From 51fd554b6547b74c7e6d1f52885ba8532b531023 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:29 +0100 Subject: i2c: Delete the broken i2c-ite bus driver The rest of the ITE8172 support was already removed from MIPS tree. Signed-off-by: Jean Delvare Signed-off-by: Yoichi Yuasa Acked-by: Ralf Baechle --- drivers/i2c/algos/Kconfig | 11 - drivers/i2c/algos/Makefile | 1 - drivers/i2c/algos/i2c-algo-ite.c | 806 --------------------------------------- drivers/i2c/algos/i2c-algo-ite.h | 117 ------ drivers/i2c/busses/Kconfig | 12 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-ite.c | 278 -------------- 7 files changed, 1226 deletions(-) delete mode 100644 drivers/i2c/algos/i2c-algo-ite.c delete mode 100644 drivers/i2c/algos/i2c-algo-ite.h delete mode 100644 drivers/i2c/busses/i2c-ite.c (limited to 'drivers') diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index c034820615bb..af0203409dd1 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -38,17 +38,6 @@ config I2C_ALGOPCA This support is also available as a module. If so, the module will be called i2c-algo-pca. -config I2C_ALGOITE - tristate "ITE I2C Algorithm" - depends on MIPS_ITE8172 && I2C - help - This supports the use of the ITE8172 I2C interface found on some MIPS - systems. Say Y if you have one of these. You should also say Y for - the ITE I2C peripheral driver support below. - - This support is also available as a module. If so, the module - will be called i2c-algo-ite. - config I2C_ALGO8XX tristate "MPC8xx CPM I2C interface" depends on 8xx && I2C diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile index 208be04a3dbd..cac1051bd4f1 100644 --- a/drivers/i2c/algos/Makefile +++ b/drivers/i2c/algos/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o -obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o ifeq ($(CONFIG_I2C_DEBUG_ALGO),y) diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c deleted file mode 100644 index 70d8eefb5efc..000000000000 --- a/drivers/i2c/algos/i2c-algo-ite.c +++ /dev/null @@ -1,806 +0,0 @@ -/* - ------------------------------------------------------------------------- - i2c-algo-ite.c i2c driver algorithms for ITE adapters - - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2000 MontaVista Software Inc. - - --------------------------------------------------------------------------- - This file was highly leveraged from i2c-algo-pcf.c, which was created - by Simon G. Vogl and Hans Berglund: - - - Copyright (C) 1995-1997 Simon G. Vogl - 1998-2000 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki and - Frodo Looijaard ,and also from Martin Bailey - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include "i2c-algo-ite.h" - -#define PM_DSR IT8172_PCI_IO_BASE + IT_PM_DSR -#define PM_IBSR IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04 -#define GPIO_CCR IT8172_PCI_IO_BASE + IT_GPCCR - -#define DEB2(x) if (i2c_debug>=2) x -#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/ -#define DEF_TIMEOUT 16 - - -/* module parameters: - */ -static int i2c_debug; -static int iic_test; /* see if the line-setting functions work */ - -/* --- setting states on the bus with the right timing: --------------- */ - -#define get_clock(adap) adap->getclock(adap->data) -#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val) -#define iic_inw(adap, reg) adap->getiic(adap->data, reg) - - -/* --- other auxiliary functions -------------------------------------- */ - -static void iic_start(struct i2c_algo_iic_data *adap) -{ - iic_outw(adap,ITE_I2CHCR,ITE_CMD); -} - -static void iic_stop(struct i2c_algo_iic_data *adap) -{ - iic_outw(adap,ITE_I2CHCR,0); - iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI); -} - -static void iic_reset(struct i2c_algo_iic_data *adap) -{ - iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80); -} - - -static int wait_for_bb(struct i2c_algo_iic_data *adap) -{ - int timeout = DEF_TIMEOUT; - short status; - - status = iic_inw(adap, ITE_I2CHSR); -#ifndef STUB_I2C - while (timeout-- && (status & ITE_I2CHSR_HB)) { - udelay(1000); /* How much is this? */ - status = iic_inw(adap, ITE_I2CHSR); - } -#endif - if (timeout<=0) { - printk(KERN_ERR "Timeout, host is busy\n"); - iic_reset(adap); - } - return(timeout<=0); -} - -/* After we issue a transaction on the IIC bus, this function - * is called. It puts this process to sleep until we get an interrupt from - * from the controller telling us that the transaction we requested in complete. - */ -static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) { - - int timeout = DEF_TIMEOUT; - - timeout = wait_for_bb(adap); - if (timeout) { - DEB2(printk("Timeout waiting for host not busy\n");) - return -EIO; - } - timeout = DEF_TIMEOUT; - - *status = iic_inw(adap, ITE_I2CHSR); -#ifndef STUB_I2C - while (timeout-- && !(*status & ITE_I2CHSR_TDI)) { - adap->waitforpin(); - *status = iic_inw(adap, ITE_I2CHSR); - } -#endif - if (timeout <= 0) - return(-1); - else - return(0); -} - -static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status) -{ - int timeout = DEF_TIMEOUT; - - *status = iic_inw(adap, ITE_I2CFSR); -#ifndef STUB_I2C - while (timeout-- && (*status & ITE_I2CFSR_FE)) { - udelay(1000); - iic_inw(adap, ITE_I2CFSR); - } -#endif - if (timeout <= 0) - return(-1); - else - return(0); -} - -static int iic_init (struct i2c_algo_iic_data *adap) -{ - short i; - - /* Clear bit 7 to set I2C to normal operation mode */ - i=iic_inw(adap, PM_DSR)& 0xff7f; - iic_outw(adap, PM_DSR, i); - - /* set IT_GPCCR port C bit 2&3 as function 2 */ - i = iic_inw(adap, GPIO_CCR) & 0xfc0f; - iic_outw(adap,GPIO_CCR,i); - - /* Clear slave address/sub-address */ - iic_outw(adap,ITE_I2CSAR, 0); - iic_outw(adap,ITE_I2CSSAR, 0); - - /* Set clock counter register */ - iic_outw(adap,ITE_I2CCKCNT, get_clock(adap)); - - /* Set START/reSTART/STOP time registers */ - iic_outw(adap,ITE_I2CSHDR, 0x0a); - iic_outw(adap,ITE_I2CRSUR, 0x0a); - iic_outw(adap,ITE_I2CPSUR, 0x0a); - - /* Enable interrupts on completing the current transaction */ - iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE); - - /* Clear transfer count */ - iic_outw(adap,ITE_I2CFBCR, 0x0); - - DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n", - iic_inw(adap, ITE_I2CHSR))); - return 0; -} - - -/* - * Sanity check for the adapter hardware - check the reaction of - * the bus lines only if it seems to be idle. - */ -static int test_bus(struct i2c_algo_iic_data *adap, char *name) { -#if 0 - int scl,sda; - sda=getsda(adap); - if (adap->getscl==NULL) { - printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n"); - return 0; - } - scl=getscl(adap); - printk("test_bus: Adapter: %s scl: %d sda: %d -- testing...\n", - name,getscl(adap),getsda(adap)); - if (!scl || !sda ) { - printk("test_bus: %s seems to be busy.\n",adap->name); - goto bailout; - } - sdalo(adap); - printk("test_bus:1 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 != getsda(adap) ) { - printk("test_bus: %s SDA stuck high!\n",name); - sdahi(adap); - goto bailout; - } - if ( 0 == getscl(adap) ) { - printk("test_bus: %s SCL unexpected low while pulling SDA low!\n", - name); - goto bailout; - } - sdahi(adap); - printk("test_bus:2 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 == getsda(adap) ) { - printk("test_bus: %s SDA stuck low!\n",name); - sdahi(adap); - goto bailout; - } - if ( 0 == getscl(adap) ) { - printk("test_bus: %s SCL unexpected low while SDA high!\n", - adap->name); - goto bailout; - } - scllo(adap); - printk("test_bus:3 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 != getscl(adap) ) { - - sclhi(adap); - goto bailout; - } - if ( 0 == getsda(adap) ) { - printk("test_bus: %s SDA unexpected low while pulling SCL low!\n", - name); - goto bailout; - } - sclhi(adap); - printk("test_bus:4 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 == getscl(adap) ) { - printk("test_bus: %s SCL stuck low!\n",name); - sclhi(adap); - goto bailout; - } - if ( 0 == getsda(adap) ) { - printk("test_bus: %s SDA unexpected low while SCL high!\n", - name); - goto bailout; - } - printk("test_bus: %s passed test.\n",name); - return 0; -bailout: - sdahi(adap); - sclhi(adap); - return -ENODEV; -#endif - return (0); -} - -/* ----- Utility functions - */ - - -/* Verify the device we want to talk to on the IIC bus really exists. */ -static inline int try_address(struct i2c_algo_iic_data *adap, - unsigned int addr, int retries) -{ - int i, ret = -1; - short status; - - for (i=0;iudelay); - } - DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i, - addr)); - return ret; -} - - -static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf, - int count) -{ - struct i2c_algo_iic_data *adap = i2c_adap->algo_data; - int wrcount=0, timeout; - short status; - int loops, remainder, i, j; - union { - char byte[2]; - unsigned short word; - } tmp; - - iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]); - count--; - if (count == 0) - return -EIO; - - loops = count / 32; /* 32-byte FIFO */ - remainder = count % 32; - - if(loops) { - for(i=0; iname); - return -EREMOTEIO; /* got a better one ?? */ - } - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name); - return -EREMOTEIO; /* got a better one ?? */ - } - } - } - if(remainder) { - iic_outw(adap, ITE_I2CFBCR, remainder); - for(i=0; iname); - return -EREMOTEIO; /* got a better one ?? */ - } -#ifndef STUB_I2C - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name); - return -EREMOTEIO; /* got a better one ?? */ - } -#endif - } - iic_stop(adap); - return wrcount; -} - - -static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count, - int sread) -{ - int rdcount=0, i, timeout; - short status; - struct i2c_algo_iic_data *adap = i2c_adap->algo_data; - int loops, remainder, j; - union { - char byte[2]; - unsigned short word; - } tmp; - - loops = count / 32; /* 32-byte FIFO */ - remainder = count % 32; - - if(loops) { - for(i=0; iname); - return (-1); - } -#ifndef STUB_I2C - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name); - return (-1); - } -#endif - - timeout = wait_for_fe(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name); - return (-1); - } - - for(j=0; j<32/2; j++) { - tmp.word = iic_inw(adap, ITE_I2CFDR); - buf[rdcount++] = tmp.byte[1]; - buf[rdcount++] = tmp.byte[0]; - } - - /* status FIFO underrun */ - iic_inw(adap, ITE_I2CFSR); - - } - } - - - if(remainder) { - remainder=(remainder+1)/2 * 2; - iic_outw(adap, ITE_I2CFBCR, remainder); - if (sread) - iic_outw(adap, ITE_I2CHCR, ITE_SREAD); - else - iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */ - - timeout = wait_for_pin(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s read timeout.\n", i2c_adap->name); - return (-1); - } -#ifndef STUB_I2C - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name); - return (-1); - } -#endif - timeout = wait_for_fe(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name); - return (-1); - } - - for(i=0; i<(remainder+1)/2; i++) { - tmp.word = iic_inw(adap, ITE_I2CFDR); - buf[rdcount++] = tmp.byte[1]; - buf[rdcount++] = tmp.byte[0]; - } - - /* status FIFO underrun */ - iic_inw(adap, ITE_I2CFSR); - - } - - iic_stop(adap); - return rdcount; -} - - -/* This function implements combined transactions. Combined - * transactions consist of combinations of reading and writing blocks of data. - * Each transfer (i.e. a read or a write) is separated by a repeated start - * condition. - */ -#if 0 -static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) -{ - int i; - struct i2c_msg *pmsg; - int ret; - - DEB2(printk("Beginning combined transaction\n")); - - for(i=0; i<(num-1); i++) { - pmsg = &msgs[i]; - if(pmsg->flags & I2C_M_RD) { - DEB2(printk(" This one is a read\n")); - ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER); - } - else if(!(pmsg->flags & I2C_M_RD)) { - DEB2(printk("This one is a write\n")); - ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER); - } - } - /* Last read or write segment needs to be terminated with a stop */ - pmsg = &msgs[i]; - - if(pmsg->flags & I2C_M_RD) { - DEB2(printk("Doing the last read\n")); - ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER); - } - else if(!(pmsg->flags & I2C_M_RD)) { - DEB2(printk("Doing the last write\n")); - ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER); - } - - return ret; -} -#endif - - -/* Whenever we initiate a transaction, the first byte clocked - * onto the bus after the start condition is the address (7 bit) of the - * device we want to talk to. This function manipulates the address specified - * so that it makes sense to the hardware when written to the IIC peripheral. - * - * Note: 10 bit addresses are not supported in this driver, although they are - * supported by the hardware. This functionality needs to be implemented. - */ -static inline int iic_doAddress(struct i2c_algo_iic_data *adap, - struct i2c_msg *msg, int retries) -{ - unsigned short flags = msg->flags; - unsigned int addr; - int ret; - -/* Ten bit addresses not supported right now */ - if ( (flags & I2C_M_TEN) ) { -#if 0 - addr = 0xf0 | (( msg->addr >> 7) & 0x03); - DEB2(printk("addr0: %d\n",addr)); - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk("iic_doAddress: died at extended address code.\n"); - return -EREMOTEIO; - } - iic_outw(adap,msg->addr & 0x7f); - if (ret != 1) { - printk("iic_doAddress: died at 2nd address code.\n"); - return -EREMOTEIO; - } - if ( flags & I2C_M_RD ) { - i2c_repstart(adap); - addr |= 0x01; - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk("iic_doAddress: died at extended address code.\n"); - return -EREMOTEIO; - } - } -#endif - } else { - - addr = ( msg->addr << 1 ); - -#if 0 - if (flags & I2C_M_RD ) - addr |= 1; - if (flags & I2C_M_REV_DIR_ADDR ) - addr ^= 1; -#endif - - if (iic_inw(adap, ITE_I2CSAR) != addr) { - iic_outw(adap, ITE_I2CSAR, addr); - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk("iic_doAddress: died at address code.\n"); - return -EREMOTEIO; - } - } - - } - - return 0; -} - - -/* Description: Prepares the controller for a transaction (clearing status - * registers, data buffers, etc), and then calls either iic_readbytes or - * iic_sendbytes to do the actual transaction. - * - * still to be done: Before we issue a transaction, we should - * verify that the bus is not busy or in some unknown state. - */ -static int iic_xfer(struct i2c_adapter *i2c_adap, - struct i2c_msg *msgs, - int num) -{ - struct i2c_algo_iic_data *adap = i2c_adap->algo_data; - struct i2c_msg *pmsg; - int i = 0; - int ret, timeout; - - pmsg = &msgs[i]; - - if(!pmsg->len) { - DEB2(printk("iic_xfer: read/write length is 0\n");) - return -EIO; - } - if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) { - DEB2(printk("iic_xfer: write buffer length is not odd\n");) - return -EIO; - } - - /* Wait for any pending transfers to complete */ - timeout = wait_for_bb(adap); - if (timeout) { - DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");) - return -EIO; - } - - /* Flush FIFO */ - iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH); - - /* Load address */ - ret = iic_doAddress(adap, pmsg, i2c_adap->retries); - if (ret) - return -EIO; - -#if 0 - /* Combined transaction (read and write) */ - if(num > 1) { - DEB2(printk("iic_xfer: Call combined transaction\n")); - ret = iic_combined_transaction(i2c_adap, msgs, num); - } -#endif - - DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n", - i, msgs[i].addr, msgs[i].flags, msgs[i].len);) - - if(pmsg->flags & I2C_M_RD) /* Read */ - ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0); - else { /* Write */ - udelay(1000); - ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len); - } - - if (ret != pmsg->len) - DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret)); - else - DEB3(printk("iic_xfer: read/write %d bytes.