From 2226b1c219a18804bc40e32a5d53c287a6c925d9 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:55:32 +0000 Subject: uwb: safely remove all reservations When removing all reservations during shutdown, terminate them first and then wait for any pending timeout work to complete. This prevents the timeout work from running after the reservation has been freed. Signed-off-by: David Vrabel --- drivers/uwb/rsv.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index ec6eecb32f30..886f977cd2ea 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv) devaddr = rsv->target.devaddr; uwb_dev_addr_print(target, sizeof(target), &devaddr); - dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); + dev_dbg(dev, "rsv %s %s -> %s: %s\n", + text, owner, target, uwb_rsv_state_str(rsv->state)); } static void uwb_rsv_release(struct kref *kref) @@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv) if (uwb_rsv_is_owner(rsv)) uwb_rsv_put_stream(rsv); - - del_timer_sync(&rsv->timer); + uwb_dev_put(rsv->owner); if (rsv->target.type == UWB_RSV_TARGET_DEV) uwb_dev_put(rsv->target.dev); @@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc) mutex_lock(&rc->rsvs_mutex); list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - uwb_rsv_remove(rsv); + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); } /* Cancel any postponed update. */ rc->set_drp_ie_pending = 0; mutex_unlock(&rc->rsvs_mutex); cancel_delayed_work_sync(&rc->rsv_update_work); + flush_workqueue(rc->rsv_workq); + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); } void uwb_rsv_init(struct uwb_rc *rc) -- cgit v1.2.3 From 9a9b1d17ba59b78e4bae67f7a7cf546986a42e7d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:58:02 +0000 Subject: wusb: return -ENOTCONN when resetting a port with no connected device If reading the device descriptor fails during hub_port_init() fails, then the port is disabled, disconnecting the device. The port is then reset at the start of the next init attempt but there is no device to reset. Signed-off-by: David Vrabel --- drivers/usb/wusbcore/devconnect.c | 1 + drivers/usb/wusbcore/rh.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e2e7e4bc8463..8e18141bb2e0 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; if (wusb_dev) { + dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); if (!list_empty(&wusb_dev->cack_node)) list_del_init(&wusb_dev->cack_node); /* For the one in cack_add() */ diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index 95c6fa3bf6b2..407a9fcc89cc 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); struct wusb_dev *wusb_dev = port->wusb_dev; + if (wusb_dev == NULL) + return -ENOTCONN; + port->status |= USB_PORT_STAT_RESET; port->change |= USB_PORT_STAT_C_RESET; -- cgit v1.2.3 From 04c470adb01c62bb9bd663cfc4875cf0a4eb01ab Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 4 Jan 2009 11:13:50 +0800 Subject: uwb: remove unused #include 's Remove unused #include 's in file(s) below, drivers/uwb/allocator.c Signed-off-by: Huang Weiyi Signed-off-by: David Vrabel --- drivers/uwb/allocator.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c index c8185e6b0cd5..c13cec7dcbc5 100644 --- a/drivers/uwb/allocator.c +++ b/drivers/uwb/allocator.c @@ -15,7 +15,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include #include #include -- cgit v1.2.3 From a5e6ced58d423cb09c4fc0087dcfdb0b5deb5e1c Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 7 Jan 2009 10:54:22 +0000 Subject: wusb: timeout when waiting for ASL/PZL updates in whci-hcd Timeout if an ASL or PZL update doesn't not complete and reset the hardware. Signed-off-by: David Vrabel --- drivers/usb/host/whci/asl.c | 9 +++++++-- drivers/usb/host/whci/hw.c | 15 +++++++++++++++ drivers/usb/host/whci/pzl.c | 9 +++++++-- drivers/usb/host/whci/whcd.h | 1 + 4 files changed, 30 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 577c0d29849d..2291c5f5af51 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -170,12 +170,17 @@ void asl_stop(struct whc *whc) void asl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); + t = wait_event_timeout( + whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "ASL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c index d498e7203217..6afa2e379160 100644 --- a/drivers/usb/host/whci/hw.c +++ b/drivers/usb/host/whci/hw.c @@ -87,3 +87,18 @@ out: return ret; } + +/** + * whc_hw_error - recover from a hardware error + * @whc: the WHCI HC that broke. + * @reason: a description of the failure. + * + * Recover from broken hardware with a full reset. + */ +void whc_hw_error(struct whc *whc, const char *reason) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + + dev_err(&whc->umc->dev, "hardware error: %s\n", reason); + wusbhc_reset_all(wusbhc); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 2ae5abf69a6a..7dc85a0bee7c 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc) void pzl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); + t = wait_event_timeout( + whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "PZL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index 0f3540f04f53..d3543a181dc9 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc); /* hw.c */ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); +void whc_hw_error(struct whc *whc, const char *reason); /* wusb.c */ int whc_wusbhc_start(struct wusbhc *wusbhc); -- cgit v1.2.3 From 141e6ebd1b1759bd5cebf092b7216b6f1c7b4c4f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:44:11 +0100 Subject: UBI: add ioctl for map operation This patch adds ioctl for the LEB map operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 14 ++++++++++++++ include/mtd/ubi-user.h | 15 +++++++++++++++ 2 files changed, 29 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf31ed0814..055e3f563c13 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -518,6 +518,20 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_wl_flush(ubi); break; } + + /* Logical eraseblock map command */ + case UBI_IOCEBMAP: + { + struct ubi_map_req req; + + err = copy_from_user(&req, argp, sizeof(struct ubi_map_req)); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_map(desc, req.lnum, req.dtype); + break; + } #endif default: diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 2dc2eb2b8e22..758574039fca 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -133,6 +133,9 @@ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) /* An atomic eraseblock change command */ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) +/* Map an eraseblock, used for debugging, disabled by default */ +#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) + /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 @@ -319,4 +322,16 @@ struct ubi_leb_change_req { int8_t padding[7]; } __attribute__ ((packed)); +/** + * struct ubi_map_req - a data structure used in map eraseblock requests. + * @lnum: logical eraseblock number to unmap + * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) + * @padding: reserved for future, not used, has to be zeroed + */ +struct ubi_map_req { + int32_t lnum; + int8_t dtype; + int8_t padding[3]; +} __attribute__ ((packed)); + #endif /* __UBI_USER_H__ */ -- cgit v1.2.3 From c3da23be1673be4e738aea235604b4e6cb259655 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:46:19 +0100 Subject: UBI: add ioctl for unmap operation This patch adds ioctl for the LEB unmap operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 15 ++++++++++++++- include/mtd/ubi-user.h | 3 ++- 2 files changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 055e3f563c13..fd7e0f923b38 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -532,13 +532,26 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_leb_map(desc, req.lnum, req.dtype); break; } + + /* Logical eraseblock un-map command */ + case UBI_IOCEBUNMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_unmap(desc, lnum); + break; + } #endif default: err = -ENOTTY; break; } - return err; } diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 758574039fca..ee2ea2e224af 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -135,7 +135,8 @@ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) /* Map an eraseblock, used for debugging, disabled by default */ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) - +/* Unmap an eraseblock, used for debugging, disabled by default */ +#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 -- cgit v1.2.3 From a27ce8f55dd5fddf0b8ea179cce8f399c13dc94f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:48:59 +0100 Subject: UBI: add ioctl for is_mapped operation This patch adds ioctl to check if an LEB is mapped or not (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 14 ++++++++++++++ include/mtd/ubi-user.h | 2 ++ 2 files changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index fd7e0f923b38..9ddbade72887 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -546,6 +546,20 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_leb_unmap(desc, lnum); break; } + + /* Check if logical eraseblock is mapped command */ + case UBI_IOCEBISMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_is_mapped(desc, lnum); + break; + } #endif default: diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index ee2ea2e224af..5828d7879199 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -137,6 +137,8 @@ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) /* Unmap an eraseblock, used for debugging, disabled by default */ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) +/* Check if an eraseblock is mapped, used for debugging, disabled by default */ +#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 -- cgit v1.2.3 From 573135b5dbc02be12940558db23158cc9ee89c66 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:02:08 +0200 Subject: UBI: remove unnecessry header inclusion Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 9ddbade72887..98cf7a4ceea8 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include "ubi.h" -- cgit v1.2.3 From ade44ce07c9316351ae321051221c9bad3af3a44 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:03:22 +0200 Subject: UBI: allow all ioctls Some ioctl's in UBI are enabled only when debugging is switched on. There is not particular reason for this, just noone needed them. However, some people need the now for their user-space development. Thus, allow these ioctl's even if UBI debugging is disabled. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf7a4ceea8..c183be99c6ca 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -486,7 +486,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO /* Logical eraseblock erasure command */ case UBI_IOCEBER: { @@ -559,7 +558,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_is_mapped(desc, lnum); break; } -#endif default: err = -ENOTTY; -- cgit v1.2.3 From 4d187a88d3ee3be6a1a0b6859eb00f70e1601b5e Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 11 Jan 2009 23:55:39 +0100 Subject: UBI: constify file operations Signed-off-by: Jan Engelhardt Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 6 +++--- drivers/mtd/ubi/ubi.h | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index c183be99c6ca..d99935c0f3c6 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -1025,20 +1025,20 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, } /* UBI control character device operations */ -struct file_operations ubi_ctrl_cdev_operations = { +const struct file_operations ubi_ctrl_cdev_operations = { .ioctl = ctrl_cdev_ioctl, .owner = THIS_MODULE, }; /* UBI character device operations */ -struct file_operations ubi_cdev_operations = { +const struct file_operations ubi_cdev_operations = { .owner = THIS_MODULE, .ioctl = ubi_cdev_ioctl, .llseek = no_llseek, }; /* UBI volume character device operations */ -struct file_operations ubi_vol_cdev_operations = { +const struct file_operations ubi_vol_cdev_operations = { .owner = THIS_MODULE, .open = vol_cdev_open, .release = vol_cdev_release, diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 4a8ec485c91d..381f0e1d0a74 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -449,9 +449,9 @@ struct ubi_device { }; extern struct kmem_cache *ubi_wl_entry_slab; -extern struct file_operations ubi_ctrl_cdev_operations; -extern struct file_operations ubi_cdev_operations; -extern struct file_operations ubi_vol_cdev_operations; +extern const struct file_operations ubi_ctrl_cdev_operations; +extern const struct file_operations ubi_cdev_operations; +extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; -- cgit v1.2.3 From f429b2ea8eadb5a576542a70f7fd6f5c2a7455e1 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:06:55 +0200 Subject: UBI: add ioctl compatibility UBI ioctl's do not work when running 64-bit kernel and 32-bit user-land. Fix this by adding the compat_ioctl method. Also, UBI serializes all ioctls, so more than one ioctl at a time is not a problem. Amd UBI does not seem to depend on anything else, so use unlocked_ioctl instead of ioctl (no BKL needed). Reported-by: Geert Uytterhoeven Signed-off-by: Artem Bityutskiy Reviewed-by: Arnd Bergmann --- drivers/mtd/ubi/cdev.c | 80 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 57 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index d99935c0f3c6..0a2d835fec80 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include "ubi.h" @@ -401,8 +402,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf, return count; } -static int vol_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long vol_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_volume_desc *desc = file->private_data; @@ -800,8 +801,8 @@ out_free: return err; } -static int ubi_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_device *ubi; @@ -811,7 +812,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, if (!capable(CAP_SYS_RESOURCE)) return -EPERM; - ubi = ubi_get_by_major(imajor(inode)); + ubi = ubi_get_by_major(imajor(file->f_mapping->host)); if (!ubi) return -ENODEV; @@ -947,8 +948,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, return err; } -static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; void __user *argp = (void __user *)arg; @@ -1024,26 +1025,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, return err; } -/* UBI control character device operations */ -const struct file_operations ubi_ctrl_cdev_operations = { - .ioctl = ctrl_cdev_ioctl, - .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT +static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return vol_cdev_ioctl(file, cmd, translated_arg); +} + +static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ubi_cdev_ioctl(file, cmd, translated_arg); +} + +static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ctrl_cdev_ioctl(file, cmd, translated_arg); +} +#else +#define vol_cdev_compat_ioctl NULL +#define ubi_cdev_compat_ioctl NULL +#define ctrl_cdev_compat_ioctl NULL +#endif + +/* UBI volume character device operations */ +const struct file_operations ubi_vol_cdev_operations = { + .owner = THIS_MODULE, + .open = vol_cdev_open, + .release = vol_cdev_release, + .llseek = vol_cdev_llseek, + .read = vol_cdev_read, + .write = vol_cdev_write, + .unlocked_ioctl = vol_cdev_ioctl, + .compat_ioctl = vol_cdev_compat_ioctl, }; /* UBI character device operations */ const struct file_operations ubi_cdev_operations = { - .owner = THIS_MODULE, - .ioctl = ubi_cdev_ioctl, - .llseek = no_llseek, + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ubi_cdev_ioctl, + .compat_ioctl = ubi_cdev_compat_ioctl, }; -/* UBI volume character device operations */ -const struct file_operations ubi_vol_cdev_operations = { - .owner = THIS_MODULE, - .open = vol_cdev_open, - .release = vol_cdev_release, - .llseek = vol_cdev_llseek, - .read = vol_cdev_read, - .write = vol_cdev_write, - .ioctl = vol_cdev_ioctl, +/* UBI control character device operations */ +const struct file_operations ubi_ctrl_cdev_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = ctrl_cdev_ioctl, + .compat_ioctl = ctrl_cdev_compat_ioctl, }; -- cgit v1.2.3 From 3013ee31b6c5fd9a49a81816d6c13e1cdb7a1288 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 19:08:43 +0200 Subject: UBI: use nicer 64-bit math Get rid of 'do_div()' and use more user-friendly primitives from 'linux/math64.h'. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/cdev.c | 20 +++++--------------- drivers/mtd/ubi/gluebi.c | 11 +++-------- drivers/mtd/ubi/scan.c | 8 +++----- drivers/mtd/ubi/upd.c | 21 +++++++-------------- drivers/mtd/ubi/vmt.c | 17 +++++++---------- 5 files changed, 25 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 0a2d835fec80..f9631eb3fef3 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -41,8 +41,8 @@ #include #include #include +#include #include -#include #include "ubi.h" /** @@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, int err, lnum, off, len, tbuf_size; size_t count_save = count; void *tbuf; - uint64_t tmp; dbg_gen("read %zd bytes from offset %lld of volume %d", count, *offp, vol->vol_id); @@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return -ENOMEM; len = count > tbuf_size ? tbuf_size : count; - - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); do { cond_resched(); @@ -279,7 +275,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, int lnum, off, len, tbuf_size, err = 0; size_t count_save = count; char *tbuf; - uint64_t tmp; dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, if (vol->vol_type == UBI_STATIC_VOLUME) return -EROFS; - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); if (off & (ubi->min_io_size - 1)) { dbg_err("unaligned position"); return -EINVAL; @@ -882,7 +874,6 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, case UBI_IOCRSVOL: { int pebs; - uint64_t tmp; struct ubi_rsvol_req req; dbg_gen("re-size volume"); @@ -902,9 +893,8 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, break; } - tmp = req.bytes; - pebs = !!do_div(tmp, desc->vol->usable_leb_size); - pebs += tmp; + pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1, + desc->vol->usable_leb_size); mutex_lock(&ubi->volumes_mutex); err = ubi_resize_volume(desc, pebs); diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 6dd4f5e77f82..49cd55ade9c8 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -28,7 +28,7 @@ * eraseblock size is equivalent to the logical eraseblock size of the volume. */ -#include +#include #include "ubi.h" /** @@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = from; dbg_gen("read %zd bytes from offset %lld", len, from); @@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, vol = container_of(mtd, struct ubi_volume, gluebi_mtd); ubi = vol->ubi; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; - + lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { size_t to_read = mtd->erasesize - offs; @@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = to; dbg_gen("write %zd bytes to offset %lld", len, to); @@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, if (ubi->ro_mode) return -EROFS; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; + lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index ecde202a5a12..c3d653ba5ca0 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) dbg_msg("scanning is finished"); /* Calculate mean erase counter */ - if (si->ec_count) { - do_div(si->ec_sum, si->ec_count); - si->mean_ec = si->ec_sum; - } + if (si->ec_count) + si->mean_ec = div_u64(si->ec_sum, si->ec_count); if (si->is_empty) ubi_msg("empty MTD device detected"); diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 8b89cc18ff0b..6b4d1ae891ae 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include "ubi.h" /** @@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int err; - uint64_t tmp; struct ubi_vtbl_record vtbl_rec; dbg_gen("clear update marker for volume %d", vol->vol_id); @@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, if (vol->vol_type == UBI_STATIC_VOLUME) { vol->corrupted = 0; - vol->used_bytes = tmp = bytes; - vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); - vol->used_ebs = tmp; + vol->used_bytes = bytes; + vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size, + &vol->last_eb_bytes); if (vol->last_eb_bytes) vol->used_ebs += 1; else @@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int i, err; - uint64_t tmp; dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes); ubi_assert(!vol->updating && !vol->changing_leb); @@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (!vol->upd_buf) return -ENOMEM; - tmp = bytes; - vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); - vol->upd_ebs += tmp; + vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); vol->upd_bytes = bytes; vol->upd_received = 0; return 0; @@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count) { - uint64_t tmp; int lnum, offs, err = 0, len, to_write = count; dbg_gen("write %d of %lld bytes, %lld already passed", @@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, if (ubi->ro_mode) return -EROFS; - tmp = vol->upd_received; - offs = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs); if (vol->upd_received + count > vol->upd_bytes) to_write = count = vol->upd_bytes - vol->upd_received; diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 22e1d7398fce..df5483562b7a 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -24,7 +24,7 @@ */ #include -#include +#include #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) int i, err, vol_id = req->vol_id, do_free = 1; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; - uint64_t bytes; dev_t dev; if (ubi->ro_mode) @@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; - bytes = req->bytes; - if (do_div(bytes, vol->usable_leb_size)) - vol->reserved_pebs = 1; - vol->reserved_pebs += bytes; + vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); /* Reserve physical eraseblocks */ if (vol->reserved_pebs > ubi->avail_pebs) { @@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) vol->used_bytes = (long long)vol->used_ebs * vol->usable_leb_size; } else { - bytes = vol->used_bytes; - vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); - vol->used_ebs = bytes; - if (vol->last_eb_bytes) + vol->used_ebs = div_u64_rem(vol->used_bytes, + vol->usable_leb_size, + &vol->last_eb_bytes); + if (vol->last_eb_bytes != 0) vol->used_ebs += 1; else vol->last_eb_bytes = vol->usable_leb_size; -- cgit v1.2.3 From 8c4c19f1367435afdc16ac122a2a95a4d6cff9f0 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 20 Jan 2009 17:48:02 +0200 Subject: UBI: remove unused variable Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9082768cc6c3..09a326ecd05b 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -380,7 +380,7 @@ static void free_user_volumes(struct ubi_device *ubi) */ static int uif_init(struct ubi_device *ubi) { - int i, err, do_free = 0; + int i, err; dev_t dev; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); @@ -427,13 +427,10 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); - do_free = 0; out_sysfs: ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: - if (do_free) - free_user_volumes(ubi); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); return err; -- cgit v1.2.3 From 36b477d005fbda29e7581c3cef7ee31a59d8970b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 20 Jan 2009 18:04:09 +0200 Subject: UBI: fix resource de-allocation GregKH asked to fix UBI which has fake device release method. Indeed, we have to free UBI device description object from the release method, because otherwise we'll oops is someone opens a UBI device sysfs file, then the device is removed, and he reads the file. With this fix, he will get -ENODEV instead of an oops. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 09a326ecd05b..4048db83aef6 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev, return ret; } -/* Fake "release" method for UBI devices */ -static void dev_release(struct device *dev) { } +static void dev_release(struct device *dev) +{ + struct ubi_device *ubi = container_of(dev, struct ubi_device, dev); + + kfree(ubi); +} /** * ubi_sysfs_init - initialize sysfs for an UBI device. @@ -944,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); + /* + * Get a reference to the device in order to prevent 'dev_release()' + * from freeing @ubi object. + */ + get_device(&ubi->dev); + uif_close(ubi); ubi_wl_close(ubi); free_internal_volumes(ubi); @@ -955,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) vfree(ubi->dbg_peb_buf); #endif ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); - kfree(ubi); + put_device(&ubi->dev); return 0; } -- cgit v1.2.3 From a5c7f4710fba334bf613d705f97b4471b36446f8 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 19 Mar 2008 22:02:40 +0100 Subject: firewire: insist on successive self ID complete events The whole topology code only works if the old and new topologies which are compared come from immediately successive self ID complete events. If there happened bus resets without self ID complete events in the meantime, or self ID complete events with invalid selfIDs, the topology comparison could identify nodes wrongly, or more likely just corrupt kernel memory or panic right away. We now discard all nodes of the old topology and treat all current nodes as new ones if the current self ID generation is not the previous one plus 1. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-topology.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c9be6e6948c4..e7520e4bd6bc 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card, struct fw_node *local_node; unsigned long flags; + /* + * If the selfID buffer is not the immediate successor of the + * previously processed one, we cannot reliably compare the + * old and new topologies. + */ + if ((generation & 0xff) != ((card->generation + 1) & 0xff) && + card->local_node != NULL) { + fw_notify("skipped bus generations, destroying all nodes\n"); + fw_destroy_nodes(card); + card->bm_retries = 0; + } + spin_lock_irqsave(&card->lock, flags); card->node_id = node_id; -- cgit v1.2.3 From 8cd0bbbdff7471163cc6a058be8b8610ddd01d6b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 24 Mar 2008 20:56:40 +0100 Subject: firewire: unnecessary BM delay after generation rollover Noticed by Jarod Wilson: The bus manager work was unnecessarily delayed each time the bus generation counter rolled over. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-card.c | 2 +- drivers/firewire/fw-topology.c | 2 +- drivers/firewire/fw-transaction.h | 9 +++++++++ 3 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 6bd91a15d5e6..17a80cecdc14 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work) root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); - if (card->bm_generation + 1 == generation || + if (is_next_generation(generation, card->bm_generation) || (card->bm_generation != generation && grace)) { /* * This first step is to figure out who is IRM and diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index e7520e4bd6bc..8dd6703b55cd 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -523,7 +523,7 @@ fw_core_handle_bus_reset(struct fw_card *card, * previously processed one, we cannot reliably compare the * old and new topologies. */ - if ((generation & 0xff) != ((card->generation + 1) & 0xff) && + if (!is_next_generation(generation, card->generation) && card->local_node != NULL) { fw_notify("skipped bus generations, destroying all nodes\n"); fw_destroy_nodes(card); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index c9ab12a15f6e..1d78e9cc5940 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -275,6 +275,15 @@ static inline void fw_card_put(struct fw_card *card) extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); +/* + * Check whether new_generation is the immediate successor of old_generation. + * Take counter roll-over at 255 (as per to OHCI) into account. + */ +static inline bool is_next_generation(int new_generation, int old_generation) +{ + return (new_generation & 0xff) == ((old_generation + 1) & 0xff); +} + /* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an -- cgit v1.2.3 From 3d36a0df3b473fb53531484df227f2da8bc7494b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Jan 2009 22:45:54 +0100 Subject: firewire: keep highlevel drivers attached during brief connection loss There are situations when nodes vanish from the bus and come back quickly thereafter: - When certain bus-powered hubs are plugged in, - when certain devices are plugged into 6-port hubs, - when certain disk enclosures are switched from self-power to bus power or vice versa and break the daisy chain during the transition, - when the user plugs a cable out and quickly plugs it back in, e.g. to reorder a daisy chain (works on Mac OS X if done quickly enough), - when certain hubs temporarily malfunction during high bus traffic. Until now, firewire-core reported affected nodes as lost to the highlevel drivers (firewire-sbp2 and userspace drivers). We now delay the destruction of device representations until after at least two seconds after the last bus reset. If a "new" device is detected in this period whose bus information block and root directory header match that of a device which is pending for deletion, we resurrect that device and send update calls to highlevel drivers. Signed-off-by: Stefan Richter --- drivers/firewire/fw-device.c | 121 +++++++++++++++++++++++++++++++++++-------- drivers/firewire/fw-device.h | 1 + 2 files changed, 100 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2af5a8d1e012..0925d91b2610 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -634,12 +635,38 @@ struct fw_device *fw_device_get_by_devt(dev_t devt) return device; } +/* + * These defines control the retry behavior for reading the config + * rom. It shouldn't be necessary to tweak these; if the device + * doesn't respond to a config rom read within 10 seconds, it's not + * going to respond at all. As for the initial delay, a lot of + * devices will be able to respond within half a second after bus + * reset. On the other hand, it's not really worth being more + * aggressive than that, since it scales pretty well; if 10 devices + * are plugged in, they're all getting read within one second. + */ + +#define MAX_RETRIES 10 +#define RETRY_DELAY (3 * HZ) +#define INITIAL_DELAY (HZ / 2) +#define SHUTDOWN_DELAY (2 * HZ) + static void fw_device_shutdown(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)) { + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + return; + } + + if (atomic_cmpxchg(&device->state, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) + return; + fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); @@ -647,6 +674,7 @@ static void fw_device_shutdown(struct work_struct *work) down_write(&fw_device_rwsem); idr_remove(&fw_device_idr, minor); up_write(&fw_device_rwsem); + fw_device_put(device); } @@ -654,25 +682,63 @@ static struct device_type fw_device_type = { .release = fw_device_release, }; +static void fw_device_update(struct work_struct *work); + /* - * These defines control the retry behavior for reading the config - * rom. It shouldn't be necessary to tweak these; if the device - * doesn't respond to a config rom read within 10 seconds, it's not - * going to respond at all. As for the initial delay, a lot of - * devices will be able to respond within half a second after bus - * reset. On the other hand, it's not really worth being more - * aggressive than that, since it scales pretty well; if 10 devices - * are plugged in, they're all getting read within one second. + * If a device was pending for deletion because its node went away but its + * bus info block and root directory header matches that of a newly discovered + * device, revive the existing fw_device. + * The newly allocated fw_device becomes obsolete instead. */ +static int lookup_existing_device(struct device *dev, void *data) +{ + struct fw_device *old = fw_device(dev); + struct fw_device *new = data; + struct fw_card *card = new->card; + int match = 0; + + down_read(&fw_device_rwsem); /* serialize config_rom access */ + spin_lock_irq(&card->lock); /* serialize node access */ + + if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && + atomic_cmpxchg(&old->state, + FW_DEVICE_GONE, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + struct fw_node *current_node = new->node; + struct fw_node *obsolete_node = old->node; + + new->node = obsolete_node; + new->node->data = new; + old->node = current_node; + old->node->data = old; + + old->max_speed = new->max_speed; + old->node_id = current_node->node_id; + smp_wmb(); /* update node_id before generation */ + old->generation = card->generation; + old->config_rom_retries = 0; + fw_notify("rediscovered device %s\n", dev_name(dev)); -#define MAX_RETRIES 10 -#define RETRY_DELAY (3 * HZ) -#define INITIAL_DELAY (HZ / 2) + PREPARE_DELAYED_WORK(&old->work, fw_device_update); + schedule_delayed_work(&old->work, 0); + + if (current_node == card->root_node) + fw_schedule_bm_work(card, 0); + + match = 1; + } + + spin_unlock_irq(&card->lock); + up_read(&fw_device_rwsem); + + return match; +} static void fw_device_init(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); + struct device *revived_dev; int minor, err; /* @@ -696,6 +762,15 @@ static void fw_device_init(struct work_struct *work) return; } + revived_dev = device_find_child(device->card->device, + device, lookup_existing_device); + if (revived_dev) { + put_device(revived_dev); + fw_device_release(&device->device); + + return; + } + device_initialize(&device->device); fw_device_get(device); @@ -734,9 +809,10 @@ static void fw_device_init(struct work_struct *work) * fw_node_event(). */ if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { - fw_device_shutdown(work); + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } else { if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " @@ -847,8 +923,8 @@ static void fw_device_refresh(struct work_struct *work) case REREAD_BIB_UNCHANGED: if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_device_update(work); @@ -879,8 +955,8 @@ static void fw_device_refresh(struct work_struct *work) create_units(device); if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_notify("refreshed device %s\n", dev_name(&device->device)); @@ -890,8 +966,9 @@ static void fw_device_refresh(struct work_struct *work) give_up: fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: - atomic_set(&device->state, FW_DEVICE_SHUTDOWN); - fw_device_shutdown(work); + atomic_set(&device->state, FW_DEVICE_GONE); + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); out: if (node_id == card->root_node->node_id) fw_schedule_bm_work(card, 0); @@ -995,9 +1072,9 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device = node->data; if (atomic_xchg(&device->state, - FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { + FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, 0); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } break; } diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index df51732608d9..8ef6ec2ca21c 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -28,6 +28,7 @@ enum fw_device_state { FW_DEVICE_INITIALIZING, FW_DEVICE_RUNNING, + FW_DEVICE_GONE, FW_DEVICE_SHUTDOWN, }; -- cgit v1.2.3 From 8f5140a6a0b1a9aa79585b0008e88c5d266c5c1d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 23 Jan 2009 12:57:20 +0000 Subject: uwb: lock rc->rsvs_lock with spin_lock_bh() rc->rsvs_lock may be taken in a timer so lock it with spin_lock_bh(). Signed-off-by: David Vrabel --- drivers/uwb/drp.c | 4 ++-- drivers/uwb/rsv.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c index 2b4f9406789d..4f5ca99a04b9 100644 --- a/drivers/uwb/drp.c +++ b/drivers/uwb/drp.c @@ -66,14 +66,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, } else dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n"); - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (rc->set_drp_ie_pending > 1) { rc->set_drp_ie_pending = 0; uwb_rsv_queue_update(rc); } else { rc->set_drp_ie_pending = 0; } - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /** diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index 886f977cd2ea..6b76f4bb4cc7 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -870,7 +870,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc) */ void uwb_rsv_sched_update(struct uwb_rc *rc) { - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (!delayed_work_pending(&rc->rsv_update_work)) { if (rc->set_drp_ie_pending > 0) { rc->set_drp_ie_pending++; @@ -879,7 +879,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc) uwb_rsv_queue_update(rc); } unlock: - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /* -- cgit v1.2.3 From b006854955254a971096c120d4ef115a7c6145fb Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 5 Jan 2009 20:43:23 +0100 Subject: firewire: ohci: change "context_stop: still active" log message The present message is mostly just noise. We only need to be notified if the "active" flag does not go off before the retry loop terminates. Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index ab9c01e462ef..9bedd6159f28 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -896,11 +896,11 @@ static void context_stop(struct context *ctx) for (i = 0; i < 10; i++) { reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs)); if ((reg & CONTEXT_ACTIVE) == 0) - break; + return; - fw_notify("context_stop: still active (0x%08x)\n", reg); mdelay(1); } + fw_error("Error: DMA context still active (0x%08x)\n", reg); } struct driver_data { -- cgit v1.2.3 From 8b7b6afaa84708d08139daa08538ca3e56c351f1 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 20 Jan 2009 19:10:58 +0100 Subject: firewire: ohci: increase AT req. retries, fix ack_busy_X from Panasonic camcorders and others Camcorders have a tendency to fail read requests to their config ROM and write request to their FCP command register with ack_busy_X. This has become a problem with newer kernels and especially Panasonic camcorders, causing AV/C in dvgrab and kino to fail. Dvgrab for example frequently logs "send oops"; kino reports loss of AV/C control. I suspect that lower CPU scheduling latencies in newer kernels made this issue more prominent now. According to https://sourceforge.net/tracker/?func=detail&atid=114103&aid=2492640&group_id=14103 this can be fixed by configuring the FireWire controller for more hardware retries for request transmission; these retries are evidently more successful than libavc1394's own retry loop (typically 3 tries on top of hardware retries). Presumably the same issue has been reported at https://bugzilla.redhat.com/show_bug.cgi?id=449252 and https://bugzilla.redhat.com/show_bug.cgi?id=477279 . In a quick test with a JVC camcorder (which didn't malfunction like the reported camcorders), this change decreased the number of ack_busy_X from 16 in three runs of dvgrab to 4 in three runs of the same capture duration. Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 9bedd6159f28..6d19828a93a5 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) #define CONTEXT_DEAD 0x0800 #define CONTEXT_ACTIVE 0x0400 -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 -- cgit v1.2.3 From 64c634ef83991b390ec0503e61f16efb0ba3c60b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 20 Jan 2009 19:09:58 +0100 Subject: ieee1394: ohci1394: increase AT req. retries, fix ack_busy_X from Panasonic camcorders and others Camcorders have a tendency to fail read requests to their config ROM and write request to their FCP command register with ack_busy_X. This has become a problem with newer kernels and especially Panasonic camcorders, causing AV/C in dvgrab and kino to fail. Dvgrab for example frequently logs "send oops"; kino reports loss of AV/C control. I suspect that lower CPU scheduling latencies in newer kernels made this issue more prominent now. According to https://sourceforge.net/tracker/?func=detail&atid=114103&aid=2492640&group_id=14103 this can be fixed by configuring the FireWire controller for more hardware retries for request transmission; these retries are evidently more successful than libavc1394's own retry loop (typically 3 tries on top of hardware retries). Presumably the same issue has been reported at https://bugzilla.redhat.com/show_bug.cgi?id=449252 and https://bugzilla.redhat.com/show_bug.cgi?id=477279 . Tested-by: Mathias Beilstein Signed-off-by: Stefan Richter --- drivers/ieee1394/ohci1394.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h index 4320bf010495..7fb8ab9780ae 100644 --- a/drivers/ieee1394/ohci1394.h +++ b/drivers/ieee1394/ohci1394.h @@ -26,7 +26,7 @@ #define OHCI1394_DRIVER_NAME "ohci1394" -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 #define OHCI1394_MAX_SELF_ID_ERRORS 16 -- cgit v1.2.3 From e747a5c0be3efe5465e45c8e326bc766b1288be6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 20:35:38 +0100 Subject: firewire: core: optimize card shutdown This fixes a regression by "firewire: keep highlevel drivers attached during brief connection loss": There were 2 seconds unnecessary waiting added to the shutdown procedure of each controller. We use card->link as status flag to signal the device handler that there is no use to wait for a come-back. Signed-off-by: Stefan Richter --- drivers/firewire/fw-card.c | 2 +- drivers/firewire/fw-device.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 17a80cecdc14..7be2cf3514e7 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -512,7 +512,7 @@ fw_core_remove_card(struct fw_card *card) fw_core_initiate_bus_reset(card, 1); mutex_lock(&card_mutex); - list_del(&card->link); + list_del_init(&card->link); mutex_unlock(&card_mutex); /* Set up the dummy driver. */ diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 0925d91b2610..bf53acb45652 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -657,7 +657,8 @@ static void fw_device_shutdown(struct work_struct *work) container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); - if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)) { + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY) + && !list_empty(&device->card->link)) { schedule_delayed_work(&device->work, SHUTDOWN_DELAY); return; } @@ -1074,7 +1075,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) if (atomic_xchg(&device->state, FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + schedule_delayed_work(&device->work, + list_empty(&card->link) ? 0 : SHUTDOWN_DELAY); } break; } -- cgit v1.2.3 From 2f5899a39dcffb404c9a3d06ad438aff3e03bf04 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 16 Jan 2009 12:36:51 -0600 Subject: [SCSI] libiscsi: fix iscsi pool leak I am not sure what happened. It looks like we have always leaked the q->queue that is allocated from the kfifo_init call. nab finally noticed that we were leaking and this patch fixes it by adding a kfree call to iscsi_pool_free. kfifo_free is not used per kfifo_init's instructions to use kfree. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7225b6e2029e..257c24115de9 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1981,6 +1981,7 @@ void iscsi_pool_free(struct iscsi_pool *q) kfree(q->pool[i]); if (q->pool) kfree(q->pool); + kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); -- cgit v1.2.3 From 41bbdbebbbe7e06871d25f51c2eb1d6466bb9e5f Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 16 Jan 2009 12:36:52 -0600 Subject: [SCSI] qla4xxx: do not reuse session when connecting to different target port qla4xxx does not check the I_T nexus values correctly so it ends up creating one session to the target. If a portal should disappear or they should be reported in different order the driver will think it is already logged in when it could now be speaking to a different target portal or accessing it through a different initiator port (iscsi initiator port is not tied to hardware and is just the initiator name plus isid so you could end up with multiple ports through one host). This patch has the driver check the iscsi scsi port values when matching sessions (we do not check the initiator name because that is static). It results in a portal from each target portal group getting logged into instead of just one per target. In the future the firmware should hopefully send us notification of other sessions that are created to other portals within the same tpgt and the sessions should have different isids. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 1 + drivers/scsi/qla4xxx/ql4_init.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index d6be0762eb91..b586f27c3bd4 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -244,6 +244,7 @@ struct ddb_entry { uint8_t ip_addr[ISCSI_IPADDR_SIZE]; uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */ uint8_t iscsi_alias[0x20]; + uint8_t isid[6]; }; /* diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 109c5f5985ec..af8c3233e8ae 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -342,8 +342,12 @@ static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha, DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no, __func__, fw_ddb_index)); list_for_each_entry(ddb_entry, &ha->ddb_list, list) { - if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, - ISCSI_NAME_SIZE) == 0) { + if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, + ISCSI_NAME_SIZE) == 0) && + (ddb_entry->tpgt == + le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) && + (memcmp(ddb_entry->isid, fw_ddb_entry->isid, + sizeof(ddb_entry->isid)) == 0)) { found++; break; } @@ -430,6 +434,8 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, ddb_entry->port = le16_to_cpu(fw_ddb_entry->port); ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid)); + memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], min(sizeof(ddb_entry->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); -- cgit v1.2.3 From 6e9f21f3d3d4933087d1e13b04667b6eb663b487 Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Thu, 22 Jan 2009 09:45:28 -0800 Subject: [SCSI] qla2xxx: Fix memory leak in error path Reviewed-by: Hisashi Hifumi Signed-off-by: Anirban Chakraborty Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index cf32653fe01a..185ea8bcb9e2 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1888,6 +1888,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "[ERROR] Failed to allocate memory for scsi_host\n"); ret = -ENOMEM; + qla2x00_mem_free(ha); + qla2x00_free_que(ha, req, rsp); goto probe_hw_failed; } @@ -1917,14 +1919,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_failed; - + goto probe_init_failed; /* Alloc arrays of request and response ring ptrs */ if (!qla2x00_alloc_queues(ha)) { qla_printk(KERN_WARNING, ha, "[ERROR] Failed to allocate memory for queue" " pointers\n"); - goto probe_failed; + goto probe_init_failed; } ha->rsp_q_map[0] = rsp; ha->req_q_map[0] = req; @@ -1997,6 +1998,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; +probe_init_failed: + qla2x00_free_que(ha, req, rsp); + ha->max_queues = 0; + probe_failed: qla2x00_free_device(base_vha); -- cgit v1.2.3 From 85d0acbb2e64cee4d3253ea9ce4650658e05d945 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:29 -0800 Subject: [SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger flash parts. Also removes unneeded 'findex' local variable within routine. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 303f8ee11f25..afec7f90f58a 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -982,7 +982,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, int ret; uint32_t liter, miter; uint32_t sec_mask, rest_addr; - uint32_t fdata, findex; + uint32_t fdata; dma_addr_t optrom_dma; void *optrom = NULL; uint32_t *s, *d; @@ -1003,17 +1003,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, } rest_addr = (ha->fdt_block_size >> 2) - 1; - sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2); + sec_mask = ~rest_addr; qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - - findex = faddr; - fdata = (findex & sec_mask) << 2; + fdata = (faddr & sec_mask) << 2; /* Are we at the beginning of a sector? */ - if ((findex & rest_addr) == 0) { + if ((faddr & rest_addr) == 0) { /* Do sector unprotect. */ if (ha->fdt_unprotect_sec_cmd) qla24xx_write_flash_dword(ha, -- cgit v1.2.3 From 09ff36d30c27ee23b50ffb419c80a0aaef1db4a0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:30 -0800 Subject: [SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs. Original code should work as well given qla24xx_reset_adapter() is only called in extreme cases where the HBA is taken offline. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9ad4d0968e5c..da9700fbc470 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); RD_REG_DWORD(®->hccr); spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /* On sparc systems, obtain port and node WWN from firmware -- cgit v1.2.3 From 8eca3f39c4b11320787f7b216f63214aee8415a9 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:31 -0800 Subject: [SCSI] qla2xxx: Always serialize mailbox command execution. Original code would incorrectly bypass serialization if the DPC thread were performing a big-hammer operation (ISP abort). This short circuit, though rare, would subsequently stomp on a secondary thread's mailbox command execution. Found during ISP81XX testing. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index db4df45234a5..f94ffbb98e95 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) * seconds. This is to serialize actual issuing of mailbox cmds during * non ISP abort time. */ - if (!abort_active) { - if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, - mcp->tov * HZ)) { - /* Timeout occurred. Return error. */ - DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " - "Exiting.\n", __func__, base_vha->host_no)); - return QLA_FUNCTION_TIMEOUT; - } + if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { + /* Timeout occurred. Return error. */ + DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; } ha->flags.mbox_busy = 1; @@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } /* Allow next mbx cmd to come in. */ - if (!abort_active) - complete(&ha->mbx_cmd_comp); + complete(&ha->mbx_cmd_comp); if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " -- cgit v1.2.3 From eaac30be268b90e9288b3945fb5cc9ee8c5397c0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:32 -0800 Subject: [SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts. Pre-ISP81XX parts (including ISP24xx and ISP25xx) could contain a firmware image within a segment of flash, driver would fallback to loading this firmware if the request-firmware interface failed (userspace .bin file). Moving forward, all ISP81XX parts will ship with a suggested-to-be-used firmware image within flash which all driver should first attempt to load. If the flash firmware load fails, the driver will then fallback to loading firmware via the request-firmware interface (ql8100_fw.bin). Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 50 ++++++++++++++++++++++++++++++++++++----- drivers/scsi/qla2xxx/qla_os.c | 2 +- 3 files changed, 46 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ba4913353752..a336b4bc81a7 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern void qla81xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); +extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *); extern int qla2x00_loop_resync(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index da9700fbc470..f6368a1d3021 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3850,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr) uint32_t i; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + + qla_printk(KERN_INFO, ha, + "FW: Loading from flash (%x)...\n", ha->flt_region_fw); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4025,8 +4029,8 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } -int -qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +static int +qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -4046,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) qla_printk(KERN_ERR, ha, "Firmware images can be retrieved " "from: " QLA_FW_URL ".\n"); - /* Try to load RISC code from flash. */ - qla_printk(KERN_ERR, ha, "Attempting to load (potentially " - "outdated) firmware from flash.\n"); - return qla24xx_load_risc_flash(vha, srisc_addr); + return QLA_FUNCTION_FAILED; } + qla_printk(KERN_INFO, ha, + "FW: Loading via request-firmware...\n"); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4136,6 +4140,40 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } +int +qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware via request-firmware interface (.bin file). + * 2) Firmware residing in flash. + */ + rval = qla24xx_load_risc_blob(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_flash(vha, srisc_addr); +} + +int +qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + rval = qla24xx_load_risc_flash(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_blob(vha, srisc_addr); +} + void qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) { diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 185ea8bcb9e2..cbf377fddbd3 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1480,7 +1480,7 @@ static struct isp_operations qla81xx_isp_ops = { .reset_adapter = qla24xx_reset_adapter, .nvram_config = qla81xx_nvram_config, .update_fw_options = qla81xx_update_fw_options, - .load_risc = qla24xx_load_risc, + .load_risc = qla81xx_load_risc, .pci_info_str = qla24xx_pci_info_str, .fw_version_str = qla24xx_fw_version_str, .intr_handler = qla24xx_intr_handler, -- cgit v1.2.3 From ad038fa8242a1f4547045f9213c3881a34bbcc21 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Thu, 22 Jan 2009 09:45:33 -0800 Subject: [SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 789fc576f222..e28ad81baf1e 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha) static int qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) { +#define MIN_MSIX_COUNT 2 int i, ret; struct msix_entry *entries; struct qla_msix_entry *qentry; @@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { + if (ret < MIN_MSIX_COUNT) + goto msix_failed; + qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable support -- %d/%d\n" " Retry with %d vectors\n", ha->msix_count, ret, ret); ha->msix_count = ret; ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { +msix_failed: qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable" " support, giving up -- %d/%d\n", ha->msix_count, ret); -- cgit v1.2.3 From 7c283177fad8786afa1bbf7ef848038284084e41 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:34 -0800 Subject: [SCSI] qla2xxx: Correct endianness issue during flash manipulation. The flash data was incorrectly being converted (cpu_to_le32()) when using the bulk-flash-write mailbox command (ISP25xx and above). Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index afec7f90f58a..ed9582603afa 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, uint32_t dwords) { int ret; - uint32_t liter, miter; + uint32_t liter; uint32_t sec_mask, rest_addr; uint32_t fdata; dma_addr_t optrom_dma; void *optrom = NULL; - uint32_t *s, *d; struct qla_hw_data *ha = vha->hw; ret = QLA_SUCCESS; @@ -1031,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, /* Go with burst-write. */ if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { /* Copy data to DMA'ble buffer. */ - for (miter = 0, s = optrom, d = dwptr; - miter < OPTROM_BURST_DWORDS; miter++, s++, d++) - *s = cpu_to_le32(*d); + memcpy(optrom, dwptr, OPTROM_BURST_SIZE); ret = qla2x00_load_ram(vha, optrom_dma, flash_data_addr(ha, faddr), -- cgit v1.2.3 From 2ac4b64f7483f3684a423b21ac4e687827f7eb62 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:35 -0800 Subject: [SCSI] qla2xxx: Correct regression in EH abort handling. Commit 73208dfd7ab19f379d73e8a0fbf30f92c203e5e8 (qla2xxx: add support for multi-queue adapter) inadvertently backed-out the fix in 5bff55db3dc4d659f46b4d2fce2f61c1964c2762 (qla2xxx: Return a FAILED status when abort mailbox-command fails.). Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index cbf377fddbd3..f344b6816fd3 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -800,6 +800,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(vha, sp, req)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, vha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, vha->host_no)); -- cgit v1.2.3 From b872ca4081c480e3d76443282ffd7f206321f50f Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Thu, 22 Jan 2009 09:45:36 -0800 Subject: [SCSI] qla2xxx: Correct descriptions in flash manipulation routines. When clearing the flash device's SR, the comment is incorrect... clearing the SR is 2 steps: 1. the SR protect bit is 1, so the first write zero clears only that bit, 2. the SR protect bit is now 0, so the next write zero clears the remaining bits. The sector erase debug print more correctly identifies that the erase failed. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index ed9582603afa..9c3b694c049d 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha) if (!ha->fdt_wrt_disable) return; - /* Disable flash write-protection. */ + /* Disable flash write-protection, first clear SR protection bit */ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); - /* Some flash parts need an additional zero-write to clear bits.*/ + /* Then write zero again to clear remaining SR bits.*/ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); } @@ -1021,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, (fdata & 0xff00) |((fdata << 16) & 0xff0000) | ((fdata >> 16) & 0xff)); if (ret != QLA_SUCCESS) { - DEBUG9(qla_printk("Unable to flash sector: " + DEBUG9(qla_printk("Unable to erase sector: " "address=%x.\n", faddr)); break; } -- cgit v1.2.3 From 53303c42d5a148a73b201a04c89e371d4d5a150f Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:37 -0800 Subject: [SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations. Jeremy Higdon noted (http://marc.info/?l=linux-scsi&m=123262143131788&w=2) that the rework done in commit e315cd28b9ef0d7b71e462ac16e18dbaa2f5adfe was not setting the proper consistent and streaming DMA masks prior to memory allocations. Correct this and remove the unnecessary prototype. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index f344b6816fd3..c11f872d3e10 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging, static void qla2x00_free_device(scsi_qla_host_t *); -static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); - int ql2xfdmienable=1; module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xfdmienable, @@ -1242,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type) * supported addressing method. */ static void -qla2x00_config_dma_addressing(scsi_qla_host_t *vha) +qla2x00_config_dma_addressing(struct qla_hw_data *ha) { - struct qla_hw_data *ha = vha->hw; /* Assume a 32bit DMA mask. */ ha->flags.enable_64bit_addressing = 0; @@ -1870,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) set_bit(0, (unsigned long *) ha->vp_idx_map); + qla2x00_config_dma_addressing(ha); ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); if (!ret) { qla_printk(KERN_WARNING, ha, @@ -1896,8 +1894,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, base_vha); - qla2x00_config_dma_addressing(base_vha); - host = base_vha->host; base_vha->req_ques[0] = req->id; host->can_queue = req->length + 128; -- cgit v1.2.3 From 3c01b4f9fbb43fc911acd33ea7a14ea7a4f9866b Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Thu, 22 Jan 2009 09:45:38 -0800 Subject: [SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks. Commit f78badb1ae07e7f8b835ab2ea0b456ed3fc4caf4 ([SCSI] fc transport: pre-emptively terminate i/o upon dev_loss_tmo timeout) changed the callback semantics of dev_loss_tmo and terminate_rport_io such that repeated calls could be made. This could result in the the driver using stale (NULLed-out, in dev_loss_tmo) data from the rport. Correct this by addint a simple check to ensure a valid fcport is attached. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index c7acef50d5da..33a3c13fd893 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) struct Scsi_Host *host = rport_to_shost(rport); fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + qla2x00_abort_fcport_cmds(fcport); /* @@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) { fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + /* * At this point all fcport's software-states are cleared. Perform any * final cleanup of firmware resources (PCBs and XCBs). -- cgit v1.2.3 From f9932deb9900789ee0b5739c118f850d62e3b9b1 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 22 Jan 2009 09:45:39 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.03.00-k2. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 808bab6ef06b..cfa4c11a4797 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k1" +#define QLA2XXX_VERSION "8.03.00-k2" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- cgit v1.2.3 From 64b840dd88eb2054f86c72ed6d989cb8681f0058 Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 22 Jan 2009 15:45:38 -0600 Subject: [SCSI] ibmvfc: Fix DMA mapping leak on memory allocation failure There is currently a DMA mapping leak that can occur in the ibmvfc driver if we fail to allocate a scatterlist. Fix this by unmapping the scatterlist in the failure path. Additionally, only log an error for a scatterlist allocation failure if the log level is greater than the default, since this can occur when running Active Memory Sharing and this is not considered an error. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvfc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 91ef669d98f6..a1a511bdec8c 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1322,7 +1322,9 @@ static int ibmvfc_map_sg_data(struct scsi_cmnd *scmd, &evt->ext_list_token); if (!evt->ext_list) { - scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); + scsi_dma_unmap(scmd); + if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL) + scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); return -ENOMEM; } } -- cgit v1.2.3 From 80ee6f54f51ffc623843dd8955248d4fab064b99 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 23 Jan 2009 14:12:59 +0900 Subject: libata-sff: fix incorrect EH message The EH message for NODEV_HINT path was describing the opposite condition. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- arch/arm/mach-integrator/clock.h | 0 drivers/ata/libata-sff.c | 2 +- 2 files changed, 1 insertion(+), 1 deletion(-) delete mode 100644 arch/arm/mach-integrator/clock.h (limited to 'drivers') diff --git a/arch/arm/mach-integrator/clock.h b/arch/arm/mach-integrator/clock.h deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 5a4aad123c42..0a8567c48d97 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1322,7 +1322,7 @@ fsm_start: * condition. Mark hint. */ ata_ehi_push_desc(ehi, "ST-ATA: " - "DRQ=1 with device error, " + "DRQ=0 without device error, " "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; -- cgit v1.2.3 From b919930c34e99a48d6b13a5ec9db8c059ec44d72 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 25 Jan 2009 10:26:00 +0900 Subject: libata: set NODEV_HINT for 0x7f status Asus Pundit-R with atiixp controller has the second port missing and, very unusually, its status is stuck at 0x7f and all others at 0. This meanst that it fails TF access test but gets detected as a disk due to classification code check and then evades polling IDENTIFY presence detection thanks to the missing BSY in the status value causing excessive delays during boot. This patch makes libata-sff HSM set NODEV_HINT if the status is 0x7f to make polling IDENTIFY presence detection work for these machines. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 0a8567c48d97..0b299b0f8172 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1358,6 +1358,16 @@ fsm_start: qc->err_mask |= AC_ERR_HSM; } + /* There are oddball controllers with + * status register stuck at 0x7f and + * lbal/m/h at zero which makes it + * pass all other presence detection + * mechanisms we have. Set NODEV_HINT + * for it. Kernel bz#7241. + */ + if (status == 0x7f) + qc->err_mask |= AC_ERR_NODEV_HINT; + /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state * is changed after ata_pio_sectors(). -- cgit v1.2.3 From e8caa3c70e94d867ca2efe9e53fd388b52d6d0c8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 25 Jan 2009 11:25:22 +0900 Subject: sata_nv: rename nv_nf2_hardreset() nv_nf2_hardreset() will be used by other flavors too. Rename it to nv_noclassify_hardreset(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6f1460614325..93bf5855a9b5 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); static int nv_adma_slave_config(struct scsi_device *sdev); @@ -432,7 +432,7 @@ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_nf2_hardreset, + .hardreset = nv_noclassify_hardreset, }; /* CK804 finally gets hardreset right */ @@ -1530,6 +1530,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + bool online; + int rc; + + rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + &online, NULL); + return online ? -EAGAIN : rc; +} + static void nv_nf2_freeze(struct ata_port *ap) { void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; @@ -1554,17 +1565,6 @@ static void nv_nf2_thaw(struct ata_port *ap) iowrite8(mask, scr_addr + NV_INT_ENABLE); } -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - bool online; - int rc; - - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; -} - static void nv_ck804_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; -- cgit v1.2.3 From 2d775708bc6613f1be47f1e720781343341ecc94 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 25 Jan 2009 11:29:38 +0900 Subject: sata_nv: fix MCP5x reset MCP5x family of controllers seem to share much more with nf2's as far as reset protocol is concerned. It requires heardreset to get the PHY going and classfication code report after hardreset is unreliable. Create a new board type MCP5x and use noclassify hardreset. SWNCQ is modified to inherit from this new type. This fixes hotplug regression reported in kernel bz#12351. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 93bf5855a9b5..c49ad0e61b6f 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -352,6 +352,7 @@ enum nv_host_type NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ CK804, ADMA, + MCP5x, SWNCQ, }; @@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, @@ -467,8 +468,19 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; +/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to + * work, hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. Define separate ops for mcp5x with + * nv_noclassify_hardreset(). + */ +static struct ata_port_operations nv_mcp5x_ops = { + .inherits = &nv_common_ops, + .hardreset = nv_noclassify_hardreset, +}; + static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_mcp5x_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -531,6 +543,15 @@ static const struct ata_port_info nv_port_info[] = { .port_ops = &nv_adma_ops, .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht), }, + /* MCP5x */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_mcp5x_ops, + .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), + }, /* SWNCQ */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | @@ -2355,14 +2376,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (type == CK804 && adma_enabled) { dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n"); type = ADMA; - } - - if (type == SWNCQ) { - if (swncq_enabled) - dev_printk(KERN_NOTICE, &pdev->dev, - "Using SWNCQ mode\n"); - else - type = GENERIC; + } else if (type == MCP5x && swncq_enabled) { + dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n"); + type = SWNCQ; } ppi[0] = &nv_port_info[type]; -- cgit v1.2.3 From b0bccb18bc523d1d5060d25958f12438062829a9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 19 Jan 2009 18:04:37 -0500 Subject: sata_mv: fix 8-port timeouts on 508x/6081 chips Fix a longstanding bug for the 8-port Marvell Sata controllers (508x/6081), where accesses to the upper 4 ports would cause lost-interrupts / timeouts for the lower 4-ports. With this patch, the 6081 boards should finally be reliable enough for mainstream use with Linux. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 86918634a4c5..ce9d6ad5a64f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -883,7 +883,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, struct mv_host_priv *hpriv = ap->host->private_data; int hardport = mv_hardport_from_port(ap->port_no); void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), hardport); + mv_host_base(ap->host), ap->port_no); u32 hc_irq_cause, ipending; /* clear EDMA event indicators, if any */ -- cgit v1.2.3 From cae6edc3b5a536119374a5439d9b253cb26f05e1 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 19 Jan 2009 18:05:42 -0500 Subject: sata_mv: don't read hc_irq_cause Remove silly read-modify-write sequences when clearing interrupts in hc_irq_cause. This gets rid of unneeded MMIO reads, resulting in a slight performance boost when switching between EDMA and non-EDMA modes (eg. for cache flushes). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index ce9d6ad5a64f..68096289074b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -35,8 +35,6 @@ * * --> Investigate problems with PCI Message Signalled Interrupts (MSI). * - * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead. - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -884,18 +882,14 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, int hardport = mv_hardport_from_port(ap->port_no); void __iomem *hc_mmio = mv_hc_base_from_port( mv_host_base(ap->host), ap->port_no); - u32 hc_irq_cause, ipending; + u32 hc_irq_cause; /* clear EDMA event indicators, if any */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear EDMA interrupt indicator, if any */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - ipending = (DEV_IRQ | DMA_IRQ) << hardport; - if (hc_irq_cause & ipending) { - writelfl(hc_irq_cause & ~ipending, - hc_mmio + HC_IRQ_CAUSE_OFS); - } + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_edma_cfg(ap, want_ncq); @@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap) writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); /* clear pending irq events */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport); + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_enable_port_irqs(ap, ERR_IRQ); -- cgit v1.2.3 From cd12e1f7a2c28917c89d65c0d4a52d3919b4c125 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 19 Jan 2009 18:06:28 -0500 Subject: sata_mv: remove bogus nsect restriction Remove unneeded nsect restriction from GenII NCQ path, and improve comments to explain why this is not a problem. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 68096289074b..874b60b2e20f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -349,8 +349,6 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */ - /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -1093,20 +1091,12 @@ static void mv6_dev_config(struct ata_device *adev) * * Gen-II does not support NCQ over a port multiplier * (no FIS-based switching). - * - * We don't have hob_nsect when doing NCQ commands on Gen-II. - * See mv_qc_prep() for more info. */ if (adev->flags & ATA_DFLAG_NCQ) { if (sata_pmp_attached(adev->link->ap)) { adev->flags &= ~ATA_DFLAG_NCQ; ata_dev_printk(adev, KERN_INFO, "NCQ disabled for command-based switching\n"); - } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) { - adev->max_sectors = GEN_II_NCQ_MAX_SECTORS; - ata_dev_printk(adev, KERN_INFO, - "max_sectors limited to %u for NCQ\n", - adev->max_sectors); } } } @@ -1444,7 +1434,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * only 11 bytes...so we must pick and choose required * registers based on the command. So, we drop feature and * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. + * NCQ. NCQ will drop hob_nsect, which is not needed there + * (nsect is used only for the tag; feat/hob_feat hold true nsect). */ switch (tf->command) { case ATA_CMD_READ: -- cgit v1.2.3 From 5d0fb2e730e2085021cf5c8b6d14983e92aea75b Mon Sep 17 00:00:00 2001 From: Thomas Reitmayr Date: Sat, 24 Jan 2009 20:24:58 +0100 Subject: sata_mv: Properly initialize main irq mask I noticed that during initialization sata_mv.c assumes that the main interrupt mask has its default value of 0. The function mv_platform_probe(..) initializes a shadow irq mask with 0 assuming that's the value of the controller's register. Now mv_set_main_irq_mask(..) only writes the controller's register if the new value differs from the "shadowed" value. This is fatal when trying to disable all interrupts in mv_init_host(..), i.e. the following function call does not write anything to the main irq mask register: mv_set_main_irq_mask(host, ~0, 0); The effect I see on my machine (QNAP TS-109 II) with booting via kexec (with Linux as a 2nd-stage boot loader) is that if the sata_mv module was still loaded when performing kexec, then the new kernel's sata_mv module starts up with interrupts enabled. This results in an unhandled IRQ and breaks the boot process. The unhandled interrupt itself might also be fixed by Lennert's patch proposed at http://markmail.org/message/kwvzxstnlsa3s26w which I did not try yet. However I still propose to additionally initialize the shadow variable with the current contents of the main irq mask register to get both in sync and allow proper disabling the main irq mask. This fixes the unhandled irq on my machine. Signed-off-by: Thomas Reitmayr Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 874b60b2e20f..9e9fb9594781 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3059,6 +3059,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } + /* initialize shadow irq mask with register's value */ + hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); + /* global interrupt mask: 0 == mask everything */ mv_set_main_irq_mask(host, ~0, 0); -- cgit v1.2.3 From 6d3c30efc964fadf2e6270e6fceaeca3ce50027a Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 21 Jan 2009 10:31:29 -0500 Subject: sata_mv: msi masking fix (v2) Enable reliable use of Message-Signaled Interrupts (MSI) in sata_mv by masking further chip interrupts within the main interrupt handler. Based upon a suggestion by Grant Grundler. MSI is working reliably in all of my test systems here now. Signed-off-by: Mark Lord Reviewed-by: Grant Grundler Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 9e9fb9594781..f2d8a020ea53 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -33,8 +33,6 @@ * * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). * - * --> Investigate problems with PCI Message Signalled Interrupts (MSI). - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -70,7 +68,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.24" +#define DRV_VERSION "1.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2199,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) struct ata_host *host = dev_instance; struct mv_host_priv *hpriv = host->private_data; unsigned int handled = 0; + int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; u32 main_irq_cause, pending_irqs; spin_lock(&host->lock); + + /* for MSI: block new interrupts while in here */ + if (using_msi) + writel(0, hpriv->main_irq_mask_addr); + main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; /* @@ -2215,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) handled = mv_host_intr(host, pending_irqs); } spin_unlock(&host->lock); + + /* for MSI: unmask; interrupt cause bits will retrigger now */ + if (using_msi) + writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + return IRQ_RETVAL(handled); } @@ -3417,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev)) - pci_intx(pdev, 1); + /* Enable message-switched interrupts, if requested */ + if (msi && pci_enable_msi(pdev) == 0) + hpriv->hp_flags |= MV_HP_FLAG_MSI; mv_dump_pci_cfg(pdev, 0x68); mv_print_info(host); -- cgit v1.2.3 From f9228c7ffaaa37521c46239ccea623f10fa44a27 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 21 Jan 2009 10:34:17 -0500 Subject: sata_mv: no longer experimental (v2) Update Kconfig for sata_mv with full list of chips supported, and (finally!) remove the "EXPERIMENTAL" designations. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 503a908afc80..0bcf26464670 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -112,11 +112,11 @@ config ATA_PIIX If unsure, say N. config SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Marvell SATA support" help This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. If unsure, say N. -- cgit v1.2.3 From e4d866cdea24543ee16ce6d07d80c513e86ba983 Mon Sep 17 00:00:00 2001 From: "JosephChan@via.com.tw" Date: Fri, 23 Jan 2009 15:37:39 +0800 Subject: [libata] pata_via: support VX855, future chips whose IDE controller use 0x0571 It supports VX855 and future chips whose IDE controller uses PCI ID 0x0571. Signed-off-by: Joseph Chan Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_via.c | 22 +++++++++++++++++----- include/linux/pci_ids.h | 4 ++++ 2 files changed, 21 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 681169c9c640..79a6c9a0b721 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -86,6 +86,10 @@ enum { VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ }; +enum { + VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */ +}; + /* * VIA SouthBridge chips. */ @@ -97,8 +101,12 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, @@ -122,6 +130,8 @@ static const struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { NULL } }; @@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; u8 enable; u32 timing; + unsigned long flags = id->driver_data; int rc; if (!printed_version++) @@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + if (flags & VIA_IDFLAG_SINGLE) + ppi[1] = &ata_dummy_port_info; + /* To find out how the IDE will behave and what features we actually have to look at the bridge not the IDE controller */ - for (config = via_isa_bridges; config->id; config++) + for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON; + config++) if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(config->flags & VIA_BAD_ID), config->id, NULL))) { @@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_dev_put(isa); } - if (!config->id) { - printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); - return -ENODEV; - } pci_dev_put(isa); if (!(config->flags & VIA_NO_ENABLES)) { @@ -587,6 +598,7 @@ static const struct pci_device_id via[] = { { PCI_VDEVICE(VIA, 0x1571), }, { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, { }, }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d56ad9c21c09..febc10ed3858 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1357,6 +1357,7 @@ #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_8251 0x3287 +#define PCI_DEVICE_ID_VIA_8261 0x3402 #define PCI_DEVICE_ID_VIA_8237A 0x3337 #define PCI_DEVICE_ID_VIA_8237S 0x3372 #define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324 @@ -1366,10 +1367,13 @@ #define PCI_DEVICE_ID_VIA_CX700 0x8324 #define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581 #define PCI_DEVICE_ID_VIA_VX800 0x8353 +#define PCI_DEVICE_ID_VIA_VX855 0x8409 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 #define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 +#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409 +#define PCI_DEVICE_ID_VIA_ANON 0xFFFF #define PCI_VENDOR_ID_SIEMENS 0x110A #define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 -- cgit v1.2.3 From 26a4bc66a6f57299027e04d90b14fe56a44c6d2b Mon Sep 17 00:00:00 2001 From: John Adamson Date: Fri, 22 Aug 2008 16:43:49 +1000 Subject: m68knommu: fix ColdFire 5272 serial baud rates in mcf.c I noticed (the hard way) that the mcf.c driver doesn't support the fractional precision register on the MCF5272. This makes the console dicey at 115200 baud and a system clock of 66.0 MHz. On the other hand, if your hardware is running at 66.666 MHz, it probably isn't a problem. Patch submitted by John Adamson Signed-off-by: Greg Ungerer --- drivers/serial/mcf.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index b2001c5b145c..56841fe5f483 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, { unsigned long flags; unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif unsigned char mr1, mr2; baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; mr2 = 0; @@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, writeb(mr2, port->membase + MCFUART_UMR); writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, port->membase + MCFUART_UCSR); writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, -- cgit v1.2.3 From d4732d3c59b84bb093e11c8f755f32801b4bf86d Mon Sep 17 00:00:00 2001 From: Matt Waddel Date: Tue, 13 Jan 2009 17:13:06 +1000 Subject: m68knommu: add ColdFire M532x to the FEC configuration options Signed-off-by: Matt Waddel Signed-off-by: Greg Ungerer --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9fe8cb7d43ac..6bdfd47d679d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1829,7 +1829,7 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x + depends on M523x || M527x || M5272 || M528x || M520x || M532x help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire processors. -- cgit v1.2.3 From b9d57f94bb0ed56a5a2b58552a9ff4453013ff0b Mon Sep 17 00:00:00 2001 From: Matt Waddel Date: Tue, 13 Jan 2009 17:14:20 +1000 Subject: m68knommu: correct the mii calculations for 532x ColdFire FEC Signed-off-by: Matt Waddel Signed-off-by: Greg Ungerer --- drivers/net/fec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 7e33c129d51c..2769083bfe83 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1698,7 +1698,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva /* * Set MII speed to 2.5 MHz */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; + fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2; fecp->fec_mii_speed = fep->phy_speed; fec_restart(dev, 0); -- cgit v1.2.3 From b98f5046397b9f4c5060e5b73e483bfd9e453dd6 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 20 Jan 2009 17:40:56 +0100 Subject: pata-rb532-cf: remove set_irq_type from finish_io The driver has been tested without the call to set_irq_type at this point and occurs to work fine, so it should be safe to remove it. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index c2e6fb9f2ef9..ebfcda26d639 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) ata_sff_sync might be sufficient. */ ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); - - set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } static void rb532_pata_exec_command(struct ata_port *ap, -- cgit v1.2.3 From d7b1956fed33d30c4815e848fd7a143722916868 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 19 Jan 2009 20:55:50 +0100 Subject: DMI: Introduce dmi_first_match to make the interface more flexible Some notebooks from HP have the problem that their BIOSes attempt to spin down hard drives before entering ACPI system states S4 and S5. This leads to a yo-yo effect during system power-off shutdown and the last phase of hibernation when the disk is first spun down by the kernel and then almost immediately turned on and off by the BIOS. This, in turn, may result in shortening the disk's life times. To prevent this from happening we can blacklist the affected systems using DMI information. However, only the on-board controlles should be blacklisted and their PCI slot numbers can be used for this purpose. Unfortunately the existing interface for checking DMI information of the system is not very convenient for this purpose, because to use it, we would have to define special callback functions or create a separate struct dmi_system_id table for each blacklisted system. To overcome this difficulty introduce a new function dmi_first_match() returning a pointer to the first entry in an array of struct dmi_system_id elements that matches the system DMI information. Then, we can use this pointer to access the entry's .driver_data field containing the additional information, such as the PCI slot number, allowing us to do the desired blacklisting. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/firmware/dmi_scan.c | 74 +++++++++++++++++++++++++++++++++------------ include/linux/dmi.h | 1 + 2 files changed, 56 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index d76adfea5df7..8f0f7c449305 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -414,6 +414,29 @@ void __init dmi_scan_machine(void) dmi_initialized = 1; } +/** + * dmi_matches - check if dmi_system_id structure matches system DMI data + * @dmi: pointer to the dmi_system_id structure to check + */ +static bool dmi_matches(const struct dmi_system_id *dmi) +{ + int i; + + WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); + + for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) { + int s = dmi->matches[i].slot; + if (s == DMI_NONE) + continue; + if (dmi_ident[s] + && strstr(dmi_ident[s], dmi->matches[i].substr)) + continue; + /* No match */ + return false; + } + return true; +} + /** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against @@ -429,31 +452,44 @@ void __init dmi_scan_machine(void) */ int dmi_check_system(const struct dmi_system_id *list) { - int i, count = 0; - const struct dmi_system_id *d = list; - - WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); - - while (d->ident) { - for (i = 0; i < ARRAY_SIZE(d->matches); i++) { - int s = d->matches[i].slot; - if (s == DMI_NONE) - continue; - if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr)) - continue; - /* No match */ - goto fail; + int count = 0; + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) { + count++; + if (d->callback && d->callback(d)) + break; } - count++; - if (d->callback && d->callback(d)) - break; -fail: d++; - } return count; } EXPORT_SYMBOL(dmi_check_system); +/** + * dmi_first_match - find dmi_system_id structure matching system DMI data + * @list: array of dmi_system_id structures to match against + * All non-null elements of the list must match + * their slot's (field index's) data (i.e., each + * list string must be a substring of the specified + * DMI slot's string data) to be considered a + * successful match. + * + * Walk the blacklist table until the first match is found. Return the + * pointer to the matching entry or NULL if there's no match. + */ +const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list) +{ + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) + return d; + + return NULL; +} +EXPORT_SYMBOL(dmi_first_match); + /** * dmi_get_system_info - return DMI data value * @field: data index (see enum dmi_field) diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 34161907b2f8..aea23105d3ed 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -38,6 +38,7 @@ struct dmi_device { #ifdef CONFIG_DMI extern int dmi_check_system(const struct dmi_system_id *list); +const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list); extern const char * dmi_get_system_info(int field); extern const struct dmi_device * dmi_find_device(int type, const char *name, const struct dmi_device *from); -- cgit v1.2.3 From 2a6e58d2731dcc05dafa7f976d935e0f0627fcd7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 19 Jan 2009 20:56:43 +0100 Subject: SATA: Blacklisting of systems that spin off disks during ACPI power off Introduce new libata flags ATA_FLAG_NO_POWEROFF_SPINDOWN and ATA_FLAG_NO_HIBERNATE_SPINDOWN that, if set, will prevent disks from being spun off during system power off and hibernation, respectively (to handle the hibernation case we need the new system state SYSTEM_HIBERNATE_ENTER that can be checked against by libata, in analogy with SYSTEM_POWER_OFF). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 20 +++++++++++++++++--- include/linux/libata.h | 2 ++ 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a1a6e6298c33..3c4c5ae277ba 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -46,6 +46,7 @@ #include #include #include +#include #include "libata.h" @@ -1303,6 +1304,17 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { + /* Some odd clown BIOSen issue spindown on power off (ACPI S4 + * or S5) causing some drives to spin up and down again. + */ + if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && + system_state == SYSTEM_POWER_OFF) + goto skip; + + if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && + system_entering_hibernation()) + goto skip; + /* XXX: This is for backward compatibility, will be * removed. Read Documentation/feature-removal-schedule.txt * for more info. @@ -1326,8 +1338,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) scmd->scsi_done = qc->scsidone; qc->scsidone = ata_delayed_done; } - scmd->result = SAM_STAT_GOOD; - return 1; + goto skip; } /* Issue ATA STANDBY IMMEDIATE command */ @@ -1343,10 +1354,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) return 0; -invalid_fld: + invalid_fld: ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; + skip: + scmd->result = SAM_STAT_GOOD; + return 1; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 2c6bd66209ff..bca3ba25f52a 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -187,6 +187,8 @@ enum { ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ + ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */ + ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */ -- cgit v1.2.3 From 1fd684346d41f6be2487c161f60d03a7feb68911 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 19 Jan 2009 20:57:36 +0100 Subject: SATA AHCI: Blacklist system that spins off disks during ACPI power off Some notebooks from HP have the problem that their BIOSes attempt to spin down hard drives before entering ACPI system states S4 and S5. This leads to a yo-yo effect during system power-off shutdown and the last phase of hibernation when the disk is first spun down by the kernel and then almost immediately turned on and off by the BIOS. This, in turn, may result in shortening the disk's life times. To prevent this from happening we can blacklist the affected systems using DMI information. Blacklist HP nx6310 that uses the AHCI driver. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 96039671e3b9..77bba4c083cb 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2548,6 +2548,32 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +static bool ahci_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2647,6 +2673,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + if (ahci_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN; + dev_info(&pdev->dev, + "quirky BIOS, skipping spindown on poweroff\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at -- cgit v1.2.3 From e57db7bde7bff95ae812736ca00c73bd5271455b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 19 Jan 2009 20:58:29 +0100 Subject: SATA Sil: Blacklist system that spins off disks during ACPI power off Some notebooks from HP have the problem that their BIOSes attempt to spin down hard drives before entering ACPI system states S4 and S5. This leads to a yo-yo effect during system power-off shutdown and the last phase of hibernation when the disk is first spun down by the kernel and then almost immediately turned on and off by the BIOS. This, in turn, may result in shortening the disk's life times. To prevent this from happening we can blacklist the affected systems using DMI information. Blacklist HP nx6325 that uses the sata_sil driver. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 564c142b03b0..bfd55b085ae6 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -695,11 +695,38 @@ static void sil_init_controller(struct ata_host *host) } } +static bool sil_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6325", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x12UL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; int board_id = ent->driver_data; - const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL }; + struct ata_port_info pi = sil_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; void __iomem *mmio_base; int n_ports, rc; @@ -713,6 +740,13 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == sil_3114) n_ports = 4; + if (sil_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; -- cgit v1.2.3 From 5f451fe1ab5d73b987051f0d23c85216c552e163 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 19 Jan 2009 20:59:22 +0100 Subject: SATA PIIX: Blacklist system that spins off disks during ACPI power off Some notebooks from HP have the problem that their BIOSes attempt to spin down hard drives before entering ACPI system states S4 and S5. This leads to a yo-yo effect during system power-off shutdown and the last phase of hibernation when the disk is first spun down by the kernel and then almost immediately turned on and off by the BIOS. This, in turn, may result in shortening the disk's life times. To prevent this from happening we can blacklist the affected systems using DMI information. Blacklist HP 2510p that uses the ata_piix driver. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 887d8f46a287..54961c0b2c73 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1387,6 +1387,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host) } } +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1422,6 +1448,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (!in_module_init) return -ENODEV; + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; -- cgit v1.2.3 From 766fb95ba06e1bbf531d30dc05e21b2d4a0e8dd2 Mon Sep 17 00:00:00 2001 From: Sidney Amani Date: Tue, 27 Jan 2009 10:11:46 +0100 Subject: UBI: allow direct user-space I/O Introduce a new ioctl UBI_IOCSETPROP to set properties on a volume. Also add the first property: UBI_PROP_DIRECT_WRITE, this property is used to set the ability to use direct writes in userspace Signed-off-by: Sidney Amani Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/Kconfig.debug | 10 ---------- drivers/mtd/ubi/cdev.c | 36 ++++++++++++++++++++++++++++-------- drivers/mtd/ubi/ubi.h | 5 ++++- include/mtd/ubi-user.h | 34 ++++++++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug index 1e2ee22edeff..2246f154e2f7 100644 --- a/drivers/mtd/ubi/Kconfig.debug +++ b/drivers/mtd/ubi/Kconfig.debug @@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT This option switches the background thread off by default. The thread may be also be enabled/disabled via UBI sysfs. -config MTD_UBI_DEBUG_USERSPACE_IO - bool "Direct user-space write/erase support" - default n - depends on MTD_UBI_DEBUG - help - By default, users cannot directly write and erase individual - eraseblocks of dynamic volumes, and have to use update operation - instead. This option enables this capability - it is very useful for - debugging and testing. - config MTD_UBI_DEBUG_EMULATE_BITFLIPS bool "Emulate flash bit-flips" depends on MTD_UBI_DEBUG diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index f9631eb3fef3..e63c8fc3df3a 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -259,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return err ? err : count_save - count; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO - /* * This function allows to directly write to dynamic UBI volumes, without - * issuing the volume update operation. Available only as a debugging feature. - * Very useful for testing UBI. + * issuing the volume update operation. */ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) @@ -276,6 +273,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count_save = count; char *tbuf; + if (!vol->direct_writes) + return -EPERM; + dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -339,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, return err ? err : count_save - count; } -#else -#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM) -#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */ - static ssize_t vol_cdev_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) { @@ -552,6 +548,30 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd, break; } + /* Set volume property command*/ + case UBI_IOCSETPROP: + { + struct ubi_set_prop_req req; + + err = copy_from_user(&req, argp, + sizeof(struct ubi_set_prop_req)); + if (err) { + err = -EFAULT; + break; + } + switch (req.property) { + case UBI_PROP_DIRECT_WRITE: + mutex_lock(&ubi->volumes_mutex); + desc->vol->direct_writes = !!req.value; + mutex_unlock(&ubi->volumes_mutex); + break; + default: + err = -EINVAL; + break; + } + break; + } + default: err = -ENOTTY; break; diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 381f0e1d0a74..c055511bb1b2 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -206,6 +206,7 @@ struct ubi_volume_desc; * @upd_marker: %1 if the update marker is set for this volume * @updating: %1 if the volume is being updated * @changing_leb: %1 if the atomic LEB change ioctl command is in progress + * @direct_writes: %1 if direct writes are enabled for this volume * * @gluebi_desc: gluebi UBI volume descriptor * @gluebi_refcount: reference count of the gluebi MTD device @@ -253,6 +254,7 @@ struct ubi_volume { unsigned int upd_marker:1; unsigned int updating:1; unsigned int changing_leb:1; + unsigned int direct_writes:1; #ifdef CONFIG_MTD_UBI_GLUEBI /* @@ -304,7 +306,8 @@ struct ubi_wl_entry; * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy * @volumes_mutex: protects on-flash volume table and serializes volume - * changes, like creation, deletion, update, re-size and re-name + * changes, like creation, deletion, update, re-size, + * re-name and set property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 82113e160a2c..296efae3525e 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -124,6 +124,14 @@ * To check if a logical eraseblock is mapped to a physical eraseblock, the * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is * not mapped, and %1 if it is mapped. + * + * Set an UBI volume property + * ~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be + * used. A pointer to a &struct ubi_set_prop_req object is expected to be + * passed. The object describes which property should be set, and to which value + * it should be set. */ /* @@ -175,6 +183,8 @@ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) /* Check if LEB is mapped command */ #define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) +/* Set an UBI volume property */ +#define UBI_IOCSETPROP _IOW(UBI_VOL_IOC_MAGIC, 6, struct ubi_set_prop_req) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 @@ -210,6 +220,16 @@ enum { UBI_STATIC_VOLUME = 4, }; +/* + * UBI set property ioctl constants + * + * @UBI_PROP_DIRECT_WRITE: allow / disallow user to directly write and + * erase individual eraseblocks on dynamic volumes + */ +enum { + UBI_PROP_DIRECT_WRITE = 1, +}; + /** * struct ubi_attach_req - attach MTD device request. * @ubi_num: UBI device number to create @@ -373,4 +393,18 @@ struct ubi_map_req { int8_t padding[3]; } __attribute__ ((packed)); + +/** + * struct ubi_set_prop_req - a data structure used to set an ubi volume + * property. + * @property: property to set (%UBI_PROP_DIRECT_WRITE) + * @padding: reserved for future, not used, has to be zeroed + * @value: value to set + */ +struct ubi_set_prop_req { + uint8_t property; + uint8_t padding[7]; + uint64_t value; +} __attribute__ ((packed)); + #endif /* __UBI_USER_H__ */ -- cgit v1.2.3 From 808ffa3d302257b9dc37b1412c1fcdf976fcddac Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 27 Jan 2009 11:50:37 +0000 Subject: tty_open can return to userspace holding tty_mutex __tty_open could return (to userspace) holding the tty_mutex thanks to a regression introduced by 4a2b5fddd53b80efcb3266ee36e23b8de28e761a ("Move tty lookup/reopen to caller"). This was found by bisecting an fsfuzzer problem. Admittedly I have no idea how it managed to tickle this 100% reliably, but it is clearly a regression and when hit leaves the box in a completely unusable state. This patch lets the fsfuzzer test complete every time. Signed-off-by: Eric Paris Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index d33e5ab06177..bc84e125c6bc 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1817,8 +1817,10 @@ got_driver: /* check whether we're reopening an existing tty */ tty = tty_driver_lookup_tty(driver, inode, index); - if (IS_ERR(tty)) + if (IS_ERR(tty)) { + mutex_unlock(&tty_mutex); return PTR_ERR(tty); + } } if (tty) { -- cgit v1.2.3 From 11455be2a3874d405508d9d81157d0f8fb179f32 Mon Sep 17 00:00:00 2001 From: Ihar Hrachyshka Date: Tue, 27 Jan 2009 11:50:46 +0000 Subject: MIPS: enable serial UART support on PNX833X devices. Enabled serial UART driver for PNX833X devices. Signed-off-by: Ihar Hrachyshka Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3e525e38a5d9..7d7f576da202 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && SOC_PNX8550 + depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) select SERIAL_CORE help If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 -- cgit v1.2.3 From e9fed5673949df33385091037f996f1b1a0e1908 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 27 Jan 2009 11:51:06 +0000 Subject: Move jsm_remove_one to .devexit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function jsm_remove_one is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/jsm/jsm_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 338cf8a08b43..92187e28608a 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -180,7 +180,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } -static void jsm_remove_one(struct pci_dev *pdev) +static void __devexit jsm_remove_one(struct pci_dev *pdev) { struct jsm_board *brd = pci_get_drvdata(pdev); int i = 0; -- cgit v1.2.3 From 78d70d48132ce4c678a95b771ffa1af4fb5a03ec Mon Sep 17 00:00:00 2001 From: Michael Bramer Date: Tue, 27 Jan 2009 11:51:16 +0000 Subject: Add support for '8-port RS-232 MIC-3620 from advantech' This Patch add the device information for the MIC-3620 8-port RS-232 cPCI card from Advantech Co. Ltd. Signed-off-by: Michael Bramer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 2a3671233b15..536d8e510f66 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -806,6 +806,8 @@ pci_default_setup(struct serial_private *priv, #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -2152,6 +2154,10 @@ static int pciserial_resume_one(struct pci_dev *dev) #endif static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, -- cgit v1.2.3 From 418e4da33f45fd7bdcce48778b149b780ff730bc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 26 Jan 2009 21:43:08 +0100 Subject: PCI PM: Fix suspend error paths and testing facility breakage If one of device drivers refuses to suspend by returning error code from its ->suspend() callback, the devices that have already been suspended are resumed by executing their drivers' ->resume() callbacks. Some of these callbacks expect the device's configuration space to be restored if the device has been put into D3 before they are called. Unfortunately, this mechanism has been broken by recent changes moving the restoration of config spaces of some devices (most importantly, USB controllers and HDA Intel) into the resume callbacks executed with interrupts off. Obviously, these callbacks are not invoked in the suspend error path and, as a result, the system cannot be successfully brought back into the working state in case of a suspend error. The same thing happens in the hibernation error path right before putting the system into S4. Similarly, the suspend testing facility associated with the /sys/power/pm_test file is broken, because it uses the very same mechanism that is used in the suspend and hibernation error paths. Fix the breakage by making the PCI core restore the configuration spaces of PCI devices that haven't been restored already before pci_pm_resume() is called for those devices by the PM core. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 9de07b75b993..4884c4840b3d 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -370,6 +370,7 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) } pci_save_state(pci_dev); + pci_dev->state_saved = true; /* * This is for compatibility with existing code with legacy PM support. */ @@ -419,6 +420,7 @@ static int pci_legacy_resume(struct device *dev) static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { pci_restore_standard_config(pci_dev); + pci_dev->state_saved = false; pci_fixup_device(pci_fixup_resume_early, pci_dev); } @@ -555,6 +557,13 @@ static int pci_pm_resume(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * This is necessary for the suspend error path in which resume is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); @@ -710,6 +719,13 @@ static int pci_pm_restore(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * This is necessary for the hibernation error path in which restore is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); -- cgit v1.2.3 From 545ffd58adc86b8d33449dab44fe81b503a6f81b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 22 Jan 2009 23:36:56 +0100 Subject: PCI PM: Fix hibernation breakage on EeePC 701 Hibernation breaks on EeePC 701 as a result of attempting to put one of its (driverless) devices into a low power state. Avoid that by not attepmting to power manage driverless devices during hibernation. Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Alan Jenkins Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 4884c4840b3d..ab1d615425a8 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -669,7 +669,10 @@ static int pci_pm_poweroff(struct device *dev) if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_HIBERNATE); - if (drv && drv->pm && drv->pm->poweroff) { + if (!drv || !drv->pm) + return 0; + + if (drv->pm->poweroff) { error = drv->pm->poweroff(dev); suspend_report_result(drv->pm->poweroff, error); } -- cgit v1.2.3 From 48f67f54a53bb68619a63c3f38cf7f502ed74b1d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 22 Jan 2009 23:38:31 +0100 Subject: PCI PM: Power up devices before restoring their state Devices that have MSI-X enabled before suspend to RAM or hibernation and that are in a low power state during resume will not be handled correctly by pci_restore_standard_config(). Namely, it first calls pci_restore_state() which calls pci_restore_msi_state(), which in turn executes __pci_restore_msix_state() that accesses the device's memory space to restore the contents of the MSI-X table. However, if the device is in a low power state at this point, it's memory space is not accessible. The easiest way to fix this potential problem is to make pci_restore_standard_config() call pci_restore_state() after it has put the device into the full power state, D0. Fortunately, all of this is done with interrupts off, so the change of ordering should not cause any trouble. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 17bd9325a245..f0aa3d533839 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1393,12 +1393,11 @@ int pci_restore_standard_config(struct pci_dev *dev) pci_power_t prev_state; int error; - pci_restore_state(dev); pci_update_current_state(dev, PCI_D0); prev_state = dev->current_state; if (prev_state == PCI_D0) - return 0; + goto Restore; error = pci_raw_set_power_state(dev, PCI_D0, false); if (error) @@ -1421,7 +1420,8 @@ int pci_restore_standard_config(struct pci_dev *dev) dev->current_state = PCI_D0; - return 0; + Restore: + return pci_restore_state(dev); } /** -- cgit v1.2.3 From 476e7faefc43f106a90b5c96166c59b75de19d30 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 22 Jan 2009 23:39:57 +0100 Subject: PCI PM: Do not wait for buses in B2 or B3 during resume pci_restore_standard_config() adds extra delay for PCI buses in low power states (B2 or B3), but this is only correct for buses in B2, because the buses in B3 are reset when they are put back into B0. Thus we should wait for such buses to settle after the reset, but it's not a good idea to wait that long (1.1 s) with interrupts off. On the other hand, we have never waited for buses in B2 and B3 during resume and it seems reasonable to go back to this well tested behaviour. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f0aa3d533839..48807556b47a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1403,19 +1403,19 @@ int pci_restore_standard_config(struct pci_dev *dev) if (error) return error; - if (pci_is_bridge(dev)) { - if (prev_state > PCI_D1) - mdelay(PCI_PM_BUS_WAIT); - } else { - switch(prev_state) { - case PCI_D3cold: - case PCI_D3hot: - mdelay(pci_pm_d3_delay); - break; - case PCI_D2: - udelay(PCI_PM_D2_DELAY); - break; - } + /* + * This assumes that we won't get a bus in B2 or B3 from the BIOS, but + * we've made this assumption forever and it appears to be universally + * satisfied. + */ + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; } dev->current_state = PCI_D0; -- cgit v1.2.3 From bffac3c593eba1f9da3efd0199e49ea6558a40ce Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 21 Jan 2009 19:19:19 -0500 Subject: PCI MSI: Fix undefined shift by 32 Add an msi_mask() function which returns the correct bitmask for the number of MSI interrupts you have. This fixes an undefined bug in msi_capability_init(). Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 896a15d70f5b..44f15ff70c1d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } +/* + * Essentially, this is ((1 << (1 << x)) - 1), but without the + * undefinedness of a << 32. + */ +static inline __attribute_const__ u32 msi_mask(unsigned x) +{ + static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; + return mask[x]; +} + static void msix_flush_writes(struct irq_desc *desc) { struct msi_desc *entry; @@ -407,8 +417,7 @@ static int msi_capability_init(struct pci_dev *dev) /* All MSIs are unmasked by default, Mask them all */ pci_read_config_dword(dev, base, &maskbits); - temp = (1 << multi_msi_capable(control)); - temp = ((temp - 1) & ~temp); + temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1); maskbits |= temp; pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; -- cgit v1.2.3 From bf4162bcf82ebc3258d6bc0ddd6453132abde72d Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Tue, 25 Nov 2008 13:51:44 -0800 Subject: PCI hotplug: fakephp: Allocate PCI resources before adding the device For PCI devices, pci_bus_assign_resources() must be called to set up the pci_device->resource array before pci_bus_add_devices() can be called, else attempts to load drivers results in BAR collision errors where there are none. This is not done in fakephp, so devices can be "unplugged" but scanning the parent bus won't bring the devices back due to resource unallocation. Move the pci_bus_add_device-calling logic into pci_rescan_bus and preface it with a call to pci_bus_assign_resources so that we only have to (re)allocate resources once per bus where a new device is found. Signed-off-by: Darrick J. Wong Acked-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/fakephp.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index b0e7de9e536d..d8649e127298 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work) * Tries hard not to re-enable already existing devices; * also handles scanning of subfunctions. */ -static void pci_rescan_slot(struct pci_dev *temp) +static int pci_rescan_slot(struct pci_dev *temp) { struct pci_bus *bus = temp->bus; struct pci_dev *dev; int func; - int retval; u8 hdr_type; + int count = 0; if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) { temp->hdr_type = hdr_type & 0x7f; @@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } /* multifunction device? */ if (!