.name = DRIVER_NAME " remote control"; - - for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) - set_bit(rc_keys[i + 2], cinergyt2->rc_input_dev.keybit); - - input_register_device(&cinergyt2->rc_input_dev); - - cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + err = cinergyt2_register_rc(cinergyt2); + if (err) + goto bailout; - INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2); - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); -#endif return 0; bailout: dvb_dmxdev_release(&cinergyt2->dmxdev); dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_adapter (&cinergyt2->adapter); - cinergyt2_free_stream_urbs (cinergyt2); + dvb_unregister_adapter(&cinergyt2->adapter); + cinergyt2_free_stream_urbs(cinergyt2); kfree(cinergyt2); return -ENOMEM; } @@ -881,11 +919,7 @@ static void cinergyt2_disconnect (struct usb_interface *intf) if (down_interruptible(&cinergyt2->sem)) return; -#ifdef ENABLE_RC - cancel_delayed_work(&cinergyt2->rc_query_work); - flush_scheduled_work(); - input_unregister_device(&cinergyt2->rc_input_dev); -#endif + cinergyt2_unregister_rc(cinergyt2); cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx); dvb_net_release(&cinergyt2->dvbnet); @@ -908,9 +942,8 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state) if (state.event > PM_EVENT_ON) { struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); -#ifdef ENABLE_RC - cancel_delayed_work(&cinergyt2->rc_query_work); -#endif + + cinergyt2_suspend_rc(cinergyt2); cancel_delayed_work(&cinergyt2->query_work); if (cinergyt2->streaming) cinergyt2_stop_stream_xfer(cinergyt2); @@ -938,9 +971,8 @@ static int cinergyt2_resume (struct usb_interface *intf) schedule_delayed_work(&cinergyt2->query_work, HZ/2); } -#ifdef ENABLE_RC - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); -#endif + cinergyt2_resume_rc(cinergyt2); + up(&cinergyt2->sem); return 0; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index fc7800f1743e..e5c6d9835e06 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -39,9 +39,9 @@ static void dvb_usb_read_remote_control(void *data) d->last_event = event; case REMOTE_KEY_REPEAT: deb_rc("key repeated\n"); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 1); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, event, 1); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(d->rc_input_dev); break; default: break; @@ -53,8 +53,8 @@ static void dvb_usb_read_remote_control(void *data) deb_rc("NO KEY PRESSED\n"); if (d->last_state != REMOTE_NO_KEY_PRESSED) { deb_rc("releasing event %d\n",d->last_event); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(d->rc_input_dev); } d->last_state = REMOTE_NO_KEY_PRESSED; d->last_event = 0; @@ -63,8 +63,8 @@ static void dvb_usb_read_remote_control(void *data) deb_rc("KEY PRESSED\n"); deb_rc("pressing event %d\n",event); - input_event(&d->rc_input_dev, EV_KEY, event, 1); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, event, 1); + input_sync(d->rc_input_dev); d->last_event = event; d->last_state = REMOTE_KEY_PRESSED; @@ -73,8 +73,8 @@ static void dvb_usb_read_remote_control(void *data) deb_rc("KEY_REPEAT\n"); if (d->last_state != REMOTE_NO_KEY_PRESSED) { deb_rc("repeating event %d\n",d->last_event); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 2); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 2); + input_sync(d->rc_input_dev); d->last_state = REMOTE_KEY_REPEAT; } default: @@ -89,24 +89,30 @@ schedule: int dvb_usb_remote_init(struct dvb_usb_device *d) { int i; + if (d->props.rc_key_map == NULL || d->props.rc_query == NULL || dvb_usb_disable_rc_polling) return 0; - /* Initialise the remote-control structures.*/ - init_input_dev(&d->rc_input_dev); + usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); + strlcpy(d->rc_phys, "/ir0", sizeof(d->rc_phys)); + + d->rc_input_dev = input_allocate_device(); + if (!d->rc_input_dev) + return -ENOMEM; - d->rc_input_dev.evbit[0] = BIT(EV_KEY); - d->rc_input_dev.keycodesize = sizeof(unsigned char); - d->rc_input_dev.keycodemax = KEY_MAX; - d->rc_input_dev.name = "IR-receiver inside an USB DVB receiver"; + d->rc_input_dev->evbit[0] = BIT(EV_KEY); + d->rc_input_dev->keycodesize = sizeof(unsigned char); + d->rc_input_dev->keycodemax = KEY_MAX; + d->rc_input_dev->name = "IR-receiver inside an USB DVB receiver"; + d->rc_input_dev->phys = d->rc_phys; /* set the bits for the keys */ - deb_rc("key map size: %d\n",d->props.rc_key_map_size); + deb_rc("key map size: %d\n", d->props.rc_key_map_size); for (i = 0; i < d->props.rc_key_map_size; i++) { deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i); - set_bit(d->props.rc_key_map[i].event, d->rc_input_dev.keybit); + set_bit(d->props.rc_key_map[i].event, d->rc_input_dev->keybit); } /* Start the remote-control polling. */ @@ -114,14 +120,14 @@ int dvb_usb_remote_init(struct dvb_usb_device *d) d->props.rc_interval = 100; /* default */ /* setting these two values to non-zero, we have to manage key repeats */ - d->rc_input_dev.rep[REP_PERIOD] = d->props.rc_interval; - d->rc_input_dev.rep[REP_DELAY] = d->props.rc_interval + 150; + d->rc_input_dev->rep[REP_PERIOD] = d->props.rc_interval; + d->rc_input_dev->rep[REP_DELAY] = d->props.rc_interval + 150; - input_register_device(&d->rc_input_dev); + input_register_device(d->rc_input_dev); INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); - info("schedule remote query interval to %d msecs.",d->props.rc_interval); + info("schedule remote query interval to %d msecs.", d->props.rc_interval); schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); d->state |= DVB_USB_STATE_REMOTE; @@ -134,7 +140,7 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d) if (d->state & DVB_USB_STATE_REMOTE) { cancel_delayed_work(&d->rc_query_work); flush_scheduled_work(); - input_unregister_device(&d->rc_input_dev); + input_unregister_device(d->rc_input_dev); } d->state &= ~DVB_USB_STATE_REMOTE; return 0; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h index 0e4f1035b0dd..b4a1a98006c7 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -300,7 +300,8 @@ struct dvb_usb_device { int (*fe_init) (struct dvb_frontend *); /* remote control */ - struct input_dev rc_input_dev; + struct input_dev *rc_input_dev; + char rc_phys[64]; struct work_struct rc_query_work; u32 last_event; int last_state; diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c index 357a3728ec68..f5e59fc924af 100644 --- a/drivers/media/dvb/ttpci/av7110_ir.c +++ b/drivers/media/dvb/ttpci/av7110_ir.c @@ -15,7 +15,7 @@ static int av_cnt; static struct av7110 *av_list[4]; -static struct input_dev input_dev; +static struct input_dev *input_dev; static u16 key_map [256] = { KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, @@ -43,10 +43,10 @@ static u16 key_map [256] = { static void av7110_emit_keyup(unsigned long data) { - if (!data || !test_bit(data, input_dev.key)) + if (!data || !test_bit(data, input_dev->key)) return; - input_event(&input_dev, EV_KEY, data, !!0); + input_event(input_dev, EV_KEY, data, !!0); } @@ -112,13 +112,13 @@ static void av7110_emit_key(unsigned long parm) if (timer_pending(&keyup_timer)) { del_timer(&keyup_timer); if (keyup_timer.data != keycode || new_toggle != old_toggle) { - input_event(&input_dev, EV_KEY, keyup_timer.data, !!0); - input_event(&input_dev, EV_KEY, keycode, !0); + input_event(input_dev, EV_KEY, keyup_timer.data, !!0); + input_event(input_dev, EV_KEY, keycode, !0); } else - input_event(&input_dev, EV_KEY, keycode, 2); + input_event(input_dev, EV_KEY, keycode, 2); } else - input_event(&input_dev, EV_KEY, keycode, !0); + input_event(input_dev, EV_KEY, keycode, !0); keyup_timer.expires = jiffies + UP_TIMEOUT; keyup_timer.data = keycode; @@ -132,13 +132,13 @@ static void input_register_keys(void) { int i; - memset(input_dev.keybit, 0, sizeof(input_dev.keybit)); + memset(input_dev->keybit, 0, sizeof(input_dev->keybit)); - for (i = 0; i < sizeof(key_map) / sizeof(key_map[0]); i++) { + for (i = 0; i < ARRAY_SIZE(key_map); i++) { if (key_map[i] > KEY_MAX) key_map[i] = 0; else if (key_map[i] > KEY_RESERVED) - set_bit(key_map[i], input_dev.keybit); + set_bit(key_map[i], input_dev->keybit); } } @@ -216,12 +216,17 @@ int __init av7110_ir_init(struct av7110 *av7110) init_timer(&keyup_timer); keyup_timer.data = 0; - input_dev.name = "DVB on-card IR receiver"; - set_bit(EV_KEY, input_dev.evbit); - set_bit(EV_REP, input_dev.evbit); + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "DVB on-card IR receiver"; + + set_bit(EV_KEY, input_dev->evbit); + set_bit(EV_REP, input_dev->evbit); input_register_keys(); - input_register_device(&input_dev); - input_dev.timer.function = input_repeat_key; + input_register_device(input_dev); + input_dev->timer.function = input_repeat_key; e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL); if (e) { @@ -256,7 +261,7 @@ void __exit av7110_ir_exit(struct av7110 *av7110) if (av_cnt == 1) { del_timer_sync(&keyup_timer); remove_proc_entry("av7110_ir", NULL); - input_unregister_device(&input_dev); + input_unregister_device(input_dev); } av_cnt--; diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 2980db3ef22f..51c30ba68140 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -64,7 +64,7 @@ struct budget_ci { struct budget budget; - struct input_dev input_dev; + struct input_dev *input_dev; struct tasklet_struct msp430_irq_tasklet; struct tasklet_struct ciintf_irq_tasklet; int slot_status; @@ -145,7 +145,7 @@ static void msp430_ir_debounce(unsigned long data) static void msp430_ir_interrupt(unsigned long data) { struct budget_ci *budget_ci = (struct budget_ci *) data; - struct input_dev *dev = &budget_ci->input_dev; + struct input_dev *dev = budget_ci->input_dev; unsigned int code = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; @@ -181,25 +181,27 @@ static void msp430_ir_interrupt(unsigned long data) static int msp430_ir_init(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; + struct input_dev *input_dev; int i; - memset(&budget_ci->input_dev, 0, sizeof(struct input_dev)); + budget_ci->input_dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name); - budget_ci->input_dev.name = budget_ci->ir_dev_name; - set_bit(EV_KEY, budget_ci->input_dev.evbit); + input_dev->name = budget_ci->ir_dev_name; - for (i = 0; i < sizeof(key_map) / sizeof(*key_map); i++) + set_bit(EV_KEY, input_dev->evbit); + for (i = 0; i < ARRAY_SIZE(key_map); i++) if (key_map[i]) - set_bit(key_map[i], budget_ci->input_dev.keybit); + set_bit(key_map[i], input_dev->keybit); - input_register_device(&budget_ci->input_dev); + input_register_device(budget_ci->input_dev); - budget_ci->input_dev.timer.function = msp430_ir_debounce; + input_dev->timer.function = msp430_ir_debounce; saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06); - saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); return 0; @@ -208,7 +210,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci) static void msp430_ir_deinit(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; - struct input_dev *dev = &budget_ci->input_dev; + struct input_dev *dev = budget_ci->input_dev; saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06); saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 3d08fc83a754..832d179f26fa 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -152,7 +152,8 @@ struct ttusb_dec { struct list_head filter_info_list; spinlock_t filter_info_list_lock; - struct input_dev rc_input_dev; + struct input_dev *rc_input_dev; + char rc_phys[64]; int active; /* Loaded successfully */ }; @@ -235,9 +236,9 @@ static void ttusb_dec_handle_irq( struct urb *urb, struct pt_regs *regs) * this should/could be added later ... * for now lets report each signal as a key down and up*/ dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]); - input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],1); - input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],0); - input_sync(&dec->rc_input_dev); + input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1); + input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0); + input_sync(dec->rc_input_dev); } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -1181,29 +1182,38 @@ static void ttusb_dec_init_tasklet(struct ttusb_dec *dec) (unsigned long)dec); } -static void ttusb_init_rc( struct ttusb_dec *dec) +static int ttusb_init_rc(struct ttusb_dec *dec) { + struct input_dev *input_dev; u8 b[] = { 0x00, 0x01 }; int i; - init_input_dev(&dec->rc_input_dev); + usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys)); + strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys)); - dec->rc_input_dev.name = "ttusb_dec remote control"; - dec->rc_input_dev.evbit[0] = BIT(EV_KEY); - dec->rc_input_dev.keycodesize = sizeof(u16); - dec->rc_input_dev.keycodemax = 0x1a; - dec->rc_input_dev.keycode = rc_keys; + dec->rc_input_dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "ttusb_dec remote control"; + input_dev->phys = dec->rc_phys; + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keycodesize = sizeof(u16); + input_dev->keycodemax = 0x1a; + input_dev->keycode = rc_keys; - for (i = 0; i < sizeof(rc_keys)/sizeof(rc_keys[0]); i++) - set_bit(rc_keys[i], dec->rc_input_dev.keybit); + for (i = 0; i < ARRAY_SIZE(rc_keys); i++) + set_bit(rc_keys[i], input_dev->keybit); - input_register_device(&dec->rc_input_dev); + input_register_device(input_dev); - if(usb_submit_urb(dec->irq_urb,GFP_KERNEL)) { + if (usb_submit_urb(dec->irq_urb, GFP_KERNEL)) printk("%s: usb_submit_urb failed\n",__FUNCTION__); - } + /* enable irq pipe */ ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL); + + return 0; } static void ttusb_dec_init_v_pes(struct ttusb_dec *dec) @@ -1513,7 +1523,7 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec) * As the irq is submitted after the interface is changed, * this is the best method i figured out. * Any others?*/ - if(dec->interface == TTUSB_DEC_INTERFACE_IN) + if (dec->interface == TTUSB_DEC_INTERFACE_IN) usb_kill_urb(dec->irq_urb); usb_free_urb(dec->irq_urb); @@ -1521,7 +1531,10 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec) usb_buffer_free(dec->udev,IRQ_PACKET_SIZE, dec->irq_buffer, dec->irq_dma_handle); - input_unregister_device(&dec->rc_input_dev); + if (dec->rc_input_dev) { + input_unregister_device(dec->rc_input_dev); + dec->rc_input_dev = NULL; + } } @@ -1659,7 +1672,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_set_interface(dec, TTUSB_DEC_INTERFACE_IN); - if(enable_rc) + if (enable_rc) ttusb_init_rc(dec); return 0; diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h index 7a312f79340a..e0e7c7a84bc5 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bttvp.h @@ -240,7 +240,7 @@ struct bttv_pll_info { /* for gpio-connected remote control */ struct bttv_input { - struct input_dev dev; + struct input_dev *dev; struct ir_input_state ir; char name[32]; char phys[32]; diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index d81b21d6e05d..c27fe4c36f69 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -260,7 +260,7 @@ static IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = { struct cx88_IR { struct cx88_core *core; - struct input_dev input; + struct input_dev *input; struct ir_input_state ir; char name[32]; char phys[32]; @@ -315,23 +315,23 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) if (ir->mask_keydown) { /* bit set on keydown */ if (gpio & ir->mask_keydown) { - ir_input_keydown(&ir->input, &ir->ir, data, data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input, &ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else if (ir->mask_keyup) { /* bit cleared on keydown */ if (0 == (gpio & ir->mask_keyup)) { - ir_input_keydown(&ir->input, &ir->ir, data, data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input, &ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else { /* can't distinguish keydown/up :-/ */ - ir_input_keydown(&ir->input, &ir->ir, data, data); - ir_input_nokey(&ir->input, &ir->ir); + ir_input_keydown(ir->input, &ir->ir, data, data); + ir_input_nokey(ir->input, &ir->ir); } } @@ -357,13 +357,19 @@ static void cx88_ir_work(void *data) int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) { struct cx88_IR *ir; + struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; int ir_type = IR_TYPE_OTHER; - ir = kmalloc(sizeof(*ir), GFP_KERNEL); - if (NULL == ir) + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir, 0, sizeof(*ir)); + } + + ir->input = input_dev; /* detect & configure */ switch (core->board) { @@ -425,6 +431,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) if (NULL == ir_codes) { kfree(ir); + input_free_device(input_dev); return -ENODEV; } @@ -433,19 +440,19 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) cx88_boards[core->board].name); snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci)); - ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes); - ir->input.name = ir->name; - ir->input.phys = ir->phys; - ir->input.id.bustype = BUS_PCI; - ir->input.id.version = 1; + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->name = ir->name; + input_dev->phys = ir->phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 1; if (pci->subsystem_vendor) { - ir->input.id.vendor = pci->subsystem_vendor; - ir->input.id.product = pci->subsystem_device; + input_dev->id.vendor = pci->subsystem_vendor; + input_dev->id.product = pci->subsystem_device; } else { - ir->input.id.vendor = pci->vendor; - ir->input.id.product = pci->device; + input_dev->id.vendor = pci->vendor; + input_dev->id.product = pci->device; } - ir->input.dev = &pci->dev; + input_dev->cdev.dev = &pci->dev; /* record handles to ourself */ ir->core = core; @@ -465,8 +472,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) } /* all done */ - input_register_device(&ir->input); - printk("%s: registered IR remote control\n", core->name); + input_register_device(ir->input); return 0; } @@ -484,7 +490,7 @@ int cx88_ir_fini(struct cx88_core *core) flush_scheduled_work(); } - input_unregister_device(&ir->input); + input_unregister_device(ir->input); kfree(ir); /* done */ @@ -515,7 +521,7 @@ void cx88_ir_irq(struct cx88_core *core) if (!ir->scount) { /* nothing to sample */ if (ir->ir.keypressed && time_after(jiffies, ir->release)) - ir_input_nokey(&ir->input, &ir->ir); + ir_input_nokey(ir->input, &ir->ir); return; } @@ -557,7 +563,7 @@ void cx88_ir_irq(struct cx88_core *core) ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f); - ir_input_keydown(&ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff); + ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff); ir->release = jiffies + msecs_to_jiffies(120); break; case CX88_BOARD_HAUPPAUGE: @@ -566,7 +572,7 @@ void cx88_ir_irq(struct cx88_core *core) ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) break; - ir_input_keydown(&ir->input, &ir->ir, ircode & 0x3f, ircode); + ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode); ir->release = jiffies + msecs_to_jiffies(120); break; } diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c index cf292da8fdd5..234151e48edc 100644 --- a/drivers/media/video/ir-kbd-gpio.c +++ b/drivers/media/video/ir-kbd-gpio.c @@ -158,7 +158,7 @@ static IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { struct IR { struct bttv_sub_device *sub; - struct input_dev input; + struct input_dev *input; struct ir_input_state ir; char name[32]; char phys[32]; @@ -217,23 +217,23 @@ static void ir_handle_key(struct IR *ir) if (ir->mask_keydown) { /* bit set on keydown */ if (gpio & ir->mask_keydown) { - ir_input_keydown(&ir->input,&ir->ir,data,data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input,&ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else if (ir->mask_keyup) { /* bit cleared on keydown */ if (0 == (gpio & ir->mask_keyup)) { - ir_input_keydown(&ir->input,&ir->ir,data,data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input,&ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else { /* can't disturgissh keydown/up :-/ */ - ir_input_keydown(&ir->input,&ir->ir,data,data); - ir_input_nokey(&ir->input,&ir->ir); + ir_input_keydown(ir->input, &ir->ir, data, data); + ir_input_nokey(ir->input, &ir->ir); } } @@ -268,13 +268,17 @@ static int ir_probe(struct device *dev) { struct bttv_sub_device *sub = to_bttv_sub_dev(dev); struct IR *ir; + struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; int ir_type = IR_TYPE_OTHER; - ir = kmalloc(sizeof(*ir),GFP_KERNEL); - if (NULL == ir) + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir,0,sizeof(*ir)); + } /* detect & configure */ switch (sub->core->type) { @@ -328,6 +332,7 @@ static int ir_probe(struct device *dev) } if (NULL == ir_codes) { kfree(ir); + input_free_device(input_dev); return -ENODEV; } @@ -341,19 +346,19 @@ static int ir_probe(struct device *dev) snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(sub->core->pci)); - ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes); - ir->input.name = ir->name; - ir->input.phys = ir->phys; - ir->input.id.bustype = BUS_PCI; - ir->input.id.version = 1; + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->name = ir->name; + input_dev->phys = ir->phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 1; if (sub->core->pci->subsystem_vendor) { - ir->input.id.vendor = sub->core->pci->subsystem_vendor; - ir->input.id.product = sub->core->pci->subsystem_device; + input_dev->id.vendor = sub->core->pci->subsystem_vendor; + input_dev->id.product = sub->core->pci->subsystem_device; } else { - ir->input.id.vendor = sub->core->pci->vendor; - ir->input.id.product = sub->core->pci->device; + input_dev->id.vendor = sub->core->pci->vendor; + input_dev->id.product = sub->core->pci->device; } - ir->input.dev = &sub->core->pci->dev; + input_dev->cdev.dev = &sub->core->pci->dev; if (ir->polling) { INIT_WORK(&ir->work, ir_work, ir); @@ -364,9 +369,8 @@ static int ir_probe(struct device *dev) } /* all done */ - dev_set_drvdata(dev,ir); - input_register_device(&ir->input); - printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys); + dev_set_drvdata(dev, ir); + input_register_device(ir->input); return 0; } @@ -380,7 +384,7 @@ static int ir_remove(struct device *dev) flush_scheduled_work(); } - input_unregister_device(&ir->input); + input_unregister_device(ir->input); kfree(ir); return 0; } diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 67105b9804a2..9703d3d351f9 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -121,10 +121,9 @@ static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = { }; -struct IR; struct IR { struct i2c_client c; - struct input_dev input; + struct input_dev *input; struct ir_input_state ir; struct work_struct work; @@ -271,9 +270,9 @@ static void ir_key_poll(struct IR *ir) } if (0 == rc) { - ir_input_nokey(&ir->input,&ir->ir); + ir_input_nokey(ir->input, &ir->ir); } else { - ir_input_keydown(&ir->input,&ir->ir, ir_key, ir_raw); + ir_input_keydown(ir->input, &ir->ir, ir_key, ir_raw); } } @@ -318,11 +317,18 @@ static int ir_attach(struct i2c_adapter *adap, int addr, char *name; int ir_type; struct IR *ir; + struct input_dev *input_dev; - if (NULL == (ir = kmalloc(sizeof(struct IR),GFP_KERNEL))) + ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir,0,sizeof(*ir)); + } + ir->c = client_template; + ir->input = input_dev; i2c_set_clientdata(&ir->c, ir); ir->c.adapter = adap; @@ -375,13 +381,12 @@ static int ir_attach(struct i2c_adapter *adap, int addr, ir->c.dev.bus_id); /* init + register input device */ - ir_input_init(&ir->input,&ir->ir,ir_type,ir_codes); - ir->input.id.bustype = BUS_I2C; - ir->input.name = ir->c.name; - ir->input.phys = ir->phys; - input_register_device(&ir->input); - printk(DEVNAME ": %s detected at %s [%s]\n", - ir->input.name,ir->input.phys,adap->name); + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->id.bustype = BUS_I2C; + input_dev->name = ir->c.name; + input_dev->phys = ir->phys; + + input_register_device(ir->input); /* start polling via eventd */ INIT_WORK(&ir->work, ir_work, ir); @@ -402,7 +407,7 @@ static int ir_detach(struct i2c_client *client) flush_scheduled_work(); /* unregister devices */ - input_unregister_device(&ir->input); + input_unregister_device(ir->input); i2c_detach_client(&ir->c); /* free memory */ diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 1f456c4d76f2..242cb235cf92 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -425,9 +425,9 @@ static int build_key(struct saa7134_dev *dev) if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { - ir_input_keydown(&ir->dev,&ir->ir,data,data); + ir_input_keydown(ir->dev, &ir->ir, data, data); } else { - ir_input_nokey(&ir->dev,&ir->ir); + ir_input_nokey(ir->dev, &ir->ir); } return 0; } @@ -456,6 +456,7 @@ static void saa7134_input_timer(unsigned long data) int saa7134_input_init1(struct saa7134_dev *dev) { struct saa7134_ir *ir; + struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; u32 mask_keycode = 0; u32 mask_keydown = 0; @@ -535,10 +536,13 @@ int saa7134_input_init1(struct saa7134_dev *dev) return -ENODEV; } - ir = kmalloc(sizeof(*ir),GFP_KERNEL); - if (NULL == ir) + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir,0,sizeof(*ir)); + } /* init hardware-specific stuff */ ir->mask_keycode = mask_keycode; @@ -552,19 +556,19 @@ int saa7134_input_init1(struct saa7134_dev *dev) snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci)); - ir_input_init(&ir->dev, &ir->ir, ir_type, ir_codes); - ir->dev.name = ir->name; - ir->dev.phys = ir->phys; - ir->dev.id.bustype = BUS_PCI; - ir->dev.id.version = 1; + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->name = ir->name; + input_dev->phys = ir->phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 1; if (dev->pci->subsystem_vendor) { - ir->dev.id.vendor = dev->pci->subsystem_vendor; - ir->dev.id.product = dev->pci->subsystem_device; + input_dev->id.vendor = dev->pci->subsystem_vendor; + input_dev->id.product = dev->pci->subsystem_device; } else { - ir->dev.id.vendor = dev->pci->vendor; - ir->dev.id.product = dev->pci->device; + input_dev->id.vendor = dev->pci->vendor; + input_dev->id.product = dev->pci->device; } - ir->dev.dev = &dev->pci->dev; + input_dev->cdev.dev = &dev->pci->dev; /* all done */ dev->remote = ir; @@ -576,8 +580,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) add_timer(&ir->timer); } - input_register_device(&dev->remote->dev); - printk("%s: registered input device for IR\n",dev->name); + input_register_device(ir->dev); return 0; } @@ -586,9 +589,9 @@ void saa7134_input_fini(struct saa7134_dev *dev) if (NULL == dev->remote) return; - input_unregister_device(&dev->remote->dev); if (dev->remote->polling) del_timer_sync(&dev->remote->timer); + input_unregister_device(dev->remote->dev); kfree(dev->remote); dev->remote = NULL; } diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 3ea09142ec9c..860b89530e2a 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -351,7 +351,7 @@ struct saa7134_oss { /* IR input */ struct saa7134_ir { - struct input_dev dev; + struct input_dev *dev; struct ir_input_state ir; char name[32]; char phys[32]; -- cgit v1.2.3 From c7f7a569d9b4ea7c53ab6fcd1377895312d8372b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:41 -0500 Subject: [PATCH] Input: convert drivers/macintosh to dynamic input_dev allocation Input: convert drivers/macntosh to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/macintosh/adbhid.c | 222 +++++++++++++++++++++++--------------------- drivers/macintosh/mac_hid.c | 40 ++++---- 2 files changed, 138 insertions(+), 124 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index db654e8bd67e..cdb6d0283195 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -206,7 +206,7 @@ u8 adb_to_linux_keycodes[128] = { }; struct adbhid { - struct input_dev input; + struct input_dev *input; int id; int default_id; int original_handler_id; @@ -291,10 +291,10 @@ adbhid_input_keycode(int id, int keycode, int repeat, struct pt_regs *regs) switch (keycode) { case ADB_KEY_CAPSLOCK: /* Generate down/up events for CapsLock everytime. */ - input_regs(&ahid->input, regs); - input_report_key(&ahid->input, KEY_CAPSLOCK, 1); - input_report_key(&ahid->input, KEY_CAPSLOCK, 0); - input_sync(&ahid->input); + input_regs(ahid->input, regs); + input_report_key(ahid->input, KEY_CAPSLOCK, 1); + input_report_key(ahid->input, KEY_CAPSLOCK, 0); + input_sync(ahid->input); return; #ifdef CONFIG_PPC_PMAC case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */ @@ -347,10 +347,10 @@ adbhid_input_keycode(int id, int keycode, int repeat, struct pt_regs *regs) } if (adbhid[id]->keycode[keycode]) { - input_regs(&adbhid[id]->input, regs); - input_report_key(&adbhid[id]->input, + input_regs(adbhid[id]->input, regs); + input_report_key(adbhid[id]->input, adbhid[id]->keycode[keycode], !up_flag); - input_sync(&adbhid[id]->input); + input_sync(adbhid[id]->input); } else printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode, up_flag ? "released" : "pressed"); @@ -441,20 +441,20 @@ adbhid_mouse_input(unsigned char *data, int nb, struct pt_regs *regs, int autopo break; } - input_regs(&adbhid[id]->input, regs); + input_regs(adbhid[id]->input, regs); - input_report_key(&adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); - input_report_key(&adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD) - input_report_key(&adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); - input_report_rel(&adbhid[id]->input, REL_X, + input_report_rel(adbhid[id]->input, REL_X, ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 )); - input_report_rel(&adbhid[id]->input, REL_Y, + input_report_rel(adbhid[id]->input, REL_Y, ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 )); - input_sync(&adbhid[id]->input); + input_sync(adbhid[id]->input); } static void @@ -467,7 +467,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto return; } - input_regs(&adbhid[id]->input, regs); + input_regs(adbhid[id]->input, regs); switch (adbhid[id]->original_handler_id) { default: @@ -477,19 +477,19 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto switch (data[1] & 0x0f) { case 0x0: /* microphone */ - input_report_key(&adbhid[id]->input, KEY_SOUND, down); + input_report_key(adbhid[id]->input, KEY_SOUND, down); break; case 0x1: /* mute */ - input_report_key(&adbhid[id]->input, KEY_MUTE, down); + input_report_key(adbhid[id]->input, KEY_MUTE, down); break; case 0x2: /* volume decrease */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); break; case 0x3: /* volume increase */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); break; default: @@ -513,19 +513,19 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto switch (data[1] & 0x0f) { case 0x8: /* mute */ - input_report_key(&adbhid[id]->input, KEY_MUTE, down); + input_report_key(adbhid[id]->input, KEY_MUTE, down); break; case 0x7: /* volume decrease */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); break; case 0x6: /* volume increase */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); break; case 0xb: /* eject */ - input_report_key(&adbhid[id]->input, KEY_EJECTCD, down); + input_report_key(adbhid[id]->input, KEY_EJECTCD, down); break; case 0xa: /* brightness decrease */ @@ -539,7 +539,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto } } #endif /* CONFIG_PMAC_BACKLIGHT */ - input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); + input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); break; case 0x9: /* brightness increase */ @@ -553,19 +553,19 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto } } #endif /* CONFIG_PMAC_BACKLIGHT */ - input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSUP, down); + input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); break; case 0xc: /* videomode switch */ - input_report_key(&adbhid[id]->input, KEY_SWITCHVIDEOMODE, down); + input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down); break; case 0xd: /* keyboard illumination toggle */ - input_report_key(&adbhid[id]->input, KEY_KBDILLUMTOGGLE, down); + input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down); break; case 0xe: /* keyboard illumination decrease */ - input_report_key(&adbhid[id]->input, KEY_KBDILLUMDOWN, down); + input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down); break; case 0xf: @@ -573,7 +573,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0x8f: case 0x0f: /* keyboard illumination increase */ - input_report_key(&adbhid[id]->input, KEY_KBDILLUMUP, down); + input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down); break; case 0x7f: @@ -596,7 +596,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto break; } - input_sync(&adbhid[id]->input); + input_sync(adbhid[id]->input); } static struct adb_request led_request; @@ -683,7 +683,7 @@ adb_message_handler(struct notifier_block *this, unsigned long code, void *x) int i; for (i = 1; i < 16; i++) { if (adbhid[i]) - del_timer_sync(&adbhid[i]->input.timer); + del_timer_sync(&adbhid[i]->input->timer); } } @@ -699,153 +699,163 @@ adb_message_handler(struct notifier_block *this, unsigned long code, void *x) return NOTIFY_DONE; } -static void +static int adbhid_input_register(int id, int default_id, int original_handler_id, int current_handler_id, int mouse_kind) { + struct adbhid *hid; + struct input_dev *input_dev; + int err; int i; if (adbhid[id]) { printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id); - return; + return -EEXIST; } - if (!(adbhid[id] = kmalloc(sizeof(struct adbhid), GFP_KERNEL))) - return; - - memset(adbhid[id], 0, sizeof(struct adbhid)); - sprintf(adbhid[id]->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id); + adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hid || !input_dev) { + err = -ENOMEM; + goto fail; - init_input_dev(&adbhid[id]->input); + } - adbhid[id]->id = default_id; - adbhid[id]->original_handler_id = original_handler_id; - adbhid[id]->current_handler_id = current_handler_id; - adbhid[id]->mouse_kind = mouse_kind; - adbhid[id]->flags = 0; - adbhid[id]->input.private = adbhid[id]; - adbhid[id]->input.name = adbhid[id]->name; - adbhid[id]->input.phys = adbhid[id]->phys; - adbhid[id]->input.id.bustype = BUS_ADB; - adbhid[id]->input.id.vendor = 0x0001; - adbhid[id]->input.id.product = (id << 12) | (default_id << 8) | original_handler_id; - adbhid[id]->input.id.version = 0x0100; + sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id); + + hid->id = default_id; + hid->original_handler_id = original_handler_id; + hid->current_handler_id = current_handler_id; + hid->mouse_kind = mouse_kind; + hid->flags = 0; + input_dev->private = hid; + input_dev->name = hid->name; + input_dev->phys = hid->phys; + input_dev->id.bustype = BUS_ADB; + input_dev->id.vendor = 0x0001; + input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id; + input_dev->id.version = 0x0100; switch (default_id) { case ADB_KEYBOARD: - if (!(adbhid[id]->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL))) { - kfree(adbhid[id]); - return; + hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL); + if (!hid->keycode) { + err = -ENOMEM; + goto fail; } - sprintf(adbhid[id]->name, "ADB keyboard"); + sprintf(hid->name, "ADB keyboard"); - memcpy(adbhid[id]->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes)); + memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes)); printk(KERN_INFO "Detected ADB keyboard, type "); switch (original_handler_id) { default: printk(".\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_UNKNOWN; + input_dev->id.version = ADB_KEYBOARD_UNKNOWN; break; case 0x01: case 0x02: case 0x03: case 0x06: case 0x08: case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C: case 0xC0: case 0xC3: case 0xC6: printk("ANSI.\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_ANSI; + input_dev->id.version = ADB_KEYBOARD_ANSI; break; case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D: case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1: case 0xC4: case 0xC7: printk("ISO, swapping keys.\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_ISO; - i = adbhid[id]->keycode[10]; - adbhid[id]->keycode[10] = adbhid[id]->keycode[50]; - adbhid[id]->keycode[50] = i; + input_dev->id.version = ADB_KEYBOARD_ISO; + i = hid->keycode[10]; + hid->keycode[10] = hid->keycode[50]; + hid->keycode[50] = i; break; case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A: case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9: printk("JIS.\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_JIS; + input_dev->id.version = ADB_KEYBOARD_JIS; break; } for (i = 0; i < 128; i++) - if (adbhid[id]->keycode[i]) - set_bit(adbhid[id]->keycode[i], adbhid[id]->input.keybit); - - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); - adbhid[id]->input.ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML); - adbhid[id]->input.event = adbhid_kbd_event; - adbhid[id]->input.keycodemax = 127; - adbhid[id]->input.keycodesize = 1; + if (hid->keycode[i]) + set_bit(hid->keycode[i], input_dev->keybit); + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML); + input_dev->event = adbhid_kbd_event; + input_dev->keycodemax = 127; + input_dev->keycodesize = 1; break; case ADB_MOUSE: - sprintf(adbhid[id]->name, "ADB mouse"); + sprintf(hid->name, "ADB mouse"); - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - adbhid[id]->input.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - adbhid[id]->input.relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); break; case ADB_MISC: switch (original_handler_id) { case 0x02: /* Adjustable keyboard button device */ - sprintf(adbhid[id]->name, "ADB adjustable keyboard buttons"); - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - set_bit(KEY_SOUND, adbhid[id]->input.keybit); - set_bit(KEY_MUTE, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit); + sprintf(hid->name, "ADB adjustable keyboard buttons"); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + set_bit(KEY_SOUND, input_dev->keybit); + set_bit(KEY_MUTE, input_dev->keybit); + set_bit(KEY_VOLUMEUP, input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, input_dev->keybit); break; case 0x1f: /* Powerbook button device */ - sprintf(adbhid[id]->name, "ADB Powerbook buttons"); - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - set_bit(KEY_MUTE, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit); - set_bit(KEY_BRIGHTNESSUP, adbhid[id]->input.keybit); - set_bit(KEY_BRIGHTNESSDOWN, adbhid[id]->input.keybit); - set_bit(KEY_EJECTCD, adbhid[id]->input.keybit); - set_bit(KEY_SWITCHVIDEOMODE, adbhid[id]->input.keybit); - set_bit(KEY_KBDILLUMTOGGLE, adbhid[id]->input.keybit); - set_bit(KEY_KBDILLUMDOWN, adbhid[id]->input.keybit); - set_bit(KEY_KBDILLUMUP, adbhid[id]->input.keybit); + sprintf(hid->name, "ADB Powerbook buttons"); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + set_bit(KEY_MUTE, input_dev->keybit); + set_bit(KEY_VOLUMEUP, input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, input_dev->keybit); + set_bit(KEY_BRIGHTNESSUP, input_dev->keybit); + set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit); + set_bit(KEY_EJECTCD, input_dev->keybit); + set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit); + set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit); + set_bit(KEY_KBDILLUMDOWN, input_dev->keybit); + set_bit(KEY_KBDILLUMUP, input_dev->keybit); break; } - if (adbhid[id]->name[0]) + if (hid->name[0]) break; /* else fall through */ default: printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n"); - kfree(adbhid[id]); - return; + err = -ENODEV; + goto fail; } - adbhid[id]->input.keycode = adbhid[id]->keycode; - - input_register_device(&adbhid[id]->input); + input_dev->keycode = hid->keycode; - printk(KERN_INFO "input: %s on %s\n", - adbhid[id]->name, adbhid[id]->phys); + input_register_device(input_dev); if (default_id == ADB_KEYBOARD) { /* HACK WARNING!! This should go away as soon there is an utility * to control that for event devices. */ - adbhid[id]->input.rep[REP_DELAY] = 500; /* input layer default: 250 */ - adbhid[id]->input.rep[REP_PERIOD] = 66; /* input layer default: 33 */ + input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */ + input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */ } + + return 0; + + fail: input_free_device(input_dev); + kfree(hid); + adbhid[id] = NULL; + return err; } static void adbhid_input_unregister(int id) { - input_unregister_device(&adbhid[id]->input); + input_unregister_device(adbhid[id]->input); if (adbhid[id]->keycode) kfree(adbhid[id]->keycode); kfree(adbhid[id]); @@ -858,7 +868,7 @@ adbhid_input_reregister(int id, int default_id, int org_handler_id, int cur_handler_id, int mk) { if (adbhid[id]) { - if (adbhid[id]->input.id.product != + if (adbhid[id]->input->id.product != ((id << 12)|(default_id << 8)|org_handler_id)) { adbhid_input_unregister(id); adbhid_input_register(id, default_id, org_handler_id, diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index 5ad3a5a9eb7f..a66636116f0b 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -16,8 +16,8 @@ #include -static struct input_dev emumousebtn; -static void emumousebtn_input_register(void); +static struct input_dev *emumousebtn; +static int emumousebtn_input_register(void); static int mouse_emulate_buttons = 0; static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */ static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */ @@ -90,10 +90,10 @@ int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down) && (keycode == mouse_button2_keycode || keycode == mouse_button3_keycode)) { if (mouse_emulate_buttons == 1) { - input_report_key(&emumousebtn, + input_report_key(emumousebtn, keycode == mouse_button2_keycode ? BTN_MIDDLE : BTN_RIGHT, down); - input_sync(&emumousebtn); + input_sync(emumousebtn); return 1; } mouse_last_keycode = down ? keycode : 0; @@ -105,30 +105,34 @@ int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down) EXPORT_SYMBOL(mac_hid_mouse_emulate_buttons); -static void emumousebtn_input_register(void) +static int emumousebtn_input_register(void) { - emumousebtn.name = "Macintosh mouse button emulation"; + emumousebtn = input_allocate_device(); + if (!emumousebtn) + return -ENOMEM; - init_input_dev(&emumousebtn); + emumousebtn->name = "Macintosh mouse button emulation"; + emumousebtn->id.bustype = BUS_ADB; + emumousebtn->id.vendor = 0x0001; + emumousebtn->id.product = 0x0001; + emumousebtn->id.version = 0x0100; - emumousebtn.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - emumousebtn.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - emumousebtn.relbit[0] = BIT(REL_X) | BIT(REL_Y); + emumousebtn->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + emumousebtn->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + emumousebtn->relbit[0] = BIT(REL_X) | BIT(REL_Y); - emumousebtn.id.bustype = BUS_ADB; - emumousebtn.id.vendor = 0x0001; - emumousebtn.id.product = 0x0001; - emumousebtn.id.version = 0x0100; + input_register_device(emumousebtn); - input_register_device(&emumousebtn); - - printk(KERN_INFO "input: Macintosh mouse button emulation\n"); + return 0; } int __init mac_hid_init(void) { + int err; - emumousebtn_input_register(); + err = emumousebtn_input_register(); + if (err) + return err; #if defined(CONFIG_SYSCTL) mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir, 1); -- cgit v1.2.3 From 0259567ad60df13a55583b84d2cddb5526705907 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:42 -0500 Subject: [PATCH] Input: convert konicawc to dynamic input_dev allocation Input: convert konicawc to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/media/konicawc.c | 89 ++++++++++++++++++++++++++++++-------------- 1 file changed, 61 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c index 20ac9e1069d4..9fe2c2710d13 100644 --- a/drivers/usb/media/konicawc.c +++ b/drivers/usb/media/konicawc.c @@ -119,7 +119,7 @@ struct konicawc { int yplanesz; /* Number of bytes in the Y plane */ unsigned int buttonsts:1; #ifdef CONFIG_INPUT - struct input_dev input; + struct input_dev *input; char input_physname[64]; #endif }; @@ -218,6 +218,57 @@ static void konicawc_adjust_picture(struct uvd *uvd) konicawc_camera_on(uvd); } +#ifdef CONFIG_INPUT + +static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) +{ + struct input_dev *input_dev; + + usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); + strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); + + cam->input = input_dev = input_allocate_device(); + if (!input_dev) { + warn("Not enough memory for camera's input device\n"); + return; + } + + input_dev->name = "Konicawc snapshot button"; + input_dev->phys = cam->input_physname; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &dev->dev; + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + + input_dev->private = cam; + + input_register_device(cam->input); +} + +static void konicawc_unregister_input(struct konicawc *cam) +{ + if (cam->input) { + input_unregister_device(cam->input); + cam->input = NULL; + } +} + +static void konicawc_report_buttonstat(struct konicawc *cam) +{ + if (cam->input) { + input_report_key(cam->input, BTN_0, cam->buttonsts); + input_sync(cam->input); + } +} + +#else + +static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { } +static inline void konicawc_unregister_input(struct konicawc *cam) { } +static inline void konicawc_report_buttonstat(struct konicawc *cam) { } + +#endif /* CONFIG_INPUT */ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb) { @@ -273,10 +324,7 @@ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct ur if(button != cam->buttonsts) { DEBUG(2, "button: %sclicked", button ? "" : "un"); cam->buttonsts = button; -#ifdef CONFIG_INPUT - input_report_key(&cam->input, BTN_0, cam->buttonsts); - input_sync(&cam->input); -#endif + konicawc_report_buttonstat(cam); } if(sts == 0x01) { /* drop frame */ @@ -645,9 +693,9 @@ static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw) RingQueue_Flush(&uvd->dp); cam->lastframe = -2; if(uvd->curframe != -1) { - uvd->frame[uvd->curframe].curline = 0; - uvd->frame[uvd->curframe].seqRead_Length = 0; - uvd->frame[uvd->curframe].seqRead_Index = 0; + uvd->frame[uvd->curframe].curline = 0; + uvd->frame[uvd->curframe].seqRead_Length = 0; + uvd->frame[uvd->curframe].seqRead_Index = 0; } konicawc_start_data(uvd); @@ -718,7 +766,6 @@ static void konicawc_configure_video(struct uvd *uvd) DEBUG(1, "setting initial values"); } - static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid) { struct usb_device *dev = interface_to_usbdev(intf); @@ -839,21 +886,8 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id err("usbvideo_RegisterVideoDevice() failed."); uvd = NULL; } -#ifdef CONFIG_INPUT - /* Register input device for button */ - memset(&cam->input, 0, sizeof(struct input_dev)); - cam->input.name = "Konicawc snapshot button"; - cam->input.private = cam; - cam->input.evbit[0] = BIT(EV_KEY); - cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0); - usb_to_input_id(dev, &cam->input.id); - input_register_device(&cam->input); - - usb_make_path(dev, cam->input_physname, 56); - strcat(cam->input_physname, "/input0"); - cam->input.phys = cam->input_physname; - info("konicawc: %s on %s\n", cam->input.name, cam->input.phys); -#endif + + konicawc_register_input(cam, dev); } if (uvd) { @@ -869,10 +903,9 @@ static void konicawc_free_uvd(struct uvd *uvd) int i; struct konicawc *cam = (struct konicawc *)uvd->user_data; -#ifdef CONFIG_INPUT - input_unregister_device(&cam->input); -#endif - for (i=0; i < USBVIDEO_NUMSBUF; i++) { + konicawc_unregister_input(cam); + + for (i = 0; i < USBVIDEO_NUMSBUF; i++) { usb_free_urb(cam->sts_urb[i]); cam->sts_urb[i] = NULL; } -- cgit v1.2.3 From 17dd3f0f7aa729a042af5d3318ff9b3e7781b45b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:52 -0500 Subject: [PATCH] drivers/input/joystick: convert to dynamic input_dev allocation Input: convert drivers/input/joystick to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/joystick/adi.c | 93 +++--- drivers/input/joystick/amijoy.c | 85 +++--- drivers/input/joystick/analog.c | 96 +++--- drivers/input/joystick/cobra.c | 66 +++-- drivers/input/joystick/db9.c | 292 ++++++++++-------- drivers/input/joystick/gamecon.c | 396 ++++++++++++++----------- drivers/input/joystick/gf2k.c | 69 +++-- drivers/input/joystick/grip.c | 77 ++--- drivers/input/joystick/grip_mp.c | 149 ++++++---- drivers/input/joystick/guillemot.c | 51 ++-- drivers/input/joystick/iforce/iforce-main.c | 106 ++++--- drivers/input/joystick/iforce/iforce-packets.c | 5 +- drivers/input/joystick/iforce/iforce-serio.c | 10 +- drivers/input/joystick/iforce/iforce-usb.c | 22 +- drivers/input/joystick/iforce/iforce.h | 2 +- drivers/input/joystick/interact.c | 53 ++-- drivers/input/joystick/magellan.c | 71 +++-- drivers/input/joystick/sidewinder.c | 70 +++-- drivers/input/joystick/spaceball.c | 82 +++-- drivers/input/joystick/spaceorb.c | 78 +++-- drivers/input/joystick/stinger.c | 75 +++-- drivers/input/joystick/tmdc.c | 324 +++++++++++--------- drivers/input/joystick/turbografx.c | 215 ++++++++------ drivers/input/joystick/twidjoy.c | 120 ++++---- drivers/input/joystick/warrior.c | 83 +++--- 25 files changed, 1460 insertions(+), 1230 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index cf35ae638a0d..9d95459f4bcb 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); #define ADI_MIN_LENGTH 8 #define ADI_MIN_LEN_LENGTH 10 #define ADI_MIN_ID_LENGTH 66 -#define ADI_MAX_NAME_LENGTH 48 +#define ADI_MAX_NAME_LENGTH 64 #define ADI_MAX_CNAME_LENGTH 16 #define ADI_MAX_PHYS_LENGTH 64 @@ -106,7 +106,7 @@ static struct { */ struct adi { - struct input_dev dev; + struct input_dev *dev; int length; int ret; int idx; @@ -215,7 +215,7 @@ static inline int adi_get_bits(struct adi *adi, int count) static int adi_decode(struct adi *adi) { - struct input_dev *dev = &adi->dev; + struct input_dev *dev = adi->dev; char *abs = adi->abs; short *key = adi->key; int i, t; @@ -318,7 +318,8 @@ static void adi_init_digital(struct gameport *gameport) for (i = 0; seq[i]; i++) { gameport_trigger(gameport); - if (seq[i] > 0) msleep(seq[i]); + if (seq[i] > 0) + msleep(seq[i]); if (seq[i] < 0) { mdelay(-seq[i]); udelay(-seq[i]*14); /* It looks like mdelay() is off by approx 1.4% */ @@ -397,42 +398,46 @@ static void adi_id_decode(struct adi *adi, struct adi_port *port) } } -static void adi_init_input(struct adi *adi, struct adi_port *port, int half) +static int adi_init_input(struct adi *adi, struct adi_port *port, int half) { - int i, t; + struct input_dev *input_dev; char buf[ADI_MAX_NAME_LENGTH]; + int i, t; - if (!adi->length) return; - - init_input_dev(&adi->dev); + adi->dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; t = adi->id < ADI_ID_MAX ? adi->id : ADI_ID_MAX; snprintf(buf, ADI_MAX_PHYS_LENGTH, adi_names[t], adi->id); - snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s", buf); + snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s [%s]", buf, adi->cname); snprintf(adi->phys, ADI_MAX_PHYS_LENGTH, "%s/input%d", port->gameport->phys, half); adi->abs = adi_abs[t]; adi->key = adi_key[t]; - adi->dev.open = adi_open; - adi->dev.close = adi_close; + input_dev->name = adi->name; + input_dev->phys = adi->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_LOGITECH; + input_dev->id.product = adi->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &port->gameport->dev; + input_dev->private = port; - adi->dev.name = adi->name; - adi->dev.phys = adi->phys; - adi->dev.id.bustype = BUS_GAMEPORT; - adi->dev.id.vendor = GAMEPORT_ID_VENDOR_LOGITECH; - adi->dev.id.product = adi->id; - adi->dev.id.version = 0x0100; + input_dev->open = adi_open; + input_dev->close = adi_close; - adi->dev.private = port; - adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) - set_bit(adi->abs[i], adi->dev.absbit); + set_bit(adi->abs[i], input_dev->absbit); for (i = 0; i < adi->buttons; i++) - set_bit(adi->key[i], adi->dev.keybit); + set_bit(adi->key[i], input_dev->keybit); + + return 0; } static void adi_init_center(struct adi *adi) @@ -445,17 +450,17 @@ static void adi_init_center(struct adi *adi) for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) { t = adi->abs[i]; - x = adi->dev.abs[t]; + x = adi->dev->abs[t]; if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE) x = i < adi->axes10 ? 512 : 128; if (i < adi->axes10) - input_set_abs_params(&adi->dev, t, 64, x * 2 - 64, 2, 16); + input_set_abs_params(adi->dev, t, 64, x * 2 - 64, 2, 16); else if (i < adi->axes10 + adi->axes8) - input_set_abs_params(&adi->dev, t, 48, x * 2 - 48, 1, 16); + input_set_abs_params(adi->dev, t, 48, x * 2 - 48, 1, 16); else - input_set_abs_params(&adi->dev, t, -1, 1, 0, 0); + input_set_abs_params(adi->dev, t, -1, 1, 0, 0); } } @@ -469,7 +474,8 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) int i; int err; - if (!(port = kzalloc(sizeof(struct adi_port), GFP_KERNEL))) + port = kzalloc(sizeof(struct adi_port), GFP_KERNEL); + if (!port) return -ENOMEM; port->gameport = gameport; @@ -477,10 +483,8 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_drvdata(gameport, port); err = gameport_open(gameport, drv, GAMEPORT_MODE_RAW); - if (err) { - kfree(port); - return err; - } + if (err) + goto fail1; adi_init_digital(gameport); adi_read_packet(port); @@ -490,13 +494,18 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < 2; i++) { adi_id_decode(port->adi + i, port); - adi_init_input(port->adi + i, port, i); + + if (!port->adi[i].length) + continue; + + err = adi_init_input(port->adi + i, port, i); + if (err) + goto fail2; } if (!port->adi[0].length && !port->adi[1].length) { - gameport_close(gameport); - kfree(port); - return -ENODEV; + err = -ENODEV; + goto fail2; } gameport_set_poll_handler(gameport, adi_poll); @@ -511,12 +520,18 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < 2; i++) if (port->adi[i].length > 0) { adi_init_center(port->adi + i); - input_register_device(&port->adi[i].dev); - printk(KERN_INFO "input: %s [%s] on %s\n", - port->adi[i].name, port->adi[i].cname, gameport->phys); + input_register_device(port->adi[i].dev); } return 0; + + fail2: for (i = 0; i < 2; i++) + if (port->adi[i].dev) + input_free_device(port->adi[i].dev); + gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); + kfree(port); + return err; } static void adi_disconnect(struct gameport *gameport) @@ -526,7 +541,7 @@ static void adi_disconnect(struct gameport *gameport) for (i = 0; i < 2; i++) if (port->adi[i].length > 0) - input_unregister_device(&port->adi[i].dev); + input_unregister_device(port->adi[i].dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(port); diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index e996183c5b06..8558a99f6635 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -53,11 +53,9 @@ __obsolete_setup("amijoy="); static int amijoy_used; static DECLARE_MUTEX(amijoy_sem); -static struct input_dev amijoy_dev[2]; +static struct input_dev *amijoy_dev[2]; static char *amijoy_phys[2] = { "amijoy/input0", "amijoy/input1" }; -static char *amijoy_name = "Amiga joystick"; - static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp) { int i, data = 0, button = 0; @@ -70,15 +68,15 @@ static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp) case 1: data = ~custom.joy1dat; button = (~ciaa.pra >> 7) & 1; break; } - input_regs(amijoy_dev + i, fp); + input_regs(amijoy_dev[i], fp); - input_report_key(amijoy_dev + i, BTN_TRIGGER, button); + input_report_key(amijoy_dev[i], BTN_TRIGGER, button); - input_report_abs(amijoy_dev + i, ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1)); + input_report_abs(amijoy_dev[i], ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1)); data = ~(data ^ (data << 1)); - input_report_abs(amijoy_dev + i, ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1)); + input_report_abs(amijoy_dev[i], ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1)); - input_sync(amijoy_dev + i); + input_sync(amijoy_dev[i]); } return IRQ_HANDLED; } @@ -114,39 +112,52 @@ static void amijoy_close(struct input_dev *dev) static int __init amijoy_init(void) { int i, j; + int err; - for (i = 0; i < 2; i++) - if (amijoy[i]) { - if (!request_mem_region(CUSTOM_PHYSADDR+10+i*2, 2, - "amijoy [Denise]")) { - if (i == 1 && amijoy[0]) { - input_unregister_device(amijoy_dev); - release_mem_region(CUSTOM_PHYSADDR+10, 2); - } - return -EBUSY; - } + for (i = 0; i < 2; i++) { + if (!amijoy[i]) + continue; - amijoy_dev[i].open = amijoy_open; - amijoy_dev[i].close = amijoy_close; - amijoy_dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - amijoy_dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - amijoy_dev[i].keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - for (j = 0; j < 2; j++) { - amijoy_dev[i].absmin[ABS_X + j] = -1; - amijoy_dev[i].absmax[ABS_X + j] = 1; - } + amijoy_dev[i] = input_allocate_device(); + if (!amijoy_dev[i]) { + err = -ENOMEM; + goto fail; + } - amijoy_dev[i].name = amijoy_name; - amijoy_dev[i].phys = amijoy_phys[i]; - amijoy_dev[i].id.bustype = BUS_AMIGA; - amijoy_dev[i].id.vendor = 0x0001; - amijoy_dev[i].id.product = 0x0003; - amijoy_dev[i].id.version = 0x0100; + if (!request_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2, "amijoy [Denise]")) { + input_free_device(amijoy_dev[i]); + err = -EBUSY; + goto fail; + } - input_register_device(amijoy_dev + i); - printk(KERN_INFO "input: %s at joy%ddat\n", amijoy_name, i); + amijoy_dev[i]->name = "Amiga joystick"; + amijoy_dev[i]->phys = amijoy_phys[i]; + amijoy_dev[i]->id.bustype = BUS_AMIGA; + amijoy_dev[i]->id.vendor = 0x0001; + amijoy_dev[i]->id.product = 0x0003; + amijoy_dev[i]->id.version = 0x0100; + + amijoy_dev[i]->open = amijoy_open; + amijoy_dev[i]->close = amijoy_close; + + amijoy_dev[i]->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + amijoy_dev[i]->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + amijoy_dev[i]->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + for (j = 0; j < 2; j++) { + amijoy_dev[i]->absmin[ABS_X + j] = -1; + amijoy_dev[i]->absmax[ABS_X + j] = 1; } + + input_register_device(amijoy_dev[i]); + } return 0; + + fail: while (--i >= 0) + if (amijoy[i]) { + input_unregister_device(amijoy_dev[i]); + release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2); + } + return err; } static void __exit amijoy_exit(void) @@ -155,8 +166,8 @@ static void __exit amijoy_exit(void) for (i = 0; i < 2; i++) if (amijoy[i]) { - input_unregister_device(amijoy_dev + i); - release_mem_region(CUSTOM_PHYSADDR+10+i*2, 2); + input_unregister_device(amijoy_dev[i]); + release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2); } } diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 64b1313a3c66..c75ac6eb1ffb 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -111,7 +111,7 @@ static short analog_joy_btn[] = { BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN static unsigned char analog_chf[] = { 0xf, 0x0, 0x1, 0x9, 0x2, 0x4, 0xc, 0x8, 0x3, 0x5, 0xb, 0x7, 0xd, 0xe, 0xa, 0x6 }; struct analog { - struct input_dev dev; + struct input_dev *dev; int mask; short *buttons; char name[ANALOG_MAX_NAME_LENGTH]; @@ -182,7 +182,7 @@ static unsigned long analog_faketime = 0; static void analog_decode(struct analog *analog, int *axes, int *initial, int buttons) { - struct input_dev *dev = &analog->dev; + struct input_dev *dev = analog->dev; int i, j; if (analog->mask & ANALOG_HAT_FCS) @@ -428,27 +428,30 @@ static void analog_name(struct analog *analog) * analog_init_device() */ -static void analog_init_device(struct analog_port *port, struct analog *analog, int index) +static int analog_init_device(struct analog_port *port, struct analog *analog, int index) { + struct input_dev *input_dev; int i, j, t, v, w, x, y, z; analog_name(analog); sprintf(analog->phys, "%s/input%d", port->gameport->phys, index); analog->buttons = (analog->mask & ANALOG_GAMEPAD) ? analog_pad_btn : analog_joy_btn; - init_input_dev(&analog->dev); + analog->dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; - analog->dev.name = analog->name; - analog->dev.phys = analog->phys; - analog->dev.id.bustype = BUS_GAMEPORT; - analog->dev.id.vendor = GAMEPORT_ID_VENDOR_ANALOG; - analog->dev.id.product = analog->mask >> 4; - analog->dev.id.version = 0x0100; + input_dev->name = analog->name; + input_dev->phys = analog->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_ANALOG; + input_dev->id.product = analog->mask >> 4; + input_dev->id.version = 0x0100; - analog->dev.open = analog_open; - analog->dev.close = analog_close; - analog->dev.private = port; - analog->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->open = analog_open; + input_dev->close = analog_close; + input_dev->private = port; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = j = 0; i < 4; i++) if (analog->mask & (1 << i)) { @@ -461,8 +464,6 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, v = (x >> 3); w = (x >> 3); - set_bit(t, analog->dev.absbit); - if ((i == 2 || i == 3) && (j == 2 || j == 3) && (z > (y >> 3))) x = y; @@ -472,11 +473,7 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, w = (x >> 4); } - analog->dev.absmax[t] = (x << 1) - v; - analog->dev.absmin[t] = v; - analog->dev.absfuzz[t] = port->fuzz; - analog->dev.absflat[t] = w; - + input_set_abs_params(input_dev, t, v, (x << 1) - v, port->fuzz, w); j++; } @@ -484,41 +481,30 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, if (analog->mask & analog_exts[i]) for (x = 0; x < 2; x++) { t = analog_hats[j++]; - set_bit(t, analog->dev.absbit); - analog->dev.absmax[t] = 1; - analog->dev.absmin[t] = -1; + input_set_abs_params(input_dev, t, -1, 1, 0, 0); } for (i = j = 0; i < 4; i++) if (analog->mask & (0x10 << i)) - set_bit(analog->buttons[j++], analog->dev.keybit); + set_bit(analog->buttons[j++], input_dev->keybit); if (analog->mask & ANALOG_BTNS_CHF) for (i = 0; i < 2; i++) - set_bit(analog->buttons[j++], analog->dev.keybit); + set_bit(analog->buttons[j++], input_dev->keybit); if (analog->mask & ANALOG_HBTN_CHF) for (i = 0; i < 4; i++) - set_bit(analog->buttons[j++], analog->dev.keybit); + set_bit(analog->buttons[j++], input_dev->keybit); for (i = 0; i < 4; i++) if (analog->mask & (ANALOG_BTN_TL << i)) - set_bit(analog_pads[i], analog->dev.keybit); + set_bit(analog_pads[i], input_dev->keybit); analog_decode(analog, port->axes, port->initial, port->buttons); - input_register_device(&analog->dev); + input_register_device(analog->dev); - printk(KERN_INFO "input: %s at %s", analog->name, port->gameport->phys); - - if (port->cooked) - printk(" [ADC port]\n"); - else - printk(" [%s timer, %d %sHz clock, %d ns res]\n", TIME_NAME, - port->speed > 10000 ? (port->speed + 800) / 1000 : port->speed, - port->speed > 10000 ? "M" : "k", - port->speed > 10000 ? (port->loop * 1000) / (port->speed / 1000) - : (port->loop * 1000000) / port->speed); + return 0; } /* @@ -659,37 +645,41 @@ static int analog_connect(struct gameport *gameport, struct gameport_driver *drv return - ENOMEM; err = analog_init_port(gameport, drv, port); - if (err) { - kfree(port); - return err; - } + if (err) + goto fail1; err = analog_init_masks(port); - if (err) { - gameport_close(gameport); - gameport_set_drvdata(gameport, NULL); - kfree(port); - return err; - } + if (err) + goto fail2; gameport_set_poll_handler(gameport, analog_poll); gameport_set_poll_interval(gameport, 10); for (i = 0; i < 2; i++) - if (port->analog[i].mask) - analog_init_device(port, port->analog + i, i); + if (port->analog[i].mask) { + err = analog_init_device(port, port->analog + i, i); + if (err) + goto fail3; + } return 0; + + fail3: while (--i >= 0) + input_unregister_device(port->analog[i].dev); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); + kfree(port); + return err; } static void analog_disconnect(struct gameport *gameport) { - int i; struct analog_port *port = gameport_get_drvdata(gameport); + int i; for (i = 0; i < 2; i++) if (port->analog[i].mask) - input_unregister_device(&port->analog[i].dev); + input_unregister_device(port->analog[i].dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); printk(KERN_INFO "analog.c: %d out of %d reads (%d%%) on %s failed\n", diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c index 0b2e9fa26579..9a3dfc724a41 100644 --- a/drivers/input/joystick/cobra.c +++ b/drivers/input/joystick/cobra.c @@ -44,13 +44,11 @@ MODULE_LICENSE("GPL"); #define COBRA_MAX_STROBE 45 /* 45 us max wait for first strobe */ #define COBRA_LENGTH 36 -static char* cobra_name = "Creative Labs Blaster GamePad Cobra"; - static int cobra_btn[] = { BTN_START, BTN_SELECT, BTN_TL, BTN_TR, BTN_X, BTN_Y, BTN_Z, BTN_A, BTN_B, BTN_C, BTN_TL2, BTN_TR2, 0 }; struct cobra { struct gameport *gameport; - struct input_dev dev[2]; + struct input_dev *dev[2]; int reads; int bads; unsigned char exists; @@ -128,7 +126,7 @@ static void cobra_poll(struct gameport *gameport) for (i = 0; i < 2; i++) if (cobra->exists & r & (1 << i)) { - dev = cobra->dev + i; + dev = cobra->dev[i]; input_report_abs(dev, ABS_X, ((data[i] >> 4) & 1) - ((data[i] >> 3) & 1)); input_report_abs(dev, ABS_Y, ((data[i] >> 2) & 1) - ((data[i] >> 1) & 1)); @@ -159,11 +157,13 @@ static void cobra_close(struct input_dev *dev) static int cobra_connect(struct gameport *gameport, struct gameport_driver *drv) { struct cobra *cobra; + struct input_dev *input_dev; unsigned int data[2]; int i, j; int err; - if (!(cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL))) + cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL); + if (!cobra) return -ENOMEM; cobra->gameport = gameport; @@ -191,38 +191,46 @@ static int cobra_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_poll_handler(gameport, cobra_poll); gameport_set_poll_interval(gameport, 20); - for (i = 0; i < 2; i++) - if ((cobra->exists >> i) & 1) { - - sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i); + for (i = 0; i < 2; i++) { + if (~(cobra->exists >> i) & 1) + continue; - cobra->dev[i].private = cobra; - cobra->dev[i].open = cobra_open; - cobra->dev[i].close = cobra_close; + cobra->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto fail3; + } - cobra->dev[i].name = cobra_name; - cobra->dev[i].phys = cobra->phys[i]; - cobra->dev[i].id.bustype = BUS_GAMEPORT; - cobra->dev[i].id.vendor = GAMEPORT_ID_VENDOR_CREATIVE; - cobra->dev[i].id.product = 0x0008; - cobra->dev[i].id.version = 0x0100; + sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i); - cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->name = "Creative Labs Blaster GamePad Cobra"; + input_dev->phys = cobra->phys[i]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_CREATIVE; + input_dev->id.product = 0x0008; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = cobra; - input_set_abs_params(&cobra->dev[i], ABS_X, -1, 1, 0, 0); - input_set_abs_params(&cobra->dev[i], ABS_Y, -1, 1, 0, 0); + input_dev->open = cobra_open; + input_dev->close = cobra_close; - for (j = 0; cobra_btn[j]; j++) - set_bit(cobra_btn[j], cobra->dev[i].keybit); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0); + for (j = 0; cobra_btn[j]; j++) + set_bit(cobra_btn[j], input_dev->keybit); - input_register_device(&cobra->dev[i]); - printk(KERN_INFO "input: %s on %s\n", cobra_name, gameport->phys); - } + input_register_device(cobra->dev[i]); + } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: for (i = 0; i < 2; i++) + if (cobra->dev[i]) + input_unregister_device(cobra->dev[i]); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(cobra); return err; } @@ -234,7 +242,7 @@ static void cobra_disconnect(struct gameport *gameport) for (i = 0; i < 2; i++) if ((cobra->exists >> i) & 1) - input_unregister_device(cobra->dev + i); + input_unregister_device(cobra->dev[i]); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(cobra); diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index 2a3e4bb2da50..499344c72756 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -43,25 +43,28 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Atari, Amstrad, Commodore, Amiga, Sega, etc. joystick driver"); MODULE_LICENSE("GPL"); -static int db9[] __initdata = { -1, 0 }; -static int db9_nargs __initdata = 0; -module_param_array_named(dev, db9, int, &db9_nargs, 0); -MODULE_PARM_DESC(dev, "Describes first attached device (,)"); +struct db9_config { + int args[2]; + int nargs; +}; -static int db9_2[] __initdata = { -1, 0 }; -static int db9_nargs_2 __initdata = 0; -module_param_array_named(dev2, db9_2, int, &db9_nargs_2, 0); -MODULE_PARM_DESC(dev2, "Describes second attached device (,)"); +#define DB9_MAX_PORTS 3 +static struct db9_config db9[DB9_MAX_PORTS] __initdata; -static int db9_3[] __initdata = { -1, 0 }; -static int db9_nargs_3 __initdata = 0; -module_param_array_named(dev3, db9_3, int, &db9_nargs_3, 0); +module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0); +MODULE_PARM_DESC(dev, "Describes first attached device (,)"); +module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0); +MODULE_PARM_DESC(dev2, "Describes second attached device (,)"); +module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0); MODULE_PARM_DESC(dev3, "Describes third attached device (,)"); __obsolete_setup("db9="); __obsolete_setup("db9_2="); __obsolete_setup("db9_3="); +#define DB9_ARG_PARPORT 0 +#define DB9_ARG_MODE 1 + #define DB9_MULTI_STICK 0x01 #define DB9_MULTI2_STICK 0x02 #define DB9_GENESIS_PAD 0x03 @@ -87,40 +90,53 @@ __obsolete_setup("db9_3="); #define DB9_NORMAL 0x0a #define DB9_NOSELECT 0x08 -#define DB9_MAX_DEVICES 2 - #define DB9_GENESIS6_DELAY 14 #define DB9_REFRESH_TIME HZ/100 +#define DB9_MAX_DEVICES 2 + +struct db9_mode_data { + const char *name; + const short *buttons; + int n_buttons; + int n_pads; + int n_axis; + int bidirectional; + int reverse; +}; + struct db9 { - struct input_dev dev[DB9_MAX_DEVICES]; + struct input_dev *dev[DB9_MAX_DEVICES]; struct timer_list timer; struct pardevice *pd; int mode; int used; struct semaphore sem; - char phys[2][32]; + char phys[DB9_MAX_DEVICES][32]; }; static struct db9 *db9_base[3]; -static short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB }; -static short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE }; -static short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START }; - -static char db9_buttons[DB9_MAX_PAD] = { 0, 1, 2, 4, 0, 6, 8, 9, 1, 1, 7, 9, 9 }; -static short *db9_btn[DB9_MAX_PAD] = { NULL, db9_multi_btn, db9_multi_btn, db9_genesis_btn, NULL, db9_genesis_btn, - db9_genesis_btn, db9_cd32_btn, db9_multi_btn, db9_multi_btn, db9_cd32_btn, - db9_cd32_btn, db9_cd32_btn }; -static char *db9_name[DB9_MAX_PAD] = { NULL, "Multisystem joystick", "Multisystem joystick (2 fire)", "Genesis pad", - NULL, "Genesis 5 pad", "Genesis 6 pad", "Saturn pad", "Multisystem (0.8.0.2) joystick", - "Multisystem (0.8.0.2-dual) joystick", "Amiga CD-32 pad", "Saturn dpp", "Saturn dpp dual" }; - -static const int db9_max_pads[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 6, 1, 2, 1, 6, 12 }; -static const int db9_num_axis[DB9_MAX_PAD] = { 0, 2, 2, 2, 0, 2, 2, 7, 2, 2, 2 ,7, 7 }; +static const short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB }; +static const short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE }; +static const short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START }; static const short db9_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_RZ, ABS_Z, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y }; -static const int db9_bidirectional[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 0 }; -static const int db9_reverse[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0, 0 }; + +static const struct db9_mode_data db9_modes[] = { + { NULL, NULL, 0, 0, 0, 0, 0 }, + { "Multisystem joystick", db9_multi_btn, 1, 1, 2, 1, 1 }, + { "Multisystem joystick (2 fire)", db9_multi_btn, 2, 1, 2, 1, 1 }, + { "Genesis pad", db9_genesis_btn, 4, 1, 2, 1, 1 }, + { NULL, NULL, 0, 0, 0, 0, 0 }, + { "Genesis 5 pad", db9_genesis_btn, 6, 1, 2, 1, 1 }, + { "Genesis 6 pad", db9_genesis_btn, 8, 1, 2, 1, 1 }, + { "Saturn pad", db9_cd32_btn, 9, 6, 7, 0, 1 }, + { "Multisystem (0.8.0.2) joystick", db9_multi_btn, 1, 1, 2, 1, 1 }, + { "Multisystem (0.8.0.2-dual) joystick", db9_multi_btn, 1, 2, 2, 1, 1 }, + { "Amiga CD-32 pad", db9_cd32_btn, 7, 1, 2, 1, 1 }, + { "Saturn dpp", db9_cd32_btn, 9, 6, 7, 0, 0 }, + { "Saturn dpp dual", db9_cd32_btn, 9, 12, 7, 0, 0 }, +}; /* * Saturn controllers @@ -342,7 +358,7 @@ static int db9_saturn(int mode, struct parport *port, struct input_dev *dev) default: return -1; } - max_pads = min(db9_max_pads[mode], DB9_MAX_DEVICES); + max_pads = min(db9_modes[mode].n_pads, DB9_MAX_DEVICES); for (tmp = 0, i = 0; i < n; i++) { id = db9_saturn_read_packet(port, data, type + i, 1); tmp = db9_saturn_report(id, data, dev, tmp, max_pads); @@ -354,17 +370,18 @@ static void db9_timer(unsigned long private) { struct db9 *db9 = (void *) private; struct parport *port = db9->pd->port; - struct input_dev *dev = db9->dev; + struct input_dev *dev = db9->dev[0]; + struct input_dev *dev2 = db9->dev[1]; int data, i; - switch(db9->mode) { + switch (db9->mode) { case DB9_MULTI_0802_2: data = parport_read_data(port) >> 3; - input_report_abs(dev + 1, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); - input_report_abs(dev + 1, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); - input_report_key(dev + 1, BTN_TRIGGER, ~data & DB9_FIRE1); + input_report_abs(dev2, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); + input_report_abs(dev2, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); + input_report_key(dev2, BTN_TRIGGER, ~data & DB9_FIRE1); case DB9_MULTI_0802: @@ -405,7 +422,7 @@ static void db9_timer(unsigned long private) input_report_key(dev, BTN_C, ~data & DB9_FIRE2); parport_write_control(port, DB9_NORMAL); - data=parport_read_data(port); + data = parport_read_data(port); input_report_key(dev, BTN_A, ~data & DB9_FIRE1); input_report_key(dev, BTN_START, ~data & DB9_FIRE2); @@ -414,7 +431,7 @@ static void db9_timer(unsigned long private) case DB9_GENESIS5_PAD: parport_write_control(port, DB9_NOSELECT); - data=parport_read_data(port); + data = parport_read_data(port); input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); @@ -422,7 +439,7 @@ static void db9_timer(unsigned long private) input_report_key(dev, BTN_C, ~data & DB9_FIRE2); parport_write_control(port, DB9_NORMAL); - data=parport_read_data(port); + data = parport_read_data(port); input_report_key(dev, BTN_A, ~data & DB9_FIRE1); input_report_key(dev, BTN_X, ~data & DB9_FIRE2); @@ -434,7 +451,7 @@ static void db9_timer(unsigned long private) parport_write_control(port, DB9_NOSELECT); /* 1 */ udelay(DB9_GENESIS6_DELAY); - data=parport_read_data(port); + data = parport_read_data(port); input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); @@ -443,7 +460,7 @@ static void db9_timer(unsigned long private) parport_write_control(port, DB9_NORMAL); udelay(DB9_GENESIS6_DELAY); - data=parport_read_data(port); + data = parport_read_data(port); input_report_key(dev, BTN_A, ~data & DB9_FIRE1); input_report_key(dev, BTN_START, ~data & DB9_FIRE2); @@ -477,7 +494,7 @@ static void db9_timer(unsigned long private) case DB9_CD32_PAD: - data=parport_read_data(port); + data = parport_read_data(port); input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); @@ -489,7 +506,7 @@ static void db9_timer(unsigned long private) parport_write_control(port, 0x02); parport_write_control(port, 0x0a); input_report_key(dev, db9_cd32_btn[i], ~data & DB9_FIRE2); - } + } parport_write_control(port, 0x00); break; @@ -513,7 +530,7 @@ static int db9_open(struct input_dev *dev) if (!db9->used++) { parport_claim(db9->pd); parport_write_data(port, 0xff); - if (db9_reverse[db9->mode]) { + if (db9_modes[db9->mode].reverse) { parport_data_reverse(port); parport_write_control(port, DB9_NORMAL); } @@ -539,117 +556,160 @@ static void db9_close(struct input_dev *dev) up(&db9->sem); } -static struct db9 __init *db9_probe(int *config, int nargs) +static struct db9 __init *db9_probe(int parport, int mode) { struct db9 *db9; + const struct db9_mode_data *db9_mode; struct parport *pp; + struct pardevice *pd; + struct input_dev *input_dev; int i, j; + int err; - if (config[0] < 0) - return NULL; - - if (nargs < 2) { - printk(KERN_ERR "db9.c: Device type must be specified.\n"); - return NULL; + if (mode < 1 || mode >= DB9_MAX_PAD || !db9_modes[mode].n_buttons) { + printk(KERN_ERR "db9.c: Bad device type %d\n", mode); + err = -EINVAL; + goto err_out; } - if (config[1] < 1 || config[1] >= DB9_MAX_PAD || !db9_buttons[config[1]]) { - printk(KERN_ERR "db9.c: bad config\n"); - return NULL; - } + db9_mode = &db9_modes[mode]; - pp = parport_find_number(config[0]); + pp = parport_find_number(parport); if (!pp) { printk(KERN_ERR "db9.c: no such parport\n"); - return NULL; + err = -ENODEV; + goto err_out; } - if (db9_bidirectional[config[1]]) { - if (!(pp->modes & PARPORT_MODE_TRISTATE)) { - printk(KERN_ERR "db9.c: specified parport is not bidirectional\n"); - parport_put_port(pp); - return NULL; - } + if (db9_mode[mode].bidirectional && !(pp->modes & PARPORT_MODE_TRISTATE)) { + printk(KERN_ERR "db9.c: specified parport is not bidirectional\n"); + err = -EINVAL; + goto err_put_pp; + } + + pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (!pd) { + printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n"); + err = -EBUSY; + goto err_put_pp; } - if (!(db9 = kzalloc(sizeof(struct db9), GFP_KERNEL))) { - parport_put_port(pp); - return NULL; + db9 = kzalloc(sizeof(struct db9), GFP_KERNEL); + if (!db9) { + printk(KERN_ERR "db9.c: Not enough memory\n"); + err = -ENOMEM; + goto err_unreg_pardev; } init_MUTEX(&db9->sem); - db9->mode = config[1]; + db9->pd = pd; + db9->mode = mode; init_timer(&db9->timer); db9->timer.data = (long) db9; db9->timer.function = db9_timer; - db9->pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); - parport_put_port(pp); - - if (!db9->pd) { - printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n"); - kfree(db9); - return NULL; - } + for (i = 0; i < (min(db9_mode->n_pads, DB9_MAX_DEVICES)); i++) { - for (i = 0; i < (min(db9_max_pads[db9->mode], DB9_MAX_DEVICES)); i++) { + db9->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + printk(KERN_ERR "db9.c: Not enough memory for input device\n"); + err = -ENOMEM; + goto err_free_devs; + } sprintf(db9->phys[i], "%s/input%d", db9->pd->port->name, i); - db9->dev[i].private = db9; - db9->dev[i].open = db9_open; - db9->dev[i].close = db9_close; - - db9->dev[i].name = db9_name[db9->mode]; - db9->dev[i].phys = db9->phys[i]; - db9->dev[i].id.bustype = BUS_PARPORT; - db9->dev[i].id.vendor = 0x0002; - db9->dev[i].id.product = config[1]; - db9->dev[i].id.version = 0x0100; - - db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - for (j = 0; j < db9_buttons[db9->mode]; j++) - set_bit(db9_btn[db9->mode][j], db9->dev[i].keybit); - for (j = 0; j < db9_num_axis[db9->mode]; j++) { - set_bit(db9_abs[j], db9->dev[i].absbit); - if (j < 2) { - db9->dev[i].absmin[db9_abs[j]] = -1; - db9->dev[i].absmax[db9_abs[j]] = 1; - } else { - db9->dev[i].absmin[db9_abs[j]] = 1; - db9->dev[i].absmax[db9_abs[j]] = 255; - db9->dev[i].absflat[db9_abs[j]] = 0; - } + input_dev->name = db9_mode->name; + input_dev->phys = db9->phys[i]; + input_dev->id.bustype = BUS_PARPORT; + input_dev->id.vendor = 0x0002; + input_dev->id.product = mode; + input_dev->id.version = 0x0100; + input_dev->private = db9; + + input_dev->open = db9_open; + input_dev->close = db9_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + for (j = 0; j < db9_mode->n_buttons; j++) + set_bit(db9_mode->buttons[j], input_dev->keybit); + for (j = 0; j < db9_mode->n_axis; j++) { + if (j < 2) + input_set_abs_params(input_dev, db9_abs[j], -1, 1, 0, 0); + else + input_set_abs_params(input_dev, db9_abs[j], 1, 255, 0, 0); } - input_register_device(db9->dev + i); - printk(KERN_INFO "input: %s on %s\n", db9->dev[i].name, db9->pd->port->name); + + input_register_device(input_dev); } + parport_put_port(pp); return db9; + + err_free_devs: + while (--i >= 0) + input_unregister_device(db9->dev[i]); + kfree(db9); + err_unreg_pardev: + parport_unregister_device(pd); + err_put_pp: + parport_put_port(pp); + err_out: + return ERR_PTR(err); +} + +static void __exit db9_remove(struct db9 *db9) +{ + int i; + + for (i = 0; i < min(db9_modes[db9->mode].n_pads, DB9_MAX_DEVICES); i++) + input_unregister_device(db9->dev[i]); + parport_unregister_device(db9->pd); + kfree(db9); } static int __init db9_init(void) { - db9_base[0] = db9_probe(db9, db9_nargs); - db9_base[1] = db9_probe(db9_2, db9_nargs_2); - db9_base[2] = db9_probe(db9_3, db9_nargs_3); + int i; + int have_dev = 0; + int err = 0; + + for (i = 0; i < DB9_MAX_PORTS; i++) { + if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0) + continue; + + if (db9[i].nargs < 2) { + printk(KERN_ERR "db9.c: Device type must be specified.\n"); + err = -EINVAL; + break; + } + + db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT], + db9[i].args[DB9_ARG_MODE]); + if (IS_ERR(db9_base[i])) { + err = PTR_ERR(db9_base[i]); + break; + } + + have_dev = 1; + } - if (db9_base[0] || db9_base[1] || db9_base[2]) - return 0; + if (err) { + while (--i >= 0) + db9_remove(db9_base[i]); + return err; + } - return -ENODEV; + return have_dev ? 0 : -ENODEV; } static void __exit db9_exit(void) { - int i, j; + int i; - for (i = 0; i < 3; i++) - if (db9_base[i]) { - for (j = 0; j < min(db9_max_pads[db9_base[i]->mode], DB9_MAX_DEVICES); j++) - input_unregister_device(db9_base[i]->dev + j); - parport_unregister_device(db9_base[i]->pd); - } + for (i = 0; i < DB9_MAX_PORTS; i++) + if (db9_base[i]) + db9_remove(db9_base[i]); } module_init(db9_init); diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index 5427bf9fc862..7df2d82f2c83 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -41,20 +41,22 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver"); MODULE_LICENSE("GPL"); -static int gc[] __initdata = { -1, 0, 0, 0, 0, 0 }; -static int gc_nargs __initdata = 0; -module_param_array_named(map, gc, int, &gc_nargs, 0); -MODULE_PARM_DESC(map, "Describers first set of devices (,,,..)"); +#define GC_MAX_PORTS 3 +#define GC_MAX_DEVICES 5 -static int gc_2[] __initdata = { -1, 0, 0, 0, 0, 0 }; -static int gc_nargs_2 __initdata = 0; -module_param_array_named(map2, gc_2, int, &gc_nargs_2, 0); -MODULE_PARM_DESC(map2, "Describers second set of devices"); +struct gc_config { + int args[GC_MAX_DEVICES + 1]; + int nargs; +}; + +static struct gc_config gc[GC_MAX_PORTS] __initdata; -static int gc_3[] __initdata = { -1, 0, 0, 0, 0, 0 }; -static int gc_nargs_3 __initdata = 0; -module_param_array_named(map3, gc_3, int, &gc_nargs_3, 0); -MODULE_PARM_DESC(map3, "Describers third set of devices"); +module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0); +MODULE_PARM_DESC(map, "Describes first set of devices (,,,..)"); +module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0); +MODULE_PARM_DESC(map2, "Describes second set of devices"); +module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0); +MODULE_PARM_DESC(map3, "Describes third set of devices"); __obsolete_setup("gc="); __obsolete_setup("gc_2="); @@ -77,12 +79,12 @@ __obsolete_setup("gc_3="); struct gc { struct pardevice *pd; - struct input_dev dev[5]; + struct input_dev *dev[GC_MAX_DEVICES]; struct timer_list timer; unsigned char pads[GC_MAX + 1]; int used; struct semaphore sem; - char phys[5][32]; + char phys[GC_MAX_DEVICES][32]; }; static struct gc *gc_base[3]; @@ -330,7 +332,6 @@ static void gc_psx_read_packet(struct gc *gc, unsigned char data[5][GC_PSX_BYTES static void gc_timer(unsigned long private) { struct gc *gc = (void *) private; - struct input_dev *dev = gc->dev; unsigned char data[GC_MAX_LENGTH]; unsigned char data_psx[5][GC_PSX_BYTES]; int i, j, s; @@ -357,16 +358,16 @@ static void gc_timer(unsigned long private) if (data[31 - j] & s) axes[1] |= 1 << j; } - input_report_abs(dev + i, ABS_X, axes[0]); - input_report_abs(dev + i, ABS_Y, -axes[1]); + input_report_abs(gc->dev[i], ABS_X, axes[0]); + input_report_abs(gc->dev[i], ABS_Y, -axes[1]); - input_report_abs(dev + i, ABS_HAT0X, !(s & data[6]) - !(s & data[7])); - input_report_abs(dev + i, ABS_HAT0Y, !(s & data[4]) - !(s & data[5])); + input_report_abs(gc->dev[i], ABS_HAT0X, !(s & data[6]) - !(s & data[7])); + input_report_abs(gc->dev[i], ABS_HAT0Y, !(s & data[4]) - !(s & data[5])); for (j = 0; j < 10; j++) - input_report_key(dev + i, gc_n64_btn[j], s & data[gc_n64_bytes[j]]); + input_report_key(gc->dev[i], gc_n64_btn[j], s & data[gc_n64_bytes[j]]); - input_sync(dev + i); + input_sync(gc->dev[i]); } } } @@ -384,19 +385,19 @@ static void gc_timer(unsigned long private) s = gc_status_bit[i]; if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) { - input_report_abs(dev + i, ABS_X, !(s & data[6]) - !(s & data[7])); - input_report_abs(dev + i, ABS_Y, !(s & data[4]) - !(s & data[5])); + input_report_abs(gc->dev[i], ABS_X, !(s & data[6]) - !(s & data[7])); + input_report_abs(gc->dev[i], ABS_Y, !(s & data[4]) - !(s & data[5])); } if (s & gc->pads[GC_NES]) for (j = 0; j < 4; j++) - input_report_key(dev + i, gc_snes_btn[j], s & data[gc_nes_bytes[j]]); + input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_nes_bytes[j]]); if (s & gc->pads[GC_SNES]) for (j = 0; j < 8; j++) - input_report_key(dev + i, gc_snes_btn[j], s & data[gc_snes_bytes[j]]); + input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_snes_bytes[j]]); - input_sync(dev + i); + input_sync(gc->dev[i]); } } @@ -413,15 +414,15 @@ static void gc_timer(unsigned long private) s = gc_status_bit[i]; if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) { - input_report_abs(dev + i, ABS_X, !(s & data[2]) - !(s & data[3])); - input_report_abs(dev + i, ABS_Y, !(s & data[0]) - !(s & data[1])); - input_report_key(dev + i, BTN_TRIGGER, s & data[4]); + input_report_abs(gc->dev[i], ABS_X, !(s & data[2]) - !(s & data[3])); + input_report_abs(gc->dev[i], ABS_Y, !(s & data[0]) - !(s & data[1])); + input_report_key(gc->dev[i], BTN_TRIGGER, s & data[4]); } if (s & gc->pads[GC_MULTI2]) - input_report_key(dev + i, BTN_THUMB, s & data[5]); + input_report_key(gc->dev[i], BTN_THUMB, s & data[5]); - input_sync(dev + i); + input_sync(gc->dev[i]); } } @@ -438,44 +439,44 @@ static void gc_timer(unsigned long private) case GC_PSX_RUMBLE: - input_report_key(dev + i, BTN_THUMBL, ~data_psx[i][0] & 0x04); - input_report_key(dev + i, BTN_THUMBR, ~data_psx[i][0] & 0x02); + input_report_key(gc->dev[i], BTN_THUMBL, ~data_psx[i][0] & 0x04); + input_report_key(gc->dev[i], BTN_THUMBR, ~data_psx[i][0] & 0x02); case GC_PSX_NEGCON: case GC_PSX_ANALOG: - if(gc->pads[GC_DDR] & gc_status_bit[i]) { + if (gc->pads[GC_DDR] & gc_status_bit[i]) { for(j = 0; j < 4; j++) - input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); + input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); } else { for (j = 0; j < 4; j++) - input_report_abs(dev + i, gc_psx_abs[j+2], data_psx[i][j + 2]); + input_report_abs(gc->dev[i], gc_psx_abs[j+2], data_psx[i][j + 2]); - input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); - input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); + input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); + input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); } for (j = 0; j < 8; j++) - input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); + input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); - input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08); - input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01); + input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08); + input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01); - input_sync(dev + i); + input_sync(gc->dev[i]); break; case GC_PSX_NORMAL: - if(gc->pads[GC_DDR] & gc_status_bit[i]) { + if (gc->pads[GC_DDR] & gc_status_bit[i]) { for(j = 0; j < 4; j++) - input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); + input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); } else { - input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); - input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); + input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); + input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); /* for some reason if the extra axes are left unset they drift */ /* for (j = 0; j < 4; j++) - input_report_abs(dev + i, gc_psx_abs[j+2], 128); + input_report_abs(gc->dev[i], gc_psx_abs[j+2], 128); * This needs to be debugged properly, * maybe fuzz processing needs to be done in input_sync() * --vojtech @@ -483,12 +484,12 @@ static void gc_timer(unsigned long private) } for (j = 0; j < 8; j++) - input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); + input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); - input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08); - input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01); + input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08); + input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01); - input_sync(dev + i); + input_sync(gc->dev[i]); break; @@ -533,177 +534,212 @@ static void gc_close(struct input_dev *dev) up(&gc->sem); } -static struct gc __init *gc_probe(int *config, int nargs) +static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type) { - struct gc *gc; - struct parport *pp; - int i, j; + struct input_dev *input_dev; + int i; - if (config[0] < 0) - return NULL; + if (!pad_type) + return 0; - if (nargs < 2) { - printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); - return NULL; + if (pad_type < 1 || pad_type > GC_MAX) { + printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type); + return -EINVAL; } - pp = parport_find_number(config[0]); - - if (!pp) { - printk(KERN_ERR "gamecon.c: no such parport\n"); - return NULL; + gc->dev[idx] = input_dev = input_allocate_device(); + if (!input_dev) { + printk(KERN_ERR "gamecon.c: Not enough memory for input device\n"); + return -ENOMEM; } - if (!(gc = kzalloc(sizeof(struct gc), GFP_KERNEL))) { - parport_put_port(pp); - return NULL; + input_dev->name = gc_names[pad_type]; + input_dev->phys = gc->phys[idx]; + input_dev->id.bustype = BUS_PARPORT; + input_dev->id.vendor = 0x0001; + input_dev->id.product = pad_type; + input_dev->id.version = 0x0100; + input_dev->private = gc; + + input_dev->open = gc_open; + input_dev->close = gc_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + + for (i = 0; i < 2; i++) + input_set_abs_params(input_dev, ABS_X + i, -1, 1, 0, 0); + + gc->pads[0] |= gc_status_bit[idx]; + gc->pads[pad_type] |= gc_status_bit[idx]; + + switch (pad_type) { + + case GC_N64: + for (i = 0; i < 10; i++) + set_bit(gc_n64_btn[i], input_dev->keybit); + + for (i = 0; i < 2; i++) { + input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2); + input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); + } + + break; + + case GC_SNES: + for (i = 4; i < 8; i++) + set_bit(gc_snes_btn[i], input_dev->keybit); + case GC_NES: + for (i = 0; i < 4; i++) + set_bit(gc_snes_btn[i], input_dev->keybit); + break; + + case GC_MULTI2: + set_bit(BTN_THUMB, input_dev->keybit); + case GC_MULTI: + set_bit(BTN_TRIGGER, input_dev->keybit); + break; + + case GC_PSX: + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2); + for (i = 0; i < 12; i++) + set_bit(gc_psx_btn[i], input_dev->keybit); + + break; + + case GC_DDR: + for (i = 0; i < 4; i++) + set_bit(gc_psx_ddr_btn[i], input_dev->keybit); + for (i = 0; i < 12; i++) + set_bit(gc_psx_btn[i], input_dev->keybit); + + break; } - init_MUTEX(&gc->sem); + return 0; +} - gc->pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); +static struct gc __init *gc_probe(int parport, int *pads, int n_pads) +{ + struct gc *gc; + struct parport *pp; + struct pardevice *pd; + int i; + int err; - parport_put_port(pp); + pp = parport_find_number(parport); + if (!pp) { + printk(KERN_ERR "gamecon.c: no such parport\n"); + err = -EINVAL; + goto err_out; + } - if (!gc->pd) { + pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (!pd) { printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n"); - kfree(gc); - return NULL; + err = -EBUSY; + goto err_put_pp; } - parport_claim(gc->pd); + gc = kzalloc(sizeof(struct gc), GFP_KERNEL); + if (!gc) { + printk(KERN_ERR "gamecon.c: Not enough memory\n"); + err = -ENOMEM; + goto err_unreg_pardev; + } + init_MUTEX(&gc->sem); + gc->pd = pd; init_timer(&gc->timer); gc->timer.data = (long) gc; gc->timer.function = gc_timer; - for (i = 0; i < nargs - 1; i++) { - - if (!config[i + 1]) + for (i = 0; i < n_pads; i++) { + if (!pads[i]) continue; - if (config[i + 1] < 1 || config[i + 1] > GC_MAX) { - printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", config[i + 1]); - continue; - } - - gc->dev[i].private = gc; - gc->dev[i].open = gc_open; - gc->dev[i].close = gc_close; + sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i); + err = gc_setup_pad(gc, i, pads[i]); + if (err) + goto err_free_devs; - gc->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_register_device(gc->dev[i]); + } - for (j = 0; j < 2; j++) { - set_bit(ABS_X + j, gc->dev[i].absbit); - gc->dev[i].absmin[ABS_X + j] = -1; - gc->dev[i].absmax[ABS_X + j] = 1; - } + if (!gc->pads[0]) { + printk(KERN_ERR "gamecon.c: No valid devices specified\n"); + err = -EINVAL; + goto err_free_gc; + } - gc->pads[0] |= gc_status_bit[i]; - gc->pads[config[i + 1]] |= gc_status_bit[i]; + parport_put_port(pp); + return gc; - switch(config[i + 1]) { + err_free_devs: + while (--i >= 0) + input_unregister_device(gc->dev[i]); + err_free_gc: + kfree(gc); + err_unreg_pardev: + parport_unregister_device(pd); + err_put_pp: + parport_put_port(pp); + err_out: + return ERR_PTR(err); +} - case GC_N64: - for (j = 0; j < 10; j++) - set_bit(gc_n64_btn[j], gc->dev[i].keybit); - - for (j = 0; j < 2; j++) { - set_bit(ABS_X + j, gc->dev[i].absbit); - gc->dev[i].absmin[ABS_X + j] = -127; - gc->dev[i].absmax[ABS_X + j] = 126; - gc->dev[i].absflat[ABS_X + j] = 2; - set_bit(ABS_HAT0X + j, gc->dev[i].absbit); - gc->dev[i].absmin[ABS_HAT0X + j] = -1; - gc->dev[i].absmax[ABS_HAT0X + j] = 1; - } +static void __exit gc_remove(struct gc *gc) +{ + int i; - break; + for (i = 0; i < GC_MAX_DEVICES; i++) + if (gc->dev[i]) + input_unregister_device(gc->dev[i]); + parport_unregister_device(gc->pd); + kfree(gc); +} - case GC_SNES: - for (j = 4; j < 8; j++) - set_bit(gc_snes_btn[j], gc->dev[i].keybit); - case GC_NES: - for (j = 0; j < 4; j++) - set_bit(gc_snes_btn[j], gc->dev[i].keybit); - break; - - case GC_MULTI2: - set_bit(BTN_THUMB, gc->dev[i].keybit); - case GC_MULTI: - set_bit(BTN_TRIGGER, gc->dev[i].keybit); - break; - - case GC_PSX: - case GC_DDR: - if(config[i + 1] == GC_DDR) { - for (j = 0; j < 4; j++) - set_bit(gc_psx_ddr_btn[j], gc->dev[i].keybit); - } else { - for (j = 0; j < 6; j++) { - set_bit(gc_psx_abs[j], gc->dev[i].absbit); - gc->dev[i].absmin[gc_psx_abs[j]] = 4; - gc->dev[i].absmax[gc_psx_abs[j]] = 252; - gc->dev[i].absflat[gc_psx_abs[j]] = 2; - } - } +static int __init gc_init(void) +{ + int i; + int have_dev = 0; + int err = 0; - for (j = 0; j < 12; j++) - set_bit(gc_psx_btn[j], gc->dev[i].keybit); + for (i = 0; i < GC_MAX_PORTS; i++) { + if (gc[i].nargs == 0 || gc[i].args[0] < 0) + continue; - break; + if (gc[i].nargs < 2) { + printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); + err = -EINVAL; + break; } - sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i); + gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1); + if (IS_ERR(gc_base[i])) { + err = PTR_ERR(gc_base[i]); + break; + } - gc->dev[i].name = gc_names[config[i + 1]]; - gc->dev[i].phys = gc->phys[i]; - gc->dev[i].id.bustype = BUS_PARPORT; - gc->dev[i].id.vendor = 0x0001; - gc->dev[i].id.product = config[i + 1]; - gc->dev[i].id.version = 0x0100; + have_dev = 1; } - parport_release(gc->pd); - - if (!gc->pads[0]) { - parport_unregister_device(gc->pd); - kfree(gc); - return NULL; + if (err) { + while (--i >= 0) + gc_remove(gc_base[i]); + return err; } - for (i = 0; i < 5; i++) - if (gc->pads[0] & gc_status_bit[i]) { - input_register_device(gc->dev + i); - printk(KERN_INFO "input: %s on %s\n", gc->dev[i].name, gc->pd->port->name); - } - - return gc; -} - -static int __init gc_init(void) -{ - gc_base[0] = gc_probe(gc, gc_nargs); - gc_base[1] = gc_probe(gc_2, gc_nargs_2); - gc_base[2] = gc_probe(gc_3, gc_nargs_3); - - if (gc_base[0] || gc_base[1] || gc_base[2]) - return 0; - - return -ENODEV; + return have_dev ? 0 : -ENODEV; } static void __exit gc_exit(void) { - int i, j; - - for (i = 0; i < 3; i++) - if (gc_base[i]) { - for (j = 0; j < 5; j++) - if (gc_base[i]->pads[0] & gc_status_bit[j]) - input_unregister_device(gc_base[i]->dev + j); - parport_unregister_device(gc_base[i]->pd); - } + int i; + + for (i = 0; i < GC_MAX_PORTS; i++) + if (gc_base[i]) + gc_remove(gc_base[i]); } module_init(gc_init); diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 8e4f92b115e6..e151f8c5bcb9 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -81,7 +81,7 @@ static short gf2k_seq_digital[] = { 590, 320, 860, 0 }; struct gf2k { struct gameport *gameport; - struct input_dev dev; + struct input_dev *dev; int reads; int bads; unsigned char id; @@ -175,7 +175,7 @@ static int gf2k_get_bits(unsigned char *buf, int pos, int num, int shift) static void gf2k_read(struct gf2k *gf2k, unsigned char *data) { - struct input_dev *dev = &gf2k->dev; + struct input_dev *dev = gf2k->dev; int i, t; for (i = 0; i < 4 && i < gf2k_axes[gf2k->id]; i++) @@ -239,13 +239,19 @@ static void gf2k_close(struct input_dev *dev) static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) { struct gf2k *gf2k; + struct input_dev *input_dev; unsigned char data[GF2K_LENGTH]; int i, err; - if (!(gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL))) - return -ENOMEM; + gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gf2k || !input_dev) { + err = -ENOMEM; + goto fail1; + } gf2k->gameport = gameport; + gf2k->dev = input_dev; gameport_set_drvdata(gameport, gf2k); @@ -295,53 +301,52 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) gf2k->length = gf2k_lens[gf2k->id]; - init_input_dev(&gf2k->dev); - - gf2k->dev.private = gf2k; - gf2k->dev.open = gf2k_open; - gf2k->dev.close = gf2k_close; - gf2k->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->name = gf2k_names[gf2k->id]; + input_dev->phys = gf2k->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GENIUS; + input_dev->id.product = gf2k->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = gf2k; - gf2k->dev.name = gf2k_names[gf2k->id]; - gf2k->dev.phys = gf2k->phys; - gf2k->dev.id.bustype = BUS_GAMEPORT; - gf2k->dev.id.vendor = GAMEPORT_ID_VENDOR_GENIUS; - gf2k->dev.id.product = gf2k->id; - gf2k->dev.id.version = 0x0100; + input_dev->open = gf2k_open; + input_dev->close = gf2k_close; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; i < gf2k_axes[gf2k->id]; i++) - set_bit(gf2k_abs[i], gf2k->dev.absbit); + set_bit(gf2k_abs[i], input_dev->absbit); for (i = 0; i < gf2k_hats[gf2k->id]; i++) { - set_bit(ABS_HAT0X + i, gf2k->dev.absbit); - gf2k->dev.absmin[ABS_HAT0X + i] = -1; - gf2k->dev.absmax[ABS_HAT0X + i] = 1; + set_bit(ABS_HAT0X + i, input_dev->absbit); + input_dev->absmin[ABS_HAT0X + i] = -1; + input_dev->absmax[ABS_HAT0X + i] = 1; } for (i = 0; i < gf2k_joys[gf2k->id]; i++) - set_bit(gf2k_btn_joy[i], gf2k->dev.keybit); + set_bit(gf2k_btn_joy[i], input_dev->keybit); for (i = 0; i < gf2k_pads[gf2k->id]; i++) - set_bit(gf2k_btn_pad[i], gf2k->dev.keybit); + set_bit(gf2k_btn_pad[i], input_dev->keybit); gf2k_read_packet(gameport, gf2k->length, data); gf2k_read(gf2k, data); for (i = 0; i < gf2k_axes[gf2k->id]; i++) { - gf2k->dev.absmax[gf2k_abs[i]] = (i < 2) ? gf2k->dev.abs[gf2k_abs[i]] * 2 - 32 : - gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32; - gf2k->dev.absmin[gf2k_abs[i]] = 32; - gf2k->dev.absfuzz[gf2k_abs[i]] = 8; - gf2k->dev.absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0; + input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 : + input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32; + input_dev->absmin[gf2k_abs[i]] = 32; + input_dev->absfuzz[gf2k_abs[i]] = 8; + input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0; } - input_register_device(&gf2k->dev); - printk(KERN_INFO "input: %s on %s\n", gf2k_names[gf2k->id], gameport->phys); + input_register_device(gf2k->dev); return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); + input_free_device(input_dev); kfree(gf2k); return err; } @@ -350,7 +355,7 @@ static void gf2k_disconnect(struct gameport *gameport) { struct gf2k *gf2k = gameport_get_drvdata(gameport); - input_unregister_device(&gf2k->dev); + input_unregister_device(gf2k->dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(gf2k); diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c index 9d3f910dd568..e206bb56e53c 100644 --- a/drivers/input/joystick/grip.c +++ b/drivers/input/joystick/grip.c @@ -55,7 +55,7 @@ MODULE_LICENSE("GPL"); struct grip { struct gameport *gameport; - struct input_dev dev[2]; + struct input_dev *dev[2]; unsigned char mode[2]; int reads; int bads; @@ -190,7 +190,7 @@ static void grip_poll(struct gameport *gameport) for (i = 0; i < 2; i++) { - dev = grip->dev + i; + dev = grip->dev[i]; grip->reads++; switch (grip->mode[i]) { @@ -297,6 +297,7 @@ static void grip_close(struct input_dev *dev) static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) { struct grip *grip; + struct input_dev *input_dev; unsigned int data[GRIP_LENGTH_XT]; int i, j, t; int err; @@ -339,48 +340,56 @@ static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_poll_handler(gameport, grip_poll); gameport_set_poll_interval(gameport, 20); - for (i = 0; i < 2; i++) - if (grip->mode[i]) { + for (i = 0; i < 2; i++) { + if (!grip->mode[i]) + continue; - sprintf(grip->phys[i], "%s/input%d", gameport->phys, i); + grip->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto fail3; + } - grip->dev[i].private = grip; + sprintf(grip->phys[i], "%s/input%d", gameport->phys, i); - grip->dev[i].open = grip_open; - grip->dev[i].close = grip_close; + input_dev->name = grip_name[grip->mode[i]]; + input_dev->phys = grip->phys[i]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; + input_dev->id.product = grip->mode[i]; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = grip; - grip->dev[i].name = grip_name[grip->mode[i]]; - grip->dev[i].phys = grip->phys[i]; - grip->dev[i].id.bustype = BUS_GAMEPORT; - grip->dev[i].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; - grip->dev[i].id.product = grip->mode[i]; - grip->dev[i].id.version = 0x0100; + input_dev->open = grip_open; + input_dev->close = grip_close; - grip->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) { + for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) { - if (j < grip_cen[grip->mode[i]]) - input_set_abs_params(&grip->dev[i], t, 14, 52, 1, 2); - else if (j < grip_anx[grip->mode[i]]) - input_set_abs_params(&grip->dev[i], t, 3, 57, 1, 0); - else - input_set_abs_params(&grip->dev[i], t, -1, 1, 0, 0); - } + if (j < grip_cen[grip->mode[i]]) + input_set_abs_params(input_dev, t, 14, 52, 1, 2); + else if (j < grip_anx[grip->mode[i]]) + input_set_abs_params(input_dev, t, 3, 57, 1, 0); + else + input_set_abs_params(input_dev, t, -1, 1, 0, 0); + } - for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++) - if (t > 0) - set_bit(t, grip->dev[i].keybit); + for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++) + if (t > 0) + set_bit(t, input_dev->keybit); - printk(KERN_INFO "input: %s on %s\n", - grip_name[grip->mode[i]], gameport->phys); - input_register_device(grip->dev + i); - } + input_register_device(grip->dev[i]); + } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: for (i = 0; i < 2; i++) + if (grip->dev[i]) + input_unregister_device(grip->dev[i]); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(grip); return err; } @@ -391,8 +400,8 @@ static void grip_disconnect(struct gameport *gameport) int i; for (i = 0; i < 2; i++) - if (grip->mode[i]) - input_unregister_device(grip->dev + i); + if (grip->dev[i]) + input_unregister_device(grip->dev[i]); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(grip); diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c index da17eee6f574..a0ba93ccac72 100644 --- a/drivers/input/joystick/grip_mp.c +++ b/drivers/input/joystick/grip_mp.c @@ -32,23 +32,37 @@ MODULE_LICENSE("GPL"); #define dbg(format, arg...) do {} while (0) #endif +#define GRIP_MAX_PORTS 4 /* * Grip multiport state */ +struct grip_port { + struct input_dev *dev; + int mode; + int registered; + + /* individual gamepad states */ + int buttons; + int xaxes; + int yaxes; + int dirty; /* has the state been updated? */ +}; + struct grip_mp { struct gameport *gameport; - struct input_dev dev[4]; - int mode[4]; - int registered[4]; + struct grip_port *port[GRIP_MAX_PORTS]; +// struct input_dev *dev[4]; +// int mode[4]; +// int registered[4]; int reads; int bads; /* individual gamepad states */ - int buttons[4]; - int xaxes[4]; - int yaxes[4]; - int dirty[4]; /* has the state been updated? */ +// int buttons[4]; +// int xaxes[4]; +// int yaxes[4]; +// int dirty[4]; /* has the state been updated? */ }; /* @@ -85,16 +99,16 @@ struct grip_mp { #define GRIP_MODE_GP 2 #define GRIP_MODE_C64 3 -static int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 }; -static int grip_btn_c64[] = { BTN_JOYSTICK, -1 }; +static const int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 }; +static const int grip_btn_c64[] = { BTN_JOYSTICK, -1 }; -static int grip_abs_gp[] = { ABS_X, ABS_Y, -1 }; -static int grip_abs_c64[] = { ABS_X, ABS_Y, -1 }; +static const int grip_abs_gp[] = { ABS_X, ABS_Y, -1 }; +static const int grip_abs_c64[] = { ABS_X, ABS_Y, -1 }; -static int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 }; -static int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 }; +static const int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 }; +static const int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 }; -static char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" }; +static const char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" }; static const int init_seq[] = { 1, 0, 1, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1, @@ -104,9 +118,9 @@ static const int init_seq[] = { /* Maps multiport directional values to X,Y axis values (each axis encoded in 3 bits) */ -static int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 }; +static const int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 }; -static void register_slot(int i, struct grip_mp *grip); +static int register_slot(int i, struct grip_mp *grip); /* * Returns whether an odd or even number of bits are on in pkt. @@ -353,9 +367,10 @@ static int dig_mode_start(struct gameport *gameport, u32 *packet) static int get_and_decode_packet(struct grip_mp *grip, int flags) { + struct grip_port *port; u32 packet; int joytype = 0; - int slot = 0; + int slot; /* Get a packet and check for validity */ @@ -377,6 +392,8 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags) if ((slot < 0) || (slot > 3)) return flags; + port = grip->port[slot]; + /* * Handle "reset" packets, which occur at startup, and when gamepads * are removed or plugged in. May contain configuration of a new gamepad. @@ -385,14 +402,14 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags) joytype = (packet >> 16) & 0x1f; if (!joytype) { - if (grip->registered[slot]) { + if (port->registered) { printk(KERN_INFO "grip_mp: removing %s, slot %d\n", - grip_name[grip->mode[slot]], slot); - input_unregister_device(grip->dev + slot); - grip->registered[slot] = 0; + grip_name[port->mode], slot); + input_unregister_device(port->dev); + port->registered = 0; } dbg("Reset: grip multiport slot %d\n", slot); - grip->mode[slot] = GRIP_MODE_RESET; + port->mode = GRIP_MODE_RESET; flags |= IO_SLOT_CHANGE; return flags; } @@ -402,17 +419,17 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags) if (joytype == 0x1f) { int dir = (packet >> 8) & 0xf; /* eight way directional value */ - grip->buttons[slot] = (~packet) & 0xff; - grip->yaxes[slot] = ((axis_map[dir] >> 2) & 3) - 1; - grip->xaxes[slot] = (axis_map[dir] & 3) - 1; - grip->dirty[slot] = 1; + port->buttons = (~packet) & 0xff; + port->yaxes = ((axis_map[dir] >> 2) & 3) - 1; + port->xaxes = (axis_map[dir] & 3) - 1; + port->dirty = 1; - if (grip->mode[slot] == GRIP_MODE_RESET) + if (port->mode == GRIP_MODE_RESET) flags |= IO_SLOT_CHANGE; - grip->mode[slot] = GRIP_MODE_GP; + port->mode = GRIP_MODE_GP; - if (!grip->registered[slot]) { + if (!port->registered) { dbg("New Grip pad in multiport slot %d.\n", slot); register_slot(slot, grip); } @@ -445,9 +462,9 @@ static int slots_valid(struct grip_mp *grip) return 0; for (slot = 0; slot < 4; slot++) { - if (grip->mode[slot] == GRIP_MODE_RESET) + if (grip->port[slot]->mode == GRIP_MODE_RESET) invalid = 1; - if (grip->mode[slot] != GRIP_MODE_NONE) + if (grip->port[slot]->mode != GRIP_MODE_NONE) active = 1; } @@ -484,7 +501,7 @@ static int multiport_init(struct grip_mp *grip) /* Get packets, store multiport state, and check state's validity */ for (tries = 0; tries < 4096; tries++) { - if ( slots_valid(grip) ) { + if (slots_valid(grip)) { initialized = 1; break; } @@ -499,24 +516,24 @@ static int multiport_init(struct grip_mp *grip) static void report_slot(struct grip_mp *grip, int slot) { - struct input_dev *dev = &(grip->dev[slot]); - int i, buttons = grip->buttons[slot]; + struct grip_port *port = grip->port[slot]; + int i; /* Store button states with linux input driver */ for (i = 0; i < 8; i++) - input_report_key(dev, grip_btn_gp[i], (buttons >> i) & 1); + input_report_key(port->dev, grip_btn_gp[i], (port->buttons >> i) & 1); /* Store axis states with linux driver */ - input_report_abs(dev, ABS_X, grip->xaxes[slot]); - input_report_abs(dev, ABS_Y, grip->yaxes[slot]); + input_report_abs(port->dev, ABS_X, port->xaxes); + input_report_abs(port->dev, ABS_Y, port->yaxes); /* Tell the receiver of the events to process them */ - input_sync(dev); + input_sync(port->dev); - grip->dirty[slot] = 0; + port->dirty = 0; } /* @@ -540,7 +557,7 @@ static void grip_poll(struct gameport *gameport) } for (i = 0; i < 4; i++) - if (grip->dirty[i]) + if (grip->port[i]->dirty) report_slot(grip, i); } @@ -571,35 +588,43 @@ static void grip_close(struct input_dev *dev) * Tell the linux input layer about a newly plugged-in gamepad. */ -static void register_slot(int slot, struct grip_mp *grip) +static int register_slot(int slot, struct grip_mp *grip) { + struct grip_port *port = grip->port[slot]; + struct input_dev *input_dev; int j, t; - grip->dev[slot].private = grip; - grip->dev[slot].open = grip_open; - grip->dev[slot].close = grip_close; - grip->dev[slot].name = grip_name[grip->mode[slot]]; - grip->dev[slot].id.bustype = BUS_GAMEPORT; - grip->dev[slot].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; - grip->dev[slot].id.product = 0x0100 + grip->mode[slot]; - grip->dev[slot].id.version = 0x0100; - grip->dev[slot].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + port->dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = grip_name[port->mode]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; + input_dev->id.product = 0x0100 + port->mode; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &grip->gameport->dev; + input_dev->private = grip; + + input_dev->open = grip_open; + input_dev->close = grip_close; - for (j = 0; (t = grip_abs[grip->mode[slot]][j]) >= 0; j++) - input_set_abs_params(&grip->dev[slot], t, -1, 1, 0, 0); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - for (j = 0; (t = grip_btn[grip->mode[slot]][j]) >= 0; j++) + for (j = 0; (t = grip_abs[port->mode][j]) >= 0; j++) + input_set_abs_params(input_dev, t, -1, 1, 0, 0); + + for (j = 0; (t = grip_btn[port->mode][j]) >= 0; j++) if (t > 0) - set_bit(t, grip->dev[slot].keybit); + set_bit(t, input_dev->keybit); - input_register_device(grip->dev + slot); - grip->registered[slot] = 1; + input_register_device(port->dev); + port->registered = 1; - if (grip->dirty[slot]) /* report initial state, if any */ + if (port->dirty) /* report initial state, if any */ report_slot(grip, slot); - printk(KERN_INFO "grip_mp: added %s, slot %d\n", - grip_name[grip->mode[slot]], slot); + return 0; } static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) @@ -626,7 +651,7 @@ static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) goto fail2; } - if (!grip->mode[0] && !grip->mode[1] && !grip->mode[2] && !grip->mode[3]) { + if (!grip->port[0]->mode && !grip->port[1]->mode && !grip->port[2]->mode && !grip->port[3]->mode) { /* nothing plugged in */ err = -ENODEV; goto fail2; @@ -646,8 +671,8 @@ static void grip_disconnect(struct gameport *gameport) int i; for (i = 0; i < 4; i++) - if (grip->registered[i]) - input_unregister_device(grip->dev + i); + if (grip->port[i]->registered) + input_unregister_device(grip->port[i]->dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(grip); diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c index 6a70ec429f06..c528473c09d8 100644 --- a/drivers/input/joystick/guillemot.c +++ b/drivers/input/joystick/guillemot.c @@ -67,7 +67,7 @@ struct guillemot_type { struct guillemot { struct gameport *gameport; - struct input_dev dev; + struct input_dev *dev; int bads; int reads; struct guillemot_type *type; @@ -123,7 +123,7 @@ static int guillemot_read_packet(struct gameport *gameport, u8 *data) static void guillemot_poll(struct gameport *gameport) { struct guillemot *guillemot = gameport_get_drvdata(gameport); - struct input_dev *dev = &guillemot->dev; + struct input_dev *dev = guillemot->dev; u8 data[GUILLEMOT_MAX_LENGTH]; int i; @@ -179,14 +179,20 @@ static void guillemot_close(struct input_dev *dev) static int guillemot_connect(struct gameport *gameport, struct gameport_driver *drv) { struct guillemot *guillemot; + struct input_dev *input_dev; u8 data[GUILLEMOT_MAX_LENGTH]; int i, t; int err; - if (!(guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL))) - return -ENOMEM; + guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!guillemot || !input_dev) { + err = -ENOMEM; + goto fail1; + } guillemot->gameport = gameport; + guillemot->dev = input_dev; gameport_set_drvdata(gameport, guillemot); @@ -216,41 +222,40 @@ static int guillemot_connect(struct gameport *gameport, struct gameport_driver * gameport_set_poll_interval(gameport, 20); sprintf(guillemot->phys, "%s/input0", gameport->phys); - guillemot->type = guillemot_type + i; - guillemot->dev.private = guillemot; - guillemot->dev.open = guillemot_open; - guillemot->dev.close = guillemot_close; + input_dev->name = guillemot_type[i].name; + input_dev->phys = guillemot->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT; + input_dev->id.product = guillemot_type[i].id; + input_dev->id.version = (int)data[14] << 8 | data[15]; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = guillemot; - guillemot->dev.name = guillemot_type[i].name; - guillemot->dev.phys = guillemot->phys; - guillemot->dev.id.bustype = BUS_GAMEPORT; - guillemot->dev.id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT; - guillemot->dev.id.product = guillemot_type[i].id; - guillemot->dev.id.version = (int)data[14] << 8 | data[15]; + input_dev->open = guillemot_open; + input_dev->close = guillemot_close; - guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; (t = guillemot->type->abs[i]) >= 0; i++) - input_set_abs_params(&guillemot->dev, t, 0, 255, 0, 0); + input_set_abs_params(input_dev, t, 0, 255, 0, 0); if (guillemot->type->hat) { - input_set_abs_params(&guillemot->dev, ABS_HAT0X, -1, 1, 0, 0); - input_set_abs_params(&guillemot->dev, ABS_HAT0Y, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0); } for (i = 0; (t = guillemot->type->btn[i]) >= 0; i++) - set_bit(t, guillemot->dev.keybit); + set_bit(t, input_dev->keybit); - input_register_device(&guillemot->dev); - printk(KERN_INFO "input: %s ver %d.%02d on %s\n", - guillemot->type->name, data[14], data[15], gameport->phys); + input_register_device(guillemot->dev); return 0; fail2: gameport_close(gameport); fail1: gameport_set_drvdata(gameport, NULL); + input_free_device(input_dev); kfree(guillemot); return err; } @@ -260,7 +265,7 @@ static void guillemot_disconnect(struct gameport *gameport) struct guillemot *guillemot = gameport_get_drvdata(gameport); printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys); - input_unregister_device(&guillemot->dev); + input_unregister_device(guillemot->dev); gameport_close(gameport); kfree(guillemot); } diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index e31b7b93fde2..64b9c31c47fc 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -144,7 +144,7 @@ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect) int is_update; /* Check this effect type is supported by this device */ - if (!test_bit(effect->type, iforce->dev.ffbit)) + if (!test_bit(effect->type, iforce->dev->ffbit)) return -EINVAL; /* @@ -152,30 +152,31 @@ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect) */ if (effect->id == -1) { - for (id=0; id < FF_EFFECTS_MAX; ++id) - if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) break; + for (id = 0; id < FF_EFFECTS_MAX; ++id) + if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) + break; - if ( id == FF_EFFECTS_MAX || id >= iforce->dev.ff_effects_max) + if (id == FF_EFFECTS_MAX || id >= iforce->dev->ff_effects_max) return -ENOMEM; effect->id = id; iforce->core_effects[id].owner = current->pid; - iforce->core_effects[id].flags[0] = (1<core_effects[id].flags[0] = (1 << FF_CORE_IS_USED); /* Only IS_USED bit must be set */ is_update = FALSE; } else { /* We want to update an effect */ - if (!CHECK_OWNERSHIP(effect->id, iforce)) return -EACCES; + if (!CHECK_OWNERSHIP(effect->id, iforce)) + return -EACCES; /* Parameter type cannot be updated */ if (effect->type != iforce->core_effects[effect->id].effect.type) return -EINVAL; /* Check the effect is not already being updated */ - if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) { + if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) return -EAGAIN; - } is_update = TRUE; } @@ -339,15 +340,19 @@ void iforce_delete_device(struct iforce *iforce) int iforce_init_device(struct iforce *iforce) { + struct input_dev *input_dev; unsigned char c[] = "CEOV"; int i; + input_dev = input_allocate_device(); + if (input_dev) + return -ENOMEM; + init_waitqueue_head(&iforce->wait); spin_lock_init(&iforce->xmit_lock); init_MUTEX(&iforce->mem_mutex); iforce->xmit.buf = iforce->xmit_data; - - iforce->dev.ff_effects_max = 10; + iforce->dev = input_dev; /* * Input device fields. @@ -356,26 +361,27 @@ int iforce_init_device(struct iforce *iforce) switch (iforce->bus) { #ifdef CONFIG_JOYSTICK_IFORCE_USB case IFORCE_USB: - iforce->dev.id.bustype = BUS_USB; - iforce->dev.dev = &iforce->usbdev->dev; + input_dev->id.bustype = BUS_USB; + input_dev->cdev.dev = &iforce->usbdev->dev; break; #endif #ifdef CONFIG_JOYSTICK_IFORCE_232 case IFORCE_232: - iforce->dev.id.bustype = BUS_RS232; - iforce->dev.dev = &iforce->serio->dev; + input_dev->id.bustype = BUS_RS232; + input_dev->cdev.dev = &iforce->serio->dev; break; #endif } - iforce->dev.private = iforce; - iforce->dev.name = "Unknown I-Force device"; - iforce->dev.open = iforce_open; - iforce->dev.close = iforce_release; - iforce->dev.flush = iforce_flush; - iforce->dev.event = iforce_input_event; - iforce->dev.upload_effect = iforce_upload_effect; - iforce->dev.erase_effect = iforce_erase_effect; + input_dev->private = iforce; + input_dev->name = "Unknown I-Force device"; + input_dev->open = iforce_open; + input_dev->close = iforce_release; + input_dev->flush = iforce_flush; + input_dev->event = iforce_input_event; + input_dev->upload_effect = iforce_upload_effect; + input_dev->erase_effect = iforce_erase_effect; + input_dev->ff_effects_max = 10; /* * On-device memory allocation. @@ -399,7 +405,8 @@ int iforce_init_device(struct iforce *iforce) if (i == 20) { /* 5 seconds */ printk(KERN_ERR "iforce-main.c: Timeout waiting for response from device.\n"); - return -1; + input_free_device(input_dev); + return -ENODEV; } /* @@ -407,12 +414,12 @@ int iforce_init_device(struct iforce *iforce) */ if (!iforce_get_id_packet(iforce, "M")) - iforce->dev.id.vendor = (iforce->edata[2] << 8) | iforce->edata[1]; + input_dev->id.vendor = (iforce->edata[2] << 8) | iforce->edata[1]; else printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n"); if (!iforce_get_id_packet(iforce, "P")) - iforce->dev.id.product = (iforce->edata[2] << 8) | iforce->edata[1]; + input_dev->id.product = (iforce->edata[2] << 8) | iforce->edata[1]; else printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n"); @@ -422,15 +429,15 @@ int iforce_init_device(struct iforce *iforce) printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet B\n"); if (!iforce_get_id_packet(iforce, "N")) - iforce->dev.ff_effects_max = iforce->edata[1]; + iforce->dev->ff_effects_max = iforce->edata[1]; else printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet N\n"); /* Check if the device can store more effects than the driver can really handle */ - if (iforce->dev.ff_effects_max > FF_EFFECTS_MAX) { + if (iforce->dev->ff_effects_max > FF_EFFECTS_MAX) { printk(KERN_WARNING "input??: Device can handle %d effects, but N_EFFECTS_MAX is set to %d in iforce.h\n", - iforce->dev.ff_effects_max, FF_EFFECTS_MAX); - iforce->dev.ff_effects_max = FF_EFFECTS_MAX; + iforce->dev->ff_effects_max, FF_EFFECTS_MAX); + iforce->dev->ff_effects_max = FF_EFFECTS_MAX; } /* @@ -453,29 +460,28 @@ int iforce_init_device(struct iforce *iforce) */ for (i = 0; iforce_device[i].idvendor; i++) - if (iforce_device[i].idvendor == iforce->dev.id.vendor && - iforce_device[i].idproduct == iforce->dev.id.product) + if (iforce_device[i].idvendor == input_dev->id.vendor && + iforce_device[i].idproduct == input_dev->id.product) break; iforce->type = iforce_device + i; - iforce->dev.name = iforce->type->name; + input_dev->name = iforce->type->name; /* * Set input device bitfields and ranges. */ - iforce->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS); for (i = 0; iforce->type->btn[i] >= 0; i++) { signed short t = iforce->type->btn[i]; - set_bit(t, iforce->dev.keybit); + set_bit(t, input_dev->keybit); } - set_bit(BTN_DEAD, iforce->dev.keybit); + set_bit(BTN_DEAD, input_dev->keybit); for (i = 0; iforce->type->abs[i] >= 0; i++) { signed short t = iforce->type->abs[i]; - set_bit(t, iforce->dev.absbit); switch (t) { @@ -483,52 +489,42 @@ int iforce_init_device(struct iforce *iforce) case ABS_Y: case ABS_WHEEL: - iforce->dev.absmax[t] = 1920; - iforce->dev.absmin[t] = -1920; - iforce->dev.absflat[t] = 128; - iforce->dev.absfuzz[t] = 16; - - set_bit(t, iforce->dev.ffbit); + input_set_abs_params(input_dev, t, -1920, 1920, 16, 128); + set_bit(t, input_dev->ffbit); break; case ABS_THROTTLE: case ABS_GAS: case ABS_BRAKE: - iforce->dev.absmax[t] = 255; - iforce->dev.absmin[t] = 0; + input_set_abs_params(input_dev, t, 0, 255, 0, 0); break; case ABS_RUDDER: - iforce->dev.absmax[t] = 127; - iforce->dev.absmin[t] = -128; + input_set_abs_params(input_dev, t, -128, 127, 0, 0); break; case ABS_HAT0X: case ABS_HAT0Y: case ABS_HAT1X: case ABS_HAT1Y: - iforce->dev.absmax[t] = 1; - iforce->dev.absmin[t] = -1; + + input_set_abs_params(input_dev, t, -1, 1, 0, 0); break; } } for (i = 0; iforce->type->ff[i] >= 0; i++) - set_bit(iforce->type->ff[i], iforce->dev.ffbit); + set_bit(iforce->type->ff[i], input_dev->ffbit); /* * Register input device. */ - input_register_device(&iforce->dev); - - printk(KERN_DEBUG "iforce->dev.open = %p\n", iforce->dev.open); + input_register_device(iforce->dev); - printk(KERN_INFO "input: %s [%d effects, %ld bytes memory]\n", - iforce->dev.name, iforce->dev.ff_effects_max, - iforce->device_memory.end); + printk(KERN_DEBUG "iforce->dev->open = %p\n", iforce->dev->open); return 0; } diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index e5a31e55d3e2..4a2629243e19 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -139,7 +139,8 @@ printk(KERN_DEBUG "iforce-packets.c: control_playback %d %d\n", id, value); static int mark_core_as_ready(struct iforce *iforce, unsigned short addr) { int i; - for (i=0; idev.ff_effects_max; ++i) { + + for (i = 0; i < iforce->dev->ff_effects_max; ++i) { if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) && (iforce->core_effects[i].mod1_chunk.start == addr || iforce->core_effects[i].mod2_chunk.start == addr)) { @@ -153,7 +154,7 @@ static int mark_core_as_ready(struct iforce *iforce, unsigned short addr) void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data, struct pt_regs *regs) { - struct input_dev *dev = &iforce->dev; + struct input_dev *dev = iforce->dev; int i; static int being_used = 0; diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c index 11f51905cba7..64a78c515484 100644 --- a/drivers/input/joystick/iforce/iforce-serio.c +++ b/drivers/input/joystick/iforce/iforce-serio.c @@ -131,11 +131,10 @@ static int iforce_serio_connect(struct serio *serio, struct serio_driver *drv) struct iforce *iforce; int err; - if (!(iforce = kmalloc(sizeof(struct iforce), GFP_KERNEL))) + iforce = kzalloc(sizeof(struct iforce), GFP_KERNEL); + if (!iforce) return -ENOMEM; - memset(iforce, 0, sizeof(struct iforce)); - iforce->bus = IFORCE_232; iforce->serio = serio; @@ -148,7 +147,8 @@ static int iforce_serio_connect(struct serio *serio, struct serio_driver *drv) return err; } - if (iforce_init_device(iforce)) { + err = iforce_init_device(iforce); + if (err) { serio_close(serio); serio_set_drvdata(serio, NULL); kfree(iforce); @@ -162,7 +162,7 @@ static void iforce_serio_disconnect(struct serio *serio) { struct iforce *iforce = serio_get_drvdata(serio); - input_unregister_device(&iforce->dev); + input_unregister_device(iforce->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(iforce); diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 58600f91eff5..64b4a3080985 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -135,28 +135,24 @@ static int iforce_usb_probe(struct usb_interface *intf, struct usb_host_interface *interface; struct usb_endpoint_descriptor *epirq, *epout; struct iforce *iforce; + int err = -ENOMEM; interface = intf->cur_altsetting; epirq = &interface->endpoint[0].desc; epout = &interface->endpoint[1].desc; - if (!(iforce = kmalloc(sizeof(struct iforce) + 32, GFP_KERNEL))) + if (!(iforce = kzalloc(sizeof(struct iforce) + 32, GFP_KERNEL))) goto fail; - memset(iforce, 0, sizeof(struct iforce)); - - if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) { + if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) goto fail; - } - if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) { + if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) goto fail; - } - if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) { + if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) goto fail; - } iforce->bus = IFORCE_USB; iforce->usbdev = dev; @@ -174,7 +170,9 @@ static int iforce_usb_probe(struct usb_interface *intf, usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0), (void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce); - if (iforce_init_device(iforce)) goto fail; + err = iforce_init_device(iforce); + if (err) + goto fail; usb_set_intfdata(intf, iforce); return 0; @@ -187,7 +185,7 @@ fail: kfree(iforce); } - return -ENODEV; + return err; } /* Called by iforce_delete() */ @@ -211,7 +209,7 @@ static void iforce_usb_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (iforce) { iforce->usbdev = NULL; - input_unregister_device(&iforce->dev); + input_unregister_device(iforce->dev); if (!open) { iforce_delete_device(iforce); diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index bce247bc300b..146f406b8f8a 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -117,7 +117,7 @@ struct iforce_device { }; struct iforce { - struct input_dev dev; /* Input device interface */ + struct input_dev *dev; /* Input device interface */ struct iforce_device *type; int bus; diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c index d7b3472bd686..8511ee7bb263 100644 --- a/drivers/input/joystick/interact.c +++ b/drivers/input/joystick/interact.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); struct interact { struct gameport *gameport; - struct input_dev dev; + struct input_dev *dev; int bads; int reads; unsigned char type; @@ -130,7 +130,7 @@ static int interact_read_packet(struct gameport *gameport, int length, u32 *data static void interact_poll(struct gameport *gameport) { struct interact *interact = gameport_get_drvdata(gameport); - struct input_dev *dev = &interact->dev; + struct input_dev *dev = interact->dev; u32 data[3]; int i; @@ -208,14 +208,20 @@ static void interact_close(struct input_dev *dev) static int interact_connect(struct gameport *gameport, struct gameport_driver *drv) { struct interact *interact; + struct input_dev *input_dev; __u32 data[3]; int i, t; int err; - if (!(interact = kzalloc(sizeof(struct interact), GFP_KERNEL))) - return -ENOMEM; + interact = kzalloc(sizeof(struct interact), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!interact || !input_dev) { + err = -ENOMEM; + goto fail1; + } interact->gameport = gameport; + interact->dev = input_dev; gameport_set_drvdata(gameport, interact); @@ -249,41 +255,40 @@ static int interact_connect(struct gameport *gameport, struct gameport_driver *d interact->type = i; interact->length = interact_type[i].length; - interact->dev.private = interact; - interact->dev.open = interact_open; - interact->dev.close = interact_close; + input_dev->name = interact_type[i].name; + input_dev->phys = interact->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_INTERACT; + input_dev->id.product = interact_type[i].id; + input_dev->id.version = 0x0100; + input_dev->private = interact; - interact->dev.name = interact_type[i].name; - interact->dev.phys = interact->phys; - interact->dev.id.bustype = BUS_GAMEPORT; - interact->dev.id.vendor = GAMEPORT_ID_VENDOR_INTERACT; - interact->dev.id.product = interact_type[i].id; - interact->dev.id.version = 0x0100; + input_dev->open = interact_open; + input_dev->close = interact_close; - interact->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) { - set_bit(t, interact->dev.absbit); + set_bit(t, input_dev->absbit); if (i < interact_type[interact->type].b8) { - interact->dev.absmin[t] = 0; - interact->dev.absmax[t] = 255; + input_dev->absmin[t] = 0; + input_dev->absmax[t] = 255; } else { - interact->dev.absmin[t] = -1; - interact->dev.absmax[t] = 1; + input_dev->absmin[t] = -1; + input_dev->absmax[t] = 1; } } for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++) - set_bit(t, interact->dev.keybit); + set_bit(t, input_dev->keybit); - input_register_device(&interact->dev); - printk(KERN_INFO "input: %s on %s\n", - interact_type[interact->type].name, gameport->phys); + input_register_device(interact->dev); return 0; fail2: gameport_close(gameport); fail1: gameport_set_drvdata(gameport, NULL); + input_free_device(input_dev); kfree(interact); return err; } @@ -292,7 +297,7 @@ static void interact_disconnect(struct gameport *gameport) { struct interact *interact = gameport_get_drvdata(gameport); - input_unregister_device(&interact->dev); + input_unregister_device(interact->dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(interact); diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c index 1ba503627242..ca3cc2319d6a 100644 --- a/drivers/input/joystick/magellan.c +++ b/drivers/input/joystick/magellan.c @@ -49,14 +49,13 @@ MODULE_LICENSE("GPL"); static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 }; static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; -static char *magellan_name = "LogiCad3D Magellan / SpaceMouse"; /* * Per-Magellan data. */ struct magellan { - struct input_dev dev; + struct input_dev *dev; int idx; unsigned char data[MAGELLAN_MAX_LENGTH]; char phys[32]; @@ -85,7 +84,7 @@ static int magellan_crunch_nibbles(unsigned char *data, int count) static void magellan_process_packet(struct magellan* magellan, struct pt_regs *regs) { - struct input_dev *dev = &magellan->dev; + struct input_dev *dev = magellan->dev; unsigned char *data = magellan->data; int i, t; @@ -138,9 +137,9 @@ static void magellan_disconnect(struct serio *serio) { struct magellan* magellan = serio_get_drvdata(serio); - input_unregister_device(&magellan->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(magellan->dev); kfree(magellan); } @@ -153,52 +152,48 @@ static void magellan_disconnect(struct serio *serio) static int magellan_connect(struct serio *serio, struct serio_driver *drv) { struct magellan *magellan; - int i, t; - int err; - - if (!(magellan = kmalloc(sizeof(struct magellan), GFP_KERNEL))) - return -ENOMEM; + struct input_dev *input_dev; + int err = -ENOMEM; + int i; - memset(magellan, 0, sizeof(struct magellan)); + magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!magellan || !input_dev) + goto fail; - magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + magellan->dev = input_dev; + sprintf(magellan->phys, "%s/input0", serio->phys); - for (i = 0; i < 9; i++) - set_bit(magellan_buttons[i], magellan->dev.keybit); + input_dev->name = "LogiCad3D Magellan / SpaceMouse"; + input_dev->phys = magellan->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MAGELLAN; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = magellan; - for (i = 0; i < 6; i++) { - t = magellan_axes[i]; - set_bit(t, magellan->dev.absbit); - magellan->dev.absmin[t] = -360; - magellan->dev.absmax[t] = 360; - } + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - sprintf(magellan->phys, "%s/input0", serio->phys); + for (i = 0; i < 9; i++) + set_bit(magellan_buttons[i], input_dev->keybit); - init_input_dev(&magellan->dev); - magellan->dev.private = magellan; - magellan->dev.name = magellan_name; - magellan->dev.phys = magellan->phys; - magellan->dev.id.bustype = BUS_RS232; - magellan->dev.id.vendor = SERIO_MAGELLAN; - magellan->dev.id.product = 0x0001; - magellan->dev.id.version = 0x0100; - magellan->dev.dev = &serio->dev; + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, magellan_axes[i], -360, 360, 0, 0); serio_set_drvdata(serio, magellan); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(magellan); - return err; - } - - input_register_device(&magellan->dev); - - printk(KERN_INFO "input: %s on %s\n", magellan_name, serio->phys); + if (err) + goto fail; + input_register_device(magellan->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(magellan); + return err; } /* diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c index 9e0353721a35..eaaad45cc750 100644 --- a/drivers/input/joystick/sidewinder.c +++ b/drivers/input/joystick/sidewinder.c @@ -113,7 +113,7 @@ static struct { struct sw { struct gameport *gameport; - struct input_dev dev[4]; + struct input_dev *dev[4]; char name[64]; char phys[4][32]; int length; @@ -301,7 +301,7 @@ static int sw_check(__u64 t) static int sw_parse(unsigned char *buf, struct sw *sw) { int hat, i, j; - struct input_dev *dev = sw->dev; + struct input_dev *dev; switch (sw->type) { @@ -310,6 +310,8 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (sw_check(GB(0,64)) || (hat = (GB(6,1) << 3) | GB(60,3)) > 8) return -1; + dev = sw->dev[0]; + input_report_abs(dev, ABS_X, (GB( 3,3) << 7) | GB(16,7)); input_report_abs(dev, ABS_Y, (GB( 0,3) << 7) | GB(24,7)); input_report_abs(dev, ABS_RZ, (GB(35,2) << 7) | GB(40,7)); @@ -335,13 +337,13 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (sw_parity(GB(i*15,15))) return -1; - input_report_abs(dev + i, ABS_X, GB(i*15+3,1) - GB(i*15+2,1)); - input_report_abs(dev + i, ABS_Y, GB(i*15+0,1) - GB(i*15+1,1)); + input_report_abs(sw->dev[i], ABS_X, GB(i*15+3,1) - GB(i*15+2,1)); + input_report_abs(sw->dev[i], ABS_Y, GB(i*15+0,1) - GB(i*15+1,1)); for (j = 0; j < 10; j++) - input_report_key(dev + i, sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1)); + input_report_key(sw->dev[i], sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1)); - input_sync(dev + i); + input_sync(sw->dev[i]); } return 0; @@ -352,6 +354,7 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (!sw_parity(GB(0,48)) || (hat = GB(42,4)) > 8) return -1; + dev = sw->dev[0]; input_report_abs(dev, ABS_X, GB( 9,10)); input_report_abs(dev, ABS_Y, GB(19,10)); input_report_abs(dev, ABS_RZ, GB(36, 6)); @@ -372,6 +375,7 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (!sw_parity(GB(0,43)) || (hat = GB(28,4)) > 8) return -1; + dev = sw->dev[0]; input_report_abs(dev, ABS_X, GB( 0,10)); input_report_abs(dev, ABS_Y, GB(16,10)); input_report_abs(dev, ABS_THROTTLE, GB(32, 6)); @@ -396,6 +400,7 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (!sw_parity(GB(0,33))) return -1; + dev = sw->dev[0]; input_report_abs(dev, ABS_RX, GB( 0,10)); input_report_abs(dev, ABS_RUDDER, GB(10, 6)); input_report_abs(dev, ABS_THROTTLE, GB(16, 6)); @@ -581,6 +586,7 @@ static int sw_guess_mode(unsigned char *buf, int len) static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) { struct sw *sw; + struct input_dev *input_dev; int i, j, k, l; int err; unsigned char *buf = NULL; /* [SW_LENGTH] */ @@ -729,42 +735,50 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) sprintf(sw->name, "Microsoft SideWinder %s", sw_name[sw->type]); sprintf(sw->phys[i], "%s/input%d", gameport->phys, i); - sw->dev[i].private = sw; + input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto fail3; + } - sw->dev[i].open = sw_open; - sw->dev[i].close = sw_close; + input_dev->name = sw->name; + input_dev->phys = sw->phys[i]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT; + input_dev->id.product = sw->type; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = sw; - sw->dev[i].name = sw->name; - sw->dev[i].phys = sw->phys[i]; - sw->dev[i].id.bustype = BUS_GAMEPORT; - sw->dev[i].id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT; - sw->dev[i].id.product = sw->type; - sw->dev[i].id.version = 0x0100; + input_dev->open = sw_open; + input_dev->close = sw_close; - sw->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (j = 0; (bits = sw_bit[sw->type][j]); j++) { code = sw_abs[sw->type][j]; - set_bit(code, sw->dev[i].absbit); - sw->dev[i].absmax[code] = (1 << bits) - 1; - sw->dev[i].absmin[code] = (bits == 1) ? -1 : 0; - sw->dev[i].absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0; + set_bit(code, input_dev->absbit); + input_dev->absmax[code] = (1 << bits) - 1; + input_dev->absmin[code] = (bits == 1) ? -1 : 0; + input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0; if (code != ABS_THROTTLE) - sw->dev[i].absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0; + input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0; } for (j = 0; (code = sw_btn[sw->type][j]); j++) - set_bit(code, sw->dev[i].keybit); + set_bit(code, input_dev->keybit); + + dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k); - input_register_device(sw->dev + i); - printk(KERN_INFO "input: %s%s on %s [%d-bit id %d data %d]\n", - sw->name, comment, gameport->phys, m, l, k); + input_register_device(sw->dev[i]); } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: while (--i >= 0) + input_unregister_device(sw->dev[i]); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(sw); kfree(buf); kfree(idbuf); @@ -777,7 +791,7 @@ static void sw_disconnect(struct gameport *gameport) int i; for (i = 0; i < sw->number; i++) - input_unregister_device(sw->dev + i); + input_unregister_device(sw->dev[i]); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(sw); diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c index a436f2220856..d6f8db8ec3fd 100644 --- a/drivers/input/joystick/spaceball.c +++ b/drivers/input/joystick/spaceball.c @@ -70,8 +70,7 @@ static char *spaceball_names[] = { */ struct spaceball { - struct input_dev dev; - struct serio *serio; + struct input_dev *dev; int idx; int escape; unsigned char data[SPACEBALL_MAX_LENGTH]; @@ -85,7 +84,7 @@ struct spaceball { static void spaceball_process_packet(struct spaceball* spaceball, struct pt_regs *regs) { - struct input_dev *dev = &spaceball->dev; + struct input_dev *dev = spaceball->dev; unsigned char *data = spaceball->data; int i; @@ -193,9 +192,9 @@ static void spaceball_disconnect(struct serio *serio) { struct spaceball* spaceball = serio_get_drvdata(serio); - input_unregister_device(&spaceball->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(spaceball->dev); kfree(spaceball); } @@ -208,69 +207,62 @@ static void spaceball_disconnect(struct serio *serio) static int spaceball_connect(struct serio *serio, struct serio_driver *drv) { struct spaceball *spaceball; - int i, t, id; - int err; + struct input_dev *input_dev; + int err = -ENOMEM; + int i, id; if ((id = serio->id.id) > SPACEBALL_MAX_ID) return -ENODEV; - if (!(spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL))) - return - ENOMEM; + spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!spaceball || !input_dev) + goto fail; - memset(spaceball, 0, sizeof(struct spaceball)); + spaceball->dev = input_dev; + sprintf(spaceball->phys, "%s/input0", serio->phys); + + input_dev->name = spaceball_names[id]; + input_dev->phys = spaceball->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SPACEBALL; + input_dev->id.product = id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = spaceball; - spaceball->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); switch (id) { case SPACEBALL_4000FLX: case SPACEBALL_4000FLX_L: - spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_9); - spaceball->dev.keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE); + input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_9); + input_dev->keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE); default: - spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) + input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7) | BIT(BTN_8); case SPACEBALL_3003C: - spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8); + input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8); } - for (i = 0; i < 6; i++) { - t = spaceball_axes[i]; - set_bit(t, spaceball->dev.absbit); - spaceball->dev.absmin[t] = i < 3 ? -8000 : -1600; - spaceball->dev.absmax[t] = i < 3 ? 8000 : 1600; - spaceball->dev.absflat[t] = i < 3 ? 40 : 8; - spaceball->dev.absfuzz[t] = i < 3 ? 8 : 2; + for (i = 0; i < 3; i++) { + input_set_abs_params(input_dev, ABS_X + i, -8000, 8000, 8, 40); + input_set_abs_params(input_dev, ABS_RX + i, -1600, 1600, 2, 8); } - spaceball->serio = serio; - spaceball->dev.private = spaceball; - - sprintf(spaceball->phys, "%s/input0", serio->phys); - - init_input_dev(&spaceball->dev); - spaceball->dev.name = spaceball_names[id]; - spaceball->dev.phys = spaceball->phys; - spaceball->dev.id.bustype = BUS_RS232; - spaceball->dev.id.vendor = SERIO_SPACEBALL; - spaceball->dev.id.product = id; - spaceball->dev.id.version = 0x0100; - spaceball->dev.dev = &serio->dev; - serio_set_drvdata(serio, spaceball); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(spaceball); - return err; - } - - input_register_device(&spaceball->dev); - - printk(KERN_INFO "input: %s on serio%s\n", - spaceball_names[id], serio->phys); + if (err) + goto fail; + input_register_device(spaceball->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(spaceball); + return err; } /* diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c index 01fd2e4791ae..7c123a01c58e 100644 --- a/drivers/input/joystick/spaceorb.c +++ b/drivers/input/joystick/spaceorb.c @@ -52,15 +52,13 @@ MODULE_LICENSE("GPL"); static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A }; static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; -static char *spaceorb_name = "SpaceTec SpaceOrb 360 / Avenger"; /* * Per-Orb data. */ struct spaceorb { - struct input_dev dev; - struct serio *serio; + struct input_dev *dev; int idx; unsigned char data[SPACEORB_MAX_LENGTH]; char phys[32]; @@ -78,7 +76,7 @@ static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *regs) { - struct input_dev *dev = &spaceorb->dev; + struct input_dev *dev = spaceorb->dev; unsigned char *data = spaceorb->data; unsigned char c = 0; int axes[6]; @@ -95,8 +93,8 @@ static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *r case 'R': /* Reset packet */ spaceorb->data[spaceorb->idx - 1] = 0; for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++); - printk(KERN_INFO "input: %s [%s] on %s\n", - spaceorb_name, spaceorb->data + i, spaceorb->serio->phys); + printk(KERN_INFO "input: %s [%s] is %s\n", + dev->name, spaceorb->data + i, spaceorb->phys); break; case 'D': /* Ball + button data */ @@ -123,7 +121,7 @@ static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *r case 'E': /* Error packet */ if (spaceorb->idx != 4) return; - printk(KERN_ERR "joy-spaceorb: Device error. [ "); + printk(KERN_ERR "spaceorb: Device error. [ "); for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); printk("]\n"); break; @@ -154,9 +152,9 @@ static void spaceorb_disconnect(struct serio *serio) { struct spaceorb* spaceorb = serio_get_drvdata(serio); - input_unregister_device(&spaceorb->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(spaceorb->dev); kfree(spaceorb); } @@ -169,52 +167,48 @@ static void spaceorb_disconnect(struct serio *serio) static int spaceorb_connect(struct serio *serio, struct serio_driver *drv) { struct spaceorb *spaceorb; - int i, t; - int err; - - if (!(spaceorb = kmalloc(sizeof(struct spaceorb), GFP_KERNEL))) - return -ENOMEM; - - memset(spaceorb, 0, sizeof(struct spaceorb)); + struct input_dev *input_dev; + int err = -ENOMEM; + int i; - spaceorb->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!spaceorb || !input_dev) + goto fail; - for (i = 0; i < 6; i++) - set_bit(spaceorb_buttons[i], spaceorb->dev.keybit); + spaceorb->dev = input_dev; + sprintf(spaceorb->phys, "%s/input0", serio->phys); - for (i = 0; i < 6; i++) { - t = spaceorb_axes[i]; - set_bit(t, spaceorb->dev.absbit); - spaceorb->dev.absmin[t] = -508; - spaceorb->dev.absmax[t] = 508; - } + input_dev->name = "SpaceTec SpaceOrb 360 / Avenger"; + input_dev->phys = spaceorb->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SPACEORB; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = spaceorb; - spaceorb->serio = serio; - spaceorb->dev.private = spaceorb; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - sprintf(spaceorb->phys, "%s/input0", serio->phys); + for (i = 0; i < 6; i++) + set_bit(spaceorb_buttons[i], input_dev->keybit); - init_input_dev(&spaceorb->dev); - spaceorb->dev.name = spaceorb_name; - spaceorb->dev.phys = spaceorb->phys; - spaceorb->dev.id.bustype = BUS_RS232; - spaceorb->dev.id.vendor = SERIO_SPACEORB; - spaceorb->dev.id.product = 0x0001; - spaceorb->dev.id.version = 0x0100; - spaceorb->dev.dev = &serio->dev; + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0); serio_set_drvdata(serio, spaceorb); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(spaceorb); - return err; - } - - input_register_device(&spaceorb->dev); + if (err) + goto fail; + input_register_device(spaceorb->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(spaceorb); + return err; } /* diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c index 6f6e6753d590..0a9ed1d30636 100644 --- a/drivers/input/joystick/stinger.c +++ b/drivers/input/joystick/stinger.c @@ -48,14 +48,12 @@ MODULE_LICENSE("GPL"); #define STINGER_MAX_LENGTH 8 -static char *stinger_name = "Gravis Stinger"; - /* * Per-Stinger data. */ struct stinger { - struct input_dev dev; + struct input_dev *dev; int idx; unsigned char data[STINGER_MAX_LENGTH]; char phys[32]; @@ -68,7 +66,7 @@ struct stinger { static void stinger_process_packet(struct stinger *stinger, struct pt_regs *regs) { - struct input_dev *dev = &stinger->dev; + struct input_dev *dev = stinger->dev; unsigned char *data = stinger->data; if (!stinger->idx) return; @@ -126,9 +124,9 @@ static void stinger_disconnect(struct serio *serio) { struct stinger *stinger = serio_get_drvdata(serio); - input_unregister_device(&stinger->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(stinger->dev); kfree(stinger); } @@ -141,53 +139,46 @@ static void stinger_disconnect(struct serio *serio) static int stinger_connect(struct serio *serio, struct serio_driver *drv) { struct stinger *stinger; - int i; - int err; - - if (!(stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL))) - return -ENOMEM; - - memset(stinger, 0, sizeof(struct stinger)); + struct input_dev *input_dev; + int err = -ENOMEM; - stinger->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - stinger->dev.keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | \ - BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | \ - BIT(BTN_START) | BIT(BTN_SELECT); - stinger->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!stinger || !input_dev) + goto fail; + stinger->dev = input_dev; sprintf(stinger->phys, "%s/serio0", serio->phys); - init_input_dev(&stinger->dev); - stinger->dev.name = stinger_name; - stinger->dev.phys = stinger->phys; - stinger->dev.id.bustype = BUS_RS232; - stinger->dev.id.vendor = SERIO_STINGER; - stinger->dev.id.product = 0x0001; - stinger->dev.id.version = 0x0100; - stinger->dev.dev = &serio->dev; - - for (i = 0; i < 2; i++) { - stinger->dev.absmax[ABS_X+i] = 64; - stinger->dev.absmin[ABS_X+i] = -64; - stinger->dev.absflat[ABS_X+i] = 4; - } - - stinger->dev.private = stinger; + input_dev->name = "Gravis Stinger"; + input_dev->phys = stinger->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_STINGER; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = stinger; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | + BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | + BIT(BTN_START) | BIT(BTN_SELECT); + input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 4); + input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 4); serio_set_drvdata(serio, stinger); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(stinger); - return err; - } - - input_register_device(&stinger->dev); - - printk(KERN_INFO "input: %s on %s\n", stinger_name, serio->phys); + if (err) + goto fail; + input_register_device(stinger->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(stinger); + return err; } /* diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c index 7431efc4330e..3a7d1bb46472 100644 --- a/drivers/input/joystick/tmdc.c +++ b/drivers/input/joystick/tmdc.c @@ -63,37 +63,70 @@ MODULE_LICENSE("GPL"); #define TMDC_ABS_HAT 4 #define TMDC_BTN 16 -static unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 }; -static unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 }; +static const unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 }; +static const unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 }; -static signed char tmdc_abs[TMDC_ABS] = +static const signed char tmdc_abs[TMDC_ABS] = { ABS_X, ABS_Y, ABS_RUDDER, ABS_THROTTLE, ABS_RX, ABS_RY, ABS_RZ }; -static signed char tmdc_abs_hat[TMDC_ABS_HAT] = +static const signed char tmdc_abs_hat[TMDC_ABS_HAT] = { ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y }; -static signed char tmdc_abs_at[TMDC_ABS] = +static const signed char tmdc_abs_at[TMDC_ABS] = { ABS_X, ABS_Y, ABS_RUDDER, -1, ABS_THROTTLE }; -static signed char tmdc_abs_fm[TMDC_ABS] = +static const signed char tmdc_abs_fm[TMDC_ABS] = { ABS_RX, ABS_RY, ABS_X, ABS_Y }; -static short tmdc_btn_pad[TMDC_BTN] = +static const short tmdc_btn_pad[TMDC_BTN] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_START, BTN_SELECT, BTN_TL, BTN_TR }; -static short tmdc_btn_joy[TMDC_BTN] = +static const short tmdc_btn_joy[TMDC_BTN] = { BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_THUMB2, BTN_PINKIE, BTN_BASE3, BTN_BASE4, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z }; -static short tmdc_btn_fm[TMDC_BTN] = +static const short tmdc_btn_fm[TMDC_BTN] = { BTN_TRIGGER, BTN_C, BTN_B, BTN_A, BTN_THUMB, BTN_X, BTN_Y, BTN_Z, BTN_TOP, BTN_TOP2 }; -static short tmdc_btn_at[TMDC_BTN] = +static const short tmdc_btn_at[TMDC_BTN] = { BTN_TRIGGER, BTN_THUMB2, BTN_PINKIE, BTN_THUMB, BTN_BASE6, BTN_BASE5, BTN_BASE4, BTN_BASE3, BTN_BASE2, BTN_BASE }; -static struct { +static const struct { int x; int y; } tmdc_hat_to_axis[] = {{ 0, 0}, { 1, 0}, { 0,-1}, {-1, 0}, { 0, 1}}; +static const struct tmdc_model { + unsigned char id; + const char *name; + char abs; + char hats; + char btnc[4]; + char btno[4]; + const signed char *axes; + const short *buttons; +} tmdc_models[] = { + { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy }, + { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, + { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at }, + { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm }, + { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, + { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy } +}; + + +struct tmdc_port { + struct input_dev *dev; + char name[64]; + char phys[32]; + int mode; + const signed char *abs; + const short *btn; + unsigned char absc; + unsigned char btnc[4]; + unsigned char btno[4]; +}; + struct tmdc { struct gameport *gameport; - struct input_dev dev[2]; + struct tmdc_port *port[2]; +#if 0 + struct input_dev *dev[2]; char name[2][64]; char phys[2][32]; int mode[2]; @@ -102,6 +135,7 @@ struct tmdc { unsigned char absc[2]; unsigned char btnc[2][4]; unsigned char btno[2][4]; +#endif int reads; int bads; unsigned char exists; @@ -156,6 +190,50 @@ static int tmdc_read_packet(struct gameport *gameport, unsigned char data[2][TMD return (i[0] == TMDC_MAX_LENGTH) | ((i[1] == TMDC_MAX_LENGTH) << 1); } +static int tmdc_parse_packet(struct tmdc_port *port, unsigned char *data) +{ + int i, k, l; + + if (data[TMDC_BYTE_ID] != port->mode) + return -1; + + for (i = 0; i < port->absc; i++) { + if (port->abs[i] < 0) + return 0; + + input_report_abs(port->dev, port->abs[i], data[tmdc_byte_a[i]]); + } + + switch (port->mode) { + + case TMDC_MODE_M3DI: + + i = tmdc_byte_d[0]; + input_report_abs(port->dev, ABS_HAT0X, ((data[i] >> 3) & 1) - ((data[i] >> 1) & 1)); + input_report_abs(port->dev, ABS_HAT0Y, ((data[i] >> 2) & 1) - ( data[i] & 1)); + break; + + case TMDC_MODE_AT: + + i = tmdc_byte_a[3]; + input_report_abs(port->dev, ABS_HAT0X, tmdc_hat_to_axis[(data[i] - 141) / 25].x); + input_report_abs(port->dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[i] - 141) / 25].y); + break; + + } + + for (k = l = 0; k < 4; k++) { + for (i = 0; i < port->btnc[k]; i++) + input_report_key(port->dev, port->btn[i + l], + ((data[tmdc_byte_d[k]] >> (i + port->btno[k])) & 1)); + l += port->btnc[k]; + } + + input_sync(port->dev); + + return 0; +} + /* * tmdc_poll() reads and analyzes ThrustMaster joystick data. */ @@ -164,57 +242,21 @@ static void tmdc_poll(struct gameport *gameport) { unsigned char data[2][TMDC_MAX_LENGTH]; struct tmdc *tmdc = gameport_get_drvdata(gameport); - struct input_dev *dev; unsigned char r, bad = 0; - int i, j, k, l; + int i; tmdc->reads++; if ((r = tmdc_read_packet(tmdc->gameport, data)) != tmdc->exists) bad = 1; - else - - for (j = 0; j < 2; j++) - if (r & (1 << j) & tmdc->exists) { - - if (data[j][TMDC_BYTE_ID] != tmdc->mode[j]) { - bad = 1; - continue; - } - - dev = tmdc->dev + j; - - for (i = 0; i < tmdc->absc[j]; i++) { - if (tmdc->abs[j][i] < 0) continue; - input_report_abs(dev, tmdc->abs[j][i], data[j][tmdc_byte_a[i]]); - } - - switch (tmdc->mode[j]) { + else { + for (i = 0; i < 2; i++) { + if (r & (1 << i) & tmdc->exists) { - case TMDC_MODE_M3DI: - - i = tmdc_byte_d[0]; - input_report_abs(dev, ABS_HAT0X, ((data[j][i] >> 3) & 1) - ((data[j][i] >> 1) & 1)); - input_report_abs(dev, ABS_HAT0Y, ((data[j][i] >> 2) & 1) - ( data[j][i] & 1)); - break; - - case TMDC_MODE_AT: - - i = tmdc_byte_a[3]; - input_report_abs(dev, ABS_HAT0X, tmdc_hat_to_axis[(data[j][i] - 141) / 25].x); - input_report_abs(dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[j][i] - 141) / 25].y); - break; - - } - - for (k = l = 0; k < 4; k++) { - for (i = 0; i < tmdc->btnc[j][k]; i++) - input_report_key(dev, tmdc->btn[j][i + l], - ((data[j][tmdc_byte_d[k]] >> (i + tmdc->btno[j][k])) & 1)); - l += tmdc->btnc[j][k]; + if (tmdc_parse_packet(tmdc->port[i], data[i])) + bad = 1; } - - input_sync(dev); + } } tmdc->bads += bad; @@ -235,31 +277,89 @@ static void tmdc_close(struct input_dev *dev) gameport_stop_polling(tmdc->gameport); } +static int tmdc_setup_port(struct tmdc *tmdc, int idx, unsigned char *data) +{ + const struct tmdc_model *model; + struct tmdc_port *port; + struct input_dev *input_dev; + int i, j, b = 0; + + tmdc->port[idx] = port = kzalloc(sizeof (struct tmdc_port), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!port || !input_dev) { + kfree(port); + input_free_device(input_dev); + return -ENOMEM; + } + + port->mode = data[TMDC_BYTE_ID]; + + for (model = tmdc_models; model->id && model->id != port->mode; model++) + /* empty */; + + port->abs = model->axes; + port->btn = model->buttons; + + if (!model->id) { + port->absc = data[TMDC_BYTE_DEF] >> 4; + for (i = 0; i < 4; i++) + port->btnc[i] = i < (data[TMDC_BYTE_DEF] & 0xf) ? 8 : 0; + } else { + port->absc = model->abs; + for (i = 0; i < 4; i++) + port->btnc[i] = model->btnc[i]; + } + + for (i = 0; i < 4; i++) + port->btno[i] = model->btno[i]; + + snprintf(port->name, sizeof(port->name), model->name, + port->absc, (data[TMDC_BYTE_DEF] & 0xf) << 3, port->mode); + snprintf(port->phys, sizeof(port->phys), "%s/input%d", tmdc->gameport->phys, i); + + port->dev = input_dev; + + input_dev->name = port->name; + input_dev->phys = port->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER; + input_dev->id.product = model->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &tmdc->gameport->dev; + input_dev->private = tmdc; + + input_dev->open = tmdc_open; + input_dev->close = tmdc_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + + for (i = 0; i < port->absc && i < TMDC_ABS; i++) + if (port->abs[i] >= 0) + input_set_abs_params(input_dev, port->abs[i], 8, 248, 2, 4); + + for (i = 0; i < model->hats && i < TMDC_ABS_HAT; i++) + input_set_abs_params(input_dev, tmdc_abs_hat[i], -1, 1, 0, 0); + + for (i = 0; i < 4; i++) { + for (j = 0; j < port->btnc[i] && j < TMDC_BTN; j++) + set_bit(port->btn[j + b], input_dev->keybit); + b += port->btnc[i]; + } + + input_register_device(port->dev); + + return 0; +} + /* * tmdc_probe() probes for ThrustMaster type joysticks. */ static int tmdc_connect(struct gameport *gameport, struct gameport_driver *drv) { - static struct models { - unsigned char id; - char *name; - char abs; - char hats; - char btnc[4]; - char btno[4]; - signed char *axes; - short *buttons; - } models[] = { { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy }, - { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, - { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at }, - { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm }, - { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, - { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy }}; - unsigned char data[2][TMDC_MAX_LENGTH]; struct tmdc *tmdc; - int i, j, k, l, m; + int i; int err; if (!(tmdc = kzalloc(sizeof(struct tmdc), GFP_KERNEL))) @@ -281,68 +381,25 @@ static int tmdc_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_poll_handler(gameport, tmdc_poll); gameport_set_poll_interval(gameport, 20); - for (j = 0; j < 2; j++) - if (tmdc->exists & (1 << j)) { + for (i = 0; i < 2; i++) { + if (tmdc->exists & (1 << i)) { - tmdc->mode[j] = data[j][TMDC_BYTE_ID]; - - for (m = 0; models[m].id && models[m].id != tmdc->mode[j]; m++); - - tmdc->abs[j] = models[m].axes; - tmdc->btn[j] = models[m].buttons; - - if (!models[m].id) { - models[m].abs = data[j][TMDC_BYTE_DEF] >> 4; - for (k = 0; k < 4; k++) - models[m].btnc[k] = k < (data[j][TMDC_BYTE_DEF] & 0xf) ? 8 : 0; - } - - tmdc->absc[j] = models[m].abs; - for (k = 0; k < 4; k++) { - tmdc->btnc[j][k] = models[m].btnc[k]; - tmdc->btno[j][k] = models[m].btno[k]; - } - - sprintf(tmdc->name[j], models[m].name, models[m].abs, - (data[j][TMDC_BYTE_DEF] & 0xf) << 3, tmdc->mode[j]); - - sprintf(tmdc->phys[j], "%s/input%d", gameport->phys, j); - - tmdc->dev[j].private = tmdc; - tmdc->dev[j].open = tmdc_open; - tmdc->dev[j].close = tmdc_close; - - tmdc->dev[j].name = tmdc->name[j]; - tmdc->dev[j].phys = tmdc->phys[j]; - tmdc->dev[j].id.bustype = BUS_GAMEPORT; - tmdc->dev[j].id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER; - tmdc->dev[j].id.product = models[m].id; - tmdc->dev[j].id.version = 0x0100; - - tmdc->dev[j].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - - for (i = 0; i < models[m].abs && i < TMDC_ABS; i++) - if (tmdc->abs[j][i] >= 0) - input_set_abs_params(&tmdc->dev[j], tmdc->abs[j][i], 8, 248, 2, 4); - - for (i = 0; i < models[m].hats && i < TMDC_ABS_HAT; i++) - input_set_abs_params(&tmdc->dev[j], tmdc_abs_hat[i], -1, 1, 0, 0); - - - for (k = l = 0; k < 4; k++) { - for (i = 0; i < models[m].btnc[k] && i < TMDC_BTN; i++) - set_bit(tmdc->btn[j][i + l], tmdc->dev[j].keybit); - l += models[m].btnc[k]; - } - - input_register_device(tmdc->dev + j); - printk(KERN_INFO "input: %s on %s\n", tmdc->name[j], gameport->phys); + err = tmdc_setup_port(tmdc, i, data[i]); + if (err) + goto fail3; } + } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: while (--i >= 0) { + if (tmdc->port[i]) { + input_unregister_device(tmdc->port[i]->dev); + kfree(tmdc->port[i]); + } + } + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(tmdc); return err; } @@ -352,9 +409,12 @@ static void tmdc_disconnect(struct gameport *gameport) struct tmdc *tmdc = gameport_get_drvdata(gameport); int i; - for (i = 0; i < 2; i++) - if (tmdc->exists & (1 << i)) - input_unregister_device(tmdc->dev + i); + for (i = 0; i < 2; i++) { + if (tmdc->port[i]) { + input_unregister_device(tmdc->port[i]->dev); + kfree(tmdc->port[i]); + } + } gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(tmdc); diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 0c5b9c8297cd..7e9764937d06 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -42,19 +42,21 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("TurboGraFX parallel port interface driver"); MODULE_LICENSE("GPL"); -static int tgfx[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 }; -static int tgfx_nargs __initdata = 0; -module_param_array_named(map, tgfx, int, &tgfx_nargs, 0); -MODULE_PARM_DESC(map, "Describes first set of devices (,,,.."); +#define TGFX_MAX_PORTS 3 +#define TGFX_MAX_DEVICES 7 -static int tgfx_2[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 }; -static int tgfx_nargs_2 __initdata = 0; -module_param_array_named(map2, tgfx_2, int, &tgfx_nargs_2, 0); -MODULE_PARM_DESC(map2, "Describes second set of devices"); +struct tgfx_config { + int args[TGFX_MAX_DEVICES + 1]; + int nargs; +}; + +static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata; -static int tgfx_3[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 }; -static int tgfx_nargs_3 __initdata = 0; -module_param_array_named(map3, tgfx_3, int, &tgfx_nargs_3, 0); +module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0); +MODULE_PARM_DESC(map, "Describes first set of devices (,,,.."); +module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0); +MODULE_PARM_DESC(map2, "Describes second set of devices"); +module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0); MODULE_PARM_DESC(map3, "Describes third set of devices"); __obsolete_setup("tgfx="); @@ -75,17 +77,17 @@ __obsolete_setup("tgfx_3="); #define TGFX_TOP2 0x08 static int tgfx_buttons[] = { BTN_TRIGGER, BTN_THUMB, BTN_THUMB2, BTN_TOP, BTN_TOP2 }; -static char *tgfx_name = "TurboGraFX Multisystem joystick"; static struct tgfx { struct pardevice *pd; struct timer_list timer; - struct input_dev dev[7]; - char phys[7][32]; + struct input_dev *dev[TGFX_MAX_DEVICES]; + char name[TGFX_MAX_DEVICES][64]; + char phys[TGFX_MAX_DEVICES][32]; int sticks; int used; struct semaphore sem; -} *tgfx_base[3]; +} *tgfx_base[TGFX_MAX_PORTS]; /* * tgfx_timer() reads and analyzes TurboGraFX joystick data. @@ -100,7 +102,7 @@ static void tgfx_timer(unsigned long private) for (i = 0; i < 7; i++) if (tgfx->sticks & (1 << i)) { - dev = tgfx->dev + i; + dev = tgfx->dev[i]; parport_write_data(tgfx->pd->port, ~(1 << i)); data1 = parport_read_status(tgfx->pd->port) ^ 0x7f; @@ -153,118 +155,165 @@ static void tgfx_close(struct input_dev *dev) up(&tgfx->sem); } + + /* * tgfx_probe() probes for tg gamepads. */ -static struct tgfx __init *tgfx_probe(int *config, int nargs) +static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs) { struct tgfx *tgfx; + struct input_dev *input_dev; struct parport *pp; + struct pardevice *pd; int i, j; + int err; - if (config[0] < 0) - return NULL; - - if (nargs < 2) { - printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); - return NULL; - } - - pp = parport_find_number(config[0]); - + pp = parport_find_number(parport); if (!pp) { printk(KERN_ERR "turbografx.c: no such parport\n"); - return NULL; + err = -EINVAL; + goto err_out; } - if (!(tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL))) { - parport_put_port(pp); - return NULL; + pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (!pd) { + printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n"); + err = -EBUSY; + goto err_put_pp; } - init_MUTEX(&tgfx->sem); - - tgfx->pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); - - parport_put_port(pp); - - if (!tgfx->pd) { - printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n"); - kfree(tgfx); - return NULL; + tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL); + if (!tgfx) { + printk(KERN_ERR "turbografx.c: Not enough memory\n"); + err = -ENOMEM; + goto err_unreg_pardev; } + init_MUTEX(&tgfx->sem); + tgfx->pd = pd; init_timer(&tgfx->timer); tgfx->timer.data = (long) tgfx; tgfx->timer.function = tgfx_timer; - tgfx->sticks = 0; + for (i = 0; i < n_devs; i++) { + if (n_buttons[i] < 1) + continue; - for (i = 0; i < nargs - 1; i++) - if (config[i+1] > 0 && config[i+1] < 6) { - - tgfx->sticks |= (1 << i); + if (n_buttons[i] > 6) { + printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]); + err = -EINVAL; + goto err_free_devs; + } - tgfx->dev[i].private = tgfx; - tgfx->dev[i].open = tgfx_open; - tgfx->dev[i].close = tgfx_close; + tgfx->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + printk(KERN_ERR "turbografx.c: Not enough memory for input device\n"); + err = -ENOMEM; + goto err_free_devs; + } - sprintf(tgfx->phys[i], "%s/input0", tgfx->pd->port->name); + tgfx->sticks |= (1 << i); + snprintf(tgfx->name[i], sizeof(tgfx->name[i]), + "TurboGraFX %d-button Multisystem joystick", n_buttons[i]); + snprintf(tgfx->phys[i], sizeof(tgfx->phys[i]), + "%s/input%d", tgfx->pd->port->name, i); - tgfx->dev[i].name = tgfx_name; - tgfx->dev[i].phys = tgfx->phys[i]; - tgfx->dev[i].id.bustype = BUS_PARPORT; - tgfx->dev[i].id.vendor = 0x0003; - tgfx->dev[i].id.product = config[i+1]; - tgfx->dev[i].id.version = 0x0100; + input_dev->name = tgfx->name[i]; + input_dev->phys = tgfx->phys[i]; + input_dev->id.bustype = BUS_PARPORT; + input_dev->id.vendor = 0x0003; + input_dev->id.product = n_buttons[i]; + input_dev->id.version = 0x0100; - tgfx->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + input_dev->private = tgfx; + input_dev->open = tgfx_open; + input_dev->close = tgfx_close; - for (j = 0; j < config[i+1]; j++) - set_bit(tgfx_buttons[j], tgfx->dev[i].keybit); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0); - tgfx->dev[i].absmin[ABS_X] = -1; tgfx->dev[i].absmax[ABS_X] = 1; - tgfx->dev[i].absmin[ABS_Y] = -1; tgfx->dev[i].absmax[ABS_Y] = 1; + for (j = 0; j < n_buttons[i]; j++) + set_bit(tgfx_buttons[j], input_dev->keybit); - input_register_device(tgfx->dev + i); - printk(KERN_INFO "input: %d-button Multisystem joystick on %s\n", - config[i+1], tgfx->pd->port->name); - } + input_register_device(tgfx->dev[i]); + } if (!tgfx->sticks) { - parport_unregister_device(tgfx->pd); - kfree(tgfx); - return NULL; + printk(KERN_ERR "turbografx.c: No valid devices specified\n"); + err = -EINVAL; + goto err_free_tgfx; } return tgfx; + + err_free_devs: + while (--i >= 0) + input_unregister_device(tgfx->dev[i]); + err_free_tgfx: + kfree(tgfx); + err_unreg_pardev: + parport_unregister_device(pd); + err_put_pp: + parport_put_port(pp); + err_out: + return ERR_PTR(err); +} + +static void __exit tgfx_remove(struct tgfx *tgfx) +{ + int i; + + for (i = 0; i < TGFX_MAX_DEVICES; i++) + if (tgfx->dev[i]) + input_unregister_device(tgfx->dev[i]); + parport_unregister_device(tgfx->pd); + kfree(tgfx); } static int __init tgfx_init(void) { - tgfx_base[0] = tgfx_probe(tgfx, tgfx_nargs); - tgfx_base[1] = tgfx_probe(tgfx_2, tgfx_nargs_2); - tgfx_base[2] = tgfx_probe(tgfx_3, tgfx_nargs_3); + int i; + int have_dev = 0; + int err = 0; + + for (i = 0; i < TGFX_MAX_PORTS; i++) { + if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0) + continue; + + if (tgfx[i].nargs < 2) { + printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); + err = -EINVAL; + break; + } + + tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1); + if (IS_ERR(tgfx_base[i])) { + err = PTR_ERR(tgfx_base[i]); + break; + } + + have_dev = 1; + } - if (tgfx_base[0] || tgfx_base[1] || tgfx_base[2]) - return 0; + if (err) { + while (--i >= 0) + tgfx_remove(tgfx_base[i]); + return err; + } - return -ENODEV; + return have_dev ? 0 : -ENODEV; } static void __exit tgfx_exit(void) { - int i, j; + int i; - for (i = 0; i < 3; i++) - if (tgfx_base[i]) { - for (j = 0; j < 7; j++) - if (tgfx_base[i]->sticks & (1 << j)) - input_unregister_device(tgfx_base[i]->dev + j); - parport_unregister_device(tgfx_base[i]->pd); - } + for (i = 0; i < TGFX_MAX_PORTS; i++) + if (tgfx_base[i]) + tgfx_remove(tgfx_base[i]); } module_init(tgfx_init); diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c index 0379bc166525..cd3a1e742a30 100644 --- a/drivers/input/joystick/twidjoy.c +++ b/drivers/input/joystick/twidjoy.c @@ -69,8 +69,6 @@ MODULE_LICENSE("GPL"); #define TWIDJOY_MAX_LENGTH 5 -static char *twidjoy_name = "Handykey Twiddler"; - static struct twidjoy_button_spec { int bitshift; int bitmask; @@ -95,7 +93,7 @@ twidjoy_buttons[] = { */ struct twidjoy { - struct input_dev dev; + struct input_dev *dev; int idx; unsigned char data[TWIDJOY_MAX_LENGTH]; char phys[32]; @@ -108,37 +106,33 @@ struct twidjoy { static void twidjoy_process_packet(struct twidjoy *twidjoy, struct pt_regs *regs) { - if (twidjoy->idx == TWIDJOY_MAX_LENGTH) { - struct input_dev *dev = &twidjoy->dev; - unsigned char *data = twidjoy->data; - struct twidjoy_button_spec *bp; - int button_bits, abs_x, abs_y; - - button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f); + struct input_dev *dev = twidjoy->dev; + unsigned char *data = twidjoy->data; + struct twidjoy_button_spec *bp; + int button_bits, abs_x, abs_y; - input_regs(dev, regs); + button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f); - for (bp = twidjoy_buttons; bp->bitmask; bp++) { - int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift; - int i; + input_regs(dev, regs); - for (i = 0; i < bp->bitmask; i++) - input_report_key(dev, bp->buttons[i], i+1 == value); - } + for (bp = twidjoy_buttons; bp->bitmask; bp++) { + int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift; + int i; - abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2); - if (data[4] & 0x08) abs_x -= 256; + for (i = 0; i < bp->bitmask; i++) + input_report_key(dev, bp->buttons[i], i+1 == value); + } - abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0); - if (data[3] & 0x02) abs_y -= 256; + abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2); + if (data[4] & 0x08) abs_x -= 256; - input_report_abs(dev, ABS_X, -abs_x); - input_report_abs(dev, ABS_Y, +abs_y); + abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0); + if (data[3] & 0x02) abs_y -= 256; - input_sync(dev); - } + input_report_abs(dev, ABS_X, -abs_x); + input_report_abs(dev, ABS_Y, +abs_y); - return; + input_sync(dev); } /* @@ -179,9 +173,9 @@ static void twidjoy_disconnect(struct serio *serio) { struct twidjoy *twidjoy = serio_get_drvdata(serio); - input_unregister_device(&twidjoy->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(twidjoy->dev); kfree(twidjoy); } @@ -195,59 +189,49 @@ static int twidjoy_connect(struct serio *serio, struct serio_driver *drv) { struct twidjoy_button_spec *bp; struct twidjoy *twidjoy; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(twidjoy = kmalloc(sizeof(struct twidjoy), GFP_KERNEL))) - return -ENOMEM; - memset(twidjoy, 0, sizeof(struct twidjoy)); + twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!twidjoy || !input_dev) + goto fail; + twidjoy->dev = input_dev; sprintf(twidjoy->phys, "%s/input0", serio->phys); - init_input_dev(&twidjoy->dev); - twidjoy->dev.name = twidjoy_name; - twidjoy->dev.phys = twidjoy->phys; - twidjoy->dev.id.bustype = BUS_RS232; - twidjoy->dev.id.vendor = SERIO_TWIDJOY; - twidjoy->dev.id.product = 0x0001; - twidjoy->dev.id.version = 0x0100; - twidjoy->dev.dev = &serio->dev; - - twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - - for (bp = twidjoy_buttons; bp->bitmask; bp++) { + input_dev->name = "Handykey Twiddler"; + input_dev->phys = twidjoy->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TWIDJOY; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = twidjoy; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + input_set_abs_params(input_dev, ABS_X, -50, 50, 4, 4); + input_set_abs_params(input_dev, ABS_Y, -50, 50, 4, 4); + + for (bp = twidjoy_buttons; bp->bitmask; bp++) for (i = 0; i < bp->bitmask; i++) - set_bit(bp->buttons[i], twidjoy->dev.keybit); - } - - twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - - for (i = 0; i < 2; i++) { - twidjoy->dev.absmax[ABS_X+i] = 50; - twidjoy->dev.absmin[ABS_X+i] = -50; - - /* TODO: arndt 20010708: Are these values appropriate? */ - twidjoy->dev.absfuzz[ABS_X+i] = 4; - twidjoy->dev.absflat[ABS_X+i] = 4; - } - - twidjoy->dev.private = twidjoy; + set_bit(bp->buttons[i], input_dev->keybit); serio_set_drvdata(serio, twidjoy); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(twidjoy); - return err; - } - - input_register_device(&twidjoy->dev); - - printk(KERN_INFO "input: %s on %s\n", twidjoy_name, serio->phys); + if (err) + goto fail; + input_register_device(twidjoy->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(twidjoy); + return err; } /* diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c index 6976a219504c..99a642d2a1fe 100644 --- a/drivers/input/joystick/warrior.c +++ b/drivers/input/joystick/warrior.c @@ -47,14 +47,13 @@ MODULE_LICENSE("GPL"); #define WARRIOR_MAX_LENGTH 16 static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 }; -static char *warrior_name = "Logitech WingMan Warrior"; /* * Per-Warrior data. */ struct warrior { - struct input_dev dev; + struct input_dev *dev; int idx, len; unsigned char data[WARRIOR_MAX_LENGTH]; char phys[32]; @@ -67,7 +66,7 @@ struct warrior { static void warrior_process_packet(struct warrior *warrior, struct pt_regs *regs) { - struct input_dev *dev = &warrior->dev; + struct input_dev *dev = warrior->dev; unsigned char *data = warrior->data; if (!warrior->idx) return; @@ -131,9 +130,9 @@ static void warrior_disconnect(struct serio *serio) { struct warrior *warrior = serio_get_drvdata(serio); - input_unregister_device(&warrior->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(warrior->dev); kfree(warrior); } @@ -146,60 +145,48 @@ static void warrior_disconnect(struct serio *serio) static int warrior_connect(struct serio *serio, struct serio_driver *drv) { struct warrior *warrior; - int i; - int err; + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(warrior = kmalloc(sizeof(struct warrior), GFP_KERNEL))) - return -ENOMEM; - - memset(warrior, 0, sizeof(struct warrior)); - - warrior->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); - warrior->dev.keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2); - warrior->dev.relbit[0] = BIT(REL_DIAL); - warrior->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y); + warrior = kzalloc(sizeof(struct warrior), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!warrior || !input_dev) + goto fail; + warrior->dev = input_dev; sprintf(warrior->phys, "%s/input0", serio->phys); - init_input_dev(&warrior->dev); - warrior->dev.name = warrior_name; - warrior->dev.phys = warrior->phys; - warrior->dev.id.bustype = BUS_RS232; - warrior->dev.id.vendor = SERIO_WARRIOR; - warrior->dev.id.product = 0x0001; - warrior->dev.id.version = 0x0100; - warrior->dev.dev = &serio->dev; - - for (i = 0; i < 2; i++) { - warrior->dev.absmax[ABS_X+i] = -64; - warrior->dev.absmin[ABS_X+i] = 64; - warrior->dev.absflat[ABS_X+i] = 8; - } - - warrior->dev.absmax[ABS_THROTTLE] = -112; - warrior->dev.absmin[ABS_THROTTLE] = 112; - - for (i = 0; i < 2; i++) { - warrior->dev.absmax[ABS_HAT0X+i] = -1; - warrior->dev.absmin[ABS_HAT0X+i] = 1; - } - - warrior->dev.private = warrior; + input_dev->name = "Logitech WingMan Warrior"; + input_dev->phys = warrior->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_WARRIOR; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = warrior; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2); + input_dev->relbit[0] = BIT(REL_DIAL); + input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 8); + input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8); + input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); serio_set_drvdata(serio, warrior); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(warrior); - return err; - } - - input_register_device(&warrior->dev); - - printk(KERN_INFO "input: Logitech WingMan Warrior on %s\n", serio->phys); + if (err) + goto fail; + input_register_device(warrior->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(warrior); + return err; } /* -- cgit v1.2.3 From 051b2feaa4a92592d160dcb8715cc4a5faaaa52f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:54 -0500 Subject: [PATCH] Input: show sysfs path in /proc/bus/input/devices Input: show sysfs path in /proc/bus/input/devices Show that sysfs and phys path are different objects. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 0e2e890c0988..ceaed631d49f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -475,17 +475,21 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int { struct input_dev *dev; struct input_handle *handle; + const char *path; off_t at = 0; int i, len, cnt = 0; list_for_each_entry(dev, &input_dev_list, node) { + path = dev->dynalloc ? kobject_get_path(&dev->cdev.kobj, GFP_KERNEL) : NULL; + len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n", dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version); len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : ""); len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : ""); + len += sprintf(buf + len, "S: Sysfs=%s\n", path ? path : ""); len += sprintf(buf + len, "H: Handlers="); list_for_each_entry(handle, &dev->h_list, d_node) @@ -516,6 +520,8 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int if (cnt >= count) break; } + + kfree(path); } if (&dev->node == &input_dev_list) -- cgit v1.2.3 From 5c1e9a6a6ab2f4c60462cecb7773860a62d86e39 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:55 -0500 Subject: [PATCH] Input: export input_dev data via sysfs attributes Input: export various input device attributes via sysfs The following structure is exported: input0/ |-- name |-- phys |-- uniq |-- id/{bustype|vendor|product|version} `-- capabilities/{ev|abs|rel|key|led|msc|ff|sw} Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 156 ++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 133 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index ceaed631d49f..57fbfd907157 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -434,6 +434,23 @@ static void input_call_hotplug(char *verb, struct input_dev *dev) #endif +static int input_print_bitmap(char *buf, unsigned long *bitmap, int max) +{ + int i; + int len = 0; + + for (i = NBITS(max) - 1; i > 0; i--) + if (bitmap[i]) + break; + + for (; i >= 0; i--) + len += sprintf(buf + len, "%lx%s", bitmap[i], i > 0 ? " " : ""); + + len += sprintf(buf + len, "\n"); + + return len; +} + #ifdef CONFIG_PROC_FS static struct proc_dir_entry *proc_bus_input_dir; @@ -455,20 +472,17 @@ static unsigned int input_devices_poll(struct file *file, poll_table *wait) return 0; } -#define SPRINTF_BIT_B(bit, name, max) \ - do { \ - len += sprintf(buf + len, "B: %s", name); \ - for (i = NBITS(max) - 1; i >= 0; i--) \ - if (dev->bit[i]) break; \ - for (; i >= 0; i--) \ - len += sprintf(buf + len, "%lx ", dev->bit[i]); \ - len += sprintf(buf + len, "\n"); \ +#define SPRINTF_BIT_B(ev, bm) \ + do { \ + len += sprintf(buf + len, "B: %s=", #ev); \ + len += input_print_bitmap(buf + len, \ + dev->bm##bit, ev##_MAX); \ } while (0) -#define SPRINTF_BIT_B2(bit, name, max, ev) \ - do { \ - if (test_bit(ev, dev->evbit)) \ - SPRINTF_BIT_B(bit, name, max); \ +#define SPRINTF_BIT_B2(ev, bm) \ + do { \ + if (test_bit(EV_##ev, dev->evbit)) \ + SPRINTF_BIT_B(ev, bm); \ } while (0) static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data) @@ -478,7 +492,7 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int const char *path; off_t at = 0; - int i, len, cnt = 0; + int len, cnt = 0; list_for_each_entry(dev, &input_dev_list, node) { @@ -497,15 +511,15 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int len += sprintf(buf + len, "\n"); - SPRINTF_BIT_B(evbit, "EV=", EV_MAX); - SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY); - SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL); - SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS); - SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC); - SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED); - SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND); - SPRINTF_BIT_B2(ffbit, "FF=", FF_MAX, EV_FF); - SPRINTF_BIT_B2(swbit, "SW=", SW_MAX, EV_SW); + SPRINTF_BIT_B(EV, ev); + SPRINTF_BIT_B2(KEY, key); + SPRINTF_BIT_B2(REL, rel); + SPRINTF_BIT_B2(ABS, abs); + SPRINTF_BIT_B2(MSC, msc); + SPRINTF_BIT_B2(LED, led); + SPRINTF_BIT_B2(SND, snd); + SPRINTF_BIT_B2(FF, ff); + SPRINTF_BIT_B2(SW, sw); len += sprintf(buf + len, "\n"); @@ -612,6 +626,96 @@ static inline int input_proc_init(void) { return 0; } static inline void input_proc_exit(void) { } #endif +#define INPUT_DEV_STRING_ATTR_SHOW(name) \ +static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + int retval; \ + \ + retval = down_interruptible(&input_dev->sem); \ + if (retval) \ + return retval; \ + \ + retval = sprintf(buf, "%s\n", input_dev->name ? input_dev->name : ""); \ + \ + up(&input_dev->sem); \ + \ + return retval; \ +} + +INPUT_DEV_STRING_ATTR_SHOW(name); +INPUT_DEV_STRING_ATTR_SHOW(phys); +INPUT_DEV_STRING_ATTR_SHOW(uniq); + +static struct class_device_attribute input_dev_attrs[] = { + __ATTR(name, S_IRUGO, input_dev_show_name, NULL), + __ATTR(phys, S_IRUGO, input_dev_show_phys, NULL), + __ATTR(uniq, S_IRUGO, input_dev_show_uniq, NULL), + __ATTR_NULL +}; + +#define INPUT_DEV_ID_ATTR(name) \ +static ssize_t input_dev_show_id_##name(struct class_device *dev, char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + return sprintf(buf, "%04x\n", input_dev->id.name); \ +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL); + +INPUT_DEV_ID_ATTR(bustype); +INPUT_DEV_ID_ATTR(vendor); +INPUT_DEV_ID_ATTR(product); +INPUT_DEV_ID_ATTR(version); + +static struct attribute *input_dev_id_attrs[] = { + &class_device_attr_bustype.attr, + &class_device_attr_vendor.attr, + &class_device_attr_product.attr, + &class_device_attr_version.attr, + NULL +}; + +static struct attribute_group input_dev_id_attr_group = { + .name = "id", + .attrs = input_dev_id_attrs, +}; + +#define INPUT_DEV_CAP_ATTR(ev, bm) \ +static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + return input_print_bitmap(buf, input_dev->bm##bit, ev##_MAX); \ +} \ +static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL); + +INPUT_DEV_CAP_ATTR(EV, ev); +INPUT_DEV_CAP_ATTR(KEY, key); +INPUT_DEV_CAP_ATTR(REL, rel); +INPUT_DEV_CAP_ATTR(ABS, abs); +INPUT_DEV_CAP_ATTR(MSC, msc); +INPUT_DEV_CAP_ATTR(LED, led); +INPUT_DEV_CAP_ATTR(SND, snd); +INPUT_DEV_CAP_ATTR(FF, ff); +INPUT_DEV_CAP_ATTR(SW, sw); + +static struct attribute *input_dev_caps_attrs[] = { + &class_device_attr_ev.attr, + &class_device_attr_key.attr, + &class_device_attr_rel.attr, + &class_device_attr_abs.attr, + &class_device_attr_msc.attr, + &class_device_attr_led.attr, + &class_device_attr_snd.attr, + &class_device_attr_ff.attr, + &class_device_attr_sw.attr, + NULL +}; + +static struct attribute_group input_dev_caps_attr_group = { + .name = "capabilities", + .attrs = input_dev_caps_attrs, +}; + static void input_dev_release(struct class_device *class_dev) { struct input_dev *dev = to_input_dev(class_dev); @@ -623,6 +727,7 @@ static void input_dev_release(struct class_device *class_dev) static struct class input_dev_class = { .name = "input_dev", .release = input_dev_release, + .class_dev_attrs = input_dev_attrs, }; struct input_dev *input_allocate_device(void) @@ -660,6 +765,8 @@ static void input_register_classdevice(struct input_dev *dev) kfree(path); class_device_add(&dev->cdev); + sysfs_create_group(&dev->cdev.kobj, &input_dev_id_attr_group); + sysfs_create_group(&dev->cdev.kobj, &input_dev_caps_attr_group); } void input_register_device(struct input_dev *dev) @@ -726,8 +833,11 @@ void input_unregister_device(struct input_dev *dev) list_del_init(&dev->node); - if (dev->dynalloc) + if (dev->dynalloc) { + sysfs_remove_group(&dev->cdev.kobj, &input_dev_caps_attr_group); + sysfs_remove_group(&dev->cdev.kobj, &input_dev_id_attr_group); class_device_unregister(&dev->cdev); + } input_wakeup_procfs_readers(); } -- cgit v1.2.3 From 102040204f1949562406b72007c14a2a241cb0d9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: register the input class device sooner This is needed so we can actually use the class device within the input handlers. Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 57fbfd907157..03c2ca404f20 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -795,6 +795,9 @@ void input_register_device(struct input_dev *dev) INIT_LIST_HEAD(&dev->h_list); list_add_tail(&dev->node, &input_dev_list); + if (dev->dynalloc) + input_register_classdevice(dev); + list_for_each_entry(handler, &input_handler_list, node) if (!handler->blacklist || !input_match_device(handler->blacklist, dev)) if ((id = input_match_device(handler->id_table, dev))) @@ -802,9 +805,6 @@ void input_register_device(struct input_dev *dev) input_link_handle(handle); - if (dev->dynalloc) - input_register_classdevice(dev); - #ifdef CONFIG_HOTPLUG input_call_hotplug("add", dev); #endif -- cgit v1.2.3 From 23d50901617c2a8bdef509279a42d2e90f523db9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: export input_dev_class so that input drivers can use it. Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 3 ++- include/linux/input.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 03c2ca404f20..b0ede4cc72b7 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -40,6 +40,7 @@ EXPORT_SYMBOL(input_accept_process); EXPORT_SYMBOL(input_flush_device); EXPORT_SYMBOL(input_event); EXPORT_SYMBOL(input_class); +EXPORT_SYMBOL_GPL(input_dev_class); #define INPUT_DEVICES 256 @@ -724,7 +725,7 @@ static void input_dev_release(struct class_device *class_dev) module_put(THIS_MODULE); } -static struct class input_dev_class = { +struct class input_dev_class = { .name = "input_dev", .release = input_dev_release, .class_dev_attrs = input_dev_attrs, diff --git a/include/linux/input.h b/include/linux/input.h index 3defa29a17d3..5de844157fa9 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1075,6 +1075,7 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min } extern struct class *input_class; +extern struct class input_dev_class; #endif #endif -- cgit v1.2.3 From 967ca692161d8c4e894932599592af8d62c0a895 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: move the input class devices under their new input_dev devices Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 6 +++--- drivers/input/joydev.c | 6 +++--- drivers/input/mousedev.c | 10 +++++----- drivers/input/tsdev.c | 6 +++--- 4 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 14ea57f963bb..579041ded4be 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -686,9 +686,9 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), - dev->dev, "event%d", minor); + dev->cdev.dev, "event%d", minor); return &evdev->handle; } @@ -698,7 +698,7 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev *evdev = handle->private; struct evdev_list *list; - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 40d2b46cbc79..9c17d1add260 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -513,9 +513,9 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), - dev->dev, "js%d", minor); + dev->cdev.dev, "js%d", minor); return &joydev->handle; } @@ -525,7 +525,7 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev *joydev = handle->private; struct joydev_list *list; - class_device_destroy(input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; if (joydev->open) { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 89c3e496f1ed..5ec6291e967f 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -648,9 +648,9 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), - dev->dev, "mouse%d", minor); + dev->cdev.dev, "mouse%d", minor); return &mousedev->handle; } @@ -660,7 +660,7 @@ static void mousedev_disconnect(struct input_handle *handle) struct mousedev *mousedev = handle->private; struct mousedev_list *list; - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); mousedev->exist = 0; @@ -734,7 +734,7 @@ static int __init mousedev_init(void) mousedev_mix.exist = 1; mousedev_mix.minor = MOUSEDEV_MIX; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX @@ -753,7 +753,7 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); } diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 2d45e4df4163..0581edb9a560 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -409,9 +409,9 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), - dev->dev, "ts%d", minor); + dev->cdev.dev, "ts%d", minor); return &tsdev->handle; } @@ -421,7 +421,7 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev *tsdev = handle->private; struct tsdev_list *list; - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; -- cgit v1.2.3 From 629b77a42c39c8b3c42a8cf5f5680f0406f8d43f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: Fix oops when accessing sysfs files of nested input devices Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index b0ede4cc72b7..0d570cf92dc2 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -642,17 +642,22 @@ static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \ up(&input_dev->sem); \ \ return retval; \ -} +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL); INPUT_DEV_STRING_ATTR_SHOW(name); INPUT_DEV_STRING_ATTR_SHOW(phys); INPUT_DEV_STRING_ATTR_SHOW(uniq); -static struct class_device_attribute input_dev_attrs[] = { - __ATTR(name, S_IRUGO, input_dev_show_name, NULL), - __ATTR(phys, S_IRUGO, input_dev_show_phys, NULL), - __ATTR(uniq, S_IRUGO, input_dev_show_uniq, NULL), - __ATTR_NULL +static struct attribute *input_dev_attrs[] = { + &class_device_attr_name.attr, + &class_device_attr_phys.attr, + &class_device_attr_uniq.attr, + NULL +}; + +static struct attribute_group input_dev_group = { + .attrs = input_dev_attrs, }; #define INPUT_DEV_ID_ATTR(name) \ @@ -728,7 +733,6 @@ static void input_dev_release(struct class_device *class_dev) struct class input_dev_class = { .name = "input_dev", .release = input_dev_release, - .class_dev_attrs = input_dev_attrs, }; struct input_dev *input_allocate_device(void) @@ -766,6 +770,7 @@ static void input_register_classdevice(struct input_dev *dev) kfree(path); class_device_add(&dev->cdev); + sysfs_create_group(&dev->cdev.kobj, &input_dev_group); sysfs_create_group(&dev->cdev.kobj, &input_dev_id_attr_group); sysfs_create_group(&dev->cdev.kobj, &input_dev_caps_attr_group); } -- cgit v1.2.3 From b0fdfebb205fcbf394c3db39679a766b8fc4f07d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: remove the input_class structure, as it is unused. Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 18 +++--------------- include/linux/input.h | 1 - 2 files changed, 3 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 0d570cf92dc2..5c9044dbf00e 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -39,7 +39,6 @@ EXPORT_SYMBOL(input_close_device); EXPORT_SYMBOL(input_accept_process); EXPORT_SYMBOL(input_flush_device); EXPORT_SYMBOL(input_event); -EXPORT_SYMBOL(input_class); EXPORT_SYMBOL_GPL(input_dev_class); #define INPUT_DEVICES 256 @@ -927,8 +926,6 @@ static struct file_operations input_fops = { .open = input_open_file, }; -struct class *input_class; - static int __init input_init(void) { int err; @@ -939,27 +936,19 @@ static int __init input_init(void) return err; } - input_class = class_create(THIS_MODULE, "input"); - if (IS_ERR(input_class)) { - printk(KERN_ERR "input: unable to register input class\n"); - err = PTR_ERR(input_class); - goto fail1; - } - err = input_proc_init(); if (err) - goto fail2; + goto fail1; err = register_chrdev(INPUT_MAJOR, "input", &input_fops); if (err) { printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR); - goto fail3; + goto fail2; } return 0; - fail3: input_proc_exit(); - fail2: class_destroy(input_class); + fail2: input_proc_exit(); fail1: class_unregister(&input_dev_class); return err; } @@ -968,7 +957,6 @@ static void __exit input_exit(void) { input_proc_exit(); unregister_chrdev(INPUT_MAJOR, "input"); - class_destroy(input_class); class_unregister(&input_dev_class); } diff --git a/include/linux/input.h b/include/linux/input.h index 5de844157fa9..256e88755f12 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1074,7 +1074,6 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min dev->absbit[LONG(axis)] |= BIT(axis); } -extern struct class *input_class; extern struct class input_dev_class; #endif -- cgit v1.2.3 From ea9f240bd819f9299703283e5326da606bbb4b05 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: rename input_dev_class to input_class to be correct. Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 4 ++-- drivers/input/input.c | 14 +++++++------- drivers/input/joydev.c | 4 ++-- drivers/input/mousedev.c | 8 ++++---- drivers/input/tsdev.c | 4 ++-- include/linux/input.h | 2 +- 6 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 579041ded4be..2a96b260a2a8 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -686,7 +686,7 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), dev->cdev.dev, "event%d", minor); @@ -698,7 +698,7 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev *evdev = handle->private; struct evdev_list *list; - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; diff --git a/drivers/input/input.c b/drivers/input/input.c index 5c9044dbf00e..a8f65fa7e17a 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -39,7 +39,7 @@ EXPORT_SYMBOL(input_close_device); EXPORT_SYMBOL(input_accept_process); EXPORT_SYMBOL(input_flush_device); EXPORT_SYMBOL(input_event); -EXPORT_SYMBOL_GPL(input_dev_class); +EXPORT_SYMBOL_GPL(input_class); #define INPUT_DEVICES 256 @@ -729,8 +729,8 @@ static void input_dev_release(struct class_device *class_dev) module_put(THIS_MODULE); } -struct class input_dev_class = { - .name = "input_dev", +struct class input_class = { + .name = "input", .release = input_dev_release, }; @@ -741,7 +741,7 @@ struct input_dev *input_allocate_device(void) dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); if (dev) { dev->dynalloc = 1; - dev->cdev.class = &input_dev_class; + dev->cdev.class = &input_class; class_device_initialize(&dev->cdev); INIT_LIST_HEAD(&dev->h_list); INIT_LIST_HEAD(&dev->node); @@ -930,7 +930,7 @@ static int __init input_init(void) { int err; - err = class_register(&input_dev_class); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); return err; @@ -949,7 +949,7 @@ static int __init input_init(void) return 0; fail2: input_proc_exit(); - fail1: class_unregister(&input_dev_class); + fail1: class_unregister(&input_class); return err; } @@ -957,7 +957,7 @@ static void __exit input_exit(void) { input_proc_exit(); unregister_chrdev(INPUT_MAJOR, "input"); - class_unregister(&input_dev_class); + class_unregister(&input_class); } subsys_initcall(input_init); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 9c17d1add260..25f7eba4761f 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -513,7 +513,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), dev->cdev.dev, "js%d", minor); @@ -525,7 +525,7 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev *joydev = handle->private; struct joydev_list *list; - class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; if (joydev->open) { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 5ec6291e967f..de2808fc85b3 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -648,7 +648,7 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), dev->cdev.dev, "mouse%d", minor); @@ -660,7 +660,7 @@ static void mousedev_disconnect(struct input_handle *handle) struct mousedev *mousedev = handle->private; struct mousedev_list *list; - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); mousedev->exist = 0; @@ -734,7 +734,7 @@ static int __init mousedev_init(void) mousedev_mix.exist = 1; mousedev_mix.minor = MOUSEDEV_MIX; - class_device_create(&input_dev_class, NULL, + class_device_create(&input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX @@ -753,7 +753,7 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); } diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 0581edb9a560..75e165736655 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -409,7 +409,7 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), dev->cdev.dev, "ts%d", minor); @@ -421,7 +421,7 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev *tsdev = handle->private; struct tsdev_list *list; - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; diff --git a/include/linux/input.h b/include/linux/input.h index 256e88755f12..e3d9c08b5cbe 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1074,7 +1074,7 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min dev->absbit[LONG(axis)] |= BIT(axis); } -extern struct class input_dev_class; +extern struct class input_class; #endif #endif -- cgit v1.2.3 From c9bcd582dfeec845b83bc948a430c9958bf839e6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH] INPUT: Create symlinks for backwards compatibility This creates symlinks in /sys/class/input/ to the nested class devices to help userspace cope with the nesting. Unfortunatly udev still needs to be updated as it can't handle symlinks properly here :( Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 10 ++++++++-- drivers/input/joydev.c | 10 ++++++++-- drivers/input/mousedev.c | 10 ++++++++-- drivers/input/tsdev.c | 10 ++++++++-- 4 files changed, 32 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 2a96b260a2a8..a4696cd0978c 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -661,6 +661,7 @@ static struct file_operations evdev_fops = { static struct input_handle *evdev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id) { struct evdev *evdev; + struct class_device *cdev; int minor; for (minor = 0; minor < EVDEV_MINORS && evdev_table[minor]; minor++); @@ -686,9 +687,13 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), - dev->cdev.dev, "event%d", minor); + dev->cdev.dev, evdev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + evdev->name); return &evdev->handle; } @@ -698,6 +703,7 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev *evdev = handle->private; struct evdev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, evdev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 25f7eba4761f..20e2972b9204 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -448,6 +448,7 @@ static struct file_operations joydev_fops = { static struct input_handle *joydev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id) { struct joydev *joydev; + struct class_device *cdev; int i, j, t, minor; for (minor = 0; minor < JOYDEV_MINORS && joydev_table[minor]; minor++); @@ -513,9 +514,13 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), - dev->cdev.dev, "js%d", minor); + dev->cdev.dev, joydev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + joydev->name); return &joydev->handle; } @@ -525,6 +530,7 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev *joydev = handle->private; struct joydev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, joydev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index de2808fc85b3..2d0af44ac4b9 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -620,6 +620,7 @@ static struct file_operations mousedev_fops = { static struct input_handle *mousedev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id) { struct mousedev *mousedev; + struct class_device *cdev; int minor = 0; for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++); @@ -648,9 +649,13 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), - dev->cdev.dev, "mouse%d", minor); + dev->cdev.dev, mousedev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + mousedev->name); return &mousedev->handle; } @@ -660,6 +665,7 @@ static void mousedev_disconnect(struct input_handle *handle) struct mousedev *mousedev = handle->private; struct mousedev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, mousedev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); mousedev->exist = 0; diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 75e165736655..ca1547929d62 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -368,6 +368,7 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, struct input_device_id *id) { struct tsdev *tsdev; + struct class_device *cdev; int minor, delta; for (minor = 0; minor < TSDEV_MINORS/2 && tsdev_table[minor]; @@ -409,9 +410,13 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), - dev->cdev.dev, "ts%d", minor); + dev->cdev.dev, tsdev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + tsdev->name); return &tsdev->handle; } @@ -421,6 +426,7 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev *tsdev = handle->private; struct tsdev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, tsdev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; -- cgit v1.2.3 From a7fadbe10ccf430e7a8add8b45c561d864087343 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:57 -0500 Subject: [PATCH] input core: remove custom-made hotplug handler Input: remove custom-made hotplug handler Now that all input devices are registered with sysfs we can remove old custom-made hotplug handler and crate a standard one. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 249 +++++++++++++++++++++----------------------------- 1 file changed, 104 insertions(+), 145 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index a8f65fa7e17a..3b1685ff9d10 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -316,125 +316,7 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st return NULL; } - -/* - * Input hotplugging interface - loading event handlers based on - * device bitfields. - */ - -#ifdef CONFIG_HOTPLUG - -/* - * Input hotplugging invokes what /proc/sys/kernel/hotplug says - * (normally /sbin/hotplug) when input devices get added or removed. - * - * This invokes a user mode policy agent, typically helping to load driver - * or other modules, configure the device, and more. Drivers can provide - * a MODULE_DEVICE_TABLE to help with module loading subtasks. - * - */ - -#define SPRINTF_BIT_A(bit, name, max) \ - do { \ - envp[i++] = scratch; \ - scratch += sprintf(scratch, name); \ - for (j = NBITS(max) - 1; j >= 0; j--) \ - if (dev->bit[j]) break; \ - for (; j >= 0; j--) \ - scratch += sprintf(scratch, "%lx ", dev->bit[j]); \ - scratch++; \ - } while (0) - -#define SPRINTF_BIT_A2(bit, name, max, ev) \ - do { \ - if (test_bit(ev, dev->evbit)) \ - SPRINTF_BIT_A(bit, name, max); \ - } while (0) - -static void input_call_hotplug(char *verb, struct input_dev *dev) -{ - char *argv[3], **envp, *buf, *scratch; - int i = 0, j, value; - - if (!hotplug_path[0]) { - printk(KERN_ERR "input.c: calling hotplug without a hotplug agent defined\n"); - return; - } - if (in_interrupt()) { - printk(KERN_ERR "input.c: calling hotplug from interrupt\n"); - return; - } - if (!current->fs->root) { - printk(KERN_WARNING "input.c: calling hotplug without valid filesystem\n"); - return; - } - if (!(envp = (char **) kmalloc(20 * sizeof(char *), GFP_KERNEL))) { - printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n"); - return; - } - if (!