From 079adf05398f12371ea91dd53fdf61ee6352bc01 Mon Sep 17 00:00:00 2001
From: Eran Ben Elisha <eranbe@mellanox.com>
Date: Thu, 1 Jun 2017 09:40:56 +0300
Subject: net/mlx5: Clean SRIOV eswitch resources upon VF creation failure

Upon sriov enable, eswitch is always enabled.
Currently, if enable hca failed over all VFs, we would skip eswitch
disable as part of sriov disable, which will lead to resources leak.

Fix it by disabling eswitch if it was enabled (use indication from
eswitch mode).

Fixes: 6b6adee3dad2 ('net/mlx5: SRIOV core code refactoring')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 3 ++-
 drivers/net/ethernet/mellanox/mlx5/core/sriov.c   | 5 +++++
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 89bfda419efe..8b18cc9ec026 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1668,7 +1668,8 @@ void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw)
 	int i;
 
 	if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager) ||
-	    MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
+	    MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH ||
+	    esw->mode == SRIOV_NONE)
 		return;
 
 	esw_info(esw->dev, "disable SRIOV: active vports(%d) mode(%d)\n",
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
index bcdf7779c48d..bf99d40e30b4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
@@ -88,7 +88,11 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev)
 	int vf;
 
 	if (!sriov->enabled_vfs)
+#ifdef CONFIG_MLX5_CORE_EN
+		goto disable_sriov_resources;
+#else
 		return;
+#endif
 
 	for (vf = 0; vf < sriov->num_vfs; vf++) {
 		if (!sriov->vfs_ctx[vf].enabled)
@@ -103,6 +107,7 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev)
 	}
 
 #ifdef CONFIG_MLX5_CORE_EN
+disable_sriov_resources:
 	mlx5_eswitch_disable_sriov(dev->priv.eswitch);
 #endif
 
-- 
cgit v1.2.3


From dc798b4cc0f2a06e7ad7d522403de274b86a0a6f Mon Sep 17 00:00:00 2001
From: Aviv Heller <avivh@mellanox.com>
Date: Sun, 2 Jul 2017 19:13:43 +0300
Subject: net/mlx5: Consider tx_enabled in all modes on remap

The tx_enabled lag event field is used to determine whether a slave is
active.
Current logic uses this value only if the mode is active-backup.

However, LACP mode, although considered a load balancing mode, can mark
a slave as inactive in certain situations (e.g., LACP timeout).

This fix takes the tx_enabled value into account when remapping, with
no respect to the LAG mode (this should not affect the behavior in XOR
mode, since in this mode both slaves are marked as active).

Fixes: 7907f23adc18 (net/mlx5: Implement RoCE LAG feature)
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index a3a836bdcfd2..f26f97fe4666 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -162,22 +162,17 @@ static bool mlx5_lag_is_bonded(struct mlx5_lag *ldev)
 static void mlx5_infer_tx_affinity_mapping(struct lag_tracker *tracker,
 					   u8 *port1, u8 *port2)
 {
-	if (tracker->tx_type == NETDEV_LAG_TX_TYPE_ACTIVEBACKUP) {
-		if (tracker->netdev_state[0].tx_enabled) {
-			*port1 = 1;
-			*port2 = 1;
-		} else {
-			*port1 = 2;
-			*port2 = 2;
-		}
-	} else {
-		*port1 = 1;
-		*port2 = 2;
-		if (!tracker->netdev_state[0].link_up)
-			*port1 = 2;
-		else if (!tracker->netdev_state[1].link_up)
-			*port2 = 1;
+	*port1 = 1;
+	*port2 = 2;
+	if (!tracker->netdev_state[0].tx_enabled ||
+	    !tracker->netdev_state[0].link_up) {
+		*port1 = 2;
+		return;
 	}
+
+	if (!tracker->netdev_state[1].tx_enabled ||
+	    !tracker->netdev_state[1].link_up)
+		*port2 = 1;
 }
 
 static void mlx5_activate_lag(struct mlx5_lag *ldev,
-- 
cgit v1.2.3


From 061870800efb4e3d1ad4082a2569363629bdfcfc Mon Sep 17 00:00:00 2001
From: Moshe Shemesh <moshe@mellanox.com>
Date: Thu, 6 Jul 2017 15:48:40 +0300
Subject: net/mlx5: Fix command completion after timeout access invalid
 structure

Completion on timeout should not free the driver command entry structure
as it will need to access it again once real completion event from FW
will occur.

Fixes: 73dd3a4839c1 ('net/mlx5: Avoid using pending command interface slots')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index f5a2c605749f..25fd32fcdf79 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -967,7 +967,7 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in,
 
 	err = wait_func(dev, ent);
 	if (err == -ETIMEDOUT)
-		goto out_free;
+		goto out;
 
 	ds = ent->ts2 - ent->ts1;
 	op = MLX5_GET(mbox_in, in->first.data, opcode);
@@ -1430,6 +1430,7 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool forced)
 					mlx5_core_err(dev, "Command completion arrived after timeout (entry idx = %d).\n",
 						      ent->idx);
 					free_ent(cmd, ent->idx);
+					free_cmd(ent);
 				}
 				continue;
 			}
@@ -1488,7 +1489,8 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool forced)
 				free_msg(dev, ent->in);
 
 				err = err ? err : ent->status;
-				free_cmd(ent);
+				if (!forced)
+					free_cmd(ent);
 				callback(err, context);
 			} else {
 				complete(&ent->done);
-- 
cgit v1.2.3


From 219c81f7d1d5a89656cb3b53d3b4e11e93608d80 Mon Sep 17 00:00:00 2001
From: Moshe Shemesh <moshe@mellanox.com>
Date: Sun, 25 Jun 2017 18:45:32 +0300
Subject: net/mlx5: Fix command bad flow on command entry allocation failure

When driver fail to allocate an entry to send command to FW, it must
notify the calling function and release the memory allocated for
this command.

Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 25fd32fcdf79..31cbe5e86a01 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -786,6 +786,10 @@ static void cb_timeout_handler(struct work_struct *work)
 	mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 }
 
+static void free_msg(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *msg);
+static void mlx5_free_cmd_msg(struct mlx5_core_dev *dev,
+			      struct mlx5_cmd_msg *msg);
+
 static void cmd_work_handler(struct work_struct *work)
 {
 	struct mlx5_cmd_work_ent *ent = container_of(work, struct mlx5_cmd_work_ent, work);
@@ -796,17 +800,28 @@ static void cmd_work_handler(struct work_struct *work)
 	struct semaphore *sem;
 	unsigned long flags;
 	bool poll_cmd = ent->polling;
+	int alloc_ret;
 
 
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
 	if (!ent->page_queue) {
-		ent->idx = alloc_ent(cmd);
-		if (ent->idx < 0) {
+		alloc_ret = alloc_ent(cmd);
+		if (alloc_ret < 0) {
 			mlx5_core_err(dev, "failed to allocate command entry\n");
+			if (ent->callback) {
+				ent->callback(-EAGAIN, ent->context);
+				mlx5_free_cmd_msg(dev, ent->out);
+				free_msg(dev, ent->in);
+				free_cmd(ent);
+			} else {
+				ent->ret = -EAGAIN;
+				complete(&ent->done);
+			}
 			up(sem);
 			return;
 		}
+		ent->idx = alloc_ret;
 	} else {
 		ent->idx = cmd->max_reg_cmds;
 		spin_lock_irqsave(&cmd->alloc_lock, flags);
-- 
cgit v1.2.3


From 58569ef8f619761548e7d198f59e8ebe3af91d04 Mon Sep 17 00:00:00 2001
From: Alex Vesker <valex@mellanox.com>
Date: Thu, 6 Jul 2017 15:40:32 +0300
Subject: net/mlx5e: IPoIB, Modify add/remove underlay QPN flows

On interface remove, the clean-up was done incorrectly causing
an error in the log:
"SET_FLOW_TABLE_ROOT(0x92f) op_mod(0x0) failed...syndrome (0x7e9f14)"

This was caused by the following flow:
-ndo_uninit:
 Move QP state to RST (this disconnects the QP from FT),
 the QP cannot be attached to any FT unless it is in RTS.

-mlx5_rdma_netdev_free:
 cleanup_rx: Destroy FT
 cleanup_tx: Destroy QP and remove QPN from FT

This caused a problem when destroying current FT we tried to
re-attach the QP to the next FT which is not needed.

The correct flow is:
-mlx5_rdma_netdev_free:
	cleanup_rx: remove QPN from FT & Destroy FT
	cleanup_tx: Destroy QP

Fixes: 508541146af1 ("net/mlx5: Use underlay QPN from the root name space")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 1ee5bce85901..85298051a3e4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -178,8 +178,6 @@ out:
 
 static void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp)
 {
-	mlx5_fs_remove_rx_underlay_qpn(mdev, qp->qpn);
-
 	mlx5_core_destroy_qp(mdev, qp);
 }
 
@@ -194,8 +192,6 @@ static int mlx5i_init_tx(struct mlx5e_priv *priv)
 		return err;
 	}
 
-	mlx5_fs_add_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
-
 	err = mlx5e_create_tis(priv->mdev, 0 /* tc */, ipriv->qp.qpn, &priv->tisn[0]);
 	if (err) {
 		mlx5_core_warn(priv->mdev, "create tis failed, %d\n", err);
@@ -253,6 +249,7 @@ static void mlx5i_destroy_flow_steering(struct mlx5e_priv *priv)
 
 static int mlx5i_init_rx(struct mlx5e_priv *priv)
 {
+	struct mlx5i_priv *ipriv  = priv->ppriv;
 	int err;
 
 	err = mlx5e_create_indirect_rqt(priv);
@@ -271,12 +268,18 @@ static int mlx5i_init_rx(struct mlx5e_priv *priv)
 	if (err)
 		goto err_destroy_indirect_tirs;
 
-	err = mlx5i_create_flow_steering(priv);
+	err = mlx5_fs_add_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
 	if (err)
 		goto err_destroy_direct_tirs;
 
+	err = mlx5i_create_flow_steering(priv);
+	if (err)
+		goto err_remove_rx_underlay_qpn;
+
 	return 0;
 
+err_remove_rx_underlay_qpn:
+	mlx5_fs_remove_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv);
 err_destroy_indirect_tirs:
@@ -290,6 +293,9 @@ err_destroy_indirect_rqts:
 
 static void mlx5i_cleanup_rx(struct mlx5e_priv *priv)
 {
+	struct mlx5i_priv *ipriv  = priv->ppriv;
+
+	mlx5_fs_remove_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
 	mlx5i_destroy_flow_steering(priv);
 	mlx5e_destroy_direct_tirs(priv);
 	mlx5e_destroy_indirect_tirs(priv);
-- 
cgit v1.2.3


From 0242f4a0bb03906010bbf80495512be00494a0ef Mon Sep 17 00:00:00 2001
From: Ilan Tayari <ilant@mellanox.com>
Date: Wed, 5 Jul 2017 10:17:04 +0300
Subject: net/mlx5e: Fix outer_header_zero() check size

outer_header_zero() routine checks if the outer_headers match of a
flow-table entry are all zero.

This function uses the size of whole fte_match_param, instead of just
the outer_headers member, causing failure to detect all-zeros if
any other members of the fte_match_param are non-zero.

Use the correct size for zero check.

