From 87121ca504fd1d963a66b3fb0c72054b0fd9a177 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 7 Oct 2011 16:31:46 +0200 Subject: oprofile: Fix crash when unloading module (hr timer mode) Oprofile may crash in a KVM guest while unlaoding modules. This happens if oprofile_arch_init() fails and oprofile switches to the hr timer mode as a fallback. In this case oprofile_arch_exit() is called, but it never was initialized properly which causes the crash. This patch fixes this. oprofile: using timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] unregister_syscore_ops+0x41/0x58 PGD 41da3f067 PUD 41d80e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[] [] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041de1de98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040) Stack: ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [] op_nmi_exit+0x15/0x17 [oprofile] [] oprofile_arch_exit+0xe/0x10 [oprofile] [] oprofile_exit+0x13/0x15 [oprofile] [] sys_delete_module+0x1c3/0x22f [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [] unregister_syscore_ops+0x41/0x58 RSP CR2: 0000000000000008 ---[ end trace 06d4e95b6aa3b437 ]--- CC: stable@kernel.org # 2.6.37+ Signed-off-by: Robert Richter --- drivers/oprofile/oprof.c | 29 ++++++++++++++++++++++++----- drivers/oprofile/timer_int.c | 1 + 2 files changed, 25 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index dccd8636095c..f8c752e408a6 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -239,26 +239,45 @@ int oprofile_set_ulong(unsigned long *addr, unsigned long val) return err; } +static int timer_mode; + static int __init oprofile_init(void) { int err; + /* always init architecture to setup backtrace support */ err = oprofile_arch_init(&oprofile_ops); - if (err < 0 || timer) { - printk(KERN_INFO "oprofile: using timer interrupt.\n"); + + timer_mode = err || timer; /* fall back to timer mode on errors */ + if (timer_mode) { + if (!err) + oprofile_arch_exit(); err = oprofile_timer_init(&oprofile_ops); if (err) return err; } - return oprofilefs_register(); + + err = oprofilefs_register(); + if (!err) + return 0; + + /* failed */ + if (timer_mode) + oprofile_timer_exit(); + else + oprofile_arch_exit(); + + return err; } static void __exit oprofile_exit(void) { - oprofile_timer_exit(); oprofilefs_unregister(); - oprofile_arch_exit(); + if (timer_mode) + oprofile_timer_exit(); + else + oprofile_arch_exit(); } diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c index 3ef44624f510..878fba126582 100644 --- a/drivers/oprofile/timer_int.c +++ b/drivers/oprofile/timer_int.c @@ -110,6 +110,7 @@ int oprofile_timer_init(struct oprofile_operations *ops) ops->start = oprofile_hrtimer_start; ops->stop = oprofile_hrtimer_stop; ops->cpu_type = "timer"; + printk(KERN_INFO "oprofile: using timer interrupt.\n"); return 0; } -- cgit v1.2.3 From c0afabd3d553c521e003779c127143ffde55a16f Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 22 Nov 2011 11:03:14 +0100 Subject: rtc: Disable the alarm in the hardware Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: stable@kernel.org Cc: John Stultz Signed-off-by: Rabin Vincent Signed-off-by: John Stultz --- drivers/rtc/interface.c | 44 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 34 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 3195dbd3ec34..e3cf2f54221f 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -318,6 +318,20 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_read_alarm); +static int ___rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) +{ + int err; + + if (!rtc->ops) + err = -ENODEV; + else if (!rtc->ops->set_alarm) + err = -EINVAL; + else + err = rtc->ops->set_alarm(rtc->dev.parent, alarm); + + return err; +} + static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { struct rtc_time tm; @@ -341,14 +355,7 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) * over right here, before we set the alarm. */ - if (!rtc->ops) - err = -ENODEV; - else if (!rtc->ops->set_alarm) - err = -EINVAL; - else - err = rtc->ops->set_alarm(rtc->dev.parent, alarm); - - return err; + return ___rtc_set_alarm(rtc, alarm); } int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) @@ -762,6 +769,20 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) return 0; } +static void rtc_alarm_disable(struct rtc_device *rtc) +{ + struct rtc_wkalrm alarm; + struct rtc_time tm; + + __rtc_read_time(rtc, &tm); + + alarm.time = rtc_ktime_to_tm(ktime_add(rtc_tm_to_ktime(tm), + ktime_set(300, 0))); + alarm.enabled = 0; + + ___rtc_set_alarm(rtc, &alarm); +} + /** * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue * @rtc rtc device @@ -783,8 +804,10 @@ static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer) struct rtc_wkalrm alarm; int err; next = timerqueue_getnext(&rtc->timerqueue); - if (!next) + if (!next) { + rtc_alarm_disable(rtc); return; + } alarm.time = rtc_ktime_to_tm(next->expires); alarm.enabled = 1; err = __rtc_set_alarm(rtc, &alarm); @@ -846,7 +869,8 @@ again: err = __rtc_set_alarm(rtc, &alarm); if (err == -ETIME) goto again; - } + } else + rtc_alarm_disable(rtc); mutex_unlock(&rtc->ops_lock); } -- cgit v1.2.3 From 6a8943d9ec2567572fca25cf69ad45844d0141a3 Mon Sep 17 00:00:00 2001 From: Arve Hjønnevåg Date: Tue, 22 Nov 2011 18:24:51 -0800 Subject: rtc: Fix some bugs that allowed accumulating time drift in suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current code checks if abs(delta_delta.tv_sec) is greater or equal to two before it discards the old delta value, but this can trigger at close to -1 seconds since -1.000000001 seconds is stored as tv_sec -2 and tv_nsec 999999999 in a normalized timespec. rtc_resume had an early return check if the rtc value had not changed since rtc_suspend. This effectivly stops time for the duration of the short sleep. Check if sleep_time is positive after all the adjustments have been applied instead since this allows the old_system adjustment in rtc_suspend to have an effect even for short sleep cycles. CC: stable@kernel.org Signed-off-by: Arve Hjønnevåg Signed-off-by: John Stultz --- drivers/rtc/class.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 01a7df5317c1..b82a1554cdc1 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -66,7 +66,7 @@ static int rtc_suspend(struct device *dev, pm_message_t mesg) */ delta = timespec_sub(old_system, old_rtc); delta_delta = timespec_sub(delta, old_delta); - if (abs(delta_delta.tv_sec) >= 2) { + if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) { /* * if delta_delta is too large, assume time correction * has occured and set old_delta to the current delta. @@ -100,9 +100,8 @@ static int rtc_resume(struct device *dev) rtc_tm_to_time(&tm, &new_rtc.tv_sec); new_rtc.tv_nsec = 0; - if (new_rtc.tv_sec <= old_rtc.tv_sec) { - if (new_rtc.tv_sec < old_rtc.tv_sec) - pr_debug("%s: time travel!\n", dev_name(&rtc->dev)); + if (new_rtc.tv_sec < old_rtc.tv_sec) { + pr_debug("%s: time travel!\n", dev_name(&rtc->dev)); return 0; } @@ -119,7 +118,8 @@ static int rtc_resume(struct device *dev) sleep_time = timespec_sub(sleep_time, timespec_sub(new_system, old_system)); - timekeeping_inject_sleeptime(&sleep_time); + if (sleep_time.tv_sec >= 0) + timekeeping_inject_sleeptime(&sleep_time); return 0; } -- cgit v1.2.3 From b1807719f6acdf18cc4bde3b5400d05d77801494 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 16 Nov 2011 11:39:52 +0100 Subject: HID: Correct General touch PID Genera Touch told us that 0001 is their single point device and 0003 is the multitouch one. Apparently, we made the tests someone having a prototype, and not the final product. They said it should be safe to do the switch. This partially reverts 5572da0 ("HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'"). Signed-off-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- drivers/hid/hid-ids.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 848a56c0279c..af353842f75f 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1771,8 +1771,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0004) }, { HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30) }, { HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 06ce996b8b65..4a441a6f9967 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -266,7 +266,7 @@ #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc -#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0001 +#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0003 #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 -- cgit v1.2.3 From 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 Mon Sep 17 00:00:00 2001 From: Bart Westgeest Date: Tue, 1 Nov 2011 15:01:28 -0400 Subject: staging: usbip: bugfix for deadlock Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep. If interrupts are not disabled, it can potentially lead to a deadlock. The deadlock is readily reproduceable on a slower (ARM based) device such as the TI Pandaboard. Signed-off-by: Bart Westgeest Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_rx.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 09c44abb89e8..3872b8cccdcf 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -68,6 +68,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, { struct usbip_device *ud = &vdev->ud; struct urb *urb; + unsigned long flags; spin_lock(&vdev->priv_lock); urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum); @@ -101,9 +102,9 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, usbip_dbg_vhci_rx("now giveback urb %p\n", urb); - spin_lock(&the_controller->lock); + spin_lock_irqsave(&the_controller->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock(&the_controller->lock); + spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); @@ -141,6 +142,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, { struct vhci_unlink *unlink; struct urb *urb; + unsigned long flags; usbip_dump_header(pdu); @@ -170,9 +172,9 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, urb->status = pdu->u.ret_unlink.status; pr_info("urb->status %d\n", urb->status); - spin_lock(&the_controller->lock); + spin_lock_irqsave(&the_controller->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock(&the_controller->lock); + spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); -- cgit v1.2.3 From f7364ba04b0961f3a1f978bbe77102606801e35f Mon Sep 17 00:00:00 2001 From: wwang Date: Mon, 31 Oct 2011 15:02:53 +0800 Subject: staging:rts_pstor:Complete scanning_done variable Complete scanning_done variable if rtsx-scan thread created failed. Signed-off-by: wwang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rts_pstor/rtsx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index 480b0ed2e4de..115635f95024 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -1021,6 +1021,7 @@ static int __devinit rtsx_probe(struct pci_dev *pci, th = kthread_create(rtsx_scan_thread, dev, "rtsx-scan"); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start the device-scanning thread\n"); + complete(&dev->scanning_done); quiesce_and_remove_host(dev); err = PTR_ERR(th); goto errout; -- cgit v1.2.3 From 8b78607fc4a26c2e26c4a614ff0bbd3380abc402 Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Tue, 8 Nov 2011 21:21:37 +0000 Subject: staging: comedi: usbduxsigma: Fixed wrong range for the analogue channel. It's actually +/-2.65V/2 and not +/-2.65V. Signed-off-by: Bernd Porr Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxsigma.