From cec935ce69fc386f13959578deb40963ebbb85c3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 4 Dec 2019 08:52:08 +0100 Subject: media: cec: CEC 2.0-only bcast messages were ignored Some messages are allowed to be a broadcast message in CEC 2.0 only, and should be ignored by CEC 1.4 devices. Unfortunately, the check was wrong, causing such messages to be marked as invalid under CEC 2.0. Signed-off-by: Hans Verkuil Cc: # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index 9340435a94a0..e90c30dac68b 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -1085,11 +1085,11 @@ void cec_received_msg_ts(struct cec_adapter *adap, valid_la = false; else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED)) valid_la = false; - else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST1_4)) + else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST)) valid_la = false; else if (cec_msg_is_broadcast(msg) && - adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0 && - !(dir_fl & BCAST2_0)) + adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0 && + !(dir_fl & BCAST1_4)) valid_la = false; } if (valid_la && min_len) { -- cgit v1.2.3 From 95c29d46ab2a517e4c26d0a07300edca6768db17 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 7 Dec 2019 23:48:09 +0100 Subject: media: cec: avoid decrementing transmit_queue_sz if it is 0 WARN if transmit_queue_sz is 0 but do not decrement it. The CEC adapter will become unresponsive if it goes below 0 since then it thinks there are 4 billion messages in the queue. Obviously this should not happen, but a driver bug could cause this. Signed-off-by: Hans Verkuil Cc: # for v4.12 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index e90c30dac68b..1060e633b623 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -380,7 +380,8 @@ static void cec_data_cancel(struct cec_data *data, u8 tx_status) } else { list_del_init(&data->list); if (!(data->msg.tx_status & CEC_TX_STATUS_OK)) - data->adap->transmit_queue_sz--; + if (!WARN_ON(!data->adap->transmit_queue_sz)) + data->adap->transmit_queue_sz--; } if (data->msg.tx_status & CEC_TX_STATUS_OK) { @@ -432,6 +433,14 @@ static void cec_flush(struct cec_adapter *adap) * need to do anything special in that case. */ } + /* + * If something went wrong and this counter isn't what it should + * be, then this will reset it back to 0. Warn if it is not 0, + * since it indicates a bug, either in this framework or in a + * CEC driver. + */ + if (WARN_ON(adap->transmit_queue_sz)) + adap->transmit_queue_sz = 0; } /* @@ -522,7 +531,8 @@ int cec_thread_func(void *_adap) data = list_first_entry(&adap->transmit_queue, struct cec_data, list); list_del_init(&data->list); - adap->transmit_queue_sz--; + if (!WARN_ON(!data->adap->transmit_queue_sz)) + adap->transmit_queue_sz--; /* Make this the current transmitting message */ adap->transmitting = data; -- cgit v1.2.3 From ac479b51f3f4aaa852b5d3f00ecfb9290230cf64 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 11 Dec 2019 12:47:57 +0100 Subject: media: cec: check 'transmit_in_progress', not 'transmitting' Currently wait_event_interruptible_timeout is called in cec_thread_func() when adap->transmitting is set. But if the adapter is unconfigured while transmitting, then adap->transmitting is set to NULL. But the hardware is still actually transmitting the message, and that's indicated by adap->transmit_in_progress and we should wait until that is finished or times out before transmitting new messages. As the original commit says: adap->transmitting is the userspace view, adap->transmit_in_progress reflects the hardware state. However, if adap->transmitting is NULL and adap->transmit_in_progress is true, then wait_event_interruptible is called (no timeout), which can get stuck indefinitely if the CEC driver is flaky and never marks the transmit-in-progress as 'done'. So test against transmit_in_progress when deciding whether to use the timeout variant or not, instead of testing against adap->transmitting. Signed-off-by: Hans Verkuil Fixes: 32804fcb612b ("media: cec: keep track of outstanding transmits") Cc: # for v4.19 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index 1060e633b623..6c95dc471d4c 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -465,7 +465,7 @@ int cec_thread_func(void *_adap) bool timeout = false; u8 attempts; - if (adap->transmitting) { + if (adap->transmit_in_progress) { int err; /* @@ -500,7 +500,7 @@ int cec_thread_func(void *_adap) goto unlock; } - if (adap->transmitting && timeout) { + if (adap->transmit_in_progress && timeout) { /* * If we timeout, then log that. Normally this does * not happen and it is an indication of a faulty CEC @@ -509,14 +509,18 @@ int cec_thread_func(void *_adap) * so much traffic on the bus that the adapter was * unable to transmit for CEC_XFER_TIMEOUT_MS (2.1s). */ - pr_warn("cec-%s: message %*ph timed out\n", adap->name, - adap->transmitting->msg.len, - adap->transmitting->msg.msg); + if (adap->transmitting) { + pr_warn("cec-%s: message %*ph timed out\n", adap->name, + adap->transmitting->msg.len, + adap->transmitting->msg.msg); + /* Just give up on this. */ + cec_data_cancel(adap->transmitting, + CEC_TX_STATUS_TIMEOUT); + } else { + pr_warn("cec-%s: transmit timed out\n", adap->name); + } adap->transmit_in_progress = false; adap->tx_timeouts++; - /* Just give up on this. */ - cec_data_cancel(adap->transmitting, - CEC_TX_STATUS_TIMEOUT); goto unlock; } -- cgit v1.2.3 From e5a52a1d15c79bb48a430fb263852263ec1d3f11 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 7 Dec 2019 23:43:23 +0100 Subject: media: pulse8-cec: fix lost cec_transmit_attempt_done() call The periodic PING command could interfere with the result of a CEC transmit, causing a lost cec_transmit_attempt_done() call. Signed-off-by: Hans Verkuil Cc: # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/pulse8-cec/pulse8-cec.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/pulse8-cec/pulse8-cec.c b/drivers/media/usb/pulse8-cec/pulse8-cec.c index ac88ade94cda..59609556d969 100644 --- a/drivers/media/usb/pulse8-cec/pulse8-cec.c +++ b/drivers/media/usb/pulse8-cec/pulse8-cec.c @@ -116,6 +116,7 @@ struct pulse8 { unsigned int vers; struct completion cmd_done; struct work_struct work; + u8 work_result; struct delayed_work ping_eeprom_work; struct cec_msg rx_msg; u8 data[DATA_SIZE]; @@ -137,8 +138,10 @@ static void pulse8_irq_work_handler(struct work_struct *work) { struct pulse8 *pulse8 = container_of(work, struct pulse8, work); + u8 result = pulse8->work_result; - switch (pulse8->data[0] & 0x3f) { + pulse8->work_result = 0; + switch (result & 0x3f) { case MSGCODE_FRAME_DATA: cec_received_msg(pulse8->adap, &pulse8->rx_msg); break; @@ -172,12 +175,12 @@ static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data, pulse8->escape = false; } else if (data == MSGEND) { struct cec_msg *msg = &pulse8->rx_msg; + u8 msgcode = pulse8->buf[0]; if (debug) dev_info(pulse8->dev, "received: %*ph\n", pulse8->idx, pulse8->buf); - pulse8->data[0] = pulse8->buf[0]; - switch (pulse8->buf[0] & 0x3f) { + switch (msgcode & 0x3f) { case MSGCODE_FRAME_START: msg->len = 1; msg->msg[0] = pulse8->buf[1]; @@ -186,14 +189,20 @@ static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data, if (msg->len == CEC_MAX_MSG_SIZE) break; msg->msg[msg->len++] = pulse8->buf[1]; - if (pulse8->buf[0] & MSGCODE_FRAME_EOM) + if (msgcode & MSGCODE_FRAME_EOM) { + WARN_ON(pulse8->work_result); + pulse8->work_result = msgcode; schedule_work(&pulse8->work); + break; + } break; case MSGCODE_TRANSMIT_SUCCEEDED: case MSGCODE_TRANSMIT_FAILED_LINE: case MSGCODE_TRANSMIT_FAILED_ACK: case MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA: case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE: + WARN_ON(pulse8->work_result); + pulse8->work_result = msgcode; schedule_work(&pulse8->work); break; case MSGCODE_HIGH_ERROR: -- cgit v1.2.3 From ce644cf3fa06504c2c71ab1b794160d54aaccbc0 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 6 Nov 2019 12:57:07 +0100 Subject: media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes A struct that needs to be aligned to 32 bytes has a size of 28. Increase the size to 32. This makes elements of arrays of this struct aligned to 32 as well, and other structs where members are aligned to 32 mixing ipu3_uapi_awb_fr_config_s as well as other types. Fixes: commit dca5ef2aa1e6 ("media: staging/intel-ipu3: remove the unnecessary compiler flags") Signed-off-by: Sakari Ailus Tested-by: Bingbu Cao Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/ipu3/include/intel-ipu3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/media/ipu3/include/intel-ipu3.h b/drivers/staging/media/ipu3/include/intel-ipu3.h index 08eaa0bad0de..1c9c3ba4d518 100644 --- a/drivers/staging/media/ipu3/include/intel-ipu3.h +++ b/drivers/staging/media/ipu3/include/intel-ipu3.h @@ -449,7 +449,7 @@ struct ipu3_uapi_awb_fr_config_s { __u16 reserved1; __u32 bayer_sign; __u8 bayer_nf; - __u8 reserved2[3]; + __u8 reserved2[7]; } __attribute__((aligned(32))) __packed; /** -- cgit v1.2.3