Fixes: 6dc6071cfcde ("net/mlx5e: Add ethtool flow steering support")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
index bdd82c9b3992..22fb993987b4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
@@ -276,7 +276,7 @@ static void add_rule_to_list(struct mlx5e_priv *priv,
 
 static bool outer_header_zero(u32 *match_criteria)
 {
-	int size = MLX5_ST_SZ_BYTES(fte_match_param);
+	int size = MLX5_FLD_SZ_BYTES(fte_match_param, outer_headers);
 	char *outer_headers_c = MLX5_ADDR_OF(fte_match_param, match_criteria,
 					     outer_headers);
 
-- 
cgit v1.2.3


From fa3676885e3b5be1edfa1b2cc775e20a45b34a19 Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Thu, 25 May 2017 16:09:34 +0300
Subject: net/mlx5e: Add field select to MTPPS register

In order to mark relevant fields while setting the MTPPS register
add field select. Otherwise it can cause a misconfiguration in
firmware.

Fixes: ee7f12205abc ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_clock.c | 29 +++++++++++++++++-----
 drivers/net/ethernet/mellanox/mlx5/core/eq.c       |  2 +-
 .../net/ethernet/mellanox/mlx5/core/mlx5_core.h    |  5 ++++
 include/linux/mlx5/mlx5_ifc.h                      | 10 +++++---
 4 files changed, 36 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index 66f432385dbb..ab07233e2faa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -53,6 +53,15 @@ enum {
 	MLX5E_EVENT_MODE_ONCE_TILL_ARM	= 0x2,
 };
 
+enum {
+	MLX5E_MTPPS_FS_ENABLE			= BIT(0x0),
+	MLX5E_MTPPS_FS_PATTERN			= BIT(0x2),
+	MLX5E_MTPPS_FS_PIN_MODE			= BIT(0x3),
+	MLX5E_MTPPS_FS_TIME_STAMP		= BIT(0x4),
+	MLX5E_MTPPS_FS_OUT_PULSE_DURATION	= BIT(0x5),
+	MLX5E_MTPPS_FS_ENH_OUT_PER_ADJ		= BIT(0x7),
+};
+
 void mlx5e_fill_hwstamp(struct mlx5e_tstamp *tstamp, u64 timestamp,
 			struct skb_shared_hwtstamps *hwts)
 {
@@ -221,7 +230,10 @@ static int mlx5e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 delta)
 
 		/* For future use need to add a loop for finding all 1PPS out pins */
 		MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_OUT);
-		MLX5_SET(mtpps_reg, in, out_periodic_adjustment, delta & 0xFFFF);
+		MLX5_SET(mtpps_reg, in, enhanced_out_periodic_adjustment, delta);
+		MLX5_SET(mtpps_reg, in, field_select,
+			 MLX5E_MTPPS_FS_PIN_MODE |
+			 MLX5E_MTPPS_FS_ENH_OUT_PER_ADJ);
 
 		mlx5_set_mtpps(priv->mdev, in, sizeof(in));
 	}
@@ -257,8 +269,7 @@ static int mlx5e_extts_configure(struct ptp_clock_info *ptp,
 	int pin = -1;
 	int err = 0;
 
-	if (!MLX5_CAP_GEN(priv->mdev, pps) ||
-	    !MLX5_CAP_GEN(priv->mdev, pps_modify))
+	if (!MLX5_PPS_CAP(priv->mdev))
 		return -EOPNOTSUPP;
 
 	if (rq->extts.index >= tstamp->ptp_info.n_pins)
@@ -277,6 +288,9 @@ static int mlx5e_extts_configure(struct ptp_clock_info *ptp,
 	MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_IN);
 	MLX5_SET(mtpps_reg, in, pattern, pattern);
 	MLX5_SET(mtpps_reg, in, enable, on);
+	MLX5_SET(mtpps_reg, in, field_select, MLX5E_MTPPS_FS_PIN_MODE |
+					      MLX5E_MTPPS_FS_PATTERN |
+					      MLX5E_MTPPS_FS_ENABLE);
 
 	err = mlx5_set_mtpps(priv->mdev, in, sizeof(in));
 	if (err)
@@ -302,7 +316,7 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 	int pin = -1;
 	s64 ns;
 
-	if (!MLX5_CAP_GEN(priv->mdev, pps_modify))
+	if (!MLX5_PPS_CAP(priv->mdev))
 		return -EOPNOTSUPP;
 
 	if (rq->perout.index >= tstamp->ptp_info.n_pins)
@@ -337,7 +351,10 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 	MLX5_SET(mtpps_reg, in, pattern, MLX5E_OUT_PATTERN_PERIODIC);
 	MLX5_SET(mtpps_reg, in, enable, on);
 	MLX5_SET64(mtpps_reg, in, time_stamp, time_stamp);
-
+	MLX5_SET(mtpps_reg, in, field_select, MLX5E_MTPPS_FS_PIN_MODE |
+					      MLX5E_MTPPS_FS_PATTERN |
+					      MLX5E_MTPPS_FS_ENABLE |
+					      MLX5E_MTPPS_FS_TIME_STAMP);
 	return mlx5_set_mtpps(priv->mdev, in, sizeof(in));
 }
 
@@ -487,7 +504,7 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
 #define MAX_PIN_NUM	8
 	tstamp->pps_pin_caps = kzalloc(sizeof(u8) * MAX_PIN_NUM, GFP_KERNEL);
 	if (tstamp->pps_pin_caps) {
-		if (MLX5_CAP_GEN(priv->mdev, pps))
+		if (MLX5_PPS_CAP(priv->mdev))
 			mlx5e_get_pps_caps(priv, tstamp);
 		if (tstamp->ptp_info.n_pins)
 			mlx5e_init_pin_config(tstamp);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
index af51a5d2b912..52b9a64cd3a2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
@@ -698,7 +698,7 @@ int mlx5_start_eqs(struct mlx5_core_dev *dev)
 	else
 		mlx5_core_dbg(dev, "port_module_event is not set\n");
 
