From 90d5ede5985f3b172cc3ccd89bf8c52a209088a5 Mon Sep 17 00:00:00 2001 From: Stefan Schweizer Date: Mon, 15 May 2006 09:43:52 -0700 Subject: [PATCH] Fix capi reload by unregistering the correct major I am having the bug FATAL: Error inserting capi ([..]/capi.ko): Device or resource busy when I try to reload capi after loading it. in dmesg: capi20: unable to get major 68 Fix the issue which is caused by setting the major to zero when registering the chrdev succeeded. (akpm: this means that we can again not use `major=0' (dynamic major allocation) for this driver). Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/isdn/capi/capi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 9b493f0becc4..173c899a1fb4 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1499,7 +1499,6 @@ static int __init capi_init(void) printk(KERN_ERR "capi20: unable to get major %d\n", capi_major); return major_ret; } - capi_major = major_ret; capi_class = class_create(THIS_MODULE, "capi"); if (IS_ERR(capi_class)) { unregister_chrdev(capi_major, "capi20"); -- cgit v1.2.3 From 94585136606e0598a93ec145d9a899c8ec9b2208 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Mon, 15 May 2006 09:43:53 -0700 Subject: [PATCH] tpm: update module dependencies The TIS driver is dependent upon information from the ACPI table for device discovery thus it compiles but does no actual work without this dependency. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 1efde3b27619..fe00c7dfb649 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -22,7 +22,7 @@ config TCG_TPM config TCG_TIS tristate "TPM Interface Specification 1.2 Interface" - depends on TCG_TPM + depends on TCG_TPM && PNPACPI ---help--- If you have a TPM security chip that is compliant with the TCG TIS 1.2 TPM specification say Yes and it will be accessible -- cgit v1.2.3 From 73d58588091e81e5ee4266488e2fb09a410f1512 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 15 May 2006 09:43:53 -0700 Subject: [PATCH] pcmcia Oopses fixes Fix some NULL dereferences in the pcmcia code when using old userland tools. Signed-off-by: Benjamin Herrenschmidt Acked-by: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pcmcia/pcmcia_ioctl.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index c53db7ceda5e..738b1ef595a3 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -426,7 +426,7 @@ static int ds_open(struct inode *inode, struct file *file) if (!warning_printed) { printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl " - "usage.\n"); + "usage from process: %s.\n", current->comm); printk(KERN_INFO "pcmcia: This interface will soon be removed from " "the kernel; please expect breakage unless you upgrade " "to new tools.\n"); @@ -601,8 +601,12 @@ static int ds_ioctl(struct inode * inode, struct file * file, ret = CS_BAD_ARGS; else { struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function); - ret = pccard_get_configuration_info(s, p_dev, &buf->config); - pcmcia_put_dev(p_dev); + if (p_dev == NULL) + ret = CS_BAD_ARGS; + else { + ret = pccard_get_configuration_info(s, p_dev, &buf->config); + pcmcia_put_dev(p_dev); + } } break; case DS_GET_FIRST_TUPLE: @@ -632,8 +636,12 @@ static int ds_ioctl(struct inode * inode, struct file * file, ret = CS_BAD_ARGS; else { struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function); - ret = pccard_get_status(s, p_dev, &buf->status); - pcmcia_put_dev(p_dev); + if (p_dev == NULL) + ret = CS_BAD_ARGS; + else { + ret = pccard_get_status(s, p_dev, &buf->status); + pcmcia_put_dev(p_dev); + } } break; case DS_VALIDATE_CIS: @@ -665,9 +673,10 @@ static int ds_ioctl(struct inode * inode, struct file * file, if (!(buf->conf_reg.Function && (buf->conf_reg.Function >= s->functions))) { struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function); - if (p_dev) + if (p_dev) { ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg); - pcmcia_put_dev(p_dev); + pcmcia_put_dev(p_dev); + } } break; case DS_GET_FIRST_REGION: -- cgit v1.2.3 From a7b862f663d81858531dfccc0537bc9d8a2a4121 Mon Sep 17 00:00:00 2001 From: Chris Wedgwood Date: Mon, 15 May 2006 09:43:55 -0700 Subject: [PATCH] VIA quirk fixup, additional PCI IDs An earlier commit (75cf7456dd87335f574dcd53c4ae616a2ad71a11) changed an overly-zealous PCI quirk to only poke those VIA devices that need it. However, some PCI devices were not included in what I hope is now the full list. Consequently we're failing to run the quirk on all machines which need it, causing IRQ routing failures. This should I hope correct this. Thanks to Masoud Sharbiani for pointing this out and testing the fix. Signed-off-by: Chris Wedgwood Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 19e2b174d33c..0d36d5040880 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -634,6 +634,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vi * non-x86 architectures (yes Via exists on PPC among other places), * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get * interrupts delivered properly. + * + * Some of the on-chip devices are actually '586 devices' so they are + * listed here. */ static void quirk_via_irq(struct pci_dev *dev) { @@ -648,6 +651,10 @@ static void quirk_via_irq(struct pci_dev *dev) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); } } +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq); DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq); DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq); DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq); -- cgit v1.2.3 From 698d070746770aaaec78ab4ffa3ab1f1d5c6abe8 Mon Sep 17 00:00:00 2001 From: Greg Smith Date: Mon, 15 May 2006 09:44:02 -0700 Subject: [PATCH] s390: lcs incorrect test While debugging why our LCS emulator is having some problems I noticed the following weirdness in drivers/s390/net/lcs.c routine lcs_irq. The `if' statement is always true since SCHN_STAT_PCI is defined as 0x80. Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/net/lcs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 5d6b7a57b02f..e65da921a827 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -1348,7 +1348,7 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa) - channel->ccws; if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) || - (irb->scsw.cstat | SCHN_STAT_PCI)) + (irb->scsw.cstat & SCHN_STAT_PCI)) /* Bloody io subsystem tells us lies about cpa... */ index = (index - 1) & (LCS_NUM_BUFFS - 1); while (channel->io_idx != index) { -- cgit v1.2.3 From a8d2e7d95229db9999682113bfac40b49978f212 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 15 May 2006 09:44:14 -0700 Subject: [PATCH] LED: Improve Kconfig information Improve the NEW_LEDS Kconfig information to say what it does as well as what it doesn't. Signed-off-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/Kconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 3f5b64794542..626506234b76 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -4,8 +4,11 @@ menu "LED devices" config NEW_LEDS bool "LED Support" help - Say Y to enable Linux LED support. This is not related to standard - keyboard LEDs which are controlled via the input system. + Say Y to enable Linux LED support. This allows control of supported + LEDs from both userspace and optionally, by kernel events (triggers). + + This is not related to standard keyboard LEDs which are controlled + via the input system. config LEDS_CLASS tristate "LED Class Support" -- cgit v1.2.3 From 68673afd443c5eeb4cebfb9026e3675f43d79f2b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 15 May 2006 09:44:15 -0700 Subject: [PATCH] Backlight/LCD Class: Fix sysfs _store error handling The backlight and LCD class _store functions currently accept values like "34 some random strings" without error. This corrects them to return -EINVAL if the value is not numeric with an optional byte of trailing whitespace. Signed-off-by: Richard Purdie Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/backlight.c | 18 ++++++++++++------ drivers/video/backlight/lcd.c | 32 ++++++++++++++++---------------- 2 files changed, 28 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 334b1db1bd7c..27597c576eff 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -29,12 +29,15 @@ static ssize_t backlight_show_power(struct class_device *cdev, char *buf) static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count) { - int rc = -ENXIO, power; + int rc = -ENXIO; char *endp; struct backlight_device *bd = to_backlight_device(cdev); + int power = simple_strtoul(buf, &endp, 0); + size_t size = endp - buf; - power = simple_strtoul(buf, &endp, 0); - if (*endp && !isspace(*endp)) + if (*endp && isspace(*endp)) + size++; + if (size != count) return -EINVAL; down(&bd->sem); @@ -65,12 +68,15 @@ static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf) static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count) { - int rc = -ENXIO, brightness; + int rc = -ENXIO; char *endp; struct backlight_device *bd = to_backlight_device(cdev); + int brightness = simple_strtoul(buf, &endp, 0); + size_t size = endp - buf; - brightness = simple_strtoul(buf, &endp, 0); - if (*endp && !isspace(*endp)) + if (*endp && isspace(*endp)) + size++; + if (size != count) return -EINVAL; down(&bd->sem); diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 86908a60c630..bc8ab005a3fb 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -31,12 +31,15 @@ static ssize_t lcd_show_power(struct class_device *cdev, char *buf) static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_t count) { - int rc, power; + int rc = -ENXIO; char *endp; struct lcd_device *ld = to_lcd_device(cdev); + int power = simple_strtoul(buf, &endp, 0); + size_t size = endp - buf; - power = simple_strtoul(buf, &endp, 0); - if (*endp && !isspace(*endp)) + if (*endp && isspace(*endp)) + size++; + if (size != count) return -EINVAL; down(&ld->sem); @@ -44,8 +47,7 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_ pr_debug("lcd: set power to %d\n", power); ld->props->set_power(ld, power); rc = count; - } else - rc = -ENXIO; + } up(&ld->sem); return rc; @@ -53,14 +55,12 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf) { - int rc; + int rc = -ENXIO; struct lcd_device *ld = to_lcd_device(cdev); down(&ld->sem); if (likely(ld->props && ld->props->get_contrast)) rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld)); - else - rc = -ENXIO; up(&ld->sem); return rc; @@ -68,12 +68,15 @@ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf) static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, size_t count) { - int rc, contrast; + int rc = -ENXIO; char *endp; struct lcd_device *ld = to_lcd_device(cdev); + int contrast = simple_strtoul(buf, &endp, 0); + size_t size = endp - buf; - contrast = simple_strtoul(buf, &endp, 0); - if (*endp && !isspace(*endp)) + if (*endp && isspace(*endp)) + size++; + if (size != count) return -EINVAL; down(&ld->sem); @@ -81,8 +84,7 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si pr_debug("lcd: set contrast to %d\n", contrast); ld->props->set_contrast(ld, contrast); rc = count; - } else - rc = -ENXIO; + } up(&ld->sem); return rc; @@ -90,14 +92,12 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf) { - int rc; + int rc = -ENXIO; struct lcd_device *ld = to_lcd_device(cdev); down(&ld->sem); if (likely(ld->props)) rc = sprintf(buf, "%d\n", ld->props->max_contrast); - else - rc = -ENXIO; up(&ld->sem); return rc; -- cgit v1.2.3 From 3dc7b82ea7649356bf027fba50c16ca50cec31e2 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 15 May 2006 09:44:17 -0700 Subject: [PATCH] LED: Fix sysfs store function error handling Fix the error handling of some LED _store functions. This corrects them to return -EINVAL if the value is not numeric with an optional byte of trailing whitespace. Signed-off-by: Richard Purdie Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/led-class.c | 9 +++++++-- drivers/leds/ledtrig-timer.c | 17 +++++++++++++---- 2 files changed, 20 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index b0b5d05fadd6..c75d0ef1609c 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "leds.h" @@ -43,9 +44,13 @@ static ssize_t led_brightness_store(struct class_device *dev, ssize_t ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); + size_t count = after - buf; - if (after - buf > 0) { - ret = after - buf; + if (*after && isspace(*after)) + count++; + + if (count == size) { + ret = count; led_set_brightness(led_cdev, state); } diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index f484b5d6dbf8..fbf141ef46ec 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include "leds.h" @@ -69,11 +70,15 @@ static ssize_t led_delay_on_store(struct class_device *dev, const char *buf, int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); + size_t count = after - buf; - if (after - buf > 0) { + if (*after && isspace(*after)) + count++; + + if (count == size) { timer_data->delay_on = state; mod_timer(&timer_data->timer, jiffies + 1); - ret = after - buf; + ret = count; } return ret; @@ -97,11 +102,15 @@ static ssize_t led_delay_off_store(struct class_device *dev, const char *buf, int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + + if (*after && isspace(*after)) + count++; - if (after - buf > 0) { + if (count == size) { timer_data->delay_off = state; mod_timer(&timer_data->timer, jiffies + 1); - ret = after - buf; + ret = count; } return ret; -- cgit v1.2.3 From 2a7362f52a17e8dbeab57c00c3c45fcfeb0dff54 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Mon, 15 May 2006 09:44:25 -0700 Subject: [PATCH] tpm: fix constant Fix the constant used for the base address when it cannot be determined from ACPI. It was off by one order of magnitude. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_tis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index b9cae9a238bb..f621168f38ae 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -55,7 +55,7 @@ enum tis_int_flags { }; enum tis_defaults { - TIS_MEM_BASE = 0xFED4000, + TIS_MEM_BASE = 0xFED40000, TIS_MEM_LEN = 0x5000, TIS_SHORT_TIMEOUT = 750, /* ms */ TIS_LONG_TIMEOUT = 2000, /* 2 sec */ -- cgit v1.2.3 From 655fdeab809a5612b0eab6aee873b00d26404ca7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 15 May 2006 09:44:26 -0700 Subject: [PATCH] Final rio polish Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/Kconfig | 2 +- drivers/char/rio/host.h | 9 -------- drivers/char/rio/rioboot.c | 1 + drivers/char/rio/rioctrl.c | 43 ++++++++++++++++++++++------------ drivers/char/rio/rioioctl.h | 56 ++++----------------------------------------- 5 files changed, 35 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 402296670d3a..78d928f9d9f1 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -291,7 +291,7 @@ config SX config RIO tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD && !64BIT + depends on SERIAL_NONSTANDARD help This is a driver for the Specialix RIO, a smart serial card which drives an outboard box that can support up to 128 ports. Product diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h index 3ec73d1a279a..179cdbea712b 100644 --- a/drivers/char/rio/host.h +++ b/drivers/char/rio/host.h @@ -33,12 +33,6 @@ #ifndef __rio_host_h__ #define __rio_host_h__ -#ifdef SCCS_LABELS -#ifndef lint -static char *_host_h_sccs_ = "@(#)host.h 1.2"; -#endif -#endif - /* ** the host structure - one per host card in the system. */ @@ -77,9 +71,6 @@ struct Host { #define RC_STARTUP 1 #define RC_RUNNING 2 #define RC_STUFFED 3 -#define RC_SOMETHING 4 -#define RC_SOMETHING_NEW 5 -#define RC_SOMETHING_ELSE 6 #define RC_READY 7 #define RUN_STATE 7 /* diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c index acda9326c2ef..290143addd34 100644 --- a/drivers/char/rio/rioboot.c +++ b/drivers/char/rio/rioboot.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c index d31aba62bb7f..75b2557c37ec 100644 --- a/drivers/char/rio/rioctrl.c +++ b/drivers/char/rio/rioctrl.c @@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd) return RIO_FAIL; } - if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) { - rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum); + if ((PortP->InUse == (typeof(PortP->InUse))-1) || + !(CmdBlkP = RIOGetCmdBlk())) { + rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block " + "for command %d on port %d\n", Cmd, PortP->PortNum); return RIO_FAIL; } - rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse); + rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", + CmdBlkP, PortP->InUse); - PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0]; + PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0]; CmdBlkP->Packet.src_unit = 0; if (PortP->SecondBlock) @@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd) switch (Cmd) { case MEMDUMP: - rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr); + rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p " + "(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr); PktCmdP->SubCommand = MEMDUMP; PktCmdP->SubAddr = SubCmd.Addr; break; case FCLOSE: - rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", + CmdBlkP); break; case READ_REGISTER: - rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) " + "command blk %p\n", (int) SubCmd.Addr, CmdBlkP); PktCmdP->SubCommand = READ_REGISTER; PktCmdP->SubAddr = SubCmd.Addr; break; case RESUME: - rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", + CmdBlkP); break; case RFLUSH: - rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", + CmdBlkP); CmdBlkP->PostFuncP = RIORFlushEnable; break; case SUSPEND: - rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", + CmdBlkP); break; case MGET: - rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", + CmdBlkP); break; case MSET: case MBIC: case MBIS: CmdBlkP->Packet.data[4] = (char) PortP->ModemLines; - rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command " + "blk %p\n", CmdBlkP); break; case WFLUSH: @@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd) ** allowed then we should not bother sending any more to the ** RTA. */ - if ((int) ((char) PortP->WflushFlag) == (int) -1) { - rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!"); + if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) { + rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, " + "WflushFlag about to wrap!"); RIOFreeCmdBlk(CmdBlkP); return (RIO_FAIL); } else { - rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP); + rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command " + "blk %p\n", CmdBlkP); CmdBlkP->PostFuncP = RIOWFlushMark; } break; diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h index 14b83fae75c8..e8af5b30519e 100644 --- a/drivers/char/rio/rioioctl.h +++ b/drivers/char/rio/rioioctl.h @@ -33,10 +33,6 @@ #ifndef __rioioctl_h__ #define __rioioctl_h__ -#ifdef SCCS_LABELS -static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h 1.2"; -#endif - /* ** RIO device driver - user ioctls and associated structures. */ @@ -44,55 +40,13 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h 1.2"; struct portStats { int port; int gather; - ulong txchars; - ulong rxchars; - ulong opens; - ulong closes; - ulong ioctls; + unsigned long txchars; + unsigned long rxchars; + unsigned long opens; + unsigned long closes; + unsigned long ioctls; }; - -#define rIOC ('r'<<8) -#define TCRIOSTATE (rIOC | 1) -#define TCRIOXPON (rIOC | 2) -#define TCRIOXPOFF (rIOC | 3) -#define TCRIOXPCPS (rIOC | 4) -#define TCRIOXPRINT (rIOC | 5) -#define TCRIOIXANYON (rIOC | 6) -#define TCRIOIXANYOFF (rIOC | 7) -#define TCRIOIXONON (rIOC | 8) -#define TCRIOIXONOFF (rIOC | 9) -#define TCRIOMBIS (rIOC | 10) -#define TCRIOMBIC (rIOC | 11) -#define TCRIOTRIAD (rIOC | 12) -#define TCRIOTSTATE (rIOC | 13) - -/* -** 15.10.1998 ARG - ESIL 0761 part fix -** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS -** appears to not support hardware flow control). -*/ -#define TCRIOCTSFLOWEN (rIOC | 14) /* enable CTS flow control */ -#define TCRIOCTSFLOWDIS (rIOC | 15) /* disable CTS flow control */ -#define TCRIORTSFLOWEN (rIOC | 16) /* enable RTS flow control */ -#define TCRIORTSFLOWDIS (rIOC | 