\n",ret)); - - return ret; -} - - -/* Implements device specific ioctls. Higher level ioctls can - * be found in i2c-core.c and are typical of any i2c controller (specifying - * slave address, timeouts, etc). These ioctls take advantage of any hardware - * features built into the controller for which this algorithm-adapter set - * was written. These ioctls allow you to take control of the data and clock - * lines and set the either high or low, - * similar to a GPIO pin. - */ -static int algo_control(struct i2c_adapter *adapter, - unsigned int cmd, unsigned long arg) -{ - - struct i2c_algo_iic_data *adap = adapter->algo_data; - struct i2c_iic_msg s_msg; - char *buf; - int ret; - - if (cmd == I2C_SREAD) { - if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg, - sizeof(struct i2c_iic_msg))) - return -EFAULT; - buf = kmalloc(s_msg.len, GFP_KERNEL); - if (buf== NULL) - return -ENOMEM; - - /* Flush FIFO */ - iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH); - - /* Load address */ - iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1); - iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff); - - ret = iic_readbytes(adapter, buf, s_msg.len, 1); - if (ret>=0) { - if(copy_to_user( s_msg.buf, buf, s_msg.len) ) - ret = -EFAULT; - } - kfree(buf); - } - return 0; -} - - -static u32 iic_func(struct i2c_adapter *adap) -{ - return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | - I2C_FUNC_PROTOCOL_MANGLING; -} - -/* -----exported algorithm data: ------------------------------------- */ - -static struct i2c_algorithm iic_algo = { - .master_xfer = iic_xfer, - .algo_control = algo_control, /* ioctl */ - .functionality = iic_func, -}; - - -/* - * registering functions to load algorithms at runtime - */ -int i2c_iic_add_bus(struct i2c_adapter *adap) -{ - struct i2c_algo_iic_data *iic_adap = adap->algo_data; - - if (iic_test) { - int ret = test_bus(iic_adap, adap->name); - if (ret<0) - return -ENODEV; - } - - DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n", - adap->name)); - - /* register new adapter to i2c module... */ - adap->algo = &iic_algo; - - adap->timeout = 100; /* default values, should */ - adap->retries = 3; /* be replaced by defines */ - adap->flags = 0; - - iic_init(iic_adap); - return i2c_add_adapter(adap); -} - - -int i2c_iic_del_bus(struct i2c_adapter *adap) -{ - int res; - if ((res = i2c_del_adapter(adap)) < 0) - return res; - DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name)); - - return 0; -} - - -int __init i2c_algo_iic_init (void) -{ - printk(KERN_INFO "ITE iic (i2c) algorithm module\n"); - return 0; -} - - -void i2c_algo_iic_exit(void) -{ - return; -} - - -EXPORT_SYMBOL(i2c_iic_add_bus); -EXPORT_SYMBOL(i2c_iic_del_bus); - -/* The MODULE_* macros resolve to nothing if MODULES is not defined - * when this file is compiled. - */ -MODULE_AUTHOR("MontaVista Software "); -MODULE_DESCRIPTION("ITE iic algorithm"); -MODULE_LICENSE("GPL"); - -module_param(iic_test, bool, 0); -module_param(i2c_debug, int, S_IRUGO | S_IWUSR); - -MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available"); -MODULE_PARM_DESC(i2c_debug, - "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol"); - - -/* This function resolves to init_module (the function invoked when a module - * is loaded via insmod) when this file is compiled with MODULES defined. - * Otherwise (i.e. if you want this driver statically linked to the kernel), - * a pointer to this function is stored in a table and called - * during the initialization of the kernel (in do_basic_setup in /init/main.c) - * - * All this functionality is complements of the macros defined in linux/init.h - */ -module_init(i2c_algo_iic_init); - - -/* If MODULES is defined when this file is compiled, then this function will - * resolved to cleanup_module. - */ -module_exit(i2c_algo_iic_exit); diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h deleted file mode 100644 index a8ca3c9b546a..000000000000 --- a/drivers/i2c/algos/i2c-algo-ite.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - -------------------------------------------------------------------- - i2c-ite.h: Global defines for the I2C controller on board the - ITE MIPS processor. - -------------------------------------------------------------------- - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2001 MontaVista Software Inc. - - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - - */ - -#ifndef I2C_ITE_H -#define I2C_ITE_H 1 - -#include - -/* I2C Registers */ -#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30 -#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34 -#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38 -#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c -#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48 -#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c -#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50 -#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54 - -#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70 -#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74 -#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78 -#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c - - -/* Host Control Register ITE_I2CHCR */ -#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */ -#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing - the current transaction */ -#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */ -#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */ -#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */ -#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute - the command and send the data programmed in - all required registers to I2C bus */ -#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST -#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W -#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R -#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S - -/* Host Status Register ITE_I2CHSR */ -#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except - in the first and last bytes */ -#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */ -#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */ -#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */ -#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */ - -/* Slave Address Register ITE_I2CSAR */ -#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */ -#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the - next slave address is addressed */ - -/* Slave Sub-address Register ITE_I2CSSAR */ -#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */ - -/* Clock Counter Register ITE_I2CCKCNT */ -#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */ -#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */ -#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */ - -/* START Hold Time Register ITE_I2CSHDR */ -/* value is counted based on 16 MHz internal clock */ -#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */ -#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */ - -/* (Repeated) START Setup Time Register ITE_I2CRSUR */ -/* value is counted based on 16 MHz internal clock */ -#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */ -#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */ - -/* STOP setup Time Register ITE_I2CPSUR */ - -/* FIFO Data Register ITE_I2CFDR */ -#define ITE_I2CFDR_MASK 0xff - -/* FIFO Byte Count Register ITE_I2CFBCR */ -#define ITE_I2CFBCR_MASK 0x3f - -/* FIFO Control Register ITE_I2CFCR */ -#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point - and I2CFSR */ -/* FIFO Status Register ITE_I2CFSR */ -#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */ -#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */ -#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */ -#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */ - -#endif /* I2C_ITE_H */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 90f91d039ee2..7c9ab337d180 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -209,18 +209,6 @@ config I2C_ISA tristate depends on I2C -config I2C_ITE - tristate "ITE I2C Adapter" - depends on I2C && MIPS_ITE8172 - select I2C_ALGOITE - help - This supports the ITE8172 I2C peripheral found on some MIPS - systems. Say Y if you have one of these. You should also say Y for - the ITE I2C driver algorithm support above. - - This support is also available as a module. If so, the module - will be called i2c-ite. - config I2C_IXP4XX tristate "IXP4xx GPIO-Based I2C Interface" depends on I2C && ARCH_IXP4XX diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 493c87289b62..bf5fd078b292 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_I2C_I810) += i2c-i810.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_ISA) += i2c-isa.o -obj-$(CONFIG_I2C_ITE) += i2c-ite.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c deleted file mode 100644 index f7d71869b3b9..000000000000 --- a/drivers/i2c/busses/i2c-ite.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - ------------------------------------------------------------------------- - i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system - ------------------------------------------------------------------------- - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2001 MontaVista Software Inc. - - ---------------------------------------------------------------------------- - This file was highly leveraged from i2c-elektor.c, which was created - by Simon G. Vogl and Hans Berglund: - - - Copyright (C) 1995-97 Simon G. Vogl - 1998-99 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki and even - Frodo Looijaard */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "../i2c-ite.h" - -#define DEFAULT_BASE 0x14014030 -#define ITE_IIC_IO_SIZE 0x40 -#define DEFAULT_IRQ 0 -#define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */ -#define DEFAULT_OWN 0x55 - -static int base; -static int irq; -static int clock; -static int own; - -static struct iic_ite gpi; -static wait_queue_head_t iic_wait; -static int iic_pending; -static spinlock_t lock; - -/* ----- local functions ---------------------------------------------- */ - -static void iic_ite_setiic(void *data, int ctl, short val) -{ - unsigned long j = jiffies + 10; - - pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff); -#ifdef DEBUG - while (time_before(jiffies, j)) - schedule(); -#endif - outw(val,ctl); -} - -static short iic_ite_getiic(void *data, int ctl) -{ - short val; - - val = inw(ctl); - pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff); - return (val); -} - -/* Return our slave address. This is the address - * put on the I2C bus when another master on the bus wants to address us - * as a slave - */ -static int iic_ite_getown(void *data) -{ - return (gpi.iic_own); -} - - -static int iic_ite_getclock(void *data) -{ - return (gpi.iic_clock); -} - - -/* Put this process to sleep. We will wake up when the - * IIC controller interrupts. - */ -static void iic_ite_waitforpin(void) { - DEFINE_WAIT(wait); - int timeout = 2; - unsigned long flags; - - /* If interrupts are enabled (which they are), then put the process to - * sleep. This process will be awakened by two events -- either the - * the IIC peripheral interrupts or the timeout expires. - * If interrupts are not enabled then delay for a reasonable amount - * of time and return. - */ - if (gpi.iic_irq > 0) { - spin_lock_irqsave(&lock, flags); - if (iic_pending == 0) { - spin_unlock_irqrestore(&lock, flags); - prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE); - if (schedule_timeout(timeout*HZ)) { - spin_lock_irqsave(&lock, flags); - if (iic_pending == 1) { - iic_pending = 0; - } - spin_unlock_irqrestore(&lock, flags); - } - finish_wait(&iic_wait, &wait); - } else { - iic_pending = 0; - spin_unlock_irqrestore(&lock, flags); - } - } else { - udelay(100); - } -} - - -static irqreturn_t iic_ite_handler(int this_irq, void *dev_id) -{ - spin_lock(&lock); - iic_pending = 1; - spin_unlock(&lock); - - wake_up_interruptible(&iic_wait); - - return IRQ_HANDLED; -} - - -/* Lock the region of memory where I/O registers exist. Request our - * interrupt line and register its associated handler. - */ -static int iic_hw_resrc_init(void) -{ - if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c")) - return -ENODEV; - - if (gpi.iic_irq <= 0) - return 0; - - if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0) - gpi.iic_irq = 0; - else - enable_irq(gpi.iic_irq); - - return 0; -} - - -static void iic_ite_release(void) -{ - if (gpi.iic_irq > 0) { - disable_irq(gpi.iic_irq); - free_irq(gpi.iic_irq, 0); - } - release_region(gpi.iic_base , 2); -} - -/* ------------------------------------------------------------------------ - * Encapsulate the above functions in the correct operations structure. - * This is only done when more than one hardware adapter is supported. - */ -static struct i2c_algo_iic_data iic_ite_data = { - NULL, - iic_ite_setiic, - iic_ite_getiic, - iic_ite_getown, - iic_ite_getclock, - iic_ite_waitforpin, - 80, 80, 100, /* waits, timeout */ -}; - -static struct i2c_adapter iic_ite_ops = { - .owner = THIS_MODULE, - .id = I2C_HW_I_IIC, - .algo_data = &iic_ite_data, - .name = "ITE IIC adapter", -}; - -/* Called when the module is loaded. This function starts the - * cascade of calls up through the hierarchy of i2c modules (i.e. up to the - * algorithm layer and into to the core layer) - */ -static int __init iic_ite_init(void) -{ - - struct iic_ite *piic = &gpi; - - printk(KERN_INFO "Initialize ITE IIC adapter module\n"); - if (base == 0) - piic->iic_base = DEFAULT_BASE; - else - piic->iic_base = base; - - if (irq == 0) - piic->iic_irq = DEFAULT_IRQ; - else - piic->iic_irq = irq; - - if (clock == 0) - piic->iic_clock = DEFAULT_CLOCK; - else - piic->iic_clock = clock; - - if (own == 0) - piic->iic_own = DEFAULT_OWN; - else - piic->iic_own = own; - - iic_ite_data.data = (void *)piic; - init_waitqueue_head(&iic_wait); - spin_lock_init(&lock); - if (iic_hw_resrc_init() == 0) { - if (i2c_iic_add_bus(&iic_ite_ops) < 0) - return -ENODEV; - } else { - return -ENODEV; - } - printk(KERN_INFO " found device at %#x irq %d.