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index a8fea9a91733..6144afb8cbaa 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.6" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com" /* @@ -25,7 +25,7 @@ Driver: usbduxsigma Description: University of Stirling USB DAQ & INCITE Technology Limited Devices: [ITL] USB-DUX (usbduxsigma.o) Author: Bernd Porr -Updated: 21 Jul 2011 +Updated: 8 Nov 2011 Status: testing */ /* @@ -44,6 +44,7 @@ Status: testing * 0.3: proper vendor ID and driver name * 0.4: fixed D/A voltage range * 0.5: various bug fixes, health check at startup + * 0.6: corrected wrong input range */ /* generates loads of debug info */ @@ -175,7 +176,7 @@ Status: testing /* comedi constants */ static const struct comedi_lrange range_usbdux_ai_range = { 1, { BIP_RANGE - (2.65) + (2.65/2.0) } }; -- cgit v1.2.3 From 3ffab428f40849ed5f21bcfd7285bdef7902f9ca Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Tue, 8 Nov 2011 21:23:03 +0000 Subject: staging: comedi: fix oops for USB DAQ devices. This fixes kernel oops when an USB DAQ device is plugged out while it's communicating with the userspace software. Signed-off-by: Bernd Porr Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 71 +++++++++++++++++++++++++++--------- 1 file changed, 53 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 21d8c1c16cd8..156622a6f162 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1452,9 +1452,6 @@ static struct vm_operations_struct comedi_vm_ops = { static int comedi_mmap(struct file *file, struct vm_area_struct *vma) { const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_async *async = NULL; unsigned long start = vma->vm_start; unsigned long size; @@ -1462,6 +1459,15 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma) int i; int retval; struct comedi_subdevice *s; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + + dev_file_info = comedi_get_device_file_info(minor); + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); if (!dev->attached) { @@ -1528,11 +1534,17 @@ static unsigned int comedi_poll(struct file *file, poll_table * wait) { unsigned int mask = 0; const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_subdevice *read_subdev; struct comedi_subdevice *write_subdev; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); if (!dev->attached) { @@ -1578,9 +1590,15 @@ static ssize_t comedi_write(struct file *file, const char __user *buf, int n, m, count = 0, retval = 0; DECLARE_WAITQUEUE(wait, current); const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; if (!dev->attached) { DPRINTK("no driver configured on comedi%i\n", dev->minor); @@ -1683,9 +1701,15 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes, int n, m, count = 0, retval = 0; DECLARE_WAITQUEUE(wait, current); const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; if (!dev->attached) { DPRINTK("no driver configured on comedi%i\n", dev->minor); @@ -1885,11 +1909,17 @@ ok: static int comedi_close(struct inode *inode, struct file *file) { const unsigned minor = iminor(inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_subdevice *s = NULL; int i; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); @@ -1923,10 +1953,15 @@ static int comedi_close(struct inode *inode, struct file *file) static int comedi_fasync(int fd, struct file *file, int on) { const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; return fasync_helper(fd, file, on, &dev->async_queue); } -- cgit v1.2.3 From df30b21cb0eed5ba8a8e0cdfeebc66ba8cde821d Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Sat, 29 Oct 2011 09:45:39 +0200 Subject: Staging: comedi: fix mmap_count In comedi_fops, mmap_count is decremented at comedi_vm_ops->close but it is not incremented at comedi_vm_ops->open. This may result in a negative counter. The patch introduces the open method to keep the counter consistent. The bug was triggerd by this sample code: mmap(0, ...., comedi_fd); fork(); exit(0); Acked-by: Alessandro Rubini Signed-off-by: Federico Vaga Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 156622a6f162..88caa7376999 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1432,7 +1432,21 @@ static int do_cancel(struct comedi_device *dev, struct comedi_subdevice *s) return ret; } -static void comedi_unmap(struct vm_area_struct *area) + +static void comedi_vm_open(struct vm_area_struct *area) +{ + struct comedi_async *async; + struct comedi_device *dev; + + async = area->vm_private_data; + dev = async->subdevice->device; + + mutex_lock(&dev->mutex); + async->mmap_count++; + mutex_unlock(&dev->mutex); +} + +static void comedi_vm_close(struct vm_area_struct *area) { struct comedi_async *async; struct comedi_device *dev; @@ -1446,7 +1460,8 @@ static void comedi_unmap(struct vm_area_struct *area) } static struct vm_operations_struct comedi_vm_ops = { - .close = comedi_unmap, + .open = comedi_vm_open, + .close = comedi_vm_close, }; static int comedi_mmap(struct file *file, struct vm_area_struct *vma) -- cgit v1.2.3 From 6a9ce6b654e491981f6ef7e214cbd4f63e033848 Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Sat, 29 Oct 2011 09:47:39 +0200 Subject: Staging: comedi: fix signal handling in read and write After sleeping on a wait queue, signal_pending(current) should be checked (not before sleeping). Acked-by: Alessandro Rubini Signed-off-by: Federico Vaga Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 88caa7376999..ebdcecda3583 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1673,11 +1673,11 @@ static ssize_t comedi_write(struct file *file, const char __user *buf, retval = -EAGAIN; break; } + schedule(); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } - schedule(); if (!s->busy) break; if (s->busy != file) { @@ -1780,11 +1780,11 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes, retval = -EAGAIN; break; } + schedule(); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } - schedule(); if (!s->busy) { retval = 0; break; -- cgit v1.2.3 From e384a41141949843899affcf51f4e6e646c1fe9f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:20:43 +0300 Subject: Staging: comedi: integer overflow in do_insnlist_ioctl() There is an integer overflow here that could cause memory corruption on 32 bit systems. insnlist.n_insns could be a very high value size calculation for kmalloc() could overflow resulting in a smaller "insns" than expected. In the for (i = 0; i < insnlist.n_insns; i++) {... loop we would read past the end of the buffer, possibly corrupting memory as well. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ebdcecda3583..ed4853f194c4 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -670,6 +670,11 @@ static int do_insnlist_ioctl(struct comedi_device *dev, goto error; } + if (sizeof(struct comedi_insn) * insnlist.n_insns < insnlist.n_insns) { + ret = -EINVAL; + goto error; + } + insns = kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); if (!insns) { -- cgit v1.2.3 From 46b1848360c8e634e0b063932a1261062fa0f7d6 Mon Sep 17 00:00:00 2001 From: Dirk Nehring Date: Thu, 24 Nov 2011 19:22:23 +0100 Subject: usb: option: add Huawei E353 controlling interfaces This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d865878c9f97..6e09857c32eb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -661,6 +661,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, -- cgit v1.2.3 From ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 Mon Sep 17 00:00:00 2001 From: Veli-Pekka Peltola Date: Thu, 24 Nov 2011 22:08:56 +0200 Subject: usb: option: add SIMCom SIM5218 Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e09857c32eb..e3426602dc82 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -750,6 +750,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, -- cgit v1.2.3 From cec28a5428793b6bc64e56687fb239759d6da74e Mon Sep 17 00:00:00 2001 From: Qinglin Ye Date: Wed, 23 Nov 2011 23:39:32 +0800 Subject: USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 3041a974faf3..24caba79d722 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1854,6 +1854,13 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Qinglin Ye */ +UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100, + "Kingston", + "DT 101 G2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG ), + /* Reported by Francesco Foresti */ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, "Super Top", -- cgit v1.2.3 From 8746c83d538cab273d335acb2be226d096f4a5af Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Nov 2011 10:28:31 +0300 Subject: USB: whci-hcd: fix endian conversion in qset_clear() qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/whci/qset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index d6e175428618..a403b53e86b9 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -124,7 +124,7 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) { qset->td_start = qset->td_end = qset->ntds = 0; - qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); + qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; qset->qh.scratch[0] = 0; -- cgit v1.2.3 From 06b446c8af5db5a98b2eaa30b513c79089ed254b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 28 Nov 2011 04:34:34 +0900 Subject: Revert "Staging: comedi: integer overflow in do_insnlist_ioctl()" This reverts commit e384a41141949843899affcf51f4e6e646c1fe9f. It's not the correct way to solve this issue. Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ed4853f194c4..ebdcecda3583 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -670,11 +670,6 @@ static int do_insnlist_ioctl(struct comedi_device *dev, goto error; } - if (sizeof(struct comedi_insn) * insnlist.n_insns < insnlist.n_insns) { - ret = -EINVAL; - goto error; - } - insns = kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); if (!insns) { -- cgit v1.2.3 From dfd8ee92a9192d78aa38cf8699df3630a7c88c85 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 25 Nov 2011 16:46:51 -0500 Subject: Staging: comedi: fix integer overflow in do_insnlist_ioctl() There is a potential integer overflow in do_insnlist_ioctl() if userspace passes in a large insnlist.n_insns. The call to kmalloc() would allocate a small buffer, leading to a memory corruption. The bug was reported by Dan Carpenter and Haogang Chen . The patch was suggested by Ian Abbott and Lars-Peter Clausen . Reported-by: Dan Carpenter Reported-by: Haogang Chen . Cc: Ian Abbott Cc: Lars-Peter Clausen Signed-off-by: Xi Wang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ebdcecda3583..5e78c77d5a08 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -671,7 +671,7 @@ static int do_insnlist_ioctl(struct comedi_device *dev, } insns = - kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); + kcalloc(insnlist.n_insns, sizeof(struct comedi_insn), GFP_KERNEL); if (!insns) { DPRINTK("kmalloc failed\n"); ret = -ENOMEM; -- cgit v1.2.3 From df711fc9962b9491af2b92bd0d21ecbfefe4e5fa Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Thu, 17 Nov 2011 13:07:44 +0800 Subject: xHCI: reset-on-resume quirk for NEC uPD720200 Julian Sikorski reports NEC uPD720200 does not work stable after suspend and resume. Re-initialize the host in xhci_resume(). This should be backported to stable kernels as old as 2.6.37. The kernel will need to include commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host" for this patch to work. Signed-off-by: Andiry Xu Reported-by: Julian Sikorski Tested-by: Julian Sikorski Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38626fb..d2a7332daca4 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -33,6 +33,8 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 +#define PCI_DEVICE_ID_NEC_uPD720200 0x0194 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -74,8 +76,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->revision); } - if (pdev->vendor == PCI_VENDOR_ID_NEC) + if (pdev->vendor == PCI_VENDOR_ID_NEC) { xhci->quirks |= XHCI_NEC_HOST; + if (pdev->device == PCI_DEVICE_ID_NEC_uPD720200) + xhci->quirks |= XHCI_RESET_ON_RESUME; + } if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; -- cgit v1.2.3 From e3420901eba65b1c46bed86d360e3a8685d20734 Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Mon, 28 Nov 2011 11:30:22 +0100 Subject: EHCI : Fix a regression in the ISO scheduler Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom Signed-off-by: Matthieu CASTET Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 56a32033adb3..a60679cbbf85 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1475,6 +1475,7 @@ iso_stream_schedule ( * jump until after the queue is primed. */ else { + int done = 0; start = SCHEDULE_SLOP + (now & ~0x07); /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ @@ -1492,18 +1493,18 @@ iso_stream_schedule ( if (stream->highspeed) { if (itd_slot_ok(ehci, mod, start, stream->usecs, period)) - break; + done = 1; } else { if ((start % 8) >= 6) continue; if (sitd_slot_ok(ehci, mod, stream, start, sched, period)) - break; + done = 1; } - } while (start > next); + } while (start > next && !done); /* no room in the schedule */ - if (start == next) { + if (!done) { ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n", urb, now, now + mod); status = -ENOSPC; -- cgit v1.2.3 From 4f718a29fe4908c2cea782f751e9805319684e2b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:14 +0100 Subject: firmware: Sigma: Prevent out of bounds memory access The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org --- drivers/firmware/sigma.c | 76 +++++++++++++++++++++++++++++++++++------------- include/linux/sigma.h | 5 ---- 2 files changed, 55 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index f10fc521951b..c780baa59ed9 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -14,13 +14,34 @@ #include #include -/* Return: 0==OK, <0==error, =1 ==no more actions */ +static size_t sigma_action_size(struct sigma_action *sa) +{ + size_t payload = 0; + + switch (sa->instr) { + case SIGMA_ACTION_WRITEXBYTES: + case SIGMA_ACTION_WRITESINGLE: + case SIGMA_ACTION_WRITESAFELOAD: + payload = sigma_action_len(sa); + break; + default: + break; + } + + payload = ALIGN(payload, 2); + + return payload + sizeof(struct sigma_action); +} + +/* + * Returns a negative error value in case of an error, 0 if processing of + * the firmware should be stopped after this action, 1 otherwise. + */ static int -process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw) +process_sigma_action(struct i2c_client *client, struct sigma_action *sa) { - struct sigma_action *sa = (void *)(ssfw->fw->data + ssfw->pos); size_t len = sigma_action_len(sa); - int ret = 0; + int ret; pr_debug("%s: instr:%i addr:%#x len:%zu\n", __func__, sa->instr, sa->addr, len); @@ -29,44 +50,50 @@ process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw) case SIGMA_ACTION_WRITEXBYTES: case SIGMA_ACTION_WRITESINGLE: case SIGMA_ACTION_WRITESAFELOAD: - if (ssfw->fw->size < ssfw->pos + len) - return -EINVAL; ret = i2c_master_send(client, (void *)&sa->addr, len); if (ret < 0) return -EINVAL; break; - case SIGMA_ACTION_DELAY: - ret = 0; udelay(len); len = 0; break; - case SIGMA_ACTION_END: - return 1; - + return 0; default: return -EINVAL; } - /* when arrive here ret=0 or sent data */ - ssfw->pos += sigma_action_size(sa, len); - return ssfw->pos == ssfw->fw->size; + return 1; } static int process_sigma_actions(struct i2c_client *client, struct sigma_firmware *ssfw) { - pr_debug("%s: processing %p\n", __func__, ssfw); + struct sigma_action *sa; + size_t size; + int ret; + + while (ssfw->pos + sizeof(*sa) <= ssfw->fw->size) { + sa = (struct sigma_action *)(ssfw->fw->data + ssfw->pos); + + size = sigma_action_size(sa); + ssfw->pos += size; + if (ssfw->pos > ssfw->fw->size || size == 0) + break; + + ret = process_sigma_action(client, sa); - while (1) { - int ret = process_sigma_action(client, ssfw); pr_debug("%s: action returned %i\n", __func__, ret); - if (ret == 1) - return 0; - else if (ret) + + if (ret <= 0) return ret; } + + if (ssfw->pos != ssfw->fw->size) + return -EINVAL; + + return 0; } int process_sigma_firmware(struct i2c_client *client, const char *name) @@ -89,7 +116,14 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) /* then verify the header */ ret = -EINVAL; - if (fw->size < sizeof(*ssfw_head)) + + /* + * Reject too small or unreasonable large files. The upper limit has been + * chosen a bit arbitrarily, but it should be enough for all practical + * purposes and having the limit makes it easier to avoid integer + * overflows later in the loading process. + */ + if (fw->size < sizeof(*ssfw_head) || fw->size >= 0x4000000) goto done; ssfw_head = (void *)fw->data; diff --git a/include/linux/sigma.h b/include/linux/sigma.h index e2accb3164d8..9a138c2946bb 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -50,11 +50,6 @@ static inline u32 sigma_action_len(struct sigma_action *sa) return (sa->len_hi << 16) | sa->len; } -static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len) -{ - return sizeof(*sa) + payload_len + (payload_len % 2); -} - extern int process_sigma_firmware(struct i2c_client *client, const char *name); #endif -- cgit v1.2.3 From c56935bdc0a8edf50237d3b0205133a5b0adc604 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:15 +0100 Subject: firmware: Sigma: Skip header during CRC generation The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org --- drivers/firmware/sigma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index c780baa59ed9..36265de0a9e8 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -130,7 +130,8 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) if (memcmp(ssfw_head->magic, SIGMA_MAGIC, ARRAY_SIZE(ssfw_head->magic))) goto done; - crc = crc32(0, fw->data, fw->size); + crc = crc32(0, fw->data + sizeof(*ssfw_head), + fw->size - sizeof(*ssfw_head)); pr_debug("%s: crc=%x\n", __func__, crc); if (crc != ssfw_head->crc) goto done; -- cgit v1.2.3 From bda63586bc5929e97288cdb371bb6456504867ed Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:16 +0100 Subject: firmware: Sigma: Fix endianess issues Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org --- drivers/firmware/sigma.c | 2 +- include/linux/sigma.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index 36265de0a9e8..1eedb6f7fdab 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -133,7 +133,7 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) crc = crc32(0, fw->data + sizeof(*ssfw_head), fw->size - sizeof(*ssfw_head)); pr_debug("%s: crc=%x\n", __func__, crc); - if (crc != ssfw_head->crc) + if (crc != le32_to_cpu(ssfw_head->crc)) goto done; ssfw.pos = sizeof(*ssfw_head); diff --git a/include/linux/sigma.h b/include/linux/sigma.h index 9a138c2946bb..d0de882c0d96 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -24,7 +24,7 @@ struct sigma_firmware { struct sigma_firmware_header { unsigned char magic[7]; u8 version; - u32 crc; + __le32 crc; }; enum { @@ -40,14 +40,14 @@ enum { struct sigma_action { u8 instr; u8 len_hi; - u16 len; - u16 addr; + __le16 len; + __be16 addr; unsigned char payload[]; }; static inline u32 sigma_action_len(struct sigma_action *sa) { - return (sa->len_hi << 16) | sa->len; + return (sa->len_hi << 16) | le16_to_cpu(sa->len); } extern int process_sigma_firmware(struct i2c_client *client, const char *name); -- cgit v1.2.3 From 5d193ce8f1fa7c67c7fd7be2c03ef31eed344a4f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 22 Nov 2011 17:18:24 -0800 Subject: usb: musb: PM: fix context save/restore in suspend/resume path Currently the driver tries to save context in the suspend path, but will cause an abort if the device is already runtime suspended. This happens, for example, if MUSB loaded/compiled-in, in host mode, but no USB devices are attached. MUSB will be runtime suspended, but then attempting a system suspend will crash due to the context save being attempted while the device is disabled. On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be called late in the suspend path (by the PM domain layer) if the driver is not already runtime suspended, ensuring a full shutdown. Therefore, the context save is not needed in the ->suspend() method since it will be called in the ->runtime_suspend() method anyways (similarily for resume.) NOTE: this leaves the suspend/resume methods basically empty (with some FIXMEs and comments, but I'll leave it to the maintainers to decide whether to remove them. Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c1fa12ec7a9a..b63ab1570103 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2301,18 +2301,12 @@ static int musb_suspend(struct device *dev) */ } - musb_save_context(musb); - spin_unlock_irqrestore(&musb->lock, flags); return 0; } static int musb_resume_noirq(struct device *dev) { - struct musb *musb = dev_to_musb(dev); - - musb_restore_context(musb); - /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB * module got reset through the PSC (vs just being disabled). -- cgit v1.2.3 From f8eff0a06116aee127152674e9ea9c51aecf6b69 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:06 -0800 Subject: usb: renesas_usbhs: fixup device_register timing current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But bind() function will fail if it was called before device_register() (or device_add()). This patch modifies this issue. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 37 ++++++++++------------------------ 1 file changed, 11 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index d9717e0bc1ff..ef82274ce70b 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -751,53 +751,31 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); - struct usbhs_priv *priv; - struct device *dev; - int ret; + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); if (!driver || !driver->setup || driver->speed != USB_SPEED_HIGH) return -EINVAL; - dev = usbhsg_gpriv_to_dev(gpriv); - priv = usbhsg_gpriv_to_priv(gpriv); - /* first hook up the driver ... */ gpriv->driver = driver; gpriv->gadget.dev.driver = &driver->driver; - ret = device_add(&gpriv->gadget.dev); - if (ret) { - dev_err(dev, "device_add error %d\n", ret); - goto add_fail; - } - return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); - -add_fail: - gpriv->driver = NULL; - gpriv->gadget.dev.driver = NULL; - - return ret; } static int usbhsg_gadget_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); - struct usbhs_priv *priv; - struct device *dev; + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); if (!driver || !driver->unbind) return -EINVAL; - dev = usbhsg_gpriv_to_dev(gpriv); - priv = usbhsg_gpriv_to_priv(gpriv); - usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); - device_del(&gpriv->gadget.dev); gpriv->driver = NULL; return 0; @@ -876,12 +854,14 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) /* * init gadget */ - device_initialize(&gpriv->gadget.dev); dev_set_name(&gpriv->gadget.dev, "gadget"); gpriv->gadget.dev.parent = dev; gpriv->gadget.name = "renesas_usbhs_udc"; gpriv->gadget.ops = &usbhsg_gadget_ops; gpriv->gadget.is_dualspeed = 1; + ret = device_register(&gpriv->gadget.dev); + if (ret < 0) + goto err_add_udc; INIT_LIST_HEAD(&gpriv->gadget.ep_list); @@ -912,12 +892,15 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) ret = usb_add_gadget_udc(dev, &gpriv->gadget); if (ret) - goto err_add_udc; + goto err_register; dev_info(dev, "gadget probed\n"); return 0; + +err_register: + device_unregister(&gpriv->gadget.dev); err_add_udc: kfree(gpriv->uep); @@ -933,6 +916,8 @@ void usbhs_mod_gadget_remove(struct usbhs_priv *priv) usb_del_gadget_udc(&gpriv->gadget); + device_unregister(&gpriv->gadget.dev); + usbhsg_controller_unregister(gpriv); kfree(gpriv->uep); -- cgit v1.2.3 From 8885a897c26b2f63e1bbb6fa7bd9da3a73a09113 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:38 -0800 Subject: usb: renesas_usbhs: fixup signal the driver that cable was disconnected current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). cable disconnected signal was needed. This patch fixup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index ef82274ce70b..f4b032ed326a 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -805,6 +805,13 @@ static int usbhsg_start(struct usbhs_priv *priv) static int usbhsg_stop(struct usbhs_priv *priv) { + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + + /* cable disconnect */ + if (gpriv->driver && + gpriv->driver->disconnect) + gpriv->driver->disconnect(&gpriv->gadget); + return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } -- cgit v1.2.3 From 0cdd7d4b66aa740ce62aeeaf7fbd495130c2864f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:56 -0800 Subject: usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop. current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But current renesas_usbhs driver didn't care about gadget.dev.driver when udc_stop. it cause rmmod oops. This patch care it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index f4b032ed326a..2be73817e47f 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -776,6 +776,7 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget, return -EINVAL; usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); + gpriv->gadget.dev.driver = NULL; gpriv->driver = NULL; return 0; -- cgit v1.2.3 From 89f829a50f7d0d0f3a15c482a7a65dd0b133a5f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:20:44 -0800 Subject: usb: renesas_usbhs: fixup driver speed This patch cares latest USB_SPEED_SUPER support. renesas_usbhs can not use super-speed, but can use full/high speed. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 2be73817e47f..7f4e80338570 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -755,7 +755,7 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, if (!driver || !driver->setup || - driver->speed != USB_SPEED_HIGH) + driver->speed < USB_SPEED_FULL) return -EINVAL; /* first hook up the driver ... */ -- cgit v1.2.3 From fef6964452abae55c82e1615ac505b8377df00e9 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 18 Nov 2011 20:16:27 +0100 Subject: usb: gadget: fix g_serial regression Commit "usb: gadget: use config_ep_by_speed() instead of ep_choose()" broke g_serial in "non ACM nor OBEX" mode. Apply a trivial fix on usb endpoints discovery. Signed-off-by: Robert Jarzmik Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_serial.