From 885e7b0e181c14e4d0ddd26c688bad2b84c1ada9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 14 Oct 2014 14:16:24 -0700 Subject: target: Don't call TFO->write_pending if data_length == 0 If an initiator sends a zero-length command (e.g. TEST UNIT READY) but sets the transfer direction in the transport layer to indicate a data-out phase, we still shouldn't try to transfer data. At best it's a NOP, and depending on the transport, we might crash on an uninitialized sg list. Reported-by: Craig Watson Signed-off-by: Roland Dreier Cc: # 3.1 Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9ea0d5f03f7a..be877bf6f730 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2292,7 +2292,7 @@ transport_generic_new_cmd(struct se_cmd *cmd) * and let it call back once the write buffers are ready. */ target_add_to_state_list(cmd); - if (cmd->data_direction != DMA_TO_DEVICE) { + if (cmd->data_direction != DMA_TO_DEVICE || cmd->data_length == 0) { target_execute_cmd(cmd); return 0; } -- cgit v1.2.3 From ab8edab132829b26dd13db6caca3c242cce35dc1 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 8 Oct 2014 06:19:20 +0000 Subject: vhost-scsi: Take configfs group dependency during VHOST_SCSI_SET_ENDPOINT This patch addresses a bug where individual vhost-scsi configfs endpoint groups can be removed from below while active exports to QEMU userspace still exist, resulting in an OOPs. It adds a configfs_depend_item() in vhost_scsi_set_endpoint() to obtain an explicit dependency on se_tpg->tpg_group in order to prevent individual vhost-scsi WWPN endpoints from being released via normal configfs methods while an QEMU ioctl reference still exists. Also, add matching configfs_undepend_item() in vhost_scsi_clear_endpoint() to release the dependency, once QEMU's reference to the individual group at /sys/kernel/config/target/vhost/$WWPN/$TPGT is released. (Fix up vhost_scsi_clear_endpoint() error path - DanC) Cc: Michael S. Tsirkin Cc: Paolo Bonzini Cc: Stefan Hajnoczi Cc: # 3.6+ Signed-off-by: Nicholas Bellinger --- drivers/vhost/scsi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 69906cacd04f..a17f11850669 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -1312,6 +1312,7 @@ static int vhost_scsi_set_endpoint(struct vhost_scsi *vs, struct vhost_scsi_target *t) { + struct se_portal_group *se_tpg; struct tcm_vhost_tport *tv_tport; struct tcm_vhost_tpg *tpg; struct tcm_vhost_tpg **vs_tpg; @@ -1359,6 +1360,21 @@ vhost_scsi_set_endpoint(struct vhost_scsi *vs, ret = -EEXIST; goto out; } + /* + * In order to ensure individual vhost-scsi configfs + * groups cannot be removed while in use by vhost ioctl, + * go ahead and take an explicit se_tpg->tpg_group.cg_item + * dependency now. + */ + se_tpg = &tpg->se_tpg; + ret = configfs_depend_item(se_tpg->se_tpg_tfo->tf_subsys, + &se_tpg->tpg_group.cg_item); + if (ret) { + pr_warn("configfs_depend_item() failed: %d\n", ret); + kfree(vs_tpg); + mutex_unlock(&tpg->tv_tpg_mutex); + goto out; + } tpg->tv_tpg_vhost_count++; tpg->vhost_scsi = vs; vs_tpg[tpg->tport_tpgt] = tpg; @@ -1401,6 +1417,7 @@ static int vhost_scsi_clear_endpoint(struct vhost_scsi *vs, struct vhost_scsi_target *t) { + struct se_portal_group *se_tpg; struct tcm_vhost_tport *tv_tport; struct tcm_vhost_tpg *tpg; struct vhost_virtqueue *vq; @@ -1449,6 +1466,13 @@ vhost_scsi_clear_endpoint(struct vhost_scsi *vs, vs->vs_tpg[target] = NULL; match = true; mutex_unlock(&tpg->tv_tpg_mutex); + /* + * Release se_tpg->tpg_group.cg_item configfs dependency now + * to allow vhost-scsi WWPN se_tpg->tpg_group shutdown to occur. + */ + se_tpg = &tpg->se_tpg; + configfs_undepend_item(se_tpg->se_tpg_tfo->tf_subsys, + &se_tpg->tpg_group.cg_item); } if (match) { for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) { -- cgit v1.2.3 From f2774f430ea65fddc068865d364bb254d2816648 Mon Sep 17 00:00:00 2001 From: Steven Allen Date: Wed, 15 Oct 2014 10:59:21 -0700 Subject: iscsi-target: return the correct port in SendTargets The fact that a target is published on the any address has no bearing on which port(s) it is published. SendTargets should always send the portal's port, not the port used for discovery. Signed-off-by: Steven Allen Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index b19e4329ba00..73e58d22e325 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3491,7 +3491,7 @@ iscsit_build_sendtargets_response(struct iscsi_cmd *cmd, len = sprintf(buf, "TargetAddress=" "%s:%hu,%hu", inaddr_any ? conn->local_ip : np->np_ip, - inaddr_any ? conn->local_port : np->np_port, + np->np_port, tpg->tpgt); len += 1; -- cgit v1.2.3 From ab477c1ff5e0a744c072404bf7db51bfe1f05b6e Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sun, 19 Oct 2014 18:05:33 +0300 Subject: srp-target: Retry when QP creation fails with ENOMEM It is not guaranteed to that srp_sq_size is supported by the HCA. So if we failed to create the QP with ENOMEM, try with a smaller srp_sq_size. Keep it up until we hit MIN_SRPT_SQ_SIZE, then fail the connection. Reported-by: Mark Lehrer Signed-off-by: Bart Van Assche Signed-off-by: Sagi Grimberg Cc: # 3.4+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 7206547c13ce..dc829682701a 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2092,6 +2092,7 @@ static int srpt_create_ch_ib(struct srpt_rdma_ch *ch) if (!qp_init) goto out; +retry: ch->cq = ib_create_cq(sdev->device, srpt_completion, NULL, ch, ch->rq_size + srp_sq_size, 0); if (IS_ERR(ch->cq)) { @@ -2115,6 +2116,13 @@ static int srpt_create_ch_ib(struct srpt_rdma_ch *ch) ch->qp = ib_create_qp(sdev->pd, qp_init); if (IS_ERR(ch->qp)) { ret = PTR_ERR(ch->qp); + if (ret == -ENOMEM) { + srp_sq_size /= 2; + if (srp_sq_size >= MIN_SRPT_SQ_SIZE) { + ib_destroy_cq(ch->cq); + goto retry; + } + } printk(KERN_ERR "failed to create_qp ret= %d\n", ret); goto err_destroy_cq; } -- cgit v1.2.3 From f57915cfa5b2b14c1cffa2e83c034f55e3f0e70d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 22 Oct 2014 14:55:49 -0700 Subject: ib_isert: Add max_send_sge=2 minimum for control PDU responses This patch adds a max_send_sge=2 minimum in isert_conn_setup_qp() to ensure outgoing control PDU responses with tx_desc->num_sge=2 are able to function correctly. This addresses a bug with RDMA hardware using dev_attr.max_sge=3, that in the original code with the ConnectX-2 work-around would result in isert_conn->max_sge=1 being negotiated. Originally reported by Chris with ocrdma driver. Reported-by: Chris Moore Tested-by: Chris Moore Signed-off-by: Or Gerlitz Cc: # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 3effa931fce2..ef5b22b3ea83 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -115,9 +115,12 @@ isert_conn_setup_qp(struct isert_conn *isert_conn, struct rdma_cm_id *cma_id, attr.cap.max_recv_wr = ISERT_QP_MAX_RECV_DTOS; /* * FIXME: Use devattr.max_sge - 2 for max_send_sge as - * work-around for RDMA_READ.. + * work-around for RDMA_READs with ConnectX-2. + * + * Also, still make sure to have at least two SGEs for + * outgoing control PDU responses. */ - attr.cap.max_send_sge = device->dev_attr.max_sge - 2; + attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2); isert_conn->max_sge = attr.cap.max_send_sge; attr.cap.max_recv_sge = 1; -- cgit v1.2.3 From 3b726ae2de02a406cc91903f80132daee37b6f1b Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 28 Oct 2014 13:45:03 -0700 Subject: iser-target: Handle DEVICE_REMOVAL event on network portal listener correctly In this case the cm_id->context is the isert_np, and the cm_id->qp is NULL, so use that to distinct the cases. Since we don't expect any other events on this cm_id we can just return -1 for explicit termination of the cm_id by the cma layer. Signed-off-by: Sagi Grimberg Cc: # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index ef5b22b3ea83..a6c7b395c61d 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -806,14 +806,25 @@ wake_up: complete(&isert_conn->conn_wait); } -static void +static int isert_disconnected_handler(struct rdma_cm_id *cma_id, bool disconnect) { - struct isert_conn *isert_conn = (struct isert_conn *)cma_id->context; + struct isert_conn *isert_conn; + + if (!cma_id->qp) { + struct isert_np *isert_np = cma_id->context; + + isert_np->np_cm_id = NULL; + return -1; + } + + isert_conn = (struct isert_conn *)cma_id->context; isert_conn->disconnect = disconnect; INIT_WORK(&isert_conn->conn_logout_work, isert_disconnect_work); schedule_work(&isert_conn->conn_logout_work); + + return 0; } static int @@ -828,6 +839,9 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) switch (event->event) { case RDMA_CM_EVENT_CONNECT_REQUEST: ret = isert_connect_request(cma_id, event); + if (ret) + pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n", + event->event, ret); break; case RDMA_CM_EVENT_ESTABLISHED: isert_connected_handler(cma_id); @@ -837,7 +851,7 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) case RDMA_CM_EVENT_DEVICE_REMOVAL: /* FALLTHRU */ disconnect = true; case RDMA_CM_EVENT_TIMEWAIT_EXIT: /* FALLTHRU */ - isert_disconnected_handler(cma_id, disconnect); + ret = isert_disconnected_handler(cma_id, disconnect); break; case RDMA_CM_EVENT_CONNECT_ERROR: default: @@ -845,12 +859,6 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) break; } - if (ret != 0) { - pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n", - event->event, ret); - dump_stack(); - } - return ret; } @@ -3193,7 +3201,8 @@ isert_free_np(struct iscsi_np *np) { struct isert_np *isert_np = (struct isert_np *)np->np_context; - rdma_destroy_id(isert_np->np_cm_id); + if (isert_np->np_cm_id) + rdma_destroy_id(isert_np->np_cm_id); np->np_context = NULL; kfree(isert_np); -- cgit v1.2.3 From b6932ee35f1c1364dcea0e691b2feb912a6777e5 Mon Sep 17 00:00:00 2001 From: Steven Allen Date: Fri, 24 Oct 2014 15:18:26 -0700 Subject: target: return CONFLICT only when SA key unmatched PREEMPT (and PREEMPT AND ABORT) should return CONFLICT iff a specified SERVICE ACTION RESERVATION KEY is specified and matches no existing persistent reservation. Without this patch, a PREEMPT will return CONFLICT if either all reservations are held by the initiator (self preemption) or there is nothing to preempt. According to the spec, both of these cases should succeed. Signed-off-by: Steven Allen Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 8c60a1a1ae8d..9f93b8234095 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -2738,7 +2738,8 @@ core_scsi3_pro_preempt(struct se_cmd *cmd, int type, int scope, u64 res_key, struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; struct t10_reservation *pr_tmpl = &dev->t10_pr; u32 pr_res_mapped_lun = 0; - int all_reg = 0, calling_it_nexus = 0, released_regs = 0; + int all_reg = 0, calling_it_nexus = 0; + bool sa_res_key_unmatched = sa_res_key != 0; int prh_type = 0, prh_scope = 0; if (!se_sess) @@ -2813,6 +2814,7 @@ core_scsi3_pro_preempt(struct se_cmd *cmd, int type, int scope, u64 res_key, if (!all_reg) { if (pr_reg->pr_res_key != sa_res_key) continue; + sa_res_key_unmatched = false; calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; pr_reg_nacl = pr_reg->pr_reg_nacl; @@ -2820,7 +2822,6 @@ core_scsi3_pro_preempt(struct se_cmd *cmd, int type, int scope, u64 res_key, __core_scsi3_free_registration(dev, pr_reg, (preempt_type == PREEMPT_AND_ABORT) ? &preempt_and_abort_list : NULL, calling_it_nexus); - released_regs++; } else { /* * Case for any existing all registrants type @@ -2838,6 +2839,7 @@ core_scsi3_pro_preempt(struct se_cmd *cmd, int type, int scope, u64 res_key, if ((sa_res_key) && (pr_reg->pr_res_key != sa_res_key)) continue; + sa_res_key_unmatched = false; calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; if (calling_it_nexus) @@ -2848,7 +2850,6 @@ core_scsi3_pro_preempt(struct se_cmd *cmd, int type, int scope, u64 res_key, __core_scsi3_free_registration(dev, pr_reg, (preempt_type == PREEMPT_AND_ABORT) ? &preempt_and_abort_list : NULL, 0); - released_regs++; } if (!calling_it_nexus) core_scsi3_ua_allocate(pr_reg_nacl, @@ -2863,7 +2864,7 @@ core_scsi3_pro_preempt(struct se_cmd *cmd, int type, int scope, u64 res_key, * registered reservation key, then the device server shall * complete the command with RESERVATION CONFLICT status. */ - if (!released_regs) { + if (sa_res_key_unmatched) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); return TCM_RESERVATION_CONFLICT; -- cgit v1.2.3 From 0a8727e69778683495058852f783eeda141a754e Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Thu, 6 Nov 2014 13:54:27 -0600 Subject: spi: dw: Fix dynamic speed change. An IOCTL call that calls spi_setup() and then dw_spi_setup() will overwrite the persisted last transfer speed. On each transfer, the SPI speed is compared to the last transfer speed to determine if the clock divider registers need to be updated (did the speed change?). This bug was observed with the spidev driver using spi-config to update the max transfer speed. This fix: Don't overwrite the persisted last transaction clock speed when updating the SPI parameters in dw_spi_setup(). On the next transaction, the new speed won't match the persisted last speed and the hardware registers will be updated. On initialization, the persisted last transaction clock speed will be 0 but will be updated after the first SPI transaction. Move zeroed clock divider check into clock change test because chip->clk_div is zero on startup and would cause a divide-by-zero error. The calculation was wrong as well (can't support odd #). Reported-by: Vlastimil Setka Signed-off-by: Vlastimil Setka Signed-off-by: Thor Thayer Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-dw.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 729215885250..332a6abd8cf3 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -376,9 +376,6 @@ static void pump_transfers(unsigned long data) chip = dws->cur_chip; spi = message->spi; - if (unlikely(!chip->clk_div)) - chip->clk_div = dws->max_freq / chip->speed_hz; - if (message->state == ERROR_STATE) { message->status = -EIO; goto early_exit; @@ -419,7 +416,7 @@ static void pump_transfers(unsigned long data) if (transfer->speed_hz) { speed = chip->speed_hz; - if (transfer->speed_hz != speed) { + if ((transfer->speed_hz != speed) || (!chip->clk_div)) { speed = transfer->speed_hz; /* clk_div doesn't support odd number */ @@ -581,7 +578,6 @@ static int dw_spi_setup(struct spi_device *spi) dev_err(&spi->dev, "No max speed HZ parameter\n"); return -EINVAL; } - chip->speed_hz = spi->max_speed_hz; chip->tmode = 0; /* Tx & Rx */ /* Default SPI mode is SCPOL = 0, SCPH = 0 */ -- cgit v1.2.3 From ffcfe30ebd8dd703d0fc4324ffe56ea21f5479f4 Mon Sep 17 00:00:00 2001 From: Preston Fick Date: Fri, 7 Nov 2014 23:26:11 -0600 Subject: USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick Signed-off-by: Preston Fick Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index cfd009dc4018..6c4eb3cf5efd 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -120,6 +120,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ -- cgit v1.2.3 From fb6eaf2ccca7d3580931bcb4b735101b461f38cf Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 5 Nov 2014 19:10:52 -0600 Subject: rtlwifi: Fix setting of tx descriptor for new trx flow Device RTL8192EE uses a new form of trx flow. This fix sets up the descriptors correctly. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 25daa8715219..116f746e7c73 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1127,9 +1127,14 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw) __skb_queue_tail(&ring->queue, pskb); - rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true, HW_DESC_OWN, - &temp_one); - + if (rtlpriv->use_new_trx_flow) { + temp_one = 4; + rtlpriv->cfg->ops->set_desc(hw, (u8 *)pbuffer_desc, true, + HW_DESC_OWN, (u8 *)&temp_one); + } else { + rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true, HW_DESC_OWN, + &temp_one); + } return; } -- cgit v1.2.3 From caea2172c23465a77556b2e1d06412b532b90235 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 5 Nov 2014 19:10:53 -0600 Subject: rtlwifi: Fix errors in descriptor manipulation There are typos in the handling of the descriptor pointers where the wrong descriptor is referenced. There is also an error in which the pointer is incremented twice. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 116f746e7c73..6d2b6281e22b 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1375,9 +1375,9 @@ static void _rtl_pci_free_tx_ring(struct ieee80211_hw *hw, ring->desc = NULL; if (rtlpriv->use_new_trx_flow) { pci_free_consistent(rtlpci->pdev, - sizeof(*ring->desc) * ring->entries, + sizeof(*ring->buffer_desc) * ring->entries, ring->buffer_desc, ring->buffer_desc_dma); - ring->desc = NULL; + ring->buffer_desc = NULL; } } @@ -1548,7 +1548,6 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw) true, HW_DESC_TXBUFF_ADDR), skb->len, PCI_DMA_TODEVICE); - ring->idx = (ring->idx + 1) % ring->entries; kfree_skb(skb); ring->idx = (ring->idx + 1) % ring->entries; } -- cgit v1.2.3 From d1cd5ba4ca8b41793f4e581dd1dbf46b7f2cf691 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 7 Nov 2014 10:05:12 -0600 Subject: rtlwifi: rtl8192se: Fix connection problems Changes in the vendor driver were added to rtlwifi, but some updates to rtl8192se were missed, and the driver could neither scan nor connect. There are other changes that will enhance performance, but this minimal set fix the basic functionality. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 3 ++- drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 7 +++++-- drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 2 ++ drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 16 ++++++++++++++++ 4 files changed, 25 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 6d2b6281e22b..61f5d36eca6a 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -842,7 +842,8 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) break; } /* handle command packet here */ - if (rtlpriv->cfg->ops->rx_command_packet(hw, stats, skb)) { + if (rtlpriv->cfg->ops->rx_command_packet && + rtlpriv->cfg->ops->rx_command_packet(hw, stats, skb)) { dev_kfree_skb_any(skb); goto end; } diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 00e067044c08..5761d5b49e39 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -1201,6 +1201,9 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw, } + if (type != NL80211_IFTYPE_AP && + rtlpriv->mac80211.link_state < MAC80211_LINKED) + bt_msr = rtl_read_byte(rtlpriv, MSR) & ~MSR_LINK_MASK; rtl_write_byte(rtlpriv, (MSR), bt_msr); temp = rtl_read_dword(rtlpriv, TCR); @@ -1262,6 +1265,7 @@ void rtl92se_enable_interrupt(struct ieee80211_hw *hw) rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]); /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */ rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F); + rtlpci->irq_enabled = true; } void rtl92se_disable_interrupt(struct ieee80211_hw *hw) @@ -1276,8 +1280,7 @@ void rtl92se_disable_interrupt(struct ieee80211_hw *hw) rtlpci = rtl_pcidev(rtl_pcipriv(hw)); rtl_write_dword(rtlpriv, INTA_MASK, 0); rtl_write_dword(rtlpriv, INTA_MASK + 4, 0); - - synchronize_irq(rtlpci->pdev->irq); + rtlpci->irq_enabled = false; } static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data) diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c index 77c5b5f35244..4b4612fe2fdb 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c @@ -399,6 +399,8 @@ static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, case 2: currentcmd = &postcommoncmd[*step]; break; + default: + return true; } if (currentcmd->cmdid == CMDID_END) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c index aadba29c167a..fb003868bdef 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c @@ -236,6 +236,19 @@ static void rtl92s_deinit_sw_vars(struct ieee80211_hw *hw) } } +static bool rtl92se_is_tx_desc_closed(struct ieee80211_hw *hw, u8 hw_queue, + u16 index) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue]; + u8 *entry = (u8 *)(&ring->desc[ring->idx]); + u8 own = (u8)rtl92se_get_desc(entry, true, HW_DESC_OWN); + + if (own) + return false; + return true; +} + static struct rtl_hal_ops rtl8192se_hal_ops = { .init_sw_vars = rtl92s_init_sw_vars, .deinit_sw_vars = rtl92s_deinit_sw_vars, @@ -269,6 +282,7 @@ static struct rtl_hal_ops rtl8192se_hal_ops = { .led_control = rtl92se_led_control, .set_desc = rtl92se_set_desc, .get_desc = rtl92se_get_desc, + .is_tx_desc_closed = rtl92se_is_tx_desc_closed, .tx_polling = rtl92se_tx_polling, .enable_hw_sec = rtl92se_enable_hw_security_config, .set_key = rtl92se_set_key, @@ -306,6 +320,8 @@ static struct rtl_hal_cfg rtl92se_hal_cfg = { .maps[MAC_RCR_ACRC32] = RCR_ACRC32, .maps[MAC_RCR_ACF] = RCR_ACF, .maps[MAC_RCR_AAP] = RCR_AAP, + .maps[MAC_HIMR] = INTA_MASK, + .maps[MAC_HIMRE] = INTA_MASK + 4, .maps[EFUSE_TEST] = REG_EFUSE_TEST, .maps[EFUSE_CTRL] = REG_EFUSE_CTRL, -- cgit v1.2.3 From 9c3a6670863033df421c8e46f79f383cf3a922ee Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 8 Nov 2014 13:59:42 +0100 Subject: b43: fix NULL pointer dereference in b43_phy_copy() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit phy_read and phy_write are not set for every phy any more sine this: commit d342b95dd735014a590f9051b1ba227eb54ca8f6 Author: Rafał Miłecki Date: Thu Jul 31 21:59:43 2014 +0200 b43: don't duplicate common PHY read/write ops b43_phy_copy() accesses phy_read and phy_write directly and will fail with some phys. This patch fixes the regression by using the b43_phy_read() and b43_phy_write() functions which should be used for read and write access. This should fix this bug report: https://bugzilla.kernel.org/show_bug.cgi?id=87731 Reported-by: Volker Kempter Tested-by: Volker Kempter Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_common.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index 1dfc682a8055..ee27b06074e1 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -300,9 +300,7 @@ void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg) { - assert_mac_suspended(dev); - dev->phy.ops->phy_write(dev, destreg, - dev->phy.ops->phy_read(dev, srcreg)); + b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg)); } void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) -- cgit v1.2.3 From 520fe7633692181bb6d1560d655fbdfbb7c05aaa Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 10 Nov 2014 14:39:44 -0600 Subject: usb: dwc3: ep0: fix for dead code commit 6856d30 (usb: dwc3: ep0: return early on NULL requests) tried to fix a minor corner case where we could dereference a NULL pointer but it also ended up introducing some dead code. Unfortunately, that dead code, if reached, could end up starving the endpoint request list because a request would never be given back when it should. Fix this by moving the check for empty request list before its first use. Reported-by: Dave Jones Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 711b23019d54..df38e7ef4976 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -791,6 +791,10 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, trb = dwc->ep0_trb; + r = next_request(&ep0->request_list); + if (!r) + return; + status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) { dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); @@ -801,10 +805,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, return; } - r = next_request(&ep0->request_list); - if (!r) - return; - ur = &r->request; length = trb->size & DWC3_TRB_SIZE_MASK; -- cgit v1.2.3 From 9b520d84957d63348e87c0f2cbd21d86e1e8f2f2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 4 Nov 2014 15:54:11 +0200 Subject: iwlwifi: mvm: abort scan upon RFKILL This code existed but not for all the different FW APIs we support. Fix this. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/scan.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index b280d5d87127..7554f7053830 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -602,16 +602,6 @@ static int iwl_mvm_cancel_regular_scan(struct iwl_mvm *mvm) SCAN_COMPLETE_NOTIFICATION }; int ret; - if (mvm->scan_status == IWL_MVM_SCAN_NONE) - return 0; - - if (iwl_mvm_is_radio_killed(mvm)) { - ieee80211_scan_completed(mvm->hw, true); - iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); - mvm->scan_status = IWL_MVM_SCAN_NONE; - return 0; - } - iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, scan_abort_notif, ARRAY_SIZE(scan_abort_notif), @@ -1400,6 +1390,16 @@ int iwl_mvm_unified_sched_scan_lmac(struct iwl_mvm *mvm, int iwl_mvm_cancel_scan(struct iwl_mvm *mvm) { + if (mvm->scan_status == IWL_MVM_SCAN_NONE) + return 0; + + if (iwl_mvm_is_radio_killed(mvm)) { + ieee80211_scan_completed(mvm->hw, true); + iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); + mvm->scan_status = IWL_MVM_SCAN_NONE; + return 0; + } + if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) return iwl_mvm_scan_offload_stop(mvm, true); return iwl_mvm_cancel_regular_scan(mvm); -- cgit v1.2.3 From 87dd634ae72bb8f6d0dd12f1cbbc67c7da6dba3b Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Mon, 10 Nov 2014 19:25:22 +0200 Subject: iwlwifi: pcie: fix prph dump length The length counting previously done had an error in it, causing the length down the data dumping function to be shorter than it should be, causing the end of the data to get truncated off and lost. Cc: [3.17+] Fixes: 67c65f2cf710 ("iwlwifi: dump periphery registers to fw-error-dump") Signed-off-by: Liad Kaufman Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 160c3ebc48d0..dd2f3f8baa9d 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1894,8 +1894,7 @@ static u32 iwl_trans_pcie_dump_prph(struct iwl_trans *trans, int reg; __le32 *val; - prph_len += sizeof(*data) + sizeof(*prph) + - num_bytes_in_chunk; + prph_len += sizeof(**data) + sizeof(*prph) + num_bytes_in_chunk; (*data)->type = cpu_to_le32(IWL_FW_ERROR_DUMP_PRPH); (*data)->len = cpu_to_le32(sizeof(*prph) + -- cgit v1.2.3 From cfd9167af14eb4ec21517a32911d460083ee3d59 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 11 Nov 2014 14:28:47 +0100 Subject: rt2x00: do not align payload on modern H/W RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by: Antti S. Lankila Debugged-by: Antti S. Lankila Reported-by: Henrik Asp Originally-From: Helmut Schaa Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 50 ++++++++----------------------- 1 file changed, 12 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 8e68f87ab13c..66ff36447b94 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -158,55 +158,29 @@ void rt2x00queue_align_frame(struct sk_buff *skb) skb_trim(skb, frame_length); } -void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length) +/* + * H/W needs L2 padding between the header and the paylod if header size + * is not 4 bytes aligned. + */ +void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len) { - unsigned int payload_length = skb->len - header_length; - unsigned int header_align = ALIGN_SIZE(skb, 0); - unsigned int payload_align = ALIGN_SIZE(skb, header_length); - unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0; + unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0; - /* - * Adjust the header alignment if the payload needs to be moved more - * than the header. - */ - if (payload_align > header_align) - header_align += 4; - - /* There is nothing to do if no alignment is needed */ - if (!header_align) + if (!l2pad) return; - /* Reserve the amount of space needed in front of the frame */ - skb_push(skb, header_align); - - /* - * Move the header. - */ - memmove(skb->data, skb->data + header_align, header_length); - - /* Move the payload, if present and if required */ - if (payload_length && payload_align) - memmove(skb->data + header_length + l2pad, - skb->data + header_length + l2pad + payload_align, - payload_length); - - /* Trim the skb to the correct size */ - skb_trim(skb, header_length + l2pad + payload_length); + skb_push(skb, l2pad); + memmove(skb->data, skb->data + l2pad, hdr_len); } -void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length) +void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len) { - /* - * L2 padding is only present if the skb contains more than just the - * IEEE 802.11 header. - */ - unsigned int l2pad = (skb->len > header_length) ? - L2PAD_SIZE(header_length) : 0; + unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0; if (!l2pad) return; - memmove(skb->data + l2pad, skb->data, header_length); + memmove(skb->data + l2pad, skb->data, hdr_len); skb_pull(skb, l2pad); } -- cgit v1.2.3 From 0cd75b19899fd86b51a6480fb8c00dcd85a54591 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 11 Nov 2014 13:58:44 +0100 Subject: brcmfmac: fix conversion of channel width 20MHZ_NOHT The function chandef_to_chanspec() failed when converting a chandef with bandwidth set to NL80211_CHAN_WIDTH_20_NOHT. This was reported by user running the device in AP mode. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 304 at drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:381 chandef_to_chanspec.isra.11+0x158/0x184() Modules linked in: CPU: 0 PID: 304 Comm: hostapd Not tainted 3.16.0-rc7-abb+g64aa90f #8 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x6c/0x8c) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (chandef_to_chanspec.isra.11+0x158/0x184) [] (chandef_to_chanspec.isra.11) from [] (brcmf_cfg80211_start_ap+0x1e4/0x614) [] (brcmf_cfg80211_start_ap) from [] (nl80211_start_ap+0x288/0x414) [] (nl80211_start_ap) from [] (genl_rcv_msg+0x21c/0x38c) [] (genl_rcv_msg) from [] (netlink_rcv_skb+0xac/0xc0) [] (netlink_rcv_skb) from [] (genl_rcv+0x20/0x34) [] (genl_rcv) from [] (netlink_unicast+0x150/0x20c) [] (netlink_unicast) from [] (netlink_sendmsg+0x2b8/0x398) [] (netlink_sendmsg) from [] (sock_sendmsg+0x84/0xa8) [] (sock_sendmsg) from [] (___sys_sendmsg.part.29+0x268/0x278) [] (___sys_sendmsg.part.29) from [] (__sys_sendmsg+0x4c/0x7c) [] (__sys_sendmsg) from [] (ret_fast_syscall+0x0/0x44) ---[ end trace 965ee2158c9905a2 ]--- Cc: stable@vger.kernel.org # v3.17 Reported-by: Pontus Fuchs Reviewed-by: Hante Meuleman Reviewed-by: Daniel (Deognyoun) Kim Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 28fa25b509db..39b45c038a93 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -299,6 +299,7 @@ static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf, primary_offset = ch->center_freq1 - ch->chan->center_freq; switch (ch->width) { case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: ch_inf.bw = BRCMU_CHAN_BW_20; WARN_ON(primary_offset != 0); break; @@ -323,6 +324,10 @@ static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf, ch_inf.sb = BRCMU_CHAN_SB_LU; } break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: default: WARN_ON_ONCE(1); } @@ -333,6 +338,7 @@ static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf, case IEEE80211_BAND_5GHZ: ch_inf.band = BRCMU_CHAN_BAND_5G; break; + case IEEE80211_BAND_60GHZ: default: WARN_ON_ONCE(1); } -- cgit v1.2.3 From 4e6ce4dc7ce71d0886908d55129d5d6482a27ff9 Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Thu, 6 Nov 2014 10:52:23 +0530 Subject: ath9k: Fix RTC_DERIVED_CLK usage Based on the reference clock, which could be 25MHz or 40MHz, AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550. But, when a chip reset is done, processing the initvals sets the register back to the default value. Fix this by moving the code in ath9k_hw_init_pll() to ar9003_hw_override_ini(). Also, do this override for AR9531. Cc: stable@vger.kernel.org Signed-off-by: Miaoqing Pan Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 13 +++++++++++++ drivers/net/wireless/ath/ath9k/hw.c | 13 ------------- 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 697c4ae90af0..1e8ea5e4d4ca 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -664,6 +664,19 @@ static void ar9003_hw_override_ini(struct ath_hw *ah) ah->enabled_cals |= TX_CL_CAL; else ah->enabled_cals &= ~TX_CL_CAL; + + if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) { + if (ah->is_clk_25mhz) { + REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1); + REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7); + REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae); + } else { + REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1); + REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400); + REG_WRITE(ah, AR_SLP32_INC, 0x0001e800); + } + udelay(100); + } } static void ar9003_hw_prog_ini(struct ath_hw *ah, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8be4b1453394..2ad605760e21 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -861,19 +861,6 @@ static void ath9k_hw_init_pll(struct ath_hw *ah, udelay(RTC_PLL_SETTLE_DELAY); REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK); - - if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) { - if (ah->is_clk_25mhz) { - REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1); - REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7); - REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae); - } else { - REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1); - REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400); - REG_WRITE(ah, AR_SLP32_INC, 0x0001e800); - } - udelay(100); - } } static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah, -- cgit v1.2.3 From 45977fe35bf014f5cf9552717e1320783398ae0d Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 11 Nov 2014 14:33:36 +0100 Subject: irqchip: atmel-aic: Fix irqdomain initialization First of all IRQCHIP_SKIP_SET_WAKE is not a valid irq_gc_flags and thus should not be passed as the last argument of irq_alloc_domain_generic_chips. Then pass the correct handler (handle_fasteoi_irq) to irq_alloc_domain_generic_chips instead of manually re-setting it in the initialization loop. And eventually initialize default irq flags to the pseudo standard: IRQ_REQUEST | IRQ_PROBE | IRQ_AUTOEN. Signed-off-by: Boris Brezillon Tested-by: Kevin Hilman Fixes: b1479ebb77200 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Cc: # v3.17+ Link: https://lkml.kernel.org/r/1415712816-9202-1-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Jason Cooper --- drivers/irqchip/irq-atmel-aic-common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-atmel-aic-common.c b/drivers/irqchip/irq-atmel-aic-common.c index 6ae3cdee0681..cc4f9d80122e 100644 --- a/drivers/irqchip/irq-atmel-aic-common.c +++ b/drivers/irqchip/irq-atmel-aic-common.c @@ -217,8 +217,9 @@ struct irq_domain *__init aic_common_of_init(struct device_node *node, } ret = irq_alloc_domain_generic_chips(domain, 32, 1, name, - handle_level_irq, 0, 0, - IRQCHIP_SKIP_SET_WAKE); + handle_fasteoi_irq, + IRQ_NOREQUEST | IRQ_NOPROBE | + IRQ_NOAUTOEN, 0, 0); if (ret) goto err_domain_remove; @@ -230,7 +231,6 @@ struct irq_domain *__init aic_common_of_init(struct device_node *node, gc->unused = 0; gc->wake_enabled = ~0; gc->chip_types[0].type = IRQ_TYPE_SENSE_MASK; - gc->chip_types[0].handler = handle_fasteoi_irq; gc->chip_types[0].chip.irq_eoi = irq_gc_eoi; gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; gc->chip_types[0].chip.irq_shutdown = aic_common_shutdown; -- cgit v1.2.3 From 1f9cd915b64bb95f7b41667b4bf8b22f0a0a557b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 11 Nov 2014 19:35:52 +0100 Subject: dmaengine: sun6i: Fix memcpy operation The prep_memcpy call was not setting any meaningful burst and width because it was relying on the dma_slave_config was not set already. Rework the needed conversion functions, and hardcode the width and burst to use. Signed-off-by: Maxime Ripard Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul --- drivers/dma/sun6i-dma.c | 61 ++++++++++++++++++++++++------------------------- 1 file changed, 30 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index 3aa10b328254..91292f5513ff 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -230,30 +230,25 @@ static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev, readl(pchan->base + DMA_CHAN_CUR_PARA)); } -static inline int convert_burst(u32 maxburst, u8 *burst) +static inline s8 convert_burst(u32 maxburst) { switch (maxburst) { case 1: - *burst = 0; - break; + return 0; case 8: - *burst = 2; - break; + return 2; default: return -EINVAL; } - - return 0; } -static inline int convert_buswidth(enum dma_slave_buswidth addr_width, u8 *width) +static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width) { if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) || (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)) return -EINVAL; - *width = addr_width >> 1; - return 0; + return addr_width >> 1; } static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev, @@ -284,26 +279,25 @@ static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli, struct dma_slave_config *config) { u8 src_width, dst_width, src_burst, dst_burst; - int ret; if (!config) return -EINVAL; - ret = convert_burst(config->src_maxburst, &src_burst); - if (ret) - return ret; + src_burst = convert_burst(config->src_maxburst); + if (src_burst) + return src_burst; - ret = convert_burst(config->dst_maxburst, &dst_burst); - if (ret) - return ret; + dst_burst = convert_burst(config->dst_maxburst); + if (dst_burst) + return dst_burst; - ret = convert_buswidth(config->src_addr_width, &src_width); - if (ret) - return ret; + src_width = convert_buswidth(config->src_addr_width); + if (src_width) + return src_width; - ret = convert_buswidth(config->dst_addr_width, &dst_width); - if (ret) - return ret; + dst_width = convert_buswidth(config->dst_addr_width); + if (dst_width) + return dst_width; lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) | DMA_CHAN_CFG_SRC_WIDTH(src_width) | @@ -542,11 +536,10 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy( { struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device); struct sun6i_vchan *vchan = to_sun6i_vchan(chan); - struct dma_slave_config *sconfig = &vchan->cfg; struct sun6i_dma_lli *v_lli; struct sun6i_desc *txd; dma_addr_t p_lli; - int ret; + s8 burst, width; dev_dbg(chan2dev(chan), "%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n", @@ -565,14 +558,21 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy( goto err_txd_free; } - ret = sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig); - if (ret) - goto err_dma_free; + v_lli->src = src; + v_lli->dst = dest; + v_lli->len = len; + v_lli->para = NORMAL_WAIT; + burst = convert_burst(8); + width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES); v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) | DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) | DMA_CHAN_CFG_DST_LINEAR_MODE | - DMA_CHAN_CFG_SRC_LINEAR_MODE; + DMA_CHAN_CFG_SRC_LINEAR_MODE | + DMA_CHAN_CFG_SRC_BURST(burst) | + DMA_CHAN_CFG_SRC_WIDTH(width) | + DMA_CHAN_CFG_DST_BURST(burst) | + DMA_CHAN_CFG_DST_WIDTH(width); sun6i_dma_lli_add(NULL, v_lli, p_lli, txd); @@ -580,8 +580,6 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy( return vchan_tx_prep(&vchan->vc, &txd->vd, flags); -err_dma_free: - dma_pool_free(sdev->pool, v_lli, p_lli); err_txd_free: kfree(txd); return NULL; @@ -915,6 +913,7 @@ static int sun6i_dma_probe(struct platform_device *pdev) sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy; sdc->slave.device_control = sun6i_dma_control; sdc->slave.chancnt = NR_MAX_VCHANS; + sdc->slave.copy_align = 4; sdc->slave.dev = &pdev->dev; -- cgit v1.2.3 From 336b5be2c56f3cf2252f5a39d344ef67cf9bdf7a Mon Sep 17 00:00:00 2001 From: Duc Dang Date: Thu, 6 Nov 2014 17:14:18 -0800 Subject: PCI: xgene: Assign resources to bus before adding new devices The X-Gene PCIe driver assumes pci_scan_root_bus() assigns resources as proposed in [1]. But we dropped patch [1] because it would break some architectures, which means the X-Gene PCIe driver is currently broken. Add calls to scan the bus, assign resources, and add devices in the X-Gene driver to fix this. [bhelgaas: changelog] [1] http://lkml.kernel.org/r/1412000971-9242-11-git-send-email-Liviu.Dudau@arm.com Signed-off-by: Duc Dang Signed-off-by: Tanmay Inamdar Signed-off-by: Bjorn Helgaas --- drivers/pci/host/pci-xgene.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c index 9ecabfa8c634..2988fe136c1e 100644 --- a/drivers/pci/host/pci-xgene.c +++ b/drivers/pci/host/pci-xgene.c @@ -631,10 +631,15 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev) if (ret) return ret; - bus = pci_scan_root_bus(&pdev->dev, 0, &xgene_pcie_ops, port, &res); + bus = pci_create_root_bus(&pdev->dev, 0, + &xgene_pcie_ops, port, &res); if (!bus) return -ENOMEM; + pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); + pci_bus_add_devices(bus); + platform_set_drvdata(pdev, port); return 0; } -- cgit v1.2.3 From 7a1562d4f2d01721ad07c3a326db7512077ceea9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 11 Nov 2014 12:09:46 -0800 Subject: PCI: Apply _HPX Link Control settings to all devices with a link Previously we applied _HPX type 2 record Link Control register settings only to bridges with a subordinate bus. But it's better to apply them to all devices with a link because if the subordinate bus has not been allocated yet, we won't apply settings to the device. Use pcie_cap_has_lnkctl() to determine whether the device has a Link Control register instead of looking at dev->subordinate. [bhelgaas: changelog] Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- drivers/pci/access.c | 2 +- drivers/pci/pci.h | 2 ++ drivers/pci/probe.c | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/access.c b/drivers/pci/access.c index d292d7cb3417..49dd766852ba 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -444,7 +444,7 @@ static inline int pcie_cap_version(const struct pci_dev *dev) return pcie_caps_reg(dev) & PCI_EXP_FLAGS_VERS; } -static inline bool pcie_cap_has_lnkctl(const struct pci_dev *dev) +bool pcie_cap_has_lnkctl(const struct pci_dev *dev) { int type = pci_pcie_type(dev); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0601890db22d..4a3902d8e6fe 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -6,6 +6,8 @@ extern const unsigned char pcie_link_speed[]; +bool pcie_cap_has_lnkctl(const struct pci_dev *dev); + /* Functions internal to the PCI core code */ int pci_create_sysfs_dev_files(struct pci_dev *pdev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 5ed99309c758..6244b1834dfe 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1323,7 +1323,7 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp) ~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or); /* Initialize Link Control Register */ - if (dev->subordinate) + if (pcie_cap_has_lnkctl(dev)) pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, ~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or); -- cgit v1.2.3 From 23e62de33d179e229e4c1dfd93f90a3c7355c519 Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Thu, 13 Nov 2014 16:38:12 -0800 Subject: net: Add vxlan_gso_check() helper Most NICs that report NETIF_F_GSO_UDP_TUNNEL support VXLAN, and not other UDP-based encapsulation protocols where the format and size of the header differs. This patch implements a generic ndo_gso_check() for VXLAN which will only advertise GSO support when the skb looks like it contains VXLAN (or no UDP tunnelling at all). Implementation shamelessly stolen from Tom Herbert: http://thread.gmane.org/gmane.linux.network/332428/focus=333111 Signed-off-by: Joe Stringer Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 13 +++++++++++++ include/net/vxlan.h | 2 ++ 2 files changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index fa9dc45b75a6..6b658638b456 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1571,6 +1571,19 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) return false; } +bool vxlan_gso_check(struct sk_buff *skb) +{ + if ((skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) && + (skb->inner_protocol_type != ENCAP_TYPE_ETHER || + skb->inner_protocol != htons(ETH_P_TEB) || + (skb_inner_mac_header(skb) - skb_transport_header(skb) != + sizeof(struct udphdr) + sizeof(struct vxlanhdr)))) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(vxlan_gso_check); + #if IS_ENABLED(CONFIG_IPV6) static int vxlan6_xmit_skb(struct vxlan_sock *vs, struct dst_entry *dst, struct sk_buff *skb, diff --git a/include/net/vxlan.h b/include/net/vxlan.h index d5f59f3fc35d..afadf8e53f20 100644 --- a/include/net/vxlan.h +++ b/include/net/vxlan.h @@ -45,6 +45,8 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, __be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df, __be16 src_port, __be16 dst_port, __be32 vni, bool xnet); +bool vxlan_gso_check(struct sk_buff *skb); + /* IP header + UDP + VXLAN + Ethernet header */ #define VXLAN_HEADROOM (20 + 8 + 8 + 14) /* IPv6 header + UDP + VXLAN + Ethernet header */ -- cgit v1.2.3 From 725d548f14362f10c9235ee4b32dc22e7c55e50c Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Thu, 13 Nov 2014 16:38:13 -0800 Subject: be2net: Implement ndo_gso_check() Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9a18e7930b31..3e8475cae4f9 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4421,6 +4421,11 @@ static void be_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family, "Disabled VxLAN offloads for UDP port %d\n", be16_to_cpu(port)); } + +static bool be_gso_check(struct sk_buff *skb, struct net_device *dev) +{ + return vxlan_gso_check(skb); +} #endif static const struct net_device_ops be_netdev_ops = { @@ -4450,6 +4455,7 @@ static const struct net_device_ops be_netdev_ops = { #ifdef CONFIG_BE2NET_VXLAN .ndo_add_vxlan_port = be_add_vxlan_port, .ndo_del_vxlan_port = be_del_vxlan_port, + .ndo_gso_check = be_gso_check, #endif }; -- cgit v1.2.3 From 956bdab2e439881e151b7a1779e7f12a3778b68d Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Thu, 13 Nov 2014 16:38:14 -0800 Subject: net/mlx4_en: Implement ndo_gso_check() Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 02266e3de514..c5fcc56ec06b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2355,6 +2355,11 @@ static void mlx4_en_del_vxlan_port(struct net_device *dev, queue_work(priv->mdev->workqueue, &priv->vxlan_del_task); } + +static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev) +{ + return vxlan_gso_check(skb); +} #endif static const struct net_device_ops mlx4_netdev_ops = { @@ -2386,6 +2391,7 @@ static const struct net_device_ops mlx4_netdev_ops = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, + .ndo_gso_check = mlx4_en_gso_check, #endif }; -- cgit v1.2.3 From 795a05c1c2a012ab2fd08f1523aa3c529049d291 Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Thu, 13 Nov 2014 16:38:15 -0800 Subject: qlcnic: Implement ndo_gso_check() Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer Acked-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f5e29f7bdae3..a913b3ad2f89 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -503,6 +503,11 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev, adapter->flags |= QLCNIC_DEL_VXLAN_PORT; } + +static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev) +{ + return vxlan_gso_check(skb); +} #endif static const struct net_device_ops qlcnic_netdev_ops = { @@ -526,6 +531,7 @@ static const struct net_device_ops qlcnic_netdev_ops = { #ifdef CONFIG_QLCNIC_VXLAN .ndo_add_vxlan_port = qlcnic_add_vxlan_port, .ndo_del_vxlan_port = qlcnic_del_vxlan_port, + .ndo_gso_check = qlcnic_gso_check, #endif #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = qlcnic_poll_controller, -- cgit v1.2.3 From e90dea6aafa14eb60ab0927f6fe54c620f61ef74 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Mon, 10 Nov 2014 10:20:16 +0200 Subject: iio: accel: kxcjk-1013: Fix kxcjk10013_set_range Currently, we get the new GSEL bits by OR-ing the old values with the new ones. This only works first time when the old values are 0. Startup: * GSEL0 = 0, GSEL1 = 0 Set range to 4G: (GSEL0 = 1, GSEL1 = 0) * GSEL0 = 0 | 1 = 1 * GSEL1 = 0 | 0 = 0 * correct Change range to 2G: (GSEL0 = 0, GSEL1 = 0) * GSEL0 = 1 | 0 = 1 * GSEL1 = 0 | 0 = 0 * wrong, GSEL0 should be 0 This has the nice effect that we can use the full scale range, exported in in_accel_scale_available. Fixes: a735e3d7f03 (iio: accel: kxcjk-1013: Set adjustable range) Signed-off-by: Daniel Baluta Reviewed-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxcjk-1013.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index a23e58c4ed99..320aa72c0349 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -269,6 +269,8 @@ static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index) return ret; } + ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 | + KXCJK1013_REG_CTRL1_BIT_GSEL1); ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3); ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4); -- cgit v1.2.3 From fbbba1f89eb68e7d07707e104193d56de8e37fe5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 10 Nov 2014 16:04:06 +0800 Subject: iio: adc: men_z188_adc: Add terminating entry for men_z188_ids The mcb_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/men_z188_adc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c index b58d6302521f..d095efe1ba14 100644 --- a/drivers/iio/adc/men_z188_adc.c +++ b/drivers/iio/adc/men_z188_adc.c @@ -152,6 +152,7 @@ static void men_z188_remove(struct mcb_device *dev) static const struct mcb_device_id men_z188_ids[] = { { .device = 0xbc }, + { } }; MODULE_DEVICE_TABLE(mcb, men_z188_ids); -- cgit v1.2.3 From 35717d8d6fc6fc50692273d6667a0a575c26aa93 Mon Sep 17 00:00:00 2001 From: John Ogness Date: Fri, 14 Nov 2014 15:42:52 +0100 Subject: drivers: net: cpsw: Fix TX_IN_SEL offset The TX_IN_SEL offset for the CPSW_PORT/TX_IN_CTL register was incorrect. This caused the Dual MAC mode to never get set when it should. It also caused possible unintentional setting of a bit in the CPSW_PORT/TX_BLKS_REM register. The purpose of setting the Dual MAC mode for this register is to: "... allow packets from both ethernet ports to be written into the FIFO without one port starving the other port." - AM335x ARM TRM Signed-off-by: John Ogness Reviewed-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index d8794488f80a..c560f9aeb55d 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -129,9 +129,9 @@ do { \ #define CPSW_VLAN_AWARE BIT(1) #define CPSW_ALE_VLAN_AWARE 1 -#define CPSW_FIFO_NORMAL_MODE (0 << 15) -#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15) -#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15) +#define CPSW_FIFO_NORMAL_MODE (0 << 16) +#define CPSW_FIFO_DUAL_MAC_MODE (1 << 16) +#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 16) #define CPSW_INTPACEEN (0x3f << 16) #define CPSW_INTPRESCALE_MASK (0x7FF << 0) -- cgit v1.2.3 From 8c2dd54485ccee7fc4086611e188478584758c8d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 15 Nov 2014 02:11:59 +0300 Subject: ieee802154: fix error handling in ieee802154fake_probe() In case of any failure ieee802154fake_probe() just calls unregister_netdev(). But it does not look safe to unregister netdevice before it was registered. The patch implements straightforward resource deallocation in case of failure in ieee802154fake_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/ieee802154/fakehard.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c index 9ce854f43917..6cbc56ad9ff4 100644 --- a/drivers/net/ieee802154/fakehard.c +++ b/drivers/net/ieee802154/fakehard.c @@ -377,17 +377,20 @@ static int ieee802154fake_probe(struct platform_device *pdev) err = wpan_phy_register(phy); if (err) - goto out; + goto err_phy_reg; err = register_netdev(dev); - if (err < 0) - goto out; + if (err) + goto err_netdev_reg; dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n"); return 0; -out: - unregister_netdev(dev); +err_netdev_reg: + wpan_phy_unregister(phy); +err_phy_reg: + free_netdev(dev); + wpan_phy_free(phy); return err; } -- cgit v1.2.3 From 10bef28973071266e85fe7ea50e08ce8f46dc1ca Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:33:25 -0700 Subject: iio: gyro: bmg160: Error handling when mode set fails When mode set fails due to some transient failures, it will atleast reset the state of runtime usage count and also let the runtime suspend retry from the driver framework. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/bmg160.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index 1f967e0d688e..22bf9db538b3 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -250,6 +250,9 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on) if (ret < 0) { dev_err(&data->client->dev, "Failed: bmg160_set_power_state for %d\n", on); + if (on) + pm_runtime_put_noidle(&data->client->dev); + return ret; } #endif @@ -705,6 +708,7 @@ static int bmg160_write_event_config(struct iio_dev *indio_dev, ret = bmg160_setup_any_motion_interrupt(data, state); if (ret < 0) { + bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } @@ -871,6 +875,7 @@ static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig, else ret = bmg160_setup_new_data_interrupt(data, state); if (ret < 0) { + bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } @@ -1169,8 +1174,15 @@ static int bmg160_runtime_suspend(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct bmg160_data *data = iio_priv(indio_dev); + int ret; - return bmg160_set_mode(data, BMG160_MODE_SUSPEND); + ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND); + if (ret < 0) { + dev_err(&data->client->dev, "set mode failed\n"); + return -EAGAIN; + } + + return 0; } static int bmg160_runtime_resume(struct device *dev) -- cgit v1.2.3 From 5af6b30788d4f745e62e5cb53850f80222571d3a Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:33:26 -0700 Subject: iio: gyro: bmg160: Don't let interrupt mode to be open drain Change the mode to push/pull type instead of open drain as some platforms fails to drive the GPIO pin with open drain. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/bmg160.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index 22bf9db538b3..fa2e3766d4a7 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -67,6 +67,9 @@ #define BMG160_REG_INT_EN_0 0x15 #define BMG160_DATA_ENABLE_INT BIT(7) +#define BMG160_REG_INT_EN_1 0x16 +#define BMG160_INT1_BIT_OD BIT(1) + #define BMG160_REG_XOUT_L 0x02 #define BMG160_AXIS_TO_REG(axis) (BMG160_REG_XOUT_L + (axis * 2)) @@ -222,6 +225,19 @@ static int bmg160_chip_init(struct bmg160_data *data) data->slope_thres = ret; /* Set default interrupt mode */ + ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_EN_1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_en_1\n"); + return ret; + } + ret &= ~BMG160_INT1_BIT_OD; + ret = i2c_smbus_write_byte_data(data->client, + BMG160_REG_INT_EN_1, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_en_1\n"); + return ret; + } + ret = i2c_smbus_write_byte_data(data->client, BMG160_REG_INT_RST_LATCH, BMG160_INT_MODE_LATCH_INT | -- cgit v1.2.3 From cb80f6a36be9b3007f23c2d37eddc90a37dac87f Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:33:27 -0700 Subject: iio: gyro: bmg160: Send x, y and z motion separately This chip is capable to identify motion across x, y and z axes. So send different events. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/bmg160.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index fa2e3766d4a7..9f751d6fac6f 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -85,6 +85,9 @@ #define BMG160_REG_INT_STATUS_2 0x0B #define BMG160_ANY_MOTION_MASK 0x07 +#define BMG160_ANY_MOTION_BIT_X BIT(0) +#define BMG160_ANY_MOTION_BIT_Y BIT(1) +#define BMG160_ANY_MOTION_BIT_Z BIT(2) #define BMG160_REG_TEMP 0x08 #define BMG160_TEMP_CENTER_VAL 23 @@ -929,10 +932,24 @@ static irqreturn_t bmg160_event_handler(int irq, void *private) else dir = IIO_EV_DIR_FALLING; - if (ret & BMG160_ANY_MOTION_MASK) + if (ret & BMG160_ANY_MOTION_BIT_X) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL, 0, - IIO_MOD_X_OR_Y_OR_Z, + IIO_MOD_X, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + if (ret & BMG160_ANY_MOTION_BIT_Y) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL, + 0, + IIO_MOD_Y, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + if (ret & BMG160_ANY_MOTION_BIT_Z) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL, + 0, + IIO_MOD_Z, IIO_EV_TYPE_ROC, dir), data->timestamp); -- cgit v1.2.3 From 6896ab3a8cfe383cc0c98790b62245a84c6335f7 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:33:28 -0700 Subject: iio: gyro: bmg160: Fix iio_event_spec direction Change event spec direction from IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING to IIO_EV_DIR_EITHER Suggested-by: Daniel Baluta Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/bmg160.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index 9f751d6fac6f..d2fa526740ca 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -766,7 +766,7 @@ static const struct attribute_group bmg160_attrs_group = { static const struct iio_event_spec bmg160_event = { .type = IIO_EV_TYPE_ROC, - .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING, + .dir = IIO_EV_DIR_EITHER, .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) }; -- cgit v1.2.3 From aaeecd80440bc5e06de7d2b741cd403325d8ca7a Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:35:31 -0700 Subject: iio: accel: bmc150: Error handling when mode set fails When mode set fails due to some transient failures, it will atleast reset the state of runtime usage count and also let the runtime suspend retry from the driver framework. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 22c096ce39ad..fdb101c48599 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -536,6 +536,9 @@ static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) if (ret < 0) { dev_err(&data->client->dev, "Failed: bmc150_accel_set_power_state for %d\n", on); + if (on) + pm_runtime_put_noidle(&data->client->dev); + return ret; } @@ -811,6 +814,7 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev, ret = bmc150_accel_setup_any_motion_interrupt(data, state); if (ret < 0) { + bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } @@ -1054,6 +1058,7 @@ static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig, else ret = bmc150_accel_setup_new_data_interrupt(data, state); if (ret < 0) { + bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } @@ -1354,10 +1359,14 @@ static int bmc150_accel_runtime_suspend(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; dev_dbg(&data->client->dev, __func__); + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); + if (ret < 0) + return -EAGAIN; - return bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); + return 0; } static int bmc150_accel_runtime_resume(struct device *dev) -- cgit v1.2.3 From 8d5a9781920171a36e5826248cd56b4b6a734335 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:35:32 -0700 Subject: iio: accel: bmc150: Send x, y and z motion separately This chip is capable to identify motion across x, y and z axes. So send different events. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index fdb101c48599..c6df8ee00c9d 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -44,6 +44,9 @@ #define BMC150_ACCEL_REG_INT_STATUS_2 0x0B #define BMC150_ACCEL_ANY_MOTION_MASK 0x07 +#define BMC150_ACCEL_ANY_MOTION_BIT_X BIT(0) +#define BMC150_ACCEL_ANY_MOTION_BIT_Y BIT(1) +#define BMC150_ACCEL_ANY_MOTION_BIT_Z BIT(2) #define BMC150_ACCEL_ANY_MOTION_BIT_SIGN BIT(3) #define BMC150_ACCEL_REG_PMU_LPW 0x11 @@ -1097,12 +1100,26 @@ static irqreturn_t bmc150_accel_event_handler(int irq, void *private) else dir = IIO_EV_DIR_RISING; - if (ret & BMC150_ACCEL_ANY_MOTION_MASK) + if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, - IIO_MOD_X_OR_Y_OR_Z, + IIO_MOD_X, IIO_EV_TYPE_ROC, - IIO_EV_DIR_EITHER), + dir), + data->timestamp); + if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_Y, + IIO_EV_TYPE_ROC, + dir), + data->timestamp); + if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_Z, + IIO_EV_TYPE_ROC, + dir), data->timestamp); ack_intr_status: if (!data->dready_trigger_on) -- cgit v1.2.3 From 1174124c45209796b1a2853a411cf47cbfcaf7da Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:35:34 -0700 Subject: iio: accel: bmc150: Fix iio_event_spec direction Change event spec direction from IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING to IIO_EV_DIR_EITHER Suggested-by: Daniel Baluta Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index c6df8ee00c9d..352d95963661 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -853,7 +853,7 @@ static const struct attribute_group bmc150_accel_attrs_group = { static const struct iio_event_spec bmc150_accel_event = { .type = IIO_EV_TYPE_ROC, - .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING, + .dir = IIO_EV_DIR_EITHER, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_PERIOD) -- cgit v1.2.3 From 9e8e228f2bf066c37eeee7c25b810cad3235427a Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 10 Oct 2014 20:35:33 -0700 Subject: iio: accel: bmc150: set low default thresholds Set the threshold to low by default. With this thresholds any movement on the device with this sensor will generate event. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 352d95963661..513bd6d14293 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -95,9 +95,9 @@ #define BMC150_ACCEL_SLOPE_THRES_MASK 0xFF /* Slope duration in terms of number of samples */ -#define BMC150_ACCEL_DEF_SLOPE_DURATION 2 +#define BMC150_ACCEL_DEF_SLOPE_DURATION 1 /* in terms of multiples of g's/LSB, based on range */ -#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 5 +#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 1 #define BMC150_ACCEL_REG_XOUT_L 0x02 -- cgit v1.2.3 From bb2bdeb83fb125c95e47fc7eca2a3e8f868e2a74 Mon Sep 17 00:00:00 2001 From: Martin Hauke Date: Sun, 16 Nov 2014 19:55:25 +0100 Subject: qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 22756db53dca..b8a82b86f909 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -780,6 +780,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ + {QMI_FIXED_INTF(0x03f0, 0x581d, 4)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.2.3 From bce4f9e764c36bc35dd5c9cf9e057c09f422397d Mon Sep 17 00:00:00 2001 From: Ben Sagal Date: Sun, 16 Nov 2014 17:23:40 -0800 Subject: Input: synaptics - adjust min/max on Thinkpad E540 The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Cc: stable@vger.kernel.org Signed-off-by: Binyamin Sagal Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 2a7a9174c702..f9472920d986 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -143,6 +143,10 @@ static const struct min_max_quirk min_max_pnpid_table[] = { (const char * const []){"LEN2001", NULL}, 1024, 5022, 2508, 4832 }, + { + (const char * const []){"LEN2006", NULL}, + 1264, 5675, 1171, 4688 + }, { } }; -- cgit v1.2.3 From 137bd11090d89b3a3ef4bdb7a6cf964ffc797517 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Fri, 7 Nov 2014 18:05:17 +0000 Subject: dmaengine: pl330: Align DMA memcpy operations to MFIFO width The algorithm used for programming the DMA Controller doesn't take into consideration the requirements of transfers that are not aligned to the bus width. This failure may result in DMA transferring one too few MFIFO entries (so too few bytes are copied) or the DMA trying to write one too many MFIFO entries and hanging because this is never provided. See "MFIFO Usage Overview" chapter in the the TRM for "CoreLink DMA Controller DMA-330", Revision r1p1. We work around these shortcomings by making sure we pick a burst size and length which ensures no bursts straddle an MFIFO entry. Signed-off-by: Jon Medhurst [squashed linker error "undefined reference to `__aeabi_uldivmod] Reported-by: kbuild test robot Acked-by: Arnd Bergmann Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 4839bfa74a10..81505420bde4 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2459,16 +2459,25 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, /* Select max possible burst size */ burst = pl330->pcfg.data_bus_width / 8; - while (burst > 1) { - if (!(len % burst)) - break; + /* + * Make sure we use a burst size that aligns with all the memcpy + * parameters because our DMA programming algorithm doesn't cope with + * transfers which straddle an entry in the DMA device's MFIFO. + */ + while ((src | dst | len) & (burst - 1)) burst /= 2; - } desc->rqcfg.brst_size = 0; while (burst != (1 << desc->rqcfg.brst_size)) desc->rqcfg.brst_size++; + /* + * If burst size is smaller than bus width then make sure we only + * transfer one at a time to avoid a burst stradling an MFIFO entry. + */ + if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width) + desc->rqcfg.brst_len = 1; + desc->rqcfg.brst_len = get_burst_len(desc, len); desc->txd.flags = flags; -- cgit v1.2.3 From c27f95568d1ed2573fc9c8848d741da63ca9a34e Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Fri, 7 Nov 2014 18:05:18 +0000 Subject: dmaengine: pl330: Limit MFIFO usage for memcpy to avoid exhausting entries The MFIFO is shared by all channels so restrict each memcpy to it's fair share. This is being over cautious, but without a global view of DMA channel usage on a system it's not possible to come up with a more optimum safe limit. Signed-off-by: Jon Medhurst Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 81505420bde4..e13b51a46502 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2336,7 +2336,7 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) int burst_len; burst_len = pl330->pcfg.data_bus_width / 8; - burst_len *= pl330->pcfg.data_buf_dep; + burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan; burst_len >>= desc->rqcfg.brst_size; /* src/dst_burst_len can't be more than 16 */ -- cgit v1.2.3 From 1f0a5cbf61a54504236bbbe2c98b58e85f90e650 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Thu, 6 Nov 2014 17:20:12 +0000 Subject: dmaengine: Fix allocation size for PL330 data buffer depth. The datasheet for PL330 says that the data buffer value in the CRD register is 10bits wide. However, the value stored is "minus one", which the driver corrects for. Maximum value that the data buffer depth can have is 1024 lines, which requires 11 bits for storage. While making updates I found printing the peripheral ID as a hex value to be more useful as the datasheet shows the values that way. Signed-off-by: Liviu Dudau Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index e13b51a46502..19a99743cf52 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -271,7 +271,7 @@ struct pl330_config { #define DMAC_MODE_NS (1 << 0) unsigned int mode; unsigned int data_bus_width:10; /* In number of bits */ - unsigned int data_buf_dep:10; + unsigned int data_buf_dep:11; unsigned int num_chan:4; unsigned int num_peri:6; u32 peri_ns; @@ -2741,7 +2741,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) dev_info(&adev->dev, - "Loaded driver for PL330 DMAC-%d\n", adev->periphid); + "Loaded driver for PL330 DMAC-%x\n", adev->periphid); dev_info(&adev->dev, "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan, -- cgit v1.2.3 From 2208d655a91f9879bd9a39ff9df05dd668b3512c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 14 Nov 2014 09:25:29 +0100 Subject: drm/i915: drop WaSetupGtModeTdRowDispatch:snb This reverts the regressing commit 6547fbdbfff62c99e4f7b4f985ff8b3454f33b0f Author: Daniel Vetter Date: Fri Dec 14 23:38:29 2012 +0100 drm/i915: Implement WaSetupGtModeTdRowDispatch that causes GPU hangs immediately on boot. Reported-by: Leo Wolf Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79996 Cc: stable@vger.kernel.org (v3.8+) Signed-off-by: Daniel Vetter [Jani: amended the commit message slightly.] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index c27b6140bfd1..ad2fd605f76b 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5469,11 +5469,6 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(_3D_CHICKEN, _MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB)); - /* WaSetupGtModeTdRowDispatch:snb */ - if (IS_SNB_GT1(dev)) - I915_WRITE(GEN6_GT_MODE, - _MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE)); - /* WaDisable_RenderCache_OperationalFlush:snb */ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); -- cgit v1.2.3 From 0485c9dc24ec0939b42ca5104c0373297506b555 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 14 Nov 2014 10:09:49 +0100 Subject: drm/i915: Kick fbdev before vgacon It's magic, but it seems to work. This fixes a regression introduced in commit 1bb9e632a0aeee1121e652ee4dc80e5e6f14bcd2 Author: Daniel Vetter Date: Tue Jul 8 10:02:43 2014 +0200 drm/i915: Only unbind vgacon, not other console drivers My best guess is that the vga fbdev driver falls over if we rip out parts of vgacon. Hooray. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82439 Cc: stable@vger.kernel.org (v3.16+) Reported-and-tested-by: Lv Zheng Signed-off-by: Daniel Vetter Acked-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_dma.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 1403b01e8216..318ade9bb5af 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1670,15 +1670,17 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto out_regs; if (drm_core_check_feature(dev, DRIVER_MODESET)) { - ret = i915_kick_out_vgacon(dev_priv); + /* WARNING: Apparently we must kick fbdev drivers before vgacon, + * otherwise the vga fbdev driver falls over. */ + ret = i915_kick_out_firmware_fb(dev_priv); if (ret) { - DRM_ERROR("failed to remove conflicting VGA console\n"); + DRM_ERROR("failed to remove conflicting framebuffer drivers\n"); goto out_gtt; } - ret = i915_kick_out_firmware_fb(dev_priv); + ret = i915_kick_out_vgacon(dev_priv); if (ret) { - DRM_ERROR("failed to remove conflicting framebuffer drivers\n"); + DRM_ERROR("failed to remove conflicting VGA console\n"); goto out_gtt; } } -- cgit v1.2.3 From c1aefbdd050e1fb15e92bcaf34d95b17ea952097 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 17 Nov 2014 09:14:31 +0000 Subject: spi: Fix mapping from vmalloc-ed buffer to scatter list We can only use page_address on memory that has been mapped using kmap, when the buffer passed to the SPI has been allocated by vmalloc the page has not necessarily been mapped through kmap. This means sometimes page_address will return NULL causing the pointer we pass to sg_set_buf to be invalid. As we only call page_address so that we can pass a virtual address to sg_set_buf which will then immediately call virt_to_page on it, fix this by calling sg_set_page directly rather then relying on the sg_set_buf helper. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ebcb33df2eb2..50f20f243981 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -615,13 +615,13 @@ static int spi_map_buf(struct spi_master *master, struct device *dev, sg_free_table(sgt); return -ENOMEM; } - sg_buf = page_address(vm_page) + - ((size_t)buf & ~PAGE_MASK); + sg_set_page(&sgt->sgl[i], vm_page, + min, offset_in_page(buf)); } else { sg_buf = buf; + sg_set_buf(&sgt->sgl[i], sg_buf, min); } - sg_set_buf(&sgt->sgl[i], sg_buf, min); buf += min; len -= min; -- cgit v1.2.3 From ff553ea1a3d5b903becda790eeb6bd3debf239f9 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 14 Nov 2014 19:54:49 +0100 Subject: clk: at91: usb: fix at91rm9200 round and set rate at91rm9200_clk_usb_set_rate might fail depending on the requested rate, because the parent_rate / rate remainder is not necessarily zero. Moreover, when rounding down the calculated rate we might alter the divisor calculation and end up with an invalid divisor. To solve those problems, accept a non zero remainder, and always round division to the closest result. Signed-off-by: Boris Brezillon Reported-by: Andreas Henriksson Tested-by: Andreas Henriksson Acked-by: Nicolas Ferre Signed-off-by: Michael Turquette --- drivers/clk/at91/clk-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 24b5b020753a..5b3b63c07524 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -253,7 +253,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate, tmp_parent_rate = rate * usb->divisors[i]; tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate); - tmprate = tmp_parent_rate / usb->divisors[i]; + tmprate = DIV_ROUND_CLOSEST(tmp_parent_rate, usb->divisors[i]); if (tmprate < rate) tmpdiff = rate - tmprate; else @@ -281,10 +281,10 @@ static int at91rm9200_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate, struct at91_pmc *pmc = usb->pmc; unsigned long div; - if (!rate || parent_rate % rate) + if (!rate) return -EINVAL; - div = parent_rate / rate; + div = DIV_ROUND_CLOSEST(parent_rate, rate); for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) { if (usb->divisors[i] == div) { -- cgit v1.2.3 From 69daf75aafc8410ef046c70be65c71f2dd4e08f9 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 17 Nov 2014 14:16:56 +0100 Subject: clk: at91: usb: fix at91sam9x5 recalc, round and set rate First check for rate == 0 in set_rate and round_rate to avoid div by zero. Then, in order to get the closest rate, round all divisions to the closest result instead of rounding them down. Signed-off-by: Boris Brezillon Acked-by: Nicolas Ferre Signed-off-by: Michael Turquette --- drivers/clk/at91/clk-usb.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 5b3b63c07524..a23ac0c724f0 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -52,29 +52,26 @@ static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw, tmp = pmc_read(pmc, AT91_PMC_USB); usbdiv = (tmp & AT91_PMC_OHCIUSBDIV) >> SAM9X5_USB_DIV_SHIFT; - return parent_rate / (usbdiv + 1); + + return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1)); } static long at91sam9x5_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { unsigned long div; - unsigned long bestrate; - unsigned long tmp; + + if (!rate) + return -EINVAL; if (rate >= *parent_rate) return *parent_rate; - div = *parent_rate / rate; - if (div >= SAM9X5_USB_MAX_DIV) - return *parent_rate / (SAM9X5_USB_MAX_DIV + 1); - - bestrate = *parent_rate / div; - tmp = *parent_rate / (div + 1); - if (bestrate - rate > rate - tmp) - bestrate = tmp; + div = DIV_ROUND_CLOSEST(*parent_rate, rate); + if (div > SAM9X5_USB_MAX_DIV + 1) + div = SAM9X5_USB_MAX_DIV + 1; - return bestrate; + return DIV_ROUND_CLOSEST(*parent_rate, div); } static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index) @@ -106,9 +103,13 @@ static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate, u32 tmp; struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw); struct at91_pmc *pmc = usb->pmc; - unsigned long div = parent_rate / rate; + unsigned long div; - if (parent_rate % rate || div < 1 || div >= SAM9X5_USB_MAX_DIV) + if (!rate) + return -EINVAL; + + div = DIV_ROUND_CLOSEST(parent_rate, rate); + if (div > SAM9X5_USB_MAX_DIV + 1 || !div) return -EINVAL; tmp = pmc_read(pmc, AT91_PMC_USB) & ~AT91_PMC_OHCIUSBDIV; -- cgit v1.2.3 From 9a6cb70f40b0268297024949eb0a2689e3b7769b Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Fri, 10 Oct 2014 16:57:24 +0300 Subject: clk: qcom: Fix duplicate rbcpr clock name There is a duplication in a clock name for apq8084 platform that causes the following warning: "RBCPR_CLK_SRC" redefined Resolve this by adding a MMSS_ prefix to this clock and making its name coherent with msm8974 platform. Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support") Signed-off-by: Georgi Djakov Reviewed-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/qcom/mmcc-apq8084.c | 2 +- include/dt-bindings/clock/qcom,mmcc-apq8084.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c index dab988ab8cf1..157139a5c1ca 100644 --- a/drivers/clk/qcom/mmcc-apq8084.c +++ b/drivers/clk/qcom/mmcc-apq8084.c @@ -3122,7 +3122,7 @@ static struct clk_regmap *mmcc_apq8084_clocks[] = { [ESC1_CLK_SRC] = &esc1_clk_src.clkr, [HDMI_CLK_SRC] = &hdmi_clk_src.clkr, [VSYNC_CLK_SRC] = &vsync_clk_src.clkr, - [RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr, + [MMSS_RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr, [RBBMTIMER_CLK_SRC] = &rbbmtimer_clk_src.clkr, [MAPLE_CLK_SRC] = &maple_clk_src.clkr, [VDP_CLK_SRC] = &vdp_clk_src.clkr, diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h index a929f86d0ddd..d72b5b35f15e 100644 --- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h +++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h @@ -60,7 +60,7 @@ #define ESC1_CLK_SRC 43 #define HDMI_CLK_SRC 44 #define VSYNC_CLK_SRC 45 -#define RBCPR_CLK_SRC 46 +#define MMSS_RBCPR_CLK_SRC 46 #define RBBMTIMER_CLK_SRC 47 #define MAPLE_CLK_SRC 48 #define VDP_CLK_SRC 49 -- cgit v1.2.3 From e6d5e7d90be92cee626d7ec16ca9b06f1eed710b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 14 Nov 2014 15:32:09 +0000 Subject: clk-divider: Fix READ_ONLY when divider > 1 Commit 79c6ab509558 (clk: divider: add CLK_DIVIDER_READ_ONLY flag) in v3.16 introduced the CLK_DIVIDER_READ_ONLY flag which caused the recalc_rate() and round_rate() clock callbacks to be omitted. However using this flag has the unfortunate side effect of causing the clock recalculation code when a clock rate change is attempted to always treat it as a pass-through clock, i.e. with a fixed divide of 1, which may not be the case. Child clock rates are then recalculated using the wrong parent rate. Therefore instead of dropping the recalc_rate() and round_rate() callbacks, alter clk_divider_bestdiv() to always report the current divider as the best divider so that it is never altered. For me the read only clock was the system clock, which divided the PLL rate by 2, from which both the UART and the SPI clocks were divided. Initial setting of the UART rate set it correctly, but when the SPI clock was set, the other child clocks were miscalculated. The UART clock was recalculated using the PLL rate as the parent rate, resulting in a UART new_rate of double what it should be, and a UART which spewed forth garbage when the rate changes were propagated. Signed-off-by: James Hogan Cc: Thomas Abraham Cc: Tomasz Figa Cc: Max Schwarz Cc: # v3.16+ Acked-by: Haojian Zhuang Signed-off-by: Michael Turquette --- drivers/clk/clk-divider.c | 18 +++++++++--------- drivers/clk/rockchip/clk.c | 4 +--- include/linux/clk-provider.h | 1 - 3 files changed, 10 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 18a9de29df0e..c0a842b335c5 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -263,6 +263,14 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, if (!rate) rate = 1; + /* if read only, just return current value */ + if (divider->flags & CLK_DIVIDER_READ_ONLY) { + bestdiv = readl(divider->reg) >> divider->shift; + bestdiv &= div_mask(divider); + bestdiv = _get_div(divider, bestdiv); + return bestdiv; + } + maxdiv = _get_maxdiv(divider); if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { @@ -361,11 +369,6 @@ const struct clk_ops clk_divider_ops = { }; EXPORT_SYMBOL_GPL(clk_divider_ops); -const struct clk_ops clk_divider_ro_ops = { - .recalc_rate = clk_divider_recalc_rate, -}; -EXPORT_SYMBOL_GPL(clk_divider_ro_ops); - static struct clk *_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -391,10 +394,7 @@ static struct clk *_register_divider(struct device *dev, const char *name, } init.name = name; - if (clk_divider_flags & CLK_DIVIDER_READ_ONLY) - init.ops = &clk_divider_ro_ops; - else - init.ops = &clk_divider_ops; + init.ops = &clk_divider_ops; init.flags = flags | CLK_IS_BASIC; init.parent_names = (parent_name ? &parent_name: NULL); init.num_parents = (parent_name ? 1 : 0); diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 1e68bff481b8..880a266f0143 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -90,9 +90,7 @@ static struct clk *rockchip_clk_register_branch(const char *name, div->width = div_width; div->lock = lock; div->table = div_table; - div_ops = (div_flags & CLK_DIVIDER_READ_ONLY) - ? &clk_divider_ro_ops - : &clk_divider_ops; + div_ops = &clk_divider_ops; } clk = clk_register_composite(NULL, name, parent_names, num_parents, diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index be21af149f11..2839c639f092 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -352,7 +352,6 @@ struct clk_divider { #define CLK_DIVIDER_READ_ONLY BIT(5) extern const struct clk_ops clk_divider_ops; -extern const struct clk_ops clk_divider_ro_ops; struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, -- cgit v1.2.3 From dcf3d458304aafda3d12413ade39fdf19740dbc3 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Tue, 7 Oct 2014 01:07:57 +0200 Subject: clk: pxa: fix pxa27x CCCR bit usage Trivial fix to check the A bit of CCCR for memory frequency calculations, where the shift of the bit index was missing, triggering a wrong calculation of memory frequency. Signed-off-by: Robert Jarzmik Signed-off-by: Michael Turquette --- drivers/clk/pxa/clk-pxa27x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c index b345cc791e5d..88b9fe13fa44 100644 --- a/drivers/clk/pxa/clk-pxa27x.c +++ b/drivers/clk/pxa/clk-pxa27x.c @@ -322,7 +322,7 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw, unsigned long ccsr = CCSR; osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); - a = cccr & CCCR_A_BIT; + a = cccr & (1 << CCCR_A_BIT); l = ccsr & CCSR_L_MASK; if (osc_forced || a) @@ -341,7 +341,7 @@ static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw) unsigned long ccsr = CCSR; osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); - a = cccr & CCCR_A_BIT; + a = cccr & (1 << CCCR_A_BIT); if (osc_forced) return PXA_MEM_13Mhz; if (a) -- cgit v1.2.3 From daad1660285a967b5da363e8de264e86b4a496a0 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Tue, 4 Nov 2014 15:22:50 -0800 Subject: ath9k: fix regression in bssidmask calculation The commit that went into 3.17: ath9k: Summarize hw state per channel context Group and set hw state (opmode, primary_sta, beacon conf) per channel context instead of whole list of vifs. This would allow each channel context to run in different mode (STA/AP). Signed-off-by: Felix Fietkau Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville broke multi-vif configuration due to not properly calculating the bssid mask. The test case that caught this was: create wlan0 and sta0-4 (6 total), not sure how much that matters. associate all 6 (works fine) disconnect 5 of them, leaving sta0 up Start trying to bring up the other 5 one at a time. It will fail, with iw events looking like this (in these logs, several sta are trying to come up, but symptom is the same with just one) The patch causing the regression made quite a few changes, but the part I think caused this particular problem was not recalculating the bssid mask when adding and removing interfaces. Re-adding those calls fixes my test case. Fix bad comment as well. Signed-off-by: Ben Greear Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 30c66dfcd7a0..4f18a6be0c7d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -974,9 +974,8 @@ void ath9k_calculate_iter_data(struct ath_softc *sc, struct ath_vif *avp; /* - * Pick the MAC address of the first interface as the new hardware - * MAC address. The hardware will use it together with the BSSID mask - * when matching addresses. + * The hardware will use primary station addr together with the + * BSSID mask when matching addresses. */ memset(iter_data, 0, sizeof(*iter_data)); memset(&iter_data->mask, 0xff, ETH_ALEN); @@ -1205,6 +1204,8 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, list_add_tail(&avp->list, &avp->chanctx->vifs); } + ath9k_calculate_summary_state(sc, avp->chanctx); + ath9k_assign_hw_queues(hw, vif); an->sc = sc; @@ -1274,6 +1275,8 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, ath_tx_node_cleanup(sc, &avp->mcast_node); + ath9k_calculate_summary_state(sc, avp->chanctx); + mutex_unlock(&sc->mutex); } -- cgit v1.2.3 From 8180bd47b043507568056f74f69b6a5abea26514 Mon Sep 17 00:00:00 2001 From: Mathy Vanhoef Date: Wed, 12 Nov 2014 21:33:34 -0500 Subject: brcmfmac: kill URB when request timed out Kill the submitted URB in brcmf_usb_dl_cmd if the request timed out. This assures the URB is never submitted twice. It also prevents a possible use-after-free of the URB transfer buffer if a timeout occurs. Signed-off-by: Mathy Vanhoef Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index dc135915470d..875d1142c8b0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -669,10 +669,12 @@ static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd, goto finalize; } - if (!brcmf_usb_ioctl_resp_wait(devinfo)) + if (!brcmf_usb_ioctl_resp_wait(devinfo)) { + usb_kill_urb(devinfo->ctl_urb); ret = -ETIMEDOUT; - else + } else { memcpy(buffer, tmpbuf, buflen); + } finalize: kfree(tmpbuf); -- cgit v1.2.3 From 4c69f05eaa428e37890daf88b86a567ce615570b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 14 Nov 2014 14:12:21 -0800 Subject: brcmfmac: fix error handling of irq_of_parse_and_map Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov Cc: stable@vger.kernel.org # v3.17 Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/of.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/of.c b/drivers/net/wireless/brcm80211/brcmfmac/of.c index f05f5270fec1..927bffd5be64 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/of.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/of.c @@ -40,8 +40,8 @@ void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev) return; irq = irq_of_parse_and_map(np, 0); - if (irq < 0) { - brcmf_err("interrupt could not be mapped: err=%d\n", irq); + if (!irq) { + brcmf_err("interrupt could not be mapped\n"); devm_kfree(dev, sdiodev->pdata); return; } -- cgit v1.2.3 From 5247a589c24022ab34e780039cc8000c48f2035e Mon Sep 17 00:00:00 2001 From: Thomas Körper Date: Fri, 31 Oct 2014 07:33:54 +0100 Subject: can: dev: avoid calling kfree_skb() from interrupt context MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ikfree_skb() is Called in can_free_echo_skb(), which might be called from (TX Error) interrupt, which triggers the folloing warning: [ 1153.360705] ------------[ cut here ]------------ [ 1153.360715] WARNING: CPU: 0 PID: 31 at net/core/skbuff.c:563 skb_release_head_state+0xb9/0xd0() [ 1153.360772] Call Trace: [ 1153.360778] [] dump_stack+0x41/0x52 [ 1153.360782] [] warn_slowpath_common+0x7e/0xa0 [ 1153.360784] [] ? skb_release_head_state+0xb9/0xd0 [ 1153.360786] [] ? skb_release_head_state+0xb9/0xd0 [ 1153.360788] [] warn_slowpath_null+0x22/0x30 [ 1153.360791] [] skb_release_head_state+0xb9/0xd0 [ 1153.360793] [] skb_release_all+0x10/0x30 [ 1153.360795] [] kfree_skb+0x36/0x80 [ 1153.360799] [] ? can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360802] [] can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360805] [] esd_pci402_interrupt+0x34c/0x57a [esd402] [ 1153.360809] [] handle_irq_event_percpu+0x35/0x180 [ 1153.360811] [] ? handle_irq_event_percpu+0xa3/0x180 [ 1153.360813] [] handle_irq_event+0x31/0x50 [ 1153.360816] [] handle_fasteoi_irq+0x6f/0x120 [ 1153.360818] [] ? handle_edge_irq+0x110/0x110 [ 1153.360822] [] handle_irq+0x71/0x90 [ 1153.360823] [] do_IRQ+0x3c/0xd0 [ 1153.360829] [] common_interrupt+0x2c/0x34 [ 1153.360834] [] ? finish_task_switch+0x47/0xf0 [ 1153.360836] [] __schedule+0x35b/0x7e0 [ 1153.360839] [] ? console_unlock+0x2c4/0x4d0 [ 1153.360842] [] ? n_tty_receive_buf_common+0x890/0x890 [ 1153.360845] [] ? process_one_work+0x196/0x370 [ 1153.360847] [] schedule+0x23/0x60 [ 1153.360849] [] worker_thread+0x161/0x460 [ 1153.360852] [] ? __wake_up_locked+0x1f/0x30 [ 1153.360854] [] ? rescuer_thread+0x2f0/0x2f0 [ 1153.360856] [] kthread+0xa1/0xc0 [ 1153.360859] [] ret_from_kernel_thread+0x21/0x30 [ 1153.360861] [] ? kthread_create_on_node+0x110/0x110 [ 1153.360863] ---[ end trace 5ff83639cbb74b35 ]--- This patch replaces the kfree_skb() by dev_kfree_skb_any(). Signed-off-by: Thomas Körper Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 02492d241e4c..509d5e063d8c 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -382,7 +382,7 @@ void can_free_echo_skb(struct net_device *dev, unsigned int idx) BUG_ON(idx >= priv->echo_skb_max); if (priv->echo_skb[idx]) { - kfree_skb(priv->echo_skb[idx]); + dev_kfree_skb_any(priv->echo_skb[idx]); priv->echo_skb[idx] = NULL; } } -- cgit v1.2.3 From 67b5909edccfe3ea3b85b1d96284d2c53e3fd47c Mon Sep 17 00:00:00 2001 From: Roman Fietze Date: Mon, 20 Oct 2014 10:32:42 +0200 Subject: can: dev: fix typo CIA -> CiA, CAN in Automation This patch fixes a typo in CAN's dev.c: CIA -> CiA which stands for CAN in Automation. Signed-off-by: Roman Fietze Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 509d5e063d8c..2cfe5012e4e5 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -110,7 +110,7 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, long rate; u64 v64; - /* Use CIA recommended sample points */ + /* Use CiA recommended sample points */ if (bt->sample_point) { sampl_pt = bt->sample_point; } else { -- cgit v1.2.3 From efbd50d2f62fc1f69a3dcd153e63ba28cc8eb27f Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 11 Oct 2014 00:31:07 +0400 Subject: can: esd_usb2: fix memory leak on disconnect It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds the missing deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Matthias Fuchs Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/esd_usb2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index b7c9e8b11460..7a90075529c3 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -1143,6 +1143,7 @@ static void esd_usb2_disconnect(struct usb_interface *intf) } } unlink_all_urbs(dev); + kfree(dev); } } -- cgit v1.2.3 From 9c4b19a07dddda3ba35a2eb9b4134d485908e2f5 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 17 Nov 2014 23:17:02 +0800 Subject: spi: sirf: fix word width configuration commit 8c328a262f ("spi: sirf: Avoid duplicate code in various bits_per_word cases") is wrong in setting data width register of fifo is not right, it should use sspi->word_width >> 1 to set related bits. According to hardware spec, the mapping between register value and data width: 0 - byte 1 - WORD 2 - DWORD Fixes: 8c328a262f ("spi: sirf: Avoid duplicate code in various bits_per_word cases") is wrong in setting data width register of Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sirf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 39e2c0a55a28..f63de781c729 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -562,9 +562,9 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) sspi->word_width = DIV_ROUND_UP(bits_per_word, 8); txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - sspi->word_width; + (sspi->word_width >> 1); rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - sspi->word_width; + (sspi->word_width >> 1); if (!