# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Pin Function Controller (GPIO and Pin Mux/Config) maintainers: - Geert Uytterhoeven description: The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH/R-Mobile SoCs it also acts as a GPIO controller. properties: compatible: enum: - renesas,pfc-emev2 # EMMA Mobile EV2 - renesas,pfc-r8a73a4 # R-Mobile APE6 - renesas,pfc-r8a7740 # R-Mobile A1 - renesas,pfc-r8a7742 # RZ/G1H - renesas,pfc-r8a7743 # RZ/G1M - renesas,pfc-r8a7744 # RZ/G1N - renesas,pfc-r8a7745 # RZ/G1E - renesas,pfc-r8a77470 # RZ/G1C - renesas,pfc-r8a774a1 # RZ/G2M - renesas,pfc-r8a774a3 # RZ/G2M v3.0 - renesas,pfc-r8a774b1 # RZ/G2N - renesas,pfc-r8a774c0 # RZ/G2E - renesas,pfc-r8a774e1 # RZ/G2H - renesas,pfc-r8a7778 # R-Car M1 - renesas,pfc-r8a7779 # R-Car H1 - renesas,pfc-r8a7790 # R-Car H2 - renesas,pfc-r8a7791 # R-Car M2-W - renesas,pfc-r8a7792 # R-Car V2H - renesas,pfc-r8a7793 # R-Car M2-N - renesas,pfc-r8a7794 # R-Car E2 - renesas,pfc-r8a7795 # R-Car H3 - renesas,pfc-r8a7796 # R-Car M3-W - renesas,pfc-r8a77961 # R-Car M3-W+ - renesas,pfc-r8a77965 # R-Car M3-N - renesas,pfc-r8a77970 # R-Car V3M - renesas,pfc-r8a77980 # R-Car V3H - renesas,pfc-r8a77990 # R-Car E3 - renesas,pfc-r8a77995 # R-Car D3 - renesas,pfc-r8a779a0 # R-Car V3U - renesas,pfc-r8a779f0 # R-Car S4-8 - renesas,pfc-r8a779g0 # R-Car V4H - renesas,pfc-r8a779h0 # R-Car V4M - renesas,pfc-sh73a0 # SH-Mobile AG5 reg: minItems: 1 maxItems: 10 gpio-controller: true '#gpio-cells': const: 2 gpio-ranges: minItems: 1 maxItems: 16 interrupts-extended: minItems: 32 maxItems: 64 description: Specify the interrupts associated with external IRQ pins on SoCs where the PFC acts as a GPIO controller. It must contain one interrupt per external IRQ, sorted by external IRQ number. power-domains: maxItems: 1 allOf: - $ref: pinctrl.yaml# required: - compatible - reg if: properties: compatible: enum: - renesas,pfc-r8a73a4 - renesas,pfc-r8a7740 - renesas,pfc-sh73a0 then: required: - interrupts-extended - gpio-controller - '#gpio-cells' - gpio-ranges - power-domains additionalProperties: anyOf: - type: object allOf: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# description: Pin controller client devices use pin configuration subnodes (children and grandchildren) for desired pin configuration. Client device subnodes use below standard properties. properties: function: true groups: true pins: true bias-disable: true bias-pull-down: true bias-pull-up: true drive-strength: enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values power-source: enum: [ 1800, 3300 ] gpio-hog: true gpios: true input: true output-high: true output-low: true additionalProperties: false - type: object additionalProperties: $ref: "#/additionalProperties/anyOf/0" examples: - | pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, <0xe605800c 0x20>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 0 212>; interrupts-extended = <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; power-domains = <&pd_c5>; lcd0-mux-hog { /* DBGMD/LCDC0/FSIA MUX */ gpio-hog; gpios = <176 0>; output-high; }; }; - | pinctrl@e6060000 { compatible = "renesas,pfc-r8a7795"; reg = <0xe6060000 0x50c>; avb_pins: avb { mux { groups = "avb_link", "avb_mdio", "avb_mii"; function = "avb"; }; pins_mdio { groups = "avb_mdio"; drive-strength = <24>; }; pins_mii_tx { pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; drive-strength = <12>; }; }; keys_pins: keys { pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1"; bias-pull-up; }; sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <3300>; }; };