From bd4cbf6c7689d35d5d1248369d2c350f4711ca0a Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 29 May 2010 16:53:23 +0100 Subject: ALSA: snd-usb-caiaq: Restore 'Control vinyl' input mode on A4DJ This feature was undocumented on early A4DJ units. It is indicated by lighting both the 'line' and 'phono' lamps at the same time. Newer units document this and the newer Windows drivers enable this for all units, so restore the functionality. This patch simplifies the code and changes the mode mapping to match the A8DJ, favouring simpler code and consistency over keeping the existing mapping. Both 'Control vinyl' and 'Phono' input modes enable the hardware preamp. The difference is the input impedance. This reverts commit 9a9527e. Acked-by: Daniel Mack Signed-off-by: Mark Hills Signed-off-by: Takashi Iwai --- sound/usb/caiaq/control.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/caiaq/control.c b/sound/usb/caiaq/control.c index 36ed703a7416..70c3866bb627 100644 --- a/sound/usb/caiaq/control.c +++ b/sound/usb/caiaq/control.c @@ -42,21 +42,12 @@ static int control_info(struct snd_kcontrol *kcontrol, switch (dev->chip.usb_id) { case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): - if (pos == 0) { - /* current input mode of A8DJ */ - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 2; - return 0; - } - break; - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): if (pos == 0) { - /* current input mode of A4DJ */ + /* current input mode of A8DJ and A4DJ */ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; + uinfo->value.integer.max = 2; return 0; } break; @@ -86,14 +77,6 @@ static int control_get(struct snd_kcontrol *kcontrol, struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); int pos = kcontrol->private_value; - if (dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { - /* A4DJ has only one control */ - /* do not expose hardware input mode 0 */ - ucontrol->value.integer.value[0] = dev->control_state[0] - 1; - return 0; - } - if (pos & CNT_INTVAL) ucontrol->value.integer.value[0] = dev->control_state[pos & ~CNT_INTVAL]; @@ -113,15 +96,6 @@ static int control_put(struct snd_kcontrol *kcontrol, unsigned char cmd = EP1_CMD_WRITE_IO; switch (dev->chip.usb_id) { - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): { - /* A4DJ has only one control */ - /* do not expose hardware input mode 0 */ - dev->control_state[0] = ucontrol->value.integer.value[0] + 1; - snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, - dev->control_state, sizeof(dev->control_state)); - return 1; - } - case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1): cmd = EP1_CMD_DIMM_LEDS; break; -- cgit v1.2.3