From f23a478075659db8a4fd62fa6e264a8bb052cc5b Mon Sep 17 00:00:00 2001 From: Arik Nemtsov <arik@wizery.com> Date: Mon, 8 Nov 2010 11:51:06 +0200 Subject: mac80211: support hardware TX fragmentation offload The lower driver is notified when the fragmentation threshold changes and upon a reconfig of the interface. If the driver supports hardware TX fragmentation, don't fragment packets in the stack. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/mac80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9fdf982d1286..6122e8a3297e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1652,6 +1652,11 @@ enum ieee80211_ampdu_mlme_action { * and IV16) for the given key from hardware. * The callback must be atomic. * + * @set_frag_threshold: Configuration of fragmentation threshold. Assign this + * if the device does fragmentation by itself; if this callback is + * implemented then the stack will not do fragmentation. + * The callback can sleep. + * * @set_rts_threshold: Configuration of RTS threshold (if device needs it) * The callback can sleep. * @@ -1765,6 +1770,7 @@ struct ieee80211_ops { struct ieee80211_low_level_stats *stats); void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32, u16 *iv16); + int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta); -- cgit v1.2.3 From afe0cbf87500f0585d217deb8c6fd329793a7957 Mon Sep 17 00:00:00 2001 From: Bruno Randolf <br1@einfach.org> Date: Wed, 10 Nov 2010 12:50:50 +0900 Subject: cfg80211: Add nl80211 antenna configuration Allow setting of TX and RX antennas configuration via nl80211. The antenna configuration is defined as a bitmap of allowed antennas to use. This API can be used to mask out antennas which are not attached or should not be used for other reasons like regulatory concerns or special setups. Separate bitmaps are used for RX and TX to allow configuring different antennas for receiving and transmitting. Each bitmap is 32 bit long, each bit representing one antenna, starting with antenna 1 at the first bit. If an antenna bit is set, this means the driver is allowed to use this antenna for RX or TX respectively; if the bit is not set the hardware is not allowed to use this antenna. Using bitmaps has the benefit of allowing for a flexible configuration interface which can support many different configurations and which can be used for 802.11n as well as non-802.11n devices. Instead of relying on some hardware specific assumptions, drivers can use this information to know which antennas are actually attached to the system and derive their capabilities based on that. 802.11n devices should enable or disable chains, based on which antennas are present (If all antennas belonging to a particular chain are disabled, the entire chain should be disabled). HT capabilities (like STBC, TX Beamforming, Antenna selection) should be calculated based on the available chains after applying the antenna masks. Should a 802.11n device have diversity antennas attached to one of their chains, diversity can be enabled or disabled based on the antenna information. Non-802.11n drivers can use the antenna masks to select RX and TX antennas and to enable or disable antenna diversity. While covering chainmasks for 802.11n and the standard "legacy" modes "fixed antenna 1", "fixed antenna 2" and "diversity" this API also allows more rare, but useful configurations as follows: 1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to have a low gain antenna for TX in order to keep within the regulatory constraints and a high gain antenna for RX in order to receive weaker signals ("speak softly, but listen harder"). This can be useful for building long-shot outdoor links. Another usage of this setup is having a low-noise pre-amplifier on antenna 1 and a power amplifier on the other antenna. This way transmit noise is mostly kept out of the low noise receive channel. (This would be bitmaps: tx 1 rx 2). 2) Another similar setup is: Use RX diversity on both antennas, but always send on antenna 1. Again that would allow us to benefit from a higher gain RX antenna, while staying within the legal limits. (This would be: tx 0 rx 3). 3) And finally there can be special experimental setups in research and development even with pre 802.11n hardware where more than 2 antennas are available. It's good to keep the API simple, yet flexible. Signed-off-by: Bruno Randolf <br1@einfach.org> -- v7: Made bitmasks 32 bit wide and rebased to latest wireless-testing. Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/linux/nl80211.h | 25 +++++++++++++++++++++++++ include/net/cfg80211.h | 3 +++ net/wireless/nl80211.c | 31 ++++++++++++++++++++++++++++++- 3 files changed, 58 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index fb877b5621b7..17c5c8849250 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -804,6 +804,28 @@ enum nl80211_commands { * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly * means support for per-station GTKs. * + * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. + * This can be used to mask out antennas which are not attached or should + * not be used for transmitting. If an antenna is not selected in this + * bitmap the hardware is not allowed to transmit on this antenna. + * + * Each bit represents one antenna, starting with antenna 1 at the first + * bit. Depending on which antennas are selected in the bitmap, 802.11n + * drivers can derive which chainmasks to use (if all antennas belonging to + * a particular chain are disabled this chain should be disabled) and if + * a chain has diversity antennas wether diversity should be used or not. + * HT capabilities (STBC, TX Beamforming, Antenna selection) can be + * derived from the available chains after applying the antenna mask. + * Non-802.11n drivers can derive wether to use diversity or not. + * Drivers may reject configurations or RX/TX mask combinations they cannot + * support by returning -EINVAL. + * + * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. + * This can be used to mask out antennas which are not attached or should + * not be used for receiving. If an antenna is not selected in this bitmap + * the hardware should not be configured to receive on this antenna. + * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -973,6 +995,9 @@ enum nl80211_attrs { NL80211_ATTR_SUPPORT_IBSS_RSN, + NL80211_ATTR_WIPHY_ANTENNA_TX, + NL80211_ATTR_WIPHY_ANTENNA_RX, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e5702f5ac57c..07425e648a09 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1304,6 +1304,9 @@ struct cfg80211_ops { void (*mgmt_frame_register)(struct wiphy *wiphy, struct net_device *dev, u16 frame_type, bool reg); + + int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); + int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); }; /* diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c506241f8637..5e4dda4c0fd3 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -166,7 +166,11 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_WIPHY_TX_POWER_SETTING] = { .type = NLA_U32 }, [NL80211_ATTR_WIPHY_TX_POWER_LEVEL] = { .type = NLA_U32 }, + [NL80211_ATTR_FRAME_TYPE] = { .type = NLA_U16 }, + + [NL80211_ATTR_WIPHY_ANTENNA_TX] = { .type = NLA_U32 }, + [NL80211_ATTR_WIPHY_ANTENNA_RX] = { .type = NLA_U32 }, }; /* policy for the key attributes */ @@ -526,7 +530,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, dev->wiphy.rts_threshold); NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, dev->wiphy.coverage_class); - NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS, dev->wiphy.max_scan_ssids); NLA_PUT_U16(msg, NL80211_ATTR_MAX_SCAN_IE_LEN, @@ -545,6 +548,16 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (dev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) NLA_PUT_FLAG(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE); + if (dev->ops->get_antenna) { + u32 tx_ant = 0, rx_ant = 0; + int res; + res = dev->ops->get_antenna(&dev->wiphy, &tx_ant, &rx_ant); + if (!res) { + NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_TX, tx_ant); + NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_RX, rx_ant); + } + } + nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES); if (!nl_modes) goto nla_put_failure; @@ -1024,6 +1037,22 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) goto bad_res; } + if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] && + info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) { + u32 tx_ant, rx_ant; + if (!rdev->ops->set_antenna) { + result = -EOPNOTSUPP; + goto bad_res; + } + + tx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX]); + rx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]); + + result = rdev->ops->set_antenna(&rdev->wiphy, tx_ant, rx_ant); + if (result) + goto bad_res; + } + changed = 0; if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) { -- cgit v1.2.3 From 15d967532148a5fcda075282b82a271b6595a386 Mon Sep 17 00:00:00 2001 From: Bruno Randolf <br1@einfach.org> Date: Wed, 10 Nov 2010 12:50:56 +0900 Subject: mac80211: Add antenna configuration Allow antenna configuration by calling driver's function for it. We disallow antenna configuration if the wiphy is already running, mainly to make life easier for 802.11n drivers which need to recalculate HT capabilites. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/mac80211.h | 2 ++ net/mac80211/cfg.c | 19 +++++++++++++++++ net/mac80211/driver-ops.h | 23 +++++++++++++++++++++ net/mac80211/driver-trace.h | 50 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 94 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 6122e8a3297e..a7323eca08d1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1799,6 +1799,8 @@ struct ieee80211_ops { void (*channel_switch)(struct ieee80211_hw *hw, struct ieee80211_channel_switch *ch_switch); int (*napi_poll)(struct ieee80211_hw *hw, int budget); + int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); + int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 3df12f7d0cfe..0c544074479e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1628,6 +1628,23 @@ static void ieee80211_mgmt_frame_register(struct wiphy *wiphy, ieee80211_queue_work(&local->hw, &local->reconfig_filter); } +static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + + if (local->started) + return -EOPNOTSUPP; + + return drv_set_antenna(local, tx_ant, rx_ant); +} + +static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + + return drv_get_antenna(local, tx_ant, rx_ant); +} + struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, @@ -1680,4 +1697,6 @@ struct cfg80211_ops mac80211_config_ops = { .mgmt_tx = ieee80211_mgmt_tx, .set_cqm_rssi_config = ieee80211_set_cqm_rssi_config, .mgmt_frame_register = ieee80211_mgmt_frame_register, + .set_antenna = ieee80211_set_antenna, + .get_antenna = ieee80211_get_antenna, }; diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 79019f94f621..4244554d218a 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -442,4 +442,27 @@ static inline void drv_channel_switch(struct ieee80211_local *local, trace_drv_return_void(local); } + +static inline int drv_set_antenna(struct ieee80211_local *local, + u32 tx_ant, u32 rx_ant) +{ + int ret = -EOPNOTSUPP; + might_sleep(); + if (local->ops->set_antenna) + ret = local->ops->set_antenna(&local->hw, tx_ant, rx_ant); + trace_drv_set_antenna(local, tx_ant, rx_ant, ret); + return ret; +} + +static inline int drv_get_antenna(struct ieee80211_local *local, + u32 *tx_ant, u32 *rx_ant) +{ + int ret = -EOPNOTSUPP; + might_sleep(); + if (local->ops->get_antenna) + ret = local->ops->get_antenna(&local->hw, tx_ant, rx_ant); + trace_drv_get_antenna(local, *tx_ant, *rx_ant, ret); + return ret; +} + #endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h index 431d65500d6a..c2772f23ac9c 100644 --- a/net/mac80211/driver-trace.h +++ b/net/mac80211/driver-trace.h @@ -883,6 +883,56 @@ TRACE_EVENT(drv_channel_switch, ) ); +TRACE_EVENT(drv_set_antenna, + TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret), + + TP_ARGS(local, tx_ant, rx_ant, ret), + + TP_STRUCT__entry( + LOCAL_ENTRY + __field(u32, tx_ant) + __field(u32, rx_ant) + __field(int, ret) + ), + + TP_fast_assign( + LOCAL_ASSIGN; + __entry->tx_ant = tx_ant; + __entry->rx_ant = rx_ant; + __entry->ret = ret; + ), + + TP_printk( + LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d", + LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret + ) +); + +TRACE_EVENT(drv_get_antenna, + TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret), + + TP_ARGS(local, tx_ant, rx_ant, ret), + + TP_STRUCT__entry( + LOCAL_ENTRY + __field(u32, tx_ant) + __field(u32, rx_ant) + __field(int, ret) + ), + + TP_fast_assign( + LOCAL_ASSIGN; + __entry->tx_ant = tx_ant; + __entry->rx_ant = rx_ant; + __entry->ret = ret; + ), + + TP_printk( + LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d", + LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret + ) +); + /* * Tracing for API calls that drivers call. */ -- cgit v1.2.3 From a619a4c0e1fd4e8c360c63d0df3fa0a401107d69 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen <juuso.oikarinen@nokia.com> Date: Thu, 11 Nov 2010 08:50:18 +0200 Subject: mac80211: Add function to get probe request template for current AP Chipsets with hardware based connection monitoring need to autonomically send directed probe-request frames to the AP (in the event of beacon loss, for example.) For the hardware to be able to do this, it requires a template for the frame to transmit to the AP, filled in with the BSSID and SSID of the AP, but also the supported rate IE's. This patch adds a function to mac80211, which allows the hardware driver to fetch this template after association, so it can be configured to the hardware. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/mac80211.h | 15 +++++++++++++++ net/mac80211/ieee80211_i.h | 4 ++++ net/mac80211/mlme.c | 24 ++++++++++++++++++++++++ net/mac80211/util.c | 23 ++++++++++++++++++----- 4 files changed, 61 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a7323eca08d1..af7e84199e62 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2508,6 +2508,21 @@ struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, void ieee80211_sta_block_awake(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, bool block); +/** + * ieee80211_ap_probereq_get - retrieve a Probe Request template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a Probe Request template which can, for example, be uploaded to + * hardware. The template is filled with bssid, ssid and supported rate + * information. This function must only be called from within the + * .bss_info_changed callback function and only in managed mode. The function + * is only useful when the interface is associated, otherwise it will return + * NULL. + */ +struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + /** * ieee80211_beacon_loss - inform hardware does not receive beacons * diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index b80c38689927..59a1d38212fd 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1287,6 +1287,10 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, const u8 *ie, size_t ie_len, enum ieee80211_band band, u32 rate_mask, u8 channel); +struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, + u8 *dst, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len); void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a3a9421555af..dfc4a316ac1c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1108,6 +1108,30 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, mutex_unlock(&ifmgd->mtx); } +struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct sk_buff *skb; + const u8 *ssid; + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) + return NULL; + + ASSERT_MGD_MTX(ifmgd); + + if (!ifmgd->associated) + return NULL; + + ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); + skb = ieee80211_build_probe_req(sdata, ifmgd->associated->bssid, + ssid + 2, ssid[1], NULL, 0); + + return skb; +} +EXPORT_SYMBOL(ieee80211_ap_probereq_get); + static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e486286ebf1a..68d0518254dd 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1011,9 +1011,10 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, return pos - buffer; } -void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, - const u8 *ssid, size_t ssid_len, - const u8 *ie, size_t ie_len) +struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, + u8 *dst, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -1027,7 +1028,7 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, if (!buf) { printk(KERN_DEBUG "%s: failed to allocate temporary IE " "buffer\n", sdata->name); - return; + return NULL; } chan = ieee80211_frequency_to_channel( @@ -1050,8 +1051,20 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, } IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; - ieee80211_tx_skb(sdata, skb); kfree(buf); + + return skb; +} + +void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len) +{ + struct sk_buff *skb; + + skb = ieee80211_build_probe_req(sdata, dst, ssid, ssid_len, ie, ie_len); + if (skb) + ieee80211_tx_skb(sdata, skb); } u32 ieee80211_sta_get_rates(struct ieee80211_local *local, -- cgit v1.2.3 From 885a46d0f7942d76c2f3860acb45f75237d3bb42 Mon Sep 17 00:00:00 2001 From: Felix Fietkau <nbd@openwrt.org> Date: Thu, 11 Nov 2010 15:07:22 +0100 Subject: cfg80211: add support for setting the ad-hoc multicast rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/linux/nl80211.h | 4 ++++ include/net/cfg80211.h | 2 ++ net/wireless/nl80211.c | 5 +++++ 3 files changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 17c5c8849250..037b4e498890 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -826,6 +826,8 @@ enum nl80211_commands { * the hardware should not be configured to receive on this antenna. * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX. * + * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -998,6 +1000,8 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_ANTENNA_TX, NL80211_ATTR_WIPHY_ANTENNA_RX, + NL80211_ATTR_MCAST_RATE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 07425e648a09..8fd9eebd0cc9 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -923,6 +923,7 @@ struct cfg80211_disassoc_request { * @privacy: this is a protected network, keys will be configured * after joining * @basic_rates: bitmap of basic rates to use when creating the IBSS + * @mcast_rate: multicast tx rate (in 100 kbps) */ struct cfg80211_ibss_params { u8 *ssid; @@ -934,6 +935,7 @@ struct cfg80211_ibss_params { u32 basic_rates; bool channel_fixed; bool privacy; + int mcast_rate; }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 5e4dda4c0fd3..605553842226 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -171,6 +171,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_WIPHY_ANTENNA_TX] = { .type = NLA_U32 }, [NL80211_ATTR_WIPHY_ANTENNA_RX] = { .type = NLA_U32 }, + + [NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 }, }; /* policy for the key attributes */ @@ -3681,6 +3683,9 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } } + if (info->attrs[NL80211_ATTR_MCAST_RATE]) + ibss.mcast_rate = + nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE]); if (ibss.privacy && info->attrs[NL80211_ATTR_KEYS]) { connkeys = nl80211_parse_connkeys(rdev, -- cgit v1.2.3 From 8f0729b16ae354f9db89394fc1d2d65003455d56 Mon Sep 17 00:00:00 2001 From: Felix Fietkau <nbd@openwrt.org> Date: Thu, 11 Nov 2010 15:07:23 +0100 Subject: mac80211: add support for setting the ad-hoc multicast rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/mac80211.h | 6 ++++-- net/mac80211/ibss.c | 1 + net/mac80211/rate.c | 19 +++++++++++++++---- net/mac80211/tx.c | 5 +++-- 4 files changed, 23 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index af7e84199e62..1248369a7c30 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -205,6 +205,7 @@ enum ieee80211_bss_change { * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @mcast_rate: multicast rate for AP and Ad-Hoc (in 100 kbps) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not * @channel_type: Channel type for this BSS -- the hardware might be @@ -244,6 +245,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 timestamp; u32 basic_rates; + u32 mcast_rate; u16 ht_operation_mode; s32 cqm_rssi_thold; u32 cqm_rssi_hyst; @@ -2663,7 +2665,7 @@ enum rate_control_changed { * @rate_idx_mask: user-requested rate mask (not MCS for now) * @skb: the skb that will be transmitted, the control information in it needs * to be filled in - * @ap: whether this frame is sent out in AP mode + * @bss: whether this frame is sent out in AP or IBSS mode */ struct ieee80211_tx_rate_control { struct ieee80211_hw *hw; @@ -2674,7 +2676,7 @@ struct ieee80211_tx_rate_control { bool rts, short_preamble; u8 max_rate_idx; u32 rate_idx_mask; - bool ap; + bool bss; }; struct rate_control_ops { diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 239c4836a946..6fe6837dc134 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -915,6 +915,7 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.privacy = params->privacy; sdata->u.ibss.basic_rates = params->basic_rates; + sdata->vif.bss_conf.mcast_rate = params->mcast_rate; sdata->vif.bss_conf.beacon_int = params->beacon_interval; diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 33f76993da08..76de4f8d9327 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -211,10 +211,20 @@ static bool rc_no_data_or_no_ack(struct ieee80211_tx_rate_control *txrc) return (info->flags & IEEE80211_TX_CTL_NO_ACK) || !ieee80211_is_data(fc); } -static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u8 max_rate_idx) +static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u32 mcast_rate, + struct ieee80211_supported_band *sband) { u8 i; + if (mcast_rate) { + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].bitrate == mcast_rate) { + *idx = i; + return; + } + } + } + if (basic_rates == 0) return; /* assume basic rates unknown and accept rate */ if (*idx < 0) @@ -222,7 +232,7 @@ static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u8 max_rate_idx) if (basic_rates & (1 << *idx)) return; /* selected rate is a basic rate */ - for (i = *idx + 1; i <= max_rate_idx; i++) { + for (i = *idx + 1; i <= sband->n_bitrates; i++) { if (basic_rates & (1 << i)) { *idx = i; return; @@ -243,10 +253,11 @@ bool rate_control_send_low(struct ieee80211_sta *sta, info->control.rates[0].count = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 1 : txrc->hw->max_rate_tries; - if (!sta && txrc->ap) + if (!sta && txrc->bss) rc_send_low_broadcast(&info->control.rates[0].idx, txrc->bss_conf->basic_rates, - txrc->sband->n_bitrates); + txrc->bss_conf->mcast_rate, + txrc->sband); return true; } return false; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index b392876af7d8..e69483647f33 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -622,7 +622,8 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) txrc.max_rate_idx = -1; else txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; - txrc.ap = tx->sdata->vif.type == NL80211_IFTYPE_AP; + txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || + tx->sdata->vif.type == NL80211_IFTYPE_ADHOC); /* set up RTS protection if desired */ if (len > tx->local->hw.wiphy->rts_threshold) { @@ -2308,7 +2309,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, txrc.max_rate_idx = -1; else txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; - txrc.ap = true; + txrc.bss = true; rate_control_get_rate(sdata, NULL, &txrc); info->control.vif = vif; -- cgit v1.2.3 From 4bce22b9b84032c77c7e038b07b24fcc706dfc10 Mon Sep 17 00:00:00 2001 From: Johannes Berg <johannes.berg@intel.com> Date: Tue, 16 Nov 2010 11:49:58 -0800 Subject: mac80211: defines for AC numbers In many places we've just hardcoded the AC numbers -- which is a relic from the original mac80211 (d80211). Add constants for them so we know what we're talking about. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/mac80211.h | 14 ++++++++++++++ net/mac80211/wme.c | 11 ++++++++++- 2 files changed, 24 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1248369a7c30..5b0fff2178bb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -96,6 +96,20 @@ enum ieee80211_max_queues { IEEE80211_MAX_QUEUES = 4, }; +/** + * enum ieee80211_ac_numbers - AC numbers as used in mac80211 + * @IEEE80211_AC_VO: voice + * @IEEE80211_AC_VI: video + * @IEEE80211_AC_BE: best effort + * @IEEE80211_AC_BK: background + */ +enum ieee80211_ac_numbers { + IEEE80211_AC_VO = 0, + IEEE80211_AC_VI = 1, + IEEE80211_AC_BE = 2, + IEEE80211_AC_BK = 3, +}; + /** * struct ieee80211_tx_queue_params - transmit queue configuration * diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 34e6d02da779..58e75bbc1f91 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -21,7 +21,16 @@ /* Default mapping in classifier to work with default * queue setup. */ -const int ieee802_1d_to_ac[8] = { 2, 3, 3, 2, 1, 1, 0, 0 }; +const int ieee802_1d_to_ac[8] = { + IEEE80211_AC_BE, + IEEE80211_AC_BK, + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_VO +}; static int wme_downgrade_ac(struct sk_buff *skb) { -- cgit v1.2.3 From c5485a7e7569ab32eea240c850198519e2a765ef Mon Sep 17 00:00:00 2001 From: Bruno Randolf <br1@einfach.org> Date: Tue, 16 Nov 2010 10:58:37 +0900 Subject: lib: Add generic exponentially weighted moving average (EWMA) function This adds generic functions for calculating Exponentially Weighted Moving Averages (EWMA). This implementation makes use of a structure which keeps the EWMA parameters and a scaled up internal representation to reduce rounding errors. The original idea for this implementation came from the rt2x00 driver (rt2x00link.c). I would like to use it in several places in the mac80211 and ath5k code and I hope it can be useful in many other places in the kernel code. Signed-off-by: Bruno Randolf <br1@einfach.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/linux/average.h | 32 +++++++++++++++++++++++++++ lib/Kconfig | 3 +++ lib/Makefile | 2 ++ lib/average.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 94 insertions(+) create mode 100644 include/linux/average.h create mode 100644 lib/average.c (limited to 'include') diff --git a/include/linux/average.h b/include/linux/average.h new file mode 100644 index 000000000000..7706e40f95fa --- /dev/null +++ b/include/linux/average.h @@ -0,0 +1,32 @@ +#ifndef _LINUX_AVERAGE_H +#define _LINUX_AVERAGE_H + +#include <linux/kernel.h> + +/* Exponentially weighted moving average (EWMA) */ + +/* For more documentation see lib/average.c */ + +struct ewma { + unsigned long internal; + unsigned long factor; + unsigned long weight; +}; + +extern void ewma_init(struct ewma *avg, unsigned long factor, + unsigned long weight); + +extern struct ewma *ewma_add(struct ewma *avg, unsigned long val); + +/** + * ewma_read() - Get average value + * @avg: Average structure + * + * Returns the average value held in @avg. + */ +static inline unsigned long ewma_read(const struct ewma *avg) +{ + return DIV_ROUND_CLOSEST(avg->internal, avg->factor); +} + +#endif /* _LINUX_AVERAGE_H */ diff --git a/lib/Kconfig b/lib/Kconfig index fa9bf2c06199..3116aa631af6 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -210,4 +210,7 @@ config GENERIC_ATOMIC64 config LRU_CACHE tristate +config AVERAGE + bool + endmenu diff --git a/lib/Makefile b/lib/Makefile index e6a3763b8212..76d3b8514903 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -106,6 +106,8 @@ obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o obj-$(CONFIG_ATOMIC64_SELFTEST) += atomic64_test.o +obj-$(CONFIG_AVERAGE) += average.o + hostprogs-y := gen_crc32table clean-files := crc32table.h diff --git a/lib/average.c b/lib/average.c new file mode 100644 index 000000000000..f1d1b4660c42 --- /dev/null +++ b/lib/average.c @@ -0,0 +1,57 @@ +/* + * lib/average.c + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/module.h> +#include <linux/average.h> +#include <linux/bug.h> + +/** + * DOC: Exponentially Weighted Moving Average (EWMA) + * + * These are generic functions for calculating Exponentially