-	if (MLX5_CAP_GEN(dev, pps))
+	if (MLX5_PPS_CAP(dev))
 		async_event_mask |= (1ull << MLX5_EVENT_TYPE_PPS_EVENT);
 
 	if (MLX5_CAP_GEN(dev, fpga))
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index 6a3d6bef7dd4..6a263e8d883a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -154,6 +154,11 @@ int mlx5_set_mtpps(struct mlx5_core_dev *mdev, u32 *mtpps, u32 mtpps_size);
 int mlx5_query_mtppse(struct mlx5_core_dev *mdev, u8 pin, u8 *arm, u8 *mode);
 int mlx5_set_mtppse(struct mlx5_core_dev *mdev, u8 pin, u8 arm, u8 mode);
 
+#define MLX5_PPS_CAP(mdev) (MLX5_CAP_GEN((mdev), pps) &&		\
+			    MLX5_CAP_GEN((mdev), pps_modify) &&		\
+			    MLX5_CAP_MCAM_FEATURE((mdev), mtpps_fs) &&	\
+			    MLX5_CAP_MCAM_FEATURE((mdev), mtpps_enh_out_per_adj))
+
 int mlx5_firmware_flash(struct mlx5_core_dev *dev, const struct firmware *fw);
 
 void mlx5e_init(void);
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index fd98aef4545c..3030121b4746 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -7749,8 +7749,10 @@ struct mlx5_ifc_pcam_reg_bits {
 };
 
 struct mlx5_ifc_mcam_enhanced_features_bits {
-	u8         reserved_at_0[0x7f];
+	u8         reserved_at_0[0x7d];
 
+	u8         mtpps_enh_out_per_adj[0x1];
+	u8         mtpps_fs[0x1];
 	u8         pcie_performance_group[0x1];
 };
 
@@ -8159,7 +8161,8 @@ struct mlx5_ifc_mtpps_reg_bits {
 	u8         reserved_at_78[0x4];
 	u8         cap_pin_4_mode[0x4];
 
-	u8         reserved_at_80[0x80];
+	u8         field_select[0x20];
+	u8         reserved_at_a0[0x60];
 
 	u8         enable[0x1];
 	u8         reserved_at_101[0xb];
@@ -8174,8 +8177,9 @@ struct mlx5_ifc_mtpps_reg_bits {
 
 	u8         out_pulse_duration[0x10];
 	u8         out_periodic_adjustment[0x10];
+	u8         enhanced_out_periodic_adjustment[0x20];
 
-	u8         reserved_at_1a0[0x40];
+	u8         reserved_at_1c0[0x20];
 };
 
 struct mlx5_ifc_mtppse_reg_bits {
-- 
cgit v1.2.3


From 49c5031ca6f0628ef973a11b17e463e088bf859e Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 28 May 2017 12:01:38 +0300
Subject: net/mlx5e: Fix broken disable 1PPS flow

Need to disable the MTPPS and unsubscribe from the pulse events
when user disables the 1PPS functionality.

Fixes: ee7f12205abc ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_clock.c | 75 +++++++++++++---------
 1 file changed, 46 insertions(+), 29 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index ab07233e2faa..25d43767c888 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -265,6 +265,8 @@ static int mlx5e_extts_configure(struct ptp_clock_info *ptp,
 	struct mlx5e_priv *priv =
 		container_of(tstamp, struct mlx5e_priv, tstamp);
 	u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
+	u32 field_select = 0;
+	u8 pin_mode = 0;
 	u8 pattern = 0;
 	int pin = -1;
 	int err = 0;
@@ -279,18 +281,21 @@ static int mlx5e_extts_configure(struct ptp_clock_info *ptp,
 		pin = ptp_find_pin(tstamp->ptp, PTP_PF_EXTTS, rq->extts.index);
 		if (pin < 0)
 			return -EBUSY;
+		pin_mode = MLX5E_PIN_MODE_IN;
+		pattern = !!(rq->extts.flags & PTP_FALLING_EDGE);
+		field_select = MLX5E_MTPPS_FS_PIN_MODE |
+			       MLX5E_MTPPS_FS_PATTERN |
+			       MLX5E_MTPPS_FS_ENABLE;
+	} else {
+		pin = rq->extts.index;
+		field_select = MLX5E_MTPPS_FS_ENABLE;
 	}
 
-	if (rq->extts.flags & PTP_FALLING_EDGE)
-		pattern = 1;
-
 	MLX5_SET(mtpps_reg, in, pin, pin);
-	MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_IN);
+	MLX5_SET(mtpps_reg, in, pin_mode, pin_mode);
 	MLX5_SET(mtpps_reg, in, pattern, pattern);
 	MLX5_SET(mtpps_reg, in, enable, on);
-	MLX5_SET(mtpps_reg, in, field_select, MLX5E_MTPPS_FS_PIN_MODE |
-					      MLX5E_MTPPS_FS_PATTERN |
-					      MLX5E_MTPPS_FS_ENABLE);
+	MLX5_SET(mtpps_reg, in, field_select, field_select);
 
 	err = mlx5_set_mtpps(priv->mdev, in, sizeof(in));
 	if (err)
@@ -313,6 +318,9 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 	u64 cycles_now, cycles_delta;
 	struct timespec64 ts;
 	unsigned long flags;
+	u32 field_select = 0;
+	u8 pin_mode = 0;
+	u8 pattern = 0;
 	int pin = -1;
 	s64 ns;
 
@@ -327,34 +335,43 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 				   rq->perout.index);
 		if (pin < 0)
 			return -EBUSY;
-	}
 