(buf = kmalloc(1024, GFP_KERNEL))) { - kfree (envp); - printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n"); - return; - } - - argv[0] = hotplug_path; - argv[1] = "input"; - argv[2] = NULL; - - envp[i++] = "HOME=/"; - envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; - - scratch = buf; - - envp[i++] = scratch; - scratch += sprintf(scratch, "ACTION=%s", verb) + 1; - - envp[i++] = scratch; - scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x", - dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1; - - if (dev->name) { - envp[i++] = scratch; - scratch += sprintf(scratch, "NAME=%s", dev->name) + 1; - } - - if (dev->phys) { - envp[i++] = scratch; - scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1; - } - - SPRINTF_BIT_A(evbit, "EV=", EV_MAX); - SPRINTF_BIT_A2(keybit, "KEY=", KEY_MAX, EV_KEY); - SPRINTF_BIT_A2(relbit, "REL=", REL_MAX, EV_REL); - SPRINTF_BIT_A2(absbit, "ABS=", ABS_MAX, EV_ABS); - SPRINTF_BIT_A2(mscbit, "MSC=", MSC_MAX, EV_MSC); - SPRINTF_BIT_A2(ledbit, "LED=", LED_MAX, EV_LED); - SPRINTF_BIT_A2(sndbit, "SND=", SND_MAX, EV_SND); - SPRINTF_BIT_A2(ffbit, "FF=", FF_MAX, EV_FF); - SPRINTF_BIT_A2(swbit, "SW=", SW_MAX, EV_SW); - - envp[i++] = NULL; - -#ifdef INPUT_DEBUG - printk(KERN_DEBUG "input.c: calling %s %s [%s %s %s %s %s]\n", - argv[0], argv[1], envp[0], envp[1], envp[2], envp[3], envp[4]); -#endif - - value = call_usermodehelper(argv [0], argv, envp, 0); - - kfree(buf); - kfree(envp); - -#ifdef INPUT_DEBUG - if (value != 0) - printk(KERN_DEBUG "input.c: hotplug returned %d\n", value); -#endif -} - -#endif - -static int input_print_bitmap(char *buf, unsigned long *bitmap, int max) +static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, int max) { int i; int len = 0; @@ -444,10 +326,8 @@ static int input_print_bitmap(char *buf, unsigned long *bitmap, int max) break; for (; i >= 0; i--) - len += sprintf(buf + len, "%lx%s", bitmap[i], i > 0 ? " " : ""); - - len += sprintf(buf + len, "\n"); - + len += snprintf(buf + len, max(buf_size - len, 0), + "%lx%s", bitmap[i], i > 0 ? " " : ""); return len; } @@ -472,17 +352,18 @@ static unsigned int input_devices_poll(struct file *file, poll_table *wait) return 0; } -#define SPRINTF_BIT_B(ev, bm) \ +#define SPRINTF_BIT(ev, bm) \ do { \ len += sprintf(buf + len, "B: %s=", #ev); \ - len += input_print_bitmap(buf + len, \ + len += input_print_bitmap(buf + len, INT_MAX, \ dev->bm##bit, ev##_MAX); \ + len += sprintf(buf + len, "\n"); \ } while (0) -#define SPRINTF_BIT_B2(ev, bm) \ +#define TEST_AND_SPRINTF_BIT(ev, bm) \ do { \ if (test_bit(EV_##ev, dev->evbit)) \ - SPRINTF_BIT_B(ev, bm); \ + SPRINTF_BIT(ev, bm); \ } while (0) static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data) @@ -511,15 +392,15 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int len += sprintf(buf + len, "\n"); - SPRINTF_BIT_B(EV, ev); - SPRINTF_BIT_B2(KEY, key); - SPRINTF_BIT_B2(REL, rel); - SPRINTF_BIT_B2(ABS, abs); - SPRINTF_BIT_B2(MSC, msc); - SPRINTF_BIT_B2(LED, led); - SPRINTF_BIT_B2(SND, snd); - SPRINTF_BIT_B2(FF, ff); - SPRINTF_BIT_B2(SW, sw); + SPRINTF_BIT(EV, ev); + TEST_AND_SPRINTF_BIT(KEY, key); + TEST_AND_SPRINTF_BIT(REL, rel); + TEST_AND_SPRINTF_BIT(ABS, abs); + TEST_AND_SPRINTF_BIT(MSC, msc); + TEST_AND_SPRINTF_BIT(LED, led); + TEST_AND_SPRINTF_BIT(SND, snd); + TEST_AND_SPRINTF_BIT(FF, ff); + TEST_AND_SPRINTF_BIT(SW, sw); len += sprintf(buf + len, "\n"); @@ -689,7 +570,7 @@ static struct attribute_group input_dev_id_attr_group = { static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \ { \ struct input_dev *input_dev = to_input_dev(dev); \ - return input_print_bitmap(buf, input_dev->bm##bit, ev##_MAX); \ + return input_print_bitmap(buf, PAGE_SIZE, input_dev->bm##bit, ev##_MAX);\ } \ static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL); @@ -729,9 +610,95 @@ static void input_dev_release(struct class_device *class_dev) module_put(THIS_MODULE); } +/* + * Input hotplugging interface - loading event handlers based on + * device bitfields. + */ +static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index, + char *buffer, int buffer_size, int *cur_len, + const char *name, unsigned long *bitmap, int max) +{ + if (*cur_index >= num_envp - 1) + return -ENOMEM; + + envp[*cur_index] = buffer + *cur_len; + + *cur_len += snprintf(buffer + *cur_len, max(buffer_size - *cur_len, 0), name); + if (*cur_len > buffer_size) + return -ENOMEM; + + *cur_len += input_print_bitmap(buffer + *cur_len, + max(buffer_size - *cur_len, 0), + bitmap, max) + 1; + if (*cur_len > buffer_size) + return -ENOMEM; + + (*cur_index)++; + return 0; +} + +#define INPUT_ADD_HOTPLUG_VAR(fmt, val...) \ + do { \ + int err = add_hotplug_env_var(envp, num_envp, &i, \ + buffer, buffer_size, &len, \ + fmt, val); \ + if (err) \ + return err; \ + } while (0) + +#define INPUT_ADD_HOTPLUG_BM_VAR(name, bm, max) \ + do { \ + int err = input_add_hotplug_bm_var(envp, num_envp, &i, \ + buffer, buffer_size, &len, \ + name, bm, max); \ + if (err) \ + return err; \ + } while (0) + +static int input_dev_hotplug(struct class_device *cdev, char **envp, + int num_envp, char *buffer, int buffer_size) +{ + struct input_dev *dev = to_input_dev(cdev); + int i = 0; + int len = 0; + + INPUT_ADD_HOTPLUG_VAR("PRODUCT=%x/%x/%x/%x", + dev->id.bustype, dev->id.vendor, + dev->id.product, dev->id.version); + if (dev->name) + INPUT_ADD_HOTPLUG_VAR("NAME=\"%s\"", dev->name); + if (dev->phys) + INPUT_ADD_HOTPLUG_VAR("PHYS=\"%s\"", dev->phys); + if (dev->phys) + INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq); + + INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX); + if (test_bit(EV_KEY, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX); + if (test_bit(EV_REL, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("REL=", dev->relbit, REL_MAX); + if (test_bit(EV_ABS, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("ABS=", dev->absbit, ABS_MAX); + if (test_bit(EV_MSC, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("MSC=", dev->mscbit, MSC_MAX); + if (test_bit(EV_LED, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("LED=", dev->ledbit, LED_MAX); + if (test_bit(EV_SND, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("SND=", dev->sndbit, SND_MAX); + if (test_bit(EV_FF, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("FF=", dev->ffbit, FF_MAX); + if (test_bit(EV_SW, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("SW=", dev->swbit, SW_MAX); + + envp[i] = NULL; + + return 0; +} + struct class input_class = { .name = "input", .release = input_dev_release, + .hotplug = input_dev_hotplug, }; struct input_dev *input_allocate_device(void) @@ -810,10 +777,6 @@ void input_register_device(struct input_dev *dev) input_link_handle(handle); -#ifdef CONFIG_HOTPLUG - input_call_hotplug("add", dev); -#endif - input_wakeup_procfs_readers(); } @@ -832,10 +795,6 @@ void input_unregister_device(struct input_dev *dev) handle->handler->disconnect(handle); } -#ifdef CONFIG_HOTPLUG - input_call_hotplug("remove", dev); -#endif - list_del_init(&dev->node); if (dev->dynalloc) { -- cgit v1.2.3 From a1bdc7aad8b557176ccecff1da137ebe3090871e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 Oct 2005 17:54:41 +0100 Subject: [PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/base/attribute_container.c | 2 ++ drivers/base/base.h | 12 ++++++++++++ drivers/base/cpu.c | 1 + drivers/base/firmware.c | 3 +++ drivers/base/init.c | 10 ++-------- drivers/base/platform.c | 2 ++ 6 files changed, 22 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c index 6b2eb6f39b4d..2a7d7ae83e1e 100644 --- a/drivers/base/attribute_container.c +++ b/drivers/base/attribute_container.c @@ -19,6 +19,8 @@ #include #include +#include "base.h" + /* This is a private structure used to tie the classdev and the * container .. it should never be visible outside this file */ struct internal_container { diff --git a/drivers/base/base.h b/drivers/base/base.h index 783752b68a9a..e3b548d46cff 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -1,3 +1,15 @@ + +/* initialisation functions */ + +extern int devices_init(void); +extern int buses_init(void); +extern int classes_init(void); +extern int firmware_init(void); +extern int platform_bus_init(void); +extern int system_bus_init(void); +extern int cpu_dev_init(void); +extern int attribute_container_init(void); + extern int bus_add_device(struct device * dev); extern void bus_remove_device(struct device * dev); diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index b79badd0f158..081c927b1ed8 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -9,6 +9,7 @@ #include #include +#include "base.h" struct sysdev_class cpu_sysdev_class = { set_kset_name("cpu"), diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index 88ab044932f2..cb1b98ae0d58 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -11,6 +11,9 @@ #include #include #include +#include + +#include "base.h" static decl_subsys(firmware, NULL, NULL); diff --git a/drivers/base/init.c b/drivers/base/init.c index a76ae5a221f3..84e604e25c4f 100644 --- a/drivers/base/init.c +++ b/drivers/base/init.c @@ -10,14 +10,8 @@ #include #include -extern int devices_init(void); -extern int buses_init(void); -extern int classes_init(void); -extern int firmware_init(void); -extern int platform_bus_init(void); -extern int system_bus_init(void); -extern int cpu_dev_init(void); -extern int attribute_container_init(void); +#include "base.h" + /** * driver_init - initialize driver model. * diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 361e204209eb..a1a56ff65b76 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -17,6 +17,8 @@ #include #include +#include "base.h" + struct device platform_bus = { .bus_id = "platform", }; -- cgit v1.2.3 From 9480e307cd88ef09ec9294c7d97ebec18e6d2221 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 09:52:56 -0700 Subject: [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/driver.txt | 60 ++--------------------------------- arch/arm/common/locomo.c | 10 ++---- arch/arm/common/sa1111.c | 11 ++----- arch/arm/common/scoop.c | 24 +++++++------- arch/arm/mach-pxa/corgi_ssp.c | 24 +++++++------- arch/arm/mach-sa1100/neponset.c | 30 +++++++----------- drivers/base/platform.c | 20 ++++-------- drivers/char/s3c2410-rtc.c | 20 ++++++------ drivers/char/sonypi.c | 14 ++++---- drivers/char/watchdog/s3c2410_wdt.c | 30 ++++++++---------- drivers/hwmon/hdaps.c | 6 ++-- drivers/i2c/busses/i2c-s3c2410.c | 8 ++--- drivers/i2c/i2c-core.c | 4 +-- drivers/ieee1394/nodemgr.c | 4 +-- drivers/input/keyboard/corgikbd.c | 22 ++++++------- drivers/input/keyboard/spitzkbd.c | 40 +++++++++++------------ drivers/input/serio/i8042.c | 13 +++----- drivers/input/touchscreen/corgi_ts.c | 38 +++++++++++----------- drivers/media/video/msp3400.c | 8 ++--- drivers/media/video/tda9887.c | 4 +-- drivers/media/video/tuner-core.c | 4 +-- drivers/mfd/mcp-sa11x0.c | 20 ++++++------ drivers/mmc/pxamci.c | 8 ++--- drivers/mmc/wbsd.c | 4 +-- drivers/mtd/maps/sa1100-flash.c | 8 ++--- drivers/net/dm9000.c | 8 ++--- drivers/net/irda/sa1100_ir.c | 8 ++--- drivers/net/irda/smsc-ircc2.c | 12 +++---- drivers/net/phy/mdio_bus.c | 20 ++++-------- drivers/net/smc91x.c | 8 ++--- drivers/pci/pcie/portdrv_core.c | 4 +-- drivers/pcmcia/au1000_generic.c | 21 ++---------- drivers/pcmcia/hd64465_ss.c | 20 ++---------- drivers/pcmcia/i82365.c | 20 ++---------- drivers/pcmcia/m32r_cfc.c | 21 ++---------- drivers/pcmcia/m32r_pcc.c | 21 ++---------- drivers/pcmcia/omap_cf.c | 18 ++--------- drivers/pcmcia/pxa2xx_base.c | 26 ++++----------- drivers/pcmcia/sa1100_generic.c | 20 ++---------- drivers/pcmcia/tcic.c | 20 ++---------- drivers/pcmcia/vrc4171_card.c | 24 ++------------ drivers/serial/8250.c | 10 ++---- drivers/serial/imx.c | 8 ++--- drivers/serial/mpc52xx_uart.c | 8 ++--- drivers/serial/pxa.c | 8 ++--- drivers/serial/s3c2410.c | 9 +++--- drivers/serial/sa1100.c | 8 ++--- drivers/serial/vr41xx_siu.c | 10 ++---- drivers/usb/gadget/dummy_hcd.c | 22 +++---------- drivers/usb/gadget/omap_udc.c | 9 ++---- drivers/usb/gadget/pxa2xx_udc.c | 17 +++++----- drivers/usb/host/isp116x-hcd.c | 14 +++----- drivers/usb/host/ohci-omap.c | 10 ++---- drivers/usb/host/ohci-pxa27x.c | 4 +-- drivers/usb/host/sl811-hcd.c | 10 ++---- drivers/video/backlight/corgi_bl.c | 10 +++--- drivers/video/imxfb.c | 10 +++--- drivers/video/pxafb.c | 10 +++--- drivers/video/s1d13xxxfb.c | 7 ++-- drivers/video/s3c2410fb.c | 27 +++++++--------- drivers/video/sa1100fb.c | 10 +++--- drivers/video/w100fb.c | 46 +++++++++++++-------------- include/linux/device.h | 17 ++-------- sound/arm/pxa2xx-ac97.c | 8 ++--- sound/core/init.c | 14 +++----- sound/pci/ac97/ac97_bus.c | 6 ++-- 66 files changed, 325 insertions(+), 692 deletions(-) (limited to 'drivers') diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index fabaca1ab1b0..7c26bfae4ba0 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -196,67 +196,11 @@ it into a supported low-power state. int (*suspend) (struct device * dev, pm_message_t state, u32 level); -suspend is called to put the device in a low power state. There are -several stages to successfully suspending a device, which is denoted in -the @level parameter. Breaking the suspend transition into several -stages affords the platform flexibility in performing device power -management based on the requirements of the system and the -user-defined policy. - -SUSPEND_NOTIFY notifies the device that a suspend transition is about -to happen. This happens on system power state transitions to verify -that all devices can successfully suspend. - -A driver may choose to fail on this call, which should cause the -entire suspend transition to fail. A driver should fail only if it -knows that the device will not be able to be resumed properly when the -system wakes up again. It could also fail if it somehow determines it -is in the middle of an operation too important to stop. - -SUSPEND_DISABLE tells the device to stop I/O transactions. When it -stops transactions, or what it should do with unfinished transactions -is a policy of the driver. After this call, the driver should not -accept any other I/O requests. - -SUSPEND_SAVE_STATE tells the device to save the context of the -hardware. This includes any bus-specific hardware state and -device-specific hardware state. A pointer to this saved state can be -stored in the device's saved_state field. - -SUSPEND_POWER_DOWN tells the driver to place the device in the low -power state requested. - -Whether suspend is called with a given level is a policy of the -platform. Some levels may be omitted; drivers must not assume the -reception of any level. However, all levels must be called in the -order above; i.e. notification will always come before disabling; -disabling the device will come before suspending the device. - -All calls are made with interrupts enabled, except for the -SUSPEND_POWER_DOWN level. +suspend is called to put the device in a low power state. int (*resume) (struct device * dev, u32 level); -Resume is used to bring a device back from a low power state. Like the -suspend transition, it happens in several stages. - -RESUME_POWER_ON tells the driver to set the power state to the state -before the suspend call (The device could have already been in a low -power state before the suspend call to put in a lower power state). - -RESUME_RESTORE_STATE tells the driver to restore the state saved by -the SUSPEND_SAVE_STATE suspend call. - -RESUME_ENABLE tells the driver to start accepting I/O transactions -again. Depending on driver policy, the device may already have pending -I/O requests. - -RESUME_POWER_ON is called with interrupts disabled. The other resume -levels are called with interrupts enabled. - -As with the various suspend stages, the driver must not assume that -any other resume calls have been or will be made. Each call should be -self-contained and not dependent on any external state. +Resume is used to bring a device back from a low power state. Attributes diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index e8053d16829b..5cdb4122f057 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -550,15 +550,12 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) +static int locomo_suspend(struct device *dev, pm_message_t state) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; unsigned long flags; - if (level != SUSPEND_DISABLE) - return 0; - save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); if (!save) return -ENOMEM; @@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int locomo_resume(struct device *dev, u32 level) +static int locomo_resume(struct device *dev) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; unsigned long r; unsigned long flags; - if (level != RESUME_ENABLE) - return 0; - save = (struct locomo_save_data *) dev->power.saved_state; if (!save) return 0; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 1a47fbf9cbbc..21e2a518ad3a 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -801,7 +801,7 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1111_suspend(struct device *dev, pm_message_t state) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; @@ -809,9 +809,6 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) unsigned int val; void __iomem *base; - if (level != SUSPEND_DISABLE) - return 0; - save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; @@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) /* * sa1111_resume - Restore the SA1111 device state. * @dev: device to restore - * @level: resume level * * Restore the general state of the SA1111; clock control and * interrupt controller. Other parts of the SA1111 must be * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct device *dev, u32 level) +static int sa1111_resume(struct device *dev) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; - if (level != RESUME_ENABLE) - return 0; - save = (struct sa1111_save_data *)dev->power.saved_state; if (!save) return 0; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 9e5245c702de..e8356b76d7c6 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -102,26 +102,24 @@ static void check_scoop_reg(struct scoop_dev *sdev) } #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int scoop_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = dev_get_drvdata(dev); + + check_scoop_reg(sdev); + sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); + SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; - check_scoop_reg(sdev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); - SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; - } return 0; } -static int scoop_resume(struct device *dev, uint32_t level) +static int scoop_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = dev_get_drvdata(dev); + + check_scoop_reg(sdev); + SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; - check_scoop_reg(sdev); - SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; - } return 0; } #else diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 0ef428287055..136c269db0b7 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -222,24 +222,22 @@ static int corgi_ssp_remove(struct device *dev) return 0; } -static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level) +static int corgi_ssp_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - } + ssp_flush(&corgi_ssp_dev); + ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); + return 0; } -static int corgi_ssp_resume(struct device *dev, u32 level) +static int corgi_ssp_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - } + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ + ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); + ssp_enable(&corgi_ssp_dev); + return 0; } diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index fc061641b7be..7609d69cf1cc 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev) /* * LDM power management. */ -static int neponset_suspend(struct device *dev, pm_message_t state, u32 level) +static int neponset_suspend(struct device *dev, pm_message_t state) { /* * Save state. */ - if (level == SUSPEND_SAVE_STATE || - level == SUSPEND_DISABLE || - level == SUSPEND_POWER_DOWN) { - if (!dev->power.saved_state) - dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); - if (!dev->power.saved_state) - return -ENOMEM; - - *(unsigned int *)dev->power.saved_state = NCR_0; - } + if (!dev->power.saved_state) + dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); + if (!dev->power.saved_state) + return -ENOMEM; + + *(unsigned int *)dev->power.saved_state = NCR_0; return 0; } -static int neponset_resume(struct device *dev, u32 level) +static int neponset_resume(struct device *dev) { - if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) { - if (dev->power.saved_state) { - NCR_0 = *(unsigned int *)dev->power.saved_state; - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; - } + if (dev->power.saved_state) { + NCR_0 = *(unsigned int *)dev->power.saved_state; + kfree(dev->power.saved_state); + dev->power.saved_state = NULL; } return 0; diff --git a/drivers/base/platform.c b/drivers/base/platform.c index a1a56ff65b76..75ce8711bca5 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -281,13 +281,9 @@ static int platform_suspend(struct device * dev, pm_message_t state) { int ret = 0; - if (dev->driver && dev->driver->suspend) { - ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE); - if (ret == 0) - ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE); - if (ret == 0) - ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); - } + if (dev->driver && dev->driver->suspend) + ret = dev->driver->suspend(dev, state); + return ret; } @@ -295,13 +291,9 @@ static int platform_resume(struct device * dev) { int ret = 0; - if (dev->driver && dev->driver->resume) { - ret = dev->driver->resume(dev, RESUME_POWER_ON); - if (ret == 0) - ret = dev->driver->resume(dev, RESUME_RESTORE_STATE); - if (ret == 0) - ret = dev->driver->resume(dev, RESUME_ENABLE); - } + if (dev->driver && dev->driver->resume) + ret = dev->driver->resume(dev); + return ret; } diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c index e1a90d9a8756..887b8b2d7882 100644 --- a/drivers/char/s3c2410-rtc.c +++ b/drivers/char/s3c2410-rtc.c @@ -519,30 +519,28 @@ static struct timespec s3c2410_rtc_delta; static int ticnt_save; -static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state) { struct rtc_time tm; struct timespec time; time.tv_nsec = 0; - if (level == SUSPEND_POWER_DOWN) { - /* save TICNT for anyone using periodic interrupts */ + /* save TICNT for anyone using periodic interrupts */ - ticnt_save = readb(S3C2410_TICNT); + ticnt_save = readb(S3C2410_TICNT); - /* calculate time delta for suspend */ + /* calculate time delta for suspend */ - s3c2410_rtc_gettime(&tm); - rtc_tm_to_time(&tm, &time.tv_sec); - save_time_delta(&s3c2410_rtc_delta, &time); - s3c2410_rtc_enable(dev, 0); - } + s3c2410_rtc_gettime(&tm); + rtc_tm_to_time(&tm, &time.tv_sec); + save_time_delta(&s3c2410_rtc_delta, &time); + s3c2410_rtc_enable(dev, 0); return 0; } -static int s3c2410_rtc_resume(struct device *dev, u32 level) +static int s3c2410_rtc_resume(struct device *dev) { struct rtc_time tm; struct timespec time; diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index a4873684f22c..f86c15587238 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1167,19 +1167,17 @@ static int sonypi_disable(void) #ifdef CONFIG_PM static int old_camera_power; -static int sonypi_suspend(struct device *dev, pm_message_t state, u32 level) +static int sonypi_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_DISABLE) { - old_camera_power = sonypi_device.camera_power; - sonypi_disable(); - } + old_camera_power = sonypi_device.camera_power; + sonypi_disable(); + return 0; } -static int sonypi_resume(struct device *dev, u32 level) +static int sonypi_resume(struct device *dev) { - if (level == RESUME_ENABLE) - sonypi_enable(old_camera_power); + sonypi_enable(old_camera_power); return 0; } #endif diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 3625b2601b42..b732020acadb 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -464,32 +464,28 @@ static void s3c2410wdt_shutdown(struct device *dev) static unsigned long wtcon_save; static unsigned long wtdat_save; -static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c2410wdt_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - /* Save watchdog state, and turn it off. */ - wtcon_save = readl(wdt_base + S3C2410_WTCON); - wtdat_save = readl(wdt_base + S3C2410_WTDAT); + /* Save watchdog state, and turn it off. */ + wtcon_save = readl(wdt_base + S3C2410_WTCON); + wtdat_save = readl(wdt_base + S3C2410_WTDAT); - /* Note that WTCNT doesn't need to be saved. */ - s3c2410wdt_stop(); - } + /* Note that WTCNT doesn't need to be saved. */ + s3c2410wdt_stop(); return 0; } -static int s3c2410wdt_resume(struct device *dev, u32 level) +static int s3c2410wdt_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - /* Restore watchdog state. */ + /* Restore watchdog state. */ - writel(wtdat_save, wdt_base + S3C2410_WTDAT); - writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */ - writel(wtcon_save, wdt_base + S3C2410_WTCON); + writel(wtdat_save, wdt_base + S3C2410_WTDAT); + writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */ + writel(wtcon_save, wdt_base + S3C2410_WTCON); - printk(KERN_INFO PFX "watchdog %sabled\n", - (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); - } + printk(KERN_INFO PFX "watchdog %sabled\n", + (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); return 0; } diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 7f0107613827..0015da5668a1 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -296,11 +296,9 @@ static int hdaps_probe(struct device *dev) return 0; } -static int hdaps_resume(struct device *dev, u32 level) +static int hdaps_resume(struct device *dev) { - if (level == RESUME_ENABLE) - return hdaps_device_init(); - return 0; + return hdaps_device_init(); } static struct device_driver hdaps_driver = { diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 73a092fb0e7e..69fa282df2d5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -879,14 +879,12 @@ static int s3c24xx_i2c_remove(struct device *dev) } #ifdef CONFIG_PM -static int s3c24xx_i2c_resume(struct device *dev, u32 level) +static int s3c24xx_i2c_resume(struct device *dev) { struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); - - if (i2c != NULL && level == RESUME_ENABLE) { - dev_dbg(dev, "resume: level %d\n", level); + + if (i2c != NULL) s3c24xx_i2c_init(i2c); - } return 0; } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index dda472e5e8be..45aa0e54e297 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -48,7 +48,7 @@ static int i2c_bus_suspend(struct device * dev, pm_message_t state) int rc = 0; if (dev->driver && dev->driver->suspend) - rc = dev->driver->suspend(dev,state,0); + rc = dev->driver->suspend(dev, state); return rc; } @@ -57,7 +57,7 @@ static int i2c_bus_resume(struct device * dev) int rc = 0; if (dev->driver && dev->driver->resume) - rc = dev->driver->resume(dev,0); + rc = dev->driver->resume(dev); return rc; } diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 347ece6b583c..7fff5a1d2ea4 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1292,7 +1292,7 @@ static void nodemgr_suspend_ne(struct node_entry *ne) if (ud->device.driver && (!ud->device.driver->suspend || - ud->device.driver->suspend(&ud->device, PMSG_SUSPEND, 0))) + ud->device.driver->suspend(&ud->device, PMSG_SUSPEND))) device_release_driver(&ud->device); } up_write(&ne->device.bus->subsys.rwsem); @@ -1315,7 +1315,7 @@ static void nodemgr_resume_ne(struct node_entry *ne) continue; if (ud->device.driver && ud->device.driver->resume) - ud->device.driver->resume(&ud->device, 0); + ud->device.driver->resume(&ud->device); } up_read(&ne->device.bus->subsys.rwsem); diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index 564bb365f6fc..3210d298b3bc 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -259,24 +259,22 @@ static void corgikbd_hinge_timer(unsigned long data) } #ifdef CONFIG_PM -static int corgikbd_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int corgikbd_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct corgikbd *corgikbd = dev_get_drvdata(dev); - corgikbd->suspended = 1; - } + struct corgikbd *corgikbd = dev_get_drvdata(dev); + corgikbd->suspended = 1; + return 0; } -static int corgikbd_resume(struct device *dev, uint32_t level) +static int corgikbd_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct corgikbd *corgikbd = dev_get_drvdata(dev); + struct corgikbd *corgikbd = dev_get_drvdata(dev); + + /* Upon resume, ignore the suspend key for a short while */ + corgikbd->suspend_jiffies=jiffies; + corgikbd->suspended = 0; - /* Upon resume, ignore the suspend key for a short while */ - corgikbd->suspend_jiffies=jiffies; - corgikbd->suspended = 0; - } return 0; } #else diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 732fb310e487..cee9c734a048 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -309,34 +309,32 @@ static void spitzkbd_hinge_timer(unsigned long data) } #ifdef CONFIG_PM -static int spitzkbd_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int spitzkbd_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - int i; - struct spitzkbd *spitzkbd = dev_get_drvdata(dev); - spitzkbd->suspended = 1; - - /* Set Strobe lines as inputs - *except* strobe line 0 leave this - enabled so we can detect a power button press for resume */ - for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_IN); - } + int i; + struct spitzkbd *spitzkbd = dev_get_drvdata(dev); + spitzkbd->suspended = 1; + + /* Set Strobe lines as inputs - *except* strobe line 0 leave this + enabled so we can detect a power button press for resume */ + for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++) + pxa_gpio_mode(spitz_strobes[i] | GPIO_IN); + return 0; } -static int spitzkbd_resume(struct device *dev, uint32_t level) +static int spitzkbd_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - int i; - struct spitzkbd *spitzkbd = dev_get_drvdata(dev); + int i; + struct spitzkbd *spitzkbd = dev_get_drvdata(dev); + + for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) + pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); - for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); + /* Upon resume, ignore the suspend key for a short while */ + spitzkbd->suspend_jiffies = jiffies; + spitzkbd->suspended = 0; - /* Upon resume, ignore the suspend key for a short while */ - spitzkbd->suspend_jiffies = jiffies; - spitzkbd->suspended = 0; - } return 0; } #else diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 40d451ce07ff..4bc40f159996 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -911,12 +911,10 @@ static long i8042_panic_blink(long count) * Here we try to restore the original BIOS settings */ -static int i8042_suspend(struct device *dev, pm_message_t state, u32 level) +static int i8042_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_DISABLE) { - del_timer_sync(&i8042_timer); - i8042_controller_reset(); - } + del_timer_sync(&i8042_timer); + i8042_controller_reset(); return 0; } @@ -926,13 +924,10 @@ static int i8042_suspend(struct device *dev, pm_message_t state, u32 level) * Here we try to reset everything back to a state in which suspended */ -static int i8042_resume(struct device *dev, u32 level) +static int i8042_resume(struct device *dev) { int i; - if (level != RESUME_ENABLE) - return 0; - if (i8042_ctl_test()) return -1; diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 40ae183ba1cd..0ba3e6562bff 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -231,34 +231,32 @@ static irqreturn_t ts_interrupt(int irq, void *dev_id, struct pt_regs *regs) } #ifdef CONFIG_PM -static int corgits_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int corgits_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct corgi_ts *corgi_ts = dev_get_drvdata(dev); - - if (corgi_ts->pendown) { - del_timer_sync(&corgi_ts->timer); - corgi_ts->tc.pressure = 0; - new_data(corgi_ts, NULL); - corgi_ts->pendown = 0; - } - corgi_ts->power_mode = PWR_MODE_SUSPEND; + struct corgi_ts *corgi_ts = dev_get_drvdata(dev); - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); + if (corgi_ts->pendown) { + del_timer_sync(&corgi_ts->timer); + corgi_ts->tc.pressure = 0; + new_data(corgi_ts, NULL); + corgi_ts->pendown = 0; } + corgi_ts->power_mode = PWR_MODE_SUSPEND; + + corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); + return 0; } -static int corgits_resume(struct device *dev, uint32_t level) +static int corgits_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct corgi_ts *corgi_ts = dev_get_drvdata(dev); + struct corgi_ts *corgi_ts = dev_get_drvdata(dev); + + corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); + /* Enable Falling Edge */ + set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); + corgi_ts->power_mode = PWR_MODE_ACTIVE; - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - } return 0; } #else diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c index f0d43fc2632f..262890cb20a7 100644 --- a/drivers/media/video/msp3400.c +++ b/drivers/media/video/msp3400.c @@ -1420,8 +1420,8 @@ static int msp_detach(struct i2c_client *client); static int msp_probe(struct i2c_adapter *adap); static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg); -static int msp_suspend(struct device * dev, pm_message_t state, u32 level); -static int msp_resume(struct device * dev, u32 level); +static int msp_suspend(struct device * dev, pm_message_t state); +static int msp_resume(struct device * dev); static void msp_wake_thread(struct i2c_client *client); @@ -1821,7 +1821,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int msp_suspend(struct device * dev, pm_message_t state, u32 level) +static int msp_suspend(struct device * dev, pm_message_t state) { struct i2c_client *c = container_of(dev, struct i2c_client, dev); @@ -1830,7 +1830,7 @@ static int msp_suspend(struct device * dev, pm_message_t state, u32 level) return 0; } -static int msp_resume(struct device * dev, u32 level) +static int msp_resume(struct device * dev) { struct i2c_client *c = container_of(dev, struct i2c_client, dev); diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 0456dda2624d..94053f149ddf 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -784,13 +784,13 @@ tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int tda9887_suspend(struct device * dev, pm_message_t state, u32 level) +static int tda9887_suspend(struct device * dev, pm_message_t state) { dprintk("tda9887: suspend\n"); return 0; } -static int tda9887_resume(struct device * dev, u32 level) +static int tda9887_resume(struct device * dev) { struct i2c_client *c = container_of(dev, struct i2c_client, dev); struct tda9887 *t = i2c_get_clientdata(c); diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 05572020af4d..ad85bef1c3d5 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -697,7 +697,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int tuner_suspend(struct device *dev, pm_message_t state, u32 level) +static int tuner_suspend(struct device *dev, pm_message_t state) { struct i2c_client *c = container_of (dev, struct i2c_client, dev); struct tuner *t = i2c_get_clientdata (c); @@ -707,7 +707,7 @@ static int tuner_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int tuner_resume(struct device *dev, u32 level) +static int tuner_resume(struct device *dev) { struct i2c_client *c = container_of (dev, struct i2c_client, dev); struct tuner *t = i2c_get_clientdata (c); diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index e9806fbbe696..720e7a326308 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -219,26 +219,24 @@ static int mcp_sa11x0_remove(struct device *dev) return 0; } -static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level) +static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state) { struct mcp *mcp = dev_get_drvdata(dev); - if (level == SUSPEND_DISABLE) { - priv(mcp)->mccr0 = Ser4MCCR0; - priv(mcp)->mccr1 = Ser4MCCR1; - Ser4MCCR0 &= ~MCCR0_MCE; - } + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; + return 0; } -static int mcp_sa11x0_resume(struct device *dev, u32 level) +static int mcp_sa11x0_resume(struct device *dev) { struct mcp *mcp = dev_get_drvdata(dev); - if (level == RESUME_RESTORE_STATE) { - Ser4MCCR1 = priv(mcp)->mccr1; - Ser4MCCR0 = priv(mcp)->mccr0; - } + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; + return 0; } diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index b53af57074e3..8eba373d42d7 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -571,23 +571,23 @@ static int pxamci_remove(struct device *dev) } #ifdef CONFIG_PM -static int pxamci_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxamci_suspend(struct device *dev, pm_message_t state) { struct mmc_host *mmc = dev_get_drvdata(dev); int ret = 0; - if (mmc && level == SUSPEND_DISABLE) + if (mmc) ret = mmc_suspend_host(mmc, state); return ret; } -static int pxamci_resume(struct device *dev, u32 level) +static int pxamci_resume(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); int ret = 0; - if (mmc && level == RESUME_ENABLE) + if (mmc) ret = mmc_resume_host(mmc); return ret; diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 3cbca7cbea80..25f7ce7b3bc0 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1955,14 +1955,14 @@ static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) */ #ifdef CONFIG_PM -static int wbsd_suspend(struct device *dev, pm_message_t state, u32 level) +static int wbsd_suspend(struct device *dev, pm_message_t state) { DBGF("Not yet supported\n"); return 0; } -static int wbsd_resume(struct device *dev, u32 level) +static int wbsd_resume(struct device *dev) { DBGF("Not yet supported\n"); diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 8dcaa357b4bb..55f21ddec3df 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -402,21 +402,21 @@ static int __exit sa1100_mtd_remove(struct device *dev) } #ifdef CONFIG_PM -static int sa1100_mtd_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1100_mtd_suspend(struct device *dev, pm_message_t state) { struct sa_info *info = dev_get_drvdata(dev); int ret = 0; - if (info && level == SUSPEND_SAVE_STATE) + if (info) ret = info->mtd->suspend(info->mtd); return ret; } -static int sa1100_mtd_resume(struct device *dev, u32 level) +static int sa1100_mtd_resume(struct device *dev) { struct sa_info *info = dev_get_drvdata(dev); - if (info && level == RESUME_RESTORE_STATE) + if (info) info->mtd->resume(info->mtd); return 0; } diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index e54fc10f6846..abce1f730d00 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1140,11 +1140,11 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) } static int -dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level) +dm9000_drv_suspend(struct device *dev, pm_message_t state) { struct net_device *ndev = dev_get_drvdata(dev); - if (ndev && level == SUSPEND_DISABLE) { + if (ndev) { if (netif_running(ndev)) { netif_device_detach(ndev); dm9000_shutdown(ndev); @@ -1154,12 +1154,12 @@ dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level) } static int -dm9000_drv_resume(struct device *dev, u32 level) +dm9000_drv_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); board_info_t *db = (board_info_t *) ndev->priv; - if (ndev && level == RESUME_ENABLE) { + if (ndev) { if (netif_running(ndev)) { dm9000_reset(db); diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index 8d34ac60d906..06883309916d 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -291,12 +291,12 @@ static void sa1100_irda_shutdown(struct sa1100_irda *si) /* * Suspend the IrDA interface. */ -static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 level) +static int sa1100_irda_suspend(struct device *_dev, pm_message_t state) { struct net_device *dev = dev_get_drvdata(_dev); struct sa1100_irda *si; - if (!dev || level != SUSPEND_DISABLE) + if (!dev) return 0; si = dev->priv; @@ -316,12 +316,12 @@ static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 leve /* * Resume the IrDA interface. */ -static int sa1100_irda_resume(struct device *_dev, u32 level) +static int sa1100_irda_resume(struct device *_dev) { struct net_device *dev = dev_get_drvdata(_dev); struct sa1100_irda *si; - if (!dev || level != RESUME_ENABLE) + if (!dev) return 0; si = dev->priv; diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index dd89bda1f131..bbac720cca63 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -213,8 +213,8 @@ static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); /* Power Management */ -static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level); -static int smsc_ircc_resume(struct device *dev, u32 level); +static int smsc_ircc_suspend(struct device *dev, pm_message_t state); +static int smsc_ircc_resume(struct device *dev); static struct device_driver smsc_ircc_driver = { .name = SMSC_IRCC2_DRIVER_NAME, @@ -1646,13 +1646,13 @@ static int smsc_ircc_net_close(struct net_device *dev) return 0; } -static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) +static int smsc_ircc_suspend(struct device *dev, pm_message_t state) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); IRDA_MESSAGE("%s, Suspending\n", driver_name); - if (level == SUSPEND_DISABLE && !self->io.suspended) { + if (!self->io.suspended) { smsc_ircc_net_close(self->netdev); self->io.suspended = 1; } @@ -1660,11 +1660,11 @@ static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int smsc_ircc_resume(struct device *dev, u32 level) +static int smsc_ircc_resume(struct device *dev) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); - if (level == RESUME_ENABLE && self->io.suspended) { + if (self->io.suspended) { smsc_ircc_net_open(self->netdev); self->io.suspended = 0; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 90630672703d..ad93b0da87f0 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -133,13 +133,9 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) int ret = 0; struct device_driver *drv = dev->driver; - if (drv && drv->suspend) { - ret = drv->suspend(dev, state, SUSPEND_DISABLE); - if (ret == 0) - ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE); - if (ret == 0) - ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN); - } + if (drv && drv->suspend) + ret = drv->suspend(dev, state); + return ret; } @@ -148,13 +144,9 @@ static int mdio_bus_resume(struct device * dev) int ret = 0; struct device_driver *drv = dev->driver; - if (drv && drv->resume) { - ret = drv->resume(dev, RESUME_POWER_ON); - if (ret == 0) - ret = drv->resume(dev, RESUME_RESTORE_STATE); - if (ret == 0) - ret = drv->resume(dev, RESUME_ENABLE); - } + if (drv && drv->resume) + ret = drv->resume(dev); + return ret; } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1438fdd20826..0ddaa611cc61 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2291,11 +2291,11 @@ static int smc_drv_remove(struct device *dev) return 0; } -static int smc_drv_suspend(struct device *dev, pm_message_t state, u32 level) +static int smc_drv_suspend(struct device *dev, pm_message_t state) { struct net_device *ndev = dev_get_drvdata(dev); - if (ndev && level == SUSPEND_DISABLE) { + if (ndev) { if (netif_running(ndev)) { netif_device_detach(ndev); smc_shutdown(ndev); @@ -2305,12 +2305,12 @@ static int smc_drv_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int smc_drv_resume(struct device *dev, u32 level) +static int smc_drv_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct net_device *ndev = dev_get_drvdata(dev); - if (ndev && level == RESUME_ENABLE) { + if (ndev) { struct smc_local *lp = netdev_priv(ndev); smc_enable_device(pdev); if (netif_running(ndev)) { diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 393e0cee91a9..14f05d22bb70 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -61,7 +61,7 @@ static int pcie_port_remove_service(struct device *dev) static void pcie_port_shutdown_service(struct device *dev) {} -static int pcie_port_suspend_service(struct device *dev, pm_message_t state, u32 level) +static int pcie_port_suspend_service(struct device *dev, pm_message_t state) { struct pcie_device *pciedev; struct pcie_port_service_driver *driver; @@ -76,7 +76,7 @@ static int pcie_port_suspend_service(struct device *dev, pm_message_t state, u32 return 0; } -static int pcie_port_resume_service(struct device *dev, u32 level) +static int pcie_port_resume_service(struct device *dev) { struct pcie_device *pciedev; struct pcie_port_service_driver *driver; diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index 470ef756252e..d90a634cebf5 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -519,30 +519,13 @@ static int au1x00_drv_pcmcia_probe(struct device *dev) } -static int au1x00_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int au1x00_drv_pcmcia_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - - static struct device_driver au1x00_pcmcia_driver = { .probe = au1x00_drv_pcmcia_probe, .remove = au1x00_drv_pcmcia_remove, .name = "au1x00-pcmcia", .bus = &platform_bus_type, - .suspend = au1x00_drv_pcmcia_suspend, - .resume = au1x00_drv_pcmcia_resume + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device au1x00_device = { diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c index 316f8bcc878b..b57a0b98b4d6 100644 --- a/drivers/pcmcia/hd64465_ss.c +++ b/drivers/pcmcia/hd64465_ss.c @@ -844,27 +844,11 @@ static void hs_exit_socket(hs_socket_t *sp) local_irq_restore(flags); } -static int hd64465_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int hd64465_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver hd64465_driver = { .name = "hd64465-pcmcia", .bus = &platform_bus_type, - .suspend = hd64465_suspend, - .resume = hd64465_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device hd64465_device = { diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index a713015e8228..4a41f67d185d 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1332,27 +1332,11 @@ static struct pccard_operations pcic_operations = { /*====================================================================*/ -static int i82365_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int i82365_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver i82365_driver = { .name = "i82365", .bus = &platform_bus_type, - .suspend = i82365_suspend, - .resume = i82365_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device i82365_device = { diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 65f3ee3d4d3c..c6ed70ea4812 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -731,28 +731,11 @@ static struct pccard_operations pcc_operations = { /*====================================================================*/ -static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int m32r_pcc_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - - static struct device_driver pcc_driver = { .name = "cfc", .bus = &platform_bus_type, - .suspend = m32r_pcc_suspend, - .resume = m32r_pcc_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device pcc_device = { diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 7b14d7efd68c..3397ff28de6a 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -695,28 +695,11 @@ static struct pccard_operations pcc_operations = { /*====================================================================*/ -static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int m32r_pcc_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - - static struct device_driver pcc_driver = { .name = "pcc", .bus = &platform_bus_type, - .suspend = m32r_pcc_suspend, - .resume = m32r_pcc_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device pcc_device = { diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 94be9e51654e..2558c3cc91ec 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -329,27 +329,13 @@ static int __devexit omap_cf_remove(struct device *dev) return 0; } -static int omap_cf_suspend(struct device *dev, pm_message_t mesg, u32 level) -{ - if (level != SUSPEND_SAVE_STATE) - return 0; - return pcmcia_socket_dev_suspend(dev, mesg); -} - -static int omap_cf_resume(struct device *dev, u32 level) -{ - if (level != RESUME_RESTORE_STATE) - return 0; - return pcmcia_socket_dev_resume(dev); -} - static struct device_driver omap_cf_driver = { .name = (char *) driver_name, .bus = &platform_bus_type, .probe = omap_cf_probe, .remove = __devexit_p(omap_cf_remove), - .suspend = omap_cf_suspend, - .resume = omap_cf_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static int __init omap_cf_init(void) diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 325c992f7d8f..c2a12d53f6c7 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -205,32 +205,20 @@ int pxa2xx_drv_pcmcia_probe(struct device *dev) } EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe); -static int pxa2xx_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxa2xx_drv_pcmcia_resume(struct device *dev) { - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} + struct pcmcia_low_level *ops = dev->platform_data; + int nr = ops ? ops->nr : 0; -static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - { - struct pcmcia_low_level *ops = dev->platform_data; - int nr = ops ? ops->nr : 0; - - MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); - ret = pcmcia_socket_dev_resume(dev); - } - return ret; + MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); + + return pcmcia_socket_dev_resume(dev); } static struct device_driver pxa2xx_pcmcia_driver = { .probe = pxa2xx_drv_pcmcia_probe, .remove = soc_common_drv_pcmcia_remove, - .suspend = pxa2xx_drv_pcmcia_suspend, + .suspend = pcmcia_socket_dev_suspend, .resume = pxa2xx_drv_pcmcia_resume, .name = "pxa2xx-pcmcia", .bus = &platform_bus_type, diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index d4ed508b38be..b768fa81f043 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -74,29 +74,13 @@ static int sa11x0_drv_pcmcia_probe(struct device *dev) return ret; } -static int sa11x0_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int sa11x0_drv_pcmcia_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver sa11x0_pcmcia_driver = { .probe = sa11x0_drv_pcmcia_probe, .remove = soc_common_drv_pcmcia_remove, .name = "sa11x0-pcmcia", .bus = &platform_bus_type, - .suspend = sa11x0_drv_pcmcia_suspend, - .resume = sa11x0_drv_pcmcia_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; /* sa11x0_pcmcia_init() diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index d5a61eae6119..f158b67f6610 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -372,27 +372,11 @@ static int __init get_tcic_id(void) /*====================================================================*/ -static int tcic_drv_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int tcic_drv_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver tcic_driver = { .name = "tcic-pcmcia", .bus = &platform_bus_type, - .suspend = tcic_drv_suspend, - .resume = tcic_drv_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device tcic_device = { diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index 17bb2da6752b..3d2dca675e02 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -774,31 +774,11 @@ static int __devinit vrc4171_card_setup(char *options) __setup("vrc4171_card=", vrc4171_card_setup); -static int vrc4171_card_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int retval = 0; - - if (level == SUSPEND_SAVE_STATE) - retval = pcmcia_socket_dev_suspend(dev, state); - - return retval; -} - -static int vrc4171_card_resume(struct device *dev, u32 level) -{ - int retval = 0; - - if (level == RESUME_RESTORE_STATE) - retval = pcmcia_socket_dev_resume(dev); - - return retval; -} - static struct device_driver vrc4171_card_driver = { .name = vrc4171_card_name, .bus = &platform_bus_type, - .suspend = vrc4171_card_suspend, - .resume = vrc4171_card_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static int __devinit vrc4171_card_init(void) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 4d75cdfa0a0a..afb7ddf200e0 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2358,13 +2358,10 @@ static int __devexit serial8250_remove(struct device *dev) return 0; } -static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level) +static int serial8250_suspend(struct device *dev, pm_message_t state) { int i; - if (level != SUSPEND_DISABLE) - return 0; - for (i = 0; i < UART_NR; i++) { struct uart_8250_port *up = &serial8250_ports[i]; @@ -2375,13 +2372,10 @@ static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int serial8250_resume(struct device *dev, u32 level) +static int serial8250_resume(struct device *dev) { int i; - if (level != RESUME_ENABLE) - return 0; - for (i = 0; i < UART_NR; i++) { struct uart_8250_port *up = &serial8250_ports[i]; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index bdb4e454b8b0..5b3933b0c997 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -921,21 +921,21 @@ static struct uart_driver imx_reg = { .cons = IMX_CONSOLE, }; -static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level) +static int serial_imx_suspend(struct device *_dev, pm_message_t state) { struct imx_port *sport = dev_get_drvdata(_dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&imx_reg, &sport->port); return 0; } -static int serial_imx_resume(struct device *_dev, u32 level) +static int serial_imx_resume(struct device *_dev) { struct imx_port *sport = dev_get_drvdata(_dev); - if (sport && level == RESUME_ENABLE) + if (sport) uart_resume_port(&imx_reg, &sport->port); return 0; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 0585ab27ffde..8a79968f8ce1 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -781,22 +781,22 @@ mpc52xx_uart_remove(struct device *dev) #ifdef CONFIG_PM static int -mpc52xx_uart_suspend(struct device *dev, pm_message_t state, u32 level) +mpc52xx_uart_suspend(struct device *dev, pm_message_t state) { struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&mpc52xx_uart_driver, port); return 0; } static int -mpc52xx_uart_resume(struct device *dev, u32 level) +mpc52xx_uart_resume(struct device *dev) { struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); - if (port && level == RESUME_ENABLE) + if (port) uart_resume_port(&mpc52xx_uart_driver, port); return 0; diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 90c2a86c421b..7999686d7b47 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -786,21 +786,21 @@ static struct uart_driver serial_pxa_reg = { .cons = PXA_CONSOLE, }; -static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level) +static int serial_pxa_suspend(struct device *_dev, pm_message_t state) { struct uart_pxa_port *sport = dev_get_drvdata(_dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&serial_pxa_reg, &sport->port); return 0; } -static int serial_pxa_resume(struct device *_dev, u32 level) +static int serial_pxa_resume(struct device *_dev) { struct uart_pxa_port *sport = dev_get_drvdata(_dev); - if (sport && level == RESUME_ENABLE) + if (sport) uart_resume_port(&serial_pxa_reg, &sport->port); return 0; diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 52692aa345ec..06a17dff1a73 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1134,23 +1134,22 @@ static int s3c24xx_serial_remove(struct device *_dev) #ifdef CONFIG_PM -static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, - u32 level) +static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state) { struct uart_port *port = s3c24xx_dev_to_port(dev); - if (port && level == SUSPEND_DISABLE) + if (port) uart_suspend_port(&s3c24xx_uart_drv, port); return 0; } -static int s3c24xx_serial_resume(struct device *dev, u32 level) +static int s3c24xx_serial_resume(struct device *dev) { struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - if (port && level == RESUME_ENABLE) { + if (port) { clk_enable(ourport->clk); s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); clk_disable(ourport->clk); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index dd8aed242357..c4a789e6af44 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -834,21 +834,21 @@ static struct uart_driver sa1100_reg = { .cons = SA1100_CONSOLE, }; -static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level) +static int sa1100_serial_suspend(struct device *_dev, pm_message_t state) { struct sa1100_port *sport = dev_get_drvdata(_dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&sa1100_reg, &sport->port); return 0; } -static int sa1100_serial_resume(struct device *_dev, u32 level) +static int sa1100_serial_resume(struct device *_dev) { struct sa1100_port *sport = dev_get_drvdata(_dev); - if (sport && level == RESUME_ENABLE) + if (sport) uart_resume_port(&sa1100_reg, &sport->port); return 0; diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 0c5d65a08f6e..2b623ab0e36e 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -976,14 +976,11 @@ static int siu_remove(struct device *dev) return 0; } -static int siu_suspend(struct device *dev, pm_message_t state, u32 level) +static int siu_suspend(struct device *dev, pm_message_t state) { struct uart_port *port; int i; - if (level != SUSPEND_DISABLE) - return 0; - for (i = 0; i < siu_uart_driver.nr; i++) { port = &siu_uart_ports[i]; if ((port->type == PORT_VR41XX_SIU || @@ -995,14 +992,11 @@ static int siu_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int siu_resume(struct device *dev, u32 level) +static int siu_resume(struct device *dev) { struct uart_port *port; int i; - if (level != RESUME_ENABLE) - return 0; - for (i = 0; i < siu_uart_driver.nr; i++) { port = &siu_uart_ports[i]; if ((port->type == PORT_VR41XX_SIU || diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 583db7c38cf1..f2bdf4e1eb80 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -935,14 +935,10 @@ static int dummy_udc_remove (struct device *dev) return 0; } -static int dummy_udc_suspend (struct device *dev, pm_message_t state, - u32 level) +static int dummy_udc_suspend (struct device *dev, pm_message_t state) { struct dummy *dum = dev_get_drvdata(dev); - if (level != SUSPEND_DISABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; @@ -954,13 +950,10 @@ static int dummy_udc_suspend (struct device *dev, pm_message_t state, return 0; } -static int dummy_udc_resume (struct device *dev, u32 level) +static int dummy_udc_resume (struct device *dev) { struct dummy *dum = dev_get_drvdata(dev); - if (level != RESUME_ENABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; @@ -1936,14 +1929,10 @@ static int dummy_hcd_remove (struct device *dev) return 0; } -static int dummy_hcd_suspend (struct device *dev, pm_message_t state, - u32 level) +static int dummy_hcd_suspend (struct device *dev, pm_message_t state) { struct usb_hcd *hcd; - if (level != SUSPEND_DISABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); @@ -1958,13 +1947,10 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state, return 0; } -static int dummy_hcd_resume (struct device *dev, u32 level) +static int dummy_hcd_resume (struct device *dev) { struct usb_hcd *hcd; - if (level != RESUME_ENABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); hcd->state = HC_STATE_RUNNING; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index ff5533e69560..58b3ec97fb9a 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2909,12 +2909,10 @@ static int __exit omap_udc_remove(struct device *dev) * may involve talking to an external transceiver (e.g. isp1301). */ -static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) +static int omap_udc_suspend(struct device *dev, pm_message_t message) { u32 devstat; - if (level != SUSPEND_POWER_DOWN) - return 0; devstat = UDC_DEVSTAT_REG; /* we're requesting 48 MHz clock if the pullup is enabled @@ -2931,11 +2929,8 @@ static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) return 0; } -static int omap_udc_resume(struct device *dev, u32 level) +static int omap_udc_resume(struct device *dev) { - if (level != RESUME_POWER_ON) - return 0; - DBG("resume + wakeup/SRP\n"); omap_pullup(&udc->gadget, 1); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 73f8c9404156..00dfe42d7a86 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2602,24 +2602,23 @@ static int __exit pxa2xx_udc_remove(struct device *_dev) * VBUS IRQs should probably be ignored so that the PXA device just acts * "dead" to USB hosts until system resume. */ -static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state) { struct pxa2xx_udc *udc = dev_get_drvdata(dev); - if (level == SUSPEND_POWER_DOWN) { - if (!udc->mach->udc_command) - WARN("USB host won't detect disconnect!\n"); - pullup(udc, 0); - } + if (!udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); + pullup(udc, 0); + return 0; } -static int pxa2xx_udc_resume(struct device *dev, u32 level) +static int pxa2xx_udc_resume(struct device *dev) { struct pxa2xx_udc *udc = dev_get_drvdata(dev); - if (level == RESUME_POWER_ON) - pullup(udc, 1); + pullup(udc, 1); + return 0; } diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index e142056b0d2c..0f6183a829c4 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1774,15 +1774,12 @@ static int __init isp116x_probe(struct device *dev) /* Suspend of platform device */ -static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) +static int isp116x_suspend(struct device *dev, pm_message_t state) { int ret = 0; struct usb_hcd *hcd = dev_get_drvdata(dev); - VDBG("%s: state %x, phase %x\n", __func__, state, phase); - - if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN) - return 0; + VDBG("%s: state %x\n", __func__, state); ret = usb_suspend_device(hcd->self.root_hub, state); if (!ret) { @@ -1797,15 +1794,12 @@ static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) /* Resume platform device */ -static int isp116x_resume(struct device *dev, u32 phase) +static int isp116x_resume(struct device *dev) { int ret = 0; struct usb_hcd *hcd = dev_get_drvdata(dev); - VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state, - phase); - if (phase != RESUME_POWER_ON) - return 0; + VDBG("%s: state %x\n", __func__, dev->power.power_state); ret = usb_resume_device(hcd->self.root_hub); if (!ret) { diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index d8f3ba7ad52e..a574216625a0 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -455,14 +455,11 @@ static int ohci_hcd_omap_drv_remove(struct device *dev) #ifdef CONFIG_PM -static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level) +static int ohci_omap_suspend(struct device *dev, pm_message_t message) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = -EINVAL; - if (level != SUSPEND_POWER_DOWN) - return 0; - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); status = ohci_hub_suspend(ohci_to_hcd(ohci)); if (status == 0) { @@ -476,14 +473,11 @@ static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level return status; } -static int ohci_omap_resume(struct device *dev, u32 level) +static int ohci_omap_resume(struct device *dev) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = 0; - if (level != RESUME_POWER_ON) - return 0; - if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 2fdb262d4726..f042261ecb8e 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -309,7 +309,7 @@ static int ohci_hcd_pxa27x_drv_remove(struct device *dev) return 0; } -static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u32 level) +static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state) { // struct platform_device *pdev = to_platform_device(dev); // struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -318,7 +318,7 @@ static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 level) +static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { // struct platform_device *pdev = to_platform_device(dev); // struct usb_hcd *hcd = dev_get_drvdata(dev); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d42a15d10a46..03cf6accfe64 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1784,15 +1784,12 @@ sl811h_probe(struct device *dev) */ static int -sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) +sl811h_suspend(struct device *dev, pm_message_t state) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); int retval = 0; - if (phase != SUSPEND_POWER_DOWN) - return retval; - if (state.event == PM_EVENT_FREEZE) retval = sl811h_hub_suspend(hcd); else if (state.event == PM_EVENT_SUSPEND) @@ -1803,14 +1800,11 @@ sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) } static int -sl811h_resume(struct device *dev, u32 phase) +sl811h_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); - if (phase != RESUME_POWER_ON) - return 0; - /* with no "check to see if VBUS is still powered" board hook, * let's assume it'd only be powered to enable remote wakeup. */ diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c index 3c72c627e65e..1991fdb32dfb 100644 --- a/drivers/video/backlight/corgi_bl.c +++ b/drivers/video/backlight/corgi_bl.c @@ -73,17 +73,15 @@ static void corgibl_blank(int blank) } #ifdef CONFIG_PM -static int corgibl_suspend(struct device *dev, pm_message_t state, u32 level) +static int corgibl_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) - corgibl_blank(FB_BLANK_POWERDOWN); + corgibl_blank(FB_BLANK_POWERDOWN); return 0; } -static int corgibl_resume(struct device *dev, u32 level) +static int corgibl_resume(struct device *dev) { - if (level == RESUME_POWER_ON) - corgibl_blank(FB_BLANK_UNBLANK); + corgibl_blank(FB_BLANK_UNBLANK); return 0; } #else diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 1d54d3d6960b..0b9301facbd3 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -424,23 +424,21 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int imxfb_suspend(struct device *dev, pm_message_t state, u32 level) +static int imxfb_suspend(struct device *dev, pm_message_t state) { struct imxfb_info *fbi = dev_get_drvdata(dev); pr_debug("%s\n",__FUNCTION__); - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) - imxfb_disable_controller(fbi); + imxfb_disable_controller(fbi); return 0; } -static int imxfb_resume(struct device *dev, u32 level) +static int imxfb_resume(struct device *dev) { struct imxfb_info *fbi = dev_get_drvdata(dev); pr_debug("%s\n",__FUNCTION__); - if (level == RESUME_ENABLE) - imxfb_enable_controller(fbi); + imxfb_enable_controller(fbi); return 0; } #else diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 194eed0a238c..6206da9dd5da 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -981,21 +981,19 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxafb_suspend(struct device *dev, pm_message_t state) { struct pxafb_info *fbi = dev_get_drvdata(dev); - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) - set_ctrlr_state(fbi, C_DISABLE_PM); + set_ctrlr_state(fbi, C_DISABLE_PM); return 0; } -static int pxafb_resume(struct device *dev, u32 level) +static int pxafb_resume(struct device *dev) { struct pxafb_info *fbi = dev_get_drvdata(dev); - if (level == RESUME_ENABLE) - set_ctrlr_state(fbi, C_ENABLE_PM); + set_ctrlr_state(fbi, C_ENABLE_PM); return 0; } #else diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index fa98d91c42eb..cb2f7a1de947 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -655,7 +655,7 @@ bail: } #ifdef CONFIG_PM -static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level) +static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state) { struct fb_info *info = dev_get_drvdata(dev); struct s1d13xxxfb_par *s1dfb = info->par; @@ -702,15 +702,12 @@ static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int s1d13xxxfb_resume(struct device *dev, u32 level) +static int s1d13xxxfb_resume(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct s1d13xxxfb_par *s1dfb = info->par; struct s1d13xxxfb_pdata *pdata = NULL; - if (level != RESUME_ENABLE) - return 0; - /* awaken the chip */ s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10); diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 5ab79afb53b7..3862d3cb1fb2 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -847,37 +847,32 @@ static int s3c2410fb_remove(struct device *dev) /* suspend and resume support for the lcd controller */ -static int s3c2410fb_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c2410fb_suspend(struct device *dev, pm_message_t state) { struct fb_info *fbinfo = dev_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) { - s3c2410fb_stop_lcd(); + s3c2410fb_stop_lcd(); - /* sleep before disabling the clock, we need to ensure - * the LCD DMA engine is not going to get back on the bus - * before the clock goes off again (bjd) */ + /* sleep before disabling the clock, we need to ensure + * the LCD DMA engine is not going to get back on the bus + * before the clock goes off again (bjd) */ - msleep(1); - clk_disable(info->clk); - } + msleep(1); + clk_disable(info->clk); return 0; } -static int s3c2410fb_resume(struct device *dev, u32 level) +static int s3c2410fb_resume(struct device *dev) { struct fb_info *fbinfo = dev_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - if (level == RESUME_ENABLE) { - clk_enable(info->clk); - msleep(1); - - s3c2410fb_init_registers(info); + clk_enable(info->clk); + msleep(1); - } + s3c2410fb_init_registers(info); return 0; } diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 8000890e4271..78e5f194b0df 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -1309,21 +1309,19 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val, * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int sa1100fb_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1100fb_suspend(struct device *dev, pm_message_t state) { struct sa1100fb_info *fbi = dev_get_drvdata(dev); - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) - set_ctrlr_state(fbi, C_DISABLE_PM); + set_ctrlr_state(fbi, C_DISABLE_PM); return 0; } -static int sa1100fb_resume(struct device *dev, u32 level) +static int sa1100fb_resume(struct device *dev) { struct sa1100fb_info *fbi = dev_get_drvdata(dev); - if (level == RESUME_ENABLE) - set_ctrlr_state(fbi, C_ENABLE_PM); + set_ctrlr_state(fbi, C_ENABLE_PM); return 0; } #else diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index 0030c071da8f..752bf88906a9 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -438,36 +438,34 @@ static void w100fb_restore_vidmem(struct w100fb_par *par) } } -static int w100fb_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int w100fb_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct fb_info *info = dev_get_drvdata(dev); - struct w100fb_par *par=info->par; - struct w100_tg_info *tg = par->mach->tg; - - w100fb_save_vidmem(par); - if(tg && tg->suspend) - tg->suspend(par); - w100_suspend(W100_SUSPEND_ALL); - par->blanked = 1; - } + struct fb_info *info = dev_get_drvdata(dev); + struct w100fb_par *par=info->par; + struct w100_tg_info *tg = par->mach->tg; + + w100fb_save_vidmem(par); + if(tg && tg->suspend) + tg->suspend(par); + w100_suspend(W100_SUSPEND_ALL); + par->blanked = 1; + return 0; } -static int w100fb_resume(struct device *dev, uint32_t level) +static int w100fb_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct fb_info *info = dev_get_drvdata(dev); - struct w100fb_par *par=info->par; - struct w100_tg_info *tg = par->mach->tg; + struct fb_info *info = dev_get_drvdata(dev); + struct w100fb_par *par=info->par; + struct w100_tg_info *tg = par->mach->tg; + + w100_hw_init(par); + w100fb_activate_var(par); + w100fb_restore_vidmem(par); + if(tg && tg->resume) + tg->resume(par); + par->blanked = 0; - w100_hw_init(par); - w100fb_activate_var(par); - w100fb_restore_vidmem(par); - if(tg && tg->resume) - tg->resume(par); - par->blanked = 0; - } return 0; } #else diff --git a/include/linux/device.h b/include/linux/device.h index 10ab7807f8ea..a9e72ac3fb9f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -28,19 +28,6 @@ #define BUS_ID_SIZE KOBJ_NAME_LEN -enum { - SUSPEND_NOTIFY, - SUSPEND_SAVE_STATE, - SUSPEND_DISABLE, - SUSPEND_POWER_DOWN, -}; - -enum { - RESUME_POWER_ON, - RESUME_RESTORE_STATE, - RESUME_ENABLE, -}; - struct device; struct device_driver; struct class; @@ -115,8 +102,8 @@ struct device_driver { int (*probe) (struct device * dev); int (*remove) (struct device * dev); void (*shutdown) (struct device * dev); - int (*suspend) (struct device * dev, pm_message_t state, u32 level); - int (*resume) (struct device * dev, u32 level); + int (*suspend) (struct device * dev, pm_message_t state); + int (*resume) (struct device * dev); }; diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 38b20efc9c0b..877bb00d3295 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -275,23 +275,23 @@ static int pxa2xx_ac97_do_resume(snd_card_t *card) return 0; } -static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state, u32 level) +static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state) { snd_card_t *card = dev_get_drvdata(_dev); int ret = 0; - if (card && level == SUSPEND_DISABLE) + if (card) ret = pxa2xx_ac97_do_suspend(card, PMSG_SUSPEND); return ret; } -static int pxa2xx_ac97_resume(struct device *_dev, u32 level) +static int pxa2xx_ac97_resume(struct device *_dev) { snd_card_t *card = dev_get_drvdata(_dev); int ret = 0; - if (card && level == RESUME_ENABLE) + if (card) ret = pxa2xx_ac97_do_resume(card); return ret; diff --git a/sound/core/init.c b/sound/core/init.c index c72a79115cca..59202de1d2ce 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -676,8 +676,8 @@ struct snd_generic_device { #define SND_GENERIC_NAME "snd_generic" #ifdef CONFIG_PM -static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level); -static int snd_generic_resume(struct device *dev, u32 level); +static int snd_generic_suspend(struct device *dev, pm_message_t state); +static int snd_generic_resume(struct device *dev); #endif /* initialized in sound.c */ @@ -818,13 +818,10 @@ int snd_card_set_pm_callback(snd_card_t *card, #ifdef CONFIG_SND_GENERIC_DRIVER /* suspend/resume callbacks for snd_generic platform device */ -static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level) +static int snd_generic_suspend(struct device *dev, pm_message_t state) { snd_card_t *card; - if (level != SUSPEND_DISABLE) - return 0; - card = get_snd_generic_card(dev); if (card->power_state == SNDRV_CTL_POWER_D3hot) return 0; @@ -834,13 +831,10 @@ static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level return 0; } -static int snd_generic_resume(struct device *dev, u32 level) +static int snd_generic_resume(struct device *dev) { snd_card_t *card; - if (level != RESUME_ENABLE) - return 0; - card = get_snd_generic_card(dev); if (card->power_state == SNDRV_CTL_POWER_D0) return 0; diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c index becbc420ba41..ec70fadde7d9 100644 --- a/sound/pci/ac97/ac97_bus.c +++ b/sound/pci/ac97/ac97_bus.c @@ -31,7 +31,8 @@ static int ac97_bus_suspend(struct device *dev, pm_message_t state) int ret = 0; if (dev->driver && dev->driver->suspend) - ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); + ret = dev->driver->suspend(dev, state); + return ret; } @@ -40,7 +41,8 @@ static int ac97_bus_resume(struct device *dev) int ret = 0; if (dev->driver && dev->driver->resume) - ret = dev->driver->resume(dev, RESUME_POWER_ON); + ret = dev->driver->resume(dev); + return ret; } -- cgit v1.2.3 From c41455fbac06712992da491844449775cf9a8c80 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Oct 2005 11:59:14 -0700 Subject: [PATCH] kernel-doc: drivers/base fixes driver/base: add missing function parameters; eliminate all warnings. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 ++-- drivers/base/driver.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index ac4b5fdd95f5..8615b42b517a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -407,11 +407,11 @@ static struct device * next_device(struct klist_iter * i) /** * device_for_each_child - device child iterator. - * @dev: parent struct device. + * @parent: parent struct device. * @data: data for the callback. * @fn: function to be called for each device. * - * Iterate over @dev's child devices, and call @fn for each, + * Iterate over @parent's child devices, and call @fn for each, * passing it @data. * * We check the return of @fn each time. If it returns anything diff --git a/drivers/base/driver.c b/drivers/base/driver.c index ef3fe513e398..161f3a390d90 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -28,6 +28,7 @@ static struct device * next_device(struct klist_iter * i) /** * driver_for_each_device - Iterator for devices bound to a driver. * @drv: Driver we're iterating. + * @start: Device to begin with * @data: Data to pass to the callback. * @fn: Function to call for each device. * @@ -57,7 +58,7 @@ EXPORT_SYMBOL_GPL(driver_for_each_device); /** * driver_find_device - device iterator for locating a particular device. - * @driver: The device's driver + * @drv: The device's driver * @start: Device to begin with * @data: Data to pass to match function * @match: Callback function to check device -- cgit v1.2.3 From 20dd6f59d6ea5fe47397c5254606c76b1d047727 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:40 +0200 Subject: [Bluetooth] Remove TXCRC compile option for BCSP driver The TXCRC compile option is not really useful and thus change it into a module parameter. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/Kconfig | 8 -------- drivers/bluetooth/hci_bcsp.c | 42 +++++++++++++++++++++++------------------- drivers/bluetooth/hci_bcsp.h | 1 + drivers/bluetooth/hci_ldisc.c | 2 +- 4 files changed, 25 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 543f93e0f23f..b9fbe6e7f9ae 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -55,14 +55,6 @@ config BT_HCIUART_BCSP Say Y here to compile support for HCI BCSP protocol. -config BT_HCIUART_BCSP_TXCRC - bool "Transmit CRC with every BCSP packet" - depends on BT_HCIUART_BCSP - help - If you say Y here, a 16-bit CRC checksum will be transmitted along with - every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip. - This increases reliability, but slightly reduces efficiency. - config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 0ee324e1265d..91bd293d7a0a 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -28,7 +28,7 @@ * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $ */ -#define VERSION "0.2" +#define VERSION "0.3" #include #include @@ -60,6 +60,7 @@ #define BT_DBG( A... ) #endif +static int txcrc = 1; static int hciextn = 1; /* ---- BCSP CRC calculation ---- */ @@ -173,11 +174,8 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, { struct sk_buff *nskb; u8 hdr[4], chan; - int rel, i; - -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC u16 BCSP_CRC_INIT(bcsp_txmsg_crc); -#endif + int rel, i; switch (pkt_type) { case HCI_ACLDATA_PKT: @@ -240,9 +238,9 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq); bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07; } -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - hdr[0] |= 0x40; -#endif + + if (bcsp->use_crc) + hdr[0] |= 0x40; hdr[1] = ((len << 4) & 0xff) | chan; hdr[2] = len >> 4; @@ -251,25 +249,25 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, /* Put BCSP header */ for (i = 0; i < 4; i++) { bcsp_slip_one_byte(nskb, hdr[i]); -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]); -#endif + + if (bcsp->use_crc) + bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]); } /* Put payload */ for (i = 0; i < len; i++) { bcsp_slip_one_byte(nskb, data[i]); -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - bcsp_crc_update(&bcsp_txmsg_crc, data[i]); -#endif + + if (bcsp->use_crc) + bcsp_crc_update(&bcsp_txmsg_crc, data[i]); } -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC /* Put CRC */ - bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc); - bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff)); - bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff)); -#endif + if (bcsp->use_crc) { + bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc); + bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff)); + bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff)); + } bcsp_slip_msgdelim(nskb); return nskb; @@ -698,6 +696,9 @@ static int bcsp_open(struct hci_uart *hu) bcsp->rx_state = BCSP_W4_PKT_DELIMITER; + if (txcrc) + bcsp->use_crc = 1; + return 0; } @@ -743,5 +744,8 @@ int bcsp_deinit(void) return hci_uart_unregister_proto(&bcsp); } +module_param(txcrc, bool, 0644); +MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet"); + module_param(hciextn, bool, 0644); MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets"); diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h index a2b3bb92274b..01bbc664db74 100644 --- a/drivers/bluetooth/hci_bcsp.h +++ b/drivers/bluetooth/hci_bcsp.h @@ -60,6 +60,7 @@ struct bcsp_struct { BCSP_ESCSTATE_ESC } rx_esc_state; + u8 use_crc; u16 message_crc; u8 txack_req; /* Do we need to send ack's to the peer? */ diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index aed80cc22890..8c9317bcd53c 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -27,7 +27,7 @@ * * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $ */ -#define VERSION "2.1" +#define VERSION "2.2" #include #include -- cgit v1.2.3 From 0372a6627f862f90a2c43772befeecef508cfd7b Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:45 +0200 Subject: [Bluetooth] Cleanup of the HCI UART driver This patch contains the big cleanup of the HCI UART driver. The uneeded header files are removed and their structure declarations are moved into the protocol implementations. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/hci_bcsp.c | 120 ++++++++++++++++++++++++------------- drivers/bluetooth/hci_bcsp.h | 71 ---------------------- drivers/bluetooth/hci_h4.c | 101 +++++++++++++++++++------------ drivers/bluetooth/hci_h4.h | 44 -------------- drivers/bluetooth/hci_ldisc.c | 134 ++++++++++++++++++++++-------------------- drivers/bluetooth/hci_uart.h | 84 +++++++++++++------------- 6 files changed, 253 insertions(+), 301 deletions(-) delete mode 100644 drivers/bluetooth/hci_bcsp.h delete mode 100644 drivers/bluetooth/hci_h4.h (limited to 'drivers') diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 91bd293d7a0a..0a4761415ac3 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -1,35 +1,27 @@ -/* - BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ). - Copyright 2002 by Fabrizio Gennari - - Based on - hci_h4.c by Maxim Krasnyansky - ABCSP by Carl Orsborn - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $ + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2002-2003 Fabrizio Gennari + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "0.3" - #include #include @@ -52,17 +44,56 @@ #include #include + #include "hci_uart.h" -#include "hci_bcsp.h" #ifndef CONFIG_BT_HCIUART_DEBUG #undef BT_DBG #define BT_DBG( A... ) #endif +#define VERSION "0.3" + static int txcrc = 1; static int hciextn = 1; +#define BCSP_TXWINSIZE 4 + +#define BCSP_ACK_PKT 0x05 +#define BCSP_LE_PKT 0x06 + +struct bcsp_struct { + struct sk_buff_head unack; /* Unack'ed packets queue */ + struct sk_buff_head rel; /* Reliable packets queue */ + struct sk_buff_head unrel; /* Unreliable packets queue */ + + unsigned long rx_count; + struct sk_buff *rx_skb; + u8 rxseq_txack; /* rxseq == txack. */ + u8 rxack; /* Last packet sent by us that the peer ack'ed */ + struct timer_list tbcsp; + + enum { + BCSP_W4_PKT_DELIMITER, + BCSP_W4_PKT_START, + BCSP_W4_BCSP_HDR, + BCSP_W4_DATA, + BCSP_W4_CRC + } rx_state; + + enum { + BCSP_ESCSTATE_NOESC, + BCSP_ESCSTATE_ESC + } rx_esc_state; + + u8 use_crc; + u16 message_crc; + u8 txack_req; /* Do we need to send ack's to the peer? */ + + /* Reliable packet sequence number - used to assign seq to each rel pkt. */ + u8 msgq_txseq; +}; + /* ---- BCSP CRC calculation ---- */ /* Table for calculating CRC for polynomial 0x1021, LSB processed first, @@ -112,6 +143,7 @@ static u16 bcsp_crc_reverse(u16 crc) rev |= (crc & 1); crc = crc >> 1; } + return (rev); } @@ -120,6 +152,7 @@ static u16 bcsp_crc_reverse(u16 crc) static void bcsp_slip_msgdelim(struct sk_buff *skb) { const char pkt_delim = 0xc0; + memcpy(skb_put(skb, 1), &pkt_delim, 1); } @@ -315,7 +348,6 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu) spin_unlock_irqrestore(&bcsp->unack.lock, flags); - /* We could not send a reliable packet, either because there are none or because there are too many unack'ed pkts. Did we receive any packets we have not acknowledged yet ? */ @@ -361,7 +393,7 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp) BT_ERR("Peer acked invalid packet"); BT_DBG("Removing %u pkts out of %u, up to seqno %u", - pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07); + pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07); for (i = 0, skb = ((struct sk_buff *) &bcsp->unack)->next; i < pkts_to_be_removed && skb != (struct sk_buff *) &bcsp->unack; i++) { @@ -372,8 +404,10 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp) kfree_skb(skb); skb = nskb; } + if (bcsp->unack.qlen == 0) del_timer(&bcsp->tbcsp); + spin_unlock_irqrestore(&bcsp->unack.lock, flags); if (i != pkts_to_be_removed) @@ -528,6 +562,7 @@ static inline void bcsp_complete_rx_pkt(struct hci_uart *hu) hci_recv_frame(bcsp->rx_skb); } + bcsp->rx_state = BCSP_W4_PKT_DELIMITER; bcsp->rx_skb = NULL; } @@ -596,8 +631,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count) BT_ERR ("Checksum failed: computed %04x received %04x", bcsp_crc_reverse(bcsp->message_crc), - (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) + - bcsp->rx_skb->data[bcsp->rx_skb->len - 1]); + (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) + + bcsp->rx_skb->data[bcsp->rx_skb->len - 1]); kfree_skb(bcsp->rx_skb); bcsp->rx_state = BCSP_W4_PKT_DELIMITER; @@ -631,7 +666,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count) bcsp->rx_count = 4; bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC; BCSP_CRC_INIT(bcsp->message_crc); - + /* Do not increment ptr or decrement count * Allocate packet. Max len of a BCSP pkt= * 0xFFF (payload) +4 (header) +2 (crc) */ @@ -719,18 +754,19 @@ static int bcsp_close(struct hci_uart *hu) } static struct hci_uart_proto bcsp = { - .id = HCI_UART_BCSP, - .open = bcsp_open, - .close = bcsp_close, - .enqueue = bcsp_enqueue, - .dequeue = bcsp_dequeue, - .recv = bcsp_recv, - .flush = bcsp_flush + .id = HCI_UART_BCSP, + .open = bcsp_open, + .close = bcsp_close, + .enqueue = bcsp_enqueue, + .dequeue = bcsp_dequeue, + .recv = bcsp_recv, + .flush = bcsp_flush }; int bcsp_init(void) { int err = hci_uart_register_proto(&bcsp); + if (!err) BT_INFO("HCI BCSP protocol initialized"); else diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h deleted file mode 100644 index 01bbc664db74..000000000000 --- a/drivers/bluetooth/hci_bcsp.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ). - Copyright 2002 by Fabrizio Gennari - - Based on - hci_h4.c by Maxim Krasnyansky - ABCSP by Carl Orsborn - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * $Id: hci_bcsp.h,v 1.2 2002/09/26 05:05:14 maxk Exp $ - */ - -#ifndef __HCI_BCSP_H__ -#define __HCI_BCSP_H__ - -#define BCSP_TXWINSIZE 4 - -#define BCSP_ACK_PKT 0x05 -#define BCSP_LE_PKT 0x06 - -struct bcsp_struct { - struct sk_buff_head unack; /* Unack'ed packets queue */ - struct sk_buff_head rel; /* Reliable packets queue */ - struct sk_buff_head unrel; /* Unreliable packets queue */ - - unsigned long rx_count; - struct sk_buff *rx_skb; - u8 rxseq_txack; /* rxseq == txack. */ - u8 rxack; /* Last packet sent by us that the peer ack'ed */ - struct timer_list tbcsp; - - enum { - BCSP_W4_PKT_DELIMITER, - BCSP_W4_PKT_START, - BCSP_W4_BCSP_HDR, - BCSP_W4_DATA, - BCSP_W4_CRC - } rx_state; - - enum { - BCSP_ESCSTATE_NOESC, - BCSP_ESCSTATE_ESC - } rx_esc_state; - - u8 use_crc; - u16 message_crc; - u8 txack_req; /* Do we need to send ack's to the peer? */ - - /* Reliable packet sequence number - used to assign seq to each rel pkt. */ - u8 msgq_txseq; -}; - -#endif /* __HCI_BCSP_H__ */ diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c index cf8a22d58d96..12e369a66fc2 100644 --- a/drivers/bluetooth/hci_h4.c +++ b/drivers/bluetooth/hci_h4.c @@ -1,33 +1,27 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * Bluetooth HCI UART(H4) protocol. * - * $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $ + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "1.2" #include #include @@ -51,24 +45,41 @@ #include #include + #include "hci_uart.h" -#include "hci_h4.h" #ifndef CONFIG_BT_HCIUART_DEBUG #undef BT_DBG #define BT_DBG( A... ) #endif +#define VERSION "1.2" + +struct h4_struct { + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; + struct sk_buff_head txq; +}; + +/* H4 receiver States */ +#define H4_W4_PACKET_TYPE 0 +#define H4_W4_EVENT_HDR 1 +#define H4_W4_ACL_HDR 2 +#define H4_W4_SCO_HDR 3 +#define H4_W4_DATA 4 + /* Initialize protocol */ static int h4_open(struct hci_uart *hu) { struct h4_struct *h4; - + BT_DBG("hu %p", hu); - + h4 = kmalloc(sizeof(*h4), GFP_ATOMIC); if (!h4) return -ENOMEM; + memset(h4, 0, sizeof(*h4)); skb_queue_head_init(&h4->txq); @@ -83,7 +94,9 @@ static int h4_flush(struct hci_uart *hu) struct h4_struct *h4 = hu->priv; BT_DBG("hu %p", hu); + skb_queue_purge(&h4->txq); + return 0; } @@ -91,16 +104,19 @@ static int h4_flush(struct hci_uart *hu) static int h4_close(struct hci_uart *hu) { struct h4_struct *h4 = hu->priv; + hu->priv = NULL; BT_DBG("hu %p", hu); skb_queue_purge(&h4->txq); + if (h4->rx_skb) kfree_skb(h4->rx_skb); hu->priv = NULL; kfree(h4); + return 0; } @@ -114,6 +130,7 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb) /* Prepend skb with frame type */ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); skb_queue_tail(&h4->txq, skb); + return 0; } @@ -122,6 +139,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) register int room = skb_tailroom(h4->rx_skb); BT_DBG("len %d room %d", len, room); + if (!len) { hci_recv_frame(h4->rx_skb); } else if (len > room) { @@ -136,6 +154,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) h4->rx_state = H4_W4_PACKET_TYPE; h4->rx_skb = NULL; h4->rx_count = 0; + return 0; } @@ -228,6 +247,7 @@ static int h4_recv(struct hci_uart *hu, void *data, int count) ptr++; count--; continue; }; + ptr++; count--; /* Allocate packet */ @@ -238,9 +258,11 @@ static int h4_recv(struct hci_uart *hu, void *data, int count) h4->rx_count = 0; return 0; } + h4->rx_skb->dev = (void *) hu->hdev; bt_cb(h4->rx_skb)->pkt_type = type; } + return count; } @@ -251,23 +273,24 @@ static struct sk_buff *h4_dequeue(struct hci_uart *hu) } static struct hci_uart_proto h4p = { - .id = HCI_UART_H4, - .open = h4_open, - .close = h4_close, - .recv = h4_recv, - .enqueue = h4_enqueue, - .dequeue = h4_dequeue, - .flush = h4_flush, + .id = HCI_UART_H4, + .open = h4_open, + .close = h4_close, + .recv = h4_recv, + .enqueue = h4_enqueue, + .dequeue = h4_dequeue, + .flush = h4_flush, }; - + int h4_init(void) { int err = hci_uart_register_proto(&h4p); + if (!err) BT_INFO("HCI H4 protocol initialized"); else BT_ERR("HCI H4 protocol registration failed"); - + return err; } diff --git a/drivers/bluetooth/hci_h4.h b/drivers/bluetooth/hci_h4.h deleted file mode 100644 index b95ff54bfd47..000000000000 --- a/drivers/bluetooth/hci_h4.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * $Id: hci_h4.h,v 1.2 2002/09/09 01:17:32 maxk Exp $ - */ - -#ifdef __KERNEL__ -struct h4_struct { - unsigned long rx_state; - unsigned long rx_count; - struct sk_buff *rx_skb; - struct sk_buff_head txq; -}; - -/* H4 receiver States */ -#define H4_W4_PACKET_TYPE 0 -#define H4_W4_EVENT_HDR 1 -#define H4_W4_ACL_HDR 2 -#define H4_W4_SCO_HDR 3 -#define H4_W4_DATA 4 - -#endif /* __KERNEL__ */ diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 8c9317bcd53c..4a775f6ea390 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -1,33 +1,27 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * Bluetooth HCI UART driver. * - * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $ + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "2.2" #include #include @@ -59,6 +53,8 @@ #define BT_DBG( A... ) #endif +#define VERSION "2.2" + static int reset = 0; static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; @@ -72,6 +68,7 @@ int hci_uart_register_proto(struct hci_uart_proto *p) return -EEXIST; hup[p->id] = p; + return 0; } @@ -84,6 +81,7 @@ int hci_uart_unregister_proto(struct hci_uart_proto *p) return -EINVAL; hup[p->id] = NULL; + return 0; } @@ -91,13 +89,14 @@ static struct hci_uart_proto *hci_uart_get_proto(unsigned int id) { if (id >= HCI_UART_MAX_PROTO) return NULL; + return hup[id]; } static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) { struct hci_dev *hdev = hu->hdev; - + /* Update HCI stat counters */ switch (pkt_type) { case HCI_COMMAND_PKT: @@ -117,10 +116,12 @@ static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu) { struct sk_buff *skb = hu->tx_skb; + if (!skb) skb = hu->proto->dequeue(hu); else hu->tx_skb = NULL; + return skb; } @@ -129,7 +130,7 @@ int hci_uart_tx_wakeup(struct hci_uart *hu) struct tty_struct *tty = hu->tty; struct hci_dev *hdev = hu->hdev; struct sk_buff *skb; - + if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) { set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); return 0; @@ -142,7 +143,7 @@ restart: while ((skb = hci_uart_dequeue(hu))) { int len; - + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); len = tty->driver->write(tty, skb->data, skb->len); hdev->stat.byte_tx += len; @@ -152,11 +153,11 @@ restart: hu->tx_skb = skb; break; } - + hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type); kfree_skb(skb); - } - + } + if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state)) goto restart; @@ -173,6 +174,7 @@ static int hci_uart_open(struct hci_dev *hdev) /* Nothing to do for UART driver */ set_bit(HCI_RUNNING, &hdev->flags); + return 0; } @@ -234,6 +236,7 @@ static int hci_uart_send_frame(struct sk_buff *skb) hu->proto->enqueue(hu, skb); hci_uart_tx_wakeup(hu); + return 0; } @@ -241,7 +244,8 @@ static void hci_uart_destruct(struct hci_dev *hdev) { struct hci_uart *hu; - if (!hdev) return; + if (!hdev) + return; BT_DBG("%s", hdev->name); @@ -272,6 +276,7 @@ static int hci_uart_tty_open(struct tty_struct *tty) BT_ERR("Can't allocate controll structure"); return -ENFILE; } + memset(hu, 0, sizeof(struct hci_uart)); tty->disc_data = hu; @@ -280,8 +285,10 @@ static int hci_uart_tty_open(struct tty_struct *tty) spin_lock_init(&hu->rx_lock); /* Flush any pending characters in the driver and line discipline. */ + /* FIXME: why is this needed. Note don't use ldisc_ref here as the open path is before the ldisc is referencable */ + if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); @@ -372,13 +379,13 @@ static int hci_uart_tty_room (struct tty_struct *tty) static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count) { struct hci_uart *hu = (void *)tty->disc_data; - + if (!hu || tty != hu->tty) return; if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) return; - + spin_lock(&hu->rx_lock); hu->proto->recv(hu, (void *) data, count); hu->hdev->stat.byte_rx += count; @@ -429,8 +436,8 @@ static int hci_uart_register_dev(struct hci_uart *hu) static int hci_uart_set_proto(struct hci_uart *hu, int id) { struct hci_uart_proto *p; - int err; - + int err; + p = hci_uart_get_proto(id); if (!p) return -EPROTONOSUPPORT; @@ -446,6 +453,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id) p->close(hu); return err; } + return 0; } @@ -463,7 +471,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id) * Return Value: Command dependent */ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) + unsigned int cmd, unsigned long arg) { struct hci_uart *hu = (void *)tty->disc_data; int err = 0; @@ -483,14 +491,14 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, return err; } tty->low_latency = 1; - } else + } else return -EBUSY; case HCIUARTGETPROTO: if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) return hu->proto->id; return -EUNATCH; - + default: err = n_tty_ioctl(tty, file, cmd, arg); break; @@ -502,28 +510,24 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, /* * We don't provide read/write/poll interface for user space. */ -static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr) +static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, + unsigned char __user *buf, size_t nr) { return 0; } -static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) + +static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, + const unsigned char *data, size_t count) { return 0; } -static unsigned int hci_uart_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait) + +static unsigned int hci_uart_tty_poll(struct tty_struct *tty, + struct file *filp, poll_table *wait) { return 0; } -#ifdef CONFIG_BT_HCIUART_H4 -int h4_init(void); -int h4_deinit(void); -#endif -#ifdef CONFIG_BT_HCIUART_BCSP -int bcsp_init(void); -int bcsp_deinit(void); -#endif - static int __init hci_uart_init(void) { static struct tty_ldisc hci_uart_ldisc; @@ -534,18 +538,18 @@ static int __init hci_uart_init(void) /* Register the tty discipline */ memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc)); - hci_uart_ldisc.magic = TTY_LDISC_MAGIC; - hci_uart_ldisc.name = "n_hci"; - hci_uart_ldisc.open = hci_uart_tty_open; - hci_uart_ldisc.close = hci_uart_tty_close; - hci_uart_ldisc.read = hci_uart_tty_read; - hci_uart_ldisc.write = hci_uart_tty_write; - hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; - hci_uart_ldisc.poll = hci_uart_tty_poll; - hci_uart_ldisc.receive_room= hci_uart_tty_room; - hci_uart_ldisc.receive_buf = hci_uart_tty_receive; - hci_uart_ldisc.write_wakeup= hci_uart_tty_wakeup; - hci_uart_ldisc.owner = THIS_MODULE; + hci_uart_ldisc.magic = TTY_LDISC_MAGIC; + hci_uart_ldisc.name = "n_hci"; + hci_uart_ldisc.open = hci_uart_tty_open; + hci_uart_ldisc.close = hci_uart_tty_close; + hci_uart_ldisc.read = hci_uart_tty_read; + hci_uart_ldisc.write = hci_uart_tty_write; + hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; + hci_uart_ldisc.poll = hci_uart_tty_poll; + hci_uart_ldisc.receive_room = hci_uart_tty_room; + hci_uart_ldisc.receive_buf = hci_uart_tty_receive; + hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup; + hci_uart_ldisc.owner = THIS_MODULE; if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) { BT_ERR("HCI line discipline registration failed. (%d)", err); diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index 0a57d72790ec..b250e6789dee 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -1,32 +1,29 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * $Id: hci_uart.h,v 1.2 2002/09/09 01:17:32 maxk Exp $ + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#ifndef N_HCI +#ifndef N_HCI #define N_HCI 15 #endif @@ -42,7 +39,6 @@ #define HCI_UART_3WIRE 2 #define HCI_UART_H4DS 3 -#ifdef __KERNEL__ struct hci_uart; struct hci_uart_proto { @@ -56,27 +52,35 @@ struct hci_uart_proto { }; struct hci_uart { - struct tty_struct *tty; - struct hci_dev *hdev; - unsigned long flags; + struct tty_struct *tty; + struct hci_dev *hdev; + unsigned long flags; - struct hci_uart_proto *proto; - void *priv; - - struct sk_buff *tx_skb; - unsigned long tx_state; - spinlock_t rx_lock; + struct hci_uart_proto *proto; + void *priv; + + struct sk_buff *tx_skb; + unsigned long tx_state; + spinlock_t rx_lock; }; /* HCI_UART flag bits */ -#define HCI_UART_PROTO_SET 0 +#define HCI_UART_PROTO_SET 0 /* TX states */ -#define HCI_UART_SENDING 1 -#define HCI_UART_TX_WAKEUP 2 +#define HCI_UART_SENDING 1 +#define HCI_UART_TX_WAKEUP 2 int hci_uart_register_proto(struct hci_uart_proto *p); int hci_uart_unregister_proto(struct hci_uart_proto *p); int hci_uart_tx_wakeup(struct hci_uart *hu); -#endif /* __KERNEL__ */ +#ifdef CONFIG_BT_HCIUART_H4 +int h4_init(void); +int h4_deinit(void); +#endif + +#ifdef CONFIG_BT_HCIUART_BCSP +int bcsp_init(void); +int bcsp_deinit(void); +#endif -- cgit v1.2.3 From 245dc3d19b6ff7db42c9f3cca9006c8db59e2dee Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:57 +0200 Subject: [Bluetooth] Ignore additional interfaces of BPA 100/105 devices If a BPA 100/105 device contains more then one interface then ignore the additional interfaces, because they are unused. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/bpa10x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 4fa85234d8b5..0db0400519c9 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -550,6 +550,9 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id * if (ignore) return -ENODEV; + if (intf->cur_altsetting->desc.bInterfaceNumber > 0) + return -ENODEV; + data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) { BT_ERR("Can't allocate data structure"); -- cgit v1.2.3 From a21a84a375ea3783cf9a53730d643c4db24371bc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Oct 2005 15:43:16 -0400 Subject: [libata pdc_adma] minor fixes and cleanups Changes mostly from Mark Lord. - fix bugs in probe-time error handling - only complete qc if not NULL - check port-level polling flags --- drivers/scsi/pdc_adma.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 9820f272f889..7999817915c3 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.01" +#define DRV_VERSION "0.03" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) @@ -79,7 +79,6 @@ enum { aNIEN = (1 << 8), /* irq mask: 1==masked */ aGO = (1 << 7), /* packet trigger ("Go!") */ aRSTADM = (1 << 5), /* ADMA logic reset */ - aRSTA = (1 << 2), /* ATA hard reset */ aPIOMD4 = 0x0003, /* PIO mode 4 */ /* ADMA_STATUS register bits */ @@ -452,24 +451,25 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) struct adma_port_priv *pp; struct ata_queued_cmd *qc; void __iomem *chan = ADMA_REGS(mmio_base, port_no); - u8 drv_stat, status = readb(chan + ADMA_STATUS); + u8 drv_stat = 0, status = readb(chan + ADMA_STATUS); if (status == 0) continue; handled = 1; adma_enter_reg_mode(ap); - if ((ap->flags & ATA_FLAG_PORT_DISABLED)) + if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) continue; pp = ap->private_data; if (!pp || pp->state != adma_state_pkt) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - drv_stat = 0; - if ((status & (aPERR | aPSD | aUIRQ))) - drv_stat = ATA_ERR; - else if (pp->pkt[0] != cDONE) - drv_stat = ATA_ERR; - ata_qc_complete(qc, drv_stat); + if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if ((status & (aPERR | aPSD | aUIRQ))) + drv_stat = ATA_ERR; + else if (pp->pkt[0] != cDONE) + drv_stat = ATA_ERR; + ata_qc_complete(qc, drv_stat); + } } return handled; } @@ -561,15 +561,15 @@ static int adma_port_start(struct ata_port *ap) if ((pp->pkt_dma & 7) != 0) { printk("bad alignment for pp->pkt_dma: %08x\n", (u32)pp->pkt_dma); - goto err_out_kfree2; + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + goto err_out_kfree; } memset(pp->pkt, 0, ADMA_PKT_BYTES); ap->private_data = pp; adma_reinit_engine(ap); return 0; -err_out_kfree2: - kfree(pp); err_out_kfree: kfree(pp); err_out: -- cgit v1.2.3 From 00ac37f508689da281586c7ef304f26b5138d8a6 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Fri, 28 Oct 2005 15:58:28 -0400 Subject: [libata scsi] MODE SELECT, strengthen mode sense - move default mode pages to the front of libata-scsi.c so various functions can access them - partial annotation of these pages, point out divergence from sat-r06 - replace various mode page magic numbers with defines - strengthen MODE SENSE command decoding: handle DBD bit in cdb, yield block descriptor (per sat-r06) and handle mode sub pages Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 144 ++++++++++++++++++++++++++++++++------------- 1 file changed, 103 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index b761bd1b9717..89a04b1a5a0e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -51,6 +51,45 @@ typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scs static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); +#define RW_RECOVERY_MPAGE 0x1 +#define RW_RECOVERY_MPAGE_LEN 12 +#define CACHE_MPAGE 0x8 +#define CACHE_MPAGE_LEN 20 +#define CONTROL_MPAGE 0xa +#define CONTROL_MPAGE_LEN 12 +#define ALL_MPAGES 0x3f +#define ALL_SUB_MPAGES 0xff + + +static const u8 def_rw_recovery_mpage[] = { + RW_RECOVERY_MPAGE, + RW_RECOVERY_MPAGE_LEN - 2, + (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ + (1 << 6), /* ARRE (auto read reallocation) */ + 0, /* read retry count */ + 0, 0, 0, 0, + 0, /* write retry count */ + 0, 0, 0 +}; + +static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { + CACHE_MPAGE, + CACHE_MPAGE_LEN - 2, + 0, /* contains WCE, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, /* contains DRA, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0 +}; + +static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { + CONTROL_MPAGE, + CONTROL_MPAGE_LEN - 2, + 2, /* DSENSE=0, GLTSD=1 */ + 0, /* [QAM+QERR may be 1, see 05-359r1] */ + 0, 0, 0, 0, 0xff, 0xff, + 0, 30 /* extended self test time, see 05-359r1 */ +}; + static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) @@ -1583,13 +1622,9 @@ static void ata_msense_push(u8 **ptr_io, const u8 *last, static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, const u8 *last) { - u8 page[] = { - 0x8, /* page code */ - 0x12, /* page length */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */ - 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */ - }; + u8 page[CACHE_MPAGE_LEN]; + memcpy(page, def_cache_mpage, sizeof(page)); if (ata_id_wcache_enabled(id)) page[2] |= (1 << 2); /* write cache enable */ if (!ata_id_rahead_enabled(id)) @@ -1613,15 +1648,9 @@ static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) { - const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30}; - - /* byte 2: set the descriptor format sense data bit (bit 2) - * since we need to support returning this format for SAT - * commands and any SCSI commands against a 48b LBA device. - */ - - ata_msense_push(ptr_io, last, page, sizeof(page)); - return sizeof(page); + ata_msense_push(ptr_io, last, def_control_mpage, + sizeof(def_control_mpage)); + return sizeof(def_control_mpage); } /** @@ -1638,15 +1667,10 @@ static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) { - const u8 page[] = { - 0x1, /* page code */ - 0xa, /* page length */ - (1 << 7) | (1 << 6), /* note auto r/w reallocation */ - 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */ - }; - ata_msense_push(ptr_io, last, page, sizeof(page)); - return sizeof(page); + ata_msense_push(ptr_io, last, def_rw_recovery_mpage, + sizeof(def_rw_recovery_mpage)); + return sizeof(def_rw_recovery_mpage); } /** @@ -1655,7 +1679,9 @@ static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * - * Simulate MODE SENSE commands. + * Simulate MODE SENSE commands. Assume this is invoked for direct + * access devices (e.g. disks) only. There should be no block + * descriptor for other device types. * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -1665,15 +1691,22 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { u8 *scsicmd = args->cmd->cmnd, *p, *last; - unsigned int page_control, six_byte, output_len; + const u8 sat_blk_desc[] = { + 0, 0, 0, 0, /* number of blocks: sat unspecified */ + 0, + 0, 0x2, 0x0 /* block length: 512 bytes */ + }; + u8 pg, spg; + unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen; VPRINTK("ENTER\n"); six_byte = (scsicmd[0] == MODE_SENSE); - - /* we only support saved and current values (which we treat - * in the same manner) + ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ + /* + * LLBA bit in msense(10) ignored (compliant) */ + page_control = scsicmd[2] >> 6; switch (page_control) { case 0: /* current */ @@ -1686,29 +1719,42 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, goto invalid_fld; } - if (six_byte) - output_len = 4; - else - output_len = 8; + if (six_byte) { + output_len = 4 + (ebd ? 8 : 0); + alloc_len = scsicmd[4]; + } else { + output_len = 8 + (ebd ? 8 : 0); + alloc_len = (scsicmd[7] << 8) + scsicmd[8]; + } + minlen = (alloc_len < buflen) ? alloc_len : buflen; p = rbuf + output_len; - last = rbuf + buflen - 1; + last = rbuf + minlen - 1; - switch(scsicmd[2] & 0x3f) { - case 0x01: /* r/w error recovery */ + pg = scsicmd[2] & 0x3f; + spg = scsicmd[3]; + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_fld; + + switch(pg) { + case RW_RECOVERY_MPAGE: output_len += ata_msense_rw_recovery(&p, last); break; - case 0x08: /* caching */ + case CACHE_MPAGE: output_len += ata_msense_caching(args->id, &p, last); break; - case 0x0a: { /* control mode */ + case CONTROL_MPAGE: { output_len += ata_msense_ctl_mode(&p, last); break; } - case 0x3f: /* all pages */ + case ALL_MPAGES: output_len += ata_msense_rw_recovery(&p, last); output_len += ata_msense_caching(args->id, &p, last); output_len += ata_msense_ctl_mode(&p, last); @@ -1718,15 +1764,31 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, goto invalid_fld; } + if (minlen < 1) + return 0; if (six_byte) { output_len--; rbuf[0] = output_len; + if (ebd) { + if (minlen > 3) + rbuf[3] = sizeof(sat_blk_desc); + if (minlen > 11) + memcpy(rbuf + 4, sat_blk_desc, + sizeof(sat_blk_desc)); + } } else { output_len -= 2; rbuf[0] = output_len >> 8; - rbuf[1] = output_len; + if (minlen > 1) + rbuf[1] = output_len; + if (ebd) { + if (minlen > 7) + rbuf[7] = sizeof(sat_blk_desc); + if (minlen > 15) + memcpy(rbuf + 8, sat_blk_desc, + sizeof(sat_blk_desc)); + } } - return 0; invalid_fld: @@ -2156,7 +2218,7 @@ ata_scsi_map_proto(u8 byte1) * Zero on success, non-zero on failure. */ static unsigned int -ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) +ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &(qc->tf); struct scsi_cmnd *cmd = qc->scsicmd; -- cgit v1.2.3 From a4e2b347848bf626b822599329933887dc90e50f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Oct 2005 15:46:52 -0700 Subject: [PATCH] tg3: add 5714/5715 support Add complete support for 5714/5715. These chips are very similar to 5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is added to identify these chips. Signed-off-by: Michael Chan Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 39 +++++++++++++++++++++++++-------------- drivers/net/tg3.h | 11 +++++++++-- include/linux/pci_ids.h | 2 ++ 3 files changed, 36 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 1802c3b48799..cf2204f5b7f9 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -219,6 +219,10 @@ static struct pci_device_id tg3_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S, @@ -570,7 +574,7 @@ static void tg3_switch_clocks(struct tg3 *tp) u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL); u32 orig_clock_ctrl; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) return; orig_clock_ctrl = clock_ctrl; @@ -1210,7 +1214,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state) CLOCK_CTRL_ALTCLK | CLOCK_CTRL_PWRDOWN_PLL133); udelay(40); - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { /* do nothing */ } else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) { @@ -3712,14 +3716,14 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp, dev->mtu = new_mtu; if (new_mtu > ETH_DATA_LEN) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; ethtool_op_set_tso(dev, 0); } else tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE; } else { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE; } @@ -3850,7 +3854,7 @@ static void tg3_init_rings(struct tg3 *tp) memset(tp->tx_ring, 0, TG3_TX_RING_BYTES); tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ; - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) && + if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) && (tp->dev->mtu > ETH_DATA_LEN)) tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ; @@ -4347,7 +4351,7 @@ static int tg3_chip_reset(struct tg3 *tp) val &= ~PCIX_CAPS_RELAXED_ORDERING; pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { u32 val; /* Chip reset on 5780 will reset MSI enable bit, @@ -6003,7 +6007,7 @@ static int tg3_reset_hw(struct tg3 *tp) tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK); if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) && - (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)) + !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) limit = 8; else limit = 16; @@ -7237,7 +7241,7 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->supported |= (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); - if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) + if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) cmd->supported |= (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_10baseT_Half | @@ -8380,7 +8384,7 @@ static void __devinit tg3_get_nvram_info(struct tg3 *tp) } if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) { + (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) { case FLASH_VENDOR_ATMEL_FLASH_BUFFERED: tp->nvram_jedecnum = JEDEC_ATMEL; @@ -8980,7 +8984,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->phy_id = eeprom_phy_id; if (eeprom_phy_serdes) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) tp->tg3_flags2 |= TG3_FLG2_MII_SERDES; else tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; @@ -9393,8 +9397,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } /* Find msi capability. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + tp->tg3_flags2 |= TG3_FLG2_5780_CLASS; tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI); + } /* Initialize misc host control in PCI block. */ tp->misc_host_ctrl |= (misc_ctrl_reg & @@ -9412,7 +9419,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) tp->tg3_flags2 |= TG3_FLG2_5750_PLUS; if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) || @@ -9607,7 +9614,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) * ether_setup() via the alloc_etherdev() call */ if (tp->dev->mtu > ETH_DATA_LEN && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780) + !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE; /* Determine WakeOnLan speed to use. */ @@ -9830,7 +9837,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) mac_offset = 0x7c; if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 && !(tp->tg3_flags & TG3_FLG2_SUN_570X)) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID) mac_offset = 0xcc; if (tg3_nvram_lock(tp)) @@ -10148,6 +10155,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp) } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { /* 5780 always in PCIX mode */ tp->dma_rwctrl |= 0x00144000; + } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + /* 5714 always in PCIX mode */ + tp->dma_rwctrl |= 0x00148000; } else { tp->dma_rwctrl |= 0x001b000f; } @@ -10347,6 +10357,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp) case PHY_ID_BCM5705: return "5705"; case PHY_ID_BCM5750: return "5750"; case PHY_ID_BCM5752: return "5752"; + case PHY_ID_BCM5714: return "5714"; case PHY_ID_BCM5780: return "5780"; case PHY_ID_BCM8002: return "8002/serdes"; case 0: return "serdes"; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 2e733c60bfa4..456ef2b3d0ef 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -137,6 +137,7 @@ #define ASIC_REV_5750 0x04 #define ASIC_REV_5752 0x06 #define ASIC_REV_5780 0x08 +#define ASIC_REV_5714 0x09 #define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8) #define CHIPREV_5700_AX 0x70 #define CHIPREV_5700_BX 0x71 @@ -531,6 +532,8 @@ #define MAC_SERDES_CFG_EDGE_SELECT 0x00001000 #define MAC_SERDES_STAT 0x00000594 /* 0x598 --> 0x5b0 unused */ +#define SERDES_RX_CTRL 0x000005b0 /* 5780/5714 only */ +#define SERDES_RX_SIG_DETECT 0x00000400 #define SG_DIG_CTRL 0x000005b0 #define SG_DIG_USING_HW_AUTONEG 0x80000000 #define SG_DIG_SOFT_RESET 0x40000000 @@ -1329,6 +1332,8 @@ #define GRC_LCLCTRL_CLEARINT 0x00000002 #define GRC_LCLCTRL_SETINT 0x00000004 #define GRC_LCLCTRL_INT_ON_ATTN 0x00000008 +#define GRC_LCLCTRL_USE_SIG_DETECT 0x00000010 /* 5714/5780 only */ +#define GRC_LCLCTRL_USE_EXT_SIG_DETECT 0x00000020 /* 5714/5780 only */ #define GRC_LCLCTRL_GPIO_INPUT3 0x00000020 #define GRC_LCLCTRL_GPIO_OE3 0x00000040 #define GRC_LCLCTRL_GPIO_OUTPUT3 0x00000080 @@ -2175,6 +2180,7 @@ struct tg3 { TG3_FLG2_MII_SERDES) #define TG3_FLG2_PARALLEL_DETECT 0x01000000 #define TG3_FLG2_ICH_WORKAROUND 0x02000000 +#define TG3_FLG2_5780_CLASS 0x04000000 u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 @@ -2222,6 +2228,7 @@ struct tg3 { #define PHY_ID_BCM5705 0x600081a0 #define PHY_ID_BCM5750 0x60008180 #define PHY_ID_BCM5752 0x60008100 +#define PHY_ID_BCM5714 0x60008340 #define PHY_ID_BCM5780 0x60008350 #define PHY_ID_BCM8002 0x60010140 #define PHY_ID_INVALID 0xffffffff @@ -2246,8 +2253,8 @@ struct tg3 { (X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \ (X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \ (X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \ - (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5780 || \ - (X) == PHY_ID_BCM8002) + (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \ + (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM8002) struct tg3_hw_stats *hw_stats; dma_addr_t stats_mapping; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 71834f05504f..d6865bbd9ea4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2165,11 +2165,13 @@ #define PCI_DEVICE_ID_TIGON3_5721 0x1659 #define PCI_DEVICE_ID_TIGON3_5705M 0x165d #define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e +#define PCI_DEVICE_ID_TIGON3_5714 0x1668 #define PCI_DEVICE_ID_TIGON3_5780 0x166a #define PCI_DEVICE_ID_TIGON3_5780S 0x166b #define PCI_DEVICE_ID_TIGON3_5705F 0x166e #define PCI_DEVICE_ID_TIGON3_5750 0x1676 #define PCI_DEVICE_ID_TIGON3_5751 0x1677 +#define PCI_DEVICE_ID_TIGON3_5715 0x1678 #define PCI_DEVICE_ID_TIGON3_5750M 0x167c #define PCI_DEVICE_ID_TIGON3_5751M 0x167d #define PCI_DEVICE_ID_TIGON3_5751F 0x167e -- cgit v1.2.3 From 28fbef78a420acdea20570d31f3bdcbfa0cac0d2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Oct 2005 15:48:35 -0700 Subject: [PATCH] tg3: fix ASF heartbeat Change the ASF heart beat to 5 seconds for faster detection of system crash. The driver sends the heartbeat every 2 seconds and the ASF firmware will timeout and reset the device if no heartbeat is received after 5 seconds. The old scheme of 2 minutes is ineffective. tg3_write_mem_fast() is added to speed up the IO to send the heartbeat. When no workaround is needed, it will use direct MMIO to memory space to write to memory. Signed-off-by: Michael Chan Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 21 ++++++++++++++++----- drivers/net/tg3.h | 1 + 2 files changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index cf2204f5b7f9..479be21425fb 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -470,6 +470,15 @@ static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) spin_unlock_irqrestore(&tp->indirect_lock, flags); } +static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val) +{ + /* If no workaround is needed, write to mem space directly */ + if (tp->write32 != tg3_write_indirect_reg32) + tw32(NIC_SRAM_WIN_BASE + off, val); + else + tg3_write_mem(tp, off, val); +} + static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) { unsigned long flags; @@ -6195,14 +6204,16 @@ static void tg3_timer(unsigned long __opaque) tp->timer_counter = tp->timer_multiplier; } - /* Heartbeat is only sent once every 120 seconds. */ + /* Heartbeat is only sent once every 2 seconds. */ if (!--tp->asf_counter) { if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) { u32 val; - tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_ALIVE); - tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); - tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 3); + tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX, + FWCMD_NICDRV_ALIVE2); + tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); + /* 5 seconds timeout */ + tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5); val = tr32(GRC_RX_CPU_EVENT); val |= (1 << 14); tw32(GRC_RX_CPU_EVENT, val); @@ -6413,7 +6424,7 @@ static int tg3_open(struct net_device *dev) tp->timer_counter = tp->timer_multiplier = (HZ / tp->timer_offset); tp->asf_counter = tp->asf_multiplier = - ((HZ / tp->timer_offset) * 120); + ((HZ / tp->timer_offset) * 2); init_timer(&tp->timer); tp->timer.expires = jiffies + tp->timer_offset; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 456ef2b3d0ef..fb7e2a5f4a08 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1512,6 +1512,7 @@ #define FWCMD_NICDRV_IPV6ADDR_CHG 0x00000004 #define FWCMD_NICDRV_FIX_DMAR 0x00000005 #define FWCMD_NICDRV_FIX_DMAW 0x00000006 +#define FWCMD_NICDRV_ALIVE2 0x0000000d #define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c #define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80 #define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00 -- cgit v1.2.3 From 37ff238d68683d42e7363eee3303773906c336d9 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Oct 2005 15:49:51 -0700 Subject: [PATCH] tg3: update version and minor fixes Update version and reldate and add more sanity checking to tg3_set_settings(). Signed-off-by: Gary Zambrano Signed-off-by: Michael Chan Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 479be21425fb..551c9449322d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -67,8 +67,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.42" -#define DRV_MODULE_RELDATE "Oct 3, 2005" +#define DRV_MODULE_VERSION "3.43" +#define DRV_MODULE_RELDATE "Oct 24, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -7279,7 +7279,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct tg3 *tp = netdev_priv(dev); - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { + if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) { /* These are the only valid advertisement bits allowed. */ if (cmd->autoneg == AUTONEG_ENABLE && (cmd->advertising & ~(ADVERTISED_1000baseT_Half | @@ -7287,7 +7287,17 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) ADVERTISED_Autoneg | ADVERTISED_FIBRE))) return -EINVAL; - } + /* Fiber can only do SPEED_1000. */ + else if ((cmd->autoneg != AUTONEG_ENABLE) && + (cmd->speed != SPEED_1000)) + return -EINVAL; + /* Copper cannot force SPEED_1000. */ + } else if ((cmd->autoneg != AUTONEG_ENABLE) && + (cmd->speed == SPEED_1000)) + return -EINVAL; + else if ((cmd->speed == SPEED_1000) && + (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY)) + return -EINVAL; tg3_full_lock(tp, 0); -- cgit v1.2.3 From 0abe791e94033b727f2b55670c2966f3d3d3cf70 Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:46:53 -0600 Subject: [PATCH] ibmveth fix bonding This patch updates dev->trans_start and dev->last_rx so that the ibmveth driver can be used with the ARP monitor in the bonding driver. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index a2c4dd4fb221..5617bec7fd53 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -725,6 +725,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) } else { adapter->stats.tx_packets++; adapter->stats.tx_bytes += skb->len; + netdev->trans_start = jiffies; } do { @@ -776,6 +777,7 @@ static int ibmveth_poll(struct net_device *netdev, int *budget) adapter->stats.rx_packets++; adapter->stats.rx_bytes += length; frames_processed++; + netdev->last_rx = jiffies; } } else { more_work = 0; -- cgit v1.2.3 From b6d35182fe62e57d368062adcc880ca35119d88e Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:01 -0600 Subject: [PATCH] ibmveth fix buffer pool management This patch changes the way the ibmveth driver handles the receive buffers. The old code mallocs and maps all the buffers in the pools regardless of MTU size and it also limits the number of buffer pools to three. This patch makes the driver malloc and map the buffers necessary to support the current MTU. It also changes the hardcoded names of the buffer pool number, size, and elements to arrays to make it easier to change (with the hope of making them runtime parameters in the future). Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 102 ++++++++++++++++++++++++++++++++++++-------------- drivers/net/ibmveth.h | 18 +++++---- 2 files changed, 85 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 5617bec7fd53..d985b804a762 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -97,6 +97,7 @@ static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter); static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter); static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*); +static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter); #ifdef CONFIG_PROC_FS #define IBMVETH_PROC_DIR "net/ibmveth" @@ -181,6 +182,7 @@ static int ibmveth_alloc_buffer_pool(struct ibmveth_buff_pool *pool) atomic_set(&pool->available, 0); pool->producer_index = 0; pool->consumer_index = 0; + pool->active = 0; return 0; } @@ -258,9 +260,14 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc /* check if replenishing is needed. */ static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter) { - return ((atomic_read(&adapter->rx_buff_pool[0].available) < adapter->rx_buff_pool[0].threshold) || - (atomic_read(&adapter->rx_buff_pool[1].available) < adapter->rx_buff_pool[1].threshold) || - (atomic_read(&adapter->rx_buff_pool[2].available) < adapter->rx_buff_pool[2].threshold)); + int i; + + for(i = 0; i < IbmVethNumBufferPools; i++) + if(adapter->rx_buff_pool[i].active && + (atomic_read(&adapter->rx_buff_pool[i].available) < + adapter->rx_buff_pool[i].threshold)) + return 1; + return 0; } /* kick the replenish tasklet if we need replenishing and it isn't already running */ @@ -275,11 +282,14 @@ static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter /* replenish tasklet routine */ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) { + int i; + adapter->replenish_task_cycles++; - ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[0]); - ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[1]); - ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[2]); + for(i = 0; i < IbmVethNumBufferPools; i++) + if(adapter->rx_buff_pool[i].active) + ibmveth_replenish_buffer_pool(adapter, + &adapter->rx_buff_pool[i]); adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8); @@ -321,6 +331,7 @@ static void ibmveth_free_buffer_pool(struct ibmveth_adapter *adapter, struct ibm kfree(pool->skbuff); pool->skbuff = NULL; } + pool->active = 0; } /* remove a buffer from a pool */ @@ -379,6 +390,12 @@ static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) ibmveth_assert(pool < IbmVethNumBufferPools); ibmveth_assert(index < adapter->rx_buff_pool[pool].size); + if(!adapter->rx_buff_pool[pool].active) { + ibmveth_rxq_harvest_buffer(adapter); + ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]); + return; + } + desc.desc = 0; desc.fields.valid = 1; desc.fields.length = adapter->rx_buff_pool[pool].buff_size; @@ -409,6 +426,8 @@ static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter) static void ibmveth_cleanup(struct ibmveth_adapter *adapter) { + int i; + if(adapter->buffer_list_addr != NULL) { if(!dma_mapping_error(adapter->buffer_list_dma)) { dma_unmap_single(&adapter->vdev->dev, @@ -443,26 +462,24 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter) adapter->rx_queue.queue_addr = NULL; } - ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[0]); - ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[1]); - ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[2]); + for(i = 0; irx_buff_pool[i]); } static int ibmveth_open(struct net_device *netdev) { struct ibmveth_adapter *adapter = netdev->priv; u64 mac_address = 0; - int rxq_entries; + int rxq_entries = 1; unsigned long lpar_rc; int rc; union ibmveth_buf_desc rxq_desc; + int i; ibmveth_debug_printk("open starting\n"); - rxq_entries = - adapter->rx_buff_pool[0].size + - adapter->rx_buff_pool[1].size + - adapter->rx_buff_pool[2].size + 1; + for(i = 0; irx_buff_pool[i].size; adapter->buffer_list_addr = (void*) get_zeroed_page(GFP_KERNEL); adapter->filter_list_addr = (void*) get_zeroed_page(GFP_KERNEL); @@ -502,14 +519,8 @@ static int ibmveth_open(struct net_device *netdev) adapter->rx_queue.num_slots = rxq_entries; adapter->rx_queue.toggle = 1; - if(ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[0]) || - ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[1]) || - ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[2])) - { - ibmveth_error_printk("unable to allocate buffer pools\n"); - ibmveth_cleanup(adapter); - return -ENOMEM; - } + /* call change_mtu to init the buffer pools based in initial mtu */ + ibmveth_change_mtu(netdev, netdev->mtu); memcpy(&mac_address, netdev->dev_addr, netdev->addr_len); mac_address = mac_address >> 16; @@ -885,17 +896,52 @@ static void ibmveth_set_multicast_list(struct net_device *netdev) static int ibmveth_change_mtu(struct net_device *dev, int new_mtu) { - if ((new_mtu < 68) || (new_mtu > (1<<20))) + struct ibmveth_adapter *adapter = dev->priv; + int i; + int prev_smaller = 1; + + if ((new_mtu < 68) || + (new_mtu > (pool_size[IbmVethNumBufferPools-1]) - IBMVETH_BUFF_OH)) return -EINVAL; + + for(i = 0; i (pool_size[i] - IBMVETH_BUFF_OH)) { + activate = 1; + prev_smaller= 1; + } else { + if (prev_smaller) + activate = 1; + prev_smaller= 0; + } + + if (activate && !adapter->rx_buff_pool[i].active) { + struct ibmveth_buff_pool *pool = + &adapter->rx_buff_pool[i]; + if(ibmveth_alloc_buffer_pool(pool)) { + ibmveth_error_printk("unable to alloc pool\n"); + return -ENOMEM; + } + adapter->rx_buff_pool[i].active = 1; + } else if (!activate && adapter->rx_buff_pool[i].active) { + adapter->rx_buff_pool[i].active = 0; + h_free_logical_lan_buffer(adapter->vdev->unit_address, + (u64)pool_size[i]); + } + + } + + + ibmveth_schedule_replenishing(adapter); dev->mtu = new_mtu; return 0; } static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) { - int rc; + int rc, i; struct net_device *netdev; - struct ibmveth_adapter *adapter; + struct ibmveth_adapter *adapter = NULL; unsigned char *mac_addr_p; unsigned int *mcastFilterSize_p; @@ -965,9 +1011,9 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len); - ibmveth_init_buffer_pool(&adapter->rx_buff_pool[0], 0, IbmVethPool0DftCnt, IbmVethPool0DftSize); - ibmveth_init_buffer_pool(&adapter->rx_buff_pool[1], 1, IbmVethPool1DftCnt, IbmVethPool1DftSize); - ibmveth_init_buffer_pool(&adapter->rx_buff_pool[2], 2, IbmVethPool2DftCnt, IbmVethPool2DftSize); + for(i = 0; irx_buff_pool[i], i, + pool_count[i], pool_size[i]); ibmveth_debug_printk("adapter @ 0x%p\n", adapter); diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h index 51a470da9686..a5d27a9cdf1f 100644 --- a/drivers/net/ibmveth.h +++ b/drivers/net/ibmveth.h @@ -49,6 +49,7 @@ #define H_SEND_LOGICAL_LAN 0x120 #define H_MULTICAST_CTRL 0x130 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 /* hcall macros */ #define h_register_logical_lan(ua, buflst, rxq, fltlst, mac) \ @@ -69,13 +70,15 @@ #define h_change_logical_lan_mac(ua, mac) \ plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac) -#define IbmVethNumBufferPools 3 -#define IbmVethPool0DftSize (1024 * 2) -#define IbmVethPool1DftSize (1024 * 4) -#define IbmVethPool2DftSize (1024 * 10) -#define IbmVethPool0DftCnt 256 -#define IbmVethPool1DftCnt 256 -#define IbmVethPool2DftCnt 256 +#define h_free_logical_lan_buffer(ua, bufsize) \ + plpar_hcall_norets(H_FREE_LOGICAL_LAN_BUFFER, ua, bufsize) + +#define IbmVethNumBufferPools 5 +#define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */ + +/* pool_size should be sorted */ +static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 }; +static int pool_count[] = { 256, 768, 256, 256, 256 }; #define IBM_VETH_INVALID_MAP ((u16)0xffff) @@ -90,6 +93,7 @@ struct ibmveth_buff_pool { u16 *free_map; dma_addr_t *dma_addr; struct sk_buff **skbuff; + int active; }; struct ibmveth_rx_q { -- cgit v1.2.3 From e2adbcb480992de8a01acf9218e8bbd9b507fc6f Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:08 -0600 Subject: [PATCH] ibmveth fix buffer replenishing This patch removes the allocation of RX skb's buffers from a workqueue to be called directly at RX processing time. This change was suggested by Dave Miller when the driver was starving the RX buffers and deadlocking under heavy traffic: > Allocating RX SKBs via tasklet is, IMHO, the worst way to > do it. It is no surprise that there are starvation cases. > > If tasklets or work queues get delayed in any way, you lose, > and it's very easy for a card to catch up with the driver RX'ing > packets very fast, no matter how aggressive you make the > replenishing. By the time you detect that you need to be > "more aggressive" it is already too late. > The only pseudo-reliable way is to allocate at RX processing time. > Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 48 ++++++++---------------------------------------- drivers/net/ibmveth.h | 4 ---- 2 files changed, 8 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index d985b804a762..aea1598b2253 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -96,7 +96,6 @@ static void ibmveth_proc_unregister_driver(void); static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter); static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter); static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs); -static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*); static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter); #ifdef CONFIG_PROC_FS @@ -257,29 +256,7 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc atomic_add(buffers_added, &(pool->available)); } -/* check if replenishing is needed. */ -static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter) -{ - int i; - - for(i = 0; i < IbmVethNumBufferPools; i++) - if(adapter->rx_buff_pool[i].active && - (atomic_read(&adapter->rx_buff_pool[i].available) < - adapter->rx_buff_pool[i].threshold)) - return 1; - return 0; -} - -/* kick the replenish tasklet if we need replenishing and it isn't already running */ -static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter) -{ - if(ibmveth_is_replenishing_needed(adapter) && - (atomic_dec_if_positive(&adapter->not_replenishing) == 0)) { - schedule_work(&adapter->replenish_task); - } -} - -/* replenish tasklet routine */ +/* replenish routine */ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) { int i; @@ -292,10 +269,6 @@ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) &adapter->rx_buff_pool[i]); adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8); - - atomic_inc(&adapter->not_replenishing); - - ibmveth_schedule_replenishing(adapter); } /* empty and free ana buffer pool - also used to do cleanup in error paths */ @@ -563,10 +536,10 @@ static int ibmveth_open(struct net_device *netdev) return rc; } - netif_start_queue(netdev); + ibmveth_debug_printk("initial replenish cycle\n"); + ibmveth_replenish_task(adapter); - ibmveth_debug_printk("scheduling initial replenish cycle\n"); - ibmveth_schedule_replenishing(adapter); + netif_start_queue(netdev); ibmveth_debug_printk("open complete\n"); @@ -584,9 +557,6 @@ static int ibmveth_close(struct net_device *netdev) free_irq(netdev->irq, netdev); - cancel_delayed_work(&adapter->replenish_task); - flush_scheduled_work(); - do { lpar_rc = h_free_logical_lan(adapter->vdev->unit_address); } while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy)); @@ -795,7 +765,7 @@ static int ibmveth_poll(struct net_device *netdev, int *budget) } } while(more_work && (frames_processed < max_frames_to_process)); - ibmveth_schedule_replenishing(adapter); + ibmveth_replenish_task(adapter); if(more_work) { /* more work to do - return that we are not done yet */ @@ -931,8 +901,10 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu) } + /* kick the interrupt handler so that the new buffer pools get + replenished or deallocated */ + ibmveth_interrupt(dev->irq, dev, NULL); - ibmveth_schedule_replenishing(adapter); dev->mtu = new_mtu; return 0; } @@ -1017,14 +989,10 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ ibmveth_debug_printk("adapter @ 0x%p\n", adapter); - INIT_WORK(&adapter->replenish_task, (void*)ibmveth_replenish_task, (void*)adapter); - adapter->buffer_list_dma = DMA_ERROR_CODE; adapter->filter_list_dma = DMA_ERROR_CODE; adapter->rx_queue.queue_dma = DMA_ERROR_CODE; - atomic_set(&adapter->not_replenishing, 1); - ibmveth_debug_printk("registering netdev...\n"); rc = register_netdev(netdev); diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h index a5d27a9cdf1f..a3ea02937d63 100644 --- a/drivers/net/ibmveth.h +++ b/drivers/net/ibmveth.h @@ -118,10 +118,6 @@ struct ibmveth_adapter { dma_addr_t filter_list_dma; struct ibmveth_buff_pool rx_buff_pool[IbmVethNumBufferPools]; struct ibmveth_rx_q rx_queue; - atomic_t not_replenishing; - - /* helper tasks */ - struct work_struct replenish_task; /* adapter specific stats */ u64 replenish_task_cycles; -- cgit v1.2.3 From 60296d9e4be1cd9e096f7804ce6e839e0cbd97cf Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:16 -0600 Subject: [PATCH] ibmveth lockless TX This patch adds the lockless TX feature to the ibmveth driver. The hypervisor has its own locking so the only change that is necessary is to protect the statistics counters. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 44 +++++++++++++++++++++++++++++--------------- drivers/net/ibmveth.h | 1 + 2 files changed, 30 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index aea1598b2253..987bcba01889 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -621,12 +621,18 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) unsigned long lpar_rc; int nfrags = 0, curfrag; unsigned long correlator; + unsigned long flags; unsigned int retry_count; + unsigned int tx_dropped = 0; + unsigned int tx_bytes = 0; + unsigned int tx_packets = 0; + unsigned int tx_send_failed = 0; + unsigned int tx_map_failed = 0; + if ((skb_shinfo(skb)->nr_frags + 1) > IbmVethMaxSendFrags) { - adapter->stats.tx_dropped++; - dev_kfree_skb(skb); - return 0; + tx_dropped++; + goto out; } memset(&desc, 0, sizeof(desc)); @@ -645,10 +651,9 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) if(dma_mapping_error(desc[0].fields.address)) { ibmveth_error_printk("tx: unable to map initial fragment\n"); - adapter->tx_map_failed++; - adapter->stats.tx_dropped++; - dev_kfree_skb(skb); - return 0; + tx_map_failed++; + tx_dropped++; + goto out; } curfrag = nfrags; @@ -665,8 +670,8 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) if(dma_mapping_error(desc[curfrag+1].fields.address)) { ibmveth_error_printk("tx: unable to map fragment %d\n", curfrag); - adapter->tx_map_failed++; - adapter->stats.tx_dropped++; + tx_map_failed++; + tx_dropped++; /* Free all the mappings we just created */ while(curfrag < nfrags) { dma_unmap_single(&adapter->vdev->dev, @@ -675,8 +680,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) DMA_TO_DEVICE); curfrag++; } - dev_kfree_skb(skb); - return 0; + goto out; } } @@ -701,11 +705,11 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) ibmveth_error_printk("tx: desc[%i] valid=%d, len=%d, address=0x%d\n", i, desc[i].fields.valid, desc[i].fields.length, desc[i].fields.address); } - adapter->tx_send_failed++; - adapter->stats.tx_dropped++; + tx_send_failed++; + tx_dropped++; } else { - adapter->stats.tx_packets++; - adapter->stats.tx_bytes += skb->len; + tx_packets++; + tx_bytes += skb->len; netdev->trans_start = jiffies; } @@ -715,6 +719,14 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) desc[nfrags].fields.length, DMA_TO_DEVICE); } while(--nfrags >= 0); +out: spin_lock_irqsave(&adapter->stats_lock, flags); + adapter->stats.tx_dropped += tx_dropped; + adapter->stats.tx_bytes += tx_bytes; + adapter->stats.tx_packets += tx_packets; + adapter->tx_send_failed += tx_send_failed; + adapter->tx_map_failed += tx_map_failed; + spin_unlock_irqrestore(&adapter->stats_lock, flags); + dev_kfree_skb(skb); return 0; } @@ -980,6 +992,8 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ netdev->ethtool_ops = &netdev_ethtool_ops; netdev->change_mtu = ibmveth_change_mtu; SET_NETDEV_DEV(netdev, &dev->dev); + netdev->features |= NETIF_F_LLTX; + spin_lock_init(&adapter->stats_lock); memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len); diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h index a3ea02937d63..46919a814fca 100644 --- a/drivers/net/ibmveth.h +++ b/drivers/net/ibmveth.h @@ -131,6 +131,7 @@ struct ibmveth_adapter { u64 tx_linearize_failed; u64 tx_map_failed; u64 tx_send_failed; + spinlock_t stats_lock; }; struct ibmveth_buf_desc_fields { -- cgit v1.2.3 From 82702d37a559cf94fe238cd3f8ef63cf7fa699a9 Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:23 -0600 Subject: [PATCH] ibmveth fix failed addbuf This patch fixes a bug that happens when the hypervisor can't add a buffer. The old code wrote IBM_VETH_INVALID_MAP into the free_map array, so next time the index was used, a ibmveth_assert() caught it and called BUG(). The patch writes the right value into the free_map array so that the index can be reused. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 987bcba01889..f5819527ec9d 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -237,7 +237,7 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc); if(lpar_rc != H_Success) { - pool->free_map[free_index] = IBM_VETH_INVALID_MAP; + pool->free_map[free_index] = index; pool->skbuff[index] = NULL; pool->consumer_index--; dma_unmap_single(&adapter->vdev->dev, -- cgit v1.2.3 From d89a64bedf956ef0b406018a7cb76e027fe3e751 Mon Sep 17 00:00:00 2001 From: Komuro Date: Fri, 28 Oct 2005 16:09:54 -0400 Subject: pcnet_cs: fix mii init code for older DL10019 based cards Some older DL10019 based cards need to setup the auto-negotiation-advertisement register to advertise 100Full,100Half,10Full and 10Half. Signed-off-by: Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/pcnet_cs.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 9f22d138e3ad..818c185d6438 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1020,6 +1020,12 @@ static void set_misc_reg(struct net_device *dev) } else { outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); } + } else if (info->flags & IS_DL10019) { + /* Advertise 100F, 100H, 10F, 10H */ + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); + /* Restart MII autonegotiation */ + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); } } -- cgit v1.2.3 From 008d55903a1e9e179ff1d366dfcfa9b72abd116d Mon Sep 17 00:00:00 2001 From: Roger While Date: Fri, 28 Oct 2005 16:11:49 -0400 Subject: [wireless prism54] Fix frame length prism54 is leaking information when passing transmits to the firmware. There is no requirement to adjust the length to >= ETH_ZLEN. Just pass the skb length (after possible adjustment). Signed-off-by: Roger While Signed-off-by: Jeff Garzik --- drivers/net/wireless/prism54/islpci_eth.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 5952e9960499..0975dd4ed77d 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -97,12 +97,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) /* lock the driver code */ spin_lock_irqsave(&priv->slock, flags); - /* determine the amount of fragments needed to store the frame */ - - frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - if (init_wds) - frame_size += 6; - /* check whether the destination queue has enough fragments for the frame */ curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]); if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) { @@ -213,6 +207,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) /* store the skb address for future freeing */ priv->data_low_tx[index] = skb; /* set the proper fragment start address and size information */ + frame_size = skb->len; fragment->size = cpu_to_le16(frame_size); fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */ fragment->address = cpu_to_le32(pci_map_address); -- cgit v1.2.3 From 9eb343aeb3e106c1e4c07e2863f45b2c121b3b78 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 21 Oct 2005 19:06:42 +0900 Subject: [PATCH] s2io: kconfig help fix The documentation about s2io is available at Documentation/networking/s2io.txt. Signed-off-by: Akinobu Mita Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5148d47492a0..8fa0e26fa805 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2201,8 +2201,8 @@ config S2IO depends on PCI ---help--- This driver supports the 10Gbe XFrame NIC of S2IO. - For help regarding driver compilation, installation and - tuning please look into ~/drivers/net/s2io/README.txt. + More specific information on configuring the driver is in + . config S2IO_NAPI bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" -- cgit v1.2.3 From adf6e00064ebcd3d82009ba6ef66f489f0885ebd Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 4 Oct 2005 11:25:17 -0600 Subject: [PATCH] b44 reports wrong advertised flags Looks like someone used the MII constants instead of the ethtool constants. Signed-off-by: Matthew Wilcox Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 282ebd15f011..225d14fd9239 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1619,14 +1619,14 @@ static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->advertising = 0; if (bp->flags & B44_FLAG_ADV_10HALF) - cmd->advertising |= ADVERTISE_10HALF; + cmd->advertising |= ADVERTISED_10baseT_Half; if (bp->flags & B44_FLAG_ADV_10FULL) - cmd->advertising |= ADVERTISE_10FULL; + cmd->advertising |= ADVERTISED_10baseT_Full; if (bp->flags & B44_FLAG_ADV_100HALF) - cmd->advertising |= ADVERTISE_100HALF; + cmd->advertising |= ADVERTISED_100baseT_Half; if (bp->flags & B44_FLAG_ADV_100FULL) - cmd->advertising |= ADVERTISE_100FULL; - cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + cmd->advertising |= ADVERTISED_100baseT_Full; + cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ? SPEED_100 : SPEED_10; cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ? -- cgit v1.2.3 From 8fee5f51a56aa7a67d955993572a2ae05d31a2c6 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Wed, 5 Oct 2005 23:29:58 +0200 Subject: [PATCH] sis190.c: fix multicast MAC filter Here is a patch that changes the way the MAC filter is computed for the multicast addresses. The computation is taken from the SiS GPL driver. This patch is necessary to get IPv6 working. Signed-off-by: Aurelien Jarno Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 92f75529eff8..478791e09bf7 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -842,7 +842,7 @@ static void sis190_set_rx_mode(struct net_device *dev) for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { int bit_nr = - ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f; mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); rx_mode |= AcceptMulticast; } -- cgit v1.2.3 From 99e1baf869cf20791e66e38facd51d14b28551f8 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 5 Oct 2005 11:10:24 -0400 Subject: [PATCH] smc91x: shut down power after probing If the interface is not used right away after being probed it wastes power needlessly. Noted by Holger Schurig. Signed-off-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1438fdd20826..c5bc8ae84dd3 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1983,6 +1983,10 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) if (lp->version >= (CHIP_91100 << 4)) smc_phy_detect(dev); + /* then shut everything down to save power */ + smc_shutdown(dev); + smc_phy_powerdown(dev); + /* Set default parameters */ lp->msg_enable = NETIF_MSG_LINK; lp->ctl_rfduplx = 0; -- cgit v1.2.3 From 712cb1ebb1653538527500165d8382ca48a7fca1 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Sun, 23 Oct 2005 13:41:35 -0700 Subject: [PATCH] Fix CS89x0 KConfig for IXDP2X01 IXDP2x01 systems can be built without PCI network cards, so we should not require NET_PCI to build CS89x0 on these systems. Signed-off-by: Deepak Saxena Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8fa0e26fa805..814a93b8c903 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1338,7 +1338,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 + depends on (NET_PCI && ISA) || ARCH_PNX0105 || ARCH_IXDP2X01 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the -- cgit v1.2.3 From d8840ac907c7943bc7e196b11812adfa95cb28ef Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 7 Oct 2005 02:05:23 +0400 Subject: [PATCH] starfire: free_irq() on error path of netdev_open() Signed-off-by: Alexey Dobriyan Signed-off-by: Jeff Garzik --- drivers/net/starfire.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index efdb179ecc8c..38b2b0a3ce96 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1091,8 +1091,10 @@ static int netdev_open(struct net_device *dev) rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE; np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size; np->queue_mem = pci_alloc_consistent(np->pci_dev, np->queue_mem_size, &np->queue_mem_dma); - if (np->queue_mem == 0) + if (np->queue_mem == NULL) { + free_irq(dev->irq, dev); return -ENOMEM; + } np->tx_done_q = np->queue_mem; np->tx_done_q_dma = np->queue_mem_dma; -- cgit v1.2.3 From 48257c4f168e5d040394aeca4d37b59f68e0d36b Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Fri, 28 Oct 2005 16:25:58 -0400 Subject: Add fs_enet ethernet network driver, for several embedded platforms. --- drivers/net/Kconfig | 1 + drivers/net/Makefile | 3 + drivers/net/fs_enet/Kconfig | 20 + drivers/net/fs_enet/Makefile | 10 + drivers/net/fs_enet/fs_enet-main.c | 1226 ++++++++++++++++++++++++++++++++++++ drivers/net/fs_enet/fs_enet-mii.c | 507 +++++++++++++++ drivers/net/fs_enet/fs_enet.h | 245 +++++++ drivers/net/fs_enet/mac-fcc.c | 578 +++++++++++++++++ drivers/net/fs_enet/mac-fec.c | 653 +++++++++++++++++++ drivers/net/fs_enet/mac-scc.c | 524 +++++++++++++++ drivers/net/fs_enet/mii-bitbang.c | 405 ++++++++++++ drivers/net/fs_enet/mii-fixed.c | 92 +++ include/linux/fs_enet_pd.h | 136 ++++ 13 files changed, 4400 insertions(+) create mode 100644 drivers/net/fs_enet/Kconfig create mode 100644 drivers/net/fs_enet/Makefile create mode 100644 drivers/net/fs_enet/fs_enet-main.c create mode 100644 drivers/net/fs_enet/fs_enet-mii.c create mode 100644 drivers/net/fs_enet/fs_enet.h create mode 100644 drivers/net/fs_enet/mac-fcc.c create mode 100644 drivers/net/fs_enet/mac-fec.c create mode 100644 drivers/net/fs_enet/mac-scc.c create mode 100644 drivers/net/fs_enet/mii-bitbang.c create mode 100644 drivers/net/fs_enet/mii-fixed.c create mode 100644 include/linux/fs_enet_pd.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 814a93b8c903..27732fdeeea4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1775,6 +1775,7 @@ config NE_H8300 controller on the Renesas H8/300 processor. source "drivers/net/fec_8xx/Kconfig" +source "drivers/net/fs_enet/Kconfig" endmenu diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1a84e0435f64..7c313cb341b8 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -203,3 +203,6 @@ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ obj-$(CONFIG_NETCONSOLE) += netconsole.o + +obj-$(CONFIG_FS_ENET) += fs_enet/ + diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig new file mode 100644 index 000000000000..6aaee67dd4b7 --- /dev/null +++ b/drivers/net/fs_enet/Kconfig @@ -0,0 +1,20 @@ +config FS_ENET + tristate "Freescale Ethernet Driver" + depends on NET_ETHERNET && (CPM1 || CPM2) + select MII + +config FS_ENET_HAS_SCC + bool "Chip has an SCC usable for ethernet" + depends on FS_ENET && (CPM1 || CPM2) + default y + +config FS_ENET_HAS_FCC + bool "Chip has an FCC usable for ethernet" + depends on FS_ENET && CPM2 + default y + +config FS_ENET_HAS_FEC + bool "Chip has an FEC usable for ethernet" + depends on FS_ENET && CPM1 + default y + diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile new file mode 100644 index 000000000000..d6dd3f2fb43e --- /dev/null +++ b/drivers/net/fs_enet/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the Freescale Ethernet controllers +# + +obj-$(CONFIG_FS_ENET) += fs_enet.o + +obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o +obj-$(CONFIG_8260) += mac-fcc.o + +fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c new file mode 100644 index 000000000000..44fac7373289 --- /dev/null +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -0,0 +1,1226 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * Heavily based on original FEC driver by Dan Malek + * and modifications by Joakim Tjernlund + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +/*************************************************/ + +static char version[] __devinitdata = + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n"; + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("Freescale Ethernet Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +MODULE_PARM(fs_enet_debug, "i"); +MODULE_PARM_DESC(fs_enet_debug, + "Freescale bitmapped debugging message enable value"); + +int fs_enet_debug = -1; /* -1 == use FS_ENET_DEF_MSG_ENABLE as value */ + +static void fs_set_multicast_list(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + (*fep->ops->set_multicast_list)(dev); +} + +/* NAPI receive function */ +static int fs_enet_rx_napi(struct net_device *dev, int *budget) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + cbd_t *bdp; + struct sk_buff *skb, *skbn, *skbt; + int received = 0; + u16 pkt_len, sc; + int curidx; + int rx_work_limit = 0; /* pacify gcc */ + + rx_work_limit = min(dev->quota, *budget); + + if (!netif_running(dev)) + return 0; + + /* + * First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = fep->cur_rx; + + /* clear RX status bits for napi*/ + (*fep->ops->napi_clear_rx_event)(dev); + + while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) { + + curidx = bdp - fep->rx_bd_base; + + /* + * Since we have allocated space to hold a complete frame, + * the last indicator should be set. + */ + if ((sc & BD_ENET_RX_LAST) == 0) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s rcv is not +last\n", + dev->name); + + /* + * Check for errors. + */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL | + BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { + fep->stats.rx_errors++; + /* Frame too long or too short. */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) + fep->stats.rx_length_errors++; + /* Frame alignment */ + if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL)) + fep->stats.rx_frame_errors++; + /* CRC Error */ + if (sc & BD_ENET_RX_CR) + fep->stats.rx_crc_errors++; + /* FIFO overrun */ + if (sc & BD_ENET_RX_OV) + fep->stats.rx_crc_errors++; + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + skbn = skb; + + } else { + + /* napi, got packet but no quota */ + if (--rx_work_limit < 0) + break; + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + /* + * Process the incoming frame. + */ + fep->stats.rx_packets++; + pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */ + fep->stats.rx_bytes += pkt_len + 4; + + if (pkt_len <= fpi->rx_copybreak) { + /* +2 to make IP header L1 cache aligned */ + skbn = dev_alloc_skb(pkt_len + 2); + if (skbn != NULL) { + skb_reserve(skbn, 2); /* align IP header */ + memcpy(skbn->data, skb->data, pkt_len); + /* swap */ + skbt = skb; + skb = skbn; + skbn = skbt; + } + } else + skbn = dev_alloc_skb(ENET_RX_FRSIZE); + + if (skbn != NULL) { + skb->dev = dev; + skb_put(skb, pkt_len); /* Make room */ + skb->protocol = eth_type_trans(skb, dev); + received++; + netif_receive_skb(skb); + } else { + printk(KERN_WARNING DRV_MODULE_NAME + ": %s Memory squeeze, dropping packet.\n", + dev->name); + fep->stats.rx_dropped++; + skbn = skb; + } + } + + fep->rx_skbuff[curidx] = skbn; + CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE)); + CBDW_DATLEN(bdp, 0); + CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY); + + /* + * Update BD pointer to next entry. + */ + if ((sc & BD_ENET_RX_WRAP) == 0) + bdp++; + else + bdp = fep->rx_bd_base; + + (*fep->ops->rx_bd_done)(dev); + } + + fep->cur_rx = bdp; + + dev->quota -= received; + *budget -= received; + + if (rx_work_limit < 0) + return 1; /* not done */ + + /* done */ + netif_rx_complete(dev); + + (*fep->ops->napi_enable_rx)(dev); + + return 0; +} + +/* non NAPI receive function */ +static int fs_enet_rx_non_napi(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + cbd_t *bdp; + struct sk_buff *skb, *skbn, *skbt; + int received = 0; + u16 pkt_len, sc; + int curidx; + /* + * First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = fep->cur_rx; + + while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) { + + curidx = bdp - fep->rx_bd_base; + + /* + * Since we have allocated space to hold a complete frame, + * the last indicator should be set. + */ + if ((sc & BD_ENET_RX_LAST) == 0) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s rcv is not +last\n", + dev->name); + + /* + * Check for errors. + */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL | + BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { + fep->stats.rx_errors++; + /* Frame too long or too short. */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) + fep->stats.rx_length_errors++; + /* Frame alignment */ + if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL)) + fep->stats.rx_frame_errors++; + /* CRC Error */ + if (sc & BD_ENET_RX_CR) + fep->stats.rx_crc_errors++; + /* FIFO overrun */ + if (sc & BD_ENET_RX_OV) + fep->stats.rx_crc_errors++; + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + skbn = skb; + + } else { + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + /* + * Process the incoming frame. + */ + fep->stats.rx_packets++; + pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */ + fep->stats.rx_bytes += pkt_len + 4; + + if (pkt_len <= fpi->rx_copybreak) { + /* +2 to make IP header L1 cache aligned */ + skbn = dev_alloc_skb(pkt_len + 2); + if (skbn != NULL) { + skb_reserve(skbn, 2); /* align IP header */ + memcpy(skbn->data, skb->data, pkt_len); + /* swap */ + skbt = skb; + skb = skbn; + skbn = skbt; + } + } else + skbn = dev_alloc_skb(ENET_RX_FRSIZE); + + if (skbn != NULL) { + skb->dev = dev; + skb_put(skb, pkt_len); /* Make room */ + skb->protocol = eth_type_trans(skb, dev); + received++; + netif_rx(skb); + } else { + printk(KERN_WARNING DRV_MODULE_NAME + ": %s Memory squeeze, dropping packet.\n", + dev->name); + fep->stats.rx_dropped++; + skbn = skb; + } + } + + fep->rx_skbuff[curidx] = skbn; + CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE)); + CBDW_DATLEN(bdp, 0); + CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY); + + /* + * Update BD pointer to next entry. + */ + if ((sc & BD_ENET_RX_WRAP) == 0) + bdp++; + else + bdp = fep->rx_bd_base; + + (*fep->ops->rx_bd_done)(dev); + } + + fep->cur_rx = bdp; + + return 0; +} + +static void fs_enet_tx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + cbd_t *bdp; + struct sk_buff *skb; + int dirtyidx, do_wake, do_restart; + u16 sc; + + spin_lock(&fep->lock); + bdp = fep->dirty_tx; + + do_wake = do_restart = 0; + while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) { + + dirtyidx = bdp - fep->tx_bd_base; + + if (fep->tx_free == fep->tx_ring) + break; + + skb = fep->tx_skbuff[dirtyidx]; + + /* + * Check for errors. + */ + if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC | + BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) { + + if (sc & BD_ENET_TX_HB) /* No heartbeat */ + fep->stats.tx_heartbeat_errors++; + if (sc & BD_ENET_TX_LC) /* Late collision */ + fep->stats.tx_window_errors++; + if (sc & BD_ENET_TX_RL) /* Retrans limit */ + fep->stats.tx_aborted_errors++; + if (sc & BD_ENET_TX_UN) /* Underrun */ + fep->stats.tx_fifo_errors++; + if (sc & BD_ENET_TX_CSL) /* Carrier lost */ + fep->stats.tx_carrier_errors++; + + if (sc & (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) { + fep->stats.tx_errors++; + do_restart = 1; + } + } else + fep->stats.tx_packets++; + + if (sc & BD_ENET_TX_READY) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s HEY! Enet xmit interrupt and TX_READY.\n", + dev->name); + + /* + * Deferred means some collisions occurred during transmit, + * but we eventually sent the packet OK. + */ + if (sc & BD_ENET_TX_DEF) + fep->stats.collisions++; + + /* unmap */ + dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE); + + /* + * Free the sk buffer associated with this last transmit. + */ + dev_kfree_skb_irq(skb); + fep->tx_skbuff[dirtyidx] = NULL; + + /* + * Update pointer to next buffer descriptor to be transmitted. + */ + if ((sc & BD_ENET_TX_WRAP) == 0) + bdp++; + else + bdp = fep->tx_bd_base; + + /* + * Since we have freed up a buffer, the ring is no longer + * full. + */ + if (!fep->tx_free++) + do_wake = 1; + } + + fep->dirty_tx = bdp; + + if (do_restart) + (*fep->ops->tx_restart)(dev); + + spin_unlock(&fep->lock); + + if (do_wake) + netif_wake_queue(dev); +} + +/* + * The interrupt handler. + * This is called from the MPC core interrupt. + */ +static irqreturn_t +fs_enet_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct fs_enet_private *fep; + const struct fs_platform_info *fpi; + u32 int_events; + u32 int_clr_events; + int nr, napi_ok; + int handled; + + fep = netdev_priv(dev); + fpi = fep->fpi; + + nr = 0; + while ((int_events = (*fep->ops->get_int_events)(dev)) != 0) { + + nr++; + + int_clr_events = int_events; + if (fpi->use_napi) + int_clr_events &= ~fep->ev_napi_rx; + + (*fep->ops->clear_int_events)(dev, int_clr_events); + + if (int_events & fep->ev_err) + (*fep->ops->ev_error)(dev, int_events); + + if (int_events & fep->ev_rx) { + if (!fpi->use_napi) + fs_enet_rx_non_napi(dev); + else { + napi_ok = netif_rx_schedule_prep(dev); + + (*fep->ops->napi_disable_rx)(dev); + (*fep->ops->clear_int_events)(dev, fep->ev_napi_rx); + + /* NOTE: it is possible for FCCs in NAPI mode */ + /* to submit a spurious interrupt while in poll */ + if (napi_ok) + __netif_rx_schedule(dev); + } + } + + if (int_events & fep->ev_tx) + fs_enet_tx(dev); + } + + handled = nr > 0; + return IRQ_RETVAL(handled); +} + +void fs_init_bds(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + cbd_t *bdp; + struct sk_buff *skb; + int i; + + fs_cleanup_bds(dev); + + fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; + fep->tx_free = fep->tx_ring; + fep->cur_rx = fep->rx_bd_base; + + /* + * Initialize the receive buffer descriptors. + */ + for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) { + skb = dev_alloc_skb(ENET_RX_FRSIZE); + if (skb == NULL) { + printk(KERN_WARNING DRV_MODULE_NAME + ": %s Memory squeeze, unable to allocate skb\n", + dev->name); + break; + } + fep->rx_skbuff[i] = skb; + skb->dev = dev; + CBDW_BUFADDR(bdp, + dma_map_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE)); + CBDW_DATLEN(bdp, 0); /* zero */ + CBDW_SC(bdp, BD_ENET_RX_EMPTY | + ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP)); + } + /* + * if we failed, fillup remainder + */ + for (; i < fep->rx_ring; i++, bdp++) { + fep->rx_skbuff[i] = NULL; + CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP); + } + + /* + * ...and the same for transmit. + */ + for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) { + fep->tx_skbuff[i] = NULL; + CBDW_BUFADDR(bdp, 0); + CBDW_DATLEN(bdp, 0); + CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP); + } +} + +void fs_cleanup_bds(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct sk_buff *skb; + int i; + + /* + * Reset SKB transmit buffers. + */ + for (i = 0; i < fep->tx_ring; i++) { + if ((skb = fep->tx_skbuff[i]) == NULL) + continue; + + /* unmap */ + dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE); + + fep->tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + } + + /* + * Reset SKB receive buffers + */ + for (i = 0; i < fep->rx_ring; i++) { + if ((skb = fep->rx_skbuff[i]) == NULL) + continue; + + /* unmap */ + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + fep->rx_skbuff[i] = NULL; + + dev_kfree_skb(skb); + } +} + +/**********************************************************************************/ + +static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + cbd_t *bdp; + int curidx; + u16 sc; + unsigned long flags; + + spin_lock_irqsave(&fep->tx_lock, flags); + + /* + * Fill in a Tx ring entry + */ + bdp = fep->cur_tx; + + if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&fep->tx_lock, flags); + + /* + * Ooops. All transmit buffers are full. Bail out. + * This should not happen, since the tx queue should be stopped. + */ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s tx queue full!.\n", dev->name); + return NETDEV_TX_BUSY; + } + + curidx = bdp - fep->tx_bd_base; + /* + * Clear all of the status flags. + */ + CBDC_SC(bdp, BD_ENET_TX_STATS); + + /* + * Save skb pointer. + */ + fep->tx_skbuff[curidx] = skb; + + fep->stats.tx_bytes += skb->len; + + /* + * Push the data cache so the CPM does not get stale memory data. + */ + CBDW_BUFADDR(bdp, dma_map_single(fep->dev, + skb->data, skb->len, DMA_TO_DEVICE)); + CBDW_DATLEN(bdp, skb->len); + + dev->trans_start = jiffies; + + /* + * If this was the last BD in the ring, start at the beginning again. + */ + if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0) + fep->cur_tx++; + else + fep->cur_tx = fep->tx_bd_base; + + if (!--fep->tx_free) + netif_stop_queue(dev); + + /* Trigger transmission start */ + sc = BD_ENET_TX_READY | BD_ENET_TX_INTR | + BD_ENET_TX_LAST | BD_ENET_TX_TC; + + /* note that while FEC does not have this bit + * it marks it as available for software use + * yay for hw reuse :) */ + if (skb->len <= 60) + sc |= BD_ENET_TX_PAD; + CBDS_SC(bdp, sc); + + (*fep->ops->tx_kickstart)(dev); + + spin_unlock_irqrestore(&fep->tx_lock, flags); + + return NETDEV_TX_OK; +} + +static int fs_request_irq(struct net_device *dev, int irq, const char *name, + irqreturn_t (*irqf)(int irq, void *dev_id, struct pt_regs *regs)) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + (*fep->ops->pre_request_irq)(dev, irq); + return request_irq(irq, irqf, SA_SHIRQ, name, dev); +} + +static void fs_free_irq(struct net_device *dev, int irq) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + free_irq(irq, dev); + (*fep->ops->post_free_irq)(dev, irq); +} + +/**********************************************************************************/ + +/* This interrupt occurs when the PHY detects a link change. */ +static irqreturn_t +fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct fs_enet_private *fep; + const struct fs_platform_info *fpi; + + fep = netdev_priv(dev); + fpi = fep->fpi; + + /* + * Acknowledge the interrupt if possible. If we have not + * found the PHY yet we can't process or acknowledge the + * interrupt now. Instead we ignore this interrupt for now, + * which we can do since it is edge triggered. It will be + * acknowledged later by fs_enet_open(). + */ + if (!fep->phy) + return IRQ_NONE; + + fs_mii_ack_int(dev); + fs_mii_link_status_change_check(dev, 0); + + return IRQ_HANDLED; +} + +static void fs_timeout(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int wake = 0; + + fep->stats.tx_errors++; + + spin_lock_irqsave(&fep->lock, flags); + + if (dev->flags & IFF_UP) { + (*fep->ops->stop)(dev); + (*fep->ops->restart)(dev); + } + + wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY); + spin_unlock_irqrestore(&fep->lock, flags); + + if (wake) + netif_wake_queue(dev); +} + +static int fs_enet_open(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + int r; + + /* Install our interrupt handler. */ + r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s Could not allocate FEC IRQ!", dev->name); + return -EINVAL; + } + + /* Install our phy interrupt handler */ + if (fpi->phy_irq != -1) { + + r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s Could not allocate PHY IRQ!", dev->name); + fs_free_irq(dev, fep->interrupt); + return -EINVAL; + } + } + + fs_mii_startup(dev); + netif_carrier_off(dev); + fs_mii_link_status_change_check(dev, 1); + + return 0; +} + +static int fs_enet_close(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + unsigned long flags; + + netif_stop_queue(dev); + netif_carrier_off(dev); + fs_mii_shutdown(dev); + + spin_lock_irqsave(&fep->lock, flags); + (*fep->ops->stop)(dev); + spin_unlock_irqrestore(&fep->lock, flags); + + /* release any irqs */ + if (fpi->phy_irq != -1) + fs_free_irq(dev, fpi->phy_irq); + fs_free_irq(dev, fep->interrupt); + + return 0; +} + +static struct net_device_stats *fs_enet_get_stats(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + return &fep->stats; +} + +/*************************************************************************/ + +static void fs_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_MODULE_NAME); + strcpy(info->version, DRV_MODULE_VERSION); +} + +static int fs_get_regs_len(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + return (*fep->ops->get_regs_len)(dev); +} + +static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int r, len; + + len = regs->len; + + spin_lock_irqsave(&fep->lock, flags); + r = (*fep->ops->get_regs)(dev, p, &len); + spin_unlock_irqrestore(&fep->lock, flags); + + if (r == 0) + regs->version = 0; +} + +static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int rc; + + spin_lock_irqsave(&fep->lock, flags); + rc = mii_ethtool_gset(&fep->mii_if, cmd); + spin_unlock_irqrestore(&fep->lock, flags); + + return rc; +} + +static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int rc; + + spin_lock_irqsave(&fep->lock, flags); + rc = mii_ethtool_sset(&fep->mii_if, cmd); + spin_unlock_irqrestore(&fep->lock, flags); + + return rc; +} + +static int fs_nway_reset(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + return mii_nway_restart(&fep->mii_if); +} + +static u32 fs_get_msglevel(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + return fep->msg_enable; +} + +static void fs_set_msglevel(struct net_device *dev, u32 value) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fep->msg_enable = value; +} + +static struct ethtool_ops fs_ethtool_ops = { + .get_drvinfo = fs_get_drvinfo, + .get_regs_len = fs_get_regs_len, + .get_settings = fs_get_settings, + .set_settings = fs_set_settings, + .nway_reset = fs_nway_reset, + .get_link = ethtool_op_get_link, + .get_msglevel = fs_get_msglevel, + .set_msglevel = fs_set_msglevel, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, /* local! */ + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_regs = fs_get_regs, +}; + +static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data; + unsigned long flags; + int rc; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irqsave(&fep->lock, flags); + rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL); + spin_unlock_irqrestore(&fep->lock, flags); + return rc; +} + +extern int fs_mii_connect(struct net_device *dev); +extern void fs_mii_disconnect(struct net_device *dev); + +static struct net_device *fs_init_instance(struct device *dev, + const struct fs_platform_info *fpi) +{ + struct net_device *ndev = NULL; + struct fs_enet_private *fep = NULL; + int privsize, i, r, err = 0, registered = 0; + + /* guard */ + if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX) + return ERR_PTR(-EINVAL); + + privsize = sizeof(*fep) + (sizeof(struct sk_buff **) * + (fpi->rx_ring + fpi->tx_ring)); + + ndev = alloc_etherdev(privsize); + if (!ndev) { + err = -ENOMEM; + goto err; + } + SET_MODULE_OWNER(ndev); + + fep = netdev_priv(ndev); + memset(fep, 0, privsize); /* clear everything */ + + fep->dev = dev; + dev_set_drvdata(dev, ndev); + fep->fpi = fpi; + if (fpi->init_ioports) + fpi->init_ioports(); + +#ifdef CONFIG_FS_ENET_HAS_FEC + if (fs_get_fec_index(fpi->fs_no) >= 0) + fep->ops = &fs_fec_ops; +#endif + +#ifdef CONFIG_FS_ENET_HAS_SCC + if (fs_get_scc_index(fpi->fs_no) >=0 ) + fep->ops = &fs_scc_ops; +#endif + +#ifdef CONFIG_FS_ENET_HAS_FCC + if (fs_get_fcc_index(fpi->fs_no) >= 0) + fep->ops = &fs_fcc_ops; +#endif + + if (fep->ops == NULL) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s No matching ops found (%d).\n", + ndev->name, fpi->fs_no); + err = -EINVAL; + goto err; + } + + r = (*fep->ops->setup_data)(ndev); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s setup_data failed\n", + ndev->name); + err = r; + goto err; + } + + /* point rx_skbuff, tx_skbuff */ + fep->rx_skbuff = (struct sk_buff **)&fep[1]; + fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring; + + /* init locks */ + spin_lock_init(&fep->lock); + spin_lock_init(&fep->tx_lock); + + /* + * Set the Ethernet address. + */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = fpi->macaddr[i]; + + r = (*fep->ops->allocate_bd)(ndev); + + if (fep->ring_base == NULL) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r); + err = r; + goto err; + } + + /* + * Set receive and transmit descriptor base. + */ + fep->rx_bd_base = fep->ring_base; + fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring; + + /* initialize ring size variables */ + fep->tx_ring = fpi->tx_ring; + fep->rx_ring = fpi->rx_ring; + + /* + * The FEC Ethernet specific entries in the device structure. + */ + ndev->open = fs_enet_open; + ndev->hard_start_xmit = fs_enet_start_xmit; + ndev->tx_timeout = fs_timeout; + ndev->watchdog_timeo = 2 * HZ; + ndev->stop = fs_enet_close; + ndev->get_stats = fs_enet_get_stats; + ndev->set_multicast_list = fs_set_multicast_list; + if (fpi->use_napi) { + ndev->poll = fs_enet_rx_napi; + ndev->weight = fpi->napi_weight; + } + ndev->ethtool_ops = &fs_ethtool_ops; + ndev->do_ioctl = fs_ioctl; + + init_timer(&fep->phy_timer_list); + + netif_carrier_off(ndev); + + err = register_netdev(ndev); + if (err != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s register_netdev failed.\n", ndev->name); + goto err; + } + registered = 1; + + err = fs_mii_connect(ndev); + if (err != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s fs_mii_connect failed.\n", ndev->name); + goto err; + } + + return ndev; + + err: + if (ndev != NULL) { + + if (registered) + unregister_netdev(ndev); + + if (fep != NULL) { + (*fep->ops->free_bd)(ndev); + (*fep->ops->cleanup_data)(ndev); + } + + free_netdev(ndev); + } + + dev_set_drvdata(dev, NULL); + + return ERR_PTR(err); +} + +static int fs_cleanup_instance(struct net_device *ndev) +{ + struct fs_enet_private *fep; + const struct fs_platform_info *fpi; + struct device *dev; + + if (ndev == NULL) + return -EINVAL; + + fep = netdev_priv(ndev); + if (fep == NULL) + return -EINVAL; + + fpi = fep->fpi; + + fs_mii_disconnect(ndev); + + unregister_netdev(ndev); + + dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), + fep->ring_base, fep->ring_mem_addr); + + /* reset it */ + (*fep->ops->cleanup_data)(ndev); + + dev = fep->dev; + if (dev != NULL) { + dev_set_drvdata(dev, NULL); + fep->dev = NULL; + } + + free_netdev(ndev); + + return 0; +} + +/**************************************************************************************/ + +/* handy pointer to the immap */ +void *fs_enet_immap = NULL; + +static int setup_immap(void) +{ + phys_addr_t paddr = 0; + unsigned long size = 0; + +#ifdef CONFIG_CPM1 + paddr = IMAP_ADDR; + size = 0x10000; /* map 64K */ +#endif + +#ifdef CONFIG_CPM2 + paddr = CPM_MAP_ADDR; + size = 0x40000; /* map 256 K */ +#endif + fs_enet_immap = ioremap(paddr, size); + if (fs_enet_immap == NULL) + return -EBADF; /* XXX ahem; maybe just BUG_ON? */ + + return 0; +} + +static void cleanup_immap(void) +{ + if (fs_enet_immap != NULL) { + iounmap(fs_enet_immap); + fs_enet_immap = NULL; + } +} + +/**************************************************************************************/ + +static int __devinit fs_enet_probe(struct device *dev) +{ + struct net_device *ndev; + + /* no fixup - no device */ + if (dev->platform_data == NULL) { + printk(KERN_INFO "fs_enet: " + "probe called with no platform data; " + "remove unused devices\n"); + return -ENODEV; + } + + ndev = fs_init_instance(dev, dev->platform_data); + if (IS_ERR(ndev)) + return PTR_ERR(ndev); + return 0; +} + +static int fs_enet_remove(struct device *dev) +{ + return fs_cleanup_instance(dev_get_drvdata(dev)); +} + +static struct device_driver fs_enet_fec_driver = { + .name = "fsl-cpm-fec", + .bus = &platform_bus_type, + .probe = fs_enet_probe, + .remove = fs_enet_remove, +#ifdef CONFIG_PM +/* .suspend = fs_enet_suspend, TODO */ +/* .resume = fs_enet_resume, TODO */ +#endif +}; + +static struct device_driver fs_enet_scc_driver = { + .name = "fsl-cpm-scc", + .bus = &platform_bus_type, + .probe = fs_enet_probe, + .remove = fs_enet_remove, +#ifdef CONFIG_PM +/* .suspend = fs_enet_suspend, TODO */ +/* .resume = fs_enet_resume, TODO */ +#endif +}; + +static struct device_driver fs_enet_fcc_driver = { + .name = "fsl-cpm-fcc", + .bus = &platform_bus_type, + .probe = fs_enet_probe, + .remove = fs_enet_remove, +#ifdef CONFIG_PM +/* .suspend = fs_enet_suspend, TODO */ +/* .resume = fs_enet_resume, TODO */ +#endif +}; + +static int __init fs_init(void) +{ + int r; + + printk(KERN_INFO + "%s", version); + + r = setup_immap(); + if (r != 0) + return r; + r = driver_register(&fs_enet_fec_driver); + if (r != 0) + goto err; + + r = driver_register(&fs_enet_fcc_driver); + if (r != 0) + goto err; + + r = driver_register(&fs_enet_scc_driver); + if (r != 0) + goto err; + + return 0; +err: + cleanup_immap(); + return r; + +} + +static void __exit fs_cleanup(void) +{ + driver_unregister(&fs_enet_fec_driver); + driver_unregister(&fs_enet_fcc_driver); + driver_unregister(&fs_enet_scc_driver); + cleanup_immap(); +} + +/**************************************************************************************/ + +module_init(fs_init); +module_exit(fs_cleanup); diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c new file mode 100644 index 000000000000..c6770377ef87 --- /dev/null +++ b/drivers/net/fs_enet/fs_enet-mii.c @@ -0,0 +1,507 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * Heavily based on original FEC driver by Dan Malek + * and modifications by Joakim Tjernlund + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +/*************************************************/ + +/* + * Generic PHY support. + * Should work for all PHYs, but link change is detected by polling + */ + +static void generic_timer_callback(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct fs_enet_private *fep = netdev_priv(dev); + + fep->phy_timer_list.expires = jiffies + HZ / 2; + + add_timer(&fep->phy_timer_list); + + fs_mii_link_status_change_check(dev, 0); +} + +static void generic_startup(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */ + fep->phy_timer_list.data = (unsigned long)dev; + fep->phy_timer_list.function = generic_timer_callback; + add_timer(&fep->phy_timer_list); +} + +static void generic_shutdown(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + del_timer_sync(&fep->phy_timer_list); +} + +/* ------------------------------------------------------------------------- */ +/* The Davicom DM9161 is used on the NETTA board */ + +/* register definitions */ + +#define MII_DM9161_ANAR 4 /* Aux. Config Register */ +#define MII_DM9161_ACR 16 /* Aux. Config Register */ +#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */ +#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */ +#define MII_DM9161_INTR 21 /* Interrupt Register */ +#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */ +#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */ + +static void dm9161_startup(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000); + /* Start autonegotiation */ + fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200); + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HZ*8); +} + +static void dm9161_ack_int(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR); +} + +static void dm9161_shutdown(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00); +} + +/**********************************************************************************/ + +static const struct phy_info phy_info[] = { + { + .id = 0x00181b88, + .name = "DM9161", + .startup = dm9161_startup, + .ack_int = dm9161_ack_int, + .shutdown = dm9161_shutdown, + }, { + .id = 0, + .name = "GENERIC", + .startup = generic_startup, + .shutdown = generic_shutdown, + }, +}; + +/**********************************************************************************/ + +static int phy_id_detect(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + struct fs_enet_mii_bus *bus = fep->mii_bus; + int i, r, start, end, phytype, physubtype; + const struct phy_info *phy; + int phy_hwid, phy_id; + + phy_hwid = -1; + fep->phy = NULL; + + /* auto-detect? */ + if (fpi->phy_addr == -1) { + start = 1; + end = 32; + } else { /* direct */ + start = fpi->phy_addr; + end = start + 1; + } + + for (phy_id = start; phy_id < end; phy_id++) { + /* skip already used phy addresses on this bus */ + if (bus->usage_map & (1 << phy_id)) + continue; + r = fs_mii_read(dev, phy_id, MII_PHYSID1); + if (r == -1 || (phytype = (r & 0xffff)) == 0xffff) + continue; + r = fs_mii_read(dev, phy_id, MII_PHYSID2); + if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff) + continue; + phy_hwid = (phytype << 16) | physubtype; + if (phy_hwid != -1) + break; + } + + if (phy_hwid == -1) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s No PHY detected! range=0x%02x-0x%02x\n", + dev->name, start, end); + return -1; + } + + for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++) + if (phy->id == (phy_hwid >> 4) || phy->id == 0) + break; + + if (i >= ARRAY_SIZE(phy_info)) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s PHY id 0x%08x is not supported!\n", + dev->name, phy_hwid); + return -1; + } + + fep->phy = phy; + + /* mark this address as used */ + bus->usage_map |= (1 << phy_id); + + printk(KERN_INFO DRV_MODULE_NAME + ": %s Phy @ 0x%x, type %s (0x%08x)%s\n", + dev->name, phy_id, fep->phy->name, phy_hwid, + fpi->phy_addr == -1 ? " (auto-detected)" : ""); + + return phy_id; +} + +void fs_mii_startup(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->phy->startup) + (*fep->phy->startup) (dev); +} + +void fs_mii_shutdown(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->phy->shutdown) + (*fep->phy->shutdown) (dev); +} + +void fs_mii_ack_int(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->phy->ack_int) + (*fep->phy->ack_int) (dev); +} + +#define MII_LINK 0x0001 +#define MII_HALF 0x0002 +#define MII_FULL 0x0004 +#define MII_BASE4 0x0008 +#define MII_10M 0x0010 +#define MII_100M 0x0020 +#define MII_1G 0x0040 +#define MII_10G 0x0080 + +/* return full mii info at one gulp, with a usable form */ +static unsigned int mii_full_status(struct mii_if_info *mii) +{ + unsigned int status; + int bmsr, adv, lpa, neg; + struct fs_enet_private* fep = netdev_priv(mii->dev); + + /* first, a dummy read, needed to latch some MII phys */ + (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); + bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); + + /* no link */ + if ((bmsr & BMSR_LSTATUS) == 0) + return 0; + + status = MII_LINK; + + /* Lets look what ANEG says if it's supported - otherwize we shall + take the right values from the platform info*/ + if(!mii->force_media) { + /* autoneg not completed; don't bother */ + if ((bmsr & BMSR_ANEGCOMPLETE) == 0) + return 0; + + adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE); + lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA); + + neg = lpa & adv; + } else { + neg = fep->fpi->bus_info->lpa; + } + + if (neg & LPA_100FULL) + status |= MII_FULL | MII_100M; + else if (neg & LPA_100BASE4) + status |= MII_FULL | MII_BASE4 | MII_100M; + else if (neg & LPA_100HALF) + status |= MII_HALF | MII_100M; + else if (neg & LPA_10FULL) + status |= MII_FULL | MII_10M; + else + status |= MII_HALF | MII_10M; + + return status; +} + +void fs_mii_link_status_change_check(struct net_device *dev, int init_media) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct mii_if_info *mii = &fep->mii_if; + unsigned int mii_status; + int ok_to_print, link, duplex, speed; + unsigned long flags; + + ok_to_print = netif_msg_link(fep); + + mii_status = mii_full_status(mii); + + if (!init_media && mii_status == fep->last_mii_status) + return; + + fep->last_mii_status = mii_status; + + link = !!(mii_status & MII_LINK); + duplex = !!(mii_status & MII_FULL); + speed = (mii_status & MII_100M) ? 100 : 10; + + if (link == 0) { + netif_carrier_off(mii->dev); + netif_stop_queue(dev); + if (!init_media) { + spin_lock_irqsave(&fep->lock, flags); + (*fep->ops->stop)(dev); + spin_unlock_irqrestore(&fep->lock, flags); + } + + if (ok_to_print) + printk(KERN_INFO "%s: link down\n", mii->dev->name); + + } else { + + mii->full_duplex = duplex; + + netif_carrier_on(mii->dev); + + spin_lock_irqsave(&fep->lock, flags); + fep->duplex = duplex; + fep->speed = speed; + (*fep->ops->restart)(dev); + spin_unlock_irqrestore(&fep->lock, flags); + + netif_start_queue(dev); + + if (ok_to_print) + printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n", + dev->name, speed, duplex ? "full" : "half"); + } +} + +/**********************************************************************************/ + +int fs_mii_read(struct net_device *dev, int phy_id, int location) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_mii_bus *bus = fep->mii_bus; + + unsigned long flags; + int ret; + + spin_lock_irqsave(&bus->mii_lock, flags); + ret = (*bus->mii_read)(bus, phy_id, location); + spin_unlock_irqrestore(&bus->mii_lock, flags); + + return ret; +} + +void fs_mii_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_mii_bus *bus = fep->mii_bus; + unsigned long flags; + + spin_lock_irqsave(&bus->mii_lock, flags); + (*bus->mii_write)(bus, phy_id, location, value); + spin_unlock_irqrestore(&bus->mii_lock, flags); +} + +/*****************************************************************************/ + +/* list of all registered mii buses */ +static LIST_HEAD(fs_mii_bus_list); + +static struct fs_enet_mii_bus *lookup_bus(int method, int id) +{ + struct list_head *ptr; + struct fs_enet_mii_bus *bus; + + list_for_each(ptr, &fs_mii_bus_list) { + bus = list_entry(ptr, struct fs_enet_mii_bus, list); + if (bus->bus_info->method == method && + bus->bus_info->id == id) + return bus; + } + return NULL; +} + +static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi) +{ + struct fs_enet_mii_bus *bus; + int ret = 0; + + bus = kmalloc(sizeof(*bus), GFP_KERNEL); + if (bus == NULL) { + ret = -ENOMEM; + goto err; + } + memset(bus, 0, sizeof(*bus)); + spin_lock_init(&bus->mii_lock); + bus->bus_info = bi; + bus->refs = 0; + bus->usage_map = 0; + + /* perform initialization */ + switch (bi->method) { + + case fsmii_fixed: + ret = fs_mii_fixed_init(bus); + if (ret != 0) + goto err; + break; + + case fsmii_bitbang: + ret = fs_mii_bitbang_init(bus); + if (ret != 0) + goto err; + break; +#ifdef CONFIG_FS_ENET_HAS_FEC + case fsmii_fec: + ret = fs_mii_fec_init(bus); + if (ret != 0) + goto err; + break; +#endif + default: + ret = -EINVAL; + goto err; + } + + list_add(&bus->list, &fs_mii_bus_list); + + return bus; + +err: + if (bus) + kfree(bus); + return ERR_PTR(ret); +} + +static void destroy_bus(struct fs_enet_mii_bus *bus) +{ + /* remove from bus list */ + list_del(&bus->list); + + /* nothing more needed */ + kfree(bus); +} + +int fs_mii_connect(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + struct fs_enet_mii_bus *bus = NULL; + + /* check method validity */ + switch (fpi->bus_info->method) { + case fsmii_fixed: + case fsmii_bitbang: + break; +#ifdef CONFIG_FS_ENET_HAS_FEC + case fsmii_fec: + break; +#endif + default: + printk(KERN_ERR DRV_MODULE_NAME + ": %s Unknown MII bus method (%d)!\n", + dev->name, fpi->bus_info->method); + return -EINVAL; + } + + bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id); + + /* if not found create new bus */ + if (bus == NULL) { + bus = create_bus(fpi->bus_info); + if (IS_ERR(bus)) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s MII bus creation failure!\n", dev->name); + return PTR_ERR(bus); + } + } + + bus->refs++; + + fep->mii_bus = bus; + + fep->mii_if.dev = dev; + fep->mii_if.phy_id_mask = 0x1f; + fep->mii_if.reg_num_mask = 0x1f; + fep->mii_if.mdio_read = fs_mii_read; + fep->mii_if.mdio_write = fs_mii_write; + fep->mii_if.force_media = fpi->bus_info->disable_aneg; + fep->mii_if.phy_id = phy_id_detect(dev); + + return 0; +} + +void fs_mii_disconnect(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_mii_bus *bus = NULL; + + bus = fep->mii_bus; + fep->mii_bus = NULL; + + if (--bus->refs <= 0) + destroy_bus(bus); +} diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h new file mode 100644 index 000000000000..1105543b9d88 --- /dev/null +++ b/drivers/net/fs_enet/fs_enet.h @@ -0,0 +1,245 @@ +#ifndef FS_ENET_H +#define FS_ENET_H + +#include +#include +#include +#include +#include + +#include + +#include + +#ifdef CONFIG_CPM1 +#include +#endif + +#ifdef CONFIG_CPM2 +#include +#endif + +/* hw driver ops */ +struct fs_ops { + int (*setup_data)(struct net_device *dev); + int (*allocate_bd)(struct net_device *dev); + void (*free_bd)(struct net_device *dev); + void (*cleanup_data)(struct net_device *dev); + void (*set_multicast_list)(struct net_device *dev); + void (*restart)(struct net_device *dev); + void (*stop)(struct net_device *dev); + void (*pre_request_irq)(struct net_device *dev, int irq); + void (*post_free_irq)(struct net_device *dev, int irq); + void (*napi_clear_rx_event)(struct net_device *dev); + void (*napi_enable_rx)(struct net_device *dev); + void (*napi_disable_rx)(struct net_device *dev); + void (*rx_bd_done)(struct net_device *dev); + void (*tx_kickstart)(struct net_device *dev); + u32 (*get_int_events)(struct net_device *dev); + void (*clear_int_events)(struct net_device *dev, u32 int_events); + void (*ev_error)(struct net_device *dev, u32 int_events); + int (*get_regs)(struct net_device *dev, void *p, int *sizep); + int (*get_regs_len)(struct net_device *dev); + void (*tx_restart)(struct net_device *dev); +}; + +struct phy_info { + unsigned int id; + const char *name; + void (*startup) (struct net_device * dev); + void (*shutdown) (struct net_device * dev); + void (*ack_int) (struct net_device * dev); +}; + +/* The FEC stores dest/src/type, data, and checksum for receive packets. + */ +#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */ +#define MIN_MTU 46 /* this is data size */ +#define CRC_LEN 4 + +#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN) +#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN) + +/* Must be a multiple of 32 (to cover both FEC & FCC) */ +#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE + 31) & ~31) +/* This is needed so that invalidate_xxx wont invalidate too much */ +#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE) + +struct fs_enet_mii_bus { + struct list_head list; + spinlock_t mii_lock; + const struct fs_mii_bus_info *bus_info; + int refs; + u32 usage_map; + + int (*mii_read)(struct fs_enet_mii_bus *bus, + int phy_id, int location); + + void (*mii_write)(struct fs_enet_mii_bus *bus, + int phy_id, int location, int value); + + union { + struct { + unsigned int mii_speed; + void *fecp; + } fec; + + struct { + /* note that the actual port size may */ + /* be different; cpm(s) handle it OK */ + u8 mdio_msk; + u8 *mdio_dir; + u8 *mdio_dat; + u8 mdc_msk; + u8 *mdc_dir; + u8 *mdc_dat; + } bitbang; + + struct { + u16 lpa; + } fixed; + }; +}; + +int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus); +int fs_mii_fixed_init(struct fs_enet_mii_bus *bus); +int fs_mii_fec_init(struct fs_enet_mii_bus *bus); + +struct fs_enet_private { + struct device *dev; /* pointer back to the device (must be initialized first) */ + spinlock_t lock; /* during all ops except TX pckt processing */ + spinlock_t tx_lock; /* during fs_start_xmit and fs_tx */ + const struct fs_platform_info *fpi; + const struct fs_ops *ops; + int rx_ring, tx_ring; + dma_addr_t ring_mem_addr; + void *ring_base; + struct sk_buff **rx_skbuff; + struct sk_buff **tx_skbuff; + cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ + cbd_t *tx_bd_base; + cbd_t *dirty_tx; /* ring entries to be free()ed. */ + cbd_t *cur_rx; + cbd_t *cur_tx; + int tx_free; + struct net_device_stats stats; + struct timer_list phy_timer_list; + const struct phy_info *phy; + u32 msg_enable; + struct mii_if_info mii_if; + unsigned int last_mii_status; + struct fs_enet_mii_bus *mii_bus; + int interrupt; + + int duplex, speed; /* current settings */ + + /* event masks */ + u32 ev_napi_rx; /* mask of NAPI rx events */ + u32 ev_rx; /* rx event mask */ + u32 ev_tx; /* tx event mask */ + u32 ev_err; /* error event mask */ + + u16 bd_rx_empty; /* mask of BD rx empty */ + u16 bd_rx_err; /* mask of BD rx errors */ + + union { + struct { + int idx; /* FEC1 = 0, FEC2 = 1 */ + void *fecp; /* hw registers */ + u32 hthi, htlo; /* state for multicast */ + } fec; + + struct { + int idx; /* FCC1-3 = 0-2 */ + void *fccp; /* hw registers */ + void *ep; /* parameter ram */ + void *fcccp; /* hw registers cont. */ + void *mem; /* FCC DPRAM */ + u32 gaddrh, gaddrl; /* group address */ + } fcc; + + struct { + int idx; /* FEC1 = 0, FEC2 = 1 */ + void *sccp; /* hw registers */ + void *ep; /* parameter ram */ + u32 hthi, htlo; /* state for multicast */ + } scc; + + }; +}; + +/***************************************************************************/ + +int fs_mii_read(struct net_device *dev, int phy_id, int location); +void fs_mii_write(struct net_device *dev, int phy_id, int location, int value); + +void fs_mii_startup(struct net_device *dev); +void fs_mii_shutdown(struct net_device *dev); +void fs_mii_ack_int(struct net_device *dev); + +void fs_mii_link_status_change_check(struct net_device *dev, int init_media); + +void fs_init_bds(struct net_device *dev); +void fs_cleanup_bds(struct net_device *dev); + +/***************************************************************************/ + +#define DRV_MODULE_NAME "fs_enet" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Aug 8, 2005" + +/***************************************************************************/ + +int fs_enet_platform_init(void); +void fs_enet_platform_cleanup(void); + +/***************************************************************************/ + +/* buffer descriptor access macros */ + +/* access macros */ +#if defined(CONFIG_CPM1) +/* for a a CPM1 __raw_xxx's are sufficient */ +#define __cbd_out32(addr, x) __raw_writel(x, addr) +#define __cbd_out16(addr, x) __raw_writew(x, addr) +#define __cbd_in32(addr) __raw_readl(addr) +#define __cbd_in16(addr) __raw_readw(addr) +#else +/* for others play it safe */ +#define __cbd_out32(addr, x) out_be32(addr, x) +#define __cbd_out16(addr, x) out_be16(addr, x) +#define __cbd_in32(addr) in_be32(addr) +#define __cbd_in16(addr) in_be16(addr) +#endif + +/* write */ +#define CBDW_SC(_cbd, _sc) __cbd_out16(&(_cbd)->cbd_sc, (_sc)) +#define CBDW_DATLEN(_cbd, _datlen) __cbd_out16(&(_cbd)->cbd_datlen, (_datlen)) +#define CBDW_BUFADDR(_cbd, _bufaddr) __cbd_out32(&(_cbd)->cbd_bufaddr, (_bufaddr)) + +/* read */ +#define CBDR_SC(_cbd) __cbd_in16(&(_cbd)->cbd_sc) +#define CBDR_DATLEN(_cbd) __cbd_in16(&(_cbd)->cbd_datlen) +#define CBDR_BUFADDR(_cbd) __cbd_in32(&(_cbd)->cbd_bufaddr) + +/* set bits */ +#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc)) + +/* clear bits */ +#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc)) + +/*******************************************************************/ + +extern const struct fs_ops fs_fec_ops; +extern const struct fs_ops fs_fcc_ops; +extern const struct fs_ops fs_scc_ops; + +/*******************************************************************/ + +/* handy pointer to the immap */ +extern void *fs_enet_immap; + +/*******************************************************************/ + +#endif diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c new file mode 100644 index 000000000000..a940b96433c7 --- /dev/null +++ b/drivers/net/fs_enet/mac-fcc.c @@ -0,0 +1,578 @@ +/* + * FCC driver for Motorola MPC82xx (PQ2). + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +/*************************************************/ + +/* FCC access macros */ + +#define __fcc_out32(addr, x) out_be32((unsigned *)addr, x) +#define __fcc_out16(addr, x) out_be16((unsigned short *)addr, x) +#define __fcc_out8(addr, x) out_8((unsigned char *)addr, x) +#define __fcc_in32(addr) in_be32((unsigned *)addr) +#define __fcc_in16(addr) in_be16((unsigned short *)addr) +#define __fcc_in8(addr) in_8((unsigned char *)addr) + +/* parameter space */ + +/* write, read, set bits, clear bits */ +#define W32(_p, _m, _v) __fcc_out32(&(_p)->_m, (_v)) +#define R32(_p, _m) __fcc_in32(&(_p)->_m) +#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v)) +#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v)) + +#define W16(_p, _m, _v) __fcc_out16(&(_p)->_m, (_v)) +#define R16(_p, _m) __fcc_in16(&(_p)->_m) +#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v)) +#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v)) + +#define W8(_p, _m, _v) __fcc_out8(&(_p)->_m, (_v)) +#define R8(_p, _m) __fcc_in8(&(_p)->_m) +#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v)) +#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v)) + +/*************************************************/ + +#define FCC_MAX_MULTICAST_ADDRS 64 + +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) +#define mk_mii_end 0 + +#define MAX_CR_CMD_LOOPS 10000 + +static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 mcn, u32 op) +{ + const struct fs_platform_info *fpi = fep->fpi; + + cpm2_map_t *immap = fs_enet_immap; + cpm_cpm2_t *cpmp = &immap->im_cpm; + u32 v; + int i; + + /* Currently I don't know what feature call will look like. But + I guess there'd be something like do_cpm_cmd() which will require page & sblock */ + v = mk_cr_cmd(fpi->cp_page, fpi->cp_block, mcn, op); + W32(cpmp, cp_cpcr, v | CPM_CR_FLG); + for (i = 0; i < MAX_CR_CMD_LOOPS; i++) + if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0) + break; + + if (i >= MAX_CR_CMD_LOOPS) { + printk(KERN_ERR "%s(): Not able to issue CPM command\n", + __FUNCTION__); + return 1; + } + + return 0; +} + +static int do_pd_setup(struct fs_enet_private *fep) +{ + struct platform_device *pdev = to_platform_device(fep->dev); + struct resource *r; + + /* Fill out IRQ field */ + fep->interrupt = platform_get_irq(pdev, 0); + + /* Attach the memory for the FCC Parameter RAM */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram"); + fep->fcc.ep = (void *)r->start; + + if (fep->fcc.ep == NULL) + return -EINVAL; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs"); + fep->fcc.fccp = (void *)r->start; + + if (fep->fcc.fccp == NULL) + return -EINVAL; + + fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c; + + if (fep->fcc.fcccp == NULL) + return -EINVAL; + + return 0; +} + +#define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB) +#define FCC_RX_EVENT (FCC_ENET_RXF) +#define FCC_TX_EVENT (FCC_ENET_TXB) +#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY) + +static int setup_data(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->fcc.idx = fs_get_fcc_index(fpi->fs_no); + if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */ + return -EINVAL; + + fep->fcc.mem = (void *)fpi->mem_offset; + + if (do_pd_setup(fep) != 0) + return -EINVAL; + + fep->ev_napi_rx = FCC_NAPI_RX_EVENT_MSK; + fep->ev_rx = FCC_RX_EVENT; + fep->ev_tx = FCC_TX_EVENT; + fep->ev_err = FCC_ERR_EVENT_MSK; + + return 0; +} + +static int allocate_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->ring_base = dma_alloc_coherent(fep->dev, + (fpi->tx_ring + fpi->rx_ring) * + sizeof(cbd_t), &fep->ring_mem_addr, + GFP_KERNEL); + if (fep->ring_base == NULL) + return -ENOMEM; + + return 0; +} + +static void free_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + if (fep->ring_base) + dma_free_coherent(fep->dev, + (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), + fep->ring_base, fep->ring_mem_addr); +} + +static void cleanup_data(struct net_device *dev) +{ + /* nothing */ +} + +static void set_promiscuous_mode(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + S32(fccp, fcc_fpsmr, FCC_PSMR_PRO); +} + +static void set_multicast_start(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_enet_t *ep = fep->fcc.ep; + + W32(ep, fen_gaddrh, 0); + W32(ep, fen_gaddrl, 0); +} + +static void set_multicast_one(struct net_device *dev, const u8 *mac) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_enet_t *ep = fep->fcc.ep; + u16 taddrh, taddrm, taddrl; + + taddrh = ((u16)mac[5] << 8) | mac[4]; + taddrm = ((u16)mac[3] << 8) | mac[2]; + taddrl = ((u16)mac[1] << 8) | mac[0]; + + W16(ep, fen_taddrh, taddrh); + W16(ep, fen_taddrm, taddrm); + W16(ep, fen_taddrl, taddrl); + fcc_cr_cmd(fep, 0x0C, CPM_CR_SET_GADDR); +} + +static void set_multicast_finish(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + fcc_enet_t *ep = fep->fcc.ep; + + /* clear promiscuous always */ + C32(fccp, fcc_fpsmr, FCC_PSMR_PRO); + + /* if all multi or too many multicasts; just enable all */ + if ((dev->flags & IFF_ALLMULTI) != 0 || + dev->mc_count > FCC_MAX_MULTICAST_ADDRS) { + + W32(ep, fen_gaddrh, 0xffffffff); + W32(ep, fen_gaddrl, 0xffffffff); + } + + /* read back */ + fep->fcc.gaddrh = R32(ep, fen_gaddrh); + fep->fcc.gaddrl = R32(ep, fen_gaddrl); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *pmc; + + if ((dev->flags & IFF_PROMISC) == 0) { + set_multicast_start(dev); + for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) + set_multicast_one(dev, pmc->dmi_addr); + set_multicast_finish(dev); + } else + set_promiscuous_mode(dev); +} + +static void restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + fcc_t *fccp = fep->fcc.fccp; + fcc_c_t *fcccp = fep->fcc.fcccp; + fcc_enet_t *ep = fep->fcc.ep; + dma_addr_t rx_bd_base_phys, tx_bd_base_phys; + u16 paddrh, paddrm, paddrl; + u16 mem_addr; + const unsigned char *mac; + int i; + + C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); + + /* clear everything (slow & steady does it) */ + for (i = 0; i < sizeof(*ep); i++) + __fcc_out8((char *)ep + i, 0); + + /* get physical address */ + rx_bd_base_phys = fep->ring_mem_addr; + tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring; + + /* point to bds */ + W32(ep, fen_genfcc.fcc_rbase, rx_bd_base_phys); + W32(ep, fen_genfcc.fcc_tbase, tx_bd_base_phys); + + /* Set maximum bytes per receive buffer. + * It must be a multiple of 32. + */ + W16(ep, fen_genfcc.fcc_mrblr, PKT_MAXBLR_SIZE); + + W32(ep, fen_genfcc.fcc_rstate, (CPMFCR_GBL | CPMFCR_EB) << 24); + W32(ep, fen_genfcc.fcc_tstate, (CPMFCR_GBL | CPMFCR_EB) << 24); + + /* Allocate space in the reserved FCC area of DPRAM for the + * internal buffers. No one uses this space (yet), so we + * can do this. Later, we will add resource management for + * this area. + */ + + mem_addr = (u32) fep->fcc.mem; /* de-fixup dpram offset */ + + W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff)); + W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff)); + W16(ep, fen_padptr, mem_addr + 64); + + /* fill with special symbol... */ + memset(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32); + + W32(ep, fen_genfcc.fcc_rbptr, 0); + W32(ep, fen_genfcc.fcc_tbptr, 0); + W32(ep, fen_genfcc.fcc_rcrc, 0); + W32(ep, fen_genfcc.fcc_tcrc, 0); + W16(ep, fen_genfcc.fcc_res1, 0); + W32(ep, fen_genfcc.fcc_res2, 0); + + /* no CAM */ + W32(ep, fen_camptr, 0); + + /* Set CRC preset and mask */ + W32(ep, fen_cmask, 0xdebb20e3); + W32(ep, fen_cpres, 0xffffffff); + + W32(ep, fen_crcec, 0); /* CRC Error counter */ + W32(ep, fen_alec, 0); /* alignment error counter */ + W32(ep, fen_disfc, 0); /* discard frame counter */ + W16(ep, fen_retlim, 15); /* Retry limit threshold */ + W16(ep, fen_pper, 0); /* Normal persistence */ + + /* set group address */ + W32(ep, fen_gaddrh, fep->fcc.gaddrh); + W32(ep, fen_gaddrl, fep->fcc.gaddrh); + + /* Clear hash filter tables */ + W32(ep, fen_iaddrh, 0); + W32(ep, fen_iaddrl, 0); + + /* Clear the Out-of-sequence TxBD */ + W16(ep, fen_tfcstat, 0); + W16(ep, fen_tfclen, 0); + W32(ep, fen_tfcptr, 0); + + W16(ep, fen_mflr, PKT_MAXBUF_SIZE); /* maximum frame length register */ + W16(ep, fen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */ + + /* set address */ + mac = dev->dev_addr; + paddrh = ((u16)mac[5] << 8) | mac[4]; + paddrm = ((u16)mac[3] << 8) | mac[2]; + paddrl = ((u16)mac[1] << 8) | mac[0]; + + W16(ep, fen_paddrh, paddrh); + W16(ep, fen_paddrm, paddrm); + W16(ep, fen_paddrl, paddrl); + + W16(ep, fen_taddrh, 0); + W16(ep, fen_taddrm, 0); + W16(ep, fen_taddrl, 0); + + W16(ep, fen_maxd1, 1520); /* maximum DMA1 length */ + W16(ep, fen_maxd2, 1520); /* maximum DMA2 length */ + + /* Clear stat counters, in case we ever enable RMON */ + W32(ep, fen_octc, 0); + W32(ep, fen_colc, 0); + W32(ep, fen_broc, 0); + W32(ep, fen_mulc, 0); + W32(ep, fen_uspc, 0); + W32(ep, fen_frgc, 0); + W32(ep, fen_ospc, 0); + W32(ep, fen_jbrc, 0); + W32(ep, fen_p64c, 0); + W32(ep, fen_p65c, 0); + W32(ep, fen_p128c, 0); + W32(ep, fen_p256c, 0); + W32(ep, fen_p512c, 0); + W32(ep, fen_p1024c, 0); + + W16(ep, fen_rfthr, 0); /* Suggested by manual */ + W16(ep, fen_rfcnt, 0); + W16(ep, fen_cftype, 0); + + fs_init_bds(dev); + + /* adjust to speed (for RMII mode) */ + if (fpi->use_rmii) { + if (fep->speed == 100) + C8(fcccp, fcc_gfemr, 0x20); + else + S8(fcccp, fcc_gfemr, 0x20); + } + + fcc_cr_cmd(fep, 0x0c, CPM_CR_INIT_TRX); + + /* clear events */ + W16(fccp, fcc_fcce, 0xffff); + + /* Enable interrupts we wish to service */ + W16(fccp, fcc_fccm, FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB); + + /* Set GFMR to enable Ethernet operating mode */ + W32(fccp, fcc_gfmr, FCC_GFMR_TCI | FCC_GFMR_MODE_ENET); + + /* set sync/delimiters */ + W16(fccp, fcc_fdsr, 0xd555); + + W32(fccp, fcc_fpsmr, FCC_PSMR_ENCRC); + + if (fpi->use_rmii) + S32(fccp, fcc_fpsmr, FCC_PSMR_RMII); + + /* adjust to duplex mode */ + if (fep->duplex) + S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); + else + C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); + + S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); +} + +static void stop(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + /* stop ethernet */ + C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); + + /* clear events */ + W16(fccp, fcc_fcce, 0xffff); + + /* clear interrupt mask */ + W16(fccp, fcc_fccm, 0); + + fs_cleanup_bds(dev); +} + +static void pre_request_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void post_free_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void napi_clear_rx_event(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + W16(fccp, fcc_fcce, FCC_NAPI_RX_EVENT_MSK); +} + +static void napi_enable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + S16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK); +} + +static void napi_disable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + C16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK); +} + +static void rx_bd_done(struct net_device *dev) +{ + /* nothing */ +} + +static void tx_kickstart(struct net_device *dev) +{ + /* nothing */ +} + +static u32 get_int_events(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + return (u32)R16(fccp, fcc_fcce); +} + +static void clear_int_events(struct net_device *dev, u32 int_events) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + W16(fccp, fcc_fcce, int_events & 0xffff); +} + +static void ev_error(struct net_device *dev, u32 int_events) +{ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s FS_ENET ERROR(s) 0x%x\n", dev->name, int_events); +} + +int get_regs(struct net_device *dev, void *p, int *sizep) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (*sizep < sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t)) + return -EINVAL; + + memcpy_fromio(p, fep->fcc.fccp, sizeof(fcc_t)); + p = (char *)p + sizeof(fcc_t); + + memcpy_fromio(p, fep->fcc.fcccp, sizeof(fcc_c_t)); + p = (char *)p + sizeof(fcc_c_t); + + memcpy_fromio(p, fep->fcc.ep, sizeof(fcc_enet_t)); + + return 0; +} + +int get_regs_len(struct net_device *dev) +{ + return sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t); +} + +/* Some transmit errors cause the transmitter to shut + * down. We now issue a restart transmit. Since the + * errors close the BD and update the pointers, the restart + * _should_ pick up without having to reset any of our + * pointers either. Also, To workaround 8260 device erratum + * CPM37, we must disable and then re-enable the transmitter + * following a Late Collision, Underrun, or Retry Limit error. + */ +void tx_restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + C32(fccp, fcc_gfmr, FCC_GFMR_ENT); + udelay(10); + S32(fccp, fcc_gfmr, FCC_GFMR_ENT); + + fcc_cr_cmd(fep, 0x0C, CPM_CR_RESTART_TX); +} + +/*************************************************************************/ + +const struct fs_ops fs_fcc_ops = { + .setup_data = setup_data, + .cleanup_data = cleanup_data, + .set_multicast_list = set_multicast_list, + .restart = restart, + .stop = stop, + .pre_request_irq = pre_request_irq, + .post_free_irq = post_free_irq, + .napi_clear_rx_event = napi_clear_rx_event, + .napi_enable_rx = napi_enable_rx, + .napi_disable_rx = napi_disable_rx, + .rx_bd_done = rx_bd_done, + .tx_kickstart = tx_kickstart, + .get_int_events = get_int_events, + .clear_int_events = clear_int_events, + .ev_error = ev_error, + .get_regs = get_regs, + .get_regs_len = get_regs_len, + .tx_restart = tx_restart, + .allocate_bd = allocate_bd, + .free_bd = free_bd, +}; diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c new file mode 100644 index 000000000000..5ef4e845a387 --- /dev/null +++ b/drivers/net/fs_enet/mac-fec.c @@ -0,0 +1,653 @@ +/* + * Freescale Ethernet controllers + * + * Copyright (c) 2005 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_8xx +#include +#include +#include +#include +#endif + +#include "fs_enet.h" + +/*************************************************/ + +#if defined(CONFIG_CPM1) +/* for a CPM1 __raw_xxx's are sufficient */ +#define __fs_out32(addr, x) __raw_writel(x, addr) +#define __fs_out16(addr, x) __raw_writew(x, addr) +#define __fs_in32(addr) __raw_readl(addr) +#define __fs_in16(addr) __raw_readw(addr) +#else +/* for others play it safe */ +#define __fs_out32(addr, x) out_be32(addr, x) +#define __fs_out16(addr, x) out_be16(addr, x) +#define __fs_in32(addr) in_be32(addr) +#define __fs_in16(addr) in_be16(addr) +#endif + +/* write */ +#define FW(_fecp, _reg, _v) __fs_out32(&(_fecp)->fec_ ## _reg, (_v)) + +/* read */ +#define FR(_fecp, _reg) __fs_in32(&(_fecp)->fec_ ## _reg) + +/* set bits */ +#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v)) + +/* clear bits */ +#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v)) + + +/* CRC polynomium used by the FEC for the multicast group filtering */ +#define FEC_CRC_POLY 0x04C11DB7 + +#define FEC_MAX_MULTICAST_ADDRS 64 + +/* Interrupt events/masks. +*/ +#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ +#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ +#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ +#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ +#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ +#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ +#define FEC_ENET_RXF 0x02000000U /* Full frame received */ +#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ +#define FEC_ENET_MII 0x00800000U /* MII interrupt */ +#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ + +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_ECNTRL_ETHER_EN 0x00000002 +#define FEC_ECNTRL_RESET 0x00000001 + +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_LOOP 0x00000001 + +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_GTS 0x00000001 + + +/* Make MII read/write commands for the FEC. +*/ +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) +#define mk_mii_end 0 + +#define FEC_MII_LOOPS 10000 + +/* + * Delay to wait for FEC reset command to complete (in us) + */ +#define FEC_RESET_DELAY 50 + +static int whack_reset(fec_t * fecp) +{ + int i; + + FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET); + for (i = 0; i < FEC_RESET_DELAY; i++) { + if ((FR(fecp, ecntrl) & FEC_ECNTRL_RESET) == 0) + return 0; /* OK */ + udelay(1); + } + + return -1; +} + +static int do_pd_setup(struct fs_enet_private *fep) +{ + struct platform_device *pdev = to_platform_device(fep->dev); + struct resource *r; + + /* Fill out IRQ field */ + fep->interrupt = platform_get_irq_byname(pdev,"interrupt"); + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + fep->fec.fecp =(void*)r->start; + + if(fep->fec.fecp == NULL) + return -EINVAL; + + return 0; + +} + +#define FEC_NAPI_RX_EVENT_MSK (FEC_ENET_RXF | FEC_ENET_RXB) +#define FEC_RX_EVENT (FEC_ENET_RXF) +#define FEC_TX_EVENT (FEC_ENET_TXF) +#define FEC_ERR_EVENT_MSK (FEC_ENET_HBERR | FEC_ENET_BABR | \ + FEC_ENET_BABT | FEC_ENET_EBERR) + +static int setup_data(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (do_pd_setup(fep) != 0) + return -EINVAL; + + fep->fec.hthi = 0; + fep->fec.htlo = 0; + + fep->ev_napi_rx = FEC_NAPI_RX_EVENT_MSK; + fep->ev_rx = FEC_RX_EVENT; + fep->ev_tx = FEC_TX_EVENT; + fep->ev_err = FEC_ERR_EVENT_MSK; + + return 0; +} + +static int allocate_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->ring_base = dma_alloc_coherent(fep->dev, + (fpi->tx_ring + fpi->rx_ring) * + sizeof(cbd_t), &fep->ring_mem_addr, + GFP_KERNEL); + if (fep->ring_base == NULL) + return -ENOMEM; + + return 0; +} + +static void free_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + if(fep->ring_base) + dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) + * sizeof(cbd_t), + fep->ring_base, + fep->ring_mem_addr); +} + +static void cleanup_data(struct net_device *dev) +{ + /* nothing */ +} + +static void set_promiscuous_mode(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FS(fecp, r_cntrl, FEC_RCNTRL_PROM); +} + +static void set_multicast_start(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fep->fec.hthi = 0; + fep->fec.htlo = 0; +} + +static void set_multicast_one(struct net_device *dev, const u8 *mac) +{ + struct fs_enet_private *fep = netdev_priv(dev); + int temp, hash_index, i, j; + u32 crc, csrVal; + u8 byte, msb; + + crc = 0xffffffff; + for (i = 0; i < 6; i++) { + byte = mac[i]; + for (j = 0; j < 8; j++) { + msb = crc >> 31; + crc <<= 1; + if (msb ^ (byte & 0x1)) + crc ^= FEC_CRC_POLY; + byte >>= 1; + } + } + + temp = (crc & 0x3f) >> 1; + hash_index = ((temp & 0x01) << 4) | + ((temp & 0x02) << 2) | + ((temp & 0x04)) | + ((temp & 0x08) >> 2) | + ((temp & 0x10) >> 4); + csrVal = 1 << hash_index; + if (crc & 1) + fep->fec.hthi |= csrVal; + else + fep->fec.htlo |= csrVal; +} + +static void set_multicast_finish(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + /* if all multi or too many multicasts; just enable all */ + if ((dev->flags & IFF_ALLMULTI) != 0 || + dev->mc_count > FEC_MAX_MULTICAST_ADDRS) { + fep->fec.hthi = 0xffffffffU; + fep->fec.htlo = 0xffffffffU; + } + + FC(fecp, r_cntrl, FEC_RCNTRL_PROM); + FW(fecp, hash_table_high, fep->fec.hthi); + FW(fecp, hash_table_low, fep->fec.htlo); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *pmc; + + if ((dev->flags & IFF_PROMISC) == 0) { + set_multicast_start(dev); + for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) + set_multicast_one(dev, pmc->dmi_addr); + set_multicast_finish(dev); + } else + set_promiscuous_mode(dev); +} + +static void restart(struct net_device *dev) +{ +#ifdef CONFIG_DUET + immap_t *immap = fs_enet_immap; + u32 cptr; +#endif + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + const struct fs_platform_info *fpi = fep->fpi; + dma_addr_t rx_bd_base_phys, tx_bd_base_phys; + int r; + u32 addrhi, addrlo; + + r = whack_reset(fep->fec.fecp); + if (r != 0) + printk(KERN_ERR DRV_MODULE_NAME + ": %s FEC Reset FAILED!\n", dev->name); + + /* + * Set station address. + */ + addrhi = ((u32) dev->dev_addr[0] << 24) | + ((u32) dev->dev_addr[1] << 16) | + ((u32) dev->dev_addr[2] << 8) | + (u32) dev->dev_addr[3]; + addrlo = ((u32) dev->dev_addr[4] << 24) | + ((u32) dev->dev_addr[5] << 16); + FW(fecp, addr_low, addrhi); + FW(fecp, addr_high, addrlo); + + /* + * Reset all multicast. + */ + FW(fecp, hash_table_high, fep->fec.hthi); + FW(fecp, hash_table_low, fep->fec.htlo); + + /* + * Set maximum receive buffer size. + */ + FW(fecp, r_buff_size, PKT_MAXBLR_SIZE); + FW(fecp, r_hash, PKT_MAXBUF_SIZE); + + /* get physical address */ + rx_bd_base_phys = fep->ring_mem_addr; + tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring; + + /* + * Set receive and transmit descriptor base. + */ + FW(fecp, r_des_start, rx_bd_base_phys); + FW(fecp, x_des_start, tx_bd_base_phys); + + fs_init_bds(dev); + + /* + * Enable big endian and don't care about SDMA FC. + */ + FW(fecp, fun_code, 0x78000000); + + /* + * Set MII speed. + */ + FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed); + + /* + * Clear any outstanding interrupt. + */ + FW(fecp, ievent, 0xffc0); + FW(fecp, ivec, (fep->interrupt / 2) << 29); + + + /* + * adjust to speed (only for DUET & RMII) + */ +#ifdef CONFIG_DUET + if (fpi->use_rmii) { + cptr = in_be32(&immap->im_cpm.cp_cptr); + switch (fs_get_fec_index(fpi->fs_no)) { + case 0: + cptr |= 0x100; + if (fep->speed == 10) + cptr |= 0x0000010; + else if (fep->speed == 100) + cptr &= ~0x0000010; + break; + case 1: + cptr |= 0x80; + if (fep->speed == 10) + cptr |= 0x0000008; + else if (fep->speed == 100) + cptr &= ~0x0000008; + break; + default: + BUG(); /* should never happen */ + break; + } + out_be32(&immap->im_cpm.cp_cptr, cptr); + } +#endif + + FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + /* + * adjust to duplex mode + */ + if (fep->duplex) { + FC(fecp, r_cntrl, FEC_RCNTRL_DRT); + FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */ + } else { + FS(fecp, r_cntrl, FEC_RCNTRL_DRT); + FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */ + } + + /* + * Enable interrupts we wish to service. + */ + FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB | + FEC_ENET_RXF | FEC_ENET_RXB); + + /* + * And last, enable the transmit and receive processing. + */ + FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + FW(fecp, r_des_active, 0x01000000); +} + +static void stop(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + struct fs_enet_mii_bus *bus = fep->mii_bus; + const struct fs_mii_bus_info *bi = bus->bus_info; + int i; + + if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0) + return; /* already down */ + + FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */ + for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) && + i < FEC_RESET_DELAY; i++) + udelay(1); + + if (i == FEC_RESET_DELAY) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s FEC timeout on graceful transmit stop\n", + dev->name); + /* + * Disable FEC. Let only MII interrupts. + */ + FW(fecp, imask, 0); + FC(fecp, ecntrl, FEC_ECNTRL_ETHER_EN); + + fs_cleanup_bds(dev); + + /* shut down FEC1? that's where the mii bus is */ + if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) { + FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + FW(fecp, ievent, FEC_ENET_MII); + FW(fecp, mii_speed, bus->fec.mii_speed); + } +} + +static void pre_request_irq(struct net_device *dev, int irq) +{ + immap_t *immap = fs_enet_immap; + u32 siel; + + /* SIU interrupt */ + if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) { + + siel = in_be32(&immap->im_siu_conf.sc_siel); + if ((irq & 1) == 0) + siel |= (0x80000000 >> irq); + else + siel &= ~(0x80000000 >> (irq & ~1)); + out_be32(&immap->im_siu_conf.sc_siel, siel); + } +} + +static void post_free_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void napi_clear_rx_event(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, ievent, FEC_NAPI_RX_EVENT_MSK); +} + +static void napi_enable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FS(fecp, imask, FEC_NAPI_RX_EVENT_MSK); +} + +static void napi_disable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FC(fecp, imask, FEC_NAPI_RX_EVENT_MSK); +} + +static void rx_bd_done(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, r_des_active, 0x01000000); +} + +static void tx_kickstart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, x_des_active, 0x01000000); +} + +static u32 get_int_events(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + return FR(fecp, ievent) & FR(fecp, imask); +} + +static void clear_int_events(struct net_device *dev, u32 int_events) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, ievent, int_events); +} + +static void ev_error(struct net_device *dev, u32 int_events) +{ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s FEC ERROR(s) 0x%x\n", dev->name, int_events); +} + +int get_regs(struct net_device *dev, void *p, int *sizep) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (*sizep < sizeof(fec_t)) + return -EINVAL; + + memcpy_fromio(p, fep->fec.fecp, sizeof(fec_t)); + + return 0; +} + +int get_regs_len(struct net_device *dev) +{ + return sizeof(fec_t); +} + +void tx_restart(struct net_device *dev) +{ + /* nothing */ +} + +/*************************************************************************/ + +const struct fs_ops fs_fec_ops = { + .setup_data = setup_data, + .cleanup_data = cleanup_data, + .set_multicast_list = set_multicast_list, + .restart = restart, + .stop = stop, + .pre_request_irq = pre_request_irq, + .post_free_irq = post_free_irq, + .napi_clear_rx_event = napi_clear_rx_event, + .napi_enable_rx = napi_enable_rx, + .napi_disable_rx = napi_disable_rx, + .rx_bd_done = rx_bd_done, + .tx_kickstart = tx_kickstart, + .get_int_events = get_int_events, + .clear_int_events = clear_int_events, + .ev_error = ev_error, + .get_regs = get_regs, + .get_regs_len = get_regs_len, + .tx_restart = tx_restart, + .allocate_bd = allocate_bd, + .free_bd = free_bd, +}; + +/***********************************************************************/ + +static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +{ + fec_t *fecp = bus->fec.fecp; + int i, ret = -1; + + if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) { + FW(fecp, ievent, FEC_ENET_MII); + ret = FR(fecp, mii_data) & 0xffff; + } + + return ret; +} + +static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value) +{ + fec_t *fecp = bus->fec.fecp; + int i; + + /* this must never happen */ + if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) + FW(fecp, ievent, FEC_ENET_MII); +} + +int fs_mii_fec_init(struct fs_enet_mii_bus *bus) +{ + bd_t *bd = (bd_t *)__res; + const struct fs_mii_bus_info *bi = bus->bus_info; + fec_t *fecp; + + if (bi->id != 0) + return -1; + + bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec; + bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) + & 0x3F) << 1; + + fecp = bus->fec.fecp; + + FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + FW(fecp, ievent, FEC_ENET_MII); + FW(fecp, mii_speed, bus->fec.mii_speed); + + bus->mii_read = mii_read; + bus->mii_write = mii_write; + + return 0; +} diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c new file mode 100644 index 000000000000..d8c6e9cadcf5 --- /dev/null +++ b/drivers/net/fs_enet/mac-scc.c @@ -0,0 +1,524 @@ +/* + * Ethernet on Serial Communications Controller (SCC) driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_8xx +#include +#include +#include +#include +#endif + +#include "fs_enet.h" + +/*************************************************/ + +#if defined(CONFIG_CPM1) +/* for a 8xx __raw_xxx's are sufficient */ +#define __fs_out32(addr, x) __raw_writel(x, addr) +#define __fs_out16(addr, x) __raw_writew(x, addr) +#define __fs_out8(addr, x) __raw_writeb(x, addr) +#define __fs_in32(addr) __raw_readl(addr) +#define __fs_in16(addr) __raw_readw(addr) +#define __fs_in8(addr) __raw_readb(addr) +#else +/* for others play it safe */ +#define __fs_out32(addr, x) out_be32(addr, x) +#define __fs_out16(addr, x) out_be16(addr, x) +#define __fs_in32(addr) in_be32(addr) +#define __fs_in16(addr) in_be16(addr) +#endif + +/* write, read, set bits, clear bits */ +#define W32(_p, _m, _v) __fs_out32(&(_p)->_m, (_v)) +#define R32(_p, _m) __fs_in32(&(_p)->_m) +#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v)) +#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v)) + +#define W16(_p, _m, _v) __fs_out16(&(_p)->_m, (_v)) +#define R16(_p, _m) __fs_in16(&(_p)->_m) +#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v)) +#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v)) + +#define W8(_p, _m, _v) __fs_out8(&(_p)->_m, (_v)) +#define R8(_p, _m) __fs_in8(&(_p)->_m) +#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v)) +#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v)) + +#define SCC_MAX_MULTICAST_ADDRS 64 + +/* + * Delay to wait for SCC reset command to complete (in us) + */ +#define SCC_RESET_DELAY 50 +#define MAX_CR_CMD_LOOPS 10000 + +static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op) +{ + cpm8xx_t *cpmp = &((immap_t *)fs_enet_immap)->im_cpm; + u32 v, ch; + int i = 0; + + ch = fep->scc.idx << 2; + v = mk_cr_cmd(ch, op); + W16(cpmp, cp_cpcr, v | CPM_CR_FLG); + for (i = 0; i < MAX_CR_CMD_LOOPS; i++) + if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0) + break; + + if (i >= MAX_CR_CMD_LOOPS) { + printk(KERN_ERR "%s(): Not able to issue CPM command\n", + __FUNCTION__); + return 1; + } + return 0; +} + +static int do_pd_setup(struct fs_enet_private *fep) +{ + struct platform_device *pdev = to_platform_device(fep->dev); + struct resource *r; + + /* Fill out IRQ field */ + fep->interrupt = platform_get_irq_byname(pdev, "interrupt"); + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + fep->scc.sccp = (void *)r->start; + + if (fep->scc.sccp == NULL) + return -EINVAL; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram"); + fep->scc.ep = (void *)r->start; + + if (fep->scc.ep == NULL) + return -EINVAL; + + return 0; +} + +#define SCC_NAPI_RX_EVENT_MSK (SCCE_ENET_RXF | SCCE_ENET_RXB) +#define SCC_RX_EVENT (SCCE_ENET_RXF) +#define SCC_TX_EVENT (SCCE_ENET_TXB) +#define SCC_ERR_EVENT_MSK (SCCE_ENET_TXE | SCCE_ENET_BSY) + +static int setup_data(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->scc.idx = fs_get_scc_index(fpi->fs_no); + if ((unsigned int)fep->fcc.idx > 4) /* max 4 SCCs */ + return -EINVAL; + + do_pd_setup(fep); + + fep->scc.hthi = 0; + fep->scc.htlo = 0; + + fep->ev_napi_rx = SCC_NAPI_RX_EVENT_MSK; + fep->ev_rx = SCC_RX_EVENT; + fep->ev_tx = SCC_TX_EVENT; + fep->ev_err = SCC_ERR_EVENT_MSK; + + return 0; +} + +static int allocate_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->ring_mem_addr = cpm_dpalloc((fpi->tx_ring + fpi->rx_ring) * + sizeof(cbd_t), 8); + if (IS_DPERR(fep->ring_mem_addr)) + return -ENOMEM; + + fep->ring_base = cpm_dpram_addr(fep->ring_mem_addr); + + return 0; +} + +static void free_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->ring_base) + cpm_dpfree(fep->ring_mem_addr); +} + +static void cleanup_data(struct net_device *dev) +{ + /* nothing */ +} + +static void set_promiscuous_mode(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + S16(sccp, scc_psmr, SCC_PSMR_PRO); +} + +static void set_multicast_start(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_enet_t *ep = fep->scc.ep; + + W16(ep, sen_gaddr1, 0); + W16(ep, sen_gaddr2, 0); + W16(ep, sen_gaddr3, 0); + W16(ep, sen_gaddr4, 0); +} + +static void set_multicast_one(struct net_device *dev, const u8 * mac) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_enet_t *ep = fep->scc.ep; + u16 taddrh, taddrm, taddrl; + + taddrh = ((u16) mac[5] << 8) | mac[4]; + taddrm = ((u16) mac[3] << 8) | mac[2]; + taddrl = ((u16) mac[1] << 8) | mac[0]; + + W16(ep, sen_taddrh, taddrh); + W16(ep, sen_taddrm, taddrm); + W16(ep, sen_taddrl, taddrl); + scc_cr_cmd(fep, CPM_CR_SET_GADDR); +} + +static void set_multicast_finish(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + scc_enet_t *ep = fep->scc.ep; + + /* clear promiscuous always */ + C16(sccp, scc_psmr, SCC_PSMR_PRO); + + /* if all multi or too many multicasts; just enable all */ + if ((dev->flags & IFF_ALLMULTI) != 0 || + dev->mc_count > SCC_MAX_MULTICAST_ADDRS) { + + W16(ep, sen_gaddr1, 0xffff); + W16(ep, sen_gaddr2, 0xffff); + W16(ep, sen_gaddr3, 0xffff); + W16(ep, sen_gaddr4, 0xffff); + } +} + +static void set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *pmc; + + if ((dev->flags & IFF_PROMISC) == 0) { + set_multicast_start(dev); + for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) + set_multicast_one(dev, pmc->dmi_addr); + set_multicast_finish(dev); + } else + set_promiscuous_mode(dev); +} + +/* + * This function is called to start or restart the FEC during a link + * change. This only happens when switching between half and full + * duplex. + */ +static void restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + scc_enet_t *ep = fep->scc.ep; + const struct fs_platform_info *fpi = fep->fpi; + u16 paddrh, paddrm, paddrl; + const unsigned char *mac; + int i; + + C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + /* clear everything (slow & steady does it) */ + for (i = 0; i < sizeof(*ep); i++) + __fs_out8((char *)ep + i, 0); + + /* point to bds */ + W16(ep, sen_genscc.scc_rbase, fep->ring_mem_addr); + W16(ep, sen_genscc.scc_tbase, + fep->ring_mem_addr + sizeof(cbd_t) * fpi->rx_ring); + + /* Initialize function code registers for big-endian. + */ + W8(ep, sen_genscc.scc_rfcr, SCC_EB); + W8(ep, sen_genscc.scc_tfcr, SCC_EB); + + /* Set maximum bytes per receive buffer. + * This appears to be an Ethernet frame size, not the buffer + * fragment size. It must be a multiple of four. + */ + W16(ep, sen_genscc.scc_mrblr, 0x5f0); + + /* Set CRC preset and mask. + */ + W32(ep, sen_cpres, 0xffffffff); + W32(ep, sen_cmask, 0xdebb20e3); + + W32(ep, sen_crcec, 0); /* CRC Error counter */ + W32(ep, sen_alec, 0); /* alignment error counter */ + W32(ep, sen_disfc, 0); /* discard frame counter */ + + W16(ep, sen_pads, 0x8888); /* Tx short frame pad character */ + W16(ep, sen_retlim, 15); /* Retry limit threshold */ + + W16(ep, sen_maxflr, 0x5ee); /* maximum frame length register */ + + W16(ep, sen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */ + + W16(ep, sen_maxd1, 0x000005f0); /* maximum DMA1 length */ + W16(ep, sen_maxd2, 0x000005f0); /* maximum DMA2 length */ + + /* Clear hash tables. + */ + W16(ep, sen_gaddr1, 0); + W16(ep, sen_gaddr2, 0); + W16(ep, sen_gaddr3, 0); + W16(ep, sen_gaddr4, 0); + W16(ep, sen_iaddr1, 0); + W16(ep, sen_iaddr2, 0); + W16(ep, sen_iaddr3, 0); + W16(ep, sen_iaddr4, 0); + + /* set address + */ + mac = dev->dev_addr; + paddrh = ((u16) mac[5] << 8) | mac[4]; + paddrm = ((u16) mac[3] << 8) | mac[2]; + paddrl = ((u16) mac[1] << 8) | mac[0]; + + W16(ep, sen_paddrh, paddrh); + W16(ep, sen_paddrm, paddrm); + W16(ep, sen_paddrl, paddrl); + + W16(ep, sen_pper, 0); + W16(ep, sen_taddrl, 0); + W16(ep, sen_taddrm, 0); + W16(ep, sen_taddrh, 0); + + fs_init_bds(dev); + + scc_cr_cmd(fep, CPM_CR_INIT_TRX); + + W16(sccp, scc_scce, 0xffff); + + /* Enable interrupts we wish to service. + */ + W16(sccp, scc_sccm, SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB); + + /* Set GSMR_H to enable all normal operating modes. + * Set GSMR_L to enable Ethernet to MC68160. + */ + W32(sccp, scc_gsmrh, 0); + W32(sccp, scc_gsmrl, + SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | + SCC_GSMRL_MODE_ENET); + + /* Set sync/delimiters. + */ + W16(sccp, scc_dsr, 0xd555); + + /* Set processing mode. Use Ethernet CRC, catch broadcast, and + * start frame search 22 bit times after RENA. + */ + W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22); + + /* Set full duplex mode if needed */ + if (fep->duplex) + S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE); + + S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void stop(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + int i; + + for (i = 0; (R16(sccp, scc_sccm) == 0) && i < SCC_RESET_DELAY; i++) + udelay(1); + + if (i == SCC_RESET_DELAY) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s SCC timeout on graceful transmit stop\n", + dev->name); + + W16(sccp, scc_sccm, 0); + C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + fs_cleanup_bds(dev); +} + +static void pre_request_irq(struct net_device *dev, int irq) +{ + immap_t *immap = fs_enet_immap; + u32 siel; + + /* SIU interrupt */ + if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) { + + siel = in_be32(&immap->im_siu_conf.sc_siel); + if ((irq & 1) == 0) + siel |= (0x80000000 >> irq); + else + siel &= ~(0x80000000 >> (irq & ~1)); + out_be32(&immap->im_siu_conf.sc_siel, siel); + } +} + +static void post_free_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void napi_clear_rx_event(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + W16(sccp, scc_scce, SCC_NAPI_RX_EVENT_MSK); +} + +static void napi_enable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + S16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK); +} + +static void napi_disable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + C16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK); +} + +static void rx_bd_done(struct net_device *dev) +{ + /* nothing */ +} + +static void tx_kickstart(struct net_device *dev) +{ + /* nothing */ +} + +static u32 get_int_events(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + return (u32) R16(sccp, scc_scce); +} + +static void clear_int_events(struct net_device *dev, u32 int_events) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + W16(sccp, scc_scce, int_events & 0xffff); +} + +static void ev_error(struct net_device *dev, u32 int_events) +{ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s SCC ERROR(s) 0x%x\n", dev->name, int_events); +} + +static int get_regs(struct net_device *dev, void *p, int *sizep) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (*sizep < sizeof(scc_t) + sizeof(scc_enet_t)) + return -EINVAL; + + memcpy_fromio(p, fep->scc.sccp, sizeof(scc_t)); + p = (char *)p + sizeof(scc_t); + + memcpy_fromio(p, fep->scc.ep, sizeof(scc_enet_t)); + + return 0; +} + +static int get_regs_len(struct net_device *dev) +{ + return sizeof(scc_t) + sizeof(scc_enet_t); +} + +static void tx_restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + scc_cr_cmd(fep, CPM_CR_RESTART_TX); +} + +/*************************************************************************/ + +const struct fs_ops fs_scc_ops = { + .setup_data = setup_data, + .cleanup_data = cleanup_data, + .set_multicast_list = set_multicast_list, + .restart = restart, + .stop = stop, + .pre_request_irq = pre_request_irq, + .post_free_irq = post_free_irq, + .napi_clear_rx_event = napi_clear_rx_event, + .napi_enable_rx = napi_enable_rx, + .napi_disable_rx = napi_disable_rx, + .rx_bd_done = rx_bd_done, + .tx_kickstart = tx_kickstart, + .get_int_events = get_int_events, + .clear_int_events = clear_int_events, + .ev_error = ev_error, + .get_regs = get_regs, + .get_regs_len = get_regs_len, + .tx_restart = tx_restart, + .allocate_bd = allocate_bd, + .free_bd = free_bd, +}; diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c new file mode 100644 index 000000000000..24a5e2e23d18 --- /dev/null +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -0,0 +1,405 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +#ifdef CONFIG_8xx +static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) +{ + immap_t *im = (immap_t *)fs_enet_immap; + void *dir, *dat, *ppar; + int adv; + u8 msk; + + switch (port) { + case fsiop_porta: + dir = &im->im_ioport.iop_padir; + dat = &im->im_ioport.iop_padat; + ppar = &im->im_ioport.iop_papar; + break; + + case fsiop_portb: + dir = &im->im_cpm.cp_pbdir; + dat = &im->im_cpm.cp_pbdat; + ppar = &im->im_cpm.cp_pbpar; + break; + + case fsiop_portc: + dir = &im->im_ioport.iop_pcdir; + dat = &im->im_ioport.iop_pcdat; + ppar = &im->im_ioport.iop_pcpar; + break; + + case fsiop_portd: + dir = &im->im_ioport.iop_pddir; + dat = &im->im_ioport.iop_pddat; + ppar = &im->im_ioport.iop_pdpar; + break; + + case fsiop_porte: + dir = &im->im_cpm.cp_pedir; + dat = &im->im_cpm.cp_pedat; + ppar = &im->im_cpm.cp_pepar; + break; + + default: + printk(KERN_ERR DRV_MODULE_NAME + "Illegal port value %d!\n", port); + return -EINVAL; + } + + adv = bit >> 3; + dir = (char *)dir + adv; + dat = (char *)dat + adv; + ppar = (char *)ppar + adv; + + msk = 1 << (7 - (bit & 7)); + if ((in_8(ppar) & msk) != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "pin %d on port %d is not general purpose!\n", bit, port); + return -EINVAL; + } + + *dirp = dir; + *datp = dat; + *mskp = msk; + + return 0; +} +#endif + +#ifdef CONFIG_8260 +static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) +{ + iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport; + void *dir, *dat, *ppar; + int adv; + u8 msk; + + switch (port) { + case fsiop_porta: + dir = &io->iop_pdira; + dat = &io->iop_pdata; + ppar = &io->iop_ppara; + break; + + case fsiop_portb: + dir = &io->iop_pdirb; + dat = &io->iop_pdatb; + ppar = &io->iop_pparb; + break; + + case fsiop_portc: + dir = &io->iop_pdirc; + dat = &io->iop_pdatc; + ppar = &io->iop_pparc; + break; + + case fsiop_portd: + dir = &io->iop_pdird; + dat = &io->iop_pdatd; + ppar = &io->iop_ppard; + break; + + default: + printk(KERN_ERR DRV_MODULE_NAME + "Illegal port value %d!\n", port); + return -EINVAL; + } + + adv = bit >> 3; + dir = (char *)dir + adv; + dat = (char *)dat + adv; + ppar = (char *)ppar + adv; + + msk = 1 << (7 - (bit & 7)); + if ((in_8(ppar) & msk) != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "pin %d on port %d is not general purpose!\n", bit, port); + return -EINVAL; + } + + *dirp = dir; + *datp = dat; + *mskp = msk; + + return 0; +} +#endif + +static inline void bb_set(u8 *p, u8 m) +{ + out_8(p, in_8(p) | m); +} + +static inline void bb_clr(u8 *p, u8 m) +{ + out_8(p, in_8(p) & ~m); +} + +static inline int bb_read(u8 *p, u8 m) +{ + return (in_8(p) & m) != 0; +} + +static inline void mdio_active(struct fs_enet_mii_bus *bus) +{ + bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); +} + +static inline void mdio_tristate(struct fs_enet_mii_bus *bus) +{ + bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); +} + +static inline int mdio_read(struct fs_enet_mii_bus *bus) +{ + return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); +} + +static inline void mdio(struct fs_enet_mii_bus *bus, int what) +{ + if (what) + bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + else + bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); +} + +static inline void mdc(struct fs_enet_mii_bus *bus, int what) +{ + if (what) + bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); + else + bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); +} + +static inline void mii_delay(struct fs_enet_mii_bus *bus) +{ + udelay(bus->bus_info->i.bitbang.delay); +} + +/* Utility to send the preamble, address, and register (common to read and write). */ +static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) +{ + int j; + + /* + * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure. + * The IEEE spec says this is a PHY optional requirement. The AMD + * 79C874 requires one after power up and one after a MII communications + * error. This means that we are doing more preambles than we need, + * but it is safer and will be much more robust. + */ + + mdio_active(bus); + mdio(bus, 1); + for (j = 0; j < 32; j++) { + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + } + + /* send the start bit (01) and the read opcode (10) or write (10) */ + mdc(bus, 0); + mdio(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, 1); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, read); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, !read); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + /* send the PHY address */ + for (j = 0; j < 5; j++) { + mdc(bus, 0); + mdio(bus, (addr & 0x10) != 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + addr <<= 1; + } + + /* send the register address */ + for (j = 0; j < 5; j++) { + mdc(bus, 0); + mdio(bus, (reg & 0x10) != 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + reg <<= 1; + } +} + +static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +{ + u16 rdreg; + int ret, j; + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + + bitbang_pre(bus, 1, addr, reg); + + /* tri-state our MDIO I/O pin so we can read */ + mdc(bus, 0); + mdio_tristate(bus); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + /* check the turnaround bit: the PHY should be driving it to zero */ + if (mdio_read(bus) != 0) { + /* PHY didn't drive TA low */ + for (j = 0; j < 32; j++) { + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + } + ret = -1; + goto out; + } + + mdc(bus, 0); + mii_delay(bus); + + /* read 16 bits of register data, MSB first */ + rdreg = 0; + for (j = 0; j < 16; j++) { + mdc(bus, 1); + mii_delay(bus); + rdreg <<= 1; + rdreg |= mdio_read(bus); + mdc(bus, 0); + mii_delay(bus); + } + + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + ret = rdreg; +out: + return ret; +} + +static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) +{ + int j; + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + u16 value = val & 0xffff; + + bitbang_pre(bus, 0, addr, reg); + + /* send the turnaround (10) */ + mdc(bus, 0); + mdio(bus, 1); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + /* write 16 bits of register data, MSB first */ + for (j = 0; j < 16; j++) { + mdc(bus, 0); + mdio(bus, (value & 0x8000) != 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + value <<= 1; + } + + /* + * Tri-state the MDIO line. + */ + mdio_tristate(bus); + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); +} + +int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus) +{ + const struct fs_mii_bus_info *bi = bus->bus_info; + int r; + + r = bitbang_prep_bit(&bus->bitbang.mdio_dir, + &bus->bitbang.mdio_dat, + &bus->bitbang.mdio_msk, + bi->i.bitbang.mdio_port, + bi->i.bitbang.mdio_bit); + if (r != 0) + return r; + + r = bitbang_prep_bit(&bus->bitbang.mdc_dir, + &bus->bitbang.mdc_dat, + &bus->bitbang.mdc_msk, + bi->i.bitbang.mdc_port, + bi->i.bitbang.mdc_bit); + if (r != 0) + return r; + + bus->mii_read = mii_read; + bus->mii_write = mii_write; + + return 0; +} diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c new file mode 100644 index 000000000000..b3e192d612e5 --- /dev/null +++ b/drivers/net/fs_enet/mii-fixed.c @@ -0,0 +1,92 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +static const u16 mii_regs[7] = { + 0x3100, + 0x786d, + 0x0fff, + 0x0fff, + 0x01e1, + 0x45e1, + 0x0003, +}; + +static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +{ + int ret = 0; + + if ((unsigned int)location >= ARRAY_SIZE(mii_regs)) + return -1; + + if (location != 5) + ret = mii_regs[location]; + else + ret = bus->fixed.lpa; + + return ret; +} + +static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) +{ + /* do nothing */ +} + +int fs_mii_fixed_init(struct fs_enet_mii_bus *bus) +{ + const struct fs_mii_bus_info *bi = bus->bus_info; + + bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */ + + /* if speed is fixed at 10Mb, remove 100Mb modes */ + if (bi->i.fixed.speed == 10) + bus->fixed.lpa &= ~LPA_100; + + /* if duplex is half, remove full duplex modes */ + if (bi->i.fixed.duplex == 0) + bus->fixed.lpa &= ~LPA_DUPLEX; + + bus->mii_read = mii_read; + bus->mii_write = mii_write; + + return 0; +} diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h new file mode 100644 index 000000000000..bef23bbf8690 --- /dev/null +++ b/include/linux/fs_enet_pd.h @@ -0,0 +1,136 @@ +/* + * Platform information definitions for the + * universal Freescale Ethernet driver. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_ENET_PD_H +#define FS_ENET_PD_H + +#include +#include + +#define FS_ENET_NAME "fs_enet" + +enum fs_id { + fsid_fec1, + fsid_fec2, + fsid_fcc1, + fsid_fcc2, + fsid_fcc3, + fsid_scc1, + fsid_scc2, + fsid_scc3, + fsid_scc4, +}; + +#define FS_MAX_INDEX 9 + +static inline int fs_get_fec_index(enum fs_id id) +{ + if (id >= fsid_fec1 && id <= fsid_fec2) + return id - fsid_fec1; + return -1; +} + +static inline int fs_get_fcc_index(enum fs_id id) +{ + if (id >= fsid_fcc1 && id <= fsid_fcc3) + return id - fsid_fcc1; + return -1; +} + +static inline int fs_get_scc_index(enum fs_id id) +{ + if (id >= fsid_scc1 && id <= fsid_scc4) + return id - fsid_scc1; + return -1; +} + +enum fs_mii_method { + fsmii_fixed, + fsmii_fec, + fsmii_bitbang, +}; + +enum fs_ioport { + fsiop_porta, + fsiop_portb, + fsiop_portc, + fsiop_portd, + fsiop_porte, +}; + +struct fs_mii_bus_info { + int method; /* mii method */ + int id; /* the id of the mii_bus */ + int disable_aneg; /* if the controller needs to negothiate speed & duplex */ + int lpa; /* the default board-specific vallues will be applied otherwise */ + + union { + struct { + int duplex; + int speed; + } fixed; + + struct { + /* nothing */ + } fec; + + struct { + /* nothing */ + } scc; + + struct { + int mdio_port; /* port & bit for MDIO */ + int mdio_bit; + int mdc_port; /* port & bit for MDC */ + int mdc_bit; + int delay; /* delay in us */ + } bitbang; + } i; +}; + +struct fs_platform_info { + + void(*init_ioports)(void); + /* device specific information */ + int fs_no; /* controller index */ + + u32 cp_page; /* CPM page */ + u32 cp_block; /* CPM sblock */ + + u32 clk_trx; /* some stuff for pins & mux configuration*/ + u32 clk_route; + u32 clk_mask; + + u32 mem_offset; + u32 dpram_offset; + u32 fcc_regs_c; + + u32 device_flags; + + int phy_addr; /* the phy address (-1 no phy) */ + int phy_irq; /* the phy irq (if it exists) */ + + const struct fs_mii_bus_info *bus_info; + + int rx_ring, tx_ring; /* number of buffers on rx */ + __u8 macaddr[6]; /* mac address */ + int rx_copybreak; /* limit we copy small frames */ + int use_napi; /* use NAPI */ + int napi_weight; /* NAPI weight */ + + int use_rmii; /* use RMII mode */ +}; + +#endif -- cgit v1.2.3 From 19c1f3ca4272008a256cc153f3e3feb097799070 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 28 Oct 2005 21:37:29 +0100 Subject: [MMC] wbsd suspend support Proper handling of suspend/resume in the wbsd driver. Signed-off-by: Pierre Ossman Signed-off-by: Russell King --- drivers/mmc/wbsd.c | 119 ++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 91 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 25f7ce7b3bc0..3ace875decc4 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1033,13 +1033,16 @@ static void wbsd_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) } else { - setup &= ~WBSD_DAT3_H; + if (setup & WBSD_DAT3_H) + { + setup &= ~WBSD_DAT3_H; - /* - * We cannot resume card detection immediatly - * because of capacitance and delays in the chip. - */ - mod_timer(&host->ignore_timer, jiffies + HZ/100); + /* + * We cannot resume card detection immediatly + * because of capacitance and delays in the chip. + */ + mod_timer(&host->ignore_timer, jiffies + HZ/100); + } } wbsd_write_index(host, WBSD_IDX_SETUP, setup); @@ -1461,8 +1464,10 @@ static int __devinit wbsd_scan(struct wbsd_host* host) { id = 0xFFFF; - outb(unlock_codes[j], config_ports[i]); - outb(unlock_codes[j], config_ports[i]); + host->config = config_ports[i]; + host->unlock_code = unlock_codes[j]; + + wbsd_unlock_config(host); outb(WBSD_CONF_ID_HI, config_ports[i]); id = inb(config_ports[i] + 1) << 8; @@ -1470,13 +1475,13 @@ static int __devinit wbsd_scan(struct wbsd_host* host) outb(WBSD_CONF_ID_LO, config_ports[i]); id |= inb(config_ports[i] + 1); + wbsd_lock_config(host); + for (k = 0;k < sizeof(valid_ids)/sizeof(int);k++) { if (id == valid_ids[k]) { host->chip_id = id; - host->config = config_ports[i]; - host->unlock_code = unlock_codes[i]; return 0; } @@ -1487,13 +1492,14 @@ static int __devinit wbsd_scan(struct wbsd_host* host) DBG("Unknown hardware (id %x) found at %x\n", id, config_ports[i]); } - - outb(LOCK_CODE, config_ports[i]); } release_region(config_ports[i], 2); } + host->config = 0; + host->unlock_code = 0; + return -ENODEV; } @@ -1699,8 +1705,10 @@ static void __devexit wbsd_release_resources(struct wbsd_host* host) * Configure the resources the chip should use. */ -static void __devinit wbsd_chip_config(struct wbsd_host* host) +static void wbsd_chip_config(struct wbsd_host* host) { + wbsd_unlock_config(host); + /* * Reset the chip. */ @@ -1733,16 +1741,20 @@ static void __devinit wbsd_chip_config(struct wbsd_host* host) */ wbsd_write_config(host, WBSD_CONF_ENABLE, 1); wbsd_write_config(host, WBSD_CONF_POWER, 0x20); + + wbsd_lock_config(host); } /* * Check that configured resources are correct. */ -static int __devinit wbsd_chip_validate(struct wbsd_host* host) +static int wbsd_chip_validate(struct wbsd_host* host) { int base, irq, dma; + wbsd_unlock_config(host); + /* * Select SD/MMC function. */ @@ -1758,6 +1770,8 @@ static int __devinit wbsd_chip_validate(struct wbsd_host* host) dma = wbsd_read_config(host, WBSD_CONF_DRQ); + wbsd_lock_config(host); + /* * Validate against given configuration. */ @@ -1771,6 +1785,20 @@ static int __devinit wbsd_chip_validate(struct wbsd_host* host) return 1; } +/* + * Powers down the SD function + */ + +static void wbsd_chip_poweroff(struct wbsd_host* host) +{ + wbsd_unlock_config(host); + + wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); + wbsd_write_config(host, WBSD_CONF_ENABLE, 0); + + wbsd_lock_config(host); +} + /*****************************************************************************\ * * * Devices setup and shutdown * @@ -1844,7 +1872,11 @@ static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma, */ #ifdef CONFIG_PM if (host->config) + { + wbsd_unlock_config(host); wbsd_write_config(host, WBSD_CONF_PME, 0xA0); + wbsd_lock_config(host); + } #endif /* * Allow device to initialise itself properly. @@ -1885,16 +1917,11 @@ static void __devexit wbsd_shutdown(struct device* dev, int pnp) mmc_remove_host(mmc); + /* + * Power down the SD/MMC function. + */ if (!pnp) - { - /* - * Power down the SD/MMC function. - */ - wbsd_unlock_config(host); - wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); - wbsd_write_config(host, WBSD_CONF_ENABLE, 0); - wbsd_lock_config(host); - } + wbsd_chip_poweroff(host); wbsd_release_resources(host); @@ -1955,23 +1982,59 @@ static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) */ #ifdef CONFIG_PM + static int wbsd_suspend(struct device *dev, pm_message_t state) { - DBGF("Not yet supported\n"); + struct mmc_host *mmc = dev_get_drvdata(dev); + struct wbsd_host *host; + int ret; + + if (!mmc) + return 0; + + DBG("Suspending...\n"); + + ret = mmc_suspend_host(mmc, state); + if (!ret) + return ret; + + host = mmc_priv(mmc); + + wbsd_chip_poweroff(host); return 0; } static int wbsd_resume(struct device *dev) { - DBGF("Not yet supported\n"); + struct mmc_host *mmc = dev_get_drvdata(dev); + struct wbsd_host *host; - return 0; + if (!mmc) + return 0; + + DBG("Resuming...\n"); + + host = mmc_priv(mmc); + + wbsd_chip_config(host); + + /* + * Allow device to initialise itself properly. + */ + mdelay(5); + + wbsd_init_device(host); + + return mmc_resume_host(mmc); } -#else + +#else /* CONFIG_PM */ + #define wbsd_suspend NULL #define wbsd_resume NULL -#endif + +#endif /* CONFIG_PM */ static struct platform_device *wbsd_device; -- cgit v1.2.3 From 89358f90ab6f6657d386e77e19c805d7ab88694f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 28 Oct 2005 16:38:02 -0400 Subject: [netdrvr b44] include linux/dma-mapping.h to eliminate warning --- drivers/net/b44.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 225d14fd9239..ab845076ff9f 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From b71b95efa5abca33e1bfb85d55162c7f99f54c23 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Fri, 28 Oct 2005 12:23:47 +0200 Subject: [PATCH] sundance: fix DFE-580TX Tx Underrun Under heavy PCI bus load, ports of the DFE-580TX 4-ethernet port board stop working, with currently no other cure than a powercycle. Here is a tested fix. By the way, I also fixed some references and attribution. Signed-off-by: Philippe De Muyter Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 62 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 5de0554fd7c6..0ab9c38b4a34 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -80,7 +80,7 @@ I/O access could affect performance in ARM-based system - Add Linux software VLAN support - Version LK1.08 (D-Link): + Version LK1.08 (Philippe De Muyter phdm@macqel.be): - Fix bug of custom mac address (StationAddr register only accept word write) @@ -91,11 +91,14 @@ Version LK1.09a (ICPlus): - Add the delay time in reading the contents of EEPROM + Version LK1.10 (Philippe De Muyter phdm@macqel.be): + - Make 'unblock interface after Tx underrun' work + */ #define DRV_NAME "sundance" -#define DRV_VERSION "1.01+LK1.09a" -#define DRV_RELDATE "10-Jul-2003" +#define DRV_VERSION "1.01+LK1.10" +#define DRV_RELDATE "28-Oct-2005" /* The user-configurable values. @@ -263,8 +266,10 @@ IV. Notes IVb. References The Sundance ST201 datasheet, preliminary version. -http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html -http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html +The Kendin KS8723 datasheet, preliminary version. +The ICplus IP100 datasheet, preliminary version. +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html IVc. Errata @@ -500,6 +505,25 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int netdev_close(struct net_device *dev); static struct ethtool_ops ethtool_ops; +static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base + ASICCtrl; + int countdown; + + /* ST201 documentation states ASICCtrl is a 32bit register */ + iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); + /* ST201 documentation states reset can take up to 1 ms */ + countdown = 10 + 1; + while (ioread32 (ioaddr) & (ResetBusy << 16)) { + if (--countdown == 0) { + printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); + break; + } + udelay(100); + } +} + static int __devinit sundance_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1190,23 +1214,33 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs ("%s: Transmit status is %2.2x.\n", dev->name, tx_status); if (tx_status & 0x1e) { + if (netif_msg_tx_err(np)) + printk("%s: Transmit error status %4.4x.\n", + dev->name, tx_status); np->stats.tx_errors++; if (tx_status & 0x10) np->stats.tx_fifo_errors++; if (tx_status & 0x08) np->stats.collisions++; + if (tx_status & 0x04) + np->stats.tx_fifo_errors++; if (tx_status & 0x02) np->stats.tx_window_errors++; - /* This reset has not been verified!. */ - if (tx_status & 0x10) { /* Reset the Tx. */ - np->stats.tx_fifo_errors++; - spin_lock(&np->lock); - reset_tx(dev); - spin_unlock(&np->lock); + /* + ** This reset has been verified on + ** DFE-580TX boards ! phdm@macqel.be. + */ + if (tx_status & 0x10) { /* TxUnderrun */ + unsigned short txthreshold; + + txthreshold = ioread16 (ioaddr + TxStartThresh); + /* Restart Tx FIFO and transmitter */ + sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); + iowrite16 (txthreshold, ioaddr + TxStartThresh); + /* No need to reset the Tx pointer here */ } - if (tx_status & 0x1e) /* Restart the Tx. */ - iowrite16 (TxEnable, - ioaddr + MACCtrl1); + /* Restart the Tx. */ + iowrite16 (TxEnable, ioaddr + MACCtrl1); } /* Yup, this is a documentation bug. It cost me *hours*. */ iowrite16 (0, ioaddr + TxStatus); -- cgit v1.2.3 From 37448f7d39717db7c1098c1a88b9074694c69797 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Mon, 10 Oct 2005 16:58:14 -0700 Subject: [PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin -- Kconfig | 72 ibm_emac/Makefile | 13 ibm_emac/ibm_emac.h | 418 +++-- ibm_emac/ibm_emac_core.c | 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h | 313 ++-- ibm_emac/ibm_emac_debug.c | 377 ++--- ibm_emac/ibm_emac_debug.h | 63 ibm_emac/ibm_emac_mal.c | 674 +++++---- ibm_emac/ibm_emac_mal.h | 336 +++- ibm_emac/ibm_emac_phy.c | 335 ++-- ibm_emac/ibm_emac_phy.h | 105 - ibm_emac/ibm_emac_rgmii.c | 201 ++ ibm_emac/ibm_emac_rgmii.h | 68 ibm_emac/ibm_emac_tah.c | 111 + ibm_emac/ibm_emac_tah.h | 96 - ibm_emac/ibm_emac_zmii.c | 255 +++ ibm_emac/ibm_emac_zmii.h | 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 72 +- drivers/net/ibm_emac/Makefile | 13 +- drivers/net/ibm_emac/ibm_emac.h | 408 ++-- drivers/net/ibm_emac/ibm_emac_core.c | 3402 +++++++++++++++++---------------- drivers/net/ibm_emac/ibm_emac_core.h | 313 +-- drivers/net/ibm_emac/ibm_emac_debug.c | 363 ++-- drivers/net/ibm_emac/ibm_emac_debug.h | 63 + drivers/net/ibm_emac/ibm_emac_mal.c | 674 ++++--- drivers/net/ibm_emac/ibm_emac_mal.h | 332 +++- drivers/net/ibm_emac/ibm_emac_phy.c | 335 ++-- drivers/net/ibm_emac/ibm_emac_phy.h | 105 +- drivers/net/ibm_emac/ibm_emac_rgmii.c | 201 ++ drivers/net/ibm_emac/ibm_emac_rgmii.h | 60 +- drivers/net/ibm_emac/ibm_emac_tah.c | 111 ++ drivers/net/ibm_emac/ibm_emac_tah.h | 96 +- drivers/net/ibm_emac/ibm_emac_zmii.c | 255 +++ drivers/net/ibm_emac/ibm_emac_zmii.h | 104 +- 17 files changed, 4085 insertions(+), 2822 deletions(-) create mode 100644 drivers/net/ibm_emac/ibm_emac_debug.h create mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.c create mode 100644 drivers/net/ibm_emac/ibm_emac_tah.c create mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.c (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 27732fdeeea4..54ab70e7eff4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1163,38 +1163,74 @@ config IBMVETH be called ibmveth. config IBM_EMAC - bool "IBM PPC4xx EMAC driver support" + tristate "PowerPC 4xx on-chip Ethernet support" depends on 4xx - select CRC32 - ---help--- - This driver supports the IBM PPC4xx EMAC family of on-chip - Ethernet controllers. - -config IBM_EMAC_ERRMSG - bool "Verbose error messages" - depends on IBM_EMAC && BROKEN + help + This driver supports the PowerPC 4xx EMAC family of on-chip + Ethernet controllers. config IBM_EMAC_RXB int "Number of receive buffers" depends on IBM_EMAC - default "128" if IBM_EMAC4 - default "64" + default "128" config IBM_EMAC_TXB int "Number of transmit buffers" depends on IBM_EMAC - default "128" if IBM_EMAC4 - default "8" + default "64" + +config IBM_EMAC_POLL_WEIGHT + int "MAL NAPI polling weight" + depends on IBM_EMAC + default "32" -config IBM_EMAC_FGAP - int "Frame gap" +config IBM_EMAC_RX_COPY_THRESHOLD + int "RX skb copy threshold (bytes)" depends on IBM_EMAC - default "8" + default "256" -config IBM_EMAC_SKBRES - int "Skb reserve amount" +config IBM_EMAC_RX_SKB_HEADROOM + int "Additional RX skb headroom (bytes)" depends on IBM_EMAC default "0" + help + Additional receive skb headroom. Note, that driver + will always reserve at least 2 bytes to make IP header + aligned, so usualy there is no need to add any additional + headroom. + + If unsure, set to 0. + +config IBM_EMAC_PHY_RX_CLK_FIX + bool "PHY Rx clock workaround" + depends on IBM_EMAC && (405EP || 440GX || 440EP) + help + Enable this if EMAC attached to a PHY which doesn't generate + RX clock if there is no link, if this is the case, you will + see "TX disable timeout" or "RX disable timeout" in the system + log. + + If unsure, say N. + +config IBM_EMAC_DEBUG + bool "Debugging" + depends on IBM_EMAC + default n + +config IBM_EMAC_ZMII + bool + depends on IBM_EMAC && (NP405H || NP405L || 44x) + default y + +config IBM_EMAC_RGMII + bool + depends on IBM_EMAC && 440GX + default y + +config IBM_EMAC_TAH + bool + depends on IBM_EMAC && 440GX + default y config NET_PCI bool "EISA, VLB, PCI and on board controllers" diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile index 7f583a333c24..f98ddf0e807a 100644 --- a/drivers/net/ibm_emac/Makefile +++ b/drivers/net/ibm_emac/Makefile @@ -1,12 +1,11 @@ # -# Makefile for the IBM PPC4xx EMAC controllers +# Makefile for the PowerPC 4xx on-chip ethernet driver # obj-$(CONFIG_IBM_EMAC) += ibm_emac.o -ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o - -# Only need this if you want to see additional debug messages -ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y) -ibm_emac-objs += ibm_emac_debug.o -endif +ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o +ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o +ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o +ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o +ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h index 15d5a0e82862..28c476f28c20 100644 --- a/drivers/net/ibm_emac/ibm_emac.h +++ b/drivers/net/ibm_emac/ibm_emac.h @@ -1,110 +1,142 @@ /* - * ibm_emac.h + * drivers/net/ibm_emac/ibm_emac.h * + * Register definitions for PowerPC 4xx on-chip ethernet contoller * - * Armin Kuster akuster@mvista.com - * June, 2002 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Copyright 2002 MontaVista Softare Inc. + * Based on original work by + * Matt Porter + * Armin Kuster + * Copyright 2002-2004 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ +#ifndef __IBM_EMAC_H_ +#define __IBM_EMAC_H_ + +#include +#include + +/* This is a simple check to prevent use of this driver on non-tested SoCs */ +#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \ + !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \ + !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) +#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK" +#endif + +/* EMAC registers Write Access rules */ +struct emac_regs { + u32 mr0; /* special */ + u32 mr1; /* Reset */ + u32 tmr0; /* special */ + u32 tmr1; /* special */ + u32 rmr; /* Reset */ + u32 isr; /* Always */ + u32 iser; /* Reset */ + u32 iahr; /* Reset, R, T */ + u32 ialr; /* Reset, R, T */ + u32 vtpid; /* Reset, R, T */ + u32 vtci; /* Reset, R, T */ + u32 ptr; /* Reset, T */ + u32 iaht1; /* Reset, R */ + u32 iaht2; /* Reset, R */ + u32 iaht3; /* Reset, R */ + u32 iaht4; /* Reset, R */ + u32 gaht1; /* Reset, R */ + u32 gaht2; /* Reset, R */ + u32 gaht3; /* Reset, R */ + u32 gaht4; /* Reset, R */ + u32 lsah; + u32 lsal; + u32 ipgvr; /* Reset, T */ + u32 stacr; /* special */ + u32 trtr; /* special */ + u32 rwmr; /* Reset */ + u32 octx; + u32 ocrx; + u32 ipcr; +}; + +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_ETHTOOL_REGS_VER 0 +#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32)) +#else +#define EMAC_ETHTOOL_REGS_VER 1 +#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs) +#endif -#ifndef _IBM_EMAC_H_ -#define _IBM_EMAC_H_ -/* General defines needed for the driver */ +/* EMACx_MR0 */ +#define EMAC_MR0_RXI 0x80000000 +#define EMAC_MR0_TXI 0x40000000 +#define EMAC_MR0_SRST 0x20000000 +#define EMAC_MR0_TXE 0x10000000 +#define EMAC_MR0_RXE 0x08000000 +#define EMAC_MR0_WKE 0x04000000 -/* Emac */ -typedef struct emac_regs { - u32 em0mr0; - u32 em0mr1; - u32 em0tmr0; - u32 em0tmr1; - u32 em0rmr; - u32 em0isr; - u32 em0iser; - u32 em0iahr; - u32 em0ialr; - u32 em0vtpid; - u32 em0vtci; - u32 em0ptr; - u32 em0iaht1; - u32 em0iaht2; - u32 em0iaht3; - u32 em0iaht4; - u32 em0gaht1; - u32 em0gaht2; - u32 em0gaht3; - u32 em0gaht4; - u32 em0lsah; - u32 em0lsal; - u32 em0ipgvr; - u32 em0stacr; - u32 em0trtr; - u32 em0rwmr; -} emac_t; +/* EMACx_MR1 */ +#define EMAC_MR1_FDE 0x80000000 +#define EMAC_MR1_ILE 0x40000000 +#define EMAC_MR1_VLE 0x20000000 +#define EMAC_MR1_EIFC 0x10000000 +#define EMAC_MR1_APP 0x08000000 +#define EMAC_MR1_IST 0x01000000 -/* MODE REG 0 */ -#define EMAC_M0_RXI 0x80000000 -#define EMAC_M0_TXI 0x40000000 -#define EMAC_M0_SRST 0x20000000 -#define EMAC_M0_TXE 0x10000000 -#define EMAC_M0_RXE 0x08000000 -#define EMAC_M0_WKE 0x04000000 +#define EMAC_MR1_MF_MASK 0x00c00000 +#define EMAC_MR1_MF_10 0x00000000 +#define EMAC_MR1_MF_100 0x00400000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_MR1_MF_1000 0x00000000 +#define EMAC_MR1_MF_1000GPCS 0x00000000 +#define EMAC_MR1_MF_IPPA(id) 0x00000000 +#else +#define EMAC_MR1_MF_1000 0x00800000 +#define EMAC_MR1_MF_1000GPCS 0x00c00000 +#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6) +#endif -/* MODE Reg 1 */ -#define EMAC_M1_FDE 0x80000000 -#define EMAC_M1_ILE 0x40000000 -#define EMAC_M1_VLE 0x20000000 -#define EMAC_M1_EIFC 0x10000000 -#define EMAC_M1_APP 0x08000000 -#define EMAC_M1_AEMI 0x02000000 -#define EMAC_M1_IST 0x01000000 -#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */ -#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */ -#define EMAC_M1_MF_100MBPS 0x00400000 -#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */ -#define EMAC_M1_TR 0x00008000 -#ifdef CONFIG_IBM_EMAC4 -#define EMAC_M1_RFS_8K 0x00200000 -#define EMAC_M1_RFS_4K 0x00180000 -#define EMAC_M1_RFS_2K 0x00100000 -#define EMAC_M1_RFS_1K 0x00080000 -#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_8K 0x00040000 -#define EMAC_M1_TX_FIFO_4K 0x00030000 -#define EMAC_M1_TX_FIFO_2K 0x00020000 -#define EMAC_M1_TX_FIFO_1K 0x00010000 -#define EMAC_M1_TX_TR 0x00008000 -#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */ -#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */ -#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */ -#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */ -#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */ -#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */ -#else /* CONFIG_IBM_EMAC4 */ -#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ -#define EMAC_M1_RFS_2K 0x00200000 -#define EMAC_M1_RFS_1K 0x00100000 -#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_1K 0x00040000 -#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ -#define EMAC_M1_TR1_DEPEND 0x00004000 -#define EMAC_M1_TR1_MULTI 0x00002000 -#define EMAC_M1_JUMBO_ENABLE 0x00001000 -#endif /* CONFIG_IBM_EMAC4 */ -#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \ - EMAC_M1_APP | \ - EMAC_M1_TR | EMAC_M1_VLE) +#define EMAC_TX_FIFO_SIZE 2048 -/* Transmit Mode Register 0 */ -#define EMAC_TMR0_GNP0 0x80000000 -#define EMAC_TMR0_GNP1 0x40000000 -#define EMAC_TMR0_GNPD 0x20000000 -#define EMAC_TMR0_FC 0x10000000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_MR1_RFS_4K 0x00300000 +#define EMAC_MR1_RFS_16K 0x00000000 +#define EMAC_RX_FIFO_SIZE(gige) 4096 +#define EMAC_MR1_TFS_2K 0x00080000 +#define EMAC_MR1_TR0_MULT 0x00008000 +#define EMAC_MR1_JPSM 0x00000000 +#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT) +#else +#define EMAC_MR1_RFS_4K 0x00180000 +#define EMAC_MR1_RFS_16K 0x00280000 +#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096) +#define EMAC_MR1_TFS_2K 0x00020000 +#define EMAC_MR1_TR 0x00008000 +#define EMAC_MR1_MWSW_001 0x00001000 +#define EMAC_MR1_JPSM 0x00000800 +#define EMAC_MR1_OBCI_MASK 0x00000038 +#define EMAC_MR1_OBCI_50 0x00000000 +#define EMAC_MR1_OBCI_66 0x00000008 +#define EMAC_MR1_OBCI_83 0x00000010 +#define EMAC_MR1_OBCI_100 0x00000018 +#define EMAC_MR1_OBCI_100P 0x00000020 +#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \ + (freq) <= 66 ? EMAC_MR1_OBCI_66 : \ + (freq) <= 83 ? EMAC_MR1_OBCI_83 : \ + (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P) +#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \ + EMAC_MR1_MWSW_001 | EMAC_MR1_OBCI(opb)) +#endif + +/* EMACx_TMR0 */ +#define EMAC_TMR0_GNP 0x80000000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_TMR0_DEFAULT 0x00000000 +#else #define EMAC_TMR0_TFAE_2_32 0x00000001 #define EMAC_TMR0_TFAE_4_64 0x00000002 #define EMAC_TMR0_TFAE_8_128 0x00000003 @@ -112,14 +144,36 @@ typedef struct emac_regs { #define EMAC_TMR0_TFAE_32_512 0x00000005 #define EMAC_TMR0_TFAE_64_1024 0x00000006 #define EMAC_TMR0_TFAE_128_2048 0x00000007 +#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 +#endif +#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT) + +/* EMACx_TMR1 */ + +/* IBM manuals are not very clear here. + * This is my interpretation of how things are. --ebs + */ +#if defined(CONFIG_40x) +#define EMAC_FIFO_ENTRY_SIZE 8 +#define EMAC_MAL_BURST_SIZE (16 * 4) +#else +#define EMAC_FIFO_ENTRY_SIZE 16 +#define EMAC_MAL_BURST_SIZE (64 * 4) +#endif + +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16)) +#else +#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14)) +#endif -/* Receive Mode Register */ +/* EMACx_RMR */ #define EMAC_RMR_SP 0x80000000 #define EMAC_RMR_SFCS 0x40000000 -#define EMAC_RMR_ARRP 0x20000000 -#define EMAC_RMR_ARP 0x10000000 -#define EMAC_RMR_AROP 0x08000000 -#define EMAC_RMR_ARPI 0x04000000 +#define EMAC_RMR_RRP 0x20000000 +#define EMAC_RMR_RFP 0x10000000 +#define EMAC_RMR_ROP 0x08000000 +#define EMAC_RMR_RPIR 0x04000000 #define EMAC_RMR_PPP 0x02000000 #define EMAC_RMR_PME 0x01000000 #define EMAC_RMR_PMME 0x00800000 @@ -127,6 +181,9 @@ typedef struct emac_regs { #define EMAC_RMR_MIAE 0x00200000 #define EMAC_RMR_BAE 0x00100000 #define EMAC_RMR_MAE 0x00080000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_RMR_BASE 0x00000000 +#else #define EMAC_RMR_RFAF_2_32 0x00000001 #define EMAC_RMR_RFAF_4_64 0x00000002 #define EMAC_RMR_RFAF_8_128 0x00000003 @@ -134,9 +191,21 @@ typedef struct emac_regs { #define EMAC_RMR_RFAF_32_512 0x00000005 #define EMAC_RMR_RFAF_64_1024 0x00000006 #define EMAC_RMR_RFAF_128_2048 0x00000007 -#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE) +#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048 +#endif -/* Interrupt Status & enable Regs */ +/* EMACx_ISR & EMACx_ISER */ +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_ISR_TXPE 0x00000000 +#define EMAC_ISR_RXPE 0x00000000 +#define EMAC_ISR_TXUE 0x00000000 +#define EMAC_ISR_RXOE 0x00000000 +#else +#define EMAC_ISR_TXPE 0x20000000 +#define EMAC_ISR_RXPE 0x10000000 +#define EMAC_ISR_TXUE 0x08000000 +#define EMAC_ISR_RXOE 0x04000000 +#endif #define EMAC_ISR_OVR 0x02000000 #define EMAC_ISR_PP 0x01000000 #define EMAC_ISR_BP 0x00800000 @@ -147,53 +216,62 @@ typedef struct emac_regs { #define EMAC_ISR_PTLE 0x00040000 #define EMAC_ISR_ORE 0x00020000 #define EMAC_ISR_IRE 0x00010000 -#define EMAC_ISR_DBDM 0x00000200 -#define EMAC_ISR_DB0 0x00000100 -#define EMAC_ISR_SE0 0x00000080 -#define EMAC_ISR_TE0 0x00000040 -#define EMAC_ISR_DB1 0x00000020 -#define EMAC_ISR_SE1 0x00000010 -#define EMAC_ISR_TE1 0x00000008 +#define EMAC_ISR_SQE 0x00000080 +#define EMAC_ISR_TE 0x00000040 #define EMAC_ISR_MOS 0x00000002 #define EMAC_ISR_MOF 0x00000001 -/* STA CONTROL REG */ +/* EMACx_STACR */ +#define EMAC_STACR_PHYD_MASK 0xffff +#define EMAC_STACR_PHYD_SHIFT 16 #define EMAC_STACR_OC 0x00008000 #define EMAC_STACR_PHYE 0x00004000 -#define EMAC_STACR_WRITE 0x00002000 -#define EMAC_STACR_READ 0x00001000 -#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */ -#define EMAC_STACR_CLK_66MHZ 0x00000400 -#define EMAC_STACR_CLK_100MHZ 0x00000C00 +#define EMAC_STACR_STAC_MASK 0x00003000 +#define EMAC_STACR_STAC_READ 0x00001000 +#define EMAC_STACR_STAC_WRITE 0x00002000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_STACR_OPBC_MASK 0x00000C00 +#define EMAC_STACR_OPBC_50 0x00000000 +#define EMAC_STACR_OPBC_66 0x00000400 +#define EMAC_STACR_OPBC_83 0x00000800 +#define EMAC_STACR_OPBC_100 0x00000C00 +#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \ + (freq) <= 66 ? EMAC_STACR_OPBC_66 : \ + (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100) +#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb) +#else +#define EMAC_STACR_BASE(opb) 0x00000000 +#endif +#define EMAC_STACR_PCDA_MASK 0x1f +#define EMAC_STACR_PCDA_SHIFT 5 +#define EMAC_STACR_PRA_MASK 0x1f + +/* EMACx_TRTR */ +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_TRTR_SHIFT 27 +#else +#define EMAC_TRTR_SHIFT 24 +#endif +#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT) -/* Transmit Request Threshold Register */ -#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */ -#define EMAC_TRTR_1024 0x0f000000 -#define EMAC_TRTR_512 0x07000000 -#define EMAC_TRTR_256 0x03000000 -#define EMAC_TRTR_192 0x10000000 -#define EMAC_TRTR_128 0x01000000 +/* EMACx_RWMR */ +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7)) +#else +#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6)) +#endif +/* EMAC specific TX descriptor control fields (write access) */ #define EMAC_TX_CTRL_GFCS 0x0200 #define EMAC_TX_CTRL_GP 0x0100 #define EMAC_TX_CTRL_ISA 0x0080 #define EMAC_TX_CTRL_RSA 0x0040 #define EMAC_TX_CTRL_IVT 0x0020 #define EMAC_TX_CTRL_RVT 0x0010 -#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */ -#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */ +#define EMAC_TX_CTRL_TAH_CSUM 0x000e -#define EMAC_TX_CTRL_DFLT ( \ - MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP ) - -/* madmal transmit status / Control bits */ +/* EMAC specific TX descriptor status fields (read access) */ #define EMAC_TX_ST_BFCS 0x0200 -#define EMAC_TX_ST_BPP 0x0100 #define EMAC_TX_ST_LCS 0x0080 #define EMAC_TX_ST_ED 0x0040 #define EMAC_TX_ST_EC 0x0020 @@ -202,8 +280,16 @@ typedef struct emac_regs { #define EMAC_TX_ST_SC 0x0004 #define EMAC_TX_ST_UR 0x0002 #define EMAC_TX_ST_SQE 0x0001 +#if !defined(CONFIG_IBM_EMAC_TAH) +#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ + EMAC_TX_ST_EC | EMAC_TX_ST_LC | \ + EMAC_TX_ST_MC | EMAC_TX_ST_UR)) +#else +#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ + EMAC_TX_ST_EC | EMAC_TX_ST_LC)) +#endif -/* madmal receive status / Control bits */ +/* EMAC specific RX descriptor status fields (read access) */ #define EMAC_RX_ST_OE 0x0200 #define EMAC_RX_ST_PP 0x0100 #define EMAC_RX_ST_BP 0x0080 @@ -214,54 +300,10 @@ typedef struct emac_regs { #define EMAC_RX_ST_PTL 0x0004 #define EMAC_RX_ST_ORE 0x0002 #define EMAC_RX_ST_IRE 0x0001 -#define EMAC_BAD_RX_PACKET 0x02ff -#define EMAC_CSUM_VER_ERROR 0x0003 - -/* identify a bad rx packet dependent on emac features */ -#ifdef CONFIG_IBM_EMAC4 -#define EMAC_IS_BAD_RX_PACKET(desc) \ - (((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \ - ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \ - ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE))) -#else -#define EMAC_IS_BAD_RX_PACKET(desc) \ - (desc & EMAC_BAD_RX_PACKET) -#endif - -/* SoC implementation specific EMAC register defaults */ -#if defined(CONFIG_440GP) -#define EMAC_RWMR_DEFAULT 0x80009000 -#define EMAC_TMR0_DEFAULT 0x00000000 -#define EMAC_TMR1_DEFAULT 0xf8640000 -#elif defined(CONFIG_440GX) -#define EMAC_RWMR_DEFAULT 0x1000a200 -#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 -#define EMAC_TMR1_DEFAULT 0xa00f0000 -#elif defined(CONFIG_440SP) -#define EMAC_RWMR_DEFAULT 0x08002000 -#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048 -#define EMAC_TMR1_DEFAULT 0xf8200000 -#else -#define EMAC_RWMR_DEFAULT 0x0f002000 -#define EMAC_TMR0_DEFAULT 0x00000000 -#define EMAC_TMR1_DEFAULT 0x380f0000 -#endif /* CONFIG_440GP */ - -/* Revision specific EMAC register defaults */ -#ifdef CONFIG_IBM_EMAC4 -#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \ - EMAC_M1_OPB_CLK_83 | \ - EMAC_M1_TX_MWSW) -#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \ - EMAC_RMR_RFAF_128_2048) -#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \ - EMAC_TMR0_DEFAULT) -#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024 -#else /* !CONFIG_IBM_EMAC4 */ -#define EMAC_M1_DEFAULT EMAC_M1_BASE -#define EMAC_RMR_DEFAULT EMAC_RMR_BASE -#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0 -#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600 -#endif /* CONFIG_IBM_EMAC4 */ - -#endif +#define EMAC_RX_TAH_BAD_CSUM 0x0003 +#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \ + EMAC_RX_ST_RP | EMAC_RX_ST_SE | \ + EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \ + EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \ + EMAC_RX_ST_IRE ) +#endif /* __IBM_EMAC_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 14e9b6315f20..943fbd1546ff 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1,13 +1,14 @@ /* - * ibm_emac_core.c + * drivers/net/ibm_emac/ibm_emac_core.c * - * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC - * processors. - * - * (c) 2003 Benjamin Herrenschmidt + * Driver for PowerPC 4xx on-chip ethernet controller. * - * Based on original work by + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * + * Based on original work by + * Matt Porter + * (c) 2003 Benjamin Herrenschmidt * Armin Kuster * Johnnie Peters * @@ -15,29 +16,24 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * TODO - * - Check for races in the "remove" code path - * - Add some Power Management to the MAC and the PHY - * - Audit remaining of non-rewritten code (--BenH) - * - Cleanup message display using msglevel mecanism - * - Address all errata - * - Audit all register update paths to ensure they - * are being written post soft reset if required. + * */ + +#include #include #include #include #include -#include -#include #include -#include -#include #include #include #include #include -#include +#include +#include +#include +#include +#include #include #include #include @@ -45,1691 +41,1893 @@ #include #include #include -#include #include #include -#include -#include -#include -#include - #include "ibm_emac_core.h" - -//#define MDIO_DEBUG(fmt) printk fmt -#define MDIO_DEBUG(fmt) - -//#define LINK_DEBUG(fmt) printk fmt -#define LINK_DEBUG(fmt) - -//#define PKT_DEBUG(fmt) printk fmt -#define PKT_DEBUG(fmt) - -#define DRV_NAME "emac" -#define DRV_VERSION "2.0" -#define DRV_AUTHOR "Benjamin Herrenschmidt " -#define DRV_DESC "IBM EMAC Ethernet driver" +#include "ibm_emac_debug.h" /* - * When mdio_idx >= 0, contains a list of emac ocp_devs - * that have had their initialization deferred until the - * common MDIO controller has been initialized. + * Lack of dma_unmap_???? calls is intentional. + * + * API-correct usage requires additional support state information to be + * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to + * EMAC design (e.g. TX buffer passed from network stack can be split into + * several BDs, dma_map_single/dma_map_page can be used to map particular BD), + * maintaining such information will add additional overhead. + * Current DMA API implementation for 4xx processors only ensures cache coherency + * and dma_unmap_???? routines are empty and are likely to stay this way. + * I decided to omit dma_unmap_??? calls because I don't want to add additional + * complexity just for the sake of following some abstract API, when it doesn't + * add any real benefit to the driver. I understand that this decision maybe + * controversial, but I really tried to make code API-correct and efficient + * at the same time and didn't come up with code I liked :(. --ebs */ -LIST_HEAD(emac_init_list); -MODULE_AUTHOR(DRV_AUTHOR); +#define DRV_NAME "emac" +#define DRV_VERSION "3.53" +#define DRV_DESC "PPC 4xx OCP EMAC driver" + MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR + ("Eugene Surovegin or "); MODULE_LICENSE("GPL"); -static int skb_res = SKB_RES; -module_param(skb_res, int, 0444); -MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n" - "The 405 handles a misaligned IP header fine but\n" - "this can help if you are routing to a tunnel or a\n" - "device that needs aligned data. 0..2"); +/* minimum number of free TX descriptors required to wake up TX process */ +#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) -#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev)) - -static unsigned int rgmii_enable[] = { - RGMII_RTBI, - RGMII_RGMII, - RGMII_TBI, - RGMII_GMII -}; +/* If packet size is less than this number, we allocate small skb and copy packet + * contents into it instead of just sending original big skb up + */ +#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD -static unsigned int rgmii_speed_mask[] = { - RGMII_MII2_SPDMASK, - RGMII_MII3_SPDMASK -}; +/* Since multiple EMACs share MDIO lines in various ways, we need + * to avoid re-using the same PHY ID in cases where the arch didn't + * setup precise phy_map entries + */ +static u32 busy_phy_map; -static unsigned int rgmii_speed100[] = { - RGMII_MII2_100MB, - RGMII_MII3_100MB -}; +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP)) +/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us + * with PHY RX clock problem. + * 440EP has more sane SDR0_MFR register implementation than 440GX, which + * also allows controlling each EMAC clock + */ +static inline void EMAC_RX_CLK_TX(int idx) +{ + unsigned long flags; + local_irq_save(flags); -static unsigned int rgmii_speed1000[] = { - RGMII_MII2_1000MB, - RGMII_MII3_1000MB -}; +#if defined(CONFIG_405EP) + mtdcr(0xf3, mfdcr(0xf3) | (1 << idx)); +#else /* CONFIG_440EP */ + SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx)); +#endif -#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev)) + local_irq_restore(flags); +} -static unsigned int zmii_enable[][4] = { - {ZMII_SMII0, ZMII_RMII0, ZMII_MII0, - ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)}, - {ZMII_SMII1, ZMII_RMII1, ZMII_MII1, - ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)}, - {ZMII_SMII2, ZMII_RMII2, ZMII_MII2, - ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)}, - {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)} -}; +static inline void EMAC_RX_CLK_DEFAULT(int idx) +{ + unsigned long flags; + local_irq_save(flags); -static unsigned int mdi_enable[] = { - ZMII_MDI0, - ZMII_MDI1, - ZMII_MDI2, - ZMII_MDI3 -}; +#if defined(CONFIG_405EP) + mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx)); +#else /* CONFIG_440EP */ + SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx)); +#endif -static unsigned int zmii_speed = 0x0; -static unsigned int zmii_speed100[] = { - ZMII_MII0_100MB, - ZMII_MII1_100MB, - ZMII_MII2_100MB, - ZMII_MII3_100MB -}; + local_irq_restore(flags); +} +#else +#define EMAC_RX_CLK_TX(idx) ((void)0) +#define EMAC_RX_CLK_DEFAULT(idx) ((void)0) +#endif -/* Since multiple EMACs share MDIO lines in various ways, we need - * to avoid re-using the same PHY ID in cases where the arch didn't - * setup precise phy_map entries +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX) +/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS], + * unfortunately this is less flexible than 440EP case, because it's a global + * setting for all EMACs, therefore we do this clock trick only during probe. */ -static u32 busy_phy_map = 0; +#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \ + SDR_READ(DCRN_SDR_MFR) | 0x08000000) +#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \ + SDR_READ(DCRN_SDR_MFR) & ~0x08000000) +#else +#define EMAC_CLK_INTERNAL ((void)0) +#define EMAC_CLK_EXTERNAL ((void)0) +#endif -/* If EMACs share a common MDIO device, this points to it */ -static struct net_device *mdio_ndev = NULL; +/* I don't want to litter system log with timeout errors + * when we have brain-damaged PHY. + */ +static inline void emac_report_timeout_error(struct ocp_enet_private *dev, + const char *error) +{ +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) + DBG("%d: %s" NL, dev->def->index, error); +#else + if (net_ratelimit()) + printk(KERN_ERR "emac%d: %s\n", dev->def->index, error); +#endif +} -struct emac_def_dev { - struct list_head link; - struct ocp_device *ocpdev; - struct ibm_ocp_mal *mal; +/* PHY polling intervals */ +#define PHY_POLL_LINK_ON HZ +#define PHY_POLL_LINK_OFF (HZ / 5) + +/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ +static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { + "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", + "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", + "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", + "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", + "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", + "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", + "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", + "rx_bad_packet", "rx_runt_packet", "rx_short_event", + "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", + "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", + "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", + "tx_bd_excessive_collisions", "tx_bd_late_collision", + "tx_bd_multple_collisions", "tx_bd_single_collision", + "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", + "tx_errors" }; -static struct net_device_stats *emac_stats(struct net_device *dev) +static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs); +static void emac_clean_tx_ring(struct ocp_enet_private *dev); + +static inline int emac_phy_supports_gige(int phy_mode) { - struct ocp_enet_private *fep = dev->priv; - return &fep->stats; -}; + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} -static int -emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode) +static inline int emac_phy_gpcs(int phy_mode) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev); - const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" }; - int mode = -1; + return phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} - if (!rgmii) { - rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); +static inline void emac_tx_enable(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - if (rgmii == NULL) { - printk(KERN_ERR - "rgmii%d: Out of memory allocating RGMII structure!\n", - rgmii_dev->def->index); - return -ENOMEM; - } + local_irq_save(flags); - memset(rgmii, 0, sizeof(*rgmii)); + DBG("%d: tx_enable" NL, dev->def->index); - rgmii->base = - (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr, - sizeof(*rgmii->base)); - if (rgmii->base == NULL) { - printk(KERN_ERR - "rgmii%d: Cannot ioremap bridge registers!\n", - rgmii_dev->def->index); + r = in_be32(&p->mr0); + if (!(r & EMAC_MR0_TXE)) + out_be32(&p->mr0, r | EMAC_MR0_TXE); + local_irq_restore(flags); +} - kfree(rgmii); - return -ENOMEM; - } - ocp_set_drvdata(rgmii_dev, rgmii); - } +static void emac_tx_disable(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - if (phy_mode) { - switch (phy_mode) { - case PHY_MODE_GMII: - mode = GMII; - break; - case PHY_MODE_TBI: - mode = TBI; - break; - case PHY_MODE_RTBI: - mode = RTBI; - break; - case PHY_MODE_RGMII: - default: - mode = RGMII; - } - rgmii->base->fer &= ~RGMII_FER_MASK(input); - rgmii->base->fer |= rgmii_enable[mode] << (4 * input); - } else { - switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 * - input)) { - case RGMII_RTBI: - mode = RTBI; - break; - case RGMII_RGMII: - mode = RGMII; - break; - case RGMII_TBI: - mode = TBI; - break; - case RGMII_GMII: - mode = GMII; - } - } + local_irq_save(flags); - /* Set mode to RGMII if nothing valid is detected */ - if (mode < 0) - mode = RGMII; + DBG("%d: tx_disable" NL, dev->def->index); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_TXE) { + int n = 300; + out_be32(&p->mr0, r & ~EMAC_MR0_TXE); + while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) + --n; + if (unlikely(!n)) + emac_report_timeout_error(dev, "TX disable timeout"); + } + local_irq_restore(flags); +} - printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", - rgmii_dev->def->index, input, mode_name[mode]); +static void emac_rx_enable(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - rgmii->mode[input] = mode; - rgmii->users++; + local_irq_save(flags); + if (unlikely(dev->commac.rx_stopped)) + goto out; - return 0; + DBG("%d: rx_enable" NL, dev->def->index); + + r = in_be32(&p->mr0); + if (!(r & EMAC_MR0_RXE)) { + if (unlikely(!(r & EMAC_MR0_RXI))) { + /* Wait if previous async disable is still in progress */ + int n = 100; + while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) + --n; + if (unlikely(!n)) + emac_report_timeout_error(dev, + "RX disable timeout"); + } + out_be32(&p->mr0, r | EMAC_MR0_RXE); + } + out: + local_irq_restore(flags); } -static void -emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed) +static void emac_rx_disable(struct ocp_enet_private *dev) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev); - unsigned int rgmii_speed; - - rgmii_speed = in_be32(&rgmii->base->ssr); + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - rgmii_speed &= ~rgmii_speed_mask[input]; + local_irq_save(flags); - if (speed == 1000) - rgmii_speed |= rgmii_speed1000[input]; - else if (speed == 100) - rgmii_speed |= rgmii_speed100[input]; + DBG("%d: rx_disable" NL, dev->def->index); - out_be32(&rgmii->base->ssr, rgmii_speed); + r = in_be32(&p->mr0); + if (r & EMAC_MR0_RXE) { + int n = 300; + out_be32(&p->mr0, r & ~EMAC_MR0_RXE); + while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) + --n; + if (unlikely(!n)) + emac_report_timeout_error(dev, "RX disable timeout"); + } + local_irq_restore(flags); } -static void emac_close_rgmii(struct ocp_device *ocpdev) +static inline void emac_rx_disable_async(struct ocp_enet_private *dev) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev); - BUG_ON(!rgmii || rgmii->users == 0); + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - if (!--rgmii->users) { - ocp_set_drvdata(ocpdev, NULL); - iounmap((void *)rgmii->base); - kfree(rgmii); - } + local_irq_save(flags); + + DBG("%d: rx_disable_async" NL, dev->def->index); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_RXE) + out_be32(&p->mr0, r & ~EMAC_MR0_RXE); + local_irq_restore(flags); } -static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode) +static int emac_reset(struct ocp_enet_private *dev) { - struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev); - const char *mode_name[] = { "SMII", "RMII", "MII" }; - int mode = -1; + struct emac_regs *p = dev->emacp; + unsigned long flags; + int n = 20; - if (!zmii) { - zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); - if (zmii == NULL) { - printk(KERN_ERR - "zmii%d: Out of memory allocating ZMII structure!\n", - zmii_dev->def->index); - return -ENOMEM; - } - memset(zmii, 0, sizeof(*zmii)); + DBG("%d: reset" NL, dev->def->index); - zmii->base = - (struct zmii_regs *)ioremap(zmii_dev->def->paddr, - sizeof(*zmii->base)); - if (zmii->base == NULL) { - printk(KERN_ERR - "zmii%d: Cannot ioremap bridge registers!\n", - zmii_dev->def->index); + local_irq_save(flags); - kfree(zmii); - return -ENOMEM; - } - ocp_set_drvdata(zmii_dev, zmii); + if (!dev->reset_failed) { + /* 40x erratum suggests stopping RX channel before reset, + * we stop TX as well + */ + emac_rx_disable(dev); + emac_tx_disable(dev); } - if (phy_mode) { - switch (phy_mode) { - case PHY_MODE_MII: - mode = MII; - break; - case PHY_MODE_RMII: - mode = RMII; - break; - case PHY_MODE_SMII: - default: - mode = SMII; - } - zmii->base->fer &= ~ZMII_FER_MASK(input); - zmii->base->fer |= zmii_enable[input][mode]; + out_be32(&p->mr0, EMAC_MR0_SRST); + while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) + --n; + local_irq_restore(flags); + + if (n) { + dev->reset_failed = 0; + return 0; } else { - switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) { - case ZMII_MII0: - mode = MII; - break; - case ZMII_RMII0: - mode = RMII; - break; - case ZMII_SMII0: - mode = SMII; - } + emac_report_timeout_error(dev, "reset timeout"); + dev->reset_failed = 1; + return -ETIMEDOUT; } +} - /* Set mode to SMII if nothing valid is detected */ - if (mode < 0) - mode = SMII; +static void emac_hash_mc(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + u16 gaht[4] = { 0 }; + struct dev_mc_list *dmi; - printk(KERN_NOTICE "zmii%d: input %d in %s mode\n", - zmii_dev->def->index, input, mode_name[mode]); + DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count); - zmii->mode[input] = mode; - zmii->users++; + for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { + int bit; + DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL, + dev->def->index, + dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], + dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]); - return 0; + bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); + gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); + } + out_be32(&p->gaht1, gaht[0]); + out_be32(&p->gaht2, gaht[1]); + out_be32(&p->gaht3, gaht[2]); + out_be32(&p->gaht4, gaht[3]); } -static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input) +static inline u32 emac_iff2rmr(struct net_device *ndev) { - u32 mask; - struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); + u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE | + EMAC_RMR_BASE; + + if (ndev->flags & IFF_PROMISC) + r |= EMAC_RMR_PME; + else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) + r |= EMAC_RMR_PMME; + else if (ndev->mc_count > 0) + r |= EMAC_RMR_MAE; - mask = in_be32(&zmii->base->fer); - mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */ - mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input]; - out_be32(&zmii->base->fer, mask); + return r; } -static void -emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed) +static inline int emac_opb_mhz(void) { - struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); - - if (speed == 100) - zmii_speed |= zmii_speed100[input]; - else - zmii_speed &= ~zmii_speed100[input]; - - out_be32(&zmii->base->ssr, zmii_speed); + return (ocp_sys_info.opb_bus_freq + 500000) / 1000000; } -static void emac_close_zmii(struct ocp_device *ocpdev) +/* BHs disabled */ +static int emac_configure(struct ocp_enet_private *dev) { - struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); - BUG_ON(!zmii || zmii->users == 0); + struct emac_regs *p = dev->emacp; + struct net_device *ndev = dev->ndev; + int gige; + u32 r; - if (!--zmii->users) { - ocp_set_drvdata(ocpdev, NULL); - iounmap((void *)zmii->base); - kfree(zmii); - } -} + DBG("%d: configure" NL, dev->def->index); -int emac_phy_read(struct net_device *dev, int mii_id, int reg) -{ - int count; - uint32_t stacr; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; + if (emac_reset(dev) < 0) + return -ETIMEDOUT; - MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id, - reg)); + tah_reset(dev->tah_dev); - /* Enable proper ZMII port */ - if (fep->zmii_dev) - emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input); + /* Mode register */ + r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST; + if (dev->phy.duplex == DUPLEX_FULL) + r |= EMAC_MR1_FDE; + switch (dev->phy.speed) { + case SPEED_1000: + if (emac_phy_gpcs(dev->phy.mode)) { + r |= EMAC_MR1_MF_1000GPCS | + EMAC_MR1_MF_IPPA(dev->phy.address); - /* Use the EMAC that has the MDIO port */ - if (fep->mdio_dev) { - dev = fep->mdio_dev; - fep = dev->priv; - emacp = fep->emacp; + /* Put some arbitrary OUI, Manuf & Rev IDs so we can + * identify this GPCS PHY later. + */ + out_be32(&p->ipcr, 0xdeadbeef); + } else + r |= EMAC_MR1_MF_1000; + r |= EMAC_MR1_RFS_16K; + gige = 1; + + if (dev->ndev->mtu > ETH_DATA_LEN) + r |= EMAC_MR1_JPSM; + break; + case SPEED_100: + r |= EMAC_MR1_MF_100; + /* Fall through */ + default: + r |= EMAC_MR1_RFS_4K; + gige = 0; + break; } - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) - udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); + if (dev->rgmii_dev) + rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input, + dev->phy.speed); + else + zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed); - if ((stacr & EMAC_STACR_OC) == 0) { - printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name); - return -1; +#if !defined(CONFIG_40x) + /* on 40x erratum forces us to NOT use integrated flow control, + * let's hope it works on 44x ;) + */ + if (dev->phy.duplex == DUPLEX_FULL) { + if (dev->phy.pause) + r |= EMAC_MR1_EIFC | EMAC_MR1_APP; + else if (dev->phy.asym_pause) + r |= EMAC_MR1_APP; } +#endif + out_be32(&p->mr1, r); + + /* Set individual MAC address */ + out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); + out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | + (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | + ndev->dev_addr[5]); + + /* VLAN Tag Protocol ID */ + out_be32(&p->vtpid, 0x8100); + + /* Receive mode register */ + r = emac_iff2rmr(ndev); + if (r & EMAC_RMR_MAE) + emac_hash_mc(dev); + out_be32(&p->rmr, r); + + /* FIFOs thresholds */ + r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1, + EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE); + out_be32(&p->tmr1, r); + out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2)); + + /* PAUSE frame is sent when RX FIFO reaches its high-water mark, + there should be still enough space in FIFO to allow the our link + partner time to process this frame and also time to send PAUSE + frame itself. + + Here is the worst case scenario for the RX FIFO "headroom" + (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): + + 1) One maximum-length frame on TX 1522 bytes + 2) One PAUSE frame time 64 bytes + 3) PAUSE frame decode time allowance 64 bytes + 4) One maximum-length frame on RX 1522 bytes + 5) Round-trip propagation delay of the link (100Mb) 15 bytes + ---------- + 3187 bytes + + I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) + low-water mark to RX_FIFO_SIZE / 8 (512 bytes) + */ + r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE, + EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE); + out_be32(&p->rwmr, r); + + /* Set PAUSE timer to the maximum */ + out_be32(&p->ptr, 0xffff); + + /* IRQ sources */ + out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE | + EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | + EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | + EMAC_ISR_IRE | EMAC_ISR_TE); + + /* We need to take GPCS PHY out of isolate mode after EMAC reset */ + if (emac_phy_gpcs(dev->phy.mode)) + mii_reset_phy(&dev->phy); + + return 0; +} - /* Clear the speed bits and make a read request to the PHY */ - stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ); - stacr |= ((mii_id & 0x1F) << 5); +/* BHs disabled */ +static void emac_reinitialize(struct ocp_enet_private *dev) +{ + DBG("%d: reinitialize" NL, dev->def->index); - out_be32(&emacp->em0stacr, stacr); + if (!emac_configure(dev)) { + emac_tx_enable(dev); + emac_rx_enable(dev); + } +} - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) - udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); +/* BHs disabled */ +static void emac_full_tx_reset(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ocp_func_emac_data *emacdata = dev->def->additions; - if ((stacr & EMAC_STACR_OC) == 0) { - printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name); - return -1; - } + DBG("%d: full_tx_reset" NL, dev->def->index); - /* Check for a read error */ - if (stacr & EMAC_STACR_PHYE) { - MDIO_DEBUG(("EMAC MDIO PHY error !\n")); - return -1; - } + emac_tx_disable(dev); + mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); + emac_clean_tx_ring(dev); + dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; + + emac_configure(dev); - MDIO_DEBUG((" -> 0x%x\n", stacr >> 16)); + mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); + emac_tx_enable(dev); + emac_rx_enable(dev); - return (stacr >> 16); + netif_wake_queue(ndev); } -void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data) +static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) { - int count; - uint32_t stacr; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; + struct emac_regs *p = dev->emacp; + u32 r; + int n; - MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n", - dev->name, mii_id, reg, data)); + DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg); - /* Enable proper ZMII port */ - if (fep->zmii_dev) - emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input); + /* Enable proper MDIO port */ + zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); - /* Use the EMAC that has the MDIO port */ - if (fep->mdio_dev) { - dev = fep->mdio_dev; - fep = dev->priv; - emacp = fep->emacp; + /* Wait for management interface to become idle */ + n = 10; + while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + udelay(1); + if (!--n) + goto to; } - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) + /* Issue read command */ + out_be32(&p->stacr, + EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | + (reg & EMAC_STACR_PRA_MASK) + | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)); + + /* Wait for read to complete */ + n = 100; + while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) { udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); + if (!--n) + goto to; + } - if ((stacr & EMAC_STACR_OC) == 0) { - printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name); - return; + if (unlikely(r & EMAC_STACR_PHYE)) { + DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index, + id, reg); + return -EREMOTEIO; } - /* Clear the speed bits and make a read request to the PHY */ + r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); + DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r); + return r; + to: + DBG("%d: MII management interface timeout (read)" NL, dev->def->index); + return -ETIMEDOUT; +} + +static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, + u16 val) +{ + struct emac_regs *p = dev->emacp; + int n; - stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ); - stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16); + DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg, + val); - out_be32(&emacp->em0stacr, stacr); + /* Enable proper MDIO port */ + zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) + /* Wait for management interface to be idle */ + n = 10; + while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); + if (!--n) + goto to; + } - if ((stacr & EMAC_STACR_OC) == 0) - printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name); + /* Issue write command */ + out_be32(&p->stacr, + EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | + (reg & EMAC_STACR_PRA_MASK) | + ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | + (val << EMAC_STACR_PHYD_SHIFT)); - /* Check for a write error */ - if ((stacr & EMAC_STACR_PHYE) != 0) { - MDIO_DEBUG(("EMAC MDIO PHY error !\n")); + /* Wait for write to complete */ + n = 100; + while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + udelay(1); + if (!--n) + goto to; } + return; + to: + DBG("%d: MII management interface timeout (write)" NL, dev->def->index); } -static void emac_txeob_dev(void *param, u32 chanmask) +static int emac_mdio_read(struct net_device *ndev, int id, int reg) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; - unsigned long flags; - - spin_lock_irqsave(&fep->lock, flags); - - PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt)); - - while (fep->tx_cnt && - !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) { + struct ocp_enet_private *dev = ndev->priv; + int res; + + local_bh_disable(); + res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, + (u8) reg); + local_bh_enable(); + return res; +} - if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) { - /* Tell the system the transmit completed. */ - dma_unmap_single(&fep->ocpdev->dev, - fep->tx_desc[fep->ack_slot].data_ptr, - fep->tx_desc[fep->ack_slot].data_len, - DMA_TO_DEVICE); - dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]); +static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) +{ + struct ocp_enet_private *dev = ndev->priv; - if (fep->tx_desc[fep->ack_slot].ctrl & - (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC)) - fep->stats.collisions++; - } + local_bh_disable(); + __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, + (u8) reg, (u16) val); + local_bh_enable(); +} - fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL; - if (++fep->ack_slot == NUM_TX_BUFF) - fep->ack_slot = 0; +/* BHs disabled */ +static void emac_set_multicast_list(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct emac_regs *p = dev->emacp; + u32 rmr = emac_iff2rmr(ndev); + + DBG("%d: multicast %08x" NL, dev->def->index, rmr); + BUG_ON(!netif_running(dev->ndev)); + + /* I decided to relax register access rules here to avoid + * full EMAC reset. + * + * There is a real problem with EMAC4 core if we use MWSW_001 bit + * in MR1 register and do a full EMAC reset. + * One TX BD status update is delayed and, after EMAC reset, it + * never happens, resulting in TX hung (it'll be recovered by TX + * timeout handler eventually, but this is just gross). + * So we either have to do full TX reset or try to cheat here :) + * + * The only required change is to RX mode register, so I *think* all + * we need is just to stop RX channel. This seems to work on all + * tested SoCs. --ebs + */ + emac_rx_disable(dev); + if (rmr & EMAC_RMR_MAE) + emac_hash_mc(dev); + out_be32(&p->rmr, rmr); + emac_rx_enable(dev); +} - fep->tx_cnt--; +/* BHs disabled */ +static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu) +{ + struct ocp_func_emac_data *emacdata = dev->def->additions; + int rx_sync_size = emac_rx_sync_size(new_mtu); + int rx_skb_size = emac_rx_skb_size(new_mtu); + int i, ret = 0; + + emac_rx_disable(dev); + mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); + + if (dev->rx_sg_skb) { + ++dev->estats.rx_dropped_resize; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; } - if (fep->tx_cnt < NUM_TX_BUFF) - netif_wake_queue(dev); - PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt)); + /* Make a first pass over RX ring and mark BDs ready, dropping + * non-processed packets on the way. We need this as a separate pass + * to simplify error recovery in the case of allocation failure later. + */ + for (i = 0; i < NUM_RX_BUFF; ++i) { + if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) + ++dev->estats.rx_dropped_resize; - spin_unlock_irqrestore(&fep->lock, flags); -} + dev->rx_desc[i].data_len = 0; + dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | + (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + } -/* - Fill/Re-fill the rx chain with valid ctrl/ptrs. - This function will fill from rx_slot up to the parm end. - So to completely fill the chain pre-set rx_slot to 0 and - pass in an end of 0. - */ -static void emac_rx_fill(struct net_device *dev, int end) -{ - int i; - struct ocp_enet_private *fep = dev->priv; - - i = fep->rx_slot; - do { - /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb, - * it breaks our cache line alignement. However, we still allocate - * +16 so that we end up allocating the exact same size as - * dev_alloc_skb() would do. - * Also, because of the skb_res, the max DMA size we give to EMAC - * is slighly wrong, causing it to potentially DMA 2 more bytes - * from a broken/oversized packet. These 16 bytes will take care - * that we don't walk on somebody else toes with that. - */ - fep->rx_skb[i] = - alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC); - - if (fep->rx_skb[i] == NULL) { - /* Keep rx_slot here, the next time clean/fill is called - * we will try again before the MAL wraps back here - * If the MAL tries to use this descriptor with - * the EMPTY bit off it will cause the - * rxde interrupt. That is where we will - * try again to allocate an sk_buff. - */ - break; + /* Reallocate RX ring only if bigger skb buffers are required */ + if (rx_skb_size <= dev->rx_skb_size) + goto skip; + /* Second pass, allocate new skbs */ + for (i = 0; i < NUM_RX_BUFF; ++i) { + struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); + if (!skb) { + ret = -ENOMEM; + goto oom; } - if (skb_res) - skb_reserve(fep->rx_skb[i], skb_res); + BUG_ON(!dev->rx_skb[i]); + dev_kfree_skb(dev->rx_skb[i]); - /* We must NOT dma_map_single the cache line right after the - * buffer, so we must crop our sync size to account for the - * reserved space - */ - fep->rx_desc[i].data_ptr = - (unsigned char *)dma_map_single(&fep->ocpdev->dev, - (void *)fep->rx_skb[i]-> - data, - fep->rx_buffer_size - - skb_res, DMA_FROM_DEVICE); - - /* - * Some 4xx implementations use the previously - * reserved bits in data_len to encode the MS - * 4-bits of a 36-bit physical address (ERPN) - * This must be initialized. - */ - fep->rx_desc[i].data_len = 0; - fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR | - (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); + dev->rx_desc[i].data_ptr = + dma_map_single(dev->ldev, skb->data - 2, rx_sync_size, + DMA_FROM_DEVICE) + 2; + dev->rx_skb[i] = skb; + } + skip: + /* Check if we need to change "Jumbo" bit in MR1 */ + if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { + /* This is to prevent starting RX channel in emac_rx_enable() */ + dev->commac.rx_stopped = 1; + + dev->ndev->mtu = new_mtu; + emac_full_tx_reset(dev->ndev); + } - } while ((i = (i + 1) % NUM_RX_BUFF) != end); + mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu)); + oom: + /* Restart RX */ + dev->commac.rx_stopped = dev->rx_slot = 0; + mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); + emac_rx_enable(dev); - fep->rx_slot = i; + return ret; } -static void -emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb) +/* Process ctx, rtnl_lock semaphore */ +static int emac_change_mtu(struct net_device *ndev, int new_mtu) { - struct ocp_enet_private *fep = dev->priv; + struct ocp_enet_private *dev = ndev->priv; + int ret = 0; - /* Exit if interface has no TAH engine */ - if (!fep->tah_dev) { - skb->ip_summed = CHECKSUM_NONE; - return; - } + if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU) + return -EINVAL; - /* Check for TCP/UDP/IP csum error */ - if (ctrl & EMAC_CSUM_VER_ERROR) { - /* Let the stack verify checksum errors */ - skb->ip_summed = CHECKSUM_NONE; -/* adapter->hw_csum_err++; */ - } else { - /* Csum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; -/* adapter->hw_csum_good++; */ - } -} + DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu); -static int emac_rx_clean(struct net_device *dev) -{ - int i, b, bnum = 0, buf[6]; - int error, frame_length; - struct ocp_enet_private *fep = dev->priv; - unsigned short ctrl; + local_bh_disable(); + if (netif_running(ndev)) { + /* Check if we really need to reinitalize RX ring */ + if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) + ret = emac_resize_rx_ring(dev, new_mtu); + } - i = fep->rx_slot; + if (!ret) { + ndev->mtu = new_mtu; + dev->rx_skb_size = emac_rx_skb_size(new_mtu); + dev->rx_sync_size = emac_rx_sync_size(new_mtu); + } + local_bh_enable(); - PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot)); + return ret; +} - do { - if (fep->rx_skb[i] == NULL) - continue; /*we have already handled the packet but haved failed to alloc */ - /* - since rx_desc is in uncached mem we don't keep reading it directly - we pull out a local copy of ctrl and do the checks on the copy. - */ - ctrl = fep->rx_desc[i].ctrl; - if (ctrl & MAL_RX_CTRL_EMPTY) - break; /*we don't have any more ready packets */ - - if (EMAC_IS_BAD_RX_PACKET(ctrl)) { - fep->stats.rx_errors++; - fep->stats.rx_dropped++; - - if (ctrl & EMAC_RX_ST_OE) - fep->stats.rx_fifo_errors++; - if (ctrl & EMAC_RX_ST_AE) - fep->stats.rx_frame_errors++; - if (ctrl & EMAC_RX_ST_BFCS) - fep->stats.rx_crc_errors++; - if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL | - EMAC_RX_ST_ORE | EMAC_RX_ST_IRE)) - fep->stats.rx_length_errors++; - } else { - if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) == - (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) { - /* Single descriptor packet */ - emac_rx_csum(dev, ctrl, fep->rx_skb[i]); - /* Send the skb up the chain. */ - frame_length = fep->rx_desc[i].data_len - 4; - skb_put(fep->rx_skb[i], frame_length); - fep->rx_skb[i]->dev = dev; - fep->rx_skb[i]->protocol = - eth_type_trans(fep->rx_skb[i], dev); - error = netif_rx(fep->rx_skb[i]); - - if ((error == NET_RX_DROP) || - (error == NET_RX_BAD)) { - fep->stats.rx_dropped++; - } else { - fep->stats.rx_packets++; - fep->stats.rx_bytes += frame_length; - } - fep->rx_skb[i] = NULL; - } else { - /* Multiple descriptor packet */ - if (ctrl & MAL_RX_CTRL_FIRST) { - if (fep->rx_desc[(i + 1) % NUM_RX_BUFF]. - ctrl & MAL_RX_CTRL_EMPTY) - break; - bnum = 0; - buf[bnum] = i; - ++bnum; - continue; - } - if (((ctrl & MAL_RX_CTRL_FIRST) != - MAL_RX_CTRL_FIRST) && - ((ctrl & MAL_RX_CTRL_LAST) != - MAL_RX_CTRL_LAST)) { - if (fep->rx_desc[(i + 1) % - NUM_RX_BUFF].ctrl & - MAL_RX_CTRL_EMPTY) { - i = buf[0]; - break; - } - buf[bnum] = i; - ++bnum; - continue; - } - if (ctrl & MAL_RX_CTRL_LAST) { - buf[bnum] = i; - ++bnum; - skb_put(fep->rx_skb[buf[0]], - fep->rx_desc[buf[0]].data_len); - for (b = 1; b < bnum; b++) { - /* - * MAL is braindead, we need - * to copy the remainder - * of the packet from the - * latter descriptor buffers - * to the first skb. Then - * dispose of the source - * skbs. - * - * Once the stack is fixed - * to handle frags on most - * protocols we can generate - * a fragmented skb with - * no copies. - */ - memcpy(fep->rx_skb[buf[0]]-> - data + - fep->rx_skb[buf[0]]->len, - fep->rx_skb[buf[b]]-> - data, - fep->rx_desc[buf[b]]. - data_len); - skb_put(fep->rx_skb[buf[0]], - fep->rx_desc[buf[b]]. - data_len); - dma_unmap_single(&fep->ocpdev-> - dev, - fep-> - rx_desc[buf - [b]]. - data_ptr, - fep-> - rx_desc[buf - [b]]. - data_len, - DMA_FROM_DEVICE); - dev_kfree_skb(fep-> - rx_skb[buf[b]]); - } - emac_rx_csum(dev, ctrl, - fep->rx_skb[buf[0]]); - - fep->rx_skb[buf[0]]->dev = dev; - fep->rx_skb[buf[0]]->protocol = - eth_type_trans(fep->rx_skb[buf[0]], - dev); - error = netif_rx(fep->rx_skb[buf[0]]); - - if ((error == NET_RX_DROP) - || (error == NET_RX_BAD)) { - fep->stats.rx_dropped++; - } else { - fep->stats.rx_packets++; - fep->stats.rx_bytes += - fep->rx_skb[buf[0]]->len; - } - for (b = 0; b < bnum; b++) - fep->rx_skb[buf[b]] = NULL; - } - } +static void emac_clean_tx_ring(struct ocp_enet_private *dev) +{ + int i; + for (i = 0; i < NUM_TX_BUFF; ++i) { + if (dev->tx_skb[i]) { + dev_kfree_skb(dev->tx_skb[i]); + dev->tx_skb[i] = NULL; + if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) + ++dev->estats.tx_dropped; } - } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot); - - PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot)); - - return i; + dev->tx_desc[i].ctrl = 0; + dev->tx_desc[i].data_ptr = 0; + } } -static void emac_rxeob_dev(void *param, u32 chanmask) +static void emac_clean_rx_ring(struct ocp_enet_private *dev) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; - unsigned long flags; - int n; + int i; + for (i = 0; i < NUM_RX_BUFF; ++i) + if (dev->rx_skb[i]) { + dev->rx_desc[i].ctrl = 0; + dev_kfree_skb(dev->rx_skb[i]); + dev->rx_skb[i] = NULL; + dev->rx_desc[i].data_ptr = 0; + } - spin_lock_irqsave(&fep->lock, flags); - if ((n = emac_rx_clean(dev)) != fep->rx_slot) - emac_rx_fill(dev, n); - spin_unlock_irqrestore(&fep->lock, flags); + if (dev->rx_sg_skb) { + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } } -/* - * This interrupt should never occurr, we don't program - * the MAL for contiunous mode. - */ -static void emac_txde_dev(void *param, u32 chanmask) +static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot, + int flags) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; + struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); + if (unlikely(!skb)) + return -ENOMEM; - printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name); + dev->rx_skb[slot] = skb; + dev->rx_desc[slot].data_len = 0; - emac_mac_dump(dev); - emac_mal_dump(dev); + skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); + dev->rx_desc[slot].data_ptr = + dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, + DMA_FROM_DEVICE) + 2; + barrier(); + dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | + (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); - /* Reenable the transmit channel */ - mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + return 0; } -/* - * This interrupt should be very rare at best. This occurs when - * the hardware has a problem with the receive descriptors. The manual - * states that it occurs when the hardware cannot the receive descriptor - * empty bit is not set. The recovery mechanism will be to - * traverse through the descriptors, handle any that are marked to be - * handled and reinitialize each along the way. At that point the driver - * will be restarted. - */ -static void emac_rxde_dev(void *param, u32 chanmask) +static void emac_print_link_status(struct ocp_enet_private *dev) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; - unsigned long flags; - - if (net_ratelimit()) { - printk(KERN_WARNING "%s: receive descriptor error\n", - fep->ndev->name); + if (netif_carrier_ok(dev->ndev)) + printk(KERN_INFO "%s: link is up, %d %s%s\n", + dev->ndev->name, dev->phy.speed, + dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", + dev->phy.pause ? ", pause enabled" : + dev->phy.asym_pause ? ", assymetric pause enabled" : ""); + else + printk(KERN_INFO "%s: link is down\n", dev->ndev->name); +} - emac_mac_dump(dev); - emac_mal_dump(dev); - emac_desc_dump(dev); +/* Process ctx, rtnl_lock semaphore */ +static int emac_open(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ocp_func_emac_data *emacdata = dev->def->additions; + int err, i; + + DBG("%d: open" NL, dev->def->index); + + /* Setup error IRQ handler */ + err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev); + if (err) { + printk(KERN_ERR "%s: failed to request IRQ %d\n", + ndev->name, dev->def->irq); + return err; } - /* Disable RX channel */ - spin_lock_irqsave(&fep->lock, flags); - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - - /* For now, charge the error against all emacs */ - fep->stats.rx_errors++; - - /* so do we have any good packets still? */ - emac_rx_clean(dev); - - /* When the interface is restarted it resets processing to the - * first descriptor in the table. - */ - - fep->rx_slot = 0; - emac_rx_fill(dev, 0); + /* Allocate RX ring */ + for (i = 0; i < NUM_RX_BUFF; ++i) + if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { + printk(KERN_ERR "%s: failed to allocate RX ring\n", + ndev->name); + goto oom; + } - set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask); - set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask); + local_bh_disable(); + dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = + dev->commac.rx_stopped = 0; + dev->rx_sg_skb = NULL; + + if (dev->phy.address >= 0) { + int link_poll_interval; + if (dev->phy.def->ops->poll_link(&dev->phy)) { + dev->phy.def->ops->read_link(&dev->phy); + EMAC_RX_CLK_DEFAULT(dev->def->index); + netif_carrier_on(dev->ndev); + link_poll_interval = PHY_POLL_LINK_ON; + } else { + EMAC_RX_CLK_TX(dev->def->index); + netif_carrier_off(dev->ndev); + link_poll_interval = PHY_POLL_LINK_OFF; + } + mod_timer(&dev->link_timer, jiffies + link_poll_interval); + emac_print_link_status(dev); + } else + netif_carrier_on(dev->ndev); + + emac_configure(dev); + mal_poll_add(dev->mal, &dev->commac); + mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); + mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu)); + mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); + emac_tx_enable(dev); + emac_rx_enable(dev); + netif_start_queue(ndev); + local_bh_enable(); - /* Reenable the receive channels */ - mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - spin_unlock_irqrestore(&fep->lock, flags); + return 0; + oom: + emac_clean_rx_ring(dev); + free_irq(dev->def->irq, dev); + return -ENOMEM; } -static irqreturn_t -emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs) +/* BHs disabled */ +static int emac_link_differs(struct ocp_enet_private *dev) { - struct net_device *dev = dev_instance; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; - unsigned long tmp_em0isr; + u32 r = in_be32(&dev->emacp->mr1); - /* EMAC interrupt */ - tmp_em0isr = in_be32(&emacp->em0isr); - if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) { - /* This error is a hard transmit error - could retransmit */ - fep->stats.tx_errors++; + int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; + int speed, pause, asym_pause; - /* Reenable the transmit channel */ - mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS)) + speed = SPEED_1000; + else if (r & EMAC_MR1_MF_100) + speed = SPEED_100; + else + speed = SPEED_10; - } else { - fep->stats.rx_errors++; + switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { + case (EMAC_MR1_EIFC | EMAC_MR1_APP): + pause = 1; + asym_pause = 0; + break; + case EMAC_MR1_APP: + pause = 0; + asym_pause = 1; + break; + default: + pause = asym_pause = 0; } - - if (tmp_em0isr & EMAC_ISR_RP) - fep->stats.rx_length_errors++; - if (tmp_em0isr & EMAC_ISR_ALE) - fep->stats.rx_frame_errors++; - if (tmp_em0isr & EMAC_ISR_BFCS) - fep->stats.rx_crc_errors++; - if (tmp_em0isr & EMAC_ISR_PTLE) - fep->stats.rx_length_errors++; - if (tmp_em0isr & EMAC_ISR_ORE) - fep->stats.rx_length_errors++; - if (tmp_em0isr & EMAC_ISR_TE0) - fep->stats.tx_aborted_errors++; - - emac_err_dump(dev, tmp_em0isr); - - out_be32(&emacp->em0isr, tmp_em0isr); - - return IRQ_HANDLED; + return speed != dev->phy.speed || duplex != dev->phy.duplex || + pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; } -static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev) +/* BHs disabled */ +static void emac_link_timer(unsigned long data) { - unsigned short ctrl; - unsigned long flags; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; - int len = skb->len; - unsigned int offset = 0, size, f, tx_slot_first; - unsigned int nr_frags = skb_shinfo(skb)->nr_frags; - - spin_lock_irqsave(&fep->lock, flags); - - len -= skb->data_len; + struct ocp_enet_private *dev = (struct ocp_enet_private *)data; + int link_poll_interval; - if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) { - PKT_DEBUG(("emac_start_xmit() stopping queue\n")); - netif_stop_queue(dev); - spin_unlock_irqrestore(&fep->lock, flags); - return -EBUSY; - } + DBG2("%d: link timer" NL, dev->def->index); - tx_slot_first = fep->tx_slot; + if (dev->phy.def->ops->poll_link(&dev->phy)) { + if (!netif_carrier_ok(dev->ndev)) { + EMAC_RX_CLK_DEFAULT(dev->def->index); - while (len) { - size = min(len, DESC_BUF_SIZE); + /* Get new link parameters */ + dev->phy.def->ops->read_link(&dev->phy); - fep->tx_desc[fep->tx_slot].data_len = (short)size; - fep->tx_desc[fep->tx_slot].data_ptr = - (unsigned char *)dma_map_single(&fep->ocpdev->dev, - (void *)((unsigned int)skb-> - data + offset), - size, DMA_TO_DEVICE); + if (dev->tah_dev || emac_link_differs(dev)) + emac_full_tx_reset(dev->ndev); - ctrl = EMAC_TX_CTRL_DFLT; - if (fep->tx_slot != tx_slot_first) - ctrl |= MAL_TX_CTRL_READY; - if ((NUM_TX_BUFF - 1) == fep->tx_slot) - ctrl |= MAL_TX_CTRL_WRAP; - if (!nr_frags && (len == size)) { - ctrl |= MAL_TX_CTRL_LAST; - fep->tx_skb[fep->tx_slot] = skb; + netif_carrier_on(dev->ndev); + emac_print_link_status(dev); + } + link_poll_interval = PHY_POLL_LINK_ON; + } else { + if (netif_carrier_ok(dev->ndev)) { + EMAC_RX_CLK_TX(dev->def->index); +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) + emac_reinitialize(dev); +#endif + netif_carrier_off(dev->ndev); + emac_print_link_status(dev); } - if (skb->ip_summed == CHECKSUM_HW) - ctrl |= EMAC_TX_CTRL_TAH_CSUM; - - fep->tx_desc[fep->tx_slot].ctrl = ctrl; - - len -= size; - offset += size; - /* Bump tx count */ - if (++fep->tx_cnt == NUM_TX_BUFF) - netif_stop_queue(dev); + /* Retry reset if the previous attempt failed. + * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX + * case, but I left it here because it shouldn't trigger for + * sane PHYs anyway. + */ + if (unlikely(dev->reset_failed)) + emac_reinitialize(dev); - /* Next descriptor */ - if (++fep->tx_slot == NUM_TX_BUFF) - fep->tx_slot = 0; + link_poll_interval = PHY_POLL_LINK_OFF; } + mod_timer(&dev->link_timer, jiffies + link_poll_interval); +} - for (f = 0; f < nr_frags; f++) { - struct skb_frag_struct *frag; - - frag = &skb_shinfo(skb)->frags[f]; - len = frag->size; - offset = 0; - - while (len) { - size = min(len, DESC_BUF_SIZE); - - dma_map_page(&fep->ocpdev->dev, - frag->page, - frag->page_offset + offset, - size, DMA_TO_DEVICE); - - ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY; - if ((NUM_TX_BUFF - 1) == fep->tx_slot) - ctrl |= MAL_TX_CTRL_WRAP; - if ((f == (nr_frags - 1)) && (len == size)) { - ctrl |= MAL_TX_CTRL_LAST; - fep->tx_skb[fep->tx_slot] = skb; - } - - if (skb->ip_summed == CHECKSUM_HW) - ctrl |= EMAC_TX_CTRL_TAH_CSUM; - - fep->tx_desc[fep->tx_slot].data_len = (short)size; - fep->tx_desc[fep->tx_slot].data_ptr = - (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) + - frag->page_offset + offset); - fep->tx_desc[fep->tx_slot].ctrl = ctrl; - - len -= size; - offset += size; - - /* Bump tx count */ - if (++fep->tx_cnt == NUM_TX_BUFF) - netif_stop_queue(dev); +/* BHs disabled */ +static void emac_force_link_update(struct ocp_enet_private *dev) +{ + netif_carrier_off(dev->ndev); + if (timer_pending(&dev->link_timer)) + mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF); +} - /* Next descriptor */ - if (++fep->tx_slot == NUM_TX_BUFF) - fep->tx_slot = 0; - } - } +/* Process ctx, rtnl_lock semaphore */ +static int emac_close(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ocp_func_emac_data *emacdata = dev->def->additions; - /* - * Deferred set READY on first descriptor of packet to - * avoid TX MAL race. - */ - fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY; + DBG("%d: close" NL, dev->def->index); - /* Send the packet out. */ - out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT); + local_bh_disable(); - fep->stats.tx_packets++; - fep->stats.tx_bytes += skb->len; + if (dev->phy.address >= 0) + del_timer_sync(&dev->link_timer); - PKT_DEBUG(("emac_start_xmit() exitn")); + netif_stop_queue(ndev); + emac_rx_disable(dev); + emac_tx_disable(dev); + mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); + mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); + mal_poll_del(dev->mal, &dev->commac); + local_bh_enable(); - spin_unlock_irqrestore(&fep->lock, flags); + emac_clean_tx_ring(dev); + emac_clean_rx_ring(dev); + free_irq(dev->def->irq, dev); return 0; } -static int emac_adjust_to_link(struct ocp_enet_private *fep) +static inline u16 emac_tx_csum(struct ocp_enet_private *dev, + struct sk_buff *skb) { - emac_t *emacp = fep->emacp; - unsigned long mode_reg; - int full_duplex, speed; - - full_duplex = 0; - speed = SPEED_10; - - /* set mode register 1 defaults */ - mode_reg = EMAC_M1_DEFAULT; - - /* Read link mode on PHY */ - if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) { - /* If an error occurred, we don't deal with it yet */ - full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL); - speed = fep->phy_mii.speed; +#if defined(CONFIG_IBM_EMAC_TAH) + if (skb->ip_summed == CHECKSUM_HW) { + ++dev->stats.tx_packets_csum; + return EMAC_TX_CTRL_TAH_CSUM; } +#endif + return 0; +} +static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len) +{ + struct emac_regs *p = dev->emacp; + struct net_device *ndev = dev->ndev; - /* set speed (default is 10Mb) */ - switch (speed) { - case SPEED_1000: - mode_reg |= EMAC_M1_RFS_16K; - if (fep->rgmii_dev) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev); - - if ((rgmii->mode[fep->rgmii_input] == RTBI) - || (rgmii->mode[fep->rgmii_input] == TBI)) - mode_reg |= EMAC_M1_MF_1000GPCS; - else - mode_reg |= EMAC_M1_MF_1000MBPS; - - emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, - 1000); - } - break; - case SPEED_100: - mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K; - if (fep->rgmii_dev) - emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, - 100); - if (fep->zmii_dev) - emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input, - 100); - break; - case SPEED_10: - default: - mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K; - if (fep->rgmii_dev) - emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, - 10); - if (fep->zmii_dev) - emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input, - 10); - } - - if (full_duplex) - mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST; - else - mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE); + /* Send the packet out */ + out_be32(&p->tmr0, EMAC_TMR0_XMIT); - LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n", - fep->ndev->name, speed, full_duplex, fep->opened)); + if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { + netif_stop_queue(ndev); + DBG2("%d: stopped TX queue" NL, dev->def->index); + } - printk(KERN_INFO "%s: Speed: %d, %s duplex.\n", - fep->ndev->name, speed, full_duplex ? "Full" : "Half"); - if (fep->opened) - out_be32(&emacp->em0mr1, mode_reg); + ndev->trans_start = jiffies; + ++dev->stats.tx_packets; + dev->stats.tx_bytes += len; return 0; } -static int emac_set_mac_address(struct net_device *ndev, void *p) +/* BHs disabled */ +static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { - struct ocp_enet_private *fep = ndev->priv; - emac_t *emacp = fep->emacp; - struct sockaddr *addr = p; + struct ocp_enet_private *dev = ndev->priv; + unsigned int len = skb->len; + int slot; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; + u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | + MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); - memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + slot = dev->tx_slot++; + if (dev->tx_slot == NUM_TX_BUFF) { + dev->tx_slot = 0; + ctrl |= MAL_TX_CTRL_WRAP; + } - /* set the high address */ - out_be32(&emacp->em0iahr, - (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]); + DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot); - /* set the low address */ - out_be32(&emacp->em0ialr, - (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16) - | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]); + dev->tx_skb[slot] = skb; + dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len, + DMA_TO_DEVICE); + dev->tx_desc[slot].data_len = (u16) len; + barrier(); + dev->tx_desc[slot].ctrl = ctrl; - return 0; + return emac_xmit_finish(dev, len); } -static int emac_change_mtu(struct net_device *dev, int new_mtu) +#if defined(CONFIG_IBM_EMAC_TAH) +static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot, + u32 pd, int len, int last, u16 base_ctrl) { - struct ocp_enet_private *fep = dev->priv; - int old_mtu = dev->mtu; - unsigned long mode_reg; - emac_t *emacp = fep->emacp; - u32 em0mr0; - int i, full; - unsigned long flags; - - if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) { - printk(KERN_ERR - "emac: Invalid MTU setting, MTU must be between %d and %d\n", - EMAC_MIN_MTU, EMAC_MAX_MTU); - return -EINVAL; - } + while (1) { + u16 ctrl = base_ctrl; + int chunk = min(len, MAL_MAX_TX_SIZE); + len -= chunk; - if (old_mtu != new_mtu && netif_running(dev)) { - /* Stop rx engine */ - em0mr0 = in_be32(&emacp->em0mr0); - out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE); - - /* Wait for descriptors to be empty */ - do { - full = 0; - for (i = 0; i < NUM_RX_BUFF; i++) - if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) { - printk(KERN_NOTICE - "emac: RX ring is still full\n"); - full = 1; - } - } while (full); - - spin_lock_irqsave(&fep->lock, flags); - - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - - /* Destroy all old rx skbs */ - for (i = 0; i < NUM_RX_BUFF; i++) { - dma_unmap_single(&fep->ocpdev->dev, - fep->rx_desc[i].data_ptr, - fep->rx_desc[i].data_len, - DMA_FROM_DEVICE); - dev_kfree_skb(fep->rx_skb[i]); - fep->rx_skb[i] = NULL; - } + slot = (slot + 1) % NUM_TX_BUFF; - /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */ - mode_reg = in_be32(&emacp->em0mr1); - if (new_mtu > ENET_DEF_MTU_SIZE) { - mode_reg |= EMAC_M1_JUMBO_ENABLE; - fep->rx_buffer_size = EMAC_MAX_FRAME; - } else { - mode_reg &= ~EMAC_M1_JUMBO_ENABLE; - fep->rx_buffer_size = ENET_DEF_BUF_SIZE; - } - dev->mtu = new_mtu; - out_be32(&emacp->em0mr1, mode_reg); + if (last && !len) + ctrl |= MAL_TX_CTRL_LAST; + if (slot == NUM_TX_BUFF - 1) + ctrl |= MAL_TX_CTRL_WRAP; - /* Re-init rx skbs */ - fep->rx_slot = 0; - emac_rx_fill(dev, 0); + dev->tx_skb[slot] = NULL; + dev->tx_desc[slot].data_ptr = pd; + dev->tx_desc[slot].data_len = (u16) chunk; + dev->tx_desc[slot].ctrl = ctrl; + ++dev->tx_cnt; - /* Restart the rx engine */ - mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE); + if (!len) + break; - spin_unlock_irqrestore(&fep->lock, flags); + pd += chunk; } - - return 0; + return slot; } -static void __emac_set_multicast_list(struct net_device *dev) +/* BHs disabled (SG version for TAH equipped EMACs) */ +static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) { - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; - u32 rmr = in_be32(&emacp->em0rmr); - - /* First clear all special bits, they can be set later */ - rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE); + struct ocp_enet_private *dev = ndev->priv; + int nr_frags = skb_shinfo(skb)->nr_frags; + int len = skb->len, chunk; + int slot, i; + u16 ctrl; + u32 pd; - if (dev->flags & IFF_PROMISC) { - rmr |= EMAC_RMR_PME; - } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) { - /* - * Must be setting up to use multicast - * Now check for promiscuous multicast - */ - rmr |= EMAC_RMR_PMME; - } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) { - unsigned short em0gaht[4] = { 0, 0, 0, 0 }; - struct dev_mc_list *dmi; - - /* Need to hash on the multicast address. */ - for (dmi = dev->mc_list; dmi; dmi = dmi->next) { - unsigned long mc_crc; - unsigned int bit_number; - - mc_crc = ether_crc(6, (char *)dmi->dmi_addr); - bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */ - em0gaht[bit_number >> 4] |= - 0x8000 >> (bit_number & 0x0f); - } - emacp->em0gaht1 = em0gaht[0]; - emacp->em0gaht2 = em0gaht[1]; - emacp->em0gaht3 = em0gaht[2]; - emacp->em0gaht4 = em0gaht[3]; + /* This is common "fast" path */ + if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) + return emac_start_xmit(skb, ndev); - /* Turn on multicast addressing */ - rmr |= EMAC_RMR_MAE; - } - out_be32(&emacp->em0rmr, rmr); -} + len -= skb->data_len; -static int emac_init_tah(struct ocp_enet_private *fep) -{ - tah_t *tahp; + /* Note, this is only an *estimation*, we can still run out of empty + * slots because of the additional fragmentation into + * MAL_MAX_TX_SIZE-sized chunks + */ + if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) + goto stop_queue; + + ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | + emac_tx_csum(dev, skb); + slot = dev->tx_slot; + + /* skb data */ + dev->tx_skb[slot] = NULL; + chunk = min(len, MAL_MAX_TX_SIZE); + dev->tx_desc[slot].data_ptr = pd = + dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE); + dev->tx_desc[slot].data_len = (u16) chunk; + len -= chunk; + if (unlikely(len)) + slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, + ctrl); + /* skb fragments */ + for (i = 0; i < nr_frags; ++i) { + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + len = frag->size; - /* Initialize TAH and enable checksum verification */ - tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp)); + if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) + goto undo_frame; - if (tahp == NULL) { - printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n", - fep->tah_dev->def->index); + pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len, + DMA_TO_DEVICE); - return -ENOMEM; + slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, + ctrl); } - out_be32(&tahp->tah_mr, TAH_MR_SR); + DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len, + dev->tx_slot, slot); - /* wait for reset to complete */ - while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ; + /* Attach skb to the last slot so we don't release it too early */ + dev->tx_skb[slot] = skb; - /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ - out_be32(&tahp->tah_mr, - TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | - TAH_MR_DIG); + /* Send the packet out */ + if (dev->tx_slot == NUM_TX_BUFF - 1) + ctrl |= MAL_TX_CTRL_WRAP; + barrier(); + dev->tx_desc[dev->tx_slot].ctrl = ctrl; + dev->tx_slot = (slot + 1) % NUM_TX_BUFF; - iounmap(tahp); + return emac_xmit_finish(dev, skb->len); - return 0; + undo_frame: + /* Well, too bad. Our previous estimation was overly optimistic. + * Undo everything. + */ + while (slot != dev->tx_slot) { + dev->tx_desc[slot].ctrl = 0; + --dev->tx_cnt; + if (--slot < 0) + slot = NUM_TX_BUFF - 1; + } + ++dev->estats.tx_undo; + + stop_queue: + netif_stop_queue(ndev); + DBG2("%d: stopped TX queue" NL, dev->def->index); + return 1; +} +#else +# define emac_start_xmit_sg emac_start_xmit +#endif /* !defined(CONFIG_IBM_EMAC_TAH) */ + +/* BHs disabled */ +static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl) +{ + struct ibm_emac_error_stats *st = &dev->estats; + DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl); + + ++st->tx_bd_errors; + if (ctrl & EMAC_TX_ST_BFCS) + ++st->tx_bd_bad_fcs; + if (ctrl & EMAC_TX_ST_LCS) + ++st->tx_bd_carrier_loss; + if (ctrl & EMAC_TX_ST_ED) + ++st->tx_bd_excessive_deferral; + if (ctrl & EMAC_TX_ST_EC) + ++st->tx_bd_excessive_collisions; + if (ctrl & EMAC_TX_ST_LC) + ++st->tx_bd_late_collision; + if (ctrl & EMAC_TX_ST_MC) + ++st->tx_bd_multple_collisions; + if (ctrl & EMAC_TX_ST_SC) + ++st->tx_bd_single_collision; + if (ctrl & EMAC_TX_ST_UR) + ++st->tx_bd_underrun; + if (ctrl & EMAC_TX_ST_SQE) + ++st->tx_bd_sqe; } -static void emac_init_rings(struct net_device *dev) +static void emac_poll_tx(void *param) { - struct ocp_enet_private *ep = dev->priv; - int loop; + struct ocp_enet_private *dev = param; + DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt, + dev->ack_slot); + + if (dev->tx_cnt) { + u16 ctrl; + int slot = dev->ack_slot, n = 0; + again: + ctrl = dev->tx_desc[slot].ctrl; + if (!(ctrl & MAL_TX_CTRL_READY)) { + struct sk_buff *skb = dev->tx_skb[slot]; + ++n; + + if (skb) { + dev_kfree_skb(skb); + dev->tx_skb[slot] = NULL; + } + slot = (slot + 1) % NUM_TX_BUFF; - ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr + - (ep->mal_tx_chan * - MAL_DT_ALIGN)); - ep->rx_desc = - (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr + - (ep->mal_rx_chan * MAL_DT_ALIGN)); + if (unlikely(EMAC_IS_BAD_TX(ctrl))) + emac_parse_tx_error(dev, ctrl); - /* Fill in the transmit descriptor ring. */ - for (loop = 0; loop < NUM_TX_BUFF; loop++) { - if (ep->tx_skb[loop]) { - dma_unmap_single(&ep->ocpdev->dev, - ep->tx_desc[loop].data_ptr, - ep->tx_desc[loop].data_len, - DMA_TO_DEVICE); - dev_kfree_skb_irq(ep->tx_skb[loop]); + if (--dev->tx_cnt) + goto again; } - ep->tx_skb[loop] = NULL; - ep->tx_desc[loop].ctrl = 0; - ep->tx_desc[loop].data_len = 0; - ep->tx_desc[loop].data_ptr = NULL; - } - ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP; - - /* Format the receive descriptor ring. */ - ep->rx_slot = 0; - /* Default is MTU=1500 + Ethernet overhead */ - ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE; - emac_rx_fill(dev, 0); - if (ep->rx_slot != 0) { - printk(KERN_ERR - "%s: Not enough mem for RxChain durning Open?\n", - dev->name); - /*We couldn't fill the ring at startup? - *We could clean up and fail to open but right now we will try to - *carry on. It may be a sign of a bad NUM_RX_BUFF value - */ - } + if (n) { + dev->ack_slot = slot; + if (netif_queue_stopped(dev->ndev) && + dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) + netif_wake_queue(dev->ndev); - ep->tx_cnt = 0; - ep->tx_slot = 0; - ep->ack_slot = 0; + DBG2("%d: tx %d pkts" NL, dev->def->index, n); + } + } } -static void emac_reset_configure(struct ocp_enet_private *fep) +static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot, + int len) { - emac_t *emacp = fep->emacp; - int i; + struct sk_buff *skb = dev->rx_skb[slot]; + DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len); - mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask); - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + if (len) + dma_map_single(dev->ldev, skb->data - 2, + EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); - /* - * Check for a link, some PHYs don't provide a clock if - * no link is present. Some EMACs will not come out of - * soft reset without a PHY clock present. - */ - if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) { - /* Reset the EMAC */ - out_be32(&emacp->em0mr0, EMAC_M0_SRST); - udelay(20); - for (i = 0; i < 100; i++) { - if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0) - break; - udelay(10); - } + dev->rx_desc[slot].data_len = 0; + barrier(); + dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | + (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); +} + +static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl) +{ + struct ibm_emac_error_stats *st = &dev->estats; + DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl); + + ++st->rx_bd_errors; + if (ctrl & EMAC_RX_ST_OE) + ++st->rx_bd_overrun; + if (ctrl & EMAC_RX_ST_BP) + ++st->rx_bd_bad_packet; + if (ctrl & EMAC_RX_ST_RP) + ++st->rx_bd_runt_packet; + if (ctrl & EMAC_RX_ST_SE) + ++st->rx_bd_short_event; + if (ctrl & EMAC_RX_ST_AE) + ++st->rx_bd_alignment_error; + if (ctrl & EMAC_RX_ST_BFCS) + ++st->rx_bd_bad_fcs; + if (ctrl & EMAC_RX_ST_PTL) + ++st->rx_bd_packet_too_long; + if (ctrl & EMAC_RX_ST_ORE) + ++st->rx_bd_out_of_range; + if (ctrl & EMAC_RX_ST_IRE) + ++st->rx_bd_in_range; +} + +static inline void emac_rx_csum(struct ocp_enet_private *dev, + struct sk_buff *skb, u16 ctrl) +{ +#if defined(CONFIG_IBM_EMAC_TAH) + if (!ctrl && dev->tah_dev) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + ++dev->stats.rx_packets_csum; + } +#endif +} - if (i >= 100) { - printk(KERN_ERR "%s: Cannot reset EMAC\n", - fep->ndev->name); - return; +static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot) +{ + if (likely(dev->rx_sg_skb != NULL)) { + int len = dev->rx_desc[slot].data_len; + int tot_len = dev->rx_sg_skb->len + len; + + if (unlikely(tot_len + 2 > dev->rx_skb_size)) { + ++dev->estats.rx_dropped_mtu; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } else { + cacheable_memcpy(dev->rx_sg_skb->tail, + dev->rx_skb[slot]->data, len); + skb_put(dev->rx_sg_skb, len); + emac_recycle_rx_skb(dev, slot, len); + return 0; } } + emac_recycle_rx_skb(dev, slot, 0); + return -1; +} - /* Switch IRQs off for now */ - out_be32(&emacp->em0iser, 0); +/* BHs disabled */ +static int emac_poll_rx(void *param, int budget) +{ + struct ocp_enet_private *dev = param; + int slot = dev->rx_slot, received = 0; + + DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget); - /* Configure MAL rx channel */ - mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG); + again: + while (budget > 0) { + int len; + struct sk_buff *skb; + u16 ctrl = dev->rx_desc[slot].ctrl; + + if (ctrl & MAL_RX_CTRL_EMPTY) + break; - /* set the high address */ - out_be32(&emacp->em0iahr, - (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]); + skb = dev->rx_skb[slot]; + barrier(); + len = dev->rx_desc[slot].data_len; - /* set the low address */ - out_be32(&emacp->em0ialr, - (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16) - | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]); + if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) + goto sg; - /* Adjust to link */ - if (netif_carrier_ok(fep->ndev)) - emac_adjust_to_link(fep); + ctrl &= EMAC_BAD_RX_MASK; + if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { + emac_parse_rx_error(dev, ctrl); + ++dev->estats.rx_dropped_error; + emac_recycle_rx_skb(dev, slot, 0); + len = 0; + goto next; + } - /* enable broadcast/individual address and RX FIFO defaults */ - out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT); + if (len && len < EMAC_RX_COPY_THRESH) { + struct sk_buff *copy_skb = + alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); + if (unlikely(!copy_skb)) + goto oom; + + skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); + cacheable_memcpy(copy_skb->data - 2, skb->data - 2, + len + 2); + emac_recycle_rx_skb(dev, slot, len); + skb = copy_skb; + } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) + goto oom; + + skb_put(skb, len); + push_packet: + skb->dev = dev->ndev; + skb->protocol = eth_type_trans(skb, dev->ndev); + emac_rx_csum(dev, skb, ctrl); + + if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) + ++dev->estats.rx_dropped_stack; + next: + ++dev->stats.rx_packets; + skip: + dev->stats.rx_bytes += len; + slot = (slot + 1) % NUM_RX_BUFF; + --budget; + ++received; + continue; + sg: + if (ctrl & MAL_RX_CTRL_FIRST) { + BUG_ON(dev->rx_sg_skb); + if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { + DBG("%d: rx OOM %d" NL, dev->def->index, slot); + ++dev->estats.rx_dropped_oom; + emac_recycle_rx_skb(dev, slot, 0); + } else { + dev->rx_sg_skb = skb; + skb_put(skb, len); + } + } else if (!emac_rx_sg_append(dev, slot) && + (ctrl & MAL_RX_CTRL_LAST)) { + + skb = dev->rx_sg_skb; + dev->rx_sg_skb = NULL; + + ctrl &= EMAC_BAD_RX_MASK; + if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { + emac_parse_rx_error(dev, ctrl); + ++dev->estats.rx_dropped_error; + dev_kfree_skb(skb); + len = 0; + } else + goto push_packet; + } + goto skip; + oom: + DBG("%d: rx OOM %d" NL, dev->def->index, slot); + /* Drop the packet and recycle skb */ + ++dev->estats.rx_dropped_oom; + emac_recycle_rx_skb(dev, slot, 0); + goto next; + } - /* set transmit request threshold register */ - out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT); + if (received) { + DBG2("%d: rx %d BDs" NL, dev->def->index, received); + dev->rx_slot = slot; + } - /* Reconfigure multicast */ - __emac_set_multicast_list(fep->ndev); + if (unlikely(budget && dev->commac.rx_stopped)) { + struct ocp_func_emac_data *emacdata = dev->def->additions; - /* Set receiver/transmitter defaults */ - out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT); - out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT); - out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT); + barrier(); + if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { + DBG2("%d: rx restart" NL, dev->def->index); + received = 0; + goto again; + } - /* set frame gap */ - out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP); - - /* set VLAN Tag Protocol Identifier */ - out_be32(&emacp->em0vtpid, 0x8100); + if (dev->rx_sg_skb) { + DBG2("%d: dropping partial rx packet" NL, + dev->def->index); + ++dev->estats.rx_dropped_error; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } - /* Init ring buffers */ - emac_init_rings(fep->ndev); + dev->commac.rx_stopped = 0; + mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); + emac_rx_enable(dev); + dev->rx_slot = 0; + } + return received; } -static void emac_kick(struct ocp_enet_private *fep) +/* BHs disabled */ +static int emac_peek_rx(void *param) { - emac_t *emacp = fep->emacp; - unsigned long emac_ier; - - emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP | - EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE | - EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; + struct ocp_enet_private *dev = param; + return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); +} - out_be32(&emacp->em0iser, emac_ier); +/* BHs disabled */ +static int emac_peek_rx_sg(void *param) +{ + struct ocp_enet_private *dev = param; + int slot = dev->rx_slot; + while (1) { + u16 ctrl = dev->rx_desc[slot].ctrl; + if (ctrl & MAL_RX_CTRL_EMPTY) + return 0; + else if (ctrl & MAL_RX_CTRL_LAST) + return 1; - /* enable all MAL transmit and receive channels */ - mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); - mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + slot = (slot + 1) % NUM_RX_BUFF; - /* set transmit and receive enable */ - out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE); + /* I'm just being paranoid here :) */ + if (unlikely(slot == dev->rx_slot)) + return 0; + } } -static void -emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep) +/* Hard IRQ */ +static void emac_rxde(void *param) { - u32 advertise; - int autoneg; - int forced_speed; - int forced_duplex; + struct ocp_enet_private *dev = param; + ++dev->estats.rx_stopped; + emac_rx_disable_async(dev); +} - /* Default advertise */ - advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full; - autoneg = fep->want_autoneg; - forced_speed = fep->phy_mii.speed; - forced_duplex = fep->phy_mii.duplex; +/* Hard IRQ */ +static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ocp_enet_private *dev = dev_instance; + struct emac_regs *p = dev->emacp; + struct ibm_emac_error_stats *st = &dev->estats; + + u32 isr = in_be32(&p->isr); + out_be32(&p->isr, isr); + + DBG("%d: isr = %08x" NL, dev->def->index, isr); + + if (isr & EMAC_ISR_TXPE) + ++st->tx_parity; + if (isr & EMAC_ISR_RXPE) + ++st->rx_parity; + if (isr & EMAC_ISR_TXUE) + ++st->tx_underrun; + if (isr & EMAC_ISR_RXOE) + ++st->rx_fifo_overrun; + if (isr & EMAC_ISR_OVR) + ++st->rx_overrun; + if (isr & EMAC_ISR_BP) + ++st->rx_bad_packet; + if (isr & EMAC_ISR_RP) + ++st->rx_runt_packet; + if (isr & EMAC_ISR_SE) + ++st->rx_short_event; + if (isr & EMAC_ISR_ALE) + ++st->rx_alignment_error; + if (isr & EMAC_ISR_BFCS) + ++st->rx_bad_fcs; + if (isr & EMAC_ISR_PTLE) + ++st->rx_packet_too_long; + if (isr & EMAC_ISR_ORE) + ++st->rx_out_of_range; + if (isr & EMAC_ISR_IRE) + ++st->rx_in_range; + if (isr & EMAC_ISR_SQE) + ++st->tx_sqe; + if (isr & EMAC_ISR_TE) + ++st->tx_errors; - /* Setup link parameters */ - if (ep) { - if (ep->autoneg == AUTONEG_ENABLE) { - advertise = ep->advertising; - autoneg = 1; - } else { - autoneg = 0; - forced_speed = ep->speed; - forced_duplex = ep->duplex; - } - } + return IRQ_HANDLED; +} - /* Configure PHY & start aneg */ - fep->want_autoneg = autoneg; - if (autoneg) { - LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n", - fep->ndev->name, advertise)); - fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise); - } else { - LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n", - fep->ndev->name, forced_speed, forced_duplex)); - fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed, - forced_duplex); - } - fep->timer_ticks = 0; - mod_timer(&fep->link_timer, jiffies + HZ); +static struct net_device_stats *emac_stats(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ibm_emac_stats *st = &dev->stats; + struct ibm_emac_error_stats *est = &dev->estats; + struct net_device_stats *nst = &dev->nstats; + + DBG2("%d: stats" NL, dev->def->index); + + /* Compute "legacy" statistics */ + local_irq_disable(); + nst->rx_packets = (unsigned long)st->rx_packets; + nst->rx_bytes = (unsigned long)st->rx_bytes; + nst->tx_packets = (unsigned long)st->tx_packets; + nst->tx_bytes = (unsigned long)st->tx_bytes; + nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + + est->rx_dropped_error + + est->rx_dropped_resize + + est->rx_dropped_mtu); + nst->tx_dropped = (unsigned long)est->tx_dropped; + + nst->rx_errors = (unsigned long)est->rx_bd_errors; + nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + + est->rx_fifo_overrun + + est->rx_overrun); + nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + + est->rx_alignment_error); + nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + + est->rx_bad_fcs); + nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + + est->rx_bd_short_event + + est->rx_bd_packet_too_long + + est->rx_bd_out_of_range + + est->rx_bd_in_range + + est->rx_runt_packet + + est->rx_short_event + + est->rx_packet_too_long + + est->rx_out_of_range + + est->rx_in_range); + + nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); + nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + + est->tx_underrun); + nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; + nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + + est->tx_bd_excessive_collisions + + est->tx_bd_late_collision + + est->tx_bd_multple_collisions); + local_irq_enable(); + return nst; } -static void emac_link_timer(unsigned long data) +static void emac_remove(struct ocp_device *ocpdev) { - struct ocp_enet_private *fep = (struct ocp_enet_private *)data; - int link; + struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev); - if (fep->going_away) - return; + DBG("%d: remove" NL, dev->def->index); - spin_lock_irq(&fep->lock); + ocp_set_drvdata(ocpdev, 0); + unregister_netdev(dev->ndev); - link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii); - LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link)); + tah_fini(dev->tah_dev); + rgmii_fini(dev->rgmii_dev, dev->rgmii_input); + zmii_fini(dev->zmii_dev, dev->zmii_input); - if (link == netif_carrier_ok(fep->ndev)) { - if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10) - emac_start_link(fep, NULL); - goto out; - } - printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name, - link ? "Up" : "Down"); - if (link) { - netif_carrier_on(fep->ndev); - /* Chip needs a full reset on config change. That sucks, so I - * should ultimately move that to some tasklet to limit - * latency peaks caused by this code - */ - emac_reset_configure(fep); - if (fep->opened) - emac_kick(fep); - } else { - fep->timer_ticks = 0; - netif_carrier_off(fep->ndev); - } - out: - mod_timer(&fep->link_timer, jiffies + HZ); - spin_unlock_irq(&fep->lock); + emac_dbg_register(dev->def->index, 0); + + mal_unregister_commac(dev->mal, &dev->commac); + iounmap((void *)dev->emacp); + kfree(dev->ndev); } -static void emac_set_multicast_list(struct net_device *dev) -{ - struct ocp_enet_private *fep = dev->priv; +static struct mal_commac_ops emac_commac_ops = { + .poll_tx = &emac_poll_tx, + .poll_rx = &emac_poll_rx, + .peek_rx = &emac_peek_rx, + .rxde = &emac_rxde, +}; - spin_lock_irq(&fep->lock); - __emac_set_multicast_list(dev); - spin_unlock_irq(&fep->lock); -} +static struct mal_commac_ops emac_commac_sg_ops = { + .poll_tx = &emac_poll_tx, + .poll_rx = &emac_poll_rx, + .peek_rx = &emac_peek_rx_sg, + .rxde = &emac_rxde, +}; -static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +/* Ethtool support */ +static int emac_ethtool_get_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) { - struct ocp_enet_private *fep = ndev->priv; + struct ocp_enet_private *dev = ndev->priv; - cmd->supported = fep->phy_mii.def->features; + cmd->supported = dev->phy.features; cmd->port = PORT_MII; - cmd->transceiver = XCVR_EXTERNAL; - cmd->phy_address = fep->mii_phy_addr; - spin_lock_irq(&fep->lock); - cmd->autoneg = fep->want_autoneg; - cmd->speed = fep->phy_mii.speed; - cmd->duplex = fep->phy_mii.duplex; - spin_unlock_irq(&fep->lock); + cmd->phy_address = dev->phy.address; + cmd->transceiver = + dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; + + local_bh_disable(); + cmd->advertising = dev->phy.advertising; + cmd->autoneg = dev->phy.autoneg; + cmd->speed = dev->phy.speed; + cmd->duplex = dev->phy.duplex; + local_bh_enable(); + return 0; } -static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +static int emac_ethtool_set_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) { - struct ocp_enet_private *fep = ndev->priv; - unsigned long features = fep->phy_mii.def->features; + struct ocp_enet_private *dev = ndev->priv; + u32 f = dev->phy.features; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; + DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index, + cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); + /* Basic sanity checks */ + if (dev->phy.address < 0) + return -EOPNOTSUPP; if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) return -EINVAL; if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) return -EINVAL; if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) return -EINVAL; - if (cmd->autoneg == AUTONEG_DISABLE) + + if (cmd->autoneg == AUTONEG_DISABLE) { switch (cmd->speed) { case SPEED_10: - if (cmd->duplex == DUPLEX_HALF && - (features & SUPPORTED_10baseT_Half) == 0) + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_10baseT_Half)) return -EINVAL; - if (cmd->duplex == DUPLEX_FULL && - (features & SUPPORTED_10baseT_Full) == 0) + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_10baseT_Full)) return -EINVAL; break; case SPEED_100: - if (cmd->duplex == DUPLEX_HALF && - (features & SUPPORTED_100baseT_Half) == 0) + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_100baseT_Half)) return -EINVAL; - if (cmd->duplex == DUPLEX_FULL && - (features & SUPPORTED_100baseT_Full) == 0) + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_100baseT_Full)) return -EINVAL; break; case SPEED_1000: - if (cmd->duplex == DUPLEX_HALF && - (features & SUPPORTED_1000baseT_Half) == 0) + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_1000baseT_Half)) return -EINVAL; - if (cmd->duplex == DUPLEX_FULL && - (features & SUPPORTED_1000baseT_Full) == 0) + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_1000baseT_Full)) return -EINVAL; break; default: return -EINVAL; - } else if ((features & SUPPORTED_Autoneg) == 0) - return -EINVAL; - spin_lock_irq(&fep->lock); - emac_start_link(fep, cmd); - spin_unlock_irq(&fep->lock); + } + + local_bh_disable(); + dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, + cmd->duplex); + + } else { + if (!(f & SUPPORTED_Autoneg)) + return -EINVAL; + + local_bh_disable(); + dev->phy.def->ops->setup_aneg(&dev->phy, + (cmd->advertising & f) | + (dev->phy.advertising & + (ADVERTISED_Pause | + ADVERTISED_Asym_Pause))); + } + emac_force_link_update(dev); + local_bh_enable(); + return 0; } -static void -emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) +static void emac_ethtool_get_ringparam(struct net_device *ndev, + struct ethtool_ringparam *rp) { - struct ocp_enet_private *fep = ndev->priv; - - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index); - info->regdump_len = 0; + rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; + rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; } -static int emac_nway_reset(struct net_device *ndev) +static void emac_ethtool_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pp) { - struct ocp_enet_private *fep = ndev->priv; + struct ocp_enet_private *dev = ndev->priv; + + local_bh_disable(); + if ((dev->phy.features & SUPPORTED_Autoneg) && + (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) + pp->autoneg = 1; + + if (dev->phy.duplex == DUPLEX_FULL) { + if (dev->phy.pause) + pp->rx_pause = pp->tx_pause = 1; + else if (dev->phy.asym_pause) + pp->tx_pause = 1; + } + local_bh_enable(); +} - if (!fep->want_autoneg) - return -EINVAL; - spin_lock_irq(&fep->lock); - emac_start_link(fep, NULL); - spin_unlock_irq(&fep->lock); - return 0; +static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + return dev->tah_dev != 0; } -static u32 emac_get_link(struct net_device *ndev) +static int emac_get_regs_len(struct ocp_enet_private *dev) { - return netif_carrier_ok(ndev); + return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE; } -static struct ethtool_ops emac_ethtool_ops = { - .get_settings = emac_get_settings, - .set_settings = emac_set_settings, - .get_drvinfo = emac_get_drvinfo, - .nway_reset = emac_nway_reset, - .get_link = emac_get_link -}; +static int emac_ethtool_get_regs_len(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + return sizeof(struct emac_ethtool_regs_hdr) + + emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) + + zmii_get_regs_len(dev->zmii_dev) + + rgmii_get_regs_len(dev->rgmii_dev) + + tah_get_regs_len(dev->tah_dev); +} -static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf) { - struct ocp_enet_private *fep = dev->priv; - uint16_t *data = (uint16_t *) & rq->ifr_ifru; + struct emac_ethtool_regs_subhdr *hdr = buf; - switch (cmd) { - case SIOCGMIIPHY: - data[0] = fep->mii_phy_addr; - /* Fall through */ - case SIOCGMIIREG: - data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]); - return 0; - case SIOCSMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; + hdr->version = EMAC_ETHTOOL_REGS_VER; + hdr->index = dev->def->index; + memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); + return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); +} - emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]); - return 0; - default: - return -EOPNOTSUPP; +static void emac_ethtool_get_regs(struct net_device *ndev, + struct ethtool_regs *regs, void *buf) +{ + struct ocp_enet_private *dev = ndev->priv; + struct emac_ethtool_regs_hdr *hdr = buf; + + hdr->components = 0; + buf = hdr + 1; + + local_irq_disable(); + buf = mal_dump_regs(dev->mal, buf); + buf = emac_dump_regs(dev, buf); + if (dev->zmii_dev) { + hdr->components |= EMAC_ETHTOOL_REGS_ZMII; + buf = zmii_dump_regs(dev->zmii_dev, buf); + } + if (dev->rgmii_dev) { + hdr->components |= EMAC_ETHTOOL_REGS_RGMII; + buf = rgmii_dump_regs(dev->rgmii_dev, buf); } + if (dev->tah_dev) { + hdr->components |= EMAC_ETHTOOL_REGS_TAH; + buf = tah_dump_regs(dev->tah_dev, buf); + } + local_irq_enable(); } -static int emac_open(struct net_device *dev) +static int emac_ethtool_nway_reset(struct net_device *ndev) { - struct ocp_enet_private *fep = dev->priv; - int rc; + struct ocp_enet_private *dev = ndev->priv; + int res = 0; - spin_lock_irq(&fep->lock); + DBG("%d: nway_reset" NL, dev->def->index); - fep->opened = 1; - netif_carrier_off(dev); + if (dev->phy.address < 0) + return -EOPNOTSUPP; - /* Reset & configure the chip */ - emac_reset_configure(fep); + local_bh_disable(); + if (!dev->phy.autoneg) { + res = -EINVAL; + goto out; + } - spin_unlock_irq(&fep->lock); + dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); + emac_force_link_update(dev); - /* Request our interrupt lines */ - rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev); - if (rc != 0) { - printk("dev->irq %d failed\n", dev->irq); - goto bail; - } - /* Kick the chip rx & tx channels into life */ - spin_lock_irq(&fep->lock); - emac_kick(fep); - spin_unlock_irq(&fep->lock); + out: + local_bh_enable(); + return res; +} - netif_start_queue(dev); - bail: - return rc; +static int emac_ethtool_get_stats_count(struct net_device *ndev) +{ + return EMAC_ETHTOOL_STATS_COUNT; } -static int emac_close(struct net_device *dev) +static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, + u8 * buf) { - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; + if (stringset == ETH_SS_STATS) + memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); +} - /* XXX Stop IRQ emitting here */ - spin_lock_irq(&fep->lock); - fep->opened = 0; - mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask); - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - netif_carrier_off(dev); - netif_stop_queue(dev); +static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, + struct ethtool_stats *estats, + u64 * tmp_stats) +{ + struct ocp_enet_private *dev = ndev->priv; + local_irq_disable(); + memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); + tmp_stats += sizeof(dev->stats) / sizeof(u64); + memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); + local_irq_enable(); +} - /* - * Check for a link, some PHYs don't provide a clock if - * no link is present. Some EMACs will not come out of - * soft reset without a PHY clock present. - */ - if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) { - out_be32(&emacp->em0mr0, EMAC_M0_SRST); - udelay(10); +static void emac_ethtool_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + struct ocp_enet_private *dev = ndev->priv; - if (emacp->em0mr0 & EMAC_M0_SRST) { - /*not sure what to do here hopefully it clears before another open */ - printk(KERN_ERR - "%s: Phy SoftReset didn't clear, no link?\n", - dev->name); - } - } + strcpy(info->driver, "ibm_emac"); + strcpy(info->version, DRV_VERSION); + info->fw_version[0] = '\0'; + sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index); + info->n_stats = emac_ethtool_get_stats_count(ndev); + info->regdump_len = emac_ethtool_get_regs_len(ndev); +} - /* Free the irq's */ - free_irq(dev->irq, dev); +static struct ethtool_ops emac_ethtool_ops = { + .get_settings = emac_ethtool_get_settings, + .set_settings = emac_ethtool_set_settings, + .get_drvinfo = emac_ethtool_get_drvinfo, - spin_unlock_irq(&fep->lock); + .get_regs_len = emac_ethtool_get_regs_len, + .get_regs = emac_ethtool_get_regs, - return 0; -} + .nway_reset = emac_ethtool_nway_reset, -static void emac_remove(struct ocp_device *ocpdev) -{ - struct net_device *dev = ocp_get_drvdata(ocpdev); - struct ocp_enet_private *ep = dev->priv; - - /* FIXME: locking, races, ... */ - ep->going_away = 1; - ocp_set_drvdata(ocpdev, NULL); - if (ep->rgmii_dev) - emac_close_rgmii(ep->rgmii_dev); - if (ep->zmii_dev) - emac_close_zmii(ep->zmii_dev); - - unregister_netdev(dev); - del_timer_sync(&ep->link_timer); - mal_unregister_commac(ep->mal, &ep->commac); - iounmap((void *)ep->emacp); - kfree(dev); -} - -struct mal_commac_ops emac_commac_ops = { - .txeob = &emac_txeob_dev, - .txde = &emac_txde_dev, - .rxeob = &emac_rxeob_dev, - .rxde = &emac_rxde_dev, + .get_ringparam = emac_ethtool_get_ringparam, + .get_pauseparam = emac_ethtool_get_pauseparam, + + .get_rx_csum = emac_ethtool_get_rx_csum, + + .get_strings = emac_ethtool_get_strings, + .get_stats_count = emac_ethtool_get_stats_count, + .get_ethtool_stats = emac_ethtool_get_ethtool_stats, + + .get_link = ethtool_op_get_link, + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, }; -#ifdef CONFIG_NET_POLL_CONTROLLER -static void emac_netpoll(struct net_device *ndev) +static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) { - emac_rxeob_dev((void *)ndev, 0); - emac_txeob_dev((void *)ndev, 0); + struct ocp_enet_private *dev = ndev->priv; + uint16_t *data = (uint16_t *) & rq->ifr_ifru; + + DBG("%d: ioctl %08x" NL, dev->def->index, cmd); + + if (dev->phy.address < 0) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCDEVPRIVATE: + data[0] = dev->phy.address; + /* Fall through */ + case SIOCGMIIREG: + case SIOCDEVPRIVATE + 1: + data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); + return 0; + + case SIOCSMIIREG: + case SIOCDEVPRIVATE + 2: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); + return 0; + default: + return -EOPNOTSUPP; + } } -#endif -static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) +static int __init emac_probe(struct ocp_device *ocpdev) { - int deferred_init = 0; - int rc = 0, i; + struct ocp_func_emac_data *emacdata = ocpdev->def->additions; struct net_device *ndev; - struct ocp_enet_private *ep; - struct ocp_func_emac_data *emacdata; - int commac_reg = 0; - u32 phy_map; + struct ocp_device *maldev; + struct ocp_enet_private *dev; + int err, i; + + DBG("%d: probe" NL, ocpdev->def->index); - emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions; if (!emacdata) { printk(KERN_ERR "emac%d: Missing additional data!\n", ocpdev->def->index); @@ -1738,304 +1936,312 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) /* Allocate our net_device structure */ ndev = alloc_etherdev(sizeof(struct ocp_enet_private)); - if (ndev == NULL) { - printk(KERN_ERR - "emac%d: Could not allocate ethernet device.\n", + if (!ndev) { + printk(KERN_ERR "emac%d: could not allocate ethernet device!\n", ocpdev->def->index); return -ENOMEM; } - ep = ndev->priv; - ep->ndev = ndev; - ep->ocpdev = ocpdev; - ndev->irq = ocpdev->def->irq; - ep->wol_irq = emacdata->wol_irq; - if (emacdata->mdio_idx >= 0) { - if (emacdata->mdio_idx == ocpdev->def->index) { - /* Set the common MDIO net_device */ - mdio_ndev = ndev; - deferred_init = 1; - } - ep->mdio_dev = mdio_ndev; - } else { - ep->mdio_dev = ndev; - } + dev = ndev->priv; + dev->ndev = ndev; + dev->ldev = &ocpdev->dev; + dev->def = ocpdev->def; + SET_MODULE_OWNER(ndev); - ocp_set_drvdata(ocpdev, ndev); - - spin_lock_init(&ep->lock); - - /* Fill out MAL informations and register commac */ - ep->mal = mal; - ep->mal_tx_chan = emacdata->mal_tx_chan; - ep->mal_rx_chan = emacdata->mal_rx_chan; - ep->commac.ops = &emac_commac_ops; - ep->commac.dev = ndev; - ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan); - ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan); - rc = mal_register_commac(ep->mal, &ep->commac); - if (rc != 0) - goto bail; - commac_reg = 1; - - /* Map our MMIOs */ - ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t)); - - /* Check if we need to attach to a ZMII */ - if (emacdata->zmii_idx >= 0) { - ep->zmii_input = emacdata->zmii_mux; - ep->zmii_dev = - ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII, - emacdata->zmii_idx); - if (ep->zmii_dev == NULL) - printk(KERN_WARNING - "emac%d: ZMII %d requested but not found !\n", - ocpdev->def->index, emacdata->zmii_idx); - else if ((rc = - emac_init_zmii(ep->zmii_dev, ep->zmii_input, - emacdata->phy_mode)) != 0) - goto bail; + /* Find MAL device we are connected to */ + maldev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx); + if (!maldev) { + printk(KERN_ERR "emac%d: unknown mal%d device!\n", + dev->def->index, emacdata->mal_idx); + err = -ENODEV; + goto out; + } + dev->mal = ocp_get_drvdata(maldev); + if (!dev->mal) { + printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n", + dev->def->index, emacdata->mal_idx); + err = -ENODEV; + goto out; } - /* Check if we need to attach to a RGMII */ - if (emacdata->rgmii_idx >= 0) { - ep->rgmii_input = emacdata->rgmii_mux; - ep->rgmii_dev = - ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII, - emacdata->rgmii_idx); - if (ep->rgmii_dev == NULL) - printk(KERN_WARNING - "emac%d: RGMII %d requested but not found !\n", - ocpdev->def->index, emacdata->rgmii_idx); - else if ((rc = - emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input, - emacdata->phy_mode)) != 0) - goto bail; + /* Register with MAL */ + dev->commac.ops = &emac_commac_ops; + dev->commac.dev = dev; + dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan); + dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan); + err = mal_register_commac(dev->mal, &dev->commac); + if (err) { + printk(KERN_ERR "emac%d: failed to register with mal%d!\n", + dev->def->index, emacdata->mal_idx); + goto out; + } + dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); + dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); + + /* Get pointers to BD rings */ + dev->tx_desc = + dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, + emacdata->mal_tx_chan); + dev->rx_desc = + dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, + emacdata->mal_rx_chan); + + DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc); + DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc); + + /* Clean rings */ + memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); + memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); + + /* If we depend on another EMAC for MDIO, check whether it was probed already */ + if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) { + struct ocp_device *mdiodev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, + emacdata->mdio_idx); + if (!mdiodev) { + printk(KERN_ERR "emac%d: unknown emac%d device!\n", + dev->def->index, emacdata->mdio_idx); + err = -ENODEV; + goto out2; + } + dev->mdio_dev = ocp_get_drvdata(mdiodev); + if (!dev->mdio_dev) { + printk(KERN_ERR + "emac%d: emac%d hasn't been initialized yet!\n", + dev->def->index, emacdata->mdio_idx); + err = -ENODEV; + goto out2; + } } - /* Check if we need to attach to a TAH */ - if (emacdata->tah_idx >= 0) { - ep->tah_dev = - ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, - emacdata->tah_idx); - if (ep->tah_dev == NULL) - printk(KERN_WARNING - "emac%d: TAH %d requested but not found !\n", - ocpdev->def->index, emacdata->tah_idx); - else if ((rc = emac_init_tah(ep)) != 0) - goto bail; + /* Attach to ZMII, if needed */ + if ((err = zmii_attach(dev)) != 0) + goto out2; + + /* Attach to RGMII, if needed */ + if ((err = rgmii_attach(dev)) != 0) + goto out3; + + /* Attach to TAH, if needed */ + if ((err = tah_attach(dev)) != 0) + goto out4; + + /* Map EMAC regs */ + dev->emacp = + (struct emac_regs *)ioremap(dev->def->paddr, + sizeof(struct emac_regs)); + if (!dev->emacp) { + printk(KERN_ERR "emac%d: could not ioremap device registers!\n", + dev->def->index); + err = -ENOMEM; + goto out5; } - if (deferred_init) { - if (!list_empty(&emac_init_list)) { - struct list_head *entry; - struct emac_def_dev *ddev; + /* Fill in MAC address */ + for (i = 0; i < 6; ++i) + ndev->dev_addr[i] = emacdata->mac_addr[i]; - list_for_each(entry, &emac_init_list) { - ddev = - list_entry(entry, struct emac_def_dev, - link); - emac_init_device(ddev->ocpdev, ddev->mal); - } + /* Set some link defaults before we can find out real parameters */ + dev->phy.speed = SPEED_100; + dev->phy.duplex = DUPLEX_FULL; + dev->phy.autoneg = AUTONEG_DISABLE; + dev->phy.pause = dev->phy.asym_pause = 0; + init_timer(&dev->link_timer); + dev->link_timer.function = emac_link_timer; + dev->link_timer.data = (unsigned long)dev; + + /* Find PHY if any */ + dev->phy.dev = ndev; + dev->phy.mode = emacdata->phy_mode; + if (emacdata->phy_map != 0xffffffff) { + u32 phy_map = emacdata->phy_map | busy_phy_map; + u32 adv; + + DBG("%d: PHY maps %08x %08x" NL, dev->def->index, + emacdata->phy_map, busy_phy_map); + + EMAC_RX_CLK_TX(dev->def->index); + + dev->phy.mdio_read = emac_mdio_read; + dev->phy.mdio_write = emac_mdio_write; + + /* Configure EMAC with defaults so we can at least use MDIO + * This is needed mostly for 440GX + */ + if (emac_phy_gpcs(dev->phy.mode)) { + /* XXX + * Make GPCS PHY address equal to EMAC index. + * We probably should take into account busy_phy_map + * and/or phy_map here. + */ + dev->phy.address = dev->def->index; } - } + + emac_configure(dev); + + for (i = 0; i < 0x20; phy_map >>= 1, ++i) + if (!(phy_map & 1)) { + int r; + busy_phy_map |= 1 << i; - /* Init link monitoring timer */ - init_timer(&ep->link_timer); - ep->link_timer.function = emac_link_timer; - ep->link_timer.data = (unsigned long)ep; - ep->timer_ticks = 0; - - /* Fill up the mii_phy structure */ - ep->phy_mii.dev = ndev; - ep->phy_mii.mdio_read = emac_phy_read; - ep->phy_mii.mdio_write = emac_phy_write; - ep->phy_mii.mode = emacdata->phy_mode; - - /* Find PHY */ - phy_map = emacdata->phy_map | busy_phy_map; - for (i = 0; i <= 0x1f; i++, phy_map >>= 1) { - if ((phy_map & 0x1) == 0) { - int val = emac_phy_read(ndev, i, MII_BMCR); - if (val != 0xffff && val != -1) - break; + /* Quick check if there is a PHY at the address */ + r = emac_mdio_read(dev->ndev, i, MII_BMCR); + if (r == 0xffff || r < 0) + continue; + if (!mii_phy_probe(&dev->phy, i)) + break; + } + if (i == 0x20) { + printk(KERN_WARNING "emac%d: can't find PHY!\n", + dev->def->index); + goto out6; } - } - if (i == 0x20) { - printk(KERN_WARNING "emac%d: Can't find PHY.\n", - ocpdev->def->index); - rc = -ENODEV; - goto bail; - } - busy_phy_map |= 1 << i; - ep->mii_phy_addr = i; - rc = mii_phy_probe(&ep->phy_mii, i); - if (rc) { - printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n", - ocpdev->def->index); - rc = -ENODEV; - goto bail; - } - - /* Disable any PHY features not supported by the platform */ - ep->phy_mii.def->features &= ~emacdata->phy_feat_exc; - /* Setup initial PHY config & startup aneg */ - if (ep->phy_mii.def->ops->init) - ep->phy_mii.def->ops->init(&ep->phy_mii); - netif_carrier_off(ndev); - if (ep->phy_mii.def->features & SUPPORTED_Autoneg) - ep->want_autoneg = 1; - else { - ep->want_autoneg = 0; + /* Init PHY */ + if (dev->phy.def->ops->init) + dev->phy.def->ops->init(&dev->phy); - /* Select highest supported speed/duplex */ - if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) { - ep->phy_mii.speed = SPEED_1000; - ep->phy_mii.duplex = DUPLEX_FULL; - } else if (ep->phy_mii.def->features & - SUPPORTED_1000baseT_Half) { - ep->phy_mii.speed = SPEED_1000; - ep->phy_mii.duplex = DUPLEX_HALF; - } else if (ep->phy_mii.def->features & - SUPPORTED_100baseT_Full) { - ep->phy_mii.speed = SPEED_100; - ep->phy_mii.duplex = DUPLEX_FULL; - } else if (ep->phy_mii.def->features & - SUPPORTED_100baseT_Half) { - ep->phy_mii.speed = SPEED_100; - ep->phy_mii.duplex = DUPLEX_HALF; - } else if (ep->phy_mii.def->features & - SUPPORTED_10baseT_Full) { - ep->phy_mii.speed = SPEED_10; - ep->phy_mii.duplex = DUPLEX_FULL; + /* Disable any PHY features not supported by the platform */ + dev->phy.def->features &= ~emacdata->phy_feat_exc; + + /* Setup initial link parameters */ + if (dev->phy.features & SUPPORTED_Autoneg) { + adv = dev->phy.features; +#if !defined(CONFIG_40x) + adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; +#endif + /* Restart autonegotiation */ + dev->phy.def->ops->setup_aneg(&dev->phy, adv); } else { - ep->phy_mii.speed = SPEED_10; - ep->phy_mii.duplex = DUPLEX_HALF; + u32 f = dev->phy.def->features; + int speed = SPEED_10, fd = DUPLEX_HALF; + + /* Select highest supported speed/duplex */ + if (f & SUPPORTED_1000baseT_Full) { + speed = SPEED_1000; + fd = DUPLEX_FULL; + } else if (f & SUPPORTED_1000baseT_Half) + speed = SPEED_1000; + else if (f & SUPPORTED_100baseT_Full) { + speed = SPEED_100; + fd = DUPLEX_FULL; + } else if (f & SUPPORTED_100baseT_Half) + speed = SPEED_100; + else if (f & SUPPORTED_10baseT_Full) + fd = DUPLEX_FULL; + + /* Force link parameters */ + dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); } - } - emac_start_link(ep, NULL); + } else { + emac_reset(dev); - /* read the MAC Address */ - for (i = 0; i < 6; i++) - ndev->dev_addr[i] = emacdata->mac_addr[i]; + /* PHY-less configuration. + * XXX I probably should move these settings to emacdata + */ + dev->phy.address = -1; + dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; + dev->phy.pause = 1; + } /* Fill in the driver function table */ ndev->open = &emac_open; - ndev->hard_start_xmit = &emac_start_xmit; + if (dev->tah_dev) { + ndev->hard_start_xmit = &emac_start_xmit_sg; + ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + } else + ndev->hard_start_xmit = &emac_start_xmit; + ndev->tx_timeout = &emac_full_tx_reset; + ndev->watchdog_timeo = 5 * HZ; ndev->stop = &emac_close; ndev->get_stats = &emac_stats; - if (emacdata->jumbo) - ndev->change_mtu = &emac_change_mtu; - ndev->set_mac_address = &emac_set_mac_address; ndev->set_multicast_list = &emac_set_multicast_list; ndev->do_ioctl = &emac_ioctl; + if (emac_phy_supports_gige(emacdata->phy_mode)) { + ndev->change_mtu = &emac_change_mtu; + dev->commac.ops = &emac_commac_sg_ops; + } SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); - if (emacdata->tah_idx >= 0) - ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG; -#ifdef CONFIG_NET_POLL_CONTROLLER - ndev->poll_controller = emac_netpoll; -#endif - SET_MODULE_OWNER(ndev); + netif_carrier_off(ndev); + netif_stop_queue(ndev); + + err = register_netdev(ndev); + if (err) { + printk(KERN_ERR "emac%d: failed to register net device (%d)!\n", + dev->def->index, err); + goto out6; + } - rc = register_netdev(ndev); - if (rc != 0) - goto bail; + ocp_set_drvdata(ocpdev, dev); - printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", - ndev->name, + printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, dev->def->index, ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); - printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n", - ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr); - - bail: - if (rc && commac_reg) - mal_unregister_commac(ep->mal, &ep->commac); - if (rc && ndev) - kfree(ndev); - - return rc; -} - -static int emac_probe(struct ocp_device *ocpdev) -{ - struct ocp_device *maldev; - struct ibm_ocp_mal *mal; - struct ocp_func_emac_data *emacdata; - - emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions; - if (emacdata == NULL) { - printk(KERN_ERR "emac%d: Missing additional datas !\n", - ocpdev->def->index); - return -ENODEV; - } - /* Get the MAL device */ - maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx); - if (maldev == NULL) { - printk("No maldev\n"); - return -ENODEV; - } - /* - * Get MAL driver data, it must be here due to link order. - * When the driver is modularized, symbol dependencies will - * ensure the MAL driver is already present if built as a - * module. - */ - mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev); - if (mal == NULL) { - printk("No maldrv\n"); - return -ENODEV; - } + if (dev->phy.address >= 0) + printk("%s: found %s PHY (0x%02x)\n", ndev->name, + dev->phy.def->name, dev->phy.address); - /* If we depend on another EMAC for MDIO, wait for it to show up */ - if (emacdata->mdio_idx >= 0 && - (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) { - struct emac_def_dev *ddev; - /* Add this index to the deferred init table */ - ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL); - ddev->ocpdev = ocpdev; - ddev->mal = mal; - list_add_tail(&ddev->link, &emac_init_list); - } else { - emac_init_device(ocpdev, mal); - } + emac_dbg_register(dev->def->index, dev); return 0; + out6: + iounmap((void *)dev->emacp); + out5: + tah_fini(dev->tah_dev); + out4: + rgmii_fini(dev->rgmii_dev, dev->rgmii_input); + out3: + zmii_fini(dev->zmii_dev, dev->zmii_input); + out2: + mal_unregister_commac(dev->mal, &dev->commac); + out: + kfree(ndev); + return err; } -/* Structure for a device driver */ static struct ocp_device_id emac_ids[] = { - {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC}, - {.vendor = OCP_VENDOR_INVALID} + { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC }, + { .vendor = OCP_VENDOR_INVALID} }; static struct ocp_driver emac_driver = { .name = "emac", .id_table = emac_ids, - .probe = emac_probe, .remove = emac_remove, }; static int __init emac_init(void) { - printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n"); - printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n"); + printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); + + DBG(": init" NL); - if (skb_res > 2) { - printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n", - skb_res); - skb_res = 2; + if (mal_init()) + return -ENODEV; + + EMAC_CLK_INTERNAL; + if (ocp_register_driver(&emac_driver)) { + EMAC_CLK_EXTERNAL; + ocp_unregister_driver(&emac_driver); + mal_exit(); + return -ENODEV; } + EMAC_CLK_EXTERNAL; - return ocp_register_driver(&emac_driver); + emac_init_debug(); + return 0; } static void __exit emac_exit(void) { + DBG(": exit" NL); ocp_unregister_driver(&emac_driver); + mal_exit(); + emac_fini_debug(); } module_init(emac_init); diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h index 97e6e1ea8c89..e9b44d030ac3 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.h +++ b/drivers/net/ibm_emac/ibm_emac_core.h @@ -1,146 +1,221 @@ /* - * ibm_emac_core.h + * drivers/net/ibm_emac/ibm_emac_core.h * - * Ethernet driver for the built in ethernet on the IBM 405 PowerPC - * processor. + * Driver for PowerPC 4xx on-chip ethernet controller. * - * Armin Kuster akuster@mvista.com - * Sept, 2001 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Orignial driver - * Johnnie Peters - * jpeters@mvista.com - * - * Copyright 2000 MontaVista Softare Inc. + * Based on original work by + * Armin Kuster + * Johnnie Peters + * Copyright 2000, 2001 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ +#ifndef __IBM_EMAC_CORE_H_ +#define __IBM_EMAC_CORE_H_ -#ifndef _IBM_EMAC_CORE_H_ -#define _IBM_EMAC_CORE_H_ - +#include #include +#include #include -#include /* For phys_addr_t */ #include "ibm_emac.h" #include "ibm_emac_phy.h" -#include "ibm_emac_rgmii.h" #include "ibm_emac_zmii.h" +#include "ibm_emac_rgmii.h" #include "ibm_emac_mal.h" #include "ibm_emac_tah.h" -#ifndef CONFIG_IBM_EMAC_TXB -#define NUM_TX_BUFF 64 -#define NUM_RX_BUFF 64 -#else -#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB -#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB -#endif +#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB +#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB -/* This does 16 byte alignment, exactly what we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ -#ifndef CONFIG_IBM_EMAC_SKBRES -#define SKB_RES 2 -#else -#define SKB_RES CONFIG_IBM_EMAC_SKBRES +/* Simple sanity check */ +#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 +#error Invalid number of buffer descriptors (greater than 256) #endif -/* Note about alignement. alloc_skb() returns a cache line - * aligned buffer. However, dev_alloc_skb() will add 16 more - * bytes and "reserve" them, so our buffer will actually end - * on a half cache line. What we do is to use directly - * alloc_skb, allocate 16 more bytes to match the total amount - * allocated by dev_alloc_skb(), but we don't reserve. +// XXX +#define EMAC_MIN_MTU 46 +#define EMAC_MAX_MTU 9000 + +/* Maximum L2 header length (VLAN tagged, no FCS) */ +#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) + +/* RX BD size for the given MTU */ +static inline int emac_rx_size(int mtu) +{ + if (mtu > ETH_DATA_LEN) + return MAL_MAX_RX_SIZE; + else + return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); +} + +#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) + +#define EMAC_RX_SKB_HEADROOM \ + EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) + +/* Size of RX skb for the given MTU */ +static inline int emac_rx_skb_size(int mtu) +{ + int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); + return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; +} + +/* RX DMA sync size */ +static inline int emac_rx_sync_size(int mtu) +{ + return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); +} + +/* Driver statistcs is split into two parts to make it more cache friendly: + * - normal statistics (packet count, etc) + * - error statistics + * + * When statistics is requested by ethtool, these parts are concatenated, + * normal one goes first. + * + * Please, keep these structures in sync with emac_stats_keys. */ -#define MAX_NUM_BUF_DESC 255 -#define DESC_BUF_SIZE 4080 /* max 4096-16 */ -#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16) - -/* Transmitter timeout. */ -#define TX_TIMEOUT (2*HZ) - -/* MDIO latency delay */ -#define MDIO_DELAY 250 - -/* Power managment shift registers */ -#define IBM_CPM_EMMII 0 /* Shift value for MII */ -#define IBM_CPM_EMRX 1 /* Shift value for recv */ -#define IBM_CPM_EMTX 2 /* Shift value for MAC */ -#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX)) - -#define ENET_HEADER_SIZE 14 -#define ENET_FCS_SIZE 4 -#define ENET_DEF_MTU_SIZE 1500 -#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE) -#define EMAC_MIN_FRAME 64 -#define EMAC_MAX_FRAME 9018 -#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) -#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) - -#ifdef CONFIG_IBM_EMAC_ERRMSG -void emac_serr_dump_0(struct net_device *dev); -void emac_serr_dump_1(struct net_device *dev); -void emac_err_dump(struct net_device *dev, int em0isr); -void emac_phy_dump(struct net_device *); -void emac_desc_dump(struct net_device *); -void emac_mac_dump(struct net_device *); -void emac_mal_dump(struct net_device *); -#else -#define emac_serr_dump_0(dev) do { } while (0) -#define emac_serr_dump_1(dev) do { } while (0) -#define emac_err_dump(dev,x) do { } while (0) -#define emac_phy_dump(dev) do { } while (0) -#define emac_desc_dump(dev) do { } while (0) -#define emac_mac_dump(dev) do { } while (0) -#define emac_mal_dump(dev) do { } while (0) -#endif + +/* Normal TX/RX Statistics */ +struct ibm_emac_stats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + u64 rx_packets_csum; + u64 tx_packets_csum; +}; + +/* Error statistics */ +struct ibm_emac_error_stats { + u64 tx_undo; + + /* Software RX Errors */ + u64 rx_dropped_stack; + u64 rx_dropped_oom; + u64 rx_dropped_error; + u64 rx_dropped_resize; + u64 rx_dropped_mtu; + u64 rx_stopped; + /* BD reported RX errors */ + u64 rx_bd_errors; + u64 rx_bd_overrun; + u64 rx_bd_bad_packet; + u64 rx_bd_runt_packet; + u64 rx_bd_short_event; + u64 rx_bd_alignment_error; + u64 rx_bd_bad_fcs; + u64 rx_bd_packet_too_long; + u64 rx_bd_out_of_range; + u64 rx_bd_in_range; + /* EMAC IRQ reported RX errors */ + u64 rx_parity; + u64 rx_fifo_overrun; + u64 rx_overrun; + u64 rx_bad_packet; + u64 rx_runt_packet; + u64 rx_short_event; + u64 rx_alignment_error; + u64 rx_bad_fcs; + u64 rx_packet_too_long; + u64 rx_out_of_range; + u64 rx_in_range; + + /* Software TX Errors */ + u64 tx_dropped; + /* BD reported TX errors */ + u64 tx_bd_errors; + u64 tx_bd_bad_fcs; + u64 tx_bd_carrier_loss; + u64 tx_bd_excessive_deferral; + u64 tx_bd_excessive_collisions; + u64 tx_bd_late_collision; + u64 tx_bd_multple_collisions; + u64 tx_bd_single_collision; + u64 tx_bd_underrun; + u64 tx_bd_sqe; + /* EMAC IRQ reported TX errors */ + u64 tx_parity; + u64 tx_underrun; + u64 tx_sqe; + u64 tx_errors; +}; + +#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \ + sizeof(struct ibm_emac_error_stats)) \ + / sizeof(u64)) struct ocp_enet_private { - struct sk_buff *tx_skb[NUM_TX_BUFF]; - struct sk_buff *rx_skb[NUM_RX_BUFF]; - struct mal_descriptor *tx_desc; - struct mal_descriptor *rx_desc; - struct mal_descriptor *rx_dirty; - struct net_device_stats stats; - int tx_cnt; - int rx_slot; - int dirty_rx; - int tx_slot; - int ack_slot; - int rx_buffer_size; - - struct mii_phy phy_mii; - int mii_phy_addr; - int want_autoneg; - int timer_ticks; - struct timer_list link_timer; - struct net_device *mdio_dev; - - struct ocp_device *rgmii_dev; - int rgmii_input; - - struct ocp_device *zmii_dev; - int zmii_input; - - struct ibm_ocp_mal *mal; - int mal_tx_chan, mal_rx_chan; - struct mal_commac commac; - - struct ocp_device *tah_dev; - - int opened; - int going_away; - int wol_irq; - emac_t *emacp; - struct ocp_device *ocpdev; - struct net_device *ndev; - spinlock_t lock; + struct net_device *ndev; /* 0 */ + struct emac_regs *emacp; + + struct mal_descriptor *tx_desc; + int tx_cnt; + int tx_slot; + int ack_slot; + + struct mal_descriptor *rx_desc; + int rx_slot; + struct sk_buff *rx_sg_skb; /* 1 */ + int rx_skb_size; + int rx_sync_size; + + struct ibm_emac_stats stats; + struct ocp_device *tah_dev; + + struct ibm_ocp_mal *mal; + struct mal_commac commac; + + struct sk_buff *tx_skb[NUM_TX_BUFF]; + struct sk_buff *rx_skb[NUM_RX_BUFF]; + + struct ocp_device *zmii_dev; + int zmii_input; + struct ocp_enet_private *mdio_dev; + struct ocp_device *rgmii_dev; + int rgmii_input; + + struct ocp_def *def; + + struct mii_phy phy; + struct timer_list link_timer; + int reset_failed; + + struct ibm_emac_error_stats estats; + struct net_device_stats nstats; + + struct device* ldev; }; -#endif /* _IBM_EMAC_CORE_H_ */ + +/* Ethtool get_regs complex data. + * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH + * when available. + * + * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, + * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. + * Each register component is preceded with emac_ethtool_regs_subhdr. + * Order of the optional headers follows their relative bit posititions + * in emac_ethtool_regs_hdr.components + */ +#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 +#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 +#define EMAC_ETHTOOL_REGS_TAH 0x00000004 + +struct emac_ethtool_regs_hdr { + u32 components; +}; + +struct emac_ethtool_regs_subhdr { + u32 version; + u32 index; +}; + +#endif /* __IBM_EMAC_CORE_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c index c8512046cf84..75d3b8639041 100644 --- a/drivers/net/ibm_emac/ibm_emac_debug.c +++ b/drivers/net/ibm_emac/ibm_emac_debug.c @@ -1,224 +1,213 @@ /* - * ibm_ocp_debug.c + * drivers/net/ibm_emac/ibm_emac_debug.c * - * This has all the debug routines that where in *_enet.c + * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. * - * Armin Kuster akuster@mvista.com - * April , 2002 - * - * Copyright 2002 MontaVista Softare Inc. + * Copyright (c) 2004, 2005 Zultys Technologies + * Eugene Surovegin or * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - #include +#include +#include #include #include +#include #include -#include "ibm_ocp_mal.h" -#include "ibm_ocp_zmii.h" -#include "ibm_ocp_enet.h" -extern int emac_phy_read(struct net_device *dev, int mii_id, int reg); +#include "ibm_emac_core.h" + +static void emac_desc_dump(int idx, struct ocp_enet_private *p) +{ + int i; + printk("** EMAC%d TX BDs **\n" + " tx_cnt = %d tx_slot = %d ack_slot = %d\n", + idx, p->tx_cnt, p->tx_slot, p->ack_slot); + for (i = 0; i < NUM_TX_BUFF / 2; ++i) + printk + ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", + i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ', + p->tx_desc[i].ctrl, p->tx_desc[i].data_len, + NUM_TX_BUFF / 2 + i, + p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr, + p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ', + p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl, + p->tx_desc[NUM_TX_BUFF / 2 + i].data_len); + + printk("** EMAC%d RX BDs **\n" + " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n" + " rx_sg_skb = 0x%p\n", + idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size, + p->rx_sync_size, p->rx_sg_skb); + for (i = 0; i < NUM_RX_BUFF / 2; ++i) + printk + ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", + i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ', + p->rx_desc[i].ctrl, p->rx_desc[i].data_len, + NUM_RX_BUFF / 2 + i, + p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr, + p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ', + p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl, + p->rx_desc[NUM_RX_BUFF / 2 + i].data_len); +} + +static void emac_mac_dump(int idx, struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + + printk("** EMAC%d registers **\n" + "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n" + "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n" + "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n" + "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x " + "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n" + "LSA = %04x%08x IPGVR = 0x%04x\n" + "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n" + "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n", + idx, in_be32(&p->mr0), in_be32(&p->mr1), + in_be32(&p->tmr0), in_be32(&p->tmr1), + in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser), + in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid), + in_be32(&p->vtci), + in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3), + in_be32(&p->iaht4), + in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3), + in_be32(&p->gaht4), + in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr), + in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr), + in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr) + ); + + emac_desc_dump(idx, dev); +} + +static void emac_mal_dump(struct ibm_ocp_mal *mal) +{ + struct ocp_func_mal_data *maldata = mal->def->additions; + int i; + + printk("** MAL%d Registers **\n" + "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n" + "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n" + "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n", + mal->def->index, + get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR), + get_mal_dcrn(mal, MAL_IER), + get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR), + get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR), + get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR), + get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR) + ); + + printk("TX|"); + for (i = 0; i < maldata->num_tx_chans; ++i) { + if (i && !(i % 4)) + printk("\n "); + printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i))); + } + printk("\nRX|"); + for (i = 0; i < maldata->num_rx_chans; ++i) { + if (i && !(i % 4)) + printk("\n "); + printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i))); + } + printk("\n "); + for (i = 0; i < maldata->num_rx_chans; ++i) { + u32 r = get_mal_dcrn(mal, MAL_RCBS(i)); + if (i && !(i % 3)) + printk("\n "); + printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16); + } + printk("\n"); +} + +static struct ocp_enet_private *__emacs[4]; +static struct ibm_ocp_mal *__mals[1]; -void emac_phy_dump(struct net_device *dev) +void emac_dbg_register(int idx, struct ocp_enet_private *dev) { - struct ocp_enet_private *fep = dev->priv; - unsigned long i; - uint data; - - printk(KERN_DEBUG " Prepare for Phy dump....\n"); - for (i = 0; i < 0x1A; i++) { - data = emac_phy_read(dev, fep->mii_phy_addr, i); - printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data); - if (i == 0x07) - i = 0x0f; + unsigned long flags; + + if (idx >= sizeof(__emacs) / sizeof(__emacs[0])) { + printk(KERN_WARNING + "invalid index %d when registering EMAC for debugging\n", + idx); + return; } + + local_irq_save(flags); + __emacs[idx] = dev; + local_irq_restore(flags); } -void emac_desc_dump(struct net_device *dev) +void mal_dbg_register(int idx, struct ibm_ocp_mal *mal) { - struct ocp_enet_private *fep = dev->priv; - int curr_slot; - - printk(KERN_DEBUG - "dumping the receive descriptors: current slot is %d\n", - fep->rx_slot); - for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) { - printk(KERN_DEBUG - "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n", - curr_slot, fep->rx_desc[curr_slot].ctrl, - fep->rx_desc[curr_slot].data_len, - (unsigned int)fep->rx_desc[curr_slot].data_ptr); + unsigned long flags; + + if (idx >= sizeof(__mals) / sizeof(__mals[0])) { + printk(KERN_WARNING + "invalid index %d when registering MAL for debugging\n", + idx); + return; } + + local_irq_save(flags); + __mals[idx] = mal; + local_irq_restore(flags); } -void emac_mac_dump(struct net_device *dev) +void emac_dbg_dump_all(void) { - struct ocp_enet_private *fep = dev->priv; - volatile emac_t *emacp = fep->emacp; - - printk(KERN_DEBUG "EMAC DEBUG ********** \n"); - printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0)); - printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1)); - printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0)); - printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1)); - printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr)); - printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr)); - printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser)); - printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr)); - printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr)); - printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n", - in_be32(&emacp->em0vtpid)); + unsigned int i; + unsigned long flags; + + local_irq_save(flags); + + for (i = 0; i < sizeof(__mals) / sizeof(__mals[0]); ++i) + if (__mals[i]) + emac_mal_dump(__mals[i]); + + for (i = 0; i < sizeof(__emacs) / sizeof(__emacs[0]); ++i) + if (__emacs[i]) + emac_mac_dump(i, __emacs[i]); + + local_irq_restore(flags); } -void emac_mal_dump(struct net_device *dev) +#if defined(CONFIG_MAGIC_SYSRQ) +static void emac_sysrq_handler(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) { - struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; - - printk(KERN_DEBUG " MAL DEBUG ********** \n"); - printk(KERN_DEBUG " MCR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALCR)); - printk(KERN_DEBUG " ESR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALESR)); - printk(KERN_DEBUG " IER ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALIER)); -#ifdef CONFIG_40x - printk(KERN_DEBUG " DBR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR)); -#endif /* CONFIG_40x */ - printk(KERN_DEBUG " TXCASR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR)); - printk(KERN_DEBUG " TXCARR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR)); - printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR)); - printk(KERN_DEBUG " TXDEIR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR)); - printk(KERN_DEBUG " RXCASR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR)); - printk(KERN_DEBUG " RXCARR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR)); - printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR)); - printk(KERN_DEBUG " RXDEIR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR)); - printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R)); - printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R)); - printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R)); - printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R)); - printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R)); - printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R)); - printk(KERN_DEBUG " RCBS0 ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0)); - printk(KERN_DEBUG " RCBS1 ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1)); + emac_dbg_dump_all(); } -void emac_serr_dump_0(struct net_device *dev) +static struct sysrq_key_op emac_sysrq_op = { + .handler = emac_sysrq_handler, + .help_msg = "emaC", + .action_msg = "Show EMAC(s) status", +}; + +int __init emac_init_debug(void) { - struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; - unsigned long int mal_error, plb_error, plb_addr; - - mal_error = get_mal_dcrn(mal, DCRN_MALESR); - printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n", - (mal_error & 0x40000000) ? "Receive" : - "Transmit", (mal_error & 0x3e000000) >> 25); - printk(KERN_DEBUG " ----- latched error -----\n"); - if (mal_error & MALESR_DE) - printk(KERN_DEBUG " DE: descriptor error\n"); - if (mal_error & MALESR_OEN) - printk(KERN_DEBUG " ONE: OPB non-fullword error\n"); - if (mal_error & MALESR_OTE) - printk(KERN_DEBUG " OTE: OPB timeout error\n"); - if (mal_error & MALESR_OSE) - printk(KERN_DEBUG " OSE: OPB slave error\n"); - - if (mal_error & MALESR_PEIN) { - plb_error = mfdcr(DCRN_PLB0_BESR); - printk(KERN_DEBUG - " PEIN: PLB error, PLB0_BESR is 0x%x\n", - (unsigned int)plb_error); - plb_addr = mfdcr(DCRN_PLB0_BEAR); - printk(KERN_DEBUG - " PEIN: PLB error, PLB0_BEAR is 0x%x\n", - (unsigned int)plb_addr); - } + return register_sysrq_key('c', &emac_sysrq_op); } -void emac_serr_dump_1(struct net_device *dev) +void __exit emac_fini_debug(void) { - struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; - int mal_error = get_mal_dcrn(mal, DCRN_MALESR); - - printk(KERN_DEBUG " ----- cumulative errors -----\n"); - if (mal_error & MALESR_DEI) - printk(KERN_DEBUG " DEI: descriptor error interrupt\n"); - if (mal_error & MALESR_ONEI) - printk(KERN_DEBUG " OPB non-fullword error interrupt\n"); - if (mal_error & MALESR_OTEI) - printk(KERN_DEBUG " OTEI: timeout error interrupt\n"); - if (mal_error & MALESR_OSEI) - printk(KERN_DEBUG " OSEI: slave error interrupt\n"); - if (mal_error & MALESR_PBEI) - printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n"); + unregister_sysrq_key('c', &emac_sysrq_op); } -void emac_err_dump(struct net_device *dev, int em0isr) +#else +int __init emac_init_debug(void) +{ + return 0; +} +void __exit emac_fini_debug(void) { - printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name); - - if (em0isr & EMAC_ISR_OVR) - printk(KERN_DEBUG " OVR: overrun\n"); - if (em0isr & EMAC_ISR_PP) - printk(KERN_DEBUG " PP: control pause packet\n"); - if (em0isr & EMAC_ISR_BP) - printk(KERN_DEBUG " BP: packet error\n"); - if (em0isr & EMAC_ISR_RP) - printk(KERN_DEBUG " RP: runt packet\n"); - if (em0isr & EMAC_ISR_SE) - printk(KERN_DEBUG " SE: short event\n"); - if (em0isr & EMAC_ISR_ALE) - printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n"); - if (em0isr & EMAC_ISR_BFCS) - printk(KERN_DEBUG " BFCS: bad FCS\n"); - if (em0isr & EMAC_ISR_PTLE) - printk(KERN_DEBUG " PTLE: oversized packet\n"); - if (em0isr & EMAC_ISR_ORE) - printk(KERN_DEBUG - " ORE: packet length field > max allowed LLC\n"); - if (em0isr & EMAC_ISR_IRE) - printk(KERN_DEBUG " IRE: In Range error\n"); - if (em0isr & EMAC_ISR_DBDM) - printk(KERN_DEBUG " DBDM: xmit error or SQE\n"); - if (em0isr & EMAC_ISR_DB0) - printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n"); - if (em0isr & EMAC_ISR_SE0) - printk(KERN_DEBUG - " SE0: Signal Quality Error test failure from TX channel 0\n"); - if (em0isr & EMAC_ISR_TE0) - printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n"); - if (em0isr & EMAC_ISR_DB1) - printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n"); - if (em0isr & EMAC_ISR_SE1) - printk(KERN_DEBUG - " SE1: Signal Quality Error test failure from TX channel 1\n"); - if (em0isr & EMAC_ISR_TE1) - printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n"); - if (em0isr & EMAC_ISR_MOS) - printk(KERN_DEBUG " MOS\n"); - if (em0isr & EMAC_ISR_MOF) - printk(KERN_DEBUG " MOF\n"); - - emac_mac_dump(dev); - emac_mal_dump(dev); } +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h new file mode 100644 index 000000000000..e85fbe0a8da9 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_debug.h @@ -0,0 +1,63 @@ +/* + * drivers/net/ibm_emac/ibm_ocp_debug.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. + * + * Copyright (c) 2004, 2005 Zultys Technologies + * Eugene Surovegin or + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_EMAC_DEBUG_H_ +#define __IBM_EMAC_DEBUG_H_ + +#include +#include +#include "ibm_emac_core.h" +#include "ibm_emac_mal.h" + +#if defined(CONFIG_IBM_EMAC_DEBUG) +void emac_dbg_register(int idx, struct ocp_enet_private *dev); +void mal_dbg_register(int idx, struct ibm_ocp_mal *mal); +int emac_init_debug(void) __init; +void emac_fini_debug(void) __exit; +void emac_dbg_dump_all(void); +# define DBG_LEVEL 1 +#else +# define emac_dbg_register(x,y) ((void)0) +# define mal_dbg_register(x,y) ((void)0) +# define emac_init_debug() ((void)0) +# define emac_fini_debug() ((void)0) +# define emac_dbg_dump_all() ((void)0) +# define DBG_LEVEL 0 +#endif + +#if DBG_LEVEL > 0 +# define DBG(f,x...) printk("emac" f, ##x) +# define MAL_DBG(f,x...) printk("mal" f, ##x) +# define ZMII_DBG(f,x...) printk("zmii" f, ##x) +# define RGMII_DBG(f,x...) printk("rgmii" f, ##x) +# define NL "\n" +#else +# define DBG(f,x...) ((void)0) +# define MAL_DBG(f,x...) ((void)0) +# define ZMII_DBG(f,x...) ((void)0) +# define RGMII_DBG(f,x...) ((void)0) +#endif +#if DBG_LEVEL > 1 +# define DBG2(f,x...) DBG(f, ##x) +# define MAL_DBG2(f,x...) MAL_DBG(f, ##x) +# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x) +# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x) +#else +# define DBG2(f,x...) ((void)0) +# define MAL_DBG2(f,x...) ((void)0) +# define ZMII_DBG2(f,x...) ((void)0) +# define RGMII_DBG2(f,x...) ((void)0) +#endif + +#endif /* __IBM_EMAC_DEBUG_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c index e59f57f363ca..da88d43081cc 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.c +++ b/drivers/net/ibm_emac/ibm_emac_mal.c @@ -1,436 +1,565 @@ /* - * ibm_ocp_mal.c + * drivers/net/ibm_emac/ibm_emac_mal.c * - * Armin Kuster akuster@mvista.com - * Juen, 2002 + * Memory Access Layer (MAL) support + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Copyright 2002 MontaVista Softare Inc. + * Based on original work by + * Benjamin Herrenschmidt , + * David Gibson , + * + * Armin Kuster + * Copyright 2002 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - #include #include #include #include #include #include +#include #include -#include -#include #include +#include "ibm_emac_core.h" #include "ibm_emac_mal.h" +#include "ibm_emac_debug.h" -// Locking: Should we share a lock with the client ? The client could provide -// a lock pointer (optionally) in the commac structure... I don't think this is -// really necessary though - -/* This lock protects the commac list. On today UP implementations, it's - * really only used as IRQ protection in mal_{register,unregister}_commac() - */ -static DEFINE_RWLOCK(mal_list_lock); - -int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) +int __init mal_register_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) { unsigned long flags; + local_irq_save(flags); - write_lock_irqsave(&mal_list_lock, flags); + MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index, + commac->tx_chan_mask, commac->rx_chan_mask); - /* Don't let multiple commacs claim the same channel */ + /* Don't let multiple commacs claim the same channel(s) */ if ((mal->tx_chan_mask & commac->tx_chan_mask) || (mal->rx_chan_mask & commac->rx_chan_mask)) { - write_unlock_irqrestore(&mal_list_lock, flags); + local_irq_restore(flags); + printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", + mal->def->index); return -EBUSY; } mal->tx_chan_mask |= commac->tx_chan_mask; mal->rx_chan_mask |= commac->rx_chan_mask; + list_add(&commac->list, &mal->list); - list_add(&commac->list, &mal->commac); - - write_unlock_irqrestore(&mal_list_lock, flags); - + local_irq_restore(flags); return 0; } -int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) +void __exit mal_unregister_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) { unsigned long flags; + local_irq_save(flags); - write_lock_irqsave(&mal_list_lock, flags); + MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index, + commac->tx_chan_mask, commac->rx_chan_mask); mal->tx_chan_mask &= ~commac->tx_chan_mask; mal->rx_chan_mask &= ~commac->rx_chan_mask; - list_del_init(&commac->list); - write_unlock_irqrestore(&mal_list_lock, flags); - - return 0; + local_irq_restore(flags); } int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size) { - switch (channel) { - case 0: - set_mal_dcrn(mal, DCRN_MALRCBS0, size); - break; -#ifdef DCRN_MALRCBS1 - case 1: - set_mal_dcrn(mal, DCRN_MALRCBS1, size); - break; -#endif -#ifdef DCRN_MALRCBS2 - case 2: - set_mal_dcrn(mal, DCRN_MALRCBS2, size); - break; -#endif -#ifdef DCRN_MALRCBS3 - case 3: - set_mal_dcrn(mal, DCRN_MALRCBS3, size); - break; -#endif - default: + struct ocp_func_mal_data *maldata = mal->def->additions; + BUG_ON(channel < 0 || channel >= maldata->num_rx_chans || + size > MAL_MAX_RX_SIZE); + + MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size); + + if (size & 0xf) { + printk(KERN_WARNING + "mal%d: incorrect RX size %lu for the channel %d\n", + mal->def->index, size, channel); return -EINVAL; } + set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4); return 0; } -static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs) +int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel) { - struct ibm_ocp_mal *mal = dev_instance; - unsigned long mal_error; + struct ocp_func_mal_data *maldata = mal->def->additions; + BUG_ON(channel < 0 || channel >= maldata->num_tx_chans); + return channel * NUM_TX_BUFF; +} - /* - * This SERR applies to one of the devices on the MAL, here we charge - * it against the first EMAC registered for the MAL. - */ +int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel) +{ + struct ocp_func_mal_data *maldata = mal->def->additions; + BUG_ON(channel < 0 || channel >= maldata->num_rx_chans); + return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF; +} - mal_error = get_mal_dcrn(mal, DCRN_MALESR); +void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel) +{ + local_bh_disable(); + MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel); + set_mal_dcrn(mal, MAL_TXCASR, + get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel)); + local_bh_enable(); +} - printk(KERN_ERR "%s: System Error (MALESR=%lx)\n", - "MAL" /* FIXME: get the name right */ , mal_error); +void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel) +{ + set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel)); + MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel); +} - /* FIXME: decipher error */ - /* DIXME: distribute to commacs, if possible */ +void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel) +{ + local_bh_disable(); + MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel); + set_mal_dcrn(mal, MAL_RXCASR, + get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel)); + local_bh_enable(); +} - /* Clear the error status register */ - set_mal_dcrn(mal, DCRN_MALESR, mal_error); +void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel) +{ + set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel)); + MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel); +} - return IRQ_HANDLED; +void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac) +{ + local_bh_disable(); + MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac); + list_add_tail(&commac->poll_list, &mal->poll_list); + local_bh_enable(); } -static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs) +void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac) +{ + local_bh_disable(); + MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac); + list_del(&commac->poll_list); + local_bh_enable(); +} + +/* synchronized by mal_poll() */ +static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal) +{ + MAL_DBG2("%d: enable_irq" NL, mal->def->index); + set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE); +} + +/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */ +static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal) +{ + set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE); + MAL_DBG2("%d: disable_irq" NL, mal->def->index); +} + +static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs) { struct ibm_ocp_mal *mal = dev_instance; - struct list_head *l; - unsigned long isr; + u32 esr = get_mal_dcrn(mal, MAL_ESR); - isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR); - set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr); + /* Clear the error status register */ + set_mal_dcrn(mal, MAL_ESR, esr); - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); + MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr); - if (isr & mc->tx_chan_mask) { - mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask); + if (esr & MAL_ESR_EVB) { + if (esr & MAL_ESR_DE) { + /* We ignore Descriptor error, + * TXDE or RXDE interrupt will be generated anyway. + */ + return IRQ_HANDLED; } + + if (esr & MAL_ESR_PEIN) { + /* PLB error, it's probably buggy hardware or + * incorrect physical address in BD (i.e. bug) + */ + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: system error, PLB (ESR = 0x%08x)\n", + mal->def->index, esr); + return IRQ_HANDLED; + } + + /* OPB error, it's probably buggy hardware or incorrect EBC setup */ + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: system error, OPB (ESR = 0x%08x)\n", + mal->def->index, esr); } - read_unlock(&mal_list_lock); + return IRQ_HANDLED; +} + +static inline void mal_schedule_poll(struct ibm_ocp_mal *mal) +{ + if (likely(netif_rx_schedule_prep(&mal->poll_dev))) { + MAL_DBG2("%d: schedule_poll" NL, mal->def->index); + mal_disable_eob_irq(mal); + __netif_rx_schedule(&mal->poll_dev); + } else + MAL_DBG2("%d: already in poll" NL, mal->def->index); +} +static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + u32 r = get_mal_dcrn(mal, MAL_TXEOBISR); + MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r); + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_TXEOBISR, r); return IRQ_HANDLED; } static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs) { struct ibm_ocp_mal *mal = dev_instance; - struct list_head *l; - unsigned long isr; + u32 r = get_mal_dcrn(mal, MAL_RXEOBISR); + MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r); + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_RXEOBISR, r); + return IRQ_HANDLED; +} - isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR); - set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr); +static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + u32 deir = get_mal_dcrn(mal, MAL_TXDEIR); + set_mal_dcrn(mal, MAL_TXDEIR, deir); - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); + MAL_DBG("%d: txde %08x" NL, mal->def->index, deir); - if (isr & mc->rx_chan_mask) { - mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask); - } - } - read_unlock(&mal_list_lock); + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n", + mal->def->index, deir); return IRQ_HANDLED; } -static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs) { struct ibm_ocp_mal *mal = dev_instance; struct list_head *l; - unsigned long deir; + u32 deir = get_mal_dcrn(mal, MAL_RXDEIR); - deir = get_mal_dcrn(mal, DCRN_MALTXDEIR); + MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir); - /* FIXME: print which MAL correctly */ - printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n", - "MAL", deir); - - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { + list_for_each(l, &mal->list) { struct mal_commac *mc = list_entry(l, struct mal_commac, list); - - if (deir & mc->tx_chan_mask) { - mc->ops->txde(mc->dev, deir & mc->tx_chan_mask); + if (deir & mc->rx_chan_mask) { + mc->rx_stopped = 1; + mc->ops->rxde(mc->dev); } } - read_unlock(&mal_list_lock); + + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_RXDEIR, deir); return IRQ_HANDLED; } -/* - * This interrupt should be very rare at best. This occurs when - * the hardware has a problem with the receive descriptors. The manual - * states that it occurs when the hardware cannot the receive descriptor - * empty bit is not set. The recovery mechanism will be to - * traverse through the descriptors, handle any that are marked to be - * handled and reinitialize each along the way. At that point the driver - * will be restarted. - */ -static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs) +static int mal_poll(struct net_device *ndev, int *budget) { - struct ibm_ocp_mal *mal = dev_instance; + struct ibm_ocp_mal *mal = ndev->priv; struct list_head *l; - unsigned long deir; - - deir = get_mal_dcrn(mal, DCRN_MALRXDEIR); + int rx_work_limit = min(ndev->quota, *budget), received = 0, done; + + MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget, + rx_work_limit); + again: + /* Process TX skbs */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + mc->ops->poll_tx(mc->dev); + } - /* - * This really is needed. This case encountered in stress testing. + /* Process RX skbs. + * We _might_ need something more smart here to enforce polling fairness. */ - if (deir == 0) - return IRQ_HANDLED; - - /* FIXME: print which MAL correctly */ - printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n", - "MAL", deir); - - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + int n = mc->ops->poll_rx(mc->dev, rx_work_limit); + if (n) { + received += n; + rx_work_limit -= n; + if (rx_work_limit <= 0) { + done = 0; + goto more_work; // XXX What if this is the last one ? + } + } + } - if (deir & mc->rx_chan_mask) { - mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask); + /* We need to disable IRQs to protect from RXDE IRQ here */ + local_irq_disable(); + __netif_rx_complete(ndev); + mal_enable_eob_irq(mal); + local_irq_enable(); + + done = 1; + + /* Check for "rotting" packet(s) */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) { + MAL_DBG2("%d: rotting packet" NL, mal->def->index); + if (netif_rx_reschedule(ndev, received)) + mal_disable_eob_irq(mal); + else + MAL_DBG2("%d: already in poll list" NL, + mal->def->index); + + if (rx_work_limit > 0) + goto again; + else + goto more_work; } + mc->ops->poll_tx(mc->dev); } - read_unlock(&mal_list_lock); - return IRQ_HANDLED; + more_work: + ndev->quota -= received; + *budget -= received; + + MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, *budget, + done ? 0 : 1); + return done ? 0 : 1; +} + +static void mal_reset(struct ibm_ocp_mal *mal) +{ + int n = 10; + MAL_DBG("%d: reset" NL, mal->def->index); + + set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR); + + /* Wait for reset to complete (1 system clock) */ + while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n) + --n; + + if (unlikely(!n)) + printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index); +} + +int mal_get_regs_len(struct ibm_ocp_mal *mal) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct ibm_mal_regs); +} + +void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf) +{ + struct emac_ethtool_regs_subhdr *hdr = buf; + struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1); + struct ocp_func_mal_data *maldata = mal->def->additions; + int i; + + hdr->version = MAL_VERSION; + hdr->index = mal->def->index; + + regs->tx_count = maldata->num_tx_chans; + regs->rx_count = maldata->num_rx_chans; + + regs->cfg = get_mal_dcrn(mal, MAL_CFG); + regs->esr = get_mal_dcrn(mal, MAL_ESR); + regs->ier = get_mal_dcrn(mal, MAL_IER); + regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR); + regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR); + regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR); + regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR); + regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR); + regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR); + regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR); + regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR); + + for (i = 0; i < regs->tx_count; ++i) + regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i)); + + for (i = 0; i < regs->rx_count; ++i) { + regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i)); + regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i)); + } + return regs + 1; } static int __init mal_probe(struct ocp_device *ocpdev) { - struct ibm_ocp_mal *mal = NULL; + struct ibm_ocp_mal *mal; struct ocp_func_mal_data *maldata; - int err = 0; + int err = 0, i, bd_size; + + MAL_DBG("%d: probe" NL, ocpdev->def->index); - maldata = (struct ocp_func_mal_data *)ocpdev->def->additions; + maldata = ocpdev->def->additions; if (maldata == NULL) { - printk(KERN_ERR "mal%d: Missing additional datas !\n", + printk(KERN_ERR "mal%d: missing additional data!\n", ocpdev->def->index); return -ENODEV; } - mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); - if (mal == NULL) { + mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); + if (!mal) { printk(KERN_ERR - "mal%d: Out of memory allocating MAL structure !\n", + "mal%d: out of memory allocating MAL structure!\n", ocpdev->def->index); return -ENOMEM; } - memset(mal, 0, sizeof(*mal)); - - switch (ocpdev->def->index) { - case 0: - mal->dcrbase = DCRN_MAL_BASE; - break; -#ifdef DCRN_MAL1_BASE - case 1: - mal->dcrbase = DCRN_MAL1_BASE; - break; -#endif - default: - BUG(); - } - - /**************************/ + mal->dcrbase = maldata->dcr_base; + mal->def = ocpdev->def; - INIT_LIST_HEAD(&mal->commac); + INIT_LIST_HEAD(&mal->poll_list); + set_bit(__LINK_STATE_START, &mal->poll_dev.state); + mal->poll_dev.weight = CONFIG_IBM_EMAC_POLL_WEIGHT; + mal->poll_dev.poll = mal_poll; + mal->poll_dev.priv = mal; + atomic_set(&mal->poll_dev.refcnt, 1); - set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF); - set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF); + INIT_LIST_HEAD(&mal->list); - set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */ - /* FIXME: Add delay */ + /* Load power-on reset defaults */ + mal_reset(mal); /* Set the MAL configuration register */ - set_mal_dcrn(mal, DCRN_MALCR, - MALCR_PLBB | MALCR_OPBBL | MALCR_LEA | - MALCR_PLBLT_DEFAULT); - - /* It would be nice to allocate buffers separately for each - * channel, but we can't because the channels share the upper - * 13 bits of address lines. Each channels buffer must also - * be 4k aligned, so we allocate 4k for each channel. This is - * inefficient FIXME: do better, if possible */ - mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev, - MAL_DT_ALIGN * - maldata->num_tx_chans, - &mal->tx_phys_addr, GFP_KERNEL); - if (mal->tx_virt_addr == NULL) { + set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB | + MAL_CFG_OPBBL | MAL_CFG_LEA); + + mal_enable_eob_irq(mal); + + /* Allocate space for BD rings */ + BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32); + BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32); + bd_size = sizeof(struct mal_descriptor) * + (NUM_TX_BUFF * maldata->num_tx_chans + + NUM_RX_BUFF * maldata->num_rx_chans); + mal->bd_virt = + dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL); + + if (!mal->bd_virt) { printk(KERN_ERR - "mal%d: Out of memory allocating MAL descriptors !\n", - ocpdev->def->index); + "mal%d: out of memory allocating RX/TX descriptors!\n", + mal->def->index); err = -ENOMEM; goto fail; } + memset(mal->bd_virt, 0, bd_size); - /* God, oh, god, I hate DCRs */ - set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr); -#ifdef DCRN_MALTXCTP1R - if (maldata->num_tx_chans > 1) - set_mal_dcrn(mal, DCRN_MALTXCTP1R, - mal->tx_phys_addr + MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP1R */ -#ifdef DCRN_MALTXCTP2R - if (maldata->num_tx_chans > 2) - set_mal_dcrn(mal, DCRN_MALTXCTP2R, - mal->tx_phys_addr + 2 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP2R */ -#ifdef DCRN_MALTXCTP3R - if (maldata->num_tx_chans > 3) - set_mal_dcrn(mal, DCRN_MALTXCTP3R, - mal->tx_phys_addr + 3 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP3R */ -#ifdef DCRN_MALTXCTP4R - if (maldata->num_tx_chans > 4) - set_mal_dcrn(mal, DCRN_MALTXCTP4R, - mal->tx_phys_addr + 4 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP4R */ -#ifdef DCRN_MALTXCTP5R - if (maldata->num_tx_chans > 5) - set_mal_dcrn(mal, DCRN_MALTXCTP5R, - mal->tx_phys_addr + 5 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP5R */ -#ifdef DCRN_MALTXCTP6R - if (maldata->num_tx_chans > 6) - set_mal_dcrn(mal, DCRN_MALTXCTP6R, - mal->tx_phys_addr + 6 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP6R */ -#ifdef DCRN_MALTXCTP7R - if (maldata->num_tx_chans > 7) - set_mal_dcrn(mal, DCRN_MALTXCTP7R, - mal->tx_phys_addr + 7 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP7R */ - - mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev, - MAL_DT_ALIGN * - maldata->num_rx_chans, - &mal->rx_phys_addr, GFP_KERNEL); - - set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr); -#ifdef DCRN_MALRXCTP1R - if (maldata->num_rx_chans > 1) - set_mal_dcrn(mal, DCRN_MALRXCTP1R, - mal->rx_phys_addr + MAL_DT_ALIGN); -#endif /* DCRN_MALRXCTP1R */ -#ifdef DCRN_MALRXCTP2R - if (maldata->num_rx_chans > 2) - set_mal_dcrn(mal, DCRN_MALRXCTP2R, - mal->rx_phys_addr + 2 * MAL_DT_ALIGN); -#endif /* DCRN_MALRXCTP2R */ -#ifdef DCRN_MALRXCTP3R - if (maldata->num_rx_chans > 3) - set_mal_dcrn(mal, DCRN_MALRXCTP3R, - mal->rx_phys_addr + 3 * MAL_DT_ALIGN); -#endif /* DCRN_MALRXCTP3R */ + for (i = 0; i < maldata->num_tx_chans; ++i) + set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma + + sizeof(struct mal_descriptor) * + mal_tx_bd_offset(mal, i)); + + for (i = 0; i < maldata->num_rx_chans; ++i) + set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma + + sizeof(struct mal_descriptor) * + mal_rx_bd_offset(mal, i)); err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal); if (err) - goto fail; - err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal); + goto fail2; + err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal); if (err) - goto fail; + goto fail3; err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); if (err) - goto fail; + goto fail4; err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); if (err) - goto fail; + goto fail5; err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); if (err) - goto fail; + goto fail6; - set_mal_dcrn(mal, DCRN_MALIER, - MALIER_DE | MALIER_NE | MALIER_TE | - MALIER_OPBE | MALIER_PLBE); + /* Enable all MAL SERR interrupt sources */ + set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS); - /* Advertise me to the rest of the world */ + /* Advertise this instance to the rest of the world */ ocp_set_drvdata(ocpdev, mal); - printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n", - ocpdev->def->index, maldata->num_tx_chans, - maldata->num_rx_chans); + mal_dbg_register(mal->def->index, mal); + printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n", + mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans); return 0; + fail6: + free_irq(maldata->rxde_irq, mal); + fail5: + free_irq(maldata->txeob_irq, mal); + fail4: + free_irq(maldata->txde_irq, mal); + fail3: + free_irq(maldata->serr_irq, mal); + fail2: + dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma); fail: - /* FIXME: dispose requested IRQs ! */ - if (err && mal) - kfree(mal); + kfree(mal); return err; } static void __exit mal_remove(struct ocp_device *ocpdev) { struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev); - struct ocp_func_mal_data *maldata = ocpdev->def->additions; + struct ocp_func_mal_data *maldata = mal->def->additions; + + MAL_DBG("%d: remove" NL, mal->def->index); - BUG_ON(!maldata); + /* Syncronize with scheduled polling, + stolen from net/core/dev.c:dev_close() + */ + clear_bit(__LINK_STATE_START, &mal->poll_dev.state); + netif_poll_disable(&mal->poll_dev); + + if (!list_empty(&mal->list)) { + /* This is *very* bad */ + printk(KERN_EMERG + "mal%d: commac list is not empty on remove!\n", + mal->def->index); + } ocp_set_drvdata(ocpdev, NULL); - /* FIXME: shut down the MAL, deal with dependency with emac */ free_irq(maldata->serr_irq, mal); free_irq(maldata->txde_irq, mal); free_irq(maldata->txeob_irq, mal); free_irq(maldata->rxde_irq, mal); free_irq(maldata->rxeob_irq, mal); - if (mal->tx_virt_addr) - dma_free_coherent(&ocpdev->dev, - MAL_DT_ALIGN * maldata->num_tx_chans, - mal->tx_virt_addr, mal->tx_phys_addr); + mal_reset(mal); - if (mal->rx_virt_addr) - dma_free_coherent(&ocpdev->dev, - MAL_DT_ALIGN * maldata->num_rx_chans, - mal->rx_virt_addr, mal->rx_phys_addr); + mal_dbg_register(mal->def->index, NULL); + + dma_free_coherent(&ocpdev->dev, + sizeof(struct mal_descriptor) * + (NUM_TX_BUFF * maldata->num_tx_chans + + NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt, + mal->bd_dma); kfree(mal); } /* Structure for a device driver */ static struct ocp_device_id mal_ids[] = { - {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL}, - {.vendor = OCP_VENDOR_INVALID} + { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL }, + { .vendor = OCP_VENDOR_INVALID} }; static struct ocp_driver mal_driver = { @@ -441,23 +570,14 @@ static struct ocp_driver mal_driver = { .remove = mal_remove, }; -static int __init init_mals(void) +int __init mal_init(void) { - int rc; - - rc = ocp_register_driver(&mal_driver); - if (rc < 0) { - ocp_unregister_driver(&mal_driver); - return -ENODEV; - } - - return 0; + MAL_DBG(": init" NL); + return ocp_register_driver(&mal_driver); } -static void __exit exit_mals(void) +void __exit mal_exit(void) { + MAL_DBG(": exit" NL); ocp_unregister_driver(&mal_driver); } - -module_init(init_mals); -module_exit(exit_mals); diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h index dd9f0dabc6e0..15b0bdae26ac 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ b/drivers/net/ibm_emac/ibm_emac_mal.h @@ -1,131 +1,267 @@ -#ifndef _IBM_EMAC_MAL_H -#define _IBM_EMAC_MAL_H +/* + * drivers/net/ibm_emac/ibm_emac_mal.h + * + * Memory Access Layer (MAL) support + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Armin Kuster + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_EMAC_MAL_H_ +#define __IBM_EMAC_MAL_H_ +#include +#include #include +#include -#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */ +#include -#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan)) +/* + * These MAL "versions" probably aren't the real versions IBM uses for these + * MAL cores, I assigned them just to make #ifdefs in this file nicer and + * reflect the fact that 40x and 44x have slightly different MALs. --ebs + */ +#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \ + defined(CONFIG_440EP) || defined(CONFIG_NP405H) +#define MAL_VERSION 1 +#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) +#define MAL_VERSION 2 +#else +#error "Unknown SoC, please check chip manual and choose MAL 'version'" +#endif + +/* MALx DCR registers */ +#define MAL_CFG 0x00 +#define MAL_CFG_SR 0x80000000 +#define MAL_CFG_PLBB 0x00004000 +#define MAL_CFG_OPBBL 0x00000080 +#define MAL_CFG_EOPIE 0x00000004 +#define MAL_CFG_LEA 0x00000002 +#define MAL_CFG_SD 0x00000001 +#if MAL_VERSION == 1 +#define MAL_CFG_PLBP_MASK 0x00c00000 +#define MAL_CFG_PLBP_10 0x00800000 +#define MAL_CFG_GA 0x00200000 +#define MAL_CFG_OA 0x00100000 +#define MAL_CFG_PLBLE 0x00080000 +#define MAL_CFG_PLBT_MASK 0x00078000 +#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK) +#elif MAL_VERSION == 2 +#define MAL_CFG_RPP_MASK 0x00c00000 +#define MAL_CFG_RPP_10 0x00800000 +#define MAL_CFG_RMBS_MASK 0x00300000 +#define MAL_CFG_WPP_MASK 0x000c0000 +#define MAL_CFG_WPP_10 0x00080000 +#define MAL_CFG_WMBS_MASK 0x00030000 +#define MAL_CFG_PLBLE 0x00008000 +#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \ + MAL_CFG_RPP_10 | MAL_CFG_WPP_10) +#else +#error "Unknown MAL version" +#endif + +#define MAL_ESR 0x01 +#define MAL_ESR_EVB 0x80000000 +#define MAL_ESR_CIDT 0x40000000 +#define MAL_ESR_CID_MASK 0x3e000000 +#define MAL_ESR_CID_SHIFT 25 +#define MAL_ESR_DE 0x00100000 +#define MAL_ESR_OTE 0x00040000 +#define MAL_ESR_OSE 0x00020000 +#define MAL_ESR_PEIN 0x00010000 +#define MAL_ESR_DEI 0x00000010 +#define MAL_ESR_OTEI 0x00000004 +#define MAL_ESR_OSEI 0x00000002 +#define MAL_ESR_PBEI 0x00000001 +#if MAL_VERSION == 1 +#define MAL_ESR_ONE 0x00080000 +#define MAL_ESR_ONEI 0x00000008 +#elif MAL_VERSION == 2 +#define MAL_ESR_PTE 0x00800000 +#define MAL_ESR_PRE 0x00400000 +#define MAL_ESR_PWE 0x00200000 +#define MAL_ESR_PTEI 0x00000080 +#define MAL_ESR_PREI 0x00000040 +#define MAL_ESR_PWEI 0x00000020 +#else +#error "Unknown MAL version" +#endif + +#define MAL_IER 0x02 +#define MAL_IER_DE 0x00000010 +#define MAL_IER_OTE 0x00000004 +#define MAL_IER_OE 0x00000002 +#define MAL_IER_PE 0x00000001 +#if MAL_VERSION == 1 +#define MAL_IER_NWE 0x00000008 +#define MAL_IER_SOC_EVENTS MAL_IER_NWE +#elif MAL_VERSION == 2 +#define MAL_IER_PT 0x00000080 +#define MAL_IER_PRE 0x00000040 +#define MAL_IER_PWE 0x00000020 +#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE) +#else +#error "Unknown MAL version" +#endif +#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \ + MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) + +#define MAL_TXCASR 0x04 +#define MAL_TXCARR 0x05 +#define MAL_TXEOBISR 0x06 +#define MAL_TXDEIR 0x07 +#define MAL_RXCASR 0x10 +#define MAL_RXCARR 0x11 +#define MAL_RXEOBISR 0x12 +#define MAL_RXDEIR 0x13 +#define MAL_TXCTPR(n) ((n) + 0x20) +#define MAL_RXCTPR(n) ((n) + 0x40) +#define MAL_RCBS(n) ((n) + 0x60) + +/* In reality MAL can handle TX buffers up to 4095 bytes long, + * but this isn't a good round number :) --ebs + */ +#define MAL_MAX_TX_SIZE 4080 +#define MAL_MAX_RX_SIZE 4080 + +static inline int mal_rx_size(int len) +{ + len = (len + 0xf) & ~0xf; + return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len; +} + +static inline int mal_tx_chunks(int len) +{ + return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE; +} + +#define MAL_CHAN_MASK(n) (0x80000000 >> (n)) /* MAL Buffer Descriptor structure */ struct mal_descriptor { - unsigned short ctrl; /* MAL / Commac status control bits */ - short data_len; /* Max length is 4K-1 (12 bits) */ - unsigned char *data_ptr; /* pointer to actual data buffer */ -} __attribute__ ((packed)); + u16 ctrl; /* MAL / Commac status control bits */ + u16 data_len; /* Max length is 4K-1 (12 bits) */ + u32 data_ptr; /* pointer to actual data buffer */ +}; /* the following defines are for the MadMAL status and control registers. */ /* MADMAL transmit and receive status/control bits */ -#define MAL_RX_CTRL_EMPTY 0x8000 -#define MAL_RX_CTRL_WRAP 0x4000 -#define MAL_RX_CTRL_CM 0x2000 -#define MAL_RX_CTRL_LAST 0x1000 -#define MAL_RX_CTRL_FIRST 0x0800 -#define MAL_RX_CTRL_INTR 0x0400 - -#define MAL_TX_CTRL_READY 0x8000 -#define MAL_TX_CTRL_WRAP 0x4000 -#define MAL_TX_CTRL_CM 0x2000 -#define MAL_TX_CTRL_LAST 0x1000 -#define MAL_TX_CTRL_INTR 0x0400 +#define MAL_RX_CTRL_EMPTY 0x8000 +#define MAL_RX_CTRL_WRAP 0x4000 +#define MAL_RX_CTRL_CM 0x2000 +#define MAL_RX_CTRL_LAST 0x1000 +#define MAL_RX_CTRL_FIRST 0x0800 +#define MAL_RX_CTRL_INTR 0x0400 +#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST) +#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE) + +#define MAL_TX_CTRL_READY 0x8000 +#define MAL_TX_CTRL_WRAP 0x4000 +#define MAL_TX_CTRL_CM 0x2000 +#define MAL_TX_CTRL_LAST 0x1000 +#define MAL_TX_CTRL_INTR 0x0400 struct mal_commac_ops { - void (*txeob) (void *dev, u32 chanmask); - void (*txde) (void *dev, u32 chanmask); - void (*rxeob) (void *dev, u32 chanmask); - void (*rxde) (void *dev, u32 chanmask); + void (*poll_tx) (void *dev); + int (*poll_rx) (void *dev, int budget); + int (*peek_rx) (void *dev); + void (*rxde) (void *dev); }; struct mal_commac { - struct mal_commac_ops *ops; - void *dev; - u32 tx_chan_mask, rx_chan_mask; - struct list_head list; + struct mal_commac_ops *ops; + void *dev; + struct list_head poll_list; + int rx_stopped; + + u32 tx_chan_mask; + u32 rx_chan_mask; + struct list_head list; }; struct ibm_ocp_mal { - int dcrbase; + int dcrbase; - struct list_head commac; - u32 tx_chan_mask, rx_chan_mask; + struct list_head poll_list; + struct net_device poll_dev; - dma_addr_t tx_phys_addr; - struct mal_descriptor *tx_virt_addr; + struct list_head list; + u32 tx_chan_mask; + u32 rx_chan_mask; - dma_addr_t rx_phys_addr; - struct mal_descriptor *rx_virt_addr; -}; + dma_addr_t bd_dma; + struct mal_descriptor *bd_virt; -#define GET_MAL_STANZA(base,dcrn) \ - case base: \ - x = mfdcr(dcrn(base)); \ - break; - -#define SET_MAL_STANZA(base,dcrn, val) \ - case base: \ - mtdcr(dcrn(base), (val)); \ - break; - -#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn) -#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val) - -#ifdef DCRN_MAL1_BASE -#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn) -#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val) -#else /* ! DCRN_MAL1_BASE */ -#define GET_MAL1_STANZA(dcrn) -#define SET_MAL1_STANZA(dcrn,val) -#endif + struct ocp_def *def; +}; -#define get_mal_dcrn(mal, dcrn) ({ \ - u32 x; \ - switch ((mal)->dcrbase) { \ - GET_MAL0_STANZA(dcrn) \ - GET_MAL1_STANZA(dcrn) \ - default: \ - x = 0; \ - BUG(); \ - } \ -x; }) - -#define set_mal_dcrn(mal, dcrn, val) do { \ - switch ((mal)->dcrbase) { \ - SET_MAL0_STANZA(dcrn,val) \ - SET_MAL1_STANZA(dcrn,val) \ - default: \ - BUG(); \ - } } while (0) - -static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask) +static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg) { - set_mal_dcrn(mal, DCRN_MALTXCASR, - get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask); + return mfdcr(mal->dcrbase + reg); } -static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal, - u32 chanmask) +static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val) { - set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask); + mtdcr(mal->dcrbase + reg, val); } -static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask) -{ - set_mal_dcrn(mal, DCRN_MALRXCASR, - get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask); -} +/* Register MAL devices */ +int mal_init(void) __init; +void mal_exit(void) __exit; -static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal, - u32 chanmask) -{ - set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask); -} +int mal_register_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) __init; +void mal_unregister_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) __exit; +int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size); + +/* Returns BD ring offset for a particular channel + (in 'struct mal_descriptor' elements) +*/ +int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel); +int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel); + +void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel); +void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel); +void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel); +void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel); -extern int mal_register_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac); -extern int mal_unregister_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac); +/* Add/remove EMAC to/from MAL polling list */ +void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac); +void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac); + +/* Ethtool MAL registers */ +struct ibm_mal_regs { + u32 tx_count; + u32 rx_count; + + u32 cfg; + u32 esr; + u32 ier; + u32 tx_casr; + u32 tx_carr; + u32 tx_eobisr; + u32 tx_deir; + u32 rx_casr; + u32 rx_carr; + u32 rx_eobisr; + u32 rx_deir; + u32 tx_ctpr[32]; + u32 rx_ctpr[32]; + u32 rcbs[32]; +}; -extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, - unsigned long size); +int mal_get_regs_len(struct ibm_ocp_mal *mal); +void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf); -#endif /* _IBM_EMAC_MAL_H */ +#endif /* __IBM_EMAC_MAL_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c index 14213f090e91..a27e49cfe43b 100644 --- a/drivers/net/ibm_emac/ibm_emac_phy.c +++ b/drivers/net/ibm_emac/ibm_emac_phy.c @@ -1,96 +1,80 @@ /* - * ibm_ocp_phy.c + * drivers/net/ibm_emac/ibm_emac_phy.c * - * PHY drivers for the ibm ocp ethernet driver. Borrowed - * from sungem_phy.c, though I only kept the generic MII + * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. + * Borrowed from sungem_phy.c, though I only kept the generic MII * driver for now. * * This file should be shared with other drivers or eventually * merged as the "low level" part of miilib * * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) + * (c) 2004-2005, Eugene Surovegin * */ - #include - #include - #include -#include #include #include -#include #include #include #include +#include + #include "ibm_emac_phy.h" -static int reset_one_mii_phy(struct mii_phy *phy, int phy_id) +static inline int phy_read(struct mii_phy *phy, int reg) +{ + return phy->mdio_read(phy->dev, phy->address, reg); +} + +static inline void phy_write(struct mii_phy *phy, int reg, int val) { - u16 val; + phy->mdio_write(phy->dev, phy->address, reg, val); +} + +int mii_reset_phy(struct mii_phy *phy) +{ + int val; int limit = 10000; - val = __phy_read(phy, phy_id, MII_BMCR); + val = phy_read(phy, MII_BMCR); val &= ~BMCR_ISOLATE; val |= BMCR_RESET; - __phy_write(phy, phy_id, MII_BMCR, val); + phy_write(phy, MII_BMCR, val); - udelay(100); + udelay(300); while (limit--) { - val = __phy_read(phy, phy_id, MII_BMCR); - if ((val & BMCR_RESET) == 0) + val = phy_read(phy, MII_BMCR); + if (val >= 0 && (val & BMCR_RESET) == 0) break; udelay(10); } if ((val & BMCR_ISOLATE) && limit > 0) - __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE); - - return (limit <= 0); -} - -static int cis8201_init(struct mii_phy *phy) -{ - u16 epcr; - - epcr = phy_read(phy, MII_CIS8201_EPCR); - epcr &= ~EPCR_MODE_MASK; - - switch (phy->mode) { - case PHY_MODE_TBI: - epcr |= EPCR_TBI_MODE; - break; - case PHY_MODE_RTBI: - epcr |= EPCR_RTBI_MODE; - break; - case PHY_MODE_GMII: - epcr |= EPCR_GMII_MODE; - break; - case PHY_MODE_RGMII: - default: - epcr |= EPCR_RGMII_MODE; - } + phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); - phy_write(phy, MII_CIS8201_EPCR, epcr); - - return 0; + return limit <= 0; } static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) { - u16 ctl, adv; + int ctl, adv; - phy->autoneg = 1; + phy->autoneg = AUTONEG_ENABLE; phy->speed = SPEED_10; phy->duplex = DUPLEX_HALF; - phy->pause = 0; + phy->pause = phy->asym_pause = 0; phy->advertising = advertise; /* Setup standard advertise */ adv = phy_read(phy, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (adv < 0) + return adv; + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; if (advertise & ADVERTISED_10baseT_Full) @@ -99,8 +83,25 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; + if (advertise & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; phy_write(phy, MII_ADVERTISE, adv); + if (phy->features & + (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { + adv = phy_read(phy, MII_CTRL1000); + if (adv < 0) + return adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (advertise & ADVERTISED_1000baseT_Full) + adv |= ADVERTISE_1000FULL; + if (advertise & ADVERTISED_1000baseT_Half) + adv |= ADVERTISE_1000HALF; + phy_write(phy, MII_CTRL1000, adv); + } + /* Start/Restart aneg */ ctl = phy_read(phy, MII_BMCR); ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); @@ -111,14 +112,16 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) { - u16 ctl; + int ctl; - phy->autoneg = 0; + phy->autoneg = AUTONEG_DISABLE; phy->speed = speed; phy->duplex = fd; - phy->pause = 0; + phy->pause = phy->asym_pause = 0; ctl = phy_read(phy, MII_BMCR); + if (ctl < 0) + return ctl; ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE); /* First reset the PHY */ @@ -132,6 +135,8 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) ctl |= BMCR_SPEED100; break; case SPEED_1000: + ctl |= BMCR_SPEED1000; + break; default: return -EINVAL; } @@ -144,112 +149,143 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) static int genmii_poll_link(struct mii_phy *phy) { - u16 status; + int status; - (void)phy_read(phy, MII_BMSR); + /* Clear latched value with dummy read */ + phy_read(phy, MII_BMSR); status = phy_read(phy, MII_BMSR); - if ((status & BMSR_LSTATUS) == 0) + if (status < 0 || (status & BMSR_LSTATUS) == 0) return 0; - if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE)) + if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) return 0; return 1; } -#define MII_CIS8201_ACSR 0x1c -#define ACSR_DUPLEX_STATUS 0x0020 -#define ACSR_SPEED_1000BASET 0x0010 -#define ACSR_SPEED_100BASET 0x0008 - -static int cis8201_read_link(struct mii_phy *phy) +static int genmii_read_link(struct mii_phy *phy) { - u16 acsr; + if (phy->autoneg == AUTONEG_ENABLE) { + int glpa = 0; + int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); + if (lpa < 0) + return lpa; + + if (phy->features & + (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { + int adv = phy_read(phy, MII_CTRL1000); + glpa = phy_read(phy, MII_STAT1000); + + if (glpa < 0 || adv < 0) + return adv; + + glpa &= adv << 2; + } + + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + + if (glpa & (LPA_1000FULL | LPA_1000HALF)) { + phy->speed = SPEED_1000; + if (glpa & LPA_1000FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phy->speed = SPEED_100; + if (lpa & LPA_100FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & LPA_10FULL) + phy->duplex = DUPLEX_FULL; - if (phy->autoneg) { - acsr = phy_read(phy, MII_CIS8201_ACSR); + if (phy->duplex == DUPLEX_FULL) { + phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phy, MII_BMCR); + if (bmcr < 0) + return bmcr; - if (acsr & ACSR_DUPLEX_STATUS) + if (bmcr & BMCR_FULLDPLX) phy->duplex = DUPLEX_FULL; else phy->duplex = DUPLEX_HALF; - if (acsr & ACSR_SPEED_1000BASET) { + if (bmcr & BMCR_SPEED1000) phy->speed = SPEED_1000; - } else if (acsr & ACSR_SPEED_100BASET) + else if (bmcr & BMCR_SPEED100) phy->speed = SPEED_100; else phy->speed = SPEED_10; - phy->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ + phy->pause = phy->asym_pause = 0; + } return 0; } -static int genmii_read_link(struct mii_phy *phy) +/* Generic implementation for most 10/100/1000 PHYs */ +static struct mii_phy_ops generic_phy_ops = { + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link +}; + +static struct mii_phy_def genmii_phy_def = { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .ops = &generic_phy_ops +}; + +/* CIS8201 */ +#define MII_CIS8201_EPCR 0x17 +#define EPCR_MODE_MASK 0x3000 +#define EPCR_GMII_MODE 0x0000 +#define EPCR_RGMII_MODE 0x1000 +#define EPCR_TBI_MODE 0x2000 +#define EPCR_RTBI_MODE 0x3000 + +static int cis8201_init(struct mii_phy *phy) { - u16 lpa; + int epcr; - if (phy->autoneg) { - lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); + epcr = phy_read(phy, MII_CIS8201_EPCR); + if (epcr < 0) + return epcr; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = 0; + epcr &= ~EPCR_MODE_MASK; - if (lpa & (LPA_100FULL | LPA_100HALF)) { - phy->speed = SPEED_100; - if (lpa & LPA_100FULL) - phy->duplex = DUPLEX_FULL; - } else if (lpa & LPA_10FULL) - phy->duplex = DUPLEX_FULL; + switch (phy->mode) { + case PHY_MODE_TBI: + epcr |= EPCR_TBI_MODE; + break; + case PHY_MODE_RTBI: + epcr |= EPCR_RTBI_MODE; + break; + case PHY_MODE_GMII: + epcr |= EPCR_GMII_MODE; + break; + case PHY_MODE_RGMII: + default: + epcr |= EPCR_RGMII_MODE; } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ + + phy_write(phy, MII_CIS8201_EPCR, epcr); return 0; } -#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII) -#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full) - -/* CIS8201 phy ops */ static struct mii_phy_ops cis8201_phy_ops = { - init:cis8201_init, - setup_aneg:genmii_setup_aneg, - setup_forced:genmii_setup_forced, - poll_link:genmii_poll_link, - read_link:cis8201_read_link -}; - -/* Generic implementation for most 10/100 PHYs */ -static struct mii_phy_ops generic_phy_ops = { - setup_aneg:genmii_setup_aneg, - setup_forced:genmii_setup_forced, - poll_link:genmii_poll_link, - read_link:genmii_read_link + .init = cis8201_init, + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link }; static struct mii_phy_def cis8201_phy_def = { - phy_id:0x000fc410, - phy_id_mask:0x000ffff0, - name:"CIS8201 Gigabit Ethernet", - features:MII_GBIT_FEATURES, - magic_aneg:0, - ops:&cis8201_phy_ops -}; - -static struct mii_phy_def genmii_phy_def = { - phy_id:0x00000000, - phy_id_mask:0x00000000, - name:"Generic MII", - features:MII_BASIC_FEATURES, - magic_aneg:0, - ops:&generic_phy_ops + .phy_id = 0x000fc410, + .phy_id_mask = 0x000ffff0, + .name = "CIS8201 Gigabit Ethernet", + .ops = &cis8201_phy_ops }; static struct mii_phy_def *mii_phy_table[] = { @@ -258,39 +294,60 @@ static struct mii_phy_def *mii_phy_table[] = { NULL }; -int mii_phy_probe(struct mii_phy *phy, int mii_id) +int mii_phy_probe(struct mii_phy *phy, int address) { - int rc; - u32 id; struct mii_phy_def *def; int i; + u32 id; - phy->autoneg = 0; + phy->autoneg = AUTONEG_DISABLE; phy->advertising = 0; - phy->mii_id = mii_id; - phy->speed = 0; - phy->duplex = 0; - phy->pause = 0; - - /* Take PHY out of isloate mode and reset it. */ - rc = reset_one_mii_phy(phy, mii_id); - if (rc) + phy->address = address; + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + + /* Take PHY out of isolate mode and reset it. */ + if (mii_reset_phy(phy)) return -ENODEV; /* Read ID and find matching entry */ - id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2)) - & 0xfffffff0; + id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); for (i = 0; (def = mii_phy_table[i]) != NULL; i++) if ((id & def->phy_id_mask) == def->phy_id) break; /* Should never be NULL (we have a generic entry), but... */ - if (def == NULL) + if (!def) return -ENODEV; phy->def = def; + /* Determine PHY features if needed */ + phy->features = def->features; + if (!phy->features) { + u16 bmsr = phy_read(phy, MII_BMSR); + if (bmsr & BMSR_ANEGCAPABLE) + phy->features |= SUPPORTED_Autoneg; + if (bmsr & BMSR_10HALF) + phy->features |= SUPPORTED_10baseT_Half; + if (bmsr & BMSR_10FULL) + phy->features |= SUPPORTED_10baseT_Full; + if (bmsr & BMSR_100HALF) + phy->features |= SUPPORTED_100baseT_Half; + if (bmsr & BMSR_100FULL) + phy->features |= SUPPORTED_100baseT_Full; + if (bmsr & BMSR_ESTATEN) { + u16 esr = phy_read(phy, MII_ESTATUS); + if (esr & ESTATUS_1000_TFULL) + phy->features |= SUPPORTED_1000baseT_Full; + if (esr & ESTATUS_1000_THALF) + phy->features |= SUPPORTED_1000baseT_Half; + } + phy->features |= SUPPORTED_MII; + } + /* Setup default advertising */ - phy->advertising = def->features; + phy->advertising = phy->features; return 0; } diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h index 61afbea96563..a70e0fea54c4 100644 --- a/drivers/net/ibm_emac/ibm_emac_phy.h +++ b/drivers/net/ibm_emac/ibm_emac_phy.h @@ -1,65 +1,25 @@ - /* - * ibm_emac_phy.h - * + * drivers/net/ibm_emac/ibm_emac_phy.h * - * Benjamin Herrenschmidt - * February 2003 + * Driver for PowerPC 4xx on-chip ethernet controller, PHY support * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Benjamin Herrenschmidt + * February 2003 * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * Minor additions by Eugene Surovegin , 2004 * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * * This file basically duplicates sungem_phy.{c,h} with different PHYs * supported. I'm looking into merging that in a single mii layer more * flexible than mii.c */ -#ifndef _IBM_EMAC_PHY_H_ -#define _IBM_EMAC_PHY_H_ - -/* - * PHY mode settings - * Used for multi-mode capable PHYs - */ -#define PHY_MODE_NA 0 -#define PHY_MODE_MII 1 -#define PHY_MODE_RMII 2 -#define PHY_MODE_SMII 3 -#define PHY_MODE_RGMII 4 -#define PHY_MODE_TBI 5 -#define PHY_MODE_GMII 6 -#define PHY_MODE_RTBI 7 -#define PHY_MODE_SGMII 8 - -/* - * PHY specific registers/values - */ - -/* CIS8201 */ -#define MII_CIS8201_EPCR 0x17 -#define EPCR_MODE_MASK 0x3000 -#define EPCR_GMII_MODE 0x0000 -#define EPCR_RGMII_MODE 0x1000 -#define EPCR_TBI_MODE 0x2000 -#define EPCR_RTBI_MODE 0x3000 +#ifndef _IBM_OCP_PHY_H_ +#define _IBM_OCP_PHY_H_ struct mii_phy; @@ -77,7 +37,8 @@ struct mii_phy_ops { struct mii_phy_def { u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ u32 phy_id_mask; /* Significant bits */ - u32 features; /* Ethtool SUPPORTED_* defines */ + u32 features; /* Ethtool SUPPORTED_* defines or + 0 for autodetect */ int magic_aneg; /* Autoneg does all speed test for us */ const char *name; const struct mii_phy_ops *ops; @@ -86,8 +47,11 @@ struct mii_phy_def { /* An instance of a PHY, partially borrowed from mii_if_info */ struct mii_phy { struct mii_phy_def *def; - int advertising; - int mii_id; + u32 advertising; /* Ethtool ADVERTISED_* defines */ + u32 features; /* Copied from mii_phy_def.features + or determined automaticaly */ + int address; /* PHY address */ + int mode; /* PHY mode */ /* 1: autoneg enabled, 0: disabled */ int autoneg; @@ -98,40 +62,19 @@ struct mii_phy { int speed; int duplex; int pause; - - /* PHY mode - if needed */ - int mode; + int asym_pause; /* Provided by host chip */ struct net_device *dev; - int (*mdio_read) (struct net_device * dev, int mii_id, int reg); - void (*mdio_write) (struct net_device * dev, int mii_id, int reg, + int (*mdio_read) (struct net_device * dev, int addr, int reg); + void (*mdio_write) (struct net_device * dev, int addr, int reg, int val); }; /* Pass in a struct mii_phy with dev, mdio_read and mdio_write * filled, the remaining fields will be filled on return */ -extern int mii_phy_probe(struct mii_phy *phy, int mii_id); - -static inline int __phy_read(struct mii_phy *phy, int id, int reg) -{ - return phy->mdio_read(phy->dev, id, reg); -} - -static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val) -{ - phy->mdio_write(phy->dev, id, reg, val); -} - -static inline int phy_read(struct mii_phy *phy, int reg) -{ - return phy->mdio_read(phy->dev, phy->mii_id, reg); -} - -static inline void phy_write(struct mii_phy *phy, int reg, int val) -{ - phy->mdio_write(phy->dev, phy->mii_id, reg, val); -} +int mii_phy_probe(struct mii_phy *phy, int address); +int mii_reset_phy(struct mii_phy *phy); -#endif /* _IBM_EMAC_PHY_H_ */ +#endif /* _IBM_OCP_PHY_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c new file mode 100644 index 000000000000..f0b1ffb2dbbf --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c @@ -0,0 +1,201 @@ +/* + * drivers/net/ibm_emac/ibm_emac_rgmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Matt Porter + * Copyright 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include + +#include "ibm_emac_core.h" +#include "ibm_emac_debug.h" + +/* RGMIIx_FER */ +#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) +#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) +#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) +#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) +#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) + +/* RGMIIx_SSR */ +#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) +#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) +#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) + +/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ +static inline int rgmii_valid_mode(int phy_mode) +{ + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} + +static inline const char *rgmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_RGMII: + return "RGMII"; + case PHY_MODE_TBI: + return "TBI"; + case PHY_MODE_GMII: + return "GMII"; + case PHY_MODE_RTBI: + return "RTBI"; + default: + BUG(); + } +} + +static inline u32 rgmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_RGMII: + return RGMII_FER_RGMII(input); + case PHY_MODE_TBI: + return RGMII_FER_TBI(input); + case PHY_MODE_GMII: + return RGMII_FER_GMII(input); + case PHY_MODE_RTBI: + return RGMII_FER_RTBI(input); + default: + BUG(); + } +} + +static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + struct rgmii_regs *p; + + RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode); + + if (!dev) { + dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); + if (!dev) { + printk(KERN_ERR + "rgmii%d: couldn't allocate device structure!\n", + ocpdev->def->index); + return -ENOMEM; + } + + p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr, + sizeof(struct rgmii_regs)); + if (!p) { + printk(KERN_ERR + "rgmii%d: could not ioremap device registers!\n", + ocpdev->def->index); + kfree(dev); + return -ENOMEM; + } + + dev->base = p; + ocp_set_drvdata(ocpdev, dev); + + /* Disable all inputs by default */ + out_be32(&p->fer, 0); + } else + p = dev->base; + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); + + printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", + ocpdev->def->index, input, rgmii_mode_name(mode)); + + ++dev->users; + return 0; +} + +int __init rgmii_attach(void *emac) +{ + struct ocp_enet_private *dev = emac; + struct ocp_func_emac_data *emacdata = dev->def->additions; + + /* Check if we need to attach to a RGMII */ + if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) { + dev->rgmii_input = emacdata->rgmii_mux; + dev->rgmii_dev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII, + emacdata->rgmii_idx); + if (!dev->rgmii_dev) { + printk(KERN_ERR "emac%d: unknown rgmii%d!\n", + dev->def->index, emacdata->rgmii_idx); + return -ENODEV; + } + if (rgmii_init + (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) { + printk(KERN_ERR + "emac%d: rgmii%d initialization failed!\n", + dev->def->index, emacdata->rgmii_idx); + return -ENODEV; + } + } + return 0; +} + +void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input); + + RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); + + if (speed == SPEED_1000) + ssr |= RGMII_SSR_1000(input); + else if (speed == SPEED_100) + ssr |= RGMII_SSR_100(input); + + out_be32(&dev->base->ssr, ssr); +} + +void __exit __rgmii_fini(struct ocp_device *ocpdev, int input) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + BUG_ON(!dev || dev->users == 0); + + RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); + + /* Disable this input */ + out_be32(&dev->base->fer, + in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input)); + + if (!--dev->users) { + /* Free everything if this is the last user */ + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)dev->base); + kfree(dev); + } +} + +int __rgmii_get_regs_len(struct ocp_device *ocpdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct rgmii_regs); +} + +void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = ocpdev->def->index; + memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); + return regs + 1; +} diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h index 49f188f4ea6e..a1ffb8a44fff 100644 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.h +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h @@ -1,5 +1,7 @@ /* - * Defines for the IBM RGMII bridge + * drivers/net/ibm_emac/ibm_emac_rgmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. * * Based on ocp_zmii.h/ibm_emac_zmii.h * Armin Kuster akuster@mvista.com @@ -7,6 +9,9 @@ * Copyright 2004 MontaVista Software, Inc. * Matt Porter * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -19,47 +24,42 @@ #include /* RGMII bridge */ -typedef struct rgmii_regs { +struct rgmii_regs { u32 fer; /* Function enable register */ u32 ssr; /* Speed select register */ -} rgmii_t; - -#define RGMII_INPUTS 4 +}; /* RGMII device */ struct ibm_ocp_rgmii { struct rgmii_regs *base; - int mode[RGMII_INPUTS]; int users; /* number of EMACs using this RGMII bridge */ }; -/* Fuctional Enable Reg */ -#define RGMII_FER_MASK(x) (0x00000007 << (4*x)) -#define RGMII_RTBI 0x00000004 -#define RGMII_RGMII 0x00000005 -#define RGMII_TBI 0x00000006 -#define RGMII_GMII 0x00000007 - -/* Speed Selection reg */ +#ifdef CONFIG_IBM_EMAC_RGMII +int rgmii_attach(void *emac) __init; -#define RGMII_SP2_100 0x00000002 -#define RGMII_SP2_1000 0x00000004 -#define RGMII_SP3_100 0x00000200 -#define RGMII_SP3_1000 0x00000400 +void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit; +static inline void rgmii_fini(struct ocp_device *ocpdev, int input) +{ + if (ocpdev) + __rgmii_fini(ocpdev, input); +} -#define RGMII_MII2_SPDMASK 0x00000007 -#define RGMII_MII3_SPDMASK 0x00000700 +void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed); -#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000 -#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100 -#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000) -#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000 -#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100 -#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000) +int __rgmii_get_regs_len(struct ocp_device *ocpdev); +static inline int rgmii_get_regs_len(struct ocp_device *ocpdev) +{ + return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0; +} -#define RTBI 0 -#define RGMII 1 -#define TBI 2 -#define GMII 3 +void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf); +#else +# define rgmii_attach(x) 0 +# define rgmii_fini(x,y) ((void)0) +# define rgmii_set_speed(x,y,z) ((void)0) +# define rgmii_get_regs_len(x) 0 +# define rgmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_EMAC_RGMII */ #endif /* _IBM_EMAC_RGMII_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c new file mode 100644 index 000000000000..af08afc22f9f --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_tah.c @@ -0,0 +1,111 @@ +/* + * drivers/net/ibm_emac/ibm_emac_tah.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter + * + * Copyright (c) 2005 Eugene Surovegin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include + +#include "ibm_emac_core.h" + +static int __init tah_init(struct ocp_device *ocpdev) +{ + struct tah_regs *p; + + if (ocp_get_drvdata(ocpdev)) { + printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index); + return -EBUSY; + } + + /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */ + p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p)); + if (!p) { + printk(KERN_ERR "tah%d: could not ioremap device registers!\n", + ocpdev->def->index); + return -ENOMEM; + } + ocp_set_drvdata(ocpdev, p); + __tah_reset(ocpdev); + + return 0; +} + +int __init tah_attach(void *emac) +{ + struct ocp_enet_private *dev = emac; + struct ocp_func_emac_data *emacdata = dev->def->additions; + + /* Check if we need to attach to a TAH */ + if (emacdata->tah_idx >= 0) { + dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, + emacdata->tah_idx); + if (!dev->tah_dev) { + printk(KERN_ERR "emac%d: unknown tah%d!\n", + dev->def->index, emacdata->tah_idx); + return -ENODEV; + } + if (tah_init(dev->tah_dev)) { + printk(KERN_ERR + "emac%d: tah%d initialization failed!\n", + dev->def->index, emacdata->tah_idx); + return -ENODEV; + } + } + return 0; +} + +void __exit __tah_fini(struct ocp_device *ocpdev) +{ + struct tah_regs *p = ocp_get_drvdata(ocpdev); + BUG_ON(!p); + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)p); +} + +void __tah_reset(struct ocp_device *ocpdev) +{ + struct tah_regs *p = ocp_get_drvdata(ocpdev); + int n; + + /* Reset TAH */ + out_be32(&p->mr, TAH_MR_SR); + n = 100; + while ((in_be32(&p->mr) & TAH_MR_SR) && n) + --n; + + if (unlikely(!n)) + printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index); + + /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ + out_be32(&p->mr, + TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | + TAH_MR_DIG); +} + +int __tah_get_regs_len(struct ocp_device *ocpdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct tah_regs); +} + +void *tah_dump_regs(struct ocp_device *ocpdev, void *buf) +{ + struct tah_regs *dev = ocp_get_drvdata(ocpdev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct tah_regs *regs = (struct tah_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = ocpdev->def->index; + memcpy_fromio(regs, dev, sizeof(struct tah_regs)); + return regs + 1; +} diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h index ecfc69805521..9299b5dd7eb1 100644 --- a/drivers/net/ibm_emac/ibm_emac_tah.h +++ b/drivers/net/ibm_emac/ibm_emac_tah.h @@ -1,9 +1,13 @@ /* - * Defines for the IBM TAH + * drivers/net/ibm_emac/ibm_emac_tah.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. * * Copyright 2004 MontaVista Software, Inc. * Matt Porter * + * Copyright (c) 2005 Eugene Surovegin + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -13,36 +17,72 @@ #ifndef _IBM_EMAC_TAH_H #define _IBM_EMAC_TAH_H +#include +#include +#include + /* TAH */ -typedef struct tah_regs { - u32 tah_revid; +struct tah_regs { + u32 revid; u32 pad[3]; - u32 tah_mr; - u32 tah_ssr0; - u32 tah_ssr1; - u32 tah_ssr2; - u32 tah_ssr3; - u32 tah_ssr4; - u32 tah_ssr5; - u32 tah_tsr; -} tah_t; + u32 mr; + u32 ssr0; + u32 ssr1; + u32 ssr2; + u32 ssr3; + u32 ssr4; + u32 ssr5; + u32 tsr; +}; /* TAH engine */ -#define TAH_MR_CVR 0x80000000 -#define TAH_MR_SR 0x40000000 -#define TAH_MR_ST_256 0x01000000 -#define TAH_MR_ST_512 0x02000000 -#define TAH_MR_ST_768 0x03000000 -#define TAH_MR_ST_1024 0x04000000 -#define TAH_MR_ST_1280 0x05000000 -#define TAH_MR_ST_1536 0x06000000 -#define TAH_MR_TFS_16KB 0x00000000 -#define TAH_MR_TFS_2KB 0x00200000 -#define TAH_MR_TFS_4KB 0x00400000 -#define TAH_MR_TFS_6KB 0x00600000 -#define TAH_MR_TFS_8KB 0x00800000 -#define TAH_MR_TFS_10KB 0x00a00000 -#define TAH_MR_DTFP 0x00100000 -#define TAH_MR_DIG 0x00080000 +#define TAH_MR_CVR 0x80000000 +#define TAH_MR_SR 0x40000000 +#define TAH_MR_ST_256 0x01000000 +#define TAH_MR_ST_512 0x02000000 +#define TAH_MR_ST_768 0x03000000 +#define TAH_MR_ST_1024 0x04000000 +#define TAH_MR_ST_1280 0x05000000 +#define TAH_MR_ST_1536 0x06000000 +#define TAH_MR_TFS_16KB 0x00000000 +#define TAH_MR_TFS_2KB 0x00200000 +#define TAH_MR_TFS_4KB 0x00400000 +#define TAH_MR_TFS_6KB 0x00600000 +#define TAH_MR_TFS_8KB 0x00800000 +#define TAH_MR_TFS_10KB 0x00a00000 +#define TAH_MR_DTFP 0x00100000 +#define TAH_MR_DIG 0x00080000 + +#ifdef CONFIG_IBM_EMAC_TAH +int tah_attach(void *emac) __init; + +void __tah_fini(struct ocp_device *ocpdev) __exit; +static inline void tah_fini(struct ocp_device *ocpdev) +{ + if (ocpdev) + __tah_fini(ocpdev); +} + +void __tah_reset(struct ocp_device *ocpdev); +static inline void tah_reset(struct ocp_device *ocpdev) +{ + if (ocpdev) + __tah_reset(ocpdev); +} + +int __tah_get_regs_len(struct ocp_device *ocpdev); +static inline int tah_get_regs_len(struct ocp_device *ocpdev) +{ + return ocpdev ? __tah_get_regs_len(ocpdev) : 0; +} + +void *tah_dump_regs(struct ocp_device *ocpdev, void *buf); +#else +# define tah_attach(x) 0 +# define tah_fini(x) ((void)0) +# define tah_reset(x) ((void)0) +# define tah_get_regs_len(x) 0 +# define tah_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_EMAC_TAH */ #endif /* _IBM_EMAC_TAH_H */ diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c new file mode 100644 index 000000000000..35c1185079ed --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_zmii.c @@ -0,0 +1,255 @@ +/* + * drivers/net/ibm_emac/ibm_emac_zmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Armin Kuster + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include + +#include "ibm_emac_core.h" +#include "ibm_emac_debug.h" + +/* ZMIIx_FER */ +#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) +#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ + ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) + +#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMIIx_SSR */ +#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMII only supports MII, RMII and SMII + * we also support autodetection for backward compatibility + */ +static inline int zmii_valid_mode(int mode) +{ + return mode == PHY_MODE_MII || + mode == PHY_MODE_RMII || + mode == PHY_MODE_SMII || + mode == PHY_MODE_NA; +} + +static inline const char *zmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_MII: + return "MII"; + case PHY_MODE_RMII: + return "RMII"; + case PHY_MODE_SMII: + return "SMII"; + default: + BUG(); + } +} + +static inline u32 zmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_MII: + return ZMII_FER_MII(input); + case PHY_MODE_RMII: + return ZMII_FER_RMII(input); + case PHY_MODE_SMII: + return ZMII_FER_SMII(input); + default: + return 0; + } +} + +static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + struct zmii_regs *p; + + ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode); + + if (!dev) { + dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); + if (!dev) { + printk(KERN_ERR + "zmii%d: couldn't allocate device structure!\n", + ocpdev->def->index); + return -ENOMEM; + } + dev->mode = PHY_MODE_NA; + + p = (struct zmii_regs *)ioremap(ocpdev->def->paddr, + sizeof(struct zmii_regs)); + if (!p) { + printk(KERN_ERR + "zmii%d: could not ioremap device registers!\n", + ocpdev->def->index); + kfree(dev); + return -ENOMEM; + } + dev->base = p; + ocp_set_drvdata(ocpdev, dev); + + /* We may need FER value for autodetection later */ + dev->fer_save = in_be32(&p->fer); + + /* Disable all inputs by default */ + out_be32(&p->fer, 0); + } else + p = dev->base; + + if (!zmii_valid_mode(*mode)) { + /* Probably an EMAC connected to RGMII, + * but it still may need ZMII for MDIO + */ + goto out; + } + + /* Autodetect ZMII mode if not specified. + * This is only for backward compatibility with the old driver. + * Please, always specify PHY mode in your board port to avoid + * any surprises. + */ + if (dev->mode == PHY_MODE_NA) { + if (*mode == PHY_MODE_NA) { + u32 r = dev->fer_save; + + ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL, + ocpdev->def->index, r); + + if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) + dev->mode = PHY_MODE_MII; + else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) + dev->mode = PHY_MODE_RMII; + else + dev->mode = PHY_MODE_SMII; + } else + dev->mode = *mode; + + printk(KERN_NOTICE "zmii%d: bridge in %s mode\n", + ocpdev->def->index, zmii_mode_name(dev->mode)); + } else { + /* All inputs must use the same mode */ + if (*mode != PHY_MODE_NA && *mode != dev->mode) { + printk(KERN_ERR + "zmii%d: invalid mode %d specified for input %d\n", + ocpdev->def->index, *mode, input); + return -EINVAL; + } + } + + /* Report back correct PHY mode, + * it may be used during PHY initialization. + */ + *mode = dev->mode; + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); + out: + ++dev->users; + return 0; +} + +int __init zmii_attach(void *emac) +{ + struct ocp_enet_private *dev = emac; + struct ocp_func_emac_data *emacdata = dev->def->additions; + + if (emacdata->zmii_idx >= 0) { + dev->zmii_input = emacdata->zmii_mux; + dev->zmii_dev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, + emacdata->zmii_idx); + if (!dev->zmii_dev) { + printk(KERN_ERR "emac%d: unknown zmii%d!\n", + dev->def->index, emacdata->zmii_idx); + return -ENODEV; + } + if (zmii_init + (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) { + printk(KERN_ERR + "emac%d: zmii%d initialization failed!\n", + dev->def->index, emacdata->zmii_idx); + return -ENODEV; + } + } + return 0; +} + +void __zmii_enable_mdio(struct ocp_device *ocpdev, int input) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; + + ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input); + + out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); +} + +void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + u32 ssr = in_be32(&dev->base->ssr); + + ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); + + if (speed == SPEED_100) + ssr |= ZMII_SSR_SP(input); + else + ssr &= ~ZMII_SSR_SP(input); + + out_be32(&dev->base->ssr, ssr); +} + +void __exit __zmii_fini(struct ocp_device *ocpdev, int input) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + BUG_ON(!dev || dev->users == 0); + + ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); + + /* Disable this input */ + out_be32(&dev->base->fer, + in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); + + if (!