From b743287d7a0007493f5cada34ed2085d475050b4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Jan 2024 09:51:09 +0100 Subject: wifi: cfg80211: fix wiphy delayed work queueing When a wiphy work is queued with timer, and then again without a delay, it's started immediately but *also* started again after the timer expires. This can lead, for example, to warnings in mac80211's offchannel code as reported by Jouni. Running the same work twice isn't expected, of course. Fix this by deleting the timer at this point, when queuing immediately due to delay=0. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics") Link: https://msgid.link/20240125095108.2feb0eaaa446.I4617f3210ed0e7f252290d5970dac6a876aa595b@changeid Signed-off-by: Johannes Berg --- net/wireless/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/wireless/core.c b/net/wireless/core.c index 409d74c57ca0..3fb1b637352a 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -5,7 +5,7 @@ * Copyright 2006-2010 Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2023 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -1661,6 +1661,7 @@ void wiphy_delayed_work_queue(struct wiphy *wiphy, unsigned long delay) { if (!delay) { + del_timer(&dwork->timer); wiphy_work_queue(wiphy, &dwork->work); return; } -- cgit v1.2.3 From 1b023d475ae928f3036cefee9ea0a499af1d8900 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Tue, 16 Jan 2024 21:05:25 -0600 Subject: wifi: mac80211: Drop WBRF debugging statements Due to the way that debugging is used in the mac80211 subsystem this message ends up being noisier than it needs to be. As the statement is only useful at a first stage of triage for BIOS bugs, just drop it. Cc: Jun Ma Suggested-by: Kalle Valo Signed-off-by: Mario Limonciello Tested-by: Kalle Valo Link: https://msgid.link/20240117030525.539-1-mario.limonciello@amd.com Signed-off-by: Johannes Berg --- net/mac80211/wbrf.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'net') diff --git a/net/mac80211/wbrf.c b/net/mac80211/wbrf.c index a05c5b971789..3a8612309137 100644 --- a/net/mac80211/wbrf.c +++ b/net/mac80211/wbrf.c @@ -23,8 +23,6 @@ void ieee80211_check_wbrf_support(struct ieee80211_local *local) return; local->wbrf_supported = acpi_amd_wbrf_supported_producer(dev); - dev_dbg(dev, "WBRF is %s supported\n", - local->wbrf_supported ? "" : "not"); } static void get_chan_freq_boundary(u32 center_freq, u32 bandwidth, u64 *start, u64 *end) -- cgit v1.2.3 From 177fbbcb4ed6b306c1626a277fac3fb1c495a4c7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 13:14:13 +0100 Subject: wifi: cfg80211: detect stuck ECSA element in probe resp We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later. Reported-by: coldolt Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit Link: https://msgid.link/20240129131413.246972c8775e.Ibf834d7f52f9951a353b6872383da710a7358338@changeid Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ net/wireless/scan.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 62 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index cf79656ce09c..2b54fdd8ca15 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2910,6 +2910,8 @@ struct cfg80211_bss_ies { * own the beacon_ies, but they're just pointers to the ones from the * @hidden_beacon_bss struct) * @proberesp_ies: the information elements from the last Probe Response frame + * @proberesp_ecsa_stuck: ECSA element is stuck in the Probe Response frame, + * cannot rely on it having valid data * @hidden_beacon_bss: in case this BSS struct represents a probe response from * a BSS that hides the SSID in its beacon, this points to the BSS struct * that holds the beacon data. @beacon_ies is still valid, of course, and @@ -2950,6 +2952,8 @@ struct cfg80211_bss { u8 chains; s8 chain_signal[IEEE80211_MAX_CHAINS]; + u8 proberesp_ecsa_stuck:1; + u8 bssid_index; u8 max_bssid_indicator; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 2249b1a89d1c..389a52c29bfc 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1731,6 +1731,61 @@ static void