\n", - piic->iic_base, piic->iic_irq); - return 0; -} - - -static void iic_ite_exit(void) -{ - i2c_iic_del_bus(&iic_ite_ops); - iic_ite_release(); -} - -/* If modules is NOT defined when this file is compiled, then the MODULE_* - * macros will resolve to nothing - */ -MODULE_AUTHOR("MontaVista Software "); -MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter"); -MODULE_LICENSE("GPL"); - -module_param(base, int, 0); -module_param(irq, int, 0); -module_param(clock, int, 0); -module_param(own, int, 0); - - -/* Called when module is loaded or when kernel is initialized. - * If MODULES is defined when this file is compiled, then this function will - * resolve to init_module (the function called when insmod is invoked for a - * module). Otherwise, this function is called early in the boot, when the - * kernel is intialized. Check out /include/init.h to see how this works. - */ -module_init(iic_ite_init); - -/* Resolves to module_cleanup when MODULES is defined. */ -module_exit(iic_ite_exit); -- cgit v1.2.3 From 41561f28e76a47dc6de0a954da85d0b5c42874eb Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Sun, 10 Dec 2006 21:21:29 +0100 Subject: i2c: New Philips PNX bus driver New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP block). This I2C controller can be found on (at least) PNX010x, PNX52xx and PNX4008 Philips boards. Signed-off-by: Vitaly Wool Signed-off-by: Jean Delvare --- arch/arm/mach-pnx4008/Makefile | 2 +- arch/arm/mach-pnx4008/i2c.c | 167 +++++++++ drivers/i2c/busses/Kconfig | 19 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-pnx.c | 708 +++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-pnx4008/i2c.h | 67 ++++ include/linux/i2c-pnx.h | 43 +++ 7 files changed, 1006 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-pnx4008/i2c.c create mode 100644 drivers/i2c/busses/i2c-pnx.c create mode 100644 include/asm-arm/arch-pnx4008/i2c.h create mode 100644 include/linux/i2c-pnx.h (limited to 'drivers') diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile index b457ca0a431a..777564c90a12 100644 --- a/arch/arm/mach-pnx4008/Makefile +++ b/arch/arm/mach-pnx4008/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o +obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c new file mode 100644 index 000000000000..6f308827c4fe --- /dev/null +++ b/arch/arm/mach-pnx4008/i2c.c @@ -0,0 +1,167 @@ +/* + * I2C initialization for PNX4008. + * + * Author: Vitaly Wool + * + * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +static int set_clock_run(struct platform_device *pdev) +{ + struct clk *clk; + char name[10]; + int retval = 0; + + snprintf(name, 10, "i2c%d_ck", pdev->id); + clk = clk_get(&pdev->dev, name); + if (!IS_ERR(clk)) { + clk_set_rate(clk, 1); + clk_put(clk); + } else + retval = -ENOENT; + + return retval; +} + +static int set_clock_stop(struct platform_device *pdev) +{ + struct clk *clk; + char name[10]; + int retval = 0; + + snprintf(name, 10, "i2c%d_ck", pdev->id); + clk = clk_get(&pdev->dev, name); + if (!IS_ERR(clk)) { + clk_set_rate(clk, 0); + clk_put(clk); + } else + retval = -ENOENT; + + return retval; +} + +static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state) +{ + int retval = 0; +#ifdef CONFIG_PM + retval = set_clock_run(pdev); +#endif + return retval; +} + +static int i2c_pnx_resume(struct platform_device *pdev) +{ + int retval = 0; +#ifdef CONFIG_PM + retval = set_clock_run(pdev); +#endif + return retval; +} + +static u32 calculate_input_freq(struct platform_device *pdev) +{ + return HCLK_MHZ; +} + + +static struct i2c_pnx_algo_data pnx_algo_data0 = { + .base = PNX4008_I2C1_BASE, + .irq = I2C_1_INT, +}; + +static struct i2c_pnx_algo_data pnx_algo_data1 = { + .base = PNX4008_I2C2_BASE, + .irq = I2C_2_INT, +}; + +static struct i2c_pnx_algo_data pnx_algo_data2 = { + .base = (PNX4008_USB_CONFIG_BASE + 0x300), + .irq = USB_I2C_INT, +}; + +static struct i2c_adapter pnx_adapter0 = { + .name = I2C_CHIP_NAME "0", + .algo_data = &pnx_algo_data0, +}; +static struct i2c_adapter pnx_adapter1 = { + .name = I2C_CHIP_NAME "1", + .algo_data = &pnx_algo_data1, +}; + +static struct i2c_adapter pnx_adapter2 = { + .name = "USB-I2C", + .algo_data = &pnx_algo_data2, +}; + +static struct i2c_pnx_data i2c0_data = { + .suspend = i2c_pnx_suspend, + .resume = i2c_pnx_resume, + .calculate_input_freq = calculate_input_freq, + .set_clock_run = set_clock_run, + .set_clock_stop = set_clock_stop, + .adapter = &pnx_adapter0, +}; + +static struct i2c_pnx_data i2c1_data = { + .suspend = i2c_pnx_suspend, + .resume = i2c_pnx_resume, + .calculate_input_freq = calculate_input_freq, + .set_clock_run = set_clock_run, + .set_clock_stop = set_clock_stop, + .adapter = &pnx_adapter1, +}; + +static struct i2c_pnx_data i2c2_data = { + .suspend = i2c_pnx_suspend, + .resume = i2c_pnx_resume, + .calculate_input_freq = calculate_input_freq, + .set_clock_run = set_clock_run, + .set_clock_stop = set_clock_stop, + .adapter = &pnx_adapter2, +}; + +static struct platform_device i2c0_device = { + .name = "pnx-i2c", + .id = 0, + .dev = { + .platform_data = &i2c0_data, + }, +}; + +static struct platform_device i2c1_device = { + .name = "pnx-i2c", + .id = 1, + .dev = { + .platform_data = &i2c1_data, + }, +}; + +static struct platform_device i2c2_device = { + .name = "pnx-i2c", + .id = 2, + .dev = { + .platform_data = &i2c2_data, + }, +}; + +static struct platform_device *devices[] __initdata = { + &i2c0_device, + &i2c1_device, + &i2c2_device, +}; + +void __init pnx4008_register_i2c_devices(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7c9ab337d180..291da25e84d1 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -536,4 +536,23 @@ config I2C_MV64XXX This driver can also be built as a module. If so, the module will be called i2c-mv64xxx. +config I2C_PNX + tristate "I2C bus support for Philips PNX targets" + depends on ARCH_PNX4008 && I2C + help + This driver supports the Philips IP3204 I2C IP block master and/or + slave controller + + This driver can also be built as a module. If so, the module + will be called i2c-pnx. + +config I2C_PNX_EARLY + bool "Early initialization for I2C on PNXxxxx" + depends on I2C_PNX=y + help + Under certain circumstances one may need to make sure I2C on PNXxxxx + is initialized earlier than some other driver that depends on it + (for instance, that might be USB in case of PNX4008). With this + option turned on you can guarantee that. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index bf5fd078b292..626ac71af959 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c new file mode 100644 index 000000000000..de0bca77e926 --- /dev/null +++ b/drivers/i2c/busses/i2c-pnx.c @@ -0,0 +1,708 @@ +/* + * Provides I2C support for Philips PNX010x/PNX4008 boards. + * + * Authors: Dennis Kovalev + * Vitaly Wool + * + * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define I2C_PNX_TIMEOUT 10 /* msec */ +#define I2C_PNX_SPEED_KHZ 100 +#define I2C_PNX_REGION_SIZE 0x100 +#define PNX_DEFAULT_FREQ 13 /* MHz */ + +static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data) +{ + while (timeout > 0 && + (ioread32(I2C_REG_STS(data)) & mstatus_active)) { + mdelay(1); + timeout--; + } + return (timeout <= 0); +} + +static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data) +{ + while (timeout > 0 && + (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) { + mdelay(1); + timeout--; + } + return (timeout <= 0); +} + +static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *data = adap->algo_data; + struct timer_list *timer = &data->mif.timer; + int expires = I2C_PNX_TIMEOUT / (1000 / HZ); + + del_timer_sync(timer); + + dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n", + jiffies, expires); + + timer->expires = jiffies + expires; + timer->data = (unsigned long)adap; + + add_timer(timer); +} + +/** + * i2c_pnx_start - start a device + * @slave_addr: slave address + * @adap: pointer to adapter structure + * + * Generate a START signal in the desired mode. + */ +static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + + dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__, + slave_addr, alg_data->mif.mode); + + /* Check for 7 bit slave addresses only */ + if (slave_addr & ~0x7f) { + dev_err(&adap->dev, "%s: Invalid slave address %x. " + "Only 7-bit addresses are supported\n", + adap->name, slave_addr); + return -EINVAL; + } + + /* First, make sure bus is idle */ + if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) { + /* Somebody else is monopolizing the bus */ + dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, " + "cntrl = %x, stat = %x\n", + adap->name, slave_addr, + ioread32(I2C_REG_CTL(alg_data)), + ioread32(I2C_REG_STS(alg_data))); + return -EBUSY; + } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) { + /* Sorry, we lost the bus */ + dev_err(&adap->dev, "%s: Arbitration failure. " + "Slave addr = %02x\n", adap->name, slave_addr); + return -EIO; + } + + /* + * OK, I2C is enabled and we have the bus. + * Clear the current TDI and AFI status flags. + */ + iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi, + I2C_REG_STS(alg_data)); + + dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__, + (slave_addr << 1) | start_bit | alg_data->mif.mode); + + /* Write the slave address, START bit and R/W bit */ + iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode, + I2C_REG_TX(alg_data)); + + dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__); + + return 0; +} + +/** + * i2c_pnx_stop - stop a device + * @adap: pointer to I2C adapter structure + * + * Generate a STOP signal to terminate the master transaction. + */ +static void i2c_pnx_stop(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + /* Only 1 msec max timeout due to interrupt context */ + long timeout = 1000; + + dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + /* Write a STOP bit to TX FIFO */ + iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data)); + + /* Wait until the STOP is seen. */ + while (timeout > 0 && + (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) { + /* may be called from interrupt context */ + udelay(1); + timeout--; + } + + dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); +} + +/** + * i2c_pnx_master_xmit - transmit data to slave + * @adap: pointer to I2C adapter structure + * + * Sends one byte of data to the slave + */ +static int i2c_pnx_master_xmit(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 val; + + dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + if (alg_data->mif.len > 0) { + /* We still have something to talk about... */ + val = *alg_data->mif.buf++; + + if (alg_data->mif.len == 1) { + val |= stop_bit; + if (!alg_data->last) + val |= start_bit; + } + + alg_data->mif.len--; + iowrite32(val, I2C_REG_TX(alg_data)); + + dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__, + val, alg_data->mif.len + 1); + + if (alg_data->mif.len == 0) { + if (alg_data->last) { + /* Wait until the STOP is seen. */ + if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) + dev_err(&adap->dev, "The bus is still " + "active after timeout\n"); + } + /* Disable master interrupts */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) & + ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie), + I2C_REG_CTL(alg_data)); + + del_timer_sync(&alg_data->mif.timer); + + dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n", + __FUNCTION__); + + complete(&alg_data->mif.complete); + } + } else if (alg_data->mif.len == 0) { + /* zero-sized transfer */ + i2c_pnx_stop(adap); + + /* Disable master interrupts. */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) & + ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie), + I2C_REG_CTL(alg_data)); + + /* Stop timer. */ + del_timer_sync(&alg_data->mif.timer); + dev_dbg(&adap->dev, "%s(): Waking up xfer routine after " + "zero-xfer.\n", __FUNCTION__); + + complete(&alg_data->mif.complete); + } + + dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + return 0; +} + +/** + * i2c_pnx_master_rcv - receive data from slave + * @adap: pointer to I2C adapter structure + * + * Reads one byte data from the slave + */ +static int i2c_pnx_master_rcv(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + unsigned int val = 0; + u32 ctl = 0; + + dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + /* Check, whether there is already data, + * or we didn't 'ask' for it yet. + */ + if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { + dev_dbg(&adap->dev, "%s(): Write dummy data to fill " + "Rx-fifo...\n", __FUNCTION__); + + if (alg_data->mif.len == 1) { + /* Last byte, do not acknowledge next rcv. */ + val |= stop_bit; + if (!alg_data->last) + val |= start_bit; + + /* + * Enable interrupt RFDAIE (data in Rx fifo), + * and disable DRMIE (need data for Tx) + */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl |= mcntrl_rffie | mcntrl_daie; + ctl &= ~mcntrl_drmie; + iowrite32(ctl, I2C_REG_CTL(alg_data)); + } + + /* + * Now we'll 'ask' for data: + * For each byte we want to receive, we must + * write a (dummy) byte to the Tx-FIFO. + */ + iowrite32(val, I2C_REG_TX(alg_data)); + + return 0; + } + + /* Handle data. */ + if (alg_data->mif.len > 0) { + val = ioread32(I2C_REG_RX(alg_data)); + *alg_data->mif.buf++ = (u8) (val & 0xff); + dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val, + alg_data->mif.len); + + alg_data->mif.len--; + if (alg_data->mif.len == 0) { + if (alg_data->last) + /* Wait until the STOP is seen. */ + if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) + dev_err(&adap->dev, "The bus is still " + "active after timeout\n"); + + /* Disable master interrupts */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | + mcntrl_drmie | mcntrl_daie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + /* Kill timer. */ + del_timer_sync(&alg_data->mif.timer); + complete(&alg_data->mif.complete); + } + } + + dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + return 0; +} + +static irqreturn_t +i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 stat, ctl; + struct i2c_adapter *adap = dev_id; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + + dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n", + __FUNCTION__, + ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data)), + alg_data->mif.mode); + stat = ioread32(I2C_REG_STS(alg_data)); + + /* let's see what kind of event this is */ + if (stat & mstatus_afi) { + /* We lost arbitration in the midst of a transfer */ + alg_data->mif.ret = -EIO; + + /* Disable master interrupts. */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | + mcntrl_drmie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + /* Stop timer, to prevent timeout. */ + del_timer_sync(&alg_data->mif.timer); + complete(&alg_data->mif.complete); + } else if (stat & mstatus_nai) { + /* Slave did not acknowledge, generate a STOP */ + dev_dbg(&adap->dev, "%s(): " + "Slave did not acknowledge, generating a STOP.\n", + __FUNCTION__); + i2c_pnx_stop(adap); + + /* Disable master interrupts. */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | + mcntrl_drmie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + /* Our return value. */ + alg_data->mif.ret = -EIO; + + /* Stop timer, to prevent timeout. */ + del_timer_sync(&alg_data->mif.timer); + complete(&alg_data->mif.complete); + } else { + /* + * Two options: + * - Master Tx needs data. + * - There is data in the Rx-fifo + * The latter is only the case if we have requested for data, + * via a dummy write. (See 'i2c_pnx_master_rcv'.) + * We therefore check, as a sanity check, whether that interrupt + * has been enabled. + */ + if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) { + if (alg_data->mif.mode == I2C_SMBUS_WRITE) { + i2c_pnx_master_xmit(adap); + } else if (alg_data->mif.mode == I2C_SMBUS_READ) { + i2c_pnx_master_rcv(adap); + } + } + } + + /* Clear TDI and AFI bits */ + stat = ioread32(I2C_REG_STS(alg_data)); + iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); + + dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data))); + + return IRQ_HANDLED; +} + +static void i2c_pnx_timeout(unsigned long data) +{ + struct i2c_adapter *adap = (struct i2c_adapter *)data; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 ctl; + + dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. " + "Resetting master...\n", + ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data))); + + /* Reset master and disable interrupts */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + ctl |= mcntrl_reset; + iowrite32(ctl, I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + alg_data->mif.ret = -EIO; + complete(&alg_data->mif.complete); +} + +static inline void bus_reset_if_active(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 stat; + + if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) { + dev_err(&adap->dev, + "%s: Bus is still active after xfer. Reset it...