From 704126ad81b8cb7d3d70adb9ecb143f4d3fb38af Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Sun, 4 Jan 2009 16:28:52 +0800 Subject: VT-d: handle Invalidation Queue Error to avoid system hang When hardware detects any error with a descriptor from the invalidation queue, it stops fetching new descriptors from the queue until software clears the Invalidation Queue Error bit in the Fault Status register. Following fix handles the IQE so the kernel won't be trapped in an infinite loop. Signed-off-by: Yu Zhao Signed-off-by: David Woodhouse --- include/linux/intel-iommu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index c4f6c101dbcd..d2e3cbfba14f 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -194,6 +194,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) /* FSTS_REG */ #define DMA_FSTS_PPF ((u32)2) #define DMA_FSTS_PFO ((u32)1) +#define DMA_FSTS_IQE (1 << 4) #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff) /* FRCD_REG, 32 bits access */ @@ -328,7 +329,7 @@ extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int size_order, u64 type, int non_present_entry_flush); -extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); +extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t); -- cgit v1.2.3 From 1d93e52eb48df986a3c4d5ad8a520bf1f6837367 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 11 Feb 2009 08:47:19 -0700 Subject: dmaengine: update kerneldoc Some of the kerneldoc comments in the dmaengine header describe already removed structure members. Remove them. Also add a short description for dma_device->device_is_tx_complete. Signed-off-by: Johannes Weiner Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 3e68469c1885..087e79acf8c7 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -97,7 +97,6 @@ typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t; /** * struct dma_chan_percpu - the per-CPU part of struct dma_chan - * @refcount: local_t used for open-coded "bigref" counting * @memcpy_count: transaction counter * @bytes_transferred: byte counter */ @@ -114,9 +113,6 @@ struct dma_chan_percpu { * @cookie: last cookie value returned to client * @chan_id: channel ID for sysfs * @dev: class device for sysfs - * @refcount: kref, used in "bigref" slow-mode - * @slow_ref: indicates that the DMA channel is free - * @rcu: the DMA channel's RCU head * @device_node: used to add this to the device chan list * @local: per-cpu pointer to a struct dma_chan_percpu * @client-count: how many clients are using this channel @@ -211,8 +207,6 @@ struct dma_async_tx_descriptor { * @global_node: list_head for global dma_device_list * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability - * @refcount: reference count - * @done: IO completion struct * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @device_alloc_chan_resources: allocate resources and return the @@ -225,6 +219,7 @@ struct dma_async_tx_descriptor { * @device_prep_dma_interrupt: prepares an end of chain interrupt operation * @device_prep_slave_sg: prepares a slave dma operation * @device_terminate_all: terminate all pending operations + * @device_is_tx_complete: poll for transaction completion * @device_issue_pending: push pending transactions to hardware */ struct dma_device { -- cgit v1.2.3 From 92a0acce186cde8ead56c6915d9479773673ea1a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 17 Feb 2009 21:24:05 -0800 Subject: net: Kill skb_truesize_check(), it only catches false-positives. A long time ago we had bugs, primarily in TCP, where we would modify skb->truesize (for TSO queue collapsing) in ways which would corrupt the socket memory accounting. skb_truesize_check() was added in order to try and catch this error more systematically. However this debugging check has morphed into a Frankenstein of sorts and these days it does nothing other than catch false-positives. Signed-off-by: David S. Miller --- include/linux/skbuff.h | 9 --------- include/net/sock.h | 1 - net/core/skbuff.c | 8 -------- net/core/sock.c | 1 - 4 files changed, 19 deletions(-) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index cf2cb50f77d1..9dcf956ad18a 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -416,15 +416,6 @@ extern void skb_over_panic(struct sk_buff *skb, int len, void *here); extern void skb_under_panic(struct sk_buff *skb, int len, void *here); -extern void skb_truesize_bug(struct sk_buff *skb); - -static inline void skb_truesize_check(struct sk_buff *skb) -{ - int len = sizeof(struct sk_buff) + skb->len; - - if (unlikely((int)skb->truesize < len)) - skb_truesize_bug(skb); -} extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, int getfrag(void *from, char *to, int offset, diff --git a/include/net/sock.h b/include/net/sock.h index ce3b5b622683..eefeeaf7fc46 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -860,7 +860,6 @@ static inline void sk_mem_uncharge(struct sock *sk, int size) static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb) { - skb_truesize_check(skb); sock_set_flag(sk, SOCK_QUEUE_SHRUNK); sk->sk_wmem_queued -= skb->truesize; sk_mem_uncharge(sk, skb->truesize); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index da74b844f4ea..c6a6b166f8d6 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -143,14 +143,6 @@ void skb_under_panic(struct sk_buff *skb, int sz, void *here) BUG(); } -void skb_truesize_bug(struct sk_buff *skb) -{ - WARN(net_ratelimit(), KERN_ERR "SKB BUG: Invalid truesize (%u) " - "len=%u, sizeof(sk_buff)=%Zd\n", - skb->truesize, skb->len, sizeof(struct sk_buff)); -} -EXPORT_SYMBOL(skb_truesize_bug); - /* Allocate a new skbuff. We do this ourselves so we can fill in a few * 'private' fields and also do memory statistics to find all the * [BEEP] leaks. diff --git a/net/core/sock.c b/net/core/sock.c index 6f2e1337975d..6e4f14d1ef81 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1137,7 +1137,6 @@ void sock_rfree(struct sk_buff *skb) { struct sock *sk = skb->sk; - skb_truesize_check(skb); atomic_sub(skb->truesize, &sk->sk_rmem_alloc); sk_mem_uncharge(skb->sk, skb->truesize); } -- cgit v1.2.3 From 93dbb393503d53cd226e5e1f0088fe8f4dbaa2b8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 16 Feb 2009 10:25:40 +0100 Subject: block: fix bad definition of BIO_RW_SYNC We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe --- block/blktrace.c | 2 +- drivers/md/dm-io.c | 2 +- drivers/md/dm-kcopyd.c | 2 +- drivers/md/md.c | 4 ++-- include/linux/bio.h | 2 -- include/linux/blktrace_api.h | 1 + include/linux/fs.h | 6 +++--- kernel/power/swap.c | 5 +++-- mm/page_io.c | 2 +- 9 files changed, 13 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/block/blktrace.c b/block/blktrace.c index 39cc3bfe56e4..7cf9d1ff45a0 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -142,7 +142,7 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, what |= ddir_act[rw & WRITE]; what |= MASK_TC_BIT(rw, BARRIER); - what |= MASK_TC_BIT(rw, SYNC); + what |= MASK_TC_BIT(rw, SYNCIO); what |= MASK_TC_BIT(rw, AHEAD); what |= MASK_TC_BIT(rw, META); what |= MASK_TC_BIT(rw, DISCARD); diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index a34338567a2a..f14813be4eff 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions, struct dpages old_pages = *dp; if (sync) - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); /* * For multiple regions we need to be careful to rewind diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 3073618269ea..0a225da21272 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job) { int r; struct dm_io_request io_req = { - .bi_rw = job->rw | (1 << BIO_RW_SYNC), + .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG), .mem.type = DM_IO_PAGE_LIST, .mem.ptr.pl = job->pages, .mem.offset = job->offset, diff --git a/drivers/md/md.c b/drivers/md/md.c index 4495104f6c9f..03b4cd0a6344 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, * causes ENOTSUPP, we allocate a spare bio... */ struct bio *bio = bio_alloc(GFP_NOIO, 1); - int rw = (1<bi_bdev = rdev->bdev; bio->bi_sector = sector; @@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct completion event; int ret; - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); bio->bi_bdev = bdev; bio->bi_sector = sector; diff --git a/include/linux/bio.h b/include/linux/bio.h index 2aa283ab062b..1b16108a5417 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -171,8 +171,6 @@ struct bio { #define BIO_RW_FAILFAST_TRANSPORT 8 #define BIO_RW_FAILFAST_DRIVER 9 -#define BIO_RW_SYNC (BIO_RW_SYNCIO | BIO_RW_UNPLUG) - #define bio_rw_flagged(bio, flag) ((bio)->bi_rw & (1 << (flag))) /* diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 25379cba2370..6e915878e88c 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -15,6 +15,7 @@ enum blktrace_cat { BLK_TC_WRITE = 1 << 1, /* writes */ BLK_TC_BARRIER = 1 << 2, /* barrier */ BLK_TC_SYNC = 1 << 3, /* sync IO */ + BLK_TC_SYNCIO = BLK_TC_SYNC, BLK_TC_QUEUE = 1 << 4, /* queueing/merging */ BLK_TC_REQUEUE = 1 << 5, /* requeueing */ BLK_TC_ISSUE = 1 << 6, /* issue */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 6022f44043f2..67857dc16365 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -87,10 +87,10 @@ struct inodes_stat_t { #define WRITE 1 #define READA 2 /* read-ahead - don't block if no resources */ #define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */ -#define READ_SYNC (READ | (1 << BIO_RW_SYNC)) +#define READ_SYNC (READ | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG)) #define READ_META (READ | (1 << BIO_RW_META)) -#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC)) -#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC)) +#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG)) +#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG)) #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER)) #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 6da14358537c..505f319e489c 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -60,6 +60,7 @@ static struct block_device *resume_bdev; static int submit(int rw, pgoff_t page_off, struct page *page, struct bio **bio_chain) { + const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); struct bio *bio; bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); @@ -80,7 +81,7 @@ static int submit(int rw, pgoff_t page_off, struct page *page, bio_get(bio); if (bio_chain == NULL) { - submit_bio(rw | (1 << BIO_RW_SYNC), bio); + submit_bio(bio_rw, bio); wait_on_page_locked(page); if (rw == READ) bio_set_pages_dirty(bio); @@ -90,7 +91,7 @@ static int submit(int rw, pgoff_t page_off, struct page *page, get_page(page); /* These pages are freed later */ bio->bi_private = *bio_chain; *bio_chain = bio; - submit_bio(rw | (1 << BIO_RW_SYNC), bio); + submit_bio(bio_rw, bio); } return 0; } diff --git a/mm/page_io.c b/mm/page_io.c index dc6ce0afbded..3023c475e041 100644 --- a/mm/page_io.c +++ b/mm/page_io.c @@ -111,7 +111,7 @@ int swap_writepage(struct page *page, struct writeback_control *wbc) goto out; } if (wbc->sync_mode == WB_SYNC_ALL) - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); count_vm_event(PSWPOUT); set_page_writeback(page); unlock_page(page); -- cgit v1.2.3 From 5ca431f9ae8db8c6edb9c64bebe6d6521077afd6 Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Wed, 18 Feb 2009 15:29:23 +0100 Subject: netfilter: nfnetlink_log: fix per-rule qthreshold override In NFLOG the per-rule qthreshold should overrides per-instance only it is set. With current code, the per-rule qthreshold is 1 if not set and it overrides the per-instance qthreshold. This patch modifies the default xt_NFLOG threshold from 1 to 0. Thus a value of 0 means there is no per-rule setting and the instance parameter has to apply. Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_NFLOG.h | 2 +- net/netfilter/nfnetlink_log.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter/xt_NFLOG.h b/include/linux/netfilter/xt_NFLOG.h index cdcd0ed58f7a..4b36aeb46a10 100644 --- a/include/linux/netfilter/xt_NFLOG.h +++ b/include/linux/netfilter/xt_NFLOG.h @@ -2,7 +2,7 @@ #define _XT_NFLOG_TARGET #define XT_NFLOG_DEFAULT_GROUP 0x1 -#define XT_NFLOG_DEFAULT_THRESHOLD 1 +#define XT_NFLOG_DEFAULT_THRESHOLD 0 #define XT_NFLOG_MASK 0x0 diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index fa49dc7fe100..580b837e44dd 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -590,8 +590,10 @@ nfulnl_log_packet(u_int8_t pf, qthreshold = inst->qthreshold; /* per-rule qthreshold overrides per-instance */ - if (qthreshold > li->u.ulog.qthreshold) - qthreshold = li->u.ulog.qthreshold; + if (li->u.ulog.qthreshold) + if (qthreshold > li->u.ulog.qthreshold) + qthreshold = li->u.ulog.qthreshold; + switch (inst->copy_mode) { case NFULNL_COPY_META: -- cgit v1.2.3 From 5962fc6d5fff09c8e6fb8cadcb18327a0f4277f7 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 18 Feb 2009 15:30:34 +0100 Subject: netfilter: nf_conntrack: don't try to deliver events for untracked connections The untracked conntrack actually does usually have events marked for delivery as its not special-cased in that part of the code. Skip the actual delivery since it impacts performance noticeably. Signed-off-by: Patrick McHardy --- include/net/netfilter/nf_conntrack_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h index e78afe7f28e3..c25068e38516 100644 --- a/include/net/netfilter/nf_conntrack_core.h +++ b/include/net/netfilter/nf_conntrack_core.h @@ -59,7 +59,7 @@ static inline int nf_conntrack_confirm(struct sk_buff *skb) struct nf_conn *ct = (struct nf_conn *)skb->nfct; int ret = NF_ACCEPT; - if (ct) { + if (ct && ct != &nf_conntrack_untracked) { if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) ret = __nf_conntrack_confirm(skb); nf_ct_deliver_cached_events(ct); -- cgit v1.2.3 From c296861291669f305deef19b78042330d7135017 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 18 Feb 2009 14:48:12 -0800 Subject: vmalloc: add __get_vm_area_caller() We have get_vm_area_caller() and __get_vm_area() but not __get_vm_area_caller() On powerpc, I use __get_vm_area() to separate the ranges of addresses given to vmalloc vs. ioremap (various good reasons for that) so in order to be able to implement the new caller tracking in /proc/vmallocinfo, I need a "_caller" variant of it. (akpm: needed for ongoing powerpc development, so merge it early) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Benjamin Herrenschmidt Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmalloc.h | 4 ++++ mm/vmalloc.c | 8 ++++++++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 506e7620a986..9c0890c7a06a 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -84,6 +84,10 @@ extern struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags, void *caller); extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags, unsigned long start, unsigned long end); +extern struct vm_struct *__get_vm_area_caller(unsigned long size, + unsigned long flags, + unsigned long start, unsigned long end, + void *caller); extern struct vm_struct *get_vm_area_node(unsigned long size, unsigned long flags, int node, gfp_t gfp_mask); diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 75f49d312e8c..4dd2636d0b92 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1106,6 +1106,14 @@ struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags, } EXPORT_SYMBOL_GPL(__get_vm_area); +struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags, + unsigned long start, unsigned long end, + void *caller) +{ + return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL, + caller); +} + /** * get_vm_area - reserve a contiguous kernel virtual area * @size: size of the area -- cgit v1.2.3 From 55ec82176eca52e4e0530a82a0eb59160a1a95a1 Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Wed, 18 Feb 2009 14:48:15 -0800 Subject: vfs: separate FMODE_PREAD/FMODE_PWRITE into separate flags Separate FMODE_PREAD and FMODE_PWRITE into separate flags to reflect the reality that the read and write paths may have independent restrictions. A git grep verifies that these flags are always cleared together so this new behavior will only apply to interfaces that change to clear flags individually. This is required for "seq_file: properly cope with pread", a post-2.6.25 regression fix. [akpm@linux-foundation.org: add comment] Signed-off-by: Paul Turner Cc: Eric Biederman Cc: Alexey Dobriyan Cc: Al Viro Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 6022f44043f2..5852bd6afbe4 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -54,24 +54,30 @@ struct inodes_stat_t { #define MAY_ACCESS 16 #define MAY_OPEN 32 +/* + * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond + * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() + */ + /* file is open for reading */ #define FMODE_READ ((__force fmode_t)1) /* file is open for writing */ #define FMODE_WRITE ((__force fmode_t)2) /* file is seekable */ #define FMODE_LSEEK ((__force fmode_t)4) -/* file can be accessed using pread/pwrite */ +/* file can be accessed using pread */ #define FMODE_PREAD ((__force fmode_t)8) -#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */ +/* file can be accessed using pwrite */ +#define FMODE_PWRITE ((__force fmode_t)16) /* File is opened for execution with sys_execve / sys_uselib */ -#define FMODE_EXEC ((__force fmode_t)16) +#define FMODE_EXEC ((__force fmode_t)32) /* File is opened with O_NDELAY (only set for block devices) */ -#define FMODE_NDELAY ((__force fmode_t)32) +#define FMODE_NDELAY ((__force fmode_t)64) /* File is opened with O_EXCL (only set for block devices) */ -#define FMODE_EXCL ((__force fmode_t)64) +#define FMODE_EXCL ((__force fmode_t)128) /* File is opened using open(.., 3, ..) and is writeable only for ioctls (specialy hack for floppy.c) */ -#define FMODE_WRITE_IOCTL ((__force fmode_t)128) +#define FMODE_WRITE_IOCTL ((__force fmode_t)256) /* * Don't update ctime and mtime. -- cgit v1.2.3 From 8f19d472935c83d823fa4cf02bcc0a7b9952db30 Mon Sep 17 00:00:00 2001 From: Eric Biederman Date: Wed, 18 Feb 2009 14:48:16 -0800 Subject: seq_file: properly cope with pread Currently seq_read assumes that the offset passed to it is always the offset it passed to user space. In the case pread this assumption is broken and we do the wrong thing when presented with pread. To solve this I introduce an offset cache inside of struct seq_file so we know where our logical file position is. Then in seq_read if we try to read from another offset we reset our data structures and attempt to go to the offset user space wanted. [akpm@linux-foundation.org: restore FMODE_PWRITE] [pjt@google.com: seq_open needs its fmode opened up to take advantage of this] Signed-off-by: Eric Biederman Cc: Alexey Dobriyan Cc: Al Viro Cc: Paul Turner Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/seq_file.c | 36 ++++++++++++++++++++++++++++++++---- include/linux/seq_file.h | 1 + 2 files changed, 33 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/fs/seq_file.c b/fs/seq_file.c index 5267098532bf..a1a4cfe19210 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -48,8 +48,16 @@ int seq_open(struct file *file, const struct seq_operations *op) */ file->f_version = 0; - /* SEQ files support lseek, but not pread/pwrite */ - file->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); + /* + * seq_files support lseek() and pread(). They do not implement + * write() at all, but we clear FMODE_PWRITE here for historical + * reasons. + * + * If a client of seq_files a) implements file.write() and b) wishes to + * support pwrite() then that client will need to implement its own + * file.open() which calls seq_open() and then sets FMODE_PWRITE. + */ + file->f_mode &= ~FMODE_PWRITE; return 0; } EXPORT_SYMBOL(seq_open); @@ -131,6 +139,22 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos) int err = 0; mutex_lock(&m->lock); + + /* Don't assume *ppos is where we left it */ + if (unlikely(*ppos != m->read_pos)) { + m->read_pos = *ppos; + while ((err = traverse(m, *ppos)) == -EAGAIN) + ; + if (err) { + /* With prejudice... */ + m->read_pos = 0; + m->version = 0; + m->index = 0; + m->count = 0; + goto Done; + } + } + /* * seq_file->op->..m_start/m_stop/m_next may do special actions * or optimisations based on the file->f_version, so we want to @@ -230,8 +254,10 @@ Fill: Done: if (!copied) copied = err; - else + else { *ppos += copied; + m->read_pos += copied; + } file->f_version = m->version; mutex_unlock(&m->lock); return copied; @@ -266,16 +292,18 @@ loff_t seq_lseek(struct file *file, loff_t offset, int origin) if (offset < 0) break; retval = offset; - if (offset != file->f_pos) { + if (offset != m->read_pos) { while ((retval=traverse(m, offset)) == -EAGAIN) ; if (retval) { /* with extreme prejudice... */ file->f_pos = 0; + m->read_pos = 0; m->version = 0; m->index = 0; m->count = 0; } else { + m->read_pos = offset; retval = file->f_pos = offset; } } diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index 40ea5058c2ec..f616f31576d7 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -19,6 +19,7 @@ struct seq_file { size_t from; size_t count; loff_t index; + loff_t read_pos; u64 version; struct mutex lock; const struct seq_operations *op; -- cgit v1.2.3 From 610d18f4128ebbd88845d0fc60cce67b49af881e Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Wed, 18 Feb 2009 14:48:18 -0800 Subject: timerfd: add flags check As requested by Michael, add a missing check for valid flags in timerfd_settime(), and make it return EINVAL in case some extra bits are set. Michael said: If this is to be any use to userland apps that want to check flag support (perhaps it is too late already), then the sooner we get it into the kernel the better: 2.6.29 would be good; earlier stables as well would be even better. [akpm@linux-foundation.org: remove unused TFD_FLAGS_SET] Acked-by: Michael Kerrisk Signed-off-by: Davide Libenzi Cc: [2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/timerfd.c | 12 ++++++------ include/linux/timerfd.h | 16 ++++++++++++---- 2 files changed, 18 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/fs/timerfd.c b/fs/timerfd.c index 6a123b8ff3f5..b042bd7034b1 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -186,10 +186,9 @@ SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags) BUILD_BUG_ON(TFD_CLOEXEC != O_CLOEXEC); BUILD_BUG_ON(TFD_NONBLOCK != O_NONBLOCK); - if (flags & ~(TFD_CLOEXEC | TFD_NONBLOCK)) - return -EINVAL; - if (clockid != CLOCK_MONOTONIC && - clockid != CLOCK_REALTIME) + if ((flags & ~TFD_CREATE_FLAGS) || + (clockid != CLOCK_MONOTONIC && + clockid != CLOCK_REALTIME)) return -EINVAL; ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); @@ -201,7 +200,7 @@ SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags) hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS); ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx, - flags & (O_CLOEXEC | O_NONBLOCK)); + flags & TFD_SHARED_FCNTL_FLAGS); if (ufd < 0) kfree(ctx); @@ -219,7 +218,8 @@ SYSCALL_DEFINE4(timerfd_settime, int, ufd, int, flags, if (copy_from_user(&ktmr, utmr, sizeof(ktmr))) return -EFAULT; - if (!timespec_valid(&ktmr.it_value) || + if ((flags & ~TFD_SETTIME_FLAGS) || + !timespec_valid(&ktmr.it_value) || !timespec_valid(&ktmr.it_interval)) return -EINVAL; diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h index 86cb0501d3e2..2d0792983f8c 100644 --- a/include/linux/timerfd.h +++ b/include/linux/timerfd.h @@ -11,13 +11,21 @@ /* For O_CLOEXEC and O_NONBLOCK */ #include -/* Flags for timerfd_settime. */ +/* + * CAREFUL: Check include/asm-generic/fcntl.h when defining + * new flags, since they might collide with O_* ones. We want + * to re-use O_* flags that couldn't possibly have a meaning + * from eventfd, in order to leave a free define-space for + * shared O_* flags. + */ #define TFD_TIMER_ABSTIME (1 << 0) - -/* Flags for timerfd_create. */ #define TFD_CLOEXEC O_CLOEXEC #define TFD_NONBLOCK O_NONBLOCK +#define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK) +/* Flags for timerfd_create. */ +#define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS +/* Flags for timerfd_settime. */ +#define TFD_SETTIME_FLAGS TFD_TIMER_ABSTIME #endif /* _LINUX_TIMERFD_H */ - -- cgit v1.2.3 From 1cf6e7d83bf334cc5916137862c920a97aabc018 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 18 Feb 2009 14:48:18 -0800 Subject: mm: task dirty accounting fix YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty). Additionally, there is some inconsistency about when task_dirty_inc is called. It is used for dirty balancing, however it even gets called for __set_page_dirty_no_writeback. So rather than increment it in a set_page_dirty wrapper, move it down to exactly where the dirty page accounting stats are incremented. Cc: YAMAMOTO Takashi Signed-off-by: Nick Piggin Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 1 + include/linux/mm.h | 1 + mm/page-writeback.c | 13 +++---------- 3 files changed, 5 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/fs/buffer.c b/fs/buffer.c index 665d446b25bc..ff4d1cdd779b 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -777,6 +777,7 @@ static int __set_page_dirty(struct page *page, __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); + task_dirty_inc(current); task_io_account_write(PAGE_CACHE_SIZE); } radix_tree_tag_set(&mapping->page_tree, diff --git a/include/linux/mm.h b/include/linux/mm.h index 7dc04ff5ab89..10074212a35b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1159,6 +1159,7 @@ extern int filemap_fault(struct vm_area_struct *, struct vm_fault *); /* mm/page-writeback.c */ int write_one_page(struct page *page, int wait); +void task_dirty_inc(struct task_struct *tsk); /* readahead.c */ #define VM_MAX_READAHEAD 128 /* kbytes */ diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 3c84128596ba..74dc57c74349 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -240,7 +240,7 @@ void bdi_writeout_inc(struct backing_dev_info *bdi) } EXPORT_SYMBOL_GPL(bdi_writeout_inc); -static inline void task_dirty_inc(struct task_struct *tsk) +void task_dirty_inc(struct task_struct *tsk) { prop_inc_single(&vm_dirties, &tsk->dirties); } @@ -1230,6 +1230,7 @@ int __set_page_dirty_nobuffers(struct page *page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); + task_dirty_inc(current); task_io_account_write(PAGE_CACHE_SIZE); } radix_tree_tag_set(&mapping->page_tree, @@ -1262,7 +1263,7 @@ EXPORT_SYMBOL(redirty_page_for_writepage); * If the mapping doesn't provide a set_page_dirty a_op, then * just fall through and assume that it wants buffer_heads. */ -static int __set_page_dirty(struct page *page) +int set_page_dirty(struct page *page) { struct address_space *mapping = page_mapping(page); @@ -1280,14 +1281,6 @@ static int __set_page_dirty(struct page *page) } return 0; } - -int set_page_dirty(struct page *page) -{ - int ret = __set_page_dirty(page); - if (ret) - task_dirty_inc(current); - return ret; -} EXPORT_SYMBOL(set_page_dirty); /* -- cgit v1.2.3 From 287d859222e0adbc67666a6154aaf42d7d5bbb54 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 18 Feb 2009 14:48:26 -0800 Subject: atmel-mci: fix initialization of dma slave data The conversion of atmel-mci to dma_request_channel missed the initialization of the channel dma_slave information. The filter_fn passed to dma_request_channel is responsible for initializing the channel's private data. This implementation has the additional benefit of enabling a generic client-channel data passing mechanism. Reviewed-by: Atsushi Nemoto Signed-off-by: Dan Williams Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/dma/dmaengine.c | 2 ++ drivers/dma/dw_dmac.c | 5 ++--- drivers/dma/dw_dmac_regs.h | 2 -- drivers/mmc/host/atmel-mci.c | 5 +++-- include/linux/dmaengine.h | 2 ++ 5 files changed, 9 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a58993011edb..280a9d263eb3 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v dma_chan_name(chan), err); else break; + chan->private = NULL; chan = NULL; } } @@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan) WARN_ONCE(chan->client_count != 1, "chan reference count %d != 1\n", chan->client_count); dma_chan_put(chan); + chan->private = NULL; mutex_unlock(&dma_list_mutex); } EXPORT_SYMBOL_GPL(dma_release_channel); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 6b702cc46b3d..a97c07eef7ec 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned long flags) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma_slave *dws = dwc->dws; + struct dw_dma_slave *dws = chan->private; struct dw_desc *prev; struct dw_desc *first; u32 ctllo; @@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) cfghi = DWC_CFGH_FIFO_MODE; cfglo = 0; - dws = dwc->dws; + dws = chan->private; if (dws) { /* * We need controller-specific data to set up slave @@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) spin_lock_bh(&dwc->lock); list_splice_init(&dwc->free_list, &list); dwc->descs_allocated = 0; - dwc->dws = NULL; /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 00fdd187bb0c..b252b202c5cf 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -139,8 +139,6 @@ struct dw_dma_chan { struct list_head queue; struct list_head free_list; - struct dw_dma_slave *dws; - unsigned int descs_allocated; }; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 76bfe16c09b1..2b1196e6142c 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave) { struct dw_dma_slave *dws = slave; - if (dws->dma_dev == chan->device->dev) + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; return true; - else + } else return false; } #endif diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 3e68469c1885..f0413845f20e 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -121,6 +121,7 @@ struct dma_chan_percpu { * @local: per-cpu pointer to a struct dma_chan_percpu * @client-count: how many clients are using this channel * @table_count: number of appearances in the mem-to-mem allocation table + * @private: private data for certain client-channel associations */ struct dma_chan { struct dma_device *device; @@ -134,6 +135,7 @@ struct dma_chan { struct dma_chan_percpu *local; int client_count; int table_count; + void *private; }; /** -- cgit v1.2.3 From f2dbcfa738368c8a40d4a5f0b65dc9879577cb21 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 18 Feb 2009 14:48:32 -0800 Subject: mm: clean up for early_pfn_to_nid() What's happening is that the assertion in mm/page_alloc.c:move_freepages() is triggering: BUG_ON(page_zone(start_page) != page_zone(end_page)); Once I knew this is what was happening, I added some annotations: if (unlikely(page_zone(start_page) != page_zone(end_page))) { printk(KERN_ERR "move_freepages: Bogus zones: " "start_page[%p] end_page[%p] zone[%p]\n", start_page, end_page, zone); printk(KERN_ERR "move_freepages: " "start_zone[%p] end_zone[%p]\n", page_zone(start_page), page_zone(end_page)); printk(KERN_ERR "move_freepages: " "start_pfn[0x%lx] end_pfn[0x%lx]\n", page_to_pfn(start_page), page_to_pfn(end_page)); printk(KERN_ERR "move_freepages: " "start_nid[%d] end_nid[%d]\n", page_to_nid(start_page), page_to_nid(end_page)); ... And here's what I got: move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00] move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00] move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff] move_freepages: start_nid[1] end_nid[0] My memory layout on this box is: [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x0081ff5d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] 1: 0x00800000 -> 0x0081f7ff [ 0.000000] 1: 0x0081f800 -> 0x0081fe50 [ 0.000000] 1: 0x0081fed1 -> 0x0081fed8 [ 0.000000] 1: 0x0081feda -> 0x0081fedb [ 0.000000] 1: 0x0081fedd -> 0x0081fee5 [ 0.000000] 1: 0x0081fee7 -> 0x0081ff51 [ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d So it's a block move in that 0x81f600-->0x81f7ff region which triggers the problem. This patch: Declaration of early_pfn_to_nid() is scattered over per-arch include files, and it seems it's complicated to know when the declaration is used. I think it makes fix-for-memmap-init not easy. This patch moves all declaration to include/linux/mm.h After this, if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use static definition in include/linux/mm.h else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use generic definition in mm/page_alloc.c else -> per-arch back end function will be called. Signed-off-by: KAMEZAWA Hiroyuki Tested-by: KOSAKI Motohiro Reported-by: David Miller Cc: Mel Gorman Cc: Heiko Carstens Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/include/asm/mmzone.h | 4 ---- arch/ia64/mm/numa.c | 2 +- arch/x86/include/asm/mmzone_32.h | 2 -- arch/x86/include/asm/mmzone_64.h | 2 -- arch/x86/mm/numa_64.c | 2 +- include/linux/mm.h | 19 ++++++++++++++++--- mm/page_alloc.c | 8 +++++++- 7 files changed, 25 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h index 34efe88eb849..f2ca32069b3f 100644 --- a/arch/ia64/include/asm/mmzone.h +++ b/arch/ia64/include/asm/mmzone.h @@ -31,10 +31,6 @@ static inline int pfn_to_nid(unsigned long pfn) #endif } -#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -extern int early_pfn_to_nid(unsigned long pfn); -#endif - #ifdef CONFIG_IA64_DIG /* DIG systems are small */ # define MAX_PHYSNODE_ID 8 # define NR_NODE_MEMBLKS (MAX_NUMNODES * 8) diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index b73bf1838e57..5061c3fb6796 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -58,7 +58,7 @@ paddr_to_nid(unsigned long paddr) * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where * the section resides. */ -int early_pfn_to_nid(unsigned long pfn) +int __meminit __early_pfn_to_nid(unsigned long pfn) { int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec; diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 07f1af494ca5..105fb90a0635 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -32,8 +32,6 @@ static inline void get_memcfg_numa(void) get_memcfg_numa_flat(); } -extern int early_pfn_to_nid(unsigned long pfn); - extern void resume_map_numa_kva(pgd_t *pgd); #else /* !CONFIG_NUMA */ diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h index a5b3817d4b9e..a29f48c2a322 100644 --- a/arch/x86/include/asm/mmzone_64.h +++ b/arch/x86/include/asm/mmzone_64.h @@ -40,8 +40,6 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) #define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ NODE_DATA(nid)->node_spanned_pages) -extern int early_pfn_to_nid(unsigned long pfn); - #ifdef CONFIG_NUMA_EMU #define FAKE_NODE_MIN_SIZE (64 * 1024 * 1024) #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 71a14f89f89e..f3516da035d1 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -145,7 +145,7 @@ int __init compute_hash_shift(struct bootnode *nodes, int numnodes, return shift; } -int early_pfn_to_nid(unsigned long pfn) +int __meminit __early_pfn_to_nid(unsigned long pfn) { return phys_to_nid(pfn << PAGE_SHIFT); } diff --git a/include/linux/mm.h b/include/linux/mm.h index 10074212a35b..065cdf8c09fb 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1041,10 +1041,23 @@ extern void free_bootmem_with_active_regions(int nid, typedef int (*work_fn_t)(unsigned long, unsigned long, void *); extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data); extern void sparse_memory_present_with_active_regions(int nid); -#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -extern int early_pfn_to_nid(unsigned long pfn); -#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */ #endif /* CONFIG_ARCH_POPULATES_NODE_MAP */ + +#if !defined(CONFIG_ARCH_POPULATES_NODE_MAP) && \ + !