From 449a7e99fd00c2c9416ef06e3f38e226a3ab1e8a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 26 Nov 2014 08:01:36 -0600 Subject: usb: musb: debugfs: cope with blackfin's oddities Blackfin's MUSB implementation lacks a bunch of registers which they end up not defining a macro for. In order to avoid build breaks, let's ifdef out some of the registers from our regdump debugfs utility so that we don't try to use those on Blackfin builds. Reported-by: Fengguang Wu Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_debugfs.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index ad3701a97389..54e8cde9ebd9 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -59,20 +59,12 @@ static const struct musb_register_map musb_regmap[] = { { "RxMaxPp", MUSB_RXMAXP, 16 }, { "RxCSR", MUSB_RXCSR, 16 }, { "RxCount", MUSB_RXCOUNT, 16 }, - { "ConfigData", MUSB_CONFIGDATA,8 }, { "IntrRxE", MUSB_INTRRXE, 16 }, { "IntrTxE", MUSB_INTRTXE, 16 }, { "IntrUsbE", MUSB_INTRUSBE, 8 }, { "DevCtl", MUSB_DEVCTL, 8 }, - { "BabbleCtl", MUSB_BABBLE_CTL,8 }, - { "TxFIFOsz", MUSB_TXFIFOSZ, 8 }, - { "RxFIFOsz", MUSB_RXFIFOSZ, 8 }, - { "TxFIFOadd", MUSB_TXFIFOADD, 16 }, - { "RxFIFOadd", MUSB_RXFIFOADD, 16 }, { "VControl", 0x68, 32 }, { "HWVers", 0x69, 16 }, - { "EPInfo", MUSB_EPINFO, 8 }, - { "RAMInfo", MUSB_RAMINFO, 8 }, { "LinkInfo", MUSB_LINKINFO, 8 }, { "VPLen", MUSB_VPLEN, 8 }, { "HS_EOF1", MUSB_HS_EOF1, 8 }, @@ -103,6 +95,16 @@ static const struct musb_register_map musb_regmap[] = { { "DMA_CNTLch7", 0x274, 16 }, { "DMA_ADDRch7", 0x278, 32 }, { "DMA_COUNTch7", 0x27C, 32 }, +#ifndef CONFIG_BLACKFIN + { "ConfigData", MUSB_CONFIGDATA,8 }, + { "BabbleCtl", MUSB_BABBLE_CTL,8 }, + { "TxFIFOsz", MUSB_TXFIFOSZ, 8 }, + { "RxFIFOsz", MUSB_RXFIFOSZ, 8 }, + { "TxFIFOadd", MUSB_TXFIFOADD, 16 }, + { "RxFIFOadd", MUSB_RXFIFOADD, 16 }, + { "EPInfo", MUSB_EPINFO, 8 }, + { "RAMInfo", MUSB_RAMINFO, 8 }, +#endif { } /* Terminating Entry */ }; -- cgit v1.2.3 From b1d347830d811f3648a52d28700896c6c404d609 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 26 Nov 2014 08:01:37 -0600 Subject: usb: musb: blackfin: fix build break commit cc92f681 (usb: musb: Populate new IO functions for blackfin) added a typo which prevented MUSB's blackfin glue layer from being built. Due to lack of tests and compilers for that architecture, the typo ended up being merged and causing a build regression. Fix that here Cc: Tony Lindgren Reported-by: Fengguang Wu Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index a441a2de8619..178250145613 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -63,7 +63,7 @@ static void bfin_writew(void __iomem *addr, unsigned offset, u16 data) bfin_write16(addr + offset, data); } -static void binf_writel(void __iomem *addr, unsigned offset, u32 data) +static void bfin_writel(void __iomem *addr, unsigned offset, u32 data) { bfin_write16(addr + offset, (u16)data); } -- cgit v1.2.3 From e87c3f80ad0490d26ffe04754b7d094463b40f30 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Thu, 27 Nov 2014 22:25:45 +0100 Subject: usb: musb: Fix a few off-by-one lengths !strncmp(buf, "force host", 9) is true if and only if buf starts with "force hos". This was obviously not what was intended. The same error exists for "force full-speed", "force high-speed" and "test packet". Using strstarts avoids the error-prone hardcoding of the prefix length. For consistency, also change the other occurences of the !strncmp idiom. Signed-off-by: Rasmus Villemoes Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_cppi41.c | 4 ++-- drivers/usb/musb/musb_debugfs.c | 16 ++++++++-------- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index f64fd964dc6d..c39a16ad7832 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -628,9 +628,9 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) ret = of_property_read_string_index(np, "dma-names", i, &str); if (ret) goto err; - if (!strncmp(str, "tx", 2)) + if (strstarts(str, "tx")) is_tx = 1; - else if (!strncmp(str, "rx", 2)) + else if (strstarts(str, "rx")) is_tx = 0; else { dev_err(dev, "Wrong dmatype %s\n", str); diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 54e8cde9ebd9..48131aa8472c 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -199,30 +199,30 @@ static ssize_t musb_test_mode_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - if (!strncmp(buf, "force host", 9)) + if (strstarts(buf, "force host")) test = MUSB_TEST_FORCE_HOST; - if (!strncmp(buf, "fifo access", 11)) + if (strstarts(buf, "fifo access")) test = MUSB_TEST_FIFO_ACCESS; - if (!strncmp(buf, "force full-speed", 15)) + if (strstarts(buf, "force full-speed")) test = MUSB_TEST_FORCE_FS; - if (!strncmp(buf, "force high-speed", 15)) + if (strstarts(buf, "force high-speed")) test = MUSB_TEST_FORCE_HS; - if (!strncmp(buf, "test packet", 10)) { + if (strstarts(buf, "test packet")) { test = MUSB_TEST_PACKET; musb_load_testpacket(musb); } - if (!strncmp(buf, "test K", 6)) + if (strstarts(buf, "test K")) test = MUSB_TEST_K; - if (!strncmp(buf, "test J", 6)) + if (strstarts(buf, "test J")) test = MUSB_TEST_J; - if (!strncmp(buf, "test SE0 NAK", 12)) + if (strstarts(buf, "test SE0 NAK")) test = MUSB_TEST_SE0_NAK; musb_writeb(musb->mregs, MUSB_TESTMODE, test); -- cgit v1.2.3 From 4fde6204df052bb89ba3d915ed6ed9f306f3cfa1 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 1 Dec 2014 16:09:27 +0800 Subject: usb: gadget: f_uac1: access freed memory at f_audio_free_inst At f_audio_free_inst, it tries to access struct gaudio *card which is freed at f_audio_free, it causes below oops if the audio device is not there (do unload module may trigger the same problem). The gaudio_cleanup is related to function, so it is better move to f_audio_free. root@freescale ~$ modprobe g_audio [ 751.968931] g_audio gadget: unable to open sound control device file: /dev/snd/controlC0 [ 751.977134] g_audio gadget: we need at least one control device [ 751.988633] Unable to handle kernel paging request at virtual address 455f448e [ 751.995963] pgd = bd42c000 [ 751.998681] [455f448e] *pgd=00000000 [ 752.002383] Internal error: Oops: 5 [#1] SMP ARM [ 752.007008] Modules linked in: usb_f_uac1 g_audio(+) usb_f_mass_storage libcomposite configfs [last unloaded: g_mass_storage] [ 752.018427] CPU: 0 PID: 692 Comm: modprobe Not tainted 3.18.0-rc4-00345-g842f57b #10 [ 752.026176] task: bdb3ba80 ti: bd41a000 task.ti: bd41a000 [ 752.031590] PC is at filp_close+0xc/0x84 [ 752.035530] LR is at gaudio_cleanup+0x28/0x54 [usb_f_uac1] [ 752.041023] pc : [<800ec94c>] lr : [<7f03c63c>] psr: 20000013 [ 752.041023] sp : bd41bcc8 ip : bd41bce8 fp : bd41bce4 [ 752.052504] r10: 7f036234 r9 : 7f036220 r8 : 7f036500 [ 752.057732] r7 : bd456480 r6 : 7f036500 r5 : 7f03626c r4 : bd441000 [ 752.064264] r3 : 7f03b3dc r2 : 7f03cab0 r1 : 00000000 r0 : 455f4456 [ 752.070798] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 752.077938] Control: 10c5387d Table: bd42c04a DAC: 00000015 [ 752.083688] Process modprobe (pid: 692, stack limit = 0xbd41a240) [ 752.089786] Stack: (0xbd41bcc8 to 0xbd41c000) [ 752.094152] bcc0: 7f03b3dc bd441000 7f03626c 7f036500 bd41bcfc bd41bce8 [ 752.102337] bce0: 7f03c63c 800ec94c 7f03b3dc bdaa6b00 bd41bd14 bd41bd00 7f03b3f4 7f03c620 [ 752.110521] bd00: 7f03b3dc 7f03cbd4 bd41bd2c bd41bd18 7f00f88c 7f03b3e8 00000000 fffffffe [ 752.118705] bd20: bd41bd5c bd41bd30 7f0380d8 7f00f874 7f038000 bd456480 7f036364 be392240 [ 752.126889] bd40: 00000000 7f00f620 7f00f638 bd41a008 bd41bd94 bd41bd60 7f00f6d4 7f03800c [ 752.135073] bd60: 00000001 00000000 8047438c be3a4000 7f036364 7f036364 7f00db28 7f00f620 [ 752.143257] bd80: 7f00f638 bd41a008 bd41bdb4 bd41bd98 804742ac 7f00f644 00000000 809adde0 [ 752.151442] bda0: 7f036364 7f036364 bd41bdcc bd41bdb8 804743c8 80474284 7f03633c 7f036200 [ 752.159626] bdc0: bd41bdf4 bd41bdd0 7f00d5b4 8047435c bd41a000 80974060 7f038158 00000000 [ 752.167811] bde0: 80974060 bdaa9940 bd41be04 bd41bdf8 7f03816c 7f00d518 bd41be8c bd41be08 [ 752.175995] be00: 80008a5c 7f038164 be001f00 7f0363c4 bd41bf48 00000000 bd41be54 bd41be28 [ 752.184179] be20: 800e9498 800e8e74 00000002 00000003 bd4129c0 c0a07000 00000001 7f0363c4 [ 752.192363] be40: bd41bf48 00000000 bd41be74 bd41be58 800de780 800e9320 bd41a000 7f0363d0 [ 752.200547] be60: 00000000 bd41a000 7f0363d0 00000000 bd41beec 7f0363c4 bd41bf48 00000000 [ 752.208731] be80: bd41bf44 bd41be90 80093e54 800089e0 ffff8000 00007fff 80091390 0000065f [ 752.216915] bea0: 00000000 c0a0834c bd41bf7c 00000086 bd41bf50 00000000 7f03651c 00000086 [ 752.225099] bec0: bd41a010 00c28758 800ddcc4 800ddae0 000000d2 bd412a00 bd41bf24 00000000 [ 752.233283] bee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 752.241467] bf00: 00000000 00000000 00000000 00000000 00000000 00000000 bd41bf44 000025b0 [ 752.249651] bf20: 00c28a08 00c28758 00000080 8000edc4 bd41a000 00000000 bd41bfa4 bd41bf48 [ 752.257835] bf40: 800943e4 800932ec c0a07000 000025b0 c0a07f8c c0a07ea4 c0a08e5c 0000051c [ 752.266019] bf60: 0000088c 00000000 00000000 00000000 00000018 00000019 00000010 0000000b [ 752.274203] bf80: 00000009 00000000 00000000 000025b0 00000000 00c28758 00000000 bd41bfa8 [ 752.282387] bfa0: 8000ec00 8009430c 000025b0 00000000 00c28a08 000025b0 00c28758 00c28980 [ 752.290571] bfc0: 000025b0 00000000 00c28758 00000080 000a6a78 00000007 00c28718 00c28980 [ 752.298756] bfe0: 7ebc1af0 7ebc1ae0 0001a32c 76e9c490 60000010 00c28a08 22013510 ecebffff [ 752.306933] Backtrace: [ 752.309414] [<800ec940>] (filp_close) from [<7f03c63c>] (gaudio_cleanup+0x28/0x54 [usb_f_uac1]) [ 752.318115] r6:7f036500 r5:7f03626c r4:bd441000 r3:7f03b3dc [ 752.323851] [<7f03c614>] (gaudio_cleanup [usb_f_uac1]) from [<7f03b3f4>] (f_audio_free_inst+0x18/0x68 [usb_f_uac1]) [ 752.334288] r4:bdaa6b00 r3:7f03b3dc [ 752.337931] [<7f03b3dc>] (f_audio_free_inst [usb_f_uac1]) from [<7f00f88c>] (usb_put_function_instance+0x24/0x30 [libcomposite]) [ 752.349498] r4:7f03cbd4 r3:7f03b3dc [ 752.353127] [<7f00f868>] (usb_put_function_instance [libcomposite]) from [<7f0380d8>] (audio_bind+0xd8/0xfc [g_audio]) [ 752.363824] r4:fffffffe r3:00000000 [ 752.367456] [<7f038000>] (audio_bind [g_audio]) from [<7f00f6d4>] (composite_bind+0x9c/0x1e8 [libcomposite]) [ 752.377284] r10:bd41a008 r9:7f00f638 r8:7f00f620 r7:00000000 r6:be392240 r5:7f036364 [ 752.385193] r4:bd456480 r3:7f038000 [ 752.388825] [<7f00f638>] (composite_bind [libcomposite]) from [<804742ac>] (udc_bind_to_driver+0x34/0xd8) [ 752.398394] r10:bd41a008 r9:7f00f638 r8:7f00f620 r7:7f00db28 r6:7f036364 r5:7f036364 [ 752.406302] r4:be3a4000 [ 752.408860] [<80474278>] (udc_bind_to_driver) from [<804743c8>] (usb_gadget_probe_driver+0x78/0xa8) [ 752.417908] r6:7f036364 r5:7f036364 r4:809adde0 r3:00000000 [ 752.423649] [<80474350>] (usb_gadget_probe_driver) from [<7f00d5b4>] (usb_composite_probe+0xa8/0xd4 [libcomposite]) [ 752.434086] r5:7f036200 r4:7f03633c [ 752.437713] [<7f00d50c>] (usb_composite_probe [libcomposite]) from [<7f03816c>] (audio_driver_init+0x14/0x1c [g_audio]) [ 752.448498] r9:bdaa9940 r8:80974060 r7:00000000 r6:7f038158 r5:80974060 r4:bd41a000 [ 752.456330] [<7f038158>] (audio_driver_init [g_audio]) from [<80008a5c>] (do_one_initcall+0x88/0x1d4) [ 752.465564] [<800089d4>] (do_one_initcall) from [<80093e54>] (load_module+0xb74/0x1020) [ 752.473571] r10:00000000 r9:bd41bf48 r8:7f0363c4 r7:bd41beec r6:00000000 r5:7f0363d0 [ 752.481478] r4:bd41a000 [ 752.484037] [<800932e0>] (load_module) from [<800943e4>] (SyS_init_module+0xe4/0xf8) [ 752.491781] r10:00000000 r9:bd41a000 r8:8000edc4 r7:00000080 r6:00c28758 r5:00c28a08 [ 752.499689] r4:000025b0 [ 752.502252] [<80094300>] (SyS_init_module) from [<8000ec00>] (ret_fast_syscall+0x0/0x48) [ 752.510345] r6:00c28758 r5:00000000 r4:000025b0 [ 752.515013] Code: 808475b4 e1a0c00d e92dd878 e24cb004 (e5904038) [ 752.521223] ---[ end trace 70babe34de4ab99b ]--- Segmentation fault Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_uac1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c index f7b203293205..e9715845f82e 100644 --- a/drivers/usb/gadget/function/f_uac1.c +++ b/drivers/usb/gadget/function/f_uac1.c @@ -897,7 +897,6 @@ static void f_audio_free_inst(struct usb_function_instance *f) struct f_uac1_opts *opts; opts = container_of(f, struct f_uac1_opts, func_inst); - gaudio_cleanup(opts->card); if (opts->fn_play_alloc) kfree(opts->fn_play); if (opts->fn_cap_alloc) @@ -935,6 +934,7 @@ static void f_audio_free(struct usb_function *f) struct f_audio *audio = func_to_audio(f); struct f_uac1_opts *opts; + gaudio_cleanup(&audio->card); opts = container_of(f->fi, struct f_uac1_opts, func_inst); kfree(audio); mutex_lock(&opts->lock); -- cgit v1.2.3 From c0442479652b99b62dd1ffccb34231caff25751c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 1 Dec 2014 11:10:15 -0800 Subject: usb: musb: Fix randconfig build issues for Kconfig options Commit 82c02f58ba3a ("usb: musb: Allow multiple glue layers to be built in") enabled selecting multiple glue layers, which in turn exposed things more for randconfig builds. If NOP_USB_XCEIV is built-in and TUSB6010 is a loadable module, we will get: drivers/built-in.o: In function `tusb_remove': tusb6010.c:(.text+0x16a817): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `tusb_probe': tusb6010.c:(.text+0x16b24e): undefined reference to `usb_phy_generic_register' make: *** [vmlinux] Error 1 Let's fix this the same way as commit 70c1ff4b3c86 ("usb: musb: tusb-dma can't be built-in if tusb is not"). And while at it, let's not allow selecting the glue layers except on platforms really using them unless COMPILE_TEST is specified: - TUSB6010 is in practise only used on omaps - DSPS is only used on TI platforms - UX500 is only used on STE platforms Cc: Linus Walleij Reported-by: Jim Davis Signed-off-by: Tony Lindgren Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 9d68372dd9aa..b005010240e5 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -72,6 +72,8 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" @@ -85,6 +87,7 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" select USB_MUSB_AM335X_CHILD + depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on OF_IRQ config USB_MUSB_BLACKFIN @@ -93,6 +96,7 @@ config USB_MUSB_BLACKFIN config USB_MUSB_UX500 tristate "Ux500 platforms" + depends on ARCH_U8500 || COMPILE_TEST config USB_MUSB_JZ4740 tristate "JZ4740" -- cgit v1.2.3 From c9b3bde03b95cf1cab068f773435cfee271baf0b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 7 Dec 2014 20:21:00 +0100 Subject: usb: gadget: fix misspelling of current function in string Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_hid.c | 5 +++-- drivers/usb/gadget/function/f_midi.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 6e04e302dc3a..a1bc3e3a0b09 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -399,8 +399,9 @@ static int hidg_setup(struct usb_function *f, value = __le16_to_cpu(ctrl->wValue); length = __le16_to_cpu(ctrl->wLength); - VDBG(cdev, "hid_setup crtl_request : bRequestType:0x%x bRequest:0x%x " - "Value:0x%x\n", ctrl->bRequestType, ctrl->bRequest, value); + VDBG(cdev, + "%s crtl_request : bRequestType:0x%x bRequest:0x%x Value:0x%x\n", + __func__, ctrl->bRequestType, ctrl->bRequest, value); switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8 diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index a90440300735..259b656c0b3e 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -520,7 +520,7 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req) req = midi_alloc_ep_req(ep, midi->buflen); if (!req) { - ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n"); + ERROR(midi, "%s: alloc_ep_request failed\n", __func__); return; } req->length = 0; -- cgit v1.2.3 From 62f4f0651ce8ef966a0e5b6db6a7a524c268fdd2 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Tue, 9 Dec 2014 14:41:45 +0100 Subject: usb: dwc2: gadget: kill requests with 'force' in s3c_hsotg_udc_stop() This makes us sure that all requests are completed before we unbind gadget. There are assumptions in gadget API that all requests have to be completed and leak of complete can break some usb function drivers. For example unbind of ECM function can cause NULL pointer dereference: [ 26.396595] configfs-gadget gadget: unbind function 'cdc_ethernet'/e79c4c00 [ 26.414999] Unable to handle kernel NULL pointer dereference at virtual address 00000000 (...) [ 26.452223] PC is at ecm_unbind+0x6c/0x9c [ 26.456209] LR is at ecm_unbind+0x68/0x9c (...) [ 26.603696] [] (ecm_unbind) from [] (purge_configs_funcs+0x94/0xd8) [ 26.611674] [] (purge_configs_funcs) from [] (configfs_composite_unbind+0x14/0x34) [ 26.620961] [] (configfs_composite_unbind) from [] (usb_gadget_remove_driver+0x68/0x9c) [ 26.630683] [] (usb_gadget_remove_driver) from [] (usb_gadget_unregister_driver+0x64/0x94) [ 26.640664] [] (usb_gadget_unregister_driver) from [] (unregister_gadget+0x20/0x3c) [ 26.650038] [] (unregister_gadget) from [] (gadget_dev_desc_UDC_store+0x80/0xb8) [ 26.659152] [] (gadget_dev_desc_UDC_store) from [] (gadget_info_attr_store+0x1c/0x28) [ 26.668703] [] (gadget_info_attr_store) from [] (configfs_write_file+0xe8/0x148) [ 26.677818] [] (configfs_write_file) from [] (vfs_write+0xb0/0x1a0) [ 26.685801] [] (vfs_write) from [] (SyS_write+0x44/0x84) [ 26.692834] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x30) [ 26.700381] Code: e30409f8 e34c0069 eb07b88d e59430a8 (e5930000) [ 26.706485] ---[ end trace f62a082b323838a2 ]--- It's because in some cases request is still running on endpoint during unbind and kill_all_requests() called from s3c_hsotg_udc_stop() function doesn't cause call of complete() of request. Missing complete() call causes ecm->notify_req equals NULL in ecm_unbind() function, and this is reason of this bug. Similar breaks can be observed in another usb function drivers. This patch fixes this bug forcing usb request completion in when s3c_hsotg_ep_disable() is called from s3c_hsotg_udc_stop(). Acked-by: Paul Zimmerman Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 200168ec2d75..79242008085b 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2567,7 +2567,7 @@ error: * s3c_hsotg_ep_disable - disable given endpoint * @ep: The endpoint to disable. */ -static int s3c_hsotg_ep_disable(struct usb_ep *ep) +static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); struct dwc2_hsotg *hsotg = hs_ep->parent; @@ -2588,7 +2588,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) spin_lock_irqsave(&hsotg->lock, flags); /* terminate all requests with shutdown */ - kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false); + kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, force); hsotg->fifo_map &= ~(1<fifo_index); hs_ep->fifo_index = 0; @@ -2609,6 +2609,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) return 0; } +static int s3c_hsotg_ep_disable(struct usb_ep *ep) +{ + return s3c_hsotg_ep_disable_force(ep, false); +} /** * on_list - check request is on the given endpoint * @ep: The endpoint to check. @@ -2924,7 +2928,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget) /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) - s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); + s3c_hsotg_ep_disable_force(&hsotg->eps[ep].ep, true); spin_lock_irqsave(&hsotg->lock, flags); -- cgit v1.2.3 From 68693b8ea4e284c46bff919ac62bd9ccdfdbb6ba Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 11 Dec 2014 18:14:18 +0100 Subject: usb: musb: stuff leak of struct usb_hcd since the split of host+gadget mode in commit 74c2e9360058 ("usb: musb: factor out hcd initalization") we leak the usb_hcd struct. We call now musb_host_cleanup() which does basically usb_remove_hcd() and also sets the hcd variable to NULL. Doing so makes the finall call to musb_host_free() basically a nop and the usb_hcd remains around for ever without anowner. This patch drops that NULL assignment for that reason. Fixes: 74c2e9360058 ("usb: musb: factor out hcd initalization") Cc: # v3.11+ Cc: Daniel Mack Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_host.