(spi->mode & SPI_CS_HIGH)) regval |= SIRFSOC_SPI_CS_IDLE_STAT; -- cgit v1.2.3 From 4e2061b1e1f6b8e698b36a6518b6f8c15edc4547 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 18 Nov 2014 19:17:06 +0530 Subject: can: remove unused variable these variable were only assigned some values, but then never reused again. so they are safe to be removed. Signed-off-by: Sudip Mukherjee Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/kvaser_pci.c | 5 +---- drivers/net/can/usb/ems_usb.c | 3 +-- drivers/net/can/usb/esd_usb2.c | 2 -- 3 files changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c index 8ff3424d5147..15c00faeec61 100644 --- a/drivers/net/can/sja1000/kvaser_pci.c +++ b/drivers/net/can/sja1000/kvaser_pci.c @@ -214,7 +214,7 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel, struct net_device *dev; struct sja1000_priv *priv; struct kvaser_pci *board; - int err, init_step; + int err; dev = alloc_sja1000dev(sizeof(struct kvaser_pci)); if (dev == NULL) @@ -235,7 +235,6 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel, if (channel == 0) { board->xilinx_ver = ioread8(board->res_addr + XILINX_VERINT) >> 4; - init_step = 2; /* Assert PTADR# - we're in passive mode so the other bits are not important */ @@ -264,8 +263,6 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel, priv->irq_flags = IRQF_SHARED; dev->irq = pdev->irq; - init_step = 4; - dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n", priv->reg_base, board->conf_addr, dev->irq); diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 00f2534dde73..29d3f0938eb8 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -434,10 +434,9 @@ static void ems_usb_read_bulk_callback(struct urb *urb) if (urb->actual_length > CPC_HEADER_SIZE) { struct ems_cpc_msg *msg; u8 *ibuf = urb->transfer_buffer; - u8 msg_count, again, start; + u8 msg_count, start; msg_count = ibuf[0] & ~0x80; - again = ibuf[0] & 0x80; start = CPC_HEADER_SIZE; diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index 7a90075529c3..c063a54ab8dd 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -464,7 +464,6 @@ static void esd_usb2_write_bulk_callback(struct urb *urb) { struct esd_tx_urb_context *context = urb->context; struct esd_usb2_net_priv *priv; - struct esd_usb2 *dev; struct net_device *netdev; size_t size = sizeof(struct esd_usb2_msg); @@ -472,7 +471,6 @@ static void esd_usb2_write_bulk_callback(struct urb *urb) priv = context->priv; netdev = priv->netdev; - dev = priv->usb2; /* free up our allocated buffer */ usb_free_coherent(urb->dev, size, -- cgit v1.2.3 From fb3ec7ba5a665c280f7299a36460449038fc1083 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 18 Nov 2014 19:17:07 +0530 Subject: can: xilinx_can: fix comparison of unsigned variable The variable err was of the type u32. It was being compared with < 0, and being an unsigned variable the comparison would have been always false. Moreover, err was getting the return value from set_reset_mode() and xcan_set_bittiming(), and both are returning int. Signed-off-by: Sudip Mukherjee Reviewed-by: Michal Simek Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 5e8b5609c067..47b2f801d127 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -300,7 +300,8 @@ static int xcan_set_bittiming(struct net_device *ndev) static int xcan_chip_start(struct net_device *ndev) { struct xcan_priv *priv = netdev_priv(ndev); - u32 err, reg_msr, reg_sr_mask; + u32 reg_msr, reg_sr_mask; + int err; unsigned long timeout; /* Check if it is in reset mode */ -- cgit v1.2.3 From 92593a035ee6a81f50b54ab34b23b1c1319ee413 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 18 Nov 2014 13:16:13 +0100 Subject: can: xilinx_can: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 47b2f801d127..8a998e3884ce 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -962,6 +962,7 @@ static const struct net_device_ops xcan_netdev_ops = { .ndo_open = xcan_open, .ndo_stop = xcan_close, .ndo_start_xmit = xcan_start_xmit, + .ndo_change_mtu = can_change_mtu, }; /** -- cgit v1.2.3 From ca976d6af4e50899f4e840e8017ec29d8fe6b50e Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 18 Nov 2014 13:16:13 +0100 Subject: can: rcar_can: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rcar_can.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/rcar_can.c b/drivers/net/can/rcar_can.c index 1abe133d1594..9718248e55f1 100644 --- a/drivers/net/can/rcar_can.c +++ b/drivers/net/can/rcar_can.c @@ -628,6 +628,7 @@ static const struct net_device_ops rcar_can_netdev_ops = { .ndo_open = rcar_can_open, .ndo_stop = rcar_can_close, .ndo_start_xmit = rcar_can_start_xmit, + .ndo_change_mtu = can_change_mtu, }; static void rcar_can_rx_pkt(struct rcar_can_priv *priv) -- cgit v1.2.3 From 27b3383a1432127bfcf9f8a63bf184ff4d866141 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 22 Oct 2014 11:49:01 +0200 Subject: of: Spelling s/stucture/structure/ Signed-off-by: Geert Uytterhoeven Cc: Grant Likely Cc: Rob Herring Signed-off-by: Rob Herring --- drivers/of/dynamic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index f297891d8529..d4994177dec2 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -247,7 +247,7 @@ void of_node_release(struct kobject *kobj) * @allocflags: Allocation flags (typically pass GFP_KERNEL) * * Copy a property by dynamically allocating the memory of both the - * property stucture and the property name & contents. The property's + * property structure and the property name & contents. The property's * flags have the OF_DYNAMIC bit set so that we can differentiate between * dynamically allocated properties and not. * Returns the newly allocated property or NULL on out of memory error. -- cgit v1.2.3 From ab74d00a39f70e1bc34a01322bb59f3750ca7a8c Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sun, 9 Nov 2014 00:55:47 -0800 Subject: of: Fix crash if an earlycon driver is not found __earlycon_of_table_sentinel.compatible is a char[128], not a pointer, so it will never be NULL. Checking it against NULL causes the match loop to run past the end of the array, and eventually match a bogus entry, under the following conditions: - Kernel command line specifies "earlycon" with no parameters - DT has a stdout-path pointing to a UART node - The UART driver doesn't use OF_EARLYCON_DECLARE (or maybe the console driver is compiled out) Fix this by checking to see if match->compatible is a non-empty string. Signed-off-by: Kevin Cernekee Cc: # 3.16+ Signed-off-by: Rob Herring --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index d1ffca8b34ea..30e97bcc4f88 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -773,7 +773,7 @@ int __init early_init_dt_scan_chosen_serial(void) if (offset < 0) return -ENODEV; - while (match->compatible) { + while (match->compatible[0]) { unsigned long addr; if (fdt_node_check_compatible(fdt, offset, match->compatible)) { match++; -- cgit v1.2.3 From 746c9e9f92dde2789908e51a354ba90a1962a2eb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 14 Nov 2014 17:55:03 +1100 Subject: of/base: Fix PowerPC address parsing hack We have a historical hack that treats missing ranges properties as the equivalent of an empty one. This is needed for ancient PowerMac "bad" device-trees, and shouldn't be enabled for any other PowerPC platform, otherwise we get some nasty layout of devices in sysfs or even duplication when a set of otherwise identically named devices is created multiple times under a different parent node with no ranges property. This fix is needed for the PowerNV i2c busses to be exposed properly and will fix a number of other embedded cases. Signed-off-by: Benjamin Herrenschmidt CC: Acked-by: Grant Likely Signed-off-by: Rob Herring --- drivers/of/address.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/of/address.c b/drivers/of/address.c index afdb78299f61..06af494184d6 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -450,6 +450,21 @@ static struct of_bus *of_match_bus(struct device_node *np) return NULL; } +static int of_empty_ranges_quirk(void) +{ + if (IS_ENABLED(CONFIG_PPC)) { + /* To save cycles, we cache the result */ + static int quirk_state = -1; + + if (quirk_state < 0) + quirk_state = + of_machine_is_compatible("Power Macintosh") || + of_machine_is_compatible("MacRISC"); + return quirk_state; + } + return false; +} + static int of_translate_one(struct device_node *parent, struct of_bus *bus, struct of_bus *pbus, __be32 *addr, int na, int ns, int pna, const char *rprop) @@ -475,12 +490,10 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, * This code is only enabled on powerpc. --gcl */ ranges = of_get_property(parent, rprop, &rlen); -#if !defined(CONFIG_PPC) - if (ranges == NULL) { + if (ranges == NULL && !of_empty_ranges_quirk()) { pr_err("OF: no ranges; cannot translate\n"); return 1; } -#endif /* !defined(CONFIG_PPC) */ if (ranges == NULL || rlen == 0) { offset = of_read_number(addr, na); memset(addr, 0, pna * 4); -- cgit v1.2.3 From 50212b425d0ef8b606b316826b56abbb48680758 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 18 Nov 2014 13:16:13 +0100 Subject: can: gs_usb: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/gs_usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 04b0f84612f0..009acc8641fc 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -718,6 +718,7 @@ static const struct net_device_ops gs_usb_netdev_ops = { .ndo_open = gs_can_open, .ndo_stop = gs_can_close, .ndo_start_xmit = gs_can_start_xmit, + .ndo_change_mtu = can_change_mtu, }; static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf) -- cgit v1.2.3 From d6fdb38b4f2c4090e176aa55fe73dd2f45cfa4a6 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 29 Oct 2014 18:45:23 +0800 Subject: can: m_can: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 10d571eaed85..e61886bf1bb3 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -992,6 +992,7 @@ static const struct net_device_ops m_can_netdev_ops = { .ndo_open = m_can_open, .ndo_stop = m_can_close, .ndo_start_xmit = m_can_start_xmit, + .ndo_change_mtu = can_change_mtu, }; static int register_m_can_dev(struct net_device *dev) -- cgit v1.2.3 From efe22286e05751e9913a8002fefdb45cdb7361ad Mon Sep 17 00:00:00 2001 From: David Cohen Date: Wed, 15 Oct 2014 14:41:50 -0700 Subject: can: m_can: add CONFIG_HAS_IOMEM dependence m_can uses io memory which makes it not compilable on architectures without HAS_IOMEM such as UML: drivers/built-in.o: In function `m_can_plat_probe': m_can.c:(.text+0x218cc5): undefined reference to `devm_ioremap_resource' m_can.c:(.text+0x218df9): undefined reference to `devm_ioremap' Signed-off-by: David Cohen Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig index fca5482c09ac..04f20dd39007 100644 --- a/drivers/net/can/m_can/Kconfig +++ b/drivers/net/can/m_can/Kconfig @@ -1,4 +1,5 @@ config CAN_M_CAN + depends on HAS_IOMEM tristate "Bosch M_CAN devices" ---help--- Say Y here if you want to support for Bosch M_CAN controller. -- cgit v1.2.3 From 962845da54afe2fc7ebf64c2d8bb5aa65a826b2f Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 7 Nov 2014 16:45:14 +0800 Subject: can: m_can: add missing message RAM initialization The M_CAN message RAM is usually equipped with a parity or ECC functionality. But RAM cells suffer a hardware reset and can therefore hold arbitrary content at startup - including parity and/or ECC bits. To prevent the M_CAN controller detecting checksum errors when reading potentially uninitialized TX message RAM content to transmit CAN frames the TX message RAM has to be written with (any kind of) initial data. Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index e61886bf1bb3..268ad5064c47 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1010,7 +1010,7 @@ static int m_can_of_parse_mram(struct platform_device *pdev, struct resource *res; void __iomem *addr; u32 out_val[MRAM_CFG_LEN]; - int ret; + int i, start, end, ret; /* message ram could be shared */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram"); @@ -1061,6 +1061,15 @@ static int m_can_of_parse_mram(struct platform_device *pdev, priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num, priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num); + /* initialize the entire Message RAM in use to avoid possible + * ECC/parity checksum errors when reading an uninitialized buffer + */ + start = priv->mcfg[MRAM_SIDF].off; + end = priv->mcfg[MRAM_TXB].off + + priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE; + for (i = start; i < end; i += 4) + writel(0x0, priv->mram_base + i); + return 0; } -- cgit v1.2.3 From f6a99649526370c7a88b86736c02f2a74b5b20e7 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 29 Oct 2014 18:45:21 +0800 Subject: can: m_can: fix possible sleep in napi poll The m_can_get_berr_counter function can sleep and it may be called in napi poll function. Rework it to fix the following warning. root@imx6qdlsolo:~# cangen can0 -f -L 12 -D 112233445566778899001122 [ 1846.017565] m_can 20e8000.can can0: entered error warning state [ 1846.023551] ------------[ cut here ]------------ [ 1846.028216] WARNING: CPU: 0 PID: 560 at kernel/locking/mutex.c:867 mutex_trylock+0x218/0x23c() [ 1846.036889] DEBUG_LOCKS_WARN_ON(in_interrupt()) [ 1846.041263] Modules linked in: [ 1846.044594] CPU: 0 PID: 560 Comm: cangen Not tainted 3.17.0-rc4-next-20140915-00010-g032d018-dirty #477 [ 1846.054033] Backtrace: [ 1846.056557] [<80012448>] (dump_backtrace) from [<80012728>] (show_stack+0x18/0x1c) [ 1846.064180] r6:809a07ec r5:809a07ec r4:00000000 r3:00000000 [ 1846.069966] [<80012710>] (show_stack) from [<806c9ee0>] (dump_stack+0x8c/0xa4) [ 1846.077264] [<806c9e54>] (dump_stack) from [<8002aa78>] (warn_slowpath_common+0x70/0x94) [ 1846.085403] r6:806cd1b0 r5:00000009 r4:be1d5c20 r3:be07b0c0 [ 1846.091204] [<8002aa08>] (warn_slowpath_common) from [<8002aad4>] (warn_slowpath_fmt+0x38/0x40) [ 1846.099951] r8:8119106c r7:80515aa4 r6:be027000 r5:00000001 r4:809d1df4 [ 1846.106830] [<8002aaa0>] (warn_slowpath_fmt) from [<806cd1b0>] (mutex_trylock+0x218/0x23c) [ 1846.115141] r3:80851c88 r2:8084fb74 [ 1846.118804] [<806ccf98>] (mutex_trylock) from [<80515aa4>] (clk_prepare_lock+0x14/0xf4) [ 1846.126859] r8:00000040 r7:be1d5cec r6:be027000 r5:be255800 r4:be027000 [ 1846.133737] [<80515a90>] (clk_prepare_lock) from [<80517660>] (clk_prepare+0x14/0x2c) [ 1846.141583] r5:be255800 r4:be027000 [ 1846.145272] [<8051764c>] (clk_prepare) from [<8041ff14>] (m_can_get_berr_counter+0x20/0xd4) [ 1846.153672] r4:be255800 r3:be07b0c0 [ 1846.157325] [<8041fef4>] (m_can_get_berr_counter) from [<80420428>] (m_can_poll+0x310/0x8fc) [ 1846.165809] r7:bd4dc540 r6:00000744 r5:11300000 r4:be255800 [ 1846.171590] [<80420118>] (m_can_poll) from [<8056a468>] (net_rx_action+0xcc/0x1b4) [ 1846.179204] r10:00000101 r9:be255ebc r8:00000040 r7:be7c3208 r6:8097c100 r5:be7c3200 [ 1846.187192] r4:0000012c [ 1846.189779] [<8056a39c>] (net_rx_action) from [<8002deec>] (__do_softirq+0xfc/0x2c4) [ 1846.197568] r10:00000101 r9:8097c088 r8:00000003 r7:8097c080 r6:40000001 r5:8097c08c [ 1846.205559] r4:00000020 [ 1846.208144] [<8002ddf0>] (__do_softirq) from [<8002e194>] (do_softirq+0x7c/0x88) [ 1846.215588] r10:00000000 r9:bd516a60 r8:be18ce00 r7:00000000 r6:be255800 r5:8056c0ec [ 1846.223578] r4:60000093 [ 1846.226163] [<8002e118>] (do_softirq) from [<8002e288>] (__local_bh_enable_ip+0xe8/0x10c) [ 1846.234386] r4:00000200 r3:be1d4000 [ 1846.238036] [<8002e1a0>] (__local_bh_enable_ip) from [<8056c108>] (__dev_queue_xmit+0x314/0x6b0) [ 1846.246868] r6:be255800 r5:bd516a00 r4:00000000 r3:be07b0c0 [ 1846.252645] [<8056bdf4>] (__dev_queue_xmit) from [<8056c4b8>] (dev_queue_xmit+0x14/0x18) Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 268ad5064c47..214160b4c314 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -481,11 +481,23 @@ static int m_can_handle_lec_err(struct net_device *dev, return 1; } +static int __m_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + struct m_can_priv *priv = netdev_priv(dev); + unsigned int ecr; + + ecr = m_can_read(priv, M_CAN_ECR); + bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT; + bec->txerr = ecr & ECR_TEC_MASK; + + return 0; +} + static int m_can_get_berr_counter(const struct net_device *dev, struct can_berr_counter *bec) { struct m_can_priv *priv = netdev_priv(dev); - unsigned int ecr; int err; err = clk_prepare_enable(priv->hclk); @@ -498,9 +510,7 @@ static int m_can_get_berr_counter(const struct net_device *dev, return err; } - ecr = m_can_read(priv, M_CAN_ECR); - bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT; - bec->txerr = ecr & ECR_TEC_MASK; + __m_can_get_berr_counter(dev, bec); clk_disable_unprepare(priv->cclk); clk_disable_unprepare(priv->hclk); @@ -544,7 +554,7 @@ static int m_can_handle_state_change(struct net_device *dev, if (unlikely(!skb)) return 0; - m_can_get_berr_counter(dev, &bec); + __m_can_get_berr_counter(dev, &bec); switch (new_state) { case CAN_STATE_ERROR_ACTIVE: -- cgit v1.2.3 From 921f168109d029e3b59459c3a2754f0e2a70fad3 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 18 Nov 2014 19:00:54 +0800 Subject: can: m_can: fix not set can_dlc for remote frame The original code missed to set the cf->can_dlc in the RTR case, so add it. Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 214160b4c314..98f7e0ea7f6a 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -330,7 +330,7 @@ static void m_can_read_fifo(const struct net_device *dev, struct can_frame *cf, u32 rxfs) { struct m_can_priv *priv = netdev_priv(dev); - u32 id, fgi; + u32 id, fgi, dlc; /* calculate the fifo get index for where to read data */ fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_OFF; @@ -340,11 +340,12 @@ static void m_can_read_fifo(const struct net_device *dev, struct can_frame *cf, else cf->can_id = (id >> 18) & CAN_SFF_MASK; + dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC); + cf->can_dlc = get_can_dlc((dlc >> 16) & 0x0F); + if (id & RX_BUF_RTR) { cf->can_id |= CAN_RTR_FLAG; } else { - id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC); - cf->can_dlc = get_can_dlc((id >> 16) & 0x0F); *(u32 *)(cf->data + 0) = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DATA(0)); *(u32 *)(cf->data + 4) = m_can_fifo_read(priv, fgi, -- cgit v1.2.3 From 7660f633070986ab4ee41c063a90e140d5781e13 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 29 Oct 2014 18:45:24 +0800 Subject: can: m_can: add missing delay after setting CCCR_INIT bit The spec mentions there may be a delay until the value written to INIT can be read back due to the synchronization mechanism between the two clock domains. But it does not indicate the exact clock cycles needed. The 5us delay is a test value and seems ok. Without the delay, CCCR.CCE bit may fail to be set and then the initialization fail sometimes when do repeatly up and down. Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 98f7e0ea7f6a..3ad7d88720b7 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -296,6 +296,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv, if (enable) { /* enable m_can configuration */ m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT); + udelay(5); /* CCCR.CCE can only be set/reset while CCCR.INIT = '1' */ m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT | CCCR_CCE); } else { -- cgit v1.2.3 From a93f5cae67b366e4ce7e9eb336e2885309fd6612 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 29 Oct 2014 18:45:22 +0800 Subject: can: m_can: fix incorrect error messages Fix a few error messages. Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 3ad7d88720b7..2f61676b3a97 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -608,14 +608,14 @@ static int m_can_handle_state_errors(struct net_device *dev, u32 psr) if ((psr & PSR_EP) && (priv->can.state != CAN_STATE_ERROR_PASSIVE)) { - netdev_dbg(dev, "entered error warning state\n"); + netdev_dbg(dev, "entered error passive state\n"); work_done += m_can_handle_state_change(dev, CAN_STATE_ERROR_PASSIVE); } if ((psr & PSR_BO) && (priv->can.state != CAN_STATE_BUS_OFF)) { - netdev_dbg(dev, "entered error warning state\n"); + netdev_dbg(dev, "entered error bus off state\n"); work_done += m_can_handle_state_change(dev, CAN_STATE_BUS_OFF); } @@ -627,7 +627,7 @@ static void m_can_handle_other_err(struct net_device *dev, u32 irqstatus) { if (irqstatus & IR_WDI) netdev_err(dev, "Message RAM Watchdog event due to missing READY\n"); - if (irqstatus & IR_BEU) + if (irqstatus & IR_ELO) netdev_err(dev, "Error Logging Overflow\n"); if (irqstatus & IR_BEU) netdev_err(dev, "Bit Error Uncorrected\n"); -- cgit v1.2.3 From 80646733f11c2e9de3b6339f7e635047e6087280 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 18 Nov 2014 19:00:55 +0800 Subject: can: m_can: update to support CAN FD features Bosch M_CAN is CAN FD capable device. This patch implements the CAN FD features include up to 64 bytes payload and bitrate switch function. 1) Change the Rx FIFO and Tx Buffer to 64 bytes for support CAN FD up to 64 bytes payload. It's backward compatible with old 8 bytes normal CAN frame. 2) Allocate can frame or canfd frame based on EDL bit 3) Bitrate Switch function is disabled by default and will be enabled according to CANFD_BRS bit in cf->flags. Acked-by: Oliver Hartkopp Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 177 ++++++++++++++++++++++++++++++++---------- 1 file changed, 134 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 2f61676b3a97..d7bc462aafdc 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -105,14 +105,36 @@ enum m_can_mram_cfg { MRAM_CFG_NUM, }; +/* Fast Bit Timing & Prescaler Register (FBTP) */ +#define FBTR_FBRP_MASK 0x1f +#define FBTR_FBRP_SHIFT 16 +#define FBTR_FTSEG1_SHIFT 8 +#define FBTR_FTSEG1_MASK (0xf << FBTR_FTSEG1_SHIFT) +#define FBTR_FTSEG2_SHIFT 4 +#define FBTR_FTSEG2_MASK (0x7 << FBTR_FTSEG2_SHIFT) +#define FBTR_FSJW_SHIFT 0 +#define FBTR_FSJW_MASK 0x3 + /* Test Register (TEST) */ #define TEST_LBCK BIT(4) /* CC Control Register(CCCR) */ -#define CCCR_TEST BIT(7) -#define CCCR_MON BIT(5) -#define CCCR_CCE BIT(1) -#define CCCR_INIT BIT(0) +#define CCCR_TEST BIT(7) +#define CCCR_CMR_MASK 0x3 +#define CCCR_CMR_SHIFT 10 +#define CCCR_CMR_CANFD 0x1 +#define CCCR_CMR_CANFD_BRS 0x2 +#define CCCR_CMR_CAN 0x3 +#define CCCR_CME_MASK 0x3 +#define CCCR_CME_SHIFT 8 +#define CCCR_CME_CAN 0 +#define CCCR_CME_CANFD 0x1 +#define CCCR_CME_CANFD_BRS 0x2 +#define CCCR_TEST BIT(7) +#define CCCR_MON BIT(5) +#define CCCR_CCE BIT(1) +#define CCCR_INIT BIT(0) +#define CCCR_CANFD 0x10 /* Bit Timing & Prescaler Register (BTP) */ #define BTR_BRP_MASK 0x3ff @@ -204,6 +226,7 @@ enum m_can_mram_cfg { /* Rx Buffer / FIFO Element Size Configuration (RXESC) */ #define M_CAN_RXESC_8BYTES 0x0 +#define M_CAN_RXESC_64BYTES 0x777 /* Tx Buffer Configuration(TXBC) */ #define TXBC_NDTB_OFF 16 @@ -211,6 +234,7 @@ enum m_can_mram_cfg { /* Tx Buffer Element Size Configuration(TXESC) */ #define TXESC_TBDS_8BYTES 0x0 +#define TXESC_TBDS_64BYTES 0x7 /* Tx Event FIFO Con.guration (TXEFC) */ #define TXEFC_EFS_OFF 16 @@ -219,11 +243,11 @@ enum m_can_mram_cfg { /* Message RAM Configuration (in bytes) */ #define SIDF_ELEMENT_SIZE 4 #define XIDF_ELEMENT_SIZE 8 -#define RXF0_ELEMENT_SIZE 16 -#define RXF1_ELEMENT_SIZE 16 +#define RXF0_ELEMENT_SIZE 72 +#define RXF1_ELEMENT_SIZE 72 #define RXB_ELEMENT_SIZE 16 #define TXE_ELEMENT_SIZE 8 -#define TXB_ELEMENT_SIZE 16 +#define TXB_ELEMENT_SIZE 72 /* Message RAM Elements */ #define M_CAN_FIFO_ID 0x0 @@ -231,11 +255,17 @@ enum m_can_mram_cfg { #define M_CAN_FIFO_DATA(n) (0x8 + ((n) << 2)) /* Rx Buffer Element */ +/* R0 */ #define RX_BUF_ESI BIT(31) #define RX_BUF_XTD BIT(30) #define RX_BUF_RTR BIT(29) +/* R1 */ +#define RX_BUF_ANMF BIT(31) +#define RX_BUF_EDL BIT(21) +#define RX_BUF_BRS BIT(20) /* Tx Buffer Element */ +/* R0 */ #define TX_BUF_XTD BIT(30) #define TX_BUF_RTR BIT(29) @@ -327,42 +357,67 @@ static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv) m_can_write(priv, M_CAN_ILE, 0x0); } -static void m_can_read_fifo(const struct net_device *dev, struct can_frame *cf, - u32 rxfs) +static void m_can_read_fifo(struct net_device *dev, u32 rxfs) { + struct net_device_stats *stats = &dev->stats; struct m_can_priv *priv = netdev_priv(dev); + struct canfd_frame *cf; + struct sk_buff *skb; u32 id, fgi, dlc; + int i; /* calculate the fifo get index for where to read data */ fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_OFF; + dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC); + if (dlc & RX_BUF_EDL) + skb = alloc_canfd_skb(dev, &cf); + else + skb = alloc_can_skb(dev, (struct can_frame **)&cf); + if (!skb) { + stats->rx_dropped++; + return; + } + + if (dlc & RX_BUF_EDL) + cf->len = can_dlc2len((dlc >> 16) & 0x0F); + else + cf->len = get_can_dlc((dlc >> 16) & 0x0F); + id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_ID); if (id & RX_BUF_XTD) cf->can_id = (id & CAN_EFF_MASK) | CAN_EFF_FLAG; else cf->can_id = (id >> 18) & CAN_SFF_MASK; - dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC); - cf->can_dlc = get_can_dlc((dlc >> 16) & 0x0F); + if (id & RX_BUF_ESI) { + cf->flags |= CANFD_ESI; + netdev_dbg(dev, "ESI Error\n"); + } - if (id & RX_BUF_RTR) { + if (!(dlc & RX_BUF_EDL) && (id & RX_BUF_RTR)) { cf->can_id |= CAN_RTR_FLAG; } else { - *(u32 *)(cf->data + 0) = m_can_fifo_read(priv, fgi, - M_CAN_FIFO_DATA(0)); - *(u32 *)(cf->data + 4) = m_can_fifo_read(priv, fgi, - M_CAN_FIFO_DATA(1)); + if (dlc & RX_BUF_BRS) + cf->flags |= CANFD_BRS; + + for (i = 0; i < cf->len; i += 4) + *(u32 *)(cf->data + i) = + m_can_fifo_read(priv, fgi, + M_CAN_FIFO_DATA(i / 4)); } /* acknowledge rx fifo 0 */ m_can_write(priv, M_CAN_RXF0A, fgi); + + stats->rx_packets++; + stats->rx_bytes += cf->len; + + netif_receive_skb(skb); } static int m_can_do_rx_poll(struct net_device *dev, int quota) { struct m_can_priv *priv = netdev_priv(dev); - struct net_device_stats *stats = &dev->stats; - struct sk_buff *skb; - struct can_frame *frame; u32 pkts = 0; u32 rxfs; @@ -376,18 +431,7 @@ static int m_can_do_rx_poll(struct net_device *dev, int quota) if (rxfs & RXFS_RFL) netdev_warn(dev, "Rx FIFO 0 Message Lost\n"); - skb = alloc_can_skb(dev, &frame); - if (!skb) { - stats->rx_dropped++; - return pkts; - } - - m_can_read_fifo(dev, frame, rxfs); - - stats->rx_packets++; - stats->rx_bytes += frame->can_dlc; - - netif_receive_skb(skb); + m_can_read_fifo(dev, rxfs); quota--; pkts++; @@ -745,10 +789,23 @@ static const struct can_bittiming_const m_can_bittiming_const = { .brp_inc = 1, }; +static const struct can_bittiming_const m_can_data_bittiming_const = { + .name = KBUILD_MODNAME, + .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */ + .tseg1_max = 16, + .tseg2_min = 1, /* Time segment 2 = phase_seg2 */ + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 32, + .brp_inc = 1, +}; + static int m_can_set_bittiming(struct net_device *dev) { struct m_can_priv *priv = netdev_priv(dev); const struct can_bittiming *bt = &priv->can.bittiming; + const struct can_bittiming *dbt = &priv->can.data_bittiming; u16 brp, sjw, tseg1, tseg2; u32 reg_btp; @@ -759,7 +816,17 @@ static int m_can_set_bittiming(struct net_device *dev) reg_btp = (brp << BTR_BRP_SHIFT) | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) | (tseg2 << BTR_TSEG2_SHIFT); m_can_write(priv, M_CAN_BTP, reg_btp); - netdev_dbg(dev, "setting BTP 0x%x\n", reg_btp); + + if (priv->can.ctrlmode & CAN_CTRLMODE_FD) { + brp = dbt->brp - 1; + sjw = dbt->sjw - 1; + tseg1 = dbt->prop_seg + dbt->phase_seg1 - 1; + tseg2 = dbt->phase_seg2 - 1; + reg_btp = (brp << FBTR_FBRP_SHIFT) | (sjw << FBTR_FSJW_SHIFT) | + (tseg1 << FBTR_FTSEG1_SHIFT) | + (tseg2 << FBTR_FTSEG2_SHIFT); + m_can_write(priv, M_CAN_FBTP, reg_btp); + } return 0; } @@ -779,8 +846,8 @@ static void m_can_chip_config(struct net_device *dev) m_can_config_endisable(priv, true); - /* RX Buffer/FIFO Element Size 8 bytes data field */ - m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_8BYTES); + /* RX Buffer/FIFO Element Size 64 bytes data field */ + m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_64BYTES); /* Accept Non-matching Frames Into FIFO 0 */ m_can_write(priv, M_CAN_GFC, 0x0); @@ -789,8 +856,8 @@ static void m_can_chip_config(struct net_device *dev) m_can_write(priv, M_CAN_TXBC, (1 << TXBC_NDTB_OFF) | priv->mcfg[MRAM_TXB].off); - /* only support 8 bytes firstly */ - m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_8BYTES); + /* support 64 bytes payload */ + m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_64BYTES); m_can_write(priv, M_CAN_TXEFC, (1 << TXEFC_EFS_OFF) | priv->mcfg[MRAM_TXE].off); @@ -805,7 +872,8 @@ static void m_can_chip_config(struct net_device *dev) RXFC_FWM_1 | priv->mcfg[MRAM_RXF1].off); cccr = m_can_read(priv, M_CAN_CCCR); - cccr &= ~(CCCR_TEST | CCCR_MON); + cccr &= ~(CCCR_TEST | CCCR_MON | (CCCR_CMR_MASK << CCCR_CMR_SHIFT) | + (CCCR_CME_MASK << CCCR_CME_SHIFT)); test = m_can_read(priv, M_CAN_TEST); test &= ~TEST_LBCK; @@ -817,6 +885,9 @@ static void m_can_chip_config(struct net_device *dev) test |= TEST_LBCK; } + if (priv->can.ctrlmode & CAN_CTRLMODE_FD) + cccr |= CCCR_CME_CANFD_BRS << CCCR_CME_SHIFT; + m_can_write(priv, M_CAN_CCCR, cccr); m_can_write(priv, M_CAN_TEST, test); @@ -881,11 +952,13 @@ static struct net_device *alloc_m_can_dev(void) priv->dev = dev; priv->can.bittiming_const = &m_can_bittiming_const; + priv->can.data_bittiming_const = &m_can_data_bittiming_const; priv->can.do_set_mode = m_can_set_mode; priv->can.do_get_berr_counter = m_can_get_berr_counter; priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY | - CAN_CTRLMODE_BERR_REPORTING; + CAN_CTRLMODE_BERR_REPORTING | + CAN_CTRLMODE_FD; return dev; } @@ -968,8 +1041,9 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct m_can_priv *priv = netdev_priv(dev); - struct can_frame *cf = (struct can_frame *)skb->data; - u32 id; + struct canfd_frame *cf = (struct canfd_frame *)skb->data; + u32 id, cccr; + int i; if (can_dropped_invalid_skb(dev, skb)) return NETDEV_TX_OK; @@ -988,11 +1062,28 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb, /* message ram configuration */ m_can_fifo_write(priv, 0, M_CAN_FIFO_ID, id); - m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC, cf->can_dlc << 16); - m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(0), *(u32 *)(cf->data + 0)); - m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(1), *(u32 *)(cf->data + 4)); + m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC, can_len2dlc(cf->len) << 16); + + for (i = 0; i < cf->len; i += 4) + m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(i / 4), + *(u32 *)(cf->data + i)); + can_put_echo_skb(skb, dev, 0); + if (priv->can.ctrlmode & CAN_CTRLMODE_FD) { + cccr = m_can_read(priv, M_CAN_CCCR); + cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT); + if (can_is_canfd_skb(skb)) { + if (cf->flags & CANFD_BRS) + cccr |= CCCR_CMR_CANFD_BRS << CCCR_CMR_SHIFT; + else + cccr |= CCCR_CMR_CANFD << CCCR_CMR_SHIFT; + } else { + cccr |= CCCR_CMR_CAN << CCCR_CMR_SHIFT; + } + m_can_write(priv, M_CAN_CCCR, cccr); + } + /* enable first TX buffer to start transfer */ m_can_write(priv, M_CAN_TXBTIE, 0x1); m_can_write(priv, M_CAN_TXBAR, 0x1); -- cgit v1.2.3 From 11bf7828a59880427403e13dcff8228d67e9e0f7 Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Mon, 17 Nov 2014 16:24:54 -0800 Subject: vxlan: Inline vxlan_gso_check(). Suggested-by: Or Gerlitz Signed-off-by: Joe