17) /* disable RTS flow control */ - -/* -** 09.12.1998 ARG - ESIL 0776 part fix -** Definition for 'RIOC' also appears in daemon.h, so we'd better do a -** #ifndef here first. -** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now -** allowed to be used by customers. -** -** 05.02.1999 ARG - -** This is what I've decied to do with ioctls etc., which are intended to be -** invoked from users applications : -** Anything that needs to be defined here will be removed from daemon.h, that -** way it won't end up having to be defined/maintained in two places. The only -** consequence of this is that this file should now be #include'd by daemon.h -** -** 'stats' ioctls now #define'd here as they are to be used by customers. -*/ #define RIOC ('R'<<8)|('i'<<16)|('o'<<24) #define RIO_QUICK_CHECK (RIOC | 105) -- cgit v1.2.3 From bb53a76116a8af13ee2581c85c02fe40e0c1a599 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Mon, 15 May 2006 09:44:27 -0700 Subject: [PATCH] tpm_register_hardware gcc 4.1 warning fix drivers/char/tpm/tpm.c: In function 'tpm_register_hardware': drivers/char/tpm/tpm.c:1157: warning: assignment from incompatible pointer type Signed-off-by: Daniel Walker Acked-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 54a4c804e25f..050ced247f68 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -140,7 +140,7 @@ extern int tpm_pm_resume(struct device *); extern struct dentry ** tpm_bios_log_setup(char *); extern void tpm_bios_log_teardown(struct dentry **); #else -static inline struct dentry* tpm_bios_log_setup(char *name) +static inline struct dentry ** tpm_bios_log_setup(char *name) { return NULL; } -- cgit v1.2.3 From ce007ea59729d627f62bb5fa8c1a81e25653a0ad Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Mon, 15 May 2006 09:44:33 -0700 Subject: [PATCH] smbus unhiding kills thermal management Do not enable the SMBus device on Asus boards if suspend is used. We do not reenable the device on resume, leading to all sorts of undesirable effects, the worst being a total fan failure after resume on Samsung P35 laptop. Signed-off-by: Carl-Daniel Hailfinger Signed-off-by: Pavel Machek Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0d36d5040880..d378478612fb 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -902,6 +902,7 @@ static void __init k8t_sound_hostbridge(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge); +#ifndef CONFIG_ACPI_SLEEP /* * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge * is not activated. The myth is that Asus said that they do not want the @@ -913,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it * becomes necessary to do this tweak in two steps -- I've chosen the Host * bridge as trigger. + * + * Actually, leaving it unhidden and not redoing the quirk over suspend2ram + * will cause thermal management to break down, and causing machine to + * overheat. */ -static int __initdata asus_hides_smbus = 0; +static int __initdata asus_hides_smbus; static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) { @@ -1057,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 ); +#endif + /* * SiS 96x south bridge: BIOS typically hides SMBus device... */ -- cgit v1.2.3 From bfe2e9349f318883c036607c64b6205d573a28ff Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 15 May 2006 09:44:35 -0700 Subject: [PATCH] gigaset: endian fix Signed-off-by: Alexey Dobriyan Cc: Hansjoerg Lipp Cc: Tilman Schmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/isdn/gigaset/usb-gigaset.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index bfb73fd5077e..d86ab68114b0 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -710,8 +710,8 @@ static int gigaset_probe(struct usb_interface *interface, retval = -ENODEV; //FIXME /* See if the device offered us matches what we can accept */ - if ((le16_to_cpu(udev->descriptor.idVendor != USB_M105_VENDOR_ID)) || - (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID))) + if ((le16_to_cpu(udev->descriptor.idVendor) != USB_M105_VENDOR_ID) || + (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) return -ENODEV; /* this starts to become ascii art... */ -- cgit v1.2.3 From 264a341231e8af2c2e35ac15d26de76f1198525b Mon Sep 17 00:00:00 2001 From: Thomas Kleffel Date: Mon, 15 May 2006 09:44:37 -0700 Subject: [PATCH] ide_cs: Add IBM microdrive to known IDs Add the IBM microdrive to the known PCMCIA IDs for ide_cs. Signed-off-by: Thomas Kleffel Cc: Bartlomiej Zolnierkiewicz Cc: Alan Cox Cc: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/legacy/ide-cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 4961f1e764a7..602797a44208 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -392,6 +392,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), -- cgit v1.2.3 From c4694c76ce28dd7e415b4f3014d8c6e580b5f3d2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 15 May 2006 09:44:43 -0700 Subject: [PATCH] dl2k needs dma-mapping.h On alpha: drivers/net/dl2k.c: In function `rio_free_tx': drivers/net/dl2k.c:768: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c:768: error: (Each undeclared identifier is reported only once drivers/net/dl2k.c:768: error: for each function it appears in.) drivers/net/dl2k.c: In function `receive_packet': drivers/net/dl2k.c:896: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c: In function `rio_close': drivers/net/dl2k.c:1803: error: `DMA_48BIT_MASK' undeclared (first use in this function) Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/dl2k.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 1ddefd281213..038447fb5c5e 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -53,6 +53,7 @@ #define DRV_VERSION "v1.17b" #define DRV_RELDATE "2006/03/10" #include "dl2k.h" +#include static char version[] __devinitdata = KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n"; -- cgit v1.2.3 From 1ea739a5f9f469a57d804ebcf70514b8a5efe9da Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 15 May 2006 12:25:29 -0700 Subject: The ixp2000 driver for the enp2611 was developed on a board with three gigabit ports, but some enp2611 models only have two ports (and only one onboard PM3386.) The current driver assumes there are always three ports and so it doesn't work on the two-port version of the board at all. This patch adds a bit of logic to the enp2611 driver to limit the number of ports to 2 if the second PM3386 isn't detected. Signed-off-by: Lennert Buytenhek Signed-off-by: Stephen Hemminger --- drivers/net/ixp2000/enp2611.c | 13 +++++++++---- drivers/net/ixp2000/pm3386.c | 30 ++++++++++++++++++++++++------ drivers/net/ixp2000/pm3386.h | 1 + 3 files changed, 34 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index 6f7dce8eba51..b67f586d7392 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy) int status; dev = nds[i]; + if (dev == NULL) + continue; status = pm3386_is_link_up(i); if (status && !netif_carrier_ok(dev)) { @@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up) static int __init enp2611_init_module(void) { + int ports; int i; if (!machine_is_enp2611()) @@ -199,7 +202,8 @@ static int __init enp2611_init_module(void) caleb_reset(); pm3386_reset(); - for (i = 0; i < 3; i++) { + ports = pm3386_port_count(); + for (i = 0; i < ports; i++) { nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv)); if (nds[i] == NULL) { while (--i >= 0) @@ -215,9 +219,10 @@ static int __init enp2611_init_module(void) ixp2400_msf_init(&enp2611_msf_parameters); - if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) { - for (i = 0; i < 3; i++) - free_netdev(nds[i]); + if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { + for (i = 0; i < ports; i++) + if (nds[i]) + free_netdev(nds[i]); return -EINVAL; } diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index 5c7ab7564053..5224651c9aac 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -86,40 +86,53 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value) pm3386_reg_write(port >> 1, reg, value); } +int pm3386_secondary_present(void) +{ + return pm3386_reg_read(1, 0) == 0x3386; +} void pm3386_reset(void) { u8 mac[3][6]; + int secondary; + + secondary = pm3386_secondary_present(); /* Save programmed MAC addresses. */ pm3386_get_mac(0, mac[0]); pm3386_get_mac(1, mac[1]); - pm3386_get_mac(2, mac[2]); + if (secondary) + pm3386_get_mac(2, mac[2]); /* Assert analog and digital reset. */ pm3386_reg_write(0, 0x002, 0x0060); - pm3386_reg_write(1, 0x002, 0x0060); + if (secondary) + pm3386_reg_write(1, 0x002, 0x0060); mdelay(1); /* Deassert analog reset. */ pm3386_reg_write(0, 0x002, 0x0062); - pm3386_reg_write(1, 0x002, 0x0062); + if (secondary) + pm3386_reg_write(1, 0x002, 0x0062); mdelay(10); /* Deassert digital reset. */ pm3386_reg_write(0, 0x002, 0x0063); - pm3386_reg_write(1, 0x002, 0x0063); + if (secondary) + pm3386_reg_write(1, 0x002, 0x0063); mdelay(10); /* Restore programmed MAC addresses. */ pm3386_set_mac(0, mac[0]); pm3386_set_mac(1, mac[1]); - pm3386_set_mac(2, mac[2]); + if (secondary) + pm3386_set_mac(2, mac[2]); /* Disable carrier on all ports. */ pm3386_set_carrier(0, 0); pm3386_set_carrier(1, 0); - pm3386_set_carrier(2, 0); + if (secondary) + pm3386_set_carrier(2, 0); } static u16 swaph(u16 x) @@ -127,6 +140,11 @@ static u16 swaph(u16 x) return ((x << 8) | (x >> 8)) & 0xffff; } +int pm3386_port_count(void) +{ + return 2 + pm3386_secondary_present(); +} + void pm3386_init_port(int port) { int pm = port >> 1; diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h index fe92bb056ac4..cc4183dca911 100644 --- a/drivers/net/ixp2000/pm3386.h +++ b/drivers/net/ixp2000/pm3386.h @@ -13,6 +13,7 @@ #define __PM3386_H void pm3386_reset(void); +int pm3386_port_count(void); void pm3386_init_port(int port); void pm3386_get_mac(int port, u8 *mac); void pm3386_set_mac(int port, u8 *mac); -- cgit v1.2.3 From de54bc0f00c23a805f4ad2146c5a1fd5e2abe1e9 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 15 May 2006 18:19:35 +0200 Subject: x86_64: Check for bad dma address in b44 1GB DMA workaround Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen Signed-off-by: Stephen Hemminger --- drivers/net/b44.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 3d306681919e..d8233e0b7899 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) /* Hardware bug work-around, the chip is unable to do PCI DMA to/from anything above 1GB :-( */ - if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { + if (dma_mapping_error(mapping) || + mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { /* Sigh... */ - pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); dev_kfree_skb_any(skb); skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA); if (skb == NULL) @@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) mapping = pci_map_single(bp->pdev, skb->data, RX_PKT_BUF_SZ, PCI_DMA_FROMDEVICE); - if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { - pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); + if (dma_mapping_error(mapping) || + mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); dev_kfree_skb_any(skb); return -ENOMEM; } @@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) } mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); - if (mapping + len > B44_DMA_MASK) { + if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) { /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); @@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) mapping = pci_map_single(bp->pdev, bounce_skb->data, len, PCI_DMA_TODEVICE); - if (mapping + len > B44_DMA_MASK) { - pci_unmap_single(bp->pdev, mapping, + if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) { + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); dev_kfree_skb_any(bounce_skb); goto err_out; @@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b44 *bp) DMA_TABLE_BYTES, DMA_BIDIRECTIONAL); - if (rx_ring_dma + size > B44_DMA_MASK) { + if (dma_mapping_error(rx_ring_dma) || + rx_ring_dma + size > B44_DMA_MASK) { kfree(rx_ring); goto out_err; } @@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b44 *bp) DMA_TABLE_BYTES, DMA_TO_DEVICE); - if (tx_ring_dma + size > B44_DMA_MASK) { + if (dma_mapping_error(tx_ring_dma) || + tx_ring_dma + size > B44_DMA_MASK) { kfree(tx_ring); goto out_err; } -- cgit v1.2.3 From 843a46f423a508b3a443a08baa903c6da02f3297 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 11 May 2006 15:07:28 -0700 Subject: sky2: prevent dual port receiver problems When both ports are receiving simultaneously, the receive logic gets confused and may pass up a packet before it is full. This causes hangs, and IP will see lots of garbage packets. There is even the potential for data corruption if a later arriving packet DMA's into freed memory. It looks like a hardware bug because status arrives for a packet but no data is there. Until this bug is worked out, block the user from bringing up both ports at once. Signed-off-by: Stephen Hemminger --- drivers/net/sky2.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ffd267fab21d..62be6d99d05c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1020,8 +1020,19 @@ static int sky2_up(struct net_device *dev) struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; u32 ramsize, rxspace, imask; - int err = -ENOMEM; + int err; + struct net_device *otherdev = hw->dev[sky2->port^1]; + /* Block bringing up both ports at the same time on a dual port card. + * There is an unfixed bug where receiver gets confused and picks up + * packets out of order. Until this is fixed, prevent data corruption. + */ + if (otherdev && netif_running(otherdev)) { + printk(KERN_INFO PFX "dual port support is disabled.\n"); + return -EBUSY; + } + + err = -ENOMEM; if (netif_msg_ifup(sky2)) printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); -- cgit v1.2.3 From 7071e522a58cb1b3469e4cd8664ef03a32076349 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 3 Apr 2006 16:04:48 -0700 Subject: [WATCHDOG] sc1200wdt.c printk fix Fix printk output. sc1200wdt: build 20020303<3>sc1200wdt: io parameter must be specified Signed-off-by: Dave Jones Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/watchdog/sc1200wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c index 515ce7572049..20b88f9b7be2 100644 --- a/drivers/char/watchdog/sc1200wdt.c +++ b/drivers/char/watchdog/sc1200wdt.c @@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void) { int ret; - printk(banner); + printk("%s\n", banner); spin_lock_init(&sc1200wdt_lock); sema_init(&open_sem, 1); -- cgit v1.2.3 From 03a8e359cf760a876f4da9b5c0c165c49564f95a Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sun, 16 Apr 2006 12:52:35 +0200 Subject: [WATCHDOG] i8xx_tco.c - remove support for ICH6 + ICH7 Temporary remove support for ICH6 + ICH7. In these newer TCO's the watchdog timer has changed: the TCO_TMR register is not at the TCOBASE+0x1 offset, but changed it's place to TCOBASE+0x12 and became 10 bit long [0:9]. (Kernel BUG 6031). ICH6 + ICH7 support will be added in a new driver. Code is under test. Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/watchdog/i8xx_tco.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c index a13395e2c372..fa2ba9ebe42a 100644 --- a/drivers/char/watchdog/i8xx_tco.c +++ b/drivers/char/watchdog/i8xx_tco.c @@ -33,11 +33,6 @@ * 82801E (C-ICH) : document number 273599-001, 273645-002, * 82801EB (ICH5) : document number 252516-001, 252517-003, * 82801ER (ICH5R) : document number 252516-001, 252517-003, - * 82801FB (ICH6) : document number 301473-002, 301474-007, - * 82801FR (ICH6R) : document number 301473-002, 301474-007, - * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, - * 82801FW (ICH6W) : document number 301473-001, 301474-007, - * 82801FRW (ICH6RW) : document number 301473-001, 301474-007 * * 20000710 Nils Faerber * Initial Version 0.01 @@ -66,6 +61,10 @@ * 20050807 Wim Van Sebroeck * 0.08 Make sure that the watchdog is only "armed" when started. * (Kernel Bug 4251) + * 20060416 Wim Van Sebroeck + * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and + * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these + * chipsets) */ /* @@ -90,7 +89,7 @@ #include "i8xx_tco.h" /* Module and version information */ -#define TCO_VERSION "0.08" +#define TCO_VERSION "0.09" #define TCO_MODULE_NAME "i8xx TCO timer" #define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION #define PFX TCO_MODULE_NAME ": " @@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, }, { 0, }, /* End of list */ }; -- cgit v1.2.3 From 655516c80ccb3ab2ba2d3063715889b00552a8b3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Apr 2006 23:02:56 +0100 Subject: [WATCHDOG] s3c2410_wdt.c stop watchdog after boot If the s3c2410 watchdog timer is not enabled by the driver at startup, ensure that it is stopped in-case the boot process has enabled it. Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/watchdog/s3c2410_wdt.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 9dc54736e4eb..1ea04e9b2b0b 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (tmr_atboot && started == 0) { printk(KERN_INFO PFX "Starting Watchdog Timer\n"); s3c2410wdt_start(); + } else if (!tmr_atboot) { + /* if we're not enabling the watchdog, then ensure it is + * disabled if it has been left running from the bootloader + * or other source */ + + s3c2410wdt_stop(); } return 0; -- cgit v1.2.3 From 1281e36027a9119356bd93b5e7853c72c35dd462 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 16 May 2006 11:28:49 +0100 Subject: [ARM] 3523/1: Serial core pm_state Patch from Andrew Victor The serial_core already manages the power state of the UARTs, and therefore it shouldn't suspend a UART which was previously suspended. This patch modifies serial_core only call the UART-specific power-management function if the PM state is actually changing. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- drivers/serial/serial_core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index aeb8153ccf24..17839e753e4c 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co, static void uart_change_pm(struct uart_state *state, int pm_state) { struct uart_port *port = state->port; - if (port->ops->pm) - port->ops->pm(port, pm_state, state->pm_state); - state->pm_state = pm_state; + + if (state->pm_state != pm_state) { + if (port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; + } } int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) -- cgit v1.2.3 From 639b421b911bbde1e3fb5ed037a4f8c85a5bffcb Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 15 May 2006 18:19:35 +0200 Subject: [PATCH] x86_64: Check for bad dma address in b44 1GB DMA workaround Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- drivers/net/b44.