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID) +static inline int __early_pfn_to_nid(unsigned long pfn) +{ + return 0; +} +#else +/* please see mm/page_alloc.c */ +extern int __meminit early_pfn_to_nid(unsigned long pfn); +#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID +/* there is a per-arch backend function. */ +extern int __meminit __early_pfn_to_nid(unsigned long pfn); +#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */ +#endif + extern void set_dma_reserve(unsigned long new_dma_reserve); extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long, enum memmap_context); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5675b3073854..c5dd74602efc 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2989,7 +2989,7 @@ static int __meminit next_active_region_index_in_nid(int index, int nid) * was used and there are no special requirements, this is a convenient * alternative */ -int __meminit early_pfn_to_nid(unsigned long pfn) +int __meminit __early_pfn_to_nid(unsigned long pfn) { int i; @@ -3005,6 +3005,12 @@ int __meminit early_pfn_to_nid(unsigned long pfn) } #endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */ +int __meminit early_pfn_to_nid(unsigned long pfn) +{ + return __early_pfn_to_nid(pfn); +} + + /* Basic iterator support to walk early_node_map[] */ #define for_each_active_range_index_in_nid(i, nid) \ for (i = first_active_region_index_in_nid(nid); i != -1; \ -- cgit v1.2.3 From cc2559bccc72767cb446f79b071d96c30c26439b Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 18 Feb 2009 14:48:33 -0800 Subject: mm: fix memmap init for handling memory hole Now, early_pfn_in_nid(PFN, NID) may returns false if PFN is a hole. and memmap initialization was not done. This was a trouble for sparc boot. To fix this, the PFN should be initialized and marked as PG_reserved. This patch changes early_pfn_in_nid() return true if PFN is a hole. Signed-off-by: KAMEZAWA Hiroyuki Reported-by: David Miller Tested-by: KOSAKI Motohiro Cc: Mel Gorman Cc: Heiko Carstens Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/mm/numa.c | 2 +- include/linux/mmzone.h | 2 +- mm/page_alloc.c | 23 ++++++++++++++++++++--- 3 files changed, 22 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index 5061c3fb6796..3efea7d0a351 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -70,7 +70,7 @@ int __meminit __early_pfn_to_nid(unsigned long pfn) return node_memblk[i].nid; } - return 0; + return -1; } #ifdef CONFIG_MEMORY_HOTPLUG diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 09c14e213b63..1aca6cebbb78 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1071,7 +1071,7 @@ void sparse_init(void); #endif /* CONFIG_SPARSEMEM */ #ifdef CONFIG_NODES_SPAN_OTHER_NODES -#define early_pfn_in_nid(pfn, nid) (early_pfn_to_nid(pfn) == (nid)) +bool early_pfn_in_nid(unsigned long pfn, int nid); #else #define early_pfn_in_nid(pfn, nid) (1) #endif diff --git a/mm/page_alloc.c b/mm/page_alloc.c index c5dd74602efc..5c44ed49ca93 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3000,16 +3000,33 @@ int __meminit __early_pfn_to_nid(unsigned long pfn) if (start_pfn <= pfn && pfn < end_pfn) return early_node_map[i].nid; } - - return 0; + /* This is a memory hole */ + return -1; } #endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */ int __meminit early_pfn_to_nid(unsigned long pfn) { - return __early_pfn_to_nid(pfn); + int nid; + + nid = __early_pfn_to_nid(pfn); + if (nid >= 0) + return nid; + /* just returns 0 */ + return 0; } +#ifdef CONFIG_NODES_SPAN_OTHER_NODES +bool __meminit early_pfn_in_nid(unsigned long pfn, int node) +{ + int nid; + + nid = __early_pfn_to_nid(pfn); + if (nid >= 0 && nid != node) + return false; + return true; +} +#endif /* Basic iterator support to walk early_node_map[] */ #define for_each_active_range_index_in_nid(i, nid) \ -- cgit v1.2.3 From ffa7525c13eb3db0fd19a3e1cffe2ce6f561f5f3 Mon Sep 17 00:00:00 2001 From: Adam Lackorzynski Date: Wed, 18 Feb 2009 14:48:34 -0800 Subject: jsm: additional device support I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski Cc: Scott H Kilau Cc: Wendy Xiong Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/jsm/jsm_driver.c | 3 +++ include/linux/pci_ids.h | 1 + 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 92187e28608a..ac79cbe4c2cf 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) brd->pci_dev = pdev; if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) brd->maxports = 4; + else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + brd->maxports = 8; else brd->maxports = 2; @@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, { 0, } }; MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 918391b4b109..114b8192eab9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1445,6 +1445,7 @@ #define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071 #define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072 #define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073 +#define PCI_DEVICE_ID_DIGI_NEO_8 0x00B1 #define PCI_DEVICE_ID_NEO_2DB9 0x00C8 #define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9 #define PCI_DEVICE_ID_NEO_2RJ45 0x00CA -- cgit v1.2.3 From 97bef7dd05563807539122c488a5dd93ed327722 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Wed, 18 Feb 2009 14:48:40 -0800 Subject: Bernhard has moved Since I don't work for SUSE any more and the bwalle@suse.de address is invalid, correct it in the copyright headers and documentation. Signed-off-by: Bernhard Walle Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-firmware-memmap | 2 +- drivers/firmware/memmap.c | 2 +- include/linux/firmware-map.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/Documentation/ABI/testing/sysfs-firmware-memmap b/Documentation/ABI/testing/sysfs-firmware-memmap index 0d99ee6ae02e..eca0d65087dc 100644 --- a/Documentation/ABI/testing/sysfs-firmware-memmap +++ b/Documentation/ABI/testing/sysfs-firmware-memmap @@ -1,6 +1,6 @@ What: /sys/firmware/memmap/ Date: June 2008 -Contact: Bernhard Walle +Contact: Bernhard Walle Description: On all platforms, the firmware provides a memory map which the kernel reads. The resources from that memory map are registered diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 261b9aa3f248..05aa2d406ac6 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -1,7 +1,7 @@ /* * linux/drivers/firmware/memmap.c * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle + * by Bernhard Walle * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h index 6e199c8dfacc..cca686b39123 100644 --- a/include/linux/firmware-map.h +++ b/include/linux/firmware-map.h @@ -1,7 +1,7 @@ /* * include/linux/firmware-map.h: * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle + * by Bernhard Walle * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by -- cgit v1.2.3 From e4dd61882e2cfe47ea72ecd825671e8e5ae29038 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 18 Feb 2009 23:31:11 -0800 Subject: vlan: Update skb->mac_header in __vlan_put_tag(). After moving mac addresses in __vlan_put_tag() skb->mac_header needs to be updated. Reported-by: Karl Hiramoto Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/linux/if_vlan.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index f8ff918c208f..e1ff5b14310e 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -210,6 +210,7 @@ static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci) /* Move the mac addresses to the beginning of the new header. */ memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN); + skb->mac_header -= VLAN_HLEN; /* first, the ethernet type */ veth->h_vlan_proto = htons(ETH_P_8021Q); -- cgit v1.2.3 From ea39f835168f60b01e59d0f348da25d297e7cf94 Mon Sep 17 00:00:00 2001 From: Kristian Høgsberg Date: Thu, 12 Feb 2009 14:37:56 -0500 Subject: drm: Release user fbs in drm_release MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Avoids leaking fbs and associated buffers on release. Signed-off-by: Kristian Høgsberg Tested-by: Tested-by: Chris Wilson Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 3 +-- drivers/gpu/drm/drm_fops.c | 3 +++ include/drm/drm_crtc.h | 2 +- 3 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index bfce0992fefb..94a768871734 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1741,9 +1741,8 @@ out: * RETURNS: * Zero on success, errno on failure. */ -void drm_fb_release(struct file *filp) +void drm_fb_release(struct drm_file *priv) { - struct drm_file *priv = filp->private_data; struct drm_device *dev = priv->minor->dev; struct drm_framebuffer *fb, *tfb; diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index b06a53715853..6c020fe5431c 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -457,6 +457,9 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); + if (dev->driver->driver_features & DRIVER_MODESET) + drm_fb_release(file_priv); + mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index d54de24bf371..5ded1acfb543 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -609,7 +609,7 @@ extern char *drm_get_dvi_i_subconnector_name(int val); extern char *drm_get_dvi_i_select_name(int val); extern char *drm_get_tv_subconnector_name(int val); extern char *drm_get_tv_select_name(int val); -extern void drm_fb_release(struct file *filp); +extern void drm_fb_release(struct drm_file *file_priv); extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group); extern struct edid *drm_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter); -- cgit v1.2.3 From 5c3b82e2b229e78eb32f4ea12d16f3ebeeab3fc7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 11 Feb 2009 13:25:09 +0000 Subject: drm: Propagate failure from setting crtc base. Check the error paths within intel_pipe_set_base() to first cleanup and then report back the error. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 15 +++++-- drivers/gpu/drm/i915/intel_display.c | 84 +++++++++++++++++++++++------------- include/drm/drm_crtc_helper.h | 10 ++--- 3 files changed, 69 insertions(+), 40 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 8ba22c039a11..733028b4d45e 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -512,8 +512,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (drm_mode_equal(&saved_mode, &crtc->mode)) { if (saved_x != crtc->x || saved_y != crtc->y || depth_changed || bpp_changed) { - crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); + ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, + old_fb); goto done; } } @@ -552,7 +552,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, /* Set up the DPLL and any encoders state that needs to adjust or depend * on the DPLL. */ - crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + if (!ret) + goto done; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -752,6 +754,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, set->y, old_fb)) { + DRM_ERROR("failed to set mode on crtc %p\n", + set->crtc); ret = -EINVAL; goto fail_set_mode; } @@ -765,7 +769,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) old_fb = set->crtc->fb; if (set->crtc->fb != set->fb) set->crtc->fb = set->fb; - crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb); + ret = crtc_funcs->mode_set_base(set->crtc, + set->x, set->y, old_fb); + if (ret != 0) + goto fail_set_mode; } kfree(save_encoders); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a440d0db5ccc..ac92799fa8a1 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -343,7 +343,7 @@ intel_wait_for_vblank(struct drm_device *dev) udelay(20000); } -static void +static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { @@ -361,11 +361,21 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr, alignment; + int ret; /* no fb bound */ if (!crtc->fb) { DRM_DEBUG("No FB bound\n"); - return; + return 0; + } + + switch (pipe) { + case 0: + case 1: + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + return -EINVAL; } intel_fb = to_intel_framebuffer(crtc->fb); @@ -383,20 +393,24 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); - return; + return -EINVAL; default: BUG(); } - if (i915_gem_object_pin(intel_fb->obj, alignment)) - return; - - i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); - - Start = obj_priv->gtt_offset; - Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(intel_fb->obj, alignment); + if (ret != 0) { + mutex_unlock(&dev->struct_mutex); + return ret; + } - I915_WRITE(dspstride, crtc->fb->pitch); + ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); + if (ret != 0) { + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } dspcntr = I915_READ(dspcntr_reg); /* Mask out pixel format bits in case we change it */ @@ -417,11 +431,17 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, break; default: DRM_ERROR("Unknown color depth\n"); - return; + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; } I915_WRITE(dspcntr_reg, dspcntr); + Start = obj_priv->gtt_offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + I915_WRITE(dspstride, crtc->fb->pitch); if (IS_I965G(dev)) { I915_WRITE(dspbase, Offset); I915_READ(dspbase); @@ -438,27 +458,24 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, intel_fb = to_intel_framebuffer(old_fb); i915_gem_object_unpin(intel_fb->obj); } + mutex_unlock(&dev->struct_mutex); if (!dev->primary->master) - return; + return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) - return; + return 0; - switch (pipe) { - case 0: - master_priv->sarea_priv->pipeA_x = x; - master_priv->sarea_priv->pipeA_y = y; - break; - case 1: + if (pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; - break; - default: - DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); - break; + } else { + master_priv->sarea_priv->pipeA_x = x; + master_priv->sarea_priv->pipeA_y = y; } + + return 0; } @@ -706,11 +723,11 @@ static int intel_panel_fitter_pipe (struct drm_device *dev) return 1; } -static void intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) +static int intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -737,6 +754,7 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, bool is_crt = false, is_lvds = false, is_tv = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; + int ret; drm_vblank_pre_modeset(dev, pipe); @@ -777,7 +795,7 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); - return; + return -EINVAL; } fp = clock.n << 16 | clock.m1 << 8 | clock.m2; @@ -948,9 +966,13 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(dspcntr_reg, dspcntr); /* Flush the plane changes */ - intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, old_fb); + if (ret != 0) + return ret; drm_vblank_post_modeset(dev, pipe); + + return 0; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 0c6f0e11b41b..0b0d236c2154 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -54,13 +54,13 @@ struct drm_crtc_helper_funcs { struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); /* Actually set the mode */ - void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb); + int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb); /* Move the crtc on the current fb to the given position *optional* */ - void (*mode_set_base)(struct drm_crtc *crtc, int x, int y, - struct drm_framebuffer *old_fb); + int (*mode_set_base)(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb); }; struct drm_encoder_helper_funcs { -- cgit v1.2.3 From ab00b3e5210954cbaff9207db874a9f03197e3ba Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 11 Feb 2009 14:01:46 -0800 Subject: drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap. This fixes potential fault at fault time if the object was unreferenced while the mapping still existed. Now, while the mmap_offset only lives for the lifetime of the object, the object also stays alive while a vma exists that needs it. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_gem.c | 28 +++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_drv.c | 2 ++ drivers/gpu/drm/i915/i915_gem.c | 43 ++++++++++++++++++++++++----------------- include/drm/drmP.h | 2 ++ 4 files changed, 57 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 5dad6b9d0dec..88d3368ffddd 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -463,6 +463,26 @@ drm_gem_object_handle_free(struct kref *kref) } EXPORT_SYMBOL(drm_gem_object_handle_free); +void drm_gem_vm_open(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + + drm_gem_object_reference(obj); +} +EXPORT_SYMBOL(drm_gem_vm_open); + +void drm_gem_vm_close(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct drm_device *dev = obj->dev; + + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); +} +EXPORT_SYMBOL(drm_gem_vm_close); + + /** * drm_gem_mmap - memory map routine for GEM objects * @filp: DRM file pointer @@ -524,6 +544,14 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) #endif vma->vm_page_prot = __pgprot(prot); + /* Take a ref for this mapping of the object, so that the fault + * handler can dereference the mmap offset's pointer to the object. + * This reference is cleaned up by the corresponding vm_close + * (which should happen whether the vma was created by this call, or + * by a vm_open due to mremap or partial unmap or whatever). + */ + drm_gem_object_reference(obj); + vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open_locked(vma); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index aac12ee31a46..a31cbdbc3c54 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -94,6 +94,8 @@ static int i915_resume(struct drm_device *dev) static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, }; static struct drm_driver driver = { diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 078858178832..ac534c9a2f81 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -607,8 +607,6 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) case -EAGAIN: return VM_FAULT_OOM; case -EFAULT: - case -EBUSY: - DRM_ERROR("can't insert pfn?? fault or busy...\n"); return VM_FAULT_SIGBUS; default: return VM_FAULT_NOPAGE; @@ -684,6 +682,30 @@ out_free_list: return ret; } +static void +i915_gem_free_mmap_offset(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + struct drm_gem_mm *mm = dev->mm_private; + struct drm_map_list *list; + + list = &obj->map_list; + drm_ht_remove_item(&mm->offset_hash, &list->hash); + + if (list->file_offset_node) { + drm_mm_put_block(list->file_offset_node); + list->file_offset_node = NULL; + } + + if (list->map) { + drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER); + list->map = NULL; + } + + obj_priv->mmap_offset = 0; +} + /** * i915_gem_get_gtt_alignment - return required GTT alignment for an object * @obj: object to check @@ -2896,9 +2918,6 @@ int i915_gem_init_object(struct drm_gem_object *obj) void i915_gem_free_object(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - struct drm_gem_mm *mm = dev->mm_private; - struct drm_map_list *list; - struct drm_map *map; struct drm_i915_gem_object *obj_priv = obj->driver_private; while (obj_priv->pin_count > 0) @@ -2909,19 +2928,7 @@ void i915_gem_free_object(struct drm_gem_object *obj) i915_gem_object_unbind(obj); - list = &obj->map_list; - drm_ht_remove_item(&mm->offset_hash, &list->hash); - - if (list->file_offset_node) { - drm_mm_put_block(list->file_offset_node); - list->file_offset_node = NULL; - } - - map = list->map; - if (map) { - drm_free(map, sizeof(*map), DRM_MEM_DRIVER); - list->map = NULL; - } + i915_gem_free_mmap_offset(obj); drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 8190b9bcc2d9..e5f4ae989abf 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1321,6 +1321,8 @@ void drm_gem_object_free(struct kref *kref); struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev, size_t size); void drm_gem_object_handle_free(struct kref *kref); +void drm_gem_vm_open(struct vm_area_struct *vma); +void drm_gem_vm_close(struct vm_area_struct *vma); int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma); static inline void -- cgit v1.2.3 From 3ef0e5ba467366125f04b423f4638baca54a4fc1 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 20 Feb 2009 15:38:41 -0800 Subject: slab: introduce kzfree() kzfree() is a wrapper for kfree() that additionally zeroes the underlying memory before releasing it to the slab allocator. Currently there is code which memset()s the memory region of an object before releasing it back to the slab allocator to make sure security-sensitive data are really zeroed out after use. These callsites can then just use kzfree() which saves some code, makes users greppable and allows for a stupid destructor that isn't necessarily aware of the actual object size. Signed-off-by: Johannes Weiner Reviewed-by: Pekka Enberg Cc: Matt Mackall Acked-by: Christoph Lameter Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 1 + mm/util.c | 20 ++++++++++++++++++++ 2 files changed, 21 insertions(+) (limited to 'include') diff --git a/include/linux/slab.h b/include/linux/slab.h index f96d13c281e8..24c5602bee99 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -127,6 +127,7 @@ int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr); void * __must_check __krealloc(const void *, size_t, gfp_t); void * __must_check krealloc(const void *, size_t, gfp_t); void kfree(const void *); +void kzfree(const void *); size_t ksize(const void *); /* diff --git a/mm/util.c b/mm/util.c index cb00b748ce47..37eaccdf3054 100644 --- a/mm/util.c +++ b/mm/util.c @@ -129,6 +129,26 @@ void *krealloc(const void *p, size_t new_size, gfp_t flags) } EXPORT_SYMBOL(krealloc); +/** + * kzfree - like kfree but zero memory + * @p: object to free memory of + * + * The memory of the object @p points to is zeroed before freed. + * If @p is %NULL, kzfree() does nothing. + */ +void kzfree(const void *p) +{ + size_t ks; + void *mem = (void *)p; + + if (unlikely(ZERO_OR_NULL_PTR(mem))) + return; + ks = ksize(mem); + memset(mem, 0, ks); + kfree(mem); +} +EXPORT_SYMBOL(kzfree); + /* * strndup_user - duplicate an existing string from user space * @s: The string to duplicate -- cgit v1.2.3 From 01b24fee285b098c74318a8be801ef3711ec18d7 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 20 Feb 2009 15:38:49 -0800 Subject: spi_bitbang: add more lowlevel function documentation This adds more documentation of the lowlevel API to avoid future bugs. Signed-off-by: Michael Buesch Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi_bitbang.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index bf8de281b4ed..eed4254bd503 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -83,6 +83,13 @@ extern int spi_bitbang_stop(struct spi_bitbang *spi); * int getmiso(struct spi_device *); * void spidelay(unsigned); * + * setsck()'s is_on parameter is a zero/nonzero boolean. + * + * setmosi()'s is_on parameter is a zero/nonzero boolean. + * + * getmiso() is required to return 0 or 1 only. Any other value is invalid + * and will result in improper operation. + * * A non-inlined routine would call bitbang_txrx_*() routines. The * main loop could easily compile down to a handful of instructions, * especially if the delay is a NOP (to run at peak speed). -- cgit v1.2.3 From b6adea334c6c89d5e6c94f9196bbf3a279cb53bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 20 Feb 2009 15:38:52 -0800 Subject: 8250: fix boot hang with serial console when using with Serial Over Lan port Intel 8257x Ethernet boards have a feature called Serial Over Lan. This feature works by emulating a serial port, and it is detected by kernel as a normal 8250 port. However, this emulation is not perfect, as also noticed on changeset 7500b1f602aad75901774a67a687ee985d85893f. Before this patch, the kernel were trying to check if the serial TX is capable of work using IRQ's. This were done with a code similar this: serial_outp(up, UART_IER, UART_IER_THRI); lsr = serial_in(up, UART_LSR); iir = serial_in(up, UART_IIR); serial_outp(up, UART_IER, 0); if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) up->bugs |= UART_BUG_TXEN; This works fine for other 8250 ports, but, on 8250-emulated SoL port, the chip is a little lazy to down UART_IIR_NO_INT at UART_IIR register. Due to that, UART_BUG_TXEN is sometimes enabled. However, as TX IRQ keeps working, and the TX polling is now enabled, the driver miss-interprets the IRQ received later, hanging up the machine until a key is pressed at the serial console. This is the 6 version of this patch. Previous versions were trying to introduce a large enough delay between serial_outp and serial_in(up, UART_IIR), but not taking forever. However, the needed delay couldn't be safely determined. At the experimental tests, a delay of 1us solves most of the cases, but still hangs sometimes. Increasing the delay to 5us was better, but still doesn't solve. A very high delay of 50 ms seemed to work every time. However, poking around with delays and pray for it to be enough doesn't seem to be a good approach, even for a quirk. So, instead of playing with random large arbitrary delays, let's just disable UART_BUG_TXEN for all SoL ports. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mauro Carvalho Chehab Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 15 +++++++++++++++ drivers/serial/8250_pci.c | 36 ++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 3 +++ include/linux/serial_core.h | 1 + 4 files changed, 55 insertions(+) (limited to 'include') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0d934bfbdd9b..b4b39811b445 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port) serial8250_set_mctrl(&up->port, up->port.mctrl); + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + /* * Do a quick test to see if we receive an * interrupt when we enable the TX irq. @@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port) up->bugs &= ~UART_BUG_TXEN; } +dont_test_tx_en: spin_unlock_irqrestore(&up->port.lock, flags); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 536d8e510f66..533f82025adf 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_inteli960ni_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, /* * ITE */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 114b8192eab9..aca8c458aa8a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2323,6 +2323,9 @@ #define PCI_DEVICE_ID_INTEL_82378 0x0484 #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 +#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062 +#define PCI_DEVICE_ID_INTEL_82573E_SOL 0x1085 +#define PCI_DEVICE_ID_INTEL_82573L_SOL 0x108F #define PCI_DEVICE_ID_INTEL_82815_MC 0x1130 #define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132 #define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 90bbbf0b1161..df9245c7bd3b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -296,6 +296,7 @@ struct uart_port { #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11)) #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13)) #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) +#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) -- cgit v1.2.3 From 216773a787c3c46ef26bf1742c1fdba37d26be45 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 14 Feb 2009 01:59:06 +0100 Subject: Consolidate driver_probe_done() loops into one place there's a few places that currently loop over driver_probe_done(), and I'm about to add another one. This patch abstracts it into a helper to reduce duplication. Signed-off-by: Arjan van de Ven Signed-off-by: Rafael J. Wysocki Cc: Len Brown Acked-by: Greg KH Signed-off-by: Linus Torvalds --- drivers/base/dd.c | 17 +++++++++++++++++ include/linux/device.h | 2 ++ init/do_mounts.c | 13 +++++++++---- init/do_mounts_md.c | 5 +++-- 4 files changed, 31 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 315bed8d5e7f..135231239103 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -18,9 +18,11 @@ */ #include +#include #include #include #include +#include #include "base.h" #include "power/power.h" @@ -167,6 +169,21 @@ int driver_probe_done(void) return 0; } +/** + * wait_for_device_probe + * Wait for device probing to be completed. + * + * Note: this function polls at 100 msec intervals. + */ +int wait_for_device_probe(void) +{ + /* wait for the known devices to complete their probing */ + while (driver_probe_done() != 0) + msleep(100); + async_synchronize_full(); + return 0; +} + /** * driver_probe_device - attempt to bind device & driver together * @drv: driver to bind a device to diff --git a/include/linux/device.h b/include/linux/device.h index 45e5b1921fbb..47f343c7bdda 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -147,6 +147,8 @@ extern void put_driver(struct device_driver *drv); extern struct device_driver *driver_find(const char *name, struct bus_type *bus); extern int driver_probe_done(void); +extern int wait_for_device_probe(void); + /* sysfs interface for exporting driver attributes */ diff --git a/init/do_mounts.c b/init/do_mounts.c index 708105e163df..8d4ff5afc1d8 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -370,10 +370,14 @@ void __init prepare_namespace(void) ssleep(root_delay); } - /* wait for the known devices to complete their probing */ - while (driver_probe_done() != 0) - msleep(100); - async_synchronize_full(); + /* + * wait for the known devices to complete their probing + * + * Note: this is a potential source of long boot delays. + * For example, it is not atypical to wait 5 seconds here + * for the touchpad of a laptop to initialize. + */ + wait_for_device_probe(); md_run_setup(); @@ -399,6 +403,7 @@ void __init prepare_namespace(void) while (driver_probe_done() != 0 || (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) msleep(100); + async_synchronize_full(); } is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c index ff95e3192884..9bdddbcb3d6a 100644 --- a/init/do_mounts_md.c +++ b/init/do_mounts_md.c @@ -281,8 +281,9 @@ static void __init autodetect_raid(void) */ printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n"); printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n"); - while (driver_probe_done() < 0) - msleep(100); + + wait_for_device_probe(); + fd = sys_open("/dev/md0", 0, 0); if (fd >= 0) { sys_ioctl(fd, RAID_AUTORUN, raid_autopart); -- cgit v1.2.3 From 770824bdc421ff58a64db608294323571c949f4c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 22 Feb 2009 18:38:50 +0100 Subject: PM: Split up sysdev_[suspend|resume] from device_power_[down|up] Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- arch/x86/kernel/apm_32.c | 4 ++++ drivers/base/base.h | 2 -- drivers/base/power/main.c | 3 --- drivers/xen/manage.c | 8 ++++++++ include/linux/pm.h | 2 ++ kernel/kexec.c | 7 +++++++ kernel/power/disk.c | 11 +++++++++++ kernel/power/main.c | 8 ++++++-- 8 files changed, 38 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 98807bb095ad..266ec6c18b6c 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1192,6 +1192,7 @@ static int suspend(int vetoable) device_suspend(PMSG_SUSPEND); local_irq_disable(); device_power_down(PMSG_SUSPEND); + sysdev_suspend(PMSG_SUSPEND); local_irq_enable(); @@ -1208,6 +1209,7 @@ static int suspend(int vetoable) if (err != APM_SUCCESS) apm_error("suspend", err); err = (err == APM_SUCCESS) ? 0 : -EIO; + sysdev_resume(); device_power_up(PMSG_RESUME); local_irq_enable(); device_resume(PMSG_RESUME); @@ -1228,6 +1230,7 @@ static void standby(void) local_irq_disable(); device_power_down(PMSG_SUSPEND); + sysdev_suspend(PMSG_SUSPEND); local_irq_enable(); err = set_system_power_state(APM_STATE_STANDBY); @@ -1235,6 +1238,7 @@ static void standby(void) apm_error("standby", err); local_irq_disable(); + sysdev_resume(); device_power_up(PMSG_RESUME); local_irq_enable(); } diff --git a/drivers/base/base.h b/drivers/base/base.h index 0a5f055dffba..9f50f1b545dc 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -88,8 +88,6 @@ extern void driver_detach(struct device_driver *drv); extern int driver_probe_device(struct device_driver *drv, struct device *dev); extern void sysdev_shutdown(void); -extern int sysdev_suspend(pm_message_t state); -extern int sysdev_resume(void); extern char *make_class_name(const char *name, struct kobject *kobj); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 670c9d6c1407..2d14f4ae6c01 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -333,7 +333,6 @@ static void dpm_power_up(pm_message_t state) */ void device_power_up(pm_message_t state) { - sysdev_resume(); dpm_power_up(state); } EXPORT_SYMBOL_GPL(device_power_up); @@ -577,8 +576,6 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } - if (!error) - error = sysdev_suspend(state); if (error) dpm_power_up(resume_event(state)); return error; diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 9b91617b9582..56892a142ee2 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -45,6 +45,13 @@ static int xen_suspend(void *data) err); return err; } + err = sysdev_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n", + err); + device_power_up(PMSG_RESUME); + return err; + } xen_mm_pin_all(); gnttab_suspend(); @@ -61,6 +68,7 @@ static int xen_suspend(void *data) gnttab_resume(); xen_mm_unpin_all(); + sysdev_resume(); device_power_up(PMSG_RESUME); if (!