--dev->users) { + /* Free everything if this is the last user */ + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)dev->base); + kfree(dev); + } +} + +int __zmii_get_regs_len(struct ocp_device *ocpdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct zmii_regs); +} + +void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = ocpdev->def->index; + memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); + return regs + 1; +} diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h index 6f6cd2a39e38..0bb26062c0ad 100644 --- a/drivers/net/ibm_emac/ibm_emac_zmii.h +++ b/drivers/net/ibm_emac/ibm_emac_zmii.h @@ -1,23 +1,27 @@ /* - * ocp_zmii.h + * drivers/net/ibm_emac/ibm_emac_zmii.h * - * Defines for the IBM ZMII bridge + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. * - * Armin Kuster akuster@mvista.com - * Dec, 2001 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Copyright 2001 MontaVista Softare Inc. + * Based on original work by + * Armin Kuster + * Copyright 2001 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - #ifndef _IBM_EMAC_ZMII_H_ #define _IBM_EMAC_ZMII_H_ #include +#include +#include /* ZMII bridge registers */ struct zmii_regs { @@ -26,68 +30,54 @@ struct zmii_regs { u32 smiirs; /* SMII status reg */ }; -#define ZMII_INPUTS 4 - /* ZMII device */ struct ibm_ocp_zmii { struct zmii_regs *base; - int mode[ZMII_INPUTS]; + int mode; /* subset of PHY_MODE_XXXX */ int users; /* number of EMACs using this ZMII bridge */ + u32 fer_save; /* FER value left by firmware */ }; -/* Fuctional Enable Reg */ - -#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x)) - -#define ZMII_MDI0 0x80000000 -#define ZMII_SMII0 0x40000000 -#define ZMII_RMII0 0x20000000 -#define ZMII_MII0 0x10000000 -#define ZMII_MDI1 0x08000000 -#define ZMII_SMII1 0x04000000 -#define ZMII_RMII1 0x02000000 -#define ZMII_MII1 0x01000000 -#define ZMII_MDI2 0x00800000 -#define ZMII_SMII2 0x00400000 -#define ZMII_RMII2 0x00200000 -#define ZMII_MII2 0x00100000 -#define ZMII_MDI3 0x00080000 -#define ZMII_SMII3 0x00040000 -#define ZMII_RMII3 0x00020000 -#define ZMII_MII3 0x00010000 +#ifdef CONFIG_IBM_EMAC_ZMII +int zmii_attach(void *emac) __init; -/* Speed Selection reg */ +void __zmii_fini(struct ocp_device *ocpdev, int input) __exit; +static inline void zmii_fini(struct ocp_device *ocpdev, int input) +{ + if (ocpdev) + __zmii_fini(ocpdev, input); +} -#define ZMII_SCI0 0x40000000 -#define ZMII_FSS0 0x20000000 -#define ZMII_SP0 0x10000000 -#define ZMII_SCI1 0x04000000 -#define ZMII_FSS1 0x02000000 -#define ZMII_SP1 0x01000000 -#define ZMII_SCI2 0x00400000 -#define ZMII_FSS2 0x00200000 -#define ZMII_SP2 0x00100000 -#define ZMII_SCI3 0x00040000 -#define ZMII_FSS3 0x00020000 -#define ZMII_SP3 0x00010000 +void __zmii_enable_mdio(struct ocp_device *ocpdev, int input); +static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input) +{ + if (ocpdev) + __zmii_enable_mdio(ocpdev, input); +} -#define ZMII_MII0_100MB ZMII_SP0 -#define ZMII_MII0_10MB ~ZMII_SP0 -#define ZMII_MII1_100MB ZMII_SP1 -#define ZMII_MII1_10MB ~ZMII_SP1 -#define ZMII_MII2_100MB ZMII_SP2 -#define ZMII_MII2_10MB ~ZMII_SP2 -#define ZMII_MII3_100MB ZMII_SP3 -#define ZMII_MII3_10MB ~ZMII_SP3 +void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed); +static inline void zmii_set_speed(struct ocp_device *ocpdev, int input, + int speed) +{ + if (ocpdev) + __zmii_set_speed(ocpdev, input, speed); +} -/* SMII Status reg */ +int __zmii_get_regs_len(struct ocp_device *ocpdev); +static inline int zmii_get_regs_len(struct ocp_device *ocpdev) +{ + return ocpdev ? __zmii_get_regs_len(ocpdev) : 0; +} -#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */ -#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */ +void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf); -#define SMII 0 -#define RMII 1 -#define MII 2 -#define MDI 3 +#else +# define zmii_attach(x) 0 +# define zmii_fini(x,y) ((void)0) +# define zmii_enable_mdio(x,y) ((void)0) +# define zmii_set_speed(x,y,z) ((void)0) +# define zmii_get_regs_len(x) 0 +# define zmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_EMAC_ZMII */ #endif /* _IBM_EMAC_ZMII_H_ */ -- cgit v1.2.3 From b2795f596932286ef12dc08857960d654f577405 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Oct 2005 16:43:40 -0400 Subject: [git] change permissions on drivers/net/amd8111e.[ch] to 0644, removing executable bits. --- drivers/net/amd8111e.c | 0 drivers/net/amd8111e.h | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 drivers/net/amd8111e.c mode change 100755 => 100644 drivers/net/amd8111e.h (limited to 'drivers') diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c old mode 100755 new mode 100644 diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h old mode 100755 new mode 100644 -- cgit v1.2.3 From 7380a78a973a8109c13cb0e47617c456b6f6e1f5 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Fri, 28 Oct 2005 16:46:35 -0400 Subject: sis900: come alive after temporary memory shortage 1) Forgotten counter incrementation in sis900_rx() in case it doesn't get memory for skb, that leads to whole interface failure. Problem is accompanied with messages: eth0: Memory squeeze,deferring packet. eth0: NULL pointer encountered in Rx ring, skipping 2) If counter cur_rx overflows and there'll be temporary memory problems buffer can't be recreated later, when memory IS available. 3) Limit the work in handler to prevent the endless packets processing if new packets are generated faster then handled. Signed-off-by: Konstantin Khorenko Signed-off-by: Vasily Averin Signed-off-by: Jeff Garzik --- drivers/net/sis900.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 23b713c700b3..1d4d88680db1 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1696,15 +1696,20 @@ static int sis900_rx(struct net_device *net_dev) long ioaddr = net_dev->base_addr; unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC; u32 rx_status = sis_priv->rx_ring[entry].cmdsts; + int rx_work_limit; if (netif_msg_rx_status(sis_priv)) printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " "status:0x%8.8x\n", sis_priv->cur_rx, sis_priv->dirty_rx, rx_status); + rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx; while (rx_status & OWN) { unsigned int rx_size; + if (--rx_work_limit < 0) + break; + rx_size = (rx_status & DSIZE) - CRC_SIZE; if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) { @@ -1732,9 +1737,11 @@ static int sis900_rx(struct net_device *net_dev) we are working on NULL sk_buff :-( */ if (sis_priv->rx_skbuff[entry] == NULL) { if (netif_msg_rx_err(sis_priv)) - printk(KERN_INFO "%s: NULL pointer " - "encountered in Rx ring, skipping\n", - net_dev->name); + printk(KERN_WARNING "%s: NULL pointer " + "encountered in Rx ring\n" + "cur_rx:%4.4d, dirty_rx:%4.4d\n", + net_dev->name, sis_priv->cur_rx, + sis_priv->dirty_rx); break; } @@ -1770,6 +1777,7 @@ static int sis900_rx(struct net_device *net_dev) sis_priv->rx_ring[entry].cmdsts = 0; sis_priv->rx_ring[entry].bufptr = 0; sis_priv->stats.rx_dropped++; + sis_priv->cur_rx++; break; } skb->dev = net_dev; @@ -1787,7 +1795,7 @@ static int sis900_rx(struct net_device *net_dev) /* refill the Rx buffer, what if the rate of refilling is slower * than consuming ?? */ - for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) { + for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) { struct sk_buff *skb; entry = sis_priv->dirty_rx % NUM_RX_DESC; -- cgit v1.2.3 From b4558ea93d66a43f7990d26f145fd4c54a01c9bf Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 28 Oct 2005 16:53:13 -0400 Subject: drivers/net: Remove pointless checks for NULL prior to calling kfree() --- drivers/net/acenic.c | 6 ++-- drivers/net/au1000_eth.c | 6 ++-- drivers/net/b44.c | 12 +++----- drivers/net/bmac.c | 6 ++-- drivers/net/bnx2.c | 12 +++----- drivers/net/e1000/e1000_ethtool.c | 7 ++--- drivers/net/hamradio/mkiss.c | 6 ++-- drivers/net/ibmveth.c | 6 ++-- drivers/net/irda/donauboe.c | 6 ++-- drivers/net/irda/irda-usb.c | 6 ++-- drivers/net/irda/irport.c | 3 +- drivers/net/irda/sir_dev.c | 3 +- drivers/net/irda/vlsi_ir.c | 3 +- drivers/net/mace.c | 6 ++-- drivers/net/ni65.c | 9 ++---- drivers/net/rrunner.c | 6 ++-- drivers/net/s2io.c | 3 +- drivers/net/saa9730.c | 8 ++--- drivers/net/tg3.c | 6 ++-- drivers/net/tulip/de2104x.c | 6 ++-- drivers/net/tulip/tulip_core.c | 6 ++-- drivers/net/via-velocity.c | 6 ++-- drivers/net/wireless/airo.c | 48 ++++++++++++------------------ drivers/net/wireless/airo_cs.c | 4 +-- drivers/net/wireless/atmel.c | 6 ++-- drivers/net/wireless/atmel_cs.c | 3 +- drivers/net/wireless/hostap/hostap_ioctl.c | 9 ++---- drivers/net/wireless/prism54/islpci_dev.c | 3 +- drivers/net/wireless/prism54/oid_mgt.c | 9 +++--- drivers/net/wireless/strip.c | 38 ++++++++--------------- include/net/ax25.h | 3 +- include/net/netrom.h | 3 +- 32 files changed, 90 insertions(+), 174 deletions(-) (limited to 'drivers') diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index dbecc6bf7851..b8953de5664a 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -871,10 +871,8 @@ static void ace_init_cleanup(struct net_device *dev) if (ap->info) pci_free_consistent(ap->pdev, sizeof(struct ace_info), ap->info, ap->info_dma); - if (ap->skb) - kfree(ap->skb); - if (ap->trace_buf) - kfree(ap->trace_buf); + kfree(ap->skb); + kfree(ap->trace_buf); if (dev->irq) free_irq(dev->irq, dev); diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 78506911d656..332e9953c55c 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1606,8 +1606,7 @@ err_out: /* here we should have a valid dev plus aup-> register addresses * so we can reset the mac properly.*/ reset_mac(dev); - if (aup->mii) - kfree(aup->mii); + kfree(aup->mii); for (i = 0; i < NUM_RX_DMA; i++) { if (aup->rx_db_inuse[i]) ReleaseDB(aup, aup->rx_db_inuse[i]); @@ -1806,8 +1805,7 @@ static void __exit au1000_cleanup_module(void) if (dev) { aup = (struct au1000_private *) dev->priv; unregister_netdev(dev); - if (aup->mii) - kfree(aup->mii); + kfree(aup->mii); for (j = 0; j < NUM_RX_DMA; j++) { if (aup->rx_db_inuse[j]) ReleaseDB(aup, aup->rx_db_inuse[j]); diff --git a/drivers/net/b44.c b/drivers/net/b44.c index ab845076ff9f..5485e3b1cd35 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1131,14 +1131,10 @@ static void b44_init_rings(struct b44 *bp) */ static void b44_free_consistent(struct b44 *bp) { - if (bp->rx_buffers) { - kfree(bp->rx_buffers); - bp->rx_buffers = NULL; - } - if (bp->tx_buffers) { - kfree(bp->tx_buffers); - bp->tx_buffers = NULL; - } + kfree(bp->rx_buffers); + bp->rx_buffers = NULL; + kfree(bp->tx_buffers); + bp->tx_buffers = NULL; if (bp->rx_ring) { if (bp->flags & B44_FLAG_RX_RING_HACK) { dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma, diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 60dba4a1ca5c..73f2fcfc557f 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -1689,10 +1689,8 @@ static void __exit bmac_exit(void) { macio_unregister_driver(&bmac_driver); - if (bmac_emergency_rxbuf != NULL) { - kfree(bmac_emergency_rxbuf); - bmac_emergency_rxbuf = NULL; - } + kfree(bmac_emergency_rxbuf); + bmac_emergency_rxbuf = NULL; } MODULE_AUTHOR("Randy Gobbel/Paul Mackerras"); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 3a2ace01e444..11d252318221 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -314,20 +314,16 @@ bnx2_free_mem(struct bnx2 *bp) bp->tx_desc_ring, bp->tx_desc_mapping); bp->tx_desc_ring = NULL; } - if (bp->tx_buf_ring) { - kfree(bp->tx_buf_ring); - bp->tx_buf_ring = NULL; - } + kfree(bp->tx_buf_ring); + bp->tx_buf_ring = NULL; if (bp->rx_desc_ring) { pci_free_consistent(bp->pdev, sizeof(struct rx_bd) * RX_DESC_CNT, bp->rx_desc_ring, bp->rx_desc_mapping); bp->rx_desc_ring = NULL; } - if (bp->rx_buf_ring) { - kfree(bp->rx_buf_ring); - bp->rx_buf_ring = NULL; - } + kfree(bp->rx_buf_ring); + bp->rx_buf_ring = NULL; } static int diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6b9acc7f94a3..9c7feaeaa6a4 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -965,11 +965,8 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) if(rxdr->desc) pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); - if(txdr->buffer_info) - kfree(txdr->buffer_info); - if(rxdr->buffer_info) - kfree(rxdr->buffer_info); - + kfree(txdr->buffer_info); + kfree(rxdr->buffer_info); return; } diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 85d6dc005be0..3e9accf137e7 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -390,10 +390,8 @@ static void ax_changedmtu(struct mkiss *ax) "MTU change cancelled.\n", ax->dev->name); dev->mtu = ax->mtu; - if (xbuff != NULL) - kfree(xbuff); - if (rbuff != NULL) - kfree(rbuff); + kfree(xbuff); + kfree(rbuff); return; } diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index f5819527ec9d..36da54ad2b7b 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -276,10 +276,8 @@ static void ibmveth_free_buffer_pool(struct ibmveth_adapter *adapter, struct ibm { int i; - if(pool->free_map) { - kfree(pool->free_map); - pool->free_map = NULL; - } + kfree(pool->free_map); + pool->free_map = NULL; if(pool->skbuff && pool->dma_addr) { for(i = 0; i < pool->size; ++i) { diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 0a08c539c051..0282771b1cbb 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -1695,11 +1695,9 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid) freebufs: for (i = 0; i < TX_SLOTS; ++i) - if (self->tx_bufs[i]) - kfree (self->tx_bufs[i]); + kfree (self->tx_bufs[i]); for (i = 0; i < RX_SLOTS; ++i) - if (self->rx_bufs[i]) - kfree (self->rx_bufs[i]); + kfree (self->rx_bufs[i]); kfree(self->ringbuf); freeregion: diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 6c766fdc51a6..c22c0517883c 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1168,10 +1168,8 @@ static inline void irda_usb_close(struct irda_usb_cb *self) unregister_netdev(self->netdev); /* Remove the speed buffer */ - if (self->speed_buff != NULL) { - kfree(self->speed_buff); - self->speed_buff = NULL; - } + kfree(self->speed_buff); + self->speed_buff = NULL; } /********************** USB CONFIG SUBROUTINES **********************/ diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c index 5971315f3fa0..3d016a498e1d 100644 --- a/drivers/net/irda/irport.c +++ b/drivers/net/irda/irport.c @@ -235,8 +235,7 @@ static int irport_close(struct irport_cb *self) __FUNCTION__, self->io.sir_base); release_region(self->io.sir_base, self->io.sir_ext); - if (self->tx_buff.head) - kfree(self->tx_buff.head); + kfree(self->tx_buff.head); if (self->rx_buff.skb) kfree_skb(self->rx_buff.skb); diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index efc5a8870565..df22b8b532e7 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -490,8 +490,7 @@ static void sirdev_free_buffers(struct sir_dev *dev) { if (dev->rx_buff.skb) kfree_skb(dev->rx_buff.skb); - if (dev->tx_buff.head) - kfree(dev->tx_buff.head); + kfree(dev->tx_buff.head); dev->rx_buff.head = dev->tx_buff.head = NULL; dev->rx_buff.skb = NULL; } diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index 651c5a6578fd..a9f49f058cfb 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -473,8 +473,7 @@ static int vlsi_free_ring(struct vlsi_ring *r) rd_set_addr_status(rd, 0, 0); if (busaddr) pci_unmap_single(r->pdev, busaddr, r->len, r->dir); - if (rd->buf) - kfree(rd->buf); + kfree(rd->buf); } kfree(r); return 0; diff --git a/drivers/net/mace.c b/drivers/net/mace.c index 81d0a26e4f41..09b1e7b364e5 100644 --- a/drivers/net/mace.c +++ b/drivers/net/mace.c @@ -1035,10 +1035,8 @@ static void __exit mace_cleanup(void) { macio_unregister_driver(&mace_driver); - if (dummy_buf) { - kfree(dummy_buf); - dummy_buf = NULL; - } + kfree(dummy_buf); + dummy_buf = NULL; } MODULE_AUTHOR("Paul Mackerras"); diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c index 925d1dfcc4dc..bb42ff218484 100644 --- a/drivers/net/ni65.c +++ b/drivers/net/ni65.c @@ -696,8 +696,7 @@ static void ni65_free_buffer(struct priv *p) return; for(i=0;itmdbounce[i]) - kfree(p->tmdbounce[i]); + kfree(p->tmdbounce[i]); #ifdef XMT_VIA_SKB if(p->tmd_skb[i]) dev_kfree_skb(p->tmd_skb[i]); @@ -710,12 +709,10 @@ static void ni65_free_buffer(struct priv *p) if(p->recv_skb[i]) dev_kfree_skb(p->recv_skb[i]); #else - if(p->recvbounce[i]) - kfree(p->recvbounce[i]); + kfree(p->recvbounce[i]); #endif } - if(p->self) - kfree(p->self); + kfree(p->self); } diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c index ec1a18d189a1..19c2df9c86fe 100644 --- a/drivers/net/rrunner.c +++ b/drivers/net/rrunner.c @@ -1710,10 +1710,8 @@ static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) error = -EFAULT; } wf_out: - if (oldimage) - kfree(oldimage); - if (image) - kfree(image); + kfree(oldimage); + kfree(image); return error; case SIOCRRID: diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index d303d162974f..5ea897714a14 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -705,8 +705,7 @@ static void free_shared_mem(struct s2io_nic *nic) } kfree(mac_control->rings[i].ba[j]); } - if (mac_control->rings[i].ba) - kfree(mac_control->rings[i].ba); + kfree(mac_control->rings[i].ba); } #endif diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c index fd0167077fbe..110e777f206e 100644 --- a/drivers/net/saa9730.c +++ b/drivers/net/saa9730.c @@ -997,10 +997,7 @@ static void __devexit saa9730_remove_one(struct pci_dev *pdev) if (dev) { unregister_netdev(dev); - - if (dev->priv) - kfree(dev->priv); - + kfree(dev->priv); free_netdev(dev); pci_release_regions(pdev); pci_disable_device(pdev); @@ -1096,8 +1093,7 @@ static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq) return 0; out: - if (dev->priv) - kfree(dev->priv); + kfree(dev->priv); return ret; } diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 551c9449322d..b547233ad9f7 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3918,10 +3918,8 @@ static void tg3_init_rings(struct tg3 *tp) */ static void tg3_free_consistent(struct tg3 *tp) { - if (tp->rx_std_buffers) { - kfree(tp->rx_std_buffers); - tp->rx_std_buffers = NULL; - } + kfree(tp->rx_std_buffers); + tp->rx_std_buffers = NULL; if (tp->rx_std) { pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES, tp->rx_std, tp->rx_std_mapping); diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 6b8eee8f7bfd..d7fb3ffe06ac 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -2076,8 +2076,7 @@ static int __init de_init_one (struct pci_dev *pdev, return 0; err_out_iomap: - if (de->ee_data) - kfree(de->ee_data); + kfree(de->ee_data); iounmap(regs); err_out_res: pci_release_regions(pdev); @@ -2096,8 +2095,7 @@ static void __exit de_remove_one (struct pci_dev *pdev) if (!dev) BUG(); unregister_netdev(dev); - if (de->ee_data) - kfree(de->ee_data); + kfree(de->ee_data); iounmap(de->regs); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 6266a9a7e6e3..125ed00e95a5 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1727,8 +1727,7 @@ err_out_free_ring: tp->rx_ring, tp->rx_ring_dma); err_out_mtable: - if (tp->mtable) - kfree (tp->mtable); + kfree (tp->mtable); pci_iounmap(pdev, ioaddr); err_out_free_res: @@ -1806,8 +1805,7 @@ static void __devexit tulip_remove_one (struct pci_dev *pdev) sizeof (struct tulip_rx_desc) * RX_RING_SIZE + sizeof (struct tulip_tx_desc) * TX_RING_SIZE, tp->rx_ring, tp->rx_ring_dma); - if (tp->mtable) - kfree (tp->mtable); + kfree (tp->mtable); pci_iounmap(pdev, tp->base_addr); free_netdev (dev); pci_release_regions (pdev); diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index abc5cee6eedc..a368d08e7d19 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1212,10 +1212,8 @@ static void velocity_free_td_ring(struct velocity_info *vptr) velocity_free_td_ring_entry(vptr, j, i); } - if (vptr->td_infos[j]) { - kfree(vptr->td_infos[j]); - vptr->td_infos[j] = NULL; - } + kfree(vptr->td_infos[j]); + vptr->td_infos[j] = NULL; } } diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index cb429e783749..4c11699bad91 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2381,14 +2381,10 @@ void stop_airo_card( struct net_device *dev, int freeres ) dev_kfree_skb(skb); } - if (ai->flash) - kfree(ai->flash); - if (ai->rssi) - kfree(ai->rssi); - if (ai->APList) - kfree(ai->APList); - if (ai->SSID) - kfree(ai->SSID); + kfree(ai->flash); + kfree(ai->rssi); + kfree(ai->APList); + kfree(ai->SSID); if (freeres) { /* PCMCIA frees this stuff, so only for PCI and ISA */ release_region( dev->base_addr, 64 ); @@ -3626,10 +3622,8 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) int rc; memset( &mySsid, 0, sizeof( mySsid ) ); - if (ai->flash) { - kfree (ai->flash); - ai->flash = NULL; - } + kfree (ai->flash); + ai->flash = NULL; /* The NOP is the first step in getting the card going */ cmd.cmd = NOP; @@ -3666,14 +3660,10 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) tdsRssiRid rssi_rid; CapabilityRid cap_rid; - if (ai->APList) { - kfree(ai->APList); - ai->APList = NULL; - } - if (ai->SSID) { - kfree(ai->SSID); - ai->SSID = NULL; - } + kfree(ai->APList); + ai->APList = NULL; + kfree(ai->SSID); + ai->SSID = NULL; // general configuration (read/modify/write) status = readConfigRid(ai, lock); if ( status != SUCCESS ) return ERROR; @@ -3687,10 +3677,8 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */ } else { - if (ai->rssi) { - kfree(ai->rssi); - ai->rssi = NULL; - } + kfree(ai->rssi); + ai->rssi = NULL; if (cap_rid.softCap & 8) ai->config.rmode |= RXMODE_NORMALIZED_RSSI; else @@ -5369,11 +5357,13 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) { static int proc_close( struct inode *inode, struct file *file ) { - struct proc_data *data = (struct proc_data *)file->private_data; - if ( data->on_close != NULL ) data->on_close( inode, file ); - if ( data->rbuffer ) kfree( data->rbuffer ); - if ( data->wbuffer ) kfree( data->wbuffer ); - kfree( data ); + struct proc_data *data = file->private_data; + + if (data->on_close != NULL) + data->on_close(inode, file); + kfree(data->rbuffer); + kfree(data->wbuffer); + kfree(data); return 0; } diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index bf25584d68d3..784de9109113 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -258,9 +258,7 @@ static void airo_detach(dev_link_t *link) /* Unlink device structure, free pieces */ *linkp = link->next; - if (link->priv) { - kfree(link->priv); - } + kfree(link->priv); kfree(link); } /* airo_detach */ diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index d57011028b72..1fbe027d26b6 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1653,8 +1653,7 @@ void stop_atmel_card(struct net_device *dev, int freeres) unregister_netdev(dev); remove_proc_entry("driver/atmel", NULL); free_irq(dev->irq, dev); - if (priv->firmware) - kfree(priv->firmware); + kfree(priv->firmware); if (freeres) { /* PCMCIA frees this stuff, so only for PCI */ release_region(dev->base_addr, 64); @@ -2450,8 +2449,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; } - if (priv->firmware) - kfree(priv->firmware); + kfree(priv->firmware); priv->firmware = new_firmware; priv->firmware_length = com.len; diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ff031a3985b3..195cb36619e8 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -259,8 +259,7 @@ static void atmel_detach(dev_link_t *link) /* Unlink device structure, free pieces */ *linkp = link->next; - if (link->priv) - kfree(link->priv); + kfree(link->priv); kfree(link); } diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 53f5246c40aa..2617d70bcda9 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -552,7 +552,6 @@ static int prism2_ioctl_giwaplist(struct net_device *dev, kfree(addr); kfree(qual); - return 0; } @@ -3081,9 +3080,7 @@ static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) ret = local->func->download(local, param); out: - if (param != NULL) - kfree(param); - + kfree(param); return ret; } #endif /* PRISM2_DOWNLOAD_SUPPORT */ @@ -3890,9 +3887,7 @@ static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) } out: - if (param != NULL) - kfree(param); - + kfree(param); return ret; } diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 6c9584a9f284..78bdb359835e 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -754,8 +754,7 @@ islpci_free_memory(islpci_private *priv) pci_unmap_single(priv->pdev, buf->pci_addr, buf->size, PCI_DMA_FROMDEVICE); buf->pci_addr = 0; - if (buf->mem) - kfree(buf->mem); + kfree(buf->mem); buf->size = 0; buf->mem = NULL; } diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c index 12123e24b113..eea2f04c8c6d 100644 --- a/drivers/net/wireless/prism54/oid_mgt.c +++ b/drivers/net/wireless/prism54/oid_mgt.c @@ -268,11 +268,10 @@ mgt_clean(islpci_private *priv) if (!priv->mib) return; - for (i = 0; i < OID_NUM_LAST; i++) - if (priv->mib[i]) { - kfree(priv->mib[i]); - priv->mib[i] = NULL; - } + for (i = 0; i < OID_NUM_LAST; i++) { + kfree(priv->mib[i]); + priv->mib[i] = NULL; + } kfree(priv->mib); priv->mib = NULL; } diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 7bc7fc823128..d25264ba0c0e 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -860,12 +860,9 @@ static int allocate_buffers(struct strip *strip_info, int mtu) strip_info->mtu = dev->mtu = mtu; return (1); } - if (r) - kfree(r); - if (s) - kfree(s); - if (t) - kfree(t); + kfree(r); + kfree(s); + kfree(t); return (0); } @@ -922,13 +919,9 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", strip_info->dev->name, old_mtu, strip_info->mtu); - if (orbuff) - kfree(orbuff); - if (osbuff) - kfree(osbuff); - if (otbuff) - kfree(otbuff); - + kfree(orbuff); + kfree(osbuff); + kfree(otbuff); return 0; } @@ -2498,18 +2491,13 @@ static int strip_close_low(struct net_device *dev) /* * Free all STRIP frame buffers. */ - if (strip_info->rx_buff) { - kfree(strip_info->rx_buff); - strip_info->rx_buff = NULL; - } - if (strip_info->sx_buff) { - kfree(strip_info->sx_buff); - strip_info->sx_buff = NULL; - } - if (strip_info->tx_buff) { - kfree(strip_info->tx_buff); - strip_info->tx_buff = NULL; - } + kfree(strip_info->rx_buff); + strip_info->rx_buff = NULL; + kfree(strip_info->sx_buff); + strip_info->sx_buff = NULL; + kfree(strip_info->tx_buff); + strip_info->tx_buff = NULL; + del_timer(&strip_info->idle_timer); return 0; } diff --git a/include/net/ax25.h b/include/net/ax25.h index 30bb4a893237..2250a18b0cbb 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -237,8 +237,7 @@ typedef struct ax25_cb { static __inline__ void ax25_cb_put(ax25_cb *ax25) { if (atomic_dec_and_test(&ax25->refcount)) { - if (ax25->digipeat) - kfree(ax25->digipeat); + kfree(ax25->digipeat); kfree(ax25); } } diff --git a/include/net/netrom.h b/include/net/netrom.h index a6bf6e0f606a..a5ee53bce62f 100644 --- a/include/net/netrom.h +++ b/include/net/netrom.h @@ -136,8 +136,7 @@ static __inline__ void nr_node_put(struct nr_node *nr_node) static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh) { if (atomic_dec_and_test(&nr_neigh->refcount)) { - if (nr_neigh->digipeat != NULL) - kfree(nr_neigh->digipeat); + kfree(nr_neigh->digipeat); kfree(nr_neigh); } } -- cgit v1.2.3 From 030ee39c0fef49d7dcd32e71b1ca98fcc23e2a72 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 28 Oct 2005 13:55:08 -0700 Subject: pcmcia: add socket register data to sysfs for yenta devices It's simple, and it's a good debugging aid. Signed-off-by: Linus Torvalds --- drivers/pcmcia/yenta_socket.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index db9f952f9e3c..ec6ab65f0872 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -151,6 +151,40 @@ static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val) readb(socket->base + 0x800 + reg + 1); } +static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf) +{ + struct pci_dev *dev = to_pci_dev(yentadev); + struct yenta_socket *socket = pci_get_drvdata(dev); + int offset = 0, i; + + offset = snprintf(buf, PAGE_SIZE, "CB registers:"); + for (i = 0; i < 0x24; i += 4) { + unsigned val; + if (!(i & 15)) + offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); + val = cb_readl(socket, i); + offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val); + } + + offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:"); + for (i = 0; i < 0x45; i++) { + unsigned char val; + if (!(i & 7)) { + if (i & 8) { + memcpy(buf + offset, " -", 2); + offset += 2; + } else + offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); + } + val = exca_readb(socket, i); + offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val); + } + buf[offset++] = '\n'; + return offset; +} + +static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL); + /* * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend * on what kind of card is inserted.. @@ -765,6 +799,9 @@ static void yenta_close(struct pci_dev *dev) { struct yenta_socket *sock = pci_get_drvdata(dev); + /* Remove the register attributes */ + device_remove_file(&dev->dev, &dev_attr_yenta_registers); + /* we don't want a dying socket registered */ pcmcia_unregister_socket(&sock->socket); @@ -1138,8 +1175,11 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i /* Register it with the pcmcia layer.. */ ret = pcmcia_register_socket(&socket->socket); - if (ret == 0) + if (ret == 0) { + /* Add the yenta register attributes */ + device_create_file(&dev->dev, &dev_attr_yenta_registers); goto out; + } unmap: iounmap(socket->base); -- cgit v1.2.3 From 4f075707a9380592586d608a8d04dfbdb3c40339 Mon Sep 17 00:00:00 2001 From: Komuro Date: Fri, 28 Oct 2005 16:55:55 -0400 Subject: [netdrvr] ne2k-pci based card does not support bus-mastering. pci_set_master is unnecessary. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik --- drivers/net/ne2k-pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index e531a4eedfee..d11821dd86ed 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -675,7 +675,6 @@ static int ne2k_pci_resume (struct pci_dev *pdev) pci_set_power_state(pdev, 0); pci_restore_state(pdev); pci_enable_device(pdev); - pci_set_master(pdev); NS8390_init(dev, 1); netif_device_attach(dev); -- cgit v1.2.3 From ad18b0ea089928367185e13d11424aea91d4b41f Mon Sep 17 00:00:00 2001 From: Panagiotis Issaris Date: Mon, 5 Sep 2005 04:14:10 +0200 Subject: [PATCH] ipw2200: Missing kmalloc check The ipw2200 driver code in current GIT contains a kmalloc() followed by a memset() without handling a possible memory allocation failure. Signed-off-by: Panagiotis Issaris Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index de4e6c23e4b8..3db0c32afe82 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -4030,6 +4030,10 @@ static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv) int i; rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL); + if (unlikely(!rxq)) { + IPW_ERROR("memory allocation failed\n"); + return NULL; + } memset(rxq, 0, sizeof(*rxq)); spin_lock_init(&rxq->lock); INIT_LIST_HEAD(&rxq->rx_free); -- cgit v1.2.3 From 07c1da2396632a4ad2cab41c6cd939b159f54968 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Oct 2005 17:00:31 -0400 Subject: [libata sata_promise] add pci id Contributed by Daniel Mueller @ Siemens AG. --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index eee93b0016df..50495569f409 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -195,6 +195,8 @@ static struct ata_port_info pdc_port_info[] = { static struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, -- cgit v1.2.3 From 205cf13e0b57500e2cc6442effa991c1a63f4db7 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Sat, 17 Sep 2005 05:32:55 +1000 Subject: [PATCH] hwmon: adm9240 driver update - cleanups hwmon: adm9240 update 1/2: cleanups: o remove i2c read/write wrapper interface as it does nothing, o change kmalloc + memset to kzalloc Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm9240.c | 92 +++++++++++++++++++++++-------------------------- 1 file changed, 44 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index bc7faef162f7..ecef342e5fa3 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -170,17 +170,6 @@ struct adm9240_data { u8 vrm; /* -- vrm set on startup, no accessor */ }; -/* i2c byte read/write interface */ -static int adm9240_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - /*** sysfs accessors ***/ /* temperature */ @@ -207,7 +196,7 @@ static ssize_t set_##value(struct device *dev, \ \ down(&data->update_lock); \ data->value = TEMP_TO_REG(temp); \ - adm9240_write_value(client, reg, data->value); \ + i2c_smbus_write_byte_data(client, reg, data->value); \ up(&data->update_lock); \ return count; \ } @@ -249,7 +238,8 @@ static ssize_t set_in_min(struct device *dev, const char *buf, down(&data->update_lock); data->in_min[nr] = IN_TO_REG(val, nr); - adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(nr), + data->in_min[nr]); up(&data->update_lock); return count; } @@ -263,7 +253,8 @@ static ssize_t set_in_max(struct device *dev, const char *buf, down(&data->update_lock); data->in_max[nr] = IN_TO_REG(val, nr); - adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(nr), + data->in_max[nr]); up(&data->update_lock); return count; } @@ -341,11 +332,11 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr, { u8 reg, old, shift = (nr + 2) * 2; - reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); + reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); old = (reg >> shift) & 3; reg &= ~(3 << shift); reg |= (fan_div << shift); - adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg); + i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg); dev_dbg(&client->dev, "fan%d clock divider changed from %u " "to %u\n", nr + 1, 1 << old, 1 << fan_div); } @@ -406,7 +397,7 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, data->fan_div[nr] = new_div; adm9240_write_fan_div(client, nr, new_div); } - adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr), + i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr), data->fan_min[nr]); up(&data->update_lock); @@ -479,7 +470,7 @@ static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const down(&data->update_lock); data->aout = AOUT_TO_REG(val); - adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout); + i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout); up(&data->update_lock); return count; } @@ -492,7 +483,8 @@ static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, unsigned long val = simple_strtol(buf, NULL, 10); if (val == 1) { - adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80); + i2c_smbus_write_byte_data(client, + ADM9240_REG_CHASSIS_CLEAR, 0x80); dev_dbg(&client->dev, "chassis intrusion latch cleared\n"); } return count; @@ -513,11 +505,10 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm9240_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); @@ -533,7 +524,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) if (kind < 0) { /* verify chip: reg address should match i2c address */ - if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR) + if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR) != address) { dev_err(&adapter->dev, "detect fail: address match, " "0x%02x\n", address); @@ -541,8 +532,8 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } /* check known chip manufacturer */ - man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID); - + man_id = i2c_smbus_read_byte_data(new_client, + ADM9240_REG_MAN_ID); if (man_id == 0x23) { kind = adm9240; } else if (man_id == 0xda) { @@ -556,7 +547,8 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } /* successful detect, print chip info */ - die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV); + die_rev = i2c_smbus_read_byte_data(new_client, + ADM9240_REG_DIE_REV); dev_info(&adapter->dev, "found %s revision %u\n", man_id == 0x23 ? "ADM9240" : man_id == 0xda ? "DS1780" : "LM81", die_rev); @@ -654,8 +646,8 @@ static int adm9240_detach_client(struct i2c_client *client) static void adm9240_init_client(struct i2c_client *client) { struct adm9240_data *data = i2c_get_clientdata(client); - u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG); - u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3; + u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG); + u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3; data->vrm = vid_which_vrm(); /* need this to report vid as mV */ @@ -672,18 +664,22 @@ static void adm9240_init_client(struct i2c_client *client) for (i = 0; i < 6; i++) { - adm9240_write_value(client, + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(i), 0); - adm9240_write_value(client, + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(i), 255); } - adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255); - adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255); - adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127); - adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127); + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(0), 255); + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(1), 255); + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_HIGH, 127); + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_HYST, 127); /* start measurement cycle */ - adm9240_write_value(client, ADM9240_REG_CONFIG, 1); + i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); dev_info(&client->dev, "cold start: config was 0x%02x " "mode %u\n", conf, mode); @@ -704,25 +700,25 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) for (i = 0; i < 6; i++) /* read voltages */ { - data->in[i] = adm9240_read_value(client, + data->in[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_IN(i)); } - data->alarms = adm9240_read_value(client, + data->alarms = i2c_smbus_read_byte_data(client, ADM9240_REG_INT(0)) | - adm9240_read_value(client, + i2c_smbus_read_byte_data(client, ADM9240_REG_INT(1)) << 8; /* read temperature: assume temperature changes less than * 0.5'C per two measurement cycles thus ignore possible * but unlikely aliasing error on lsb reading. --Grant */ - data->temp = ((adm9240_read_value(client, + data->temp = ((i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP) << 8) | - adm9240_read_value(client, + i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF)) / 128; for (i = 0; i < 2; i++) /* read fans */ { - data->fan[i] = adm9240_read_value(client, + data->fan[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN(i)); /* adjust fan clock divider on overflow */ @@ -747,30 +743,30 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) for (i = 0; i < 6; i++) { - data->in_min[i] = adm9240_read_value(client, + data->in_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_IN_MIN(i)); - data->in_max[i] = adm9240_read_value(client, + data->in_max[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_IN_MAX(i)); } for (i = 0; i < 2; i++) { - data->fan_min[i] = adm9240_read_value(client, + data->fan_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN_MIN(i)); } - data->temp_high = adm9240_read_value(client, + data->temp_high = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_HIGH); - data->temp_hyst = adm9240_read_value(client, + data->temp_hyst = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_HYST); /* read fan divs and 5-bit VID */ - i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); + i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); data->fan_div[0] = (i >> 4) & 3; data->fan_div[1] = (i >> 6) & 3; data->vid = i & 0x0f; - data->vid |= (adm9240_read_value(client, + data->vid |= (i2c_smbus_read_byte_data(client, ADM9240_REG_VID4) & 1) << 4; /* read analog out */ - data->aout = adm9240_read_value(client, + data->aout = i2c_smbus_read_byte_data(client, ADM9240_REG_ANALOG_OUT); data->last_updated_config = jiffies; -- cgit v1.2.3 From c7461a6652f40ce4f8e19d7368c7a807a618fb68 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Sat, 17 Sep 2005 05:32:57 +1000 Subject: [PATCH] hwmon: adm9240 driver update - dynamic sysfs hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks, reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1, removing the old driver macro mess. Run tested on Intel SE440BX-2 mobo. Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm9240.c | 342 +++++++++++++++++++++++------------------------- 1 file changed, 166 insertions(+), 176 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index ecef342e5fa3..8bb6d6e45ed5 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include #include @@ -69,8 +70,7 @@ I2C_CLIENT_INSMOD_3(adm9240, ds1780, lm81); #define ADM9240_REG_INT(nr) (0x41 + (nr)) #define ADM9240_REG_INT_MASK(nr) (0x43 + (nr)) #define ADM9240_REG_TEMP 0x27 -#define ADM9240_REG_TEMP_HIGH 0x39 -#define ADM9240_REG_TEMP_HYST 0x3a +#define ADM9240_REG_TEMP_MAX(nr) (0x39 + (nr)) /* 0, 1 = high, hyst */ #define ADM9240_REG_ANALOG_OUT 0x19 #define ADM9240_REG_CHASSIS_CLEAR 0x46 #define ADM9240_REG_VID_FAN_DIV 0x47 @@ -162,8 +162,7 @@ struct adm9240_data { u8 fan_min[2]; /* rw fan1_min */ u8 fan_div[2]; /* rw fan1_div, read-only accessor */ s16 temp; /* ro temp1_input, 9-bit sign-extended */ - s8 temp_high; /* rw temp1_max */ - s8 temp_hyst; /* rw temp1_max_hyst */ + s8 temp_max[2]; /* rw 0 -> temp_max, 1 -> temp_max_hyst */ u16 alarms; /* ro alarms */ u8 aout; /* rw aout_output */ u8 vid; /* ro vid */ @@ -173,157 +172,143 @@ struct adm9240_data { /*** sysfs accessors ***/ /* temperature */ -#define show_temp(value, scale) \ -static ssize_t show_##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct adm9240_data *data = adm9240_update_device(dev); \ - return sprintf(buf, "%d\n", data->value * scale); \ -} -show_temp(temp_high, 1000); -show_temp(temp_hyst, 1000); -show_temp(temp, 500); /* 0.5'C per bit */ - -#define set_temp(value, reg) \ -static ssize_t set_##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm9240_data *data = adm9240_update_device(dev); \ - long temp = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(temp); \ - i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} - -set_temp(temp_high, ADM9240_REG_TEMP_HIGH); -set_temp(temp_hyst, ADM9240_REG_TEMP_HYST); - -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp_high, set_temp_high); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_temp_hyst, set_temp_hyst); +static ssize_t show_temp(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", data->temp * 500); /* 9-bit value */ +} + +static ssize_t show_max(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000); +} + +static ssize_t set_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[attr->index] = TEMP_TO_REG(val); + i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index), + data->temp_max[attr->index]); + up(&data->update_lock); + return count; +} + static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_max, set_max, 0); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_max, set_max, 1); /* voltage */ -static ssize_t show_in(struct device *dev, char *buf, int nr) +static ssize_t show_in(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr)); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index], + attr->index)); } -static ssize_t show_in_min(struct device *dev, char *buf, int nr) +static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr)); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index], + attr->index)); } -static ssize_t show_in_max(struct device *dev, char *buf, int nr) +static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr)); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index], + attr->index)); } -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val, nr); - i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(nr), - data->in_min[nr]); + data->in_min[attr->index] = IN_TO_REG(val, attr->index); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index), + data->in_min[attr->index]); up(&data->update_lock); return count; } -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val, nr); - i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(nr), - data->in_max[nr]); + data->in_max[attr->index] = IN_TO_REG(val, attr->index); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index), + data->in_max[attr->index]); up(&data->update_lock); return count; } -#define show_in_offset(offset) \ -static ssize_t show_in##offset(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \ -static ssize_t show_in##offset##_min(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t \ -set_in##offset##_min(struct device *dev, \ - struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t \ -set_in##offset##_max(struct device *dev, \ - struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); -show_in_offset(5); +#define vin(nr) \ +static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \ + show_in, NULL, nr); \ +static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \ + show_in_min, set_in_min, nr); \ +static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \ + show_in_max, set_in_max, nr); + +vin(0); +vin(1); +vin(2); +vin(3); +vin(4); +vin(5); /* fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) +static ssize_t show_fan(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - 1 << data->fan_div[nr])); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index], + 1 << data->fan_div[attr->index])); } -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], - 1 << data->fan_div[nr])); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index], + 1 << data->fan_div[attr->index])); } -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +static ssize_t show_fan_div(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", 1 << data->fan_div[nr]); + return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]); } /* write new fan div, callers must hold data->update_lock */ @@ -352,12 +337,15 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr, * - otherwise: select fan clock divider to suit fan speed low limit, * measurement code may adjust registers to ensure fan speed reading */ -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); + int nr = attr->index; u8 new_div; down(&data->update_lock); @@ -404,40 +392,16 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, return count; } -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ -return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan_##offset, NULL); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_fan_##offset##_div, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); +#define fan(nr) \ +static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \ + show_fan, NULL, nr - 1); \ +static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \ + show_fan_div, NULL, nr - 1); \ +static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, set_fan_min, nr - 1); + +fan(1); +fan(2); /* alarms */ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) @@ -580,33 +544,59 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_detach; } - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, + &sensor_dev_attr_in0_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in0_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in0_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in1_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in2_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in2_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in3_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in3_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in3_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in4_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in4_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in4_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in5_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in5_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in5_max.dev_attr); device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max_hyst.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_div.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_div.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_min.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); device_create_file(&new_client->dev, &dev_attr_aout_output); device_create_file(&new_client->dev, &dev_attr_chassis_clear); @@ -674,9 +664,9 @@ static void adm9240_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(1), 255); i2c_smbus_write_byte_data(client, - ADM9240_REG_TEMP_HIGH, 127); + ADM9240_REG_TEMP_MAX(0), 127); i2c_smbus_write_byte_data(client, - ADM9240_REG_TEMP_HYST, 127); + ADM9240_REG_TEMP_MAX(1), 127); /* start measurement cycle */ i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); @@ -753,10 +743,10 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) data->fan_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN_MIN(i)); } - data->temp_high = i2c_smbus_read_byte_data(client, - ADM9240_REG_TEMP_HIGH); - data->temp_hyst = i2c_smbus_read_byte_data(client, - ADM9240_REG_TEMP_HYST); + data->temp_max[0] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(0)); + data->temp_max[1] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(1)); /* read fan divs and 5-bit VID */ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); -- cgit v1.2.3 From 088341bd0c78143bf82ff21f7f0a715f99568c73 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 10 Sep 2005 23:00:46 +0200 Subject: [PATCH] hwmon: via686a: save 0.5k by long v[256] -> s16 v[256] We can save 0.5kB of data in the via686a driver. From: Denis Vlasenko Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/via686a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 05ddc88e7dd2..60e94879f415 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -198,7 +198,7 @@ static inline u8 FAN_TO_REG(long rpm, int div) but the function is very linear in the useful range (0-80 deg C), so we'll just use linear interpolation for 10-bit readings.) So, tempLUT is the temp at via register values 0-255: */ -static const long tempLUT[] = +static const s16 tempLUT[] = { -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519, -503, -487, -471, -456, -442, -428, -414, -400, -387, -375, -362, -350, -339, -327, -316, -305, -295, -285, -275, -265, @@ -270,7 +270,7 @@ static inline u8 TEMP_TO_REG(long val) } /* for 8-bit temperature hyst and over registers */ -#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100) +#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100) /* for 10-bit temperature readings */ static inline long TEMP_FROM_REG10(u16 val) -- cgit v1.2.3 From e415e48b68155bea8b5452113dedba4ec486f3f6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:14:18 +0200 Subject: [PATCH] hwmon: adm9240 whitespace cleanups This whitespace cleanup patch removes one trailing space and breaks lines longer than 80 characters. Signed-off-by: Grant Coady Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) --- drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 8bb6d6e45ed5..11dc95f8a17e 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -219,8 +219,8 @@ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, - char *buf) +static ssize_t show_in_min(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -228,8 +228,8 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, - char *buf) +static ssize_t show_in_max(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -237,7 +237,8 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, +static ssize_t set_in_min(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -253,7 +254,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, +static ssize_t set_in_max(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -326,7 +328,7 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr, "to %u\n", nr + 1, 1 << old, 1 << fan_div); } -/* +/* * set fan speed low limit: * * - value is zero: disable fan speed low limit alarm @@ -404,7 +406,8 @@ fan(1); fan(2); /* alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%u\n", data->alarms); @@ -412,7 +415,8 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); /* vid */ -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vid(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); @@ -420,13 +424,16 @@ static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); /* analog output */ -static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_aout(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); } -static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t set_aout(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); @@ -441,7 +448,9 @@ static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); /* chassis_clear */ -static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t chassis_clear(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); unsigned long val = simple_strtol(buf, NULL, 10); -- cgit v1.2.3 From b918ecd2429e1a89b846d9e49ca4520b963c13e8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:18:49 +0200 Subject: [PATCH] hwmon: Do not forcibly enable via686a by default Do not enable the VIA VT82C686A/B integrated sensors by default, as disabled sensors usually means that this feature is not used so the values won't make any sense. This has been confusing many users in the past: http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052 It is still possible to forcibly enable the sensors by using the force_addr module parameter. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/hwmon/via686a | 17 +++++++++++++++-- drivers/hwmon/via686a.c | 18 +++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-) --- Documentation/hwmon/via686a | 17 +++++++++++++++-- drivers/hwmon/via686a.c | 18 +++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index b82014cb7c53..a936fb3824b2 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -18,8 +18,9 @@ Authors: Module Parameters ----------------- -force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards - that don't set the address in the BIOS. Does not do a +force_addr=0xaddr Set the I/O base address. Useful for boards that + don't set the address in the BIOS. Look for a BIOS + upgrade before resorting to this. Does not do a PCI force; the via686a must still be present in lspci. Don't use this unless the driver complains that the base address is not set. @@ -63,3 +64,15 @@ miss once-only alarms. The driver only updates its values each 1.5 seconds; reading it more often will do no harm, but will return 'old' values. + +Known Issues +------------ + +This driver handles sensors integrated in some VIA south bridges. It is +possible that a motherboard maker used a VT82C686A/B chip as part of a +product design but was not interested in its hardware monitoring features, +in which case the sensor inputs will not be wired. This is the case of +the Asus K7V, A7V and A7V133 motherboards, to name only a few of them. +So, if you need the force_addr parameter, and end up with values which +don't seem to make any sense, don't look any further: your chip is simply +not wired for hardware monitoring. diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 60e94879f415..688ccf924c3a 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -589,10 +589,8 @@ static int via686a_detect(struct i2c_adapter *adapter) u16 val; /* 8231 requires multiple of 256, we enforce that on 686 as well */ - if (force_addr) - address = force_addr & 0xFF00; - if (force_addr) { + address = force_addr & 0xFF00; dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address); if (PCIBIOS_SUCCESSFUL != @@ -603,11 +601,17 @@ static int via686a_detect(struct i2c_adapter *adapter) pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val)) return -ENODEV; if (!(val & 0x0001)) { - dev_warn(&adapter->dev, "enabling sensors\n"); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, - val | 0x0001)) + if (force_addr) { + dev_info(&adapter->dev, "enabling sensors\n"); + if (PCIBIOS_SUCCESSFUL != + pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, + val | 0x0001)) + return -ENODEV; + } else { + dev_warn(&adapter->dev, "sensors disabled - enable " + "with force_addr=0x%x\n", address); return -ENODEV; + } } /* Reserve the ISA region */ -- cgit v1.2.3 From 605070952f0b41caaa211c47b02eeac703529008 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:23:07 +0200 Subject: [PATCH] i2c: Discard explicit static initializations to 0 Kill explicit static initializations to 0 in 10 i2c drivers. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/algos/i2c-algo-pca.c | 2 +- drivers/i2c/algos/i2c-algo-sibyte.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 4 ++-- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- drivers/i2c/busses/i2c-sis5595.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- 10 files changed, 15 insertions(+), 15 deletions(-) --- drivers/i2c/algos/i2c-algo-pca.c | 2 +- drivers/i2c/algos/i2c-algo-sibyte.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 4 ++-- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- drivers/i2c/busses/i2c-sis5595.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- 10 files changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index beb10edfe9c1..82946acab4c7 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -34,7 +34,7 @@ #define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0) #define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0) -static int i2c_debug=0; +static int i2c_debug; #define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val) #define pca_inw(adap, reg) adap->read_byte(adap, reg) diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c index 8ed5ad12552f..938848ae162d 100644 --- a/drivers/i2c/algos/i2c-algo-sibyte.c +++ b/drivers/i2c/algos/i2c-algo-sibyte.c @@ -42,7 +42,7 @@ /* module parameters: */ -static int bit_scan=0; /* have a look at what's hanging 'round */ +static int bit_scan; /* have a look at what's hanging 'round */ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index b3f50bff39a0..e13d60c120b9 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -125,12 +125,12 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short ali15x3_smba = 0; +static unsigned short ali15x3_smba; static int ali15x3_setup(struct pci_dev *ALI15X3_dev) { diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 6ad0603384b8..3bbac2f8ce38 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -86,7 +86,7 @@ #define AMD756_BLOCK_DATA 0x05 -static unsigned short amd756_ioport = 0; +static unsigned short amd756_ioport; /* SMBUS event = I/O 28-29 bit 11 diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 7bd9102db701..745e3a51f3e5 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -43,7 +43,7 @@ #include "i2c-iop3xx.h" /* global unit counter */ -static int i2c_id = 0; +static int i2c_id; static inline unsigned char iic_cook_addr(struct i2c_msg *msg) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 6d48a4da7bed..1b2d3ebd1075 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -90,13 +90,13 @@ struct sd { /* If force is set to anything different from 0, we forcibly enable the PIIX4. DANGEROUS! */ -static int force = 0; +static int force; module_param (force, int, 0); MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ -static int force_addr = 0; +static int force_addr; module_param (force_addr, int, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " @@ -104,14 +104,14 @@ MODULE_PARM_DESC(force_addr, /* If fix_hstcfg is set to anything different from 0, we reset one of the registers to be a valid value. */ -static int fix_hstcfg = 0; +static int fix_hstcfg; module_param (fix_hstcfg, int, 0); MODULE_PARM_DESC(fix_hstcfg, "Fix config register. Needed on some boards (Force CPCI735)."); static int piix4_transaction(void); -static unsigned short piix4_smba = 0; +static unsigned short piix4_smba; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 080318d6f54b..3fd38f4673e3 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -123,11 +123,11 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short sis5595_base = 0; +static unsigned short sis5595_base; static u8 sis5595_read(u8 reg) { diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 86f0f448fa0b..44c4e68e9a98 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -101,7 +101,7 @@ module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); /* acpi base address */ -static unsigned short acpi_base = 0; +static unsigned short acpi_base; /* supported chips */ static int supported[] = { diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index ead2ff3cf60e..9ddd910c3b99 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -83,7 +83,7 @@ #define SIS96x_BLOCK_DATA 0x05 static struct i2c_adapter sis96x_adapter; -static u16 sis96x_smbus_base = 0; +static u16 sis96x_smbus_base; static inline u8 sis96x_read(u8 reg) { diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 040b8abeabba..0b3edd4e6c12 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -45,7 +45,7 @@ #define IOSPACE 0x06 #define IOTEXT "via-i2c" -static u16 pm_io_base = 0; +static u16 pm_io_base; /* It does not appear from the datasheet that the GPIO pins are -- cgit v1.2.3 From 0200296310a454b39efc995e676f9ff60e641edb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:26:44 +0200 Subject: [PATCH] hwmon: Discard explicit static initializations to 0 Kill explicit static initializations to 0 in 2 hwmon drivers. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index e928cdb041cb..58aee3a00caa 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -121,7 +121,7 @@ static int adm1021_write_value(struct i2c_client *client, u8 reg, static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only = 0; +static int read_only; /* This is the driver that will be inserted */ diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 688ccf924c3a..54861f13fee2 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -44,7 +44,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static unsigned short force_addr = 0; +static unsigned short force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors"); -- cgit v1.2.3 From 7d845b10d06fa20a595a5161edabc5e846ed28a6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:29:38 +0200 Subject: [PATCH] hwmon: Discard bogus comment about init setting limits Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-) --- drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index f6730dc3573b..d697a554286f 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -726,7 +726,6 @@ static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value) return i2c_smbus_write_byte_data(client, reg, value); } -/* Called when we have found a new LM78. It should set limits, etc. */ static void lm78_init_client(struct i2c_client *client) { u8 config = lm78_read_value(client, LM78_REG_CONFIG); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 54861f13fee2..c6e64f4abdea 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -712,7 +712,6 @@ static int via686a_detach_client(struct i2c_client *client) return 0; } -/* Called when we have found a new VIA686A. Set limits, etc. */ static void via686a_init_client(struct i2c_client *client) { u8 reg; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 3479dc5208e2..7f6f7280878d 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1275,7 +1275,6 @@ static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) return 0; } -/* Called when we have found a new W83781D. It should set limits, etc. */ static void w83627hf_init_client(struct i2c_client *client) { struct w83627hf_data *data = i2c_get_clientdata(client); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 4c43337ca780..26b1fac7c619 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1451,7 +1451,6 @@ w83781d_write_value(struct i2c_client *client, u16 reg, u16 value) return 0; } -/* Called when we have found a new W83781D. It should set limits, etc. */ static void w83781d_init_client(struct i2c_client *client) { diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index ba0c28015f6a..7bbd1888ce94 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1429,7 +1429,6 @@ w83792d_write_value(struct i2c_client *client, u8 reg, u8 value) return 0; } -/* Called when we have found a new W83792D. It should set limits, etc. */ static void w83792d_init_client(struct i2c_client *client) { -- cgit v1.2.3 From d6072f842a77014220683ee5b781b7cee8f020d1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:37:04 +0200 Subject: [PATCH] i2c: Reuse name strings in i2c bus drivers Clean up name string usage in 12 i2c bus drivers: * Use the i2c_adapter name for requesting the I/O region rather than redefining a new string. * Do not initialize the i2c_adapter name to "unset". This should save a few data bytes here and there. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-ali1535.c | 6 +++--- drivers/i2c/busses/i2c-ali1563.c | 6 ++++-- drivers/i2c/busses/i2c-ali15x3.c | 5 +++-- drivers/i2c/busses/i2c-amd756.c | 5 ++--- drivers/i2c/busses/i2c-amd8111.c | 4 +++- drivers/i2c/busses/i2c-i801.c | 4 ++-- drivers/i2c/busses/i2c-nforce2.c | 4 ++-- drivers/i2c/busses/i2c-piix4.c | 4 ++-- drivers/i2c/busses/i2c-sis5595.c | 5 +++-- drivers/i2c/busses/i2c-sis630.c | 6 ++++-- drivers/i2c/busses/i2c-sis96x.c | 5 +++-- drivers/i2c/busses/i2c-via.c | 4 ++-- 12 files changed, 33 insertions(+), 25 deletions(-) --- drivers/i2c/busses/i2c-ali1535.c | 6 +++--- drivers/i2c/busses/i2c-ali1563.c | 6 ++++-- drivers/i2c/busses/i2c-ali15x3.c | 5 +++-- drivers/i2c/busses/i2c-amd756.c | 5 ++--- drivers/i2c/busses/i2c-amd8111.c | 4 +++- drivers/i2c/busses/i2c-i801.c | 4 ++-- drivers/i2c/busses/i2c-nforce2.c | 4 ++-- drivers/i2c/busses/i2c-piix4.c | 4 ++-- drivers/i2c/busses/i2c-sis5595.c | 5 +++-- drivers/i2c/busses/i2c-sis630.c | 6 ++++-- drivers/i2c/busses/i2c-sis96x.c | 5 +++-- drivers/i2c/busses/i2c-via.c | 4 ++-- 12 files changed, 33 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f021acd2674e..3eb47890db40 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -134,7 +134,7 @@ /* -> Read = 1 */ #define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */ - +static struct pci_driver ali1535_driver; static unsigned short ali1535_smba; static DECLARE_MUTEX(i2c_ali1535_sem); @@ -162,7 +162,8 @@ static int ali1535_setup(struct pci_dev *dev) goto exit; } - if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) { + if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, + ali1535_driver.name)) { dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", ali1535_smba); goto exit; @@ -480,7 +481,6 @@ static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali1535_ids[] = { diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 86947504aea1..e6f63208fc4a 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -60,6 +60,7 @@ #define HST_CNTL2_SIZEMASK 0x38 +static struct pci_driver ali1563_pci_driver; static unsigned short ali1563_smba; static int ali1563_transaction(struct i2c_adapter * a, int size) @@ -350,7 +351,8 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } - if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) { + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, + ali1563_pci_driver.name)) { dev_warn(&dev->dev,"Could not allocate I/O space"); goto Err; } @@ -406,7 +408,7 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = { MODULE_DEVICE_TABLE (pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { - .name = "ali1563_i2c", + .name = "ali1563_smbus", .id_table = ali1563_id_table, .probe = ali1563_probe, .remove = __devexit_p(ali1563_remove), diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e13d60c120b9..7a5c0941dbc1 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -130,6 +130,7 @@ module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); +static struct pci_driver ali15x3_driver; static unsigned short ali15x3_smba; static int ali15x3_setup(struct pci_dev *ALI15X3_dev) @@ -166,7 +167,8 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev) if(force_addr) ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1); - if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) { + if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, + ali15x3_driver.name)) { dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region 0x%x already in use!\n", ali15x3_smba); @@ -470,7 +472,6 @@ static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali15x3_ids[] = { diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 3bbac2f8ce38..1750dedaf4b5 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -85,7 +85,7 @@ #define AMD756_PROCESS_CALL 0x04 #define AMD756_BLOCK_DATA 0x05 - +static struct pci_driver amd756_driver; static unsigned short amd756_ioport; /* @@ -303,7 +303,6 @@ struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; @@ -365,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, amd756_ioport += SMB_ADDR_OFFSET; } - if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) { + if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", amd756_ioport); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 45ea24ba14d5..49ff11e5134f 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -30,6 +30,8 @@ struct amd_smbus { int size; }; +static struct pci_driver amd8111_driver; + /* * AMD PCI control registers definitions. */ @@ -352,7 +354,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0")) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) goto out_kfree; smbus->adapter.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 709beab76609..588583530c9f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -110,6 +110,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, int command); static unsigned short i801_smba; +static struct pci_driver i801_driver; static struct pci_dev *I801_dev; static int isich4; @@ -143,7 +144,7 @@ static int i801_setup(struct pci_dev *dev) } } - if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) { + if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) { dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n", i801_smba); error_return = -EBUSY; @@ -543,7 +544,6 @@ static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id i801_ids[] = { diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index fe9c0f42a2b7..dd4b6d8e03ef 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -97,6 +97,7 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define NVIDIA_SMB_PRTCL_PEC 0x80 +static struct pci_driver nforce2_driver; static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, @@ -113,7 +114,6 @@ static struct i2c_adapter nforce2_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; /* Return -1 on error. See smbus.h for more information */ @@ -285,7 +285,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg, smbus->base = iobase & 0xfffc; smbus->size = 8; - if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) { + if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); return -1; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 1b2d3ebd1075..692f47345481 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -112,6 +112,7 @@ MODULE_PARM_DESC(fix_hstcfg, static int piix4_transaction(void); static unsigned short piix4_smba; +static struct pci_driver piix4_driver; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { @@ -157,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, } } - if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) { + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", piix4_smba); return -ENODEV; @@ -407,7 +408,6 @@ static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id piix4_ids[] = { diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 3fd38f4673e3..b57ab74d23ec 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -127,6 +127,7 @@ static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); +static struct pci_driver sis5595_driver; static unsigned short sis5595_base; static u8 sis5595_read(u8 reg) @@ -172,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) /* NB: We grab just the two SMBus registers here, but this may still * interfere with ACPI :-( */ - if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) { + if (!request_region(sis5595_base + SMB_INDEX, 2, + sis5595_driver.name)) { dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); return -ENODEV; @@ -364,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 44c4e68e9a98..acb75e282414 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -92,6 +92,8 @@ #define SIS630_PCALL 0x04 #define SIS630_BLOCK_DATA 0x05 +static struct pci_driver sis630_driver; + /* insmod parameters */ static int high_clock; static int force; @@ -432,7 +434,8 @@ static int sis630_setup(struct pci_dev *sis630_dev) dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) { + if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + sis630_driver.name)) { dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); goto exit; @@ -455,7 +458,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 9ddd910c3b99..3024907cdafe 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -82,6 +82,7 @@ #define SIS96x_PROC_CALL 0x04 #define SIS96x_BLOCK_DATA 0x05 +static struct pci_driver sis96x_driver; static struct i2c_adapter sis96x_adapter; static u16 sis96x_smbus_base; @@ -257,7 +258,6 @@ static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id sis96x_ids[] = { @@ -294,7 +294,8 @@ static int __devinit sis96x_probe(struct pci_dev *dev, sis96x_smbus_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) { + if (!request_region(sis96x_smbus_base, SMB_IOSIZE, + sis96x_driver.name)) { dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x " "already in use!\n", sis96x_smbus_base, sis96x_smbus_base + SMB_IOSIZE - 1); diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 0b3edd4e6c12..484bbacfce6b 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -43,8 +43,8 @@ /* io-region reservation */ #define IOSPACE 0x06 -#define IOTEXT "via-i2c" +static struct pci_driver vt586b_driver; static u16 pm_io_base; /* @@ -130,7 +130,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i pci_read_config_word(dev, base, &pm_io_base); pm_io_base &= (0xff << 8); - if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) { + if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) { dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE); return -ENODEV; } -- cgit v1.2.3 From 709439a284bc5b7d42a70fee7119feb186c1ca99 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:41:18 +0200 Subject: [PATCH] hwmon: w83l785ts converted to dynamic sysfs callbacks Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a small driver so the benefit is thin, but still worth it. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) --- drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 133e34ab1d0a..fcb2c39b04fd 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -37,6 +37,7 @@ #include #include #include +#include #include /* How many retries on register read error */ @@ -111,27 +112,24 @@ struct w83l785ts_data { unsigned long last_updated; /* in jiffies */ /* registers values */ - u8 temp, temp_over; + u8 temp[2]; /* 0: input + 1: critical limit */ }; /* * Sysfs stuff */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); } -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); /* * Real code @@ -228,7 +226,7 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) init_MUTEX(&data->update_lock); /* Default values in case the first read fails (unlikely). */ - data->temp_over = data->temp = 0; + data->temp[1] = data->temp[0] = 0; /* Tell the I2C layer a new client has arrived. */ if ((err = i2c_attach_client(new_client))) @@ -246,8 +244,10 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_detach; } - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); return 0; @@ -305,10 +305,10 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { dev_dbg(&client->dev, "Updating w83l785ts data.\n"); - data->temp = w83l785ts_read_value(client, - W83L785TS_REG_TEMP, data->temp); - data->temp_over = w83l785ts_read_value(client, - W83L785TS_REG_TEMP_OVER, data->temp_over); + data->temp[0] = w83l785ts_read_value(client, + W83L785TS_REG_TEMP, data->temp[0]); + data->temp[1] = w83l785ts_read_value(client, + W83L785TS_REG_TEMP_OVER, data->temp[1]); data->last_updated = jiffies; data->valid = 1; -- cgit v1.2.3 From cb929eae78ec0b243dbf58039bce4af354f6020c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:45:03 +0200 Subject: [PATCH] hwmon: Minor w83l785ts optimization Using s8 instead of u8 to store temperature register values saves a few instructions on sysfs file read. The very same was done for several other drivers a while ago (lm63, lm83, lm90...) Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index fcb2c39b04fd..db12a620b331 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -74,7 +74,7 @@ I2C_CLIENT_INSMOD_1(w83l785ts); * The W83L785TS-S uses signed 8-bit values. */ -#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) +#define TEMP_FROM_REG(val) ((val) * 1000) /* * Functions declaration @@ -112,7 +112,7 @@ struct w83l785ts_data { unsigned long last_updated; /* in jiffies */ /* registers values */ - u8 temp[2]; /* 0: input + s8 temp[2]; /* 0: input 1: critical limit */ }; -- cgit v1.2.3 From 4366dc946c01305cff49b07dabb806d2364f1edb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:50:06 +0200 Subject: [PATCH] i2c: Adjust i2c_probe() for busses without SMBUS_QUICK Move the check for SMBUS_QUICK in i2c_probe() after the forced addresses have been handled. This makes it possible for a driver to leave the probed address lists empty, only providing forced addresses, and get i2c_probe to work even if the bus doesn't support SMBUS_QUICK. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/i2c-core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) --- drivers/i2c/i2c-core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 45aa0e54e297..b55097d57b7a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -706,10 +706,6 @@ int i2c_probe(struct i2c_adapter *adapter, int i, err; int adap_id = i2c_adapter_id(adapter); - /* Forget it if we can't probe using SMBUS_QUICK */ - if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK)) - return -1; - /* Force entries are done first, and are not affected by ignore entries */ if (address_data->forces) { @@ -736,6 +732,17 @@ int i2c_probe(struct i2c_adapter *adapter, } } + /* Stop here if we can't use SMBUS_QUICK */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { + if (address_data->probe[0] == I2C_CLIENT_END + && address_data->normal_i2c[0] == I2C_CLIENT_END) + return 0; + + dev_warn(&adapter->dev, "SMBus Quick command not supported, " + "can't probe for chips\n"); + return -1; + } + /* Probe entries are done second, and are not affected by ignore entries either */ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { -- cgit v1.2.3 From 0f69a612f950f7508e556bf1b09390087d112115 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:58:22 +0200 Subject: [PATCH] i2c: Minor i2c-amd8111 cleanup I noticed a useless instruction in the i2c-amd8111 driver. Signed-off-by: Jean Delvare CC: Vojtech Pavlik Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-amd8111.c | 1 - 1 file changed, 1 deletion(-) --- drivers/i2c/busses/i2c-amd8111.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 49ff11e5134f..6200c9a087ad 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -244,7 +244,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl break; case I2C_SMBUS_BLOCK_PROC_CALL: - protocol |= pec; len = min_t(u8, data->block[0], 31); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); -- cgit v1.2.3 From 5c50d1885981537ff3b8df6433951de6c9cb72cb Mon Sep 17 00:00:00 2001 From: Hideki Iwamoto Date: Sun, 25 Sep 2005 17:01:11 +0200 Subject: [PATCH] i2c: Several PEC-related fixes in software SMBus emulation Fix several errors in I2C SMBus emulation when PEC is used: * Weird logic error in SMBus Write Word transactions. * Wrong buffer size, affecting SMBus Block Write transactions. * Potential buffer overrun in SMBus Block Write transactions. From: Hideki Iwamoto Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/i2c-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- drivers/i2c/i2c-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b55097d57b7a..9583a54ce16b 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -864,7 +864,7 @@ static int i2c_smbus_add_pec(u16 addr, u8 command, int size, break; case I2C_SMBUS_BYTE_DATA: buf[2] = data->byte; - data->word = buf[2] || + data->word = buf[2] | (i2c_smbus_pec(3, buf, NULL) << 8); size = I2C_SMBUS_WORD_DATA; break; @@ -1033,8 +1033,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, need to use only one message; when reading, we need two. We initialize most things with sane defaults, to keep the code below somewhat simpler. */ - unsigned char msgbuf0[34]; - unsigned char msgbuf1[34]; + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; int num = read_write == I2C_SMBUS_READ?2:1; struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, { addr, flags | I2C_M_RD, 0, msgbuf1 } @@ -1097,7 +1097,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, } if(size == I2C_SMBUS_BLOCK_DATA_PEC) (msg[0].len)++; - for (i = 1; i <= msg[0].len; i++) + for (i = 1; i < msg[0].len; i++) msgbuf0[i] = data->block[i-1]; } break; -- cgit v1.2.3 From 5f49ef8e8cefe0a95948b4270db28507c1c287d4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 21:50:47 +0200 Subject: [PATCH] i2c-viapro: Coding style fixes Before I go on cleaning up and improving the i2c-viapro driver, let's fix all the coding style issues: mostly trailing white space, and spaces used where tabs should be. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/busses/i2c-viapro | 12 ++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------ 2 files changed, 43 insertions(+), 45 deletions(-) --- Documentation/i2c/busses/i2c-viapro | 12 +++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------- 2 files changed, 43 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 702f5ac68c09..ef0f1e94e726 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -4,17 +4,17 @@ Supported adapters: * VIA Technologies, Inc. VT82C596A/B Datasheet: Sometimes available at the VIA website - * VIA Technologies, Inc. VT82C686A/B + * VIA Technologies, Inc. VT82C686A/B Datasheet: Sometimes available at the VIA website * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237 Datasheet: available on request from Via Authors: - Frodo Looijaard , - Philip Edelbrock , - Kyösti Mälkki , - Mark D. Studebaker + Frodo Looijaard , + Philip Edelbrock , + Kyösti Mälkki , + Mark D. Studebaker Module Parameters ----------------- @@ -43,5 +43,3 @@ Your lspci -n listing must show one of these : If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. - - diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 99d209e0485a..262755e1ae02 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -1,7 +1,7 @@ /* i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998 - 2002 Frodo Looijaard , + Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker @@ -46,9 +46,9 @@ static struct pci_dev *vt596_pdev; -#define SMBBA1 0x90 -#define SMBBA2 0x80 -#define SMBBA3 0xD0 +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 /* SMBus address offsets */ static unsigned short vt596_smba; @@ -68,26 +68,26 @@ static unsigned short vt596_smba; /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, - We try to select the better one*/ + We try to select the better one */ static unsigned short smb_cf_hstcfg = 0xD2; -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +#define SMBHSTCFG (smb_cf_hstcfg) +#define SMBSLVC (smb_cf_hstcfg + 1) +#define SMBSHDW1 (smb_cf_hstcfg + 2) +#define SMBSHDW2 (smb_cf_hstcfg + 3) +#define SMBREV (smb_cf_hstcfg + 4) /* Other settings */ #define MAX_TIMEOUT 500 #define ENABLE_INT9 0 /* VT82C596 constants */ -#define VT596_QUICK 0x00 -#define VT596_BYTE 0x04 -#define VT596_BYTE_DATA 0x08 -#define VT596_WORD_DATA 0x0C -#define VT596_BLOCK_DATA 0x14 +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 /* If force is set to anything different from 0, we forcibly enable the @@ -115,19 +115,19 @@ static int vt596_transaction(void) int timeout = 0; dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting...\n", temp); - + "Resetting...\n", temp); + outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); - + return -1; } else { dev_dbg(&vt596_adapter.dev, "Successfull!\n"); @@ -137,7 +137,7 @@ static int vt596_transaction(void) /* start the transaction by setting bit 6 */ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); - /* We will always wait for a fraction of a second! + /* We will always wait for a fraction of a second! I don't know if VIA needs this, Intel did */ do { msleep(1); @@ -177,16 +177,16 @@ static int vt596_transaction(void) dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); - + return result; } /* Return -1 on error. */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, u8 command, - int size, union i2c_smbus_data *data) + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) { int i, len; @@ -256,7 +256,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, case VT596_BYTE: /* Where is the result put? I assume here it is in * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs + * SMBHSTCMD. No clue in the docs */ data->byte = inb_p(SMBHSTDAT0); break; @@ -302,7 +302,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, { unsigned char temp; int error = -ENODEV; - + /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -333,10 +333,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev, return -ENODEV; } - found: +found: if (!request_region(vt596_smba, 8, "viapro-smbus")) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", - vt596_smba); + vt596_smba); return -ENODEV; } @@ -348,13 +348,13 @@ static int __devinit vt596_probe(struct pci_dev *pdev, pci_write_config_word(pdev, id->driver_data, vt596_smba); pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " - "address 0x%04x!\n", vt596_smba); + "address 0x%04x!\n", vt596_smba); } else if ((temp & 1) == 0) { if (force) { - /* NOTE: This assumes I/O space and other allocations - * WERE done by the Bios! Don't complain if your - * hardware does weird things after enabling this. - * :') Check for Bios updates before resorting to + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to * this. */ pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); @@ -381,8 +381,8 @@ static int __devinit vt596_probe(struct pci_dev *pdev, vt596_adapter.dev.parent = &pdev->dev; snprintf(vt596_adapter.name, I2C_NAME_SIZE, - "SMBus Via Pro adapter at %04x", vt596_smba); - + "SMBus Via Pro adapter at %04x", vt596_smba); + vt596_pdev = pci_dev_get(pdev); if (i2c_add_adapter(&vt596_adapter)) { pci_dev_put(vt596_pdev); @@ -395,7 +395,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, */ return -ENODEV; - release_region: +release_region: release_region(vt596_smba, 8); return error; } @@ -420,7 +420,7 @@ static struct pci_device_id vt596_ids[] = { { 0, } }; -MODULE_DEVICE_TABLE (pci, vt596_ids); +MODULE_DEVICE_TABLE(pci, vt596_ids); static struct pci_driver vt596_driver = { .name = "vt596_smbus", -- cgit v1.2.3 From f118301416953d677de738100c33eb8cfb7adecb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 21:58:41 +0200 Subject: [PATCH] i2c-viapro: Implement I2C Block transactions Implement the I2C block transactions on VIA chips which support them: VT82C686B, VT8233, VT8233A, VT8235 and VT8237R. This speeds up EEPROM accesses by a factor 10 or so. I would like to thank Antonino A. Daplas, Hinko Kocevar, Salah Coronya and Andreas Henriksson for their help in testing this new feature. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/busses/i2c-viapro | 7 +++++- drivers/i2c/busses/i2c-viapro.c | 39 +++++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 4 deletions(-) --- Documentation/i2c/busses/i2c-viapro | 7 ++++++- drivers/i2c/busses/i2c-viapro.c | 39 ++++++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index ef0f1e94e726..387cbd4015fc 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -14,7 +14,8 @@ Authors: Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , - Mark D. Studebaker + Mark D. Studebaker , + Jean Delvare Module Parameters ----------------- @@ -43,3 +44,7 @@ Your lspci -n listing must show one of these : If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. + +Except for the oldest chips (VT82C596A/B, VT82C686A and most probably +VT8231), this driver supports I2C block transactions. Such transactions +are mainly useful to read from and write to EEPROMs. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 262755e1ae02..b420e752b1dc 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,6 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker + Copyright (C) 2005 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -88,6 +89,7 @@ static unsigned short smb_cf_hstcfg = 0xD2; #define VT596_BYTE_DATA 0x08 #define VT596_WORD_DATA 0x0C #define VT596_BLOCK_DATA 0x14 +#define VT596_I2C_BLOCK_DATA 0x34 /* If force is set to anything different from 0, we forcibly enable the @@ -107,6 +109,9 @@ MODULE_PARM_DESC(force_addr, static struct i2c_adapter vt596_adapter; +#define FEATURE_I2CBLOCK (1<<0) +static unsigned int vt596_features; + /* Another internally used function */ static int vt596_transaction(void) { @@ -225,6 +230,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } size = VT596_WORD_DATA; break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (!(vt596_features & FEATURE_I2CBLOCK)) + return -1; + if (read_write == I2C_SMBUS_READ) + outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); + /* Fall through */ case I2C_SMBUS_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -240,11 +251,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } - size = VT596_BLOCK_DATA; + size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ? + VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA; break; } - outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + outb_p((size & 0x3C) + (ENABLE_INT9 & 1), SMBHSTCNT); if (vt596_transaction()) /* Error in transaction */ return -1; @@ -266,6 +278,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, case VT596_WORD_DATA: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; + case VT596_I2C_BLOCK_DATA: case VT596_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] > I2C_SMBUS_BLOCK_MAX) @@ -280,9 +293,13 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, static u32 vt596_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; + + if (vt596_features & FEATURE_I2CBLOCK) + func |= I2C_FUNC_SMBUS_I2C_BLOCK; + return func; } static struct i2c_algorithm smbus_algorithm = { @@ -379,6 +396,22 @@ found: dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_8237: + case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8233_0: + vt596_features |= FEATURE_I2CBLOCK; + break; + case PCI_DEVICE_ID_VIA_82C686_4: + /* The VT82C686B (rev 0x40) does support I2C block + transactions, but the VT82C686A (rev 0x30) doesn't */ + if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp) + && temp >= 0x40) + vt596_features |= FEATURE_I2CBLOCK; + break; + } + vt596_adapter.dev.parent = &pdev->dev; snprintf(vt596_adapter.name, I2C_NAME_SIZE, "SMBus Via Pro adapter at %04x", vt596_smba); -- cgit v1.2.3 From c2f559d5df5751780c0bd3ea0bd0aa17d47c0b39 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:01:07 +0200 Subject: [PATCH] i2c-viapro: Code cleanups Cleanups to the i2c-viapro driver: * Kill unused defines. * Kill interrupt-related code, as the driver doesn't use interrupts. * Fix broken comments (some copied from i2c-piix4.) * Centralize the unsupported command error case in vt596_access. That way we'll catch all unsupported commands, not only I2C_SMBUS_PROC_CALL. * Refactor some code. * Convert some dev_dbg into dev_err. Errors better be reported even in non-debug mode. * Do not verify that the final reset succeeded. It'll be checked at the beginning of the next transaction anyway. * Use the driver name to reserve the I/O region. * Do not print the contents of the SMBREV register, it reads 0 on all chips I've seen so far. * Some other minor fixes all over the place. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 122 +++++++++++++--------------------------- 1 file changed, 41 insertions(+), 81 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 122 ++++++++++++++-------------------------- 1 file changed, 41 insertions(+), 81 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index b420e752b1dc..5cf8fe182806 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -54,34 +53,22 @@ static struct pci_dev *vt596_pdev; /* SMBus address offsets */ static unsigned short vt596_smba; #define SMBHSTSTS (vt596_smba + 0) -#define SMBHSLVSTS (vt596_smba + 1) #define SMBHSTCNT (vt596_smba + 2) #define SMBHSTCMD (vt596_smba + 3) #define SMBHSTADD (vt596_smba + 4) #define SMBHSTDAT0 (vt596_smba + 5) #define SMBHSTDAT1 (vt596_smba + 6) #define SMBBLKDAT (vt596_smba + 7) -#define SMBSLVCNT (vt596_smba + 8) -#define SMBSHDWCMD (vt596_smba + 9) -#define SMBSLVEVT (vt596_smba + 0xA) -#define SMBSLVDAT (vt596_smba + 0xC) /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, We try to select the better one */ -static unsigned short smb_cf_hstcfg = 0xD2; - -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +static unsigned short SMBHSTCFG = 0xD2; /* Other settings */ #define MAX_TIMEOUT 500 -#define ENABLE_INT9 0 /* VT82C596 constants */ #define VT596_QUICK 0x00 @@ -107,12 +94,13 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); +static struct pci_driver vt596_driver; static struct i2c_adapter vt596_adapter; #define FEATURE_I2CBLOCK (1<<0) static unsigned int vt596_features; -/* Another internally used function */ +/* Return -1 on error, 0 on success */ static int vt596_transaction(void) { int temp; @@ -127,23 +115,21 @@ static int vt596_transaction(void) /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting...\n", temp); + "Resetting... ", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); - + printk("Failed! (0x%02x)\n", temp); return -1; } else { - dev_dbg(&vt596_adapter.dev, "Successfull!\n"); + printk("Successful!\n"); } } - /* start the transaction by setting bit 6 */ - outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + /* Start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x40, SMBHSTCNT); - /* We will always wait for a fraction of a second! - I don't know if VIA needs this, Intel did */ + /* We will always wait for a fraction of a second */ do { msleep(1); temp = inb_p(SMBHSTSTS); @@ -152,33 +138,32 @@ static int vt596_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { result = -1; - dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n"); + dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } if (temp & 0x10) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n"); + dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", + inb_p(SMBHSTCNT) & 0x3C); } if (temp & 0x08) { result = -1; - dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be " - "locked until next hard\nreset. (sorry!)\n"); - /* Clock stops and slave is stuck in mid-transmission */ + dev_err(&vt596_adapter.dev, "SMBus collision!\n"); } if (temp & 0x04) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: no response!\n"); + /* Quick commands are used to probe for chips, so + errors are expected, and we don't want to frighten the + user. */ + if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK) + dev_err(&vt596_adapter.dev, "Transaction error!\n"); } - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + /* Resetting status register */ + if (temp & 0x1F) outb_p(temp, SMBHSTSTS); - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_warn(&vt596_adapter.dev, "Failed reset at end " - "of transaction (%02x)\n", temp); - } - } dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), @@ -188,41 +173,29 @@ static int vt596_transaction(void) return result; } -/* Return -1 on error. */ +/* Return -1 on error, 0 on success */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { - int i, len; + int i; switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_info(&vt596_adapter.dev, - "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; case I2C_SMBUS_QUICK: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); size = VT596_QUICK; break; case I2C_SMBUS_BYTE: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = VT596_BYTE; break; case I2C_SMBUS_BYTE_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0); size = VT596_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0); @@ -232,31 +205,30 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: if (!(vt596_features & FEATURE_I2CBLOCK)) - return -1; + goto exit_unsupported; if (read_write == I2C_SMBUS_READ) outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); /* Fall through */ case I2C_SMBUS_BLOCK_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { - len = data->block[0]; - if (len < 0) - len = 0; + u8 len = data->block[0]; if (len > I2C_SMBUS_BLOCK_MAX) len = I2C_SMBUS_BLOCK_MAX; outb_p(len, SMBHSTDAT0); - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ? VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA; break; + default: + goto exit_unsupported; } - outb_p((size & 0x3C) + (ENABLE_INT9 & 1), SMBHSTCNT); + outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); + outb_p((size & 0x3C), SMBHSTCNT); if (vt596_transaction()) /* Error in transaction */ return -1; @@ -266,12 +238,6 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, switch (size) { case VT596_BYTE: - /* Where is the result put? I assume here it is in - * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs - */ - data->byte = inb_p(SMBHSTDAT0); - break; case VT596_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0); break; @@ -283,12 +249,17 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] > I2C_SMBUS_BLOCK_MAX) data->block[0] = I2C_SMBUS_BLOCK_MAX; - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; } return 0; + +exit_unsupported: + dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", + size); + return -1; } static u32 vt596_func(struct i2c_adapter *adapter) @@ -311,7 +282,6 @@ static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static int __devinit vt596_probe(struct pci_dev *pdev, @@ -328,12 +298,12 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) || - !(vt596_smba & 0x1)) { + !(vt596_smba & 0x0001)) { /* try 2nd address and config reg. for 596 */ if (id->device == PCI_DEVICE_ID_VIA_82C596_3 && !pci_read_config_word(pdev, SMBBA2, &vt596_smba) && - (vt596_smba & 0x1)) { - smb_cf_hstcfg = 0x84; + (vt596_smba & 0x0001)) { + SMBHSTCFG = 0x84; } else { /* no matches at all */ dev_err(&pdev->dev, "Cannot configure " @@ -351,7 +321,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } found: - if (!request_region(vt596_smba, 8, "viapro-smbus")) { + if (!request_region(vt596_smba, 8, vt596_driver.name)) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", vt596_smba); return -ENODEV; @@ -366,7 +336,7 @@ found: pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " "address 0x%04x!\n", vt596_smba); - } else if ((temp & 1) == 0) { + } else if (!(temp & 0x01)) { if (force) { /* NOTE: This assumes I/O space and other allocations * WERE done by the Bios! Don't complain if your @@ -374,7 +344,7 @@ found: * :') Check for Bios updates before resorting to * this. */ - pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); + pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_info(&pdev->dev, "Enabling SMBus device\n"); } else { dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " @@ -384,16 +354,6 @@ found: } } - if ((temp & 0x0E) == 8) - dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n"); - else if ((temp & 0x0E) == 0) - dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n"); - else - dev_dbg(&pdev->dev, "Illegal Interrupt configuration " - "(or code out of date)!\n"); - - pci_read_config_byte(pdev, SMBREV, &temp); - dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { -- cgit v1.2.3 From aaf7f1477668f34dda65aba17e87c0bc2ebe84d1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:09:07 +0200 Subject: [PATCH] i2c-viapro: Update supported devices list Make it clearer which chips are supported by the i2c-viapro driver, and which support I2C block transactions. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/busses/i2c-viapro | 12 ++++++------ drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++--------- 2 files changed, 19 insertions(+), 15 deletions(-) --- Documentation/i2c/busses/i2c-viapro | 12 ++++++------ drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++--------- 2 files changed, 19 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 387cbd4015fc..9363b8bd6109 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -29,18 +29,18 @@ Description ----------- i2c-viapro is a true SMBus host driver for motherboards with one of the -supported VIA southbridges. +supported VIA south bridges. Your lspci -n listing must show one of these : - device 1106:3050 (VT82C596 function 3) - device 1106:3051 (VT82C596 function 3) + device 1106:3050 (VT82C596A function 3) + device 1106:3051 (VT82C596B function 3) device 1106:3057 (VT82C686 function 4) device 1106:3074 (VT8233) device 1106:3147 (VT8233A) - device 1106:8235 (VT8231) - devide 1106:3177 (VT8235) - devide 1106:3227 (VT8237) + device 1106:8235 (VT8231 function 4) + device 1106:3177 (VT8235) + device 1106:3227 (VT8237R) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 5cf8fe182806..3be476cd4bc5 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -22,15 +22,19 @@ */ /* - Supports Via devices: - 82C596A/B (0x3050) - 82C596B (0x3051) - 82C686A/B - 8231 - 8233 - 8233A (0x3147 and 0x3177) - 8235 - 8237 + Supports the following VIA south bridges: + + Chip name PCI ID REV I2C block + VT82C596A 0x3050 no + VT82C596B 0x3051 no + VT82C686A 0x3057 0x30 no + VT82C686B 0x3057 0x40 yes + VT8231 0x8235 no? + VT8233 0x3074 yes + VT8233A 0x3147 yes? + VT8235 0x3177 yes + VT8237R 0x3227 yes + Note: we assume there can only be one device, with one SMBus interface. */ -- cgit v1.2.3 From 50c1cc339ca72f7cb95d440d384346f4238dc494 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:15:53 +0200 Subject: [PATCH] i2c-viapro: Refactor control outb By slightly shifting the interface between vt596_access and vt596_transaction, we can save two I/O accesses per SMBus transaction. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 3be476cd4bc5..a89a21264d37 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -105,7 +105,7 @@ static struct i2c_adapter vt596_adapter; static unsigned int vt596_features; /* Return -1 on error, 0 on success */ -static int vt596_transaction(void) +static int vt596_transaction(u8 size) { int temp; int result = 0; @@ -131,7 +131,7 @@ static int vt596_transaction(void) } /* Start the transaction by setting bit 6 */ - outb_p(inb(SMBHSTCNT) | 0x40, SMBHSTCNT); + outb_p(0x40 | (size & 0x3C), SMBHSTCNT); /* We will always wait for a fraction of a second */ do { @@ -232,9 +232,8 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); - outb_p((size & 0x3C), SMBHSTCNT); - if (vt596_transaction()) /* Error in transaction */ + if (vt596_transaction(size)) /* Error in transaction */ return -1; if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) -- cgit v1.2.3 From ed5453e54f0c4a29605fd8399f58649d8739f5f0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:23:32 +0200 Subject: [PATCH] i2c-viapro: Improve register dump Improve the register dump used to debug the i2c-viapro driver. The original dump was missing the HSTSTS register and the block data buffer. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index a89a21264d37..c1c9eb1d714f 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -104,6 +104,30 @@ static struct i2c_adapter vt596_adapter; #define FEATURE_I2CBLOCK (1<<0) static unsigned int vt596_features; +#ifdef DEBUG +static void vt596_dump_regs(const char *msg, u8 size) +{ + dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x " + "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + if (size == VT596_BLOCK_DATA + || size == VT596_I2C_BLOCK_DATA) { + int i; + + dev_dbg(&vt596_adapter.dev, "BLK="); + for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("\n"); + dev_dbg(&vt596_adapter.dev, " "); + for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("%02x\n", inb_p(SMBBLKDAT)); + } +} +#endif + /* Return -1 on error, 0 on success */ static int vt596_transaction(u8 size) { @@ -111,10 +135,9 @@ static int vt596_transaction(u8 size) int result = 0; int timeout = 0; - dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); +#ifdef DEBUG + vt596_dump_regs("Transaction (pre)", size); +#endif /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { @@ -169,10 +192,9 @@ static int vt596_transaction(u8 size) if (temp & 0x1F) outb_p(temp, SMBHSTSTS); - dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); +#ifdef DEBUG + vt596_dump_regs("Transaction (post)", size); +#endif return result; } -- cgit v1.2.3 From ca68f1193e8fc86470d4222d563d13b5584dc4f8 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 22 Sep 2005 22:23:32 +0200 Subject: [PATCH] i2c-viapro: Cleanup ifdef usage It's not nice to put #ifdef in the middle of functions. CC: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index c1c9eb1d714f..566342d50c5f 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -126,6 +126,8 @@ static void vt596_dump_regs(const char *msg, u8 size) printk("%02x\n", inb_p(SMBBLKDAT)); } } +#else +static inline void vt596_dump_regs(const char *msg, u8 size) { } #endif /* Return -1 on error, 0 on success */ @@ -135,9 +137,7 @@ static int vt596_transaction(u8 size) int result = 0; int timeout = 0; -#ifdef DEBUG vt596_dump_regs("Transaction (pre)", size); -#endif /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { @@ -192,9 +192,7 @@ static int vt596_transaction(u8 size) if (temp & 0x1F) outb_p(temp, SMBHSTSTS); -#ifdef DEBUG vt596_dump_regs("Transaction (post)", size); -#endif return result; } -- cgit v1.2.3 From 8a1b028bca95b5af36e94a660c4d284fe3313f74 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:04:48 +0200 Subject: [PATCH] i2c: Add missing i2c-ixp2000/4xx adapter name The ixp4xx and ixp2000 i2c bus drivers omit to fill the required i2c_adapter name field. Copy the device driver name field there. Signed-off-by: Jean Delvare Signed-off-by: Deepak Saxena Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ixp2000.c | 4 ++++ drivers/i2c/busses/i2c-ixp4xx.c | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 1956af382cd8..9dee505ceed2 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -36,6 +36,8 @@ #include /* Pick up IXP2000-specific bits */ #include +static struct device_driver ixp2000_i2c_driver; + static inline int ixp2000_scl_pin(void *data) { return ((struct ixp2000_i2c_pins*)data)->scl_pin; @@ -121,6 +123,8 @@ static int ixp2000_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP2000, + strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data, drv_data->adapter.dev.parent = &plat_dev->dev; diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index f6f5ca31fdba..013981df38af 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -35,6 +35,8 @@ #include /* Pick up IXP4xx-specific bits */ +static struct device_driver ixp4xx_i2c_driver; + static inline int ixp4xx_scl_pin(void *data) { return ((struct ixp4xx_i2c_pins*)data)->scl_pin; @@ -129,6 +131,8 @@ static int ixp4xx_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP4XX; + strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data; drv_data->adapter.dev.parent = &plat_dev->dev; -- cgit v1.2.3 From e8aafcb2bba1fe122907161701a167e38174c7a5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:06:27 +0200 Subject: [PATCH] i2c: Cleanup i2c-dev ioctl debug message Cleanup the ioctl debug message in i2c-dev. In particular, the minor number is redundant now that the minor number and the adapter number are kept in sync. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index aa7a4fadef64..89f54a5e8484 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -177,8 +177,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, int i,datasize,res; unsigned long funcs; - dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n", - iminor(inode),cmd, arg); + dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n", + cmd, arg); switch ( cmd ) { case I2C_SLAVE: -- cgit v1.2.3 From ada0c2f8fa087dc1dbc34e096c318739b1d6381a Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Fri, 7 Oct 2005 23:11:03 +0200 Subject: [PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014) This patch changes w83627hf and w83627ehf drivers to reserve only ports 0x295-0x296, instead of full 0x290-0x297 range. While some other sensors chips respond to all addresses in 0x290-0x297 range, Winbond chips respond to 0x295-0x296 only (this behavior is implied by documentation, and matches behavior observed on real systems). This is not problem alone, as no BIOS was found to put something at these unused addresses, and sensors chip itself provides nothing there as well. But in addition to only respond to these two addresses, also BIOS vendors report in their ACPI-PnP structures that there is some resource at I/O address 0x295 of length 2. And when later this hwmon driver attempts to request region with base 0x290/length 8, it fails as one request_region cannot span more than one device. Due to this we have to ask only for region this hardware really occupies, otherwise driver cannot be loaded on systems with ACPI-PnP enabled. Signed-off-by: Petr Vandrovec Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627ehf.c | 13 ++++++++----- drivers/hwmon/w83627hf.c | 21 +++++++++++++-------- 2 files changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index b60efe8f8b26..685eeb766809 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -105,7 +105,9 @@ superio_exit(void) * ISA constants */ -#define REGION_LENGTH 8 +#define REGION_ALIGNMENT ~7 +#define REGION_OFFSET 5 +#define REGION_LENGTH 2 #define ADDR_REG_OFFSET 5 #define DATA_REG_OFFSET 6 @@ -673,7 +675,8 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) struct w83627ehf_data *data; int i, err = 0; - if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) { + if (!request_region(address + REGION_OFFSET, REGION_LENGTH, + w83627ehf_driver.name)) { err = -EBUSY; goto exit; } @@ -762,7 +765,7 @@ exit_detach: exit_free: kfree(data); exit_release: - release_region(address, REGION_LENGTH); + release_region(address + REGION_OFFSET, REGION_LENGTH); exit: return err; } @@ -776,7 +779,7 @@ static int w83627ehf_detach_client(struct i2c_client *client) if ((err = i2c_detach_client(client))) return err; - release_region(client->addr, REGION_LENGTH); + release_region(client->addr + REGION_OFFSET, REGION_LENGTH); kfree(data); return 0; @@ -807,7 +810,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr) superio_select(W83627EHF_LD_HWM); val = (superio_inb(SIO_REG_ADDR) << 8) | superio_inb(SIO_REG_ADDR + 1); - *addr = val & ~(REGION_LENGTH - 1); + *addr = val & REGION_ALIGNMENT; if (*addr == 0) { superio_exit(); return -ENODEV; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 7f6f7280878d..494274d27f01 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -142,10 +142,14 @@ superio_exit(void) #define WINB_BASE_REG 0x60 /* Constants specified below */ -/* Length of ISA address segment */ -#define WINB_EXTENT 8 +/* Alignment of the base address */ +#define WINB_ALIGNMENT ~7 -/* Where are the ISA address/data registers relative to the base address */ +/* Offset & size of I/O region we are interested in */ +#define WINB_REGION_OFFSET 5 +#define WINB_REGION_SIZE 2 + +/* Where are the sensors address/data registers relative to the base address */ #define W83781D_ADDR_REG_OFFSET 5 #define W83781D_DATA_REG_OFFSET 6 @@ -981,7 +985,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr) superio_select(W83627HF_LD_HWM); val = (superio_inb(WINB_BASE_REG) << 8) | superio_inb(WINB_BASE_REG + 1); - *addr = val & ~(WINB_EXTENT - 1); + *addr = val & WINB_ALIGNMENT; if (*addr == 0 && force_addr == 0) { superio_exit(); return -ENODEV; @@ -1000,9 +1004,10 @@ static int w83627hf_detect(struct i2c_adapter *adapter) const char *client_name = ""; if(force_addr) - address = force_addr & ~(WINB_EXTENT - 1); + address = force_addr & WINB_ALIGNMENT; - if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) { + if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE, + w83627hf_driver.name)) { err = -EBUSY; goto ERROR0; } @@ -1148,7 +1153,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) ERROR2: kfree(data); ERROR1: - release_region(address, WINB_EXTENT); + release_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE); ERROR0: return err; } @@ -1163,7 +1168,7 @@ static int w83627hf_detach_client(struct i2c_client *client) if ((err = i2c_detach_client(client))) return err; - release_region(client->addr, WINB_EXTENT); + release_region(client->addr + WINB_REGION_OFFSET, WINB_REGION_SIZE); kfree(data); return 0; -- cgit v1.2.3 From 47b8b103f7f50d56568eb8d6cff0e3a2373f0eb3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:56:46 +0200 Subject: [PATCH] i2c: Cleanup i2c-i801 ifdefs No more need to check for PEC support being available now that both the i2c-core and the i2c-i801 drivers are part of the Linux kernel source tree. It's just there. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-i801.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 588583530c9f..413930cafc49 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,10 +52,6 @@ #include #include -#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC -#define HAVE_PEC -#endif - /* I801 SMBus address offsets */ #define SMBHSTSTS (0 + i801_smba) #define SMBHSTCNT (2 + i801_smba) @@ -392,7 +388,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } -#ifdef HAVE_PEC if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { /* wait for INTR bit as advised by Intel */ timeout = 0; @@ -407,7 +402,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } outb_p(temp, SMBHSTSTS); } -#endif result = 0; END: if (command == I2C_SMBUS_I2C_BLOCK_DATA) { @@ -426,10 +420,8 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, int block = 0; int ret, xact = 0; -#ifdef HAVE_PEC if(isich4) hwpec = (flags & I2C_CLIENT_PEC) != 0; -#endif switch (size) { case I2C_SMBUS_QUICK: @@ -464,11 +456,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: -#ifdef HAVE_PEC case I2C_SMBUS_BLOCK_DATA_PEC: if(hwpec && size == I2C_SMBUS_BLOCK_DATA) size = I2C_SMBUS_BLOCK_DATA_PEC; -#endif outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); @@ -480,13 +470,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } -#ifdef HAVE_PEC if(isich4 && hwpec) { if(size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA) outb_p(1, SMBAUXCTL); /* enable HW PEC */ } -#endif if(block) ret = i801_block_transaction(data, read_write, size); else { @@ -494,13 +482,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, ret = i801_transaction(); } -#ifdef HAVE_PEC if(isich4 && hwpec) { if(size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA) outb_p(0, SMBAUXCTL); } -#endif if(block) return ret; @@ -527,12 +513,8 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK -#ifdef HAVE_PEC | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | - I2C_FUNC_SMBUS_HWPEC_CALC - : 0) -#endif - ; + I2C_FUNC_SMBUS_HWPEC_CALC : 0); } static struct i2c_algorithm smbus_algorithm = { -- cgit v1.2.3 From 91749996287c230671788014f422f72e594e7b86 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:10:00 +0200 Subject: [PATCH] hwmon: Drop legacy ISA address support from it87 Drop legacy ISA address support from the it87 driver. All supported chips are Super-I/O chips, so the device ISA address can be safely read from Super-I/O space rather than blindly assumed. Two nearby inaccurate documentation statements have been fixed as well: * The IT8705F doesn't have an SMBus interface. * The SiS950 doesn't have a distinct prefix. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/it87 | 8 ++++---- drivers/hwmon/it87.c | 51 +++++++++++------------------------------------- 2 files changed, 15 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 0d0195040d88..7f42e441c645 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -4,18 +4,18 @@ Kernel driver it87 Supported chips: * IT8705F Prefix: 'it87' - Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports) + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ * IT8712F Prefix: 'it8712' Addresses scanned: I2C 0x28 - 0x2f - from Super I/O config space, or default ISA 0x290 (8 I/O ports) + from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ * SiS950 [clone of IT8705F] - Prefix: 'sis950' - Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports) + Prefix: 'it87' + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: No longer be available Author: Christophe Gauthron diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 53cc2b6d6385..55e1c835a046 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -2,7 +2,7 @@ it87.c - Part of lm_sensors, Linux kernel modules for hardware monitoring. - Supports: IT8705F Super I/O chip w/LPC interface & SMBus + Supports: IT8705F Super I/O chip w/LPC interface IT8712F Super I/O chip w/LPC interface & SMBus Sis950 A clone of the IT8705F @@ -47,7 +47,7 @@ /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned short isa_address = 0x290; +static unsigned short isa_address; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(it87, it8712); @@ -706,7 +706,7 @@ static int it87_isa_attach_adapter(struct i2c_adapter *adapter) } /* SuperIO detection - will change isa_address if a chip is found */ -static int __init it87_find(int *address) +static int __init it87_find(unsigned short *address) { int err = -ENODEV; @@ -757,34 +757,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) if (!request_region(address, IT87_EXTENT, it87_isa_driver.name)) goto ERROR0; - /* Probe whether there is anything available on this address. Already - done for SMBus and Super-I/O clients */ - if (kind < 0) { - if (is_isa && !chip_type) { -#define REALLY_SLOW_IO - /* We need the timeouts for at least some IT87-like chips. But only - if we read 'undefined' registers. */ - i = inb_p(address + 1); - if (inb_p(address + 2) != i - || inb_p(address + 3) != i - || inb_p(address + 7) != i) { - err = -ENODEV; - goto ERROR1; - } -#undef REALLY_SLOW_IO - - /* Let's just hope nothing breaks here */ - i = inb_p(address + 5) & 0x7f; - outb_p(~i & 0x7f, address + 5); - if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { - outb_p(i, address + 5); - err = -ENODEV; - goto ERROR1; - } - } - } - - /* OK. For now, we presume we have a valid client. We now create the + /* For now, we presume we have a valid client. We create the client structure, even though we cannot fill it completely yet. But it allows us to access it87_{read,write}_value. */ @@ -1182,20 +1155,18 @@ static struct it87_data *it87_update_device(struct device *dev) static int __init sm_it87_init(void) { - int addr, res; - - if (!it87_find(&addr)) { - isa_address = addr; - } + int res; res = i2c_add_driver(&it87_driver); if (res) return res; - res = i2c_isa_add_driver(&it87_isa_driver); - if (res) { - i2c_del_driver(&it87_driver); - return res; + if (!it87_find(&isa_address)) { + res = i2c_isa_add_driver(&it87_isa_driver); + if (res) { + i2c_del_driver(&it87_driver); + return res; + } } return 0; -- cgit v1.2.3 From 862bc36f682b25dd97833f702b4f8c97661b8811 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:12:01 +0200 Subject: [PATCH] hwmon: Drop useless w83627hf initialization step Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627hf.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 494274d27f01..48270819ff99 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -201,7 +201,6 @@ superio_exit(void) #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B -#define W83627HF_REG_PWMCLK12 0x5C #define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ #define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ @@ -1373,12 +1372,6 @@ static void w83627hf_init_client(struct i2c_client *client) } } - if (type == w83627hf) { - /* enable PWM2 control (can't hurt since PWM reg - should have been reset to 0xff) */ - w83627hf_write_value(client, W83627HF_REG_PWMCLK12, - 0x19); - } /* enable comparator mode for temp2 and temp3 so alarm indication will work correctly */ i = w83627hf_read_value(client, W83781D_REG_IRQ); -- cgit v1.2.3 From 30dac7469741906436b50f9413dccd446366d371 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:15:59 +0200 Subject: [PATCH] i2c: Drop I2C_SMBUS_I2C_BLOCK_MAX Drop I2C_SMBUS_I2C_BLOCK_MAX, use I2C_SMBUS_BLOCK_MAX instead. I2C_SMBUS_I2C_BLOCK_MAX has always been defined to the same value as I2C_SMBUS_BLOCK_MAX, and this will never change: setting it to a lower value would make no sense, setting it to a higher value would break i2c_smbus_data compatibility. There is no point in changing i2c_smbus_data to support larger block transactions in SMBus mode, as no SMBus hardware supports more than 32 byte blocks. Thus, for larger transactions, direct I2C transfers are the way to go. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/eeprom.c | 4 ++-- drivers/i2c/i2c-core.c | 8 ++++---- include/linux/i2c.h | 1 - 3 files changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index d58403a47908..7fb739c43935 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -88,8 +88,8 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice) dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX) - if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX) + for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX) + if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX) goto exit; } else { if (i2c_smbus_write_byte(client, slice << 5)) { diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 9583a54ce16b..15354176ff63 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1108,10 +1108,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, return -1; case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { - msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX; + msg[1].len = I2C_SMBUS_BLOCK_MAX; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) { + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with " "invalid block write size (%d)\n", data->block[0]); @@ -1144,8 +1144,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: /* fixed at 32 for now */ - data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX; - for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) data->block[i+1] = msgbuf1[i]; break; } diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 74103d0a8cd2..64c13c042f9d 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -448,7 +448,6 @@ struct i2c_msg { * Data for SMBus Messages */ #define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */ union i2c_smbus_data { __u8 byte; __u16 word; -- cgit v1.2.3 From 6c129be8c7bd1bdbd47ba8e17f6e5053ef04aee8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:17:35 +0200 Subject: [PATCH] i2c: Rename i2c-parport variable to avoid confusion It's a bit confusing to name a variable the same as an unrelated structure. The compiler doesn't complain, but it certainly makes the code harder to understand, and could confuse grep and LXR among others. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-parport.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 71a2502fe069..fa506187fbe1 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -232,7 +232,7 @@ static void i2c_parport_detach (struct parport *port) } } -static struct parport_driver i2c_driver = { +static struct parport_driver i2c_parport_driver = { .name = "i2c-parport", .attach = i2c_parport_attach, .detach = i2c_parport_detach, @@ -250,12 +250,12 @@ static int __init i2c_parport_init(void) type = 0; } - return parport_register_driver(&i2c_driver); + return parport_register_driver(&i2c_parport_driver); } static void __exit i2c_parport_exit(void) { - parport_unregister_driver(&i2c_driver); + parport_unregister_driver(&i2c_parport_driver); } MODULE_AUTHOR("Jean Delvare "); -- cgit v1.2.3 From 00bffb6e29c5ef12cea7904905f8b959187076c9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:19:52 +0200 Subject: [PATCH] i2c: Drop meaningless use of I2C_DF_NOTIFY in i2c_client structures I2C_DF_NOTIFY is an i2c_driver flag, using it as an i2c_client flag doesn't make any sense. Signed-off-by: Jean Delvare Acked-by: Mark A. Greer Acked-by: Randy Vinson Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/ds1374.c | 1 - drivers/i2c/chips/m41t00.c | 1 - drivers/i2c/chips/rtc8564.c | 2 +- 3 files changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index 0936327a946d..ec640e9f085a 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -199,7 +199,6 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); - client->flags = I2C_DF_NOTIFY; client->addr = addr; client->adapter = adap; client->driver = &ds1374_driver; diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 3f14528a52a9..554f7ba61627 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -180,7 +180,6 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind) memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE); - client->flags = I2C_DF_NOTIFY; client->addr = addr; client->adapter = adap; client->driver = &m41t00_driver; diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c index 0b5385c892b1..dd9d42d7b6e7 100644 --- a/drivers/i2c/chips/rtc8564.c +++ b/drivers/i2c/chips/rtc8564.c @@ -158,7 +158,7 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); i2c_set_clientdata(new_client, d); - new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY; + new_client->flags = I2C_CLIENT_ALLOW_USE; new_client->addr = addr; new_client->adapter = adap; new_client->driver = &rtc8564_driver; -- cgit v1.2.3 From 3634ff6a32e90d9db0ec19297e80059143c1aa7f Mon Sep 17 00:00:00 2001 From: Stig Telfer Date: Sat, 8 Oct 2005 00:21:48 +0200 Subject: [PATCH] i2c: Fix i2c-elektor on Alpha This patch updates the i2c-elektor driver, enabling it to compile cleanly, load and run. The key change is that it uses the new __iomem/iowrite8/ioread8 functions to abstract the direct or memory-mapped variants of register access. Also, the original driver would crash on module load on the Alpha because the PCI memory region was not remapped into kernel memory. I have managed the following testing: * compiled and tested it on my Alpha UP2000+ system. * compiles cleanly for x86 but I don't have the hardware to test. Signed-off-by: Stig Telfer Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-elektor.c | 74 ++++++++++++++++++++++++++-------------- 1 file changed, 49 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 6930b660e508..75b4b442a636 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -46,6 +46,8 @@ #define DEFAULT_BASE 0x330 static int base; +static u8 __iomem *base_iomem; + static int irq; static int clock = 0x1c; static int own = 0x55; @@ -64,36 +66,27 @@ static spinlock_t lock; static void pcf_isa_setbyte(void *data, int ctl, int val) { - int address = ctl ? (base + 1) : base; + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; /* enable irq if any specified for serial operation */ if (ctl && irq && (val & I2C_PCF_ESO)) { val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255); - - switch (mmapped) { - case 0: /* regular I/O */ - outb(val, address); - break; - case 2: /* double mapped I/O needed for UP2000 board, - I don't know why this... */ - writeb(val, (void *)address); - /* fall */ - case 1: /* memory mapped I/O */ - writeb(val, (void *)address); - break; - } + pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val); + iowrite8(val, address); +#ifdef __alpha__ + /* API UP2000 needs some hardware fudging to make the write stick */ + iowrite8(val, address); +#endif } static int pcf_isa_getbyte(void *data, int ctl) { - int address = ctl ? (base + 1) : base; - int val = mmapped ? readb((void *)address) : inb(address); - - pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val); + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; + int val = ioread8(address); + pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val); return (val); } @@ -155,7 +148,30 @@ static int pcf_isa_init(void) "is in use.\n", base); return -ENODEV; } + base_iomem = ioport_map(base, 2); + if (!base_iomem) { + printk(KERN_ERR "i2c-elektor: remap of I/O region " + "%#x failed\n", base); + release_region(base, 2); + return -ENODEV; + } + } else { + if (!request_mem_region(base, 2, "i2c-elektor")) { + printk(KERN_ERR "i2c-elektor: requested memory region " + "(%#x:2) is in use\n", base); + return -ENODEV; + } + base_iomem = ioremap(base, 2); + if (base_iomem == NULL) { + printk(KERN_ERR "i2c-elektor: remap of memory region " + "%#x failed\n", base); + release_mem_region(base, 2); + return -ENODEV; + } } + pr_debug("i2c-elektor: registers %#x remapped to %p\n", base, + base_iomem); + if (irq > 0) { if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); @@ -200,7 +216,7 @@ static int __init i2c_pcfisa_init(void) cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { - char config; + unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { @@ -219,9 +235,7 @@ static int __init i2c_pcfisa_init(void) if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; - /* I don't know why we need to - write twice */ - mmapped = 2; + mmapped = 1; /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ @@ -262,8 +276,13 @@ static int __init i2c_pcfisa_init(void) free_irq(irq, NULL); } - if (!mmapped) + if (!mmapped) { + ioport_unmap(base_iomem); release_region(base , 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } return -ENODEV; } @@ -276,8 +295,13 @@ static void i2c_pcfisa_exit(void) free_irq(irq, NULL); } - if (!mmapped) + if (!mmapped) { + ioport_unmap(base_iomem); release_region(base , 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } } MODULE_AUTHOR("Hans Berglund "); -- cgit v1.2.3 From fe3d6a99782d5345b1927e872d77d1778668094b Mon Sep 17 00:00:00 2001 From: Stig Telfer Date: Sat, 8 Oct 2005 00:23:27 +0200 Subject: [PATCH] i2c: Big i2c-elektor cleanup Cleanups to the i2c-elektor driver: * Set the i2c_adapter name field to "i2c-elektor" and use this string in all resource requests and printks. * Change space-padding for tab indentation, kill trailing white space, remove space before comma. * Use dev_info, pr_info and pr_debug instead of printk. * Lines chopped to 80 columns. Signed-off-by: Stig Telfer Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-elektor.c | 84 +++++++++++++++++++++------------------- 1 file changed, 45 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 75b4b442a636..59f8308c2356 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -22,7 +22,7 @@ /* With some changes from Kyösti Mälkki and even Frodo Looijaard */ -/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of +/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of for Alpha Processor Inc. UP-2000(+) boards */ #include @@ -53,7 +53,7 @@ static int clock = 0x1c; static int own = 0x55; static int mmapped; -/* vdovikin: removed static struct i2c_pcf_isa gpi; code - +/* vdovikin: removed static struct i2c_pcf_isa gpi; code - this module in real supports only one device, due to missing arguments in some functions, called from the algo-pcf module. Sometimes it's need to be rewriten - but for now just remove this for simpler reading */ @@ -62,6 +62,8 @@ static wait_queue_head_t pcf_wait; static int pcf_pending; static spinlock_t lock; +static struct i2c_adapter pcf_isa_ops; + /* ----- local functions ---------------------------------------------- */ static void pcf_isa_setbyte(void *data, int ctl, int val) @@ -73,7 +75,7 @@ static void pcf_isa_setbyte(void *data, int ctl, int val) val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val); + pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val); iowrite8(val, address); #ifdef __alpha__ /* API UP2000 needs some hardware fudging to make the write stick */ @@ -86,7 +88,7 @@ static int pcf_isa_getbyte(void *data, int ctl) u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; int val = ioread8(address); - pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val); + pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val); return (val); } @@ -142,39 +144,40 @@ static int pcf_isa_init(void) { spin_lock_init(&lock); if (!mmapped) { - if (!request_region(base, 2, "i2c (isa bus adapter)")) { - printk(KERN_ERR - "i2c-elektor: requested I/O region (0x%X:2) " - "is in use.\n", base); + if (!request_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested I/O region (%#x:2) is " + "in use\n", pcf_isa_ops.name, base); return -ENODEV; } base_iomem = ioport_map(base, 2); if (!base_iomem) { - printk(KERN_ERR "i2c-elektor: remap of I/O region " - "%#x failed\n", base); + printk(KERN_ERR "%s: remap of I/O region %#x failed\n", + pcf_isa_ops.name, base); release_region(base, 2); return -ENODEV; } } else { - if (!request_mem_region(base, 2, "i2c-elektor")) { - printk(KERN_ERR "i2c-elektor: requested memory region " - "(%#x:2) is in use\n", base); + if (!request_mem_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested memory region (%#x:2) " + "is in use\n", pcf_isa_ops.name, base); return -ENODEV; } base_iomem = ioremap(base, 2); if (base_iomem == NULL) { - printk(KERN_ERR "i2c-elektor: remap of memory region " - "%#x failed\n", base); + printk(KERN_ERR "%s: remap of memory region %#x " + "failed\n", pcf_isa_ops.name, base); release_mem_region(base, 2); return -ENODEV; } } - pr_debug("i2c-elektor: registers %#x remapped to %p\n", base, + pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base, base_iomem); if (irq > 0) { - if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { - printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); + if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name, + NULL) < 0) { + printk(KERN_ERR "%s: Request irq%d failed\n", + pcf_isa_ops.name, irq); irq = 0; } else enable_irq(irq); @@ -202,45 +205,49 @@ static struct i2c_adapter pcf_isa_ops = { .class = I2C_CLASS_HWMON, .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, - .name = "PCF8584 ISA adapter", + .name = "i2c-elektor", }; -static int __init i2c_pcfisa_init(void) +static int __init i2c_pcfisa_init(void) { #ifdef __alpha__ - /* check to see we have memory mapped PCF8584 connected to the + /* check to see we have memory mapped PCF8584 connected to the Cypress cy82c693 PCI-ISA bridge as on UP2000 board */ if (base == 0) { struct pci_dev *cy693_dev; - - cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, + + cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { - - pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config); + + pr_debug("%s: found cy82c693, config " + "register 0x47 = 0x%02x\n", + pcf_isa_ops.name, config); /* UP2000 board has this register set to 0xe1, - but the most significant bit as seems can be + but the most significant bit as seems can be reset during the proper initialisation - sequence if guys from API decides to do that - (so, we can even enable Tsunami Pchip - window for the upper 1 Gb) */ + sequence if guys from API decides to do that + (so, we can even enable Tsunami Pchip + window for the upper 1 Gb) */ /* so just check for ROMCS at 0xe0000, - ROMCS enabled for writes + ROMCS enabled for writes and external XD Bus buffer in use. */ if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; mmapped = 1; - /* UP2000 drives ISA with + /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ clock = I2C_PCF_CLK | I2C_PCF_TRNS90; - printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n"); + pr_info("%s: found API UP2000 like " + "board, will probe PCF8584 " + "later\n", pcf_isa_ops.name); } } pci_dev_put(cy693_dev); @@ -250,12 +257,11 @@ static int __init i2c_pcfisa_init(void) /* sanity checks for mmapped I/O */ if (mmapped && base < 0xc8000) { - printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base); + printk(KERN_ERR "%s: incorrect base address (%#x) specified " + "for mmapped I/O\n", pcf_isa_ops.name, base); return -ENODEV; } - printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n"); - if (base == 0) { base = DEFAULT_BASE; } @@ -265,8 +271,8 @@ static int __init i2c_pcfisa_init(void) return -ENODEV; if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) goto fail; - - printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base); + + dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base); return 0; @@ -278,7 +284,7 @@ static int __init i2c_pcfisa_init(void) if (!mmapped) { ioport_unmap(base_iomem); - release_region(base , 2); + release_region(base, 2); } else { iounmap(base_iomem); release_mem_region(base, 2); @@ -297,7 +303,7 @@ static void i2c_pcfisa_exit(void) if (!mmapped) { ioport_unmap(base_iomem); - release_region(base , 2); + release_region(base, 2); } else { iounmap(base_iomem); release_mem_region(base, 2); -- cgit v1.2.3 From ccd7aa0cc9413b79b69f6cd7c18daa1c22dfa512 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:47:48 +0200 Subject: [PATCH] Owner field additions to many i2c drivers, 1 of 5 This patch updates .owner field for various struct pci_driver variables. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ali1535.c | 1 + drivers/i2c/busses/i2c-ali1563.c | 1 + drivers/i2c/busses/i2c-ali15x3.c | 1 + drivers/i2c/busses/i2c-amd756.c | 1 + drivers/i2c/busses/i2c-amd8111.c | 1 + drivers/i2c/busses/i2c-hydra.c | 1 + drivers/i2c/busses/i2c-i801.c | 1 + drivers/i2c/busses/i2c-i810.c | 1 + drivers/i2c/busses/i2c-nforce2.c | 1 + drivers/i2c/busses/i2c-piix4.c | 1 + drivers/i2c/busses/i2c-prosavage.c | 1 + drivers/i2c/busses/i2c-savage4.c | 1 + drivers/i2c/busses/i2c-sis5595.c | 1 + drivers/i2c/busses/i2c-sis630.c | 1 + drivers/i2c/busses/i2c-sis96x.c | 1 + drivers/i2c/busses/i2c-via.c | 1 + drivers/i2c/busses/i2c-viapro.c | 1 + drivers/i2c/busses/i2c-voodoo3.c | 1 + 18 files changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 3eb47890db40..ba90f5140af6 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -513,6 +513,7 @@ static void __devexit ali1535_remove(struct pci_dev *dev) } static struct pci_driver ali1535_driver = { + .owner = THIS_MODULE, .name = "ali1535_smbus", .id_table = ali1535_ids, .probe = ali1535_probe, diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index e6f63208fc4a..f1a62d892425 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -408,6 +408,7 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = { MODULE_DEVICE_TABLE (pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { + .owner = THIS_MODULE, .name = "ali1563_smbus", .id_table = ali1563_id_table, .probe = ali1563_probe, diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 7a5c0941dbc1..400b08ed4299 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -504,6 +504,7 @@ static void __devexit ali15x3_remove(struct pci_dev *dev) } static struct pci_driver ali15x3_driver = { + .owner = THIS_MODULE, .name = "ali15x3_smbus", .id_table = ali15x3_ids, .probe = ali15x3_probe, diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 1750dedaf4b5..de035d137c3f 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -401,6 +401,7 @@ static void __devexit amd756_remove(struct pci_dev *dev) } static struct pci_driver amd756_driver = { + .owner = THIS_MODULE, .name = "amd756_smbus", .id_table = amd756_ids, .probe = amd756_probe, diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 6200c9a087ad..0d29e78dff63 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -392,6 +392,7 @@ static void __devexit amd8111_remove(struct pci_dev *dev) } static struct pci_driver amd8111_driver = { + .owner = THIS_MODULE, .name = "amd8111_smbus2", .id_table = amd8111_ids, .probe = amd8111_probe, diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index e0cb3b0f92fa..1b5354e24bf5 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -155,6 +155,7 @@ static void __devexit hydra_remove(struct pci_dev *dev) static struct pci_driver hydra_driver = { + .owner = THIS_MODULE, .name = "hydra_smbus", .id_table = hydra_ids, .probe = hydra_probe, diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 413930cafc49..e90b6c4e7da3 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -568,6 +568,7 @@ static void __devexit i801_remove(struct pci_dev *dev) } static struct pci_driver i801_driver = { + .owner = THIS_MODULE, .name = "i801_smbus", .id_table = i801_ids, .probe = i801_probe, diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 0ff7016e0629..1b3393b7c461 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -232,6 +232,7 @@ static void __devexit i810_remove(struct pci_dev *dev) } static struct pci_driver i810_driver = { + .owner = THIS_MODULE, .name = "i810_smbus", .id_table = i810_ids, .probe = i810_probe, diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index dd4b6d8e03ef..5dc62114cc8d 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -356,6 +356,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev) } static struct pci_driver nforce2_driver = { + .owner = THIS_MODULE, .name = "nForce2_smbus", .id_table = nforce2_ids, .probe = nforce2_probe, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 692f47345481..7d63eec423fe 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -462,6 +462,7 @@ static void __devexit piix4_remove(struct pci_dev *dev) } static struct pci_driver piix4_driver = { + .owner = THIS_MODULE, .name = "piix4_smbus", .id_table = piix4_ids, .probe = piix4_probe, diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 83fd16d61ce5..92b744273577 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -308,6 +308,7 @@ static struct pci_device_id prosavage_pci_tbl[] = { MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl); static struct pci_driver prosavage_driver = { + .owner = THIS_MODULE, .name = "prosavage_smbus", .id_table = prosavage_pci_tbl, .probe = prosavage_probe, diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 0c8518298e4d..aebe87ba4033 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -179,6 +179,7 @@ static void __devexit savage4_remove(struct pci_dev *dev) } static struct pci_driver savage4_driver = { + .owner = THIS_MODULE, .name = "savage4_smbus", .id_table = savage4_ids, .probe = savage4_probe, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index b57ab74d23ec..3ad27c3ba15b 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -398,6 +398,7 @@ static void __devexit sis5595_remove(struct pci_dev *dev) } static struct pci_driver sis5595_driver = { + .owner = THIS_MODULE, .name = "sis5595_smbus", .id_table = sis5595_ids, .probe = sis5595_probe, diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index acb75e282414..7f49e5fd3ff0 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -496,6 +496,7 @@ static void __devexit sis630_remove(struct pci_dev *dev) static struct pci_driver sis630_driver = { + .owner = THIS_MODULE, .name = "sis630_smbus", .id_table = sis630_ids, .probe = sis630_probe, diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 3024907cdafe..6a134c091324 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -329,6 +329,7 @@ static void __devexit sis96x_remove(struct pci_dev *dev) } static struct pci_driver sis96x_driver = { + .owner = THIS_MODULE, .name = "sis96x_smbus", .id_table = sis96x_ids, .probe = sis96x_probe, diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 484bbacfce6b..544a38e64394 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -159,6 +159,7 @@ static void __devexit vt586b_remove(struct pci_dev *dev) static struct pci_driver vt586b_driver = { + .owner = THIS_MODULE, .name = "vt586b_smbus", .id_table = vt586b_ids, .probe = vt586b_probe, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 566342d50c5f..c9366b504833 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -439,6 +439,7 @@ static struct pci_device_id vt596_ids[] = { MODULE_DEVICE_TABLE(pci, vt596_ids); static struct pci_driver vt596_driver = { + .owner = THIS_MODULE, .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b675773b0cc1..650c3ebde84c 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -225,6 +225,7 @@ static void __devexit voodoo3_remove(struct pci_dev *dev) } static struct pci_driver voodoo3_driver = { + .owner = THIS_MODULE, .name = "voodoo3_smbus", .id_table = voodoo3_ids, .probe = voodoo3_probe, -- cgit v1.2.3 From 0cf3628181660be4e21fe520766dcbc3da9d71c8 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:51:37 +0200 Subject: [PATCH] Owner field additions to many i2c drivers, 2 of 5 This patch updates the .owner field for various struct xxxx_driver variables, other than pci_driver. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Acked-by: Mark A. Greer Acked-by: Ben Dooks Acked-by: Deepak Saxena Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-iop3xx.c | 1 + drivers/i2c/busses/i2c-ixp2000.c | 1 + drivers/i2c/busses/i2c-ixp4xx.c | 1 + drivers/i2c/busses/i2c-mpc.c | 1 + drivers/i2c/busses/i2c-mv64xxx.c | 1 + drivers/i2c/busses/i2c-s3c2410.c | 2 ++ drivers/i2c/chips/isp1301_omap.c | 1 + 7 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 745e3a51f3e5..0f7dfd8f4546 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -525,6 +525,7 @@ out: static struct device_driver iop3xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IOP3xx-I2C", .bus = &platform_bus_type, .probe = iop3xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 9dee505ceed2..c3292dc743f1 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -146,6 +146,7 @@ static int ixp2000_i2c_probe(struct device *dev) } static struct device_driver ixp2000_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP2000-I2C", .bus = &platform_bus_type, .probe = ixp2000_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 013981df38af..3169280c25a6 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -155,6 +155,7 @@ static int ixp4xx_i2c_probe(struct device *dev) } static struct device_driver ixp4xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP4XX-I2C", .bus = &platform_bus_type, .probe = ixp4xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f065583ddcf1..b81c54620030 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -361,6 +361,7 @@ static int fsl_i2c_remove(struct device *device) /* Structure for a device driver */ static struct device_driver fsl_i2c_driver = { + .owner = THIS_MODULE, .name = "fsl-i2c", .bus = &platform_bus_type, .probe = fsl_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 99abca45fece..69709ee0b896 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -570,6 +570,7 @@ mv64xxx_i2c_remove(struct device *dev) } static struct device_driver mv64xxx_i2c_driver = { + .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, .bus = &platform_bus_type, .probe = mv64xxx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 69fa282df2d5..6ced28e90070 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -896,6 +896,7 @@ static int s3c24xx_i2c_resume(struct device *dev) /* device driver for platform bus bits */ static struct device_driver s3c2410_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2410-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, @@ -904,6 +905,7 @@ static struct device_driver s3c2410_i2c_driver = { }; static struct device_driver s3c2440_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2440-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 8ee56d4b3891..eaa4742e04fa 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -888,6 +888,7 @@ static int otg_remove(struct device *dev) } struct device_driver omap_otg_driver = { + .owner = THIS_MODULE, .name = "omap_otg", .bus = &platform_bus_type, .probe = otg_probe, -- cgit v1.2.3 From e78f857cc5299c3f6b3d046084696ef205948837 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:53:52 +0200 Subject: [PATCH] Owner field additions to many i2c drivers, 3 of 5 This patch updates the .owner field for various struct xxxx_driver variables which are available on PPC_MAC arch. This one was _not_ even compile-tested... Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-keywest.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index eff5896ce865..34e43c8d8d5e 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -716,6 +716,7 @@ static struct of_device_id i2c_keywest_match[] = static struct macio_driver i2c_keywest_macio_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_macio, @@ -724,6 +725,7 @@ static struct macio_driver i2c_keywest_macio_driver = static struct of_platform_driver i2c_keywest_of_platform_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_of_platform, -- cgit v1.2.3 From 6586bcd7b2bbe255110b2db772da4415c7865a2a Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:54:45 +0200 Subject: [PATCH] Owner field additions to many i2c drivers, 4 of 5 This patch updates the .owner field for the i2c core struct xxxx_driver variables. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 15354176ff63..0040981b6698 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -85,6 +85,7 @@ void i2c_adapter_dev_release(struct device *dev) } struct device_driver i2c_adapter_driver = { + .owner = THIS_MODULE, .name = "i2c_adapter", .bus = &i2c_bus_type, .probe = i2c_device_probe, @@ -98,6 +99,7 @@ static void i2c_adapter_class_dev_release(struct class_device *dev) } struct class i2c_adapter_class = { + .owner = THIS_MODULE, .name = "i2c-adapter", .release = &i2c_adapter_class_dev_release, }; @@ -291,6 +293,7 @@ int i2c_add_driver(struct i2c_driver *driver) down(&core_lists); /* add the driver to the list of i2c drivers in the driver core */ + driver->driver.owner = driver->owner; driver->driver.name = driver->name; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_device_probe; -- cgit v1.2.3 From 1747ef1b8c9b7b9c6a9aae3543a9b99acabb7e10 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:58:35 +0200 Subject: [PATCH] Owner field additions to many i2c drivers, 5 of 5 In function i2c_isa_add_driver, copied driver should inherit the owner field as well as the name field. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-isa.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index bdc6806dafae..4fdc02411609 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -92,6 +92,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver) /* Add the driver to the list of i2c drivers in the driver core */ driver->driver.name = driver->name; + driver->driver.owner = driver->owner; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_isa_device_probe; driver->driver.remove = i2c_isa_device_remove; -- cgit v1.2.3 From 7ab83a9137ccd3e092fb6ad0cb105b4d1fb617ae Mon Sep 17 00:00:00 2001 From: "Mark M. Hoffman" Date: Mon, 17 Oct 2005 23:01:45 +0200 Subject: [PATCH] hwmon: New device ID for the smsc47b397 driver This patch adds a new ID to the SMSC LPC47B397-NC hardware monitoring driver - for a chip that is claimed to be 100% compatible otherwise. Signed-off-by: Bryan Young (Utilitek Systems, Inc.) Signed-off-by: Mark M. Hoffman Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/smsc47b397 | 8 ++++++-- drivers/hwmon/smsc47b397.c | 7 ++++--- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397 index da9d80c96432..20682f15ae41 100644 --- a/Documentation/hwmon/smsc47b397 +++ b/Documentation/hwmon/smsc47b397 @@ -3,6 +3,7 @@ Kernel driver smsc47b397 Supported chips: * SMSC LPC47B397-NC + * SMSC SCH5307-NS Prefix: 'smsc47b397' Addresses scanned: none, address read from Super I/O config space Datasheet: In this file @@ -12,11 +13,14 @@ Authors: Mark M. Hoffman November 23, 2004 -The following specification describes the SMSC LPC47B397-NC sensor chip +The following specification describes the SMSC LPC47B397-NC[1] sensor chip (for which there is no public datasheet available). This document was provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected by Mark M. Hoffman . +[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise +compatible. + * * * * * Methods for detecting the HP SIO and reading the thermal data on a dc7100. @@ -127,7 +131,7 @@ OUT DX,AL The registers of interest for identifying the SIO on the dc7100 are Device ID (0x20) and Device Rev (0x21). -The Device ID will read 0X6F +The Device ID will read 0x6F (for SCH5307-NS, 0x81) The Device Rev currently reads 0x01 Obtaining the HWM Base Address. diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 7fe71576dea4..37ed8b33f01a 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -299,7 +299,7 @@ static int __init smsc47b397_find(unsigned short *addr) superio_enter(); id = superio_inb(SUPERIO_REG_DEVID); - if (id != 0x6f) { + if ((id != 0x6f) && (id != 0x81)) { superio_exit(); return -ENODEV; } @@ -310,8 +310,9 @@ static int __init smsc47b397_find(unsigned short *addr) *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) | superio_inb(SUPERIO_REG_BASE_LSB); - printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC " - "(base address 0x%04x, revision %u)\n", *addr, rev); + printk(KERN_INFO "smsc47b397: found SMSC %s " + "(base address 0x%04x, revision %u)\n", + id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev); superio_exit(); return 0; -- cgit v1.2.3 From ddec748f328af6b67e4d0ce0248a8e9f36751827 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:02:42 +0200 Subject: [PATCH] hwmon: Missing class check in two hwmon drivers The atxp1 and ds1621 drivers should make sure they do not probe non-hwmon i2c adapters. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/atxp1.c | 2 ++ drivers/hwmon/ds1621.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index deb4d34c9539..441324fc6b8b 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -253,6 +253,8 @@ static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); static int atxp1_attach_adapter(struct i2c_adapter *adapter) { + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; return i2c_probe(adapter, &addr_data, &atxp1_detect); }; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index b0199e063d0e..e1ff22cf984a 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -180,6 +180,8 @@ static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); static int ds1621_attach_adapter(struct i2c_adapter *adapter) { + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; return i2c_probe(adapter, &addr_data, ds1621_detect); } -- cgit v1.2.3 From 4d4e5ce8648561b964699afb2df5e7268a84599b Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Mon, 17 Oct 2005 23:04:42 +0200 Subject: [PATCH] i2c: New Xicor X1205 RTC driver New driver for the Xicor X1205 RTC chip. Signed-off-by: Alessandro Zummo Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/chips/x1205 | 38 +++ drivers/i2c/chips/Kconfig | 9 + drivers/i2c/chips/Makefile | 1 + drivers/i2c/chips/x1205.c | 698 ++++++++++++++++++++++++++++++++++++++++++ include/linux/x1205.h | 31 ++ 5 files changed, 777 insertions(+) create mode 100644 Documentation/i2c/chips/x1205 create mode 100644 drivers/i2c/chips/x1205.c create mode 100644 include/linux/x1205.h (limited to 'drivers') diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205 new file mode 100644 index 000000000000..09407c991fe5 --- /dev/null +++ b/Documentation/i2c/chips/x1205 @@ -0,0 +1,38 @@ +Kernel driver x1205 +=================== + +Supported chips: + * Xicor X1205 RTC + Prefix: 'x1205' + Addresses scanned: none + Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html + +Authors: + Karen Spearel , + Alessandro Zummo + +Description +----------- + +This module aims to provide complete access to the Xicor X1205 RTC. +Recently Xicor has merged with Intersil, but the chip is +still sold under the Xicor brand. + +This chip is located at address 0x6f and uses a 2-byte register addressing. +Two bytes need to be written to read a single register, while most +other chips just require one and take the second one as the data +to be written. To prevent corrupting unknown chips, the user must +explicitely set the probe parameter. + +example: + +modprobe x1205 probe=0,0x6f + +The module supports one more option, hctosys, which is used to set the +software clock from the x1205. On systems where the x1205 is the +only hardware rtc, this parameter could be used to achieve a correct +date/time earlier in the system boot sequence. + +example: + +modprobe x1205 probe=0,0x6f hctosys=1 diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 6bd44a44cd28..f9fae28f5612 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -126,4 +126,13 @@ config SENSORS_MAX6875 This driver can also be built as a module. If so, the module will be called max6875. +config RTC_X1205_I2C + tristate "Xicor X1205 RTC chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Xicor X1205 RTC chip. + + This driver can also be built as a module. If so, the module + will be called x1205. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index a876dd42b860..46178b57b1f1 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o +obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c new file mode 100644 index 000000000000..7da366cdc18c --- /dev/null +++ b/drivers/i2c/chips/x1205.c @@ -0,0 +1,698 @@ +/* + * x1205.c - An i2c driver for the Xicor X1205 RTC + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * please send all reports to: + * kas11 at tampabay dot rr dot com + * a dot zummo at towertech dot it + * + * based on the other drivers in this same directory. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRV_VERSION "0.9.9" + +/* Addresses to scan: none. This chip is located at + * 0x6f and uses a two bytes register addressing. + * Two bytes need to be written to read a single register, + * while most other chips just require one and take the second + * one as the data to be written. To prevent corrupting + * unknown chips, the user must explicitely set the probe parameter. + */ + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD; +I2C_CLIENT_MODULE_PARM(hctosys, + "Set the system time from the hardware clock upon initialization"); + +/* offsets into CCR area */ + +#define CCR_SEC 0 +#define CCR_MIN 1 +#define CCR_HOUR 2 +#define CCR_MDAY 3 +#define CCR_MONTH 4 +#define CCR_YEAR 5 +#define CCR_WDAY 6 +#define CCR_Y2K 7 + +#define X1205_REG_SR 0x3F /* status register */ +#define X1205_REG_Y2K 0x37 +#define X1205_REG_DW 0x36 +#define X1205_REG_YR 0x35 +#define X1205_REG_MO 0x34 +#define X1205_REG_DT 0x33 +#define X1205_REG_HR 0x32 +#define X1205_REG_MN 0x31 +#define X1205_REG_SC 0x30 +#define X1205_REG_DTR 0x13 +#define X1205_REG_ATR 0x12 +#define X1205_REG_INT 0x11 +#define X1205_REG_0 0x10 +#define X1205_REG_Y2K1 0x0F +#define X1205_REG_DWA1 0x0E +#define X1205_REG_YRA1 0x0D +#define X1205_REG_MOA1 0x0C +#define X1205_REG_DTA1 0x0B +#define X1205_REG_HRA1 0x0A +#define X1205_REG_MNA1 0x09 +#define X1205_REG_SCA1 0x08 +#define X1205_REG_Y2K0 0x07 +#define X1205_REG_DWA0 0x06 +#define X1205_REG_YRA0 0x05 +#define X1205_REG_MOA0 0x04 +#define X1205_REG_DTA0 0x03 +#define X1205_REG_HRA0 0x02 +#define X1205_REG_MNA0 0x01 +#define X1205_REG_SCA0 0x00 + +#define X1205_CCR_BASE 0x30 /* Base address of CCR */ +#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ + +#define X1205_SR_RTCF 0x01 /* Clock failure */ +#define X1205_SR_WEL 0x02 /* Write Enable Latch */ +#define X1205_SR_RWEL 0x04 /* Register Write Enable */ + +#define X1205_DTR_DTR0 0x01 +#define X1205_DTR_DTR1 0x02 +#define X1205_DTR_DTR2 0x04 + +#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ + +/* Prototypes */ +static int x1205_attach(struct i2c_adapter *adapter); +static int x1205_detach(struct i2c_client *client); +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); +static int x1205_command(struct i2c_client *client, unsigned int cmd, + void *arg); + +static struct i2c_driver x1205_driver = { + .owner = THIS_MODULE, + .name = "x1205", + .flags = I2C_DF_NOTIFY, + .attach_adapter = &x1205_attach, + .detach_client = &x1205_detach, +}; + +struct x1205_data { + struct i2c_client client; + struct list_head list; + unsigned int epoch; +}; + +static const unsigned char days_in_mo[] = + { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + +static LIST_HEAD(x1205_clients); + +/* Workaround until the I2C subsytem will allow to send + * commands to a specific client. This function will send the command + * to the first client. + */ +int x1205_do_command(unsigned int cmd, void *arg) +{ + struct list_head *walk; + struct list_head *tmp; + struct x1205_data *data; + + list_for_each_safe(walk, tmp, &x1205_clients) { + data = list_entry(walk, struct x1205_data, list); + return x1205_command(&data->client, cmd, arg); + } + + return -ENODEV; +} + +#define is_leap(year) \ + ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) + +/* make sure the rtc_time values are in bounds */ +static int x1205_validate_tm(struct rtc_time *tm) +{ + int year = tm->tm_year + 1900; + + if ((tm->tm_year < 70) || (tm->tm_year > 255)) + return -EINVAL; + + if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) + return -EINVAL; + + if (tm->tm_mday > days_in_mo[tm->tm_mon] + + ((tm->tm_mon == 1) && is_leap(year))) + return -EINVAL; + + if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) + return -EINVAL; + + return 0; +} + +/* + * In the routines that deal directly with the x1205 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch + * Epoch is initialized as 2000. Time is set to UTC. + */ +static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, + u8 reg_base) +{ + unsigned char dt_addr[2] = { 0, reg_base }; + static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; + + unsigned char buf[8], sr; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, sr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &sr }, /* read status */ + { client->addr, 0, 2, dt_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 8, buf }, /* read date */ + }; + + struct x1205_data *data = i2c_get_clientdata(client); + + /* read status register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + /* check for battery failure */ + if (sr & X1205_SR_RTCF) { + dev_warn(&client->dev, + "Clock had a power failure, you must set the date.\n"); + return -EINVAL; + } + + /* read date registers */ + if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, + "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " + "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", + __FUNCTION__, + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); + + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); + tm->tm_min = BCD2BIN(buf[CCR_MIN]); + tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ + tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); + tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); + data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; + tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; + tm->tm_wday = buf[CCR_WDAY]; + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, + int datetoo, u8 reg_base) +{ + int i, err, xfer; + + unsigned char buf[8]; + + static const unsigned char wel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL }; + + static const unsigned char rwel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL | X1205_SR_RWEL }; + + static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; + + struct x1205_data *data = i2c_get_clientdata(client); + + /* check if all values in the tm struct are correct */ + if ((err = x1205_validate_tm(tm)) < 0) + return err; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + buf[CCR_SEC] = BIN2BCD(tm->tm_sec); + buf[CCR_MIN] = BIN2BCD(tm->tm_min); + + /* set hour and 24hr bit */ + buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + + /* should we also set the date? */ + if (datetoo) { + buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + + /* month, 0 - 11 */ + buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); + + /* year, since 1900 */ + buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); + buf[CCR_WDAY] = tm->tm_wday & 0x07; + buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); + } + + /* this sequence is required to unlock the chip */ + xfer = i2c_master_send(client, wel, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + xfer = i2c_master_send(client, rwel, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + /* write register's data */ + for (i = 0; i < (datetoo ? 8 : 3); i++) { + unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + + xfer = i2c_master_send(client, rdata, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: xfer=%d addr=%02x, data=%02x\n", + __FUNCTION__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + }; + + /* disable further writes */ + xfer = i2c_master_send(client, diswe, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + return 0; +} + +static int x1205_get_dtrim(struct i2c_client *client, int *trim) +{ + unsigned char dtr; + static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ + }; + + /* read dtr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); + + *trim = 0; + + if (dtr & X1205_DTR_DTR0) + *trim += 20; + + if (dtr & X1205_DTR_DTR1) + *trim += 10; + + if (dtr & X1205_DTR_DTR2) + *trim = -*trim; + + return 0; +} + +static int x1205_get_atrim(struct i2c_client *client, int *trim) +{ + s8 atr; + static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, atr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ + }; + + /* read atr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); + + /* atr is a two's complement value on 6 bits, + * perform sign extension. The formula is + * Catr = (atr * 0.25pF) + 11.00pF. + */ + if (atr & 0x20) + atr |= 0xC0; + + dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); + + *trim = (atr * 250) + 11000; + + dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); + + return 0; +} + +static int x1205_hctosys(struct i2c_client *client) +{ + int err; + + struct rtc_time tm; + struct timespec tv; + + err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); + + if (err) { + dev_err(&client->dev, + "Unable to set the system clock\n"); + return err; + } + + /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary + * whether it stores the most close value or the value with partial + * seconds truncated. However, it is important that we use it to store + * the truncated value. This is because otherwise it is necessary, + * in an rtc sync function, to read both xtime.tv_sec and + * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read + * of >32bits is not possible. So storing the most close value would + * slow down the sync API. So here we have the truncated value and + * the best guess is to add 0.5s. + */ + + tv.tv_nsec = NSEC_PER_SEC >> 1; + + /* WARNING: this is not the C library 'mktime' call, it is a built in + * inline function from include/linux/time.h. It expects (requires) + * the month to be in the range 1-12 + */ + + tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, + tm.tm_min, tm.tm_sec); + + do_settimeofday(&tv); + + dev_info(&client->dev, + "setting the system clock to %d-%d-%d %d:%d:%d\n", + tm.tm_year + 1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, tm.tm_min, + tm.tm_sec); + + return 0; +} + +struct x1205_limit +{ + unsigned char reg; + unsigned char mask; + unsigned char min; + unsigned char max; +}; + +static int x1205_validate_client(struct i2c_client *client) +{ + int i, xfer; + + /* Probe array. We will read the register at the specified + * address and check if the given bits are zero. + */ + static const unsigned char probe_zero_pattern[] = { + /* register, mask */ + X1205_REG_SR, 0x18, + X1205_REG_DTR, 0xF8, + X1205_REG_ATR, 0xC0, + X1205_REG_INT, 0x18, + X1205_REG_0, 0xFF, + }; + + static const struct x1205_limit probe_limits_pattern[] = { + /* register, mask, min, max */ + { X1205_REG_Y2K, 0xFF, 19, 20 }, + { X1205_REG_DW, 0xFF, 0, 6 }, + { X1205_REG_YR, 0xFF, 0, 99 }, + { X1205_REG_MO, 0xFF, 0, 12 }, + { X1205_REG_DT, 0xFF, 0, 31 }, + { X1205_REG_HR, 0x7F, 0, 23 }, + { X1205_REG_MN, 0xFF, 0, 59 }, + { X1205_REG_SC, 0xFF, 0, 59 }, + { X1205_REG_Y2K1, 0xFF, 19, 20 }, + { X1205_REG_Y2K0, 0xFF, 19, 20 }, + }; + + /* check that registers have bits a 0 where expected */ + for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { + unsigned char buf; + + unsigned char addr[2] = { 0, probe_zero_pattern[i] }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, &buf }, + }; + + xfer = i2c_transfer(client->adapter, msgs, 2); + if (xfer != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + + if ((buf & probe_zero_pattern[i+1]) != 0) { + dev_err(&client->adapter->dev, + "%s: register=%02x, zero pattern=%d, value=%x\n", + __FUNCTION__, addr[1], i, buf); + + return -ENODEV; + } + } + + /* check limits (only registers with bcd values) */ + for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { + unsigned char reg, value; + + unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, ® }, + }; + + xfer = i2c_transfer(client->adapter, msgs, 2); + + if (xfer != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + + value = BCD2BIN(reg & probe_limits_pattern[i].mask); + + if (value > probe_limits_pattern[i].max || + value < probe_limits_pattern[i].min) { + dev_dbg(&client->adapter->dev, + "%s: register=%x, lim pattern=%d, value=%d\n", + __FUNCTION__, addr[1], i, value); + + return -ENODEV; + } + } + + return 0; +} + +static int x1205_attach(struct i2c_adapter *adapter) +{ + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + return i2c_probe(adapter, &addr_data, x1205_probe); +} + +int x1205_direct_attach(int adapter_id, + struct i2c_client_address_data *address_data) +{ + int err; + struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); + + if (adapter) { + err = i2c_probe(adapter, + address_data, x1205_probe); + + i2c_put_adapter(adapter); + + return err; + } + + return -ENODEV; +} + +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct x1205_data *data; + + int err = 0; + + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + err = -ENODEV; + goto exit; + } + + if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + /* Initialize our structures */ + data->epoch = 2000; + + client = &data->client; + client->addr = address; + client->driver = &x1205_driver; + client->adapter = adapter; + + strlcpy(client->name, "x1205", I2C_NAME_SIZE); + + i2c_set_clientdata(client, data); + + /* Verify the chip is really an X1205 */ + if (kind < 0) { + if (x1205_validate_client(client) < 0) { + err = -ENODEV; + goto exit_kfree; + } + } + + /* Inform the i2c layer */ + if ((err = i2c_attach_client(client))) + goto exit_kfree; + + list_add(&data->list, &x1205_clients); + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + /* If requested, set the system time */ + if (hctosys) + x1205_hctosys(client); + + return 0; + +exit_kfree: + kfree(data); + +exit: + return err; +} + +static int x1205_detach(struct i2c_client *client) +{ + int err; + struct x1205_data *data = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __FUNCTION__); + + if ((err = i2c_detach_client(client))) + return err; + + list_del(&data->list); + + kfree(data); + + return 0; +} + +static int x1205_command(struct i2c_client *client, unsigned int cmd, + void *param) +{ + if (param == NULL) + return -EINVAL; + + if (!capable(CAP_SYS_TIME)) + return -EACCES; + + dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); + + switch (cmd) { + case X1205_CMD_GETDATETIME: + return x1205_get_datetime(client, param, X1205_CCR_BASE); + + case X1205_CMD_SETTIME: + return x1205_set_datetime(client, param, 0, + X1205_CCR_BASE); + + case X1205_CMD_SETDATETIME: + return x1205_set_datetime(client, param, 1, + X1205_CCR_BASE); + + case X1205_CMD_GETALARM: + return x1205_get_datetime(client, param, X1205_ALM0_BASE); + + case X1205_CMD_SETALARM: + return x1205_set_datetime(client, param, 1, + X1205_ALM0_BASE); + + case X1205_CMD_GETDTRIM: + return x1205_get_dtrim(client, param); + + case X1205_CMD_GETATRIM: + return x1205_get_atrim(client, param); + + default: + return -EINVAL; + } +} + +static int __init x1205_init(void) +{ + return i2c_add_driver(&x1205_driver); +} + +static void __exit x1205_exit(void) +{ + i2c_del_driver(&x1205_driver); +} + +MODULE_AUTHOR( + "Karen Spearel , " + "Alessandro Zummo "); +MODULE_DESCRIPTION("Xicor X1205 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +EXPORT_SYMBOL_GPL(x1205_do_command); +EXPORT_SYMBOL_GPL(x1205_direct_attach); + +module_init(x1205_init); +module_exit(x1205_exit); diff --git a/include/linux/x1205.h b/include/linux/x1205.h new file mode 100644 index 000000000000..64fd3af894a5 --- /dev/null +++ b/include/linux/x1205.h @@ -0,0 +1,31 @@ +/* + * x1205.h - defines for drivers/i2c/chips/x1205.c + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_X1205_H__ +#define __LINUX_X1205_H__ + +/* commands */ + +#define X1205_CMD_GETDATETIME 0 +#define X1205_CMD_SETTIME 1 +#define X1205_CMD_SETDATETIME 2 +#define X1205_CMD_GETALARM 3 +#define X1205_CMD_SETALARM 4 +#define X1205_CMD_GETDTRIM 5 +#define X1205_CMD_SETDTRIM 6 +#define X1205_CMD_GETATRIM 7 +#define X1205_CMD_SETATRIM 8 + +extern int x1205_do_command(unsigned int cmd, void *arg); +extern int x1205_direct_attach(int adapter_id, + struct i2c_client_address_data *address_data); + +#endif /* __LINUX_X1205_H__ */ -- cgit v1.2.3 From 2286066faf51890e49ad61e2ceab683666cd9108 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 17 Oct 2005 23:07:05 +0200 Subject: [PATCH] i2c: kzalloc conversion, ixp bus drivers Use kzalloc instead of kmalloc+memzero in the ixp2000 and ixp4xx I2C bus drivers. Signed-off-by: Deepak Saxena Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ixp2000.c | 3 +-- drivers/i2c/busses/i2c-ixp4xx.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index c3292dc743f1..42016ee6ef13 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -106,11 +106,10 @@ static int ixp2000_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp2000_i2c_data *drv_data = - kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(*drv_data)); drv_data->gpio_pins = gpio; drv_data->algo_data.data = gpio; diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 3169280c25a6..69303ab65e04 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -107,12 +107,11 @@ static int ixp4xx_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp4xx_i2c_data *drv_data = - kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); if(!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(struct ixp4xx_i2c_data)); drv_data->gpio_pins = gpio; /* -- cgit v1.2.3 From ba9c2e8d15da029ea3051c95e446b2d638ef02e2 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 17 Oct 2005 23:08:32 +0200 Subject: [PATCH] hwmon: kzalloc conversion Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm1021.c | 3 +-- drivers/hwmon/adm1025.c | 3 +-- drivers/hwmon/adm1026.c | 4 +--- drivers/hwmon/adm1031.c | 3 +-- drivers/hwmon/asb100.c | 11 ++++------- drivers/hwmon/atxp1.c | 3 +-- drivers/hwmon/ds1621.c | 3 +-- drivers/hwmon/fscher.c | 3 +-- drivers/hwmon/fscpos.c | 3 +-- drivers/hwmon/gl518sm.c | 3 +-- drivers/hwmon/gl520sm.c | 3 +-- drivers/hwmon/it87.c | 3 +-- drivers/hwmon/lm63.c | 3 +-- drivers/hwmon/lm75.c | 3 +-- drivers/hwmon/lm77.c | 3 +-- drivers/hwmon/lm78.c | 3 +-- drivers/hwmon/lm80.c | 3 +-- drivers/hwmon/lm83.c | 3 +-- drivers/hwmon/lm85.c | 3 +-- drivers/hwmon/lm87.c | 3 +-- drivers/hwmon/lm90.c | 3 +-- drivers/hwmon/lm92.c | 3 +-- drivers/hwmon/max1619.c | 3 +-- drivers/hwmon/pc87360.c | 3 +-- drivers/hwmon/sis5595.c | 3 +-- drivers/hwmon/smsc47b397.c | 3 +-- drivers/hwmon/smsc47m1.c | 3 +-- drivers/hwmon/via686a.c | 3 +-- drivers/hwmon/w83627ehf.c | 3 +-- drivers/hwmon/w83627hf.c | 3 +-- drivers/hwmon/w83781d.c | 10 +++------- drivers/hwmon/w83792d.c | 6 ++---- drivers/hwmon/w83l785ts.c | 4 +--- 33 files changed, 39 insertions(+), 80 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 58aee3a00caa..8102876c7c3f 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -204,11 +204,10 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access adm1021_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { err = -ENOMEM; goto error0; } - memset(data, 0, sizeof(struct adm1021_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 526b7ff179eb..3ec12421694f 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -331,11 +331,10 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm1025_data)); /* The common I2C client data is placed right before the ADM1025-specific data. */ diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 625158110fd4..3b5814183738 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -1470,13 +1470,11 @@ int adm1026_detect(struct i2c_adapter *adapter, int address, client structure, even though we cannot fill it completely yet. But it allows us to access adm1026_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm1026_data)); - new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 58338ed7c8a1..7c545d5eee45 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -740,11 +740,10 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm1031_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 8e34855a6274..52c469722a65 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -629,19 +629,17 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, int i, id, err; struct asb100_data *data = i2c_get_clientdata(new_client); - data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[0])) { err = -ENOMEM; goto ERROR_SC_0; } - memset(data->lm75[0], 0x00, sizeof(struct i2c_client)); - data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[1])) { err = -ENOMEM; goto ERROR_SC_1; } - memset(data->lm75[1], 0x00, sizeof(struct i2c_client)); id = i2c_adapter_id(adapter); @@ -724,12 +722,11 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access asb100_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) { - pr_debug("asb100.o: detect failed, kmalloc failed!\n"); + if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) { + pr_debug("asb100.o: detect failed, kzalloc failed!\n"); err = -ENOMEM; goto ERROR0; } - memset(data, 0, sizeof(struct asb100_data)); new_client = &data->client; init_MUTEX(&data->lock); diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 441324fc6b8b..53324f56404e 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -268,12 +268,11 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct atxp1_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index e1ff22cf984a..c5afa0058308 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -202,11 +202,10 @@ int ds1621_detect(struct i2c_adapter *adapter, int address, /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access ds1621_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct ds1621_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index eef6061d786b..a02e1c34c757 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -303,11 +303,10 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the * client structure, even though we cannot fill it completely yet. * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct fscher_data)); /* The common I2C client data is placed right before the * Hermes-specific data. */ diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 5fc77a5fed07..a378e4f5c93b 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -453,11 +453,10 @@ int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) * But it allows us to access fscpos_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct fscpos_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 256b9323c84b..2f178dbe3d87 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -365,11 +365,10 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access gl518_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct gl518_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 12fd757066fc..c39ba1239426 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -536,11 +536,10 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access gl520_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct gl520_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 55e1c835a046..9a5b8b268397 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -761,11 +761,10 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access it87_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct it87_data)); new_client = &data->client; if (is_isa) diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index be5c7095ecbb..954ec2497249 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -375,11 +375,10 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm63_data)); /* The common I2C client data is placed right before the LM63-specific data. */ diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 9a3ebdf583f4..d70f4c8fc1e6 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -127,11 +127,10 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access lm75_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm75_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 866eab96a6f6..9380fda7dcd1 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -226,11 +226,10 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access lm77_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm77_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index d697a554286f..924462362743 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -540,11 +540,10 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access lm78_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct lm78_data)); new_client = &data->client; if (is_isa) diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index 83af8b3a0cac..b4cd6c661f11 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -407,11 +407,10 @@ int lm80_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access lm80_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm80_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index d74b2c20c719..9a70611a9f69 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -230,11 +230,10 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm83_data)); /* The common I2C client data is placed right after the * LM83-specific data. */ diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index ab214df9624b..d5537a5377f7 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1033,11 +1033,10 @@ int lm85_detect(struct i2c_adapter *adapter, int address, client structure, even though we cannot fill it completely yet. But it allows us to access lm85_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR0; } - memset(data, 0, sizeof(struct lm85_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index dca996de4c33..eeec18177861 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -554,11 +554,10 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm87_data)); /* The common I2C client data is placed right before the LM87-specific data. */ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 14de05fcd431..dad0f1074956 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -370,11 +370,10 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm90_data)); /* The common I2C client data is placed right before the LM90-specific data. */ diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 647b7c7cd575..7a4b3701ed1a 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -300,11 +300,10 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) | I2C_FUNC_SMBUS_WORD_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm92_data)); /* Fill in enough client fields so that we can read from the chip, which is required for identication */ diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 16bf71f3a04d..6a82ffae1bfd 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -197,11 +197,10 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct max1619_data)); /* The common I2C client data is placed right before the MAX1619-specific data. */ diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index cf2a35799c7c..17f745a23d04 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -754,9 +754,8 @@ static int pc87360_detect(struct i2c_adapter *adapter) const char *name = "pc87360"; int use_thermistors = 0; - if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL))) + if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL))) return -ENOMEM; - memset(data, 0x00, sizeof(struct pc87360_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 21aa9a41f62c..9c6cadec1087 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -518,11 +518,10 @@ static int sis5595_detect(struct i2c_adapter *adapter) goto exit_release; } - if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct sis5595_data)); new_client = &data->client; new_client->addr = address; diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 37ed8b33f01a..2a3e21b5b6b4 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -244,11 +244,10 @@ static int smsc47b397_detect(struct i2c_adapter *adapter) return -EBUSY; } - if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { err = -ENOMEM; goto error_release; } - memset(data, 0x00, sizeof(struct smsc47b397_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index c9cc683eba4a..bbe93a0688ec 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -396,11 +396,10 @@ static int smsc47m1_detect(struct i2c_adapter *adapter) return -EBUSY; } - if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { err = -ENOMEM; goto error_release; } - memset(data, 0x00, sizeof(struct smsc47m1_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index c6e64f4abdea..6f696f897176 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -621,11 +621,10 @@ static int via686a_detect(struct i2c_adapter *adapter) return -ENODEV; } - if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct via686a_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 685eeb766809..eee22a57e929 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -681,11 +681,10 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) goto exit; } - if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct w83627ehf_data)); client = &data->client; i2c_set_clientdata(client, data); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 48270819ff99..70ef926c3bd8 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1045,11 +1045,10 @@ static int w83627hf_detect(struct i2c_adapter *adapter) client structure, even though we cannot fill it completely yet. But it allows us to access w83627hf_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct w83627hf_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 26b1fac7c619..9265f32122fa 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -889,12 +889,11 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, const char *client_name = ""; struct w83781d_data *data = i2c_get_clientdata(new_client); - data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[0])) { err = -ENOMEM; goto ERROR_SC_0; } - memset(data->lm75[0], 0x00, sizeof (struct i2c_client)); id = i2c_adapter_id(adapter); @@ -919,13 +918,11 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, } if (kind != w83783s) { - - data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[1])) { err = -ENOMEM; goto ERROR_SC_1; } - memset(data->lm75[1], 0x0, sizeof(struct i2c_client)); if (force_subclients[0] == id && force_subclients[1] == address) { @@ -1064,11 +1061,10 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access w83781d_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct w83781d_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 7bbd1888ce94..4be59dbb78c4 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1086,11 +1086,10 @@ w83792d_create_subclient(struct i2c_adapter *adapter, int err; struct i2c_client *sub_client; - (*sub_cli) = sub_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(sub_client)) { return -ENOMEM; } - memset(sub_client, 0x00, sizeof(struct i2c_client)); sub_client->addr = 0x48 + addr; i2c_set_clientdata(sub_client, NULL); sub_client->adapter = adapter; @@ -1184,11 +1183,10 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access w83792d_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR0; } - memset(data, 0, sizeof(struct w83792d_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index db12a620b331..f495b6378668 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -156,12 +156,10 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct w83l785ts_data)); - /* The common I2C client data is placed right before the * W83L785TS-specific data. */ -- cgit v1.2.3 From 5263ebb51eb098b01caf229498c954999117e4a7 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 17 Oct 2005 23:09:43 +0200 Subject: [PATCH] i2c: kzalloc conversion, other drivers Use kzalloc instead of kmalloc+memset in all remaining i2c bus and chip drivers. Signed-off-by: Deepak Saxena Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-amd8111.c | 3 +-- drivers/i2c/busses/i2c-ibm_iic.c | 3 +-- drivers/i2c/busses/i2c-iop3xx.c | 6 ++---- drivers/i2c/busses/i2c-keywest.c | 3 +-- drivers/i2c/busses/i2c-mpc.c | 3 +-- drivers/i2c/busses/i2c-mv64xxx.c | 5 +---- drivers/i2c/busses/i2c-nforce2.c | 3 +-- drivers/i2c/busses/i2c-parport.c | 5 ++--- drivers/i2c/busses/i2c-pmac-smu.c | 3 +-- drivers/i2c/busses/i2c-prosavage.c | 4 +--- drivers/i2c/busses/scx200_acb.c | 3 +-- drivers/i2c/chips/ds1337.c | 3 +-- drivers/i2c/chips/ds1374.c | 3 +-- drivers/i2c/chips/eeprom.c | 3 +-- drivers/i2c/chips/m41t00.c | 3 +-- drivers/i2c/chips/max6875.c | 6 ++---- drivers/i2c/chips/pca9539.c | 3 +-- drivers/i2c/chips/pcf8574.c | 3 +-- drivers/i2c/chips/pcf8591.c | 3 +-- drivers/i2c/chips/rtc8564.c | 3 +-- drivers/i2c/chips/tps65010.c | 3 +-- drivers/i2c/i2c-dev.c | 3 +-- 22 files changed, 25 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0d29e78dff63..aface7938a5b 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -344,10 +344,9 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) return -ENODEV; - smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL); + smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); if (!smbus) return -ENOMEM; - memset(smbus, 0, sizeof(struct amd_smbus)); smbus->dev = dev; smbus->base = pci_resource_start(dev, 0); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index a3ed9590f028..1a587253d716 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -672,13 +672,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){ printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", ocp->def->index); - if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){ + if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", ocp->def->index); return -ENOMEM; } - memset(dev, 0, sizeof(*dev)); dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 0f7dfd8f4546..9888fae1f37a 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -440,19 +440,17 @@ iop3xx_i2c_probe(struct device *dev) struct i2c_adapter *new_adapter; struct i2c_algo_iop3xx_data *adapter_data; - new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); if (!new_adapter) { ret = -ENOMEM; goto out; } - memset((void*)new_adapter, 0, sizeof(*new_adapter)); - adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); + adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); if (!adapter_data) { ret = -ENOMEM; goto free_adapter; } - memset((void*)adapter_data, 0, sizeof(*adapter_data)); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index 34e43c8d8d5e..ef281e0c567b 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -535,13 +535,12 @@ create_iface(struct device_node *np, struct device *dev) tsize = sizeof(struct keywest_iface) + (sizeof(struct keywest_chan) + 4) * nchan; - iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL); + iface = (struct keywest_iface *) kzalloc(tsize, GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); pmac_low_i2c_unlock(np); return -ENOMEM; } - memset(iface, 0, tsize); spin_lock_init(&iface->lock); init_completion(&iface->complete); iface->node = of_node_get(np); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index b81c54620030..8491633005b8 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -296,10 +296,9 @@ static int fsl_i2c_probe(struct device *device) pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; - if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { + if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) { return -ENOMEM; } - memset(i2c, 0, sizeof(*i2c)); i2c->irq = platform_get_irq(pdev, 0); i2c->flags = pdata->device_flags; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 69709ee0b896..d0d2a6f1386e 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -500,13 +500,10 @@ mv64xxx_i2c_probe(struct device *dev) if ((pd->id != 0) || !pdata) return -ENODEV; - drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); - + drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data)); - if (mv64xxx_i2c_map_regs(pd, drv_data)) { rc = -ENODEV; goto exit_kfree; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 5dc62114cc8d..87b6e26aa8a0 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -313,10 +313,9 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ int res1, res2; /* we support 2 SMBus adapters */ - if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus), + if (!(smbuses = (void *)kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; - memset (smbuses, 0, 2*sizeof(struct nforce2_smbus)); pci_set_drvdata(dev, smbuses); /* SMBus adapter 1 */ diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index fa506187fbe1..2854d858fc9b 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -155,12 +155,11 @@ static void i2c_parport_attach (struct parport *port) { struct i2c_par *adapter; - adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL); + adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); if (adapter == NULL) { - printk(KERN_ERR "i2c-parport: Failed to kmalloc\n"); + printk(KERN_ERR "i2c-parport: Failed to kzalloc\n"); return; } - memset(adapter, 0x00, sizeof(struct i2c_par)); pr_debug("i2c-parport: attaching to %s\n", port->name); adapter->pdev = parport_register_device(port, "i2c-parport", diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c index 8a9f5648a23d..bfefe7f7a53d 100644 --- a/drivers/i2c/busses/i2c-pmac-smu.c +++ b/drivers/i2c/busses/i2c-pmac-smu.c @@ -211,12 +211,11 @@ static int create_iface(struct device_node *np, struct device *dev) } busid = *reg; - iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL); + iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n"); return -ENOMEM; } - memset(iface, 0, sizeof(struct smu_iface)); init_completion(&iface->complete); iface->busid = busid; diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 92b744273577..42f8b5ce3bf8 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -241,14 +241,12 @@ static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_devic struct s_i2c_chip *chip; struct s_i2c_bus *bus; - pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); + pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); chip = (struct s_i2c_chip *)pci_get_drvdata(dev); if (chip == NULL) { return -ENOMEM; } - memset(chip, 0, sizeof(struct s_i2c_chip)); - base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; len = dev->resource[0].end - base + 1; chip->mmio = ioremap_nocache(base, len); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index a1d580e05361..d3478e084522 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -442,14 +442,13 @@ static int __init scx200_acb_create(int base, int index) int rc = 0; char description[64]; - iface = kmalloc(sizeof(*iface), GFP_KERNEL); + iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { printk(KERN_ERR NAME ": can't allocate memory\n"); rc = -ENOMEM; goto errout; } - memset(iface, 0, sizeof(*iface)); adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 9d3175c03395..01b037007410 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -243,11 +243,10 @@ static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind) I2C_FUNC_I2C)) goto exit; - if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct ds1337_data)); INIT_LIST_HEAD(&data->list); /* The common I2C client data is placed right before the diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index ec640e9f085a..1596e6478782 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -193,11 +193,10 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) struct i2c_client *client; int rc; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!client) return -ENOMEM; - memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); client->addr = addr; client->adapter = adap; diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 7fb739c43935..ee7cbc823fd1 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -171,11 +171,10 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) | I2C_FUNC_SMBUS_BYTE)) goto exit; - if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct eeprom_data)); new_client = &data->client; memset(data->data, 0xff, EEPROM_SIZE); diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 554f7ba61627..3df309ae44a6 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -174,11 +174,10 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind) struct i2c_client *client; int rc; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!client) return -ENOMEM; - memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE); client->addr = addr; client->adapter = adap; diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 9e1aeb69abf9..b376a006883c 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -179,16 +179,14 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) if (address & 1) return 0; - if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) + if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) return -ENOMEM; - memset(data, 0, sizeof(struct max6875_data)); /* A fake client is created on the odd address */ - if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) { + if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { err = -ENOMEM; goto exit_kfree1; } - memset(fake_client, 0, sizeof(struct i2c_client)); /* Init real i2c_client */ real_client = &data->client; diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c index 225577fdda4d..59a930346229 100644 --- a/drivers/i2c/chips/pca9539.c +++ b/drivers/i2c/chips/pca9539.c @@ -122,11 +122,10 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pca9539_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 6525743ff9fd..2c2555d46fdf 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -127,11 +127,10 @@ int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pcf8574_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 80f1df9a4500..3c815b153249 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -178,11 +178,10 @@ int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pcf8591_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c index dd9d42d7b6e7..916cdc1af23c 100644 --- a/drivers/i2c/chips/rtc8564.c +++ b/drivers/i2c/chips/rtc8564.c @@ -148,12 +148,11 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) {addr, I2C_M_RD, 2, data} }; - d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL); + d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL); if (!d) { ret = -ENOMEM; goto done; } - memset(d, 0, sizeof(struct rtc8564_data)); new_client = &d->client; strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 280e9638c0f8..280dd7a45db6 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -500,11 +500,10 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) return 0; } - tps = kmalloc(sizeof *tps, GFP_KERNEL); + tps = kzalloc(sizeof *tps, GFP_KERNEL); if (!tps) return 0; - memset(tps, 0, sizeof *tps); init_MUTEX(&tps->lock); INIT_WORK(&tps->work, tps65010_work, tps); tps->irq = -1; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 89f54a5e8484..276ec42a0717 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -80,10 +80,9 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap) { struct i2c_dev *i2c_dev; - i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL); + i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL); if (!i2c_dev) return ERR_PTR(-ENOMEM); - memset(i2c_dev, 0x00, sizeof(*i2c_dev)); spin_lock(&i2c_dev_array_lock); if (i2c_dev_array[adap->nr]) { -- cgit v1.2.3 From 078d9fe4fe8dada13e37d2e2790b0ad780324097 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:12:36 +0200 Subject: [PATCH] i2c: kzalloc cleanups, 1 of 2 Drop useless casts on kzalloc returned values, as suggested by Jiri Slaby. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-keywest.c | 2 +- drivers/i2c/busses/i2c-nforce2.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index ef281e0c567b..d61f748278fc 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -535,7 +535,7 @@ create_iface(struct device_node *np, struct device *dev) tsize = sizeof(struct keywest_iface) + (sizeof(struct keywest_chan) + 4) * nchan; - iface = (struct keywest_iface *) kzalloc(tsize, GFP_KERNEL); + iface = kzalloc(tsize, GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); pmac_low_i2c_unlock(np); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 87b6e26aa8a0..9b4247610815 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -313,8 +313,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ int res1, res2; /* we support 2 SMBus adapters */ - if (!(smbuses = (void *)kzalloc(2*sizeof(struct nforce2_smbus), - GFP_KERNEL))) + if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; pci_set_drvdata(dev, smbuses); -- cgit v1.2.3 From deb875c7ff2ef417a2daff41ee4b357098b7ab10 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:14:31 +0200 Subject: [PATCH] i2c: kzalloc cleanups, 2 of 2 Use kzalloc instead of kmalloc in the S4882 SMBus multiplexing driver. I guess it's safer that way. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-amd756-s4882.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 4e553e8c5cba..f51ab652300a 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -169,12 +169,12 @@ static int __init amd756_s4882_init(void) init_MUTEX(&amd756_lock); /* Define the 5 virtual adapters and algorithms structures */ - if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter), + if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL))) { error = -ENOMEM; goto ERROR1; } - if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm), + if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL))) { error = -ENOMEM; goto ERROR2; -- cgit v1.2.3 From 6536c49a1ee2bd85eee0e7fa41e67c5743f2f93e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:04:12 +0200 Subject: [PATCH] i2c: Static function fixes, 1 of 4 eeprom_detect is first declared static and then when the function is actually implemented, there is no static. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index ee7cbc823fd1..4baf573fa04f 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -155,7 +155,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) +static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct eeprom_data *data; -- cgit v1.2.3 From d8d2061590c87c20bf78133461bc74df78803ecb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:05:46 +0200 Subject: [PATCH] hwmon: Static function fixes, 2 of 4 lm78.c and lm85.c have a number of items declared static then implemented without the static on them. The following patch fixes these sparse errors. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/lm78.c | 2 +- drivers/hwmon/lm85.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 924462362743..bde0cda9477e 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -480,7 +480,7 @@ static int lm78_isa_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int lm78_detect(struct i2c_adapter *adapter, int address, int kind) +static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) { int i, err; struct i2c_client *new_client; diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index d5537a5377f7..d1070ed2bee6 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1007,14 +1007,14 @@ temp_auto(1); temp_auto(2); temp_auto(3); -int lm85_attach_adapter(struct i2c_adapter *adapter) +static int lm85_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; return i2c_probe(adapter, &addr_data, lm85_detect); } -int lm85_detect(struct i2c_adapter *adapter, int address, +static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { int company, verstep ; @@ -1235,7 +1235,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address, return err; } -int lm85_detach_client(struct i2c_client *client) +static int lm85_detach_client(struct i2c_client *client) { struct lm85_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); @@ -1245,7 +1245,7 @@ int lm85_detach_client(struct i2c_client *client) } -int lm85_read_value(struct i2c_client *client, u8 reg) +static int lm85_read_value(struct i2c_client *client, u8 reg) { int res; @@ -1275,7 +1275,7 @@ int lm85_read_value(struct i2c_client *client, u8 reg) return res ; } -int lm85_write_value(struct i2c_client *client, u8 reg, int value) +static int lm85_write_value(struct i2c_client *client, u8 reg, int value) { int res ; @@ -1304,7 +1304,7 @@ int lm85_write_value(struct i2c_client *client, u8 reg, int value) return res ; } -void lm85_init_client(struct i2c_client *client) +static void lm85_init_client(struct i2c_client *client) { int value; struct lm85_data *data = i2c_get_clientdata(client); -- cgit v1.2.3 From c49efceffa599299ab3f38b1cdf8c2f1bf9811c4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:07:25 +0200 Subject: [PATCH] hwmon: Static function fixes, 3 of 4 Fixup functions that have been declared static and then actually defined without the static on. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm1026.c | 18 +++++++++--------- drivers/hwmon/ds1621.c | 4 ++-- drivers/hwmon/fscpos.c | 2 +- drivers/hwmon/it87.c | 2 +- drivers/hwmon/lm80.c | 2 +- 5 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 3b5814183738..e0f56549d1d8 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -315,7 +315,7 @@ static struct i2c_driver adm1026_driver = { .detach_client = adm1026_detach_client, }; -int adm1026_attach_adapter(struct i2c_adapter *adapter) +static int adm1026_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) { return 0; @@ -323,7 +323,7 @@ int adm1026_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, adm1026_detect); } -int adm1026_detach_client(struct i2c_client *client) +static int adm1026_detach_client(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); @@ -332,7 +332,7 @@ int adm1026_detach_client(struct i2c_client *client) return 0; } -int adm1026_read_value(struct i2c_client *client, u8 reg) +static int adm1026_read_value(struct i2c_client *client, u8 reg) { int res; @@ -346,7 +346,7 @@ int adm1026_read_value(struct i2c_client *client, u8 reg) return res; } -int adm1026_write_value(struct i2c_client *client, u8 reg, int value) +static int adm1026_write_value(struct i2c_client *client, u8 reg, int value) { int res; @@ -360,7 +360,7 @@ int adm1026_write_value(struct i2c_client *client, u8 reg, int value) return res; } -void adm1026_init_client(struct i2c_client *client) +static void adm1026_init_client(struct i2c_client *client) { int value, i; struct adm1026_data *data = i2c_get_clientdata(client); @@ -460,7 +460,7 @@ void adm1026_init_client(struct i2c_client *client) } } -void adm1026_print_gpio(struct i2c_client *client) +static void adm1026_print_gpio(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); int i; @@ -492,7 +492,7 @@ void adm1026_print_gpio(struct i2c_client *client) } } -void adm1026_fixup_gpio(struct i2c_client *client) +static void adm1026_fixup_gpio(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); int i; @@ -1452,8 +1452,8 @@ static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); -int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind) +static int adm1026_detect(struct i2c_adapter *adapter, int address, + int kind) { int company, verstep; struct i2c_client *new_client; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index c5afa0058308..34f71b7c7f37 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -186,8 +186,8 @@ static int ds1621_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind) +static int ds1621_detect(struct i2c_adapter *adapter, int address, + int kind) { int conf, temp; struct i2c_client *new_client; diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index a378e4f5c93b..64e4edc64f8d 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -438,7 +438,7 @@ static int fscpos_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, fscpos_detect); } -int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) +static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct fscpos_data *data; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 9a5b8b268397..6c41e25e670b 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -738,7 +738,7 @@ exit: } /* This function is called by i2c_probe */ -int it87_detect(struct i2c_adapter *adapter, int address, int kind) +static int it87_detect(struct i2c_adapter *adapter, int address, int kind) { int i; struct i2c_client *new_client; diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index b4cd6c661f11..c359fdea211e 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -393,7 +393,7 @@ static int lm80_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm80_detect); } -int lm80_detect(struct i2c_adapter *adapter, int address, int kind) +static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) { int i, cur; struct i2c_client *new_client; -- cgit v1.2.3 From 6344a8ece0bacccf61817450e8ccf78c973fc0c5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:09:41 +0200 Subject: [PATCH] i2c: Static function fixes, 4 of 4 Fix functions declared static and then implemented without the static in drivers/i2c/chips. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/ds1374.c | 3 ++- drivers/i2c/chips/pcf8574.c | 2 +- drivers/i2c/chips/pcf8591.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index 1596e6478782..da488b735abf 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -167,7 +167,8 @@ static void ds1374_set_tlet(ulong arg) static ulong new_time; -DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time); +static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, + (ulong) & new_time); int ds1374_set_rtc_time(ulong nowtime) { diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 2c2555d46fdf..c323c2de236c 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -115,7 +115,7 @@ static int pcf8574_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct pcf8574_data *data; diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 3c815b153249..ce420a67560b 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -166,7 +166,7 @@ static int pcf8591_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct pcf8591_data *data; -- cgit v1.2.3 From cd19cc4732395eb3dbaf49042233b5ac69b1fbd3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:14:16 +0200 Subject: [PATCH] i2c: ID redefinition cleanups Fix several redefinitions of i2c IDs. i2c IDs must not be defined outside of i2c-id.h. Signed-off-by: Jean Delvare Signed-off-by: Henk Vergonet Acked-by: Mark McClelland Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-prosavage.c | 5 ----- include/media/ovcamchip.h | 14 -------------- 2 files changed, 19 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 42f8b5ce3bf8..42cb1d8ca659 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -83,11 +83,6 @@ struct s_i2c_chip { /* * i2c configuration */ -#ifndef I2C_HW_B_S3VIA -#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ -#endif - -/* delays */ #define CYCLE_DELAY 10 #define TIMEOUT (HZ / 2) diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h index cb7c0aa96f22..8138983adced 100644 --- a/include/media/ovcamchip.h +++ b/include/media/ovcamchip.h @@ -17,20 +17,6 @@ #include #include -/* Remove these once they are officially defined */ -#ifndef I2C_DRIVERID_OVCAMCHIP - #define I2C_DRIVERID_OVCAMCHIP 0xf00f -#endif -#ifndef I2C_HW_SMBUS_OV511 - #define I2C_HW_SMBUS_OV511 0xfe -#endif -#ifndef I2C_HW_SMBUS_OV518 - #define I2C_HW_SMBUS_OV518 0xff -#endif -#ifndef I2C_HW_SMBUS_OVFX2 - #define I2C_HW_SMBUS_OVFX2 0xfd -#endif - /* --------------------------------- */ /* ENUMERATIONS */ /* --------------------------------- */ -- cgit v1.2.3 From 142078f6f09986c2b8f5ebe215ce405438080317 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:21:50 +0200 Subject: [PATCH] i2c: i2c-i810 documentation update Update the documented list of devices supported by the i2c-i810 driver. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/busses/i2c-i810 | 1 + drivers/i2c/busses/Kconfig | 3 ++- drivers/i2c/busses/i2c-i810.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 index 0544eb332887..83c3b9743c3c 100644 --- a/Documentation/i2c/busses/i2c-i810 +++ b/Documentation/i2c/busses/i2c-i810 @@ -2,6 +2,7 @@ Kernel driver i2c-i810 Supported adapters: * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH) + * Intel 82845G (GMCH) Authors: Frodo Looijaard , diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3badfec75b1c..4010fe92e72b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -135,11 +135,12 @@ config I2C_I810 help If you say yes to this option, support will be included for the Intel 810/815 family of mainboard I2C interfaces. Specifically, the - following versions of the chipset is supported: + following versions of the chipset are supported: i810AA i810AB i810E i815 + i845G This driver can also be built as a module. If so, the module will be called i2c-i810. diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 1b3393b7c461..52bc30593bd7 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -32,6 +32,7 @@ i810AB 7123 i810E 7125 i815 1132 + i845G 2562 */ #include -- cgit v1.2.3 From b8095544bc27044a7aa79e1e073b781a249910c3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:25:04 +0200 Subject: [PATCH] i2c: SMBus PEC support rewrite, 1 of 3 Discard I2C_FUNC_SMBUS_*_PEC defines. i2c clients are not supposed to check for PEC support of i2c bus drivers on individual SMBus transactions, and i2c bus drivers are not supposed to advertise them. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-i801.c | 3 +-- include/linux/i2c.h | 18 ------------------ 2 files changed, 1 insertion(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index e90b6c4e7da3..b05e045f770c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -513,8 +513,7 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK - | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | - I2C_FUNC_SMBUS_HWPEC_CALC : 0); + | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0); } static struct i2c_algorithm smbus_algorithm = { diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 64c13c042f9d..bcd4bb1b450c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -389,10 +389,6 @@ struct i2c_msg { #define I2C_FUNC_10BIT_ADDR 0x00000002 #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC 0x00000800 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_PROC_CALL_PEC 0x00002000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_QUICK 0x00010000 #define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 @@ -408,8 +404,6 @@ struct i2c_msg { #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC 0x40000000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ I2C_FUNC_SMBUS_WRITE_BYTE) @@ -423,17 +417,6 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) #define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2) -#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC (I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC) -#define I2C_FUNC_SMBUS_WORD_DATA_PEC (I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC) - -#define I2C_FUNC_SMBUS_READ_BYTE_PEC I2C_FUNC_SMBUS_READ_BYTE_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC I2C_FUNC_SMBUS_WRITE_BYTE_DATA -#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC I2C_FUNC_SMBUS_WRITE_WORD_DATA -#define I2C_FUNC_SMBUS_BYTE_PEC I2C_FUNC_SMBUS_BYTE_DATA -#define I2C_FUNC_SMBUS_BYTE_DATA_PEC I2C_FUNC_SMBUS_WORD_DATA #define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ I2C_FUNC_SMBUS_BYTE | \ @@ -441,7 +424,6 @@ struct i2c_msg { I2C_FUNC_SMBUS_WORD_DATA | \ I2C_FUNC_SMBUS_PROC_CALL | \ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \ I2C_FUNC_SMBUS_I2C_BLOCK) /* -- cgit v1.2.3 From 421ef47be20c5454b12ae0ec918d5073a9d2b938 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:28:55 +0200 Subject: [PATCH] i2c: SMBus PEC support rewrite, 2 of 3 This is my rewrite of the SMBus PEC support. The original implementation was known to have bugs (credits go to Hideki Iwamoto for reporting many of them recently), and was incomplete due to a conceptual limitation. The rewrite affects only software PEC. Hardware PEC needs very little code and is mostly untouched. Technically, both implementations differ in that the original one was emulating PEC in software by modifying the contents of an i2c_smbus_data union (changing the transaction to a different type), while the new one works one level lower, on i2c_msg structures (working on message contents). Due to the definition of the i2c_smbus_data union, not all SMBus transactions could be handled (at least not without changing the definition of this union, which would break user-space compatibility), and those which could had to be implemented individually. At the opposite, adding PEC to an i2c_msg structure can be done on any SMBus transaction with common code. Advantages of the new implementation: * It's about twice as small (from ~136 lines before to ~70 now, only counting i2c-core, including blank and comment lines). The memory used by i2c-core is down by ~640 bytes (~3.5%). * Easier to validate, less tricky code. The code being common to all transactions by design, the risk that a bug can stay uncovered is lower. * All SMBus transactions have PEC support in I2C emulation mode (providing the non-PEC transaction is also implemented). Transactions which have no emulation code right now will get PEC support for free when they finally get implemented. * Allows for code simplifications in header files and bus drivers (patch follows). Drawbacks (I guess there had to be at least one): * PEC emulation for non-PEC capable non-I2C SMBus masters was dropped. It was based on SMBus tricks and doesn't quite fit in the new design. I don't think it's really a problem, as the benefit was certainly not worth the additional complexity, but it's only fair that I at least mention it. Lastly, let's note that the new implementation does slightly affect compatibility (both in kernel and user-space), but doesn't actually break it. Some defines will be dropped, but the code can always be changed in a way that will work with both the old and the new implementations. It shouldn't be a problem as there doesn't seem to be many users of SMBus PEC to date anyway. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-core.c | 162 +++++++++++++++---------------------------------- include/linux/i2c.h | 2 +- 2 files changed, 49 insertions(+), 115 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 0040981b6698..02e335a04f09 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -19,7 +19,8 @@ /* With some changes from Kyösti Mälkki . All SMBus-related things are written by Frodo Looijaard - SMBus 2.0 support by Mark Studebaker */ + SMBus 2.0 support by Mark Studebaker and + Jean Delvare */ #include #include @@ -830,101 +831,44 @@ crc8(u16 data) return (u8)(data >> 8); } -/* CRC over count bytes in the first array plus the bytes in the rest - array if it is non-null. rest[0] is the (length of rest) - 1 - and is included. */ -static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest) +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) { int i; for(i = 0; i < count; i++) - crc = crc8((crc ^ first[i]) << 8); - if(rest != NULL) - for(i = 0; i <= rest[0]; i++) - crc = crc8((crc ^ rest[i]) << 8); + crc = crc8((crc ^ p[i]) << 8); return crc; } -static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest) +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) { - return i2c_smbus_partial_pec(0, count, first, rest); + /* The address will be sent first */ + u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); } -/* Returns new "size" (transaction type) - Note that we convert byte to byte_data and byte_data to word_data - rather than invent new xxx_PEC transactions. */ -static int i2c_smbus_add_pec(u16 addr, u8 command, int size, - union i2c_smbus_data *data) +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) { - u8 buf[3]; - - buf[0] = addr << 1; - buf[1] = command; - switch(size) { - case I2C_SMBUS_BYTE: - data->byte = i2c_smbus_pec(2, buf, NULL); - size = I2C_SMBUS_BYTE_DATA; - break; - case I2C_SMBUS_BYTE_DATA: - buf[2] = data->byte; - data->word = buf[2] | - (i2c_smbus_pec(3, buf, NULL) << 8); - size = I2C_SMBUS_WORD_DATA; - break; - case I2C_SMBUS_WORD_DATA: - /* unsupported */ - break; - case I2C_SMBUS_BLOCK_DATA: - data->block[data->block[0] + 1] = - i2c_smbus_pec(2, buf, data->block); - size = I2C_SMBUS_BLOCK_DATA_PEC; - break; - } - return size; + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; } -static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial, - union i2c_smbus_data *data) +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) { - u8 buf[3], rpec, cpec; + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); - buf[1] = command; - switch(size) { - case I2C_SMBUS_BYTE_DATA: - buf[0] = (addr << 1) | 1; - cpec = i2c_smbus_pec(2, buf, NULL); - rpec = data->byte; - break; - case I2C_SMBUS_WORD_DATA: - buf[0] = (addr << 1) | 1; - buf[2] = data->word & 0xff; - cpec = i2c_smbus_pec(3, buf, NULL); - rpec = data->word >> 8; - break; - case I2C_SMBUS_WORD_DATA_PEC: - /* unsupported */ - cpec = rpec = 0; - break; - case I2C_SMBUS_PROC_CALL_PEC: - /* unsupported */ - cpec = rpec = 0; - break; - case I2C_SMBUS_BLOCK_DATA_PEC: - buf[0] = (addr << 1); - buf[2] = (addr << 1) | 1; - cpec = i2c_smbus_pec(3, buf, data->block); - rpec = data->block[data->block[0] + 1]; - break; - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - buf[0] = (addr << 1) | 1; - rpec = i2c_smbus_partial_pec(partial, 1, - buf, data->block); - cpec = data->block[data->block[0] + 1]; - break; - default: - cpec = rpec = 0; - break; - } if (rpec != cpec) { pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n", rpec, cpec); @@ -951,9 +895,8 @@ s32 i2c_smbus_read_byte(struct i2c_client *client) s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value) { - union i2c_smbus_data data; /* only for PEC */ return i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data); + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); } s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) @@ -1043,6 +986,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, { addr, flags | I2C_M_RD, 0, msgbuf1 } }; int i; + u8 partial_pec = 0; msgbuf0[0] = command; switch(size) { @@ -1085,7 +1029,6 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, msgbuf0[2] = (data->word >> 8) & 0xff; break; case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_DATA_PEC: if (read_write == I2C_SMBUS_READ) { dev_err(&adapter->dev, "Block read not supported " "under I2C emulation!\n"); @@ -1098,14 +1041,11 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, data->block[0]); return -1; } - if(size == I2C_SMBUS_BLOCK_DATA_PEC) - (msg[0].len)++; for (i = 1; i < msg[0].len; i++) msgbuf0[i] = data->block[i-1]; } break; case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: dev_dbg(&adapter->dev, "Block process call not supported " "under I2C emulation!\n"); return -1; @@ -1130,9 +1070,30 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, return -1; } + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + if (i2c_transfer(adapter, msg, num) < 0) return -1; + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0) + return -1; + } + if (read_write == I2C_SMBUS_READ) switch(size) { case I2C_SMBUS_BYTE: @@ -1161,28 +1122,8 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, union i2c_smbus_data * data) { s32 res; - int swpec = 0; - u8 partial = 0; flags &= I2C_M_TEN | I2C_CLIENT_PEC; - if((flags & I2C_CLIENT_PEC) && - !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) { - swpec = 1; - if(read_write == I2C_SMBUS_READ && - size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; - else if(size == I2C_SMBUS_PROC_CALL) - size = I2C_SMBUS_PROC_CALL_PEC; - else if(size == I2C_SMBUS_BLOCK_PROC_CALL) { - i2c_smbus_add_pec(addr, command, - I2C_SMBUS_BLOCK_DATA, data); - partial = data->block[data->block[0] + 1]; - size = I2C_SMBUS_BLOCK_PROC_CALL_PEC; - } else if(read_write == I2C_SMBUS_WRITE && - size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - size = i2c_smbus_add_pec(addr, command, size, data); - } if (adapter->algo->smbus_xfer) { down(&adapter->bus_lock); @@ -1193,13 +1134,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write, command,size,data); - if(res >= 0 && swpec && - size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA && - (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC || - size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) { - if(i2c_smbus_check_pec(addr, command, size, partial, data)) - return -1; - } return res; } diff --git a/include/linux/i2c.h b/include/linux/i2c.h index bcd4bb1b450c..78c64f7b3105 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -434,7 +434,7 @@ union i2c_smbus_data { __u8 byte; __u16 word; __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for PEC */ + /* and one more for user-space compatibility */ }; /* smbus_access read or write markers */ -- cgit v1.2.3 From 585b3160f8212e58325bc1c0292c2ec01ac5db84 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:31:15 +0200 Subject: [PATCH] i2c: SMBus PEC support rewrite, 3 of 3 The new SMBus PEC implementation doesn't support PEC emulation on non-PEC non-I2C SMBus masters, so we can drop all related code. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-amd8111.c | 7 ------- drivers/i2c/busses/i2c-i801.c | 13 +++++-------- drivers/i2c/busses/i2c-nforce2.c | 7 ------- include/linux/i2c.h | 4 ---- 4 files changed, 5 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index aface7938a5b..f3b79a68dbec 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -253,13 +253,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl read_write = I2C_SMBUS_READ; break; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -1; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index b05e045f770c..27e7894a9d1c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -102,8 +102,8 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); static int i801_transaction(void); -static int i801_block_transaction(union i2c_smbus_data *data, - char read_write, int command); +static int i801_block_transaction(union i2c_smbus_data *data, char read_write, + int command, int hwpec); static unsigned short i801_smba; static struct pci_driver i801_driver; @@ -249,7 +249,7 @@ static int i801_transaction(void) /* All-inclusive block transaction function */ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, - int command) + int command, int hwpec) { int i, len; int smbcmd; @@ -388,7 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } - if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { + if (hwpec && command == I2C_SMBUS_BLOCK_DATA) { /* wait for INTR bit as advised by Intel */ timeout = 0; do { @@ -456,9 +456,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: - case I2C_SMBUS_BLOCK_DATA_PEC: - if(hwpec && size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); @@ -476,7 +473,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, outb_p(1, SMBAUXCTL); /* enable HW PEC */ } if(block) - ret = i801_block_transaction(data, read_write, size); + ret = i801_block_transaction(data, read_write, size, hwpec); else { outb_p(xact | ENABLE_INT9, SMBHSTCNT); ret = i801_transaction(); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 9b4247610815..fd26036e68a3 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -188,13 +188,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); return -1; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 78c64f7b3105..32977fb1d99a 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -451,10 +451,6 @@ union i2c_smbus_data { #define I2C_SMBUS_BLOCK_DATA 5 #define I2C_SMBUS_I2C_BLOCK_DATA 6 #define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_DATA_PEC 8 /* SMBus 2.0 */ -#define I2C_SMBUS_PROC_CALL_PEC 9 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_PROC_CALL_PEC 10 /* SMBus 2.0 */ -#define I2C_SMBUS_WORD_DATA_PEC 11 /* SMBus 2.0 */ /* ----- commands for the ioctl like i2c_command call: -- cgit v1.2.3 From e8aac4a9b417643dd9739b48473790a09b8b6cbe Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:34:42 +0200 Subject: [PATCH] i2c: i2c-i801 PEC code cleanups The tests leading to the use of hardware PEC in the i2c-i801 driver can be simplified. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-i801.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 27e7894a9d1c..4f63195069da 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -388,7 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } - if (hwpec && command == I2C_SMBUS_BLOCK_DATA) { + if (hwpec) { /* wait for INTR bit as advised by Intel */ timeout = 0; do { @@ -416,12 +416,13 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { - int hwpec = 0; + int hwpec; int block = 0; int ret, xact = 0; - if(isich4) - hwpec = (flags & I2C_CLIENT_PEC) != 0; + hwpec = isich4 && (flags & I2C_CLIENT_PEC) + && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA; switch (size) { case I2C_SMBUS_QUICK: @@ -467,11 +468,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(1, SMBAUXCTL); /* enable HW PEC */ - } + if (hwpec) + outb_p(1, SMBAUXCTL); /* enable hardware PEC */ + if(block) ret = i801_block_transaction(data, read_write, size, hwpec); else { @@ -479,11 +478,8 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, ret = i801_transaction(); } - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(0, SMBAUXCTL); - } + if (hwpec) + outb_p(0, SMBAUXCTL); /* disable hardware PEC */ if(block) return ret; -- cgit v1.2.3 From 8256fe0f40f1cd72f80f2c46fe0ab1638f03a98d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:37:52 +0200 Subject: [PATCH] hwmon: Separate the lm90 register read function Preparatory patch to add PEC support to the lm90 driver. We need a centralized function to read register values, where the PEC code will be later inserted. A positive side effect is that read errors are now handled properly. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/lm90.c | 107 +++++++++++++++++++++++++-------------------------- 1 file changed, 53 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index dad0f1074956..5acc12ae4e36 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -349,6 +349,22 @@ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); * Real code */ +static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) +{ + int err; + + err = i2c_smbus_read_byte_data(client, reg); + + if (err < 0) { + dev_warn(&client->dev, "Register %#02x read failed (%d)\n", + reg, err); + return err; + } + *value = err; + + return 0; +} + static int lm90_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) @@ -402,20 +418,22 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) if (kind < 0) { /* detection and identification */ u8 man_id, chip_id, reg_config1, reg_convrate; - man_id = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CHIP_ID); - reg_config1 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG1); - reg_convrate = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONVRATE); + if (lm90_read_reg(new_client, LM90_REG_R_MAN_ID, + &man_id) < 0 + || lm90_read_reg(new_client, LM90_REG_R_CHIP_ID, + &chip_id) < 0 + || lm90_read_reg(new_client, LM90_REG_R_CONFIG1, + ®_config1) < 0 + || lm90_read_reg(new_client, LM90_REG_R_CONVRATE, + ®_convrate) < 0) + goto exit_free; if (man_id == 0x01) { /* National Semiconductor */ u8 reg_config2; - reg_config2 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG2); + if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2, + ®_config2) < 0) + goto exit_free; if ((reg_config1 & 0x2A) == 0x00 && (reg_config2 & 0xF8) == 0x00 @@ -547,7 +565,10 @@ static void lm90_init_client(struct i2c_client *client) */ i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, 5); /* 2 Hz */ - config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1); + if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) { + dev_warn(&client->dev, "Initialization failed!\n"); + return; + } if (config & 0x40) i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config & 0xBF); /* run */ @@ -575,21 +596,15 @@ static struct lm90_data *lm90_update_device(struct device *dev) down(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - u8 oldh, newh; + u8 oldh, newh, l; dev_dbg(&client->dev, "Updating lm90 data.\n"); - data->temp8[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_TEMP); - data->temp8[1] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_LOW); - data->temp8[2] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_HIGH); - data->temp8[3] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_CRIT); - data->temp8[4] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_CRIT); - data->temp_hyst = i2c_smbus_read_byte_data(client, - LM90_REG_R_TCRIT_HYST); + lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]); + lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]); + lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]); + lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]); + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]); + lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst); /* * There is a trick here. We have to read two registers to @@ -605,36 +620,20 @@ static struct lm90_data *lm90_update_device(struct device *dev) * then we have a valid reading. Else we have to read the low * byte again, and now we believe we have a correct reading. */ - oldh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); - newh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - if (newh != oldh) { - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); -#ifdef DEBUG - oldh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - /* oldh is actually newer */ - if (newh != oldh) - dev_warn(&client->dev, "Remote temperature may be " - "wrong.\n"); -#endif - } - data->temp11[0] |= (newh << 8); - - data->temp11[1] = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWL); - data->temp11[2] = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_HIGHH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_HIGHL); - data->alarms = i2c_smbus_read_byte_data(client, - LM90_REG_R_STATUS); + if (lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &oldh) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &newh) == 0 + && (newh == oldh + || lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0)) + data->temp11[0] = (newh << 8) | l; + + if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &newh) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0) + data->temp11[1] = (newh << 8) | l; + if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0) + data->temp11[2] = (newh << 8) | l; + lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms); data->last_updated = jiffies; data->valid = 1; -- cgit v1.2.3 From c3df5806cdae6fac678c662b527cb974bef4b60c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:39:40 +0200 Subject: [PATCH] hwmon: Add PEC support to the lm90 driver Add PEC support to the lm90 driver. Only the ADM1032 chip supports it, and in a rather tricky way, which is why this patch comes with documentation reinforcements. At least, this demonstrates that the new PEC support logic in i2c-core can properly deal with chips with partial PEC support. As enabling PEC causes a significant performance drop, it can be disabled through a sysfs file (unsurprisingly named "pec"). Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/lm90 | 39 +++++++++++++++++++++++-- Documentation/hwmon/sysfs-interface | 3 ++ drivers/hwmon/lm90.c | 57 ++++++++++++++++++++++++++++++++++++- 3 files changed, 96 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 2c4cf39471f4..70abf93ea376 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -71,8 +71,8 @@ increased resolution of the remote temperature measurement. The different chipsets of the family are not strictly identical, although very similar. This driver doesn't handle any specific feature for now, -but could if there ever was a need for it. For reference, here comes a -non-exhaustive list of specific features: +with the exception of SMBus PEC. For reference, here comes a non-exhaustive +list of specific features: LM90: * Filter and alert configuration register at 0xBF. @@ -91,6 +91,7 @@ ADM1032: * Conversion averaging. * Up to 64 conversions/s. * ALERT is triggered by open remote sensor. + * SMBus PEC support for Write Byte and Receive Byte transactions. ADT7461 * Extended temperature range (breaks compatibility) @@ -119,3 +120,37 @@ The lm90 driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return 'old' values. +PEC Support +----------- + +The ADM1032 is the only chip of the family which supports PEC. It does +not support PEC on all transactions though, so some care must be taken. + +When reading a register value, the PEC byte is computed and sent by the +ADM1032 chip. However, in the case of a combined transaction (SMBus Read +Byte), the ADM1032 computes the CRC value over only the second half of +the message rather than its entirety, because it thinks the first half +of the message belongs to a different transaction. As a result, the CRC +value differs from what the SMBus master expects, and all reads fail. + +For this reason, the lm90 driver will enable PEC for the ADM1032 only if +the bus supports the SMBus Send Byte and Receive Byte transaction types. +These transactions will be used to read register values, instead of +SMBus Read Byte, and PEC will work properly. + +Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC. +Instead, it will try to write the PEC value to the register (because the +SMBus Send Byte transaction with PEC is similar to a Write Byte transaction +without PEC), which is not what we want. Thus, PEC is explicitely disabled +on SMBus Send Byte transactions in the lm90 driver. + +PEC on byte data transactions represents a significant increase in bandwidth +usage (+33% for writes, +25% for reads) in normal conditions. With the need +to use two SMBus transaction for reads, this overhead jumps to +50%. Worse, +two transactions will typically mean twice as much delay waiting for +transaction completion, effectively doubling the register cache refresh time. +I guess reliability comes at a price, but it's quite expensive this time. + +So, as not everyone might enjoy the slowdown, PEC can be disabled through +sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1 +to that file to enable PEC again. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 346400519d0d..764cdc5480e7 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -272,3 +272,6 @@ beep_mask Bitmask for beep. eeprom Raw EEPROM data in binary form. Read only. + +pec Enable or disable PEC (SMBus only) + Read/Write diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 5acc12ae4e36..fa0793e684fd 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -345,15 +345,63 @@ static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +/* pec used for ADM1032 only */ +static ssize_t show_pec(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC)); +} + +static ssize_t set_pec(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + long val = simple_strtol(buf, NULL, 10); + + switch (val) { + case 0: + client->flags &= ~I2C_CLIENT_PEC; + break; + case 1: + client->flags |= I2C_CLIENT_PEC; + break; + default: + return -EINVAL; + } + + return count; +} + +static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec); + /* * Real code */ +/* The ADM1032 supports PEC but not on write byte transactions, so we need + to explicitely ask for a transaction without PEC. */ +static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value) +{ + return i2c_smbus_xfer(client->adapter, client->addr, + client->flags & ~I2C_CLIENT_PEC, + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); +} + +/* It is assumed that client->update_lock is held (unless we are in + detection or initialization steps). This matters when PEC is enabled, + because we don't want the address pointer to change between the write + byte and the read byte transactions. */ static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) { int err; - err = i2c_smbus_read_byte_data(client, reg); + if (client->flags & I2C_CLIENT_PEC) { + err = adm1032_write_byte(client, reg); + if (err >= 0) + err = i2c_smbus_read_byte(client); + } else + err = i2c_smbus_read_byte_data(client, reg); if (err < 0) { dev_warn(&client->dev, "Register %#02x read failed (%d)\n", @@ -494,6 +542,10 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) name = "lm90"; } else if (kind == adm1032) { name = "adm1032"; + /* The ADM1032 supports PEC, but only if combined + transactions are not used. */ + if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + new_client->flags |= I2C_CLIENT_PEC; } else if (kind == lm99) { name = "lm99"; } else if (kind == lm86) { @@ -546,6 +598,9 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) &sensor_dev_attr_temp2_crit_hyst.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); + if (new_client->flags & I2C_CLIENT_PEC) + device_create_file(&new_client->dev, &dev_attr_pec); + return 0; exit_detach: -- cgit v1.2.3 From 90209b42d0498d57a804bf81fea427bf39c5315c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 22:20:21 +0200 Subject: [PATCH] hwmon: lm90 documentation update Update the I2C addresses for the ADM1032 and ADT7461 chips. Also update the links to the Analog Devices web site. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/lm90 | 8 ++++---- drivers/hwmon/lm90.c | 16 +++++++--------- 2 files changed, 11 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 70abf93ea376..438cb24cee5b 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -24,14 +24,14 @@ Supported chips: http://www.national.com/pf/LM/LM86.html * Analog Devices ADM1032 Prefix: 'adm1032' - Addresses scanned: I2C 0x4c + Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the Analog Devices website - http://products.analog.com/products/info.asp?product=ADM1032 + http://www.analog.com/en/prod/0,2877,ADM1032,00.html * Analog Devices ADT7461 Prefix: 'adt7461' - Addresses scanned: I2C 0x4c + Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the Analog Devices website - http://products.analog.com/products/info.asp?product=ADT7461 + http://www.analog.com/en/prod/0,2877,ADT7461,00.html Note: Only if in ADM1032 compatibility mode * Maxim MAX6657 Prefix: 'max6657' diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index fa0793e684fd..83cf2e1b09f5 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -31,7 +31,7 @@ * Devices. That chip is similar to the LM90, with a few differences * that are not handled by this driver. Complete datasheet can be * obtained from Analog's website at: - * http://products.analog.com/products/info.asp?product=ADM1032 + * http://www.analog.com/en/prod/0,2877,ADM1032,00.html * Among others, it has a higher accuracy than the LM90, much like the * LM86 does. * @@ -49,7 +49,7 @@ * register values are decoded differently) it is ignored by this * driver. Complete datasheet can be obtained from Analog's website * at: - * http://products.analog.com/products/info.asp?product=ADT7461 + * http://www.analog.com/en/prod/0,2877,ADT7461,00.html * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -83,10 +83,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659. - * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c. - * LM89-1, and LM99-1 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658 + * have address 0x4c. + * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d. * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). - * ADT7461 always has address 0x4c. */ static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; @@ -500,14 +500,12 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } } else if (man_id == 0x41) { /* Analog Devices */ - if (address == 0x4C - && (chip_id & 0xF0) == 0x40 /* ADM1032 */ + if ((chip_id & 0xF0) == 0x40 /* ADM1032 */ && (reg_config1 & 0x3F) == 0x00 && reg_convrate <= 0x0A) { kind = adm1032; } else - if (address == 0x4c - && chip_id == 0x51 /* ADT7461 */ + if (chip_id == 0x51 /* ADT7461 */ && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ && reg_convrate <= 0x0A) { kind = adt7461; -- cgit v1.2.3 From b890a07f7b002ee473986fa85ae3582de399a4cf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 22:21:24 +0200 Subject: [PATCH] hwmon: smsc47m1 documentation update The SMSC LPC47M997 Super-I/O chip seems to be compatible with the LPC47M192, so it is supported by the smsc47m1 driver. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/smsc47m1 | 7 +++++++ drivers/hwmon/smsc47m1.c | 7 +++++-- 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1 index 34e6478c1425..c15bbe68264e 100644 --- a/Documentation/hwmon/smsc47m1 +++ b/Documentation/hwmon/smsc47m1 @@ -12,6 +12,10 @@ Supported chips: http://www.smsc.com/main/datasheets/47m14x.pdf http://www.smsc.com/main/tools/discontinued/47m15x.pdf http://www.smsc.com/main/datasheets/47m192.pdf + * SMSC LPC47M997 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m1' + Datasheet: none Authors: Mark D. Studebaker , @@ -30,6 +34,9 @@ The 47M15x and 47M192 chips contain a full 'hardware monitoring block' in addition to the fan monitoring and control. The hardware monitoring block is not supported by the driver. +No documentation is available for the 47M997, but it has the same device +ID as the 47M15x and 47M192 chips and seems to be compatible. + Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to give diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index bbe93a0688ec..5905c1af88f2 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -3,7 +3,7 @@ for hardware monitoring Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, - LPC47M15x and LPC47M192 Super-I/O chips. + LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips. Copyright (C) 2002 Mark D. Studebaker Copyright (C) 2004 Jean Delvare @@ -356,6 +356,8 @@ static int __init smsc47m1_find(unsigned short *addr) * 0x5F) and LPC47B27x (device id 0x51) have fan control. * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" * can do much more besides (device id 0x60). + * The LPC47M997 is undocumented, but seems to be compatible with + * the LPC47M192, and has the same device id. */ if (val == 0x51) printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n"); @@ -364,7 +366,8 @@ static int __init smsc47m1_find(unsigned short *addr) else if (val == 0x5F) printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n"); else if (val == 0x60) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n"); + printk(KERN_INFO "smsc47m1: Found SMSC " + "LPC47M15x/LPC47M192/LPC47M997\n"); else { superio_exit(); return -ENODEV; -- cgit v1.2.3 From 0dc9a32d9a975ccd25b9f531451165c93e1c7313 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 22 Oct 2005 00:23:27 +0200 Subject: [PATCH] I2C: remove devfs support from i2c-dev driver as devfs is gone, this isn't needed anymore. Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-dev.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 276ec42a0717..ea14c8f1c82b 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -26,15 +26,11 @@ /* The I2C_RDWR ioctl code is written by Kolja Waschk */ -/* The devfs code is contributed by Philipp Matthias Hahn - */ - #include #include #include #include #include -#include #include #include #include @@ -431,8 +427,6 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) if (IS_ERR(i2c_dev)) return PTR_ERR(i2c_dev); - devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor), - S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor); pr_debug("i2c-dev: adapter [%s] registered as minor %d\n", adap->name, i2c_dev->minor); @@ -465,7 +459,6 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) return -ENODEV; init_completion(&i2c_dev->released); - devfs_remove("i2c/%d", i2c_dev->minor); return_i2c_dev(i2c_dev); class_device_unregister(&i2c_dev->class_dev); wait_for_completion(&i2c_dev->released); @@ -521,8 +514,6 @@ static int __init i2c_dev_init(void) if (res) goto out_unreg_class; - devfs_mk_dir("i2c"); - return 0; out_unreg_class: @@ -538,7 +529,6 @@ static void __exit i2c_dev_exit(void) { i2c_del_driver(&i2cdev_driver); class_unregister(&i2c_dev_class); - devfs_remove("i2c"); unregister_chrdev(I2C_MAJOR,"i2c"); } -- cgit v1.2.3 From c45154a3b1fecdbb51b5462c9f730b44e62b83a5 Mon Sep 17 00:00:00 2001 From: Ed Kear Date: Sat, 16 Jul 2005 23:32:19 -0400 Subject: [PATCH] libata: add support for Promise SATA 300 TX2plus PDC40775 I'm using this card in a RAID1 with 2 new SATA drives with no problems. Card - SATA 300 TX2plus PDC40775 (3d73) Signed-off-by: Ed Kear Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 50495569f409..63911f16b6ec 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -209,6 +209,8 @@ static struct pci_device_id pdc_ata_pci_tbl[] = { board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, -- cgit v1.2.3 From 1993d683f39f77ddb46a662d7146247877d50b8f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 15:30:34 -0700 Subject: [IPoIB] Drop RX packets when out of memory Change the way IPoIB handles RX packets when it can't allocate a new receive skbuff. If the allocation of a new receive skb fails, we now drop the packet we just received and repost the original receive skb. This means that the receive ring always stays full and we don't have to monkey around with trying to schedule a refill task for later. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 21 +++--- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 116 +++++++++++++++++------------- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 +-- 3 files changed, 85 insertions(+), 60 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 6b14bd1c60a0..c994a916a58a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -100,7 +100,12 @@ struct ipoib_pseudoheader { struct ipoib_mcast; -struct ipoib_buf { +struct ipoib_rx_buf { + struct sk_buff *skb; + dma_addr_t mapping; +}; + +struct ipoib_tx_buf { struct sk_buff *skb; DECLARE_PCI_UNMAP_ADDR(mapping) }; @@ -150,14 +155,14 @@ struct ipoib_dev_priv { unsigned int admin_mtu; unsigned int mcast_mtu; - struct ipoib_buf *rx_ring; + struct ipoib_rx_buf *rx_ring; - spinlock_t tx_lock; - struct ipoib_buf *tx_ring; - unsigned tx_head; - unsigned tx_tail; - struct ib_sge tx_sge; - struct ib_send_wr tx_wr; + spinlock_t tx_lock; + struct ipoib_tx_buf *tx_ring; + unsigned tx_head; + unsigned tx_tail; + struct ib_sge tx_sge; + struct ib_send_wr tx_wr; struct ib_wc ibwc[IPOIB_NUM_WC]; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 02d0e0006578..192fef884e21 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -95,57 +95,65 @@ void ipoib_free_ah(struct kref *kref) } } -static inline int ipoib_ib_receive(struct ipoib_dev_priv *priv, - unsigned int wr_id, - dma_addr_t addr) +static int ipoib_ib_post_receive(struct net_device *dev, int id) { - struct ib_sge list = { - .addr = addr, - .length = IPOIB_BUF_SIZE, - .lkey = priv->mr->lkey, - }; - struct ib_recv_wr param = { - .wr_id = wr_id | IPOIB_OP_RECV, - .sg_list = &list, - .num_sge = 1, - }; + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_sge list; + struct ib_recv_wr param; struct ib_recv_wr *bad_wr; + int ret; + + list.addr = priv->rx_ring[id].mapping; + list.length = IPOIB_BUF_SIZE; + list.lkey = priv->mr->lkey; + + param.next = NULL; + param.wr_id = id | IPOIB_OP_RECV; + param.sg_list = &list; + param.num_sge = 1; + + ret = ib_post_recv(priv->qp, ¶m, &bad_wr); + if (unlikely(ret)) { + ipoib_warn(priv, "receive failed for buf %d (%d)\n", id, ret); + dma_unmap_single(priv->ca->dma_device, + priv->rx_ring[id].mapping, + IPOIB_BUF_SIZE, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_ring[id].skb); + priv->rx_ring[id].skb = NULL; + } - return ib_post_recv(priv->qp, ¶m, &bad_wr); + return ret; } -static int ipoib_ib_post_receive(struct net_device *dev, int id) +static int ipoib_alloc_rx_skb(struct net_device *dev, int id) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct sk_buff *skb; dma_addr_t addr; - int ret; skb = dev_alloc_skb(IPOIB_BUF_SIZE + 4); - if (!skb) { - ipoib_warn(priv, "failed to allocate receive buffer\n"); - - priv->rx_ring[id].skb = NULL; + if (!skb) return -ENOMEM; - } - skb_reserve(skb, 4); /* 16 byte align IP header */ - priv->rx_ring[id].skb = skb; + + /* + * IB will leave a 40 byte gap for a GRH and IPoIB adds a 4 byte + * header. So we need 4 more bytes to get to 48 and align the + * IP header to a multiple of 16. + */ + skb_reserve(skb, 4); + addr = dma_map_single(priv->ca->dma_device, skb->data, IPOIB_BUF_SIZE, DMA_FROM_DEVICE); - pci_unmap_addr_set(&priv->rx_ring[id], mapping, addr); - - ret = ipoib_ib_receive(priv, id, addr); - if (ret) { - ipoib_warn(priv, "ipoib_ib_receive failed for buf %d (%d)\n", - id, ret); - dma_unmap_single(priv->ca->dma_device, addr, - IPOIB_BUF_SIZE, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(addr))) { dev_kfree_skb_any(skb); - priv->rx_ring[id].skb = NULL; + return -EIO; } - return ret; + priv->rx_ring[id].skb = skb; + priv->rx_ring[id].mapping = addr; + + return 0; } static int ipoib_ib_post_receives(struct net_device *dev) @@ -154,6 +162,10 @@ static int ipoib_ib_post_receives(struct net_device *dev) int i; for (i = 0; i < IPOIB_RX_RING_SIZE; ++i) { + if (ipoib_alloc_rx_skb(dev, i)) { + ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); + return -ENOMEM; + } if (ipoib_ib_post_receive(dev, i)) { ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i); return -EIO; @@ -176,28 +188,36 @@ static void ipoib_ib_handle_wc(struct net_device *dev, wr_id &= ~IPOIB_OP_RECV; if (wr_id < IPOIB_RX_RING_SIZE) { - struct sk_buff *skb = priv->rx_ring[wr_id].skb; - - priv->rx_ring[wr_id].skb = NULL; + struct sk_buff *skb = priv->rx_ring[wr_id].skb; + dma_addr_t addr = priv->rx_ring[wr_id].mapping; - dma_unmap_single(priv->ca->dma_device, - pci_unmap_addr(&priv->rx_ring[wr_id], - mapping), - IPOIB_BUF_SIZE, - DMA_FROM_DEVICE); - - if (wc->status != IB_WC_SUCCESS) { + if (unlikely(wc->status != IB_WC_SUCCESS)) { if (wc->status != IB_WC_WR_FLUSH_ERR) ipoib_warn(priv, "failed recv event " "(status=%d, wrid=%d vend_err %x)\n", wc->status, wr_id, wc->vendor_err); + dma_unmap_single(priv->ca->dma_device, addr, + IPOIB_BUF_SIZE, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); + priv->rx_ring[wr_id].skb = NULL; return; } + /* + * If we can't allocate a new RX buffer, dump + * this packet and reuse the old buffer. + */ + if (unlikely(ipoib_alloc_rx_skb(dev, wr_id))) { + ++priv->stats.rx_dropped; + goto repost; + } + ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n", wc->byte_len, wc->slid); + dma_unmap_single(priv->ca->dma_device, addr, + IPOIB_BUF_SIZE, DMA_FROM_DEVICE); + skb_put(skb, wc->byte_len); skb_pull(skb, IB_GRH_BYTES); @@ -220,8 +240,8 @@ static void ipoib_ib_handle_wc(struct net_device *dev, dev_kfree_skb_any(skb); } - /* repost receive */ - if (ipoib_ib_post_receive(dev, wr_id)) + repost: + if (unlikely(ipoib_ib_post_receive(dev, wr_id))) ipoib_warn(priv, "ipoib_ib_post_receive failed " "for buf %d\n", wr_id); } else @@ -229,7 +249,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev, wr_id); } else { - struct ipoib_buf *tx_req; + struct ipoib_tx_buf *tx_req; unsigned long flags; if (wr_id >= IPOIB_TX_RING_SIZE) { @@ -302,7 +322,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_ah *address, u32 qpn) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_buf *tx_req; + struct ipoib_tx_buf *tx_req; dma_addr_t addr; if (skb->len > dev->mtu + INFINIBAND_ALEN) { @@ -468,7 +488,7 @@ int ipoib_ib_dev_stop(struct net_device *dev) struct ib_qp_attr qp_attr; int attr_mask; unsigned long begin; - struct ipoib_buf *tx_req; + struct ipoib_tx_buf *tx_req; int i; /* Kill the existing QP and allocate a new one */ diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index ee303859b044..cd4f42328dbe 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -732,7 +732,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) /* Allocate RX/TX "rings" to hold queued skbs */ - priv->rx_ring = kmalloc(IPOIB_RX_RING_SIZE * sizeof (struct ipoib_buf), + priv->rx_ring = kmalloc(IPOIB_RX_RING_SIZE * sizeof (struct ipoib_rx_buf), GFP_KERNEL); if (!priv->rx_ring) { printk(KERN_WARNING "%s: failed to allocate RX ring (%d entries)\n", @@ -740,9 +740,9 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) goto out; } memset(priv->rx_ring, 0, - IPOIB_RX_RING_SIZE * sizeof (struct ipoib_buf)); + IPOIB_RX_RING_SIZE * sizeof (struct ipoib_rx_buf)); - priv->tx_ring = kmalloc(IPOIB_TX_RING_SIZE * sizeof (struct ipoib_buf), + priv->tx_ring = kmalloc(IPOIB_TX_RING_SIZE * sizeof (struct ipoib_tx_buf), GFP_KERNEL); if (!priv->tx_ring) { printk(KERN_WARNING "%s: failed to allocate TX ring (%d entries)\n", @@ -750,7 +750,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) goto out_rx_ring_cleanup; } memset(priv->tx_ring, 0, - IPOIB_TX_RING_SIZE * sizeof (struct ipoib_buf)); + IPOIB_TX_RING_SIZE * sizeof (struct ipoib_tx_buf)); /* priv->tx_head & tx_tail are already 0 */ -- cgit v1.2.3 From 2cea752f683af1be58ee8f25717c0a8118e0ac5b Mon Sep 17 00:00:00 2001 From: "R.Marek@sh.cvut.cz" Date: Tue, 27 Sep 2005 21:54:51 +0000 Subject: [PATCH] PCI: ICH6 ACPI and GPIO quirk This patch just adds ACPI and GPIO regions to its LPC bridge, similar way as ICH4 did. I would like to thank Michal Mleczko for testing. Signed-off-by: Rudolf Marek Signed-off-by: Greg Kroah-Hartman drivers/pci/quirks.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- drivers/pci/quirks.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7992bc8cc6a4..0663428a0e64 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -414,6 +414,18 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi ); +static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev) +{ + u32 region; + + pci_read_config_dword(dev, 0x40, ®ion); + quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO"); + + pci_read_config_dword(dev, 0x48, ®ion); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi ); + /* * VIA ACPI: One IO region pointed to by longword at * 0x48 or 0x20 (256 bytes of ACPI registers) -- cgit v1.2.3 From e04b0ea2e0f9c1bb0d874db4493fc7f7a623116b Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 27 Sep 2005 01:21:55 -0700 Subject: [PATCH] PCI: Block config access during BIST Some PCI adapters (eg. ipr scsi adapters) have an exposure today in that they issue BIST to the adapter to reset the card. If, during the time it takes to complete BIST, userspace attempts to access PCI config space, the host bus bridge will master abort the access since the ipr adapter does not respond on the PCI bus for a brief period of time when running BIST. On PPC64 hardware, this master abort results in the host PCI bridge isolating that PCI device from the rest of the system, making the device unusable until Linux is rebooted. This patch is an attempt to close that exposure by introducing some blocking code in the PCI code. When blocked, writes will be humored and reads will return the cached value. Ben Herrenschmidt has also mentioned that he plans to use this in PPC power management. Signed-off-by: Brian King Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman drivers/pci/access.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci-sysfs.c | 20 +++++----- drivers/pci/pci.h | 7 +++ drivers/pci/proc.c | 28 +++++++-------- drivers/pci/syscall.c | 14 +++---- include/linux/pci.h | 7 +++ 6 files changed, 134 insertions(+), 31 deletions(-) --- drivers/pci/access.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci-sysfs.c | 20 +++++------ drivers/pci/pci.h | 7 ++++ drivers/pci/proc.c | 28 ++++++++-------- drivers/pci/syscall.c | 14 ++++---- include/linux/pci.h | 7 ++++ 6 files changed, 134 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 24a76de49f41..2a42add7f563 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -60,3 +60,92 @@ EXPORT_SYMBOL(pci_bus_read_config_dword); EXPORT_SYMBOL(pci_bus_write_config_byte); EXPORT_SYMBOL(pci_bus_write_config_word); EXPORT_SYMBOL(pci_bus_write_config_dword); + +static u32 pci_user_cached_config(struct pci_dev *dev, int pos) +{ + u32 data; + + data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])]; + data >>= (pos % sizeof(dev->saved_config_space[0])) * 8; + return data; +} + +#define PCI_USER_READ_CONFIG(size,type) \ +int pci_user_read_config_##size \ + (struct pci_dev *dev, int pos, type *val) \ +{ \ + unsigned long flags; \ + int ret = 0; \ + u32 data = -1; \ + if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ + spin_lock_irqsave(&pci_lock, flags); \ + if (likely(!dev->block_ucfg_access)) \ + ret = dev->bus->ops->read(dev->bus, dev->devfn, \ + pos, sizeof(type), &data); \ + else if (pos < sizeof(dev->saved_config_space)) \ + data = pci_user_cached_config(dev, pos); \ + spin_unlock_irqrestore(&pci_lock, flags); \ + *val = (type)data; \ + return ret; \ +} + +#define PCI_USER_WRITE_CONFIG(size,type) \ +int pci_user_write_config_##size \ + (struct pci_dev *dev, int pos, type val) \ +{ \ + unsigned long flags; \ + int ret = -EIO; \ + if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ + spin_lock_irqsave(&pci_lock, flags); \ + if (likely(!dev->block_ucfg_access)) \ + ret = dev->bus->ops->write(dev->bus, dev->devfn, \ + pos, sizeof(type), val); \ + spin_unlock_irqrestore(&pci_lock, flags); \ + return ret; \ +} + +PCI_USER_READ_CONFIG(byte, u8) +PCI_USER_READ_CONFIG(word, u16) +PCI_USER_READ_CONFIG(dword, u32) +PCI_USER_WRITE_CONFIG(byte, u8) +PCI_USER_WRITE_CONFIG(word, u16) +PCI_USER_WRITE_CONFIG(dword, u32) + +/** + * pci_block_user_cfg_access - Block userspace PCI config reads/writes + * @dev: pci device struct + * + * This function blocks any userspace PCI config accesses from occurring. + * When blocked, any writes will be bit bucketed and reads will return the + * data saved using pci_save_state for the first 64 bytes of config + * space and return 0xff for all other config reads. + **/ +void pci_block_user_cfg_access(struct pci_dev *dev) +{ + unsigned long flags; + + pci_save_state(dev); + + /* spinlock to synchronize with anyone reading config space now */ + spin_lock_irqsave(&pci_lock, flags); + dev->block_ucfg_access = 1; + spin_unlock_irqrestore(&pci_lock, flags); +} +EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); + +/** + * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes + * @dev: pci device struct + * + * This function allows userspace PCI config accesses to resume. + **/ +void pci_unblock_user_cfg_access(struct pci_dev *dev) +{ + unsigned long flags; + + /* spinlock to synchronize with anyone reading saved config space */ + spin_lock_irqsave(&pci_lock, flags); + dev->block_ucfg_access = 0; + spin_unlock_irqrestore(&pci_lock, flags); +} +EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 2898830c496f..965a5934623a 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -130,7 +130,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if ((off & 1) && size) { u8 val; - pci_read_config_byte(dev, off, &val); + pci_user_read_config_byte(dev, off, &val); data[off - init_off] = val; off++; size--; @@ -138,7 +138,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if ((off & 3) && size > 2) { u16 val; - pci_read_config_word(dev, off, &val); + pci_user_read_config_word(dev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; off += 2; @@ -147,7 +147,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) while (size > 3) { u32 val; - pci_read_config_dword(dev, off, &val); + pci_user_read_config_dword(dev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; data[off - init_off + 2] = (val >> 16) & 0xff; @@ -158,7 +158,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if (size >= 2) { u16 val; - pci_read_config_word(dev, off, &val); + pci_user_read_config_word(dev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; off += 2; @@ -167,7 +167,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if (size > 0) { u8 val; - pci_read_config_byte(dev, off, &val); + pci_user_read_config_byte(dev, off, &val); data[off - init_off] = val; off++; --size; @@ -192,7 +192,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) } if ((off & 1) && size) { - pci_write_config_byte(dev, off, data[off - init_off]); + pci_user_write_config_byte(dev, off, data[off - init_off]); off++; size--; } @@ -200,7 +200,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if ((off & 3) && size > 2) { u16 val = data[off - init_off]; val |= (u16) data[off - init_off + 1] << 8; - pci_write_config_word(dev, off, val); + pci_user_write_config_word(dev, off, val); off += 2; size -= 2; } @@ -210,7 +210,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) val |= (u32) data[off - init_off + 1] << 8; val |= (u32) data[off - init_off + 2] << 16; val |= (u32) data[off - init_off + 3] << 24; - pci_write_config_dword(dev, off, val); + pci_user_write_config_dword(dev, off, val); off += 4; size -= 4; } @@ -218,13 +218,13 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if (size >= 2) { u16 val = data[off - init_off]; val |= (u16) data[off - init_off + 1] << 8; - pci_write_config_word(dev, off, val); + pci_user_write_config_word(dev, off, val); off += 2; size -= 2; } if (size) { - pci_write_config_byte(dev, off, data[off - init_off]); + pci_user_write_config_byte(dev, off, data[off - init_off]); off++; --size; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index d3f3dd42240d..6527b36c9a61 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -15,6 +15,13 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); +extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); +extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); +extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val); +extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val); +extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val); +extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); + /* PCI /proc functions */ #ifdef CONFIG_PROC_FS extern int pci_proc_attach_device(struct pci_dev *dev); diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 9613f666c110..9eb465727fce 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -80,7 +80,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if ((pos & 1) && cnt) { unsigned char val; - pci_read_config_byte(dev, pos, &val); + pci_user_read_config_byte(dev, pos, &val); __put_user(val, buf); buf++; pos++; @@ -89,7 +89,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if ((pos & 3) && cnt > 2) { unsigned short val; - pci_read_config_word(dev, pos, &val); + pci_user_read_config_word(dev, pos, &val); __put_user(cpu_to_le16(val), (unsigned short __user *) buf); buf += 2; pos += 2; @@ -98,7 +98,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp while (cnt >= 4) { unsigned int val; - pci_read_config_dword(dev, pos, &val); + pci_user_read_config_dword(dev, pos, &val); __put_user(cpu_to_le32(val), (unsigned int __user *) buf); buf += 4; pos += 4; @@ -107,7 +107,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if (cnt >= 2) { unsigned short val; - pci_read_config_word(dev, pos, &val); + pci_user_read_config_word(dev, pos, &val); __put_user(cpu_to_le16(val), (unsigned short __user *) buf); buf += 2; pos += 2; @@ -116,7 +116,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if (cnt) { unsigned char val; - pci_read_config_byte(dev, pos, &val); + pci_user_read_config_byte(dev, pos, &val); __put_user(val, buf); buf++; pos++; @@ -151,7 +151,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if ((pos & 1) && cnt) { unsigned char val; __get_user(val, buf); - pci_write_config_byte(dev, pos, val); + pci_user_write_config_byte(dev, pos, val); buf++; pos++; cnt--; @@ -160,7 +160,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if ((pos & 3) && cnt > 2) { unsigned short val; __get_user(val, (unsigned short __user *) buf); - pci_write_config_word(dev, pos, le16_to_cpu(val)); + pci_user_write_config_word(dev, pos, le16_to_cpu(val)); buf += 2; pos += 2; cnt -= 2; @@ -169,7 +169,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof while (cnt >= 4) { unsigned int val; __get_user(val, (unsigned int __user *) buf); - pci_write_config_dword(dev, pos, le32_to_cpu(val)); + pci_user_write_config_dword(dev, pos, le32_to_cpu(val)); buf += 4; pos += 4; cnt -= 4; @@ -178,7 +178,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if (cnt >= 2) { unsigned short val; __get_user(val, (unsigned short __user *) buf); - pci_write_config_word(dev, pos, le16_to_cpu(val)); + pci_user_write_config_word(dev, pos, le16_to_cpu(val)); buf += 2; pos += 2; cnt -= 2; @@ -187,7 +187,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if (cnt) { unsigned char val; __get_user(val, buf); - pci_write_config_byte(dev, pos, val); + pci_user_write_config_byte(dev, pos, val); buf++; pos++; cnt--; @@ -484,10 +484,10 @@ static int show_dev_config(struct seq_file *m, void *v) drv = pci_dev_driver(dev); - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - pci_read_config_byte (dev, PCI_LATENCY_TIMER, &latency); - pci_read_config_byte (dev, PCI_MIN_GNT, &min_gnt); - pci_read_config_byte (dev, PCI_MAX_LAT, &max_lat); + pci_user_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + pci_user_read_config_byte (dev, PCI_LATENCY_TIMER, &latency); + pci_user_read_config_byte (dev, PCI_MIN_GNT, &min_gnt); + pci_user_read_config_byte (dev, PCI_MAX_LAT, &max_lat); seq_printf(m, " Bus %2d, device %3d, function %2d:\n", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); seq_printf(m, " Class %04x", class_rev >> 16); diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c index c071790cc983..87fafc08cb9d 100644 --- a/drivers/pci/syscall.c +++ b/drivers/pci/syscall.c @@ -13,7 +13,7 @@ #include #include #include - +#include "pci.h" asmlinkage long sys_pciconfig_read(unsigned long bus, unsigned long dfn, @@ -38,13 +38,13 @@ sys_pciconfig_read(unsigned long bus, unsigned long dfn, lock_kernel(); switch (len) { case 1: - cfg_ret = pci_read_config_byte(dev, off, &byte); + cfg_ret = pci_user_read_config_byte(dev, off, &byte); break; case 2: - cfg_ret = pci_read_config_word(dev, off, &word); + cfg_ret = pci_user_read_config_word(dev, off, &word); break; case 4: - cfg_ret = pci_read_config_dword(dev, off, &dword); + cfg_ret = pci_user_read_config_dword(dev, off, &dword); break; default: err = -EINVAL; @@ -112,7 +112,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, err = get_user(byte, (u8 __user *)buf); if (err) break; - err = pci_write_config_byte(dev, off, byte); + err = pci_user_write_config_byte(dev, off, byte); if (err != PCIBIOS_SUCCESSFUL) err = -EIO; break; @@ -121,7 +121,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, err = get_user(word, (u16 __user *)buf); if (err) break; - err = pci_write_config_word(dev, off, word); + err = pci_user_write_config_word(dev, off, word); if (err != PCIBIOS_SUCCESSFUL) err = -EIO; break; @@ -130,7 +130,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, err = get_user(dword, (u32 __user *)buf); if (err) break; - err = pci_write_config_dword(dev, off, dword); + err = pci_user_write_config_dword(dev, off, dword); if (err != PCIBIOS_SUCCESSFUL) err = -EIO; break; diff --git a/include/linux/pci.h b/include/linux/pci.h index 7349058ed778..3596ac94ecff 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -132,6 +132,7 @@ struct pci_dev { unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ u32 saved_config_space[16]; /* config space saved at suspend time */ struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ @@ -490,6 +491,9 @@ extern void pci_disable_msix(struct pci_dev *dev); extern void msi_remove_pci_irq_vectors(struct pci_dev *dev); #endif +extern void pci_block_user_cfg_access(struct pci_dev *dev); +extern void pci_unblock_user_cfg_access(struct pci_dev *dev); + /* * PCI domain support. Sometimes called PCI segment (eg by ACPI), * a PCI domain is defined to be a set of PCI busses which share @@ -560,6 +564,9 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int en #define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0) +static inline void pci_block_user_cfg_access(struct pci_dev *dev) { } +static inline void pci_unblock_user_cfg_access(struct pci_dev *dev) { } + #endif /* CONFIG_PCI */ /* Include architecture-dependent settings and functions */ -- cgit v1.2.3 From b30197d2c07b396907b81673354a015a9d2b216c Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 27 Sep 2005 01:21:56 -0700 Subject: [PATCH] PCI: ipr: Block config access during BIST IPR scsi adapter have an exposure today in that they issue BIST to the adapter to reset the card. If, during the time it takes to complete BIST, userspace attempts to access PCI config space, the host bus bridge will master abort the access since the ipr adapter does not respond on the PCI bus for a brief period of time when running BIST. On PPC64 hardware, this master abort results in the host PCI bridge isolating that PCI device from the rest of the system, making the device unusable until Linux is rebooted. This patch makes use of some newly added PCI layer APIs that allow for protection from userspace accessing config space of a device in scenarios such as this. Signed-off-by: Brian King Cc: Benjamin Herrenschmidt Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman drivers/scsi/ipr.c | 2 ++ 1 file changed, 2 insertions(+) --- drivers/scsi/ipr.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index babd48363402..e0039dfae8e5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4944,6 +4944,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + pci_unblock_user_cfg_access(ioa_cfg->pdev); rc = pci_restore_state(ioa_cfg->pdev); if (rc != PCIBIOS_SUCCESSFUL) { @@ -4998,6 +4999,7 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + pci_block_user_cfg_access(ioa_cfg->pdev); rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START); if (rc != PCIBIOS_SUCCESSFUL) { -- cgit v1.2.3 From d3535fbbce0eef8faa8de30d187fc83b11b858ef Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Sep 2005 17:50:51 -0400 Subject: [PATCH] pci: cleanup need_restore switch statement Cleanup the need_restore switch statement in pci_set_power_state(). This makes it more safe by explicitly handling all the PCI power states instead of handling them as the default case. It also reads a little better IMHO. Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 259d247b7551..39bdb938521d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -314,19 +314,19 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * sets PowerState to 0. */ switch (dev->current_state) { + case PCI_D0: + case PCI_D1: + case PCI_D2: + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= state; + break; case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) need_restore = 1; /* Fall-through: force to D0 */ - case PCI_D3hot: - case PCI_D3cold: - case PCI_POWER_ERROR: - pmcsr = 0; - break; default: - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= state; + pmcsr = 0; break; } -- cgit v1.2.3 From c8920f0c8b3b42537ab4a54ff92c11daf48fdfec Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 28 Sep 2005 15:15:16 -0600 Subject: [PATCH] cpcihp_zt5550: add pci_enable_device() Add pci_{enable,disable}_device() calls. Without pci_enable_device(), dev->irq is garbage, and cpcihp_zt5550 relies on it. Compiled but untested, since I don't have the hardware. Signed-off-by: Bjorn Helgaas Signed-off-by: Scott Murray Signed-off-by: Greg Kroah-Hartman drivers/pci/hotplug/cpcihp_zt5550.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) --- drivers/pci/hotplug/cpcihp_zt5550.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c index e9928024be78..790abadd816c 100644 --- a/drivers/pci/hotplug/cpcihp_zt5550.c +++ b/drivers/pci/hotplug/cpcihp_zt5550.c @@ -78,11 +78,20 @@ static void __iomem *csr_int_mask; static int zt5550_hc_config(struct pci_dev *pdev) { + int ret; + /* Since we know that no boards exist with two HC chips, treat it as an error */ if(hc_dev) { err("too many host controller devices?"); return -EBUSY; } + + ret = pci_enable_device(pdev); + if(ret) { + err("cannot enable %s\n", pci_name(pdev)); + return ret; + } + hc_dev = pdev; dbg("hc_dev = %p", hc_dev); dbg("pci resource start %lx", pci_resource_start(hc_dev, 1)); @@ -91,7 +100,8 @@ static int zt5550_hc_config(struct pci_dev *pdev) if(!request_mem_region(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1), MY_NAME)) { err("cannot reserve MMIO region"); - return -ENOMEM; + ret = -ENOMEM; + goto exit_disable_device; } hc_registers = @@ -99,9 +109,8 @@ static int zt5550_hc_config(struct pci_dev *pdev) if(!hc_registers) { err("cannot remap MMIO region %lx @ %lx", pci_resource_len(hc_dev, 1), pci_resource_start(hc_dev, 1)); - release_mem_region(pci_resource_start(hc_dev, 1), - pci_resource_len(hc_dev, 1)); - return -ENODEV; + ret = -ENODEV; + goto exit_release_region; } csr_hc_index = hc_registers + CSR_HCINDEX; @@ -124,6 +133,13 @@ static int zt5550_hc_config(struct pci_dev *pdev) writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask); dbg("disabled timer0, timer1 and ENUM interrupts"); return 0; + +exit_release_region: + release_mem_region(pci_resource_start(hc_dev, 1), + pci_resource_len(hc_dev, 1)); +exit_disable_device: + pci_disable_device(hc_dev); + return ret; } static int zt5550_hc_cleanup(void) @@ -134,6 +150,7 @@ static int zt5550_hc_cleanup(void) iounmap(hc_registers); release_mem_region(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1)); + pci_disable_device(hc_dev); return 0; } -- cgit v1.2.3 From fe89cf4c4b7a3d9a0ff95eb0506aa7c9baaccda1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 28 Sep 2005 14:03:08 -0600 Subject: [PATCH] cpqphp: add pci_enable_device() Add pci_{enable,disable}_device() calls. Without pci_enable_device(), dev->irq is garbage, and cpqphp relies on it. This fixes a problem reported by Bruno Redondi. He reported a flood of ACPI interrupts, that caused kacpid to run 100% of the time: http://bugzilla.kernel.org/show_bug.cgi?id=5312 Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman drivers/pci/hotplug/cpqphp_core.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) --- drivers/pci/hotplug/cpqphp_core.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 8c6d3987d461..9aed8efe6a11 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -794,12 +794,21 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u32 rc; struct controller *ctrl; struct pci_func *func; + int err; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n", + pci_name(pdev), err); + return err; + } // Need to read VID early b/c it's used to differentiate CPQ and INTC discovery rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) { err(msg_HPC_non_compaq_or_intel); - return -ENODEV; + rc = -ENODEV; + goto err_disable_device; } dbg("Vendor ID: %x\n", vendor_id); @@ -807,7 +816,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dbg("revision: %d\n", rev); if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) { err(msg_HPC_rev_error); - return -ENODEV; + rc = -ENODEV; + goto err_disable_device; } /* Check for the proper subsytem ID's @@ -820,18 +830,20 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid); if (rc) { err("%s : pci_read_config_word failed\n", __FUNCTION__); - return rc; + goto err_disable_device; } dbg("Subsystem Vendor ID: %x\n", subsystem_vid); if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) { err(msg_HPC_non_compaq_or_intel); - return -ENODEV; + rc = -ENODEV; + goto err_disable_device; } ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL); if (!ctrl) { err("%s : out of memory\n", __FUNCTION__); - return -ENOMEM; + rc = -ENOMEM; + goto err_disable_device; } memset(ctrl, 0, sizeof(struct controller)); @@ -1264,6 +1276,8 @@ err_free_bus: kfree(ctrl->pci_bus); err_free_ctrl: kfree(ctrl); +err_disable_device: + pci_disable_device(pdev); return rc; } -- cgit v1.2.3 From acc06632e387fd05d2bf3480f6a2f4d1a62734b8 Mon Sep 17 00:00:00 2001 From: "R.Marek@sh.cvut.cz" Date: Thu, 29 Sep 2005 08:35:41 +0000 Subject: [PATCH] unhide ICH6 SMBus - take 2 This patch unhides hidden SMBus on ICH6 chipset installed in Asus M6V notebook. I would like to thank Michal Mleczko for testing and help. Signed-Off-By: Rudolf Marek Signed-off-by: Greg Kroah-Hartman drivers/pci/quirks.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) --- drivers/pci/quirks.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0663428a0e64..e1bd169cf55c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -934,6 +934,12 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x186a: /* M6Ne notebook */ asus_hides_smbus = 1; } + if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) { + switch (dev->subsystem_device) { + case 0x1882: /* M6V notebook */ + asus_hides_smbus = 1; + } + } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) switch(dev->subsystem_device) { @@ -978,6 +984,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge ); static void __init asus_hides_smbus_lpc(struct pci_dev *dev) { @@ -1002,6 +1009,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, as DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc ); +static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +{ + u32 val, rcba; + void __iomem *base; + + if (likely(!asus_hides_smbus)) + return; + pci_read_config_dword(dev, 0xF0, &rcba); + base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */ + if (base == NULL) return; + val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */ + writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */ + iounmap(base); + printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 ); + /* * SiS 96x south bridge: BIOS typically hides SMBus device... */ -- cgit v1.2.3 From 4153812fc10ea91cb1a7b6ea4f4337dd211c1ef7 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Thu, 29 Sep 2005 10:40:52 +1000 Subject: [PATCH] pci_ids: macros: replace partial with whole symbols pci_ids cleanup: replace symbols built by macros with whole symbols to aid grep searches. Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman drivers/video/cirrusfb.c | 24 ++++++++++++------------ sound/oss/ymfpci.c | 17 +++++++++-------- sound/pci/bt87x.c | 11 +++++++---- 3 files changed, 28 insertions(+), 24 deletions(-) --- drivers/video/cirrusfb.c | 24 ++++++++++++------------ sound/oss/ymfpci.c | 17 +++++++++-------- sound/pci/bt87x.c | 11 +++++++---- 3 files changed, 28 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index a3040429c27b..3a26f9cc8585 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -275,20 +275,20 @@ static const struct cirrusfb_board_info_rec { #ifdef CONFIG_PCI #define CHIP(id, btype) \ - { PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_##id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) } + { PCI_VENDOR_ID_CIRRUS, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) } static struct pci_device_id cirrusfb_pci_table[] = { - CHIP( CIRRUS_5436, BT_ALPINE ), - CHIP( CIRRUS_5434_8, BT_ALPINE ), - CHIP( CIRRUS_5434_4, BT_ALPINE ), - CHIP( CIRRUS_5430, BT_ALPINE ), /* GD-5440 has identical id */ - CHIP( CIRRUS_7543, BT_ALPINE ), - CHIP( CIRRUS_7548, BT_ALPINE ), - CHIP( CIRRUS_5480, BT_GD5480 ), /* MacPicasso probably */ - CHIP( CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is a GD5446 */ - CHIP( CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */ - CHIP( CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */ - CHIP( CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/ + CHIP( PCI_DEVICE_ID_CIRRUS_5436, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5434_8, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5434_4, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5430, BT_ALPINE ), /* GD-5440 is same id */ + CHIP( PCI_DEVICE_ID_CIRRUS_7543, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_7548, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5480, BT_GD5480 ), /* MacPicasso likely */ + CHIP( PCI_DEVICE_ID_CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is 5446 */ + CHIP( PCI_DEVICE_ID_CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */ + CHIP( PCI_DEVICE_ID_CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */ + CHIP( PCI_DEVICE_ID_CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/ { 0, } }; MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table); diff --git a/sound/oss/ymfpci.c b/sound/oss/ymfpci.c index 05203ad523f7..8dae59bd05a2 100644 --- a/sound/oss/ymfpci.c +++ b/sound/oss/ymfpci.c @@ -107,14 +107,15 @@ static LIST_HEAD(ymf_devs); */ static struct pci_device_id ymf_id_tbl[] = { -#define DEV(v, d, data) \ - { PCI_VENDOR_ID_##v, PCI_DEVICE_ID_##v##_##d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long)data } - DEV (YAMAHA, 724, "YMF724"), - DEV (YAMAHA, 724F, "YMF724F"), - DEV (YAMAHA, 740, "YMF740"), - DEV (YAMAHA, 740C, "YMF740C"), - DEV (YAMAHA, 744, "YMF744"), - DEV (YAMAHA, 754, "YMF754"), +#define DEV(dev, data) \ + { PCI_VENDOR_ID_YAMAHA, dev, PCI_ANY_ID, PCI_ANY_ID, 0, 0, \ + (unsigned long)data } + DEV (PCI_DEVICE_ID_YAMAHA_724, "YMF724"), + DEV (PCI_DEVICE_ID_YAMAHA_724F, "YMF724F"), + DEV (PCI_DEVICE_ID_YAMAHA_740, "YMF740"), + DEV (PCI_DEVICE_ID_YAMAHA_740C, "YMF740C"), + DEV (PCI_DEVICE_ID_YAMAHA_744, "YMF744"), + DEV (PCI_DEVICE_ID_YAMAHA_754, "YMF754"), #undef DEV { } }; diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 2236c958aec0..01d98eeb242e 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -761,15 +761,18 @@ static int __devinit snd_bt87x_create(snd_card_t *card, #define BT_DEVICE(chip, subvend, subdev, rate) \ { .vendor = PCI_VENDOR_ID_BROOKTREE, \ - .device = PCI_DEVICE_ID_BROOKTREE_##chip, \ + .device = chip, \ .subvendor = subvend, .subdevice = subdev, \ .driver_data = rate } /* driver_data is the default digital_rate value for that device */ static struct pci_device_id snd_bt87x_ids[] = { - BT_DEVICE(878, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */ - BT_DEVICE(879, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */ - BT_DEVICE(878, 0x0070, 0xff01, 44100), /* Viewcast Osprey 200 */ + /* Hauppauge WinTV series */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000), + /* Hauppauge WinTV series */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, 0x0070, 0x13eb, 32000), + /* Viewcast Osprey 200 */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0xff01, 44100), { } }; MODULE_DEVICE_TABLE(pci, snd_bt87x_ids); -- cgit v1.2.3 From 934199e95d6ac28f42686fe3009877eff33e06c3 Mon Sep 17 00:00:00 2001 From: linas Date: Wed, 28 Sep 2005 19:33:38 -0500 Subject: [PATCH] ppc64 PCI Hotplug: cleanup unsymmetric API routines This is a minor patch to the ppc64 PCI hotplug code; it makes the call to rpaphp_unconfig_pci_adapter() symmetric with respect to the call to rpaphp_config_pci_adapter(). I discussed this with John Rose, who had provided the last round of changes for these functions; he appearently had this patch but somehow failed to mail it out. Tested. (added/removed device). Signed-off-by: Linas Vepstas drivers/pci/hotplug/rpaphp.h | 3 ++- drivers/pci/hotplug/rpaphp_core.c | 5 ++++- drivers/pci/hotplug/rpaphp_pci.c | 11 +++-------- 3 files changed, 9 insertions(+), 10 deletions(-) --- drivers/pci/hotplug/rpaphp.h | 3 ++- drivers/pci/hotplug/rpaphp_core.c | 5 ++++- drivers/pci/hotplug/rpaphp_pci.c | 11 +++-------- 3 files changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h index 61d94d1e29cb..71ea5f9bb284 100644 --- a/drivers/pci/hotplug/rpaphp.h +++ b/drivers/pci/hotplug/rpaphp.h @@ -92,9 +92,10 @@ extern struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn); extern int rpaphp_claim_resource(struct pci_dev *dev, int resource); extern int rpaphp_enable_pci_slot(struct slot *slot); extern int register_pci_slot(struct slot *slot); -extern int rpaphp_unconfig_pci_adapter(struct slot *slot); extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value); + extern int rpaphp_config_pci_adapter(struct pci_bus *bus); +extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus); /* rpaphp_core.c */ extern int rpaphp_add_slot(struct device_node *dn); diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index c830ff0acdc3..cf075c34b578 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -426,8 +426,11 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) dbg("DISABLING SLOT %s\n", slot->name); down(&rpaphp_sem); - retval = rpaphp_unconfig_pci_adapter(slot); + retval = rpaphp_unconfig_pci_adapter(slot->bus); up(&rpaphp_sem); + slot->state = NOT_CONFIGURED; + info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__, + slot->name); exit: dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval); return retval; diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c index 49e4d10a6488..46c157d26a2f 100644 --- a/drivers/pci/hotplug/rpaphp_pci.c +++ b/drivers/pci/hotplug/rpaphp_pci.c @@ -319,20 +319,15 @@ static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev) return; } -int rpaphp_unconfig_pci_adapter(struct slot *slot) +int rpaphp_unconfig_pci_adapter(struct pci_bus *bus) { struct pci_dev *dev, *tmp; - int retval = 0; - list_for_each_entry_safe(dev, tmp, slot->pci_devs, bus_list) { + list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { rpaphp_eeh_remove_bus_device(dev); pci_remove_bus_device(dev); } - - slot->state = NOT_CONFIGURED; - info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__, - slot->name); - return retval; + return 0; } static int setup_pci_hotplug_slot_info(struct slot *slot) -- cgit v1.2.3 From e3b1bd572f1cdb247bb4266a593b6894dc578d6a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 21 Sep 2005 22:26:31 +0200 Subject: [PATCH] PCI: Add quirk for SMBus on HP D530 One more SMBus unhiding quirk, this time for the HP D530. Requested and successfully tested by Ben Cranston. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e1bd169cf55c..ee1605906a3e 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -950,6 +950,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) switch (dev->subsystem_device) { case 0x12bc: /* HP D330L */ + case 0x12bd: /* HP D530 */ asus_hides_smbus = 1; } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) { -- cgit v1.2.3 From dbd7a78818d125a0ebd5507d4edb4dd5900006ab Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:36 -0700 Subject: [PATCH] shpchp: use the PCI core for hotplug resource management This patch converts the standard hotplug controller driver to use the PCI core for resource management. This eliminates a whole lot of duplicated code, and integrates shpchp in the system's normal PCI handling code. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 57 +- drivers/pci/hotplug/shpchp_core.c | 36 +- drivers/pci/hotplug/shpchp_ctrl.c | 1624 +------------------------------- drivers/pci/hotplug/shpchp_pci.c | 482 ++-------- drivers/pci/hotplug/shpchp_sysfs.c | 121 ++- drivers/pci/hotplug/shpchprm.h | 12 - drivers/pci/hotplug/shpchprm_acpi.c | 851 ----------------- drivers/pci/hotplug/shpchprm_legacy.c | 294 ------ drivers/pci/hotplug/shpchprm_legacy.h | 113 --- drivers/pci/hotplug/shpchprm_nonacpi.c | 278 ------ drivers/pci/hotplug/shpchprm_nonacpi.h | 56 -- 11 files changed, 168 insertions(+), 3756 deletions(-) delete mode 100644 drivers/pci/hotplug/shpchprm_legacy.h delete mode 100644 drivers/pci/hotplug/shpchprm_nonacpi.h (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index b7d1c61d6bbb..deea56c73cf2 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -63,14 +63,7 @@ struct pci_func { u8 switch_save; u8 presence_save; u8 pwr_save; - u32 base_length[0x06]; - u8 base_type[0x06]; - u16 reserved2; u32 config_space[0x20]; - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; struct pci_dev* pci_dev; }; @@ -96,12 +89,6 @@ struct slot { struct list_head slot_list; }; -struct pci_resource { - struct pci_resource * next; - u32 base; - u32 length; -}; - struct event_info { u32 event_type; u8 hp_slot; @@ -113,10 +100,6 @@ struct controller { void * hpc_ctlr_handle; /* HPC controller handle */ int num_slots; /* Number of slots on ctlr */ int slot_num_inc; /* 1 or -1 */ - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; struct pci_dev *pci_dev; struct pci_bus *pci_bus; struct event_info event_queue[10]; @@ -139,20 +122,6 @@ struct controller { u16 vendor_id; }; -struct irq_mapping { - u8 barber_pole; - u8 valid_INT; - u8 interrupt[4]; -}; - -struct resource_lists { - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; - struct irq_mapping *irqs; -}; - /* Define AMD SHPC ID */ #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 @@ -197,7 +166,6 @@ struct resource_lists { #define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n" #define msg_HPC_non_shpc "The PCI hot plug controller is not supported by this driver.\n" #define msg_HPC_not_supported "This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n" -#define msg_unable_to_save "Unable to store PCI hot plug add resource information. This system must be rebooted before adding any PCI devices.\n" #define msg_button_on "PCI slot #%d - powering on due to button press.\n" #define msg_button_off "PCI slot #%d - powering off due to button press.\n" #define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n" @@ -207,7 +175,6 @@ struct resource_lists { extern void shpchp_create_ctrl_files (struct controller *ctrl); /* controller functions */ -extern int shpchprm_find_available_resources(struct controller *ctrl); extern int shpchp_event_start_thread(void); extern void shpchp_event_stop_thread(void); extern struct pci_func *shpchp_slot_create(unsigned char busnumber); @@ -220,19 +187,10 @@ extern u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id); extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id); extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id); -/* resource functions */ -extern int shpchp_resource_sort_and_combine(struct pci_resource **head); - /* pci functions */ -extern int shpchp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num); -/*extern int shpchp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, struct slot *slot);*/ extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num); -extern int shpchp_save_used_resources(struct controller *ctrl, struct pci_func * func, int flag); extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot); -extern void shpchp_destroy_board_resources(struct pci_func * func); -extern int shpchp_return_board_resources(struct pci_func * func, struct resource_lists * resources); -extern void shpchp_destroy_resource_list(struct resource_lists * resources); -extern int shpchp_configure_device(struct controller* ctrl, struct pci_func* func); +extern int shpchp_configure_device(struct slot *p_slot); extern int shpchp_unconfigure_device(struct pci_func* func); @@ -240,10 +198,6 @@ extern int shpchp_unconfigure_device(struct pci_func* func); extern struct controller *shpchp_ctrl_list; extern struct pci_func *shpchp_slot_list[256]; -/* These are added to support AMD shpc */ -extern u8 shpchp_nic_irq; -extern u8 shpchp_disk_irq; - struct ctrl_reg { volatile u32 base_offset; volatile u32 slot_avail1; @@ -398,15 +352,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl) return retval; } -/* Puts node back in the resource list pointed to by head */ -static inline void return_resource(struct pci_resource **head, struct pci_resource *node) -{ - if (!node || !head) - return; - node->next = *head; - *head = node; -} - #define SLOT_NAME_SIZE 10 static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot) diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 6f7d8a29957a..8f5da504df34 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -418,16 +418,8 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_ctrl_bus; } - /* Get IO, memory, and IRQ resources for new devices */ - rc = shpchprm_find_available_resources(ctrl); - ctrl->add_support = !rc; + ctrl->add_support = 1; - if (rc) { - dbg("shpchprm_find_available_resources = %#x\n", rc); - err("unable to locate PCI configuration resources for hot plug add.\n"); - goto err_out_free_ctrl_bus; - } - /* Setup the slot information structures */ rc = init_slots(ctrl); if (rc) { @@ -497,18 +489,6 @@ static int shpc_start_thread(void) return retval; } -static inline void __exit -free_shpchp_res(struct pci_resource *res) -{ - struct pci_resource *tres; - - while (res) { - tres = res; - res = res->next; - kfree(tres); - } -} - static void __exit unload_shpchpd(void) { struct pci_func *next; @@ -522,11 +502,6 @@ static void __exit unload_shpchpd(void) while (ctrl) { cleanup_slots(ctrl); - free_shpchp_res(ctrl->io_head); - free_shpchp_res(ctrl->mem_head); - free_shpchp_res(ctrl->p_mem_head); - free_shpchp_res(ctrl->bus_head); - kfree (ctrl->pci_bus); dbg("%s: calling release_ctlr\n", __FUNCTION__); @@ -541,11 +516,6 @@ static void __exit unload_shpchpd(void) for (loop = 0; loop < 256; loop++) { next = shpchp_slot_list[loop]; while (next != NULL) { - free_shpchp_res(next->io_head); - free_shpchp_res(next->mem_head); - free_shpchp_res(next->p_mem_head); - free_shpchp_res(next->bus_head); - TempSlot = next; next = next->next; kfree(TempSlot); @@ -607,9 +577,7 @@ error_hpc_init: if (retval) { shpchprm_cleanup(); shpchp_event_stop_thread(); - } else - shpchprm_print_pirt(); - + } return retval; } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 91c9903e621f..aa507e453e49 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -38,13 +38,10 @@ #include #include #include +#include "../pci.h" #include "shpchp.h" #include "shpchprm.h" -static u32 configure_new_device(struct controller *ctrl, struct pci_func *func, - u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev); -static int configure_new_function( struct controller *ctrl, struct pci_func *func, - u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev); static void interrupt_event_handler(struct controller *ctrl); static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ @@ -52,9 +49,6 @@ static struct semaphore event_exit; /* guard ensure thread has exited before ca static int event_finished; static unsigned long pushbutton_pending; /* = 0 */ -u8 shpchp_disk_irq; -u8 shpchp_nic_irq; - u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id) { struct controller *ctrl = (struct controller *) inst_id; @@ -260,624 +254,6 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) return rc; } - -/* - * sort_by_size - * - * Sorts nodes on the list by their length. - * Smallest first. - * - */ -static int sort_by_size(struct pci_resource **head) -{ - struct pci_resource *current_res; - struct pci_resource *next_res; - int out_of_order = 1; - - if (!(*head)) - return(1); - - if (!((*head)->next)) - return(0); - - while (out_of_order) { - out_of_order = 0; - - /* Special case for swapping list head */ - if (((*head)->next) && - ((*head)->length > (*head)->next->length)) { - out_of_order++; - current_res = *head; - *head = (*head)->next; - current_res->next = (*head)->next; - (*head)->next = current_res; - } - - current_res = *head; - - while (current_res->next && current_res->next->next) { - if (current_res->next->length > current_res->next->next->length) { - out_of_order++; - next_res = current_res->next; - current_res->next = current_res->next->next; - current_res = current_res->next; - next_res->next = current_res->next; - current_res->next = next_res; - } else - current_res = current_res->next; - } - } /* End of out_of_order loop */ - - return(0); -} - - -/* - * sort_by_max_size - * - * Sorts nodes on the list by their length. - * Largest first. - * - */ -static int sort_by_max_size(struct pci_resource **head) -{ - struct pci_resource *current_res; - struct pci_resource *next_res; - int out_of_order = 1; - - if (!(*head)) - return(1); - - if (!((*head)->next)) - return(0); - - while (out_of_order) { - out_of_order = 0; - - /* Special case for swapping list head */ - if (((*head)->next) && - ((*head)->length < (*head)->next->length)) { - out_of_order++; - current_res = *head; - *head = (*head)->next; - current_res->next = (*head)->next; - (*head)->next = current_res; - } - - current_res = *head; - - while (current_res->next && current_res->next->next) { - if (current_res->next->length < current_res->next->next->length) { - out_of_order++; - next_res = current_res->next; - current_res->next = current_res->next->next; - current_res = current_res->next; - next_res->next = current_res->next; - current_res->next = next_res; - } else - current_res = current_res->next; - } - } /* End of out_of_order loop */ - - return(0); -} - - -/* - * do_pre_bridge_resource_split - * - * Returns zero or one node of resources that aren't in use - * - */ -static struct pci_resource *do_pre_bridge_resource_split (struct pci_resource **head, struct pci_resource **orig_head, u32 alignment) -{ - struct pci_resource *prevnode = NULL; - struct pci_resource *node; - struct pci_resource *split_node; - u32 rc; - u32 temp_dword; - dbg("do_pre_bridge_resource_split\n"); - - if (!(*head) || !(*orig_head)) - return(NULL); - - rc = shpchp_resource_sort_and_combine(head); - - if (rc) - return(NULL); - - if ((*head)->base != (*orig_head)->base) - return(NULL); - - if ((*head)->length == (*orig_head)->length) - return(NULL); - - - /* If we got here, there the bridge requires some of the resource, but - * we may be able to split some off of the front - */ - node = *head; - - if (node->length & (alignment -1)) { - /* This one isn't an aligned length, so we'll make a new entry - * and split it up. - */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - temp_dword = (node->length | (alignment-1)) + 1 - alignment; - - split_node->base = node->base; - split_node->length = temp_dword; - - node->length -= temp_dword; - node->base += split_node->length; - - /* Put it in the list */ - *head = split_node; - split_node->next = node; - } - - if (node->length < alignment) { - return(NULL); - } - - /* Now unlink it */ - if (*head == node) { - *head = node->next; - node->next = NULL; - } else { - prevnode = *head; - while (prevnode->next != node) - prevnode = prevnode->next; - - prevnode->next = node->next; - node->next = NULL; - } - - return(node); -} - - -/* - * do_bridge_resource_split - * - * Returns zero or one node of resources that aren't in use - * - */ -static struct pci_resource *do_bridge_resource_split (struct pci_resource **head, u32 alignment) -{ - struct pci_resource *prevnode = NULL; - struct pci_resource *node; - u32 rc; - u32 temp_dword; - - if (!(*head)) - return(NULL); - - rc = shpchp_resource_sort_and_combine(head); - - if (rc) - return(NULL); - - node = *head; - - while (node->next) { - prevnode = node; - node = node->next; - kfree(prevnode); - } - - if (node->length < alignment) { - kfree(node); - return(NULL); - } - - if (node->base & (alignment - 1)) { - /* Short circuit if adjusted size is too small */ - temp_dword = (node->base | (alignment-1)) + 1; - if ((node->length - (temp_dword - node->base)) < alignment) { - kfree(node); - return(NULL); - } - - node->length -= (temp_dword - node->base); - node->base = temp_dword; - } - - if (node->length & (alignment - 1)) { - /* There's stuff in use after this node */ - kfree(node); - return(NULL); - } - - return(node); -} - - -/* - * get_io_resource - * - * this function sorts the resource list by size and then - * returns the first node of "size" length that is not in the - * ISA aliasing window. If it finds a node larger than "size" - * it will split it up. - * - * size must be a power of two. - */ -static struct pci_resource *get_io_resource (struct pci_resource **head, u32 size) -{ - struct pci_resource *prevnode; - struct pci_resource *node; - struct pci_resource *split_node = NULL; - u32 temp_dword; - - if (!(*head)) - return(NULL); - - if ( shpchp_resource_sort_and_combine(head) ) - return(NULL); - - if ( sort_by_size(head) ) - return(NULL); - - for (node = *head; node; node = node->next) { - if (node->length < size) - continue; - - if (node->base & (size - 1)) { - /* This one isn't base aligned properly - so we'll make a new entry and split it up */ - temp_dword = (node->base | (size-1)) + 1; - - /*/ Short circuit if adjusted size is too small */ - if ((node->length - (temp_dword - node->base)) < size) - continue; - - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base; - split_node->length = temp_dword - node->base; - node->base = temp_dword; - node->length -= split_node->length; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of non-aligned base */ - - /* Don't need to check if too small since we already did */ - if (node->length > size) { - /* This one is longer than we need - so we'll make a new entry and split it up */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base + size; - split_node->length = node->length - size; - node->length = size; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of too big on top end */ - - /* For IO make sure it's not in the ISA aliasing space */ - if (node->base & 0x300L) - continue; - - /* If we got here, then it is the right size - Now take it out of the list */ - if (*head == node) { - *head = node->next; - } else { - prevnode = *head; - while (prevnode->next != node) - prevnode = prevnode->next; - - prevnode->next = node->next; - } - node->next = NULL; - /* Stop looping */ - break; - } - - return(node); -} - - -/* - * get_max_resource - * - * Gets the largest node that is at least "size" big from the - * list pointed to by head. It aligns the node on top and bottom - * to "size" alignment before returning it. - * J.I. modified to put max size limits of; 64M->32M->16M->8M->4M->1M - * This is needed to avoid allocating entire ACPI _CRS res to one child bridge/slot. - */ -static struct pci_resource *get_max_resource (struct pci_resource **head, u32 size) -{ - struct pci_resource *max; - struct pci_resource *temp; - struct pci_resource *split_node; - u32 temp_dword; - u32 max_size[] = { 0x4000000, 0x2000000, 0x1000000, 0x0800000, 0x0400000, 0x0200000, 0x0100000, 0x00 }; - int i; - - if (!(*head)) - return(NULL); - - if (shpchp_resource_sort_and_combine(head)) - return(NULL); - - if (sort_by_max_size(head)) - return(NULL); - - for (max = *head;max; max = max->next) { - - /* If not big enough we could probably just bail, - instead we'll continue to the next. */ - if (max->length < size) - continue; - - if (max->base & (size - 1)) { - /* This one isn't base aligned properly - so we'll make a new entry and split it up */ - temp_dword = (max->base | (size-1)) + 1; - - /* Short circuit if adjusted size is too small */ - if ((max->length - (temp_dword - max->base)) < size) - continue; - - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = max->base; - split_node->length = temp_dword - max->base; - max->base = temp_dword; - max->length -= split_node->length; - - /* Put it next in the list */ - split_node->next = max->next; - max->next = split_node; - } - - if ((max->base + max->length) & (size - 1)) { - /* This one isn't end aligned properly at the top - so we'll make a new entry and split it up */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - temp_dword = ((max->base + max->length) & ~(size - 1)); - split_node->base = temp_dword; - split_node->length = max->length + max->base - - split_node->base; - max->length -= split_node->length; - - /* Put it in the list */ - split_node->next = max->next; - max->next = split_node; - } - - /* Make sure it didn't shrink too much when we aligned it */ - if (max->length < size) - continue; - - for ( i = 0; max_size[i] > size; i++) { - if (max->length > max_size[i]) { - split_node = kmalloc(sizeof(*split_node), - GFP_KERNEL); - if (!split_node) - break; /* return (NULL); */ - split_node->base = max->base + max_size[i]; - split_node->length = max->length - max_size[i]; - max->length = max_size[i]; - /* Put it next in the list */ - split_node->next = max->next; - max->next = split_node; - break; - } - } - - /* Now take it out of the list */ - temp = (struct pci_resource*) *head; - if (temp == max) { - *head = max->next; - } else { - while (temp && temp->next != max) { - temp = temp->next; - } - - temp->next = max->next; - } - - max->next = NULL; - return(max); - } - - /* If we get here, we couldn't find one */ - return(NULL); -} - - -/* - * get_resource - * - * this function sorts the resource list by size and then - * returns the first node of "size" length. If it finds a node - * larger than "size" it will split it up. - * - * size must be a power of two. - */ -static struct pci_resource *get_resource (struct pci_resource **head, u32 size) -{ - struct pci_resource *prevnode; - struct pci_resource *node; - struct pci_resource *split_node; - u32 temp_dword; - - if (!(*head)) - return(NULL); - - if ( shpchp_resource_sort_and_combine(head) ) - return(NULL); - - if ( sort_by_size(head) ) - return(NULL); - - for (node = *head; node; node = node->next) { - dbg("%s: req_size =0x%x node=%p, base=0x%x, length=0x%x\n", - __FUNCTION__, size, node, node->base, node->length); - if (node->length < size) - continue; - - if (node->base & (size - 1)) { - dbg("%s: not aligned\n", __FUNCTION__); - /* this one isn't base aligned properly - so we'll make a new entry and split it up */ - temp_dword = (node->base | (size-1)) + 1; - - /* Short circuit if adjusted size is too small */ - if ((node->length - (temp_dword - node->base)) < size) - continue; - - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base; - split_node->length = temp_dword - node->base; - node->base = temp_dword; - node->length -= split_node->length; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of non-aligned base */ - - /* Don't need to check if too small since we already did */ - if (node->length > size) { - dbg("%s: too big\n", __FUNCTION__); - /* this one is longer than we need - so we'll make a new entry and split it up */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base + size; - split_node->length = node->length - size; - node->length = size; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of too big on top end */ - - dbg("%s: got one!!!\n", __FUNCTION__); - /* If we got here, then it is the right size - Now take it out of the list */ - if (*head == node) { - *head = node->next; - } else { - prevnode = *head; - while (prevnode->next != node) - prevnode = prevnode->next; - - prevnode->next = node->next; - } - node->next = NULL; - /* Stop looping */ - break; - } - return(node); -} - - -/* - * shpchp_resource_sort_and_combine - * - * Sorts all of the nodes in the list in ascending order by - * their base addresses. Also does garbage collection by - * combining adjacent nodes. - * - * returns 0 if success - */ -int shpchp_resource_sort_and_combine(struct pci_resource **head) -{ - struct pci_resource *node1; - struct pci_resource *node2; - int out_of_order = 1; - - dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head); - - if (!(*head)) - return(1); - - dbg("*head->next = %p\n",(*head)->next); - - if (!(*head)->next) - return(0); /* only one item on the list, already sorted! */ - - dbg("*head->base = 0x%x\n",(*head)->base); - dbg("*head->next->base = 0x%x\n",(*head)->next->base); - while (out_of_order) { - out_of_order = 0; - - /* Special case for swapping list head */ - if (((*head)->next) && - ((*head)->base > (*head)->next->base)) { - node1 = *head; - (*head) = (*head)->next; - node1->next = (*head)->next; - (*head)->next = node1; - out_of_order++; - } - - node1 = (*head); - - while (node1->next && node1->next->next) { - if (node1->next->base > node1->next->next->base) { - out_of_order++; - node2 = node1->next; - node1->next = node1->next->next; - node1 = node1->next; - node2->next = node1->next; - node1->next = node2; - } else - node1 = node1->next; - } - } /* End of out_of_order loop */ - - node1 = *head; - - while (node1 && node1->next) { - if ((node1->base + node1->length) == node1->next->base) { - /* Combine */ - dbg("8..\n"); - node1->length += node1->next->length; - node2 = node1->next; - node1->next = node1->next->next; - kfree(node2); - } else - node1 = node1->next; - } - - return(0); -} - - /** * shpchp_slot_create - Creates a node and adds it to the proper bus. * @busnumber - bus where new node is to be located @@ -933,7 +309,6 @@ static int slot_remove(struct pci_func * old_slot) if (next == old_slot) { shpchp_slot_list[old_slot->bus] = old_slot->next; - shpchp_destroy_board_resources(old_slot); kfree(old_slot); return(0); } @@ -944,7 +319,6 @@ static int slot_remove(struct pci_func * old_slot) if (next->next == old_slot) { next->next = old_slot->next; - shpchp_destroy_board_resources(old_slot); kfree(old_slot); return(0); } else @@ -1120,12 +494,8 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) { u8 hp_slot; u8 slots_not_empty = 0; - int index; - u32 temp_register = 0xFFFFFFFF; - u32 retval, rc = 0; - struct pci_func *new_func = NULL; + u32 rc = 0; struct slot *p_slot; - struct resource_lists res_lists; enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; u8 pi, mode; @@ -1328,135 +698,65 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) /* Check for a power fault */ if (func->status == 0xFF) { /* power fault occurred, but it was benign */ - temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); + dbg("%s: power fault\n", __FUNCTION__); rc = POWER_FAILURE; func->status = 0; - } else { - /* Get vendor/device ID u32 */ - rc = pci_bus_read_config_dword (ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function), - PCI_VENDOR_ID, &temp_register); - dbg("%s: pci_bus_read_config_dword returns %d\n", __FUNCTION__, rc); - dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register); - - if (rc != 0) { - /* Something's wrong here */ - temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register); - } - /* Preset return code. It will be changed later if things go okay. */ - rc = NO_ADAPTER_PRESENT; + goto err_exit; } - /* All F's is an empty slot or an invalid board */ - if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */ - res_lists.io_head = ctrl->io_head; - res_lists.mem_head = ctrl->mem_head; - res_lists.p_mem_head = ctrl->p_mem_head; - res_lists.bus_head = ctrl->bus_head; - res_lists.irqs = NULL; - - rc = configure_new_device(ctrl, func, 0, &res_lists, 0, 0); - dbg("%s: back from configure_new_device\n", __FUNCTION__); - - ctrl->io_head = res_lists.io_head; - ctrl->mem_head = res_lists.mem_head; - ctrl->p_mem_head = res_lists.p_mem_head; - ctrl->bus_head = res_lists.bus_head; - - shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->io_head)); - shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - if (rc) { - /* Wait for exclusive access to hardware */ - down(&ctrl->crit_sect); - - /* turn off slot, turn on Amber LED, turn off Green LED */ - retval = p_slot->hpc_ops->slot_disable(p_slot); - if (retval) { - err("%s: Issue of Slot Enable command failed\n", __FUNCTION__); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return retval; - } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - - retval = p_slot->hpc_ops->check_cmd_status(ctrl); - if (retval) { - err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, retval); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return retval; - } + if (shpchp_configure_device(p_slot)) { + err("Cannot add device at 0x%x:0x%x\n", p_slot->bus, + p_slot->device); + goto err_exit; + } - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); + shpchp_save_slot_config(ctrl, func); - return(rc); - } - shpchp_save_slot_config(ctrl, func); + func->status = 0; + func->switch_save = 0x10; + func->is_a_board = 0x01; + func->pwr_save = 1; - func->status = 0; - func->switch_save = 0x10; - func->is_a_board = 0x01; - func->pwr_save = 1; + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); - /* Next, we will instantiate the linux pci_dev structures - * (with appropriate driver notification, if already present) - */ - index = 0; - do { - new_func = shpchp_slot_find(ctrl->slot_bus, func->device, index++); - if (new_func && !new_func->pci_dev) { - dbg("%s:call pci_hp_configure_dev\n", __FUNCTION__); - shpchp_configure_device(ctrl, new_func); - } - } while (new_func); + p_slot->hpc_ops->green_led_on(p_slot); - /* Wait for exclusive access to hardware */ - down(&ctrl->crit_sect); + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); - p_slot->hpc_ops->green_led_on(p_slot); + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); + return 0; +err_exit: + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + /* turn off slot, turn on Amber LED, turn off Green LED */ + rc = p_slot->hpc_ops->slot_disable(p_slot); + if (rc) { + err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); + return rc; + } + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); - } else { - /* Wait for exclusive access to hardware */ - down(&ctrl->crit_sect); - - /* turn off slot, turn on Amber LED, turn off Green LED */ - rc = p_slot->hpc_ops->slot_disable(p_slot); - if (rc) { - err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return rc; - } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - - rc = p_slot->hpc_ops->check_cmd_status(ctrl); - if (rc) { - err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return rc; - } - + rc = p_slot->hpc_ops->check_cmd_status(ctrl); + if (rc) { + err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); - - return(rc); + return rc; } - return 0; + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + + return(rc); } @@ -1466,13 +766,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) */ static u32 remove_board(struct pci_func *func, struct controller *ctrl) { - int index; - u8 skip = 0; u8 device; u8 hp_slot; u32 rc; - struct resource_lists res_lists; - struct pci_func *temp_func; struct slot *p_slot; if (func == NULL) @@ -1488,27 +784,6 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); - if ((ctrl->add_support) && - !(func->bus_head || func->mem_head || func->p_mem_head || func->io_head)) { - /* Here we check to see if we've saved any of the board's - * resources already. If so, we'll skip the attempt to - * determine what's being used. - */ - index = 0; - - temp_func = func; - - while ((temp_func = shpchp_slot_find(temp_func->bus, temp_func->device, index++))) { - if (temp_func->bus_head || temp_func->mem_head - || temp_func->p_mem_head || temp_func->io_head) { - skip = 1; - break; - } - } - - if (!skip) - rc = shpchp_save_used_resources(ctrl, func, DISABLE_CARD); - } /* Change status to shutdown */ if (func->is_a_board) func->status = 0x01; @@ -1551,26 +826,6 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) if (ctrl->add_support) { while (func) { - res_lists.io_head = ctrl->io_head; - res_lists.mem_head = ctrl->mem_head; - res_lists.p_mem_head = ctrl->p_mem_head; - res_lists.bus_head = ctrl->bus_head; - - dbg("Returning resources to ctlr lists for (B/D/F) = (%#x/%#x/%#x)\n", func->bus, - func->device, func->function); - - shpchp_return_board_resources(func, &res_lists); - - ctrl->io_head = res_lists.io_head; - ctrl->mem_head = res_lists.mem_head; - ctrl->p_mem_head = res_lists.p_mem_head; - ctrl->bus_head = res_lists.bus_head; - - shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->io_head)); - shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - if (is_bridge(func)) { dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); @@ -2050,798 +1305,3 @@ int shpchp_disable_slot (struct slot *p_slot) return rc; } - -/** - * configure_new_device - Configures the PCI header information of one board. - * - * @ctrl: pointer to controller structure - * @func: pointer to function structure - * @behind_bridge: 1 if this is a recursive call, 0 if not - * @resources: pointer to set of resource lists - * - * Returns 0 if success - * - */ -static u32 configure_new_device (struct controller * ctrl, struct pci_func * func, - u8 behind_bridge, struct resource_lists * resources, u8 bridge_bus, u8 bridge_dev) -{ - u8 temp_byte, function, max_functions, stop_it; - int rc; - u32 ID; - struct pci_func *new_slot; - struct pci_bus lpci_bus, *pci_bus; - int index; - - new_slot = func; - - dbg("%s\n", __FUNCTION__); - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - - /* Check for Multi-function device */ - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte); - if (rc) { - dbg("%s: rc = %d\n", __FUNCTION__, rc); - return rc; - } - - if (temp_byte & 0x80) /* Multi-function device */ - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - rc = configure_new_function(ctrl, new_slot, behind_bridge, resources, bridge_bus, bridge_dev); - - if (rc) { - dbg("configure_new_function failed %d\n",rc); - index = 0; - - while (new_slot) { - new_slot = shpchp_slot_find(new_slot->bus, new_slot->device, index++); - - if (new_slot) - shpchp_return_board_resources(new_slot, resources); - } - - return(rc); - } - - function++; - - stop_it = 0; - - /* The following loop skips to the next present function - * and creates a board structure - */ - - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID); - - if (ID == 0xFFFFFFFF) { /* There's nothing there. */ - function++; - } else { /* There's something there */ - /* Setup slot structure. */ - new_slot = shpchp_slot_create(func->bus); - - if (new_slot == NULL) { - /* Out of memory */ - return(1); - } - - new_slot->bus = func->bus; - new_slot->device = func->device; - new_slot->function = function; - new_slot->is_a_board = 1; - new_slot->status = 0; - - stop_it++; - } - } - - } while (function < max_functions); - dbg("returning from configure_new_device\n"); - - return 0; -} - - -/* - * Configuration logic that involves the hotplug data structures and - * their bookkeeping - */ - - -/** - * configure_new_function - Configures the PCI header information of one device - * - * @ctrl: pointer to controller structure - * @func: pointer to function structure - * @behind_bridge: 1 if this is a recursive call, 0 if not - * @resources: pointer to set of resource lists - * - * Calls itself recursively for bridged devices. - * Returns 0 if success - * - */ -static int configure_new_function (struct controller * ctrl, struct pci_func * func, - u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev) -{ - int cloop; - u8 temp_byte; - u8 device; - u8 class_code; - u16 temp_word; - u32 rc; - u32 temp_register; - u32 base; - u32 ID; - unsigned int devfn; - struct pci_resource *mem_node; - struct pci_resource *p_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - struct pci_resource *hold_mem_node; - struct pci_resource *hold_p_mem_node; - struct pci_resource *hold_IO_node; - struct pci_resource *hold_bus_node; - struct irq_mapping irqs; - struct pci_func *new_slot; - struct pci_bus lpci_bus, *pci_bus; - struct resource_lists temp_resources; -#if defined(CONFIG_X86_64) - u8 IRQ=0; -#endif - - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Check for Bridge */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte); - if (rc) - return rc; - - if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - /* set Primary bus */ - dbg("set Primary bus = 0x%x\n", func->bus); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus); - if (rc) - return rc; - - /* find range of busses to use */ - bus_node = get_max_resource(&resources->bus_head, 1L); - - /* If we don't have any busses to allocate, we can't continue */ - if (!bus_node) { - err("Got NO bus resource to use\n"); - return -ENOMEM; - } - dbg("Got ranges of buses to use: base:len=0x%x:%x\n", bus_node->base, bus_node->length); - - /* set Secondary bus */ - temp_byte = (u8)bus_node->base; - dbg("set Secondary bus = 0x%x\n", temp_byte); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte); - if (rc) - return rc; - - /* set subordinate bus */ - temp_byte = (u8)(bus_node->base + bus_node->length - 1); - dbg("set subordinate bus = 0x%x\n", temp_byte); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); - if (rc) - return rc; - - /* Set HP parameters (Cache Line Size, Latency Timer) */ - rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_BRIDGE); - if (rc) - return rc; - - /* Setup the IO, memory, and prefetchable windows */ - - io_node = get_max_resource(&(resources->io_head), 0x1000L); - if (io_node) { - dbg("io_node(base, len, next) (%x, %x, %p)\n", io_node->base, io_node->length, io_node->next); - } - - mem_node = get_max_resource(&(resources->mem_head), 0x100000L); - if (mem_node) { - dbg("mem_node(base, len, next) (%x, %x, %p)\n", mem_node->base, mem_node->length, mem_node->next); - } - - if (resources->p_mem_head) - p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000L); - else { - /* - * In some platform implementation, MEM and PMEM are not - * distinguished, and hence ACPI _CRS has only MEM entries - * for both MEM and PMEM. - */ - dbg("using MEM for PMEM\n"); - p_mem_node = get_max_resource(&(resources->mem_head), 0x100000L); - } - if (p_mem_node) { - dbg("p_mem_node(base, len, next) (%x, %x, %p)\n", p_mem_node->base, p_mem_node->length, p_mem_node->next); - } - - /* set up the IRQ info */ - if (!resources->irqs) { - irqs.barber_pole = 0; - irqs.interrupt[0] = 0; - irqs.interrupt[1] = 0; - irqs.interrupt[2] = 0; - irqs.interrupt[3] = 0; - irqs.valid_INT = 0; - } else { - irqs.barber_pole = resources->irqs->barber_pole; - irqs.interrupt[0] = resources->irqs->interrupt[0]; - irqs.interrupt[1] = resources->irqs->interrupt[1]; - irqs.interrupt[2] = resources->irqs->interrupt[2]; - irqs.interrupt[3] = resources->irqs->interrupt[3]; - irqs.valid_INT = resources->irqs->valid_INT; - } - - /* set up resource lists that are now aligned on top and bottom - * for anything behind the bridge. - */ - temp_resources.bus_head = bus_node; - temp_resources.io_head = io_node; - temp_resources.mem_head = mem_node; - temp_resources.p_mem_head = p_mem_node; - temp_resources.irqs = &irqs; - - /* Make copies of the nodes we are going to pass down so that - * if there is a problem,we can just use these to free resources - */ - hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL); - hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL); - hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL); - hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL); - - if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) { - kfree(hold_bus_node); - kfree(hold_IO_node); - kfree(hold_mem_node); - kfree(hold_p_mem_node); - - return 1; - } - - memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource)); - - bus_node->base += 1; - bus_node->length -= 1; - bus_node->next = NULL; - - /* If we have IO resources copy them and fill in the bridge's - * IO range registers - */ - if (io_node) { - memcpy(hold_IO_node, io_node, sizeof(struct pci_resource)); - io_node->next = NULL; - - /* set IO base and Limit registers */ - RES_CHECK(io_node->base, 8); - temp_byte = (u8)(io_node->base >> 8); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte); - - RES_CHECK(io_node->base + io_node->length - 1, 8); - temp_byte = (u8)((io_node->base + io_node->length - 1) >> 8); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte); - } else { - kfree(hold_IO_node); - hold_IO_node = NULL; - } - - /* If we have memory resources copy them and fill in the bridge's - * memory range registers. Otherwise, fill in the range - * registers with values that disable them. - */ - if (mem_node) { - memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource)); - mem_node->next = NULL; - - /* set Mem base and Limit registers */ - RES_CHECK(mem_node->base, 16); - temp_word = (u32)(mem_node->base >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word); - - RES_CHECK(mem_node->base + mem_node->length - 1, 16); - temp_word = (u32)((mem_node->base + mem_node->length - 1) >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - } else { - temp_word = 0xFFFF; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word); - - temp_word = 0x0000; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - - kfree(hold_mem_node); - hold_mem_node = NULL; - } - - /* If we have prefetchable memory resources copy them and - * fill in the bridge's memory range registers. Otherwise, - * fill in the range registers with values that disable them. - */ - if (p_mem_node) { - memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource)); - p_mem_node->next = NULL; - - /* set Pre Mem base and Limit registers */ - RES_CHECK(p_mem_node->base, 16); - temp_word = (u32)(p_mem_node->base >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); - - RES_CHECK(p_mem_node->base + p_mem_node->length - 1, 16); - temp_word = (u32)((p_mem_node->base + p_mem_node->length - 1) >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - } else { - temp_word = 0xFFFF; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); - - temp_word = 0x0000; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - - kfree(hold_p_mem_node); - hold_p_mem_node = NULL; - } - - /* Adjust this to compensate for extra adjustment in first loop */ - irqs.barber_pole--; - - rc = 0; - - /* Here we actually find the devices and configure them */ - for (device = 0; (device <= 0x1F) && !rc; device++) { - irqs.barber_pole = (irqs.barber_pole + 1) & 0x03; - - ID = 0xFFFFFFFF; - pci_bus->number = hold_bus_node->base; - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), - PCI_VENDOR_ID, &ID); - pci_bus->number = func->bus; - - if (ID != 0xFFFFFFFF) { /* device Present */ - /* Setup slot structure. */ - new_slot = shpchp_slot_create(hold_bus_node->base); - - if (new_slot == NULL) { - /* Out of memory */ - rc = -ENOMEM; - continue; - } - - new_slot->bus = hold_bus_node->base; - new_slot->device = device; - new_slot->function = 0; - new_slot->is_a_board = 1; - new_slot->status = 0; - - rc = configure_new_device(ctrl, new_slot, 1, &temp_resources, func->bus, func->device); - dbg("configure_new_device rc=0x%x\n",rc); - } /* End of IF (device in slot?) */ - } /* End of FOR loop */ - - if (rc) { - shpchp_destroy_resource_list(&temp_resources); - - return_resource(&(resources->bus_head), hold_bus_node); - return_resource(&(resources->io_head), hold_IO_node); - return_resource(&(resources->mem_head), hold_mem_node); - return_resource(&(resources->p_mem_head), hold_p_mem_node); - return(rc); - } - - /* save the interrupt routing information */ - if (resources->irqs) { - resources->irqs->interrupt[0] = irqs.interrupt[0]; - resources->irqs->interrupt[1] = irqs.interrupt[1]; - resources->irqs->interrupt[2] = irqs.interrupt[2]; - resources->irqs->interrupt[3] = irqs.interrupt[3]; - resources->irqs->valid_INT = irqs.valid_INT; - } else if (!behind_bridge) { - /* We need to hook up the interrupts here */ - for (cloop = 0; cloop < 4; cloop++) { - if (irqs.valid_INT & (0x01 << cloop)) { - rc = shpchp_set_irq(func->bus, func->device, - 0x0A + cloop, irqs.interrupt[cloop]); - if (rc) { - shpchp_destroy_resource_list (&temp_resources); - return_resource(&(resources->bus_head), hold_bus_node); - return_resource(&(resources->io_head), hold_IO_node); - return_resource(&(resources->mem_head), hold_mem_node); - return_resource(&(resources->p_mem_head), hold_p_mem_node); - return rc; - } - } - } /* end of for loop */ - } - - /* Return unused bus resources - * First use the temporary node to store information for the board - */ - if (hold_bus_node && bus_node && temp_resources.bus_head) { - hold_bus_node->length = bus_node->base - hold_bus_node->base; - - hold_bus_node->next = func->bus_head; - func->bus_head = hold_bus_node; - - temp_byte = (u8)(temp_resources.bus_head->base - 1); - - /* set subordinate bus */ - dbg("re-set subordinate bus = 0x%x\n", temp_byte); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); - - if (temp_resources.bus_head->length == 0) { - kfree(temp_resources.bus_head); - temp_resources.bus_head = NULL; - } else { - dbg("return bus res of b:d(0x%x:%x) base:len(0x%x:%x)\n", - func->bus, func->device, temp_resources.bus_head->base, temp_resources.bus_head->length); - return_resource(&(resources->bus_head), temp_resources.bus_head); - } - } - - /* If we have IO space available and there is some left, - * return the unused portion - */ - if (hold_IO_node && temp_resources.io_head) { - io_node = do_pre_bridge_resource_split(&(temp_resources.io_head), - &hold_IO_node, 0x1000); - - /* Check if we were able to split something off */ - if (io_node) { - hold_IO_node->base = io_node->base + io_node->length; - - RES_CHECK(hold_IO_node->base, 8); - temp_byte = (u8)((hold_IO_node->base) >> 8); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte); - - return_resource(&(resources->io_head), io_node); - } - - io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000); - - /* Check if we were able to split something off */ - if (io_node) { - /* First use the temporary node to store information for the board */ - hold_IO_node->length = io_node->base - hold_IO_node->base; - - /* If we used any, add it to the board's list */ - if (hold_IO_node->length) { - hold_IO_node->next = func->io_head; - func->io_head = hold_IO_node; - - RES_CHECK(io_node->base - 1, 8); - temp_byte = (u8)((io_node->base - 1) >> 8); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte); - - return_resource(&(resources->io_head), io_node); - } else { - /* it doesn't need any IO */ - temp_byte = 0x00; - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte); - - return_resource(&(resources->io_head), io_node); - kfree(hold_IO_node); - } - } else { - /* it used most of the range */ - hold_IO_node->next = func->io_head; - func->io_head = hold_IO_node; - } - } else if (hold_IO_node) { - /* it used the whole range */ - hold_IO_node->next = func->io_head; - func->io_head = hold_IO_node; - } - - /* If we have memory space available and there is some left, - * return the unused portion - */ - if (hold_mem_node && temp_resources.mem_head) { - mem_node = do_pre_bridge_resource_split(&(temp_resources.mem_head), &hold_mem_node, 0x100000L); - - /* Check if we were able to split something off */ - if (mem_node) { - hold_mem_node->base = mem_node->base + mem_node->length; - - RES_CHECK(hold_mem_node->base, 16); - temp_word = (u32)((hold_mem_node->base) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word); - - return_resource(&(resources->mem_head), mem_node); - } - - mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000L); - - /* Check if we were able to split something off */ - if (mem_node) { - /* First use the temporary node to store information for the board */ - hold_mem_node->length = mem_node->base - hold_mem_node->base; - - if (hold_mem_node->length) { - hold_mem_node->next = func->mem_head; - func->mem_head = hold_mem_node; - - /* configure end address */ - RES_CHECK(mem_node->base - 1, 16); - temp_word = (u32)((mem_node->base - 1) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - - /* Return unused resources to the pool */ - return_resource(&(resources->mem_head), mem_node); - } else { - /* it doesn't need any Mem */ - temp_word = 0x0000; - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - - return_resource(&(resources->mem_head), mem_node); - kfree(hold_mem_node); - } - } else { - /* it used most of the range */ - hold_mem_node->next = func->mem_head; - func->mem_head = hold_mem_node; - } - } else if (hold_mem_node) { - /* it used the whole range */ - hold_mem_node->next = func->mem_head; - func->mem_head = hold_mem_node; - } - - /* If we have prefetchable memory space available and there is some - * left at the end, return the unused portion - */ - if (hold_p_mem_node && temp_resources.p_mem_head) { - p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head), - &hold_p_mem_node, 0x100000L); - - /* Check if we were able to split something off */ - if (p_mem_node) { - hold_p_mem_node->base = p_mem_node->base + p_mem_node->length; - - RES_CHECK(hold_p_mem_node->base, 16); - temp_word = (u32)((hold_p_mem_node->base) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); - - return_resource(&(resources->p_mem_head), p_mem_node); - } - - p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000L); - - /* Check if we were able to split something off */ - if (p_mem_node) { - /* First use the temporary node to store information for the board */ - hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base; - - /* If we used any, add it to the board's list */ - if (hold_p_mem_node->length) { - hold_p_mem_node->next = func->p_mem_head; - func->p_mem_head = hold_p_mem_node; - - RES_CHECK(p_mem_node->base - 1, 16); - temp_word = (u32)((p_mem_node->base - 1) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - - return_resource(&(resources->p_mem_head), p_mem_node); - } else { - /* it doesn't need any PMem */ - temp_word = 0x0000; - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - - return_resource(&(resources->p_mem_head), p_mem_node); - kfree(hold_p_mem_node); - } - } else { - /* it used the most of the range */ - hold_p_mem_node->next = func->p_mem_head; - func->p_mem_head = hold_p_mem_node; - } - } else if (hold_p_mem_node) { - /* it used the whole range */ - hold_p_mem_node->next = func->p_mem_head; - func->p_mem_head = hold_p_mem_node; - } - - /* We should be configuring an IRQ and the bridge's base address - * registers if it needs them. Although we have never seen such - * a device - */ - - shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_BRIDGE); - - dbg("PCI Bridge Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); - } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - /* Standard device */ - u64 base64; - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - - if (class_code == PCI_BASE_CLASS_DISPLAY) - return (DEVICE_TYPE_NOT_SUPPORTED); - - /* Figure out IO and memory needs */ - for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) { - temp_register = 0xFFFFFFFF; - - rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); - rc = pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register); - dbg("Bar[%x]=0x%x on bus:dev:func(0x%x:%x:%x)\n", cloop, temp_register, func->bus, func->device, - func->function); - - if (!temp_register) - continue; - - base64 = 0L; - if (temp_register & PCI_BASE_ADDRESS_SPACE_IO) { - /* Map IO */ - - /* set base = amount of IO space */ - base = temp_register & 0xFFFFFFFC; - base = ~base + 1; - - dbg("NEED IO length(0x%x)\n", base); - io_node = get_io_resource(&(resources->io_head),(ulong)base); - - /* allocate the resource to the board */ - if (io_node) { - dbg("Got IO base=0x%x(length=0x%x)\n", io_node->base, io_node->length); - base = (u32)io_node->base; - io_node->next = func->io_head; - func->io_head = io_node; - } else { - err("Got NO IO resource(length=0x%x)\n", base); - return -ENOMEM; - } - } else { /* map MEM */ - int prefetchable = 1; - struct pci_resource **res_node = &func->p_mem_head; - char *res_type_str = "PMEM"; - u32 temp_register2; - - if (!(temp_register & PCI_BASE_ADDRESS_MEM_PREFETCH)) { - prefetchable = 0; - res_node = &func->mem_head; - res_type_str++; - } - - base = temp_register & 0xFFFFFFF0; - base = ~base + 1; - - switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) { - case PCI_BASE_ADDRESS_MEM_TYPE_32: - dbg("NEED 32 %s bar=0x%x(length=0x%x)\n", res_type_str, temp_register, base); - - if (prefetchable && resources->p_mem_head) - mem_node=get_resource(&(resources->p_mem_head), (ulong)base); - else { - if (prefetchable) - dbg("using MEM for PMEM\n"); - mem_node=get_resource(&(resources->mem_head), (ulong)base); - } - - /* allocate the resource to the board */ - if (mem_node) { - base = (u32)mem_node->base; - mem_node->next = *res_node; - *res_node = mem_node; - dbg("Got 32 %s base=0x%x(length=0x%x)\n", res_type_str, mem_node->base, - mem_node->length); - } else { - err("Got NO 32 %s resource(length=0x%x)\n", res_type_str, base); - return -ENOMEM; - } - break; - case PCI_BASE_ADDRESS_MEM_TYPE_64: - rc = pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2); - dbg("NEED 64 %s bar=0x%x:%x(length=0x%x)\n", res_type_str, temp_register2, - temp_register, base); - - if (prefetchable && resources->p_mem_head) - mem_node = get_resource(&(resources->p_mem_head), (ulong)base); - else { - if (prefetchable) - dbg("using MEM for PMEM\n"); - mem_node = get_resource(&(resources->mem_head), (ulong)base); - } - - /* allocate the resource to the board */ - if (mem_node) { - base64 = mem_node->base; - mem_node->next = *res_node; - *res_node = mem_node; - dbg("Got 64 %s base=0x%x:%x(length=%x)\n", res_type_str, (u32)(base64 >> 32), - (u32)base64, mem_node->length); - } else { - err("Got NO 64 %s resource(length=0x%x)\n", res_type_str, base); - return -ENOMEM; - } - break; - default: - dbg("reserved BAR type=0x%x\n", temp_register); - break; - } - - } - - if (base64) { - rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64); - cloop += 4; - base64 >>= 32; - - if (base64) { - dbg("%s: high dword of base64(0x%x) set to 0\n", __FUNCTION__, (u32)base64); - base64 = 0x0L; - } - - rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64); - } else { - rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base); - } - } /* End of base register loop */ - -#if defined(CONFIG_X86_64) - /* Figure out which interrupt pin this function uses */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_INTERRUPT_PIN, &temp_byte); - - /* If this function needs an interrupt and we are behind a bridge - and the pin is tied to something that's alread mapped, - set this one the same - */ - if (temp_byte && resources->irqs && - (resources->irqs->valid_INT & - (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) { - /* We have to share with something already set up */ - IRQ = resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03]; - } else { - /* Program IRQ based on card type */ - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - - if (class_code == PCI_BASE_CLASS_STORAGE) { - IRQ = shpchp_disk_irq; - } else { - IRQ = shpchp_nic_irq; - } - } - - /* IRQ Line */ - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ); - - if (!behind_bridge) { - rc = shpchp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ); - if (rc) - return(1); - } else { - /* TBD - this code may also belong in the other clause of this If statement */ - resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ; - resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03; - } -#endif - /* Disable ROM base Address */ - rc = pci_bus_write_config_dword (pci_bus, devfn, PCI_ROM_ADDRESS, 0x00); - - /* Set HP parameters (Cache Line Size, Latency Timer) */ - rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_NORMAL); - if (rc) - return rc; - - shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_NORMAL); - - dbg("PCI function Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); - } /* End of Not-A-Bridge else */ - else { - /* It's some strange type of PCI adapter (Cardbus?) */ - return(DEVICE_TYPE_NOT_SUPPORTED); - } - - func->configured = 1; - - return 0; -} - diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index d867099114ec..89e404805777 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -37,46 +37,69 @@ #include #include "../pci.h" #include "shpchp.h" -#ifndef CONFIG_IA64 -#include "../../../arch/i386/pci/pci.h" /* horrible hack showing how processor dependant we are... */ -#endif -int shpchp_configure_device (struct controller* ctrl, struct pci_func* func) +int shpchp_configure_device(struct slot *p_slot) { - unsigned char bus; - struct pci_bus *child; - int num; - - if (func->pci_dev == NULL) - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); - - /* Still NULL ? Well then scan for it ! */ - if (func->pci_dev == NULL) { - num = pci_scan_slot(ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function)); - if (num) { - dbg("%s: subordiante %p number %x\n", __FUNCTION__, ctrl->pci_dev->subordinate, - ctrl->pci_dev->subordinate->number); - pci_bus_add_devices(ctrl->pci_dev->subordinate); - } - - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); - if (func->pci_dev == NULL) { - dbg("ERROR: pci_dev still null\n"); - return 0; - } + struct pci_dev *dev; + struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; + int num, fn; + + dev = pci_find_slot(p_slot->bus, PCI_DEVFN(p_slot->device, 0)); + if (dev) { + err("Device %s already exists at %x:%x, cannot hot-add\n", + pci_name(dev), p_slot->bus, p_slot->device); + return -EINVAL; } - if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus); - child = pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus); - pci_do_scan_bus(child); + num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0)); + if (num == 0) { + err("No new device found\n"); + return -ENODEV; + } + for (fn = 0; fn < 8; fn++) { + if (!(dev = pci_find_slot(p_slot->bus, + PCI_DEVFN(p_slot->device, fn)))) + continue; + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + err("Cannot hot-add display device %s\n", + pci_name(dev)); + continue; + } + if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) || + (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { + /* Find an unused bus number for the new bridge */ + struct pci_bus *child; + unsigned char busnr, start = parent->secondary; + unsigned char end = parent->subordinate; + for (busnr = start; busnr <= end; busnr++) { + if (!pci_find_bus(pci_domain_nr(parent), + busnr)) + break; + } + if (busnr >= end) { + err("No free bus for hot-added bridge\n"); + continue; + } + child = pci_add_new_bus(parent, dev, busnr); + if (!child) { + err("Cannot add new bus for %s\n", + pci_name(dev)); + continue; + } + child->subordinate = pci_do_scan_bus(child); + pci_bus_size_bridges(child); + } + /* TBD: program firmware provided _HPP values */ + /* program_fw_provided_values(dev); */ } + pci_bus_assign_resources(parent); + pci_bus_add_devices(parent); + pci_enable_bridges(parent); return 0; } - int shpchp_unconfigure_device(struct pci_func* func) { int rc = 0; @@ -95,44 +118,6 @@ int shpchp_unconfigure_device(struct pci_func* func) return rc; } -/* - * shpchp_set_irq - * - * @bus_num: bus number of PCI device - * @dev_num: device number of PCI device - * @slot: pointer to u8 where slot number will be returned - */ -int shpchp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) -{ -#if defined(CONFIG_X86) && !defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_64) - int rc; - u16 temp_word; - struct pci_dev fakedev; - struct pci_bus fakebus; - - fakedev.devfn = dev_num << 3; - fakedev.bus = &fakebus; - fakebus.number = bus_num; - dbg("%s: dev %d, bus %d, pin %d, num %d\n", - __FUNCTION__, dev_num, bus_num, int_pin, irq_num); - rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num); - dbg("%s: rc %d\n", __FUNCTION__, rc); - if (!rc) - return !rc; - - /* set the Edge Level Control Register (ELCR) */ - temp_word = inb(0x4d0); - temp_word |= inb(0x4d1) << 8; - - temp_word |= 0x01 << irq_num; - - /* This should only be for x86 as it sets the Edge Level Control Register */ - outb((u8) (temp_word & 0xFF), 0x4d0); - outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1); -#endif - return 0; -} - /* More PCI configuration routines; this time centered around hotplug controller */ @@ -447,364 +432,3 @@ int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot) return 0; } - -/* - * shpchp_save_used_resources - * - * Stores used resource information for existing boards. this is - * for boards that were in the system when this driver was loaded. - * this function is for hot plug ADD - * - * returns 0 if success - * if disable == 1(DISABLE_CARD), - * it loops for all functions of the slot and disables them. - * else, it just get resources of the function and return. - */ -int shpchp_save_used_resources(struct controller *ctrl, struct pci_func *func, int disable) -{ - u8 cloop; - u8 header_type; - u8 secondary_bus; - u8 temp_byte; - u16 command; - u16 save_command; - u16 w_base, w_length; - u32 temp_register; - u32 save_base; - u32 base, length; - u64 base64 = 0; - int index = 0; - unsigned int devfn; - struct pci_resource *mem_node = NULL; - struct pci_resource *p_mem_node = NULL; - struct pci_resource *t_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - struct pci_bus lpci_bus, *pci_bus; - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - - if (disable) - func = shpchp_slot_find(func->bus, func->device, index++); - - while ((func != NULL) && func->is_a_board) { - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Save the command register */ - pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command); - - if (disable) { - /* disable card */ - command = 0x00; - pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - } - - /* Check for Bridge */ - pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - dbg("Save_used_res of PCI bridge b:d=0x%x:%x, sc=0x%x\n", - func->bus, func->device, save_command); - if (disable) { - /* Clear Bridge Control Register */ - command = 0x00; - pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command); - } - - pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); - pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte); - - bus_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!bus_node) - return -ENOMEM; - - bus_node->base = (ulong)secondary_bus; - bus_node->length = (ulong)(temp_byte - secondary_bus + 1); - - bus_node->next = func->bus_head; - func->bus_head = bus_node; - - /* Save IO base and Limit registers */ - pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &temp_byte); - base = temp_byte; - pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &temp_byte); - length = temp_byte; - - if ((base <= length) && (!disable || (save_command & PCI_COMMAND_IO))) { - io_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)(base & PCI_IO_RANGE_MASK) << 8; - io_node->length = (ulong)(length - base + 0x10) << 8; - - io_node->next = func->io_head; - func->io_head = io_node; - } - - /* Save memory base and Limit registers */ - pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base); - pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length); - - if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) { - mem_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!mem_node) - return -ENOMEM; - - mem_node->base = (ulong)w_base << 16; - mem_node->length = (ulong)(w_length - w_base + 0x10) << 16; - - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - /* Save prefetchable memory base and Limit registers */ - pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base); - pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length); - - if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) { - p_mem_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!p_mem_node) - return -ENOMEM; - - p_mem_node->base = (ulong)w_base << 16; - p_mem_node->length = (ulong)(w_length - w_base + 0x10) << 16; - - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } - } else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - dbg("Save_used_res of PCI adapter b:d=0x%x:%x, sc=0x%x\n", - func->bus, func->device, save_command); - - /* Figure out IO and memory base lengths */ - for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) { - pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base); - - temp_register = 0xFFFFFFFF; - pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register); - pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register); - - if (!disable) - pci_bus_write_config_dword(pci_bus, devfn, cloop, save_base); - - if (!temp_register) - continue; - - base = temp_register; - - if ((base & PCI_BASE_ADDRESS_SPACE_IO) && - (!disable || (save_command & PCI_COMMAND_IO))) { - /* IO base */ - /* set temp_register = amount of IO space requested */ - base = base & 0xFFFFFFFCL; - base = (~base) + 1; - - io_node = kmalloc(sizeof (struct pci_resource), - GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)save_base & PCI_BASE_ADDRESS_IO_MASK; - io_node->length = (ulong)base; - dbg("sur adapter: IO bar=0x%x(length=0x%x)\n", - io_node->base, io_node->length); - - io_node->next = func->io_head; - func->io_head = io_node; - } else { /* map Memory */ - int prefetchable = 1; - /* struct pci_resources **res_node; */ - char *res_type_str = "PMEM"; - u32 temp_register2; - - t_mem_node = kmalloc(sizeof (struct pci_resource), - GFP_KERNEL); - if (!t_mem_node) - return -ENOMEM; - - if (!(base & PCI_BASE_ADDRESS_MEM_PREFETCH) && - (!disable || (save_command & PCI_COMMAND_MEMORY))) { - prefetchable = 0; - mem_node = t_mem_node; - res_type_str++; - } else - p_mem_node = t_mem_node; - - base = base & 0xFFFFFFF0L; - base = (~base) + 1; - - switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) { - case PCI_BASE_ADDRESS_MEM_TYPE_32: - if (prefetchable) { - p_mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK; - p_mem_node->length = (ulong)base; - dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n", - res_type_str, - p_mem_node->base, - p_mem_node->length); - - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } else { - mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK; - mem_node->length = (ulong)base; - dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n", - res_type_str, - mem_node->base, - mem_node->length); - - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - break; - case PCI_BASE_ADDRESS_MEM_TYPE_64: - pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2); - base64 = temp_register2; - base64 = (base64 << 32) | save_base; - - if (temp_register2) { - dbg("sur adapter: 64 %s high dword of base64(0x%x:%x) masked to 0\n", - res_type_str, temp_register2, (u32)base64); - base64 &= 0x00000000FFFFFFFFL; - } - - if (prefetchable) { - p_mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK; - p_mem_node->length = base; - dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n", - res_type_str, - p_mem_node->base, - p_mem_node->length); - - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } else { - mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK; - mem_node->length = base; - dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n", - res_type_str, - mem_node->base, - mem_node->length); - - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - cloop += 4; - break; - default: - dbg("asur: reserved BAR type=0x%x\n", - temp_register); - break; - } - } - } /* End of base register loop */ - } else { /* Some other unknown header type */ - dbg("Save_used_res of PCI unknown type b:d=0x%x:%x. skip.\n", - func->bus, func->device); - } - - /* find the next device in this slot */ - if (!disable) - break; - func = shpchp_slot_find(func->bus, func->device, index++); - } - - return 0; -} - -/** - * kfree_resource_list: release memory of all list members - * @res: resource list to free - */ -static inline void -return_resource_list(struct pci_resource **func, struct pci_resource **res) -{ - struct pci_resource *node; - struct pci_resource *t_node; - - node = *func; - *func = NULL; - while (node) { - t_node = node->next; - return_resource(res, node); - node = t_node; - } -} - -/* - * shpchp_return_board_resources - * - * this routine returns all resources allocated to a board to - * the available pool. - * - * returns 0 if success - */ -int shpchp_return_board_resources(struct pci_func * func, - struct resource_lists * resources) -{ - int rc; - dbg("%s\n", __FUNCTION__); - - if (!func) - return 1; - - return_resource_list(&(func->io_head),&(resources->io_head)); - return_resource_list(&(func->mem_head),&(resources->mem_head)); - return_resource_list(&(func->p_mem_head),&(resources->p_mem_head)); - return_resource_list(&(func->bus_head),&(resources->bus_head)); - - rc = shpchp_resource_sort_and_combine(&(resources->mem_head)); - rc |= shpchp_resource_sort_and_combine(&(resources->p_mem_head)); - rc |= shpchp_resource_sort_and_combine(&(resources->io_head)); - rc |= shpchp_resource_sort_and_combine(&(resources->bus_head)); - - return rc; -} - -/** - * kfree_resource_list: release memory of all list members - * @res: resource list to free - */ -static inline void -kfree_resource_list(struct pci_resource **r) -{ - struct pci_resource *res, *tres; - - res = *r; - *r = NULL; - - while (res) { - tres = res; - res = res->next; - kfree(tres); - } -} - -/** - * shpchp_destroy_resource_list: put node back in the resource list - * @resources: list to put nodes back - */ -void shpchp_destroy_resource_list(struct resource_lists *resources) -{ - kfree_resource_list(&(resources->io_head)); - kfree_resource_list(&(resources->mem_head)); - kfree_resource_list(&(resources->p_mem_head)); - kfree_resource_list(&(resources->bus_head)); -} - -/** - * shpchp_destroy_board_resources: put node back in the resource list - * @resources: list to put nodes back - */ -void shpchp_destroy_board_resources(struct pci_func * func) -{ - kfree_resource_list(&(func->io_head)); - kfree_resource_list(&(func->mem_head)); - kfree_resource_list(&(func->p_mem_head)); - kfree_resource_list(&(func->bus_head)); -} diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index c9445ebda5c7..b0e781dbcffb 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -40,43 +40,49 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, char *buf) { - struct pci_dev *pci_dev; - struct controller *ctrl; + struct pci_dev *pdev; char * out = buf; - int index; - struct pci_resource *res; + int index, busnr; + struct resource *res; + struct pci_bus *bus; - pci_dev = container_of (dev, struct pci_dev, dev); - ctrl = pci_get_drvdata(pci_dev); + pdev = container_of (dev, struct pci_dev, dev); + bus = pdev->subordinate; out += sprintf(buf, "Free resources: memory\n"); - index = 11; - res = ctrl->mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { + res = bus->resource[index]; + if (res && (res->flags & IORESOURCE_MEM) && + !(res->flags & IORESOURCE_PREFETCH)) { + out += sprintf(out, "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "Free resources: prefetchable memory\n"); - index = 11; - res = ctrl->p_mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { + res = bus->resource[index]; + if (res && (res->flags & IORESOURCE_MEM) && + (res->flags & IORESOURCE_PREFETCH)) { + out += sprintf(out, "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "Free resources: IO\n"); - index = 11; - res = ctrl->io_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { + res = bus->resource[index]; + if (res && (res->flags & IORESOURCE_IO)) { + out += sprintf(out, "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "Free resources: bus numbers\n"); - index = 11; - res = ctrl->bus_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (busnr = bus->secondary; busnr <= bus->subordinate; busnr++) { + if (!pci_find_bus(pci_domain_nr(bus), busnr)) + break; } + if (busnr < bus->subordinate) + out += sprintf(out, "start = %8.8x, length = %8.8x\n", + busnr, (bus->subordinate - busnr)); return out - buf; } @@ -84,16 +90,16 @@ static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL); static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf) { - struct pci_dev *pci_dev; + struct pci_dev *pdev, *fdev; struct controller *ctrl; char * out = buf; int index; - struct pci_resource *res; + struct resource *res; struct pci_func *new_slot; struct slot *slot; - pci_dev = container_of (dev, struct pci_dev, dev); - ctrl = pci_get_drvdata(pci_dev); + pdev = container_of (dev, struct pci_dev, dev); + ctrl = pci_get_drvdata(pdev); slot=ctrl->slot; @@ -101,34 +107,47 @@ static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char new_slot = shpchp_slot_find(slot->bus, slot->device, 0); if (!new_slot) break; + fdev = new_slot->pci_dev; + if (!fdev) + break; out += sprintf(out, "assigned resources: memory\n"); - index = 11; - res = new_slot->mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index=0; index <= PCI_NUM_RESOURCES; index++) { + res = &(fdev->resource[index]); + if (res && (res->flags & IORESOURCE_MEM) && + !(res->flags & IORESOURCE_PREFETCH)) { + out += sprintf(out, + "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "assigned resources: prefetchable memory\n"); - index = 11; - res = new_slot->p_mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index=0; index <= PCI_NUM_RESOURCES; index++) { + res = &(fdev->resource[index]); + if (res && (res->flags & (IORESOURCE_MEM | + IORESOURCE_PREFETCH))) { + out += sprintf(out, + "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "assigned resources: IO\n"); - index = 11; - res = new_slot->io_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index=0; index <= PCI_NUM_RESOURCES; index++) { + res = &(fdev->resource[index]); + if (res && (res->flags & IORESOURCE_IO)) { + out += sprintf(out, + "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "assigned resources: bus numbers\n"); - index = 11; - res = new_slot->bus_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; - } + if (fdev->subordinate) + out += sprintf(out, "start = %8.8x, length = %8.8x\n", + fdev->subordinate->secondary, + (fdev->subordinate->subordinate - + fdev->subordinate->secondary)); + else + out += sprintf(out, "start = %8.8x, length = %8.8x\n", + fdev->bus->number, 1); slot=slot->next; } diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h index 057b192ce589..df474b27d6e8 100644 --- a/drivers/pci/hotplug/shpchprm.h +++ b/drivers/pci/hotplug/shpchprm.h @@ -32,24 +32,12 @@ #ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY #include "shpchprm_legacy.h" -#else -#include "shpchprm_nonacpi.h" #endif int shpchprm_init(enum php_ctlr_type ct); void shpchprm_cleanup(void); -int shpchprm_print_pirt(void); -int shpchprm_find_available_resources(struct controller *ctrl); int shpchprm_set_hpp(struct controller *ctrl, struct pci_func *func, u8 card_type); void shpchprm_enable_card(struct controller *ctrl, struct pci_func *func, u8 card_type); int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum); -#ifdef DEBUG -#define RES_CHECK(this, bits) \ - { if (((this) & (bits - 1))) \ - printk("%s:%d ERR: potential res loss!\n", __FUNCTION__, __LINE__); } -#else -#define RES_CHECK(this, bits) -#endif - #endif /* _SHPCHPRM_H_ */ diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index d37b31658edf..3d2f9c5269c7 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -34,9 +34,6 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include #include #include @@ -75,10 +72,6 @@ struct acpi_php_slot { int dev; int fun; u32 sun; - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; void *slot_ops; /* _STA, _EJx, etc */ struct slot *slot; }; /* per func */ @@ -95,14 +88,6 @@ struct acpi_bridge { int bus; /* pdev->subordinate->number */ struct acpi__hpp *_hpp; struct acpi_php_slot *slots; - struct pci_resource *tmem_head; /* total from crs */ - struct pci_resource *tp_mem_head; /* total from crs */ - struct pci_resource *tio_head; /* total from crs */ - struct pci_resource *tbus_head; /* total from crs */ - struct pci_resource *mem_head; /* available */ - struct pci_resource *p_mem_head; /* available */ - struct pci_resource *io_head; /* available */ - struct pci_resource *bus_head; /* available */ int scanned; int type; }; @@ -252,485 +237,6 @@ static void acpi_run_oshp ( struct acpi_bridge *ab) return; } -static acpi_status acpi_evaluate_crs( - acpi_handle handle, - struct acpi_resource **retbuf - ) -{ - acpi_status status; - struct acpi_buffer crsbuf; - u8 *path_name = acpi_path_name(handle); - - crsbuf.length = 0; - crsbuf.pointer = NULL; - - status = acpi_get_current_resources (handle, &crsbuf); - - switch (status) { - case AE_BUFFER_OVERFLOW: - break; /* found */ - case AE_NOT_FOUND: - dbg("acpi_shpchprm:%s _CRS not found\n", path_name); - return status; - default: - err ("acpi_shpchprm:%s _CRS fail=0x%x\n", path_name, status); - return status; - } - - crsbuf.pointer = kmalloc (crsbuf.length, GFP_KERNEL); - if (!crsbuf.pointer) { - err ("acpi_shpchprm: alloc %ld bytes for %s _CRS fail\n", (ulong)crsbuf.length, path_name); - return AE_NO_MEMORY; - } - - status = acpi_get_current_resources (handle, &crsbuf); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm: %s _CRS fail=0x%x.\n", path_name, status); - kfree(crsbuf.pointer); - return status; - } - - *retbuf = crsbuf.pointer; - - return status; -} - -static void free_pci_resource ( struct pci_resource *aprh) -{ - struct pci_resource *res, *next; - - for (res = aprh; res; res = next) { - next = res->next; - kfree(res); - } -} - -static void print_pci_resource ( struct pci_resource *aprh) -{ - struct pci_resource *res; - - for (res = aprh; res; res = res->next) - dbg(" base= 0x%x length= 0x%x\n", res->base, res->length); -} - -static void print_slot_resources( struct acpi_php_slot *aps) -{ - if (aps->bus_head) { - dbg(" BUS Resources:\n"); - print_pci_resource (aps->bus_head); - } - - if (aps->io_head) { - dbg(" IO Resources:\n"); - print_pci_resource (aps->io_head); - } - - if (aps->mem_head) { - dbg(" MEM Resources:\n"); - print_pci_resource (aps->mem_head); - } - - if (aps->p_mem_head) { - dbg(" PMEM Resources:\n"); - print_pci_resource (aps->p_mem_head); - } -} - -static void print_pci_resources( struct acpi_bridge *ab) -{ - if (ab->tbus_head) { - dbg(" Total BUS Resources:\n"); - print_pci_resource (ab->tbus_head); - } - if (ab->bus_head) { - dbg(" BUS Resources:\n"); - print_pci_resource (ab->bus_head); - } - - if (ab->tio_head) { - dbg(" Total IO Resources:\n"); - print_pci_resource (ab->tio_head); - } - if (ab->io_head) { - dbg(" IO Resources:\n"); - print_pci_resource (ab->io_head); - } - - if (ab->tmem_head) { - dbg(" Total MEM Resources:\n"); - print_pci_resource (ab->tmem_head); - } - if (ab->mem_head) { - dbg(" MEM Resources:\n"); - print_pci_resource (ab->mem_head); - } - - if (ab->tp_mem_head) { - dbg(" Total PMEM Resources:\n"); - print_pci_resource (ab->tp_mem_head); - } - if (ab->p_mem_head) { - dbg(" PMEM Resources:\n"); - print_pci_resource (ab->p_mem_head); - } - if (ab->_hpp) { - dbg(" _HPP: cache_line_size=0x%x\n", ab->_hpp->cache_line_size); - dbg(" _HPP: latency timer =0x%x\n", ab->_hpp->latency_timer); - dbg(" _HPP: enable SERR =0x%x\n", ab->_hpp->enable_serr); - dbg(" _HPP: enable PERR =0x%x\n", ab->_hpp->enable_perr); - } -} - -static int shpchprm_delete_resource( - struct pci_resource **aprh, - ulong base, - ulong size) -{ - struct pci_resource *res; - struct pci_resource *prevnode; - struct pci_resource *split_node; - ulong tbase; - - shpchp_resource_sort_and_combine(aprh); - - for (res = *aprh; res; res = res->next) { - if (res->base > base) - continue; - - if ((res->base + res->length) < (base + size)) - continue; - - if (res->base < base) { - tbase = base; - - if ((res->length - (tbase - res->base)) < size) - continue; - - split_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base; - split_node->length = tbase - res->base; - res->base = tbase; - res->length -= split_node->length; - - split_node->next = res->next; - res->next = split_node; - } - - if (res->length >= size) { - split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base + size; - split_node->length = res->length - size; - res->length = size; - - split_node->next = res->next; - res->next = split_node; - } - - if (*aprh == res) { - *aprh = res->next; - } else { - prevnode = *aprh; - while (prevnode->next != res) - prevnode = prevnode->next; - - prevnode->next = res->next; - } - res->next = NULL; - kfree(res); - break; - } - - return 0; -} - -static int shpchprm_delete_resources( - struct pci_resource **aprh, - struct pci_resource *this - ) -{ - struct pci_resource *res; - - for (res = this; res; res = res->next) - shpchprm_delete_resource(aprh, res->base, res->length); - - return 0; -} - -static int shpchprm_add_resource( - struct pci_resource **aprh, - ulong base, - ulong size) -{ - struct pci_resource *res; - - for (res = *aprh; res; res = res->next) { - if ((res->base + res->length) == base) { - res->length += size; - size = 0L; - break; - } - if (res->next == *aprh) - break; - } - - if (size) { - res = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!res) { - err ("acpi_shpchprm: alloc for res fail\n"); - return -ENOMEM; - } - memset(res, 0, sizeof (struct pci_resource)); - - res->base = base; - res->length = size; - res->next = *aprh; - *aprh = res; - } - - return 0; -} - -static int shpchprm_add_resources( - struct pci_resource **aprh, - struct pci_resource *this - ) -{ - struct pci_resource *res; - int rc = 0; - - for (res = this; res && !rc; res = res->next) - rc = shpchprm_add_resource(aprh, res->base, res->length); - - return rc; -} - -static void acpi_parse_io ( - struct acpi_bridge *ab, - union acpi_resource_data *data - ) -{ - struct acpi_resource_io *dataio; - dataio = (struct acpi_resource_io *) data; - - dbg("Io Resource\n"); - dbg(" %d bit decode\n", ACPI_DECODE_16 == dataio->io_decode ? 16:10); - dbg(" Range minimum base: %08X\n", dataio->min_base_address); - dbg(" Range maximum base: %08X\n", dataio->max_base_address); - dbg(" Alignment: %08X\n", dataio->alignment); - dbg(" Range Length: %08X\n", dataio->range_length); -} - -static void acpi_parse_fixed_io ( - struct acpi_bridge *ab, - union acpi_resource_data *data - ) -{ - struct acpi_resource_fixed_io *datafio; - datafio = (struct acpi_resource_fixed_io *) data; - - dbg("Fixed Io Resource\n"); - dbg(" Range base address: %08X", datafio->base_address); - dbg(" Range length: %08X", datafio->range_length); -} - -static void acpi_parse_address16_32 ( - struct acpi_bridge *ab, - union acpi_resource_data *data, - acpi_resource_type id - ) -{ - /* - * acpi_resource_address16 == acpi_resource_address32 - * acpi_resource_address16 *data16 = (acpi_resource_address16 *) data; - */ - struct acpi_resource_address32 *data32 = (struct acpi_resource_address32 *) data; - struct pci_resource **aprh, **tprh; - - if (id == ACPI_RSTYPE_ADDRESS16) - dbg("acpi_shpchprm:16-Bit Address Space Resource\n"); - else - dbg("acpi_shpchprm:32-Bit Address Space Resource\n"); - - switch (data32->resource_type) { - case ACPI_MEMORY_RANGE: - dbg(" Resource Type: Memory Range\n"); - aprh = &ab->mem_head; - tprh = &ab->tmem_head; - - switch (data32->attribute.memory.cache_attribute) { - case ACPI_NON_CACHEABLE_MEMORY: - dbg(" Type Specific: Noncacheable memory\n"); - break; - case ACPI_CACHABLE_MEMORY: - dbg(" Type Specific: Cacheable memory\n"); - break; - case ACPI_WRITE_COMBINING_MEMORY: - dbg(" Type Specific: Write-combining memory\n"); - break; - case ACPI_PREFETCHABLE_MEMORY: - aprh = &ab->p_mem_head; - dbg(" Type Specific: Prefetchable memory\n"); - break; - default: - dbg(" Type Specific: Invalid cache attribute\n"); - break; - } - - dbg(" Type Specific: Read%s\n", ACPI_READ_WRITE_MEMORY == data32->attribute.memory.read_write_attribute ? "/Write":" Only"); - break; - - case ACPI_IO_RANGE: - dbg(" Resource Type: I/O Range\n"); - aprh = &ab->io_head; - tprh = &ab->tio_head; - - switch (data32->attribute.io.range_attribute) { - case ACPI_NON_ISA_ONLY_RANGES: - dbg(" Type Specific: Non-ISA Io Addresses\n"); - break; - case ACPI_ISA_ONLY_RANGES: - dbg(" Type Specific: ISA Io Addresses\n"); - break; - case ACPI_ENTIRE_RANGE: - dbg(" Type Specific: ISA and non-ISA Io Addresses\n"); - break; - default: - dbg(" Type Specific: Invalid range attribute\n"); - break; - } - break; - - case ACPI_BUS_NUMBER_RANGE: - dbg(" Resource Type: Bus Number Range(fixed)\n"); - /* fixup to be compatible with the rest of php driver */ - data32->min_address_range++; - data32->address_length--; - aprh = &ab->bus_head; - tprh = &ab->tbus_head; - break; - default: - dbg(" Resource Type: Invalid resource type. Exiting.\n"); - return; - } - - dbg(" Resource %s\n", ACPI_CONSUMER == data32->producer_consumer ? "Consumer":"Producer"); - dbg(" %s decode\n", ACPI_SUB_DECODE == data32->decode ? "Subtractive":"Positive"); - dbg(" Min address is %s fixed\n", ACPI_ADDRESS_FIXED == data32->min_address_fixed ? "":"not"); - dbg(" Max address is %s fixed\n", ACPI_ADDRESS_FIXED == data32->max_address_fixed ? "":"not"); - dbg(" Granularity: %08X\n", data32->granularity); - dbg(" Address range min: %08X\n", data32->min_address_range); - dbg(" Address range max: %08X\n", data32->max_address_range); - dbg(" Address translation offset: %08X\n", data32->address_translation_offset); - dbg(" Address Length: %08X\n", data32->address_length); - - if (0xFF != data32->resource_source.index) { - dbg(" Resource Source Index: %X\n", data32->resource_source.index); - /* dbg(" Resource Source: %s\n", data32->resource_source.string_ptr); */ - } - - shpchprm_add_resource(aprh, data32->min_address_range, data32->address_length); -} - -static acpi_status acpi_parse_crs( - struct acpi_bridge *ab, - struct acpi_resource *crsbuf - ) -{ - acpi_status status = AE_OK; - struct acpi_resource *resource = crsbuf; - u8 count = 0; - u8 done = 0; - - while (!done) { - dbg("acpi_shpchprm: PCI bus 0x%x Resource structure %x.\n", ab->bus, count++); - switch (resource->id) { - case ACPI_RSTYPE_IRQ: - dbg("Irq -------- Resource\n"); - break; - case ACPI_RSTYPE_DMA: - dbg("DMA -------- Resource\n"); - break; - case ACPI_RSTYPE_START_DPF: - dbg("Start DPF -------- Resource\n"); - break; - case ACPI_RSTYPE_END_DPF: - dbg("End DPF -------- Resource\n"); - break; - case ACPI_RSTYPE_IO: - acpi_parse_io (ab, &resource->data); - break; - case ACPI_RSTYPE_FIXED_IO: - acpi_parse_fixed_io (ab, &resource->data); - break; - case ACPI_RSTYPE_VENDOR: - dbg("Vendor -------- Resource\n"); - break; - case ACPI_RSTYPE_END_TAG: - dbg("End_tag -------- Resource\n"); - done = 1; - break; - case ACPI_RSTYPE_MEM24: - dbg("Mem24 -------- Resource\n"); - break; - case ACPI_RSTYPE_MEM32: - dbg("Mem32 -------- Resource\n"); - break; - case ACPI_RSTYPE_FIXED_MEM32: - dbg("Fixed Mem32 -------- Resource\n"); - break; - case ACPI_RSTYPE_ADDRESS16: - acpi_parse_address16_32(ab, &resource->data, ACPI_RSTYPE_ADDRESS16); - break; - case ACPI_RSTYPE_ADDRESS32: - acpi_parse_address16_32(ab, &resource->data, ACPI_RSTYPE_ADDRESS32); - break; - case ACPI_RSTYPE_ADDRESS64: - info("Address64 -------- Resource unparsed\n"); - break; - case ACPI_RSTYPE_EXT_IRQ: - dbg("Ext Irq -------- Resource\n"); - break; - default: - dbg("Invalid -------- resource type 0x%x\n", resource->id); - break; - } - - resource = (struct acpi_resource *) ((char *)resource + resource->length); - } - - return status; -} - -static acpi_status acpi_get_crs( struct acpi_bridge *ab) -{ - acpi_status status; - struct acpi_resource *crsbuf; - - status = acpi_evaluate_crs(ab->handle, &crsbuf); - if (ACPI_SUCCESS(status)) { - status = acpi_parse_crs(ab, crsbuf); - kfree(crsbuf); - - shpchp_resource_sort_and_combine(&ab->bus_head); - shpchp_resource_sort_and_combine(&ab->io_head); - shpchp_resource_sort_and_combine(&ab->mem_head); - shpchp_resource_sort_and_combine(&ab->p_mem_head); - - shpchprm_add_resources (&ab->tbus_head, ab->bus_head); - shpchprm_add_resources (&ab->tio_head, ab->io_head); - shpchprm_add_resources (&ab->tmem_head, ab->mem_head); - shpchprm_add_resources (&ab->tp_mem_head, ab->p_mem_head); - } - - return status; -} - /* find acpi_bridge downword from ab. */ static struct acpi_bridge * find_acpi_bridge_by_bus( @@ -1047,13 +553,6 @@ static struct acpi_bridge * add_host_bridge( ab->scanned = 0; ab->type = BRIDGE_TYPE_HOST; - /* get root pci bridge's current resources */ - status = acpi_get_crs(ab); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s evaluate _CRS fail=0x%x\n", path_name, status); - kfree(ab); - return NULL; - } build_a_bridge(ab, ab); return ab; @@ -1147,11 +646,6 @@ static void free_a_slot(struct acpi_php_slot *aps) { dbg(" free a php func of slot(0x%02x) on PCI b:d:f=0x%02x:%02x:%02x\n", aps->sun, aps->bus, aps->dev, aps->fun); - free_pci_resource (aps->io_head); - free_pci_resource (aps->bus_head); - free_pci_resource (aps->mem_head); - free_pci_resource (aps->p_mem_head); - kfree(aps); } @@ -1176,15 +670,6 @@ static void free_a_bridge( struct acpi_bridge *ab) free_a_slot(aps); } - free_pci_resource (ab->io_head); - free_pci_resource (ab->tio_head); - free_pci_resource (ab->bus_head); - free_pci_resource (ab->tbus_head); - free_pci_resource (ab->mem_head); - free_pci_resource (ab->tmem_head); - free_pci_resource (ab->p_mem_head); - free_pci_resource (ab->tp_mem_head); - kfree(ab); } @@ -1234,47 +719,6 @@ static int get_number_of_slots ( return slot_num; } -static int print_acpi_resources (struct acpi_bridge *ab) -{ - struct acpi_php_slot *aps; - int i; - - switch (ab->type) { - case BRIDGE_TYPE_HOST: - dbg("PCI HOST Bridge (%x) [%s]\n", ab->bus, acpi_path_name(ab->handle)); - break; - case BRIDGE_TYPE_P2P: - dbg("PCI P2P Bridge (%x-%x) [%s]\n", ab->pbus, ab->bus, acpi_path_name(ab->handle)); - break; - }; - - print_pci_resources (ab); - - for ( i = -1, aps = ab->slots; aps; aps = aps->next) { - if (aps->dev == i) - continue; - dbg(" Slot sun(%x) s:b:d:f(%02x:%02x:%02x:%02x)\n", aps->sun, aps->seg, aps->bus, aps->dev, aps->fun); - print_slot_resources(aps); - i = aps->dev; - } - - if (ab->child) - print_acpi_resources (ab->child); - - if (ab->next) - print_acpi_resources (ab->next); - - return 0; -} - -int shpchprm_print_pirt(void) -{ - dbg("SHPCHPRM ACPI Slots\n"); - if (acpi_bridges_head) - print_acpi_resources (acpi_bridges_head); - return 0; -} - static struct acpi_php_slot * get_acpi_slot ( struct acpi_bridge *ab, u32 sun @@ -1302,265 +746,6 @@ static struct acpi_php_slot * get_acpi_slot ( } -#if 0 -static void * shpchprm_get_slot(struct slot *slot) -{ - struct acpi_bridge *ab = acpi_bridges_head; - struct acpi_php_slot *aps = get_acpi_slot (ab, slot->number); - - aps->slot = slot; - - dbg("Got acpi slot sun(%x): s:b:d:f(%x:%x:%x:%x)\n", aps->sun, aps->seg, aps->bus, aps->dev, aps->fun); - - return (void *)aps; -} -#endif - -static void shpchprm_dump_func_res( struct pci_func *fun) -{ - struct pci_func *func = fun; - - if (func->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (func->bus_head); - } - if (func->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (func->io_head); - } - if (func->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (func->mem_head); - } - if (func->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (func->p_mem_head); - } -} - -static void shpchprm_dump_ctrl_res( struct controller *ctlr) -{ - struct controller *ctrl = ctlr; - - if (ctrl->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (ctrl->bus_head); - } - if (ctrl->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (ctrl->io_head); - } - if (ctrl->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (ctrl->mem_head); - } - if (ctrl->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (ctrl->p_mem_head); - } -} - -static int shpchprm_get_used_resources ( - struct controller *ctrl, - struct pci_func *func - ) -{ - return shpchp_save_used_resources (ctrl, func, !DISABLE_CARD); -} - -static int configure_existing_function( - struct controller *ctrl, - struct pci_func *func - ) -{ - int rc; - - /* see how much resources the func has used. */ - rc = shpchprm_get_used_resources (ctrl, func); - - if (!rc) { - /* subtract the resources used by the func from ctrl resources */ - rc = shpchprm_delete_resources (&ctrl->bus_head, func->bus_head); - rc |= shpchprm_delete_resources (&ctrl->io_head, func->io_head); - rc |= shpchprm_delete_resources (&ctrl->mem_head, func->mem_head); - rc |= shpchprm_delete_resources (&ctrl->p_mem_head, func->p_mem_head); - if (rc) - warn("aCEF: cannot del used resources\n"); - } else - err("aCEF: cannot get used resources\n"); - - return rc; -} - -static int bind_pci_resources_to_slots ( struct controller *ctrl) -{ - struct pci_func *func, new_func; - int busn = ctrl->slot_bus; - int devn, funn; - u32 vid; - - for (devn = 0; devn < 32; devn++) { - for (funn = 0; funn < 8; funn++) { - /* - if (devn == ctrl->device && funn == ctrl->function) - continue; - */ - /* find out if this entry is for an occupied slot */ - vid = 0xFFFFFFFF; - pci_bus_read_config_dword(ctrl->pci_dev->subordinate, PCI_DEVFN(devn, funn), PCI_VENDOR_ID, &vid); - - if (vid != 0xFFFFFFFF) { - func = shpchp_slot_find(busn, devn, funn); - if (!func) { - memset(&new_func, 0, sizeof(struct pci_func)); - new_func.bus = busn; - new_func.device = devn; - new_func.function = funn; - new_func.is_a_board = 1; - configure_existing_function(ctrl, &new_func); - shpchprm_dump_func_res(&new_func); - } else { - configure_existing_function(ctrl, func); - shpchprm_dump_func_res(func); - } - dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus); - } - } - } - - return 0; -} - -static int bind_pci_resources( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int status = 0; - - if (ab->bus_head) { - dbg("bapr: BUS Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->bus_head, ab->bus_head); - if (shpchprm_delete_resources (&ab->bus_head, ctrl->bus_head)) - warn("bapr: cannot sub BUS Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: BUS Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No BUS Resource on PCI 0x%x.\n", ab->bus); - - if (ab->io_head) { - dbg("bapr: IO Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->io_head, ab->io_head); - if (shpchprm_delete_resources (&ab->io_head, ctrl->io_head)) - warn("bapr: cannot sub IO Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: IO Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No IO Resource on PCI 0x%x.\n", ab->bus); - - if (ab->mem_head) { - dbg("bapr: MEM Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->mem_head, ab->mem_head); - if (shpchprm_delete_resources (&ab->mem_head, ctrl->mem_head)) - warn("bapr: cannot sub MEM Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: MEM Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No MEM Resource on PCI 0x%x.\n", ab->bus); - - if (ab->p_mem_head) { - dbg("bapr: PMEM Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->p_mem_head, ab->p_mem_head); - if (shpchprm_delete_resources (&ab->p_mem_head, ctrl->p_mem_head)) - warn("bapr: cannot sub PMEM Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: PMEM Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No PMEM Resource on PCI 0x%x.\n", ab->bus); - - return status; -} - -static int no_pci_resources( struct acpi_bridge *ab) -{ - return !(ab->p_mem_head || ab->mem_head || ab->io_head || ab->bus_head); -} - -static int find_pci_bridge_resources ( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int rc = 0; - struct pci_func func; - - memset(&func, 0, sizeof(struct pci_func)); - - func.bus = ab->pbus; - func.device = ab->pdevice; - func.function = ab->pfunction; - func.is_a_board = 1; - - /* Get used resources for this PCI bridge */ - rc = shpchp_save_used_resources (ctrl, &func, !DISABLE_CARD); - - ab->io_head = func.io_head; - ab->mem_head = func.mem_head; - ab->p_mem_head = func.p_mem_head; - ab->bus_head = func.bus_head; - if (ab->bus_head) - shpchprm_delete_resource(&ab->bus_head, ctrl->bus, 1); - - return rc; -} - -static int get_pci_resources_from_bridge( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int rc = 0; - - dbg("grfb: Get Resources for PCI 0x%x from actual PCI bridge 0x%x.\n", ctrl->bus, ab->bus); - - rc = find_pci_bridge_resources (ctrl, ab); - - shpchp_resource_sort_and_combine(&ab->bus_head); - shpchp_resource_sort_and_combine(&ab->io_head); - shpchp_resource_sort_and_combine(&ab->mem_head); - shpchp_resource_sort_and_combine(&ab->p_mem_head); - - shpchprm_add_resources (&ab->tbus_head, ab->bus_head); - shpchprm_add_resources (&ab->tio_head, ab->io_head); - shpchprm_add_resources (&ab->tmem_head, ab->mem_head); - shpchprm_add_resources (&ab->tp_mem_head, ab->p_mem_head); - - return rc; -} - -static int get_pci_resources( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int rc = 0; - - if (no_pci_resources(ab)) { - dbg("spbr:PCI 0x%x has no resources. Get parent resources.\n", ab->bus); - rc = get_pci_resources_from_bridge(ctrl, ab); - } - - return rc; -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -1570,42 +755,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -/* - * Get resources for this ctrl. - * 1. get total resources from ACPI _CRS or bridge (this ctrl) - * 2. find used resources of existing adapters - * 3. subtract used resources from total resources - */ -int shpchprm_find_available_resources( struct controller *ctrl) -{ - int rc = 0; - struct acpi_bridge *ab; - - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->pci_dev->subordinate->number); - if (!ab) { - err("pfar:cannot locate acpi bridge of PCI 0x%x.\n", ctrl->pci_dev->subordinate->number); - return -1; - } - if (no_pci_resources(ab)) { - rc = get_pci_resources(ctrl, ab); - if (rc) { - err("pfar:cannot get pci resources of PCI 0x%x.\n",ctrl->pci_dev->subordinate->number); - return -1; - } - } - - rc = bind_pci_resources(ctrl, ab); - dbg("pfar:pre-Bind PCI 0x%x Ctrl Resource Dump\n", ctrl->pci_dev->subordinate->number); - shpchprm_dump_ctrl_res(ctrl); - - bind_pci_resources_to_slots (ctrl); - - dbg("pfar:post-Bind PCI 0x%x Ctrl Resource Dump\n", ctrl->pci_dev->subordinate->number); - shpchprm_dump_ctrl_res(ctrl); - - return rc; -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index ba6c549c9b9d..6c27debe9522 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -34,25 +34,11 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include "shpchp.h" #include "shpchprm.h" -#include "shpchprm_legacy.h" - -static void __iomem *shpchp_rom_start; -static u16 unused_IRQ; void shpchprm_cleanup(void) { - if (shpchp_rom_start) - iounmap(shpchp_rom_start); -} - -int shpchprm_print_pirt(void) -{ - return 0; } int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) @@ -63,280 +49,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -/* Find the Hot Plug Resource Table in the specified region of memory */ -static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end) -{ - void __iomem *fp; - void __iomem *endp; - u8 temp1, temp2, temp3, temp4; - int status = 0; - - endp = (end - sizeof(struct hrt) + 1); - - for (fp = begin; fp <= endp; fp += 16) { - temp1 = readb(fp + SIG0); - temp2 = readb(fp + SIG1); - temp3 = readb(fp + SIG2); - temp4 = readb(fp + SIG3); - if (temp1 == '$' && temp2 == 'H' && temp3 == 'R' && temp4 == 'T') { - status = 1; - break; - } - } - - if (!status) - fp = NULL; - - dbg("Discovered Hotplug Resource Table at %p\n", fp); - return fp; -} - -/* - * shpchprm_find_available_resources - * - * Finds available memory, IO, and IRQ resources for programming - * devices which may be added to the system - * this function is for hot plug ADD! - * - * returns 0 if success - */ -int shpchprm_find_available_resources(struct controller *ctrl) -{ - u8 populated_slot; - u8 bridged_slot; - void __iomem *one_slot; - struct pci_func *func = NULL; - int i = 10, index = 0; - u32 temp_dword, rc; - ulong temp_ulong; - struct pci_resource *mem_node; - struct pci_resource *p_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - void __iomem *rom_resource_table; - struct pci_bus lpci_bus, *pci_bus; - u8 cfgspc_irq, temp; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - rom_resource_table = detect_HRT_floating_pointer(shpchp_rom_start, shpchp_rom_start + 0xffff); - dbg("rom_resource_table = %p\n", rom_resource_table); - if (rom_resource_table == NULL) - return -ENODEV; - - /* Sum all resources and setup resource maps */ - unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); - dbg("unused_IRQ = %x\n", unused_IRQ); - - temp = 0; - while (unused_IRQ) { - if (unused_IRQ & 1) { - shpchp_disk_irq = temp; - break; - } - unused_IRQ = unused_IRQ >> 1; - temp++; - } - - dbg("shpchp_disk_irq= %d\n", shpchp_disk_irq); - unused_IRQ = unused_IRQ >> 1; - temp++; - - while (unused_IRQ) { - if (unused_IRQ & 1) { - shpchp_nic_irq = temp; - break; - } - unused_IRQ = unused_IRQ >> 1; - temp++; - } - - dbg("shpchp_nic_irq= %d\n", shpchp_nic_irq); - unused_IRQ = readl(rom_resource_table + PCIIRQ); - - temp = 0; - - pci_read_config_byte(ctrl->pci_dev, PCI_INTERRUPT_LINE, &cfgspc_irq); - - if (!shpchp_nic_irq) { - shpchp_nic_irq = cfgspc_irq; - } - - if (!shpchp_disk_irq) { - shpchp_disk_irq = cfgspc_irq; - } - - dbg("shpchp_disk_irq, shpchp_nic_irq= %d, %d\n", shpchp_disk_irq, shpchp_nic_irq); - - one_slot = rom_resource_table + sizeof(struct hrt); - - i = readb(rom_resource_table + NUMBER_OF_ENTRIES); - dbg("number_of_entries = %d\n", i); - - if (!readb(one_slot + SECONDARY_BUS)) - return (1); - - dbg("dev|IO base|length|MEMbase|length|PM base|length|PB SB MB\n"); - - while (i && readb(one_slot + SECONDARY_BUS)) { - u8 dev_func = readb(one_slot + DEV_FUNC); - u8 primary_bus = readb(one_slot + PRIMARY_BUS); - u8 secondary_bus = readb(one_slot + SECONDARY_BUS); - u8 max_bus = readb(one_slot + MAX_BUS); - u16 io_base = readw(one_slot + IO_BASE); - u16 io_length = readw(one_slot + IO_LENGTH); - u16 mem_base = readw(one_slot + MEM_BASE); - u16 mem_length = readw(one_slot + MEM_LENGTH); - u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE); - u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH); - - dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n", - dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, - primary_bus, secondary_bus, max_bus); - - /* If this entry isn't for our controller's bus, ignore it */ - if (primary_bus != ctrl->slot_bus) { - i--; - one_slot += sizeof(struct slot_rt); - continue; - } - /* find out if this entry is for an occupied slot */ - temp_dword = 0xFFFFFFFF; - pci_bus->number = primary_bus; - pci_bus_read_config_dword(pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); - - dbg("temp_D_word = %x\n", temp_dword); - - if (temp_dword != 0xFFFFFFFF) { - index = 0; - func = shpchp_slot_find(primary_bus, dev_func >> 3, 0); - - while (func && (func->function != (dev_func & 0x07))) { - dbg("func = %p b:d:f(%x:%x:%x)\n", func, primary_bus, dev_func >> 3, index); - func = shpchp_slot_find(primary_bus, dev_func >> 3, index++); - } - - /* If we can't find a match, skip this table entry */ - if (!func) { - i--; - one_slot += sizeof(struct slot_rt); - continue; - } - /* this may not work and shouldn't be used */ - if (secondary_bus != primary_bus) - bridged_slot = 1; - else - bridged_slot = 0; - - populated_slot = 1; - } else { - populated_slot = 0; - bridged_slot = 0; - } - dbg("slot populated =%s \n", populated_slot?"yes":"no"); - - /* If we've got a valid IO base, use it */ - - temp_ulong = io_base + io_length; - - if ((io_base) && (temp_ulong <= 0x10000)) { - io_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)io_base; - io_node->length = (ulong)io_length; - dbg("found io_node(base, length) = %x, %x\n", io_node->base, io_node->length); - - if (!populated_slot) { - io_node->next = ctrl->io_head; - ctrl->io_head = io_node; - } else { - io_node->next = func->io_head; - func->io_head = io_node; - } - } - - /* If we've got a valid memory base, use it */ - temp_ulong = mem_base + mem_length; - if ((mem_base) && (temp_ulong <= 0x10000)) { - mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!mem_node) - return -ENOMEM; - - mem_node->base = (ulong)mem_base << 16; - mem_node->length = (ulong)(mem_length << 16); - dbg("found mem_node(base, length) = %x, %x\n", mem_node->base, mem_node->length); - - if (!populated_slot) { - mem_node->next = ctrl->mem_head; - ctrl->mem_head = mem_node; - } else { - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - } - - /* - * If we've got a valid prefetchable memory base, and - * the base + length isn't greater than 0xFFFF - */ - temp_ulong = pre_mem_base + pre_mem_length; - if ((pre_mem_base) && (temp_ulong <= 0x10000)) { - p_mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!p_mem_node) - return -ENOMEM; - - p_mem_node->base = (ulong)pre_mem_base << 16; - p_mem_node->length = (ulong)pre_mem_length << 16; - dbg("found p_mem_node(base, length) = %x, %x\n", p_mem_node->base, p_mem_node->length); - - if (!populated_slot) { - p_mem_node->next = ctrl->p_mem_head; - ctrl->p_mem_head = p_mem_node; - } else { - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } - } - - /* - * If we've got a valid bus number, use it - * The second condition is to ignore bus numbers on - * populated slots that don't have PCI-PCI bridges - */ - if (secondary_bus && (secondary_bus != primary_bus)) { - bus_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!bus_node) - return -ENOMEM; - - bus_node->base = (ulong)secondary_bus; - bus_node->length = (ulong)(max_bus - secondary_bus + 1); - dbg("found bus_node(base, length) = %x, %x\n", bus_node->base, bus_node->length); - - if (!populated_slot) { - bus_node->next = ctrl->bus_head; - ctrl->bus_head = bus_node; - } else { - bus_node->next = func->bus_head; - func->bus_head = bus_node; - } - } - - i--; - one_slot += sizeof(struct slot_rt); - } - - /* If all of the following fail, we don't have any resources for hot plug add */ - rc = 1; - rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - return (rc); -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, @@ -413,12 +125,6 @@ void shpchprm_enable_card( static int legacy_shpchprm_init_pci(void) { - shpchp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); - if (!shpchp_rom_start) { - err("Could not ioremap memory region for ROM\n"); - return -EIO; - } - return 0; } diff --git a/drivers/pci/hotplug/shpchprm_legacy.h b/drivers/pci/hotplug/shpchprm_legacy.h deleted file mode 100644 index 21bda74ddfa5..000000000000 --- a/drivers/pci/hotplug/shpchprm_legacy.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform using HRT - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * Copyright (C) 2003-2004 Intel Corporation - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to , - * - */ - -#ifndef _SHPCHPRM_LEGACY_H_ -#define _SHPCHPRM_LEGACY_H_ - -#define ROM_PHY_ADDR 0x0F0000 -#define ROM_PHY_LEN 0x00FFFF - -struct slot_rt { - u8 dev_func; - u8 primary_bus; - u8 secondary_bus; - u8 max_bus; - u16 io_base; - u16 io_length; - u16 mem_base; - u16 mem_length; - u16 pre_mem_base; - u16 pre_mem_length; -} __attribute__ ((packed)); - -/* offsets to the hotplug slot resource table registers based on the above structure layout */ -enum slot_rt_offsets { - DEV_FUNC = offsetof(struct slot_rt, dev_func), - PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), - SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus), - MAX_BUS = offsetof(struct slot_rt, max_bus), - IO_BASE = offsetof(struct slot_rt, io_base), - IO_LENGTH = offsetof(struct slot_rt, io_length), - MEM_BASE = offsetof(struct slot_rt, mem_base), - MEM_LENGTH = offsetof(struct slot_rt, mem_length), - PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base), - PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length), -}; - -struct hrt { - char sig0; - char sig1; - char sig2; - char sig3; - u16 unused_IRQ; - u16 PCIIRQ; - u8 number_of_entries; - u8 revision; - u16 reserved1; - u32 reserved2; -} __attribute__ ((packed)); - -/* offsets to the hotplug resource table registers based on the above structure layout */ -enum hrt_offsets { - SIG0 = offsetof(struct hrt, sig0), - SIG1 = offsetof(struct hrt, sig1), - SIG2 = offsetof(struct hrt, sig2), - SIG3 = offsetof(struct hrt, sig3), - UNUSED_IRQ = offsetof(struct hrt, unused_IRQ), - PCIIRQ = offsetof(struct hrt, PCIIRQ), - NUMBER_OF_ENTRIES = offsetof(struct hrt, number_of_entries), - REVISION = offsetof(struct hrt, revision), - HRT_RESERVED1 = offsetof(struct hrt, reserved1), - HRT_RESERVED2 = offsetof(struct hrt, reserved2), -}; - -struct irq_info { - u8 bus, devfn; /* bus, device and function */ - struct { - u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ - u16 bitmap; /* Available IRQs */ - } __attribute__ ((packed)) irq[4]; - u8 slot; /* slot number, 0=onboard */ - u8 rfu; -} __attribute__ ((packed)); - -struct irq_routing_table { - u32 signature; /* PIRQ_SIGNATURE should be here */ - u16 version; /* PIRQ_VERSION */ - u16 size; /* Table size in bytes */ - u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ - u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ - u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ - u32 miniport_data; /* Crap */ - u8 rfu[11]; - u8 checksum; /* Modulo 256 checksum must give zero */ - struct irq_info slots[0]; -} __attribute__ ((packed)); - -#endif /* _SHPCHPRM_LEGACY_H_ */ diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index 5f75ef7f3df2..9d4ccae5f78e 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -34,23 +34,14 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include "shpchp.h" #include "shpchprm.h" -#include "shpchprm_nonacpi.h" void shpchprm_cleanup(void) { return; } -int shpchprm_print_pirt(void) -{ - return 0; -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -60,275 +51,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -static void print_pci_resource ( struct pci_resource *aprh) -{ - struct pci_resource *res; - - for (res = aprh; res; res = res->next) - dbg(" base= 0x%x length= 0x%x\n", res->base, res->length); -} - - -static void phprm_dump_func_res( struct pci_func *fun) -{ - struct pci_func *func = fun; - - if (func->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (func->bus_head); - } - if (func->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (func->io_head); - } - if (func->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (func->mem_head); - } - if (func->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (func->p_mem_head); - } -} - -static int phprm_get_used_resources ( - struct controller *ctrl, - struct pci_func *func - ) -{ - return shpchp_save_used_resources (ctrl, func, !DISABLE_CARD); -} - -static int phprm_delete_resource( - struct pci_resource **aprh, - ulong base, - ulong size) -{ - struct pci_resource *res; - struct pci_resource *prevnode; - struct pci_resource *split_node; - ulong tbase; - - shpchp_resource_sort_and_combine(aprh); - - for (res = *aprh; res; res = res->next) { - if (res->base > base) - continue; - - if ((res->base + res->length) < (base + size)) - continue; - - if (res->base < base) { - tbase = base; - - if ((res->length - (tbase - res->base)) < size) - continue; - - split_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base; - split_node->length = tbase - res->base; - res->base = tbase; - res->length -= split_node->length; - - split_node->next = res->next; - res->next = split_node; - } - - if (res->length >= size) { - split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base + size; - split_node->length = res->length - size; - res->length = size; - - split_node->next = res->next; - res->next = split_node; - } - - if (*aprh == res) { - *aprh = res->next; - } else { - prevnode = *aprh; - while (prevnode->next != res) - prevnode = prevnode->next; - - prevnode->next = res->next; - } - res->next = NULL; - kfree(res); - break; - } - - return 0; -} - - -static int phprm_delete_resources( - struct pci_resource **aprh, - struct pci_resource *this - ) -{ - struct pci_resource *res; - - for (res = this; res; res = res->next) - phprm_delete_resource(aprh, res->base, res->length); - - return 0; -} - - -static int configure_existing_function( - struct controller *ctrl, - struct pci_func *func - ) -{ - int rc; - - /* see how much resources the func has used. */ - rc = phprm_get_used_resources (ctrl, func); - - if (!rc) { - /* subtract the resources used by the func from ctrl resources */ - rc = phprm_delete_resources (&ctrl->bus_head, func->bus_head); - rc |= phprm_delete_resources (&ctrl->io_head, func->io_head); - rc |= phprm_delete_resources (&ctrl->mem_head, func->mem_head); - rc |= phprm_delete_resources (&ctrl->p_mem_head, func->p_mem_head); - if (rc) - warn("aCEF: cannot del used resources\n"); - } else - err("aCEF: cannot get used resources\n"); - - return rc; -} - -static int bind_pci_resources_to_slots ( struct controller *ctrl) -{ - struct pci_func *func, new_func; - int busn = ctrl->slot_bus; - int devn, funn; - u32 vid; - - for (devn = 0; devn < 32; devn++) { - for (funn = 0; funn < 8; funn++) { - /* - if (devn == ctrl->device && funn == ctrl->function) - continue; - */ - /* find out if this entry is for an occupied slot */ - vid = 0xFFFFFFFF; - - pci_bus_read_config_dword(ctrl->pci_dev->subordinate, PCI_DEVFN(devn, funn), PCI_VENDOR_ID, &vid); - - if (vid != 0xFFFFFFFF) { - func = shpchp_slot_find(busn, devn, funn); - if (!func) { - memset(&new_func, 0, sizeof(struct pci_func)); - new_func.bus = busn; - new_func.device = devn; - new_func.function = funn; - new_func.is_a_board = 1; - configure_existing_function(ctrl, &new_func); - phprm_dump_func_res(&new_func); - } else { - configure_existing_function(ctrl, func); - phprm_dump_func_res(func); - } - dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus); - } - } - } - - return 0; -} - -static void phprm_dump_ctrl_res( struct controller *ctlr) -{ - struct controller *ctrl = ctlr; - - if (ctrl->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (ctrl->bus_head); - } - if (ctrl->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (ctrl->io_head); - } - if (ctrl->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (ctrl->mem_head); - } - if (ctrl->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (ctrl->p_mem_head); - } -} - -/* - * phprm_find_available_resources - * - * Finds available memory, IO, and IRQ resources for programming - * devices which may be added to the system - * this function is for hot plug ADD! - * - * returns 0 if success - */ -int shpchprm_find_available_resources(struct controller *ctrl) -{ - struct pci_func func; - u32 rc; - - memset(&func, 0, sizeof(struct pci_func)); - - func.bus = ctrl->bus; - func.device = ctrl->device; - func.function = ctrl->function; - func.is_a_board = 1; - - /* Get resources for this PCI bridge */ - rc = shpchp_save_used_resources (ctrl, &func, !DISABLE_CARD); - dbg("%s: shpchp_save_used_resources rc = %d\n", __FUNCTION__, rc); - - if (func.mem_head) - func.mem_head->next = ctrl->mem_head; - ctrl->mem_head = func.mem_head; - - if (func.p_mem_head) - func.p_mem_head->next = ctrl->p_mem_head; - ctrl->p_mem_head = func.p_mem_head; - - if (func.io_head) - func.io_head->next = ctrl->io_head; - ctrl->io_head = func.io_head; - - if(func.bus_head) - func.bus_head->next = ctrl->bus_head; - ctrl->bus_head = func.bus_head; - if (ctrl->bus_head) - phprm_delete_resource(&ctrl->bus_head, ctrl->pci_dev->subordinate->number, 1); - - dbg("%s:pre-Bind PCI 0x%x Ctrl Resource Dump\n", __FUNCTION__, ctrl->bus); - phprm_dump_ctrl_res(ctrl); - bind_pci_resources_to_slots (ctrl); - - dbg("%s:post-Bind PCI 0x%x Ctrl Resource Dump\n", __FUNCTION__, ctrl->bus); - phprm_dump_ctrl_res(ctrl); - - - /* If all of the following fail, we don't have any resources for hot plug add */ - rc = 1; - rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - return (rc); -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.h b/drivers/pci/hotplug/shpchprm_nonacpi.h deleted file mode 100644 index cddaaa5ee1b3..000000000000 --- a/drivers/pci/hotplug/shpchprm_nonacpi.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * Copyright (C) 2003-2004 Intel Corporation - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to , - * - */ - -#ifndef _SHPCHPRM_NONACPI_H_ -#define _SHPCHPRM_NONACPI_H_ - -struct irq_info { - u8 bus, devfn; /* bus, device and function */ - struct { - u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ - u16 bitmap; /* Available IRQs */ - } __attribute__ ((packed)) irq[4]; - u8 slot; /* slot number, 0=onboard */ - u8 rfu; -} __attribute__ ((packed)); - -struct irq_routing_table { - u32 signature; /* PIRQ_SIGNATURE should be here */ - u16 version; /* PIRQ_VERSION */ - u16 size; /* Table size in bytes */ - u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ - u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ - u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ - u32 miniport_data; /* Crap */ - u8 rfu[11]; - u8 checksum; /* Modulo 256 checksum must give zero */ - struct irq_info slots[0]; -} __attribute__ ((packed)); - -#endif /* _SHPCHPRM_NONACPI_H_ */ -- cgit v1.2.3 From 7e88ed199689f333668b62348051202706b6a74a Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:37 -0700 Subject: [PATCH] shpchp: remove redundant display of PCI device resources Info about resources assigned to PCI devices is already available through sysfs and pci utilities. There's no need for shpchp to create another sysfs file to display the same information. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp_sysfs.c | 68 -------------------------------------- 1 file changed, 68 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index b0e781dbcffb..ce41719a88f7 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -88,75 +88,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL); -static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev, *fdev; - struct controller *ctrl; - char * out = buf; - int index; - struct resource *res; - struct pci_func *new_slot; - struct slot *slot; - - pdev = container_of (dev, struct pci_dev, dev); - ctrl = pci_get_drvdata(pdev); - - slot=ctrl->slot; - - while (slot) { - new_slot = shpchp_slot_find(slot->bus, slot->device, 0); - if (!new_slot) - break; - fdev = new_slot->pci_dev; - if (!fdev) - break; - out += sprintf(out, "assigned resources: memory\n"); - for (index=0; index <= PCI_NUM_RESOURCES; index++) { - res = &(fdev->resource[index]); - if (res && (res->flags & IORESOURCE_MEM) && - !(res->flags & IORESOURCE_PREFETCH)) { - out += sprintf(out, - "start = %8.8lx, length = %8.8lx\n", - res->start, (res->end - res->start)); - } - } - out += sprintf(out, "assigned resources: prefetchable memory\n"); - for (index=0; index <= PCI_NUM_RESOURCES; index++) { - res = &(fdev->resource[index]); - if (res && (res->flags & (IORESOURCE_MEM | - IORESOURCE_PREFETCH))) { - out += sprintf(out, - "start = %8.8lx, length = %8.8lx\n", - res->start, (res->end - res->start)); - } - } - out += sprintf(out, "assigned resources: IO\n"); - for (index=0; index <= PCI_NUM_RESOURCES; index++) { - res = &(fdev->resource[index]); - if (res && (res->flags & IORESOURCE_IO)) { - out += sprintf(out, - "start = %8.8lx, length = %8.8lx\n", - res->start, (res->end - res->start)); - } - } - out += sprintf(out, "assigned resources: bus numbers\n"); - if (fdev->subordinate) - out += sprintf(out, "start = %8.8x, length = %8.8x\n", - fdev->subordinate->secondary, - (fdev->subordinate->subordinate - - fdev->subordinate->secondary)); - else - out += sprintf(out, "start = %8.8x, length = %8.8x\n", - fdev->bus->number, 1); - slot=slot->next; - } - - return out - buf; -} -static DEVICE_ATTR (dev, S_IRUGO, show_dev, NULL); - void shpchp_create_ctrl_files (struct controller *ctrl) { device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl); - device_create_file (&ctrl->pci_dev->dev, &dev_attr_dev); } -- cgit v1.2.3 From 424600f9706b20a8a33ad928d3d0326bd88679bc Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:38 -0700 Subject: [PATCH] shpchp: reduce dependence on ACPI Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 12 + drivers/pci/hotplug/shpchp_core.c | 13 +- drivers/pci/hotplug/shpchp_ctrl.c | 1 - drivers/pci/hotplug/shpchp_hpc.c | 2 +- drivers/pci/hotplug/shpchp_pci.c | 52 ++- drivers/pci/hotplug/shpchprm.h | 43 -- drivers/pci/hotplug/shpchprm_acpi.c | 794 +++------------------------------ drivers/pci/hotplug/shpchprm_legacy.c | 97 +--- drivers/pci/hotplug/shpchprm_nonacpi.c | 108 +---- 9 files changed, 138 insertions(+), 984 deletions(-) delete mode 100644 drivers/pci/hotplug/shpchprm.h (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index deea56c73cf2..1b345ae81ddb 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -122,6 +122,13 @@ struct controller { u16 vendor_id; }; +struct hotplug_params { + u8 cache_line_size; + u8 latency_timer; + u8 enable_serr; + u8 enable_perr; +}; + /* Define AMD SHPC ID */ #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 @@ -192,6 +199,11 @@ extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ct extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot); extern int shpchp_configure_device(struct slot *p_slot); extern int shpchp_unconfigure_device(struct pci_func* func); +extern void get_hp_hw_control_from_firmware(struct pci_dev *dev); +extern void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp); +extern int shpchprm_get_physical_slot_number(struct controller *ctrl, + u32 *sun, u8 busnum, u8 devnum); /* Global variables */ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 8f5da504df34..e3c0c17295da 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ #include #include #include "shpchp.h" -#include "shpchprm.h" /* Global variables */ int shpchp_debug; @@ -566,16 +565,12 @@ static int __init shpcd_init(void) if (retval) goto error_hpc_init; - retval = shpchprm_init(PCI); - if (!retval) { - retval = pci_register_driver(&shpc_driver); - dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval); - info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - } + retval = pci_register_driver(&shpc_driver); + dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval); + info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); error_hpc_init: if (retval) { - shpchprm_cleanup(); shpchp_event_stop_thread(); } return retval; @@ -586,8 +581,6 @@ static void __exit shpcd_cleanup(void) dbg("unload_shpchpd()\n"); unload_shpchpd(); - shpchprm_cleanup(); - dbg("pci_unregister_driver\n"); pci_unregister_driver(&shpc_driver); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index aa507e453e49..23dd61c4c66c 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -40,7 +40,6 @@ #include #include "../pci.h" #include "shpchp.h" -#include "shpchprm.h" static void interrupt_event_handler(struct controller *ctrl); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 8d98410bf1c0..d55a9a7f8d2b 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -1566,8 +1566,8 @@ int shpc_init(struct controller * ctrl, err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq); goto abort_free_ctlr; } - /* Execute OSHP method here */ } + get_hp_hw_control_from_firmware(pdev); dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__); /* Add this HPC instance into the HPC list */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 89e404805777..6209972313f3 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -38,6 +38,55 @@ #include "../pci.h" #include "shpchp.h" +void program_fw_provided_values(struct pci_dev *dev) +{ + u16 pci_cmd, pci_bctl; + struct pci_dev *cdev; + struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */ + + /* Program hpp values for this device */ + if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || + (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) + return; + + get_hp_params_from_firmware(dev, &hpp); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer); + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + if (hpp.enable_serr) + pci_cmd |= PCI_COMMAND_SERR; + else + pci_cmd &= ~PCI_COMMAND_SERR; + if (hpp.enable_perr) + pci_cmd |= PCI_COMMAND_PARITY; + else + pci_cmd &= ~PCI_COMMAND_PARITY; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + + /* Program bridge control value and child devices */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, + hpp.latency_timer); + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); + if (hpp.enable_serr) + pci_bctl |= PCI_BRIDGE_CTL_SERR; + else + pci_bctl &= ~PCI_BRIDGE_CTL_SERR; + if (hpp.enable_perr) + pci_bctl |= PCI_BRIDGE_CTL_PARITY; + else + pci_bctl &= ~PCI_BRIDGE_CTL_PARITY; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); + if (dev->subordinate) { + list_for_each_entry(cdev, &dev->subordinate->devices, + bus_list) + program_fw_provided_values(cdev); + } + } +} + int shpchp_configure_device(struct slot *p_slot) { struct pci_dev *dev; @@ -90,8 +139,7 @@ int shpchp_configure_device(struct slot *p_slot) child->subordinate = pci_do_scan_bus(child); pci_bus_size_bridges(child); } - /* TBD: program firmware provided _HPP values */ - /* program_fw_provided_values(dev); */ + program_fw_provided_values(dev); } pci_bus_assign_resources(parent); diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h deleted file mode 100644 index df474b27d6e8..000000000000 --- a/drivers/pci/hotplug/shpchprm.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SHPCHPRM : SHPCHP Resource Manager for ACPI/non-ACPI platform - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * Copyright (C) 2003-2004 Intel Corporation - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to , - * - */ - -#ifndef _SHPCHPRM_H_ -#define _SHPCHPRM_H_ - -#ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY -#include "shpchprm_legacy.h" -#endif - -int shpchprm_init(enum php_ctlr_type ct); -void shpchprm_cleanup(void); -int shpchprm_set_hpp(struct controller *ctrl, struct pci_func *func, u8 card_type); -void shpchprm_enable_card(struct controller *ctrl, struct pci_func *func, u8 card_type); -int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum); - -#endif /* _SHPCHPRM_H_ */ diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 3d2f9c5269c7..3be518c7d47a 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -38,62 +38,11 @@ #include #include #include "shpchp.h" -#include "shpchprm.h" - -#define PCI_MAX_BUS 0x100 -#define ACPI_STA_DEVICE_PRESENT 0x01 #define METHOD_NAME__SUN "_SUN" #define METHOD_NAME__HPP "_HPP" #define METHOD_NAME_OSHP "OSHP" -#define PHP_RES_BUS 0xA0 -#define PHP_RES_IO 0xA1 -#define PHP_RES_MEM 0xA2 -#define PHP_RES_PMEM 0xA3 - -#define BRIDGE_TYPE_P2P 0x00 -#define BRIDGE_TYPE_HOST 0x01 - -/* this should go to drivers/acpi/include/ */ -struct acpi__hpp { - u8 cache_line_size; - u8 latency_timer; - u8 enable_serr; - u8 enable_perr; -}; - -struct acpi_php_slot { - struct acpi_php_slot *next; - struct acpi_bridge *bridge; - acpi_handle handle; - int seg; - int bus; - int dev; - int fun; - u32 sun; - void *slot_ops; /* _STA, _EJx, etc */ - struct slot *slot; -}; /* per func */ - -struct acpi_bridge { - struct acpi_bridge *parent; - struct acpi_bridge *next; - struct acpi_bridge *child; - acpi_handle handle; - int seg; - int pbus; /* pdev->bus->number */ - int pdevice; /* PCI_SLOT(pdev->devfn) */ - int pfunction; /* PCI_DEVFN(pdev->devfn) */ - int bus; /* pdev->subordinate->number */ - struct acpi__hpp *_hpp; - struct acpi_php_slot *slots; - int scanned; - int type; -}; - -static struct acpi_bridge *acpi_bridges_head; - static u8 * acpi_path_name( acpi_handle handle) { acpi_status status; @@ -109,82 +58,43 @@ static u8 * acpi_path_name( acpi_handle handle) return path_name; } -static void acpi_get__hpp ( struct acpi_bridge *ab); -static void acpi_run_oshp ( struct acpi_bridge *ab); - -static int acpi_add_slot_to_php_slots( - struct acpi_bridge *ab, - int bus_num, - acpi_handle handle, - u32 adr, - u32 sun - ) -{ - struct acpi_php_slot *aps; - static long samesun = -1; - - aps = (struct acpi_php_slot *) kmalloc (sizeof(struct acpi_php_slot), GFP_KERNEL); - if (!aps) { - err ("acpi_shpchprm: alloc for aps fail\n"); - return -1; - } - memset(aps, 0, sizeof(struct acpi_php_slot)); - - aps->handle = handle; - aps->bus = bus_num; - aps->dev = (adr >> 16) & 0xffff; - aps->fun = adr & 0xffff; - aps->sun = sun; - - aps->next = ab->slots; /* cling to the bridge */ - aps->bridge = ab; - ab->slots = aps; - - ab->scanned += 1; - if (!ab->_hpp) - acpi_get__hpp(ab); - - acpi_run_oshp(ab); - - if (sun != samesun) { - info("acpi_shpchprm: Slot sun(%x) at s:b:d:f=0x%02x:%02x:%02x:%02x\n", aps->sun, ab->seg, - aps->bus, aps->dev, aps->fun); - samesun = sun; - } - return 0; -} - -static void acpi_get__hpp ( struct acpi_bridge *ab) +static acpi_status +acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) { acpi_status status; u8 nui[4]; struct acpi_buffer ret_buf = { 0, NULL}; union acpi_object *ext_obj, *package; - u8 *path_name = acpi_path_name(ab->handle); + u8 *path_name = acpi_path_name(handle); int i, len = 0; /* get _hpp */ - status = acpi_evaluate_object(ab->handle, METHOD_NAME__HPP, NULL, &ret_buf); + status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf); switch (status) { case AE_BUFFER_OVERFLOW: ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL); if (!ret_buf.pointer) { - err ("acpi_shpchprm:%s alloc for _HPP fail\n", path_name); - return; + err ("%s:%s alloc for _HPP fail\n", __FUNCTION__, + path_name); + return AE_NO_MEMORY; } - status = acpi_evaluate_object(ab->handle, METHOD_NAME__HPP, NULL, &ret_buf); + status = acpi_evaluate_object(handle, METHOD_NAME__HPP, + NULL, &ret_buf); if (ACPI_SUCCESS(status)) break; default: if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _HPP fail=0x%x\n", path_name, status); - return; + dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__, + path_name, status); + return status; } } ext_obj = (union acpi_object *) ret_buf.pointer; if (ext_obj->type != ACPI_TYPE_PACKAGE) { - err ("acpi_shpchprm:%s _HPP obj not a package\n", path_name); + err ("%s:%s _HPP obj not a package\n", __FUNCTION__, + path_name); + status = AE_ERROR; goto free_and_return; } @@ -197,553 +107,41 @@ static void acpi_get__hpp ( struct acpi_bridge *ab) nui[i] = (u8)ext_obj->integer.value; break; default: - err ("acpi_shpchprm:%s _HPP obj type incorrect\n", path_name); + err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__, + path_name); + status = AE_ERROR; goto free_and_return; } } - ab->_hpp = kmalloc (sizeof (struct acpi__hpp), GFP_KERNEL); - if (!ab->_hpp) { - err ("acpi_shpchprm:%s alloc for _HPP failed\n", path_name); - goto free_and_return; - } - memset(ab->_hpp, 0, sizeof(struct acpi__hpp)); - - ab->_hpp->cache_line_size = nui[0]; - ab->_hpp->latency_timer = nui[1]; - ab->_hpp->enable_serr = nui[2]; - ab->_hpp->enable_perr = nui[3]; + hpp->cache_line_size = nui[0]; + hpp->latency_timer = nui[1]; + hpp->enable_serr = nui[2]; + hpp->enable_perr = nui[3]; - dbg(" _HPP: cache_line_size=0x%x\n", ab->_hpp->cache_line_size); - dbg(" _HPP: latency timer =0x%x\n", ab->_hpp->latency_timer); - dbg(" _HPP: enable SERR =0x%x\n", ab->_hpp->enable_serr); - dbg(" _HPP: enable PERR =0x%x\n", ab->_hpp->enable_perr); + dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size); + dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer); + dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr); + dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr); free_and_return: kfree(ret_buf.pointer); + return status; } -static void acpi_run_oshp ( struct acpi_bridge *ab) -{ - acpi_status status; - u8 *path_name = acpi_path_name(ab->handle); - - /* run OSHP */ - status = acpi_evaluate_object(ab->handle, METHOD_NAME_OSHP, NULL, NULL); - if (ACPI_FAILURE(status)) { - err("acpi_pciehprm:%s OSHP fails=0x%x\n", path_name, status); - } else - dbg("acpi_pciehprm:%s OSHP passes =0x%x\n", path_name, status); - return; -} - -/* find acpi_bridge downword from ab. */ -static struct acpi_bridge * -find_acpi_bridge_by_bus( - struct acpi_bridge *ab, - int seg, - int bus /* pdev->subordinate->number */ - ) -{ - struct acpi_bridge *lab = NULL; - - if (!ab) - return NULL; - - if ((ab->bus == bus) && (ab->seg == seg)) - return ab; - - if (ab->child) - lab = find_acpi_bridge_by_bus(ab->child, seg, bus); - - if (!lab) - if (ab->next) - lab = find_acpi_bridge_by_bus(ab->next, seg, bus); - - return lab; -} - -/* - * Build a device tree of ACPI PCI Bridges - */ -static void shpchprm_acpi_register_a_bridge ( - struct acpi_bridge **head, - struct acpi_bridge *pab, /* parent bridge to which child bridge is added */ - struct acpi_bridge *cab /* child bridge to add */ - ) -{ - struct acpi_bridge *lpab; - struct acpi_bridge *lcab; - - lpab = find_acpi_bridge_by_bus(*head, pab->seg, pab->bus); - if (!lpab) { - if (!(pab->type & BRIDGE_TYPE_HOST)) - warn("PCI parent bridge s:b(%x:%x) not in list.\n", pab->seg, pab->bus); - pab->next = *head; - *head = pab; - lpab = pab; - } - - if ((cab->type & BRIDGE_TYPE_HOST) && (pab == cab)) - return; - - lcab = find_acpi_bridge_by_bus(*head, cab->seg, cab->bus); - if (lcab) { - if ((pab->bus != lcab->parent->bus) || (lcab->bus != cab->bus)) - err("PCI child bridge s:b(%x:%x) in list with diff parent.\n", cab->seg, cab->bus); - return; - } else - lcab = cab; - - lcab->parent = lpab; - lcab->next = lpab->child; - lpab->child = lcab; -} - -static acpi_status shpchprm_acpi_build_php_slots_callback( - acpi_handle handle, - u32 Level, - void *context, - void **retval - ) +static void acpi_run_oshp(acpi_handle handle) { - ulong bus_num; - ulong seg_num; - ulong sun, adr; - ulong padr = 0; - acpi_handle phandle = NULL; - struct acpi_bridge *pab = (struct acpi_bridge *)context; - struct acpi_bridge *lab; acpi_status status; u8 *path_name = acpi_path_name(handle); - /* get _SUN */ - status = acpi_evaluate_integer(handle, METHOD_NAME__SUN, NULL, &sun); - switch(status) { - case AE_NOT_FOUND: - return AE_OK; - default: - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _SUN fail=0x%x\n", path_name, status); - return status; - } - } - - /* get _ADR. _ADR must exist if _SUN exists */ - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status); - return status; - } - - dbg("acpi_shpchprm:%s sun=0x%08x adr=0x%08x\n", path_name, (u32)sun, (u32)adr); - - status = acpi_get_parent(handle, &phandle); + /* run OSHP */ + status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL); if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s get_parent fail=0x%x\n", path_name, status); - return (status); - } - - bus_num = pab->bus; - seg_num = pab->seg; - - if (pab->bus == bus_num) { - lab = pab; + err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name, + status); } else { - dbg("WARN: pab is not parent\n"); - lab = find_acpi_bridge_by_bus(pab, seg_num, bus_num); - if (!lab) { - dbg("acpi_shpchprm: alloc new P2P bridge(%x) for sun(%08x)\n", (u32)bus_num, (u32)sun); - lab = (struct acpi_bridge *)kmalloc(sizeof(struct acpi_bridge), GFP_KERNEL); - if (!lab) { - err("acpi_shpchprm: alloc for ab fail\n"); - return AE_NO_MEMORY; - } - memset(lab, 0, sizeof(struct acpi_bridge)); - - lab->handle = phandle; - lab->pbus = pab->bus; - lab->pdevice = (int)(padr >> 16) & 0xffff; - lab->pfunction = (int)(padr & 0xffff); - lab->bus = (int)bus_num; - lab->scanned = 0; - lab->type = BRIDGE_TYPE_P2P; - - shpchprm_acpi_register_a_bridge (&acpi_bridges_head, pab, lab); - } else - dbg("acpi_shpchprm: found P2P bridge(%x) for sun(%08x)\n", (u32)bus_num, (u32)sun); - } - - acpi_add_slot_to_php_slots(lab, (int)bus_num, handle, (u32)adr, (u32)sun); - return (status); -} - -static int shpchprm_acpi_build_php_slots( - struct acpi_bridge *ab, - u32 depth - ) -{ - acpi_status status; - u8 *path_name = acpi_path_name(ab->handle); - - /* Walk down this pci bridge to get _SUNs if any behind P2P */ - status = acpi_walk_namespace ( ACPI_TYPE_DEVICE, - ab->handle, - depth, - shpchprm_acpi_build_php_slots_callback, - ab, - NULL ); - if (ACPI_FAILURE(status)) { - dbg("acpi_shpchprm:%s walk for _SUN on pci bridge seg:bus(%x:%x) fail=0x%x\n", path_name, ab->seg, ab->bus, status); - return -1; - } - - return 0; -} - -static void build_a_bridge( - struct acpi_bridge *pab, - struct acpi_bridge *ab - ) -{ - u8 *path_name = acpi_path_name(ab->handle); - - shpchprm_acpi_register_a_bridge (&acpi_bridges_head, pab, ab); - - switch (ab->type) { - case BRIDGE_TYPE_HOST: - dbg("acpi_shpchprm: Registered PCI HOST Bridge(%02x) on s:b:d:f(%02x:%02x:%02x:%02x) [%s]\n", - ab->bus, ab->seg, ab->pbus, ab->pdevice, ab->pfunction, path_name); - break; - case BRIDGE_TYPE_P2P: - dbg("acpi_shpchprm: Registered PCI P2P Bridge(%02x-%02x) on s:b:d:f(%02x:%02x:%02x:%02x) [%s]\n", - ab->pbus, ab->bus, ab->seg, ab->pbus, ab->pdevice, ab->pfunction, path_name); - break; - }; - - /* build any immediate PHP slots under this pci bridge */ - shpchprm_acpi_build_php_slots(ab, 1); -} - -static struct acpi_bridge * add_p2p_bridge( - acpi_handle handle, - struct acpi_bridge *pab, /* parent */ - ulong adr - ) -{ - struct acpi_bridge *ab; - struct pci_dev *pdev; - ulong devnum, funcnum; - u8 *path_name = acpi_path_name(handle); - - ab = (struct acpi_bridge *) kmalloc (sizeof(struct acpi_bridge), GFP_KERNEL); - if (!ab) { - err("acpi_shpchprm: alloc for ab fail\n"); - return NULL; - } - memset(ab, 0, sizeof(struct acpi_bridge)); - - devnum = (adr >> 16) & 0xffff; - funcnum = adr & 0xffff; - - pdev = pci_find_slot(pab->bus, PCI_DEVFN(devnum, funcnum)); - if (!pdev || !pdev->subordinate) { - err("acpi_shpchprm:%s is not a P2P Bridge\n", path_name); - kfree(ab); - return NULL; - } - - ab->handle = handle; - ab->seg = pab->seg; - ab->pbus = pab->bus; /* or pdev->bus->number */ - ab->pdevice = devnum; /* or PCI_SLOT(pdev->devfn) */ - ab->pfunction = funcnum; /* or PCI_FUNC(pdev->devfn) */ - ab->bus = pdev->subordinate->number; - ab->scanned = 0; - ab->type = BRIDGE_TYPE_P2P; - - dbg("acpi_shpchprm: P2P(%x-%x) on pci=b:d:f(%x:%x:%x) acpi=b:d:f(%x:%x:%x) [%s]\n", - pab->bus, ab->bus, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), - pab->bus, (u32)devnum, (u32)funcnum, path_name); - - build_a_bridge(pab, ab); - - return ab; -} - -static acpi_status scan_p2p_bridge( - acpi_handle handle, - u32 Level, - void *context, - void **retval - ) -{ - struct acpi_bridge *pab = (struct acpi_bridge *)context; - struct acpi_bridge *ab; - acpi_status status; - ulong adr = 0; - u8 *path_name = acpi_path_name(handle); - ulong devnum, funcnum; - struct pci_dev *pdev; - - /* get device, function */ - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status); - return AE_OK; + dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name); } - - devnum = (adr >> 16) & 0xffff; - funcnum = adr & 0xffff; - - pdev = pci_find_slot(pab->bus, PCI_DEVFN(devnum, funcnum)); - if (!pdev) - return AE_OK; - if (!pdev->subordinate) - return AE_OK; - - ab = add_p2p_bridge(handle, pab, adr); - if (ab) { - status = acpi_walk_namespace ( ACPI_TYPE_DEVICE, - handle, - (u32)1, - scan_p2p_bridge, - ab, - NULL); - if (ACPI_FAILURE(status)) - dbg("acpi_shpchprm:%s find_p2p fail=0x%x\n", path_name, status); - } - - return AE_OK; -} - -static struct acpi_bridge * add_host_bridge( - acpi_handle handle, - ulong segnum, - ulong busnum - ) -{ - ulong adr = 0; - acpi_status status; - struct acpi_bridge *ab; - u8 *path_name = acpi_path_name(handle); - - /* get device, function: host br adr is always 0000 though. */ - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status); - return NULL; - } - dbg("acpi_shpchprm: ROOT PCI seg(0x%x)bus(0x%x)dev(0x%x)func(0x%x) [%s]\n", (u32)segnum, (u32)busnum, - (u32)(adr >> 16) & 0xffff, (u32)adr & 0xffff, path_name); - - ab = (struct acpi_bridge *) kmalloc (sizeof(struct acpi_bridge), GFP_KERNEL); - if (!ab) { - err("acpi_shpchprm: alloc for ab fail\n"); - return NULL; - } - memset(ab, 0, sizeof(struct acpi_bridge)); - - ab->handle = handle; - ab->seg = (int)segnum; - ab->bus = ab->pbus = (int)busnum; - ab->pdevice = (int)(adr >> 16) & 0xffff; - ab->pfunction = (int)(adr & 0xffff); - ab->scanned = 0; - ab->type = BRIDGE_TYPE_HOST; - - build_a_bridge(ab, ab); - - return ab; -} - -static acpi_status acpi_scan_from_root_pci_callback ( - acpi_handle handle, - u32 Level, - void *context, - void **retval - ) -{ - ulong segnum = 0; - ulong busnum = 0; - acpi_status status; - struct acpi_bridge *ab; - u8 *path_name = acpi_path_name(handle); - - /* get bus number of this pci root bridge */ - status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL, &segnum); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) { - err("acpi_shpchprm:%s evaluate _SEG fail=0x%x\n", path_name, status); - return status; - } - segnum = 0; - } - - /* get bus number of this pci root bridge */ - status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL, &busnum); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s evaluate _BBN fail=0x%x\n", path_name, status); - return (status); - } - - ab = add_host_bridge(handle, segnum, busnum); - if (ab) { - status = acpi_walk_namespace ( ACPI_TYPE_DEVICE, - handle, - 1, - scan_p2p_bridge, - ab, - NULL); - if (ACPI_FAILURE(status)) - dbg("acpi_shpchprm:%s find_p2p fail=0x%x\n", path_name, status); - } - - return AE_OK; -} - -static int shpchprm_acpi_scan_pci (void) -{ - acpi_status status; - - /* - * TBD: traverse LDM device tree with the help of - * unified ACPI augmented for php device population. - */ - status = acpi_get_devices ( PCI_ROOT_HID_STRING, - acpi_scan_from_root_pci_callback, - NULL, - NULL ); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:get_device PCI ROOT HID fail=0x%x\n", status); - return -1; - } - - return 0; -} - -int shpchprm_init(enum php_ctlr_type ctlr_type) -{ - int rc; - - if (ctlr_type != PCI) - return -ENODEV; - - dbg("shpchprm ACPI init \n"); - acpi_bridges_head = NULL; - - /* construct PCI bus:device tree of acpi_handles */ - rc = shpchprm_acpi_scan_pci(); - if (rc) - return rc; - - dbg("shpchprm ACPI init %s\n", (rc)?"fail":"success"); - return rc; -} - -static void free_a_slot(struct acpi_php_slot *aps) -{ - dbg(" free a php func of slot(0x%02x) on PCI b:d:f=0x%02x:%02x:%02x\n", aps->sun, aps->bus, aps->dev, aps->fun); - - kfree(aps); -} - -static void free_a_bridge( struct acpi_bridge *ab) -{ - struct acpi_php_slot *aps, *next; - - switch (ab->type) { - case BRIDGE_TYPE_HOST: - dbg("Free ACPI PCI HOST Bridge(%x) [%s] on s:b:d:f(%x:%x:%x:%x)\n", - ab->bus, acpi_path_name(ab->handle), ab->seg, ab->pbus, ab->pdevice, ab->pfunction); - break; - case BRIDGE_TYPE_P2P: - dbg("Free ACPI PCI P2P Bridge(%x-%x) [%s] on s:b:d:f(%x:%x:%x:%x)\n", - ab->pbus, ab->bus, acpi_path_name(ab->handle), ab->seg, ab->pbus, ab->pdevice, ab->pfunction); - break; - }; - - /* free slots first */ - for (aps = ab->slots; aps; aps = next) { - next = aps->next; - free_a_slot(aps); - } - - kfree(ab); -} - -static void shpchprm_free_bridges ( struct acpi_bridge *ab) -{ - if (!ab) - return; - - if (ab->child) - shpchprm_free_bridges (ab->child); - - if (ab->next) - shpchprm_free_bridges (ab->next); - - free_a_bridge(ab); -} - -void shpchprm_cleanup(void) -{ - shpchprm_free_bridges (acpi_bridges_head); -} - -static int get_number_of_slots ( - struct acpi_bridge *ab, - int selfonly - ) -{ - struct acpi_php_slot *aps; - int prev_slot = -1; - int slot_num = 0; - - for ( aps = ab->slots; aps; aps = aps->next) - if (aps->dev != prev_slot) { - prev_slot = aps->dev; - slot_num++; - } - - if (ab->child) - slot_num += get_number_of_slots (ab->child, 0); - - if (selfonly) - return slot_num; - - if (ab->next) - slot_num += get_number_of_slots (ab->next, 0); - - return slot_num; -} - -static struct acpi_php_slot * get_acpi_slot ( - struct acpi_bridge *ab, - u32 sun - ) -{ - struct acpi_php_slot *aps = NULL; - - for ( aps = ab->slots; aps; aps = aps->next) - if (aps->sun == sun) - return aps; - - if (!aps && ab->child) { - aps = (struct acpi_php_slot *)get_acpi_slot (ab->child, sun); - if (aps) - return aps; - } - - if (!aps && ab->next) { - aps = (struct acpi_php_slot *)get_acpi_slot (ab->next, sun); - if (aps) - return aps; - } - - return aps; - } int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) @@ -755,108 +153,40 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -int shpchprm_set_hpp( - struct controller *ctrl, - struct pci_func *func, - u8 card_type - ) +void get_hp_hw_control_from_firmware(struct pci_dev *dev) { - struct acpi_bridge *ab; - struct pci_bus lpci_bus, *pci_bus; - int rc = 0; - unsigned int devfn; - u8 cls= 0x08; /* default cache line size */ - u8 lt = 0x40; /* default latency timer */ - u8 ep = 0; - u8 es = 0; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); - - if (ab) { - if (ab->_hpp) { - lt = (u8)ab->_hpp->latency_timer; - cls = (u8)ab->_hpp->cache_line_size; - ep = (u8)ab->_hpp->enable_perr; - es = (u8)ab->_hpp->enable_serr; - } else - dbg("_hpp: no _hpp for B/D/F=%#x/%#x/%#x. use default value\n", func->bus, func->device, func->function); - } else - dbg("_hpp: no acpi bridge for B/D/F = %#x/%#x/%#x. use default value\n", func->bus, func->device, func->function); - - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - /* set subordinate Latency Timer */ - rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, lt); - } - - /* set base Latency Timer */ - rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, lt); - dbg(" set latency timer =0x%02x: %x\n", lt, rc); - - rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, cls); - dbg(" set cache_line_size=0x%02x: %x\n", cls, rc); - - return rc; + /* + * OSHP is an optional ACPI firmware control method. If present, + * we need to run it to inform BIOS that we will control SHPC + * hardware from now on. + */ + acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev)); + if (!handle) + return; + acpi_run_oshp(handle); } -void shpchprm_enable_card( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp) { - u16 command, cmd, bcommand, bcmd; - struct pci_bus lpci_bus, *pci_bus; - struct acpi_bridge *ab; - unsigned int devfn; - int rc; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command); - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand); - } - - cmd = command = command | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - bcmd = bcommand = bcommand | PCI_BRIDGE_CTL_NO_ISA; + acpi_status status = AE_NOT_FOUND; + struct pci_dev *pdev = dev; - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); - if (ab) { - if (ab->_hpp) { - if (ab->_hpp->enable_perr) { - command |= PCI_COMMAND_PARITY; - bcommand |= PCI_BRIDGE_CTL_PARITY; - } else { - command &= ~PCI_COMMAND_PARITY; - bcommand &= ~PCI_BRIDGE_CTL_PARITY; - } - if (ab->_hpp->enable_serr) { - command |= PCI_COMMAND_SERR; - bcommand |= PCI_BRIDGE_CTL_SERR; - } else { - command &= ~PCI_COMMAND_SERR; - bcommand &= ~PCI_BRIDGE_CTL_SERR; - } - } else - dbg("no _hpp for B/D/F = %#x/%#x/%#x.\n", func->bus, func->device, func->function); - } else - dbg("no acpi bridge for B/D/F = %#x/%#x/%#x.\n", func->bus, func->device, func->function); - - if (command != cmd) { - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - } - if ((card_type == PCI_HEADER_TYPE_BRIDGE) && (bcommand != bcmd)) { - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand); + /* + * _HPP settings apply to all child buses, until another _HPP is + * encountered. If we don't find an _HPP for the input pci dev, + * look for it in the parent device scope since that would apply to + * this pci dev. If we don't find any _HPP, use hardcoded defaults + */ + while (pdev && (ACPI_FAILURE(status))) { + acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev)); + if (!handle) + break; + status = acpi_run_hpp(handle, hpp); + if (!(pdev->bus->parent)) + break; + /* Check if a parent object supports _HPP */ + pdev = pdev->bus->parent->self; } } diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index 6c27debe9522..cfc6092e2afd 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -37,10 +37,6 @@ #include "shpchp.h" #include "shpchprm.h" -void shpchprm_cleanup(void) -{ -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -49,97 +45,14 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -int shpchprm_set_hpp( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp) { - u32 rc; - u8 temp_byte; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - temp_byte = 0x40; /* hard coded value for LT */ - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - /* set subordinate Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte); - if (rc) { - dbg("%s: set secondary LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, - func->device, func->function); - return rc; - } - } - - /* set base Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte); - if (rc) { - dbg("%s: set LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - return rc; - } - - /* set Cache Line size */ - temp_byte = 0x08; /* hard coded value for CLS */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte); - if (rc) { - dbg("%s: set CLS error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - } - - /* set enable_perr */ - /* set enable_serr */ - - return rc; + return; } -void shpchprm_enable_card( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_hw_control_from_firmware(struct pci_dev *dev) { - u16 command, bcommand; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - int rc; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command); - command |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR - | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand); - bcommand |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR - | PCI_BRIDGE_CTL_NO_ISA; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand); - } -} - -static int legacy_shpchprm_init_pci(void) -{ - return 0; + return; } -int shpchprm_init(enum php_ctlr_type ctrl_type) -{ - int retval; - - switch (ctrl_type) { - case PCI: - retval = legacy_shpchprm_init_pci(); - break; - default: - retval = -ENODEV; - break; - } - - return retval; -} diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index 9d4ccae5f78e..f36c188c23eb 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -37,11 +37,6 @@ #include "shpchp.h" #include "shpchprm.h" -void shpchprm_cleanup(void) -{ - return; -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -51,106 +46,13 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -int shpchprm_set_hpp( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) -{ - u32 rc; - u8 temp_byte; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - temp_byte = 0x40; /* hard coded value for LT */ - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - /* set subordinate Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte); - - if (rc) { - dbg("%s: set secondary LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, - func->device, func->function); - return rc; - } - } - - /* set base Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte); - - if (rc) { - dbg("%s: set LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - return rc; - } - - /* set Cache Line size */ - temp_byte = 0x08; /* hard coded value for CLS */ - - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte); - - if (rc) { - dbg("%s: set CLS error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - } - - /* set enable_perr */ - /* set enable_serr */ - - return rc; -} - -void shpchprm_enable_card( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp) { - u16 command, bcommand; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - int rc; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command); - - command |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR - | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand); - - bcommand |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR - | PCI_BRIDGE_CTL_NO_ISA; - - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand); - } -} - -static int legacy_shpchprm_init_pci(void) -{ - return 0; + return; } -int shpchprm_init(enum php_ctlr_type ctrl_type) +void get_hp_hw_control_from_firmware(struct pci_dev *dev) { - int retval; - - switch (ctrl_type) { - case PCI: - retval = legacy_shpchprm_init_pci(); - break; - default: - retval = -ENODEV; - break; - } - - return retval; + return; } -- cgit v1.2.3 From 1410dc1cef1e2f5e90c1fcb97041f42e0eee35b4 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:39 -0700 Subject: [PATCH] shpchp: detect SHPC capability before doing a lot of work The shpc driver registers its probe function for all pci-pci bridges in the system. Not all of them will be shpc capable, so look for this capability early in the probe function and return if there's no work to do on this bridge. The old shpc driver did some initialization work on all bridges before detecting that shpc is not supported and unwinds the work it's already done in that case. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp_core.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index e3c0c17295da..3132d60a79f5 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -351,6 +351,17 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp return 0; } +static int is_shpc_capable(struct pci_dev *dev) +{ + if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == + PCI_DEVICE_ID_AMD_GOLAM_7450)) + return 1; + if (pci_find_capability(dev, PCI_CAP_ID_SHPC)) + return 1; + + return 0; +} + static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int rc; @@ -359,6 +370,9 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int first_device_num; /* first PCI device number supported by this SHPC */ int num_ctlr_slots; /* number of slots supported by this SHPC */ + if (!is_shpc_capable(pdev)) + return -ENODEV; + ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL); if (!ctrl) { err("%s : out of memory\n", __FUNCTION__); -- cgit v1.2.3 From 70b6091946ab486c4dab8abeb4a3fc2bf7d3e7fe Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:40 -0700 Subject: [PATCH] shpchp: dont save PCI config for hotplug slots/devices This patch eliminates saving the PCI config header for devices in hotplug capable slots. We now use the PCI core to get the specific parts of the config header as required. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 1 - drivers/pci/hotplug/shpchp_core.c | 7 - drivers/pci/hotplug/shpchp_ctrl.c | 48 ++++-- drivers/pci/hotplug/shpchp_pci.c | 314 -------------------------------------- 4 files changed, 32 insertions(+), 338 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 1b345ae81ddb..5e99260987e8 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -63,7 +63,6 @@ struct pci_func { u8 switch_save; u8 presence_save; u8 pwr_save; - u32 config_space[0x20]; struct pci_dev* pci_dev; }; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 3132d60a79f5..5d4fc28969d0 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -424,13 +424,6 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) first_device_num = ctrl->slot_device_offset; num_ctlr_slots = ctrl->num_slots; - /* Store PCI Config Space for all devices on this bus */ - rc = shpchp_save_config(ctrl, ctrl->slot_bus, num_ctlr_slots, first_device_num); - if (rc) { - err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc); - goto err_out_free_ctrl_bus; - } - ctrl->add_support = 1; /* Setup the slot information structures */ diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 23dd61c4c66c..c55103f3cebd 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -328,21 +328,20 @@ static int slot_remove(struct pci_func * old_slot) /** * bridge_slot_remove - Removes a node from the linked list of slots. * @bridge: bridge to remove + * @secondaryBus: secondary PCI bus number for bridge being removed + * @subordinateBus: subordinate PCI bus number for bridge being removed * * Returns 0 if successful, !0 otherwise. */ -static int bridge_slot_remove(struct pci_func *bridge) +static int bridge_slot_remove(struct pci_func *bridge, u8 secondaryBus, + u8 subordinateBus) { - u8 subordinateBus, secondaryBus; u8 tempBus; struct pci_func *next; if (bridge == NULL) return(1); - secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; - subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; - for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { next = shpchp_slot_list[tempBus]; @@ -410,16 +409,23 @@ struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index) return(NULL); } -static int is_bridge(struct pci_func * func) +static int is_bridge(struct pci_func *func, struct controller *ctrl) { - /* Check the header type */ - if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) + u8 hdr_type; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + + /* + * Note: device may have just been hot-added and not yet scanned + * by the pci core, so its pci_dev structure may not exist yet + */ + pci_bus_read_config_byte(bus, PCI_DEVFN(func->device, func->function), + PCI_HEADER_TYPE, &hdr_type); + if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) return 1; else return 0; } - /* The following routines constitute the bulk of the hotplug controller logic */ @@ -709,8 +715,6 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) goto err_exit; } - shpchp_save_slot_config(ctrl, func); - func->status = 0; func->switch_save = 0x10; func->is_a_board = 0x01; @@ -769,10 +773,18 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) u8 hp_slot; u32 rc; struct slot *p_slot; + u8 secondary = 0, subordinate = 0; + int remove_bridge; if (func == NULL) return(1); + if ((remove_bridge = is_bridge(func, ctrl))) { + /* Stash away bus information before we destroy it */ + secondary = func->pci_dev->subordinate->secondary; + subordinate = func->pci_dev->subordinate->subordinate; + } + if (shpchp_unconfigure_device(func)) return(1); @@ -825,10 +837,11 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) if (ctrl->add_support) { while (func) { - if (is_bridge(func)) { + if (remove_bridge) { dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); - bridge_slot_remove(func); + bridge_slot_remove(func, secondary, + subordinate); } else dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); @@ -1185,9 +1198,12 @@ int shpchp_enable_slot (struct slot *p_slot) rc = board_added(func, p_slot->ctrl); if (rc) { - if (is_bridge(func)) - bridge_slot_remove(func); - else + if (is_bridge(func, p_slot->ctrl)) { + u8 secondary = func->pci_dev->subordinate->secondary; + u8 subordinate = + func->pci_dev->subordinate->subordinate; + bridge_slot_remove(func, secondary, subordinate); + } else slot_remove(func); /* Setup slot structure with entry for empty slot */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 6209972313f3..f51a97d7611f 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -166,317 +166,3 @@ int shpchp_unconfigure_device(struct pci_func* func) return rc; } -/* More PCI configuration routines; this time centered around hotplug controller */ - - -/* - * shpchp_save_config - * - * Reads configuration for all slots in a PCI bus and saves info. - * - * Note: For non-hot plug busses, the slot # saved is the device # - * - * returns 0 if success - */ -int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num) -{ - int rc; - u8 class_code; - u8 header_type; - u32 ID; - u8 secondary_bus; - struct pci_func *new_slot; - int sub_bus; - int FirstSupported; - int LastSupported; - int max_functions; - int function; - u8 DevError; - int device = 0; - int cloop = 0; - int stop_it; - int index; - int is_hot_plug = num_ctlr_slots || first_device_num; - struct pci_bus lpci_bus, *pci_bus; - - dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__, - num_ctlr_slots, first_device_num); - - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - - dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__, - num_ctlr_slots, first_device_num); - - /* Decide which slots are supported */ - if (is_hot_plug) { - /********************************* - * is_hot_plug is the slot mask - *********************************/ - FirstSupported = first_device_num; - LastSupported = FirstSupported + num_ctlr_slots - 1; - } else { - FirstSupported = 0; - LastSupported = 0x1F; - } - - dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported, - LastSupported); - - /* Save PCI configuration space for all devices in supported slots */ - pci_bus->number = busnumber; - for (device = FirstSupported; device <= LastSupported; device++) { - ID = 0xFFFFFFFF; - rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), - PCI_VENDOR_ID, &ID); - - if (ID != 0xFFFFFFFF) { /* device in slot */ - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0), - 0x0B, &class_code); - if (rc) - return rc; - - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0), - PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - dbg("class_code = %x, header_type = %x\n", class_code, header_type); - - /* If multi-function device, set max_functions to 8 */ - if (header_type & 0x80) - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - DevError = 0; - - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */ - /* Recurse the subordinate bus - * get the subordinate bus number - */ - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - PCI_SECONDARY_BUS, &secondary_bus); - if (rc) { - return rc; - } else { - sub_bus = (int) secondary_bus; - - /* Save secondary bus cfg spc with this recursive call. */ - rc = shpchp_save_config(ctrl, sub_bus, 0, 0); - if (rc) - return rc; - } - } - - index = 0; - new_slot = shpchp_slot_find(busnumber, device, index++); - - dbg("new_slot = %p\n", new_slot); - - while (new_slot && (new_slot->function != (u8) function)) { - new_slot = shpchp_slot_find(busnumber, device, index++); - dbg("new_slot = %p\n", new_slot); - } - if (!new_slot) { - /* Setup slot structure. */ - new_slot = shpchp_slot_create(busnumber); - dbg("new_slot = %p\n", new_slot); - - if (new_slot == NULL) - return(1); - } - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = (u8) function; - new_slot->is_a_board = 1; - new_slot->switch_save = 0x10; - new_slot->pwr_save = 1; - /* In case of unsupported board */ - new_slot->status = DevError; - new_slot->pci_dev = pci_find_slot(new_slot->bus, - (new_slot->device << 3) | new_slot->function); - dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev); - - for (cloop = 0; cloop < 0x20; cloop++) { - rc = pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(device, function), - cloop << 2, - (u32 *) &(new_slot->config_space [cloop])); - /* dbg("new_slot->config_space[%x] = %x\n", - cloop, new_slot->config_space[cloop]); */ - if (rc) - return rc; - } - - function++; - - stop_it = 0; - - /* this loop skips to the next present function - * reading in Class Code and Header type. - */ - - while ((function < max_functions)&&(!stop_it)) { - rc = pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(device, function), - PCI_VENDOR_ID, &ID); - - if (ID == 0xFFFFFFFF) { /* nothing there. */ - function++; - dbg("Nothing there\n"); - } else { /* Something there */ - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - 0x0B, &class_code); - if (rc) - return rc; - - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - dbg("class_code = %x, header_type = %x\n", - class_code, header_type); - stop_it++; - } - } - - } while (function < max_functions); - /* End of IF (device in slot?) */ - } else if (is_hot_plug) { - /* Setup slot structure with entry for empty slot */ - new_slot = shpchp_slot_create(busnumber); - - if (new_slot == NULL) { - return(1); - } - dbg("new_slot = %p\n", new_slot); - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = 0; - new_slot->is_a_board = 0; - new_slot->presence_save = 0; - new_slot->switch_save = 0; - } - } /* End of FOR loop */ - - return(0); -} - - -/* - * shpchp_save_slot_config - * - * Saves configuration info for all PCI devices in a given slot - * including subordinate busses. - * - * returns 0 if success - */ -int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot) -{ - int rc; - u8 class_code; - u8 header_type; - u32 ID; - u8 secondary_bus; - int sub_bus; - int max_functions; - int function; - int cloop = 0; - int stop_it; - struct pci_bus lpci_bus, *pci_bus; - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = new_slot->bus; - - ID = 0xFFFFFFFF; - - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0), - PCI_VENDOR_ID, &ID); - - if (ID != 0xFFFFFFFF) { /* device in slot */ - pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0), - 0x0B, &class_code); - - pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0), - PCI_HEADER_TYPE, &header_type); - - if (header_type & 0x80) /* Multi-function device */ - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - /* Recurse the subordinate bus */ - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_SECONDARY_BUS, &secondary_bus); - - sub_bus = (int) secondary_bus; - - /* Save the config headers for the secondary bus. */ - rc = shpchp_save_config(ctrl, sub_bus, 0, 0); - - if (rc) - return rc; - - } /* End of IF */ - - new_slot->status = 0; - - for (cloop = 0; cloop < 0x20; cloop++) { - pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(new_slot->device, function), - cloop << 2, - (u32 *) &(new_slot->config_space [cloop])); - } - - function++; - - stop_it = 0; - - /* this loop skips to the next present function - * reading in the Class Code and the Header type. - */ - - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_VENDOR_ID, &ID); - - if (ID == 0xFFFFFFFF) { /* nothing there. */ - function++; - } else { /* Something there */ - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - 0x0B, &class_code); - - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_HEADER_TYPE, &header_type); - - stop_it++; - } - } - - } while (function < max_functions); - } /* End of IF (device in slot?) */ - else { - return 2; - } - - return 0; -} - -- cgit v1.2.3 From 2178bfad9ccb0cbeb79599dd1dc349dd4567aa49 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:41 -0700 Subject: [PATCH] shpchp: remove redundant data structures State information is currently stored in per-slot as well as per-pci-function data structures in shpchp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 35 +--- drivers/pci/hotplug/shpchp_core.c | 20 -- drivers/pci/hotplug/shpchp_ctrl.c | 405 ++++---------------------------------- drivers/pci/hotplug/shpchp_pci.c | 27 ++- 4 files changed, 63 insertions(+), 424 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 5e99260987e8..052c11f14a79 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -52,34 +52,18 @@ extern int shpchp_debug; #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) -struct pci_func { - struct pci_func *next; - u8 bus; - u8 device; - u8 function; - u8 is_a_board; - u16 status; - u8 configured; - u8 switch_save; - u8 presence_save; - u8 pwr_save; - struct pci_dev* pci_dev; -}; - #define SLOT_MAGIC 0x67267321 struct slot { u32 magic; struct slot *next; u8 bus; u8 device; + u16 status; u32 number; u8 is_a_board; - u8 configured; u8 state; - u8 switch_save; u8 presence_save; - u32 capabilities; - u16 reserved2; + u8 pwr_save; struct timer_list task_event; u8 hp_slot; struct controller *ctrl; @@ -106,19 +90,14 @@ struct controller { struct hpc_ops *hpc_ops; wait_queue_head_t queue; /* sleep & wake process */ u8 next_event; - u8 seg; u8 bus; u8 device; u8 function; - u8 rev; u8 slot_device_offset; u8 add_support; enum pci_bus_speed speed; u32 first_slot; /* First physical slot number */ u8 slot_bus; /* Bus where the slots handled by this controller sit */ - u8 push_flag; - u16 ctlrcap; - u16 vendor_id; }; struct hotplug_params { @@ -169,13 +148,9 @@ struct hotplug_params { * error Messages */ #define msg_initialization_err "Initialization failure, error=%d\n" -#define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n" -#define msg_HPC_non_shpc "The PCI hot plug controller is not supported by this driver.