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 3d306681919e..d8233e0b7899 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) /* Hardware bug work-around, the chip is unable to do PCI DMA to/from anything above 1GB :-( */ - if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { + if (dma_mapping_error(mapping) || + mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { /* Sigh... */ - pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); dev_kfree_skb_any(skb); skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA); if (skb == NULL) @@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) mapping = pci_map_single(bp->pdev, skb->data, RX_PKT_BUF_SZ, PCI_DMA_FROMDEVICE); - if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { - pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); + if (dma_mapping_error(mapping) || + mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) { + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); dev_kfree_skb_any(skb); return -ENOMEM; } @@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) } mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); - if (mapping + len > B44_DMA_MASK) { + if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) { /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); @@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) mapping = pci_map_single(bp->pdev, bounce_skb->data, len, PCI_DMA_TODEVICE); - if (mapping + len > B44_DMA_MASK) { - pci_unmap_single(bp->pdev, mapping, + if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) { + if (!dma_mapping_error(mapping)) + pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); dev_kfree_skb_any(bounce_skb); goto err_out; @@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b44 *bp) DMA_TABLE_BYTES, DMA_BIDIRECTIONAL); - if (rx_ring_dma + size > B44_DMA_MASK) { + if (dma_mapping_error(rx_ring_dma) || + rx_ring_dma + size > B44_DMA_MASK) { kfree(rx_ring); goto out_err; } @@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b44 *bp) DMA_TABLE_BYTES, DMA_TO_DEVICE); - if (tx_ring_dma + size > B44_DMA_MASK) { + if (dma_mapping_error(tx_ring_dma) || + tx_ring_dma + size > B44_DMA_MASK) { kfree(tx_ring); goto out_err; } -- cgit v1.2.3 From 4cff33f94fefcce1b3c01a9d1da6bb85fe3cbdfa Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 17 Feb 2006 10:02:18 -0800 Subject: [PATCH] SPI: per-transfer overrides for wordsize and clocking Some protocols (like one for some bitmap displays) require different clock speed or word size settings for each transfer in an SPI message. This adds those parameters to struct spi_transfer. They are to be used when they are nonzero; otherwise the defaults from spi_device are to be used. The patch also adds a setup_transfer callback to spi_bitbang, uses it for messages that use those overrides, and implements it so that the pure bitbanging code can help resolve any questions about how it should work. Signed-off-by: Imre Deak Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 77 +++++++++++++++++++++++++++++++++-------- include/linux/spi/spi.h | 8 +++++ include/linux/spi/spi_bitbang.h | 6 ++++ 3 files changed, 77 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index f037e5593269..0525c99118c3 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -138,6 +138,43 @@ static unsigned bitbang_txrx_32( return t->len - count; } +static int +bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + u8 bits_per_word; + u32 hz; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } else { + bits_per_word = 0; + hz = 0; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + if (bits_per_word <= 8) + cs->txrx_bufs = bitbang_txrx_8; + else if (bits_per_word <= 16) + cs->txrx_bufs = bitbang_txrx_16; + else if (bits_per_word <= 32) + cs->txrx_bufs = bitbang_txrx_32; + else + return -EINVAL; + + /* nsecs = (clock period)/2 */ + if (!hz) + hz = spi->max_speed_hz; + cs->nsecs = (1000000000/2) / hz; + if (cs->nsecs > MAX_UDELAY_MS * 1000) + return -EINVAL; + + return 0; +} + /** * spi_bitbang_setup - default setup for per-word I/O loops */ @@ -145,6 +182,7 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; + int retval; if (!spi->max_speed_hz) return -EINVAL; @@ -160,25 +198,14 @@ int spi_bitbang_setup(struct spi_device *spi) if (!spi->bits_per_word) spi->bits_per_word = 8; - /* spi_transfer level calls that work per-word */ - if (spi->bits_per_word <= 8) - cs->txrx_bufs = bitbang_txrx_8; - else if (spi->bits_per_word <= 16) - cs->txrx_bufs = bitbang_txrx_16; - else if (spi->bits_per_word <= 32) - cs->txrx_bufs = bitbang_txrx_32; - else - return -EINVAL; - /* per-word shift register access, in hardware or bitbanging */ cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; if (!cs->txrx_word) return -EINVAL; - /* nsecs = (clock period)/2 */ - cs->nsecs = (1000000000/2) / (spi->max_speed_hz); - if (cs->nsecs > MAX_UDELAY_MS * 1000) - return -EINVAL; + retval = bitbang_transfer_setup(spi, NULL); + if (retval < 0) + return retval; dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n", __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA), @@ -246,6 +273,8 @@ static void bitbang_work(void *_bitbang) unsigned tmp; unsigned cs_change; int status; + int (*setup_transfer)(struct spi_device *, + struct spi_transfer *); m = container_of(bitbang->queue.next, struct spi_message, queue); @@ -262,6 +291,7 @@ static void bitbang_work(void *_bitbang) tmp = 0; cs_change = 1; status = 0; + setup_transfer = NULL; list_for_each_entry (t, &m->transfers, transfer_list) { if (bitbang->shutdown) { @@ -269,6 +299,20 @@ static void bitbang_work(void *_bitbang) break; } + /* override or restore speed and wordsize */ + if (t->speed_hz || t->bits_per_word) { + setup_transfer = bitbang->setup_transfer; + if (!setup_transfer) { + status = -ENOPROTOOPT; + break; + } + } + if (setup_transfer) { + status = setup_transfer(spi, t); + if (status < 0) + break; + } + /* set up default clock polarity, and activate chip; * this implicitly updates clock and spi modes as * previously recorded for this device via setup(). @@ -325,6 +369,10 @@ static void bitbang_work(void *_bitbang) m->status = status; m->complete(m->context); + /* restore speed and wordsize */ + if (setup_transfer) + setup_transfer(spi, NULL); + /* normally deactivate chipselect ... unless no error and * cs_change has hinted that the next message will probably * be for this chip too. @@ -406,6 +454,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; if (!bitbang->master->setup) { + bitbang->setup_transfer = bitbang_transfer_setup; bitbang->master->setup = spi_bitbang_setup; bitbang->master->cleanup = spi_bitbang_cleanup; } diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index b05f1463a267..caa4665e3fa2 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -31,6 +31,7 @@ extern struct bus_type spi_bus_type; * @master: SPI controller used with the device. * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. + * The spi_transfer.speed_hz can override this for each transfer. * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. @@ -38,6 +39,7 @@ extern struct bus_type spi_bus_type; * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. + * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. * @controller_state: Controller's runtime state @@ -268,6 +270,10 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped * @len: size of rx and tx buffers (in bytes) + * @speed_hz: Select a speed other then the device default for this + * transfer. If 0 the default (from spi_device) is used. + * @bits_per_word: select a bits_per_word other then the device default + * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before * (optionally) changing the chipselect status, then starting @@ -322,7 +328,9 @@ struct spi_transfer { dma_addr_t rx_dma; unsigned cs_change:1; + u8 bits_per_word; u16 delay_usecs; + u32 speed_hz; struct list_head transfer_list; }; diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c961fe9bf3eb..c954557b757c 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -30,6 +30,12 @@ struct spi_bitbang { struct spi_master *master; + /* setup_transfer() changes clock and/or wordsize to match settings + * for this transfer; zeroes restore defaults from spi_device. + */ + int (*setup_transfer)(struct spi_device *spi, + struct spi_transfer *t); + void (*chipselect)(struct spi_device *spi, int is_on); #define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */ #define BITBANG_CS_INACTIVE 0 -- cgit v1.2.3 From e0c9905e87ac1bc56c9ea8f5b2934aeee53dce26 Mon Sep 17 00:00:00 2001 From: Stephen Street Date: Tue, 7 Mar 2006 23:53:24 -0800 Subject: [PATCH] SPI: add PXA2xx SSP SPI Driver This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master controller (see Documentation/spi/spi_summary). The driver has the following features: - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. - External and Internal (SSPFRM) chip selects. - Per slave device (chip) configuration. - Full suspend, freeze, resume support. Signed-off-by: Stephen Street Signed-off-by: Andrew Morton Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/spi/pxa2xx | 234 ++++++ drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/pxa2xx_spi.c | 1399 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/pxa2xx_spi.h | 68 ++ 5 files changed, 1710 insertions(+) create mode 100644 Documentation/spi/pxa2xx create mode 100644 drivers/spi/pxa2xx_spi.c create mode 100644 include/asm-arm/arch-pxa/pxa2xx_spi.h (limited to 'drivers') diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx new file mode 100644 index 000000000000..9c45f3df2e18 --- /dev/null +++ b/Documentation/spi/pxa2xx @@ -0,0 +1,234 @@ +PXA2xx SPI on SSP driver HOWTO +=================================================== +This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx +synchronous serial port into a SPI master controller +(see Documentation/spi/spi_summary). The driver has the following features + +- Support for any PXA2xx SSP +- SSP PIO and SSP DMA data transfers. +- External and Internal (SSPFRM) chip selects. +- Per slave device (chip) configuration. +- Full suspend, freeze, resume support. + +The driver is built around a "spi_message" fifo serviced by workqueue and a +tasklet. The workqueue, "pump_messages", drives message fifo and the tasklet +(pump_transfer) is responsible for queuing SPI transactions and setting up and +launching the dma/interrupt driven transfers. + +Declaring PXA2xx Master Controllers +----------------------------------- +Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a +"platform device". The master configuration is passed to the driver via a table +found in include/asm-arm/arch-pxa/pxa2xx_spi.h: + +struct pxa2xx_spi_master { + enum pxa_ssp_type ssp_type; + u32 clock_enable; + u16 num_chipselect; + u8 enable_dma; +}; + +The "pxa2xx_spi_master.ssp_type" field must have a value between 1 and 3 and +informs the driver which features a particular SSP supports. + +The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the +corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See +the "PXA2xx Developer Manual" section "Clocks and Power Management". + +The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of +slave device (chips) attached to this SPI master. + +The "pxa2xx_spi_master.enable_dma" field informs the driver that SSP DMA should +be used. This caused the driver to acquire two DMA channels: rx_channel and +tx_channel. The rx_channel has a higher DMA service priority the tx_channel. +See the "PXA2xx Developer Manual" section "DMA Controller". + +NSSP MASTER SAMPLE +------------------ +Below is a sample configuration using the PXA255 NSSP. + +static struct resource pxa_spi_nssp_resources[] = { + [0] = { + .start = __PREG(SSCR0_P(2)), /* Start address of NSSP */ + .end = __PREG(SSCR0_P(2)) + 0x2c, /* Range of registers */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_NSSP, /* NSSP IRQ */ + .end = IRQ_NSSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pxa2xx_spi_master pxa_nssp_master_info = { + .ssp_type = PXA25x_NSSP, /* Type of SSP */ + .clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */ + .num_chipselect = 1, /* Matches the number of chips attached to NSSP */ + .enable_dma = 1, /* Enables NSSP DMA */ +}; + +static struct platform_device pxa_spi_nssp = { + .name = "pxa2xx-spi", /* MUST BE THIS VALUE, so device match driver */ + .id = 2, /* Bus number, MUST MATCH SSP number 1..n */ + .resource = pxa_spi_nssp_resources, + .num_resources = ARRAY_SIZE(pxa_spi_nssp_resources), + .dev = { + .platform_data = &pxa_nssp_master_info, /* Passed to driver */ + }, +}; + +static struct platform_device *devices[] __initdata = { + &pxa_spi_nssp, +}; + +static void __init board_init(void) +{ + (void)platform_add_device(devices, ARRAY_SIZE(devices)); +} + +Declaring Slave Devices +----------------------- +Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c +using the "spi_board_info" structure found in "linux/spi/spi.h". See +"Documentation/spi/spi_summary" for additional information. + +Each slave device attached to the PXA must provide slave specific configuration +information via the structure "pxa2xx_spi_chip" found in +"include/asm-arm/arch-pxa/pxa2xx_spi.h". The pxa2xx_spi master controller driver +will uses the configuration whenever the driver communicates with the slave +device. + +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout_microsecs; + u8 enable_loopback; + void (*cs_control)(u32 command); +}; + +The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are +used to configure the SSP hardware fifo. These fields are critical to the +performance of pxa2xx_spi driver and misconfiguration will result in rx +fifo overruns (especially in PIO mode transfers). Good default values are + + .tx_threshold = 12, + .rx_threshold = 4, + +The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA +engine and is related the "spi_device.bits_per_word" field. Read and understand +the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers +to determine the correct value. An SSP configured for byte-wide transfers would +use a value of 8. + +The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle +trailing bytes in the SSP receiver fifo. The correct value for this field is +dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific +slave device. Please note the the PXA2xx SSP 1 does not support trailing byte +timeouts and must busy-wait any trailing bytes. + +The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting +into internal loopback mode. In this mode the SSP controller internally +connects the SSPTX pin the the SSPRX pin. This is useful for initial setup +testing. + +The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific +function for asserting/deasserting a slave device chip select. If the field is +NULL, the pxa2xx_spi master controller driver assumes that the SSP port is +configured to use SSPFRM instead. + +NSSP SALVE SAMPLE +----------------- +The pxa2xx_spi_chip structure is passed to the pxa2xx_spi driver in the +"spi_board_info.controller_data" field. Below is a sample configuration using +the PXA255 NSSP. + +/* Chip Select control for the CS8415A SPI slave device */ +static void cs8415a_cs_control(u32 command) +{ + if (command & PXA2XX_CS_ASSERT) + GPCR(2) = GPIO_bit(2); + else + GPSR(2) = GPIO_bit(2); +} + +/* Chip Select control for the CS8405A SPI slave device */ +static void cs8405a_cs_control(u32 command) +{ + if (command & PXA2XX_CS_ASSERT) + GPCR(3) = GPIO_bit(3); + else + GPSR(3) = GPIO_bit(3); +} + +static struct pxa2xx_spi_chip cs8415a_chip_info = { + .tx_threshold = 12, /* SSP hardward FIFO threshold */ + .rx_threshold = 4, /* SSP hardward FIFO threshold */ + .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ + .timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */ + .cs_control = cs8415a_cs_control, /* Use external chip select */ +}; + +static struct pxa2xx_spi_chip cs8405a_chip_info = { + .tx_threshold = 12, /* SSP hardward FIFO threshold */ + .rx_threshold = 4, /* SSP hardward FIFO threshold */ + .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ + .timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */ + .cs_control = cs8405a_cs_control, /* Use external chip select */ +}; + +static struct spi_board_info streetracer_spi_board_info[] __initdata = { + { + .modalias = "cs8415a", /* Name of spi_driver for this device */ + .max_speed_hz = 3686400, /* Run SSP as fast a possbile */ + .bus_num = 2, /* Framework bus number */ + .chip_select = 0, /* Framework chip select */ + .platform_data = NULL; /* No spi_driver specific config */ + .controller_data = &cs8415a_chip_info, /* Master chip config */ + .irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */ + }, + { + .modalias = "cs8405a", /* Name of spi_driver for this device */ + .max_speed_hz = 3686400, /* Run SSP as fast a possbile */ + .bus_num = 2, /* Framework bus number */ + .chip_select = 1, /* Framework chip select */ + .controller_data = &cs8405a_chip_info, /* Master chip config */ + .irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */ + }, +}; + +static void __init streetracer_init(void) +{ + spi_register_board_info(streetracer_spi_board_info, + ARRAY_SIZE(streetracer_spi_board_info)); +} + + +DMA and PIO I/O Support +----------------------- +The pxa2xx_spi driver support both DMA and interrupt driven PIO message +transfers. The driver defaults to PIO mode and DMA transfers must enabled by +setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and and +ensuring that the "pxa2xx_spi_chip.dma_burst_size" field is non-zero. The DMA +mode support both coherent and stream based DMA mappings. + +The following logic is used to determine the type of I/O to be used on +a per "spi_transfer" basis: + +if !enable_dma or dma_burst_size == 0 then + always use PIO transfers + +if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then + use coherent DMA mode + +if rx_buf and tx_buf are aligned on 8 byte boundary then + use streaming DMA mode + +otherwise + use PIO transfer + +THANKS TO +--------- + +David Brownell and others for mentoring the development of this driver. + diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 7a75faeb0526..9ce1d01469b1 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -75,6 +75,14 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_PXA2XX + tristate "PXA2xx SSP SPI master" + depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL + help + This enables using a PXA2xx SSP port as a SPI master controller. + The driver can be configured to use any SSP port and additional + documentation can be found a Documentation/spi/pxa2xx. + # # Add new SPI master controllers in alphabetical order above this line # diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index c2c87e845abf..1bca5f95de25 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o # SPI master controller drivers (bus) obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o # ... add above this line ... # SPI protocol drivers (device/link on bus) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c new file mode 100644 index 000000000000..913e1aff0235 --- /dev/null +++ b/drivers/spi/pxa2xx_spi.c @@ -0,0 +1,1399 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +MODULE_AUTHOR("Stephen Street"); +MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller"); +MODULE_LICENSE("GPL"); + +#define MAX_BUSES 3 + +#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) +#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) +#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0) + +#define DEFINE_SSP_REG(reg, off) \ +static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \ +static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); } + +DEFINE_SSP_REG(SSCR0, 0x00) +DEFINE_SSP_REG(SSCR1, 0x04) +DEFINE_SSP_REG(SSSR, 0x08) +DEFINE_SSP_REG(SSITR, 0x0c) +DEFINE_SSP_REG(SSDR, 0x10) +DEFINE_SSP_REG(SSTO, 0x28) +DEFINE_SSP_REG(SSPSP, 0x2c) + +#define START_STATE ((void*)0) +#define RUNNING_STATE ((void*)1) +#define DONE_STATE ((void*)2) +#define ERROR_STATE ((void*)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +struct driver_data { + /* Driver model hookup */ + struct platform_device *pdev; + + /* SPI framework hookup */ + enum pxa_ssp_type ssp_type; + struct spi_master *master; + + /* PXA hookup */ + struct pxa2xx_spi_master *master_info; + + /* DMA setup stuff */ + int rx_channel; + int tx_channel; + u32 *null_dma_buf; + + /* SSP register addresses */ + void *ioaddr; + u32 ssdr_physical; + + /* SSP masks*/ + u32 dma_cr1; + u32 int_cr1; + u32 clear_sr; + u32 mask_sr; + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + int run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + struct spi_message* cur_msg; + struct spi_transfer* cur_transfer; + struct chip_data *cur_chip; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + size_t rx_map_len; + size_t tx_map_len; + int cs_change; + void (*write)(struct driver_data *drv_data); + void (*read)(struct driver_data *drv_data); + irqreturn_t (*transfer_handler)(struct driver_data *drv_data); + void (*cs_control)(u32 command); +}; + +struct chip_data { + u32 cr0; + u32 cr1; + u32 to; + u32 psp; + u32 timeout; + u8 n_bytes; + u32 dma_width; + u32 dma_burst_size; + u32 threshold; + u32 dma_threshold; + u8 enable_dma; + void (*write)(struct driver_data *drv_data); + void (*read)(struct driver_data *drv_data); + void (*cs_control)(u32 command); +}; + +static void pump_messages(void *data); + +static int flush(struct driver_data *drv_data) +{ + unsigned