From b53893aae441a034bf4dbbad42fe218561d7d81f Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 19 Jul 2016 16:43:26 +0200 Subject: hwmon: (adt7411) set bit 3 in CFG1 register According to the datasheet you should only write 1 to this bit. If it is not set, at least AIN3 will return bad values on newer silicon revisions. Fixes: d84ca5b345c2 ("hwmon: Add driver for ADT7411 voltage and temperature sensor") Signed-off-by: Michael Walle Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7411.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index 827c03703128..a7f886961830 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -30,6 +30,7 @@ #define ADT7411_REG_CFG1 0x18 #define ADT7411_CFG1_START_MONITOR (1 << 0) +#define ADT7411_CFG1_RESERVED_BIT3 (1 << 3) #define ADT7411_REG_CFG2 0x19 #define ADT7411_CFG2_DISABLE_AVG (1 << 5) @@ -296,8 +297,10 @@ static int adt7411_probe(struct i2c_client *client, mutex_init(&data->device_lock); mutex_init(&data->update_lock); + /* According to the datasheet, we must only write 1 to bit 3 */ ret = adt7411_modify_bit(client, ADT7411_REG_CFG1, - ADT7411_CFG1_START_MONITOR, 1); + ADT7411_CFG1_RESERVED_BIT3 + | ADT7411_CFG1_START_MONITOR, 1); if (ret < 0) return ret; -- cgit v1.2.3