From 3fec6b6d5a53d37194735268b9e220f75ca37f19 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 5 Apr 2012 12:28:01 -0600 Subject: ASoC: set idle_bias_off=1 for all platform DAPM contexts The ASoC core currently defaults to using STANDBY rather than OFF for idle ASoC platform devices, which causes a permanent pm_runtime_get() on them. This keeps the device active unnecessarily. This can be especially problematic when the ASoC platform device and DAI device are the same device. The distinction between OFF and STANDBY is likely not relevant for ASoC platform drivers, since they aren't analog devices. So, solve this issue by hard-coding idle_bias_off = 1 for all ASoC platform devices. If this turns out to be a problem, this value could be sourced from the snd_soc_platform_driver, similarly to soc_probe_codec(). Note: Prior to this change, this caused a large (10) runtime_active count for the Tegra I2S controller even when not in use, and a leak in that value as streams were started and stopped. This change probably hides a bug. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a4deebc0801a..8d2ebf502df4 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1087,6 +1087,8 @@ static int soc_probe_platform(struct snd_soc_card *card, snd_soc_dapm_new_controls(&platform->dapm, driver->dapm_widgets, driver->num_dapm_widgets); + platform->dapm.idle_bias_off = 1; + if (driver->probe) { ret = driver->probe(platform); if (ret < 0) { -- cgit v1.2.3