cfg80211_update_hidden_bsses(struct cfg80211_internal_bss *known, } } +static void cfg80211_check_stuck_ecsa(struct cfg80211_registered_device *rdev, + struct cfg80211_internal_bss *known, + const struct cfg80211_bss_ies *old) +{ + const struct ieee80211_ext_chansw_ie *ecsa; + const struct element *elem_new, *elem_old; + const struct cfg80211_bss_ies *new, *bcn; + + if (known->pub.proberesp_ecsa_stuck) + return; + + new = rcu_dereference_protected(known->pub.proberesp_ies, + lockdep_is_held(&rdev->bss_lock)); + if (WARN_ON(!new)) + return; + + if (new->tsf - old->tsf < USEC_PER_SEC) + return; + + elem_old = cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, + old->data, old->len); + if (!elem_old) + return; + + elem_new = cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, + new->data, new->len); + if (!elem_new) + return; + + bcn = rcu_dereference_protected(known->pub.beacon_ies, + lockdep_is_held(&rdev->bss_lock)); + if (bcn && + cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, + bcn->data, bcn->len)) + return; + + if (elem_new->datalen != elem_old->datalen) + return; + if (elem_new->datalen < sizeof(struct ieee80211_ext_chansw_ie)) + return; + if (memcmp(elem_new->data, elem_old->data, elem_new->datalen)) + return; + + ecsa = (void *)elem_new->data; + + if (!ecsa->mode) + return; + + if (ecsa->new_ch_num != + ieee80211_frequency_to_channel(known->pub.channel->center_freq)) + return; + + known->pub.proberesp_ecsa_stuck = 1; +} + static bool cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, struct cfg80211_internal_bss *known, @@ -1750,8 +1805,10 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, /* Override possible earlier Beacon frame IEs */ rcu_assign_pointer(known->pub.ies, new->pub.proberesp_ies); - if (old) + if (old) { + cfg80211_check_stuck_ecsa(rdev, known, old); kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); + } } if (rcu_access_pointer(new->pub.beacon_ies)) { -- cgit v1.2.3 From 35e2385dbe787936c793d70755a5177d267a40aa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 13:14:14 +0100 Subject: wifi: mac80211: improve CSA/ECSA connection refusal As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that. Reported-by: coldolt Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit Link: https://msgid.link/20240129131413.cc2d0a26226e.I682c016af76e35b6c47007db50e8554c5a426910@changeid Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 103 ++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 76 insertions(+), 27 deletions(-) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 073105deb424..c62c7c6ce91f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -7309,6 +7309,75 @@ out_err: return err; } +static bool ieee80211_mgd_csa_present(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_bss_ies *ies, + u8 cur_channel, bool ignore_ecsa) +{ + const struct element *csa_elem, *ecsa_elem; + struct ieee80211_channel_sw_ie *csa = NULL; + struct ieee80211_ext_chansw_ie *ecsa = NULL; + + if (!ies) + return false; + + csa_elem = cfg80211_find_elem(WLAN_EID_CHANNEL_SWITCH, + ies->data, ies->len); + if (csa_elem && csa_elem->datalen == sizeof(*csa)) + csa = (void *)csa_elem->data; + + ecsa_elem = cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, + ies->data, ies->len); + if (ecsa_elem && ecsa_elem->datalen == sizeof(*ecsa)) + ecsa = (void *)ecsa_elem->data; + + if (csa && csa->count == 0) + csa = NULL; + if (csa && !csa->mode && csa->new_ch_num == cur_channel) + csa = NULL; + + if (ecsa && ecsa->count == 0) + ecsa = NULL; + if (ecsa && !ecsa->mode && ecsa->new_ch_num == cur_channel) + ecsa = NULL; + + if (ignore_ecsa && ecsa) { + sdata_info(sdata, + "Ignoring ECSA in probe response - was considered stuck!