Weighted Moving + * Averages (EWMA). We keep a structure with the EWMA parameters and a scaled + * up internal representation of the average value to prevent rounding errors. + * The factor for scaling up and the exponential weight (or decay rate) have to + * be specified thru the init fuction. The structure should not be accessed + * directly but only thru the helper functions. + */ + +/** + * ewma_init() - Initialize EWMA parameters + * @avg: Average structure + * @factor: Factor to use for the scaled up internal value. The maximum value + * of averages can be ULONG_MAX/(factor*weight). + * @weight: Exponential weight, or decay rate. This defines how fast the + * influence of older values decreases. Has to be bigger than 1. + * + * Initialize the EWMA parameters for a given struct ewma @avg. + */ +void ewma_init(struct ewma *avg, unsigned long factor, unsigned long weight) +{ + WARN_ON(weight <= 1 || factor == 0); + avg->internal = 0; + avg->weight = weight; + avg->factor = factor; +} +EXPORT_SYMBOL(ewma_init); + +/** + * ewma_add() - Exponentially weighted moving average (EWMA) + * @avg: Average structure + * @val: Current value + * + * Add a sample to the average. + */ +struct ewma *ewma_add(struct ewma *avg, unsigned long val) +{ + avg->internal = avg->internal ? + (((avg->internal * (avg->weight - 1)) + + (val * avg->factor)) / avg->weight) : + (val * avg->factor); + return avg; +} +EXPORT_SYMBOL(ewma_add); -- cgit v1.2.3 From 86107fd170bc379869250eb7e1bd393a3a70e8ae Mon Sep 17 00:00:00 2001 From: Bruno Randolf <br1@einfach.org> Date: Tue, 16 Nov 2010 10:58:48 +0900 Subject: nl80211/mac80211: Report signal average Extend nl80211 to report an exponential weighted moving average (EWMA) of the signal value. Since the signal value usually fluctuates between different packets, an average can be more useful than the value of the last packet. This uses the recently added generic EWMA library function. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/linux/nl80211.h | 2 ++ include/net/cfg80211.h | 4 ++++ net/mac80211/Kconfig | 1 + net/mac80211/cfg.c | 3 ++- net/mac80211/rx.c | 1 + net/mac80211/sta_info.c | 2 ++ net/mac80211/sta_info.h | 3 +++ net/wireless/nl80211.c | 3 +++ 8 files changed, 18 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 037b4e498890..1ce3775e9e26 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1161,6 +1161,7 @@ enum nl80211_rate_info { * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) + * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_sta_info_txrate. * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) @@ -1178,6 +1179,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_PLID, NL80211_STA_INFO_PLINK_STATE, NL80211_STA_INFO_SIGNAL, + NL80211_STA_INFO_SIGNAL_AVG, NL80211_STA_INFO_TX_BITRATE, NL80211_STA_INFO_RX_PACKETS, NL80211_STA_INFO_TX_PACKETS, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8fd9eebd0cc9..69e2364889f1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -424,6 +424,7 @@ struct station_parameters { * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled + * @STATION_INFO_SIGNAL_AVG: @signal_avg filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -439,6 +440,7 @@ enum station_info_flags { STATION_INFO_TX_RETRIES = 1<<10, STATION_INFO_TX_FAILED = 1<<11, STATION_INFO_RX_DROP_MISC = 1<<12, + STATION_INFO_SIGNAL_AVG = 1<<13, }; /** @@ -485,6 +487,7 @@ struct rate_info { * @plid: mesh peer link id * @plink_state: mesh peer link state * @signal: signal strength of last received packet in dBm + * @signal_avg: signal strength average in dBm * @txrate: current unicast bitrate to this station * @rx_packets: packets received from this station * @tx_packets: packets transmitted to this station @@ -505,6 +508,7 @@ struct station_info { u16 plid; u8 plink_state; s8 signal; + s8 signal_avg; struct rate_info txrate; u32 rx_packets; u32 tx_packets; diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 4d6f8653ec88..798d9b9462e2 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -6,6 +6,7 @@ config MAC80211 select CRYPTO_ARC4 select CRYPTO_AES select CRC32 + select AVERAGE ---help--- This option enables the hardware independent IEEE 802.11 networking stack. diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0c544074479e..92c9cf6a7d1c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -343,8 +343,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) || (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) { - sinfo->filled |= STATION_INFO_SIGNAL; + sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG; sinfo->signal = (s8)sta->last_signal; + sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal); } sinfo->txrate.flags = 0; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index d2fcd22ab06d..9dd60a74181f 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1156,6 +1156,7 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) sta->rx_fragments++; sta->rx_bytes += rx->skb->len; sta->last_signal = status->signal; + ewma_add(&sta->avg_signal, -status->signal); /* * Change STA power saving mode only at the end of a frame diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index eff58571fd7e..f43fca8907f7 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -244,6 +244,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, sta->local = local; sta->sdata = sdata; + ewma_init(&sta->avg_signal, 1000, 8); + if (sta_prepare_rate_control(local, sta, gfp)) { kfree(sta); return NULL; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 9265acadef32..84062e2c782c 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -13,6 +13,7 @@ #include <linux/types.h> #include <linux/if_ether.h> #include <linux/workqueue.h> +#include <linux/average.h> #include "key.h" /** @@ -224,6 +225,7 @@ enum plink_state { * @rx_fragments: number of received MPDUs * @rx_dropped: number of dropped MPDUs from this STA * @last_signal: signal of last received frame from this STA + * @avg_signal: moving average of signal of received frames from this STA * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue) * @tx_filtered_count: number of frames the hardware filtered for this STA * @tx_retry_failed: number of frames that failed retry @@ -291,6 +293,7 @@ struct sta_info { unsigned long rx_fragments; unsigned long rx_dropped; int last_signal; + struct ewma avg_signal; __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES]; /* Updated from TX status path only, no locking requirements */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 605553842226..d06a40d17002 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1872,6 +1872,9 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq, if (sinfo->filled & STATION_INFO_SIGNAL) NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL, sinfo->signal); + if (sinfo->filled & STATION_INFO_SIGNAL_AVG) + NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL_AVG, + sinfo->signal_avg); if (sinfo->filled & STATION_INFO_TX_BITRATE) { txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE); if (!txrate) -- cgit v1.2.3 From 1d8638d4038eb8709edc80e37a0bbb77253d86e9 Mon Sep 17 00:00:00 2001 From: Daniel Klaffenbach <danielklaffenbach@gmail.com> Date: Fri, 19 Nov 2010 21:25:21 -0600 Subject: ssb: b43-pci-bridge: Add new vendor for BCM4318 Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- drivers/ssb/b43_pci_bridge.