-	ts.tv_sec = rq->perout.period.sec;
-	ts.tv_nsec = rq->perout.period.nsec;
-	ns = timespec64_to_ns(&ts);
-	if (on)
+		pin_mode = MLX5E_PIN_MODE_OUT;
+		pattern = MLX5E_OUT_PATTERN_PERIODIC;
+		ts.tv_sec = rq->perout.period.sec;
+		ts.tv_nsec = rq->perout.period.nsec;
+		ns = timespec64_to_ns(&ts);
+
 		if ((ns >> 1) != 500000000LL)
 			return -EINVAL;
-	ts.tv_sec = rq->perout.start.sec;
-	ts.tv_nsec = rq->perout.start.nsec;
-	ns = timespec64_to_ns(&ts);
-	cycles_now = mlx5_read_internal_timer(tstamp->mdev);
-	write_lock_irqsave(&tstamp->lock, flags);
-	nsec_now = timecounter_cyc2time(&tstamp->clock, cycles_now);
-	nsec_delta = ns - nsec_now;
-	cycles_delta = div64_u64(nsec_delta << tstamp->cycles.shift,
-				 tstamp->cycles.mult);
-	write_unlock_irqrestore(&tstamp->lock, flags);
-	time_stamp = cycles_now + cycles_delta;
+
+		ts.tv_sec = rq->perout.start.sec;
+		ts.tv_nsec = rq->perout.start.nsec;
+		ns = timespec64_to_ns(&ts);
+		cycles_now = mlx5_read_internal_timer(tstamp->mdev);
+		write_lock_irqsave(&tstamp->lock, flags);
+		nsec_now = timecounter_cyc2time(&tstamp->clock, cycles_now);
+		nsec_delta = ns - nsec_now;
+		cycles_delta = div64_u64(nsec_delta << tstamp->cycles.shift,
+					 tstamp->cycles.mult);
+		write_unlock_irqrestore(&tstamp->lock, flags);
+		time_stamp = cycles_now + cycles_delta;
+		field_select = MLX5E_MTPPS_FS_PIN_MODE |
+			       MLX5E_MTPPS_FS_PATTERN |
+			       MLX5E_MTPPS_FS_ENABLE |
+			       MLX5E_MTPPS_FS_TIME_STAMP;
+	} else {
+		pin = rq->perout.index;
+		field_select = MLX5E_MTPPS_FS_ENABLE;
+	}
+
 	MLX5_SET(mtpps_reg, in, pin, pin);
-	MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_OUT);
-	MLX5_SET(mtpps_reg, in, pattern, MLX5E_OUT_PATTERN_PERIODIC);
+	MLX5_SET(mtpps_reg, in, pin_mode, pin_mode);
+	MLX5_SET(mtpps_reg, in, pattern, pattern);
 	MLX5_SET(mtpps_reg, in, enable, on);
 	MLX5_SET64(mtpps_reg, in, time_stamp, time_stamp);
-	MLX5_SET(mtpps_reg, in, field_select, MLX5E_MTPPS_FS_PIN_MODE |
-					      MLX5E_MTPPS_FS_PATTERN |
-					      MLX5E_MTPPS_FS_ENABLE |
-					      MLX5E_MTPPS_FS_TIME_STAMP);
+	MLX5_SET(mtpps_reg, in, field_select, field_select);
+
 	return mlx5_set_mtpps(priv->mdev, in, sizeof(in));
 }
 
-- 
cgit v1.2.3


From 4272f9b88db9223216cdf87314f570f6d81295b4 Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 28 May 2017 14:06:01 +0300
Subject: net/mlx5e: Change 1PPS out scheme

In order to fix the drift in 1PPS out need to adjust the next pulse.
On each 1PPS out falling edge driver gets the event, then the event
handler adjusts the next pulse starting time.

Fixes: ee7f12205abc ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |   9 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_clock.c | 116 ++++++++++++++-------
 2 files changed, 87 insertions(+), 38 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index e1b7ddfecd01..d42826f0f0d6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -266,6 +266,13 @@ struct mlx5e_dcbx {
 };
 #endif
 
+#define MAX_PIN_NUM	8
+struct mlx5e_pps {
+	u8                         pin_caps[MAX_PIN_NUM];
+	struct work_struct         out_work;
+	u64                        start[MAX_PIN_NUM];
+};
+
 struct mlx5e_tstamp {
 	rwlock_t                   lock;
 	struct cyclecounter        cycles;
@@ -277,7 +284,7 @@ struct mlx5e_tstamp {
 	struct mlx5_core_dev      *mdev;
 	struct ptp_clock          *ptp;
 	struct ptp_clock_info      ptp_info;
-	u8                        *pps_pin_caps;
+	struct mlx5e_pps           pps_info;
 };
 
 enum {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index 25d43767c888..464ddd10ebbc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -82,6 +82,33 @@ static u64 mlx5e_read_internal_timer(const struct cyclecounter *cc)
 	return mlx5_read_internal_timer(tstamp->mdev) & cc->mask;
 }
 