\n"); + return csa; + } + + return csa || ecsa; +} + +static bool ieee80211_mgd_csa_in_process(struct ieee80211_sub_if_data *sdata, + struct cfg80211_bss *bss) +{ + u8 cur_channel; + bool ret; + + cur_channel = ieee80211_frequency_to_channel(bss->channel->center_freq); + + rcu_read_lock(); + if (ieee80211_mgd_csa_present(sdata, + rcu_dereference(bss->beacon_ies), + cur_channel, false)) { + ret = true; + goto out; + } + + if (ieee80211_mgd_csa_present(sdata, + rcu_dereference(bss->proberesp_ies), + cur_channel, bss->proberesp_ecsa_stuck)) { + ret = true; + goto out; + } + + ret = false; +out: + rcu_read_unlock(); + return ret; +} + /* config hooks */ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, struct cfg80211_auth_request *req) @@ -7317,7 +7386,6 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_auth_data *auth_data; struct ieee80211_link_data *link; - const struct element *csa_elem, *ecsa_elem; u16 auth_alg; int err; bool cont_auth; @@ -7360,21 +7428,10 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, if (ifmgd->assoc_data) return -EBUSY; - rcu_read_lock(); - csa_elem = ieee80211_bss_get_elem(req->bss, WLAN_EID_CHANNEL_SWITCH); - ecsa_elem = ieee80211_bss_get_elem(req->bss, - WLAN_EID_EXT_CHANSWITCH_ANN); - if ((csa_elem && - csa_elem->datalen == sizeof(struct ieee80211_channel_sw_ie) && - ((struct ieee80211_channel_sw_ie *)csa_elem->data)->count != 0) || - (ecsa_elem && - ecsa_elem->datalen == sizeof(struct ieee80211_ext_chansw_ie) && - ((struct ieee80211_ext_chansw_ie *)ecsa_elem->data)->count != 0)) { - rcu_read_unlock(); + if (ieee80211_mgd_csa_in_process(sdata, req->bss)) { sdata_info(sdata, "AP is in CSA process, reject auth\n"); return -EINVAL; } - rcu_read_unlock(); auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + req->ie_len, GFP_KERNEL); @@ -7684,7 +7741,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_assoc_data *assoc_data; - const struct element *ssid_elem, *csa_elem, *ecsa_elem; + const struct element *ssid_elem; struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; ieee80211_conn_flags_t conn_flags = 0; struct ieee80211_link_data *link; @@ -7707,23 +7764,15 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, cbss = req->link_id < 0 ? req->bss : req->links[req->link_id].bss; - rcu_read_lock(); - ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); - if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) { - rcu_read_unlock(); + if (ieee80211_mgd_csa_in_process(sdata, cbss)) { + sdata_info(sdata, "AP is in CSA process, reject assoc\n"); kfree(assoc_data); return -EINVAL; } - csa_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_CHANNEL_SWITCH); - ecsa_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_EXT_CHANSWITCH_ANN); - if ((csa_elem && - csa_elem->datalen == sizeof(struct ieee80211_channel_sw_ie) && - ((struct ieee80211_channel_sw_ie *)csa_elem->data)->count != 0) || - (ecsa_elem && - ecsa_elem->datalen == sizeof(struct ieee80211_ext_chansw_ie) && - ((struct ieee80211_ext_chansw_ie *)ecsa_elem->data)->count != 0)) { - sdata_info(sdata, "AP is in CSA process, reject assoc\n"); + rcu_read_lock(); + ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); + if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) { rcu_read_unlock(); kfree(assoc_data); return -EINVAL; -- cgit v1.2.3 From 9480adfe4e0f0319b9da04b44e4eebd5ad07e0cd Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 15:53:48 +0100 Subject: wifi: mac80211: fix RCU use in TDLS fast-xmit This looks up the link under RCU protection, but isn't guaranteed to actually have protection. Fix that. Fixes: 8cc07265b691 ("wifi: mac80211: handle TDLS data frames with MLO") Link: https://msgid.link/20240129155348.8a9c0b1e1d89.I553f96ce953bb41b0b877d592056164dec20d01c@changeid Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'net') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 68a48abc7287..e448ab338448 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3100,10 +3100,11 @@ void ieee80211_check_fast_xmit(struct sta_info *sta) /* DA SA BSSID */ build.da_offs = offsetof(struct ieee80211_hdr, addr1); build.sa_offs = offsetof(struct ieee80211_hdr, addr2); + rcu_read_lock(); link = rcu_dereference(sdata->link[tdls_link_id]); - if (WARN_ON_ONCE(!link)) - break; - memcpy(hdr->addr3, link->u.mgd.bssid, ETH_ALEN); + if (!WARN_ON_ONCE(!link)) + memcpy(hdr->addr3, link->u.mgd.bssid, ETH_ALEN); + rcu_read_unlock(); build.hdr_len = 24; break; } -- cgit v1.2.3 From dd6c064cfc3fc18d871107c6f5db8837e88572e4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 15:53:55 +0100 Subject: wifi: mac80211: set station RX-NSS on reconfig When a station is added/reconfigured by userspace, e.g. a TDLS peer or a SoftAP client STA, rx_nss is currently not always set, so that it might be left zero. Set it up properly. Link: https://msgid.link/20240129155354.98f148a3d654.I193a02155f557ea54dc9d0232da66cf96734119a@changeid Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 489dd97f5172..321698012e12 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1869,6 +1869,8 @@ static int sta_link_apply_parameters(struct ieee80211_local *local, sband->band); } + ieee80211_sta_set_rx_nss(link_sta); + return ret; } -- cgit v1.2.3 From 733c498a80853acbafe284a40468b91f4d41f0b4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 15:54:02 +0100 Subject: wifi: mac80211: fix driver debugfs for vif type change If a driver implements the change_interface() method, we switch interface type without taking the interface down, but still will recreate the debugfs for it since it's a new type. As such, we should use the ieee80211_debugfs_recreate_netdev() function here to also recreate the driver's files, if it is indeed from a type change while up. Link: https://msgid.link/20240129155402.7311a36ffeeb.I18df02bbeb685d4250911de5ffbaf090f60c3803@changeid Signed-off-by: Johannes Berg --- net/mac80211/debugfs_netdev.c | 4 ++-- net/mac80211/debugfs_netdev.h | 5 ----- net/mac80211/iface.c | 2 +- 3 files changed, 3 insertions(+), 8 deletions(-) (limited to 'net') diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index dce5606ed66d..68596ef78b15 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -997,8 +997,8 @@ static void add_link_files(struct ieee80211_link_data *link, } } -void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata, - bool mld_vif) +static void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata, + bool mld_vif) { char buf[10+IFNAMSIZ]; diff --git a/net/mac80211/debugfs_netdev.h b/net/mac80211/debugfs_netdev.h index b226b1aae88a..a02ec0a413f6 100644 --- a/net/mac80211/debugfs_netdev.h +++ b/net/mac80211/debugfs_netdev.h @@ -11,8 +11,6 @@ #include "ieee80211_i.h" #ifdef CONFIG_MAC80211_DEBUGFS -void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata, - bool mld_vif); void ieee80211_debugfs_remove_netdev(struct ieee80211_sub_if_data *sdata); void ieee80211_debugfs_rename_netdev(struct ieee80211_sub_if_data *sdata); void ieee80211_debugfs_recreate_netdev(struct ieee80211_sub_if_data *sdata, @@ -24,9 +22,6 @@ void ieee80211_link_debugfs_remove(struct ieee80211_link_data *link); void ieee80211_link_debugfs_drv_add(struct ieee80211_link_data *link); void ieee80211_link_debugfs_drv_remove(struct ieee80211_link_data *link); #else -static inline void ieee80211_debugfs_add_netdev( - struct ieee80211_sub_if_data *sdata, bool mld_vif) -{} static inline void ieee80211_debugfs_remove_netdev( struct ieee80211_sub_if_data *sdata) {} diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index e4e7c0b38cb6..11c4caa4748e 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1783,7 +1783,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, /* need to do this after the switch so vif.type is correct */ ieee80211_link_setup(&sdata->deflink); - ieee80211_debugfs_add_netdev(sdata, false); + ieee80211_debugfs_recreate_netdev(sdata, false); } static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, -- cgit v1.2.3 From 86b2dac224f963be92634a878888222e1e938f48 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 19:54:05 +0100 Subject: wifi: mac80211: initialize SMPS mode correctly The SMPS mode is currently re-initialized too late, since ieee80211_prep_channel() can be called again after we've already done ieee80211_setup_assoc_link(), in case there's some override of the channel configuration. Fix this. Link: https://msgid.link/20240129195405.d6d74508be18.I0a7303b1ce4d8e5436011951ab624372a445c069@changeid Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c62c7c6ce91f..f1cdd2df323e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8,7 +8,7 @@ * Copyright 2007, Michael Wu * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2023 Intel Corporation + * Copyright (C) 2018 - 2024 Intel Corporation */ #include @@ -2918,6 +2918,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, /* other links will be destroyed */ sdata->deflink.u.mgd.bss = NULL; + sdata->deflink.smps_mode = IEEE80211_SMPS_OFF; netif_carrier_off(sdata->dev); @@ -5045,9 +5046,6 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, if (!link) return 0; - /* will change later if needed */ - link->smps_mode = IEEE80211_SMPS_OFF; - /* * If this fails (possibly due to channel context sharing * on incompatible channels, e.g. 80+80 and 160 sharing the @@ -7096,6 +7094,7 @@ void ieee80211_mgd_setup_link(struct ieee80211_link_data *link) link->u.mgd.p2p_noa_index = -1; link->u.mgd.conn_flags = 0; link->conf->bssid = link->u.mgd.bssid; + link->smps_mode = IEEE80211_SMPS_OFF; wiphy_work_init(&link->u.mgd.request_smps_work, ieee80211_request_smps_mgd_work); -- cgit v1.2.3 From 178e9d6adc4356c2f1659f575ecea626e7fbd05a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 19:57:30 +0100 Subject: wifi: mac80211: fix unsolicited broadcast probe config There's a bug in ieee80211_set_unsol_bcast_probe_resp(), it tries to return BSS_CHANGED_UNSOL_BCAST_PROBE_RESP (which has the value 1<<31) in an int, which makes it negative and considered an error. Fix this by passing the changed flags to set separately. Fixes: 3b1c256eb4ae ("wifi: mac80211: fixes in FILS discovery updates") Reviewed-by: Jeff Johnson Link: https://msgid.link/20240129195729.965b0740bf80.I6bc6f5236863f686c17d689be541b1dd2633c417@changeid Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'net') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 321698012e12..327682995c92 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -5,7 +5,7 @@ * Copyright 2006-2010 Johannes Berg * Copyright 2013-2015 Intel Mobile Communications GmbH * Copyright (C) 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2022 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation */ #include @@ -987,7 +987,8 @@ static int ieee80211_set_unsol_bcast_probe_resp(struct ieee80211_sub_if_data *sdata, struct cfg80211_unsol_bcast_probe_resp *params, struct ieee80211_link_data *link, - struct ieee80211_bss_conf *link_conf) + struct ieee80211_bss_conf *link_conf, + u64 *changed) { struct unsol_bcast_probe_resp_data *new, *old = NULL; @@ -1011,7 +1012,8 @@ ieee80211_set_unsol_bcast_probe_resp(struct ieee80211_sub_if_data *sdata, RCU_INIT_POINTER(link->u.ap.unsol_bcast_probe_resp, NULL); } - return BSS_CHANGED_UNSOL_BCAST_PROBE_RESP; + *changed |= BSS_CHANGED_UNSOL_BCAST_PROBE_RESP; + return 0; } static int ieee80211_set_ftm_responder_params( @@ -1450,10 +1452,9 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, err = ieee80211_set_unsol_bcast_probe_resp(sdata, ¶ms->unsol_bcast_probe_resp, - link, link_conf); + link, link_conf, &changed); if (err < 0) goto error; - changed |= err; err = drv_start_ap(sdata->local, sdata, link_conf); if (err) { @@ -1525,10 +1526,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, err = ieee80211_set_unsol_bcast_probe_resp(sdata, ¶ms->unsol_bcast_probe_resp, - link, link_conf); + link, link_conf, &changed); if (err < 0) return err; - changed |= err; if (beacon->he_bss_color_valid && beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) { -- cgit v1.2.3 From a0b4f2291319c5d47ecb196b90400814fdcfd126 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 31 Jan 2024 16:48:56 +0100 Subject: wifi: mac80211: fix waiting for beacons logic This should be waiting if we don't have a beacon yet, but somehow I managed to invert the logic. Fix that. Fixes: 74e1309acedc ("wifi: mac80211: mlme: look up beacon elems only if needed") Link: https://msgid.link/20240131164856.922701229546.I239b379e7cee04608e73c016b737a5245e5b23dd@changeid Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f1cdd2df323e..12f67871af69 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8046,8 +8046,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, rcu_read_lock(); beacon_ies = rcu_dereference(req->bss->beacon_ies); - - if (beacon_ies) { + if (!beacon_ies) { /* * Wait up to one beacon interval ... * should this be more if we miss one? -- cgit v1.2.3 From c042600c17d8c490279f0ae2baee29475fe8047d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 31 Jan 2024 16:48:23 +0100 Subject: wifi: mac80211: adding missing drv_mgd_complete_tx() call There's a call to drv_mgd_prepare_tx() and so there should be one to drv_mgd_complete_tx(), but on this path it's not. Add it. Link: https://msgid.link/20240131164824.2f0922a514e1.I5aac89b93bcead88c374187d70cad0599d29d2c8@changeid Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 12f67871af69..2022a26eb881 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8127,6 +8127,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, req->reason_code, false); + drv_mgd_complete_tx(sdata->local, sdata, &info); return 0; } -- cgit v1.2.3 From 62a6183c13319e4d2227473a04abd104c4f56dcf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Jan 2024 20:09:07 +0100 Subject: wifi: mac80211: accept broadcast probe responses on 6 GHz On the 6 GHz band, probe responses are sent as broadcast to optimise medium usage. However, without OCE configuration we weren't accepting them, which is wrong, even if wpa_s is by default enabling OCE. Accept them without the OCE config as well. Link: https://msgid.link/20240129200907.5a89c2821897.I92e9dfa0f9b350bc7f37dd4bb38031d156d78d8a@changeid Signed-off-by: Johannes Berg --- net/mac80211/scan.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) (limited to 'net') diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 645355e5f1bc..f9d5842601fa 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -9,7 +9,7 @@ * Copyright 2007, Michael Wu * Copyright 2013-2015 Intel Mobile Communications GmbH * Copyright 2016-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2023 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation */ #include @@ -237,14 +237,18 @@ ieee80211_bss_info_update(struct ieee80211_local *local, } static bool ieee80211_scan_accept_presp(struct ieee80211_sub_if_data *sdata, + struct ieee80211_channel *channel, u32 scan_flags, const u8 *da) { if (!sdata) return false; - /* accept broadcast for OCE */ - if (scan_flags & NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP && - is_broadcast_ether_addr(da)) + + /* accept broadcast on 6 GHz and for OCE */ + if (is_broadcast_ether_addr(da) && + (channel->band == NL80211_BAND_6GHZ || + scan_flags & NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP)) return true; + if (scan_flags & NL80211_SCAN_FLAG_RANDOM_ADDR) return true; return ether_addr_equal(da, sdata->vif.addr); @@ -293,6 +297,12 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0); } + channel = ieee80211_get_channel_khz(local->hw.wiphy, + ieee80211_rx_status_to_khz(rx_status)); + + if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) + return; + if (ieee80211_is_probe_resp(mgmt->frame_control)) { struct cfg80211_scan_request *scan_req; struct cfg80211_sched_scan_request *sched_scan_req; @@ -310,19 +320,15 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) /* ignore ProbeResp to foreign address or non-bcast (OCE) * unless scanning with randomised address */ - if (!ieee80211_scan_accept_presp(sdata1, scan_req_flags, + if (!ieee80211_scan_accept_presp(sdata1, channel, + scan_req_flags, mgmt->da) && - !ieee80211_scan_accept_presp(sdata2, sched_scan_req_flags, + !ieee80211_scan_accept_presp(sdata2, channel, + sched_scan_req_flags, mgmt->da)) return; } - channel = ieee80211_get_channel_khz(local->hw.wiphy, - ieee80211_rx_status_to_khz(rx_status)); - - if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) - return; - bss = ieee80211_bss_info_update(local, rx_status, mgmt, skb->len, channel); -- cgit v1.2.3