// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4412 based Trats 2 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Device tree source file for Samsung's Trats 2 board which is based on * Samsung's Exynos4412 SoC. */ /dts-v1/; #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" #include #include #include #include #include "exynos-pinctrl.h" / { compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; aliases { i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; }; chosen { stdout-path = &serial_2; }; firmware@204f000 { compatible = "samsung,secure-firmware"; reg = <0x0204f000 0x1000>; }; fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; clock-frequency = <0>; }; xusbxti { compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; }; cam_io_reg: voltage-regulator-1 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; status = "disabled"; }; cam_af_reg: voltage-regulator-2 { compatible = "regulator-fixed"; regulator-name = "CAM_AF"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; status = "disabled"; }; vsil12: voltage-regulator-3 { compatible = "regulator-fixed"; regulator-name = "VSIL_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&buck7_reg>; }; vcc33mhl: voltage-regulator-4 { compatible = "regulator-fixed"; regulator-name = "VCC_3.3_MHL"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; vcc18mhl: voltage-regulator-5 { compatible = "regulator-fixed"; regulator-name = "VCC_1.8_MHL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; touchkey_reg: voltage-regulator-6 { compatible = "regulator-fixed"; regulator-name = "LED_VDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; status = "disabled"; }; vbatt_reg: voltage-regulator-7 { compatible = "regulator-fixed"; regulator-name = "VBATT"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; mic_bias_reg: voltage-regulator-8 { compatible = "regulator-fixed"; regulator-name = "MICBIAS_LDO_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; submic_bias_reg: voltage-regulator-9 { compatible = "regulator-fixed"; regulator-name = "SUB_MICBIAS_LDO_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys>; key-down { gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; wakeup-source; }; key-ok { gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; linux,code = <139>; label = "ok"; debounce-interval = <10>; wakeup-source; }; }; i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; pmic@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77693_irq>; reg = <0x66>; regulators { esafeout1_reg: ESAFEOUT1 { regulator-name = "ESAFEOUT1"; }; esafeout2_reg: ESAFEOUT2 { regulator-name = "ESAFEOUT2"; }; charger_reg: CHARGER { regulator-name = "CHARGER"; regulator-min-microamp = <60000>; regulator-max-microamp = <2580000>; }; }; motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; }; charger { compatible = "maxim,max77693-charger"; maxim,constant-microvolt = <4350000>; maxim,min-system-microvolt = <3600000>; maxim,thermal-regulation-celsius = <100>; maxim,battery-overcurrent-microamp = <3500000>; maxim,charge-input-threshold-microvolt = <4300000>; }; }; }; i2c_max77693_fuel: i2c-gpio-3 { compatible = "i2c-gpio"; sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77693_fuel_irq>; reg = <0x36>; maxim,over-heat-temp = <700>; maxim,over-volt = <4500>; }; }; i2c-gpio-4 { compatible = "i2c-gpio"; sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; touchkey@20 { compatible = "cypress,midas-touchkey"; reg = <0x20>; vdd-supply = <&touchkey_reg>; vcc-supply = <&ldo5_reg>; interrupt-parent = <&gpj0>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; linux,keycodes = ; }; }; i2c-mhl { compatible = "i2c-gpio"; sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&i2c_mhl_bus>; pinctrl-names = "default"; sii9234: hdmi-bridge@39 { compatible = "sil,sii9234"; avcc33-supply = <&vcc33mhl>; iovcc18-supply = <&vcc18mhl>; avcc12-supply = <&vsil12>; cvcc12-supply = <&vsil12>; reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpf3>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; reg = <0x39>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mhl_to_hdmi: endpoint { remote-endpoint = <&hdmi_to_mhl>; }; }; }; }; }; wlan_pwrseq: sdhci3-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; clocks = <&max77686 MAX77686_CLK_PMIC>; clock-names = "ext_clock"; }; sound: sound { compatible = "samsung,midas-audio"; model = "Midas"; mic-bias-supply = <&mic_bias_reg>; submic-bias-supply = <&submic_bias_reg>; cpu { sound-dai = <&i2s0 0>; }; codec { sound-dai = <&wm1811>; }; }; thermistor-ap { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 1>; /* AP temperature */ }; thermistor-battery { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; }; &adc { vdd-supply = <&ldo3_reg>; status = "okay"; }; &bus_dmc { devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; vdd-supply = <&buck1_reg>; status = "okay"; }; &bus_acp { devfreq = <&bus_dmc>; status = "okay"; }; &bus_c2c { devfreq = <&bus_dmc>; status = "okay"; }; &bus_leftbus { devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; vdd-supply = <&buck3_reg>; status = "okay"; }; &bus_rightbus { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_display { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_fsys { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_peri { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_mfc { devfreq = <&bus_leftbus>; status = "okay"; }; &camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; }; &cpu0 { cpu0-supply = <&buck2_reg>; }; &cpu_thermal { cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>, <&cpu3 7 7>; }; map1 { /* Corresponds to 200MHz at freq_table */ cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, <&cpu2 13 13>, <&cpu3 13 13>; }; }; }; &csis_0 { status = "okay"; vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; assigned-clocks = <&clock CLK_MOUT_CSIS0>, <&clock CLK_SCLK_CSIS0>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; /* Camera C (3) MIPI CSI-2 (CSIS0) */ port@3 { reg = <3>; csis0_ep: endpoint { remote-endpoint = <&s5c73m3_ep>; data-lanes = <1 2 3 4>; samsung,csis-hs-settle = <12>; }; }; }; &csis_1 { status = "okay"; vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; assigned-clocks = <&clock CLK_MOUT_CSIS1>, <&clock CLK_SCLK_CSIS1>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; /* Camera D (4) MIPI CSI-2 (CSIS1) */ port@4 { reg = <4>; csis1_ep: endpoint { remote-endpoint = <&is_s5k6a3_ep>; data-lanes = <1>; samsung,csis-hs-settle = <18>; samsung,csis-wclk; }; }; }; &dsi_0 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; samsung,burst-clock-frequency = <500000000>; samsung,esc-clock-frequency = <20000000>; samsung,pll-clock-frequency = <24000000>; }; &exynos_usbphy { vbus-supply = <&esafeout1_reg>; status = "okay"; }; &fimc_0 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; &fimc_1 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; &fimc_2 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; &fimc_3 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; &fimc_is { pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; }; &fimc_lite_0 { status = "okay"; }; &fimc_lite_1 { status = "okay"; }; &fimd { status = "okay"; }; &gpu { mali-supply = <&buck4_reg>; status = "okay"; }; &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo3_reg>; vdd_osc-supply = <&ldo4_reg>; vdd_pll-supply = <&ldo3_reg>; ddc = <&i2c_5>; status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; hdmi_to_mhl: endpoint { remote-endpoint = <&mhl_to_hdmi>; }; }; }; }; &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; dr_mode = "peripheral"; status = "okay"; }; &i2c_0 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <400000>; pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; status = "okay"; s5c73m3: image-sensor@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ vdd-int-supply = <&buck9_reg>; vddio-cis-supply = <&ldo9_reg>; vddio-host-supply = <&ldo18_reg>; vdd-af-supply = <&cam_af_reg>; vdd-reg-supply = <&cam_io_reg>; clock-frequency = <24000000>; /* CAM_A_CLKOUT */ clocks = <&camera 0>; clock-names = "cis_extclk"; status = "disabled"; port { s5c73m3_ep: endpoint { remote-endpoint = <&csis0_ep>; data-lanes = <1 2 3 4>; }; }; }; }; &i2c1_isp { pinctrl-0 = <&fimc_is_i2c1>; pinctrl-names = "default"; image-sensor@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; afvdd-supply = <&ldo19_reg>; clock-frequency = <24000000>; /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { remote-endpoint = <&csis1_ep>; data-lanes = <1>; }; }; }; }; &i2c_3 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <400000>; pinctrl-0 = <&i2c3_bus>; pinctrl-names = "default"; status = "okay"; }; &i2c_4 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; pinctrl-0 = <&i2c4_bus>; pinctrl-names = "default"; status = "okay"; wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&pmu_system_controller 0>, <&max77686 MAX77686_CLK_PMIC>; clock-names = "MCLK1", "MCLK2"; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&gpx3>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; #sound-dai-cells = <0>; wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x8000 0x0 0x0 0x0>; wlf,micbias-cfg = <0x2f 0x2b>; wlf,lineout1-feedback; wlf,lineout1-se; wlf,lineout2-se; wlf,ldoena-always-driven; AVDD2-supply = <&vbatt_reg>; DBVDD1-supply = <&ldo3_reg>; DBVDD2-supply = <&vbatt_reg>; DBVDD3-supply = <&vbatt_reg>; DCVDD-supply = <&ldo3_reg>; CPVDD-supply = <&vbatt_reg>; SPKVDD1-supply = <&vbatt_reg>; SPKVDD2-supply = <&vbatt_reg>; wlf,ldo1ena = <&gpj0 4 0>; wlf,ldo2ena = <&gpj0 4 0>; }; }; &i2c_5 { status = "okay"; }; &i2c_7 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; pinctrl-0 = <&i2c7_bus>; pinctrl-names = "default"; status = "okay"; max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max77686_irq>; pinctrl-names = "default"; wakeup-source; reg = <0x09>; #clock-cells = <1>; voltage-regulators { ldo1_reg: LDO1 { regulator-name = "VALIVE_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; ldo2_reg: LDO2 { regulator-name = "VM1M2_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo3_reg: LDO3 { regulator-name = "VCC_1.8V_AP"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo4_reg: LDO4 { regulator-name = "VCC_2.8V_AP"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; ldo5_reg: LDO5 { regulator-name = "VCC_1.8V_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo6_reg: LDO6 { regulator-name = "VMPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo7_reg: LDO7 { regulator-name = "VPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo8_reg: LDO8 { regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo9_reg: LDO9 { regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; ldo10_reg: LDO10 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo11_reg: LDO11 { regulator-name = "VABB1_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo12_reg: LDO12 { regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo13_reg: LDO13 { regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo14_reg: LDO14 { regulator-name = "VABB2_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo15_reg: LDO15 { regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-state-mem { regulator-on-in-suspend; }; }; ldo16_reg: LDO16 { regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; }; }; ldo17_reg: LDO17 { regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; ldo18_reg: LDO18 { regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo19_reg: LDO19 { regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo20_reg: LDO20 { regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo21_reg: LDO21 { regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; ldo22_reg: LDO22 { regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo23_reg: LDO23 { regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo24_reg: LDO24 { regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo25_reg: LDO25 { regulator-name = "LDO25"; }; ldo26_reg: LDO26 { regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; buck1_reg: BUCK1 { regulator-name = "VDD_MIF"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck2_reg: BUCK2 { regulator-name = "VDD_ARM"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; buck3_reg: BUCK3 { regulator-name = "VDD_INT"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck4_reg: BUCK4 { regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck5_reg: BUCK5 { regulator-name = "VMEM_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; buck6_reg: BUCK6 { regulator-name = "VCC_SUB_1.35V"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; buck7_reg: BUCK7 { regulator-name = "VCC_SUB_2.0V"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; buck8_reg: BUCK8 { regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; buck9_reg: BUCK9 { regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; }; }; }; }; &i2c_8 { status = "okay"; }; &i2s0 { pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; }; &mixer { status = "okay"; }; &mshc_0 { broken-cd; non-removable; card-detect-delay = <200>; vmmc-supply = <&ldo22_reg>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; bus-width = <8>; cap-mmc-highspeed; }; &pmu_system_controller { assigned-clocks = <&pmu_system_controller 0>; assigned-clock-parents = <&clock CLK_XUSBXTI>; }; &pinctrl_0 { pinctrl-names = "default"; pinctrl-0 = <&sleep0>; mhl_int: mhl-int-pins { samsung,pins = "gpf3-5"; samsung,pin-pud = ; }; i2c_mhl_bus: i2c-mhl-bus-pins { samsung,pins = "gpf0-4", "gpf0-6"; samsung,pin-function = ; samsung,pin-pud = ; samsung,pin-drv = ; }; sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); PIN_SLP(gpa0-2, INPUT, NONE); PIN_SLP(gpa0-3, INPUT, UP); PIN_SLP(gpa0-4, INPUT, NONE); PIN_SLP(gpa0-5, INPUT, DOWN); PIN_SLP(gpa0-6, INPUT, DOWN); PIN_SLP(gpa0-7, INPUT, UP); PIN_SLP(gpa1-0, INPUT, DOWN); PIN_SLP(gpa1-1, INPUT, DOWN); PIN_SLP(gpa1-2, INPUT, DOWN); PIN_SLP(gpa1-3, INPUT, DOWN); PIN_SLP(gpa1-4, INPUT, DOWN); PIN_SLP(gpa1-5, INPUT, DOWN); PIN_SLP(gpb-0, INPUT, NONE); PIN_SLP(gpb-1, INPUT, NONE); PIN_SLP(gpb-2, INPUT, NONE); PIN_SLP(gpb-3, INPUT, NONE); PIN_SLP(gpb-4, INPUT, DOWN); PIN_SLP(gpb-5, INPUT, UP); PIN_SLP(gpb-6, INPUT, DOWN); PIN_SLP(gpb-7, INPUT, DOWN); PIN_SLP(gpc0-0, INPUT, DOWN); PIN_SLP(gpc0-1, INPUT, DOWN); PIN_SLP(gpc0-2, INPUT, DOWN); PIN_SLP(gpc0-3, INPUT, DOWN); PIN_SLP(gpc0-4, INPUT, DOWN); PIN_SLP(gpc1-0, INPUT, NONE); PIN_SLP(gpc1-1, PREV, NONE); PIN_SLP(gpc1-2, INPUT, NONE); PIN_SLP(gpc1-3, INPUT, NONE); PIN_SLP(gpc1-4, INPUT, NONE); PIN_SLP(gpd0-0, INPUT, DOWN); PIN_SLP(gpd0-1, INPUT, DOWN); PIN_SLP(gpd0-2, INPUT, NONE); PIN_SLP(gpd0-3, INPUT, NONE); PIN_SLP(gpd1-0, INPUT, DOWN); PIN_SLP(gpd1-1, INPUT, DOWN); PIN_SLP(gpd1-2, INPUT, NONE); PIN_SLP(gpd1-3, INPUT, NONE); PIN_SLP(gpf0-0, INPUT, NONE); PIN_SLP(gpf0-1, INPUT, NONE); PIN_SLP(gpf0-2, INPUT, DOWN); PIN_SLP(gpf0-3, INPUT, DOWN); PIN_SLP(gpf0-4, INPUT, NONE); PIN_SLP(gpf0-5, INPUT, DOWN); PIN_SLP(gpf0-6, INPUT, NONE); PIN_SLP(gpf0-7, INPUT, DOWN); PIN_SLP(gpf1-0, INPUT, DOWN); PIN_SLP(gpf1-1, INPUT, DOWN); PIN_SLP(gpf1-2, INPUT, DOWN); PIN_SLP(gpf1-3, INPUT, DOWN); PIN_SLP(gpf1-4, INPUT, NONE); PIN_SLP(gpf1-5, INPUT, NONE); PIN_SLP(gpf1-6, INPUT, DOWN); PIN_SLP(gpf1-7, PREV, NONE); PIN_SLP(gpf2-0, PREV, NONE); PIN_SLP(gpf2-1, INPUT, DOWN); PIN_SLP(gpf2-2, INPUT, DOWN); PIN_SLP(gpf2-3, INPUT, DOWN); PIN_SLP(gpf2-4, INPUT, DOWN); PIN_SLP(gpf2-5, INPUT, DOWN); PIN_SLP(gpf2-6, INPUT, NONE); PIN_SLP(gpf2-7, INPUT, NONE); PIN_SLP(gpf3-0, INPUT, NONE); PIN_SLP(gpf3-1, PREV, NONE); PIN_SLP(gpf3-2, PREV, NONE); PIN_SLP(gpf3-3, PREV, NONE); PIN_SLP(gpf3-4, OUT1, NONE); PIN_SLP(gpf3-5, INPUT, DOWN); PIN_SLP(gpj0-0, PREV, NONE); PIN_SLP(gpj0-1, PREV, NONE); PIN_SLP(gpj0-2, PREV, NONE); PIN_SLP(gpj0-3, INPUT, DOWN); PIN_SLP(gpj0-4, PREV, NONE); PIN_SLP(gpj0-5, PREV, NONE); PIN_SLP(gpj0-6, INPUT, DOWN); PIN_SLP(gpj0-7, INPUT, DOWN); PIN_SLP(gpj1-0, INPUT, DOWN); PIN_SLP(gpj1-1, PREV, NONE); PIN_SLP(gpj1-2, PREV, NONE); PIN_SLP(gpj1-3, INPUT, DOWN); PIN_SLP(gpj1-4, INPUT, DOWN); }; }; &pinctrl_1 { pinctrl-names = "default"; pinctrl-0 = <&sleep1>; gpio_keys: gpio-keys-pins { samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3"; samsung,pin-pud = ; }; bt_shutdown: bt-shutdown-pins { samsung,pins = "gpl0-6"; samsung,pin-pud = ; }; bt_host_wakeup: bt-host-wakeup-pins { samsung,pins = "gpx2-6"; samsung,pin-pud = ; }; bt_device_wakeup: bt-device-wakeup-pins { samsung,pins = "gpx3-1"; samsung,pin-pud = ; }; max77686_irq: max77686-irq-pins { samsung,pins = "gpx0-7"; samsung,pin-pud = ; }; max77693_irq: max77693-irq-pins { samsung,pins = "gpx1-5"; samsung,pin-pud = ; }; max77693_fuel_irq: max77693-fuel-irq-pins { samsung,pins = "gpx2-3"; samsung,pin-pud = ; }; sdhci2_cd: sdhci2-cd-irq-pins { samsung,pins = "gpx3-4"; samsung,pin-pud = ; }; hdmi_hpd: hdmi-hpd-pins { samsung,pins = "gpx3-7"; samsung,pin-pud = ; }; sleep1: sleep-state { PIN_SLP(gpk0-0, PREV, NONE); PIN_SLP(gpk0-1, PREV, NONE); PIN_SLP(gpk0-2, OUT0, NONE); PIN_SLP(gpk0-3, PREV, NONE); PIN_SLP(gpk0-4, PREV, NONE); PIN_SLP(gpk0-5, PREV, NONE); PIN_SLP(gpk0-6, PREV, NONE); PIN_SLP(gpk1-0, INPUT, DOWN); PIN_SLP(gpk1-1, INPUT, DOWN); PIN_SLP(gpk1-2, INPUT, DOWN); PIN_SLP(gpk1-3, PREV, NONE); PIN_SLP(gpk1-4, PREV, NONE); PIN_SLP(gpk1-5, PREV, NONE); PIN_SLP(gpk1-6, PREV, NONE); PIN_SLP(gpk2-0, INPUT, DOWN); PIN_SLP(gpk2-1, INPUT, DOWN); PIN_SLP(gpk2-2, INPUT, DOWN); PIN_SLP(gpk2-3, INPUT, DOWN); PIN_SLP(gpk2-4, INPUT, DOWN); PIN_SLP(gpk2-5, INPUT, DOWN); PIN_SLP(gpk2-6, INPUT, DOWN); PIN_SLP(gpk3-0, OUT0, NONE); PIN_SLP(gpk3-1, INPUT, NONE); PIN_SLP(gpk3-2, INPUT, DOWN); PIN_SLP(gpk3-3, INPUT, NONE); PIN_SLP(gpk3-4, INPUT, NONE); PIN_SLP(gpk3-5, INPUT, NONE); PIN_SLP(gpk3-6, INPUT, NONE); PIN_SLP(gpl0-0, INPUT, DOWN); PIN_SLP(gpl0-1, INPUT, DOWN); PIN_SLP(gpl0-2, INPUT, DOWN); PIN_SLP(gpl0-3, INPUT, DOWN); PIN_SLP(gpl0-4, PREV, NONE); PIN_SLP(gpl0-6, PREV, NONE); PIN_SLP(gpl1-0, INPUT, DOWN); PIN_SLP(gpl1-1, INPUT, DOWN); PIN_SLP(gpl2-0, INPUT, DOWN); PIN_SLP(gpl2-1, INPUT, DOWN); PIN_SLP(gpl2-2, INPUT, DOWN); PIN_SLP(gpl2-3, INPUT, DOWN); PIN_SLP(gpl2-4, INPUT, DOWN); PIN_SLP(gpl2-5, INPUT, DOWN); PIN_SLP(gpl2-6, PREV, NONE); PIN_SLP(gpl2-7, INPUT, DOWN); PIN_SLP(gpm0-0, INPUT, DOWN); PIN_SLP(gpm0-1, INPUT, DOWN); PIN_SLP(gpm0-2, INPUT, DOWN); PIN_SLP(gpm0-3, INPUT, DOWN); PIN_SLP(gpm0-4, INPUT, DOWN); PIN_SLP(gpm0-5, INPUT, DOWN); PIN_SLP(gpm0-6, INPUT, DOWN); PIN_SLP(gpm0-7, INPUT, DOWN); PIN_SLP(gpm1-0, INPUT, DOWN); PIN_SLP(gpm1-1, INPUT, DOWN); PIN_SLP(gpm1-2, INPUT, NONE); PIN_SLP(gpm1-3, INPUT, NONE); PIN_SLP(gpm1-4, INPUT, NONE); PIN_SLP(gpm1-5, INPUT, NONE); PIN_SLP(gpm1-6, INPUT, DOWN); PIN_SLP(gpm2-0, INPUT, NONE); PIN_SLP(gpm2-1, INPUT, NONE); PIN_SLP(gpm2-2, INPUT, DOWN); PIN_SLP(gpm2-3, INPUT, DOWN); PIN_SLP(gpm2-4, INPUT, DOWN); PIN_SLP(gpm3-0, PREV, NONE); PIN_SLP(gpm3-1, PREV, NONE); PIN_SLP(gpm3-2, PREV, NONE); PIN_SLP(gpm3-3, OUT1, NONE); PIN_SLP(gpm3-4, INPUT, DOWN); PIN_SLP(gpm3-5, INPUT, DOWN); PIN_SLP(gpm3-6, INPUT, DOWN); PIN_SLP(gpm3-7, INPUT, DOWN); PIN_SLP(gpm4-0, INPUT, DOWN); PIN_SLP(gpm4-1, INPUT, DOWN); PIN_SLP(gpm4-2, INPUT, DOWN); PIN_SLP(gpm4-3, INPUT, DOWN); PIN_SLP(gpm4-4, INPUT, DOWN); PIN_SLP(gpm4-5, INPUT, DOWN); PIN_SLP(gpm4-6, INPUT, DOWN); PIN_SLP(gpm4-7, INPUT, DOWN); PIN_SLP(gpy0-0, INPUT, DOWN); PIN_SLP(gpy0-1, INPUT, DOWN); PIN_SLP(gpy0-2, INPUT, DOWN); PIN_SLP(gpy0-3, INPUT, DOWN); PIN_SLP(gpy0-4, INPUT, DOWN); PIN_SLP(gpy0-5, INPUT, DOWN); PIN_SLP(gpy1-0, INPUT, DOWN); PIN_SLP(gpy1-1, INPUT, DOWN); PIN_SLP(gpy1-2, INPUT, DOWN); PIN_SLP(gpy1-3, INPUT, DOWN); PIN_SLP(gpy2-0, PREV, NONE); PIN_SLP(gpy2-1, INPUT, DOWN); PIN_SLP(gpy2-2, INPUT, NONE); PIN_SLP(gpy2-3, INPUT, NONE); PIN_SLP(gpy2-4, INPUT, NONE); PIN_SLP(gpy2-5, INPUT, NONE); PIN_SLP(gpy3-0, INPUT, DOWN); PIN_SLP(gpy3-1, INPUT, DOWN); PIN_SLP(gpy3-2, INPUT, DOWN); PIN_SLP(gpy3-3, INPUT, DOWN); PIN_SLP(gpy3-4, INPUT, DOWN); PIN_SLP(gpy3-5, INPUT, DOWN); PIN_SLP(gpy3-6, INPUT, DOWN); PIN_SLP(gpy3-7, INPUT, DOWN); PIN_SLP(gpy4-0, INPUT, DOWN); PIN_SLP(gpy4-1, INPUT, DOWN); PIN_SLP(gpy4-2, INPUT, DOWN); PIN_SLP(gpy4-3, INPUT, DOWN); PIN_SLP(gpy4-4, INPUT, DOWN); PIN_SLP(gpy4-5, INPUT, DOWN); PIN_SLP(gpy4-6, INPUT, DOWN); PIN_SLP(gpy4-7, INPUT, DOWN); PIN_SLP(gpy5-0, INPUT, DOWN); PIN_SLP(gpy5-1, INPUT, DOWN); PIN_SLP(gpy5-2, INPUT, DOWN); PIN_SLP(gpy5-3, INPUT, DOWN); PIN_SLP(gpy5-4, INPUT, DOWN); PIN_SLP(gpy5-5, INPUT, DOWN); PIN_SLP(gpy5-6, INPUT, DOWN); PIN_SLP(gpy5-7, INPUT, DOWN); PIN_SLP(gpy6-0, INPUT, DOWN); PIN_SLP(gpy6-1, INPUT, DOWN); PIN_SLP(gpy6-2, INPUT, DOWN); PIN_SLP(gpy6-3, INPUT, DOWN); PIN_SLP(gpy6-4, INPUT, DOWN); PIN_SLP(gpy6-5, INPUT, DOWN); PIN_SLP(gpy6-6, INPUT, DOWN); PIN_SLP(gpy6-7, INPUT, DOWN); }; }; &pinctrl_2 { pinctrl-names = "default"; pinctrl-0 = <&sleep2>; sleep2: sleep-state { PIN_SLP(gpz-0, INPUT, DOWN); PIN_SLP(gpz-1, INPUT, DOWN); PIN_SLP(gpz-2, INPUT, DOWN); PIN_SLP(gpz-3, INPUT, DOWN); PIN_SLP(gpz-4, INPUT, DOWN); PIN_SLP(gpz-5, INPUT, DOWN); PIN_SLP(gpz-6, INPUT, DOWN); }; }; &pinctrl_3 { pinctrl-names = "default"; pinctrl-0 = <&sleep3>; sleep3: sleep-state { PIN_SLP(gpv0-0, INPUT, DOWN); PIN_SLP(gpv0-1, INPUT, DOWN); PIN_SLP(gpv0-2, INPUT, DOWN); PIN_SLP(gpv0-3, INPUT, DOWN); PIN_SLP(gpv0-4, INPUT, DOWN); PIN_SLP(gpv0-5, INPUT, DOWN); PIN_SLP(gpv0-6, INPUT, DOWN); PIN_SLP(gpv0-7, INPUT, DOWN); PIN_SLP(gpv1-0, INPUT, DOWN); PIN_SLP(gpv1-1, INPUT, DOWN); PIN_SLP(gpv1-2, INPUT, DOWN); PIN_SLP(gpv1-3, INPUT, DOWN); PIN_SLP(gpv1-4, INPUT, DOWN); PIN_SLP(gpv1-5, INPUT, DOWN); PIN_SLP(gpv1-6, INPUT, DOWN); PIN_SLP(gpv1-7, INPUT, DOWN); PIN_SLP(gpv2-0, INPUT, DOWN); PIN_SLP(gpv2-1, INPUT, DOWN); PIN_SLP(gpv2-2, INPUT, DOWN); PIN_SLP(gpv2-3, INPUT, DOWN); PIN_SLP(gpv2-4, INPUT, DOWN); PIN_SLP(gpv2-5, INPUT, DOWN); PIN_SLP(gpv2-6, INPUT, DOWN); PIN_SLP(gpv2-7, INPUT, DOWN); PIN_SLP(gpv3-0, INPUT, DOWN); PIN_SLP(gpv3-1, INPUT, DOWN); PIN_SLP(gpv3-2, INPUT, DOWN); PIN_SLP(gpv3-3, INPUT, DOWN); PIN_SLP(gpv3-4, INPUT, DOWN); PIN_SLP(gpv3-5, INPUT, DOWN); PIN_SLP(gpv3-6, INPUT, DOWN); PIN_SLP(gpv3-7, INPUT, DOWN); PIN_SLP(gpv4-0, INPUT, DOWN); }; }; &pwm { pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; samsung,pwm-outputs = <0>; status = "okay"; }; &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; clock-names = "rtc", "rtc_src"; }; &sdhci_2 { bus-width = <4>; cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; status = "okay"; }; &sdhci_3 { #address-cells = <1>; #size-cells = <0>; non-removable; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; pinctrl-names = "default"; pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; status = "okay"; brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpx2>; interrupts = <5 IRQ_TYPE_NONE>; interrupt-names = "host-wake"; }; }; &serial_0 { pinctrl-0 = <&uart0_data &uart0_fctl>; pinctrl-names = "default"; status = "okay"; bluetooth { compatible = "brcm,bcm4330-bt"; pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; pinctrl-names = "default"; max-speed = <3000000>; shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; clocks = <&max77686 MAX77686_CLK_PMIC>; }; }; &serial_1 { status = "okay"; }; &serial_2 { status = "okay"; }; &serial_3 { status = "okay"; }; &spi_1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; s5c73m3_spi: image-sensor@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; controller-data { samsung,spi-feedback-delay = <2>; }; }; }; &tmu { vtmu-supply = <&ldo10_reg>; status = "okay"; };