From 1c8732bb0355b929b09173464cdca7df4d516f89 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 9 Apr 2014 13:34:39 +0200 Subject: gpio: support threaded interrupts in irqchip helpers Some off-chip GPIO expanders need to be communicated by I2C or SPI traffic, but may still support IRQs. By the sleeping nature of such buses, such IRQ handlers need to be threaded. Support such handlers in the gpiochip irqchip helpers by flagging IRQs as threaded if the .can_sleep property of the gpiochip is true. Helpfully deny registration of chained IRQ handlers if the .can_sleep property is set, as such chips will invariably need a nested handler rather than a chained handler. Cc: Thomas Gleixner Signed-off-by: Linus Walleij --- include/linux/gpio/driver.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 1827b43966d9..573e4f3243d0 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -51,7 +51,10 @@ struct seq_file; * format specifier for an unsigned int. It is substituted by the actual * number of the gpio. * @can_sleep: flag must be set iff get()/set() methods sleep, as they - * must while accessing GPIO expander chips over I2C or SPI + * must while accessing GPIO expander chips over I2C or SPI. This + * implies that if the chip supports IRQs, these IRQs need to be threaded + * as the chip access may sleep when e.g. reading out the IRQ status + * registers. * @exported: flags if the gpiochip is exported for use from sysfs. Private. * * A gpio_chip can help platforms abstract various sources of GPIOs so -- cgit v1.2.3