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 23d474d3d7f4..883a9adfdfff 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2663,7 +2663,6 @@ void musb_host_cleanup(struct musb *musb) if (musb->port_mode == MUSB_PORT_MODE_GADGET) return; usb_remove_hcd(musb->hcd); - musb->hcd = NULL; } void musb_host_free(struct musb *musb) -- cgit v1.2.3 From b44be2462dbe3e23f0aedff64de52a1e8e47a1cd Mon Sep 17 00:00:00 2001 From: Mario Schuknecht Date: Tue, 16 Dec 2014 08:58:57 +0100 Subject: usb: gadget: gadgetfs: Free memory allocated by memdup_user() Commit 3b74c73f8d6f053f422e85fce955b61fb181cfe7 switched over to memdup_user() in ep_write() function and removed kfree (kbuf). memdup_user() function allocates memory which is never freed. Fixes: 3b74c73 (usb: gadget: inode: switch over to memdup_user()) Cc: # v3.15+ Signed-off-by: Mario Schuknecht Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index c744e4975d74..08048613eed6 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -449,6 +449,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) data->name, len, (int) value); free1: mutex_unlock(&data->lock); + kfree (kbuf); return value; } -- cgit v1.2.3 From 84a2b61b6eb94036093531cdabc448dddfbae45a Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 18 Dec 2014 16:39:14 +0200 Subject: usb: dwc3: pci: add support for Intel Sunrise Point PCH Add PCI IDs for Intel Sunrise Point PCH. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 7c4faf738747..b642a2f998f9 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -33,6 +33,8 @@ #define PCI_DEVICE_ID_INTEL_BYT 0x0f37 #define PCI_DEVICE_ID_INTEL_MRFLD 0x119e #define PCI_DEVICE_ID_INTEL_BSW 0x22B7 +#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 +#define PCI_DEVICE_ID_INTEL_SPTH 0xa130 struct dwc3_pci { struct device *dev; @@ -219,6 +221,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.3 From f40afdddeb6c54ffd1e2920a5e93e363d6748db6 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 17 Dec 2014 17:18:48 +0800 Subject: usb: gadget: udc: atmel: change setting for DMA According to the datasheet, when transfer using DMA, the control setting for IN packet only need END_BUF_EN, END_BUF_IE, CH_EN, while for OUT packet, need more two bits END_TR_EN and END_TR_IE to be configured. Fixes: 914a3f3b3754 (USB: add atmel_usba_udc driver) Cc: # 2.6.24+ Acked-by: Nicolas Ferre Signed-off-by: Bo Shen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index ce882371786b..63e90f5c05cb 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -716,10 +716,10 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, req->using_dma = 1; req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length) | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE - | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; + | USBA_DMA_END_BUF_EN; - if (ep->is_in) - req->ctrl |= USBA_DMA_END_BUF_EN; + if (!ep->is_in) + req->ctrl |= USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; /* * Add this request to the queue and submit for DMA if -- cgit v1.2.3 From 6785a1034461c2d2c205215f63a50a740896e55b Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 17 Dec 2014 17:18:49 +0800 Subject: usb: gadget: udc: atmel: fix possible IN hang issue When receive data, the RXRDY in status register set by hardware after a new packet has been stored in the endpoint FIFO. When it is copied from FIFO, this bit is cleared which make the FIFO can be accessed again. In the receive_data() function, this bit RXRDY has been cleared. So, after the receive_data() function return, this bit should not be cleared again, or else it may cause the accessing FIFO corrupt, which will make the data loss. Fixes: 914a3f3b3754 (USB: add atmel_usba_udc driver) Cc: # 2.6.24+ Acked-by: Nicolas Ferre Signed-off-by: Bo Shen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 63e90f5c05cb..93328ea7eb1b 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1563,7 +1563,6 @@ static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep) if ((epstatus & epctrl) & USBA_RX_BK_RDY) { DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); receive_data(ep); - usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); } } -- cgit v1.2.3 From 4e038e8919e072c9fa1b5462a7c89d8c95ac8657 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 17 Dec 2014 02:55:23 +0300 Subject: phy: miphy28lp: unlock on error in miphy28lp_init() We need to unlock before returning the -EINVAL here. Signed-off-by: Dan Carpenter Acked-by: Gabriel Fernandez Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-miphy28lp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index e34da13885e8..27fa62ce6136 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -1050,7 +1050,8 @@ static int miphy28lp_init(struct phy *phy) ret = miphy28lp_init_usb3(miphy_phy); break; default: - return -EINVAL; + ret = -EINVAL; + break; } mutex_unlock(&miphy_dev->miphy_mutex); -- cgit v1.2.3 From 372400344afb60e275a271f3f5ccce17af0e45cb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 17 Dec 2014 15:39:37 +0100 Subject: phy-sun4i-usb: Change disconnect threshold value for sun6i The allwinner SDK uses a value of 3 for the disconnect threshold setting on sun6i, do the same in the kernel. In my previous experience with sun5i problems getting the threshold right is important to avoid usb2 devices being unplugged sometimes going unnoticed. Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index fb02a67c9181..a2b08f3ccb03 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -244,7 +244,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) else data->num_phys = 3; - if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy")) + if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy") || + of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) data->disc_thresh = 3; else data->disc_thresh = 2; -- cgit v1.2.3 From 0bc09f9cdc589e0b54724096138996a00b19babb Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Tue, 16 Dec 2014 14:52:50 +0530 Subject: phy: phy-ti-pipe3: fix inconsistent enumeration of PCIe gen2 cards Prior to DRA74x silicon rev 1.1, pcie_pcs register bits 8-15 and bits 16-23 were used to configure RC delay count for phy1 and phy2 respectively. phyid was used as index to distinguish the phys and to configure the delay values appropriately. As of DRA74x silicon rev 1.1, pcie_pcs register definition has changed. Bits 16-23 are used to configure delay values for *both* phy1 and phy2. Hence phyid is no longer required. So, drop id field from ti_pipe3 structure and its subsequent references for configuring pcie_pcs register. Also, pcie_pcs register now needs to be configured with delay value of 0x96 at bit positions 16-23. See register description of CTRL_CORE_PCIE_PCS in ARM572x TRM, SPRUHZ6, October 2014, section 18.5.2.2, table 18-1804. This is needed to ensure Gen2 cards are enumerated consistently. DRA72x silicon behaves same way as DRA74x rev 1.1 as far as this functionality is considered. Test results on DRA74x and DRA72x EVMs: Before patch ------------ DRA74x ES 1.0: Gen1 cards work, Gen2 cards do not work (expected result due to silicon errata) DRA74x ES 1.1: Gen1 cards work, Gen2 cards do not work sometimes due to incorrect programming of register DRA72x: Gen1 cards work, Gen2 cards do not work sometimes due to incorrect programming of register After patch ----------- DRA74x ES 1.0: Gen1 cards work, Gen2 cards do not work (expected result due to silicon errata) DRA74x ES 1.1: Gen1 cards work, Gen2 cards work consistently. DRA72x: Gen1 and Gen2 cards enumerate consistently. Signed-off-by: Vignesh R Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-omap-control.c | 7 +++---- drivers/phy/phy-ti-pipe3.c | 10 ++++++---- include/linux/phy/omap_control_phy.h | 6 +++--- 3 files changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c index c96e8183a8ff..efe724f97e02 100644 --- a/drivers/phy/phy-omap-control.c +++ b/drivers/phy/phy-omap-control.c @@ -29,10 +29,9 @@ /** * omap_control_pcie_pcs - set the PCS delay count * @dev: the control module device - * @id: index of the pcie PHY (should be 1 or 2) * @delay: 8 bit delay value */ -void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay) +void omap_control_pcie_pcs(struct device *dev, u8 delay) { u32 val; struct omap_control_phy *control_phy; @@ -55,8 +54,8 @@ void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay) val = readl(control_phy->pcie_pcs); val &= ~(OMAP_CTRL_PCIE_PCS_MASK << - (id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT)); - val |= delay << (id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT); + OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT); + val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT); writel(val, control_phy->pcie_pcs); } EXPORT_SYMBOL_GPL(omap_control_pcie_pcs); diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 1387b4d4afe3..465de2c800f2 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -82,7 +82,6 @@ struct ti_pipe3 { struct clk *refclk; struct clk *div_clk; struct pipe3_dpll_map *dpll_map; - u8 id; }; static struct pipe3_dpll_map dpll_map_usb[] = { @@ -217,8 +216,13 @@ static int ti_pipe3_init(struct phy *x) u32 val; int ret = 0; + /* + * Set pcie_pcs register to 0x96 for proper functioning of phy + * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table + * 18-1804. + */ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { - omap_control_pcie_pcs(phy->control_dev, phy->id, 0xF1); + omap_control_pcie_pcs(phy->control_dev, 0x96); return 0; } @@ -347,8 +351,6 @@ static int ti_pipe3_probe(struct platform_device *pdev) } if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { - if (of_property_read_u8(node, "id", &phy->id) < 0) - phy->id = 1; clk = devm_clk_get(phy->dev, "dpll_ref"); if (IS_ERR(clk)) { diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h index e9e6cfbfbb58..eb7d4a135a9e 100644 --- a/include/linux/phy/omap_control_phy.h +++ b/include/linux/phy/omap_control_phy.h @@ -66,7 +66,7 @@ enum omap_control_usb_mode { #define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 #define OMAP_CTRL_PCIE_PCS_MASK 0xff -#define OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT 0x8 +#define OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT 16 #define OMAP_CTRL_USB2_PHY_PD BIT(28) @@ -79,7 +79,7 @@ enum omap_control_usb_mode { void omap_control_phy_power(struct device *dev, int on); void omap_control_usb_set_mode(struct device *dev, enum omap_control_usb_mode mode); -void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay); +void omap_control_pcie_pcs(struct device *dev, u8 delay); #else static inline void omap_control_phy_power(struct device *dev, int on) @@ -91,7 +91,7 @@ static inline void omap_control_usb_set_mode(struct device *dev, { } -static inline void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay) +static inline void omap_control_pcie_pcs(struct device *dev, u8 delay) { } #endif -- cgit v1.2.3 From c818a94c77a9980709197c53368aa83451fd659f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 4 Dec 2014 13:06:07 +0100 Subject: usb: phy: Restore deferred probing path Commit 1290a958d48e ("usb: phy: propagate __of_usb_find_phy()'s error on failure") broke platforms that rely on deferred probing to order probing of PHY and host controller drivers. The reason is that the commit simply propagates errors from __of_usb_find_phy(), which returns -ENODEV if no PHY has been registered yet for a given device tree node. The only case in which -EPROBE_DEFER would now be returned is if try_module_get() did fail, which does not make sense. The correct thing to do is to return -EPROBE_DEFER if a PHY hasn't been registered yet. The only condition under which it makes sense to return -ENODEV is if the device tree node representing the PHY has been disabled (via the status property) because in that case the PHY will never be registered. This patch addresses the problem by making __of_usb_find_phy() return an appropriate error code while keeping in line with the above-mentioned commit to propagate error codes rather than overwriting them. At the same time the check for a valid PHY is decoupled from the check for the try_module_get() call and a separate error code is returned if the latter fails. Fixes: 1290a95 (usb: phy: propagate __of_usb_find_phy()'s error on failure) Signed-off-by: Thierry Reding Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index b4066a001ba0..2f9735b35338 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -59,6 +59,9 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node) { struct usb_phy *phy; + if (!of_device_is_available(node)) + return ERR_PTR(-ENODEV); + list_for_each_entry(phy, &phy_list, head) { if (node != phy->dev->of_node) continue; @@ -66,7 +69,7 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node) return phy; } - return ERR_PTR(-ENODEV); + return ERR_PTR(-EPROBE_DEFER); } static void devm_usb_phy_release(struct device *dev, void *res) @@ -190,10 +193,13 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, spin_lock_irqsave(&phy_lock, flags); phy = __of_usb_find_phy(node); - if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { - if (!IS_ERR(phy)) - phy = ERR_PTR(-EPROBE_DEFER); + if (IS_ERR(phy)) { + devres_free(ptr); + goto err1; + } + if (!try_module_get(phy->dev->driver->owner)) { + phy = ERR_PTR(-ENODEV); devres_free(ptr); goto err1; } -- cgit v1.2.3 From 90441b4dbe90ba0c38111ea89fa093a8c9627801 Mon Sep 17 00:00:00 2001 From: Preston Fick Date: Sat, 27 Dec 2014 01:32:41 -0600 Subject: USB: cp210x: fix ID for production CEL MeshConnect USB Stick Fixing typo for MeshConnect IDs. The original PID (0x8875) is not in production and is not needed. Instead it has been changed to the official production PID (0x8857). Signed-off-by: Preston Fick Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 6c4eb3cf5efd..fb8d3fa8b5fe 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ - { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */ + { USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ -- cgit v1.2.3 From b5122236bba8d7ef62153da5b55cc65d0944c61e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Dec 2014 18:39:39 +0100 Subject: USB: keyspan: fix null-deref at probe Fix null-pointer dereference during probe if the interface-status completion handler is called before the individual ports have been set up. Fixes: f79b2d0fe81e ("USB: keyspan: fix NULL-pointer dereferences and memory leaks") Reported-by: Richard Tested-by: Richard Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 077c714f1285..e07b15ed5814 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -410,6 +410,8 @@ static void usa26_instat_callback(struct urb *urb) } port = serial->port[msg->port]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; @@ -420,7 +422,7 @@ static void usa26_instat_callback(struct urb *urb) if (old_dcd_state != p_priv->dcd_state) tty_port_tty_hangup(&port->port, true); - +resubmit: /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) @@ -527,6 +529,8 @@ static void usa28_instat_callback(struct urb *urb) } port = serial->port[msg->port]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; @@ -537,7 +541,7 @@ static void usa28_instat_callback(struct urb *urb) if (old_dcd_state != p_priv->dcd_state && old_dcd_state) tty_port_tty_hangup(&port->port, true); - +resubmit: /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) @@ -607,6 +611,8 @@ static void usa49_instat_callback(struct urb *urb) } port = serial->port[msg->portNumber]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; @@ -617,7 +623,7 @@ static void usa49_instat_callback(struct urb *urb) if (old_dcd_state != p_priv->dcd_state && old_dcd_state) tty_port_tty_hangup(&port->port, true); - +resubmit: /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) @@ -855,6 +861,8 @@ static void usa90_instat_callback(struct urb *urb) port = serial->port[0]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; @@ -865,7 +873,7 @@ static void usa90_instat_callback(struct urb *urb) if (old_dcd_state != p_priv->dcd_state && old_dcd_state) tty_port_tty_hangup(&port->port, true); - +resubmit: /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) @@ -926,6 +934,8 @@ static void usa67_instat_callback(struct urb *urb) port = serial->port[msg->port]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; @@ -934,7 +944,7 @@ static void usa67_instat_callback(struct urb *urb) if (old_dcd_state != p_priv->dcd_state && old_dcd_state) tty_port_tty_hangup(&port->port, true); - +resubmit: /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) -- cgit v1.2.3 From 1ae78a4870989a354028cb17dabf819b595e70e3 Mon Sep 17 00:00:00 2001 From: David Peterson Date: Tue, 6 Jan 2015 15:00:52 +0000 Subject: USB: cp210x: add IDs for CEL USB sticks and MeshWorks devices Added virtual com port VID/PID entries for CEL USB sticks and MeshWorks devices. Signed-off-by: David Peterson Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fb8d3fa8b5fe..f4c56fc1a9f6 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -120,10 +120,12 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ - { USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */ + { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */ + { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ + { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ -- cgit v1.2.3 From d80c0d14183516f184a5ac88e11008ee4c7d2a2e Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Tue, 6 Jan 2015 22:06:38 +0100 Subject: USB: qcserial/option: make AT URCs work for Sierra Wireless MC73xx As has been discussed in the thread starting with https://lkml.kernel.org/g/549748e9.d+SiJzqu50f1r4lSAL043YSc@arcor.de Sierra Wireless MC73xx devices with USB VID/PID 0x1199:0x68c0 require the option_send_setup() code to be used on the USB interface for the AT port to make unsolicited response codes work correctly. Move these devices from the qcserial driver where they have been added by commit 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 ("usb: qcserial: add Sierra Wireless MC73xx") to the option driver and add a MC73xx-specific blacklist to ensure that 1. the sendsetup code is not used for the DIAG/DM and NMEA interfaces 2. the option driver does not attach to the QMI/network interfaces Signed-off-by: Reinhard Speyerer Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 11 ++++++++++- drivers/usb/serial/qcserial.c | 1 - 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7a4c21b4f676..efdcee15b520 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -234,6 +234,8 @@ static void option_instat_callback(struct urb *urb); #define QUALCOMM_VENDOR_ID 0x05C6 +#define SIERRA_VENDOR_ID 0x1199 + #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 #define CMOTECH_PRODUCT_CMU_300 0x6002 @@ -512,7 +514,7 @@ enum option_blacklist_reason { OPTION_BLACKLIST_RESERVED_IF = 2 }; -#define MAX_BL_NUM 8 +#define MAX_BL_NUM 11 struct option_blacklist_info { /* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */ const unsigned long sendsetup; @@ -601,6 +603,11 @@ static const struct option_blacklist_info telit_le920_blacklist = { .reserved = BIT(1) | BIT(5), }; +static const struct option_blacklist_info sierra_mc73xx_blacklist = { + .sendsetup = BIT(0) | BIT(2), + .reserved = BIT(8) | BIT(10) | BIT(11), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1098,6 +1105,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ + { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff), + .