+static void mlx5e_pps_out(struct work_struct *work)
+{
+	struct mlx5e_pps *pps_info = container_of(work, struct mlx5e_pps,
+						  out_work);
+	struct mlx5e_tstamp *tstamp = container_of(pps_info, struct mlx5e_tstamp,
+						   pps_info);
+	u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
+	unsigned long flags;
+	int i;
+
+	for (i = 0; i < tstamp->ptp_info.n_pins; i++) {
+		u64 tstart;
+
+		write_lock_irqsave(&tstamp->lock, flags);
+		tstart = tstamp->pps_info.start[i];
+		tstamp->pps_info.start[i] = 0;
+		write_unlock_irqrestore(&tstamp->lock, flags);
+		if (!tstart)
+			continue;
+
+		MLX5_SET(mtpps_reg, in, pin, i);
+		MLX5_SET64(mtpps_reg, in, time_stamp, tstart);
+		MLX5_SET(mtpps_reg, in, field_select, MLX5E_MTPPS_FS_TIME_STAMP);
+		mlx5_set_mtpps(tstamp->mdev, in, sizeof(in));
+	}
+}
+
 static void mlx5e_timestamp_overflow(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
@@ -222,21 +249,6 @@ static int mlx5e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 delta)
 	int neg_adj = 0;
 	struct mlx5e_tstamp *tstamp = container_of(ptp, struct mlx5e_tstamp,
 						  ptp_info);
-	struct mlx5e_priv *priv =
-		container_of(tstamp, struct mlx5e_priv, tstamp);
-
-	if (MLX5_CAP_GEN(priv->mdev, pps_modify)) {
-		u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
-
-		/* For future use need to add a loop for finding all 1PPS out pins */
-		MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_OUT);
-		MLX5_SET(mtpps_reg, in, enhanced_out_periodic_adjustment, delta);
-		MLX5_SET(mtpps_reg, in, field_select,
-			 MLX5E_MTPPS_FS_PIN_MODE |
-			 MLX5E_MTPPS_FS_ENH_OUT_PER_ADJ);
-
-		mlx5_set_mtpps(priv->mdev, in, sizeof(in));
-	}
 
 	if (delta < 0) {
 		neg_adj = 1;
@@ -314,7 +326,7 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 	struct mlx5e_priv *priv =
 		container_of(tstamp, struct mlx5e_priv, tstamp);
 	u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
-	u64 nsec_now, nsec_delta, time_stamp;
+	u64 nsec_now, nsec_delta, time_stamp = 0;
 	u64 cycles_now, cycles_delta;
 	struct timespec64 ts;
 	unsigned long flags;
@@ -322,6 +334,7 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 	u8 pin_mode = 0;
 	u8 pattern = 0;
 	int pin = -1;
+	int err = 0;
 	s64 ns;
 
 	if (!MLX5_PPS_CAP(priv->mdev))
@@ -372,7 +385,12 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 	MLX5_SET64(mtpps_reg, in, time_stamp, time_stamp);
 	MLX5_SET(mtpps_reg, in, field_select, field_select);
 
-	return mlx5_set_mtpps(priv->mdev, in, sizeof(in));
+	err = mlx5_set_mtpps(priv->mdev, in, sizeof(in));
+	if (err)
+		return err;
+
+	return mlx5_set_mtppse(priv->mdev, pin, 0,
+			       MLX5E_EVENT_MODE_REPETETIVE & on);
 }
 
 static int mlx5e_ptp_enable(struct ptp_clock_info *ptp,
@@ -456,22 +474,50 @@ static void mlx5e_get_pps_caps(struct mlx5e_priv *priv,
 	tstamp->ptp_info.n_per_out = MLX5_GET(mtpps_reg, out,
 					      cap_max_num_of_pps_out_pins);
 
-	tstamp->pps_pin_caps[0] = MLX5_GET(mtpps_reg, out, cap_pin_0_mode);
-	tstamp->pps_pin_caps[1] = MLX5_GET(mtpps_reg, out, cap_pin_1_mode);
-	tstamp->pps_pin_caps[2] = MLX5_GET(mtpps_reg, out, cap_pin_2_mode);
-	tstamp->pps_pin_caps[3] = MLX5_GET(mtpps_reg, out, cap_pin_3_mode);
-	tstamp->pps_pin_caps[4] = MLX5_GET(mtpps_reg, out, cap_pin_4_mode);
-	tstamp->pps_pin_caps[5] = MLX5_GET(mtpps_reg, out, cap_pin_5_mode);
-	tstamp->pps_pin_caps[6] = MLX5_GET(mtpps_reg, out, cap_pin_6_mode);
-	tstamp->pps_pin_caps[7] = MLX5_GET(mtpps_reg, out, cap_pin_7_mode);
+	tstamp->pps_info.pin_caps[0] = MLX5_GET(mtpps_reg, out, cap_pin_0_mode);
+	tstamp->pps_info.pin_caps[1] = MLX5_GET(mtpps_reg, out, cap_pin_1_mode);
+	tstamp->pps_info.pin_caps[2] = MLX5_GET(mtpps_reg, out, cap_pin_2_mode);
+	tstamp->pps_info.pin_caps[3] = MLX5_GET(mtpps_reg, out, cap_pin_3_mode);
+	tstamp->pps_info.pin_caps[4] = MLX5_GET(mtpps_reg, out, cap_pin_4_mode);
+	tstamp->pps_info.pin_caps[5] = MLX5_GET(mtpps_reg, out, cap_pin_5_mode);
+	tstamp->pps_info.pin_caps[6] = MLX5_GET(mtpps_reg, out, cap_pin_6_mode);
+	tstamp->pps_info.pin_caps[7] = MLX5_GET(mtpps_reg, out, cap_pin_7_mode);
 }
 
 void mlx5e_pps_event_handler(struct mlx5e_priv *priv,
 			     struct ptp_clock_event *event)
 {
+	struct net_device *netdev = priv->netdev;
 	struct mlx5e_tstamp *tstamp = &priv->tstamp;
+	struct timespec64 ts;
+	u64 nsec_now, nsec_delta;
+	u64 cycles_now, cycles_delta;
+	int pin = event->index;
+	s64 ns;
+	unsigned long flags;
 