\n", + adap->name); + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, + I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) { + /* If there is data in the fifo's after transfer, + * flush fifo's by reset. + */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, + I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + } else if (stat & mstatus_nai) { + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, + I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + } +} + +/** + * i2c_pnx_xfer - generic transfer entry point + * @adap: pointer to I2C adapter structure + * @msgs: array of messages + * @num: number of messages + * + * Initiates the transfer + */ +static int +i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct i2c_msg *pmsg; + int rc = 0, completed = 0, i; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 stat = ioread32(I2C_REG_STS(alg_data)); + + dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n", + __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data))); + + bus_reset_if_active(adap); + + /* Process transactions in a loop. */ + for (i = 0; rc >= 0 && i < num; i++) { + u8 addr; + + pmsg = &msgs[i]; + addr = pmsg->addr; + + if (pmsg->flags & I2C_M_TEN) { + dev_err(&adap->dev, + "%s: 10 bits addr not supported!\n", + adap->name); + rc = -EINVAL; + break; + } + + alg_data->mif.buf = pmsg->buf; + alg_data->mif.len = pmsg->len; + alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ? + I2C_SMBUS_READ : I2C_SMBUS_WRITE; + alg_data->mif.ret = 0; + alg_data->last = (i == num - 1); + + dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__, + alg_data->mif.mode, + alg_data->mif.len); + + i2c_pnx_arm_timer(adap); + + /* initialize the completion var */ + init_completion(&alg_data->mif.complete); + + /* Enable master interrupt */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie | + mcntrl_naie | mcntrl_drmie, + I2C_REG_CTL(alg_data)); + + /* Put start-code and slave-address on the bus. */ + rc = i2c_pnx_start(addr, adap); + if (rc < 0) + break; + + /* Wait for completion */ + wait_for_completion(&alg_data->mif.complete); + + if (!(rc = alg_data->mif.ret)) + completed++; + dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n", + __FUNCTION__, rc); + + /* Clear TDI and AFI bits in case they are set. */ + if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) { + dev_dbg(&adap->dev, + "%s: TDI still set... clearing now.\n", + adap->name); + iowrite32(stat, I2C_REG_STS(alg_data)); + } + if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) { + dev_dbg(&adap->dev, + "%s: AFI still set... clearing now.\n", + adap->name); + iowrite32(stat, I2C_REG_STS(alg_data)); + } + } + + bus_reset_if_active(adap); + + /* Cleanup to be sure... */ + alg_data->mif.buf = NULL; + alg_data->mif.len = 0; + + dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + if (completed != num) + return ((rc < 0) ? rc : -EREMOTEIO); + + return num; +} + +static u32 i2c_pnx_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm pnx_algorithm = { + .master_xfer = i2c_pnx_xfer, + .functionality = i2c_pnx_func, +}; + +static int i2c_pnx_controller_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); + return i2c_pnx->suspend(pdev, state); +} + +static int i2c_pnx_controller_resume(struct platform_device *pdev) +{ + struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); + return i2c_pnx->resume(pdev); +} + +static int __devinit i2c_pnx_probe(struct platform_device *pdev) +{ + unsigned long tmp; + int ret = 0; + struct i2c_pnx_algo_data *alg_data; + int freq_mhz; + struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data; + + if (!i2c_pnx || !i2c_pnx->adapter) { + dev_err(&pdev->dev, "%s: no platform data supplied\n", + __FUNCTION__); + ret = -EINVAL; + goto out; + } + + platform_set_drvdata(pdev, i2c_pnx); + + if (i2c_pnx->calculate_input_freq) + freq_mhz = i2c_pnx->calculate_input_freq(pdev); + else { + freq_mhz = PNX_DEFAULT_FREQ; + dev_info(&pdev->dev, "Setting bus frequency to default value: " + "%d MHz", freq_mhz); + } + + i2c_pnx->adapter->algo = &pnx_algorithm; + + alg_data = i2c_pnx->adapter->algo_data; + init_timer(&alg_data->mif.timer); + alg_data->mif.timer.function = i2c_pnx_timeout; + alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter; + + /* Register I/O resource */ + if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) { + dev_err(&pdev->dev, + "I/O region 0x%08x for I2C already in use.\n", + alg_data->base); + ret = -ENODEV; + goto out_drvdata; + } + + if (!(alg_data->ioaddr = + (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) { + dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n"); + ret = -ENOMEM; + goto out_release; + } + + i2c_pnx->set_clock_run(pdev); + + /* + * Clock Divisor High This value is the number of system clocks + * the serial clock (SCL) will be high. + * For example, if the system clock period is 50 ns and the maximum + * desired serial period is 10000 ns (100 kHz), then CLKHI would be + * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value + * programmed into CLKHI will vary from this slightly due to + * variations in the output pad's rise and fall times as well as + * the deglitching filter length. + */ + + tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2; + iowrite32(tmp, I2C_REG_CKH(alg_data)); + iowrite32(tmp, I2C_REG_CKL(alg_data)); + + iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data)); + if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) { + ret = -ENODEV; + goto out_unmap; + } + init_completion(&alg_data->mif.complete); + + ret = request_irq(alg_data->irq, i2c_pnx_interrupt, + 0, pdev->name, i2c_pnx->adapter); + if (ret) + goto out_clock; + + /* Register this adapter with the I2C subsystem */ + i2c_pnx->adapter->dev.parent = &pdev->dev; + ret = i2c_add_adapter(i2c_pnx->adapter); + if (ret < 0) { + dev_err(&pdev->dev, "I2C: Failed to add bus\n"); + goto out_irq; + } + + dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n", + i2c_pnx->adapter->name, alg_data->base, alg_data->irq); + + return 0; + +out_irq: + free_irq(alg_data->irq, alg_data); +out_clock: + i2c_pnx->set_clock_stop(pdev); +out_unmap: + iounmap((void *)alg_data->ioaddr); +out_release: + release_region(alg_data->base, I2C_PNX_REGION_SIZE); +out_drvdata: + platform_set_drvdata(pdev, NULL); +out: + return ret; +} + +static int __devexit i2c_pnx_remove(struct platform_device *pdev) +{ + struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); + struct i2c_adapter *adap = i2c_pnx->adapter; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + + free_irq(alg_data->irq, alg_data); + i2c_del_adapter(adap); + i2c_pnx->set_clock_stop(pdev); + iounmap((void *)alg_data->ioaddr); + release_region(alg_data->base, I2C_PNX_REGION_SIZE); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver i2c_pnx_driver = { + .driver = { + .name = "pnx-i2c", + .owner = THIS_MODULE, + }, + .probe = i2c_pnx_probe, + .remove = __devexit_p(i2c_pnx_remove), + .suspend = i2c_pnx_controller_suspend, + .resume = i2c_pnx_controller_resume, +}; + +static int __init i2c_adap_pnx_init(void) +{ + return platform_driver_register(&i2c_pnx_driver); +} + +static void __exit i2c_adap_pnx_exit(void) +{ + platform_driver_unregister(&i2c_pnx_driver); +} + +MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev "); +MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_I2C_PNX_EARLY +/* We need to make sure I2C is initialized before USB */ +subsys_initcall(i2c_adap_pnx_init); +#else +mudule_init(i2c_adap_pnx_init); +#endif +module_exit(i2c_adap_pnx_exit); diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h new file mode 100644 index 000000000000..92e8d65006f7 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/i2c.h @@ -0,0 +1,67 @@ +/* + * PNX4008-specific tweaks for I2C IP3204 block + * + * Author: Vitaly Wool + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_ARCH_I2C_H__ +#define __ASM_ARCH_I2C_H__ + +#include +#include + +enum { + mstatus_tdi = 0x00000001, + mstatus_afi = 0x00000002, + mstatus_nai = 0x00000004, + mstatus_drmi = 0x00000008, + mstatus_active = 0x00000020, + mstatus_scl = 0x00000040, + mstatus_sda = 0x00000080, + mstatus_rff = 0x00000100, + mstatus_rfe = 0x00000200, + mstatus_tff = 0x00000400, + mstatus_tfe = 0x00000800, +}; + +enum { + mcntrl_tdie = 0x00000001, + mcntrl_afie = 0x00000002, + mcntrl_naie = 0x00000004, + mcntrl_drmie = 0x00000008, + mcntrl_daie = 0x00000020, + mcntrl_rffie = 0x00000040, + mcntrl_tffie = 0x00000080, + mcntrl_reset = 0x00000100, + mcntrl_cdbmode = 0x00000400, +}; + +enum { + rw_bit = 1 << 0, + start_bit = 1 << 8, + stop_bit = 1 << 9, +}; + +#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ +#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ +#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ +#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ +#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ +#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ +#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ +#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ +#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ +#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ +#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ +#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ +#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ + +#define HCLK_MHZ 13 +#define I2C_CHIP_NAME "PNX4008-I2C" + +#endif /* __ASM_ARCH_I2C_H___ */ diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h new file mode 100644 index 000000000000..e6e9c814da61 --- /dev/null +++ b/include/linux/i2c-pnx.h @@ -0,0 +1,43 @@ +/* + * Header file for I2C support on PNX010x/4008. + * + * Author: Dennis Kovalev + * + * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __I2C_PNX_H__ +#define __I2C_PNX_H__ + +#include + +struct i2c_pnx_mif { + int ret; /* Return value */ + int mode; /* Interface mode */ + struct completion complete; /* I/O completion */ + struct timer_list timer; /* Timeout */ + char * buf; /* Data buffer */ + int len; /* Length of data buffer */ +}; + +struct i2c_pnx_algo_data { + u32 base; + u32 ioaddr; + int irq; + struct i2c_pnx_mif mif; + int last; +}; + +struct i2c_pnx_data { + int (*suspend) (struct platform_device *pdev, pm_message_t state); + int (*resume) (struct platform_device *pdev); + u32 (*calculate_input_freq) (struct platform_device *pdev); + int (*set_clock_run) (struct platform_device *pdev); + int (*set_clock_stop) (struct platform_device *pdev); + struct i2c_adapter *adapter; +}; + +#endif /* __I2C_PNX_H__ */ -- cgit v1.2.3 From 31c095b09ea2fe6a4c752fccaabd9025e1c6e7c7 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Sun, 10 Dec 2006 21:21:29 +0100 Subject: i2c: Add request/release_mem_region to i2c-ibm_iic bus driver Reserving I/O memory for a driver with request_mem_region is necessary to avoid memory access conflicts. Even if it's never going to happen, it is cleaner and it allows to monitor I/O memory used in /proc/iomem. Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ibm_iic.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 781a99c1647a..1898e9987021 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -680,6 +680,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){ dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); + if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs), + "ibm_iic")) { + ret = -EBUSY; + goto fail1; + } + if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){ printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n", dev->idx); @@ -750,6 +756,8 @@ fail: iounmap(dev->vaddr); fail2: + release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); +fail1: ocp_set_drvdata(ocp, NULL); kfree(dev); return ret; @@ -777,6 +785,7 @@ static void __devexit iic_remove(struct ocp_device *ocp) free_irq(dev->irq, dev); } iounmap(dev->vaddr); + release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); kfree(dev); } } -- cgit v1.2.3 From ad04d5c3879dcf79ba0fa1826eab991f7b7a2de8 Mon Sep 17 00:00:00 2001 From: Hans-Frieder Vogt Date: Sun, 10 Dec 2006 21:21:29 +0100 Subject: i2c: Cleanups to the i2c-nforce2 bus driver Summary of changes: - fixes: o legacy I/O region size is 64 bytes, not 8 bytes - general cleanup: o removed code for the unsupported I2C block data, block data, proc call and block proc call transfer modes o removed detail warnings about unsupported modes that are covered in a general warning (unsupported transaction...) anyway o removed necessity of a definition of struct i2c_adapter o moved definition of struct i2c_algorithm, making forward declarations of nforce2_access and nforce2_func unnecessary - minor changes: o in the description mention the nForce 5xx chipsets o changes my e-mail address in MODULE_AUTHOR Theses cleanups shrink the driver binary size from 4.0 kB to 2.7 kB on i386. Signed-off-by: Hans-Frieder Vogt Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-nforce2 | 2 +- drivers/i2c/busses/i2c-nforce2.c | 89 ++++++------------------------------ 2 files changed, 15 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2 index 5465ed0f4379..7f61fbc03f7f 100644 --- a/Documentation/i2c/busses/i2c-nforce2 +++ b/Documentation/i2c/busses/i2c-nforce2 @@ -14,7 +14,7 @@ Datasheet: not publicly available, but seems to be similar to the AMD-8111 SMBus 2.0 adapter. Authors: - Hans-Frieder Vogt , + Hans-Frieder Vogt , Thomas Leibold , Patrick Dreker diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index e0292e414ab2..ad37c10e7fec 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -35,7 +35,7 @@ nForce4 MCP55 0368 This driver supports the 2 SMBuses that are included in the MCP of the - nForce2/3/4 chipsets. + nForce2/3/4/5xx chipsets. */ /* Note: we assume there can only be one nForce2, with two SMBus interfaces */ @@ -52,8 +52,8 @@ #include MODULE_LICENSE("GPL"); -MODULE_AUTHOR ("Hans-Frieder Vogt "); -MODULE_DESCRIPTION("nForce2 SMBus driver"); +MODULE_AUTHOR ("Hans-Frieder Vogt "); +MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver"); struct nforce2_smbus { @@ -80,9 +80,6 @@ struct nforce2_smbus { #define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */ #define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */ #define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */ -#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */ -#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */ -#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */ #define NVIDIA_SMB_STS_DONE 0x80 #define NVIDIA_SMB_STS_ALRM 0x40 @@ -95,40 +92,17 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_BYTE 0x04 #define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06 #define NVIDIA_SMB_PRTCL_WORD_DATA 0x08 -#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a -#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c -#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d -#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define NVIDIA_SMB_PRTCL_PEC 0x80 static struct pci_driver nforce2_driver; -static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data *data); -static u32 nforce2_func(struct i2c_adapter *adapter); - - -static const struct i2c_algorithm smbus_algorithm = { - .smbus_xfer = nforce2_access, - .functionality = nforce2_func, -}; - -static struct i2c_adapter nforce2_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, - .algo = &smbus_algorithm, -}; - -/* Return -1 on error. See smbus.h for more information */ +/* Return -1 on error */ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec, temp; - unsigned char len = 0; /* to keep the compiler quiet */ - int i; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : NVIDIA_SMB_PRTCL_WRITE; @@ -163,35 +137,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec; break; - case I2C_SMBUS_BLOCK_DATA: - outb_p(command, NVIDIA_SMB_CMD); - if (read_write == I2C_SMBUS_WRITE) { - len = min_t(u8, data->block[0], 