From a5ac1ead32c9aac285f6436e09b4f6111996e9b8 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 15 Nov 2018 23:40:44 +0100 Subject: clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel The cpu_div3 clock (cpu_in divided by 3) generates a signal with a duty cycle of 33%. The CPU clock however requires a clock signal with a duty cycle of 50% to run stable. cpu_div3 was observed to be problematic when cycling through all available CPU frequencies (with additional patches on top of this one) while running "stress --cpu 4" in the background. This caused sporadic hangs where the whole system would fully lock up. Amlogic's 3.10 kernel code also does not use the cpu_div3 clock either when changing the CPU clock. Signed-off-by: Martin Blumenstingl Reviewed-by: Jerome Brunet Signed-off-by: Neil Armstrong Link: https://lkml.kernel.org/r/20181115224048.13511-3-martin.blumenstingl@googlemail.com --- drivers/clk/meson/meson8b.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 9bd5920da0ff..a96bfee58a61 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -608,20 +608,27 @@ static struct clk_regmap meson8b_cpu_scale_div = { }, }; +static u32 mux_table_cpu_scale_out_sel[] = { 0, 1, 3 }; static struct clk_regmap meson8b_cpu_scale_out_sel = { .data = &(struct clk_regmap_mux_data){ .offset = HHI_SYS_CPU_CLK_CNTL0, .mask = 0x3, .shift = 2, + .table = mux_table_cpu_scale_out_sel, }, .hw.init = &(struct clk_init_data){ .name = "cpu_scale_out_sel", .ops = &clk_regmap_mux_ro_ops, + /* + * NOTE: We are skipping the parent with value 0x2 (which is + * "cpu_div3") because it results in a duty cycle of 33% which + * makes the system unstable and can result in a lockup of the + * whole system. + */ .parent_names = (const char *[]) { "cpu_in_sel", "cpu_div2", - "cpu_div3", "cpu_scale_div" }, - .num_parents = 4, + .num_parents = 3, .flags = CLK_SET_RATE_PARENT, }, }; -- cgit v1.2.3