From dba8b46992c55946d3b092934f581a343403118f Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 Sep 2011 11:24:41 +0200 Subject: ALSA: mpu401: clean up interrupt specification The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/isa/msnd/msnd_pinnacle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/isa/msnd') diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index 91d6023a63e5..0961e2cf20ca 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -600,7 +600,7 @@ static int __devinit snd_msnd_attach(struct snd_card *card) mpu_io[0], MPU401_MODE_INPUT | MPU401_MODE_OUTPUT, - mpu_irq[0], IRQF_DISABLED, + mpu_irq[0], &chip->rmidi); if (err < 0) { printk(KERN_ERR LOGNAME -- cgit v1.2.3