(hdr_type & 0x80)) - return; + return count; /* continue scanning for other functions */ for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) { @@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } } } + + return count; } @@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus) { unsigned int devfn; struct pci_dev *dev; + int retval; + int found = 0; dev = alloc_pci_dev(); if (!dev) return; @@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus) dev->sysdata = bus->sysdata; for (devfn = 0; devfn < 0x100; devfn += 8) { dev->devfn = devfn; - pci_rescan_slot(dev); + found += pci_rescan_slot(dev); + } + + if (found) { + pci_bus_assign_resources(bus); + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip already-added devices */ + if (dev->is_added) + continue; + retval = pci_bus_add_device(dev); + if (retval) + dev_err(&dev->dev, + "Error adding device, continuing\n"); + else + add_slot(dev); + } + pci_bus_add_devices(bus); } kfree(dev); } -- cgit v1.2.3 From 71a082efc9fdc12068a3cee6cebb1330b00ebeee Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 27 Jan 2009 01:03:35 +0000 Subject: PCI hotplug: Change link order of pciehp & acpiphp Some hardware exposes PCIE slots in such a way that they can be claimed by either the acpiphp or pciehp driver. pciehp is the preferred driver if the firmware allows the OS to claim control via the _OSC method so should be loaded first - if it fails to bind (either due to a missing _OSC method or the firmware refusing to hand off control) then we can fall back to acpiphp or a vendor-specific driver. This patch simply changes the link order to ensure that pciehp will be initialised before acpiphp if both are statically built into the kernel. Signed-off-by: Matthew Garrett Acked-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index e31fb91652ce..2aa117c8cd87 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -5,11 +5,15 @@ obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o + +# pciehp should be linked before acpiphp in order to allow the native driver +# to attempt to bind first. We can then fall back to generic support. + +obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC) += cpcihp_generic.o -obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o -- cgit v1.2.3 From 95bec45d2051227ef037f1080d7cef003b88d852 Mon Sep 17 00:00:00 2001 From: Wolfgang Glas Date: Thu, 15 Jan 2009 23:11:53 +0100 Subject: USB: cp2101: add fasttrax GPS evaluation kit vendor/product ID This adds the vendor/product ID of the fasttrax GPS evaluation kit from: http://www.fastraxgps.com/products/evaluationtools/evaluationkit/ to the cp2101 module since this device is actually equipped with a CP210x USB to serial bridge. The vendor/product ID is: 0x10c4/0x826b. Signed-off-by: Wolfgang Glas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index cfaf1f085535..e97eb054e38e 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ -- cgit v1.2.3 From ddeac4e75f2527a340f9dc655bde49bb2429b39b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 15 Jan 2009 17:03:33 -0500 Subject: USB: fix toggle mismatch in disable_endpoint paths This patch (as1200) finishes some fixes that were left incomplete by an earlier patch. Although nobody has addressed this issue in the past, it turns out that we need to distinguish between two different modes of disabling and enabling endpoints. In one mode only the data structures in usbcore are affected, and in the other mode the host controller and device hardware states are affected as well. The earlier patch added an extra argument to the routines in the enable_endpoint pathways to reflect this difference. This patch adds corresponding arguments to the disable_endpoint pathways. Without this change, the endpoint toggle state can get out of sync between the host and the device. The exact mechanism depends on the details of the host controller (whether or not it stores its own copy of the toggle values). Signed-off-by: Alan Stern Reported-by: Dan Streetman Tested-by: Dan Streetman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 2 +- drivers/usb/core/hub.c | 4 ++-- drivers/usb/core/message.c | 40 ++++++++++++++++++++++++---------------- drivers/usb/core/usb.h | 5 +++-- 4 files changed, 30 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 98760553bc95..d0a21a5f8201 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev) * supports "soft" unbinding. */ if (!driver->soft_unbind) - usb_disable_interface(udev, intf); + usb_disable_interface(udev, intf, false); driver->disconnect(intf); usb_cancel_queued_reset(intf); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 94d5ee263c20..cd50d86029e7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) void usb_ep0_reinit(struct usb_device *udev) { - usb_disable_endpoint(udev, 0 + USB_DIR_IN); - usb_disable_endpoint(udev, 0 + USB_DIR_OUT); + usb_disable_endpoint(udev, 0 + USB_DIR_IN, true); + usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true); usb_enable_endpoint(udev, &udev->ep0, true); } EXPORT_SYMBOL_GPL(usb_ep0_reinit); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index de51667dd64d..31fb204f44c6 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf) * @dev: the device whose endpoint is being disabled * @epaddr: the endpoint's address. Endpoint number for output, * endpoint number + USB_DIR_IN for input + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * - * Deallocates hcd/hardware state for this endpoint ... and nukes all - * pending urbs. - * - * If the HCD hasn't registered a disable() function, this sets the - * endpoint's maxpacket size to 0 to prevent further submissions. + * Disables the endpoint for URB submission and nukes all pending URBs. + * If @reset_hardware is set then also deallocates hcd/hardware state + * for the endpoint. */ -void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) +void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware) { unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; struct usb_host_endpoint *ep; @@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) if (usb_endpoint_out(epaddr)) { ep = dev->ep_out[epnum]; - dev->ep_out[epnum] = NULL; + if (reset_hardware) + dev->ep_out[epnum] = NULL; } else { ep = dev->ep_in[epnum]; - dev->ep_in[epnum] = NULL; + if (reset_hardware) + dev->ep_in[epnum] = NULL; } if (ep) { ep->enabled = 0; usb_hcd_flush_endpoint(dev, ep); - usb_hcd_disable_endpoint(dev, ep); + if (reset_hardware) + usb_hcd_disable_endpoint(dev, ep); } } @@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * * Disables all the endpoints for the interface's current altsetting. */ -void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) +void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, + bool reset_hardware) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) { usb_disable_endpoint(dev, - alt->endpoint[i].desc.bEndpointAddress); + alt->endpoint[i].desc.bEndpointAddress, + reset_hardware); } } @@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } dev->toggle[0] = dev->toggle[1] = 0; @@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) remove_intf_ep_devs(iface); usb_remove_sysfs_intf_files(iface); } - usb_disable_interface(dev, iface); + usb_disable_interface(dev, iface, true); iface->cur_altsetting = alt; @@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev) */ for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } config = dev->actconfig; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 386177867a8a..9d0f33fe8719 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, bool reset_toggle); extern void usb_enable_interface(struct usb_device *dev, struct usb_interface *intf, bool reset_toggles); -extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr); +extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware); extern void usb_disable_interface(struct usb_device *dev, - struct usb_interface *intf); + struct usb_interface *intf, bool reset_hardware); extern void usb_release_interface_cache(struct kref *ref); extern void usb_disable_device(struct usb_device *dev, int skip_ep0); extern int usb_deauthorize_device(struct usb_device *); -- cgit v1.2.3 From b90de8aea36ae6fe8050a6e91b031369c4f251b2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 14 Jan 2009 16:17:19 +0100 Subject: USB: storage: add unusual devs entry This adds an unusual devs entry for 2116:0320 Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a7f9513fa19d..ec40c26bd544 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2041,6 +2041,12 @@ UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE), +UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, + "ST", + "2A", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* patch submitted by Davide Perini * and Renato Perini */ -- cgit v1.2.3 From bcca06efea883bdf3803a0bb0ffa60f26730387d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Jan 2009 11:35:54 -0500 Subject: USB: don't enable wakeup by default for PCI host controllers This patch (as1199) changes the initial wakeup settings for PCI USB host controllers. The controllers are marked as capable of waking the system, but wakeup is not enabled by default. It turns out that enabling wakeup for USB host controllers has a lot of bad consequences. As the simplest example, if a USB mouse or keyboard is unplugged immediately after the computer is put to sleep, the unplug will cause the system to wake back up again! We are better off marking them as wakeup-capable and leaving wakeup disabled. Signed-off-by: Alan Stern Reported-by: Rafael J. Wysocki CC: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 1 - drivers/usb/host/ehci-pci.c | 2 +- drivers/usb/host/ohci-hcd.c | 8 +++----- 3 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 507741ed4482..99432785f438 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); - device_set_wakeup_enable(&dev->dev, 1); retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bdc6e86e1f8b..9faa5c8fe025 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_read_config_word(pdev, 0x62, &port_wake); if (port_wake & 0x0001) { dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); - device_init_wakeup(&pdev->dev, 1); + device_set_wakeup_capable(&pdev->dev, 1); } } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 65a9609f4ad6..5cf5f1eca4f4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci) * to be checked in case boot firmware (BIOS/SMM/...) has set up * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). * If the bus glue detected wakeup capability then it should - * already be enabled. Either way, if wakeup should be enabled - * but isn't, we'll enable it now. + * already be enabled; if so we'll just enable it again. */ - if ((ohci->hc_control & OHCI_CTRL_RWC) != 0 - && !device_can_wakeup(hcd->self.controller)) - device_init_wakeup(hcd->self.controller, 1); + if ((ohci->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: -- cgit v1.2.3 From a15d95a003fae154121733f049dd25e9c13dbef3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 20 Jan 2009 01:26:56 +0100 Subject: USB: Fix suspend-resume of PCI USB controllers Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 (USB: fix up suspend and resume for PCI host controllers) attempted to fix the suspend-resume of PCI USB controllers, but unfortunately it did that incorrectly and interrupts are left enabled by the USB controllers' ->suspend_late() callback as a result. This leads to serious problems during suspend which are very difficult to debug. Fix the issue by removing the ->suspend_late() callback of PCI USB controllers and moving the code from there to the ->suspend() callback executed with interrupts enabled. Additionally, make the ->resume() callback of PCI USB controllers execute pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the full power state (PCI_D0). Signed-off-by: Rafael J. Wysocki Tested-by: Andrey Borzenkov Tested-by: "Jeff Chua" Cc: Alan Stern Cc: Andrew Morton Cc: Christian Borntraeger Cc: "Zdenek Kabelac" Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 116 +++++++++++--------------------------------- drivers/usb/core/hcd.h | 1 - drivers/usb/host/ehci-pci.c | 1 - drivers/usb/host/ohci-pci.c | 1 - drivers/usb/host/uhci-hcd.c | 1 - 5 files changed, 27 insertions(+), 93 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 99432785f438..c54fc40458b1 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -200,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) struct usb_hcd *hcd = pci_get_drvdata(dev); int retval = 0; int wake, w; + int has_pci_pm; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -229,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) synchronize_irq(dev->irq); + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. + */ + pci_disable_device(dev); + + pci_save_state(dev); + /* Don't fail on error to enable wakeup. We rely on pci code * to reject requests the hardware can't implement, rather * than coding the same thing. @@ -240,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) wake = w; dev_dbg(&dev->dev, "wakeup: %d\n", wake); - /* Downstream ports from this root hub should already be quiesced, so - * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. - */ - pci_disable_device(dev); - done: - return retval; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); - -/** - * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend_late. - */ -int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) -{ - int retval = 0; - int has_pci_pm; - - /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; - - pci_save_state(dev); - /* Don't change state if we don't need to */ if (message.event == PM_EVENT_FREEZE || message.event == PM_EVENT_PRETHAW) { @@ -314,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); +EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled @@ -324,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); */ int usb_hcd_pci_resume_early(struct pci_dev *dev) { - int retval = 0; - pci_power_t state = dev->current_state; - -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif - - /* NOTE: chip docs cover clean "real suspend" cases (what Linux - * calls "standby", "suspend to RAM", and so on). There are also - * dirty cases when swsusp fakes a suspend in "shutdown" mode. - */ - if (state != PCI_D0) { -#ifdef DEBUG - int pci_pm; - u16 pmcr; - - pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr); - pmcr &= PCI_PM_CTRL_STATE_MASK; - if (pmcr) { - /* Clean case: power to USB and to HC registers was - * maintained; remote wakeup is easy. - */ - dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr); - } else { - /* Clean: HC lost Vcc power, D0 uninitialized - * + Vaux may have preserved port and transceiver - * state ... for remote wakeup from D3cold - * + or not; HCD must reinit + re-enumerate - * - * Dirty: D0 semi-initialized cases with swsusp - * + after BIOS init - * + after Linux init (HCD statically linked) - */ - dev_dbg(&dev->dev, "resume from previous PCI D%d\n", - state); - } -#endif - - retval = pci_set_power_state(dev, PCI_D0); - } else { - /* Same basic cases: clean (powered/not), dirty */ - dev_dbg(&dev->dev, "PCI legacy resume\n"); - } - - if (retval < 0) - dev_err(&dev->dev, "can't resume: %d\n", retval); - else - pci_restore_state(dev); - - return retval; + pci_restore_state(dev); + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); @@ -397,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev) struct usb_hcd *hcd; int retval; +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, @@ -404,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) return 0; } + pci_enable_wake(dev, PCI_D0, false); + retval = pci_enable_device(dev); if (retval < 0) { dev_err(&dev->dev, "can't re-enable after resume, %d!\n", diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 572d2cf46e8d..5b94a56bec23 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg); extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 9faa5c8fe025..bb21fb0a4969 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 8b28ae7865ba..5d625c3fd423 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4e221060f58c..944f7e0ca4df 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ -- cgit v1.2.3 From 501950d846218ed80a776d2aae5aed9c8b92e778 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Jan 2009 11:33:42 -0500 Subject: USB: fix char-device disconnect handling This patch (as1198) fixes a conceptual bug: Somewhere along the line we managed to confuse USB class devices with USB char devices. As a result, the code to send a disconnect signal to userspace would not be built if both CONFIG_USB_DEVICE_CLASS and CONFIG_USB_DEVICEFS were disabled. The usb_fs_classdev_common_remove() routine has been renamed to usbdev_remove() and it is now called whenever any USB device is removed, not just when a class device is unregistered. The notifier registration and unregistration calls are no longer conditionally compiled. And since the common removal code will always be called as part of the char device interface, there's no need to call it again as part of the usbfs interface; thus the invocation of usb_fs_classdev_common_remove() has been taken out of usbfs_remove_device(). Signed-off-by: Alan Stern Reported-by: Alon Bar-Lev Tested-by: Alon Bar-Lev Cc: stable --- drivers/usb/core/devio.c | 20 ++++++++++++-------- drivers/usb/core/inode.c | 1 - drivers/usb/core/usb.h | 1 - 3 files changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 26fece124e0e..7513bb083c15 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = { .release = usbdev_release, }; -void usb_fs_classdev_common_remove(struct usb_device *udev) +static void usbdev_remove(struct usb_device *udev) { struct dev_state *ps; struct siginfo sinfo; @@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev) { if (dev->usb_classdev) device_unregister(dev->usb_classdev); - usb_fs_classdev_common_remove(dev); } -static int usb_classdev_notify(struct notifier_block *self, +#else +#define usb_classdev_add(dev) 0 +#define usb_classdev_remove(dev) do {} while (0) + +#endif + +static int usbdev_notify(struct notifier_block *self, unsigned long action, void *dev) { switch (action) { @@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self, break; case USB_DEVICE_REMOVE: usb_classdev_remove(dev); + usbdev_remove(dev); break; } return NOTIFY_OK; } static struct notifier_block usbdev_nb = { - .notifier_call = usb_classdev_notify, + .notifier_call = usbdev_notify, }; -#endif static struct cdev usb_device_cdev; @@ -1798,9 +1803,8 @@ int __init usb_devio_init(void) * to /sys/dev */ usb_classdev_class->dev_kobj = NULL; - - usb_register_notify(&usbdev_nb); #endif + usb_register_notify(&usbdev_nb); out: return retval; @@ -1811,8 +1815,8 @@ error_cdev: void usb_devio_cleanup(void) { -#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify(&usbdev_nb); +#ifdef CONFIG_USB_DEVICE_CLASS class_destroy(usb_classdev_class); #endif cdev_del(&usb_device_cdev); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 2a129cb7bb56..dff5760a37f6 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev) fs_remove_file (dev->usbfs_dentry); dev->usbfs_dentry = NULL; } - usb_fs_classdev_common_remove(dev); } static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 9d0f33fe8719..79d8a9ea559b 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -152,7 +152,6 @@ extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; extern void usbfs_conn_disc_event(void); -extern void usb_fs_classdev_common_remove(struct usb_device *udev); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); -- cgit v1.2.3 From 2bf5fa13fc8e34d7b86307b99f64a24cb7a83852 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 24 Jan 2009 17:55:57 -0800 Subject: USB: omap1 ohci buildfix (otg related) > > drivers/built-in.o: In function `ohci_omap_init': > > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver' > > drivers/built-in.o: In function `omap_udc_probe': > > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver' > > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver' Reported-by: Russell King Signed-off-by: David Brownell Acked-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 1 + drivers/usb/otg/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2b476b6b3d4d..5a988f4cdf87 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -140,6 +140,7 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select USB_OTG_UTILS if ARCH_OMAP ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 8e8dbdb9b39b..ee55b449ffde 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -6,14 +6,14 @@ comment "OTG and related infrastructure" -if USB || USB_GADGET - config USB_OTG_UTILS bool help Select this to make sure the build includes objects from the OTG infrastructure directory. +if USB || USB_GADGET + # # USB Transceiver Drivers # -- cgit v1.2.3 From 10b4eadef140b09baf8b9ec1df37185e69773275 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 24 Jan 2009 17:56:17 -0800 Subject: USB: musb davinci buildfix Trying once more to get this merged. The original was submitted for 2.6.27-rc2 or so, and never got correctly merged. Neither were any of the numerous subsequent resends. Sigh. CC drivers/usb/musb/davinci.o drivers/usb/musb/davinci.c:35:32: error: mach/arch/hardware.h: No such file or directory drivers/usb/musb/davinci.c:36:30: error: mach/arch/memory.h: No such file or directory drivers/usb/musb/davinci.c:37:28: error: mach/arch/gpio.h: No such file or directory drivers/usb/musb/davinci.c:373: error: redefinition of 'musb_platform_set_mode' drivers/usb/musb/davinci.c:368: error: previous definition of 'musb_platform_set_mode' was here Signed-off-by: David Brownell Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 0d566dc5ce06..5a8fd5d57a11 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,9 +32,10 @@ #include #include -#include -#include -#include +#include +#include +#include + #include #include "musb_core.h" @@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode) return -EIO; } -int musb_platform_set_mode(struct musb *musb, u8 mode) -{ - /* EVM can't do this (right?) */ - return -EIO; -} - int __init musb_platform_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; -- cgit v1.2.3 From 37daa925cf0d4dfd2d1d9ca01e2e0d74fba3d64a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 24 Jan 2009 17:56:25 -0800 Subject: USB: musb_hdrc: another davinci buildfix (otg related) The DaVinci code had an implementation of the OTG transceiver glue too; make it use the new-standard one. Signed-off-by: David Brownell Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-davinci/usb.c | 23 ----------------------- drivers/usb/musb/Kconfig | 1 + 2 files changed, 1 insertion(+), 23 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index c6fb32c36c52..867ead2559ad 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -77,29 +77,6 @@ static struct platform_device usb_dev = { .num_resources = ARRAY_SIZE(usb_resources), }; -#ifdef CONFIG_USB_MUSB_OTG - -static struct otg_transceiver *xceiv; - -struct otg_transceiver *otg_get_transceiver(void) -{ - if (xceiv) - get_device(xceiv->dev); - return xceiv; -} -EXPORT_SYMBOL(otg_get_transceiver); - -int otg_set_transceiver(struct otg_transceiver *x) -{ - if (xceiv && x) - return -EBUSY; - xceiv = x; - return 0; -} -EXPORT_SYMBOL(otg_set_transceiver); - -#endif - void __init setup_usb(unsigned mA, unsigned potpgt_msec) { usb_data.power = mA / 2; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5af7379cd9a3..e1d81d8de225 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP + select USB_OTG_UTILS tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB -- cgit v1.2.3 From 97a39896816489fe9a67c223e782e8dda06f25c9 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Sat, 24 Jan 2009 17:56:39 -0800 Subject: USB: musb free_irq bugfix Fixes insert module failure as free_irq() was not done in previous rmmod. Signed-off-by: Ajay Kumar Gupta Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6c7faacfb535..2cc34fa05b73 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb) musb_gadget_cleanup(musb); #endif - if (musb->nIrq >= 0 && musb->irq_wake) { - disable_irq_wake(musb->nIrq); + if (musb->nIrq >= 0) { + if (musb->irq_wake) + disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } if (is_dma_capable() && musb->dma_controller) { -- cgit v1.2.3 From af7e0c5f126677fe8e6c4fbea37637b9c0c2fe2a Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sat, 24 Jan 2009 17:57:15 -0800 Subject: USB: musb: tusb6010 buildfix drivers/usb/musb/tusb6010_omap.c:18:26: error: asm/arch/dma.h: No such file or directory drivers/usb/musb/tusb6010_omap.c:19:26: error: asm/arch/mux.h: No such file or directory Signed-off-by: Kalle Valo Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010_omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 52f7f29cebda..7e073a0d7ac9 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -15,8 +15,8 @@ #include #include #include -#include -#include +#include +#include #include "musb_core.h" -- cgit v1.2.3 From 96bcd090fa434b4369e6e3a9cba937d1e513596d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 24 Jan 2009 17:57:24 -0800 Subject: USB: musb uses endpoint functions This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include @depends on !inc && (r1||r5)@ @@ + #include #include // Signed-off-by: Julia Lawall Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 6 +++--- drivers/usb/musb/musb_host.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6197daeab8f9..4ea305387981 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep, status = -EBUSY; goto fail; } - musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + musb_ep->type = usb_endpoint_type(desc); /* check direction and (later) maxpacket size against endpoint */ - if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum) + if (usb_endpoint_num(desc) != epnum) goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ @@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep, * packet size (or fail), set the mode, clear the fifo */ musb_ep_select(mbase, epnum); - if (desc->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(desc)) { u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); if (hw_ep->is_shared_fifo) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 99fa61234876..a035ceccf950 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1847,8 +1847,8 @@ static int musb_urb_enqueue( goto done; } - qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + qh->epnum = usb_endpoint_num(epd); + qh->type = usb_endpoint_type(epd); /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ qh->addr_reg = (u8) usb_pipedevice(urb->pipe); -- cgit v1.2.3 From 704a14854aaf9758a1248ea36a7d1b8cc42a4b3e Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Sat, 24 Jan 2009 17:57:30 -0800 Subject: USB: musb cppi bugfixes These compilation errors are related to incorrect debugging macro and variable names and generated the following errors: drivers/usb/musb/cppi_dma.c:437:5: warning: "MUSB_DEBUG" is not defined drivers/usb/musb/cppi_dma.c: In function 'cppi_next_rx_segment': drivers/usb/musb/cppi_dma.c:884: error: 'debug' undeclared (first use in this function) Signed-off-by: Hugo Villeneuve Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 5ad6d0893cbe..d8d5345519c9 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -9,6 +9,7 @@ #include #include "musb_core.h" +#include "musb_debug.h" #include "cppi_dma.h" @@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx, } } +#ifdef CONFIG_USB_MUSB_DEBUG static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) { pr_debug("RXBD/%s %08x: " @@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options); } +#endif static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx) { -#if MUSB_DEBUG > 0 +#ifdef CONFIG_USB_MUSB_DEBUG struct cppi_descriptor *bd; if (!_dbg_level(level)) @@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) bd->hw_options |= CPPI_SOP_SET; tail->hw_options |= CPPI_EOP_SET; - if (debug >= 5) { +#ifdef CONFIG_USB_MUSB_DEBUG + if (_dbg_level(5)) { struct cppi_descriptor *d; for (d = rx->head; d; d = d->next) cppi_dump_rxbd("S", d); } +#endif /* in case the preceding transfer left some state... */ tail = rx->last_processed; -- cgit v1.2.3 From 191b776616838f035c2fe7eecc882b5c1f134353 Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Sat, 24 Jan 2009 17:57:37 -0800 Subject: USB: musb cppi dma fix Initializes the actual_len field to 0 before every DMA transaction. Signed-off-by: Swaminathan S Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index d8d5345519c9..569ef0fed0f6 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -995,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch, cppi_ch->offset = 0; cppi_ch->maxpacket = maxpacket; cppi_ch->buf_len = len; + cppi_ch->channel.actual_len = 0; /* TX channel? or RX? */ if (cppi_ch->transmit) -- cgit v1.2.3 From cd67435ef985d0d6279803f2ae48b5248a7178df Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 26 Jan 2009 02:05:43 -0800 Subject: USB: musb: Kconfig fix The Blackfin MUSB Kconfig text didn't properly parenthesise its dependencies. This was visible in non-Blackfin configs by the way the user interfaces lost track of dependencies, when doing a bunch of test builds. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index e1d81d8de225..9985db08e7db 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -50,7 +50,7 @@ comment "OMAP 343x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP34XX comment "Blackfin high speed USB Support" - depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523) + depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) config USB_TUSB6010 boolean "TUSB 6010 support" -- cgit v1.2.3 From dd4dff8b035f6dda69ece98e20d4c2d76b9f97d1 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 8 Jan 2009 00:21:18 +0800 Subject: USB: composite: Fix bug: should test set_alt function pointer before use it Signed-off-by: Bryan Wu Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f2da0269e1b1..363951eb333c 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -772,7 +772,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[w_index]; if (!f) break; - if (w_value && !f->get_alt) + if (w_value && !f->set_alt) break; value = f->set_alt(f, w_index, w_value); break; -- cgit v1.2.3 From 08889517b3713926169d79d99782192e86acdc67 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 8 Jan 2009 00:21:19 +0800 Subject: USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index In some usb gadget driver, for example usb audio class device, the high byte of w_index is the entity id and low byte is the interface number. If we use the 2 bytes of w_index as the array number, we will get a wrong pointer or NULL pointer. This patch fixes this issue. Signed-off-by: Bryan Wu Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 363951eb333c..5d11c291f1ad 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u8 intf = w_index & 0xFF; u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); struct usb_function *f = NULL; @@ -769,7 +770,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; if (w_value && !f->set_alt) @@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; /* lots of interfaces only need altsetting zero... */ @@ -808,7 +809,7 @@ unknown: */ if ((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (f && f->setup) value = f->setup(f, ctrl); else -- cgit v1.2.3 From 837d84249611e9462dea6181a7ea30aa64e67d6a Mon Sep 17 00:00:00 2001 From: "James A. Treacy" Date: Sat, 24 Jan 2009 23:37:43 -0500 Subject: USB: cdc-acm: support some gps data loggers Below is a patch which allows a number of GPS loggers to work under linux. It is known to support the i-Blue 747 (all models), i-Blue 757, Qstarz BT-Q1000, i.Trek Z1, Konet BGL-32, and the Holux M-241. From: James A. Treacy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00b47ea24f86..5664b4afe566 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,6 +1349,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.2.3 From 0f9c7b4a1cc24d6f05a848f0acf72dbff7c5d42d Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 23 Dec 2008 17:31:23 +0100 Subject: USB: CDC-ACM quirk for MTK GPS This patch adds a device quirk for a MediaTek Inc GPS chipset. The device implements USB CDC ACM, but is missing the union descriptor, so the ACM class driver fails to probe the device. I've tested this patch with an iBlue A+ GPS which uses this chipset and using kernel 2.6.28-rc9. Signed-off-by: Andrew Lunn, Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5664b4afe566..f2bfae7b3984 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1352,6 +1352,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.2.3 From 296361ec3abbba7621e9fff01a572ac0873da903 Mon Sep 17 00:00:00 2001 From: sware Date: Wed, 7 Jan 2009 15:35:55 -0800 Subject: USB: remove vernier labpro from ldusb Labpro device is in both ldusb and vstusb device tables. Should only be a vstusb device. Signed-off-by: stephen ware Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ldusb.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 189a9db03509..ad4fb15b5dcb 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -57,7 +57,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */ #define USB_VENDOR_ID_VERNIER 0x08f7 -#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 @@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, -- cgit v1.2.3 From 06a743bfc42660f27fde5f24d7471e1eb4c71218 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Mon, 5 Jan 2009 08:30:39 -0800 Subject: USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440 My Brother HL-1440 would print one document before CUPS would stop printing with the error "Printer not connected; will retry in 30 seconds...". I traced this down to the CUPS usb backend getting an EIO out of usblp on the IOCNR_GET_DEVICE_ID IOCTL. Adding the USBLP_QUIRK_BIDIR fixes the problem but is it the right solution? output from strace /usr/lib/cups/backend/usb after printing a document (Note: SNDCTL_DSP_SYNC == IOCNR_GET_DEVICE_ID): before patch open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3 ioctl(3, SNDCTL_DSP_SYNC, 0x7fff2478cef0) = -1 EIO (Input/output error) after patch open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3 ioctl(3, SNDCTL_DSP_SYNC, 0x7fffb8d474c0) = 0 Possibly related bug: https://bugs.launchpad.net/ubuntu/+source/cupsys/+bug/35638 Signed-off-by: Brandon Philips Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index b5775af3ba26..3f3ee1351930 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut */ + { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ { 0, 0 } }; -- cgit v1.2.3 From 877e262c4e251352771cc391760a12665b5b210b Mon Sep 17 00:00:00 2001 From: Tomasz K Date: Sun, 4 Jan 2009 12:47:11 +0100 Subject: USB: cp2101 device My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider, PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c From: Tomasz K Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index e97eb054e38e..027f4b7dde86 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ -- cgit v1.2.3 From 45eeff848bdfac96dc77aa722dda7c6cee6184f4 Mon Sep 17 00:00:00 2001 From: Robie Basak Date: Mon, 12 Jan 2009 23:05:59 +0000 Subject: USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: Robie Basak Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c70a8f667d85..a85946b212d3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -660,6 +660,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, + { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 373ee09975bb..e4305765198d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -854,6 +854,10 @@ #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.3 From ca80801bfb24f7a41fe4fade4d2cf7c73f0b2f09 Mon Sep 17 00:00:00 2001 From: Mhayk Whandson Date: Fri, 9 Jan 2009 06:48:16 -0400 Subject: USB: ftdi_sio driver support of bar code scanner from Diebold Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: Mhayk Whandson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a85946b212d3..75597337583e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -661,6 +661,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, + { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index e4305765198d..1b62eff475d2 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -884,6 +884,11 @@ #define RATOC_VENDOR_ID 0x0584 #define RATOC_PRODUCT_ID_USB60F 0xb020 +/* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + /* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ -- cgit v1.2.3 From 7abce6bedc118eb39fe177c2c26be5d008505c14 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 20 Dec 2008 12:56:08 -0700 Subject: USB: usbmon: Implement compat_ioctl Running a 32-bit usbmon(8) on 2.6.28-rc9 produces the following: ioctl32(usbmon:28563): Unknown cmd fd(3) cmd(400c9206){t:ffffff92;sz:12} arg(ffd3f458) on /dev/usbmon0 It happens because the compatibility mode was implemented for 2.6.18 and not updated for the fsops.compat_ioctl API. This patch relocates the pieces from under #ifdef CONFIG_COMPAT into compat_ioctl with no other changes except one new whitespace. Signed-off-by: Pete Zaitcev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 105 +++++++++++++++++++++++++++++----------------- 1 file changed, 66 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index e06810aef2df..4cf27c72423e 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -37,6 +37,7 @@ #define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) + #ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) @@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; -#ifdef CONFIG_COMPAT - case MON_IOCX_GET32: { - struct mon_bin_get32 getb; - - if (copy_from_user(&getb, (void __user *)arg, - sizeof(struct mon_bin_get32))) - return -EFAULT; - - ret = mon_bin_get_event(file, rp, - compat_ptr(getb.hdr32), compat_ptr(getb.data32), - getb.alloc32); - } - break; -#endif - case MON_IOCX_MFETCH: { struct mon_bin_mfetch mfetch; @@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; + case MON_IOCG_STATS: { + struct mon_bin_stats __user *sp; + unsigned int nevents; + unsigned int ndropped; + + spin_lock_irqsave(&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + nevents = mon_bin_queued(rp); + + sp = (struct mon_bin_stats __user *)arg; + if (put_user(rp->cnt_lost, &sp->dropped)) + return -EFAULT; + if (put_user(nevents, &sp->queued)) + return -EFAULT; + + } + break; + + default: + return -ENOTTY; + } + + return ret; +} + #ifdef CONFIG_COMPAT +static long mon_bin_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mon_reader_bin *rp = file->private_data; + int ret; + + switch (cmd) { + + case MON_IOCX_GET32: { + struct mon_bin_get32 getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get32))) + return -EFAULT; + + ret = mon_bin_get_event(file, rp, + compat_ptr(getb.hdr32), compat_ptr(getb.data32), + getb.alloc32); + if (ret < 0) + return ret; + } + return 0; + case MON_IOCX_MFETCH32: { struct mon_bin_mfetch32 mfetch; @@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, return ret; if (put_user(ret, &uptr->nfetch32)) return -EFAULT; - ret = 0; } - break; -#endif - - case MON_IOCG_STATS: { - struct mon_bin_stats __user *sp; - unsigned int nevents; - unsigned int ndropped; - - spin_lock_irqsave(&rp->b_lock, flags); - ndropped = rp->cnt_lost; - rp->cnt_lost = 0; - spin_unlock_irqrestore(&rp->b_lock, flags); - nevents = mon_bin_queued(rp); + return 0; - sp = (struct mon_bin_stats __user *)arg; - if (put_user(rp->cnt_lost, &sp->dropped)) - return -EFAULT; - if (put_user(nevents, &sp->queued)) - return -EFAULT; + case MON_IOCG_STATS: + return mon_bin_ioctl(NULL, file, cmd, + (unsigned long) compat_ptr(arg)); - } - break; + case MON_IOCQ_URB_LEN: + case MON_IOCQ_RING_SIZE: + case MON_IOCT_RING_SIZE: + case MON_IOCH_MFLUSH: + return mon_bin_ioctl(NULL, file, cmd, arg); default: - return -ENOTTY; + ; } - - return ret; + return -ENOTTY; } +#endif /* CONFIG_COMPAT */ static unsigned int mon_bin_poll(struct file *file, struct poll_table_struct *wait) @@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = { /* .write = mon_text_write, */ .poll = mon_bin_poll, .ioctl = mon_bin_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mon_bin_compat_ioctl, +#endif .release = mon_bin_release, .mmap = mon_bin_mmap, }; -- cgit v1.2.3 From 649150926b01c57e45a0376cbc1d3aa98eabfde2 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Onofre Date: Sat, 20 Dec 2008 20:11:55 +0100 Subject: USB: storage: support of Dane-Elec MediaTouch USB device This adds another unusual_devs.h entry for a device that can't handle more than 64k reads/writes in a single command. Signed-off-by: Jean-Baptiste Onofre Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ec40c26bd544..c6c435899d87 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -995,6 +995,16 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), +/* Reported by Jean-Baptiste Onofre + * Support the following product : + * "Dane-Elec MediaTouch" + */ +UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, + "RockChip", + "MTP", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present -- cgit v1.2.3 From d547f13472adc99721d6eb756085276a8a342366 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 11 Jan 2009 18:46:20 +0100 Subject: USB: Remove ZTE modem from unusual_devices The ZTE modem entry causes usb-storage to ignore the device, but for some versions of the device, usb-storage mode is required to get to modem ode. For both kinds the tool: http://www.draisberghof.de/usb_modeswitch/ should work. Note that the various versions of the device have the same ProductId, VendorId, and bcdDevice number, so we cannot have the entry for some and not others. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c6c435899d87..ba16c9ed5234 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2041,16 +2041,6 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Mauro Andreolini - * This entry is needed to bypass the ZeroCD mechanism - * and to properly load as a modem device. - */ -UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, - "Onda ET502HS", - "USB MMC Storage", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_DEVICE), - UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", -- cgit v1.2.3 From 3b498a66a698c581535c0fcf1a8907f3fe9449cc Mon Sep 17 00:00:00 2001 From: Marcel Sebek Date: Sun, 28 Dec 2008 14:06:50 +0100 Subject: USB: 'option' driver - onda device MT503HS has wrong id While trying to make GSM modem Onda MT503HS working, I found a mismatch between device id in the driver code (0x0200) and id in the lsusb output (0x2000). This patch fixed it for me, but I don't know if the original device id was also correct and the new ID should be added instead of replacing the old one. Signed-off-by: Marcel Sebek Acked-by: Domenico Riccio Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ed183477aaf..19f5f0ce2cc4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -224,7 +224,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 -#define ONDA_PRODUCT_MT503HS 0x0200 +#define ONDA_PRODUCT_MT503HS 0x2000 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 -- cgit v1.2.3 From c89c60e9d6b306fb6963030abb3bd07cc3de66b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 11 Jan 2009 19:53:10 +0000 Subject: USB: cdc-acm: Add another conexant modem to the quirks Another Conexant, another device with the same quirk Signed-off-by: Alan Cox Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f2bfae7b3984..97ba4a985edc 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1376,6 +1376,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, -- cgit v1.2.3 From 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 12 Jan 2009 13:31:16 +0100 Subject: USB: new id for ti_usb_3410_5052 driver This adds a new device id Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 3 +++ drivers/usb/serial/ti_usb_3410_5052.h | 2 ++ 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3cf41df302d7..baf591137b80 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { @@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 7e4752fbf232..b7ea5dbadee5 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -27,7 +27,9 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ -- cgit v1.2.3 From 0df2479232eeea20c924350a11788c724b8c218d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 17 Jan 2009 16:52:17 +0100 Subject: USB: GADGET: fix !x & y ! has a higher precedence than & Signed-off-by: Roel Kluin Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/imx_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index cde8fdf15d5b..77c5d0a8a06e 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) for (i = 0; i < 100; i ++) { temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); - if (!temp & EPSTAT_STALL) + if (!(temp & EPSTAT_STALL)) break; udelay(20); } -- cgit v1.2.3 From a83775b1465ce80af5610cbe80216432212bc7ee Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Tue, 20 Jan 2009 23:48:36 +0100 Subject: USB: unusual_dev: usb-storage needs to ignore a device This patch adds an unusual_devs entry for a Sony Ericsson modem. Like many other modems, we have to ignore the storage device in order to access the modem. At this time usb_modeswitch does not work with this device. Reported-by: The Solutor . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ba16c9ed5234..b3353bf7a626 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1599,6 +1599,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by The Solutor */ +UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, + "Sony Ericsson", + "MD400", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* Reported by Jan Mate * and by Soeren Sonnenburg */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, -- cgit v1.2.3 From aa23c8d616c33578fb99aa6a0effd6705b5d0fa1 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Tue, 20 Jan 2009 23:42:52 +0100 Subject: USB: storage: Add another unusual_dev for off-by-one bug Argosy has released another device with the off-by-one sector. This is a harddrive with an internal cardreader which is affected. Based on a patch written by Martijn Hijdra Signed-off-by: Phil Dibowitz Cc: Martijn Hijdra Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b3353bf7a626..69269f739563 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1261,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Martijn Hijdra */ +UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore . * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with -- cgit v1.2.3 From fc91be2ad03e0d243418414a854665274d560ca2 Mon Sep 17 00:00:00 2001 From: "Alex.Cheng@quantatw.com" Date: Thu, 22 Jan 2009 16:01:57 +0800 Subject: USB: option: add QUANTA HSDPA Data Card device ids This patch adds the support for the QUANTA Q101 series HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Alex Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 19f5f0ce2cc4..6c89da9c6fea 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,13 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define QUANTA_VENDOR_ID 0x0408 +#define QUANTA_PRODUCT_Q101 0xEA02 +#define QUANTA_PRODUCT_Q111 0xEA03 +#define QUANTA_PRODUCT_GLX 0xEA04 +#define QUANTA_PRODUCT_GKE 0xEA05 +#define QUANTA_PRODUCT_GLE 0xEA06 + #define NOVATELWIRELESS_VENDOR_ID 0x1410 /* YISO PRODUCTS */ @@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, -- cgit v1.2.3 From 236dd4d18f293e3c9798f35c08272196826a980d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 10 Jan 2009 05:03:21 +0300 Subject: USB: Driver for Freescale QUICC Engine USB Host Controller This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 + drivers/usb/host/Kconfig | 17 + drivers/usb/host/Makefile | 6 + drivers/usb/host/fhci-dbg.c | 139 +++++++ drivers/usb/host/fhci-hcd.c | 836 +++++++++++++++++++++++++++++++++++++++ drivers/usb/host/fhci-hub.c | 345 ++++++++++++++++ drivers/usb/host/fhci-mem.c | 113 ++++++ drivers/usb/host/fhci-q.c | 284 ++++++++++++++ drivers/usb/host/fhci-sched.c | 888 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/fhci-tds.c | 626 +++++++++++++++++++++++++++++ drivers/usb/host/fhci.h | 607 +++++++++++++++++++++++++++++ 11 files changed, 3862 insertions(+) create mode 100644 drivers/usb/host/fhci-dbg.c create mode 100644 drivers/usb/host/fhci-hcd.c create mode 100644 drivers/usb/host/fhci-hub.c create mode 100644 drivers/usb/host/fhci-mem.c create mode 100644 drivers/usb/host/fhci-q.c create mode 100644 drivers/usb/host/fhci-sched.c create mode 100644 drivers/usb/host/fhci-tds.c create mode 100644 drivers/usb/host/fhci.h (limited to 'drivers') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7c419b876e..8bcde8cde554 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ +obj-$(CONFIG_USB_FHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5a988f4cdf87..2c63bfb1f8d9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -239,6 +239,23 @@ config USB_UHCI_HCD To compile this driver as a module, choose M here: the module will be called uhci-hcd. +config USB_FHCI_HCD + tristate "Freescale QE USB Host Controller support" + depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + select FSL_GTM + select QE_USB + help + This driver enables support for Freescale QE USB Host Controller + (as found on MPC8360 and MPC8323 processors), the driver supports + Full and Low Speed USB. + +config FHCI_DEBUG + bool "Freescale QE USB Host Controller debug support" + depends on USB_FHCI_HCD && DEBUG_FS + help + Say "y" to see some FHCI debug information and statistics + throught debugfs. + config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB && USB_FTDI_ELAN diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e5f3f20787e4..f163571e33d8 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y) endif isp1760-objs := isp1760-hcd.o isp1760-if.o +fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ + fhci-tds.o fhci-sched.o +ifeq ($(CONFIG_FHCI_DEBUG),y) +fhci-objs += fhci-dbg.o +endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o +obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c new file mode 100644 index 000000000000..34e14edf390b --- /dev/null +++ b/drivers/usb/host/fhci-dbg.c @@ -0,0 +1,139 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) +{ + int i; + + if (usb_er == -1) { + fhci->usb_irq_stat[12]++; + return; + } + + for (i = 0; i < 12; ++i) { + if (usb_er & (1 << i)) + fhci->usb_irq_stat[i]++; + } +} + +static int fhci_dfs_regs_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + struct fhci_regs __iomem *regs = fhci->regs; + + seq_printf(s, + "mode: 0x%x\n" "addr: 0x%x\n" + "command: 0x%x\n" "ep0: 0x%x\n" + "event: 0x%x\n" "mask: 0x%x\n" + "status: 0x%x\n" "SOF timer: %d\n" + "frame number: %d\n" + "lines status: 0x%x\n", + in_8(®s->usb_mod), in_8(®s->usb_addr), + in_8(®s->usb_comm), in_be16(®s->usb_ep[0]), + in_be16(®s->usb_event), in_be16(®s->usb_mask), + in_8(®s->usb_status), in_be16(®s->usb_sof_tmr), + in_be16(®s->usb_frame_num), + fhci_ioports_check_bus_state(fhci)); + + return 0; +} + +static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + int *usb_irq_stat = fhci->usb_irq_stat; + + seq_printf(s, + "RXB: %d\n" "TXB: %d\n" "BSY: %d\n" + "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n" + "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n" + "RESET: %d\n" "SFT: %d\n" "MSF: %d\n" + "IDLE_ONLY: %d\n", + usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2], + usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5], + usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8], + usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11], + usb_irq_stat[12]); + + return 0; +} + +static int fhci_dfs_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_regs_show, inode->i_private); +} + +static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_irq_stat_show, inode->i_private); +} + +static const struct file_operations fhci_dfs_regs_fops = { + .open = fhci_dfs_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations fhci_dfs_irq_stat_fops = { + .open = fhci_dfs_irq_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void fhci_dfs_create(struct fhci_hcd *fhci) +{ + struct device *dev = fhci_to_hcd(fhci)->self.controller; + + fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL); + if (!fhci->dfs_root) { + WARN_ON(1); + return; + } + + fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, + fhci->dfs_root, fhci, &fhci_dfs_regs_fops); + + fhci->dfs_irq_stat = debugfs_create_file("irq_stat", + S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); + + WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); +} + +void fhci_dfs_destroy(struct fhci_hcd *fhci) +{ + if (!fhci->dfs_root) + return; + + if (fhci->dfs_irq_stat) + debugfs_remove(fhci->dfs_irq_stat); + + if (fhci->dfs_regs) + debugfs_remove(fhci->dfs_regs); + + debugfs_remove(fhci->dfs_root); +} diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c new file mode 100644 index 000000000000..ba622cc8a9ba --- /dev/null +++ b/drivers/usb/host/fhci-hcd.c @@ -0,0 +1,836 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_start_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + /* clear frame_n */ + out_be16(&fhci->pram->frame_num, 0); + + out_be16(&fhci->regs->usb_sof_tmr, 0); + setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_stop_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + gtm_stop_timer16(fhci->timer); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +u16 fhci_get_sof_timer_count(struct fhci_usb *usb) +{ + return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12); +} + +/* initialize the endpoint zero */ +static u32 endpoint_zero_init(struct fhci_usb *usb, + enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + u32 rc; + + rc = fhci_create_ep(usb, data_mem, ring_len); + if (rc) + return rc; + + /* inilialize endpoint registers */ + fhci_init_ep_registers(usb, usb->ep0, data_mem); + + return 0; +} + +/* enable the USB interrupts */ +void fhci_usb_enable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 1) { + /* initialize the USB interrupt */ + enable_irq(fhci_to_hcd(fhci)->irq); + + /* initialize the event register and mask register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* enable the timer interrupts */ + enable_irq(fhci->timer->irq); + } else if (usb->intr_nesting_cnt > 1) + fhci_info(fhci, "unbalanced USB interrupts nesting\n"); + usb->intr_nesting_cnt--; +} + +/* diable the usb interrupt */ +void fhci_usb_disable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 0) { + /* diable the timer interrupt */ + disable_irq_nosync(fhci->timer->irq); + + /* disable the usb interrupt */ + disable_irq_nosync(fhci_to_hcd(fhci)->irq); + out_be16(&usb->fhci->regs->usb_mask, 0); + } + usb->intr_nesting_cnt++; +} + +/* enable the USB controller */ +static u32 fhci_usb_enable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + mdelay(100); + + return 0; +} + +/* disable the USB controller */ +static u32 fhci_usb_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_usb_disable_interrupt(usb); + fhci_port_disable(fhci); + + /* disable the usb controller */ + if (usb->port_status == FHCI_PORT_FULL || + usb->port_status == FHCI_PORT_LOW) + fhci_device_disconnected_interrupt(fhci); + + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + return 0; +} + +/* check the bus state by polling the QE bit on the IO ports */ +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) +{ + u8 bits = 0; + + /* check USBOE,if transmitting,exit */ + if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + return -1; + + /* check USBRP */ + if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + bits |= 0x2; + + /* check USBRN */ + if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + bits |= 0x1; + + return bits; +} + +static void fhci_mem_free(struct fhci_hcd *fhci) +{ + struct ed *ed; + struct ed *next_ed; + struct td *td; + struct td *next_td; + + list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { + list_del(&ed->node); + kfree(ed); + } + + list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { + list_del(&td->node); + kfree(td); + } + + kfree(fhci->vroot_hub); + fhci->vroot_hub = NULL; + + kfree(fhci->hc_list); + fhci->hc_list = NULL; +} + +static int fhci_mem_init(struct fhci_hcd *fhci) +{ + int i; + + fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); + if (!fhci->hc_list) + goto err; + + INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); + INIT_LIST_HEAD(&fhci->hc_list->bulk_list); + INIT_LIST_HEAD(&fhci->hc_list->iso_list); + INIT_LIST_HEAD(&fhci->hc_list->intr_list); + INIT_LIST_HEAD(&fhci->hc_list->done_list); + + fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); + if (!fhci->vroot_hub) + goto err; + + INIT_LIST_HEAD(&fhci->empty_eds); + INIT_LIST_HEAD(&fhci->empty_tds); + + /* initialize work queue to handle done list */ + fhci_tasklet.data = (unsigned long)fhci; + fhci->process_done_task = &fhci_tasklet; + + for (i = 0; i < MAX_TDS; i++) { + struct td *td; + + td = kmalloc(sizeof(*td), GFP_KERNEL); + if (!td) + goto err; + fhci_recycle_empty_td(fhci, td); + } + for (i = 0; i < MAX_EDS; i++) { + struct ed *ed; + + ed = kmalloc(sizeof(*ed), GFP_KERNEL); + if (!ed) + goto err; + fhci_recycle_empty_ed(fhci, ed); + } + + fhci->active_urbs = 0; + return 0; +err: + fhci_mem_free(fhci); + return -ENOMEM; +} + +/* destroy the fhci_usb structure */ +static void fhci_usb_free(void *lld) +{ + struct fhci_usb *usb = lld; + struct fhci_hcd *fhci = usb->fhci; + + if (usb) { + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + fhci_ep0_free(usb); + kfree(usb->actual_frame); + kfree(usb); + } +} + +/* initialize the USB */ +static int fhci_usb_init(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); + + usb->port_status = FHCI_PORT_DISABLED; + usb->max_frame_usage = FRAME_TIME_USAGE; + usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; + + usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); + if (!usb->actual_frame) { + fhci_usb_free(usb); + return -ENOMEM; + } + + INIT_LIST_HEAD(&usb->actual_frame->tds_list); + + /* initializing registers on chip, clear frame number */ + out_be16(&fhci->pram->frame_num, 0); + + /* clear rx state */ + out_be32(&fhci->pram->rx_state, 0); + + /* set mask register */ + usb->saved_msk = (USB_E_TXB_MASK | + USB_E_TXE1_MASK | + USB_E_IDLE_MASK | + USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); + + out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN); + + /* clearing the mask register */ + out_be16(&usb->fhci->regs->usb_mask, 0); + + /* initialing the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + + if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { + fhci_usb_free(usb); + return -EINVAL; + } + + return 0; +} + +/* initialize the fhci_usb struct and the corresponding data staruct */ +static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb; + + /* allocate memory for SCC data structure */ + usb = kzalloc(sizeof(*usb), GFP_KERNEL); + if (!usb) { + fhci_err(fhci, "no memory for SCC data struct\n"); + return NULL; + } + + usb->fhci = fhci; + usb->hc_list = fhci->hc_list; + usb->vroot_hub = fhci->vroot_hub; + + usb->transfer_confirm = fhci_transfer_confirm_callback; + + return usb; +} + +static int fhci_start(struct usb_hcd *hcd) +{ + int ret; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + ret = fhci_mem_init(fhci); + if (ret) { + fhci_err(fhci, "failed to allocate memory\n"); + goto err; + } + + fhci->usb_lld = fhci_create_lld(fhci); + if (!fhci->usb_lld) { + fhci_err(fhci, "low level driver config failed\n"); + ret = -ENOMEM; + goto err; + } + + ret = fhci_usb_init(fhci); + if (ret) { + fhci_err(fhci, "low level driver initialize failed\n"); + goto err; + } + + spin_lock_init(&fhci->lock); + + /* connect the virtual root hub */ + fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */ + fhci->vroot_hub->hub.wHubStatus = 0; + fhci->vroot_hub->hub.wHubChange = 0; + fhci->vroot_hub->port.wPortStatus = 0; + fhci->vroot_hub->port.wPortChange = 0; + + hcd->state = HC_STATE_RUNNING; + + /* + * From here on, khubd concurrently accesses the root + * hub; drivers will be talking to enumerated devices. + * (On restart paths, khubd already knows about the root + * hub and could find work as soon as we wrote FLAG_CF.) + * + * Before this point the HC was idle/ready. After, khubd + * and device drivers may start it running. + */ + fhci_usb_enable(fhci); + return 0; +err: + fhci_mem_free(fhci); + return ret; +} + +static void fhci_stop(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + fhci_usb_disable_interrupt(fhci->usb_lld); + fhci_usb_disable(fhci); + + fhci_usb_free(fhci->usb_lld); + fhci->usb_lld = NULL; + fhci_mem_free(fhci); +} + +static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + u32 pipe = urb->pipe; + int ret; + int i; + int size = 0; + struct urb_priv *urb_priv; + unsigned long flags; + + switch (usb_pipetype(pipe)) { + case PIPE_CONTROL: + /* 1 td fro setup,1 for ack */ + size = 2; + case PIPE_BULK: + /* one td for every 4096 bytes(can be upto 8k) */ + size += urb->transfer_buffer_length / 4096; + /* ...add for any remaining bytes... */ + if ((urb->transfer_buffer_length % 4096) != 0) + size++; + /* ..and maybe a zero length packet to wrap it up */ + if (size == 0) + size++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe, + usb_pipeout(pipe))) != 0) + size++; + break; + case PIPE_ISOCHRONOUS: + size = urb->number_of_packets; + if (size <= 0) + return -EINVAL; + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = (u32) (-EXDEV); + } + break; + case PIPE_INTERRUPT: + size = 1; + } + + /* allocate the private part of the URB */ + urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + /* allocate the private part of the URB */ + urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + if (!urb_priv->tds) { + kfree(urb_priv); + return -ENOMEM; + } + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto err; + + /* fill the private part of the URB */ + urb_priv->num_of_tds = size; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + + fhci_queue_urb(fhci, urb); +err: + if (ret) { + kfree(urb_priv->tds); + kfree(urb_priv); + } + spin_unlock_irqrestore(&fhci->lock, flags); + return ret; +} + +/* dequeue FHCI URB */ +static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + int ret = -EINVAL; + unsigned long flags; + + if (!urb || !urb->dev || !urb->dev->bus) + goto out; + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto out2; + + if (usb->port_status != FHCI_PORT_DISABLED) { + struct urb_priv *urb_priv; + + /* + * flag the urb's data for deletion in some upcoming + * SF interrupt's delete list processing + */ + urb_priv = urb->hcpriv; + + if (!urb_priv || (urb_priv->state == URB_DEL)) + goto out2; + + urb_priv->state = URB_DEL; + + /* already pending? */ + urb_priv->ed->state = FHCI_ED_URB_DEL; + } else { + fhci_urb_complete_free(fhci, urb); + } + +out2: + spin_unlock_irqrestore(&fhci->lock, flags); +out: + return ret; +} + +static void fhci_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct fhci_hcd *fhci; + struct ed *ed; + unsigned long flags; + + fhci = hcd_to_fhci(hcd); + spin_lock_irqsave(&fhci->lock, flags); + ed = ep->hcpriv; + if (ed) { + while (ed->td_head != NULL) { + struct td *td = fhci_remove_td_from_ed(ed); + fhci_urb_complete_free(fhci, td->urb); + } + fhci_recycle_empty_ed(fhci, ed); + ep->hcpriv = NULL; + } + spin_unlock_irqrestore(&fhci->lock, flags); +} + +static int fhci_get_frame_number(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + return get_frame_num(fhci); +} + +static const struct hc_driver fhci_driver = { + .description = "fsl,usb-fhci", + .product_desc = "FHCI HOST Controller", + .hcd_priv_size = sizeof(struct fhci_hcd), + + /* generic hardware linkage */ + .irq = fhci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* basic lifecycle operation */ + .start = fhci_start, + .stop = fhci_stop, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = fhci_urb_enqueue, + .urb_dequeue = fhci_urb_dequeue, + .endpoint_disable = fhci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = fhci_get_frame_number, + + /* root hub support */ + .hub_status_data = fhci_hub_status_data, + .hub_control = fhci_hub_control, +}; + +static int __devinit of_fhci_probe(struct of_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *node = ofdev->node; + struct usb_hcd *hcd; + struct fhci_hcd *fhci; + struct resource usb_regs; + unsigned long pram_addr; + unsigned int usb_irq; + const char *sprop; + const u32 *iprop; + int size; + int ret; + int i; + int j; + + if (usb_disabled()) + return -ENODEV; + + sprop = of_get_property(node, "mode", NULL); + if (sprop && strcmp(sprop, "host")) + return -ENODEV; + + hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id); + if (!hcd) { + dev_err(dev, "could not create hcd\n"); + return -ENOMEM; + } + + fhci = hcd_to_fhci(hcd); + hcd->self.controller = dev; + dev_set_drvdata(dev, hcd); + + iprop = of_get_property(node, "hub-power-budget", &size); + if (iprop && size == sizeof(*iprop)) + hcd->power_budget = *iprop; + + /* FHCI registers. */ + ret = of_address_to_resource(node, 0, &usb_regs); + if (ret) { + dev_err(dev, "could not get regs\n"); + goto err_regs; + } + + hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1); + if (!hcd->regs) { + dev_err(dev, "could not ioremap regs\n"); + ret = -ENOMEM; + goto err_regs; + } + fhci->regs = hcd->regs; + + /* Parameter RAM. */ + iprop = of_get_property(node, "reg", &size); + if (!iprop || size < sizeof(*iprop) * 4) { + dev_err(dev, "can't get pram offset\n"); + ret = -EINVAL; + goto err_pram; + } + + pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + if (IS_ERR_VALUE(pram_addr)) { + dev_err(dev, "failed to allocate usb pram\n"); + ret = -ENOMEM; + goto err_pram; + } + fhci->pram = cpm_muram_addr(pram_addr); + + /* GPIOs and pins */ + for (i = 0; i < NUM_GPIOS; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(node, i, &flags); + fhci->gpios[i] = gpio; + fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; + + if (!gpio_is_valid(gpio)) { + if (i < GPIO_SPEED) { + dev_err(dev, "incorrect GPIO%d: %d\n", + i, gpio); + goto err_gpios; + } else { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); + continue; + } + } + + ret = gpio_request(gpio, dev->bus_id); + if (ret) { + dev_err(dev, "failed to request gpio %d", i); + goto err_gpios; + } + + if (i >= GPIO_SPEED) { + ret = gpio_direction_output(gpio, 0); + if (ret) { + dev_err(dev, "failed to set gpio %d as " + "an output\n", i); + i++; + goto err_gpios; + } + } + } + + for (j = 0; j < NUM_PINS; j++) { + fhci->pins[j] = qe_pin_request(ofdev->node, j); + if (IS_ERR(fhci->pins[j])) { + ret = PTR_ERR(fhci->pins[j]); + dev_err(dev, "can't get pin %d: %d\n", j, ret); + goto err_pins; + } + } + + /* Frame limit timer and its interrupt. */ + fhci->timer = gtm_get_timer16(); + if (IS_ERR(fhci->timer)) { + ret = PTR_ERR(fhci->timer); + dev_err(dev, "failed to request qe timer: %i", ret); + goto err_get_timer; + } + + ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, + IRQF_DISABLED, "qe timer (usb)", hcd); + if (ret) { + dev_err(dev, "failed to request timer irq"); + goto err_timer_irq; + } + + /* USB Host interrupt. */ + usb_irq = irq_of_parse_and_map(node, 0); + if (usb_irq == NO_IRQ) { + dev_err(dev, "could not get usb irq\n"); + ret = -EINVAL; + goto err_usb_irq; + } + + /* Clocks. */ + sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); + if (sprop) { + fhci->fullspeed_clk = qe_clock_source(sprop); + if (fhci->fullspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong fullspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); + if (sprop) { + fhci->lowspeed_clk = qe_clock_source(sprop); + if (fhci->lowspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong lowspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + if (fhci->fullspeed_clk == QE_CLK_NONE && + fhci->lowspeed_clk == QE_CLK_NONE) { + dev_err(dev, "no clocks specified\n"); + ret = -EINVAL; + goto err_clocks; + } + + dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); + + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + + /* Start with full-speed, if possible. */ + if (fhci->fullspeed_clk != QE_CLK_NONE) { + fhci_config_transceiver(fhci, FHCI_PORT_FULL); + qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + } else { + fhci_config_transceiver(fhci, FHCI_PORT_LOW); + qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + } + + /* Clear and disable any pending interrupts. */ + out_be16(&fhci->regs->usb_event, 0xffff); + out_be16(&fhci->regs->usb_mask, 0); + + ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED); + if (ret < 0) + goto err_add_hcd; + + fhci_dfs_create(fhci); + + return 0; + +err_add_hcd: +err_clocks: + irq_dispose_mapping(usb_irq); +err_usb_irq: + free_irq(fhci->timer->irq, hcd); +err_timer_irq: + gtm_put_timer16(fhci->timer); +err_get_timer: +err_pins: + while (--j >= 0) + qe_pin_free(fhci->pins[j]); +err_gpios: + while (--i >= 0) { + if (gpio_is_valid(fhci->gpios[i])) + gpio_free(fhci->gpios[i]); + } + cpm_muram_free(pram_addr); +err_pram: + iounmap(hcd->regs); +err_regs: + usb_put_hcd(hcd); + return ret; +} + +static int __devexit fhci_remove(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int i; + int j; + + usb_remove_hcd(hcd); + free_irq(fhci->timer->irq, hcd); + gtm_put_timer16(fhci->timer); + cpm_muram_free(cpm_muram_offset(fhci->pram)); + for (i = 0; i < NUM_GPIOS; i++) { + if (!gpio_is_valid(fhci->gpios[i])) + continue; + gpio_free(fhci->gpios[i]); + } + for (j = 0; j < NUM_PINS; j++) + qe_pin_free(fhci->pins[j]); + fhci_dfs_destroy(fhci); + usb_put_hcd(hcd); + return 0; +} + +static int __devexit of_fhci_remove(struct of_device *ofdev) +{ + return fhci_remove(&ofdev->dev); +} + +static struct of_device_id of_fhci_match[] = { + { .compatible = "fsl,mpc8323-qe-usb", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_fhci_match); + +static struct of_platform_driver of_fhci_driver = { + .name = "fsl,usb-fhci", + .match_table = of_fhci_match, + .probe = of_fhci_probe, + .remove = __devexit_p(of_fhci_remove), +}; + +static int __init fhci_module_init(void) +{ + return of_register_platform_driver(&of_fhci_driver); +} +module_init(fhci_module_init); + +static void __exit fhci_module_exit(void) +{ + of_unregister_platform_driver(&of_fhci_driver); +} +module_exit(fhci_module_exit); + +MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); +MODULE_AUTHOR("Shlomi Gridish , " + "Jerry Huang , " + "Anton Vorontsov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c new file mode 100644 index 000000000000..0cfaedc3e124 --- /dev/null +++ b/drivers/usb/host/fhci-hub.c @@ -0,0 +1,345 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +/* virtual root hub specific descriptor */ +static u8 root_hub_des[] = { + 0x09, /* blength */ + 0x29, /* bDescriptorType;hub-descriptor */ + 0x01, /* bNbrPorts */ + 0x00, /* wHubCharacteristics */ + 0x00, + 0x01, /* bPwrOn2pwrGood;2ms */ + 0x00, /* bHubContrCurrent;0mA */ + 0x00, /* DeviceRemoveable */ + 0xff, /* PortPwrCtrlMask */ +}; + +static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) +{ + int gpio = fhci->gpios[gpio_nr]; + bool alow = fhci->alow_gpios[gpio_nr]; + + if (!gpio_is_valid(gpio)) + return; + + gpio_set_value(gpio, on ^ alow); + mdelay(5); +} + +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status) +{ + fhci_dbg(fhci, "-> %s: %d\n", __func__, status); + + switch (status) { + case FHCI_PORT_POWER_OFF: + fhci_gpio_set_value(fhci, GPIO_POWER, false); + break; + case FHCI_PORT_DISABLED: + case FHCI_PORT_WAITING: + fhci_gpio_set_value(fhci, GPIO_POWER, true); + break; + case FHCI_PORT_LOW: + fhci_gpio_set_value(fhci, GPIO_SPEED, false); + break; + case FHCI_PORT_FULL: + fhci_gpio_set_value(fhci, GPIO_SPEED, true); + break; + default: + WARN_ON(1); + break; + } + + fhci_dbg(fhci, "<- %s: %d\n", __func__, status); +} + +/* disable the USB port by clearing the EN bit in the USBMOD register */ +void fhci_port_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; + enum fhci_port_status port_status; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + + fhci_flush_all_transmissions(usb); + + fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); + port_status = usb->port_status; + usb->port_status = FHCI_PORT_DISABLED; + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* check if during the disconnection process attached new device */ + if (port_status == FHCI_PORT_WAITING) + fhci_device_connected_interrupt(fhci); + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* enable the USB port by setting the EN bit in the USBMOD register */ +void fhci_port_enable(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_config_transceiver(fhci, usb->port_status); + + if ((usb->port_status != FHCI_PORT_FULL) && + (usb->port_status != FHCI_PORT_LOW)) + fhci_start_sof_timer(fhci); + + usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_io_port_generate_reset(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + + mdelay(5); + + qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* generate the RESET condition on the bus */ +void fhci_port_reset(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + u8 mode; + u16 mask; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + /* disable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); + + /* disable idle interrupts */ + mask = in_be16(&fhci->regs->usb_mask); + out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); + + fhci_io_port_generate_reset(fhci); + + /* enable interrupt on this endpoint */ + out_be16(&fhci->regs->usb_mask, mask); + + /* enable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); + fhci_start_sof_timer(fhci); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int ret = 0; + unsigned long flags; + + fhci_dbg(fhci, "-> %s\n", __func__); + + spin_lock_irqsave(&fhci->lock, flags); + + if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { + *buf = 1 << 1; + ret = 1; + fhci_dbg(fhci, "-- %s\n", __func__); + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + fhci_dbg(fhci, "<- %s\n", __func__); + + return ret; +} + +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int retval = 0; + int len = 0; + struct usb_hub_status *hub_status; + struct usb_port_status *port_status; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + fhci_dbg(fhci, "-> %s\n", __func__); + + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + break; + default: + goto error; + } + break; + case ClearPortFeature: + fhci->vroot_hub->feature &= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_ENABLE; + fhci_port_disable(fhci); + break; + case USB_PORT_FEAT_C_ENABLE: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_C_SUSPEND: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + break; + case USB_PORT_FEAT_C_CONNECTION: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_OVERCURRENT; + break; + case USB_PORT_FEAT_C_RESET: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_RESET; + break; + default: + goto error; + } + break; + case GetHubDescriptor: + memcpy(buf, root_hub_des, sizeof(root_hub_des)); + buf[3] = 0x11; /* per-port power, no ovrcrnt */ + len = (buf[0] < wLength) ? buf[0] : wLength; + break; + case GetHubStatus: + hub_status = (struct usb_hub_status *)buf; + hub_status->wHubStatus = + cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); + hub_status->wHubChange = + cpu_to_le16(fhci->vroot_hub->hub.wHubChange); + len = 4; + break; + case GetPortStatus: + port_status = (struct usb_port_status *)buf; + port_status->wPortStatus = + cpu_to_le16(fhci->vroot_hub->port.wPortStatus); + port_status->wPortChange = + cpu_to_le16(fhci->vroot_hub->port.wPortChange); + len = 4; + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case SetPortFeature: + fhci->vroot_hub->feature |= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci_port_enable(fhci->usb_lld); + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_RESET: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_RESET; + fhci_port_reset(fhci->usb_lld); + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_RESET; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_WAITING); + break; + default: + goto error; + } + break; + default: +error: + retval = -EPIPE; + } + + fhci_dbg(fhci, "<- %s\n", __func__); + + spin_unlock_irqrestore(&fhci->lock, flags); + + return retval; +} diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c new file mode 100644 index 000000000000..2c0736c99712 --- /dev/null +++ b/drivers/usb/host/fhci-mem.c @@ -0,0 +1,113 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +static void init_td(struct td *td) +{ + memset(td, 0, sizeof(*td)); + INIT_LIST_HEAD(&td->node); + INIT_LIST_HEAD(&td->frame_lh); +} + +static void init_ed(struct ed *ed) +{ + memset(ed, 0, sizeof(*ed)); + INIT_LIST_HEAD(&ed->td_list); + INIT_LIST_HEAD(&ed->node); +} + +static struct td *get_empty_td(struct fhci_hcd *fhci) +{ + struct td *td; + + if (!list_empty(&fhci->empty_tds)) { + td = list_entry(fhci->empty_tds.next, struct td, node); + list_del(fhci->empty_tds.next); + } else { + td = kmalloc(sizeof(*td), GFP_ATOMIC); + if (!td) + fhci_err(fhci, "No memory to allocate to TD\n"); + else + init_td(td); + } + + return td; +} + +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td) +{ + init_td(td); + list_add(&td->node, &fhci->empty_tds); +} + +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci) +{ + struct ed *ed; + + if (!list_empty(&fhci->empty_eds)) { + ed = list_entry(fhci->empty_eds.next, struct ed, node); + list_del(fhci->empty_eds.next); + } else { + ed = kmalloc(sizeof(*ed), GFP_ATOMIC); + if (!ed) + fhci_err(fhci, "No memory to allocate to ED\n"); + else + init_ed(ed); + } + + return ed; +} + +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed) +{ + init_ed(ed); + list_add(&ed->node, &fhci->empty_eds); +} + +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc) +{ + struct td *td = get_empty_td(fhci); + + if (!td) + return NULL; + + td->urb = urb; + td->ed = ed; + td->type = type; + td->toggle = toggle; + td->data = data; + td->len = len; + td->iso_index = index; + td->interval = interval; + td->start_frame = start_frame; + td->ioc = ioc; + td->status = USB_TD_OK; + + urb_priv->tds[index] = td; + + return td; +} diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c new file mode 100644 index 000000000000..b0a1446ba292 --- /dev/null +++ b/drivers/usb/host/fhci-q.c @@ -0,0 +1,284 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +/* maps the hardware error code to the USB error code */ +static int status_to_error(u32 status) +{ + if (status == USB_TD_OK) + return 0; + else if (status & USB_TD_RX_ER_CRC) + return -EILSEQ; + else if (status & USB_TD_RX_ER_NONOCT) + return -EPROTO; + else if (status & USB_TD_RX_ER_OVERUN) + return -ECOMM; + else if (status & USB_TD_RX_ER_BITSTUFF) + return -EPROTO; + else if (status & USB_TD_RX_ER_PID) + return -EILSEQ; + else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT)) + return -ETIMEDOUT; + else if (status & USB_TD_TX_ER_STALL) + return -EPIPE; + else if (status & USB_TD_TX_ER_UNDERUN) + return -ENOSR; + else if (status & USB_TD_RX_DATA_UNDERUN) + return -EREMOTEIO; + else if (status & USB_TD_RX_DATA_OVERUN) + return -EOVERFLOW; + else + return -EINVAL; +} + +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td) +{ + list_add_tail(&td->frame_lh, &frame->tds_list); +} + +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number) +{ + int i; + + for (i = 0; i < number; i++) { + struct td *td = td_list[i]; + list_add_tail(&td->node, &ed->td_list); + } + if (ed->td_head == NULL) + ed->td_head = td_list[0]; +} + +static struct td *peek_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) + td = list_entry(ed->td_list.next, struct td, node); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) { + td = list_entry(frame->tds_list.next, struct td, frame_lh); + list_del_init(frame->tds_list.next); + } else + td = NULL; + + return td; +} + +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) + td = list_entry(frame->tds_list.next, struct td, frame_lh); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) { + td = list_entry(ed->td_list.next, struct td, node); + list_del_init(ed->td_list.next); + + /* if this TD was the ED's head, find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, + node); + else + ed->td_head = NULL; + } else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list) +{ + struct td *td; + + if (!list_empty(&p_list->done_list)) { + td = list_entry(p_list->done_list.next, struct td, node); + list_del_init(p_list->done_list.next); + } else + td = NULL; + + return td; +} + +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed) +{ + struct td *td; + + td = ed->td_head; + list_del_init(&td->node); + + /* If this TD was the ED's head,find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else { + ed->td_head = NULL; + ed->state = FHCI_ED_SKIP; + } + ed->toggle_carry = td->toggle; + list_add_tail(&td->node, &usb->hc_list->done_list); + if (td->ioc) + usb->transfer_confirm(usb->fhci); +} + +/* free done FHCI URB resource such as ED and TD */ +static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb) +{ + int i; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = urb_priv->ed; + + for (i = 0; i < urb_priv->num_of_tds; i++) { + list_del_init(&urb_priv->tds[i]->node); + fhci_recycle_empty_td(fhci, urb_priv->tds[i]); + } + + /* if this TD was the ED's head,find the next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else + ed->td_head = NULL; + + kfree(urb_priv->tds); + kfree(urb_priv); + urb->hcpriv = NULL; + + /* if this TD was the ED's head,find next TD */ + if (ed->td_head == NULL) + list_del_init(&ed->node); + fhci->active_urbs--; +} + +/* this routine called to complete and free done URB */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb) +{ + free_urb_priv(fhci, urb); + + if (urb->status == -EINPROGRESS) { + if (urb->actual_length != urb->transfer_buffer_length && + urb->transfer_flags & URB_SHORT_NOT_OK) + urb->status = -EREMOTEIO; + else + urb->status = 0; + } + + usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb); + + spin_unlock(&fhci->lock); + + usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status); + + spin_lock(&fhci->lock); +} + +/* + * caculate transfer length/stats and update the urb + * Precondition: irqsafe(only for urb-?status locking) + */ +void fhci_done_td(struct urb *urb, struct td *td) +{ + struct ed *ed = td->ed; + u32 cc = td->status; + + /* ISO...drivers see per-TD length/status */ + if (ed->mode == FHCI_TF_ISO) { + u32 len; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK && + cc == USB_TD_RX_DATA_UNDERUN)) + cc = USB_TD_OK; + + if (usb_pipeout(urb->pipe)) + len = urb->iso_frame_desc[td->iso_index].length; + else + len = td->actual_len; + + urb->actual_length += len; + urb->iso_frame_desc[td->iso_index].actual_length = len; + urb->iso_frame_desc[td->iso_index].status = + status_to_error(cc); + } + + /* BULK,INT,CONTROL... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + else { + if (td->error_cnt >= 3) + urb->error_count = 3; + + /* control endpoint only have soft stalls */ + + /* update packet status if needed(short may be ok) */ + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) && + cc == USB_TD_RX_DATA_UNDERUN) { + ed->state = FHCI_ED_OPER; + cc = USB_TD_OK; + } + if (cc != USB_TD_OK) { + if (urb->status == -EINPROGRESS) + urb->status = status_to_error(cc); + } + + /* count all non-empty packets except control SETUP packet */ + if (td->type != FHCI_TA_SETUP || td->iso_index != 0) + urb->actual_length += td->actual_len; + } +} + +/* there are some pedning request to unlink */ +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed) +{ + struct td *td = peek_td_from_ed(ed); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + + if (urb_priv->state == URB_DEL) { + td = fhci_remove_td_from_ed(ed); + /* HC may have partly processed this TD */ + if (td->status != USB_TD_INPROGRESS) + fhci_done_td(urb, td); + + /* URB is done;clean up */ + if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds) + fhci_urb_complete_free(fhci, urb); + } +} diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c new file mode 100644 index 000000000000..bb63b68ddb77 --- /dev/null +++ b/drivers/usb/host/fhci-sched.c @@ -0,0 +1,888 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) +{ + pkt->data = NULL; + pkt->len = 0; + pkt->status = USB_TD_OK; + pkt->info = 0; + pkt->priv_data = NULL; + + cq_put(usb->ep0->empty_frame_Q, pkt); +} + +/* confirm submitted packet */ +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) +{ + struct td *td; + struct packet *td_pkt; + struct ed *ed; + u32 trans_len; + bool td_done = false; + + td = fhci_remove_td_from_frame(usb->actual_frame); + td_pkt = td->pkt; + trans_len = pkt->len; + td->status = pkt->status; + if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) { + if ((td->data + td->actual_len) && trans_len) + memcpy(td->data + td->actual_len, pkt->data, + trans_len); + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + } + + recycle_frame(usb, pkt); + + ed = td->ed; + if (ed->mode == FHCI_TF_ISO) { + if (ed->td_list.next->next != &ed->td_list) { + struct td *td_next = + list_entry(ed->td_list.next->next, struct td, + node); + + td_next->start_frame = usb->actual_frame->frame_num; + } + td->actual_len = trans_len; + td_done = true; + } else if ((td->status & USB_TD_ERROR) && + !(td->status & USB_TD_TX_ER_NAK)) { + /* + * There was an error on the transaction (but not NAK). + * If it is fatal error (data underrun, stall, bad pid or 3 + * errors exceeded), mark this TD as done. + */ + if ((td->status & USB_TD_RX_DATA_UNDERUN) || + (td->status & USB_TD_TX_ER_STALL) || + (td->status & USB_TD_RX_ER_PID) || + (++td->error_cnt >= 3)) { + ed->state = FHCI_ED_HALTED; + td_done = true; + + if (td->status & USB_TD_RX_DATA_UNDERUN) { + fhci_dbg(usb->fhci, "td err fu\n"); + td->toggle = !td->toggle; + td->actual_len += trans_len; + } else { + fhci_dbg(usb->fhci, "td err f!u\n"); + } + } else { + fhci_dbg(usb->fhci, "td err !f\n"); + /* it is not a fatal error -retry this transaction */ + td->nak_cnt = 0; + td->error_cnt++; + td->status = USB_TD_OK; + } + } else if (td->status & USB_TD_TX_ER_NAK) { + /* there was a NAK response */ + fhci_vdbg(usb->fhci, "td nack\n"); + td->nak_cnt++; + td->error_cnt = 0; + td->status = USB_TD_OK; + } else { + /* there was no error on transaction */ + td->error_cnt = 0; + td->nak_cnt = 0; + td->toggle = !td->toggle; + td->actual_len += trans_len; + + if (td->len == td->actual_len) + td_done = true; + } + + if (td_done) + fhci_move_td_from_ed_to_done_list(usb, ed); +} + +/* + * Flush all transmitted packets from BDs + * This routine is called when disabling the USB port to flush all + * transmissions that are allready scheduled in the BDs + */ +void fhci_flush_all_transmissions(struct fhci_usb *usb) +{ + u8 mode; + struct td *td; + + mode = in_8(&usb->fhci->regs->usb_mod); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + fhci_flush_bds(usb); + + while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) { + struct packet *pkt = td->pkt; + + pkt->status = USB_TD_TX_ER_TIMEOUT; + fhci_transaction_confirm(usb, pkt); + } + + usb->actual_frame->frame_status = FRAME_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* + * This function forms the packet and transmit the packet. This function + * will handle all endpoint type:ISO,interrupt,control and bulk + */ +static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) +{ + u32 fw_transaction_time, len = 0; + struct packet *pkt; + u8 *data = NULL; + + /* calcalate data address,len and toggle and then add the transaction */ + if (td->toggle == USB_TD_TOGGLE_CARRY) + td->toggle = ed->toggle_carry; + + switch (ed->mode) { + case FHCI_TF_ISO: + len = td->len; + if (td->type != FHCI_TA_IN) + data = td->data; + break; + case FHCI_TF_CTRL: + case FHCI_TF_BULK: + len = min(td->len - td->actual_len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((len + td->actual_len) == td->len))) + data = td->data + td->actual_len; + break; + case FHCI_TF_INTR: + len = min(td->len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((td->len + CRC_SIZE) >= ed->max_pkt_size))) + data = td->data; + break; + default: + break; + } + + if (usb->port_status == FHCI_PORT_FULL) + fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4); + else + fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6); + + /* check if there's enough space in this frame to submit this TD */ + if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >= + usb->max_bytes_per_frame) { + fhci_vdbg(usb->fhci, "not enough space in this frame: " + "%d %d %d\n", usb->actual_frame->total_bytes, len, + usb->max_bytes_per_frame); + return -1; + } + + /* check if there's enough time in this frame to submit this TD */ + if (usb->actual_frame->frame_status != FRAME_IS_PREPARED && + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION || + (fw_transaction_time + usb->sw_transaction_time >= + 1000 - fhci_get_sof_timer_count(usb)))) { + fhci_dbg(usb->fhci, "not enough time in this frame\n"); + return -1; + } + + /* update frame object fields before transmitting */ + pkt = cq_get(usb->ep0->empty_frame_Q); + if (!pkt) { + fhci_dbg(usb->fhci, "there is no empty frame\n"); + return -1; + } + td->pkt = pkt; + + pkt->info = 0; + if (data == NULL) { + data = cq_get(usb->ep0->dummy_packets_Q); + BUG_ON(!data); + pkt->info = PKT_DUMMY_PACKET; + } + pkt->data = data; + pkt->len = len; + pkt->status = USB_TD_OK; + /* update TD status field before transmitting */ + td->status = USB_TD_INPROGRESS; + /* update actual frame time object with the actual transmission */ + usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD); + fhci_add_td_to_frame(usb->actual_frame, td); + + if (usb->port_status != FHCI_PORT_FULL && + usb->port_status != FHCI_PORT_LOW) { + pkt->status = USB_TD_TX_ER_TIMEOUT; + pkt->len = 0; + fhci_transaction_confirm(usb, pkt); + } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr, + ed->ep_addr, ed->mode, ed->speed, td->toggle)) { + /* remove TD from actual frame */ + list_del_init(&td->frame_lh); + td->status = USB_TD_OK; + if (pkt->info & PKT_DUMMY_PACKET) + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + recycle_frame(usb, pkt); + usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); + fhci_err(usb->fhci, "host transaction failed\n"); + return -1; + } + + return len; +} + +static void move_head_to_tail(struct list_head *list) +{ + struct list_head *node = list->next; + + if (!list_empty(list)) { + list_del(node); + list_add_tail(node, list); + } +} + +/* + * This function goes through the endpoint list and schedules the + * transactions within this list + */ +static int scan_ed_list(struct fhci_usb *usb, + struct list_head *list, enum fhci_tf_mode list_type) +{ + static const int frame_part[4] = { + [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME, + [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100, + [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME, + [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100 + }; + struct ed *ed; + struct td *td; + int ans = 1; + u32 save_transaction_time = usb->sw_transaction_time; + + list_for_each_entry(ed, list, node) { + td = ed->td_head; + + if (!td || (td && td->status == USB_TD_INPROGRESS)) + continue; + + if (ed->state != FHCI_ED_OPER) { + if (ed->state == FHCI_ED_URB_DEL) { + td->status = USB_TD_OK; + fhci_move_td_from_ed_to_done_list(usb, ed); + ed->state = FHCI_ED_SKIP; + } + continue; + } + + /* + * if it isn't interrupt pipe or it is not iso pipe and the + * interval time passed + */ + if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) && + (((usb->actual_frame->frame_num - + td->start_frame) & 0x7ff) < td->interval)) + continue; + + if (add_packet(usb, ed, td) < 0) + continue; + + /* update time stamps in the TD */ + td->start_frame = usb->actual_frame->frame_num; + usb->sw_transaction_time += save_transaction_time; + + if (usb->actual_frame->total_bytes >= + usb->max_bytes_per_frame) { + usb->actual_frame->frame_status = + FRAME_DATA_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + ans = 0; + break; + } + + if (usb->actual_frame->total_bytes >= frame_part[list_type]) + break; + } + + /* be fair to each ED(move list head around) */ + move_head_to_tail(list); + usb->sw_transaction_time = save_transaction_time; + + return ans; +} + +static u32 rotate_frames(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (!list_empty(&usb->actual_frame->tds_list)) { + if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) - + usb->actual_frame->frame_num) & 0x7ff) > 5) + fhci_flush_actual_frame(usb); + else + return -EINVAL; + } + + usb->actual_frame->frame_status = FRAME_IS_PREPARED; + usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff; + usb->actual_frame->total_bytes = 0; + + return 0; +} + +/* + * This function schedule the USB transaction and will process the + * endpoint in the following order: iso, interrupt, control and bulk. + */ +void fhci_schedule_transactions(struct fhci_usb *usb) +{ + int left = 1; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + if (rotate_frames(usb) != 0) + return; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + return; + + if (usb->actual_frame->total_bytes == 0) { + /* + * schedule the next available ISO transfer + *or next stage of the ISO transfer + */ + scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO); + + /* + * schedule the next available interrupt transfer or + * the next stage of the interrupt transfer + */ + scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR); + + /* + * schedule the next available control transfer + * or the next stage of the control transfer + */ + left = scan_ed_list(usb, &usb->hc_list->ctrl_list, + FHCI_TF_CTRL); + } + + /* + * schedule the next available bulk transfer or the next stage of the + * bulk transfer + */ + if (left > 0) + scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK); +} + +/* Handles SOF interrupt */ +static void sof_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + if ((usb->port_status == FHCI_PORT_DISABLED) && + (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) && + !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) { + if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED) + usb->port_status = FHCI_PORT_LOW; + else + usb->port_status = FHCI_PORT_FULL; + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + } + + gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false); + + fhci_host_transmit_actual_frame(usb); + usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED; + + fhci_schedule_transactions(usb); +} + +/* Handles device disconnected interrupt on port */ +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->port_status = FHCI_PORT_DISABLED; + + fhci_stop_sof_timer(fhci); + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = 0; + fhci_usb_enable_interrupt(usb); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* detect a new device connected on the USB port */ +void fhci_device_connected_interrupt(struct fhci_hcd *fhci) +{ + + struct fhci_usb *usb = fhci->usb_lld; + int state; + int ret; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + state = fhci_ioports_check_bus_state(fhci); + + /* low-speed device was connected to the USB port */ + if (state == 1) { + ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + if (ret) { + fhci_warn(fhci, "Low-Speed device is not supported, " + "try use BRGx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_LOW; + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus |= + (USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_CONNECTION); + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = + (MAX_BYTES_PER_FRAME >> 3) - 7; + fhci_port_enable(usb); + } else if (state == 2) { + ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + if (ret) { + fhci_warn(fhci, "Full-Speed device is not supported, " + "try use CLKx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_FULL; + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_LOW_SPEED; + usb->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15); + fhci_port_enable(usb); + } +out: + fhci_usb_enable_interrupt(usb); + fhci_dbg(fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd) +{ + struct usb_hcd *hcd = _hcd; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + + spin_lock(&fhci->lock); + + gtm_set_exact_timer16(fhci->timer, 1000, false); + + if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) { + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + } + + fhci_schedule_transactions(usb); + + spin_unlock(&fhci->lock); + + return IRQ_HANDLED; +} + +/* Cancel transmission on the USB endpoint */ +static void abort_transmission(struct fhci_usb *usb) +{ + fhci_dbg(usb->fhci, "-> %s\n", __func__); + /* issue stop Tx command */ + qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + /* flush Tx FIFOs */ + out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO); + udelay(1000); + /* reset Tx BDs */ + fhci_flush_bds(usb); + /* issue restart Tx command */ + qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + fhci_dbg(usb->fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_irq(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb; + u16 usb_er = 0; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + usb = fhci->usb_lld; + + usb_er |= in_be16(&usb->fhci->regs->usb_event) & + in_be16(&usb->fhci->regs->usb_mask); + + /* clear event bits for next time */ + out_be16(&usb->fhci->regs->usb_event, usb_er); + + fhci_dbg_isr(fhci, usb_er); + + if (usb_er & USB_E_RESET_MASK) { + if ((usb->port_status == FHCI_PORT_FULL) || + (usb->port_status == FHCI_PORT_LOW)) { + fhci_device_disconnected_interrupt(fhci); + usb_er &= ~USB_E_IDLE_MASK; + } else if (usb->port_status == FHCI_PORT_WAITING) { + usb->port_status = FHCI_PORT_DISCONNECTING; + + /* Turn on IDLE since we want to disconnect */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_event, + usb->saved_msk); + } else if (usb->port_status == FHCI_PORT_DISABLED) { + if (fhci_ioports_check_bus_state(fhci) == 1 && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) + fhci_device_connected_interrupt(fhci); + } + usb_er &= ~USB_E_RESET_MASK; + } + + if (usb_er & USB_E_MSF_MASK) { + abort_transmission(fhci->usb_lld); + usb_er &= ~USB_E_MSF_MASK; + } + + if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) { + sof_interrupt(fhci); + usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK); + } + + if (usb_er & USB_E_TXB_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXB_MASK; + } + + if (usb_er & USB_E_TXE1_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXE1_MASK; + } + + if (usb_er & USB_E_IDLE_MASK) { + if (usb->port_status == FHCI_PORT_DISABLED && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) { + usb_er &= ~USB_E_RESET_MASK; + fhci_device_connected_interrupt(fhci); + } else if (usb->port_status == + FHCI_PORT_DISCONNECTING) { + /* XXX usb->port_status = FHCI_PORT_WAITING; */ + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, + usb->saved_msk); + } else { + fhci_dbg_isr(fhci, -1); + } + + usb_er &= ~USB_E_IDLE_MASK; + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + return IRQ_HANDLED; +} + + +/* + * Process normal completions(error or sucess) and clean the schedule. + * + * This is the main path for handing urbs back to drivers. The only other patth + * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning + * the (re-reversed) done list as this does. + */ +static void process_done_list(unsigned long data) +{ + struct urb *urb; + struct ed *ed; + struct td *td; + struct urb_priv *urb_priv; + struct fhci_hcd *fhci = (struct fhci_hcd *)data; + + disable_irq(fhci->timer->irq); + disable_irq(fhci_to_hcd(fhci)->irq); + spin_lock(&fhci->lock); + + td = fhci_remove_td_from_done_list(fhci->hc_list); + while (td != NULL) { + urb = td->urb; + urb_priv = urb->hcpriv; + ed = td->ed; + + /* update URB's length and status from TD */ + fhci_done_td(urb, td); + urb_priv->tds_cnt++; + + /* + * if all this urb's TDs are done, call complete() + * Interrupt transfers are the onley special case: + * they are reissued,until "deleted" by usb_unlink_urb + * (real work done in a SOF intr, by process_del_list) + */ + if (urb_priv->tds_cnt == urb_priv->num_of_tds) { + fhci_urb_complete_free(fhci, urb); + } else if (urb_priv->state == URB_DEL && + ed->state == FHCI_ED_SKIP) { + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } else if (ed->state == FHCI_ED_HALTED) { + urb_priv->state = URB_DEL; + ed->state = FHCI_ED_URB_DEL; + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } + + td = fhci_remove_td_from_done_list(fhci->hc_list); + } + + spin_unlock(&fhci->lock); + enable_irq(fhci->timer->irq); + enable_irq(fhci_to_hcd(fhci)->irq); +} + +DECLARE_TASKLET(fhci_tasklet, process_done_list, 0); + +/* transfer complted callback */ +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci) +{ + if (!fhci->process_done_task->state) + tasklet_schedule(fhci->process_done_task); + return 0; +} + +/* + * adds urb to the endpoint descriptor list + * arguments: + * fhci data structure for the Low level host controller + * ep USB Host endpoint data structure + * urb USB request block data structure + */ +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) +{ + struct ed *ed = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + u32 data_len = urb->transfer_buffer_length; + int urb_state = 0; + int toggle = 0; + struct td *td; + u8 *data; + u16 cnt = 0; + + if (ed == NULL) { + ed = fhci_get_empty_ed(fhci); + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->ep_addr = usb_pipeendpoint(urb->pipe); + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ed->mode = FHCI_TF_CTRL; + break; + case PIPE_BULK: + ed->mode = FHCI_TF_BULK; + break; + case PIPE_INTERRUPT: + ed->mode = FHCI_TF_INTR; + break; + case PIPE_ISOCHRONOUS: + ed->mode = FHCI_TF_ISO; + break; + default: + break; + } + ed->speed = (urb->dev->speed == USB_SPEED_LOW) ? + FHCI_LOW_SPEED : FHCI_FULL_SPEED; + ed->max_pkt_size = usb_maxpacket(urb->dev, + urb->pipe, usb_pipeout(urb->pipe)); + urb->ep->hcpriv = ed; + fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n", + ed->speed, ed->max_pkt_size); + } + + /* for ISO transfer calculate start frame index */ + if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP) + urb->start_frame = ed->td_head ? ed->last_iso + 1 : + get_frame_num(fhci); + + /* + * OHCI handles the DATA toggle itself,we just use the USB + * toggle bits + */ + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + toggle = USB_TD_TOGGLE_CARRY; + else { + toggle = USB_TD_TOGGLE_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 1); + } + + urb_priv->tds_cnt = 0; + urb_priv->ed = ed; + if (data_len > 0) + data = urb->transfer_buffer; + else + data = NULL; + + switch (ed->mode) { + case FHCI_TF_BULK: + if (urb->transfer_flags & URB_ZERO_PACKET && + urb->transfer_buffer_length > 0 && + ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) + urb_state = US_BULK0; + while (data_len > 4096) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : + toggle, + data, 4096, 0, 0, true); + data += 4096; + data_len -= 4096; + cnt++; + } + + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : toggle, + data, data_len, 0, 0, true); + cnt++; + + if (urb->transfer_flags & URB_ZERO_PACKET && + cnt < urb_priv->num_of_tds) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true); + cnt++; + } + break; + case FHCI_TF_INTR: + urb->start_frame = get_frame_num(fhci) + 1; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, data, data_len, + urb->interval, urb->start_frame, true); + break; + case FHCI_TF_CTRL: + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP, + USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true); + + if (data_len > 0) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA1, data, data_len, 0, 0, + true); + } + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT, + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + urb_state = US_CTRL_SETUP; + break; + case FHCI_TF_ISO: + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + u16 frame = urb->start_frame; + + /* + * FIXME scheduling should handle frame counter + * roll-around ... exotic case (and OHCI has + * a 2^16 iso range, vs other HCs max of 2^10) + */ + frame += cnt * urb->interval; + frame &= 0x07ff; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, + urb->interval, frame, true); + } + break; + default: + break; + } + + /* + * set the state of URB + * control pipe:3 states -- setup,data,status + * interrupt and bulk pipe:1 state -- data + */ + urb->pipe &= ~0x1f; + urb->pipe |= urb_state & 0x1f; + + urb_priv->state = URB_INPROGRESS; + + if (!ed->td_head) { + ed->state = FHCI_ED_OPER; + switch (ed->mode) { + case FHCI_TF_CTRL: + list_add(&ed->node, &fhci->hc_list->ctrl_list); + break; + case FHCI_TF_BULK: + list_add(&ed->node, &fhci->hc_list->bulk_list); + break; + case FHCI_TF_INTR: + list_add(&ed->node, &fhci->hc_list->intr_list); + break; + case FHCI_TF_ISO: + list_add(&ed->node, &fhci->hc_list->iso_list); + break; + default: + break; + } + } + + fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds); + fhci->active_urbs++; +} diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c new file mode 100644 index 000000000000..b40332290319 --- /dev/null +++ b/drivers/usb/host/fhci-tds.c @@ -0,0 +1,626 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +#define DUMMY_BD_BUFFER 0xdeadbeef +#define DUMMY2_BD_BUFFER 0xbaadf00d + +/* Transaction Descriptors bits */ +#define TD_R 0x8000 /* ready bit */ +#define TD_W 0x2000 /* wrap bit */ +#define TD_I 0x1000 /* interrupt on completion */ +#define TD_L 0x0800 /* last */ +#define TD_TC 0x0400 /* transmit CRC */ +#define TD_CNF 0x0200 /* CNF - Must be always 1 */ +#define TD_LSP 0x0100 /* Low-speed transaction */ +#define TD_PID 0x00c0 /* packet id */ +#define TD_RXER 0x0020 /* Rx error or not */ + +#define TD_NAK 0x0010 /* No ack. */ +#define TD_STAL 0x0008 /* Stall recieved */ +#define TD_TO 0x0004 /* time out */ +#define TD_UN 0x0002 /* underrun */ +#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */ +#define TD_AB 0x0008 /* Frame Aborted */ +#define TD_CR 0x0004 /* CRC Error */ +#define TD_OV 0x0002 /* Overrun */ +#define TD_BOV 0x0001 /* Buffer Overrun */ + +#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \ + TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV) + +#define TD_PID_DATA0 0x0080 /* Data 0 toggle */ +#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */ +#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */ + +#define TD_TOK_SETUP 0x0000 +#define TD_TOK_OUT 0x4000 +#define TD_TOK_IN 0x8000 +#define TD_ISO 0x1000 +#define TD_ENDP 0x0780 +#define TD_ADDR 0x007f + +#define TD_ENDP_SHIFT 7 + +struct usb_td { + __be16 status; + __be16 length; + __be32 buf_ptr; + __be16 extra; + __be16 reserved; +}; + +static struct usb_td __iomem *next_bd(struct usb_td __iomem *base, + struct usb_td __iomem *td, + u16 status) +{ + if (status & TD_W) + return base; + else + return ++td; +} + +void fhci_push_dummy_bd(struct endpoint *ep) +{ + if (ep->already_pushed_dummy_bd == false) { + u16 td_status = in_be16(&ep->empty_td->status); + + out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER); + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + ep->already_pushed_dummy_bd = true; + } +} + +/* destroy an USB endpoint */ +void fhci_ep0_free(struct fhci_usb *usb) +{ + struct endpoint *ep; + int size; + + ep = usb->ep0; + if (ep) { + if (ep->td_base) + cpm_muram_free(cpm_muram_offset(ep->td_base)); + + if (ep->conf_frame_Q) { + size = cq_howmany(ep->conf_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->conf_frame_Q); + + kfree(pkt); + } + cq_delete(ep->conf_frame_Q); + } + + if (ep->empty_frame_Q) { + size = cq_howmany(ep->empty_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->empty_frame_Q); + + kfree(pkt); + } + cq_delete(ep->empty_frame_Q); + } + + if (ep->dummy_packets_Q) { + size = cq_howmany(ep->dummy_packets_Q); + for (; size; size--) { + u8 *buff = cq_get(ep->dummy_packets_Q); + + kfree(buff); + } + cq_delete(ep->dummy_packets_Q); + } + + kfree(ep); + usb->ep0 = NULL; + } +} + +/* + * create the endpoint structure + * + * arguments: + * usb A pointer to the data structure of the USB + * data_mem The data memory partition(BUS) + * ring_len TD ring length + */ +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + struct endpoint *ep; + struct usb_td __iomem *td; + unsigned long ep_offset; + char *err_for = "enpoint PRAM"; + int ep_mem_size; + u32 i; + + /* we need at least 3 TDs in the ring */ + if (!(ring_len > 2)) { + fhci_err(usb->fhci, "illegal TD ring length parameters\n"); + return -EINVAL; + } + + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram); + ep_offset = cpm_muram_alloc(ep_mem_size, 32); + if (IS_ERR_VALUE(ep_offset)) + goto err; + ep->td_base = cpm_muram_addr(ep_offset); + + /* zero all queue pointers */ + ep->conf_frame_Q = cq_new(ring_len + 2); + ep->empty_frame_Q = cq_new(ring_len + 2); + ep->dummy_packets_Q = cq_new(ring_len + 2); + if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + err_for = "frame_queues"; + goto err; + } + + for (i = 0; i < (ring_len + 1); i++) { + struct packet *pkt; + u8 *buff; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) { + err_for = "frame"; + goto err; + } + + buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL); + if (!buff) { + kfree(pkt); + err_for = "buffer"; + goto err; + } + cq_put(ep->empty_frame_Q, pkt); + cq_put(ep->dummy_packets_Q, buff); + } + + /* we put the endpoint parameter RAM right behind the TD ring */ + ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len; + + ep->conf_td = ep->td_base; + ep->empty_td = ep->td_base; + + ep->already_pushed_dummy_bd = false; + + /* initialize tds */ + td = ep->td_base; + for (i = 0; i < ring_len; i++) { + out_be32(&td->buf_ptr, 0); + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be16(&td->extra, 0); + td++; + } + td--; + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + + /* endpoint structure has been created */ + usb->ep0 = ep; + + return 0; +err: + fhci_ep0_free(usb); + kfree(ep); + fhci_err(usb->fhci, "no memory for the %s\n", err_for); + return -ENOMEM; +} + +/* + * initialize the endpoint register according to the given parameters + * + * artuments: + * usb A pointer to the data strucutre of the USB + * ep A pointer to the endpoint structre + * data_mem The data memory partition(BUS) + */ +void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, + enum fhci_mem_alloc data_mem) +{ + u8 rt; + + /* set the endpoint registers according to the endpoint */ + out_be16(&usb->fhci->regs->usb_ep[0], + USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE); + out_be16(&usb->fhci->pram->ep_ptr[0], + cpm_muram_offset(ep->ep_pram_ptr)); + + rt = (BUS_MODE_BO_BE | BUS_MODE_GBL); +#ifdef MULTI_DATA_BUS + if (data_mem == MEM_SECONDARY) + rt |= BUS_MODE_DTB; +#endif + out_8(&ep->ep_pram_ptr->rx_func_code, rt); + out_8(&ep->ep_pram_ptr->tx_func_code, rt); + out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028); + out_be16(&ep->ep_pram_ptr->rx_base, 0); + out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base)); + out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); +} + +/* + * Collect the submitted frames and inform the application about them + * It is also prepearing the TDs for new frames. If the Tx interrupts + * are diabled, the application should call that routine to get + * confirmation about the submitted frames. Otherwise, the routine is + * called frome the interrupt service routine during the Tx interrupt. + * In that case the application is informed by calling the application + * specific 'fhci_transaction_confirm' routine + */ +static void fhci_td_transaction_confirm(struct fhci_usb *usb) +{ + struct endpoint *ep = usb->ep0; + struct packet *pkt; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + u16 td_length; + u32 buf; + + /* + * collect transmitted BDs from the chip. The routine clears all BDs + * with R bit = 0 and the pointer to data buffer is not NULL, that is + * BDs which point to the transmitted data buffer + */ + while (1) { + td = ep->conf_td; + td_status = in_be16(&td->status); + td_length = in_be16(&td->length); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* check if the TD is empty */ + if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf))) + break; + /* check if it is a dummy buffer */ + else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W)) + break; + + /* mark TD as empty */ + clrbits16(&td->status, ~TD_W); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + /* advance the TD pointer */ + ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status); + + /* check if it is a dummy buffer(type2) */ + if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) + continue; + + pkt = cq_get(ep->conf_frame_Q); + if (!pkt) + fhci_err(usb->fhci, "no frame to confirm\n"); + + if (td_status & TD_ERRORS) { + if (td_status & TD_RXER) { + if (td_status & TD_CR) + pkt->status = USB_TD_RX_ER_CRC; + else if (td_status & TD_AB) + pkt->status = USB_TD_RX_ER_BITSTUFF; + else if (td_status & TD_OV) + pkt->status = USB_TD_RX_ER_OVERUN; + else if (td_status & TD_BOV) + pkt->status = USB_TD_RX_DATA_OVERUN; + else if (td_status & TD_NO) + pkt->status = USB_TD_RX_ER_NONOCT; + else + fhci_err(usb->fhci, "illegal error " + "occured\n"); + } else if (td_status & TD_NAK) + pkt->status = USB_TD_TX_ER_NAK; + else if (td_status & TD_TO) + pkt->status = USB_TD_TX_ER_TIMEOUT; + else if (td_status & TD_UN) + pkt->status = USB_TD_TX_ER_UNDERUN; + else if (td_status & TD_STAL) + pkt->status = USB_TD_TX_ER_STALL; + else + fhci_err(usb->fhci, "illegal error occured\n"); + } else if ((extra_data & TD_TOK_IN) && + pkt->len > td_length - CRC_SIZE) { + pkt->status = USB_TD_RX_DATA_UNDERUN; + } + + if (extra_data & TD_TOK_IN) + pkt->len = td_length - CRC_SIZE; + else if (pkt->info & PKT_ZLP) + pkt->len = 0; + else + pkt->len = td_length; + + fhci_transaction_confirm(usb, pkt); + } +} + +/* + * Submitting a data frame to a specified endpoint of a USB device + * The frame is put in the driver's transmit queue for this endpoint + * + * Arguments: + * usb A pointer to the USB structure + * pkt A pointer to the user frame structure + * trans_type Transaction tyep - IN,OUT or SETUP + * dest_addr Device address - 0~127 + * dest_ep Endpoint number of the device - 0~16 + * trans_mode Pipe type - ISO,Interrupt,bulk or control + * dest_speed USB speed - Low speed or FULL speed + * data_toggle Data sequence toggle - 0 or 1 + */ +u32 fhci_host_transaction(struct fhci_usb *usb, + struct packet *pkt, + enum fhci_ta_type trans_type, + u8 dest_addr, + u8 dest_ep, + enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle) +{ + struct endpoint *ep = usb->ep0; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + + fhci_usb_disable_interrupt(usb); + /* start from the next BD that should be filled */ + td = ep->empty_td; + td_status = in_be16(&td->status); + + if (td_status & TD_R && in_be16(&td->length)) { + /* if the TD is not free */ + fhci_usb_enable_interrupt(usb); + return -1; + } + + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + fhci_usb_enable_interrupt(usb); + pkt->priv_data = td; + out_be32(&td->buf_ptr, virt_to_phys(pkt->data)); + /* sets up transaction parameters - addr,endp,dir,and type */ + extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr; + switch (trans_type) { + case FHCI_TA_IN: + extra_data |= TD_TOK_IN; + break; + case FHCI_TA_OUT: + extra_data |= TD_TOK_OUT; + break; + case FHCI_TA_SETUP: + extra_data |= TD_TOK_SETUP; + break; + } + if (trans_mode == FHCI_TF_ISO) + extra_data |= TD_ISO; + out_be16(&td->extra, extra_data); + + /* sets up the buffer descriptor */ + td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF); + if (!