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c index ef9c6a04ad8f..744d3f6e4709 100644 --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c @@ -24,6 +24,7 @@ static const struct pci_device_id b43_pci_bridge_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d278dd9cb765..f29c25ede70d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2043,6 +2043,7 @@ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 +#define PCI_VENDOR_ID_BCM_GVC 0x14a4 #define PCI_VENDOR_ID_BROADCOM 0x14e4 #define PCI_DEVICE_ID_TIGON3_5752 0x1600 #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 -- cgit v1.2.3 From b2e253cf300c5e33f49b7dd8b593bfc722177401 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" <lrodriguez@atheros.com> Date: Wed, 17 Nov 2010 21:46:09 -0800 Subject: cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/regulatory.h | 7 +++++++ net/wireless/reg.c | 52 +++++++++++++++++++++++++++++++++++++++--------- 2 files changed, 50 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 9e103a4e91ee..356d6e3dc20a 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -43,6 +43,12 @@ enum environment_cap { * @intersect: indicates whether the wireless core should intersect * the requested regulatory domain with the presently set regulatory * domain. + * @processed: indicates whether or not this requests has already been + * processed. When the last request is processed it means that the + * currently regulatory domain set on cfg80211 is updated from + * CRDA and can be used by other regulatory requests. When a + * the last request is not yet processed we must yield until it + * is processed before processing any new requests. * @country_ie_checksum: checksum of the last processed and accepted * country IE * @country_ie_env: lets us know if the AP is telling us we are outdoor, @@ -54,6 +60,7 @@ struct regulatory_request { enum nl80211_reg_initiator initiator; char alpha2[2]; bool intersect; + bool processed; enum environment_cap country_ie_env; struct list_head list; }; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b522c46c4748..bc14caab19cd 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1320,6 +1320,21 @@ static int ignore_request(struct wiphy *wiphy, return -EINVAL; } +static void reg_set_request_processed(void) +{ + bool need_more_processing = false; + + last_request->processed = true; + + spin_lock(®_requests_lock); + if (!list_empty(®_requests_list)) + need_more_processing = true; + spin_unlock(®_requests_lock); + + if (need_more_processing) + schedule_work(®_work); +} + /** * __regulatory_hint - hint to the wireless core a regulatory domain * @wiphy: if the hint comes from country information from an AP, this @@ -1395,8 +1410,10 @@ new_request: * have applied the requested regulatory domain before we just * inform userspace we have processed the request */ - if (r == -EALREADY) + if (r == -EALREADY) { nl80211_send_reg_change_event(last_request); + reg_set_request_processed(); + } return r; } @@ -1428,7 +1445,11 @@ static void reg_process_hint(struct regulatory_request *reg_request) wiphy_update_regulatory(wiphy, initiator); } -/* Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* */ +/* + * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* + * Regulatory hints come on a first come first serve basis and we + * must process each one atomically. + */ static void reg_process_pending_hints(void) { struct regulatory_request *reg_request; @@ -1436,19 +1457,30 @@ static void reg_process_pending_hints(void) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); + /* When last_request->processed becomes true this will be rescheduled */ + if (last_request && !last_request->processed) { + REG_DBG_PRINT("Pending regulatory request, waiting " + "for it to be processed..."); + goto out; + } + spin_lock(®_requests_lock); - while (!list_empty(®_requests_list)) { - reg_request = list_first_entry(®_requests_list, - struct regulatory_request, - list); - list_del_init(®_request->list); + if (list_empty(®_requests_list)) { spin_unlock(®_requests_lock); - reg_process_hint(reg_request); - spin_lock(®_requests_lock); + goto out; } + + reg_request = list_first_entry(®_requests_list, + struct regulatory_request, + list); + list_del_init(®_request->list); + spin_unlock(®_requests_lock); + reg_process_hint(reg_request); + +out: mutex_unlock(®_mutex); mutex_unlock(&cfg80211_mutex); } @@ -2057,6 +2089,8 @@ int set_regdom(const struct ieee80211_regdomain *rd) nl80211_send_reg_change_event(last_request); + reg_set_request_processed(); + mutex_unlock(®_mutex); return r; -- cgit v1.2.3 From ccb14354017272ddac002e859a2711610b6af174 Mon Sep 17 00:00:00 2001 From: "John W. Linville" <linville@tuxdriver.com> Date: Wed, 24 Nov 2010 16:18:36 -0500 Subject: Revert "nl80211/mac80211: Report signal average" This reverts commit 86107fd170bc379869250eb7e1bd393a3a70e8ae. This patch inadvertantly changed the userland ABI. Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/linux/nl80211.h | 2 -- include/net/cfg80211.h | 4 ---- net/mac80211/Kconfig | 1 - net/mac80211/cfg.c | 3 +-- net/mac80211/rx.c | 1 - net/mac80211/sta_info.c | 2 -- net/mac80211/sta_info.h | 3 --- net/wireless/nl80211.c | 3 --- 8 files changed, 1 insertion(+), 18 deletions(-) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 1ce3775e9e26..037b4e498890 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1161,7 +1161,6 @@ enum nl80211_rate_info { * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) - * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_sta_info_txrate. * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) @@ -1179,7 +1178,6 @@ enum nl80211_sta_info { NL80211_STA_INFO_PLID, NL80211_STA_INFO_PLINK_STATE, NL80211_STA_INFO_SIGNAL, - NL80211_STA_INFO_SIGNAL_AVG, NL80211_STA_INFO_TX_BITRATE, NL80211_STA_INFO_RX_PACKETS, NL80211_STA_INFO_TX_PACKETS, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 69e2364889f1..8fd9eebd0cc9 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -424,7 +424,6 @@ struct station_parameters { * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled - * @STATION_INFO_SIGNAL_AVG: @signal_avg filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -440,7 +439,6 @@ enum station_info_flags { STATION_INFO_TX_RETRIES = 1<<10, STATION_INFO_TX_FAILED = 1<<11, STATION_INFO_RX_DROP_MISC = 1<<12, - STATION_INFO_SIGNAL_AVG = 1<<13, }; /** @@ -487,7 +485,6 @@ struct rate_info { * @plid: mesh peer link id * @plink_state: mesh peer link state * @signal: signal strength of last received packet in dBm - * @signal_avg: signal strength average in dBm * @txrate: current unicast bitrate to this station * @rx_packets: packets received from this station * @tx_packets: packets transmitted to this station @@ -508,7 +505,6 @@ struct station_info { u16 plid; u8 plink_state; s8 signal; - s8 signal_avg; struct rate_info txrate; u32 rx_packets; u32 tx_packets; diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 798d9b9462e2..4d6f8653ec88 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -6,7 +6,6 @@ config MAC80211 select CRYPTO_ARC4 select CRYPTO_AES select CRC32 - select AVERAGE ---help--- This option enables the hardware independent IEEE 802.11 networking stack. diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 92c9cf6a7d1c..0c544074479e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -343,9 +343,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) || (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) { - sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG; + sinfo->filled |= STATION_INFO_SIGNAL; sinfo->signal = (s8)sta->last_signal; - sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal); } sinfo->txrate.flags = 0; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 9dd60a74181f..d2fcd22ab06d 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1156,7 +1156,6 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) sta->rx_fragments++; sta->rx_bytes += rx->skb->len; sta->last_signal = status->signal; - ewma_add(&sta->avg_signal, -status->signal); /* * Change STA power saving mode only at the end of a frame diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index f43fca8907f7..eff58571fd7e 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -244,8 +244,6 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, sta->local = local; sta->sdata = sdata; - ewma_init(&sta->avg_signal, 1000, 8); - if (sta_prepare_rate_control(local, sta, gfp)) { kfree(sta); return NULL; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 84062e2c782c..9265acadef32 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -13,7 +13,6 @@ #include <linux/types.h> #include <linux/if_ether.h> #include <linux/workqueue.h> -#include <linux/average.h> #include "key.h" /** @@ -225,7 +224,6 @@ enum plink_state { * @rx_fragments: number of received MPDUs * @rx_dropped: number of dropped MPDUs from this STA * @last_signal: signal of last received frame from this STA - * @avg_signal: moving average of signal of received frames from this STA * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue) * @tx_filtered_count: number of frames the hardware filtered for this STA * @tx_retry_failed: number of frames that failed retry @@ -293,7 +291,6 @@ struct sta_info { unsigned long rx_fragments; unsigned long rx_dropped; int last_signal; - struct ewma avg_signal; __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES]; /* Updated from TX status path only, no locking requirements */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d06a40d17002..605553842226 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1872,9 +1872,6 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq, if (sinfo->filled & STATION_INFO_SIGNAL) NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL, sinfo->signal); - if (sinfo->filled & STATION_INFO_SIGNAL_AVG) - NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL_AVG, - sinfo->signal_avg); if (sinfo->filled & STATION_INFO_TX_BITRATE) { txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE); if (!txrate) -- cgit v1.2.3 From dd5b4cc71cd09c33e1579cc6d5720656e94e52de Mon Sep 17 00:00:00 2001 From: Felix Fietkau <nbd@openwrt.org> Date: Mon, 22 Nov 2010 20:58:24 +0100 Subject: cfg80211/mac80211: improve ad-hoc multicast rate handling - store the multicast rate as an index instead of the rate value (reduces cpu overhead in a hotpath) - validate the rate values (must match a bitrate in at least one sband) Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/cfg80211.h | 4 ++-- include/net/mac80211.h | 4 ++-- net/mac80211/ibss.c | 3 ++- net/mac80211/rate.c | 25 ++++++++++++------------- net/wireless/nl80211.c | 36 +++++++++++++++++++++++++++++++++--- 5 files changed, 51 insertions(+), 21 deletions(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 91f099556ac1..dd4c43f512e2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -923,7 +923,7 @@ struct cfg80211_disassoc_request { * @privacy: this is a protected network, keys will be configured * after joining * @basic_rates: bitmap of basic rates to use when creating the IBSS - * @mcast_rate: multicast tx rate (in 100 kbps) + * @mcast_rate: per-band multicast rate index + 1 (0: disabled) */ struct cfg80211_ibss_params { u8 *ssid; @@ -935,7 +935,7 @@ struct cfg80211_ibss_params { u32 basic_rates; bool channel_fixed; bool privacy; - int mcast_rate; + int mcast_rate[IEEE80211_NUM_BANDS]; }; /** diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5b0fff2178bb..08e97e5d03fd 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -219,7 +219,7 @@ enum ieee80211_bss_change { * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. - * @mcast_rate: multicast rate for AP and Ad-Hoc (in 100 kbps) + * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not * @channel_type: Channel type for this BSS -- the hardware might be @@ -259,7 +259,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 timestamp; u32 basic_rates; - u32 mcast_rate; + int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; s32 cqm_rssi_thold; u32 cqm_rssi_hyst; diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 6fe6837dc134..410d104b1347 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -915,7 +915,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.privacy = params->privacy; sdata->u.ibss.basic_rates = params->basic_rates; - sdata->vif.bss_conf.mcast_rate = params->mcast_rate; + memcpy(sdata->vif.bss_conf.mcast_rate, params->mcast_rate, + sizeof(params->mcast_rate)); sdata->vif.bss_conf.beacon_int = params->beacon_interval; diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 76de4f8d9327..3d5a2cb835c4 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -211,20 +211,11 @@ static bool rc_no_data_or_no_ack(struct ieee80211_tx_rate_control *txrc) return (info->flags & IEEE80211_TX_CTL_NO_ACK) || !ieee80211_is_data(fc); } -static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u32 mcast_rate, +static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, struct ieee80211_supported_band *sband) { u8 i; - if (mcast_rate) { - for (i = 0; i < sband->n_bitrates; i++) { - if (sband->bitrates[i].bitrate == mcast_rate) { - *idx = i; - return; - } - } - } - if (basic_rates == 0) return; /* assume basic rates unknown and accept rate */ if (*idx < 0) @@ -247,17 +238,25 @@ bool rate_control_send_low(struct ieee80211_sta *sta, struct ieee80211_tx_rate_control *txrc) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); + struct ieee80211_supported_band *sband = txrc->sband; + int mcast_rate; if (!sta || !priv_sta || rc_no_data_or_no_ack(txrc)) { info->control.rates[0].idx = rate_lowest_index(txrc->sband, sta); info->control.rates[0].count = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 1 : txrc->hw->max_rate_tries; - if (!sta && txrc->bss) + if (!sta && txrc->bss) { + mcast_rate = txrc->bss_conf->mcast_rate[sband->band]; + if (mcast_rate > 0) { + info->control.rates[0].idx = mcast_rate - 1; + return true; + } + rc_send_low_broadcast(&info->control.rates[0].idx, txrc->bss_conf->basic_rates, - txrc->bss_conf->mcast_rate, - txrc->sband); + sband); + } return true; } return false; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b15eb77195d8..8734efa663d1 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3600,6 +3600,34 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info) local_state_change); } +static bool +nl80211_parse_mcast_rate(struct cfg80211_registered_device *rdev, + int mcast_rate[IEEE80211_NUM_BANDS], + int rateval) +{ + struct wiphy *wiphy = &rdev->wiphy; + bool found = false; + int band, i; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + + sband = wiphy->bands[band]; + if (!sband) + continue; + + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].bitrate == rateval) { + mcast_rate[band] = i + 1; + found = true; + break; + } + } + } + + return found; +} + static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -3683,9 +3711,11 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } } - if (info->attrs[NL80211_ATTR_MCAST_RATE]) - ibss.mcast_rate = - nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE]); + + if (info->attrs[NL80211_ATTR_MCAST_RATE] && + !nl80211_parse_mcast_rate(rdev, ibss.mcast_rate, + nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE]))) + return -EINVAL; if (ibss.privacy && info->attrs[NL80211_ATTR_KEYS]) { connkeys = nl80211_parse_connkeys(rdev, -- cgit v1.2.3 From 79b1c460a0b55e55981c25c56597c4d5d2872de3 Mon Sep 17 00:00:00 2001 From: Bruno Randolf <br1@einfach.org> Date: Wed, 24 Nov 2010 14:34:41 +0900 Subject: cfg80211: Add documentation for antenna ops Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/net/mac80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 08e97e5d03fd..eaa4affd40cd 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1745,6 +1745,13 @@ enum ieee80211_ampdu_mlme_action { * completion of the channel switch. * * @napi_poll: Poll Rx queue for incoming data frames. + * + * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. + * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may + * reject TX/RX mask combinations they cannot support by returning -EINVAL + * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). + * + * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); -- cgit v1.2.3 From c063dbf52b998b852122dff07a8b8dd430b38437 Mon Sep 17 00:00:00 2001 From: Johannes Berg <johannes.berg@intel.com> Date: Wed, 24 Nov 2010 08:10:05 +0100 Subject: cfg80211: allow using CQM event to notify packet loss This adds the ability for drivers to use CQM events to notify about packet loss for specific stations (which could be the AP for the managed mode case). Since the threshold might be determined by the driver (it isn't passed in right now) it will be passed out of the driver to userspace in the event. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- include/linux/nl80211.h | 3 +++ include/net/cfg80211.h | 12 ++++++++++++ net/wireless/mlme.c | 12 ++++++++++++ net/wireless/nl80211.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ net/wireless/nl80211.h | 4 ++++ 5 files changed, 76 insertions(+) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 037b4e498890..d706bf3badc8 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1819,6 +1819,8 @@ enum nl80211_ps_state { * the minimum amount the RSSI level must change after an event before a * new event may be issued (to reduce effects of RSSI oscillation). * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event + * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many + * consecutive packets were not acknowledged by the peer * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -1827,6 +1829,7 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_RSSI_THOLD, NL80211_ATTR_CQM_RSSI_HYST, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, + NL80211_ATTR_CQM_PKT_LOSS_EVENT, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index dd4c43f512e2..0663945cfa48 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2601,6 +2601,18 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); +/** + * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer + * @dev: network device + * @peer: peer's MAC address + * @num_packets: how many packets were lost -- should be a fixed threshold + * but probably no less than maybe 50, or maybe a throughput dependent + * threshold (to account for temporary interference) + * @gfp: context flags + */ +void cfg80211_cqm_pktloss_notify(struct net_device *dev, + const u8 *peer, u32 num_packets, gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 26838d903b9a..6980a0c315b2 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -1028,3 +1028,15 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, nl80211_send_cqm_rssi_notify(rdev, dev, rssi_event, gfp); } EXPORT_SYMBOL(cfg80211_cqm_rssi_notify); + +void cfg80211_cqm_pktloss_notify(struct net_device *dev, + const u8 *peer, u32 num_packets, gfp_t gfp) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + /* Indicate roaming trigger event to user space */ + nl80211_send_cqm_pktloss_notify(rdev, dev, peer, num_packets, gfp); +} +EXPORT_SYMBOL(cfg80211_cqm_pktloss_notify); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 8734efa663d1..67ff7e92cb99 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5715,6 +5715,51 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev, nlmsg_free(msg); } +void +nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, + struct net_device *netdev, const u8 *peer, + u32 num_packets, gfp_t gfp) +{ + struct sk_buff *msg; + struct nlattr *pinfoattr; + void *hdr; + + msg = nlmsg_new(NLMSG_GOODSIZE, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NOTIFY_CQM); + if (!hdr) { + nlmsg_free(msg); + return; + } + + NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx); + NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex); + NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, peer); + + pinfoattr = nla_nest_start(msg, NL80211_ATTR_CQM); + if (!pinfoattr) + goto nla_put_failure; + + NLA_PUT_U32(msg, NL80211_ATTR_CQM_PKT_LOSS_EVENT, num_packets); + + nla_nest_end(msg, pinfoattr); + + if (genlmsg_end(msg, hdr) < 0) { + nlmsg_free(msg); + return; + } + + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0, + nl80211_mlme_mcgrp.id, gfp); + return; + + nla_put_failure: + genlmsg_cancel(msg, hdr); + nlmsg_free(msg); +} + static int nl80211_netlink_notify(struct notifier_block * nb, unsigned long state, void *_notify) diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index 30d2f939150d..16c2f7190768 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -87,5 +87,9 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); +void +nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, + struct net_device *netdev, const u8 *peer, + u32 num_packets, gfp_t gfp); #endif /* __NET_WIRELESS_NL80211_H */ -- cgit v1.2.3