From 481c7f868c6d855f31a29c69b445ac4aee9625a6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sun, 2 Nov 2014 10:07:56 -0800 Subject: mfd: twl4030-power: Fix poweroff with PM configuration enabled Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") enabled configuring the PM features for twl4030. This caused poweroff command to fail on devices that have the BCI charger on twl4030 wired, or have power wired for VBUS. Instead of powering off, the device reboots. This is because voltage is detected on charger or VBUS with the default bits enabled for the power transition registers. To fix the issue, let's just clear VBUS and CHG bits as we want poweroff command to keep the system powered off. Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") Cc: stable@vger.kernel.org # v3.16+ Reported-by: Russell King Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- drivers/mfd/twl4030-power.c | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index cf92a6d1c532..50f9091bcd38 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -44,6 +44,15 @@ static u8 twl4030_start_script_address = 0x2b; #define PWR_DEVSLP BIT(1) #define PWR_DEVOFF BIT(0) +/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */ +#define STARTON_SWBUG BIT(7) /* Start on watchdog */ +#define STARTON_VBUS BIT(5) /* Start on VBUS */ +#define STARTON_VBAT BIT(4) /* Start on battery insert */ +#define STARTON_RTC BIT(3) /* Start on RTC */ +#define STARTON_USB BIT(2) /* Start on USB host */ +#define STARTON_CHG BIT(1) /* Start on charger */ +#define STARTON_PWON BIT(0) /* Start on PWRON button */ + #define SEQ_OFFSYNC (1 << 0) #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) @@ -606,6 +615,44 @@ twl4030_power_configure_resources(const struct twl4030_power_data *pdata) return 0; } +static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues) +{ + u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION, + TWL4030_PM_MASTER_CFG_P2_TRANSITION, + TWL4030_PM_MASTER_CFG_P3_TRANSITION, }; + u8 val; + int i, err; + + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); + if (err) + goto relock; + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, + TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); + if (err) + goto relock; + + for (i = 0; i < sizeof(regs); i++) { + err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, + &val, regs[i]); + if (err) + break; + val = (~bitmask & val) | (bitmask & bitvalues); + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, + val, regs[i]); + if (err) + break; + } + + if (err) + pr_err("TWL4030 Register access failed: %i\n", err); + +relock: + return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); +} + /* * In master mode, start the power off sequence. * After a successful execution, TWL shuts down the power to the SoC @@ -615,6 +662,11 @@ void twl4030_power_off(void) { int err; + /* Disable start on charger or VBUS as it can break poweroff */ + err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0); + if (err) + pr_err("TWL4030 Unable to configure start-up\n"); + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF, TWL4030_PM_MASTER_P1_SW_EVENTS); if (err) -- cgit v1.2.3