(pkt->info & PKT_NO_CRC)) + td_status |= TD_TC; + + switch (trans_type) { + case FHCI_TA_IN: + if (data_toggle) + pkt->info |= PKT_PID_DATA1; + else + pkt->info |= PKT_PID_DATA0; + break; + default: + if (data_toggle) { + td_status |= TD_PID_DATA1; + pkt->info |= PKT_PID_DATA1; + } else { + td_status |= TD_PID_DATA0; + pkt->info |= PKT_PID_DATA0; + } + break; + } + + if ((dest_speed == FHCI_LOW_SPEED) && + (usb->port_status == FHCI_PORT_FULL)) + td_status |= TD_LSP; + + out_be16(&td->status, td_status); + + /* set up buffer length */ + if (trans_type == FHCI_TA_IN) + out_be16(&td->length, pkt->len + CRC_SIZE); + else + out_be16(&td->length, pkt->len); + + /* put the frame to the confirmation queue */ + cq_put(ep->conf_frame_Q, pkt); + + if (cq_howmany(ep->conf_frame_Q) == 1) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + return 0; +} + +/* Reset the Tx BD ring */ +void fhci_flush_bds(struct fhci_usb *usb) +{ + u16 extra_data; + u16 td_status; + u32 buf; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + td = ep->td_base; + while (1) { + td_status = in_be16(&td->status); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* if the TD is not empty - we'll confirm it as Timeout */ + if (td_status & TD_R) + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + /* if this TD is dummy - let's skip this TD */ + else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) + out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER); + /* if this is the last TD - break */ + if (td_status & TD_W) + break; + + td++; + } + + fhci_td_transaction_confirm(usb); + + td = ep->td_base; + do { + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + td++; + } while (!(in_be16(&td->status) & TD_W)); + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; +} + +/* + * Flush all transmitted packets from TDs in the actual frame. + * This routine is called when something wrong with the controller and + * we want to get rid of the actual frame and start again next frame + */ +void fhci_flush_actual_frame(struct fhci_usb *usb) +{ + u8 mode; + u16 tb_ptr; + u16 extra_data; + u16 td_status; + u32 buf_ptr; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + /* disable the USB controller */ + mode = in_8(&usb->fhci->regs->usb_mod); + out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN); + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + do { + if (td_status & TD_R) { + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + } else { + out_be32(&td->buf_ptr, 0); + ep->already_pushed_dummy_bd = false; + break; + } + + /* advance the TD pointer */ + td = next_bd(ep->td_base, td, td_status); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + } while ((td_status & TD_R) || buf_ptr); + + fhci_td_transaction_confirm(usb); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; + + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* handles Tx confirm and Tx error interrupt */ +void fhci_tx_conf_interrupt(struct fhci_usb *usb) +{ + fhci_td_transaction_confirm(usb); + + /* + * Schedule another transaction to this frame only if we have + * already confirmed all transaction in the frame. + */ + if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) || + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) && + (list_empty(&usb->actual_frame->tds_list))) + fhci_schedule_transactions(usb); +} + +void fhci_host_transmit_actual_frame(struct fhci_usb *usb) +{ + u16 tb_ptr; + u16 td_status; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + + if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) { + struct usb_td __iomem *old_td = td; + + ep->already_pushed_dummy_bd = false; + td_status = in_be16(&td->status); + /* gets the next TD in the ring */ + td = next_bd(ep->td_base, td, td_status); + tb_ptr = cpm_muram_offset(td); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr); + + /* start transmit only if we have something in the TDs */ + if (in_be16(&td->status) & TD_R) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) { + out_be32(&old_td->buf_ptr, 0); + ep->conf_td = next_bd(ep->td_base, ep->conf_td, + td_status); + } else { + out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER); + } + } +} diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h new file mode 100644 index 000000000000..7116284ed21a --- /dev/null +++ b/drivers/usb/host/fhci.h @@ -0,0 +1,607 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __FHCI_H +#define __FHCI_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" + +#define USB_CLOCK 48000000 + +#define FHCI_PRAM_SIZE 0x100 + +#define MAX_EDS 32 +#define MAX_TDS 32 + + +/* CRC16 field size */ +#define CRC_SIZE 2 + +/* USB protocol overhead for each frame transmitted from the host */ +#define PROTOCOL_OVERHEAD 7 + +/* Packet structure, info field */ +#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */ +#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */ +#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */ +#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */ +#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */ +#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */ +#define PKT_HOST_DATA 0x02000000 /* Data packet */ +#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */ +#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */ +#define PKT_ZLP 0x00400000 /* Zero length packet */ +#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */ +#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */ +#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */ +#define PKT_STALL_FRAME 0x00040000 /* STALL packet */ +#define PKT_NACK_FRAME 0x00020000 /* NACK packet */ +#define PKT_NO_PID 0x00010000 /* No PID */ +#define PKT_NO_CRC 0x00008000 /* don't append CRC */ +#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */ +#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */ +#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */ + +#define TRANS_OK (0) +#define TRANS_INPROGRESS (-1) +#define TRANS_DISCARD (-2) +#define TRANS_FAIL (-3) + +#define PS_INT 0 +#define PS_DISCONNECTED 1 +#define PS_CONNECTED 2 +#define PS_READY 3 +#define PS_MISSING 4 + +/* Transfer Descriptor status field */ +#define USB_TD_OK 0x00000000 /* TD transmited or received ok */ +#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */ +#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */ +#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */ +#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */ +#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */ +#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */ +#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */ +#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */ +#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */ +#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */ +#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */ +#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */ + +#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \ + USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \ + USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \ + USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \ + USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN) + +/* Transfer Descriptor toggle field */ +#define USB_TD_TOGGLE_DATA0 0 +#define USB_TD_TOGGLE_DATA1 1 +#define USB_TD_TOGGLE_CARRY 2 + +/* #define MULTI_DATA_BUS */ + +/* Bus mode register RBMR/TBMR */ +#define BUS_MODE_GBL 0x20 /* Global snooping */ +#define BUS_MODE_BO 0x18 /* Byte ordering */ +#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */ +#define BUS_MODE_DTB 0x02 /* Data bus */ + +/* FHCI QE USB Register Description */ + +/* USB Mode Register bit define */ +#define USB_MODE_EN 0x01 +#define USB_MODE_HOST 0x02 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SFTE 0x08 +#define USB_MODE_RESUME 0x40 +#define USB_MODE_LSS 0x80 + +/* USB Slave Address Register Mask */ +#define USB_SLVADDR_MASK 0x7F + +/* USB Endpoint register define */ +#define USB_EPNUM_MASK 0xF000 +#define USB_EPNUM_SHIFT 12 + +#define USB_TRANS_MODE_SHIFT 8 +#define USB_TRANS_CTR 0x0000 +#define USB_TRANS_INT 0x0100 +#define USB_TRANS_BULK 0x0200 +#define USB_TRANS_ISO 0x0300 + +#define USB_EP_MF 0x0020 +#define USB_EP_RTE 0x0010 + +#define USB_THS_SHIFT 2 +#define USB_THS_MASK 0x000c +#define USB_THS_NORMAL 0x0 +#define USB_THS_IGNORE_IN 0x0004 +#define USB_THS_NACK 0x0008 +#define USB_THS_STALL 0x000c + +#define USB_RHS_SHIFT 0 +#define USB_RHS_MASK 0x0003 +#define USB_RHS_NORMAL 0x0 +#define USB_RHS_IGNORE_OUT 0x0001 +#define USB_RHS_NACK 0x0002 +#define USB_RHS_STALL 0x0003 + +#define USB_RTHS_MASK 0x000f + +/* USB Command Register define */ +#define USB_CMD_STR_FIFO 0x80 +#define USB_CMD_FLUSH_FIFO 0x40 +#define USB_CMD_ISFT 0x20 +#define USB_CMD_DSFT 0x10 +#define USB_CMD_EP_MASK 0x03 + +/* USB Event and Mask Register define */ +#define USB_E_MSF_MASK 0x0800 +#define USB_E_SFT_MASK 0x0400 +#define USB_E_RESET_MASK 0x0200 +#define USB_E_IDLE_MASK 0x0100 +#define USB_E_TXE4_MASK 0x0080 +#define USB_E_TXE3_MASK 0x0040 +#define USB_E_TXE2_MASK 0x0020 +#define USB_E_TXE1_MASK 0x0010 +#define USB_E_SOF_MASK 0x0008 +#define USB_E_BSY_MASK 0x0004 +#define USB_E_TXB_MASK 0x0002 +#define USB_E_RXB_MASK 0x0001 + +/* Freescale USB Host controller registers */ +struct fhci_regs { + u8 usb_mod; /* mode register */ + u8 usb_addr; /* address register */ + u8 usb_comm; /* command register */ + u8 reserved1[1]; + __be16 usb_ep[4]; /* endpoint register */ + u8 reserved2[4]; + __be16 usb_event; /* event register */ + u8 reserved3[2]; + __be16 usb_mask; /* mask register */ + u8 reserved4[1]; + u8 usb_status; /* status register */ + __be16 usb_sof_tmr; /* Start Of Frame timer */ + u8 reserved5[2]; + __be16 usb_frame_num; /* frame number register */ + u8 reserved6[1]; +}; + +/* Freescale USB HOST */ +struct fhci_pram { + __be16 ep_ptr[4]; /* Endpoint porter reg */ + __be32 rx_state; /* Rx internal state */ + __be32 rx_ptr; /* Rx internal data pointer */ + __be16 frame_num; /* Frame number */ + __be16 rx_cnt; /* Rx byte count */ + __be32 rx_temp; /* Rx temp */ + __be32 rx_data_temp; /* Rx data temp */ + __be16 rx_u_ptr; /* Rx microcode return address temp */ + u8 reserved1[2]; /* reserved area */ + __be32 sof_tbl; /* SOF lookup table pointer */ + u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */ + u8 reserved2[0xdb]; +}; + +/* Freescale USB Endpoint*/ +struct fhci_ep_pram { + __be16 rx_base; /* Rx BD base address */ + __be16 tx_base; /* Tx BD base address */ + u8 rx_func_code; /* Rx function code */ + u8 tx_func_code; /* Tx function code */ + __be16 rx_buff_len; /* Rx buffer length */ + __be16 rx_bd_ptr; /* Rx BD pointer */ + __be16 tx_bd_ptr; /* Tx BD pointer */ + __be32 tx_state; /* Tx internal state */ + __be32 tx_ptr; /* Tx internal data pointer */ + __be16 tx_crc; /* temp transmit CRC */ + __be16 tx_cnt; /* Tx byte count */ + __be32 tx_temp; /* Tx temp */ + __be16 tx_u_ptr; /* Tx microcode return address temp */ + __be16 reserved; +}; + +struct fhci_controller_list { + struct list_head ctrl_list; /* control endpoints */ + struct list_head bulk_list; /* bulk endpoints */ + struct list_head iso_list; /* isochronous endpoints */ + struct list_head intr_list; /* interruput endpoints */ + struct list_head done_list; /* done transfers */ +}; + +struct virtual_root_hub { + int dev_num; /* USB address of the root hub */ + u32 feature; /* indicates what feature has been set */ + struct usb_hub_status hub; + struct usb_port_status port; +}; + +enum fhci_gpios { + GPIO_USBOE = 0, + GPIO_USBTP, + GPIO_USBTN, + GPIO_USBRP, + GPIO_USBRN, + /* these are optional */ + GPIO_SPEED, + GPIO_POWER, + NUM_GPIOS, +}; + +enum fhci_pins { + PIN_USBOE = 0, + PIN_USBTP, + PIN_USBTN, + NUM_PINS, +}; + +struct fhci_hcd { + enum qe_clock fullspeed_clk; + enum qe_clock lowspeed_clk; + struct qe_pin *pins[NUM_PINS]; + int gpios[NUM_GPIOS]; + bool alow_gpios[NUM_GPIOS]; + + struct fhci_regs __iomem *regs; /* I/O memory used to communicate */ + struct fhci_pram __iomem *pram; /* Parameter RAM */ + struct gtm_timer *timer; + + spinlock_t lock; + struct fhci_usb *usb_lld; /* Low-level driver */ + struct virtual_root_hub *vroot_hub; /* the virtual root hub */ + int active_urbs; + struct fhci_controller_list *hc_list; + struct tasklet_struct *process_done_task; /* tasklet for done list */ + + struct list_head empty_eds; + struct list_head empty_tds; + +#ifdef CONFIG_FHCI_DEBUG + int usb_irq_stat[13]; + struct dentry *dfs_root; + struct dentry *dfs_regs; + struct dentry *dfs_irq_stat; +#endif +}; + +#define USB_FRAME_USAGE 90 +#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */ +#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */ +#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15) +#define MAX_PERIODIC_FRAME_USAGE 90 + +/* transaction type */ +enum fhci_ta_type { + FHCI_TA_IN = 0, /* input transaction */ + FHCI_TA_OUT, /* output transaction */ + FHCI_TA_SETUP, /* setup transaction */ +}; + +/* transfer mode */ +enum fhci_tf_mode { + FHCI_TF_CTRL = 0, + FHCI_TF_ISO, + FHCI_TF_BULK, + FHCI_TF_INTR, +}; + +enum fhci_speed { + FHCI_FULL_SPEED, + FHCI_LOW_SPEED, +}; + +/* endpoint state */ +enum fhci_ed_state { + FHCI_ED_NEW = 0, /* pipe is new */ + FHCI_ED_OPER, /* pipe is operating */ + FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */ + FHCI_ED_SKIP, /* skip this pipe */ + FHCI_ED_HALTED, /* pipe is halted */ +}; + +enum fhci_port_status { + FHCI_PORT_POWER_OFF = 0, + FHCI_PORT_DISABLED, + FHCI_PORT_DISCONNECTING, + FHCI_PORT_WAITING, /* waiting for connection */ + FHCI_PORT_FULL, /* full speed connected */ + FHCI_PORT_LOW, /* low speed connected */ +}; + +enum fhci_mem_alloc { + MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */ + MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */ + MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */ + MEM_PRAM = 0x00000008, /* multi-user RAM identifier */ +}; + +/* USB default parameters*/ +#define DEFAULT_RING_LEN 8 +#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS + +struct ed { + u8 dev_addr; /* device address */ + u8 ep_addr; /* endpoint address */ + enum fhci_tf_mode mode; /* USB transfer mode */ + enum fhci_speed speed; + unsigned int max_pkt_size; + enum fhci_ed_state state; + struct list_head td_list; /* a list of all queued TD to this pipe */ + struct list_head node; + + /* read only parameters, should be cleared upon initialization */ + u8 toggle_carry; /* toggle carry from the last TD submitted */ + u32 last_iso; /* time stamp of last queued ISO transfer */ + struct td *td_head; /* a pointer to the current TD handled */ +}; + +struct td { + void *data; /* a pointer to the data buffer */ + unsigned int len; /* length of the data to be submitted */ + unsigned int actual_len; /* actual bytes transfered on this td */ + enum fhci_ta_type type; /* transaction type */ + u8 toggle; /* toggle for next trans. within this TD */ + u16 iso_index; /* ISO transaction index */ + u16 start_frame; /* start frame time stamp */ + u16 interval; /* interval between trans. (for ISO/Intr) */ + u32 status; /* status of the TD */ + struct ed *ed; /* a handle to the corresponding ED */ + struct urb *urb; /* a handle to the corresponding URB */ + bool ioc; /* Inform On Completion */ + struct list_head node; + + /* read only parameters should be cleared upon initialization */ + struct packet *pkt; + int nak_cnt; + int error_cnt; + struct list_head frame_lh; +}; + +struct packet { + u8 *data; /* packet data */ + u32 len; /* packet length */ + u32 status; /* status of the packet - equivalent to the status + * field for the corresponding structure td */ + u32 info; /* packet information */ + void __iomem *priv_data; /* private data of the driver (TDs or BDs) */ +}; + +/* struct for each URB */ +#define URB_INPROGRESS 0 +#define URB_DEL 1 + +/* URB states (state field) */ +#define US_BULK 0 +#define US_BULK0 1 + +/* three setup states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +#define EP_ZERO 0 + +struct urb_priv { + int num_of_tds; + int tds_cnt; + int state; + + struct td **tds; + struct ed *ed; + struct timer_list time_out; +}; + +struct endpoint { + /* Pointer to ep parameter RAM */ + struct fhci_ep_pram __iomem *ep_pram_ptr; + + /* Host transactions */ + struct usb_td __iomem *td_base; /* first TD in the ring */ + struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ + struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ + struct kfifo *empty_frame_Q; /* Empty frames list to use */ + struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + + bool already_pushed_dummy_bd; +}; + +/* struct for each 1mSec frame time */ +#define FRAME_IS_TRANSMITTED 0x00 +#define FRAME_TIMER_END_TRANSMISSION 0x01 +#define FRAME_DATA_END_TRANSMISSION 0x02 +#define FRAME_END_TRANSMISSION 0x03 +#define FRAME_IS_PREPARED 0x04 + +struct fhci_time_frame { + u16 frame_num; /* frame number */ + u16 total_bytes; /* total bytes submitted within this frame */ + u8 frame_status; /* flag that indicates to stop fill this frame */ + struct list_head tds_list; /* all tds of this frame */ +}; + +/* internal driver structure*/ +struct fhci_usb { + u16 saved_msk; /* saving of the USB mask register */ + struct endpoint *ep0; /* pointer for endpoint0 structure */ + int intr_nesting_cnt; /* interrupt nesting counter */ + u16 max_frame_usage; /* max frame time usage,in micro-sec */ + u16 max_bytes_per_frame; /* max byte can be tx in one time frame */ + u32 sw_transaction_time; /* sw complete trans time,in micro-sec */ + struct fhci_time_frame *actual_frame; + struct fhci_controller_list *hc_list; /* main structure for hc */ + struct virtual_root_hub *vroot_hub; + enum fhci_port_status port_status; /* v_rh port status */ + + u32 (*transfer_confirm)(struct fhci_hcd *fhci); + + struct fhci_hcd *fhci; +}; + +/* + * Various helpers and prototypes below. + */ + +static inline u16 get_frame_num(struct fhci_hcd *fhci) +{ + return in_be16(&fhci->pram->frame_num) & 0x07ff; +} + +#define fhci_dbg(fhci, fmt, args...) \ + dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_vdbg(fhci, fmt, args...) \ + dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_err(fhci, fmt, args...) \ + dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_info(fhci, fmt, args...) \ + dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_warn(fhci, fmt, args...) \ + dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args) + +static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd) +{ + return (struct fhci_hcd *)hcd->hcd_priv; +} + +static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) +{ + return container_of((void *)fhci, struct usb_hcd, hcd_priv); +} + +/* fifo of pointers */ +static inline struct kfifo *cq_new(int size) +{ + return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); +} + +static inline void cq_delete(struct kfifo *kfifo) +{ + kfifo_free(kfifo); +} + +static inline unsigned int cq_howmany(struct kfifo *kfifo) +{ + return __kfifo_len(kfifo) / sizeof(void *); +} + +static inline int cq_put(struct kfifo *kfifo, void *p) +{ + return __kfifo_put(kfifo, (void *)&p, sizeof(p)); +} + +static inline void *cq_get(struct kfifo *kfifo) +{ + void *p = NULL; + + __kfifo_get(kfifo, (void *)&p, sizeof(p)); + return p; +} + +/* fhci-hcd.c */ +void fhci_start_sof_timer(struct fhci_hcd *fhci); +void fhci_stop_sof_timer(struct fhci_hcd *fhci); +u16 fhci_get_sof_timer_count(struct fhci_usb *usb); +void fhci_usb_enable_interrupt(struct fhci_usb *usb); +void fhci_usb_disable_interrupt(struct fhci_usb *usb); +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci); + +/* fhci-mem.c */ +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td); +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed); +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci); +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc); +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number); + +/* fhci-hub.c */ +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status); +void fhci_port_disable(struct fhci_hcd *fhci); +void fhci_port_enable(void *lld); +void fhci_io_port_generate_reset(struct fhci_hcd *fhci); +void fhci_port_reset(void *lld); +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf); +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + +/* fhci-tds.c */ +void fhci_flush_bds(struct fhci_usb *usb); +void fhci_flush_actual_frame(struct fhci_usb *usb); +u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt, + enum fhci_ta_type trans_type, u8 dest_addr, + u8 dest_ep, enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle); +void fhci_host_transmit_actual_frame(struct fhci_usb *usb); +void fhci_tx_conf_interrupt(struct fhci_usb *usb); +void fhci_push_dummy_bd(struct endpoint *ep); +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len); +void fhci_init_ep_registers(struct fhci_usb *usb, + struct endpoint *ep, + enum fhci_mem_alloc data_mem); +void fhci_ep0_free(struct fhci_usb *usb); + +/* fhci-sched.c */ +extern struct tasklet_struct fhci_tasklet; +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt); +void fhci_flush_all_transmissions(struct fhci_usb *usb); +void fhci_schedule_transactions(struct fhci_usb *usb); +void fhci_device_connected_interrupt(struct fhci_hcd *fhci); +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci); +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb); +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci); +irqreturn_t fhci_irq(struct usb_hcd *hcd); +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd); + +/* fhci-q.h */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb); +struct td *fhci_remove_td_from_ed(struct ed *ed); +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame); +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed); +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame); +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td); +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list); +void fhci_done_td(struct urb *urb, struct td *td); +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed); + +#ifdef CONFIG_FHCI_DEBUG + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er); +void fhci_dfs_destroy(struct fhci_hcd *fhci); +void fhci_dfs_create(struct fhci_hcd *fhci); + +#else + +static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {} +static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {} +static inline void fhci_dfs_create(struct fhci_hcd *fhci) {} + +#endif /* CONFIG_FHCI_DEBUG */ + +#endif /* __FHCI_H */ -- cgit v1.2.3 From 4712fff9be0f4a41f7add146cee88a9b945215d7 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 21 Jan 2009 13:16:28 +0000 Subject: powerpc: More printing warning fixes for the l64 to ll64 conversion These are all powerpc specific drivers. res.start in fsl_elbc_nand.c needs to be cast since it may be either 32 or 64 bit. Thanks to Scott Wood for noticing. Signed-off-by: Stephen Rothwell Acked-by: Arnd Bergmann call_edac bits in particular Acked-by: Olof Johansson pasemi_nand peices Acked-by: Scott Wood fsl_elbc fixes Signed-off-by: Benjamin Herrenschmidt --- drivers/edac/cell_edac.c | 8 ++++---- drivers/mtd/nand/fsl_elbc_nand.c | 8 ++++---- drivers/mtd/nand/pasemi_nand.c | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index cd2e3b8087e7..24f3ca851523 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset, syndrome; - dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset; - dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); - dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); + dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg); chanmask = 0; if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP) chanmask |= 0x1; @@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) "Yuck ! No channel populated ? Aborting !\n"); return -ENODEV; } - dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n", + dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n", in_be64(®s->mic_fir)); /* Allocate & init EDAC MC data structure */ diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 65929db29446..1f6eb2578717 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); - dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n", + dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n", chip->chipsize); dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n", chip->pagemask); @@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", chip->ecc.layout); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); - dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size); + dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n", mtd->erasesize); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n", @@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, #endif add_mtd_device(&priv->mtd); - printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n", - res.start, priv->bank); + printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", + (unsigned long long)res.start, priv->bank); return 0; err: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 9bd6c9ac8443..a8b9376cf324 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end); + pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end); /* Allocate memory for MTD device structure and private data */ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) + @@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, goto out_lpc; } - printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n", + printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n", res.start, lpcctl); return 0; -- cgit v1.2.3 From 30b23634084d95781f7611c0713cb551a0c0a152 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 27 Jan 2009 21:19:41 -0800 Subject: drm: Rip out the racy, unused vblank signal code. Schedule a vblank signal, kill the process, and we'll go walking over freed memory. Given that no open-source userland exists using this, nor have I ever heard of a consumer, just let this code die. Signed-off-by: Eric Anholt Requested-by: Linus Torvalds Acked-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_irq.c | 161 +++++++--------------------------------------- include/drm/drm.h | 2 +- include/drm/drmP.h | 9 --- 3 files changed, 24 insertions(+), 148 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 477caa1b1e4b..69aa0ab28403 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -106,8 +106,6 @@ void drm_vblank_cleanup(struct drm_device *dev) drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, - DRM_MEM_DRIVER); drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * dev->num_crtcs, DRM_MEM_DRIVER); drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * @@ -132,7 +130,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) setup_timer(&dev->vblank_disable_timer, vblank_disable_fn, (unsigned long)dev); spin_lock_init(&dev->vbl_lock); - atomic_set(&dev->vbl_signal_pending, 0); dev->num_crtcs = num_crtcs; dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs, @@ -140,11 +137,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) if (!dev->vbl_queue) goto err; - dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs, - DRM_MEM_DRIVER); - if (!dev->vbl_sigs) - goto err; - dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs, DRM_MEM_DRIVER); if (!dev->_vblank_count) @@ -177,7 +169,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) /* Zero per-crtc vblank stuff */ for (i = 0; i < num_crtcs; i++) { init_waitqueue_head(&dev->vbl_queue[i]); - INIT_LIST_HEAD(&dev->vbl_sigs[i]); atomic_set(&dev->_vblank_count[i], 0); atomic_set(&dev->vblank_refcount[i], 0); } @@ -540,15 +531,10 @@ out: * \param data user argument, pointing to a drm_wait_vblank structure. * \return zero on success or a negative number on failure. * - * Verifies the IRQ is installed. - * - * If a signal is requested checks if this task has already scheduled the same signal - * for the same vblank sequence number - nothing to be done in - * that case. If the number of tasks waiting for the interrupt exceeds 100 the - * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this - * task. - * - * If a signal is not requested, then calls vblank_wait(). + * This function enables the vblank interrupt on the pipe requested, then + * sleeps waiting for the requested sequence number to occur, and drops + * the vblank interrupt refcount afterwards. (vblank irq disable follows that + * after a timeout with no further vblank waits scheduled). */ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -560,6 +546,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data, if ((!dev->pdev->irq) || (!dev->irq_enabled)) return -EINVAL; + if (vblwait->request.type & _DRM_VBLANK_SIGNAL) + return -EINVAL; + if (vblwait->request.type & ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) { DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n", @@ -597,89 +586,26 @@ int drm_wait_vblank(struct drm_device *dev, void *data, vblwait->request.sequence = seq + 1; } - if (flags & _DRM_VBLANK_SIGNAL) { - unsigned long irqflags; - struct list_head *vbl_sigs = &dev->vbl_sigs[crtc]; - struct drm_vbl_sig *vbl_sig; - - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - /* Check if this task has already scheduled the same signal - * for the same vblank sequence number; nothing to be done in - * that case - */ - list_for_each_entry(vbl_sig, vbl_sigs, head) { - if (vbl_sig->sequence == vblwait->request.sequence - && vbl_sig->info.si_signo == - vblwait->request.signal - && vbl_sig->task == current) { - spin_unlock_irqrestore(&dev->vbl_lock, - irqflags); - vblwait->reply.sequence = seq; - goto done; - } - } - - if (atomic_read(&dev->vbl_signal_pending) >= 100) { - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - ret = -EBUSY; - goto done; - } - - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - - vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - if (!vbl_sig) { - ret = -ENOMEM; - goto done; - } - - /* Get a refcount on the vblank, which will be released by - * drm_vbl_send_signals(). - */ - ret = drm_vblank_get(dev, crtc); - if (ret) { - drm_free(vbl_sig, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - goto done; - } - - atomic_inc(&dev->vbl_signal_pending); - - vbl_sig->sequence = vblwait->request.sequence; - vbl_sig->info.si_signo = vblwait->request.signal; - vbl_sig->task = current; + DRM_DEBUG("waiting on vblank count %d, crtc %d\n", + vblwait->request.sequence, crtc); + dev->last_vblank_wait[crtc] = vblwait->request.sequence; + DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, + (((drm_vblank_count(dev, crtc) - + vblwait->request.sequence) <= (1 << 23)) || + !dev->irq_enabled)); - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - list_add_tail(&vbl_sig->head, vbl_sigs); + if (ret != -EINTR) { + struct timeval now; - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + do_gettimeofday(&now); - vblwait->reply.sequence = seq; + vblwait->reply.tval_sec = now.tv_sec; + vblwait->reply.tval_usec = now.tv_usec; + vblwait->reply.sequence = drm_vblank_count(dev, crtc); + DRM_DEBUG("returning %d to client\n", + vblwait->reply.sequence); } else { - DRM_DEBUG("waiting on vblank count %d, crtc %d\n", - vblwait->request.sequence, crtc); - dev->last_vblank_wait[crtc] = vblwait->request.sequence; - DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, - (((drm_vblank_count(dev, crtc) - - vblwait->request.sequence) <= (1 << 23)) || - !dev->irq_enabled)); - - if (ret != -EINTR) { - struct timeval now; - - do_gettimeofday(&now); - - vblwait->reply.tval_sec = now.tv_sec; - vblwait->reply.tval_usec = now.tv_usec; - vblwait->reply.sequence = drm_vblank_count(dev, crtc); - DRM_DEBUG("returning %d to client\n", - vblwait->reply.sequence); - } else { - DRM_DEBUG("vblank wait interrupted by signal\n"); - } + DRM_DEBUG("vblank wait interrupted by signal\n"); } done: @@ -687,46 +613,6 @@ done: return ret; } -/** - * Send the VBLANK signals. - * - * \param dev DRM device. - * \param crtc CRTC where the vblank event occurred - * - * Sends a signal for each task in drm_device::vbl_sigs and empties the list. - * - * If a signal is not requested, then calls vblank_wait(). - */ -static void drm_vbl_send_signals(struct drm_device *dev, int crtc) -{ - struct drm_vbl_sig *vbl_sig, *tmp; - struct list_head *vbl_sigs; - unsigned int vbl_seq; - unsigned long flags; - - spin_lock_irqsave(&dev->vbl_lock, flags); - - vbl_sigs = &dev->vbl_sigs[crtc]; - vbl_seq = drm_vblank_count(dev, crtc); - - list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { - if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) { - vbl_sig->info.si_code = vbl_seq; - send_sig_info(vbl_sig->info.si_signo, - &vbl_sig->info, vbl_sig->task); - - list_del(&vbl_sig->head); - - drm_free(vbl_sig, sizeof(*vbl_sig), - DRM_MEM_DRIVER); - atomic_dec(&dev->vbl_signal_pending); - drm_vblank_put(dev, crtc); - } - } - - spin_unlock_irqrestore(&dev->vbl_lock, flags); -} - /** * drm_handle_vblank - handle a vblank event * @dev: DRM device @@ -739,6 +625,5 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) { atomic_inc(&dev->_vblank_count[crtc]); DRM_WAKEUP(&dev->vbl_queue[crtc]); - drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); diff --git a/include/drm/drm.h b/include/drm/drm.h index 32e5096554e9..8e77357334ad 100644 --- a/include/drm/drm.h +++ b/include/drm/drm.h @@ -458,7 +458,7 @@ enum drm_vblank_seq_type { _DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */ _DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */ _DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */ - _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */ + _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking, unsupported */ }; #define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index afb7858c068d..8190b9bcc2d9 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -545,13 +545,6 @@ struct drm_ctx_list { struct drm_file *tag; /**< associated fd private data */ }; -struct drm_vbl_sig { - struct list_head head; - unsigned int sequence; - struct siginfo info; - struct task_struct *task; -}; - /* location of GART table */ #define DRM_ATI_GART_MAIN 1 #define DRM_ATI_GART_FB 2 @@ -903,8 +896,6 @@ struct drm_device { wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */ atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */ spinlock_t vbl_lock; - struct list_head *vbl_sigs; /**< signal list to send on VBLANK */ - atomic_t vbl_signal_pending; /* number of signals pending on all crtcs*/ atomic_t *vblank_refcount; /* number of users of vblank interruptsper crtc */ u32 *last_vblank; /* protected by dev->vbl_lock, used */ /* for wraparound handling */ -- cgit v1.2.3 From 82d4b90debaa7ab3590335c1b641eb3d2ebb164e Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 19 Jan 2009 19:19:55 +0100 Subject: ieee1394: support for speeds greater than S800 The hard-wired configuration of the top speed (until now S800) was unnecessary, remove it. If the local link layer controller supports S1600 or S3200, we now assume this speed for all present 1394b PHYs (except if they are behind 1394a repeaters) until nodemgr figured out the actual speed while fetching the config ROM. Signed-off-by: Stefan Richter --- drivers/ieee1394/ieee1394.h | 4 +--- drivers/ieee1394/ieee1394_core.c | 16 ++++++++-------- 2 files changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h index e0ae0d3d747f..af320e2c5079 100644 --- a/drivers/ieee1394/ieee1394.h +++ b/drivers/ieee1394/ieee1394.h @@ -54,9 +54,7 @@ #define IEEE1394_SPEED_800 0x03 #define IEEE1394_SPEED_1600 0x04 #define IEEE1394_SPEED_3200 0x05 - -/* The current highest tested speed supported by the subsystem */ -#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800 +#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200 /* Maps speed values above to a string representation */ extern const char *hpsb_speedto_str[]; diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index dcdb71a7718d..2beb8d94f7bd 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) u8 cldcnt[nodecount]; u8 *map = host->speed_map; u8 *speedcap = host->speed; + u8 local_link_speed = host->csr.lnk_spd; struct selfid *sid; struct ext_selfid *esid; int i, j, n; @@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++; speedcap[n] = sid->speed; - if (speedcap[n] > host->csr.lnk_spd) - speedcap[n] = host->csr.lnk_spd; + if (speedcap[n] > local_link_speed) + speedcap[n] = local_link_speed; n--; } } @@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) } } -#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX - /* assume maximum speed for 1394b PHYs, nodemgr will correct it */ - for (n = 0; n < nodecount; n++) - if (speedcap[n] == SELFID_SPEED_UNKNOWN) - speedcap[n] = IEEE1394_SPEED_MAX; -#endif + /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */ + if (local_link_speed > SELFID_SPEED_UNKNOWN) + for (i = 0; i < nodecount; i++) + if (speedcap[i] == SELFID_SPEED_UNKNOWN) + speedcap[i] = local_link_speed; } -- cgit v1.2.3 From 4106ceff15495a7df1617e78bbf3e852fe6601c9 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 19 Jan 2009 19:20:31 +0100 Subject: ieee1394: sbp2: update a help string Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ab1034ccb7fb..3f8082d31049 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -115,8 +115,8 @@ */ static int sbp2_max_speed = IEEE1394_SPEED_MAX; module_param_named(max_speed, sbp2_max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed " - "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)"); +MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, " + "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)"); /* * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs. -- cgit v1.2.3 From d3e3e970e3722c51e3fd3b042b6065d4bfaf6f81 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: ieee1394: sbp2: fix payload limit at S1600 and S3200 1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3). Our previously too large limit doesn't matter though if the controller reports its max_receive correctly. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 3f8082d31049..a2984a091aea 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *); static int sbp2_max_speed_and_size(struct sbp2_lu *); -static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; +static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa }; static DEFINE_RWLOCK(sbp2_hi_logical_units_lock); -- cgit v1.2.3 From c1fbdd78517a9323ea5f5767c8ceb10aabc40fc2 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: ieee1394: sbp2: don't assume zero model_id or firmware_revision if there is none This makes sbp2 behave more like firewire-sbp2 which reports 0xff000000 as immediate value if there are no unit directory entries for model_id or firmware_revision. It does not reduce matches with the currently existing quirks table; the only zero entry there is for a device which actually does have a zero model_id. It only changes how model_id and firmware_revision are logged if they are missing. Other functionally unrelated changes: The model_id member of quirks list entries is renamed to model; the value (but not the effect) of SBP2_ROM_VALUE_WILDCARD is changed. Now this part of the source is identical with firewire-sbp2 for easier maintenance. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index a2984a091aea..fb8f9f4430ad 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = { .sdev_attrs = sbp2_sysfs_sdev_attrs, }; -/* for match-all entries in sbp2_workarounds_table */ -#define SBP2_ROM_VALUE_WILDCARD 0x1000000 +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ /* * List of devices with known bugs. @@ -359,60 +359,60 @@ static struct scsi_host_template sbp2_shost_template = { */ static const struct { u32 firmware_revision; - u32 model_id; + u32 model; unsigned workarounds; } sbp2_workarounds_table[] = { /* DViCO Momobay CX-1 with TSB42AA9 bridge */ { .firmware_revision = 0x002800, - .model_id = 0x001010, + .model = 0x001010, .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8 | SBP2_WORKAROUND_POWER_CONDITION, }, /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { .firmware_revision = 0x002800, - .model_id = 0x000000, + .model = 0x000000, .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY | SBP2_WORKAROUND_POWER_CONDITION, }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, - .model_id = 0x000021, + .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000022, + .model = 0x000022, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000023, + .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod Photo */ { .firmware_revision = 0x0a2700, - .model_id = 0x00007e, + .model = 0x00007e, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1341,13 +1341,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, struct csr1212_keyval *kv; struct csr1212_dentry *dentry; u64 management_agent_addr; - u32 unit_characteristics, firmware_revision; + u32 unit_characteristics, firmware_revision, model; unsigned workarounds; int i; management_agent_addr = 0; unit_characteristics = 0; - firmware_revision = 0; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = ud->flags & UNIT_DIRECTORY_MODEL_ID ? + ud->model_id : SBP2_ROM_VALUE_MISSING; csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { switch (kv->key.id) { @@ -1388,9 +1390,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; - if (sbp2_workarounds_table[i].model_id != + if (sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD && - sbp2_workarounds_table[i].model_id != ud->model_id) + sbp2_workarounds_table[i].model != model) continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; @@ -1403,7 +1405,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), workarounds, firmware_revision, ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, - ud->model_id); + model); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ -- cgit v1.2.3 From a08e100aece16e33a45b82924ad85f4066c4ed1c Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: firewire: sbp2: fix payload limit at S1600 and S3200 1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3). Our previously too large limit doesn't matter though if the controller reports its max_receive correctly. Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e88d5067448c..ac8038431585 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -168,6 +168,7 @@ struct sbp2_target { int address_high; unsigned int workarounds; unsigned int mgt_orb_timeout; + unsigned int max_payload; int dont_block; /* counter for each logical unit */ int blocked; /* ditto */ @@ -1156,6 +1157,15 @@ static int sbp2_probe(struct device *dev) sbp2_init_workarounds(tgt, model, firmware_revision); + /* + * At S100 we can do 512 bytes per packet, at S200 1024 bytes, + * and so on up to 4096 bytes. The SBP-2 max_payload field + * specifies the max payload size as 2 ^ (max_payload + 2), so + * if we set this to max_speed + 7, we get the right value. + */ + tgt->max_payload = min(device->max_speed + 7, 10U); + tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1); + /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); @@ -1434,7 +1444,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned int max_payload; int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1462,17 +1471,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->done = done; orb->cmd = cmd; - orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); - /* - * At speed 100 we can do 512 bytes per packet, at speed 200, - * 1024 bytes per packet etc. The SBP-2 max_payload field - * specifies the max payload size as 2 ^ (max_payload + 2), so - * if we set this to max_speed + 7, we get the right value. - */ - max_payload = min(device->max_speed + 7, - device->card->max_receive - 1); + orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); orb->request.misc = cpu_to_be32( - COMMAND_ORB_MAX_PAYLOAD(max_payload) | + COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) | COMMAND_ORB_SPEED(device->max_speed) | COMMAND_ORB_NOTIFY); -- cgit v1.2.3 From f746072abc12d0e10ecd7847f1846157fde15987 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 24 Jan 2009 19:41:46 +0100 Subject: firewire: sbp2: define some magic numbers as macros Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index ac8038431585..5739caaaec7b 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -311,14 +311,16 @@ struct sbp2_command_orb { dma_addr_t page_table_bus; }; +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ + /* * List of devices with known bugs. * * The firmware_revision field, masked with 0xffff00, is the best * indicator for the type of bridge chip of a device. It yields a few * false positives but this did not break correctly behaving devices - * so far. We use ~0 as a wildcard, since the 24 bit values we get - * from the config rom can never match that. + * so far. */ static const struct { u32 firmware_revision; @@ -340,22 +342,22 @@ static const struct { }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, @@ -1093,7 +1095,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, continue; if (sbp2_workarounds_table[i].model != model && - sbp2_workarounds_table[i].model != ~0) + sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD) continue; w |= sbp2_workarounds_table[i].workarounds; @@ -1143,14 +1145,13 @@ static int sbp2_probe(struct device *dev) fw_device_get(device); fw_unit_get(unit); - /* Initialize to values that won't match anything in our table. */ - firmware_revision = 0xff000000; - model = 0xff000000; - /* implicit directory ID */ tgt->directory_id = ((unit->directory - device->config_rom) * 4 + CSR_CONFIG_ROM) & 0xffffff; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = SBP2_ROM_VALUE_MISSING; + if (sbp2_scan_unit_dir(tgt, unit->directory, &model, &firmware_revision) < 0) goto fail_tgt_put; -- cgit v1.2.3 From 5e2125677fd72d36396cc537466e07ffcbbd4b2b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 28 Jan 2009 01:03:34 +0100 Subject: firewire: sbp2: fix DMA mapping leak on the failure path Reported-by: FUJITA Tomonori who also provided a first version of the fix. Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 5739caaaec7b..6635925a3758 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1284,6 +1284,19 @@ static struct fw_driver sbp2_driver = { .id_table = sbp2_id_table, }; +static void sbp2_unmap_scatterlist(struct device *card_device, + struct sbp2_command_orb *orb) +{ + if (scsi_sg_count(orb->cmd)) + dma_unmap_sg(card_device, scsi_sglist(orb->cmd), + scsi_sg_count(orb->cmd), + orb->cmd->sc_data_direction); + + if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT)) + dma_unmap_single(card_device, orb->page_table_bus, + sizeof(orb->page_table), DMA_TO_DEVICE); +} + static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data) { @@ -1363,15 +1376,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) dma_unmap_single(device->card->device, orb->base.request_bus, sizeof(orb->request), DMA_TO_DEVICE); - - if (scsi_sg_count(orb->cmd) > 0) - dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd), - scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); - - if (orb->page_table_bus != 0) - dma_unmap_single(device->card->device, orb->page_table_bus, - sizeof(orb->page_table), DMA_TO_DEVICE); + sbp2_unmap_scatterlist(device->card->device, orb); orb->cmd->result = result; orb->done(orb->cmd); @@ -1493,8 +1498,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->base.request_bus = dma_map_single(device->card->device, &orb->request, sizeof(orb->request), DMA_TO_DEVICE); - if (dma_mapping_error(device->card->device, orb->base.request_bus)) + if (dma_mapping_error(device->card->device, orb->base.request_bus)) { + sbp2_unmap_scatterlist(device->card->device, orb); goto out; + } sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation, lu->command_block_agent_address + SBP2_ORB_POINTER); -- cgit v1.2.3 From c69a1f09430c7a62b87af89383998256fcf07685 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 16 Jan 2009 17:59:15 -0800 Subject: Staging: comedi: fix Kbuild comedi doesn't like being built into the kernel right now, so force it to be a module. Reported-by: Kamalesh Babulal Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index b501bfb9c754..b47ca1e7e383 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,6 +1,7 @@ config COMEDI tristate "Data Acquision support (comedi)" default N + depends on m ---help--- Enable support a wide range of data acquision devices for Linux. -- cgit v1.2.3 From 7c5151fbf134e082bc7f2c0ed02684ed12578b3b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 16 Jan 2009 18:01:57 -0800 Subject: Staging: meilhaus: fix Kbuild The Meilhaus drivers do not like being built into the kernel right now, so force them to be a module. Reported-by: Kamalesh Babulal Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/meilhaus/Kconfig | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig index 6def83fa2c96..923af22a4686 100644 --- a/drivers/staging/meilhaus/Kconfig +++ b/drivers/staging/meilhaus/Kconfig @@ -4,6 +4,7 @@ menuconfig MEILHAUS tristate "Meilhaus support" + depends on m ---help--- If you have a Meilhaus card, say Y (or M) here. @@ -18,7 +19,7 @@ if MEILHAUS config ME0600 tristate "Meilhaus ME-600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-600 family of boards that do data collection and multipurpose I/O. @@ -29,7 +30,7 @@ config ME0600 config ME0900 tristate "Meilhaus ME-900 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-900 family of boards that do data collection and multipurpose I/O. @@ -40,7 +41,7 @@ config ME0900 config ME1000 tristate "Meilhaus ME-1000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1000 family of boards that do data collection and multipurpose I/O. @@ -51,7 +52,7 @@ config ME1000 config ME1400 tristate "Meilhaus ME-1400 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1400 family of boards that do data collection and multipurpose I/O. @@ -62,7 +63,7 @@ config ME1400 config ME1600 tristate "Meilhaus ME-1600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1600 family of boards that do data collection and multipurpose I/O. @@ -73,7 +74,7 @@ config ME1600 config ME4600 tristate "Meilhaus ME-4600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-4600 family of boards that do data collection and multipurpose I/O. @@ -84,7 +85,7 @@ config ME4600 config ME6000 tristate "Meilhaus ME-6000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-6000 family of boards that do data collection and multipurpose I/O. @@ -95,7 +96,7 @@ config ME6000 config ME8100 tristate "Meilhaus ME-8100 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8100 family of boards that do data collection and multipurpose I/O. @@ -106,7 +107,7 @@ config ME8100 config ME8200 tristate "Meilhaus ME-8200 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8200 family of boards that do data collection and multipurpose I/O. @@ -117,7 +118,7 @@ config ME8200 config MEDUMMY tristate "Meilhaus dummy driver" default n - depends on PCI + depends on PCI && m help This provides a dummy driver for the Meilhaus driver package -- cgit v1.2.3 From c171ac36b74f6c90bc7a03c309136ba175314b6d Mon Sep 17 00:00:00 2001 From: Arve HjønnevÃ¥g Date: Thu, 8 Jan 2009 15:28:50 -0800 Subject: Staging: android: binder: fix arm build errors Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/binder.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 6a4ceacb33f5..ab014bc96831 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); dump_stack(); } static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); proc->vma = NULL; } @@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_end = vma->vm_start + SZ_4M; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) { ret = -EPERM; -- cgit v1.2.3 From 2d0db6bf5010c26beb1ccbd4ee50991fd2c05d90 Mon Sep 17 00:00:00 2001 From: Arve HjønnevÃ¥g Date: Thu, 8 Jan 2009 16:48:46 -0800 Subject: Staging: android: timed_gpio: Fix build to build on kernels after 2.6.25. Reported-by: Randy Dunlap Cc: Mike Lockwood Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/timed_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bea68c9fc942..b41b20e34628 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include "timed_gpio.h" -- cgit v1.2.3 From 07960058f0ce77ddc3027d3e45a5de1fb977334f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Jan 2009 15:42:43 -0800 Subject: Staging: android: fix build error on 64bit boxes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ktime_t isn't ment to directly access on all arches, so use the proper conversion functions instead to figure out what time is remaining. Reported-by: Randy Dunlap Cc: Arve HjønnevÃ¥g Cc: Mike Lockwood Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/timed_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index b41b20e34628..903270cbbe02 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); - remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000; + struct timeval t = ktime_to_timeval(r); + remaining = t.tv_sec * 1000 + t.tv_usec; } else remaining = 0; -- cgit v1.2.3 From 191805ac41a63929003faa33365027d3fb924d71 Mon Sep 17 00:00:00 2001 From: Arve HjønnevÃ¥g Date: Wed, 14 Jan 2009 16:54:16 -0800 Subject: Staging: android: Add lowmemorykiller documentation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Arve HjønnevÃ¥g Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/lowmemorykiller.