/ { mbus { pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; #address-cells = <3>; #size-cells = <2>; bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 9>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; }; }; }; ocp@f1000000 { pinctrl: pin-controller@10000 { compatible = "marvell,88f6192-pinctrl"; reg = <0x10000 0x20>; pmx_nand: pmx-nand { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp18", "mpp19"; marvell,function = "nand"; }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; }; pmx_sata1: pmx-sata1 { marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; pmx_spi: pmx-spi { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; marvell,function = "spi"; }; pmx_twsi0: pmx-twsi0 { marvell,pins = "mpp8", "mpp9"; marvell,function = "twsi0"; }; pmx_uart0: pmx-uart0 { marvell,pins = "mpp10", "mpp11"; marvell,function = "uart0"; }; pmx_uart1: pmx-uart1 { marvell,pins = "mpp13", "mpp14"; marvell,function = "uart1"; }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; marvell,function = "sdio"; }; }; rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; status = "disabled"; }; sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; cap-mmc-highspeed; status = "disabled"; }; }; };