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c index 91fdf790ed20..cf33a8d0fd5d 100644 --- a/drivers/usb/gadget/f_serial.c +++ b/drivers/usb/gadget/f_serial.c @@ -131,8 +131,8 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } if (!gser->port.in->desc || !gser->port.out->desc) { DBG(cdev, "activate generic ttyGS%d\n", gser->port_num); - if (!config_ep_by_speed(cdev->gadget, f, gser->port.in) || - !config_ep_by_speed(cdev->gadget, f, gser->port.out)) { + if (config_ep_by_speed(cdev->gadget, f, gser->port.in) || + config_ep_by_speed(cdev->gadget, f, gser->port.out)) { gser->port.in->desc = NULL; gser->port.out->desc = NULL; return -EINVAL; -- cgit v1.2.3 From bfe0658b402dab3d6fbef4b7bd81a46d0e68eb86 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Sat, 19 Nov 2011 18:26:25 +0100 Subject: usb: udc: Fix gadget driver's speed check in various UDC drivers Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz Reported-by: Alan Stern Tested-by: Heiko Stuebner Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/amd5536udc.c | 2 +- drivers/usb/gadget/fsl_qe_udc.c | 3 +-- drivers/usb/gadget/fsl_udc_core.c | 3 +-- drivers/usb/gadget/m66592-udc.c | 2 +- drivers/usb/gadget/net2280.c | 2 +- drivers/usb/gadget/r8a66597-udc.c | 2 +- drivers/usb/gadget/s3c-hsotg.c | 4 +--- drivers/usb/gadget/s3c-hsudc.c | 3 +-- drivers/usb/musb/musb_gadget.c | 2 +- 9 files changed, 9 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 4730016d7cd4..45f422ac103f 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1959,7 +1959,7 @@ static int amd5536_start(struct usb_gadget_driver *driver, u32 tmp; if (!driver || !bind || !driver->setup - || driver->speed != USB_SPEED_HIGH) + || driver->speed < USB_SPEED_HIGH) return -EINVAL; if (!dev) return -ENODEV; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 2a03e4de11c1..e00cf92409ce 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2336,8 +2336,7 @@ static int fsl_qe_start(struct usb_gadget_driver *driver, if (!udc_controller) return -ENODEV; - if (!driver || (driver->speed != USB_SPEED_FULL - && driver->speed != USB_SPEED_HIGH) + if (!driver || driver->speed < USB_SPEED_FULL || !bind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b3b3d83b7c33..1482b12db81d 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1938,8 +1938,7 @@ static int fsl_start(struct usb_gadget_driver *driver, if (!udc_controller) return -ENODEV; - if (!driver || (driver->speed != USB_SPEED_FULL - && driver->speed != USB_SPEED_HIGH) + if (!driver || driver->speed < USB_SPEED_FULL || !bind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 91d0af2a24a8..9aa1cbbee45b 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1472,7 +1472,7 @@ static int m66592_start(struct usb_gadget_driver *driver, int retval; if (!driver - || driver->speed != USB_SPEED_HIGH + || driver->speed < USB_SPEED_HIGH || !bind || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 7f1bc9a73cda..da2b9d0be3ca 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1881,7 +1881,7 @@ static int net2280_start(struct usb_gadget *_gadget, * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) * "must not be used in normal operation" */ - if (!driver || driver->speed != USB_SPEED_HIGH + if (!driver || driver->speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 24f84b210ce1..fc719a3f8557 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1746,7 +1746,7 @@ static int r8a66597_start(struct usb_gadget *gadget, struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); if (!driver - || driver->speed != USB_SPEED_HIGH + || driver->speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; if (!r8a66597) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index a552453dc946..b31448229f0b 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2586,10 +2586,8 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, return -EINVAL; } - if (driver->speed != USB_SPEED_HIGH && - driver->speed != USB_SPEED_FULL) { + if (driver->speed < USB_SPEED_FULL) dev_err(hsotg->dev, "%s: bad speed\n", __func__); - } if (!bind || !driver->setup) { dev_err(hsotg->dev, "%s: missing entry points\n", __func__); diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 8d54f893cefe..20a553b46aed 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1142,8 +1142,7 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, int ret; if (!driver - || (driver->speed != USB_SPEED_FULL && - driver->speed != USB_SPEED_HIGH) + || driver->speed < USB_SPEED_FULL || !bind || !driver->unbind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d51043acfe1a..922148ff8d29 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1903,7 +1903,7 @@ static int musb_gadget_start(struct usb_gadget *g, unsigned long flags; int retval = -EINVAL; - if (driver->speed != USB_SPEED_HIGH) + if (driver->speed < USB_SPEED_HIGH) goto err0; pm_runtime_get_sync(musb->controller); -- cgit v1.2.3 From 7c91d908f5af027ed14b3d103331f91f386c1043 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 22 Nov 2011 09:55:45 +0800 Subject: USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFER Some ISO gadgets, like audio, has SYNC attribute as well as USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge ISO XFER. Signed-off-by: Peter Chen Acked-by: Michal Nazarewicz Acked-by: Li Yang Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_udc_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 1482b12db81d..bf1cd6e55ed9 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -877,7 +877,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) VDBG("%s, bad ep", __func__); return -EINVAL; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (usb_endpoint_xfer_isoc(ep->desc)) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -1032,7 +1032,7 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value) goto out; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (usb_endpoint_xfer_isoc(ep->desc)) { status = -EOPNOTSUPP; goto out; } -- cgit v1.2.3 From 65cd5c4d03563f7118c2e83b7a50928e461cbc1e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Nov 2011 13:48:28 -0200 Subject: usb: fsl_mxc_udc.c: Fix build issue by including missing header file Fix the following build error: CC [M] drivers/usb/gadget/fsl_mxc_udc.o drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize': drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl' drivers/usb/gadget/fsl_mxc_udc.c:100: error: implicit declaration of function 'writel' This error is caused by the follwing commit: (16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h) ,which removed '#include ' from mx31.h. fsl_mxc_udc.c includes , which in turns includes mx31.h, so that's the reason fsl_mxc_udc.c built fine previously. Instead of relying on the indirect inclusion of the linux/io.h header file, include it directly in fsl_mxc_udc.c. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_mxc_udc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 43a49ecc1f36..23eaecfa3ed3 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -16,6 +16,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From 5ce1d0eb1cd1071347618d0a95515f300239d201 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Nov 2011 13:48:29 -0200 Subject: usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC type In order to support multiple SoC kernel image, compile-time dependency on a specific SoC type should be avoided. fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove the compile-time check for CONFIG_SOC_IMX35. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_mxc_udc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 23eaecfa3ed3..dcbc0a2e48dd 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -89,7 +89,6 @@ eenahb: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -#if defined(CONFIG_SOC_IMX35) if (cpu_is_mx35()) { unsigned int v; @@ -102,7 +101,6 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) USBPHYCTRL_OTGBASE_OFFSET)); } } -#endif /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { -- cgit v1.2.3 From 6414e94c203d92b163ca61b5f51a25b80a621dbe Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 23 Nov 2011 20:12:56 +0800 Subject: usb: gadget: fsl_udc: fix dequeuing a request in progress The original implementation of dequeuing a request in progress is not correct. Change to use a correct process and also clean up the related functions a little bit. Signed-off-by: Li Yang Acked-by: Peter Chen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_udc_core.c | 68 ++++++++++++++++++--------------------- drivers/usb/gadget/fsl_usb2_udc.h | 10 ++++++ 2 files changed, 42 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index bf1cd6e55ed9..dd28ef3def71 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -696,12 +696,31 @@ static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) kfree(req); } -/*-------------------------------------------------------------------------*/ +/* Actually add a dTD chain to an empty dQH and let go */ +static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td) +{ + struct ep_queue_head *qh = get_qh_by_ep(ep); + + /* Write dQH next pointer and terminate bit to 0 */ + qh->next_dtd_ptr = cpu_to_hc32(td->td_dma + & EP_QUEUE_HEAD_NEXT_POINTER_MASK); + + /* Clear active and halt bit */ + qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE + | EP_QUEUE_HEAD_STATUS_HALT)); + + /* Ensure that updates to the QH will occur before priming. */ + wmb(); + + /* Prime endpoint by writing correct bit to ENDPTPRIME */ + fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))), &dr_regs->endpointprime); +} + +/* Add dTD chain to the dQH of an EP */ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) { - int i = ep_index(ep) * 2 + ep_is_in(ep); u32 temp, bitmask, tmp_stat; - struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ @@ -719,7 +738,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); /* Read prime bit, if 1 goto done */ if (fsl_readl(&dr_regs->endpointprime) & bitmask) - goto out; + return; do { /* Set ATDTW bit in USBCMD */ @@ -736,28 +755,10 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); if (tmp_stat) - goto out; + return; } - /* Write dQH next pointer and terminate bit to 0 */ - temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; - dQH->next_dtd_ptr = cpu_to_hc32(temp); - - /* Clear active and halt bit */ - temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE - | EP_QUEUE_HEAD_STATUS_HALT)); - dQH->size_ioc_int_sts &= temp; - - /* Ensure that updates to the QH will occur before priming. */ - wmb(); - - /* Prime endpoint by writing 1 to ENDPTPRIME */ - temp = ep_is_in(ep) - ? (1 << (ep_index(ep) + 16)) - : (1 << (ep_index(ep))); - fsl_writel(temp, &dr_regs->endpointprime); -out: - return; + fsl_prime_ep(ep, req->head); } /* Fill in the dTD structure @@ -973,25 +974,20 @@ static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) /* The request isn't the last request in this ep queue */ if (req->queue.next != &ep->queue) { - struct ep_queue_head *qh; struct fsl_req *next_req; - qh = ep->qh; next_req = list_entry(req->queue.next, struct fsl_req, queue); - /* Point the QH to the first TD of next request */ - fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); + /* prime with dTD of next request */ + fsl_prime_ep(ep, next_req->head); } - - /* The request hasn't been processed, patch up the TD chain */ + /* The request hasn't been processed, patch up the TD chain */ } else { struct fsl_req *prev_req; prev_req = list_entry(req->queue.prev, struct fsl_req, queue); - fsl_writel(fsl_readl(&req->tail->next_td_ptr), - &prev_req->tail->next_td_ptr); - + prev_req->tail->next_td_ptr = req->tail->next_td_ptr; } done(ep, req, -ECONNRESET); @@ -1068,7 +1064,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) struct fsl_udc *udc; int size = 0; u32 bitmask; - struct ep_queue_head *d_qh; + struct ep_queue_head *qh; ep = container_of(_ep, struct fsl_ep, ep); if (!_ep || (!ep->desc && ep_index(ep) != 0)) @@ -1079,13 +1075,13 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)]; + qh = get_qh_by_ep(ep); bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) : (1 << (ep_index(ep))); if (fsl_readl(&dr_regs->endptstatus) & bitmask) - size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE) + size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE) >> DTD_LENGTH_BIT_POS; pr_debug("%s %u\n", __func__, size); diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 1d51be83fda8..f781f5dec417 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -569,6 +569,16 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length) * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) #define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) +static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) +{ + /* we only have one ep0 structure but two queue heads */ + if (ep_index(ep) != 0) + return ep->qh; + else + return &ep->udc->ep_qh[(ep->udc->ep0_dir == + USB_DIR_IN) ? 