/* * linux/arch/arm/common/vic.c * * Copyright (C) 1999 - 2003 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #if defined(CONFIG_PM) /** * struct vic_device - VIC PM device * @sysdev: The system device which is registered. * @irq: The IRQ number for the base of the VIC. * @base: The register base for the VIC. * @resume_sources: A bitmask of interrupts for resume. * @resume_irqs: The IRQs enabled for resume. * @int_select: Save for VIC_INT_SELECT. * @int_enable: Save for VIC_INT_ENABLE. * @soft_int: Save for VIC_INT_SOFT. * @protect: Save for VIC_PROTECT. */ struct vic_device { struct sys_device sysdev; void __iomem *base; int irq; u32 resume_sources; u32 resume_irqs; u32 int_select; u32 int_enable; u32 soft_int; u32 protect; }; /* we cannot allocate memory when VICs are initially registered */ static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; static int vic_id; static inline struct vic_device *to_vic(struct sys_device *sys) { return container_of(sys, struct vic_device, sysdev); } #endif /* CONFIG_PM */ /** * vic_init2 - common initialisation code * @base: Base of the VIC. * * Common initialisation code for registration * and resume. */ static void vic_init2(void __iomem *base) { int i; for (i = 0; i < 16; i++) { void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); writel(VIC_VECT_CNTL_ENABLE | i, reg); } writel(32, base + VIC_PL190_DEF_VECT_ADDR); } #if defined(CONFIG_PM) static int vic_class_resume(struct sys_device *dev) { struct vic_device *vic = to_vic(dev); void __iomem *base = vic->base; printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); /* re-initialise static settings */ vic_init2(base); writel(vic->int_select, base + VIC_INT_SELECT); writel(vic->protect, base + VIC_PROTECT); /* set the enabled ints and then clear the non-enabled */ writel(vic->int_enable, base + VIC_INT_ENABLE); writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); /* and the same for the soft-int register */ writel(vic->soft_int, base + VIC_INT_SOFT); writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); return 0; } static int vic_class_suspend(struct sys_device *dev, pm_message_t state) { struct vic_device *vic = to_vic(dev); void __iomem *base = vic->base; printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); vic->int_select = readl(base + VIC_INT_SELECT); vic->int_enable = readl(base + VIC_INT_ENABLE); vic->soft_int = readl(base + VIC_INT_SOFT); vic->protect = readl(base + VIC_PROTECT); /* set the interrupts (if any) that are used for * resuming the system */ writel(vic->resume_irqs, base + VIC_INT_ENABLE); writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); return 0; } struct sysdev_class vic_class = { .name = "vic", .suspend = vic_class_suspend, .resume = vic_class_resume, }; /** * vic_pm_init - initicall to register VIC pm * * This is called via late_initcall() to register * the resources for the VICs due to the early * nature of the VIC's registration. */ static int __init vic_pm_init(void) { struct vic_device *dev = vic_devices; int err; int id; if (vic_id == 0) return 0; err = sysdev_class_register(&vic_class); if (err) { printk(KERN_ERR "%s: cannot register class\n", __func__); return err; } for (id = 0; id < vic_id; id++, dev++) { dev->sysdev.id = id; dev->sysdev.cls = &vic_class; err = sysdev_register(&dev->sysdev); if (err) { printk(KERN_ERR "%s: failed to register device\n", __func__); return err; } } return 0; } late_initcall(vic_pm_init); /** * vic_pm_register - Register a VIC for later power management control * @base: The base address of the VIC. * @irq: The base IRQ for the VIC. * @resume_sources: bitmask of interrupts allowed for resume sources. * * Register the VIC with the system device tree so that it can be notified * of suspend and resume requests and ensure that the correct actions are * taken to re-instate the settings on resume. */ static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources) { struct vic_device *v; if (vic_id >= ARRAY_SIZE(vic_devices)) printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); else { v = &vic_devices[vic_id]; v->base = base; v->resume_sources = resume_sources; v->irq = irq; vic_id++; } } #else static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { } #endif /* CONFIG_PM */ static void vic_ack_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); unsigned int irq = d->irq & 31; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); /* moreover, clear the soft-triggered, in case it was the reason */ writel(1 << irq, base + VIC_INT_SOFT_CLEAR); } static void vic_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); unsigned int irq = d->irq & 31; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); } static void vic_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); unsigned int irq = d->irq & 31; writel(1 << irq, base + VIC_INT_ENABLE); } #if defined(CONFIG_PM) static struct vic_device *vic_from_irq(unsigned int irq) { struct vic_device *v = vic_devices; unsigned int base_irq = irq & ~31; int id; for (id = 0; id < vic_id; id++, v++) { if (v->irq == base_irq) return v; } return NULL; } static int vic_set_wake(struct irq_data *d, unsigned int on) { struct vic_device *v = vic_from_irq(d->irq); unsigned int off = d->irq & 31; u32 bit = 1 << off; if (!v) return -EINVAL; if (!(bit & v->resume_sources)) return -EINVAL; if (on) v->resume_irqs |= bit; else v->resume_irqs &= ~bit; return 0; } #else #define vic_set_wake NULL #endif /* CONFIG_PM */ static struct irq_chip vic_chip = { .name = "VIC", .irq_ack = vic_ack_irq, .irq_mask = vic_mask_irq, .irq_unmask = vic_unmask_irq, .irq_set_wake = vic_set_wake, }; static void __init vic_disable(void __iomem *base) { writel(0, base + VIC_INT_SELECT); writel(0, base + VIC_INT_ENABLE); writel(~0, base + VIC_INT_ENABLE_CLEAR); writel(0, base + VIC_IRQ_STATUS); writel(0, base + VIC_ITCR); writel(~0, base + VIC_INT_SOFT_CLEAR); } static void __init vic_clear_interrupts(void __iomem *base) { unsigned int i; writel(0, base + VIC_PL190_VECT_ADDR); for (i = 0; i < 19; i++) { unsigned int value; value = readl(base + VIC_PL190_VECT_ADDR); writel(value, base + VIC_PL190_VECT_ADDR); } } static void __init vic_set_irq_sources(void __iomem *base, unsigned int irq_start, u32 vic_sources) { unsigned int i; for (i = 0; i < 32; i++) { if (vic_sources & (1 << i)) { unsigned int irq = irq_start + i; irq_set_chip(irq, &vic_chip); irq_set_handler(irq, handle_level_irq); irq_set_chip_data(irq, base); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } } /* * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. * The original cell has 32 interrupts, while the modified one has 64, * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case * the probe function is called twice, with base set to offset 000 * and 020 within the page. We call this "second block". */ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, u32 vic_sources) { unsigned int i; int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; /* Disable all interrupts initially. */ vic_disable(base); /* * Make sure we clear all existing interrupts. The vector registers * in this cell are after the second block of general registers, * so we can address them using standard offsets, but only from * the second base address, which is 0x20 in the page */ if (vic_2nd_block) { vic_clear_interrupts(base); /* ST has 16 vectors as well, but we don't enable them by now */ for (i = 0; i < 16; i++) { void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); writel(0, reg); } writel(32, base + VIC_PL190_DEF_VECT_ADDR); } vic_set_irq_sources(base, irq_start, vic_sources); } /** * vic_init - initialise a vectored interrupt controller * @base: iomem base address * @irq_start: starting interrupt number, must be muliple of 32 * @vic_sources: bitmask of interrupt sources to allow * @resume_sources: bitmask of interrupt sources to allow for resume */ void __init vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources) { unsigned int i; u32 cellid = 0; enum amba_vendor vendor; /* Identify which VIC cell this one is, by reading the ID */ for (i = 0; i < 4; i++) { u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); cellid |= (readl(addr) & 0xff) << (8 * i); } vendor = (cellid >> 12) & 0xff; printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", base, cellid, vendor); switch(vendor) { case AMBA_VENDOR_ST: vic_init_st(base, irq_start, vic_sources); return; default: printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); /* fall through */ case AMBA_VENDOR_ARM: break; } /* Disable all interrupts initially. */ vic_disable(base); /* Make sure we clear all existing interrupts */ vic_clear_interrupts(base); vic_init2(base); vic_set_irq_sources(base, irq_start, vic_sources); vic_pm_register(base, irq_start, resume_sources); }