\n" -#define msg_HPC_not_supported "This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n" #define msg_button_on "PCI slot #%d - powering on due to button press.\n" #define msg_button_off "PCI slot #%d - powering off due to button press.\n" #define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n" -#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n" /* sysfs functions for the hotplug controller info */ extern void shpchp_create_ctrl_files (struct controller *ctrl); @@ -183,8 +158,6 @@ extern void shpchp_create_ctrl_files (struct controller *ctrl); /* controller functions */ extern int shpchp_event_start_thread(void); extern void shpchp_event_stop_thread(void); -extern struct pci_func *shpchp_slot_create(unsigned char busnumber); -extern struct pci_func *shpchp_slot_find(unsigned char bus, unsigned char device, unsigned char index); extern int shpchp_enable_slot(struct slot *slot); extern int shpchp_disable_slot(struct slot *slot); @@ -195,9 +168,8 @@ extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id); /* pci functions */ extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num); -extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot); extern int shpchp_configure_device(struct slot *p_slot); -extern int shpchp_unconfigure_device(struct pci_func* func); +extern int shpchp_unconfigure_device(struct slot *p_slot); extern void get_hp_hw_control_from_firmware(struct pci_dev *dev); extern void get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp); @@ -207,7 +179,6 @@ extern int shpchprm_get_physical_slot_number(struct controller *ctrl, /* Global variables */ extern struct controller *shpchp_ctrl_list; -extern struct pci_func *shpchp_slot_list[256]; struct ctrl_reg { volatile u32 base_offset; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 5d4fc28969d0..b54edccbf2cc 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -45,7 +45,6 @@ int shpchp_debug; int shpchp_poll_mode; int shpchp_poll_time; struct controller *shpchp_ctrl_list; /* = NULL */ -struct pci_func *shpchp_slot_list[256]; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -475,7 +474,6 @@ err_out_none: static int shpc_start_thread(void) { - int loop; int retval = 0; dbg("Initialize + Start the notification/polling mechanism \n"); @@ -486,20 +484,11 @@ static int shpc_start_thread(void) return retval; } - dbg("Initialize slot lists\n"); - /* One slot list for each bus in the system */ - for (loop = 0; loop < 256; loop++) { - shpchp_slot_list[loop] = NULL; - } - return retval; } static void __exit unload_shpchpd(void) { - struct pci_func *next; - struct pci_func *TempSlot; - int loop; struct controller *ctrl; struct controller *tctrl; @@ -519,15 +508,6 @@ static void __exit unload_shpchpd(void) kfree(tctrl); } - for (loop = 0; loop < 256; loop++) { - next = shpchp_slot_list[loop]; - while (next != NULL) { - TempSlot = next; - next = next->next; - kfree(TempSlot); - } - } - /* Stop the notification mechanism */ shpchp_event_stop_thread(); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index c55103f3cebd..b6fde3565e55 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -54,19 +54,16 @@ u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Attention Button Change */ dbg("shpchp: Attention button interrupt received.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); ctrl->next_event = (ctrl->next_event + 1) % 10; @@ -111,14 +108,11 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Switch Change */ dbg("shpchp: Switch interrupt received.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -128,19 +122,18 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) rc++; p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); dbg("%s: Card present %x Power status %x\n", __FUNCTION__, - func->presence_save, func->pwr_save); + p_slot->presence_save, p_slot->pwr_save); if (getstatus) { /* * Switch opened */ info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0; taskInfo->event_type = INT_SWITCH_OPEN; - if (func->pwr_save && func->presence_save) { + if (p_slot->pwr_save && p_slot->presence_save) { taskInfo->event_type = INT_POWER_FAULT; err("Surprise Removal of card\n"); } @@ -149,7 +142,6 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) * Switch closed */ info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0x10; taskInfo->event_type = INT_SWITCH_CLOSE; } @@ -165,14 +157,11 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; /*u8 temp_byte;*/ - struct pci_func *func; struct event_info *taskInfo; /* Presence Change */ dbg("shpchp: Presence/Notify input change.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -186,8 +175,8 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id) /* * Save the presence state */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); - if (func->presence_save) { + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + if (p_slot->presence_save) { /* * Card Present */ @@ -212,14 +201,11 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) struct controller *ctrl = (struct controller *) inst_id; struct slot *p_slot; u8 rc = 0; - struct pci_func *func; struct event_info *taskInfo; /* Power fault */ dbg("shpchp: Power fault interrupt received.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -235,7 +221,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) * Power fault Cleared */ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->status = 0x00; + p_slot->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* @@ -244,7 +230,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); taskInfo->event_type = INT_POWER_FAULT; /* set power fault status for this board */ - func->status = 0xFF; + p_slot->status = 0xFF; info("power fault bit %x set\n", hp_slot); } if (rc) @@ -253,179 +239,6 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) return rc; } -/** - * shpchp_slot_create - Creates a node and adds it to the proper bus. - * @busnumber - bus where new node is to be located - * - * Returns pointer to the new node or NULL if unsuccessful - */ -struct pci_func *shpchp_slot_create(u8 busnumber) -{ - struct pci_func *new_slot; - struct pci_func *next; - - new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL); - - if (new_slot == NULL) { - return(new_slot); - } - - memset(new_slot, 0, sizeof(struct pci_func)); - - new_slot->next = NULL; - new_slot->configured = 1; - - if (shpchp_slot_list[busnumber] == NULL) { - shpchp_slot_list[busnumber] = new_slot; - } else { - next = shpchp_slot_list[busnumber]; - while (next->next != NULL) - next = next->next; - next->next = new_slot; - } - return(new_slot); -} - - -/* - * slot_remove - Removes a node from the linked list of slots. - * @old_slot: slot to remove - * - * Returns 0 if successful, !0 otherwise. - */ -static int slot_remove(struct pci_func * old_slot) -{ - struct pci_func *next; - - if (old_slot == NULL) - return(1); - - next = shpchp_slot_list[old_slot->bus]; - - if (next == NULL) { - return(1); - } - - if (next == old_slot) { - shpchp_slot_list[old_slot->bus] = old_slot->next; - kfree(old_slot); - return(0); - } - - while ((next->next != old_slot) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == old_slot) { - next->next = old_slot->next; - kfree(old_slot); - return(0); - } else - return(2); -} - - -/** - * bridge_slot_remove - Removes a node from the linked list of slots. - * @bridge: bridge to remove - * @secondaryBus: secondary PCI bus number for bridge being removed - * @subordinateBus: subordinate PCI bus number for bridge being removed - * - * Returns 0 if successful, !0 otherwise. - */ -static int bridge_slot_remove(struct pci_func *bridge, u8 secondaryBus, - u8 subordinateBus) -{ - u8 tempBus; - struct pci_func *next; - - if (bridge == NULL) - return(1); - - for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { - next = shpchp_slot_list[tempBus]; - - while (!slot_remove(next)) { - next = shpchp_slot_list[tempBus]; - } - } - - next = shpchp_slot_list[bridge->bus]; - - if (next == NULL) { - return(1); - } - - if (next == bridge) { - shpchp_slot_list[bridge->bus] = bridge->next; - kfree(bridge); - return(0); - } - - while ((next->next != bridge) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == bridge) { - next->next = bridge->next; - kfree(bridge); - return(0); - } else - return(2); -} - - -/** - * shpchp_slot_find - Looks for a node by bus, and device, multiple functions accessed - * @bus: bus to find - * @device: device to find - * @index: is 0 for first function found, 1 for the second... - * - * Returns pointer to the node if successful, %NULL otherwise. - */ -struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index) -{ - int found = -1; - struct pci_func *func; - - func = shpchp_slot_list[bus]; - - if ((func == NULL) || ((func->device == device) && (index == 0))) - return(func); - - if (func->device == device) - found++; - - while (func->next != NULL) { - func = func->next; - - if (func->device == device) - found++; - - if (found == index) - return(func); - } - - return(NULL); -} - -static int is_bridge(struct pci_func *func, struct controller *ctrl) -{ - u8 hdr_type; - struct pci_bus *bus = ctrl->pci_dev->subordinate; - - /* - * Note: device may have just been hot-added and not yet scanned - * by the pci core, so its pci_dev structure may not exist yet - */ - pci_bus_read_config_byte(bus, PCI_DEVFN(func->device, func->function), - PCI_HEADER_TYPE, &hdr_type); - if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) - return 1; - else - return 0; -} - /* The following routines constitute the bulk of the hotplug controller logic */ @@ -495,19 +308,20 @@ enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp) * Configures board * */ -static u32 board_added(struct pci_func * func, struct controller * ctrl) +static u32 board_added(struct slot *p_slot) { u8 hp_slot; u8 slots_not_empty = 0; u32 rc = 0; - struct slot *p_slot; enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; u8 pi, mode; + struct controller *ctrl = p_slot->ctrl; - p_slot = shpchp_find_slot(ctrl, func->device); - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; - dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", + __FUNCTION__, p_slot->device, + ctrl->slot_device_offset, hp_slot); /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -699,13 +513,13 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) wait_for_ctrl_irq (ctrl); dbg("%s: after long_delay\n", __FUNCTION__); - dbg("%s: func status = %x\n", __FUNCTION__, func->status); + dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); /* Check for a power fault */ - if (func->status == 0xFF) { + if (p_slot->status == 0xFF) { /* power fault occurred, but it was benign */ dbg("%s: power fault\n", __FUNCTION__); rc = POWER_FAILURE; - func->status = 0; + p_slot->status = 0; goto err_exit; } @@ -715,10 +529,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) goto err_exit; } - func->status = 0; - func->switch_save = 0x10; - func->is_a_board = 0x01; - func->pwr_save = 1; + p_slot->status = 0; + p_slot->is_a_board = 0x01; + p_slot->pwr_save = 1; /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -767,38 +580,23 @@ err_exit: * remove_board - Turns off slot and LED's * */ -static u32 remove_board(struct pci_func *func, struct controller *ctrl) +static u32 remove_board(struct slot *p_slot) { - u8 device; + struct controller *ctrl = p_slot->ctrl; u8 hp_slot; u32 rc; - struct slot *p_slot; - u8 secondary = 0, subordinate = 0; - int remove_bridge; - - if (func == NULL) - return(1); - - if ((remove_bridge = is_bridge(func, ctrl))) { - /* Stash away bus information before we destroy it */ - secondary = func->pci_dev->subordinate->secondary; - subordinate = func->pci_dev->subordinate->subordinate; - } - if (shpchp_unconfigure_device(func)) + if (shpchp_unconfigure_device(p_slot)) return(1); - device = func->device; - - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); /* Change status to shutdown */ - if (func->is_a_board) - func->status = 0x01; - func->configured = 0; + if (p_slot->is_a_board) + p_slot->status = 0x01; /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -835,36 +633,8 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) /* Done with exclusive hardware access */ up(&ctrl->crit_sect); - if (ctrl->add_support) { - while (func) { - if (remove_bridge) { - dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, - func->device, func->function); - bridge_slot_remove(func, secondary, - subordinate); - } else - dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, - func->device, func->function); - slot_remove(func); - - func = shpchp_slot_find(ctrl->slot_bus, device, 0); - } - - /* Setup slot structure with entry for empty slot */ - func = shpchp_slot_create(ctrl->slot_bus); - - if (func == NULL) { - return(1); - } - - func->bus = ctrl->slot_bus; - func->device = device; - func->function = 0; - func->configured = 0; - func->switch_save = 0x10; - func->pwr_save = 0; - func->is_a_board = 0; - } + p_slot->pwr_save = 0; + p_slot->is_a_board = 0; return 0; } @@ -1006,7 +776,6 @@ static void interrupt_event_handler(struct controller *ctrl) { int loop = 0; int change = 1; - struct pci_func *func; u8 hp_slot; u8 getstatus; struct slot *p_slot; @@ -1021,11 +790,10 @@ static void interrupt_event_handler(struct controller *ctrl) ctrl->event_queue[loop].event_type); hp_slot = ctrl->event_queue[loop].hp_slot; - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("%s: hp_slot %d, func %p, p_slot %p\n", __FUNCTION__, hp_slot, func, p_slot); + dbg("%s: hp_slot %d, p_slot %p\n", + __FUNCTION__, hp_slot, p_slot); if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { dbg("%s: button cancel\n", __FUNCTION__); @@ -1147,13 +915,6 @@ int shpchp_enable_slot (struct slot *p_slot) { u8 getstatus = 0; int rc; - struct pci_func *func; - - func = shpchp_slot_find(p_slot->bus, p_slot->device, 0); - if (!func) { - dbg("%s: Error! slot NULL\n", __FUNCTION__); - return -ENODEV; - } /* Check to see if (latch closed, card present, power off) */ down(&p_slot->ctrl->crit_sect); @@ -1177,75 +938,35 @@ int shpchp_enable_slot (struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - slot_remove(func); - - func = shpchp_slot_create(p_slot->bus); - if (func == NULL) - return -ENOMEM; - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; + p_slot->is_a_board = 1; /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); - p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save)); - dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); + dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; - rc = board_added(func, p_slot->ctrl); + rc = board_added(p_slot); if (rc) { - if (is_bridge(func, p_slot->ctrl)) { - u8 secondary = func->pci_dev->subordinate->secondary; - u8 subordinate = - func->pci_dev->subordinate->subordinate; - bridge_slot_remove(func, secondary, subordinate); - } else - slot_remove(func); - - /* Setup slot structure with entry for empty slot */ - func = shpchp_slot_create(p_slot->bus); - if (func == NULL) - return -ENOMEM; /* Out of memory */ - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; - - /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, + &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; } - if (p_slot) - update_slot_info(p_slot); - + update_slot_info(p_slot); return rc; } int shpchp_disable_slot (struct slot *p_slot) { - u8 class_code, header_type, BCR; - u8 index = 0; u8 getstatus = 0; u32 rc = 0; int ret = 0; - unsigned int devfn; - struct pci_bus *pci_bus; - struct pci_func *func; if (!p_slot->ctrl) return -ENODEV; - pci_bus = p_slot->ctrl->pci_dev->subordinate; - /* Check to see if (latch closed, card present, power on) */ down(&p_slot->ctrl->crit_sect); @@ -1269,54 +990,8 @@ int shpchp_disable_slot (struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - func = shpchp_slot_find(p_slot->bus, p_slot->device, index++); - - /* Make sure there are no video controllers here - * for all func of p_slot - */ - while (func && !rc) { - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Check the Class Code */ - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - if (rc) - return -ENODEV; - - if (class_code == PCI_BASE_CLASS_DISPLAY) { - /* Display/Video adapter (not supported) */ - rc = REMOVE_NOT_SUPPORTED; - } else { - /* See if it's a bridge */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if (rc) - return -ENODEV; - - /* If it's a bridge, check the VGA Enable bit */ - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); - if (rc) - return -ENODEV; - - /* If the VGA Enable bit is set, remove isn't supported */ - if (BCR & PCI_BRIDGE_CTL_VGA) { - rc = REMOVE_NOT_SUPPORTED; - } - } - } - - func = shpchp_slot_find(p_slot->bus, p_slot->device, index++); - } - - func = shpchp_slot_find(p_slot->bus, p_slot->device, 0); - if ((func != NULL) && !rc) { - rc = remove_board(func, p_slot->ctrl); - } else if (!rc) - rc = -ENODEV; - - if (p_slot) - update_slot_info(p_slot); - + rc = remove_board(p_slot); + update_slot_info(p_slot); return rc; } diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index f51a97d7611f..8f0a1667f2e6 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -148,20 +148,33 @@ int shpchp_configure_device(struct slot *p_slot) return 0; } -int shpchp_unconfigure_device(struct pci_func* func) +int shpchp_unconfigure_device(struct slot *p_slot) { int rc = 0; int j; + u8 bctl = 0; - dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus, - func->device, func->function); + dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device); for (j=0; j<8 ; j++) { - struct pci_dev* temp = pci_find_slot(func->bus, - (func->device << 3) | j); - if (temp) { - pci_remove_bus_device(temp); + struct pci_dev* temp = pci_find_slot(p_slot->bus, + (p_slot->device << 3) | j); + if (!temp) + continue; + if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + err("Cannot remove display device %s\n", + pci_name(temp)); + continue; + } + if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl); + if (bctl & PCI_BRIDGE_CTL_VGA) { + err("Cannot remove display device %s\n", + pci_name(temp)); + continue; + } } + pci_remove_bus_device(temp); } return rc; } -- cgit v1.2.3 From ee138334d5eb5ca662b2d69228420c1ccc051e0e Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:42 -0700 Subject: [PATCH] shpchp: miscellaneous cleanups Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 14 +--- drivers/pci/hotplug/shpchp_core.c | 12 +--- drivers/pci/hotplug/shpchp_ctrl.c | 31 ++++---- drivers/pci/hotplug/shpchp_hpc.c | 126 ++++++++------------------------- drivers/pci/hotplug/shpchp_pci.c | 4 -- drivers/pci/hotplug/shpchp_sysfs.c | 3 - drivers/pci/hotplug/shpchprm_acpi.c | 6 -- drivers/pci/hotplug/shpchprm_legacy.c | 4 -- drivers/pci/hotplug/shpchprm_nonacpi.c | 3 - 9 files changed, 46 insertions(+), 157 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 052c11f14a79..ade8ec145e1e 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -32,8 +32,6 @@ #include #include #include -#include -#include #include "pci_hotplug.h" #if !defined(MODULE) @@ -80,7 +78,7 @@ struct event_info { struct controller { struct controller *next; struct semaphore crit_sect; /* critical section semaphore */ - void * hpc_ctlr_handle; /* HPC controller handle */ + struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */ int num_slots; /* Number of slots on ctlr */ int slot_num_inc; /* 1 or -1 */ struct pci_dev *pci_dev; @@ -234,7 +232,7 @@ enum ctrl_offsets { SLOT11 = offsetof(struct ctrl_reg, slot11), SLOT12 = offsetof(struct ctrl_reg, slot12), }; -typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id); +typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id); struct php_ctlr_state_s { struct php_ctlr_state_s *pnext; struct pci_dev *pci_dev; @@ -347,11 +345,7 @@ enum php_ctlr_type { ACPI }; -int shpc_init( struct controller *ctrl, struct pci_dev *pdev, - php_intr_callback_t attention_button_callback, - php_intr_callback_t switch_change_callback, - php_intr_callback_t presence_change_callback, - php_intr_callback_t power_fault_callback); +int shpc_init( struct controller *ctrl, struct pci_dev *pdev); int shpc_get_ctlr_slot_config( struct controller *ctrl, int *num_ctlr_slots, @@ -364,8 +358,6 @@ struct hpc_ops { int (*power_on_slot ) (struct slot *slot); int (*slot_enable ) (struct slot *slot); int (*slot_disable ) (struct slot *slot); - int (*enable_all_slots) (struct slot *slot); - int (*pwr_on_all_slots) (struct slot *slot); int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed); int (*get_power_status) (struct slot *slot, u8 *status); int (*get_attention_status) (struct slot *slot, u8 *status); diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index b54edccbf2cc..28ed2dc9388a 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -27,17 +27,11 @@ * */ -#include #include #include #include #include -#include -#include -#include #include -#include -#include #include "shpchp.h" /* Global variables */ @@ -381,11 +375,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dbg("DRV_thread pid = %d\n", current->pid); - rc = shpc_init(ctrl, pdev, - (php_intr_callback_t) shpchp_handle_attention_button, - (php_intr_callback_t) shpchp_handle_switch_change, - (php_intr_callback_t) shpchp_handle_presence_change, - (php_intr_callback_t) shpchp_handle_power_fault); + rc = shpc_init(ctrl, pdev); if (rc) { dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME); goto err_out_free_ctrl; diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b6fde3565e55..8541180781e1 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -27,15 +27,9 @@ * */ -#include #include #include #include -#include -#include -#include -#include -#include #include #include #include "../pci.h" @@ -242,9 +236,10 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) /* The following routines constitute the bulk of the hotplug controller logic */ -static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum pci_bus_speed speed) +static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, + enum pci_bus_speed speed) { - u32 rc = 0; + int rc = 0; dbg("%s: change to speed %d\n", __FUNCTION__, speed); down(&ctrl->crit_sect); @@ -266,10 +261,11 @@ static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum p return rc; } -static u32 fix_bus_speed(struct controller *ctrl, struct slot *pslot, u8 flag, -enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp) +static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, + u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp, + enum pci_bus_speed msp) { - u32 rc = 0; + int rc = 0; if (flag != 0) { /* Other slots on the same bus are occupied */ if ( asp < bsp ) { @@ -308,11 +304,11 @@ enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp) * Configures board * */ -static u32 board_added(struct slot *p_slot) +static int board_added(struct slot *p_slot) { u8 hp_slot; u8 slots_not_empty = 0; - u32 rc = 0; + int rc = 0; enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; u8 pi, mode; struct controller *ctrl = p_slot->ctrl; @@ -580,11 +576,11 @@ err_exit: * remove_board - Turns off slot and LED's * */ -static u32 remove_board(struct slot *p_slot) +static int remove_board(struct slot *p_slot) { struct controller *ctrl = p_slot->ctrl; u8 hp_slot; - u32 rc; + int rc; if (shpchp_unconfigure_device(p_slot)) return(1); @@ -961,7 +957,6 @@ int shpchp_enable_slot (struct slot *p_slot) int shpchp_disable_slot (struct slot *p_slot) { u8 getstatus = 0; - u32 rc = 0; int ret = 0; if (!p_slot->ctrl) @@ -990,8 +985,8 @@ int shpchp_disable_slot (struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - rc = remove_board(p_slot); + ret = remove_board(p_slot); update_slot_info(p_slot); - return rc; + return ret; } diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index d55a9a7f8d2b..d46a47603386 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -27,17 +27,10 @@ * */ -#include #include #include #include -#include -#include -#include -#include -#include #include -#include #include "shpchp.h" #ifdef DEBUG @@ -282,7 +275,7 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds) static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u16 cmd_status; int retval = 0; u16 temp_word; @@ -328,7 +321,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) static int hpc_check_cmd_status(struct controller *ctrl) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; u16 cmd_status; int retval = 0; @@ -368,7 +361,7 @@ static int hpc_check_cmd_status(struct controller *ctrl) static int hpc_get_attention_status(struct slot *slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 atten_led_state; @@ -408,7 +401,7 @@ static int hpc_get_attention_status(struct slot *slot, u8 *status) static int hpc_get_power_status(struct slot * slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 slot_state; @@ -450,7 +443,7 @@ static int hpc_get_power_status(struct slot * slot, u8 *status) static int hpc_get_latch_status(struct slot *slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; @@ -473,7 +466,7 @@ static int hpc_get_latch_status(struct slot *slot, u8 *status) static int hpc_get_adapter_status(struct slot *slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 card_state; @@ -496,7 +489,7 @@ static int hpc_get_adapter_status(struct slot *slot, u8 *status) static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; DBG_ENTER_ROUTINE @@ -513,7 +506,7 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status, sec_bus_status; u8 m66_cap, pcix_cap, pi; @@ -594,7 +587,7 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u16 sec_bus_status; u8 pi; int retval = 0; @@ -623,7 +616,7 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) static int hpc_query_power_fault(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 pwr_fault_state, status; @@ -647,7 +640,7 @@ static int hpc_query_power_fault(struct slot * slot) static int hpc_set_attention_status(struct slot *slot, u8 value) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd = 0; int rc = 0; @@ -683,7 +676,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value) static void hpc_set_green_led_on(struct slot *slot) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; if (!slot->ctrl->hpc_ctlr_handle) { @@ -705,7 +698,7 @@ static void hpc_set_green_led_on(struct slot *slot) static void hpc_set_green_led_off(struct slot *slot) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; if (!slot->ctrl->hpc_ctlr_handle) { @@ -727,7 +720,7 @@ static void hpc_set_green_led_off(struct slot *slot) static void hpc_set_green_led_blink(struct slot *slot) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; if (!slot->ctrl->hpc_ctlr_handle) { @@ -754,7 +747,7 @@ int shpc_get_ctlr_slot_config(struct controller *ctrl, int *updown, /* physical_slot_num increament: 1 or -1 */ int *flags) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; DBG_ENTER_ROUTINE @@ -776,7 +769,7 @@ int shpc_get_ctlr_slot_config(struct controller *ctrl, static void hpc_release_ctlr(struct controller *ctrl) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; struct php_ctlr_state_s *p, *p_prev; DBG_ENTER_ROUTINE @@ -828,7 +821,7 @@ DBG_LEAVE_ROUTINE static int hpc_power_on_slot(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; int retval = 0; @@ -859,7 +852,7 @@ static int hpc_power_on_slot(struct slot * slot) static int hpc_slot_enable(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; int retval = 0; @@ -890,7 +883,7 @@ static int hpc_slot_enable(struct slot * slot) static int hpc_slot_disable(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; int retval = 0; @@ -920,51 +913,12 @@ static int hpc_slot_disable(struct slot * slot) return retval; } -static int hpc_enable_all_slots( struct slot *slot ) -{ - int retval = 0; - - DBG_ENTER_ROUTINE - - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - retval = shpc_write_cmd(slot, 0, SET_ENABLE_ALL); - if (retval) { - err("%s: Write command failed!\n", __FUNCTION__); - return -1; - } - - DBG_LEAVE_ROUTINE - - return retval; -} - -static int hpc_pwr_on_all_slots(struct slot *slot) -{ - int retval = 0; - - DBG_ENTER_ROUTINE - - retval = shpc_write_cmd(slot, 0, SET_PWR_ON_ALL); - - if (retval) { - err("%s: Write command failed!\n", __FUNCTION__); - return -1; - } - - DBG_LEAVE_ROUTINE - return retval; -} - static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { u8 slot_cmd; u8 pi; int retval = 0; - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; DBG_ENTER_ROUTINE @@ -1184,7 +1138,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; int retval = 0; u8 pi; @@ -1253,7 +1207,7 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; u16 sec_bus_status; int retval = 0; @@ -1367,8 +1321,6 @@ static struct hpc_ops shpchp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .slot_enable = hpc_slot_enable, .slot_disable = hpc_slot_disable, - .enable_all_slots = hpc_enable_all_slots, - .pwr_on_all_slots = hpc_pwr_on_all_slots, .set_bus_speed_mode = hpc_set_bus_speed_mode, .set_attention_status = hpc_set_attention_status, .get_power_status = hpc_get_power_status, @@ -1391,12 +1343,7 @@ static struct hpc_ops shpchp_hpc_ops = { .check_cmd_status = hpc_check_cmd_status, }; -int shpc_init(struct controller * ctrl, - struct pci_dev * pdev, - php_intr_callback_t attention_button_callback, - php_intr_callback_t switch_change_callback, - php_intr_callback_t presence_change_callback, - php_intr_callback_t power_fault_callback) +int shpc_init(struct controller * ctrl, struct pci_dev * pdev) { struct php_ctlr_state_s *php_ctlr, *p; void *instance_id = ctrl; @@ -1405,7 +1352,6 @@ int shpc_init(struct controller * ctrl, static int first = 1; u32 shpc_cap_offset, shpc_base_offset; u32 tempdword, slot_reg; - u16 vendor_id, device_id; u8 i; DBG_ENTER_ROUTINE @@ -1422,21 +1368,8 @@ int shpc_init(struct controller * ctrl, php_ctlr->pci_dev = pdev; /* save pci_dev in context */ - rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); - dbg("%s: Vendor ID: %x\n",__FUNCTION__, vendor_id); - if (rc) { - err("%s: unable to read PCI configuration data\n", __FUNCTION__); - goto abort_free_ctlr; - } - - rc = pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id); - dbg("%s: Device ID: %x\n",__FUNCTION__, device_id); - if (rc) { - err("%s: unable to read PCI configuration data\n", __FUNCTION__); - goto abort_free_ctlr; - } - - if ((vendor_id == PCI_VENDOR_ID_AMD) || (device_id == PCI_DEVICE_ID_AMD_GOLAM_7450)) { + if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == + PCI_DEVICE_ID_AMD_GOLAM_7450)) { shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */ } else { if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) { @@ -1514,11 +1447,10 @@ int shpc_init(struct controller * ctrl, php_ctlr->irq = pdev->irq; dbg("HPC interrupt = %d\n", php_ctlr->irq); - /* Save interrupt callback info */ - php_ctlr->attention_button_callback = attention_button_callback; - php_ctlr->switch_change_callback = switch_change_callback; - php_ctlr->presence_change_callback = presence_change_callback; - php_ctlr->power_fault_callback = power_fault_callback; + php_ctlr->attention_button_callback = shpchp_handle_attention_button, + php_ctlr->switch_change_callback = shpchp_handle_switch_change; + php_ctlr->presence_change_callback = shpchp_handle_presence_change; + php_ctlr->power_fault_callback = shpchp_handle_power_fault; php_ctlr->callback_instance_id = instance_id; /* Return PCI Controller Info */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 8f0a1667f2e6..b8e95acea3b6 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -27,13 +27,9 @@ * */ -#include #include #include #include -#include -#include -#include #include #include "../pci.h" #include "shpchp.h" diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index ce41719a88f7..807ef66899c7 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -26,12 +26,9 @@ * */ -#include #include #include #include -#include -#include #include #include "shpchp.h" diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 3be518c7d47a..17145e52223a 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -24,16 +24,10 @@ * */ -#include #include #include #include #include -#include -#include -#include -#include -#include #include #include #include diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index cfc6092e2afd..ed6c1254bf6f 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -27,15 +27,11 @@ * */ -#include #include #include #include #include -#include -#include #include "shpchp.h" -#include "shpchprm.h" int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index f36c188c23eb..d70fe5408417 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -32,10 +32,7 @@ #include #include #include -#include -#include #include "shpchp.h" -#include "shpchprm.h" int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { -- cgit v1.2.3 From 7c8942f993dc069db0e0327a343bbec8a6e96074 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:43 -0700 Subject: [PATCH] shpchp: reduce debug message verbosity Reduce the number of debug messages generated if shpchp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 6 ----- drivers/pci/hotplug/shpchp_core.c | 8 ------- drivers/pci/hotplug/shpchp_ctrl.c | 11 --------- drivers/pci/hotplug/shpchp_hpc.c | 47 ++++++--------------------------------- 4 files changed, 7 insertions(+), 65 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index ade8ec145e1e..dae1543a4e28 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -293,12 +293,9 @@ static inline struct slot *shpchp_find_slot (struct controller *ctrl, u8 device) p_slot = ctrl->slot; - dbg("p_slot = %p\n", p_slot); - while (p_slot && (p_slot->device != device)) { tmp_slot = p_slot; p_slot = p_slot->next; - dbg("In while loop, p_slot = %p\n", p_slot); } if (p_slot == NULL) { err("ERROR: shpchp_find_slot device=0x%x\n", device); @@ -313,8 +310,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl) DECLARE_WAITQUEUE(wait, current); int retval = 0; - dbg("%s : start\n",__FUNCTION__); - add_wait_queue(&ctrl->queue, &wait); if (!shpchp_poll_mode) { @@ -328,7 +323,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl) if (signal_pending(current)) retval = -EINTR; - dbg("%s : end\n", __FUNCTION__); return retval; } diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 28ed2dc9388a..6a2b4a0193aa 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -105,8 +105,6 @@ static int init_slots(struct controller *ctrl) u32 slot_number, sun; int result = -ENOMEM; - dbg("%s\n",__FUNCTION__); - number_of_slots = ctrl->num_slots; slot_device = ctrl->slot_device_offset; slot_number = ctrl->first_slot; @@ -373,15 +371,12 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } memset(ctrl, 0, sizeof(struct controller)); - dbg("DRV_thread pid = %d\n", current->pid); - rc = shpc_init(ctrl, pdev); if (rc) { dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME); goto err_out_free_ctrl; } - dbg("%s: controller initialization success\n", __FUNCTION__); ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ pci_set_drvdata(pdev, ctrl); @@ -488,8 +483,6 @@ static void __exit unload_shpchpd(void) cleanup_slots(ctrl); kfree (ctrl->pci_bus); - - dbg("%s: calling release_ctlr\n", __FUNCTION__); ctrl->hpc_ops->release_ctlr(ctrl); tctrl = ctrl; @@ -558,7 +551,6 @@ static void __exit shpcd_cleanup(void) dbg("unload_shpchpd()\n"); unload_shpchpd(); - dbg("pci_unregister_driver\n"); pci_unregister_driver(&shpc_driver); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 8541180781e1..58619359ad08 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -505,9 +505,7 @@ static int board_added(struct slot *p_slot) up(&ctrl->crit_sect); /* Wait for ~1 second */ - dbg("%s: before long_delay\n", __FUNCTION__); wait_for_ctrl_irq (ctrl); - dbg("%s: after long_delay\n", __FUNCTION__); dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); /* Check for a power fault */ @@ -666,13 +664,11 @@ static void shpchp_pushbutton_thread (unsigned long slot) p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (getstatus) { p_slot->state = POWEROFF_STATE; - dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); shpchp_disable_slot(p_slot); p_slot->state = STATIC_STATE; } else { p_slot->state = POWERON_STATE; - dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); if (shpchp_enable_slot(p_slot)) { /* Wait for exclusive access to hardware */ @@ -734,7 +730,6 @@ int shpchp_event_start_thread (void) err ("Can't start up our event thread\n"); return -1; } - dbg("Our event thread pid = %d\n", pid); return 0; } @@ -742,9 +737,7 @@ int shpchp_event_start_thread (void) void shpchp_event_stop_thread (void) { event_finished = 1; - dbg("event_thread finish command given\n"); up(&event_semaphore); - dbg("wait for event_thread to exit\n"); down(&event_exit); } @@ -776,7 +769,6 @@ static void interrupt_event_handler(struct controller *ctrl) u8 getstatus; struct slot *p_slot; - dbg("%s:\n", __FUNCTION__); while (change) { change = 0; @@ -788,9 +780,6 @@ static void interrupt_event_handler(struct controller *ctrl) p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("%s: hp_slot %d, p_slot %p\n", - __FUNCTION__, hp_slot, p_slot); - if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { dbg("%s: button cancel\n", __FUNCTION__); del_timer(&p_slot->task_event); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index d46a47603386..40905a6c8094 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -313,7 +313,6 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) * command. */ writew(temp_word, php_ctlr->creg + CMD); - dbg("%s: temp_word written %x\n", __FUNCTION__, temp_word); DBG_LEAVE_ROUTINE return retval; @@ -789,10 +788,8 @@ static void hpc_release_ctlr(struct controller *ctrl) } } if (php_ctlr->pci_dev) { - dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); iounmap(php_ctlr->creg); release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0)); - dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); php_ctlr->pci_dev = NULL; } @@ -1043,18 +1040,13 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) if (!intr_loc) return IRQ_NONE; - dbg("%s: shpc_isr proceeds\n", __FUNCTION__); dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc); if(!shpchp_poll_mode) { /* Mask Global Interrupt Mask - see implementation note on p. 139 */ /* of SHPC spec rev 1.0*/ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: Before masking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword |= 0x00000001; - dbg("%s: After masking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); intr_loc2 = readl(php_ctlr->creg + INTR_LOC); @@ -1068,11 +1060,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) * Detect bit in Controller SERR-INT register */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: Before clearing CCIP, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword &= 0xfffeffff; - dbg("%s: After clearing CCIP, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); wake_up_interruptible(&ctrl->queue); } @@ -1080,11 +1068,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) if ((intr_loc = (intr_loc >> 1)) == 0) { /* Unmask Global Interrupt Mask */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: 1-Before unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword &= 0xfffffffe; - dbg("%s: 1-After unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); return IRQ_NONE; @@ -1094,11 +1078,9 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* To find out which slot has interrupt pending */ if ((intr_loc >> hp_slot) & 0x01) { temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot)); - dbg("%s: Slot %x with intr, temp_dword = %x\n", - __FUNCTION__, hp_slot, temp_dword); + dbg("%s: Slot %x with intr, slot register = %x\n", + __FUNCTION__, hp_slot, temp_dword); temp_byte = (temp_dword >> 16) & 0xFF; - dbg("%s: Slot with intr, temp_byte = %x\n", - __FUNCTION__, temp_byte); if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08)) schedule_flag += php_ctlr->switch_change_callback( hp_slot, php_ctlr->callback_instance_id); @@ -1114,8 +1096,6 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* Clear all slot events */ temp_dword = 0xe01f3fff; - dbg("%s: Clearing slot events, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot)); intr_loc2 = readl(php_ctlr->creg + INTR_LOC); @@ -1125,11 +1105,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) if (!shpchp_poll_mode) { /* Unmask Global Interrupt Mask */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword &= 0xfffffffe; - dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); } @@ -1402,7 +1378,8 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) err("%s : pci_read_config_dword failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: offset %d: tempdword %x\n", __FUNCTION__,i, tempdword); + dbg("%s: offset %d: value %x\n", __FUNCTION__,i, + tempdword); } } @@ -1411,13 +1388,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) first = 0; } - dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn), pdev->irq); - for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++) - if (pci_resource_len(pdev, rc) > 0) - dbg("pci resource[%d] start=0x%lx(len=0x%lx), shpc_base_offset %x\n", rc, - pci_resource_start(pdev, rc), pci_resource_len(pdev, rc), shpc_base_offset); - info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, pdev->subsystem_device); @@ -1437,7 +1407,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) goto abort_free_ctlr; } dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg); - dbg("%s: physical addr %p\n", __FUNCTION__, (void*)pci_resource_start(pdev, 0)); init_MUTEX(&ctrl->crit_sect); /* Setup wait queue */ @@ -1445,8 +1414,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) /* Find the IRQ */ php_ctlr->irq = pdev->irq; - dbg("HPC interrupt = %d\n", php_ctlr->irq); - php_ctlr->attention_button_callback = shpchp_handle_attention_button, php_ctlr->switch_change_callback = shpchp_handle_switch_change; php_ctlr->presence_change_callback = shpchp_handle_presence_change; @@ -1488,7 +1455,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) if (rc) { info("Can't get msi for the hotplug controller\n"); info("Use INTx for the hotplug controller\n"); - dbg("%s: rc = %x\n", __FUNCTION__, rc); } else php_ctlr->irq = pdev->irq; @@ -1499,8 +1465,10 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) goto abort_free_ctlr; } } + dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __FUNCTION__, + pdev->bus->number, PCI_SLOT(pdev->devfn), + PCI_FUNC(pdev->devfn), pdev->irq); get_hp_hw_control_from_firmware(pdev); - dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__); /* Add this HPC instance into the HPC list */ spin_lock(&list_lock); @@ -1539,7 +1507,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); } - dbg("%s: Leaving shpc_init\n", __FUNCTION__); DBG_LEAVE_ROUTINE return 0; -- cgit v1.2.3 From c2608a111b621d5cf0e4c2876d79e67333ce5341 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:44 -0700 Subject: [PATCH] shpchp: fix oops at driver unload At unload time, the shpchp driver does not remove sysfs files it had created in the driver's probe entry point. This patch fixes this problem. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 1 + drivers/pci/hotplug/shpchp_core.c | 1 + drivers/pci/hotplug/shpchp_sysfs.c | 5 +++++ 3 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index dae1543a4e28..abe2cf411e68 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -173,6 +173,7 @@ extern void get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp); extern int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum); +extern void shpchp_remove_ctrl_files(struct controller *ctrl); /* Global variables */ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 6a2b4a0193aa..63628e01dd43 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -480,6 +480,7 @@ static void __exit unload_shpchpd(void) ctrl = shpchp_ctrl_list; while (ctrl) { + shpchp_remove_ctrl_files(ctrl); cleanup_slots(ctrl); kfree (ctrl->pci_bus); diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index 807ef66899c7..f5cfbf2c047c 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -89,3 +89,8 @@ void shpchp_create_ctrl_files (struct controller *ctrl) { device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl); } + +void shpchp_remove_ctrl_files(struct controller *ctrl) +{ + device_remove_file(&ctrl->pci_dev->dev, &dev_attr_ctrl); +} -- cgit v1.2.3 From a1720fdbd0f90e64668a59a304d01c5ba001b450 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Oct 2005 21:31:36 +0100 Subject: [PATCH] PCI: Fixup PCI driver shutdown Add a warning to pci driver registration code so that we know whether we have drivers using the obsolete driver shutdown method. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-driver.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 0d0d533894e0..f906f1a8fe6a 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -377,6 +377,10 @@ int pci_register_driver(struct pci_driver *drv) * the pci shutdown function, this test can go away. */ if (!drv->driver.shutdown) drv->driver.shutdown = pci_device_shutdown; + else + printk(KERN_WARNING "Warning: PCI driver %s has a struct " + "device_driver shutdown method, please update!\n", + drv->name); drv->driver.owner = drv->owner; drv->driver.kobj.ktype = &pci_driver_kobj_type; -- cgit v1.2.3 From 5457b6a6013516a73b8f48ec1adb9984b577a5c1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Oct 2005 21:32:46 +0100 Subject: [PATCH] PCI: Convert megaraid to use pci_driver shutdown method Convert megaraid to use pci_driver's shutdown method rather than the generic device_driver shutdown method. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/megaraid/megaraid_mbox.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index d47be8e0ea3a..c9e743ba09ec 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -76,7 +76,7 @@ static void megaraid_exit(void); static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *); static void megaraid_detach_one(struct pci_dev *); -static void megaraid_mbox_shutdown(struct device *); +static void megaraid_mbox_shutdown(struct pci_dev *); static int megaraid_io_attach(adapter_t *); static void megaraid_io_detach(adapter_t *); @@ -369,9 +369,7 @@ static struct pci_driver megaraid_pci_driver_g = { .id_table = pci_id_table_g, .probe = megaraid_probe_one, .remove = __devexit_p(megaraid_detach_one), - .driver = { - .shutdown = megaraid_mbox_shutdown, - } + .shutdown = megaraid_mbox_shutdown, }; @@ -673,9 +671,9 @@ megaraid_detach_one(struct pci_dev *pdev) * Shutdown notification, perform flush cache */ static void -megaraid_mbox_shutdown(struct device *device) +megaraid_mbox_shutdown(struct pci_dev *pdev) { - adapter_t *adapter = pci_get_drvdata(to_pci_dev(device)); + adapter_t *adapter = pci_get_drvdata(pdev); static int counter; if (!adapter) { -- cgit v1.2.3 From 8e5dce35221850759671b2847a2e51030f7626bd Mon Sep 17 00:00:00 2001 From: Kristen Accardi Date: Tue, 18 Oct 2005 17:21:40 -0700 Subject: [PATCH] acpiphp: allocate resources for adapters with bridges Allocate resources for adapters with bridges on them. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/acpiphp_glue.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 424e7de181ae..8e21f6ab89a1 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -58,6 +58,9 @@ static LIST_HEAD(bridge_list); static void handle_hotplug_event_bridge (acpi_handle, u32, void *); static void handle_hotplug_event_func (acpi_handle, u32, void *); +static void acpiphp_sanitize_bus(struct pci_bus *bus); +static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus); + /* * initialization & terminatation routines @@ -796,8 +799,13 @@ static int enable_device(struct acpiphp_slot *slot) } } + pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); + acpiphp_sanitize_bus(bus); + pci_enable_bridges(bus); pci_bus_add_devices(bus); + acpiphp_set_hpp_values(DEVICE_ACPI_HANDLE(&bus->self->dev), bus); + acpiphp_configure_ioapics(DEVICE_ACPI_HANDLE(&bus->self->dev)); /* associate pci_dev to our representation */ list_for_each (l, &slot->funcs) { -- cgit v1.2.3 From 8f7020d36374dda9366fee1343f8eacfe8f5e641 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Oct 2005 11:57:38 -0700 Subject: [PATCH] kernel-doc: PCI fixes PCI: add descriptions for missing function parameters. Eliminate all kernel-doc warnings here. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/pci/msi.c | 2 ++ drivers/pci/pci-driver.c | 13 +++++++++---- drivers/pci/pci.c | 7 ++++--- drivers/pci/probe.c | 1 + 4 files changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index ee8677bda950..a2033552423c 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -575,6 +575,8 @@ static int msi_capability_init(struct pci_dev *dev) /** * msix_capability_init - configure device's MSI-X capability * @dev: pointer to the pci_dev data structure of MSI-X device function + * @entries: pointer to an array of struct msix_entry entries + * @nvec: number of @entries * * Setup the MSI-X capability structure of device function with a * single MSI-X vector. A return of zero indicates the successful setup of diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index f906f1a8fe6a..8972e6a3aac0 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -26,7 +26,10 @@ struct pci_dynid { #ifdef CONFIG_HOTPLUG /** - * store_new_id + * store_new_id - add a new PCI device ID to this driver and re-probe devices + * @driver: target device driver + * @buf: buffer for scanning device ID data + * @count: input size * * Adds a new dynamic pci device ID to this driver, * and causes the driver to probe for all devices again. @@ -194,8 +197,10 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, /** * __pci_device_probe() + * @drv: driver to call to check if it wants the PCI device + * @pci_dev: PCI device being probed * - * returns 0 on success, else error. + * returns 0 on success, else error. * side-effect: pci_dev->driver is set to drv when drv claims pci_dev. */ static int @@ -440,11 +445,11 @@ pci_dev_driver(const struct pci_dev *dev) /** * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure - * @ids: array of PCI device id structures to search in * @dev: the PCI device structure to match against + * @drv: the device driver to search for matching PCI device id structures * * Used by a driver to check whether a PCI device present in the - * system is in its list of supported devices.Returns the matching + * system is in its list of supported devices. Returns the matching * pci_device_id structure or %NULL if there is no match. */ static int pci_bus_match(struct device *dev, struct device_driver *drv) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 39bdb938521d..61b855c99e39 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -252,6 +252,8 @@ pci_restore_bars(struct pci_dev *dev) pci_update_resource(dev, &dev->resource[i], i); } +int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); + /** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to be suspended @@ -266,7 +268,6 @@ pci_restore_bars(struct pci_dev *dev) * -EIO if device does not support PCI PM. * 0 if we can successfully change the power state. */ -int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { @@ -808,8 +809,8 @@ pci_clear_mwi(struct pci_dev *dev) /** * pci_intx - enables/disables PCI INTx for device dev - * @dev: the PCI device to operate on - * @enable: boolean + * @pdev: the PCI device to operate on + * @enable: boolean: whether to enable or disable PCI INTx * * Enables/disables PCI INTx for device dev */ diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 005786416bb5..fce2cb2112d8 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -669,6 +669,7 @@ static void pci_release_dev(struct device *dev) /** * pci_cfg_space_size - get the configuration space size of the PCI device. + * @dev: PCI device * * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices * have 4096 bytes. Even if the device is capable, that doesn't mean we can -- cgit v1.2.3 From a74968f8c3b1166cfe0942901b56165f06ab6f60 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 15:37:23 -0700 Subject: [IB] umad: Fix device lifetime problems Move ib_umad module to using cdev_alloc() and class_device_create() so that we can handle device lifetime properly. Now we can make sure we keep all of our data structures around until the last way to reach them is gone. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 268 ++++++++++++++++++++++--------------- 1 file changed, 159 insertions(+), 109 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 17ec0a19dbc0..9e49816d7282 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -64,18 +64,39 @@ enum { IB_UMAD_MINOR_BASE = 0 }; +/* + * Our lifetime rules for these structs are the following: each time a + * device special file is opened, we look up the corresponding struct + * ib_umad_port by minor in the umad_port[] table while holding the + * port_lock. If this lookup succeeds, we take a reference on the + * ib_umad_port's struct ib_umad_device while still holding the + * port_lock; if the lookup fails, we fail the open(). We drop these + * references in the corresponding close(). + * + * In addition to references coming from open character devices, there + * is one more reference to each ib_umad_device representing the + * module's reference taken when allocating the ib_umad_device in + * ib_umad_add_one(). + * + * When destroying an ib_umad_device, we clear all of its + * ib_umad_ports from umad_port[] while holding port_lock before + * dropping the module's reference to the ib_umad_device. This is + * always safe because any open() calls will either succeed and obtain + * a reference before we clear the umad_port[] entries, or fail after + * we clear the umad_port[] entries. + */ + struct ib_umad_port { - int devnum; - struct cdev dev; - struct class_device class_dev; + struct cdev *dev; + struct class_device *class_dev; - int sm_devnum; - struct cdev sm_dev; - struct class_device sm_class_dev; + struct cdev *sm_dev; + struct class_device *sm_class_dev; struct semaphore sm_sem; struct ib_device *ib_dev; struct ib_umad_device *umad_dev; + int dev_num; u8 port_num; }; @@ -102,13 +123,25 @@ struct ib_umad_packet { struct ib_user_mad mad; }; +static struct class *umad_class; + static const dev_t base_dev = MKDEV(IB_UMAD_MAJOR, IB_UMAD_MINOR_BASE); -static spinlock_t map_lock; + +static DEFINE_SPINLOCK(port_lock); +static struct ib_umad_port *umad_port[IB_UMAD_MAX_PORTS]; static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS * 2); static void ib_umad_add_one(struct ib_device *device); static void ib_umad_remove_one(struct ib_device *device); +static void ib_umad_release_dev(struct kref *ref) +{ + struct ib_umad_device *dev = + container_of(ref, struct ib_umad_device, ref); + + kfree(dev); +} + static int queue_packet(struct ib_umad_file *file, struct ib_mad_agent *agent, struct ib_umad_packet *packet) @@ -534,13 +567,23 @@ static long ib_umad_ioctl(struct file *filp, unsigned int cmd, static int ib_umad_open(struct inode *inode, struct file *filp) { - struct ib_umad_port *port = - container_of(inode->i_cdev, struct ib_umad_port, dev); + struct ib_umad_port *port; struct ib_umad_file *file; + spin_lock(&port_lock); + port = umad_port[iminor(inode) - IB_UMAD_MINOR_BASE]; + if (port) + kref_get(&port->umad_dev->ref); + spin_unlock(&port_lock); + + if (!port) + return -ENXIO; + file = kzalloc(sizeof *file, GFP_KERNEL); - if (!file) + if (!file) { + kref_put(&port->umad_dev->ref, ib_umad_release_dev); return -ENOMEM; + } spin_lock_init(&file->recv_lock); init_rwsem(&file->agent_mutex); @@ -556,6 +599,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp) static int ib_umad_close(struct inode *inode, struct file *filp) { struct ib_umad_file *file = filp->private_data; + struct ib_umad_device *dev = file->port->umad_dev; struct ib_umad_packet *packet, *tmp; int i; @@ -570,6 +614,8 @@ static int ib_umad_close(struct inode *inode, struct file *filp) kfree(file); + kref_put(&dev->ref, ib_umad_release_dev); + return 0; } @@ -586,30 +632,46 @@ static struct file_operations umad_fops = { static int ib_umad_sm_open(struct inode *inode, struct file *filp) { - struct ib_umad_port *port = - container_of(inode->i_cdev, struct ib_umad_port, sm_dev); + struct ib_umad_port *port; struct ib_port_modify props = { .set_port_cap_mask = IB_PORT_SM }; int ret; + spin_lock(&port_lock); + port = umad_port[iminor(inode) - IB_UMAD_MINOR_BASE - IB_UMAD_MAX_PORTS]; + if (port) + kref_get(&port->umad_dev->ref); + spin_unlock(&port_lock); + + if (!port) + return -ENXIO; + if (filp->f_flags & O_NONBLOCK) { - if (down_trylock(&port->sm_sem)) - return -EAGAIN; + if (down_trylock(&port->sm_sem)) { + ret = -EAGAIN; + goto fail; + } } else { - if (down_interruptible(&port->sm_sem)) - return -ERESTARTSYS; + if (down_interruptible(&port->sm_sem)) { + ret = -ERESTARTSYS; + goto fail; + } } ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props); if (ret) { up(&port->sm_sem); - return ret; + goto fail; } filp->private_data = port; return 0; + +fail: + kref_put(&port->umad_dev->ref, ib_umad_release_dev); + return ret; } static int ib_umad_sm_close(struct inode *inode, struct file *filp) @@ -623,6 +685,8 @@ static int ib_umad_sm_close(struct inode *inode, struct file *filp) ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props); up(&port->sm_sem); + kref_put(&port->umad_dev->ref, ib_umad_release_dev); + return ret; } @@ -642,6 +706,9 @@ static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { struct ib_umad_port *port = class_get_devdata(class_dev); + if (!port) + return -ENODEV; + return sprintf(buf, "%s\n", port->ib_dev->name); } static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); @@ -650,38 +717,13 @@ static ssize_t show_port(struct class_device *class_dev, char *buf) { struct ib_umad_port *port = class_get_devdata(class_dev); + if (!port) + return -ENODEV; + return sprintf(buf, "%d\n", port->port_num); } static CLASS_DEVICE_ATTR(port, S_IRUGO, show_port, NULL); -static void ib_umad_release_dev(struct kref *ref) -{ - struct ib_umad_device *dev = - container_of(ref, struct ib_umad_device, ref); - - kfree(dev); -} - -static void ib_umad_release_port(struct class_device *class_dev) -{ - struct ib_umad_port *port = class_get_devdata(class_dev); - - if (class_dev == &port->class_dev) { - cdev_del(&port->dev); - clear_bit(port->devnum, dev_map); - } else { - cdev_del(&port->sm_dev); - clear_bit(port->sm_devnum, dev_map); - } - - kref_put(&port->umad_dev->ref, ib_umad_release_dev); -} - -static struct class umad_class = { - .name = "infiniband_mad", - .release = ib_umad_release_port -}; - static ssize_t show_abi_version(struct class *class, char *buf) { return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION); @@ -691,89 +733,102 @@ static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL); static int ib_umad_init_port(struct ib_device *device, int port_num, struct ib_umad_port *port) { - spin_lock(&map_lock); - port->devnum = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS); - if (port->devnum >= IB_UMAD_MAX_PORTS) { - spin_unlock(&map_lock); + spin_lock(&port_lock); + port->dev_num = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS); + if (port->dev_num >= IB_UMAD_MAX_PORTS) { + spin_unlock(&port_lock); return -1; } - port->sm_devnum = find_next_zero_bit(dev_map, IB_UMAD_MAX_PORTS * 2, IB_UMAD_MAX_PORTS); - if (port->sm_devnum >= IB_UMAD_MAX_PORTS * 2) { - spin_unlock(&map_lock); - return -1; - } - set_bit(port->devnum, dev_map); - set_bit(port->sm_devnum, dev_map); - spin_unlock(&map_lock); + set_bit(port->dev_num, dev_map); + spin_unlock(&port_lock); port->ib_dev = device; port->port_num = port_num; init_MUTEX(&port->sm_sem); - cdev_init(&port->dev, &umad_fops); - port->dev.owner = THIS_MODULE; - kobject_set_name(&port->dev.kobj, "umad%d", port->devnum); - if (cdev_add(&port->dev, base_dev + port->devnum, 1)) + port->dev = cdev_alloc(); + if (!port->dev) return -1; - - port->class_dev.class = &umad_class; - port->class_dev.dev = device->dma_device; - port->class_dev.devt = port->dev.dev; - - snprintf(port->class_dev.class_id, BUS_ID_SIZE, "umad%d", port->devnum); - - if (class_device_register(&port->class_dev)) + port->dev->owner = THIS_MODULE; + port->dev->ops = &umad_fops; + kobject_set_name(&port->dev->kobj, "umad%d", port->dev_num); + if (cdev_add(port->dev, base_dev + port->dev_num, 1)) goto err_cdev; - class_set_devdata(&port->class_dev, port); - kref_get(&port->umad_dev->ref); + port->class_dev = class_device_create(umad_class, port->dev->dev, + device->dma_device, + "umad%d", port->dev_num); + if (IS_ERR(port->class_dev)) + goto err_cdev; - if (class_device_create_file(&port->class_dev, &class_device_attr_ibdev)) + if (class_device_create_file(port->class_dev, &class_device_attr_ibdev)) goto err_class; - if (class_device_create_file(&port->class_dev, &class_device_attr_port)) + if (class_device_create_file(port->class_dev, &class_device_attr_port)) goto err_class; - cdev_init(&port->sm_dev, &umad_sm_fops); - port->sm_dev.owner = THIS_MODULE; - kobject_set_name(&port->dev.kobj, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS); - if (cdev_add(&port->sm_dev, base_dev + port->sm_devnum, 1)) - return -1; - - port->sm_class_dev.class = &umad_class; - port->sm_class_dev.dev = device->dma_device; - port->sm_class_dev.devt = port->sm_dev.dev; - - snprintf(port->sm_class_dev.class_id, BUS_ID_SIZE, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS); + port->sm_dev = cdev_alloc(); + if (!port->sm_dev) + goto err_class; + port->sm_dev->owner = THIS_MODULE; + port->sm_dev->ops = &umad_sm_fops; + kobject_set_name(&port->dev->kobj, "issm%d", port->dev_num); + if (cdev_add(port->sm_dev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1)) + goto err_sm_cdev; - if (class_device_register(&port->sm_class_dev)) + port->sm_class_dev = class_device_create(umad_class, port->sm_dev->dev, + device->dma_device, + "issm%d", port->dev_num); + if (IS_ERR(port->sm_class_dev)) goto err_sm_cdev; - class_set_devdata(&port->sm_class_dev, port); - kref_get(&port->umad_dev->ref); + class_set_devdata(port->class_dev, port); + class_set_devdata(port->sm_class_dev, port); - if (class_device_create_file(&port->sm_class_dev, &class_device_attr_ibdev)) + if (class_device_create_file(port->sm_class_dev, &class_device_attr_ibdev)) goto err_sm_class; - if (class_device_create_file(&port->sm_class_dev, &class_device_attr_port)) + if (class_device_create_file(port->sm_class_dev, &class_device_attr_port)) goto err_sm_class; + spin_lock(&port_lock); + umad_port[port->dev_num] = port; + spin_unlock(&port_lock); + return 0; err_sm_class: - class_device_unregister(&port->sm_class_dev); + class_device_destroy(umad_class, port->sm_dev->dev); err_sm_cdev: - cdev_del(&port->sm_dev); + cdev_del(port->sm_dev); err_class: - class_device_unregister(&port->class_dev); + class_device_destroy(umad_class, port->dev->dev); err_cdev: - cdev_del(&port->dev); - clear_bit(port->devnum, dev_map); + cdev_del(port->dev); + clear_bit(port->dev_num, dev_map); return -1; } +static void ib_umad_kill_port(struct ib_umad_port *port) +{ + class_set_devdata(port->class_dev, NULL); + class_set_devdata(port->sm_class_dev, NULL); + + class_device_destroy(umad_class, port->dev->dev); + class_device_destroy(umad_class, port->sm_dev->dev); + + cdev_del(port->dev); + cdev_del(port->sm_dev); + + spin_lock(&port_lock); + umad_port[port->dev_num] = NULL; + spin_unlock(&port_lock); + + clear_bit(port->dev_num, dev_map); +} + static void ib_umad_add_one(struct ib_device *device) { struct ib_umad_device *umad_dev; @@ -809,10 +864,8 @@ static void ib_umad_add_one(struct ib_device *device) return; err: - while (--i >= s) { - class_device_unregister(&umad_dev->port[i - s].class_dev); - class_device_unregister(&umad_dev->port[i - s].sm_class_dev); - } + while (--i >= s) + ib_umad_kill_port(&umad_dev->port[i]); kref_put(&umad_dev->ref, ib_umad_release_dev); } @@ -825,10 +878,8 @@ static void ib_umad_remove_one(struct ib_device *device) if (!umad_dev) return; - for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i) { - class_device_unregister(&umad_dev->port[i].class_dev); - class_device_unregister(&umad_dev->port[i].sm_class_dev); - } + for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i) + ib_umad_kill_port(&umad_dev->port[i]); kref_put(&umad_dev->ref, ib_umad_release_dev); } @@ -837,8 +888,6 @@ static int __init ib_umad_init(void) { int ret; - spin_lock_init(&map_lock); - ret = register_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2, "infiniband_mad"); if (ret) { @@ -846,13 +895,14 @@ static int __init ib_umad_init(void) goto out; } - ret = class_register(&umad_class); - if (ret) { + umad_class = class_create(THIS_MODULE, "infiniband_mad"); + if (IS_ERR(umad_class)) { + ret = PTR_ERR(umad_class); printk(KERN_ERR "user_mad: couldn't create class infiniband_mad\n"); goto out_chrdev; } - ret = class_create_file(&umad_class, &class_attr_abi_version); + ret = class_create_file(umad_class, &class_attr_abi_version); if (ret) { printk(KERN_ERR "user_mad: couldn't create abi_version attribute\n"); goto out_class; @@ -867,7 +917,7 @@ static int __init ib_umad_init(void) return 0; out_class: - class_unregister(&umad_class); + class_destroy(umad_class); out_chrdev: unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2); @@ -879,7 +929,7 @@ out: static void __exit ib_umad_cleanup(void) { ib_unregister_client(&umad_client); - class_unregister(&umad_class); + class_destroy(umad_class); unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2); } -- cgit v1.2.3 From 70a30e16a8a9d22396a4d1e96af86e43594df584 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 15:38:26 -0700 Subject: [IB] uverbs: Fix device lifetime problems Move ib_uverbs module to using cdev_alloc() and class_device_create() so that we can handle device lifetime properly. Now we can make sure we keep all of our data structures around until the last way to reach them is gone. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 36 +++++- drivers/infiniband/core/uverbs_cmd.c | 38 +------ drivers/infiniband/core/uverbs_main.c | 203 ++++++++++++++++++++++++---------- 3 files changed, 182 insertions(+), 95 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 63c8085c0c98..031cdf3c066d 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -39,20 +39,38 @@ #ifndef UVERBS_H #define UVERBS_H -/* Include device.h and fs.h until cdev.h is self-sufficient */ -#include -#include -#include #include #include #include #include +/* + * Our lifetime rules for these structs are the following: + * + * struct ib_uverbs_device: One reference is held by the module and + * released in ib_uverbs_remove_one(). Another reference is taken by + * ib_uverbs_open() each time the character special file is opened, + * and released in ib_uverbs_release_file() when the file is released. + * + * struct ib_uverbs_file: One reference is held by the VFS and + * released when the file is closed. Another reference is taken when + * an asynchronous event queue file is created and released when the + * event file is closed. + * + * struct ib_uverbs_event_file: One reference is held by the VFS and + * released when the file is closed. For asynchronous event files, + * another reference is held by the corresponding main context file + * and released when that file is closed. For completion event files, + * a reference is taken when a CQ is created that uses the file, and + * released when the CQ is destroyed. + */ + struct ib_uverbs_device { + struct kref ref; int devnum; - struct cdev dev; - struct class_device class_dev; + struct cdev *dev; + struct class_device *class_dev; struct ib_device *ib_dev; int num_comp_vectors; }; @@ -115,6 +133,12 @@ struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file, void ib_uverbs_release_event_file(struct kref *ref); struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd); +void ib_uverbs_release_ucq(struct ib_uverbs_file *file, + struct ib_uverbs_event_file *ev_file, + struct ib_ucq_object *uobj); +void ib_uverbs_release_uevent(struct ib_uverbs_file *file, + struct ib_uevent_object *uobj); + void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context); void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr); diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 14583bb6e2c0..8c89abc8c764 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -35,6 +35,7 @@ */ #include +#include #include @@ -114,7 +115,7 @@ ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, kref_get(&file->async_file->ref); kref_get(&file->ref); - file->ucontext = ucontext; + file->ucontext = ucontext; fd_install(resp.async_fd, filp); @@ -761,7 +762,6 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, struct ib_cq *cq; struct ib_ucq_object *uobj; struct ib_uverbs_event_file *ev_file; - struct ib_uverbs_event *evt, *tmp; u64 user_handle; int ret = -EINVAL; @@ -790,23 +790,7 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - if (ev_file) { - spin_lock_irq(&ev_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&ev_file->lock); - - kref_put(&ev_file->ref, ib_uverbs_release_event_file); - } - - spin_lock_irq(&file->async_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&file->async_file->lock); + ib_uverbs_release_ucq(file, ev_file, uobj); resp.comp_events_reported = uobj->comp_events_reported; resp.async_events_reported = uobj->async_events_reported; @@ -1043,7 +1027,6 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, struct ib_uverbs_destroy_qp_resp resp; struct ib_qp *qp; struct ib_uevent_object *uobj; - struct ib_uverbs_event *evt, *tmp; int ret = -EINVAL; if (copy_from_user(&cmd, buf, sizeof cmd)) @@ -1069,12 +1052,7 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&file->async_file->lock); + ib_uverbs_release_uevent(file, uobj); resp.events_reported = uobj->events_reported; @@ -1741,7 +1719,6 @@ ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, struct ib_uverbs_destroy_srq_resp resp; struct ib_srq *srq; struct ib_uevent_object *uobj; - struct ib_uverbs_event *evt, *tmp; int ret = -EINVAL; if (copy_from_user(&cmd, buf, sizeof cmd)) @@ -1767,12 +1744,7 @@ ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&file->async_file->lock); + ib_uverbs_release_uevent(file, uobj); resp.events_reported = uobj->events_reported; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 251c752a7ae6..ac08d2c93ea1 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -44,6 +44,7 @@ #include #include #include +#include #include @@ -63,6 +64,8 @@ enum { #define IB_UVERBS_BASE_DEV MKDEV(IB_UVERBS_MAJOR, IB_UVERBS_BASE_MINOR) +static struct class *uverbs_class; + DECLARE_MUTEX(ib_uverbs_idr_mutex); DEFINE_IDR(ib_uverbs_pd_idr); DEFINE_IDR(ib_uverbs_mr_idr); @@ -73,6 +76,7 @@ DEFINE_IDR(ib_uverbs_qp_idr); DEFINE_IDR(ib_uverbs_srq_idr); static spinlock_t map_lock; +static struct ib_uverbs_device *dev_table[IB_UVERBS_MAX_DEVICES]; static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES); static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, @@ -110,7 +114,54 @@ static struct vfsmount *uverbs_event_mnt; static void ib_uverbs_add_one(struct ib_device *device); static void ib_uverbs_remove_one(struct ib_device *device); -static int ib_dealloc_ucontext(struct ib_ucontext *context) +static void ib_uverbs_release_dev(struct kref *ref) +{ + struct ib_uverbs_device *dev = + container_of(ref, struct ib_uverbs_device, ref); + + kfree(dev); +} + +void ib_uverbs_release_ucq(struct ib_uverbs_file *file, + struct ib_uverbs_event_file *ev_file, + struct ib_ucq_object *uobj) +{ + struct ib_uverbs_event *evt, *tmp; + + if (ev_file) { + spin_lock_irq(&ev_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&ev_file->lock); + + kref_put(&ev_file->ref, ib_uverbs_release_event_file); + } + + spin_lock_irq(&file->async_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&file->async_file->lock); +} + +void ib_uverbs_release_uevent(struct ib_uverbs_file *file, + struct ib_uevent_object *uobj) +{ + struct ib_uverbs_event *evt, *tmp; + + spin_lock_irq(&file->async_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&file->async_file->lock); +} + +static int ib_uverbs_cleanup_ucontext(struct ib_uverbs_file *file, + struct ib_ucontext *context) { struct ib_uobject *uobj, *tmp; @@ -129,26 +180,36 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) list_for_each_entry_safe(uobj, tmp, &context->qp_list, list) { struct ib_qp *qp = idr_find(&ib_uverbs_qp_idr, uobj->id); + struct ib_uevent_object *uevent = + container_of(uobj, struct ib_uevent_object, uobject); idr_remove(&ib_uverbs_qp_idr, uobj->id); ib_destroy_qp(qp); list_del(&uobj->list); - kfree(container_of(uobj, struct ib_uevent_object, uobject)); + ib_uverbs_release_uevent(file, uevent); + kfree(uevent); } list_for_each_entry_safe(uobj, tmp, &context->cq_list, list) { struct ib_cq *cq = idr_find(&ib_uverbs_cq_idr, uobj->id); + struct ib_uverbs_event_file *ev_file = cq->cq_context; + struct ib_ucq_object *ucq = + container_of(uobj, struct ib_ucq_object, uobject); idr_remove(&ib_uverbs_cq_idr, uobj->id); ib_destroy_cq(cq); list_del(&uobj->list); - kfree(container_of(uobj, struct ib_ucq_object, uobject)); + ib_uverbs_release_ucq(file, ev_file, ucq); + kfree(ucq); } list_for_each_entry_safe(uobj, tmp, &context->srq_list, list) { struct ib_srq *srq = idr_find(&ib_uverbs_srq_idr, uobj->id); + struct ib_uevent_object *uevent = + container_of(uobj, struct ib_uevent_object, uobject); idr_remove(&ib_uverbs_srq_idr, uobj->id); ib_destroy_srq(srq); list_del(&uobj->list); - kfree(container_of(uobj, struct ib_uevent_object, uobject)); + ib_uverbs_release_uevent(file, uevent); + kfree(uevent); } /* XXX Free MWs */ @@ -187,6 +248,8 @@ static void ib_uverbs_release_file(struct kref *ref) container_of(ref, struct ib_uverbs_file, ref); module_put(file->device->ib_dev->owner); + kref_put(&file->device->ref, ib_uverbs_release_dev); + kfree(file); } @@ -552,36 +615,58 @@ static int ib_uverbs_mmap(struct file *filp, struct vm_area_struct *vma) static int ib_uverbs_open(struct inode *inode, struct file *filp) { - struct ib_uverbs_device *dev = - container_of(inode->i_cdev, struct ib_uverbs_device, dev); + struct ib_uverbs_device *dev; struct ib_uverbs_file *file; + int ret; - if (!try_module_get(dev->ib_dev->owner)) - return -ENODEV; + spin_lock(&map_lock); + dev = dev_table[iminor(inode) - IB_UVERBS_BASE_MINOR]; + if (dev) + kref_get(&dev->ref); + spin_unlock(&map_lock); + + if (!dev) + return -ENXIO; + + if (!try_module_get(dev->ib_dev->owner)) { + ret = -ENODEV; + goto err; + } file = kmalloc(sizeof *file, GFP_KERNEL); if (!file) { - module_put(dev->ib_dev->owner); - return -ENOMEM; + ret = -ENOMEM; + goto err_module; } - file->device = dev; - file->ucontext = NULL; + file->device = dev; + file->ucontext = NULL; + file->async_file = NULL; kref_init(&file->ref); init_MUTEX(&file->mutex); filp->private_data = file; return 0; + +err_module: + module_put(dev->ib_dev->owner); + +err: + kref_put(&dev->ref, ib_uverbs_release_dev); + + return ret; } static int ib_uverbs_close(struct inode *inode, struct file *filp) { struct ib_uverbs_file *file = filp->private_data; - ib_dealloc_ucontext(file->ucontext); + ib_uverbs_cleanup_ucontext(file, file->ucontext); + + if (file->async_file) + kref_put(&file->async_file->ref, ib_uverbs_release_event_file); - kref_put(&file->async_file->ref, ib_uverbs_release_event_file); kref_put(&file->ref, ib_uverbs_release_file); return 0; @@ -610,8 +695,10 @@ static struct ib_client uverbs_client = { static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { - struct ib_uverbs_device *dev = - container_of(class_dev, struct ib_uverbs_device, class_dev); + struct ib_uverbs_device *dev = class_get_devdata(class_dev); + + if (!dev) + return -ENODEV; return sprintf(buf, "%s\n", dev->ib_dev->name); } @@ -619,28 +706,15 @@ static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); static ssize_t show_dev_abi_version(struct class_device *class_dev, char *buf) { - struct ib_uverbs_device *dev = - container_of(class_dev, struct ib_uverbs_device, class_dev); + struct ib_uverbs_device *dev = class_get_devdata(class_dev); + + if (!dev) + return -ENODEV; return sprintf(buf, "%d\n", dev->ib_dev->uverbs_abi_ver); } static CLASS_DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL); -static void ib_uverbs_release_class_dev(struct class_device *class_dev) -{ - struct ib_uverbs_device *dev = - container_of(class_dev, struct ib_uverbs_device, class_dev); - - cdev_del(&dev->dev); - clear_bit(dev->devnum, dev_map); - kfree(dev); -} - -static struct class uverbs_class = { - .name = "infiniband_verbs", - .release = ib_uverbs_release_class_dev -}; - static ssize_t show_abi_version(struct class *class, char *buf) { return sprintf(buf, "%d\n", IB_USER_VERBS_ABI_VERSION); @@ -660,6 +734,8 @@ static void ib_uverbs_add_one(struct ib_device *device) memset(uverbs_dev, 0, sizeof *uverbs_dev); + kref_init(&uverbs_dev->ref); + spin_lock(&map_lock); uverbs_dev->devnum = find_first_zero_bit(dev_map, IB_UVERBS_MAX_DEVICES); if (uverbs_dev->devnum >= IB_UVERBS_MAX_DEVICES) { @@ -672,40 +748,45 @@ static void ib_uverbs_add_one(struct ib_device *device) uverbs_dev->ib_dev = device; uverbs_dev->num_comp_vectors = 1; - if (device->mmap) - cdev_init(&uverbs_dev->dev, &uverbs_mmap_fops); - else - cdev_init(&uverbs_dev->dev, &uverbs_fops); - uverbs_dev->dev.owner = THIS_MODULE; - kobject_set_name(&uverbs_dev->dev.kobj, "uverbs%d", uverbs_dev->devnum); - if (cdev_add(&uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1)) + uverbs_dev->dev = cdev_alloc(); + if (!uverbs_dev->dev) goto err; + uverbs_dev->dev->owner = THIS_MODULE; + uverbs_dev->dev->ops = device->mmap ? &uverbs_mmap_fops : &uverbs_fops; + kobject_set_name(&uverbs_dev->dev->kobj, "uverbs%d", uverbs_dev->devnum); + if (cdev_add(uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1)) + goto err_cdev; - uverbs_dev->class_dev.class = &uverbs_class; - uverbs_dev->class_dev.dev = device->dma_device; - uverbs_dev->class_dev.devt = uverbs_dev->dev.dev; - snprintf(uverbs_dev->class_dev.class_id, BUS_ID_SIZE, "uverbs%d", uverbs_dev->devnum); - if (class_device_register(&uverbs_dev->class_dev)) + uverbs_dev->class_dev = class_device_create(uverbs_class, uverbs_dev->dev->dev, + device->dma_device, + "uverbs%d", uverbs_dev->devnum); + if (IS_ERR(uverbs_dev->class_dev)) goto err_cdev; - if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_ibdev)) + class_set_devdata(uverbs_dev->class_dev, uverbs_dev); + + if (class_device_create_file(uverbs_dev->class_dev, &class_device_attr_ibdev)) goto err_class; - if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_abi_version)) + if (class_device_create_file(uverbs_dev->class_dev, &class_device_attr_abi_version)) goto err_class; + spin_lock(&map_lock); + dev_table[uverbs_dev->devnum] = uverbs_dev; + spin_unlock(&map_lock); + ib_set_client_data(device, &uverbs_client, uverbs_dev); return; err_class: - class_device_unregister(&uverbs_dev->class_dev); + class_device_destroy(uverbs_class, uverbs_dev->dev->dev); err_cdev: - cdev_del(&uverbs_dev->dev); + cdev_del(uverbs_dev->dev); clear_bit(uverbs_dev->devnum, dev_map); err: - kfree(uverbs_dev); + kref_put(&uverbs_dev->ref, ib_uverbs_release_dev); return; } @@ -716,7 +797,16 @@ static void ib_uverbs_remove_one(struct ib_device *device) if (!uverbs_dev) return; - class_device_unregister(&uverbs_dev->class_dev); + class_set_devdata(uverbs_dev->class_dev, NULL); + class_device_destroy(uverbs_class, uverbs_dev->dev->dev); + cdev_del(uverbs_dev->dev); + + spin_lock(&map_lock); + dev_table[uverbs_dev->devnum] = NULL; + spin_unlock(&map_lock); + + clear_bit(uverbs_dev->devnum, dev_map); + kref_put(&uverbs_dev->ref, ib_uverbs_release_dev); } static struct super_block *uverbs_event_get_sb(struct file_system_type *fs_type, int flags, @@ -746,13 +836,14 @@ static int __init ib_uverbs_init(void) goto out; } - ret = class_register(&uverbs_class); - if (ret) { + uverbs_class = class_create(THIS_MODULE, "infiniband_verbs"); + if (IS_ERR(uverbs_class)) { + ret = PTR_ERR(uverbs_class); printk(KERN_ERR "user_verbs: couldn't create class infiniband_verbs\n"); goto out_chrdev; } - ret = class_create_file(&uverbs_class, &class_attr_abi_version); + ret = class_create_file(uverbs_class, &class_attr_abi_version); if (ret) { printk(KERN_ERR "user_verbs: couldn't create abi_version attribute\n"); goto out_class; @@ -786,7 +877,7 @@ out_fs: unregister_filesystem(&uverbs_event_fs); out_class: - class_unregister(&uverbs_class); + class_destroy(uverbs_class); out_chrdev: unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES); @@ -800,7 +891,7 @@ static void __exit ib_uverbs_cleanup(void) ib_unregister_client(&uverbs_client); mntput(uverbs_event_mnt); unregister_filesystem(&uverbs_event_fs); - class_unregister(&uverbs_class); + class_destroy(uverbs_class); unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES); idr_destroy(&ib_uverbs_pd_idr); idr_destroy(&ib_uverbs_mr_idr); -- cgit v1.2.3 From b6a1d5f88473138497d8694ddf174e8e91300068 Mon Sep 17 00:00:00 2001 From: "Martin J. Bligh" Date: Fri, 28 Oct 2005 15:14:44 -0700 Subject: [PATCH] e1000: remove warning about e1000_suspend e1000_suspend is only used under #ifdef CONFIG_PM. Move the declaration of it to be the same way, just like e1000_resume, otherwise gcc whines on compile. I offer as evidence: static struct pci_driver e1000_driver = { .name = e1000_driver_name, .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = __devexit_p(e1000_remove), /* Power Managment Hooks */ #ifdef CONFIG_PM .suspend = e1000_suspend, .resume = e1000_resume #endif }; Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6b72f6acdd54..a0023f357cb1 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4193,6 +4193,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) return 0; } +#ifdef CONFIG_PM static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -4289,7 +4290,6 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) return 0; } -#ifdef CONFIG_PM static int e1000_resume(struct pci_dev *pdev) { -- cgit v1.2.3 From a1bfcd97414d3e9b3c96f27d9b1a1e76c9543ba6 Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Fri, 28 Oct 2005 15:14:46 -0700 Subject: [PATCH] eepro.c: module_param_array cleanup num_params is unused (and unusable in this form). Signed-off-by: Florin Malita Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eepro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index dcb3028bb60f..1ce2c675b8a7 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1797,10 +1797,9 @@ MODULE_AUTHOR("Pascal Dupuis and others"); MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver"); MODULE_LICENSE("GPL"); -static int num_params; -module_param_array(io, int, &num_params, 0); -module_param_array(irq, int, &num_params, 0); -module_param_array(mem, int, &num_params, 0); +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param_array(mem, int, NULL, 0); module_param(autodetect, int, 0); MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)"); MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); -- cgit v1.2.3 From 46e178535836dcd7ef92f179218628d101892c59 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 28 Oct 2005 15:14:47 -0700 Subject: [PATCH] b44: fix suspend/resume Fix suspend/resume on b44 by freeing/reacquiring irq. Otherwise it hangs on resume. Signed-off-by: Pavel Machek Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 5485e3b1cd35..0ee3e27969c6 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2041,6 +2041,8 @@ static int b44_suspend(struct pci_dev *pdev, pm_message_t state) b44_free_rings(bp); spin_unlock_irq(&bp->lock); + + free_irq(dev->irq, dev); pci_disable_device(pdev); return 0; } @@ -2057,6 +2059,9 @@ static int b44_resume(struct pci_dev *pdev) if (!netif_running(dev)) return 0; + if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev)) + printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name); + spin_lock_irq(&bp->lock); b44_init_rings(bp); -- cgit v1.2.3 From a7ec15da65ab64c5f97beedc4ff21cf3e0ae71c0 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Fri, 28 Oct 2005 15:14:49 -0700 Subject: [PATCH] e1000: use vmalloc_node() Allocate node local tx and rx descriptors for the e1000 driver Signed-off-by: Ravikiran Thirumalai Cc: Christoph Lameter Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index a0023f357cb1..d97ad89f5dd2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1149,7 +1149,8 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, int size; size = sizeof(struct e1000_buffer) * txdr->count; - txdr->buffer_info = vmalloc(size); + + txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus)); if(!txdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit descriptor ring\n"); @@ -1366,7 +1367,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter, int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; - rxdr->buffer_info = vmalloc(size); + rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus)); if (!rxdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the receive descriptor ring\n"); -- cgit v1.2.3 From 63f57fb69b017230c77c40f1713e40885ae6d159 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 28 Oct 2005 15:14:51 -0700 Subject: [PATCH] revert "orinoco: Information leakage due to incorrect padding" Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index d3d4ec9e242e..70a3477a2061 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -490,7 +490,8 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - /* Check packet length, pad short packets, round up odd length */ + /* Length of the packet body */ + /* FIXME: what if the skb is smaller than this? */ len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN); skb = skb_padto(skb, len); if (skb == NULL) @@ -547,7 +548,8 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) p = skb->data; } - err = hermes_bap_pwrite(hw, USER_BAP, p, data_len, + /* Round up for odd length packets */ + err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), txfid, data_off); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", -- cgit v1.2.3 From 2c36ed22c6f64de94c6c3b7258dd7285bb093401 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 28 Oct 2005 15:14:52 -0700 Subject: [PATCH] Better fixup for the orinoco driver The latest kernel added a pretty ugly fix for the orinoco etherleak bug which contains bogus skb->len checks already done by the caller and causes copies of all odd sized frames (which are quite common) While the skb->len check should be ripped out the other fix is harder to do properly so I'm proposing for this the -mm tree only until next 2.6.x so that it gets tested. Instead of copying buffers around blindly this code implements a padding aware version of the hermes buffer writing function which does padding as the buffer is loaded and thus more cleanly and without bogus 1.5K copies. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/hermes.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/net/wireless/hermes.h | 2 ++ drivers/net/wireless/orinoco.c | 11 +++++++++-- 3 files changed, 49 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index eba0d9d2b7c5..579480dad374 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -444,6 +444,43 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, return err; } +/* Write a block of data to the chip's buffer with padding if + * neccessary, via the BAP. Synchronization/serialization is the + * caller's problem. len must be even. + * + * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + */ +int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if (len < 0 || len % 2 || data_len > len) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Transfer all the complete words of data */ + hermes_write_words(hw, dreg, buf, data_len/2); + /* If there is an odd byte left over pad and transfer it */ + if (data_len & 1) { + u8 end[2]; + end[1] = 0; + end[0] = ((unsigned char *)buf)[data_len - 1]; + hermes_write_words(hw, dreg, end, 1); + data_len ++; + } + /* Now send zeros for the padding */ + if (data_len < len) + hermes_clear_words(hw, dreg, (len - data_len) / 2); + /* Complete */ + out: + return err; +} + /* Read a Length-Type-Value record from the card. * * If length is NULL, we ignore the length read from the card, and @@ -531,6 +568,7 @@ EXPORT_SYMBOL(hermes_allocate); EXPORT_SYMBOL(hermes_bap_pread); EXPORT_SYMBOL(hermes_bap_pwrite); +EXPORT_SYMBOL(hermes_bap_pwrite_pad); EXPORT_SYMBOL(hermes_read_ltv); EXPORT_SYMBOL(hermes_write_ltv); diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index ad28e3294360..a6bd472d75d4 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -376,6 +376,8 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, u16 id, u16 offset); int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, u16 id, u16 offset); +int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, + unsigned data_len, unsigned len, u16 id, u16 offset); int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, u16 *length, void *buf); int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 70a3477a2061..488ab06fb79f 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -542,14 +542,21 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) stats->tx_errors++; goto fail; } + /* Actual xfer length - allow for padding */ + len = ALIGN(data_len, 2); + if (len < ETH_ZLEN - ETH_HLEN) + len = ETH_ZLEN - ETH_HLEN; } else { /* IEEE 802.3 frame */ data_len = len + ETH_HLEN; data_off = HERMES_802_3_OFFSET; p = skb->data; + /* Actual xfer length - round up for odd length packets */ + len = ALIGN(data_len, 2); + if (len < ETH_ZLEN) + len = ETH_ZLEN; } - /* Round up for odd length packets */ - err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), + err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len, txfid, data_off); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", -- cgit v1.2.3 From 977e74b5f60de3df9831897b726c16870878eee4 Mon Sep 17 00:00:00 2001 From: Ashutosh Naik Date: Fri, 28 Oct 2005 15:14:53 -0700 Subject: [PATCH] e1000: Fixes e1000_suspend warning when CONFIG_PM is not enabled drivers/net/e1000/e1000_main.c:3645: warning: `e1000_suspend' defined but not used Signed-off-by: Ashutosh Naik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d97ad89f5dd2..efbbda7cbcbf 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -191,8 +191,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); static int e1000_resume(struct pci_dev *pdev); #endif -- cgit v1.2.3 From 4cce3390c998600f6648e075e475cf8f6dd8cebe Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 16:38:15 -0700 Subject: [IB] fix up class_device_create() calls Fix class_device_create() calls to match the new prototype which takes a parent device pointer. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 4 ++-- drivers/infiniband/core/uverbs_main.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 9e49816d7282..97128e25f78b 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -755,7 +755,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, if (cdev_add(port->dev, base_dev + port->dev_num, 1)) goto err_cdev; - port->class_dev = class_device_create(umad_class, port->dev->dev, + port->class_dev = class_device_create(umad_class, NULL, port->dev->dev, device->dma_device, "umad%d", port->dev_num); if (IS_ERR(port->class_dev)) @@ -775,7 +775,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, if (cdev_add(port->sm_dev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1)) goto err_sm_cdev; - port->sm_class_dev = class_device_create(umad_class, port->sm_dev->dev, + port->sm_class_dev = class_device_create(umad_class, NULL, port->sm_dev->dev, device->dma_device, "issm%d", port->dev_num); if (IS_ERR(port->sm_class_dev)) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index ac08d2c93ea1..0eb38f479b39 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -757,7 +757,8 @@ static void ib_uverbs_add_one(struct ib_device *device) if (cdev_add(uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1)) goto err_cdev; - uverbs_dev->class_dev = class_device_create(uverbs_class, uverbs_dev->dev->dev, + uverbs_dev->class_dev = class_device_create(uverbs_class, NULL, + uverbs_dev->dev->dev, device->dma_device, "uverbs%d", uverbs_dev->devnum); if (IS_ERR(uverbs_dev->class_dev)) -- cgit v1.2.3 From 72f30b6f2f5f68dd426e9fe83817b882c2d04e50 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 27 Sep 2005 10:19:39 -0700 Subject: [PATCH] USB: ehci.patch (earlier irq disable) This tweaks the EHCI reboot notifier to also halt the EHCI controller, and makes that halt code force IRQs off. Both should always have been done. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f5eb9e7b5b18..b3eb02613bff 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -182,6 +182,9 @@ static int ehci_halt (struct ehci_hcd *ehci) { u32 temp = readl (&ehci->regs->status); + /* disable any irqs left enabled by previous code */ + writel (0, &ehci->regs->intr_enable); + if ((temp & STS_HALT) != 0) return 0; @@ -335,12 +338,17 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) #endif +/* Reboot notifiers kick in for silicon on any bus (not just pci, etc). + * This forcibly disables dma and IRQs, helping kexec and other cases + * where the next system software may expect clean state. + */ static int ehci_reboot (struct notifier_block *self, unsigned long code, void *null) { struct ehci_hcd *ehci; ehci = container_of (self, struct ehci_hcd, reboot_notifier); + (void) ehci_halt (ehci); /* make BIOS/etc use companion controller during reboot */ writel (0, &ehci->regs->configured_flag); -- cgit v1.2.3 From c9c7746dd333c12f482af2f1e63ea7eafc7cd529 Mon Sep 17 00:00:00 2001 From: Rui Santos Date: Fri, 23 Sep 2005 20:06:50 +0100 Subject: [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras This patch enables direct kernel support for the Artemis and ATIK astronomical based USB CCD cameras. Since all communications with this camera are done via an FTDI 245BM chip, it was only needed to specify the ProductID and VendorID of all three devices. In what tests are concerned, data was transfered from and to the FTDI at the chips Top speed (360KB/s). Signed-off-by: Rui Santos Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) --- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5a8631c8a4a7..8c12a0acf10d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -471,6 +471,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 2c35d74cc6d6..7c65d46c7598 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -198,6 +198,19 @@ /* an infrared receiver for user access control with IR tags */ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */ + /* * Protego product ids */ -- cgit v1.2.3 From 8da608caa07d5c9745ec86bf7c25ad423352f9a4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: disable tasklet if rtl8150 device is removed while active. This fixes a oops seen in the wild. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/rtl8150.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index c3d4e3589e30..787dd3591d6a 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -909,6 +909,7 @@ static void rtl8150_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (dev) { set_bit(RTL8150_UNPLUG, &dev->flags); + tasklet_disable(&dev->tl); unregister_netdev(dev->netdev); unlink_all_urbs(dev); free_all_urbs(dev); -- cgit v1.2.3 From 094f1649577dfc7f2c7407a8380e05a506b31f7f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: add endpoint information to sysfs This patch adds endpoint information for both devices and interfaces to sysfs. Previously it was only possible to get the endpoint information from usbfs, and never possible to get any information on endpoint 0. Signed-off-by: Greg Kroah-Hartman drivers/usb/core/sysfs.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/usb.h | 4 2 files changed, 197 insertions(+), 2 deletions(-) --- drivers/usb/core/sysfs.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/usb.h | 4 + 2 files changed, 197 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 00297f113849..eae413bf8c2a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -22,6 +22,174 @@ #include "usb.h" +/* endpoint stuff */ +struct endpoint_attribute { + struct device_attribute dev_attr; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev; +}; +#define to_endpoint_attr(_dev_attr) \ + container_of(_dev_attr, struct endpoint_attribute, dev_attr) + +#define usb_ep_attr(field, format_string) \ +static ssize_t show_ep_##field(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); \ + \ + return sprintf(buf, format_string, endpoint_attr->endpoint->field); \ +} +usb_ep_attr(bLength, "%02x\n") +usb_ep_attr(bDescriptorType, "%02x\n") +usb_ep_attr(bEndpointAddress, "%02x\n") +usb_ep_attr(bmAttributes, "%02x\n") +usb_ep_attr(bInterval, "%02x\n") + +static ssize_t show_ep_wMaxPacketSize(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + + return sprintf(buf, "%04x\n", + le16_to_cpu(endpoint_attr->endpoint->wMaxPacketSize) & 0x07ff); +} + +static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + char *type = "unknown"; + + switch (endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + type = "Control"; + break; + case USB_ENDPOINT_XFER_ISOC: + type = "Isoc"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "Bulk"; + break; + case USB_ENDPOINT_XFER_INT: + type = "Interrupt"; + break; + } + return sprintf(buf, "%s\n", type); +} + +static ssize_t show_ep_interval(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + struct usb_device *udev = endpoint_attr->udev; + struct usb_endpoint_descriptor *endpoint = endpoint_attr->endpoint; + char unit; + unsigned interval = 0; + unsigned in; + + in = (endpoint->bEndpointAddress & USB_DIR_IN); + + switch (endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ + interval = endpoint->bInterval; + break; + case USB_ENDPOINT_XFER_ISOC: + interval = 1 << (endpoint->bInterval - 1); + break; + case USB_ENDPOINT_XFER_BULK: + if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + interval = endpoint->bInterval; + break; + case USB_ENDPOINT_XFER_INT: + if (udev->speed == USB_SPEED_HIGH) { + interval = 1 << (endpoint->bInterval - 1); + } else + interval = endpoint->bInterval; + break; + } + interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000; + if (interval % 1000) + unit = 'u'; + else { + unit = 'm'; + interval /= 1000; + } + + return sprintf(buf, "%d%cs\n", interval, unit); +} + +static ssize_t show_ep_direction(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + char *direction; + + if ((endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL) + direction = "both"; + else if (endpoint_attr->endpoint->bEndpointAddress & USB_DIR_IN) + direction = "in"; + else + direction = "out"; + return sprintf(buf, "%s\n", direction); +} + +static struct endpoint_attribute *create_ep_attr(struct usb_endpoint_descriptor *endpoint, + struct usb_device *udev, char *name, + ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf)) +{ + struct endpoint_attribute *ep_attr; + + ep_attr = kzalloc(sizeof(*ep_attr), GFP_KERNEL); + if (ep_attr) { + ep_attr->endpoint = endpoint; + ep_attr->udev = udev; + ep_attr->dev_attr.attr.name = name; + ep_attr->dev_attr.attr.mode = 0444; + ep_attr->dev_attr.attr.owner = THIS_MODULE; + ep_attr->dev_attr.show = show; + } + return ep_attr; +} + +static void usb_create_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint, struct usb_device *udev) +{ + struct usb_endpoint_descriptor *ep; + + ep = &endpoint->desc; + + endpoint->attrs = kzalloc(sizeof(struct attribute *) * 10, GFP_KERNEL); + endpoint->attrs[0] = &(create_ep_attr(ep, udev, "direction", show_ep_direction)->dev_attr.attr); + endpoint->attrs[1] = &(create_ep_attr(ep, udev, "type", show_ep_type)->dev_attr.attr); + endpoint->attrs[2] = &(create_ep_attr(ep, udev, "bLength", show_ep_bLength)->dev_attr.attr); + endpoint->attrs[3] = &(create_ep_attr(ep, udev, "bDescriptorType", show_ep_bDescriptorType)->dev_attr.attr); + endpoint->attrs[4] = &(create_ep_attr(ep, udev, "bEndpointAddress", show_ep_bEndpointAddress)->dev_attr.attr); + endpoint->attrs[5] = &(create_ep_attr(ep, udev, "bmAttributes", show_ep_bmAttributes)->dev_attr.attr); + endpoint->attrs[6] = &(create_ep_attr(ep, udev, "wMaxPacketSize", show_ep_wMaxPacketSize)->dev_attr.attr); + endpoint->attrs[7] = &(create_ep_attr(ep, udev, "bInterval", show_ep_bInterval)->dev_attr.attr); + endpoint->attrs[8] = &(create_ep_attr(ep, udev, "interval", show_ep_interval)->dev_attr.attr); + endpoint->attrs[9] = NULL; + endpoint->num_attrs = 9; + + endpoint->attr_group = kzalloc(sizeof(*endpoint->attr_group), GFP_KERNEL); + endpoint->attr_name = kzalloc(10, GFP_KERNEL); + sprintf(endpoint->attr_name, "ep_%02x", endpoint->desc.bEndpointAddress); + + endpoint->attr_group->attrs = endpoint->attrs; + endpoint->attr_group->name = endpoint->attr_name; + sysfs_create_group(kobj, endpoint->attr_group); +} + +static void usb_remove_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint) +{ + int i; + + sysfs_remove_group(kobj, endpoint->attr_group); + kfree(endpoint->attr_group); + kfree(endpoint->attr_name); + for (i = 0; i < endpoint->num_attrs; ++i) + kfree(endpoint->attrs[i]); + kfree(endpoint->attrs); +} + /* Active configuration fields */ #define usb_actconfig_show(field, multiplier, format_string) \ static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ @@ -236,12 +404,14 @@ void usb_create_sysfs_dev_files (struct usb_device *udev) if (udev->serial) device_create_file (dev, &dev_attr_serial); device_create_file (dev, &dev_attr_configuration); + usb_create_ep_files(&dev->kobj, &udev->ep0, udev); } void usb_remove_sysfs_dev_files (struct usb_device *udev) { struct device *dev = &udev->dev; + usb_remove_ep_files(&dev->kobj, &udev->ep0); sysfs_remove_group(&dev->kobj, &dev_attr_grp); if (udev->descriptor.iManufacturer) @@ -333,20 +503,41 @@ static struct attribute_group intf_attr_grp = { .attrs = intf_attrs, }; +static void usb_create_intf_ep_files(struct usb_interface *intf) +{ + struct usb_host_interface *iface_desc; + int i; + + iface_desc = intf->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) + usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i], + interface_to_usbdev(intf)); +} + +static void usb_remove_intf_ep_files(struct usb_interface *intf) +{ + struct usb_host_interface *iface_desc; + int i; + + iface_desc = intf->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) + usb_remove_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i]); +} + void usb_create_sysfs_intf_files (struct usb_interface *intf) { sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); if (intf->cur_altsetting->string) device_create_file(&intf->dev, &dev_attr_interface); - + usb_create_intf_ep_files(intf); } void usb_remove_sysfs_intf_files (struct usb_interface *intf) { + usb_remove_intf_ep_files(intf); sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp); if (intf->cur_altsetting->string) device_remove_file(&intf->dev, &dev_attr_interface); - } diff --git a/include/linux/usb.h b/include/linux/usb.h index 8f731e8f2821..4512210e97e7 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -57,6 +57,10 @@ struct usb_host_endpoint { struct usb_endpoint_descriptor desc; struct list_head urb_list; void *hcpriv; + char *attr_name; + struct attribute_group *attr_group; + struct attribute **attrs; + int num_attrs; unsigned char *extra; /* Extra descriptors */ int extralen; -- cgit v1.2.3 From d6e5bcf4a7ebbe258124a931f1449338340a99b5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed Also fixes all drivers that set this field, and removes some other devfs specfic USB logic. Signed-off-by: Greg Kroah-Hartman drivers/usb/class/usblp.c | 3 +-- drivers/usb/core/file.c | 19 ++++--------------- drivers/usb/image/mdc800.c | 3 +-- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/hiddev.c | 3 +-- drivers/usb/media/dabusb.c | 3 +-- drivers/usb/misc/auerswald.c | 3 +-- drivers/usb/misc/idmouse.c | 5 ++--- drivers/usb/misc/legousbtower.c | 5 ++--- drivers/usb/misc/rio500.c | 3 +-- drivers/usb/misc/sisusbvga/sisusb.c | 5 ----- drivers/usb/misc/usblcd.c | 9 ++++----- drivers/usb/usb-skeleton.c | 3 +-- include/linux/usb.h | 7 ++----- 14 files changed, 22 insertions(+), 51 deletions(-) --- drivers/usb/class/usblp.c | 3 +-- drivers/usb/core/file.c | 19 ++++--------------- drivers/usb/image/mdc800.c | 3 +-- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/hiddev.c | 3 +-- drivers/usb/media/dabusb.c | 3 +-- drivers/usb/misc/auerswald.c | 3 +-- drivers/usb/misc/idmouse.c | 5 ++--- drivers/usb/misc/legousbtower.c | 5 ++--- drivers/usb/misc/rio500.c | 3 +-- drivers/usb/misc/sisusbvga/sisusb.c | 5 ----- drivers/usb/misc/usblcd.c | 9 ++++----- drivers/usb/usb-skeleton.c | 3 +-- include/linux/usb.h | 7 ++----- 14 files changed, 22 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index e195709c9c7f..357e75335f17 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -844,9 +844,8 @@ static struct file_operations usblp_fops = { }; static struct usb_class_driver usblp_class = { - .name = "usb/lp%d", + .name = "lp%d", .fops = &usblp_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = USBLP_MINOR_BASE, }; diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 78cb4be9529f..e695308095ae 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -17,7 +17,6 @@ #include #include -#include #include #include @@ -88,8 +87,6 @@ int usb_major_init(void) goto out; } - devfs_mk_dir("usb"); - out: return error; } @@ -97,7 +94,6 @@ out: void usb_major_cleanup(void) { class_destroy(usb_class); - devfs_remove("usb"); unregister_chrdev(USB_MAJOR, "usb"); } @@ -112,8 +108,7 @@ void usb_major_cleanup(void) * enabled, the minor number will be based on the next available free minor, * starting at the class_driver->minor_base. * - * This function also creates the devfs file for the usb device, if devfs - * is enabled, and creates a usb class device in the sysfs tree. + * This function also creates a usb class device in the sysfs tree. * * usb_deregister_dev() must be called when the driver is done with * the minor numbers given out by this function. @@ -162,11 +157,8 @@ int usb_register_dev(struct usb_interface *intf, intf->minor = minor; - /* handle the devfs registration */ - snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base); - devfs_mk_cdev(MKDEV(USB_MAJOR, minor), class_driver->mode, name); - /* create a usb class device for this usb interface */ + snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base); temp = strrchr(name, '/'); if (temp && (temp[1] != 0x00)) ++temp; @@ -179,7 +171,6 @@ int usb_register_dev(struct usb_interface *intf, spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; spin_unlock (&minor_lock); - devfs_remove (name); retval = PTR_ERR(intf->class_dev); } exit: @@ -197,9 +188,8 @@ EXPORT_SYMBOL(usb_register_dev); * call to usb_register_dev() (usually when the device is disconnected * from the system.) * - * This function also cleans up the devfs file for the usb device, if devfs - * is enabled, and removes the usb class device from the sysfs tree. - * + * This function also removes the usb class device from the sysfs tree. + * * This should be called by all drivers that use the USB major number. */ void usb_deregister_dev(struct usb_interface *intf, @@ -222,7 +212,6 @@ void usb_deregister_dev(struct usb_interface *intf, spin_unlock (&minor_lock); snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); - devfs_remove (name); class_device_destroy(usb_class, MKDEV(USB_MAJOR, intf->minor)); intf->class_dev = NULL; intf->minor = -1; diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index a330a4b50e16..e4ec133ee74a 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -425,9 +425,8 @@ static void mdc800_usb_download_notify (struct urb *urb, struct pt_regs *res) static struct usb_driver mdc800_usb_driver; static struct file_operations mdc800_device_ops; static struct usb_class_driver mdc800_class = { - .name = "usb/mdc800%d", + .name = "mdc800%d", .fops = &mdc800_device_ops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = MDC800_DEVICE_MINOR_BASE, }; diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 1c5205321d83..1c3b472a3bca 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2154,7 +2154,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) * input_handles associated with this input device. * What identifies an evdev input_handler is that it begins * with 'event', continues with a digit, and that in turn - * is mapped to /{devfs}/input/eventN. + * is mapped to input/eventN. */ list_for_each_safe(node, next, &inputdev->h_list) { inputhandle = to_handle(node); diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index d32427818af7..440377c7a0da 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -732,9 +732,8 @@ static struct file_operations hiddev_fops = { }; static struct usb_class_driver hiddev_class = { - .name = "usb/hid/hiddev%d", + .name = "hiddev%d", .fops = &hiddev_fops, - .mode = S_IFCHR | S_IRUGO | S_IWUSR, .minor_base = HIDDEV_MINOR_BASE, }; diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c index 6ca2fae99d2d..27b23c55bbc7 100644 --- a/drivers/usb/media/dabusb.c +++ b/drivers/usb/media/dabusb.c @@ -707,9 +707,8 @@ static struct file_operations dabusb_fops = }; static struct usb_class_driver dabusb_class = { - .name = "usb/dabusb%d", + .name = "dabusb%d", .fops = &dabusb_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = DABUSB_MINOR, }; diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index ae4681f9f0ea..5f33f7c64885 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -1873,9 +1873,8 @@ static struct file_operations auerswald_fops = }; static struct usb_class_driver auerswald_class = { - .name = "usb/auer%d", + .name = "auer%d", .fops = &auerswald_fops, - .mode = S_IFCHR | S_IRUGO | S_IWUGO, .minor_base = AUER_MINOR_BASE, }; diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 733acc213726..3944a55ed74c 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -105,11 +105,10 @@ static struct file_operations idmouse_fops = { .release = idmouse_release, }; -/* class driver information for devfs */ +/* class driver information */ static struct usb_class_driver idmouse_class = { - .name = "usb/idmouse%d", + .name = "idmouse%d", .fops = &idmouse_fops, - .mode = S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH, /* filemode (char, 444) */ .minor_base = USB_IDMOUSE_MINOR_BASE, }; diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 7d06105763d4..2703e205bc8f 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -271,12 +271,11 @@ static struct file_operations tower_fops = { /* * usb class driver info in order to get a minor number from the usb core, - * and to have the device registered with devfs and the driver core + * and to have the device registered with the driver core */ static struct usb_class_driver tower_class = { - .name = "usb/legousbtower%d", + .name = "legousbtower%d", .fops = &tower_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = LEGO_USB_TOWER_MINOR_BASE, }; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 26f77e29c7a6..7d02d8ec6b1a 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -443,9 +443,8 @@ file_operations usb_rio_fops = { }; static struct usb_class_driver usb_rio_class = { - .name = "usb/rio500%d", + .name = "rio500%d", .fops = &usb_rio_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = RIO_MINOR, }; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 39db3155723a..222ae9cd4c7c 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3239,12 +3239,7 @@ static struct file_operations usb_sisusb_fops = { }; static struct usb_class_driver usb_sisusb_class = { -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13) - .name = "usb/sisusbvga%d", - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, -#else .name = "sisusbvga%d", -#endif .fops = &usb_sisusb_fops, .minor_base = SISUSB_MINOR }; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 096ab3029676..85f3725334b0 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -251,13 +251,12 @@ static struct file_operations lcd_fops = { }; /* - * * usb class driver info in order to get a minor number from the usb core, - * * and to have the device registered with devfs and the driver core - * */ + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with the driver core + */ static struct usb_class_driver lcd_class = { - .name = "usb/lcd%d", + .name = "lcd%d", .fops = &lcd_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = USBLCD_MINOR, }; diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 353f24d45bc1..6c3a53f8f26c 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -223,9 +223,8 @@ static struct file_operations skel_fops = { * and to have the device registered with devfs and the driver core */ static struct usb_class_driver skel_class = { - .name = "usb/skel%d", + .name = "skel%d", .fops = &skel_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = USB_SKEL_MINOR_BASE, }; diff --git a/include/linux/usb.h b/include/linux/usb.h index 4512210e97e7..04502e183dd1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -576,10 +576,8 @@ extern struct bus_type usb_bus_type; /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number - * @name: devfs name for this driver. Will also be used by the driver - * class code to create a usb class device. + * @name: the usb class device name for this driver. Will show up in sysfs. * @fops: pointer to the struct file_operations of this driver. - * @mode: the mode for the devfs file to be created for this driver. * @minor_base: the start of the minor range for this driver. * * This structure is used for the usb_register_dev() and @@ -589,8 +587,7 @@ extern struct bus_type usb_bus_type; struct usb_class_driver { char *name; struct file_operations *fops; - mode_t mode; - int minor_base; + int minor_base; }; /* -- cgit v1.2.3 From e639dd3f4edd4847d160899b19e95ee1a06a6dcb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: add more snooping hooks in devio.c Now we can log the urbs travelling through usbfs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 55 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index befe0c7f63d1..6c15dabcfc0b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -279,6 +279,28 @@ static inline struct async *async_getpending(struct dev_state *ps, void __user * return NULL; } +static void snoop_urb(struct urb *urb, void __user *userurb) +{ + int j; + unsigned char *data = urb->transfer_buffer; + + if (!usbfs_snoop) + return; + + if (urb->pipe & USB_DIR_IN) + dev_info(&urb->dev->dev, "direction=IN\n"); + else + dev_info(&urb->dev->dev, "direction=OUT\n"); + dev_info(&urb->dev->dev, "userurb=%p\n", userurb); + dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n", + urb->transfer_buffer_length); + dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length); + dev_info(&urb->dev->dev, "data: "); + for (j = 0; j < urb->transfer_buffer_length; ++j) + printk ("%02x ", data[j]); + printk("\n"); +} + static void async_completed(struct urb *urb, struct pt_regs *regs) { struct async *as = (struct async *)urb->context; @@ -296,7 +318,9 @@ static void async_completed(struct urb *urb, struct pt_regs *regs) kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid, as->euid); } - wake_up(&ps->wait); + snoop(&urb->dev->dev, "urb complete\n"); + snoop_urb(urb, as->userurb); + wake_up(&ps->wait); } static void destroy_async (struct dev_state *ps, struct list_head *list) @@ -601,7 +625,7 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (usbfs_snoop) { dev_info(&dev->dev, "control read: data "); for (j = 0; j < i; ++j) - printk ("%02x ", (unsigned char)(tbuf)[j]); + printk("%02x ", (unsigned char)(tbuf)[j]); printk("\n"); } if (copy_to_user(ctrl.data, tbuf, i)) { @@ -624,7 +648,7 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (usbfs_snoop) { dev_info(&dev->dev, "control write: data: "); for (j = 0; j < ctrl.wLength; ++j) - printk ("%02x ", (unsigned char)(tbuf)[j]); + printk("%02x ", (unsigned char)(tbuf)[j]); printk("\n"); } usb_unlock_device(dev); @@ -649,7 +673,7 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) unsigned int tmo, len1, pipe; int len2; unsigned char *tbuf; - int i, ret; + int i, j, ret; if (copy_from_user(&bulk, arg, sizeof(bulk))) return -EFAULT; @@ -674,10 +698,18 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) kfree(tbuf); return -EINVAL; } + snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n", + bulk.len, bulk.timeout); usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); if (!i && len2) { + if (usbfs_snoop) { + dev_info(&dev->dev, "bulk read: data "); + for (j = 0; j < len2; ++j) + printk("%02x ", (unsigned char)(tbuf)[j]); + printk("\n"); + } if (copy_to_user(bulk.data, tbuf, len2)) { kfree(tbuf); return -EFAULT; @@ -690,6 +722,14 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) return -EFAULT; } } + snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n", + bulk.len, bulk.timeout); + if (usbfs_snoop) { + dev_info(&dev->dev, "bulk write: data: "); + for (j = 0; j < len1; ++j) + printk("%02x ", (unsigned char)(tbuf)[j]); + printk("\n"); + } usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); @@ -835,7 +875,6 @@ static int proc_setconfig(struct dev_state *ps, void __user *arg) return status; } - static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, struct usbdevfs_iso_packet_desc __user *iso_frame_desc, void __user *arg) @@ -896,6 +935,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, kfree(dr); return -EFAULT; } + snoop(&ps->dev->dev, "control urb\n"); break; case USBDEVFS_URB_TYPE_BULK: @@ -910,6 +950,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) return -EFAULT; + snoop(&ps->dev->dev, "bulk urb\n"); break; case USBDEVFS_URB_TYPE_ISO: @@ -939,6 +980,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; } uurb->buffer_length = totlen; + snoop(&ps->dev->dev, "iso urb\n"); break; case USBDEVFS_URB_TYPE_INTERRUPT: @@ -954,6 +996,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) return -EFAULT; + snoop(&ps->dev->dev, "interrupt urb\n"); break; default: @@ -1003,6 +1046,8 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EFAULT; } } + snoop(&as->urb->dev->dev, "submit urb\n"); + snoop_urb(as->urb, as->userurb); async_newpending(as); if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) { dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret); -- cgit v1.2.3 From 38ffdd62b0f466ef9126ac9f060ade5f218b4887 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 24 Sep 2005 13:10:16 -0700 Subject: [PATCH] ub: suppress gcc warnings for pointer casts When building on a 64-bit platform, gcc produces a warning "cast of a pointer to an integer of a different size". The scatterlist.offset on the LHS is unsigned int, so I used that originally. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman drivers/block/ub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- drivers/block/ub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ed4d5006fe62..bfb23d543ff7 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1512,7 +1512,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd) scmd->nsg = 1; sg = &scmd->sgv[0]; sg->page = virt_to_page(sc->top_sense); - sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1); + sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1); sg->length = UB_SENSE_SIZE; scmd->len = UB_SENSE_SIZE; scmd->lun = cmd->lun; @@ -1891,7 +1891,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, cmd->nsg = 1; sg = &cmd->sgv[0]; sg->page = virt_to_page(p); - sg->offset = (unsigned int)p & (PAGE_SIZE-1); + sg->offset = (unsigned long)p & (PAGE_SIZE-1); sg->length = 8; cmd->len = 8; cmd->lun = lun; -- cgit v1.2.3 From 7586269c0b52970f60bb69fcb86e765fc1d72309 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 Sep 2005 17:14:37 -0700 Subject: [PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-) --- drivers/Makefile | 2 +- drivers/pci/quirks.c | 253 +-------------------------------------- drivers/usb/Makefile | 1 + drivers/usb/host/Makefile | 5 +- drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-) create mode 100644 drivers/usb/host/pci-quirks.c (limited to 'drivers') diff --git a/drivers/Makefile b/drivers/Makefile index 1a109a6dd953..65670be6ff1a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -5,7 +5,7 @@ # Rewritten to use lists instead of if-statements. # -obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_PCI) += pci/ usb/ obj-$(CONFIG_PARISC) += parisc/ obj-y += video/ obj-$(CONFIG_ACPI) += acpi/ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index ee1605906a3e..bbd9c2323d8c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -7,6 +7,9 @@ * * Copyright (c) 1999 Martin Mares * + * Init/reset quirks for USB host controllers should be in the + * USB quirks file, where their drivers can access reuse it. + * * The bridge optimization stuff has been removed. If you really * have a silly BIOS which is unable to set your host bridge right, * use the PowerTweak utility (see http://powertweak.sourceforge.net). @@ -644,28 +647,6 @@ static void quirk_via_irq(struct pci_dev *dev) } DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); -/* - * PIIX3 USB: We have to disable USB interrupts that are - * hardwired to PIRQD# and may be shared with an - * external device. - * - * Legacy Support Register (LEGSUP): - * bit13: USB PIRQ Enable (USBPIRQDEN), - * bit4: Trap/SMI On IRQ Enable (USBSMIEN). - * - * We mask out all r/wc bits, too. - */ -static void __devinit quirk_piix3_usb(struct pci_dev *dev) -{ - u16 legsup; - - pci_read_config_word(dev, 0xc0, &legsup); - legsup &= 0x50ef; - pci_write_config_word(dev, 0xc0, legsup); -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); - /* * VIA VT82C598 has its device ID settable and many BIOSes * set it to the ID of VT82C597 for backward compatibility. @@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev) pci_read_config_byte(dev, 0x77, &val); } - -#define UHCI_USBLEGSUP 0xc0 /* legacy support */ -#define UHCI_USBCMD 0 /* command register */ -#define UHCI_USBSTS 2 /* status register */ -#define UHCI_USBINTR 4 /* interrupt register */ -#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ -#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ -#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ -#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ -#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ - -#define OHCI_CONTROL 0x04 -#define OHCI_CMDSTATUS 0x08 -#define OHCI_INTRSTATUS 0x0c -#define OHCI_INTRENABLE 0x10 -#define OHCI_INTRDISABLE 0x14 -#define OHCI_OCR (1 << 3) /* ownership change request */ -#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ -#define OHCI_INTR_OC (1 << 30) /* ownership change */ - -#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */ -#define EHCI_USBCMD 0 /* command register */ -#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ -#define EHCI_USBSTS 4 /* status register */ -#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ -#define EHCI_USBINTR 8 /* interrupt register */ -#define EHCI_USBLEGSUP 0 /* legacy support register */ -#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ -#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ -#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ -#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ - -int usb_early_handoff __devinitdata = 0; -static int __init usb_handoff_early(char *str) -{ - usb_early_handoff = 1; - return 0; -} -__setup("usb-handoff", usb_handoff_early); - -static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) -{ - unsigned long base = 0; - int wait_time, delta; - u16 val, sts; - int i; - - for (i = 0; i < PCI_ROM_RESOURCE; i++) - if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { - base = pci_resource_start(pdev, i); - break; - } - - if (!base) - return; - - /* - * stop controller - */ - sts = inw(base + UHCI_USBSTS); - val = inw(base + UHCI_USBCMD); - val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); - outw(val, base + UHCI_USBCMD); - - /* - * wait while it stops if it was running - */ - if ((sts & UHCI_USBSTS_HALTED) == 0) - { - wait_time = 1000; - delta = 100; - - do { - outw(0x1f, base + UHCI_USBSTS); - udelay(delta); - wait_time -= delta; - val = inw(base + UHCI_USBSTS); - if (val & UHCI_USBSTS_HALTED) - break; - } while (wait_time > 0); - } - - /* - * disable interrupts & legacy support - */ - outw(0, base + UHCI_USBINTR); - outw(0x1f, base + UHCI_USBSTS); - pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); - if (val & 0xbf) - pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); - -} - -static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) -{ - void __iomem *base; - int wait_time; - - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (base == NULL) return; - - if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { - wait_time = 500; /* 0.5 seconds */ - writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); - writel(OHCI_OCR, base + OHCI_CMDSTATUS); - while (wait_time > 0 && - readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { - wait_time -= 10; - msleep(10); - } - } - - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); - - iounmap(base); -} - -static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) -{ - int wait_time, delta; - void __iomem *base, *op_reg_base; - u32 hcc_params, val, temp; - u8 cap_length; - - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (base == NULL) return; - - cap_length = readb(base); - op_reg_base = base + cap_length; - hcc_params = readl(base + EHCI_HCC_PARAMS); - hcc_params = (hcc_params >> 8) & 0xff; - if (hcc_params) { - pci_read_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - &val); - if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) { - /* - * Ok, BIOS is in smm mode, try to hand off... - */ - pci_read_config_dword(pdev, - hcc_params + EHCI_USBLEGCTLSTS, - &temp); - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGCTLSTS, - temp | EHCI_USBLEGCTLSTS_SOOE); - val |= EHCI_USBLEGSUP_OS; - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - val); - - wait_time = 500; - do { - msleep(10); - wait_time -= 10; - pci_read_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - &val); - } while (wait_time && (val & EHCI_USBLEGSUP_BIOS)); - if (!wait_time) { - /* - * well, possibly buggy BIOS... - */ - printk(KERN_WARNING "EHCI early BIOS handoff " - "failed (BIOS bug ?)\n"); - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - EHCI_USBLEGSUP_OS); - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGCTLSTS, - 0); - } - } - } - - /* - * halt EHCI & disable its interrupts in any case - */ - val = readl(op_reg_base + EHCI_USBSTS); - if ((val & EHCI_USBSTS_HALTED) == 0) { - val = readl(op_reg_base + EHCI_USBCMD); - val &= ~EHCI_USBCMD_RUN; - writel(val, op_reg_base + EHCI_USBCMD); - - wait_time = 2000; - delta = 100; - do { - writel(0x3f, op_reg_base + EHCI_USBSTS); - udelay(delta); - wait_time -= delta; - val = readl(op_reg_base + EHCI_USBSTS); - if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { - break; - } - } while (wait_time > 0); - } - writel(0, op_reg_base + EHCI_USBINTR); - writel(0x3f, op_reg_base + EHCI_USBSTS); - - iounmap(base); - - return; -} - - - -static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) -{ - if (!usb_early_handoff) - return; - - if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ - quirk_usb_handoff_uhci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ - quirk_usb_handoff_ohci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ - quirk_usb_disable_ehci(pdev); - } - - return; -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); - /* * ... This is further complicated by the fact that some SiS96x south * bridges pretend to be 85C503/5513 instead. In that case see if we diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index df014c2a7c54..aa554f9805ee 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/ obj-$(CONFIG_USB_MON) += mon/ +obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 350d14fc1cc9..58321d3f314c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -1,8 +1,9 @@ # -# Makefile for USB Host Controller Driver -# framework and drivers +# Makefile for USB Host Controller Drivers # +obj-$(CONFIG_PCI) += pci-quirks.o + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c new file mode 100644 index 000000000000..8ee5c3ed4cd6 --- /dev/null +++ b/drivers/usb/host/pci-quirks.c @@ -0,0 +1,272 @@ +/* + * This file contains code to reset and initialize USB host controllers. + * Some of it includes work-arounds for PCI hardware and BIOS quirks. + * It may need to run early during booting -- before USB would normally + * initialize -- to ensure that Linux doesn't use any legacy modes. + * + * Copyright (c) 1999 Martin Mares + * (and others) + */ + +#include +#include +#include +#include +#include +#include +#include + + +/* + * PIIX3 USB: We have to disable USB interrupts that are + * hardwired to PIRQD# and may be shared with an + * external device. + * + * Legacy Support Register (LEGSUP): + * bit13: USB PIRQ Enable (USBPIRQDEN), + * bit4: Trap/SMI On IRQ Enable (USBSMIEN). + * + * We mask out all r/wc bits, too. + */ +static void __devinit quirk_piix3_usb(struct pci_dev *dev) +{ + u16 legsup; + + pci_read_config_word(dev, 0xc0, &legsup); + legsup &= 0x50ef; + pci_write_config_word(dev, 0xc0, legsup); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); + + +/* FIXME these should be the guts of hcd->reset() methods; resolve all + * the differences between this version and the HCD's version. + */ + +#define UHCI_USBLEGSUP 0xc0 /* legacy support */ +#define UHCI_USBCMD 0 /* command register */ +#define UHCI_USBSTS 2 /* status register */ +#define UHCI_USBINTR 4 /* interrupt register */ +#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ +#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ +#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ +#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ +#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ + +#define OHCI_CONTROL 0x04 +#define OHCI_CMDSTATUS 0x08 +#define OHCI_INTRSTATUS 0x0c +#define OHCI_INTRENABLE 0x10 +#define OHCI_INTRDISABLE 0x14 +#define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ +#define OHCI_INTR_OC (1 << 30) /* ownership change */ + +#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */ +#define EHCI_USBCMD 0 /* command register */ +#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ +#define EHCI_USBSTS 4 /* status register */ +#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ +#define EHCI_USBINTR 8 /* interrupt register */ +#define EHCI_USBLEGSUP 0 /* legacy support register */ +#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ +#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ +#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ +#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ + +int usb_early_handoff __devinitdata = 0; +static int __init usb_handoff_early(char *str) +{ + usb_early_handoff = 1; + return 0; +} +__setup("usb-handoff", usb_handoff_early); + +static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +{ + unsigned long base = 0; + int wait_time, delta; + u16 val, sts; + int i; + + for (i = 0; i < PCI_ROM_RESOURCE; i++) + if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { + base = pci_resource_start(pdev, i); + break; + } + + if (!base) + return; + + /* + * stop controller + */ + sts = inw(base + UHCI_USBSTS); + val = inw(base + UHCI_USBCMD); + val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); + outw(val, base + UHCI_USBCMD); + + /* + * wait while it stops if it was running + */ + if ((sts & UHCI_USBSTS_HALTED) == 0) + { + wait_time = 1000; + delta = 100; + + do { + outw(0x1f, base + UHCI_USBSTS); + udelay(delta); + wait_time -= delta; + val = inw(base + UHCI_USBSTS); + if (val & UHCI_USBSTS_HALTED) + break; + } while (wait_time > 0); + } + + /* + * disable interrupts & legacy support + */ + outw(0, base + UHCI_USBINTR); + outw(0x1f, base + UHCI_USBSTS); + pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); + if (val & 0xbf) + pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); + +} + +static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) +{ + void __iomem *base; + int wait_time; + + base = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (base == NULL) return; + + if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { + wait_time = 500; /* 0.5 seconds */ + writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); + writel(OHCI_OCR, base + OHCI_CMDSTATUS); + while (wait_time > 0 && + readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { + wait_time -= 10; + msleep(10); + } + } + + /* + * disable interrupts + */ + writel(~(u32)0, base + OHCI_INTRDISABLE); + writel(~(u32)0, base + OHCI_INTRSTATUS); + + iounmap(base); +} + +static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) +{ + int wait_time, delta; + void __iomem *base, *op_reg_base; + u32 hcc_params, val, temp; + u8 cap_length; + + base = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (base == NULL) return; + + cap_length = readb(base); + op_reg_base = base + cap_length; + hcc_params = readl(base + EHCI_HCC_PARAMS); + hcc_params = (hcc_params >> 8) & 0xff; + if (hcc_params) { + pci_read_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + &val); + if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) { + /* + * Ok, BIOS is in smm mode, try to hand off... + */ + pci_read_config_dword(pdev, + hcc_params + EHCI_USBLEGCTLSTS, + &temp); + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGCTLSTS, + temp | EHCI_USBLEGCTLSTS_SOOE); + val |= EHCI_USBLEGSUP_OS; + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + val); + + wait_time = 500; + do { + msleep(10); + wait_time -= 10; + pci_read_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + &val); + } while (wait_time && (val & EHCI_USBLEGSUP_BIOS)); + if (!wait_time) { + /* + * well, possibly buggy BIOS... + */ + printk(KERN_WARNING "EHCI early BIOS handoff " + "failed (BIOS bug ?)\n"); + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + EHCI_USBLEGSUP_OS); + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGCTLSTS, + 0); + } + } + } + + /* + * halt EHCI & disable its interrupts in any case + */ + val = readl(op_reg_base + EHCI_USBSTS); + if ((val & EHCI_USBSTS_HALTED) == 0) { + val = readl(op_reg_base + EHCI_USBCMD); + val &= ~EHCI_USBCMD_RUN; + writel(val, op_reg_base + EHCI_USBCMD); + + wait_time = 2000; + delta = 100; + do { + writel(0x3f, op_reg_base + EHCI_USBSTS); + udelay(delta); + wait_time -= delta; + val = readl(op_reg_base + EHCI_USBSTS); + if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { + break; + } + } while (wait_time > 0); + } + writel(0, op_reg_base + EHCI_USBINTR); + writel(0x3f, op_reg_base + EHCI_USBSTS); + + iounmap(base); + + return; +} + + + +static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) +{ + if (!usb_early_handoff) + return; + + if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ + quirk_usb_handoff_uhci(pdev); + } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ + quirk_usb_handoff_ohci(pdev); + } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ + quirk_usb_disable_ehci(pdev); + } + + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); -- cgit v1.2.3 From db69087437dd5135a9362da1c37fe072070e8f60 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:56:33 -0700 Subject: [PATCH] usb_interface power state This updates the handling of power state for USB interfaces. - Formalizes an existing invariant: interface "power state" is a boolean: ON when I/O is allowed, and FREEZE otherwise. It does so by defining some inlined helpers, then using them. - Adds a useful invariant: the only interfaces marked active are those bound to non-suspended drivers. Later patches build on this invariant. - Simplifies the interface driver API (and removes some error paths) by removing the requirement that they record power state changes during suspend and resume callbacks. Now usbcore does that. A few drivers were simplified to address that last change. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 33 +++++++++------------ drivers/usb/core/message.c | 1 drivers/usb/core/usb.c | 65 +++++++++++++++++++++++++++++++++---------- drivers/usb/core/usb.h | 18 +++++++++++ drivers/usb/input/hid-core.c | 2 - drivers/usb/misc/usbtest.c | 10 ------ drivers/usb/net/pegasus.c | 2 - drivers/usb/net/usbnet.c | 2 - 8 files changed, 85 insertions(+), 48 deletions(-) --- drivers/usb/core/hub.c | 33 ++++++++++------------ drivers/usb/core/message.c | 1 + drivers/usb/core/usb.c | 65 ++++++++++++++++++++++++++++++++++---------- drivers/usb/core/usb.h | 18 ++++++++++++ drivers/usb/input/hid-core.c | 2 -- drivers/usb/misc/usbtest.c | 10 ------- drivers/usb/net/pegasus.c | 2 -- drivers/usb/net/usbnet.c | 2 -- 8 files changed, 85 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3e2024c4347..61341d2f3c0e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1624,7 +1624,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (state.event <= intf->dev.power.power_state.event) + if (!is_active(intf)) continue; if (!intf->dev.driver) continue; @@ -1632,11 +1632,12 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, if (driver->suspend) { status = driver->suspend(intf, state); - if (intf->dev.power.power_state.event != state.event - || status) + if (status == 0) + mark_quiesced(intf); + else dev_err(&intf->dev, - "suspend %d fail, code %d\n", - state.event, status); + "suspend error %d\n", + status); } /* only drivers with suspend() can ever resume(); @@ -1787,7 +1788,7 @@ static int finish_port_resume(struct usb_device *udev) struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (intf->dev.power.power_state.event == PM_EVENT_ON) + if (is_active(intf)) continue; if (!intf->dev.driver) { /* FIXME maybe force to alt 0 */ @@ -1800,12 +1801,14 @@ static int finish_port_resume(struct usb_device *udev) continue; /* can we do better than just logging errors? */ + mark_active(intf); status = driver->resume(intf); - if (intf->dev.power.power_state.event != PM_EVENT_ON - || status) + if (status < 0) { + mark_quiesced(intf); dev_dbg(&intf->dev, - "resume fail, state %d code %d\n", - intf->dev.power.power_state.event, status); + "resume error %d\n", + status); + } } status = 0; @@ -1952,7 +1955,7 @@ static int remote_wakeup(struct usb_device *udev) return status; } -static int hub_suspend(struct usb_interface *intf, pm_message_t state) +static int hub_suspend(struct usb_interface *intf, pm_message_t msg) { struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev = hub->hdev; @@ -1970,14 +1973,13 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t state) if (!udev) continue; down(&udev->serialize); - status = __usb_suspend_device(udev, port1, state); + status = __usb_suspend_device(udev, port1, msg); up(&udev->serialize); if (status < 0) dev_dbg(&intf->dev, "suspend port %d --> %d\n", port1, status); } - intf->dev.power.power_state = state; return 0; } @@ -1988,9 +1990,6 @@ static int hub_resume(struct usb_interface *intf) unsigned port1; int status; - if (intf->dev.power.power_state.event == PM_EVENT_ON) - return 0; - for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; u16 portstat, portchange; @@ -2024,8 +2023,6 @@ static int hub_resume(struct usb_interface *intf) } up(&udev->serialize); } - intf->dev.power.power_state = PMSG_ON; - hub->resume_root_hub = 0; hub_activate(hub); return 0; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index f9a81e84dbdf..ebf59ea99263 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1393,6 +1393,7 @@ free_interfaces: intf->dev.dma_mask = dev->dev.dma_mask; intf->dev.release = release_interface; device_initialize (&intf->dev); + mark_quiesced(intf); sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d", dev->bus->busnum, dev->devpath, configuration, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4c57f3f649ed..6ecfdce4f848 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -107,10 +107,19 @@ static int usb_probe_interface(struct device *dev) id = usb_match_id (intf, driver->id_table); if (id) { dev_dbg (dev, "%s - got id\n", __FUNCTION__); + + /* Interface "power state" doesn't correspond to any hardware + * state whatsoever. We use it to record when it's bound to + * a driver that may start I/0: it's not frozen/quiesced. + */ + mark_active(intf); intf->condition = USB_INTERFACE_BINDING; error = driver->probe (intf, id); - intf->condition = error ? USB_INTERFACE_UNBOUND : - USB_INTERFACE_BOUND; + if (error) { + mark_quiesced(intf); + intf->condition = USB_INTERFACE_UNBOUND; + } else + intf->condition = USB_INTERFACE_BOUND; } return error; @@ -136,6 +145,7 @@ static int usb_unbind_interface(struct device *dev) 0); usb_set_intfdata(intf, NULL); intf->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(intf); return 0; } @@ -299,6 +309,7 @@ int usb_driver_claim_interface(struct usb_driver *driver, dev->driver = &driver->driver; usb_set_intfdata(iface, priv); iface->condition = USB_INTERFACE_BOUND; + mark_active(iface); /* if interface was already added, bind now; else let * the future device_add() bind it, bypassing probe() @@ -345,6 +356,7 @@ void usb_driver_release_interface(struct usb_driver *driver, dev->driver = NULL; usb_set_intfdata(iface, NULL); iface->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(iface); } /** @@ -1404,8 +1416,9 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, static int usb_generic_suspend(struct device *dev, pm_message_t message) { - struct usb_interface *intf; - struct usb_driver *driver; + struct usb_interface *intf; + struct usb_driver *driver; + int status; if (dev->driver == &usb_generic_driver) return usb_suspend_device (to_usb_device(dev), message); @@ -1417,21 +1430,34 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); - /* there's only one USB suspend state */ - if (intf->dev.power.power_state.event) + /* with no hardware, USB interfaces only use FREEZE and ON states */ + if (!is_active(intf)) return 0; - if (driver->suspend) - return driver->suspend(intf, message); - return 0; + if (driver->suspend && driver->resume) { + status = driver->suspend(intf, message); + if (status) + dev_err(dev, "%s error %d\n", "suspend", status); + else + mark_quiesced(intf); + } else { + // FIXME else if there's no suspend method, disconnect... + dev_warn(dev, "no %s?\n", "suspend"); + status = 0; + } + return status; } static int usb_generic_resume(struct device *dev) { - struct usb_interface *intf; - struct usb_driver *driver; + struct usb_interface *intf; + struct usb_driver *driver; + int status; + + if (dev->power.power_state.event == PM_EVENT_ON) + return 0; - /* devices resume through their hub */ + /* devices resume through their hubs */ if (dev->driver == &usb_generic_driver) return usb_resume_device (to_usb_device(dev)); @@ -1442,8 +1468,19 @@ static int usb_generic_resume(struct device *dev) intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); - if (driver->resume) - return driver->resume(intf); + /* if driver was suspended, it has a resume method; + * however, sysfs can wrongly mark things as suspended + * (on the "no suspend method" FIXME path above) + */ + mark_active(intf); + if (driver->resume) { + status = driver->resume(intf); + if (status) { + dev_err(dev, "%s error %d\n", "resume", status); + mark_quiesced(intf); + } + } else + dev_warn(dev, "no %s?\n", "resume"); return 0; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index e6504f3370ad..3741a990403e 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -28,6 +28,24 @@ extern void usb_major_cleanup(void); extern int usb_host_init(void); extern void usb_host_cleanup(void); +/* Interfaces and their "power state" are owned by usbcore */ + +static inline void mark_active(struct usb_interface *f) +{ + f->dev.power.power_state.event = PM_EVENT_ON; +} + +static inline void mark_quiesced(struct usb_interface *f) +{ + f->dev.power.power_state.event = PM_EVENT_FREEZE; +} + +static inline int is_active(struct usb_interface *f) +{ + return f->dev.power.power_state.event == PM_EVENT_ON; +} + + /* for labeling diagnostics */ extern const char *usbcore_name; diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 411a0645a7a3..f7fcce731f54 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1887,7 +1887,6 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); usb_kill_urb(hid->urbin); - intf->dev.power.power_state = PMSG_SUSPEND; dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1897,7 +1896,6 @@ static int hid_resume(struct usb_interface *intf) struct hid_device *hid = usb_get_intfdata (intf); int status; - intf->dev.power.power_state = PMSG_ON; if (hid->open) status = usb_submit_urb(hid->urbin, GFP_NOIO); else diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 54799eb0bc60..d055196533af 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1948,21 +1948,11 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id) static int usbtest_suspend (struct usb_interface *intf, pm_message_t message) { - struct usbtest_dev *dev = usb_get_intfdata (intf); - - down (&dev->sem); - intf->dev.power.power_state = PMSG_SUSPEND; - up (&dev->sem); return 0; } static int usbtest_resume (struct usb_interface *intf) { - struct usbtest_dev *dev = usb_get_intfdata (intf); - - down (&dev->sem); - intf->dev.power.power_state = PMSG_ON; - up (&dev->sem); return 0; } diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 6a4ffe6c3977..537eb181d985 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -1384,7 +1384,6 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message) usb_kill_urb(pegasus->rx_urb); usb_kill_urb(pegasus->intr_urb); } - intf->dev.power.power_state = PMSG_SUSPEND; return 0; } @@ -1392,7 +1391,6 @@ static int pegasus_resume (struct usb_interface *intf) { struct pegasus *pegasus = usb_get_intfdata(intf); - intf->dev.power.power_state = PMSG_ON; netif_device_attach (pegasus->net); if (netif_running(pegasus->net)) { pegasus->rx_urb->status = 0; diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index fce81d738933..74f05c9c84d5 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -1185,7 +1185,6 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) netif_device_detach (dev->net); (void) unlink_urbs (dev, &dev->rxq); (void) unlink_urbs (dev, &dev->txq); - intf->dev.power.power_state = PMSG_SUSPEND; return 0; } EXPORT_SYMBOL_GPL(usbnet_suspend); @@ -1194,7 +1193,6 @@ int usbnet_resume (struct usb_interface *intf) { struct usbnet *dev = usb_get_intfdata(intf); - intf->dev.power.power_state = PMSG_ON; netif_device_attach (dev->net); tasklet_schedule (&dev->bh); return 0; -- cgit v1.2.3 From c9f89fa40cf274130b56475175a35af961d4b165 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:57:04 -0700 Subject: [PATCH] remove suspend-path recursion This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 76 ++++++++------------------------------------------ 1 file changed, 12 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 61341d2f3c0e..d3337d9c31dc 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -453,6 +453,7 @@ static void hub_quiesce(struct usb_hub *hub) { /* stop khubd and related activity */ hub->quiescing = 1; + hub->activating = 0; usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work(&hub->leds); @@ -1613,68 +1614,21 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, return 0; } - /* suspend interface drivers; if this is a hub, it - * suspends the child devices - */ + /* all interfaces must already be suspended */ if (udev->actconfig) { int i; for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *intf; - struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (!intf->dev.driver) - continue; - driver = to_usb_driver(intf->dev.driver); - - if (driver->suspend) { - status = driver->suspend(intf, state); - if (status == 0) - mark_quiesced(intf); - else - dev_err(&intf->dev, - "suspend error %d\n", - status); - } - - /* only drivers with suspend() can ever resume(); - * and after power loss, even they won't. - * bus_rescan_devices() can rebind drivers later. - * - * FIXME the PM core self-deadlocks when unbinding - * drivers during suspend/resume ... everything grabs - * dpm_sem (not a spinlock, ugh). we want to unbind, - * since we know every driver's probe/disconnect works - * even for drivers that can't suspend. - */ - if (!driver->suspend || state.event > PM_EVENT_FREEZE) { -#if 1 - dev_warn(&intf->dev, "resume is unsafe!\n"); -#else - down_write(&usb_bus_type.rwsem); - device_release_driver(&intf->dev); - up_write(&usb_bus_type.rwsem); -#endif + if (is_active(intf)) { + dev_dbg(&intf->dev, "nyet suspended\n"); + return -EBUSY; } } } - /* - * FIXME this needs port power off call paths too, to help force - * USB into the "generic" PM model. At least for devices on - * ports that aren't using ganged switching (usually root hubs). - * - * NOTE: SRP-capable links should adopt more aggressive poweroff - * policies (when HNP doesn't apply) once we have mechanisms to - * turn power back on! (Likely not before 2.7...) - */ - if (state.event > PM_EVENT_FREEZE) { - dev_warn(&udev->dev, "no poweroff yet, suspending instead\n"); - } - /* "global suspend" of the HC-to-USB interface (root hub), or * "selective suspend" of just one hub-device link. */ @@ -1960,26 +1914,20 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev = hub->hdev; unsigned port1; - int status; - - /* stop khubd and related activity */ - hub_quiesce(hub); - /* then suspend every port */ + /* fail if children aren't already suspended */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; udev = hdev->children [port1-1]; - if (!udev) - continue; - down(&udev->serialize); - status = __usb_suspend_device(udev, port1, msg); - up(&udev->serialize); - if (status < 0) - dev_dbg(&intf->dev, "suspend port %d --> %d\n", - port1, status); + if (udev && udev->state != USB_STATE_SUSPENDED) { + dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); + return -EBUSY; + } } + /* stop khubd and related activity */ + hub_quiesce(hub); return 0; } -- cgit v1.2.3 From 390a8c345e6415cbf811232feedac70b56c9fc8d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:57:27 -0700 Subject: [PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-) --- drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d3337d9c31dc..33127b828d60 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1323,11 +1323,9 @@ int usb_new_device(struct usb_device *udev) * (Includes HNP test device.) */ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { - static int __usb_suspend_device (struct usb_device *, - int port1, pm_message_t state); - err = __usb_suspend_device(udev, - udev->bus->otg_port, - PMSG_SUSPEND); + static int __usb_suspend_device(struct usb_device *, + int port1); + err = __usb_suspend_device(udev, udev->bus->otg_port); if (err < 0) dev_dbg(&udev->dev, "HNP fail, %d\n", err); } @@ -1517,7 +1515,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) /* FIXME let caller ask to power down the port: * - some devices won't enumerate without a VBUS power cycle * - SRP saves power that way - * - usb_suspend_device(dev, PMSG_SUSPEND) + * - ... new call, TBD ... * That's easy if this hub can switch power per-port, and * khubd reactivates the port later (timer, SRP, etc). * Powerdown must be optional, because of reset/DFU. @@ -1599,9 +1597,12 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * Other than re-initializing the hub (plug/unplug, except for root hubs), * Linux (2.6) currently has NO mechanisms to initiate that: no khubd * timer, no SRP, no requests through sysfs. + * + * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when + * the root hub for their bus goes into global suspend ... so we don't + * (falsely) update the device power state to say it suspended. */ -static int __usb_suspend_device (struct usb_device *udev, int port1, - pm_message_t state) +static int __usb_suspend_device (struct usb_device *udev, int port1) { int status; @@ -1648,14 +1649,13 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, udev); if (status == 0) - udev->dev.power.power_state = state; + udev->dev.power.power_state = PMSG_SUSPEND; return status; } /** * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use - * @state: PMSG_SUSPEND to suspend * Context: must be able to sleep; device not locked * * Suspends a USB device that isn't in active use, conserving power. @@ -1664,13 +1664,16 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, * suspend by the host, using usb_resume_device(). It's also routine * to disconnect devices while they are suspended. * + * This only affects the USB hardware for a device; its interfaces + * (and, for hubs, child devices) must already have been suspended. + * * Suspending OTG devices may trigger HNP, if that's been enabled * between a pair of dual-role devices. That will change roles, such * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral. * * Returns 0 on success, else negative errno. */ -int usb_suspend_device(struct usb_device *udev, pm_message_t state) +int usb_suspend_device(struct usb_device *udev) { int port1, status; @@ -1678,12 +1681,15 @@ int usb_suspend_device(struct usb_device *udev, pm_message_t state) if (port1 < 0) return port1; - status = __usb_suspend_device(udev, port1, state); + status = __usb_suspend_device(udev, port1); usb_unlock_device(udev); return status; } /* + * If the USB "suspend" state is in use (rather than "global suspend"), + * many devices will be individually taken out of suspend state using + * special" resume" signaling. These routines kick in shortly after * hardware resume signaling is finished, either because of selective * resume (by host) or remote wakeup (by device) ... now see what changed * in the tree that's rooted at this device. @@ -1986,13 +1992,15 @@ void usb_resume_root_hub(struct usb_device *hdev) #else /* !CONFIG_USB_SUSPEND */ -int usb_suspend_device(struct usb_device *udev, pm_message_t state) +int usb_suspend_device(struct usb_device *udev) { + /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */ return 0; } int usb_resume_device(struct usb_device *udev) { + udev->dev.power_state.event = PM_EVENT_ON; return 0; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 6ecfdce4f848..e89dbd43e952 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1414,14 +1414,33 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } +static int verify_suspended(struct device *dev, void *unused) +{ + return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0; +} + static int usb_generic_suspend(struct device *dev, pm_message_t message) { struct usb_interface *intf; struct usb_driver *driver; int status; - if (dev->driver == &usb_generic_driver) - return usb_suspend_device (to_usb_device(dev), message); + /* USB devices enter SUSPEND state through their hubs, but can be + * marked for FREEZE as soon as their children are already idled. + */ + if (dev->driver == &usb_generic_driver) { + if (dev->power.power_state.event == message.event) + return 0; + /* we need to rule out bogus requests through sysfs */ + status = device_for_each_child(dev, NULL, verify_suspended); + if (status) + return status; + if (message.event == PM_EVENT_FREEZE) { + dev->power.power_state = message; + return 0; + } + return usb_suspend_device (to_usb_device(dev)); + } if ((dev->driver == NULL) || (dev->driver_data == &usb_generic_driver_data)) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b3eb02613bff..513fccbb8e43 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -759,7 +759,7 @@ static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message) msleep (100); #ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub, message); + (void) usb_suspend_device (hcd->self.root_hub); #else usb_lock_device (hcd->self.root_hub); (void) ehci_hub_suspend (hcd); diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 642f35068ce2..554d60282a9d 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1781,7 +1781,7 @@ static int isp116x_suspend(struct device *dev, pm_message_t state) VDBG("%s: state %x\n", __func__, state); - ret = usb_suspend_device(hcd->self.root_hub, state); + ret = usb_suspend_device(hcd->self.root_hub); if (!ret) { dev->power.power_state = state; INFO("%s suspended\n", hcd_name); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index eede6be098d2..41e85980fa7a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -119,7 +119,7 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) msleep (100); #ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub, message); + (void) usb_suspend_device (hcd->self.root_hub); #else usb_lock_device (hcd->self.root_hub); (void) ohci_hub_suspend (hcd); diff --git a/include/linux/usb.h b/include/linux/usb.h index 04502e183dd1..25ec91ddcd04 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -976,7 +976,7 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, int timeout); /* selective suspend/resume */ -extern int usb_suspend_device(struct usb_device *dev, pm_message_t message); +extern int usb_suspend_device(struct usb_device *dev); extern int usb_resume_device(struct usb_device *dev); -- cgit v1.2.3 From dbc3887e7df4be78b33a83b97fde5d5f9a389859 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:57:36 -0700 Subject: [PATCH] remove duplicated resume path code This gets rid of some inconsistently duplicated logic to resume interfaces. Similar code was in both finish_port_resume() and in usb_generic_resume(). Now there is just one copy of that code, accessed regardless of whether CONFIG_USB_SUSPEND is enabled. Fault handling is also more consistent. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 33 +++++---------------------------- 1 file changed, 5 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 33127b828d60..b2ae9b6ca4db 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1723,6 +1723,7 @@ static int finish_port_resume(struct usb_device *udev) status); else if (udev->actconfig) { unsigned i; + int (*resume)(struct device *); le16_to_cpus(&devstatus); if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { @@ -1741,35 +1742,11 @@ static int finish_port_resume(struct usb_device *udev) } /* resume interface drivers; if this is a hub, it - * resumes the child devices + * may have a child resume event to deal with soon */ - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - struct usb_interface *intf; - struct usb_driver *driver; - - intf = udev->actconfig->interface[i]; - if (is_active(intf)) - continue; - if (!intf->dev.driver) { - /* FIXME maybe force to alt 0 */ - continue; - } - driver = to_usb_driver(intf->dev.driver); - - /* bus_rescan_devices() may rebind drivers */ - if (!driver->resume) - continue; - - /* can we do better than just logging errors? */ - mark_active(intf); - status = driver->resume(intf); - if (status < 0) { - mark_quiesced(intf); - dev_dbg(&intf->dev, - "resume error %d\n", - status); - } - } + resume = udev->dev.bus->resume; + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) + (void) resume(&udev->actconfig->interface[i]->dev); status = 0; } else if (udev->devnum <= 0) { -- cgit v1.2.3 From 8ad7fe16df5e07320626be83fbba6d1c6bda5ec0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:59:11 -0700 Subject: [PATCH] remove some USB_SUSPEND dependencies This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-) --- drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 14c47a10da86..5e8ade07d7f9 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1431,6 +1431,8 @@ rescan: /*-------------------------------------------------------------------------*/ +/* FIXME make this #ifdef CONFIG_PM ... update root hubs, retest */ + #ifdef CONFIG_USB_SUSPEND static int hcd_hub_suspend (struct usb_bus *bus) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index f8da8c7af7c6..c26ab5f2a403 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -791,7 +791,7 @@ static void ohci_stop (struct usb_hcd *hcd) /* must not be called from interrupt context */ -#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) +#ifdef CONFIG_PM static int ohci_restart (struct ohci_hcd *ohci) { diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index ce7b28da7a15..b96948ea3005 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -36,7 +36,7 @@ /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) +#ifdef CONFIG_PM #define OHCI_SCHED_ENABLES \ (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) @@ -294,7 +294,7 @@ static void ohci_rh_resume (void *_hcd) ohci_dbg(ohci, "rh_resume ??\n"); } -#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */ +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index a574216625a0..e67c07dc426d 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -420,7 +420,7 @@ static const struct hc_driver ohci_omap_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 41e85980fa7a..0afa237b02ad 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -218,7 +218,7 @@ static const struct hc_driver ohci_pci_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 251533363028..ec20710e99fe 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -163,7 +163,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif @@ -196,7 +196,7 @@ static struct device_driver ohci_hcd_ppc_soc_driver = { .bus = &platform_bus_type, .probe = ohci_hcd_ppc_soc_drv_probe, .remove = ohci_hcd_ppc_soc_drv_remove, -#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) +#ifdef CONFIG_PM /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/ /*.resume = ohci_hcd_ppc_soc_drv_resume,*/ #endif diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index f042261ecb8e..986c4f656e22 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -278,7 +278,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index da7d5478f74d..8cf12b2be2a3 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -448,8 +448,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, - -#if defined(CONFIG_USB_SUSPEND) && 0 +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 814d2be4ee7b..7dd1f410b7f1 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -235,7 +235,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif -- cgit v1.2.3 From e08fb39b771dd7dcba405669b5384fe9929e1caf Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 19 Sep 2005 09:40:24 -0700 Subject: [PATCH] USB: Fix usb hub build Signed-off-by: Matt Porter Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b2ae9b6ca4db..660064466791 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1977,7 +1977,7 @@ int usb_suspend_device(struct usb_device *udev) int usb_resume_device(struct usb_device *udev) { - udev->dev.power_state.event = PM_EVENT_ON; + udev->dev.power.power_state.event = PM_EVENT_ON; return 0; } -- cgit v1.2.3 From 8b4cd42134fbd3c9a9a5c3467d31717798219b1b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Sep 2005 14:17:45 -0400 Subject: [PATCH] USB: UHCI: Remove unused fields and unneeded tests for NULL This patch (as562) removes from the uhci-hcd driver a few unused fields and some unnecessary tests against NULL and assignments to NULL. In fact it wasn't until fairly recently that the tests became unnecessary. Before last winter it was possible that the driver's stop() routine would get called even if the start() routine returned an error, but now that can't happen. Hence there's no longer any need to check for partial initialization. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 1 - drivers/usb/host/uhci-hcd.c | 44 ++++++++++--------------------------------- drivers/usb/host/uhci-hcd.h | 3 --- drivers/usb/host/uhci-q.c | 5 ----- 4 files changed, 10 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 4538a98b6f9d..04eddd7995c3 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -348,7 +348,6 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *bu if (urbp->urb->status != -EINPROGRESS) out += sprintf(out, "Status=%d ", urbp->urb->status); - //out += sprintf(out, "Inserttime=%lx ",urbp->inserttime); //out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime); count = 0; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 0c024898cbea..17de9ee910f6 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -437,36 +437,18 @@ static void release_uhci(struct uhci_hcd *uhci) int i; for (i = 0; i < UHCI_NUM_SKELQH; i++) - if (uhci->skelqh[i]) { - uhci_free_qh(uhci, uhci->skelqh[i]); - uhci->skelqh[i] = NULL; - } + uhci_free_qh(uhci, uhci->skelqh[i]); - if (uhci->term_td) { - uhci_free_td(uhci, uhci->term_td); - uhci->term_td = NULL; - } + uhci_free_td(uhci, uhci->term_td); - if (uhci->qh_pool) { - dma_pool_destroy(uhci->qh_pool); - uhci->qh_pool = NULL; - } + dma_pool_destroy(uhci->qh_pool); - if (uhci->td_pool) { - dma_pool_destroy(uhci->td_pool); - uhci->td_pool = NULL; - } + dma_pool_destroy(uhci->td_pool); - if (uhci->fl) { - dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - uhci->fl, uhci->fl->dma_handle); - uhci->fl = NULL; - } + dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), + uhci->fl, uhci->fl->dma_handle); - if (uhci->dentry) { - debugfs_remove(uhci->dentry); - uhci->dentry = NULL; - } + debugfs_remove(uhci->dentry); } static int uhci_reset(struct usb_hcd *hcd) @@ -690,31 +672,25 @@ static int uhci_start(struct usb_hcd *hcd) * error exits: */ err_alloc_skelqh: - for (i = 0; i < UHCI_NUM_SKELQH; i++) - if (uhci->skelqh[i]) { + for (i = 0; i < UHCI_NUM_SKELQH; i++) { + if (uhci->skelqh[i]) uhci_free_qh(uhci, uhci->skelqh[i]); - uhci->skelqh[i] = NULL; - } + } uhci_free_td(uhci, uhci->term_td); - uhci->term_td = NULL; err_alloc_term_td: dma_pool_destroy(uhci->qh_pool); - uhci->qh_pool = NULL; err_create_qh_pool: dma_pool_destroy(uhci->td_pool); - uhci->td_pool = NULL; err_create_td_pool: dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), uhci->fl, uhci->fl->dma_handle); - uhci->fl = NULL; err_alloc_fl: debugfs_remove(uhci->dentry); - uhci->dentry = NULL; err_create_debug_entry: return retval; diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 282f40b75881..1c161b4f5bcf 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -205,8 +205,6 @@ struct uhci_td { /* Software fields */ dma_addr_t dma_handle; - struct urb *urb; - struct list_head list; /* P: urb->lock */ struct list_head remove_list; /* P: uhci->td_remove_list_lock */ @@ -434,7 +432,6 @@ struct urb_priv { /* a control transfer, retrigger */ /* the status phase */ - unsigned long inserttime; /* In jiffies */ unsigned long fsbrtime; /* In jiffies */ struct list_head queue_list; /* P: uhci->frame_list_lock */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 4e0fbe2c1a9a..d54038211ca6 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -443,7 +443,6 @@ static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *u memset((void *)urbp, 0, sizeof(*urbp)); - urbp->inserttime = jiffies; urbp->fsbrtime = jiffies; urbp->urb = urb; @@ -462,8 +461,6 @@ static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td) { struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; - td->urb = urb; - list_add_tail(&td->list, &urbp->td_list); } @@ -473,8 +470,6 @@ static void uhci_remove_td_from_urb(struct uhci_td *td) return; list_del_init(&td->list); - - td->urb = NULL; } static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) -- cgit v1.2.3 From a1d59ce842a35b552f22868404e4e7c923242257 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Sep 2005 14:22:51 -0400 Subject: [PATCH] USB: UHCI: Split apart the physical and logical framelist arrays This patch (as563) splits the physical and logical framelist arrays in uhci-hcd into two separate pieces. This will allow slightly better memory utilization, since each piece is no larger than a single page whereas before the whole thing was a little bigger than two pages. It also allows the logical array to be allocated in non-DMA-coherent memory. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 4 ++-- drivers/usb/host/uhci-hcd.c | 42 +++++++++++++++++++++++++++--------------- drivers/usb/host/uhci-hcd.h | 6 +++++- drivers/usb/host/uhci-q.c | 20 ++++++++++---------- 4 files changed, 44 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 04eddd7995c3..151154df37fa 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -445,11 +445,11 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) out += sprintf(out, "Frame List\n"); for (i = 0; i < UHCI_NUMFRAMES; ++i) { int shown = 0; - td = uhci->fl->frame_cpu[i]; + td = uhci->frame_cpu[i]; if (!td) continue; - if (td->dma_handle != (dma_addr_t)uhci->fl->frame[i]) { + if (td->dma_handle != (dma_addr_t)uhci->frame[i]) { show_frame_num(); out += sprintf(out, " frame list does not match td->dma_handle!\n"); } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 17de9ee910f6..b44094fcd779 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -212,7 +212,7 @@ static void configure_hc(struct uhci_hcd *uhci) outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); /* Store the frame list base address */ - outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD); + outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD); /* Set the current frame number */ outw(uhci->frame_number, uhci->io_addr + USBFRNUM); @@ -445,8 +445,11 @@ static void release_uhci(struct uhci_hcd *uhci) dma_pool_destroy(uhci->td_pool); - dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - uhci->fl, uhci->fl->dma_handle); + kfree(uhci->frame_cpu); + + dma_free_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + uhci->frame, uhci->frame_dma_handle); debugfs_remove(uhci->dentry); } @@ -527,7 +530,6 @@ static int uhci_start(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); int retval = -EBUSY; int i; - dma_addr_t dma_handle; struct dentry *dentry; hcd->uses_new_polling = 1; @@ -561,17 +563,23 @@ static int uhci_start(struct usb_hcd *hcd) init_waitqueue_head(&uhci->waitqh); - uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - &dma_handle, 0); - if (!uhci->fl) { + uhci->frame = dma_alloc_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + &uhci->frame_dma_handle, 0); + if (!uhci->frame) { dev_err(uhci_dev(uhci), "unable to allocate " "consistent memory for frame list\n"); - goto err_alloc_fl; + goto err_alloc_frame; } + memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame)); - memset((void *)uhci->fl, 0, sizeof(*uhci->fl)); - - uhci->fl->dma_handle = dma_handle; + uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu), + GFP_KERNEL); + if (!uhci->frame_cpu) { + dev_err(uhci_dev(uhci), "unable to allocate " + "memory for frame pointers\n"); + goto err_alloc_frame_cpu; + } uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci), sizeof(struct uhci_td), 16, 0); @@ -654,7 +662,7 @@ static int uhci_start(struct usb_hcd *hcd) irq = 7; /* Only place we don't use the frame list routines */ - uhci->fl->frame[i] = UHCI_PTR_QH | + uhci->frame[i] = UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[irq]->dma_handle); } @@ -686,10 +694,14 @@ err_create_qh_pool: dma_pool_destroy(uhci->td_pool); err_create_td_pool: - dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - uhci->fl, uhci->fl->dma_handle); + kfree(uhci->frame_cpu); + +err_alloc_frame_cpu: + dma_free_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + uhci->frame, uhci->frame_dma_handle); -err_alloc_fl: +err_alloc_frame: debugfs_remove(uhci->dentry); err_create_debug_entry: diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 1c161b4f5bcf..b04d99df0a0e 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -359,7 +359,11 @@ struct uhci_hcd { struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ spinlock_t lock; - struct uhci_frame_list *fl; /* P: uhci->lock */ + + dma_addr_t frame_dma_handle; /* Hardware frame list */ + __le32 *frame; /* P: uhci->lock */ + void **frame_cpu; /* CPU's frame list */ + int fsbr; /* Full-speed bandwidth reclamation */ unsigned long fsbrtimeout; /* FSBR delay */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index d54038211ca6..51de06bc438d 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -89,10 +89,10 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, td->frame = framenum; /* Is there a TD already mapped there? */ - if (uhci->fl->frame_cpu[framenum]) { + if (uhci->frame_cpu[framenum]) { struct uhci_td *ftd, *ltd; - ftd = uhci->fl->frame_cpu[framenum]; + ftd = uhci->frame_cpu[framenum]; ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); list_add_tail(&td->fl_list, &ftd->fl_list); @@ -101,10 +101,10 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, wmb(); ltd->link = cpu_to_le32(td->dma_handle); } else { - td->link = uhci->fl->frame[framenum]; + td->link = uhci->frame[framenum]; wmb(); - uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle); - uhci->fl->frame_cpu[framenum] = td; + uhci->frame[framenum] = cpu_to_le32(td->dma_handle); + uhci->frame_cpu[framenum] = td; } } @@ -114,16 +114,16 @@ static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) if (td->frame == -1 && list_empty(&td->fl_list)) return; - if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) { + if (td->frame != -1 && uhci->frame_cpu[td->frame] == td) { if (list_empty(&td->fl_list)) { - uhci->fl->frame[td->frame] = td->link; - uhci->fl->frame_cpu[td->frame] = NULL; + uhci->frame[td->frame] = td->link; + uhci->frame_cpu[td->frame] = NULL; } else { struct uhci_td *ntd; ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list); - uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle); - uhci->fl->frame_cpu[td->frame] = ntd; + uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle); + uhci->frame_cpu[td->frame] = ntd; } } else { struct uhci_td *ptd; -- cgit v1.2.3 From e9b7bd4ee7f6e3ee002dc72c5211cd97c7186d00 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:30:48 -0700 Subject: [PATCH] one less word in struct device This saves a word from "struct device" ... there's a refcounting mechanism stub that's rather ineffective (the values are never even tested!), which can safely be deleted. With this patch it uses normal device refcounting, so any potential users of the pm_parent mechanism will be more correct. (That mechanism is actually unusable for now though; it does nothing.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/base/power/main.c | 26 +++----------------------- include/linux/pm.h | 1 - 2 files changed, 3 insertions(+), 24 deletions(-) --- drivers/base/power/main.c | 26 +++----------------------- include/linux/pm.h | 1 - 2 files changed, 3 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 15e6a8f951f1..0d2e101e4f15 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -30,23 +30,6 @@ LIST_HEAD(dpm_off_irq); DECLARE_MUTEX(dpm_sem); DECLARE_MUTEX(dpm_list_sem); -/* - * PM Reference Counting. - */ - -static inline void device_pm_hold(struct device * dev) -{ - if (dev) - atomic_inc(&dev->power.pm_users); -} - -static inline void device_pm_release(struct device * dev) -{ - if (dev) - atomic_dec(&dev->power.pm_users); -} - - /** * device_pm_set_parent - Specify power dependency. * @dev: Device who needs power. @@ -62,10 +45,8 @@ static inline void device_pm_release(struct device * dev) void device_pm_set_parent(struct device * dev, struct device * parent) { - struct device * old_parent = dev->power.pm_parent; - device_pm_release(old_parent); - dev->power.pm_parent = parent; - device_pm_hold(parent); + put_device(dev->power.pm_parent); + dev->power.pm_parent = get_device(parent); } EXPORT_SYMBOL_GPL(device_pm_set_parent); @@ -75,7 +56,6 @@ int device_pm_add(struct device * dev) pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", dev->kobj.name); - atomic_set(&dev->power.pm_users, 0); down(&dpm_list_sem); list_add_tail(&dev->power.entry, &dpm_active); device_pm_set_parent(dev, dev->parent); @@ -91,7 +71,7 @@ void device_pm_remove(struct device * dev) dev->bus ? dev->bus->name : "No Bus", dev->kobj.name); down(&dpm_list_sem); dpm_sysfs_remove(dev); - device_pm_release(dev->power.pm_parent); + put_device(dev->power.pm_parent); list_del_init(&dev->power.entry); up(&dpm_list_sem); } diff --git a/include/linux/pm.h b/include/linux/pm.h index 7897cf500c51..83bae1cbe55b 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -224,7 +224,6 @@ struct dev_pm_info { unsigned should_wakeup:1; pm_message_t prev_state; void * saved_state; - atomic_t pm_users; struct device * pm_parent; struct list_head entry; #endif -- cgit v1.2.3 From 7ff71d6adf81a43505b7cbaa034e4063d3439182 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Thu, 22 Sep 2005 22:31:15 -0700 Subject: [PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-) --- drivers/usb/host/ehci-hcd.c | 537 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 ++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 + 3 files changed, 489 insertions(+), 463 deletions(-) create mode 100644 drivers/usb/host/ehci-pci.c (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 513fccbb8e43..af3c05eb86fc 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -300,44 +300,6 @@ static void ehci_watchdog (unsigned long param) spin_unlock_irqrestore (&ehci->lock, flags); } -#ifdef CONFIG_PCI - -/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... - * off the controller (maybe it can boot from highspeed USB disks). - */ -static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) -{ - struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); - - /* always say Linux will own the hardware */ - pci_write_config_byte(pdev, where + 3, 1); - - /* maybe wait a while for BIOS to respond */ - if (cap & (1 << 16)) { - int msec = 5000; - - do { - msleep(10); - msec -= 10; - pci_read_config_dword(pdev, where, &cap); - } while ((cap & (1 << 16)) && msec); - if (cap & (1 << 16)) { - ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n", - where, cap); - // some BIOS versions seem buggy... - // return 1; - ehci_warn (ehci, "continuing after BIOS bug...\n"); - /* disable all SMIs, and clear "BIOS owns" flag */ - pci_write_config_dword(pdev, where + 4, 0); - pci_write_config_byte(pdev, where + 2, 0); - } else - ehci_dbg(ehci, "BIOS handoff succeeded\n"); - } - return 0; -} - -#endif - /* Reboot notifiers kick in for silicon on any bus (not just pci, etc). * This forcibly disables dma and IRQs, helping kexec and other cases * where the next system software may expect clean state. @@ -371,156 +333,90 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on) msleep(20); } +/*-------------------------------------------------------------------------*/ -/* called by khubd or root hub init threads */ +/* + * ehci_work is called from some interrupts, timers, and so on. + * it calls driver completion functions, after dropping ehci->lock. + */ +static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) +{ + timer_action_done (ehci, TIMER_IO_WATCHDOG); + if (ehci->reclaim_ready) + end_unlink_async (ehci, regs); + + /* another CPU may drop ehci->lock during a schedule scan while + * it reports urb completions. this flag guards against bogus + * attempts at re-entrant schedule scanning. + */ + if (ehci->scanning) + return; + ehci->scanning = 1; + scan_async (ehci, regs); + if (ehci->next_uframe != -1) + scan_periodic (ehci, regs); + ehci->scanning = 0; + + /* the IO watchdog guards against hardware or driver bugs that + * misplace IRQs, and should let us run completely without IRQs. + * such lossage has been observed on both VT6202 and VT8235. + */ + if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && + (ehci->async->qh_next.ptr != NULL || + ehci->periodic_sched != 0)) + timer_action (ehci, TIMER_IO_WATCHDOG); +} -static int ehci_hc_reset (struct usb_hcd *hcd) +static void ehci_stop (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp; - unsigned count = 256/4; - spin_lock_init (&ehci->lock); + ehci_dbg (ehci, "stop\n"); - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); - dbg_hcs_params (ehci, "reset"); - dbg_hcc_params (ehci, "reset"); + /* Turn off port power on all root hub ports. */ + ehci_port_power (ehci, 0); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl (&ehci->caps->hcs_params); + /* no more interrupts ... */ + del_timer_sync (&ehci->watchdog); -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + spin_lock_irq(&ehci->lock); + if (HC_IS_RUNNING (hcd->state)) + ehci_quiesce (ehci); - switch (pdev->vendor) { - case PCI_VENDOR_ID_TDI: - if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { - ehci->is_tdi_rh_tt = 1; - tdi_reset (ehci); - } - break; - case PCI_VENDOR_ID_AMD: - /* AMD8111 EHCI doesn't work, according to AMD errata */ - if (pdev->device == 0x7463) { - ehci_info (ehci, "ignoring AMD8111 (errata)\n"); - return -EIO; - } - break; - case PCI_VENDOR_ID_NVIDIA: - /* NVidia reports that certain chips don't handle - * QH, ITD, or SITD addresses above 2GB. (But TD, - * data buffer, and periodic schedule are normal.) - */ - switch (pdev->device) { - case 0x003c: /* MCP04 */ - case 0x005b: /* CK804 */ - case 0x00d8: /* CK8 */ - case 0x00e8: /* CK8S */ - if (pci_set_consistent_dma_mask(pdev, - DMA_31BIT_MASK) < 0) - ehci_warn (ehci, "can't enable NVidia " - "workaround for >2GB RAM\n"); - break; - } - break; - } + ehci_reset (ehci); + writel (0, &ehci->regs->intr_enable); + spin_unlock_irq(&ehci->lock); - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability (pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = hcd->regs + temp; - temp = readl (&ehci->debug->control); - ehci_info (ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } + /* let companion controllers work when we aren't */ + writel (0, &ehci->regs->configured_flag); + unregister_reboot_notifier (&ehci->reboot_notifier); - temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); - } else - temp = 0; - - /* EHCI 0.96 and later may have "extended capabilities" */ - while (temp && count--) { - u32 cap; - - pci_read_config_dword (to_pci_dev(hcd->self.controller), - temp, &cap); - ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); - switch (cap & 0xff) { - case 1: /* BIOS/SMM/... handoff */ - if (bios_handoff (ehci, temp, cap) != 0) - return -EOPNOTSUPP; - break; - case 0: /* illegal reserved capability */ - ehci_warn (ehci, "illegal capability!\n"); - cap = 0; - /* FALLTHROUGH */ - default: /* unknown */ - break; - } - temp = (cap >> 8) & 0xff; - } - if (!count) { - ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); - return -EIO; - } - if (ehci_is_TDI(ehci)) - ehci_reset (ehci); -#endif + remove_debug_files (ehci); - ehci_port_power (ehci, 0); + /* root hub is shut down separately (first, when possible) */ + spin_lock_irq (&ehci->lock); + if (ehci->async) + ehci_work (ehci, NULL); + spin_unlock_irq (&ehci->lock); + ehci_mem_cleanup (ehci); - /* at least the Genesys GL880S needs fixup here */ - temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); - temp &= 0x0f; - if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { - ehci_dbg (ehci, "bogus port configuration: " - "cc=%d x pcc=%d < ports=%d\n", - HCS_N_CC(ehci->hcs_params), - HCS_N_PCC(ehci->hcs_params), - HCS_N_PORTS(ehci->hcs_params)); - -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - - pdev = to_pci_dev(hcd->self.controller); - switch (pdev->vendor) { - case 0x17a0: /* GENESYS */ - /* GL880S: should be PORTS=2 */ - temp |= (ehci->hcs_params & ~0xf); - ehci->hcs_params = temp; - break; - case PCI_VENDOR_ID_NVIDIA: - /* NF4: should be PCC=10 */ - break; - } - } +#ifdef EHCI_STATS + ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", + ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, + ehci->stats.lost_iaa); + ehci_dbg (ehci, "complete %ld unlink %ld\n", + ehci->stats.complete, ehci->stats.unlink); #endif - } - /* force HC to halt state */ - return ehci_halt (ehci); + dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); } -static int ehci_start (struct usb_hcd *hcd) +static int ehci_run (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; int retval; u32 hcc_params; - u8 sbrn = 0; int first; /* skip some things on restart paths */ @@ -559,27 +455,6 @@ static int ehci_start (struct usb_hcd *hcd) } writel (ehci->periodic_dma, &ehci->regs->frame_list); -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - u16 port_wake; - - pdev = to_pci_dev(hcd->self.controller); - - /* Serial Bus Release Number is at PCI 0x60 offset */ - pci_read_config_byte(pdev, 0x60, &sbrn); - - /* port wake capability, reported by boot firmware */ - pci_read_config_word(pdev, 0x62, &port_wake); - hcd->can_wakeup = (port_wake & 1) != 0; - - /* help hc dma work well with cachelines */ - retval = pci_set_mwi(pdev); - if (retval) - ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); - } -#endif - /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it @@ -675,7 +550,7 @@ static int ehci_start (struct usb_hcd *hcd) temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, "USB %x.%x %s, EHCI %x.%02x, driver %s\n", - ((sbrn & 0xf0)>>4), (sbrn & 0x0f), + ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), first ? "initialized" : "restarted", temp >> 8, temp & 0xff, DRIVER_VERSION); @@ -687,188 +562,6 @@ static int ehci_start (struct usb_hcd *hcd) return 0; } -/* always called by thread; normally rmmod */ - -static void ehci_stop (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - - ehci_dbg (ehci, "stop\n"); - - /* Turn off port power on all root hub ports. */ - ehci_port_power (ehci, 0); - - /* no more interrupts ... */ - del_timer_sync (&ehci->watchdog); - - spin_lock_irq(&ehci->lock); - if (HC_IS_RUNNING (hcd->state)) - ehci_quiesce (ehci); - - ehci_reset (ehci); - writel (0, &ehci->regs->intr_enable); - spin_unlock_irq(&ehci->lock); - - /* let companion controllers work when we aren't */ - writel (0, &ehci->regs->configured_flag); - unregister_reboot_notifier (&ehci->reboot_notifier); - - remove_debug_files (ehci); - - /* root hub is shut down separately (first, when possible) */ - spin_lock_irq (&ehci->lock); - if (ehci->async) - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - ehci_mem_cleanup (ehci); - -#ifdef EHCI_STATS - ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", - ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, - ehci->stats.lost_iaa); - ehci_dbg (ehci, "complete %ld unlink %ld\n", - ehci->stats.complete, ehci->stats.unlink); -#endif - - dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); -} - -static int ehci_get_frame (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size; -} - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_PM - -/* suspend/resume, section 4.3 */ - -/* These routines rely on the bus (pci, platform, etc) - * to handle powerdown and wakeup, and currently also on - * transceivers that don't need any software attention to set up - * the right sort of wakeup. - */ - -static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); - -#ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - (void) ehci_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - - // save (PCI) FLADJ in case of Vaux power loss - // ... we'd only use it to handle clock skew - - return 0; -} - -static int ehci_resume (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - unsigned port; - struct usb_device *root = hcd->self.root_hub; - int retval = -EINVAL; - - // maybe restore (PCI) FLADJ - - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); - - /* If any port is suspended (or owned by the companion), - * we know we can/must resume the HC (and mustn't reset it). - */ - for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { - u32 status; - port--; - status = readl (&ehci->regs->port_status [port]); - if (!(status & PORT_POWER)) - continue; - if (status & (PORT_SUSPEND | PORT_OWNER)) { - down (&hcd->self.root_hub->serialize); - retval = ehci_hub_resume (hcd); - up (&hcd->self.root_hub->serialize); - break; - } - if (!root->children [port]) - continue; - dbg_port (ehci, __FUNCTION__, port + 1, status); - usb_set_device_state (root->children[port], - USB_STATE_NOTATTACHED); - } - - /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having activated BIOS during reboot. - */ - if (port == 0) { - (void) ehci_halt (ehci); - (void) ehci_reset (ehci); - (void) ehci_hc_reset (hcd); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq (&ehci->lock); - if (ehci->reclaim) - ehci->reclaim_ready = 1; - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - - /* restart; khubd will disconnect devices */ - retval = ehci_start (hcd); - - /* here we "know" root ports should always stay powered; - * but some controllers may lose all power. - */ - ehci_port_power (ehci, 1); - } - - return retval; -} - -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * ehci_work is called from some interrupts, timers, and so on. - * it calls driver completion functions, after dropping ehci->lock. - */ -static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) -{ - timer_action_done (ehci, TIMER_IO_WATCHDOG); - if (ehci->reclaim_ready) - end_unlink_async (ehci, regs); - - /* another CPU may drop ehci->lock during a schedule scan while - * it reports urb completions. this flag guards against bogus - * attempts at re-entrant schedule scanning. - */ - if (ehci->scanning) - return; - ehci->scanning = 1; - scan_async (ehci, regs); - if (ehci->next_uframe != -1) - scan_periodic (ehci, regs); - ehci->scanning = 0; - - /* the IO watchdog guards against hardware or driver bugs that - * misplace IRQs, and should let us run completely without IRQs. - * such lossage has been observed on both VT6202 and VT8235. - */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && - (ehci->async->qh_next.ptr != NULL || - ehci->periodic_sched != 0)) - timer_action (ehci, TIMER_IO_WATCHDOG); -} - /*-------------------------------------------------------------------------*/ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) @@ -1179,106 +872,24 @@ done: return; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ehci_driver = { - .description = hcd_name, - .product_desc = "EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_hc_reset, - .start = ehci_start, -#ifdef CONFIG_PM - .suspend = ehci_suspend, - .resume = ehci_resume, -#endif - .stop = ehci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, -}; +static int ehci_get_frame (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size; +} /*-------------------------------------------------------------------------*/ -/* EHCI 1.0 doesn't require PCI */ - -#ifdef CONFIG_PCI - -/* PCI driver selection metadata; PCI hotplugging uses this */ -static const struct pci_device_id pci_ids [] = { { - /* handle any USB 2.0 EHCI controller */ - PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), - .driver_data = (unsigned long) &ehci_driver, - }, - { /* end: all zeroes */ } -}; -MODULE_DEVICE_TABLE (pci, pci_ids); - -/* pci driver glue; this is a "new style" PCI driver module */ -static struct pci_driver ehci_pci_driver = { - .name = (char *) hcd_name, - .id_table = pci_ids, - - .probe = usb_hcd_pci_probe, - .remove = usb_hcd_pci_remove, - -#ifdef CONFIG_PM - .suspend = usb_hcd_pci_suspend, - .resume = usb_hcd_pci_resume, -#endif -}; - -#endif /* PCI */ - - #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC MODULE_DESCRIPTION (DRIVER_INFO); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); -static int __init init (void) -{ - if (usb_disabled()) - return -ENODEV; - - pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", - hcd_name, - sizeof (struct ehci_qh), sizeof (struct ehci_qtd), - sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); - - return pci_register_driver (&ehci_pci_driver); -} -module_init (init); +#ifdef CONFIG_PCI +#include "ehci-pci.c" +#endif -static void __exit cleanup (void) -{ - pci_unregister_driver (&ehci_pci_driver); -} -module_exit (cleanup); +#if !defined(CONFIG_PCI) +#error "missing bus glue for ehci-hcd" +#endif diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c new file mode 100644 index 000000000000..66ebf75b2037 --- /dev/null +++ b/drivers/usb/host/ehci-pci.c @@ -0,0 +1,414 @@ +/* + * EHCI HCD (Host Controller Driver) PCI Bus Glue. + * + * Copyright (c) 2000-2004 by David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CONFIG_PCI +#error "This file is PCI bus glue. CONFIG_PCI must be defined." +#endif + +/*-------------------------------------------------------------------------*/ + +/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... + * off the controller (maybe it can boot from highspeed USB disks). + */ +static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) +{ + struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); + + /* always say Linux will own the hardware */ + pci_write_config_byte(pdev, where + 3, 1); + + /* maybe wait a while for BIOS to respond */ + if (cap & (1 << 16)) { + int msec = 5000; + + do { + msleep(10); + msec -= 10; + pci_read_config_dword(pdev, where, &cap); + } while ((cap & (1 << 16)) && msec); + if (cap & (1 << 16)) { + ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n", + where, cap); + // some BIOS versions seem buggy... + // return 1; + ehci_warn (ehci, "continuing after BIOS bug...\n"); + /* disable all SMIs, and clear "BIOS owns" flag */ + pci_write_config_dword(pdev, where + 4, 0); + pci_write_config_byte(pdev, where + 2, 0); + } else + ehci_dbg(ehci, "BIOS handoff succeeded\n"); + } + return 0; +} + +/* called by khubd or root hub init threads */ +static int ehci_pci_reset (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + u32 temp; + unsigned count = 256/4; + + spin_lock_init (&ehci->lock); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); + dbg_hcs_params (ehci, "reset"); + dbg_hcc_params (ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl (&ehci->caps->hcs_params); + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + switch (pdev->vendor) { + case PCI_VENDOR_ID_TDI: + if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { + ehci->is_tdi_rh_tt = 1; + tdi_reset (ehci); + } + break; + case PCI_VENDOR_ID_AMD: + /* AMD8111 EHCI doesn't work, according to AMD errata */ + if (pdev->device == 0x7463) { + ehci_info (ehci, "ignoring AMD8111 (errata)\n"); + return -EIO; + } + break; + case PCI_VENDOR_ID_NVIDIA: + /* NVidia reports that certain chips don't handle + * QH, ITD, or SITD addresses above 2GB. (But TD, + * data buffer, and periodic schedule are normal.) + */ + switch (pdev->device) { + case 0x003c: /* MCP04 */ + case 0x005b: /* CK804 */ + case 0x00d8: /* CK8 */ + case 0x00e8: /* CK8S */ + if (pci_set_consistent_dma_mask(pdev, + DMA_31BIT_MASK) < 0) + ehci_warn (ehci, "can't enable NVidia " + "workaround for >2GB RAM\n"); + break; + } + break; + } + + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability (pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = readl (&ehci->debug->control); + ehci_info (ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + + temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); + } else + temp = 0; + + /* EHCI 0.96 and later may have "extended capabilities" */ + while (temp && count--) { + u32 cap; + + pci_read_config_dword (to_pci_dev(hcd->self.controller), + temp, &cap); + ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); + switch (cap & 0xff) { + case 1: /* BIOS/SMM/... handoff */ + if (bios_handoff (ehci, temp, cap) != 0) + return -EOPNOTSUPP; + break; + case 0: /* illegal reserved capability */ + ehci_warn (ehci, "illegal capability!\n"); + cap = 0; + /* FALLTHROUGH */ + default: /* unknown */ + break; + } + temp = (cap >> 8) & 0xff; + } + if (!count) { + ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); + return -EIO; + } + if (ehci_is_TDI(ehci)) + ehci_reset (ehci); + + ehci_port_power (ehci, 0); + + /* at least the Genesys GL880S needs fixup here */ + temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); + temp &= 0x0f; + if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { + ehci_dbg (ehci, "bogus port configuration: " + "cc=%d x pcc=%d < ports=%d\n", + HCS_N_CC(ehci->hcs_params), + HCS_N_PCC(ehci->hcs_params), + HCS_N_PORTS(ehci->hcs_params)); + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev; + + pdev = to_pci_dev(hcd->self.controller); + switch (pdev->vendor) { + case 0x17a0: /* GENESYS */ + /* GL880S: should be PORTS=2 */ + temp |= (ehci->hcs_params & ~0xf); + ehci->hcs_params = temp; + break; + case PCI_VENDOR_ID_NVIDIA: + /* NF4: should be PCC=10 */ + break; + } + } + } + + /* force HC to halt state */ + return ehci_halt (ehci); +} + +static int ehci_pci_start (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + int result = 0; + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev; + u16 port_wake; + + pdev = to_pci_dev(hcd->self.controller); + + /* Serial Bus Release Number is at PCI 0x60 offset */ + pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + + /* port wake capability, reported by boot firmware */ + pci_read_config_word(pdev, 0x62, &port_wake); + hcd->can_wakeup = (port_wake & 1) != 0; + + /* help hc dma work well with cachelines */ + result = pci_set_mwi(pdev); + if (result) + ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); + } + + return ehci_run (hcd); +} + +/* always called by thread; normally rmmod */ + +static void ehci_pci_stop (struct usb_hcd *hcd) +{ + ehci_stop (hcd); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* suspend/resume, section 4.3 */ + +/* These routines rely on the bus (pci, platform, etc) + * to handle powerdown and wakeup, and currently also on + * transceivers that don't need any software attention to set up + * the right sort of wakeup. + */ + +static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + + if (time_before (jiffies, ehci->next_statechange)) + msleep (100); + +#ifdef CONFIG_USB_SUSPEND + (void) usb_suspend_device (hcd->self.root_hub); +#else + usb_lock_device (hcd->self.root_hub); + (void) ehci_hub_suspend (hcd); + usb_unlock_device (hcd->self.root_hub); +#endif + + // save (PCI) FLADJ in case of Vaux power loss + // ... we'd only use it to handle clock skew + + return 0; +} + +static int ehci_pci_resume (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + unsigned port; + struct usb_device *root = hcd->self.root_hub; + int retval = -EINVAL; + + // maybe restore (PCI) FLADJ + + if (time_before (jiffies, ehci->next_statechange)) + msleep (100); + + /* If any port is suspended (or owned by the companion), + * we know we can/must resume the HC (and mustn't reset it). + */ + for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { + u32 status; + port--; + status = readl (&ehci->regs->port_status [port]); + if (!(status & PORT_POWER)) + continue; + if (status & (PORT_SUSPEND | PORT_OWNER)) { + down (&hcd->self.root_hub->serialize); + retval = ehci_hub_resume (hcd); + up (&hcd->self.root_hub->serialize); + break; + } + if (!root->children [port]) + continue; + dbg_port (ehci, __FUNCTION__, port + 1, status); + usb_set_device_state (root->children[port], + USB_STATE_NOTATTACHED); + } + + /* Else reset, to cope with power loss or flush-to-storage + * style "resume" having activated BIOS during reboot. + */ + if (port == 0) { + (void) ehci_halt (ehci); + (void) ehci_reset (ehci); + (void) ehci_pci_reset (hcd); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq (&ehci->lock); + if (ehci->reclaim) + ehci->reclaim_ready = 1; + ehci_work (ehci, NULL); + spin_unlock_irq (&ehci->lock); + + /* restart; khubd will disconnect devices */ + retval = ehci_run (hcd); + + /* here we "know" root ports should always stay powered; + * but some controllers may lose all power. + */ + ehci_port_power (ehci, 1); + } + + return retval; +} +#endif + +static const struct hc_driver ehci_pci_hc_driver = { + .description = hcd_name, + .product_desc = "EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_pci_reset, + .start = ehci_pci_start, +#ifdef CONFIG_PM + .suspend = ehci_pci_suspend, + .resume = ehci_pci_resume, +#endif + .stop = ehci_pci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .hub_suspend = ehci_hub_suspend, + .hub_resume = ehci_hub_resume, +}; + +/*-------------------------------------------------------------------------*/ + +/* PCI driver selection metadata; PCI hotplugging uses this */ +static const struct pci_device_id pci_ids [] = { { + /* handle any USB 2.0 EHCI controller */ + PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), + .driver_data = (unsigned long) &ehci_pci_hc_driver, + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver ehci_pci_driver = { + .name = (char *) hcd_name, + .id_table = pci_ids, + + .probe = usb_hcd_pci_probe, + .remove = usb_hcd_pci_remove, + +#ifdef CONFIG_PM + .suspend = usb_hcd_pci_suspend, + .resume = usb_hcd_pci_resume, +#endif +}; + +static int __init ehci_hcd_pci_init (void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", + hcd_name, + sizeof (struct ehci_qh), sizeof (struct ehci_qtd), + sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); + + return pci_register_driver (&ehci_pci_driver); +} +module_init (ehci_hcd_pci_init); + +static void __exit ehci_hcd_pci_cleanup (void) +{ + pci_unregister_driver (&ehci_pci_driver); +} +module_exit (ehci_hcd_pci_cleanup); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index f34a0516d35f..18e257c2bdb5 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -97,6 +97,7 @@ struct ehci_hcd { /* one per controller */ #else # define COUNT(x) do {} while (0) #endif + u8 sbrn; /* packed release number */ }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ -- cgit v1.2.3 From 9293677af3dace2645dec0d0808efa02d36bf47b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:32:11 -0700 Subject: [PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-) --- drivers/usb/core/hcd.c | 42 ++++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 +++++ drivers/usb/host/ohci-lh7a404.c | 5 +++++ drivers/usb/host/ohci-pxa27x.c | 1 + drivers/usb/host/ohci-s3c2410.c | 1 + drivers/usb/host/ohci-sa1111.c | 1 + 6 files changed, 40 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 5e8ade07d7f9..375382f9d671 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1431,28 +1431,44 @@ rescan: /*-------------------------------------------------------------------------*/ -/* FIXME make this #ifdef CONFIG_PM ... update root hubs, retest */ - -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM static int hcd_hub_suspend (struct usb_bus *bus) { struct usb_hcd *hcd; + int status; hcd = container_of (bus, struct usb_hcd, self); - if (hcd->driver->hub_suspend) - return hcd->driver->hub_suspend (hcd); - return 0; + if (!hcd->driver->hub_suspend) + return -ENOENT; + hcd->state = HC_STATE_QUIESCING; + status = hcd->driver->hub_suspend (hcd); + if (status == 0) + hcd->state = HC_STATE_SUSPENDED; + else + dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + "suspend", status); + return status; } static int hcd_hub_resume (struct usb_bus *bus) { struct usb_hcd *hcd; + int status; hcd = container_of (bus, struct usb_hcd, self); - if (hcd->driver->hub_resume) - return hcd->driver->hub_resume (hcd); - return 0; + if (!hcd->driver->hub_resume) + return -ENOENT; + hcd->state = HC_STATE_RESUMING; + status = hcd->driver->hub_resume (hcd); + if (status == 0) + hcd->state = HC_STATE_RUNNING; + else { + dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + "resume", status); + usb_hc_died(hcd); + } + return status; } /** @@ -1473,13 +1489,9 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) usb_resume_root_hub (hcd->self.root_hub); spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } +EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#else -void usb_hcd_resume_root_hub (struct usb_hcd *hcd) -{ -} #endif -EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); /*-------------------------------------------------------------------------*/ @@ -1532,7 +1544,7 @@ static struct usb_operations usb_hcd_operations = { .buffer_alloc = hcd_buffer_alloc, .buffer_free = hcd_buffer_free, .disable = hcd_endpoint_disable, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = hcd_hub_suspend, .hub_resume = hcd_hub_resume, #endif diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 3981bf15c8c7..550d67a554f6 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -214,6 +214,11 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .hub_suspend = ohci_hub_suspend, + .hub_resume = ohci_hub_resume, +#endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 859aca7be753..71d975ae78bd 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -193,6 +193,11 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .hub_suspend = ohci_hub_suspend, + .hub_resume = ohci_hub_resume, +#endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 986c4f656e22..2e7b48502a3d 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -282,6 +282,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 8cf12b2be2a3..922e2a6f46ef 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -452,6 +452,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif + .start_port_reset = ohci_start_port_reset, }; /* device driver */ diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 7dd1f410b7f1..13324b7f9c59 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -239,6 +239,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 979d5199fee9e80290ddeb532e5993bd15506712 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:32:24 -0700 Subject: [PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-) --- drivers/base/power/runtime.c | 1 + drivers/usb/core/hcd.c | 64 +++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 + drivers/usb/core/hub.c | 45 +++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++----- drivers/usb/core/usb.h | 1 + 6 files changed, 111 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index e8f0519f5dfa..adbc3148c039 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -36,6 +36,7 @@ void dpm_runtime_resume(struct device * dev) runtime_resume(dev); up(&dpm_sem); } +EXPORT_SYMBOL(dpm_runtime_resume); /** diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 375382f9d671..de59bb515315 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1143,10 +1143,20 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags) else switch (hcd->state) { case HC_STATE_RUNNING: case HC_STATE_RESUMING: +doit: usb_get_dev (urb->dev); list_add_tail (&urb->urb_list, &ep->urb_list); status = 0; break; + case HC_STATE_SUSPENDED: + /* HC upstream links (register access, wakeup signaling) can work + * even when the downstream links (and DMA etc) are quiesced; let + * usbcore talk to the root hub. + */ + if (hcd->self.controller->power.power_state.event == PM_EVENT_ON + && urb->dev->parent == NULL) + goto doit; + /* FALL THROUGH */ default: status = -ESHUTDOWN; break; @@ -1294,12 +1304,6 @@ static int hcd_unlink_urb (struct urb *urb, int status) goto done; } - /* running ~= hc unlink handshake works (irq, timer, etc) - * halted ~= no unlink handshake is needed - * suspended, resuming == should never happen - */ - WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT); - /* insist the urb is still queued */ list_for_each(tmp, &ep->urb_list) { if (tmp == &urb->urb_list) @@ -1459,6 +1463,8 @@ static int hcd_hub_resume (struct usb_bus *bus) hcd = container_of (bus, struct usb_hcd, self); if (!hcd->driver->hub_resume) return -ENOENT; + if (hcd->state == HC_STATE_RUNNING) + return 0; hcd->state = HC_STATE_RESUMING; status = hcd->driver->hub_resume (hcd); if (status == 0) @@ -1471,6 +1477,50 @@ static int hcd_hub_resume (struct usb_bus *bus) return status; } +/* + * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports + * @hcd: host controller for this root hub + * + * This call arranges that usb_hcd_resume_root_hub() is safe to call later; + * that the HCD's root hub polling is deactivated; and that the root's hub + * driver is suspended. HCDs may call this to autosuspend when their root + * hub's downstream ports are all inactive: unpowered, disconnected, + * disabled, or suspended. + * + * The HCD will autoresume on device connect change detection (using SRP + * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling + * from any ports that are suspended (if that is enabled). In most cases, + * overcurrent signaling (on powered ports) will also start autoresume. + * + * Always called with IRQs blocked. + */ +void usb_hcd_suspend_root_hub (struct usb_hcd *hcd) +{ + struct urb *urb; + + spin_lock (&hcd_root_hub_lock); + usb_suspend_root_hub (hcd->self.root_hub); + + /* force status urb to complete/unlink while suspended */ + if (hcd->status_urb) { + urb = hcd->status_urb; + urb->status = -ECONNRESET; + urb->hcpriv = NULL; + urb->actual_length = 0; + + del_timer (&hcd->rh_timer); + hcd->poll_pending = 0; + hcd->status_urb = NULL; + } else + urb = NULL; + spin_unlock (&hcd_root_hub_lock); + hcd->state = HC_STATE_SUSPENDED; + + if (urb) + usb_hcd_giveback_urb (hcd, urb, NULL); +} +EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub); + /** * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub @@ -1478,7 +1528,7 @@ static int hcd_hub_resume (struct usb_bus *bus) * The USB host controller calls this function when its root hub is * suspended (with the remote wakeup feature enabled) and a remote * wakeup request is received. It queues a request for khubd to - * resume the root hub. + * resume the root hub (that is, manage its downstream ports again). */ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) { diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 1f1ed6211af8..eb21f13c5c74 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -355,6 +355,7 @@ extern long usb_calc_bus_time (int speed, int is_input, extern struct usb_bus *usb_alloc_bus (struct usb_operations *); +extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); extern void usb_set_device_state(struct usb_device *udev, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 660064466791..3c8d8d1f993c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -449,11 +449,18 @@ static void hub_power_on(struct usb_hub *hub) msleep(max(pgood_delay, (unsigned) 100)); } -static void hub_quiesce(struct usb_hub *hub) +static inline void __hub_quiesce(struct usb_hub *hub) { - /* stop khubd and related activity */ + /* (nonblocking) khubd and related activity won't re-trigger */ hub->quiescing = 1; hub->activating = 0; + hub->resume_root_hub = 0; +} + +static void hub_quiesce(struct usb_hub *hub) +{ + /* (blocking) stop khubd and related activity */ + __hub_quiesce(hub); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work(&hub->leds); @@ -467,6 +474,7 @@ static void hub_activate(struct usb_hub *hub) hub->quiescing = 0; hub->activating = 1; + hub->resume_root_hub = 0; status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) dev_err(hub->intfdev, "activate --> %d\n", status); @@ -1959,6 +1967,18 @@ static int hub_resume(struct usb_interface *intf) return 0; } +void usb_suspend_root_hub(struct usb_device *hdev) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + /* This also makes any led blinker stop retriggering. We're called + * from irq, so the blinker might still be scheduled. Caller promises + * that the root hub status URB will be canceled. + */ + __hub_quiesce(hub); + mark_quiesced(to_usb_interface(hub->intfdev)); +} + void usb_resume_root_hub(struct usb_device *hdev) { struct usb_hub *hub = hdev_to_hub(hdev); @@ -2616,21 +2636,30 @@ static void hub_events(void) intf = to_usb_interface(hub->intfdev); hub_dev = &intf->dev; - dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", + i = hub->resume_root_hub; + + dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n", hdev->state, hub->descriptor ? hub->descriptor->bNbrPorts : 0, /* NOTE: expects max 15 ports... */ (u16) hub->change_bits[0], - (u16) hub->event_bits[0]); + (u16) hub->event_bits[0], + i ? ", resume root" : ""); usb_get_intf(intf); - i = hub->resume_root_hub; spin_unlock_irq(&hub_event_lock); - /* Is this is a root hub wanting to be resumed? */ - if (i) - usb_resume_device(hdev); + /* Is this is a root hub wanting to reactivate the downstream + * ports? If so, be sure the interface resumes even if its + * stub "device" node was never suspended. + */ + if (i) { + extern void dpm_runtime_resume(struct device *); + + dpm_runtime_resume(&hdev->dev); + dpm_runtime_resume(&intf->dev); + } /* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e89dbd43e952..2493e7d9f5b3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1427,6 +1427,7 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) /* USB devices enter SUSPEND state through their hubs, but can be * marked for FREEZE as soon as their children are already idled. + * But those semantics are useless, so we equate the two (sigh). */ if (dev->driver == &usb_generic_driver) { if (dev->power.power_state.event == message.event) @@ -1435,10 +1436,6 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) status = device_for_each_child(dev, NULL, verify_suspended); if (status) return status; - if (message.event == PM_EVENT_FREEZE) { - dev->power.power_state = message; - return 0; - } return usb_suspend_device (to_usb_device(dev)); } @@ -1471,14 +1468,22 @@ static int usb_generic_resume(struct device *dev) { struct usb_interface *intf; struct usb_driver *driver; + struct usb_device *udev; int status; if (dev->power.power_state.event == PM_EVENT_ON) return 0; + /* mark things as "on" immediately, no matter what errors crop up */ + dev->power.power_state.event = PM_EVENT_ON; + /* devices resume through their hubs */ - if (dev->driver == &usb_generic_driver) + if (dev->driver == &usb_generic_driver) { + udev = to_usb_device(dev); + if (udev->state == USB_STATE_NOTATTACHED) + return 0; return usb_resume_device (to_usb_device(dev)); + } if ((dev->driver == NULL) || (dev->driver_data == &usb_generic_driver_data)) @@ -1487,11 +1492,14 @@ static int usb_generic_resume(struct device *dev) intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); + udev = interface_to_usbdev(intf); + if (udev->state == USB_STATE_NOTATTACHED) + return 0; + /* if driver was suspended, it has a resume method; * however, sysfs can wrongly mark things as suspended * (on the "no suspend method" FIXME path above) */ - mark_active(intf); if (driver->resume) { status = driver->resume(intf); if (status) { diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 3741a990403e..7add46ecc6a2 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -19,6 +19,7 @@ extern void usb_lock_all_devices(void); extern void usb_unlock_all_devices(void); extern void usb_kick_khubd(struct usb_device *dev); +extern void usb_suspend_root_hub(struct usb_device *hdev); extern void usb_resume_root_hub(struct usb_device *dev); extern int usb_hub_init(void); -- cgit v1.2.3 From f3f3253d644d36a2ea5464005a9c2cf28804d200 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:37:29 -0700 Subject: [PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-) --- drivers/usb/core/Kconfig | 11 ++-- drivers/usb/core/hub.c | 163 ++++++++++++++++++++++++++--------------------- 2 files changed, 97 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 1a9ff6184943..ff03184da403 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -61,14 +61,17 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB suspend/resume (EXPERIMENTAL)" + bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)" depends on USB && PM && EXPERIMENTAL help If you say Y here, you can use driver calls or the sysfs "power/state" file to suspend or resume individual USB - peripherals. There are many related features, such as - remote wakeup and driver-specific suspend processing, that - may not yet work as expected. + peripherals. + + Also, USB "remote wakeup" signaling is supported, whereby some + USB devices (like keyboards and network adapters) can wake up + their parent hub. That wakeup cascades up the USB tree, and + could wake the system from states like suspend-to-RAM. If you are unsure about this, say N here. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3c8d8d1f993c..6a601a4547e7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1612,7 +1612,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, */ static int __usb_suspend_device (struct usb_device *udev, int port1) { - int status; + int status = 0; /* caller owns the udev device lock */ if (port1 < 0) @@ -1638,21 +1638,10 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) } } - /* "global suspend" of the HC-to-USB interface (root hub), or - * "selective suspend" of just one hub-device link. + /* we only change a device's upstream USB link. + * root hubs have no upstream USB link. */ - if (!udev->parent) { - struct usb_bus *bus = udev->bus; - if (bus && bus->op->hub_suspend) { - status = bus->op->hub_suspend (bus); - if (status == 0) { - dev_dbg(&udev->dev, "usb suspend\n"); - usb_set_device_state(udev, - USB_STATE_SUSPENDED); - } - } else - status = -EOPNOTSUPP; - } else + if (udev->parent) status = hub_port_suspend(hdev_to_hub(udev->parent), port1, udev); @@ -1661,6 +1650,8 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) return status; } +#endif + /** * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use @@ -1683,6 +1674,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) */ int usb_suspend_device(struct usb_device *udev) { +#ifdef CONFIG_USB_SUSPEND int port1, status; port1 = locktree(udev); @@ -1692,8 +1684,14 @@ int usb_suspend_device(struct usb_device *udev) status = __usb_suspend_device(udev, port1); usb_unlock_device(udev); return status; +#else + /* NOTE: udev->state unchanged, it's not lying ... */ + udev->dev.power.power_state = PMSG_SUSPEND; + return 0; +#endif } + /* * If the USB "suspend" state is in use (rather than "global suspend"), * many devices will be individually taken out of suspend state using @@ -1702,13 +1700,13 @@ int usb_suspend_device(struct usb_device *udev) * resume (by host) or remote wakeup (by device) ... now see what changed * in the tree that's rooted at this device. */ -static int finish_port_resume(struct usb_device *udev) +static int finish_device_resume(struct usb_device *udev) { int status; u16 devstatus; /* caller owns the udev device lock */ - dev_dbg(&udev->dev, "usb resume\n"); + dev_dbg(&udev->dev, "finish resume\n"); /* usb ch9 identifies four variants of SUSPENDED, based on what * state the device resumes to. Linux currently won't see the @@ -1718,7 +1716,6 @@ static int finish_port_resume(struct usb_device *udev) usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED : USB_STATE_ADDRESS); - udev->dev.power.power_state = PMSG_ON; /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -1734,7 +1731,8 @@ static int finish_port_resume(struct usb_device *udev) int (*resume)(struct device *); le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP) + && udev->parent) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_CLEAR_FEATURE, @@ -1764,6 +1762,8 @@ static int finish_port_resume(struct usb_device *udev) return status; } +#ifdef CONFIG_USB_SUSPEND + static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { @@ -1809,7 +1809,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) /* TRSMRCY = 10 msec */ msleep(10); if (udev) - status = finish_port_resume(udev); + status = finish_device_resume(udev); } } if (status < 0) @@ -1818,7 +1818,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) return status; } -static int hub_resume (struct usb_interface *intf); +#endif /** * usb_resume_device - re-activate a suspended usb device @@ -1841,35 +1841,22 @@ int usb_resume_device(struct usb_device *udev) if (port1 < 0) return port1; - /* "global resume" of the HC-to-USB interface (root hub), or - * selective resume of one hub-to-device port - */ - if (!udev->parent) { - struct usb_bus *bus = udev->bus; - if (bus && bus->op->hub_resume) { - status = bus->op->hub_resume (bus); +#ifdef CONFIG_USB_SUSPEND + /* selective resume of one downstream hub-to-device port */ + if (udev->parent) { + if (udev->state == USB_STATE_SUSPENDED) { + // NOTE swsusp may bork us, device state being wrong... + // NOTE this fails if parent is also suspended... + status = hub_port_resume(hdev_to_hub(udev->parent), + port1, udev); } else - status = -EOPNOTSUPP; - if (status == 0) { - dev_dbg(&udev->dev, "usb resume\n"); - /* TRSMRCY = 10 msec */ - msleep(10); - usb_set_device_state (udev, USB_STATE_CONFIGURED); - udev->dev.power.power_state = PMSG_ON; - status = hub_resume (udev - ->actconfig->interface[0]); - } - } else if (udev->state == USB_STATE_SUSPENDED) { - // NOTE this fails if parent is also suspended... - status = hub_port_resume(hdev_to_hub(udev->parent), - port1, udev); - } else { - status = 0; - } - if (status < 0) { + status = 0; + } else +#endif + status = finish_device_resume(udev); + if (status < 0) dev_dbg(&udev->dev, "can't resume, status %d\n", status); - } usb_unlock_device(udev); @@ -1886,6 +1873,8 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; +#ifdef CONFIG_USB_SUSPEND + /* don't repeat RESUME sequence if this device * was already woken up by some other task */ @@ -1894,9 +1883,10 @@ static int remote_wakeup(struct usb_device *udev) dev_dbg(&udev->dev, "RESUME (wakeup)\n"); /* TRSMRCY = 10 msec */ msleep(10); - status = finish_port_resume(udev); + status = finish_device_resume(udev); } up(&udev->serialize); +#endif return status; } @@ -1911,12 +1901,32 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *udev; udev = hdev->children [port1-1]; - if (udev && udev->state != USB_STATE_SUSPENDED) { + if (udev && (udev->dev.power.power_state.event + == PM_EVENT_ON +#ifdef CONFIG_USB_SUSPEND + || udev->state != USB_STATE_SUSPENDED +#endif + )) { dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); return -EBUSY; } } + /* "global suspend" of the downstream HC-to-USB interface */ + if (!hdev->parent) { + struct usb_bus *bus = hdev->bus; + if (bus && bus->op->hub_suspend) { + int status = bus->op->hub_suspend (bus); + + if (status != 0) { + dev_dbg(&hdev->dev, "'global' suspend %d\n", + status); + return status; + } + } else + return -EOPNOTSUPP; + } + /* stop khubd and related activity */ hub_quiesce(hub); return 0; @@ -1926,9 +1936,36 @@ static int hub_resume(struct usb_interface *intf) { struct usb_device *hdev = interface_to_usbdev(intf); struct usb_hub *hub = usb_get_intfdata (intf); - unsigned port1; int status; + /* "global resume" of the downstream HC-to-USB interface */ + if (!hdev->parent) { + struct usb_bus *bus = hdev->bus; + if (bus && bus->op->hub_resume) { + status = bus->op->hub_resume (bus); + if (status) { + dev_dbg(&intf->dev, "'global' resume %d\n", + status); + return status; + } + } else + return -EOPNOTSUPP; + if (status == 0) { + /* TRSMRCY = 10 msec */ + msleep(10); + } + } + + hub_activate(hub); + + /* REVISIT: this recursion probably shouldn't exist. Remove + * this code sometime, after retesting with different root and + * external hubs. + */ +#ifdef CONFIG_USB_SUSPEND + { + unsigned port1; + for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; u16 portstat, portchange; @@ -1953,7 +1990,7 @@ static int hub_resume(struct usb_interface *intf) if (portstat & USB_PORT_STAT_SUSPEND) status = hub_port_resume(hub, port1, udev); else { - status = finish_port_resume(udev); + status = finish_device_resume(udev); if (status < 0) { dev_dbg(&intf->dev, "resume port %d --> %d\n", port1, status); @@ -1962,8 +1999,8 @@ static int hub_resume(struct usb_interface *intf) } up(&udev->serialize); } - hub->resume_root_hub = 0; - hub_activate(hub); + } +#endif return 0; } @@ -1987,26 +2024,6 @@ void usb_resume_root_hub(struct usb_device *hdev) kick_khubd(hub); } -#else /* !CONFIG_USB_SUSPEND */ - -int usb_suspend_device(struct usb_device *udev) -{ - /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */ - return 0; -} - -int usb_resume_device(struct usb_device *udev) -{ - udev->dev.power.power_state.event = PM_EVENT_ON; - return 0; -} - -#define hub_suspend NULL -#define hub_resume NULL -#define remote_wakeup(x) 0 - -#endif /* CONFIG_USB_SUSPEND */ - EXPORT_SYMBOL(usb_suspend_device); EXPORT_SYMBOL(usb_resume_device); -- cgit v1.2.3 From 5f827ea3c3820cd8e0a1a35e4d275c8b78ee94e1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:38:16 -0700 Subject: [PATCH] usbcore PCI glue updates for PM This updates the PCI glue to address the new and simplified usbcore suspend semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because hcd->hub_suspend() will always be called. - Removes now-unneeded recursion support - Go back to ignoring faults reported by the wakeup calls; we expect them to fail sometimes, and that's just fine. The PCI HCDs will need simple changes to catch up to this, like being able to ignore the setting of CONFIG_USB_SUSPEND. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +- 2 files changed, 53 insertions(+), 59 deletions(-) --- drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +-- 2 files changed, 53 insertions(+), 59 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 6385d1a99b60..84d9e69329bb 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -30,6 +30,8 @@ #include #include #include + +#include "usb.h" #include "hcd.h" @@ -197,6 +199,26 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) hcd = pci_get_drvdata(dev); + /* Root hub suspend should have stopped all downstream traffic, + * and all bus master traffic. And done so for both the interface + * and the stub usb_device (which we check here). But maybe it + * didn't; writing sysfs power/state files ignores such rules... + * + * We must ignore the FREEZE vs SUSPEND distinction here, because + * otherwise the swsusp will save (and restore) garbage state. + */ + if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON) + return -EBUSY; + + if (hcd->driver->suspend) { + retval = hcd->driver->suspend(hcd, message); + if (retval) { + dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n", + retval); + goto done; + } + } + /* FIXME until the generic PM interfaces change a lot more, this * can't use PCI D1 and D2 states. For example, the confusion * between messages and states will need to vanish, and messages @@ -215,31 +237,13 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) */ has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - switch (hcd->state) { - - /* entry if root hub wasn't yet suspended ... from sysfs, - * without autosuspend, or if USB_SUSPEND isn't configured. + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. */ - case HC_STATE_RUNNING: - hcd->state = HC_STATE_QUIESCING; - retval = hcd->driver->suspend (hcd, message); - if (retval) { - dev_dbg (hcd->self.controller, - "suspend fail, retval %d\n", - retval); - break; - } - hcd->state = HC_STATE_SUSPENDED; - /* FALLTHROUGH */ + if (hcd->state == HC_STATE_SUSPENDED) { - /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the - * controller and/or root hub will already have been suspended, - * but it won't be ready for a PCI resume call. - * - * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will - * have been called, otherwise root hub timers still run ... - */ - case HC_STATE_SUSPENDED: /* no DMA or IRQs except when HC is active */ if (dev->current_state == PCI_D0) { pci_save_state (dev); @@ -248,7 +252,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) if (!has_pci_pm) { dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n"); - break; + goto done; } /* NOTE: dev->current_state becomes nonzero only here, and @@ -259,28 +263,29 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) retval = pci_set_power_state (dev, PCI_D3hot); if (retval == 0) { dev_dbg (hcd->self.controller, "--> PCI D3\n"); - retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); - if (retval) - break; - retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); - } else if (retval < 0) { + + /* Ignore these return values. We rely on pci code to + * reject requests the hardware can't implement, rather + * than coding the same thing. + */ + (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); + (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); + } else { dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n", retval); (void) usb_hcd_pci_resume (dev); - break; } - break; - default: + + } else { dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n", hcd->state); WARN_ON(1); retval = -EINVAL; - break; } - /* update power_state **ONLY** to make sysfs happier */ +done: if (retval == 0) - dev->dev.power.power_state = message; + dev->dev.power.power_state = PMSG_SUSPEND; return retval; } EXPORT_SYMBOL (usb_hcd_pci_suspend); @@ -336,20 +341,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->current_state); } #endif - retval = pci_enable_wake (dev, dev->current_state, 0); - if (retval) { - dev_err(hcd->self.controller, - "can't enable_wake to %d, %d!\n", - dev->current_state, retval); - return retval; - } - retval = pci_enable_wake (dev, PCI_D3cold, 0); - if (retval) { - dev_err(hcd->self.controller, - "can't enable_wake to %d, %d!\n", - PCI_D3cold, retval); - return retval; - } + /* yes, ignore these results too... */ + (void) pci_enable_wake (dev, dev->current_state, 0); + (void) pci_enable_wake (dev, PCI_D3cold, 0); } else { /* Same basic cases: clean (powered/not), dirty */ dev_dbg(hcd->self.controller, "PCI legacy resume\n"); @@ -371,17 +365,17 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->dev.power.power_state = PMSG_ON; - hcd->state = HC_STATE_RESUMING; hcd->saw_irq = 0; - retval = hcd->driver->resume (hcd); - if (!HC_IS_RUNNING (hcd->state)) { - dev_dbg (hcd->self.controller, - "resume fail, retval %d\n", retval); - usb_hc_died (hcd); + if (hcd->driver->resume) { + retval = hcd->driver->resume(hcd); + if (retval) { + dev_err (hcd->self.controller, + "PCI post-resume error %d!\n", retval); + usb_hc_died (hcd); + } } - retval = pci_enable_device(dev); return retval; } EXPORT_SYMBOL (usb_hcd_pci_resume); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index eb21f13c5c74..74757fc1a99f 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -182,12 +182,12 @@ struct hc_driver { int (*start) (struct usb_hcd *hcd); /* NOTE: these suspend/resume calls relate to the HC as - * a whole, not just the root hub; they're for bus glue. + * a whole, not just the root hub; they're for PCI bus glue. */ - /* called after all devices were suspended */ + /* called after suspending the hub, before entering D3 etc */ int (*suspend) (struct usb_hcd *hcd, pm_message_t message); - /* called before any devices get resumed */ + /* called after entering D0 (etc), before resuming the hub */ int (*resume) (struct usb_hcd *hcd); /* cleanly make HCD stop writing memory and doing I/O */ -- cgit v1.2.3 From f197b2c54b9d9a133a9a8ff92f35cadf8945ea14 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:42:53 -0700 Subject: [PATCH] OHCI PM updates This simplifies the OHCI root hub suspend logic: - Uses new usbcore root hub calls to make autosuspend work again: * Uses a newish usbcore root hub wakeup mechanism, making requests to khubd not keventd. * Uses an even newer sibling suspend hook. - Expect someone always made usbcore call ohci_hub_suspend() before bus glue fires; and that ohci_hub_resume() is only called after that bus glue ran. Previously, only CONFIG_USB_SUSPEND promised those things. (Includes updates to PCI and OMAP bus glue.) - Handle a not-noticed-before special case during resume from one of the swsusp snapshots when using "usb-handoff": the controller isn't left in RESET state. (A bug to fix in the usb-handoff code...) Also cleans up a minor debug printk glitch, and switches an mdelay over to an msleep (how did that stick around for so long?). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ohci-dbg.c | 4 ---- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 42 ++++++++++++------------------------------ drivers/usb/host/ohci-mem.c | 1 - drivers/usb/host/ohci-omap.c | 36 ++++++++++++------------------------ drivers/usb/host/ohci-pci.c | 40 ++++++++-------------------------------- drivers/usb/host/ohci.h | 1 - 7 files changed, 33 insertions(+), 93 deletions(-) --- drivers/usb/host/ohci-dbg.c | 4 ---- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 42 ++++++++++++------------------------------ drivers/usb/host/ohci-mem.c | 1 - drivers/usb/host/ohci-omap.c | 38 +++++++++++++------------------------- drivers/usb/host/ohci-pci.c | 40 ++++++++-------------------------------- drivers/usb/host/ohci.h | 1 - 7 files changed, 34 insertions(+), 94 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 7924c74f958e..7bfffcbbd226 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -193,10 +193,6 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size) maybe_print_eds (controller, "donehead", ohci_readl (controller, ®s->donehead), next, size); - - /* broken fminterval means traffic won't flow! */ - ohci_dbg (controller, "fminterval %08x\n", - ohci_readl (controller, ®s->fminterval)); } #define dbg_port_sw(hc,num,value,next,size) \ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index c26ab5f2a403..5c0c6c8a7a82 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -723,7 +723,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) ohci_vdbg (ohci, "resume detect\n"); ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus); if (hcd->state != HC_STATE_QUIESCING) - schedule_work(&ohci->rh_resume); + usb_hcd_resume_root_hub(hcd); } if (ints & OHCI_INTR_WDH) { diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index b96948ea3005..39a60e731ec2 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -73,7 +73,6 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) ohci_dbg (ohci, "suspend root hub\n"); /* First stop any processing */ - hcd->state = HC_STATE_QUIESCING; if (ohci->hc_control & OHCI_SCHED_ENABLES) { int limit; @@ -108,7 +107,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) else ohci->hc_control &= ~OHCI_CTRL_RWE; - /* Suspend hub */ + /* Suspend hub ... this is the "global (to this bus) suspend" mode, + * which doesn't imply ports will first be individually suspended. + */ ohci->hc_control &= ~OHCI_CTRL_HCFS; ohci->hc_control |= OHCI_USB_SUSPEND; ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); @@ -118,8 +119,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) ohci->next_statechange = jiffies + msecs_to_jiffies (5); done: + /* external suspend vs self autosuspend ... same effect */ if (status == 0) - hcd->state = HC_STATE_SUSPENDED; + usb_hcd_suspend_root_hub(hcd); spin_unlock_irqrestore (&ohci->lock, flags); return status; } @@ -146,7 +148,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { - /* this can happen after suspend-to-disk */ + /* this can happen after resuming a swsusp snapshot */ if (hcd->state == HC_STATE_RESUMING) { ohci_dbg (ohci, "BIOS/SMM active, control %03x\n", ohci->hc_control); @@ -169,11 +171,12 @@ static int ohci_hub_resume (struct usb_hcd *hcd) ohci_info (ohci, "wakeup\n"); break; case OHCI_USB_OPER: - ohci_dbg (ohci, "already resumed\n"); - status = 0; + /* this can happen after resuming a swsusp snapshot */ + ohci_dbg (ohci, "snapshot resume? reinit\n"); + status = -EBUSY; break; default: /* RESET, we lost power */ - ohci_dbg (ohci, "root hub hardware reset\n"); + ohci_dbg (ohci, "lost power\n"); status = -EBUSY; } spin_unlock_irq (&ohci->lock); @@ -198,8 +201,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) } /* Some controllers (lucent erratum) need extra-long delays */ - hcd->state = HC_STATE_RESUMING; - mdelay (20 /* usb 11.5.1.10 */ + 15); + msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); temp = ohci_readl (ohci, &ohci->regs->control); temp &= OHCI_CTRL_HCFS; @@ -273,27 +275,9 @@ static int ohci_hub_resume (struct usb_hcd *hcd) (void) ohci_readl (ohci, &ohci->regs->control); } - hcd->state = HC_STATE_RUNNING; return 0; } -static void ohci_rh_resume (void *_hcd) -{ - struct usb_hcd *hcd = _hcd; - - usb_lock_device (hcd->self.root_hub); - (void) ohci_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -} - -#else - -static void ohci_rh_resume (void *_hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (_hcd); - ohci_dbg(ohci, "rh_resume ??\n"); -} - #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -367,7 +351,6 @@ done: #ifdef CONFIG_PM /* save power by suspending idle root hubs; * INTR_RD wakes us when there's work - * NOTE: if we can do this, we don't need a root hub timer! */ if (can_suspend && !changed @@ -380,7 +363,6 @@ done: ) { ohci_vdbg (ohci, "autosuspend\n"); (void) ohci_hub_suspend (hcd); - hcd->state = HC_STATE_RUNNING; usb_unlock_device (hcd->self.root_hub); } #endif @@ -554,7 +536,7 @@ static int ohci_hub_control ( temp = RH_PS_POCI; if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER) - schedule_work (&ohci->rh_resume); + usb_hcd_resume_root_hub(hcd); break; case USB_PORT_FEAT_C_SUSPEND: temp = RH_PS_PSSC; diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index 9fb83dfb1eb4..bfbe328a4788 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci) ohci->next_statechange = jiffies; spin_lock_init (&ohci->lock); INIT_LIST_HEAD (&ohci->pending); - INIT_WORK (&ohci->rh_resume, ohci_rh_resume, ohci_to_hcd(ohci)); ohci->reboot_notifier.notifier_call = ohci_reboot; } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index e67c07dc426d..b3498b9b965f 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -458,41 +458,29 @@ static int ohci_hcd_omap_drv_remove(struct device *dev) static int ohci_omap_suspend(struct device *dev, pm_message_t message) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); - int status = -EINVAL; - - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); - status = ohci_hub_suspend(ohci_to_hcd(ohci)); - if (status == 0) { - omap_ohci_clock_power(0); - ohci_to_hcd(ohci)->self.root_hub->state = - USB_STATE_SUSPENDED; - ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; - dev->power.power_state = PMSG_SUSPEND; - } - up(&ohci_to_hcd(ohci)->self.root_hub->serialize); - return status; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + omap_ohci_clock_power(0); + ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; + dev->power.power_state = PMSG_SUSPEND; + return 0; } static int ohci_omap_resume(struct device *dev) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); - int status = 0; if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; + omap_ohci_clock_power(1); -#ifdef CONFIG_USB_SUSPEND - /* get extra cleanup even if remote wakeup isn't in use */ - status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub); -#else - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); - status = ohci_hub_resume(ohci_to_hcd(ohci)); - up(&ohci_to_hcd(ohci)->self.root_hub->serialize); -#endif - if (status == 0) - dev->power.power_state = PMSG_ON; - return status; + dev->power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(dev_get_drvdata(dev)); + return 0; } #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 0afa237b02ad..99a0ad41aec5 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -112,23 +112,13 @@ ohci_pci_start (struct usb_hcd *hcd) static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - - /* suspend root hub, hoping it keeps power during suspend */ - if (time_before (jiffies, ohci->next_statechange)) - msleep (100); - -#ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - (void) ohci_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif + /* root hub was already suspended */ - /* let things settle down a bit */ - msleep (100); - + /* FIXME these PMAC things get called in the wrong places. ASIC + * clocks should be turned off AFTER entering D3, and on BEFORE + * trying to enter D0. Evidently the PCI layer doesn't currently + * provide the right sort of platform hooks for this ... + */ #ifdef CONFIG_PPC_PMAC if (_machine == _MACH_Pmac) { struct device_node *of_node; @@ -145,9 +135,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) static int ohci_pci_resume (struct usb_hcd *hcd) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int retval = 0; - #ifdef CONFIG_PPC_PMAC if (_machine == _MACH_Pmac) { struct device_node *of_node; @@ -159,19 +146,8 @@ static int ohci_pci_resume (struct usb_hcd *hcd) } #endif /* CONFIG_PPC_PMAC */ - /* resume root hub */ - if (time_before (jiffies, ohci->next_statechange)) - msleep (100); -#ifdef CONFIG_USB_SUSPEND - /* get extra cleanup even if remote wakeup isn't in use */ - retval = usb_resume_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - retval = ohci_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - - return retval; + usb_hcd_resume_root_hub(hcd); + return 0; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 8a9b9d9209e9..caacf14371f5 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -389,7 +389,6 @@ struct ohci_hcd { unsigned long next_statechange; /* suspend/resume */ u32 fminterval; /* saved register */ - struct work_struct rh_resume; struct notifier_block reboot_notifier; unsigned long flags; /* for HC bugs */ -- cgit v1.2.3 From f2cb36c1df427431a8c6096b4ad113df767c1bd9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:43:30 -0700 Subject: [PATCH] update PCI early-handoff handling for OHCI The PCI "early usb handoff" quirk logic didn't work like "ohci-hcd" ... This patch makes it do so by: - Resetting the controller after kicking BIOS off, matching the normal "chip in hardware reset" startup mode; - Reporting any BIOS that borks this simple handoff; it's likely got a few other surprises for us too. - Ignoring that handoff on HPPA; The diagnostic string is mostly shared with EHCI, saving a few bytes. Signed-off-by: Greg Kroah-Hartman drivers/usb/host/pci-quirks.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) --- drivers/usb/host/pci-quirks.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 8ee5c3ed4cd6..49f7381a6fd3 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -60,6 +60,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ #define OHCI_INTR_OC (1 << 30) /* ownership change */ @@ -140,13 +141,17 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; int wait_time; + u32 control; base = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); if (base == NULL) return; - if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { - wait_time = 500; /* 0.5 seconds */ +/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ +#ifndef __hppa__ + control = readl(base + OHCI_CONTROL); + if (control & OHCI_CTRL_IR) { + wait_time = 500; /* arbitrary; 5 seconds */ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); writel(OHCI_OCR, base + OHCI_CMDSTATUS); while (wait_time > 0 && @@ -154,7 +159,15 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) wait_time -= 10; msleep(10); } + if (wait_time <= 0) + printk(KERN_WARNING "%s %s: early BIOS handoff " + "failed (BIOS bug ?)\n", + pdev->dev.bus_id, "OHCI"); + + /* reset controller, preserving RWC */ + writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL); } +#endif /* * disable interrupts @@ -211,8 +224,9 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) /* * well, possibly buggy BIOS... */ - printk(KERN_WARNING "EHCI early BIOS handoff " - "failed (BIOS bug ?)\n"); + printk(KERN_WARNING "%s %s: early BIOS handoff " + "failed (BIOS bug ?)\n", + pdev->dev.bus_id, "EHCI"); pci_write_config_dword(pdev, hcc_params + EHCI_USBLEGSUP, EHCI_USBLEGSUP_OS); -- cgit v1.2.3 From a7f72abe8fac9b919135005e06216be8eef945a2 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:44:56 -0700 Subject: [PATCH] UHCI PM updates This removes suspend and resume path recursion in UHCI. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/uhci-hcd.c | 9 --------- 1 file changed, 9 deletions(-) --- drivers/usb/host/uhci-hcd.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index b44094fcd779..34c9dbc6a156 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -762,11 +762,6 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) if (uhci->hc_inaccessible) /* Dead or already suspended */ goto done; -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - suspend_rh(uhci, UHCI_RH_SUSPENDED); -#endif - if (uhci->rh_state > UHCI_RH_SUSPENDED) { dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); hcd->state = HC_STATE_RUNNING; @@ -808,10 +803,6 @@ static int uhci_resume(struct usb_hcd *hcd) check_and_reset_hc(uhci); configure_hc(uhci); -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - wakeup_rh(uhci); -#endif if (uhci->rh_state == UHCI_RH_RESET) suspend_rh(uhci, UHCI_RH_SUSPENDED); -- cgit v1.2.3 From ccdcf77ae32e3d3347fdf3810b27f899e98c34fb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:45:13 -0700 Subject: [PATCH] ISP116x PM updates This makes the isp116x driver stop using usb_suspend_device() and usb_resume_device() ... usbcore now calls to the root hub methods, removing the need for this. It also switches from keventd to khubd for remote wakeup. (Compile tested.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/isp116x-hcd.c | 29 ++++------------------------- drivers/usb/host/isp116x.h | 1 - 2 files changed, 4 insertions(+), 26 deletions(-) --- drivers/usb/host/isp116x-hcd.c | 29 ++++------------------------- drivers/usb/host/isp116x.h | 1 - 2 files changed, 4 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 554d60282a9d..f68220fc53fd 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -638,7 +638,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) + msecs_to_jiffies(20) + 1); if (intstat & HCINT_RD) { DBG("---- remote wakeup\n"); - schedule_work(&isp116x->rh_resume); + usb_hcd_resume_root_hub(hcd); ret = IRQ_HANDLED; } irqstat &= ~HCuPINT_OPR; @@ -1263,22 +1263,12 @@ static int isp116x_hub_resume(struct usb_hcd *hcd) return 0; } -static void isp116x_rh_resume(void *_hcd) -{ - struct usb_hcd *hcd = _hcd; - - usb_resume_device(hcd->self.root_hub); -} #else #define isp116x_hub_suspend NULL #define isp116x_hub_resume NULL -static void isp116x_rh_resume(void *_hcd) -{ -} - #endif /*-----------------------------------------------------------------*/ @@ -1732,7 +1722,6 @@ static int __init isp116x_probe(struct device *dev) isp116x->addr_reg = addr_reg; spin_lock_init(&isp116x->lock); INIT_LIST_HEAD(&isp116x->async); - INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd); isp116x->board = dev->platform_data; if (!isp116x->board) { @@ -1777,16 +1766,10 @@ static int __init isp116x_probe(struct device *dev) static int isp116x_suspend(struct device *dev, pm_message_t state) { int ret = 0; - struct usb_hcd *hcd = dev_get_drvdata(dev); VDBG("%s: state %x\n", __func__, state); - ret = usb_suspend_device(hcd->self.root_hub); - if (!ret) { - dev->power.power_state = state; - INFO("%s suspended\n", hcd_name); - } else - ERR("%s suspend failed\n", hcd_name); + dev->power.power_state = state; return ret; } @@ -1797,15 +1780,11 @@ static int isp116x_suspend(struct device *dev, pm_message_t state) static int isp116x_resume(struct device *dev) { int ret = 0; - struct usb_hcd *hcd = dev_get_drvdata(dev); VDBG("%s: state %x\n", __func__, dev->power.power_state); - ret = usb_resume_device(hcd->self.root_hub); - if (!ret) { - dev->power.power_state = PMSG_ON; - VDBG("%s resumed\n", (char *)hcd_name); - } + dev->power.power_state = PMSG_ON; + return ret; } diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index 58873470dcf5..c6fec96785fe 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -253,7 +253,6 @@ static const int cc_to_error[16] = { struct isp116x { spinlock_t lock; - struct work_struct rh_resume; void __iomem *addr_reg; void __iomem *data_reg; -- cgit v1.2.3 From 5edbfb7c8af0577097dae87cdd4dfdba82bb9579 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:45:26 -0700 Subject: [PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-) --- drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a601a4547e7..15db5e490aa2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1652,10 +1652,10 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) #endif -/** +/* * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use - * Context: must be able to sleep; device not locked + * Context: must be able to sleep; device not locked; pm locks held * * Suspends a USB device that isn't in active use, conserving power. * Devices may wake out of a suspend, if anything important happens, @@ -1820,10 +1820,10 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) #endif -/** +/* * usb_resume_device - re-activate a suspended usb device * @udev: device to re-activate - * Context: must be able to sleep; device not locked + * Context: must be able to sleep; device not locked; pm locks held * * This will re-activate the suspended device, increasing power usage * while letting drivers communicate again with its endpoints. @@ -2024,10 +2024,6 @@ void usb_resume_root_hub(struct usb_device *hdev) kick_khubd(hub); } -EXPORT_SYMBOL(usb_suspend_device); -EXPORT_SYMBOL(usb_resume_device); - - /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 7add46ecc6a2..4d59f6e07999 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -29,6 +29,10 @@ extern void usb_major_cleanup(void); extern int usb_host_init(void); extern void usb_host_cleanup(void); +extern int usb_suspend_device(struct usb_device *dev); +extern int usb_resume_device(struct usb_device *dev); + + /* Interfaces and their "power state" are owned by usbcore */ static inline void mark_active(struct usb_interface *f) diff --git a/include/linux/usb.h b/include/linux/usb.h index 25ec91ddcd04..207b1ad9d990 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -975,11 +975,6 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout); -/* selective suspend/resume */ -extern int usb_suspend_device(struct usb_device *dev); -extern int usb_resume_device(struct usb_device *dev); - - /* wrappers around usb_control_msg() for the most common standard requests */ extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, unsigned char descindex, void *buf, int size); -- cgit v1.2.3 From b13296c6617f22e8c0174a7af32780617db0e680 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 27 Sep 2005 10:38:54 -0700 Subject: [PATCH] updates for "controller suspended" handling Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-) --- drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index de59bb515315..b7bb8dd1894a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -458,22 +458,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) default: /* non-generic request */ - if (HC_IS_SUSPENDED (hcd->state)) - status = -EAGAIN; - else { - switch (typeReq) { - case GetHubStatus: - case GetPortStatus: - len = 4; - break; - case GetHubDescriptor: - len = sizeof (struct usb_hub_descriptor); - break; - } - status = hcd->driver->hub_control (hcd, - typeReq, wValue, wIndex, - tbuf, wLength); + switch (typeReq) { + case GetHubStatus: + case GetPortStatus: + len = 4; + break; + case GetHubDescriptor: + len = sizeof (struct usb_hub_descriptor); + break; } + status = hcd->driver->hub_control (hcd, + typeReq, wValue, wIndex, + tbuf, wLength); break; error: /* "protocol stall" on error */ @@ -487,7 +483,7 @@ error: "CTRL: TypeReq=0x%x val=0x%x " "idx=0x%x len=%d ==> %d\n", typeReq, wValue, wIndex, - wLength, urb->status); + wLength, status); } } if (len) { diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index b32898e0a27d..f2a1fed2a802 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -237,7 +237,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) (dev->state < USB_STATE_DEFAULT) || (!dev->bus) || (dev->devnum <= 0)) return -ENODEV; - if (dev->state == USB_STATE_SUSPENDED) + if (dev->bus->controller->power.power_state.event != PM_EVENT_ON + || dev->state == USB_STATE_SUSPENDED) return -EHOSTUNREACH; if (!(op = dev->bus->op) || !op->submit_urb) return -ENODEV; -- cgit v1.2.3 From d09d36a91c70cb3cc609d693bf6a7e7a266ff9e6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 26 Sep 2005 16:22:45 -0400 Subject: [PATCH] USB: usb_bulk_message() handles interrupts endpoints Because there is no bulk_interrupt_message() routine and no USBDEVFS_INTERRUPT ioctl, people have been forced to abuse the usb_bulk_message() routine and USBDEVFS_BULK by using them for interrupt transfers as well as bulk transfers. This patch (as567) formalizes this practice and adds code to usb_bulk_message() for detecting when the target is really an interrupt endpoint. If it is, the routine submits an interrupt URB (using the default interval) instead of a bulk URB. In theory this should help HCDs that don't like it when people try to mix transfer types, queuing both periodic and non-periodic types for the same endpoint. Not fully tested -- I don't have any programs that use USBDEVFS_BULK for interrupt transfers -- but it compiles okay and normal bulk messages work as well as before. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman drivers/usb/core/message.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) --- drivers/usb/core/message.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index ebf59ea99263..574d0d4b3401 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -187,21 +187,37 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u * If a thread in your driver uses this call, make sure your disconnect() * method can wait for it to complete. Since you don't have a handle on * the URB used, you can't cancel the request. + * + * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT + * ioctl, users are forced to abuse this routine by using it to submit + * URBs for interrupt endpoints. We will take the liberty of creating + * an interrupt URB (with the default interval) if the target is an + * interrupt endpoint. */ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) { struct urb *urb; + struct usb_host_endpoint *ep; - if (len < 0) + ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out) + [usb_pipeendpoint(pipe)]; + if (!ep || len < 0) return -EINVAL; - urb=usb_alloc_urb(0, GFP_KERNEL); + urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return -ENOMEM; - usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, - usb_api_blocking_completion, NULL); + if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT) { + pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); + usb_fill_int_urb(urb, usb_dev, pipe, data, len, + usb_api_blocking_completion, NULL, + ep->desc.bInterval); + } else + usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, + usb_api_blocking_completion, NULL); return usb_start_wait_urb(urb, timeout, actual_length); } -- cgit v1.2.3 From 8b262bd25580e165710e8a27df19cd60c2ef58a3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 26 Sep 2005 16:31:15 -0400 Subject: [PATCH] USB: UHCI: Spruce up some comments This patch (as570) changes some comments in the uhci-hcd header file and removes an unused declaration (something I forgot to erase in an earlier patch). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman drivers/usb/host/uhci-hcd.h | 91 +++++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 42 deletions(-) --- drivers/usb/host/uhci-hcd.h | 91 ++++++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index b04d99df0a0e..e576db57a926 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -7,6 +7,7 @@ #define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT) #define PIPE_DEVEP_MASK 0x0007ff00 + /* * Universal Host Controller Interface data structures and defines */ @@ -82,15 +83,10 @@ #define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ #define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */ -struct uhci_frame_list { - __le32 frame[UHCI_NUMFRAMES]; - - void *frame_cpu[UHCI_NUMFRAMES]; - dma_addr_t dma_handle; -}; - -struct urb_priv; +/* + * Queue Headers + */ /* * One role of a QH is to hold a queue of TDs for some endpoint. Each QH is @@ -116,13 +112,13 @@ struct uhci_qh { struct urb_priv *urbp; - struct list_head list; /* P: uhci->frame_list_lock */ - struct list_head remove_list; /* P: uhci->remove_list_lock */ + struct list_head list; + struct list_head remove_list; } __attribute__((aligned(16))); /* * We need a special accessor for the element pointer because it is - * subject to asynchronous updates by the controller + * subject to asynchronous updates by the controller. */ static __le32 inline qh_element(struct uhci_qh *qh) { __le32 element = qh->element; @@ -131,6 +127,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) { return element; } + +/* + * Transfer Descriptors + */ + /* * for TD : */ @@ -183,17 +184,10 @@ static __le32 inline qh_element(struct uhci_qh *qh) { * * That's silly, the hardware doesn't care. The hardware only cares that * the hardware words are 16-byte aligned, and we can have any amount of - * sw space after the TD entry as far as I can tell. - * - * But let's just go with the documentation, at least for 32-bit machines. - * On 64-bit machines we probably want to take advantage of the fact that - * hw doesn't really care about the size of the sw-only area. - * - * Alas, not anymore, we have more than 4 words for software, woops. - * Everything still works tho, surprise! -jerdfelt + * sw space after the TD entry. * * td->link points to either another TD (not necessarily for the same urb or - * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs) + * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs). */ struct uhci_td { /* Hardware fields */ @@ -205,16 +199,16 @@ struct uhci_td { /* Software fields */ dma_addr_t dma_handle; - struct list_head list; /* P: urb->lock */ - struct list_head remove_list; /* P: uhci->td_remove_list_lock */ + struct list_head list; + struct list_head remove_list; int frame; /* for iso: what frame? */ - struct list_head fl_list; /* P: uhci->frame_list_lock */ + struct list_head fl_list; } __attribute__((aligned(16))); /* * We need a special accessor for the control/status word because it is - * subject to asynchronous updates by the controller + * subject to asynchronous updates by the controller. */ static u32 inline td_status(struct uhci_td *td) { __le32 status = td->status; @@ -224,6 +218,10 @@ static u32 inline td_status(struct uhci_td *td) { } +/* + * Skeleton Queue Headers + */ + /* * The UHCI driver places Interrupt, Control and Bulk into QH's both * to group together TD's for one transfer, and also to faciliate queuing @@ -254,15 +252,15 @@ static u32 inline td_status(struct uhci_td *td) { * * The terminating QH is used for 2 reasons: * - To place a terminating TD which is used to workaround a PIIX bug - * (see Intel errata for explanation) + * (see Intel errata for explanation), and * - To loop back to the full-speed control queue for full-speed bandwidth - * reclamation + * reclamation. * * Isochronous transfers are stored before the start of the skeleton * schedule and don't use QH's. While the UHCI spec doesn't forbid the - * use of QH's for Isochronous, it doesn't use them either. Since we don't - * need to use them either, we follow the spec diagrams in hope that it'll - * be more compatible with future UHCI implementations. + * use of QH's for Isochronous, it doesn't use them either. And the spec + * says that queues never advance on an error completion status, which + * makes them totally unsuitable for Isochronous transfers. */ #define UHCI_NUM_SKELQH 12 @@ -312,8 +310,13 @@ static inline int __interval_to_skel(int interval) return 0; /* int128 for 128-255 ms (Max.) */ } + +/* + * The UHCI controller and root hub + */ + /* - * States for the root hub. + * States for the root hub: * * To prevent "bouncing" in the presence of electrical noise, * when there are no devices attached we delay for 1 second in the @@ -324,7 +327,7 @@ static inline int __interval_to_skel(int interval) */ enum uhci_rh_state { /* In the following states the HC must be halted. - * These two must come first */ + * These two must come first. */ UHCI_RH_RESET, UHCI_RH_SUSPENDED, @@ -336,13 +339,13 @@ enum uhci_rh_state { UHCI_RH_SUSPENDING, /* In the following states it's an error if the HC is halted. - * These two must come last */ + * These two must come last. */ UHCI_RH_RUNNING, /* The normal state */ UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */ }; /* - * This describes the full uhci information. + * The full UHCI controller information: */ struct uhci_hcd { @@ -361,7 +364,7 @@ struct uhci_hcd { spinlock_t lock; dma_addr_t frame_dma_handle; /* Hardware frame list */ - __le32 *frame; /* P: uhci->lock */ + __le32 *frame; void **frame_cpu; /* CPU's frame list */ int fsbr; /* Full-speed bandwidth reclamation */ @@ -387,22 +390,22 @@ struct uhci_hcd { unsigned long ports_timeout; /* Time to stop signalling */ /* Main list of URB's currently controlled by this HC */ - struct list_head urb_list; /* P: uhci->lock */ + struct list_head urb_list; /* List of QH's that are done, but waiting to be unlinked (race) */ - struct list_head qh_remove_list; /* P: uhci->lock */ + struct list_head qh_remove_list; unsigned int qh_remove_age; /* Age in frames */ /* List of TD's that are done, but waiting to be freed (race) */ - struct list_head td_remove_list; /* P: uhci->lock */ + struct list_head td_remove_list; unsigned int td_remove_age; /* Age in frames */ /* List of asynchronously unlinked URB's */ - struct list_head urb_remove_list; /* P: uhci->lock */ + struct list_head urb_remove_list; unsigned int urb_remove_age; /* Age in frames */ /* List of URB's awaiting completion callback */ - struct list_head complete_list; /* P: uhci->lock */ + struct list_head complete_list; int rh_numports; /* Number of root-hub ports */ @@ -421,13 +424,17 @@ static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci) #define uhci_dev(u) (uhci_to_hcd(u)->self.controller) + +/* + * Private per-URB data + */ struct urb_priv { struct list_head urb_list; struct urb *urb; struct uhci_qh *qh; /* QH for this URB */ - struct list_head td_list; /* P: urb->lock */ + struct list_head td_list; unsigned fsbr : 1; /* URB turned on FSBR */ unsigned fsbr_timeout : 1; /* URB timed out on FSBR */ @@ -438,9 +445,10 @@ struct urb_priv { unsigned long fsbrtime; /* In jiffies */ - struct list_head queue_list; /* P: uhci->frame_list_lock */ + struct list_head queue_list; }; + /* * Locking in uhci.c * @@ -460,6 +468,5 @@ struct urb_priv { #define PCI_VENDOR_ID_GENESYS 0x17a0 #define PCI_DEVICE_ID_GL880S_UHCI 0x8083 -#define PCI_DEVICE_ID_GL880S_EHCI 0x8084 #endif -- cgit v1.2.3 From dabb592816444fcba1a771e27d4f72a2b8218374 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 22 Sep 2005 23:55:22 -0700 Subject: [PATCH] USB: sisusb warning fix drivers/usb/misc/sisusbvga/sisusb.c: In function `sisusb_reset_text_mode': drivers/usb/misc/sisusbvga/sisusb.c:2461: warning: assignment discards qualifiers from pointer target type Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman drivers/usb/misc/sisusbvga/sisusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/misc/sisusbvga/sisusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 222ae9cd4c7c..c946c9a538a0 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2440,7 +2440,7 @@ int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) { int ret = 0, slot = sisusb->font_slot, i; - struct font_desc *myfont; + const struct font_desc *myfont; u8 *tempbuf; u16 *tempbufb; size_t written; -- cgit v1.2.3 From 22efcf4adec4262e0f49e6225f6cd070e4a85d20 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 26 Sep 2005 16:12:02 -0400 Subject: [PATCH] USB: File-Storage gadget: use the kthread API This patch (as566) converts the File-Storage gadget over to the kthread API. The new code doesn't use kthread_stop because the control thread needs to terminate asynchronously when it receives a signal. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman drivers/usb/gadget/file_storage.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) --- drivers/usb/gadget/file_storage.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index a41d9d4baee3..241c570e541c 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -224,6 +224,7 @@ #include #include #include +#include #include #include #include @@ -669,7 +670,6 @@ struct fsg_dev { wait_queue_head_t thread_wqh; int thread_wakeup_needed; struct completion thread_notifier; - int thread_pid; struct task_struct *thread_task; sigset_t thread_signal_mask; @@ -1084,7 +1084,6 @@ static void wakeup_thread(struct fsg_dev *fsg) static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) { unsigned long flags; - struct task_struct *thread_task; /* Do nothing if a higher-priority exception is already in progress. * If a lower-or-equal priority exception is in progress, preempt it @@ -1093,9 +1092,9 @@ static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) if (fsg->state <= new_state) { fsg->exception_req_tag = fsg->ep0_req_tag; fsg->state = new_state; - thread_task = fsg->thread_task; - if (thread_task) - send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task); + if (fsg->thread_task) + send_sig_info(SIGUSR1, SEND_SIG_FORCED, + fsg->thread_task); } spin_unlock_irqrestore(&fsg->lock, flags); } @@ -3383,11 +3382,6 @@ static int fsg_main_thread(void *fsg_) { struct fsg_dev *fsg = (struct fsg_dev *) fsg_; - fsg->thread_task = current; - - /* Release all our userspace resources */ - daemonize("file-storage-gadget"); - /* Allow the thread to be killed by a signal, but set the signal mask * to block everything but INT, TERM, KILL, and USR1. */ siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) | @@ -3400,9 +3394,6 @@ static int fsg_main_thread(void *fsg_) * that expects a __user pointer and it will work okay. */ set_fs(get_ds()); - /* Wait for the gadget registration to finish up */ - wait_for_completion(&fsg->thread_notifier); - /* The main loop */ while (fsg->state != FSG_STATE_TERMINATED) { if (exception_in_progress(fsg) || signal_pending(current)) { @@ -3440,8 +3431,9 @@ static int fsg_main_thread(void *fsg_) spin_unlock_irq(&fsg->lock); } + spin_lock_irq(&fsg->lock); fsg->thread_task = NULL; - flush_signals(current); + spin_unlock_irq(&fsg->lock); /* In case we are exiting because of a signal, unregister the * gadget driver and close the backing file. */ @@ -3959,10 +3951,12 @@ static int __init fsg_bind(struct usb_gadget *gadget) sprintf(&serial[i], "%02X", c); } - if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS | - CLONE_FILES))) < 0) + fsg->thread_task = kthread_create(fsg_main_thread, fsg, + "file-storage-gadget"); + if (IS_ERR(fsg->thread_task)) { + rc = PTR_ERR(fsg->thread_task); goto out; - fsg->thread_pid = rc; + } INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); @@ -3994,7 +3988,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) DBG(fsg, "removable=%d, stall=%d, buflen=%u\n", mod_data.removable, mod_data.can_stall, mod_data.buflen); - DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid); + DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid); return 0; autoconf_fail: @@ -4093,7 +4087,7 @@ static int __init fsg_init(void) set_bit(REGISTERED, &fsg->atomic_bitflags); /* Tell the thread to start working */ - complete(&fsg->thread_notifier); + wake_up_process(fsg->thread_task); return 0; } module_init(fsg_init); -- cgit v1.2.3 From 74ad9bd2fcf0fa203655e0d904809b06c4202bf8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-) --- drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 15db5e490aa2..e2802bf18095 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -436,9 +436,10 @@ static void hub_power_on(struct usb_hub *hub) { int port1; unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; + u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); /* if hub supports power switching, enable power on each port */ - if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) { + if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) { dev_dbg(hub->intfdev, "enabling power on all ports\n"); for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++) set_port_feature(hub->hdev, port1, @@ -525,6 +526,7 @@ static int hub_configure(struct usb_hub *hub, struct usb_device *hdev = hub->hdev; struct device *hub_dev = hub->intfdev; u16 hubstatus, hubchange; + u16 wHubCharacteristics; unsigned int pipe; int maxp, ret; char *message; @@ -570,9 +572,9 @@ static int hub_configure(struct usb_hub *hub, dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, (hdev->maxchild == 1) ? "" : "s"); - le16_to_cpus(&hub->descriptor->wHubCharacteristics); + wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); - if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) { + if (wHubCharacteristics & HUB_CHAR_COMPOUND) { int i; char portstr [USB_MAXCHILDREN + 1]; @@ -585,7 +587,7 @@ static int hub_configure(struct usb_hub *hub, } else dev_dbg(hub_dev, "standalone hub\n"); - switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) { + switch (wHubCharacteristics & HUB_CHAR_LPSM) { case 0x00: dev_dbg(hub_dev, "ganged power switching\n"); break; @@ -598,7 +600,7 @@ static int hub_configure(struct usb_hub *hub, break; } - switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) { + switch (wHubCharacteristics & HUB_CHAR_OCPM) { case 0x00: dev_dbg(hub_dev, "global over-current protection\n"); break; @@ -638,7 +640,7 @@ static int hub_configure(struct usb_hub *hub, } /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */ - switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) { + switch (wHubCharacteristics & HUB_CHAR_TTTT) { case HUB_TTTT_8_BITS: if (hdev->descriptor.bDeviceProtocol != 0) { hub->tt.think_time = 666; @@ -668,7 +670,7 @@ static int hub_configure(struct usb_hub *hub, } /* probe() zeroes hub->indicator[] */ - if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) { + if (wHubCharacteristics & HUB_CHAR_PORTIND) { hub->has_indicators = 1; dev_dbg(hub_dev, "Port indicators are supported\n"); } @@ -713,7 +715,7 @@ static int hub_configure(struct usb_hub *hub, (hubstatus & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good"); - if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0) + if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0) dev_dbg(hub_dev, "%sover-current condition exists\n", (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); @@ -2432,6 +2434,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, { struct usb_device *hdev = hub->hdev; struct device *hub_dev = hub->intfdev; + u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); int status, i; dev_dbg (hub_dev, @@ -2469,8 +2472,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (!(portstatus & USB_PORT_STAT_CONNECTION)) { /* maybe switch power back on (e.g. root hub was reset) */ - if ((hub->descriptor->wHubCharacteristics - & HUB_CHAR_LPSM) < 2 + if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index e7fa9b5a521e..bf23f8978024 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -131,7 +131,7 @@ struct usb_hub_descriptor { __u8 bDescLength; __u8 bDescriptorType; __u8 bNbrPorts; - __u16 wHubCharacteristics; + __le16 wHubCharacteristics; __u8 bPwrOn2PwrGood; __u8 bHubContrCurrent; /* add 1 bit for hub status change; round to bytes */ -- cgit v1.2.3 From 207c47e1fbc8d51500997bfa67c26c00114fab04 Mon Sep 17 00:00:00 2001 From: Thomas Riewe Date: Thu, 29 Sep 2005 14:57:29 +0200 Subject: [PATCH] drivers/usb/serial/ftdi_sio: add PID/VID We would like to add a PID for the Pyramid Appliance Display, which works on USB via FTDI_SIO. Signed-off-by: Thomas Riewe Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c12a0acf10d..b713113c1650 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -411,6 +411,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 7c65d46c7598..ddb63df31ce6 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -342,6 +342,9 @@ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.3 From ddcad752f206be7a0091a041403c3188f2febd16 Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Mon, 3 Oct 2005 17:24:11 +0300 Subject: [PATCH] pegasus.h This one is a tiny patch adding one more device to the list. Please apply. :) Signed-off-by: Greg Kroah-Hartman drivers/usb/net/pegasus.h | 2 ++ 1 file changed, 2 insertions(+) --- drivers/usb/net/pegasus.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h index b98f2a833442..9fbd59b55cb6 100644 --- a/drivers/usb/net/pegasus.h +++ b/drivers/usb/net/pegasus.h @@ -181,6 +181,8 @@ PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046, DEFAULT_GPIO_RESET ) PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, + DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", VENDOR_ADMTEK, 0x8511, DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) -- cgit v1.2.3 From 521daed8db4443a1574a98fc3abae8e230f09eaa Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 2 Oct 2005 17:15:33 -0700 Subject: [PATCH] safe_serial: use preprocessor directive for error Use valid #preprocessor instruction to generate an error. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/safe_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/serial/safe_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 96a17568cbf1..88bf14abfa7a 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -92,7 +92,7 @@ MODULE_DESCRIPTION (DRIVER_DESC); MODULE_LICENSE("GPL"); #if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT) -#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" +#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" #endif #if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) -- cgit v1.2.3 From d40ece1dc8dcc89ab921755cbc93a5cfb46d0766 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 28 Sep 2005 18:06:04 +0200 Subject: [PATCH] USB: make usb storage note visible in Kconfig the following patch splits the NOTE: in the Device Drivers->USB submenu of Kconfig thus making the whole of it readable on 600x800 terminals. (Otherwise, the line was too big and disappeared into nowhere.) Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- drivers/usb/storage/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index bb9819cc8826..1a9679f76f5a 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,7 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" +comment "may also be needed; see USB_STORAGE Help for more information" depends on USB config USB_STORAGE -- cgit v1.2.3 From a8798533c1f876b97566588cf2bf52458cb4a35d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 29 Sep 2005 00:14:21 +0100 Subject: [PATCH] USB Storage: HP8200: Another device type detection fix There appears to be one more case where the HP8200 CD writer devices are detected as flash readers - when the USB cable is replugged after use, with the power cable still connected. Oddly enough, the identify device command appears to 'fall through' when the devices are in this state, the status register reading exactly the same opcode as the command (0xA1) that was just executed. I think it's safe to label this behaviour as specific to HP8200 devices, I can't get the flash devices to respond like this. This patch should solve the last of the HP8200 issues which have cropped up recently. Signed-off-by: Daniel Drake Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/shuttle_usbat.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- drivers/usb/storage/shuttle_usbat.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 356342c6e7a2..bd448d6c3185 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -855,15 +855,15 @@ static int usbat_identify_device(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for error bit - if (status & 0x01) { - // Device is a CompactFlash reader/writer - US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); - info->devicetype = USBAT_DEV_FLASH; - } else { + // Check for error bit, or if the command 'fell through' + if (status == 0xA1 || !(status & 0x01)) { // Device is HP 8200 US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; + } else { + // Device is a CompactFlash reader/writer + US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); + info->devicetype = USBAT_DEV_FLASH; } return USB_STOR_TRANSPORT_GOOD; -- cgit v1.2.3 From b7b1e65588b8576c66a429a2623c91504efcf751 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 30 Sep 2005 12:49:36 +0100 Subject: [PATCH] usb-storage: Some minor shuttle_usbat cleanups A while ago, Matthew Dharm wrote: > Looks good. Tho, I would like to see a future patch to do two things: > 1) Change comments from C++ style to C-style > 2) Make sure we're naming consistently everywhere SCM, USBAT, > USBAT-02 (most noticably needing fixing is the string used at > transport-selection time, but a sweep of all uses to be consistent > would be in order). Sorry for the long delay, here is a patch to address this. I also clarified some ATA/ATAPI wording + function names. Signed-off-by: Daniel Drake Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/shuttle_usbat.c | 306 ++++++++++++++++++++---------------- drivers/usb/storage/shuttle_usbat.h | 66 +++---- drivers/usb/storage/transport.h | 2 drivers/usb/storage/unusual_devs.h | 10 - drivers/usb/storage/usb.c | 4 5 files changed, 213 insertions(+), 175 deletions(-) --- drivers/usb/storage/shuttle_usbat.c | 306 ++++++++++++++++++++---------------- drivers/usb/storage/shuttle_usbat.h | 66 ++++---- drivers/usb/storage/transport.h | 2 +- drivers/usb/storage/unusual_devs.h | 10 +- drivers/usb/storage/usb.c | 4 +- 5 files changed, 213 insertions(+), 175 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index bd448d6c3185..33c55a6261bb 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1,4 +1,4 @@ -/* Driver for SCM Microsystems USB-ATAPI cable +/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable * * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ * @@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); /* - * Convenience function to produce an ATAPI read/write sectors command + * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write */ -static void usbat_pack_atapi_sector_cmd(unsigned char *buf, +static void usbat_pack_ata_sector_cmd(unsigned char *buf, unsigned char thistime, u32 sector, unsigned char cmd) { @@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; - if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok) + /* error/check condition (0x51 is ok) */ + if (*reply & 0x01 && *reply != 0x51) return USB_STOR_TRANSPORT_FAILED; - if (*reply & 0x20) // device fault + /* device fault */ + if (*reply & 0x20) return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_GOOD; @@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us, command[0] = 0x40; command[1] = USBAT_CMD_SET_FEAT; - // The only bit relevant to ATA access is bit 6 - // which defines 8 bit data access (set) or 16 bit (unset) + /* + * The only bit relevant to ATA access is bit 6 + * which defines 8 bit data access (set) or 16 bit (unset) + */ command[2] = epp_control; - // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, - // ET1 and ET2 define an external event to be checked for on event of a - // _read_blocks or _write_blocks operation. The read/write will not take - // place unless the defined trigger signal is active. + /* + * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, + * ET1 and ET2 define an external event to be checked for on event of a + * _read_blocks or _write_blocks operation. The read/write will not take + * place unless the defined trigger signal is active. + */ command[3] = external_trigger; - // The resultant byte of the mask operation (see mask_byte) is compared for - // equivalence with this test pattern. If equal, the read/write will take - // place. + /* + * The resultant byte of the mask operation (see mask_byte) is compared for + * equivalence with this test pattern. If equal, the read/write will take + * place. + */ command[4] = test_pattern; - // This value is logically ANDed with the status register field specified - // in the read/write command. + /* + * This value is logically ANDed with the status register field specified + * in the read/write command. + */ command[5] = mask_byte; - // If ALQ is set in the qualifier, this field contains the address of the - // registers where the byte count should be read for transferring the data. - // If ALQ is not set, then this field contains the number of bytes to be - // transferred. + /* + * If ALQ is set in the qualifier, this field contains the address of the + * registers where the byte count should be read for transferring the data. + * If ALQ is not set, then this field contains the number of bytes to be + * transferred. + */ command[6] = subcountL; command[7] = subcountH; @@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - if (*status & 0x01) { // check condition + if (*status & 0x01) { /* check condition */ result = usbat_read(us, USBAT_ATA, 0x10, status); return USB_STOR_TRANSPORT_FAILED; } - if (*status & 0x20) // device fault + if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; - if ((*status & 0x80)==0x00) { // not busy + if ((*status & 0x80)==0x00) { /* not busy */ US_DEBUGP("Waited not busy for %d steps\n", i); return USB_STOR_TRANSPORT_GOOD; } if (i<500) - msleep(10); // 5 seconds + msleep(10); /* 5 seconds */ else if (i<700) - msleep(50); // 10 seconds + msleep(50); /* 10 seconds */ else if (i<1200) - msleep(100); // 50 seconds + msleep(100); /* 50 seconds */ else - msleep(1000); // X minutes + msleep(1000); /* X minutes */ } US_DEBUGP("Waited not busy for %d minutes, timing out.\n", @@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (i==0) { cmdlen = 16; - // Write to multiple registers - // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here, - // but that's what came out of the trace every single time. + /* + * Write to multiple registers + * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is + * necessary here, but that's what came out of the + * trace every single time. + */ command[0] = 0x40; command[1] = access | USBAT_CMD_WRITE_REGS; command[2] = 0x07; @@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } else cmdlen = 8; - // Conditionally read or write blocks + /* Conditionally read or write blocks */ command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); command[cmdlen-7] = access | (direction==DMA_TO_DEVICE ? @@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } - - //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n", - // direction == DMA_TO_DEVICE ? "out" : "in", - // len, use_sg); - result = usb_stor_bulk_transfer_sg(us, pipe, content, len, use_sg, NULL); @@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - if (*status & 0x01) // check condition + if (*status & 0x01) /* check condition */ return USB_STOR_TRANSPORT_FAILED; - if (*status & 0x20) // device fault + if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; US_DEBUGP("Redoing %s\n", @@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us, BUG_ON(num_registers > US_IOBUF_SIZE/2); - // Write to multiple registers, ATA access + /* Write to multiple registers, ATA access */ command[0] = 0x40; command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; - // No relevance + /* No relevance */ command[2] = 0; command[3] = 0; command[4] = 0; command[5] = 0; - // Number of bytes to be transferred (incl. addresses and data) + /* Number of bytes to be transferred (incl. addresses and data) */ command[6] = LSB_of(num_registers*2); command[7] = MSB_of(num_registers*2); - // The setup command + /* The setup command */ result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Create the reg/data, reg/data sequence + /* Create the reg/data, reg/data sequence */ for (i=0; isense_key = 0x02; @@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us, return USB_STOR_TRANSPORT_FAILED; } - // Check for media change + /* Check for media change */ rc = usbat_flash_check_media_changed(uio); if (rc == USBAT_FLASH_MEDIA_CHANGED) { - // Reset and re-enable card detect + /* Reset and re-enable card detect */ rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; @@ -855,13 +869,13 @@ static int usbat_identify_device(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for error bit, or if the command 'fell through' + /* Check for error bit, or if the command 'fell through' */ if (status == 0xA1 || !(status & 0x01)) { - // Device is HP 8200 + /* Device is HP 8200 */ US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; } else { - // Device is a CompactFlash reader/writer + /* Device is a CompactFlash reader/writer */ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); info->devicetype = USBAT_DEV_FLASH; } @@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, if (!reply) return USB_STOR_TRANSPORT_ERROR; - // ATAPI command : IDENTIFY DEVICE + /* ATA command : IDENTIFY DEVICE */ rc = usbat_multiple_write(us, registers, command, 3); if (rc != USB_STOR_XFER_GOOD) { US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); @@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, goto leave; } - // Read device status + /* Read device status */ if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { rc = USB_STOR_TRANSPORT_ERROR; goto leave; @@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, msleep(100); - // Read the device identification data + /* Read the device identification data */ rc = usbat_read_block(us, reply, 512); if (rc != USB_STOR_TRANSPORT_GOOD) goto leave; @@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) return result; - // we're working in LBA mode. according to the ATA spec, - // we can support up to 28-bit addressing. I don't know if Jumpshot - // supports beyond 24-bit addressing. It's kind of hard to test - // since it requires > 8GB CF card. + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if Jumpshot + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB CF card. + */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; - // Since we don't read more than 64 KB at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we don't read more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); @@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; do { - // loop, never allocate or transfer more than 64k at once - // (min(128k, 255*info->ssize) is the real limit) + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; - // ATAPI command 0x20 (READ SECTORS) - usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20); + /* ATA command 0x20 (READ SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20); - // Write/execute ATAPI read command + /* Write/execute ATA read command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - // Read the data we just requested + /* Read the data we just requested */ result = usbat_read_blocks(us, buffer, len); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); - // Store the data in the transfer buffer + /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, TO_XFER_BUF); @@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) return result; - // we're working in LBA mode. according to the ATA spec, - // we can support up to 28-bit addressing. I don't know if Jumpshot - // supports beyond 24-bit addressing. It's kind of hard to test - // since it requires > 8GB CF card. + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if the device + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB media. + */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; - // Since we don't write more than 64 KB at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we don't write more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); @@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; do { - // loop, never allocate or transfer more than 64k at once - // (min(128k, 255*info->ssize) is the real limit) + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; - // Get the data from the transfer buffer + /* Get the data from the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, FROM_XFER_BUF); - // ATAPI command 0x30 (WRITE SECTORS) - usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30); + /* ATA command 0x30 (WRITE SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30); - // Write/execute ATAPI write command + /* Write/execute ATA write command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - // Write the data + /* Write the data */ result = usbat_write_blocks(us, buffer, len); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; @@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, srb->transfersize); } - // Since we only read in one block at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ len = (65535/srb->transfersize) * srb->transfersize; US_DEBUGP("Max read is %d bytes\n", len); len = min(len, srb->request_bufflen); buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) // bloody hell! + if (buffer == NULL) /* bloody hell! */ return USB_STOR_TRANSPORT_FAILED; sector = short_pack(data[7+3], data[7+2]); sector <<= 16; sector |= short_pack(data[7+5], data[7+4]); transferred = 0; - sg_segment = 0; // for keeping track of where we are in - sg_offset = 0; // the scatter/gather list + sg_segment = 0; /* for keeping track of where we are in */ + sg_offset = 0; /* the scatter/gather list */ while (transferred != srb->request_bufflen) { if (len > srb->request_bufflen - transferred) len = srb->request_bufflen - transferred; - data[3] = len&0xFF; // (cylL) = expected length (L) - data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ - // Fix up the SCSI command sector and num sectors + /* Fix up the SCSI command sector and num sectors */ - data[7+2] = MSB_of(sector>>16); // SCSI command sector + data[7+2] = MSB_of(sector>>16); /* SCSI command sector */ data[7+3] = LSB_of(sector>>16); data[7+4] = MSB_of(sector&0xFFFF); data[7+5] = LSB_of(sector&0xFFFF); if (data[7+0] == GPCMD_READ_CD) data[7+6] = 0; - data[7+7] = MSB_of(len / srb->transfersize); // SCSI command - data[7+8] = LSB_of(len / srb->transfersize); // num sectors + data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */ + data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, @@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) break; - // Store the data in the transfer buffer + /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, srb, &sg_segment, &sg_offset, TO_XFER_BUF); - // Update the amount transferred and the sector number + /* Update the amount transferred and the sector number */ transferred += len; sector += len / srb->transfersize; - } // while transferred != srb->request_bufflen + } /* while transferred != srb->request_bufflen */ kfree(buffer); return result; @@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us) int selector; unsigned char *status = us->iobuf; - // try device = master, then device = slave. + /* try device = master, then device = slave. */ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != USB_STOR_XFER_GOOD) @@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us) memset(us->extra, 0, sizeof(struct usbat_info)); info = (struct usbat_info *) (us->extra); - // Enable peripheral control signals + /* Enable peripheral control signals */ rc = usbat_write_user_io(us, USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); @@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us) US_DEBUGP("INIT 5\n"); - // Enable peripheral control signals and card detect + /* Enable peripheral control signals and card detect */ rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; @@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us) US_DEBUGP("INIT 9\n"); - // At this point, we need to detect which device we are using + /* At this point, we need to detect which device we are using */ if (usbat_set_transport(us, info)) return USB_STOR_TRANSPORT_ERROR; @@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) data[0] = 0x00; data[1] = 0x00; data[2] = 0x00; - data[3] = len&0xFF; // (cylL) = expected length (L) - data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) - data[5] = 0xB0; // (device sel) = slave - data[6] = 0xA0; // (command) = ATA PACKET COMMAND + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ + data[5] = 0xB0; /* (device sel) = slave */ + data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */ for (i=7; i<19; i++) { registers[i] = 0x10; @@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return result; } - // Write the 12-byte command header. - - // If the command is BLANK then set the timer for 75 minutes. - // Otherwise set it for 10 minutes. - - // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW - // AT SPEED 4 IS UNRELIABLE!!! + /* + * Write the 12-byte command header. + * + * If the command is BLANK then set the timer for 75 minutes. + * Otherwise set it for 10 minutes. + * + * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW + * AT SPEED 4 IS UNRELIABLE!!! + */ if ( (result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, @@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return result; } - // If there is response data to be read in - // then do it here. + /* If there is response data to be read in then do it here. */ if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { - // How many bytes to read in? Check cylL register + /* How many bytes to read in? Check cylL register */ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) { return USB_STOR_TRANSPORT_ERROR; } - if (len > 0xFF) { // need to read cylH also + if (len > 0xFF) { /* need to read cylH also */ len = *status; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != USB_STOR_XFER_GOOD) { @@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + /* hard coded 512 byte sectors as per ATA spec */ + info->ssize = 0x200; US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", info->sectors, info->ssize); - // build the reply - // note: must return the sector number of the last sector, - // *not* the total number of sectors + /* + * build the reply + * note: must return the sector number of the last sector, + * *not* the total number of sectors + */ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); usb_stor_set_xfer_buf(ptr, 8, srb); @@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == READ_12) { - // I don't think we'll ever see a READ_12 but support it anyway... + /* + * I don't think we'll ever see a READ_12 but support it anyway + */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); @@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == WRITE_12) { - // I don't think we'll ever see a WRITE_12 but support it anyway... + /* + * I don't think we'll ever see a WRITE_12 but support it anyway + */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); @@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { - // sure. whatever. not like we can stop the user from popping - // the media out of the device (no locking doors, etc) + /* + * sure. whatever. not like we can stop the user from popping + * the media out of the device (no locking doors, etc) + */ return USB_STOR_TRANSPORT_GOOD; } diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h index 5b8e867e2ae5..25e7d8b340b8 100644 --- a/drivers/usb/storage/shuttle_usbat.h +++ b/drivers/usb/storage/shuttle_usbat.h @@ -55,8 +55,8 @@ #define USBAT_UIO_WRITE 0 /* Qualifier bits */ -#define USBAT_QUAL_FCQ 0x20 // full compare -#define USBAT_QUAL_ALQ 0x10 // auto load subcount +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ /* USBAT Flash Media status types */ #define USBAT_FLASH_MEDIA_NONE 0 @@ -67,39 +67,39 @@ #define USBAT_FLASH_MEDIA_CHANGED 1 /* USBAT ATA registers */ -#define USBAT_ATA_DATA 0x10 // read/write data (R/W) -#define USBAT_ATA_FEATURES 0x11 // set features (W) -#define USBAT_ATA_ERROR 0x11 // error (R) -#define USBAT_ATA_SECCNT 0x12 // sector count (R/W) -#define USBAT_ATA_SECNUM 0x13 // sector number (R/W) -#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W) -#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W) -#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W) -#define USBAT_ATA_STATUS 0x17 // device status (R) -#define USBAT_ATA_CMD 0x17 // device command (W) -#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R) +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ /* USBAT User I/O Data registers */ -#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals -#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only) - // CDT = ACKD & !UI1 & !UI0 -#define USBAT_UIO_1 0x20 // I/O 1 -#define USBAT_UIO_0 0x10 // I/O 0 -#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode -#define USBAT_UIO_UI1 0x04 // Input 1 -#define USBAT_UIO_UI0 0x02 // Input 0 -#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP) +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ /* USBAT User I/O Enable registers */ -#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral -#define USBAT_UIO_ACKD 0x40 // Enable Card Detect -#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input - // If ACKD=1, set OE1 to 1 also. -#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input -#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ /* USBAT Features */ -#define USBAT_FEAT_ETEN 0x80 // External trigger enable +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ #define USBAT_FEAT_U1 0x08 #define USBAT_FEAT_U0 0x04 #define USBAT_FEAT_ET1 0x02 @@ -112,12 +112,12 @@ struct usbat_info { int devicetype; /* Used for Flash readers only */ - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ }; #endif diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 8d9e0663f8fe..0a362cc781ad 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -50,7 +50,7 @@ #define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ #define US_PR_BULK 0x50 /* bulk only */ #ifdef CONFIG_USB_STORAGE_USBAT -#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */ +#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ #endif #ifdef CONFIG_USB_STORAGE_SDDR09 #define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b79dad1b598c..71d051d97b77 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -71,12 +71,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, "HP", "CD-Writer+ 8200e", - US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + US_SC_8070, US_PR_USBAT, init_usbat, 0), UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, "HP", "CD-Writer+ CD-4e", - US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + US_SC_8070, US_PR_USBAT, init_usbat, 0), #endif /* Patch submitted by Mihnea-Costin Grigore */ @@ -333,9 +333,9 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, #ifdef CONFIG_USB_STORAGE_USBAT UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, - "SCM", - "SCM USBAT-02", - US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat, + "Shuttle/SCM", + "USBAT-02", + US_SC_SCSI, US_PR_USBAT, init_usbat, US_FL_SINGLE_LUN), #endif diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index f9a9bfa1aef5..5164900e40c1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -555,8 +555,8 @@ static int get_transport(struct us_data *us) break; #ifdef CONFIG_USB_STORAGE_USBAT - case US_PR_SCM_ATAPI: - us->transport_name = "SCM/ATAPI"; + case US_PR_USBAT: + us->transport_name = "Shuttle USBAT"; us->transport = usbat_transport; us->transport_reset = usb_stor_CB_reset; us->max_lun = 1; -- cgit v1.2.3 From 094ec604721ed2a9a7ed6dfe40fd699b2f53a4c3 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 30 Sep 2005 12:58:13 +0100 Subject: [PATCH] usb-storage: Readd missing SDDR-05b unusual_devs entry Just noticed that the SDDR-05b entry is missing for the shuttle_usbat driver. Looking through BK history it was removed in this patch: http://linux.bkbits.net:8080/linux-2.6/gnupatch@42435730FZQ2XCA6Qv5GPGD4pC4laQ However, at merge time, it looks like the duplicate was already removed, compare these two revisions: http://linux.bkbits.net:8080/linux-2.6/anno/drivers/usb/storage/unusual_devs.h@1.152 http://linux.bkbits.net:8080/linux-2.6/anno/drivers/usb/storage/unusual_devs.h@1.153 Signed-off-by: Daniel Drake Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) --- drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 71d051d97b77..ee9f0502e055 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -702,6 +702,14 @@ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), +#ifdef CONFIG_USB_STORAGE_USBAT +UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, + "Sandisk", + "ImageMate SDDR-05b", + US_SC_SCSI, US_PR_USBAT, init_usbat, + US_FL_SINGLE_LUN ), +#endif + UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, "Sandisk", "ImageMate SDDR-12", -- cgit v1.2.3 From e4a16e0c10a272e53c4a129b155dd711196b1d93 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Fri, 30 Sep 2005 00:20:15 -0700 Subject: [PATCH] Add unusual_dev for iBeat This patch adds the US_FL_IGNORE_RESIDUE flag for the TrekStor i.Beat Joy 2.0. Original version of this patch was sent by Stefan Werner with test/rediff/etc. by me. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ee9f0502e055..730ba8dde9bd 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Reported by Stefan Werner */ +UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, + "TrekStor", + "i.Beat Joy 2.0", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.3 From 880a9b5e7f70632ab60131ce3027da1c63fcd39e Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Fri, 30 Sep 2005 00:27:36 -0700 Subject: [PATCH] Add unusual_devs for iPod Nano This adds US_FL_FIX_CAPACITY for yet _another_ entire block of Apple productIds. They really can't seem to get this right. This one is for the iPod Nano. Reported by Tyson Vinson . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 730ba8dde9bd..a11701840262 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -605,6 +605,16 @@ UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* + * Reported by Tyson Vinson + * This particular productId is the iPod Nano + */ +UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, + "Apple", + "iPod", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + #ifdef CONFIG_USB_STORAGE_JUMPSHOT UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, "Lexar", -- cgit v1.2.3 From 3f8c03ee05801bf8539dd136d9246a416c45052a Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Wed, 28 Sep 2005 21:30:12 +0200 Subject: [PATCH] usb/input/touchkit: add more device IDs add two more device IDs from eGalax' programming guide. thanks to Jonathan Hopper for pointing out. Signed-off-by: Daniel Ritz Signed-off-by: Greg Kroah-Hartman drivers/usb/input/touchkitusb.c | 2 ++ 1 file changed, 2 insertions(+) --- drivers/usb/input/touchkitusb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 3766ccc271be..0043e6ebcd1f 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -75,7 +75,9 @@ struct touchkit_usb { static struct usb_device_id touchkit_devices[] = { {USB_DEVICE(0x3823, 0x0001)}, + {USB_DEVICE(0x0123, 0x0001)}, {USB_DEVICE(0x0eef, 0x0001)}, + {USB_DEVICE(0x0eef, 0x0002)}, {} }; -- cgit v1.2.3 From a922c68732725866c88457026cf06a7620846506 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Oct 2005 16:38:45 -0400 Subject: [PATCH] g_file_storage: fix obscure race condition This patch (as575) fixes an unlikely race in the g_file_storage driver. The problem can occur only when the driver is unbound before its initialization routine has finished. I also took the opportunity to replace kmalloc/memset with kzalloc. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 241c570e541c..86a6aeb9ed76 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3823,12 +3823,11 @@ static int __init fsg_bind(struct usb_gadget *gadget) /* Create the LUNs, open their backing files, and register the * LUN devices in sysfs. */ - fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL); + fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL); if (!fsg->luns) { rc = -ENOMEM; goto out; } - memset(fsg->luns, 0, i * sizeof(struct lun)); fsg->nluns = i; for (i = 0; i < fsg->nluns; ++i) { @@ -3989,6 +3988,11 @@ static int __init fsg_bind(struct usb_gadget *gadget) mod_data.removable, mod_data.can_stall, mod_data.buflen); DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid); + + set_bit(REGISTERED, &fsg->atomic_bitflags); + + /* Tell the thread to start working */ + wake_up_process(fsg->thread_task); return 0; autoconf_fail: @@ -4051,10 +4055,9 @@ static int __init fsg_alloc(void) { struct fsg_dev *fsg; - fsg = kmalloc(sizeof *fsg, GFP_KERNEL); + fsg = kzalloc(sizeof *fsg, GFP_KERNEL); if (!fsg) return -ENOMEM; - memset(fsg, 0, sizeof *fsg); spin_lock_init(&fsg->lock); init_rwsem(&fsg->filesem); init_waitqueue_head(&fsg->thread_wqh); @@ -4080,15 +4083,9 @@ static int __init fsg_init(void) if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; - if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) { + if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) fsg_free(fsg); - return rc; - } - set_bit(REGISTERED, &fsg->atomic_bitflags); - - /* Tell the thread to start working */ - wake_up_process(fsg->thread_task); - return 0; + return rc; } module_init(fsg_init); -- cgit v1.2.3 From bb200f6eac6372839921be1fe87c1f5c292a7bd6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 3 Oct 2005 16:36:29 -0400 Subject: [PATCH] UHCI: unify BIOS handoff and driver reset code This patch (as574) updates the PCI BIOS usb-handoff code for UHCI controllers, making it work like the reset routines in uhci-hcd. This allows uhci-hcd to drop its own routines in favor of the new ones (code-sharing). Once the patch is merged we can turn the usb-handoff option on permanently, as far as UHCI is concerned. OHCI and EHCI may still have some issues. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 142 ++++++++++++++++++++++++++++-------------- drivers/usb/host/uhci-hcd.c | 76 +++------------------- 2 files changed, 106 insertions(+), 112 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 49f7381a6fd3..f7411ca48835 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -9,6 +9,12 @@ */ #include +#ifdef CONFIG_USB_DEBUG +#define DEBUG +#else +#undef DEBUG +#endif + #include #include #include @@ -46,13 +52,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define UHCI_USBLEGSUP 0xc0 /* legacy support */ #define UHCI_USBCMD 0 /* command register */ -#define UHCI_USBSTS 2 /* status register */ #define UHCI_USBINTR 4 /* interrupt register */ -#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ -#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ -#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ -#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ -#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ +#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ +#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ +#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */ +#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */ +#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */ +#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */ +#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */ #define OHCI_CONTROL 0x04 #define OHCI_CMDSTATUS 0x08 @@ -84,57 +91,100 @@ static int __init usb_handoff_early(char *str) } __setup("usb-handoff", usb_handoff_early); -static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +/* + * Make sure the controller is completely inactive, unable to + * generate interrupts or do DMA. + */ +void uhci_reset_hc(struct pci_dev *pdev, unsigned long base) { - unsigned long base = 0; - int wait_time, delta; - u16 val, sts; - int i; + /* Turn off PIRQ enable and SMI enable. (This also turns off the + * BIOS's USB Legacy Support.) Turn off all the R/WC bits too. + */ + pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC); - for (i = 0; i < PCI_ROM_RESOURCE; i++) - if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { - base = pci_resource_start(pdev, i); - break; - } + /* Reset the HC - this will force us to get a + * new notification of any already connected + * ports due to the virtual disconnect that it + * implies. + */ + outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD); + mb(); + udelay(5); + if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET) + dev_warn(&pdev->dev, "HCRESET not completed yet!\n"); + + /* Just to be safe, disable interrupt requests and + * make sure the controller is stopped. + */ + outw(0, base + UHCI_USBINTR); + outw(0, base + UHCI_USBCMD); +} +EXPORT_SYMBOL_GPL(uhci_reset_hc); - if (!base) - return; +/* + * Initialize a controller that was newly discovered or has just been + * resumed. In either case we can't be sure of its previous state. + * + * Returns: 1 if the controller was reset, 0 otherwise. + */ +int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) +{ + u16 legsup; + unsigned int cmd, intr; /* - * stop controller + * When restarting a suspended controller, we expect all the + * settings to be the same as we left them: + * + * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP; + * Controller is stopped and configured with EGSM set; + * No interrupts enabled except possibly Resume Detect. + * + * If any of these conditions are violated we do a complete reset. */ - sts = inw(base + UHCI_USBSTS); - val = inw(base + UHCI_USBCMD); - val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); - outw(val, base + UHCI_USBCMD); + pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup); + if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) { + dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n", + __FUNCTION__, legsup); + goto reset_needed; + } - /* - * wait while it stops if it was running - */ - if ((sts & UHCI_USBSTS_HALTED) == 0) - { - wait_time = 1000; - delta = 100; + cmd = inw(base + UHCI_USBCMD); + if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) || + !(cmd & UHCI_USBCMD_EGSM)) { + dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n", + __FUNCTION__, cmd); + goto reset_needed; + } - do { - outw(0x1f, base + UHCI_USBSTS); - udelay(delta); - wait_time -= delta; - val = inw(base + UHCI_USBSTS); - if (val & UHCI_USBSTS_HALTED) - break; - } while (wait_time > 0); + intr = inw(base + UHCI_USBINTR); + if (intr & (~UHCI_USBINTR_RESUME)) { + dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n", + __FUNCTION__, intr); + goto reset_needed; } + return 0; - /* - * disable interrupts & legacy support - */ - outw(0, base + UHCI_USBINTR); - outw(0x1f, base + UHCI_USBSTS); - pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); - if (val & 0xbf) - pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); +reset_needed: + dev_dbg(&pdev->dev, "Performing full reset\n"); + uhci_reset_hc(pdev, base); + return 1; +} +EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); + +static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +{ + unsigned long base = 0; + int i; + + for (i = 0; i < PCI_ROM_RESOURCE; i++) + if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { + base = pci_resource_start(pdev, i); + break; + } + if (base) + uhci_check_and_reset_hc(pdev, base); } static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 34c9dbc6a156..6df555e3d97c 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -101,37 +101,16 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci); #include "uhci-q.c" #include "uhci-hub.c" +extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); +extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); + /* - * Make sure the controller is completely inactive, unable to - * generate interrupts or do DMA. + * Finish up a host controller reset and update the recorded state. */ -static void reset_hc(struct uhci_hcd *uhci) +static void finish_reset(struct uhci_hcd *uhci) { int port; - /* Turn off PIRQ enable and SMI enable. (This also turns off the - * BIOS's USB Legacy Support.) Turn off all the R/WC bits too. - */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, - USBLEGSUP_RWC); - - /* Reset the HC - this will force us to get a - * new notification of any already connected - * ports due to the virtual disconnect that it - * implies. - */ - outw(USBCMD_HCRESET, uhci->io_addr + USBCMD); - mb(); - udelay(5); - if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET) - dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n"); - - /* Just to be safe, disable interrupt requests and - * make sure the controller is stopped. - */ - outw(0, uhci->io_addr + USBINTR); - outw(0, uhci->io_addr + USBCMD); - /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect * bits in the port status and control registers. * We have to clear them by hand. @@ -153,7 +132,8 @@ static void reset_hc(struct uhci_hcd *uhci) */ static void hc_died(struct uhci_hcd *uhci) { - reset_hc(uhci); + uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr); + finish_reset(uhci); uhci->hc_inaccessible = 1; } @@ -163,44 +143,8 @@ static void hc_died(struct uhci_hcd *uhci) */ static void check_and_reset_hc(struct uhci_hcd *uhci) { - u16 legsup; - unsigned int cmd, intr; - - /* - * When restarting a suspended controller, we expect all the - * settings to be the same as we left them: - * - * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP; - * Controller is stopped and configured with EGSM set; - * No interrupts enabled except possibly Resume Detect. - * - * If any of these conditions are violated we do a complete reset. - */ - pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup); - if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) { - dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n", - __FUNCTION__, legsup); - goto reset_needed; - } - - cmd = inw(uhci->io_addr + USBCMD); - if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) { - dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n", - __FUNCTION__, cmd); - goto reset_needed; - } - - intr = inw(uhci->io_addr + USBINTR); - if (intr & (~USBINTR_RESUME)) { - dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n", - __FUNCTION__, intr); - goto reset_needed; - } - return; - -reset_needed: - dev_dbg(uhci_dev(uhci), "Performing full reset\n"); - reset_hc(uhci); + if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr)) + finish_reset(uhci); } /* @@ -714,7 +658,7 @@ static void uhci_stop(struct usb_hcd *hcd) spin_lock_irq(&uhci->lock); if (!uhci->hc_inaccessible) - reset_hc(uhci); + hc_died(uhci); uhci_scan_schedule(uhci, NULL); spin_unlock_irq(&uhci->lock); -- cgit v1.2.3 From 0c0382e32d46f606951010b202382be14d180a17 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 13 Oct 2005 17:08:02 -0400 Subject: [PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 16 ++++++---------- drivers/usb/core/hcd.h | 23 +++++++++++++++++------ drivers/usb/core/hub.c | 8 ++++---- drivers/usb/gadget/dummy_hcd.c | 22 ++++------------------ drivers/usb/host/ehci-hub.c | 8 ++++---- drivers/usb/host/ehci-pci.c | 4 ++-- drivers/usb/host/isp116x-hcd.c | 12 ++++++------ drivers/usb/host/ohci-au1xxx.c | 4 ++-- drivers/usb/host/ohci-hub.c | 6 +++--- drivers/usb/host/ohci-lh7a404.c | 4 ++-- drivers/usb/host/ohci-omap.c | 4 ++-- drivers/usb/host/ohci-pci.c | 4 ++-- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 4 ++-- drivers/usb/host/ohci-s3c2410.c | 4 ++-- drivers/usb/host/ohci-sa1111.c | 4 ++-- drivers/usb/host/sl811-hcd.c | 16 ++++++++-------- drivers/usb/host/uhci-hcd.c | 4 ++-- 18 files changed, 72 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b7bb8dd1894a..9ad3912a5ed7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1433,16 +1433,16 @@ rescan: #ifdef CONFIG_PM -static int hcd_hub_suspend (struct usb_bus *bus) +int hcd_bus_suspend (struct usb_bus *bus) { struct usb_hcd *hcd; int status; hcd = container_of (bus, struct usb_hcd, self); - if (!hcd->driver->hub_suspend) + if (!hcd->driver->bus_suspend) return -ENOENT; hcd->state = HC_STATE_QUIESCING; - status = hcd->driver->hub_suspend (hcd); + status = hcd->driver->bus_suspend (hcd); if (status == 0) hcd->state = HC_STATE_SUSPENDED; else @@ -1451,18 +1451,18 @@ static int hcd_hub_suspend (struct usb_bus *bus) return status; } -static int hcd_hub_resume (struct usb_bus *bus) +int hcd_bus_resume (struct usb_bus *bus) { struct usb_hcd *hcd; int status; hcd = container_of (bus, struct usb_hcd, self); - if (!hcd->driver->hub_resume) + if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) return 0; hcd->state = HC_STATE_RESUMING; - status = hcd->driver->hub_resume (hcd); + status = hcd->driver->bus_resume (hcd); if (status == 0) hcd->state = HC_STATE_RUNNING; else { @@ -1590,10 +1590,6 @@ static struct usb_operations usb_hcd_operations = { .buffer_alloc = hcd_buffer_alloc, .buffer_free = hcd_buffer_free, .disable = hcd_endpoint_disable, -#ifdef CONFIG_PM - .hub_suspend = hcd_hub_suspend, - .hub_resume = hcd_hub_resume, -#endif }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 74757fc1a99f..d8f0d29a45b7 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -154,10 +154,6 @@ struct usb_operations { void (*disable)(struct usb_device *udev, struct usb_host_endpoint *ep); - - /* global suspend/resume of bus */ - int (*hub_suspend)(struct usb_bus *); - int (*hub_resume)(struct usb_bus *); }; /* each driver provides one of these, and hardware init support */ @@ -212,8 +208,8 @@ struct hc_driver { int (*hub_control) (struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); - int (*hub_suspend)(struct usb_hcd *); - int (*hub_resume)(struct usb_hcd *); + int (*bus_suspend)(struct usb_hcd *); + int (*bus_resume)(struct usb_hcd *); int (*start_port_reset)(struct usb_hcd *, unsigned port_num); void (*hub_irq_enable)(struct usb_hcd *); /* Needed only if port-change IRQs are level-triggered */ @@ -379,6 +375,21 @@ extern int usb_find_interface_driver (struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) +#ifdef CONFIG_PM +extern int hcd_bus_suspend (struct usb_bus *bus); +extern int hcd_bus_resume (struct usb_bus *bus); +#else +static inline int hcd_bus_suspend(struct usb_bus *bus) +{ + return 0; +} + +static inline int hcd_bus_resume (struct usb_bus *bus) +{ + return 0; +} +#endif /* CONFIG_PM */ + /* * USB device fs stuff */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e2802bf18095..273e6ccca213 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1917,8 +1917,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) /* "global suspend" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; - if (bus && bus->op->hub_suspend) { - int status = bus->op->hub_suspend (bus); + if (bus) { + int status = hcd_bus_suspend (bus); if (status != 0) { dev_dbg(&hdev->dev, "'global' suspend %d\n", @@ -1943,8 +1943,8 @@ static int hub_resume(struct usb_interface *intf) /* "global resume" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; - if (bus && bus->op->hub_resume) { - status = bus->op->hub_resume (bus); + if (bus) { + status = hcd_bus_resume (bus); if (status) { dev_dbg(&intf->dev, "'global' resume %d\n", status); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 503201764f6b..c605aaeed636 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1751,7 +1751,7 @@ static int dummy_hub_control ( return retval; } -static int dummy_hub_suspend (struct usb_hcd *hcd) +static int dummy_bus_suspend (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); @@ -1762,7 +1762,7 @@ static int dummy_hub_suspend (struct usb_hcd *hcd) return 0; } -static int dummy_hub_resume (struct usb_hcd *hcd) +static int dummy_bus_resume (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); @@ -1894,8 +1894,8 @@ static const struct hc_driver dummy_hcd = { .hub_status_data = dummy_hub_status, .hub_control = dummy_hub_control, - .hub_suspend = dummy_hub_suspend, - .hub_resume = dummy_hub_resume, + .bus_suspend = dummy_bus_suspend, + .bus_resume = dummy_bus_resume, }; static int dummy_hcd_probe (struct device *dev) @@ -1936,13 +1936,6 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state) dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - usb_lock_device (hcd->self.root_hub); - dummy_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - hcd->state = HC_STATE_SUSPENDED; return 0; } @@ -1955,13 +1948,6 @@ static int dummy_hcd_resume (struct device *dev) hcd = dev_get_drvdata (dev); hcd->state = HC_STATE_RUNNING; -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - usb_lock_device (hcd->self.root_hub); - dummy_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - usb_hcd_poll_rh_status (hcd); return 0; } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 18d3f2270316..88cb4ada686e 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -30,7 +30,7 @@ #ifdef CONFIG_PM -static int ehci_hub_suspend (struct usb_hcd *hcd) +static int ehci_bus_suspend (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int port; @@ -83,7 +83,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd) /* caller has locked the root hub, and should reset/reinit on error */ -static int ehci_hub_resume (struct usb_hcd *hcd) +static int ehci_bus_resume (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; @@ -159,8 +159,8 @@ static int ehci_hub_resume (struct usb_hcd *hcd) #else -#define ehci_hub_suspend NULL -#define ehci_hub_resume NULL +#define ehci_bus_suspend NULL +#define ehci_bus_resume NULL #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 66ebf75b2037..8bbc8dfe19f3 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -363,8 +363,8 @@ static const struct hc_driver ehci_pci_hc_driver = { */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index f68220fc53fd..ddb8fc591466 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1160,7 +1160,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd, #ifdef CONFIG_PM -static int isp116x_hub_suspend(struct usb_hcd *hcd) +static int isp116x_bus_suspend(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); unsigned long flags; @@ -1200,7 +1200,7 @@ static int isp116x_hub_suspend(struct usb_hcd *hcd) return ret; } -static int isp116x_hub_resume(struct usb_hcd *hcd) +static int isp116x_bus_resume(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); u32 val; @@ -1266,8 +1266,8 @@ static int isp116x_hub_resume(struct usb_hcd *hcd) #else -#define isp116x_hub_suspend NULL -#define isp116x_hub_resume NULL +#define isp116x_bus_suspend NULL +#define isp116x_bus_resume NULL #endif @@ -1626,8 +1626,8 @@ static struct hc_driver isp116x_hc_driver = { .hub_status_data = isp116x_hub_status_data, .hub_control = isp116x_hub_control, - .hub_suspend = isp116x_hub_suspend, - .hub_resume = isp116x_hub_resume, + .bus_suspend = isp116x_bus_suspend, + .bus_resume = isp116x_bus_resume, }; /*----------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 550d67a554f6..ac463c493035 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -215,8 +215,8 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 39a60e731ec2..e01e77bc324b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -45,7 +45,7 @@ static void dl_done_list (struct ohci_hcd *, struct pt_regs *); static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *); static int ohci_restart (struct ohci_hcd *ohci); -static int ohci_hub_suspend (struct usb_hcd *hcd) +static int ohci_bus_suspend (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int status = 0; @@ -135,7 +135,7 @@ static inline struct ed *find_head (struct ed *ed) } /* caller has locked the root hub */ -static int ohci_hub_resume (struct usb_hcd *hcd) +static int ohci_bus_resume (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); u32 temp, enables; @@ -362,7 +362,7 @@ done: && usb_trylock_device (hcd->self.root_hub) ) { ohci_vdbg (ohci, "autosuspend\n"); - (void) ohci_hub_suspend (hcd); + (void) ohci_bus_suspend (hcd); usb_unlock_device (hcd->self.root_hub); } #endif diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 71d975ae78bd..e2ed55b69f86 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -194,8 +194,8 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index b3498b9b965f..982cdca22516 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -421,8 +421,8 @@ static const struct hc_driver ohci_omap_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 99a0ad41aec5..a8dde8b75691 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -195,8 +195,8 @@ static const struct hc_driver ohci_pci_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index ec20710e99fe..228845eb7eab 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -164,8 +164,8 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 2e7b48502a3d..d287dcccd415 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -279,8 +279,8 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 922e2a6f46ef..3225d455f459 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -449,8 +449,8 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 13324b7f9c59..fb3221ebbb29 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -236,8 +236,8 @@ static const struct hc_driver ohci_sa1111_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index b5e7a478bc01..1e47c1f86e70 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1363,7 +1363,7 @@ error: #ifdef CONFIG_PM static int -sl811h_hub_suspend(struct usb_hcd *hcd) +sl811h_bus_suspend(struct usb_hcd *hcd) { // SOFs off DBG("%s\n", __FUNCTION__); @@ -1371,7 +1371,7 @@ sl811h_hub_suspend(struct usb_hcd *hcd) } static int -sl811h_hub_resume(struct usb_hcd *hcd) +sl811h_bus_resume(struct usb_hcd *hcd) { // SOFs on DBG("%s\n", __FUNCTION__); @@ -1380,8 +1380,8 @@ sl811h_hub_resume(struct usb_hcd *hcd) #else -#define sl811h_hub_suspend NULL -#define sl811h_hub_resume NULL +#define sl811h_bus_suspend NULL +#define sl811h_bus_resume NULL #endif @@ -1623,8 +1623,8 @@ static struct hc_driver sl811h_hc_driver = { */ .hub_status_data = sl811h_hub_status_data, .hub_control = sl811h_hub_control, - .hub_suspend = sl811h_hub_suspend, - .hub_resume = sl811h_hub_resume, + .bus_suspend = sl811h_bus_suspend, + .bus_resume = sl811h_bus_resume, }; /*-------------------------------------------------------------------------*/ @@ -1791,7 +1791,7 @@ sl811h_suspend(struct device *dev, pm_message_t state) int retval = 0; if (state.event == PM_EVENT_FREEZE) - retval = sl811h_hub_suspend(hcd); + retval = sl811h_bus_suspend(hcd); else if (state.event == PM_EVENT_SUSPEND) port_power(sl811, 0); if (retval == 0) @@ -1816,7 +1816,7 @@ sl811h_resume(struct device *dev) } dev->power.power_state = PMSG_ON; - return sl811h_hub_resume(hcd); + return sl811h_bus_resume(hcd); } #else diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6df555e3d97c..72cd1576d20c 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -804,8 +804,8 @@ static const struct hc_driver uhci_driver = { #ifdef CONFIG_PM .suspend = uhci_suspend, .resume = uhci_resume, - .hub_suspend = uhci_rh_suspend, - .hub_resume = uhci_rh_resume, + .bus_suspend = uhci_rh_suspend, + .bus_resume = uhci_rh_resume, #endif .stop = uhci_stop, -- cgit v1.2.3 From b81d34363c0b17c47f4ef63d5888c4f47f315d29 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 13 Oct 2005 17:00:24 -0400 Subject: [PATCH] UHCI: Improve handling of iso TDs The uhci-hcd driver is fairly lax about the way it handles isochronous transfers. This patch (as579) improves it in three respects: TDs for a new URB aren't added to the schedule until all of them have been allocated. This way there's no risk of the controller executing some of them when an allocation fails. TDs for an unlinked URB are removed from the schedule as soon as the URB is unlinked, rather than waiting until the URB is given back. This way there's no risk of the controller still executing a TD after the URB completes. The urb->error_count values are now reported correctly. Although since they aren't used in any drivers except for debug messages in the system log, probably nobody cares. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-q.c | 39 ++++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 51de06bc438d..7e46887d9e12 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -108,13 +108,16 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, } } -static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) +static inline void uhci_remove_td_frame_list(struct uhci_hcd *uhci, + struct uhci_td *td) { /* If it's not inserted, don't remove it */ - if (td->frame == -1 && list_empty(&td->fl_list)) + if (td->frame == -1) { + WARN_ON(!list_empty(&td->fl_list)); return; + } - if (td->frame != -1 && uhci->frame_cpu[td->frame] == td) { + if (uhci->frame_cpu[td->frame] == td) { if (list_empty(&td->fl_list)) { uhci->frame[td->frame] = td->link; uhci->frame_cpu[td->frame] = NULL; @@ -132,13 +135,20 @@ static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) ptd->link = td->link; } - wmb(); - td->link = UHCI_PTR_TERM; - list_del_init(&td->fl_list); td->frame = -1; } +static void unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb) +{ + struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; + struct uhci_td *td; + + list_for_each_entry(td, &urbp->td_list, list) + uhci_remove_td_frame_list(uhci, td); + wmb(); +} + /* * Inserts a td list into qh. */ @@ -498,7 +508,6 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { uhci_remove_td_from_urb(td); - uhci_remove_td(uhci, td); list_add(&td->remove_list, &uhci->td_remove_list); } @@ -1068,6 +1077,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) struct uhci_td *td; int i, ret, frame; int status, destination; + struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; status = TD_CTRL_ACTIVE | TD_CTRL_IOS; destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); @@ -1076,11 +1086,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) if (ret) return ret; - frame = urb->start_frame; - for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) { - if (!urb->iso_frame_desc[i].length) - continue; - + for (i = 0; i < urb->number_of_packets; i++) { td = uhci_alloc_td(uhci); if (!td) return -ENOMEM; @@ -1091,8 +1097,12 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) if (i + 1 >= urb->number_of_packets) td->status |= cpu_to_le32(TD_CTRL_IOC); + } + frame = urb->start_frame; + list_for_each_entry(td, &urbp->td_list, list) { uhci_insert_td_frame_list(uhci, td, frame); + frame += urb->interval; } return -EINPROGRESS; @@ -1105,7 +1115,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb) int status; int i, ret = 0; - urb->actual_length = 0; + urb->actual_length = urb->error_count = 0; i = 0; list_for_each_entry(td, &urbp->td_list, list) { @@ -1129,6 +1139,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb) i++; } + unlink_isochronous_tds(uhci, urb); return ret; } @@ -1361,6 +1372,8 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) goto done; list_del_init(&urbp->urb_list); + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + unlink_isochronous_tds(uhci, urb); uhci_unlink_generic(uhci, urb); uhci_get_current_frame_number(uhci); -- cgit v1.2.3 From af64a5ebb817532965d18b792d6d74afecfb0bcf Mon Sep 17 00:00:00 2001 From: Henk Date: Wed, 12 Oct 2005 15:02:56 +0200 Subject: [PATCH] USB: Buffer overflow patch for Yealink driver Just a small patch that fixes a small parameter validation bug. drivers/usb/input/map_to_7segment.h: This patch fixes the broken parameter validation in the char to seg7 conversion. This could cause out-of-bounds memory references. MAINTAINERS: Yealink maintainer info now in sorted order. Documentation/input/yealink.txt: Added a Q&A section that answers some common questions. Signed-off-by: Henk Signed-off-by: Greg Kroah-Hartman 006491df1a13f85ad245d1039dfdf20e49c394fd --- Documentation/input/yealink.txt | 19 ++++++++++++++++--- MAINTAINERS | 12 ++++++------ drivers/usb/input/map_to_7segment.h | 2 +- 3 files changed, 23 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt index 85f095a7ad04..0962c5c948be 100644 --- a/Documentation/input/yealink.txt +++ b/Documentation/input/yealink.txt @@ -2,7 +2,6 @@ Driver documentation for yealink usb-p1k phones 0. Status ~~~~~~~~~ - The p1k is a relatively cheap usb 1.1 phone with: - keyboard full support, yealink.ko / input event API - LCD full support, yealink.ko / sysfs API @@ -17,9 +16,8 @@ For vendor documentation see http://www.yealink.com 1. Compilation (stand alone version) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Currently only kernel 2.6.x.y versions are supported. -In order to build the yealink.ko module do: +In order to build the yealink.ko module do make @@ -28,6 +26,21 @@ the Makefile is pointing to the location where your kernel sources are located, default /usr/src/linux. +1.1 Troubleshooting +~~~~~~~~~~~~~~~~~~~ +Q: Module yealink compiled and installed without any problem but phone + is not initialized and does not react to any actions. +A: If you see something like: + hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone + in dmesg, it means that the hid driver has grabbed the device first. Try to + load module yealink before any other usb hid driver. Please see the + instructions provided by your distribution on module configuration. + +Q: Phone is working now (displays version and accepts keypad input) but I can't + find the sysfs files. +A: The sysfs files are located on the particular usb endpoint. On most + distributions you can do: "find /sys/ -name get_icons" for a hint. + 2. keyboard features ~~~~~~~~~~~~~~~~~~~~ diff --git a/MAINTAINERS b/MAINTAINERS index 3928dc7d6ea9..2868b2879755 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -116,12 +116,6 @@ M: ajk@iehk.rwth-aachen.de L: linux-hams@vger.kernel.org S: Maintained -YEALINK PHONE DRIVER -P: Henk Vergonet -M: Henk.Vergonet@gmail.com -L: usbb2k-api-dev@nongnu.org -S: Maintained - 8139CP 10/100 FAST ETHERNET DRIVER P: Jeff Garzik M: jgarzik@pobox.com @@ -2863,6 +2857,12 @@ M: jpr@f6fbb.org L: linux-hams@vger.kernel.org S: Maintained +YEALINK PHONE DRIVER +P: Henk Vergonet +M: Henk.Vergonet@gmail.com +L: usbb2k-api-dev@nongnu.org +S: Maintained + YMFPCI YAMAHA PCI SOUND (Use ALSA instead) P: Pete Zaitcev M: zaitcev@yahoo.com diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h index 52ff27f15127..a424094d9fe2 100644 --- a/drivers/usb/input/map_to_7segment.h +++ b/drivers/usb/input/map_to_7segment.h @@ -79,7 +79,7 @@ struct seg7_conversion_map { static inline int map_to_seg7(struct seg7_conversion_map *map, int c) { - return c & 0x7f ? map->table[c] : -EINVAL; + return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL; } #define SEG7_CONVERSION_MAP(_name, _map) \ -- cgit v1.2.3 From cb97c5c9d0789d65d7ec42a80946fa9eb2ec5182 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 16 Oct 2005 15:06:51 -0700 Subject: [PATCH] omap_udc dma off-by-one fix The change to make DMA work two bytes at a time omitted an important tweak that affects the file_storage gadget: it needs to recognize when the host writes an odd number of bytes. (The network layer ignores such extra bytes.) This patch resolves that issue by checking the relevant bit and adjusting the rx byte count, so that for example a legal 13 byte request doesn't morph into an illegal 14 byte one any more. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b7885dc0f42f..de8a89ae4bc3 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -691,7 +691,7 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req) } static void -finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status) +finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one) { u16 count; @@ -699,6 +699,8 @@ finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status) ep->dma_counter = (u16) (req->req.dma + req->req.actual); count = dma_dest_len(ep, req->req.dma + req->req.actual); count += req->req.actual; + if (one) + count--; if (count <= req->req.length) req->req.actual = count; @@ -747,7 +749,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src) if (!list_empty(&ep->queue)) { req = container_of(ep->queue.next, struct omap_req, queue); - finish_out_dma(ep, req, 0); + finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB); } UDC_IRQ_SRC_REG = UDC_RXN_EOT; @@ -925,7 +927,7 @@ static void dma_channel_release(struct omap_ep *ep) while (UDC_RXDMA_CFG_REG & mask) udelay(10); if (req) - finish_out_dma(ep, req, -ECONNRESET); + finish_out_dma(ep, req, -ECONNRESET, 0); } omap_free_dma(ep->lch); ep->dma_channel = 0; -- cgit v1.2.3 From f37be9b9be3ebc02d2d075d7f53f7802f3e005db Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 17 Oct 2005 10:42:06 -0400 Subject: [PATCH] Fix hcd->state assignments in uhci-hcd This patch (as581) changes the assignments to hcd->state in the uhci-hcd driver. It fixes part of bugzilla entry #5227. The problem was revealed by David's large suite of USB suspend/resume patches; this patch should go to Linus at the same time those do. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 72cd1576d20c..d33ce3982a5f 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -161,8 +161,8 @@ static void configure_hc(struct uhci_hcd *uhci) /* Set the current frame number */ outw(uhci->frame_number, uhci->io_addr + USBFRNUM); - /* Mark controller as running before we enable interrupts */ - uhci_to_hcd(uhci)->state = HC_STATE_RUNNING; + /* Mark controller as not halted before we enable interrupts */ + uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED; mb(); /* Enable PIRQ */ @@ -263,6 +263,7 @@ __acquires(uhci->lock) static void start_rh(struct uhci_hcd *uhci) { + uhci_to_hcd(uhci)->state = HC_STATE_RUNNING; uhci->is_stopped = 0; smp_wmb(); @@ -708,7 +709,6 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) if (uhci->rh_state > UHCI_RH_SUSPENDED) { dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); - hcd->state = HC_STATE_RUNNING; rc = -EBUSY; goto done; }; -- cgit v1.2.3 From 4e67185a7ac3ecb1710e636e2f7e318e99298c7a Mon Sep 17 00:00:00 2001 From: Juha Yrj?l? Date: Sun, 16 Oct 2005 15:47:04 -0700 Subject: [PATCH] add usb transceiver set_suspend() method When a USB device is put into suspend mode, the current drawn from VBUS has to be less than 500 uA. Some transceivers need to be put into a special power-saving mode to accomplish this, and won't have a separate OTG driver handling that. This adds a suspend method to the "otg_transceiver" struct -- misnamed, it's not only for OTG -- and calls it from the OMAP UDC driver. Signed-off-by: Juha Yrj?l? Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 4 ++++ include/linux/usb_otg.h | 13 +++++++++++++ 2 files changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index de8a89ae4bc3..b42799bc747a 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1788,8 +1788,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) udc->driver->suspend(&udc->gadget); spin_lock(&udc->lock); } + if (udc->transceiver) + otg_set_suspend(udc->transceiver, 1); } else { VDBG("resume\n"); + if (udc->transceiver) + otg_set_suspend(udc->transceiver, 0); if (udc->gadget.speed == USB_SPEED_FULL && udc->driver->resume) { spin_unlock(&udc->lock); diff --git a/include/linux/usb_otg.h b/include/linux/usb_otg.h index c6683146e9b0..f827f6e203c2 100644 --- a/include/linux/usb_otg.h +++ b/include/linux/usb_otg.h @@ -63,6 +63,10 @@ struct otg_transceiver { int (*set_power)(struct otg_transceiver *otg, unsigned mA); + /* for non-OTG B devices: set transceiver into suspend mode */ + int (*set_suspend)(struct otg_transceiver *otg, + int suspend); + /* for B devices only: start session with A-Host */ int (*start_srp)(struct otg_transceiver *otg); @@ -107,6 +111,15 @@ otg_set_power(struct otg_transceiver *otg, unsigned mA) return otg->set_power(otg, mA); } +static inline int +otg_set_suspend(struct otg_transceiver *otg, int suspend) +{ + if (otg->set_suspend != NULL) + return otg->set_suspend(otg, suspend); + else + return 0; +} + static inline int otg_start_srp(struct otg_transceiver *otg) { -- cgit v1.2.3 From a85ee6b50c8a1fca4034c8d6b21c91a8de171e01 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 01:23:50 +0100 Subject: [PATCH] USB: S3C2410 OHCI - add driver owner field Initialise the .owner field of the driver with the module that owns it, to aid in linking drivers to modules. Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-s3c2410.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 3225d455f459..fab420a2ce71 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -474,6 +474,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct device *dev) static struct device_driver ohci_hcd_s3c2410_driver = { .name = "s3c2410-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_s3c2410_drv_probe, .remove = ohci_hcd_s3c2410_drv_remove, -- cgit v1.2.3 From d0d5049fb02fc1082c17e08deecd6fed8db549b6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 10:52:33 +0100 Subject: [PATCH] USB: gadget drivers - add .owner initialisation Ensure the the device_driver and usb_gadget_driver have their .owner fields initialised to associate the module owner to the driver. Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 2 ++ drivers/usb/gadget/ether.c | 1 + drivers/usb/gadget/file_storage.c | 1 + drivers/usb/gadget/goku_udc.c | 1 + drivers/usb/gadget/lh7a40x_udc.c | 1 + drivers/usb/gadget/net2280.c | 1 + drivers/usb/gadget/omap_udc.c | 1 + drivers/usb/gadget/pxa2xx_udc.c | 1 + drivers/usb/gadget/zero.c | 1 + 9 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index c605aaeed636..02106bebd5c1 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -967,6 +967,7 @@ static int dummy_udc_resume (struct device *dev) static struct device_driver dummy_udc_driver = { .name = (char *) gadget_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = dummy_udc_probe, .remove = dummy_udc_remove, @@ -1954,6 +1955,7 @@ static int dummy_hcd_resume (struct device *dev) static struct device_driver dummy_hcd_driver = { .name = (char *) driver_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = dummy_hcd_probe, .remove = dummy_hcd_remove, diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index f1024e804d5c..8f402f85e1ca 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -2533,6 +2533,7 @@ static struct usb_gadget_driver eth_driver = { .driver = { .name = (char *) shortname, + .owner = THIS_MODULE, // .shutdown = ... // .suspend = ... // .resume = ... diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 86a6aeb9ed76..ea09aaa3cab6 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -4044,6 +4044,7 @@ static struct usb_gadget_driver fsg_driver = { .driver = { .name = (char *) shortname, + .owner = THIS_MODULE, // .release = ... // .suspend = ... // .resume = ... diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index b0f3cd63e3b9..654469778ab5 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1970,6 +1970,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver goku_pci_driver = { .name = (char *) driver_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = goku_probe, .remove = goku_remove, diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 012d1e5f1524..9b3673904daf 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -2140,6 +2140,7 @@ static int lh7a40x_udc_remove(struct device *_dev) static struct device_driver udc_driver = { .name = (char *)driver_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = lh7a40x_udc_probe, .remove = lh7a40x_udc_remove diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index c32e1f7476da..0dc6bb00bf72 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2948,6 +2948,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver net2280_pci_driver = { .name = (char *) driver_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = net2280_probe, .remove = net2280_remove, diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b42799bc747a..41c96b0afbb3 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2949,6 +2949,7 @@ static int omap_udc_resume(struct device *dev) static struct device_driver udc_driver = { .name = (char *) driver_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = omap_udc_probe, .remove = __exit_p(omap_udc_remove), diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 647028590b23..f83a9262f953 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2631,6 +2631,7 @@ static int pxa2xx_udc_resume(struct device *dev) static struct device_driver udc_driver = { .name = "pxa2xx-udc", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = pxa2xx_udc_probe, .shutdown = pxa2xx_udc_shutdown, diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index ec9c424f1d97..6c58636e914b 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -1302,6 +1302,7 @@ static struct usb_gadget_driver zero_driver = { .driver = { .name = (char *) shortname, + .owner = THIS_MODULE, // .shutdown = ... // .suspend = ... // .resume = ... -- cgit v1.2.3 From efa400db5332ba341cc354c9d8a5298ff57faa98 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 02:32:15 +0100 Subject: [PATCH] USB: add owner initialisation to host drivers Add .owner initialisation to the device drivers in drivers/usb/host so that when built as module the device_driver refers to the owning module Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 1 + drivers/usb/host/ohci-au1xxx.c | 1 + drivers/usb/host/ohci-lh7a404.c | 1 + drivers/usb/host/ohci-omap.c | 1 + drivers/usb/host/ohci-pci.c | 1 + drivers/usb/host/ohci-ppc-soc.c | 1 + drivers/usb/host/sl811-hcd.c | 1 + drivers/usb/host/uhci-hcd.c | 1 + 8 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 8bbc8dfe19f3..7872469ccbb1 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -383,6 +383,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver ehci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index ac463c493035..a277e258eb6c 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -264,6 +264,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev) static struct device_driver ohci_hcd_au1xxx_driver = { .name = "au1xxx-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_au1xxx_drv_probe, .remove = ohci_hcd_au1xxx_drv_remove, diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index e2ed55b69f86..238fa4ade615 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -244,6 +244,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct device *dev) static struct device_driver ohci_hcd_lh7a404_driver = { .name = "lh7a404-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_lh7a404_drv_probe, .remove = ohci_hcd_lh7a404_drv_remove, diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 982cdca22516..45efeed1fcc3 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -492,6 +492,7 @@ static int ohci_omap_resume(struct device *dev) */ static struct device_driver ohci_hcd_omap_driver = { .name = "ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_omap_drv_probe, .remove = ohci_hcd_omap_drv_remove, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index a8dde8b75691..bf1d5ab4aa3a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -216,6 +216,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver ohci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 228845eb7eab..4832e57ae579 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -193,6 +193,7 @@ static int ohci_hcd_ppc_soc_drv_remove(struct device *dev) static struct device_driver ohci_hcd_ppc_soc_driver = { .name = "ppc-soc-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_ppc_soc_drv_probe, .remove = ohci_hcd_ppc_soc_drv_remove, diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 1e47c1f86e70..40169d9cf2b1 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1831,6 +1831,7 @@ sl811h_resume(struct device *dev) struct device_driver sl811h_driver = { .name = (char *) hcd_name, .bus = &platform_bus_type, + .owner = THIS_MODULE, .probe = sl811h_probe, .remove = __devexit_p(sl811h_remove), diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d33ce3982a5f..15e0a511069b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -831,6 +831,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids); static struct pci_driver uhci_pci_driver = { .name = (char *)hcd_name, .id_table = uhci_pci_ids, + .owner = THIS_MODULE, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, -- cgit v1.2.3 From 3e8a556a02d5aa16375d4d74aad0f67cd844c047 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 18 Oct 2005 10:08:31 -0400 Subject: [PATCH] Missing transfer_flags setting in usbtest This patch (as582) adds a missing transfer_flags setting to the usbtest driver. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index d055196533af..90a96257d6ce 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -983,6 +983,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param) reqp->number = i % NUM_SUBCASES; reqp->expected = expected; u->setup_packet = (char *) &reqp->setup; + u->transfer_flags |= URB_NO_SETUP_DMA_MAP; u->context = &context; u->complete = ctrl_complete; -- cgit v1.2.3 From 4592bf5a22593704bb9e8c584a81bf6ca4f6cfec Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: remove the global function usbdev_lookup_minor It's only used locally. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 34 +++++++++++++++++----------------- drivers/usb/core/usb.h | 1 - 2 files changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6c15dabcfc0b..9222b7a13430 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -517,6 +517,23 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig return ret; } +static struct usb_device *usbdev_lookup_minor(int minor) +{ + struct class_device *class_dev; + struct usb_device *dev = NULL; + + down(&usb_device_class->sem); + list_for_each_entry(class_dev, &usb_device_class->children, node) { + if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { + dev = class_dev->class_data; + break; + } + } + up(&usb_device_class->sem); + + return dev; +}; + /* * file operations */ @@ -1533,23 +1550,6 @@ struct file_operations usbfs_device_file_operations = { .release = usbdev_release, }; -struct usb_device *usbdev_lookup_minor(int minor) -{ - struct class_device *class_dev; - struct usb_device *dev = NULL; - - down(&usb_device_class->sem); - list_for_each_entry(class_dev, &usb_device_class->children, node) { - if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - dev = class_dev->class_data; - break; - } - } - up(&usb_device_class->sem); - - return dev; -}; - void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 4d59f6e07999..3dc8096c0f92 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -64,7 +64,6 @@ extern int usbdev_init(void); extern void usbdev_cleanup(void); extern void usbdev_add(struct usb_device *dev); extern void usbdev_remove(struct usb_device *dev); -extern struct usb_device *usbdev_lookup_minor(int minor); struct dev_state { struct list_head list; /* state list */ -- cgit v1.2.3 From 3099e75a7ccc3c5b0a4cf988a76d9c4a7fa5e91a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: add notifier functions to the USB core for devices and busses This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/Makefile | 2 +- drivers/usb/core/hcd.c | 2 + drivers/usb/core/hub.c | 3 ++ drivers/usb/core/notify.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.h | 6 +++ include/linux/usb.h | 8 ++++ 6 files changed, 140 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/core/notify.c (limited to 'drivers') diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index d5503cf0bf74..dd1c4d2a0c31 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -3,7 +3,7 @@ # usbcore-objs := usb.o hub.o hcd.o urb.o message.o \ - config.o file.o buffer.o sysfs.o devio.o + config.o file.o buffer.o sysfs.o devio.o notify.o ifeq ($(CONFIG_PCI),y) usbcore-objs += hcd-pci.o diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9ad3912a5ed7..b700b6cdb683 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -792,6 +792,7 @@ static int usb_register_bus(struct usb_bus *bus) list_add (&bus->bus_list, &usb_bus_list); up (&usb_bus_list_lock); + usb_notify_add_bus(bus); usbfs_add_bus (bus); usbmon_notify_bus_add (bus); @@ -820,6 +821,7 @@ static void usb_deregister_bus (struct usb_bus *bus) list_del (&bus->bus_list); up (&usb_bus_list_lock); + usb_notify_remove_bus(bus); usbmon_notify_bus_remove (bus); usbfs_remove_bus (bus); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 273e6ccca213..4f1a8c8cf92b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1128,6 +1128,8 @@ void usb_disconnect(struct usb_device **pdev) */ usb_disable_device(udev, 0); + usb_notify_remove_device(udev); + /* Free the device number, remove the /proc/bus/usb entry and * the sysfs attributes, and delete the parent's children[] * (or root_hub) pointer. @@ -1371,6 +1373,7 @@ int usb_new_device(struct usb_device *udev) } /* USB device state == configured ... usable */ + usb_notify_add_device(udev); /* add a /proc/bus/usb entry */ usbdev_add(udev); diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c new file mode 100644 index 000000000000..37da059eced7 --- /dev/null +++ b/drivers/usb/core/notify.c @@ -0,0 +1,120 @@ +/* + * All the USB notify logic + * + * (C) Copyright 2005 Greg Kroah-Hartman + * + * notifier functions originally based on those in kernel/sys.c + * but fixed up to not be so broken. + * + */ + + +#include +#include +#include +#ifdef CONFIG_USB_DEBUG + #define DEBUG +#else + #undef DEBUG +#endif +#include + +#include "usb.h" + + +static struct notifier_block *usb_notifier_list; +static DECLARE_MUTEX(usb_notifier_lock); + +static void usb_notifier_chain_register(struct notifier_block **list, + struct notifier_block *n) +{ + down(&usb_notifier_lock); + while (*list) { + if (n->priority > (*list)->priority) + break; + list = &((*list)->next); + } + n->next = *list; + *list = n; + up(&usb_notifier_lock); +} + +static void usb_notifier_chain_unregister(struct notifier_block **nl, + struct notifier_block *n) +{ + down(&usb_notifier_lock); + while ((*nl)!=NULL) { + if ((*nl)==n) { + *nl = n->next; + goto exit; + } + nl=&((*nl)->next); + } +exit: + up(&usb_notifier_lock); +} + +static int usb_notifier_call_chain(struct notifier_block **n, + unsigned long val, void *v) +{ + int ret=NOTIFY_DONE; + struct notifier_block *nb = *n; + + down(&usb_notifier_lock); + while (nb) { + ret = nb->notifier_call(nb,val,v); + if (ret&NOTIFY_STOP_MASK) { + goto exit; + } + nb = nb->next; + } +exit: + up(&usb_notifier_lock); + return ret; +} + +/** + * usb_register_notify - register a notifier callback whenever a usb change happens + * @nb: pointer to the notifier block for the callback events. + * + * These changes are either USB devices or busses being added or removed. + */ +void usb_register_notify(struct notifier_block *nb) +{ + usb_notifier_chain_register(&usb_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(usb_register_notify); + +/** + * usb_unregister_notify - unregister a notifier callback + * @nb: pointer to the notifier block for the callback events. + * + * usb_register_notifier() must have been previously called for this function + * to work properly. + */ +void usb_unregister_notify(struct notifier_block *nb) +{ + usb_notifier_chain_unregister(&usb_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(usb_unregister_notify); + + +void usb_notify_add_device(struct usb_device *udev) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev); +} + +void usb_notify_remove_device(struct usb_device *udev) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev); +} + +void usb_notify_add_bus(struct usb_bus *ubus) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus); +} + +void usb_notify_remove_bus(struct usb_bus *ubus) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus); +} diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 3dc8096c0f92..811cf4482e0d 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -80,3 +80,9 @@ struct dev_state { unsigned long ifclaimed; }; +/* internal notify stuff */ +extern void usb_notify_add_device(struct usb_device *udev); +extern void usb_notify_remove_device(struct usb_device *udev); +extern void usb_notify_add_bus(struct usb_bus *ubus); +extern void usb_notify_remove_bus(struct usb_bus *ubus); + diff --git a/include/linux/usb.h b/include/linux/usb.h index 207b1ad9d990..a2d923fd54f9 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1135,6 +1135,14 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) /* -------------------------------------------------------------------------- */ +/* Events from the usb core */ +#define USB_DEVICE_ADD 0x0001 +#define USB_DEVICE_REMOVE 0x0002 +#define USB_BUS_ADD 0x0003 +#define USB_BUS_REMOVE 0x0004 +extern void usb_register_notify(struct notifier_block *nb); +extern void usb_unregister_notify(struct notifier_block *nb); + #ifdef DEBUG #define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg) #else -- cgit v1.2.3 From a7b986b3e107727dd1c1af0ead0b5e52d7726db3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: convert usbfs/devio.c to use usb notifiers Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 41 ++++++++++++++++++++++++++++++++++------- drivers/usb/core/hub.c | 2 -- drivers/usb/core/usb.h | 2 -- 3 files changed, 34 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 9222b7a13430..2bd742ba812d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include #include @@ -1550,7 +1551,7 @@ struct file_operations usbfs_device_file_operations = { .release = usbdev_release, }; -void usbdev_add(struct usb_device *dev) +static void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); @@ -1561,11 +1562,29 @@ void usbdev_add(struct usb_device *dev) dev->class_dev->class_data = dev; } -void usbdev_remove(struct usb_device *dev) +static void usbdev_remove(struct usb_device *dev) { class_device_unregister(dev->class_dev); } +static int usbdev_notify(struct notifier_block *self, unsigned long action, + void *dev) +{ + switch (action) { + case USB_DEVICE_ADD: + usbdev_add(dev); + break; + case USB_DEVICE_REMOVE: + usbdev_remove(dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block usbdev_nb = { + .notifier_call = usbdev_notify, +}; + static struct cdev usb_device_cdev = { .kobj = {.name = "usb_device", }, .owner = THIS_MODULE, @@ -1585,24 +1604,32 @@ int __init usbdev_init(void) retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX); if (retval) { err("unable to get usb_device major %d", USB_DEVICE_MAJOR); - unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); - goto out; + goto error_cdev; } usb_device_class = class_create(THIS_MODULE, "usb_device"); if (IS_ERR(usb_device_class)) { err("unable to register usb_device class"); retval = PTR_ERR(usb_device_class); - usb_device_class = NULL; - cdev_del(&usb_device_cdev); - unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); + goto error_class; } + usb_register_notify(&usbdev_nb); + out: return retval; + +error_class: + usb_device_class = NULL; + cdev_del(&usb_device_cdev); + +error_cdev: + unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); + goto out; } void usbdev_cleanup(void) { + usb_unregister_notify(&usbdev_nb); class_destroy(usb_device_class); cdev_del(&usb_device_cdev); unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4f1a8c8cf92b..a9d16aff5de5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1137,7 +1137,6 @@ void usb_disconnect(struct usb_device **pdev) dev_dbg (&udev->dev, "unregistering device\n"); release_address(udev); usbfs_remove_device(udev); - usbdev_remove(udev); usb_remove_sysfs_dev_files(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ @@ -1376,7 +1375,6 @@ int usb_new_device(struct usb_device *udev) usb_notify_add_device(udev); /* add a /proc/bus/usb entry */ - usbdev_add(udev); usbfs_add_device(udev); return 0; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 811cf4482e0d..888dbe443695 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -62,8 +62,6 @@ extern void usbfs_conn_disc_event(void); extern int usbdev_init(void); extern void usbdev_cleanup(void); -extern void usbdev_add(struct usb_device *dev); -extern void usbdev_remove(struct usb_device *dev); struct dev_state { struct list_head list; /* state list */ -- cgit v1.2.3 From 54a5c4cd2e4ec0b27c2c3731727f52591456086c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: convert usbfs/inode.c to use usb notifiers Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 -- drivers/usb/core/hcd.h | 10 ---------- drivers/usb/core/hub.c | 3 --- drivers/usb/core/inode.c | 44 +++++++++++++++++++++++++++++++------------- 4 files changed, 31 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b700b6cdb683..16790ad0e2e4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -793,7 +793,6 @@ static int usb_register_bus(struct usb_bus *bus) up (&usb_bus_list_lock); usb_notify_add_bus(bus); - usbfs_add_bus (bus); usbmon_notify_bus_add (bus); dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); @@ -823,7 +822,6 @@ static void usb_deregister_bus (struct usb_bus *bus) usb_notify_remove_bus(bus); usbmon_notify_bus_remove (bus); - usbfs_remove_bus (bus); clear_bit (bus->busnum, busmap.busmap); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index d8f0d29a45b7..cc33886260cd 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -400,23 +400,13 @@ static inline int hcd_bus_resume (struct usb_bus *bus) * these are expected to be called from the USB core/hub thread * with the kernel lock held */ -extern void usbfs_add_bus(struct usb_bus *bus); -extern void usbfs_remove_bus(struct usb_bus *bus); -extern void usbfs_add_device(struct usb_device *dev); -extern void usbfs_remove_device(struct usb_device *dev); extern void usbfs_update_special (void); - extern int usbfs_init(void); extern void usbfs_cleanup(void); #else /* CONFIG_USB_DEVICEFS */ -static inline void usbfs_add_bus(struct usb_bus *bus) {} -static inline void usbfs_remove_bus(struct usb_bus *bus) {} -static inline void usbfs_add_device(struct usb_device *dev) {} -static inline void usbfs_remove_device(struct usb_device *dev) {} static inline void usbfs_update_special (void) {} - static inline int usbfs_init(void) { return 0; } static inline void usbfs_cleanup(void) { } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a9d16aff5de5..6a2ebd89916f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1136,7 +1136,6 @@ void usb_disconnect(struct usb_device **pdev) */ dev_dbg (&udev->dev, "unregistering device\n"); release_address(udev); - usbfs_remove_device(udev); usb_remove_sysfs_dev_files(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ @@ -1374,8 +1373,6 @@ int usb_new_device(struct usb_device *udev) /* USB device state == configured ... usable */ usb_notify_add_device(udev); - /* add a /proc/bus/usb entry */ - usbfs_add_device(udev); return 0; fail: diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index d07bba01995b..12f490fdee8f 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "usb.h" #include "hcd.h" @@ -619,7 +620,7 @@ void usbfs_update_special (void) } } -void usbfs_add_bus(struct usb_bus *bus) +static void usbfs_add_bus(struct usb_bus *bus) { struct dentry *parent; char name[8]; @@ -642,12 +643,9 @@ void usbfs_add_bus(struct usb_bus *bus) err ("error creating usbfs bus entry"); return; } - - usbfs_update_special(); - usbfs_conn_disc_event(); } -void usbfs_remove_bus(struct usb_bus *bus) +static void usbfs_remove_bus(struct usb_bus *bus) { if (bus->usbfs_dentry) { fs_remove_file (bus->usbfs_dentry); @@ -659,12 +657,9 @@ void usbfs_remove_bus(struct usb_bus *bus) remove_special_files(); num_buses = 0; } - - usbfs_update_special(); - usbfs_conn_disc_event(); } -void usbfs_add_device(struct usb_device *dev) +static void usbfs_add_device(struct usb_device *dev) { char name[8]; int i; @@ -690,12 +685,9 @@ void usbfs_add_device(struct usb_device *dev) } if (dev->usbfs_dentry->d_inode) dev->usbfs_dentry->d_inode->i_size = i_size; - - usbfs_update_special(); - usbfs_conn_disc_event(); } -void usbfs_remove_device(struct usb_device *dev) +static void usbfs_remove_device(struct usb_device *dev) { struct dev_state *ds; struct siginfo sinfo; @@ -716,10 +708,33 @@ void usbfs_remove_device(struct usb_device *dev) kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid); } } +} + +static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) +{ + switch (action) { + case USB_DEVICE_ADD: + usbfs_add_device(dev); + break; + case USB_DEVICE_REMOVE: + usbfs_remove_device(dev); + break; + case USB_BUS_ADD: + usbfs_add_bus(dev); + break; + case USB_BUS_REMOVE: + usbfs_remove_bus(dev); + } + usbfs_update_special(); usbfs_conn_disc_event(); + return NOTIFY_OK; } +static struct notifier_block usbfs_nb = { + .notifier_call = usbfs_notify, +}; + /* --------------------------------------------------------------------- */ static struct proc_dir_entry *usbdir = NULL; @@ -732,6 +747,8 @@ int __init usbfs_init(void) if (retval) return retval; + usb_register_notify(&usbfs_nb); + /* create mount point for usbfs */ usbdir = proc_mkdir("usb", proc_bus); @@ -740,6 +757,7 @@ int __init usbfs_init(void) void usbfs_cleanup(void) { + usb_unregister_notify(&usbfs_nb); unregister_filesystem(&usb_fs_type); if (usbdir) remove_proc_entry("usb", proc_bus); -- cgit v1.2.3 From 72adaa962741e8e910300b66bb123b1a9c31a8a8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: convert usbmon to use usb notifiers This also removes 2 usbmon callbacks. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 -- drivers/usb/core/hcd.h | 16 ---------------- drivers/usb/mon/mon_main.c | 23 +++++++++++++++++++++-- 3 files changed, 21 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 16790ad0e2e4..e8f2b8d8f14d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -793,7 +793,6 @@ static int usb_register_bus(struct usb_bus *bus) up (&usb_bus_list_lock); usb_notify_add_bus(bus); - usbmon_notify_bus_add (bus); dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); return 0; @@ -821,7 +820,6 @@ static void usb_deregister_bus (struct usb_bus *bus) up (&usb_bus_list_lock); usb_notify_remove_bus(bus); - usbmon_notify_bus_remove (bus); clear_bit (bus->busnum, busmap.busmap); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index cc33886260cd..a5d92943ff95 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -421,8 +421,6 @@ struct usb_mon_operations { void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); void (*urb_complete)(struct usb_bus *bus, struct urb *urb); /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ - void (*bus_add)(struct usb_bus *bus); - void (*bus_remove)(struct usb_bus *bus); }; extern struct usb_mon_operations *mon_ops; @@ -445,18 +443,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) if (bus->monitored) (*mon_ops->urb_complete)(bus, urb); } - -static inline void usbmon_notify_bus_add(struct usb_bus *bus) -{ - if (mon_ops) - (*mon_ops->bus_add)(bus); -} - -static inline void usbmon_notify_bus_remove(struct usb_bus *bus) -{ - if (mon_ops) - (*mon_ops->bus_remove)(bus); -} int usb_mon_register(struct usb_mon_operations *ops); void usb_mon_deregister(void); @@ -467,8 +453,6 @@ static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, int error) {} static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {} -static inline void usbmon_notify_bus_add(struct usb_bus *bus) {} -static inline void usbmon_notify_bus_remove(struct usb_bus *bus) {} #endif /* CONFIG_USB_MON */ diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 508a21028db4..c34944c75047 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "usb_mon.h" #include "../core/hcd.h" @@ -205,6 +206,23 @@ static void mon_bus_remove(struct usb_bus *ubus) up(&mon_lock); } +static int mon_notify(struct notifier_block *self, unsigned long action, + void *dev) +{ + switch (action) { + case USB_BUS_ADD: + mon_bus_add(dev); + break; + case USB_BUS_REMOVE: + mon_bus_remove(dev); + } + return NOTIFY_OK; +} + +static struct notifier_block mon_nb = { + .notifier_call = mon_notify, +}; + /* * Ops */ @@ -212,8 +230,6 @@ static struct usb_mon_operations mon_ops_0 = { .urb_submit = mon_submit, .urb_submit_error = mon_submit_error, .urb_complete = mon_complete, - .bus_add = mon_bus_add, - .bus_remove = mon_bus_remove, }; /* @@ -329,6 +345,8 @@ static int __init mon_init(void) } // MOD_INC_USE_COUNT(which_module?); + usb_register_notify(&mon_nb); + down(&usb_bus_list_lock); list_for_each_entry (ubus, &usb_bus_list, bus_list) { mon_bus_init(mondir, ubus); @@ -342,6 +360,7 @@ static void __exit mon_exit(void) struct mon_bus *mbus; struct list_head *p; + usb_unregister_notify(&mon_nb); usb_mon_deregister(); down(&mon_lock); -- cgit v1.2.3 From c36fc889b5a4fd66cfd9ba80d9e038745d349567 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 17 Oct 2005 18:15:54 -0700 Subject: [PATCH] usb: Patch for USBDEVFS_IOCTL from 32-bit programs Dell supplied me with the following test: #include #include #include #include #include main(int argc,char*argv[]) { struct usbdevfs_hub_portinfo hubPortInfo = {0}; struct usbdevfs_ioctl command = {0}; command.ifno = 0; command.ioctl_code = USBDEVFS_HUB_PORTINFO; command.data = (void*)&hubPortInfo; int fd, ret; if(argc != 2) { fprintf(stderr,"Usage: %s /proc/bus/usb//\n",argv[0]); fprintf(stderr,"Example: %s /proc/bus/usb/001/001\n",argv[0]); exit(1); } errno = 0; fd = open(argv[1],O_RDWR); if(fd < 0) { perror("open failed:"); exit(errno); } errno = 0; ret = ioctl(fd,USBDEVFS_IOCTL,&command); printf("IOCTL return status:%d\n",ret); if(ret<0) { perror("IOCTL failed:"); close(fd); exit(3); } else { printf("IOCTL passed:Num of ports %d\n",hubPortInfo.nports); close(fd); exit(0); } return 0; } I have verified that it breaks if built in 32 bit mode on x86_64 and that the patch below fixes it. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 56 +++++++++++++++++++++++++++++++++----------- fs/compat_ioctl.c | 1 + include/linux/usbdevice_fs.h | 7 ++++++ 3 files changed, 50 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 2bd742ba812d..ffb2e242b100 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1301,23 +1301,20 @@ static int proc_releaseinterface(struct dev_state *ps, void __user *arg) return 0; } -static int proc_ioctl (struct dev_state *ps, void __user *arg) +static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) { - struct usbdevfs_ioctl ctrl; int size; void *buf = NULL; int retval = 0; struct usb_interface *intf = NULL; struct usb_driver *driver = NULL; - /* get input parameters and alloc buffer */ - if (copy_from_user(&ctrl, arg, sizeof (ctrl))) - return -EFAULT; - if ((size = _IOC_SIZE (ctrl.ioctl_code)) > 0) { + /* alloc buffer */ + if ((size = _IOC_SIZE (ctl->ioctl_code)) > 0) { if ((buf = kmalloc (size, GFP_KERNEL)) == NULL) return -ENOMEM; - if ((_IOC_DIR(ctrl.ioctl_code) & _IOC_WRITE)) { - if (copy_from_user (buf, ctrl.data, size)) { + if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) { + if (copy_from_user (buf, ctl->data, size)) { kfree(buf); return -EFAULT; } @@ -1333,9 +1330,9 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg) if (ps->dev->state != USB_STATE_CONFIGURED) retval = -EHOSTUNREACH; - else if (!(intf = usb_ifnum_to_if (ps->dev, ctrl.ifno))) + else if (!(intf = usb_ifnum_to_if (ps->dev, ctl->ifno))) retval = -EINVAL; - else switch (ctrl.ioctl_code) { + else switch (ctl->ioctl_code) { /* disconnect kernel driver from interface */ case USBDEVFS_DISCONNECT: @@ -1367,7 +1364,7 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg) if (driver == NULL || driver->ioctl == NULL) { retval = -ENOTTY; } else { - retval = driver->ioctl (intf, ctrl.ioctl_code, buf); + retval = driver->ioctl (intf, ctl->ioctl_code, buf); if (retval == -ENOIOCTLCMD) retval = -ENOTTY; } @@ -1376,15 +1373,42 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg) /* cleanup and return */ if (retval >= 0 - && (_IOC_DIR (ctrl.ioctl_code) & _IOC_READ) != 0 + && (_IOC_DIR (ctl->ioctl_code) & _IOC_READ) != 0 && size > 0 - && copy_to_user (ctrl.data, buf, size) != 0) + && copy_to_user (ctl->data, buf, size) != 0) retval = -EFAULT; kfree(buf); return retval; } +static int proc_ioctl_default(struct dev_state *ps, void __user *arg) +{ + struct usbdevfs_ioctl ctrl; + + if (copy_from_user(&ctrl, arg, sizeof (ctrl))) + return -EFAULT; + return proc_ioctl(ps, &ctrl); +} + +#ifdef CONFIG_COMPAT +static int proc_ioctl_compat(struct dev_state *ps, void __user *arg) +{ + struct usbdevfs_ioctl32 __user *uioc; + struct usbdevfs_ioctl ctrl; + u32 udata; + + uioc = compat_ptr(arg); + if (get_user(ctrl.ifno, &uioc->ifno) || + get_user(ctrl.ioctl_code, &uioc->ioctl_code) || + __get_user(udata, &uioc->data)) + return -EFAULT; + ctrl.data = compat_ptr(udata); + + return proc_ioctl(ps, &ctrl); +} +#endif + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -1485,6 +1509,10 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd ret = proc_reapurbnonblock_compat(ps, p); break; + case USBDEVFS_IOCTL32: + snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); + ret = proc_ioctl_compat(ps, p); + break; #endif case USBDEVFS_DISCARDURB: @@ -1519,7 +1547,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd case USBDEVFS_IOCTL: snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); - ret = proc_ioctl(ps, p); + ret = proc_ioctl_default(ps, p); break; } usb_unlock_device(dev); diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index e28a74203f3b..a327e03753ac 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -3050,6 +3050,7 @@ HANDLE_IOCTL(TIOCSSERIAL, serial_struct_ioctl) HANDLE_IOCTL(USBDEVFS_CONTROL32, do_usbdevfs_control) HANDLE_IOCTL(USBDEVFS_BULK32, do_usbdevfs_bulk) HANDLE_IOCTL(USBDEVFS_DISCSIGNAL32, do_usbdevfs_discsignal) +COMPATIBLE_IOCTL(USBDEVFS_IOCTL32) /* i2c */ HANDLE_IOCTL(I2C_FUNCS, w_long) HANDLE_IOCTL(I2C_RDWR, do_i2c_rdwr_ioctl) diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 9facf733800c..8859f0b41543 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -140,6 +140,12 @@ struct usbdevfs_urb32 { compat_caddr_t usercontext; /* unused */ struct usbdevfs_iso_packet_desc iso_frame_desc[0]; }; + +struct usbdevfs_ioctl32 { + s32 ifno; + s32 ioctl_code; + compat_caddr_t data; +}; #endif #define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) @@ -160,6 +166,7 @@ struct usbdevfs_urb32 { #define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int) #define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo) #define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl) +#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32) #define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo) #define USBDEVFS_RESET _IO('U', 20) #define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) -- cgit v1.2.3 From a6c82600d4058346ea6fd801bc21d7abcc1350d8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: delete the bluetty driver We have a real Bluetooth system in Linux, lets finally delete this driver as no one is using it (and if they are, they are using a closed source bluetooth stack, which I can't support anyway.) Marcel, you owe me a beer :) Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 8 - drivers/usb/Makefile | 1 - drivers/usb/class/Kconfig | 23 - drivers/usb/class/Makefile | 1 - drivers/usb/class/bluetty.c | 1279 ------------------------------------------- 5 files changed, 1312 deletions(-) delete mode 100644 drivers/usb/class/bluetty.c (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index 2868b2879755..770155a01523 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2489,14 +2489,6 @@ L: linux-kernel@vger.kernel.org L: linux-usb-devel@lists.sourceforge.net S: Supported -USB BLUETOOTH TTY CONVERTER DRIVER -P: Greg Kroah-Hartman -M: greg@kroah.com -L: linux-usb-users@lists.sourceforge.net -L: linux-usb-devel@lists.sourceforge.net -S: Maintained -W: http://www.kroah.com/linux-usb/ - USB CDC ETHERNET DRIVER P: Greg Kroah-Hartman M: greg@kroah.com diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index aa554f9805ee..a50c2bc506f2 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_ETRAX_USB_HOST) += host/ obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_AUDIO) += class/ -obj-$(CONFIG_USB_BLUETOOTH_TTY) += class/ obj-$(CONFIG_USB_MIDI) += class/ obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 333e39bb105f..ef105a92a7bd 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -28,29 +28,6 @@ config USB_AUDIO To compile this driver as a module, choose M here: the module will be called audio. -comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem" - depends on USB && BT - -config USB_BLUETOOTH_TTY - tristate "USB Bluetooth TTY support" - depends on USB && BT=n - ---help--- - This driver implements a nonstandard tty interface to a Bluetooth - device that can be used only by specialized Bluetooth HCI software. - - Say Y here if you want to use OpenBT Bluetooth stack (available - at ), or other TTY based - Bluetooth stacks, and want to connect a USB Bluetooth device - to your computer's USB port. - - Do *not* enable this driver if you want to use generic Linux - Bluetooth support. - - If in doubt, say N here. - - To compile this driver as a module, choose M here: the - module will be called bluetty. - config USB_MIDI tristate "USB MIDI support" depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile index 971e5497a3fd..229471247751 100644 --- a/drivers/usb/class/Makefile +++ b/drivers/usb/class/Makefile @@ -5,6 +5,5 @@ obj-$(CONFIG_USB_ACM) += cdc-acm.o obj-$(CONFIG_USB_AUDIO) += audio.o -obj-$(CONFIG_USB_BLUETOOTH_TTY) += bluetty.o obj-$(CONFIG_USB_MIDI) += usb-midi.o obj-$(CONFIG_USB_PRINTER) += usblp.o diff --git a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c deleted file mode 100644 index 524023327c49..000000000000 --- a/drivers/usb/class/bluetty.c +++ /dev/null @@ -1,1279 +0,0 @@ -/* - * bluetty.c Version 0.13 - * - * Copyright (C) 2000, 2001 Greg Kroah-Hartman - * Copyright (C) 2000 Mark Douglas Corner - * - * USB Bluetooth TTY driver, based on the Bluetooth Spec version 1.0B - * - * (2001/11/30) Version 0.13 gkh - * - added locking patch from Masoodur Rahman - * - removed active variable, as open_count will do. - * - * (2001/07/09) Version 0.12 gkh - * - removed in_interrupt() call, as it doesn't make sense to do - * that anymore. - * - * (2001/06/05) Version 0.11 gkh - * - Fixed problem with read urb status saying that we have shutdown, - * and that we shouldn't resubmit the urb. Patch from unknown. - * - * (2001/05/28) Version 0.10 gkh - * - Fixed problem with using data from userspace in the bluetooth_write - * function as found by the CHECKER project. - * - Added a buffer to the write_urb_pool which reduces the number of - * buffers being created and destroyed for ever write. Also cleans - * up the logic a bit. - * - Added a buffer to the control_urb_pool which fixes a memory leak - * when the device is removed from the system. - * - * (2001/05/28) Version 0.9 gkh - * Fixed problem with bluetooth==NULL for bluetooth_read_bulk_callback - * which was found by both the CHECKER project and Mikko Rahkonen. - * - * (08/04/2001) gb - * Identify version on module load. - * - * (2001/03/10) Version 0.8 gkh - * Fixed problem with not unlinking interrupt urb on device close - * and resubmitting the read urb on error with bluetooth struct. - * Thanks to Narayan Mohanram for the - * fixes. - * - * (11/29/2000) Version 0.7 gkh - * Fixed problem with overrunning the tty flip buffer. - * Removed unneeded NULL pointer initialization. - * - * (10/05/2000) Version 0.6 gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * Got a real major id number and name. - * - * (08/06/2000) Version 0.5 gkh - * Fixed problem of not resubmitting the bulk read urb if there is - * an error in the callback. Ericsson devices seem to need this. - * - * (07/11/2000) Version 0.4 gkh - * Fixed bug in disconnect for when we call tty_hangup - * Fixed bug in bluetooth_ctrl_msg where the bluetooth struct was not - * getting attached to the control urb properly. - * Fixed bug in bluetooth_write where we pay attention to the result - * of bluetooth_ctrl_msg. - * - * (08/03/2000) Version 0.3 gkh mdc - * Merged in Mark's changes to make the driver play nice with the Axis - * stack. - * Made the write bulk use an urb pool to enable larger transfers with - * fewer calls to the driver. - * Fixed off by one bug in acl pkt receive - * Made packet counters specific to each bluetooth device - * Added checks for zero length callbacks - * Added buffers for int and bulk packets. Had to do this otherwise - * packet types could intermingle. - * Made a control urb pool for the control messages. - * - * (07/11/2000) Version 0.2 gkh - * Fixed a small bug found by Nils Faerber in the usb_bluetooth_probe - * function. - * - * (07/09/2000) Version 0.1 gkh - * Initial release. Has support for sending ACL data (which is really just - * a HCI frame.) Raw HCI commands and HCI events are not supported. - * A ioctl will probably be needed for the HCI commands and events in the - * future. All isoch endpoints are ignored at this time also. - * This driver should work for all currently shipping USB Bluetooth - * devices at this time :) - * - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEBUG -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.13" -#define DRIVER_AUTHOR "Greg Kroah-Hartman, Mark Douglas Corner" -#define DRIVER_DESC "USB Bluetooth tty driver" - -/* define this if you have hardware that is not good */ -/*#define BTBUGGYHARDWARE */ - -/* Class, SubClass, and Protocol codes that describe a Bluetooth device */ -#define WIRELESS_CLASS_CODE 0xe0 -#define RF_SUBCLASS_CODE 0x01 -#define BLUETOOTH_PROGRAMMING_PROTOCOL_CODE 0x01 - - -#define BLUETOOTH_TTY_MAJOR 216 /* real device node major id */ -#define BLUETOOTH_TTY_MINORS 256 /* whole lotta bluetooth devices */ - -#define USB_BLUETOOTH_MAGIC 0x6d02 /* magic number for bluetooth struct */ - -#define BLUETOOTH_CONTROL_REQUEST_TYPE 0x20 - -/* Bluetooth packet types */ -#define CMD_PKT 0x01 -#define ACL_PKT 0x02 -#define SCO_PKT 0x03 -#define EVENT_PKT 0x04 -#define ERROR_PKT 0x05 -#define NEG_PKT 0x06 - -/* Message sizes */ -#define MAX_EVENT_SIZE 0xFF -#define EVENT_HDR_SIZE 3 /* 2 for the header + 1 for the type indicator */ -#define EVENT_BUFFER_SIZE (MAX_EVENT_SIZE + EVENT_HDR_SIZE) - -#define MAX_ACL_SIZE 0xFFFF -#define ACL_HDR_SIZE 5 /* 4 for the header + 1 for the type indicator */ -#define ACL_BUFFER_SIZE (MAX_ACL_SIZE + ACL_HDR_SIZE) - -/* parity check flag */ -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) - -#define NUM_BULK_URBS 24 -#define NUM_CONTROL_URBS 16 - -struct usb_bluetooth { - int magic; - struct usb_device * dev; - struct tty_driver * tty_driver; /* the tty_driver for this device */ - struct tty_struct * tty; /* the corresponding tty for this port */ - - unsigned char minor; /* the starting minor number for this device */ - int throttle; /* throttled by tty layer */ - int open_count; - - __u8 control_out_bInterfaceNum; - struct urb * control_urb_pool[NUM_CONTROL_URBS]; - struct usb_ctrlrequest dr[NUM_CONTROL_URBS]; - - unsigned char * interrupt_in_buffer; - struct urb * interrupt_in_urb; - __u8 interrupt_in_endpointAddress; - __u8 interrupt_in_interval; - int interrupt_in_buffer_size; - - unsigned char * bulk_in_buffer; - struct urb * read_urb; - __u8 bulk_in_endpointAddress; - int bulk_in_buffer_size; - - int bulk_out_buffer_size; - __u8 bulk_out_endpointAddress; - - wait_queue_head_t write_wait; - - struct work_struct work; /* work queue entry for line discipline waking up */ - - unsigned int int_packet_pos; - unsigned char int_buffer[EVENT_BUFFER_SIZE]; - unsigned int bulk_packet_pos; - unsigned char bulk_buffer[ACL_BUFFER_SIZE]; /* 64k preallocated, fix? */ - struct semaphore lock; -}; - - -/* local function prototypes */ -static int bluetooth_open (struct tty_struct *tty, struct file *filp); -static void bluetooth_close (struct tty_struct *tty, struct file *filp); -static int bluetooth_write (struct tty_struct *tty, const unsigned char *buf, int count); -static int bluetooth_write_room (struct tty_struct *tty); -static int bluetooth_chars_in_buffer (struct tty_struct *tty); -static void bluetooth_throttle (struct tty_struct *tty); -static void bluetooth_unthrottle (struct tty_struct *tty); -static int bluetooth_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static void bluetooth_set_termios (struct tty_struct *tty, struct termios *old); - -static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs); -static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs); -static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs); - -static int usb_bluetooth_probe (struct usb_interface *intf, - const struct usb_device_id *id); -static void usb_bluetooth_disconnect (struct usb_interface *intf); - - -static struct usb_device_id usb_bluetooth_ids [] = { - { USB_DEVICE_INFO(WIRELESS_CLASS_CODE, RF_SUBCLASS_CODE, BLUETOOTH_PROGRAMMING_PROTOCOL_CODE) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, usb_bluetooth_ids); - -static struct usb_driver usb_bluetooth_driver = { - .owner = THIS_MODULE, - .name = "bluetty", - .probe = usb_bluetooth_probe, - .disconnect = usb_bluetooth_disconnect, - .id_table = usb_bluetooth_ids, -}; - -static struct tty_driver *bluetooth_tty_driver; -static struct usb_bluetooth *bluetooth_table[BLUETOOTH_TTY_MINORS]; - - -static inline int bluetooth_paranoia_check (struct usb_bluetooth *bluetooth, const char *function) -{ - if (!bluetooth) { - dbg("%s - bluetooth == NULL", function); - return -1; - } - if (bluetooth->magic != USB_BLUETOOTH_MAGIC) { - dbg("%s - bad magic number for bluetooth", function); - return -1; - } - - return 0; -} - - -static inline struct usb_bluetooth* get_usb_bluetooth (struct usb_bluetooth *bluetooth, const char *function) -{ - if (!bluetooth || - bluetooth_paranoia_check (bluetooth, function)) { - /* then say that we don't have a valid usb_bluetooth thing, which will - * end up generating -ENODEV return values */ - return NULL; - } - - return bluetooth; -} - - -static inline struct usb_bluetooth *get_bluetooth_by_index (int index) -{ - return bluetooth_table[index]; -} - - -static int bluetooth_ctrl_msg (struct usb_bluetooth *bluetooth, int request, int value, const unsigned char *buf, int len) -{ - struct urb *urb = NULL; - struct usb_ctrlrequest *dr = NULL; - int i; - int status; - - dbg ("%s", __FUNCTION__); - - /* try to find a free urb in our list */ - for (i = 0; i < NUM_CONTROL_URBS; ++i) { - if (bluetooth->control_urb_pool[i]->status != -EINPROGRESS) { - urb = bluetooth->control_urb_pool[i]; - dr = &bluetooth->dr[i]; - break; - } - } - if (urb == NULL) { - dbg ("%s - no free urbs", __FUNCTION__); - return -ENOMEM; - } - - /* keep increasing the urb transfer buffer to fit the size of the message */ - if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc (len, GFP_KERNEL); - if (urb->transfer_buffer == NULL) { - err ("%s - out of memory", __FUNCTION__); - return -ENOMEM; - } - } - if (urb->transfer_buffer_length < len) { - kfree(urb->transfer_buffer); - urb->transfer_buffer = kmalloc (len, GFP_KERNEL); - if (urb->transfer_buffer == NULL) { - err ("%s - out of memory", __FUNCTION__); - return -ENOMEM; - } - } - memcpy (urb->transfer_buffer, buf, len); - - dr->bRequestType= BLUETOOTH_CONTROL_REQUEST_TYPE; - dr->bRequest = request; - dr->wValue = cpu_to_le16((u16) value); - dr->wIndex = cpu_to_le16((u16) bluetooth->control_out_bInterfaceNum); - dr->wLength = cpu_to_le16((u16) len); - - usb_fill_control_urb (urb, bluetooth->dev, usb_sndctrlpipe(bluetooth->dev, 0), - (unsigned char*)dr, urb->transfer_buffer, len, bluetooth_ctrl_callback, bluetooth); - - /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_KERNEL); - if (status) - dbg("%s - usb_submit_urb(control) failed with status = %d", __FUNCTION__, status); - - return status; -} - - - - - -/***************************************************************************** - * Driver tty interface functions - *****************************************************************************/ -static int bluetooth_open (struct tty_struct *tty, struct file * filp) -{ - struct usb_bluetooth *bluetooth; - int result; - - dbg("%s", __FUNCTION__); - - /* initialize the pointer incase something fails */ - tty->driver_data = NULL; - - /* get the bluetooth object associated with this tty pointer */ - bluetooth = get_bluetooth_by_index (tty->index); - - if (bluetooth_paranoia_check (bluetooth, __FUNCTION__)) { - return -ENODEV; - } - - down (&bluetooth->lock); - - ++bluetooth->open_count; - if (bluetooth->open_count == 1) { - /* set up our structure making the tty driver remember our object, and us it */ - tty->driver_data = bluetooth; - bluetooth->tty = tty; - - /* force low_latency on so that our tty_push actually forces the data through, - * otherwise it is scheduled, and with high data rates (like with OHCI) data - * can get lost. */ - bluetooth->tty->low_latency = 1; - - /* Reset the packet position counters */ - bluetooth->int_packet_pos = 0; - bluetooth->bulk_packet_pos = 0; - -#ifndef BTBUGGYHARDWARE - /* Start reading from the device */ - usb_fill_bulk_urb (bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, - bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result); -#endif - usb_fill_int_urb (bluetooth->interrupt_in_urb, bluetooth->dev, - usb_rcvintpipe(bluetooth->dev, bluetooth->interrupt_in_endpointAddress), - bluetooth->interrupt_in_buffer, - bluetooth->interrupt_in_buffer_size, - bluetooth_int_callback, bluetooth, - bluetooth->interrupt_in_interval); - result = usb_submit_urb(bluetooth->interrupt_in_urb, GFP_KERNEL); - if (result) - dbg("%s - usb_submit_urb(interrupt in) failed with status %d", __FUNCTION__, result); - } - - up(&bluetooth->lock); - - return 0; -} - - -static void bluetooth_close (struct tty_struct *tty, struct file * filp) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not opened", __FUNCTION__); - return; - } - - down (&bluetooth->lock); - - --bluetooth->open_count; - if (bluetooth->open_count <= 0) { - bluetooth->open_count = 0; - - /* shutdown any in-flight urbs that we know about */ - usb_kill_urb (bluetooth->read_urb); - usb_kill_urb (bluetooth->interrupt_in_urb); - } - up(&bluetooth->lock); -} - - -static int bluetooth_write (struct tty_struct * tty, const unsigned char *buf, int count) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - struct urb *urb = NULL; - unsigned char *temp_buffer = NULL; - const unsigned char *current_buffer; - unsigned char *urb_buffer; - int i; - int retval = 0; - - if (!bluetooth) { - return -ENODEV; - } - - dbg("%s - %d byte(s)", __FUNCTION__, count); - - if (!bluetooth->open_count) { - dbg ("%s - device not opened", __FUNCTION__); - return -EINVAL; - } - - if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); - return 0; - } - if (count == 1) { - dbg("%s - write request only included type %d", __FUNCTION__, buf[0]); - return 1; - } - -#ifdef DEBUG - printk (KERN_DEBUG __FILE__ ": %s - length = %d, data = ", __FUNCTION__, count); - for (i = 0; i < count; ++i) { - printk ("%.2x ", buf[i]); - } - printk ("\n"); -#endif - - current_buffer = buf; - - switch (*current_buffer) { - /* First byte indicates the type of packet */ - case CMD_PKT: - /* dbg("%s- Send cmd_pkt len:%d", __FUNCTION__, count);*/ - - retval = bluetooth_ctrl_msg (bluetooth, 0x00, 0x00, ¤t_buffer[1], count-1); - if (retval) { - goto exit; - } - retval = count; - break; - - case ACL_PKT: - ++current_buffer; - --count; - - urb_buffer = kmalloc (count, GFP_ATOMIC); - if (!urb_buffer) { - dev_err(&bluetooth->dev->dev, "out of memory\n"); - retval = -ENOMEM; - goto exit; - } - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - dev_err(&bluetooth->dev->dev, "no more free urbs\n"); - kfree(urb_buffer); - retval = -ENOMEM; - goto exit; - } - memcpy (urb_buffer, current_buffer, count); - - /* build up our urb */ - usb_fill_bulk_urb(urb, bluetooth->dev, - usb_sndbulkpipe(bluetooth->dev, - bluetooth->bulk_out_endpointAddress), - urb_buffer, - count, - bluetooth_write_bulk_callback, - bluetooth); - - - /* send it down the pipe */ - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, retval); - goto exit; - } - - /* we are done with this urb, so let the host driver - * really free it when it is finished with it */ - usb_free_urb (urb); - retval = count + 1; - break; - - default : - dbg("%s - unsupported (at this time) write type", __FUNCTION__); - retval = -EINVAL; - break; - } - -exit: - kfree(temp_buffer); - - return retval; -} - - -static int bluetooth_write_room (struct tty_struct *tty) -{ - dbg("%s", __FUNCTION__); - - /* - * We really can take anything the user throws at us - * but let's pick a nice big number to tell the tty - * layer that we have lots of free space - */ - return 2048; -} - - -static int bluetooth_chars_in_buffer (struct tty_struct *tty) -{ - dbg("%s", __FUNCTION__); - - /* - * We can't really account for how much data we - * have sent out, but hasn't made it through to the - * device, so just tell the tty layer that everything - * is flushed. - */ - return 0; -} - - -static void bluetooth_throttle (struct tty_struct * tty) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - dbg("%s unsupported (at this time)", __FUNCTION__); - - return; -} - - -static void bluetooth_unthrottle (struct tty_struct * tty) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - dbg("%s unsupported (at this time)", __FUNCTION__); -} - - -static int bluetooth_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return -ENODEV; - } - - dbg("%s - cmd 0x%.4x", __FUNCTION__, cmd); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return -ENODEV; - } - - /* FIXME!!! */ - return -ENOIOCTLCMD; -} - - -static void bluetooth_set_termios (struct tty_struct *tty, struct termios * old) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - /* FIXME!!! */ - - return; -} - - -#ifdef BTBUGGYHARDWARE -void btusb_enable_bulk_read(struct tty_struct *tty){ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - int result; - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - if (bluetooth->read_urb) { - usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - err ("%s - failed submitting read urb, error %d", __FUNCTION__, result); - } -} - -void btusb_disable_bulk_read(struct tty_struct *tty){ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - if ((bluetooth->read_urb) && (bluetooth->read_urb->actual_length)) - usb_kill_urb(bluetooth->read_urb); -} -#endif - - -/***************************************************************************** - * urb callback functions - *****************************************************************************/ - - -static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - unsigned char *data = urb->transfer_buffer; - unsigned int i; - unsigned int count = urb->actual_length; - unsigned int packet_size; - int status; - - dbg("%s", __FUNCTION__); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (!count) { - dbg("%s - zero length int", __FUNCTION__); - goto exit; - } - - -#ifdef DEBUG - if (count) { - printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count); - for (i = 0; i < count; ++i) { - printk ("%.2x ", data[i]); - } - printk ("\n"); - } -#endif - -#ifdef BTBUGGYHARDWARE - if ((count >= 2) && (data[0] == 0xFF) && (data[1] == 0x00)) { - data += 2; - count -= 2; - } - if (count == 0) { - urb->actual_length = 0; - goto exit; - } -#endif - /* We add a packet type identifier to the beginning of each - HCI frame. This makes the data in the tty look like a - serial USB devices. Each HCI frame can be broken across - multiple URBs so we buffer them until we have a full hci - packet */ - - if (!bluetooth->int_packet_pos) { - bluetooth->int_buffer[0] = EVENT_PKT; - bluetooth->int_packet_pos++; - } - - if (bluetooth->int_packet_pos + count > EVENT_BUFFER_SIZE) { - err("%s - exceeded EVENT_BUFFER_SIZE", __FUNCTION__); - bluetooth->int_packet_pos = 0; - goto exit; - } - - memcpy (&bluetooth->int_buffer[bluetooth->int_packet_pos], - urb->transfer_buffer, count); - bluetooth->int_packet_pos += count; - urb->actual_length = 0; - - if (bluetooth->int_packet_pos >= EVENT_HDR_SIZE) - packet_size = bluetooth->int_buffer[2]; - else - goto exit; - - if (packet_size + EVENT_HDR_SIZE < bluetooth->int_packet_pos) { - err("%s - packet was too long", __FUNCTION__); - bluetooth->int_packet_pos = 0; - goto exit; - } - - if (packet_size + EVENT_HDR_SIZE == bluetooth->int_packet_pos) { - for (i = 0; i < bluetooth->int_packet_pos; ++i) { - /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them */ - if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(bluetooth->tty); - } - tty_insert_flip_char(bluetooth->tty, bluetooth->int_buffer[i], 0); - } - tty_flip_buffer_push(bluetooth->tty); - - bluetooth->int_packet_pos = 0; - } - -exit: - status = usb_submit_urb (urb, GFP_ATOMIC); - if (status) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, status); -} - - -static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - - dbg("%s", __FUNCTION__); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - if (urb->status) { - dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); - return; - } -} - - -static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - unsigned char *data = urb->transfer_buffer; - unsigned int count = urb->actual_length; - unsigned int i; - unsigned int packet_size; - int result; - - - dbg("%s", __FUNCTION__); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - if (urb->status) { - dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); - if (urb->status == -ENOENT) { - dbg("%s - URB canceled, won't reschedule", __FUNCTION__); - return; - } - goto exit; - } - - if (!count) { - dbg("%s - zero length read bulk", __FUNCTION__); - goto exit; - } - -#ifdef DEBUG - if (count) { - printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count); - for (i = 0; i < count; ++i) { - printk ("%.2x ", data[i]); - } - printk ("\n"); - } -#endif -#ifdef BTBUGGYHARDWARE - if ((count == 4) && (data[0] == 0x00) && (data[1] == 0x00) - && (data[2] == 0x00) && (data[3] == 0x00)) { - urb->actual_length = 0; - usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - - return; - } -#endif - /* We add a packet type identifier to the beginning of each - HCI frame. This makes the data in the tty look like a - serial USB devices. Each HCI frame can be broken across - multiple URBs so we buffer them until we have a full hci - packet */ - - if (!bluetooth->bulk_packet_pos) { - bluetooth->bulk_buffer[0] = ACL_PKT; - bluetooth->bulk_packet_pos++; - } - - if (bluetooth->bulk_packet_pos + count > ACL_BUFFER_SIZE) { - err("%s - exceeded ACL_BUFFER_SIZE", __FUNCTION__); - bluetooth->bulk_packet_pos = 0; - goto exit; - } - - memcpy (&bluetooth->bulk_buffer[bluetooth->bulk_packet_pos], - urb->transfer_buffer, count); - bluetooth->bulk_packet_pos += count; - urb->actual_length = 0; - - if (bluetooth->bulk_packet_pos >= ACL_HDR_SIZE) { - packet_size = CHAR2INT16(bluetooth->bulk_buffer[4],bluetooth->bulk_buffer[3]); - } else { - goto exit; - } - - if (packet_size + ACL_HDR_SIZE < bluetooth->bulk_packet_pos) { - err("%s - packet was too long", __FUNCTION__); - bluetooth->bulk_packet_pos = 0; - goto exit; - } - - if (packet_size + ACL_HDR_SIZE == bluetooth->bulk_packet_pos) { - for (i = 0; i < bluetooth->bulk_packet_pos; ++i) { - /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ - if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(bluetooth->tty); - } - tty_insert_flip_char(bluetooth->tty, bluetooth->bulk_buffer[i], 0); - } - tty_flip_buffer_push(bluetooth->tty); - bluetooth->bulk_packet_pos = 0; - } - -exit: - if (!bluetooth || !bluetooth->open_count) - return; - - usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - - return; -} - - -static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - - dbg("%s", __FUNCTION__); - - /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree(urb->transfer_buffer); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - if (urb->status) { - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); - return; - } - - /* wake up our little function to let the tty layer know that something happened */ - schedule_work(&bluetooth->work); -} - - -static void bluetooth_softint(void *private) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)private, __FUNCTION__); - - dbg("%s", __FUNCTION__); - - if (!bluetooth) - return; - - tty_wakeup(bluetooth->tty); -} - - -static int usb_bluetooth_probe (struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev (intf); - struct usb_bluetooth *bluetooth = NULL; - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct usb_endpoint_descriptor *interrupt_in_endpoint[8]; - struct usb_endpoint_descriptor *bulk_in_endpoint[8]; - struct usb_endpoint_descriptor *bulk_out_endpoint[8]; - int control_out_endpoint; - - int minor; - int buffer_size; - int i; - int num_interrupt_in = 0; - int num_bulk_in = 0; - int num_bulk_out = 0; - - interface = intf->cur_altsetting; - control_out_endpoint = interface->desc.bInterfaceNumber; - - /* find the endpoints that we need */ - for (i = 0; i < interface->desc.bNumEndpoints; ++i) { - endpoint = &interface->endpoint[i].desc; - - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found a bulk in endpoint */ - dbg("found bulk in"); - bulk_in_endpoint[num_bulk_in] = endpoint; - ++num_bulk_in; - } - - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found a bulk out endpoint */ - dbg("found bulk out"); - bulk_out_endpoint[num_bulk_out] = endpoint; - ++num_bulk_out; - } - - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x03)) { - /* we found a interrupt in endpoint */ - dbg("found interrupt in"); - interrupt_in_endpoint[num_interrupt_in] = endpoint; - ++num_interrupt_in; - } - } - - /* according to the spec, we can only have 1 bulk_in, 1 bulk_out, and 1 interrupt_in endpoints */ - if ((num_bulk_in != 1) || - (num_bulk_out != 1) || - (num_interrupt_in != 1)) { - dbg ("%s - improper number of endpoints. Bluetooth driver not bound.", __FUNCTION__); - return -EIO; - } - - info("USB Bluetooth converter detected"); - - for (minor = 0; minor < BLUETOOTH_TTY_MINORS && bluetooth_table[minor]; ++minor) - ; - if (bluetooth_table[minor]) { - err("No more free Bluetooth devices"); - return -ENODEV; - } - - if (!(bluetooth = kmalloc(sizeof(struct usb_bluetooth), GFP_KERNEL))) { - err("Out of memory"); - return -ENOMEM; - } - - memset(bluetooth, 0, sizeof(struct usb_bluetooth)); - - bluetooth->magic = USB_BLUETOOTH_MAGIC; - bluetooth->dev = dev; - bluetooth->minor = minor; - INIT_WORK(&bluetooth->work, bluetooth_softint, bluetooth); - init_MUTEX(&bluetooth->lock); - - /* record the interface number for the control out */ - bluetooth->control_out_bInterfaceNum = control_out_endpoint; - - /* create our control out urb pool */ - for (i = 0; i < NUM_CONTROL_URBS; ++i) { - struct urb *urb = usb_alloc_urb(0, GFP_KERNEL); - if (urb == NULL) { - err("No free urbs available"); - goto probe_error; - } - urb->transfer_buffer = NULL; - bluetooth->control_urb_pool[i] = urb; - } - - /* set up the endpoint information */ - endpoint = bulk_in_endpoint[0]; - bluetooth->read_urb = usb_alloc_urb (0, GFP_KERNEL); - if (!bluetooth->read_urb) { - err("No free urbs available"); - goto probe_error; - } - bluetooth->bulk_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - bluetooth->bulk_in_endpointAddress = endpoint->bEndpointAddress; - bluetooth->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL); - if (!bluetooth->bulk_in_buffer) { - err("Couldn't allocate bulk_in_buffer"); - goto probe_error; - } - usb_fill_bulk_urb(bluetooth->read_urb, dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), - bluetooth->bulk_in_buffer, buffer_size, bluetooth_read_bulk_callback, bluetooth); - - endpoint = bulk_out_endpoint[0]; - bluetooth->bulk_out_endpointAddress = endpoint->bEndpointAddress; - bluetooth->bulk_out_buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; - - endpoint = interrupt_in_endpoint[0]; - bluetooth->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!bluetooth->interrupt_in_urb) { - err("No free urbs available"); - goto probe_error; - } - bluetooth->interrupt_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - bluetooth->interrupt_in_endpointAddress = endpoint->bEndpointAddress; - bluetooth->interrupt_in_interval = endpoint->bInterval; - bluetooth->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL); - if (!bluetooth->interrupt_in_buffer) { - err("Couldn't allocate interrupt_in_buffer"); - goto probe_error; - } - usb_fill_int_urb(bluetooth->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), - bluetooth->interrupt_in_buffer, buffer_size, bluetooth_int_callback, - bluetooth, endpoint->bInterval); - - /* initialize the devfs nodes for this device and let the user know what bluetooths we are bound to */ - tty_register_device (bluetooth_tty_driver, minor, &intf->dev); - info("Bluetooth converter now attached to ttyUB%d (or usb/ttub/%d for devfs)", minor, minor); - - bluetooth_table[minor] = bluetooth; - - /* success */ - usb_set_intfdata (intf, bluetooth); - return 0; - -probe_error: - if (bluetooth->read_urb) - usb_free_urb (bluetooth->read_urb); - if (bluetooth->bulk_in_buffer) - kfree (bluetooth->bulk_in_buffer); - if (bluetooth->interrupt_in_urb) - usb_free_urb (bluetooth->interrupt_in_urb); - if (bluetooth->interrupt_in_buffer) - kfree (bluetooth->interrupt_in_buffer); - for (i = 0; i < NUM_CONTROL_URBS; ++i) - if (bluetooth->control_urb_pool[i]) { - if (bluetooth->control_urb_pool[i]->transfer_buffer) - kfree (bluetooth->control_urb_pool[i]->transfer_buffer); - usb_free_urb (bluetooth->control_urb_pool[i]); - } - - bluetooth_table[minor] = NULL; - - /* free up any memory that we allocated */ - kfree (bluetooth); - return -EIO; -} - - -static void usb_bluetooth_disconnect(struct usb_interface *intf) -{ - struct usb_bluetooth *bluetooth = usb_get_intfdata (intf); - int i; - - usb_set_intfdata (intf, NULL); - if (bluetooth) { - if ((bluetooth->open_count) && (bluetooth->tty)) - tty_hangup(bluetooth->tty); - - bluetooth->open_count = 0; - - if (bluetooth->read_urb) { - usb_kill_urb (bluetooth->read_urb); - usb_free_urb (bluetooth->read_urb); - } - if (bluetooth->bulk_in_buffer) - kfree (bluetooth->bulk_in_buffer); - - if (bluetooth->interrupt_in_urb) { - usb_kill_urb (bluetooth->interrupt_in_urb); - usb_free_urb (bluetooth->interrupt_in_urb); - } - if (bluetooth->interrupt_in_buffer) - kfree (bluetooth->interrupt_in_buffer); - - tty_unregister_device (bluetooth_tty_driver, bluetooth->minor); - - for (i = 0; i < NUM_CONTROL_URBS; ++i) { - if (bluetooth->control_urb_pool[i]) { - usb_kill_urb (bluetooth->control_urb_pool[i]); - if (bluetooth->control_urb_pool[i]->transfer_buffer) - kfree (bluetooth->control_urb_pool[i]->transfer_buffer); - usb_free_urb (bluetooth->control_urb_pool[i]); - } - } - - info("Bluetooth converter now disconnected from ttyUB%d", bluetooth->minor); - - bluetooth_table[bluetooth->minor] = NULL; - - /* free up any memory that we allocated */ - kfree (bluetooth); - } else { - info("device disconnected"); - } -} - -static struct tty_operations bluetooth_ops = { - .open = bluetooth_open, - .close = bluetooth_close, - .write = bluetooth_write, - .write_room = bluetooth_write_room, - .ioctl = bluetooth_ioctl, - .set_termios = bluetooth_set_termios, - .throttle = bluetooth_throttle, - .unthrottle = bluetooth_unthrottle, - .chars_in_buffer = bluetooth_chars_in_buffer, -}; - -static int usb_bluetooth_init(void) -{ - int i; - int result; - - /* Initialize our global data */ - for (i = 0; i < BLUETOOTH_TTY_MINORS; ++i) { - bluetooth_table[i] = NULL; - } - - info ("USB Bluetooth support registered"); - - bluetooth_tty_driver = alloc_tty_driver(BLUETOOTH_TTY_MINORS); - if (!bluetooth_tty_driver) - return -ENOMEM; - - bluetooth_tty_driver->owner = THIS_MODULE; - bluetooth_tty_driver->driver_name = "usb-bluetooth"; - bluetooth_tty_driver->name = "ttyUB"; - bluetooth_tty_driver->devfs_name = "usb/ttub/"; - bluetooth_tty_driver->major = BLUETOOTH_TTY_MAJOR; - bluetooth_tty_driver->minor_start = 0; - bluetooth_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - bluetooth_tty_driver->subtype = SERIAL_TYPE_NORMAL; - bluetooth_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; - bluetooth_tty_driver->init_termios = tty_std_termios; - bluetooth_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty_set_operations(bluetooth_tty_driver, &bluetooth_ops); - if (tty_register_driver (bluetooth_tty_driver)) { - err("%s - failed to register tty driver", __FUNCTION__); - put_tty_driver(bluetooth_tty_driver); - return -1; - } - - /* register the USB driver */ - result = usb_register(&usb_bluetooth_driver); - if (result < 0) { - tty_unregister_driver(bluetooth_tty_driver); - put_tty_driver(bluetooth_tty_driver); - err("usb_register failed for the USB bluetooth driver. Error number %d", result); - return -1; - } - - info(DRIVER_DESC " " DRIVER_VERSION); - - return 0; -} - - -static void usb_bluetooth_exit(void) -{ - usb_deregister(&usb_bluetooth_driver); - tty_unregister_driver(bluetooth_tty_driver); - put_tty_driver(bluetooth_tty_driver); -} - - -module_init(usb_bluetooth_init); -module_exit(usb_bluetooth_exit); - -/* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); - -- cgit v1.2.3 From ea65370d025f5005649e5cb37c4d025e92c6fc38 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: rename usb_serial_device_type to usb_serial_driver I'm tired of trying to explain why a "device_type" is really a driver. This better describes exactly what this structure is. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/bus.c | 28 ++++++++++++++-------------- drivers/usb/serial/cp2101.c | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/cypress_m8.c | 4 ++-- drivers/usb/serial/digi_acceleport.c | 4 ++-- drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/garmin_gps.c | 7 +------ drivers/usb/serial/generic.c | 2 +- drivers/usb/serial/hp4x.c | 2 +- drivers/usb/serial/io_tables.h | 6 +++--- drivers/usb/serial/io_ti.c | 4 ++-- drivers/usb/serial/ipaq.c | 2 +- drivers/usb/serial/ipw.c | 2 +- drivers/usb/serial/ir-usb.c | 2 +- drivers/usb/serial/keyspan.h | 8 ++++---- drivers/usb/serial/keyspan_pda.c | 6 +++--- drivers/usb/serial/kl5kusb105.c | 2 +- drivers/usb/serial/kobil_sct.c | 2 +- drivers/usb/serial/mct_u232.c | 2 +- drivers/usb/serial/omninet.c | 2 +- drivers/usb/serial/option.c | 2 +- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 4 ++-- drivers/usb/serial/usb-serial.c | 30 +++++++++++++++--------------- drivers/usb/serial/usb-serial.h | 28 ++++++++++++++-------------- drivers/usb/serial/visor.c | 6 +++--- drivers/usb/serial/whiteheat.c | 4 ++-- 31 files changed, 85 insertions(+), 90 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 926d4c2c1600..104c04385bb9 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -30,7 +30,7 @@ static struct usb_driver airprime_driver = { .id_table = id_table, }; -static struct usb_serial_device_type airprime_device = { +static struct usb_serial_driver airprime_device = { .owner = THIS_MODULE, .name = "airprime", .id_table = id_table, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index abb1b2c543bb..6d84de40cb7b 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -121,7 +121,7 @@ static struct usb_driver belkin_driver = { }; /* All of the device info needed for the serial converters */ -static struct usb_serial_device_type belkin_device = { +static struct usb_serial_driver belkin_device = { .owner = THIS_MODULE, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 2f612c2d894b..5a0bcd34bb6d 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -18,7 +18,7 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *drv) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; const struct usb_serial_port *port; /* @@ -44,7 +44,7 @@ struct bus_type usb_serial_bus_type = { static int usb_serial_device_probe (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -80,7 +80,7 @@ exit: static int usb_serial_device_remove (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -109,26 +109,26 @@ exit: return retval; } -int usb_serial_bus_register(struct usb_serial_device_type *device) +int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (device->short_name) - device->driver.name = (char *)device->short_name; + if (driver->short_name) + driver->driver.name = (char *)driver->short_name; else - device->driver.name = (char *)device->name; - device->driver.bus = &usb_serial_bus_type; - device->driver.probe = usb_serial_device_probe; - device->driver.remove = usb_serial_device_remove; - device->driver.owner = device->owner; + driver->driver.name = (char *)driver->name; + driver->driver.bus = &usb_serial_bus_type; + driver->driver.probe = usb_serial_device_probe; + driver->driver.remove = usb_serial_device_remove; + driver->driver.owner = driver->owner; - retval = driver_register(&device->driver); + retval = driver_register(&driver->driver); return retval; } -void usb_serial_bus_deregister(struct usb_serial_device_type *device) +void usb_serial_bus_deregister(struct usb_serial_driver *driver) { - driver_unregister (&device->driver); + driver_unregister(&driver->driver); } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 97c78c21e8d1..0b45b58bef5f 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -73,7 +73,7 @@ static struct usb_driver cp2101_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cp2101_device = { +static struct usb_serial_driver cp2101_device = { .owner = THIS_MODULE, .name = "CP2101", .id_table = id_table, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index b5b431067b08..9f421a3c47e8 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -83,7 +83,7 @@ static struct usb_driver cyberjack_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cyberjack_device = { +static struct usb_serial_driver cyberjack_device = { .owner = THIS_MODULE, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 9ee1aaff2fcd..4fb8e59d1527 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -176,7 +176,7 @@ static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, u static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); -static struct usb_serial_device_type cypress_earthmate_device = { +static struct usb_serial_driver cypress_earthmate_device = { .owner = THIS_MODULE, .name = "DeLorme Earthmate USB", .short_name = "earthmate", @@ -203,7 +203,7 @@ static struct usb_serial_device_type cypress_earthmate_device = { .write_int_callback = cypress_write_int_callback, }; -static struct usb_serial_device_type cypress_hidcom_device = { +static struct usb_serial_driver cypress_hidcom_device = { .owner = THIS_MODULE, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index a19a47f6cf12..66feb88b4316 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -503,7 +503,7 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ -static struct usb_serial_device_type digi_acceleport_2_device = { +static struct usb_serial_driver digi_acceleport_2_device = { .owner = THIS_MODULE, .name = "Digi 2 port USB adapter", .short_name = "digi_2", @@ -530,7 +530,7 @@ static struct usb_serial_device_type digi_acceleport_2_device = { .shutdown = digi_shutdown, }; -static struct usb_serial_device_type digi_acceleport_4_device = { +static struct usb_serial_driver digi_acceleport_4_device = { .owner = THIS_MODULE, .name = "Digi 4 port USB adapter", .short_name = "digi_4", diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8d562ab454a8..cbea8b38b60e 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -112,7 +112,7 @@ static struct usb_driver empeg_driver = { .id_table = id_table, }; -static struct usb_serial_device_type empeg_device = { +static struct usb_serial_driver empeg_device = { .owner = THIS_MODULE, .name = "Empeg", .id_table = id_table, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b713113c1650..529e1a7ccfa0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -562,7 +562,7 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud); static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); -static struct usb_serial_device_type ftdi_sio_device = { +static struct usb_serial_driver ftdi_sio_device = { .owner = THIS_MODULE, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 2ef614d5c8f2..7361194f1d66 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1468,13 +1468,8 @@ static void garmin_shutdown (struct usb_serial *serial) } - - - - - /* All of the device info needed */ -static struct usb_serial_device_type garmin_device = { +static struct usb_serial_driver garmin_device = { .owner = THIS_MODULE, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5f7d3193d355..7f567bf96549 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -36,7 +36,7 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ -struct usb_serial_device_type usb_serial_generic_device = { +struct usb_serial_driver usb_serial_generic_device = { .owner = THIS_MODULE, .name = "Generic", .short_name = "generic", diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 64d55fbd206e..b49469907a87 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -44,7 +44,7 @@ static struct usb_driver hp49gp_driver = { .id_table = id_table, }; -static struct usb_serial_device_type hp49gp_device = { +static struct usb_serial_driver hp49gp_device = { .owner = THIS_MODULE, .name = "HP4X", .id_table = id_table, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index e7ffe02408bd..7314c04727fe 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -75,7 +75,7 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); -static struct usb_serial_device_type edgeport_2port_device = { +static struct usb_serial_driver edgeport_2port_device = { .owner = THIS_MODULE, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", @@ -103,7 +103,7 @@ static struct usb_serial_device_type edgeport_2port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_4port_device = { +static struct usb_serial_driver edgeport_4port_device = { .owner = THIS_MODULE, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", @@ -131,7 +131,7 @@ static struct usb_serial_device_type edgeport_4port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_8port_device = { +static struct usb_serial_driver edgeport_8port_device = { .owner = THIS_MODULE, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ebf9967f7c86..4328cc702ef7 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2982,7 +2982,7 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, } -static struct usb_serial_device_type edgeport_1port_device = { +static struct usb_serial_driver edgeport_1port_device = { .owner = THIS_MODULE, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", @@ -3010,7 +3010,7 @@ static struct usb_serial_device_type edgeport_1port_device = { .write_bulk_callback = edge_bulk_out_callback, }; -static struct usb_serial_device_type edgeport_2port_device = { +static struct usb_serial_driver edgeport_2port_device = { .owner = THIS_MODULE, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index c05c2a2a0f31..9a79ad8d7a5f 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -547,7 +547,7 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ -static struct usb_serial_device_type ipaq_device = { +static struct usb_serial_driver ipaq_device = { .owner = THIS_MODULE, .name = "PocketPC PDA", .id_table = ipaq_id_table, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 85e242459c27..04524d34de3b 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -443,7 +443,7 @@ static int ipw_disconnect(struct usb_serial_port *port) return 0; } -static struct usb_serial_device_type ipw_device = { +static struct usb_serial_driver ipw_device = { .owner = THIS_MODULE, .name = "IPWireless converter", .short_name = "ipw", diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 937b2fdd7171..ecfb2060ea0f 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -133,7 +133,7 @@ static struct usb_driver ir_driver = { }; -static struct usb_serial_device_type ir_device = { +static struct usb_serial_driver ir_device = { .owner = THIS_MODULE, .name = "IR Dongle", .id_table = id_table, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index e9b45b768aca..97e7d9e53e39 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -570,7 +570,7 @@ static struct usb_device_id keyspan_4port_ids[] = { }; /* Structs for the devices, pre and post renumeration. */ -static struct usb_serial_device_type keyspan_pre_device = { +static struct usb_serial_driver keyspan_pre_device = { .owner = THIS_MODULE, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", @@ -582,7 +582,7 @@ static struct usb_serial_device_type keyspan_pre_device = { .attach = keyspan_fake_startup, }; -static struct usb_serial_device_type keyspan_1port_device = { +static struct usb_serial_driver keyspan_1port_device = { .owner = THIS_MODULE, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", @@ -607,7 +607,7 @@ static struct usb_serial_device_type keyspan_1port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_2port_device = { +static struct usb_serial_driver keyspan_2port_device = { .owner = THIS_MODULE, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", @@ -632,7 +632,7 @@ static struct usb_serial_device_type keyspan_2port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_4port_device = { +static struct usb_serial_driver keyspan_4port_device = { .owner = THIS_MODULE, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 635c384cb15a..8fad0e963dd3 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -783,7 +783,7 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) } #ifdef KEYSPAN -static struct usb_serial_device_type keyspan_pda_fake_device = { +static struct usb_serial_driver keyspan_pda_fake_device = { .owner = THIS_MODULE, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", @@ -797,7 +797,7 @@ static struct usb_serial_device_type keyspan_pda_fake_device = { #endif #ifdef XIRCOM -static struct usb_serial_device_type xircom_pgs_fake_device = { +static struct usb_serial_driver xircom_pgs_fake_device = { .owner = THIS_MODULE, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", @@ -810,7 +810,7 @@ static struct usb_serial_device_type xircom_pgs_fake_device = { }; #endif -static struct usb_serial_device_type keyspan_pda_device = { +static struct usb_serial_driver keyspan_pda_device = { .owner = THIS_MODULE, .name = "Keyspan PDA", .short_name = "keyspan_pda", diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a11e829e38c8..be082706b952 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -123,7 +123,7 @@ static struct usb_driver kl5kusb105d_driver = { .id_table = id_table, }; -static struct usb_serial_device_type kl5kusb105d_device = { +static struct usb_serial_driver kl5kusb105d_device = { .owner = THIS_MODULE, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fe4c98a75171..94944340bb8d 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -105,7 +105,7 @@ static struct usb_driver kobil_driver = { }; -static struct usb_serial_device_type kobil_device = { +static struct usb_serial_driver kobil_device = { .owner = THIS_MODULE, .name = "KOBIL USB smart card terminal", .id_table = id_table, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 50b6369647d2..9470964316a7 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -132,7 +132,7 @@ static struct usb_driver mct_u232_driver = { .id_table = id_table_combined, }; -static struct usb_serial_device_type mct_u232_device = { +static struct usb_serial_driver mct_u232_device = { .owner = THIS_MODULE, .name = "MCT U232", .short_name = "mct_u232", diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6a99ae192df1..53c0588877c0 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -88,7 +88,7 @@ static struct usb_driver omninet_driver = { }; -static struct usb_serial_device_type zyxel_omninet_device = { +static struct usb_serial_driver zyxel_omninet_device = { .owner = THIS_MODULE, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4989e5740d18..6ec9266e2e96 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -105,7 +105,7 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, wich the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_device_type option_3port_device = { +static struct usb_serial_driver option_3port_device = { .owner = THIS_MODULE, .name = "Option 3G data card", .short_name = "option", diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3cf245bdda54..7134648e078d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -175,7 +175,7 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_device_type pl2303_device = { +static struct usb_serial_driver pl2303_device = { .owner = THIS_MODULE, .name = "PL-2303", .id_table = id_table, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 88bf14abfa7a..87871bb647df 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -397,7 +397,7 @@ static int safe_startup (struct usb_serial *serial) return 0; } -static struct usb_serial_device_type safe_device = { +static struct usb_serial_driver safe_device = { .owner = THIS_MODULE, .name = "Safe", .id_table = id_table, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 59c88de3e7ae..f2efaf6f3d76 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -255,7 +255,7 @@ static struct usb_driver ti_usb_driver = { .id_table = ti_id_table_combined, }; -static struct usb_serial_device_type ti_1port_device = { +static struct usb_serial_driver ti_1port_device = { .owner = THIS_MODULE, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, @@ -282,7 +282,7 @@ static struct usb_serial_device_type ti_1port_device = { .write_bulk_callback = ti_bulk_out_callback, }; -static struct usb_serial_device_type ti_2port_device = { +static struct usb_serial_driver ti_2port_device = { .owner = THIS_MODULE, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e77fbdfc782d..cf083da15eb4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -823,7 +823,7 @@ static void port_release(struct device *dev) static struct usb_serial * create_serial (struct usb_device *dev, struct usb_interface *interface, - struct usb_serial_device_type *type) + struct usb_serial_driver *driver) { struct usb_serial *serial; @@ -834,22 +834,22 @@ static struct usb_serial * create_serial (struct usb_device *dev, } memset (serial, 0, sizeof(*serial)); serial->dev = usb_get_dev(dev); - serial->type = type; + serial->type = driver; serial->interface = interface; kref_init(&serial->kref); return serial; } -static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface) +static struct usb_serial_driver *search_serial_device(struct usb_interface *iface) { struct list_head *p; const struct usb_device_id *id; - struct usb_serial_device_type *t; + struct usb_serial_driver *t; /* List trough know devices and see if the usb id matches */ list_for_each(p, &usb_serial_driver_list) { - t = list_entry(p, struct usb_serial_device_type, driver_list); + t = list_entry(p, struct usb_serial_driver, driver_list); id = usb_match_id(iface, t->id_table); if (id != NULL) { dbg("descriptor matches"); @@ -872,7 +872,7 @@ int usb_serial_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; - struct usb_serial_device_type *type = NULL; + struct usb_serial_driver *type = NULL; int retval; int minor; int buffer_size; @@ -1375,7 +1375,7 @@ module_exit(usb_serial_exit); } \ } while (0) -static void fixup_generic(struct usb_serial_device_type *device) +static void fixup_generic(struct usb_serial_driver *device) { set_to_generic_if_null(device, open); set_to_generic_if_null(device, write); @@ -1387,28 +1387,28 @@ static void fixup_generic(struct usb_serial_device_type *device) set_to_generic_if_null(device, shutdown); } -int usb_serial_register(struct usb_serial_device_type *new_device) +int usb_serial_register(struct usb_serial_driver *driver) { int retval; - fixup_generic(new_device); + fixup_generic(driver); /* Add this device to our list of devices */ - list_add(&new_device->driver_list, &usb_serial_driver_list); + list_add(&driver->driver_list, &usb_serial_driver_list); - retval = usb_serial_bus_register(new_device); + retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, new_device->name); - list_del(&new_device->driver_list); + err("problem %d when registering driver %s", retval, driver->name); + list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", new_device->name); + info("USB Serial support registered for %s", driver->name); return retval; } -void usb_serial_deregister(struct usb_serial_device_type *device) +void usb_serial_deregister(struct usb_serial_driver *device) { info("USB Serial deregistering driver %s", device->name); list_del(&device->driver_list); diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 57f92f054c75..d6738b1b0429 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -143,7 +143,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void /** * usb_serial - structure used by the usb-serial core for a device * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_device_type for this device + * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device * @minor: the starting minor number for this device * @num_ports: the number of ports this device has @@ -159,7 +159,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void */ struct usb_serial { struct usb_device * dev; - struct usb_serial_device_type * type; + struct usb_serial_driver * type; struct usb_interface * interface; unsigned char minor; unsigned char num_ports; @@ -188,11 +188,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) } /** - * usb_serial_device_type - a structure that defines a usb serial device - * @owner: pointer to the module that owns this device. - * @name: pointer to a string that describes this device. This string used + * usb_serial_driver - describes a usb serial driver + * @owner: pointer to the module that owns this driver. + * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this device in + * @short_name: a pointer to a string that describes this driver in * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all @@ -221,13 +221,13 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * @shutdown: pointer to the driver's shutdown function. This will be * called when the device is removed from the system. * - * This structure is defines a USB Serial device. It provides all of + * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. */ -struct usb_serial_device_type { +struct usb_serial_driver { struct module *owner; char *name; char *short_name; @@ -269,10 +269,10 @@ struct usb_serial_device_type { void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); }; -#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver) +#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) -extern int usb_serial_register(struct usb_serial_device_type *new_device); -extern void usb_serial_deregister(struct usb_serial_device_type *device); +extern int usb_serial_register(struct usb_serial_driver *driver); +extern void usb_serial_deregister(struct usb_serial_driver *driver); extern void usb_serial_port_softint(void *private); extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); @@ -303,10 +303,10 @@ extern void usb_serial_generic_shutdown (struct usb_serial *serial); extern int usb_serial_generic_register (int debug); extern void usb_serial_generic_deregister (void); -extern int usb_serial_bus_register (struct usb_serial_device_type *device); -extern void usb_serial_bus_deregister (struct usb_serial_device_type *device); +extern int usb_serial_bus_register (struct usb_serial_driver *device); +extern void usb_serial_bus_deregister (struct usb_serial_driver *device); -extern struct usb_serial_device_type usb_serial_generic_device; +extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 31c57adcb623..825451b3788c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -311,7 +311,7 @@ static struct usb_driver visor_driver = { }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ -static struct usb_serial_device_type handspring_device = { +static struct usb_serial_driver handspring_device = { .owner = THIS_MODULE, .name = "Handspring Visor / Palm OS", .short_name = "visor", @@ -339,7 +339,7 @@ static struct usb_serial_device_type handspring_device = { }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ -static struct usb_serial_device_type clie_5_device = { +static struct usb_serial_driver clie_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 5.0", .short_name = "clie_5", @@ -367,7 +367,7 @@ static struct usb_serial_device_type clie_5_device = { }; /* device info for the Sony Clie OS version 3.5 */ -static struct usb_serial_device_type clie_3_5_device = { +static struct usb_serial_driver clie_3_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 3.5", .short_name = "clie_3.5", diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index cf3bc30675a1..dc06664bfa0e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -156,7 +156,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port); static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); -static struct usb_serial_device_type whiteheat_fake_device = { +static struct usb_serial_driver whiteheat_fake_device = { .owner = THIS_MODULE, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", @@ -169,7 +169,7 @@ static struct usb_serial_device_type whiteheat_fake_device = { .attach = whiteheat_firmware_attach, }; -static struct usb_serial_device_type whiteheat_device = { +static struct usb_serial_driver whiteheat_device = { .owner = THIS_MODULE, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", -- cgit v1.2.3 From 18fcac353fdc7cd072b0d24c8667042e675a4c11 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 4 +++- drivers/usb/serial/belkin_sa.c | 4 +++- drivers/usb/serial/bus.c | 9 ++++----- drivers/usb/serial/cp2101.c | 4 +++- drivers/usb/serial/cyberjack.c | 4 +++- drivers/usb/serial/cypress_m8.c | 8 ++++++-- drivers/usb/serial/digi_acceleport.c | 8 ++++++-- drivers/usb/serial/empeg.c | 4 +++- drivers/usb/serial/ftdi_sio.c | 4 +++- drivers/usb/serial/garmin_gps.c | 4 +++- drivers/usb/serial/generic.c | 4 +++- drivers/usb/serial/hp4x.c | 4 +++- drivers/usb/serial/io_tables.h | 12 +++++++++--- drivers/usb/serial/io_ti.c | 8 ++++++-- drivers/usb/serial/ipaq.c | 4 +++- drivers/usb/serial/ipw.c | 4 +++- drivers/usb/serial/ir-usb.c | 4 +++- drivers/usb/serial/keyspan.h | 16 ++++++++++++---- drivers/usb/serial/keyspan_pda.c | 12 +++++++++--- drivers/usb/serial/kl5kusb105.c | 4 +++- drivers/usb/serial/kobil_sct.c | 4 +++- drivers/usb/serial/mct_u232.c | 4 +++- drivers/usb/serial/omninet.c | 4 +++- drivers/usb/serial/option.c | 4 +++- drivers/usb/serial/pl2303.c | 4 +++- drivers/usb/serial/safe_serial.c | 4 +++- drivers/usb/serial/ti_usb_3410_5052.c | 8 ++++++-- drivers/usb/serial/usb-serial.c | 22 +++++++++++----------- drivers/usb/serial/usb-serial.h | 5 +++-- drivers/usb/serial/visor.c | 12 +++++++++--- drivers/usb/serial/whiteheat.c | 8 ++++++-- 31 files changed, 144 insertions(+), 60 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 104c04385bb9..fbc5b9b44749 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -31,7 +31,9 @@ static struct usb_driver airprime_driver = { }; static struct usb_serial_driver airprime_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6d84de40cb7b..4878961a0900 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -122,7 +122,9 @@ static struct usb_driver belkin_driver = { /* All of the device info needed for the serial converters */ static struct usb_serial_driver belkin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", .id_table = id_table_combined, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 5a0bcd34bb6d..b8364a8de7df 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev) driver = port->serial->type; if (driver->port_probe) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_probe (port); - module_put(driver->owner); + module_put(driver->driver.owner); if (retval) goto exit; } @@ -92,13 +92,13 @@ static int usb_serial_device_remove (struct device *dev) driver = port->serial->type; if (driver->port_remove) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_remove (port); - module_put(driver->owner); + module_put(driver->driver.owner); } exit: minor = port->number; @@ -120,7 +120,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; - driver->driver.owner = driver->owner; retval = driver_register(&driver->driver); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 0b45b58bef5f..81dd720a122b 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -74,7 +74,9 @@ static struct usb_driver cp2101_driver = { }; static struct usb_serial_driver cp2101_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 9f421a3c47e8..3441bad74f7b 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -84,7 +84,9 @@ static struct usb_driver cyberjack_driver = { }; static struct usb_serial_driver cyberjack_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", .id_table = id_table, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4fb8e59d1527..b4069af4d565 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -177,7 +177,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "DeLorme Earthmate USB", .short_name = "earthmate", .id_table = id_table_earthmate, @@ -204,7 +206,9 @@ static struct usb_serial_driver cypress_earthmate_device = { }; static struct usb_serial_driver cypress_hidcom_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", .id_table = id_table_cyphidcomrs232, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 66feb88b4316..be9b495d2491 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -504,7 +504,9 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ static struct usb_serial_driver digi_acceleport_2_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 2 port USB adapter", .short_name = "digi_2", .id_table = id_table_2, @@ -531,7 +533,9 @@ static struct usb_serial_driver digi_acceleport_2_device = { }; static struct usb_serial_driver digi_acceleport_4_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 4 port USB adapter", .short_name = "digi_4", .id_table = id_table_4, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cbea8b38b60e..3e6c4ba7667b 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -113,7 +113,9 @@ static struct usb_driver empeg_driver = { }; static struct usb_serial_driver empeg_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 529e1a7ccfa0..9d945de0acac 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -563,7 +563,9 @@ static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", .id_table = id_table_combined, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 7361194f1d66..3fd98c00cd6a 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1470,7 +1470,9 @@ static void garmin_shutdown (struct usb_serial *serial) /* All of the device info needed */ static struct usb_serial_driver garmin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", .id_table = id_table, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 7f567bf96549..779bea0c6242 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -37,7 +37,9 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Generic", .short_name = "generic", .id_table = generic_device_ids, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index b49469907a87..4f3cbc08c4ee 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -45,7 +45,9 @@ static struct usb_driver hp49gp_driver = { }; static struct usb_serial_driver hp49gp_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 7314c04727fe..28fb0d42a166 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -76,7 +76,9 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", .id_table = edgeport_2port_id_table, @@ -104,7 +106,9 @@ static struct usb_serial_driver edgeport_2port_device = { }; static struct usb_serial_driver edgeport_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", .id_table = edgeport_4port_id_table, @@ -132,7 +136,9 @@ static struct usb_serial_driver edgeport_4port_device = { }; static struct usb_serial_driver edgeport_8port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", .id_table = edgeport_8port_id_table, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4328cc702ef7..74228a072643 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2983,7 +2983,9 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", .id_table = edgeport_1port_id_table, @@ -3011,7 +3013,9 @@ static struct usb_serial_driver edgeport_1port_device = { }; static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", .id_table = edgeport_2port_id_table, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9a79ad8d7a5f..9aedfb91b20c 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -548,7 +548,9 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ static struct usb_serial_driver ipaq_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 04524d34de3b..2ba69623ac05 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -444,7 +444,9 @@ static int ipw_disconnect(struct usb_serial_port *port) } static struct usb_serial_driver ipw_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IPWireless converter", .short_name = "ipw", .id_table = usb_ipw_ids, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ecfb2060ea0f..bf079059819e 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -134,7 +134,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 97e7d9e53e39..124d46e76a2e 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -571,7 +571,9 @@ static struct usb_device_id keyspan_4port_ids[] = { /* Structs for the devices, pre and post renumeration. */ static struct usb_serial_driver keyspan_pre_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", .id_table = keyspan_pre_ids, @@ -583,7 +585,9 @@ static struct usb_serial_driver keyspan_pre_device = { }; static struct usb_serial_driver keyspan_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", .id_table = keyspan_1port_ids, @@ -608,7 +612,9 @@ static struct usb_serial_driver keyspan_1port_device = { }; static struct usb_serial_driver keyspan_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", .id_table = keyspan_2port_ids, @@ -633,7 +639,9 @@ static struct usb_serial_driver keyspan_2port_device = { }; static struct usb_serial_driver keyspan_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", .id_table = keyspan_4port_ids, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 8fad0e963dd3..389b7833e3ae 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -784,7 +784,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) #ifdef KEYSPAN static struct usb_serial_driver keyspan_pda_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", .id_table = id_table_fake, @@ -798,7 +800,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { #ifdef XIRCOM static struct usb_serial_driver xircom_pgs_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", .id_table = id_table_fake_xircom, @@ -811,7 +815,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { #endif static struct usb_serial_driver keyspan_pda_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA", .short_name = "keyspan_pda", .id_table = id_table_std, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index be082706b952..586108ce7897 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -124,7 +124,9 @@ static struct usb_driver kl5kusb105d_driver = { }; static struct usb_serial_driver kl5kusb105d_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", .id_table = id_table, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 94944340bb8d..a9578e05b22f 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -106,7 +106,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 9470964316a7..7dcf91c5f83d 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -133,7 +133,9 @@ static struct usb_driver mct_u232_driver = { }; static struct usb_serial_driver mct_u232_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "MCT U232", .short_name = "mct_u232", .id_table = id_table_combined, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 53c0588877c0..f6327cc1b2e7 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -89,7 +89,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", .id_table = id_table, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6ec9266e2e96..a2b5adf34868 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -106,7 +106,9 @@ static struct usb_driver option_driver = { * recognizes separately, thus num_port=1. */ static struct usb_serial_driver option_3port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Option 3G data card", .short_name = "option", .id_table = option_ids, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7134648e078d..beef3c4cee6e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -176,7 +176,9 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ static struct usb_serial_driver pl2303_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 87871bb647df..42a86ab689f4 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -398,7 +398,9 @@ static int safe_startup (struct usb_serial *serial) } static struct usb_serial_driver safe_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f2efaf6f3d76..eab8a6de0925 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -256,7 +256,9 @@ static struct usb_driver ti_usb_driver = { }; static struct usb_serial_driver ti_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, @@ -283,7 +285,9 @@ static struct usb_serial_driver ti_1port_device = { }; static struct usb_serial_driver ti_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf083da15eb4..08f600327db4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -507,7 +507,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ - if (!try_module_get(serial->type->owner)) { + if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; goto bailout_kref_put; } @@ -522,7 +522,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) return 0; bailout_module_put: - module_put(serial->type->owner); + module_put(serial->type->driver.owner); bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; @@ -553,7 +553,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) port->tty = NULL; } - module_put(port->serial->type->owner); + module_put(port->serial->type->driver.owner); } kref_put(&port->serial->kref, destroy_serial); @@ -718,8 +718,8 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int continue; length += sprintf (page+length, "%d:", i); - if (serial->type->owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); + if (serial->type->driver.owner) + length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); length += sprintf (page+length, " name:\"%s\"", serial->type->name); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), @@ -900,7 +900,7 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; @@ -908,7 +908,7 @@ int usb_serial_probe(struct usb_interface *interface, id = usb_match_id(interface, type->id_table); retval = type->probe(serial, id); - module_put(type->owner); + module_put(type->driver.owner); if (retval) { dbg ("sub driver rejected device"); @@ -1007,13 +1007,13 @@ int usb_serial_probe(struct usb_interface *interface, if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; } num_ports = type->calc_num_ports (serial); - module_put(type->owner); + module_put(type->driver.owner); } if (!num_ports) num_ports = type->num_ports; @@ -1158,12 +1158,12 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); goto probe_error; } retval = type->attach (serial); - module_put(type->owner); + module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index d6738b1b0429..4ca5e0c05611 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -189,7 +189,6 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @owner: pointer to the module that owns this driver. * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. * @short_name: a pointer to a string that describes this driver in @@ -226,9 +225,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * */ struct usb_serial_driver { - struct module *owner; char *name; char *short_name; const struct usb_device_id *id_table; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 825451b3788c..0ac0377e8683 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -312,7 +312,9 @@ static struct usb_driver visor_driver = { /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Handspring Visor / Palm OS", .short_name = "visor", .id_table = id_table, @@ -340,7 +342,9 @@ static struct usb_serial_driver handspring_device = { /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ static struct usb_serial_driver clie_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 5.0", .short_name = "clie_5", .id_table = clie_id_5_table, @@ -368,7 +372,9 @@ static struct usb_serial_driver clie_5_device = { /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_driver clie_3_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 3.5", .short_name = "clie_3.5", .id_table = clie_id_3_5_table, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index dc06664bfa0e..fb95a34a1cf7 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -157,7 +157,9 @@ static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", .id_table = id_table_prerenumeration, @@ -170,7 +172,9 @@ static struct usb_serial_driver whiteheat_fake_device = { }; static struct usb_serial_driver whiteheat_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", .id_table = id_table_std, -- cgit v1.2.3 From 502b95c1cc9e2c855a26f90fc999c5211b8ba957 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: move old changelog comments out of source code Create a new file just for these things, as they just get in the way in the source files. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ChangeLog.old | 730 +++++++++++++++++++++++++++++++++++++++ drivers/usb/serial/io_edgeport.c | 219 ------------ drivers/usb/serial/pl2303.c | 23 +- drivers/usb/serial/usb-serial.c | 309 +---------------- drivers/usb/serial/usb-serial.h | 44 +-- drivers/usb/serial/visor.c | 131 +------ 6 files changed, 736 insertions(+), 720 deletions(-) create mode 100644 drivers/usb/serial/ChangeLog.old (limited to 'drivers') diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old new file mode 100644 index 000000000000..c1b279939bbf --- /dev/null +++ b/drivers/usb/serial/ChangeLog.old @@ -0,0 +1,730 @@ +This is the contents of some of the drivers/usb/serial/ files that had old +changelog comments. They were quite old, and out of date, and we don't keep +them anymore, so I've put them here, away from the source files, in case +people still care to see them. + +- Greg Kroah-Hartman October 20, 2005 + +----------------------------------------------------------------------- +usb-serial.h Change Log comments: + + (03/26/2002) gkh + removed the port->tty check from port_paranoia_check() due to serial + consoles not having a tty device assigned to them. + + (12/03/2001) gkh + removed active from the port structure. + added documentation to the usb_serial_device_type structure + + (10/10/2001) gkh + added vendor and product to serial structure. Needed to determine device + owner when the device is disconnected. + + (05/30/2001) gkh + added sem to port structure and removed port_lock + + (10/05/2000) gkh + Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help + fix bug with urb->dev not being set properly, now that the usb core + needs it. + + (09/11/2000) gkh + Added usb_serial_debug_data function to help get rid of #DEBUG in the + drivers. + + (08/28/2000) gkh + Added port_lock to port structure. + + (08/08/2000) gkh + Added open_count to port structure. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + +----------------------------------------------------------------------- +usb-serial.c Change Log comments: + + (12/10/2002) gkh + Split the ports off into their own struct device, and added a + usb-serial bus driver. + + (11/19/2002) gkh + removed a few #ifdefs for the generic code and cleaned up the failure + logic in initialization. + + (10/02/2002) gkh + moved the console code to console.c and out of this file. + + (06/05/2002) gkh + moved location of startup() call in serial_probe() until after all + of the port information and endpoints are initialized. This makes + things easier for some drivers. + + (04/10/2002) gkh + added serial_read_proc function which creates a + /proc/tty/driver/usb-serial file. + + (03/27/2002) gkh + Got USB serial console code working properly and merged into the main + version of the tree. Thanks to Randy Dunlap for the initial version + of this code, and for pushing me to finish it up. + The USB serial console works with any usb serial driver device. + + (03/21/2002) gkh + Moved all manipulation of port->open_count into the core. Now the + individual driver's open and close functions are called only when the + first open() and last close() is called. Making the drivers a bit + smaller and simpler. + Fixed a bug if a driver didn't have the owner field set. + + (02/26/2002) gkh + Moved all locking into the main serial_* functions, instead of having + the individual drivers have to grab the port semaphore. This should + reduce races. + Reworked the MOD_INC logic a bit to always increment and decrement, even + if the generic driver is being used. + + (10/10/2001) gkh + usb_serial_disconnect() now sets the serial->dev pointer is to NULL to + help prevent child drivers from accessing the device since it is now + gone. + + (09/13/2001) gkh + Moved generic driver initialize after we have registered with the USB + core. Thanks to Randy Dunlap for pointing this problem out. + + (07/03/2001) gkh + Fixed module paramater size. Thanks to John Brockmeyer for the pointer. + Fixed vendor and product getting defined through the MODULE_PARM macro + if the Generic driver wasn't compiled in. + Fixed problem with generic_shutdown() not being called for drivers that + don't have a shutdown() function. + + (06/06/2001) gkh + added evil hack that is needed for the prolific pl2303 device due to the + crazy way its endpoints are set up. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (04/08/2001) gb + Identify version on module load. + + 2001_02_05 gkh + Fixed buffer overflows bug with the generic serial driver. Thanks to + Todd Squires for fixing this. + + (01/10/2001) gkh + Fixed bug where the generic serial adaptor grabbed _any_ device that was + offered to it. + + (12/12/2000) gkh + Removed MOD_INC and MOD_DEC from poll and disconnect functions, and + moved them to the serial_open and serial_close functions. + Also fixed bug with there not being a MOD_DEC for the generic driver + (thanks to Gary Brubaker for finding this.) + + (11/29/2000) gkh + Small NULL pointer initialization cleanup which saves a bit of disk image + + (11/01/2000) Adam J. Richter + instead of using idVendor/idProduct pairs, usb serial drivers + now identify their hardware interest with usb_device_id tables, + which they usually have anyhow for use with MODULE_DEVICE_TABLE. + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (08/28/2000) gkh + Added port_lock to port structure. + Added locks for SMP safeness to generic driver + Fixed the ability to open a generic device's port more than once. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + + (07/03/2000) gkh + Added more debugging to serial_ioctl call + + (06/25/2000) gkh + Changed generic_write_bulk_callback to not call wake_up_interruptible + directly, but to have port_softint do it at a safer time. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (05/22/2000) gkh + Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be + removed from the individual device source files. + + (05/03/2000) gkh + Added the Digi Acceleport driver from Al Borchers and Peter Berger. + + (05/02/2000) gkh + Changed devfs and tty register code to work properly now. This was based on + the ACM driver changes by Vojtech Pavlik. + + (04/27/2000) Ryan VanderBijl + Put calls to *_paranoia_checks into one function. + + (04/23/2000) gkh + Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. + Moved when the startup code printed out the devices that are supported. + + (04/19/2000) gkh + Added driver for ZyXEL omni.net lcd plus ISDN TA + Made startup info message specify which drivers were compiled in. + + (04/03/2000) gkh + Changed the probe process to remove the module unload races. + Changed where the tty layer gets initialized to have devfs work nicer. + Added initial devfs support. + + (03/26/2000) gkh + Split driver up into device specific pieces. + + (03/19/2000) gkh + Fixed oops that could happen when device was removed while a program + was talking to the device. + Removed the static urbs and now all urbs are created and destroyed + dynamically. + Reworked the internal interface. Now everything is based on the + usb_serial_port structure instead of the larger usb_serial structure. + This fixes the bug that a multiport device could not have more than + one port open at one time. + + (03/17/2000) gkh + Added config option for debugging messages. + Added patch for keyspan pda from Brian Warner. + + (03/06/2000) gkh + Added the keyspan pda code from Brian Warner + Moved a bunch of the port specific stuff into its own structure. This + is in anticipation of the true multiport devices (there's a bug if you + try to access more than one port of any multiport device right now) + + (02/21/2000) gkh + Made it so that any serial devices only have to specify which functions + they want to overload from the generic function calls (great, + inheritance in C, in a driver, just what I wanted...) + Added support for set_termios and ioctl function calls. No drivers take + advantage of this yet. + Removed the #ifdef MODULE, now there is no module specific code. + Cleaned up a few comments in usb-serial.h that were wrong (thanks again + to Miles Lott). + Small fix to get_free_serial. + + (02/14/2000) gkh + Removed the Belkin and Peracom functionality from the driver due to + the lack of support from the vendor, and me not wanting people to + accidenatly buy the device, expecting it to work with Linux. + Added read_bulk_callback and write_bulk_callback to the type structure + for the needs of the FTDI and WhiteHEAT driver. + Changed all reverences to FTDI to FTDI_SIO at the request of Bill + Ryder. + Changed the output urb size back to the max endpoint size to make + the ftdi_sio driver have it easier, and due to the fact that it didn't + really increase the speed any. + + (02/11/2000) gkh + Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a + patch from Miles Lott (milos@insync.net). + Fixed bug with not restoring the minor range that a device grabs, if + the startup function fails (thanks Miles for finding this). + + (02/05/2000) gkh + Added initial framework for the Keyspan PDA serial converter so that + Brian Warner has a place to put his code. + Made the ezusb specific functions generic enough that different + devices can use them (whiteheat and keyspan_pda both need them). + Split out a whole bunch of structure and other stuff to a separate + usb-serial.h file. + Made the Visor connection messages a little more understandable, now + that Miles Lott (milos@insync.net) has gotten the Generic channel to + work. Also made them always show up in the log file. + + (01/25/2000) gkh + Added initial framework for FTDI serial converter so that Bill Ryder + has a place to put his code. + Added the vendor specific info from Handspring. Now we can print out + informational debug messages as well as understand what is happening. + + (01/23/2000) gkh + Fixed problem of crash when trying to open a port that didn't have a + device assigned to it. Made the minor node finding a little smarter, + now it looks to find a continuous space for the new device. + + (01/21/2000) gkh + Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) + Fixed get_serial_by_minor which was all messed up for multi port + devices. Fixed multi port problem for generic devices. Now the number + of ports is determined by the number of bulk out endpoints for the + generic device. + + (01/19/2000) gkh + Removed lots of cruft that was around from the old (pre urb) driver + interface. + Made the serial_table dynamic. This should save lots of memory when + the number of minor nodes goes up to 256. + Added initial support for devices that have more than one port. + Added more debugging comments for the Visor, and added a needed + set_configuration call. + + (01/17/2000) gkh + Fixed the WhiteHEAT firmware (my processing tool had a bug) + and added new debug loader firmware for it. + Removed the put_char function as it isn't really needed. + Added visor startup commands as found by the Win98 dump. + + (01/13/2000) gkh + Fixed the vendor id for the generic driver to the one I meant it to be. + + (01/12/2000) gkh + Forget the version numbering...that's pretty useless... + Made the driver able to be compiled so that the user can select which + converter they want to use. This allows people who only want the Visor + support to not pay the memory size price of the WhiteHEAT. + Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) + grabbed the root hub. Not good. + + version 0.4.0 (01/10/2000) gkh + Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT + device. Added startup function to allow firmware to be downloaded to + a device if it needs to be. + Added firmware download logic to the WhiteHEAT device. + Started to add #defines to split up the different drivers for potential + configuration option. + + version 0.3.1 (12/30/99) gkh + Fixed problems with urb for bulk out. + Added initial support for multiple sets of endpoints. This enables + the Handspring Visor to be attached successfully. Only the first + bulk in / bulk out endpoint pair is being used right now. + + version 0.3.0 (12/27/99) gkh + Added initial support for the Handspring Visor based on a patch from + Miles Lott (milos@sneety.insync.net) + Cleaned up the code a bunch and converted over to using urbs only. + + version 0.2.3 (12/21/99) gkh + Added initial support for the Connect Tech WhiteHEAT converter. + Incremented the number of ports in expectation of getting the + WhiteHEAT to work properly (4 ports per connection). + Added notification on insertion and removal of what port the + device is/was connected to (and what kind of device it was). + + version 0.2.2 (12/16/99) gkh + Changed major number to the new allocated number. We're legal now! + + version 0.2.1 (12/14/99) gkh + Fixed bug that happens when device node is opened when there isn't a + device attached to it. Thanks to marek@webdesign.no for noticing this. + + version 0.2.0 (11/10/99) gkh + Split up internals to make it easier to add different types of serial + converters to the code. + Added a "generic" driver that gets it's vendor and product id + from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) + for the idea and sample code (from the usb scanner driver.) + Cleared up any licensing questions by releasing it under the GNU GPL. + + version 0.1.2 (10/25/99) gkh + Fixed bug in detecting device. + + version 0.1.1 (10/05/99) gkh + Changed the major number to not conflict with anything else. + + version 0.1 (09/28/99) gkh + Can recognize the two different devices and start up a read from + device when asked to. Writes also work. No control signals yet, this + all is vendor specific data (i.e. no spec), also no control for + different baud rates or other bit settings. + Currently we are using the same devid as the acm driver. This needs + to change. + +----------------------------------------------------------------------- +visor.c Change Log comments: + + (06/03/2003) Judd Montgomery + Added support for module parameter options for untested/unknown + devices. + + (03/09/2003) gkh + Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl + for the information. + + (03/05/2003) gkh + Think Treo support is now working. + + (04/03/2002) gkh + Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI + for the information. + + (03/27/2002) gkh + Removed assumptions that port->tty was always valid (is not true + for usb serial console devices.) + + (03/23/2002) gkh + Added support for the Palm i705 device, thanks to Thomas Riemer + for the information. + + (03/21/2002) gkh + Added support for the Palm m130 device, thanks to Udo Eisenbarth + for the information. + + (02/27/2002) gkh + Reworked the urb handling logic. We have no more pool, but dynamically + allocate the urb and the transfer buffer on the fly. In testing this + does not incure any measurable overhead. This also relies on the fact + that we have proper reference counting logic for urbs. + + (02/21/2002) SilaS + Added initial support for the Palm m515 devices. + + (02/14/2002) gkh + Added support for the Clie S-360 device. + + (12/18/2001) gkh + Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand + for the patch. + + (11/11/2001) gkh + Added support for the m125 devices, and added check to prevent oopses + for Clié devices that lie about the number of ports they have. + + (08/30/2001) gkh + Added support for the Clie devices, both the 3.5 and 4.0 os versions. + Many thanks to Daniel Burke, and Bryan Payne for helping with this. + + (08/23/2001) gkh + fixed a few potential bugs pointed out by Oliver Neukum. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (05/28/2000) gkh + Added initial support for the Palm m500 and Palm m505 devices. + + (04/08/2001) gb + Identify version on module load. + + (01/21/2000) gkh + Added write_room and chars_in_buffer, as they were previously using the + generic driver versions which is all wrong now that we are using an urb + pool. Thanks to Wolfgang Grandegger for pointing this out to me. + Removed count assignment in the write function, which was not needed anymore + either. Thanks to Al Borchers for pointing this out. + + (12/12/2000) gkh + Moved MOD_DEC to end of visor_close to be nicer, as the final write + message can sleep. + + (11/12/2000) gkh + Fixed bug with data being dropped on the floor by forcing tty->low_latency + to be on. Hopefully this fixes the OHCI issue! + + (11/01/2000) Adam J. Richter + usb_device_id table support + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Got rid of always calling kmalloc for every urb we wrote out to the + device. + Added visor_read_callback so we can keep track of bytes in and out for + those people who like to know the speed of their device. + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (09/06/2000) gkh + Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ + the host controller drivers set urb->dev = NULL when the urb is finished. + + (08/28/2000) gkh + Added locks for SMP safeness. + + (08/08/2000) gkh + Fixed endian problem in visor_startup. + Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + than once. + + (07/23/2000) gkh + Added pool of write urbs to speed up transfers to the visor. + + (07/19/2000) gkh + Added module_init and module_exit functions to handle the fact that this + driver is a loadable module now. + + (07/03/2000) gkh + Added visor_set_ioctl and visor_set_termios functions (they don't do much + of anything, but are good for debugging.) + + (06/25/2000) gkh + Fixed bug in visor_unthrottle that should help with the disconnect in PPP + bug that people have been reporting. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (04/27/2000) Ryan VanderBijl + Fixed memory leak in visor_close + + (03/26/2000) gkh + Split driver up into device specific pieces. + +----------------------------------------------------------------------- +pl2303.c Change Log comments: + + 2002_Mar_26 gkh + allowed driver to work properly if there is no tty assigned to a port + (this happens for serial console devices.) + + 2001_Oct_06 gkh + Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. + + 2001_Sep_19 gkh + Added break support. + + 2001_Aug_30 gkh + fixed oops in write_bulk_callback. + + 2001_Aug_28 gkh + reworked buffer logic to be like other usb-serial drivers. Hopefully + removing some reported problems. + + 2001_Jun_06 gkh + finished porting to 2.4 format. + + +----------------------------------------------------------------------- +io_edgeport.c Change Log comments: + + 2003_04_03 al borchers + - fixed a bug (that shows up with dosemu) where the tty struct is + used in a callback after it has been freed + + 2.3 2002_03_08 greg kroah-hartman + - fixed bug when multiple devices were attached at the same time. + + 2.2 2001_11_14 greg kroah-hartman + - fixed bug in edge_close that kept the port from being used more + than once. + - fixed memory leak on device removal. + - fixed potential double free of memory when command urb submitting + failed. + - other small cleanups when the device is removed + + 2.1 2001_07_09 greg kroah-hartman + - added support for TIOCMBIS and TIOCMBIC. + + (04/08/2001) gb + - Identify version on module load. + + 2.0 2001_03_05 greg kroah-hartman + - reworked entire driver to fit properly in with the other usb-serial + drivers. Occasional oopses still happen, but it's a good start. + + 1.2.3 (02/23/2001) greg kroah-hartman + - changed device table to work properly for 2.4.x final format. + - fixed problem with dropping data at high data rates. + + 1.2.2 (11/27/2000) greg kroah-hartman + - cleaned up more NTisms. + - Added device table for 2.4.0-test11 + + 1.2.1 (11/08/2000) greg kroah-hartman + - Started to clean up NTisms. + - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 + + 1.2 (10/17/2000) David Iacovelli + Remove all EPIC code and GPL source + Fix RELEVANT_IFLAG macro to include flow control + changes port configuration changes. + Fix redefinition of SERIAL_MAGIC + Change all timeout values to 5 seconds + Tried to fix the UHCI multiple urb submission, but failed miserably. + it seems to work fine with OHCI. + ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must + find a way to work arount this UHCI bug ) + + 1.1 (10/11/2000) David Iacovelli + Fix XON/XOFF flow control to support both IXON and IXOFF + + 0.9.27 (06/30/2000) David Iacovelli + Added transmit queue and now allocate urb for command writes. + + 0.9.26 (06/29/2000) David Iacovelli + Add support for 80251 based edgeport + + 0.9.25 (06/27/2000) David Iacovelli + Do not close the port if it has multiple opens. + + 0.9.24 (05/26/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + and first cut at running BlackBox Demo + + 0.9.23 (05/24/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + + 0.9.22 (05/23/2000) David Iacovelli + fixed bug in enumeration. If epconfig turns on mapping by + path after a device is already plugged in, we now update + the mapping correctly + + 0.9.21 (05/16/2000) David Iacovelli + Added BlockUntilChaseResp() to also wait for txcredits + Updated the way we allocate and handle write URBs + Add debug code to dump buffers + + 0.9.20 (05/01/2000) David Iacovelli + change driver to use usb/tts/ + + 0.9.19 (05/01/2000) David Iacovelli + Update code to compile if DEBUG is off + + 0.9.18 (04/28/2000) David Iacovelli + cleanup and test tty_register with devfs + + 0.9.17 (04/27/2000) greg kroah-hartman + changed tty_register around to be like the way it + was before, but now it works properly with devfs. + + 0.9.16 (04/26/2000) david iacovelli + Fixed bug in GetProductInfo() + + 0.9.15 (04/25/2000) david iacovelli + Updated enumeration + + 0.9.14 (04/24/2000) david iacovelli + Removed all config/status IOCTLS and + converted to using /proc/edgeport + still playing with devfs + + 0.9.13 (04/24/2000) david iacovelli + Removed configuration based on ttyUSB0 + Added support for configuration using /prod/edgeport + first attempt at using devfs (not working yet!) + Added IOCTL to GetProductInfo() + Added support for custom baud rates + Add support for random port numbers + + 0.9.12 (04/18/2000) david iacovelli + added additional configuration IOCTLs + use ttyUSB0 for configuration + + 0.9.11 (04/17/2000) greg kroah-hartman + fixed module initialization race conditions. + made all urbs dynamically allocated. + made driver devfs compatible. now it only registers the tty device + when the device is actually plugged in. + + 0.9.10 (04/13/2000) greg kroah-hartman + added proc interface framework. + + 0.9.9 (04/13/2000) david iacovelli + added enumeration code and ioctls to configure the device + + 0.9.8 (04/12/2000) david iacovelli + Change interrupt read start when device is plugged in + and stop when device is removed + process interrupt reads when all ports are closed + (keep value of rxBytesAvail consistent with the edgeport) + set the USB_BULK_QUEUE flag so that we can shove a bunch + of urbs at once down the pipe + + 0.9.7 (04/10/2000) david iacovelli + start to add enumeration code. + generate serial number for epic devices + add support for kdb + + 0.9.6 (03/30/2000) david iacovelli + add IOCTL to get string, manufacture, and boot descriptors + + 0.9.5 (03/14/2000) greg kroah-hartman + more error checking added to SerialOpen to try to fix UHCI open problem + + 0.9.4 (03/09/2000) greg kroah-hartman + added more error checking to handle oops when data is hanging + around and tty is abruptly closed. + + 0.9.3 (03/09/2000) david iacovelli + Add epic support for xon/xoff chars + play with performance + + 0.9.2 (03/08/2000) greg kroah-hartman + changed most "info" calls to "dbg" + implemented flow control properly in the termios call + + 0.9.1 (03/08/2000) david iacovelli + added EPIC support + enabled bootloader update + + 0.9 (03/08/2000) greg kroah-hartman + Release to IO networks. + Integrated changes that David made + made getting urbs for writing SMP safe + + 0.8 (03/07/2000) greg kroah-hartman + Release to IO networks. + Fixed problems that were seen in code by David. + Now both Edgeport/4 and Edgeport/2 works properly. + Changed most of the functions to use port instead of serial. + + 0.7 (02/27/2000) greg kroah-hartman + Milestone 3 release. + Release to IO Networks + ioctl for waiting on line change implemented. + ioctl for getting statistics implemented. + multiport support working. + lsr and msr registers are now handled properly. + change break now hooked up and working. + support for all known Edgeport devices. + + 0.6 (02/22/2000) greg kroah-hartman + Release to IO networks. + CHASE is implemented correctly when port is closed. + SerialOpen now blocks correctly until port is fully opened. + + 0.5 (02/20/2000) greg kroah-hartman + Release to IO networks. + Known problems: + modem status register changes are not sent on to the user + CHASE is not implemented when the port is closed. + + 0.4 (02/16/2000) greg kroah-hartman + Second cut at the CeBit demo. + Doesn't leak memory on every write to the port + Still small leaks on startup. + Added support for Edgeport/2 and Edgeport/8 + + 0.3 (02/15/2000) greg kroah-hartman + CeBit demo release. + Force the line settings to 4800, 8, 1, e for the demo. + Warning! This version leaks memory like crazy! + + 0.2 (01/30/2000) greg kroah-hartman + Milestone 1 release. + Device is found by USB subsystem, enumerated, fimware is downloaded + and the descriptors are printed to the debug log, config is set, and + green light starts to blink. Open port works, and data can be sent + and received at the default settings of the UART. Loopback connector + and debug log confirms this. + + 0.1 (01/23/2000) greg kroah-hartman + Initial release to help IO Networks try to set up their test system. + Edgeport4 is recognized, firmware is downloaded, config is set so + device blinks green light every 3 sec. Port is bound, but opening, + closing, and sending data do not work properly. + + diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 04bfe279d763..dc4c498bd1ed 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -27,225 +27,6 @@ * Networks technical support, or Peter Berger , * or Al Borchers . * - * Version history: - * - * 2003_04_03 al borchers - * - fixed a bug (that shows up with dosemu) where the tty struct is - * used in a callback after it has been freed - * - * 2.3 2002_03_08 greg kroah-hartman - * - fixed bug when multiple devices were attached at the same time. - * - * 2.2 2001_11_14 greg kroah-hartman - * - fixed bug in edge_close that kept the port from being used more - * than once. - * - fixed memory leak on device removal. - * - fixed potential double free of memory when command urb submitting - * failed. - * - other small cleanups when the device is removed - * - * 2.1 2001_07_09 greg kroah-hartman - * - added support for TIOCMBIS and TIOCMBIC. - * - * (04/08/2001) gb - * - Identify version on module load. - * - * 2.0 2001_03_05 greg kroah-hartman - * - reworked entire driver to fit properly in with the other usb-serial - * drivers. Occasional oopses still happen, but it's a good start. - * - * 1.2.3 (02/23/2001) greg kroah-hartman - * - changed device table to work properly for 2.4.x final format. - * - fixed problem with dropping data at high data rates. - * - * 1.2.2 (11/27/2000) greg kroah-hartman - * - cleaned up more NTisms. - * - Added device table for 2.4.0-test11 - * - * 1.2.1 (11/08/2000) greg kroah-hartman - * - Started to clean up NTisms. - * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - * - * 1.2 (10/17/2000) David Iacovelli - * Remove all EPIC code and GPL source - * Fix RELEVANT_IFLAG macro to include flow control - * changes port configuration changes. - * Fix redefinition of SERIAL_MAGIC - * Change all timeout values to 5 seconds - * Tried to fix the UHCI multiple urb submission, but failed miserably. - * it seems to work fine with OHCI. - * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - * find a way to work arount this UHCI bug ) - * - * 1.1 (10/11/2000) David Iacovelli - * Fix XON/XOFF flow control to support both IXON and IXOFF - * - * 0.9.27 (06/30/2000) David Iacovelli - * Added transmit queue and now allocate urb for command writes. - * - * 0.9.26 (06/29/2000) David Iacovelli - * Add support for 80251 based edgeport - * - * 0.9.25 (06/27/2000) David Iacovelli - * Do not close the port if it has multiple opens. - * - * 0.9.24 (05/26/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * and first cut at running BlackBox Demo - * - * 0.9.23 (05/24/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * - * 0.9.22 (05/23/2000) David Iacovelli - * fixed bug in enumeration. If epconfig turns on mapping by - * path after a device is already plugged in, we now update - * the mapping correctly - * - * 0.9.21 (05/16/2000) David Iacovelli - * Added BlockUntilChaseResp() to also wait for txcredits - * Updated the way we allocate and handle write URBs - * Add debug code to dump buffers - * - * 0.9.20 (05/01/2000) David Iacovelli - * change driver to use usb/tts/ - * - * 0.9.19 (05/01/2000) David Iacovelli - * Update code to compile if DEBUG is off - * - * 0.9.18 (04/28/2000) David Iacovelli - * cleanup and test tty_register with devfs - * - * 0.9.17 (04/27/2000) greg kroah-hartman - * changed tty_register around to be like the way it - * was before, but now it works properly with devfs. - * - * 0.9.16 (04/26/2000) david iacovelli - * Fixed bug in GetProductInfo() - * - * 0.9.15 (04/25/2000) david iacovelli - * Updated enumeration - * - * 0.9.14 (04/24/2000) david iacovelli - * Removed all config/status IOCTLS and - * converted to using /proc/edgeport - * still playing with devfs - * - * 0.9.13 (04/24/2000) david iacovelli - * Removed configuration based on ttyUSB0 - * Added support for configuration using /prod/edgeport - * first attempt at using devfs (not working yet!) - * Added IOCTL to GetProductInfo() - * Added support for custom baud rates - * Add support for random port numbers - * - * 0.9.12 (04/18/2000) david iacovelli - * added additional configuration IOCTLs - * use ttyUSB0 for configuration - * - * 0.9.11 (04/17/2000) greg kroah-hartman - * fixed module initialization race conditions. - * made all urbs dynamically allocated. - * made driver devfs compatible. now it only registers the tty device - * when the device is actually plugged in. - * - * 0.9.10 (04/13/2000) greg kroah-hartman - * added proc interface framework. - * - * 0.9.9 (04/13/2000) david iacovelli - * added enumeration code and ioctls to configure the device - * - * 0.9.8 (04/12/2000) david iacovelli - * Change interrupt read start when device is plugged in - * and stop when device is removed - * process interrupt reads when all ports are closed - * (keep value of rxBytesAvail consistent with the edgeport) - * set the USB_BULK_QUEUE flag so that we can shove a bunch - * of urbs at once down the pipe - * - * 0.9.7 (04/10/2000) david iacovelli - * start to add enumeration code. - * generate serial number for epic devices - * add support for kdb - * - * 0.9.6 (03/30/2000) david iacovelli - * add IOCTL to get string, manufacture, and boot descriptors - * - * 0.9.5 (03/14/2000) greg kroah-hartman - * more error checking added to SerialOpen to try to fix UHCI open problem - * - * 0.9.4 (03/09/2000) greg kroah-hartman - * added more error checking to handle oops when data is hanging - * around and tty is abruptly closed. - * - * 0.9.3 (03/09/2000) david iacovelli - * Add epic support for xon/xoff chars - * play with performance - * - * 0.9.2 (03/08/2000) greg kroah-hartman - * changed most "info" calls to "dbg" - * implemented flow control properly in the termios call - * - * 0.9.1 (03/08/2000) david iacovelli - * added EPIC support - * enabled bootloader update - * - * 0.9 (03/08/2000) greg kroah-hartman - * Release to IO networks. - * Integrated changes that David made - * made getting urbs for writing SMP safe - * - * 0.8 (03/07/2000) greg kroah-hartman - * Release to IO networks. - * Fixed problems that were seen in code by David. - * Now both Edgeport/4 and Edgeport/2 works properly. - * Changed most of the functions to use port instead of serial. - * - * 0.7 (02/27/2000) greg kroah-hartman - * Milestone 3 release. - * Release to IO Networks - * ioctl for waiting on line change implemented. - * ioctl for getting statistics implemented. - * multiport support working. - * lsr and msr registers are now handled properly. - * change break now hooked up and working. - * support for all known Edgeport devices. - * - * 0.6 (02/22/2000) greg kroah-hartman - * Release to IO networks. - * CHASE is implemented correctly when port is closed. - * SerialOpen now blocks correctly until port is fully opened. - * - * 0.5 (02/20/2000) greg kroah-hartman - * Release to IO networks. - * Known problems: - * modem status register changes are not sent on to the user - * CHASE is not implemented when the port is closed. - * - * 0.4 (02/16/2000) greg kroah-hartman - * Second cut at the CeBit demo. - * Doesn't leak memory on every write to the port - * Still small leaks on startup. - * Added support for Edgeport/2 and Edgeport/8 - * - * 0.3 (02/15/2000) greg kroah-hartman - * CeBit demo release. - * Force the line settings to 4800, 8, 1, e for the demo. - * Warning! This version leaks memory like crazy! - * - * 0.2 (01/30/2000) greg kroah-hartman - * Milestone 1 release. - * Device is found by USB subsystem, enumerated, fimware is downloaded - * and the descriptors are printed to the debug log, config is set, and - * green light starts to blink. Open port works, and data can be sent - * and received at the default settings of the UART. Loopback connector - * and debug log confirms this. - * - * 0.1 (01/23/2000) greg kroah-hartman - * Initial release to help IO Networks try to set up their test system. - * Edgeport4 is recognized, firmware is downloaded, config is set so - * device blinks green light every 3 sec. Port is bound, but opening, - * closing, and sending data do not work properly. - * */ #include diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index beef3c4cee6e..29719ceab19a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -8,31 +8,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * 2002_Mar_26 gkh - * allowed driver to work properly if there is no tty assigned to a port - * (this happens for serial console devices.) - * - * 2001_Oct_06 gkh - * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - * - * 2001_Sep_19 gkh - * Added break support. - * - * 2001_Aug_30 gkh - * fixed oops in write_bulk_callback. - * - * 2001_Aug_28 gkh - * reworked buffer logic to be like other usb-serial drivers. Hopefully - * removing some reported problems. - * - * 2001_Jun_06 gkh - * finished porting to 2.4 format. - * */ #include diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 08f600327db4..fde09fba8790 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,7 +1,7 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) * @@ -9,316 +9,11 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * This driver was originally based on the ACM driver by Armin Fuerst (which was + * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (12/10/2002) gkh - * Split the ports off into their own struct device, and added a - * usb-serial bus driver. - * - * (11/19/2002) gkh - * removed a few #ifdefs for the generic code and cleaned up the failure - * logic in initialization. - * - * (10/02/2002) gkh - * moved the console code to console.c and out of this file. - * - * (06/05/2002) gkh - * moved location of startup() call in serial_probe() until after all - * of the port information and endpoints are initialized. This makes - * things easier for some drivers. - * - * (04/10/2002) gkh - * added serial_read_proc function which creates a - * /proc/tty/driver/usb-serial file. - * - * (03/27/2002) gkh - * Got USB serial console code working properly and merged into the main - * version of the tree. Thanks to Randy Dunlap for the initial version - * of this code, and for pushing me to finish it up. - * The USB serial console works with any usb serial driver device. - * - * (03/21/2002) gkh - * Moved all manipulation of port->open_count into the core. Now the - * individual driver's open and close functions are called only when the - * first open() and last close() is called. Making the drivers a bit - * smaller and simpler. - * Fixed a bug if a driver didn't have the owner field set. - * - * (02/26/2002) gkh - * Moved all locking into the main serial_* functions, instead of having - * the individual drivers have to grab the port semaphore. This should - * reduce races. - * Reworked the MOD_INC logic a bit to always increment and decrement, even - * if the generic driver is being used. - * - * (10/10/2001) gkh - * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - * help prevent child drivers from accessing the device since it is now - * gone. - * - * (09/13/2001) gkh - * Moved generic driver initialize after we have registered with the USB - * core. Thanks to Randy Dunlap for pointing this problem out. - * - * (07/03/2001) gkh - * Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - * Fixed vendor and product getting defined through the MODULE_PARM macro - * if the Generic driver wasn't compiled in. - * Fixed problem with generic_shutdown() not being called for drivers that - * don't have a shutdown() function. - * - * (06/06/2001) gkh - * added evil hack that is needed for the prolific pl2303 device due to the - * crazy way its endpoints are set up. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_02_05 gkh - * Fixed buffer overflows bug with the generic serial driver. Thanks to - * Todd Squires for fixing this. - * - * (01/10/2001) gkh - * Fixed bug where the generic serial adaptor grabbed _any_ device that was - * offered to it. - * - * (12/12/2000) gkh - * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - * moved them to the serial_open and serial_close functions. - * Also fixed bug with there not being a MOD_DEC for the generic driver - * (thanks to Gary Brubaker for finding this.) - * - * (11/29/2000) gkh - * Small NULL pointer initialization cleanup which saves a bit of disk image - * - * (11/01/2000) Adam J. Richter - * instead of using idVendor/idProduct pairs, usb serial drivers - * now identify their hardware interest with usb_device_id tables, - * which they usually have anyhow for use with MODULE_DEVICE_TABLE. - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * Added locks for SMP safeness to generic driver - * Fixed the ability to open a generic device's port more than once. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * (07/03/2000) gkh - * Added more debugging to serial_ioctl call - * - * (06/25/2000) gkh - * Changed generic_write_bulk_callback to not call wake_up_interruptible - * directly, but to have port_softint do it at a safer time. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (05/22/2000) gkh - * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - * removed from the individual device source files. - * - * (05/03/2000) gkh - * Added the Digi Acceleport driver from Al Borchers and Peter Berger. - * - * (05/02/2000) gkh - * Changed devfs and tty register code to work properly now. This was based on - * the ACM driver changes by Vojtech Pavlik. - * - * (04/27/2000) Ryan VanderBijl - * Put calls to *_paranoia_checks into one function. - * - * (04/23/2000) gkh - * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - * Moved when the startup code printed out the devices that are supported. - * - * (04/19/2000) gkh - * Added driver for ZyXEL omni.net lcd plus ISDN TA - * Made startup info message specify which drivers were compiled in. - * - * (04/03/2000) gkh - * Changed the probe process to remove the module unload races. - * Changed where the tty layer gets initialized to have devfs work nicer. - * Added initial devfs support. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * - * (03/19/2000) gkh - * Fixed oops that could happen when device was removed while a program - * was talking to the device. - * Removed the static urbs and now all urbs are created and destroyed - * dynamically. - * Reworked the internal interface. Now everything is based on the - * usb_serial_port structure instead of the larger usb_serial structure. - * This fixes the bug that a multiport device could not have more than - * one port open at one time. - * - * (03/17/2000) gkh - * Added config option for debugging messages. - * Added patch for keyspan pda from Brian Warner. - * - * (03/06/2000) gkh - * Added the keyspan pda code from Brian Warner - * Moved a bunch of the port specific stuff into its own structure. This - * is in anticipation of the true multiport devices (there's a bug if you - * try to access more than one port of any multiport device right now) - * - * (02/21/2000) gkh - * Made it so that any serial devices only have to specify which functions - * they want to overload from the generic function calls (great, - * inheritance in C, in a driver, just what I wanted...) - * Added support for set_termios and ioctl function calls. No drivers take - * advantage of this yet. - * Removed the #ifdef MODULE, now there is no module specific code. - * Cleaned up a few comments in usb-serial.h that were wrong (thanks again - * to Miles Lott). - * Small fix to get_free_serial. - * - * (02/14/2000) gkh - * Removed the Belkin and Peracom functionality from the driver due to - * the lack of support from the vendor, and me not wanting people to - * accidenatly buy the device, expecting it to work with Linux. - * Added read_bulk_callback and write_bulk_callback to the type structure - * for the needs of the FTDI and WhiteHEAT driver. - * Changed all reverences to FTDI to FTDI_SIO at the request of Bill - * Ryder. - * Changed the output urb size back to the max endpoint size to make - * the ftdi_sio driver have it easier, and due to the fact that it didn't - * really increase the speed any. - * - * (02/11/2000) gkh - * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - * patch from Miles Lott (milos@insync.net). - * Fixed bug with not restoring the minor range that a device grabs, if - * the startup function fails (thanks Miles for finding this). - * - * (02/05/2000) gkh - * Added initial framework for the Keyspan PDA serial converter so that - * Brian Warner has a place to put his code. - * Made the ezusb specific functions generic enough that different - * devices can use them (whiteheat and keyspan_pda both need them). - * Split out a whole bunch of structure and other stuff to a separate - * usb-serial.h file. - * Made the Visor connection messages a little more understandable, now - * that Miles Lott (milos@insync.net) has gotten the Generic channel to - * work. Also made them always show up in the log file. - * - * (01/25/2000) gkh - * Added initial framework for FTDI serial converter so that Bill Ryder - * has a place to put his code. - * Added the vendor specific info from Handspring. Now we can print out - * informational debug messages as well as understand what is happening. - * - * (01/23/2000) gkh - * Fixed problem of crash when trying to open a port that didn't have a - * device assigned to it. Made the minor node finding a little smarter, - * now it looks to find a continuous space for the new device. - * - * (01/21/2000) gkh - * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - * Fixed get_serial_by_minor which was all messed up for multi port - * devices. Fixed multi port problem for generic devices. Now the number - * of ports is determined by the number of bulk out endpoints for the - * generic device. - * - * (01/19/2000) gkh - * Removed lots of cruft that was around from the old (pre urb) driver - * interface. - * Made the serial_table dynamic. This should save lots of memory when - * the number of minor nodes goes up to 256. - * Added initial support for devices that have more than one port. - * Added more debugging comments for the Visor, and added a needed - * set_configuration call. - * - * (01/17/2000) gkh - * Fixed the WhiteHEAT firmware (my processing tool had a bug) - * and added new debug loader firmware for it. - * Removed the put_char function as it isn't really needed. - * Added visor startup commands as found by the Win98 dump. - * - * (01/13/2000) gkh - * Fixed the vendor id for the generic driver to the one I meant it to be. - * - * (01/12/2000) gkh - * Forget the version numbering...that's pretty useless... - * Made the driver able to be compiled so that the user can select which - * converter they want to use. This allows people who only want the Visor - * support to not pay the memory size price of the WhiteHEAT. - * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - * grabbed the root hub. Not good. - * - * version 0.4.0 (01/10/2000) gkh - * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - * device. Added startup function to allow firmware to be downloaded to - * a device if it needs to be. - * Added firmware download logic to the WhiteHEAT device. - * Started to add #defines to split up the different drivers for potential - * configuration option. - * - * version 0.3.1 (12/30/99) gkh - * Fixed problems with urb for bulk out. - * Added initial support for multiple sets of endpoints. This enables - * the Handspring Visor to be attached successfully. Only the first - * bulk in / bulk out endpoint pair is being used right now. - * - * version 0.3.0 (12/27/99) gkh - * Added initial support for the Handspring Visor based on a patch from - * Miles Lott (milos@sneety.insync.net) - * Cleaned up the code a bunch and converted over to using urbs only. - * - * version 0.2.3 (12/21/99) gkh - * Added initial support for the Connect Tech WhiteHEAT converter. - * Incremented the number of ports in expectation of getting the - * WhiteHEAT to work properly (4 ports per connection). - * Added notification on insertion and removal of what port the - * device is/was connected to (and what kind of device it was). - * - * version 0.2.2 (12/16/99) gkh - * Changed major number to the new allocated number. We're legal now! - * - * version 0.2.1 (12/14/99) gkh - * Fixed bug that happens when device node is opened when there isn't a - * device attached to it. Thanks to marek@webdesign.no for noticing this. - * - * version 0.2.0 (11/10/99) gkh - * Split up internals to make it easier to add different types of serial - * converters to the code. - * Added a "generic" driver that gets it's vendor and product id - * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - * for the idea and sample code (from the usb scanner driver.) - * Cleared up any licensing questions by releasing it under the GNU GPL. - * - * version 0.1.2 (10/25/99) gkh - * Fixed bug in detecting device. - * - * version 0.1.1 (10/05/99) gkh - * Changed the major number to not conflict with anything else. - * - * version 0.1 (09/28/99) gkh - * Can recognize the two different devices and start up a read from - * device when asked to. Writes also work. No control signals yet, this - * all is vendor specific data (i.e. no spec), also no control for - * different baud rates or other bit settings. - * Currently we are using the same devid as the acm driver. This needs - * to change. - * */ #include diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 4ca5e0c05611..1cedc1999508 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -1,53 +1,13 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 + * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * - * (03/26/2002) gkh - * removed the port->tty check from port_paranoia_check() due to serial - * consoles not having a tty device assigned to them. - * - * (12/03/2001) gkh - * removed active from the port structure. - * added documentation to the usb_serial_device_type structure - * - * (10/10/2001) gkh - * added vendor and product to serial structure. Needed to determine device - * owner when the device is disconnected. - * - * (05/30/2001) gkh - * added sem to port structure and removed port_lock - * - * (10/05/2000) gkh - * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - * fix bug with urb->dev not being set properly, now that the usb core - * needs it. - * - * (09/11/2000) gkh - * Added usb_serial_debug_data function to help get rid of #DEBUG in the - * drivers. - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * - * (08/08/2000) gkh - * Added open_count to port structure. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * */ diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 0ac0377e8683..39ad0cab8635 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -7,139 +7,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (06/03/2003) Judd Montgomery - * Added support for module parameter options for untested/unknown - * devices. - * - * (03/09/2003) gkh - * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - * for the information. - * - * (03/05/2003) gkh - * Think Treo support is now working. - * - * (04/03/2002) gkh - * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - * for the information. - * - * (03/27/2002) gkh - * Removed assumptions that port->tty was always valid (is not true - * for usb serial console devices.) - * - * (03/23/2002) gkh - * Added support for the Palm i705 device, thanks to Thomas Riemer - * for the information. - * - * (03/21/2002) gkh - * Added support for the Palm m130 device, thanks to Udo Eisenbarth - * for the information. - * - * (02/27/2002) gkh - * Reworked the urb handling logic. We have no more pool, but dynamically - * allocate the urb and the transfer buffer on the fly. In testing this - * does not incure any measurable overhead. This also relies on the fact - * that we have proper reference counting logic for urbs. - * - * (02/21/2002) SilaS - * Added initial support for the Palm m515 devices. - * - * (02/14/2002) gkh - * Added support for the Clie S-360 device. - * - * (12/18/2001) gkh - * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - * for the patch. - * - * (11/11/2001) gkh - * Added support for the m125 devices, and added check to prevent oopses - * for Clié devices that lie about the number of ports they have. - * - * (08/30/2001) gkh - * Added support for the Clie devices, both the 3.5 and 4.0 os versions. - * Many thanks to Daniel Burke, and Bryan Payne for helping with this. - * - * (08/23/2001) gkh - * fixed a few potential bugs pointed out by Oliver Neukum. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (05/28/2000) gkh - * Added initial support for the Palm m500 and Palm m505 devices. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/21/2000) gkh - * Added write_room and chars_in_buffer, as they were previously using the - * generic driver versions which is all wrong now that we are using an urb - * pool. Thanks to Wolfgang Grandegger for pointing this out to me. - * Removed count assignment in the write function, which was not needed anymore - * either. Thanks to Al Borchers for pointing this out. - * - * (12/12/2000) gkh - * Moved MOD_DEC to end of visor_close to be nicer, as the final write - * message can sleep. - * - * (11/12/2000) gkh - * Fixed bug with data being dropped on the floor by forcing tty->low_latency - * to be on. Hopefully this fixes the OHCI issue! - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Got rid of always calling kmalloc for every urb we wrote out to the - * device. - * Added visor_read_callback so we can keep track of bytes in and out for - * those people who like to know the speed of their device. - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (09/06/2000) gkh - * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - * the host controller drivers set urb->dev = NULL when the urb is finished. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * - * (08/08/2000) gkh - * Fixed endian problem in visor_startup. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/23/2000) gkh - * Added pool of write urbs to speed up transfers to the visor. - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (07/03/2000) gkh - * Added visor_set_ioctl and visor_set_termios functions (they don't do much - * of anything, but are good for debugging.) - * - * (06/25/2000) gkh - * Fixed bug in visor_unthrottle that should help with the disconnect in PPP - * bug that people have been reporting. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (04/27/2000) Ryan VanderBijl - * Fixed memory leak in visor_close - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include -- cgit v1.2.3 From 269bda1c123c7caf88e1deb2264f9086f0344192 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: move name to driver structure This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 4 ++-- drivers/usb/serial/bus.c | 8 ++------ drivers/usb/serial/cp2101.c | 4 ++-- drivers/usb/serial/cyberjack.c | 4 ++-- drivers/usb/serial/cypress_m8.c | 8 ++++---- drivers/usb/serial/digi_acceleport.c | 12 ++++++------ drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/garmin_gps.c | 4 ++-- drivers/usb/serial/generic.c | 3 +-- drivers/usb/serial/hp4x.c | 4 ++-- drivers/usb/serial/io_tables.h | 12 ++++++------ drivers/usb/serial/io_ti.c | 12 ++++++------ drivers/usb/serial/ipaq.c | 3 ++- drivers/usb/serial/ipw.c | 4 ++-- drivers/usb/serial/ir-usb.c | 3 ++- drivers/usb/serial/keyspan.h | 16 ++++++++-------- drivers/usb/serial/keyspan_pda.c | 12 ++++++------ drivers/usb/serial/kl5kusb105.c | 4 ++-- drivers/usb/serial/kobil_sct.c | 3 ++- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/omninet.c | 4 ++-- drivers/usb/serial/option.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 10 ++++++---- drivers/usb/serial/usb-serial.c | 15 +++++++++------ drivers/usb/serial/usb-serial.h | 12 +++++------- drivers/usb/serial/visor.c | 18 +++++++++--------- drivers/usb/serial/whiteheat.c | 30 +++++++++++++++--------------- 31 files changed, 115 insertions(+), 114 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index fbc5b9b44749..1f29d8837327 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -33,8 +33,8 @@ static struct usb_driver airprime_driver = { static struct usb_serial_driver airprime_device = { .driver = { .owner = THIS_MODULE, + .name = "airprime", }, - .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 4878961a0900..84bc0ee4f061 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -124,9 +124,9 @@ static struct usb_driver belkin_driver = { static struct usb_serial_driver belkin_device = { .driver = { .owner = THIS_MODULE, + .name = "belkin", }, - .name = "Belkin / Peracom / GoHubs USB Serial Adapter", - .short_name = "belkin", + .description = "Belkin / Peracom / GoHubs USB Serial Adapter", .id_table = id_table_combined, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index b8364a8de7df..664139afcfa9 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev) tty_register_device (usb_serial_tty_driver, minor, dev); dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", - driver->name, minor); + driver->description, minor); exit: return retval; @@ -104,7 +104,7 @@ exit: minor = port->number; tty_unregister_device (usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", - driver->name, minor); + driver->description, minor); return retval; } @@ -113,10 +113,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (driver->short_name) - driver->driver.name = (char *)driver->short_name; - else - driver->driver.name = (char *)driver->name; driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 81dd720a122b..c5334dd89b12 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,7 +67,7 @@ MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { .owner = THIS_MODULE, - .name = "CP2101", + .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -76,8 +76,8 @@ static struct usb_driver cp2101_driver = { static struct usb_serial_driver cp2101_device = { .driver = { .owner = THIS_MODULE, + .name = "cp2101", }, - .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 3441bad74f7b..e581e4ae8483 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -86,9 +86,9 @@ static struct usb_driver cyberjack_driver = { static struct usb_serial_driver cyberjack_device = { .driver = { .owner = THIS_MODULE, + .name = "cyberjack", }, - .name = "Reiner SCT Cyberjack USB card reader", - .short_name = "cyberjack", + .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b4069af4d565..af9290ed257b 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -179,9 +179,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { .driver = { .owner = THIS_MODULE, + .name = "earthmate", }, - .name = "DeLorme Earthmate USB", - .short_name = "earthmate", + .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -208,9 +208,9 @@ static struct usb_serial_driver cypress_earthmate_device = { static struct usb_serial_driver cypress_hidcom_device = { .driver = { .owner = THIS_MODULE, + .name = "cyphidcom", }, - .name = "HID->COM RS232 Adapter", - .short_name = "cyphidcom", + .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_interrupt_in = 1, .num_interrupt_out = 1, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index be9b495d2491..dc74644a603d 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -505,10 +505,10 @@ static struct usb_driver digi_driver = { static struct usb_serial_driver digi_acceleport_2_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_2", }, - .name = "Digi 2 port USB adapter", - .short_name = "digi_2", + .description = "Digi 2 port USB adapter", .id_table = id_table_2, .num_interrupt_in = 0, .num_bulk_in = 4, @@ -534,10 +534,10 @@ static struct usb_serial_driver digi_acceleport_2_device = { static struct usb_serial_driver digi_acceleport_4_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_4", }, - .name = "Digi 4 port USB adapter", - .short_name = "digi_4", + .description = "Digi 4 port USB adapter", .id_table = id_table_4, .num_interrupt_in = 0, .num_bulk_in = 5, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 3e6c4ba7667b..0b0546dcc7b9 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -115,8 +115,8 @@ static struct usb_driver empeg_driver = { static struct usb_serial_driver empeg_device = { .driver = { .owner = THIS_MODULE, + .name = "empeg", }, - .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9d945de0acac..77d54ac39a0e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -565,9 +565,9 @@ static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { .owner = THIS_MODULE, + .name = "ftdi_sio", }, - .name = "FTDI USB Serial Device", - .short_name = "ftdi_sio", + .description = "FTDI USB Serial Device", .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3fd98c00cd6a..35820bda7ae1 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1472,9 +1472,9 @@ static void garmin_shutdown (struct usb_serial *serial) static struct usb_serial_driver garmin_device = { .driver = { .owner = THIS_MODULE, + .name = "garmin_gps", }, - .name = "Garmin GPS usb/tty", - .short_name = "garmin_gps", + .description = "Garmin GPS usb/tty", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 779bea0c6242..8909208f506a 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -39,9 +39,8 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ struct usb_serial_driver usb_serial_generic_device = { .driver = { .owner = THIS_MODULE, + .name = "generic", }, - .name = "Generic", - .short_name = "generic", .id_table = generic_device_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 4f3cbc08c4ee..8eadfb705601 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,7 +38,7 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .owner = THIS_MODULE, - .name = "HP4X", + .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -47,8 +47,8 @@ static struct usb_driver hp49gp_driver = { static struct usb_serial_driver hp49gp_device = { .driver = { .owner = THIS_MODULE, + .name = "hp4X", }, - .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 28fb0d42a166..fad561c04c76 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_2", }, - .name = "Edgeport 2 port adapter", - .short_name = "edgeport_2", + .description = "Edgeport 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -108,9 +108,9 @@ static struct usb_serial_driver edgeport_2port_device = { static struct usb_serial_driver edgeport_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_4", }, - .name = "Edgeport 4 port adapter", - .short_name = "edgeport_4", + .description = "Edgeport 4 port adapter", .id_table = edgeport_4port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -138,9 +138,9 @@ static struct usb_serial_driver edgeport_4port_device = { static struct usb_serial_driver edgeport_8port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_8", }, - .name = "Edgeport 8 port adapter", - .short_name = "edgeport_8", + .description = "Edgeport 8 port adapter", .id_table = edgeport_8port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 74228a072643..832b6d6734c0 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2984,10 +2984,10 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_1", }, - .name = "Edgeport TI 1 port adapter", - .short_name = "edgeport_ti_1", + .description = "Edgeport TI 1 port adapter", .id_table = edgeport_1port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -3014,10 +3014,10 @@ static struct usb_serial_driver edgeport_1port_device = { static struct usb_serial_driver edgeport_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_2", }, - .name = "Edgeport TI 2 port adapter", - .short_name = "edgeport_ti_2", + .description = "Edgeport TI 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9aedfb91b20c..1abaebe6dbc1 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -550,8 +550,9 @@ static struct usb_driver ipaq_driver = { static struct usb_serial_driver ipaq_device = { .driver = { .owner = THIS_MODULE, + .name = "ipaq", }, - .name = "PocketPC PDA", + .description = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2ba69623ac05..a02fada85362 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -446,9 +446,9 @@ static int ipw_disconnect(struct usb_serial_port *port) static struct usb_serial_driver ipw_device = { .driver = { .owner = THIS_MODULE, + .name = "ipw", }, - .name = "IPWireless converter", - .short_name = "ipw", + .description = "IPWireless converter", .id_table = usb_ipw_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index bf079059819e..19f329e9bdcf 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -136,8 +136,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { .driver = { .owner = THIS_MODULE, + .name = "ir-usb", }, - .name = "IR Dongle", + .description = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 124d46e76a2e..5cfc13b5e56f 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -573,9 +573,9 @@ static struct usb_device_id keyspan_4port_ids[] = { static struct usb_serial_driver keyspan_pre_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_no_firm", }, - .name = "Keyspan - (without firmware)", - .short_name = "keyspan_no_firm", + .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -587,9 +587,9 @@ static struct usb_serial_driver keyspan_pre_device = { static struct usb_serial_driver keyspan_1port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_1", }, - .name = "Keyspan 1 port adapter", - .short_name = "keyspan_1", + .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -614,9 +614,9 @@ static struct usb_serial_driver keyspan_1port_device = { static struct usb_serial_driver keyspan_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_2", }, - .name = "Keyspan 2 port adapter", - .short_name = "keyspan_2", + .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -641,9 +641,9 @@ static struct usb_serial_driver keyspan_2port_device = { static struct usb_serial_driver keyspan_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_4", }, - .name = "Keyspan 4 port adapter", - .short_name = "keyspan_4", + .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 5, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 389b7833e3ae..cd4f48bd83b6 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -786,9 +786,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) static struct usb_serial_driver keyspan_pda_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda_pre", }, - .name = "Keyspan PDA - (prerenumeration)", - .short_name = "keyspan_pda_pre", + .description = "Keyspan PDA - (prerenumeration)", .id_table = id_table_fake, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -802,9 +802,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { static struct usb_serial_driver xircom_pgs_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "xircom_no_firm", }, - .name = "Xircom / Entregra PGS - (prerenumeration)", - .short_name = "xircom_no_firm", + .description = "Xircom / Entregra PGS - (prerenumeration)", .id_table = id_table_fake_xircom, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -817,9 +817,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { static struct usb_serial_driver keyspan_pda_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda", }, - .name = "Keyspan PDA", - .short_name = "keyspan_pda", + .description = "Keyspan PDA", .id_table = id_table_std, .num_interrupt_in = 1, .num_bulk_in = 0, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 586108ce7897..a8951c0fd020 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -126,9 +126,9 @@ static struct usb_driver kl5kusb105d_driver = { static struct usb_serial_driver kl5kusb105d_device = { .driver = { .owner = THIS_MODULE, + .name = "kl5kusb105d", }, - .name = "KL5KUSB105D / PalmConnect", - .short_name = "kl5kusb105d", + .description = "KL5KUSB105D / PalmConnect", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index a9578e05b22f..9456dd9dd136 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -108,8 +108,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { .driver = { .owner = THIS_MODULE, + .name = "kobil", }, - .name = "KOBIL USB smart card terminal", + .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 7dcf91c5f83d..ca5dbadb9b7e 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -135,9 +135,9 @@ static struct usb_driver mct_u232_driver = { static struct usb_serial_driver mct_u232_device = { .driver = { .owner = THIS_MODULE, + .name = "mct_u232", }, - .name = "MCT U232", - .short_name = "mct_u232", + .description = "MCT U232", .id_table = id_table_combined, .num_interrupt_in = 2, .num_bulk_in = 0, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6327cc1b2e7..3caf97072ac0 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -91,9 +91,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { .driver = { .owner = THIS_MODULE, + .name = "omninet", }, - .name = "ZyXEL - omni.net lcd plus usb", - .short_name = "omninet", + .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a2b5adf34868..7716000045b7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -108,9 +108,9 @@ static struct usb_driver option_driver = { static struct usb_serial_driver option_3port_device = { .driver = { .owner = THIS_MODULE, + .name = "option", }, - .name = "Option 3G data card", - .short_name = "option", + .description = "Option 3G data card", .id_table = option_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 29719ceab19a..f8f4e93e8c0b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -157,8 +157,8 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, static struct usb_serial_driver pl2303_device = { .driver = { .owner = THIS_MODULE, + .name = "pl2303", }, - .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 42a86ab689f4..c22bdc0c4dfd 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -400,8 +400,8 @@ static int safe_startup (struct usb_serial *serial) static struct usb_serial_driver safe_device = { .driver = { .owner = THIS_MODULE, + .name = "safe_serial", }, - .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index eab8a6de0925..205dbf7201da 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -257,9 +257,10 @@ static struct usb_driver ti_usb_driver = { static struct usb_serial_driver ti_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_1", }, - .name = "TI USB 3410 1 port adapter", + .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -286,9 +287,10 @@ static struct usb_serial_driver ti_1port_device = { static struct usb_serial_driver ti_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_2", }, - .name = "TI USB 5052 2 port adapter", + .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index fde09fba8790..13f6592be685 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -122,7 +122,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg ("%s - %s", __FUNCTION__, serial->type->name); + dbg("%s - %s", __FUNCTION__, serial->type->description); serial->type->shutdown(serial); @@ -415,7 +415,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int length += sprintf (page+length, "%d:", i); if (serial->type->driver.owner) length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); - length += sprintf (page+length, " name:\"%s\"", serial->type->name); + length += sprintf (page+length, " name:\"%s\"", serial->type->description); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), le16_to_cpu(serial->dev->descriptor.idProduct)); @@ -687,7 +687,7 @@ int usb_serial_probe(struct usb_interface *interface, #endif /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", type->name); + dev_info(&interface->dev, "%s converter detected\n", type->description); #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { @@ -1088,16 +1088,19 @@ int usb_serial_register(struct usb_serial_driver *driver) fixup_generic(driver); + if (!driver->description) + driver->description = driver->driver.name; + /* Add this device to our list of devices */ list_add(&driver->driver_list, &usb_serial_driver_list); retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, driver->name); + err("problem %d when registering driver %s", retval, driver->description); list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", driver->name); + info("USB Serial support registered for %s", driver->description); return retval; } @@ -1105,7 +1108,7 @@ int usb_serial_register(struct usb_serial_driver *driver) void usb_serial_deregister(struct usb_serial_driver *device) { - info("USB Serial deregistering driver %s", device->name); + info("USB Serial deregistering driver %s", device->description); list_del(&device->driver_list); usb_serial_bus_deregister(device); } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 1cedc1999508..238a5a871ed6 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -149,11 +149,8 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @name: pointer to a string that describes this driver. This string used + * @description: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this driver in - * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface - * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_interrupt_in: the number of interrupt in endpoints this device will @@ -187,11 +184,12 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * called, the generic serial function will be used instead. * * The driver.owner field should be set to the module owner of this driver. - * + * The driver.name field should be set to the name of this driver (remember + * it will show up in sysfs, so it needs to be short and to the point. + * Useing the module name is a good idea.) */ struct usb_serial_driver { - char *name; - char *short_name; + const char *description; const struct usb_device_id *id_table; char num_interrupt_in; char num_interrupt_out; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 39ad0cab8635..baa2acb28bd8 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -185,9 +185,9 @@ static struct usb_driver visor_driver = { static struct usb_serial_driver handspring_device = { .driver = { .owner = THIS_MODULE, + .name = "visor", }, - .name = "Handspring Visor / Palm OS", - .short_name = "visor", + .description = "Handspring Visor / Palm OS", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -215,9 +215,9 @@ static struct usb_serial_driver handspring_device = { static struct usb_serial_driver clie_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_5", }, - .name = "Sony Clie 5.0", - .short_name = "clie_5", + .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -245,9 +245,9 @@ static struct usb_serial_driver clie_5_device = { static struct usb_serial_driver clie_3_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_3.5", }, - .name = "Sony Clie 3.5", - .short_name = "clie_3.5", + .description = "Sony Clie 3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, @@ -659,7 +659,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i break; } dev_info(dev, "%s: port %d, is for %s use\n", - serial->type->name, + serial->type->description, connection_info->connections[i].port, string); } } @@ -668,11 +668,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", - serial->type->name); + serial->type->description); num_ports = 2; } - dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); /* diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index fb95a34a1cf7..18c3183be769 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -159,9 +159,9 @@ static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheatnofirm", }, - .name = "Connect Tech - WhiteHEAT - (prerenumeration)", - .short_name = "whiteheatnofirm", + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", .id_table = id_table_prerenumeration, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -174,9 +174,9 @@ static struct usb_serial_driver whiteheat_fake_device = { static struct usb_serial_driver whiteheat_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheat", }, - .name = "Connect Tech - WhiteHEAT", - .short_name = "whiteheat", + .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -386,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->name, ret); + err("%s: Couldn't send command [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(command)) { - err("%s: Send command incomplete [%d]", serial->type->name, alen); + err("%s: Send command incomplete [%d]", serial->type->description, alen); goto no_firmware; } @@ -398,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->name, ret); + err("%s: Couldn't get results [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(result)) { - err("%s: Get results incomplete [%d]", serial->type->name, alen); + err("%s: Get results incomplete [%d]", serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->name, result[0]); + err("%s: Command failed [%d]", serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; - info("%s: Driver %s: Firmware v%d.%02d", serial->type->name, + info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); for (i = 0; i < serial->num_ports; i++) { @@ -418,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial) info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_private; } @@ -488,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial) command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_command_private; } @@ -505,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name); - err("%s: please contact support@connecttech.com\n", serial->type->name); + err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); + err("%s: please contact support@connecttech.com\n", serial->type->description); return -ENODEV; no_command_private: -- cgit v1.2.3 From 17a882fc0c91477b2582a6dfd4ca93ae7eb58cd3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: remove driver version from a few drivers These numbers are pointless, as they have not been changed in _years_, so we should just remove them to stop pretending there is an actual "version number" for these drivers. This should also help reduce confusion when people try to ask for support of a specific driver version, as there has been no way to tell what they are talking about. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 4 +--- drivers/usb/serial/usb-serial.c | 6 ++---- drivers/usb/serial/visor.c | 3 +-- 3 files changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index f8f4e93e8c0b..165c119bf10e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -34,7 +34,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" static int debug; @@ -1176,7 +1175,7 @@ static int __init pl2303_init (void) retval = usb_register(&pl2303_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: usb_serial_deregister(&pl2303_device); @@ -1196,7 +1195,6 @@ module_init(pl2303_init); module_exit(pl2303_exit); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 13f6592be685..0c4881d18cd5 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -37,7 +37,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" @@ -406,7 +405,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int char tmp[40]; dbg("%s", __FUNCTION__); - length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); + length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); if (serial == NULL) @@ -1025,7 +1024,7 @@ static int __init usb_serial_init(void) goto exit_generic; } - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return result; @@ -1127,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint); /* Module information */ MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index baa2acb28bd8..a473c1c34559 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -32,7 +32,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" @@ -1002,7 +1001,7 @@ static int __init visor_init (void) retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: -- cgit v1.2.3 From 7521803dcc0137668bb30483383092a647671d8b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: always export interface information for modalias This fixes a problem with some cdc acm devices that were not getting automatically loaded as the module alias was not being reported properly. This check was for back in the days when we only reported hotplug events for the main usb device, not the interfaces. We should always give the interface information for MODALIAS/modalias as it can be needed. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 35 +++++++++++---------------- drivers/usb/core/usb.c | 63 ++++++++++++++++++------------------------------ 2 files changed, 37 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index eae413bf8c2a..4bdbc9df6e03 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -462,30 +462,23 @@ static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, { struct usb_interface *intf; struct usb_device *udev; - int len; + struct usb_host_interface *alt; intf = to_usb_interface(dev); udev = interface_to_usbdev(intf); - - len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - le16_to_cpu(udev->descriptor.bcdDevice), - udev->descriptor.bDeviceClass, - udev->descriptor.bDeviceSubClass, - udev->descriptor.bDeviceProtocol); - buf += len; - - if (udev->descriptor.bDeviceClass == 0) { - struct usb_host_interface *alt = intf->cur_altsetting; - - return len + sprintf(buf, "%02Xisc%02Xip%02X\n", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol); - } else { - return len + sprintf(buf, "*isc*ip*\n"); - } + alt = intf->cur_altsetting; + + return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X" + "ic%02Xisc%02Xip%02X\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + le16_to_cpu(udev->descriptor.bcdDevice), + udev->descriptor.bDeviceClass, + udev->descriptor.bDeviceSubClass, + udev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol); } static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2493e7d9f5b3..4eca4904938f 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -569,6 +569,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, { struct usb_interface *intf; struct usb_device *usb_dev; + struct usb_host_interface *alt; int i = 0; int length = 0; @@ -585,7 +586,8 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, intf = to_usb_interface(dev); usb_dev = interface_to_usbdev (intf); - + alt = intf->cur_altsetting; + if (usb_dev->devnum < 0) { pr_debug ("usb %s: already deleted?\n", dev->bus_id); return -ENODEV; @@ -627,46 +629,27 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, usb_dev->descriptor.bDeviceProtocol)) return -ENOMEM; - if (usb_dev->descriptor.bDeviceClass == 0) { - struct usb_host_interface *alt = intf->cur_altsetting; + if (add_hotplug_env_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "INTERFACE=%d/%d/%d", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; - /* 2.4 only exposed interface zero. in 2.5, hotplug - * agents are called for all interfaces, and can use - * $DEVPATH/bInterfaceNumber if necessary. - */ - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "INTERFACE=%d/%d/%d", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol, - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - } else { - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol)) - return -ENOMEM; - } + if (add_hotplug_env_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice), + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; envp[i] = NULL; -- cgit v1.2.3 From dcab4eaf77ccd8779c715da3c5db0a82874fa645 Mon Sep 17 00:00:00 2001 From: Simeon Simeonov Date: Wed, 19 Oct 2005 11:32:14 -0400 Subject: [PATCH] USB: storage patch for LEICA camera On Tue, 18 Oct 2005, Simeon Simeonov wrote: > Attached is a patch that solves mounting problems for > LEICA D-LUX camera with FC4 2.6.13 kernel. > > Let me know if you have some questions. Looks okay to me. Given that the previous entry uses the full 0000 - 9999 range, I guess this one can also. The vendor name is a little odd (it will give us three different vendor names all in entries with the same vendor ID) but that doesn't really matter either. Signed-off-by: Alan Stern Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a11701840262..d0f6a7e2fe31 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -251,6 +251,13 @@ UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), +/* Reported by Simeon Simeonov */ +UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, + "LEICA", + "D-LUX Camera", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), + /* Most of the following entries were developed with the help of * Shuttle/SCM directly. */ -- cgit v1.2.3 From 61eded6e06a1f4bdbf707b69da904ba9f3eb2f0a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 24 Oct 2005 22:37:20 +0200 Subject: [PATCH] USB: microtek patch to use kzalloc here is another one to use kzalloc. Please apply. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/image/microtek.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index c84e1486054f..c89d0769b3da 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -773,11 +773,10 @@ static int mts_usb_probe(struct usb_interface *intf, } - new_desc = kmalloc(sizeof(struct mts_desc), GFP_KERNEL); + new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL); if (!new_desc) goto out; - memset(new_desc, 0, sizeof(*new_desc)); new_desc->urb = usb_alloc_urb(0, GFP_KERNEL); if (!new_desc->urb) goto out_kfree; -- cgit v1.2.3 From f2d45cd976682a3566c8cf30cefe91eb43ab6005 Mon Sep 17 00:00:00 2001 From: Guillaume GOURAT / Date: Fri, 21 Oct 2005 14:01:35 +0200 Subject: [PATCH] USB: Kaweth.c udelay patch On some arch (like arm) udelay cannot be called with value greater that 2000. Signed-off-by: Guillaume GOURAT / guillaume.gourat@nexvision.fr Signed-off-by: Oliver Neukum --- drivers/usb/net/kaweth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index c82655d3d448..6bef1be6b36c 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -469,7 +469,7 @@ static int kaweth_reset(struct kaweth_device *kaweth) 0, KAWETH_CONTROL_TIMEOUT); - udelay(10000); + mdelay(10); kaweth_dbg("kaweth_reset() returns %d.",result); -- cgit v1.2.3 From eb3c5ed8617d0aa67648cb7d1a486d14099129f2 Mon Sep 17 00:00:00 2001 From: David Eriksson Date: Tue, 18 Oct 2005 20:12:24 +0200 Subject: [PATCH] USB: Improving the set of vendor/product IDs in the ipaq driver This is a patch improving the set of vendor/product IDs used in the "ipaq" USB serial device driver. The patch size is because I sorted the ids this time, forgot about that last time. Changes: - Added vendor/product identifiers for Psion Teklogix devices - Restored Microsoft's identifier pair 045e/00ce - Sorted list of vendor/product identifiers Signed-off-by: David Eriksson Signed-off-by: Ganesh Varadarajan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipaq.c | 238 +++++++++++++++++++++++----------------------- 1 file changed, 121 insertions(+), 117 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 1abaebe6dbc1..d5d066488100 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -92,24 +92,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port); static struct usb_device_id ipaq_id_table [] = { /* The first entry is a placeholder for the insmod-specified device */ { USB_DEVICE(0x049F, 0x0003) }, - { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ - { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ - { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ - { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ - { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ - { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ - { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ - { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */ @@ -125,7 +108,13 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */ { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */ { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */ - { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ + { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ + { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */ { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */ @@ -251,17 +240,81 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */ - { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ - { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ - { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ + { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ + { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ + { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ + { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ + { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ + { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ + { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ + { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ + { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ + { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ + { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ + { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ + { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ + { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ + { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ + { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ + { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ + { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ + { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ + { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ + { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ + { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ + { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ + { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ + { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ + { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ + { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ + { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ + { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ + { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ + { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ + { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */ { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */ + { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */ { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */ - { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */ { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */ { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */ + { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ + { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ + { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ + { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ + { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ + { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ + { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ @@ -422,116 +475,67 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */ - { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ - { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */ - { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ - { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ - { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ - { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */ - { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ - { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ - { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ + { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ + { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ + { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */ { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */ { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */ { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */ - { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ - { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ - { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ - { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ - { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ - { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ - { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ - { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ - { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ - { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ - { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ - { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ - { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */ + { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */ + { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */ + { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ + { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ + { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ + { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ + { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ + { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ + { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ + { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ + { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */ { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */ - { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ - { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */ - { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */ - { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ + { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ + { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ + { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ + { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */ + { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ + { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */ - { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ - { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ - { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ - { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ - { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ - { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ - { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ - { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ - { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ - { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ - { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ - { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ - { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ - { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ - { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ - { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ - { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ - { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ - { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ - { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ - { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ - { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ - { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ - { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ - { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ - { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ - { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ - { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ - { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ - { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ - { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ - { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ - { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ { } /* Terminating entry */ }; -- cgit v1.2.3 From 46f116eab81b21c6ae8c4f169498c632b1f94bf1 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 24 Oct 2005 22:42:35 +0200 Subject: [PATCH] USB: cdc-acm patch to use kzalloc another one to use kzalloc. Please apply. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 16ecad30e29c..1b4751412970 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -827,11 +827,10 @@ skip_normal_probe: return -ENODEV; } - if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (acm kmalloc)\n"); + if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { + dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); goto alloc_fail; } - memset(acm, 0, sizeof(struct acm)); ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); readsize = le16_to_cpu(epread->wMaxPacketSize); -- cgit v1.2.3 From 478a3bab8c87a9ba4a4ba338314e32bb0c378e62 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 19 Oct 2005 12:52:02 -0400 Subject: [PATCH] USB: Always do usb-handoff This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 2 -- drivers/usb/host/pci-quirks.c | 46 ++--------------------------- include/asm-i386/mach-summit/mach_mpparse.h | 3 -- include/linux/pci_ids.h | 3 ++ 4 files changed, 6 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 971589a9752d..90766b75d1b7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1517,8 +1517,6 @@ running once the system is up. uart6850= [HW,OSS] Format: , - usb-handoff [HW] Enable early USB BIOS -> OS handoff - usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index f7411ca48835..b7fd3f644e1e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -23,33 +23,6 @@ #include -/* - * PIIX3 USB: We have to disable USB interrupts that are - * hardwired to PIRQD# and may be shared with an - * external device. - * - * Legacy Support Register (LEGSUP): - * bit13: USB PIRQ Enable (USBPIRQDEN), - * bit4: Trap/SMI On IRQ Enable (USBSMIEN). - * - * We mask out all r/wc bits, too. - */ -static void __devinit quirk_piix3_usb(struct pci_dev *dev) -{ - u16 legsup; - - pci_read_config_word(dev, 0xc0, &legsup); - legsup &= 0x50ef; - pci_write_config_word(dev, 0xc0, legsup); -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); - - -/* FIXME these should be the guts of hcd->reset() methods; resolve all - * the differences between this version and the HCD's version. - */ - #define UHCI_USBLEGSUP 0xc0 /* legacy support */ #define UHCI_USBCMD 0 /* command register */ #define UHCI_USBINTR 4 /* interrupt register */ @@ -83,13 +56,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ -int usb_early_handoff __devinitdata = 0; -static int __init usb_handoff_early(char *str) -{ - usb_early_handoff = 1; - return 0; -} -__setup("usb-handoff", usb_handoff_early); /* * Make sure the controller is completely inactive, unable to @@ -320,17 +286,11 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) { - if (!usb_early_handoff) - return; - - if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ + if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ + else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) quirk_usb_handoff_ohci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ + else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI) quirk_usb_disable_ehci(pdev); - } - - return; } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h index 2b9e6d55bef1..1cce2b924a80 100644 --- a/include/asm-i386/mach-summit/mach_mpparse.h +++ b/include/asm-i386/mach-summit/mach_mpparse.h @@ -22,7 +22,6 @@ static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, { } -extern int usb_early_handoff; static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid) { @@ -32,7 +31,6 @@ static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, || !strncmp(productid, "RUTHLESS SMP", 12))){ use_cyclone = 1; /*enable cyclone-timer*/ setup_summit(); - usb_early_handoff = 1; return 1; } return 0; @@ -46,7 +44,6 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) || !strncmp(oem_table_id, "EXA", 3))){ use_cyclone = 1; /*enable cyclone-timer*/ setup_summit(); - usb_early_handoff = 1; return 1; } return 0; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7d300f7469e3..467a096c3b81 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -96,6 +96,9 @@ #define PCI_CLASS_SERIAL_ACCESS 0x0c01 #define PCI_CLASS_SERIAL_SSA 0x0c02 #define PCI_CLASS_SERIAL_USB 0x0c03 +#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 +#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 +#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 #define PCI_CLASS_SERIAL_FIBER 0x0c04 #define PCI_CLASS_SERIAL_SMBUS 0x0c05 -- cgit v1.2.3 From 423e489d704d05c6e8c2927fb1854db85914912a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 19 Oct 2005 13:06:13 -0400 Subject: [PATCH] hid-core: Add Clear-Halt on the Interrupt-in endpoint This patch (as577) adds a Clear-Halt call on the Interrupt-in endpoint during input device configuration. Without it my HP USB keyboard doesn't work. Vojtech says it's worth trying, since it might help with some recalcitrant devices. On the other hand, it might interfere with others. I'm submitting it so that it can get tested by a range of users. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index f7fcce731f54..79ddce4555ab 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1784,6 +1784,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) hid->urbctrl->transfer_dma = hid->ctrlbuf_dma; hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); + /* May be needed for some devices */ + usb_clear_halt(hid->dev, hid->urbin->pipe); + return hid; fail: -- cgit v1.2.3 From b876aef7f890d8c59a45b78858a36cf60fddf522 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:38:56 -0700 Subject: [PATCH] PATCH: usb-storage: move GetMaxLUN later in time This patch is originally from Alan Stern (as557). It has been re-diffed against a current tree, and I also corrected a minor merging error. Some time ago we introduced a delay before device scanning, because many devices do not like to receive SCSI commands right after enumeration. Now it turns out there's a device that doesn't like to receive Get-Max-LUN right after enumeration either. Accordingly this patch delays the Get-Max-LUN request until the beginning of the scanning procedure. This fixes Bugzilla entry #5010. Three things are worth noting. First, I removed the locking code from usb_stor_acquire_resources. It's not needed, because the locking is to protect against disconnect events and acquire_resources is only called during probe (so the disconnect routine can't be called). Second, I initialized to 0 the buffer used for the Get-Max-LUN response. It's not really necessary, but it will prevent random values from showing up in the debugging log when the request fails. Third, I added a test against the SINGLE_LUN flag. This will allow us to use the flag to indicate Bulk-only devices that can't handle Get-Max-LUN. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 1 + drivers/usb/storage/usb.c | 30 +++++++++++++----------------- 2 files changed, 14 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c1ba5301ebfc..e89e945fc4a7 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -923,6 +923,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us) int result; /* issue the command */ + us->iobuf[0] = 0; result = usb_stor_control_msg(us, us->recv_ctrl_pipe, US_BULK_GET_MAX_LUN, USB_DIR_IN | USB_TYPE_CLASS | diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5164900e40c1..92ee079d9172 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -747,25 +747,13 @@ static int usb_stor_acquire_resources(struct us_data *us) return -ENOMEM; } - /* Lock the device while we carry out the next two operations */ - down(&us->dev_semaphore); - - /* For bulk-only devices, determine the max LUN value */ - if (us->protocol == US_PR_BULK) { - p = usb_stor_Bulk_max_lun(us); - if (p < 0) { - up(&us->dev_semaphore); - return p; - } - us->max_lun = p; - } - /* Just before we start our control thread, initialize * the device if it needs initialization */ - if (us->unusual_dev->initFunction) - us->unusual_dev->initFunction(us); - - up(&us->dev_semaphore); + if (us->unusual_dev->initFunction) { + p = us->unusual_dev->initFunction(us); + if (p) + return p; + } /* Start up our control thread */ p = kernel_thread(usb_stor_control_thread, us, CLONE_VM); @@ -904,6 +892,14 @@ retry: /* If the device is still connected, perform the scanning */ if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == US_PR_BULK && + !(us->flags & US_FL_SINGLE_LUN)) { + down(&us->dev_semaphore); + us->max_lun = usb_stor_Bulk_max_lun(us); + up(&us->dev_semaphore); + } scsi_scan_host(us_to_host(us)); printk(KERN_DEBUG "usb-storage: device scan complete\n"); -- cgit v1.2.3 From bbafa4668f37f5093a3ae2a8b0cbe327e24e12da Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:40:22 -0700 Subject: [PATCH] PATCH: usb-storage: allocate separate sense buffer This patch is from Alan Stern (as560). It has been rediffed against a current tree. This patch allocates a separate buffer for usb-storage to use when auto-sensing. Up to now we have been using the sense buffer embedded in a scsi_cmnd struct, which is dangerous on hosts that (a) don't do cache-coherent DMA or (b) have DMA alignment restrictions. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 5 +++-- drivers/usb/storage/usb.c | 8 ++++++++ drivers/usb/storage/usb.h | 2 ++ 3 files changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index e89e945fc4a7..7ca896a342e3 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -636,11 +636,11 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* use the new buffer we have */ old_request_buffer = srb->request_buffer; - srb->request_buffer = srb->sense_buffer; + srb->request_buffer = us->sensebuf; /* set the buffer length for transfer */ old_request_bufflen = srb->request_bufflen; - srb->request_bufflen = 18; + srb->request_bufflen = US_SENSE_SIZE; /* set up for no scatter-gather use */ old_sg = srb->use_sg; @@ -652,6 +652,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) temp_result = us->transport(us->srb, us); /* let's clean up right away */ + memcpy(srb->sense_buffer, us->sensebuf, US_SENSE_SIZE); srb->resid = old_resid; srb->request_buffer = old_request_buffer; srb->request_bufflen = old_request_bufflen; diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 92ee079d9172..eb901817b7d2 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -467,6 +467,12 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf) US_DEBUGP("I/O buffer allocation failed\n"); return -ENOMEM; } + + us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL); + if (!us->sensebuf) { + US_DEBUGP("Sense buffer allocation failed\n"); + return -ENOMEM; + } return 0; } @@ -800,6 +806,8 @@ static void dissociate_dev(struct us_data *us) { US_DEBUGP("-- %s\n", __FUNCTION__); + kfree(us->sensebuf); + /* Free the device-related DMA-mapped buffers */ if (us->cr) usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr, diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index a195adae57b6..dfa4dc71dd3e 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -117,6 +117,7 @@ enum { US_DO_ALL_FLAGS }; */ #define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ +#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */ typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); typedef int (*trans_reset)(struct us_data*); @@ -168,6 +169,7 @@ struct us_data { struct usb_ctrlrequest *cr; /* control requests */ struct usb_sg_request current_sg; /* scatter-gather req. */ unsigned char *iobuf; /* I/O buffer */ + unsigned char *sensebuf; /* sense data buffer */ dma_addr_t cr_dma; /* buffer DMA addresses */ dma_addr_t iobuf_dma; -- cgit v1.2.3 From ce2596df79ddbac605a290f4c7cf011cb40524fc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:41:39 -0700 Subject: [PATCH] PATCH: usb-storage: implement minimal PM This patch from Alan Stern started as as568. It has been rediffed against a current tree. This patch adds minimal suspend/resume support to usb-storage. Just enough for it to qualify as PM-aware. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 58 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index eb901817b7d2..c1a902691bc6 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -111,11 +111,6 @@ static atomic_t total_threads = ATOMIC_INIT(0); static DECLARE_COMPLETION(threads_gone); -static int storage_probe(struct usb_interface *iface, - const struct usb_device_id *id); - -static void storage_disconnect(struct usb_interface *iface); - /* The entries in this table, except for final ones here * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, * line for line with the entries of us_unsuaul_dev_list[]. @@ -233,13 +228,40 @@ static struct us_unusual_dev us_unusual_dev_list[] = { { NULL } }; -static struct usb_driver usb_storage_driver = { - .owner = THIS_MODULE, - .name = "usb-storage", - .probe = storage_probe, - .disconnect = storage_disconnect, - .id_table = storage_usb_ids, -}; + +#ifdef CONFIG_PM /* Minimal support for suspend and resume */ + +static int storage_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* Wait until no command is running */ + down(&us->dev_semaphore); + + US_DEBUGP("%s\n", __FUNCTION__); + iface->dev.power.power_state.event = message.event; + + /* When runtime PM is working, we'll set a flag to indicate + * whether we should autoresume when a SCSI request arrives. */ + + up(&us->dev_semaphore); + return 0; +} + +static int storage_resume(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + down(&us->dev_semaphore); + + US_DEBUGP("%s\n", __FUNCTION__); + iface->dev.power.power_state.event = PM_EVENT_ON; + + up(&us->dev_semaphore); + return 0; +} + +#endif /* CONFIG_PM */ /* * fill_inquiry_response takes an unsigned char array (which must @@ -1042,6 +1064,18 @@ static void storage_disconnect(struct usb_interface *intf) * Initialization and registration ***********************************************************************/ +static struct usb_driver usb_storage_driver = { + .owner = THIS_MODULE, + .name = "usb-storage", + .probe = storage_probe, + .disconnect = storage_disconnect, +#ifdef CONFIG_PM + .suspend = storage_suspend, + .resume = storage_resume, +#endif + .id_table = storage_usb_ids, +}; + static int __init usb_stor_init(void) { int retval; -- cgit v1.2.3 From 3f13e66e219238e025ff561d69826da9342c3f4a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:43:36 -0700 Subject: [PATCH] PATCH: usb-storage: use kthread API This patch is originally from Alan Stern (as569). It has been rediffed against a current tree. This patch converts usb-storage to use the kthread API for creating its control and scanning threads. The new code doesn't use kthread_stop because the threads need (or will need in the future) to exit asynchronously. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 63 ++++++++++++++++------------------------------- drivers/usb/storage/usb.h | 3 --- 2 files changed, 21 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c1a902691bc6..3847ebed2aa4 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include @@ -310,22 +311,7 @@ static int usb_stor_control_thread(void * __us) struct us_data *us = (struct us_data *)__us; struct Scsi_Host *host = us_to_host(us); - lock_kernel(); - - /* - * This thread doesn't need any user-level access, - * so get rid of all our resources. - */ - daemonize("usb-storage"); current->flags |= PF_NOFREEZE; - unlock_kernel(); - - /* acquire a reference to the host, so it won't be deallocated - * until we're ready to exit */ - scsi_host_get(host); - - /* signal that we've started the thread */ - complete(&(us->notify)); for(;;) { US_DEBUGP("*** thread sleeping.\n"); @@ -768,6 +754,7 @@ static int get_pipes(struct us_data *us) static int usb_stor_acquire_resources(struct us_data *us) { int p; + struct task_struct *th; us->current_urb = usb_alloc_urb(0, GFP_KERNEL); if (!us->current_urb) { @@ -784,17 +771,19 @@ static int usb_stor_acquire_resources(struct us_data *us) } /* Start up our control thread */ - p = kernel_thread(usb_stor_control_thread, us, CLONE_VM); - if (p < 0) { + th = kthread_create(usb_stor_control_thread, us, "usb-storage"); + if (IS_ERR(th)) { printk(KERN_WARNING USB_STORAGE "Unable to start control thread\n"); - return p; + return PTR_ERR(th); } - us->pid = p; - atomic_inc(&total_threads); - /* Wait for the thread to start */ - wait_for_completion(&(us->notify)); + /* Take a reference to the host for the control thread and + * count it among all the threads we have launched. Then + * start it up. */ + scsi_host_get(us_to_host(us)); + atomic_inc(&total_threads); + wake_up_process(th); return 0; } @@ -890,21 +879,6 @@ static int usb_stor_scan_thread(void * __us) { struct us_data *us = (struct us_data *)__us; - /* - * This thread doesn't need any user-level access, - * so get rid of all our resources. - */ - lock_kernel(); - daemonize("usb-stor-scan"); - unlock_kernel(); - - /* Acquire a reference to the host, so it won't be deallocated - * until we're ready to exit */ - scsi_host_get(us_to_host(us)); - - /* Signal that we've started the thread */ - complete(&(us->notify)); - printk(KERN_DEBUG "usb-storage: device found at %d\n", us->pusb_dev->devnum); @@ -949,6 +923,7 @@ static int storage_probe(struct usb_interface *intf, struct us_data *us; const int id_index = id - storage_usb_ids; int result; + struct task_struct *th; US_DEBUGP("USB Mass Storage device detected\n"); @@ -1029,17 +1004,21 @@ static int storage_probe(struct usb_interface *intf, } /* Start up the thread for delayed SCSI-device scanning */ - result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM); - if (result < 0) { + th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan"); + if (IS_ERR(th)) { printk(KERN_WARNING USB_STORAGE "Unable to start the device-scanning thread\n"); quiesce_and_remove_host(us); + result = PTR_ERR(th); goto BadDevice; } - atomic_inc(&total_threads); - /* Wait for the thread to start */ - wait_for_completion(&(us->notify)); + /* Take a reference to the host for the scanning thread and + * count it among all the threads we have launched. Then + * start it up. */ + scsi_host_get(us_to_host(us)); + atomic_inc(&total_threads); + wake_up_process(th); return 0; diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index dfa4dc71dd3e..98b09711a739 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -161,9 +161,6 @@ struct us_data { struct scsi_cmnd *srb; /* current srb */ unsigned int tag; /* current dCBWTag */ - /* thread information */ - int pid; /* control thread */ - /* control and bulk communications data */ struct urb *current_urb; /* USB requests */ struct usb_ctrlrequest *cr; /* control requests */ -- cgit v1.2.3 From 72129cd6577793408ff546b0ddd5794c33f32399 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 25 Oct 2005 23:34:03 +0400 Subject: [PATCH] mdc800: remove embrions of C++ exceptions Signed-off-by: Alexey Dobriyan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/image/mdc800.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index e4ec133ee74a..1d973bcf56aa 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -975,13 +975,13 @@ static struct usb_driver mdc800_usb_driver = Init and Cleanup this driver (Main Functions) *************************************************************************/ -#define try(A) if (!(A)) goto cleanup_on_fail; - static int __init usb_mdc800_init (void) { int retval = -ENODEV; /* Allocate Memory */ - try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL)); + mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL); + if (!mdc800) + goto cleanup_on_fail; memset(mdc800, 0, sizeof(struct mdc800_data)); mdc800->dev = NULL; @@ -997,13 +997,25 @@ static int __init usb_mdc800_init (void) mdc800->downloaded = 0; mdc800->written = 0; - try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL)); - try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL)); - try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL)); + mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL); + if (!mdc800->irq_urb_buffer) + goto cleanup_on_fail; + mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL); + if (!mdc800->write_urb_buffer) + goto cleanup_on_fail; + mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL); + if (!mdc800->download_urb_buffer) + goto cleanup_on_fail; - try (mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL)); - try (mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL)); - try (mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL)); + mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL); + if (!mdc800->irq_urb) + goto cleanup_on_fail; + mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL); + if (!mdc800->download_urb) + goto cleanup_on_fail; + mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL); + if (!mdc800->write_urb) + goto cleanup_on_fail; /* Register the driver */ retval = usb_register(&mdc800_usb_driver); -- cgit v1.2.3 From e52783206ada0c0276c8dd74c0ecd0007ead7c00 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 23 Oct 2005 23:52:39 -0700 Subject: [PATCH] USB Storage: Expand range of Freecom unusual_devs entry Freecom seems to be one of those vendors that can't get the GET CAPACITY thing right. This expands the US_FL_FIX_CAPACITY flag for the entire range of their fccd product line. This is based on a patch sent by Stuart Black . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d0f6a7e2fe31..9e926a8f2116 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -756,7 +756,7 @@ UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, #endif /* Reported by Eero Volotinen */ -UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406, +UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, "Freecom Technologies", "FHD-Classic", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.2.3 From be69e5b1900a19a545becda822b18d6f09168ba5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Oct 2005 15:56:06 -0400 Subject: [PATCH] usbcore: Improve endpoint sysfs file handling This revised patch (as587b) improves the implementation of USB endpoint sysfs files. Instead of storing a whole bunch of attributes for every single endpoint, each endpoint now gets its own kobject and they can share a static list of attributes. The number of extra fields added to struct usb_host_endpoint has been reduced from 4 to 1. The bEndpointAddress field is retained even though it is redundant (it repeats the same information as the attributes' directory name). The code avoids calling kobject_register, to prevent generating unwanted hotplug events. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 219 +++++++++++++++++++++++++++-------------------- include/linux/usb.h | 5 +- 2 files changed, 125 insertions(+), 99 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4bdbc9df6e03..f18317fb49ee 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -23,43 +23,56 @@ #include "usb.h" /* endpoint stuff */ -struct endpoint_attribute { - struct device_attribute dev_attr; - struct usb_endpoint_descriptor *endpoint; +struct ep_object { + struct usb_endpoint_descriptor *desc; struct usb_device *udev; + struct kobject kobj; }; -#define to_endpoint_attr(_dev_attr) \ - container_of(_dev_attr, struct endpoint_attribute, dev_attr) - -#define usb_ep_attr(field, format_string) \ -static ssize_t show_ep_##field(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); \ - \ - return sprintf(buf, format_string, endpoint_attr->endpoint->field); \ -} +#define to_ep_object(_kobj) \ + container_of(_kobj, struct ep_object, kobj) + +struct ep_attribute { + struct attribute attr; + ssize_t (*show)(struct usb_device *, + struct usb_endpoint_descriptor *, char *); +}; +#define to_ep_attribute(_attr) \ + container_of(_attr, struct ep_attribute, attr) + +#define EP_ATTR(_name) \ +struct ep_attribute ep_##_name = { \ + .attr = {.name = #_name, .owner = THIS_MODULE, \ + .mode = S_IRUGO}, \ + .show = show_ep_##_name} + +#define usb_ep_attr(field, format_string) \ +static ssize_t show_ep_##field(struct usb_device *udev, \ + struct usb_endpoint_descriptor *desc, \ + char *buf) \ +{ \ + return sprintf(buf, format_string, desc->field); \ +} \ +static EP_ATTR(field); + usb_ep_attr(bLength, "%02x\n") -usb_ep_attr(bDescriptorType, "%02x\n") usb_ep_attr(bEndpointAddress, "%02x\n") usb_ep_attr(bmAttributes, "%02x\n") usb_ep_attr(bInterval, "%02x\n") -static ssize_t show_ep_wMaxPacketSize(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_ep_wMaxPacketSize(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); - return sprintf(buf, "%04x\n", - le16_to_cpu(endpoint_attr->endpoint->wMaxPacketSize) & 0x07ff); + le16_to_cpu(desc->wMaxPacketSize) & 0x07ff); } +static EP_ATTR(wMaxPacketSize); -static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_ep_type(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); char *type = "unknown"; - switch (endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_CONTROL: type = "Control"; break; @@ -75,35 +88,34 @@ static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, c } return sprintf(buf, "%s\n", type); } +static EP_ATTR(type); -static ssize_t show_ep_interval(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_ep_interval(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); - struct usb_device *udev = endpoint_attr->udev; - struct usb_endpoint_descriptor *endpoint = endpoint_attr->endpoint; char unit; unsigned interval = 0; unsigned in; - in = (endpoint->bEndpointAddress & USB_DIR_IN); + in = (desc->bEndpointAddress & USB_DIR_IN); - switch (endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_CONTROL: if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ - interval = endpoint->bInterval; + interval = desc->bInterval; break; case USB_ENDPOINT_XFER_ISOC: - interval = 1 << (endpoint->bInterval - 1); + interval = 1 << (desc->bInterval - 1); break; case USB_ENDPOINT_XFER_BULK: - if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ - interval = endpoint->bInterval; + if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + interval = desc->bInterval; break; case USB_ENDPOINT_XFER_INT: - if (udev->speed == USB_SPEED_HIGH) { - interval = 1 << (endpoint->bInterval - 1); - } else - interval = endpoint->bInterval; + if (udev->speed == USB_SPEED_HIGH) + interval = 1 << (desc->bInterval - 1); + else + interval = desc->bInterval; break; } interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000; @@ -116,78 +128,95 @@ static ssize_t show_ep_interval(struct device *dev, struct device_attribute *att return sprintf(buf, "%d%cs\n", interval, unit); } +static EP_ATTR(interval); -static ssize_t show_ep_direction(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_ep_direction(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); char *direction; - if ((endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL) + if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL) direction = "both"; - else if (endpoint_attr->endpoint->bEndpointAddress & USB_DIR_IN) + else if (desc->bEndpointAddress & USB_DIR_IN) direction = "in"; else direction = "out"; return sprintf(buf, "%s\n", direction); } +static EP_ATTR(direction); + +static struct attribute *ep_attrs[] = { + &ep_bLength.attr, + &ep_bEndpointAddress.attr, + &ep_bmAttributes.attr, + &ep_bInterval.attr, + &ep_wMaxPacketSize.attr, + &ep_type.attr, + &ep_interval.attr, + &ep_direction.attr, + NULL, +}; -static struct endpoint_attribute *create_ep_attr(struct usb_endpoint_descriptor *endpoint, - struct usb_device *udev, char *name, - ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf)) +static void ep_object_release(struct kobject *kobj) { - struct endpoint_attribute *ep_attr; - - ep_attr = kzalloc(sizeof(*ep_attr), GFP_KERNEL); - if (ep_attr) { - ep_attr->endpoint = endpoint; - ep_attr->udev = udev; - ep_attr->dev_attr.attr.name = name; - ep_attr->dev_attr.attr.mode = 0444; - ep_attr->dev_attr.attr.owner = THIS_MODULE; - ep_attr->dev_attr.show = show; - } - return ep_attr; + kfree(to_ep_object(kobj)); } -static void usb_create_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint, struct usb_device *udev) +static ssize_t ep_object_show(struct kobject *kobj, struct attribute *attr, + char *buf) { - struct usb_endpoint_descriptor *ep; - - ep = &endpoint->desc; - - endpoint->attrs = kzalloc(sizeof(struct attribute *) * 10, GFP_KERNEL); - endpoint->attrs[0] = &(create_ep_attr(ep, udev, "direction", show_ep_direction)->dev_attr.attr); - endpoint->attrs[1] = &(create_ep_attr(ep, udev, "type", show_ep_type)->dev_attr.attr); - endpoint->attrs[2] = &(create_ep_attr(ep, udev, "bLength", show_ep_bLength)->dev_attr.attr); - endpoint->attrs[3] = &(create_ep_attr(ep, udev, "bDescriptorType", show_ep_bDescriptorType)->dev_attr.attr); - endpoint->attrs[4] = &(create_ep_attr(ep, udev, "bEndpointAddress", show_ep_bEndpointAddress)->dev_attr.attr); - endpoint->attrs[5] = &(create_ep_attr(ep, udev, "bmAttributes", show_ep_bmAttributes)->dev_attr.attr); - endpoint->attrs[6] = &(create_ep_attr(ep, udev, "wMaxPacketSize", show_ep_wMaxPacketSize)->dev_attr.attr); - endpoint->attrs[7] = &(create_ep_attr(ep, udev, "bInterval", show_ep_bInterval)->dev_attr.attr); - endpoint->attrs[8] = &(create_ep_attr(ep, udev, "interval", show_ep_interval)->dev_attr.attr); - endpoint->attrs[9] = NULL; - endpoint->num_attrs = 9; - - endpoint->attr_group = kzalloc(sizeof(*endpoint->attr_group), GFP_KERNEL); - endpoint->attr_name = kzalloc(10, GFP_KERNEL); - sprintf(endpoint->attr_name, "ep_%02x", endpoint->desc.bEndpointAddress); - - endpoint->attr_group->attrs = endpoint->attrs; - endpoint->attr_group->name = endpoint->attr_name; - sysfs_create_group(kobj, endpoint->attr_group); + struct ep_object *ep_obj = to_ep_object(kobj); + struct ep_attribute *ep_attr = to_ep_attribute(attr); + + return (ep_attr->show)(ep_obj->udev, ep_obj->desc, buf); } -static void usb_remove_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint) +static struct sysfs_ops ep_object_sysfs_ops = { + .show = ep_object_show, +}; + +static struct kobj_type ep_object_ktype = { + .release = ep_object_release, + .sysfs_ops = &ep_object_sysfs_ops, + .default_attrs = ep_attrs, +}; + +static void usb_create_ep_files(struct kobject *parent, + struct usb_host_endpoint *endpoint, + struct usb_device *udev) { - int i; + struct ep_object *ep_obj; + struct kobject *kobj; + + ep_obj = kzalloc(sizeof(struct ep_object), GFP_KERNEL); + if (!ep_obj) + return; - sysfs_remove_group(kobj, endpoint->attr_group); - kfree(endpoint->attr_group); - kfree(endpoint->attr_name); - for (i = 0; i < endpoint->num_attrs; ++i) - kfree(endpoint->attrs[i]); - kfree(endpoint->attrs); + ep_obj->desc = &endpoint->desc; + ep_obj->udev = udev; + + kobj = &ep_obj->kobj; + kobject_set_name(kobj, "ep_%02x", endpoint->desc.bEndpointAddress); + kobj->parent = parent; + kobj->ktype = &ep_object_ktype; + + /* Don't use kobject_register, because it generates a hotplug event */ + kobject_init(kobj); + if (kobject_add(kobj) == 0) + endpoint->kobj = kobj; + else + kobject_put(kobj); +} + +static void usb_remove_ep_files(struct usb_host_endpoint *endpoint) +{ + + if (endpoint->kobj) { + kobject_del(endpoint->kobj); + kobject_put(endpoint->kobj); + endpoint->kobj = NULL; + } } /* Active configuration fields */ @@ -411,7 +440,7 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) { struct device *dev = &udev->dev; - usb_remove_ep_files(&dev->kobj, &udev->ep0); + usb_remove_ep_files(&udev->ep0); sysfs_remove_group(&dev->kobj, &dev_attr_grp); if (udev->descriptor.iManufacturer) @@ -496,7 +525,7 @@ static struct attribute_group intf_attr_grp = { .attrs = intf_attrs, }; -static void usb_create_intf_ep_files(struct usb_interface *intf) +static inline void usb_create_intf_ep_files(struct usb_interface *intf) { struct usb_host_interface *iface_desc; int i; @@ -504,17 +533,17 @@ static void usb_create_intf_ep_files(struct usb_interface *intf) iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i], - interface_to_usbdev(intf)); + interface_to_usbdev(intf)); } -static void usb_remove_intf_ep_files(struct usb_interface *intf) +static inline void usb_remove_intf_ep_files(struct usb_interface *intf) { struct usb_host_interface *iface_desc; int i; iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) - usb_remove_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i]); + usb_remove_ep_files(&iface_desc->endpoint[i]); } void usb_create_sysfs_intf_files (struct usb_interface *intf) diff --git a/include/linux/usb.h b/include/linux/usb.h index a2d923fd54f9..465ff4585ca5 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -57,10 +57,7 @@ struct usb_host_endpoint { struct usb_endpoint_descriptor desc; struct list_head urb_list; void *hcpriv; - char *attr_name; - struct attribute_group *attr_group; - struct attribute **attrs; - int num_attrs; + struct kobject *kobj; /* For sysfs info */ unsigned char *extra; /* Extra descriptors */ int extralen; -- cgit v1.2.3 From 0e6c8e8db508fcb292836b23d039649c5de29090 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:33:03 -0400 Subject: [PATCH] usbcore: endpoint attributes track altsetting changes This patch (as588) fixes the way endpoint attribute files are registered and unregistered. Now they will correctly track along with altsetting changes. This fixes bugzilla entry #5467. In a separate but related change, when a usb_reset_configuration call fails, the device state is not changed to USB_STATE_ADDRESS. In the first place, failure means that we don't know what the state is, not that we know the device is unconfigured. In the second place, doing this can potentially lead to a memory leak, since usbcore might not realize there still is a current configuration that needs to be destroyed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 574d0d4b3401..5ad0d5e28119 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1149,6 +1149,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) */ /* prevent submissions using previous endpoint settings */ + if (device_is_registered(&iface->dev)) + usb_remove_sysfs_intf_files(iface); usb_disable_interface(dev, iface); iface->cur_altsetting = alt; @@ -1184,6 +1186,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) * (Likewise, EP0 never "halts" on well designed devices.) */ usb_enable_interface(dev, iface); + if (device_is_registered(&iface->dev)) + usb_create_sysfs_intf_files(iface); return 0; } @@ -1233,10 +1237,8 @@ int usb_reset_configuration(struct usb_device *dev) USB_REQ_SET_CONFIGURATION, 0, config->desc.bConfigurationValue, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (retval < 0) { - usb_set_device_state(dev, USB_STATE_ADDRESS); + if (retval < 0) return retval; - } dev->toggle[0] = dev->toggle[1] = 0; @@ -1245,6 +1247,8 @@ int usb_reset_configuration(struct usb_device *dev) struct usb_interface *intf = config->interface[i]; struct usb_host_interface *alt; + if (device_is_registered(&intf->dev)) + usb_remove_sysfs_intf_files(intf); alt = usb_altnum_to_altsetting(intf, 0); /* No altsetting 0? We'll assume the first altsetting. @@ -1257,6 +1261,8 @@ int usb_reset_configuration(struct usb_device *dev) intf->cur_altsetting = alt; usb_enable_interface(dev, intf); + if (device_is_registered(&intf->dev)) + usb_create_sysfs_intf_files(intf); } return 0; } -- cgit v1.2.3 From b724ae77969fd832be71419dca74bece9af287ff Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:36:00 -0400 Subject: [PATCH] usbcore: Wrap lines before column 80 I can't stand text lines that wrap-around in my 80-column windows. This patch (as589) makes cosmetic changes to a couple of source files. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 30 +++++++---- include/linux/usb.h | 132 ++++++++++++++++++++++++++++++----------------- 2 files changed, 106 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f18317fb49ee..4cca77cf0c48 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -221,7 +221,8 @@ static void usb_remove_ep_files(struct usb_host_endpoint *endpoint) /* Active configuration fields */ #define usb_actconfig_show(field, multiplier, format_string) \ -static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##field (struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ struct usb_host_config *actconfig; \ @@ -243,7 +244,8 @@ usb_actconfig_attr (bNumInterfaces, 1, "%2d\n") usb_actconfig_attr (bmAttributes, 1, "%2x\n") usb_actconfig_attr (bMaxPower, 2, "%3dmA\n") -static ssize_t show_configuration_string(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_configuration_string(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_device *udev; struct usb_host_config *actconfig; @@ -266,7 +268,8 @@ static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL); usb_actconfig_show(bConfigurationValue, 1, "%u\n"); static ssize_t -set_bConfigurationValue (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +set_bConfigurationValue (struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct usb_device *udev = udev = to_usb_device (dev); int config, value; @@ -284,7 +287,8 @@ static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR, /* String fields */ #define usb_string_attr(name) \ -static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ int len; \ @@ -364,7 +368,8 @@ static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL); /* Descriptor fields */ #define usb_descriptor_attr_le16(field, format_string) \ static ssize_t \ -show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +show_##field (struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct usb_device *udev; \ \ @@ -380,7 +385,8 @@ usb_descriptor_attr_le16(bcdDevice, "%04x\n") #define usb_descriptor_attr(field, format_string) \ static ssize_t \ -show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +show_##field (struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct usb_device *udev; \ \ @@ -455,11 +461,13 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) /* Interface fields */ #define usb_intf_attr(field, format_string) \ static ssize_t \ -show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +show_##field (struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct usb_interface *intf = to_usb_interface (dev); \ \ - return sprintf (buf, format_string, intf->cur_altsetting->desc.field); \ + return sprintf (buf, format_string, \ + intf->cur_altsetting->desc.field); \ } \ static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL); @@ -470,7 +478,8 @@ usb_intf_attr (bInterfaceClass, "%02x\n") usb_intf_attr (bInterfaceSubClass, "%02x\n") usb_intf_attr (bInterfaceProtocol, "%02x\n") -static ssize_t show_interface_string(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_interface_string(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_interface *intf; struct usb_device *udev; @@ -487,7 +496,8 @@ static ssize_t show_interface_string(struct device *dev, struct device_attribute } static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL); -static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_modalias(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_interface *intf; struct usb_device *udev; diff --git a/include/linux/usb.h b/include/linux/usb.h index 465ff4585ca5..c500d6b5a16d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -137,7 +137,8 @@ struct usb_interface { * active alternate setting */ unsigned num_altsetting; /* number of alternate settings */ - int minor; /* minor number this interface is bound to */ + int minor; /* minor number this interface is + * bound to */ enum usb_interface_condition condition; /* state of binding */ struct device dev; /* interface specific device info */ struct class_device *class_dev; @@ -249,7 +250,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, __usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\ type,(void**)ptr) -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ struct usb_operations; @@ -269,7 +270,8 @@ struct usb_bus { unsigned is_b_host:1; /* true during some HNP roleswitches */ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ - int devnum_next; /* Next open device number in round-robin allocation */ + int devnum_next; /* Next open device number in + * round-robin allocation */ struct usb_devmap devmap; /* device address allocation map */ struct usb_operations *op; /* Operations (specific to the HC) */ @@ -290,15 +292,16 @@ struct usb_bus { struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ struct class_device *class_dev; /* class device for this bus */ - struct kref kref; /* handles reference counting this bus */ - void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */ + struct kref kref; /* reference counting for this bus */ + void (*release)(struct usb_bus *bus); + #if defined(CONFIG_USB_MON) struct mon_bus *mon_bus; /* non-null when associated */ int monitored; /* non-zero when monitored */ #endif }; -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* This is arbitrary. * From USB 2.0 spec Table 11-13, offset 7, a hub can @@ -327,7 +330,8 @@ struct usb_device { struct semaphore serialize; - unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */ + unsigned int toggle[2]; /* one bit for each endpoint + * ([0] = IN, [1] = OUT) */ struct usb_device *parent; /* our hub, unless we're the root */ struct usb_bus *bus; /* Bus we're part of */ @@ -344,7 +348,7 @@ struct usb_device { char **rawdescriptors; /* Raw descriptors for each config */ - int have_langid; /* whether string_langid is valid yet */ + int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ char *product; @@ -441,22 +445,31 @@ extern struct usb_host_interface *usb_altnum_to_altsetting( * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are * high speed, and a different one if they are full or low speed. */ -static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) +static inline int usb_make_path (struct usb_device *dev, char *buf, + size_t size) { int actual; - actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath); + actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, + dev->devpath); return (actual >= (int)size) ? -1 : actual; } /*-------------------------------------------------------------------------*/ -#define USB_DEVICE_ID_MATCH_DEVICE (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) -#define USB_DEVICE_ID_MATCH_DEV_RANGE (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) -#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) +#define USB_DEVICE_ID_MATCH_DEVICE \ + (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) +#define USB_DEVICE_ID_MATCH_DEV_RANGE \ + (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) +#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ + (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) #define USB_DEVICE_ID_MATCH_DEV_INFO \ - (USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL) + (USB_DEVICE_ID_MATCH_DEV_CLASS | \ + USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \ + USB_DEVICE_ID_MATCH_DEV_PROTOCOL) #define USB_DEVICE_ID_MATCH_INT_INFO \ - (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL) + (USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_SUBCLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL) /** * USB_DEVICE - macro used to describe a specific usb device @@ -467,9 +480,11 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific device. */ #define USB_DEVICE(vend,prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), .idProduct = (prod) + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), \ + .idProduct = (prod) /** - * USB_DEVICE_VER - macro used to describe a specific usb device with a version range + * USB_DEVICE_VER - macro used to describe a specific usb device with a + * version range * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID * @lo: the bcdDevice_lo value @@ -479,7 +494,9 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific device, with a version range. */ #define USB_DEVICE_VER(vend,prod,lo,hi) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, .idVendor = (vend), .idProduct = (prod), .bcdDevice_lo = (lo), .bcdDevice_hi = (hi) + .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \ + .idVendor = (vend), .idProduct = (prod), \ + .bcdDevice_lo = (lo), .bcdDevice_hi = (hi) /** * USB_DEVICE_INFO - macro used to describe a class of usb devices @@ -491,7 +508,8 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific class of devices. */ #define USB_DEVICE_INFO(cl,sc,pr) \ - .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), .bDeviceSubClass = (sc), .bDeviceProtocol = (pr) + .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), \ + .bDeviceSubClass = (sc), .bDeviceProtocol = (pr) /** * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces @@ -503,9 +521,10 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific class of interfaces. */ #define USB_INTERFACE_INFO(cl,sc,pr) \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /** * struct usb_driver - identifies USB driver to usbcore @@ -558,7 +577,8 @@ struct usb_driver { void (*disconnect) (struct usb_interface *intf); - int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf); + int (*ioctl) (struct usb_interface *intf, unsigned int code, + void *buf); int (*suspend) (struct usb_interface *intf, pm_message_t message); int (*resume) (struct usb_interface *intf); @@ -601,7 +621,7 @@ extern void usb_deregister_dev(struct usb_interface *intf, extern int usb_disabled(void); -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* * URB support, for asynchronous request completions @@ -611,12 +631,14 @@ extern int usb_disabled(void); * urb->transfer_flags: */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */ +#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame + * ignored */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ -#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */ -#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ +#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ +#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt + * needed */ struct usb_iso_packet_descriptor { unsigned int offset; @@ -804,7 +826,8 @@ struct urb u8 reject; /* submissions will fail */ /* public, documented fields in the urb that can be used by drivers */ - struct list_head urb_list; /* list head for use by the urb owner */ + struct list_head urb_list; /* list head for use by the urb's + * current owner */ struct usb_device *dev; /* (in) pointer to associated device */ unsigned int pipe; /* (in) pipe information */ int status; /* (return) non-ISO status */ @@ -817,14 +840,16 @@ struct urb dma_addr_t setup_dma; /* (in) dma addr for setup_packet */ int start_frame; /* (modify) start frame (ISO) */ int number_of_packets; /* (in) number of ISO packets */ - int interval; /* (modify) transfer interval (INT/ISO) */ + int interval; /* (modify) transfer interval + * (INT/ISO) */ int error_count; /* (return) number of ISO errors */ void *context; /* (in) context for completion */ usb_complete_t complete; /* (in) completion routine */ - struct usb_iso_packet_descriptor iso_frame_desc[0]; /* (in) ISO ONLY */ + struct usb_iso_packet_descriptor iso_frame_desc[0]; + /* (in) ISO ONLY */ }; -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /** * usb_fill_control_urb - initializes a control urb @@ -1049,7 +1074,7 @@ void usb_sg_cancel (struct usb_sg_request *io); void usb_sg_wait (struct usb_sg_request *io); -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* * For various legacy reasons, Linux has a small cookie that's paired with @@ -1090,23 +1115,34 @@ void usb_sg_wait (struct usb_sg_request *io); /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | ((bit) << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) -static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) +static inline unsigned int __create_pipe(struct usb_device *dev, + unsigned int endpoint) { return (dev->devnum << 8) | (endpoint << 15); } /* Create various pipes... */ -#define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndctrlpipe(dev,endpoint) \ + ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvctrlpipe(dev,endpoint) \ + ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndisocpipe(dev,endpoint) \ + ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvisocpipe(dev,endpoint) \ + ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndbulkpipe(dev,endpoint) \ + ((PIPE_BULK << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvbulkpipe(dev,endpoint) \ + ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndintpipe(dev,endpoint) \ + ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvintpipe(dev,endpoint) \ + ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) /*-------------------------------------------------------------------------*/ @@ -1130,7 +1166,7 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) return le16_to_cpu(ep->desc.wMaxPacketSize); } -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* Events from the usb core */ #define USB_DEVICE_ADD 0x0001 @@ -1141,14 +1177,18 @@ extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); #ifdef DEBUG -#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg) +#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \ + __FILE__ , ## arg) #else #define dbg(format, arg...) do {} while (0) #endif -#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg) -#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg) -#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg) +#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ + __FILE__ , ## arg) +#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \ + __FILE__ , ## arg) +#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \ + __FILE__ , ## arg) #endif /* __KERNEL__ */ -- cgit v1.2.3 From 0a1ef3b5a765a6f20e7b8caf295aad3276243966 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:38:24 -0400 Subject: [PATCH] usbcore: Use kzalloc instead of kmalloc/memset This patch (as590) fixes up all the remaining places where usbcore can use kzalloc rather than kmalloc/memset. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 12 ++++-------- drivers/usb/core/devio.c | 4 ++-- drivers/usb/core/hcd.c | 3 +-- drivers/usb/core/hub.c | 4 +--- drivers/usb/core/message.c | 3 +-- drivers/usb/core/usb.c | 4 +--- 6 files changed, 10 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 99595e07b653..63f374e62db2 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -188,10 +188,9 @@ static int usb_parse_interface(struct device *ddev, int cfgno, } len = sizeof(struct usb_host_endpoint) * num_ep; - alt->endpoint = kmalloc(len, GFP_KERNEL); + alt->endpoint = kzalloc(len, GFP_KERNEL); if (!alt->endpoint) return -ENOMEM; - memset(alt->endpoint, 0, len); /* Parse all the endpoint descriptors */ n = 0; @@ -353,10 +352,9 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx, } len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j; - config->intf_cache[i] = intfc = kmalloc(len, GFP_KERNEL); + config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL); if (!intfc) return -ENOMEM; - memset(intfc, 0, len); kref_init(&intfc->ref); } @@ -459,16 +457,14 @@ int usb_get_configuration(struct usb_device *dev) } length = ncfg * sizeof(struct usb_host_config); - dev->config = kmalloc(length, GFP_KERNEL); + dev->config = kzalloc(length, GFP_KERNEL); if (!dev->config) goto err2; - memset(dev->config, 0, length); length = ncfg * sizeof(char *); - dev->rawdescriptors = kmalloc(length, GFP_KERNEL); + dev->rawdescriptors = kzalloc(length, GFP_KERNEL); if (!dev->rawdescriptors) goto err2; - memset(dev->rawdescriptors, 0, length); buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); if (!buffer) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index ffb2e242b100..942cd437dc48 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -210,10 +210,10 @@ err: static struct async *alloc_async(unsigned int numisoframes) { unsigned int assize = sizeof(struct async) + numisoframes * sizeof(struct usb_iso_packet_descriptor); - struct async *as = kmalloc(assize, GFP_KERNEL); + struct async *as = kzalloc(assize, GFP_KERNEL); + if (!as) return NULL; - memset(as, 0, assize); as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL); if (!as->urb) { kfree(as); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index e8f2b8d8f14d..61ef9943757e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -744,10 +744,9 @@ struct usb_bus *usb_alloc_bus (struct usb_operations *op) { struct usb_bus *bus; - bus = kmalloc (sizeof *bus, GFP_KERNEL); + bus = kzalloc (sizeof *bus, GFP_KERNEL); if (!bus) return NULL; - memset(bus, 0, sizeof(struct usb_bus)); usb_bus_init (bus); bus->op = op; return bus; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a2ebd89916f..8ba5854e5387 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -865,14 +865,12 @@ descriptor_error: /* We found a hub */ dev_info (&intf->dev, "USB hub found\n"); - hub = kmalloc(sizeof(*hub), GFP_KERNEL); + hub = kzalloc(sizeof(*hub), GFP_KERNEL); if (!hub) { dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n"); return -ENOMEM; } - memset(hub, 0, sizeof(*hub)); - INIT_LIST_HEAD(&hub->event_list); hub->intfdev = &intf->dev; hub->hdev = hdev; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5ad0d5e28119..3519f317898e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1350,7 +1350,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) } for (; n < nintf; ++n) { - new_interfaces[n] = kmalloc( + new_interfaces[n] = kzalloc( sizeof(struct usb_interface), GFP_KERNEL); if (!new_interfaces[n]) { @@ -1391,7 +1391,6 @@ free_interfaces: struct usb_host_interface *alt; cp->interface[i] = intf = new_interfaces[i]; - memset(intf, 0, sizeof(*intf)); intfc = cp->intf_cache[i]; intf->altsetting = intfc->altsetting; intf->num_altsetting = intfc->num_altsetting; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4eca4904938f..0eefff7bcb3c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -704,12 +704,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) { struct usb_device *dev; - dev = kmalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return NULL; - memset(dev, 0, sizeof(*dev)); - bus = usb_bus_get(bus); if (!bus) { kfree(dev); -- cgit v1.2.3 From 16f16d117c1eb99451e4c73c87546eef05c66790 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:41:19 -0400 Subject: [PATCH] USB: Fix maxpacket length for ep0 on root hubs This patch (as591) fixes a rather innocuous bug that has been around for quite a long time: Virtual root hubs should have a maxpacket length of 64 for endpoint 0. I didn't realize it was wrong until I started looking through the endpoint attribute files. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 61ef9943757e..6c7ca5b08cd6 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -130,7 +130,7 @@ static const u8 usb2_rh_dev_descriptor [18] = { 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ 0x00, 0x00, /* __le16 idVendor; */ 0x00, 0x00, /* __le16 idProduct; */ @@ -153,7 +153,7 @@ static const u8 usb11_rh_dev_descriptor [18] = { 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ 0x00, 0x00, /* __le16 idVendor; */ 0x00, 0x00, /* __le16 idProduct; */ -- cgit v1.2.3 From 4f62efe67f077db17dad03a1d4c9665000a3eb45 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 16:24:14 -0400 Subject: [PATCH] usbcore: Fix handling of sysfs strings and other attributes This patch (as592) makes a few small improvements to the way device strings are handled, and it fixes some bugs in a couple of other sysfs attribute routines. (Look at show_configuration_string() to see what I mean.) Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 10 ++++++---- drivers/usb/core/hub.c | 22 ++++----------------- drivers/usb/core/message.c | 48 +++++++++++++++++++++++++++++----------------- drivers/usb/core/sysfs.c | 36 +++++++++++++++------------------- drivers/usb/core/usb.h | 1 + include/linux/usb.h | 10 ++++++---- 6 files changed, 62 insertions(+), 65 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 63f374e62db2..993019500cc3 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -112,8 +112,12 @@ void usb_release_interface_cache(struct kref *ref) struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); int j; - for (j = 0; j < intfc->num_altsetting; j++) - kfree(intfc->altsetting[j].endpoint); + for (j = 0; j < intfc->num_altsetting; j++) { + struct usb_host_interface *alt = &intfc->altsetting[j]; + + kfree(alt->endpoint); + kfree(alt->string); + } kfree(intfc); } @@ -420,8 +424,6 @@ void usb_destroy_configuration(struct usb_device *dev) struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - cf->string = NULL; - for (i = 0; i < cf->desc.bNumInterfaces; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8ba5854e5387..1bacb374b007 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1204,21 +1204,6 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) {} #endif -static void get_string(struct usb_device *udev, char **string, int index) -{ - char *buf; - - if (!index) - return; - buf = kmalloc(256, GFP_KERNEL); - if (!buf) - return; - if (usb_string(udev, index, buf, 256) > 0) - *string = buf; - else - kfree(buf); -} - #ifdef CONFIG_USB_OTG #include "otg_whitelist.h" @@ -1257,9 +1242,10 @@ int usb_new_device(struct usb_device *udev) } /* read the standard strings and cache them if present */ - get_string(udev, &udev->product, udev->descriptor.iProduct); - get_string(udev, &udev->manufacturer, udev->descriptor.iManufacturer); - get_string(udev, &udev->serial, udev->descriptor.iSerialNumber); + udev->product = usb_cache_string(udev, udev->descriptor.iProduct); + udev->manufacturer = usb_cache_string(udev, + udev->descriptor.iManufacturer); + udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); /* Tell the world! */ dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 3519f317898e..644a3d4f12aa 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -787,6 +787,31 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) return err; } +/** + * usb_cache_string - read a string descriptor and cache it for later use + * @udev: the device whose string descriptor is being read + * @index: the descriptor index + * + * Returns a pointer to a kmalloc'ed buffer containing the descriptor string, + * or NULL if the index is 0 or the string could not be read. + */ +char *usb_cache_string(struct usb_device *udev, int index) +{ + char *buf; + char *smallbuf = NULL; + int len; + + if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) { + if ((len = usb_string(udev, index, buf, 256)) > 0) { + if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL) + return buf; + memcpy(smallbuf, buf, len); + } + kfree(buf); + } + return smallbuf; +} + /* * usb_get_device_descriptor - (re)reads the device descriptor (usbcore) * @dev: the device whose device descriptor is being updated @@ -1008,8 +1033,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg (&dev->dev, "unregistering interface %s\n", interface->dev.bus_id); usb_remove_sysfs_intf_files(interface); - kfree(interface->cur_altsetting->string); - interface->cur_altsetting->string = NULL; device_del (&interface->dev); } @@ -1422,12 +1445,9 @@ free_interfaces: } kfree(new_interfaces); - if ((cp->desc.iConfiguration) && - (cp->string == NULL)) { - cp->string = kmalloc(256, GFP_KERNEL); - if (cp->string) - usb_string(dev, cp->desc.iConfiguration, cp->string, 256); - } + if (cp->string == NULL) + cp->string = usb_cache_string(dev, + cp->desc.iConfiguration); /* Now that all the interfaces are set up, register them * to trigger binding of drivers to interfaces. probe() @@ -1437,13 +1457,12 @@ free_interfaces: */ for (i = 0; i < nintf; ++i) { struct usb_interface *intf = cp->interface[i]; - struct usb_interface_descriptor *desc; + struct usb_host_interface *alt = intf->cur_altsetting; - desc = &intf->altsetting [0].desc; dev_dbg (&dev->dev, "adding %s (config #%d, interface %d)\n", intf->dev.bus_id, configuration, - desc->bInterfaceNumber); + alt->desc.bInterfaceNumber); ret = device_add (&intf->dev); if (ret != 0) { dev_err(&dev->dev, @@ -1452,13 +1471,6 @@ free_interfaces: ret); continue; } - if ((intf->cur_altsetting->desc.iInterface) && - (intf->cur_altsetting->string == NULL)) { - intf->cur_altsetting->string = kmalloc(256, GFP_KERNEL); - if (intf->cur_altsetting->string) - usb_string(dev, intf->cur_altsetting->desc.iInterface, - intf->cur_altsetting->string, 256); - } usb_create_sysfs_intf_files (intf); } } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4cca77cf0c48..edd83e014452 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -249,18 +249,12 @@ static ssize_t show_configuration_string(struct device *dev, { struct usb_device *udev; struct usb_host_config *actconfig; - int len; udev = to_usb_device (dev); actconfig = udev->actconfig; if ((!actconfig) || (!actconfig->string)) return 0; - len = sprintf(buf, actconfig->string, PAGE_SIZE); - if (len < 0) - return 0; - buf[len] = '\n'; - buf[len+1] = 0; - return len+1; + return sprintf(buf, "%s\n", actconfig->string); } static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL); @@ -291,15 +285,9 @@ static ssize_t show_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ - int len; \ \ udev = to_usb_device (dev); \ - len = snprintf(buf, 256, "%s", udev->name); \ - if (len < 0) \ - return 0; \ - buf[len] = '\n'; \ - buf[len+1] = 0; \ - return len+1; \ + return sprintf(buf, "%s\n", udev->name); \ } \ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); @@ -449,11 +437,11 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) usb_remove_ep_files(&udev->ep0); sysfs_remove_group(&dev->kobj, &dev_attr_grp); - if (udev->descriptor.iManufacturer) + if (udev->manufacturer) device_remove_file(dev, &dev_attr_manufacturer); - if (udev->descriptor.iProduct) + if (udev->product) device_remove_file(dev, &dev_attr_product); - if (udev->descriptor.iSerialNumber) + if (udev->serial) device_remove_file(dev, &dev_attr_serial); device_remove_file (dev, &dev_attr_configuration); } @@ -535,7 +523,8 @@ static struct attribute_group intf_attr_grp = { .attrs = intf_attrs, }; -static inline void usb_create_intf_ep_files(struct usb_interface *intf) +static inline void usb_create_intf_ep_files(struct usb_interface *intf, + struct usb_device *udev) { struct usb_host_interface *iface_desc; int i; @@ -543,7 +532,7 @@ static inline void usb_create_intf_ep_files(struct usb_interface *intf) iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i], - interface_to_usbdev(intf)); + udev); } static inline void usb_remove_intf_ep_files(struct usb_interface *intf) @@ -558,11 +547,16 @@ static inline void usb_remove_intf_ep_files(struct usb_interface *intf) void usb_create_sysfs_intf_files (struct usb_interface *intf) { + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); - if (intf->cur_altsetting->string) + if (alt->string == NULL) + alt->string = usb_cache_string(udev, alt->desc.iInterface); + if (alt->string) device_create_file(&intf->dev, &dev_attr_interface); - usb_create_intf_ep_files(intf); + usb_create_intf_ep_files(intf, udev); } void usb_remove_sysfs_intf_files (struct usb_interface *intf) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 888dbe443695..1c4a68499dce 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -13,6 +13,7 @@ extern void usb_disable_device (struct usb_device *dev, int skip_ep0); extern int usb_get_device_descriptor(struct usb_device *dev, unsigned int size); +extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern void usb_lock_all_devices(void); diff --git a/include/linux/usb.h b/include/linux/usb.h index c500d6b5a16d..748d04385256 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -231,7 +231,7 @@ struct usb_interface_cache { struct usb_host_config { struct usb_config_descriptor desc; - char *string; + char *string; /* iConfiguration string, if present */ /* the interfaces associated with this configuration, * stored in no particular order */ struct usb_interface *interface[USB_MAXINTERFACES]; @@ -351,9 +351,11 @@ struct usb_device { int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ - char *product; - char *manufacturer; - char *serial; /* static strings from the device */ + /* static strings from the device */ + char *product; /* iProduct string, if present */ + char *manufacturer; /* iManufacturer string, if present */ + char *serial; /* iSerialNumber string, if present */ + struct list_head filelist; struct class_device *class_dev; struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ -- cgit v1.2.3 From db2d55b7f7f11823b8d2e5f0c706c7a264320d1b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 23 Oct 2005 23:04:25 -0700 Subject: [PATCH] USB: fix pm patches with CONFIG_PM off part 1 With CONFIG_PM=n: drivers/built-in.o(.text+0x2a69c): In function `ohci_hub_control': drivers/usb/host/ohci-hub.c:539: undefined reference to `.usb_hcd_resume_root_hub' drivers/built-in.o(.text+0x2b920): In function `ohci_irq': drivers/usb/host/ohci-hcd.c:726: undefined reference to `.usb_hcd_resume_root_hub' Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index a5d92943ff95..24a62a2ff86d 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -351,9 +351,6 @@ extern long usb_calc_bus_time (int speed, int is_input, extern struct usb_bus *usb_alloc_bus (struct usb_operations *); -extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); -extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); - extern void usb_set_device_state(struct usb_device *udev, enum usb_device_state new_state); @@ -376,9 +373,21 @@ extern int usb_find_interface_driver (struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) #ifdef CONFIG_PM +extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); +extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); extern int hcd_bus_suspend (struct usb_bus *bus); extern int hcd_bus_resume (struct usb_bus *bus); #else +static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd) +{ + return; +} + +static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) +{ + return; +} + static inline int hcd_bus_suspend(struct usb_bus *bus) { return 0; -- cgit v1.2.3 From 9a7834d06d553d02cc6e659e94772f69a8b5367f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 23 Oct 2005 23:02:20 -0700 Subject: [PATCH] USB: fix pm patches with CONFIG_PM off part 2 With CONFIG_PM=n: drivers/built-in.o(.text+0x1098c): In function `hub_thread': drivers/usb/core/hub.c:2673: undefined reference to `.dpm_runtime_resume' drivers/built-in.o(.text+0x10998):drivers/usb/core/hub.c:2674: undefined reference to `.dpm_runtime_resume' Please, never ever ever put extern decls into .c files. Use the darn header files :( Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/base/power/power.h | 13 ------------- drivers/usb/core/hub.c | 2 -- include/linux/pm.h | 13 +++++++++++++ 3 files changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 2e700d795cf1..fb3d35a9e101 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -67,9 +67,6 @@ extern int suspend_device(struct device *, pm_message_t); * runtime.c */ -extern int dpm_runtime_suspend(struct device *, pm_message_t); -extern void dpm_runtime_resume(struct device *); - #else /* CONFIG_PM */ @@ -82,14 +79,4 @@ static inline void device_pm_remove(struct device * dev) } -static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state) -{ - return 0; -} - -static inline void dpm_runtime_resume(struct device * dev) -{ - -} - #endif diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1bacb374b007..9660a8909b7c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2652,8 +2652,6 @@ static void hub_events(void) * stub "device" node was never suspended. */ if (i) { - extern void dpm_runtime_resume(struct device *); - dpm_runtime_resume(&hdev->dev); dpm_runtime_resume(&intf->dev); } diff --git a/include/linux/pm.h b/include/linux/pm.h index 83bae1cbe55b..c61d5de837ef 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -243,6 +243,9 @@ extern int device_suspend(pm_message_t state); #define device_may_wakeup(dev) \ (device_can_wakeup(dev) && (dev)->power.should_wakeup) +extern int dpm_runtime_suspend(struct device *, pm_message_t); +extern void dpm_runtime_resume(struct device *); + #else /* !CONFIG_PM */ static inline int device_suspend(pm_message_t state) @@ -253,6 +256,16 @@ static inline int device_suspend(pm_message_t state) #define device_set_wakeup_enable(dev,val) do{}while(0) #define device_may_wakeup(dev) (0) +static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state) +{ + return 0; +} + +static inline void dpm_runtime_resume(struct device * dev) +{ + +} + #endif /* changes to device_may_wakeup take effect on the next pm state change. -- cgit v1.2.3 From 46a0cf81828535fb3c200bc4fffdb8d69f4bf396 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 26 Oct 2005 19:42:53 +0200 Subject: [PATCH] USB: fix correct wording in drivers/usb/net/KConfig Signed-off-by: Koen Kooi --- drivers/usb/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index 8c010bb44eb8..efd6ca7e4ac5 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -294,7 +294,7 @@ config USB_NET_ZAURUS This also supports some related device firmware, as used in some PDAs from Olympus and some cell phones from Motorola. - If you install an alternate ROM image, such as the Linux 2.6 based + If you install an alternate image, such as the Linux 2.6 based versions of OpenZaurus, you should no longer need to support this protocol. Only the "eth-fd" or "net_fd" drivers in these devices really need this non-conformant variant of CDC Ethernet (or in -- cgit v1.2.3 From bde621854f1958a6000834c7c089b528118e5a9a Mon Sep 17 00:00:00 2001 From: Martin Hagelin Date: Wed, 26 Oct 2005 21:10:41 +0200 Subject: [PATCH] USB: add new device id to ftdi_sio module This is a patch to get the ELV FHZ1000 Home Automation control device to work with Linux. The patch adds a new device ID to the ftdi_sio driver. It is for kernel version 2.6.13.4. Signed-off-by: Martin Hagelin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 77d54ac39a0e..61204bf7cd78 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -412,6 +412,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module @@ -429,7 +430,6 @@ static struct usb_device_id id_table_combined [] = { /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */ - /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */ -- cgit v1.2.3 From 50260b69bbec383058875de26dbde28b1a6f8d00 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: add nokia_dku2 driver This driver comes from the gnokii project. Was further cleaned up by me to match recent usb-serial core changes. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 9 +++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/nokia_dku2.c | 142 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 152 insertions(+) create mode 100644 drivers/usb/serial/nokia_dku2.c (limited to 'drivers') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9438909e87a5..7b5e8e4ee2bb 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -394,6 +394,15 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_NOKIA_DKU2 + tristate "USB Nokia DKU2 Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Nokia DKU2 device. + + To compile this driver as a module, choose M here: the + module will be called nokia_dku2. + config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 6c7cdcc99a9e..55fd461793b7 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c new file mode 100644 index 000000000000..fad01bef3a64 --- /dev/null +++ b/drivers/usb/serial/nokia_dku2.c @@ -0,0 +1,142 @@ +/* + * Nokia DKU2 USB driver + * + * Copyright (C) 2004 + * Author: C Kemp + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * 20.09.2005 - Matthias Blaesing + * Added short name to device structure to make driver load into kernel 2.6.13 + * + * 20.09.2005 - Matthias Blaesing + * Added usb_deregister to exit code - to allow remove and reinsert of module + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "usb-serial.h" + + +#define NOKIA_VENDOR_ID 0x0421 +#define NOKIA7600_PRODUCT_ID 0x0400 +#define NOKIA6230_PRODUCT_ID 0x040f +#define NOKIA6170_PRODUCT_ID 0x0416 +#define NOKIA6670_PRODUCT_ID 0x041d +#define NOKIA6680_PRODUCT_ID 0x041e +#define NOKIA6230i_PRODUCT_ID 0x0428 + +#define NOKIA_AT_PORT 0x82 +#define NOKIA_FBUS_PORT 0x86 + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.2" +#define DRIVER_AUTHOR "C Kemp" +#define DRIVER_DESC "Nokia DKU2 Driver" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* The only thing which makes this device different from a generic + * device is that we have to set an alternative configuration to make + * the relevant endpoints available. In 2.6 this is really easy... */ +static int nokia_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int retval = -ENODEV; + + if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) { + /* the AT port */ + dev_info(&serial->dev->dev, "Nokia AT Port:\n"); + retval = 0; + } else if (serial->interface->num_altsetting == 2 && + serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) { + /* the FBUS port */ + dev_info(&serial->dev->dev, "Nokia FBUS Port:\n"); + usb_set_interface(serial->dev, 10, 1); + retval = 0; + } + + return retval; +} + +static struct usb_driver nokia_driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver nokia_serial_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + }, + .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver", + .id_table = id_table, + .num_interrupt_in = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .probe = nokia_probe, +}; + +static int __init nokia_init(void) +{ + int retval; + + retval = usb_serial_register(&nokia_serial_driver); + if (retval) + return retval; + + retval = usb_register(&nokia_driver); + if (retval) { + usb_serial_deregister(&nokia_serial_driver); + return retval; + } + + info(DRIVER_VERSION " " DRIVER_AUTHOR); + info(DRIVER_DESC); + + return retval; +} + +static void __exit nokia_exit(void) +{ + usb_deregister(&nokia_driver); + usb_serial_deregister(&nokia_serial_driver); +} + +module_init(nokia_init); +module_exit(nokia_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 4303fc6f055cf1a7ec63c3c3fd777b91b7d576f1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 28 Oct 2005 19:59:31 -0700 Subject: USB: fix up some odd parts due to partial merges Thanks to Andrew for doing the hard work on this. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- drivers/usb/host/ehci-pci.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9660a8909b7c..256d9f698715 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1674,7 +1674,7 @@ int usb_suspend_device(struct usb_device *udev) return 0; #endif } - +EXPORT_SYMBOL_GPL(usb_suspend_device); /* * If the USB "suspend" state is in use (rather than "global suspend"), diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 7872469ccbb1..145008853966 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -252,7 +252,7 @@ static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) (void) usb_suspend_device (hcd->self.root_hub); #else usb_lock_device (hcd->self.root_hub); - (void) ehci_hub_suspend (hcd); + (void) ehci_bus_suspend (hcd); usb_unlock_device (hcd->self.root_hub); #endif @@ -285,7 +285,7 @@ static int ehci_pci_resume (struct usb_hcd *hcd) continue; if (status & (PORT_SUSPEND | PORT_OWNER)) { down (&hcd->self.root_hub->serialize); - retval = ehci_hub_resume (hcd); + retval = ehci_bus_resume (hcd); up (&hcd->self.root_hub->serialize); break; } -- cgit v1.2.3 From 57725f0a94435355214977bb9b0e5089bba1b173 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 15:51:14 +0100 Subject: [ARM] Rename 'data' to 'plat' in sa1100 MTD map driver Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 6a8e0caf9fdc..1920bcbc05d7 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -130,7 +130,7 @@ struct sa_subdev_info { char name[16]; struct map_info map; struct mtd_info *mtd; - struct flash_platform_data *data; + struct flash_platform_data *plat; }; struct sa_info { @@ -143,7 +143,7 @@ struct sa_info { static void sa1100_set_vpp(struct map_info *map, int on) { struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map); - subdev->data->set_vpp(on); + subdev->plat->set_vpp(on); } static void sa1100_destroy_subdev(struct sa_subdev_info *subdev) @@ -187,7 +187,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r goto out; } - if (subdev->data->set_vpp) + if (subdev->plat->set_vpp) subdev->map.set_vpp = sa1100_set_vpp; subdev->map.phys = phys; @@ -204,7 +204,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r * Now let's probe for the actual flash. Do it here since * specific machine settings might have been set above. */ - subdev->mtd = do_map_probe(subdev->data->map_name, &subdev->map); + subdev->mtd = do_map_probe(subdev->plat->map_name, &subdev->map); if (subdev->mtd == NULL) { ret = -ENXIO; goto err; @@ -245,7 +245,7 @@ static void sa1100_destroy(struct sa_info *info) } static struct sa_info *__init -sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash) +sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) { struct sa_info *info; int nr, size, i, ret = 0; @@ -288,7 +288,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash subdev->map.name = subdev->name; sprintf(subdev->name, "sa1100-%d", i); - subdev->data = flash; + subdev->plat = plat; ret = sa1100_probe_subdev(subdev, res); if (ret) @@ -346,16 +346,16 @@ static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static int __init sa1100_mtd_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - struct flash_platform_data *flash = pdev->dev.platform_data; + struct flash_platform_data *plat = pdev->dev.platform_data; struct mtd_partition *parts; const char *part_type = NULL; struct sa_info *info; int err, nr_parts = 0; - if (!flash) + if (!plat) return -ENODEV; - info = sa1100_setup_mtd(pdev, flash); + info = sa1100_setup_mtd(pdev, plat); if (IS_ERR(info)) { err = PTR_ERR(info); goto out; @@ -372,8 +372,8 @@ static int __init sa1100_mtd_probe(struct device *dev) } else #endif { - parts = flash->parts; - nr_parts = flash->nr_parts; + parts = plat->parts; + nr_parts = plat->nr_parts; part_type = "static"; } -- cgit v1.2.3 From 0d2ef7d73e0b5173af3940139569bebd2375f441 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 15:57:20 +0100 Subject: [ARM] Add support for init/exit methods in sa1100 MTD map driver Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 1920bcbc05d7..50a1d434906a 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -223,7 +223,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r return ret; } -static void sa1100_destroy(struct sa_info *info) +static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *plat) { int i; @@ -242,6 +242,9 @@ static void sa1100_destroy(struct sa_info *info) for (i = info->num_subdev - 1; i >= 0; i--) sa1100_destroy_subdev(&info->subdev[i]); kfree(info); + + if (plat->exit) + plat->exit(); } static struct sa_info *__init @@ -275,6 +278,12 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) memset(info, 0, size); + if (plat->init) { + ret = plat->init(); + if (ret) + goto err; + } + /* * Claim and then map the memory regions. */ @@ -336,7 +345,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) return info; err: - sa1100_destroy(info); + sa1100_destroy(info, plat); out: return ERR_PTR(ret); } @@ -397,8 +406,11 @@ static int __init sa1100_mtd_probe(struct device *dev) static int __exit sa1100_mtd_remove(struct device *dev) { struct sa_info *info = dev_get_drvdata(dev); + struct flash_platform_data *plat = dev->platform_data; + dev_set_drvdata(dev, NULL); - sa1100_destroy(info); + sa1100_destroy(info, plat); + return 0; } -- cgit v1.2.3 From 822e5e72697ce06e4425c17d161b0482c7d9b6d4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:03:24 +0100 Subject: [ARM] Fix MTD device/partition destruction We should not delete MTD partitions when we registered a MTD device. Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 50a1d434906a..c38c2c311b8e 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -137,6 +137,7 @@ struct sa_info { struct mtd_partition *parts; struct mtd_info *mtd; int num_subdev; + unsigned int nr_parts; struct sa_subdev_info subdev[0]; }; @@ -228,8 +229,12 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla int i; if (info->mtd) { - del_mtd_partitions(info->mtd); - + if (info->nr_parts == 0) + del_mtd_device(info->mtd); +#ifdef CONFIG_MTD_PARTITIONS + else + del_mtd_partitions(info->mtd); +#endif #ifdef CONFIG_MTD_CONCAT if (info->mtd != info->subdev[0].mtd) mtd_concat_destroy(info->mtd); @@ -396,6 +401,8 @@ static int __init sa1100_mtd_probe(struct device *dev) add_mtd_partitions(info->mtd, parts, nr_parts); } + info->nr_parts = nr_parts; + dev_set_drvdata(dev, info); err = 0; -- cgit v1.2.3 From 14e66f767f5e8d023e098b475dc24ddc9a5dbdfd Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:08:31 +0100 Subject: [ARM] Allow MTD device name to be passed via platform data Allow SA1100 devices to pass the name of the flash device to the SA1100 map driver. Signed-off-by: Russell King --- arch/arm/mach-sa1100/generic.c | 2 ++ drivers/mtd/maps/sa1100-flash.c | 6 +++--- include/asm-arm/mach/flash.h | 2 ++ 3 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 93619497779c..f94b0fbcdcc8 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include "generic.h" @@ -283,6 +284,7 @@ static struct platform_device sa11x0mtd_device = { void sa11x0_set_flash_data(struct flash_platform_data *flash, struct resource *res, int nr) { + flash->name = "sa1100"; sa11x0mtd_device.dev.platform_data = flash; sa11x0mtd_device.resource = res; sa11x0mtd_device.num_resources = nr; diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index c38c2c311b8e..acf01ef9b575 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -301,7 +301,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) break; subdev->map.name = subdev->name; - sprintf(subdev->name, "sa1100-%d", i); + sprintf(subdev->name, "%s-%d", plat->name, i); subdev->plat = plat; ret = sa1100_probe_subdev(subdev, res); @@ -323,7 +323,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) * otherwise fail. Either way, it'll be called "sa1100". */ if (info->num_subdev == 1) { - strcpy(info->subdev[0].name, "sa1100"); + strcpy(info->subdev[0].name, plat->name); info->mtd = info->subdev[0].mtd; ret = 0; } else if (info->num_subdev > 1) { @@ -336,7 +336,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) cdev[i] = info->subdev[i].mtd; info->mtd = mtd_concat_create(cdev, info->num_subdev, - "sa1100"); + plat->name); if (info->mtd == NULL) ret = -ENXIO; #else diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h index a92887d4b2cb..cd57436d9874 100644 --- a/include/asm-arm/mach/flash.h +++ b/include/asm-arm/mach/flash.h @@ -14,6 +14,7 @@ struct mtd_partition; /* * map_name: the map probe function name + * name: flash device name (eg, as used with mtdparts=) * width: width of mapped device * init: method called at driver/device initialisation * exit: method called at driver/device removal @@ -23,6 +24,7 @@ struct mtd_partition; */ struct flash_platform_data { const char *map_name; + const char *name; unsigned int width; int (*init)(void); void (*exit)(void); -- cgit v1.2.3 From 13bfb34c10fae6016710f5f070043c8b94b40583 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:14:08 +0100 Subject: [ARM] Fix Assabet reboot with SA1100 MTD map driver Unfortunately, some devices forgot to reset the flash on reboot. Arrange for the map driver to suspend & resume the flash to ensure that it is in a sane state before rebooting. Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index acf01ef9b575..c81bec7b14d5 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -440,9 +440,17 @@ static int sa1100_mtd_resume(struct device *dev) info->mtd->resume(info->mtd); return 0; } + +static void sa1100_mtd_shutdown(struct device *dev) +{ + struct sa_info *info = dev_get_drvdata(dev); + if (info && info->mtd->suspend(info->mtd) == 0) + info->mtd->resume(info->mtd); +} #else #define sa1100_mtd_suspend NULL #define sa1100_mtd_resume NULL +#define sa1100_mtd_shutdown NULL #endif static struct device_driver sa1100_mtd_driver = { @@ -452,6 +460,7 @@ static struct device_driver sa1100_mtd_driver = { .remove = __exit_p(sa1100_mtd_remove), .suspend = sa1100_mtd_suspend, .resume = sa1100_mtd_resume, + .shutdown = sa1100_mtd_shutdown, }; static int __init sa1100_mtd_init(void) -- cgit v1.2.3 From 47e627ce83b6df9f4bb8e4b0a4dde1c5d7a4c929 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 29 Oct 2005 18:18:42 +0900 Subject: [PATCH] blk: fix merge bug in as-iosched as-iosched deals with aliased requests differently from other ioscheds. It links together aliased requests using rq->queuelist instead of spilling alises to dispatch queue like other ioscheds do. Requests linked in this way cannot be merged. Unfortunately, generic q->last_merge handling patch didn't take this into account and q->last_merge could be set to an aliased request resulting in Badness, corrupt list and eventually panic. This explicitly marks aliased requests to be unmergeable. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds --- drivers/block/as-iosched.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 4081c36c8c19..564172234819 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -1344,6 +1344,7 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia * Don't want to have to handle merges. */ as_del_arq_hash(arq); + arq->request->flags |= REQ_NOMERGE; } /* -- cgit v1.2.3 From 7533624527b9afa5585ca43ba534758052d848e5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:36:27 +0100 Subject: [PATCH] s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/s2io.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index d303d162974f..62d5041845e3 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3045,7 +3045,7 @@ int s2io_set_swapper(nic_t * sp) int wait_for_msix_trans(nic_t *nic, int i) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int ret = 0, cnt = 0; @@ -3066,7 +3066,7 @@ int wait_for_msix_trans(nic_t *nic, int i) void restore_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int i; @@ -3084,7 +3084,7 @@ void restore_xmsi_data(nic_t *nic) void store_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64, addr, data; int i; @@ -3107,7 +3107,7 @@ void store_xmsi_data(nic_t *nic) int s2io_enable_msi(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u16 msi_ctrl, msg_val; struct config_param *config = &nic->config; struct net_device *dev = nic->dev; @@ -3157,7 +3157,7 @@ int s2io_enable_msi(nic_t *nic) int s2io_enable_msi_x(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 tx_mat, rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; -- cgit v1.2.3 From 4b4a5eaedfc098d825d4c34cad1f1115802512b7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:38:44 +0100 Subject: [PATCH] sata_sil24 iomem annotations and fixes trivial iomem annotations + missing memcpy_fromio() caught by those Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/sata_sil24.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 32d730bd5bb6..51855d3bac64 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -220,8 +220,8 @@ struct sil24_port_priv { /* ap->host_set->private_data */ struct sil24_host_priv { - void *host_base; /* global controller control (128 bytes @BAR0) */ - void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ + void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ + void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ }; static u8 sil24_check_status(struct ata_port *ap); @@ -349,10 +349,12 @@ static struct ata_port_info sil24_port_info[] = { static inline void sil24_update_tf(struct ata_port *ap) { struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; - struct sil24_prb *prb = port; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_prb __iomem *prb = port; + u8 fis[6 * 4]; - ata_tf_from_fis(prb->fis, &pp->tf); + memcpy_fromio(fis, prb->fis, 6 * 4); + ata_tf_from_fis(fis, &pp->tf); } static u8 sil24_check_status(struct ata_port *ap) @@ -376,9 +378,9 @@ static int sil24_scr_map[] = { static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; return readl(scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -387,9 +389,9 @@ static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -454,7 +456,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); @@ -467,7 +469,7 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static int __sil24_reset_controller(void *port) +static int __sil24_reset_controller(void __iomem *port) { int cnt; u32 tmp; @@ -493,7 +495,7 @@ static void sil24_reset_controller(struct ata_port *ap) { printk(KERN_NOTICE DRV_NAME " ata%u: resetting controller...\n", ap->id); - if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr)) printk(KERN_ERR DRV_NAME " ata%u: failed to reset controller\n", ap->id); } @@ -527,7 +529,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -574,7 +576,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -689,7 +691,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; - void *host_base = NULL, *port_base = NULL; + void __iomem *host_base = NULL; + void __iomem *port_base = NULL; int i, rc; if (!printed_version++) @@ -771,7 +774,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { - void *port = port_base + i * PORT_REGS_SIZE; + void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; u32 tmp; int cnt; -- cgit v1.2.3 From 2d3c0b7bedfd7a8e1870a046a434bd467e7c5349 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:46:03 +0100 Subject: [PATCH] missing include in infiniband use of IS_ERR/PTR_ERR in infiniband/core/agent.c, without a portable chain of includes pulling err.h (breaks on a bunch of platforms). Signed-off-by: Al Viro Acked-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/core/agent.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h index c5f3cfec942a..86d72fab37b0 100644 --- a/drivers/infiniband/core/agent.h +++ b/drivers/infiniband/core/agent.h @@ -39,6 +39,7 @@ #ifndef __AGENT_H_ #define __AGENT_H_ +#include #include extern int ib_agent_port_open(struct ib_device *device, int port_num); -- cgit v1.2.3 From f6b52e85a5d022008fe9f99eab7c9f41f155e3cd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 07:06:59 +0100 Subject: [PATCH] arguments out of order in class_device_create() call (s390) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/s390/char/vmlogrdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index a107fec4457a..b2d75de144c6 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -787,8 +787,8 @@ vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) { return ret; } priv->class_device = class_device_create( - NULL, vmlogrdr_class, + NULL, MKDEV(vmlogrdr_major, priv->minor_num), dev, "%s", dev->bus_id ); -- cgit v1.2.3 From 9d86b7d37018c917837477dd4501d44bf8f3f98c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 07:08:49 +0100 Subject: [PATCH] missing bits in sparkspkr conversion Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/input/misc/sparcspkr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index 5778220a18d2..29d97b12be7a 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -143,7 +143,7 @@ static int __init init_isa_beep(struct sparc_isa_device *isa_dev) sparcspkr_dev->name = "Sparc ISA Speaker"; sparcspkr_dev->event = isa_spkr_event; - input_register_device(&sparcspkr_dev); + input_register_device(sparcspkr_dev); return 0; } -- cgit v1.2.3 From 32b32c2c3566b206988fa30336ec6534759823b5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 11:49:33 +0100 Subject: [PATCH] amikbd fix it's input_allocate_device(), not input_dev_allocate()... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/input/keyboard/amikbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c index 3d63bc1ad322..4c8fb1f8631f 100644 --- a/drivers/input/keyboard/amikbd.c +++ b/drivers/input/keyboard/amikbd.c @@ -199,7 +199,7 @@ static int __init amikbd_init(void) if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb")) return -EBUSY; - amikbd_dev = input_dev_allocate(); + amikbd_dev = input_allocate_device(); if (!amikbd_dev) { printk(KERN_ERR "amikbd: not enough memory for input device\n"); release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100); -- cgit v1.2.3 From 018a2cdf1e633497bb4f01eb86a7cbffa611776d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 11:56:13 +0100 Subject: [PATCH] idmouse cleanup and overflow fix switched to simple_read_from_buffer(), killed broken use of min(). Incidentally, that use of min() had been fixed once, only to be reintroduced in commit 4244f72436ab77c3c29a6447af81734ab3925d85: [PATCH] USB: upgrade of the idmouse driver [snip] - if (count > IMGSIZE - *ppos) - count = IMGSIZE - *ppos; + count = min ((loff_t)count, IMGSIZE - (*ppos)); Note the lovely use of cast to shut the warning about misuse of min() up... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/misc/idmouse.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 3944a55ed74c..1dc3e0f73014 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -319,20 +319,8 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count return -ENODEV; } - if (*ppos >= IMGSIZE) { - up (&dev->sem); - return 0; - } - - count = min ((loff_t)count, IMGSIZE - (*ppos)); - - if (copy_to_user (buffer, dev->bulk_in_buffer + *ppos, count)) { - result = -EFAULT; - } else { - result = count; - *ppos += count; - } - + result = simple_read_from_buffer(buffer, count, ppos, + dev->bulk_in_buffer, IMGSIZE); /* unlock the device */ up(&dev->sem); return result; -- cgit v1.2.3 From ac19bff25b6834d858274406a686f2227dd8489d Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 29 Oct 2005 13:58:21 -0400 Subject: [libata] ensure ->tf_read() hook reads Status and Error registers We want ->tf_read() to get a complete snapshot of all taskfile registers, without requiring the callers to manually call ata_chk_status() and ata_chk_err() themselves. This also fixes a minor bug in sata_vsc where the lower bits of the feature register were incorrectly placed in the HOB (high order bits) portion of struct ata_taskfile. --- drivers/scsi/libata-core.c | 4 ++++ drivers/scsi/pdc_adma.c | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_svw.c | 22 ++++++++++++++++------ drivers/scsi/sata_vsc.c | 20 ++++++++++++++------ 5 files changed, 36 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f53d7b8ac33f..56c81f0aa1d9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -370,6 +370,8 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; + tf->command = ata_check_status(ap); + tf->feature = ata_chk_err(ap); tf->nsect = inb(ioaddr->nsect_addr); tf->lbal = inb(ioaddr->lbal_addr); tf->lbam = inb(ioaddr->lbam_addr); @@ -402,6 +404,8 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; + tf->command = ata_check_status(ap); + tf->feature = ata_chk_err(ap); tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 7999817915c3..af99feb9d237 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -490,7 +490,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) if (qc && (!(qc->tf.ctl & ATA_NIEN))) { /* check main status, clearing INTRQ */ - u8 status = ata_chk_status(ap); + u8 status = ata_check_status(ap); if ((status & ATA_BUSY)) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 250dafa6bc36..1aaf3304d397 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -433,7 +433,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) if (qc && (!(qc->tf.ctl & ATA_NIEN))) { /* check main status, clearing INTRQ */ - u8 status = ata_chk_status(ap); + u8 status = ata_check_status(ap); if ((status & ATA_BUSY)) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index e0f9570bc6dd..46208f52d0e1 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -84,6 +84,8 @@ /* Port stride */ #define K2_SATA_PORT_OFFSET 0x100 +static u8 k2_stat_check_status(struct ata_port *ap); + static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { @@ -136,16 +138,24 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah; + u16 nsect, lbal, lbam, lbah, feature; - nsect = tf->nsect = readw(ioaddr->nsect_addr); - lbal = tf->lbal = readw(ioaddr->lbal_addr); - lbam = tf->lbam = readw(ioaddr->lbam_addr); - lbah = tf->lbah = readw(ioaddr->lbah_addr); + tf->command = k2_stat_check_status(ap); tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = readw(ioaddr->error_addr) >> 8; + tf->hob_feature = feature >> 8; tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 5af05fdf8544..54273e0063c7 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -153,16 +153,24 @@ static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah; + u16 nsect, lbal, lbam, lbah, feature; - nsect = tf->nsect = readw(ioaddr->nsect_addr); - lbal = tf->lbal = readw(ioaddr->lbal_addr); - lbam = tf->lbam = readw(ioaddr->lbam_addr); - lbah = tf->lbah = readw(ioaddr->lbah_addr); + tf->command = ata_check_status(ap); tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = readb(ioaddr->error_addr); + tf->hob_feature = feature >> 8; tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; -- cgit v1.2.3 From 57f3bda88a5e5a2810016820a932cb82931dcb1c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 28 Oct 2005 20:37:23 -0700 Subject: [PATCH] libata-core cleanups (updated) libata-core cleanups: - use kzalloc() instead of kmalloc() + memset(); - use one exit path in ata_device_add(); Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 56c81f0aa1d9..b1b1c6f01419 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4258,11 +4258,10 @@ int ata_device_add(const struct ata_probe_ent *ent) DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ - host_set = kmalloc(sizeof(struct ata_host_set) + + host_set = kzalloc(sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)), GFP_KERNEL); if (!host_set) return 0; - memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *))); spin_lock_init(&host_set->lock); host_set->dev = dev; @@ -4302,10 +4301,8 @@ int ata_device_add(const struct ata_probe_ent *ent) count++; } - if (!count) { - kfree(host_set); - return 0; - } + if (!count) + goto err_free_ret; /* obtain irq, that is shared between channels */ if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, @@ -4363,6 +4360,7 @@ err_out: ata_host_remove(host_set->ports[i], 1); scsi_host_put(host_set->ports[i]->host); } +err_free_ret: kfree(host_set); VPRINTK("EXIT, returning 0\n"); return 0; @@ -4472,15 +4470,13 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (!probe_ent) { printk(KERN_ERR DRV_NAME "(%s): out of memory\n", kobject_name(&(dev->kobj))); return NULL; } - memset(probe_ent, 0, sizeof(*probe_ent)); - INIT_LIST_HEAD(&probe_ent->node); probe_ent->dev = dev; -- cgit v1.2.3 From 2ab540becd1bcf9c6886370fd8c67e56dd1c9f3a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:38:44 +0100 Subject: [PATCH] sata_sil24 iomem annotations and fixes trivial iomem annotations + missing memcpy_fromio() caught by those Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 32d730bd5bb6..51855d3bac64 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -220,8 +220,8 @@ struct sil24_port_priv { /* ap->host_set->private_data */ struct sil24_host_priv { - void *host_base; /* global controller control (128 bytes @BAR0) */ - void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ + void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ + void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ }; static u8 sil24_check_status(struct ata_port *ap); @@ -349,10 +349,12 @@ static struct ata_port_info sil24_port_info[] = { static inline void sil24_update_tf(struct ata_port *ap) { struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; - struct sil24_prb *prb = port; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_prb __iomem *prb = port; + u8 fis[6 * 4]; - ata_tf_from_fis(prb->fis, &pp->tf); + memcpy_fromio(fis, prb->fis, 6 * 4); + ata_tf_from_fis(fis, &pp->tf); } static u8 sil24_check_status(struct ata_port *ap) @@ -376,9 +378,9 @@ static int sil24_scr_map[] = { static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; return readl(scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -387,9 +389,9 @@ static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -454,7 +456,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); @@ -467,7 +469,7 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static int __sil24_reset_controller(void *port) +static int __sil24_reset_controller(void __iomem *port) { int cnt; u32 tmp; @@ -493,7 +495,7 @@ static void sil24_reset_controller(struct ata_port *ap) { printk(KERN_NOTICE DRV_NAME " ata%u: resetting controller...\n", ap->id); - if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr)) printk(KERN_ERR DRV_NAME " ata%u: failed to reset controller\n", ap->id); } @@ -527,7 +529,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -574,7 +576,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -689,7 +691,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; - void *host_base = NULL, *port_base = NULL; + void __iomem *host_base = NULL; + void __iomem *port_base = NULL; int i, rc; if (!printed_version++) @@ -771,7 +774,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { - void *port = port_base + i * PORT_REGS_SIZE; + void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; u32 tmp; int cnt; -- cgit v1.2.3 From f9a5f7d3f3319aac02a7a36a2fea10bd33c3d16a Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 29 Oct 2005 15:09:26 +0200 Subject: [PATCH] drivers/net/tg3: Use the DMA_{32,64}BIT_MASK constants This one from my DMA_{32,64}BIT_MASK series did not seem to make it through to upstream. Use the DMA_{32,64}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b547233ad9f7..1828a6bf8458 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -10522,17 +10523,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, } /* Configure DMA attributes. */ - err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL); + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); if (!err) { pci_using_dac = 1; - err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { printk(KERN_ERR PFX "Unable to obtain 64 bit DMA " "for consistent allocations\n"); goto err_out_free_res; } } else { - err = pci_set_dma_mask(pdev, 0xffffffffULL); + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { printk(KERN_ERR PFX "No usable DMA configuration, " "aborting.\n"); -- cgit v1.2.3 From eef55ac7bf16669cb022db30143d0a6d8cb1f5e6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:36:27 +0100 Subject: [PATCH] s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 5ea897714a14..3f5e93aad5c7 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3044,7 +3044,7 @@ int s2io_set_swapper(nic_t * sp) int wait_for_msix_trans(nic_t *nic, int i) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int ret = 0, cnt = 0; @@ -3065,7 +3065,7 @@ int wait_for_msix_trans(nic_t *nic, int i) void restore_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int i; @@ -3083,7 +3083,7 @@ void restore_xmsi_data(nic_t *nic) void store_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64, addr, data; int i; @@ -3106,7 +3106,7 @@ void store_xmsi_data(nic_t *nic) int s2io_enable_msi(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u16 msi_ctrl, msg_val; struct config_param *config = &nic->config; struct net_device *dev = nic->dev; @@ -3156,7 +3156,7 @@ int s2io_enable_msi(nic_t *nic) int s2io_enable_msi_x(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 tx_mat, rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; -- cgit v1.2.3 From e71180f3689e00c5a1095925352a72dacdd62e34 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Sat, 29 Oct 2005 13:31:39 +0100 Subject: [PATCH] prism54: Free skb after disabling interrupts The dev_kfree_skb in islpci_eth_transmit happens while irqs are still disabled, so either dev_kfree_skb_irq needs to be used or the skb needs to be freed after irqs have been enabled again. This patch should fix it. Signed-off-by: Patrick McHardy Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/net/wireless/prism54/islpci_eth.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 0975dd4ed77d..3b49efa37ee5 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -241,12 +241,10 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) return 0; drop_free: - /* free the skbuf structure before aborting */ - dev_kfree_skb(skb); - skb = NULL; - priv->statistics.tx_dropped++; spin_unlock_irqrestore(&priv->slock, flags); + dev_kfree_skb(skb); + skb = NULL; return err; } -- cgit v1.2.3 From c4ed38a0c6e2e5c4906296758f816ee71373792f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Feb 2005 16:18:36 +0000 Subject: Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 1 + arch/mips/cobalt/Makefile | 2 +- arch/mips/cobalt/int-handler.S | 4 +- arch/mips/cobalt/irq.c | 111 ++++++++++++++++++++++----------- arch/mips/cobalt/promcon.c | 87 -------------------------- arch/mips/cobalt/reset.c | 59 +++++++++--------- arch/mips/cobalt/setup.c | 100 ++++++++++++++++++++--------- arch/mips/pci/fixup-cobalt.c | 55 +++++++++++++++- arch/mips/pci/ops-gt64111.c | 10 +-- drivers/char/lcd.c | 4 +- drivers/char/lcd.h | 2 +- include/asm-mips/cobalt/cobalt.h | 52 +++++++++++---- include/asm-mips/cobalt/mach-gt64120.h | 1 + include/asm-mips/serial.h | 11 ---- 14 files changed, 276 insertions(+), 223 deletions(-) delete mode 100644 arch/mips/cobalt/promcon.c create mode 100644 include/asm-mips/cobalt/mach-gt64120.h (limited to 'drivers') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index dbd79bef34a0..5f2dfcddb9f2 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -323,6 +323,7 @@ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # Cobalt Server # core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ +cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 # diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index a5e6554b2326..3b6b7579d1de 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,6 +2,6 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := irq.o int-handler.o reset.o setup.o promcon.o +obj-y := irq.o int-handler.o reset.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S index 1a21dec1b3ca..f92608e8d84f 100644 --- a/arch/mips/cobalt/int-handler.S +++ b/arch/mips/cobalt/int-handler.S @@ -18,8 +18,8 @@ SAVE_ALL CLI - la ra, ret_from_irq - move a1, sp + PTR_LA ra, ret_from_irq + move a0, sp j cobalt_irq END(cobalt_handle_int) diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index 6d2a81581397..0d90851f925e 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include #include @@ -25,8 +27,8 @@ extern void cobalt_handle_int(void); * the CPU interrupt lines, and ones that come in on the via chip. The CPU * mappings are: * - * 16, - Software interrupt 0 (unused) IE_SW0 - * 17 - Software interrupt 1 (unused) IE_SW0 + * 16 - Software interrupt 0 (unused) IE_SW0 + * 17 - Software interrupt 1 (unused) IE_SW1 * 18 - Galileo chip (timer) IE_IRQ0 * 19 - Tulip 0 + NCR SCSI IE_IRQ1 * 20 - Tulip 1 IE_IRQ2 @@ -42,61 +44,94 @@ extern void cobalt_handle_int(void); * 15 - IDE1 */ -asmlinkage void cobalt_irq(struct pt_regs *regs) +static inline void galileo_irq(struct pt_regs *regs) { - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP2) { /* int 18 */ - unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS); - - /* Check for timer irq ... */ - if (irq_src & GALILEO_T0EXP) { - /* Clear the int line */ - GALILEO_OUTL(0, GT_INTRCAUSE_OFS); - do_IRQ(COBALT_TIMER_IRQ, regs); - } - return; - } + unsigned int mask, pending, devfn; - if (pending & CAUSEF_IP6) { /* int 22 */ - int irq = i8259_irq(); + mask = GALILEO_INL(GT_INTRMASK_OFS); + pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask; - if (irq >= 0) - do_IRQ(irq, regs); - return; - } + if (pending & GALILEO_INTR_T0EXP) { - if (pending & CAUSEF_IP3) { /* int 19 */ - do_IRQ(COBALT_ETH0_IRQ, regs); - return; - } + GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS); + do_IRQ(COBALT_GALILEO_IRQ, regs); - if (pending & CAUSEF_IP4) { /* int 20 */ - do_IRQ(COBALT_ETH1_IRQ, regs); - return; - } + } else if (pending & GALILEO_INTR_RETRY_CTR) { - if (pending & CAUSEF_IP5) { /* int 21 */ - do_IRQ(COBALT_SERIAL_IRQ, regs); - return; - } + devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8; + GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS); + printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n", + PCI_SLOT(devfn), PCI_FUNC(devfn)); + + } else { - if (pending & CAUSEF_IP7) { /* int 23 */ - do_IRQ(COBALT_QUBE_SLOT_IRQ, regs); - return; + GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS); + printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending); } } +static inline void via_pic_irq(struct pt_regs *regs) +{ + int irq; + + irq = i8259_irq(); + if (irq >= 0) + do_IRQ(irq, regs); +} + +asmlinkage void cobalt_irq(struct pt_regs *regs) +{ + unsigned pending; + + pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP2) /* COBALT_GALILEO_IRQ (18) */ + + galileo_irq(regs); + + else if (pending & CAUSEF_IP6) /* COBALT_VIA_IRQ (22) */ + + via_pic_irq(regs); + + else if (pending & CAUSEF_IP3) /* COBALT_ETH0_IRQ (19) */ + + do_IRQ(COBALT_CPU_IRQ + 3, regs); + + else if (pending & CAUSEF_IP4) /* COBALT_ETH1_IRQ (20) */ + + do_IRQ(COBALT_CPU_IRQ + 4, regs); + + else if (pending & CAUSEF_IP5) /* COBALT_SERIAL_IRQ (21) */ + + do_IRQ(COBALT_CPU_IRQ + 5, regs); + + else if (pending & CAUSEF_IP7) /* IRQ 23 */ + + do_IRQ(COBALT_CPU_IRQ + 7, regs); +} + +static struct irqaction irq_via = { + no_action, 0, { { 0, } }, "cascade", NULL, NULL +}; + void __init arch_init_irq(void) { + /* + * Mask all Galileo interrupts. The Galileo + * handler is set in cobalt_timer_setup() + */ + GALILEO_OUTL(0, GT_INTRMASK_OFS); + set_except_vector(0, cobalt_handle_int); init_i8259_irqs(); /* 0 ... 15 */ - mips_cpu_irq_init(16); /* 16 ... 23 */ + mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ /* * Mask all cpu interrupts * (except IE4, we already masked those at VIA level) */ change_c0_status(ST0_IM, IE_IRQ4); + + setup_irq(COBALT_VIA_IRQ, &irq_via); } diff --git a/arch/mips/cobalt/promcon.c b/arch/mips/cobalt/promcon.c deleted file mode 100644 index f03df761e9f1..000000000000 --- a/arch/mips/cobalt/promcon.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * PROM console for Cobalt Raq2 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997 by Ralf Baechle - * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv) - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -static unsigned long port = 0xc800000; - -static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr) -{ - char lsr; - - do { - lsr = inb(ioaddr + UART_LSR); - } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE)); - outb(ch, ioaddr + UART_TX); -} - -static __inline__ char ns16550_cons_get_char(unsigned long ioaddr) -{ - while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0) - udelay(1); - return inb(ioaddr + UART_RX); -} - -void ns16550_console_write(struct console *co, const char *s, unsigned count) -{ - char lsr, ier; - unsigned i; - - ier = inb(port + UART_IER); - outb(0x00, port + UART_IER); - for (i=0; i < count; i++, s++) { - - if(*s == '\n') - ns16550_cons_put_char('\r', port); - ns16550_cons_put_char(*s, port); - } - - do { - lsr = inb(port + UART_LSR); - } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE)); - - outb(ier, port + UART_IER); -} - -char getDebugChar(void) -{ - return ns16550_cons_get_char(port); -} - -void putDebugChar(char kgdb_char) -{ - ns16550_cons_put_char(kgdb_char, port); -} - -static struct console ns16550_console = { - .name = "prom", - .setup = NULL, - .write = ns16550_console_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init ns16550_setup_console(void) -{ - register_console(&ns16550_console); - - return 0; -} - -console_initcall(ns16550_setup_console); diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 084c8e59f42c..805a0e88507b 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -16,48 +16,45 @@ #include #include #include +#include -void cobalt_machine_restart(char *command) +void cobalt_machine_halt(void) { - *(volatile char *)0xbc000000 = 0x0f; + int state, last, diff; + unsigned long mark; /* - * Ouch, we're still alive ... This time we take the silver bullet ... - * ... and find that we leave the hardware in a state in which the - * kernel in the flush locks up somewhen during of after the PCI - * detection stuff. + * turn off bar on Qube, flash power off LED on RaQ (0.5Hz) + * + * restart if ENTER and SELECT are pressed */ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__( - "jr\t%0" - : - : "r" (0xbfc00000)); -} -extern int led_state; -#define kLED 0xBC000000 -#define LEDSet(x) (*(volatile unsigned char *) kLED) = (( unsigned char)x) + last = COBALT_KEY_PORT; -void cobalt_machine_halt(void) -{ - int mark; + for (state = 0;;) { + + state ^= COBALT_LED_POWER_OFF; + COBALT_LED_PORT = state; + + diff = COBALT_KEY_PORT ^ last; + last ^= diff; - /* Blink our cute? little LED (number 3)... */ - while (1) { - led_state = led_state | ( 1 << 3 ); - LEDSet(led_state); - mark = jiffies; - while (jiffies<(mark+HZ)); - led_state = led_state & ~( 1 << 3 ); - LEDSet(led_state); - mark = jiffies; - while (jiffies<(mark+HZ)); + if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT))) + COBALT_LED_PORT = COBALT_LED_RESET; + + for (mark = jiffies; jiffies - mark < HZ;) + ; } } +void cobalt_machine_restart(char *command) +{ + COBALT_LED_PORT = COBALT_LED_RESET; + + /* we should never get here */ + cobalt_machine_halt(); +} + /* * This triggers the luser mode device driver for the power switch ;-) */ diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index f8138c15a535..d358a118fa31 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include @@ -21,6 +23,7 @@ #include #include #include +#include #include @@ -30,45 +33,44 @@ extern void cobalt_machine_power_off(void); int cobalt_board_id; -static char my_cmdline[CL_SIZE] = { - "console=ttyS0,115200 " -#ifdef CONFIG_IP_PNP - "ip=on " -#endif -#ifdef CONFIG_ROOT_NFS - "root=/dev/nfs " -#else - "root=/dev/hda1 " -#endif - }; - const char *get_system_type(void) { + switch (cobalt_board_id) { + case COBALT_BRD_ID_QUBE1: + return "Cobalt Qube"; + case COBALT_BRD_ID_RAQ1: + return "Cobalt RaQ"; + case COBALT_BRD_ID_QUBE2: + return "Cobalt Qube2"; + case COBALT_BRD_ID_RAQ2: + return "Cobalt RaQ2"; + } return "MIPS Cobalt"; } static void __init cobalt_timer_setup(struct irqaction *irq) { - /* Load timer value for 150 Hz */ - GALILEO_OUTL(500000, GT_TC0_OFS); + /* Load timer value for 1KHz (TCLK is 50MHz) */ + GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS); - /* Register our timer interrupt */ - setup_irq(COBALT_TIMER_IRQ, irq); + /* Enable timer */ + GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS); - /* Enable timer ints */ - GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS); - /* Unmask timer int */ - GALILEO_OUTL(0x100, GT_INTRMASK_OFS); + /* Register interrupt */ + setup_irq(COBALT_GALILEO_IRQ, irq); + + /* Enable interrupt */ + GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS); } extern struct pci_ops gt64111_pci_ops; static struct resource cobalt_mem_resource = { - "GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM + "PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM }; static struct resource cobalt_io_resource = { - "GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO + "PCI I/O", 0x1000, 0xffff, IORESOURCE_IO }; static struct resource cobalt_io_resources[] = { @@ -86,11 +88,12 @@ static struct pci_controller cobalt_pci_controller = { .mem_resource = &cobalt_mem_resource, .mem_offset = 0, .io_resource = &cobalt_io_resource, - .io_offset = 0x00001000UL - GT64111_IO_BASE + .io_offset = 0 - GT64111_IO_BASE }; void __init plat_setup(void) { + static struct uart_port uart; unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0); int i; @@ -100,7 +103,10 @@ void __init plat_setup(void) board_timer_setup = cobalt_timer_setup; - set_io_port_base(KSEG1ADDR(GT64111_IO_BASE)); + set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE)); + + /* I/O port resource must include UART and LCD/buttons */ + ioport_resource.end = 0x0fffffff; /* * This is a prom style console. We just poke at the @@ -120,25 +126,61 @@ void __init plat_setup(void) cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8); cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id); + printk("Cobalt board ID: %d\n", cobalt_board_id); + #ifdef CONFIG_PCI register_pci_controller(&cobalt_pci_controller); #endif + +#ifdef CONFIG_SERIAL_8250 + if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { + + uart.line = 0; + uart.type = PORT_UNKNOWN; + uart.uartclk = 18432000; + uart.irq = COBALT_SERIAL_IRQ; + uart.flags = STD_COM_FLAGS; + uart.iobase = 0xc800000; + uart.iotype = UPIO_PORT; + + early_serial_setup(&uart); + } +#endif } /* * Prom init. We read our one and only communication with the firmware. - * Grab the amount of installed memory + * Grab the amount of installed memory. + * Better boot loaders (CoLo) pass a command line too :-) */ void __init prom_init(void) { - int argc = fw_arg0; - - strcpy(arcs_cmdline, my_cmdline); + int narg, indx, posn, nchr; + unsigned long memsz; + char **argv; mips_machgroup = MACH_GROUP_COBALT; - add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM); + memsz = fw_arg0 & 0x7fff0000; + narg = fw_arg0 & 0x0000ffff; + + if (narg) { + arcs_cmdline[0] = '\0'; + argv = (char **) fw_arg1; + posn = 0; + for (indx = 1; indx < narg; ++indx) { + nchr = strlen(argv[indx]); + if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline)) + break; + if (posn) + arcs_cmdline[posn++] = ' '; + strcpy(arcs_cmdline + posn, argv[indx]); + posn += nchr; + } + } + + add_memory_region(0x0, memsz, BOOT_MEM_RAM); } unsigned long __init prom_free_prom_memory(void) diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 57e1ca2116bb..909292f50d06 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -21,6 +21,20 @@ extern int cobalt_board_id; +static void qube_raq_galileo_early_fixup(struct pci_dev *dev) +{ + if (dev->devfn == PCI_DEVFN(0, 0) && + (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) { + + dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff); + + printk(KERN_INFO "Galileo: fixed bridge class\n"); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, + qube_raq_galileo_early_fixup); + static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) { unsigned short cfgword; @@ -48,6 +62,9 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) { unsigned short galileo_id; + if (dev->devfn != PCI_DEVFN(0, 0)) + return; + /* Fix PCI latency-timer and cache-line-size values in Galileo * host bridge. */ @@ -55,6 +72,13 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7); /* + * The code described by the comment below has been removed + * as it causes bus mastering by the Ethernet controllers + * to break under any kind of network load. We always set + * the retry timeouts to their maximum. + * + * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x-- + * * On all machines prior to Q2, we had the STOP line disconnected * from Galileo to VIA on PCI. The new Galileo does not function * correctly unless we have it connected. @@ -64,21 +88,43 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) */ pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id); galileo_id &= 0xff; /* mask off class info */ + + printk(KERN_INFO "Galileo: revision %u\n", galileo_id); + +#if 0 if (galileo_id >= 0x10) { /* New Galileo, assumes PCI stop line to VIA is connected. */ GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS); - } else if (galileo_id == 0x1 || galileo_id == 0x2) { + } else if (galileo_id == 0x1 || galileo_id == 0x2) +#endif + { signed int timeo; /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */ timeo = GALILEO_INL(GT_PCI0_TOR_OFS); /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */ - GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS); + GALILEO_OUTL( + (0xff << 16) | /* retry count */ + (0xff << 8) | /* timeout 1 */ + 0xff, /* timeout 0 */ + GT_PCI0_TOR_OFS); + + /* enable PCI retry exceeded interrupt */ + GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID, +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_fixup); +static char irq_tab_qube1[] __initdata = { + [COBALT_PCICONF_CPU] = 0, + [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ, + [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ, + [COBALT_PCICONF_VIA] = 0, + [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ, + [COBALT_PCICONF_ETH1] = 0 +}; + static char irq_tab_cobalt[] __initdata = { [COBALT_PCICONF_CPU] = 0, [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ, @@ -99,6 +145,9 @@ static char irq_tab_raq2[] __initdata = { int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + if (cobalt_board_id < COBALT_BRD_ID_QUBE2) + return irq_tab_qube1[slot]; + if (cobalt_board_id == COBALT_BRD_ID_RAQ2) return irq_tab_raq2[slot]; diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c index c5b0fc184c2a..c1807934768d 100644 --- a/arch/mips/pci/ops-gt64111.c +++ b/arch/mips/pci/ops-gt64111.c @@ -18,15 +18,15 @@ #include /* - * Accessing device 31 hangs the GT64120. Not sure if this will also hang - * the GT64111, let's be paranoid for now. + * Device 31 on the GT64111 is used to generate PCI special + * cycles, so we shouldn't expected to find a device there ... */ static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn) { - if (bus->number == 0 && devfn == PCI_DEVFN(31, 0)) - return -1; + if (bus->number == 0 && PCI_SLOT(devfn) < 31) + return 0; - return 0; + return -1; } static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn, diff --git a/drivers/char/lcd.c b/drivers/char/lcd.c index b77161146144..29963d8be667 100644 --- a/drivers/char/lcd.c +++ b/drivers/char/lcd.c @@ -575,8 +575,8 @@ static inline int button_pressed(void) static int lcd_waiters = 0; -static long lcd_read(struct inode *inode, struct file *file, char *buf, - unsigned long count) +static ssize_t lcd_read(struct file *file, char *buf, + size_t count, loff_t *ofs) { long buttons_now; diff --git a/drivers/char/lcd.h b/drivers/char/lcd.h index 878a95280e87..a8d4ae737158 100644 --- a/drivers/char/lcd.h +++ b/drivers/char/lcd.h @@ -22,7 +22,7 @@ static int timeout(volatile unsigned long); #define MAX_IDLE_TIME 120 struct lcd_display { - unsigned long buttons; + unsigned buttons; int size1; int size2; unsigned char line1[LCD_CHARS_PER_LINE]; diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/cobalt/cobalt.h index ca1fbc0579fe..78e1df2095fb 100644 --- a/include/asm-mips/cobalt/cobalt.h +++ b/include/asm-mips/cobalt/cobalt.h @@ -19,18 +19,23 @@ * 9 - PCI * 14 - IDE0 * 15 - IDE1 - * + */ +#define COBALT_QUBE_SLOT_IRQ 9 + +/* * CPU IRQs are 16 ... 23 */ -#define COBALT_TIMER_IRQ 18 -#define COBALT_SCC_IRQ 19 /* pre-production has 85C30 */ -#define COBALT_RAQ_SCSI_IRQ 19 -#define COBALT_ETH0_IRQ 19 -#define COBALT_ETH1_IRQ 20 -#define COBALT_SERIAL_IRQ 21 -#define COBALT_SCSI_IRQ 21 -#define COBALT_VIA_IRQ 22 /* Chained to VIA ISA bridge */ -#define COBALT_QUBE_SLOT_IRQ 23 +#define COBALT_CPU_IRQ 16 + +#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) +#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */ +#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3) +#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3) +#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4) +#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4) +#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5) +#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5) +#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */ /* * PCI configuration space manifest constants. These are wired into @@ -69,16 +74,21 @@ * Most of this really should go into a separate GT64111 header file. */ #define GT64111_IO_BASE 0x10000000UL +#define GT64111_IO_END 0x11ffffffUL +#define GT64111_MEM_BASE 0x12000000UL +#define GT64111_MEM_END 0x13ffffffUL #define GT64111_BASE 0x14000000UL -#define GALILEO_REG(ofs) (KSEG0 + GT64111_BASE + (unsigned long)(ofs)) +#define GALILEO_REG(ofs) CKSEG1ADDR(GT64111_BASE + (unsigned long)(ofs)) #define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port)) #define GALILEO_OUTL(val, port) \ do { \ - *(volatile unsigned int *) GALILEO_REG(port) = (port); \ + *(volatile unsigned int *) GALILEO_REG(port) = (val); \ } while (0) -#define GALILEO_T0EXP 0x0100 +#define GALILEO_INTR_T0EXP (1 << 8) +#define GALILEO_INTR_RETRY_CTR (1 << 20) + #define GALILEO_ENTC0 0x01 #define GALILEO_SELTC0 0x02 @@ -86,5 +96,21 @@ do { \ GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \ (PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS) +#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) +# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ +# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ +# define COBALT_LED_WEB (1 << 2) /* RaQ */ +# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */ +# define COBALT_LED_RESET 0x0f + +#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK) +# define COBALT_KEY_CLEAR (1 << 1) +# define COBALT_KEY_LEFT (1 << 2) +# define COBALT_KEY_UP (1 << 3) +# define COBALT_KEY_DOWN (1 << 4) +# define COBALT_KEY_RIGHT (1 << 5) +# define COBALT_KEY_ENTER (1 << 6) +# define COBALT_KEY_SELECT (1 << 7) +# define COBALT_KEY_MASK 0xfe #endif /* __ASM_COBALT_H */ diff --git a/include/asm-mips/cobalt/mach-gt64120.h b/include/asm-mips/cobalt/mach-gt64120.h new file mode 100644 index 000000000000..587fc4378f44 --- /dev/null +++ b/include/asm-mips/cobalt/mach-gt64120.h @@ -0,0 +1 @@ +/* there's something here ... in the dark */ diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index 4eed8e2acdc3..780197abb8ff 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -52,16 +52,6 @@ #define JAZZ_SERIAL_PORT_DEFNS #endif -#ifdef CONFIG_MIPS_COBALT -#include -#define COBALT_BASE_BAUD (18432000 / 16) -#define COBALT_SERIAL_PORT_DEFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */ -#else -#define COBALT_SERIAL_PORT_DEFNS -#endif - /* * Both Galileo boards have the same UART mappings. */ @@ -342,7 +332,6 @@ #endif /* CONFIG_SGI_IP32 */ #define SERIAL_PORT_DFNS \ - COBALT_SERIAL_PORT_DEFNS \ DDB5477_SERIAL_PORT_DEFNS \ EV96100_SERIAL_PORT_DEFNS \ IP32_SERIAL_PORT_DEFNS \ -- cgit v1.2.3 From 6d7bf017e821f3c093c80d1ee919d8d87904701c Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Fri, 4 Mar 2005 19:40:45 +0000 Subject: It helps to not use a _mem_ function for requesting I/O space. Signed-off-by: Ralf Baechle Signed-off-by: Ralf Baechle --- drivers/video/gbefb.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index d3c1922cb13a..485604cd4462 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -1126,7 +1126,7 @@ static int __init gbefb_probe(struct device *dev) gbefb_setup(options); #endif - if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { + if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { printk(KERN_ERR "gbefb: couldn't reserve mmio region\n"); ret = -EBUSY; goto out_release_framebuffer; @@ -1152,12 +1152,24 @@ static int __init gbefb_probe(struct device *dev) if (gbe_mem_phys) { /* memory was allocated at boot time */ gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size); + if (!gbe_mem) { + printk(KERN_ERR "gbefb: couldn't map framebuffer\n"); + ret = -ENOMEM; + goto out_tiles_free; + } + gbe_dma_addr = 0; } else { /* try to allocate memory with the classical allocator * this has high chance to fail on low memory machines */ gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr, GFP_KERNEL); + if (!gbe_mem) { + printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n"); + ret = -ENOMEM; + goto out_tiles_free; + } + gbe_mem_phys = (unsigned long) gbe_dma_addr; } @@ -1165,12 +1177,6 @@ static int __init gbefb_probe(struct device *dev) mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1); #endif - if (!gbe_mem) { - printk(KERN_ERR "gbefb: couldn't map framebuffer\n"); - ret = -ENXIO; - goto out_tiles_free; - } - /* map framebuffer memory into tiles table */ for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++) gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i; -- cgit v1.2.3 From 96ed748d9da03d091799f8107fce27d218fd8f5c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 10 Mar 2005 17:34:03 +0000 Subject: qtronix.c: Handle kmalloc failure. Signed-off-by: Ralf Baechle --- drivers/char/qtronix.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/char/qtronix.c b/drivers/char/qtronix.c index 40a3cf62e1a8..601d09baf9d7 100644 --- a/drivers/char/qtronix.c +++ b/drivers/char/qtronix.c @@ -591,6 +591,11 @@ static int __init psaux_init(void) return retval; queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL); + if (!queue) { + misc_deregister(&psaux_mouse); + return -ENOMEM; + } + memset(queue, 0, sizeof(*queue)); queue->head = queue->tail = 0; init_waitqueue_head(&queue->proc_list); -- cgit v1.2.3 From 3b495f2bb749b828499135743b9ddec46e34fda8 Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Mon, 4 Apr 2005 01:06:19 +0000 Subject: Au1100 FB driver uplift for 2.6. Signed-off-by: Ralf Baechle Acked-by: Antonino Daplas --- arch/mips/au1000/common/platform.c | 34 ++ arch/mips/au1000/common/setup.c | 2 - drivers/video/Makefile | 2 +- drivers/video/au1100fb.c | 971 ++++++++++++++++++---------------- drivers/video/au1100fb.h | 614 ++++++++++----------- include/asm-mips/mach-au1x00/au1000.h | 7 + 6 files changed, 851 insertions(+), 779 deletions(-) (limited to 'drivers') diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 0776b2db5641..3ca3cb8a8a73 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -41,8 +41,42 @@ static struct platform_device au1xxx_usb_ohci_device = { .resource = au1xxx_usb_ohci_resources, }; +/*** AU1100 LCD controller ***/ + +#ifdef CONFIG_FB_AU1100 +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = LCD_PHYS_ADDR, + .end = LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = ~(u32)0; + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; +#endif + + static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_ohci_device, +#ifdef CONFIG_FB_AU1100 + &au1100_lcd_device, +#endif }; int au1xxx_platform_init(void) diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index c1e7d2dcc190..8d21efdf29b7 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -106,8 +106,6 @@ void __init plat_setup(void) /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ #ifdef CONFIG_MIPS_HYDROGEN3 strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor"); -#else - strcat(argptr, " video=au1100fb:panel:s10,nohwcursor"); #endif } #endif diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 1fff29f48ca8..97c5d03ac8d9 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -86,7 +86,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_W100) += w100fb.o -obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o +obj-$(CONFIG_FB_AU1100) += au1100fb.o obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index b6fe30c3ad62..a5129806172f 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -2,6 +2,11 @@ * BRIEF MODULE DESCRIPTION * Au1100 LCD Driver. * + * Rewritten for 2.6 by Embedded Alley Solutions + * , based on submissions by + * Karl Lessard + * + * * Copyright 2002 MontaVista Software * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com @@ -33,298 +38,253 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include #include #include #include #include #include -#include -#include -#include #include #include -#include +#include +#include +#include -#include -#include -#include "au1100fb.h" +#include -#include