1 : 0]; +} + struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -- cgit v1.2.3 From 33dbc27f1ab3a37d04a8d226327fb3d384870e43 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 30 Sep 2011 08:55:50 +1000 Subject: drm/nouveau: add dumb ioctl support Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 45 +++++++++++++++++++++++++++++++ drivers/gpu/drm/nouveau/nouveau_drv.c | 4 +++ drivers/gpu/drm/nouveau/nouveau_drv.h | 6 +++++ 3 files changed, 55 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index ddbabefb4273..b12fd2c80812 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -369,3 +369,48 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, spin_unlock_irqrestore(&dev->event_lock, flags); return 0; } + +int +nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + struct nouveau_bo *bo; + int ret; + + args->pitch = roundup(args->width * (args->bpp / 8), 256); + args->size = args->pitch * args->height; + args->size = roundup(args->size, PAGE_SIZE); + + ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo); + if (ret) + return ret; + + ret = drm_gem_handle_create(file_priv, bo->gem, &args->handle); + drm_gem_object_unreference_unlocked(bo->gem); + return ret; +} + +int +nouveau_display_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle) +{ + return drm_gem_handle_delete(file_priv, handle); +} + +int +nouveau_display_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle, uint64_t *poffset) +{ + struct drm_gem_object *gem; + + gem = drm_gem_object_lookup(dev, file_priv, handle); + if (gem) { + struct nouveau_bo *bo = gem->driver_private; + *poffset = bo->bo.addr_space_offset; + drm_gem_object_unreference_unlocked(gem); + return 0; + } + + return -ENOENT; +} diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 9f7bb1295262..9791d13c9e3b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -433,6 +433,10 @@ static struct drm_driver driver = { .gem_open_object = nouveau_gem_object_open, .gem_close_object = nouveau_gem_object_close, + .dumb_create = nouveau_display_dumb_create, + .dumb_map_offset = nouveau_display_dumb_map_offset, + .dumb_destroy = nouveau_display_dumb_destroy, + .name = DRIVER_NAME, .desc = DRIVER_DESC, #ifdef GIT_REVISION diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 29837da1098b..4c0be3a4ed88 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1418,6 +1418,12 @@ int nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event); int nouveau_finish_page_flip(struct nouveau_channel *, struct nouveau_page_flip_state *); +int nouveau_display_dumb_create(struct drm_file *, struct drm_device *, + struct drm_mode_create_dumb *args); +int nouveau_display_dumb_map_offset(struct drm_file *, struct drm_device *, + uint32_t handle, uint64_t *offset); +int nouveau_display_dumb_destroy(struct drm_file *, struct drm_device *, + uint32_t handle); /* nv10_gpio.c */ int nv10_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag); -- cgit v1.2.3 From ffe2dee49023c2a47ef7e177ceb22ec6bcaecc11 Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Fri, 11 Nov 2011 20:47:58 +0100 Subject: drm/nvc0/gr: fix TP init for transform feedback offset queries Without this, they return bytes written since the last update of the offset, but we want the full offset. Trace shows setting this on GPC[0]/TP[0] is enough. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index a74e501afd25..ecfafd70cf0e 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -381,6 +381,8 @@ nvc0_graph_init_gpc_0(struct drm_device *dev) u8 tpnr[GPC_MAX]; int i, gpc, tpc; + nv_wr32(dev, TP_UNIT(0, 0, 0x5c), 1); /* affects TFB offset queries */ + /* * TP ROP UNKVAL(magic_not_rop_nr) * 450: 4/0/0/0 2 3 -- cgit v1.2.3 From 26cfa81357b67229f71d25b53cbfbdfb83a38bdf Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 17 Nov 2011 09:10:02 +1000 Subject: drm/nvd0/disp: fix sor dpms typo, preventing dpms on in some situations Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvd0_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c index 23d63b4b3d77..cb006a718e70 100644 --- a/drivers/gpu/drm/nouveau/nvd0_display.c +++ b/drivers/gpu/drm/nouveau/nvd0_display.c @@ -780,7 +780,7 @@ nvd0_sor_dpms(struct drm_encoder *encoder, int mode) continue; if (nv_partner != nv_encoder && - nv_partner->dcb->or == nv_encoder->or) { + nv_partner->dcb->or == nv_encoder->dcb->or) { if (nv_partner->last_dpms == DRM_MODE_DPMS_ON) return; break; -- cgit v1.2.3 From 1a97b4ace09d7d3fe213a73bc466ca33af98c91c Mon Sep 17 00:00:00 2001 From: Younes Manton Date: Tue, 22 Nov 2011 14:58:31 -0500 Subject: drm/nouveau: Keep RAMIN heap within the channel. The entire RAMIN is allocated to be 'size', but the heap is specified as 'base' + 'size' inside RAMIN, so it will overflow past RAMIN by 'base' bytes on NV50+ and clobber other allocatons unless it's size is adjusted. Signed-off-by: Younes Manton Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_object.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c index 02222c540aee..960c0ae0c0c3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_object.c +++ b/drivers/gpu/drm/nouveau/nouveau_object.c @@ -680,7 +680,7 @@ nouveau_gpuobj_channel_init_pramin(struct nouveau_channel *chan) return ret; } - ret = drm_mm_init(&chan->ramin_heap, base, size); + ret = drm_mm_init(&chan->ramin_heap, base, size - base); if (ret) { NV_ERROR(dev, "Error creating PRAMIN heap: %d\n", ret); nouveau_gpuobj_ref(NULL, &chan->ramin); -- cgit v1.2.3 From a10e9e1dbb39970f232b1e2b0e4f738e2d77079f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 25 Nov 2011 16:35:34 +1000 Subject: drm/nouveau: fix oopses caused by clear being called on unpopulated ttms Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_sgdma.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index b75258a9fe44..c8a463b76c89 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -67,7 +67,10 @@ nouveau_sgdma_clear(struct ttm_backend *be) pci_unmap_page(dev->pdev, nvbe->pages[nvbe->nr_pages], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); } + nvbe->unmap_pages = false; } + + nvbe->pages = NULL; } static void -- cgit v1.2.3 From a55b68e06b593ef7311f4a1cf9d3ae349ef7e9ed Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 9 Nov 2011 15:30:08 +1000 Subject: drm/nv50/disp: silence compiler warning NFI why this only started appearing now. The use of the uninitialised var can't actually happen, so perhaps my compiler just got stupider. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index d23ca00e7d62..06de250fe617 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -616,7 +616,7 @@ nv50_display_unk10_handler(struct drm_device *dev) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_display *disp = nv50_display(dev); u32 unk30 = nv_rd32(dev, 0x610030), mc; - int i, crtc, or, type = OUTPUT_ANY; + int i, crtc, or = 0, type = OUTPUT_ANY; NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); disp->irq.dcb = NULL; @@ -708,7 +708,7 @@ nv50_display_unk20_handler(struct drm_device *dev) struct nv50_display *disp = nv50_display(dev); u32 unk30 = nv_rd32(dev, 0x610030), tmp, pclk, script, mc = 0; struct dcb_entry *dcb; - int i, crtc, or, type = OUTPUT_ANY; + int i, crtc, or = 0, type = OUTPUT_ANY; NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); dcb = disp->irq.dcb; -- cgit v1.2.3 From f64964796dedca340608fb1075ab6baad5625851 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:26 -0500 Subject: drm/radeon/kms: add some loop timeouts in pageflip code Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Cc: stable@kernel.org Reviewed-by: Mario Kleiner Tested-by: Simon Farnsworth Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++++- drivers/gpu/drm/radeon/r100.c | 7 ++++++- drivers/gpu/drm/radeon/rs600.c | 7 ++++++- drivers/gpu/drm/radeon/rv770.c | 7 ++++++- 4 files changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 1d603a3335db..5e00d1670aa9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -82,6 +82,7 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= EVERGREEN_GRPH_UPDATE_LOCK; @@ -99,7 +100,11 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ad158ea49901..bfc08f6320f8 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -187,13 +187,18 @@ u32 r100_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = ((u32)crtc_base) | RADEON_CRTC_OFFSET__OFFSET_LOCK; + int i; /* Lock the graphics update lock */ /* update the scanout addresses */ WREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset, tmp); /* Wait for update_pending to go high. */ - while (!(RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 481b99e89f65..b1053d640423 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -62,6 +62,7 @@ u32 rs600_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= AVIVO_D1GRPH_UPDATE_LOCK; @@ -74,7 +75,11 @@ u32 rs600_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index a983f410ab89..23ae1c60ab3d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -47,6 +47,7 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= AVIVO_D1GRPH_UPDATE_LOCK; @@ -66,7 +67,11 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ -- cgit v1.2.3 From bc96f9424b0e95f2451398007be46824f93866d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Nov 2011 17:26:36 +0100 Subject: drm/radeon/kms: Hide debugging message Use the proper macro to issue the debugging message in radeon_atif_call(). Otherwise we spam the log of many systems with a message which looks like an error message of unknown origin, and could thus confuse the user. Commit dc77de12dde95c8da39e4c417eb70c7d445cf84b was a first step in this direction, but was not sufficient IMHO. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index 3f6636bb2d7f..c039e5a6bf13 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -35,7 +35,8 @@ static int radeon_atif_call(acpi_handle handle) /* Fail only if calling the method fails and ATIF is supported */ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - printk(KERN_DEBUG "failed to evaluate ATIF got %s\n", acpi_format_exception(status)); + DRM_DEBUG_DRIVER("failed to evaluate ATIF got %s\n", + acpi_format_exception(status)); kfree(buffer.pointer); return 1; } -- cgit v1.2.3 From 48cc9b2c7dae377e39836c0a88dd1c5ba5566d17 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Nov 2011 17:36:39 +0100 Subject: drm/radeon/kms: Skip ACPI call to ATIF when possible I am under the impression that it only makes sense to call the ATIF method if the graphics device has an ACPI handle attached. So we could skip the call altogether if there is no such handle. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_acpi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index c039e5a6bf13..3516a6081dcf 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -51,13 +51,13 @@ int radeon_acpi_init(struct radeon_device *rdev) acpi_handle handle; int ret; - /* No need to proceed if we're sure that ATIF is not supported */ - if (!ASIC_IS_AVIVO(rdev) || !rdev->bios) - return 0; - /* Get the device handle */ handle = DEVICE_ACPI_HANDLE(&rdev->pdev->dev); + /* No need to proceed if we're sure that ATIF is not supported */ + if (!ASIC_IS_AVIVO(rdev) || !rdev->bios || !handle) + return 0; + /* Call the ATIF method */ ret = radeon_atif_call(handle); if (ret) -- cgit v1.2.3 From 817e5000ebc4d448ca514db49b55073a724f8552 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:19 +0100 Subject: [S390] hibernate: directly trigger subchannel evaluation Using the generic css_schedule_eval to evaluate subchannels while resuming from hibernation is very slow when used with many devices. Provide a new evaluation trigger which exploits css_sched_sch_todo and use this in the resume callback for ccw devices. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.h | 5 +++ drivers/s390/cio/css.c | 104 ++++++++++++++++++++++++++-------------------- drivers/s390/cio/device.c | 4 +- 3 files changed, 66 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h index 155a82bcb9e5..4a1ff5c2eb88 100644 --- a/drivers/s390/cio/cio.h +++ b/drivers/s390/cio/cio.h @@ -68,8 +68,13 @@ struct schib { __u8 mda[4]; /* model dependent area */ } __attribute__ ((packed,aligned(4))); +/* + * When rescheduled, todo's with higher values will overwrite those + * with lower values. + */ enum sch_todo { SCH_TODO_NOTHING, + SCH_TODO_EVAL, SCH_TODO_UNREG, }; diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 92d7324acb1c..21908e67bf67 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -195,51 +195,6 @@ void css_sch_device_unregister(struct subchannel *sch) } EXPORT_SYMBOL_GPL(css_sch_device_unregister); -static void css_sch_todo(struct work_struct *work) -{ - struct subchannel *sch; - enum sch_todo todo; - - sch = container_of(work, struct subchannel, todo_work); - /* Find out todo. */ - spin_lock_irq(sch->lock); - todo = sch->todo; - CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, - sch->schid.sch_no, todo); - sch->todo = SCH_TODO_NOTHING; - spin_unlock_irq(sch->lock); - /* Perform todo. */ - if (todo == SCH_TODO_UNREG) - css_sch_device_unregister(sch); - /* Release workqueue ref. */ - put_device(&sch->dev); -} - -/** - * css_sched_sch_todo - schedule a subchannel operation - * @sch: subchannel - * @todo: todo - * - * Schedule the operation identified by @todo to be performed on the slow path - * workqueue. Do nothing if another operation with higher priority is already - * scheduled. Needs to be called with subchannel lock held. - */ -void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) -{ - CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", - sch->schid.ssid, sch->schid.sch_no, todo); - if (sch->todo >= todo) - return; - /* Get workqueue ref. */ - if (!get_device(&sch->dev)) - return; - sch->todo = todo; - if (!queue_work(cio_work_q, &sch->todo_work)) { - /* Already queued, release workqueue ref. */ - put_device(&sch->dev); - } -} - static void ssd_from_pmcw(struct chsc_ssd_info *ssd, struct pmcw *pmcw) { int i; @@ -466,6 +421,65 @@ static void css_evaluate_subchannel(struct subchannel_id schid, int slow) css_schedule_eval(schid); } +/** + * css_sched_sch_todo - schedule a subchannel operation + * @sch: subchannel + * @todo: todo + * + * Schedule the operation identified by @todo to be performed on the slow path + * workqueue. Do nothing if another operation with higher priority is already + * scheduled. Needs to be called with subchannel lock held. + */ +void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) +{ + CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", + sch->schid.ssid, sch->schid.sch_no, todo); + if (sch->todo >= todo) + return; + /* Get