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index cb3e14780a7e..9c63897b3a56 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -142,7 +142,6 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x0f3d, 0x68a2)}, /* Sierra Wireless MC7700 */ {DEVICE_SWI(0x114f, 0x68a2)}, /* Sierra Wireless MC7750 */ {DEVICE_SWI(0x1199, 0x68a2)}, /* Sierra Wireless MC7710 */ - {DEVICE_SWI(0x1199, 0x68c0)}, /* Sierra Wireless MC73xx */ {DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */ {DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */ {DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */ -- cgit v1.2.3 From 24c498df1c70fa3b8b4df18f4424904bf014c709 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 24 Dec 2014 11:33:17 +0800 Subject: Revert "usb: chipidea: remove duplicate dev_set_drvdata for host_start" This reverts commit 14b4099c074f2ddf4d84b22d370170e61b527529 It moved platform_set_drvdata(pdev, ci) before hcd is created, and the hcd will assign itself as ci controller's drvdata during the hcd creation function (in usb_create_shared_hcd), so it overwrites the real ci's drvdata which we want to use. So, if the controller is at host mode, the system suspend API will get the wrong struct ci_hdrc pointer, and cause the oops. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 2 +- drivers/usb/chipidea/host.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 5b9825a4538a..a57dc8866fc5 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -669,7 +669,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (!ci) return -ENOMEM; - platform_set_drvdata(pdev, ci); ci->dev = dev; ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & @@ -783,6 +782,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) } } + platform_set_drvdata(pdev, ci); ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, ci); if (ret) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index c1694cff1eaf..48731d0bab35 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -91,6 +91,7 @@ static int host_start(struct ci_hdrc *ci) if (!hcd) return -ENOMEM; + dev_set_drvdata(ci->dev, ci); hcd->rsrc_start = ci->hw_bank.phys; hcd->rsrc_len = ci->hw_bank.size; hcd->regs = ci->hw_bank.abs; -- cgit v1.2.3 From f161ead70fa6a62e432dff6e9dab8e3cfbeabea6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 9 Jan 2015 17:18:28 +0200 Subject: xhci: Check if slot is already in default state before moving it there Solves xhci error cases with debug messages: xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. usb 1-6: hub failed to enable device, error -22 xhci will give a context state error if we try to set a slot in default state to the same default state with a special address device command. Turns out this happends in several cases: - retry reading the device rescriptor in hub_port_init() - usb_reset_device() is called for a slot in default state - in resume path, usb_port_resume() calls hub_port_init() The default state is usually reached from most states with a reset device command without any context state errors, but using the address device command with BSA bit set (block set address) only works from the enabled state and will otherwise cause context error. solve this by checking if we are already in the default state before issuing a address device BSA=1 command. Fixes: 48fc7dbd52c0 ("usb: xhci: change enumeration scheme to 'new scheme'") Cc: # v3.14+ Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 01fcbb5eb06e..c50d8d202618 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3803,6 +3803,15 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, return -EINVAL; } + if (setup == SETUP_CONTEXT_ONLY) { + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == + SLOT_STATE_DEFAULT) { + xhci_dbg(xhci, "Slot already in default state\n"); + return 0; + } + } + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); if (!command) return -ENOMEM; -- cgit v1.2.3 From 6d89252a998a695ecb0348fc2d717dc33d90cae9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 4 Dec 2014 10:21:56 -0500 Subject: USB: EHCI: fix initialization bug in iso_stream_schedule() Commit c3ee9b76aa93 (EHCI: improved logic for isochronous scheduling) introduced the idea of using ehci->last_iso_frame as the origin (or base) for the circular calculations involved in modifying the isochronous schedule. However, the new code it added used ehci->last_iso_frame before the value was properly initialized. This patch rectifies the mistake by moving the initialization lines earlier in iso_stream_schedule(). This fixes Bugzilla #72891. Signed-off-by: Alan Stern Fixes: c3ee9b76aa93 Reported-by: Joe Bryant Tested-by: Joe Bryant Tested-by: Martin Long CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index e113fd73aeae..c399606f154e 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1581,6 +1581,10 @@ iso_stream_schedule ( else next = (now + 2 + 7) & ~0x07; /* full frame cache */ + /* If needed, initialize last_iso_frame so that this URB will be seen */ + if (ehci->isoc_count == 0) + ehci->last_iso_frame = now >> 3; + /* * Use ehci->last_iso_frame as the base. There can't be any * TDs scheduled for earlier than that. @@ -1671,10 +1675,6 @@ iso_stream_schedule ( urb->start_frame = start & (mod - 1); if (!stream->highspeed) urb->start_frame >>= 3; - - /* Make sure scan_isoc() sees these */ - if (ehci->isoc_count == 0) - ehci->last_iso_frame = now >> 3; return status; fail: -- cgit v1.2.3 From c401e7b4a808d50ab53ef45cb8d0b99b238bf2c9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 4 Dec 2014 10:22:57 -0500 Subject: USB: EHCI: adjust error return code The USB stack uses error code -ENOSPC to indicate that the periodic schedule is too full, with insufficient bandwidth to accommodate a new allocation. It uses -EFBIG to indicate that an isochronous transfer could not be linked into the schedule because it would exceed the number of isochronous packets the host controller driver can handle (generally because the new transfer would extend too far into the future). ehci-hcd uses the wrong error code at one point. This patch fixes it, along with a misleading comment and debugging message. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index c399606f154e..f9a332775c47 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1604,11 +1604,11 @@ iso_stream_schedule ( */ now2 = (now - base) & (mod - 1); - /* Is the schedule already full? */ + /* Is the schedule about to wrap around? */ if (unlikely(!empty && start < period)) { - ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n", + ehci_dbg(ehci, "request %p would overflow (%u-%u < %u mod %u)\n", urb, stream->next_uframe, base, period, mod); - status = -ENOSPC; + status = -EFBIG; goto fail; } -- cgit v1.2.3 From 7f5c4d631aed243ca89c6673427954210b1628ec Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 5 Dec 2014 11:11:28 +0100 Subject: xhci: Add broken-streams quirk for Fresco Logic FL1000G xhci controllers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Streams do not work reliabe on Fresco Logic FL1000G xhci controllers, trying to use them results in errors like this: 21:37:33 kernel: xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring 21:37:33 kernel: xhci_hcd 0000:04:00.0: @00000000368b3570 9067b000 00000000 05000000 01078001 21:37:33 kernel: xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring 21:37:33 kernel: xhci_hcd 0000:04:00.0: @00000000368b3580 9067b400 00000000 05000000 01038001 As always I've ordered a pci-e addon card with a Fresco Logic controller for myself to see if I can come up with a better fix then the big hammer, in the mean time this will make uas devices work again (in usb-storage mode) for FL1000G users. Reported-by: Marcin Zajączkowski Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 142b601f9563..7f76c8a12f89 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -82,6 +82,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) "must be suspended extra slowly", pdev->revision); } + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) + xhci->quirks |= XHCI_BROKEN_STREAMS; /* Fresco Logic confirms: all revisions of this chip