Stringer Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 19 ------------------- include/net/vxlan.h | 18 +++++++++++++++++- 2 files changed, 17 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 6b658638b456..e1e335c339e3 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -67,12 +67,6 @@ #define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */ -/* VXLAN protocol header */ -struct vxlanhdr { - __be32 vx_flags; - __be32 vx_vni; -}; - /* UDP port for VXLAN traffic. * The IANA assigned port is 4789, but the Linux default is 8472 * for compatibility with early adopters. @@ -1571,19 +1565,6 @@ static bool route_shortcircuit(struct net_device *dev, struct sk_buff *skb) return false; } -bool vxlan_gso_check(struct sk_buff *skb) -{ - if ((skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) && - (skb->inner_protocol_type != ENCAP_TYPE_ETHER || - skb->inner_protocol != htons(ETH_P_TEB) || - (skb_inner_mac_header(skb) - skb_transport_header(skb) != - sizeof(struct udphdr) + sizeof(struct vxlanhdr)))) - return false; - - return true; -} -EXPORT_SYMBOL_GPL(vxlan_gso_check); - #if IS_ENABLED(CONFIG_IPV6) static int vxlan6_xmit_skb(struct vxlan_sock *vs, struct dst_entry *dst, struct sk_buff *skb, diff --git a/include/net/vxlan.h b/include/net/vxlan.h index afadf8e53f20..57cccd0052e5 100644 --- a/include/net/vxlan.h +++ b/include/net/vxlan.h @@ -8,6 +8,12 @@ #define VNI_HASH_BITS 10 #define VNI_HASH_SIZE (1<gso_type & SKB_GSO_UDP_TUNNEL) && + (skb->inner_protocol_type != ENCAP_TYPE_ETHER || + skb->inner_protocol != htons(ETH_P_TEB) || + (skb_inner_mac_header(skb) - skb_transport_header(skb) != + sizeof(struct udphdr) + sizeof(struct vxlanhdr)))) + return false; + + return true; +} /* IP header + UDP + VXLAN + Ethernet header */ #define VXLAN_HEADROOM (20 + 8 + 8 + 14) -- cgit v1.2.3 From 204ec6e07ea7aff863df0f7c53301f9cbbfbb9d3 Mon Sep 17 00:00:00 2001 From: Troy Clark Date: Mon, 17 Nov 2014 14:33:17 -0800 Subject: usb: serial: ftdi_sio: add PIDs for Matrix Orbital products Add PIDs for new Matrix Orbital GTT series products. Signed-off-by: Troy Clark Cc: stable [johan: shorten commit message ] Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 33 +++++++++++++++++++++++++++++++++ drivers/usb/serial/ftdi_sio_ids.h | 39 +++++++++++++++++++++++++++++++++++---- 2 files changed, 68 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0dad8ce5a609..1ebb351b9e9a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -470,6 +470,39 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 6786b705ccf6..e52409c9be99 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -926,8 +926,8 @@ #define BAYER_CONTOUR_CABLE_PID 0x6001 /* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. + * Matrix Orbital Intelligent USB displays. + * http://www.matrixorbital.com */ #define MTXORB_VID 0x1B3D #define MTXORB_FTDI_RANGE_0100_PID 0x0100 @@ -1186,8 +1186,39 @@ #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - +#define MTXORB_FTDI_RANGE_4701_PID 0x4701 +#define MTXORB_FTDI_RANGE_9300_PID 0x9300 +#define MTXORB_FTDI_RANGE_9301_PID 0x9301 +#define MTXORB_FTDI_RANGE_9302_PID 0x9302 +#define MTXORB_FTDI_RANGE_9303_PID 0x9303 +#define MTXORB_FTDI_RANGE_9304_PID 0x9304 +#define MTXORB_FTDI_RANGE_9305_PID 0x9305 +#define MTXORB_FTDI_RANGE_9306_PID 0x9306 +#define MTXORB_FTDI_RANGE_9307_PID 0x9307 +#define MTXORB_FTDI_RANGE_9308_PID 0x9308 +#define MTXORB_FTDI_RANGE_9309_PID 0x9309 +#define MTXORB_FTDI_RANGE_930A_PID 0x930A +#define MTXORB_FTDI_RANGE_930B_PID 0x930B +#define MTXORB_FTDI_RANGE_930C_PID 0x930C +#define MTXORB_FTDI_RANGE_930D_PID 0x930D +#define MTXORB_FTDI_RANGE_930E_PID 0x930E +#define MTXORB_FTDI_RANGE_930F_PID 0x930F +#define MTXORB_FTDI_RANGE_9310_PID 0x9310 +#define MTXORB_FTDI_RANGE_9311_PID 0x9311 +#define MTXORB_FTDI_RANGE_9312_PID 0x9312 +#define MTXORB_FTDI_RANGE_9313_PID 0x9313 +#define MTXORB_FTDI_RANGE_9314_PID 0x9314 +#define MTXORB_FTDI_RANGE_9315_PID 0x9315 +#define MTXORB_FTDI_RANGE_9316_PID 0x9316 +#define MTXORB_FTDI_RANGE_9317_PID 0x9317 +#define MTXORB_FTDI_RANGE_9318_PID 0x9318 +#define MTXORB_FTDI_RANGE_9319_PID 0x9319 +#define MTXORB_FTDI_RANGE_931A_PID 0x931A +#define MTXORB_FTDI_RANGE_931B_PID 0x931B +#define MTXORB_FTDI_RANGE_931C_PID 0x931C +#define MTXORB_FTDI_RANGE_931D_PID 0x931D +#define MTXORB_FTDI_RANGE_931E_PID 0x931E +#define MTXORB_FTDI_RANGE_931F_PID 0x931F /* * The Mobility Lab (TML) -- cgit v1.2.3 From 6bab4a8a1888729f17f4923cc5867e4674f66333 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 18 Nov 2014 23:59:33 +0100 Subject: clockevent: sun4i: Fix race condition in the probe code The interrupts were activated and the handler registered before the clockevent was registered in the probe function. The interrupt handler, however, was making the assumption that the clockevent device was registered. That could cause a null pointer dereference if the timer interrupt was firing during this narrow window. Fix that by moving the clockevent registration before the interrupt is enabled. Reported-by: Roman Byshko Signed-off-by: Maxime Ripard Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano --- drivers/clocksource/sun4i_timer.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index efb17c3ee120..f4a9c0058b4d 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -182,6 +182,12 @@ static void __init sun4i_timer_init(struct device_node *node) /* Make sure timer is stopped before playing with interrupts */ sun4i_clkevt_time_stop(0); + sun4i_clockevent.cpumask = cpu_possible_mask; + sun4i_clockevent.irq = irq; + + clockevents_config_and_register(&sun4i_clockevent, rate, + TIMER_SYNC_TICKS, 0xffffffff); + ret = setup_irq(irq, &sun4i_timer_irq); if (ret) pr_warn("failed to setup irq %d\n", irq); @@ -189,12 +195,6 @@ static void __init sun4i_timer_init(struct device_node *node) /* Enable timer0 interrupt */ val = readl(timer_base + TIMER_IRQ_EN_REG); writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); - - sun4i_clockevent.cpumask = cpu_possible_mask; - sun4i_clockevent.irq = irq; - - clockevents_config_and_register(&sun4i_clockevent, rate, - TIMER_SYNC_TICKS, 0xffffffff); } CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer", sun4i_timer_init); -- cgit v1.2.3 From 5d1678a33c731b56e245e888fdae5e88efce0997 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 18 Nov 2014 11:25:19 +0100 Subject: USB: keyspan: fix tty line-status reporting Fix handling of TTY error flags, which are not bitmasks and must specifically not be ORed together as this prevents the line discipline from recognising them. Also insert null characters when reporting overrun errors as these are not associated with the received character. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan.c | 76 ++++++++++++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 93cb7cebda62..7799d8bc4a63 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -321,14 +321,19 @@ static void usa26_indat_callback(struct urb *urb) /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); } @@ -649,14 +654,19 @@ static void usa49_indat_callback(struct urb *urb) } else { /* some bytes had errors, every byte has status */ for (i = 0; i + 1 < urb->actual_length; i += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); } @@ -713,15 +723,19 @@ static void usa49wg_indat_callback(struct urb *urb) */ for (x = 0; x + 1 < len && i + 1 < urb->actual_length; x += 2) { - int stat = data[i], flag = 0; + int stat = data[i]; + int flag = TTY_NORMAL; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); i += 2; @@ -784,14 +798,20 @@ static void usa90_indat_callback(struct urb *urb) /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char( + &port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); } -- cgit v1.2.3 From 855515a6d3731242d85850a206f2ec084c917338 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 18 Nov 2014 11:25:20 +0100 Subject: USB: keyspan: fix overrun-error reporting Fix reporting of overrun errors, which are not associated with a character. Instead insert a null character and report only once. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7799d8bc4a63..077c714f1285 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -311,12 +311,13 @@ static void usa26_indat_callback(struct urb *urb) if ((data[0] & 0x80) == 0) { /* no errors on individual bytes, only possible overrun err */ - if (data[0] & RXERROR_OVERRUN) - err = TTY_OVERRUN; - else - err = 0; + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(&port->port, data[i], err); + tty_insert_flip_char(&port->port, data[i], + TTY_NORMAL); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); @@ -787,13 +788,13 @@ static void usa90_indat_callback(struct urb *urb) if ((data[0] & 0x80) == 0) { /* no errors on individual bytes, only possible overrun err*/ - if (data[0] & RXERROR_OVERRUN) - err = TTY_OVERRUN; - else - err = 0; + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } for (i = 1; i < urb->actual_length ; ++i) tty_insert_flip_char(&port->port, - data[i], err); + data[i], TTY_NORMAL); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); -- cgit v1.2.3 From 75bcbf29c284dd0154c3e895a0bd1ef0e796160e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 18 Nov 2014 11:25:21 +0100 Subject: USB: ssu100: fix overrun-error reporting Fix reporting of overrun errors, which should only be reported once using the inserted null character. Fixes: 6b8f1ca5581b ("USB: ssu100: set tty_flags in ssu100_process_packet") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ssu100.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index a7fe664b6b7d..70a098de429f 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -490,10 +490,9 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_FRAME; } - if (lsr & UART_LSR_OE){ + if (lsr & UART_LSR_OE) { port->icount.overrun++; - if (*tty_flag == TTY_NORMAL) - *tty_flag = TTY_OVERRUN; + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } @@ -511,12 +510,8 @@ static void ssu100_process_read_urb(struct urb *urb) if ((len >= 4) && (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { - if (packet[2] == 0x00) { + if (packet[2] == 0x00) ssu100_update_lsr(port, packet[3], &flag); - if (flag == TTY_OVERRUN) - tty_insert_flip_char(&port->port, 0, - TTY_OVERRUN); - } if (packet[2] == 0x01) ssu100_update_msr(port, packet[3]); -- cgit v1.2.3 From c1a2086e2d8c4eb4e8630ba752e911ec180dec67 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 19 Nov 2014 16:22:32 +0000 Subject: of/selftest: Fix off-by-one error in removal path The removal path for selftest data has an off by one error that causes the code to dereference beyond the end of the nodes[] array on the first pass through. The old code only worked by chance on a lot of platforms, but the bug was recently exposed on aarch64. The fix is simple. Decrement the node count before dereferencing, not after. Reported-by: Kevin Hilman Cc: Rob Herring Cc: Gaurav Minocha Cc: # v3.17+ --- drivers/of/selftest.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c index 11b873c54a77..e6c14dc400e9 100644 --- a/drivers/of/selftest.c +++ b/drivers/of/selftest.c @@ -896,7 +896,7 @@ static void selftest_data_remove(void) return; } - while (last_node_index >= 0) { + while (last_node_index-- > 0) { if (nodes[last_node_index]) { np = of_find_node_by_path(nodes[last_node_index]->full_name); if (strcmp(np->full_name, "/aliases") != 0) { @@ -908,7 +908,6 @@ static void selftest_data_remove(void) } } } - last_node_index--; } } -- cgit v1.2.3 From b8e4500f42fe4464a33a887579147050bed8fcef Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Tue, 18 Nov 2014 15:14:44 +0100 Subject: bonding: fix curr_active_slave/carrier with loadbalance arp monitoring Since commit 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") we can have a stale bond carrier state and stale curr_active_slave when using arp monitoring in loadbalance modes. The reason is that in bond_loadbalance_arp_mon() we can't have do_failover == true but slave_state_changed == false, whenever do_failover is true then slave_state_changed is also true. Then the following piece from bond_loadbalance_arp_mon(): if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) bond_update_slave_arr(bond, NULL); } else if (do_failover) { block_netpoll_tx(); bond_select_active_slave(bond); unblock_netpoll_tx(); } will execute only the first branch, always and regardless of do_failover. Since these two events aren't related in such way, we need to decouple and consider them separately. For example this issue could lead to the following result: Bonding Mode: load balancing (round-robin) *MII Status: down* MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 100 ARP IP target/s (n.n.n.n form): 192.168.9.2 Slave Interface: ens12 *MII Status: up* Speed: 10000 Mbps Duplex: full Link Failure Count: 2 Permanent HW addr: 00:0f:53:01:42:2c Slave queue ID: 0 Slave Interface: eth1 *MII Status: up* Speed: Unknown Duplex: Unknown Link Failure Count: 70 Permanent HW addr: 52:54:00:2f:0f:8e Slave queue ID: 0 Since some interfaces are up, then the status of the bond should also be up, but it will never change unless something invokes bond_set_carrier() (i.e. enslave, bond_select_active_slave etc). Now, if I force the calling of bond_select_active_slave via for example changing primary_reselect (it can change in any mode), then the MII status goes to "up" because it calls bond_select_active_slave() which should've been done from bond_loadbalance_arp_mon() itself. CC: Veaceslav Falico CC: Jay Vosburgh CC: Andy Gospodarek CC: Ding Tianhong Fixes: 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") Signed-off-by: Nikolay Aleksandrov Acked-by: Veaceslav Falico Acked-by: Andy Gospodarek Acked-by: Ding Tianhong Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c9ac06cfe6b7..a5115fb7cf33 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2471,7 +2471,8 @@ static void bond_loadbalance_arp_mon(struct work_struct *work) bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) bond_update_slave_arr(bond, NULL); - } else if (do_failover) { + } + if (do_failover) { block_netpoll_tx(); bond_select_active_slave(bond); unblock_netpoll_tx(); -- cgit v1.2.3 From 9737c6ab7afbc950e997ef80cba2c40dbbd16ea4 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 18 Nov 2014 17:51:27 +0200 Subject: net/mlx4_en: Add VXLAN ndo calls to the PF net device ops too This is currently missing, which results in a crash when one attempts to set VXLAN tunnel over the mlx4_en when acting as PF. [ 2408.785472] BUG: unable to handle kernel NULL pointer dereference at (null) [...] [ 2408.994104] Call Trace: [ 2408.996584] [] ? vxlan_get_rx_port+0xd6/0x103 [vxlan] [ 2409.003316] [] ? vxlan_lowerdev_event+0xf2/0xf2 [vxlan] [ 2409.010225] [] mlx4_en_start_port+0x862/0x96a [mlx4_en] [ 2409.017132] [] mlx4_en_open+0x17f/0x1b8 [mlx4_en] While here, make sure to invoke vxlan_get_rx_port() only when VXLAN offloads are actually enabled and not when they are only supported. Reported-by: Ido Shamay Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index c5fcc56ec06b..4d69e382b4e5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1693,7 +1693,7 @@ int mlx4_en_start_port(struct net_device *dev) mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap); #ifdef CONFIG_MLX4_EN_VXLAN - if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS) + if (priv->mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) vxlan_get_rx_port(dev); #endif priv->port_up = true; @@ -2422,6 +2422,11 @@ static const struct net_device_ops mlx4_netdev_ops_master = { .ndo_rx_flow_steer = mlx4_en_filter_rfs, #endif .ndo_get_phys_port_id = mlx4_en_get_phys_port_id, +#ifdef CONFIG_MLX4_EN_VXLAN + .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, + .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, + .ndo_gso_check = mlx4_en_gso_check, +#endif }; int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, -- cgit v1.2.3 From 7fc986d8a9727e5d40da3c2c1c343da6142e82a9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 19 Nov 2014 14:30:32 -0700 Subject: PCI: Support 64-bit bridge windows if we have 64-bit dma_addr_t Aaron reported that a 32-bit x86 kernel with Physical Address Extension (PAE) support complains about bridge prefetchable memory windows above 4GB: pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff] ... pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref] pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref] pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref] pci 0000:00:02.2: PCI bridge to [bus 03-04] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff] pci 0000:00:02.2: can't handle 64-bit address space for bridge In this kernel, unsigned long is 32 bits and dma_addr_t is 64 bits. Previously we used "unsigned long" to hold the bridge window address. But this is a bus address, so we should use dma_addr_t instead. Use dma_addr_t to hold the bridge window base and limit. The question of whether the CPU can actually *address* the window is separate and depends on what the physical address space of the CPU is and whether the host bridge does any address translation. [bhelgaas: fix "shift count > width of type", changelog, stable tag] Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible") Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131 Reported-by: Aaron Ma Tested-by: Aaron Ma Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v3.14+ --- drivers/pci/probe.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 6244b1834dfe..c8ca98c2b480 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -407,15 +407,16 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child) { struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; - unsigned long base, limit; + u64 base64, limit64; + dma_addr_t base, limit; struct pci_bus_region region; struct resource *res; res = child->resource[2]; pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo); - base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16; - limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; + base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16; + limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { u32 mem_base_hi, mem_limit_hi; @@ -429,17 +430,20 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child) * this, just assume they are not being used. */ if (mem_base_hi <= mem_limit_hi) { -#if BITS_PER_LONG == 64 - base |= ((unsigned long) mem_base_hi) << 32; - limit |= ((unsigned long) mem_limit_hi) << 32; -#else - if (mem_base_hi || mem_limit_hi) { - dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n"); - return; - } -#endif + base64 |= (u64) mem_base_hi << 32; + limit64 |= (u64) mem_limit_hi << 32; } } + + base = (dma_addr_t) base64; + limit = (dma_addr_t) limit64; + + if (base != base64) { + dev_err(&dev->dev, "can't handle bridge window above 4GB (bus address %#010llx)\n", + (unsigned long long) base64); + return; + } + if (base <= limit) { res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; -- cgit v1.2.3 From ee7255ada313a6db99be47ce174b0bfb8295a041 Mon Sep 17 00:00:00 2001 From: Anish Bhatt Date: Tue, 18 Nov 2014 19:09:51 -0800 Subject: cxgb4i : Don't block unload/cxgb4 unload when remote closes TCP connection cxgb4i was returning wrong error and not releasing module reference if remote end abruptly closed TCP connection. This prevents the cxgb4 network module from being unloaded, further affecting other network drivers dependent on cxgb4 Sending to net as this affects all cxgb4 based network drivers. Signed-off-by: Anish Bhatt Signed-off-by: David S. Miller --- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 2 ++ drivers/scsi/cxgbi/libcxgbi.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c index 3e0a0d315f72..f48f40ce9f87 100644 --- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c @@ -828,6 +828,8 @@ static void do_act_open_rpl(struct cxgbi_device *cdev, struct sk_buff *skb) if (status == CPL_ERR_RTX_NEG_ADVICE) goto rel_skb; + module_put(THIS_MODULE); + if (status && status != CPL_ERR_TCAM_FULL && status != CPL_ERR_CONN_EXIST && status != CPL_ERR_ARP_MISS) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index 674d498b46ab..9d63853c5fce 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -816,7 +816,7 @@ static void cxgbi_inform_iscsi_conn_closing(struct cxgbi_sock *csk) read_lock_bh(&csk->callback_lock); if (csk->user_data) iscsi_conn_failure(csk->user_data, - ISCSI_ERR_CONN_FAILED); + ISCSI_ERR_TCP_CONN_CLOSE); read_unlock_bh(&csk->callback_lock); } } -- cgit v1.2.3 From 6b19b66013cfe608d63f0dab38834bbaceb0217a Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Wed, 19 Nov 2014 22:52:36 +0100 Subject: hwmon: (g762) fix call to devm_hwmon_device_register_with_groups() g762_remove() needs to first call hwmon_device_unregister() and then g762_of_clock_disable(). For that reason, it is not possible to convert it to devm_hwmon_device_register_with_groups() and the the non device managed version must be used. This is correctly stated in commit message for 398e16db6262 ("hwmon: (g762) Convert to hwmon_device_register_with_groups") but the associated changes do in fact introduce a call to the device managed version of the function. This patch fixes that typo by switching to the non devm_ version. Fixes: 398e16db6262 ("hwmon: (g762) Convert to hwmon_device_register_with_groups") Cc: stable@vger.kernel.org (3.17+) Signed-off-by: Arnaud Ebalard Signed-off-by: Guenter Roeck --- drivers/hwmon/g762.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c index 6aac695b1688..9b55e673b67c 100644 --- a/drivers/hwmon/g762.c +++ b/drivers/hwmon/g762.c @@ -1084,10 +1084,8 @@ static int g762_probe(struct i2c_client *client, const struct i2c_device_id *id) if (ret) goto clock_dis; - data->hwmon_dev = devm_hwmon_device_register_with_groups(dev, - client->name, - data, - g762_groups); + data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + data, g762_groups); if (IS_ERR(data->hwmon_dev)) { ret = PTR_ERR(data->hwmon_dev); goto clock_dis; -- cgit v1.2.3 From 78579b7c7eb45f0e7ec5e9437087ed21749f9a9c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Nov 2014 01:44:11 +0100 Subject: ACPI / PM: Ignore wakeup setting if the ACPI companion can't wake up As reported by Dmitry, on some Chromebooks there are devices with corresponding ACPI objects and with unusual system wakeup configuration. Namely, they technically are wakeup-capable, but the wakeup is handled via a platform-specific out-of-band mechanism and the ACPI PM layer has no information on the wakeup capability. As a result, device_may_wakeup(dev) called from acpi_dev_suspend_late() returns 'true' for those devices, but the wakeup.flags.valid flag is unset for the corresponding ACPI device objects, so acpi_device_wakeup() reproducibly fails for them causing acpi_dev_suspend_late() to return an error code. The entire system suspend is then aborted and the machines in question cannot suspend at all. Address the problem by ignoring the device_may_wakeup(dev) return value in acpi_dev_suspend_late() if the ACPI companion of the device being handled has wakeup.flags.valid unset (in which case it is clear that the wakeup is supposed to be handled by other means). This fixes a regression introduced by commit a76e9bd89ae7 (i2c: attach/detach I2C client device to the ACPI power domain) as the affected systems could suspend and resume successfully before that commit. Fixes: a76e9bd89ae7 (i2c: attach/detach I2C client device to the ACPI power domain) Reported-by: Dmitry Torokhov Reviewed-by: Dmitry Torokhov Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/device_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 143ec6ea1468..7db193160766 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -878,7 +878,7 @@ int acpi_dev_suspend_late(struct device *dev) return 0; target_state = acpi_target_system_state(); - wakeup = device_may_wakeup(dev); + wakeup = device_may_wakeup(dev) && acpi_device_can_wakeup(adev); error = acpi_device_wakeup(adev, target_state, wakeup); if (wakeup && error) return error; -- cgit v1.2.3 From b1a5ad006b34ded9dc7ec64988deba1b3ecad367 Mon Sep 17 00:00:00 2001 From: Chris Moore Date: Tue, 4 Nov 2014 16:28:29 +0000 Subject: IB/isert: Adjust CQ size to HW limits isert has an issue of trying to create a CQ with more CQEs than are supported by the hardware, that currently results in failures during isert_device creation during first session login. This is the isert version of the patch that Minh Tran submitted for iser, and is simple a workaround required to function with existing ocrdma hardware. Signed-off-by: Chris Moore Reviewied-by: Sagi Grimberg Cc: # 3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index a6c7b395c61d..10641b7816f4 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -228,12 +228,16 @@ isert_create_device_ib_res(struct isert_device *device) struct isert_cq_desc *cq_desc; struct ib_device_attr *dev_attr; int ret = 0, i, j; + int max_rx_cqe, max_tx_cqe; dev_attr = &device->dev_attr; ret = isert_query_device(ib_dev, dev_attr); if (ret) return ret; + max_rx_cqe = min(ISER_MAX_RX_CQ_LEN, dev_attr->max_cqe); + max_tx_cqe = min(ISER_MAX_TX_CQ_LEN, dev_attr->max_cqe); + /* asign function handlers */ if (dev_attr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS && dev_attr->device_cap_flags & IB_DEVICE_SIGNATURE_HANDOVER) { @@ -275,7 +279,7 @@ isert_create_device_ib_res(struct isert_device *device) isert_cq_rx_callback, isert_cq_event_callback, (void *)&cq_desc[i], - ISER_MAX_RX_CQ_LEN, i); + max_rx_cqe, i); if (IS_ERR(device->dev_rx_cq[i])) { ret = PTR_ERR(device->dev_rx_cq[i]); device->dev_rx_cq[i] = NULL; @@ -287,7 +291,7 @@ isert_create_device_ib_res(struct isert_device *device) isert_cq_tx_callback, isert_cq_event_callback, (void *)&cq_desc[i], - ISER_MAX_TX_CQ_LEN, i); + max_tx_cqe, i); if (IS_ERR(device->dev_tx_cq[i])) { ret = PTR_ERR(device->dev_tx_cq[i]); device->dev_tx_cq[i] = NULL; -- cgit v1.2.3 From 788ec2fc2ca295a2d929986e95231214ecd8d142 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 19 Nov 2014 17:13:44 +0000 Subject: of/selftest: Fix testing when /aliases is missing The /aliases node isn't always present in the device tree, but the unittest code assumes that /aliases is there. Add a check when inserting the testcase data to see if of_aliases needs to be updated, and undo the settings when the nodes are removed. Signed-off-by: Grant Likely Cc: Rob Herring Cc: Gaurav Minocha Cc: --- drivers/of/selftest.