workqueue ref. */ + if (!get_device(&sch->dev)) + return; + sch->todo = todo; + if (!queue_work(cio_work_q, &sch->todo_work)) { + /* Already queued, release workqueue ref. */ + put_device(&sch->dev); + } +} + +static void css_sch_todo(struct work_struct *work) +{ + struct subchannel *sch; + enum sch_todo todo; + int ret; + + sch = container_of(work, struct subchannel, todo_work); + /* Find out todo. */ + spin_lock_irq(sch->lock); + todo = sch->todo; + CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, + sch->schid.sch_no, todo); + sch->todo = SCH_TODO_NOTHING; + spin_unlock_irq(sch->lock); + /* Perform todo. */ + switch (todo) { + case SCH_TODO_NOTHING: + break; + case SCH_TODO_EVAL: + ret = css_evaluate_known_subchannel(sch, 1); + if (ret == -EAGAIN) { + spin_lock_irq(sch->lock); + css_sched_sch_todo(sch, todo); + spin_unlock_irq(sch->lock); + } + break; + case SCH_TODO_UNREG: + css_sch_device_unregister(sch); + break; + } + /* Release workqueue ref. */ + put_device(&sch->dev); +} + static struct idset *slow_subchannel_set; static spinlock_t slow_subchannel_lock; static wait_queue_head_t css_eval_wq; diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index d734f4a0ecac..47269858ecb6 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1868,9 +1868,9 @@ static void __ccw_device_pm_restore(struct ccw_device *cdev) */ cdev->private->flags.resuming = 1; cdev->private->path_new_mask = LPM_ANYPATH; - css_schedule_eval(sch->schid); + css_sched_sch_todo(sch, SCH_TODO_EVAL); spin_unlock_irq(sch->lock); - css_complete_work(); + css_wait_for_slow_path(); /* cdev may have been moved to a different subchannel. */ sch = to_subchannel(cdev->dev.parent); -- cgit v1.2.3 From 659213b899f389d3a1e211796713ceaaa280fa44 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:20 +0100 Subject: [S390] cio: disallow driver io for known to be broken paths When a driver requests to do IO, we will adjust the mask of paths to be used to exclude varied offline paths. Drivers trying to do IO solely on paths which are online but some way defective may lack the information to do proper error handling. There is no reason to allow the usage of known to be broken paths. Thus restrict the paths a ccw driver can use for IO to a subset of the paths cio found usable (this also excludes offline paths). Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_ops.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index f98698d5735e..41c21ad0d5f2 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -213,9 +213,9 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, ret = cio_set_options (sch, flags); if (ret) return ret; - /* Adjust requested path mask to excluded varied off paths. */ + /* Adjust requested path mask to exclude unusable paths. */ if (lpm) { - lpm &= sch->opm; + lpm &= sch->lpm; if (lpm == 0) return -EACCES; } @@ -607,9 +607,9 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, return -EINVAL; if (cdev->private->state != DEV_STATE_ONLINE) return -EIO; - /* Adjust requested path mask to excluded varied off paths. */ + /* Adjust requested path mask to exclude unusable paths. */ if (lpm) { - lpm &= sch->opm; + lpm &= sch->lpm; if (lpm == 0) return -EACCES; } -- cgit v1.2.3 From 50c8e31f38f380f04885c66bde0bc4c946e786ee Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:21 +0100 Subject: [S390] cio: provide fake irb for transport mode IO If a driver wants to do command mode IO while CIO is doing online path verification we ignore this request and provide a fake irb when we are done and the driver can do IO again. For transport mode IO we have no such mechanism, giving the driver no other chance then to retry the action until we are done. This is not very reliable. Provide a fake irb for transport mode IO as well. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_fsm.c | 30 ++++++++++++++++++++++-------- drivers/s390/cio/device_ops.c | 12 +++++++++++- drivers/s390/cio/io_sch.h | 5 ++++- 3 files changed, 37 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 52c233fa2b12..1b853513c891 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -496,8 +496,26 @@ static void ccw_device_reset_path_events(struct ccw_device *cdev) cdev->private->pgid_reset_mask = 0; } -void -ccw_device_verify_done(struct ccw_device *cdev, int err) +static void create_fake_irb(struct irb *irb, int type) +{ + memset(irb, 0, sizeof(*irb)); + if (type == FAKE_CMD_IRB) { + struct cmd_scsw *scsw = &irb->scsw.cmd; + scsw->cc = 1; + scsw->fctl = SCSW_FCTL_START_FUNC; + scsw->actl = SCSW_ACTL_START_PEND; + scsw->stctl = SCSW_STCTL_STATUS_PEND; + } else if (type == FAKE_TM_IRB) { + struct tm_scsw *scsw = &irb->scsw.tm; + scsw->x = 1; + scsw->cc = 1; + scsw->fctl = SCSW_FCTL_START_FUNC; + scsw->actl = SCSW_ACTL_START_PEND; + scsw->stctl = SCSW_STCTL_STATUS_PEND; + } +} + +void ccw_device_verify_done(struct ccw_device *cdev, int err) { struct subchannel *sch; @@ -520,12 +538,8 @@ callback: ccw_device_done(cdev, DEV_STATE_ONLINE); /* Deliver fake irb to device driver, if needed. */ if (cdev->private->flags.fake_irb) { - memset(&cdev->private->irb, 0, sizeof(struct irb)); - cdev->private->irb.scsw.cmd.cc = 1; - cdev->private->irb.scsw.cmd.fctl = SCSW_FCTL_START_FUNC; - cdev->private->irb.scsw.cmd.actl = SCSW_ACTL_START_PEND; - cdev->private->irb.scsw.cmd.stctl = - SCSW_STCTL_STATUS_PEND; + create_fake_irb(&cdev->private->irb, + cdev->private->flags.fake_irb); cdev->private->flags.fake_irb = 0; if (cdev->handler) cdev->handler(cdev, cdev->private->intparm, diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index 41c21ad0d5f2..ec7fb6d3b479 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -198,7 +198,7 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, if (cdev->private->state == DEV_STATE_VERIFY) { /* Remember to fake irb when finished. */ if (!cdev->private->flags.fake_irb) { - cdev->private->flags.fake_irb = 1; + cdev->private->flags.fake_irb = FAKE_CMD_IRB; cdev->private->intparm = intparm; return 0; } else @@ -605,6 +605,16 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, sch = to_subchannel(cdev->dev.parent); if (!sch->schib.pmcw.ena) return -EINVAL; + if (cdev->private->state == DEV_STATE_VERIFY) { + /* Remember to fake irb when finished. */ + if (!cdev->private->flags.fake_irb) { + cdev->private->flags.fake_irb = FAKE_TM_IRB; + cdev->private->intparm = intparm; + return 0; + } else + /* There's already a fake I/O around. */ + return -EBUSY; + } if (cdev->private->state != DEV_STATE_ONLINE) return -EIO; /* Adjust requested path mask to exclude unusable paths. */ diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index 2ebb492a5c17..76253dfcc1be 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -111,6 +111,9 @@ enum cdev_todo { CDEV_TODO_UNREG_EVAL, }; +#define FAKE_CMD_IRB 1 +#define FAKE_TM_IRB 2 + struct ccw_device_private { struct ccw_device *cdev; struct subchannel *sch; @@ -138,7 +141,7 @@ struct ccw_device_private { unsigned int doverify:1; /* delayed path verification */ unsigned int donotify:1; /* call notify function */ unsigned int recog_done:1; /* dev. recog. complete */ - unsigned int fake_irb:1; /* deliver faked irb */ + unsigned int fake_irb:2; /* deliver faked irb */ unsigned int resuming:1; /* recognition while resume */ unsigned int pgroup:1; /* pathgroup is set up */ unsigned int mpath:1; /* multipathing is set up */ -- cgit v1.2.3 From 3b484ec648490518dd16ed7d8f02206a39539a59 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:22 +0100 Subject: [S390] cio: fix chsc_chp_vary The functions called by chsc_chp_vary operate on pointers to channel path ids not channel path links. (This worked by chance since the id is the first member of the link structure) Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 75c3f1f8fd43..a84631a7391d 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -529,10 +529,7 @@ __s390_vary_chpid_on(struct subchannel_id schid, void *data) int chsc_chp_vary(struct chp_id chpid, int on) { struct channel_path *chp = chpid_to_chp(chpid); - struct chp_link link; - memset(&link, 0, sizeof(struct chp_link)); - link.chpid = chpid; /* Wait until previous actions have settled. */ css_wait_for_slow_path(); /* @@ -542,10 +539,10 @@ int chsc_chp_vary(struct chp_id chpid, int on) /* Try to update the channel path descritor. */ chsc_determine_base_channel_path_desc(chpid, &chp->desc); for_each_subchannel_staged(s390_subchannel_vary_chpid_on, - __s390_vary_chpid_on, &link); + __s390_vary_chpid_on, &chpid); } else for_each_subchannel_staged(s390_subchannel_vary_chpid_off, - NULL, &link); + NULL, &chpid); return 0; } -- cgit v1.2.3 From 75464960fc0ccc505527edc1459c8ad191fbc0cc Mon Sep 17 00:00:00 2001 From: Holger Dengler Date: Thu, 1 Dec 2011 13:32:23 +0100 Subject: [S390] ap: Setup timer for sending messages after reset. Setup timer for processing messages in request queue after a successful AP bus device reset. Signed-off-by: Holger Dengler Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index ec94f049e995..96bbe9d12a79 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1552,6 +1552,8 @@ static void ap_reset(struct ap_device *ap_dev) rc = ap_init_queue(ap_dev->qid); if (rc == -ENODEV) ap_dev->unregistered = 1; + else + __ap_schedule_poll_timer(); } static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags) -- cgit v1.2.3 From 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 30 Nov 2011 16:37:41 +0800 Subject: xHCI: fix bug in xhci_clear_command_ring() When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Reported-by: Oliver Neukum --- drivers/usb/host/xhci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index aa94c0195791..a1afb7c39f7e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -711,7 +711,10 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) ring = xhci->cmd_ring; seg = ring->deq_seg; do { - memset(seg->trbs, 0, SEGMENT_SIZE); + memset(seg->trbs, 0, + sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1)); + seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= + cpu_to_le32(~TRB_CYCLE); seg = seg->next; } while (seg != ring->deq_seg); -- cgit v1.2.3 From 0de13500ad1d8a66b7dc1e7fa517ea15a2625c9e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 1 Dec 2011 10:30:16 -0800 Subject: Revert "xHCI: reset-on-resume quirk for NEC uPD720200" This reverts commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp Tested-by: Julian Sikorski Cc: Andiry Xu --- drivers/usb/host/xhci-pci.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index d2a7332daca4..ef98b38626fb 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -33,8 +33,6 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 -#define PCI_DEVICE_ID_NEC_uPD720200 0x0194 - static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -76,11 +74,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->revision); } - if (pdev->vendor == PCI_VENDOR_ID_NEC) { + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; - if (pdev->device == PCI_DEVICE_ID_NEC_uPD720200) - xhci->quirks |= XHCI_RESET_ON_RESUME; - } if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; -- cgit v1.2.3 From 307369b0ca06b27b511b61714e335ddfccf19c4f Mon Sep 17 00:00:00 2001 From: Marcin Kościelnicki Date: Wed, 30 Nov 2011 17:01:04 +0100 Subject: usb: ftdi_sio: add PID for Propox ISPcable III MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin Kościelnicki Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bd4298bb6750..ff3db5d056a5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -736,6 +736,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 571fa96b49c7..055b64ef0bba 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -112,6 +112,7 @@ /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +#define FTDI_PROPOX_ISPCABLEIII_PID 0xD739 /* Lenz LI-USB Computer Interface. */ #define FTDI_LENZ_LIUSB_PID 0xD780 -- cgit v1.2.3 From 6eebd6bb5f1ea04f04019e5c39f87a0f17ffb472 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 28 Nov 2011 21:10:05 +0000 Subject: drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL) Disabling the CRTC by setting its framebuffer to NULL, as used by drm_framebuffer_cleanup(), was failing to pass the current framebuffer to the crtc_func->disable callback. This is because of the dance within drm_crtc_helper_set_config to pass the new_fb (NULL in this case) to the drm_crtc_helper_set_mode with the currently attached fb as a parameter. drm_crtc_helper_set_mode treats this as a no-op and the encoder is still enabled. And so the current fb is forgotten before the call to drm_helper_disable_unused_functions. This patch treats disabling the CRTC as a simple special case rather than adding further complexity into the configuration logic. This fixes a pin-leak of the fb bo on Xserver close. Signed-off-by: Chris Wilson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 3969f7553fe7..d2619d72cece 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -456,6 +456,30 @@ done: EXPORT_SYMBOL(drm_crtc_helper_set_mode); +static int +drm_crtc_helper_disable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_connector *connector; + struct drm_encoder *encoder; + + /* Decouple all encoders and their attached connectors from this crtc */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc != crtc) + continue; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder != encoder) + continue; + + connector->encoder = NULL; + } + } + + drm_helper_disable_unused_functions(dev); + return 0; +} + /** * drm_crtc_helper_set_config - set a new config from userspace * @crtc: CRTC to setup @@ -510,8 +534,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) (int)set->num_connectors, set->x, set->y); } else { DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); - set->mode = NULL; - set->num_connectors = 0; + return drm_crtc_helper_disable(set->crtc); } dev = set->crtc->dev; -- cgit v1.2.3 From 392e37229f0d6358dcc7b43641df776e9f62a6e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:27 -0500 Subject: drm/radeon/kms: fix scanout of 2D tiled buffers on EG/CM Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 35 ++++++++++++++++++++++++++++++++-- drivers/gpu/drm/radeon/evergreen_reg.h | 29 ++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 87631fede1f8..2b97262e3ab1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1107,9 +1107,40 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, return -EINVAL; } - if (tiling_flags & RADEON_TILING_MACRO) + if (tiling_flags & RADEON_TILING_MACRO) { + if (rdev->family >= CHIP_CAYMAN) + tmp = rdev->config.cayman.tile_config; + else + tmp = rdev->config.evergreen.tile_config; + + switch ((tmp & 0xf0) >> 4) { + case 0: /* 4 banks */ + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK); + break; + case 1: /* 8 banks */ + default: + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK); + break; + case 2: /* 16 banks */ + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK); + break; + } + + switch ((tmp & 0xf000) >> 12) { + case 0: /* 1KB rows */ + default: + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB); + break; + case 1: /* 2KB rows */ + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB); + break; + case 2: /* 4KB rows */ + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB); + break; + } + fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1); - else if (tiling_flags & RADEON_TILING_MICRO) + } else if (tiling_flags & RADEON_TILING_MICRO) fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1); switch (radeon_crtc->crtc_id) { diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h index c781c92c3451..7d7f2155e34c 100644 --- a/drivers/gpu/drm/radeon/evergreen_reg.h +++ b/drivers/gpu/drm/radeon/evergreen_reg.h @@ -42,6 +42,17 @@ # define EVERGREEN_GRPH_DEPTH_8BPP 0 # define EVERGREEN_GRPH_DEPTH_16BPP 1 # define EVERGREEN_GRPH_DEPTH_32BPP 2 +# define EVERGREEN_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2) +# define EVERGREEN_ADDR_SURF_2_BANK 0 +# define EVERGREEN_ADDR_SURF_4_BANK 1 +# define EVERGREEN_ADDR_SURF_8_BANK 2 +# define EVERGREEN_ADDR_SURF_16_BANK 3 +# define EVERGREEN_GRPH_Z(x) (((x) & 0x3) << 4) +# define EVERGREEN_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6) +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_1 0 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_2 1 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_4 2 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_8 3 # define EVERGREEN_GRPH_FORMAT(x) (((x) & 0x7) << 8) /* 8 BPP */ # define EVERGREEN_GRPH_FORMAT_INDEXED 0 @@ -61,6 +72,24 @@ # define EVERGREEN_GRPH_FORMAT_8B_BGRA1010102 5 # define EVERGREEN_GRPH_FORMAT_RGB111110 6 # define EVERGREEN_GRPH_FORMAT_BGR101111 7 +# define EVERGREEN_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11) +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_1 0 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_2 1 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_4 2 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_8 3 +# define EVERGREEN_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13) +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_64B 0 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_128B 1 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_256B 2 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_512B 3 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB 4 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB 5 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB 6 +# define EVERGREEN_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18) +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_1 0 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_2 1 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_4 2 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_8 3 # define EVERGREEN_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20) # define EVERGREEN_GRPH_ARRAY_LINEAR_GENERAL 0 # define EVERGREEN_GRPH_ARRAY_LINEAR_ALIGNED 1 -- cgit v1.2.3 From f3a71df05082c84d1408129084736c5f742a6165 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:28 -0500 Subject: drm/radeon/kms: fix 2D tiling CS support on EG/CM Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen_cs.c | 149 ++++++++++++++++++++++++++++------ drivers/gpu/drm/radeon/evergreend.h | 31 +++++++ 2 files changed, 154 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 38e1bda73d33..cd4590aae154 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -38,6 +38,7 @@ struct evergreen_cs_track { u32 group_size; u32 nbanks; u32 npipes; + u32 row_size; /* value we track */ u32 nsamples; u32 cb_color_base_last[12]; @@ -77,6 +78,44 @@ struct evergreen_cs_track { struct radeon_bo *db_s_write_bo; }; +static u32 evergreen_cs_get_aray_mode(u32 tiling_flags) +{ + if (tiling_flags & RADEON_TILING_MACRO) + return ARRAY_2D_TILED_THIN1; + else if (tiling_flags & RADEON_TILING_MICRO) + return ARRAY_1D_TILED_THIN1; + else + return ARRAY_LINEAR_GENERAL; +} + +static u32 evergreen_cs_get_num_banks(u32 nbanks) +{ + switch (nbanks) { + case 2: + return ADDR_SURF_2_BANK; + case 4: + return ADDR_SURF_4_BANK; + case 8: + default: + return ADDR_SURF_8_BANK; + case 16: + return ADDR_SURF_16_BANK; + } +} + +static u32 evergreen_cs_get_tile_split(u32 row_size) +{ + switch (row_size) { + case 1: + default: + return ADDR_SURF_TILE_SPLIT_1KB; + case 2: + return ADDR_SURF_TILE_SPLIT_2KB; + case 4: + return ADDR_SURF_TILE_SPLIT_4KB; + } +} + static void evergreen_cs_track_init(struct evergreen_cs_track *track) { int i; @@ -490,12 +529,11 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) } ib[idx] &= ~Z_ARRAY_MODE(0xf); track->db_z_info &= ~Z_ARRAY_MODE(0xf); + ib[idx] |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->db_z_info |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else { - ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + ib[idx] |= DB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + ib[idx] |= DB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); } } break; @@ -618,13 +656,8 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - } + ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); } break; case CB_COLOR8_INFO: @@ -640,13 +673,8 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - } + ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); } break; case CB_COLOR0_PITCH: @@ -701,6 +729,16 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR9_ATTRIB: case CB_COLOR10_ATTRIB: case CB_COLOR11_ATTRIB: + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + ib[idx] |= CB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); + } break; case CB_COLOR0_DIM: case CB_COLOR1_DIM: @@ -1318,10 +1356,14 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p, } ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); if (!p->keep_tiling_flags) { - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + ib[idx+1+(i*8)+1] |= + TEX_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx+1+(i*8)+6] |= + TEX_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); + ib[idx+1+(i*8)+7] |= + TEX_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + } } texture = reloc->robj; /* tex mip base */ @@ -1422,6 +1464,7 @@ int evergreen_cs_parse(struct radeon_cs_parser *p) { struct radeon_cs_packet pkt; struct evergreen_cs_track *track; + u32 tmp; int r; if (p->track == NULL) { @@ -1430,9 +1473,63 @@ int evergreen_cs_parse(struct radeon_cs_parser *p) if (track == NULL) return -ENOMEM; evergreen_cs_track_init(track); - track->npipes = p->rdev->config.evergreen.tiling_npipes; - track->nbanks = p->rdev->config.evergreen.tiling_nbanks; - track->group_size = p->rdev->config.evergreen.tiling_group_size; + if (p->rdev->family >= CHIP_CAYMAN) + tmp = p->rdev->config.cayman.tile_config; + else + tmp = p->rdev->config.evergreen.tile_config; + + switch (tmp & 0xf) { + case 0: + track->npipes = 1; + break; + case 1: + default: + track->npipes = 2; + break; + case 2: + track->npipes = 4; + break; + case 3: + track->npipes = 8; + break; + } + + switch ((tmp & 0xf0) >> 4) { + case 0: + track->nbanks = 4; + break; + case 1: + default: + track->nbanks = 8; + break; + case 2: + track->nbanks = 16; + break; + } + + switch ((tmp & 0xf00) >> 8) { + case 0: + track->group_size = 256; + break; + case 1: + default: + track->group_size = 512; + break; + } + + switch ((tmp & 0xf000) >> 12) { + case 0: + track->row_size = 1; + break; + case 1: + default: + track->row_size = 2; + break; + case 2: + track->row_size = 4; + break; + } + p->track = track; } do { diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index b937c49054d9..e00039e59a75 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -899,6 +899,10 @@ #define DB_HTILE_DATA_BASE 0x28014 #define DB_Z_INFO 0x28040 # define Z_ARRAY_MODE(x) ((x) << 4) +# define DB_TILE_SPLIT(x) (((x) & 0x7) << 8) +# define DB_NUM_BANKS(x) (((x) & 0x3) << 12) +# define DB_BANK_WIDTH(x) (((x) & 0x3) << 16) +# define DB_BANK_HEIGHT(x) (((x) & 0x3) << 20) #define DB_STENCIL_INFO 0x28044 #define DB_Z_READ_BASE 0x28048 #define DB_STENCIL_READ_BASE 0x2804c @@ -951,6 +955,29 @@ # define CB_SF_EXPORT_FULL 0 # define CB_SF_EXPORT_NORM 1 #define CB_COLOR0_ATTRIB 0x28c74 +# define CB_TILE_SPLIT(x) (((x) & 0x7) << 5) +# define ADDR_SURF_TILE_SPLIT_64B 0 +# define ADDR_SURF_TILE_SPLIT_128B 1 +# define ADDR_SURF_TILE_SPLIT_256B 2 +# define ADDR_SURF_TILE_SPLIT_512B 3 +# define ADDR_SURF_TILE_SPLIT_1KB 4 +# define ADDR_SURF_TILE_SPLIT_2KB 5 +# define ADDR_SURF_TILE_SPLIT_4KB 6 +# define CB_NUM_BANKS(x) (((x) & 0x3) << 10) +# define ADDR_SURF_2_BANK 0 +# define ADDR_SURF_4_BANK 1 +# define ADDR_SURF_8_BANK 2 +# define ADDR_SURF_16_BANK 3 +# define CB_BANK_WIDTH(x) (((x) & 0x3) << 13) +# define ADDR_SURF_BANK_WIDTH_1 0 +# define ADDR_SURF_BANK_WIDTH_2 1 +# define ADDR_SURF_BANK_WIDTH_4 2 +# define ADDR_SURF_BANK_WIDTH_8 3 +# define CB_BANK_HEIGHT(x) (((x) & 0x3) << 16) +# define ADDR_SURF_BANK_HEIGHT_1 0 +# define ADDR_SURF_BANK_HEIGHT_2 1 +# define ADDR_SURF_BANK_HEIGHT_4 2 +# define ADDR_SURF_BANK_HEIGHT_8 3 #define CB_COLOR0_DIM 0x28c78 /* only CB0-7 blocks have these regs */ #define CB_COLOR0_CMASK 0x28c7c @@ -1137,7 +1164,11 @@ # define SQ_SEL_1 5 #define SQ_TEX_RESOURCE_WORD5_0 0x30014 #define SQ_TEX_RESOURCE_WORD6_0 0x30018 +# define TEX_TILE_SPLIT(x) (((x) & 0x7) << 29) #define SQ_TEX_RESOURCE_WORD7_0 0x3001c +# define TEX_BANK_WIDTH(x) (((x) & 0x3) << 8) +# define TEX_BANK_HEIGHT(x) (((x) & 0x3) << 10) +# define TEX_NUM_BANKS(x) (((x) & 0x3) << 16) #define SQ_VTX_CONSTANT_WORD0_0 0x30000 #define SQ_VTX_CONSTANT_WORD1_0 0x30004 -- cgit v1.2.3 From bab9efc206ba89766c53a9042eb771e87e68c42b Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 28 Nov 2011 12:25:43 +0100 Subject: vmwgfx: integer overflow in vmw_kms_update_layout_ioctl() There are two issues in vmw_kms_update_layout_ioctl(). First, the for loop forgets to index rects and only checks the first element. Second, there is a potential integer overflow if userspace passes in a large arg->num_outputs. The call to kzalloc() would allocate a small buffer, leading to out-of-bounds read. Reported-by: Haogang Chen Signed-off-by: Xi Wang Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 880e285d7578..37d40545ed77 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1809,7 +1809,8 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, } rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect); - rects = kzalloc(rects_size, GFP_KERNEL); + rects = kcalloc(arg->num_outputs, sizeof(struct drm_vmw_rect), + GFP_KERNEL); if (unlikely(!rects)) { ret = -ENOMEM; goto out_unlock; @@ -1824,10 +1825,10 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, } for (i = 0; i < arg->num_outputs; ++i) { - if (rects->x < 0 || - rects->y < 0 || - rects->x + rects->w > mode_config->max_width || - rects->y + rects->h > mode_config->max_height) { + if (rects[i].x < 0 || + rects[i].y < 0 || + rects[i].x + rects[i].w > mode_config->max_width || + rects[i].y + rects[i].h > mode_config->max_height) { DRM_ERROR("Invalid GUI layout.