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 drivers/staging/android/lowmemorykiller.txt (limited to 'drivers') diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt new file mode 100644 index 000000000000..bd5c0c028968 --- /dev/null +++ b/drivers/staging/android/lowmemorykiller.txt @@ -0,0 +1,16 @@ +The lowmemorykiller driver lets user-space specify a set of memory thresholds +where processes with a range of oom_adj values will get killed. Specify the +minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the +number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both +files take a comma separated list of numbers in ascending order. + +For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and +"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes +with a oom_adj value of 8 or higher when the free memory drops below 4096 pages +and kill processes with a oom_adj value of 0 or higher when the free memory +drops below 1024 pages. + +The driver considers memory used for caches to be free, but if a large +percentage of the cached memory is locked this can be very inaccurate +and processes may not get killed until the normal oom killer is triggered. + -- cgit v1.2.3 From 1176e83aff6f15b6ae4d1b53c16124884ad29363 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 18 Jan 2009 18:17:20 +0100 Subject: Staging: android: task_get_unused_fd_flags: fix the wrong usage of tsk->signal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compile tested. task_struct->signal is not protected by RCU, the code is bogus. Change the code to take ->siglock to pin ->signal. Signed-off-by: Oleg Nesterov Cc: Arve HjønnevÃ¥g Cc: Brian Swetland Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/binder.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index ab014bc96831..758131cad08a 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags) int fd, error; struct fdtable *fdt; unsigned long rlim_cur; + unsigned long irqs; if (files == NULL) return -ESRCH; @@ -335,12 +336,11 @@ repeat: * N.B. For clone tasks sharing a files structure, this test * will limit the total number of files that can be opened. */ - rcu_read_lock(); - if (tsk->signal) + rlim_cur = 0; + if (lock_task_sighand(tsk, &irqs)) { rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - else - rlim_cur = 0; - rcu_read_unlock(); + unlock_task_sighand(tsk, &irqs); + } if (fd >= rlim_cur) goto out; -- cgit v1.2.3 From e48d94dac7eef16b4a4f246bf7b8df0f00cc0aec Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 12 Jan 2009 09:19:42 +0100 Subject: staging: agnx: drivers/staging/agnx/agnx.h needs On m68k: drivers/staging/agnx/agnx.h: In function 'agnx_read32': drivers/staging/agnx/agnx.h:10: error: implicit declaration of function 'ioread32' drivers/staging/agnx/agnx.h: In function 'agnx_write32': drivers/staging/agnx/agnx.h:15: error: implicit declaration of function 'iowrite32' drivers/staging/agnx/sta.c: In function 'get_sta_power': drivers/staging/agnx/sta.c:94: error: implicit declaration of function 'memcpy_fromio' drivers/staging/agnx/sta.c: In function 'set_sta_power': drivers/staging/agnx/sta.c:103: error: implicit declaration of function 'memcpy_toio' Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/staging/agnx/agnx.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h index a75b0db3726c..20f36da62475 100644 --- a/drivers/staging/agnx/agnx.h +++ b/drivers/staging/agnx/agnx.h @@ -1,6 +1,8 @@ #ifndef AGNX_H_ #define AGNX_H_ +#include + #include "xmit.h" #define PFX KBUILD_MODNAME ": " -- cgit v1.2.3 From 05d6d677ab4b975697c6a987f1dffdc55d61a160 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 19 Dec 2008 23:37:30 +0100 Subject: Staging: usbip: usbip_start_threads(): handle kernel_thread failure kernel_thread may fail, notice this. Signed-off-by: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/usbip_common.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 72e209276ea7..22f93dd0ba03 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud) /* * threads are invoked per one device (per one connection). */ - kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); - kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + int retval; + + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n", + ud); + return; + } + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n", + ud); + return; + } /* confirm threads are starting */ wait_for_completion(&ud->tcp_rx.thread_done); -- cgit v1.2.3 From dcbbcefb6a6d540b605421e85fbaa4cea3fef5a2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 28 Jan 2009 22:14:17 +0100 Subject: Staging: poch: fix verification of memory area fix verification of memory area Signed-off-by: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/poch/poch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c index ec343ef53a85..0d111ddfabb2 100644 --- a/drivers/staging/poch/poch.c +++ b/drivers/staging/poch/poch.c @@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp, } break; case POCH_IOC_GET_COUNTERS: - if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) return -EFAULT; spin_lock_irq(&channel->counters_lock); -- cgit v1.2.3 From 7cbcf22548df1f1df7c6b0d0bda579b92efca63c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 20 Jan 2009 16:29:13 -0800 Subject: driver-core: fix kernel-doc parameter name Fix function parameter name in kernel-doc: Warning(linux-next-20090120//drivers/base/core.c:1289): No description found for parameter 'dev' Warning(linux-next-20090120//drivers/base/core.c:1289): Excess function parameter 'root' description in 'root_device_unregister' Signed-off-by: Randy Dunlap Acked-by: Mark McLoughlin Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 55e530942ab0..f3eae630e589 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1280,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register); /** * root_device_unregister - unregister and free a root device - * @root: device going away. + * @dev: device going away * * This function unregisters and cleans up a device that was created by * root_device_register(). -- cgit v1.2.3 From 0fb21de0799a985d2da3da14ae5625d724256638 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 14 Jan 2009 03:03:21 +0100 Subject: HID: adjust report descriptor fixup for MS 1028 receiver Report descriptor fixup for MS 1028 receiver changes also values for Keyboard and Consumer, which incorrectly trims the range, causing correct events being thrown away before passing to userspace. We need to keep the GenDesk usage fixup though, as it reports totally bogus values about axis. Reported-by: Lucas Gadani Signed-off-by: Jiri Kosina --- drivers/hid/hid-microsoft.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index d718b1607d0f..25b10dcad90d 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -30,7 +30,7 @@ #define MS_NOGET 0x10 /* - * Microsoft Wireless Desktop Receiver (Model 1028) has several + * Microsoft Wireless Desktop Receiver (Model 1028) has * 'Usage Min/Max' where it ought to have 'Physical Min/Max' */ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 && - rdesc[286] == 0x2a && rdesc[304] == 0x19 && - rdesc[306] == 0x29 && rdesc[352] == 0x1a && - rdesc[355] == 0x2a && rdesc[557] == 0x19 && + if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver " "Model 1028 report descriptor\n"); - rdesc[284] = rdesc[304] = rdesc[557] = 0x35; - rdesc[352] = 0x36; - rdesc[286] = rdesc[355] = 0x46; - rdesc[306] = rdesc[559] = 0x45; + rdesc[557] = 0x35; + rdesc[559] = 0x45; } } -- cgit v1.2.3 From be5d0c837cf8e43458c5757be5df4837a2803d08 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 28 Jan 2009 09:36:18 +0100 Subject: HID: fix reversed logic in disconnect testing of hiddev The logic for testing for disconnection is reversed in an ioctl leading to false reports of disconnection. Signed-off-by: Oliver Neukum Tested-by: Folkert van Heusden Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index d73eea382ab3..4940e4d70c2d 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case HIDIOCGSTRING: mutex_lock(&hiddev->existancelock); - if (!hiddev->exist) + if (hiddev->exist) r = hiddev_ioctl_string(hiddev, cmd, user_arg); else r = -ENODEV; -- cgit v1.2.3 From 656f1fb90aa2261daa316c0dd8f75e3420f81e9e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 28 Jan 2009 21:22:35 +0100 Subject: HID: add antec-branded soundgraph imon devices to blacklist hid_ignore_list additions for the Antec-branded SoundGraph iMon VFD and LCD devices (0x15c2:0x0044 and 0x0045). These devices are driven by lirc. Signed-off-by: Jarod Wilson Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 ++ drivers/hid/hid-ids.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5d7640e49dc5..7001c31c3f2e 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1606,6 +1606,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index acc1abc834a4..e899f510ebeb 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -362,6 +362,8 @@ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2 0x0036 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3 0x0034 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4 0x0044 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5 0x0045 #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab -- cgit v1.2.3 From bae7eb33b25387fdc7ccae08768bef1f9484a5b0 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 28 Jan 2009 23:06:37 +0100 Subject: HID: document difference between hid_blacklist and hid_ignore_list Many people get it wrong and add device IDs into hid_blacklist instead of hid_ignore_list. Let's put a little comment in place. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7001c31c3f2e..6cad69ed21c5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) } EXPORT_SYMBOL_GPL(hid_connect); +/* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, @@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = { .uevent = hid_uevent, }; +/* a list of devices that shouldn't be handled by HID core at all */ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) }, -- cgit v1.2.3 From 24c3c41584b9331be5e0d18d46943729a5bd2d4e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 7 Jan 2009 22:49:25 -0300 Subject: V4L/DVB (10192): em28xx: fix input selection em28xx were trying to access the third input entry, even for boards that don't support it. This patch reviews the input mux selection fixing this bug and a few other troubles, like not validating the input on one userspace ioctl. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 41 +++++++++++++++++-------------- 1 file changed, 23 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 416b691c33c1..d40650655f74 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -886,10 +886,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) if (0 == INPUT(i)->type) return -EINVAL; - mutex_lock(&dev->lock); - - video_mux(dev, i); + dev->ctl_input = i; + mutex_lock(&dev->lock); + video_mux(dev, dev->ctl_input); mutex_unlock(&dev->lock); return 0; } @@ -939,6 +939,12 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; + + if (a->index >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(a->index)->type) + return -EINVAL; + mutex_lock(&dev->lock); dev->ctl_ainput = INPUT(a->index)->amux; @@ -1957,9 +1963,22 @@ int em28xx_register_analog_devices(struct em28xx *dev) (EM28XX_VERSION_CODE >> 16) & 0xff, (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff); + /* set default norm */ + dev->norm = em28xx_video_template.current_norm; + dev->width = norm_maxw(dev); + dev->height = norm_maxh(dev); + dev->interlaced = EM28XX_INTERLACED_DEFAULT; + dev->hscale = 0; + dev->vscale = 0; + dev->ctl_input = 0; + /* Analog specific initialization */ dev->format = &format[0]; - video_mux(dev, 0); + video_mux(dev, dev->ctl_input); + + /* Audio defaults */ + dev->mute = 1; + dev->volume = 0x1f; /* enable vbi capturing */ @@ -1967,24 +1986,10 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */ em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51); - dev->mute = 1; /* maybe not the right place... */ - dev->volume = 0x1f; - em28xx_set_outfmt(dev); em28xx_colorlevels_set_default(dev); em28xx_compression_disable(dev); - /* set default norm */ - dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; - - /* FIXME: This is a very bad hack! Not all devices have TV on input 2 */ - dev->ctl_input = 2; - /* allocate and fill video video_device struct */ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); if (!dev->vdev) { -- cgit v1.2.3 From 16e68d7cb8eb1c671867d2a0ecd4aa2e17124364 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 6 Jan 2009 22:40:56 -0300 Subject: V4L/DVB (10193): removed unused #include 's Removed unused #include 's in files below, drivers/media/video/cs5345.c drivers/media/video/pwc/pwc-if.c drivers/media/video/saa717x.c drivers/media/video/upd64031a.c drivers/media/video/upd64083.c drivers/media/video/uvc/uvc_ctrl.c drivers/media/video/uvc/uvc_driver.c drivers/media/video/uvc/uvc_queue.c drivers/media/video/uvc/uvc_video.c drivers/media/video/uvc/uvc_status.c Signed-off-by: Huang Weiyi Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cs5345.c | 1 - drivers/media/video/pwc/pwc-if.c | 1 - drivers/media/video/saa717x.c | 1 - drivers/media/video/upd64031a.c | 1 - drivers/media/video/upd64083.c | 1 - drivers/media/video/uvc/uvc_ctrl.c | 1 - drivers/media/video/uvc/uvc_driver.c | 1 - drivers/media/video/uvc/uvc_queue.c | 1 - drivers/media/video/uvc/uvc_status.c | 1 - drivers/media/video/uvc/uvc_video.c | 1 - 10 files changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 14bebf8a116f..87e91072627a 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -18,7 +18,6 @@ */ -#include #include #include #include diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 39fbc970f43d..0d810189dd87 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -62,7 +62,6 @@ #include #include #include -#include #include #include "pwc.h" diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c index 454ad1dd7507..88c5e942f751 100644 --- a/drivers/media/video/saa717x.c +++ b/drivers/media/video/saa717x.c @@ -30,7 +30,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 4f16effb530f..f4522bb08916 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -21,7 +21,6 @@ */ -#include #include #include #include diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 4b712f69d1b7..a5fb74bf2407 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -21,7 +21,6 @@ * 02110-1301, USA. */ -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 2208165aa6f0..c506068bec61 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 89d8bd10a852..a0537464987e 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -24,7 +24,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 42546342e97d..8f676f9d9e39 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index 5d60b264d59a..b482f4fc7b31 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index e7c31995527f..6e9e30f174a1 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -12,7 +12,6 @@ */ #include -#include #include #include #include -- cgit v1.2.3 From bb1b082ed65292fc6fc7e01bbe0dd005d5a4140e Mon Sep 17 00:00:00 2001 From: Yusuf Altin Date: Thu, 8 Jan 2009 07:58:45 -0300 Subject: V4L/DVB (10195): [PATCH] add Terratec Cinergy T Express to dibcom driver This patch introduces support for dvb-t for the following dibcom based card: Terratec Cinergy T Express (USB-ID: 0ccd:0062) Signed-off-by: Yusuf Altin Signed-off-by: Albert Comerma Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 10 ++++++++-- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 391732788911..5e837668fb00 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1393,6 +1393,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1537,7 +1538,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "DiBcom STK7700D reference design", { &dib0700_usb_id_table[14], NULL }, { NULL }, - } + }, + }, .rc_interval = DEFAULT_RC_INTERVAL, @@ -1557,7 +1559,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "ASUS My Cinema U3000 Mini DVBT Tuner", { &dib0700_usb_id_table[23], NULL }, @@ -1566,6 +1568,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Yuan EC372S", { &dib0700_usb_id_table[31], NULL }, { NULL }, + }, + { "Terratec Cinergy T Express", + { &dib0700_usb_id_table[42], NULL }, + { NULL }, } }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index a4fca3fca5ee..2c6f4be05c07 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -164,6 +164,7 @@ #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_PCTV2000E 0x022c -- cgit v1.2.3 From 2c2d264bb951c1a846b86431d3e784edfb79ab39 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 3 Jan 2009 19:12:40 -0300 Subject: V4L/DVB (10197): uvcvideo: Whitespace and comments cleanup, copyright updates. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 6 +- drivers/media/video/uvc/uvc_driver.c | 52 ++++---- drivers/media/video/uvc/uvc_isight.c | 2 + drivers/media/video/uvc/uvc_queue.c | 30 ++--- drivers/media/video/uvc/uvc_status.c | 2 +- drivers/media/video/uvc/uvc_v4l2.c | 10 +- drivers/media/video/uvc/uvc_video.c | 28 +++-- drivers/media/video/uvc/uvcvideo.h | 232 +++++++++++++++++------------------ 8 files changed, 184 insertions(+), 178 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index c506068bec61..d2576f6391c0 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1,7 +1,7 @@ /* * uvc_ctrl.c -- USB Video Class driver - Controls * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -28,7 +28,7 @@ #define UVC_CTRL_DATA_BACKUP 1 /* ------------------------------------------------------------------------ - * Control, formats, ... + * Controls */ static struct uvc_control_info uvc_ctrls[] = { @@ -634,7 +634,7 @@ static __s32 uvc_get_le_value(struct uvc_control_mapping *mapping, mask = (1 << bits) - 1; } - /* Sign-extend the value if needed */ + /* Sign-extend the value if needed. */ if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) value |= -(value & (1 << (mapping->size - 1))); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index a0537464987e..20c16c4a62d1 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1,7 +1,7 @@ /* * uvc_driver.c -- USB Video Class driver * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -48,7 +48,7 @@ static unsigned int uvc_quirks_param; unsigned int uvc_trace_param; /* ------------------------------------------------------------------------ - * Control, formats, ... + * Video formats */ static struct uvc_format_desc uvc_fmts[] = { @@ -473,7 +473,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize * completely. Observed behaviours range from setting the - * value to 1.1x the actual frame size of hardwiring the + * value to 1.1x the actual frame size to hardwiring the * 16 low bits to 0. This results in a higher than necessary * memory usage as well as a wrong image size information. For * uncompressed formats this can be fixed by computing the @@ -486,7 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Some bogus devices report dwMinFrameInterval equal to * dwMaxFrameInterval and have dwFrameIntervalStep set to * zero. Setting all null intervals to 1 fixes the problem and - * some other divisions by zero which could happen. + * some other divisions by zero that could happen. */ for (i = 0; i < n; ++i) { interval = get_unaligned_le32(&buffer[26+4*i]); @@ -1199,13 +1199,13 @@ static void uvc_unregister_video(struct uvc_device *dev) * Scan the UVC descriptors to locate a chain starting at an Output Terminal * and containing the following units: * - * - a USB Streaming Output Terminal + * - one Output Terminal (USB Streaming or Display) * - zero or one Processing Unit * - zero, one or mode single-input Selector Units * - zero or one multiple-input Selector Units, provided all inputs are * connected to input terminals * - zero, one or mode single-input Extension Units - * - one Camera Input Terminal, or one or more External terminals. + * - one or more Input Terminals (Camera, External or USB Streaming) * * A side forward scan is made on each detected entity to check for additional * extension units. @@ -1530,10 +1530,6 @@ static int uvc_register_video(struct uvc_device *dev) /* Set the driver data before calling video_register_device, otherwise * uvc_v4l2_open might race us. - * - * FIXME: usb_set_intfdata hasn't been called so far. Is that a - * problem ? Does any function which could be called here get - * a pointer to the usb_interface ? */ dev->video.vdev = vdev; video_set_drvdata(vdev, &dev->video); @@ -1568,7 +1564,7 @@ void uvc_delete(struct kref *kref) struct uvc_device *dev = container_of(kref, struct uvc_device, kref); struct list_head *p, *n; - /* Unregister the video device */ + /* Unregister the video device. */ uvc_unregister_video(dev); usb_put_intf(dev->intf); usb_put_dev(dev->udev); @@ -1611,7 +1607,7 @@ static int uvc_probe(struct usb_interface *intf, uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", udev->devpath); - /* Allocate memory for the device and initialize it */ + /* Allocate memory for the device and initialize it. */ if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) return -ENOMEM; @@ -1632,7 +1628,7 @@ static int uvc_probe(struct usb_interface *intf, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); - /* Parse the Video Class control descriptor */ + /* Parse the Video Class control descriptor. */ if (uvc_parse_control(dev) < 0) { uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " "descriptors.\n"); @@ -1652,18 +1648,18 @@ static int uvc_probe(struct usb_interface *intf, "linux-uvc-devel mailing list.\n"); } - /* Initialize controls */ + /* Initialize controls. */ if (uvc_ctrl_init_device(dev) < 0) goto error; - /* Register the video devices */ + /* Register the video devices. */ if (uvc_register_video(dev) < 0) goto error; - /* Save our data pointer in the interface data */ + /* Save our data pointer in the interface data. */ usb_set_intfdata(intf, dev); - /* Initialize the interrupt URB */ + /* Initialize the interrupt URB. */ if ((ret = uvc_status_init(dev)) < 0) { uvc_printk(KERN_INFO, "Unable to initialize the status " "endpoint (%d), status interrupt will not be " @@ -1838,24 +1834,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0 }, /* Apple Built-In iSight */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x05ac, .idProduct = 0x8501, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_BUILTIN_ISIGHT }, /* Genesys Logic USB 2.0 PC Camera */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x05e3, - .idProduct = 0x0505, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, - .driver_info = UVC_QUIRK_STREAM_NO_FID }, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, /* MT6227 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c index 37bdefdbead5..436f462685a0 100644 --- a/drivers/media/video/uvc/uvc_isight.c +++ b/drivers/media/video/uvc/uvc_isight.c @@ -3,6 +3,8 @@ * * Copyright (C) 2006-2007 * Ivan N. Zlatev + * Copyright (C) 2008-2009 + * Laurent Pinchart * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 8f676f9d9e39..0155752e4a5a 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -1,7 +1,7 @@ /* * uvc_queue.c -- USB Video Class driver - Buffers management * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -36,22 +36,22 @@ * to user space will return -EBUSY. * * Video buffers are managed using two queues. However, unlike most USB video - * drivers which use an in queue and an out queue, we use a main queue which - * holds all queued buffers (both 'empty' and 'done' buffers), and an irq - * queue which holds empty buffers. This design (copied from video-buf) - * minimizes locking in interrupt, as only one queue is shared between - * interrupt and user contexts. + * drivers that use an in queue and an out queue, we use a main queue to hold + * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to + * hold empty buffers. This design (copied from video-buf) minimizes locking + * in interrupt, as only one queue is shared between interrupt and user + * contexts. * * Use cases * --------- * - * Unless stated otherwise, all operations which modify the irq buffers queue + * Unless stated otherwise, all operations that modify the irq buffers queue * are protected by the irq spinlock. * * 1. The user queues the buffers, starts streaming and dequeues a buffer. * * The buffers are added to the main and irq queues. Both operations are - * protected by the queue lock, and the latert is protected by the irq + * protected by the queue lock, and the later is protected by the irq * spinlock as well. * * The completion handler fetches a buffer from the irq queue and fills it @@ -59,7 +59,7 @@ * returns immediately. * * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. * At that point, any process waiting on the buffer will be woken up. If a * process tries to dequeue a buffer after it has been marked ready, the * dequeing will succeed immediately. @@ -90,8 +90,8 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) /* * Allocate the video buffers. * - * Pages are reserved to make sure they will not be swaped, as they will be - * filled in URB completion handler. + * Pages are reserved to make sure they will not be swapped, as they will be + * filled in the URB completion handler. * * Buffers will be individually mapped, so they must all be page aligned. */ @@ -209,8 +209,8 @@ int uvc_query_buffer(struct uvc_video_queue *queue, __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); done: - mutex_unlock(&queue->mutex); - return ret; + mutex_unlock(&queue->mutex); + return ret; } /* @@ -235,7 +235,7 @@ int uvc_queue_buffer(struct uvc_video_queue *queue, } mutex_lock(&queue->mutex); - if (v4l2_buf->index >= queue->count) { + if (v4l2_buf->index >= queue->count) { uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); ret = -EINVAL; goto done; @@ -428,7 +428,7 @@ done: * Cancel the video buffers queue. * * Cancelling the queue marks all buffers on the irq queue as erroneous, - * wakes them up and remove them from the queue. + * wakes them up and removes them from the queue. * * If the disconnect parameter is set, further calls to uvc_queue_buffer will * fail with -ENODEV. diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index b482f4fc7b31..c1e4ae27c613 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -1,7 +1,7 @@ /* * uvc_status.c -- USB Video Class driver - Status endpoint * - * Copyright (C) 2007-2008 + * Copyright (C) 2007-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index fa150fff2c10..d681519d0c8a 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -1,7 +1,7 @@ /* * uvc_v4l2.c -- USB Video Class driver - V4L2 API * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -37,7 +37,7 @@ * must be grouped (for instance the Red Balance, Blue Balance and Do White * Balance V4L2 controls use the White Balance Component UVC control) or * otherwise translated. The approach we take here is to use a translation - * table for the controls which can be mapped directly, and handle the others + * table for the controls that can be mapped directly, and handle the others * manually. */ static int uvc_v4l2_query_menu(struct uvc_video_device *video, @@ -189,7 +189,7 @@ static int uvc_v4l2_try_format(struct uvc_video_device *video, probe->dwMaxVideoFrameSize = video->streaming->ctrl.dwMaxVideoFrameSize; - /* Probe the device */ + /* Probe the device. */ if ((ret = uvc_probe_video(video, probe)) < 0) goto done; @@ -354,11 +354,11 @@ static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, * * Each open instance of a UVC device can either be in a privileged or * unprivileged state. Only a single instance can be in a privileged state at - * a given time. Trying to perform an operation which requires privileges will + * a given time. Trying to perform an operation that requires privileges will * automatically acquire the required privileges if possible, or return -EBUSY * otherwise. Privileges are dismissed when closing the instance. * - * Operations which require privileges are: + * Operations that require privileges are: * * - VIDIOC_S_INPUT * - VIDIOC_S_PARM diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 6e9e30f174a1..f9eb0e974051 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -1,7 +1,7 @@ /* * uvc_video.c -- USB Video Class driver - Video handling * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -159,7 +159,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, } /* Some broken devices return a null or wrong dwMaxVideoFrameSize. - * Try to get the value from the format and frame descriptor. + * Try to get the value from the format and frame descriptors. */ uvc_fixup_buffer_size(video, ctrl); ret = 0; @@ -190,9 +190,6 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video, *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); - /* Note: Some of the fields below are not required for IN devices (see - * UVC spec, 4.3.1.1), but we still copy them in case support for OUT - * devices is added in the future. */ put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]); put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]); @@ -399,7 +396,7 @@ static int uvc_video_decode_start(struct uvc_video_device *video, * * Empty buffers (bytesused == 0) don't trigger end of frame detection * as it doesn't make sense to return an empty buffer. This also - * avoids detecting and of frame conditions at FID toggling if the + * avoids detecting end of frame conditions at FID toggling if the * previous payload had the EOF bit set. */ if (fid != video->last_fid && buf->buf.bytesused != 0) { @@ -452,6 +449,17 @@ static void uvc_video_decode_end(struct uvc_video_device *video, } } +/* Video payload encoding is handled by uvc_video_encode_header() and + * uvc_video_encode_data(). Only bulk transfers are currently supported. + * + * uvc_video_encode_header is called at the start of a payload. It adds header + * data to the transfer buffer and returns the header size. As the only known + * UVC output device transfers a whole frame in a single payload, the EOF bit + * is always set in the header. + * + * uvc_video_encode_data is called for every URB and copies the data from the + * video buffer to the transfer buffer. + */ static int uvc_video_encode_header(struct uvc_video_device *video, struct uvc_buffer *buf, __u8 *data, int len) { @@ -952,7 +960,7 @@ int uvc_video_suspend(struct uvc_video_device *video) } /* - * Reconfigure the video interface and restart streaming if it was enable + * Reconfigure the video interface and restart streaming if it was enabled * before suspend. * * If an error occurs, disable the video queue. This will wake all pending @@ -984,8 +992,8 @@ int uvc_video_resume(struct uvc_video_device *video) */ /* - * Initialize the UVC video device by retrieving the default format and - * committing it. + * Initialize the UVC video device by switching to alternate setting 0 and + * retrieve the default format. * * Some cameras (namely the Fuji Finepix) set the format and frame * indexes to zero. The UVC standard doesn't clearly make this a spec @@ -1013,7 +1021,7 @@ int uvc_video_init(struct uvc_video_device *video) */ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); - /* Some webcams don't suport GET_DEF request on the probe control. We + /* Some webcams don't suport GET_DEF requests on the probe control. We * fall back to GET_CUR if GET_DEF fails. */ if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bcf4361dc1bc..027947ea9b6e 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -72,149 +72,149 @@ struct uvc_xu_control { * UVC constants */ -#define SC_UNDEFINED 0x00 -#define SC_VIDEOCONTROL 0x01 -#define SC_VIDEOSTREAMING 0x02 -#define SC_VIDEO_INTERFACE_COLLECTION 0x03 +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 -#define PC_PROTOCOL_UNDEFINED 0x00 +#define PC_PROTOCOL_UNDEFINED 0x00 -#define CS_UNDEFINED 0x20 -#define CS_DEVICE 0x21 -#define CS_CONFIGURATION 0x22 -#define CS_STRING 0x23 -#define CS_INTERFACE 0x24 -#define CS_ENDPOINT 0x25 +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 /* VideoControl class specific interface descriptor */ -#define VC_DESCRIPTOR_UNDEFINED 0x00 -#define VC_HEADER 0x01 -#define VC_INPUT_TERMINAL 0x02 -#define VC_OUTPUT_TERMINAL 0x03 -#define VC_SELECTOR_UNIT 0x04 -#define VC_PROCESSING_UNIT 0x05 -#define VC_EXTENSION_UNIT 0x06 +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 /* VideoStreaming class specific interface descriptor */ -#define VS_UNDEFINED 0x00 -#define VS_INPUT_HEADER 0x01 -#define VS_OUTPUT_HEADER 0x02 -#define VS_STILL_IMAGE_FRAME 0x03 -#define VS_FORMAT_UNCOMPRESSED 0x04 -#define VS_FRAME_UNCOMPRESSED 0x05 -#define VS_FORMAT_MJPEG 0x06 -#define VS_FRAME_MJPEG 0x07 -#define VS_FORMAT_MPEG2TS 0x0a -#define VS_FORMAT_DV 0x0c -#define VS_COLORFORMAT 0x0d -#define VS_FORMAT_FRAME_BASED 0x10 -#define VS_FRAME_FRAME_BASED 0x11 -#define VS_FORMAT_STREAM_BASED 0x12 +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 /* Endpoint type */ -#define EP_UNDEFINED 0x00 -#define EP_GENERAL 0x01 -#define EP_ENDPOINT 0x02 -#define EP_INTERRUPT 0x03 +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 /* Request codes */ -#define RC_UNDEFINED 0x00 -#define SET_CUR 0x01 -#define GET_CUR 0x81 -#define GET_MIN 0x82 -#define GET_MAX 0x83 -#define GET_RES 0x84 -#define GET_LEN 0x85 -#define GET_INFO 0x86 -#define GET_DEF 0x87 +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 /* VideoControl interface controls */ -#define VC_CONTROL_UNDEFINED 0x00 -#define VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 /* Terminal controls */ -#define TE_CONTROL_UNDEFINED 0x00 +#define TE_CONTROL_UNDEFINED 0x00 /* Selector Unit controls */ -#define SU_CONTROL_UNDEFINED 0x00 -#define SU_INPUT_SELECT_CONTROL 0x01 +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 /* Camera Terminal controls */ -#define CT_CONTROL_UNDEFINED 0x00 -#define CT_SCANNING_MODE_CONTROL 0x01 -#define CT_AE_MODE_CONTROL 0x02 -#define CT_AE_PRIORITY_CONTROL 0x03 -#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define CT_FOCUS_RELATIVE_CONTROL 0x07 -#define CT_FOCUS_AUTO_CONTROL 0x08 -#define CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define CT_IRIS_RELATIVE_CONTROL 0x0a -#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define CT_ZOOM_RELATIVE_CONTROL 0x0c -#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define CT_PANTILT_RELATIVE_CONTROL 0x0e -#define CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define CT_ROLL_RELATIVE_CONTROL 0x10 -#define CT_PRIVACY_CONTROL 0x11 +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 /* Processing Unit controls */ -#define PU_CONTROL_UNDEFINED 0x00 -#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define PU_BRIGHTNESS_CONTROL 0x02 -#define PU_CONTRAST_CONTROL 0x03 -#define PU_GAIN_CONTROL 0x04 -#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define PU_HUE_CONTROL 0x06 -#define PU_SATURATION_CONTROL 0x07 -#define PU_SHARPNESS_CONTROL 0x08 -#define PU_GAMMA_CONTROL 0x09 -#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define PU_HUE_AUTO_CONTROL 0x10 -#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 #define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 #define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 /* VideoStreaming interface controls */ -#define VS_CONTROL_UNDEFINED 0x00 -#define VS_PROBE_CONTROL 0x01 -#define VS_COMMIT_CONTROL 0x02 -#define VS_STILL_PROBE_CONTROL 0x03 -#define VS_STILL_COMMIT_CONTROL 0x04 -#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define VS_SYNC_DELAY_CONTROL 0x09 - -#define TT_VENDOR_SPECIFIC 0x0100 -#define TT_STREAMING 0x0101 +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 /* Input Terminal types */ -#define ITT_VENDOR_SPECIFIC 0x0200 -#define ITT_CAMERA 0x0201 -#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 /* Output Terminal types */ -#define OTT_VENDOR_SPECIFIC 0x0300 -#define OTT_DISPLAY 0x0301 -#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 /* External Terminal types */ -#define EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define COMPOSITE_CONNECTOR 0x0401 -#define SVIDEO_CONNECTOR 0x0402 -#define COMPONENT_CONNECTOR 0x0403 +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 #define UVC_TERM_INPUT 0x0000 #define UVC_TERM_OUTPUT 0x8000 @@ -541,11 +541,11 @@ struct uvc_streaming { }; enum uvc_buffer_state { - UVC_BUF_STATE_IDLE = 0, - UVC_BUF_STATE_QUEUED = 1, - UVC_BUF_STATE_ACTIVE = 2, - UVC_BUF_STATE_DONE = 3, - UVC_BUF_STATE_ERROR = 4, + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, }; struct uvc_buffer { -- cgit v1.2.3 From fba4578ee925110587ef9b8b6ddfabf2ce288071 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 3 Jan 2009 19:24:38 -0300 Subject: V4L/DVB (10198): uvcvideo: Print the UVC version number in binary-coded decimal. The UVC specification release number is a binary-coded decimal number, print it as such. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 20c16c4a62d1..b12873265cc5 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1635,7 +1635,7 @@ static int uvc_probe(struct usb_interface *intf, goto error; } - uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n", dev->uvc_version >> 8, dev->uvc_version & 0xff, udev->product ? udev->product : "", le16_to_cpu(udev->descriptor.idVendor), -- cgit v1.2.3 From 51cac8ada5caaade4eca0023042ceb01edd82840 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 3 Jan 2009 20:08:26 -0300 Subject: V4L/DVB (10199): uvcvideo: Fix GET_DEF failure detection. Commit 44f0079ec74330b457d990072c13cbe28b0f1abf erroneously considers all GET_DEF requests as unsuccessful. Fix this by checking the request return value. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index f9eb0e974051..9bc4705be78d 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -114,7 +114,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, ctrl->wCompQuality = le16_to_cpup((__le16 *)data); ret = 0; goto out; - } else if (query == GET_DEF && probe == 1) { + } else if (query == GET_DEF && probe == 1 && ret != size) { /* Many cameras don't support the GET_DEF request on their * video probe control. Warn once and return, the caller will * fall back to GET_CUR. -- cgit v1.2.3 From 77f56279f75b3c1decb4f8a3251b155bb791059e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 8 Jan 2009 17:13:53 -0300 Subject: V4L/DVB (10201): Fixes cx88 compilation bug Randy Dunlap wrote: > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c: In function 'cx88_call_i2c_clients': > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:122: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:123: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:127: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:128: error: 'struct cx88_core' has no member named 'gate_ctrl' Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 60a8b3187f14..6025fdd23344 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -336,8 +336,8 @@ struct cx88_core { /* config info -- dvb */ #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) int (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); - void (*gate_ctrl)(struct cx88_core *core, int open); #endif + void (*gate_ctrl)(struct cx88_core *core, int open); /* state info */ struct task_struct *kthread; -- cgit v1.2.3 From 0c37dd7a9052529cd9346b04530be7878c03e429 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 8 Jan 2009 12:49:17 -0300 Subject: V4L/DVB (10202): [PATCH] v4l/tvp514x: Don't write after line end to avoid: | tvp514x 0-005c: No platform data | !!<3>tvp514x 0-005d: No platform data Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvp514x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index ac9aa40d09f6..8e23aa53c29a 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -1401,7 +1401,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) decoder->pdata = client->dev.platform_data; if (!decoder->pdata) { - v4l_err(client, "No platform data\n!!"); + v4l_err(client, "No platform data!!\n"); return -ENODEV; } /* -- cgit v1.2.3 From d7e43844e40e07cadc48f1733b9738659f83b38c Mon Sep 17 00:00:00 2001 From: Matthias Dahl Date: Fri, 26 Sep 2008 06:29:03 -0300 Subject: V4L/DVB (9054): implement proper locking in the dvb ca en50221 driver Concurrent access to a single DVB CA 50221 interface slot is generally discouraged. The underlying drivers (budget-av, budget-ci) do not implement proper locking and thus two transactions could (and do) interfere with on another. This fixes the following problems seen by others and myself: - sudden i/o errors when writing to the ci device which usually would result in an undefined state of the hw and require a software restart - errors about the CAM trying to send a buffer larger than the agreed size usually also resulting in an undefined state of the hw Due the to design of the DVB CA 50221 driver, implementing the locks in the underlying drivers would not be enough and still leave some race conditions, even though they were harder to trigger. Signed-off-by: Matthias Dahl Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_ca_en50221.c | 24 +++++++++++++++++++++--- drivers/media/dvb/dvb-core/dvb_ca_en50221.h | 6 ++++-- 2 files changed, 25 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index 98ee16773ff2..7e3aeaa7370f 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -93,6 +93,9 @@ struct dvb_ca_slot { /* current state of the CAM */ int slot_state; + /* mutex used for serializing access to one CI slot */ + struct mutex slot_lock; + /* Number of CAMCHANGES that have occurred since last processing */ atomic_t camchange_count; @@ -711,14 +714,20 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b dprintk("%s\n", __func__); - // sanity check + /* sanity check */ if (bytes_write > ca->slot_info[slot].link_buf_size) return -EINVAL; - /* check if interface is actually waiting for us to read from it, or if a read is in progress */ + /* it is possible we are dealing with a single buffer implementation, + thus if there is data available for read or if there is even a read + already in progress, we do nothing but awake the kernel thread to + process the data if necessary. */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exitnowrite; if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + status = -EAGAIN; goto exitnowrite; } @@ -987,6 +996,8 @@ static int dvb_ca_en50221_thread(void *data) /* go through all the slots processing them */ for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); + // check the cam status + deal with CAMCHANGEs while (dvb_ca_en50221_check_camstatus(ca, slot)) { /* clear down an old CI slot if necessary */ @@ -1122,7 +1133,7 @@ static int dvb_ca_en50221_thread(void *data) case DVB_CA_SLOTSTATE_RUNNING: if (!ca->open) - continue; + break; // poll slots for data pktcount = 0; @@ -1146,6 +1157,8 @@ static int dvb_ca_en50221_thread(void *data) } break; } + + mutex_unlock(&ca->slot_info[slot].slot_lock); } } @@ -1181,6 +1194,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case CA_RESET: for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { dvb_ca_en50221_slot_shutdown(ca, slot); if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) @@ -1188,6 +1202,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, slot, DVB_CA_EN50221_CAMCHANGE_INSERTED); } + mutex_unlock(&ca->slot_info[slot].slot_lock); } ca->next_read_slot = 0; dvb_ca_en50221_thread_wakeup(ca); @@ -1308,7 +1323,9 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file, goto exit; } + mutex_lock(&ca->slot_info[slot].slot_lock); status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); + mutex_unlock(&ca->slot_info[slot].slot_lock); if (status == (fraglen + 2)) { written = 1; break; @@ -1664,6 +1681,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; atomic_set(&ca->slot_info[i].camchange_count, 0); ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; + mutex_init(&ca->slot_info[i].slot_lock); } if (signal_pending(current)) { diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h index 8467e63ddc0d..7df2e141187a 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h @@ -45,8 +45,10 @@ struct dvb_ca_en50221 { /* the module owning this structure */ struct module* owner; - /* NOTE: the read_*, write_* and poll_slot_status functions must use locks as - * they may be called from several threads at once */ + /* NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ /* functions for accessing attribute memory on the CAM */ int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address); -- cgit v1.2.3 From dbdf03b48bd32150b4023ea0dd22f566958b6294 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 8 Jan 2009 23:27:32 -0300 Subject: V4L/DVB (10208): zoran: Re-adds udev entry removed by changeset 60b4bde4 Changeset 60b4bde48b36c0315ef41fd38c339b9c7e68c46f removed an unused struct on zoran driver, when compiled with "Y". However, as pointed by Jean Delvare , this is neeeded when the driver is compiled as a module, since udev relies on it to auto-load the module. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 05f39195372e..4e8ecf356ad0 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -153,6 +153,14 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +#if (defined(CONFIG_VIDEO_ZORAN_MODULE) && defined(MODULE)) +static struct pci_device_id zr36067_pci_tbl[] = { + {PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; +MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); +#endif int zoran_num; /* number of Buzs in use */ struct zoran *zoran[BUZ_MAX]; -- cgit v1.2.3 From 3e478c06e83efc365e8351bff7b4c569f22e642d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 9 Jan 2009 08:38:47 -0300 Subject: V4L/DVB (10209): tveeprom: Properly initialize tuner type (BZ#11367) If Hauppauge eeprom is corrupted, the driver returns tuner = 0, instead of TUNER_ABSENT. This makes the drivers to initialize tuner, instead of handling the manual parameter. Since the tuner core rejects that a tuner to have their type changed, this breaks the manual tuner override. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tveeprom.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 3b0b84c2e451..78277abb733b 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -427,6 +427,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; memset(tvee, 0, sizeof(*tvee)); + tvee->tuner_type = TUNER_ABSENT; + tvee->tuner2_type = TUNER_ABSENT; + done = len = beenhere = 0; /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ -- cgit v1.2.3 From 66aa66ea31371daad562bf22ff245caf707d5d40 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Sun, 11 Jan 2009 12:02:54 -0300 Subject: V4L/DVB (10212): Convert to be a pci driver This is a really old and crufty driver that wasn't using the long established pci driver framework. Signed-off-by: Trent Piepho Acked-by: Jean Delvare [mchehab@redhat.com: Cleaned up a few CodingStyle issues] Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 596 +++++++++++++++---------------- drivers/media/video/zoran/zoran_card.h | 2 +- drivers/media/video/zoran/zoran_driver.c | 2 +- 3 files changed, 296 insertions(+), 304 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 4e8ecf356ad0..e987d53c2943 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -153,16 +153,13 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); -#if (defined(CONFIG_VIDEO_ZORAN_MODULE) && defined(MODULE)) static struct pci_device_id zr36067_pci_tbl[] = { - {PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057), }, {0} }; MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); -#endif -int zoran_num; /* number of Buzs in use */ +atomic_t zoran_num = ATOMIC_INIT(0); /* number of Buzs in use */ struct zoran *zoran[BUZ_MAX]; /* videocodec bus functions ZR36060 */ @@ -1146,7 +1143,7 @@ zr36057_init (struct zoran *zr) strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) - goto exit_unregister; + goto exit_free; zoran_init_hardware(zr); if (zr36067_debug > 2) @@ -1161,19 +1158,19 @@ zr36057_init (struct zoran *zr) zr->initialized = 1; return 0; -exit_unregister: - zoran_unregister_i2c(zr); exit_free: kfree(zr->stat_com); kfree(zr->video_dev); return err; } -static void -zoran_release (struct zoran *zr) +static void __devexit zoran_remove(struct pci_dev *pdev) { + struct zoran *zr = pci_get_drvdata(pdev); + if (!zr->initialized) goto exit_free; + /* unregister videocodec bus */ if (zr->codec) { struct videocodec_master *master = zr->codec->master_data; @@ -1202,6 +1199,7 @@ zoran_release (struct zoran *zr) pci_disable_device(zr->pci_dev); video_unregister_device(zr->video_dev); exit_free: + pci_set_drvdata(pdev, NULL); kfree(zr); } @@ -1264,338 +1262,347 @@ zoran_setup_videocodec (struct zoran *zr, * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory */ -static int __devinit -find_zr36057 (void) +static int __devinit zoran_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned char latency, need_latency; struct zoran *zr; - struct pci_dev *dev = NULL; int result; struct videocodec_master *master_vfe = NULL; struct videocodec_master *master_codec = NULL; int card_num; char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name; + unsigned int nr; - zoran_num = 0; - while (zoran_num < BUZ_MAX && - (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) { - card_num = card[zoran_num]; - zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); - if (!zr) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - kzalloc failed\n", - ZORAN_NAME); - continue; - } - zr->pci_dev = dev; - //zr->zr36057_mem = NULL; - zr->id = zoran_num; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); - spin_lock_init(&zr->spinlock); - mutex_init(&zr->resource_lock); - if (pci_enable_device(dev)) - goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); - pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, - &zr->revision); - if (zr->revision < 2) { - dprintk(1, - KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - if (card_num == -1) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } else { - int i; - unsigned short ss_vendor, ss_device; - - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; - dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", - ZR_DEVNAME(zr)); - for (i=0;i= BUZ_MAX) { + dprintk(1, + KERN_ERR + "%s: driver limited to %d card(s) maximum\n", + ZORAN_NAME, BUZ_MAX); + return -ENOENT; + } - if (card_num < 0 || card_num >= NUM_CARDS) { - dprintk(2, - KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); - goto zr_free_mem; - } + card_num = card[nr]; + zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); + if (!zr) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - kzalloc failed\n", + ZORAN_NAME); + /* The entry in zoran[] gets leaked */ + return -ENOMEM; + } + zr->pci_dev = pdev; + zr->id = nr; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); + spin_lock_init(&zr->spinlock); + mutex_init(&zr->resource_lock); + if (pci_enable_device(pdev)) + goto zr_free_mem; + zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); + pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); + if (zr->revision < 2) { + dprintk(1, + KERN_INFO + "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", + ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, + zr->zr36057_adr); - /* even though we make this a non pointer and thus - * theoretically allow for making changes to this struct - * on a per-individual card basis at runtime, this is - * strongly discouraged. This structure is intended to - * keep general card information, no settings or anything */ - zr->card = zoran_cards[card_num]; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), - "%s[%u]", zr->card.name, zr->id); - - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); - if (!zr->zr36057_mem) { + if (card_num == -1) { dprintk(1, KERN_ERR - "%s: find_zr36057() - ioremap failed\n", + "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", ZR_DEVNAME(zr)); goto zr_free_mem; } + } else { + int i; + unsigned short ss_vendor, ss_device; - result = request_irq(zr->pci_dev->irq, - zoran_irq, - IRQF_SHARED | IRQF_DISABLED, - ZR_DEVNAME(zr), - (void *) zr); - if (result < 0) { - if (result == -EINVAL) { + ss_vendor = zr->pci_dev->subsystem_vendor; + ss_device = zr->pci_dev->subsystem_device; + dprintk(1, + KERN_INFO + "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", + ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, + zr->zr36057_adr); + dprintk(1, + KERN_INFO + "%s: subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), ss_vendor, ss_device); + if (card_num == -1) { + dprintk(3, + KERN_DEBUG + "%s: find_zr36057() - trying to autodetect card type\n", + ZR_DEVNAME(zr)); + for (i = 0; i < NUM_CARDS; i++) { + if (ss_vendor == zoran_cards[i].vendor_id && + ss_device == zoran_cards[i].device_id) { + dprintk(3, + KERN_DEBUG + "%s: find_zr36057() - card %s detected\n", + ZR_DEVNAME(zr), + zoran_cards[i].name); + card_num = i; + break; + } + } + if (i == NUM_CARDS) { dprintk(1, KERN_ERR - "%s: find_zr36057() - bad irq number or handler\n", + "%s: find_zr36057() - unknown card\n", ZR_DEVNAME(zr)); - } else if (result == -EBUSY) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", - ZR_DEVNAME(zr), zr->pci_dev->irq); - } else { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - can't assign irq, error code %d\n", - ZR_DEVNAME(zr), result); + goto zr_free_mem; } - goto zr_unmap; } + } - /* set PCI latency timer */ - pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, - &latency); - need_latency = zr->revision > 1 ? 32 : 48; - if (latency != need_latency) { - dprintk(2, - KERN_INFO - "%s: Changing PCI latency from %d to %d.\n", - ZR_DEVNAME(zr), latency, need_latency); - pci_write_config_byte(zr->pci_dev, - PCI_LATENCY_TIMER, - need_latency); - } + if (card_num < 0 || card_num >= NUM_CARDS) { + dprintk(2, + KERN_ERR + "%s: find_zr36057() - invalid cardnum %d\n", + ZR_DEVNAME(zr), card_num); + goto zr_free_mem; + } - zr36057_restart(zr); - /* i2c */ - dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + /* even though we make this a non pointer and thus + * theoretically allow for making changes to this struct + * on a per-individual card basis at runtime, this is + * strongly discouraged. This structure is intended to + * keep general card information, no settings or anything */ + zr->card = zoran_cards[card_num]; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), + "%s[%u]", zr->card.name, zr->id); + + zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); + if (!zr->zr36057_mem) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - ioremap failed\n", ZR_DEVNAME(zr)); + goto zr_free_mem; + } - /* i2c decoder */ - if (decoder[zr->id] != -1) { - i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); - zr->card.i2c_decoder = decoder[zr->id]; - } else if (zr->card.i2c_decoder != 0) { - i2c_dec_name = - i2cid_to_modulename(zr->card.i2c_decoder); + result = request_irq(zr->pci_dev->irq, zoran_irq, + IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr); + if (result < 0) { + if (result == -EINVAL) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - bad irq number or handler\n", + ZR_DEVNAME(zr)); + } else if (result == -EBUSY) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", + ZR_DEVNAME(zr), zr->pci_dev->irq); } else { - i2c_dec_name = NULL; + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't assign irq, error code %d\n", + ZR_DEVNAME(zr), result); } + goto zr_unmap; + } - if (i2c_dec_name) { - if ((result = request_module(i2c_dec_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_dec_name, result); - } - } + /* set PCI latency timer */ + pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + &latency); + need_latency = zr->revision > 1 ? 