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c index e6c14dc400e9..e2d79afa9dc6 100644 --- a/drivers/of/selftest.c +++ b/drivers/of/selftest.c @@ -899,7 +899,11 @@ static void selftest_data_remove(void) while (last_node_index-- > 0) { if (nodes[last_node_index]) { np = of_find_node_by_path(nodes[last_node_index]->full_name); - if (strcmp(np->full_name, "/aliases") != 0) { + if (np == nodes[last_node_index]) { + if (of_aliases == np) { + of_node_put(of_aliases); + of_aliases = NULL; + } detach_node_and_children(np); } else { for_each_property_of_node(np, prop) { @@ -920,6 +924,8 @@ static int __init of_selftest(void) res = selftest_data_add(); if (res) return res; + if (!of_aliases) + of_aliases = of_find_node_by_path("/aliases"); np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); if (!np) { -- cgit v1.2.3 From 01a4cc4d0cd6a836c7b923760e8eb1cbb6a47258 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Thu, 20 Nov 2014 11:17:33 +0100 Subject: bnx2fc: do not add shared skbs to the fcoe_rx_list In some cases, the fcoe_rx_list may contains multiple instances of the same skb (the so called "shared skbs"). the bnx2fc_l2_rcv thread is a loop that extracts a skb from the list, modifies (and destroys) its content and then proceed to the next one. The problem is that if the skb is shared, the remaining instances will be corrupted. The solution is to use skb_share_check() before adding the skb to the fcoe_rx_list. [ 6286.808725] ------------[ cut here ]------------ [ 6286.808729] WARNING: at include/scsi/fc_frame.h:173 bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc]() [ 6286.808748] Modules linked in: bnx2x(-) mdio dm_service_time bnx2fc cnic uio fcoe libfcoe 8021q garp stp mrp libfc llc scsi_transport_fc scsi_tgt sg iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel e1000e ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper ptp cryptd hpilo serio_raw hpwdt lpc_ich pps_core ipmi_si pcspkr mfd_core ipmi_msghandler shpchp pcc_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit ata_piix drm_kms_helper ttm drm libata i2c_core hpsa dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mdio] [ 6286.808750] CPU: 3 PID: 1304 Comm: bnx2fc_l2_threa Not tainted 3.10.0-121.el7.x86_64 #1 [ 6286.808750] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 6286.808752] 0000000000000000 000000000b36e715 ffff8800deba1e00 ffffffff815ec0ba [ 6286.808753] ffff8800deba1e38 ffffffff8105dee1 ffffffffa05618c0 ffff8801e4c81888 [ 6286.808754] ffffe8ffff663868 ffff8801f402b180 ffff8801f56bc000 ffff8800deba1e48 [ 6286.808754] Call Trace: [ 6286.808759] [] dump_stack+0x19/0x1b [ 6286.808762] [] warn_slowpath_common+0x61/0x80 [ 6286.808763] [] warn_slowpath_null+0x1a/0x20 [ 6286.808765] [] bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc] [ 6286.808767] [] ? bnx2fc_disable+0x90/0x90 [bnx2fc] [ 6286.808769] [] kthread+0xcf/0xe0 [ 6286.808770] [] ? kthread_create_on_node+0x140/0x140 [ 6286.808772] [] ret_from_fork+0x7c/0xb0 [ 6286.808773] [] ? kthread_create_on_node+0x140/0x140 [ 6286.808774] ---[ end trace c6cdb939184ccb4e ]--- Signed-off-by: Maurizio Lombardi Acked-by: Chad Dupuis Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org --- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 79e5c94107a9..72533c58c1f3 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -412,6 +412,7 @@ static int bnx2fc_rcv(struct sk_buff *skb, struct net_device *dev, struct fc_frame_header *fh; struct fcoe_rcv_info *fr; struct fcoe_percpu_s *bg; + struct sk_buff *tmp_skb; unsigned short oxid; interface = container_of(ptype, struct bnx2fc_interface, @@ -424,6 +425,12 @@ static int bnx2fc_rcv(struct sk_buff *skb, struct net_device *dev, goto err; } + tmp_skb = skb_share_check(skb, GFP_ATOMIC); + if (!tmp_skb) + goto err; + + skb = tmp_skb; + if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) { printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n"); goto err; -- cgit v1.2.3 From 1899045510ff109980d9cc34e330fd8ca3631871 Mon Sep 17 00:00:00 2001 From: Christian Sünkenberg Date: Tue, 18 Nov 2014 20:23:32 +0100 Subject: scsi: add Intel Multi-Flex to scsi scan blacklist MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Intel Multi-Flex LUNs choke on REPORT SUPPORTED OPERATION CODES resulting in sd_mod hanging for several minutes on startup. The issue was introduced with WRITE SAME discovery heuristics. Fixes: 5db44863b6eb ("[SCSI] sd: Implement support for WRITE SAME") Signed-off-by: Christian Sünkenberg Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org --- drivers/scsi/scsi_devinfo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 49014a143c6a..c1d04d4d3c6c 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -202,6 +202,7 @@ static struct { {"IOMEGA", "Io20S *F", NULL, BLIST_KEY}, {"INSITE", "Floptical F*8I", NULL, BLIST_KEY}, {"INSITE", "I325VM", NULL, BLIST_KEY}, + {"Intel", "Multi-Flex", NULL, BLIST_NO_RSOC}, {"iRiver", "iFP Mass Driver", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36}, {"LASOUND", "CDX7405", "3.10", BLIST_MAX5LUN | BLIST_SINGLELUN}, {"MATSHITA", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, -- cgit v1.2.3 From 7c48bfd038e570cd12b33d6ab13316f3a0b0d1a7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Thu, 23 Oct 2014 13:25:12 +0300 Subject: ufs: fix reference counting of W-LUs UFS driver adds three well known LUs in the initialization, but those reference counts are not decremented, so it makes ufshcd module impossible to unload. This fixes it by putting scsi_device_put() in the initalization, and in order to protect concurrent access to hba->sdev_ufs_device (UFS Device W-LU) from manual delete, increment the reference count while requesting device power mode setting. The rest of W-LUs (hba->sdev_boot and hba->sdev_rpmb) are not directly used from driver, so these references in struct ufs_hba are removed. Signed-off-by: Akinobu Mita Reviewed-by: Maya Erez Reviewed-by: Dolev Raviv Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd.c | 74 +++++++++++++++++++++++------------------------ drivers/scsi/ufs/ufshcd.h | 2 -- 2 files changed, 36 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 497c38a4a866..59b654467d48 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -2844,8 +2844,13 @@ static void ufshcd_slave_destroy(struct scsi_device *sdev) hba = shost_priv(sdev->host); scsi_deactivate_tcq(sdev, hba->nutrs); /* Drop the reference as it won't be needed anymore */ - if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) + if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); hba->sdev_ufs_device = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + } } /** @@ -4062,6 +4067,8 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba) static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) { int ret = 0; + struct scsi_device *sdev_rpmb; + struct scsi_device *sdev_boot; hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0, ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN), NULL); @@ -4070,56 +4077,33 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) hba->sdev_ufs_device = NULL; goto out; } + scsi_device_put(hba->sdev_ufs_device); - hba->sdev_boot = __scsi_add_device(hba->host, 0, 0, + sdev_boot = __scsi_add_device(hba->host, 0, 0, ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL); - if (IS_ERR(hba->sdev_boot)) { - ret = PTR_ERR(hba->sdev_boot); - hba->sdev_boot = NULL; + if (IS_ERR(sdev_boot)) { + ret = PTR_ERR(sdev_boot); goto remove_sdev_ufs_device; } + scsi_device_put(sdev_boot); - hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0, + sdev_rpmb = __scsi_add_device(hba->host, 0, 0, ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL); - if (IS_ERR(hba->sdev_rpmb)) { - ret = PTR_ERR(hba->sdev_rpmb); - hba->sdev_rpmb = NULL; + if (IS_ERR(sdev_rpmb)) { + ret = PTR_ERR(sdev_rpmb); goto remove_sdev_boot; } + scsi_device_put(sdev_rpmb); goto out; remove_sdev_boot: - scsi_remove_device(hba->sdev_boot); + scsi_remove_device(sdev_boot); remove_sdev_ufs_device: scsi_remove_device(hba->sdev_ufs_device); out: return ret; } -/** - * ufshcd_scsi_remove_wlus - Removes the W-LUs which were added by - * ufshcd_scsi_add_wlus() - * @hba: per-adapter instance - * - */ -static void ufshcd_scsi_remove_wlus(struct ufs_hba *hba) -{ - if (hba->sdev_ufs_device) { - scsi_remove_device(hba->sdev_ufs_device); - hba->sdev_ufs_device = NULL; - } - - if (hba->sdev_boot) { - scsi_remove_device(hba->sdev_boot); - hba->sdev_boot = NULL; - } - - if (hba->sdev_rpmb) { - scsi_remove_device(hba->sdev_rpmb); - hba->sdev_rpmb = NULL; - } -} - /** * ufshcd_probe_hba - probe hba to detect device and initialize * @hba: per-adapter instance @@ -4675,11 +4659,25 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, { unsigned char cmd[6] = { START_STOP }; struct scsi_sense_hdr sshdr; - struct scsi_device *sdp = hba->sdev_ufs_device; + struct scsi_device *sdp; + unsigned long flags; int ret; - if (!sdp || !scsi_device_online(sdp)) - return -ENODEV; + spin_lock_irqsave(hba->host->host_lock, flags); + sdp = hba->sdev_ufs_device; + if (sdp) { + ret = scsi_device_get(sdp); + if (!ret && !scsi_device_online(sdp)) { + ret = -ENODEV; + scsi_device_put(sdp); + } + } else { + ret = -ENODEV; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (ret) + return ret; /* * If scsi commands fail, the scsi mid-layer schedules scsi error- @@ -4718,6 +4716,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, if (!ret) hba->curr_dev_pwr_mode = pwr_mode; out: + scsi_device_put(sdp); hba->host->eh_noresume = 0; return ret; } @@ -5231,7 +5230,6 @@ EXPORT_SYMBOL(ufshcd_shutdown); void ufshcd_remove(struct ufs_hba *hba) { scsi_remove_host(hba->host); - ufshcd_scsi_remove_wlus(hba); /* disable interrupts */ ufshcd_disable_intr(hba, hba->intr_mask); ufshcd_hba_stop(hba); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 58ecdff5065c..4a574aa45855 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -392,8 +392,6 @@ struct ufs_hba { * "UFS device" W-LU. */ struct scsi_device *sdev_ufs_device; - struct scsi_device *sdev_rpmb; - struct scsi_device *sdev_boot; enum ufs_dev_pwr_mode curr_dev_pwr_mode; enum uic_link_state uic_link_state; -- cgit v1.2.3 From 5064636c759628caee3b855048be25a9a33cc8ad Mon Sep 17 00:00:00 2001 From: Yaniv Gardi Date: Thu, 23 Oct 2014 13:25:13 +0300 Subject: ufs: fix power info after link start-up After link start-up power mode will always be PWM G1. This is not reflected in the pwr_info struct which will keep the previous values. Since ufshcd_change_power_mode() tries to avoid unnecessary power mode change if the requested power mode and current power mode are same, power mode change won't execute again after driver initialization. This patch solves the problem by setting pwr_info to PWM G1 after link start-up. Signed-off-by: Yaniv Gardi Signed-off-by: Dolev Raviv Reviewed-by: Maya Erez Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 59b654467d48..77a4e38020ed 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -2246,6 +2246,22 @@ static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) return ret; } + /** + * ufshcd_init_pwr_info - setting the POR (power on reset) + * values in hba power info + * @hba: per-adapter instance + */ +static void ufshcd_init_pwr_info(struct ufs_hba *hba) +{ + hba->pwr_info.gear_rx = UFS_PWM_G1; + hba->pwr_info.gear_tx = UFS_PWM_G1; + hba->pwr_info.lane_rx = 1; + hba->pwr_info.lane_tx = 1; + hba->pwr_info.pwr_rx = SLOWAUTO_MODE; + hba->pwr_info.pwr_tx = SLOWAUTO_MODE; + hba->pwr_info.hs_rate = 0; +} + /** * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device * @hba: per-adapter instance @@ -4118,6 +4134,8 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) if (ret) goto out; + ufshcd_init_pwr_info(hba); + /* UniPro link is active now */ ufshcd_set_link_active(hba); -- cgit v1.2.3 From b7bc596ebbe0cddc97d76ef9309f64471bbf13eb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Nov 2014 13:12:54 -0500 Subject: drm/radeon: disable native backlight control on pre-r6xx asics (v2) Just use the acpi interface. That's what windows uses on this generation and it's the only thing that seems to work reliably on these generation parts. You can still force the native backlight interface by setting radeon.backlight=1 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=88501 v2: merge into above if/else block Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_encoders.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 9a19e52cc655..6b670b0bc47b 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -179,6 +179,9 @@ static void radeon_encoder_add_backlight(struct radeon_encoder *radeon_encoder, (rdev->pdev->subsystem_vendor == 0x1734) && (rdev->pdev->subsystem_device == 0x1107)) use_bl = false; + /* disable native backlight control on older asics */ + else if (rdev->family < CHIP_R600) + use_bl = false; else use_bl = true; } -- cgit v1.2.3 From 28731d5818ae25b92d1fb82fe0ac196e97102c1b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 12 Nov 2014 19:17:02 -0500 Subject: drm/radeon: fix endian swapping in vbios fetch for tdp table Value needs to be swapped on BE. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c index f6309bd23e01..b5c73df8e202 100644 --- a/drivers/gpu/drm/radeon/r600_dpm.c +++ b/drivers/gpu/drm/radeon/r600_dpm.c @@ -1256,7 +1256,7 @@ int r600_parse_extended_power_table(struct radeon_device *rdev) (mode_info->atom_context->bios + data_offset + le16_to_cpu(ext_hdr->usPowerTuneTableOffset)); rdev->pm.dpm.dyn_state.cac_tdp_table->maximum_power_delivery_limit = - ppt->usMaximumPowerDeliveryLimit; + le16_to_cpu(ppt->usMaximumPowerDeliveryLimit); pt = &ppt->power_tune_table; } else { ATOM_PPLIB_POWERTUNE_Table *ppt = (ATOM_PPLIB_POWERTUNE_Table *) -- cgit v1.2.3 From 233b594bdf6d846f03816eec1c19ccbd7e4618c0 Mon Sep 17 00:00:00 2001 From: Dolev Raviv Date: Thu, 23 Oct 2014 13:25:14 +0300 Subject: scsi: ufs: fix static checker errors in ufshcd_system_suspend This patch fixes newly introduced sparse warning in ufshcd_system_suspend, introduced by UFS power management series. Sparse warning: drivers/scsi/ufs/ufshcd.c:5118 ufshcd_system_suspend() error: we previously assumed 'hba' could be null (see line 5089) To fix it, we return 0 in case HBA is not initialized or is not powered. Signed-off-by: Dolev Raviv Reviewed-by: Maya Erez Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 77a4e38020ed..d3f6ddb5d99b 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5104,7 +5104,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba) int ret = 0; if (!hba || !hba->is_powered) - goto out; + return 0; if (pm_runtime_suspended(hba->dev)) { if (hba->rpm_lvl == hba->spm_lvl) -- cgit v1.2.3 From 758581b929ce50ae3a5cf80735e3e58ef45c31b5 Mon Sep 17 00:00:00 2001 From: Dolev Raviv Date: Thu, 23 Oct 2014 13:25:15 +0300 Subject: scsi: ufs: fix static checker warning in ufshcd_populate_vreg This patch fixes newly introduced static checker warning in ufshcd_populate_vreg, introduced by UFS power management series. Warning: drivers/scsi/ufs/ufshcd-pltfrm.c:167 ufshcd_populate_vreg() warn: missing error code here? 'devm_kzalloc()' failed. 'ret' = '0' To fix it we return -ENOMEM and skip the message print. Signed-off-by: Dolev Raviv Reviewed-by: Maya Erez Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd-pltfrm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 8adf067ff019..2cdec7847e73 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -162,10 +162,8 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name, } vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL); - if (!vreg) { - dev_err(dev, "No memory for %s regulator\n", name); - goto out; - } + if (!vreg) + return -ENOMEM; vreg->name = kstrdup(name, GFP_KERNEL); -- cgit v1.2.3 From eda910e4d03af878482055ce511a522d9bbda0e8 Mon Sep 17 00:00:00 2001 From: Dolev Raviv Date: Thu, 23 Oct 2014 13:25:16 +0300 Subject: scsi: ufs: fix static checker warning in __ufshcd_setup_clocks This patch fixes newly introduced static checker warning in __ufshcd_setup_clocks, introduced by UFS power management series. Warning: drivers/scsi/ufs/ufshcd.c:4474 __ufshcd_setup_clocks() warn: we tested 'ret' before and it was 'false' To fix it we remove the (!ret) from the condition. Signed-off-by: Dolev Raviv Reviewed-by: Maya Erez Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index d3f6ddb5d99b..b9da4463cefb 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4473,7 +4473,7 @@ out: if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled) clk_disable_unprepare(clki->clk); } - } else if (!ret && on) { + } else if (on) { spin_lock_irqsave(hba->host->host_lock, flags); hba->clk_gating.state = CLKS_ON; spin_unlock_irqrestore(hba->host->host_lock, flags); -- cgit v1.2.3 From e8cb64db81e8c88c5c824ca74c2e57b4c6919ca6 Mon Sep 17 00:00:00 2001 From: Dolev Raviv Date: Thu, 23 Oct 2014 13:25:17 +0300 Subject: scsi: ufs: fix static checker warning in ufshcd_parse_clock_info This patch fixes newly introduced static checker warning in ufshcd_parse_clock_info, introduced by UFS power management series. Warning: drivers/scsi/ufs/ufshcd-pltfrm.c:138 ufshcd_parse_clock_info() warn: passing devm_ allocated variable to kfree. 'clkfreq' To fix it we remove the kfree(clkfreq) statement. In addition we removed the redundant goto label. Signed-off-by: Dolev Raviv Reviewed-by: Maya Erez Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd-pltfrm.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 2cdec7847e73..1c3467b82566 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -102,7 +102,6 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba) clkfreq = devm_kzalloc(dev, sz * sizeof(*clkfreq), GFP_KERNEL); if (!clkfreq) { - dev_err(dev, "%s: no memory\n", "freq-table-hz"); ret = -ENOMEM; goto out; } @@ -112,19 +111,19 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba) if (ret && (ret != -EINVAL)) { dev_err(dev, "%s: error reading array %d\n", "freq-table-hz", ret); - goto free_clkfreq; + return ret; } for (i = 0; i < sz; i += 2) { ret = of_property_read_string_index(np, "clock-names", i/2, (const char **)&name); if (ret) - goto free_clkfreq; + goto out; clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL); if (!clki) { ret = -ENOMEM; - goto free_clkfreq; + goto out; } clki->min_freq = clkfreq[i]; @@ -134,8 +133,6 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba) clki->min_freq, clki->max_freq, clki->name); list_add_tail(&clki->list, &hba->clk_list_head); } -free_clkfreq: - kfree(clkfreq); out: return ret; } -- cgit v1.2.3 From a1d69c60c44134f64945bbf6a6dfda22eaf4a214 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 19 Nov 2014 22:13:10 +0100 Subject: brcmfmac: don't include linux/unaligned/access_ok.h This is a specific implementation, is the multiplexer that has the arch-specific knowledge of which of the implementations needs to be used, so include that. This issue was revealed by kbuild testing when was added in resulting in redefinition of get_unaligned_be16 (and probably others). Cc: stable@vger.kernel.org # v3.17 Reported-by: Fengguang Wu Signed-off-by: Johannes Berg Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c index 8c0632ec9f7a..16fef3382019 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c @@ -19,10 +19,10 @@ #include #include #include -#include #include #include #include +#include #include #include -- cgit v1.2.3 From 2dcd851fe4b4fe60c2f8520bf7668d7e9b2dd76b Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Fri, 7 Nov 2014 19:12:29 +0530 Subject: thermal: cpu_cooling: Update always cpufreq policy with thermal constraints Existing code updates cupfreq policy only while executing cpufreq_apply_cooling() function (i.e. when notify_device != NOTIFY_INVALID). It doesn't apply constraints when cpufreq policy update happens from any other place but it should update the cpufreq policy with thermal constraints every time when there is a cpufreq policy update, to keep state of cpufreq_cooling_device and max_feq of cpufreq policy in sync. For instance while resuming cpufreq updates cpufreq_policy and it restores default policy->usr_policy values irrespective of cooling device's cpufreq_state since notification gets missed because (notify_device == NOTIFY_INVALID). Another problem, is that userspace is able to change max_freq irrespective of cooling device's state, as notification gets missed. This patch modifies code to maintain a global cpufreq_dev_list and applies constraints of all matching cooling devices for policy's cpu when there is any policy update(ends up applying the lowest max_freq among the matching cpu cooling devices). This patch also removes redundant check (max_freq > policy->user_policy.max), as cpufreq framework takes care of user_policy constraints already where ever required, otherwise its causing an issue while increasing max_freq in normal scenerio as it restores max_freq with policy->user_policy.max which is old (smaller) value. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 1ab0018271c5..ad09e51ffae4 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -50,15 +50,14 @@ struct cpufreq_cooling_device { unsigned int cpufreq_state; unsigned int cpufreq_val; struct cpumask allowed_cpus; + struct list_head node; }; static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); static unsigned int cpufreq_dev_count; -/* notify_table passes value to the CPUFREQ_ADJUST callback function. */ -#define NOTIFY_INVALID NULL -static struct cpufreq_cooling_device *notify_device; +static LIST_HEAD(cpufreq_dev_list); /** * get_idr - function to get a unique id. @@ -287,15 +286,12 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, cpufreq_device->cpufreq_state = cooling_state; cpufreq_device->cpufreq_val = clip_freq; - notify_device = cpufreq_device; for_each_cpu(cpuid, mask) { if (is_cpufreq_valid(cpuid)) cpufreq_update_policy(cpuid); } - notify_device = NOTIFY_INVALID; - return 0; } @@ -316,21 +312,28 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, { struct cpufreq_policy *policy = data; unsigned long max_freq = 0; + struct cpufreq_cooling_device *cpufreq_dev; - if (event != CPUFREQ_ADJUST || notify_device == NOTIFY_INVALID) + if (event != CPUFREQ_ADJUST) return 0; - if (cpumask_test_cpu(policy->cpu, ¬ify_device->allowed_cpus)) - max_freq = notify_device->cpufreq_val; - else - return 0; + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (!cpumask_test_cpu(policy->cpu, + &cpufreq_dev->allowed_cpus)) + continue; + + if (!cpufreq_dev->cpufreq_val) + cpufreq_dev->cpufreq_val = get_cpu_frequency( + cpumask_any(&cpufreq_dev->allowed_cpus), + cpufreq_dev->cpufreq_state); - /* Never exceed user_policy.max */ - if (max_freq > policy->user_policy.max) - max_freq = policy->user_policy.max; + max_freq = cpufreq_dev->cpufreq_val; - if (policy->max != max_freq) - cpufreq_verify_within_limits(policy, 0, max_freq); + if (policy->max != max_freq) + cpufreq_verify_within_limits(policy, 0, max_freq); + } + mutex_unlock(&cooling_cpufreq_lock); return 0; } @@ -486,6 +489,7 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_register_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); cpufreq_dev_count++; + list_add(&cpufreq_dev->node, &cpufreq_dev_list); mutex_unlock(&cooling_cpufreq_lock); @@ -549,6 +553,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) cpufreq_dev = cdev->devdata; mutex_lock(&cooling_cpufreq_lock); + list_del(&cpufreq_dev->node); cpufreq_dev_count--; /* Unregister the notifier for the last cpufreq cooling device */ -- cgit v1.2.3 From a5f6fc28d6e6cc379c6839f21820e62262419584 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Nov 2014 18:05:26 +0100 Subject: pptp: fix stack info leak in pptp_getname() pptp_getname() only partially initializes the stack variable sa, particularly only fills the pptp part of the sa_addr union. The code thereby discloses 16 bytes of kernel stack memory via getsockname(). Fix this by memset(0)'ing the union before. Cc: Dmitry Kozlov Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/net/ppp/pptp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 1aff970be33e..1dc628ffce2b 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -506,7 +506,9 @@ static int pptp_getname(struct socket *sock, struct sockaddr *uaddr, int len = sizeof(struct sockaddr_pppox); struct sockaddr_pppox sp; - sp.sa_family = AF_PPPOX; + memset(&sp.sa_addr, 0, sizeof(sp.sa_addr)); + + sp.sa_family = AF_PPPOX; sp.sa_protocol = PX_PROTO_PPTP; sp.sa_addr.pptp = pppox_sk(sock->sk)->proto.pptp.src_addr; -- cgit v1.2.3 From 17544e2ad78fa0bbff6fcdbf09426d04ce95ed1e Mon Sep 17 00:00:00 2001 From: Anish Bhatt Date: Thu, 20 Nov 2014 17:11:46 -0800 Subject: cxgb4 : Fix DCB priority groups being returned in wrong order Peer priority groups were being reversed, but this was missed in the previous fix sent out for this issue. v2 : Previous patch was doing extra unnecessary work, result is the same. Please ignore previous patch Fixes : ee7bc3cdc270 ('cxgb4 : dcb open-lldp interop fixes') Signed-off-by: Anish Bhatt Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c index cca604994003..4fe33606f372 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c @@ -1082,7 +1082,7 @@ static int cxgb4_cee_peer_getpg(struct net_device *dev, struct cee_pg *pg) pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid); for (i = 0; i < CXGB4_MAX_PRIORITY; i++) - pg->prio_pg[i] = (pgid >> (i * 4)) & 0xF; + pg->prio_pg[7 - i] = (pgid >> (i * 4)) & 0xF; INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id); pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE; -- cgit v1.2.3 From 892d6eb1245b771987afb8667a65344e568d3439 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 20 Nov 2014 17:03:05 +0800 Subject: virtio-net: validate features during probe We currently trigger BUG when VIRTIO_NET_F_CTRL_VQ is not set but one of features depending on it is. That's not a friendly way to report errors to hypervisors. Let's check, and fail probe instead. Cc: Rusty Russell Cc: Cornelia Huck Cc: Wanlong Gao Signed-off-by: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Cornelia Huck Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index ec2a8b41ed41..b0bc8ead47de 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1673,6 +1673,40 @@ static const struct attribute_group virtio_net_mrg_rx_group = { }; #endif +static bool virtnet_fail_on_feature(struct virtio_device *vdev, + unsigned int fbit, + const char *fname, const char *dname) +{ + if (!virtio_has_feature(vdev, fbit)) + return false; + + dev_err(&vdev->dev, "device advertises feature %s but not %s", + fname, dname); + + return true; +} + +#define VIRTNET_FAIL_ON(vdev, fbit, dbit) \ + virtnet_fail_on_feature(vdev, fbit, #fbit, dbit) + +static bool virtnet_validate_features(struct virtio_device *vdev) +{ + if (!virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) && + (VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_RX, + "VIRTIO_NET_F_CTRL_VQ") || + VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_VLAN, + "VIRTIO_NET_F_CTRL_VQ") || + VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE, + "VIRTIO_NET_F_CTRL_VQ") || + VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_MQ, "VIRTIO_NET_F_CTRL_VQ") || + VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR, + "VIRTIO_NET_F_CTRL_VQ"))) { + return false; + } + + return true; +} + static int virtnet_probe(struct virtio_device *vdev) { int i, err; @@ -1680,6 +1714,9 @@ static int virtnet_probe(struct virtio_device *vdev) struct virtnet_info *vi; u16 max_queue_pairs; + if (!virtnet_validate_features(vdev)) + return -EINVAL; + /* Find if host supports multiqueue virtio_net device */ err = virtio_cread_feature(vdev, VIRTIO_NET_F_MQ, struct virtio_net_config, -- cgit v1.2.3 From e60a342bc494228d820dd801e9bfd72fbf829bc4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 19 Nov 2014 15:50:31 +0000 Subject: thermal: sti: Ignore suspend/resume functions when !PM_SLEEP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prevents build warning: st_thermal.c:278:12: warning: ‘st_thermal_suspend’ defined but not used [-Wunused-function] st_thermal.c:286:12: warning: ‘st_thermal_resume’ defined but not used [-Wunused-function] Acked-by: Maxime Coquelin Signed-off-by: Lee Jones Signed-off-by: Eduardo Valentin --- drivers/thermal/st/st_thermal.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c index 90163b384660..d1ec5804c0bb 100644 --- a/drivers/thermal/st/st_thermal.c +++ b/drivers/thermal/st/st_thermal.c @@ -275,6 +275,7 @@ int st_thermal_unregister(struct platform_device *pdev) } EXPORT_SYMBOL_GPL(st_thermal_unregister); +#ifdef CONFIG_PM_SLEEP static int st_thermal_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -305,6 +306,8 @@ static int st_thermal_resume(struct device *dev) return 0; } +#endif + SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume); EXPORT_SYMBOL_GPL(st_thermal_pm_ops); -- cgit v1.2.3 From d3e19567fa85e1a0dab02205b89b2908084ecadd Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Fri, 21 Nov 2014 17:11:49 +0100 Subject: thermal: Exynos: Deletion of unnecessary checks before two function calls The functions cpufreq_cooling_unregister() and thermal_zone_device_unregister() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/exynos_thermal_common.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index 3f5ad25ddca8..b6be572704a4 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -417,13 +417,10 @@ void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) th_zone = sensor_conf->pzone_data; - if (th_zone->therm_dev) - thermal_zone_device_unregister(th_zone->therm_dev); + thermal_zone_device_unregister(th_zone->therm_dev); - for (i = 0; i < th_zone->cool_dev_size; i++) { - if (th_zone->cool_dev[i]) - cpufreq_cooling_unregister(th_zone->cool_dev[i]); - } + for (i = 0; i < th_zone->cool_dev_size; ++i) + cpufreq_cooling_unregister(th_zone->cool_dev[i]); dev_info(sensor_conf->dev, "Exynos: Kernel Thermal management unregistered\n"); -- cgit v1.2.3 From 8daee1352d51a32676b84bddcc0e3252d1caa833 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Nov 2014 13:28:03 +0100 Subject: USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly, so we need to fall-back to usb-storage for these. