/* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; /include/ "imx6q.dtsi" / { model = "Freescale i.MX6 Quad SABRE Lite Board"; compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; memory { reg = <0x10000000 0x40000000>; }; soc { aips-bus@02000000 { /* AIPS1 */ spba-bus@02000000 { ecspi@02008000 { /* eCSPI1 */ fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; status = "okay"; flash: m25p80@0 { compatible = "sst,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; }; }; ssi1: ssi@02028000 { fsl,mode = "i2s-slave"; status = "okay"; }; }; }; aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ cd-gpios = <&gpio7 0 0>; wp-gpios = <&gpio7 1 0>; vmmc-supply = <®_3p3v>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ cd-gpios = <&gpio2 6 0>; wp-gpios = <&gpio2 7 0>; vmmc-supply = <®_3p3v>; status = "okay"; }; audmux@021d8000 { status = "okay"; }; uart2: serial@021e8000 { status = "okay"; }; i2c@021a0000 { /* I2C1 */ status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1>; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; }; }; }; regulators { compatible = "simple-bus"; reg_2p5v: 2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; reg_3p3v: 3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; };