do not * support MSI, even though some of them claim to in their PCI * capabilities. -- cgit v1.2.3 From e5797a3d079f3e5049140055d850691b5cc7d10a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 5 Dec 2014 11:11:29 +0100 Subject: uas: Add US_FL_NO_ATA_1X for Seagate devices with usb-id 0bc2:a013 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is yet another Seagate device which needs the US_FL_NO_ATA_1X quirk Reported-by: Marcin Zajączkowski Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 18a283d6de1c..2918376a1979 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -68,6 +68,13 @@ UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Marcin Zajączkowski */ +UNUSUAL_DEV(0x0bc2, 0xa013, 0x0000, 0x9999, + "Seagate", + "Backup Plus", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* https://bbs.archlinux.org/viewtopic.php?id=183190 */ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, "Seagate", -- cgit v1.2.3 From c6fa3945c8b5baf62f2e849104ecd6f3a1e5e407 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 8 Dec 2014 09:50:47 +0100 Subject: uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS566 with usb-id 0bc2:a013 Like the JMicron JMS567 enclosures with the JMS566 choke on report-opcodes, so avoid it. Tested-and-reported-by: Takeo Nakayama Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2918376a1979..2f0a3d35269a 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -111,6 +111,13 @@ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Takeo Nakayama */ +UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999, + "JMicron", + "JMS566", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* Reported-by: Hans de Goede */ UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999, "Hitachi", -- cgit v1.2.3 From 36d1ffdb210ec2d0d6a69e9f6466ae8727d34119 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 11 Dec 2014 11:01:11 -0800 Subject: uas: disable UAS on Apricorn SATA dongles The Apricorn SATA dongle will occasionally return "USBSUSBSUSB" in response to SCSI commands when running in UAS mode. Therefore, disable UAS mode on this dongle. Signed-off-by: Darrick J. Wong Acked-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2f0a3d35269a..b5e3255d08f7 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -40,6 +40,16 @@ * and don't forget to CC: the USB development list */ +/* + * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI + * commands in UAS mode. Observed with the 1.28 firmware; are there others? + */ +UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128, + "Apricorn", + "", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ UNUSUAL_DEV(0x0bc2, 0x2312, 0x0000, 0x9999, "Seagate", -- cgit v1.2.3 From f56e67f0a880a5b795cdb5f62614aafe264c5304 Mon Sep 17 00:00:00 2001 From: Vince Hsu Date: Wed, 24 Dec 2014 18:16:30 +0800 Subject: usb: host: ehci-tegra: request deferred probe when failing to get phy The commit 1290a958d48e ("usb: phy: propagate __of_usb_find_phy()'s error on failure") changed the condition to return -EPROBE_DEFER to host driver. Originally the Tegra host driver depended on the returned -EPROBE_DEFER to get the phy device later when booting. Now we have to do that explicitly. Signed-off-by: Vince Hsu Tested-by: Tomeu Vizoso Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 19a9af1b4d74..ff9af29b4e9f 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -451,7 +451,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); if (IS_ERR(u_phy)) { - err = PTR_ERR(u_phy); + err = -EPROBE_DEFER; goto cleanup_clk_en; } hcd->usb_phy = u_phy; -- cgit v1.2.3 From f26d29e34e203296140334087fa3c81168626d76 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 6 Jan 2015 14:49:47 -0500 Subject: usb: gadget: udc: avoid dereference before NULL check in ep_queue Coverity: CID 1260069 Signed-off-by: John W. Linville Cc: Felipe Balbi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/bdc/bdc_ep.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c index ff67ceac77c4..d4fe8d769bd6 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_ep.c +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -718,10 +718,11 @@ static int ep_queue(struct bdc_ep *ep, struct bdc_req *req) struct bdc *bdc; int ret = 0; - bdc = ep->bdc; if (!req || !ep || !ep->usb_ep.desc) return -EINVAL; + bdc = ep->bdc; + req->usb_req.actual = 0; req->usb_req.status = -EINPROGRESS; req->epnum = ep->ep_num; -- cgit v1.2.3 From 078fd7d6308a30121b80c297e9b38a2e53711942 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 8 Jan 2015 15:15:14 +0100 Subject: uas: Do not blacklist ASM1153 disk enclosures Our detection logic to avoid doing UAS on ASM1051 bridge chips causes problems with newer ASM1153 disk enclosures in 2 ways: 1) Some ASM1153 disk enclosures re-use the ASM1051 device-id of 5106, which we assume is always an ASM1051, so remove the quirk for 5106, and instead use the same detection logic as we already use for device-id 55aa, which is used for all of ASM1051, ASM1053 and ASM1153 devices . 2) Our detection logic to differentiate between ASM1051 and ASM1053 sees ASM1153 devices as ASM1051 because they have 32 streams like ASM1051 devs. Luckily the ASM1153 descriptors are not 100% identical, unlike the previous models the ASM1153 has bMaxPower == 0, so use that to differentiate it. Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/uas-detect.h | 33 ++++++++++++++++++++++++++++----- drivers/usb/storage/unusual_uas.h | 8 -------- 2 files changed, 28 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h index 8a6f371ed6e7..9893d696fc97 100644 --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -69,16 +69,39 @@ static int uas_use_uas_driver(struct usb_interface *intf, return 0; /* - * ASM1051 and older ASM1053 devices have the same usb-id, and UAS is - * broken on the ASM1051, use the number of streams to differentiate. - * New ASM1053-s also support 32 streams, but have a different prod-id. + * ASMedia has a number of usb3 to sata bridge chips, at the time of + * this writing the following versions exist: + * ASM1051 - no uas support version + * ASM1051 - with broken (*) uas support + * ASM1053 - with working uas support + * ASM1153 - with working uas support + * + * Devices with these chips re-use a number of device-ids over the + * entire line, so the device-id is useless to determine if we're + * dealing with an ASM1051 (which we want to avoid). + * + * The ASM1153 can be identified by config.MaxPower == 0, + * where as the ASM105x models have config.MaxPower == 36. + * + * Differentiating between the ASM1053 and ASM1051 is trickier, when + * connected over USB-3 we can look at the number of streams supported, + * ASM1051 supports 32 streams, where as early ASM1053 versions support + * 16 streams, newer ASM1053-s also support 32 streams, but have a + * different prod-id. + * + * (*) ASM1051 chips do work with UAS with some disks (with the + * US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks */ if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c && - le16_to_cpu(udev->descriptor.idProduct) == 0x55aa) { - if (udev->speed < USB_SPEED_SUPER) { + (le16_to_cpu(udev->descriptor.idProduct) == 0x5106 || + le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) { + if (udev->actconfig->desc.bMaxPower == 0) { + /* ASM1153, do nothing */ + } else if (udev->speed < USB_SPEED_SUPER) { /* No streams info, assume ASM1051 */ flags |= US_FL_IGNORE_UAS; } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) { + /* Possibly an ASM1051, disable uas */ flags |= US_FL_IGNORE_UAS; } } diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index b5e3255d08f7..542a7d152dd1 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -106,14 +106,6 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES), -/* Most ASM1051 based devices have issues with uas, blacklist them all */ -/* Reported-by: Hans de Goede */ -UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999, - "ASMedia", - "ASM1051", - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_IGNORE_UAS), - /* Reported-by: Hans de Goede */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", -- cgit v1.2.3 From 3ca8c717429b90f621aed28af029da4c3da378bc Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 8 Jan 2015 15:15:15 +0100 Subject: uas: Add US_FL_NO_ATA_1X for 2 more Seagate disk enclosures Just like all previous UAS capable Seagate disk enclosures, these need the US_FL_NO_ATA_1X to not crash when udev probes them. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 542a7d152dd1..6df4357d9ee3 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -85,6 +85,13 @@ UNUSUAL_DEV(0x0bc2, 0xa013, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Hans de Goede */ +UNUSUAL_DEV(0x0bc2, 0xa0a4, 0x0000, 0x9999, + "Seagate", + "Backup Plus Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* https://bbs.archlinux.org/viewtopic.php?id=183190 */ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, "Seagate", @@ -99,6 +106,13 @@ UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: G. Richard Bellamy */ +UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999, + "Seagate", + "BUP Fast HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: Claudio Bizzarri */ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, "JMicron", -- cgit v1.2.3 From 56abcab833fafcfaeb2f5b25e0364c1dec45f53e Mon Sep 17 00:00:00 2001 From: Arseny Solokha Date: Sat, 6 Dec 2014 09:54:06 +0700 Subject: OHCI: add a quirk for ULi M5237 blocking on reset Commit 8dccddbc2368 ("OHCI: final fix for NVIDIA problems (I hope)") introduced into 3.1.9 broke boot on e.g. Freescale P2020DS development board. The code path that was previously specific to NVIDIA controllers had then become taken for all chips. However, the M5237 installed on the board wedges solid when accessing its base+OHCI_FMINTERVAL register, making it impossible to boot any kernel newer than 3.1.8 on this particular and apparently other similar machines. Don't readl() and writel() base+OHCI_FMINTERVAL on PCI ID 10b9:5237. The patch is suitable for the -next tree as well as all maintained kernels up to 3.2 inclusive. Signed-off-by: Arseny Solokha Acked-by: Alan Stern Cc: stable # 3.2 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index dd483c13565b..ce636466edb7 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -567,7 +567,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; u32 control; - u32 fminterval; + u32 fminterval = 0; + bool no_fminterval = false; int cnt; if (!mmio_resource_enabled(pdev, 0)) @@ -577,6 +578,13 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev) if (base == NULL) return; + /* + * ULi M5237 OHCI controller locks the whole system when accessing + * the OHCI_FMINTERVAL offset. + */ + if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237) + no_fminterval = true; + control = readl(base + OHCI_CONTROL); /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ @@ -615,7 +623,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev) } /* software reset of the controller, preserving HcFmInterval */ - fminterval = readl(base + OHCI_FMINTERVAL); + if (!no_fminterval) + fminterval = readl(base + OHCI_FMINTERVAL); + writel(OHCI_HCR, base + OHCI_CMDSTATUS); /* reset requires max 10 us delay */ @@ -624,7 +634,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev) break; udelay(1); } - writel(fminterval, base + OHCI_FMINTERVAL); + + if (!no_fminterval) + writel(fminterval, base + OHCI_FMINTERVAL); /* Now the controller is safely in SUSPEND and nothing can wake it up */ iounmap(base); -- cgit v1.2.3 From 9c9d82492b73991e8e13a6c0af06e44816c31438 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 6 Jan 2015 16:45:07 +0100 Subject: usb: phy: Fix deferred probing Commit 1290a958d48e ("usb: phy: propagate __of_usb_find_phy()'s error on failure") actually broke the deferred probing mechanism, since it now returns EPROBE_DEFER only when the try_module_get call fails, but not when the phy lookup does. All the other similar functions seem to return ENODEV when try_module_get fails, and the error code of either __usb_find_phy or __of_usb_find_phy otherwise. In order to have a consistent behaviour, and a meaningful EPROBE_DEFER, always return EPROBE_DEFER when __(of_)usb_find_phy fails to look up the requested phy, that will be propagated by the caller, and ENODEV if try_module_get fails. Signed-off-by: Maxime Ripard Tested-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index b4066a001ba0..353c686498d4 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -34,7 +34,7 @@ static struct usb_phy *__usb_find_phy(struct list_head *list, return phy; } - return ERR_PTR(-ENODEV); + return ERR_PTR(-EPROBE_DEFER); } static struct usb_phy *__usb_find_phy_dev(struct device *dev, @@ -66,7 +66,7 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node) return phy; } - return ERR_PTR(-ENODEV); + return ERR_PTR(-EPROBE_DEFER); } static void devm_usb_phy_release(struct device *dev, void *res) @@ -192,7 +192,7 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, phy = __of_usb_find_phy(node); if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { if (!IS_ERR(phy)) - phy = ERR_PTR(-EPROBE_DEFER); + phy = ERR_PTR(-ENODEV); devres_free(ptr); goto err1; -- cgit v1.2.3 From 42d6cfa0caec4b68a7f17147fbf13a36e94a8bf2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 6 Jan 2015 13:19:21 +0300 Subject: usb: gadget: gadgetfs: fix an oops in ep_write() We try to free an ERR_PTR on this error path. Fixes: b44be2462dbe ('usb: gadget: gadgetfs: Free memory allocated by memdup_user()') Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 08048613eed6..db49ec4c748e 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -441,6 +441,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) kbuf = memdup_user(buf, len); if (IS_ERR(kbuf)) { value = PTR_ERR(kbuf); + kbuf = NULL; goto free1; } -- cgit v1.2.3 From 5fb694f96e7c19e66b1c55124b98812e32e3efa5 Mon Sep 17 00:00:00 2001 From: Songjun Wu Date: Fri, 9 Jan 2015 17:11:24 +0100 Subject: usb: gadget: udc: atmel: fix possible oops when unloading module When unloading the module 'g_hid.ko', the urb request will be dequeued and the completion routine will be excuted. If there is no urb packet, the urb request will not be added to the endpoint queue and the completion routine pointer in urb request is NULL. Accessing to this NULL function pointer will cause the Oops issue reported below. Add the code to check if the urb request is in the endpoint queue or not. If the urb request is not in the endpoint queue, a negative error code will be returned. Here is the Oops log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = dedf0000 [00000000] *pgd=3ede5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 80000007 [#1] ARM Modules linked in: g_hid(-) usb_f_hid libcomposite CPU: 0 PID: 923 Comm: rmmod Not tainted 3.18.0+ #2 Hardware name: Atmel SAMA5 (Device Tree) task: df6b1100 ti: dedf6000 task.ti: dedf6000 PC is at 0x0 LR is at usb_gadget_giveback_request+0xc/0x10 pc : [<00000000>] lr : [] psr: 60000093 sp : dedf7eb0 ip : df572634 fp : 00000000 r10: 00000000 r9 : df52e210 r8 : 60000013 r7 : df6a9858 r6 : df52e210 r5 : df6a9858 r4 : df572600 r3 : 00000000 r2 : ffffff98 r1 : df572600 r0 : df6a9868 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 3edf0059 DAC: 00000015 Process rmmod (pid: 923, stack limit = 0xdedf6230) Stack: (0xdedf7eb0 to 0xdedf8000) 7ea0: 00000000 c02adbbc df572580 deced608 7ec0: df572600 df6a9868 df572634 c02aed3c df577c00 c01b8608 00000000 df6be27c 7ee0: 00200200 00100100 bf0162f4 c000e544 dedf6000 00000000 00000000 bf010c00 7f00: bf0162cc bf00159c 00000000 df572980 df52e218 00000001 df5729b8 bf0031d0 [..] [] (usb_gadget_giveback_request) from [] (request_complete+0x64/0x88) [] (request_complete) from [] (usba_ep_dequeue+0x70/0x128) [] (usba_ep_dequeue) from [] (hidg_unbind+0x50/0x7c [usb_f_hid]) [] (hidg_unbind [usb_f_hid]) from [] (remove_config.isra.6+0x98/0x9c [libcomposite]) [] (remove_config.isra.6 [libcomposite]) from [] (__composite_unbind+0x34/0x98 [libcomposite]) [] (__composite_unbind [libcomposite]) from [] (usb_gadget_remove_driver+0x50/0x78) [] (usb_gadget_remove_driver) from [] (usb_gadget_unregister_driver+0x64/0x94) [] (usb_gadget_unregister_driver) from [] (hidg_cleanup+0x10/0x34 [g_hid]) [] (hidg_cleanup [g_hid]) from [] (SyS_delete_module+0x118/0x19c) [] (SyS_delete_module) from [] (ret_fast_syscall+0x0/0x30) Code: bad PC value Signed-off-by: Songjun Wu [nicolas.ferre@atmel.com: reworked the commit message] Signed-off-by: Nicolas Ferre Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver") Cc: # 2.6.x-ish Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 93328ea7eb1b..9f93bed42052 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -828,7 +828,7 @@ static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) { struct usba_ep *ep = to_usba_ep(_ep); struct usba_udc *udc = ep->udc; - struct usba_request *req = to_usba_req(_req); + struct usba_request *req; unsigned long flags; u32 status; @@ -837,6 +837,16 @@ static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) spin_lock_irqsave(&udc->lock, flags); + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + + if (&req->req != _req) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + if (req->using_dma) { /* * If this request is currently being transferred, -- cgit v1.2.3 From d269d4434c72ed0da3a9b1230c30da82c4918c63 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 5 Jan 2015 16:04:12 +0100 Subject: USB: console: fix uninitialised ldisc semaphore The USB console currently allocates a temporary fake tty which is used to pass terminal settings to the underlying serial driver. The tty struct is not fully initialised, something which can lead to a lockdep warning (or worse) if a serial driver tries to acquire a line-discipline reference: usbserial: USB Serial support registered for pl2303 pl2303 1-2.1:1.0: pl2303 converter detected usb 1-2.1: pl2303 converter now attached to ttyUSB0 INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 68 Comm: udevd Tainted: G W 3.18.0-rc5 #10 [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x24/0x28) [] (dump_stack) from [] (__lock_acquire+0x1e50/0x2004) [] (__lock_acquire) from [] (lock_acquire+0xe4/0x18c) [] (lock_acquire) from [] (ldsem_down_read_trylock+0x78/0x90) [] (ldsem_down_read_trylock) from [] (tty_ldisc_ref+0x24/0x58) [] (tty_ldisc_ref) from [] (usb_serial_handle_dcd_change+0x48/0xe8) [] (usb_serial_handle_dcd_change) from [] (pl2303_read_int_callback+0x210/0x220 [pl2303]) [] (pl2303_read_int_callback [pl2303]) from [] (__usb_hcd_giveback_urb+0x80/0x140) [] (__usb_hcd_giveback_urb) from [] (usb_giveback_urb_bh+0x98/0xd4) [] (usb_giveback_urb_bh) from [] (tasklet_hi_action+0x9c/0x108) [] (tasklet_hi_action) from [] (__do_softirq+0x148/0x42c) [] (__do_softirq) from [] (irq_exit+0xd8/0x114) [] (irq_exit) from [] (__handle_domain_irq+0x84/0xdc) [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xd8/0xe0) [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x7c) Exception stack(0xdf4e7f08 to 0xdf4e7f50) 7f00: debc0b80 df4e7f5c 00000000 00000000 debc0b80 be8da96c 7f20: 00000000 00000128 c000fc84 df4e6000 00000000 df4e7f94 00000004 df4e7f50 7f40: c038ebc0 c038d74c 600f0013 ffffffff [] (__irq_svc) from [] (___sys_sendmsg.part.29+0x0/0x2e0) [] (___sys_sendmsg.part.29) from [] (SyS_sendmsg+0x18/0x1c) [] (SyS_sendmsg) from [] (ret_fast_syscall+0x0/0x48) console [ttyUSB0] enabled Fixes: 36697529b5bb ("tty: Replace ldisc locking with ldisc_sem") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/console.