32); - outb_p(len, NVIDIA_SMB_BCNT); - for (i = 0; i < len; i++) - outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); - } - protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec; - break; - - case I2C_SMBUS_I2C_BLOCK_DATA: - len = min_t(u8, data->block[0], 32); - outb_p(command, NVIDIA_SMB_CMD); - outb_p(len, NVIDIA_SMB_BCNT); - if (read_write == I2C_SMBUS_WRITE) - for (i = 0; i < len; i++) - outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); - protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA; - break; - - case I2C_SMBUS_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; - - case I2C_SMBUS_BLOCK_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); - return -1; - default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -227,19 +172,8 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_WORD_DATA: - /* case I2C_SMBUS_PROC_CALL: not supported */ data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8); break; - - case I2C_SMBUS_BLOCK_DATA: - /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */ - len = inb_p(NVIDIA_SMB_BCNT); - len = min_t(u8, len, 32); - case I2C_SMBUS_I2C_BLOCK_DATA: - for (i = 0; i < len; i++) - data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); - data->block[0] = len; - break; } return 0; @@ -250,10 +184,14 @@ static u32 nforce2_func(struct i2c_adapter *adapter) { /* other functionality might be possible, but is not tested */ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* | - I2C_FUNC_SMBUS_BLOCK_DATA */; + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA; } +static struct i2c_algorithm smbus_algorithm = { + .smbus_xfer = nforce2_access, + .functionality = nforce2_func, +}; + static struct pci_device_id nforce2_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) }, @@ -267,7 +205,6 @@ static struct pci_device_id nforce2_ids[] = { { 0 } }; - MODULE_DEVICE_TABLE (pci, nforce2_ids); @@ -291,7 +228,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, } smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; - smbus->size = 8; + smbus->size = 64; } smbus->dev = dev; @@ -300,7 +237,9 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->base, smbus->base+smbus->size-1, name); return -1; } - smbus->adapter = nforce2_adapter; + smbus->adapter.owner = THIS_MODULE; + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; smbus->adapter.dev.parent = &dev->dev; snprintf(smbus->adapter.name, I2C_NAME_SIZE, -- cgit v1.2.3 From 6ea23039cb1cc7c379eb5fba0ed2c53291e9bea7 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sun, 10 Dec 2006 21:21:30 +0100 Subject: i2c: Add support for nested i2c bus locking This patch adds the 'level' field into the i2c_adapter structure, which is used to represent the 'logical' level of nesting for the purposes of lockdep. This field is then used in the i2c_transfer() function, to acquire the per-adapter bus_lock with correct nesting level. Signed-off-by: Jiri Kosina Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 2 +- include/linux/i2c.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7ca81f42d14b..79eaa12474dd 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -603,7 +603,7 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) } #endif - mutex_lock(&adap->bus_lock); + mutex_lock_nested(&adap->bus_lock, adap->level); ret = adap->algo->master_xfer(adap,msgs,num); mutex_unlock(&adap->bus_lock); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 9b5d04768c2c..08df4169b411 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -216,6 +216,7 @@ struct i2c_adapter { int (*client_unregister)(struct i2c_client *); /* data fields that are valid for all devices */ + u8 level; /* nesting level for lockdep */ struct mutex bus_lock; struct mutex clist_lock; -- cgit v1.2.3 From 813e30e9ab917f5493147451cfdbf6356a3dcee0 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Sun, 10 Dec 2006 21:21:30 +0100 Subject: i2c: New Atmel AT91 bus driver Add support for the I2C (Two-wire interface) controller integrated in the Atmel AT91RM9200 processor. This driver should also be usable on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor Signed-off-by: Mark M. Hoffman Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 7 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-at91.c | 325 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 333 insertions(+) create mode 100644 drivers/i2c/busses/i2c-at91.c (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 291da25e84d1..ab398b700586 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -74,6 +74,13 @@ config I2C_AMD8111 This driver can also be built as a module. If so, the module will be called i2c-amd8111. +config I2C_AT91 + tristate "Atmel AT91 I2C Two-Wire interface (TWI)" + depends on I2C && ARCH_AT91 && EXPERIMENTAL + help + This supports the use of the I2C interface on Atmel AT91 + processors. + config I2C_AU1550 tristate "Au1550/Au1200 SMBus interface" depends on I2C && (SOC_AU1550 || SOC_AU1200) diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 626ac71af959..a82b6bfad046 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o +obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c new file mode 100644 index 000000000000..67f91bdda089 --- /dev/null +++ b/drivers/i2c/busses/i2c-at91.c @@ -0,0 +1,325 @@ +/* + i2c Support for Atmel's AT91 Two-Wire Interface (TWI) + + Copyright (C) 2004 Rick Bronson + Converted to 2.6 by Andrew Victor + + Borrowed heavily from original work by: + Copyright (C) 2000 Philip Edelbrock + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ + + +static struct clk *twi_clk; +static void __iomem *twi_base; + +#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) +#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) + + +/* + * Initialize the TWI hardware registers. + */ +static void __devinit at91_twi_hwinit(void) +{ + unsigned long cdiv, ckdiv; + + at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ + + /* Calcuate clock dividers */ + cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; + cdiv = cdiv + 1; /* round up */ + ckdiv = 0; + while (cdiv > 255) { + ckdiv++; + cdiv = cdiv >> 1; + } + + if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ + if (ckdiv > 5) { + printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); + ckdiv = 5; + } + } + + at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); +} + +/* + * Poll the i2c status register until the specified bit is set. + * Returns 0 if timed out (100 msec). + */ +static short at91_poll_status(unsigned long bit) +{ + int loop_cntr = 10000; + + do { + udelay(10); + } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0)); + + return (loop_cntr > 0); +} + +static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) +{ + /* Send Start */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + + /* Read data */ + while (length--) { + if (!length) /* need to send Stop before reading last byte */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); + if (!at91_poll_status(AT91_TWI_RXRDY)) { + dev_dbg(&adap->dev, "RXRDY timeout\n"); + return -ETIMEDOUT; + } + *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff); + } + + return 0; +} + +static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) +{ + /* Load first byte into transmitter */ + at91_twi_write(AT91_TWI_THR, *buf++); + + /* Send Start */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + + do { + if (!at91_poll_status(AT91_TWI_TXRDY)) { + dev_dbg(&adap->dev, "TXRDY timeout\n"); + return -ETIMEDOUT; + } + + length--; /* byte was transmitted */ + + if (length > 0) /* more data to send? */ + at91_twi_write(AT91_TWI_THR, *buf++); + } while (length); + + /* Send Stop */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); + + return 0; +} + +/* + * Generic i2c master transfer entrypoint. + * + * Note: We do not use Atmel's feature of storing the "internal device address". + * Instead the "internal device address" has to be written using a seperate + * i2c message. + * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html + */ +static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num) +{ + int i, ret; + + dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); + + for (i = 0; i < num; i++) { + dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i, + pmsg->flags & I2C_M_RD ? "read" : "writ", + pmsg->len, pmsg->len > 1 ? "s" : "", + pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); + + at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16) + | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); + + if (pmsg->len && pmsg->buf) { /* sanity check */ + if (pmsg->flags & I2C_M_RD) + ret = xfer_read(adap, pmsg->buf, pmsg->len); + else + ret = xfer_write(adap, pmsg->buf, pmsg->len); + + if (ret) + return ret; + + /* Wait until transfer is finished */ + if (!at91_poll_status(AT91_TWI_TXCOMP)) { + dev_dbg(&adap->dev, "TXCOMP timeout\n"); + return -ETIMEDOUT; + } + } + dev_dbg(&adap->dev, "transfer complete\n"); + pmsg++; /* next message */ + } + return i; +} + +/* + * Return list of supported functionality. + */ +static u32 at91_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm at91_algorithm = { + .master_xfer = at91_xfer, + .functionality = at91_func, +}; + +/* + * Main initialization routine. + */ +static int __devinit at91_i2c_probe(struct platform_device *pdev) +{ + struct i2c_adapter *adapter; + struct resource *res; + int rc; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c")) + return -EBUSY; + + twi_base = ioremap(res->start, res->end - res->start + 1); + if (!twi_base) { + rc = -ENOMEM; + goto fail0; + } + + twi_clk = clk_get(NULL, "twi_clk"); + if (IS_ERR(twi_clk)) { + dev_err(&pdev->dev, "no clock defined\n"); + rc = -ENODEV; + goto fail1; + } + + adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + if (adapter == NULL) { + dev_err(&pdev->dev, "can't allocate inteface!\n"); + rc = -ENOMEM; + goto fail2; + } + sprintf(adapter->name, "AT91"); + adapter->algo = &at91_algorithm; + adapter->class = I2C_CLASS_HWMON; + adapter->dev.parent = &pdev->dev; + + platform_set_drvdata(pdev, adapter); + + clk_enable(twi_clk); /* enable peripheral clock */ + at91_twi_hwinit(); /* initialize TWI controller */ + + rc = i2c_add_adapter(adapter); + if (rc) { + dev_err(&pdev->dev, "Adapter %s registration failed\n", + adapter->name); + goto fail3; + } + + dev_info(&pdev->dev, "AT91 i2c bus driver.\n"); + return 0; + +fail3: + platform_set_drvdata(pdev, NULL); + kfree(adapter); + clk_disable(twi_clk); +fail2: + clk_put(twi_clk); +fail1: + iounmap(twi_base); +fail0: + release_mem_region(res->start, res->end - res->start + 1); + + return rc; +} + +static int __devexit at91_i2c_remove(struct platform_device *pdev) +{ + struct i2c_adapter *adapter = platform_get_drvdata(pdev); + struct resource *res; + int rc; + + rc = i2c_del_adapter(adapter); + platform_set_drvdata(pdev, NULL); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(twi_base); + release_mem_region(res->start, res->end - res->start + 1); + + clk_disable(twi_clk); /* disable peripheral clock */ + clk_put(twi_clk); + + return rc; +} + +#ifdef CONFIG_PM + +/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */ + +static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + clk_disable(twi_clk); + return 0; +} + +static int at91_i2c_resume(struct platform_device *pdev) +{ + return clk_enable(twi_clk); +} + +#else +#define at91_i2c_suspend NULL +#define at91_i2c_resume NULL +#endif + +static struct platform_driver at91_i2c_driver = { + .probe = at91_i2c_probe, + .remove = __devexit_p(at91_i2c_remove), + .suspend = at91_i2c_suspend, + .resume = at91_i2c_resume, + .driver = { + .name = "at91_i2c", + .owner = THIS_MODULE, + }, +}; + +static int __init at91_i2c_init(void) +{ + return platform_driver_register(&at91_i2c_driver); +} + +static void __exit at91_i2c_exit(void) +{ + platform_driver_unregister(&at91_i2c_driver); +} + +module_init(at91_i2c_init); +module_exit(at91_i2c_exit); + +MODULE_AUTHOR("Rick Bronson"); +MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 2c003e8e1c0c241aec162ba9ec781089c5b2ff3f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:30 +0100 Subject: i2c: Use put_user instead of copy_to_user where possible This speeds up the I2C_FUNCS ioctl by 5 to 8% in my tests. Signed-off-by: Jean Delvare Laughed-at-by: Mark M. Hoffman --- drivers/i2c/i2c-dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 2e22a2ffa606..d66cefc63df7 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -193,8 +193,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, return 0; case I2C_FUNCS: funcs = i2c_get_functionality(client->adapter); - return (copy_to_user((unsigned long __user *)arg, &funcs, - sizeof(unsigned long)))?-EFAULT:0; + return put_user(funcs, (unsigned long __user *)arg); case I2C_RDWR: if (copy_from_user(&rdwr_arg, -- cgit v1.2.3 From 438d6c2c015cf63bf7e9bdc2033d435433ac8455 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 10 Dec 2006 21:21:31 +0100 Subject: i2c: Whitespace cleanups Remove extraneous whitespace from various i2c headers and core files, like space-before-tab and whitespace at end of line. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 54 ++++++++++++++++---------------- drivers/i2c/i2c-dev.c | 34 ++++++++++---------- include/linux/i2c-algo-bit.h | 4 +-- include/linux/i2c-algo-pcf.h | 2 +- include/linux/i2c-id.h | 10 +++--- include/linux/i2c.h | 74 ++++++++++++++++++++++---------------------- 6 files changed, 89 insertions(+), 89 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 79eaa12474dd..64f11e00651c 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -127,7 +127,7 @@ static ssize_t show_client_name(struct device *dev, struct device_attribute *att return sprintf(buf, "%s\n", client->name); } -/* +/* * We can't use the DEVICE_ATTR() macro here as we want the same filename for a * different type of a device. So beware if the DEVICE_ATTR() macro ever * changes, this definition will also have to change. @@ -139,8 +139,8 @@ static struct device_attribute dev_attr_client_name = { /* --------------------------------------------------- - * registering functions - * --------------------------------------------------- + * registering functions + * --------------------------------------------------- */ /* ----- @@ -314,7 +314,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) res = driver_register(&driver->driver); if (res) return res; - + mutex_lock(&core_lists); list_add_tail(&driver->list,&drivers); @@ -338,13 +338,13 @@ int i2c_del_driver(struct i2c_driver *driver) struct list_head *item1, *item2, *_n; struct i2c_client *client; struct i2c_adapter *adap; - + int res = 0; mutex_lock(&core_lists); /* Have a look at each adapter, if clients of this driver are still - * attached. If so, detach them to be able to kill the driver + * attached. If so, detach them to be able to kill the driver * afterwards. */ list_for_each(item1,&adapters) { @@ -419,14 +419,14 @@ int i2c_attach_client(struct i2c_client *client) goto out_unlock; } list_add_tail(&client->list,&adapter->clients); - + client->usage_count = 0; client->dev.parent = &client->adapter->dev; client->dev.driver = &client->driver->driver; client->dev.bus = &i2c_bus_type; client->dev.release = &i2c_client_release; - + snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), "%d-%04x", i2c_adapter_id(adapter), client->addr); dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n", @@ -467,7 +467,7 @@ int i2c_detach_client(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; int res = 0; - + if (client->usage_count > 0) { dev_warn(&client->dev, "Client [%s] still busy, " "can't detach\n", client->name); @@ -535,10 +535,10 @@ int i2c_release_client(struct i2c_client *client) __FUNCTION__); return -EPERM; } - + client->usage_count--; i2c_dec_use_client(client); - + return 0; } @@ -624,7 +624,7 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count) msg.flags = client->flags & I2C_M_TEN; msg.len = count; msg.buf = (char *)buf; - + ret = i2c_transfer(adap, &msg, 1); /* If everything went ok (i.e. 1 msg transmitted), return #bytes @@ -757,7 +757,7 @@ int i2c_probe(struct i2c_adapter *adapter, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { if (address_data->probe[0] == I2C_CLIENT_END && address_data->normal_i2c[0] == I2C_CLIENT_END) - return 0; + return 0; dev_warn(&adapter->dev, "SMBus Quick command not supported, " "can't probe for chips\n"); @@ -817,7 +817,7 @@ int i2c_probe(struct i2c_adapter *adapter, struct i2c_adapter* i2c_get_adapter(int id) { struct i2c_adapter *adapter; - + mutex_lock(&core_lists); adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id); if (adapter && !try_module_get(adapter->owner)) @@ -834,14 +834,14 @@ void i2c_put_adapter(struct i2c_adapter *adap) /* The SMBus parts */ -#define POLY (0x1070U << 3) +#define POLY (0x1070U << 3) static u8 crc8(u16 data) { int i; - + for(i = 0; i < 8; i++) { - if (data & 0x8000) + if (data & 0x8000) data = data ^ POLY; data = data << 1; } @@ -891,13 +891,13 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) rpec, cpec); return -1; } - return 0; + return 0; } s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value) { return i2c_smbus_xfer(client->adapter,client->addr,client->flags, - value,0,I2C_SMBUS_QUICK,NULL); + value,0,I2C_SMBUS_QUICK,NULL); } s32 i2c_smbus_read_byte(struct i2c_client *client) @@ -996,11 +996,11 @@ s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, I2C_SMBUS_I2C_BLOCK_DATA, &data); } -/* Simulate a SMBus command using the i2c protocol +/* Simulate a SMBus command using the i2c protocol No checking of parameters is done! */ -static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, +static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int size, + char read_write, u8 command, int size, union i2c_smbus_data * data) { /* So we need to generate a series of msgs. In the case of writing, we @@ -1010,7 +1010,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; int num = read_write == I2C_SMBUS_READ?2:1; - struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, + struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, { addr, flags | I2C_M_RD, 0, msgbuf1 } }; int i; @@ -1103,14 +1103,14 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, if (i) { /* Compute PEC if first message is a write */ if (!(msg[0].flags & I2C_M_RD)) { - if (num == 1) /* Write only */ + if (num == 1) /* Write only */ i2c_smbus_add_pec(&msg[0]); else /* Write followed by read */ partial_pec = i2c_smbus_msg_pec(0, &msg[0]); } /* Ask for PEC if last message is a read */ if (msg[num-1].flags & I2C_M_RD) - msg[num-1].len++; + msg[num-1].len++; } if (i2c_transfer(adapter, msg, num) < 0) @@ -1130,7 +1130,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, case I2C_SMBUS_BYTE_DATA: data->byte = msgbuf1[0]; break; - case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_WORD_DATA: case I2C_SMBUS_PROC_CALL: data->word = msgbuf1[0] | (msgbuf1[1] << 8); break; @@ -1146,7 +1146,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int size, + char read_write, u8 command, int size, union i2c_smbus_data * data) { s32 res; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index d66cefc63df7..cf9381eae8da 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -1,5 +1,5 @@ /* - i2c-dev.c - i2c-bus driver, char device interface + i2c-dev.c - i2c-bus driver, char device interface Copyright (C) 1995-97 Simon G. Vogl Copyright (C) 1998-99 Frodo Looijaard @@ -172,7 +172,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, switch ( cmd ) { case I2C_SLAVE: case I2C_SLAVE_FORCE: - if ((arg > 0x3ff) || + if ((arg > 0x3ff) || (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f)) return -EINVAL; if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg)) @@ -196,8 +196,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, return put_user(funcs, (unsigned long __user *)arg); case I2C_RDWR: - if (copy_from_user(&rdwr_arg, - (struct i2c_rdwr_ioctl_data __user *)arg, + if (copy_from_user(&rdwr_arg, + (struct i2c_rdwr_ioctl_data __user *)arg, sizeof(rdwr_arg))) return -EFAULT; @@ -205,9 +205,9 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, * be sent at once */ if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS) return -EINVAL; - + rdwr_pa = (struct i2c_msg *) - kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), + kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), GFP_KERNEL); if (rdwr_pa == NULL) return -ENOMEM; @@ -277,9 +277,9 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, (struct i2c_smbus_ioctl_data __user *) arg, sizeof(struct i2c_smbus_ioctl_data))) return -EFAULT; - if ((data_arg.size != I2C_SMBUS_BYTE) && + if ((data_arg.size != I2C_SMBUS_BYTE) && (data_arg.size != I2C_SMBUS_QUICK) && - (data_arg.size != I2C_SMBUS_BYTE_DATA) && + (data_arg.size != I2C_SMBUS_BYTE_DATA) && (data_arg.size != I2C_SMBUS_WORD_DATA) && (data_arg.size != I2C_SMBUS_PROC_CALL) && (data_arg.size != I2C_SMBUS_BLOCK_DATA) && @@ -290,11 +290,11 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, data_arg.size); return -EINVAL; } - /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, + /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, so the check is valid if size==I2C_SMBUS_QUICK too. */ - if ((data_arg.read_write != I2C_SMBUS_READ) && + if ((data_arg.read_write != I2C_SMBUS_READ) && (data_arg.read_write != I2C_SMBUS_WRITE)) { - dev_dbg(&client->adapter->dev, + dev_dbg(&client->adapter->dev, "read_write out of range (%x) in ioctl I2C_SMBUS.\n", data_arg.read_write); return -EINVAL; @@ -303,7 +303,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, /* Note that command values are always valid! */ if ((data_arg.size == I2C_SMBUS_QUICK) || - ((data_arg.size == I2C_SMBUS_BYTE) && + ((data_arg.size == I2C_SMBUS_BYTE) && (data_arg.read_write == I2C_SMBUS_WRITE))) /* These are special: we do not use data */ return i2c_smbus_xfer(client->adapter, client->addr, @@ -321,14 +321,14 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, if ((data_arg.size == I2C_SMBUS_BYTE_DATA) || (data_arg.size == I2C_SMBUS_BYTE)) datasize = sizeof(data_arg.data->byte); - else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || + else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || (data_arg.size == I2C_SMBUS_PROC_CALL)) datasize = sizeof(data_arg.data->word); else /* size == smbus block, i2c block, or block proc. call */ datasize = sizeof(data_arg.data->block); - if ((data_arg.size == I2C_SMBUS_PROC_CALL) || - (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || + if ((data_arg.size == I2C_SMBUS_PROC_CALL) || + (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || (data_arg.read_write == I2C_SMBUS_WRITE)) { if (copy_from_user(&temp, data_arg.data, datasize)) return -EFAULT; @@ -336,8 +336,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, res = i2c_smbus_xfer(client->adapter,client->addr,client->flags, data_arg.read_write, data_arg.command,data_arg.size,&temp); - if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || - (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || + if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || + (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || (data_arg.read_write == I2C_SMBUS_READ))) { if (copy_to_user(data_arg.data, &temp, datasize)) return -EFAULT; diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index c8f8df25c7e0..a99e28a86c3b 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -26,9 +26,9 @@ /* --- Defines for bit-adapters --------------------------------------- */ /* - * This struct contains the hw-dependent functions of bit-style adapters to + * This struct contains the hw-dependent functions of bit-style adapters to * manipulate the line states, and to init any hw-specific features. This is - * only used if you have more than one hw-type of adapter running. + * only used if you have more than one hw-type of adapter running. */ struct i2c_algo_bit_data { void *data; /* private data for lowlevel routines */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 9908f3fc4839..7d7045cbb344 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -31,7 +31,7 @@ struct i2c_algo_pcf_data { int (*getpcf) (void *data, int ctl); int (*getown) (void *data); int (*getclock) (void *data); - void (*waitforpin) (void); + void (*waitforpin) (void); /* local settings */ int udelay; diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 00da370bbcd6..5b97f1cce7a5 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c-id.h - identifier values for i2c drivers and adapters */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-1999 Simon G. Vogl @@ -40,10 +40,10 @@ #define I2C_DRIVERID_SAA7120 11 /* video encoder */ #define I2C_DRIVERID_SAA7121 12 /* video encoder */ #define I2C_DRIVERID_SAA7185B 13 /* video encoder */ -#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ +#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ #define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */ #define I2C_DRIVERID_PCF8582C 16 /* eeprom */ -#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ +#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ #define I2C_DRIVERID_TEA6300 18 /* audio mixer */ #define I2C_DRIVERID_BT829 19 /* pc to tv encoder */ #define I2C_DRIVERID_TDA9850 20 /* audio mixer */ @@ -162,7 +162,7 @@ * ---- Adapter types ---------------------------------------------------- */ -/* --- Bit algorithm adapters */ +/* --- Bit algorithm adapters */ #define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ #define I2C_HW_B_SER 0x010002 /* Serial line interface */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 08df4169b411..71e50d3e492f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c.h - definitions for the i2c-bus interface */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-2000 Simon G. Vogl @@ -27,7 +27,7 @@ #define _LINUX_I2C_H #include -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include #include #include @@ -53,8 +53,8 @@ union i2c_smbus_data; /* * The master routines are the ones normally used to transmit data to devices - * on a bus (or read from them). Apart from two basic transfer functions to - * transmit one message at a time, a more complex version can be used to + * on a bus (or read from them). Apart from two basic transfer functions to + * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ extern int i2c_master_send(struct i2c_client *,const char* ,int); @@ -67,10 +67,10 @@ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, - and probably just as fast. + and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ -extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, +extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -112,14 +112,14 @@ struct i2c_driver { /* Notifies the driver that a new bus has appeared. This routine * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it + * & seek for the presence of the chip(s) it supports. If found, it * registers the client(s) that are on the bus to the i2c admin. via * i2c_attach_client. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it + /* tells the driver that a client is about to be deleted & gives it * the chance to remove its private data. Also, if the client struct * has been dynamically allocated by the driver in the function above, * it must be freed here. @@ -139,13 +139,13 @@ struct i2c_driver { #define I2C_NAME_SIZE 50 /* - * i2c_client identifies a single device (i.e. chip) that is connected to an + * i2c_client identifies a single device (i.e. chip) that is connected to an * i2c bus. The behaviour is defined by the routines of the driver. This * function is mainly used for lookup & other admin. functions. */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned short addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ @@ -182,14 +182,14 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) */ struct i2c_algorithm { /* If an adapter algorithm can't do I2C-level access, set master_xfer - to NULL. If an adapter algorithm can do SMBus access, set + to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated using common I2C messages */ /* master_xfer should return the number of messages successfully processed, or a negative value on error */ - int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, + int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); - int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, + int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -317,7 +317,7 @@ extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); */ -extern int i2c_probe(struct i2c_adapter *adapter, +extern int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); @@ -353,15 +353,15 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) */ struct i2c_msg { __u16 addr; /* slave address */ - __u16 flags; + __u16 flags; #define I2C_M_TEN 0x10 /* we have a ten bit chip address */ #define I2C_M_RD 0x01 #define I2C_M_NOSTART 0x4000 #define I2C_M_REV_DIR_ADDR 0x2000 #define I2C_M_IGNORE_NAK 0x1000 #define I2C_M_NO_RD_ACK 0x0800 - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ + __u16 len; /* msg length */ + __u8 *buf; /* pointer to msg data */ }; /* To determine what functionality is present */ @@ -371,16 +371,16 @@ struct i2c_msg { #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ @@ -407,10 +407,10 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ I2C_FUNC_SMBUS_I2C_BLOCK) -/* - * Data for SMBus Messages +/* + * Data for SMBus Messages */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ union i2c_smbus_data { __u8 byte; __u16 word; @@ -422,11 +422,11 @@ union i2c_smbus_data { #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 -/* SMBus transaction types (size parameter in the above functions) +/* SMBus transaction types (size parameter in the above functions) Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ #define I2C_SMBUS_QUICK 0 #define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_BYTE_DATA 2 #define I2C_SMBUS_WORD_DATA 3 #define I2C_SMBUS_PROC_CALL 4 #define I2C_SMBUS_BLOCK_DATA 5 @@ -435,15 +435,15 @@ union i2c_smbus_data { /* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the + * note that additional calls are defined in the algorithm and hw + * dependent layers - these can be listed here, or see the * corresponding header files. */ /* -> bit-adapter specific ioctls */ #define I2C_RETRIES 0x0701 /* number of times a device address */ /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ + /* acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ /* this is for i2c-dev.c */ -- cgit v1.2.3 From 7b77d065d1e79a9c0b1b114d059b3bc3d8206c4d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:31 +0100 Subject: i2c: Use the __ATTR macro where possible Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 64f11e00651c..3e31f1d265c9 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -128,14 +128,11 @@ static ssize_t show_client_name(struct device *dev, struct device_attribute *att } /* - * We can't use the DEVICE_ATTR() macro here as we want the same filename for a - * different type of a device. So beware if the DEVICE_ATTR() macro ever - * changes, this definition will also have to change. + * We can't use the DEVICE_ATTR() macro here, as we used the same name for + * an i2c adapter attribute (above). */ -static struct device_attribute dev_attr_client_name = { - .attr = {.name = "name", .mode = S_IRUGO, .owner = THIS_MODULE }, - .show = &show_client_name, -}; +static struct device_attribute dev_attr_client_name = + __ATTR(name, S_IRUGO, &show_client_name, NULL); /* --------------------------------------------------- -- cgit v1.2.3 From 763d9c046a2e511ec090a8986d3f85edf7448e7e Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Sun, 10 Dec 2006 21:21:31 +0100 Subject: i2c: fix broken ds1337 initialization On a custom board with ds1337 RTC I found that upgrade from 2.6.15 to 2.6.18 broke RTC support. The main problem are changes to ds1337_init_client(). When a ds1337 recognizes a problem (e.g. power or clock failure) bit 7 in status register is set. This has to be reset by writing 0 to status register. But since there are only 16 byte written to the chip and the first byte is interpreted as an address, the status register (which is the 16th) is never written. The other problem is, that initializing all registers to zero is not valid for day, date and month register. Funny enough this is checked by ds1337_detect(), which depends on this values not being zero. So then treated by ds1337_init_client() the ds1337 is not detected anymore, whereas the failure bit in the status register is still set. Signed-off-by: Dirk Stieler Signed-off-by: Dirk Eibach Signed-off-by: Jean Delvare --- drivers/i2c/chips/ds1337.