/*
 * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
 *
 * arch/arm/mach-kirkwood/board-dreamplug.c
 *
 * Marvell DreamPlug Reference Board Init for drivers not converted to
 * flattened device tree yet.
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"

static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
};

static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
};

static struct mv_sata_platform_data dreamplug_sata_data = {
	.n_ports	= 1,
};

static struct mvsdio_platform_data dreamplug_mvsdio_data = {
	/* unfortunately the CD signal has not been connected */
};

static struct gpio_led dreamplug_led_pins[] = {
	{
		.name			= "dreamplug:blue:bluetooth",
		.gpio			= 47,
		.active_low		= 1,
	},
	{
		.name			= "dreamplug:green:wifi",
		.gpio			= 48,
		.active_low		= 1,
	},
	{
		.name			= "dreamplug:green:wifi_ap",
		.gpio			= 49,
		.active_low		= 1,
	},
};

static struct gpio_led_platform_data dreamplug_led_data = {
	.leds		= dreamplug_led_pins,
	.num_leds	= ARRAY_SIZE(dreamplug_led_pins),
};

static struct platform_device dreamplug_leds = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &dreamplug_led_data,
	}
};

static unsigned int dreamplug_mpp_config[] __initdata = {
	MPP0_SPI_SCn,
	MPP1_SPI_MOSI,
	MPP2_SPI_SCK,
	MPP3_SPI_MISO,
	MPP47_GPIO,	/* Bluetooth LED */
	MPP48_GPIO,	/* Wifi LED */
	MPP49_GPIO,	/* Wifi AP LED */
	0
};

void __init dreamplug_init(void)
{
	/*
	 * Basic setup. Needs to be called early.
	 */
	kirkwood_mpp_conf(dreamplug_mpp_config);

	kirkwood_ehci_init();
	kirkwood_ge00_init(&dreamplug_ge00_data);
	kirkwood_ge01_init(&dreamplug_ge01_data);
	kirkwood_sata_init(&dreamplug_sata_data);
	kirkwood_sdio_init(&dreamplug_mvsdio_data);

	platform_device_register(&dreamplug_leds);
}