-	ptp_clock_event(tstamp->ptp, event);
+	switch (tstamp->ptp_info.pin_config[pin].func) {
+	case PTP_PF_EXTTS:
+		ptp_clock_event(tstamp->ptp, event);
+		break;
+	case PTP_PF_PEROUT:
+		mlx5e_ptp_gettime(&tstamp->ptp_info, &ts);
+		cycles_now = mlx5_read_internal_timer(tstamp->mdev);
+		ts.tv_sec += 1;
+		ts.tv_nsec = 0;
+		ns = timespec64_to_ns(&ts);
+		write_lock_irqsave(&tstamp->lock, flags);
+		nsec_now = timecounter_cyc2time(&tstamp->clock, cycles_now);
+		nsec_delta = ns - nsec_now;
+		cycles_delta = div64_u64(nsec_delta << tstamp->cycles.shift,
+					 tstamp->cycles.mult);
+		tstamp->pps_info.start[pin] = cycles_now + cycles_delta;
+		queue_work(priv->wq, &tstamp->pps_info.out_work);
+		write_unlock_irqrestore(&tstamp->lock, flags);
+		break;
+	default:
+		netdev_err(netdev, "%s: Unhandled event\n", __func__);
+	}
 }
 
 void mlx5e_timestamp_init(struct mlx5e_priv *priv)
@@ -507,6 +553,7 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
 	do_div(ns, NSEC_PER_SEC / 2 / HZ);
 	tstamp->overflow_period = ns;
 
+	INIT_WORK(&tstamp->pps_info.out_work, mlx5e_pps_out);
 	INIT_DELAYED_WORK(&tstamp->overflow_work, mlx5e_timestamp_overflow);
 	if (tstamp->overflow_period)
 		schedule_delayed_work(&tstamp->overflow_work, 0);
@@ -518,16 +565,10 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
 	snprintf(tstamp->ptp_info.name, 16, "mlx5 ptp");
 
 	/* Initialize 1PPS data structures */
-#define MAX_PIN_NUM	8
-	tstamp->pps_pin_caps = kzalloc(sizeof(u8) * MAX_PIN_NUM, GFP_KERNEL);
-	if (tstamp->pps_pin_caps) {
-		if (MLX5_PPS_CAP(priv->mdev))
-			mlx5e_get_pps_caps(priv, tstamp);
-		if (tstamp->ptp_info.n_pins)
-			mlx5e_init_pin_config(tstamp);
-	} else {
-		mlx5_core_warn(priv->mdev, "1PPS initialization failed\n");
-	}
+	if (MLX5_PPS_CAP(priv->mdev))
+		mlx5e_get_pps_caps(priv, tstamp);
+	if (tstamp->ptp_info.n_pins)
+		mlx5e_init_pin_config(tstamp);
 
 	tstamp->ptp = ptp_clock_register(&tstamp->ptp_info,
 					 &priv->mdev->pdev->dev);
@@ -550,7 +591,8 @@ void mlx5e_timestamp_cleanup(struct mlx5e_priv *priv)
 		priv->tstamp.ptp = NULL;
 	}
 
-	kfree(tstamp->pps_pin_caps);
+	cancel_work_sync(&tstamp->pps_info.out_work);
+
 	kfree(tstamp->ptp_info.pin_config);
 
 	cancel_delayed_work_sync(&tstamp->overflow_work);
-- 
cgit v1.2.3


From cf5033089b078303b102b65e3ccbbfa3ce0f4367 Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Sun, 28 May 2017 14:27:02 +0300
Subject: net/mlx5e: Add missing support for PTP_CLK_REQ_PPS request

Add the missing option to enable the PTP_CLK_PPS function.
In this case pin should be configured as 1PPS IN first and
then it will be connected to PPS mechanism.
Events will be reported as PTP_CLOCK_PPSUSR events to relevant sysfs.

Fixes: ee7f12205abc ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_clock.c | 20 ++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  1 -
 3 files changed, 21 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index d42826f0f0d6..0039b4725405 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -271,6 +271,7 @@ struct mlx5e_pps {
 	u8                         pin_caps[MAX_PIN_NUM];
 	struct work_struct         out_work;
 	u64                        start[MAX_PIN_NUM];
+	u8                         enabled;
 };
 
 struct mlx5e_tstamp {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index 464ddd10ebbc..ba355c6b6e1f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -393,6 +393,17 @@ static int mlx5e_perout_configure(struct ptp_clock_info *ptp,
 			       MLX5E_EVENT_MODE_REPETETIVE & on);
 }
 
+static int mlx5e_pps_configure(struct ptp_clock_info *ptp,
+			       struct ptp_clock_request *rq,
+			       int on)
+{
+	struct mlx5e_tstamp *tstamp =
+		container_of(ptp, struct mlx5e_tstamp, ptp_info);
+
+	tstamp->pps_info.enabled = !!on;
+	return 0;
+}
+
 static int mlx5e_ptp_enable(struct ptp_clock_info *ptp,
 			    struct ptp_clock_request *rq,
 			    int on)
@@ -402,6 +413,8 @@ static int mlx5e_ptp_enable(struct ptp_clock_info *ptp,
 		return mlx5e_extts_configure(ptp, rq, on);
 	case PTP_CLK_REQ_PEROUT:
 		return mlx5e_perout_configure(ptp, rq, on);
+	case PTP_CLK_REQ_PPS:
+		return mlx5e_pps_configure(ptp, rq, on);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -447,6 +460,7 @@ static int mlx5e_init_pin_config(struct mlx5e_tstamp *tstamp)
 		return -ENOMEM;
 	tstamp->ptp_info.enable = mlx5e_ptp_enable;
 	tstamp->ptp_info.verify = mlx5e_ptp_verify;
+	tstamp->ptp_info.pps = 1;
 
 	for (i = 0; i < tstamp->ptp_info.n_pins; i++) {
 		snprintf(tstamp->ptp_info.pin_config[i].name,
@@ -498,6 +512,12 @@ void mlx5e_pps_event_handler(struct mlx5e_priv *priv,
 
 	switch (tstamp->ptp_info.pin_config[pin].func) {
 	case PTP_PF_EXTTS:
+		if (tstamp->pps_info.enabled) {
+			event->type = PTP_CLOCK_PPSUSR;
+			event->pps_times.ts_real = ns_to_timespec64(event->timestamp);
+		} else {
+			event->type = PTP_CLOCK_EXTTS;
+		}
 		ptp_clock_event(tstamp->ptp, event);
 		break;
 	case PTP_PF_PEROUT:
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 1eac5003084f..57f31fa478ce 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -377,7 +377,6 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv,
 		break;
 	case MLX5_DEV_EVENT_PPS:
 		eqe = (struct mlx5_eqe *)param;
-		ptp_event.type = PTP_CLOCK_EXTTS;
 		ptp_event.index = eqe->data.pps.pin;
 		ptp_event.timestamp =
 			timecounter_cyc2time(&priv->tstamp.clock,
-- 
cgit v1.2.3


