From fa129ebeba6db2b4bcea45efe87a71d68181c04c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 19 Sep 2013 18:20:26 +0100 Subject: ASoC: 88pm60x: Don't use control data for i2c In preparation for using the regmap directly in the CODEC driver replace references to the I2C client using control_data with references to the driver private data. Signed-off-by: Mark Brown --- sound/soc/codecs/88pm860x-codec.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'sound/soc/codecs/88pm860x-codec.c') diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c index 8af04343cc1a..3925cf34f751 100644 --- a/sound/soc/codecs/88pm860x-codec.c +++ b/sound/soc/codecs/88pm860x-codec.c @@ -1166,6 +1166,7 @@ static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, static int pm860x_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); int data; switch (level) { @@ -1179,17 +1180,17 @@ static int pm860x_set_bias_level(struct snd_soc_codec *codec, if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { /* Enable Audio PLL & Audio section */ data = AUDIO_PLL | AUDIO_SECTION_ON; - pm860x_reg_write(codec->control_data, REG_MISC2, data); + pm860x_reg_write(pm860x->i2c, REG_MISC2, data); udelay(300); data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; - pm860x_reg_write(codec->control_data, REG_MISC2, data); + pm860x_reg_write(pm860x->i2c, REG_MISC2, data); } break; case SND_SOC_BIAS_OFF: data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; - pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + pm860x_set_bits(pm860x->i2c, REG_MISC2, data, 0); break; } codec->dapm.bias_level = level; @@ -1319,17 +1320,17 @@ int pm860x_hs_jack_detect(struct snd_soc_codec *codec, pm860x->det.lo_shrt = lo_shrt; if (det & SND_JACK_HEADPHONE) - pm860x_set_bits(codec->control_data, REG_HS_DET, + pm860x_set_bits(pm860x->i2c, REG_HS_DET, EN_HS_DET, EN_HS_DET); /* headset short detect */ if (hs_shrt) { data = CLR_SHORT_HS2 | CLR_SHORT_HS1; - pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + pm860x_set_bits(pm860x->i2c, REG_SHORTS, data, data); } /* Lineout short detect */ if (lo_shrt) { data = CLR_SHORT_LO2 | CLR_SHORT_LO1; - pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + pm860x_set_bits(pm860x->i2c, REG_SHORTS, data, data); } /* sync status */ @@ -1347,7 +1348,7 @@ int pm860x_mic_jack_detect(struct snd_soc_codec *codec, pm860x->det.mic_det = det; if (det & SND_JACK_MICROPHONE) - pm860x_set_bits(codec->control_data, REG_MIC_DET, + pm860x_set_bits(pm860x->i2c, REG_MIC_DET, MICDET_MASK, MICDET_MASK); /* sync status */ @@ -1377,7 +1378,7 @@ static int pm860x_probe(struct snd_soc_codec *codec) pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + ret = pm860x_bulk_read(pm860x->i2c, REG_CACHE_BASE, REG_CACHE_SIZE, codec->reg_cache); if (ret < 0) { dev_err(codec->dev, "Failed to fill register cache: %d\n", -- cgit v1.2.3