*cancelled) { diff --git a/include/linux/pm.h b/include/linux/pm.h index de2e0a8f6728..24ba5f67b3a3 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -381,10 +381,12 @@ struct dev_pm_info { #ifdef CONFIG_PM_SLEEP extern void device_pm_lock(void); +extern int sysdev_resume(void); extern void device_power_up(pm_message_t state); extern void device_resume(pm_message_t state); extern void device_pm_unlock(void); +extern int sysdev_suspend(pm_message_t state); extern int device_power_down(pm_message_t state); extern int device_suspend(pm_message_t state); extern int device_prepare_suspend(pm_message_t state); diff --git a/kernel/kexec.c b/kernel/kexec.c index 8a6d7b08864e..483899578259 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -1465,6 +1465,11 @@ int kernel_kexec(void) error = device_power_down(PMSG_FREEZE); if (error) goto Enable_irqs; + + /* Suspend system devices */ + error = sysdev_suspend(PMSG_FREEZE); + if (error) + goto Power_up_devices; } else #endif { @@ -1477,6 +1482,8 @@ int kernel_kexec(void) #ifdef CONFIG_KEXEC_JUMP if (kexec_image->preserve_context) { + sysdev_resume(); + Power_up_devices: device_power_up(PMSG_RESTORE); Enable_irqs: local_irq_enable(); diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 7b40e94b1d42..4a4a206b1979 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -227,6 +227,12 @@ static int create_image(int platform_mode) "aborting hibernation\n"); goto Enable_irqs; } + sysdev_suspend(PMSG_FREEZE); + if (error) { + printk(KERN_ERR "PM: Some devices failed to power down, " + "aborting hibernation\n"); + goto Power_up_devices; + } if (hibernation_test(TEST_CORE)) goto Power_up; @@ -242,9 +248,11 @@ static int create_image(int platform_mode) if (!in_suspend) platform_leave(platform_mode); Power_up: + sysdev_resume(); /* NOTE: device_power_up() is just a resume() for devices * that suspended with irqs off ... no overall powerup. */ + Power_up_devices: device_power_up(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); Enable_irqs: @@ -335,6 +343,7 @@ static int resume_target_kernel(void) "aborting resume\n"); goto Enable_irqs; } + sysdev_suspend(PMSG_QUIESCE); /* We'll ignore saved state, but this gets preempt count (etc) right */ save_processor_state(); error = restore_highmem(); @@ -357,6 +366,7 @@ static int resume_target_kernel(void) swsusp_free(); restore_processor_state(); touch_softlockup_watchdog(); + sysdev_resume(); device_power_up(PMSG_RECOVER); Enable_irqs: local_irq_enable(); @@ -440,6 +450,7 @@ int hibernation_platform_enter(void) local_irq_disable(); error = device_power_down(PMSG_HIBERNATE); if (!error) { + sysdev_suspend(PMSG_HIBERNATE); hibernation_ops->enter(); /* We should never get here */ while (1); diff --git a/kernel/power/main.c b/kernel/power/main.c index b4d219016b6c..c9632f841f64 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -298,8 +298,12 @@ static int suspend_enter(suspend_state_t state) goto Done; } - if (!suspend_test(TEST_CORE)) - error = suspend_ops->enter(state); + error = sysdev_suspend(PMSG_SUSPEND); + if (!error) { + if (!suspend_test(TEST_CORE)) + error = suspend_ops->enter(state); + sysdev_resume(); + } device_power_up(PMSG_RESUME); Done: -- cgit v1.2.3 From cd97f39b7cdf1c8a9c9f52865eec795b7f0c811d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 24 Feb 2009 19:19:49 +0100 Subject: i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT The unit in which user-space can set the bus timeout value is jiffies for historical reasons (back when HZ was always 100.) This is however not good because user-space doesn't know how long a jiffy lasts. The timeout value should instead be set in a fixed time unit. Given the original value of HZ, this unit should be 10 ms, for compatibility. Signed-off-by: Jean Delvare Acked-by: Wolfram Sang --- drivers/i2c/i2c-dev.c | 6 +++++- include/linux/i2c-dev.h | 2 +- include/linux/i2c.h | 2 +- 3 files changed, 7 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index c171988a9f51..7e13d2df9af3 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -35,6 +35,7 @@ #include #include #include +#include #include static struct i2c_driver i2cdev_driver; @@ -422,7 +423,10 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) client->adapter->retries = arg; break; case I2C_TIMEOUT: - client->adapter->timeout = arg; + /* For historical reasons, user-space sets the timeout + * value in units of 10 ms. + */ + client->adapter->timeout = msecs_to_jiffies(arg * 10); break; default: /* NOTE: returning a fault code here could cause trouble diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 311315b56b61..fd53bfd26470 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -33,7 +33,7 @@ */ #define I2C_RETRIES 0x0701 /* number of times a device address should be polled when not acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout in jiffies - call with int */ +#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ /* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses * are NOT supported! (due to code brokenness) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index fcfbfea3af72..c86c3b07604c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,7 +361,7 @@ struct i2c_adapter { struct mutex bus_lock; struct mutex clist_lock; - int timeout; + int timeout; /* in jiffies */ int retries; struct device dev; /* the adapter device */ -- cgit v1.2.3 From fe56cf45f951b3810313584605c1d8a4f20b33a4 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:41 -0800 Subject: drm: Fix ordering of bit fields in EDID structure leading huge vsync values. Signed-off-by: Jesse Barnes Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie --- include/drm/drm_edid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index c707c15f5164..ff8d27af4786 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -58,10 +58,10 @@ struct detailed_pixel_timing { u8 hsync_pulse_width_lo; u8 vsync_pulse_width_lo:4; u8 vsync_offset_lo:4; - u8 hsync_pulse_width_hi:2; - u8 hsync_offset_hi:2; u8 vsync_pulse_width_hi:2; u8 vsync_offset_hi:2; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; u8 width_mm_lo; u8 height_mm_lo; u8 height_mm_hi:4; -- cgit v1.2.3 From 7bec756c74b1a5079d5074144bb77a6b3e7d7783 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 16:09:34 -0800 Subject: drm: disable encoders before re-routing them MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some cases we may receive a mode config that has a different CRTC<->encoder map that the current configuration. In that case, we need to disable any re-routed encoders before setting the mode, otherwise they may not pick up the new CRTC (if the output types are incompatible for example). Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 76 ++++++++++++++++++++++++++++++++++++--- include/drm/drm_crtc_helper.h | 1 + 2 files changed, 73 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 733028b4d45e..1c3a8c557140 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -452,6 +452,59 @@ static void drm_setup_crtcs(struct drm_device *dev) kfree(modes); kfree(enabled); } + +/** + * drm_encoder_crtc_ok - can a given crtc drive a given encoder? + * @encoder: encoder to test + * @crtc: crtc to test + * + * Return false if @encoder can't be driven by @crtc, true otherwise. + */ +static bool drm_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + struct drm_device *dev; + struct drm_crtc *tmp; + int crtc_mask = 1; + + WARN(!crtc, "checking null crtc?"); + + dev = crtc->dev; + + list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { + if (tmp == crtc) + break; + crtc_mask <<= 1; + } + + if (encoder->possible_crtcs & crtc_mask) + return true; + return false; +} + +/* + * Check the CRTC we're going to map each output to vs. its current + * CRTC. If they don't match, we have to disable the output and the CRTC + * since the driver will have to re-route things. + */ +static void +drm_crtc_prepare_encoders(struct drm_device *dev) +{ + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_encoder *encoder; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + encoder_funcs = encoder->helper_private; + /* Disable unused encoders */ + if (encoder->crtc == NULL) + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + /* Disable encoders whose CRTC is about to change */ + if (encoder_funcs->get_crtc && + encoder->crtc != (*encoder_funcs->get_crtc)(encoder)) + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + } +} + /** * drm_crtc_set_mode - set a mode * @crtc: CRTC to program @@ -547,6 +600,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, encoder_funcs->prepare(encoder); } + drm_crtc_prepare_encoders(dev); + crtc_funcs->prepare(crtc); /* Set up the DPLL and any encoders state that needs to adjust or depend @@ -617,7 +672,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) struct drm_device *dev; struct drm_crtc **save_crtcs, *new_crtc; struct drm_encoder **save_encoders, *new_encoder; - struct drm_framebuffer *old_fb; + struct drm_framebuffer *old_fb = NULL; bool save_enabled; bool mode_changed = false; bool fb_changed = false; @@ -668,9 +723,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) * and then just flip_or_move it */ if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ - if (set->crtc->fb == NULL) + if (set->crtc->fb == NULL) { + DRM_DEBUG("crtc has no fb, full mode set\n"); mode_changed = true; - else if ((set->fb->bits_per_pixel != + } else if ((set->fb->bits_per_pixel != set->crtc->fb->bits_per_pixel) || set->fb->depth != set->crtc->fb->depth) fb_changed = true; @@ -682,7 +738,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fb_changed = true; if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { - DRM_DEBUG("modes are different\n"); + DRM_DEBUG("modes are different, full mode set\n"); drm_mode_debug_printmodeline(&set->crtc->mode); drm_mode_debug_printmodeline(set->mode); mode_changed = true; @@ -708,6 +764,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) } if (new_encoder != connector->encoder) { + DRM_DEBUG("encoder changed, full mode switch\n"); mode_changed = true; connector->encoder = new_encoder; } @@ -734,10 +791,20 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (set->connectors[ro] == connector) new_crtc = set->crtc; } + + /* Make sure the new CRTC will work with the encoder */ + if (new_crtc && + !drm_encoder_crtc_ok(connector->encoder, new_crtc)) { + ret = -EINVAL; + goto fail_set_mode; + } if (new_crtc != connector->encoder->crtc) { + DRM_DEBUG("crtc changed, full mode switch\n"); mode_changed = true; connector->encoder->crtc = new_crtc; } + DRM_DEBUG("setting connector %d crtc to %p\n", + connector->base.id, new_crtc); } /* mode_set_base is not a required function */ @@ -781,6 +848,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fail_set_mode: set->crtc->enabled = save_enabled; + set->crtc->fb = old_fb; count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (!connector->encoder) diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 0b0d236c2154..c7d4b2e606a5 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -76,6 +76,7 @@ struct drm_encoder_helper_funcs { void (*mode_set)(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); + struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder); /* detect for DAC style encoders */ enum drm_connector_status (*detect)(struct drm_encoder *encoder, struct drm_connector *connector); -- cgit v1.2.3 From 4ab0d47d0ab311eb181532c1ecb6d02905685071 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 24 Feb 2009 17:35:12 -0800 Subject: gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t io_mapping_create_wc should take a resource_size_t parameter in place of unsigned long. With unsigned long, there will be no way to map greater than 4GB address in i386/32 bit. On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return error for such a case. Patch also adds a structure for io_mapping, that saves the base, size and type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on io_mapping_map calls. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Cc: Dave Airlie Cc: Jesse Barnes Cc: Eric Anholt Cc: Keith Packard Signed-off-by: Ingo Molnar --- arch/x86/include/asm/iomap.h | 3 +++ arch/x86/mm/iomap_32.c | 18 +++++++++++++++++ include/linux/io-mapping.h | 46 +++++++++++++++++++++++++++++++++----------- 3 files changed, 56 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h index c1f06289b14b..86af26091d6c 100644 --- a/arch/x86/include/asm/iomap.h +++ b/arch/x86/include/asm/iomap.h @@ -23,6 +23,9 @@ #include #include +int +is_io_mapping_possible(resource_size_t base, unsigned long size); + void * iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c index ca53224fc56c..6c2b1af16926 100644 --- a/arch/x86/mm/iomap_32.c +++ b/arch/x86/mm/iomap_32.c @@ -20,6 +20,24 @@ #include #include +#ifdef CONFIG_X86_PAE +int +is_io_mapping_possible(resource_size_t base, unsigned long size) +{ + return 1; +} +#else +int +is_io_mapping_possible(resource_size_t base, unsigned long size) +{ + /* There is no way to map greater than 1 << 32 address without PAE */ + if (base + size > 0x100000000ULL) + return 0; + + return 1; +} +#endif + /* Map 'pfn' using fixed map 'type' and protections 'prot' */ void * diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 82df31726a54..cbc2f0cd631b 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -30,11 +30,14 @@ * See Documentation/io_mapping.txt */ -/* this struct isn't actually defined anywhere */ -struct io_mapping; - #ifdef CONFIG_HAVE_ATOMIC_IOMAP +struct io_mapping { + resource_size_t base; + unsigned long size; + pgprot_t prot; +}; + /* * For small address space machines, mapping large objects * into the kernel virtual space isn't practical. Where @@ -43,23 +46,40 @@ struct io_mapping; */ static inline struct io_mapping * -io_mapping_create_wc(unsigned long base, unsigned long size) +io_mapping_create_wc(resource_size_t base, unsigned long size) { - return (struct io_mapping *) base; + struct io_mapping *iomap; + + if (!is_io_mapping_possible(base, size)) + return NULL; + + iomap = kmalloc(sizeof(*iomap), GFP_KERNEL); + if (!iomap) + return NULL; + + iomap->base = base; + iomap->size = size; + iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL)); + return iomap; } static inline void io_mapping_free(struct io_mapping *mapping) { + kfree(mapping); } /* Atomic map/unmap */ static inline void * io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0, - __pgprot(__PAGE_KERNEL_WC)); + resource_size_t phys_addr; + unsigned long pfn; + + BUG_ON(offset >= mapping->size); + phys_addr = mapping->base + offset; + pfn = (unsigned long) (phys_addr >> PAGE_SHIFT); + return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot); } static inline void @@ -71,8 +91,9 @@ io_mapping_unmap_atomic(void *vaddr) static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return ioremap_wc(offset, PAGE_SIZE); + BUG_ON(offset >= mapping->size); + resource_size_t phys_addr = mapping->base + offset; + return ioremap_wc(phys_addr, PAGE_SIZE); } static inline void @@ -83,9 +104,12 @@ io_mapping_unmap(void *vaddr) #else +/* this struct isn't actually defined anywhere */ +struct io_mapping; + /* Create the io_mapping object*/ static inline struct io_mapping * -io_mapping_create_wc(unsigned long base, unsigned long size) +io_mapping_create_wc(resource_size_t base, unsigned long size) { return (struct io_mapping *) ioremap_wc(base, size); } -- cgit v1.2.3 From 8fed43684174b68f04d01d1210fd00536af790df Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:24 +0100 Subject: ide: fix refcounting in device drivers During host driver module removal del_gendisk() results in a final put on drive->gendev and freeing the drive by drive_release_dev(). Convert device drivers from using struct kref to use struct device so device driver's object holds reference on ->gendev and prevents drive from prematurely going away. Also fix ->remove methods to not erroneously drop reference on a host driver by using only put_device() instead of ide*_put(). Reported-by: Stanislaw Gruszka Tested-by: Stanislaw Gruszka Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 27 ++++++++++++++++++--------- drivers/ide/ide-cd.h | 2 +- drivers/ide/ide-gd.c | 26 +++++++++++++++++--------- drivers/ide/ide-gd.h | 2 +- drivers/ide/ide-tape.c | 29 +++++++++++++++++++---------- include/linux/ide.h | 2 +- 6 files changed, 57 insertions(+), 31 deletions(-) (limited to 'include') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 690475b834de..ddfbea41d296 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -55,7 +55,7 @@ static DEFINE_MUTEX(idecd_ref_mutex); -static void ide_cd_release(struct kref *); +static void ide_cd_release(struct device *); static struct cdrom_info *ide_cd_get(struct gendisk *disk) { @@ -67,7 +67,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk) if (ide_device_get(cd->drive)) cd = NULL; else - kref_get(&cd->kref); + get_device(&cd->dev); } mutex_unlock(&idecd_ref_mutex); @@ -79,7 +79,7 @@ static void ide_cd_put(struct cdrom_info *cd) ide_drive_t *drive = cd->drive; mutex_lock(&idecd_ref_mutex); - kref_put(&cd->kref, ide_cd_release); + put_device(&cd->dev); ide_device_put(drive); mutex_unlock(&idecd_ref_mutex); } @@ -1798,15 +1798,17 @@ static void ide_cd_remove(ide_drive_t *drive) ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); ide_proc_unregister_driver(drive, info->driver); - + device_del(&info->dev); del_gendisk(info->disk); - ide_cd_put(info); + mutex_lock(&idecd_ref_mutex); + put_device(&info->dev); + mutex_unlock(&idecd_ref_mutex); } -static void ide_cd_release(struct kref *kref) +static void ide_cd_release(struct device *dev) { - struct cdrom_info *info = to_ide_drv(kref, cdrom_info); + struct cdrom_info *info = to_ide_drv(dev, cdrom_info); struct cdrom_device_info *devinfo = &info->devinfo; ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; @@ -2005,7 +2007,12 @@ static int ide_cd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&info->kref); + info->dev.parent = &drive->gendev; + info->dev.release = ide_cd_release; + dev_set_name(&info->dev, dev_name(&drive->gendev)); + + if (device_register(&info->dev)) + goto out_free_disk; info->drive = drive; info->driver = &ide_cdrom_driver; @@ -2019,7 +2026,7 @@ static int ide_cd_probe(ide_drive_t *drive) g->driverfs_dev = &drive->gendev; g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { - ide_cd_release(&info->kref); + put_device(&info->dev); goto failed; } @@ -2029,6 +2036,8 @@ static int ide_cd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_cd: kfree(info); failed: diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index ac40d6cb90a2..c878bfcf1116 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -80,7 +80,7 @@ struct cdrom_info { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* Buffer for table of contents. NULL if we haven't allocated a TOC buffer for this device yet. */ diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7857b209c6df..047109419902 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -25,7 +25,7 @@ module_param(debug_mask, ulong, 0644); static DEFINE_MUTEX(ide_disk_ref_mutex); -static void ide_disk_release(struct kref *); +static void ide_disk_release(struct device *); static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) { @@ -37,7 +37,7 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) if (ide_device_get(idkp->drive)) idkp = NULL; else - kref_get(&idkp->kref); + get_device(&idkp->dev); } mutex_unlock(&ide_disk_ref_mutex); return idkp; @@ -48,7 +48,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp) ide_drive_t *drive = idkp->drive; mutex_lock(&ide_disk_ref_mutex); - kref_put(&idkp->kref, ide_disk_release); + put_device(&idkp->dev); ide_device_put(drive); mutex_unlock(&ide_disk_ref_mutex); } @@ -66,17 +66,18 @@ static void ide_gd_remove(ide_drive_t *drive) struct gendisk *g = idkp->disk; ide_proc_unregister_driver(drive, idkp->driver); - + device_del(&idkp->dev); del_gendisk(g); - drive->disk_ops->flush(drive); - ide_disk_put(idkp); + mutex_lock(&ide_disk_ref_mutex); + put_device(&idkp->dev); + mutex_unlock(&ide_disk_ref_mutex); } -static void ide_disk_release(struct kref *kref) +static void ide_disk_release(struct device *dev) { - struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj); + struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj); ide_drive_t *drive = idkp->drive; struct gendisk *g = idkp->disk; @@ -348,7 +349,12 @@ static int ide_gd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&idkp->kref); + idkp->dev.parent = &drive->gendev; + idkp->dev.release = ide_disk_release; + dev_set_name(&idkp->dev, dev_name(&drive->gendev)); + + if (device_register(&idkp->dev)) + goto out_free_disk; idkp->drive = drive; idkp->driver = &ide_gd_driver; @@ -373,6 +379,8 @@ static int ide_gd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_idkp: kfree(idkp); failed: diff --git a/drivers/ide/ide-gd.h b/drivers/ide/ide-gd.h index a86779f0756b..b604bdd318a1 100644 --- a/drivers/ide/ide-gd.h +++ b/drivers/ide/ide-gd.h @@ -17,7 +17,7 @@ struct ide_disk_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; unsigned int openers; /* protected by BKL for now */ /* Last failed packet command */ diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d7ecd3c79757..bb450a7608c2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -169,7 +169,7 @@ typedef struct ide_tape_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* * failed_pc points to the last failed packet command, or contains @@ -267,7 +267,7 @@ static DEFINE_MUTEX(idetape_ref_mutex); static struct class *idetape_sysfs_class; -static void ide_tape_release(struct kref *); +static void ide_tape_release(struct device *); static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) { @@ -279,7 +279,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) if (ide_device_get(tape->drive)) tape = NULL; else - kref_get(&tape->kref); + get_device(&tape->dev); } mutex_unlock(&idetape_ref_mutex); return tape; @@ -290,7 +290,7 @@ static void ide_tape_put(struct ide_tape_obj *tape) ide_drive_t *drive = tape->drive; mutex_lock(&idetape_ref_mutex); - kref_put(&tape->kref, ide_tape_release); + put_device(&tape->dev); ide_device_put(drive); mutex_unlock(&idetape_ref_mutex); } @@ -308,7 +308,7 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) mutex_lock(&idetape_ref_mutex); tape = idetape_devs[i]; if (tape) - kref_get(&tape->kref); + get_device(&tape->dev); mutex_unlock(&idetape_ref_mutex); return tape; } @@ -2256,15 +2256,17 @@ static void ide_tape_remove(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; ide_proc_unregister_driver(drive, tape->driver); - + device_del(&tape->dev); ide_unregister_region(tape->disk); - ide_tape_put(tape); + mutex_lock(&idetape_ref_mutex); + put_device(&tape->dev); + mutex_unlock(&idetape_ref_mutex); } -static void ide_tape_release(struct kref *kref) +static void ide_tape_release(struct device *dev) { - struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj); + struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj); ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; @@ -2407,7 +2409,12 @@ static int ide_tape_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&tape->kref); + tape->dev.parent = &drive->gendev; + tape->dev.release = ide_tape_release; + dev_set_name(&tape->dev, dev_name(&drive->gendev)); + + if (device_register(&tape->dev)) + goto out_free_disk; tape->drive = drive; tape->driver = &idetape_driver; @@ -2436,6 +2443,8 @@ static int ide_tape_probe(ide_drive_t *drive) return 0; +out_free_disk: + put_disk(g); out_free_tape: kfree(tape); failed: diff --git a/include/linux/ide.h b/include/linux/ide.h index 194da5a4b0d6..fe235b65207e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -663,7 +663,7 @@ typedef struct ide_drive_s ide_drive_t; #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev) #define to_ide_drv(obj, cont_type) \ - container_of(obj, struct cont_type, kref) + container_of(obj, struct cont_type, dev) #define ide_drv_g(disk, cont_type) \ container_of((disk)->private_data, struct cont_type, driver) -- cgit v1.2.3 From a682604838763981613e42015cd0e39f2989d6bb Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 25 Feb 2009 18:03:42 -0800 Subject: rcu: Teach RCU that idle task is not quiscent state at boot This patch fixes a bug located by Vegard Nossum with the aid of kmemcheck, updated based on review comments from Nick Piggin, Ingo Molnar, and Andrew Morton. And cleans up the variable-name and function-name language. ;-) The boot CPU runs in the context of its idle thread during boot-up. During this time, idle_cpu(0) will always return nonzero, which will fool Classic and Hierarchical RCU into deciding that a large chunk of the boot-up sequence is a big long quiescent state. This in turn causes RCU to prematurely end grace periods during this time. This patch changes the rcutree.c and rcuclassic.c rcu_check_callbacks() function to ignore the idle task as a quiescent state until the system has started up the scheduler in rest_init(), introducing a new non-API function rcu_idle_now_means_idle() to inform RCU of this transition. RCU maintains an internal rcu_idle_cpu_truthful variable to track this state, which is then used by rcu_check_callback() to determine if it should believe idle_cpu(). Because this patch has the effect of disallowing RCU grace periods during long stretches of the boot-up sequence, this patch also introduces Josh Triplett's UP-only optimization that makes synchronize_rcu() be a no-op if num_online_cpus() returns 1. This allows boot-time code that calls synchronize_rcu() to proceed normally. Note, however, that RCU callbacks registered by call_rcu() will likely queue up until later in the boot sequence. Although rcuclassic and rcutree can also use this same optimization after boot completes, rcupreempt must restrict its use of this optimization to the portion of the boot sequence before the scheduler starts up, given that an rcupreempt RCU read-side critical section may be preeempted. In addition, this patch takes Nick Piggin's suggestion to make the system_state global variable be __read_mostly. Changes since v4: o Changes the name of the introduced function and variable to be less emotional. ;-) Changes since v3: o WARN_ON(nr_context_switches() > 0) to verify that RCU switches out of boot-time mode before the first context switch, as suggested by Nick Piggin. Changes since v2: o Created rcu_blocking_is_gp() internal-to-RCU API that determines whether a call to synchronize_rcu() is itself a grace period. o The definition of rcu_blocking_is_gp() for rcuclassic and rcutree checks to see if but a single CPU is online. o The definition of rcu_blocking_is_gp() for rcupreempt checks to see both if but a single CPU is online and if the system is still in early boot. This allows rcupreempt to again work correctly if running on a single CPU after booting is complete. o Added check to rcupreempt's synchronize_sched() for there being but one online CPU. Tested all three variants both SMP and !SMP, booted fine, passed a short rcutorture test on both x86 and Power. Located-by: Vegard Nossum Tested-by: Vegard Nossum Tested-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- include/linux/rcuclassic.h | 6 ++++++ include/linux/rcupdate.h | 4 ++++ include/linux/rcupreempt.h | 15 +++++++++++++++ include/linux/rcutree.h | 6 ++++++ init/main.c | 3 ++- kernel/rcuclassic.c | 4 ++-- kernel/rcupdate.c | 12 ++++++++++++ kernel/rcupreempt.c | 3 +++ kernel/rcutree.c | 4 ++-- 9 files changed, 52 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h index f3f697df1d71..80044a4f3ab9 100644 --- a/include/linux/rcuclassic.h +++ b/include/linux/rcuclassic.h @@ -181,4 +181,10 @@ extern long rcu_batches_completed_bh(void); #define rcu_enter_nohz() do { } while (0) #define rcu_exit_nohz() do { } while (0) +/* A context switch is a grace period for rcuclassic. */ +static inline int rcu_blocking_is_gp(void) +{ + return num_online_cpus() == 1; +} + #endif /* __LINUX_RCUCLASSIC_H */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 921340a7b71c..528343e6da51 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -52,6 +52,9 @@ struct rcu_head { void (*func)(struct rcu_head *head); }; +/* Internal to kernel, but needed by rcupreempt.h. */ +extern int rcu_scheduler_active; + #if defined(CONFIG_CLASSIC_RCU) #include #elif defined(CONFIG_TREE_RCU) @@ -265,6 +268,7 @@ extern void rcu_barrier_sched(void); /* Internal to kernel */ extern void rcu_init(void); +extern void rcu_scheduler_starting(void); extern int rcu_needs_cpu(int cpu); #endif /* __LINUX_RCUPDATE_H */ diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h index 3e05c09b54a2..74304b4538d8 100644 --- a/include/linux/rcupreempt.h +++ b/include/linux/rcupreempt.h @@ -142,4 +142,19 @@ static inline void rcu_exit_nohz(void) #define rcu_exit_nohz() do { } while (0) #endif /* CONFIG_NO_HZ */ +/* + * A context switch is a grace period for rcupreempt synchronize_rcu() + * only during early boot, before the scheduler has been initialized. + * So, how the heck do we get a context switch? Well, if the caller + * invokes synchronize_rcu(), they are willing to accept a context + * switch, so we simply pretend that one happened. + * + * After boot, there might be a blocked or preempted task in an RCU + * read-side critical section, so we cannot then take the fastpath. + */ +static inline int rcu_blocking_is_gp(void) +{ + return num_online_cpus() == 1 && !rcu_scheduler_active; +} + #endif /* __LINUX_RCUPREEMPT_H */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index d4368b7975c3..a722fb67bb2d 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -326,4 +326,10 @@ static inline void rcu_exit_nohz(void) } #endif /* CONFIG_NO_HZ */ +/* A context switch is a grace period for rcutree. */ +static inline int rcu_blocking_is_gp(void) +{ + return num_online_cpus() == 1; +} + #endif /* __LINUX_RCUTREE_H */ diff --git a/init/main.c b/init/main.c index 844209453c02..83697e160b3a 100644 --- a/init/main.c +++ b/init/main.c @@ -97,7 +97,7 @@ static inline void mark_rodata_ro(void) { } extern void tc_init(void); #endif -enum system_states system_state; +enum system_states system_state __read_mostly; EXPORT_SYMBOL(system_state); /* @@ -463,6 +463,7 @@ static noinline void __init_refok rest_init(void) * at least once to get things moving: */ init_idle_bootup_task(current); + rcu_scheduler_starting(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index bd5a9003497c..654c640a6b9c 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -679,8 +679,8 @@ int rcu_needs_cpu(int cpu) void rcu_check_callbacks(int cpu, int user) { if (user || - (idle_cpu(cpu) && !in_softirq() && - hardirq_count() <= (1 << HARDIRQ_SHIFT))) { + (idle_cpu(cpu) && rcu_scheduler_active && + !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) { /* * Get here if this CPU took its interrupt from user diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index d92a76a881aa..cae8a059cf47 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -44,6 +44,7 @@ #include #include #include +#include enum rcu_barrier { RCU_BARRIER_STD, @@ -55,6 +56,7 @@ static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL}; static atomic_t rcu_barrier_cpu_count; static DEFINE_MUTEX(rcu_barrier_mutex); static struct completion rcu_barrier_completion; +int rcu_scheduler_active __read_mostly; /* * Awaken the corresponding synchronize_rcu() instance now that a @@ -80,6 +82,10 @@ void wakeme_after_rcu(struct rcu_head *head) void synchronize_rcu(void) { struct rcu_synchronize rcu; + + if (rcu_blocking_is_gp()) + return; + init_completion(&rcu.completion); /* Will wake me after RCU finished. */ call_rcu(&rcu.head, wakeme_after_rcu); @@ -175,3 +181,9 @@ void __init rcu_init(void) __rcu_init(); } +void rcu_scheduler_starting(void) +{ + WARN_ON(num_online_cpus() != 1); + WARN_ON(nr_context_switches() > 0); + rcu_scheduler_active = 1; +} diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 33cfc50781f9..5d59e850fb71 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -1181,6 +1181,9 @@ void __synchronize_sched(void) { struct rcu_synchronize rcu; + if (num_online_cpus() == 1) + return; /* blocking is gp if only one CPU! */ + init_completion(&rcu.completion); /* Will wake me after RCU finished. */ call_rcu_sched(&rcu.head, wakeme_after_rcu); diff --git a/kernel/rcutree.c b/kernel/rcutree.c index b2fd602a6f6f..97ce31579ec0 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -948,8 +948,8 @@ static void rcu_do_batch(struct rcu_data *rdp) void rcu_check_callbacks(int cpu, int user) { if (user || - (idle_cpu(cpu) && !in_softirq() && - hardirq_count() <= (1 << HARDIRQ_SHIFT))) { + (idle_cpu(cpu) && rcu_scheduler_active && + !