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 8d7fc48b1f30..e56f394b58d8 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -140,6 +140,7 @@ static int usb_console_setup(struct console *co, char *options) tty_port_tty_set(&port->port, tty); tty->driver = usb_serial_tty_driver; tty->index = co->index; + init_ldsem(&tty->ldisc_sem); if (tty_init_termios(tty)) { retval = -ENOMEM; goto free_tty; -- cgit v1.2.3 From 32a4bf2e81ec378e5925d4e069e0677a6c86a6ad Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 5 Jan 2015 16:04:13 +0100 Subject: USB: console: fix potential use after free Use tty kref to release the fake tty in usb_console_setup to avoid use after free if the underlying serial driver has acquired a reference. Note that using the tty destructor release_one_tty requires some more state to be initialised. Fixes: 4a90f09b20f4 ("tty: usb-serial krefs") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/console.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index e56f394b58d8..29fa1c3d0089 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -46,6 +46,8 @@ static struct console usbcons; * ------------------------------------------------------------ */ +static const struct tty_operations usb_console_fake_tty_ops = { +}; /* * The parsing of the command line works exactly like the @@ -137,14 +139,17 @@ static int usb_console_setup(struct console *co, char *options) goto reset_open_count; } kref_init(&tty->kref); - tty_port_tty_set(&port->port, tty); tty->driver = usb_serial_tty_driver; tty->index = co->index; init_ldsem(&tty->ldisc_sem); + INIT_LIST_HEAD(&tty->tty_files); + kref_get(&tty->driver->kref); + tty->ops = &usb_console_fake_tty_ops; if (tty_init_termios(tty)) { retval = -ENOMEM; - goto free_tty; + goto put_tty; } + tty_port_tty_set(&port->port, tty); } /* only call the device specific open if this @@ -162,7 +167,7 @@ static int usb_console_setup(struct console *co, char *options) serial->type->set_termios(tty, port, &dummy); tty_port_tty_set(&port->port, NULL); - kfree(tty); + tty_kref_put(tty); } set_bit(ASYNCB_INITIALIZED, &port->port.flags); } @@ -178,8 +183,8 @@ static int usb_console_setup(struct console *co, char *options) fail: tty_port_tty_set(&port->port, NULL); - free_tty: - kfree(tty); + put_tty: + tty_kref_put(tty); reset_open_count: port->port.count = 0; usb_autopm_put_interface(serial->interface); -- cgit v1.2.3 From aa8e22128b40590b291cd13512098bf258a7e6c5 Mon Sep 17 00:00:00 2001 From: Jeremiah Mahler Date: Sun, 11 Jan 2015 05:42:06 -0800 Subject: usb: serial: silence all non-critical read errors If a USB serial device is unplugged while there is an active program using the device it may spam the logs with -EPROTO (71) messages as it attempts to retry. Most serial usb drivers (metro-usb, pl2303, mos7840, ...) only output these messages for debugging. The generic driver treats these as errors. Change the default output for the generic serial driver from error to debug to silence these non-critical errors. Signed-off-by: Jeremiah Mahler Signed-off-by: Johan Hovold --- drivers/usb/serial/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 1bd192290b08..2d7207b9f6a4 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -373,7 +373,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) __func__, urb->status); return; default: - dev_err(&port->dev, "%s - nonzero urb status: %d\n", + dev_dbg(&port->dev, "%s - nonzero urb status: %d\n", __func__, urb->status); goto resubmit; } -- cgit v1.2.3 From 04f9c6e6d17584340fb6c8a9469a0e6df28876d2 Mon Sep 17 00:00:00 2001 From: Jeremiah Mahler Date: Sun, 11 Jan 2015 05:42:07 -0800 Subject: usb: serial: handle -ENODEV quietly in generic_submit_read_urb If a USB serial device (e.g. /dev/ttyUSB0) with an active program is unplugged, an -ENODEV (19) error will be produced after it gives up trying to resubmit a read. usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19 Add -ENODEV as one of the permanent errors along with -EPERM that usb_serial_generic_submit_read_urb() handles quietly without an error. Signed-off-by: Jeremiah Mahler Signed-off-by: Johan Hovold --- drivers/usb/serial/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 2d7207b9f6a4..ccf1df7c4b80 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -286,7 +286,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, res = usb_submit_urb(port->read_urbs[index], mem_flags); if (res) { - if (res != -EPERM) { + if (res != -EPERM && res != -ENODEV) { dev_err(&port->dev, "%s - usb_submit_urb failed: %d\n", __func__, res); -- cgit v1.2.3 From 90bdf403db4ca75ee60ca5a760dc342cef96b5e1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 13 Jan 2015 15:25:11 +0100 Subject: usb: phy: mv-usb: fix usb_phy build errors The driver was recently adapted to a core API change, but the change was incomplete, missing out the suspend helper and leaving an extraneous local variable around: usb/phy/phy-mv-usb.c: In function 'mv_otg_update_state': usb/phy/phy-mv-usb.c:341:18: warning: unused variable 'phy' [-Wunused-variable] usb/phy/phy-mv-usb.c: In function 'mv_otg_suspend': usb/phy/phy-mv-usb.c:861:16: error: 'struct usb_phy' has no member named 'state' Signed-off-by: Arnd Bergmann Fixes: e47d92545c297 ("usb: move the OTG state from the USB PHY to the OTG structure") Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mv-usb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index 699e38c73d82..697a741a0cb1 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -338,7 +338,6 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg) static void mv_otg_update_state(struct mv_otg *mvotg) { struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; - struct usb_phy *phy = &mvotg->phy; int old_state = mvotg->phy.otg->state; switch (old_state) { @@ -858,10 +857,10 @@ static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state) { struct mv_otg *mvotg = platform_get_drvdata(pdev); - if (mvotg->phy.state != OTG_STATE_B_IDLE) { + if (mvotg->phy.otg->state != OTG_STATE_B_IDLE) { dev_info(&pdev->dev, "OTG state is not B_IDLE, it is %d!\n", - mvotg->phy.state); + mvotg->phy.otg->state); return -EAGAIN; } -- cgit v1.2.3 From ec512fb8e5611fed1df2895f90317ce6797d6b32 Mon Sep 17 00:00:00 2001 From: Amit Virdi Date: Tue, 13 Jan 2015 14:27:20 +0530 Subject: usb: dwc3: gadget: Fix TRB preparation during SG When scatter gather (SG) is used, multiple TRBs are prepared from one DWC3 request (dwc3_request). So while preparing TRBs, the 'last' flag should be set only when it is the last TRB being prepared from the last dwc3_request entry. The current implementation uses list_is_last to check if the dwc3_request is the last entry from the request_list. However, list_is_last returns false for the last entry too. This is because, while preparing the first TRB from a request, the function dwc3_prepare_one_trb modifies the request's next and prev pointers while moving the URB to req_queued. Hence, list_is_last always returns false no matter what. The correct way is not to access the modified pointers of dwc3_request but to use list_empty macro instead. Fixes: e5ba5ec833aa (usb: dwc3: gadget: fix scatter gather implementation) Signed-off-by: Amit Virdi Cc: # v3.9+ Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index f03b136ecfce..0eec2e917994 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -882,8 +882,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) if (i == (request->num_mapped_sgs - 1) || sg_is_last(s)) { - if (list_is_last(&req->list, - &dep->request_list)) + if (list_empty(&dep->request_list)) last_one = true; chain = false; } -- cgit v1.2.3 From 39e60635a01520e8c8ed3946a28c2b98e6a46f79 Mon Sep 17 00:00:00 2001 From: Amit Virdi Date: Tue, 13 Jan 2015 14:27:21 +0530 Subject: usb: dwc3: gadget: Stop TRB preparation after limit is reached DWC3 gadget sets up a pool of 32 TRBs for each EP during initialization. This means, the max TRBs that can be submitted for an EP is fixed to 32. Since the request queue for an EP is a linked list, any number of requests can be queued to it by the gadget layer. However, the dwc3 driver must not submit TRBs more than the pool it has created for. This limit wasn't respected when SG was used resulting in submitting more than the max TRBs, eventually leading to non-transfer of the TRBs submitted over the max limit. Root cause: When SG is used, there are two loops iterating to prepare TRBs: - Outer loop over the request_list - Inner loop over the SG list The code was missing break to get out of the outer loop. Fixes: eeb720fb21d6 (usb: dwc3: gadget: add support for SG lists) Cc: # v3.9+ Signed-off-by: Amit Virdi Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 0eec2e917994..8f65ab3a3b92 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -900,6 +900,9 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) if (last_one) break; } + + if (last_one) + break; } else { dma = req->request.dma; length = req->request.length; -- cgit v1.2.3