long limit = loops_per_jiffy << 1; + + void *reg = drv_data->ioaddr; + + do { + while (read_SSSR(reg) & SSSR_RNE) { + read_SSDR(reg); + } + } while ((read_SSSR(reg) & SSSR_BSY) && limit--); + write_SSSR(SSSR_ROR, reg); + + return limit; +} + +static void restore_state(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + /* Clear status and disable clock */ + write_SSSR(drv_data->clear_sr, reg); + write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg); + + /* Load the registers */ + write_SSCR1(drv_data->cur_chip->cr1, reg); + write_SSCR0(drv_data->cur_chip->cr0, reg); + if (drv_data->ssp_type != PXA25x_SSP) { + write_SSTO(0, reg); + write_SSPSP(drv_data->cur_chip->psp, reg); + } +} + +static void null_cs_control(u32 command) +{ +} + +static void null_writer(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + u8 n_bytes = drv_data->cur_chip->n_bytes; + + while ((read_SSSR(reg) & SSSR_TNF) + && (drv_data->tx < drv_data->tx_end)) { + write_SSDR(0, reg); + drv_data->tx += n_bytes; + } +} + +static void null_reader(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + u8 n_bytes = drv_data->cur_chip->n_bytes; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + read_SSDR(reg); + drv_data->rx += n_bytes; + } +} + +static void u8_writer(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_TNF) + && (drv_data->tx < drv_data->tx_end)) { + write_SSDR(*(u8 *)(drv_data->tx), reg); + ++drv_data->tx; + } +} + +static void u8_reader(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + *(u8 *)(drv_data->rx) = read_SSDR(reg); + ++drv_data->rx; + } +} + +static void u16_writer(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_TNF) + && (drv_data->tx < drv_data->tx_end)) { + write_SSDR(*(u16 *)(drv_data->tx), reg); + drv_data->tx += 2; + } +} + +static void u16_reader(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + *(u16 *)(drv_data->rx) = read_SSDR(reg); + drv_data->rx += 2; + } +} +static void u32_writer(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_TNF) + && (drv_data->tx < drv_data->tx_end)) { + write_SSDR(*(u16 *)(drv_data->tx), reg); + drv_data->tx += 4; + } +} + +static void u32_reader(struct driver_data *drv_data) +{ + void *reg = drv_data->ioaddr; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_data->rx < drv_data->rx_end)) { + *(u32 *)(drv_data->rx) = read_SSDR(reg); + drv_data->rx += 4; + } +} + +static void *next_transfer(struct driver_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct spi_transfer *trans = drv_data->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + drv_data->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +static int map_dma_buffers(struct driver_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct device *dev = &msg->spi->dev; + + if (!drv_data->cur_chip->enable_dma) + return 0; + + if (msg->is_dma_mapped) + return drv_data->rx_dma && drv_data->tx_dma; + + if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) + return 0; + + /* Modify setup if rx buffer is null */ + if (drv_data->rx == NULL) { + *drv_data->null_dma_buf = 0; + drv_data->rx = drv_data->null_dma_buf; + drv_data->rx_map_len = 4; + } else + drv_data->rx_map_len = drv_data->len; + + + /* Modify setup if tx buffer is null */ + if (drv_data->tx == NULL) { + *drv_data->null_dma_buf = 0; + drv_data->tx = drv_data->null_dma_buf; + drv_data->tx_map_len = 4; + } else + drv_data->tx_map_len = drv_data->len; + + /* Stream map the rx buffer */ + drv_data->rx_dma = dma_map_single(dev, drv_data->rx, + drv_data->rx_map_len, + DMA_FROM_DEVICE); + if (dma_mapping_error(drv_data->rx_dma)) + return 0; + + /* Stream map the tx buffer */ + drv_data->tx_dma = dma_map_single(dev, drv_data->tx, + drv_data->tx_map_len, + DMA_TO_DEVICE); + + if (dma_mapping_error(drv_data->tx_dma)) { + dma_unmap_single(dev, drv_data->rx_dma, + drv_data->rx_map_len, DMA_FROM_DEVICE); + return 0; + } + + return 1; +} + +static void unmap_dma_buffers(struct driver_data *drv_data) +{ + struct device *dev; + + if (!drv_data->dma_mapped) + return; + + if (!drv_data->cur_msg->is_dma_mapped) { + dev = &drv_data->cur_msg->spi->dev; + dma_unmap_single(dev, drv_data->rx_dma, + drv_data->rx_map_len, DMA_FROM_DEVICE); + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); + } + + drv_data->dma_mapped = 0; +} + +/* caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct spi_message *message, struct driver_data *drv_data) +{ + struct spi_transfer* last_transfer; + + last_transfer = list_entry(message->transfers.prev, + struct spi_transfer, + transfer_list); + + if (!last_transfer->cs_change) + drv_data->cs_control(PXA2XX_CS_DEASSERT); + + message->state = NULL; + if (message->complete) + message->complete(message->context); + + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + queue_work(drv_data->workqueue, &drv_data->pump_messages); +} + +static int wait_ssp_rx_stall(void *ioaddr) +{ + unsigned long limit = loops_per_jiffy << 1; + + while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--) + cpu_relax(); + + return limit; +} + +static int wait_dma_channel_stop(int channel) +{ + unsigned long limit = loops_per_jiffy << 1; + + while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--) + cpu_relax(); + + return limit; +} + +static void dma_handler(int channel, void *data, struct pt_regs *regs) +{ + struct driver_data *drv_data = data; + struct spi_message *msg = drv_data->cur_msg; + void *reg = drv_data->ioaddr; + u32 irq_status = DCSR(channel) & DMA_INT_MASK; + u32 trailing_sssr = 0; + + if (irq_status & DCSR_BUSERR) { + + /* Disable interrupts, clear status and reset DMA */ + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(0, reg); + write_SSSR(drv_data->clear_sr, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + + if (flush(drv_data) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: flush fail\n"); + + unmap_dma_buffers(drv_data); + + if (channel == drv_data->tx_channel) + dev_err(&drv_data->pdev->dev, + "dma_handler: bad bus address on " + "tx channel %d, source %x target = %x\n", + channel, DSADR(channel), DTADR(channel)); + else + dev_err(&drv_data->pdev->dev, + "dma_handler: bad bus address on " + "rx channel %d, source %x target = %x\n", + channel, DSADR(channel), DTADR(channel)); + + msg->state = ERROR_STATE; + tasklet_schedule(&drv_data->pump_transfers); + } + + /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */ + if ((drv_data->ssp_type == PXA25x_SSP) + && (channel == drv_data->tx_channel) + && (irq_status & DCSR_ENDINTR)) { + + /* Wait for rx to stall */ + if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: ssp rx stall failed\n"); + + /* Clear and disable interrupts on SSP and DMA channels*/ + write_SSSR(drv_data->clear_sr, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + if (wait_dma_channel_stop(drv_data->rx_channel) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: dma rx channel stop failed\n"); + + unmap_dma_buffers(drv_data); + + /* Read trailing bytes */ + /* Calculate number of trailing bytes, read them */ + trailing_sssr = read_SSSR(reg); + if ((trailing_sssr & 0xf008) != 0xf000) { + drv_data->rx = drv_data->rx_end - + (((trailing_sssr >> 12) & 0x0f) + 1); + drv_data->read(drv_data); + } + msg->actual_length += drv_data->len; + + /* Release chip select if requested, transfer delays are + * handled in pump_transfers */ + if (drv_data->cs_change) + drv_data->cs_control(PXA2XX_CS_DEASSERT); + + /* Move to next transfer */ + msg->state = next_transfer(drv_data); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + } +} + +static irqreturn_t dma_transfer(struct driver_data *drv_data) +{ + u32 irq_status; + u32 trailing_sssr = 0; + struct spi_message *msg = drv_data->cur_msg; + void *reg = drv_data->ioaddr; + + irq_status = read_SSSR(reg) & drv_data->mask_sr; + if (irq_status & SSSR_ROR) { + /* Clear and disable interrupts on SSP and DMA channels*/ + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(0, reg); + write_SSSR(drv_data->clear_sr, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + unmap_dma_buffers(drv_data); + + if (flush(drv_data) == 0) + dev_err(&drv_data->pdev->dev, + "dma_transfer: flush fail\n"); + + dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n"); + + drv_data->cur_msg->state = ERROR_STATE; + tasklet_schedule(&drv_data->pump_transfers); + + return IRQ_HANDLED; + } + + /* Check for false positive timeout */ + if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) { + write_SSSR(SSSR_TINT, reg); + return IRQ_HANDLED; + } + + if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) { + + /* Clear and disable interrupts on SSP and DMA channels*/ + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(0, reg); + write_SSSR(drv_data->clear_sr, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + + if (wait_dma_channel_stop(drv_data->rx_channel) == 0) + dev_err(&drv_data->pdev->dev, + "dma_transfer: dma rx channel stop failed\n"); + + if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) + dev_err(&drv_data->pdev->dev, + "dma_transfer: ssp rx stall failed\n"); + + unmap_dma_buffers(drv_data); + + /* Calculate number of trailing bytes, read them */ + trailing_sssr = read_SSSR(reg); + if ((trailing_sssr & 0xf008) != 0xf000) { + drv_data->rx = drv_data->rx_end - + (((trailing_sssr >> 12) & 0x0f) + 1); + drv_data->read(drv_data); + } + msg->actual_length += drv_data->len; + + /* Release chip select if requested, transfer delays are + * handled in pump_transfers */ + if (drv_data->cs_change) + drv_data->cs_control(PXA2XX_CS_DEASSERT); + + /* Move to next transfer */ + msg->state = next_transfer(drv_data); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + + return IRQ_HANDLED; + } + + /* Opps problem detected */ + return IRQ_NONE; +} + +static irqreturn_t interrupt_transfer(struct driver_data *drv_data) +{ + u32 irq_status; + struct spi_message *msg = drv_data->cur_msg; + void *reg = drv_data->ioaddr; + irqreturn_t handled = IRQ_NONE; + unsigned long limit = loops_per_jiffy << 1; + + while ((irq_status = (read_SSSR(reg) & drv_data->mask_sr))) { + + if (irq_status & SSSR_ROR) { + + /* Clear and disable interrupts */ + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(0, reg); + write_SSSR(drv_data->clear_sr, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); + + if (flush(drv_data) == 0) + dev_err(&drv_data->pdev->dev, + "interrupt_transfer: flush fail\n"); + + dev_warn(&drv_data->pdev->dev, + "interrupt_transfer: fifo overun\n"); + + msg->state = ERROR_STATE; + tasklet_schedule(&drv_data->pump_transfers); + + return IRQ_HANDLED; + } + + /* Look for false positive timeout */ + if ((irq_status & SSSR_TINT) + && (drv_data->rx < drv_data->rx_end)) + write_SSSR(SSSR_TINT, reg); + + /* Pump data */ + drv_data->read(drv_data); + drv_data->write(drv_data); + + if (drv_data->tx == drv_data->tx_end) { + /* Disable tx interrupt */ + write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg); + + /* PXA25x_SSP has no timeout, read trailing bytes */ + if (drv_data->ssp_type == PXA25x_SSP) { + while ((read_SSSR(reg) & SSSR_BSY) && limit--) + drv_data->read(drv_data); + + if (limit == 0) + dev_err(&drv_data->pdev->dev, + "interrupt_transfer: " + "trailing byte read failed\n"); + } + } + + if ((irq_status & SSSR_TINT) + || (drv_data->rx == drv_data->rx_end)) { + + /* Clear timeout */ + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(0, reg); + write_SSSR(drv_data->clear_sr, reg); + write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); + + /* Update total byte transfered */ + msg->actual_length += drv_data->len; + + /* Release chip select if requested, transfer delays are + * handled in pump_transfers */ + if (drv_data->cs_change) + drv_data->cs_control(PXA2XX_CS_DEASSERT); + + /* Move to next transfer */ + msg->state = next_transfer(drv_data); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + + return IRQ_HANDLED; + } + + /* We did something */ + handled = IRQ_HANDLED; + } + + return handled; +} + +static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct driver_data *drv_data = (struct driver_data *)dev_id; + + if (!drv_data->cur_msg) { + dev_err(&drv_data->pdev->dev, "bad message state " + "in interrupt handler\n"); + /* Never fail */ + return IRQ_HANDLED; + } + + return drv_data->transfer_handler(drv_data); +} + +static void pump_transfers(unsigned long data) +{ + struct driver_data *drv_data = (struct driver_data *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct chip_data *chip = NULL; + void *reg = drv_data->ioaddr; + + /* Get current state information */ + message = drv_data->cur_msg; + transfer = drv_data->cur_transfer; + chip = drv_data->cur_chip; + + /* Handle for abort */ + if (message->state == ERROR_STATE) { + message->status = -EIO; + giveback(message, drv_data); + return; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + giveback(message, drv_data); + return; + } + + /* Delay if requested at end of transfer*/ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + /* Setup the transfer state based on the type of transfer */ + if (flush(drv_data) == 0) { + dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); + message->status = -EIO; + giveback(message, drv_data); + return; + } + drv_data->cs_control = chip->cs_control; + drv_data->tx = (void *)transfer->tx_buf; + drv_data->tx_end = drv_data->tx + transfer->len; + drv_data->rx = transfer->rx_buf; + drv_data->rx_end = drv_data->rx + transfer->len; + drv_data->rx_dma = transfer->rx_dma; + drv_data->tx_dma = transfer->tx_dma; + drv_data->len = transfer->len; + drv_data->write = drv_data->tx ? chip->write : null_writer; + drv_data->read = drv_data->rx ? chip->read : null_reader; + drv_data->cs_change = transfer->cs_change; + message->state = RUNNING_STATE; + + /* Try to map dma buffer and do a dma transfer if successful */ + if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) { + + /* Ensure we have the correct interrupt handler */ + drv_data->transfer_handler = dma_transfer; + + /* Setup rx DMA Channel */ + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + DSADR(drv_data->rx_channel) = drv_data->ssdr_physical; + DTADR(drv_data->rx_channel) = drv_data->rx_dma; + if (drv_data->rx == drv_data->null_dma_buf) + /* No target address increment */ + DCMD(drv_data->rx_channel) = DCMD_FLOWSRC + | chip->dma_width + | chip->dma_burst_size + | drv_data->len; + else + DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR + | DCMD_FLOWSRC + | chip->dma_width + | chip->dma_burst_size + | drv_data->len; + + /* Setup tx DMA Channel */ + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DSADR(drv_data->tx_channel) = drv_data->tx_dma; + DTADR(drv_data->tx_channel) = drv_data->ssdr_physical; + if (drv_data->tx == drv_data->null_dma_buf) + /* No source address increment */ + DCMD(drv_data->tx_channel) = DCMD_FLOWTRG + | chip->dma_width + | chip->dma_burst_size + | drv_data->len; + else + DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR + | DCMD_FLOWTRG + | chip->dma_width + | chip->dma_burst_size + | drv_data->len; + + /* Enable dma end irqs on SSP to detect end of transfer */ + if (drv_data->ssp_type == PXA25x_SSP) + DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN; + + /* Fix me, need to handle cs polarity */ + drv_data->cs_control(PXA2XX_CS_ASSERT); + + /* Go baby, go */ + write_SSSR(drv_data->clear_sr, reg); + DCSR(drv_data->rx_channel) |= DCSR_RUN; + DCSR(drv_data->tx_channel) |= DCSR_RUN; + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(chip->timeout, reg); + write_SSCR1(chip->cr1 + | chip->dma_threshold + | drv_data->dma_cr1, + reg); + } else { + /* Ensure we have the correct interrupt handler */ + drv_data->transfer_handler = interrupt_transfer; + + /* Fix me, need to handle cs polarity */ + drv_data->cs_control(PXA2XX_CS_ASSERT); + + /* Go baby, go */ + write_SSSR(drv_data->clear_sr, reg); + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(chip->timeout, reg); + write_SSCR1(chip->cr1 + | chip->threshold + | drv_data->int_cr1, + reg); + } +} + +static void pump_messages(void *data) +{ + struct driver_data *drv_data = data; + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { + drv_data->busy = 0; + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (drv_data->cur_msg) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Extract head of queue */ + drv_data->cur_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + list_del_init(&drv_data->cur_msg->queue); + drv_data->busy = 1; + spin_unlock_irqrestore(&drv_data->lock, flags); + + /* Initial message state*/ + drv_data->cur_msg->state = START_STATE; + drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + + /* Setup the SSP using the per chip configuration */ + drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); + restore_state(drv_data); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&drv_data->pump_transfers); +} + +static int transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct driver_data *drv_data = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &drv_data->queue); + + if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return 0; +} + +static int setup(struct spi_device *spi) +{ + struct pxa2xx_spi_chip *chip_info = NULL; + struct chip_data *chip; + struct driver_data *drv_data = spi_master_get_devdata(spi->master); + unsigned int clk_div; + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + if (drv_data->ssp_type != PXA25x_SSP + && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) + return -EINVAL; + else if (spi->bits_per_word < 4 || spi->bits_per_word > 16) + return -EINVAL; + + /* Only alloc (or use chip_info) on first setup */ + chip = spi_get_ctldata(spi); + if (chip == NULL) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cs_control = null_cs_control; + chip->enable_dma = 0; + chip->timeout = 5; + chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1); + chip->dma_burst_size = drv_data->master_info->enable_dma ? + DCMD_BURST8 : 0; + + chip_info = spi->controller_data; + } + + /* chip_info isn't always needed */ + if (chip_info) { + if (chip_info->cs_control) + chip->cs_control = chip_info->cs_control; + + chip->timeout = (chip_info->timeout_microsecs * 10000) / 2712; + + chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold) + | SSCR1_TxTresh(chip_info->tx_threshold); + + chip->enable_dma = chip_info->dma_burst_size != 0 + && drv_data->master_info->enable_dma; + chip->dma_threshold = 0; + + if (chip->enable_dma) { + if (chip_info->dma_burst_size <= 8) { + chip->dma_threshold = SSCR1_RxTresh(8) + | SSCR1_TxTresh(8); + chip->dma_burst_size = DCMD_BURST8; + } else if (chip_info->dma_burst_size <= 16) { + chip->dma_threshold = SSCR1_RxTresh(16) + | SSCR1_TxTresh(16); + chip->dma_burst_size = DCMD_BURST16; + } else { + chip->dma_threshold = SSCR1_RxTresh(32) + | SSCR1_TxTresh(32); + chip->dma_burst_size = DCMD_BURST32; + } + } + + + if (chip_info->enable_loopback) + chip->cr1 = SSCR1_LBM; + } + + if (drv_data->ioaddr == SSP1_VIRT) + clk_div = SSP1_SerClkDiv(spi->max_speed_hz); + else if (drv_data->ioaddr == SSP2_VIRT) + clk_div = SSP2_SerClkDiv(spi->max_speed_hz); + else if (drv_data->ioaddr == SSP3_VIRT) + clk_div = SSP3_SerClkDiv(spi->max_speed_hz); + else + return -ENODEV; + + chip->cr0 = clk_div + | SSCR0_Motorola + | SSCR0_DataSize(spi->bits_per_word & 0x0f) + | SSCR0_SSE + | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); + chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4) + | (((spi->mode & SPI_CPOL) != 0) << 3); + + /* NOTE: PXA25x_SSP _could_ use external clocking ... */ + if (drv_data->ssp_type != PXA25x_SSP) + dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + spi->bits_per_word, + (CLOCK_SPEED_HZ) + / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), + spi->mode & 0x3); + else + dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + spi->bits_per_word, + (CLOCK_SPEED_HZ/2) + / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), + spi->mode & 0x3); + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = DCMD_WIDTH1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = DCMD_WIDTH2; + chip->read = u16_reader; + chip->write = u16_writer; + } else if (spi->bits_per_word <= 32) { + chip->cr0 |= SSCR0_EDSS; + chip->n_bytes = 4; + chip->dma_width = DCMD_WIDTH4; + chip->read = u32_reader; + chip->write = u32_writer; + } else { + dev_err(&spi->dev, "invalid wordsize\n"); + kfree(chip); + return -ENODEV; + } + + spi_set_ctldata(spi, chip); + + return 0; +} + +static void cleanup(const struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); + + kfree(chip); +} + +static int init_queue(struct driver_data *drv_data) +{ + INIT_LIST_HEAD(&drv_data->queue); + spin_lock_init(&drv_data->lock); + + drv_data->run = QUEUE_STOPPED; + drv_data->busy = 0; + + tasklet_init(&drv_data->pump_transfers, + pump_transfers, (unsigned long)drv_data); + + INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data); + drv_data->workqueue = create_singlethread_workqueue( + drv_data->master->cdev.dev->bus_id); + if (drv_data->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct driver_data *drv_data) +{ + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -EBUSY; + } + + drv_data->run = QUEUE_RUNNING; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + spin_unlock_irqrestore(&drv_data->lock, flags); + + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + return 0; +} + +static int stop_queue(struct driver_data *drv_data) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&drv_data->lock, flags); + + /* This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the drv_data->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead */ + drv_data->run = QUEUE_STOPPED; + while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { + spin_unlock_irqrestore(&drv_data->lock, flags); + msleep(10); + spin_lock_irqsave(&drv_data->lock, flags); + } + + if (!list_empty(&drv_data->queue) || drv_data->busy) + status = -EBUSY; + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return status; +} + +static int destroy_queue(struct driver_data *drv_data) +{ + int status; + + status = stop_queue(drv_data); + if (status != 0) + return status; + + destroy_workqueue(drv_data->workqueue); + + return 0; +} + +static int pxa2xx_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pxa2xx_spi_master *platform_info; + struct spi_master *master; + struct driver_data *drv_data = 0; + struct resource *memory_resource; + int irq; + int status = 0; + + platform_info = dev->platform_data; + + if (platform_info->ssp_type == SSP_UNDEFINED) { + dev_err(&pdev->dev, "undefined SSP\n"); + return -ENODEV; + } + + /* Allocate master with space for drv_data and null dma buffer */ + master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); + if (!master) { + dev_err(&pdev->dev, "can not alloc spi_master\n"); + return -ENOMEM; + } + drv_data = spi_master_get_devdata(master); + drv_data->master = master; + drv_data->master_info = platform_info; + drv_data->pdev = pdev; + + master->bus_num = pdev->id; + master->num_chipselect = platform_info->num_chipselect; + master->cleanup = cleanup; + master->setup = setup; + master->transfer = transfer; + + drv_data->ssp_type = platform_info->ssp_type; + drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + + sizeof(struct driver_data)), 8); + + /* Setup register addresses */ + memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!memory_resource) { + dev_err(&pdev->dev, "memory resources not defined\n"); + status = -ENODEV; + goto out_error_master_alloc; + } + + drv_data->ioaddr = (void *)io_p2v(memory_resource->start); + drv_data->ssdr_physical = memory_resource->start + 0x00000010; + if (platform_info->ssp_type == PXA25x_SSP) { + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; + drv_data->dma_cr1 = 0; + drv_data->clear_sr = SSSR_ROR; + drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; + } else { + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; + drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE; + drv_data->clear_sr = SSSR_ROR | SSSR_TINT; + drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; + } + + /* Attach to IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "irq resource not defined\n"); + status = -ENODEV; + goto out_error_master_alloc; + } + + status = request_irq(irq, ssp_int, SA_INTERRUPT, dev->bus_id, drv_data); + if (status < 0) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto out_error_master_alloc; + } + + /* Setup DMA if requested */ + drv_data->tx_channel = -1; + drv_data->rx_channel = -1; + if (platform_info->enable_dma) { + + /* Get two DMA channels (rx and tx) */ + drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx", + DMA_PRIO_HIGH, + dma_handler, + drv_data); + if (drv_data->rx_channel < 0) { + dev_err(dev, "problem (%d) requesting rx channel\n", + drv_data->rx_channel); + status = -ENODEV; + goto out_error_irq_alloc; + } + drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx", + DMA_PRIO_MEDIUM, + dma_handler, + drv_data); + if (drv_data->tx_channel < 0) { + dev_err(dev, "problem (%d) requesting tx channel\n", + drv_data->tx_channel); + status = -ENODEV; + goto out_error_dma_alloc; + } + + if (drv_data->ioaddr == SSP1_VIRT) { + DRCMRRXSSDR = DRCMR_MAPVLD + | drv_data->rx_channel; + DRCMRTXSSDR = DRCMR_MAPVLD + | drv_data->tx_channel; + } else if (drv_data->ioaddr == SSP2_VIRT) { + DRCMRRXSS2DR = DRCMR_MAPVLD + | drv_data->rx_channel; + DRCMRTXSS2DR = DRCMR_MAPVLD + | drv_data->tx_channel; + } else if (drv_data->ioaddr == SSP3_VIRT) { + DRCMRRXSS3DR = DRCMR_MAPVLD + | drv_data->rx_channel; + DRCMRTXSS3DR = DRCMR_MAPVLD + | drv_data->tx_channel; + } else { + dev_err(dev, "bad SSP type\n"); + goto out_error_dma_alloc; + } + } + + /* Enable SOC clock */ + pxa_set_cken(platform_info->clock_enable, 1); + + /* Load default SSP configuration */ + write_SSCR0(0, drv_data->ioaddr); + write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr); + write_SSCR0(SSCR0_SerClkDiv(2) + | SSCR0_Motorola + | SSCR0_DataSize(8), + drv_data->ioaddr); + if (drv_data->ssp_type != PXA25x_SSP) + write_SSTO(0, drv_data->ioaddr); + write_SSPSP(0, drv_data->ioaddr); + + /* Initial and start queue */ + status = init_queue(drv_data); + if (status != 0) { + dev_err(&pdev->dev, "problem initializing queue\n"); + goto out_error_clock_enabled; + } + status = start_queue(drv_data); + if (status != 0) { + dev_err(&pdev->dev, "problem starting queue\n"); + goto out_error_clock_enabled; + } + + /* Register with the SPI framework */ + platform_set_drvdata(pdev, drv_data); + status = spi_register_master(master); + if (status != 0) { + dev_err(&pdev->dev, "problem registering spi master\n"); + goto out_error_queue_alloc; + } + + return status; + +out_error_queue_alloc: + destroy_queue(drv_data); + +out_error_clock_enabled: + pxa_set_cken(platform_info->clock_enable, 0); + +out_error_dma_alloc: + if (drv_data->tx_channel != -1) + pxa_free_dma(drv_data->tx_channel); + if (drv_data->rx_channel != -1) + pxa_free_dma(drv_data->rx_channel); + +out_error_irq_alloc: + free_irq(irq, drv_data); + +out_error_master_alloc: + spi_master_put(master); + return status; +} + +static int pxa2xx_spi_remove(struct platform_device *pdev) +{ + struct driver_data *drv_data = platform_get_drvdata(pdev); + int irq; + int status = 0; + + if (!drv_data) + return 0; + + /* Remove the queue */ + status = destroy_queue(drv_data); + if (status != 0) + return status; + + /* Disable the SSP at the peripheral and SOC level */ + write_SSCR0(0, drv_data->ioaddr); + pxa_set_cken(drv_data->master_info->clock_enable, 0); + + /* Release DMA */ + if (drv_data->master_info->enable_dma) { + if (drv_data->ioaddr == SSP1_VIRT) { + DRCMRRXSSDR = 0; + DRCMRTXSSDR = 0; + } else if (drv_data->ioaddr == SSP2_VIRT) { + DRCMRRXSS2DR = 0; + DRCMRTXSS2DR = 0; + } else if (drv_data->ioaddr == SSP3_VIRT) { + DRCMRRXSS3DR = 0; + DRCMRTXSS3DR = 0; + } + pxa_free_dma(drv_data->tx_channel); + pxa_free_dma(drv_data->rx_channel); + } + + /* Release IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, drv_data); + + /* Disconnect from the SPI framework */ + spi_unregister_master(drv_data->master); + + /* Prevent double remove */ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void pxa2xx_spi_shutdown(struct platform_device *pdev) +{ + int status = 0; + + if ((status = pxa2xx_spi_remove(pdev)) != 0) + dev_err(&pdev->dev, "shutdown failed with %d\n", status); +} + +#ifdef CONFIG_PM +static int suspend_devices(struct device *dev, void *pm_message) +{ + pm_message_t *state = pm_message; + + if (dev->power.power_state.event != state->event) { + dev_warn(dev, "pm state does not match request\n"); + return -1; + } + + return 0; +} + +static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct driver_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + /* Check all childern for current power state */ + if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) { + dev_warn(&pdev->dev, "suspend aborted\n"); + return -1; + } + + status = stop_queue(drv_data); + if (status != 0) + return status; + write_SSCR0(0, drv_data->ioaddr); + pxa_set_cken(drv_data->master_info->clock_enable, 0); + + return 0; +} + +static int pxa2xx_spi_resume(struct platform_device *pdev) +{ + struct driver_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + /* Enable the SSP clock */ + pxa_set_cken(drv_data->master_info->clock_enable, 1); + + /* Start the queue running */ + status = start_queue(drv_data); + if (status != 0) { + dev_err(&pdev->dev, "problem starting queue (%d)\n", status); + return status; + } + + return 0; +} +#else +#define pxa2xx_spi_suspend NULL +#define pxa2xx_spi_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver driver = { + .driver = { + .name = "pxa2xx-spi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + }, + .probe = pxa2xx_spi_probe, + .remove = __devexit_p(pxa2xx_spi_remove), + .shutdown = pxa2xx_spi_shutdown, + .suspend = pxa2xx_spi_suspend, + .resume = pxa2xx_spi_resume, +}; + +static int __init pxa2xx_spi_init(void) +{ + platform_driver_register(&driver); + + return 0; +} +module_init(pxa2xx_spi_init); + +static void __exit pxa2xx_spi_exit(void) +{ + platform_driver_unregister(&driver); +} +module_exit(pxa2xx_spi_exit); diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h new file mode 100644 index 000000000000..1e70908b816f --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PXA2XX_SPI_H_ +#define PXA2XX_SPI_H_ + +#define PXA2XX_CS_ASSERT (0x01) +#define PXA2XX_CS_DEASSERT (0x02) + +#if defined(CONFIG_PXA25x) +#define CLOCK_SPEED_HZ 3686400 +#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) +#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#elif defined(CONFIG_PXA27x) +#define CLOCK_SPEED_HZ 13000000 +#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#endif + +#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) +#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) +#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) + +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, +}; + +/* device.platform_data for SSP controller devices */ +struct pxa2xx_spi_master { + enum pxa_ssp_type ssp_type; + u32 clock_enable; + u16 num_chipselect; + u8 enable_dma; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout_microsecs; + u8 enable_loopback; + void (*cs_control)(u32 command); +}; + +#endif /*PXA2XX_SPI_H_*/ -- cgit v1.2.3 From a9948b6194b46e489aa3b4d111d6dfd786c39c4b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 2 Apr 2006 10:37:40 -0800 Subject: [PATCH] SPI: spi bounce buffer has a minimum length Make sure that spi_write_then_read() can always handle at least 32 bytes of transfer (total, both directions), minimizing one portability issue. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 94f5e8ed83a7..1168ef015887 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -522,7 +522,8 @@ int spi_sync(struct spi_device *spi, struct spi_message *message) } EXPORT_SYMBOL_GPL(spi_sync); -#define SPI_BUFSIZ (SMP_CACHE_BYTES) +/* portable code must never pass more than 32 bytes */ +#define SPI_BUFSIZ max(32,SMP_CACHE_BYTES) static u8 *buf; -- cgit v1.2.3 From ff9f4771b5f017ee0f57629488b6cd7a6ef3d19b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 2 Apr 2006 16:06:35 -0500 Subject: [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it Renamed bitbang_transfer_setup to follow convention of other exported symbols from spi-bitbang. Exported spi_bitbang_setup_transfer to allow users of spi-bitbang to use the function in their own setup_transfer. Signed-off-by: Kumar Gala Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 10 ++++++---- include/linux/spi/spi_bitbang.h | 2 ++ 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 0525c99118c3..6c3da64d609a 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -138,8 +138,7 @@ static unsigned bitbang_txrx_32( return t->len - count; } -static int -bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) +int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t) { struct spi_bitbang_cs *cs = spi->controller_state; u8 bits_per_word; @@ -174,6 +173,7 @@ bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) return 0; } +EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer); /** * spi_bitbang_setup - default setup for per-word I/O loops @@ -203,7 +203,7 @@ int spi_bitbang_setup(struct spi_device *spi) if (!cs->txrx_word) return -EINVAL; - retval = bitbang_transfer_setup(spi, NULL); + retval = spi_bitbang_setup_transfer(spi, NULL); if (retval < 0) return retval; @@ -454,7 +454,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; if (!bitbang->master->setup) { - bitbang->setup_transfer = bitbang_transfer_setup; + if (!bitbang->setup_transfer) + bitbang->setup_transfer = + spi_bitbang_setup_transfer; bitbang->master->setup = spi_bitbang_setup; bitbang->master->cleanup = spi_bitbang_cleanup; } diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c954557b757c..16ce178f54d7 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -57,6 +57,8 @@ struct spi_bitbang { extern int spi_bitbang_setup(struct spi_device *spi); extern void spi_bitbang_cleanup(const struct spi_device *spi); extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); +extern int spi_bitbang_setup_transfer(struct spi_device *spi, + struct spi_transfer *t); /* start or stop queue processing */ extern int spi_bitbang_start(struct spi_bitbang *spi); -- cgit v1.2.3 From ccf77cc4af5b048e20cfd9327fcc286cb69c34cc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Apr 2006 15:46:22 -0700 Subject: [PATCH] SPI: devices can require LSB-first encodings Add spi_device hook for LSB-first word encoding, and update all the (in-tree) controller drivers to reject such devices. Eventually, some controller drivers will be updated to support lsb-first encodings on the wire; no current drivers need this. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 11 ++++++++++- include/linux/spi/spi.h | 7 +++++-- 2 files changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 6c3da64d609a..0f7f5c64391c 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -187,13 +187,22 @@ int spi_bitbang_setup(struct spi_device *spi) if (!spi->max_speed_hz) return -EINVAL; + bitbang = spi_master_get_devdata(spi->master); + + /* REVISIT: some systems will want to support devices using lsb-first + * bit encodings on the wire. In pure software that would be trivial, + * just bitbang_txrx_le_cphaX() routines shifting the other way, and + * some hardware controllers also have this support. + */ + if ((spi->mode & SPI_LSB_FIRST) != 0) + return -EINVAL; + if (!cs) { cs = kzalloc(sizeof *cs, SLAB_KERNEL); if (!cs) return -ENOMEM; spi->controller_state = cs; } - bitbang = spi_master_get_devdata(spi->master); if (!spi->bits_per_word) spi->bits_per_word = 8; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 082006714b85..77add901691d 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -35,10 +35,13 @@ extern struct bus_type spi_bus_type; * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. + * The "active low" default for chipselect mode can be overridden, + * as can the "MSB first" default for each word in a transfer. * @bits_per_word: Data transfers involve one or more words; word sizes * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). - * This may be changed by the device's driver. + * This may be changed by the device's driver, or left at the + * default (0) indicating protocol words are eight bit bytes. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. @@ -67,6 +70,7 @@ struct spi_device { #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) #define SPI_CS_HIGH 0x04 /* chipselect active high? */ +#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ u8 bits_per_word; int irq; void *controller_state; @@ -75,7 +79,6 @@ struct spi_device { // likely need more hooks for more protocol options affecting how // the controller talks to each chip, like: - // - bit order (default is wordwise msb-first) // - memory packing (12 bit samples into low bits, others zeroed) // - priority // - drop chipselect after each word -- cgit v1.2.3 From a020ed7521a9737bcf3e34eb880867c60c3c68d0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Apr 2006 15:49:04 -0700 Subject: [PATCH] SPI: busnum == 0 needs to work We need to be able to have a "SPI bus 0" matching chip numbering; but that number was wrongly used to flag dynamic allocation of a bus number. This patch resolves that issue; now negative numbers trigger dynamic alloc. It also updates the how-to-write-a-controller-driver overview to mention this stuff. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/spi/spi-summary | 34 +++++++++++++++++++++++++++++++++- drivers/spi/spi.c | 4 ++-- include/linux/spi/spi.h | 6 +++--- 3 files changed, 38 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index a5ffba33a351..068732d32276 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -414,7 +414,33 @@ to get the driver-private data allocated for that device. The driver will initialize the fields of that spi_master, including the bus number (maybe the same as the platform device ID) and three methods used to interact with the SPI core and SPI protocol drivers. It will -also initialize its own internal state. +also initialize its own internal state. (See below about bus numbering +and those methods.) + +After you initialize the spi_master, then use spi_register_master() to +publish it to the rest of the system. At that time, device nodes for +the controller and any predeclared spi devices will be made available, +and the driver model core will take care of binding them to drivers. + +If you need to remove your SPI controller driver, spi_unregister_master() +will reverse the effect of spi_register_master(). + + +BUS NUMBERING + +Bus numbering is important, since that's how Linux identifies a given +SPI bus (shared SCK, MOSI, MISO). Valid bus numbers start at zero. On +SOC systems, the bus numbers should match the numbers defined by the chip +manufacturer. For example, hardware controller SPI2 would be bus number 2, +and spi_board_info for devices connected to it would use that number. + +If you don't have such hardware-assigned bus number, and for some reason +you can't just assign them, then provide a negative bus number. That will +then be replaced by a dynamically assigned number. You'd then need to treat +this as a non-static configuration (see above). + + +SPI MASTER METHODS master->setup(struct spi_device *spi) This sets up the device clock rate, SPI mode, and word sizes. @@ -431,6 +457,9 @@ also initialize its own internal state. state it dynamically associates with that device. If you do that, be sure to provide the cleanup() method to free that state. + +SPI MESSAGE QUEUE + The bulk of the driver will be managing the I/O queue fed by transfer(). That queue could be purely conceptual. For example, a driver used only @@ -440,6 +469,9 @@ But the queue will probably be very real, using message->queue, PIO, often DMA (especially if the root filesystem is in SPI flash), and execution contexts like IRQ handlers, tasklets, or workqueues (such as keventd). Your driver can be as fancy, or as simple, as you need. +Such a transfer() method would normally just add the message to a +queue, and then start some asynchronous transfer engine (unless it's +already running). THANKS TO diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 1168ef015887..7a3f733051e9 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master); int __init_or_module spi_register_master(struct spi_master *master) { - static atomic_t dyn_bus_id = ATOMIC_INIT(0); + static atomic_t dyn_bus_id = ATOMIC_INIT((1<<16) - 1); struct device *dev = master->cdev.dev; int status = -ENODEV; int dynamic = 0; @@ -404,7 +404,7 @@ spi_register_master(struct spi_master *master) return -ENODEV; /* convention: dynamically assigned bus IDs count down from the max */ - if (master->bus_num == 0) { + if (master->bus_num < 0) { master->bus_num = atomic_dec_return(&dyn_bus_id); dynamic = 1; } diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 77add901691d..e928c0dcc297 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -172,13 +172,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) struct spi_master { struct class_device cdev; - /* other than zero (== assign one dynamically), bus_num is fully + /* other than negative (== assign one dynamically), bus_num is fully * board-specific. usually that simplifies to being SOC-specific. - * example: one SOC has three SPI controllers, numbered 1..3, + * example: one SOC has three SPI controllers, numbered 0..2, * and one board's schematics might show it using SPI-2. software * would normally use bus_num=2 for that controller. */ - u16 bus_num; + s16 bus_num; /* chipselects will be integral to many controllers; some others * might use board-specific GPIOs. -- cgit v1.2.3 From 9708c121c38fe864eb6f5a119f7525729686e095 Mon Sep 17 00:00:00 2001 From: Stephen Street Date: Tue, 28 Mar 2006 14:05:23 -0800 Subject: [PATCH] spi: Update to PXA2xx SPI Driver Fix two outstanding issues with the pxa2xx_spi driver: 1) Bad cast in the function u32_writer. Thanks to Henrik Bechmann 2) Adds support for per transfer changes to speed and bits per word Signed-off-by: Stephen Street Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/spi/pxa2xx_spi.c | 82 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 75 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 913e1aff0235..596bf820b70c 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -120,6 +120,8 @@ struct driver_data { dma_addr_t tx_dma; size_t rx_map_len; size_t tx_map_len; + u8 n_bytes; + u32 dma_width; int cs_change; void (*write)(struct driver_data *drv_data); void (*read)(struct driver_data *drv_data); @@ -139,6 +141,8 @@ struct chip_data { u32 threshold; u32 dma_threshold; u8 enable_dma; + u8 bits_per_word; + u32 speed_hz; void (*write)(struct driver_data *drv_data); void (*read)(struct driver_data *drv_data); void (*cs_control)(u32 command); @@ -186,7 +190,7 @@ static void null_cs_control(u32 command) static void null_writer(struct driver_data *drv_data) { void *reg = drv_data->ioaddr; - u8 n_bytes = drv_data->cur_chip->n_bytes; + u8 n_bytes = drv_data->n_bytes; while ((read_SSSR(reg) & SSSR_TNF) && (drv_data->tx < drv_data->tx_end)) { @@ -198,7 +202,7 @@ static void null_writer(struct driver_data *drv_data) static void null_reader(struct driver_data *drv_data) { void *reg = drv_data->ioaddr; - u8 n_bytes = drv_data->cur_chip->n_bytes; + u8 n_bytes = drv_data->n_bytes; while ((read_SSSR(reg) & SSSR_RNE) && (drv_data->rx < drv_data->rx_end)) { @@ -256,7 +260,7 @@ static void u32_writer(struct driver_data *drv_data) while ((read_SSSR(reg) & SSSR_TNF) && (drv_data->tx < drv_data->tx_end)) { - write_SSDR(*(u16 *)(drv_data->tx), reg); + write_SSDR(*(u32 *)(drv_data->tx), reg); drv_data->tx += 4; } } @@ -677,6 +681,10 @@ static void pump_transfers(unsigned long data) struct spi_transfer *previous = NULL; struct chip_data *chip = NULL; void *reg = drv_data->ioaddr; + u32 clk_div = 0; + u8 bits = 0; + u32 speed = 0; + u32 cr0; /* Get current state information */ message = drv_data->cur_msg; @@ -713,6 +721,8 @@ static void pump_transfers(unsigned long data) giveback(message, drv_data); return; } + drv_data->n_bytes = chip->n_bytes; + drv_data->dma_width = chip->dma_width; drv_data->cs_control = chip->cs_control; drv_data->tx = (void *)transfer->tx_buf; drv_data->tx_end = drv_data->tx + transfer->len; @@ -724,6 +734,62 @@ static void pump_transfers(unsigned long data) drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; drv_data->cs_change = transfer->cs_change; + + /* Change speed and bit per word on a per transfer */ + if (transfer->speed_hz || transfer->bits_per_word) { + + /* Disable clock */ + write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg); + cr0 = chip->cr0; + bits = chip->bits_per_word; + speed = chip->speed_hz; + + if (transfer->speed_hz) + speed = transfer->speed_hz; + + if (transfer->bits_per_word) + bits = transfer->bits_per_word; + + if (reg == SSP1_VIRT) + clk_div = SSP1_SerClkDiv(speed); + else if (reg == SSP2_VIRT) + clk_div = SSP2_SerClkDiv(speed); + else if (reg == SSP3_VIRT) + clk_div = SSP3_SerClkDiv(speed); + + if (bits <= 8) { + drv_data->n_bytes = 1; + drv_data->dma_width = DCMD_WIDTH1; + drv_data->read = drv_data->read != null_reader ? + u8_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u8_writer : null_writer; + } else if (bits <= 16) { + drv_data->n_bytes = 2; + drv_data->dma_width = DCMD_WIDTH2; + drv_data->read = drv_data->read != null_reader ? + u16_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u16_writer : null_writer; + } else if (bits <= 32) { + drv_data->n_bytes = 4; + drv_data->dma_width = DCMD_WIDTH4; + drv_data->read = drv_data->read != null_reader ? + u32_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u32_writer : null_writer; + } + + cr0 = clk_div + | SSCR0_Motorola + | SSCR0_DataSize(bits & 0x0f) + | SSCR0_SSE + | (bits > 16 ? SSCR0_EDSS : 0); + + /* Start it back up */ + write_SSCR0(cr0, reg); + } + message->state = RUNNING_STATE; /* Try to map dma buffer and do a dma transfer if successful */ @@ -739,13 +805,13 @@ static void pump_transfers(unsigned long data) if (drv_data->rx == drv_data->null_dma_buf) /* No target address increment */ DCMD(drv_data->rx_channel) = DCMD_FLOWSRC - | chip->dma_width + | drv_data->dma_width | chip->dma_burst_size | drv_data->len; else DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR | DCMD_FLOWSRC - | chip->dma_width + | drv_data->dma_width | chip->dma_burst_size | drv_data->len; @@ -756,13 +822,13 @@ static void pump_transfers(unsigned long data) if (drv_data->tx == drv_data->null_dma_buf) /* No source address increment */ DCMD(drv_data->tx_channel) = DCMD_FLOWTRG - | chip->dma_width + | drv_data->dma_width | chip->dma_burst_size | drv_data->len; else DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR | DCMD_FLOWTRG - | chip->dma_width + | drv_data->dma_width | chip->dma_burst_size | drv_data->len; @@ -943,6 +1009,7 @@ static int setup(struct spi_device *spi) clk_div = SSP3_SerClkDiv(spi->max_speed_hz); else return -ENODEV; + chip->speed_hz = spi->max_speed_hz; chip->cr0 = clk_div | SSCR0_Motorola @@ -987,6 +1054,7 @@ static int setup(struct spi_device *spi) kfree(chip); return -ENODEV; } + chip->bits_per_word = spi->bits_per_word; spi_set_ctldata(spi, chip); -- cgit v1.2.3 From 1e316d7566b63767aa18902235c719e9e95465d0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 6 Apr 2006 22:25:56 -0700 Subject: [PATCH] SPI: spi_bitbang: clocking fixes This fixes two problems triggered by the MMC stack updating clocks: - SPI masters driver should accept a max clock speed of zero; that's one convention for marking idle devices. (Presumably that helps controllers that don't autogate clocks to "off" when not in use.) - There are more than 1000 nanoseconds per millisecond; setting the clock down to 125 KHz now works properly. Showing once again that Zero (http://en.wikipedia.org/wiki/Zero) is still an inexhaustible number of bugs. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 0f7f5c64391c..dd2f950b21a7 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -167,9 +167,11 @@ int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t) /* nsecs = (clock period)/2 */ if (!hz) hz = spi->max_speed_hz; - cs->nsecs = (1000000000/2) / hz; - if (cs->nsecs > MAX_UDELAY_MS * 1000) - return -EINVAL; + if (hz) { + cs->nsecs = (1000000000/2) / hz; + if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000)) + return -EINVAL; + } return 0; } @@ -184,9 +186,6 @@ int spi_bitbang_setup(struct spi_device *spi) struct spi_bitbang *bitbang; int retval; - if (!spi->max_speed_hz) - return -EINVAL; - bitbang = spi_master_get_devdata(spi->master); /* REVISIT: some systems will want to support devices using lsb-first @@ -216,7 +215,7 @@ int spi_bitbang_setup(struct spi_device *spi) if (retval < 0) return retval; - dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n", + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA), spi->bits_per_word, 2 * cs->nsecs); @@ -405,6 +404,7 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) { struct spi_bitbang *bitbang; unsigned long flags; + int status = 0; m->actual_length = 0; m->status = -EINPROGRESS; @@ -414,11 +414,15 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) return -ESHUTDOWN; spin_lock_irqsave(&bitbang->lock, flags); - list_add_tail(&m->queue, &bitbang->queue); - queue_work(bitbang->workqueue, &bitbang->work); + if (!spi->max_speed_hz) + status = -ENETDOWN; + else { + list_add_tail(&m->queue, &bitbang->queue); + queue_work(bitbang->workqueue, &bitbang->work); + } spin_unlock_irqrestore(&bitbang->lock, flags); - return 0; + return status; } EXPORT_SYMBOL_GPL(spi_bitbang_transfer); -- cgit v1.2.3 From 1db76c14d215c8b26024dd532de3dcaf66ea30f7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 17 May 2006 07:48:07 -0700 Subject: IB/mthca: Make fw_cmd_doorbell default to 0 Setting fw_cmd_doorbell allows FW command to be queued using posted writes instead of requiring polling on a "go" bit, so it should be a performance boost. However, the option causes problems with at least some device/firmware combinations, so set the default to 0 until we understand what's going on better. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 1985b5dfa481..798e13e14faf 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -182,7 +182,7 @@ struct mthca_cmd_context { u8 status; }; -static int fw_cmd_doorbell = 1; +static int fw_cmd_doorbell = 0; module_param(fw_cmd_doorbell, int, 0644); MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero " "(and supported by FW)"); -- cgit v1.2.3 From e65810566f3e613d9baa5512b8724ebde42ace0f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 17 May 2006 09:13:21 -0700 Subject: IB/srp: Don't wait for disconnection if sending DREQ fails Sending a DREQ may fail, for example because the remote target has already broken the connection. If so, then SRP should not wait for the disconnection to complete, because it never will. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index c32ce4348e1b..351d66f3250d 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -340,7 +340,10 @@ static void srp_disconnect_target(struct srp_target_port *target) /* XXX should send SRP_I_LOGOUT request */ init_completion(&target->done); - ib_send_cm_dreq(target->cm_id, NULL, 0); + if (ib_send_cm_dreq(target->cm_id, NULL, 0)) { + printk(KERN_DEBUG PFX "Sending CM DREQ failed\n"); + return; + } wait_for_completion(&target->done); } -- cgit v1.2.3 From ec2d7208494fe599a5ff13b40a0a20c9881f2737 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 17 May 2006 09:16:03 -0700 Subject: IB/srp: Get rid of extra scsi_host_put()s if reconnection fails If a reconnection attempt fails, then SRP does two scsi_host_put()s. This is a historical relic from an earlier version of the driver that took a reference on the scsi_host before trying to reconnect, so get rid of the extra scsi_host_put(). Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 351d66f3250d..0f24f04cb60e 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -354,7 +354,6 @@ static void srp_remove_work(void *target_ptr) spin_lock_irq(target->scsi_host->host_lock); if (target->state != SRP_TARGET_DEAD) { spin_unlock_irq(target->scsi_host->host_lock); - scsi_host_put(target->scsi_host); return; } target->state = SRP_TARGET_REMOVED; @@ -368,8 +367,6 @@ static void srp_remove_work(void *target_ptr) ib_destroy_cm_id(target->cm_id); srp_free_target_ib(target); scsi_host_put(target->scsi_host); - /* And another put to really free the target port... */ - scsi_host_put(target->scsi_host); } static int srp_connect_target(struct srp_target_port *target) -- cgit v1.2.3 From 093beac189e4295d968f0d38787b46f76cb0eaaa Mon Sep 17 00:00:00 2001 From: Ishai Rabinovitz Date: Wed, 17 May 2006 09:20:48 -0700 Subject: IB/srp: Complete correct SCSI commands on device reset When flushing out queued commands after a successful device reset, make sure that SRP completes the right commands, instead of calling scsi_done on the command passed into the device reset handler over and over. Signed-off-by: Ishai Rabinovitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 0f24f04cb60e..9cbdffa08dc2 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -1241,7 +1241,7 @@ static int srp_reset_device(struct scsi_cmnd *scmnd) list_for_each_entry_safe(req, tmp, &target->req_queue, list) if (req->scmnd->device == scmnd->device) { req->scmnd->result = DID_RESET << 16; - scmnd->scsi_done(scmnd); + req->scmnd->scsi_done(req->scmnd); srp_remove_req(target, req); } -- cgit v1.2.3 From 24d3bf884e093f9de52d31c97187f4b9b4ad7dcb Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 15 May 2006 22:04:59 +0200 Subject: [PATCH] sbp2: consolidate workarounds Grand unification of the three types of workarounds we have so far. The "skip mode page 8" workaround is now limited to devices which pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no longer enabled for Initio bridges. Patch update in anticipation of more workarounds: - Add module parameter "workarounds". - Deprecate parameter "force_inquiry_hack". - Compose the blacklist of a compound type for better readability and extensibility. - Remove a now unused #define. Signed-off-by: Stefan Richter Signed-off-by: Linus Torvalds --- Documentation/feature-removal-schedule.txt | 9 ++ drivers/ieee1394/sbp2.c | 152 +++++++++++++++++------------ drivers/ieee1394/sbp2.h | 16 ++- 3 files changed, 106 insertions(+), 71 deletions(-) (limited to 'drivers') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 421bcfff6ad2..43ab119963d5 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -57,6 +57,15 @@ Who: Jody McIntyre --------------------------- +What: sbp2: module parameter "force_inquiry_hack" +When: July 2006 +Why: Superceded by parameter "workarounds". Both parameters are meant to be + used ad-hoc and for single devices only, i.e. not in modprobe.conf, + therefore the impact of this feature replacement should be low. +Who: Stefan Richter + +--------------------------- + What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. When: July 2006 Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6 diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index f4206604db03..ecd59ef8c8a3 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -117,7 +118,8 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default */ static int max_sectors = SBP2_MAX_SECTORS; module_param(max_sectors, int, 0444); -MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)"); +MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = " + __stringify(SBP2_MAX_SECTORS) ")"); /* * Exclusive login to sbp2 device? In most cases, the sbp2 driver should @@ -135,18 +137,33 @@ module_param(exclusive_login, int, 0644); MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"); /* - * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on - * if your sbp2 device is not properly handling the SCSI inquiry command. - * This hack makes the inquiry look more like a typical MS Windows inquiry - * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8. + * If any of the following workarounds is required for your device to work, + * please submit the kernel messages logged by sbp2 to the linux1394-devel + * mailing list. * - * If force_inquiry_hack=1 is required for your device to work, - * please submit the logged sbp2_firmware_revision value of this device to - * the linux1394-devel mailing list. + * - 128kB max transfer + * Limit transfer size. Necessary for some old bridges. + * + * - 36 byte inquiry + * When scsi_mod probes the device, let the inquiry command look like that + * from MS Windows. + * + * - skip mode page 8 + * Suppress sending of mode_sense for mode page 8 if the device pretends to + * support the SCSI Primary Block commands instead of Reduced Block Commands. */ +static int sbp2_default_workarounds; +module_param_named(workarounds, sbp2_default_workarounds, int, 0644); +MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" + ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS) + ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36) + ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8) + ", or a combination)"); + +/* legacy parameter */ static int force_inquiry_hack; module_param(force_inquiry_hack, int, 0644); -MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)"); +MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'"); /* * Export information about protocols/devices supported by this driver. @@ -266,14 +283,29 @@ static struct hpsb_protocol_driver sbp2_driver = { }; /* - * List of device firmwares that require the inquiry hack. - * Yields a few false positives but did not break other devices so far. + * List of devices with known bugs. + * + * The firmware_revision field, masked with 0xffff00, is the best indicator + * for the type of bridge chip of a device. It yields a few false positives + * but this did not break correctly behaving devices so far. */ -static u32 sbp2_broken_inquiry_list[] = { - 0x00002800, /* Stefan Richter */ - /* DViCO Momobay CX-1 */ - 0x00000200 /* Andreas Plesch */ - /* QPS Fire DVDBurner */ +static const struct { + u32 firmware_revision; + unsigned workarounds; +} sbp2_workarounds_table[] = { + /* TSB42AA9 */ { + .firmware_revision = 0x002800, + .workarounds = SBP2_WORKAROUND_INQUIRY_36 | + SBP2_WORKAROUND_MODE_SENSE_8, + }, + /* Initio bridges, actually only needed for some older ones */ { + .firmware_revision = 0x000200, + .workarounds = SBP2_WORKAROUND_INQUIRY_36, + }, + /* Symbios bridge */ { + .firmware_revision = 0xa0b800, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + } }; /************************************** @@ -1450,7 +1482,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, struct csr1212_dentry *dentry; u64 management_agent_addr; u32 command_set_spec_id, command_set, unit_characteristics, - firmware_revision, workarounds; + firmware_revision; + unsigned workarounds; int i; SBP2_DEBUG_ENTER(); @@ -1506,12 +1539,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, case SBP2_FIRMWARE_REVISION_KEY: /* Firmware revision */ firmware_revision = kv->value.immediate; - if (force_inquiry_hack) - SBP2_INFO("sbp2_firmware_revision = %x", - (unsigned int)firmware_revision); - else - SBP2_DEBUG("sbp2_firmware_revision = %x", - (unsigned int)firmware_revision); + SBP2_DEBUG("sbp2_firmware_revision = %x", + (unsigned int)firmware_revision); break; default: @@ -1519,42 +1548,37 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, } } - /* This is the start of our broken device checking. We try to hack - * around oddities and known defects. */ - workarounds = 0x0; + workarounds = sbp2_default_workarounds; + if (force_inquiry_hack) { + SBP2_WARN("force_inquiry_hack is deprecated. " + "Use parameter 'workarounds' instead."); + workarounds |= SBP2_WORKAROUND_INQUIRY_36; + } - /* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a - * bridge with 128KB max transfer size limitation. For sanity, we - * only voice this when the current max_sectors setting - * exceeds the 128k limit. By default, that is not the case. - * - * It would be really nice if