From b0d0ce8b6b91a0f6f99045b6019fc4c824634fb4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Jun 2014 12:10:24 +0200 Subject: spi: sh-msiof: Add DMA support Add DMA support to the MSIOF driver using platform data. As MSIOF DMA is limited to 32-bit words (requiring byte/wordswapping for smaller wordsizes), and the group length is limited to 256 words, DMA is performed on two fixed pages, allocated and mapped at driver initialization time. Performance figures (in Mbps) on r8a7791/koelsch at different SPI clock frequencies for 1024-byte and 4096-byte transfers: 1024 bytes 4096 bytes - 3.25 MHz: PIO 2.1, DMA 2.6 | PIO 2.8, DMA 3.1 - 6.5 MHz: PIO 3.2, DMA 4.4 | PIO 5.0, DMA 5.9 - 13 MHz: PIO 4.2, DMA 6.6 | PIO 8.2, DMA 10.7 - 26 MHz: PIO 5.9, DMA 10.4 | PIO 12.4, DMA 18.4 Note that DMA is only faster than PIO for transfers that exceed the FIFO size (typically 64 words / 256 bytes). Also note that large transfers (larger than the group length for DMA, or larger than the FIFO size for PIO), should use cs-gpio (with the appropriate pinmux setup), as the hardware chipselect will be deasserted in between chunks. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- include/linux/spi/sh_msiof.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/spi/sh_msiof.h b/include/linux/spi/sh_msiof.h index 2e8db3d2d2e5..88a14d81c49e 100644 --- a/include/linux/spi/sh_msiof.h +++ b/include/linux/spi/sh_msiof.h @@ -5,6 +5,8 @@ struct sh_msiof_spi_info { int tx_fifo_override; int rx_fifo_override; u16 num_chipselect; + unsigned int dma_tx_id; + unsigned int dma_rx_id; }; #endif /* __SPI_SH_MSIOF_H__ */ -- cgit v1.2.3