32 : 48; + if (latency != need_latency) { + dprintk(2, + KERN_INFO + "%s: Changing PCI latency from %d to %d\n", + ZR_DEVNAME(zr), latency, need_latency); + pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + need_latency); + } - /* i2c encoder */ - if (encoder[zr->id] != -1) { - i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); - zr->card.i2c_encoder = encoder[zr->id]; - } else if (zr->card.i2c_encoder != 0) { - i2c_enc_name = - i2cid_to_modulename(zr->card.i2c_encoder); - } else { - i2c_enc_name = NULL; - } + zr36057_restart(zr); + /* i2c */ + dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + ZR_DEVNAME(zr)); + + /* i2c decoder */ + if (decoder[zr->id] != -1) { + i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); + zr->card.i2c_decoder = decoder[zr->id]; + } else if (zr->card.i2c_decoder != 0) { + i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder); + } else { + i2c_dec_name = NULL; + } - if (i2c_enc_name) { - if ((result = request_module(i2c_enc_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_enc_name, result); - } + if (i2c_dec_name) { + result = request_module(i2c_dec_name); + if (result < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_dec_name, result); } + } - if (zoran_register_i2c(zr) < 0) { + /* i2c encoder */ + if (encoder[zr->id] != -1) { + i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); + zr->card.i2c_encoder = encoder[zr->id]; + } else if (zr->card.i2c_encoder != 0) { + i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder); + } else { + i2c_enc_name = NULL; + } + + if (i2c_enc_name) { + result = request_module(i2c_enc_name); + if (result < 0) { dprintk(1, KERN_ERR - "%s: find_zr36057() - can't initialize i2c bus\n", - ZR_DEVNAME(zr)); - goto zr_free_irq; + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_enc_name, result); } + } - dprintk(2, - KERN_INFO "%s: Initializing videocodec bus...\n", + if (zoran_register_i2c(zr) < 0) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't initialize i2c bus\n", ZR_DEVNAME(zr)); + goto zr_free_irq; + } - if (zr->card.video_codec != 0 && - (codec_name = - codecid_to_modulename(zr->card.video_codec)) != NULL) { - if ((result = request_module(codec_name)) < 0) { + dprintk(2, + KERN_INFO "%s: Initializing videocodec bus...\n", + ZR_DEVNAME(zr)); + + if (zr->card.video_codec) { + codec_name = codecid_to_modulename(zr->card.video_codec); + if (codec_name) { + result = request_module(codec_name); + if (result) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), codec_name, result); } } - if (zr->card.video_vfe != 0 && - (vfe_name = - codecid_to_modulename(zr->card.video_vfe)) != NULL) { - if ((result = request_module(vfe_name)) < 0) { + } + if (zr->card.video_vfe) { + vfe_name = codecid_to_modulename(zr->card.video_vfe); + if (vfe_name) { + result = request_module(vfe_name); + if (result < 0) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), vfe_name, result); } } + } - /* reset JPEG codec */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_reset(zr); - /* video bus enabled */ - /* display codec revision */ - if (zr->card.video_codec != 0) { - master_codec = zoran_setup_videocodec(zr, - zr->card.video_codec); - if (!master_codec) - goto zr_unreg_i2c; - zr->codec = videocodec_attach(master_codec); - if (!zr->codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no codec found\n", - ZR_DEVNAME(zr)); - goto zr_free_codec; - } - if (zr->codec->type != zr->card.video_codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - wrong codec\n", - ZR_DEVNAME(zr)); - goto zr_detach_codec; - } + /* reset JPEG codec */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_reset(zr); + /* video bus enabled */ + /* display codec revision */ + if (zr->card.video_codec != 0) { + master_codec = zoran_setup_videocodec(zr, zr->card.video_codec); + if (!master_codec) + goto zr_unreg_i2c; + zr->codec = videocodec_attach(master_codec); + if (!zr->codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no codec found\n", + ZR_DEVNAME(zr)); + goto zr_free_codec; } - if (zr->card.video_vfe != 0) { - master_vfe = zoran_setup_videocodec(zr, - zr->card.video_vfe); - if (!master_vfe) - goto zr_detach_codec; - zr->vfe = videocodec_attach(master_vfe); - if (!zr->vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no VFE found\n", - ZR_DEVNAME(zr)); - goto zr_free_vfe; - } - if (zr->vfe->type != zr->card.video_vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() = wrong VFE\n", - ZR_DEVNAME(zr)); - goto zr_detach_vfe; - } + if (zr->codec->type != zr->card.video_codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - wrong codec\n", + ZR_DEVNAME(zr)); + goto zr_detach_codec; } - /* Success so keep the pci_dev referenced */ - pci_dev_get(zr->pci_dev); - zoran[zoran_num++] = zr; - continue; - - // Init errors - zr_detach_vfe: - videocodec_detach(zr->vfe); - zr_free_vfe: - kfree(master_vfe); - zr_detach_codec: - videocodec_detach(zr->codec); - zr_free_codec: - kfree(master_codec); - zr_unreg_i2c: - zoran_unregister_i2c(zr); - zr_free_irq: - btwrite(0, ZR36057_SPGPPCR); - free_irq(zr->pci_dev->irq, zr); - zr_unmap: - iounmap(zr->zr36057_mem); - zr_free_mem: - kfree(zr); - continue; } - if (dev) /* Clean up ref count on early exit */ - pci_dev_put(dev); + if (zr->card.video_vfe != 0) { + master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe); + if (!master_vfe) + goto zr_detach_codec; + zr->vfe = videocodec_attach(master_vfe); + if (!zr->vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no VFE found\n", + ZR_DEVNAME(zr)); + goto zr_free_vfe; + } + if (zr->vfe->type != zr->card.video_vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() = wrong VFE\n", + ZR_DEVNAME(zr)); + goto zr_detach_vfe; + } + } + zoran[nr] = zr; - if (zoran_num == 0) { - dprintk(1, KERN_INFO "No known MJPEG cards found.\n"); + /* take care of Natoma chipset and a revision 1 zr36057 */ + if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { + zr->jpg_buffers.need_contiguous = 1; + dprintk(1, + KERN_INFO + "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", + ZR_DEVNAME(zr)); } - return zoran_num; + + if (zr36057_init(zr) < 0) + goto zr_detach_vfe; + + zoran_proc_init(zr); + + pci_set_drvdata(pdev, zr); + + return 0; + +zr_detach_vfe: + videocodec_detach(zr->vfe); +zr_free_vfe: + kfree(master_vfe); +zr_detach_codec: + videocodec_detach(zr->codec); +zr_free_codec: + kfree(master_codec); +zr_unreg_i2c: + zoran_unregister_i2c(zr); +zr_free_irq: + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); +zr_unmap: + iounmap(zr->zr36057_mem); +zr_free_mem: + kfree(zr); + + return -ENODEV; } -static int __init -init_dc10_cards (void) +static struct pci_driver zoran_driver = { + .name = "zr36067", + .id_table = zr36067_pci_tbl, + .probe = zoran_probe, + .remove = zoran_remove, +}; + +static int __init zoran_init(void) { - int i; + int res; memset(zoran, 0, sizeof(zoran)); printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); - /* Look for cards */ - if (find_zr36057() < 0) { - return -EIO; - } - if (zoran_num == 0) - return -ENODEV; - dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME, - zoran_num); /* check the parameters we have been given, adjust if necessary */ if (v4l_nbufs < 2) v4l_nbufs = 2; @@ -1637,37 +1644,22 @@ init_dc10_cards (void) ZORAN_NAME); } - /* take care of Natoma chipset and a revision 1 zr36057 */ - for (i = 0; i < zoran_num; i++) { - struct zoran *zr = zoran[i]; - - if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { - zr->jpg_buffers.need_contiguous = 1; - dprintk(1, - KERN_INFO - "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", - ZR_DEVNAME(zr)); - } - - if (zr36057_init(zr) < 0) { - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); - return -EIO; - } - zoran_proc_init(zr); + res = pci_register_driver(&zoran_driver); + if (res) { + dprintk(1, + KERN_ERR + "%s: Unable to register ZR36057 driver\n", + ZORAN_NAME); + return res; } return 0; } -static void __exit -unload_dc10_cards (void) +static void __exit zoran_exit(void) { - int i; - - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); + pci_unregister_driver(&zoran_driver); } -module_init(init_dc10_cards); -module_exit(unload_dc10_cards); +module_init(zoran_init); +module_exit(zoran_exit); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index e4dc9d29b404..c989448a77de 100644 --- a/drivers/media/video/zoran/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h @@ -40,7 +40,7 @@ extern int zr36067_debug; /* Anybody who uses more than four? */ #define BUZ_MAX 4 -extern int zoran_num; +extern atomic_t zoran_num; extern struct zoran *zoran[BUZ_MAX]; extern struct video_device zoran_template; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index b58b9dda715c..5e667fd72725 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1206,7 +1206,7 @@ zoran_open(struct file *file) lock_kernel(); /* find the device */ - for (i = 0; i < zoran_num; i++) { + for (i = 0; i < atomic_read(&zoran_num); i++) { if (zoran[i]->video_dev->minor == minor) { zr = zoran[i]; break; -- cgit v1.2.3 From 9c17e2ea1e91ed694c3869c860a04507b103f5e6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 10 Jan 2009 08:31:15 -0300 Subject: V4L/DVB (10214): Fix 'stb0899_get_srate' defined but not used warning Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/stb0899_algo.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c index 83dc7e12d5f0..a67d1775a43c 100644 --- a/drivers/media/dvb/frontends/stb0899_algo.c +++ b/drivers/media/dvb/frontends/stb0899_algo.c @@ -31,6 +31,8 @@ inline u32 stb0899_do_div(u64 n, u32 d) return n; } +#if 0 +/* These functions are currently unused */ /* * stb0899_calc_srate * Compute symbol rate @@ -63,6 +65,7 @@ static u32 stb0899_get_srate(struct stb0899_state *state) return stb0899_calc_srate(internal->master_clk, sfr); } +#endif /* * stb0899_set_srate -- cgit v1.2.3 From 0f3559ef17362a7dd5017521a4dd4cad31263395 Mon Sep 17 00:00:00 2001 From: Martin Dauskardt Date: Sat, 10 Jan 2009 10:16:16 -0300 Subject: V4L/DVB (10216): saa7127: fix broken S-Video with saa7129 Register 0x2d has to be set differently in the saa7129 compared to the saa7127. This was not done correctly, so S-Video was broken in certain circumstances. This fixes a regression introduced in 2.6.28. Signed-off-by: Martin Dauskardt Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7127.c | 52 +++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index d6848f7a503b..05221d47dd4c 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -149,7 +149,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = { { SAA7127_REG_COPYGEN_0, 0x77 }, { SAA7127_REG_COPYGEN_1, 0x41 }, { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ - { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x9e }, + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ @@ -488,12 +488,18 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_COMPOSITE: - state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x20; /* CVBS only */ + else + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; case SAA7127_OUTPUT_TYPE_SVIDEO: - state->reg_2d = 0xff; /* 11111111 croma -> R, luma -> CVBS + G + B */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x18; /* Y + C */ + else + state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -508,7 +514,10 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_BOTH: - state->reg_2d = 0xbf; + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x38; + else + state->reg_2d = 0xbf; state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -731,24 +740,6 @@ static int saa7127_probe(struct i2c_client *client, return -ENODEV; } - /* Configure Encoder */ - - v4l2_dbg(1, debug, sd, "Configuring encoder\n"); - saa7127_write_inittab(sd, saa7127_init_config_common); - saa7127_set_std(sd, V4L2_STD_NTSC); - saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); - saa7127_set_vps(sd, &vbi); - saa7127_set_wss(sd, &vbi); - saa7127_set_cc(sd, &vbi); - saa7127_set_xds(sd, &vbi); - if (test_image == 1) - /* The Encoder has an internal Colorbar generator */ - /* This can be used for debugging */ - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); - else - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); - saa7127_set_video_enable(sd, 1); - if (id->driver_data) { /* Chip type is already known */ state->ident = id->driver_data; } else { /* Needs detection */ @@ -770,6 +761,23 @@ static int saa7127_probe(struct i2c_client *client, v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, client->addr << 1, client->adapter->name); + + v4l2_dbg(1, debug, sd, "Configuring encoder\n"); + saa7127_write_inittab(sd, saa7127_init_config_common); + saa7127_set_std(sd, V4L2_STD_NTSC); + saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(sd, &vbi); + saa7127_set_wss(sd, &vbi); + saa7127_set_cc(sd, &vbi); + saa7127_set_xds(sd, &vbi); + if (test_image == 1) + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); + else + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); + saa7127_set_video_enable(sd, 1); + if (state->ident == V4L2_IDENT_SAA7129) saa7127_write_inittab(sd, saa7129_init_config_extra); return 0; -- cgit v1.2.3 From cd8f894eacf13996d920fdd2aef1afc55156b191 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 9 Jan 2009 22:59:27 -0300 Subject: V4L/DVB (10218): cx23885: Fix Oops for mixed install of analog and digital only cards Analog support for HVR-1250 has not been completed, but does exist for the HVR-1800. Since both cards use the same driver, it tries to create the analog dev for both devices, which is not possible. This causes a NULL error to show up in video_open and mpeg_open. -Mark Iterations through the cx23885_devlist must check for NULL pointers as some supported devices only have DVB support at the moment. Mark Jenks encoutered an Oops in a system with both an HVR-1250 and HVR-1800 installed. -Andy Reported-by: Mark Jenks Tested-by: Mark Jenks Signed-off-by: Mark Jenks Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-417.c | 3 ++- drivers/media/video/cx23885/cx23885-video.c | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 8f1db57bd1dd..bfe25841dbf4 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1586,7 +1586,8 @@ static int mpeg_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->v4l_device->minor == minor) { + if (h->v4l_device && + h->v4l_device->minor == minor) { dev = h; break; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 2d81c4d04340..eaa11893bfe9 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -730,12 +730,13 @@ static int video_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->video_dev->minor == minor) { + if (h->video_dev && + h->video_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VIDEO_CAPTURE; } if (h->vbi_dev && - h->vbi_dev->minor == minor) { + h->vbi_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VBI_CAPTURE; } -- cgit v1.2.3 From 7ef5e025535ee220d7ba45dcd82f05ddce8c3e4c Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 10 Jan 2009 18:04:45 -0300 Subject: V4L/DVB (10219): saa7134: Prevent Oops due to stale IRQ status when enabling interrupts When enabling a shared IRQ line, then saa7134_irq handler could be invoked before the driver had completely set up internal structures, due to a shared interrupt line firing. Clear the saa7134 interrupt status reg, before requesting the irq line, so that stale IRQ status isn't processed before the internal structures are set up. Marcin Slusarz recently brought this Oops to the attention of the v4l-dvb lists and provided an initial analysis by investigating reports found here: http://kerneloops.org/guilty.php?guilty=mute_input_7133&version=2.6.27-release&start=1802240&end=1835007&class=oops Reported-by: Marcin Slusarz Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index dfbe08a9ad9b..99221d726edb 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -660,6 +660,10 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, 0); + + /* Clear any stale IRQ reports */ + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); + mutex_init(&dev->lock); spin_lock_init(&dev->slock); -- cgit v1.2.3 From 45bdcefea25cad2d7443f5b45a5319e2bd201048 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10222): zoran: Better syntax for initializing array module params When initializing a module parameter that is a per-card array, use "{ [0 ... (BUZ_MAX-1)] = -1 }" instead of "{ -1, -1, -1, -1 }". This way all of the entries will be correctly set to -1 if someone changes BUZ_MAX to a value other than 4. Adjust some of the parameter help text too. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index e987d53c2943..ae96de08759d 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -61,17 +61,17 @@ extern const struct zoran_format zoran_formats[]; -static int card[BUZ_MAX] = { -1, -1, -1, -1 }; +static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card, "The type of card"); +MODULE_PARM_DESC(card, "Card type"); -static int encoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(encoder, int, NULL, 0444); -MODULE_PARM_DESC(encoder, "i2c TV encoder"); +MODULE_PARM_DESC(encoder, "Video encoder chip"); -static int decoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(decoder, int, NULL, 0444); -MODULE_PARM_DESC(decoder, "i2c TV decoder"); +MODULE_PARM_DESC(decoder, "Video decoder chip"); /* The video mem address of the video card. @@ -104,9 +104,9 @@ module_param(default_norm, int, 0444); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); /* /dev/videoN, -1 for autodetect */ -static int video_nr[BUZ_MAX] = {-1, -1, -1, -1}; +static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(video_nr, int, NULL, 0444); -MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); +MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)"); /* Number and size of grab buffers for Video 4 Linux -- cgit v1.2.3 From 601139e08339b15997c6ae638dc5bf42c51ea204 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10223): zoran: Remove global device array The driver was keeping a global array with an entry for each zoran device probed. It was a leftover from when the driver didn't dynamically allocate the driver data for each device. There was only one use left, in the video device's ->open() method, looking up the struct zoran for the opened device from the minor number. This can be done better with video_get_drvdata(). Since zoran_num is now only used in the pci driver's ->probe() method, it doesn't need to be an atomic_t and be static. There is a race if multiple zoran cards could be probed at the same time, but currently the probe method for a given driver is single threaded. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 9 +++------ drivers/media/video/zoran/zoran_card.h | 2 -- drivers/media/video/zoran/zoran_driver.c | 25 +++---------------------- 3 files changed, 6 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index ae96de08759d..117650fecd89 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -159,8 +159,7 @@ static struct pci_device_id zr36067_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); -atomic_t zoran_num = ATOMIC_INIT(0); /* number of Buzs in use */ -struct zoran *zoran[BUZ_MAX]; +static unsigned int zoran_num; /* number of cards found */ /* videocodec bus functions ZR36060 */ static u32 @@ -1144,6 +1143,7 @@ zr36057_init (struct zoran *zr) err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) goto exit_free; + video_set_drvdata(zr->video_dev, zr); zoran_init_hardware(zr); if (zr36067_debug > 2) @@ -1275,7 +1275,7 @@ static int __devinit zoran_probe(struct pci_dev *pdev, unsigned int nr; - nr = atomic_inc_return(&zoran_num) - 1; + nr = zoran_num++; if (nr >= BUZ_MAX) { dprintk(1, KERN_ERR @@ -1291,7 +1291,6 @@ static int __devinit zoran_probe(struct pci_dev *pdev, KERN_ERR "%s: find_zr36057() - kzalloc failed\n", ZORAN_NAME); - /* The entry in zoran[] gets leaked */ return -ENOMEM; } zr->pci_dev = pdev; @@ -1547,7 +1546,6 @@ static int __devinit zoran_probe(struct pci_dev *pdev, goto zr_detach_vfe; } } - zoran[nr] = zr; /* take care of Natoma chipset and a revision 1 zr36057 */ if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { @@ -1599,7 +1597,6 @@ static int __init zoran_init(void) { int res; - memset(zoran, 0, sizeof(zoran)); printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index c989448a77de..4507bdc5e338 100644 --- a/drivers/media/video/zoran/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h @@ -40,8 +40,6 @@ extern int zr36067_debug; /* Anybody who uses more than four? */ #define BUZ_MAX 4 -extern atomic_t zoran_num; -extern struct zoran *zoran[BUZ_MAX]; extern struct video_device zoran_template; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 5e667fd72725..21f37a68714b 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1196,28 +1196,13 @@ zoran_close_end_session (struct file *file) * Open a zoran card. Right now the flags stuff is just playing */ -static int -zoran_open(struct file *file) +static int zoran_open(struct file *file) { - unsigned int minor = video_devdata(file)->minor; - struct zoran *zr = NULL; + struct zoran *zr = video_drvdata(file); struct zoran_fh *fh; - int i, res, first_open = 0, have_module_locks = 0; + int res, first_open = 0, have_module_locks = 0; lock_kernel(); - /* find the device */ - for (i = 0; i < atomic_read(&zoran_num); i++) { - if (zoran[i]->video_dev->minor == minor) { - zr = zoran[i]; - break; - } - } - - if (!zr) { - dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME); - res = -ENODEV; - goto open_unlock_and_return; - } /* see fs/device.c - the kernel already locks during open(), * so locking ourselves only causes deadlocks */ @@ -1329,10 +1314,6 @@ open_unlock_and_return: module_put(THIS_MODULE); } - /* if there's no device found, we didn't obtain the lock either */ - if (zr) { - /*mutex_unlock(&zr->resource_lock);*/ - } unlock_kernel(); return res; -- cgit v1.2.3 From 17faeb20912af5d2a1422fdb606e785f9b1d88ba Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10224): zoran: Use pci device table to get card type Instead of using custom code, just let the device layer look it up for us from the pci device table. This requires extending the pci device table to list each known card, plus a catch-all entry for the cards that don't have sub-system vendor/device data. Improve some of the info and error messages too. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran.h | 1 - drivers/media/video/zoran/zoran_card.c | 110 ++++++++++++++------------------- 2 files changed, 47 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 46b7ad477ceb..7273abf5eb46 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -349,7 +349,6 @@ struct card_info { u16 i2c_decoder, i2c_encoder; /* I2C types */ u16 video_vfe, video_codec; /* videocodec types */ u16 audio_chip; /* audio type */ - u16 vendor_id, device_id; /* subsystem vendor/device ID */ int inputs; /* number of video inputs */ struct input { diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 117650fecd89..7b73d83e1273 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -153,8 +153,16 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +#define ZR_DEVICE(subven, subdev, data) { \ + .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ + .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) } + static struct pci_device_id zr36067_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057), }, + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus), + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus), + ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10), + ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ), + ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS), {0} }; MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); @@ -476,8 +484,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC10plus, .name = "DC10plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS, .i2c_decoder = I2C_DRIVERID_SAA7110, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36060, @@ -535,8 +541,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC30plus, .name = "DC30plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS, .i2c_decoder = I2C_DRIVERID_VPX3220, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36050, @@ -593,8 +597,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = LML33R10, .name = "LML33R10", - .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, - .device_id = PCI_DEVICE_ID_LML_33R10, .i2c_decoder = I2C_DRIVERID_SAA7114, .i2c_encoder = I2C_DRIVERID_ADV7170, .video_codec = CODEC_TYPE_ZR36060, @@ -622,8 +624,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = BUZ, .name = "Buz", - .vendor_id = PCI_VENDOR_ID_IOMEGA, - .device_id = PCI_DEVICE_ID_IOMEGA_BUZ, .i2c_decoder = I2C_DRIVERID_SAA7111A, .i2c_encoder = I2C_DRIVERID_SAA7185B, .video_codec = CODEC_TYPE_ZR36060, @@ -653,8 +653,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .name = "6-Eyes", /* AverMedia chose not to brand the 6-Eyes. Thus it can't be autodetected, and requires card=x. */ - .vendor_id = -1, - .device_id = -1, .i2c_decoder = I2C_DRIVERID_KS0127, .i2c_encoder = I2C_DRIVERID_BT866, .video_codec = CODEC_TYPE_ZR36060, @@ -1284,7 +1282,6 @@ static int __devinit zoran_probe(struct pci_dev *pdev, return -ENOENT; } - card_num = card[nr]; zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); if (!zr) { dprintk(1, @@ -1302,68 +1299,55 @@ static int __devinit zoran_probe(struct pci_dev *pdev, goto zr_free_mem; zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); - if (zr->revision < 2) { + + dprintk(1, + KERN_INFO + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08x\n", + ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, + zr->pci_dev->irq, zr->zr36057_adr); + if (zr->revision >= 2) { dprintk(1, KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); + "%s: Subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor, + zr->pci_dev->subsystem_device); + } - if (card_num == -1) { + /* Use auto-detected card type? */ + if (card[nr] == -1) { + if (zr->revision < 2) { + dprintk(1, + KERN_ERR + "%s: No card type specified, please use the card=X module parameter\n", + ZR_DEVNAME(zr)); dprintk(1, KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", + "%s: It is not possible to auto-detect ZR36057 based cards\n", ZR_DEVNAME(zr)); goto zr_free_mem; } - } else { - int i; - unsigned short ss_vendor, ss_device; - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; - dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", + card_num = ent->driver_data; + if (card_num >= NUM_CARDS) { + dprintk(1, + KERN_ERR + "%s: Unknown card, try specifying card=X module parameter\n", ZR_DEVNAME(zr)); - for (i = 0; i < NUM_CARDS; i++) { - if (ss_vendor == zoran_cards[i].vendor_id && - ss_device == zoran_cards[i].device_id) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - card %s detected\n", - ZR_DEVNAME(zr), - zoran_cards[i].name); - card_num = i; - break; - } - } - if (i == NUM_CARDS) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - unknown card\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } + goto zr_free_mem; + } + dprintk(3, + KERN_DEBUG + "%s: %s() - card %s detected\n", + ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name); + } else { + card_num = card[nr]; + if (card_num >= NUM_CARDS || card_num < 0) { + dprintk(1, + KERN_ERR + "%s: User specified card type %d out of range (0 .. %d)\n", + ZR_DEVNAME(zr), card_num, NUM_CARDS - 1); + goto zr_free_mem; } - } - - if (card_num < 0 || card_num >= NUM_CARDS) { - dprintk(2, - KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); - goto zr_free_mem; } /* even though we make this a non pointer and thus -- cgit v1.2.3 From 5e098b668977c85838af09005bd96c2e987654f0 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10225): zoran: Remove zr36057_adr field The driver should only use the kernel mapped io address, zr36057_mem, and not the PCI bus address, zr36057_adr. Since the latter is only printed out once, there is no need to save it in the driver data structure. There was some old code that looked like it was for the Alpha architecture which would use the PCI bus address. It probably no longer applies to modern kernels. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran.h | 11 ++--------- drivers/media/video/zoran/zoran_card.c | 11 +++++------ 2 files changed, 7 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 7273abf5eb46..e873a916250f 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -400,7 +400,6 @@ struct zoran { char name[32]; /* name of this device */ struct pci_dev *pci_dev; /* PCI device */ unsigned char revision; /* revision of zr36057 */ - unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ spinlock_t spinlock; /* Spinlock */ @@ -489,16 +488,10 @@ struct zoran { wait_queue_head_t test_q; }; -/*The following should be done in more portable way. It depends on define - of _ALPHA_BUZ in the Makefile.*/ - -#ifdef _ALPHA_BUZ -#define btwrite(dat,adr) writel((dat), zr->zr36057_adr+(adr)) -#define btread(adr) readl(zr->zr36057_adr+(adr)) -#else +/* There was something called _ALPHA_BUZ that used the PCI address instead of + * the kernel iomapped address for btread/btwrite. */ #define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) #define btread(adr) readl(zr->zr36057_mem+(adr)) -#endif #define btand(dat,adr) btwrite((dat) & btread(adr), adr) #define btor(dat,adr) btwrite((dat) | btread(adr), adr) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 7b73d83e1273..5d2f090aa0f8 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1297,14 +1297,13 @@ static int __devinit zoran_probe(struct pci_dev *pdev, mutex_init(&zr->resource_lock); if (pci_enable_device(pdev)) goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); dprintk(1, KERN_INFO - "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08x\n", + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n", ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, - zr->pci_dev->irq, zr->zr36057_adr); + zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0)); if (zr->revision >= 2) { dprintk(1, KERN_INFO @@ -1359,12 +1358,12 @@ static int __devinit zoran_probe(struct pci_dev *pdev, snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]", zr->card.name, zr->id); - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); + zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0); if (!zr->zr36057_mem) { dprintk(1, KERN_ERR - "%s: find_zr36057() - ioremap failed\n", - ZR_DEVNAME(zr)); + "%s: %s() - ioremap failed\n", + ZR_DEVNAME(zr), __func__); goto zr_free_mem; } -- cgit v1.2.3 From fc96ab730268b8b652ae2494088e8bd4572f58aa Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 12 Jan 2009 13:09:46 -0300 Subject: V4L/DVB (10226): zoran: Get rid of extra module ref count The zoran driver does a module_get/put of THIS_MODULE on device open/close. This isn't necessary as the kernel does this automatically. Clean up the failure path of zoran_open() somewhat. Make the dprintk()s on open/close a higher debug level and make the user count printed take the current open/close into account. Signed-off-by: Trent Piepho Acked-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_driver.c | 82 +++++++++++++------------------- 1 file changed, 33 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 21f37a68714b..120ef235e63d 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1200,7 +1200,10 @@ static int zoran_open(struct file *file) { struct zoran *zr = video_drvdata(file); struct zoran_fh *fh; - int res, first_open = 0, have_module_locks = 0; + int res, first_open = 0; + + dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1); lock_kernel(); @@ -1208,56 +1211,39 @@ static int zoran_open(struct file *file) * so locking ourselves only causes deadlocks */ /*mutex_lock(&zr->resource_lock);*/ + if (zr->user >= 2048) { + dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", + ZR_DEVNAME(zr), zr->user); + res = -EBUSY; + goto fail_unlock; + } + if (!zr->decoder) { dprintk(1, KERN_ERR "%s: no TV decoder loaded for device!\n", ZR_DEVNAME(zr)); res = -EIO; - goto open_unlock_and_return; + goto fail_unlock; } - /* try to grab a module lock */ - if (!try_module_get(THIS_MODULE)) { - dprintk(1, - KERN_ERR - "%s: failed to acquire my own lock! PANIC!\n", - ZR_DEVNAME(zr)); - res = -ENODEV; - goto open_unlock_and_return; - } if (!try_module_get(zr->decoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c decoder\n", + "%s: failed to grab ownership of video decoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(THIS_MODULE); - goto open_unlock_and_return; + goto fail_unlock; } if (zr->encoder && !try_module_get(zr->encoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c encoder\n", + "%s: failed to grab ownership of video encoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(zr->decoder->driver->driver.owner); - module_put(THIS_MODULE); - goto open_unlock_and_return; - } - - have_module_locks = 1; - - if (zr->user >= 2048) { - dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", - ZR_DEVNAME(zr), zr->user); - res = -EBUSY; - goto open_unlock_and_return; + goto fail_decoder; } - dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); - /* now, create the open()-specific file_ops struct */ fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); if (!fh) { @@ -1266,7 +1252,7 @@ static int zoran_open(struct file *file) "%s: zoran_open() - allocation of zoran_fh failed\n", ZR_DEVNAME(zr)); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_encoder; } /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows * on norm-change! */ @@ -1277,9 +1263,8 @@ static int zoran_open(struct file *file) KERN_ERR "%s: zoran_open() - allocation of overlay_mask failed\n", ZR_DEVNAME(zr)); - kfree(fh); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_fh; } if (zr->user++ == 0) @@ -1304,18 +1289,19 @@ static int zoran_open(struct file *file) return 0; -open_unlock_and_return: - /* if we grabbed locks, release them accordingly */ - if (have_module_locks) { - module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); - } - +fail_fh: + kfree(fh); +fail_encoder: + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); +fail_decoder: + module_put(zr->decoder->driver->driver.owner); +fail_unlock: unlock_kernel(); + dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n", + ZR_DEVNAME(zr), res, zr->user); + return res; } @@ -1325,8 +1311,8 @@ zoran_close(struct file *file) struct zoran_fh *fh = file->private_data; struct zoran *zr = fh->zr; - dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); + dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1); /* kernel locks (fs/device.c), so don't do that ourselves * (prevents deadlocks) */ @@ -1372,10 +1358,8 @@ zoran_close(struct file *file) /* release locks on the i2c modules */ module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); /*mutex_unlock(&zr->resource_lock);*/ -- cgit v1.2.3 From 8866f9cf8d85f3614855a49b9d9056f265d0cd33 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 12 Jan 2009 21:50:52 -0300 Subject: V4L/DVB (10228): em28xx: fix audio output PCM IN selection Some em28xx devices use the PCM IN AC 97 PIN for digital audio. However, currently, the PCM IN selection is not set by the driver. This patch allows specifying the PCM IN expected output, via board description table. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 9 +++++++++ drivers/media/video/em28xx/em28xx.h | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index eb5fb05fab22..69ce78867a49 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -454,6 +454,15 @@ int em28xx_audio_analog_set(struct em28xx *dev) em28xx_warn("couldn't setup AC97 register %d\n", outputs[i].reg); } + + if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) { + int sel = ac97_return_record_select(dev->ctl_aoutput); + + /* Use the same input for both left and right channels */ + sel |= (sel << 8); + + em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel); + } } return ret; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 6c6b94aa05b2..23d1482df2d1 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -300,13 +300,32 @@ enum em28xx_amux { }; enum em28xx_aout { + /* AC97 outputs */ EM28XX_AOUT_MASTER = 1 << 0, EM28XX_AOUT_LINE = 1 << 1, EM28XX_AOUT_MONO = 1 << 2, EM28XX_AOUT_LFE = 1 << 3, EM28XX_AOUT_SURR = 1 << 4, + + /* PCM IN Mixer - used by AC97_RECORD_SELECT register */ + EM28XX_AOUT_PCM_IN = 1 << 7, + + /* Bits 10-8 are used to indicate the PCM IN record select */ + EM28XX_AOUT_PCM_MIC_PCM = 0 << 8, + EM28XX_AOUT_PCM_CD = 1 << 8, + EM28XX_AOUT_PCM_VIDEO = 2 << 8, + EM28XX_AOUT_PCM_AUX = 3 << 8, + EM28XX_AOUT_PCM_LINE = 4 << 8, + EM28XX_AOUT_PCM_STEREO = 5 << 8, + EM28XX_AOUT_PCM_MONO = 6 << 8, + EM28XX_AOUT_PCM_PHONE = 7 << 8, }; +static int ac97_return_record_select(int a_out) +{ + return (a_out & 0x700) >> 8; +} + struct em28xx_reg_seq { int reg; unsigned char val, mask; -- cgit v1.2.3 From 6e0e12f15a503b7096303d495247fbeaa2b12582 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 11 Jan 2009 21:18:04 -0300 Subject: V4L/DVB (10229): cx88-dvb: Fix order of frontend allocations On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote: > hI > > With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel > [ 14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded > [ 14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared > [ 14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68] > [ 14.555374] cx88[0]/2: cx2388x based DVB/ATSC card > [ 14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000 > [ 14.555560] IP: [] __mutex_lock_common+0x3c/0xe4 > [ 14.555652] *pde = 00000000 > [ 14.555735] Oops: 0002 [#1] SMP > [ 14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys > [ 14.557013] > [ 14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1) > [ 14.557013] EIP: 0060:[] EFLAGS: 00010246 CPU: 1 > [ 14.557013] EIP is at __mutex_lock_common+0x3c/0xe4 > [ 14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000 > [ 14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88 > [ 14.557013] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > [ 14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000) > [ 14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110 > [ 14.557013] de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8 > [ 14.557013] e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000 > [ 14.557013] Call Trace: > [ 14.557013] [] ? __mutex_lock_slowpath+0x17/0x1a > [ 14.557013] [] ? mutex_lock+0x12/0x14 > [ 14.557013] [] ? mutex_lock+0x12/0x14 > [ 14.557013] [] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb] > [ 14.557013] [] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb] > [ 14.557013] [] ? cx8802_register_driver+0xbd/0x1ac [cx8802] > [ 14.557013] [] ? cx8802_register_driver+0x106/0x1ac [cx8802] > [ 14.557013] [] ? dvb_init+0x22/0x27 [cx88_dvb] > [ 14.557013] [] ? _stext+0x42/0x11a > [ 14.557013] [] ? dvb_init+0x0/0x27 [cx88_dvb] > [ 14.557013] [] ? __blocking_notifier_call_chain+0xe/0x51 > [ 14.557013] [] ? sys_init_module+0x8c/0x17d > [ 14.557013] [] ? syscall_call+0x7/0xb > [ 14.557013] [] ? round_jiffies_relative+0x14/0x16 > [ 14.557013] ======================= > [ 14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0 > [ 14.557013] EIP: [] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88 > [ 14.565211] ---[ end trace 94d8b014e067ac7b ]--- Tested and confirmed to work by several users at linux-media@vger.kernel.org Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-dvb.c | 72 +++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 613dfea4ff3e..aef5297534af 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -614,34 +614,41 @@ static struct stv0288_config tevii_tuner_earda_config = { .set_ts_params = cx24116_set_ts_param, }; -static int dvb_register(struct cx8802_dev *dev) +static int cx8802_alloc_frontends(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; - struct videobuf_dvb_frontend *fe0, *fe1 = NULL; - int mfe_shared = 0; /* bus not shared by default */ + struct videobuf_dvb_frontend *fe = NULL; int i; - if (0 != core->i2c_rc) { - printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); - goto frontend_detach; - } - - if (!core->board.num_frontends) - return -EINVAL; - mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); + if (!core->board.num_frontends) + return -ENODEV; + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); for (i = 1; i <= core->board.num_frontends; i++) { - fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if (!fe0) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if (!fe) { printk(KERN_ERR "%s() failed to alloc\n", __func__); videobuf_dvb_dealloc_frontends(&dev->frontends); - goto frontend_detach; + return -ENOMEM; } } + return 0; +} + +static int dvb_register(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); @@ -1243,6 +1250,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; int err; + struct videobuf_dvb_frontend *fe; + int i; dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", @@ -1258,39 +1267,34 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* If vp3054 isn't enabled, a stub will just return 0 */ err = vp3054_i2c_probe(dev); if (0 != err) - goto fail_probe; + goto fail_core; /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); dev->ts_gen_cntrl = 0x0c; + err = cx8802_alloc_frontends(dev); + if (err) + goto fail_core; + err = -ENODEV; - if (core->board.num_frontends) { - struct videobuf_dvb_frontend *fe; - int i; - - for (i = 1; i <= core->board.num_frontends; i++) { - fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); - if (fe == NULL) { - printk(KERN_ERR "%s() failed to get frontend(%d)\n", + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (fe == NULL) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); - goto fail_probe; - } - videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, + goto fail_probe; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), dev); - /* init struct videobuf_dvb */ - fe->dvb.name = dev->core->name; - } - } else { - /* no frontends allocated */ - printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n", - core->name); - goto fail_core; + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; } + err = dvb_register(dev); if (err) /* frontends/adapter de-allocated in dvb_register */ -- cgit v1.2.3 From db4b2d193c2d3ad495bcfbce8d4354c1663af2e5 Mon Sep 17 00:00:00 2001 From: Nicolas Fournier Date: Tue, 13 Jan 2009 07:15:25 -0300 Subject: V4L/DVB (10233): [PATCH] Terratec Cinergy DT XS Diversity new USB ID (0ccd:0081) The following patch adds support for a new version of the Terratec Cinergy DT USB XS Diversity Dual DVB-T TV tuner stick. The USB ID of the new stick is 0ccd:0081. The hardware of the stick has changed, when compared to the first version of this stick, but it still uses quite standard components, so that only minor changes are needed to the sources. The patch has been successfully tested with hotplugging the device and then 2 x tzap and 2 x mplayer, to watch two different TV programs simultaneously. The stick works with both, the old and new firmwares: - dvb-usb-dib0700-1.10.fw and - dvb-usb-dib0700-1.20.fw Signed-off-by: Nicolas Fournier Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 8 +++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 5e837668fb00..635d30a55078 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1394,6 +1394,8 @@ struct usb_device_id dib0700_usb_id_table[] = { /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1659,7 +1661,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { } }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[17], NULL }, @@ -1676,6 +1678,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Hauppauge Nova-TD-500 (84xxx)", { &dib0700_usb_id_table[36], NULL }, { NULL }, + }, + { "Terratec Cinergy DT USB XS Diversity", + { &dib0700_usb_id_table[43], NULL }, + { NULL }, } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2c6f4be05c07..0db0c06ee6f2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -162,6 +162,7 @@ #define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 -- cgit v1.2.3 From aeaecaf8eba9efa6a0a623122abb8f61449e42ef Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 14 Jan 2009 04:58:36 -0300 Subject: V4L/DVB (10240): Fix obvious swapped names in v4l2_subdev logic The VIDIOC_QUERYCTRL command needs to actually do a queryctrl, not a querymenu. Similarly, the VIDIOC_QUERYMENU command needs to actually do a querymenu not a queryctrl. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-subdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index fbe9cc0d433a..21208805ea9b 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -28,13 +28,13 @@ int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg) { switch (cmd) { case VIDIOC_QUERYCTRL: - return v4l2_subdev_call(sd, core, querymenu, arg); + return v4l2_subdev_call(sd, core, queryctrl, arg); case VIDIOC_G_CTRL: return v4l2_subdev_call(sd, core, g_ctrl, arg); case VIDIOC_S_CTRL: return v4l2_subdev_call(sd, core, s_ctrl, arg); case VIDIOC_QUERYMENU: - return v4l2_subdev_call(sd, core, queryctrl, arg); + return v4l2_subdev_call(sd, core, querymenu, arg); case VIDIOC_LOG_STATUS: return v4l2_subdev_call(sd, core, log_status); case VIDIOC_DBG_G_CHIP_IDENT: -- cgit v1.2.3 From 32929fb4c7c4a693ed723253b21e7bf3c8cb4b1c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 17 Jan 2009 11:21:02 -0300 Subject: V4L/DVB (10243): em28xx: fix compile warning Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 23d1482df2d1..e15ca2f0fb11 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -321,7 +321,7 @@ enum em28xx_aout { EM28XX_AOUT_PCM_PHONE = 7 << 8, }; -static int ac97_return_record_select(int a_out) +static inline int ac97_return_record_select(int a_out) { return (a_out & 0x700) >> 8; } -- cgit v1.2.3 From cf8e193a48879a02f55b53c0cf2ec98a784baaa5 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 17 Jan 2009 13:09:11 -0300 Subject: V4L/DVB (10248): v4l-dvb: fix a bunch of compile warnings. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/mxl5007t.c | 2 +- drivers/media/dvb/dvb-usb/af9005-fe.c | 2 +- drivers/media/dvb/frontends/drx397xD.c | 2 +- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 2 +- drivers/media/video/tda9875.c | 2 +- drivers/media/video/usbvision/usbvision-i2c.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 64379f2bf237..3ec28945c26f 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -657,7 +657,7 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status) { struct mxl5007t_state *state = fe->tuner_priv; int rf_locked, ref_locked; - s32 rf_input_level; + s32 rf_input_level = 0; int ret; if (fe->ops.i2c_gate_ctrl) diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c index b1a9c4cdec93..199ece0d4883 100644 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ b/drivers/media/dvb/dvb-usb/af9005-fe.c @@ -220,7 +220,7 @@ static int af9005_get_post_vit_ber(struct dvb_frontend *fe, u16 * abort_count) { u32 loc_cw_count = 0, loc_err_count; - u16 loc_abort_count; + u16 loc_abort_count = 0; int ret; ret = diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index ec4e08dbc699..1e81e713df63 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s, u32 edi = 0, ebx = 0, ebp = 0, edx = 0; u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0; - int rc, df_tuner; + int rc, df_tuner = 0; int a, b, c, d; pr_debug("%s %d\n", __func__, s->config.d60); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 0aa96df80fc2..d91e0638448f 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1384,7 +1384,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) static int ttusb_dec_init_stb(struct ttusb_dec *dec) { int result; - unsigned int mode, model, version; + unsigned int mode = 0, model = 0, version = 0; dprintk("%s\n", __func__); diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 56f0c0eb500f..00c6cbe06ab0 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -242,7 +242,7 @@ static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { struct tda9875 *t = to_state(sd); - int chvol=0, volume, balance, left, right; + int chvol = 0, volume = 0, balance = 0, left, right; switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 9907b9aff2b9..6b66ae4f430f 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -157,7 +157,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) struct i2c_msg *pmsg; struct usb_usbvision *usbvision; int i, ret; - unsigned char addr; + unsigned char addr = 0; usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); -- cgit v1.2.3 From ba390f005573bdf6ab7fd78bb05119036c2ed539 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 15 Jan 2009 05:37:14 -0300 Subject: V4L/DVB (10250): cx25840: fix regression: fw not loaded on first use With the conversion to v4l2_subdev one bit of code was accidentally dropped: on receiving the first command the driver has to load the fw. A new init() command was introduced to do that explicitly for bridge drivers that are converted to use v4l2_subdev, but old drivers that are not yet converted no longer worked. This patch fixes this regression for these old drivers. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 88f2fd32bfe3..b3b5b17dc8e7 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1382,6 +1382,14 @@ static int cx25840_log_status(struct v4l2_subdev *sd) static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg) { + /* ignore this command */ + if (cmd == TUNER_SET_TYPE_ADDR) + return 0; + + /* Old-style drivers rely on initialization on first use, so + call the init whenever a command is issued to this driver. + New-style drivers using v4l2_subdev should call init explicitly. */ + cx25840_init(i2c_get_clientdata(client), 0); return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); } -- cgit v1.2.3 From 53d12e5a56934c31ca59f3b6f127e5a68e645fd2 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Fri, 16 Jan 2009 11:23:25 -0300 Subject: V4L/DVB (10254): em28xx: Fix audio URB transfer buffer race condition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit em28xx: Fix audio URB transfer buffer memory leak and race condition/corruption of capture pointer Leak fix kindly contributed by Pádraig Brady. Signed-off-by: Robert Krakora Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 94378ccb7505..4df6d3288424 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -65,6 +65,9 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) usb_unlink_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; + + kfree(dev->adev.transfer_buffer[i]); + dev->adev.transfer_buffer[i] = NULL; } return 0; @@ -389,11 +392,15 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) { - struct em28xx *dev; + unsigned long flags; + struct em28xx *dev; snd_pcm_uframes_t hwptr_done; + dev = snd_pcm_substream_chip(substream); + spin_lock_irqsave(&dev->adev.slock, flags); hwptr_done = dev->adev.hwptr_done_capture; + spin_unlock_irqrestore(&dev->adev.slock, flags); return hwptr_done; } -- cgit v1.2.3 From 7e4b15e4201a101840c226dafe0d3df7ee652bf6 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Sun, 18 Jan 2009 21:45:28 -0300 Subject: V4L/DVB (10256): em28xx: Fix for KWorld 330U AC97 Fix for KWorld 330U AC97 Many thanks to Devin and Mauro again!!! Signed-off-by: Robert Krakora Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 69ce78867a49..71ad35192c06 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -438,6 +438,10 @@ int em28xx_audio_analog_set(struct em28xx *dev) if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { int vol; + em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); + em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); + em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); + /* LSB: left channel - both channels with the same level */ vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8); -- cgit v1.2.3 From 6e7b9ea0937eeb75fa166ef7bd22b5f3bb5676d1 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Sun, 18 Jan 2009 21:59:34 -0300 Subject: V4L/DVB (10257): em28xx: Fix for KWorld 330U Board Fix for KWorld 330U Board Many thanks to Devin and Mauro!!! Signed-off-by: Robert Krakora Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 32 +++++++++++++++++++++++++------ drivers/media/video/em28xx/em28xx-dvb.c | 20 ++++++++++++++++++- drivers/media/video/em28xx/em28xx-video.c | 4 +++- drivers/media/video/em28xx/em28xx.h | 2 +- 4 files changed, 49 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ef9bf008a924..3b3ca3f46d52 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -102,6 +102,18 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2870 Kworld 355u Analog - No input analog */ +static struct em28xx_reg_seq kworld_330u_analog[] = { + {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x00, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq kworld_330u_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -1177,29 +1189,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = hauppauge_wintv_hvr_900_analog, } }, }, - [EM2883_BOARD_KWORLD_HYBRID_A316] = { + [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, - .dvb_gpio = default_digital, + .dvb_gpio = kworld_330u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, } }, }, [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { @@ -1249,7 +1265,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, { USB_DEVICE(0xeb1a, 0xa316), - .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 }, + .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, { USB_DEVICE(0xeb1a, 0xe323), @@ -1526,6 +1542,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC2028_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d38cb21834d9..9ad8527b3fda 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -28,6 +28,7 @@ #include "lgdt330x.h" #include "zl10353.h" +#include "s5h1409.h" #ifdef EM28XX_DRX397XD_SUPPORT #include "drx397xD.h" #endif @@ -232,6 +233,15 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = { .if2 = 45600, }; +static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -412,7 +422,6 @@ static int dvb_init(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: - case EM2883_BOARD_KWORLD_HYBRID_A316: case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: dvb->frontend = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, @@ -433,6 +442,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + dvb->frontend = dvb_attach(s5h1409_attach, + &em28xx_s5h1409_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index d40650655f74..8e61b2ca9167 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1956,6 +1956,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, int em28xx_register_analog_devices(struct em28xx *dev) { + u8 val; int ret; printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n", @@ -1983,7 +1984,8 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* enable vbi capturing */ /* em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */ -/* em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */ + val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK); + em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val)); em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51); em28xx_set_outfmt(dev); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index e15ca2f0fb11..dd2cd36fb1bb 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -94,7 +94,7 @@ #define EM2882_BOARD_KWORLD_VS_DVBT 54 #define EM2882_BOARD_TERRATEC_HYBRID_XS 55 #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 -#define EM2883_BOARD_KWORLD_HYBRID_A316 57 +#define EM2883_BOARD_KWORLD_HYBRID_330U 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61 -- cgit v1.2.3 From 8760e5b6d1dc9527e0f96f80daaa12a8158d9839 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sat, 17 Jan 2009 13:41:54 -0300 Subject: V4L/DVB (10261): em28xx: fix kernel panic on audio shutdown Revert a change made in change 9743 which resulted in a kernel panic in some cases on shutdown of the audio stream. First discovered when working on the Pinnacle 880e support, and later reproduced by a user on the mailing list with the HVR-900 as well. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 4df6d3288424..fcc300c93995 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,7 +62,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_unlink_urb(dev->adev.urb[i]); + usb_kill_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; -- cgit v1.2.3 From 6dbe7af37def293e1116af186c94e2d47d353190 Mon Sep 17 00:00:00 2001 From: Tony Broad Date: Sun, 18 Jan 2009 07:55:38 -0300 Subject: V4L/DVB (10265): budget.c driver: Kernel oops: "BUG: unable to handle kernel paging request at ffffffff I'm using a "Hauppauge WinTV-NOVA-T DVB card" of PCI id "13c2:1005" with kernel 2.6.27.9. I've recently experienced the following fairly consistent kernel oops on startup in grundig_29504_401_tuner_set_params from budget.c. As you might expect, following this failure, the card doesn't work. I'm not a kernel developer, nevertheless I seem to have managed to track this down to a non-existent initialisation of budget->dvb_frontend->tuner_priv. The attached patch fixes the problem for me (and I've managed to tune the card successfully as a result), but I don't know of anyone else using the driver so I can't test it on other people. Please let me know if this works for you or if I've done something terribly wrong ;-( BUG: unable to handle kernel paging request at ffffffff IP: [] :budget:grundig_29504_401_tuner_set_params+0x3b/0xf8 *pde = 007e0067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: bridge stp bnep rfcomm l2cap asb100 hwmon_vid hwmon fuse ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 loop dm_multipath scsi_dh ppdev snd_cmipci gameport snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss l64781 snd_pcm snd_page_alloc snd_opl3_lib snd_timer parport_pc snd_hwdep parport btusb snd_mpu401_uart budget budget_core snd_rawmidi bluetooth saa7146 snd_seq_device ttpci_eeprom snd soundcore sr_mod i2c_sis96x cdrom dvb_core sis900 i2c_core floppy pcspkr mii sata_sil sg dm_snapshot dm_zero dm_mirror dm_log dm_mod pata_sis ata_generic pata_acpi libata sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] Pid: 2319, comm: kdvb-fe-0 Not tainted (2.6.27.9-73.fc9.i686 #1) EIP: 0060:[] EFLAGS: 00010286 CPU: 0 EIP is at grundig_29504_401_tuner_set_params+0x3b/0xf8 [budget] EAX: f6417f00 EBX: f6f53808 ECX: 00000000 EDX: ffffffff ESI: f6f94404 EDI: f6417f00 EBP: f6417f10 ESP: f6417ef0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kdvb-fe-0 (pid: 2319, ti=f6417000 task=f642b2c0 task.ti=f6417000) Stack: f6e39800 00000000 00000004 f6417f00 c064523c f6f53808 f6f53800 f6f94404 f6417f54 f8b2e45a f6417f24 00000286 f6417f4c f6417f38 00000000 00000286 f6417f3c c064520f f642b2c0 f6417f6c c064456f 00000001 f6f94400 00000001 Call Trace: [] ? _spin_lock_irqsave+0x29/0x30 [] ? apply_frontend_param+0x27/0x357 [l64781] [] ? _spin_lock_irq+0x1c/0x20 [] ? __down_common+0x91/0xbf [] ? dvb_frontend_swzigzag_autotune+0x17d/0x1a4 [dvb_core] [] ? dvb_frontend_swzigzag+0x1ac/0x209 [dvb_core] [] ? dvb_frontend_thread+0x2eb/0x3b3 [dvb_core] [] ? autoremove_wake_function+0x0/0x33 [] ? dvb_frontend_thread+0x0/0x3b3 [dvb_core] [] ? kthread+0x3b/0x61 [] ? kthread+0x0/0x61 [] ? kernel_thread_helper+0x7/0x10 ======================= Code: ec 14 8b 80 00 02 00 00 8b 93 08 02 00 00 8d 7d e4 8b 40 20 89 45 e0 31 c0 85 d2 f3 ab 8d 45 f0 66 c7 45 e8 04 00 89 45 ec 74 09 <0f> b6 02 66 89 45 e4 eb 06 66 c7 45 e4 61 00 8b 0e be 0a 8b 02 EIP: [] grundig_29504_401_tuner_set_params+0x3b/0xf8 [budget] SS:ESP 0068:f6417ef0 Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/budget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 1638e1d9f538..83e9e7750c8c 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -470,6 +470,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + budget->dvb_frontend->tuner_priv = NULL; break; } break; -- cgit v1.2.3 From ba3ed4c57fde2df1a8a5b0c445ae5d685334e5f9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 18 Jan 2009 15:08:33 -0300 Subject: V4L/DVB (10270): saa7146: fix unbalanced mutex_lock/unlock The default case of the switch didn't unlock the mutex. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_video.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 6098b626811f..47fee05eaefb 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -576,6 +576,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c) vv->vflip = c->value; break; default: { + mutex_unlock(&dev->lock); return -EINVAL; } } -- cgit v1.2.3 From f0830ebec9993e76b6280e3abb93ceab57b2c923 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 13 Jan 2009 13:08:29 -0300 Subject: V4L/DVB (10287): af9015: fix second FE Bug causes 2nd FE MPEG TS buffer size to be zero and therefore no picture when 2nd FE was enabled. Configure correct buffer size also for 2nd FE. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index e1e9aa5c6b84..dbeaf79defd8 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -835,18 +835,19 @@ static int af9015_read_config(struct usb_device *udev) if (!dvb_usb_af9015_dual_mode) af9015_config.dual_mode = 0; - /* set buffer size according to USB port speed */ + /* Set adapter0 buffer size according to USB port speed, adapter1 buffer + size can be static because it is enabled only USB2.0 */ for (i = 0; i < af9015_properties_count; i++) { /* USB1.1 set smaller buffersize and disable 2nd adapter */ if (udev->speed == USB_SPEED_FULL) { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB11_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB11_MAX_PACKET_SIZE; /* disable 2nd adapter because we don't have PID-filters */ af9015_config.dual_mode = 0; } else { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB20_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB20_MAX_PACKET_SIZE; } } @@ -1254,6 +1255,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, @@ -1353,6 +1360,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, -- cgit v1.2.3 From d1a470fbd987b28e64287718917faf8caf67a055 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 20 Jan 2009 14:56:20 -0300 Subject: V4L/DVB (10288): af9015: bug fix: stick does not work always when plugged First control messages to the stick timeouts very often due to probable hw bug. Repeat first message few times if it fails as workaround. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index dbeaf79defd8..6a97a40d3dfb 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -694,7 +694,12 @@ static int af9015_read_config(struct usb_device *udev) /* IR remote controller */ req.addr = AF9015_EEPROM_IR_MODE; - ret = af9015_rw_udev(udev, &req); + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_rw_udev(udev, &req); + if (!ret) + break; + } if (ret) goto error; deb_info("%s: IR mode:%d\n", __func__, val); -- cgit v1.2.3 From 6d9f13c47a009ccbaf40c2e388ab349690dd8000 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 27 Jan 2009 06:20:34 -0300 Subject: V4L/DVB (10314): cx25840: ignore TUNER_SET_CONFIG in the command callback. These days TUNER_SET_CONFIG is broadcast to the other i2c devices and that triggers a fw load on the cx25840. Ignore this command since cx25840 isn't a tuner and you really do not want to load the firmware that early. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index b3b5b17dc8e7..25eb3bec9e5d 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1383,7 +1383,7 @@ static int cx25840_log_status(struct v4l2_subdev *sd) static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg) { /* ignore this command */ - if (cmd == TUNER_SET_TYPE_ADDR) + if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG) return 0; /* Old-style drivers rely on initialization on first use, so -- cgit v1.2.3 From 7f03a5856c1c32ddc7b6b7a31bd43a4ab8e29f90 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Sun, 25 Jan 2009 20:07:28 -0300 Subject: V4L/DVB (10317): radio-mr800: fix radio->muted and radio->stereo Move radio->muted and radio->stereo in section where radio mutex is locked to avoid possible race condition problems or access to memory. Thanks to David Ellingsworth for pointing to this weak place in driver. Signed-off-by: Alexey Klimov Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-mr800.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 0747dc8862b0..fdfc7bf86b9e 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -194,10 +194,10 @@ static int amradio_start(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 0; + mutex_unlock(&radio->lock); + return retval; } @@ -230,10 +230,10 @@ static int amradio_stop(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 1; + mutex_unlock(&radio->lock); + return retval; } @@ -284,10 +284,10 @@ static int amradio_setfreq(struct amradio_device *radio, int freq) return retval; } - mutex_unlock(&radio->lock); - radio->stereo = 0; + mutex_unlock(&radio->lock); + return retval; } -- cgit v1.2.3 From 9c06210b89e604aa75314d3d173a93292b0d2777 Mon Sep 17 00:00:00 2001 From: Robert Krakora Date: Sun, 25 Jan 2009 13:08:07 -0300 Subject: V4L/DVB (10325): em28xx: Fix for fail to submit URB with IRQs and Pre-emption Disabled Trace: (Provided by Douglas) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:558 in_atomic():0, irqs_disabled():1 Pid: 4918, comm: sox Not tainted 2.6.27.5 #1 [] __might_sleep+0xc6/0xcb [] usb_kill_urb+0x1a/0xd8 [] ? __kmalloc+0x9b/0xfc [] ? __kmalloc+0xb8/0xfc [] ? usb_alloc_urb+0xf/0x31 [] em28xx_isoc_audio_deinit+0x2f/0x6c [em28xx_alsa] [] em28xx_cmd+0x1aa/0x1c5 [em28xx_alsa] [] snd_em28xx_capture_trigger+0x53/0x68 [em28xx_alsa] [] snd_pcm_do_start+0x1c/0x23 [snd_pcm] [] snd_pcm_action_single+0x25/0x4b [snd_pcm] [] snd_pcm_action+0x6a/0x76 [snd_pcm] [] snd_pcm_start+0x14/0x16 [snd_pcm] [] snd_pcm_lib_read1+0x66/0x273 [snd_pcm] [] ? snd_pcm_kernel_ioctl+0x46/0x5f [snd_pcm] [] snd_pcm_lib_read+0xbf/0xcd [snd_pcm] [] ? snd_pcm_lib_read_transfer+0x0/0xaf [snd_pcm] [] snd_pcm_oss_read3+0x99/0xdc [snd_pcm_oss] [] snd_pcm_oss_read2+0xa3/0xbf [snd_pcm_oss] [] ? _cond_resched+0x8/0x32 [] snd_pcm_oss_read+0x106/0x150 [snd_pcm_oss] [] ? snd_pcm_oss_read+0x0/0x150 [snd_pcm_oss] [] vfs_read+0x81/0xdc [] sys_read+0x3b/0x60 [] sysenter_do_call+0x12/0x34 ======================= The culprit in the trace is snd_pcm_action() which invokes a spin lock which disables pre-emption which disables an IRQ which causes the __might_sleep() function to fail the irqs_disabled() test. Since pre-emption is enabled then it is safe to de-allocate the memory if you first unlink each URB. In this instance you are safe since pre-emption is disabled. If pre-emption and irqs are not disabled then call usb_kill_urb(), else call usb_unlink_urb(). Thanks to Douglas for tracking down this bug originally!!! [dougsland@redhat.com: Fixed codyingstyle] Signed-off-by: Robert Krakora Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 9 ++++++--- drivers/media/video/em28xx/em28xx-core.c | 7 +++++-- 2 files changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index fcc300c93995..5d882a44e3ee 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,12 +62,15 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_kill_urb(dev->adev.urb[i]); + if (!irqs_disabled()) + usb_kill_urb(dev->adev.urb[i]); + else + usb_unlink_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; - kfree(dev->adev.transfer_buffer[i]); - dev->adev.transfer_buffer[i] = NULL; + kfree(dev->adev.transfer_buffer[i]); + dev->adev.transfer_buffer[i] = NULL; } return 0; diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 71ad35192c06..94fb1b639a2e 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -860,8 +860,11 @@ void em28xx_uninit_isoc(struct em28xx *dev) for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = dev->isoc_ctl.urb[i]; if (urb) { - usb_kill_urb(urb); - usb_unlink_urb(urb); + if (!irqs_disabled()) + usb_kill_urb(urb); + else + usb_unlink_urb(urb); + if (dev->isoc_ctl.transfer_buffer[i]) { usb_buffer_free(dev->udev, urb->transfer_buffer_length, -- cgit v1.2.3 From 2fd9c2eac31d8b3c1b719c7dfbbfed17c5cbccc4 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 24 Jan 2009 07:45:14 -0300 Subject: V4L/DVB (10385): gspca - main: Fix memory leak when USB disconnection while streaming. Resetting the streaming flag on disconnection prevented the URBs to be freed when streaming was active. Also, USBs cannot be killed after disconnection (oops in [usbcore] unlink1). Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 5e36b9a4ae3e..2ed24527ecd6 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -423,7 +423,8 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) break; gspca_dev->urb[i] = NULL; - usb_kill_urb(urb); + if (!gspca_dev->present) + usb_kill_urb(urb); if (urb->transfer_buffer != NULL) usb_buffer_free(gspca_dev->dev, urb->transfer_buffer_length, @@ -1950,7 +1951,6 @@ void gspca_disconnect(struct usb_interface *intf) struct gspca_dev *gspca_dev = usb_get_intfdata(intf); gspca_dev->present = 0; - gspca_dev->streaming = 0; usb_set_intfdata(intf, NULL); -- cgit v1.2.3 From 2c1a3c979ce66e3073c1b87373c0c01a95f847e6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 Jan 2009 18:10:43 -0300 Subject: V4L/DVB (10229): ivtv: fix memory leak Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index e8e5921cdc34..c46c990987f9 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -949,8 +949,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev, itv->instance = atomic_inc_return(&ivtv_instance) - 1; retval = v4l2_device_register(&dev->dev, &itv->device); - if (retval) + if (retval) { + kfree(itv); return retval; + } /* "ivtv + PCI ID" is a bit of a mouthful, so use "ivtv + instance" instead. */ snprintf(itv->device.name, sizeof(itv->device.name), -- cgit v1.2.3 From 618b2c8db24522ae273d8299c6a936ea13793c4d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 28 Jan 2009 16:50:20 -0800 Subject: xen: make sysfs files behave as their names suggest 1: make "target_kb" only accept and produce a memory size in kilobytes. 2: add a second "target" file which produces output in bytes, and will accept memparse input (scaled bytes) This fixes the rather irritating problem that writing the same value read back into target_kb would end up shrinking the domain by a factor of 1024, with generally bad results. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: "dan.magenheimer@oracle.com" Signed-off-by: Ingo Molnar --- drivers/xen/balloon.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2ba8f95516a0..efa4b363ce72 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -498,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - target_bytes = memparse(buf, &endchar); + target_bytes = simple_strtoull(buf, &endchar, 0) * 1024; balloon_set_new_target(target_bytes >> PAGE_SHIFT); @@ -508,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev, static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR, show_target_kb, store_target_kb); + +static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr, + char *buf) +{ + return sprintf(buf, "%llu\n", + (u64)balloon_stats.target_pages << PAGE_SHIFT); +} + +static ssize_t store_target(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, + size_t count) +{ + char *endchar; + unsigned long long target_bytes; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + target_bytes = memparse(buf, &endchar); + + balloon_set_new_target(target_bytes >> PAGE_SHIFT); + + return count; +} + +static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR, + show_target, store_target); + + static struct sysdev_attribute *balloon_attrs[] = { &attr_target_kb, + &attr_target, }; static struct attribute *balloon_info_attrs[] = { -- cgit v1.2.3 From c8c4707cf7ca8ff7dcc1653447e48cb3de0bf114 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 29 Jan 2009 00:11:59 +0100 Subject: firewire: sbp2: add workarounds for 2nd and 3rd generation iPods According to https://bugs.launchpad.net/bugs/294391 - 3rd generation iPods need the "fix capacity" workaround after all (apparently they crash after the last sector was accessed), - 2nd generation iPods need the "128 kB maximum request size" workaround. Alas both iPod generations feature the same model ID in the config ROM, hence we can only define a shared quirks list entry for them. Luckily the fix capacity workaround did not show a negative effect in Jarod's tests with 2nd gen. iPod. A side note: Apple computers in target mode (or at least an x86 Mac mini) don't have firmware_version and model_id, hence none of the iPod quirks list entries is active for them. Tested-by: Jarod Wilson Acked-by: Jarod Wilson Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 6635925a3758..c71c4419d9e8 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -360,15 +360,17 @@ static const struct { .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, - /* - * There are iPods (2nd gen, 3rd gen) with model_id == 0, but - * these iPods do not feature the read_capacity bug according - * to one report. Read_capacity behaviour as well as model_id - * could change due to Apple-supplied firmware updates though. + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround */ - - /* iPod 4th generation. */ { + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, -- cgit v1.2.3 From 1448d7c6a2ff96d3b52ecae49e2d0f046a097fe0 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 29 Jan 2009 00:13:20 +0100 Subject: ieee1394: sbp2: add workarounds for 2nd and 3rd generation iPods as per https://bugs.launchpad.net/bugs/294391. These got one sample of each iPod generation going. However there still occurred I/O stalls with the 3rd generation iPod which remain undiagnosed at the time of this writing. Acked-by: Jarod Wilson Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index fb8f9f4430ad..f3fd8657ce4b 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -395,6 +395,16 @@ static const struct { .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround + */ + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, -- cgit v1.2.3 From 72410af921cbc9018da388ca1ddf75880a033ac1 Mon Sep 17 00:00:00 2001 From: Atsushi SAKAI Date: Fri, 16 Jan 2009 20:39:14 +0900 Subject: lguest: typos fix 3 points lguest_asm.S => i386_head.S LHCALL_BREAK => LHREQ_BREAK perferred => preferred Signed-off-by: Atsushi SAKAI Signed-off-by: Rusty Russell --- arch/x86/lguest/boot.c | 4 ++-- drivers/lguest/core.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a7ed208f81e3..92f1c6f3e19d 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -931,7 +931,7 @@ static void lguest_restart(char *reason) * that we can fit comfortably. * * First we need assembly templates of each of the patchable Guest operations, - * and these are in lguest_asm.S. */ + * and these are in i386_head.S. */ /*G:060 We construct a table from the assembler templates: */ static const struct lguest_insns @@ -1093,7 +1093,7 @@ __init void lguest_init(void) acpi_ht = 0; #endif - /* We set the perferred console to "hvc". This is the "hypervisor + /* We set the preferred console to "hvc". This is the "hypervisor * virtual console" driver written by the PowerPC people, which we also * adapted for lguest's use. */ add_preferred_console("hvc", 0, NULL); diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 90663e01a56e..60156dfdc608 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) break; /* If the Guest asked to be stopped, we sleep. The Guest's - * clock timer or LHCALL_BREAK from the Waker will wake us. */ + * clock timer or LHREQ_BREAK from the Waker will wake us. */ if (cpu->halted) { set_current_state(TASK_INTERRUPTIBLE); schedule(); -- cgit v1.2.3 From 05dfdbbd678ea2b642db73f48b75667a23d15484 Mon Sep 17 00:00:00 2001 From: Mark Wallis Date: Mon, 26 Jan 2009 17:32:35 +1100 Subject: lguest: Fix a memory leak with the lg object during launcher close Fix a memory leak identified by Rusty Russell during LCA09 by kfree'ing the lg object instead of just clearing it when the launcher closes. Signed-off-by: Mark Wallis Signed-off-by: Rusty Russell --- drivers/lguest/lguest_user.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 34bc017b8b3c..b8ee103eed5f 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file) * kmalloc()ed string, either of which is ok to hand to kfree(). */ if (!IS_ERR(lg->dead)) kfree(lg->dead); - /* We clear the entire structure, which also marks it as free for the - * next user. */ - memset(lg, 0, sizeof(*lg)); + /* Free the memory allocated to the lguest_struct */ + kfree(lg); /* Release lock and exit. */ mutex_unlock(&lguest_lock); -- cgit v1.2.3 From 69b3bb65fa97a1e8563518dbbc35cd57beefb2d4 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 29 Jan 2009 14:25:06 -0800 Subject: sgi-xpc: ensure flags are updated before bte_copy The clearing of the msg->flags needs a barrier between it and the notify of the channel threads that the messages are cleaned and ready for use. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_sn2.c | 9 +++++---- drivers/misc/sgi-xp/xpc_uv.c | 2 +- 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 82fb9958f22f..7aafb8a91945 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1836,6 +1836,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) */ xpc_clear_remote_msgqueue_flags_sn2(ch); + smp_wmb(); /* ensure flags have been cleared before bte_copy */ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " @@ -1934,7 +1935,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) break; get = ch_sn2->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ + smp_rmb(); /* guarantee that .get loads before .put */ if (get == ch_sn2->w_remote_GP.put) break; @@ -2053,7 +2054,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, while (1) { put = ch_sn2->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ + smp_rmb(); /* guarantee that .put loads before .get */ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { /* There are available message entries. We need to try @@ -2186,7 +2187,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, * The preceding store of msg->flags must occur before the following * load of local_GP->put. */ - mb(); + smp_mb(); /* see if the message is next in line to be sent, if so send it */ @@ -2287,7 +2288,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) * The preceding store of msg->flags must occur before the following * load of local_GP->get. */ - mb(); + smp_mb(); /* * See if this message is next in line to be acknowledged as having diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 91a55b1b1037..f17f7d40ea2c 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -1423,7 +1423,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, atomic_inc(&ch->n_to_notify); msg_slot->key = key; - wmb(); /* a non-NULL func must hit memory after the key */ + smp_wmb(); /* a non-NULL func must hit memory after the key */ msg_slot->func = func; if (ch->flags & XPC_C_DISCONNECTING) { -- cgit v1.2.3 From 17e2161654da4e6bdfd8d53d4f52e820ee93f423 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 29 Jan 2009 14:25:07 -0800 Subject: sgi-xpc: Remove NULL pointer dereference. If the bte copy fails, the attempt to retrieve payloads merely returns a null pointer deref and not NULL as was expected. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_sn2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 7aafb8a91945..7d05fb5f4fee 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1957,11 +1957,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) msg = xpc_pull_remote_msg_sn2(ch, get); - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + if (msg != NULL) { + DBUG_ON(msg->number != get); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); - payload = &msg->payload; + payload = &msg->payload; + } break; } -- cgit v1.2.3 From 252523ef2421b803de4810876223e4d695f23ec6 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 29 Jan 2009 14:25:07 -0800 Subject: sgi-xpc: fix up stale DBUG_ON statements Clean up the stale DBUG_ON checks and add a couple new ones. Signed-off-by: Robin Holt Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_channel.c | 3 --- drivers/misc/sgi-xp/xpc_sn2.c | 15 +++++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9cd2ebe2a3b6..45fd653dbe31 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - - DBUG_ON(ch->local_msgqueue == NULL); - DBUG_ON(ch->remote_msgqueue == NULL); } if (!(ch->flags & XPC_C_OPENREPLY)) { diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 7d05fb5f4fee..2e975762c32b 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void) int n_IRQs_expected; int n_IRQs_detected; - DBUG_ON(xpc_activate_IRQ_rcvd == 0); - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); n_IRQs_expected = xpc_activate_IRQ_rcvd; xpc_activate_IRQ_rcvd = 0; @@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + (get % ch->local_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); msg->flags = 0; } while (++get < ch_sn2->remote_GP.get); } @@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) struct xpc_msg_sn2 *msg; s64 put; - put = ch_sn2->w_remote_GP.put; + /* flags are zeroed when the buffer is allocated */ + if (ch_sn2->remote_GP.put < ch->remote_nentries) + return; + + put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries); do { msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + (put % ch->remote_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); + DBUG_ON(!(msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg->number != put - ch->remote_nentries); msg->flags = 0; } while (++put < ch_sn2->remote_GP.put); } @@ -2280,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", (void *)msg, msg_number, ch->partid, ch->number); - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != + DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) != msg_number % ch->remote_nentries); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); DBUG_ON(msg->flags & XPC_M_SN2_DONE); msg->flags |= XPC_M_SN2_DONE; -- cgit v1.2.3 From 7460db567bbca76bf087d1694d792a1a96bdaa26 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 29 Jan 2009 14:25:12 -0800 Subject: gpiolib: fix request related issue Fix request-already-requested handling in gpio_request(). Signed-off-by: Magnus Damm Acked-by: David Brownell Cc: [2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 35e7aea4222c..42fb2fd24c0c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label) } else { status = -EBUSY; module_put(chip->owner); + goto done; } if (chip->request) { -- cgit v1.2.3 From 6989d5651a16b49908069b514329d5114217ea0e Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 29 Jan 2009 14:25:14 -0800 Subject: hp-wmi: fix regressions caused by missing if statement Error was introduced in commit fe8e4e039dc3 ("hp-wmi: handle rfkill_register() failure"). Signed-off-by: Frans Pop Acked-by: Larry Finger Acked-by: Matthew Garrett Cc: Matthew Garrett Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/hp-wmi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 7c789f0a94d7..626042066be4 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -441,6 +441,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; bluetooth_rfkill->user_claim_unsupported = 1; err = rfkill_register(bluetooth_rfkill); + if (err) goto register_bluetooth_error; } -- cgit v1.2.3 From 248ae0d43fe7f951352eedfff36572d4b75ce963 Mon Sep 17 00:00:00 2001 From: Alex Buell Date: Thu, 29 Jan 2009 14:25:16 -0800 Subject: fbdev: incorrect URL given in drivers/video/Kconfig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c94f71980c1b..f0267706cb45 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -41,7 +41,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read and the Framebuffer-HOWTO at - for more + for more information. Say Y here and to the driver for your graphics board below if you -- cgit v1.2.3 From c189f4ec955e1fe4a2a2742d028aeecc52a5848a Mon Sep 17 00:00:00 2001 From: David Altobelli Date: Thu, 29 Jan 2009 14:25:23 -0800 Subject: hpilo: increment version Bump hpilo module version to indicate that the open/close bug is fixed. Signed-off-by: David Altobelli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/hpilo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 05e298289238..10c421b73eaf 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -758,7 +758,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.05"); +MODULE_VERSION("0.06"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli "); -- cgit v1.2.3 From fb9f88e1dc76f9feb39d39c40a5d61aad6df4388 Mon Sep 17 00:00:00 2001 From: Bharath Ramesh Date: Thu, 29 Jan 2009 14:25:24 -0800 Subject: hwmon: applesmc: add support for MacPro 3 temperature sensors MacPro 3 have more temperature sensors than the previous MacPro's also the sensor THTG has been removed. This patch add supports for the newer temperature sensors in the MacPro3. Signed-off-by: Bharath Ramesh Signed-off-by: Henrik Rydberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index e30186236588..678e34b01e52 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -83,7 +83,7 @@ /* * Temperature sensors keys (sp78 - 2 bytes). */ -static const char* temperature_sensors_sets[][36] = { +static const char *temperature_sensors_sets[][41] = { /* Set 0: Macbook Pro */ { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, @@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = { { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0", "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P", "Ts0S", NULL }, +/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */ + { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", + "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P", + "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P", + "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S", + "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S", + NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO, applesmc_show_temperature, NULL, 33); static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO, applesmc_show_temperature, NULL, 34); +static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO, + applesmc_show_temperature, NULL, 35); +static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO, + applesmc_show_temperature, NULL, 36); +static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO, + applesmc_show_temperature, NULL, 37); +static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO, + applesmc_show_temperature, NULL, 38); +static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO, + applesmc_show_temperature, NULL, 39); static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, @@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp33_input.dev_attr.attr, &sensor_dev_attr_temp34_input.dev_attr.attr, &sensor_dev_attr_temp35_input.dev_attr.attr, + &sensor_dev_attr_temp36_input.dev_attr.attr, + &sensor_dev_attr_temp37_input.dev_attr.attr, + &sensor_dev_attr_temp38_input.dev_attr.attr, + &sensor_dev_attr_temp39_input.dev_attr.attr, + &sensor_dev_attr_temp40_input.dev_attr.attr, NULL }; @@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 14 }, /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */ { .accelerometer = 1, .light = 1, .temperature_set = 15 }, +/* MacPro3,1: temperature set 16 */ + { .accelerometer = 0, .light = 0, .temperature_set = 16 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro3", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") }, + &applesmc_dmi_data[16]}, { applesmc_dmi_match, "Apple MacPro", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, -- cgit v1.2.3 From 3095eb87bb36ae880608fe3fc46cfd59ced1f319 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 29 Jan 2009 14:25:25 -0800 Subject: hp-wmi: set initial docking state If the initial state is not set when the input device is set up, the first docking event after the module is loaded will be lost. Signed-off-by: Frans Pop Acked-by: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/hp-wmi.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 626042066be4..de91ddab0a86 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void) case KE_SW: set_bit(EV_SW, hp_wmi_input_dev->evbit); set_bit(key->keycode, hp_wmi_input_dev->swbit); + + /* Set initial dock state */ + input_report_switch(hp_wmi_input_dev, key->keycode, + hp_wmi_dock_state()); + input_sync(hp_wmi_input_dev); break; } } -- cgit v1.2.3 From 726a6699267e36c66043a55b13dfeec3d9925452 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 29 Jan 2009 14:25:27 -0800 Subject: drivers/gpu/drm/i915/intel_lvds.c: fix locking snafu s/unlock/lock/ Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12575 Reported-by: Daniel Vetter Cc: Dave Airlie Acked-by: Jesse Barnes Cc: Eric Anholt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6b1148fc2cbe..b36a5214d8df 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -311,7 +311,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector) if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; - mutex_unlock(&dev->mode_config.mutex); + mutex_lock(&dev->mode_config.mutex); mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); mutex_unlock(&dev->mode_config.mutex); -- cgit v1.2.3 From 5872fb94f85d2e4fdef94657bd14e1a492df9825 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 29 Jan 2009 16:28:02 -0800 Subject: Documentation: move DMA-mapping.txt to Doc/PCI/ Move DMA-mapping.txt to Documentation/PCI/. DMA-mapping.txt was supposed to be moved from Documentation/ to Documentation/PCI/. The 00-INDEX files in those two directories were updated, along with a few other text files, but the file itself somehow escaped being moved, so move it and update more text files and source files with its new location. Signed-off-by: Randy Dunlap Acked-by: Greg Kroah-Hartman cc: Jesse Barnes Signed-off-by: Linus Torvalds --- Documentation/DMA-API.txt | 2 +- Documentation/IO-mapping.txt | 4 ++-- Documentation/block/biodoc.txt | 5 +++-- Documentation/usb/dma.txt | 11 ++++++----- arch/ia64/hp/common/sba_iommu.c | 12 ++++++------ arch/parisc/include/asm/dma-mapping.h | 2 +- arch/parisc/kernel/pci-dma.c | 2 +- arch/x86/include/asm/dma-mapping.h | 4 ++-- arch/x86/kernel/pci-gart_64.c | 2 +- drivers/parisc/sba_iommu.c | 18 +++++++++--------- drivers/staging/altpciechdma/altpciechdma.c | 4 ++-- include/media/videobuf-dma-sg.h | 2 +- 12 files changed, 35 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 52441694fe03..2a3fcc55e981 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -5,7 +5,7 @@ This document describes the DMA API. For a more gentle introduction phrased in terms of the pci_ equivalents (and actual examples) see -DMA-mapping.txt +Documentation/PCI/PCI-DMA-mapping.txt. This API is split into two pieces. Part I describes the API and the corresponding pci_ API. Part II describes the extensions to the API diff --git a/Documentation/IO-mapping.txt b/Documentation/IO-mapping.txt index 86edb61bdee6..78a440695e11 100644 --- a/Documentation/IO-mapping.txt +++ b/Documentation/IO-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been - superseded by the functionality provided by the PCI DMA - interface (see Documentation/DMA-mapping.txt). They continue + superseded by the functionality provided by the PCI DMA interface + (see Documentation/PCI/PCI-DMA-mapping.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 3c5434c83daf..5d2480d33b43 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,8 +186,9 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to DMA-mapping.txt for a discussion on PCI high mem DMA -aspects and mapping of scatter gather lists, and support for 64 bit PCI. +Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +on PCI high mem DMA aspects and mapping of scatter gather lists, and support +for 64 bit PCI. Special handling is required only for cases where i/o needs to happen on pages at physical memory addresses beyond what the device can support. In these diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index e8b50b7de9d9..cfdcd16e3abf 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -6,8 +6,9 @@ in the kernel usb programming guide (kerneldoc, from the source code). API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, -though they still must provide DMA-ready buffers (see DMA-mapping.txt). -That's how they've worked through the 2.4 (and earlier) kernels. +though they still must provide DMA-ready buffers (see +Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through +the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -62,8 +63,8 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/DMA-mapping.txt for definitions of "coherent" and "streaming" - DMA mappings.) + Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and + "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably space-efficient. @@ -93,7 +94,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of DMA-mapping.txt, titled "What memory is DMA-able?") +of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index d98f0f4ff83f..6d5e6c5630e3 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -906,7 +906,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ dma_addr_t sba_map_single_attrs(struct device *dev, void *addr, size_t size, int dir, @@ -1024,7 +1024,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, int dir, struct dma_attrs *attrs) @@ -1102,7 +1102,7 @@ EXPORT_SYMBOL(sba_unmap_single_attrs); * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void * sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) @@ -1165,7 +1165,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { @@ -1420,7 +1420,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, int dir, struct dma_attrs *attrs) @@ -1512,7 +1512,7 @@ EXPORT_SYMBOL(sba_map_sg_attrs); * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, int dir, struct dma_attrs *attrs) diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 53af696f23d2..da6943380908 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include #include -/* See Documentation/DMA-mapping.txt */ +/* See Documentation/PCI/PCI-DMA-mapping.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index ccd61b9567a6..df47895db828 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -2,7 +2,7 @@ ** PARISC 1.1 Dynamic DMA mapping support. ** This implementation is for PA-RISC platforms that do not support ** I/O TLBs (aka DMA address translation hardware). -** See Documentation/DMA-mapping.txt for interface definitions. +** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions. ** ** (c) Copyright 1999,2000 Hewlett-Packard Company ** (c) Copyright 2000 Grant Grundler diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 4035357f5b9d..132a134d12f2 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -2,8 +2,8 @@ #define _ASM_X86_DMA_MAPPING_H /* - * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for - * documentation. + * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and + * Documentation/DMA-API.txt for documentation. */ #include diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 00c2bcd41463..d5768b1af080 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -5,7 +5,7 @@ * This allows to use PCI devices that only support 32bit addresses on systems * with more than 4GB. * - * See Documentation/DMA-mapping.txt for the interface specification. + * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification. * * Copyright 2002 Andi Kleen, SuSE Labs. * Subject to the GNU General Public License v2 only. diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 3fac8f81d59d..a70cf16ee1ad 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, - * then fall back to 32-bit if that fails. + /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. */ @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c index 8e2b4ca0651d..f516140ca976 100644 --- a/drivers/staging/altpciechdma/altpciechdma.c +++ b/drivers/staging/altpciechdma/altpciechdma.c @@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev) goto fail; /* allocate and map coherently-cached memory for a DMA-able buffer */ - /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */ buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus); if (!buffer_virt) { printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n"); @@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id) #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!) /* query for DMA transfer */ - /* @see Documentation/DMA-mapping.txt */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt */ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) { pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK); /* use 64-bit DMA */ diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 90edd22d343c..dda47f0082e9 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -49,7 +49,7 @@ struct scatterlist* videobuf_pages_to_sg(struct page **pages, int nr_pages, * does memory allocation too using vmalloc_32(). * * videobuf_dma_*() - * see Documentation/DMA-mapping.txt, these functions to + * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to * basically the same. The map function does also build a * scatterlist for the buffer (and unmap frees it ...) * -- cgit v1.2.3 From 1737ef7598d3515fdc11cb9ba7e054f334404e04 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 29 Jan 2009 02:30:56 +0300 Subject: sata_sil: Fix build breakage Commit e57db7b (SATA Sil: Blacklist system that spins off disks during ACPI power off) breaks build like the following, in both cases when CONFIG_DMI set or not. drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff': drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match' drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast sata_sil.c should include dmi.h Signed-off-by: Alexander Beregalov Signed-off-by: Linus Torvalds --- drivers/ata/sata_sil.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index bfd55b085ae6..9f029595f454 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -44,6 +44,7 @@ #include #include #include +#include #define DRV_NAME "sata_sil" #define DRV_VERSION "2.4" -- cgit v1.2.3 From 0461ec5bc7745b89a8ab67ba0ea497abd58a6301 Mon Sep 17 00:00:00 2001 From: Paul Larson Date: Fri, 30 Jan 2009 10:21:49 -0600 Subject: Add enable_ms to jsm driver This fixes a crash observed when non-existant enable_ms function is called for jsm driver. Signed-off-by: Scott Kilau Signed-off-by: Paul Larson Signed-off-by: Linus Torvalds --- drivers/serial/jsm/jsm_tty.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 3547558d2caf..324c74d2f666 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port) channel->ch_bd->bd_ops->disable_receiver(channel); } +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + static void jsm_tty_break(struct uart_port *port, int break_state) { unsigned long lock_flags; @@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = { .start_tx = jsm_tty_start_tx, .send_xchar = jsm_tty_send_xchar, .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, .break_ctl = jsm_tty_break, .startup = jsm_tty_open, .shutdown = jsm_tty_close, -- cgit v1.2.3 From 9bf503e6bec3f2d28298808454eebde031ab5b5b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 14:32:27 +0100 Subject: regulator: move bq24022 init back to module_init instead of subsys_initcall This workaround was needed when regulator/ was not linked before both power/ and usb/otg/ in drivers/Makefile. Now that it is even linked before mfd/, this patch makes sure that bq24022 isn't probed before the GPIO expander is set up. Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood --- drivers/regulator/bq24022.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 366565aba865..c175e38a4cd5 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -152,11 +152,7 @@ static void __exit bq24022_exit(void) platform_driver_unregister(&bq24022_driver); } -/* - * make sure this is probed before gpio_vbus and pda_power, - * but after asic3 or other GPIO expander drivers. - */ -subsys_initcall(bq24022_init); +module_init(bq24022_init); module_exit(bq24022_exit); MODULE_AUTHOR("Philipp Zabel"); -- cgit v1.2.3 From 8dd2c9e3128a5784a01084b52d5bb7efd4371ac6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 17 Jan 2009 16:06:40 +0100 Subject: leds: Fix bounds checking of wm8350->pmic.led Fix bounds checking of wm8350->pmic.led Signed-off-by: Roel Kluin Signed-off-by: Liam Girdwood --- drivers/regulator/wm8350-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7aa35248181b..5056e23e4414 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, struct platform_device *pdev; int ret; - if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); return -ENODEV; } -- cgit v1.2.3 From bbd98fe48a43464b4a044bc4cbeefad284d6aa80 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 31 Jan 2009 00:52:30 -0800 Subject: igb: Fix DCA errors and do not use context index for 82576 82576 was being incorrectly flagged as needing a context index. It does not as each ring has it's own table of 2 contexts. Driver was registering after registering the driver instead of the other way around. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb.h | 9 ++++----- drivers/net/igb/igb_main.c | 16 ++++++---------- 2 files changed, 10 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 5a27825cc48a..aebef8e48e76 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -300,11 +300,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b82b0fb2056c..cc94412ddf89 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -206,10 +206,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } -- cgit v1.2.3 From ec54d7d6e40b04c16dfce0e41e506198a20c8645 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 31 Jan 2009 00:52:57 -0800 Subject: igb: prevent skb_over panic w/ mtu smaller than 1K A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index cc94412ddf89..a50db5398fa5 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1834,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1864,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; -- cgit v1.2.3 From 5d0932a5dd00d83df5d1e15eeffb6edf015a8579 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 31 Jan 2009 00:53:18 -0800 Subject: igb: fix link reporting when using sgmii When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_82575.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f5e2e7235fcb..13ca73f96ec6 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } -- cgit v1.2.3 From fc8744adc870a8d4366908221508bb113d8b72ee Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 31 Jan 2009 15:08:56 -0800 Subject: Stop playing silly games with the VM_ACCOUNT flag The mmap_region() code would temporarily set the VM_ACCOUNT flag for anonymous shared mappings just to inform shmem_zero_setup() that it should enable accounting for the resulting shm object. It would then clear the flag after calling ->mmap (for the /dev/zero case) or doing shmem_zero_setup() (for the MAP_ANON case). This just resulted in vma merge issues, but also made for just unnecessary confusion. Use the already-existing VM_NORESERVE flag for this instead, and let shmem_{zero|file}_setup() just figure it out from that. This also happens to make it obvious that the new DRI2 GEM layer uses a non-reserving backing store for its object allocation - which is quite possibly not intentional. But since I didn't want to change semantics in this patch, I left it alone, and just updated the caller to use the new flag semantics. Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_gem.c | 2 +- ipc/shm.c | 4 ++-- mm/mmap.c | 48 ++++++++++++++++++++++++----------------------- mm/shmem.c | 2 +- 4 files changed, 29 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 9da581452874..6915fb82d0b0 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); obj->dev = dev; - obj->filp = shmem_file_setup("drm mm object", size, 0); + obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); if (IS_ERR(obj->filp)) { kfree(obj); return NULL; diff --git a/ipc/shm.c b/ipc/shm.c index a9e09ad2263e..c0a021f7f41a 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -368,14 +368,14 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params) file = hugetlb_file_setup(name, size); shp->mlock_user = current_user(); } else { - int acctflag = VM_ACCOUNT; + int acctflag = 0; /* * Do not allow no accounting for OVERCOMMIT_NEVER, even * if it's asked for. */ if ((shmflg & SHM_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER) - acctflag = 0; + acctflag = VM_NORESERVE; file = shmem_file_setup(name, size, acctflag); } error = PTR_ERR(file); diff --git a/mm/mmap.c b/mm/mmap.c index c581df14d0de..214b6a258eeb 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1090,6 +1090,15 @@ int vma_wants_writenotify(struct vm_area_struct *vma) mapping_cap_account_dirty(vma->vm_file->f_mapping); } +/* + * We account for memory if it's a private writeable mapping, + * and VM_NORESERVE wasn't set. + */ +static inline int accountable_mapping(unsigned int vm_flags) +{ + return (vm_flags & (VM_NORESERVE | VM_SHARED | VM_WRITE)) == VM_WRITE; +} + unsigned long mmap_region(struct file *file, unsigned long addr, unsigned long len, unsigned long flags, unsigned int vm_flags, unsigned long pgoff, @@ -1117,23 +1126,24 @@ munmap_back: if (!may_expand_vm(mm, len >> PAGE_SHIFT)) return -ENOMEM; - if (flags & MAP_NORESERVE) + /* + * Set 'VM_NORESERVE' if we should not account for the + * memory use of this mapping. We only honor MAP_NORESERVE + * if we're allowed to overcommit memory. + */ + if ((flags & MAP_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER) + vm_flags |= VM_NORESERVE; + if (!accountable) vm_flags |= VM_NORESERVE; - if (accountable && (!(flags & MAP_NORESERVE) || - sysctl_overcommit_memory == OVERCOMMIT_NEVER)) { - if (vm_flags & VM_SHARED) { - /* Check memory availability in shmem_file_setup? */ - vm_flags |= VM_ACCOUNT; - } else if (vm_flags & VM_WRITE) { - /* - * Private writable mapping: check memory availability - */ - charged = len >> PAGE_SHIFT; - if (security_vm_enough_memory(charged)) - return -ENOMEM; - vm_flags |= VM_ACCOUNT; - } + /* + * Private writable mapping: check memory availability + */ + if (accountable_mapping(vm_flags)) { + charged = len >> PAGE_SHIFT; + if (security_vm_enough_memory(charged)) + return -ENOMEM; + vm_flags |= VM_ACCOUNT; } /* @@ -1184,14 +1194,6 @@ munmap_back: goto free_vma; } - /* We set VM_ACCOUNT in a shared mapping's vm_flags, to inform - * shmem_zero_setup (perhaps called through /dev/zero's ->mmap) - * that memory reservation must be checked; but that reservation - * belongs to shared memory object, not to vma: so now clear it. - */ - if ((vm_flags & (VM_SHARED|VM_ACCOUNT)) == (VM_SHARED|VM_ACCOUNT)) - vma->vm_flags &= ~VM_ACCOUNT; - /* Can addr have changed?? * * Answer: Yes, several device drivers can do it in their diff --git a/mm/shmem.c b/mm/shmem.c index 5d0de96c9789..19d566ccdeea 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2628,7 +2628,7 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) goto close_file; #ifdef CONFIG_SHMEM - SHMEM_I(inode)->flags = flags & VM_ACCOUNT; + SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT; #endif d_instantiate(dentry, inode); inode->i_size = size; -- cgit v1.2.3 From 878b8619f711280fd05845e21956434b5e588cc4 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 30 Jan 2009 15:27:14 -0500 Subject: Fix memory corruption in console selection Fix an off-by-two memory error in console selection. The loop below goes from sel_start to sel_end (inclusive), so it writes one more character. This one more character was added to the allocated size (+1), but it was not multiplied by an UTF-8 multiplier. This patch fixes a memory corruption when UTF-8 console is used and the user selects a few characters, all of them 3-byte in UTF-8 (for example a frame line). When memory redzones are enabled, a redzone corruption is reported. When they are not enabled, trashing of random memory occurs. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds --- drivers/char/selection.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f29fbe9b8ed7..cb8ca5698963 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t /* Allocate a new buffer before freeing the old one ... */ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */ - bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL); + bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL); if (!bp) { printk(KERN_WARNING "selection: kmalloc() failed\n"); clear_selection(); -- cgit v1.2.3 From 40c41c8cf1d04445013a14772afb3903a17344a6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 31 Jan 2009 08:09:33 -0300 Subject: V4L/DVB (10403): saa7134-alsa: saa7130 doesn't support digital audio According with saa7130 public datasheet, saa7130 doesn't support digital audio. This is also confirmed by experimental tests. So, it doesn't make sense to let saa7134-alsa register for those chipsets. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-alsa.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 26194a0ce927..c750d3dd57d2 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -1089,7 +1089,11 @@ static int saa7134_alsa_init(void) list_for_each(list,&saa7134_devlist) { dev = list_entry(list, struct saa7134_dev, devlist); - alsa_device_init(dev); + if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130) + printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n", + dev->name, saa7134_boards[dev->board].name); + else + alsa_device_init(dev); } if (dev == NULL) -- cgit v1.2.3 From 67e70baf043cfdcdaf5972bc94be82632071536b Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 26 Jan 2009 03:07:59 -0300 Subject: V4L/DVB (10411): s5h1409: Perform s5h1409 soft reset after tuning Just like with the s5h1411, the s5h1409 needs a soft-reset in order for it to know that the tuner has been told to change frequencies. This change changes the behavior from "random tuning times between 500ms to complete tuning lock failures" to "tuning lock consistently within 700ms". Thanks to Robert Krakora for doing initial testing of the patch on the KWorld 330U. Thanks to Andy Walls for doing testing of the patch on the HVR-1600. Thanks to Michael Krufky for doing additional testing. Signed-off-by: Devin Heitmueller Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index cf4d8936bb83..3e08d985d6e5 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -545,9 +545,6 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_enable_modulation(fe, p->u.vsb.modulation); - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -562,6 +559,10 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_set_qam_interleave_mode(fe); } + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1409_softreset(fe); + return 0; } -- cgit v1.2.3 From 309ea626b164f2abba8e639b3eb6f2e5d34708b9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 13 Jan 2009 20:09:30 +0000 Subject: powerpc/ps3: Printing fixups for l64 to ll64 convserion drivers/net Signed-off-by: Stephen Rothwell Acked-by: Geoff Levand Acked-by: David S. Miller Signed-off-by: Benjamin Herrenschmidt --- drivers/net/ps3_gelic_wireless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index ec2314246682..335da4831ab3 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl, complete(&wl->assoc_done); netif_carrier_on(port_to_netdev(wl_port(wl))); } else - pr_debug("%s: event %#lx under wpa\n", + pr_debug("%s: event %#llx under wpa\n", __func__, event); } -- cgit v1.2.3 From 7fbb7cadd062baf299fd8b26a80ea99da0c3fe01 Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 13 Jan 2009 20:09:30 +0000 Subject: fbdev/atyfb: Fix DSP config on some PowerMacs & PowerBooks Since the complete re-write in 2.6.10, some PowerMacs (At least PowerMac 5500 and PowerMac G3 Beige rev A) with ATI Mach64 chip have suffered from unstable columns in their framebuffer image. This seems to depend on a value (4) read from PLL_EXT_CNTL register, which leads to incorrect DSP config parameters to be written to the chip. This patch uses a value calculated by aty_init_pll_ct instead, as a starting point. There are questions as to whether this should be extended to other platforms or maybe made dependent on specific chip types, but in the meantime, this has been tested on various powermacs and works for them so let's commit it. Signed-off-by: Risto Suominen Tested-by: Michael Pettersson Cc: Signed-off-by: Benjamin Herrenschmidt --- drivers/video/aty/mach64_ct.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index c50c7cf26fe9..2745b8539485 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -8,6 +8,9 @@ #include #include