we could detect this before the scsi - * host gets initialized. That way we can down-force the - * max_sectors to account for it. That is not currently - * possible. */ - if ((firmware_revision & 0xffff00) == - SBP2_128KB_BROKEN_FIRMWARE && - (max_sectors * 512) > (128*1024)) { - SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.", - NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid)); - SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!", - max_sectors); - workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER; - } - - /* Check for a blacklisted set of devices that require us to force - * a 36 byte host inquiry. This can be overriden as a module param - * (to force all hosts). */ - for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) { - if ((firmware_revision & 0xffff00) == - sbp2_broken_inquiry_list[i]) { - SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround", - NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid)); - workarounds |= SBP2_BREAKAGE_INQUIRY_HACK; - break; /* No need to continue. */ - } + for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) { + if (sbp2_workarounds_table[i].firmware_revision != + (firmware_revision & 0xffff00)) + continue; + workarounds |= sbp2_workarounds_table[i].workarounds; + break; } + if (workarounds) + SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": " + "0x%x (firmware_revision 0x%x)", + NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), + workarounds, firmware_revision); + + /* We would need one SCSI host template for each target to adjust + * max_sectors on the fly, therefore warn only. */ + if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS && + (max_sectors * 512) > (128 * 1024)) + SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB " + "max transfer size. WARNING: Current max_sectors " + "setting is larger than 128KB (%d sectors)", + NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), + max_sectors); + /* If this is a logical unit directory entry, process the parent * to get the values. */ if (ud->flags & UNIT_DIRECTORY_LUN_DIRECTORY) { @@ -2447,19 +2471,23 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev) scsi_id->sdev = sdev; - if (force_inquiry_hack || - scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) { + if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36) sdev->inquiry_len = 36; - sdev->skip_ms_page_8 = 1; - } return 0; } static int sbp2scsi_slave_configure(struct scsi_device *sdev) { + struct scsi_id_instance_data *scsi_id = + (struct scsi_id_instance_data *)sdev->host->hostdata[0]; + blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; + + if (sdev->type == TYPE_DISK && + scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8) + sdev->skip_ms_page_8 = 1; return 0; } @@ -2603,7 +2631,9 @@ static int sbp2_module_init(void) scsi_driver_template.cmd_per_lun = 1; } - /* Set max sectors (module load option). Default is 255 sectors. */ + if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS && + (max_sectors * 512) > (128 * 1024)) + max_sectors = 128 * 1024 / 512; scsi_driver_template.max_sectors = max_sectors; /* Register our high level driver with 1394 stack */ diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index e2d357a9ea3a..e40caf5d61ac 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -226,11 +226,6 @@ struct sbp2_status_block { #define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e #define SBP2_SW_VERSION_ENTRY 0x00010483 -/* - * Other misc defines - */ -#define SBP2_128KB_BROKEN_FIRMWARE 0xa0b800 - /* * SCSI specific stuff */ @@ -239,6 +234,11 @@ struct sbp2_status_block { #define SBP2_MAX_SECTORS 255 /* Max sectors supported */ #define SBP2_MAX_CMDS 8 /* This should be safe */ +/* Flags for detected oddities and brokeness */ +#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 +#define SBP2_WORKAROUND_INQUIRY_36 0x2 +#define SBP2_WORKAROUND_MODE_SENSE_8 0x4 + /* This is the two dma types we use for cmd_dma below */ enum cmd_dma_types { CMD_DMA_NONE, @@ -268,10 +268,6 @@ struct sbp2_command_info { }; -/* A list of flags for detected oddities and brokeness. */ -#define SBP2_BREAKAGE_128K_MAX_TRANSFER 0x1 -#define SBP2_BREAKAGE_INQUIRY_HACK 0x2 - struct sbp2scsi_host_info; /* @@ -345,7 +341,7 @@ struct scsi_id_instance_data { struct Scsi_Host *scsi_host; /* Device specific workarounds/brokeness */ - u32 workarounds; + unsigned workarounds; }; /* Sbp2 host data structure (one per IEEE1394 host) */ -- cgit v1.2.3 From e9a1c52c7b19d10342226c12f170d7ab644427e2 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 15 May 2006 22:06:37 +0200 Subject: [PATCH] sbp2: add read_capacity workaround for iPod Apple decided to copy some USB stupidity over to FireWire. The sector number returned by iPods from read_capacity is one too many. This may cause I/O errors, especially if the kernel is configured for EFI partition support. We use the same workaround as usb-storage but have to check for different model IDs. http://marc.theaimsgroup.com/?t=114233262300001 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409 Acknowledgements: Diagnosis and therapy by Mathieu Chouquet-Stringer , additional data about affected and unaffected Apple hardware from Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon. Signed-off-by: Stefan Richter Signed-off-by: Linus Torvalds --- drivers/ieee1394/sbp2.c | 49 +++++++++++++++++++++++++++++++++++++++++++++---- drivers/ieee1394/sbp2.h | 1 + 2 files changed, 46 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ecd59ef8c8a3..09e9291f1848 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -151,6 +151,11 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)" * - skip mode page 8 * Suppress sending of mode_sense for mode page 8 if the device pretends to * support the SCSI Primary Block commands instead of Reduced Block Commands. + * + * - fix capacity + * Tell sd_mod to correct the last sector number reported by read_capacity. + * Avoids access beyond actual disk limits on devices with an off-by-one bug. + * Don't use this with devices which don't have this bug. */ static int sbp2_default_workarounds; module_param_named(workarounds, sbp2_default_workarounds, int, 0644); @@ -158,6 +163,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS) ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36) ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8) + ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY) ", or a combination)"); /* legacy parameter */ @@ -291,6 +297,7 @@ static struct hpsb_protocol_driver sbp2_driver = { */ static const struct { u32 firmware_revision; + u32 model_id; unsigned workarounds; } sbp2_workarounds_table[] = { /* TSB42AA9 */ { @@ -305,6 +312,31 @@ static const struct { /* Symbios bridge */ { .firmware_revision = 0xa0b800, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + }, + /* + * Note about the following Apple iPod blacklist entries: + * + * There are iPods (2nd gen, 3rd gen) with model_id==0. Since our + * matching logic treats 0 as a wildcard, we cannot match this ID + * without rewriting the matching routine. Fortunately these iPods + * do not feature the read_capacity bug according to one report. + * Read_capacity behaviour as well as model_id could change due to + * Apple-supplied firmware updates though. + */ + /* iPod 4th generation */ { + .firmware_revision = 0x0a2700, + .model_id = 0x000021, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, + .model_id = 0x000023, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod Photo */ { + .firmware_revision = 0x0a2700, + .model_id = 0x00007e, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1556,18 +1588,25 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, } for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) { - if (sbp2_workarounds_table[i].firmware_revision != + if (sbp2_workarounds_table[i].firmware_revision && + sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; + if (sbp2_workarounds_table[i].model_id && + sbp2_workarounds_table[i].model_id != ud->model_id) + continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; } if (workarounds) - SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": " - "0x%x (firmware_revision 0x%x)", + SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x " + "(firmware_revision 0x%06x, vendor_id 0x%06x," + " model_id 0x%06x)", NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), - workarounds, firmware_revision); + workarounds, firmware_revision, + ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, + ud->model_id); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ @@ -2488,6 +2527,8 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev) if (sdev->type == TYPE_DISK && scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8) sdev->skip_ms_page_8 = 1; + if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY) + sdev->fix_capacity = 1; return 0; } diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index e40caf5d61ac..3af2710f1858 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -238,6 +238,7 @@ struct sbp2_status_block { #define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 #define SBP2_WORKAROUND_INQUIRY_36 0x2 #define SBP2_WORKAROUND_MODE_SENSE_8 0x4 +#define SBP2_WORKAROUND_FIX_CAPACITY 0x8 /* This is the two dma types we use for cmd_dma below */ enum cmd_dma_types { -- cgit v1.2.3 From 679c0cd2dd61c825ab910fdbf347a8b7d1dddec4 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 15 May 2006 22:08:09 +0200 Subject: [PATCH] sbp2: add ability to override hardwired blacklist In case the blacklist with workarounds for device bugs yields a false positive, the module load parameter can now also be used as an override instead of an addition to the blacklist. Signed-off-by: Stefan Richter Signed-off-by: Linus Torvalds --- drivers/ieee1394/sbp2.c | 29 ++++++++++++++++++----------- drivers/ieee1394/sbp2.h | 1 + 2 files changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 09e9291f1848..73555806c483 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -156,6 +156,11 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)" * Tell sd_mod to correct the last sector number reported by read_capacity. * Avoids access beyond actual disk limits on devices with an off-by-one bug. * Don't use this with devices which don't have this bug. + * + * - override internal blacklist + * Instead of adding to the built-in blacklist, use only the workarounds + * specified in the module load parameter. + * Useful if a blacklist entry interfered with a non-broken device. */ static int sbp2_default_workarounds; module_param_named(workarounds, sbp2_default_workarounds, int, 0644); @@ -164,6 +169,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36) ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8) ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY) + ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE) ", or a combination)"); /* legacy parameter */ @@ -1587,17 +1593,18 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, workarounds |= SBP2_WORKAROUND_INQUIRY_36; } - for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) { - if (sbp2_workarounds_table[i].firmware_revision && - sbp2_workarounds_table[i].firmware_revision != - (firmware_revision & 0xffff00)) - continue; - if (sbp2_workarounds_table[i].model_id && - sbp2_workarounds_table[i].model_id != ud->model_id) - continue; - workarounds |= sbp2_workarounds_table[i].workarounds; - break; - } + if (!(workarounds & SBP2_WORKAROUND_OVERRIDE)) + for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) { + if (sbp2_workarounds_table[i].firmware_revision && + sbp2_workarounds_table[i].firmware_revision != + (firmware_revision & 0xffff00)) + continue; + if (sbp2_workarounds_table[i].model_id && + sbp2_workarounds_table[i].model_id != ud->model_id) + continue; + workarounds |= sbp2_workarounds_table[i].workarounds; + break; + } if (workarounds) SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x " diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index 3af2710f1858..f4ccc9d0fba4 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -239,6 +239,7 @@ struct sbp2_status_block { #define SBP2_WORKAROUND_INQUIRY_36 0x2 #define SBP2_WORKAROUND_MODE_SENSE_8 0x4 #define SBP2_WORKAROUND_FIX_CAPACITY 0x8 +#define SBP2_WORKAROUND_OVERRIDE 0x100 /* This is the two dma types we use for cmd_dma below */ enum cmd_dma_types { -- cgit v1.2.3 From a54c9d30dbb06391ec4422aaf0e1dc2c8c53bd3e Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 15 May 2006 22:09:46 +0200 Subject: [PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices Re-enable posted writes for status FIFO. Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x and older, this also fixes an interoperability regression since 2.6.16: http://bugzilla.kernel.org/show_bug.cgi?id=6356 (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.) Signed-off-by: Stefan Richter Tested-by: Vanei Heidemann Tested-by: Martin Putzlocher (chip type unconfirmed) Signed-off-by: Linus Torvalds --- drivers/ieee1394/ohci1394.c | 2 +- drivers/ieee1394/sbp2.c | 9 +++++++-- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 19222878aae9..11f13778f139 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci) * register content. * To actually enable physical responses is the job of our interrupt * handler which programs the physical request filter. */ - reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000); + reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000); DBGMSG("physUpperBoundOffset=%08x", reg_read(ohci, OHCI1394_PhyUpperBound)); diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 73555806c483..8a23fb54c693 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -835,11 +835,16 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud /* Register the status FIFO address range. We could use the same FIFO * for targets at different nodes. However we need different FIFOs per - * target in order to support multi-unit devices. */ + * target in order to support multi-unit devices. + * The FIFO is located out of the local host controller's physical range + * but, if possible, within the posted write area. Status writes will + * then be performed as unified transactions. This slightly reduces + * bandwidth usage, and some Prolific based devices seem to require it. + */ scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace( &sbp2_highlevel, ud->ne->host, &sbp2_ops, sizeof(struct sbp2_status_block), sizeof(quadlet_t), - ~0ULL, ~0ULL); + 0x010000000000ULL, CSR1212_ALL_SPACE_END); if (!scsi_id->status_fifo_addr) { SBP2_ERR("failed to allocate status FIFO address range"); goto failed_alloc; -- cgit v1.2.3 From 0cb4fe8d2658dc0bd1accfbb74ee288a9d6788f4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 17 May 2006 22:20:50 -0700 Subject: IB/uverbs: Don't leak ref to mm on error path In ib_umem_release_on_close(), if the kmalloc() fails, then a reference to current->mm will be leaked. Fix this by adding a mmput() instead of just returning on kmalloc() failure. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_mem.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c index 36a32c315668..efe147dbeb42 100644 --- a/drivers/infiniband/core/uverbs_mem.c +++ b/drivers/infiniband/core/uverbs_mem.c @@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem) */ work = kmalloc(sizeof *work, GFP_KERNEL); - if (!work) + if (!work) { + mmput(mm); return; + } INIT_WORK(&work->work, ib_umem_account, work); work->mm = mm; -- cgit v1.2.3 From 23f3bc0f2c1e26215b671499c07047c325d54d9c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 18 May 2006 18:32:54 +0300 Subject: IB/mthca: Fix posting lists of 256 receive requests for Tavor If we post a list of length 256 exactly, nreq in doorbell gets set to 256 which is wrong: it should be encoded by 0. This is because we only zero it out on the next WR, which may not be there. The solution is to ring the doorbell after posting a WQE, not before posting the next one. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 35 +++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 19765f6f8d58..07c13be07a4a 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1727,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, ind = qp->rq.next_ind; - for (nreq = 0; wr; ++nreq, wr = wr->next) { - if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) { - nreq = 0; - - doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0); - doorbell[1] = cpu_to_be32(qp->qpn << 8); - - wmb(); - - mthca_write64(doorbell, - dev->kar + MTHCA_RECEIVE_DOORBELL, - MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock)); - - qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB; - size0 = 0; - } - + for (nreq = 0; wr; wr = wr->next) { if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) { mthca_err(dev, "RQ %06x full (%u head, %u tail," " %d max, %d nreq)\n", qp->qpn, @@ -1797,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, ++ind; if (unlikely(ind >= qp->rq.max)) ind -= qp->rq.max; + + ++nreq; + if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) { + nreq = 0; + + doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0); + doorbell[1] = cpu_to_be32(qp->qpn << 8); + + wmb(); + + mthca_write64(doorbell, + dev->kar + MTHCA_RECEIVE_DOORBELL, + MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock)); + + qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB; + size0 = 0; + } } out: -- cgit v1.2.3 From 2c171bf13423dc5293188cea7f6c2da1720926e2 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Fri, 19 May 2006 21:48:03 +0100 Subject: [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups Patch from Pavel Pisa There has been problems that for some paths that clock are not stopped during new command programming and initiation. Result is issuing of incorrect command to the card. Some other problems are cleaned too. Noisy report of known ERRATUM #4 has been suppressed. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- drivers/mmc/au1xmmc.c | 6 +++--- drivers/mmc/imxmmc.c | 24 ++++++++++++++---------- drivers/mmc/mmc.c | 1 + drivers/mmc/mmc_block.c | 1 + drivers/mmc/pxamci.c | 4 ++-- drivers/mmc/wbsd.c | 8 ++++---- include/linux/mmc/mmc.h | 1 + 7 files changed, 26 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 914d62b24064..5dc4bee7abeb 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) } else data->bytes_xfered = - (data->blocks * (1 << data->blksz_bits)) - + (data->blocks * data->blksz) - host->pio.len; } @@ -575,7 +575,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) { - int datalen = data->blocks * (1 << data->blksz_bits); + int datalen = data->blocks * data->blksz; if (dma != 0) host->flags |= HOST_F_DMA; @@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) if (host->dma.len == 0) return MMC_ERR_TIMEOUT; - au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host)); + au_writel(data->blksz - 1, HOST_BLKSIZE(host)); if (host->flags & HOST_F_DMA) { int i; diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 79358e223f57..a4eb1d0e7a71 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host, if(!loops) return 0; - dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", - loops, where, *pstat, stat_mask); + /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ + if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000)) + dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", + loops, where, *pstat, stat_mask); return loops; } @@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, WARN_ON(host->cmd != NULL); host->cmd = cmd; + /* Ensure, that clock are stopped else command programming and start fails */ + imxmci_stop_clock(host); + if (cmd->flags & MMC_RSP_BUSY) cmdat |= CMD_DAT_CONT_BUSY; @@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) int trans_done = 0; unsigned int stat = *pstat; - if(host->actual_bus_width == MMC_BUS_WIDTH_4) + if(host->actual_bus_width != MMC_BUS_WIDTH_4) burst_len = 16; else burst_len = 64; @@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) stat = MMC_STATUS; /* Flush extra bytes from FIFO */ - while(flush_len >= 2){ - flush_len -= 2; + while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){ i = MMC_BUFFER_ACCESS; stat = MMC_STATUS; stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */ @@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data) data_dir_mask = STATUS_DATA_TRANS_DONE; } - imxmci_busy_wait_for_status(host, &stat, - data_dir_mask, - 50, "imxmci_tasklet_fnc data"); - if(stat & data_dir_mask) { clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); imxmci_data_done(host, stat); @@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) imxmci_stop_clock(host); MMC_CLK_RATE = (prescaler<<3) | clk; - imxmci_start_clock(host); + /* + * Under my understanding, clock should not be started there, because it would + * initiate SDHC sequencer and send last or random command into card + */ + /*imxmci_start_clock(host);*/ dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE); } else { diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 1ca2c8b9c9b5..6201f3086a02 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host) data.timeout_ns = card->csd.tacc_ns * 10; data.timeout_clks = card->csd.tacc_clks * 10; data.blksz_bits = 3; + data.blksz = 1 << 3; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 06bd1f4cb9b1..e39cc05c64c2 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.timeout_ns = card->csd.tacc_ns * 10; brq.data.timeout_clks = card->csd.tacc_clks * 10; brq.data.blksz_bits = md->block_bits; + brq.data.blksz = 1 << md->block_bits; brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); brq.stop.opcode = MMC_STOP_TRANSMISSION; brq.stop.arg = 0; diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index f97b472085cb..b49368fd96b8 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) nob = 0xffff; writel(nob, host->base + MMC_NOB); - writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); + writel(data->blksz, host->base + MMC_BLKLEN); clks = (unsigned long long)data->timeout_ns * CLOCKRATE; do_div(clks, 1000000000UL); @@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) * data blocks as being in error. */ if (data->error == MMC_ERR_NONE) - data->bytes_xfered = data->blocks << data->blksz_bits; + data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 39b3d97f891e..8167332d4013 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) unsigned long dmaflags; DBGF("blksz %04x blks %04x flags %08x\n", - 1 << data->blksz_bits, data->blocks, data->flags); + data->blksz, data->blocks, data->flags); DBGF("tsac %d ms nsac %d clk\n", data->timeout_ns / 1000000, data->timeout_clks); /* * Calculate size. */ - host->size = data->blocks << data->blksz_bits; + host->size = data->blocks * data->blksz; /* * Check timeout values for overflow. @@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) * Two bytes are needed for each data line. */ if (host->bus_width == MMC_BUS_WIDTH_1) { - blksize = (1 << data->blksz_bits) + 2; + blksize = data->blksz + 2; wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0); wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF); } else if (host->bus_width == MMC_BUS_WIDTH_4) { - blksize = (1 << data->blksz_bits) + 2 * 4; + blksize = data->blksz + 2 * 4; wbsd_write_index(host, WBSD_IDX_PBSMSB, ((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH); diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index bdc556d88498..03a14a30c46a 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -69,6 +69,7 @@ struct mmc_data { unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */ unsigned int timeout_clks; /* data timeout (in clocks) */ unsigned int blksz_bits; /* data block size */ + unsigned int blksz; /* data block size */ unsigned int blocks; /* number of blocks */ unsigned int error; /* data error */ unsigned int flags; -- cgit v1.2.3 From 9b358e305c1d783c8a4ebf00344e95deb9e38f3d Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:21:03 -0400 Subject: [PATCH] sata_mv: prevent unnecessary double-resets The mv_err_intr() function is invoked from the driver's interrupt handler, as well as from the timeout function. This patch prevents it from triggering a one-after-the-other double reset of the controller when invoked from the timeout function. This also adds a check for a timeout race condition that has been observed to occur with this driver in earlier kernels. This should not be needed, in theory, but in practice it has caught bugs. Maybe nuke it at a later date. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index d5fdcb9a8842..87f26cd60fae 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1291,6 +1291,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap) /** * mv_err_intr - Handle error interrupts on the port * @ap: ATA channel to manipulate + * @reset_allowed: bool: 0 == don't trigger from reset here * * In most cases, just clear the interrupt and move on. However, * some cases require an eDMA reset, which is done right before @@ -1301,7 +1302,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -static void mv_err_intr(struct ata_port *ap) +static void mv_err_intr(struct ata_port *ap, int reset_allowed) { void __iomem *port_mmio = mv_ap_base(ap); u32 edma_err_cause, serr = 0; @@ -1323,9 +1324,8 @@ static void mv_err_intr(struct ata_port *ap) writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); /* check for fatal here and recover if needed */ - if (EDMA_ERR_FATAL & edma_err_cause) { + if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause)) mv_stop_and_reset(ap); - } } /** @@ -1406,7 +1406,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, shift++; /* skip bit 8 in the HC Main IRQ reg */ } if ((PORT0_ERR << shift) & relevant) { - mv_err_intr(ap); + mv_err_intr(ap, 1); err_mask |= AC_ERR_OTHER; handled = 1; } @@ -2031,11 +2031,14 @@ static void mv_eng_timeout(struct ata_port *ap) ap->host_set->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); - mv_err_intr(ap); + mv_err_intr(ap, 0); mv_stop_and_reset(ap); - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask |= AC_ERR_TIMEOUT; + ata_eh_qc_complete(qc); + } } /** -- cgit v1.2.3 From 615ab95342f6245026d8974b9724f7ea57d9a184 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:24:56 -0400 Subject: [PATCH] sata_mv: deal with interrupt coalescing interrupts In some systems, it is possible that the BIOS may have enabled interrupt coalescing for the Marvell controllers which support it. This patch adds code to detect/ack interrupts from the chip's coalescing (combing) logic. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 87f26cd60fae..3ed2f333d5a9 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -50,6 +50,12 @@ enum { MV_PCI_REG_BASE = 0, MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ + MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), + MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), + MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), + MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), + MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), + MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL = 0x1046c, MV_GPIO_PORT_CTL = 0x104f0, @@ -1448,6 +1454,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct ata_host_set *host_set = dev_instance; unsigned int hc, handled = 0, n_hcs; void __iomem *mmio = host_set->mmio_base; + struct mv_host_priv *hpriv; u32 irq_stat; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); @@ -1469,6 +1476,17 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, handled++; } } + + hpriv = host_set->private_data; + if (IS_60XX(hpriv)) { + /* deal with the interrupt coalescing bits */ + if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { + writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO); + writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI); + writelfl(0, mmio + MV_IRQ_COAL_CAUSE); + } + } + if (PCI_ERR & irq_stat) { printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", readl(mmio + PCI_IRQ_CAUSE_OFS)); -- cgit v1.2.3 From eb46d684600ac145501805a294c94675e82eab2e Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:29:21 -0400 Subject: [PATCH] sata_mv: chip initialization fixes The interface control register of the 60xx (and later) Marvell chip requires certain bits to always be set when writing to it. These bits incorrectly read-back as zeros, so the pattern must be ORed in with each write of the register. Also, bit 12 should NOT be set (note that Marvell's own driver also had bit-12 wrong here). While we're at it, we also now do pci_set_master() in the init code. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 3ed2f333d5a9..bb2409e761d0 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1885,7 +1885,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, if (IS_60XX(hpriv)) { u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 12) | (1 << 7); + ifctl |= (1 << 7); /* enable gen2i speed */ + ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); } @@ -2250,7 +2251,8 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, void __iomem *port_mmio = mv_port_base(mmio, port); u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 12); + ifctl |= (1 << 7); /* enable gen2i speed */ + ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); } @@ -2351,6 +2353,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { return rc; } + pci_set_master(pdev); rc = pci_request_regions(pdev, DRV_NAME); if (rc) { -- cgit v1.2.3 From e857f141945f29c16f72ffcfdbce097f8be6c4e9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:33:03 -0400 Subject: [PATCH] sata_mv: spurious interrupt workaround The 60xx chips, and possibly others, incorrectly assert DEV_IRQ interrupts on a regular basis. The cause of this is under investigation (by me and in theory by Marvell also), but regardless we do need to deal with these events. This patch tidies up some interrupt handler code, and ensures that we ignore DEV_IRQ interrupts when the drive still has ATA_BUSY asserted. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index bb2409e761d0..65dc65304f51 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1380,12 +1380,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap = host_set->ports[port]; struct mv_port_priv *pp = ap->private_data; - hard_port = port & MV_PORT_MASK; /* range 0-3 */ + hard_port = mv_hardport_from_port(port); /* range 0..3 */ handled = 0; /* ensure ata_status is set if handled++ */ /* Note that DEV_IRQ might happen spuriously during EDMA, - * and should be ignored in such cases. We could mask it, - * but it's pretty rare and may not be worth the overhead. + * and should be ignored in such cases. + * The cause of this is still under investigation. */ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { /* EDMA: check for response queue interrupt */ @@ -1399,6 +1399,11 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, ata_status = readb((void __iomem *) ap->ioaddr.status_addr); handled = 1; + /* ignore spurious intr if drive still BUSY */ + if (ata_status & ATA_BUSY) { + ata_status = 0; + handled = 0; + } } } -- cgit v1.2.3 From a6432436c5e14b416f27c8f87c5bf0bc36771f49 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:36:36 -0400 Subject: [PATCH] sata_mv: remove local copy of queue indexes The driver currently keeps local copies of the hardware request/response queue indexes. But it expends significant effort ensuring consistency between the two views, and still gets it wrong after an error or reset occurs. This patch removes the local copies, in favour of just accessing the hardware whenever we need them. Eventually this may need to be tweaked again for NCQ, but for now this works and solves problems some users were seeing. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 76 ++++++++++++++++++++++---------------------------- 1 file changed, 33 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 65dc65304f51..dea9d4e42586 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -308,9 +308,6 @@ struct mv_port_priv { dma_addr_t crpb_dma; struct mv_sg *sg_tbl; dma_addr_t sg_tbl_dma; - - unsigned req_producer; /* cp of req_in_ptr */ - unsigned rsp_consumer; /* cp of rsp_out_ptr */ u32 pp_flags; }; @@ -943,8 +940,6 @@ static int mv_port_start(struct ata_port *ap) writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - pp->req_producer = pp->rsp_consumer = 0; - /* Don't turn on EDMA here...do it before DMA commands only. Else * we'll be unable to send non-data, PIO, etc due to restricted access * to shadow regs. @@ -1028,10 +1023,9 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) } } -static inline unsigned mv_inc_q_index(unsigned *index) +static inline unsigned mv_inc_q_index(unsigned index) { - *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK; - return *index; + return (index + 1) & MV_MAX_Q_DEPTH_MASK; } static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) @@ -1059,15 +1053,11 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) u16 *cw; struct ata_taskfile *tf; u16 flags = 0; + unsigned in_index; if (ATA_PROT_DMA != qc->tf.protocol) return; - /* the req producer index should be the same as we remember it */ - WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != - pp->req_producer); - /* Fill in command request block */ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) @@ -1075,13 +1065,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; - pp->crqb[pp->req_producer].sg_addr = + /* get current queue index from hardware */ + in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + pp->crqb[in_index].sg_addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - pp->crqb[pp->req_producer].sg_addr_hi = + pp->crqb[in_index].sg_addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); - pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); + pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); - cw = &pp->crqb[pp->req_producer].ata_cmd[0]; + cw = &pp->crqb[in_index].ata_cmd[0]; tf = &qc->tf; /* Sadly, the CRQB cannot accomodate all registers--there are @@ -1150,16 +1144,12 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) struct mv_port_priv *pp = ap->private_data; struct mv_crqb_iie *crqb; struct ata_taskfile *tf; + unsigned in_index; u32 flags = 0; if (ATA_PROT_DMA != qc->tf.protocol) return; - /* the req producer index should be the same as we remember it */ - WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != - pp->req_producer); - /* Fill in Gen IIE command request block */ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) @@ -1168,7 +1158,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; - crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer]; + /* get current queue index from hardware */ + in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); crqb->flags = cpu_to_le32(flags); @@ -1216,6 +1210,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(qc->ap); struct mv_port_priv *pp = qc->ap->private_data; + unsigned in_index; u32 in_ptr; if (ATA_PROT_DMA != qc->tf.protocol) { @@ -1227,23 +1222,20 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } - in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - /* the req producer index should be the same as we remember it */ - WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != - pp->req_producer); /* until we do queuing, the queue should be empty at this point */ - WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != - ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) + >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - mv_inc_q_index(&pp->req_producer); /* now incr producer index */ + in_index = mv_inc_q_index(in_index); /* now incr producer index */ mv_start_dma(port_mmio, pp); /* and write the request in pointer to kick the EDMA to life */ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; - in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT; + in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT; writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); return 0; @@ -1266,28 +1258,26 @@ static u8 mv_get_crpb_status(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; + unsigned out_index; u32 out_ptr; u8 ata_status; - out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - - /* the response consumer index should be the same as we remember it */ - WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != - pp->rsp_consumer); + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT; + ata_status = le16_to_cpu(pp->crpb[out_index].flags) + >> CRPB_FLAG_STATUS_SHIFT; /* increment our consumer index... */ - pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); + out_index = mv_inc_q_index(out_index); /* and, until we do NCQ, there should only be 1 CRPB waiting */ - WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> - EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != - pp->rsp_consumer); + WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) + >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); /* write out our inc'd consumer index so EDMA knows we're caught up */ out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; - out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT; + out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT; writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); /* Return ATA status register for completed CRPB */ -- cgit v1.2.3 From 559eedad7f7764dacca33980127b4615011230e4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:40:15 -0400 Subject: [PATCH] sata_mv: endian fix This fixes a byte-swap issue on PPC, found by Zang Roy-r61911 on the powerpc platform. His original patch also had some other platform-specific changes in #ifdef's, but I'm not sure yet how to incorporate them. Look for another patch for those (soon). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index dea9d4e42586..dcda579ee93a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1030,8 +1030,9 @@ static inline unsigned mv_inc_q_index(unsigned index) static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) { - *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | (last ? CRQB_CMD_LAST : 0); + *cmdw = cpu_to_le16(tmp); } /** -- cgit v1.2.3 From 63a25355cd5cd9a2d19a7c50eed4f0a8aa622f72 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 19 May 2006 16:41:27 -0400 Subject: [PATCH] sata_mv: version bump Increment the version number inside sata_mv.c. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index dcda579ee93a..9b8bca1ac1f0 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -37,7 +37,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.6" +#define DRV_VERSION "0.7" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ -- cgit v1.2.3 From e2a7f77a7b4ab298a38c8d1f624628456069bdb0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 May 2006 10:50:18 -0700 Subject: [PATCH] libata-core: fix current kernel-doc warnings Fix all current kernel-doc warnings. Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index bd147207f25d..823dfa78c0ba 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -864,6 +864,9 @@ static unsigned int ata_id_xfermask(const u16 *id) /** * ata_port_queue_task - Queue port_task * @ap: The ata_port to queue port_task for + * @fn: workqueue function to be scheduled + * @data: data value to pass to workqueue function + * @delay: delay time for workqueue function * * Schedule @fn(@data) for execution after @delay jiffies using * port_task. There is one port_task per port and it's the @@ -2739,6 +2742,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap, * ata_dev_init_params - Issue INIT DEV PARAMS command * @ap: Port associated with device @dev * @dev: Device to which command will be sent + * @heads: Number of heads (taskfile parameter) + * @sectors: Number of sectors (taskfile parameter) * * LOCKING: * Kernel thread context (may sleep) @@ -4302,6 +4307,7 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev) * ata_device_suspend - prepare a device for suspend * @ap: port the device is connected to * @dev: the device to suspend + * @state: target power management state * * Flush the cache on the drive, if appropriate, then issue a * standbynow command. -- cgit v1.2.3