From 81dde99f1ac64e27290990c67439b49ecc1f7c29 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 23 Oct 2020 11:23:46 +0200 Subject: ASoC: jz4740-i2s: Remove manual DMA peripheral ID assignment All platforms that use the jz4740-i2s driver have been switched to devicetree for a while now and the assignment of the DMA peripheral ID is done in the devicetree. It is no longer necessary to manually assign the peripheral ID in the driver, so remove that. The DMA driver does not even look at the value assigned in the driver anymore and always uses the value provided by the devicetree. Signed-off-by: Lars-Peter Clausen Reviewed-by: Paul Cercueil Link: https://lore.kernel.org/r/20201023092346.5777-1-lars@metafoo.de Signed-off-by: Mark Brown --- sound/soc/jz4740/jz4740-i2s.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'sound/soc/jz4740') diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index c7bd20104b20..e8bc7ca5ee5e 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -26,9 +26,6 @@ #include "jz4740-i2s.h" -#define JZ4740_DMA_TYPE_AIC_TRANSMIT 24 -#define JZ4740_DMA_TYPE_AIC_RECEIVE 25 - #define JZ_REG_AIC_CONF 0x00 #define JZ_REG_AIC_CTRL 0x04 #define JZ_REG_AIC_I2S_FMT 0x10 @@ -377,13 +374,11 @@ static void jz4740_i2c_init_pcm_config(struct jz4740_i2s *i2s) /* Playback */ dma_data = &i2s->playback_dma_data; dma_data->maxburst = 16; - dma_data->slave_id = JZ4740_DMA_TYPE_AIC_TRANSMIT; dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO; /* Capture */ dma_data = &i2s->capture_dma_data; dma_data->maxburst = 16; - dma_data->slave_id = JZ4740_DMA_TYPE_AIC_RECEIVE; dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO; } -- cgit v1.2.3