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2fefaf923e4a..18a283d6de1c 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -103,3 +103,10 @@ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VL711", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), + +/* Reported-by: Hans de Goede */ +UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999, + "Hitachi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), -- cgit v1.2.3 From c3492dbfa1050debf23a5b5cd2bc7514c5b37896 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:11 +0200 Subject: USB: xhci: don't start a halted endpoint before its new dequeue is set A halted endpoint ring must first be reset, then move the ring dequeue pointer past the problematic TRB. If we start the ring too early after reset, but before moving the dequeue pointer we will end up executing the same problematic TRB again. As we always issue a set transfer dequeue command after a reset endpoint command we can skip starting endpoint rings at reset endpoint command completion. Without this fix we end up trying to handle the same faulty TD for contol endpoints. causing timeout, and failing testusb ctrl_out write tests. Fixes: e9df17e (USB: xhci: Correct assumptions about number of rings per endpoint.) Cc: #v2.6.35 Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc6fcbc16f61..fbd0342af286 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1067,9 +1067,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, false); xhci_ring_cmd_db(xhci); } else { - /* Clear our internal halted state and restart the ring(s) */ + /* Clear our internal halted state */ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } } -- cgit v1.2.3 From 9b41ebd3cf0f68d8cad779d3eeba336f78262e43 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 18 Nov 2014 11:27:13 +0200 Subject: Revert "xhci: clear root port wake on bits if controller isn't wake-up capable" commit ff8cbf250b44 ("xhci: clear root port wake on bits if controller isn't") can cause device detection error if runtime PM is enabled, and S3 wake is disabled. Revert it. https://bugzilla.kernel.org/show_bug.cgi?id=85701 This commit got into stable and should be reverted from there as well. Cc: stable # v3.2+ Signed-off-by: Lu Baolu Reported-by: Dmitry Nezhevenko [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 696160d48ae8..388cfd83b6b6 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -22,7 +22,6 @@ #include -#include #include #include "xhci.h" @@ -1149,9 +1148,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup - && device_may_wakeup(hcd->self.controller)) { - + if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; -- cgit v1.2.3 From 8e71a322fdb127814bcba423a512914ca5bc6cf5 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:12 +0200 Subject: USB: xhci: Reset a halted endpoint immediately when we encounter a stall. If a device is halted and reuturns a STALL, then the halted endpoint needs to be cleared both on the host and device side. The host side halt is cleared by issueing a xhci reset endpoint command. The device side is cleared with a ClearFeature(ENDPOINT_HALT) request, which should be issued by the device driver if a URB reruen -EPIPE. Previously we cleared the host side halt after the device side was cleared. To make sure the host side halt is cleared in time we want to issue the reset endpoint command immedialtely when a STALL status is encountered. Otherwise we end up not following the specs and not returning -EPIPE several times in a row when trying to transfer data to a halted endpoint. Fixes: bcef3fd (USB: xhci: Handle errors that cause endpoint halts.) Cc: # v2.6.33+ Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 40 +++++++-------------------- drivers/usb/host/xhci.c | 65 ++++++++++---------------------------------- 2 files changed, 25 insertions(+), 80 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fbd0342af286..06433aec81d7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1822,22 +1822,13 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, ep->stopped_td = td; return 0; } else { - if (trb_comp_code == COMP_STALL) { - /* The transfer is completed from the driver's - * perspective, but we need to issue a set dequeue - * command for this stalled endpoint to move the dequeue - * pointer past the TD. We can't do that here because - * the halt condition must be cleared first. Let the - * USB class driver clear the stall later. - */ - ep->stopped_td = td; - ep->stopped_stream = ep_ring->stream_id; - } else if (xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) { - /* Other types of errors halt the endpoint, but the - * class driver doesn't call usb_reset_endpoint() unless - * the error is -EPIPE. Clear the halted status in the - * xHCI hardware manually. + if (trb_comp_code == COMP_STALL || + xhci_requires_manual_halt_cleanup(xhci, ep_ctx, + trb_comp_code)) { + /* Issue a reset endpoint command to clear the host side + * halt, followed by a set dequeue command to move the + * dequeue pointer past the TD. + * The class driver clears the device side halt later. */ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index, ep_ring->stream_id, @@ -1957,9 +1948,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, else td->urb->actual_length = 0; - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, 0, td, event_trb); - return finish_td(xhci, td, event_trb, event, ep, status, true); + return finish_td(xhci, td, event_trb, event, ep, status, false); } /* * Did we transfer any data, despite the errors that might have @@ -2518,17 +2507,8 @@ cleanup: if (ret) { urb = td->urb; urb_priv = urb->hcpriv; - /* Leave the TD around for the reset endpoint function - * to use(but only if it's not a control endpoint, - * since we already queued the Set TR dequeue pointer - * command for stalled control endpoints). - */ - if (usb_endpoint_xfer_control(&urb->ep->desc) || - (trb_comp_code != COMP_STALL && - trb_comp_code != COMP_BABBLE)) - xhci_urb_free_priv(xhci, urb_priv); - else - kfree(urb_priv); + + xhci_urb_free_priv(xhci, urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); if ((urb->actual_length != urb->transfer_buffer_length && diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2a5d45b4cb15..4d0d2407b71c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2912,68 +2912,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, } } -/* Deal with stalled endpoints. The core should have sent the control message - * to clear the halt condition. However, we need to make the xHCI hardware - * reset its sequence number, since a device will expect a sequence number of - * zero after the halt condition is cleared. +/* Called when clearing halted device. The core should have sent the control + * message to clear the device halt condition. The host side of the halt should + * already be cleared with a reset endpoint command issued when the STALL tx + * event was received. + * * Context: in_interrupt */ + void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct usb_device *udev; - unsigned int ep_index; - unsigned long flags; - int ret; - struct xhci_virt_ep *virt_ep; - struct xhci_command *command; xhci = hcd_to_xhci(hcd); - udev = (struct usb_device *) ep->hcpriv; - /* Called with a root hub endpoint (or an endpoint that wasn't added - * with xhci_add_endpoint() - */ - if (!ep->hcpriv) - return; - ep_index = xhci_get_endpoint_index(&ep->desc); - virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; - if (!virt_ep->stopped_td) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Endpoint 0x%x not halted, refusing to reset.", - ep->desc.bEndpointAddress); - return; - } - if (usb_endpoint_xfer_control(&ep->desc)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Control endpoint stall already handled."); - return; - } - - command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); - if (!command) - return; - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Queueing reset endpoint command"); - spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); /* - * Can't change the ring dequeue pointer until it's transitioned to the - * stopped state, which is only upon a successful reset endpoint - * command. Better hope that last command worked! + * We might need to implement the config ep cmd in xhci 4.8.1 note: + * The Reset Endpoint Command may only be issued to endpoints in the + * Halted state. If software wishes reset the Data Toggle or Sequence + * Number of an endpoint that isn't in the Halted state, then software + * may issue a Configure Endpoint Command with the Drop and Add bits set + * for the target endpoint. that is in the Stopped state. */ - if (!ret) { - xhci_cleanup_stalled_ring(xhci, udev, ep_index); - kfree(virt_ep->stopped_td); - xhci_ring_cmd_db(xhci); - } - virt_ep->stopped_td = NULL; - virt_ep->stopped_stream = 0; - spin_unlock_irqrestore(&xhci->lock, flags); - if (ret) - xhci_warn(xhci, "FIXME allocate a new ring segment\n"); + /* For now just print debug to follow the situation */ + xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n", + ep->desc.bEndpointAddress); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, -- cgit v1.2.3 From a1377e5397ab321e21b793ec8cd2b6f12bd3c718 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 18 Nov 2014 11:27:14 +0200 Subject: usb: xhci: rework root port wake bits if controller isn't allowed to wakeup When system is being suspended, if host device is not allowed to do wakeup, xhci_suspend() needs to clear all root port wake on bits. Otherwise, some platforms may generate spurious wakeup, even if PCI PME# is disabled. The initial commit ff8cbf250b44 ("xhci: clear root port wake on bits"), which also got into stable, turned out to not work correctly and had to be reverted, and is now rewritten. Cc: stable # v3.2+ Signed-off-by: Lu Baolu Suggested-by: Alan Stern Acked-by: Alan Stern [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 +- drivers/usb/host/xhci-plat.c | 10 +++++++++- drivers/usb/host/xhci.c | 42 +++++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 2 +- 4 files changed, 52 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 9a69b1f1b300..142b601f9563 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pdev->no_d3cold = true; - return xhci_suspend(xhci); + return xhci_suspend(xhci, do_wakeup); } static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 3d78b0cd674b..646300cbe5f7 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -204,7 +204,15 @@ static int xhci_plat_suspend(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); - return xhci_suspend(xhci); + /* + * xhci_suspend() needs `do_wakeup` to know whether host is allowed + * to do wakeup during suspend. Since xhci_plat_suspend is currently + * only designed for system suspend, device_may_wakeup() is enough + * to dertermine whether host is allowed to do wakeup. Need to + * reconsider this when xhci_plat_suspend enlarges its scope, e.g., + * also applies to runtime suspend. + */ + return xhci_suspend(xhci, device_may_wakeup(dev)); } static int xhci_plat_resume(struct device *dev) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 4d0d2407b71c..033b46c470bd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -35,6 +35,8 @@ #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) + /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); @@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) xhci_set_cmd_ring_deq(xhci); } +static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) +{ + int port_index; + __le32 __iomem **port_array; + unsigned long flags; + u32 t1, t2; + + spin_lock_irqsave(&xhci->lock, flags); + + /* disble usb3 ports Wake bits*/ + port_index = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + /* disble usb2 ports Wake bits*/ + port_index = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + spin_unlock_irqrestore(&xhci->lock, flags); +} + /* * Stop HC (not bus-specific) * * This is called when the machine transition into S3/S4 mode. * */ -int xhci_suspend(struct xhci_hcd *xhci) +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) { int rc = 0; unsigned int delay = XHCI_MAX_HALT_USEC; @@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci) xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; + /* Clear root port wake on bits if wakeup not allowed. */ + if (!do_wakeup) + xhci_disable_port_wake_on_bits(xhci); + /* Don't poll the roothubs on bus suspend. */ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index df76d642e719..d745715a1e2f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1746,7 +1746,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)); #ifdef CONFIG_PM -int xhci_suspend(struct xhci_hcd *xhci); +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); int xhci_resume(struct xhci_hcd *xhci, bool hibernated); #else #define xhci_suspend NULL -- cgit v1.2.3 From 4556dc591691fca743518edb24f15fbc83b5c8ef Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 21 Nov 2014 23:52:52 -0800 Subject: ixgbe: Correctly disable VLAN filter in promiscuous mode IXGBE adapter seems to require that VLAN filtering be enabled if VMDQ or SRIOV are enabled. When those functions are disabled, VLAN filtering may be disabled in promiscuous mode. Prior to commit a9b8943ee129 ("ixgbe: remove vlan_filter_disable and enable functions") The logic was correct. However, after the commit the logic got reversed and VLAN filtered in now turned on when VMDQ/SRIOV is disabled. This patch changes the condition to enable hw vlan filtered when VMDQ or SRIOV is enabled. Fixes: a9b8943ee129 ("ixgbe: remove vlan_filter_disable and enable functions") Cc: stable CC: Jacob Keller Signed-off-by: Vladislav Yasevich Acked-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index d2df4e3d1032..7acde46df192 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3936,8 +3936,8 @@ void ixgbe_set_rx_mode(struct net_device *netdev) * if SR-IOV and VMDQ are disabled - otherwise ensure * that hardware VLAN filters remain enabled. */ - if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED | - IXGBE_FLAG_SRIOV_ENABLED))) + if (adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED | + IXGBE_FLAG_SRIOV_ENABLED)) vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); } else { if (netdev->flags & IFF_ALLMULTI) { -- cgit v1.2.3 From b5b2ffc0574e1f271d79b6b992ee382dc9d5eaa8 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 21 Nov 2014 23:52:53 -0800 Subject: ixgbe: fix use after free adapter->state test in ixgbe_remove/ixgbe_probe While working on a different issue, I noticed an annoying use after free bug on my machine when unloading the ixgbe driver: [ 8642.318797] ixgbe 0000:02:00.1: removed PHC on p2p2 [ 8642.742716] ixgbe 0000:02:00.1: complete [ 8642.743784] BUG: unable to handle kernel paging request at ffff8807d3740a90 [ 8642.744828] IP: [] ixgbe_remove+0xfc/0x1b0 [ixgbe] [ 8642.745886] PGD 20c6067 PUD 81c1f6067 PMD 81c15a067 PTE 80000007d3740060 [ 8642.746956] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 8642.748039] Modules linked in: [...] [ 8642.752929] CPU: 1 PID: 1225 Comm: rmmod Not tainted 3.18.0-rc2+ #49 [ 8642.754203] Hardware name: Supermicro X10SLM-F/X10SLM-F, BIOS 1.1b 11/01/2013 [ 8642.755505] task: ffff8807e34d3fe0 ti: ffff8807b7204000 task.ti: ffff8807b7204000 [ 8642.756831] RIP: 0010:[] [] ixgbe_remove+0xfc/0x1b0 [ixgbe] [...] [ 8642.774335] Stack: [ 8642.775805] ffff8807ee824098 ffff8807ee824098 ffffffffa01f3000 ffff8807ee824000 [ 8642.777326] ffff8807b7207e18 ffffffff8137720f ffff8807ee824098 ffff8807ee824098 [ 8642.778848] ffffffffa01f3068 ffff8807ee8240f8 ffff8807b7207e38 ffffffff8144180f [ 8642.780365] Call Trace: [ 8642.781869] [] pci_device_remove+0x3f/0xc0 [ 8642.783395] [] __device_release_driver+0x7f/0xf0 [ 8642.784876] [] driver_detach+0xb8/0xc0 [ 8642.786352] [] bus_remove_driver+0x59/0xe0 [ 8642.787783] [] driver_unregister+0x30/0x70 [ 8642.789202] [] pci_unregister_driver+0x25/0xa0 [ 8642.790657] [] ixgbe_exit_module+0x1c/0xc8e [ixgbe] [ 8642.792064] [] SyS_delete_module+0x132/0x1c0 [ 8642.793450] [] ? do_notify_resume+0x61/0xa0 [ 8642.794837] [] system_call_fastpath+0x12/0x17 The issue is that test_and_set_bit() done on adapter->state is being performed *after* the netdevice has been freed via free_netdev(). When netdev is being allocated on initialization time, it allocates a private area, here struct ixgbe_adapter, that resides after the net_device structure. In ixgbe_probe(), the device init routine, we set up the adapter after alloc_etherdev_mq() on the private area and add a reference for the pci_dev as well via pci_set_drvdata(). Both in the error path of ixgbe_probe(), but also on module unload when ixgbe_remove() is being called, commit 41c62843eb6a ("ixgbe: Fix rcu warnings induced by LER") accesses adapter after free_netdev(). The patch stores the result in a bool and thus fixes above oops on my side. Fixes: 41c62843eb6a ("ixgbe: Fix rcu warnings induced by LER") Cc: stable Cc: Mark Rustad Signed-off-by: Daniel Borkmann Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 7acde46df192..82ffe8bdb898 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7979,6 +7979,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int i, err, pci_using_dac, expected_gts; unsigned int indices = MAX_TX_QUEUES; u8 part_str[IXGBE_PBANUM_LENGTH]; + bool disable_dev = false; #ifdef IXGBE_FCOE u16 device_caps; #endif @@ -8369,13 +8370,14 @@ err_sw_init: iounmap(adapter->io_addr); kfree(adapter->mac_table); err_ioremap: + disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: - if (!adapter || !test_and_set_bit(__IXGBE_DISABLED, &adapter->state)) + if (!adapter || disable_dev) pci_disable_device(pdev); return err; } @@ -8393,6 +8395,7 @@ static void ixgbe_remove(struct pci_dev *pdev) { struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); struct net_device *netdev = adapter->netdev; + bool disable_dev; ixgbe_dbg_adapter_exit(adapter); @@ -8442,11 +8445,12 @@ static void ixgbe_remove(struct pci_dev *pdev) e_dev_info("complete\n"); kfree(adapter->mac_table); + disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); free_netdev(netdev); pci_disable_pcie_error_reporting(pdev); - if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state)) + if (disable_dev) pci_disable_device(pdev); } -- cgit v1.2.3 From 17a402a0075c7848d940eb846f8db1da6a832c5d Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 21 Nov 2014 23:52:54 -0800 Subject: igb: Fixes needed for surprise removal support This patch adds some checks in order to prevent panic's on surprise removal of devices during S0, S3, S4. Without this patch, Thunderbolt type device removal will panic the system. Signed-off-by: Yanir Lubetkin Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_main.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a2d72a87cbde..487cd9c4ac0d 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1012,7 +1012,8 @@ static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) /* igb_get_stats64() might access the rings on this vector, * we must wait a grace period before freeing it. */ - kfree_rcu(q_vector, rcu); + if (q_vector) + kfree_rcu(q_vector, rcu); } /** @@ -1792,8 +1793,10 @@ void igb_down(struct igb_adapter *adapter) adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; for (i = 0; i < adapter->num_q_vectors; i++) { - napi_synchronize(&(adapter->q_vector[i]->napi)); - napi_disable(&(adapter->q_vector[i]->napi)); + if (adapter->q_vector[i]) { + napi_synchronize(&adapter->q_vector[i]->napi); + napi_disable(&adapter->q_vector[i]->napi); + } } @@ -3717,7 +3720,8 @@ static void igb_free_all_tx_resources(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_tx_queues; i++) - igb_free_tx_resources(adapter->tx_ring[i]); + if (adapter->tx_ring[i]) + igb_free_tx_resources(adapter->tx_ring[i]); } void igb_unmap_and_free_tx_resource(struct igb_ring *ring, @@ -3782,7 +3786,8 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_tx_queues; i++) - igb_clean_tx_ring(adapter->tx_ring[i]); + if (adapter->tx_ring[i]) + igb_clean_tx_ring(adapter->tx_ring[i]); } /** @@ -3819,7 +3824,8 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_rx_queues; i++) - igb_free_rx_resources(adapter->rx_ring[i]); + if (adapter->rx_ring[i]) + igb_free_rx_resources(adapter->rx_ring[i]); } /** @@ -3874,7 +3880,8 @@ static void igb_clean_all_rx_rings(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_rx_queues; i++) - igb_clean_rx_ring(adapter->rx_ring[i]); + if (adapter->rx_ring[i]) + igb_clean_rx_ring(adapter->rx_ring[i]); } /** @@ -7404,6 +7411,8 @@ static int igb_resume(struct device *dev) pci_restore_state(pdev); pci_save_state(pdev); + if (!pci_device_is_present(pdev)) + return -ENODEV; err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, -- cgit v1.2.3 From 73112f9b08ddb32c5cdaccda61bd88dfe9baf8b2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 22 Nov 2014 15:39:17 +0100 Subject: solos-pci: fix error return code Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/atm/solos-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 7652e8dc188f..21b0bc6a9c96 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -1225,11 +1225,13 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE); if (!card->config_regs) { dev_warn(&dev->dev, "Failed to ioremap config registers\n"); + err = -ENOMEM; goto out_release_regions; } card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE); if (!card->buffers) { dev_warn(&dev->dev, "Failed to ioremap data buffers\n"); + err = -ENOMEM; goto out_unmap_config; } -- cgit v1.2.3 From 5ac6c72e594471acfa5b00210c51d533a73413ad Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 21 Oct 2014 16:12:18 +0300 Subject: iwlwifi: mvm: check TLV flag before trying to use hotspot firmware commands Older firmwares do not provide support for the HOT_SPOT_CMD command. Check for the appropriate TLV flag that declares hotspot support in the firmware to prevent a firmware assertion failure that can be triggered from the userspace, Cc: stable@vger.kernel.org [3.17+] Signed-off-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fw.h | 2 ++ drivers/net/wireless/iwlwifi/mvm/mac80211.c | 12 +++++++++--- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 4f6e66892acc..b894a84e8393 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -155,6 +155,7 @@ enum iwl_ucode_tlv_api { * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), * which also implies support for the scheduler configuration command + * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command */ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0), @@ -163,6 +164,7 @@ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10), IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11), IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12), + IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18), }; /* The default calibrate table size if not specified by firmware file */ diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index b62405865b25..b6d2683da3a9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -2448,9 +2448,15 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: - /* Use aux roc framework (HS20) */ - ret = iwl_mvm_send_aux_roc_cmd(mvm, channel, - vif, duration); + if (mvm->fw->ucode_capa.capa[0] & + IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT) { + /* Use aux roc framework (HS20) */ + ret = iwl_mvm_send_aux_roc_cmd(mvm, channel, + vif, duration); + goto out_unlock; + } + IWL_ERR(mvm, "hotspot not supported\n"); + ret = -EINVAL; goto out_unlock; case NL80211_IFTYPE_P2P_DEVICE: /* handle below */ -- cgit v1.2.3 From f144d1496b47e7450f41b767d0d91c724c2198bc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 3 Oct 2014 15:13:24 +1000 Subject: PCI/MSI: Add device flag indicating that 64-bit MSIs don't work This can be set by quirks/drivers to be used by the architecture code that assigns the MSI addresses. We additionally add verification in the core MSI code that the values assigned by the architecture do satisfy the limitation in order to fail gracefully if they don't (ie. the arch hasn't been updated to deal with that quirk yet). Signed-off-by: Benjamin Herrenschmidt CC: Acked-by: Bjorn Helgaas --- drivers/pci/msi.c | 26 ++++++++++++++++++++++++++ include/linux/pci.h | 1 + 2 files changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 9fab30af0e75..084587d7cd13 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -590,6 +590,20 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev) return entry; } +static int msi_verify_entries(struct pci_dev *dev) +{ + struct msi_desc *entry; + + list_for_each_entry(entry, &dev->msi_list, list) { + if (!dev->no_64bit_msi || !entry->msg.address_hi) + continue; + dev_err(&dev->dev, "Device has broken 64-bit MSI but arch" + " tried to assign one above 4G\n"); + return -EIO; + } + return 0; +} + /** * msi_capability_init - configure device's MSI capability structure * @dev: pointer to the pci_dev data structure of MSI device function @@ -627,6 +641,13 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) return ret; } + ret = msi_verify_entries(dev); + if (ret) { + msi_mask_irq(entry, mask, ~mask); + free_msi_irqs(dev); + return ret; + } + ret = populate_msi_sysfs(dev); if (ret) { msi_mask_irq(entry, mask, ~mask); @@ -739,6 +760,11 @@ static int msix_capability_init(struct pci_dev *dev, if (ret) goto out_avail; + /* Check if all MSI entries honor device restrictions */ + ret = msi_verify_entries(dev); + if (ret) + goto out_free; + /* * Some devices require MSI-X to be enabled before we can touch the * MSI-X registers. We need to mask all the vectors to prevent diff --git a/include/linux/pci.h b/include/linux/pci.h index 5be8db45e368..4c8ac5fcc224 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -331,6 +331,7 @@ struct pci_dev { unsigned int is_added:1; unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int no_64bit_msi:1; /* device may only use 32-bit MSIs */ unsigned int block_cfg_access:1; /* config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int irq_reroute_variant:2; /* device needs IRQ rerouting variant */ -- cgit v1.2.3 From 91ed6fd2c383bb8f02d66e98b4a4d2f7207249dc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 3 Oct 2014 15:18:59 +1000 Subject: gpu/radeon: Set flag to indicate broken 64-bit MSI Some radeon ASICs don't support all 64 address bits of MSIs despite advertising support for 64-bit MSIs in their configuration space. This breaks on systems such as IBM POWER7/8, where 64-bit MSIs can be assigned with some of the high address bits set. This makes use of the newly introduced "no_64bit_msi" flag in structure pci_dev to allow the MSI allocation code to fallback to 32-bit MSIs on those adapters. Signed-off-by: Benjamin Herrenschmidt Reviewed-by: Alex Deucher CC: --- Adding Alex's review tag. Patch to the driver is identical to the reviewed one, I dropped the arch/powerpc hunk rewrote the subject and cset comment. --- drivers/gpu/drm/radeon/radeon_irq_kms.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 7784911d78ef..00fc59762e0d 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -185,6 +185,16 @@ static bool radeon_msi_ok(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_AGP) return false; + /* + * Older chips have a HW limitation, they can only generate 40 bits + * of address for "64-bit" MSIs which breaks on some platforms, notably + * IBM POWER servers, so we limit them + */ + if (rdev->family < CHIP_BONAIRE) { + dev_info(rdev->dev, "radeon: MSI limited to 32-bit\n"); + rdev->pdev->no_64bit_msi = 1; + } + /* force MSI on */ if (radeon_msi == 1) return true; -- cgit v1.2.3 From bdfa7542d40e6251c232a802231b37116bd31b11 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 27 May 2014 21:33:09 +0300 Subject: drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During a GPU reset we need to get pending page flip cleared out since the ring contents are gone and flip will never complete on its own. This used to work until the mmio vs. CS flip race detection came about. That piece of code is looking for a specific surface address in the SURFLIVE register, but as a flip to that address may never happen the check may never pass. So we should just skip the SURFLIVE and flip counter checks when the GPU gets reset. intel_display_handle_reset() tries to effectively complete the flip anyway by calling .update_primary_plane(). But that may not satisfy the conditions of the mmio vs. CS race detection since there's no guarantee that a modeset didn't sneak in between the GPU reset and intel_display_handle_reset(). Such a modeset will not wait for pending flips due to the ongoing GPU reset, and then the primary plane updates performed by intel_display_handle_reset() will already use the new surface address, and thus the surface address the flip is waiting for might never appear in SURFLIVE. The result is that the flip will never complete and attempts to perform further page flips will fail with -EBUSY. During the GPU reset intel_crtc_has_pending_flip() will return false regardless, so the deadlock with a modeset vs. the error work acquiring crtc->mutex was avoided. And the reset_counter check in intel_crtc_has_pending_flip() actually made this bug even less severe since it allowed normal modesets to go through even though there's a pending flip. This is a regression introduced by me here: commit 75f7f3ec600524c9544cc31695155f1a9ddbe1d9 Author: Ville Syrjälä Date: Tue Apr 15 21:41:34 2014 +0300 drm/i915: Fix mmio vs. CS flip race on ILK+ Testcase: igt/kms_flip/flip-vs-panning-vs-hang Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f0a1a56406eb..8bcdb981d540 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9408,6 +9408,10 @@ static bool page_flip_finished(struct intel_crtc *crtc) struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + if (i915_reset_in_progress(&dev_priv->gpu_error) || + crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter)) + return true; + /* * The relevant registers doen't exist on pre-ctg. * As the flip done interrupt doesn't trigger for mmio -- cgit v1.2.3 From 2dd34339ac6305c4f2f4e589b858212e339d31e9 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Mon, 24 Nov 2014 13:58:00 +0300 Subject: xen-netback: do not report success if backend_create_xenvif() fails If xenvif_alloc() or xenbus_scanf() fail in backend_create_xenvif(), xenbus is left in offline mode but netback_probe() reports success. The patch implements propagation of error code for backend_create_xenvif(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index 4e56a27f9689..fab0d4b42f58 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -39,7 +39,7 @@ struct backend_info { static int connect_rings(struct backend_info *be, struct xenvif_queue *queue); static void connect(struct backend_info *be); static int read_xenbus_vif_flags(struct backend_info *be); -static void backend_create_xenvif(struct backend_info *be); +static int backend_create_xenvif(struct backend_info *be); static void unregister_hotplug_status_watch(struct backend_info *be); static void set_backend_state(struct backend_info *be, enum xenbus_state state); @@ -352,7 +352,9 @@ static int netback_probe(struct xenbus_device *dev, be->state = XenbusStateInitWait; /* This kicks hotplug scripts, so do it immediately. */ - backend_create_xenvif(be); + err = backend_create_xenvif(be); + if (err) + goto fail; return 0; @@ -397,19 +399,19 @@ static int netback_uevent(struct xenbus_device *xdev, } -static void backend_create_xenvif(struct backend_info *be) +static int backend_create_xenvif(struct backend_info *be) { int err; long handle; struct xenbus_device *dev = be->dev; if (be->vif != NULL) - return; + return 0; err = xenbus_scanf(XBT_NIL, dev->nodename, "handle", "%li", &handle); if (err != 1) { xenbus_dev_fatal(dev, err, "reading handle"); - return; + return (err < 0) ? err : -EINVAL; } be->vif = xenvif_alloc(&dev->dev, dev->otherend_id, handle); @@ -417,10 +419,11 @@ static void backend_create_xenvif(struct backend_info *be) err = PTR_ERR(be->vif); be->vif = NULL; xenbus_dev_fatal(dev, err, "creating interface"); - return; + return err; } kobject_uevent(&dev->dev.kobj, KOBJ_ONLINE); + return 0; } static void backend_disconnect(struct backend_info *be) -- cgit v1.2.3 From 263e80b43559a6103e178a9176938ce171b23872 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Nov 2014 11:22:38 +0100 Subject: usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 This wireless mouse receiver needs a reset-resume quirk to properly come out of reset. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206 Signed-off-by: Hans de Goede Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 39b4081b632d..96fafed92b76 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Wireless Laser Mouse 6000 Receiver */ + { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From d0ab54783f2de0c216115333eca1a8d3d5c3e75b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Nov 2014 23:33:07 -0800 Subject: Input: elantech - trust firmware about trackpoint presence Only try to parse data as coming from trackpoint if firmware told us that trackpoint is present. Fixes commit caeb0d37fa3e387eb0dd22e5d497523c002033d1 Reported-and-tested-by: Marcus Overhagen Reported-and-tested-by: Anders Kaseorg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 3fcb6b3cb0bd..f2b978026407 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -428,14 +428,6 @@ static void elantech_report_trackpoint(struct psmouse *psmouse, int x, y; u32 t; - if (dev_WARN_ONCE(&psmouse->ps2dev.serio->dev, - !tp_dev, - psmouse_fmt("Unexpected trackpoint message\n"))) { - if (etd->debug == 1) - elantech_packet_dump(psmouse); - return; - } - t = get_unaligned_le32(&packet[0]); switch (t & ~7U) { @@ -793,7 +785,7 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) unsigned char packet_type = packet[3] & 0x03; bool sanity_check; - if ((packet[3] & 0x0f) == 0x06) + if (etd->tp_dev && (packet[3] & 0x0f) == 0x06) return PACKET_TRACKPOINT; /* -- cgit v1.2.3 From a1f9a4072655843fc03186acbad65990cc05dd2d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Nov 2014 00:38:17 -0800 Subject: Input: xpad - use proper endpoint type The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by: "Pierre-Loup A. Griffais" Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 2ed7905a068f..fc55f0d15b70 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1179,9 +1179,19 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id } ep_irq_in = &intf->cur_altsetting->endpoint[1].desc; - usb_fill_bulk_urb(xpad->bulk_out, udev, - usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress), - xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad); + if (usb_endpoint_is_bulk_out(ep_irq_in)) { + usb_fill_bulk_urb(xpad->bulk_out, udev, + usb_sndbulkpipe(udev, + ep_irq_in->bEndpointAddress), + xpad->bdata, XPAD_PKT_LEN, + xpad_bulk_out, xpad); + } else { + usb_fill_int_urb(xpad->bulk_out, udev, + usb_sndintpipe(udev, + ep_irq_in->bEndpointAddress), + xpad->bdata, XPAD_PKT_LEN, + xpad_bulk_out, xpad, 0); + } /* * Submit the int URB immediately rather than waiting for open -- cgit v1.2.3 From 3dc2b6a8d38cf6c7604ec25f3d50d6ec8da04435 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 24 Nov 2014 20:08:38 -0800 Subject: vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX] In "vxlan: Call udp_sock_create" there was a logic error that resulted in the default for IPv6 VXLAN tunnels going from using checksums to not using checksums. Since there is currently no support in iproute2 for setting these values it means that a kernel after the change cannot talk over a IPv6 VXLAN tunnel to a kernel prior the change. Fixes: 3ee64f3 ("vxlan: Call udp_sock_create") Cc: Tom Herbert Signed-off-by: Alexander Duyck Acked-by: Tom Herbert Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index e1e335c339e3..be4649a49c5e 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2306,9 +2306,9 @@ static struct socket *vxlan_create_sock(struct net *net, bool ipv6, if (ipv6) { udp_conf.family = AF_INET6; udp_conf.use_udp6_tx_checksums = - !!