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) { /* * Get here if this CPU took its interrupt from user -- cgit v1.2.3 From 1e42807918d17e8c93bf14fbb74be84b141334c1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Feb 2009 09:03:10 +0100 Subject: block: reduce stack footprint of blk_recount_segments() blk_recalc_rq_segments() requires a request structure passed in, which we don't have from blk_recount_segments(). So the latter allocates one on the stack, using > 400 bytes of stack for that. This can cause us to spill over one page of stack from ext4 at least: 0) 4560 400 blk_recount_segments+0x43/0x62 1) 4160 32 bio_phys_segments+0x1c/0x24 2) 4128 32 blk_rq_bio_prep+0x2a/0xf9 3) 4096 32 init_request_from_bio+0xf9/0xfe 4) 4064 112 __make_request+0x33c/0x3f6 5) 3952 144 generic_make_request+0x2d1/0x321 6) 3808 64 submit_bio+0xb9/0xc3 7) 3744 48 submit_bh+0xea/0x10e 8) 3696 368 ext4_mb_init_cache+0x257/0xa6a [ext4] 9) 3328 288 ext4_mb_regular_allocator+0x421/0xcd9 [ext4] 10) 3040 160 ext4_mb_new_blocks+0x211/0x4b4 [ext4] 11) 2880 336 ext4_ext_get_blocks+0xb61/0xd45 [ext4] 12) 2544 96 ext4_get_blocks_wrap+0xf2/0x200 [ext4] 13) 2448 80 ext4_da_get_block_write+0x6e/0x16b [ext4] 14) 2368 352 mpage_da_map_blocks+0x7e/0x4b3 [ext4] 15) 2016 352 ext4_da_writepages+0x2ce/0x43c [ext4] 16) 1664 32 do_writepages+0x2d/0x3c 17) 1632 144 __writeback_single_inode+0x162/0x2cd 18) 1488 96 generic_sync_sb_inodes+0x1e3/0x32b 19) 1392 16 sync_sb_inodes+0xe/0x10 20) 1376 48 writeback_inodes+0x69/0xb3 21) 1328 208 balance_dirty_pages_ratelimited_nr+0x187/0x2f9 22) 1120 224 generic_file_buffered_write+0x1d4/0x2c4 23) 896 176 __generic_file_aio_write_nolock+0x35f/0x393 24) 720 80 generic_file_aio_write+0x6c/0xc8 25) 640 80 ext4_file_write+0xa9/0x137 [ext4] 26) 560 320 do_sync_write+0xf0/0x137 27) 240 48 vfs_write+0xb3/0x13c 28) 192 64 sys_write+0x4c/0x74 29) 128 128 system_call_fastpath+0x16/0x1b Split the segment counting out into a __blk_recalc_rq_segments() helper to avoid allocating an onstack request just for checking the physical segment count. Signed-off-by: Jens Axboe --- block/blk-merge.c | 94 ++++++++++++++++++++++++++++---------------------- include/linux/blkdev.h | 2 ++ 2 files changed, 55 insertions(+), 41 deletions(-) (limited to 'include') diff --git a/block/blk-merge.c b/block/blk-merge.c index b92f5b0866b0..a104593e70c3 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -38,72 +38,84 @@ void blk_recalc_rq_sectors(struct request *rq, int nsect) } } -void blk_recalc_rq_segments(struct request *rq) +static unsigned int __blk_recalc_rq_segments(struct request_queue *q, + struct bio *bio, + unsigned int *seg_size_ptr) { - int nr_phys_segs; unsigned int phys_size; struct bio_vec *bv, *bvprv = NULL; - int seg_size; - int cluster; - struct req_iterator iter; - int high, highprv = 1; - struct request_queue *q = rq->q; + int cluster, i, high, highprv = 1; + unsigned int seg_size, nr_phys_segs; + struct bio *fbio; - if (!rq->bio) - return; + if (!bio) + return 0; + fbio = bio; cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); seg_size = 0; phys_size = nr_phys_segs = 0; - rq_for_each_segment(bv, rq, iter) { - /* - * the trick here is making sure that a high page is never - * considered part of another segment, since that might - * change with the bounce page. - */ - high = page_to_pfn(bv->bv_page) > q->bounce_pfn; - if (high || highprv) - goto new_segment; - if (cluster) { - if (seg_size + bv->bv_len > q->max_segment_size) - goto new_segment; - if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv)) - goto new_segment; - if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv)) + for_each_bio(bio) { + bio_for_each_segment(bv, bio, i) { + /* + * the trick here is making sure that a high page is + * never considered part of another segment, since that + * might change with the bounce page. + */ + high = page_to_pfn(bv->bv_page) > q->bounce_pfn; + if (high || highprv) goto new_segment; + if (cluster) { + if (seg_size + bv->bv_len > q->max_segment_size) + goto new_segment; + if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv)) + goto new_segment; + if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv)) + goto new_segment; + + seg_size += bv->bv_len; + bvprv = bv; + continue; + } +new_segment: + if (nr_phys_segs == 1 && seg_size > + fbio->bi_seg_front_size) + fbio->bi_seg_front_size = seg_size; - seg_size += bv->bv_len; + nr_phys_segs++; bvprv = bv; - continue; + seg_size = bv->bv_len; + highprv = high; } -new_segment: - if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) - rq->bio->bi_seg_front_size = seg_size; - - nr_phys_segs++; - bvprv = bv; - seg_size = bv->bv_len; - highprv = high; } - if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) + if (seg_size_ptr) + *seg_size_ptr = seg_size; + + return nr_phys_segs; +} + +void blk_recalc_rq_segments(struct request *rq) +{ + unsigned int seg_size = 0, phys_segs; + + phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size); + + if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) rq->bio->bi_seg_front_size = seg_size; if (seg_size > rq->biotail->bi_seg_back_size) rq->biotail->bi_seg_back_size = seg_size; - rq->nr_phys_segments = nr_phys_segs; + rq->nr_phys_segments = phys_segs; } void blk_recount_segments(struct request_queue *q, struct bio *bio) { - struct request rq; struct bio *nxt = bio->bi_next; - rq.q = q; - rq.bio = rq.biotail = bio; + bio->bi_next = NULL; - blk_recalc_rq_segments(&rq); + bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL); bio->bi_next = nxt; - bio->bi_phys_segments = rq.nr_phys_segments; bio->bi_flags |= (1 << BIO_SEG_VALID); } EXPORT_SYMBOL(blk_recount_segments); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index dcaa0fd84b02..465d6babc847 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -708,6 +708,8 @@ struct req_iterator { }; /* This should not be used directly - use rq_for_each_segment */ +#define for_each_bio(_bio) \ + for (; _bio; _bio = _bio->bi_next) #define __rq_for_each_bio(_bio, rq) \ if ((rq->bio)) \ for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next) -- cgit v1.2.3 From 54e991242850edc8c53f71fa5aa3ba7a93ce38f5 Mon Sep 17 00:00:00 2001 From: Dhaval Giani Date: Fri, 27 Feb 2009 15:13:54 +0530 Subject: sched: don't allow setuid to succeed if the user does not have rt bandwidth Impact: fix hung task with certain (non-default) rt-limit settings Corey Hickey reported that on using setuid to change the uid of a rt process, the process would be unkillable and not be running. This is because there was no rt runtime for that user group. Add in a check to see if a user can attach an rt task to its task group. On failure, return EINVAL, which is also returned in CONFIG_CGROUP_SCHED. Reported-by: Corey Hickey Signed-off-by: Dhaval Giani Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 ++++ kernel/sched.c | 13 +++++++++++-- kernel/sys.c | 31 ++++++++++++++++++++----------- kernel/user.c | 18 ++++++++++++++++++ 4 files changed, 53 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8981e52c714f..8c216e057c94 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2291,9 +2291,13 @@ extern long sched_group_rt_runtime(struct task_group *tg); extern int sched_group_set_rt_period(struct task_group *tg, long rt_period_us); extern long sched_group_rt_period(struct task_group *tg); +extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk); #endif #endif +extern int task_can_switch_user(struct user_struct *up, + struct task_struct *tsk); + #ifdef CONFIG_TASK_XACCT static inline void add_rchar(struct task_struct *tsk, ssize_t amt) { diff --git a/kernel/sched.c b/kernel/sched.c index c3baa9653d1d..8e2558c2ba67 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9224,6 +9224,16 @@ static int sched_rt_global_constraints(void) return ret; } + +int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk) +{ + /* Don't accept realtime tasks when there is no way for them to run */ + if (rt_task(tsk) && tg->rt_bandwidth.rt_runtime == 0) + return 0; + + return 1; +} + #else /* !CONFIG_RT_GROUP_SCHED */ static int sched_rt_global_constraints(void) { @@ -9317,8 +9327,7 @@ cpu_cgroup_can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, struct task_struct *tsk) { #ifdef CONFIG_RT_GROUP_SCHED - /* Don't accept realtime tasks when there is no way for them to run */ - if (rt_task(tsk) && cgroup_tg(cgrp)->rt_bandwidth.rt_runtime == 0) + if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk)) return -EINVAL; #else /* We don't support RT-tasks being in separate groups */ diff --git a/kernel/sys.c b/kernel/sys.c index f145c415bc16..37f458e6882a 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -559,7 +559,7 @@ error: abort_creds(new); return retval; } - + /* * change the user struct in a credentials set to match the new UID */ @@ -571,6 +571,11 @@ static int set_user(struct cred *new) if (!new_user) return -EAGAIN; + if (!task_can_switch_user(new_user, current)) { + free_uid(new_user); + return -EINVAL; + } + if (atomic_read(&new_user->processes) >= current->signal->rlim[RLIMIT_NPROC].rlim_cur && new_user != INIT_USER) { @@ -631,10 +636,11 @@ SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid) goto error; } - retval = -EAGAIN; - if (new->uid != old->uid && set_user(new) < 0) - goto error; - + if (new->uid != old->uid) { + retval = set_user(new); + if (retval < 0) + goto error; + } if (ruid != (uid_t) -1 || (euid != (uid_t) -1 && euid != old->uid)) new->suid = new->euid; @@ -680,9 +686,10 @@ SYSCALL_DEFINE1(setuid, uid_t, uid) retval = -EPERM; if (capable(CAP_SETUID)) { new->suid = new->uid = uid; - if (uid != old->uid && set_user(new) < 0) { - retval = -EAGAIN; - goto error; + if (uid != old->uid) { + retval = set_user(new); + if (retval < 0) + goto error; } } else if (uid != old->uid && uid != new->suid) { goto error; @@ -734,11 +741,13 @@ SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid) goto error; } - retval = -EAGAIN; if (ruid != (uid_t) -1) { new->uid = ruid; - if (ruid != old->uid && set_user(new) < 0) - goto error; + if (ruid != old->uid) { + retval = set_user(new); + if (retval < 0) + goto error; + } } if (euid != (uid_t) -1) new->euid = euid; diff --git a/kernel/user.c b/kernel/user.c index 3551ac742395..6a9b696128c8 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -362,6 +362,24 @@ static void free_user(struct user_struct *up, unsigned long flags) #endif +#if defined(CONFIG_RT_GROUP_SCHED) && defined(CONFIG_USER_SCHED) +/* + * We need to check if a setuid can take place. This function should be called + * before successfully completing the setuid. + */ +int task_can_switch_user(struct user_struct *up, struct task_struct *tsk) +{ + + return sched_rt_can_attach(up->tg, tsk); + +} +#else +int task_can_switch_user(struct user_struct *up, struct task_struct *tsk) +{ + return 1; +} +#endif + /* * Locate the user_struct for the passed UID. If found, take a ref on it. The * caller must undo that ref with free_uid(). -- cgit v1.2.3 From 5170836679185357dc1b7660bad13287b39e1e33 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 27 Feb 2009 14:03:03 -0800 Subject: Fix recursive lock in free_uid()/free_user_ns() free_uid() and free_user_ns() are corecursive when CONFIG_USER_SCHED=n, but free_user_ns() is called from free_uid() by way of uid_hash_remove(), which requires uidhash_lock to be held. free_user_ns() then calls free_uid() to complete the destruction. Fix this by deferring the destruction of the user_namespace. Signed-off-by: David Howells Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/user_namespace.h | 1 + kernel/user_namespace.c | 21 +++++++++++++++++---- 2 files changed, 18 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index 315bcd375224..cc4f45361dbb 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -13,6 +13,7 @@ struct user_namespace { struct kref kref; struct hlist_head uidhash_table[UIDHASH_SZ]; struct user_struct *creator; + struct work_struct destroyer; }; extern struct user_namespace init_user_ns; diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 79084311ee57..076c7c8215b0 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -60,12 +60,25 @@ int create_user_ns(struct cred *new) return 0; } -void free_user_ns(struct kref *kref) +/* + * Deferred destructor for a user namespace. This is required because + * free_user_ns() may be called with uidhash_lock held, but we need to call + * back to free_uid() which will want to take the lock again. + */ +static void free_user_ns_work(struct work_struct *work) { - struct user_namespace *ns; - - ns = container_of(kref, struct user_namespace, kref); + struct user_namespace *ns = + container_of(work, struct user_namespace, destroyer); free_uid(ns->creator); kfree(ns); } + +void free_user_ns(struct kref *kref) +{ + struct user_namespace *ns = + container_of(kref, struct user_namespace, kref); + + INIT_WORK(&ns->destroyer, free_user_ns_work); + schedule_work(&ns->destroyer); +} EXPORT_SYMBOL(free_user_ns); -- cgit v1.2.3 From 5c2522218059ca1f4174a568923b988aad3ddfda Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:01:36 +0000 Subject: net headers: cleanup dcbnl.h 1) add an include for 2) change dcbmsg.dcb_family from unsigned char to __u8 to be more consistent with use of kernel types Signed-off-by: Chris Leech Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- include/linux/dcbnl.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h index b0ef274e0031..7d2e10006188 100644 --- a/include/linux/dcbnl.h +++ b/include/linux/dcbnl.h @@ -20,10 +20,12 @@ #ifndef __LINUX_DCBNL_H__ #define __LINUX_DCBNL_H__ +#include + #define DCB_PROTO_VERSION 1 struct dcbmsg { - unsigned char dcb_family; + __u8 dcb_family; __u8 cmd; __u16 dcb_pad; }; -- cgit v1.2.3 From 709ab3261e3ed789c0bb31c6ab53c9eccb276522 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:01:42 +0000 Subject: net headers: export dcbnl.h The DCB netlink interface is required for building the userspace tools available at e1000.sourceforge.net Signed-off-by: Chris Leech Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b97cdc516a8f..106c3ba50844 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -52,6 +52,7 @@ header-y += const.h header-y += cgroupstats.h header-y += cramfs_fs.h header-y += cycx_cfm.h +header-y += dcbnl.h header-y += dlmconstants.h header-y += dlm_device.h header-y += dlm_netlink.h -- cgit v1.2.3 From 5ce04e3de8c36ba37c56e94e3c4dc7973c7f546c Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Sun, 1 Mar 2009 08:53:27 -0800 Subject: fix warning in io_mapping_map_wc() Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- include/linux/io-mapping.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index cbc2f0cd631b..0adb0f91568c 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -91,8 +91,11 @@ io_mapping_unmap_atomic(void *vaddr) static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { + resource_size_t phys_addr; + BUG_ON(offset >= mapping->size); - resource_size_t phys_addr = mapping->base + offset; + phys_addr = mapping->base + offset; + return ioremap_wc(phys_addr, PAGE_SIZE); } -- cgit v1.2.3 From 17edde520927070a6bf14a6a75027c0b843443e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 22 Feb 2009 00:11:09 -0800 Subject: netns: Remove net_alive It turns out that net_alive is unnecessary, and the original problem that led to it being added was simply that the icmp code thought it was a network device and wound up being unable to handle packets while there were still packets in the network namespace. Now that icmp and tcp have been fixed to properly register themselves this problem is no longer present and we have a stronger guarantee that packets will not arrive in a network namespace then that provided by net_alive in netif_receive_skb. So remove net_alive allowing packet reception run a little faster. Additionally document the strong reason why network namespace cleanup is safe so that if something happens again someone else will have a chance of figuring it out. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/net/net_namespace.h | 27 +++++++++++++++++---------- net/core/dev.c | 6 ------ net/core/net_namespace.c | 3 --- 3 files changed, 17 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 6fc13d905c5f..ded434b032a4 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -109,11 +109,6 @@ extern struct list_head net_namespace_list; #ifdef CONFIG_NET_NS extern void __put_net(struct net *net); -static inline int net_alive(struct net *net) -{ - return net && atomic_read(&net->count); -} - static inline struct net *get_net(struct net *net) { atomic_inc(&net->count); @@ -145,11 +140,6 @@ int net_eq(const struct net *net1, const struct net *net2) } #else -static inline int net_alive(struct net *net) -{ - return 1; -} - static inline struct net *get_net(struct net *net) { return net; @@ -234,6 +224,23 @@ struct pernet_operations { void (*exit)(struct net *net); }; +/* + * Use these carefully. If you implement a network device and it + * needs per network namespace operations use device pernet operations, + * otherwise use pernet subsys operations. + * + * This is critically important. Most of the network code cleanup + * runs with the assumption that dev_remove_pack has been called so no + * new packets will arrive during and after the cleanup functions have + * been called. dev_remove_pack is not per namespace so instead the + * guarantee of no more packets arriving in a network namespace is + * provided by ensuring that all network devices and all sockets have + * left the network namespace before the cleanup methods are called. + * + * For the longest time the ipv4 icmp code was registered as a pernet + * device which caused kernel oops, and panics during network + * namespace cleanup. So please don't get this wrong. + */ extern int register_pernet_subsys(struct pernet_operations *); extern void unregister_pernet_subsys(struct pernet_operations *); extern int register_pernet_gen_subsys(int *id, struct pernet_operations *); diff --git a/net/core/dev.c b/net/core/dev.c index 72b0d26fd46d..9e4afe650e7a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2267,12 +2267,6 @@ int netif_receive_skb(struct sk_buff *skb) rcu_read_lock(); - /* Don't receive packets in an exiting network namespace */ - if (!net_alive(dev_net(skb->dev))) { - kfree_skb(skb); - goto out; - } - #ifdef CONFIG_NET_CLS_ACT if (skb->tc_verd & TC_NCLS) { skb->tc_verd = CLR_TC_NCLS(skb->tc_verd); diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 2adb1a7d361f..e3bebd36f053 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -157,9 +157,6 @@ static void cleanup_net(struct work_struct *work) struct pernet_operations *ops; struct net *net; - /* Be very certain incoming network packets will not find us */ - rcu_barrier(); - net = container_of(work, struct net, work); mutex_lock(&net_mutex); -- cgit v1.2.3 From 9d40bbda599def1e1d155d7f7dca14fe8744bd2b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 23:46:25 -0800 Subject: vlan: Fix vlan-in-vlan crashes. As analyzed by Patrick McHardy, vlan needs to reset it's netdev_ops pointer in it's ->init() function but this leaves the compat method pointers stale. Add a netdev_resync_ops() and call it from the vlan code. Any other driver which changes ->netdev_ops after register_netdevice() will need to call this new function after doing so too. With help from Patrick McHardy. Tested-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + net/8021q/vlan_dev.c | 3 ++- net/core/dev.c | 56 ++++++++++++++++++++++++++++------------------- 3 files changed, 37 insertions(+), 23 deletions(-) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ec54785d34f9..659366734f3f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1079,6 +1079,7 @@ extern void synchronize_net(void); extern int register_netdevice_notifier(struct notifier_block *nb); extern int unregister_netdevice_notifier(struct notifier_block *nb); extern int init_dummy_netdev(struct net_device *dev); +extern void netdev_resync_ops(struct net_device *dev); extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern struct net_device *dev_get_by_index(struct net *net, int ifindex); diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 4a19acd3a32b..1b34135cf990 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -553,7 +553,7 @@ static int vlan_dev_neigh_setup(struct net_device *dev, struct neigh_parms *pa) int err = 0; if (netif_device_present(real_dev) && ops->ndo_neigh_setup) - err = ops->ndo_neigh_setup(dev, pa); + err = ops->ndo_neigh_setup(real_dev, pa); return err; } @@ -639,6 +639,7 @@ static int vlan_dev_init(struct net_device *dev) dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN; dev->netdev_ops = &vlan_netdev_ops; } + netdev_resync_ops(dev); if (is_vlan_dev(real_dev)) subclass = 1; diff --git a/net/core/dev.c b/net/core/dev.c index 2dd484ed3dbb..f1129706ce7b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4282,6 +4282,39 @@ unsigned long netdev_fix_features(unsigned long features, const char *name) } EXPORT_SYMBOL(netdev_fix_features); +/* Some devices need to (re-)set their netdev_ops inside + * ->init() or similar. If that happens, we have to setup + * the compat pointers again. + */ +void netdev_resync_ops(struct net_device *dev) +{ +#ifdef CONFIG_COMPAT_NET_DEV_OPS + const struct net_device_ops *ops = dev->netdev_ops; + + dev->init = ops->ndo_init; + dev->uninit = ops->ndo_uninit; + dev->open = ops->ndo_open; + dev->change_rx_flags = ops->ndo_change_rx_flags; + dev->set_rx_mode = ops->ndo_set_rx_mode; + dev->set_multicast_list = ops->ndo_set_multicast_list; + dev->set_mac_address = ops->ndo_set_mac_address; + dev->validate_addr = ops->ndo_validate_addr; + dev->do_ioctl = ops->ndo_do_ioctl; + dev->set_config = ops->ndo_set_config; + dev->change_mtu = ops->ndo_change_mtu; + dev->neigh_setup = ops->ndo_neigh_setup; + dev->tx_timeout = ops->ndo_tx_timeout; + dev->get_stats = ops->ndo_get_stats; + dev->vlan_rx_register = ops->ndo_vlan_rx_register; + dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid; + dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = ops->ndo_poll_controller; +#endif +#endif +} +EXPORT_SYMBOL(netdev_resync_ops); + /** * register_netdevice - register a network device * @dev: device to register @@ -4326,28 +4359,7 @@ int register_netdevice(struct net_device *dev) * This is temporary until all network devices are converted. */ if (dev->netdev_ops) { - const struct net_device_ops *ops = dev->netdev_ops; - - dev->init = ops->ndo_init; - dev->uninit = ops->ndo_uninit; - dev->open = ops->ndo_open; - dev->change_rx_flags = ops->ndo_change_rx_flags; - dev->set_rx_mode = ops->ndo_set_rx_mode; - dev->set_multicast_list = ops->ndo_set_multicast_list; - dev->set_mac_address = ops->ndo_set_mac_address; - dev->validate_addr = ops->ndo_validate_addr; - dev->do_ioctl = ops->ndo_do_ioctl; - dev->set_config = ops->ndo_set_config; - dev->change_mtu = ops->ndo_change_mtu; - dev->neigh_setup = ops->ndo_neigh_setup; - dev->tx_timeout = ops->ndo_tx_timeout; - dev->get_stats = ops->ndo_get_stats; - dev->vlan_rx_register = ops->ndo_vlan_rx_register; - dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid; - dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ops->ndo_poll_controller; -#endif + netdev_resync_ops(dev); } else { char drivername[64]; pr_info("%s (%s): not using net_device_ops yet\n", -- cgit v1.2.3 From e7d3ef13d52a126438f687a1a32da65ff926ed57 Mon Sep 17 00:00:00 2001 From: Stuart Hayes Date: Wed, 4 Mar 2009 11:59:46 -0800 Subject: libata: change drive ready wait after hard reset to 5s This fixes problems during resume with drives that take longer than 1s to be ready. The ATA-6 spec appears to allow 5 seconds for a drive to be ready. On one affected system, this patch changes "PM: resume devices took..." message from 17 seconds to 4 seconds, and gets rid of a lot of ugly timeout/error messages. Without this patch, the libata code moves on after 1s, tries to send a soft reset (which the drive doesn't see because it isn't ready) which also times out, then an IDENTIFY command is sent to the drive which times out, and finally the error handler will try to send another hard reset which will finally get things working. Signed-off-by: Stuart Hayes Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 5d87bc09a1f5..dd818c7decd7 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -275,7 +275,7 @@ enum { * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1000, + ATA_TMOUT_PMP_SRST_WAIT = 5000, /* ATA bus states */ BUS_UNKNOWN = 0, -- cgit v1.2.3 From 5825627c9463581fd9e70f8285685889ae5bb9bb Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 27 Feb 2009 17:35:43 +0900 Subject: libata: fix dma_unmap_sg misuse libata passes the returned value of dma_map_sg() to dma_unmap_sg(),which is the misuse of dma_unmap_sg(). DMA-mapping.txt says: To unmap a scatterlist, just call: pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be the _same_ one you passed into the pci_map_sg call, it should _NOT_ be the 'count' value _returned_ from the pci_map_sg call. Signed-off-by: FUJITA Tomonori Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++-- include/linux/libata.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9fbf0595f3d4..5e324cea3019 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4612,7 +4612,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) VPRINTK("unmapping %u sg elements\n", qc->n_elem); if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir); qc->flags &= ~ATA_QCFLAG_DMAMAP; qc->sg = NULL; @@ -4727,7 +4727,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) return -1; DPRINTK("%d sg elements mapped\n", n_elem); - + qc->orig_n_elem = qc->n_elem; qc->n_elem = n_elem; qc->flags |= ATA_QCFLAG_DMAMAP; diff --git a/include/linux/libata.h b/include/linux/libata.h index dd818c7decd7..fbf064e13ad5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -530,6 +530,7 @@ struct ata_queued_cmd { unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; unsigned int n_elem; + unsigned int orig_n_elem; int dma_dir; -- cgit v1.2.3 From 84bda12af31f930e4200c5244aa111de2485d7b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 2 Mar 2009 18:53:26 +0900 Subject: libata: align ap->sector_buf ap->sector_buf is used as DMA target and should at least be aligned on cacheline. This caused problems on some embedded machines. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index fbf064e13ad5..dc18b87ed722 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -751,7 +751,8 @@ struct ata_port { acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif - u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ + /* owned by EH */ + u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; /* The following initializer overrides a method to NULL whether one of -- cgit v1.2.3 From 849d7130001ab740a5a4778a561049841fdd77c9 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 5 Mar 2009 16:10:57 +0100 Subject: ide: allow to wrap interrupt handler Signed-off-by: Stanislaw Gruszka Cc: Andrew Victor [bart: minor checkpatch.pl / CodingStyle fixups] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 1 + drivers/ide/ide-probe.c | 7 ++++++- include/linux/ide.h | 1 + 3 files changed, 8 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9ff90cb1dbf1..a9a6c208288a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1162,6 +1162,7 @@ out_early: return irq_ret; } +EXPORT_SYMBOL_GPL(ide_intr); /** * ide_do_drive_cmd - issue IDE special command diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index ce0818a993f6..ee8e3e7cad51 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -950,6 +950,7 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) static int init_irq (ide_hwif_t *hwif) { struct ide_io_ports *io_ports = &hwif->io_ports; + irq_handler_t irq_handler; int sa = 0; mutex_lock(&ide_cfg_mtx); @@ -959,6 +960,10 @@ static int init_irq (ide_hwif_t *hwif) hwif->timer.function = &ide_timer_expiry; hwif->timer.data = (unsigned long)hwif; + irq_handler = hwif->host->irq_handler; + if (irq_handler == NULL) + irq_handler = ide_intr; + #if defined(__mc68000__) sa = IRQF_SHARED; #endif /* __mc68000__ */ @@ -969,7 +974,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) hwif->tp_ops->set_irq(hwif, 1); - if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif)) + if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; if (!hwif->rqsize) { diff --git a/include/linux/ide.h b/include/linux/ide.h index fe235b65207e..e0cedfe9fad4 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -866,6 +866,7 @@ struct ide_host { unsigned int n_ports; struct device *dev[2]; unsigned int (*init_chipset)(struct pci_dev *); + irq_handler_t irq_handler; unsigned long host_flags; void *host_priv; ide_hwif_t *cur_port; /* for hosts requiring serialization */ -- cgit v1.2.3 From ebcad5aaea26da3cb2ca90b7f31a67a027eb60db Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 5 Mar 2009 16:10:59 +0100 Subject: remove stale comment from HDIO_GET_IDENTITY returns 256 words currently. Noticed by Norman Diamond. Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/hdreg.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index c37e9241fae7..ed21bd3dbd25 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -511,7 +511,6 @@ struct hd_driveid { unsigned short words69_70[2]; /* reserved words 69-70 * future command overlap and queuing */ - /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */ unsigned short words71_74[4]; /* reserved words 71-74 * for IDENTIFY PACKET DEVICE command */ -- cgit v1.2.3 From d42ad15b759d05a87f22b484af63987eff38ea88 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 5 Mar 2009 17:20:55 +0100 Subject: ata: add CFA specific identify data words Declare CFA specific identify data words 162 and 163 for future use. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik [bart: update patch summary/description] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index 08a86d5cdf1b..9a061accd8b8 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -89,6 +89,8 @@ enum { ATA_ID_DLF = 128, ATA_ID_CSFO = 129, ATA_ID_CFA_POWER = 160, + ATA_ID_CFA_KEY_MGMT = 162, + ATA_ID_CFA_MODES = 163, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), -- cgit v1.2.3 From ab96ddec7213004b632d24dc2cdcd2df5f16f50b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 7 Mar 2009 13:39:22 -0800 Subject: Input: serio - fix protocol number for TouchIT213 Protocol 0x37 has been reserved for iNexio devices and Sahara was supposed to get 0x38. Reported-by: Claudio Nieder Signed-off-by: Dmitry Torokhov --- include/linux/serio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/serio.h b/include/linux/serio.h index 1bcb357a01a1..e0417e4d3f15 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -212,7 +212,7 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_FUJITSU 0x35 #define SERIO_ZHENHUA 0x36 #define SERIO_INEXIO 0x37 -#define SERIO_TOUCHIT213 0x37 +#define SERIO_TOUCHIT213 0x38 #define SERIO_W8001 0x39 #endif -- cgit v1.2.3 From 129f8ae9b1b5be94517da76009ea956e89104ce8 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 9 Mar 2009 15:07:33 -0400 Subject: Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod." This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 1 - drivers/cpufreq/cpufreq.c | 51 +++++++++++-------------------- include/linux/cpufreq.h | 1 - 3 files changed, 18 insertions(+), 35 deletions(-) (limited to 'include') diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index b585e04cbc9e..3178c3acd97e 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -277,7 +277,6 @@ static struct cpufreq_driver p4clockmod_driver = { .name = "p4-clockmod", .owner = THIS_MODULE, .attr = p4clockmod_attr, - .hide_interface = 1, }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b55cb67435bd..d6daf3c507d3 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -754,11 +754,6 @@ static struct kobj_type ktype_cpufreq = { .release = cpufreq_sysfs_release, }; -static struct kobj_type ktype_empty_cpufreq = { - .sysfs_ops = &sysfs_ops, - .release = cpufreq_sysfs_release, -}; - /** * cpufreq_add_dev - add a CPU device @@ -892,36 +887,26 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) memcpy(&new_policy, policy, sizeof(struct cpufreq_policy)); /* prepare interface data */ - if (!cpufreq_driver->hide_interface) { - ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, - &sys_dev->kobj, "cpufreq"); + ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, + "cpufreq"); + if (ret) + goto err_out_driver_exit; + + /* set up files for this cpu device */ + drv_attr = cpufreq_driver->attr; + while ((drv_attr) && (*drv_attr)) { + ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); if (ret) goto err_out_driver_exit; - - /* set up files for this cpu device */ - drv_attr = cpufreq_driver->attr; - while ((drv_attr) && (*drv_attr)) { - ret = sysfs_create_file(&policy->kobj, - &((*drv_attr)->attr)); - if (ret) - goto err_out_driver_exit; - drv_attr++; - } - if (cpufreq_driver->get) { - ret = sysfs_create_file(&policy->kobj, - &cpuinfo_cur_freq.attr); - if (ret) - goto err_out_driver_exit; - } - if (cpufreq_driver->target) { - ret = sysfs_create_file(&policy->kobj, - &scaling_cur_freq.attr); - if (ret) - goto err_out_driver_exit; - } - } else { - ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq, - &sys_dev->kobj, "cpufreq"); + drv_attr++; + } + if (cpufreq_driver->get) { + ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); + if (ret) + goto err_out_driver_exit; + } + if (cpufreq_driver->target) { + ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) goto err_out_driver_exit; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 384b38d3e8e2..161042746afc 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -234,7 +234,6 @@ struct cpufreq_driver { int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg); int (*resume) (struct cpufreq_policy *policy); struct freq_attr **attr; - bool hide_interface; }; /* flags */ -- cgit v1.2.3