From d439c84509a510e864fdc6166c760482cd03fc57 Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Wed, 12 Jul 2017 17:27:18 +0300
Subject: net/mlx5e: Fix wrong delay calculation for overflow check scheduling

The overflow_period is calculated in seconds. In order to use it
for delayed work scheduling translation to jiffies is needed.

Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_clock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index ba355c6b6e1f..cde8e8e772ec 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -119,7 +119,8 @@ static void mlx5e_timestamp_overflow(struct work_struct *work)
 	write_lock_irqsave(&tstamp->lock, flags);
 	timecounter_read(&tstamp->clock);
 	write_unlock_irqrestore(&tstamp->lock, flags);
-	schedule_delayed_work(&tstamp->overflow_work, tstamp->overflow_period);
+	schedule_delayed_work(&tstamp->overflow_work,
+			      msecs_to_jiffies(tstamp->overflow_period * 1000));
 }
 
 int mlx5e_hwstamp_set(struct mlx5e_priv *priv, struct ifreq *ifr)
-- 
cgit v1.2.3


From f08c39ed0bfb503c7b3e013cd40d036ce6a0941a Mon Sep 17 00:00:00 2001
From: Eugenia Emantayev <eugenia@mellanox.com>
Date: Wed, 12 Jul 2017 17:44:07 +0300
Subject: net/mlx5e: Schedule overflow check work to mlx5e workqueue

This is done in order to ensure that work will not run after the cleanup.

Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_clock.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index cde8e8e772ec..84dd63e74041 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -114,13 +114,14 @@ static void mlx5e_timestamp_overflow(struct work_struct *work)
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct mlx5e_tstamp *tstamp = container_of(dwork, struct mlx5e_tstamp,
 						   overflow_work);
+	struct mlx5e_priv *priv = container_of(tstamp, struct mlx5e_priv, tstamp);
 	unsigned long flags;
 
 	write_lock_irqsave(&tstamp->lock, flags);
 	timecounter_read(&tstamp->clock);
 	write_unlock_irqrestore(&tstamp->lock, flags);
-	schedule_delayed_work(&tstamp->overflow_work,
-			      msecs_to_jiffies(tstamp->overflow_period * 1000));
+	queue_delayed_work(priv->wq, &tstamp->overflow_work,
+			   msecs_to_jiffies(tstamp->overflow_period * 1000));
 }
 
 int mlx5e_hwstamp_set(struct mlx5e_priv *priv, struct ifreq *ifr)
@@ -577,7 +578,7 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
 	INIT_WORK(&tstamp->pps_info.out_work, mlx5e_pps_out);
 	INIT_DELAYED_WORK(&tstamp->overflow_work, mlx5e_timestamp_overflow);
 	if (tstamp->overflow_period)
-		schedule_delayed_work(&tstamp->overflow_work, 0);
+		queue_delayed_work(priv->wq, &tstamp->overflow_work, 0);
 	else
 		mlx5_core_warn(priv->mdev, "invalid overflow period, overflow_work is not scheduled\n");
 
@@ -613,8 +614,6 @@ void mlx5e_timestamp_cleanup(struct mlx5e_priv *priv)
 	}
 
 	cancel_work_sync(&tstamp->pps_info.out_work);
-
-	kfree(tstamp->ptp_info.pin_config);
-
 	cancel_delayed_work_sync(&tstamp->overflow_work);
+	kfree(tstamp->ptp_info.pin_config);
 }
-- 
cgit v1.2.3


From bcec601f30fb41e9233674942fa4040a6e63657a Mon Sep 17 00:00:00 2001
From: Paul Blakey <paulb@mellanox.com>
Date: Thu, 6 Jul 2017 16:40:34 +0300
Subject: net/mlx5: Fix mlx5_add_flow_rules call with correct num of dests

When adding ethtool steering rule with action DISCARD we wrongly
pass a NULL dest with dest_num 1 to mlx5_add_flow_rules().
What this error seems to have caused is sending VPORT 0
(MLX5_FLOW_DESTINATION_TYPE_VPORT) as the fte dest instead of no dests.
We have fte action correctly set to DROP so it might been ignored
anyways.

To reproduce use:
 # sudo ethtool --config-nfc <dev> flow-type ether \
   dst aa:bb:cc:dd:ee:ff action -1

Fixes: 74491de93712 ("net/mlx5: Add multi dest support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
index 22fb993987b4..eafc59280ada 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
@@ -320,7 +320,7 @@ add_ethtool_flow_rule(struct mlx5e_priv *priv,
 
 	spec->match_criteria_enable = (!outer_header_zero(spec->match_criteria));
 	flow_act.flow_tag = MLX5_FS_DEFAULT_FLOW_TAG;
-	rule = mlx5_add_flow_rules(ft, spec, &flow_act, dst, 1);
+	rule = mlx5_add_flow_rules(ft, spec, &flow_act, dst, dst ? 1 : 0);
 	if (IS_ERR(rule)) {
 		err = PTR_ERR(rule);
 		netdev_err(priv->netdev, "%s: failed to add ethtool steering rule: %d\n",
-- 
cgit v1.2.3