\n"); ret = -EINVAL; goto out_free; -- cgit v1.2.3 From a7a280493fb63f8e9fbfc8feec5810bf50e1e54f Mon Sep 17 00:00:00 2001 From: Major Lee Date: Tue, 15 Nov 2011 15:31:23 -0800 Subject: x86/mrst: Battery fixes When DCDC input line over current detecting, PMIC will change charging current automatically. Logging event is enough. Signed-off-by: Major Lee Signed-off-by: Alan Cox Cc: Mathias Nyman Cc: Feng Tang Cc: "H. Peter Anvin" [fix build] Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- drivers/power/intel_mid_battery.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c index cffcb7c00b00..01fa671ec97f 100644 --- a/drivers/power/intel_mid_battery.c +++ b/drivers/power/intel_mid_battery.c @@ -61,7 +61,8 @@ MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages."); #define PMIC_BATT_CHR_SBATDET_MASK (1 << 5) #define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6) #define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7) -#define PMIC_BATT_CHR_EXCPT_MASK 0xC6 +#define PMIC_BATT_CHR_EXCPT_MASK 0x86 + #define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31) #define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF @@ -304,11 +305,6 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi) pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT); batt_exception = 1; - } else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { - pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); - batt_exception = 1; } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) { pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT; pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; @@ -316,6 +312,10 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi) batt_exception = 1; } else { pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; + if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { + /* PMIC will change charging current automatically */ + pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); + } } } -- cgit v1.2.3 From c8f369ab6003a2df3cdae30f9aba641a4a606034 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 26 Oct 2011 18:45:39 +0300 Subject: intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev() dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and atsr_parse_dev() which are both marked as __init. Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Signed-off-by: Sergey Senozhatsky Cc: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel Cc: Ohad Ben-Cohen Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfish Signed-off-by: Ingo Molnar --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index c0c7820d4c46..a004c3945c67 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3524,7 +3524,7 @@ found: return 0; } -int dmar_parse_rmrr_atsr_dev(void) +int __init dmar_parse_rmrr_atsr_dev(void) { struct dmar_rmrr_unit *rmrr, *rmrr_n; struct dmar_atsr_unit *atsr, *atsr_n; -- cgit v1.2.3 From 61ed26e388ac67da262bb1a95d0474e4cabd4b0d Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 26 Oct 2011 19:15:07 +0300 Subject: intr_remapping: Fix section mismatch in ir_dev_scope_init() Fix: Section mismatch in reference from the function ir_dev_scope_init() to the function .init.text:dmar_dev_scope_init() The function ir_dev_scope_init() references the function __init dmar_dev_scope_init(). Signed-off-by: Sergey Senozhatsky Cc: Suresh Siddha Cc: Youquan Song Cc: Ohad Ben-Cohen Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfish Signed-off-by: Ingo Molnar --- drivers/iommu/intr_remapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intr_remapping.c b/drivers/iommu/intr_remapping.c index 07c9f189f314..6777ca049471 100644 --- a/drivers/iommu/intr_remapping.c +++ b/drivers/iommu/intr_remapping.c @@ -773,7 +773,7 @@ int __init parse_ioapics_under_ir(void) return ir_supported; } -int ir_dev_scope_init(void) +int __init ir_dev_scope_init(void) { if (!intr_remapping_enabled) return 0; -- cgit v1.2.3 From 11948b9335865dc0ba3a5ca2c9c255291a8d50fb Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 16 Nov 2011 17:37:45 -0600 Subject: toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT The Satellite C670-10V generates notifications for hotkeys but does not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed it gets stuck in an infinite loop in toshiba_acpi_notify. To fix this, detect whether or not HCI_SYSTEM_EVENT is supported up-front and don't try to read system events if it isn't supported. In addition, limit the number of retries when reading HCI_SYSTEM_EVENT fails so that this loop cannot run unbounded. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/toshiba_acpi.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 13ef8c37471d..dcdc1f4a4624 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -121,6 +121,7 @@ struct toshiba_acpi_dev { int illumination_supported:1; int video_supported:1; int fan_supported:1; + int system_event_supported:1; struct mutex mutex; }; @@ -724,7 +725,7 @@ static int keys_proc_show(struct seq_file *m, void *v) u32 hci_result; u32 value; - if (!dev->key_event_valid) { + if (!dev->key_event_valid && dev->system_event_supported) { hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); if (hci_result == HCI_SUCCESS) { dev->key_event_valid = 1; @@ -964,6 +965,8 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev) /* enable event fifo */ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); + if (hci_result == HCI_SUCCESS) + dev->system_event_supported = 1; props.type = BACKLIGHT_PLATFORM; props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; @@ -1032,12 +1035,15 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) { struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); u32 hci_result, value; + int retries = 3; - if (event != 0x80) + if (!dev->system_event_supported || event != 0x80) return; + do { hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { + switch (hci_result) { + case HCI_SUCCESS: if (value == 0x100) continue; /* act on key press; ignore key release */ @@ -1049,14 +1055,19 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) pr_info("Unknown key %x\n", value); } - } else if (hci_result == HCI_NOT_SUPPORTED) { + break; + case HCI_NOT_SUPPORTED: /* This is a workaround for an unresolved issue on * some machines where system events sporadically * become disabled. */ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); pr_notice("Re-enabled hotkeys\n"); + /* fall through */ + default: + retries--; + break; } - } while (hci_result != HCI_EMPTY); + } while (retries && hci_result != HCI_EMPTY); } -- cgit v1.2.3 From 8c9b04346c0ae302d8b7b7df16cc19ddff77742e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 5 Dec 2011 14:47:48 +0100 Subject: gpio: fix a build failure on KS8695 GPIO I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely Reported-by: Mike Frysinger Signed-off-by: Linus Walleij Signed-off-by: Linus Torvalds --- drivers/gpio/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index dbcb0bcfd8da..4e018d6a7639 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o -obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o +obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o -- cgit v1.2.3 From 811fd3010cf512f2e23e6c4c912aad54516dc706 Mon Sep 17 00:00:00 2001 From: françois romieu Date: Sun, 4 Dec 2011 20:30:45 +0000 Subject: r8169: Rx FIFO overflow fixes. Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu Cc: hayeswang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 42 +++++++++++++++--------------------- 1 file changed, 17 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 6f06aa10f0d7..7a1e3a69f193 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1183,11 +1183,13 @@ static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr) return value; } -static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) +static void rtl8169_irq_mask_and_ack(struct rtl8169_private *tp) { - RTL_W16(IntrMask, 0x0000); + void __iomem *ioaddr = tp->mmio_addr; - RTL_W16(IntrStatus, 0xffff); + RTL_W16(IntrMask, 0x0000); + RTL_W16(IntrStatus, tp->intr_event); + RTL_R8(ChipCmd); } static unsigned int rtl8169_tbi_reset_pending(struct rtl8169_private *tp) @@ -4339,7 +4341,7 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) void __iomem *ioaddr = tp->mmio_addr; /* Disable interrupts */ - rtl8169_irq_mask_and_ack(ioaddr); + rtl8169_irq_mask_and_ack(tp); rtl_rx_close(tp); @@ -4885,8 +4887,7 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W16(IntrMitigate, 0x5151); /* Work around for RxFIFO overflow. */ - if (tp->mac_version == RTL_GIGA_MAC_VER_11 || - tp->mac_version == RTL_GIGA_MAC_VER_22) { + if (tp->mac_version == RTL_GIGA_MAC_VER_11) { tp->intr_event |= RxFIFOOver | PCSTimeout; tp->intr_event &= ~RxOverflow; } @@ -5076,6 +5077,11 @@ static void rtl_hw_start_8101(struct net_device *dev) void __iomem *ioaddr = tp->mmio_addr; struct pci_dev *pdev = tp->pci_dev; + if (tp->mac_version >= RTL_GIGA_MAC_VER_30) { + tp->intr_event &= ~RxFIFOOver; + tp->napi_event &= ~RxFIFOOver; + } + if (tp->mac_version == RTL_GIGA_MAC_VER_13 || tp->mac_version == RTL_GIGA_MAC_VER_16) { int cap = pci_pcie_cap(pdev); @@ -5342,7 +5348,7 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev) /* Wait for any pending NAPI task to complete */ napi_disable(&tp->napi); - rtl8169_irq_mask_and_ack(ioaddr); + rtl8169_irq_mask_and_ack(tp); tp->intr_mask = 0xffff; RTL_W16(IntrMask, tp->intr_event); @@ -5804,6 +5810,10 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) */ status = RTL_R16(IntrStatus); while (status && status != 0xffff) { + status &= tp->intr_event; + if (!status) + break; + handled = 1; /* Handle all of the error cases first. These will reset @@ -5818,27 +5828,9 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) switch (tp->mac_version) { /* Work around for rx fifo overflow */ case RTL_GIGA_MAC_VER_11: - case RTL_GIGA_MAC_VER_22: - case RTL_GIGA_MAC_VER_26: netif_stop_queue(dev); rtl8169_tx_timeout(dev); goto done; - /* Testers needed. */ - case RTL_GIGA_MAC_VER_17: - case RTL_GIGA_MAC_VER_19: - case RTL_GIGA_MAC_VER_20: - case RTL_GIGA_MAC_VER_21: - case RTL_GIGA_MAC_VER_23: - case RTL_GIGA_MAC_VER_24: - case RTL_GIGA_MAC_VER_27: - case RTL_GIGA_MAC_VER_28: - case RTL_GIGA_MAC_VER_31: - /* Experimental science. Pktgen proof. */ - case RTL_GIGA_MAC_VER_12: - case RTL_GIGA_MAC_VER_25: - if (status == RxFIFOOver) - goto done; - break; default: break; } -- cgit v1.2.3 From c7c2c39be8ed4e503e987151f4599455060e219a Mon Sep 17 00:00:00 2001 From: françois romieu Date: Sun, 4 Dec 2011 20:30:52 +0000 Subject: r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu Cc: hayeswang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a1e3a69f193..67bf07819992 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3935,8 +3935,6 @@ static void rtl_hw_reset(struct rtl8169_private *tp) break; udelay(100); } - - rtl8169_init_ring_indexes(tp); } static int __devinit @@ -5395,14 +5393,16 @@ static void rtl8169_reset_task(struct work_struct *work) if (!netif_running(dev)) goto out_unlock; + rtl8169_hw_reset(tp); + rtl8169_wait_for_quiescence(dev); for (i = 0; i < NUM_RX_DESC; i++) rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz); rtl8169_tx_clear(tp); + rtl8169_init_ring_indexes(tp); - rtl8169_hw_reset(tp); rtl_hw_start(dev); netif_wake_queue(dev); rtl8169_check_link_status(dev, tp, tp->mmio_addr); @@ -5413,11 +5413,6 @@ out_unlock: static void rtl8169_tx_timeout(struct net_device *dev) { - struct rtl8169_private *tp = netdev_priv(dev); - - rtl8169_hw_reset(tp); - - /* Let's wait a bit while any (async) irq lands on */ rtl8169_schedule_work(dev, rtl8169_reset_task); } -- cgit v1.2.3 From 6b84bd167458545f0806d5a1a8a102004365d44e Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Mon, 5 Dec 2011 06:57:44 +0000 Subject: netback: Fix alert message. The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: Wei Liu Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 1ae270eed51a..15e332d08c8d 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1668,7 +1668,7 @@ static int __init netback_init(void) "netback/%u", group); if (IS_ERR(netbk->task)) { - printk(KERN_ALERT "kthread_run() fails at netback\n"); + printk(KERN_ALERT "kthread_create() fails at netback\n"); del_timer(&netbk->net_timer); rc = PTR_ERR(netbk->task); goto failed_init; -- cgit v1.2.3 From 65e9d805e96c7e6a15c1e3b0c00a842d2249bab8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 5 Dec 2011 19:44:22 +0000 Subject: pasemi_mac: Fix building as module Commit ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/pasemi/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/pasemi/Makefile b/drivers/net/ethernet/pasemi/Makefile index 05db5434bafc..90497ffb1ac3 100644 --- a/drivers/net/ethernet/pasemi/Makefile +++ b/drivers/net/ethernet/pasemi/Makefile @@ -2,4 +2,5 @@ # Makefile for the A Semi network device drivers. # -obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o pasemi_mac_ethtool.o +obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o +pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o -- cgit v1.2.3