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 93d483b8b770..ec17d6b684a2 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -347,13 +347,19 @@ static void ds1337_init_client(struct i2c_client *client) if ((status & 0x80) || (control & 0x80)) { /* RTC not running */ - u8 buf[16]; + u8 buf[1+16]; /* First byte is interpreted as address */ struct i2c_msg msg[1]; dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__); /* Initialize all, including STATUS and CONTROL to zero */ memset(buf, 0, sizeof(buf)); + + /* Write valid values in the date/time registers */ + buf[1+DS1337_REG_DAY] = 1; + buf[1+DS1337_REG_DATE] = 1; + buf[1+DS1337_REG_MONTH] = 1; + msg[0].addr = client->addr; msg[0].flags = 0; msg[0].len = sizeof(buf); -- cgit v1.2.3 From 6b65cd742823f78a6538491982159098ab5fcae1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 10 Dec 2006 21:21:32 +0100 Subject: i2c: New ARM Versatile/Realview bus driver Add support for the I2C bus found on the ARM Versatile and Realview platforms. The I2C bus has a RTC and optionally some EEPROMs attached. Signed-off-by: Russell King Signed-off-by: Jean Delvare --- arch/arm/mach-realview/core.c | 13 +++ arch/arm/mach-realview/core.h | 1 + arch/arm/mach-realview/realview_eb.c | 1 + arch/arm/mach-versatile/core.c | 14 ++++ drivers/i2c/busses/Kconfig | 11 +++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-versatile.c | 153 +++++++++++++++++++++++++++++++++++ 7 files changed, 194 insertions(+) create mode 100644 drivers/i2c/busses/i2c-versatile.c (limited to 'drivers') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 68c67053f479..84d3fe76e94e 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -141,6 +141,19 @@ struct platform_device realview_smc91x_device = { .resource = realview_smc91x_resources, }; +static struct resource realview_i2c_resource = { + .start = REALVIEW_I2C_BASE, + .end = REALVIEW_I2C_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +struct platform_device realview_i2c_device = { + .name = "versatile-i2c", + .id = -1, + .num_resources = 1, + .resource = &realview_i2c_resource, +}; + #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) static unsigned int realview_mmc_status(struct device *dev) diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 93e86d9f439c..2b53420f9c1b 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -108,6 +108,7 @@ static struct amba_device name##_device = { \ extern struct platform_device realview_flash_device; extern struct platform_device realview_smc91x_device; +extern struct platform_device realview_i2c_device; extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; extern struct clk realview_clcd_clk; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 84a959530fb6..9741b4d3c9cf 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -155,6 +155,7 @@ static void __init realview_eb_init(void) platform_device_register(&realview_flash_device); platform_device_register(&realview_smc91x_device); + platform_device_register(&realview_i2c_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 57196947559f..bf71507c76fd 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -325,6 +325,19 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource versatile_i2c_resource = { + .start = VERSATILE_I2C_BASE, + .end = VERSATILE_I2C_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device versatile_i2c_device = { + .name = "versatile-i2c", + .id = -1, + .num_resources = 1, + .resource = &versatile_i2c_resource, +}; + #define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) unsigned int mmc_status(struct device *dev) @@ -775,6 +788,7 @@ void __init versatile_init(void) clk_register(&versatile_clcd_clk); platform_device_register(&versatile_flash_device); + platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ab398b700586..e1989f3a2684 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -476,6 +476,17 @@ config I2C_STUB If you don't know what to do here, definitely say N. +config I2C_VERSATILE + tristate "ARM Versatile/Realview I2C bus support" + depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW) + select I2C_ALGOBIT + help + Say yes if you want to support the I2C serial bus on ARMs Versatile + range of platforms. + + This driver can also be built as a module. If so, the module + will be called i2c-versatile. + config I2C_VIA tristate "VIA 82C586B" depends on I2C && PCI && EXPERIMENTAL diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index a82b6bfad046..37196c1d0794 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o obj-$(CONFIG_I2C_STUB) += i2c-stub.o +obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_VIA) += i2c-via.o obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c new file mode 100644 index 000000000000..081d9578ce10 --- /dev/null +++ b/drivers/i2c/busses/i2c-versatile.c @@ -0,0 +1,153 @@ +/* + * i2c-versatile.c + * + * Copyright (C) 2006 ARM Ltd. + * written by Russell King, Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include + +#define I2C_CONTROL 0x00 +#define I2C_CONTROLS 0x00 +#define I2C_CONTROLC 0x04 +#define SCL (1 << 0) +#define SDA (1 << 1) + +struct i2c_versatile { + struct i2c_adapter adap; + struct i2c_algo_bit_data algo; + void __iomem *base; +}; + +static void i2c_versatile_setsda(void *data, int state) +{ + struct i2c_versatile *i2c = data; + + writel(SDA, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC)); +} + +static void i2c_versatile_setscl(void *data, int state) +{ + struct i2c_versatile *i2c = data; + + writel(SCL, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC)); +} + +static int i2c_versatile_getsda(void *data) +{ + struct i2c_versatile *i2c = data; + return !!(readl(i2c->base + I2C_CONTROL) & SDA); +} + +static int i2c_versatile_getscl(void *data) +{ + struct i2c_versatile *i2c = data; + return !!(readl(i2c->base + I2C_CONTROL) & SCL); +} + +static struct i2c_algo_bit_data i2c_versatile_algo = { + .setsda = i2c_versatile_setsda, + .setscl = i2c_versatile_setscl, + .getsda = i2c_versatile_getsda, + .getscl = i2c_versatile_getscl, + .udelay = 30, + .timeout = HZ, +}; + +static int i2c_versatile_probe(struct platform_device *dev) +{ + struct i2c_versatile *i2c; + struct resource *r; + int ret; + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!r) { + ret = -EINVAL; + goto err_out; + } + + if (!request_mem_region(r->start, r->end - r->start + 1, "versatile-i2c")) { + ret = -EBUSY; + goto err_out; + } + + i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL); + if (!i2c) { + ret = -ENOMEM; + goto err_release; + } + + i2c->base = ioremap(r->start, r->end - r->start + 1); + if (!i2c->base) { + ret = -ENOMEM; + goto err_free; + } + + writel(SCL | SDA, i2c->base + I2C_CONTROLS); + + i2c->adap.owner = THIS_MODULE; + strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name)); + i2c->adap.algo_data = &i2c->algo; + i2c->adap.dev.parent = &dev->dev; + i2c->algo = i2c_versatile_algo; + i2c->algo.data = i2c; + + ret = i2c_bit_add_bus(&i2c->adap); + if (ret >= 0) { + platform_set_drvdata(dev, i2c); + return 0; + } + + iounmap(i2c->base); + err_free: + kfree(i2c); + err_release: + release_mem_region(r->start, r->end - r->start + 1); + err_out: + return ret; +} + +static int i2c_versatile_remove(struct platform_device *dev) +{ + struct i2c_versatile *i2c = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + i2c_del_adapter(&i2c->adap); + return 0; +} + +static struct platform_driver i2c_versatile_driver = { + .probe = i2c_versatile_probe, + .remove = i2c_versatile_remove, + .driver = { + .name = "versatile-i2c", + .owner = THIS_MODULE, + }, +}; + +static int __init i2c_versatile_init(void) +{ + return platform_driver_register(&i2c_versatile_driver); +} + +static void __exit i2c_versatile_exit(void) +{ + platform_driver_unregister(&i2c_versatile_driver); +} + +module_init(i2c_versatile_init); +module_exit(i2c_versatile_exit); + +MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 3269711b76ba27b78862c48398b0d313ccaa99c2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:33 +0100 Subject: i2c: Discard the i2c algo del_bus wrappers They are all only calling i2c_del_adapter, so we may as well do it directly. Signed-off-by: Jean Delvare --- drivers/acorn/char/i2c.c | 2 +- drivers/i2c/algos/i2c-algo-bit.c | 8 -------- drivers/i2c/algos/i2c-algo-pca.c | 7 ------- drivers/i2c/algos/i2c-algo-pcf.c | 8 -------- drivers/i2c/algos/i2c-algo-sgi.c | 8 -------- drivers/i2c/busses/i2c-elektor.c | 2 +- drivers/i2c/busses/i2c-hydra.c | 2 +- drivers/i2c/busses/i2c-i810.c | 6 +++--- drivers/i2c/busses/i2c-ixp2000.c | 2 +- drivers/i2c/busses/i2c-ixp4xx.c | 2 +- drivers/i2c/busses/i2c-parport-light.c | 2 +- drivers/i2c/busses/i2c-parport.c | 2 +- drivers/i2c/busses/i2c-pca-isa.c | 2 +- drivers/i2c/busses/i2c-prosavage.c | 2 +- drivers/i2c/busses/i2c-savage4.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- drivers/i2c/busses/i2c-voodoo3.c | 6 +++--- drivers/i2c/busses/scx200_i2c.c | 2 +- drivers/ieee1394/pcilynx.c | 2 +- drivers/media/dvb/pluto2/pluto2.c | 8 ++++---- drivers/media/video/bt8xx/bttv-i2c.c | 6 +----- drivers/media/video/cx88/cx88-core.c | 2 +- drivers/media/video/cx88/cx88-vp3054-i2c.c | 2 +- drivers/media/video/vino.c | 2 +- drivers/media/video/zoran_card.c | 2 +- drivers/video/aty/radeon_i2c.c | 8 ++++---- drivers/video/i810/i810-i2c.c | 6 +++--- drivers/video/intelfb/intelfb_i2c.c | 4 ++-- drivers/video/matrox/i2c-matroxfb.c | 2 +- drivers/video/nvidia/nv_i2c.c | 6 +++--- drivers/video/riva/rivafb-i2c.c | 6 +++--- drivers/video/savage/savagefb-i2c.c | 2 +- include/linux/i2c-algo-bit.h | 1 - include/linux/i2c-algo-pca.h | 1 - include/linux/i2c-algo-pcf.h | 1 - include/linux/i2c-algo-sgi.h | 1 - 36 files changed, 45 insertions(+), 84 deletions(-) (limited to 'drivers') diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c index bdb9c8b78ed8..9e584a7af434 100644 --- a/drivers/acorn/char/i2c.c +++ b/drivers/acorn/char/i2c.c @@ -360,7 +360,7 @@ static int __init i2c_ioc_init(void) if (ret >= 0){ ret = misc_register(&rtc_dev); if(ret < 0) - i2c_bit_del_bus(&ioc_ops); + i2c_del_adapter(&ioc_ops); } return ret; diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 21c36bfb5e6b..95aa5395a5be 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -540,15 +540,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap) return i2c_add_adapter(adap); } - - -int i2c_bit_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_bit_add_bus); -EXPORT_SYMBOL(i2c_bit_del_bus); MODULE_AUTHOR("Simon G. Vogl "); MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm"); diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 9081c9fbcd29..36fdf971f080 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -381,14 +381,7 @@ int i2c_pca_add_bus(struct i2c_adapter *adap) return rval; } - -int i2c_pca_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_pca_add_bus); -EXPORT_SYMBOL(i2c_pca_del_bus); MODULE_AUTHOR("Ian Campbell "); MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm"); diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 3b2003398966..ecb2c2d7d540 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -486,15 +486,7 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap) return rval; } - - -int i2c_pcf_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_pcf_add_bus); -EXPORT_SYMBOL(i2c_pcf_del_bus); MODULE_AUTHOR("Hans Berglund "); MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm"); diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c index 490d99997fd0..ac2d5053078a 100644 --- a/drivers/i2c/algos/i2c-algo-sgi.c +++ b/drivers/i2c/algos/i2c-algo-sgi.c @@ -171,15 +171,7 @@ int i2c_sgi_add_bus(struct i2c_adapter *adap) return i2c_add_adapter(adap); } - - -int i2c_sgi_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_sgi_add_bus); -EXPORT_SYMBOL(i2c_sgi_del_bus); MODULE_AUTHOR("Ladislav Michl "); MODULE_DESCRIPTION("I2C-Bus SGI algorithm"); diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index a591fe685f06..834967464814 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -293,7 +293,7 @@ static int __init i2c_pcfisa_init(void) static void i2c_pcfisa_exit(void) { - i2c_pcf_del_bus(&pcf_isa_ops); + i2c_del_adapter(&pcf_isa_ops); if (irq > 0) { disable_irq(irq); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 457d48a0ab9d..9832f773651d 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -146,7 +146,7 @@ static int __devinit hydra_probe(struct pci_dev *dev, static void __devexit hydra_remove(struct pci_dev *dev) { pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */ - i2c_bit_del_bus(&hydra_adap); + i2c_del_adapter(&hydra_adap); iounmap(hydra_bit_data.data); release_mem_region(pci_resource_start(dev, 0)+ offsetof(struct Hydra, CachePD), 4); diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index b66fb6bb1870..10c98bc88aa6 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -219,14 +219,14 @@ static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id return retval; retval = i2c_bit_add_bus(&i810_ddc_adapter); if (retval) - i2c_bit_del_bus(&i810_i2c_adapter); + i2c_del_adapter(&i810_i2c_adapter); return retval; } static void __devexit i810_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&i810_ddc_adapter); - i2c_bit_del_bus(&i810_i2c_adapter); + i2c_del_adapter(&i810_ddc_adapter); + i2c_del_adapter(&i810_i2c_adapter); iounmap(ioaddr); } diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index dd3f4cd3aa68..efa3ecc5522a 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -90,7 +90,7 @@ static int ixp2000_i2c_remove(struct platform_device *plat_dev) platform_set_drvdata(plat_dev, NULL); - i2c_bit_del_bus(&drv_data->adapter); + i2c_del_adapter(&drv_data->adapter); kfree(drv_data); diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 68fe863f9d54..08e89b83984a 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -91,7 +91,7 @@ static int ixp4xx_i2c_remove(struct platform_device *plat_dev) platform_set_drvdata(plat_dev, NULL); - i2c_bit_del_bus(&drv_data->adapter); + i2c_del_adapter(&drv_data->adapter); kfree(drv_data); diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 5eb2bd294fd9..4bc42810b9aa 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -163,7 +163,7 @@ static void __exit i2c_parport_exit(void) if (adapter_parm[type].init.val) line_set(0, &adapter_parm[type].init); - i2c_bit_del_bus(&parport_adapter); + i2c_del_adapter(&parport_adapter); release_region(base, 3); } diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 48a829431c7b..66696a40c7b5 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -218,7 +218,7 @@ static void i2c_parport_detach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); - i2c_bit_del_bus(&adapter->adapter); + i2c_del_adapter(&adapter->adapter); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 407840b6a260..cc6536a19eca 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -156,7 +156,7 @@ static int __init pca_isa_init(void) static void pca_isa_exit(void) { - i2c_pca_del_bus(&pca_isa_ops); + i2c_del_adapter(&pca_isa_ops); if (irq > 0) { disable_irq(irq); diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 7745e21874a8..07c1f1e27df1 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -212,7 +212,7 @@ static void prosavage_remove(struct pci_dev *dev) if (chip->i2c_bus[i].adap_ok == 0) continue; - ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap); + ret = i2c_del_adapter(&chip->i2c_bus[i].adap); if (ret) { dev_err(&dev->dev, "%s not removed\n", chip->i2c_bus[i].adap.name); diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 209f47ea1750..844b4ff90893 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -173,7 +173,7 @@ static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_ static void __devexit savage4_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&savage4_i2c_adapter); + i2c_del_adapter(&savage4_i2c_adapter); iounmap(ioaddr); } diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 910e200ad500..15d7e00e47e6 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -151,7 +151,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i static void __devexit vt586b_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&vt586b_adapter); + i2c_del_adapter(&vt586b_adapter); release_region(I2C_DIR, IOSPACE); pm_io_base = 0; } diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index 6c8d25183382..b0377b81744b 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -211,14 +211,14 @@ static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_ return retval; retval = i2c_bit_add_bus(&voodoo3_ddc_adapter); if (retval) - i2c_bit_del_bus(&voodoo3_i2c_adapter); + i2c_del_adapter(&voodoo3_i2c_adapter); return retval; } static void __devexit voodoo3_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&voodoo3_i2c_adapter); - i2c_bit_del_bus(&voodoo3_ddc_adapter); + i2c_del_adapter(&voodoo3_i2c_adapter); + i2c_del_adapter(&voodoo3_ddc_adapter); iounmap(ioaddr); } diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index 8ddbae4fafe6..6cd96e43aa72 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -116,7 +116,7 @@ static int scx200_i2c_init(void) static void scx200_i2c_cleanup(void) { - i2c_bit_del_bus(&scx200_i2c_ops); + i2c_del_adapter(&scx200_i2c_ops); } module_init(scx200_i2c_init); diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index 13a617917bf2..fbb7f14ec509 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1485,7 +1485,7 @@ static int __devinit add_card(struct pci_dev *dev, } - i2c_bit_del_bus(i2c_ad); + i2c_del_adapter(i2c_ad); kfree(i2c_ad); } } diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 8e4ce101eb22..ffda71dfdd65 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -650,7 +650,7 @@ static int __devinit pluto2_probe(struct pci_dev *pdev, /* dvb */ ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev); if (ret < 0) - goto err_i2c_bit_del_bus; + goto err_i2c_del_adapter; dvb_adapter = &pluto->dvb_adapter; @@ -712,8 +712,8 @@ err_dvb_dmx_release: dvb_dmx_release(dvbdemux); err_dvb_unregister_adapter: dvb_unregister_adapter(dvb_adapter); -err_i2c_bit_del_bus: - i2c_bit_del_bus(&pluto->i2c_adap); +err_i2c_del_adapter: + i2c_del_adapter(&pluto->i2c_adap); err_pluto_hw_exit: pluto_hw_exit(pluto); err_free_irq: @@ -748,7 +748,7 @@ static void __devexit pluto2_remove(struct pci_dev *pdev) dvb_dmxdev_release(&pluto->dmxdev); dvb_dmx_release(dvbdemux); dvb_unregister_adapter(dvb_adapter); - i2c_bit_del_bus(&pluto->i2c_adap); + i2c_del_adapter(&pluto->i2c_adap); pluto_hw_exit(pluto); free_irq(pdev->irq, pluto); pci_iounmap(pdev, pluto->io_mem); diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c index 70de6c96e201..62b873076e09 100644 --- a/drivers/media/video/bt8xx/bttv-i2c.c +++ b/drivers/media/video/bt8xx/bttv-i2c.c @@ -479,11 +479,7 @@ int __devexit fini_bttv_i2c(struct bttv *btv) if (0 != btv->i2c_rc) return 0; - if (btv->use_i2c_hw) { - return i2c_del_adapter(&btv->c.i2c_adap); - } else { - return i2c_bit_del_bus(&btv->c.i2c_adap); - } + return i2c_del_adapter(&btv->c.i2c_adap); } /* diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index 4b655f2ef278..453af5e943ff 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -1153,7 +1153,7 @@ void cx88_core_put(struct cx88_core *core, struct pci_dev *pci) mutex_lock(&devlist); cx88_ir_fini(core); if (0 == core->i2c_rc) - i2c_bit_del_bus(&core->i2c_adap); + i2c_del_adapter(&core->i2c_adap); list_del(&core->devlist); iounmap(core->lmmio); cx88_devcount--; diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c index 2b4f1970c7df..6068c9bf82cd 100644 --- a/drivers/media/video/cx88/cx88-vp3054-i2c.c +++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c @@ -168,7 +168,7 @@ void vp3054_i2c_remove(struct cx8802_dev *dev) dev->core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO) return; - i2c_bit_del_bus(&vp3054_i2c->adap); + i2c_del_adapter(&vp3054_i2c->adap); kfree(vp3054_i2c); } diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 6b6dff4d236a..a373c142e742 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -782,7 +782,7 @@ static int vino_i2c_add_bus(void) static int vino_i2c_del_bus(void) { - return i2c_sgi_del_bus(&vino_i2c_adapter); + return i2c_del_adapter(&vino_i2c_adapter); } static int i2c_camera_command(unsigned int cmd, void *arg) diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 653822ce391c..4d1eb2fba34a 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -849,7 +849,7 @@ zoran_register_i2c (struct zoran *zr) static void zoran_unregister_i2c (struct zoran *zr) { - i2c_bit_del_bus((&zr->i2c_adapter)); + i2c_del_adapter(&zr->i2c_adapter); } /* Check a zoran_params struct for correctness, insert default params */ diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 869725a13c21..e7c5b219ad1b 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -120,19 +120,19 @@ void radeon_create_i2c_busses(struct radeonfb_info *rinfo) void radeon_delete_i2c_busses(struct radeonfb_info *rinfo) { if (rinfo->i2c[0].rinfo) - i2c_bit_del_bus(&rinfo->i2c[0].adapter); + i2c_del_adapter(&rinfo->i2c[0].adapter); rinfo->i2c[0].rinfo = NULL; if (rinfo->i2c[1].rinfo) - i2c_bit_del_bus(&rinfo->i2c[1].adapter); + i2c_del_adapter(&rinfo->i2c[1].adapter); rinfo->i2c[1].rinfo = NULL; if (rinfo->i2c[2].rinfo) - i2c_bit_del_bus(&rinfo->i2c[2].adapter); + i2c_del_adapter(&rinfo->i2c[2].adapter); rinfo->i2c[2].rinfo = NULL; if (rinfo->i2c[3].rinfo) - i2c_bit_del_bus(&rinfo->i2c[3].adapter); + i2c_del_adapter(&rinfo->i2c[3].adapter); rinfo->i2c[3].rinfo = NULL; } diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index b952e4504abe..961f4d404467 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -137,15 +137,15 @@ void i810_create_i2c_busses(struct i810fb_par *par) void i810_delete_i2c_busses(struct i810fb_par *par) { if (par->chan[0].par) - i2c_bit_del_bus(&par->chan[0].adapter); + i2c_del_adapter(&par->chan[0].adapter); par->chan[0].par = NULL; if (par->chan[1].par) - i2c_bit_del_bus(&par->chan[1].adapter); + i2c_del_adapter(&par->chan[1].adapter); par->chan[1].par = NULL; if (par->chan[2].par) - i2c_bit_del_bus(&par->chan[2].adapter); + i2c_del_adapter(&par->chan[2].adapter); par->chan[2].par = NULL; } diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index 5686e2164e39..33bc41f50540 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -188,11 +188,11 @@ void intelfb_delete_i2c_busses(struct intelfb_info *dinfo) for (i = 0; i < MAX_OUTPUTS; i++) { if (dinfo->output[i].i2c_bus.dinfo) { - i2c_bit_del_bus(&dinfo->output[i].i2c_bus.adapter); + i2c_del_adapter(&dinfo->output[i].i2c_bus.adapter); dinfo->output[i].i2c_bus.dinfo = NULL; } if (dinfo->output[i].ddc_bus.dinfo) { - i2c_bit_del_bus(&dinfo->output[i].ddc_bus.adapter); + i2c_del_adapter(&dinfo->output[i].ddc_bus.adapter); dinfo->output[i].ddc_bus.dinfo = NULL; } } diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c index 795c1a99a680..797b42305b0f 100644 --- a/drivers/video/matrox/i2c-matroxfb.c +++ b/drivers/video/matrox/i2c-matroxfb.c @@ -124,7 +124,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, static void i2c_bit_bus_del(struct i2c_bit_adapter* b) { if (b->initialized) { - i2c_bit_del_bus(&b->adapter); + i2c_del_adapter(&b->adapter); b->initialized = 0; } } diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 442e85328341..8454adf2d178 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -147,15 +147,15 @@ void nvidia_create_i2c_busses(struct nvidia_par *par) void nvidia_delete_i2c_busses(struct nvidia_par *par) { if (par->chan[0].par) - i2c_bit_del_bus(&par->chan[0].adapter); + i2c_del_adapter(&par->chan[0].adapter); par->chan[0].par = NULL; if (par->chan[1].par) - i2c_bit_del_bus(&par->chan[1].adapter); + i2c_del_adapter(&par->chan[1].adapter); par->chan[1].par = NULL; if (par->chan[2].par) - i2c_bit_del_bus(&par->chan[2].adapter); + i2c_del_adapter(&par->chan[2].adapter); par->chan[2].par = NULL; } diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c index c15b259af644..01b85e3b0ae1 100644 --- a/drivers/video/riva/rivafb-i2c.c +++ b/drivers/video/riva/rivafb-i2c.c @@ -144,15 +144,15 @@ void riva_create_i2c_busses(struct riva_par *par) void riva_delete_i2c_busses(struct riva_par *par) { if (par->chan[0].par) - i2c_bit_del_bus(&par->chan[0].adapter); + i2c_del_adapter(&par->chan[0].adapter); par->chan[0].par = NULL; if (par->chan[1].par) - i2c_bit_del_bus(&par->chan[1].adapter); + i2c_del_adapter(&par->chan[1].adapter); par->chan[1].par = NULL; if (par->chan[2].par) - i2c_bit_del_bus(&par->chan[2].adapter); + i2c_del_adapter(&par->chan[2].adapter); par->chan[2].par = NULL; } diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index cef5bf591cdf..1411f3b6a009 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -208,7 +208,7 @@ void savagefb_delete_i2c_busses(struct fb_info *info) struct savagefb_par *par = info->par; if (par->chan.par) - i2c_bit_del_bus(&par->chan.adapter); + i2c_del_adapter(&par->chan.adapter); par->chan.par = NULL; } diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index a99e28a86c3b..937da70cb4c4 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -44,6 +44,5 @@ struct i2c_algo_bit_data { }; int i2c_bit_add_bus(struct i2c_adapter *); -int i2c_bit_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_BIT_H */ diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index 226693e0d88b..fce47c051bb1 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -10,6 +10,5 @@ struct i2c_algo_pca_data { }; int i2c_pca_add_bus(struct i2c_adapter *); -int i2c_pca_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCA_H */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 7d7045cbb344..994eb86f882c 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -39,6 +39,5 @@ struct i2c_algo_pcf_data { }; int i2c_pcf_add_bus(struct i2c_adapter *); -int i2c_pcf_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCF_H */ diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h index 4a0113d64064..3b7715024e69 100644 --- a/include/linux/i2c-algo-sgi.h +++ b/include/linux/i2c-algo-sgi.h @@ -22,6 +22,5 @@ struct i2c_algo_sgi_data { }; int i2c_sgi_add_bus(struct i2c_adapter *); -int i2c_sgi_del_bus(struct i2c_adapter *); #endif /* I2C_ALGO_SGI_H */ -- cgit v1.2.3 From 250d1bd3f4ed0b50d79b3ec81ccefbabb203f916 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:33 +0100 Subject: i2c: Enable PEC on more i2c-i801 devices Enable PEC on recent Intel SMBus controllers (ICH6, ICH7, ICH8, ICH9 and ESB2.) Signed-off-by: Jean Delvare Acked-by: Jason Gaston --- drivers/i2c/busses/i2c-i801.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index c7be2fdbd86b..ae625b854470 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -470,12 +470,20 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id int err; I801_dev = dev; - if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) || - (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) || - (dev->device == PCI_DEVICE_ID_INTEL_ESB_4)) + switch (dev->device) { + case PCI_DEVICE_ID_INTEL_82801DB_3: + case PCI_DEVICE_ID_INTEL_82801EB_3: + case PCI_DEVICE_ID_INTEL_ESB_4: + case PCI_DEVICE_ID_INTEL_ICH6_16: + case PCI_DEVICE_ID_INTEL_ICH7_17: + case PCI_DEVICE_ID_INTEL_ESB2_17: + case PCI_DEVICE_ID_INTEL_ICH8_5: + case PCI_DEVICE_ID_INTEL_ICH9_6: isich4 = 1; - else + break; + default: isich4 = 0; + } err = pci_enable_device(dev); if (err) { -- cgit v1.2.3 From 3bacb36db01c7541ffea21d4ff39219e8b211a5c Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 10 Dec 2006 21:21:33 +0100 Subject: i2c: Fix return value check in i2c-dev device_create() returns error code as pointer on failures. This patch checks the return value of device_create() by using IS_ERR(). Signed-off-by: Akinobu Mita Cc: Greg Kroah-Hartman Signed-off-by: Jean Delvare --- drivers/i2c/i2c-dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index cf9381eae8da..909428af2b7e 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -416,8 +416,8 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, MKDEV(I2C_MAJOR, adap->nr), "i2c-%d", adap->nr); - if (!i2c_dev->dev) { - res = -ENODEV; + if (IS_ERR(i2c_dev->dev)) { + res = PTR_ERR(i2c_dev->dev); goto error; } res = device_create_file(i2c_dev->dev, &dev_attr_name); -- cgit v1.2.3 From 07125ab2c2641e976bbaf3b89a735ad5a99e25d3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:33 +0100 Subject: i2c: Refactor a kfree in i2c-dev Refactor kfree(i2c_dev) into return_i2c_dev(). This saves some code and makes more sense, as the memory is allocated in get_free_i2c_dev(). Signed-off-by: Jean Delvare Cc: Greg Kroah-Hartman --- drivers/i2c/i2c-dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 909428af2b7e..ac5bd2a7ca99 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -90,6 +90,7 @@ static void return_i2c_dev(struct i2c_dev *i2c_dev) spin_lock(&i2c_dev_list_lock); list_del(&i2c_dev->list); spin_unlock(&i2c_dev_list_lock); + kfree(i2c_dev); } static ssize_t show_adapter_name(struct device *dev, @@ -431,7 +432,6 @@ error_destroy: device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); error: return_i2c_dev(i2c_dev); - kfree(i2c_dev); return res; } @@ -446,7 +446,6 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) device_remove_file(i2c_dev->dev, &dev_attr_name); return_i2c_dev(i2c_dev); device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); - kfree(i2c_dev); pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); return 0; -- cgit v1.2.3 From d7aef138f3c08c5bbab567bc9a84e43a88f50395 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 10 Dec 2006 21:21:34 +0100 Subject: i2c: Fix OMAP clock prescaler to match the comment Signed-off-by: Jean Delvare Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index dec04da0455c..bcd8367cede1 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -231,8 +231,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) * 13 2 1 * 19.2 2 1 */ - if (fclk_rate > 16000000) - psc = (fclk_rate + 8000000) / 12000000; + if (fclk_rate > 12000000) + psc = fclk_rate / 12000000; } /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ -- cgit v1.2.3