From 2ac654f740b574c58ee02bac3816cf466a1bfb41 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 16 Nov 2011 20:40:42 -0800 Subject: Bluetooth: btmrvl: support Marvell Bluetooth device SD8797 The SD8797 firmware image is shared with mwifiex driver. Whoever gets loaded first will be responsible for firmware downloading. Signed-off-by: Bing Zhao Signed-off-by: Frank Huang Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/Kconfig | 6 +++--- drivers/bluetooth/btmrvl_sdio.c | 15 +++++++++++++-- 2 files changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 11b41fd40c27..5ccf142ef0b8 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -188,7 +188,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787. + Marvell Bluetooth devices, such as 8688/8787/8797. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. @@ -201,8 +201,8 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787 chipsets are - supported. + devices with SDIO interface. Currently SD8688/SD8787/SD8797 + chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index c827d737ccee..37b56398c8a6 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -64,7 +64,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = { .io_port_1 = 0x01, .io_port_2 = 0x02, }; -static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = { +static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { .cfg = 0x00, .host_int_mask = 0x02, .host_intstatus = 0x03, @@ -91,7 +91,14 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { .helper = NULL, .firmware = "mrvl/sd8787_uapsta.bin", - .reg = &btmrvl_reg_8787, + .reg = &btmrvl_reg_87xx, + .sd_blksz_fw_dl = 256, +}; + +static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { + .helper = NULL, + .firmware = "mrvl/sd8797_uapsta.bin", + .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -102,6 +109,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8787 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A), .driver_data = (unsigned long) &btmrvl_sdio_sd8787 }, + /* Marvell SD8797 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), + .driver_data = (unsigned long) &btmrvl_sdio_sd8797 }, { } /* Terminating entry */ }; @@ -1075,3 +1085,4 @@ MODULE_LICENSE("GPL v2"); MODULE_FIRMWARE("sd8688_helper.bin"); MODULE_FIRMWARE("sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); -- cgit v1.2.3 From 54a8a79c55ce283c94ce4c67a98d28c21830405a Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 22 Nov 2011 09:32:57 +0800 Subject: btusb: fix a memory leak in btusb_send_frame() This patch fixes the following memory leak reported by kmemleak: unreferenced object 0xffff880060a53840 (size 192): comm "softirq", pid 0, jiffies 4320571771 (age 1406.569s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] create_object+0x187/0x28b [] kmemleak_alloc+0x73/0x98 [] __kmalloc+0xfc/0x123 [] usb_alloc_urb+0x1e/0x48 [] btusb_send_frame+0x86/0x385 [btusb] [] hci_send_frame+0xa0/0xa5 [bluetooth] [] hci_cmd_task+0xa0/0xfb [bluetooth] [] tasklet_action+0x8f/0xef [] __do_softirq+0xf4/0x1db [] run_ksoftirqd+0x84/0x129 [] kthread+0xa0/0xa8 [] kernel_thread_helper+0x4/0x10 [] 0xffffffffffffffff The problem is that when inc_tx() returns non-zero, we forgot to call usb_free_urb(). Cc: Marcel Holtmann Cc: "Gustavo F. Padovan" Signed-off-by: WANG Cong Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index fe4ebc375b3d..eabc437ce500 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -777,9 +777,8 @@ skip_waking: usb_mark_last_busy(data->udev); } - usb_free_urb(urb); - done: + usb_free_urb(urb); return err; } -- cgit v1.2.3 From 162d12de656bc76786ba5fad6dac7bd238de9657 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 4 Dec 2011 08:38:54 +0100 Subject: ath9k: fix check for antenna diversity support fixes a regression on single-stream chips introduced in commit 43c3528430bd29f5e52438cad7cf7c0c62bf4583 "ath9k: implement .get_antenna and .set_antenna" Signed-off-by: Felix Fietkau Reported-by: Marek Lindner Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 93fbe6f40898..d2348a5a7809 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -286,7 +286,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) ath_start_ani(common); } - if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) { + if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) { struct ath_hw_antcomb_conf div_ant_conf; u8 lna_conf; -- cgit v1.2.3 From 43af940c54d712ab5e6d6798a82498b25c2af299 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 05:01:15 +0000 Subject: net/fec: fix the use of pdev->id The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 1124ce0a1594..c136230d50bb 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -232,6 +232,7 @@ struct fec_enet_private { struct platform_device *pdev; int opened; + int dev_id; /* Phylib and MDIO interface */ struct mii_bus *mii_bus; @@ -837,7 +838,7 @@ static void __inline__ fec_get_mac(struct net_device *ndev) /* Adjust MAC if using macaddr */ if (iap == macaddr) - ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id; + ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id; } /* ------------------------------------------------------------------------- */ @@ -953,7 +954,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) char mdio_bus_id[MII_BUS_ID_SIZE]; char phy_name[MII_BUS_ID_SIZE + 3]; int phy_id; - int dev_id = fep->pdev->id; + int dev_id = fep->dev_id; fep->phy_dev = NULL; @@ -1031,7 +1032,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) * mdio interface in board design, and need to be configured by * fec0 mii_bus. */ - if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) { + if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) { /* fec1 uses fec0 mii_bus */ fep->mii_bus = fec0_mii_bus; return 0; @@ -1063,7 +1064,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) fep->mii_bus->read = fec_enet_mdio_read; fep->mii_bus->write = fec_enet_mdio_write; fep->mii_bus->reset = fec_enet_mdio_reset; - snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1); + snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", fep->dev_id + 1); fep->mii_bus->priv = fep; fep->mii_bus->parent = &pdev->dev; @@ -1521,6 +1522,7 @@ fec_probe(struct platform_device *pdev) int i, irq, ret = 0; struct resource *r; const struct of_device_id *of_id; + static int dev_id; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id) @@ -1548,6 +1550,7 @@ fec_probe(struct platform_device *pdev) fep->hwp = ioremap(r->start, resource_size(r)); fep->pdev = pdev; + fep->dev_id = dev_id++; if (!fep->hwp) { ret = -ENOMEM; -- cgit v1.2.3 From a454daceb78844a09c08b6e2d8badcb76a5d73b9 Mon Sep 17 00:00:00 2001 From: Djalal Harouni Date: Tue, 6 Dec 2011 15:47:12 +0000 Subject: ppp: fix pptp double release_sock in pptp_bind() Signed-off-by: Djalal Harouni Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ppp/pptp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 89f829f5f725..f8a6853b692e 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -423,10 +423,8 @@ static int pptp_bind(struct socket *sock, struct sockaddr *uservaddr, lock_sock(sk); opt->src_addr = sp->sa_addr.pptp; - if (add_chan(po)) { - release_sock(sk); + if (add_chan(po)) error = -EBUSY; - } release_sock(sk); return error; -- cgit v1.2.3 From 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 11 Nov 2011 05:10:39 +0000 Subject: fsl_pq_mdio: Clean up tbi address configuration The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 53 +++++----------------------- 1 file changed, 8 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 52f4e8ad48e7..4d9f84b8ab97 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -183,28 +183,10 @@ void fsl_pq_mdio_bus_name(char *name, struct device_node *np) } EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name); -/* Scan the bus in reverse, looking for an empty spot */ -static int fsl_pq_mdio_find_free(struct mii_bus *new_bus) -{ - int i; - - for (i = PHY_MAX_ADDR; i > 0; i--) { - u32 phy_id; - - if (get_phy_id(new_bus, i, &phy_id)) - return -1; - - if (phy_id == 0xffffffff) - break; - } - - return i; -} - -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np) { +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) struct gfar __iomem *enet_regs; /* @@ -220,15 +202,15 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct devi } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi")) { return of_iomap(np, 1); - } else - return NULL; -} + } #endif + return NULL; +} -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) { +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) struct device_node *np = NULL; int err = 0; @@ -261,9 +243,10 @@ static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) return err; else return -EINVAL; -} +#else + return -ENODEV; #endif - +} static int fsl_pq_mdio_probe(struct platform_device *ofdev) { @@ -339,19 +322,13 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi") || of_device_is_compatible(np, "gianfar")) { -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) tbipa = get_gfar_tbipa(regs, np); if (!tbipa) { err = -EINVAL; goto err_free_irqs; } -#else - err = -ENODEV; - goto err_free_irqs; -#endif } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || of_device_is_compatible(np, "ucc_geth_phy")) { -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) u32 id; static u32 mii_mng_master; @@ -364,10 +341,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) mii_mng_master = id; ucc_set_qe_mux_mii_mng(id - 1); } -#else - err = -ENODEV; - goto err_free_irqs; -#endif } else { err = -ENODEV; goto err_free_irqs; @@ -386,16 +359,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) } if (tbiaddr == -1) { - out_be32(tbipa, 0); - - tbiaddr = fsl_pq_mdio_find_free(new_bus); - } - - /* - * We define TBIPA at 0 to be illegal, opting to fail for boards that - * have PHYs at 1-31, rather than change tbipa and rescan. - */ - if (tbiaddr == 0) { err = -EBUSY; goto err_free_irqs; -- cgit v1.2.3 From 91ddff8a3b9cc7ac2252aca138220939cf6cc2cf Mon Sep 17 00:00:00 2001 From: Philipp Dreimann Date: Wed, 7 Dec 2011 13:43:31 -0600 Subject: rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition In drivers rtl8192ce, rtl8192cu, rtl8192se, and rtl8192de, break statements would allow ppsc->rfpwr_state to be changed to ERFSLEEP even though the device is actually in ERFOFF. Signed-off-by: Philipp Dreimann Signed-off-by: Larry Finger Cc: Stable Cc: Chaoming Li Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192ce/phy.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192cu/phy.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c index 592a10ac5929..3b585aadabfc 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c @@ -569,7 +569,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw, } case ERFSLEEP:{ if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { ring = &pcipriv->dev.tx_ring[queue_id]; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c index 72852900df84..e49cf2244c75 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c @@ -548,7 +548,7 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, break; case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { ring = &pcipriv->dev.tx_ring[queue_id]; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 3ac7af1c5509..0883349e1c83 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -3374,7 +3374,7 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw, break; case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c index f27171af979c..f10ac1ad9087 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c @@ -602,7 +602,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, } case ERFSLEEP: if (ppsc->rfpwr_state == ERFOFF) - break; + return false; for (queue_id = 0, i = 0; queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) { -- cgit v1.2.3 From 329456d1ffb416c220813725b7363cda9975c9aa Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 5 Dec 2011 23:19:51 +0100 Subject: ssb: fix init regression with SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a Data bus error on some SoCs. The first fix for this problem did not solve it on all devices. commit 6ae8ec27868bfdbb815287bee8146acbefaee867 Author: Rafał Miłecki Date: Tue Jul 5 17:25:32 2011 +0200 ssb: fix init regression of hostmode PCI core In ssb_pcicore_fix_sprom_core_index() the sprom on the PCI core is accessed, but the sprom only exists when the ssb bus is connected over a PCI bus to the rest of the system and not when the SSB Bus is the main system bus. SoCs sometimes have a PCI host controller and there this code will not be executed, but there are some old SoCs with an PCI controller in client mode around and ssb_pcicore_fix_sprom_core_index() should not be called on these devices too. The PCI controller on these devices are unused, but without this fix it results in an Data bus error when it gets initialized. Cc: Michael Buesch Cc: Rafał Miłecki Signed-off-by: Hauke Mehrtens Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index e6ac3177fbbe..32c535f5ce31 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -516,10 +516,14 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { - ssb_pcicore_fix_sprom_core_index(pc); + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus = pdev->bus; + + if (bus->bustype == SSB_BUSTYPE_PCI) + ssb_pcicore_fix_sprom_core_index(pc); /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); + ssb_write32(pdev, SSB_INTVEC, 0); /* Additional PCIe always once-executed workarounds */ if (pc->dev->id.coreid == SSB_DEV_PCIE) { -- cgit v1.2.3