/* * linux/arch/sh/kernel/io_7751se.c * * Copyright (C) 2002 David McCullough * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * * I/O routine for Hitachi 7751 SolutionEngine. * * Initial version only to support LAN access; some * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ #include #include #include #include #include #include #include "../../drivers/pci/pci-sh7751.h" #ifdef CONFIG_SH_SECUREEDGE5410 unsigned short secureedge5410_ioport; #endif /* * The SnapGear uses the built-in PCI controller (PCIC) * of the 7751 processor */ #define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) #define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) #define PCI_IO_AREA SH7751_PCI_IO_BASE #define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE #define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) static inline void delay(void) { ctrl_inw(0xa0000000); } static inline volatile __u16 *port2adr(unsigned int port) { maybebadio((unsigned long)port); return (volatile __u16*)port; } /* In case someone configures the kernel w/o PCI support: in that */ /* scenario, don't ever bother to check for PCI-window addresses */ /* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ #if defined(CONFIG_PCI) #define CHECK_SH7751_PCIIO(port) \ ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) #else #define CHECK_SH7751_PCIIO(port) (0) #endif /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) * is mapped through the PCI IO window. Stuff with high bits (PXSEG) * should be way beyond the window, and is used w/o translation for * compatibility. */ unsigned char snapgear_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; else if (CHECK_SH7751_PCIIO(port)) return *(volatile unsigned char *)PCI_IOMAP(port); else return (*port2adr(port))&0xff; } unsigned char snapgear_inb_p(unsigned long port) { unsigned char v; if (PXSEG(port)) v = *(volatile unsigned char *)port; else if (CHECK_SH7751_PCIIO(port)) v = *(volatile unsigned char *)PCI_IOMAP(port); else v = (*port2adr(port))&0xff; delay(); return v; } unsigned short snapgear_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; else if (CHECK_SH7751_PCIIO(port)) return *(volatile unsigned short *)PCI_IOMAP(port); else if (port >= 0x2000) return *port2adr(port); else maybebadio(port); return 0; } unsigned int snapgear_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; else if (CHECK_SH7751_PCIIO(port)) return *(volatile unsigned int *)PCI_IOMAP(port); else if (port >= 0x2000) return *port2adr(port); else maybebadio(port); return 0; } void snapgear_outb(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; else if (CHECK_SH7751_PCIIO(port)) *((unsigned char*)PCI_IOMAP(port)) = value; else *(port2adr(port)) = value; } void snapgear_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; else if (CHECK_SH7751_PCIIO(port)) *((unsigned char*)PCI_IOMAP(port)) = value; else *(port2adr(port)) = value; delay(); } void snapgear_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; else if (CHECK_SH7751_PCIIO(port)) *((unsigned short *)PCI_IOMAP(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else maybebadio(port); } void snapgear_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; else if (CHECK_SH7751_PCIIO(port)) *((unsigned long*)PCI_IOMAP(port)) = value; else maybebadio(port); } void snapgear_insl(unsigned long port, void *addr, unsigned long count) { maybebadio(port); } void snapgear_outsl(unsigned long port, const void *addr, unsigned long count) { maybebadio(port); }