(flags & VXLAN_F_UDP_ZERO_CSUM6_TX); + !(flags & VXLAN_F_UDP_ZERO_CSUM6_TX); udp_conf.use_udp6_rx_checksums = - !!(flags & VXLAN_F_UDP_ZERO_CSUM6_RX); + !(flags & VXLAN_F_UDP_ZERO_CSUM6_RX); } else { udp_conf.family = AF_INET; udp_conf.local_ip.s_addr = INADDR_ANY; -- cgit v1.2.3 From a91ed1901a80b401afa1b718d941d3450d868151 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 25 Nov 2014 10:32:06 -0600 Subject: rtlwifi: rtl8821ae: Fix 5G detection problem The changes associated with moving this driver from staging to the regular tree missed one section setting the allowable rates for the 5GHz band. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini Tested-by: Valerio Passini Signed-off-by: Larry Finger Cc: Valerio Passini Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c index 310d3163dc5b..8ec8200002c7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c @@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw, mac->opmode == NL80211_IFTYPE_ADHOC) macid = sta->aid + 1; if (wirelessmode == WIRELESS_MODE_N_5G || - wirelessmode == WIRELESS_MODE_AC_5G) - ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ]; + wirelessmode == WIRELESS_MODE_AC_5G || + wirelessmode == WIRELESS_MODE_A) + ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4; else ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; -- cgit v1.2.3 From 7d63a5f9b25ba6b130da8eb2d32a72b1462d0249 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 25 Nov 2014 10:32:07 -0600 Subject: rtlwifi: Change order in device startup The existing order of steps when starting the PCI devices works for 2.4G devices, but fails to initialize the 5G section of the RTL8821AE hardware. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini Tested-by: Valerio Passini Signed-off-by: Larry Finger Cc: Valerio Passini Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 61f5d36eca6a..846a2e6e34d8 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -2249,6 +2249,16 @@ int rtl_pci_probe(struct pci_dev *pdev, /*like read eeprom and so on */ rtlpriv->cfg->ops->read_eeprom_info(hw); + if (rtlpriv->cfg->ops->init_sw_vars(hw)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n"); + err = -ENODEV; + goto fail3; + } + rtlpriv->cfg->ops->init_sw_leds(hw); + + /*aspm */ + rtl_pci_init_aspm(hw); + /* Init mac80211 sw */ err = rtl_init_core(hw); if (err) { @@ -2264,16 +2274,6 @@ int rtl_pci_probe(struct pci_dev *pdev, goto fail3; } - if (rtlpriv->cfg->ops->init_sw_vars(hw)) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n"); - err = -ENODEV; - goto fail3; - } - rtlpriv->cfg->ops->init_sw_leds(hw); - - /*aspm */ - rtl_pci_init_aspm(hw); - err = ieee80211_register_hw(hw); if (err) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, -- cgit v1.2.3 From a620a6bc1c94c22d6c312892be1e0ae171523125 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 25 Nov 2014 14:21:11 -0200 Subject: tg3: fix ring init when there are more TX than RX channels If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index dbb41c1923e6..77f8f836cbbe 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -8563,7 +8563,8 @@ static int tg3_init_rings(struct tg3 *tp) if (tnapi->rx_rcb) memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp)); - if (tg3_rx_prodring_alloc(tp, &tnapi->prodring)) { + if (tnapi->prodring.rx_std && + tg3_rx_prodring_alloc(tp, &tnapi->prodring)) { tg3_free_rings(tp); return -ENOMEM; } -- cgit v1.2.3 From a5e9ab291c608c62691b9d565104a30d931998bf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Nov 2014 12:46:39 -0800 Subject: Revert "serial: of-serial: add PM suspend/resume support" This reverts commit 2dea53bf57783f243c892e99c10c6921e956aa7e. Turns out to be broken :( Cc: Jingchang Lu Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/of_serial.c | 27 --------------------------- 1 file changed, 27 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 56982da4a9e9..bf355050eab6 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -240,32 +240,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int of_serial_suspend(struct device *dev) -{ - struct of_serial_info *info = dev_get_drvdata(dev); - - serial8250_suspend_port(info->line); - if (info->clk) - clk_disable_unprepare(info->clk); - - return 0; -} - -static int of_serial_resume(struct device *dev) -{ - struct of_serial_info *info = dev_get_drvdata(dev); - - if (info->clk) - clk_prepare_enable(info->clk); - - serial8250_resume_port(info->line); - - return 0; -} -#endif -static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume); - /* * A few common types, add more as needed. */ @@ -297,7 +271,6 @@ static struct platform_driver of_platform_serial_driver = { .name = "of_serial", .owner = THIS_MODULE, .of_match_table = of_platform_serial_table, - .pm = &of_serial_pm_ops, }, .probe = of_platform_serial_probe, .remove = of_platform_serial_remove, -- cgit v1.2.3 From 714710e1a2f6528be83d0f1c6cdf1e79a676d234 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 14 Nov 2014 14:16:14 -0800 Subject: irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov Acked-by: Florian Fainelli Tested-by: Kevin Cernekee Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws Signed-off-by: Jason Cooper --- drivers/irqchip/irq-bcm7120-l2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c index b9f4fb808e49..5fb38a2ac226 100644 --- a/drivers/irqchip/irq-bcm7120-l2.c +++ b/drivers/irqchip/irq-bcm7120-l2.c @@ -101,9 +101,9 @@ static int bcm7120_l2_intc_init_one(struct device_node *dn, int parent_irq; parent_irq = irq_of_parse_and_map(dn, irq); - if (parent_irq < 0) { + if (!parent_irq) { pr_err("failed to map interrupt %d\n", irq); - return parent_irq; + return -EINVAL; } data->irq_map_mask |= be32_to_cpup(map_mask + irq); -- cgit v1.2.3 From d99ba4465a08138966083d6c256b2f66e85a5095 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 14 Nov 2014 14:16:42 -0800 Subject: irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov Acked-by: Florian Fainelli Tested-by: Kevin Cernekee Link: https://lkml.kernel.org/r/20141114221642.GA37468@dtor-ws Signed-off-by: Jason Cooper --- drivers/irqchip/irq-brcmstb-l2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c index c15c840987d2..14691a4cb84c 100644 --- a/drivers/irqchip/irq-brcmstb-l2.c +++ b/drivers/irqchip/irq-brcmstb-l2.c @@ -135,9 +135,9 @@ int __init brcmstb_l2_intc_of_init(struct device_node *np, __raw_writel(0xffffffff, data->base + CPU_CLEAR); data->parent_irq = irq_of_parse_and_map(np, 0); - if (data->parent_irq < 0) { + if (!data->parent_irq) { pr_err("failed to find parent interrupt\n"); - ret = data->parent_irq; + ret = -EINVAL; goto out_unmap; } -- cgit v1.2.3 From 97cd6805acf0d6b1b06b439cbc8c25586d73dcfc Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 24 Nov 2014 14:24:18 +0900 Subject: ufs: ensure clk gating work is finished before module unloading When dynamic clk gating feature is enabled, delayed workqueue machanism is used in order to detect certain period of inactivity. But there is no guarantee that scheduled gating work is completed before module unloading. So it can cause kernel crash by accessing memory after it was freed. Fix it by cancelling clk gating and ungating works and ensure that its execution is finished before module unloading. Signed-off-by: Akinobu Mita Reviewed-by: Subhash Jadavani Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index b9da4463cefb..61bf002c7bd1 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -744,6 +744,8 @@ static void ufshcd_exit_clk_gating(struct ufs_hba *hba) if (!ufshcd_is_clkgating_allowed(hba)) return; device_remove_file(hba->dev, &hba->clk_gating.delay_attr); + cancel_work_sync(&hba->clk_gating.ungate_work); + cancel_delayed_work_sync(&hba->clk_gating.gate_work); } /* Must be called with host lock acquired */ -- cgit v1.2.3 From 3e660fbef96f53d01ba022b1b75b72759a02983e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 18 Nov 2014 23:02:46 +0900 Subject: ufs: fix NULL dereference when no regulators are defined If no voltage supply regulators are defined for the UFS devices (assumed they are always-on), ufshcd_config_vreg_load() can be called on suspend/resume paths with vreg == NULL as hba->vreg_info.vcc* equal to NULL, and it causes NULL pointer dereference. This fixes it by making ufshcd_config_vreg_{h,l}pm noop when no regulators are defined. Signed-off-by: Akinobu Mita Reviewed-by: Subhash Jadavani Signed-off-by: Christoph Hellwig --- drivers/scsi/ufs/ufshcd.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 61bf002c7bd1..605ca60e8a10 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4268,12 +4268,18 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, struct ufs_vreg *vreg) { + if (!vreg) + return 0; + return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); } static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, struct ufs_vreg *vreg) { + if (!vreg) + return 0; + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); } -- cgit v1.2.3 From afa4e53a7bcd4328d88e25c7a63746b65dc6bbe2 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 25 Nov 2014 15:43:48 +0200 Subject: drm/i915: Cancel vdd off work before suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we just make sure vdd is off before suspending, but we don't cancel the vdd off work. The work wil not touch vdd if want_panel_vdd==false so in theory this is fine. In the past that was perfectly fine since the vdd off work didn't do anything when want_panel_vdd==false, so even if the work would have been run during system resume before i915 has resumed, nothing would happen. However since pps_lock() will now grab the power domain references before it can check want_panel_vdd, we may end up toggling the power wells on/off already before the driver has resumed. That is not really acceptable, so cancel the vdd off work when suspending the encoder. The problem appeared when pps_lock() was introduced in: commit 773538e86081d146e0020435d614f4b96996c1f9 Author: Ville Syrjälä Date: Thu Sep 4 14:54:56 2014 +0300 drm/i915: Reset power sequencer pipe tracking when disp2d is off Signed-off-by: Ville Syrjälä Reviewed-by: Imre Deak Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5ad45bfff3fe..4bcd91757321 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4450,6 +4450,7 @@ static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) * vdd might still be enabled do to the delayed vdd off. * Make sure vdd is actually turned off here. */ + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); pps_lock(intel_dp); edp_panel_vdd_off_sync(intel_dp); pps_unlock(intel_dp); -- cgit v1.2.3 From a566059d89139c3c3ce21b0c7cb37886b2549b78 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 25 Nov 2014 18:08:48 -0800 Subject: net: dsa: bcm_sf2: fix unmapping registers in case of errors In case we fail to ioremap() one of our registers, we would be leaking existing mappings, unwind those accordingly on errors. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index b9625968daac..46632e8b6336 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -404,7 +404,8 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) *base = of_iomap(dn, i); if (*base == NULL) { pr_err("unable to find register: %s\n", reg_names[i]); - return -ENODEV; + ret = -ENOMEM; + goto out_unmap; } base++; } @@ -484,7 +485,8 @@ out_free_irq0: out_unmap: base = &priv->core; for (i = 0; i < BCM_SF2_REGS_NUM; i++) { - iounmap(*base); + if (*base) + iounmap(*base); base++; } return ret; -- cgit v1.2.3 From 33f846142919f0ecceb9fde99fecdbc307dbf541 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 25 Nov 2014 18:08:49 -0800 Subject: net: dsa: bcm_sf2: reset switch prior to initialization Our boot agent may have left the switch in an certain configuration state, make sure we issue a software reset prior to configuring the switch in order to ensure the HW is in a consistent state, in particular transmit queues and internal buffers. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 52 ++++++++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 46632e8b6336..4f4c2a7888e5 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -377,6 +377,29 @@ static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id) return IRQ_HANDLED; } +static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) +{ + unsigned int timeout = 1000; + u32 reg; + + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET; + core_writel(priv, reg, CORE_WATCHDOG_CTRL); + + do { + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + if (!(reg & SOFTWARE_RESET)) + break; + + usleep_range(1000, 2000); + } while (timeout-- > 0); + + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} + static int bcm_sf2_sw_setup(struct dsa_switch *ds) { const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME; @@ -410,6 +433,12 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) base++; } + ret = bcm_sf2_sw_rst(priv); + if (ret) { + pr_err("unable to software reset switch: %d\n", ret); + goto out_unmap; + } + /* Disable all interrupts and request them */ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); @@ -735,29 +764,6 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) return 0; } -static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) -{ - unsigned int timeout = 1000; - u32 reg; - - reg = core_readl(priv, CORE_WATCHDOG_CTRL); - reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET; - core_writel(priv, reg, CORE_WATCHDOG_CTRL); - - do { - reg = core_readl(priv, CORE_WATCHDOG_CTRL); - if (!(reg & SOFTWARE_RESET)) - break; - - usleep_range(1000, 2000); - } while (timeout-- > 0); - - if (timeout == 0) - return -ETIMEDOUT; - - return 0; -} - static int bcm_sf2_sw_resume(struct dsa_switch *ds) { struct bcm_sf2_priv *priv = ds_to_priv(ds); -- cgit v1.2.3 From 2d5c57d7fbfaa642fb7f0673df24f32b83d9066c Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 25 Nov 2014 11:54:31 +0200 Subject: net/mlx4_core: Limit count field to 24 bits in qp_alloc_res Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0a8 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 5d2498dcf536..cd5cf6d957c7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -1546,7 +1546,7 @@ static int qp_alloc_res(struct mlx4_dev *dev, int slave, int op, int cmd, switch (op) { case RES_OP_RESERVE: - count = get_param_l(&in_param); + count = get_param_l(&in_param) & 0xffffff; align = get_param_h(&in_param); err = mlx4_grant_resource(dev, slave, RES_QP, count, 0); if (err) -- cgit v1.2.3 From 571dcfde23712b92e45a126f415d9424af0c2886 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Wed, 26 Nov 2014 10:38:06 +0800 Subject: stmmac: platform: fix default values of the filter bins setting The commit 3b57de958e2a brought the support for a different amount of the filter bins, but didn't update the platform driver that without CONFIG_OF. Fixes: 3b57de958e2a (net: stmmac: Support devicetree configs for mcast and ucast filter entries) Signed-off-by: Huacai Chen Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index db56fa7ce8f9..5b0da3986216 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -177,12 +177,6 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, */ plat->maxmtu = JUMBO_LEN; - /* Set default value for multicast hash bins */ - plat->multicast_filter_bins = HASH_TABLE_SIZE; - - /* Set default value for unicast filter entries */ - plat->unicast_filter_entries = 1; - /* * Currently only the properties needed on SPEAr600 * are provided. All other properties should be added @@ -270,6 +264,13 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) return PTR_ERR(addr); plat_dat = dev_get_platdata(&pdev->dev); + + /* Set default value for multicast hash bins */ + plat_dat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat_dat->unicast_filter_entries = 1; + if (pdev->dev.of_node) { if (!plat_dat) plat_dat = devm_kzalloc(&pdev->dev, -- cgit v1.2.3 From b7c1a314112785c319b2ba2dc8e73497714e42a1 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 26 Nov 2014 13:42:17 +0100 Subject: net: Validate IFLA_BRIDGE_MODE attribute length Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: a77dcb8c8 ("be2net: set and query VEB/VEPA mode of the PF interface") Fixes: 815cccbf1 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") Cc: Ajit Khaparde Cc: John Fastabend Signed-off-by: Thomas Graf Acked-by: Jeff Kirsher Acked-by: John Fastabend Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 3 +++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 3e8475cae4f9..337e4cd70a13 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4314,6 +4314,9 @@ static int be_ndo_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh) if (nla_type(attr) != IFLA_BRIDGE_MODE) continue; + if (nla_len(attr) < sizeof(mode)) + return -EINVAL; + mode = nla_get_u16(attr); if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB) return -EINVAL; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 82ffe8bdb898..dff9905331ba 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7677,6 +7677,9 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev, if (nla_type(attr) != IFLA_BRIDGE_MODE) continue; + if (nla_len(attr) < sizeof(mode)) + return -EINVAL; + mode = nla_get_u16(attr); if (mode == BRIDGE_MODE_VEPA) { reg = 0; -- cgit v1.2.3 From 4ea85e831e290cd967d161c66d0a3cf8be39f1f6 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 26 Nov 2014 13:42:18 +0100 Subject: net: Check for presence of IFLA_AF_SPEC ndo_bridge_setlink() is currently only called on the slave if IFLA_AF_SPEC is set but this is a very fragile assumption and may change in the future. Cc: Ajit Khaparde Cc: John Fastabend Signed-off-by: Thomas Graf Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 337e4cd70a13..597c463e384d 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4309,6 +4309,8 @@ static int be_ndo_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh) return -EOPNOTSUPP; br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); + if (!br_spec) + return -EINVAL; nla_for_each_nested(attr, br_spec, rem) { if (nla_type(attr) != IFLA_BRIDGE_MODE) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index dff9905331ba..cc51554c9e99 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7669,6 +7669,8 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev, return -EOPNOTSUPP; br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); + if (!br_spec) + return -EINVAL; nla_for_each_nested(attr, br_spec, rem) { __u16 mode; -- cgit v1.2.3 From 33dc85c3c667209c930b2dac5ccbc2a365e06b7a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 12 Nov 2014 10:07:49 -0600 Subject: staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd In commit fadbe0cd5292851608e2e01b91d9295fa287b9fe entitled "staging: rtl8188eu:Remove rtw_zmalloc(), wrapper for kzalloc()", the author failed to note that the original code in the wrapper tested whether the caller could sleep, and set the flags argument to kzalloc() appropriately. After the patch, GFP_KERNEL is used unconditionally. Unfortunately, several of the routines may be entered from an interrupt routine and generate a BUG splat for every such call. Routine rtw_sitesurvey_cmd() is used in the example below: BUG: sleeping function called from invalid context at mm/slub.c:1240 in_atomic(): 1, irqs_disabled(): 0, pid: 756, name: wpa_supplicant INFO: lockdep is turned off. CPU: 2 PID: 756 Comm: wpa_supplicant Tainted: G WC O 3.18.0-rc4+ #34 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 ffffc90005557000 ffff880216fafaa8 ffffffff816b0bbf 0000000000000000 ffff8800c3b58000 ffff880216fafac8 ffffffff8107af77 0000000000000001 0000000000000010 ffff880216fafb18 ffffffff811b06ce 0000000000000000 Call Trace: [] dump_stack+0x4e/0x71 [] __might_sleep+0xf7/0x120 [] kmem_cache_alloc_trace+0x4e/0x1f0 [] ? rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [] rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [] rtw_do_join+0x22d/0x370 [r8188eu] [] rtw_set_802_11_ssid+0x218/0x3d0 [r8188eu] [] rtw_wx_set_essid+0x1e5/0x410 [r8188eu] [] ? rtw_wx_get_rate+0x50/0x50 [r8188eu] [] ioctl_standard_iw_point+0x151/0x3f0 [] ioctl_standard_call+0xb2/0xe0 [] ? rtnl_lock+0x17/0x20 [] ? iw_handler_get_private+0x70/0x70 [] ? call_commit_handler+0x40/0x40 [] wireless_process_ioctl+0x176/0x1c0 [] wext_handle_ioctl+0x69/0xc0 [] dev_ioctl+0x309/0x5e0 [] ? call_rcu+0x17/0x20 [] sock_ioctl+0x142/0x2e0 [] do_vfs_ioctl+0x300/0x520 [] ? __audit_syscall_entry+0xb4/0x110 [] ? __audit_syscall_entry+0xb4/0x110 [] ? do_audit_syscall_entry+0x6c/0x70 [] SyS_ioctl+0x81/0xa0 [] system_call_fastpath+0x12/0x17 Additional routines that generate this BUG are rtw_joinbss_cmd(), rtw_dynamic_chk_wk_cmd(), rtw_lps_ctrl_wk_cmd(), rtw_rpt_timer_cfg_cmd(), rtw_ps_cmd(), report_survey_event(), report_join_res(), survey_timer_hdl(), and rtw_check_bcn_info(). Signed-off-by: Larry Finger Cc: navin patidar Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/core/rtw_cmd.c | 22 +++++++++++----------- drivers/staging/rtl8188eu/core/rtw_mlme_ext.c | 12 ++++++------ drivers/staging/rtl8188eu/core/rtw_wlan_util.c | 2 +- 3 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c index 9935e66935af..eddef9cd2e16 100644 --- a/drivers/staging/rtl8188eu/core/rtw_cmd.c +++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c @@ -275,11 +275,11 @@ u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid, if (check_fwstate(pmlmepriv, _FW_LINKED) == true) rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SCAN, 1); - ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (ph2c == NULL) return _FAIL; - psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_KERNEL); + psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC); if (psurveyPara == NULL) { kfree(ph2c); return _FAIL; @@ -405,7 +405,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork) else RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+Join cmd: SSid =[%s]\n", pmlmepriv->assoc_ssid.Ssid)); - pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + pcmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (pcmd == NULL) { res = _FAIL; RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd: memory allocate for cmd_obj fail!!!\n")); @@ -755,13 +755,13 @@ u8 rtw_dynamic_chk_wk_cmd(struct adapter *padapter) u8 res = _SUCCESS; - ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (ph2c == NULL) { res = _FAIL; goto exit; } - pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL); + pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC); if (pdrvextra_cmd_parm == NULL) { kfree(ph2c); res = _FAIL; @@ -967,13 +967,13 @@ u8 rtw_lps_ctrl_wk_cmd(struct adapter *padapter, u8 lps_ctrl_type, u8 enqueue) u8 res = _SUCCESS; if (enqueue) { - ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (ph2c == NULL) { res = _FAIL; goto exit; } - pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL); + pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC); if (pdrvextra_cmd_parm == NULL) { kfree(ph2c); res = _FAIL; @@ -1010,13 +1010,13 @@ u8 rtw_rpt_timer_cfg_cmd(struct adapter *padapter, u16 min_time) u8 res = _SUCCESS; - ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (ph2c == NULL) { res = _FAIL; goto exit; } - pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL); + pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC); if (pdrvextra_cmd_parm == NULL) { kfree(ph2c); res = _FAIL; @@ -1088,13 +1088,13 @@ u8 rtw_ps_cmd(struct adapter *padapter) u8 res = _SUCCESS; - ppscmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + ppscmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (ppscmd == NULL) { res = _FAIL; goto exit; } - pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL); + pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC); if (pdrvextra_cmd_parm == NULL) { kfree(ppscmd); res = _FAIL; diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c index 5ba5099ec20d..70b1bc3e0e63 100644 --- a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c +++ b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c @@ -4241,12 +4241,12 @@ void report_survey_event(struct adapter *padapter, pcmdpriv = &padapter->cmdpriv; - pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (pcmd_obj == NULL) return; cmdsz = (sizeof(struct survey_event) + sizeof(struct C2HEvent_Header)); - pevtcmd = kzalloc(cmdsz, GFP_KERNEL); + pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); if (pevtcmd == NULL) { kfree(pcmd_obj); return; @@ -4339,12 +4339,12 @@ void report_join_res(struct adapter *padapter, int res) struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); struct cmd_priv *pcmdpriv = &padapter->cmdpriv; - pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (pcmd_obj == NULL) return; cmdsz = (sizeof(struct joinbss_event) + sizeof(struct C2HEvent_Header)); - pevtcmd = kzalloc(cmdsz, GFP_KERNEL); + pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); if (pevtcmd == NULL) { kfree(pcmd_obj); return; @@ -4854,11 +4854,11 @@ void survey_timer_hdl(void *function_context) pmlmeext->scan_abort = false;/* reset */ } - ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); + ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); if (ph2c == NULL) goto exit_survey_timer_hdl; - psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_KERNEL); + psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC); if (psurveyPara == NULL) { kfree(ph2c); goto exit_survey_timer_hdl; diff --git a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c index 33ccbbbd8ed6..d300369977fa 100644 --- a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c +++ b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c @@ -935,7 +935,7 @@ int rtw_check_bcn_info(struct adapter *Adapter, u8 *pframe, u32 packet_len) return true; } - bssid = kzalloc(sizeof(struct wlan_bssid_ex), GFP_KERNEL); + bssid = kzalloc(sizeof(struct wlan_bssid_ex), GFP_ATOMIC); subtype = GetFrameSubType(pframe) >> 4; -- cgit v1.2.3 From 1348579433566355e570008929daa09a0db64fd8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Nov 2014 12:08:34 -0500 Subject: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails If ddc fails, presumably the i2c mux (and hopefully the signal mux) are switched to the other GPU so don't fetch the edid from the vbios so that the connector reports disconnected. bug: https://bugzilla.opensuse.org/show_bug.cgi?id=904417 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_connectors.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 300c4b3d4669..26baa9c05f6c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -322,6 +322,12 @@ static void radeon_connector_get_edid(struct drm_connector *connector) } if (!radeon_connector->edid) { + /* don't fetch the edid from the vbios if ddc fails and runpm is + * enabled so we report disconnected. + */ + if ((rdev->flags & RADEON_IS_PX) && (radeon_runtime_pm != 0)) + return; + if (rdev->is_atom_bios) { /* some laptops provide a hardcoded edid in rom for LCDs */ if (((connector->connector_type == DRM_MODE_CONNECTOR_LVDS) || @@ -826,6 +832,8 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector, bool force) { + struct drm_device *dev = connector->dev; + struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); enum drm_connector_status ret = connector_status_disconnected; @@ -842,7 +850,11 @@ radeon_lvds_detect(struct drm_connector *connector, bool force) /* check if panel is valid */ if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240) ret = connector_status_connected; - + /* don't fetch the edid from the vbios if ddc fails and runpm is + * enabled so we report disconnected. + */ + if ((rdev->flags & RADEON_IS_PX) && (radeon_runtime_pm != 0)) + ret = connector_status_disconnected; } /* check for edid as well */ @@ -1589,6 +1601,11 @@ radeon_dp_detect(struct drm_connector *connector, bool force) /* check if panel is valid */ if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240) ret = connector_status_connected; + /* don't fetch the edid from the vbios if ddc fails and runpm is + * enabled so we report disconnected. + */ + if ((rdev->flags & RADEON_IS_PX) && (radeon_runtime_pm != 0)) + ret = connector_status_disconnected; } /* eDP is always DP */ radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT; -- cgit v1.2.3 From 6d4556fc0309608f760f1d329df56d77fdd0c31a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 27 Nov 2014 10:10:21 -0600 Subject: staging: r8188eu: Add new device ID for DLink GO-USB-N150 The DLink GO-USB-N150 with revision B1 uses this driver. Signed-off-by: Larry Finger Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index 407a318b09db..2f87150a21b7 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -47,6 +47,7 @@ static struct usb_device_id rtw_usb_id_tbl[] = { {USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */ {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */ {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */ + {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */ {USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */ {} /* Terminating entry */ }; -- cgit v1.2.3